gas/ChangeLog

   1 2007-10-11  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         * doc/c-i386.texi: Update which instruction's operands are
   4         swapped.
   5
   6 2007-10-11  Nick Clifton  <nickc@redhat.com>
   7
   8         PR gas/5161
   9         * config/tc-ia64.c: Allow for translations of error and warning
  10         messages.
  11         * po/gas.pot: Regenerate.
  12
  13         PR gas/5158
  14         * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error
  15         message.
  16         * po/gas.pot: Regenerate.
  17
  18         PR gas/5155
  19         * config/tc-msp430.c: Fix spelling typos.
  20
  21 2007-10-11  Nick Clifton  <nickc@redhat.com>
  22
  23         * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
  24
  25 2007-10-08  Maciej W. Rozycki  <macro@linux-mips.org>
  26
  27         * config/tc-mips.c (AT): Rename to...
  28         (ATREG): ... this.
  29         (AT): New definition.
  30         (mips_set_options): Rename "noat" to "at"; change the type.
  31         (mips_opts): Update accordingly.
  32         (append_insn): Likewise.
  33         (macro_build_ldst_constoffset): Likewise.
  34         (load_address): Likewise.
  35         (macro, macro2): Likewise.
  36         (s_mipsset): Handle ".set at=REG".  Update handling of ".set at"
  37         and ".set noat".
  38
  39 2007-10-08  Nick Clifton  <nickc@redhat.com>
  40
  41         * doc/as.texinfo (Previous): Clarify explanation of the behaviour
  42         of this pseudo-op and add a couple of examples.
  43
  44 2007-10-08  Nick Clifton  <nickc@redhat.com>
  45
  46         PR gas/5121 gas/5122 gas/5123
  47         * Makefile.am (CFILES): Add cgen.c
  48         (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
  49         tc-tic4x.c and xtensa-relax.c.
  50         (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
  51         tc-tic4x.h and xtensa-relax.h.
  52         (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
  53         te-ic960.h, te-linux.h.  Add te-aix5.h, te-armeabi.h,
  54         te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
  55         (CONFIG_ATOF_CFILES): New variable.
  56         (POTFILES): Add CONFIG_ATOF_CFILES to dependencies.  Fix typo with
  57         dependency upon TARG_ENV_HFILES.
  58         (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
  59         cgen-desc.h when foo-desc.h does not exit.
  60         Run make dep-am.
  61         * Makefile.in: Regenerate.
  62         * doc/Makefile.in: Regenerate.
  63         * po/POTFILES.in: Regenerate.
  64         PR gas/5124 gas/5125
  65         * po/es.po: Regenerate.
  66         * po/fr.po: Regenerate.
  67         * po/gas.pot: Regenerate.
  68         * po/rw.po: Regenerate.
  69         * po/tr.po: Regenerate.
  70         * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
  71         of error messages.
  72         PR gas/5126
  73         * config/obj-som.c: Likewise.
  74         PR gas/5129
  75         * config/tc-arc.c: Likewise.
  76         PR gas/5131 gas/5132
  77         * config/tc-arm.c: Likewise.
  78         PR gas/5137
  79         * config/tc-bfin.c: Likewise.
  80         PR gas/5143
  81         * config/tc-frv.c: Likewise.
  82         PR gas/5142
  83         * config/tc-dlx.c: Likewise.
  84
  85 2007-10-08  Eric B. Weddington  <eweddington@cso.atmel.com>
  86
  87         * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
  88         ATtiny48, AT90PWM216, AT90PWM316.
  89         * doc/c-avr.texi: Document new devices.
  90
  91 2007-10-08  Nick Clifton  <nickc@redhat.com>
  92
  93         PR gas/5133
  94         * config/tc-arm.c (md_apply_fix): Correct error message.
  95         PR gas/5134
  96         * config/tc-arm.c (md_apply_fix): Likewise.
  97         PR gas/5136
  98         * config/tc-bfin.c (md_apply_fix): Fix error message.
  99         PR gas/5135
 100         (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
 101
 102 2007-10-05  H.J. Lu  <hongjiu.lu@intel.com>
 103
 104         * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
 105         immediate operands directly for instructions with 4 operands.
 106
 107 2007-10-04  H.J. Lu  <hongjiu.lu@intel.com>
 108
 109         PR gas/5109
 110         * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
 111         is ignored in Intel mode.
 112
 113 2007-10-04  Helge Deller  <deller@gmx.de>
 114
 115         * read.c (potable): Add string8, string16, string32 and string64.
 116         Add bit size for stringer function.
 117         (stringer_append_char): New.
 118         (stringer): Use stringer_append_char().
 119         * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
 120         * config/obj-elf.c (obj_elf_ident): Likewise.
 121         * config/tc-alpha.c (s_alpha_stringer): Likewise.
 122         * config/tc-dlx.c (dlx_pseudo_table): Likewise.
 123         * config/tc-hppa.c (pa_stringer): Likewise.
 124         * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
 125         * config/tc-m68hc11.c (md_pseudo_table): Likewise.
 126         * config/tc-mcore.c (md_pseudo_table): Likewise.
 127         * config/tc-mips.c (mips_pseudo_table): Likewise.
 128         * config/tc-spu.c (md_pseudo_table): Likewise.
 129         * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
 130         * doc/as.texinfo (ABORT): Fix identing.
 131         (String): Document new string8, string16, string32, string64
 132         functions.
 133         * NEWS: Mention the new feature.
 134
 135 2007-10-03  Nick Clifton  <nickc@redhat.com>
 136
 137         PR gas/5078
 138         * config/tc-avr.c (avr_get_constant): Extend error message to
 139         mention that the constant must be positive.
 140
 141 2007-10-03  Nick Clifton  <nickc@redhat.com>
 142
 143         * config/tc-avr.c (avr_get_constant):
 144         PR gas/5089
 145         * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
 146         PR gas/5090
 147         (md_assemble): Fix spelling typo.
 148
 149 2007-10-03  Alan Modra  <amodra@bigpond.net.au>
 150
 151         PR 4303
 152         * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
 153
 154 2007-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 155
 156         * config/tc-cr16.c: Replaced 'tabs' with white spaces and
 157         added R_CR16_DISP8 as default reloc type for b<cc> instructions.
 158
 159 2007-09-30  H.J. Lu  <hongjiu.lu@intel.com>
 160
 161         PR gas/5080
 162         * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
 163         (check_qword_reg): Also handle cvttsd2si.
 164
 165 2007-09-27  Kazu Hirata  <kazu@codesourcery.com>
 166
 167         * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
 168         (last_movec_reg): Change to MBO.
 169         * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
 170         (m68k_ip): Use MBO instead of MBO.
 171         (init_table): Use MBO instead of MBO.  Add an entry for mbo.
 172
 173 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 174
 175         * config/tc-i386.c (build_modrm_byte): Also check for RegEip
 176         when considering IP-relative addressing.
 177
 178 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 179
 180         * config/tc-i386.h (md_register_arithmetic): Define.
 181         * config/tc-ia64.h (md_register_arithmetic): Likewise.
 182         * doc/internals.texi: Document md_register_arithmetic.
 183         * expr.c (make_expr_symbol): Force O_register expressions into
 184         reg_section.
 185         (expr): Provide default for md_register_arithmetic. Don't resolve
 186         adding/subtracting constants to/from registers if
 187         md_register_arithmetic is zero.
 188
 189 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 190
 191         * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
 192         (cfi_finish): Add second empty instance.
 193
 194 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 195
 196         * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
 197         with simple call to parse_operand.
 198
 199 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 200
 201         * config/tc-i386.c (NUM_FLAG_CODE): Remove.
 202
 203 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 204
 205         * as.c (itbl_parse): Remove #define.
 206         (struct itbl_file_list): Move down and ...
 207         (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
 208         (show_usage): Conditionalize printing of --itbl option upon
 209         HAVE_ITBL_CPU.
 210         (parse_args): Conditionalize handling of -t/--itbl options upon
 211         HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
 212         't'.
 213
 214 2007-09-25  H.J. Lu  <hongjiu.lu@intel.com>
 215
 216         * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
 217         check opcode length.
 218
 219 2007-09-25  Nathan Sidwell  <nathan@codesourcery.com>
 220
 221         * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
 222         (BRANCHBWPL, FRAG_VAR_SIZE): New.
 223         (md_relax_table): Add BRANCHBWPL entries.
 224         (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
 225         (md_assemble): Use FRAG_VAR_SIZE.
 226         (md_convert_frag_1): Add BRANCHBWPL cases.
 227         (md_estimate_size_before_relaz): Likewise.
 228
 229 2007-09-24  Carlos O'Donell  <carlos@codesourcery.com>
 230
 231         * config/tc-mips.c (s_align): Set max_alignment to 28.
 232
 233 2007-09-20  H.J. Lu  <hongjiu.lu@intel.com>
 234
 235         PR 658
 236         * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
 237         (set_allow_index_reg): New.
 238         (allow_index_reg): Likewise.
 239         (md_pseudo_table): Add "allow_index_reg" and
 240         "disallow_index_reg".
 241         (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
 242         fake index registers.
 243         (i386_scale): Updated.
 244         (i386_index_check): Support fake index registers.
 245         (parse_real_register): Return NULL on eiz/riz if fake index
 246         registers aren't allowed.
 247
 248 2007-09-19  Nick Clifton  <nickc@redhat.com>
 249
 250         * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
 251         fixups.
 252
 253 2007-09-19  Bob Wilson  <bob.wilson@acm.org>
 254
 255         * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
 256
 257 2007-09-18  Bernd Schmidt  <bernd.schmidt@analog.com>
 258
 259         * config/bfin-parse.y (asm_1): Slightly improve error messages
 260         for "reg += const;".
 261
 262 2007-09-18  Alan Modra  <amodra@bigpond.net.au>
 263
 264         PR gas/5026
 265         * read.c (emit_expr): Only use long long if required and available.
 266
 267 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 268
 269         * config/tc-i386.c (baseindex): Removed.
 270         (build_modrm_byte): Check reg_num for RIP register instead of
 271         reg_type.
 272         (i386_index_check): Likewise.
 273
 274 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 275
 276         PR gas/5035
 277         * config/obj-coff.c (obj_coff_endef): Remove checking size of
 278         def_symbol_in_progress.
 279
 280 2007-09-17  Evandro Menezes  <evandro@yahoo.com>
 281
 282         PR gas/5026
 283         * read.c (emit_expr): Use unsigned long long values in warning
 284         message about truncated expressions.
 285
 286 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 287
 288         * config/tc-i386.c (intel_e04): Revert the last change.
 289
 290 2007-09-17  Nick Clifton  <nickc@redhat.com>
 291
 292         * po/es.po: Updated Spanish translation.
 293
 294 2007-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 295
 296         PR gas/5034
 297         * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
 298         T_NIL.
 299
 300 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 301
 302         * config/tc-i386.c (build_modrm_byte): Adjust comment line
 303         wrap.
 304
 305 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 306
 307         * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
 308         of (A || B) != 0.
 309
 310 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 311
 312         * config/tc-i386.c (build_modrm_byte): Adjust indentation.
 313
 314 2007-09-14  Michael Meissner  <michael.meissner@amd.com>
 315             Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 316             Tony Linthicum  <tony.linthicum@amd.com>
 317
 318         * NEWS: Add SSE5 support to NEWS file.
 319
 320         * config/tc-i386.h (drex_byte): Add fields to allow process_drex
 321         and build_modrm_byte to communicate.
 322         (DREX_OC0): New SSE5 macro.
 323         (DREX_OC0_MASK): Ditto.
 324         (DREX_OC1): Ditto.
 325         (DREX_OC1_MASK): Ditto.
 326         (DREX_XMEM_X1_X2_X2): Ditto.
 327         (DREX_X1_XMEM_X2_X2): Ditto.
 328         (DREX_X1_XMEM_X2_X1: Ditto.
 329         (DREX_X1_X2_XMEM_X1: Ditto.
 330         (DREX_XMEM_X1_X2): Ditto.
 331         (DREX_X1_XMEM_X2): Ditto.
 332         (drex_byte): New structure to describe the DREX byte.
 333
 334         * config/tc-i386.c (process_drex): New function to handle SSE5
 335         DREX bits.
 336         (build_modrm_byte): Use the information cached away in
 337         process_drex in the case of DREX instructions.
 338         (i386_insn): Add drex field.
 339         (pi): Add debugging of drex field.
 340         (md_assemble): Treat SSE5 like SSE3 in instructions with an
 341         immediate byte.  Move REX field to DREX if this is a DREX
 342         instruction.
 343         (process_operands): Add SSE5 support.
 344         (build_modrm_byte): Ditto.
 345         (output_insn): Ditto.
 346         (cpu_arch): Ditto.
 347         (i386_align_code): Ditto.
 348
 349 2007-09-12  Jan Beulich  <jbeulich@novell.com>
 350
 351         * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
 352         after generic operand swapping, and swap only the immediate operands.
 353
 354 2007-09-11  Nathan Sidwell  <nathan@codesourcery.com>
 355
 356         * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
 357         (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
 358
 359 2007-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 360
 361         * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
 362         byte opcode.
 363
 364 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 365
 366         * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
 367         (cpu_flags_check_cpu64): This. Inline.
 368         (uints_all_zero): New.
 369         (uints_set): Likewise
 370         (uints_equal): Likewise
 371         (UINTS_ALL_ZERO): Likewise
 372         (UINTS_SET): Likewise
 373         (UINTS_CLEAR): Likewise
 374         (UINTS_EQUAL): Likewise
 375         (cpu_flags_and): Likewise.
 376         (cpu_flags_or): Likewise.
 377         (operand_type_and): Likewise.
 378         (operand_type_or): Likewise.
 379         (operand_type_xor): Likewise.
 380         (cpu_flags_not): Inline and use switch instead of loop.
 381         (cpu_flags_match): Updated.
 382         (operand_type_match): Likewise.
 383         (smallest_imm_type): Likewise.
 384         (set_cpu_arch): Likewise.
 385         (pt): Likewise.
 386         (md_assemble): Likewise.
 387         (parse_insn): Likewise.
 388         (optimize_imm): Likewise.
 389         (match_template): Likewise.
 390         (process_suffix): Likewise.
 391         (update_imm): Likewise.
 392         (finalize_imm): Likewise.
 393         (process_operands): Likewise.
 394         (build_modrm_byte): Likewise.
 395         (i386_immediate): Likewise.
 396         (i386_displacement): Likewise.
 397         (i386_index_check): Likewise.
 398         (i386_operand): Likewise.
 399         (i386_target_format): Likewise.
 400         (intel_e11): Likewise.
 401         (operand_type): Remove implicitregister.
 402         (operand_type_check): Updated. Inline.
 403         (cpu_flags_all_zero): Removed.
 404         (operand_type_all_zero): Likewise.
 405         (i386_array_biop): Likewise.
 406         (cpu_flags_biop): Likewise.
 407         (operand_type_biop): Likewise.
 408
 409 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 410
 411         * Makefile.am: Run "make dep-am".
 412         * Makefile.in: Regenerate.
 413
 414 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 415
 416         * configure.in (AC_CHECK_HEADERS): Add limits.h.
 417         * configure: Regenerated.
 418         * config.in: Likewise.
 419
 420         * config/tc-i386.c: Include "opcodes/i386-init.h".
 421         (_i386_insn): Use i386_operand_type for types.
 422         (cpu_arch_flags): Updated to new types with bitfield.
 423         (cpu_arch_tune_flags): Likewise.
 424         (cpu_arch_isa_flags): Likewise.
 425         (cpu_arch): Likewise.
 426         (i386_align_code): Likewise.
 427         (set_code_flag): Likewise.
 428         (set_16bit_gcc_code_flag): Likewise.
 429         (set_cpu_arch): Likewise.
 430         (md_assemble): Likewise.
 431         (parse_insn): Likewise.
 432         (process_operands): Likewise.
 433         (output_branch): Likewise.
 434         (output_jump): Likewise.
 435         (parse_real_register): Likewise.
 436         (mode_from_disp_size): Likewise.
 437         (smallest_imm_type): Likewise.
 438         (pi): Likewise.
 439         (type_names): Likewise.
 440         (pt): Likewise.
 441         (pte): Likewise.
 442         (swap_2_operands): Likewise.
 443         (optimize_imm): Likewise.
 444         (optimize_disp): Likewise.
 445         (match_template): Likewise.
 446         (check_string): Likewise.
 447         (process_suffix): Likewise.
 448         (check_byte_reg): Likewise.
 449         (check_long_reg): Likewise.
 450         (check_qword_reg): Likewise.
 451         (check_word_reg): Likewise.
 452         (finalize_imm): Likewise.
 453         (build_modrm_byte): Likewise.
 454         (output_insn): Likewise.
 455         (disp_size): Likewise.
 456         (imm_size): Likewise.
 457         (output_disp): Likewise.
 458         (output_imm): Likewise.
 459         (gotrel): Likewise.
 460         (i386_immediate): Likewise.
 461         (i386_displacement): Likewise.
 462         (i386_index_check): Likewise.
 463         (i386_operand): Likewise.
 464         (parse_real_register): Likewise.
 465         (i386_intel_operand): Likewise.
 466         (intel_e09): Likewise.
 467         (intel_bracket_expr): Likewise.
 468         (intel_e11): Likewise.
 469         (cpu_arch_flags_not): New.
 470         (cpu_flags_check_x64): Likewise.
 471         (cpu_flags_all_zero): Likewise.
 472         (cpu_flags_not): Likewise.
 473         (i386_cpu_flags_biop): Likewise.
 474         (cpu_flags_biop): Likewise.
 475         (cpu_flags_match); Likewise.
 476         (acc32): New.
 477         (acc64): Likewise.
 478         (control): Likewise.
 479         (reg16_inoutportreg): Likewise.
 480         (disp16): Likewise.
 481         (disp32): Likewise.
 482         (disp32s): Likewise.
 483         (disp16_32): Likewise.
 484         (anydisp): Likewise.
 485         (baseindex): Likewise.
 486         (regxmm): Likewise.
 487         (imm8): Likewise.
 488         (imm8s): Likewise.
 489         (imm16): Likewise.
 490         (imm32): Likewise.
 491         (imm32s): Likewise.
 492         (imm64): Likewise.
 493         (imm16_32): Likewise.
 494         (imm16_32s): Likewise.
 495         (imm16_32_32s): Likewise.
 496         (operand_type): Likewise.
 497         (operand_type_check): Likewise.
 498         (operand_type_match): Likewise.
 499         (operand_type_register_match): Likewise.
 500         (update_imm): Likewise.
 501         (set_code_flag): Also update cpu_arch_flags_not.
 502         (set_16bit_gcc_code_flag): Likewise.
 503         (md_begin): Likewise.
 504         (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
 505         Use cpu_flags_match to match instructions.
 506         (i386_target_format): Update cpu_arch_isa_flags and
 507         cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
 508         (smallest_imm_type): Check cpu_arch_tune to tune for i486.
 509         (match_template): Don't initialize overlap0, overlap1,
 510         overlap2, overlap3 and operand_types.
 511         (process_suffix): Handle crc32 with 64bit register.
 512         (MATCH): Removed.
 513         (CONSISTENT_REGISTER_MATCH): Likewise.
 514
 515         * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
 516         type.
 517
 518 2007-09-06  H.J. Lu  <hongjiu.lu@intel.com>
 519
 520         * config/tc-i386.c (match_template): Handle invlpga, vmload,
 521         vmrun and vmsave in SVME.
 522         (process_suffix): Likewise.
 523
 524 2007-09-05  H.J. Lu  <hongjiu.lu@intel.com>
 525
 526         * config/tc-i386.c (i386_index_check): Don't use RegRex
 527         on the reg_type field.
 528         (parse_real_register): Use `||' instead of `|'.
 529
 530 2007-09-04  H.J. Lu  <hongjiu.lu@intel.com>
 531
 532         * config/tc-i386.c (process_operands): Remove segment override
 533         check on SVME instructions.
 534         (i386_index_check): Remove memory operand check on SVME
 535         instructions.
 536
 537 2007-09-04  Alan Modra  <amodra@bigpond.net.au>
 538
 539         * config/tc-spu.c (struct spu_insn): Delete "flag".  Add "reloc".
 540         (md_assemble): Update init of insn.  Use insn.reloc instead of
 541         calculating from flag.
 542         (get_imm): Set reloc rather than flag.
 543         (calcop): Formatting.
 544
 545 2007-08-29  Daniel Jacobowitz  <dan@codesourcery.com>
 546
 547         * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
 548
 549 2007-08-28  Daniel Jacobowitz  <dan@codesourcery.com>
 550
 551         * doc/c-arc.texi: Fix typo.
 552
 553 2007-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 554
 555         * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
 556         Intel mode.
 557
 558 2007-08-28  Nathan Sidwell  <nathan@codesourcery.com>
 559
 560         * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
 561         (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
 562         (mcf5407_ctrl): New.
 563         (m68k_cpus): Adjust 5407 entry.
 564
 565 2007-08-28  Maxim Kuvyrkov  <maxim@codesourcery.com>
 566
 567         * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
 568         (m68k_cpus): Define 51QE cpu.
 569
 570 2007-08-28  Mark Shinwell  <shinwell@codesourcery.com>
 571             Joseph Myers  <joseph@codesourcery.com>
 572
 573         * as.c (main): Flush stderr before printing listings to ensure
 574         consistent output order across platforms.
 575
 576 2007-08-28  Robert Sebastian Gerus  <arachnist@gmail.com>
 577
 578         * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
 579
 580 2007-08-24  Joseph Myers  <joseph@codesourcery.com>
 581             Paul Brook  <paul@codesourcery.com>
 582
 583         * remap.c: New.
 584         * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
 585         * as.c (show_usage): Document --debug-prefix-map option.
 586         (parse_args): Handle --debug-prefix-map.
 587         * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
 588         * stabs.c (stabs_generate_asm_file): Remap debug paths.
 589         * Makefile.am (GAS_CFILES): Add remap.c
 590         (GENERIC_OBJS): Add remap.o.
 591         Regenerate dependencies.
 592         * Makefile.in: Regenerate.
 593         * doc/as.texinfo (--debug-prefix-map): Document.
 594
 595 2007-08-24  Aurelien Jarno  <aurel32@debian.org>
 596
 597         * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
 598         before printing them.
 599
 600 2007-08-24  Anders Waldenborg  <anders@0x63.nu>
 601             Alan Modra  <amodra@bigpond.net.au>
 602
 603         * config/tc-i386.c (lex_got): Don't scan past a comma.
 604
 605 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 606
 607         * config/tc-ppc.c (parse_cpu): Handle "750cl".
 608         (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
 609         (md_show_usage): Document -m750cl.
 610         (md_assemble): Handle two delimiters in succession (eg. `),').
 611         * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
 612         * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
 613         * testsuite/gas/ppc/ppc750ps.s: New file.
 614         * testsuite/gas/ppc/ppc750ps.d: Likewise.
 615
 616 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 617
 618         * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
 619
 620 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 621
 622         PR gas/4079
 623         * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
 624         expressions.
 625         (i386_immediate): Detect and complain about more cases of
 626         invalid immediate expressions.  Return failure rather than
 627         converting them to zero.
 628         (i386_displacement): Likewise.
 629
 630 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 631
 632         * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
 633
 634 2007-08-14  Andreas Schwab  <schwab@suse.de>
 635
 636         * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
 637         unrepresentable.
 638
 639 2007-08-12  Matthias Klose  <doko@ubuntu.com>
 640
 641         * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
 642         $(top_srcdir)/../../bfd/doc.
 643         * doc/Makefile.in: Regenerate.
 644
 645 2007-08-10  Nick Clifton  <nickc@redhat.com>
 646
 647         * NEWS: Add a marker for the 2.18 features.
 648
 649 2007-08-09  Paul Brook  <paul@codesourcery.com>
 650
 651         * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
 652
 653 2007-08-09  H.J. Lu  <hongjiu.lu@intel.com>
 654
 655         * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
 656
 657 2007-07-29  H.J. Lu  <hongjiu.lu@intel.com>
 658
 659         * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
 660         DWORD memory to Reg64 in Intel synax.
 661         (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
 662         Reg32 in Intel syntax.
 663
 664 2007-07-25  Sterling Augustine  <sterling@tensilica.com>
 665
 666         * config/tc-xtensa.c (xtensa_extui_opcode): New.
 667         (xg_expand_assembly_insn): Check for invalid extui operands.
 668         (md_begin): Initialize xtensa_extui_opcode.
 669
 670 2007-07-24  Nick Clifton  <nickc@redhat.com>
 671
 672         * config/tc-mep.h (skip_whitespace): Remove definition.
 673
 674 2007-07-23  H.J. Lu  <hongjiu.lu@intel.com>
 675
 676         * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
 677         (f32_15): Removed.
 678         (jump_31): New.
 679         (f32_patt): Remove f32_15.
 680         (f16_patt): Likewise.
 681         (i386_align_code): Updated to alt_long_patt for 64bit by
 682         default.
 683
 684         * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
 685
 686 2007-07-23  Evandro Menezes  <evandro.menezes@amd.com>
 687
 688         * config/tc-i386.c (i386_align_code): Enable alignment up to
 689         MAX_MEM_FOR_RS_ALIGN_CODE bytes.  Remove special treatment
 690         for K8.
 691
 692         * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
 693
 694 2007-07-20  Nick Clifton  <nickc@redhat.com>
 695
 696         * app.c (do_scrub_chars): Provide a one character buffer to hold a
 697         pushed back newline at the end of an unterminated quoted string.
 698
 699 2007-07-14  Nick Clifton  <nickc@redhat.com>
 700
 701         * config/tc-arm.c (create_register_alias): Return a boolean rather
 702         than an integer.
 703         Check the return value of insert_reg_alias and do not continue to
 704         create aliases once an insertion has failed.
 705         (s_unreq): Delete the all-upper-case and all-lower-case
 706         alternatives as well.
 707
 708 2007-07-12  Kai Tietz   <kai.tietz@onevision.com>
 709
 710         * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
 711         * write.c: Likewise.
 712
 713 2007-07-11  Daniel Jacobowitz  <dan@codesourcery.com>
 714
 715         * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
 716         HAVE_64BIT_SYMBOLS.
 717
 718 2007-07-04  Richard Sandiford  <richard@codesourcery.com>
 719
 720         * config/tc-mips.c (mips_cpu_info_table): Add new entries for
 721         {24k,24ke,34k,74k}f{2_1,1_1,x}.  Also add an entry for 74kf3_2.
 722         Deprecate *x and *fx.
 723         * doc/c-mips.texi: Document the new CPU arguments.  Deprecate
 724         *x and *fx.
 725
 726 2007-07-04  H.J. Lu  <hongjiu.lu@intel.com>
 727
 728         * config/obj-coff.h (x86_64_target_format): Renamed to ...
 729         (i386_target_format): This
 730         (TARGET_FORMAT): Use i386_target_format.
 731
 732         * config/tc-i386.c (x86_64_target_format): Removed.
 733         (i386_target_format): Handle PE formats.
 734
 735 2007-07-04  Nick Clifton  <nickc@redhat.com>
 736
 737         * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
 738         to get the right length of printed value.
 739
 740 2007-07-03  Nick Clifton  <nickc@redhat.com>
 741
 742         * COPYING: Replace with GPLv3 text.
 743         * app.c: Update copyright notice to refer to GPLv3.
 744         * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
 745         cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
 746         dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
 747         emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
 748         flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
 749         input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
 750         itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
 751         macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
 752         read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
 753         symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
 754         config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
 755         config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
 756         config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
 757         config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
 758         config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
 759         config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
 760         config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
 761         config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
 762         config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
 763         config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
 764         config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
 765         config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
 766         config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
 767         config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
 768         config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
 769         config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
 770         config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
 771         config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
 772         config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
 773         config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
 774         config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
 775         config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
 776         config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
 777         config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
 778         config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
 779         config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
 780         config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
 781         config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
 782         config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
 783         config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
 784         config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
 785         config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
 786         config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
 787         config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
 788         config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
 789         config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
 790         config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
 791         config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
 792         config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
 793         config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
 794         config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
 795         config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
 796         config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
 797         config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
 798         config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
 799         config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
 800         config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
 801         config/te-netware.h, config/te-sparcaout.h,  config/te-tmips.h,
 802         config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
 803         config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
 804
 805         * flonum-mult.c: Likewise, and also correct typo referring to
 806         non-existant GNU Assembler General Public License.
 807         * config/tc-m68851.h: Likewise.
 808         * NEWS: Mention the new license.  Also note where the 2.17 release
 809         happened.
 810         * config/e-crisaout.c: Add copyright header.
 811         * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
 812         config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
 813         config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
 814         config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
 815         config/te-generic.h, config/te-gnu.h, config/te-go32.h,
 816         config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
 817         config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
 818         config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
 819         config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
 820         config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
 821         config/te-pep.h, config/te-psos.h, config/te-riscix.h,
 822         config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
 823         config/te-wince-pe.h: Likewise.
 824
 825 2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
 826
 827         * config/tc-m68k.c (m68k_ip): Add j & K operand types.
 828         (install_operand): Add E encoding.
 829         (md_begin): Check and skip initial '.' arg character.
 830         (get_num): Add 0..511 case.
 831
 832 2007-07-03  Alan Modra  <amodra@bigpond.net.au>
 833
 834         PR 4713
 835         * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
 836         * config/obj-elf.h (obj_ecoff_set_ext): Comment.
 837
 838 2007-07-03  Mikkel Lauritsen  <renard@nospam.dk>
 839
 840         PR 4722
 841         * app.c (do_scrub_chars <state 5>): Check for output buffer full
 842         after memcpy.
 843
 844 2007-07-02  Joseph Myers  <joseph@codesourcery.com>
 845
 846         * config/tc-mips.c (s_dtprelword, s_dtpreldword,
 847         s_dtprel_internal): New.
 848         (mips_pseudo_table): Add .dtprelword and .dtpreldword.
 849         (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
 850         BFD_RELOC_MIPS_TLS_DTPREL64.
 851
 852 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 853
 854         * Makefile.am: Run "make dep-am".
 855         * Makefile.in: Regenerate.
 856         * aclocal.m4: Regenerate.
 857         * config.in: Regenerate.
 858         * doc/Makefile.in: Regenerate.
 859         * po/POTFILES.in: Regenerate.
 860         * po/gas.pot: Regenerate.
 861
 862 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 863
 864         * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
 865         coff section flag values to bfd section flag.
 866
 867 2007-06-30  H.J. Lu  <hongjiu.lu@intel.com>
 868
 869         * aclocal.m4: Regenerated.
 870         * doc/Makefile.in: Likewise.
 871         * Makefile.in: Likewise.
 872
 873 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 874
 875         * as.c (main): Only call create_obj_attrs_section if IS_ELF.
 876
 877 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 878
 879         * as.c (create_obj_attrs_section): New.
 880         (main): Call create_obj_attrs_section for ELF.
 881         * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
 882         skip_past_comma, s_vendor_attribute): New.
 883         (potable): Add gnu_attribute for ELF.
 884         * read.h (s_vendor_attribute): Declare.
 885         * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
 886         round s_vendor_attribute.
 887         (aeabi_set_public_attributes): Update for new attributes
 888         interfaces.
 889         (arm_md_end): Remove attributes contents setting now done
 890         generically.
 891
 892 2007-06-29  M R Swami Reddy  <MR.Swami.Redd@nsc.com>
 893
 894         * Makefile.am: Add CR16 related entry.
 895         * Makefile.in: Regenerate.
 896         * config/tc-cr16.h: New file
 897         * config/tc-cr16.c: New file
 898         * doc/c-cr16.texi: New file for cr16
 899         * doc/all.texi: Entry for cr16
 900         * doc/Makefile.am: Added c-cr16.texi
 901         * doc/Makefile.in: Regenerate
 902         * doc/as.texinfo: Entry for CR16 target
 903         * NEWS: Announce the support for the new target.
 904
 905 2007-06-26  Paul Brook  <paul@codesourcery.com>
 906
 907         * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
 908         for OP_RVC.
 909         (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
 910
 911 2007-06-25  H.J. Lu  <hongjiu.lu@intel.com>
 912
 913         * config/tc-i386.c (process_operands): Replace regKludge
 914         with RegKludge.
 915
 916 2007-06-25  Richard Sandiford  <richard@codesourcery.com>
 917
 918         * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
 919         * config/tc-mips.c (append_insn): Record which symbols have
 920         R_MIPS16_26 relocations against them.
 921         (mips_fix_adjustable): Don't reduce relocations against such symbols.
 922
 923 2007-06-22  Sterling Augustine  <sterling@tensilica.com>
 924
 925         * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
 926         (frag_format_size): Handle RELAX_IMMED_STEP3.
 927         (xtensa_relax_frag, md_convert_frag): Likewise.
 928         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
 929         (RELAX_IMMED_MAXSTEPS): Adjust.
 930         * config/xtensa-relax.c (widen_spec_list): Add transitions from
 931         wide branches to branch-over-jumps.
 932         (build_transition): Handle wide branches in transition patterns.
 933
 934 2007-06-22  H.J. Lu  <hongjiu.lu@intel.com>
 935
 936         * config/tc-i386.c (disp_size): New.
 937         (imm_size): Likewise.
 938         (output_disp): Use disp_size and imm_size.
 939         (output_imm): Use imm_size.
 940
 941 2007-06-19  Sterling Augustine  <sterling@tensilica.com>
 942
 943         * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
 944         use of literal_frag field.
 945         * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
 946         in the literal_frag field.
 947         (xtensa_move_literals): Use it here instead of searching.  Update
 948         literal_frag field with new value.
 949
 950 2007-06-14  Paul Brook  <paul@codesourcery.com>
 951
 952         * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
 953         narrow shift by immediate.
 954
 955 2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>
 956
 957         * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
 958
 959         * acinclude.m4: Don't include m4 files.
 960         (BFD_BINARY_FOPEN): Removed.
 961         Remove libtool kludge.
 962
 963         * Makefile.in: Regenerated.
 964         * doc/Makefile.in: Likewise.
 965         * aclocal.m4: Likewise.
 966         * configure: Likewise.
 967
 968 2007-06-11  Sterling Augustine  <sterling@tensilica.com>
 969             Bob Wilson  <bob.wilson@acm.org>
 970
 971         * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
 972         (XTENSA_PROP_NO_TRANSFORM): ...this.
 973         (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
 974         (xtensa_mark_frags_for_org): New.
 975         (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
 976         (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
 977         (get_frag_property_flags): Adjust reference to is_no_transform flag.
 978         (xtensa_frag_flags_combinable): Likewise.
 979         (frag_flags_to_number): Likewise.  Use XTENSA_PROP_NO_TRANSFORM.
 980         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
 981
 982 2007-06-06  Paul Brook  <paul@codesourcery.com>
 983
 984         * config/tc-arm.c (s_align): Pad code sections appropriately.
 985
 986 2007-06-05  Paul Brook  <paul@codesourcery.com>
 987
 988         * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
 989
 990 2007-06-05  Nick Clifton  <nickc@redhat.com>
 991
 992         PR gas/4587
 993         * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
 994
 995 2007-06-05  Alan Modra  <amodra@bigpond.net.au>
 996
 997         * config/tc-spu.c (spu_cons): Use deferred_expression.  Handle
 998         number@ppu.
 999         (tc_gen_reloc): Abort if neither addsy or subsy is set.
1000         (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
1001         * config/tc-spu.h (md_operand): Handle @ppu without sym.
1002
1003 2007-05-31  Paul Brook  <paul@codesourcery.com>
1004
1005         * config/tc-arm.c (insns): Allow strex on M profile cores.
1006
1007 2007-05-29  David S. Miller  <davem@davemloft.net>
1008             Jakub Jelinek  <jakub@redhat.com>
1009
1010         PR gas/4558
1011         * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
1012         for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
1013
1014 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1015
1016         * config/tc-spu.h: Wrap in #ifndef/#endif.  Delete coff macros.
1017
1018 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1019
1020         * config/tc-ppc.c: Convert to ISO C.
1021         * config/tc-ppc.c: Likewise.
1022
1023 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1024
1025         * write.h (EXEC_MACHINE_TYPE): Delete.
1026         (string_byte_count, section_alignment): Delete.
1027
1028 2007-05-28  Nathan Sidwell  <nathan@codesourcery.com>
1029
1030         * app.c (do_scrub_chars): Cope with \ at end of buffer.
1031
1032 2007-05-26  Alan Modra  <amodra@bigpond.net.au>
1033
1034         * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1035         top 32 bits of 64 bit value if so doing results in passing
1036         range check.  Rewrite sign extension fudges similarly.  Enable
1037         fudges for powerpc64 too.  Report user value if range check
1038         fails rather than fudged value.  Negate PPC_OPERAND_NEGATIVE
1039         range rather than value, also to report user value on failure.
1040
1041 2007-03-25  Paul Brook  <paul@codesourcery.com>
1042
1043         * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1044         (do_t_add_sub): Correctly encode subs pc, lr, #const.
1045         (do_t_mov_cmp): Correctly encode movs pc, lr.
1046
1047 2007-05-24  Steve Ellcey  <sje@cup.hp.com>
1048
1049         * Makefile.in: Regnerate.
1050         * configure: Regenerate.
1051         * aclocal.m4: Regenerate.
1052         * doc/Makefile.in: Regenerate.
1053
1054 2007-05-22  Bob Wilson  <bob.wilson@acm.org>
1055
1056         * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1057         and index entries about automatic alignment of ENTRY instructions.
1058
1059 2007-05-22  Nick Clifton  <nickc@redhat.com>
1060
1061         * doc/as.texinfo: Use @copying around the copyright notice.
1062
1063 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
1064
1065         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1066         containing a comma.
1067
1068 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
1069
1070         PR gas/4517
1071         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
1072         * doc/as.texinfo: Document new directives: .cfi_restore,
1073         .cfi_undefined, .cfi_same_value, .cfi_return_column,
1074         .cfi_remember_state and .cfi_restore_state.
1075
1076 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
1077
1078         * config/tc-m68k.c (md_apply_fix): Show value of out of range
1079         fixups in error message.
1080         (md_conver_frag_1): Propagate the fix source location and use
1081         as_bad_where rather than fatal, for better error messages.
1082
1083 2007-05-16  Paul Brook  <paul@codesourcery.com>
1084
1085         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1086
1087 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
1088
1089         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1090
1091 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
1092
1093         PR gas/3041
1094         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1095         addend is stored for relocs against weak symbols.
1096         (md_apply_fix): So not loose track of addend for relocs against
1097         weak symbols.
1098
1099 2007-05-14  Thiemo Seufer  <ths@mips.com>
1100
1101         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1102
1103 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
1104
1105         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1106         addri, addri.c, subi, and subi.c when immediate number is hex.
1107         (score_insns): Remove subis and subis.c.
1108         (do_sub_rdi16): Delete.
1109
1110 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
1111
1112         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
1113         spu_cons for word.
1114         (md_assemble): Tidy use of insn.flag.
1115         (get_imm): Likewise.  Handle uppercase input too.
1116         (spu_cons): New function.
1117         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1118         (TC_FORCE_RELOCATION): Don't resolve them either.
1119
1120 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
1121
1122         * config/tc-arm.c (md_apply_fix): Generate more accurate
1123         diagnostic when 8-bit immediate range is exceeded for
1124         BFD_RELOC_ARM_OFFSET_IMM8.
1125
1126 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
1127
1128         PR gas/4460
1129         * config/tc-i386.c (lex_got): Don't replace the reloc token with
1130         a space if we already have a space.
1131
1132 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
1133
1134         * config/tc-i386.c (match_template): Don't explicitly check
1135         suffix for crc32 in Intel mode.
1136         (process_suffix): Issue an error for crc32 if the operand size
1137         is ambiguous.
1138
1139 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
1140             Nick Clifton  <nickc@redhat.com>
1141
1142         PR gas/3041
1143         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1144         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1145         (md_apply_fix): Put zero values into the frags referencing weak
1146         symbols.
1147
1148 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
1149
1150         PR 4448
1151         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1152         PPC_OPERAND_PLUS1.
1153
1154 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
1155
1156         * config/tc-i386.c (match_template): Check suffix for crc32 in
1157         Intel mdoe.
1158         (process_suffix): Default the suffix of 8bit crc32 to
1159         BYTE_MNEM_SUFFIX.
1160         (check_byte_reg): Skip check for 8bit crc32.
1161
1162 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
1163
1164         * config/tc-i386.c (md_assemble): Use register_prefix in
1165         error/warning message.
1166         (check_byte_reg): Likewise.
1167         (check_long_reg): Likewise.
1168         (check_qword_reg): Likewise.
1169         (check_word_reg): Likewise.
1170         (process_operands): Likewise.
1171
1172 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
1173
1174         PR 4436
1175         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1176         min > max.
1177
1178 2007-04-28  Thiemo Seufer  <ths@networkno.de>
1179
1180         * config/tc-mips.c: Fix comment.
1181
1182 2007-04-26  Anatoly Sokolov <aesok@post.ru>
1183
1184         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1185         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1186         * doc/c-avr.texi: Document new devices.
1187
1188 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
1189
1190         * Makefile.am: Run "make dep-am".
1191         * Makefile.in: Regenerate.
1192
1193 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
1194
1195         * config/tc-m68k.c (mcf54455_ctrl): New.
1196         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1197         (m68k_archs): Add isac.
1198         (m68k_cpus): Add 54455 family.
1199         (m68k_ip): Split Bg into Bb, Bs, Bg.
1200         (m68k_elf_final_processing): Add ISA_C.
1201         * doc/c-m68k.texi (M680x0 Options): Add isac.
1202
1203 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
1204
1205         * read.c (read_a_source_file): Skip multiple spaces to
1206         cover hack in mmix md_start_line_hook which overwrites a
1207         colon with a space.  Delete sermon and needless assertion.
1208
1209 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1210
1211         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1212         (md_atof): Make number_of_chars unsigned.  Revert last change.
1213         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1214         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1215         * config/tc-sh.h (md_optimize_expr): Likewise.
1216         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1217         assertion.
1218         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1219
1220 2007-04-21  Nick Clifton  <nickc@redhat.com>
1221
1222         * config/atof-vax.c (md_atof): Fix comparison inside know().
1223
1224         * config/tc-ia64.c (emit_one_bundle): Fix typo.
1225
1226 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1227
1228         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1229         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1230         Don't skip over NUL char.
1231         (pseudo_set): Set X_op for registers to O_register.
1232         * symbols.c (symbol_clone): Remove assertion that sym is defined.
1233         (resolve_symbol_value): Resolve O_register symbols.
1234         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1235         Instead find st(0) by hash lookup.
1236         * config/tc-ppc.c (ppc_macro): Warning fix.
1237
1238         * as.h (ENABLE_CHECKING): Default define to 0.
1239         (know): Assert if ENABLE_CHECKING.
1240         (struct relax_type): Remove superfluous declaration.
1241         * configure.in (--enable-checking): New.
1242         * configure: Regenerate.
1243         * config.in: Regenerate.
1244         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1245         Check for duplicate powerpc_operands entries.
1246
1247 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
1248
1249         * config/tc-m68k.c (mcf5253_ctrl): New.
1250         (mcf52223_ctrl): New.
1251         (m68k_cpus): Add 5253, 52221, 52223.
1252
1253         * config/m68k-parse.h (RAMBAR_ALT): New.
1254         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1255         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1256         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1257         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1258         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1259         RAMBAR1.
1260         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1261         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1262         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
1263         to control register mapping.
1264
1265 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1266
1267         * messages.c (as_internal_value_out_of_range): Fix typo in
1268         error message.  Return after printing domain error.
1269         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1270         in max when shifting right.
1271
1272 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1273
1274         * messages.c (as_internal_value_out_of_range): Extend to report
1275         errors for values with invalid low bits set.
1276         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1277         fields.  Check that operands and opcode fields are disjoint.
1278         (ppc_insert_operand): Check operands using mask rather than bit
1279         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
1280         insertion code.
1281         (md_apply_fix): Adjust for struct powerpc_operand change.
1282
1283 2007-04-19  Paul Brook  <paul@codesourcery.com>
1284
1285         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1286         Thumb-1.  Add sanity check for bogus relaxations.
1287
1288 2007-04-19  Paul Brook  <paul@codesourcery.com>
1289
1290         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1291
1292 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
1293
1294         * Makefile.am: Run "make dep-am".
1295         * Makefile.in: Regenerate.
1296
1297 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
1298
1299         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1300
1301 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1302
1303         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1304
1305 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1306
1307         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1308         (match_template): Handle operand size for crc32 in SSE4.2.
1309         (process_suffix): Handle operand type for crc32 in SSE4.2.
1310         (output_insn): Support SSE4.2.
1311
1312 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1313
1314         * config/tc-i386.c (cpu_arch): Add .sse4.1.
1315         (process_operands): Adjust implicit operand for blendvpd,
1316         blendvps and pblendvb in SSE4.1.
1317         (output_insn): Support SSE4.1.
1318
1319 2007-04-18  Paul Brook  <paul@codesourcery.com>
1320
1321         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1322
1323 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1324
1325         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
1326         of as_warn_where for misaligned data.
1327
1328 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1329
1330         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1331         rs_fill frags.
1332
1333 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
1334
1335         * Makefile.am: Add ACLOCAL_AMFLAGS.
1336         * Makefile.in: Regenerate.
1337
1338 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1339
1340         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1341         (sh_optimize_expr): Likewise.
1342         * config/tc-sh.h (md_optimize_expr): Define.
1343         (sh_optimize_expr): Prototype.
1344
1345 2007-04-06  Matt Thomas  <matt@netbsd.org>
1346
1347         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1348         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
1349         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
1350
1351 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
1352
1353         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1354
1355 2007-04-04  Paul Brook  <paul@codesourcery.com>
1356
1357         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1358         (insns): Use I15 for vext.
1359
1360 2007-04-04  Paul Brook  <paul@codesourcery.com>
1361
1362         * configure.tgt: Loosen checks for arm uclinux eabi targets.
1363
1364 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
1365
1366         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1367         outputting_stabs_line_debug.
1368
1369 2007-03-26  Anatoly Sokolov <aesok@post.ru>
1370
1371         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1372         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1373         devices.
1374         * doc/c-avr.texi: Document new devices.
1375
1376 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
1377
1378         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1379         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1380         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1381
1382 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
1383             Bob Wilson  <bob.wilson@acm.org>
1384
1385         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1386         Do not check is_loop_target flag.
1387         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1388         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
1389         xtensa_move_labels for alignment of loop opcodes.
1390
1391 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
1392
1393         * config/tc-i386.c (process_suffix): Reindent a bit.
1394
1395 2007-03-30  Paul Brook  <paul@codesourcery.com>
1396
1397         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1398         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
1399         (do_t_push_pop):  Use encode_thumb2_ldmstm.
1400
1401 2007-03-29  DJ Delorie  <dj@redhat.com>
1402
1403         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1404         (md_relax_table): Add entries for ADJNZ macros.
1405         (M32C_Macros): Add ADJNZ macros.
1406         (subtype_mappings): Add entries for ADJNZ macros.
1407         (insn_to_subtype): Check for adjnz and sbjnz insns.
1408         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1409         (md_convert_frag): Convert adjnz and sbjnz.
1410
1411 2007-03-29  Nick Clifton  <nickc@redhat.com>
1412
1413         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1414         initialization.
1415         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1416         using ITBL_NUMBER_OF_PROCESSORS.
1417         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1418
1419 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
1420
1421         * config/tc-i386.c (build_modrm_byte): For instructions with 2
1422         register operands, encode destination in i.rm.regmem if its
1423         RegMem bit is set.
1424
1425 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
1426             Phil Edwards  <phil@codesourcery.com>
1427
1428         * doc/as.texinfo: Put the contents after the title page rather
1429         than at the end of the document.
1430
1431 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
1432
1433         * NEWS: Mention ".reloc".
1434
1435 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
1436
1437         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1438         in FLIX instructions.
1439
1440 2007-03-26  Julian Brown  <julian@codesourcery.com>
1441
1442         * config/tc-arm.c (arm_it): Add immisfloat field.
1443         (parse_qfloat_immediate): Disallow integer syntax for floating-point
1444         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1445         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1446         float.
1447         (neon_cmode_for_move_imm): Reject non-float immediates for float
1448         operands.
1449         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1450
1451 2007-03-26  Julian Brown  <julian@codesourcery.com>
1452
1453         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1454
1455 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
1456
1457         * doc/as.texinfo (Reloc): Document.
1458         * read.c (potable): Add "reloc".
1459         (s_reloc): New function.
1460         * write.c (reloc_list): New global var.
1461         (resolve_reloc_expr_symbols): New function.
1462         (write_object_file): Call it.
1463         (write_relocs): Process reloc_list.
1464         * write.h (struct reloc_list): New.
1465         (reloc_list): Declare.
1466
1467 2007-03-24  Paul Brook  <paul@codesourcery.com>
1468
1469         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1470
1471 2007-03-24  Paul Brook  <paul@codesourcery.com>
1472         Mark Shinwell  <shinwell@codesourcery.com>
1473
1474         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1475         (parse_operands): Don't expect comma if first operand missing.
1476         Handle OP_oRRw.
1477         (do_srs): Encode register number, checking it is r13.  Update comment.
1478         (insns): Update SRS entries to take a register.
1479
1480 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
1481
1482         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1483
1484 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
1485
1486         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1487         attempt to jump to the next instruction into NOPs.
1488
1489 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
1490
1491         * config/tc-spu.c: Don't include opcode/spu.h.
1492         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1493         (md_apply_fix): Adjust.
1494         * config/tc-spu.h: Include opcode/spu.h.
1495         (struct tc_fix_info): New.
1496         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1497         (TC_FORCE_RELOCATION): Define.
1498
1499 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
1500
1501         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1502
1503 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1504
1505         * config/tc-i386.c (process_suffix): Check 0x90 instead of
1506         xchg for xchg %rax,%rax.
1507
1508 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1509
1510         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1511         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1512
1513 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1514
1515         PR binutils/4218
1516         * config/tc-i386.c (match_template): Properly handle 64bit mode
1517         "xchg %eax, %eax".
1518
1519 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
1520
1521         PR gas/4124
1522         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1523
1524 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1525
1526         * Makefile.am: Run dep-am.
1527         * Makefile.in: Regenerated.
1528
1529         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1530
1531         * config/tc-i386.h: Include "opcodes/i386-opc.h".
1532         (NOP_OPCODE): Removed.
1533         (template): Likewise.
1534
1535 2007-03-21  Andreas Schwab  <schwab@suse.de>
1536
1537         * config/tc-i386.h (NOP_OPCODE): Restore.
1538
1539 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
1540
1541         * config/tc-arm.c (do_mul): Don't warn about overlapping
1542         Rd and Rm operands when assembling for v6 or above.
1543         Correctly capitalize register names in the messages.
1544         (do_mlas): Likewise.  Delete spurious blank line.
1545
1546 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
1547
1548         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1549
1550 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1551
1552         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1553         i386_regtab.
1554         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1555         on i386_regtab.
1556
1557 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
1558
1559         PR gas/4184
1560         * app.c (do_scrub_chars): PUT after setting states.
1561
1562 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1563
1564         * Makefile.am: Run "make dep-am".
1565         * Makefile.in: Regenerated.
1566
1567         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1568         "opcode/i386.h".
1569         (md_begin): Check reg_name != NULL for the last entry in
1570         i386_regtab.
1571
1572         * config/tc-i386.h: Move many entries to opcode/i386.h and
1573         opcodes/i386-opc.h.
1574
1575         * configure.in (need_opcodes): Set true for i386.
1576         * configure: Regenerated.
1577
1578 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1579
1580         * Makefile.am (REPORT_BUGS_TO): Removed.
1581         (INCLUDES): Remove -DREPORT_BUGS_TO.
1582         * Makefile.in: Regenerated.
1583
1584         * configure.in (--with-bugurl): Removed.
1585         * configure: Regenerated.
1586
1587         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1588         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1589         (TEXI2DVI): Likewise.
1590         (gasver.texi): Removed.
1591         (MOSTLYCLEANFILES): Remove gasver.texi.
1592         (as.1): Don't depend on gasver.texi.
1593         * doc/Makefile.in: Regenerated.
1594
1595         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1596
1597 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
1598
1599         * config/tc-arm.c (arm_copy_symbol_attributes): New.
1600         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1601         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1602         * gas/symbols.c (copy_symbol_attributes): Use
1603         TC_COPY_SYMBOL_ATTRIBUTES.
1604
1605 2007-03-14  Paul Brook  <paul@codesourcery.com>
1606
1607         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1608
1609 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
1610
1611         PR 4029
1612         * write.c (relax_segment): Insert extra alignment padding
1613         to break infinite relax loop when given impossible
1614         gcc_except_table assembly.
1615
1616 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
1617
1618         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1619         on i.tm.base_opcode.
1620         (match_template): Likewise.
1621         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1622
1623         * config/tc-i386.h (Opcode_D): New.
1624         (Opcode_FloatR): Likewise.
1625         (Opcode_FloatD): Likewise.
1626         (D): Redefined.
1627         (W): Likewise.
1628         (FloatMF): Likewise.
1629         (FloatR): Likewise.
1630         (FloatD): Likewise.
1631
1632 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1633
1634         * app.c (do_scrub_chars): Recognize comments after # line "file".
1635         * read.c (get_linefile_number): New.
1636         (s_app_line): Accept ill-formed .linefile lines as comments.
1637
1638 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
1639
1640         * config/tc-i386.h (WORKING_DOT_WORD): Define.
1641
1642 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1643
1644         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1645         * as.h (new_logical_line_flags): New.
1646         * input-scrub.c (new_logical_line): Turned into wrapper for...
1647         (new_logical_line_flags): this.  Handle flags.
1648         * read.c (potable): Add linefile.  Adjust appline argument.
1649         (s_app_file): Fake .appfiles no more.
1650         (s_app_line): For .linefile, accept file name and flags.
1651
1652 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1653
1654         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1655
1656 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1657
1658         * Makefile.am: Run "make dep-am".
1659         * Makefile.in: Regenerate.
1660         * po/POTFILES.in: Regenerate.
1661
1662 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
1663
1664         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1665         bug-reporting URL.
1666         * doc/Makefile.am (gasver.texi): Define BUGURL.
1667         * doc/as.texinfo: Use BUGURL.
1668         * Makefile.in, configure, doc/Makefile.in: Regenerate.
1669
1670 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
1671
1672         * config/tc-s390.c (md_parse_option): z9-ec option added.
1673
1674 2007-03-02  Paul Brook  <paul@codesourcery.com>
1675
1676         * config/tc-arm.c (relax_immediate): Always return positive values.
1677         (relaxed_symbol_addr): New function.
1678         (relax_adr, relax_branch): Use it.
1679         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
1680
1681 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
1682
1683         * as.c (parse_args): Update copyright date.
1684
1685 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
1686
1687         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1688
1689 2007-02-28  Nick Clifton  <nickc@redhat.com>
1690
1691         PR gas/3797
1692         * config/tc-d10v.c (do_assemble): Do not generate error messages,
1693         just return -1 whenever a problem is encountered.
1694         (md_assemble): If do_assemble returns -1 generate a non-fatal
1695         error message and return.
1696
1697         PR gas/2623
1698         * config/tc-msp430.c (line_separator_char): Change to '{'.
1699
1700 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1701
1702         * config/tc-m68hc11.c (fixup24): Correct fixup size.
1703         (build_jump_insn): Likewise.
1704         (build_insn): Likewise.
1705         (s_m68hc11_relax): Likewise.
1706
1707 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1708
1709         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1710
1711 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
1712
1713         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1714
1715 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
1716
1717         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1718         (md_assemble): Likewise.
1719
1720 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
1721
1722         * write.c (size_seg): Always clear SEC_RELOC here.
1723         (install_reloc): New function, extracted from..
1724         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
1725         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
1726         testing frag size.  Set SEC_RELOC here.
1727
1728 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
1729
1730         PR 4082
1731         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1732
1733 2007-02-20  Thiemo Seufer  <ths@mips.com>
1734
1735         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1736
1737 2007-02-20  Thiemo Seufer  <ths@mips.com>
1738
1739         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1740
1741 2007-02-20  Thiemo Seufer  <ths@mips.com>
1742             Chao-Ying Fu  <fu@mips.com>
1743
1744         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1745         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1746         (macro_build): Add case '2'.
1747         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1748         (validate_mips_insn): Add support for balign instruction.
1749         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1750         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1751         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1752         command line options.
1753         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1754         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1755         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1756         .set dspr2, .set nodspr2.
1757
1758 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
1759
1760         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1761         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1762
1763 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
1764
1765         * write.c (TC_FX_SIZE_SLACK): Define.
1766         (write_relocs): Reinstate check for fixup within frag.
1767         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1768         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1769         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1770         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1771         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1772
1773 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
1774             Nathan Sidwell  <nathan@codesourcery.com>
1775             Vladimir Prus  <vladimir@codesourcery.com
1776             Joseph Myers  <joseph@codesourcery.com>
1777
1778         * configure.in (--with-bugurl): New option.
1779         * configure: Regenerate.
1780         * dep-in.sed: Remove bin-bugs.h.
1781         * Makefile.am (REPORT_BUGS_TO): Define.
1782         (INCLUDES): Define REPORT_BUGS_TO.
1783         (DEP_INCLUDES): Likewise.
1784         ($(OBJS)): No longer depend on bin-bugs.h.
1785         * Makefile.in: Regenerate.
1786         * doc/Makefile.in: Regenerate.
1787         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1788         * as.h: Remove include of bin-bugs.h.
1789
1790 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
1791
1792         * write.c: White space fixes.
1793         (fixup_segment): Move symbol_mri_common_p adjustments..
1794         (write_relocs): ..and symbol_equated_reloc_p adjustments..
1795         (adjust_reloc_syms): ..to here.
1796
1797 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
1798
1799         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1800         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
1801         (subseg_set_rest): Remove unnecessary cast.
1802         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
1803         Remove unnecessary forward declarations and casts.
1804         (set_symtab): Delete extern bfd_alloc.
1805         (fixup_segment): Move.
1806
1807 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
1808
1809         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1810         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1811         (mcf5475_ctrl, mcf5485_ctrl): New.
1812         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1813         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1814         (init_table): Add asid, mmubar, adjust rombar0.
1815
1816 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
1817
1818         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1819         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1820         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1821         code, and test for these insns using a combination of
1822         opcode_modifier and operand_types.
1823
1824 2007-02-07  Paul Brook  <paul@codesourcery.com>
1825
1826         * configure.tgt: Add arm*-*-uclinux-*eabi.
1827
1828 2007-02-05  Dave Brolley  <brolley@redhat.com>
1829             Richard Sandiford  <rsandifo@redhat.com>
1830             DJ Delorie  <dj@redhat.com>
1831             Stan Cox  <scox@redhat.com>
1832             Jim Blandy  <jimb@redhat.com>
1833             Nick Clifton  <nickc@redhat.com>
1834             Jim Wilson  <wilson@redhat.com>
1835             Frank Ch. Eigler  <fche@redhat.com>
1836             Graydon Hoare  <graydon@redhat.com>
1837             Ben Elliston  <bje@redhat.com>
1838             John Healy  <jhealy@redhat.com>
1839             Richard Henderson  <rth@redhat.com>
1840
1841         * Makefile.am (CPU_TYPES): Add mep.
1842         (TARGET_CPU_CFILES): Add tc-mep.c.
1843         (TARGET_CPU_HFILES): Add tc-mep.h.
1844         (DEPTC_mep_elf): New variable.
1845         (DEPTC_mep_coff): Likewise.
1846         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1847         * configure.in: Support mep.
1848         * configure.tgt: Likewise.
1849         * config/tc-mep.c: New file.
1850         * config/obj-elf.c: New file.
1851         * config/tc-mep.c: New file.
1852         * config/tc-mep.h: New file.
1853         * testsuite/gas/mep: New testsuite with content.
1854         * Makefile.in: Regenerate.
1855         * configure: Regenerate.
1856
1857 2007-02-05  Dave Brolley  <brolley@redhat.com>
1858
1859         * cgen.c (gas_cgen_install_complex_reloc): Removed.
1860         (complex_reloc_installation_howto): Removed.
1861
1862 2007-02-05  Dave Brolley  <brolley@redhat.com>
1863             Graydon Hoare  <graydon@redhat.com>
1864             DJ Delorie  <dj@redhat.com>
1865             Catherine Moore  <clm@redhat.com>
1866             Michael Chastain  <chastain@redhat.com>
1867             Frank Ch. Eigler  <fche@redhat.com>
1868
1869         * symbols.c (use_complex_relocs_for): New, to decide
1870         when to use complex relocs. Add signed RELC support.
1871         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1872         encode expression symbols as mangled complex relocation symbols (when
1873         compiled with -DOBJ_COMPLEX_RELOC).
1874         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1875         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
1876         encode_addend with new args. Modify to get start, length from
1877         ifield whenever it is set. Also change condition on which
1878         self-describing relocs are encoded. Add hook into
1879         gas_cgen_encode_addend.
1880         (queue_fixup_recursively): Add signed RELC support. Change from masked
1881         expr to trunc flag. Restore assignment of sub-field value to
1882         temporary in fixups array. Reflect changed meaning of last arg to
1883         queue_fixup_recursively.
1884         (fixup): Add cgen_maybe_multi_ifield member.
1885         (make_right_shifted_expr): New function.
1886         (queue_fixup): Change to recursive function that fragments
1887         fixups if operand has a multi-ifield.
1888         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1889         symbols, call weak_operand_overflow_check, and fragment call
1890         queue_fixup with operand fields.
1891         (gas_cgen_finish_insn) Modify to manage ifield pointer.
1892         (weak_operand_overflow_check): New function to try to select
1893         insns correctly.
1894         (gas_cgen_encode_addend): New function for relc.
1895         (gas_cgen_install_complex_reloc): Likewise.
1896         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1897         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1898         cgen_maybe_multi_ifield field to fx_cgen substructure.
1899         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1900         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1901
1902 2007-02-03  DJ Delorie  <dj@delorie.com>
1903
1904         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
1905         byte relocs.
1906         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1907         (m32c_cons_fix_new): Prototype.
1908
1909 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1910
1911         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1912         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1913
1914 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1915
1916         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1917         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1918         (map_suffix_reloc_to_operator): New.
1919         (map_operator_to_reloc): New.
1920         (expression_maybe_register): Fix incorrect test of return value from
1921         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
1922         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1923
1924 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1925
1926         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1927         (tinsn_get_tok): Delete prototype.
1928         * config/tc-xtensa.c (tinsn_get_tok): Delete.
1929
1930 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1931
1932         * config/xtensa-relax.h (struct build_instr): Delete id field.
1933         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1934         and LABEL tokens.
1935         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1936         set op_data fields to zero.
1937         (parse_id_constant): Delete.
1938         (build_transition): Remove code to handle numbered literals and labels.
1939
1940 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1941
1942         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1943         (build_transition_table): Likewise.
1944
1945 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
1946
1947         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1948         fx_tcbit.
1949         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1950
1951 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
1952
1953         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1954         (struct fix <fx_plt>): Rename to tcbit2.
1955         * write.c (fix_new_internal): Adjust.
1956         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1957         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1958         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1959         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1960         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1961         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1962         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1963         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1964         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1965         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1966         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1967         Instead, compare fx_r_type.
1968         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1969         fx_tcbit in place of fx_plt.
1970         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1971         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1972         to fx_plt.
1973
1974 2007-01-30  Nick Clifton  <nickc@redhat.com>
1975
1976         * as.c (main): Mark symbols created via the --defsym command line
1977         option as volatile so that they can be overridden later on by a
1978         .set directive.  This maintains compatibility with the behaviour
1979         of earlier versions of the assembler.
1980         * doc/as.texinfo (--defsym): Document that the defined symbol's
1981         value can be overridden via a .set directive.
1982
1983 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
1984
1985         * config/tc-i386.c (swap_imm_operands): Renamed to ...
1986         (swap_2_operands): This.  Take 2 ints.
1987         (md_assemble): Updated.
1988         (swap_operands): Call swap_2_operands to swap 2 operands.
1989
1990 2007-01-24  DJ Delorie  <dj@redhat.com>
1991
1992         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1993
1994 2007-01-22  Nick Clifton  <nickc@redhat.com>
1995
1996         PR gas/3871
1997         * tc-score.c: Remove unnecessary uses of _().
1998         Make the err_msg[] a file level local array in order to save
1999         storage space.
2000         Remove unnecessary sprintf()s.
2001
2002 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
2003
2004         PR gas/3871
2005         * config/tc-score.c : Using _() for const string.
2006         Do not assign inst.error with a local string pointer.
2007         (md_section_align): Pad section.
2008
2009 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
2010
2011         * config/tc-i386.c (build_modrm_byte): Check number of operands
2012         when procssing memory/register operand.
2013
2014 2007-01-12  Nick Clifton  <nickc@redhat.com>
2015
2016         PR gas/3856
2017         * macro.c (expand_irp): Do not ignore spaces inside quoted
2018         strings.
2019
2020 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2021
2022         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2023         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2024         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2025         (TC_FORCE_RELOCATION): Define.
2026         (TC_FORCE_RELOCATION_LOCAL): Define.
2027         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2028
2029 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2030
2031         * input-file.c (input_file_open): Check fgets return.
2032
2033 2007-01-11  Paul Brook  <paul@codesourcery.com>
2034
2035         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2036
2037 2007-01-11  Nick Clifton  <nickc@redhat.com>
2038
2039         PR gas/3707
2040         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2041         variable.
2042
2043         * config/tc-mcore.c (md_number_to_chars): Use
2044         number_to_chars_{big|little}endian.
2045
2046 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
2047
2048         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2049         architecture by itself.
2050         (m68k_ip): Don't issue a warning for tbl instructions on fido.
2051         (m68k_elf_final_processing): Treat Fido as an architecture by
2052         itself.
2053
2054 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
2055
2056         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2057
2058 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
2059
2060         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2061         depending on allow_naked_reg.
2062
2063 2007-01-04  Paul Brook  <paul@codesourcery.com>
2064
2065         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2066
2067 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
2068
2069         PR gas/3830
2070         * config/tc-i386.c (register_prefix): New.
2071         (set_intel_syntax): Set set_intel_syntax to "" if register
2072         prefix isn't needed.
2073         (check_byte_reg): Use register_prefix for error message.
2074         (check_long_reg): Likewise.
2075         (check_qword_reg): Likewise.
2076         (check_word_reg): Likewise.
2077
2078 2007-01-04  Julian Brown  <julian@codesourcery.com>
2079
2080         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2081         (do_neon_qshl_imm): Likewise.
2082         (do_neon_rshl): New function. Handle rounding variants of
2083         v{q}shl-by-register.
2084         (insns): Use do_neon_rshl for vrshl, vqrshl.
2085
2086 2007-01-04  Paul Brook  <paul@codesourcery.com>
2087
2088         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2089         and vacle.
2090
2091 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2092
2093         * config/tc-i386.c (swap_operands): Remove branches.
2094
2095 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2096
2097         * config/tc-i386.c: Update copyright year.
2098         * config/tc-i386.h: Likewise.
2099
2100 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2101
2102         * config/tc-i386.c (smallest_imm_type): Return unsigned int
2103         instead of int.
2104
2105 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2106
2107         * config/tc-i386.c: Convert to ISO C90 formatting
2108         * config/tc-i386.h: Likewise.
2109
2110 2007-01-03  David Daney  <ddaney@avtrex.com>
2111
2112         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
2113         documentation.
2114
2115 For older changes see ChangeLog-2006
2116 \f
2117 Local Variables:
2118 mode: change-log
2119 left-margin: 8
2120 fill-column: 74
2121 version-control: never
2122 End: