1 2014-09-12 Andrew Bennett <andrew.bennett@imgtec.com>
3 * configure.tgt: Add mips*-img-elf* target triple.
5 2014-09-12 Alan Modra <amodra@gmail.com>
7 * config/tc-i386.c (match_template): Remove redundant "!!" testing
9 (build_modrm_byte): Don't compare single-bit bitfields to "1".
11 2014-09-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
13 * config/tc-arm.c (arm_cpus): Add cortex-a17.
15 2014-09-03 Jiong Wang <jiong.wang@arm.com>
17 * config/tc-aarch64.c (parse_sys_reg): Remove the restriction on op0
20 2014-09-03 Jiong Wang <jiong.wang@arm.com>
22 * config/tc-aarch64.c (parse_operands): Recognize PAIRREG.
23 (aarch64_features): Add entry for lse extension.
25 2014-08-26 Jiong Wang <jiong.wang@arm.com>
27 * config/tc-arm.c (aeabi_set_public_attributes): Update selected_cpu
28 based on the info we got during parsing.
29 (arm_handle_align): Make sure the p2align expanding logic under thumb
32 2014-08-26 Maciej W. Rozycki <macro@codesourcery.com>
34 * config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
36 <M_SAAD_AB>: ... here. Assert that !microMIPS.
38 2014-08-26 Jan-Benedict Glaw <jbglaw@lug-owl.de>
40 * config/tc-moxie.h (md_convert_frag): Silence warning.
42 2014-08-22 Richard Henderson <rth@redhat.com>
44 * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
45 register number for vector register types.
46 * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
47 (DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
49 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
51 * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
52 flag if both the processor and opcode flags match.
54 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
56 * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
58 2014-08-20 Maciej W. Rozycki <macro@codesourcery.com>
60 * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
61 (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
62 (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
64 2014-08-20 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
66 * config/tc-arm.c (parse_ifimm_zero): New function.
67 (enum operand_parse_code): Add OP_RSVD_FI0 value.
68 (parse_operands): Handle OP_RSVD_FI0.
69 (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
71 2014-08-20 Alan Modra <amodra@gmail.com>
73 * Makefile.am: Typo fix.
74 * Makefile.in: Regenerate.
75 * po/POTFILES.in: Regenerate.
77 2014-08-19 Andreas Tobler <andreast@fgznet.ch>
79 * Makefile.am: Add FreeBSD ARM support.
80 * Mafefile.in: Regenerate.
81 * configure.tgt: Add FreeBSD ARM support.
82 * config/te-armfbsdeabi.h: New file.
83 * config/te-armfbsdvfp.h: Likewise.
85 2014-08-19 Alan Modra <amodra@gmail.com>
87 * configure: Regenerate.
89 2014-08-18 Nick Clifton <nickc@redhat.com>
91 * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
92 RELOC_RL78_DIFF fixups.
94 2014-08-18 Alan Modra <amodra@gmail.com>
96 * read.c (parse_mri_cons): Warning fix.
98 2014-08-14 Alan Modra <amodra@gmail.com>
100 * configure.ac: Move ACX_LARGEFILE after LT_INIT.
101 * config.in: Regenerate.
102 * configure: Regenerate.
104 2014-08-06 Ilya Tocar <ilya.tocar@intel.com>
106 * config/tc-i386.c (omit_lock_prefix): New.
107 (output_insn): Omit lock prefix if omit_lock_prefix is true.
108 (OPTION_omit_lock_prefix): New.
109 (md_longopts): Add momit-lock-prefix.
110 (md_parse_option): Handle momit-lock-prefix.
111 (md_show_usage): Add momit-lock-prefix=[no|yes].
112 * doc/c-i386.texi (momit-lock-prefix): Document.
114 2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com>
117 * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
120 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
122 * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
123 and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
125 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
127 * config/tc-mips.c (mips_flags_frag): New static global.
128 (struct mips_set_options): Add oddspreg field.
129 (file_mips_opts, mips_opts): Initialize oddspreg.
130 (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
132 (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
133 and -mno-odd-spreg options.
134 (md_begin): Create .MIPS.abiflags section.
135 (fpabi_incompatible_with, fpabi_requires): New static function.
136 (check_fpabi): Likewise.
137 (mips_check_options): Handle fp=xx and oddspreg restrictions.
138 (file_mips_check_options): Set oddspreg by default for fp=xx.
139 (mips_oddfpreg_ok): Re-write function.
140 (check_regno): Check odd numbered registers regardless of FPR size.
141 For fp != 32 use as_bad instead of as_warn.
142 (match_float_constant): Rewrite check regarding FP register width. Add
143 support for generating constants when MXHC1 is present. Handle fp=xx
144 to comply with the ABI.
145 (macro): Update M_LI_DD similarly to match_float_constant. Generate
146 MTHC1 when available. Check that correct code can be generated for
147 fp=xx and fp=64 ABIs.
148 (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
150 (mips_convert_ase_flags): New static function.
151 (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
152 to determine when to add the EF_MIPS_FP64 flag. Populate the
153 .MIPS.abiflags section.
154 (md_mips_end): Update .gnu_attribute based on command line and .module
155 as applicable. Use check_fpabi to ensure .gnu.attribute and command
156 line/.module options are consistent.
157 * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
158 -mfpxx, -modd-spreg and -mno-odd-spreg options.
159 * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
160 gnu_attribute values and FP ABIs.
162 2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com>
164 Add RTEMS target support and simplify matching
166 * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
167 (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
169 2014-07-27 Anthony Green <green@moxielogic.com>
171 * configure.tgt (generic_target): Add moxie-*-moxiebox*
172 * config/tc-moxie.c: Remove moxie_target_format.
173 (md_begin): Set default target_big_endian.
174 * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
175 (TARGET_FORMAT): Set based on target_big_endian.
177 2014-07-26 Alan Modra <amodra@gmail.com>
179 * config/bfin-parse.y: Don't include obstack.h.
180 * config/obj-aout.c: Likewise.
181 * config/obj-coff.c: Likewise.
182 * config/obj-som.c: Likewise.
183 * config/tc-bfin.c: Likewise.
184 * config/tc-i960.c: Likewise.
185 * config/tc-rl78.c: Likewise.
186 * config/tc-rx.c: Likewise.
187 * config/tc-tic4x.c: Likewise.
189 * listing.c: Likewise.
190 * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
191 * config/tc-aarch64.c (symbol_locate): Likewise.
192 * config/tc-arm.c (symbol_locate): Likewise.
193 * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
194 * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
195 (s3_build_dependency_insn_hsh): Likewise.
196 * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
197 (s7_build_dependency_insn_hsh): Likewise.
198 * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
199 (frag_new): Make parameter a size_t.
200 (frag_var_init): Make max_chars and var parameters size_t.
201 (frag_var, frag_variant): Likewise.
202 (frag_room): Return a size_t.
203 (frag_align_pattern): Make n_fill parameter a size_t.
204 * frags.h: Update function prototypes.
205 * symbols.c (save_symbol_name): Make name_length a size_t.
207 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
208 Alexander Ivchenko <alexander.ivchenko@intel.com>
209 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
210 Sergey Lega <sergey.s.lega@intel.com>
211 Anna Tikhonova <anna.tikhonova@intel.com>
212 Ilya Tocar <ilya.tocar@intel.com>
213 Andrey Turetskiy <andrey.turetskiy@intel.com>
214 Ilya Verbin <ilya.verbin@intel.com>
215 Kirill Yukhin <kirill.yukhin@intel.com>
216 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
218 * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
219 * doc/c-i386.texi: Document avx512dq/.avx512dq.
221 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
222 Alexander Ivchenko <alexander.ivchenko@intel.com>
223 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
224 Sergey Lega <sergey.s.lega@intel.com>
225 Anna Tikhonova <anna.tikhonova@intel.com>
226 Ilya Tocar <ilya.tocar@intel.com>
227 Andrey Turetskiy <andrey.turetskiy@intel.com>
228 Ilya Verbin <ilya.verbin@intel.com>
229 Kirill Yukhin <kirill.yukhin@intel.com>
230 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
232 * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
233 * doc/c-i386.texi: Document avx512bw/.avx512bw.
235 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
236 Alexander Ivchenko <alexander.ivchenko@intel.com>
237 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
238 Sergey Lega <sergey.s.lega@intel.com>
239 Anna Tikhonova <anna.tikhonova@intel.com>
240 Ilya Tocar <ilya.tocar@intel.com>
241 Andrey Turetskiy <andrey.turetskiy@intel.com>
242 Ilya Verbin <ilya.verbin@intel.com>
243 Kirill Yukhin <kirill.yukhin@intel.com>
244 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
246 * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
247 (build_vex_prefix): Don't abort on VEX.W.
248 (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
249 (check_VecOperations): Ditto.
250 * doc/c-i386.texi: Document avx512vl/.avx512vl.
252 2014-07-21 Joel Sherrill <joel.sherrill@oarcorp.com>
254 Add or reactivate or1k-*-rtems*
255 * gas/configure.tgt (or1k-*-rtems*): Add.
257 2014-07-17 Ilya Tocar <ilya.tocar@intel.com>
259 * config/tc-i386.c (parse_register): Set need_vrex.
261 2014-07-15 Jiong Wang <jiong.wang@arm.com>
263 * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
264 sign extension. Casting the type of imm1 and imm2 to offsetT. Fix
265 one logic error when checking X_op.
267 2014-07-14 Andreas Schwab <schwab@linux-m68k.org>
269 * config/tc-m68k.c (md_convert_frag_1): Don't complain with
270 --pcrel about TAB (DBCCLBR, LONG) conversion.
272 2014-07-12 David Majnemer <david.majnemer@gmail.com>
274 * read.c (assign_symbol): Don't force "set" symbols local for PE.
276 2014-07-08 Jiong Wang <jiong.wang@arm.com>
278 * config/tc-arm.c (literal_pool): New field "alignment".
279 (find_or_make_literal_pool): Initialize "alignment" to 2.
280 (s_ltorg): Align the pool using value of "alignment"
281 (parse_big_immediate): New parameter "in_exp". Return
282 parsed expression if "in_exp" is not null.
283 (parse_address_main): Invoke "parse_big_immediate" for
285 (add_to_lit_pool): Add one parameter 'nbytes'.
286 Split 8 byte entry into two 4 byte entry.
287 Add padding to align 8 byte entry to 8 byte boundary.
288 (encode_arm_cp_address): Generate literal pool entry if possible.
289 (move_or_literal_pool): Generate entry for vldr case.
290 (enum lit_type): New enum type.
291 (do_ldst): Use new enum type.
292 (do_ldstv4): Likewise.
293 (do_t_ldst): Likewise.
294 (neon_write_immbits): Support Thumb-2 mode.
296 2014-07-07 Barney Stratford <barney_stratford@fastmail.fm>
298 * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
299 name as [xyz][hl]. Permit using a symbol whoes name begins with
300 ‘r’ to refer to a register.
301 Allow arbitrary expressions for the P and p operators.
302 (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
303 BFD_RELOC_AVR_PORT6 relocations.
305 2014-07-04 Alan Modra <amodra@gmail.com>
307 * doc/internals.texi: Update "configure.in" comments.
308 * acinclude.m4: Likewise.
309 * config/tc-sparc.c: Likewise.
311 2014-07-04 Alan Modra <amodra@gmail.com>
313 * configure.ac: Rename from configure.in.
314 * Makefile.in: Regenerate.
315 * config.in: Regenerate.
316 * doc/Makefile.in: Regenerate.
318 2014-07-04 Alan Modra <amodra@gmail.com>
320 * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
321 * doc/Makefile.in: Regenerate.
323 2014-07-04 Alan Modra <amodra@gmail.com>
325 * configure.in: Include bfd/version.m4.
326 (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
327 (BFD_VERSION): Delete.
328 * configure.com: Get bfd version from bfd/version.m4.
329 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
330 * configure: Regenerate.
331 * Makefile.in: Regenerate.
332 * doc/Makefile.in: Regenerate.
334 2014-07-01 Barney Stratford <barney_stratford@fastmail.fm>
335 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
336 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
337 Soundararajan <Sounderarajan.D@atmel.com>
339 * config/tc-avr.c (mcu_types): Add avrtiny arch.
340 Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
342 (md_show_usage): Add avrtiny arch in usage message.
343 (avr_operand): validate and issue error for invalid register for
345 add new reloc exp for 16 bit lds/sts instruction.
346 (md_apply_fix): check 16 bit lds/sts operand for out of range and
348 (md_assemble): check ISA for arch and issue diagnostic.
349 * NEWS: Mention new support.
350 * doc/c-avr.texi: Document support for avrtiny architecture.
352 2014-06-27 Alan Modra <amodra@gmail.com>
354 * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
355 SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
356 (obj_mach_o_frob_label): Avoid cascading errors.
357 (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
359 2014-06-18 DJ Delorie <dj@redhat.com>
361 * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
364 2014-06-17 Hans-Peter Nilsson <hp@bitrange.com>
366 * config/tc-mmix.c (loc_assert_s): New member frag.
368 (mmix_md_end): If an error is reported for a LOC expression, patch
371 2014-06-17 Chris Metcalf <cmetcalf@tilera.com>
374 * macro.c (buffer_and_nest): Honour #line directives inside
377 2014-06-17 Jiong Wang <jiong.wang@arm.com>
379 * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
381 2014-06-17 Hans-Peter Nilsson <hp@axis.com>
383 * config/tc-cris.c (cris_bad): New function.
384 (cris_process_instruction): Where applicable, use it instead of
387 2014-06-16 Nick Clifton <nickc@redhat.com>
389 * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
391 2014-06-16 Jiong Wang <jiong.wang@arm.com>
393 * config/tc-aarch64.c (END_OF_INSN): New macro.
394 (parse_operands): Handle operand given and in wrong format when
397 2014-06-16 Alan Modra <amodra@gmail.com>
399 * write.h (subsegs_finish): Delete declaration.
400 * write.c (subsegs_finish): Make static.
401 (write_object_file): Call subsegs_finish from here. Don't print
402 warning and error count here..
403 * as.c (main): ..do so here instead. Remove dead code for "no
404 object file generated". Split out count strings to better support
405 internationalisation. Don't call subsegs_finish. Tidy setting of
406 "keep_it". Run write_object_file even after errors.
407 (keep_it): Make static.
408 * config/obj-elf.c (elf_frob_symbol): Remove assert.
409 (elf_frob_file_before_adjust): Likewise.
411 2014-06-16 Alan Modra <amodra@gmail.com>
413 * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
416 2014-06-16 Alan Modra <amodra@gmail.com>
418 * config/tc-i386.c (reloc): Don't avoid pcrel check for
419 BFD_RELOC_SIZE64. Return NO_RELOC on failing pcrel check.
421 2014-06-16 Alan Modra <amodra@gmail.com>
423 * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
424 (tic6x_output_exidx_entry): Likewise.
425 (md_apply_fix): Simplify 1 byte md_number_to_chars.
427 2014-06-16 Alan Modra <amodra@gmail.com>
429 * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
430 end of archive to temp file.
431 (tic54x_start_line_hook): Start scan for parallel on next line,
432 not one char into next line (which may overrun the buffer).
434 2014-06-16 Alan Modra <amodra@gmail.com>
436 * config/tc-vax.c (md_apply_fix): Rewrite.
437 (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
438 define rather than the equivalent BFD_RELOC_NONE.
440 2014-06-16 Alan Modra <amodra@gmail.com>
442 * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
443 (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
444 and BFD_RELOC_ARM_TLS* relocs. Simplify BFD_RELOC_8 case.
446 2014-06-16 Alan Modra <amodra@gmail.com>
448 * config/tc-cris.c (md_create_long_jump): Follow "short" jump
449 with a nop rather than leaving uninitialised.
451 2014-06-13 Chen Gang <gang.chen.5i5j@gmail.com>
453 * config/tc-score7.c: Replace sprintf with strcpy where
455 (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
457 * config/tc-score.c (s3_relax_branch_inst16): Likewise.
458 (s3_relax_cmpbranch_inst32): Likewise.
460 2014-06-07 Alan Modra <amodra@gmail.com>
462 * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
463 on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
466 2014-06-02 Martin Storsjo <martin@martin.st>
468 * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
470 2014-06-05 Joel Brobecker <brobecker@adacore.com>
472 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
473 bfd's development.sh.
474 * Makefile.in, configure: Regenerate.
476 2014-06-03 Nick Clifton <nickc@redhat.com>
478 * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
479 (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
480 * doc/c-msp430.texi: Update command line option description.
482 2014-05-22 Alan Modra <amodra@gmail.com>
484 * listing.c (listing_warning, listing_error): Add space after colon.
485 * messages.c (as_warn_internal, as_bad_internal): Use the same
488 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
490 * config/tc-mips.c (file_mips_opts_checked): New static global.
491 (s_module): New static function.
493 (mips_pseudo_table): Add .module handler.
494 (mips_set_ase): Add opts argument and use instead of mips_opts.
495 (md_assemble): Use file_mips_check_options.
496 (md_parse_option): Update to use file_mips_opts instead of mips_opts.
497 (mips_set_architecture): Delete function. Moved to...
498 (mips_after_parse_args): Here. All logic now applies to
499 file_mips_opts first and then copies the final state to mips_opts.
500 Move error checking and defaults inference to mips_check_options and
501 file_mips_check_options.
502 (mips_check_options): New static function. Common option checking for
503 command line, .module and .set. Use .module values in error messages
504 instead of refering to command line options.
505 (file_mips_check_options): New static function. A wrapper for
506 mips_check_options with file_mips_opts. Updates BFD arch based on
508 (s_mipsset): Split into s_mipsset and parse_code_option. Settings
509 supported by both .set and .module are moved to parse_code_option.
510 Warnings and errors are kept in s_mipsset because when
511 parse_code_option is used with s_module the warnings are deferred
512 until code is generated. Any setting supporting 'default' value is
513 kept in s_mipsset as it is not applicable to s_module. Inferred
514 settings are also kept in s_mipsset as s_module does not infer any
515 settings. Use mips_check_options.
516 (parse_code_option): New static function derived from s_mipsset.
517 (s_module): New static function that implements .module. Allows file
518 level settings to be changed until code is generated.
519 (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
520 (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
521 (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
522 (md_mips_end): Use file_mips_check_options.
523 * doc/c-mips.texi: Document .module.
525 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
527 * messages.c (as_warn_internal): Remove extra whitespace from
530 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
532 * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
533 (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
535 2014-05-20 Mike Stump <mikestump@comcast.net>
537 * messages.c (as_warn_internal): Ensure we don't interleave output
538 within a single line when make -j is used.
539 (as_bad_internal): Likewise.
541 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
543 * config/obj-elf.h (obj_elf_seen_attribute): Declare.
544 * config/obj-elf.c (recorded_attribute_info): New structure.
545 (recorded_attributes): New variable.
546 (record_attribute, obj_elf_seen_attribute): New functions.
547 (obj_elf_vendor_attribute): Record which attributes have been seen.
549 2014-05-20 Nick Clifton <nickc@redhat.com>
551 * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
552 Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
553 (msp430_srcoperand): Store vshift value in operand.
555 2014-05-19 Nick Clifton <nickc@redhat.com>
558 * config/tc-i386.c (md_apply_fix): Improve the detection of code
559 symbols for 32-bit PE targets.
561 2014-05-18 Richard Sandiford <rdsandiford@googlemail.com>
563 * config/tc-mips.c (md_obj_begin): Delete.
564 (md_obj_end): Fold into...
565 (md_mips_end): ...here. Move to end of file.
567 2014-05-17 Nick Clifton <nickc@redhat.com>
570 * config/tc-v850.c (handle_ctoff): Generate an error if called
571 when using the RH850 ABI.
573 2014-05-16 Kaushik Phata <Kaushik.Phatak@kpit.com>
575 * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
576 and OPTION_64BIT_DOUBLES.
577 (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
578 (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
579 (md_show_usage): Show all of the RL78 options.
580 (rl78_float_cons): New static functions.
581 (md_pseudo_table): Update handler for "double".
582 * doc/c-rl78.texi: Document new options.
583 * doc/as.texinfo: Likewise.
585 2014-05-13 Matthew Fortune <matthew.fortune@imgtec.com>
587 * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
588 (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
589 (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
590 (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
592 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
594 * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
597 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
599 * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
600 Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
601 (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
602 file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
604 (file_mips_opts): Here. New static global. Update throughout.
605 (mips_opts): Update defaults for gp32 and fp.
607 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
609 * config/tc-mips.c (streq): Define.
610 (mips_convert_symbolic_attribute): New function.
611 * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
612 (mips_convert_symbolic_attribute): New prototype.
614 2014-05-02 Max Filippov <jcmvbkbc@gmail.com>
616 * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
619 2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com>
621 * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
623 (ISA_HAS_64BIT_FPRS): Likewise.
624 (ISA_HAS_ROR): Likewise.
625 (ISA_HAS_ODD_SINGLE_FPR): Likewise.
626 (ISA_HAS_MXHC1): Likewise.
627 (hilo_interlocks): Likewise.
628 (md_longopts): Likewise.
629 (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
630 (ISA_HAS_DROR): Likewise.
631 (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
633 (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
635 (md_parse_option): Likewise.
636 (s_mipsset): Likewise.
637 (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
638 and mips64r5. Also change p5600 entry to be mips32r5.
639 * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
641 * configure: Regenerate.
642 * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
643 -mips64r5 command line options.
644 * doc/as.texinfo: Likewise.
646 2014-04-28 Nick Clifton <nickc@redhat.com>
649 * config/tc-i386.c (md_apply_fix): Do not adjust value of
650 pc-relative fixes against weak symbols.
652 2014-04-26 Alan Modra <amodra@gmail.com>
654 * po/POTFILES.in: Regenerate.
656 2014-04-24 Nick Clifton <nickc@redhat.com>
658 * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
661 2014-04-23 Will Newton <will.newton@linaro.org>
663 * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
664 directly instead of mapping_state.
666 2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com>
668 * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
669 (md_longopts): Add xpa and no-xpa command line options.
670 (mips_ases): Add MIPS XPA ASE.
671 (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
672 * doc/as.texinfo: Document the MIPS XPA command line options.
673 * doc/c-mips.texi: Document the MIPS XPA command line options,
674 and assembler directives.
676 2014-04-22 Sandra Loosemore <sandra@codesourcery.com>
678 * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
679 unbreak self-test mode.
681 2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
683 * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
686 2014-04-22 Christian Svensson <blue@cmd.nu>
688 * Makefile.am: Remove openrisc and or32 support. Add support for or1k.
689 * configure.in: Likewise.
690 * configure.tgt: Likewise.
691 * doc/as.texinfo: Likewise.
692 * config/obj-coff.h: Likewise.
693 * config/tc-or1k.c: New file.
694 * config/tc-or1k.h: New file.
695 * config/tc-openrisc.c: Delete.
696 * config/tc-openrisc.h: Delete.
697 * config/tc-or32.c: Delete.
698 * config/tc-or32.h: Delete.
699 * Makefile.in: Regenerate.
700 * configure: Regenerate.
702 2014-04-16 Alan Modra <amodra@gmail.com>
704 * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
705 * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
707 2014-04-10 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
709 * config/tc-avr.c: Add new flag mlink-relax.
710 (md_show_usage): Add flag and help text.
711 (md_parse_option): Record whether link relax is turned on.
712 (relaxable_section): New.
713 (avr_validate_fix_sub): New.
714 (avr_force_relocation): New.
715 (md_apply_fix): Generate DIFF reloc.
716 (avr_allow_local_subtract): New.
718 * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
719 (TC_FORCE_RELOCATION): Define.
720 (TC_FORCE_RELOCATION_SUB_SAME): Define.
721 (TC_VALIDATE_FIX_SUB): Define.
722 (avr_force_relocation): Declare.
723 (avr_validate_fix_sub): Declare.
724 (md_allow_local_subtract): Define.
725 (avr_allow_local_subtract): Declare.
727 2014-04-10 Andrew Bennett <andrew.bennett@imgtec.com>
729 * config/tc-mips.c (mips_cpu_info_table): Add P5600
731 * doc/c-mips.texi: Document p5600.
733 2014-04-09 Nick Clifton <nickc@redhat.com>
735 * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
736 * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
737 * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
738 * read.c (emit_expr_fix): Mark the r parameter as potentially
741 2014-04-09 Alan Modra <amodra@gmail.com>
743 * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
745 (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
746 (ppc_elf_cons_fix_check): New function.
747 (md_assemble): Set last_insn, last_seg, last_subseg.
748 (ppc_byte, md_apply_fix): Handle warn_476.
749 * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
750 (ppc_elf_cons_fix_check): Declare.
751 * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
753 2014-04-09 Alan Modra <amodra@gmail.com>
755 * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
756 * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
757 * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
758 (TC_CONS_FIX_NEW): Add RELOC parameter.
759 * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
760 * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
761 * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
762 * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
763 * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
764 * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
765 * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
766 * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
767 * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
769 * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
770 * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
771 * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
772 * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
773 * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
774 * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
775 * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
776 * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
777 * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
778 * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
780 * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
781 * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
783 * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
784 * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
785 * gas/config/tc-avr.c (exp_mod_data): Make global.
786 (pexp_mod_data): Delete.
787 (avr_parse_cons_expression): Return exp_mod_data pointer.
788 (avr_cons_fix_new): Add exp_mod_data_t pointer param.
789 (exp_mod_data_t): Move typedef..
790 * gas/config/tc-avr.h: ..to here.
791 (exp_mod_data): Declare.
792 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
793 (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
794 (TC_CONS_FIX_NEW): Update.
795 * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
796 (cons_fix_new_hppa): Add hppa_field_selector param.
797 (fix_new_hppa): Adjust.
798 (parse_cons_expression_hppa): Return field selector.
799 * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
800 (cons_fix_new_hppa): Likewise.
801 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
802 * gas/config/tc-i386.c (got_reloc): Delete static var.
803 (x86_cons_fix_new): Add reloc param.
804 (x86_cons): Return got reloc.
805 * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
806 (TC_CONS_FIX_NEW): Add RELOC param.
807 * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param. Adjust
809 * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
810 (TC_CONS_FIX_NEW): Add reloc param.
811 * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
813 (cons_fix_new_microblaze): Add reloc param.
814 * gas/config/tc-microblaze.h: Formatting.
815 (parse_cons_expression_microblaze): Update proto.
816 (cons_fix_new_microblaze): Likewise.
817 * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
818 (nios2_cons): Return ldo reloc.
819 (nios2_cons_fix_new): Delete.
820 * gas/config/tc-nios2.h (nios2_cons): Update prototype.
821 (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
822 * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
823 short. Make llong use cons.
824 (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
825 (ppc_elf_cons): Delete.
826 (ppc_elf_parse_cons): New function.
827 (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
828 (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
829 * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
830 (ppc_elf_parse_cons): Declare.
831 * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
832 (sparc_cons): Return reloc specifier.
833 (cons_fix_new_sparc): Add reloc specifier param.
834 (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
835 * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
836 (TC_PARSE_CONS_RETURN_NONE): Define.
837 (sparc_cons, cons_fix_new_sparc): Update prototype.
838 * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
839 (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
840 (md_assemble): Likewise.
841 (parse_cons_expression_v850): Return reloc.
842 (cons_fix_new_v850): Add reloc parameter.
843 * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
844 (cons_fix_new_v850): Likewise.
845 * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
846 (vax_cons): Return reloc.
847 (vax_cons_fix_new): Add reloc parameter.
848 * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
849 * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
850 * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
851 * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
852 (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
853 * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
854 (do_parse_cons_expression): Adjust.
855 (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
856 to emit_expr_with_reloc.
857 (emit_expr_with_reloc): New function handling reloc, mostly
860 (emit_expr_fix): Add reloc param. Adjust TC_CONS_FIX_NEW invocation.
862 (parse_mri_cons): Convert to ISO.
863 * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
864 (TC_PARSE_CONS_RETURN_NONE): Define.
865 (emit_expr_with_reloc): Declare.
866 (emit_expr_fix): Update prototype.
867 * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
869 2014-04-03 Ilya Tocar <ilya.tocar@intel.com>
871 * config/tc-i386.c (cpu_arch): Add .se1.
872 * doc/c-i386.texi: Document .se1/se1.
874 2014-04-02 DJ Delorie <dj@redhat.com>
876 * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
877 pc-relative branches.
879 2014-04-02 Nick Clifton <nickc@redhat.com>
882 * config/tc-arm.c (create_unwind_entry): Report an error if an
883 attempt to recreate an unwind directive is encountered.
885 2014-03-27 Nick Clifton <nickc@redhat.com>
887 * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
888 sprintf in order to avoid a compile time warning.
890 2014-03-26 Nick Clifton <nickc@redhat.com>
892 * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
893 relocation is used on an 8-bit operand or vice versa.
894 (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
895 (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
897 2014-03-25 Nick Clifton <nickc@redhat.com>
899 * config/obj-coff-seh.c (obj_coff_seh_code): New function -
900 switches the current segment back to the code segment recorded
901 when seh_proc was last invoked.
902 * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
904 2014-03-25 Alan Modra <amodra@gmail.com>
906 * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
907 (md_assemble): Likewise. Warn.
909 2014-03-21 David Weatherford <weath@cadence.com>
910 Max Filippov <jcmvbkbc@gmail.com>
912 * config/tc-xtensa.c (xtensa_check_frag_count)
913 xtensa_create_trampoline_frag,
914 xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
915 find_trampoline_seg, search_trampolines, get_best_trampoline,
916 check_and_update_trampolines, add_jump_to_trampoline,
917 dump_trampolines): New functions.
918 (md_parse_option): Add cases for --[no-]trampolines options.
919 (md_assemble, finish_vinsn, xtensa_end): Add call to
920 xtensa_check_frag_count.
921 (xg_assemble_vliw_tokens): Add call to
922 xtensa_maybe_create_trampoline_frag.
923 (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
924 (relax_frag_immed): Relax jump instructions that cannot reach its
926 * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
928 * doc/as.texinfo: Document --[no-]trampolines command-line options.
929 * doc/c-xtensa.texi: Document trampolines relaxation and command
931 * frags.c (get_frag_count, clear_frag_count): New function.
932 (frag_alloc): Increment totalfrags counter.
933 * frags.h (get_frag_count, clear_frag_count): New function.
935 2014-03-20 DJ Delorie <dj@redhat.com>
937 * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
938 * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
940 * config/tc-rl78.h (md_relax_frag): Define.
941 (rl78_relax_frag): Declare.
942 * config/tc-rl78.c (rl78_relax): Add.
943 (md_assemble): Set up the variable frags also when relaxing.
945 (rl78_opcode_type): New.
946 (rl78_frag_fix_value): New.
947 (md_estimate_size_before_relax): New-ish.
948 (rl78_relax_frag): New.
949 (md_convert_frag): New-ish.
951 2014-03-20 Richard Sandiford <rdsandiford@googlemail.com>
953 * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
954 * config/tc-mips.c (md_pcrel_from): Remove error message.
955 (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
956 BFD_RELOC_32_PCREL. Report a specific error message for unhandled
957 PC-relative expressions. Handle BFD_RELOC_8.
959 2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com>
961 * config/tc-sparc.c (hpriv_reg_table): Added entries for
962 %hstick_offset and %hstick_enable.
963 * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
964 %hstick_enable hyperprivileged registers.
966 2014-03-19 Daniel Gutson <daniel.gutson@tallertechnologies.com>
967 Nick Clifton <nickc@redhat.com>
969 * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
970 CCS syntax compatibility mode is on or off.
971 (asmfunc_states): New enum to represent the asmfunc directive state.
972 (asmfunc_state): New variable holding the asmfunc directive state.
973 (comment_chars): Rename to arm_comment_chars.
974 (line_separator_chars): Rename to arm_line_separator_chars.
975 (s_ccs_ref): New function that handles the .ref directive.
976 (asmfunc_debug): New function.
977 (s_ccs_asmfunc): New function that handles the .asmfunc directive.
978 (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
979 (s_ccs_def): New function that handles the .def directive.
980 (tc_start_label_without_colon): New function.
981 (md_pseudo_table): Added new CCS directives.
982 (arm_ccs_mode): New function that handles the -mccs command line option.
983 (arm_long_opts): Added new -mccs command line option.
984 * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
985 (TC_START_LABEL_WITHOUT_COLON): New macro.
986 (tc_start_label_without_colon): Added extern function declaration.
987 (tc_comment_chars): Define.
988 (tc_line_separator_chars): Define.
989 * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
990 * read.c (read_begin): Likewise.
991 * doc/as.texinfo: Add documentation for the -mccs command line
993 * doc/c-arm.texi: Likewise.
994 * doc/internals.texi: Document tc_line_separator_chars.
995 * NEWS: Mention the new feature.
997 2014-03-18 Jiong Wang <jiong.wang@arm.com>
999 * config/tc-aarch64.c (aarch64_opts): Add new option
1000 "mno-verbose-error".
1001 (verbose_error_p): Initialize to 1.
1002 * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
1003 and -mno-verbose-error.
1005 2014-03-17 Nick Clifton <nickc@redhat.com>
1008 * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
1011 2014-03-13 Richard Earnshaw <rearnsha@arm.com>
1012 Jiong Wang <Jiong.Wang@arm.com>
1014 * doc/c-aarch64.texi: Clean up some formatting issues.
1015 (AArch64 Options): Document -mcpu and -march.
1016 (AArch64 Extensions): New node.
1018 2014-03-13 Tristan Gingold <gingold@adacore.com>
1020 * config/tc-i386.c (use_big_obj): Declare.
1021 (OPTION_MBIG_OBJ): Define.
1022 (md_longopts): Add -mbig-obj option.
1023 (md_parse_option): Handle it.
1024 (md_show_usage): Display help for this option.
1025 (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
1026 * doc/c-i386.texi: Document the option.
1028 2014-03-12 Nick Clifton <nickc@redhat.com>
1031 * config/tc-aarch64.c (literal_expression): New structure.
1032 (literal_pool): Replace exp array with literal_expression array.
1033 (add_to_lit_pool): When adding a bignum cache the big value.
1034 (s_ltorg): When emitting a bignum initialise the global bignum
1035 array from the cached value.
1037 2014-03-12 Alan Modra <amodra@gmail.com>
1039 * Makefile.in: Regenerate.
1040 * config.in: Regenerate.
1041 * doc/Makefile.in: Regenerate.
1043 2014-03-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
1044 Vishnu KS <Vishnu.k_s@atmel.com>
1045 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1046 Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
1048 * gas/tc-avr.c: Add new devices
1049 avr25: ata5272, attiny828
1050 avr35: ata5505, attiny1634
1051 avr4: atmega8a, ata6285, ata6286, atmega48pa
1052 avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
1053 atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
1055 avr51: atmega128a, atmega1284
1056 avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1057 atxmega32e5, atxmega16e5, atxmega8e5
1058 avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1059 atxmega64c3, atxmega64d4
1060 avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1061 atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1062 atxmega256c3, atxmega384c3, atxmega384d3
1063 avrxmega7: atxmega128a4u
1064 * doc/c-avr.texi: Ditto.
1066 2014-03-05 Alan Modra <amodra@gmail.com>
1068 Update copyright years.
1070 2014-03-05 Alan Modra <amodra@gmail.com>
1072 * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1073 (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1075 2014-03-05 Alan Modra <amodra@gmail.com>
1077 * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1078 later. Merge absolute and relative branch reloc selection.
1079 Generate 16-bit relocs for most 16-bit insn fields given a
1080 non-constant expression.
1082 2014-03-05 Alan Modra <amodra@gmail.com>
1084 * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1085 (md_assemble): Don't call ppc_is_toc_sym for ELF.
1087 2014-03-04 Heiher <r@hev.cc>
1089 * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1092 2014-03-03 Nick Clifton <nickc@redhat.com>
1094 * config/msp430/msp430.c: Replace known mcu array with known
1095 msp430 ISA mcu name array.
1096 Accept any name for -mmcu option.
1097 Add -mz option to warn about missing NOP following an interrupt
1099 (check_for_nop): New.
1100 (msp430_operands): Emit a warning, if requested, when an interrupt
1101 changing instruction is not followed by a NOP.
1102 * doc/c-msp430.c: Document -mz option.
1104 2014-03-03 Alan Modra <amodra@gmail.com>
1106 * config/bfin-lex-wrapper.c: Correct copyright date.
1107 * config/obj-fdpicelf.c: Likewise.
1108 * config/obj-fdpicelf.h: Likewise.
1109 * config/tc-frv.c: Correct copyright punctuation.
1110 * config/tc-ip2k.c: Likewise.
1111 * config/tc-iq2000.c: Likewise.
1112 * config/tc-mep.c: Likewise.
1113 * config/tc-tic4x.c: Likewise.
1114 * config/tc-tic4x.h: Likewise.
1116 2014-03-01 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1118 * config/tc-avr.c: Remove atxmega16x1.
1120 2014-02-28 Alan Modra <amodra@gmail.com>
1122 * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1123 field for 64-bit dwarf.
1125 2014-02-21 Ilya Tocar <ilya.tocar@intel.com>
1127 * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1128 * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1130 2014-02-12 Ilya Tocar <ilya.tocar@intel.com>
1132 * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1133 * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1134 clflushopt/.clfushopt.
1136 2014-02-10 Alan Modra <amodra@gmail.com>
1138 * po/POTFILES.in: Regenerate.
1139 * po/gas.pot: Regenerate.
1141 2014-02-03 Sandra Loosemore <sandra@codesourcery.com>
1143 * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1144 (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1145 %got_hiadj relocation operators. Sort table and add comment
1146 to explain ordering.
1147 (nios2_fix_adjustable): Test for new relocs.
1148 * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1151 2014-01-30 Sandra Loosemore <sandra@codesourcery.com>
1153 * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1154 (nios2_assemble_args_m): Likewise.
1155 (md_assemble): Likewise.
1157 2014-01-24 DJ Delorie <dj@redhat.com>
1159 * config/tc-msp430.c (msp430_section): Always flag data sections,
1161 (msp430_frob_section): New. Make sure all sections are noticed if
1163 (msp430_lcomm): New. Flag bss if .lcomm is seen.
1164 (msp430_comm): New. Likewise.
1165 (md_pseudo_table): Add them.
1166 * config/tc-msp430.h (msp430_frob_section): Declare.
1167 (tc_frob_section): Define.
1169 2014-01-23 Nick Clifton <nickc@redhat.com>
1171 * config/tc-msp430.c (show_mcu_list): Delete.
1172 (md_parse_option): Accept any MCU name. Accept several more
1173 variants for the -mcpu option.
1174 (md_show_usage): Do not call show_mcu_list.
1176 2014-01-22 DJ Delorie <dj@redhat.com>
1178 * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1179 * doc/c-msp430.texi (MSP430 Directives): Document it.
1181 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1183 * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1186 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1189 * config/tc-i386.c (check_VecOperands): Add check for invalid
1190 register set in AVX512 gathers.
1192 2014-01-22 Alan Modra <amodra@gmail.com>
1194 * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1196 2014-01-21 DJ Delorie <dj@redhat.com>
1198 * config/tc-rl78.c (require_end_of_expr): New.
1199 (md_operand): Call it.
1200 (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1203 2014-01-17 Will Newton <will.newton@linaro.org>
1205 * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1206 for the s32.f64 flavours of VCVT.
1208 2014-01-14 Nick Clifton <nickc@redhat.com>
1211 * config/tc-z80.c (wrong_match): Provide format string to
1213 (parse_exp_not_indexed): Delete unused variable dummy.
1214 (emit_byte): Delete unused variable fixp.
1216 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1218 * config/tc-i386.c (regbnd): Removed.
1219 (vec_disp8): Likewise.
1221 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1223 * as.c (parse_args): Update copyright year to 2014.
1225 2014-01-07 Tom Tromey <tromey@redhat.com>
1227 * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1230 2014-01-07 Tom Tromey <tromey@redhat.com>
1232 * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1235 2014-01-07 Tom Tromey <tromey@redhat.com>
1237 * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1239 2013-01-07 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
1241 * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1243 For older changes see ChangeLog-2013
1245 Copyright (C) 2014 Free Software Foundation, Inc.
1247 Copying and distribution of this file, with or without modification,
1248 are permitted in any medium without royalty provided the copyright
1249 notice and this notice are preserved.
1255 version-control: never