1 Thu Jul 22 12:09:41 1993 Ian Lance Taylor (ian@cygnus.com)
3 * read.c (read_a_source_file): In NO_PSEUDO_DOT case, if we find a
4 pseudo-op with a poc_handler field of NULL, ignore it and treat it
5 as an instruction instead.
6 * config/tc-m88k.c (md_pseudo_table): Add "set" with a NULL
9 * config/tc-h8500.c (md_begin): Use a local variable when
10 initializing md_relax_table to avoid warnings about modifying a
11 supposedly const data structure.
13 Thu Jul 22 10:58:51 1993 Brendan Kehoe (brendan@lisa.cygnus.com)
15 * config/obj-aout.c: Only include aout/aout64.h if BFD_ASSEMBLER
18 Wed Jul 21 17:32:02 1993 Fred Fish (fnf@deneb.cygnus.com)
20 * configure.in (case ${host}): Map *-*-sysv4* to gas_host=sysv.
21 * configure.in (case ${generic_target}): Add i[34]86-*-sysv4*
22 case to set obj_format=elf. Must go before i386-*-sysv* case that
23 sets obj_format=coffbsd. Add *-*-sysv4* to *-*-elf and
24 *-*-solaris case, and move to before *-sysv* case that wants to
25 set obj_format to coff.
26 * config/tc-i386.c (i386_operand): Change all 'exp.X_op' to
28 * config/tc-i386.c (md_apply_fix): Fix valp to be 'valueT *' for
31 Wed Jul 21 12:47:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
33 * config/obj-aout.c: Include aout/aout64.h.
34 (obj_aout_frob_symbol): Set BSF_DEBUGGING for a constructor
35 symbol, so that BFD doesn't tamper with the type.
37 * read.c (read_a_source_file): If NO_PSEUDO_DOT is defined, look
38 up opcodes as pseudo-ops even if they don't start with '.'.
39 * config/tc-m88k.h (NO_PSEUDO_DOT): Define.
40 * config/tc-m88k.c (md_assemble): Removed special pseudo-op
42 (md_apply_fix): Set fx_offset to the upper 16 bits of the reloc.
43 Output the low 16 bits for RELOC_HI16, not the high 16 bits.
44 * config/obj-coffbfd.c (do_relocs_for): If TC_M88K, set the
45 r_offset field of the reloc to the fixup offset.
46 (fixup_segments): If TC_M88K, don't warn about fixup overflows.
47 * doc/as.texinfo: Minor updates.
49 Tue Jul 20 19:28:56 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
51 * Extensive changes to permit symbols to contain any expression
52 type and to delay the computation of the expression until the
53 value is actually needed. This permits setting symbols to values
54 calculated based on object code size. Expressions were changed to
55 no longer be in a section, to stop the overloading of segment and
56 expression type that previously occurred.
58 * as.c (big_section, pass1_section, diff_section, absent_section):
60 (expr_section): Added (used for dummy symbols which hold
61 intermediate expression values).
62 (perform_an_assembly_pass): Create expr_section, do not create the
64 * as.h (segT): Removed SEG_ABSENT, SEG_PASS1, SEG_BIG, and
65 SEG_DIFFERENCE. Added SEG_EXPR.
66 (SEG_NORMAL): Corresponding changes.
67 * subsegs.c (seg_name, subsegs_begin): Changed accordingly.
68 * write.c (write_object_file): Ditto.
69 * config/obj-aout.c (seg_N_TYPE): Ditto.
70 * config/obj-bout.c (seg_N_TYPE): Ditto.
71 * config/obj-coff.c (seg_N_TYPE): Ditto.
72 * config/obj-coffbfd.c (seg_N_TYPE): Ditto.
73 * config/obj-vms.c (seg_N_TYPE): Ditto.
75 * expr.h (operatorT): Moved in from expr.c, added some values.
76 (expressionS): Added X_op field, removed X_seg field; renamed
77 X_subtract_symbol to X_op_symbol.
78 * expr.c: Extensive changes to assign expression types rather than
79 sections and to simplify the parsing.
80 * write.c (fix_new_internal): New static function.
81 (fix_new): Removed sub_symbol argument.
82 (fix_new_exp): New function, takes expression argument.
83 * write.h: Prototype changes for fix_new and fix_new_exp.
84 * cond.c (s_if): Changed accordingly.
85 * read.c (s_lsym, pseudo_set, emit_expr, parse_bitfield_cons,
86 parse_repeat_cons, get_segmented_expression,
87 get_known_segmented_expression, get_absolute_expression): Ditto.
88 * symbols.c (resolve_symbol_value, S_GET_VALUE, S_SET_VALUE):
90 * write.c (write_object_file): Ditto.
91 * config/obj-coff.c (obj_coff_def, obj_coff_val): Ditto.
92 * config/obj-coffbfd.c (obj_coff_def, obj_coff_val,
93 obj_coff_endef, yank_symbols): Ditto.
94 * config/obj-elf.c (obj_elf_stab_generic, obj_elf_size): Ditto.
95 * config/tc-a29k.c (md_assemble, parse_operand, machine_ip,
96 print_insn, md_operand): Ditto.
97 * config/tc-h8300.c (parse_exp, colonmod24, check_operand,
98 do_a_fix_imm, build_bytes): Ditto.
99 * config/tc-h8500.c (parse_exp, skip_colonthing, parse_reglist,
100 get_specific, check, insert, md_convert_frag): Ditto.
101 * config/tc-hppa.c (the_insn, fix_new_hppa, cons_fix_new_hppa,
102 md_assemble, pa_ip, getExpression, getAbsoluteExpression,
103 evaluateAbsolute, pa_build_unwind_subspace, pa_entry,
104 process_exit): Ditto.
105 * config/tc-hppa.h (STAB_FIXUP, is_DP_relative, is_PC_relative,
107 * config/tc-i386.c (pe, md_assemble, i386_operand,
108 md_estimate_size_before_relax, md_create_long_jump): Ditto.
109 * config/tc-i860.c (md_assemble, getExpression, print_insn):
111 * config/tc-i960.c (parse_expr, subs, segs, md_convert_frag,
112 get_cdisp, mem_fmt, parse_ldconst, relax_cobr, s_sysproc,
113 i960_handle_align): Ditto.
114 * config/tc-m68k.c (struct m68k_exp, struct m68k_it, seg, op,
115 subs, add_fix, isvar, m68k_ip, md_assemble, md_convert_frag_1,
116 md_estimate_size_before_relax, md_create_long_jump, get_num):
118 * config/tc-m88k.c (md_assemble, get_imm16, get_pcr,
119 md_create_short_jump, md_create_long_jump): Ditto.
120 * config/tc-mips.c (md_assemble, append_insn, gp_reference,
121 macro_build, macro, my_getExpression): Ditto. Also removed
122 get_optional_absolute_expression; just use get_absolute_expression
124 * config/tc-ns32k.c (get_addr_mode, evaluate_expr, convert_iif,
125 fix_new_ns32k, fix_new_ns32k_exp, cons_fix_new_ns32k): Ditto.
126 * config/tc-ns32k.h (fix_new_ns32k prototype): Ditto.
127 * config/tc-sh.c (parse_exp, check, insert, md_convert_frag):
129 * config/tc-sparc.c (md_assemble, sparc_ip, getExpression,
131 * config/tc-tahoe.c (struct top, md_estimate_size_before_relax,
132 tip_op, md_assemble): Ditto.
133 * config/tc-vax.c (seg_of_operand, md_assemble,
134 md_estimate_size_before_relax, md_create_long_jump): Ditto.
135 * config/tc-z8k.c (parse_exp, check_operand, newfix): Ditto.
137 Tue Jul 20 12:17:16 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
139 * configure.in: i386-lynx is the same as i386-coff
141 Mon Jul 19 15:21:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
143 * config/obj-elf.c (obj_elf_previous): New function.
144 (previous_section, previous_subsection): New vars.
145 (obj_elf_section): Save current place in case DWARF code wants us
146 to pop back to it. Handle unquoted section name as well as quoted
147 section name. Don't crash on invalid strings.
148 (obj_pseudo_table): Handle new pseudos "previous", "2byte", and
151 * config/obj-elf.h: Don't include struc-symbol.h.
152 (obj_elf_frob_symbol): Declare arg as struct symbol *.
154 * tc-sparc.h (LOCAL_LABEL) [OBJ_ELF]: Local labels can start with
157 * write.c (write_relocs): New function, split off from
158 write_contents. Use memset instead of bzero.
159 (write_object_file): Apply write_relocs to each section before
160 applying write_contents.
162 * read.c (read_begin): Call obstack_begin with values closer to 1K
164 (read_a_source_file, big_cons, float_cons): Use memcpy instead of
167 Mon Jul 19 14:30:00 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
169 * config/tc-m68k.c (m68k_ip_op): Don't decrement strend when
170 calculating opP->isiz; this permits the expression size to be
171 determined as well, later on.
173 * expr.c (clean_up_expression): Don't cancel the subtraction of
176 * read.c (s_data), config/obj-coffbfd.c (obj_coff_data): If -R,
177 switch to text section rather than data section.
179 Mon Jul 19 12:35:39 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
181 * config/tc-m68k.c (m68k_ip, case AINDX): Add 6 to operand
182 expression (to take the pc-rel instruction itself into account)
183 before using the expression, instead of after.
185 Fri Jul 16 08:56:04 1993 Ian Lance Taylor (ian@cygnus.com)
187 * read.c (float_cons): Simplified parsing logic. If
188 REPEAT_CONS_EXPRESSIONS is defined, accept a repeat count.
190 * symbols.c (colon): Rather than a special case for TC_HPPA,
191 use new macro tc_frob_label.
192 * config/tc-hppa.h (tc_frob_label): Define.
194 * config/tc-mips.c: Many changes to support simple assembler
196 (insn_label, prev_insn, prev_prev_insn, dummy_opcode,
197 prev_insn_valid, prev_insn_frag, prev_insn_where,
198 prev_insn_fixp, prev_insn_is_delay_slot): New static
200 (insn_uses_reg, mips_no_prev_insn, mips_emit_delays,
201 mips_align, s_stringer, s_mips_space): New static functions.
202 (mips_define_label): New global function.
203 (md_pseudo_table): For "ascii", "asciz", "asciiz", call
204 s_stringer. Changed argument to float_cons from 0 or 1 to 'f'
205 or 'd'. For "space" call s_mips_space.
206 (md_begin): Call mips_no_prev_insn.
207 (append_insn): Only insert necessary NOP instructions.
208 (macro): Call mips_emit_delays before setting mips_noreorder.
209 Increment and decrement mips_noreorder rather than using
210 save_reorder_condition. Don't bother to use noreorder in
211 M_L_DOB and M_L_DAB, since append_insn will not insert a NOP.
212 (md_atof): Handle floating point numbers correctly for both
213 big and little endian targets.
214 (s_align, s_cons): Call mips_align rather than frag_align.
215 (s_change_seg, s_cons): Call mips_emit_delays.
216 (s_float_cons): Let float_cons do the work.
217 (s_mipsset): Call mips_emit_delays when setting noreorder.
218 * config/tc-mips.h (tc_frob_label): Define to be
221 * config/obj-ecoff.c (ecoff_build_symbols, ecoff_build_procs,
222 ecoff_frob_files): Consistently use S_GET_VALUE rather than
223 bfd_asymbol_value. Warn if taking difference of symbols in
226 Thu Jul 15 11:51:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
228 * config/obj-ecoff.c (ecoff_frob_file): Discard all open scopes,
231 * config/obj-coffbfd.c (fixup_segment): If TC_M88K, don't adjust
232 by md_pcrel_from if we are relocating against a symbol (we still
233 need md_pcrel_from for a PC relative relocation within the same
235 * config/tc-m88k.c (md_pcrel_from): Corrected return value.
236 (omagic): Removed unused variable.
238 * Preliminary support for m88k-coff.
239 * configure.in (m88k-*-coff*): New target. Use coffbfd and
241 * config/m88kcoff.mt: New file.
242 * read.c (lex_type): New macro LEX_AT to set lex type of '@'.
243 (pseudo_set): Handle difference of symbols in different fragments
244 by saving the entire expression as the value of the symbol.
245 * symbols.c (resolve_symbol_value): Resolve difference
247 * config/obj-coffbfd.c (obj_pseudo_table): If TC_M88K, accept
248 "sdef" as a synonym for "def".
249 * config/obj-coffbfd.h: If TC_M88K, include coff/m88k.h and set
251 (S_IS_LOCAL): Any symbol which includes \001 in the name is local.
252 * config/tc-m88k.c, config/tc-m88k.h: Numerous changes to bring
253 m88k port up to date, and to add COFF support.
255 Wed Jul 14 15:09:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
257 * Removed sy_forward and replaced it with an undefined expression
258 as the value of a symbol.
259 * struc-symbol.h (struct symbol): Removed sy_forward field. Added
260 sy_resolved and sy_resolving single bit fields.
261 * symbols.c (symbol_new): Don't initialize sy_forward field.
262 (resolve_symbol_value): New function to adjust symbol value by
263 fragment address, using recursion to resolve forward symbols.
264 * symbols.h: Added prototype for new function.
265 * read.c (pseudo_set): Set symbolP->sy_value to an undefined
266 expression rather than setting symbolP->sy_forward.
267 * write.c (write_object_file): Use resolve_symbol_value on
268 symbols, keeping the common case (the old behaviour) inline.
269 * config/obj-aout.c (obj_aout_frob_symbol): Removed sy_forward
270 handling (subsumed by write.c change).
271 * config/obj-coff.c, config/obj-coffbfd.c (obj_coff_val): Set
272 sy_value rather than sy_forward.
273 * config/obj-coffbfd.c (obj_coff_endef, yank_symbols): Check
274 expression segment rather than sy_forward.
275 (yank_symbols): Use resolve_symbol_value.
276 (crawl_symbols): Removed extra pass over symbols.
277 * config/obj-aout.c, config/obj-bout.c, config/obj-coff.c,
278 config/obj-vms.c (obj_crawl_symbol_chain): Removed extra pass over
279 symbols which handled sy_forward; use resolve_symbol_value
281 * config/obj-coff.h, config/obj-coffbfd.h (obj_frob_forward_symbol):
283 * config/obj-elf.c (obj_elf_stab_generic): Check expression
284 segment rather than sy_forward.
285 * config/obj-vms.c (VMS_Check_For_Main): Don't initialize
286 sy_forward; do initialize sy_resolved and sy_resolving.
287 * config/tc-hppa.h (STAB_FIXUP): Use sy_value, not sy_forward.
289 * Changes to keep a full expression as the value of a symbol, not
291 * struc-symbol.h: New field sy_value.
292 * as.h: Include expr.h before struc-symbol.h.
293 * expr.h: Use struct symbol rather than symbolS.
294 * symbols.c (S_GET_VALUE, S_SET_VALUE): Rewrote to retrieve value
295 of sy_value field; compile unconditionally, not just if
297 * symbols.h: Compile S_{SG}ET_VALUE prototypes unconditionally.
298 * write.c (write_object_file): Set BFD symbol value to gas symbol
300 * config/obj-aout.h, config/obj-bout.h, config/obj-coff.h,
301 config/obj-coffbfd.h, config/obj-generic.h, config/obj-vms.h
302 (S_GET_VALUE, S_SET_VALUE): Removed macro definitions.
303 * config/obj-ieee.c (S_GET_VALUE, S_SET_VALUE): Removed.
304 * config/obj-coff.h, obj-coffbfd.h: Rewrote several macros to use
305 S_GET_VALUE rather than ost_entry.n_value.
306 * config/obj-aout.c (obj_symbol_to_chars), config/obj-bout.c
307 (obj_symbol_to_chars), config/obj-coff.c (obj_symbol_to_chars),
308 config/obj-coffbfd.c (symbol_to_chars): Get value to write out
309 using S_GET_VALUE--don't assume it is already set.
310 * config/obj-ieee.c (do_symbols): Set BFD symbol value to gas
312 * config/obj-vms.c (various): Don't assign directly to
313 S_GET_VALUE; use S_SET_VALUE instead.
315 Wed Jul 14 09:35:23 1993 Doug Evans (dje@canuck.cygnus.com)
317 * configure.in: Recognize h8300h.
319 Tue Jul 13 12:09:44 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
321 * config/tc-h8500.c (line_comment_chars): Add hash.
322 (parse_exp, skip_colonthing, build_bytes): Add support for
323 R_H8500_HIGH16 relocation type.
325 Mon Jul 12 11:15:34 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
327 * config/obj-elf.c (obj_elf_section): Allow `@' to introduce an
328 attribute name. Handle `execinstr' attribute.
330 Mon Jul 12 07:22:28 1993 Ian Lance Taylor (ian@cygnus.com)
332 * config/tc-mips.c (mips_ip): Don't warn on 'i' or 'j' mismatch if
333 there is another alternative for the instruction.
335 Fri Jul 9 17:31:34 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
337 * doc/as.texinfo: updates for H8/300H
339 Thu Jul 8 14:41:43 1993 Mark Eichin (eichin@cygnus.com)
341 * config/tc-i960.c (md_create_short_jump, md_create_long_jump,
342 md_number_to_chars, md_section_align): Adjusted to use valueT,
343 addressT, to match tc.h.
345 Thu Jul 8 14:15:05 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
347 * config/tc-sparc.c (s_common): Revamp to handle both syntaxes,
348 independent of format.
350 Thu Jul 8 07:25:25 1993 Doug Evans (dje@canuck.cygnus.com)
352 * config/tc-h8300.h (TC_CONS_RELOC): Use R_RELLONG if h8/300h.
354 Wed Jul 7 18:11:07 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
356 * configure.in: define CROSS=-DCROSS_COMPILE if it is a cross
357 build; also recognize h8300-*-coff
359 Wed Jul 7 10:21:24 1993 Ian Lance Taylor (ian@cygnus.com)
361 * symbols.c (fb_label_instance, fb_label_instance_inc): Don't dump
362 core just because somebody uses a label before it is defined.
364 * config/mips-opcode.h: Moved to opcode/mips.h.
365 * config/tc-mips.c: Include opcode/mips.h rather than
367 (append_insn): An extra NOP is only needed after instructions
368 which set HI or LO, not after instructions which read it.
369 (macro_build, mips_ip): Support new 'E', 'G' and 'B' arguments.
370 (macro): cfc1 and ctc1 now take "t,G" rather than "t,d".
371 * config/tc-mips.h (struct mips_opcode): Don't define.
372 * config/mips-big.mt, config/mips-lit.mt (TARG_CPU_DEPENDENTS):
373 Set to $(srcdir)/../include/opcode/mips.h.
375 Get the MIPS assembler up to speed with other gas changes:
377 * config/obj-ecoff.c (ecoff_set_vma, ecoff_frob_symbol):
378 Removed; don't change the symbol value.
379 (ecoff_build_symbols, ecoff_build_procs, ecoff_frob_file): Use
380 bfd_asymbol_value rather than S_GET_VALUE to include section
382 (ecoff_frob_file): Ignore BSF_SECTION_SYM symbols, since ECOFF
383 doesn't output them. Set the vma of sections.
384 * config/obj-ecoff.h: Don't define obj_frob_symbol.
385 * config/tc-mips.c (tc_gen_reloc): Adjustment by section vma is no
387 (various): use valueT rather than long.
389 Wed Jul 7 08:33:30 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
391 * as.h (valueT): Typedef moved here.
392 * struc-symbol.h (valueT): ...from here.
393 * write.c (write_object_file): Locals from_addr, to_addr,
394 table_addr are now addressT. Supply prototype for bfd_alloc for
396 (fixup_segment): Local add_number is now valueT. Correct some
398 (relax_align): Type `int' should be sufficient for the exponent.
399 (fix_new): Argument offset is type offsetT. Locals size and
400 newsize are type valueT.
401 * write.h (struct fix): Fields fx_offset and fx_addnumber are now
403 (fix_new): Fix prototype.
404 * symbols.c (symbol_new): Symbol value is type valueT.
405 (S_SET_VALUE, S_GET_VALUE): Likewise.
406 (S_IS_*): Specify int return type explicitly.
407 * symbols.h (symbol_new, S_GET_VALUE, S_SET_VALUE): Fixed
409 * read.c (s_comm): Values read are type valueT.
410 * expr.h (expressionS): Field X_add_number is an offsetT.
411 * tc.h (md_create_long_jump, md_create_short_jump,
412 md_section_align): Addresses are now type addressT.
413 (md_number_to_chars, md_apply_fix): Pass value as valueT.
414 * config/tc-i386.c (md_create_short_jump, md_create_long_jump,
415 md_number_to_chars, md_section_align): Adjusted.
416 * config/tc-sparc.c (sparc_ip): Initialize `len' variable to make
418 (md_create_short_jump, md_create_long_jump, md_number_to_chars,
419 md_section_align): Adjusted.
421 * config/tc-sparc.c (s_reserve): Permit use for other than a.out
423 (s_common): Handle Solaris-2 version.
425 * config/ho-generic.h (free): Returns void if __STDC__.
427 * config/obj-elf.h (obj_elf_frob_symbol, elf_frob_file,
428 elf_file_symbol): Declare.
430 * expr.c (floating_constant, integer_constant): Now return void.
432 Thu Jul 1 12:13:43 1993 Ian Lance Taylor (ian@cygnus.com)
434 * configure.in: Match on sparc*-fujitsu-none rather than
435 sparclite*-fujitsu-none.
437 Wed Jun 30 11:12:02 1993 Ian Lance Taylor (ian@cygnus.com)
439 * read.c (cons): Conditionalize parsing of expression. Move
440 putting value into object file into separate function. Separate
441 out MRI and WANT_BITFIELDS cases into separate functions.
442 (emit_expr): New function to write data into object file.
443 Conditionalize on TC_CONS_FIX_NEW and TC_CONS_RELOC rather than on
445 (parse_bitfield_cons): New function to parse bitfield expressions
446 as used by i960 assemblers. Only compiled if
447 BITFIELD_CONS_EXPRESSIONS is defined.
448 (parse_mri_cons): New function to parse MRI style strings. Only
449 compiled if MRI is defined.
450 (parse_repeat_cons): New function to parse repeat counts. Only
451 compiled if REPEAT_CONS_EXPRESSIONS is defined.
452 * read.h (emit_expr): Added declaration of new function.
453 * config/tc-a29k.h (TC_CONS_RELOC): Define to be RELOC_32.
454 * config/tc-h8300.h (TC_CONS_RELOC): Define to be R_RELWORD.
455 * config/tc-hppa.c (parse_cons_expression_hppa): New function to
456 parse a HPPA expression, rather than special case in cons
458 (cons_fix_new_hppa): New function to emit an HPPA fixup, rather
459 than special case in emit_expr function.
460 * config/tc-hppa.h (TC_PARSE_CONS_EXPRESSION, TC_CONS_FIX_NEW):
461 Define to use new functions from tc-hppa.c.
462 * config/tc-i960.h (BITFIELD_CONS_EXPRESSIONS): Define.
463 (WANT_BITFIELDS): Removed; now obsolete.
464 * config/tc-mips.h (REPEAT_CONS_EXPRESSIONS): Define.
465 * config/tc-ns32k.c (cons_fix_new_ns32k): New function to emit an
466 NS32K fixup, rather than special case in emit_expr function.
467 * config/tc-ns32k.h (TC_CONS_FIX_NEW): Define to be
468 cons_fix_new_ns32k. Also use PARAMS rather than checking
470 * config/tc-sparc.h (TC_CONS_RELOC): Define to RELOC_32.
472 * write.c (relax_and_size_seg, adjust_reloc_syms, write_contents):
473 Don't core dump if gas has no information about a section.
475 Wed Jun 30 06:21:27 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
477 * write.c (relax_and_size_seg): Always fully process a section.
478 Section size is last frag's (vm)address plus its size. If no
479 relocations are present, force SEC_RELOC flag clear.
480 (dump_section_relocs): New debugging routine.
481 (adjust_reloc_syms): New routine, broken out from write_contents.
482 Don't adjust relocs that are already relative to section symbol.
483 Look for obj_fix_adjustable macro to know what else to skip,
484 instead of obj_write_symbol. Look for section symbol stored in
486 (write_object_file): Map adjust_reloc_syms over all sections.
487 (write_contents): Clear SEC_RELOC flag if no relocations are
490 * as.h (__PTR_TO_INT, __INT_TO_PTR): New versions for Saber, to
493 * write.c (remove_subsegs): Don't define for BFD_ASSEMBLER.
495 Fri Jun 25 14:42:53 1993 K. Richard Pixley (rich@sendai.cygnus.com)
497 * Makefile.in (all, dvi, info, install-info, clean-info): do not
498 echo recursion lines.
499 (install-info, clean-info): collapse into the dvi and info rule.
501 Fri Jun 25 03:43:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
503 * as.h (strstr): Disable declaration for now.
504 (fprint_value, sprint_value): Declare.
506 * subsegs.c (subseg_new_rest): Use memset to clear new frag.
507 (subseg_new) [BFD_ASSEMBLER]: Initialize all seginfo fields.
509 * expr.c (expr_part): Made sanity checks a.out-specific.
510 (expr): Disabled sanity checks.
512 * subsegs.h (segment_info_type) [BFD_ASSEMBLER]: Add field for
514 * subsegs.c (subseg_change): Initialize section symbol pointer
515 when setting up a new section.
517 * symbols.c (symbol_new) [BFD_ASSEMBLER]: Point BFD symbol's udata
518 field back at gas symbol structure.
520 * symbols.c (colon): Cast obstack_next_free value to char* before
521 doing arithmetic on it.
522 * subsegs.c (subseg_new_rest): Likewise.
523 * as.h (frag_now_fix): Likewise.
525 * config/obj-elf.c (elf_file_symbol): Use subseg_new instead of
526 calling bfd_make_section_old_way directly, and call subseg_set
527 instead of subseg_change. Now returns void.
528 (obj_elf_write_symbol): Only check local symbols for now.
529 (elf_stab_symbol): Now static and void, and disabled until it
531 (obj_elf_size): For expression values, fail silently for now.
532 (obj_symbol_new_hook): Do nothing.
534 * config/tc-sparc.c (tc_gen_reloc): Handle BFD_RELOC_SPARC_WDISP22
536 (s_local) [OBJ_ELF]: New function.
537 (md_pseudo_table) [OBJ_ELF]: Call it for "local".
538 (s_common): Rearrange to handle Solaris .common pseudo, which may
539 sometimes use bss space instead of common.
540 * config/obj-elf.h (TARGET_SYMBOL_FIELDS): Add new `local' field.
542 Thu Jun 24 16:33:53 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
544 * configure.in: set host config to hpux for hppa*-hp-hpux
546 Thu Jun 24 13:35:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
548 * app.c (app_pop, app_push): Fix bug reported by Chris Arthur.
550 Tue Jun 22 01:04:23 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
552 * subsegs.c (subseg_new): Don't special-case a.out -R flag here.
553 * config/obj-aout.c (s_sect): Do it here.
555 * as.h (BAD_CASE): Don't make some lame compilers think we want
556 substitution inside strings.
558 * as.c (print_version_id): New function, split off from main.
560 * config/tc-sparc.c (md_parse_option) [OBJ_ELF]: Print version id
561 for -V. Ignore -Q and -s options for now.
563 Mon Jun 21 17:37:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
565 * Makefile.in: make installation & builds work again for crosses
567 Sun Jun 20 18:18:26 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
569 * listing.c (list_symbol_table): Rewrite to print wide (>32 bits)
570 symbol values correctly.
572 * write.c (write_object_file): Deleted unused variables.
573 (fixup_segment): Use sprint_value.
575 * messages.c (sprint_value, fprint_value): New routines.
577 * config/obj-elf.c (elf_stab_symbol): Now returns void.
578 (obj_elf_stab_generic): Fix typo in logic.
580 * Makefile.in (INCLUDES): Look in ../bfd for bfd.h.
582 * as.h (addressT, offsetT): New types, using BFD types if
584 (relax_addressT, struct frag): Use them.
585 * struc-symbol.h (valueT, struct broken_word): Likewise.
587 * as.h (subseg_new) [BFD_ASSEMBLER]: Name argument is const.
588 * subsegs.c (subseg_new) [BFD_ASSEMBLER]: Name argument is const.
590 Thu Jun 17 16:53:56 1993 david d `zoo' zuhn (zoo@cygnus.com)
592 * Makefile.in: canonicalize install.sh; for use within
593 this directory (and subdirs)
595 Sun Jun 20 02:34:04 1993 Ashley Saulsbury (ans@sics.se)
597 * m88k-opcode.h : fixed tiny tiny mistake - xcr was incorrectly
598 specified, should have both S1 and S2 fields identical
599 If only finding the problem was as fast as fixing the bug !!!!
601 Tue Jun 15 16:01:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
603 * write.c (write_contents): Do write out non-loadable sections.
604 Debug sections can fall in this category.
606 * read.c (s_app_file): Call elf_file_symbol for ELF files.
607 * config/obj-elf.c (elf_file_symbol): New function.
609 * config/obj-elf.c (elf_stab_symbol_string): Renamed from pa_...,
610 added argument to specify section base name.
611 (obj_elf_stab_generic): Renamed from ..._stab. New argument
612 specifies section base name.
613 (obj_elf_stab): New function, calls obj_elf_stab_generic with
614 ".stab" as section base name.
615 (obj_elf_xstab): New function, calls obj_elf_stab_generic.
616 (obj_elf_type): Handle "object". Use bitwise-or to merge in
617 symbol flags rather than simply replacing, so global/local flags
619 (obj_elf_ident): Rewrite.
621 Tue Jun 15 17:03:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
623 * Makefile.in: remove parentdir support; use INSTALL_XFORM
625 Wed Jun 9 11:26:07 1993 Ian Lance Taylor (ian@cygnus.com)
627 * config/tc-i386.c (md_pseudo_table): .align uses a power of two
628 for any a.out target, not just Linux and 386BSD.
629 * config/tc-i386.h (DOT_LABEL_PREFIX): Do not define for any a.out
632 Mon Jun 7 13:33:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
634 * config/tc-m88k.c: Don't include flonum.h, md.h, m88k.h. They
635 don't exist or duplicate other inclusions.
637 * config/tc-vax.h (NO_RELOC): Define.
639 Sat Jun 5 19:32:52 1993 Torbjorn Granlund (tege@nada.kth.se)
641 * gas/config/m88k-opcode.h (m88k_opcodes): Add 88110 instructions.
642 * gas/config/tc-m88k.c (get_reg): New arg reg_prefix. Compare first
643 char to reg_prefix instead of to 'r'.
644 (calcop): Change calls to get_reg.
645 (calcop): Handle new case 'x' to set reg_prefix.
646 (calcop): Set reg_prefix to 'r' after each call to get_reg.
647 (cmpslot): Add 88110 conditions.
649 * gas/config/m88k-opcode.h: Swap cases for "rot" for consistency.
651 * gas/config/tc-m88k.c (get_bf): Always restore input_line_pointer
654 * gas/config/m88k-opcode.h (m88k_opcodes): Make equal mnemonics
655 adjacent; mov.s and mov.d swapped.
656 (m88k_opcodes): Fix typo `r2' -> `2'.
658 Fri Jun 4 15:59:31 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
660 * config/h8300.c: Support for H8/300-H opcodes.
662 * config/obj-coffbfd.c (w_strings): String table length is 4
663 bytes, no matter what the host int size is.
665 * configure.in (alpha-*-osf*): New.
667 Fri Jun 4 07:51:18 1993 Ian Lance Taylor (ian@cygnus.com)
669 * configure.in (mips-*-ecoffl*): New target; use ecoff and
671 (mips-*-ecoff*): Added trailing '*'.
673 * config/obj-ecoff.c (ecoff_build_procs): Force the adr of the
674 first FDR in a file to be zero.
676 Thu Jun 3 14:09:59 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
678 * Makefile.in (VERSION): Jump to 2.1.4.
680 * config/ho-hppabsd.h: New file, from Peter Hoogenboom.
682 * config/tc-mips.c (md_assemble): Call bfd_set_gp_size only for
685 Tue Jun 1 15:21:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
687 * config/tc-m68k.c (md_assemble): The 68040 cpu doesn't want a
690 * config/obj-elf.c, config/obj-elf.h: Update for new type, macro,
691 and routine names. Assuming 32 bits for now.
693 * config/obj-elf.c (elf_frob_file): Look for macro
694 elf_tc_final_processing_hook, instead of assuming a function
696 * config/tc-hppa.c (elf_hppa_final_processing_hook): Renamed from
697 tc_final_processing_hook.
698 * config/tc-hppa.h (elf_tc_final_processing_hook): Use it.
700 * config/tc-hppa.h (elf_tc_symbol, elf_tc_make_sections): Macros
701 moved here from obj-elf.h.
702 * config/obj-elf.h: Don't include CPU-specific header files.
704 Sun May 30 16:49:37 1993 Peter Hoogenboom (hoogen@fast.cs.utah.edu)
706 * configure.in: configurations should match on 'hppa*' not 'hppa'.
708 * read.c: Add support for HPPA assembly language syntax (denoted
709 with '#ifdef TC_HPPA').
711 * symbols.c: Add support for HPPA assembly language syntax (denoted
712 with '#ifdef TC_HPPA').
714 * write.c (write_contents): Add support for HPPA-style
717 * config/obj-elf.c: Stab symbols weren't written properly.
720 (obj_elf_write_symbol):
721 (obj_elf_write_symbol_p):
722 (obj_elf_frob_symbol):
726 * config/tc-hppa.c: Support for HPPA symbol extension sections.
727 Remove some unused code. Support for HPPA assembly language
738 (elf_tc_make_sections):
742 Sun May 30 21:44:45 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
744 * config/obj-ecoff.c (obj_read_begin_hook, add_file): Assume
745 hash_new will have succeeded if it returns.
746 * config/tc-a29k.c (md_begin): Likewise.
748 * config/tc-i386.c (tc_aout_fix_to_chars): Now nbytes_r_length is
750 (mode_from_disp_size, opcode_suffic_to_type): Now inline under
752 (fits_in_{signed,unsigned}_{byte,word}): Likewise.
754 * expr.c: Delete register declarations; gcc ignores them anyways.
756 Fri May 28 19:03:32 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
758 * hash.c (hash_new): Use xmalloc, since many callers don't check
761 Thu May 27 13:02:15 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
763 * frags.c (zero_address_frag, bss_address_frag): These are
766 * tc.h (md_reloc_size): This is const.
767 * config/tc-{a29k,h8300,h8500,i386,i860,i960,m68k,ns32k,z8k}.c
768 (md_reloc_size): Now const.
770 * config/aout_gnu.h (enum machine_type, enum reloc_type): Delete
772 * as.h (enum _segT): Ditto.
774 * struc-symbol.h (N_TYPE_seg): This should be const.
776 Thu May 27 11:43:59 1993 Michael Meissner (meissner@osf.org)
778 * config/obj-ecoff.c (add_file): Cast file_name to char * in
779 listing_source_file call.
781 * config/obj-elf.c (elf_stab_symbol_string): Cast first argument
782 of subseg_new call to eliminate const attribute.
783 (obj_elf_stab): Ditto.
784 (obj_symbol_new_hook): Cast first argument of bzero call to char *.
786 * read.c (s_align_bytes): Properly record alignment.
788 * expr.c (__): Undefine __ macro before use, since OSF/1 uses it
789 for the prototype/no prototype macro.
791 * as.c (got_sig): Don't do return ((SIGTY) 0), SIGTY might well be
794 * as.h (relax_stateT enum): Delete trailing comma.
796 Thu May 27 11:07:50 1993 Ian Lance Taylor (ian@cygnus.com)
798 * app.c (do_scrub_begin): Let line_comment_chars override
800 (do_scrub_next_char): If a line comment character is not at the
801 start of a line, treat it as a comment character if it is one.
802 For a CPP line comment use pseudo-op .appline rather than .line.
803 * input-scrub.c (logical_input_line): Make int rather than
805 (input_scrub_push, input_scrub_begin): Initialize
806 logical_input_line to -1 rather than 0.
807 (bump_line_counters): Increment logical_input_line.
808 (new_logical_line): If line_number is -2, decrement
810 (as_where): Use logical_input_line even if it is 0.
811 * read.h (s_app_file prototype): Now takes an int argument.
812 * read.c (potable): Make .appfile call s_app_file with 1. New
813 .appline pseudo-op calls s_app_line.
814 (s_app_file): If .appfile, call new_logical_line with -2 to
815 account for newline inserted by do_scrub_next_char. If listing,
816 call listing_source_file.
817 (s_app_line): New function to handle fake pseudo-op .appline.
818 * config/obj-coff.c (obj_pseudo_table): Make .appline call
820 (obj_coff_ln): Added argument to indicate whether .appline.
821 * config/obj-coffbfd.c (obj_pseudo_table): Make .appline call
823 (obj_coff_ln): Added argument to indicate whether .appline.
824 * config/tc-mips.c (s_file): Pass argument to s_app_file.
826 Tue May 25 11:59:07 1993 Ian Lance Taylor (ian@cygnus.com)
828 * config/obj-bout.h (S_GET_VALUE): Removed unnecessary cast.
830 Thu May 20 19:14:24 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
832 * config/tc-m68k.c (md_apply_fix_2): Straighten out check for
835 Wed May 19 07:33:17 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
837 * config/tc-h5000.c (build_bytes): Understand @rd mode and build
838 relocations correctly.
840 Mon May 17 15:06:26 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
842 * Makefile.in (FLAGS_TO_PASS): Leave out TEXI2DVI for now, because
845 * config/tc-m68k.c (md_apply_fix_2): Apply range checks and warn
846 if value is out of range.
848 Patch from Minh Tran-Le:
849 * config/tc-i386.c (i386_operand): For in/out port register used
850 as base reg, include InOutPortReg in operand type.
851 (MATCH): Accept overlap value of InOutPortReg.
853 Mon May 17 09:29:34 1993 Ian Lance Taylor (ian@cygnus.com)
855 * config/obj-ecoff.c (add_file, obj_ecoff_loc, obj_ecoff_stab):
856 Add calls to listing routines to produce combined source/assembler
858 (obj_ecoff_stab): Create a file pointer if none used yet.
859 (ecoff_frob_file): Set symcount to correct value.
861 Fri May 14 06:53:33 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
863 * Makefile.in (VERSION): Bump to version 2.1, in preparation for
866 * config/obj-aout.h (H_GET_HEADER_SIZE, H_SET_SYMBOL_TABLE_SIZE):
867 Define in terms of constants, not C structure sizes.
869 * config/tc-rs6000.c, config/tc-rs6000.h: Delete empty files.
871 Thu May 13 17:01:55 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
873 * config/obj-aout.c (obj_header_append): Don't define if it's
875 * config/obj-hp300.h (obj_header_append): Define it as a macro.
876 * config/obj-hp300.c (hp300_header_append): New function.
878 * Makefile.in (distclean): Don't bother cleaning up doc files;
879 they aren't going to be in this directory.
881 Thu May 13 07:51:35 1993 Ian Lance Taylor (ian@cygnus.com)
883 * config/obj-ecoff.c (ecoff_build_symbols): Handle absolute
886 * tc.h (TC_COFF_SIZEMACHDEP): Don't define here.
887 * config/tc-sh.h (TC_COFF_SIZEMACHDEP): Define here instead.
889 Mon May 10 06:01:12 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
891 * config/obj-vms.c (VMS_Symbol_type_list): Don't bother with
894 * configure.in (targets): Treat m68*-*-sysv* like m68k-*-coff.
896 Wed May 5 14:00:49 1993 Ian Lance Taylor (ian@cygnus.com)
898 * config/tc-mips.c (macro): Correct floating point double word
899 loads and stores for big endian target.
901 Wed May 5 08:39:21 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
903 * config/tc-i386.c: Replace SEG_* with *_section, fix up subseg_*
904 calls. Deleted some unused code.
905 * config/obj-coff.c: Likewise.
907 ELF support, mostly contributed by Utah:
908 * config/obj-elf.c (obj_elf_section, obj_elf_stab, obj_elf_line,
909 obj_elf_type): Rewrite.
910 (obj_elf_frob_symbol, elf_stab_symbol_string, elf_stab_symbol,
911 obj_elf_desc, obj_elf_version, obj_symbol_new_hook, obj_elf_size):
913 (obj_elf_ident): Dummy.
914 * config/obj-elf.h (FALSE, TRUE, S_*, tc_frob_symbol,
915 TARGET_SYMBOL_FIELDS): New macros.
916 (gdb_section): New variable decl.
918 * config/tc-i386.c (md_atof): Return zero, not empty string, on
921 BFD_ASSEMBLER conditional changes:
922 * config/obj-coff.c (lineno_rootP, seg_N_TYPE, *_section_header):
924 (SA_SET_SYM_ENDNDX, SA_SET_SYM_TAGNDX): New functions.
925 (fetch_coff_debug_section): Ditto.
926 (obj_coff_endef): Call fetch_coff_debug_section.
927 (struct line_no): New type.
928 (c_symbol_merge): New way for copying aux fields.
929 (c_dot_file_symbol): Put symbol in absolute section, and set flag
931 (function_lineoff): New symbol.
932 (function_lineoff, text_lineno_number, our_lineno_number,
933 lineno_lastP): Don't define.
934 (c_line_new): Don't define.
935 (obj_emit_lineno, obj_coff_endef): Use abort calls as, uh,
937 line-number recording gets implemented.
938 (obj_new_symbol_hook): New code for handling aux fields.
939 (add_lineno, add_linesym): New functions.
940 (obj_coff_ln): Call add_lineno, not c_line_new.
941 (obj_coff_endef): New code for handling symbol names. New lineno
942 code. Look for section name "*DEBUG*" for debugging section.
943 (align, coff_check_file_symbols, obj_coff_section,
944 coff_frob_file): New functions.
945 * config/obj-coff.h: Reordered some includes.
946 (BYTE_ORDERING, FILE_HEADER_MAGIC, seg_N_TYPE, N_TYPE_seg,
947 DEFAULT_MAGIC_NUMBER_FOR_OBJECT_FILE, AOUTHDR, AOUTHDRSIZE): Don't
949 (TARGET_SYMBOL_FIELDS, I960_SYM_FIELDS): New macros.
950 (SYM_AUXENT): New macro (for non-BFD_ASSEMBLER too) for accessing
951 aux entries. Most SA_* macros now use it unconditionally.
952 (S_*): Use `bsym' field, and access BFD private data.
953 (SF_*): Use `sy_flags' symbol field for most of these.
954 (H_*, object_headers, lineno, lineno_*P, OBJ_EMIT_LINENO): Don't
956 (*_section_header): Don't define.
957 * config/tc-i386.c (md_convert_frag, md_apply_fix): Changed
959 (tc_gen_reloc) [I386COFF]: New function.
960 (tc_aout_fix_to_chars, tc_coff_fix2rtype): Don't define.
961 * config/tc-i386.h (TARGET_ARCH, TARGET_BYTES_BIG_ENDIAN): New
964 * config/obj-coff.c (stack_init): Don't do assignments inside
966 (obj_coff_def): Simplified handling of symbol name a bit.
967 (tag_insert): Name argument is now pointer to CONST.
968 (obj_crawl_symbol_chain): Commented out.
970 * config/obj-coff.h: Use PARAMS macro in prototypes.
972 * write.c (relax_and_size_seg) [BFD_ASSEMBLER]: Don't indirect
973 through frchainP pointer if it is null.
975 * configure.in: Warn if BFD mode is explicitly turned off but is
976 required by specified target.
977 (mips ecoff targets): Don't need to set bfd_gas here; it gets
980 * config/obj-coffbfd.c (crawl_symbols): Don't clear sy_forward
982 (yank_symbols): Merge symbols only if sy_forward is null.
984 * config/tc-m68k.h (AOUT_MACHTYPE): Don't define if already
987 * tc.h (md_convert_frag) [BFD_ASSEMBLER]: Section arg is not
989 * config/tc-m68k.c (md_convert_frag) [BFD_ASSEMBLER]: Ditto.
991 * config/tc-sparc.h (LOCAL_LABEL) [OBJ_ELF]: Anything starting
992 with "." is a local label.
994 * config/te-hppa.h, config/tc-hppa.h, config/tc-hppa.c: New config
997 * config/te-linux.h, config/te-386bsd.h: New config files.
998 * configure.in (i386-*-linux, i386-*-bsd): Use them.
999 * config/tc-i386.h (TARGET_FORMAT): Select format based on target
1001 (DOT_LABEL_PREFIX): Don't define for 386bsd or Linux.
1003 Wed May 5 13:14:01 1993 Ian Lance Taylor (ian@cygnus.com)
1005 * config/obj-ecoff.c (init_file): Set fMerge to 0 since dbx seems
1006 to want it that way.
1007 (ecoff_build_symbols): Turn local st_Proc symbols into
1008 st_StaticProc symbols. Set index field of external st_Proc and
1009 st_staticProc symbols correctly.
1010 * config/tc-mips.h (NO_LISTING): Don't define. People might want
1013 Tue May 4 21:22:54 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1015 * config/obj-hp300.h, config/obj-hp300.c, config/te-hp300.h: New
1017 * configure.in (m68k-*-hpux): Use them.
1019 * config/obj-aout.c (obj_pre_write_hook): Use AOUT_VERSION if
1020 defined, otherwise zero.
1022 * config/aout_gnu.h (OMAGIC): Don't define if already defined.
1024 Mon May 3 15:59:32 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1026 * config/tc-sparc.c (sparc_ip): Allow any abs expression as an
1027 address space number.
1029 Wed Apr 28 19:11:22 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
1031 * config/obj-aout.h (TARGET_DEFAULT): Don't default this at all.
1033 * config/tc-a29k.c: Include ctype.h.
1034 (define_some_regs): Added special-purpose registers for 29050.
1036 * config/tc-i386.c (comment_chars) [TE_I386AIX]: Include "/".
1038 * config/obj-coffbfd.c (fill_section): Don't set STYP_REG here.
1039 (change_to_section): Set it here instead.
1041 Wed Apr 28 13:40:29 1993 Ian Lance Taylor (ian@rtl.cygnus.com)
1043 * config/obj-ecoff.c (obj_symbol_new_hook): Make up a .file if one
1044 hasn't been seen yet.
1045 (add_ecoff_symbol): Don't refer to cur_file_ptr if it is NULL.
1047 Mon Apr 26 18:29:05 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1049 * config/tc-sh.ch, config/tc-sh.h: New files supporting Hitachi
1052 Mon Apr 26 12:28:27 1993 Ian Lance Taylor (ian@cygnus.com)
1054 * expr.c (operand): Fix unary plus operator (previously was the
1055 same as '~' operator!).
1057 Wed Apr 21 00:20:11 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1059 * write.c (cvt_frag_to_fill): Define even if BFD is defined.
1060 (write_object_file): Do define if BFD_ASSEMBLER. Invoke
1061 obj_check_file_symbols if defined. Call verify_symbol_chain_2
1062 instead of open-coding it. Fix some bugs in patching up symbol
1064 (relax_segment): Make some code we "ought to be able to" use for
1065 all targets no longer conditionalized on ns32k target; instead, do
1066 it always, and if the appropriate conditions fail, abort.
1068 * symbols.c (DEBUG): Enabled.
1069 (symbol_new): Make sure bfd_make_empty_symbol works.
1070 (verify_symbol_chain_2): New funcion; takes one symbol as
1071 argument, anywhere in the chain.
1072 (dollar_label*): Use default initializers.
1074 * as.c (perform_an_assembly_pass): Call md_begin here...
1075 (main): ...and not here.
1077 * config/tc-m68k.h (TARGET_FORMAT): Use a.out-sunos-big for a.out.
1078 (tc_frob_symbol): New macro: Get rid of symbols in reg_section.
1080 * config/tc-m68k.c (omagic): Don't define for BFD_ASSEMBLER.
1081 (add_fix, add_frag): Now functions instead of macros.
1082 (m68k_reg_parse, m68k_ip, md_estimate_size_before_relax, get_num,
1083 s_data1, s_data2, s_bss): Use new *_section names, for
1084 compatibility with BFD_ASSEMBLER mode; rewrite switch statements
1085 to handle non-integral segT.
1086 (tc_coff_fix2rtype, tc_aout_fix_to_chars,
1087 tc_coff_symbol_emit_hook): Don't define for BFD_ASSEMBLER.
1088 (tc_gen_reloc): New routine for BFD_ASSEMBLER.
1089 (md_apply_fix, md_apply_fix_2): Renamed old md_apply_fix to
1090 md_apply_fix_2; new md_apply_fix definition varies interface
1091 depending on BFD_ASSEMBLER.
1092 (md_convert_frag, md_convert_frag_1): Likewise. Use new *_section
1095 * config/obj-vms.c: Include config.h.
1096 (version_string): Delete declaration.
1097 (Write_VMS_MHD_Records): Use GAS_VERSION instead.
1098 (vms_resolve_symbol_redef): New function, taken from VMS code in
1101 (VMS_Store_Struct, VMS_Def_Struct, VMS_Set_Struct,
1102 VMS_TBT_Block_End, get_VMS_time_on_unix, generate_suffix,
1103 VMS_Psect_Spec): Fixed to compiler under traditional C.
1104 * config/obj-vms.h: Use PARAMS macro.
1105 (vms_resolve_symbol_redef): Declare.
1106 (RESOLVE_SYMBOL_REDEFINITION): New macro.
1107 * symbols.c (colon): Remove some VMS-specific code, look for
1108 RESOLVE_SYMBOL_REDEFINITION macro instead.
1110 * config/tc-m68k.c (m68k_ip): Don't try expanding DBcc
1113 * config/tc-i386.c: Reordered some functions so inlining might
1114 work. Use PARAMS in function declarations.
1115 (reloc): New routine.
1116 (md_assemble): Rearrange switch statements to work with
1119 * struc-symbol.h [BFD_ASSEMBLER]: Undefine
1120 SYMBOLS_NEED_BACKPOINTERS before defining it.
1122 * subsegs.c (subseg_new_rest): Now static.
1124 * read.c (pseudo_set): Better error message for difference of
1125 symbols in different frags.
1127 * Makefile.in (check): Pass down some new variables, indicating
1128 pathname or program name for cc, nm, objdump.
1130 * as.h (OUTPUT_FLAVOR): New macro.
1131 * config/tc-sparc.c (tc_gen_reloc): Use OUTPUT_FLAVOR.
1133 * configure.in: Initialize bfd_gas properly. Warn that ELF
1134 support is incomplete.
1136 Thu Apr 15 22:39:05 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1138 * read.c (float_cons): Accept null pointer return from md_atof.
1139 * config/tc-m68k.c (md_atof): Return null for success.
1140 * config/tc-sparc.c (md_atof): Ditto.
1142 Thu Apr 15 16:04:39 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
1144 * doc/as.texinfo: formatting and comment cleanups; show SPARC
1145 alternative options in same style as other machines; simplify some
1146 conditional use; include GPL as separate file (from texinfo dir)
1148 * doc/Makefile.in: (as.info) include directory containing GPL in
1149 makeinfo search path
1151 * doc/h8.texi: new file; conditional settings for GAS manual
1154 Tue Apr 13 15:31:40 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
1156 * doc/as.texinfo: mention SPARC architecture options.
1158 Fri Apr 9 17:43:11 1993 Ken Raeburn (raeburn@cygnus.com)
1160 * configure.in: Rearranged whitespace in per-host/per-target
1161 sections. Added hooks for dropping in HPPA support (not included
1162 yet). Separate out overrides of variables based on target format
1163 and bfd-gas selection from actual target-specific commands. Add
1164 error message for recognized but unsupported format name.
1166 Fri Apr 9 09:05:47 1993 Ian Lance Taylor (ian@cygnus.com)
1168 * config/obj-ecoff.h (ecoff_build_lineno): Make ilineMax in
1169 symbolic header match cline in FDR; the native linker seems to
1172 Thu Apr 8 15:51:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1174 * doc/Makefile.in: as.texinfo is in $(srcdir). Use
1175 $(srcdir)/as.texinfo explicitly in several places
1177 Thu Apr 8 15:15:02 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
1179 * doc/Makefile.in: update dvi, clean targets for new source
1182 Thu Apr 8 12:52:46 1993 Ian Lance Taylor (ian@cygnus.com)
1184 * config/ho-decstatn.h: Define BROKEN_ASSERT if not __GNUC__,
1185 rather than undefining know.
1186 * configure.in: Match ultrix*, not just ultrix.
1188 Wed Apr 7 20:18:10 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
1190 * doc/as.texinfo: converted conditional markup to use new
1191 Texinfo facilities, avoiding m4.
1193 * doc/as-all.texinfo, all.m4, pretex.m4: deleted.
1195 * doc/Makefile.in: recast doc configuration to use a link to an
1196 included texinfo file.
1198 * doc/all.texi: settings for generic form of documentation.
1200 Tue Apr 6 11:56:21 1993 Ian Lance Taylor (ian@cygnus.com)
1202 * read.c (cons): Zero out frag when creating reloc.
1204 Mon Apr 5 09:41:58 1993 Ian Lance Taylor (ian@cygnus.com)
1206 * config/tc-mips.c (gp_reference): Certain magic symbols can never
1207 be referenced off the GP register.
1209 * app.c (do_scrub_next_char): Handle states 9 and 10 correctly
1210 when dealing with characters of type LEX_IS_TWOCHAR_COMMENT_1ST,
1211 LEX_IS_STRINGQUOTE, and LEX_IS_ONECHAR_QUOTE.
1213 * config/te-irix.h: New file; irix needs a different LOCAL_LABEL
1214 definition from other MIPS targets.
1215 * configure.in (mips-*-irix): Use emulation irix.
1217 Sun Apr 4 15:21:09 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1219 * config/tc-h8500.c: Get relax size of branch instructions right,
1220 (get_operand): Parse @sp+ correctly.
1222 Fri Apr 2 15:59:49 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1224 * subsegs.h (segment_info_type) [BFD_ASSEMBLER]: Don't include
1225 COFF section header field.
1227 * configure.in: Print error message if host or target is not
1230 * configure.in: If with-bfd-assembler, use obj-coff instead of
1233 * config/ho-generic.h: Include string.h.
1235 Fri Apr 2 08:54:57 1993 Ian Lance Taylor (ian@cygnus.com)
1237 * config/tc-mips.h (LOCAL_LABEL): Treat any label starting with
1238 '$' as local, for any object file format.
1240 * config/tc-mips.c (macro): Optimizations to branching code and a
1241 couple of bug fixes from ralphc@pyrps5.eng.pyramid.com (Ralph
1244 * config/ho-irix.h: New file; if not gcc, define BROKEN_ASSERT.
1245 * configure.in (mips-sgi-irix*): Set gas_host to irix.
1247 Wed Mar 31 17:53:54 1993 Ian Lance Taylor (ian@cygnus.com)
1249 * subsegs.c (subseg_new): Set output_section of new section.
1250 * as.c (perform_an_assemly_pass): Don't set output_section here.
1251 * expr.c (expr_part, expr): Turn off section assertions for ECOFF,
1252 since it has additional sections.
1253 * read.c (s_lcomm): For MIPS ECOFF, put small objects in .sbss,
1255 * config/obj-ecoff.h (TARGET_SYMBOL_FIELDS): Added
1256 ecoff_undefined field.
1257 * config/obj-ecoff.c (obj_symbol_new_hook): Initialize
1258 ecoff_undefined field.
1259 (add_file): If using stabs, just output a stabs symbol rather than
1261 (obj_ecoff_begin, obj_ecoff_bend): Ignore line number by reading
1262 it with get_absolute_expression, rather than skipping it by hand.
1263 (obj_ecoff_loc): If using stabs, just output a stabs symbol rather
1264 than ECOFF line number information.
1265 (obj_ecoff_stab): Accept non-zero values for stabs line number.
1266 (ecoff_build_symbols): Set ifilesym correctly. Set storage class
1267 to small, undefined and/or readonly sections if appropriate.
1268 Don't output symbol names containing \001 characters.
1269 (ecoff_frob_file): Make sure at least one fdr is output.
1270 * config/tc-mips.h: Define TC_MIPS.
1271 * config/tc-mips.c (g_switch_value): New static variable.
1272 (md_assemble): Set gp size of output BFD.
1273 (gp_reference): New function; returns 1 if expression can be
1274 accesssed via gp. Always returns 0 if not using ECOFF.
1275 (macro_build): Convert BFD_RELOC_LO16 to BFD_RELOC_MIPS_GPREL if
1277 (macro): Generate sequences using gp if possible.
1278 (md_parse_option): Ignore -EL and -EB. Parse -G.
1279 (md_apply_fix): Added BFD_RELOC_MIPS_GPREL to ignored case.
1280 (s_change_sec): Handle .rdata and .sdata for ECOFF.
1281 (s_extern): Mark symbol as external. Set ecoff_undefined field.
1283 Tue Mar 30 10:11:41 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1285 * output-file.c (output_file_create): Don't call as_perror for
1286 filename rejected by application.
1288 * as.c (main) [BFD_ASSEMBLER]: If errors occur, close and unlink
1291 * doc/as.texinfo: Don't use @value in node names for the moment;
1292 references don't appear to work right.
1294 * as.h (const, volatile): Put these definitions back, and use
1297 * doc/as.texinfo: First pass at using new texinfo features --
1298 variables, conditional tests. Far from complete.
1300 Mon Mar 29 16:05:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1302 * read.c: Temporary hack to handle some 64-bit constants. This
1303 should be redone later.
1304 (target_big_endian): Declare.
1305 (big_cons): If it's set, reverse order of bytes being copied.
1306 * config/tc-sparc.c (md_begin): Set target_big_endian.
1308 * read.c (s_ignore): Delete declaration of is_end_of_line.
1310 * config/obj-coffbfd.c (yank_symbols): Build list of file symbol
1311 forward pointers properly.
1313 Mon Mar 29 13:47:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1315 * config/obj-coffbfd.c (do_relocs_for): Fix bug where nrelocs
1316 wasn't being stored into scnhdr.
1317 * config/obj-coffbfd.h: Add prototype of s_get_segment.
1318 * read.c (TC_START_LABEL): Default definition.
1319 (read_a_source_file): Use TC_START_LABEL macro to work out
1320 if a label has been seen.
1322 Mon Mar 29 12:56:56 1993 Ian Lance Taylor (ian@cygnus.com)
1324 * configure.in: Set BFDDEF and BFDLIB at the top of Makefile, not
1325 the bottom (make expands variables in dependencies when the
1326 dependencies are read, not when they are used).
1328 * config/obj-coffbfd.c (fill_section): Don't set NOLOAD bit for
1329 a29k .bss section; the mondfe program doesn't like it.
1331 Sun Mar 28 08:12:53 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1333 * config/tc-m68k.c: Use PARAMS macro, and use CONST instead of
1335 (current_architecture): Don't need initializer.
1337 Fri Mar 26 08:12:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1339 * doc/none.m4: Define Z8000.
1340 * doc/Makefile.in (as-*.texinfo): Refer to $(srcdir). Remove the
1341 texinfo file before recreating it.
1342 (TEXI2DVI): Need to set TEXINPUTS if "make as.dvi" is to work in
1344 (srcdir): Delete second, bogus definition.
1345 (as.info): Look for as-*.texinfo in current directory rather than
1349 * doc/configure.in: Create links to all as-*.texinfo files in the
1350 source directory, if that's not the current directory.
1352 * configure.in (per-host): Accept MIPS host with BSD version
1354 (per-target): Classify i486 as i386. Use generic cpu_type instead
1355 of target_cpu in selecting format etc.
1357 * app.c (do_scrub_next_char): Use .appfile, not .app-file.
1358 * read.c (potable): Change .app-file to .appfile.
1360 * config/ho-decstatn.h: Renamed from ho-decstation.h.
1361 * configure.in: Adjusted.
1363 * config/obj-bfd-sunos.*: Unused; deleted.
1365 * Makefile.in (version.c, vers-stamp): Deleted.
1366 (config.h): Define GAS_VERSION.
1367 * as.c (version_string): Deleted declaration.
1368 (main): Look for GAS_VERSION instead.
1370 * doc/as.texinfo: Updated description of -a* (listing) options,
1371 and describe how to pass them through from gcc.
1373 * config/obj-coffbfd.c (do_relocs_for): Don't allocate storage or
1374 process relocs if there aren't any relocs to process. Avoids
1375 malloc/free bug on SCO too.
1377 * as.h: Move local include files below system include files, to
1378 avoid some redefinition complaints on some systems.
1379 (const, volatile): Don't need these conditionally defined if we
1380 use CONST and VOLATILE from ansidecl.h.
1381 (seg_name): Use CONST, not const.
1383 Fri Mar 26 10:22:04 1993 Ian Lance Taylor (ian@cygnus.com)
1385 * config/tc-mips.c: Reindented to GNU standards.
1387 Thu Mar 25 08:59:14 1993 Ian Lance Taylor (ian@cygnus.com)
1389 * config/obj-coffbfd.c (do_relocs_for): Remove a29k special case.
1390 (fixup_segment): Add a29k special case; the linker is not prepared
1391 to see a segment offset here.
1393 * app.c (do_scrub_next_char): Added new state, 10, modifying state
1394 9 to only keep a space in between identifier characters.
1396 Wed Mar 24 02:16:22 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1398 * Makefile.in: add dvi target; as-$(config).texinfo might live in
1399 srcdir, might be in objdir.
1401 * doc/Makefile.in: dvi depends on as.dvi
1403 Mon Mar 22 23:59:13 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1405 * Makefile.in: add installcheck target
1407 Mon Mar 22 10:19:00 1993 Ian Lance Taylor (ian@cygnus.com)
1409 * config/tc-mips.c (macro): Use $AT for any floating point load.
1411 Sat Mar 20 12:50:51 1993 Ken Raeburn (raeburn@urth.cygnus.com)
1413 * config/tc-m68k.c (m68k_ip): For operand type 'M', reject
1414 bignums, but don't emit error message.
1416 Fri Mar 19 21:02:19 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1418 * Makefile.in (targ-cpu.o): Depend on config.h.
1420 Wed Mar 17 16:44:06 1993 Ian Lance Taylor (ian@cygnus.com)
1422 * app.c (do_scrub_next_char): Added new state, 9, to avoid
1423 dropping a space immediately following an identifier.
1424 * expr.c, write.c: Rewrote assert expressions to not use multiple
1425 lines; I don't think that can be done portably.
1426 * config/tc-mips.c (macro): Use $AT if target register is zero in
1427 load instruction, which it can be for a floating point load.
1429 Mon Mar 15 12:17:28 1993 Ian Lance Taylor (ian@cygnus.com)
1431 * write.c (write_contents): Compute the relocs before writing out
1432 the section contents.
1433 * config/obj-ecoff.h, config/obj-ecoff.c: Numerous changes to get
1434 symbol table and values right.
1435 * config/tc-mips.h (LOCAL_LABEL): If OBJ_ECOFF, any label starting
1437 * config/tc-mips.c (tc_gen_reloc): If OBJ_ECOFF, adjust the addend
1440 * config/z8k.mt (TARG_CPU_DEPENDENTS): The relevant file is
1441 z8k-opc.h, not z8k.h.
1443 * config/obj-coffbfd.c (obj_coff_endef): Correct test for .bf
1446 Fri Mar 12 18:33:36 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1448 * configure.in: recognize sparc-sun-solaris2* instead of -solaris2
1450 Fri Mar 12 12:00:07 1993 Ian Lance Taylor (ian@cygnus.com)
1452 * expr.c, write.c: Ultrix native 4.2 cc requires assert condition
1453 to be on a single line.
1455 Thu Mar 11 17:56:22 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1457 * Makefile.in (config.h): Create file, writing out definitions of
1458 target cpu, alias, and canonical name.
1459 (ALL_CFLAGS): No longer define TARGET_CPU.
1461 * Makefile.in (check): Print a message, instead of quitting
1464 * as.c (main): Don't catch any signals, for now.
1466 * version.c: Deleted.
1467 * Makefile.in: Generate it, putting in only the version number
1469 (VERSION): New variable.
1470 * as.c: Include config.h.
1471 (main): Reformatted version string. Include target alias. Don't
1472 print if not requested (i.e., unknown -v argument).
1474 * as.c (stralloc): Deleted.
1475 (main): Call strdup instead.
1477 * configure.in: Handle all 68300 series chips.
1478 * config/tc-m68k.c: Include config.h.
1479 (md_assemble): Assume TARGET_CPU is defined. Accept some 68300
1480 series cpus as defaults.
1481 (md_parse_option): Accept some m68300 series CPUs as defaults.
1483 Wed Mar 10 17:41:16 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1485 * as.c (EXIT_SUCCESS, EXIT_FAILURE): Define to normal values if
1486 not already defined.
1487 (main, got_sig): Use them.
1488 * config/ho-vms.h (EXIT_SUCCESS, EXIT_FAILURE): Reverse default
1491 Tue Mar 9 07:40:06 1993 Ian Lance Taylor (ian@cygnus.com)
1493 * config/obj-ecoff.c, config/obj-ecoff.h: Preliminary ECOFF
1496 * config/tc-mips.h (TARGET_FORMAT): Define based on OBJ_AOUT vs.
1497 OBJ_ECOFF as well as TARGET_BYTES_*_ENDIAN.
1498 (struct loc, struct proc, struct file): Moved to tc-mips.c within
1499 #ifndef OBJ_ECOFF block, since ECOFF uses different versions.
1500 * config/tc-mips.c: Rearranged for ECOFF support. Added
1501 prototypes for all static functions. Moved existing minimal
1502 debugging format support info #ifndef OBJ_ECOFF blocks.
1503 (macro_build_lui): Eliminated sign_extend argument, because ECOFF
1504 does not support a non sign extended high 16 bits reloc. Adjusted
1505 all callers accordingly.
1506 (tc_get_register): Renamed from get_register, and made non-static.
1508 * config/mips-big.mt, config/mips-lit.mt: New files. Define
1509 TARGET_BYTES_BIG_ENDIAN and TARGET_BYTES_LITTLE_ENDIAN,
1511 * configure.in (mips-*-bsd*): Use gas_target mips-lit.
1512 (mips-*-ultrix*, mips-*-irix*, mips-*-ecoff): New targets, using
1513 obj_format ecoff and gas_target mips-lit or mips-big.
1515 Tue Mar 9 07:43:01 1993 Ken Raeburn (raeburn@cygnus.com)
1517 * version.c: Bump to version 2.0.1.
1519 Tue Mar 9 07:40:06 1993 Ian Lance Taylor (ian@cygnus.com)
1521 * write.c (chain_frchains_together): Check that seg_info (section)
1523 (write_object_file): Call obj_frob_file after setting the symbols,
1526 Tue Mar 9 00:00:00 1993 Ken Raeburn (raeburn@cygnus.com)
1528 * Version 2.0 released.
1530 Mon Mar 8 14:57:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1532 * config/tc-i386.h (TC_COUNT_RELOC): Look for fx_addsy only.
1534 Fri Mar 5 09:05:55 1993 Ian Lance Taylor (ian@cygnus.com)
1536 * read.h: Define stringer here.
1537 read.c, config/obj-ieee.c, config/obj-tcm88k.c: Not any of these
1540 Thu Mar 4 11:52:23 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1542 * read.c (s_space): Multiply repeat count by mult, not fill.
1544 Thu Mar 4 05:20:42 1993 Ken Raeburn (raeburn@cygnus.com)
1546 * read.c: Include ctype.h.
1548 Wed Mar 3 10:41:46 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1550 Patches from Eric Youngdale:
1551 * make-gas.com: Find obstack.obj if it's not in the current
1553 * read.c (s_ignore): Don't declare is_end_of_line. It's
1554 redundant, and triggers a VMS gcc compiler bug.
1556 * write.c (write_object_file): Macro SUB_SEGMENT_ALIGN now takes
1557 current segment as an argument. (Ignored in all cases but VMS.)
1558 All callers and definitions changed.
1560 Tue Mar 2 11:56:19 1993 Ian Lance Taylor (ian@cygnus.com)
1562 * listing.c: Cleaned up a bit, added prototypes, made NO_LISTING
1565 Tue Mar 2 08:53:34 1993 Ken Raeburn (raeburn@cygnus.com)
1567 * config/tc-m68k.c (isbyte): Accept all values from -255 to +255,
1568 so "~0x80" won't be rejected.
1570 * config/obj-elf.c: No longer include elf/reloc.h.
1571 (obj_elf_section): Set SEC_READONLY and SEC_CODE for text section.
1572 (obj_elf_stab, obj_elf_desc): Deleted do-nothing and commented-out
1574 (obj_elf_xstab): New routine.
1575 (obj_elf_set_size): Call as_warn, not fprintf. Pass desired
1576 argument to s_ignore. Put "#if 0" around unused code.
1577 (obj_pseudo_table): Use s_ignore instead of do-nothing routines.
1578 Call elf_xstabs for .stabs and .xstabs operators.
1580 * config/tc-sparc.h (TARGET_FORMAT) [OBJ_ELF]: Now "elf32-sparc".
1582 * write.c (relax_and_size_seg): Set SEC_RELOC only if fixups are
1585 * configure.in: mips-bsd configuration was missing format spec.
1588 * Makefile.in (Makefile): Depends on configure.in.
1590 * config/tc-mips.c (append_insn): Don't check for alignment of
1591 frag in memory; alignment of instructions in section is a separate
1594 * config/tc-mips.c (macro_build_lui): Fix some assumptions of ANSI
1597 * listing.h: Always provide function declarations, not macros, so
1600 Tue Mar 2 00:50:43 1993 John Gilmore (gnu@cygnus.com)
1602 * CONTRIBUTORS: Update Gilmore entry.
1604 Wed Feb 24 14:58:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1606 * frags.c (frag_init): New function.
1607 (zero_address_frag, bss_address_frag): Now initialized at run
1609 * as.c (main): Call frag_init.
1611 Wed Feb 24 10:32:42 1993 Ian Lance Taylor (ian@cygnus.com)
1613 * app.c (do_scrub_next_char): In LEX_IS_LINE_COMMENT_START case:
1614 Don't unget ch2 if we didn't get it.
1616 Wed Feb 24 04:14:07 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1618 * doc/Makefile.in (TEXIDIR): Updated for new layout.
1620 * config/tc-sparc.c (s_common): Add support for ELF version.
1621 (tc_gen_reloc) [BFD_ASSEMBLER]: New function.
1622 * config/tc-sparc.h (TARGET_ARCH, TARGET_FORMAT) [BFD_ASSEMBLER]:
1624 (md_convert_frag): New macro.
1626 * config/tc-m68k.c (m68k_ip): For PC-relative addressing of a
1627 symbol, fix the offset so "+2" isn't required.
1629 * config/tc-i960.c (line_comment_chars, line_separator_chars):
1630 Define as common/bss.
1631 (op_hash, reg_hash, areg_hash, iclasses_seen, br_cnt): Default C
1632 initializers are sufficient.
1634 * config/obj-aout.h [BFD_ASSEMBLER]: Include libaout.h from bfd.
1635 (TARGET_FORMAT) [BFD_ASSEMBLER]: Default to "a.out".
1636 (S_SET_*, S_GET_*, obj_frob_symbol) [BFD_ASSEMBLER]: New macros.
1637 (S_SET_TYPE) [!BFD_ASSEMBLER]: New macro.
1638 * config/obj-aout.c: Use PARAMS macro for declarations. Remove
1639 "IGNORE_DEBUG" conditional, since both branches are identical.
1640 Use S_SET_TYPE, S_GET_TYPE, and S_GET_DESC instead of directly
1641 referencing symbol structure members.
1642 (obj_aout_frob_symbol) [BFD_ASSEMBLER]: New function.
1644 * as.h (struct frag): Reordered a couple of fields for better
1647 * write.c (record_alignment) [BFD_ASSEMBLER]: Record it in the
1649 (write_contents) [BFD_ASSEMBLER]: New function.
1650 (write_object_file) [BFD_ASSEMBLER]: Always handle -R here. Call
1651 fix_new with BFD_RELOC_NONE instead of 0 or NO_RELOC. Call
1652 obj_frob_file, obj_frob_symbol, tc_frob_symbol if defined.
1653 (fixup_segment): Make sure common-section symbols get treated the
1654 same as undefined symbols.
1655 (fix_new) [BFD_ASSEMBLER]: Argument r_type is of type
1656 bfd_reloc_code_real_type. Use seg_fix_{root,tail}P derived from
1658 * write.h (fix_new): Update prototype.
1660 * tc.h (md_operand, md_convert_frag, tc_headers_hook,
1661 md_section_align, md_undefined_symbol): Don't provide prototypes
1662 if these are defined as macros.
1663 (md_convert_frag) [BFD_ASSEMBLER]: BFD version needs bfd and
1666 * symbols.c (symbol_new): Argument NAME is now pointer to const.
1667 Simplified STRIP_UNDERSCORE code. Remove assumptions about null
1668 pointers in freshly allocated storage. [BFD_ASSEMBLER]: Get new
1670 (colon): Display other/desc fields of redefined symbol only if
1671 S_GET_OTHER and S_GET_DESC are defined.
1672 (symbol_make): Argument NAME is now pointer to const.
1673 (symbol_find, symbol_find_base): Likewise.
1674 (S_IS_*, S_GET_*, S_SET_*) [BFD_ASSEMBLER]: New functions.
1675 * symbols.h: Fix prototypes for new const arguments. Add
1676 prototypes for BFD_ASSEMBLER S_* functions.
1678 * subsegs.c (subseg_change) [BFD_ASSEMBLER]: BFD version of code
1679 for changing to an existing section.
1680 (subseg_new_rest) [BFD_ASSEMBLER]: Split off from subseg_new,
1681 called by subseg_new and subseg_set.
1682 (subseg_new) [BFD_ASSEMBLER]: Rewritten to change to new section,
1683 given section name and subseg number.
1684 (subseg_set) [BFD_ASSEMBLER]: New function; change to a possibly
1685 new section/subsection.
1687 * read.c: Don't include ctype.h.
1688 (cons) [BFD_ASSEMBLER]: For undefined symbols, use BFD_RELOC_32
1689 for now; should be machine-dependent.
1691 * configure.in: Accept *-*-elf and *-*-solaris* as ELF format
1692 targets, forcing BFD use.
1694 Wed Feb 17 18:59:03 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1696 * config/tc-sparc.c: Use PARAMS macro for static function
1697 declarations. Use BFD_RELOC_ macros everywhere, with
1698 compatibility macros declared for non-BFD mode.
1699 (struct sparc_it) [BFD_ASSEMBLER]: Use bfd_reloc_code_real_type
1700 instead of enum reloc_type.
1701 (emit_sparc_reloc): Commented-out function deleted.
1702 (md_convert_frag): Deleted.
1703 (tc_aout_pre_write_hook): Don't define for BFD_ASSEMBLER.
1704 (md_apply_fix): Changed calling sequence (conditionally) for BFD
1706 * config/tc-sparc.h (md_convert_frag): New macro.
1708 * config/obj-aout.c (obj_aout_stab): Refer to undefined_section,
1709 not SEG_UNKNOWN. Use S_SET_TYPE, S_GET_TYPE, S_GET_DESC instead
1710 of referencing fields directly.
1712 * write.c (cvt_frag_to_fill): New function; extracted from
1714 (write_object_file) [! BFD_ASSEMBLER]: Call it.
1715 (relax_and_size_seg) [BFD_ASSEMBLER]: New function; relax section
1716 and set its size and flags.
1718 * struc-symbol.h (struct symbol) [BFD_ASSEMBLER]: Replace some
1719 fields with BFD equivalents. Turn on back-pointers, and add
1720 target-specific fields at end.
1722 Thu Feb 11 09:20:37 1993 Ian Lance Taylor (ian@cygnus.com)
1724 * config/obj-coffbfd.c (fill_section): Don't set vaddr here.
1725 (write_object_file): Set it here instead, so that fixup_segment
1726 can see the correct value.
1728 Mon Feb 8 13:56:17 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1730 * write.c (write_object_file): Check for errors and warnings and
1731 bail out before processing contents.
1732 (chain_frchains_together_1): New function, does most of the work
1734 (chain_frchains_together) [BFD_ASSEMBLER]: New function.
1735 (remove_subsegs) [! BFD]: Call it.
1736 (write_object_file) [BFD_ASSEMBLER]: Converted to use BFD
1737 structures and routines.
1739 * config/obj-elf.*: New files.
1741 * config/mips.mt, config/rs6000.mt: Deleted.
1743 * config/h8300.mt: Don't specify compiler here.
1745 * config/z8k.mt: The z8k code depends on the z8k opcode table,
1747 * config/tc-z8k.h: Comment fix.
1749 * write.c: Reordered some functions for better inlining.
1750 (fixup_segment): Linkrelax code is no longer conditional on
1753 Thu Feb 4 12:45:16 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1755 * config/{h8500.mt, tc-h8500.c, tc-h8500.h, obj-coffbfd.c,
1756 obj-coffbfd.h}: support for the H8/500
1758 Wed Feb 3 19:28:18 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1760 * config/obj-vms.h (SUB_SEGMENT_ALIGN): Define VMS version here.
1761 * write.c (write_object_file): Not here.
1762 (fix_new): Initialize fx_addnumber.
1764 * listing.c: Don't include target-cpu.h explicitly, since as.h
1767 Thu Jan 28 00:35:40 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1769 * write.h [BFD_ASSEMBLER]: Don't declare next_object_file_charP,
1770 *_fix_root, *_fix_tail, seg_fix_rootP, seg_fix_tailP.
1771 (struct fix): Reordered fields for compactness and efficiency.
1772 Converted some logical fields to 1-bit fields.
1774 * config/obj-aout.h: Use PARAMS.
1775 [BFD_ASSEMBLER]: Don't define/declare AOUT_MACHTYPE, seg_N_TYPE,
1776 N_TYPE_seg, DEFAULT_MAGIC_NUMBER_FOR_OBJECT_FILE.
1778 * read.c: Don't include listing.h; as.h includes it. Removed
1780 [BFD_ASSEMBLER]: Include subsegs.h.
1781 (old_buffer, new_broken_words): Default initialization is
1784 * output-file.c [BFD_ASSEMBLER]: Include bfd.h, default TARGET_MACH
1785 to 0, define stdoutput.
1786 (output_file_create) [BFD_ASSEMBLER]: Call bfd_perror on failure.
1787 Call bfd_set_arch_mach.
1788 (output_file_close) [BFD_ASSEMBLER]: Call bfd_close, not
1789 bfd_close_all_done. Call bfd_perror on failure.
1790 (output_file_append) [BFD_ASSEMBLER]: Don't define.
1792 * config/m68kcoff.mt (LOCAL_LOADLIBES): Delete definition.
1794 * subsegs.h (segment_info_type): Always define. Omit field scnhdr
1795 if not MANY_SEGMENTS. Define new field bfd_section if
1797 (seg_info): New macro.
1799 * expr.c, input-scrub.c: Use PARAMS macro. Deleted unused
1800 variables, and some irrelevant comments.
1802 * Makefile.in (ALL_CFLAGS): Include $(BFDDEF).
1803 (LIBS): Include $(BFDLIB). Don't bother with $(CLIB).
1804 * configure.in: Permit --with-bfd-assembler now, with a warning.
1805 Variable need_bfd is now a boolean, as is new variable bfd_gas.
1806 Set BFDDEF and BFDLIB in Makefile when appropriate.
1808 * as.c: Removed "#ifdef DONTDEF" and "#ifdef comment" code.
1809 (main): Refer to flag_always_generate_output instead of
1812 * as.c (main) [BFD_ASSEMBLER]: Open output bfd.
1813 (*_section) [BFD_ASSEMBLER]: Define them.
1814 (perform_an_assembly_pass) [BFD_ASSEMBLER]: Initialize them, and
1815 set section flags when appropriate.
1816 * as.h (SEG_NORMAL) [BFD_ASSEMBLER]: Require that the specified
1817 section is not absolute, undefined, or an assembler internal one.
1818 (absolute_section, undefined_section): Always define.
1819 * expr.c, read.c, symbols.c: Refer to *_section, not SEG_*; break
1820 switch statements into if-else trees.
1821 * symbols.c [MANY_SEGMENTS]: Deleted redundant definitions of
1822 SEG_BSS and SEG_DATA.
1824 * as.h (frag_now_fix): New macro.
1825 * symbols.c (colon): Use it.
1827 Wed Jan 27 21:43:53 PST 1993 Ralph Campbell (ralphc@pyramid.com)
1829 * config/tc-mips.c: Added mips support for mips-dec-bsd.
1830 * config/tc-mips.h: Added mips support for mips-dec-bsd.
1831 * config/ho-mipsbsd.h: Added mips support for mips-dec-bsd.
1832 * config/mips-opcode.h: Added mips support for mips-dec-bsd.
1833 * configure.in: Added mips support for mips-dec-bsd.
1834 * atof-generic.c: Define TRUE and FALSE if not defined.
1836 Thu Jan 21 12:48:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1838 * version.c: Bumped version number to 1.93.05.
1840 Wed Jan 20 17:11:53 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1842 * config/obj-coff.c (obj_emit_relocations): Don't use #elif.
1843 (obj_emit_lineno): Don't need return at end of void function.
1844 (obj_symbol_new_hook): Ditto.
1846 * config/tc-m68k.c: Removed some unused code.
1847 (tc_aout_fix_to_chars): Array nbytes_r_length is now const.
1849 * config/tc-m68k.h (TC_COUNT_RELOC): Don't emit reloc if only
1850 offset field is set.
1852 Fri Jan 8 05:44:49 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1854 * config/tc-sparc.c (architecture_requested, warn_on_bump,
1855 md_relax_table): Use default zero initialization.
1856 (s_reserve): Since SEG_E2 is equivalent to SEG_BSS, just use the
1857 latter, instead of selecting with preprocessor conditionals.
1859 Thu Jan 7 08:58:21 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1861 * configure.in: recognise all sparclite variants
1863 Thu Jan 7 05:25:25 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1865 * read.c (s_data) [!BFD_ASSEMBLER]: Fix typo in 4 Jan change --
1866 accidentally changed to use subseg_change where it should have
1869 Tue Jan 5 08:42:16 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1871 * expr.c (operand): If character other than comma or newline is a
1872 logical end-of-line character, use the newline case.
1873 From Eric Youngdale:
1874 (operand): Set X_add_number field for floating-point numbers.
1875 (operand): Treat zero byte as end-of-operand.
1877 * configure.in (per-target): Look for with_bfd_assembler option.
1878 For now, only accept "no", until the merge is done.
1880 Merged changes from Eric Youngdale (youngdale@v6550c.nrl.navy.mil):
1881 * as.c, flonum-konst.c, hex-value.c, input-file.c, version.c,
1882 config/obj-aout.h, config/obj-vms.c: VMS -> HO_VMS.
1883 * read.c: Finish conversion to S_* macros in the VMS only
1884 parts of the program. Add "const" modifier to hex_value.
1885 * as.c, read.c, symbols.c, write.c: Change "ifdef VMS" to
1887 * expr.c: Add "const" modifier to hex_value.
1888 * symbols.c: Finish conversion to S_* macros in the VMS only
1889 parts of the program. Add "const" modifier to
1890 md_[long,short]_jump_size. Remove declaration of const_flag
1891 (which will be declared in obj-vms.h).
1892 * write.c: Add "const" modifier to md_[long,short]_jump_size.
1893 Fix arguments to VMS_write_object_file.
1894 * config-gas.com: New file. Script for VMS systems to set up the
1895 configuration to build gas for VMS, and create config.status.
1896 * make-gas.com: Redone to work with new scheme.
1897 * obj-vms.c: Patch to fix bug where we were not correctly parsing the
1899 * obj-vms.c: Define macros COPY_LONG and COPY_SHORT which
1900 will swap bytes if needed on a big endian system. Use throughout
1902 * obj-vms.c (obj_aout_stab): Add code to generate listing file.
1903 * obj-vms.c (VMS_typedef_parse): Add alias to correctly handle certain
1904 types of malformed stabs. Change parsing algorithm so that we are
1905 more certain of having all of the information that we need on hand.
1906 * obj-vms.c (final_forward_reference): New function, used to help
1907 resolve the data types of as many struct elements as possible
1908 when some part of the struct is not fully defined by the compiler.
1909 * obj-vms.c (VMS_LSYM_Parse): Correctly handle case of continuation
1911 * obj-vms.c (VMS_write_object_file): Define all vtable psects
1912 as symbols as well in the object file. Look for external functions
1913 that start with "__vt.", and turn them into variables, since the
1914 g++ compiler is incapable of doing this.
1915 * tc-vax.c: Add '1' option for backward compatibility with older GCC
1917 * bignum-copy.c (bignum_copy): Fix bug where we pad with zeroes.
1918 * input-scrub.c (as_where): Fix bug where as would crash if we did not
1919 have the name of the source file yet.
1920 * config/ho-vms.h: define HO_VMS, not HO_VAX.
1922 Mon Jan 4 05:17:26 1993 Ken Raeburn (raeburn@cygnus.com)
1924 * read.c (s_data): Always use "data_section", since it'll map to
1925 SEG_DATA or SEG_E1 if needed.
1926 (s_lcomm): Likewise with bss_section.
1927 (s_fill): Use memset, not bzero.
1929 Thu Dec 31 04:29:27 1992 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1931 * read.c: Deleted some code under "#ifdef DONTDEF" that was for
1932 handling GDB symbol table data.
1934 * config/obj-aout.h (segment_name): Delete definition.
1935 (seg_name): Delete declaration.
1936 * config/obj-bout.h (segment_name, seg_name): Ditto.
1937 * config/obj-vms.h (segment_name, seg_name): Ditto.
1938 * config/obj-coff.h (segment_name): Ditto.
1939 * config/obj-coffbfd.h (segment_name): Ditto.
1941 * Changes for BFD_ASSEMBLER:
1942 * obj.h (obj_crawl_symbol_chain): Declare only if not
1944 (obj_header_append, obj_pre_write_hook): Ditto.
1945 * as.h (stdoutput): New var, defined only if BFD_ASSEMBLER.
1946 (segT) [BFD_ASSEMBLER]: New typedef for "asection *".
1947 (segment_name) If BFD_ASSEMBLER, look up BFD section name;
1948 otherwise, use seg_name array.
1949 (seg_name): Declare only if not BFD_ASSEMBLER.
1950 (section_alignment): Declare only if not BFD_ASSEMBLER.
1951 (big_section, reg_section, pass1_section, diff_section,
1952 absent_section, text_section, data_section, bss_section): If
1953 BFD_ASSEMBLER, declare as variables; otherwise, declare as macros,
1954 mapping to segT enum values.
1955 (tc_aout_fix_to_chars, next_object_file_charP): Force parse errors
1956 if these are used or defined, if BFD_ASSEMBLER.
1957 (subseg_set, subseg_new) [BFD_ASSEMBLER]: Functionality of old
1958 subseg_new split into two functions.
1959 (SEG_NORMAL): For BFD_ASSEMBLER, always return true, for now.
1961 * as.h (volatile): Don't define if already defined.
1962 (had_errors, had_warnings): Provide prototypes for ANSI C even if
1964 (as_bad, as_fatal, as_tsktsk, as_warn): For GNU C version 2,
1965 declare with format attribute for -Wformat checking.
1967 Wed Dec 30 10:18:57 1992 Ian Lance Taylor (ian@cygnus.com)
1969 * app.c, config/tc-*.c: Don't include read.h, since it is already
1972 * These are based on patches from Minh Tran-le
1973 <mtranle@paris.intellicorp.com>.
1974 * configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
1975 obj_format coffbfd and gas_target i386coff for target.
1976 (i[34]86-*-isc*): New host (uses sysv).
1977 * config/i386aix.mt: Removed (no longer used).
1978 * config/mh-i386aix (RANLIB): Use true rather than /bin/true.
1980 (LDFLAGS): Added, defined as -shlib.
1981 * config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
1982 * config/te-sco386.h (LOCAL_LABEL): Don't define.
1983 (DOT_LABEL_PREFIX): Define.
1984 * expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
1985 name rather than L0\001.
1986 * read.c (s_lcomm): Make a frag in SEG_BSS rather than using
1988 * symbols.c, symbols.h (local_bss_counter): Removed.
1989 * write.c (write_object_file): bss no longer uses
1990 local_bss_counter. Pass correct data and bss size to
1991 VMS_write_object_file.
1992 * config/obj-vms.c (VMS_write_object_file): Accept bss size as
1993 argument, rather than using local_bss_counter.
1994 * config/tc-m88k.c (s_bss): Don't use local_bss_counter.
1995 * config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
1996 * config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
1997 (size_section): Restored sanity check.
1998 (do_relocs_for): Base section address on s_paddr rather than
1999 computing it. Adjust a29k R_IHIHALF special case to account for
2000 section paddr (used to require paddr to be zero). If there are no
2001 reclos, set s_relptr to 0. Set relocation size in object_headers.
2002 (fill_section): Always set s_vaddr here, removing
2003 ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
2004 NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
2005 Set STYP_INFO for .comment.
2006 (coff_header_append): Use object headers and H_{SET,GET}_* macros.
2007 Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
2008 (crawl_symbols): Handle 8 character section name correctly. Use
2009 H_{SET,GET}_* macros.
2010 (do_linenos_for): Set lineno size in object_headers.
2011 (write_object_file): Use H_{SET,GET}_* macros. Don't bother to
2012 set s_vaddr here. If string_byte_count remains 4, set it back to
2013 0, and only write strings out if there are some. Call
2014 fill_section before do_relocs_for and do_linenos_for.
2015 (obj_coff_section): Handle optional quoted second argument giving
2016 section characteristics.
2017 (obj_coff_bss): Added to handle .bss.
2018 (obj_coff_ident): Added to handle .ident (puts string in .comment
2020 (obj_coff_lcomm): Put common symbols in .bss, not .data.
2021 (fixup_mdeps): Change to segment. Call frag_wane after
2023 (fixup_segment): Explicitly check S_IS_COMMON before making 386
2024 adjustment (already happened only for common symbols, but this is
2026 * config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
2027 * config/tc-i386.c (s_bss): Don't use if I386COFF.
2028 (md_pseudo_table): Ignore .optim and .noopt.
2029 (tc_coff_sizemachdep): New function.
2030 * config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
2032 (LOCAL_LABEL): Removed definition.
2033 (DOT_LABEL_PREFIX): Defined.
2035 Mon Dec 28 10:32:05 1992 Ken Raeburn (raeburn@cygnus.com)
2037 * app.c (app_push): Use memcpy, not bcopy.
2038 (do_scrub_next_char): For \", return " not '.
2039 (symbol_chars): Now const.
2041 * expr.c (operand): If not LOCAL_LABELS_FB, don't look for "0f"
2042 and "0b". If LOCAL_LABELS_DOLLAR, check for "0$".
2044 * config/obj-coff.h: Don't use #elif.
2046 * config/ho-sunos.h: Don't include sys/stdtypes.h; 4.0.3 doesn't
2047 have it. (Reported by Noah Friedman, friedman@gnu.ai.mit.edu.)
2049 Wed Dec 16 12:12:33 1992 Ian Lance Taylor (ian@cygnus.com)
2051 * write.c, obj-ieee.c: don't define SUB_SEGMENT_ALIGN if it is
2054 Tue Dec 15 12:40:11 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2056 * app.c (do_scrub_begin): allow single quote strings if so
2059 * config/*z8k*: checkpoint
2061 Sun Dec 13 00:04:38 1992 Ian Lance Taylor (ian@cygnus.com)
2063 * read.c (read_a_source_file): avoid calling xmalloc (0).
2065 Sat Dec 12 15:26:34 1992 Ian Lance Taylor (ian@cygnus.com)
2067 * listing.c: Call xmalloc, not malloc; don't declare malloc.
2069 * Changes to support SCO 3.2v4:
2070 * read.c (s_align_bytes, s_align_ptwo): If not SEG_DATA or
2071 SEG_BSS, fill with NOP_OPCODE.
2072 * config/i386coff.mt: Add opcode/i386.h to TARG_CPU_DEPENDENTS.
2073 * config/obj-coffbfd.c (do_relocs_for): Increment addr even if not
2074 using ZERO_BASED_SEGMENTS.
2075 (fill_section): If ZERO_BASED_SEGMENTS, set segment addresses, but
2076 never set segment address for SEG_E2 (.bss) and don't write out
2077 SEG_E2 contents. Set .init and .fini sections to STYP_TEXT.
2078 (obj_coff_endef): Don't merge labels or symbols awaiting forward
2079 definitions, and don't merge tags with non-tags. Check for .bf
2080 rather than just checking whether the second character is b and
2081 the third character is f.
2082 (obj_coff_val): gcc can generate values which we don't handle
2083 correctly; discard information for now, since it only affects the
2084 debugging information.
2085 (tag_find_or_name): Don't insert tags in the symbol table.
2086 (yank_symbols): Don't merge labels.
2087 (write_object_file): Don't define SUB_SEGMENT_ALIGN if it is
2088 already defined. Fill subsegments with NOP_OPCODE, not 0. Don't
2089 set segment address if ZERO_BASED_SEGMENTS.
2090 (obj_coff_section): Accept and ignore a trailing quoted string, as
2091 used in AT&T i386 syntax.
2092 (fixup_segment): Take segment as argument. On the i386, adjust PC
2093 relative addends by the segment vaddr.
2094 * tc-i386.h: Define SUB_SEGMENT_ALIGN.
2095 * tc-a29k.h: Define ZERO_BASED_SEGMENTS.
2096 * tc-i386.c: (i386_operand): If I386COFF, accept any segment type.
2098 Tue Dec 8 00:06:48 1992 Ken Raeburn (raeburn@rtl.cygnus.com)
2100 * config/obj-coffbfd.c: Include libcoff.h.
2102 * version.c: Now version 1.93.
2104 Mon Dec 7 00:39:09 1992 Ken Raeburn (raeburn@cygnus.com)
2106 * config/tc-i386.c (md_pseudo_table): For 386bsd and linux, do
2107 power-of-two alignment for .align.
2109 * as.h: If BROKEN_ASSERT, just redefine `assert' to be trivial,
2110 and leave everything else alone.
2112 Fri Dec 4 16:58:42 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2114 * Makefile.in (as.new): Don't bother saving as.old.
2116 * write.c: Conditionalize on OBJ_VMS, not VMS.
2117 (magic_number_for_object_file): Don't define if OBJ_VMS.
2119 * config/obj-vms.c: Changes for traditional C.
2121 Thu Dec 3 01:24:07 1992 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2123 * config/ho-generic.h (malloc, realloc): Declare.
2125 * Lots of comment/whitespace changes.
2127 * write.h (struct fix): Some fields reordered, narrowed.
2129 * read.c (MASK_CHAR): Define using C types, not magic number.
2131 * as.c, input-file.c: Deleted some unused code.
2133 * app.c, as.h: Doc fix.
2135 * flonum-konst.c, flonum-mult.c: Include ansidecl.h.
2137 * as.h (xmalloc): Argument is long.
2139 * xmalloc.c (error): Remove declaration; as.h takes care of it.
2141 * doc/as.texinfo: Regrouped documentation of some command-line
2142 options. Updated options documentation for m68k. Some minor
2143 wording/punctuation changes.
2145 Mon Nov 30 11:42:11 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2147 * configure.in: Accept target OS "vms".
2149 * symbols.c: Merged ANSI and non-ANSI function decls, using
2152 * xmalloc.c: Just include as.h, don't bother trying to figure out
2155 * strstr.c, strerror.c: Deleted.
2156 * Makefile.in: Deleted references.
2158 * config/tc-ns32k.c: Don't include header file for string
2159 declarations; leave that to ho-*.h.
2161 Fri Nov 27 04:11:36 1992 Ken Raeburn (raeburn at cambridge-laptop.cygnus.com)
2163 * config/coff_gnu.h [TC_I860]: Guesses for reloc type values,
2164 imported from FSF sources.
2166 * messages.c (strerror): Declare unconditionally.
2168 * as.h: Delete alloca and register definitions.
2170 * config/atof-ieee.c (mask): Now const.
2172 * obstack.c, obstack.h: Deleted.
2174 * as.h (flag_readonly_data_in_text): New flag.
2175 * as.c (main): Set it for -R.
2177 * as.h (flag_suppress_warnings): New flag.
2178 * as.c (main): Set it for -W.
2179 * messages.c (as_warn): Check it instead of flagseen['W'].
2181 * as.h (flag_always_generate_output): New flag.
2182 * as.c (main): Set it for -Z.
2184 * config/tc-sparc.h: Define NEED_FX_R_TYPE.
2185 * config/tc-a29k.h: Ditto.
2186 * write.h (struct fix): Don't conditionalize fx_r_type field on TC
2189 * as.h: Merged ANSI and non-ANSI function decls, using PARAMS
2191 * bignum.h, expr.h, flonum.h, frags.h, input-file.h, listing.h,
2192 obj.h, output-file.h, read.h, struc-symbol.h, symbols.h, tc.h,
2196 * xmalloc.c: Conditionalize on HAVE_MALLOC_H, not USG. Fold in
2197 xrealloc from xrealloc.c.
2198 * xrealloc.c: Deleted.
2199 * Makefile.in (REAL_SOURCES, OBJS): Adjusted.
2201 * configure.in: For host CPU a29k, rs6000, vax, consider using bsd
2204 * config/ho-sysv.h (setbuffer, HO_USG): Deleted.
2206 * config/atof-ieee.c (atof_ieee): Exponent field isn't a pointer;
2207 don't initialize it with NULL.
2209 * config/ho-vax.h (M_VAX): Deleted; was unused.
2211 * README-vms, config/ho-vms.h, config/obj-vms.c, config/obj-vms.h:
2212 New files imported from FSF version, contributed by Eric Youngdale.
2213 * README-vms-dbg, config/vms: Deleted.
2215 * ChangeLog, config/ChangeLog: Merged.
2217 * config/*tahoe*, configure.in: Tahoe support brought in from FSF
2220 * input-file.c (input_file_open): Eliminate call to setvbuf.
2221 [USG] (setbuffer): Deleted macro.
2223 Mon Nov 23 11:00:16 1992 Ken Raeburn (raeburn@cygnus.com)
2225 * all files: Whitespace changes for GNU indentation style, done by
2226 GNU `indent'. Some cleanup still needed, especially of comments.
2228 * configure.in: No te-386bsd.h file exists; don't try to use it.
2230 * obj-coff.c (obj_coff_endef): Use as_warn, not fprintf.
2232 * tc-m68k.c (md_assemble): Don't complain about 68000 with 68881;
2233 could be doing emulation.
2235 Thu Nov 19 11:47:19 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2238 * doc/Makefile.in, doc/all.m4, doc/as-all.texinfo, doc/as.texinfo:
2241 Tue Nov 10 09:49:24 1992 Ian Lance Taylor (ian@cygnus.com)
2243 * Makefile.in (as.o, obj-format.o): added dependency on subsegs.h.
2245 * subsegs.h: add extern to segment_info declaration.
2247 * read.h: added extern declarations for comment_chars,
2248 line_comment_chars, and line_separator_chars.
2249 read.c, app.c: removed definitions of comment_chars,
2250 line_comment_chars, and line_separator_chars.
2252 * tc-m68k.c (m68k_reg_parse): If REGISTER_PREFIX isn't defined,
2253 still accept (but don't require) OPTIONAL_REGISTER_PREFIX before
2255 (insert_reg): put REGISTER_PREFIX before register names before
2256 putting them in the symbol table.
2257 * tc-m68k.h (OPTIONAL_REGISTER_PREFIX): Define to be "%", if not
2260 * obj-coffbfd.c (fill_section): set STYP_NOLOAD bit for .bss
2263 * atof-ieee.c, atof-ns32k.c, tc-*.c: made EXP_CHARS, FLT_CHARS,
2264 comment_chars, line_comment_chars and line_seperator_chars
2265 consistently const, and always initialized them. Included read.h.
2267 Thu Nov 5 17:55:41 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
2269 * tc-sparc.c (sparc_ip): Add code to flag error if an absolute
2270 constant will not fit in an immediate field.
2271 (md_apply_fix, RELOC_BASE13 case): Check for relocation overflow.
2273 Wed Nov 4 07:50:46 1992 Ken Raeburn (raeburn@cygnus.com)
2275 * obj-coff.c (callj_table): Delete global variable.
2276 (obj_emit_relocations): Define it locally here, and only if
2279 * tc-m68k.c (m68k_reg_parse): Underscore is part of a symbol name.
2280 (m68k_ip): Don't warn about bignum used as float bit-pattern.
2282 * obj-coff.c: Replaced ANSI and non-ANSI function declarations
2283 with a single set using PARAMS macro.
2285 * tc-i960.c (tc_bout_fix_to_chars): Bit-field fixups want a length
2288 * tc-i960.c: Missed a couple of 0->NO_RELOC conversions.
2290 * tc-i960.h (N_BALNAME, N_CALLNAME): Define as char-type values,
2291 so widening works consistently.
2293 Wed Oct 28 08:52:34 1992 Ken Raeburn (raeburn@cygnus.com)
2295 * version.c: Put conditional "const" before version_string, not
2296 before dummy function for VMS. Now version 1.91.03.
2298 * app.c (do_scrub_next_char): Need double-\ before `000' to show
2299 printed rep of null character.
2301 Fri Oct 23 14:40:38 1992 Ian Lance Taylor (ian@cygnus.com)
2303 * obj-coffbfd.c (write_object_file): check return value of
2306 Tue Oct 20 12:18:08 1992 Ian Lance Taylor (ian@cygnus.com)
2308 * Support for i386-sysv.
2309 obj-coffbfd.c (do_relocs_for, write_object_file): set segment
2310 addresses to reasonable sizes. New define ZERO_BASED_SEGMENTS can
2311 be used to set them all to zero as was done before.
2312 (fill_section): segment addresses now set in write_object_file.
2313 (fill_section): Don't set STYP_NOLOAD for .bss section.
2314 (fixup_segment): 386 uses strange common symbol format.
2315 tc-i386.c (tc_coff_fix2rtype): use R_DIR32, not R_RELLONG, for
2316 compatibility with SVR3.2 linker.
2317 * configure.in: i386-sysv and i386-sco use coffbfd.
2319 * app.c (do_scrub_next_char): discard whitespace after a label.
2321 Sat Oct 10 12:33:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2323 * configure.in: differentiate between SunOS 4 and Solaris2 for Sun4
2324 hosts, use the sysv configuration for solaris2
2326 Mon Oct 5 09:28:57 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2328 fix i960+non-bfd coff bit rot.
2329 * obj-coff.c (c_dot_file_symbol, obj_coff_ln, obj_coff_line):
2330 support for C source listings. (obj_coff_endef): look in the right
2331 part of the symbol for the symbol name
2333 * tc-m68k.c (get_num): make it work for all segments, not just the
2336 Mon Oct 5 03:30:36 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
2338 * configure.in: recognize i386-*-bsd emulation.
2340 Thu Oct 1 23:05:12 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2342 * configure.in: use the cpu-vendor-os triple for host and target
2344 Tue Sep 29 12:22:52 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2346 * obj-coffbfd.c (write_object_file): don't fixup for the z8k
2347 * tc-z8k.c: lots of bug fixes
2349 Tue Sep 29 10:51:55 1992 Ian Lance Taylor (ian@cygnus.com)
2351 * tc-i960.h, tc-i960.c: avoid the ANSI preprocessor addition
2352 #elif, since it is not supported by old compilers.
2353 ho-rs6000.h, tc-m68k.c: the native RS/6000 compiler miscompiles a
2354 couple of expressions in tc-m68k.c.
2356 Mon Sep 28 21:18:24 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2358 * read.c (cons): If NO_RELOC is defined, use it.
2360 * tc-i960.c (get_cdisp): Use NO_RELOC, not 0, in call to fix_new.
2362 Fri Sep 25 18:18:52 1992 Ian Lance Taylor (ian@cygnus.com)
2364 * tc-m68k.h: if M68KCOFF, define DOT_LABEL_PREFIX (to require
2365 local labels to start with a .) and set REGISTER_PREFIX to %.
2366 tc-m68k.c (m68k_reg_parse): accept REGISTER_PREFIX if defined.
2368 Fri Sep 25 17:53:43 1992 John Gilmore (gnu@cygnus.com)
2370 * messages.c: Comment changes.
2372 Fri Sep 25 14:12:58 1992 Ken Raeburn (raeburn@kyriath.cygnus.com)
2374 * as.h: Test if __STDC__ is defined only, don't test its value.
2375 * messages.c: If __STDC__ is not defined, define NO_STDARG.
2377 Thu Sep 24 12:42:32 1992 Brendan Kehoe (brendan@rtl.cygnus.com)
2379 * listing.c (debugging_pseudo): Add stabs and stabn as things to
2382 Tue Sep 22 13:02:07 1992 Sean Eric Fagan (sef@cygnus.com)
2384 * obj-coffbfd.c (do_relocs_for,fill_section): now allocate all
2385 sections starting from zero, rather than making them consecutive.
2386 This makes subsequent reloc calculations easier, esp if the object
2387 format doesn't understand addends. (obj_coff_lcomm): (maybe temporarily)
2388 allocate lcomm in .data rather than in .bss. It seems that some
2389 tools can't cope with a non-zero sized bss before linkage.
2391 Tue Sep 22 15:10:51 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2393 * tc-m68k.c: Replace "enum m68k_architecture" with "int"
2394 throughout. That enum no longer means what we thought it meant.
2396 * tc-m68k.c (md_assemble, md_parse_option): Handle new
2397 "-mno-688[58]1" options.
2399 * tc-m68k.c: Added CPU32 support.
2401 Fri Sep 18 08:02:18 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2403 * tc-m68k.c (m68k_ip): An(disp) is not pc relative.
2405 Tue Sep 15 17:25:05 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
2407 * Makefile.in (as.new): Remove dependence on LOCAL_LOADLIBES.
2408 Change LIBDEPS dependence to LIBS.
2410 Tue Sep 15 15:32:02 1992 Ian Lance Taylor (ian@cygnus.com)
2412 * Makefile.in (install): if $(tooldir) exists, install as in
2415 Sun Sep 13 20:30:10 1992 Ian Lance Taylor (ian@cygnus.com)
2417 * Added WARN_SIGNED_OVERFLOW_WORD define to give an error if any
2418 .word is < -32768 or > 32767. The -J flag causes the error to be
2419 ignored. This is to catch over-sized switches generated by gcc on
2420 systems which don't support the broken .word hack.
2421 as.c (main): permit -J if WARN_SIGNED_OVERFLOW_WORD.
2422 write.c (fixup_segment): check for signed .word overflow if
2423 WARN_SIGNED_OVERFLOW_WORD.
2425 * write.c (fixup_segment): fixed missing parens in expression
2426 checking for byte or word overflow.
2428 * obj-coffbfd.h: define WARN_SIGNED_OVERFLOW_WORD.
2429 obj-coffbfd.c (fixup_segment): check for signed .word overflow if
2430 WARN_SIGNED_OVERFLOW_WORD.
2432 * obj-coffbfd.c (fixup_segment): fixed missing parens in
2433 expression checking for byte or word overflow.
2435 Fri Sep 11 10:21:04 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2437 Support for i386 coff
2438 * obj-coffbfd.h : added stuff
2439 * tc-i386.c (tc_coff_fix2rtype): new function
2440 * tc-i386.h : new coff defines
2442 Thu Sep 10 09:23:15 1992 Ian Lance Taylor (ian@cygnus.com)
2444 * input-scrub.c (input_scrub_push): call input_file_begin, not
2446 messages.c (as_perror): print ": " between the passed in error and
2447 the strerror, like perror does.
2449 Wed Sep 9 11:06:25 1992 Ian Lance Taylor (ian@cygnus.com)
2451 * Makefile.in: use gas_target instead of modifying target_cpu.
2452 From Steve Chamberlain:
2453 Makefile.in: Handle m68*-*-coff*.
2454 read.c, read.h: add mult argument to s_space
2456 * tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
2457 Motorola and MIT syntax; gas can now assemble either type of
2459 tc-m68kmote.c, tc-m68kmote.h: removed now superfluous files.
2460 From Steve Chamberlain:
2461 m68kcoff.mt: for m68k COFF.
2462 obj-coffbfd.c: (fixup_mdeps) added
2463 (size_section) removed bad sanity check
2464 (fill_section) added rs_machine_dependent case
2465 (write_object_file) call fixup_mdeps
2466 (fixup_segment) set fx_subsy to 0.
2467 obj-coffbfd.h: define WORKING_DOT_WORD (too hard to support) and
2469 tc-m68k.c, config/tc-m68k.h: added m68k COFF support and Motorala
2472 Tue Sep 8 17:10:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2474 * Makefile.in (LIBS): Include opcode library.
2476 Fri Sep 4 18:20:56 1992 Ken Raeburn (raeburn@cygnus.com)
2478 * config/tc-m68k.c (get_num, case SEG_BIG): If only small integers
2479 including zero are accepted, pass +0.0.
2481 Sun Aug 30 21:24:46 1992 Ian Lance Taylor (ian@cygnus.com)
2483 * Makefile.in: map "as" through program_transform_name when
2486 * doc/Makefile.in: map "as" through program_transform_name when
2489 Sat Aug 29 12:11:12 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
2491 * Makefile.in (as.new): Depend on LOCAL_LOADLIBES.
2493 Fri Aug 28 16:25:22 1992 Ian Lance Taylor (ian@cygnus.com)
2495 * obj-bout.h, obj-bout.c (obj_header_append, obj_symbol_to_chars),
2496 tc-i960.c (md_ri_to_chars): Always output bout object file in
2497 little endian byte order (used to use endianness of host).
2499 Tue Aug 25 15:50:48 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2501 * config/tc-m68k.c (init_table): Now const. Always include 68851
2502 data, so that "bc" is available to 68040 cache instructions.
2503 Added "tt0", "tt1", and 68ec030 variants.
2504 (md_assemble): Complain if 68000 (only) and 68881 are specified.
2505 (enum _register): Added TT0, TT1.
2506 (m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
2507 line number correctly in "internal error" messages. Don't print
2508 architecture-mismatch message for operand errors.
2510 From Colin Smith (colin@wrs.com):
2511 * config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather
2512 than install_operand.
2514 Tue Aug 25 15:13:48 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2516 * listing.c (buffer_line): rewind to the start of include
2517 files, they might be included twice.
2519 * z8k.c, z8k.h, z8k.mt: z8000 support stuff
2521 Mon Aug 24 12:45:43 1992 Ian Lance Taylor (ian@cygnus.com)
2523 * Makefile.in: defined TARGET_CPU for C code so that it can choose
2524 one element of a family.
2526 * tc-m68k.c: use TARGET_CPU to choose default cpu type.
2528 * te-generic.h: default to LOCAL_LABELS_DOLLAR and LOCAL_LABELS_FB
2529 so that we can assemble hand-written libgcc code.
2531 Fri Aug 21 14:38:44 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2533 * messages.c (as_warn): Use fputs, not fprintf, with a buffer that
2534 has already been formatted (but may still contain %-characters).
2537 Wed Aug 19 11:20:59 1992 Ian Lance Taylor (ian@cygnus.com)
2539 * tc-m68k.c, tc-m68kmote.c: the cas2 instruction is supposed to be
2540 written with indirection on the last two operands, which can be
2541 either data or address registers. Added a new operand type 'r'
2542 which accepts either register type. Added '(' to notend stuff in
2543 tc-m68kmote.c to accept (a0):(a2) in cas2 instruction.
2545 Wed Aug 19 09:25:09 1992 Ken Raeburn (raeburn@cygnus.com)
2547 * as.h (enum _relax_state): Start off at one, not zero, to better
2548 catch uninitialized-variable errors.
2549 (linkrelax): Declare new variable.
2551 * messages.c (warning_count, error_count): Default initializer is
2554 * write.c: Merged some declarations, using PARMS macro.
2555 (text_frag_root, data_frag_root, bss_frag_root, text_last_frag,
2556 data_last_frag): No longer static.
2557 (write_object_file, case rs_align or rs_org): If HANDLE_ALIGN is
2558 defined, call it. Change segments before calling fixup_segment.
2559 (relax_align): If linkrelax, provide extra padding.
2561 * obj-bout.c (obj_emit_relocations): Emit alignment relocs despite
2562 their not having symbols associated.
2564 * tc-i960.c (norelax, instrument_branches): Default initializer is
2566 (linkrelax): Delete variable definition.
2567 (mem_fmt): Call fix_new with NO_RELOC.
2568 (tc_bout_fix_to_chars): Handle alignment relocs.
2569 (i960_handle_align): New function.
2570 * tc-i960.h (linkrelax): Delete declaration.
2571 (HANDLE_ALIGN): New macro; calls i960_handle_align.
2572 (NEED_FX_R_TYPE, NO_RELOC): New macros.
2574 Tue Aug 18 14:59:21 1992 Ken Raeburn (raeburn@cygnus.com)
2576 * config/sparc.mt: New file. Grab sparc opcode table from bfd
2579 Tue Aug 18 14:16:38 1992 Ian Lance Taylor (ian@cygnus.com)
2581 * Makefile.in: always create installation directories. Removed
2582 MINUS_G, set CFLAGS to default to -g, added FLAGS_TO_PASS, passed
2583 FLAGS_TO_PASS to recursive makes.
2585 * doc/Makefile.in: always create installation directories.
2587 Mon Aug 17 15:09:56 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2589 * input-scrub.c (input_scrub_pop, input_scrub_push): memcpy was
2590 being used with args swapped, causing occasional lossage when
2591 refilling buffers after an include file.
2593 Mon Aug 17 13:18:51 1992 Ken Raeburn (raeburn@cygnus.com)
2595 * messages.c (as_tsktsk): Use correct ANSI form for stdarg
2596 version. Discard bogus DONTDEF version.
2597 (as_warn, as_bad, as_fatal): Likewise.
2599 Fri Aug 14 18:31:14 1992 Ken Raeburn (raeburn@cygnus.com)
2601 * config/tc-m68k.c (m68k_ip): If instruction is invalid for the
2602 selected architecture, print a message saying so and listing what
2603 processors support it, rather than saying "operands mismatch".
2605 Thu Aug 13 13:53:19 1992 Ken Raeburn (raeburn@cygnus.com)
2607 * as.h [BROKEN_ASSERT]: If defined, turn off all assertion checks.
2609 * config/ho-rs6000.h (M_RS6000): Don't define it.
2611 (BROKEN_ASSERT): Define it if not __STDC__.
2613 Tue Aug 11 12:58:14 1992 Ken Raeburn (raeburn@cygnus.com)
2615 * sparc.mt: New file.
2617 Mon Aug 10 14:37:08 1992 Per Bothner (bothner@cygnus.com)
2619 * tc-m68k.c: ".align N" means align to N-byte boundary *only*
2620 if TN_SUN3; otherwise align to 2**N-byte bounary.
2622 Thu Aug 6 12:10:39 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2624 * read.c (s_fill): make the .fill size clamped error a warn and
2625 fix bug where 0's were always placed.
2627 * config/tc-h8300.c: if a :8 is seen after an operand, fill top
2628 two bytes of any constant with 0xff:
2630 Wed Aug 5 12:02:40 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2632 * config/tc-m68k.c (md_pseudo_table): fix the .align thing
2633 the right way; for just the 68k. Sun 3 .align is nbytes, not ptwo.
2635 Wed Aug 5 01:54:34 1992 John Gilmore (gnu at cygnus.com)
2637 * tc-m68k.c (try_index): Error if index scaling specified and
2638 assembling for an older CPU than a 68020.
2640 Sat Aug 1 19:10:13 1992 Ken Raeburn (raeburn@cygnus.com)
2642 * config/tc-sparc.c (tc_aout_fix_to_chars): If pc-relative, take
2643 fx_offset into account.
2645 Fri Jul 31 21:53:28 1992 Ken Raeburn (raeburn@cygnus.com)
2647 * configure.in (mips host): Accept "ultrix" with version number.
2649 * expr.c (floating_constant): Separate "=-" to avoid confusing
2650 ancient or broken compilers.
2652 * config/tc-m68k.c (m68k_ip): Mismatch error could also indicate
2653 processor/opcode mismatch, so reword the error message.
2654 (md_assemble): If no CPU has been set (even if FPU/PMMU
2655 characteristics have been), default to 68020. Don't need extra
2656 quotes around error string.
2658 Fri Jul 31 12:26:34 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
2660 * read.c (potable): Revert sac's incorrect change made Jul 13.
2661 Align really is supposed to be ptwo not nbytes.
2663 Mon Jul 20 02:51:59 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
2665 * Makefile.in: _Do_ include libiberty. (from sef)
2667 Fri Jul 17 15:15:28 1992 Ken Raeburn (raeburn@cygnus.com)
2669 * expr.c (integer_constant): Handle "0f" and "0b" label references
2672 Thu Jul 16 08:20:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2674 * write.c (fixup_segment): if relaxing, don't do anything.
2675 * config/obj-bout.[ch] : maintain the a_relaxable file header info
2676 * config/tc-i960.c: new option -linkrelax
2678 Mon Jul 13 14:11:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2680 * expr.c (expr): allow SEG_BSS in expressions
2681 * read.c (potable): align should be nbytes, not ptwo!
2682 * write.c (write_object_file): extra glue for new bss attributes
2683 (relax_segment): SEG_BSS is ok now
2684 * config/tc-m68k.c (m68k_ip_op): can now parse more @( modes
2686 Mon Jul 6 17:09:32 1992 Steve Chamberlain (sac@cygnus.com)
2688 * obj-coffbfd.c (fill_section): mark .lit sections as STYP_LIT
2690 Mon Jun 1 16:20:22 1992 Michael Tiemann (tiemann@cygnus.com)
2692 * configure.in: recognize m680x0 as having sun3 emulation mode for
2693 vxworks environment.
2696 Tue Jun 30 20:25:54 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
2698 * Makefile.in: Add program_suffix (parallel to program_prefix)
2700 Wed Jun 24 10:57:54 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2702 * app.c (process_escape): new function to handle escapes the right
2703 way, (do_scrub_next_char): use new function
2704 * cond.c (s_ifdef): do ifdef/ifndef right
2705 * read.c (s_fill): make the , expressions optional like the doc
2707 * config/tc-h8300.[ch]: better warnings
2709 Tue Jun 9 07:54:54 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2711 * subsegs.c (subsegs_begin): create bss0_frchainP in the same was
2714 * write.c (write_object_file): various changes to handle data in
2715 the BSS segment in much the same was as stuff in the DATA segment.
2717 * tc-m68k.c (m68kip): Fix typo so that only arch's >=68020 do
2718 pcrel data stuff. (md_estimate_size_before_relax): when relaxing a
2719 68010 bxx into a bra+6 jmpxx, put the bytes of the jmp opcode into
2720 the right place. (s_bss): Don't put .bss stuff into SEG_DATA, put
2723 Thu Jun 4 11:59:13 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2725 * expr.c(expr): allow SEG_REGISTER in expressions.
2726 * read.c(pseudo_set): register expressions can be the source of a
2728 * subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
2729 goto SEG_TEXT (if a.out)
2730 * write.c (write_object_file): If a.out don't use the old way for
2732 * config/obj-a.out (s_sect): complain if the user tries to use a
2733 subsegment with a value which might interfere with out -R hackery.
2734 * config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
2735 rather than use ugly if tree. (init_regtable): insert register
2736 names into symbol table.
2738 Tue Jun 2 16:47:09 1992 Steve Chamberlain (sac@cygnus.com)
2740 * write.c (write_object_file): keep the fix_tail clean, which
2741 fixes a bug in -R where relocations were being lost.
2743 Mon Jun 1 16:20:22 1992 Michael Tiemann (tiemann@cygnus.com)
2745 * configure.in: recognize m680x0 as having sun3 emulation mode for
2746 vxworks environment.
2748 Sun May 31 05:33:00 1992 david d `zoo' zuhn (zoo@cygnus.com)
2750 * configure.in: recognize m680x0 as an m68k
2752 Thu May 28 11:22:02 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
2754 * configure.in: Recognize sparclite as a sparc variant.
2756 * tc-sparc.c: Use new ARCHITECTURES_CONFLICT_P macro. Mention new
2759 Tue May 26 16:47:56 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2761 * config/tc-a29k.c: lint
2762 * listing.c, expr.c: patches from Andrew Smith
2764 Thu May 14 17:22:48 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2766 * doc/Makefile.in: use m4 rather than gm4.
2768 Mon May 4 18:56:19 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2770 * obj-coffbfd.c: use is a synonym for section, (do_relocs_for):
2771 calc the base of relocs correctly.
2772 * tc-a29k.c (parse_operand): allow expressions to be in any section.
2774 Mon Apr 27 13:13:31 1992 K. Richard Pixley (rich@cygnus.com)
2776 * as.c, write.c: use -K rather than -k for the broken word warning
2779 Tue Apr 21 13:35:30 1992 K. Richard Pixley (rich@cygnus.com)
2781 * Makefile.in: do not print recursion lines.
2783 Wed Apr 15 21:19:31 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2785 * Makefile.in: the tooldir copy of gas goes directly in tooldir.
2787 Tue Apr 14 14:50:22 1992 Ken Raeburn (Raeburn@Cygnus.COM)
2789 * write.c (write_object_file): For b.out format, round up section
2790 start addresses to match required alignment.
2792 Thu Apr 9 05:45:29 1992 Ken Raeburn (Raeburn@Cygnus.COM)
2794 * Makefile.in (install): Install into $(tooldir)/bin, since that's
2795 where gcc looks for it.
2797 Tue Apr 7 15:12:15 1992 Sean Eric Fagan (sef@cygnus.com)
2799 * Makefile.in: Changed some lines to be less confusing for some
2802 * input-file.c: Conditionalize on _IOFBF, not VMS.
2804 * read.c, write.c: Change a series of ifdef/elif to
2805 ifdef/else/ifdef etc.
2807 Fri Mar 27 12:21:16 1992 K. Richard Pixley (rich@cygnus.com)
2809 * symbols.c (fb_label_init): fix sizeof to memset.
2811 Fri Mar 13 15:45:44 1992 K. Richard Pixley (rich@cygnus.com)
2813 * Makefile.in: install the man page.
2815 * Makefile.in: pass down MAKEINFO explicitly on info.
2817 * doc/Makefile.in: use $(MAKEINFO) not makeinfo.
2819 Fri Mar 13 08:03:03 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2821 * flonum-const.c: renamed flonum-konst.c to stop dos name
2824 Thu Mar 12 04:42:38 1992 K. Richard Pixley (rich@cygnus.com)
2826 * tc-m68k.h, te-sun3.h: moved LOCAL_LABELS_FB definition from
2827 tc-m68k.h to te-sun3.h.
2829 Wed Mar 11 23:32:42 1992 K. Richard Pixley (rich@cygnus.com)
2831 * configure.in: vxworks68 gets te-sun3.h.
2833 * expr.c: remove limitation that local_labels_dollar or
2834 local_labels_fb must be < 10.
2836 * symbols.c: remove local_labels_dollar, replace with a function
2837 interface for a sparse array. All users adjusted.
2839 * te-sun3.h: add LOCAL_LABELS_DOLLAR.
2841 Sat Mar 7 00:06:25 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2843 * doc/Makefile.in: commented out line for building as-all.texinfo.
2846 * doc/as.texinfo, doc/as-all.texinfo: added menu item hooks.
2848 Fri Mar 6 21:57:18 1992 K. Richard Pixley (rich@cygnus.com)
2850 * Makefile.in: added check target.
2852 Tue Mar 3 15:45:56 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2854 * Makefile.in: added tooldir and program_prefix.
2856 Sun Mar 1 04:43:19 1992 Michael Tiemann (tiemann@cygnus.com)
2858 * write.{c,h} (fix_new): Make these declarations consistent.
2860 Sat Feb 29 13:59:10 1992 Michael Tiemann (tiemann@cygnus.com)
2862 * Makefile.in (strerror.o): Add rule so that broken Sun make can
2865 Wed Feb 26 19:26:28 1992 Steve Chamberlain (sac at thepub.cygnus.com)
2867 * read.c, obj-coffbfd.c : fix h8300 specific bit rot
2869 * expr.c (operand): if can't work out what sort of operand it is,
2870 then look through FLT_CHARS for a hint.
2872 Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
2874 * Makefile.in, configure.in: removed traces of namesubdir,
2875 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
2876 copyrights to '92, changed some from Cygnus to FSF.
2878 * doc/Makefile.in, doc/configure.in: removed traces of namesubdir,
2879 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
2880 copyrights to '92, changed some from Cygnus to FSF.
2882 Tue Feb 25 14:17:15 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2884 * expr.c: If an expression is single comma, then return with
2885 SEG_ABSENT rather than an error - since the sparc front end does
2886 really strange things with things like fbge,a
2888 * as.h: include bfd.h if using many sections
2889 * expr.c: LOCAL_LABELS_FB had been changed to lower case - so
2890 local labels didn't work.
2891 * listing.c (list_symbol_table): don't core dump when there's no
2893 * write.c, write.h: call fix_new with the right number of args on
2895 * config/tc-h8300.[ch] : fix bugs reported by HMSI, and make
2898 Sat Feb 22 12:26:28 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2900 * app.c: MRI compatibility - allow single quote to start a string.
2901 * as.c: fix typo recently introduced.
2902 * as.h : Don't include aout/reloc.h - it's not right for COFF!
2903 * expr.c: Much rewriting, to accomodate MRI syntax for
2904 expressions. Also easier to read now.
2905 * listing.c: Put back defuns
2906 * read.c: modified to accept MRI syntax, put back listing pseudo
2907 ops so that an assembler built with NO_LISTING ignores list ops
2909 * write.c, write.h: fixs - only keep a reloc type in a fix if the target
2910 machine is a SPARC or a 29K.
2911 * config/obj-aout.c: added s_sect pseudo op
2912 * config/obj-coffbfd.c: lints, set the filehdr flags right and
2913 fill in the timestamp.
2914 * config/obj-coffbfd.h: Since we don't include aout/reloc.h
2915 anymore, define all the relocs which the tc-<x> bit will use so we
2916 can translate from them to the coff types.
2917 * config/tc-a29k.c: reloc_type isn't ane enum any more
2918 * config/tc-m68k.c: Added NO_RELOC definition.
2920 Fri Feb 21 06:21:07 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2922 * Makefile.in: put header files before C source for TAGS; remove
2923 references to non-existent syscalls.h.
2925 * read.c, write.c subsegs.c: back out the .bss changes.
2927 * obj-aout.c: do not include stab.gnu.h if NO_LISTING.
2929 * tc-i860.c, a.out.gnu.h: move i860 relocs to a proper place.
2933 Fri Feb 21 01:08:48 1992 Minh Tran-Le (TRANLE@INTELLICORP.COM)
2935 * symbols.c (local_label_name): symbols now start with ^A.
2937 * read.c, subsegs.c, write.c obj-coff.c: added handling of
2938 `.bss` pseudo op for unitialized data. The new gcc (1.37.9x)
2939 generate these sections. .align: will use NOP_OPCODE or 0
2940 for padding. This is just for being nice to the
2943 * expr.c (operand): changed to generate local label "\001L0"
2944 starting with a ^A so that it is recognized as a local label.
2946 * as.c (perform_an_assembly_pass): zero bss_fix_root, too.
2948 * tc-i386.c: tc-i386.c: added handling of the following opcodes:
2949 i/o opcodes - inb, inw, outb and outw. string manipulation with
2950 att syntax - scmp, slod, smov, ssca, ssto.
2952 * obj-coff.c: (for aix386) Moved the symbols .text, .data and .bss
2953 to just after .file .
2955 In obj_crawl_symbol_chain() where it tries to put the external
2956 symbols apart, with the condition:
2957 (!S_IS_DEFINED(symbolP) &&
2958 !S_IS_DEBUG(symbolP) &&
2959 !SF_GET_STATICS(symbolP))
2960 it was moving too many symbols out. So I switch it back to the
2962 (S_GET_STORAGE_CLASS(symbolP) == C_EXT && !SF_GET_FUNCTION(symbolP))
2964 In obj_emit_relocations() added the conditional on KEEP_RELOC_INFO
2965 so that we don't use the F_RELFLG which make the linker complain
2966 that somebody has stripped the relocation info.
2968 Also, the AIX ld program require that the relocation table
2969 is sorted by r_vaddr like the standard ATT assembler does.
2971 [he also changed the sizeof(struct ...)'s into the coff
2972 style FOOSZ macros. I'm not sure this is right, but I can't
2973 remember why. xoxorich.]
2975 Fri Feb 21 01:08:48 1992 K. Richard Pixley (rich@cygnus.com)
2977 * Makefile.in, configure.in, doc: use the doc. Build it, install
2980 Tue Feb 18 02:21:25 1992 K. Richard Pixley (rich at cygnus.com)
2982 * read.c: white space and comments only.
2984 * configure.in: use the new atof-ns32.c for ns32k.
2986 * write.c: comment change only.
2988 * tc-m88k.[hc]: pulled in from hack's unfinished work. These
2989 aren't yet integrated.
2991 * tc-i860.[hc]: blew off the dust. Something must still be done
2992 about conflicting relocation types.
2994 * tc-ns32k.c: Replaced previous tc_aout_fix_to_chars stub with the
2997 * tc-i960.c, tc-sparc.c: white space and comments only.
2999 * tc-a29k.h: delete duplicate macro definition.
3001 * new file atof-ns32k.c copied from hack's last unreleased gas.
3003 Mon Feb 17 07:51:06 1992 K. Richard Pixley (rich at cygnus.com)
3005 * config/tc-ns32k.c: actually make tc_aout_fix_to_chars work
3008 * nearly everything. flush ChangeLog, package as gas-1.92.1.
3009 ChangeLog's prior to this are sketchy at best. I have logs.
3010 They just aren't ChangeLogs.