1 2008-04-08 Alan Modra <amodra@bigpond.net.au>
3 * dwarf2dbg.c (dwarf2_emit_insn): Simplify test before dwarf2_where
4 call. Delete out of date comment.
5 (dwarf2_consume_line_info): Always clear dwarf2_loc_directive_seen.
6 (dwarf2_emit_label): Don't emit unless there has been a previous
7 .file or we are outputting assembler generated debug.
8 dwarf2_consume_line_info after emitting line info, not before.
9 (out_debug_info): Simplify files_in_use test.
11 2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
13 * config/tc-i386.c (parse_real_register): Return AVX register
14 only if AVX is enabled.
16 2008-04-07 Kaz Kojima <kkojima@rr.iij4u.or.jp>
19 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
20 md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
22 2008-04-04 Adrian Bunk <bunk@stusta.de>
23 Bob Wilson <bob.wilson@acm.org>
25 * config/tc-xtensa.c (xg_apply_fix_value): Check return code from
28 2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
30 * NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
32 * config/tc-i386.c (cpu_arch): Add .pclmul.
33 (md_show_usage): Replace clmul with pclmul.
34 * doc/c-i386.texi: Likewise.
36 2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
38 * NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
40 * doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
41 Document -msse2avx, .avx, .aes, .clmul and .fma.
43 * config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
44 (vex_prefix): Likewise.
46 (CPU_FLAGS_ARCH_MATCH): Likewise.
47 (CPU_FLAGS_64BIT_MATCH): Likewise.
48 (CPU_FLAGS_32BIT_MATCH): Likewise.
49 (CPU_FLAGS_PERFECT_MATCH): Likewise.
52 (fits_in_imm4): Likewise.
53 (build_vex_prefix): Likewise.
54 (VEX_check_operands): Likewise.
55 (bad_implicit_operand): Likewise.
56 (OPTION_MSSE2AVX): Likewise.
57 (T_YMMWORD): Likewise.
58 (_i386_insn): Add vex.
59 (cpu_arch): Add .avx, .aes, .clmul and .fma.
60 (cpu_flags_match): Changed to take a pointer to const template.
61 Enable encoding SSE instructions with VEX prefix for -msse2avx.
62 (match_mem_size): Also check ymmword.
63 (operand_type_match): Clear ymmword.
64 (md_begin): Allow '_' in mnemonic.
65 (type_names): Add OPERAND_TYPE_VEX_IMM4.
66 (process_immext): Update assert.
67 (md_assemble): Don't call process_immext if sse2avx and immext
68 are true. Call build_vex_prefix if vex is true.
69 (parse_insn): Updated for cpu_flags_match.
70 (swap_operands): Handle 5 operands.
71 (match_template): Handle 5 operands. Updated for cpu_flags_match.
72 Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
73 (process_suffix): Handle YMMWORD_MNEM_SUFFIX.
74 (check_byte_reg): Check regymm.
75 (process_operands): Duplicate the destination register for
77 (build_modrm_byte): Updated for instructions with VEX encoding.
78 (output_insn): Output VEX prefix if needed.
79 (md_longopts): Add msse2avx.
80 (md_parse_option): Handle OPTION_MSSE2AVX.
81 (md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
82 (intel_e09): Support YMMWORD.
83 (intel_e11): Likewise.
84 (intel_get_token): Likewise.
86 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
88 * config/tc-avr.c (mcu_types): Add attiny167.
89 * doc/c-avr.texi: Likewise.
91 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
93 * config/tc-avr.c (mcu_types): Add atmega32u4.
94 * doc/c-avr.texi: Likewise.
96 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
98 * config/tc-avr.c (mcu_types): Add atmega32c1.
99 * doc/c-avr.texi: Likewise.
101 2008-03-28 Paul Brook <paul@codesourcery.com>
103 * config/tc-arm.c (parse_neon_mov): Parse register before immediate
104 to avoid spurious symbols.
106 2008-03-28 Nathan Sidwell <nathan@codesourcery.com>
108 * config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with
111 2008-03-27 Eric B. Weddington <eric.weddington@atmel.com>
113 * config/tc-avr.c (mcu_types): Add atmega32m1.
114 * doc/c-avr.texi: Likewise.
116 2008-03-27 Ineiev <ineiev@yahoo.co.uk>
118 * config/tc-arm.c (do_neon_cvt): Move variable declarations to
120 (do_neon_ext): Fix sign of comparison.
122 2008-03-26 Bernd Schmidt <bernd.schmidt@analog.com>
124 From Jie Zhang <jie.zhang@analog.com>
125 * config/bfin-parse.y (asm_1): Check AREGS in comparison
126 instructions. And call yyerror when comparing PREG with
128 (check_macfunc_option): New.
129 (check_macfuncs): Check option by calling check_macfunc_option.
130 Fix comparison always true warnings. Both scalar instructions
131 of vector instruction must share the same mode option. Only allow
132 option mode at the end of the second instruction of the vector.
133 (asm_1): Check option by calling check_macfunc_option.
135 * config/bfin-parse.y (check_macfunc_option): Allow (IU)
136 option for multiply and multiply-accumulate to data register
138 (check_macfuncs): Don't check if accumulator matches the data register
140 (assign_macfunc): Check if accumulator matches the
141 data register in each rule that moves to the data
144 * config/tc-bfin.c (bfin_start_line_hook): Localize the labels
145 generated for LOOP_BEGIN and LOOP_END instructions.
146 (bfin_gen_loop): Likewise.
148 2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
150 * config/tc-s390.c (md_parse_option): z10 option added.
152 2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
154 * aclocal.m4: Regenerate.
155 * configure: Likewise.
156 * Makefile.in: Likewise.
157 * doc/Makefile.in: Likewise.
159 2008-03-17 Adrian Bunk <bunk@stusta.de>
162 * config/tc-hppa.c (is_same_frag): Delete.
164 2008-03-14 Sterling Augustine <sterling@tensilica.com>
166 * config/tc-xtensa.h (xtensa_relax_statesE): Update comment for
167 RELAX_LOOP_END_ADD_NOP.
169 2008-03-13 Evandro Menezes <evandro@yahoo.com>
172 * read.c (s_mexit): Warn if attempting to exit a macro when not
173 inside a macro definition.
175 2008-03-13 Alan Modra <amodra@bigpond.net.au>
177 * Makefile.am: Run "make dep-am".
178 * Makefile.in: Regenerate.
179 * configure: Regenerate.
181 2008-03-09 Paul Brook <paul@codesourcery.com>
183 * config/tc-arm.c (arm_cpu_option_table): Add cortex-a9.
184 * doc/c-arm.texi: Add cortex-a9.
186 2008-03-09 Paul Brook <paul@codesourcery.com>
188 * config/tc-arm.c (fpu_vfp_ext_d32): New vairable.
189 (parse_vfp_reg_list, encode_arm_vfp_reg): Use it.
190 (arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3.
191 (aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16.
192 * doc/c-arm.texi: Document new ARM FPU variants.
194 2008-03-07 Paul Brook <paul@codesourcery.com>
196 * config/tc-arm.c (md_apply_fix): Use correct offset range.
198 2008-03-07 Alan Modra <amodra@bigpond.net.au>
200 * config/tc-ppc.c (ppc_setup_opcodes): Tidy. Add code to test
201 for strict ordering of powerpc_opcodes, but disable for now.
203 2008-03-04 Paul Brook <paul@codesourcery.com>
205 * config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New.
206 (arm_ext_v7m): Rename...
207 (arm_ext_m): ... to this. Include v6-M.
208 (do_t_add_sub): Allow narrow low-reg non flag setting adds.
209 (do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m.
210 (md_assemble): Allow wide msr instructions.
211 (insns): Add classifications for v6-m instructions.
212 (arm_cpu_option_table): Add cortex-m1.
213 (arm_arch_option_table): Add armv6-m.
214 (cpu_arch): Add ARM_ARCH_V6M. Fix numbering of other v6 variants.
216 2008-03-03 Sterling Augustine <sterling@tensilica.com>
217 Bob Wilson <bob.wilson@acm.org>
219 * config/tc-xtensa.c (xtensa_num_pipe_stages): New.
220 (md_begin): Initialize it.
221 (resources_conflict): Use it.
223 2008-03-03 Sterling Augustine <sterling@tensilica.com>
225 * config/tc-xtensa.h (RELAX_XTENSA_NONE): New.
227 2008-03-03 Denys Vlasenko <vda.linux@googlemail.com>
228 H.J. Lu <hongjiu.lu@intel.com>
231 * read.c (pseudo_set): Don't allow global register symbol.
233 * symbols.c (S_SET_EXTERNAL): Don't allow register symbol
236 2008-03-03 H.J. Lu <hongjiu.lu@intel.com>
239 * write.c (write_object_file): Don't allow symbols which were
240 equated to register. Stop if there is an error.
242 2008-03-01 Alan Modra <amodra@bigpond.net.au>
244 * config/tc-ppc.h (struct _ppc_fix_extra): New.
246 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Define.
247 * config/tc-ppc.c (ppu_cpu): Make global.
248 (ppc_insert_operand): Add ppu_cpu parameter.
249 (md_assemble): Adjust for above change.
250 (md_apply_fix): Pass tc_fix_data.ppc_cpu to ppc_insert_operand.
252 2008-02-22 Nick Clifton <nickc@redhat.com>
254 * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF
255 targeted ARM ports, otherwise just skip generating the reloc.
257 2008-02-18 H.J. Lu <hongjiu.lu@intel.com>
259 * doc/c-i386.texi: Update -march= and .arch.
261 2008-02-18 Nick Clifton <nickc@redhat.com>
263 * config/tc-mn10300.c (has_known_symbol_location): New function.
264 Do not regard weak symbols as having a known location.
265 (md_estimate_size_before_relax): Use new function.
266 (md_pcrel_from): Do not compute a pcrel against a weak symbol.
268 2008-02-18 Jan Beulich <jbeulich@novell.com>
270 * config/tc-i386.c (match_template): Disallow 'l' suffix when
271 currently selected CPU has no 32-bit support.
272 (parse_real_register): Do not return registers not available on
273 currently selected CPU.
275 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
277 * config/tc-i386.c (process_immext): Fix format.
279 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
281 * config/tc-i386.c (inoutportreg): New.
282 (process_immext): New.
283 (md_assemble): Use it.
284 (update_imm): Use imm16 and imm32s.
285 (i386_att_operand): Use inoutportreg.
287 2008-02-14 H.J. Lu <hongjiu.lu@intel.com>
289 * config/tc-i386.c (operand_type_all_zero): New.
290 (operand_type_set): Likewise.
291 (operand_type_equal): Likewise.
292 (cpu_flags_all_zero): Likewise.
293 (cpu_flags_set): Likewise.
294 (cpu_flags_equal): Likewise.
295 (UINTS_ALL_ZERO): Removed.
296 (UINTS_SET): Likewise.
297 (UINTS_CLEAR): Likewise.
298 (UINTS_EQUAL): Likewise.
299 (cpu_flags_match): Updated.
300 (smallest_imm_type): Likewise.
301 (set_cpu_arch): Likewise.
302 (md_assemble): Likewise.
303 (optimize_imm): Likewise.
304 (match_template): Likewise.
305 (process_suffix): Likewise.
306 (update_imm): Likewise.
307 (process_drex): Likewise.
308 (process_operands): Likewise.
309 (build_modrm_byte): Likewise.
310 (i386_immediate): Likewise.
311 (i386_displacement): Likewise.
312 (i386_att_operand): Likewise.
313 (parse_real_register): Likewise.
314 (md_parse_option): Likewise.
315 (i386_target_format): Likewise.
317 2008-02-14 Dimitry Andric <dimitry@andric.com>
320 * config/tc-arm.c (s_arm_unwind_save): Advance the input line
321 pointer past the comma after parsing a floating point register
324 2008-02-14 Hakan Ardo <hakan@debian.org>
327 * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
329 (avr_operand): Disallow post-increment addressing in the lpm
330 instruction for the attiny26.
332 2008-02-13 Jan Beulich <jbeulich@novell.com>
334 * config/tc-i386.c (parse_real_register): Don't return 'FLAT'
335 if not in Intel mode.
336 (i386_intel_operand): Ignore segment overrides in immediate and
338 (intel_e11): Range-check i.mem_operands before use as array
339 index. Filter out FLAT for uses other than as segment override.
340 (intel_get_token): Remove broken promotion of "FLAT:" to mean
343 2008-02-13 Jan Beulich <jbeulich@novell.com>
345 * config/tc-i386.c (intel_e09): Also special-case 'bound'.
347 2008-02-13 Jan Beulich <jbeulich@novell.com>
349 * config/tc-i386.c (allow_pseudo_reg): New.
350 (parse_real_register): Check for NULL just once. Allow all
351 register table entries when allow_pseudo_reg is non-zero.
352 Don't allow any registers without type when allow_pseudo_reg
354 (tc_x86_regname_to_dw2regnum): Replace with ...
355 (tc_x86_parse_to_dw2regnum): ... this.
356 (tc_x86_frame_initial_instructions): Adjust for above change.
357 * config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
358 (tc_parse_to_dw2regnum): New.
359 (tc_x86_regname_to_dw2regnum): Replace with ...
360 (tc_x86_parse_to_dw2regnum): ... this.
361 * dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
362 (cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
365 2008-02-12 Nick Clifton <nickc@redhat.com>
367 * config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to
369 (tic4x_insn_add): Likewise.
370 (md_begin): Drop cast that was discarding a const qualifier.
371 * config/tc-d30v.c (get_reloc): Add const qualifier to op
373 (build_insn): Drop cast that was discarding a const qualifier.
375 2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
377 * config/tc-i386.c (cpu_arch): Add .xsave.
378 (md_show_usage): Add .xsave.
380 * doc/c-i386.texi: Add xsave to -march=.
382 2008-02-07 Alan Modra <amodra@bigpond.net.au>
384 * read.c (s_weakref): Don't pass unadorned NULL to concat.
385 * config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise.
387 2008-02-05 Sterling Augustine <sterling@tensilica.com>
389 * config/tc-xtensa.c (relax_frag_immed): Change internal consistency
390 checks into assertions. When relaxation produces an operation that
391 does not fit in the current FLIX instruction, make sure that the
392 operation is relaxed as needed to account for being placed following
393 the current instruction.
395 2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
398 * configure: Regenerated.
400 2008-02-04 Adam Nemet <anemet@caviumnetworks.com>
402 * config/tc-mips.c (mips_cpu_info_table): Add Octeon.
404 2008-01-31 Marc Gauthier <marc@tensilica.com>
406 * configure.tgt (xtensa*-*-*): Recognize processor variants.
408 2008-01-25 Kai Tietz <kai.tietz@onevision.com>
410 * read.c: (emit_expr): Correct for mingw use of printf size
413 2008-01-24 Bob Wilson <bob.wilson@acm.org>
415 * doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that
416 can only be encoded in FLIX instructions but are not specified as such.
417 (Xtensa Automatic Alignment): Remove obsolete comment about debugging
420 2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
422 * NEWS: Mention new command line options for x86 targets.
424 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
426 * config/tc-i386.c (md_show_usage): Replace tabs with spaces.
428 2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
430 * config/tc-avr.c (mcu_types): Change opcode set for at86rf401.
432 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
434 * config/tc-i386.c (md_show_usage): Show more processors for
437 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
439 * config/tc-i386.c (i386_target_format): Remove cpummx2.
441 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
443 * config/tc-i386.c (XXX_PREFIX): Moved from tc-i386.h.
444 (XXX_MNEM_SUFFIX): Likewise.
445 (END_OF_INSN): Likewise.
446 (templates): Likewise.
447 (modrm_byte): Likewise.
448 (rex_byte): Likewise.
449 (DREX_XXX): Likewise.
450 (drex_byte): Likewise.
451 (sib_byte): Likewise.
452 (processor_type): Likewise.
453 (arch_entry): Likewise.
454 (cpu_sub_arch_name): Remove const.
455 (cpu_arch): Add .vmx and .smx.
456 (set_cpu_arch): Append cpu_sub_arch_name.
457 (md_parse_option): Support -march=CPU[,+EXTENSION...].
458 (md_show_usage): Updated.
460 * config/tc-i386.h (XXX_PREFIX): Moved to tc-i386.c.
461 (XXX_MNEM_SUFFIX): Likewise.
462 (END_OF_INSN): Likewise.
463 (templates): Likewise.
464 (modrm_byte): Likewise.
465 (rex_byte): Likewise.
466 (DREX_XXX): Likewise.
467 (drex_byte): Likewise.
468 (sib_byte): Likewise.
469 (processor_type): Likewise.
470 (arch_entry): Likewise.
472 * doc/as.texinfo: Update i386 -march option.
474 * doc/c-i386.texi: Update -march= for ISA.
476 2008-01-18 Bob Wilson <bob.wilson@acm.org>
478 * config/tc-xtensa.c (xtensa_leb128): New function.
479 (md_pseudo_table): Use it for sleb128 and uleb128.
480 (is_leb128_expr): New internal flag.
481 (xtensa_symbol_new_hook): Check new flag.
483 2008-01-16 Eric B. Weddington <eric.weddington@atmel.com>
485 * config/tc-avr.c (mcu_types): Change opcode set for avr3,
486 at90usb82, at90usb162.
487 * doc/c-avr.texi: Change architecture grouping for at90usb82,
489 These changes support the new avr35 architecture group in gcc.
491 2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
493 * config/tc-i386.c (md_assemble): Also zap movzx and movsx
494 suffix for AT&T syntax.
496 2008-01-14 H.J. Lu <hongjiu.lu@intel.com>
498 * config/tc-i386.c (match_reg_size): New.
499 (match_mem_size): Likewise.
500 (operand_size_match): Likewise.
501 (operand_type_match): Also clear all size fields.
502 (match_template): Skip Intel syntax when in AT&T syntax.
503 Call operand_size_match to check operand size.
504 (i386_att_operand): Set the mem field to 1 for memory
506 (i386_intel_operand): Likewise.
508 2008-01-12 H.J. Lu <hongjiu.lu@intel.com>
511 * config/tc-i386.c (_i386_insn): Update comment.
512 (operand_type_match): Also clear unspecified.
513 (operand_type_register_match): Likewise.
514 (parse_operands): Initialize unspecified.
515 (i386_intel_operand): Likewise.
516 (match_template): Check memory and accumulator operand size.
517 (i386_att_operand): Clear unspecified on register operand.
518 (intel_e11): Likewise.
519 (intel_e09): Set operand size and clean unspecified for
522 2008-01-11 Andreas Schwab <schwab@suse.de>
524 * read.c (s_space): Declare `repeat' as offsetT.
526 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
528 * config/tc-i386.c (match_template): Check processor support
531 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
533 * config/tc-i386.c (match_template): Continue if processor
536 2008-01-09 Alexandre Oliva <aoliva@redhat.com>
538 * config/tc-ia64.c (ia64_convert_frag): Zero-initialize room for
539 unwind personality function address.
541 2008-01-09 Bob Wilson <bob.wilson@acm.org>
543 * dwarf2dbg.c (out_sleb128): Delete.
544 (size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
545 (out_fixed_inc_line_addr): Delete.
546 (relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
547 size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
548 (dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
549 (process_entries): Remove calls to out_fixed_inc_line_addr. When
550 DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
551 * read.h (emit_expr_fix): New prototype.
552 * read.c (emit_expr): Move code to emit_expr_fix and use it here.
553 (emit_expr_fix): New.
555 2008-01-09 H.J. Lu <hongjiu.lu@intel.com>
557 * config/tc-i386.c (match_template): Check register size
558 only when size of operands can be encoded the canonical way.
560 2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
562 * config/tc-i386.c (i386_operand): Renamed to ...
563 (i386_att_operand): This.
564 (parse_operands): Updated.
566 2008-01-05 H.J. Lu <hongjiu.lu@intel.com>
568 * doc/c-i386.texi: Update .att_mnemonic and .intel_mnemonic.
570 * config/tc-i386.c (set_intel_mnemonic): Set intel_mnemonic
572 (md_assemble): Remove Intel mode workaround.
573 (match_template): Check support for old gcc, AT&T mnemonic
575 (md_parse_option): Don't set intel_mnemonic to 0 for
578 2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
580 * config/tc-i386.h: Update copyright to 2008.
582 2008-01-04 Nick Clifton <nickc@redhat.com>
584 * config/tc-ppc.c (parse_cpu): Preserve the settings of the
585 PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags.
587 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
589 * config/tc-i386.c (md_assemble): Use !intel_mnemonic instead
592 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
594 * gas/config/tc-i386.c (cpu_arch_flags_not): Removed.
595 (cpu_flags_not): Likewise.
596 (cpu_flags_match): Updated to check 64bit and arch.
597 (set_code_flag): Remove cpu_arch_flags_not.
598 (set_16bit_gcc_code_flag): Likewise.
599 (set_cpu_arch): Likewise.
600 (md_begin): Likewise.
601 (parse_insn): Call cpu_flags_match to check 64bit and arch.
602 (match_template): Likewise.
604 2008-01-03 Jakub Jelinek <jakub@redhat.com>
606 * config/tc-i386.c (process_drex): Initialize modrm_reg and
607 modrm_regmem to 0 instead of None.
609 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
611 * config/tc-i386.c (match_template): Use the xmmword field
614 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
616 * config/tc-i386.c (process_suffix): Fix a typo.
618 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
621 * config/tc-i386.c (match_template): Handle XMMWORD_MNEM_SUFFIX.
622 Check memory size in Intel mode.
623 (process_suffix): Handle XMMWORD_MNEM_SUFFIX.
624 (intel_e09): Likewise.
626 * config/tc-i386.h (XMMWORD_MNEM_SUFFIX): New.
628 2008-01-02 Catherine Moore <clm@codesourcery.com>
630 * config/tc-mips.c (mips_ip): Check operands on jalr instruction.
632 For older changes see ChangeLog-2007
638 version-control: never