1 2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
3 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
6 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
8 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
9 (cpu_flags_check_cpu64): This. Inline.
10 (uints_all_zero): New.
12 (uints_equal): Likewise
13 (UINTS_ALL_ZERO): Likewise
15 (UINTS_CLEAR): Likewise
16 (UINTS_EQUAL): Likewise
17 (cpu_flags_and): Likewise.
18 (cpu_flags_or): Likewise.
19 (operand_type_and): Likewise.
20 (operand_type_or): Likewise.
21 (operand_type_xor): Likewise.
22 (cpu_flags_not): Inline and use switch instead of loop.
23 (cpu_flags_match): Updated.
24 (operand_type_match): Likewise.
25 (smallest_imm_type): Likewise.
26 (set_cpu_arch): Likewise.
28 (md_assemble): Likewise.
29 (parse_insn): Likewise.
30 (optimize_imm): Likewise.
31 (match_template): Likewise.
32 (process_suffix): Likewise.
33 (update_imm): Likewise.
34 (finalize_imm): Likewise.
35 (process_operands): Likewise.
36 (build_modrm_byte): Likewise.
37 (i386_immediate): Likewise.
38 (i386_displacement): Likewise.
39 (i386_index_check): Likewise.
40 (i386_operand): Likewise.
41 (i386_target_format): Likewise.
42 (intel_e11): Likewise.
43 (operand_type): Remove implicitregister.
44 (operand_type_check): Updated. Inline.
45 (cpu_flags_all_zero): Removed.
46 (operand_type_all_zero): Likewise.
47 (i386_array_biop): Likewise.
48 (cpu_flags_biop): Likewise.
49 (operand_type_biop): Likewise.
51 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
53 * Makefile.am: Run "make dep-am".
54 * Makefile.in: Regenerate.
56 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
58 * configure.in (AC_CHECK_HEADERS): Add limits.h.
59 * configure: Regenerated.
60 * config.in: Likewise.
62 * config/tc-i386.c: Include "opcodes/i386-init.h".
63 (_i386_insn): Use i386_operand_type for types.
64 (cpu_arch_flags): Updated to new types with bitfield.
65 (cpu_arch_tune_flags): Likewise.
66 (cpu_arch_isa_flags): Likewise.
68 (i386_align_code): Likewise.
69 (set_code_flag): Likewise.
70 (set_16bit_gcc_code_flag): Likewise.
71 (set_cpu_arch): Likewise.
72 (md_assemble): Likewise.
73 (parse_insn): Likewise.
74 (process_operands): Likewise.
75 (output_branch): Likewise.
76 (output_jump): Likewise.
77 (parse_real_register): Likewise.
78 (mode_from_disp_size): Likewise.
79 (smallest_imm_type): Likewise.
81 (type_names): Likewise.
84 (swap_2_operands): Likewise.
85 (optimize_imm): Likewise.
86 (optimize_disp): Likewise.
87 (match_template): Likewise.
88 (check_string): Likewise.
89 (process_suffix): Likewise.
90 (check_byte_reg): Likewise.
91 (check_long_reg): Likewise.
92 (check_qword_reg): Likewise.
93 (check_word_reg): Likewise.
94 (finalize_imm): Likewise.
95 (build_modrm_byte): Likewise.
96 (output_insn): Likewise.
97 (disp_size): Likewise.
99 (output_disp): Likewise.
100 (output_imm): Likewise.
102 (i386_immediate): Likewise.
103 (i386_displacement): Likewise.
104 (i386_index_check): Likewise.
105 (i386_operand): Likewise.
106 (parse_real_register): Likewise.
107 (i386_intel_operand): Likewise.
108 (intel_e09): Likewise.
109 (intel_bracket_expr): Likewise.
110 (intel_e11): Likewise.
111 (cpu_arch_flags_not): New.
112 (cpu_flags_check_x64): Likewise.
113 (cpu_flags_all_zero): Likewise.
114 (cpu_flags_not): Likewise.
115 (i386_cpu_flags_biop): Likewise.
116 (cpu_flags_biop): Likewise.
117 (cpu_flags_match); Likewise.
121 (reg16_inoutportreg): Likewise.
125 (disp16_32): Likewise.
127 (baseindex): Likewise.
135 (imm16_32): Likewise.
136 (imm16_32s): Likewise.
137 (imm16_32_32s): Likewise.
138 (operand_type): Likewise.
139 (operand_type_check): Likewise.
140 (operand_type_match): Likewise.
141 (operand_type_register_match): Likewise.
142 (update_imm): Likewise.
143 (set_code_flag): Also update cpu_arch_flags_not.
144 (set_16bit_gcc_code_flag): Likewise.
145 (md_begin): Likewise.
146 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
147 Use cpu_flags_match to match instructions.
148 (i386_target_format): Update cpu_arch_isa_flags and
149 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
150 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
151 (match_template): Don't initialize overlap0, overlap1,
152 overlap2, overlap3 and operand_types.
153 (process_suffix): Handle crc32 with 64bit register.
155 (CONSISTENT_REGISTER_MATCH): Likewise.
157 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
160 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
162 * config/tc-i386.c (match_template): Handle invlpga, vmload,
163 vmrun and vmsave in SVME.
164 (process_suffix): Likewise.
166 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
168 * config/tc-i386.c (i386_index_check): Don't use RegRex
169 on the reg_type field.
170 (parse_real_register): Use `||' instead of `|'.
172 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
174 * config/tc-i386.c (process_operands): Remove segment override
175 check on SVME instructions.
176 (i386_index_check): Remove memory operand check on SVME
179 2007-09-04 Alan Modra <amodra@bigpond.net.au>
181 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
182 (md_assemble): Update init of insn. Use insn.reloc instead of
183 calculating from flag.
184 (get_imm): Set reloc rather than flag.
185 (calcop): Formatting.
187 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
189 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
191 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
193 * doc/c-arc.texi: Fix typo.
195 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
197 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
200 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
202 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
203 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
205 (m68k_cpus): Adjust 5407 entry.
207 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
209 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
210 (m68k_cpus): Define 51QE cpu.
212 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
213 Joseph Myers <joseph@codesourcery.com>
215 * as.c (main): Flush stderr before printing listings to ensure
216 consistent output order across platforms.
218 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
220 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
222 2007-08-24 Joseph Myers <joseph@codesourcery.com>
223 Paul Brook <paul@codesourcery.com>
226 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
227 * as.c (show_usage): Document --debug-prefix-map option.
228 (parse_args): Handle --debug-prefix-map.
229 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
230 * stabs.c (stabs_generate_asm_file): Remap debug paths.
231 * Makefile.am (GAS_CFILES): Add remap.c
232 (GENERIC_OBJS): Add remap.o.
233 Regenerate dependencies.
234 * Makefile.in: Regenerate.
235 * doc/as.texinfo (--debug-prefix-map): Document.
237 2007-08-24 Aurelien Jarno <aurel32@debian.org>
239 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
240 before printing them.
242 2007-08-24 Anders Waldenborg <anders@0x63.nu>
243 Alan Modra <amodra@bigpond.net.au>
245 * config/tc-i386.c (lex_got): Don't scan past a comma.
247 2007-08-23 Ben Elliston <bje@au.ibm.com>
249 * config/tc-ppc.c (parse_cpu): Handle "750cl".
250 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
251 (md_show_usage): Document -m750cl.
252 (md_assemble): Handle two delimiters in succession (eg. `),').
253 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
254 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
255 * testsuite/gas/ppc/ppc750ps.s: New file.
256 * testsuite/gas/ppc/ppc750ps.d: Likewise.
258 2007-08-23 Ben Elliston <bje@au.ibm.com>
260 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
262 2007-08-17 Alan Modra <amodra@bigpond.net.au>
265 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
267 (i386_immediate): Detect and complain about more cases of
268 invalid immediate expressions. Return failure rather than
269 converting them to zero.
270 (i386_displacement): Likewise.
272 2007-08-17 Alan Modra <amodra@bigpond.net.au>
274 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
276 2007-08-14 Andreas Schwab <schwab@suse.de>
278 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
281 2007-08-12 Matthias Klose <doko@ubuntu.com>
283 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
284 $(top_srcdir)/../../bfd/doc.
285 * doc/Makefile.in: Regenerate.
287 2007-08-10 Nick Clifton <nickc@redhat.com>
289 * NEWS: Add a marker for the 2.18 features.
291 2007-08-09 Paul Brook <paul@codesourcery.com>
293 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
295 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
297 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
299 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
301 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
302 DWORD memory to Reg64 in Intel synax.
303 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
304 Reg32 in Intel syntax.
306 2007-07-25 Sterling Augustine <sterling@tensilica.com>
308 * config/tc-xtensa.c (xtensa_extui_opcode): New.
309 (xg_expand_assembly_insn): Check for invalid extui operands.
310 (md_begin): Initialize xtensa_extui_opcode.
312 2007-07-24 Nick Clifton <nickc@redhat.com>
314 * config/tc-mep.h (skip_whitespace): Remove definition.
316 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
318 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
321 (f32_patt): Remove f32_15.
322 (f16_patt): Likewise.
323 (i386_align_code): Updated to alt_long_patt for 64bit by
326 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
328 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
330 * config/tc-i386.c (i386_align_code): Enable alignment up to
331 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
334 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
336 2007-07-20 Nick Clifton <nickc@redhat.com>
338 * app.c (do_scrub_chars): Provide a one character buffer to hold a
339 pushed back newline at the end of an unterminated quoted string.
341 2007-07-14 Nick Clifton <nickc@redhat.com>
343 * config/tc-arm.c (create_register_alias): Return a boolean rather
345 Check the return value of insert_reg_alias and do not continue to
346 create aliases once an insertion has failed.
347 (s_unreq): Delete the all-upper-case and all-lower-case
348 alternatives as well.
350 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
352 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
355 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
357 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
360 2007-07-04 Richard Sandiford <richard@codesourcery.com>
362 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
363 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
364 Deprecate *x and *fx.
365 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
368 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
370 * config/obj-coff.h (x86_64_target_format): Renamed to ...
371 (i386_target_format): This
372 (TARGET_FORMAT): Use i386_target_format.
374 * config/tc-i386.c (x86_64_target_format): Removed.
375 (i386_target_format): Handle PE formats.
377 2007-07-04 Nick Clifton <nickc@redhat.com>
379 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
380 to get the right length of printed value.
382 2007-07-03 Nick Clifton <nickc@redhat.com>
384 * COPYING: Replace with GPLv3 text.
385 * app.c: Update copyright notice to refer to GPLv3.
386 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
387 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
388 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
389 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
390 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
391 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
392 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
393 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
394 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
395 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
396 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
397 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
398 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
399 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
400 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
401 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
402 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
403 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
404 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
405 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
406 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
407 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
408 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
409 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
410 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
411 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
412 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
413 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
414 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
415 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
416 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
417 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
418 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
419 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
420 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
421 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
422 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
423 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
424 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
425 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
426 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
427 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
428 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
429 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
430 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
431 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
432 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
433 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
434 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
435 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
436 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
437 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
438 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
439 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
440 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
441 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
442 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
443 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
444 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
445 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
447 * flonum-mult.c: Likewise, and also correct typo referring to
448 non-existant GNU Assembler General Public License.
449 * config/tc-m68851.h: Likewise.
450 * NEWS: Mention the new license. Also note where the 2.17 release
452 * config/e-crisaout.c: Add copyright header.
453 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
454 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
455 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
456 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
457 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
458 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
459 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
460 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
461 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
462 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
463 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
464 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
465 config/te-wince-pe.h: Likewise.
467 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
469 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
470 (install_operand): Add E encoding.
471 (md_begin): Check and skip initial '.' arg character.
472 (get_num): Add 0..511 case.
474 2007-07-03 Alan Modra <amodra@bigpond.net.au>
477 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
478 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
480 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
483 * app.c (do_scrub_chars <state 5>): Check for output buffer full
486 2007-07-02 Joseph Myers <joseph@codesourcery.com>
488 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
489 s_dtprel_internal): New.
490 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
491 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
492 BFD_RELOC_MIPS_TLS_DTPREL64.
494 2007-07-02 Alan Modra <amodra@bigpond.net.au>
496 * Makefile.am: Run "make dep-am".
497 * Makefile.in: Regenerate.
498 * aclocal.m4: Regenerate.
499 * config.in: Regenerate.
500 * doc/Makefile.in: Regenerate.
501 * po/POTFILES.in: Regenerate.
502 * po/gas.pot: Regenerate.
504 2007-07-02 Alan Modra <amodra@bigpond.net.au>
506 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
507 coff section flag values to bfd section flag.
509 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
511 * aclocal.m4: Regenerated.
512 * doc/Makefile.in: Likewise.
513 * Makefile.in: Likewise.
515 2007-06-29 Joseph Myers <joseph@codesourcery.com>
517 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
519 2007-06-29 Joseph Myers <joseph@codesourcery.com>
521 * as.c (create_obj_attrs_section): New.
522 (main): Call create_obj_attrs_section for ELF.
523 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
524 skip_past_comma, s_vendor_attribute): New.
525 (potable): Add gnu_attribute for ELF.
526 * read.h (s_vendor_attribute): Declare.
527 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
528 round s_vendor_attribute.
529 (aeabi_set_public_attributes): Update for new attributes
531 (arm_md_end): Remove attributes contents setting now done
534 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
536 * Makefile.am: Add CR16 related entry.
537 * Makefile.in: Regenerate.
538 * config/tc-cr16.h: New file
539 * config/tc-cr16.c: New file
540 * doc/c-cr16.texi: New file for cr16
541 * doc/all.texi: Entry for cr16
542 * doc/Makefile.am: Added c-cr16.texi
543 * doc/Makefile.in: Regenerate
544 * doc/as.texinfo: Entry for CR16 target
545 * NEWS: Announce the support for the new target.
547 2007-06-26 Paul Brook <paul@codesourcery.com>
549 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
551 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
553 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
555 * config/tc-i386.c (process_operands): Replace regKludge
558 2007-06-25 Richard Sandiford <richard@codesourcery.com>
560 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
561 * config/tc-mips.c (append_insn): Record which symbols have
562 R_MIPS16_26 relocations against them.
563 (mips_fix_adjustable): Don't reduce relocations against such symbols.
565 2007-06-22 Sterling Augustine <sterling@tensilica.com>
567 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
568 (frag_format_size): Handle RELAX_IMMED_STEP3.
569 (xtensa_relax_frag, md_convert_frag): Likewise.
570 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
571 (RELAX_IMMED_MAXSTEPS): Adjust.
572 * config/xtensa-relax.c (widen_spec_list): Add transitions from
573 wide branches to branch-over-jumps.
574 (build_transition): Handle wide branches in transition patterns.
576 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
578 * config/tc-i386.c (disp_size): New.
579 (imm_size): Likewise.
580 (output_disp): Use disp_size and imm_size.
581 (output_imm): Use imm_size.
583 2007-06-19 Sterling Augustine <sterling@tensilica.com>
585 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
586 use of literal_frag field.
587 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
588 in the literal_frag field.
589 (xtensa_move_literals): Use it here instead of searching. Update
590 literal_frag field with new value.
592 2007-06-14 Paul Brook <paul@codesourcery.com>
594 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
595 narrow shift by immediate.
597 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
599 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
601 * acinclude.m4: Don't include m4 files.
602 (BFD_BINARY_FOPEN): Removed.
603 Remove libtool kludge.
605 * Makefile.in: Regenerated.
606 * doc/Makefile.in: Likewise.
607 * aclocal.m4: Likewise.
608 * configure: Likewise.
610 2007-06-11 Sterling Augustine <sterling@tensilica.com>
611 Bob Wilson <bob.wilson@acm.org>
613 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
614 (XTENSA_PROP_NO_TRANSFORM): ...this.
615 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
616 (xtensa_mark_frags_for_org): New.
617 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
618 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
619 (get_frag_property_flags): Adjust reference to is_no_transform flag.
620 (xtensa_frag_flags_combinable): Likewise.
621 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
622 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
624 2007-06-06 Paul Brook <paul@codesourcery.com>
626 * config/tc-arm.c (s_align): Pad code sections appropriately.
628 2007-06-05 Paul Brook <paul@codesourcery.com>
630 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
632 2007-06-05 Nick Clifton <nickc@redhat.com>
635 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
637 2007-06-05 Alan Modra <amodra@bigpond.net.au>
639 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
641 (tc_gen_reloc): Abort if neither addsy or subsy is set.
642 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
643 * config/tc-spu.h (md_operand): Handle @ppu without sym.
645 2007-05-31 Paul Brook <paul@codesourcery.com>
647 * config/tc-arm.c (insns): Allow strex on M profile cores.
649 2007-05-29 David S. Miller <davem@davemloft.net>
650 Jakub Jelinek <jakub@redhat.com>
653 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
654 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
656 2007-05-29 Alan Modra <amodra@bigpond.net.au>
658 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
660 2007-05-29 Alan Modra <amodra@bigpond.net.au>
662 * config/tc-ppc.c: Convert to ISO C.
663 * config/tc-ppc.c: Likewise.
665 2007-05-29 Alan Modra <amodra@bigpond.net.au>
667 * write.h (EXEC_MACHINE_TYPE): Delete.
668 (string_byte_count, section_alignment): Delete.
670 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
672 * app.c (do_scrub_chars): Cope with \ at end of buffer.
674 2007-05-26 Alan Modra <amodra@bigpond.net.au>
676 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
677 top 32 bits of 64 bit value if so doing results in passing
678 range check. Rewrite sign extension fudges similarly. Enable
679 fudges for powerpc64 too. Report user value if range check
680 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
681 range rather than value, also to report user value on failure.
683 2007-03-25 Paul Brook <paul@codesourcery.com>
685 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
686 (do_t_add_sub): Correctly encode subs pc, lr, #const.
687 (do_t_mov_cmp): Correctly encode movs pc, lr.
689 2007-05-24 Steve Ellcey <sje@cup.hp.com>
691 * Makefile.in: Regnerate.
692 * configure: Regenerate.
693 * aclocal.m4: Regenerate.
694 * doc/Makefile.in: Regenerate.
696 2007-05-22 Bob Wilson <bob.wilson@acm.org>
698 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
699 and index entries about automatic alignment of ENTRY instructions.
701 2007-05-22 Nick Clifton <nickc@redhat.com>
703 * doc/as.texinfo: Use @copying around the copyright notice.
705 2007-05-18 Joseph Myers <joseph@codesourcery.com>
707 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
710 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
713 2003-06-05 Michal Ludvig <mludvig@suse.cz>
714 * doc/as.texinfo: Document new directives: .cfi_restore,
715 .cfi_undefined, .cfi_same_value, .cfi_return_column,
716 .cfi_remember_state and .cfi_restore_state.
718 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
720 * config/tc-m68k.c (md_apply_fix): Show value of out of range
721 fixups in error message.
722 (md_conver_frag_1): Propagate the fix source location and use
723 as_bad_where rather than fatal, for better error messages.
725 2007-05-16 Paul Brook <paul@codesourcery.com>
727 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
729 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
731 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
733 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
736 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
737 addend is stored for relocs against weak symbols.
738 (md_apply_fix): So not loose track of addend for relocs against
741 2007-05-14 Thiemo Seufer <ths@mips.com>
743 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
745 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
747 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
748 addri, addri.c, subi, and subi.c when immediate number is hex.
749 (score_insns): Remove subis and subis.c.
750 (do_sub_rdi16): Delete.
752 2007-05-11 Alan Modra <amodra@bigpond.net.au>
754 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
756 (md_assemble): Tidy use of insn.flag.
757 (get_imm): Likewise. Handle uppercase input too.
758 (spu_cons): New function.
759 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
760 (TC_FORCE_RELOCATION): Don't resolve them either.
762 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
764 * config/tc-arm.c (md_apply_fix): Generate more accurate
765 diagnostic when 8-bit immediate range is exceeded for
766 BFD_RELOC_ARM_OFFSET_IMM8.
768 2007-05-04 Alan Modra <amodra@bigpond.net.au>
771 * config/tc-i386.c (lex_got): Don't replace the reloc token with
772 a space if we already have a space.
774 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
776 * config/tc-i386.c (match_template): Don't explicitly check
777 suffix for crc32 in Intel mode.
778 (process_suffix): Issue an error for crc32 if the operand size
781 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
782 Nick Clifton <nickc@redhat.com>
785 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
786 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
787 (md_apply_fix): Put zero values into the frags referencing weak
790 2007-05-02 Alan Modra <amodra@bigpond.net.au>
793 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
796 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
798 * config/tc-i386.c (match_template): Check suffix for crc32 in
800 (process_suffix): Default the suffix of 8bit crc32 to
802 (check_byte_reg): Skip check for 8bit crc32.
804 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
806 * config/tc-i386.c (md_assemble): Use register_prefix in
807 error/warning message.
808 (check_byte_reg): Likewise.
809 (check_long_reg): Likewise.
810 (check_qword_reg): Likewise.
811 (check_word_reg): Likewise.
812 (process_operands): Likewise.
814 2007-04-30 Alan Modra <amodra@bigpond.net.au>
817 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
820 2007-04-28 Thiemo Seufer <ths@networkno.de>
822 * config/tc-mips.c: Fix comment.
824 2007-04-26 Anatoly Sokolov <aesok@post.ru>
826 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
827 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
828 * doc/c-avr.texi: Document new devices.
830 2007-04-24 Alan Modra <amodra@bigpond.net.au>
832 * Makefile.am: Run "make dep-am".
833 * Makefile.in: Regenerate.
835 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
837 * config/tc-m68k.c (mcf54455_ctrl): New.
838 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
839 (m68k_archs): Add isac.
840 (m68k_cpus): Add 54455 family.
841 (m68k_ip): Split Bg into Bb, Bs, Bg.
842 (m68k_elf_final_processing): Add ISA_C.
843 * doc/c-m68k.texi (M680x0 Options): Add isac.
845 2007-04-22 Alan Modra <amodra@bigpond.net.au>
847 * read.c (read_a_source_file): Skip multiple spaces to
848 cover hack in mmix md_start_line_hook which overwrites a
849 colon with a space. Delete sermon and needless assertion.
851 2007-04-21 Alan Modra <amodra@bigpond.net.au>
853 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
854 (md_atof): Make number_of_chars unsigned. Revert last change.
855 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
856 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
857 * config/tc-sh.h (md_optimize_expr): Likewise.
858 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
860 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
862 2007-04-21 Nick Clifton <nickc@redhat.com>
864 * config/atof-vax.c (md_atof): Fix comparison inside know().
866 * config/tc-ia64.c (emit_one_bundle): Fix typo.
868 2007-04-21 Alan Modra <amodra@bigpond.net.au>
870 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
871 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
872 Don't skip over NUL char.
873 (pseudo_set): Set X_op for registers to O_register.
874 * symbols.c (symbol_clone): Remove assertion that sym is defined.
875 (resolve_symbol_value): Resolve O_register symbols.
876 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
877 Instead find st(0) by hash lookup.
878 * config/tc-ppc.c (ppc_macro): Warning fix.
880 * as.h (ENABLE_CHECKING): Default define to 0.
881 (know): Assert if ENABLE_CHECKING.
882 (struct relax_type): Remove superfluous declaration.
883 * configure.in (--enable-checking): New.
884 * configure: Regenerate.
885 * config.in: Regenerate.
886 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
887 Check for duplicate powerpc_operands entries.
889 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
891 * config/tc-m68k.c (mcf5253_ctrl): New.
892 (mcf52223_ctrl): New.
893 (m68k_cpus): Add 5253, 52221, 52223.
895 * config/m68k-parse.h (RAMBAR_ALT): New.
896 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
897 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
898 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
899 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
900 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
902 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
903 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
904 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
905 to control register mapping.
907 2007-04-20 Alan Modra <amodra@bigpond.net.au>
909 * messages.c (as_internal_value_out_of_range): Fix typo in
910 error message. Return after printing domain error.
911 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
912 in max when shifting right.
914 2007-04-20 Alan Modra <amodra@bigpond.net.au>
916 * messages.c (as_internal_value_out_of_range): Extend to report
917 errors for values with invalid low bits set.
918 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
919 fields. Check that operands and opcode fields are disjoint.
920 (ppc_insert_operand): Check operands using mask rather than bit
921 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
923 (md_apply_fix): Adjust for struct powerpc_operand change.
925 2007-04-19 Paul Brook <paul@codesourcery.com>
927 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
928 Thumb-1. Add sanity check for bogus relaxations.
930 2007-04-19 Paul Brook <paul@codesourcery.com>
932 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
934 2007-04-19 Alan Modra <amodra@bigpond.net.au>
936 * Makefile.am: Run "make dep-am".
937 * Makefile.in: Regenerate.
939 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
941 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
943 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
945 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
947 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
949 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
950 (match_template): Handle operand size for crc32 in SSE4.2.
951 (process_suffix): Handle operand type for crc32 in SSE4.2.
952 (output_insn): Support SSE4.2.
954 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
956 * config/tc-i386.c (cpu_arch): Add .sse4.1.
957 (process_operands): Adjust implicit operand for blendvpd,
958 blendvps and pblendvb in SSE4.1.
959 (output_insn): Support SSE4.1.
961 2007-04-18 Paul Brook <paul@codesourcery.com>
963 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
965 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
967 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
968 of as_warn_where for misaligned data.
970 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
972 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
975 2007-04-14 Steve Ellcey <sje@cup.hp.com>
977 * Makefile.am: Add ACLOCAL_AMFLAGS.
978 * Makefile.in: Regenerate.
980 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
982 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
983 (sh_optimize_expr): Likewise.
984 * config/tc-sh.h (md_optimize_expr): Define.
985 (sh_optimize_expr): Prototype.
987 2007-04-06 Matt Thomas <matt@netbsd.org>
989 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
990 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
991 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
993 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
995 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
997 2007-04-04 Paul Brook <paul@codesourcery.com>
999 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1000 (insns): Use I15 for vext.
1002 2007-04-04 Paul Brook <paul@codesourcery.com>
1004 * configure.tgt: Loosen checks for arm uclinux eabi targets.
1006 2007-04-02 Sterling Augustine <sterling@tensilica.com>
1008 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1009 outputting_stabs_line_debug.
1011 2007-03-26 Anatoly Sokolov <aesok@post.ru>
1013 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1014 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1016 * doc/c-avr.texi: Document new devices.
1018 2007-04-02 Richard Sandiford <richard@codesourcery.com>
1020 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1021 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1022 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1024 2007-03-30 Sterling Augustine <sterling@tensilica.com>
1025 Bob Wilson <bob.wilson@acm.org>
1027 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1028 Do not check is_loop_target flag.
1029 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1030 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
1031 xtensa_move_labels for alignment of loop opcodes.
1033 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
1035 * config/tc-i386.c (process_suffix): Reindent a bit.
1037 2007-03-30 Paul Brook <paul@codesourcery.com>
1039 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1040 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
1041 (do_t_push_pop): Use encode_thumb2_ldmstm.
1043 2007-03-29 DJ Delorie <dj@redhat.com>
1045 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1046 (md_relax_table): Add entries for ADJNZ macros.
1047 (M32C_Macros): Add ADJNZ macros.
1048 (subtype_mappings): Add entries for ADJNZ macros.
1049 (insn_to_subtype): Check for adjnz and sbjnz insns.
1050 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1051 (md_convert_frag): Convert adjnz and sbjnz.
1053 2007-03-29 Nick Clifton <nickc@redhat.com>
1055 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1057 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1058 using ITBL_NUMBER_OF_PROCESSORS.
1059 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1061 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1063 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1064 register operands, encode destination in i.rm.regmem if its
1067 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1068 Phil Edwards <phil@codesourcery.com>
1070 * doc/as.texinfo: Put the contents after the title page rather
1071 than at the end of the document.
1073 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1075 * NEWS: Mention ".reloc".
1077 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1079 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1080 in FLIX instructions.
1082 2007-03-26 Julian Brown <julian@codesourcery.com>
1084 * config/tc-arm.c (arm_it): Add immisfloat field.
1085 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1086 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1087 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1089 (neon_cmode_for_move_imm): Reject non-float immediates for float
1091 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1093 2007-03-26 Julian Brown <julian@codesourcery.com>
1095 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1097 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1099 * doc/as.texinfo (Reloc): Document.
1100 * read.c (potable): Add "reloc".
1101 (s_reloc): New function.
1102 * write.c (reloc_list): New global var.
1103 (resolve_reloc_expr_symbols): New function.
1104 (write_object_file): Call it.
1105 (write_relocs): Process reloc_list.
1106 * write.h (struct reloc_list): New.
1107 (reloc_list): Declare.
1109 2007-03-24 Paul Brook <paul@codesourcery.com>
1111 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1113 2007-03-24 Paul Brook <paul@codesourcery.com>
1114 Mark Shinwell <shinwell@codesourcery.com>
1116 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1117 (parse_operands): Don't expect comma if first operand missing.
1119 (do_srs): Encode register number, checking it is r13. Update comment.
1120 (insns): Update SRS entries to take a register.
1122 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1124 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1126 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1128 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1129 attempt to jump to the next instruction into NOPs.
1131 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1133 * config/tc-spu.c: Don't include opcode/spu.h.
1134 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1135 (md_apply_fix): Adjust.
1136 * config/tc-spu.h: Include opcode/spu.h.
1137 (struct tc_fix_info): New.
1138 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1139 (TC_FORCE_RELOCATION): Define.
1141 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1143 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1145 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1147 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1148 xchg for xchg %rax,%rax.
1150 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1152 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1153 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1155 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1158 * config/tc-i386.c (match_template): Properly handle 64bit mode
1161 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1164 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1166 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1168 * Makefile.am: Run dep-am.
1169 * Makefile.in: Regenerated.
1171 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1173 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1174 (NOP_OPCODE): Removed.
1175 (template): Likewise.
1177 2007-03-21 Andreas Schwab <schwab@suse.de>
1179 * config/tc-i386.h (NOP_OPCODE): Restore.
1181 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1183 * config/tc-arm.c (do_mul): Don't warn about overlapping
1184 Rd and Rm operands when assembling for v6 or above.
1185 Correctly capitalize register names in the messages.
1186 (do_mlas): Likewise. Delete spurious blank line.
1188 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1190 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1192 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1194 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1196 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1199 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1202 * app.c (do_scrub_chars): PUT after setting states.
1204 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1206 * Makefile.am: Run "make dep-am".
1207 * Makefile.in: Regenerated.
1209 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1211 (md_begin): Check reg_name != NULL for the last entry in
1214 * config/tc-i386.h: Move many entries to opcode/i386.h and
1217 * configure.in (need_opcodes): Set true for i386.
1218 * configure: Regenerated.
1220 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1222 * Makefile.am (REPORT_BUGS_TO): Removed.
1223 (INCLUDES): Remove -DREPORT_BUGS_TO.
1224 * Makefile.in: Regenerated.
1226 * configure.in (--with-bugurl): Removed.
1227 * configure: Regenerated.
1229 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1230 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1231 (TEXI2DVI): Likewise.
1232 (gasver.texi): Removed.
1233 (MOSTLYCLEANFILES): Remove gasver.texi.
1234 (as.1): Don't depend on gasver.texi.
1235 * doc/Makefile.in: Regenerated.
1237 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1239 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1241 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1242 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1243 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1244 * gas/symbols.c (copy_symbol_attributes): Use
1245 TC_COPY_SYMBOL_ATTRIBUTES.
1247 2007-03-14 Paul Brook <paul@codesourcery.com>
1249 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1251 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1254 * write.c (relax_segment): Insert extra alignment padding
1255 to break infinite relax loop when given impossible
1256 gcc_except_table assembly.
1258 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1260 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1261 on i.tm.base_opcode.
1262 (match_template): Likewise.
1263 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1265 * config/tc-i386.h (Opcode_D): New.
1266 (Opcode_FloatR): Likewise.
1267 (Opcode_FloatD): Likewise.
1270 (FloatMF): Likewise.
1274 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1276 * app.c (do_scrub_chars): Recognize comments after # line "file".
1277 * read.c (get_linefile_number): New.
1278 (s_app_line): Accept ill-formed .linefile lines as comments.
1280 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1282 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1284 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1286 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1287 * as.h (new_logical_line_flags): New.
1288 * input-scrub.c (new_logical_line): Turned into wrapper for...
1289 (new_logical_line_flags): this. Handle flags.
1290 * read.c (potable): Add linefile. Adjust appline argument.
1291 (s_app_file): Fake .appfiles no more.
1292 (s_app_line): For .linefile, accept file name and flags.
1294 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1296 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1298 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1300 * Makefile.am: Run "make dep-am".
1301 * Makefile.in: Regenerate.
1302 * po/POTFILES.in: Regenerate.
1304 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1306 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1308 * doc/Makefile.am (gasver.texi): Define BUGURL.
1309 * doc/as.texinfo: Use BUGURL.
1310 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1312 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1314 * config/tc-s390.c (md_parse_option): z9-ec option added.
1316 2007-03-02 Paul Brook <paul@codesourcery.com>
1318 * config/tc-arm.c (relax_immediate): Always return positive values.
1319 (relaxed_symbol_addr): New function.
1320 (relax_adr, relax_branch): Use it.
1321 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1323 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1325 * as.c (parse_args): Update copyright date.
1327 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1329 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1331 2007-02-28 Nick Clifton <nickc@redhat.com>
1334 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1335 just return -1 whenever a problem is encountered.
1336 (md_assemble): If do_assemble returns -1 generate a non-fatal
1337 error message and return.
1340 * config/tc-msp430.c (line_separator_char): Change to '{'.
1342 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1344 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1345 (build_jump_insn): Likewise.
1346 (build_insn): Likewise.
1347 (s_m68hc11_relax): Likewise.
1349 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1351 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1353 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1355 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1357 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1359 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1360 (md_assemble): Likewise.
1362 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1364 * write.c (size_seg): Always clear SEC_RELOC here.
1365 (install_reloc): New function, extracted from..
1366 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1367 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1368 testing frag size. Set SEC_RELOC here.
1370 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1373 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1375 2007-02-20 Thiemo Seufer <ths@mips.com>
1377 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1379 2007-02-20 Thiemo Seufer <ths@mips.com>
1381 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1383 2007-02-20 Thiemo Seufer <ths@mips.com>
1384 Chao-Ying Fu <fu@mips.com>
1386 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1387 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1388 (macro_build): Add case '2'.
1389 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1390 (validate_mips_insn): Add support for balign instruction.
1391 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1392 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1393 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1394 command line options.
1395 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1396 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1397 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1398 .set dspr2, .set nodspr2.
1400 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1402 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1403 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1405 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1407 * write.c (TC_FX_SIZE_SLACK): Define.
1408 (write_relocs): Reinstate check for fixup within frag.
1409 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1410 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1411 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1412 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1413 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1415 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1416 Nathan Sidwell <nathan@codesourcery.com>
1417 Vladimir Prus <vladimir@codesourcery.com
1418 Joseph Myers <joseph@codesourcery.com>
1420 * configure.in (--with-bugurl): New option.
1421 * configure: Regenerate.
1422 * dep-in.sed: Remove bin-bugs.h.
1423 * Makefile.am (REPORT_BUGS_TO): Define.
1424 (INCLUDES): Define REPORT_BUGS_TO.
1425 (DEP_INCLUDES): Likewise.
1426 ($(OBJS)): No longer depend on bin-bugs.h.
1427 * Makefile.in: Regenerate.
1428 * doc/Makefile.in: Regenerate.
1429 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1430 * as.h: Remove include of bin-bugs.h.
1432 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1434 * write.c: White space fixes.
1435 (fixup_segment): Move symbol_mri_common_p adjustments..
1436 (write_relocs): ..and symbol_equated_reloc_p adjustments..
1437 (adjust_reloc_syms): ..to here.
1439 2007-02-16 Alan Modra <amodra@bigpond.net.au>
1441 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1442 xmalloc, memset. Don't bother assigning NULL to known zero mem.
1443 (subseg_set_rest): Remove unnecessary cast.
1444 * write.c: Include libbfd.h. Replace PTR with void * throughout.
1445 Remove unnecessary forward declarations and casts.
1446 (set_symtab): Delete extern bfd_alloc.
1447 (fixup_segment): Move.
1449 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
1451 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1452 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1453 (mcf5475_ctrl, mcf5485_ctrl): New.
1454 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1455 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1456 (init_table): Add asid, mmubar, adjust rombar0.
1458 2007-02-14 Alan Modra <amodra@bigpond.net.au>
1460 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1461 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1462 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1463 code, and test for these insns using a combination of
1464 opcode_modifier and operand_types.
1466 2007-02-07 Paul Brook <paul@codesourcery.com>
1468 * configure.tgt: Add arm*-*-uclinux-*eabi.
1470 2007-02-05 Dave Brolley <brolley@redhat.com>
1471 Richard Sandiford <rsandifo@redhat.com>
1472 DJ Delorie <dj@redhat.com>
1473 Stan Cox <scox@redhat.com>
1474 Jim Blandy <jimb@redhat.com>
1475 Nick Clifton <nickc@redhat.com>
1476 Jim Wilson <wilson@redhat.com>
1477 Frank Ch. Eigler <fche@redhat.com>
1478 Graydon Hoare <graydon@redhat.com>
1479 Ben Elliston <bje@redhat.com>
1480 John Healy <jhealy@redhat.com>
1481 Richard Henderson <rth@redhat.com>
1483 * Makefile.am (CPU_TYPES): Add mep.
1484 (TARGET_CPU_CFILES): Add tc-mep.c.
1485 (TARGET_CPU_HFILES): Add tc-mep.h.
1486 (DEPTC_mep_elf): New variable.
1487 (DEPTC_mep_coff): Likewise.
1488 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1489 * configure.in: Support mep.
1490 * configure.tgt: Likewise.
1491 * config/tc-mep.c: New file.
1492 * config/obj-elf.c: New file.
1493 * config/tc-mep.c: New file.
1494 * config/tc-mep.h: New file.
1495 * testsuite/gas/mep: New testsuite with content.
1496 * Makefile.in: Regenerate.
1497 * configure: Regenerate.
1499 2007-02-05 Dave Brolley <brolley@redhat.com>
1501 * cgen.c (gas_cgen_install_complex_reloc): Removed.
1502 (complex_reloc_installation_howto): Removed.
1504 2007-02-05 Dave Brolley <brolley@redhat.com>
1505 Graydon Hoare <graydon@redhat.com>
1506 DJ Delorie <dj@redhat.com>
1507 Catherine Moore <clm@redhat.com>
1508 Michael Chastain <chastain@redhat.com>
1509 Frank Ch. Eigler <fche@redhat.com>
1511 * symbols.c (use_complex_relocs_for): New, to decide
1512 when to use complex relocs. Add signed RELC support.
1513 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1514 encode expression symbols as mangled complex relocation symbols (when
1515 compiled with -DOBJ_COMPLEX_RELOC).
1516 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1517 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
1518 encode_addend with new args. Modify to get start, length from
1519 ifield whenever it is set. Also change condition on which
1520 self-describing relocs are encoded. Add hook into
1521 gas_cgen_encode_addend.
1522 (queue_fixup_recursively): Add signed RELC support. Change from masked
1523 expr to trunc flag. Restore assignment of sub-field value to
1524 temporary in fixups array. Reflect changed meaning of last arg to
1525 queue_fixup_recursively.
1526 (fixup): Add cgen_maybe_multi_ifield member.
1527 (make_right_shifted_expr): New function.
1528 (queue_fixup): Change to recursive function that fragments
1529 fixups if operand has a multi-ifield.
1530 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1531 symbols, call weak_operand_overflow_check, and fragment call
1532 queue_fixup with operand fields.
1533 (gas_cgen_finish_insn) Modify to manage ifield pointer.
1534 (weak_operand_overflow_check): New function to try to select
1536 (gas_cgen_encode_addend): New function for relc.
1537 (gas_cgen_install_complex_reloc): Likewise.
1538 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1539 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1540 cgen_maybe_multi_ifield field to fx_cgen substructure.
1541 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1542 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1544 2007-02-03 DJ Delorie <dj@delorie.com>
1546 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
1548 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1549 (m32c_cons_fix_new): Prototype.
1551 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1553 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1554 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1556 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1558 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1559 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1560 (map_suffix_reloc_to_operator): New.
1561 (map_operator_to_reloc): New.
1562 (expression_maybe_register): Fix incorrect test of return value from
1563 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
1564 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1566 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1568 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1569 (tinsn_get_tok): Delete prototype.
1570 * config/tc-xtensa.c (tinsn_get_tok): Delete.
1572 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1574 * config/xtensa-relax.h (struct build_instr): Delete id field.
1575 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1577 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1578 set op_data fields to zero.
1579 (parse_id_constant): Delete.
1580 (build_transition): Remove code to handle numbered literals and labels.
1582 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1584 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1585 (build_transition_table): Likewise.
1587 2007-02-01 Bob Wilson <bob.wilson@acm.org>
1589 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1591 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1593 2007-02-02 Alan Modra <amodra@bigpond.net.au>
1595 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1596 (struct fix <fx_plt>): Rename to tcbit2.
1597 * write.c (fix_new_internal): Adjust.
1598 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1599 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1600 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1601 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1602 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1603 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1604 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1605 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1606 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1607 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1608 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1609 Instead, compare fx_r_type.
1610 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1611 fx_tcbit in place of fx_plt.
1612 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1613 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1616 2007-01-30 Nick Clifton <nickc@redhat.com>
1618 * as.c (main): Mark symbols created via the --defsym command line
1619 option as volatile so that they can be overridden later on by a
1620 .set directive. This maintains compatibility with the behaviour
1621 of earlier versions of the assembler.
1622 * doc/as.texinfo (--defsym): Document that the defined symbol's
1623 value can be overridden via a .set directive.
1625 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
1627 * config/tc-i386.c (swap_imm_operands): Renamed to ...
1628 (swap_2_operands): This. Take 2 ints.
1629 (md_assemble): Updated.
1630 (swap_operands): Call swap_2_operands to swap 2 operands.
1632 2007-01-24 DJ Delorie <dj@redhat.com>
1634 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1636 2007-01-22 Nick Clifton <nickc@redhat.com>
1639 * tc-score.c: Remove unnecessary uses of _().
1640 Make the err_msg[] a file level local array in order to save
1642 Remove unnecessary sprintf()s.
1644 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
1647 * config/tc-score.c : Using _() for const string.
1648 Do not assign inst.error with a local string pointer.
1649 (md_section_align): Pad section.
1651 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
1653 * config/tc-i386.c (build_modrm_byte): Check number of operands
1654 when procssing memory/register operand.
1656 2007-01-12 Nick Clifton <nickc@redhat.com>
1659 * macro.c (expand_irp): Do not ignore spaces inside quoted
1662 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1664 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1665 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1666 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1667 (TC_FORCE_RELOCATION): Define.
1668 (TC_FORCE_RELOCATION_LOCAL): Define.
1669 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1671 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1673 * input-file.c (input_file_open): Check fgets return.
1675 2007-01-11 Paul Brook <paul@codesourcery.com>
1677 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1679 2007-01-11 Nick Clifton <nickc@redhat.com>
1682 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1685 * config/tc-mcore.c (md_number_to_chars): Use
1686 number_to_chars_{big|little}endian.
1688 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
1690 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1691 architecture by itself.
1692 (m68k_ip): Don't issue a warning for tbl instructions on fido.
1693 (m68k_elf_final_processing): Treat Fido as an architecture by
1696 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
1698 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1700 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
1702 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1703 depending on allow_naked_reg.
1705 2007-01-04 Paul Brook <paul@codesourcery.com>
1707 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1709 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
1712 * config/tc-i386.c (register_prefix): New.
1713 (set_intel_syntax): Set set_intel_syntax to "" if register
1714 prefix isn't needed.
1715 (check_byte_reg): Use register_prefix for error message.
1716 (check_long_reg): Likewise.
1717 (check_qword_reg): Likewise.
1718 (check_word_reg): Likewise.
1720 2007-01-04 Julian Brown <julian@codesourcery.com>
1722 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1723 (do_neon_qshl_imm): Likewise.
1724 (do_neon_rshl): New function. Handle rounding variants of
1725 v{q}shl-by-register.
1726 (insns): Use do_neon_rshl for vrshl, vqrshl.
1728 2007-01-04 Paul Brook <paul@codesourcery.com>
1730 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1733 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1735 * config/tc-i386.c (swap_operands): Remove branches.
1737 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1739 * config/tc-i386.c: Update copyright year.
1740 * config/tc-i386.h: Likewise.
1742 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1744 * config/tc-i386.c (smallest_imm_type): Return unsigned int
1747 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1749 * config/tc-i386.c: Convert to ISO C90 formatting
1750 * config/tc-i386.h: Likewise.
1752 2007-01-03 David Daney <ddaney@avtrex.com>
1754 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
1757 For older changes see ChangeLog-2006
1763 version-control: never