1 2007-11-19 Bob Wilson <bob.wilson@acm.org>
3 * dwarf2dbg.h (dwarf2_loc_directive_seen): New.
4 * dwarf2dbg.c (loc_directive_seen): Make external and rename to...
5 (dwarf2_loc_directive_seen): ...this.
6 (dwarf2_emit_insn, dwarf2_consume_line_info)
7 (dwarf2_emit_label, dwarf2_directive_loc): Use new name.
9 2007-11-19 Bob Wilson <bob.wilson@acm.org>
11 * dwarf2dbg.c (dwarf2_emit_label): Use dwarf2_consume_line_info.
13 2007-11-19 Bob Wilson <bob.wilson@acm.org>
15 * dwarf2dbg.c (dwarf2_consume_line_info): New.
16 (dwarf2_emit_insn): Use it here.
17 (dwarf2_directive_loc): Fix check for consecutive .loc directives
18 when debug_type is DEBUG_DWARF2.
19 * dwarf2dbg.h (dwarf2_consume_line_info): New prototype.
20 * config/tc-ia64.c (ia64_flush_insns): Call dwarf2_consume_line_info.
21 (md_assemble): Likewise.
23 2007-11-17 Thiemo Seufer <ths@mips.com>
25 * config/tc-mips.c (md_parse_option): Match mips_optimize to the -O
26 option supplied, but still keep mips_optimize == 2 as default value.
28 2007-11-17 Thiemo Seufer <ths@mips.com>
30 * doc/as.texinfo: Document the new attribute value.
32 2007-11-16 Eric B. Weddington <eric.weddington@atmel.com>
34 * config/tc-avr.c (mcu_types): Add ATmega32HVB device.
35 * doc/c-avr.texi: Likewise.
37 2007-11-16 Eric B. Weddington <eric.weddington@atmel.com>
39 * config/tc-avr.c (mcu_types): Add ATmega1284P device.
40 * doc/c-avr.texi: Likewise.
42 2007-11-14 Tristan Gingold <gingold@adacore.com>
44 * config/tc-ia64.c (AR_RUC): Defined.
46 (specify_resource): Handle AR_RUC like AR_ITC.
48 2007-11-13 Nick Clifton <nickc@redhat.com>
50 * config/tc-mn10300.c (mn10300_force_relocation): Force a reloc to
51 be generated for alignment fixups.
52 * config/tc-mn10300.h (TC_FORCE_RELOCATION): Call
53 mn10300_force_relocation.
55 2007-11-12 Nick Clifton <nickc@redhat.com>
58 * config/tc-frv.c (md_show_usage): Rewrite usage description to
59 make it easier to translate.
60 * gas/po/gas.pot: Regenerate.
62 2007-11-12 Tristan Gingold <gingold@adacore.com>
64 * config/tc-ppc.c (md_assemble): If -mregnames, when parsing
65 PPC_OPERAND_CR always parse as expression to allow register name
66 followed by an expression.
68 2007-11-09 H.J. Lu <hongjiu.lu@intel.com>
70 * config/tc-i386.c (match_template): Re-order suffix check.
72 2007-11-07 Bob Wilson <bob.wilson@acm.org>
74 * config/tc-xtensa.c (relaxable_section): Check for .eh_frame.
76 2007-11-07 Eric B. Weddington <eweddington@cso.atmel.com>
78 * config/tc-avr.c (mcu_types): Add ATtiny88 device.
79 * doc/c-avr.texi: Likewise.
81 2007-11-07 Anatoly Sokolov <aesok@post.ru>
83 * config/tc-avr.c (mcu_types): Add new devices: ATmega48P,
84 ATmega88P, ATmega168P, Atmega328P
85 * doc/c-avr.texi: Document new devices.
87 2007-11-07 Tristan Gingold <gingold@adacore.com>
89 * config/tc-ppc.c (md_apply_fix): For PPC_TOC16 on XCOFF, uses
90 offset within the TOC instead of the VMA.
92 2007-11-06 Paul Brook <paul@codesourcery.com>
94 * config/tc-arm.c (do_mull): Allow overlapping Rm for armv6.
96 2007-11-06 Nick Clifton <nickc@redhat.com>
98 * ehopt.c (check_eh_frame): If md_allow_eh_opt is defined, invoke
99 it to see if the optimizations should be applied.
100 * config/tc-mn10300.h (md_allow_eh_opt): Define. Only allow call
101 frame optimization if linker relaxation is not enabled.
103 2007-11-05 Danny Smith <dannysmith@users.sourceforge.net>
105 * read.c (ALIGN_LIMIT): Rename to ...
106 (TC_ALIGN_LIMIT): Guard against prior definition.
107 * config/tc-i386.h (TC_ALIGN_LIMIT)[TE_PE]: Define.
109 2007-11-01 Sterling Augustine <sterling@tensilica.com>
111 * config/tc-xtensa.c (xtensa_symbol_new_hook): New.
112 (xtensa_mark_difference_of_two_symbols): New.
113 (xtensa_post_relax_hook): Call xtensa_mark_difference_of_two_symbols.
114 * config/tc-xtensa.h (xtensa_symfield_type): Add next_expr_symbol.
115 (tc_symbol_new_hook): Define.
117 2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
119 * config/tc-i386.c (md_assemble): Replace no_xsuf with
121 (match_template): Likewise.
123 2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
125 * config/tc-i386.h (LONG_DOUBLE_MNEM_SUFFIX): Use a non-ascii
128 2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
130 * config/tc-i386.c (process_suffix): Check addrprefixop0 to
131 see if the address size override prefix changes the size of the
133 (check_byte_reg): Don't warn if byteokintel is set.
134 (check_long_reg): Set i.suffix to QWORD_MNEM_SUFFIX if toqword
136 (check_qword_reg): Set i.suffix to LONG_MNEM_SUFFIX if todword
139 2007-10-31 Eric B. Weddington <eweddington@cso.atmel.com>
141 * config/tc-avr.c (mcu_types): Remove devices that were never produced:
142 attiny10, atmega83, atmega85, atmega603.
143 * doc/c-avr.texi: Likewise.
145 2007-10-30 Nick Clifton <nickc@redhat.com>
147 * config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when
148 sym_diff relocs should be generated.
149 (md_apply_fix): Skip R_MN10300_ALIGN relocs.
150 (mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs.
151 (mn10300_handle_align): New function. Generate R_MN10300_ALIGN
152 relocs to record alignment requests.
153 * config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force
154 R_MN10300_ALIGN relocs.
155 (HANDLE_ALIGN): Define. Call mn10300_handle_align.
157 2007-10-30 Nick Clifton <nickc@redhat.com>
159 * doc/as.texinfo (Section): Replace "subsegment" with
162 2007-10-27 H.J. Lu <hongjiu.lu@intel.com>
165 * config/obj-elf.c (obj_elf_section): Handle optional
166 parameters for .pushsection.
168 * doc/as.texinfo: Document optional parameters for
171 2007-10-24 H.J. Lu <hongjiu.lu@intel.com>
173 * configure.in: Move AM_PROG_LIBTOOL after AC_GNU_SOURCE.
174 * configure: Regenerated.
176 2007-10-24 Alan Modra <amodra@bigpond.net.au>
178 * Makefile.am (INCLUDES, DEP_INCLUDES): Remove -D_GNU_SOURCE.
180 * configure.in: Invoke AC_GNU_SOURCE.
181 * Makefile.in: Regenerate.
182 * config.in: Regenerate.
183 * configure: Regenerate.
185 2007-10-19 Nick Clifton <nickc@redhat.com>
187 * expr.c (expr): Test md_allow_local_subtract (if defined) before
188 allowing the evaluation of an expression involving two symbols
189 defined in the same section.
190 * doc/internals.texi (md_allow_local_subtract): Document the new
192 * config/tc-mn10300.h (md_allow_local_subtract): Define.
193 (RELAX_EXPANSION_POSSIBLE): Define.
194 (MAX_RELOC_EXPANSION): Define.
195 (TC_FRAG_TYPE): Define.
196 * config/tc-mn10300.c (md_assemble): Mark fragments as containing code.
197 (tc_gen_reloc): Return an array of relocs. If necessary generate
198 two relocs to handle an expressions involving the difference of
200 (mn10300_fix_adjustable): Do not test TC_FORCE_RELOCATION_LOCAL
201 when then fixup is not pc-relative.
202 (mn10300_allow_local_subtract): New function. Determine when it
203 is safe to compute the difference between two symbols at assemble
206 2007-10-19 Alan Modra <amodra@bigpond.net.au>
208 * config/tc-ppc.c (ppc_parse_name): Skip leading '%'.
209 (md_assemble): When parsing PPC_OPERAND_CR, add '%' to set of
210 chars that can start a name.
212 2007-10-18 Carlos O'Donell <carlos@systemhalted.org>
214 * config/tc-hppa.c (pa_ip): Fix comment typo.
217 2007-10-18 Nick Clifton <nickc@redhat.com>
220 * config/tc-arc.c (md_estimate_size_before_relax): Change error
222 (md_convert_frag): Just call abort.
223 * config/tc-i860.c (md_estimate_size_before_relax): Change error
225 * config/tc-i860.h (md_convert_frag): Just call abort.
226 * config/tc-ip2k.c (md_estimate_size_before_relax): Change error
228 (md_convert_frag): Just call abort.
229 * config/tc-m68k.c (m68k_ip): Do not attempt translation of
232 * config/tc-arm.c: Fix formatting and spelling errors.
234 * config/tc-xc16x.c: Fix formatting and internationalization.
235 * po/gas.pot: Regenerate.
237 2007-10-17 Nick Clifton <nickc@redhat.com>
240 * as.h (ieee_md_atof, vax_md_atof): New prototypes.
241 * read.c (s_float_space): Allow a zero length return from md_atof
242 if the error message has been set.
243 (float_cons): Likewise.
244 * config/atof-ieee.c (ieee_md_atof): New function. Performs the
245 md_atof() function in a generic way for IEEE using targets.
246 * config/atof-vax.c (md_atof): Rename to vax_md_atof. Use the
247 same error message as ieee_md_atof.
248 * tc-alpha.c (md_atof): Use ieee_md_atof. Remove #define of vax_md_atof.
249 * tc-arc.c (md_atof): Use ieee_md_atof.
250 * tc-arm.c (md_atof): Use sizeof (LITTLENUM_TYPE) instead of the
251 constant 2. Use a precision of 5 for the 'x' and 'p' types.
252 * tc-avr.c (md_atof): Use ieee_md_atof.
253 * tc-bfin.c (md_atof): Use ieee_md_atof.
254 * tc-cr16.c (md_atof): Use ieee_md_atof.
255 * tc-crx.c (md_atof): Use ieee_md_atof.
256 * tc-d10v.c (md_atof): Use ieee_md_atof.
257 * tc-d30v.c (md_atof): Use ieee_md_atof.
258 * tc-dlx.c (md_atof): Use ieee_md_atof.
259 * tc-fr30.c (md_atof): Use ieee_md_atof.
260 * tc-frv.c (md_atof): Use ieee_md_atof.
261 * tc-h8300.c (md_atof): Use ieee_md_atof.
262 * tc-hppa.c (md_atof): Use ieee_md_atof.
263 * tc-i370.c (md_atof): Use ieee_md_atof.
264 (i370_dc): Convert the 'E' type to 'f' before calling md_atof.
265 * tc-i386.c (md_atof): Use ieee_md_atof.
266 * tc-i860.c (md_atof): Use ieee_md_atof.
267 * tc-i960.c (md_atof): Use ieee_md_atof.
268 * tc-ia64.c (md_atof): Use the same error message as ieee_md_atof.
269 * tc-ip2k.c (md_atof): Use ieee_md_atof.
270 * tc-iq2000.c (md_atof): Use ieee_md_atof.
271 * tc-m32c.c (md_atof): Use ieee_md_atof.
272 * tc-m32r.c (md_atof): Use ieee_md_atof.
273 * tc-m68hc11.c (md_atof): Use ieee_md_atof.
274 * tc-m68k.c (md_atof): Use ieee_md_atof.
275 * tc-maxq.c (md_atof): Use ieee_md_atof.
276 * tc-mcore.c (md_atof): Use ieee_md_atof.
277 * tc-mep.c (md_atof): Use ieee_md_atof.
278 * tc-mips.c (md_atof): Use ieee_md_atof.
279 * tc-mmix.c (md_atof): Use ieee_md_atof.
280 * tc-mn10200.c (md_atof): Use ieee_md_atof.
281 * tc-mn10300.c (md_atof): Use ieee_md_atof.
282 * tc-msp430.c (md_atof): Use ieee_md_atof.
283 * tc-mt.c (md_atof): Use ieee_md_atof.
284 * tc-ns32k.c (md_atof): Use ieee_md_atof.
285 * tc-openrisc.c (md_atof): Use ieee_md_atof.
286 * tc-or32.c (md_atof): Use ieee_md_atof.
287 * tc-pdp11.c (md_atof): New function. Call vax_md_atof.
288 * tc-pj.c (md_atof): Use ieee_md_atof.
289 * tc-ppc.c (md_atof): Use ieee_md_atof.
290 * tc-s390.c (md_atof): Use ieee_md_atof.
291 * tc-score.c (md_atof): Use ieee_md_atof.
292 * tc-sh.c (md_atof): Use ieee_md_atof.
293 * tc-sparc.c (md_atof): Use ieee_md_atof.
294 * tc-spu.c (md_atof): Use ieee_md_atof.
295 * tc-tic30.c (md_atof): Use the same error message as ieee_md_atof.
296 * tc-tic4x.c (md_atof): Use the same error message as ieee_md_atof.
297 * tc-tic54.c (md_atof): Use ieee_md_atof.
298 * tc-v850.c (md_atof): Use ieee_md_atof.
299 * tc-vax.c (md_atof): New function. Call vax_md_atof.
300 * tc-xc16x.c (md_atof): Use ieee_md_atof.
301 * tc-xstormy16.c (md_atof): Use ieee_md_atof.
302 * tc-xtensa.c (md_atof): Use ieee_md_atof.
303 * tc-z8k.c (md_atof): Use ieee_md_atof.
304 * doc/internals.texi: Update description of md_atof function.
305 * po/gas.pot: Regenerate.
307 2007-10-16 Bob Wilson <bob.wilson@acm.org>
309 * doc/as.texinfo (Overview): Add Xtensa --rename-section option.
311 2007-10-16 Nick Clifton <nickc@redhat.com>
313 * config/obj-elf.c (obj_elf_type): Accept "common" as a valid
315 * doc/as.texinfo (.type): Document the types accepted by the
316 type pseudo op, including "common".
318 2007-10-15 Peter Bergner <bergner@vnet.ibm.com>
320 * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
321 according to major opcode number.
323 2007-10-15 Alan Modra <amodra@bigpond.net.au>
325 * read.c (do_s_func): Check asprintf return status.
326 * stabs.c (stabs_generate_asm_func): Likewise.
327 (stabs_generate_asm_endfunc): Likewise.
329 2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
331 * config/tc-i386.c (process_operands): Simplify implicit xmm0
334 2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
336 * config/tc-i386.c (process_operands): Check the firstxmm0
337 field in opcode_modifier for instruction with a implicit
338 xmm0 as the first operand.
340 2007-10-12 Eric B. Weddington <eweddington@cso.atmel.com>
342 * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B,
344 * doc/c-avr.texi: Document new devices.
346 2007-10-12 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
348 * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc>
349 instruction range information.
351 2007-10-12 Daniel Jacobowitz <dan@codesourcery.com>
353 * doc/as.texinfo (Object Attributes): New chapter.
354 (Pseudo Ops): Document .gnu_attribute.
355 (LNS directives): Correct .loc_mark_labels documentation.
357 2007-10-11 Nick Clifton <nickc@redhat.com>
359 * config/obj-elf.c (obj_elf_section): When pushing a section, if
360 there is a comma then the following argument must be a subsection
363 2007-10-11 H.J. Lu <hongjiu.lu@intel.com>
365 * doc/c-i386.texi: Update which instruction's operands are
368 2007-10-11 Nick Clifton <nickc@redhat.com>
371 * config/tc-ia64.c: Allow for translations of error and warning
373 * po/gas.pot: Regenerate.
376 * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error
378 * po/gas.pot: Regenerate.
381 * config/tc-msp430.c: Fix spelling typos.
383 2007-10-11 Nick Clifton <nickc@redhat.com>
385 * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
387 2007-10-08 Maciej W. Rozycki <macro@linux-mips.org>
389 * config/tc-mips.c (AT): Rename to...
391 (AT): New definition.
392 (mips_set_options): Rename "noat" to "at"; change the type.
393 (mips_opts): Update accordingly.
394 (append_insn): Likewise.
395 (macro_build_ldst_constoffset): Likewise.
396 (load_address): Likewise.
397 (macro, macro2): Likewise.
398 (s_mipsset): Handle ".set at=REG". Update handling of ".set at"
401 2007-10-08 Nick Clifton <nickc@redhat.com>
403 * doc/as.texinfo (Previous): Clarify explanation of the behaviour
404 of this pseudo-op and add a couple of examples.
406 2007-10-08 Nick Clifton <nickc@redhat.com>
408 PR gas/5121 gas/5122 gas/5123
409 * Makefile.am (CFILES): Add cgen.c
410 (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
411 tc-tic4x.c and xtensa-relax.c.
412 (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
413 tc-tic4x.h and xtensa-relax.h.
414 (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
415 te-ic960.h, te-linux.h. Add te-aix5.h, te-armeabi.h,
416 te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
417 (CONFIG_ATOF_CFILES): New variable.
418 (POTFILES): Add CONFIG_ATOF_CFILES to dependencies. Fix typo with
419 dependency upon TARG_ENV_HFILES.
420 (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
421 cgen-desc.h when foo-desc.h does not exit.
423 * Makefile.in: Regenerate.
424 * doc/Makefile.in: Regenerate.
425 * po/POTFILES.in: Regenerate.
427 * po/es.po: Regenerate.
428 * po/fr.po: Regenerate.
429 * po/gas.pot: Regenerate.
430 * po/rw.po: Regenerate.
431 * po/tr.po: Regenerate.
432 * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
435 * config/obj-som.c: Likewise.
437 * config/tc-arc.c: Likewise.
439 * config/tc-arm.c: Likewise.
441 * config/tc-bfin.c: Likewise.
443 * config/tc-frv.c: Likewise.
445 * config/tc-dlx.c: Likewise.
447 2007-10-08 Eric B. Weddington <eweddington@cso.atmel.com>
449 * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
450 ATtiny48, AT90PWM216, AT90PWM316.
451 * doc/c-avr.texi: Document new devices.
453 2007-10-08 Nick Clifton <nickc@redhat.com>
456 * config/tc-arm.c (md_apply_fix): Correct error message.
458 * config/tc-arm.c (md_apply_fix): Likewise.
460 * config/tc-bfin.c (md_apply_fix): Fix error message.
462 (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
464 2007-10-05 H.J. Lu <hongjiu.lu@intel.com>
466 * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
467 immediate operands directly for instructions with 4 operands.
469 2007-10-04 H.J. Lu <hongjiu.lu@intel.com>
472 * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
473 is ignored in Intel mode.
475 2007-10-04 Helge Deller <deller@gmx.de>
477 * read.c (potable): Add string8, string16, string32 and string64.
478 Add bit size for stringer function.
479 (stringer_append_char): New.
480 (stringer): Use stringer_append_char().
481 * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
482 * config/obj-elf.c (obj_elf_ident): Likewise.
483 * config/tc-alpha.c (s_alpha_stringer): Likewise.
484 * config/tc-dlx.c (dlx_pseudo_table): Likewise.
485 * config/tc-hppa.c (pa_stringer): Likewise.
486 * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
487 * config/tc-m68hc11.c (md_pseudo_table): Likewise.
488 * config/tc-mcore.c (md_pseudo_table): Likewise.
489 * config/tc-mips.c (mips_pseudo_table): Likewise.
490 * config/tc-spu.c (md_pseudo_table): Likewise.
491 * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
492 * doc/as.texinfo (ABORT): Fix identing.
493 (String): Document new string8, string16, string32, string64
495 * NEWS: Mention the new feature.
497 2007-10-03 Nick Clifton <nickc@redhat.com>
500 * config/tc-avr.c (avr_get_constant): Extend error message to
501 mention that the constant must be positive.
503 2007-10-03 Nick Clifton <nickc@redhat.com>
505 * config/tc-avr.c (avr_get_constant):
507 * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
509 (md_assemble): Fix spelling typo.
511 2007-10-03 Alan Modra <amodra@bigpond.net.au>
514 * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
516 2007-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
518 * config/tc-cr16.c: Replaced 'tabs' with white spaces and
519 added R_CR16_DISP8 as default reloc type for b<cc> instructions.
521 2007-09-30 H.J. Lu <hongjiu.lu@intel.com>
524 * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
525 (check_qword_reg): Also handle cvttsd2si.
527 2007-09-27 Kazu Hirata <kazu@codesourcery.com>
529 * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
530 (last_movec_reg): Change to MBO.
531 * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
532 (m68k_ip): Use MBO instead of MBO.
533 (init_table): Use MBO instead of MBO. Add an entry for mbo.
535 2007-09-26 Jan Beulich <jbeulich@novell.com>
537 * config/tc-i386.c (build_modrm_byte): Also check for RegEip
538 when considering IP-relative addressing.
540 2007-09-26 Jan Beulich <jbeulich@novell.com>
542 * config/tc-i386.h (md_register_arithmetic): Define.
543 * config/tc-ia64.h (md_register_arithmetic): Likewise.
544 * doc/internals.texi: Document md_register_arithmetic.
545 * expr.c (make_expr_symbol): Force O_register expressions into
547 (expr): Provide default for md_register_arithmetic. Don't resolve
548 adding/subtracting constants to/from registers if
549 md_register_arithmetic is zero.
551 2007-09-26 Jan Beulich <jbeulich@novell.com>
553 * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
554 (cfi_finish): Add second empty instance.
556 2007-09-26 Jan Beulich <jbeulich@novell.com>
558 * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
559 with simple call to parse_operand.
561 2007-09-26 Jan Beulich <jbeulich@novell.com>
563 * config/tc-i386.c (NUM_FLAG_CODE): Remove.
565 2007-09-26 Jan Beulich <jbeulich@novell.com>
567 * as.c (itbl_parse): Remove #define.
568 (struct itbl_file_list): Move down and ...
569 (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
570 (show_usage): Conditionalize printing of --itbl option upon
572 (parse_args): Conditionalize handling of -t/--itbl options upon
573 HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
576 2007-09-25 H.J. Lu <hongjiu.lu@intel.com>
578 * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
581 2007-09-25 Nathan Sidwell <nathan@codesourcery.com>
583 * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
584 (BRANCHBWPL, FRAG_VAR_SIZE): New.
585 (md_relax_table): Add BRANCHBWPL entries.
586 (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
587 (md_assemble): Use FRAG_VAR_SIZE.
588 (md_convert_frag_1): Add BRANCHBWPL cases.
589 (md_estimate_size_before_relaz): Likewise.
591 2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
593 * config/tc-mips.c (s_align): Set max_alignment to 28.
595 2007-09-20 H.J. Lu <hongjiu.lu@intel.com>
598 * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
599 (set_allow_index_reg): New.
600 (allow_index_reg): Likewise.
601 (md_pseudo_table): Add "allow_index_reg" and
602 "disallow_index_reg".
603 (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
604 fake index registers.
605 (i386_scale): Updated.
606 (i386_index_check): Support fake index registers.
607 (parse_real_register): Return NULL on eiz/riz if fake index
608 registers aren't allowed.
610 2007-09-19 Nick Clifton <nickc@redhat.com>
612 * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
615 2007-09-19 Bob Wilson <bob.wilson@acm.org>
617 * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
619 2007-09-18 Bernd Schmidt <bernd.schmidt@analog.com>
621 * config/bfin-parse.y (asm_1): Slightly improve error messages
624 2007-09-18 Alan Modra <amodra@bigpond.net.au>
627 * read.c (emit_expr): Only use long long if required and available.
629 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
631 * config/tc-i386.c (baseindex): Removed.
632 (build_modrm_byte): Check reg_num for RIP register instead of
634 (i386_index_check): Likewise.
636 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
639 * config/obj-coff.c (obj_coff_endef): Remove checking size of
640 def_symbol_in_progress.
642 2007-09-17 Evandro Menezes <evandro@yahoo.com>
645 * read.c (emit_expr): Use unsigned long long values in warning
646 message about truncated expressions.
648 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
650 * config/tc-i386.c (intel_e04): Revert the last change.
652 2007-09-17 Nick Clifton <nickc@redhat.com>
654 * po/es.po: Updated Spanish translation.
656 2007-09-15 H.J. Lu <hongjiu.lu@intel.com>
659 * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
662 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
664 * config/tc-i386.c (build_modrm_byte): Adjust comment line
667 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
669 * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
672 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
674 * config/tc-i386.c (build_modrm_byte): Adjust indentation.
676 2007-09-14 Michael Meissner <michael.meissner@amd.com>
677 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
678 Tony Linthicum <tony.linthicum@amd.com>
680 * NEWS: Add SSE5 support to NEWS file.
682 * config/tc-i386.h (drex_byte): Add fields to allow process_drex
683 and build_modrm_byte to communicate.
684 (DREX_OC0): New SSE5 macro.
685 (DREX_OC0_MASK): Ditto.
687 (DREX_OC1_MASK): Ditto.
688 (DREX_XMEM_X1_X2_X2): Ditto.
689 (DREX_X1_XMEM_X2_X2): Ditto.
690 (DREX_X1_XMEM_X2_X1: Ditto.
691 (DREX_X1_X2_XMEM_X1: Ditto.
692 (DREX_XMEM_X1_X2): Ditto.
693 (DREX_X1_XMEM_X2): Ditto.
694 (drex_byte): New structure to describe the DREX byte.
696 * config/tc-i386.c (process_drex): New function to handle SSE5
698 (build_modrm_byte): Use the information cached away in
699 process_drex in the case of DREX instructions.
700 (i386_insn): Add drex field.
701 (pi): Add debugging of drex field.
702 (md_assemble): Treat SSE5 like SSE3 in instructions with an
703 immediate byte. Move REX field to DREX if this is a DREX
705 (process_operands): Add SSE5 support.
706 (build_modrm_byte): Ditto.
707 (output_insn): Ditto.
709 (i386_align_code): Ditto.
711 2007-09-12 Jan Beulich <jbeulich@novell.com>
713 * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
714 after generic operand swapping, and swap only the immediate operands.
716 2007-09-11 Nathan Sidwell <nathan@codesourcery.com>
718 * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
719 (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
721 2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
723 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
726 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
728 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
729 (cpu_flags_check_cpu64): This. Inline.
730 (uints_all_zero): New.
731 (uints_set): Likewise
732 (uints_equal): Likewise
733 (UINTS_ALL_ZERO): Likewise
734 (UINTS_SET): Likewise
735 (UINTS_CLEAR): Likewise
736 (UINTS_EQUAL): Likewise
737 (cpu_flags_and): Likewise.
738 (cpu_flags_or): Likewise.
739 (operand_type_and): Likewise.
740 (operand_type_or): Likewise.
741 (operand_type_xor): Likewise.
742 (cpu_flags_not): Inline and use switch instead of loop.
743 (cpu_flags_match): Updated.
744 (operand_type_match): Likewise.
745 (smallest_imm_type): Likewise.
746 (set_cpu_arch): Likewise.
748 (md_assemble): Likewise.
749 (parse_insn): Likewise.
750 (optimize_imm): Likewise.
751 (match_template): Likewise.
752 (process_suffix): Likewise.
753 (update_imm): Likewise.
754 (finalize_imm): Likewise.
755 (process_operands): Likewise.
756 (build_modrm_byte): Likewise.
757 (i386_immediate): Likewise.
758 (i386_displacement): Likewise.
759 (i386_index_check): Likewise.
760 (i386_operand): Likewise.
761 (i386_target_format): Likewise.
762 (intel_e11): Likewise.
763 (operand_type): Remove implicitregister.
764 (operand_type_check): Updated. Inline.
765 (cpu_flags_all_zero): Removed.
766 (operand_type_all_zero): Likewise.
767 (i386_array_biop): Likewise.
768 (cpu_flags_biop): Likewise.
769 (operand_type_biop): Likewise.
771 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
773 * Makefile.am: Run "make dep-am".
774 * Makefile.in: Regenerate.
776 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
778 * configure.in (AC_CHECK_HEADERS): Add limits.h.
779 * configure: Regenerated.
780 * config.in: Likewise.
782 * config/tc-i386.c: Include "opcodes/i386-init.h".
783 (_i386_insn): Use i386_operand_type for types.
784 (cpu_arch_flags): Updated to new types with bitfield.
785 (cpu_arch_tune_flags): Likewise.
786 (cpu_arch_isa_flags): Likewise.
787 (cpu_arch): Likewise.
788 (i386_align_code): Likewise.
789 (set_code_flag): Likewise.
790 (set_16bit_gcc_code_flag): Likewise.
791 (set_cpu_arch): Likewise.
792 (md_assemble): Likewise.
793 (parse_insn): Likewise.
794 (process_operands): Likewise.
795 (output_branch): Likewise.
796 (output_jump): Likewise.
797 (parse_real_register): Likewise.
798 (mode_from_disp_size): Likewise.
799 (smallest_imm_type): Likewise.
801 (type_names): Likewise.
804 (swap_2_operands): Likewise.
805 (optimize_imm): Likewise.
806 (optimize_disp): Likewise.
807 (match_template): Likewise.
808 (check_string): Likewise.
809 (process_suffix): Likewise.
810 (check_byte_reg): Likewise.
811 (check_long_reg): Likewise.
812 (check_qword_reg): Likewise.
813 (check_word_reg): Likewise.
814 (finalize_imm): Likewise.
815 (build_modrm_byte): Likewise.
816 (output_insn): Likewise.
817 (disp_size): Likewise.
818 (imm_size): Likewise.
819 (output_disp): Likewise.
820 (output_imm): Likewise.
822 (i386_immediate): Likewise.
823 (i386_displacement): Likewise.
824 (i386_index_check): Likewise.
825 (i386_operand): Likewise.
826 (parse_real_register): Likewise.
827 (i386_intel_operand): Likewise.
828 (intel_e09): Likewise.
829 (intel_bracket_expr): Likewise.
830 (intel_e11): Likewise.
831 (cpu_arch_flags_not): New.
832 (cpu_flags_check_x64): Likewise.
833 (cpu_flags_all_zero): Likewise.
834 (cpu_flags_not): Likewise.
835 (i386_cpu_flags_biop): Likewise.
836 (cpu_flags_biop): Likewise.
837 (cpu_flags_match); Likewise.
841 (reg16_inoutportreg): Likewise.
845 (disp16_32): Likewise.
847 (baseindex): Likewise.
855 (imm16_32): Likewise.
856 (imm16_32s): Likewise.
857 (imm16_32_32s): Likewise.
858 (operand_type): Likewise.
859 (operand_type_check): Likewise.
860 (operand_type_match): Likewise.
861 (operand_type_register_match): Likewise.
862 (update_imm): Likewise.
863 (set_code_flag): Also update cpu_arch_flags_not.
864 (set_16bit_gcc_code_flag): Likewise.
865 (md_begin): Likewise.
866 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
867 Use cpu_flags_match to match instructions.
868 (i386_target_format): Update cpu_arch_isa_flags and
869 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
870 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
871 (match_template): Don't initialize overlap0, overlap1,
872 overlap2, overlap3 and operand_types.
873 (process_suffix): Handle crc32 with 64bit register.
875 (CONSISTENT_REGISTER_MATCH): Likewise.
877 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
880 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
882 * config/tc-i386.c (match_template): Handle invlpga, vmload,
883 vmrun and vmsave in SVME.
884 (process_suffix): Likewise.
886 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
888 * config/tc-i386.c (i386_index_check): Don't use RegRex
889 on the reg_type field.
890 (parse_real_register): Use `||' instead of `|'.
892 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
894 * config/tc-i386.c (process_operands): Remove segment override
895 check on SVME instructions.
896 (i386_index_check): Remove memory operand check on SVME
899 2007-09-04 Alan Modra <amodra@bigpond.net.au>
901 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
902 (md_assemble): Update init of insn. Use insn.reloc instead of
903 calculating from flag.
904 (get_imm): Set reloc rather than flag.
905 (calcop): Formatting.
907 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
909 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
911 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
913 * doc/c-arc.texi: Fix typo.
915 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
917 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
920 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
922 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
923 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
925 (m68k_cpus): Adjust 5407 entry.
927 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
929 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
930 (m68k_cpus): Define 51QE cpu.
932 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
933 Joseph Myers <joseph@codesourcery.com>
935 * as.c (main): Flush stderr before printing listings to ensure
936 consistent output order across platforms.
938 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
940 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
942 2007-08-24 Joseph Myers <joseph@codesourcery.com>
943 Paul Brook <paul@codesourcery.com>
946 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
947 * as.c (show_usage): Document --debug-prefix-map option.
948 (parse_args): Handle --debug-prefix-map.
949 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
950 * stabs.c (stabs_generate_asm_file): Remap debug paths.
951 * Makefile.am (GAS_CFILES): Add remap.c
952 (GENERIC_OBJS): Add remap.o.
953 Regenerate dependencies.
954 * Makefile.in: Regenerate.
955 * doc/as.texinfo (--debug-prefix-map): Document.
957 2007-08-24 Aurelien Jarno <aurel32@debian.org>
959 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
960 before printing them.
962 2007-08-24 Anders Waldenborg <anders@0x63.nu>
963 Alan Modra <amodra@bigpond.net.au>
965 * config/tc-i386.c (lex_got): Don't scan past a comma.
967 2007-08-23 Ben Elliston <bje@au.ibm.com>
969 * config/tc-ppc.c (parse_cpu): Handle "750cl".
970 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
971 (md_show_usage): Document -m750cl.
972 (md_assemble): Handle two delimiters in succession (eg. `),').
973 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
974 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
975 * testsuite/gas/ppc/ppc750ps.s: New file.
976 * testsuite/gas/ppc/ppc750ps.d: Likewise.
978 2007-08-23 Ben Elliston <bje@au.ibm.com>
980 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
982 2007-08-17 Alan Modra <amodra@bigpond.net.au>
985 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
987 (i386_immediate): Detect and complain about more cases of
988 invalid immediate expressions. Return failure rather than
989 converting them to zero.
990 (i386_displacement): Likewise.
992 2007-08-17 Alan Modra <amodra@bigpond.net.au>
994 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
996 2007-08-14 Andreas Schwab <schwab@suse.de>
998 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
1001 2007-08-12 Matthias Klose <doko@ubuntu.com>
1003 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
1004 $(top_srcdir)/../../bfd/doc.
1005 * doc/Makefile.in: Regenerate.
1007 2007-08-10 Nick Clifton <nickc@redhat.com>
1009 * NEWS: Add a marker for the 2.18 features.
1011 2007-08-09 Paul Brook <paul@codesourcery.com>
1013 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
1015 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
1017 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
1019 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
1021 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
1022 DWORD memory to Reg64 in Intel synax.
1023 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
1024 Reg32 in Intel syntax.
1026 2007-07-25 Sterling Augustine <sterling@tensilica.com>
1028 * config/tc-xtensa.c (xtensa_extui_opcode): New.
1029 (xg_expand_assembly_insn): Check for invalid extui operands.
1030 (md_begin): Initialize xtensa_extui_opcode.
1032 2007-07-24 Nick Clifton <nickc@redhat.com>
1034 * config/tc-mep.h (skip_whitespace): Remove definition.
1036 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
1038 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
1041 (f32_patt): Remove f32_15.
1042 (f16_patt): Likewise.
1043 (i386_align_code): Updated to alt_long_patt for 64bit by
1046 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
1048 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
1050 * config/tc-i386.c (i386_align_code): Enable alignment up to
1051 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
1054 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
1056 2007-07-20 Nick Clifton <nickc@redhat.com>
1058 * app.c (do_scrub_chars): Provide a one character buffer to hold a
1059 pushed back newline at the end of an unterminated quoted string.
1061 2007-07-14 Nick Clifton <nickc@redhat.com>
1063 * config/tc-arm.c (create_register_alias): Return a boolean rather
1065 Check the return value of insert_reg_alias and do not continue to
1066 create aliases once an insertion has failed.
1067 (s_unreq): Delete the all-upper-case and all-lower-case
1068 alternatives as well.
1070 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
1072 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
1073 * write.c: Likewise.
1075 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
1077 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
1080 2007-07-04 Richard Sandiford <richard@codesourcery.com>
1082 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
1083 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
1084 Deprecate *x and *fx.
1085 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
1088 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
1090 * config/obj-coff.h (x86_64_target_format): Renamed to ...
1091 (i386_target_format): This
1092 (TARGET_FORMAT): Use i386_target_format.
1094 * config/tc-i386.c (x86_64_target_format): Removed.
1095 (i386_target_format): Handle PE formats.
1097 2007-07-04 Nick Clifton <nickc@redhat.com>
1099 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
1100 to get the right length of printed value.
1102 2007-07-03 Nick Clifton <nickc@redhat.com>
1104 * COPYING: Replace with GPLv3 text.
1105 * app.c: Update copyright notice to refer to GPLv3.
1106 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
1107 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
1108 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
1109 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
1110 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
1111 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
1112 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
1113 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
1114 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
1115 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
1116 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
1117 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
1118 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
1119 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
1120 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
1121 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
1122 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
1123 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
1124 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
1125 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
1126 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
1127 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
1128 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
1129 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
1130 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
1131 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
1132 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
1133 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
1134 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
1135 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
1136 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
1137 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
1138 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
1139 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
1140 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
1141 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
1142 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
1143 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
1144 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
1145 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
1146 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
1147 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
1148 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
1149 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
1150 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
1151 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
1152 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
1153 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
1154 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
1155 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
1156 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
1157 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
1158 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
1159 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
1160 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
1161 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
1162 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
1163 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
1164 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
1165 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
1167 * flonum-mult.c: Likewise, and also correct typo referring to
1168 non-existant GNU Assembler General Public License.
1169 * config/tc-m68851.h: Likewise.
1170 * NEWS: Mention the new license. Also note where the 2.17 release
1172 * config/e-crisaout.c: Add copyright header.
1173 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
1174 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
1175 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
1176 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
1177 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
1178 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
1179 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
1180 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
1181 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
1182 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
1183 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
1184 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
1185 config/te-wince-pe.h: Likewise.
1187 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
1189 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
1190 (install_operand): Add E encoding.
1191 (md_begin): Check and skip initial '.' arg character.
1192 (get_num): Add 0..511 case.
1194 2007-07-03 Alan Modra <amodra@bigpond.net.au>
1197 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
1198 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
1200 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
1203 * app.c (do_scrub_chars <state 5>): Check for output buffer full
1206 2007-07-02 Joseph Myers <joseph@codesourcery.com>
1208 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
1209 s_dtprel_internal): New.
1210 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
1211 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
1212 BFD_RELOC_MIPS_TLS_DTPREL64.
1214 2007-07-02 Alan Modra <amodra@bigpond.net.au>
1216 * Makefile.am: Run "make dep-am".
1217 * Makefile.in: Regenerate.
1218 * aclocal.m4: Regenerate.
1219 * config.in: Regenerate.
1220 * doc/Makefile.in: Regenerate.
1221 * po/POTFILES.in: Regenerate.
1222 * po/gas.pot: Regenerate.
1224 2007-07-02 Alan Modra <amodra@bigpond.net.au>
1226 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
1227 coff section flag values to bfd section flag.
1229 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
1231 * aclocal.m4: Regenerated.
1232 * doc/Makefile.in: Likewise.
1233 * Makefile.in: Likewise.
1235 2007-06-29 Joseph Myers <joseph@codesourcery.com>
1237 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
1239 2007-06-29 Joseph Myers <joseph@codesourcery.com>
1241 * as.c (create_obj_attrs_section): New.
1242 (main): Call create_obj_attrs_section for ELF.
1243 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
1244 skip_past_comma, s_vendor_attribute): New.
1245 (potable): Add gnu_attribute for ELF.
1246 * read.h (s_vendor_attribute): Declare.
1247 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
1248 round s_vendor_attribute.
1249 (aeabi_set_public_attributes): Update for new attributes
1251 (arm_md_end): Remove attributes contents setting now done
1254 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
1256 * Makefile.am: Add CR16 related entry.
1257 * Makefile.in: Regenerate.
1258 * config/tc-cr16.h: New file
1259 * config/tc-cr16.c: New file
1260 * doc/c-cr16.texi: New file for cr16
1261 * doc/all.texi: Entry for cr16
1262 * doc/Makefile.am: Added c-cr16.texi
1263 * doc/Makefile.in: Regenerate
1264 * doc/as.texinfo: Entry for CR16 target
1265 * NEWS: Announce the support for the new target.
1267 2007-06-26 Paul Brook <paul@codesourcery.com>
1269 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
1271 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
1273 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
1275 * config/tc-i386.c (process_operands): Replace regKludge
1278 2007-06-25 Richard Sandiford <richard@codesourcery.com>
1280 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
1281 * config/tc-mips.c (append_insn): Record which symbols have
1282 R_MIPS16_26 relocations against them.
1283 (mips_fix_adjustable): Don't reduce relocations against such symbols.
1285 2007-06-22 Sterling Augustine <sterling@tensilica.com>
1287 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
1288 (frag_format_size): Handle RELAX_IMMED_STEP3.
1289 (xtensa_relax_frag, md_convert_frag): Likewise.
1290 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
1291 (RELAX_IMMED_MAXSTEPS): Adjust.
1292 * config/xtensa-relax.c (widen_spec_list): Add transitions from
1293 wide branches to branch-over-jumps.
1294 (build_transition): Handle wide branches in transition patterns.
1296 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
1298 * config/tc-i386.c (disp_size): New.
1299 (imm_size): Likewise.
1300 (output_disp): Use disp_size and imm_size.
1301 (output_imm): Use imm_size.
1303 2007-06-19 Sterling Augustine <sterling@tensilica.com>
1305 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
1306 use of literal_frag field.
1307 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
1308 in the literal_frag field.
1309 (xtensa_move_literals): Use it here instead of searching. Update
1310 literal_frag field with new value.
1312 2007-06-14 Paul Brook <paul@codesourcery.com>
1314 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
1315 narrow shift by immediate.
1317 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
1319 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
1321 * acinclude.m4: Don't include m4 files.
1322 (BFD_BINARY_FOPEN): Removed.
1323 Remove libtool kludge.
1325 * Makefile.in: Regenerated.
1326 * doc/Makefile.in: Likewise.
1327 * aclocal.m4: Likewise.
1328 * configure: Likewise.
1330 2007-06-11 Sterling Augustine <sterling@tensilica.com>
1331 Bob Wilson <bob.wilson@acm.org>
1333 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
1334 (XTENSA_PROP_NO_TRANSFORM): ...this.
1335 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
1336 (xtensa_mark_frags_for_org): New.
1337 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
1338 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
1339 (get_frag_property_flags): Adjust reference to is_no_transform flag.
1340 (xtensa_frag_flags_combinable): Likewise.
1341 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
1342 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
1344 2007-06-06 Paul Brook <paul@codesourcery.com>
1346 * config/tc-arm.c (s_align): Pad code sections appropriately.
1348 2007-06-05 Paul Brook <paul@codesourcery.com>
1350 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
1352 2007-06-05 Nick Clifton <nickc@redhat.com>
1355 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
1357 2007-06-05 Alan Modra <amodra@bigpond.net.au>
1359 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
1361 (tc_gen_reloc): Abort if neither addsy or subsy is set.
1362 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
1363 * config/tc-spu.h (md_operand): Handle @ppu without sym.
1365 2007-05-31 Paul Brook <paul@codesourcery.com>
1367 * config/tc-arm.c (insns): Allow strex on M profile cores.
1369 2007-05-29 David S. Miller <davem@davemloft.net>
1370 Jakub Jelinek <jakub@redhat.com>
1373 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
1374 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
1376 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1378 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
1380 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1382 * config/tc-ppc.c: Convert to ISO C.
1383 * config/tc-ppc.c: Likewise.
1385 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1387 * write.h (EXEC_MACHINE_TYPE): Delete.
1388 (string_byte_count, section_alignment): Delete.
1390 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
1392 * app.c (do_scrub_chars): Cope with \ at end of buffer.
1394 2007-05-26 Alan Modra <amodra@bigpond.net.au>
1396 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1397 top 32 bits of 64 bit value if so doing results in passing
1398 range check. Rewrite sign extension fudges similarly. Enable
1399 fudges for powerpc64 too. Report user value if range check
1400 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
1401 range rather than value, also to report user value on failure.
1403 2007-03-25 Paul Brook <paul@codesourcery.com>
1405 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1406 (do_t_add_sub): Correctly encode subs pc, lr, #const.
1407 (do_t_mov_cmp): Correctly encode movs pc, lr.
1409 2007-05-24 Steve Ellcey <sje@cup.hp.com>
1411 * Makefile.in: Regnerate.
1412 * configure: Regenerate.
1413 * aclocal.m4: Regenerate.
1414 * doc/Makefile.in: Regenerate.
1416 2007-05-22 Bob Wilson <bob.wilson@acm.org>
1418 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1419 and index entries about automatic alignment of ENTRY instructions.
1421 2007-05-22 Nick Clifton <nickc@redhat.com>
1423 * doc/as.texinfo: Use @copying around the copyright notice.
1425 2007-05-18 Joseph Myers <joseph@codesourcery.com>
1427 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1430 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
1433 2003-06-05 Michal Ludvig <mludvig@suse.cz>
1434 * doc/as.texinfo: Document new directives: .cfi_restore,
1435 .cfi_undefined, .cfi_same_value, .cfi_return_column,
1436 .cfi_remember_state and .cfi_restore_state.
1438 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
1440 * config/tc-m68k.c (md_apply_fix): Show value of out of range
1441 fixups in error message.
1442 (md_conver_frag_1): Propagate the fix source location and use
1443 as_bad_where rather than fatal, for better error messages.
1445 2007-05-16 Paul Brook <paul@codesourcery.com>
1447 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1449 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
1451 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1453 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
1456 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1457 addend is stored for relocs against weak symbols.
1458 (md_apply_fix): So not loose track of addend for relocs against
1461 2007-05-14 Thiemo Seufer <ths@mips.com>
1463 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1465 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
1467 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1468 addri, addri.c, subi, and subi.c when immediate number is hex.
1469 (score_insns): Remove subis and subis.c.
1470 (do_sub_rdi16): Delete.
1472 2007-05-11 Alan Modra <amodra@bigpond.net.au>
1474 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
1476 (md_assemble): Tidy use of insn.flag.
1477 (get_imm): Likewise. Handle uppercase input too.
1478 (spu_cons): New function.
1479 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1480 (TC_FORCE_RELOCATION): Don't resolve them either.
1482 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
1484 * config/tc-arm.c (md_apply_fix): Generate more accurate
1485 diagnostic when 8-bit immediate range is exceeded for
1486 BFD_RELOC_ARM_OFFSET_IMM8.
1488 2007-05-04 Alan Modra <amodra@bigpond.net.au>
1491 * config/tc-i386.c (lex_got): Don't replace the reloc token with
1492 a space if we already have a space.
1494 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
1496 * config/tc-i386.c (match_template): Don't explicitly check
1497 suffix for crc32 in Intel mode.
1498 (process_suffix): Issue an error for crc32 if the operand size
1501 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
1502 Nick Clifton <nickc@redhat.com>
1505 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1506 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1507 (md_apply_fix): Put zero values into the frags referencing weak
1510 2007-05-02 Alan Modra <amodra@bigpond.net.au>
1513 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1516 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
1518 * config/tc-i386.c (match_template): Check suffix for crc32 in
1520 (process_suffix): Default the suffix of 8bit crc32 to
1522 (check_byte_reg): Skip check for 8bit crc32.
1524 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
1526 * config/tc-i386.c (md_assemble): Use register_prefix in
1527 error/warning message.
1528 (check_byte_reg): Likewise.
1529 (check_long_reg): Likewise.
1530 (check_qword_reg): Likewise.
1531 (check_word_reg): Likewise.
1532 (process_operands): Likewise.
1534 2007-04-30 Alan Modra <amodra@bigpond.net.au>
1537 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1540 2007-04-28 Thiemo Seufer <ths@networkno.de>
1542 * config/tc-mips.c: Fix comment.
1544 2007-04-26 Anatoly Sokolov <aesok@post.ru>
1546 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1547 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1548 * doc/c-avr.texi: Document new devices.
1550 2007-04-24 Alan Modra <amodra@bigpond.net.au>
1552 * Makefile.am: Run "make dep-am".
1553 * Makefile.in: Regenerate.
1555 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
1557 * config/tc-m68k.c (mcf54455_ctrl): New.
1558 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1559 (m68k_archs): Add isac.
1560 (m68k_cpus): Add 54455 family.
1561 (m68k_ip): Split Bg into Bb, Bs, Bg.
1562 (m68k_elf_final_processing): Add ISA_C.
1563 * doc/c-m68k.texi (M680x0 Options): Add isac.
1565 2007-04-22 Alan Modra <amodra@bigpond.net.au>
1567 * read.c (read_a_source_file): Skip multiple spaces to
1568 cover hack in mmix md_start_line_hook which overwrites a
1569 colon with a space. Delete sermon and needless assertion.
1571 2007-04-21 Alan Modra <amodra@bigpond.net.au>
1573 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1574 (md_atof): Make number_of_chars unsigned. Revert last change.
1575 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1576 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1577 * config/tc-sh.h (md_optimize_expr): Likewise.
1578 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1580 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1582 2007-04-21 Nick Clifton <nickc@redhat.com>
1584 * config/atof-vax.c (md_atof): Fix comparison inside know().
1586 * config/tc-ia64.c (emit_one_bundle): Fix typo.
1588 2007-04-21 Alan Modra <amodra@bigpond.net.au>
1590 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1591 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1592 Don't skip over NUL char.
1593 (pseudo_set): Set X_op for registers to O_register.
1594 * symbols.c (symbol_clone): Remove assertion that sym is defined.
1595 (resolve_symbol_value): Resolve O_register symbols.
1596 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1597 Instead find st(0) by hash lookup.
1598 * config/tc-ppc.c (ppc_macro): Warning fix.
1600 * as.h (ENABLE_CHECKING): Default define to 0.
1601 (know): Assert if ENABLE_CHECKING.
1602 (struct relax_type): Remove superfluous declaration.
1603 * configure.in (--enable-checking): New.
1604 * configure: Regenerate.
1605 * config.in: Regenerate.
1606 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1607 Check for duplicate powerpc_operands entries.
1609 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
1611 * config/tc-m68k.c (mcf5253_ctrl): New.
1612 (mcf52223_ctrl): New.
1613 (m68k_cpus): Add 5253, 52221, 52223.
1615 * config/m68k-parse.h (RAMBAR_ALT): New.
1616 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1617 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1618 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1619 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1620 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1622 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1623 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1624 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
1625 to control register mapping.
1627 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1629 * messages.c (as_internal_value_out_of_range): Fix typo in
1630 error message. Return after printing domain error.
1631 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1632 in max when shifting right.
1634 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1636 * messages.c (as_internal_value_out_of_range): Extend to report
1637 errors for values with invalid low bits set.
1638 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1639 fields. Check that operands and opcode fields are disjoint.
1640 (ppc_insert_operand): Check operands using mask rather than bit
1641 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
1643 (md_apply_fix): Adjust for struct powerpc_operand change.
1645 2007-04-19 Paul Brook <paul@codesourcery.com>
1647 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1648 Thumb-1. Add sanity check for bogus relaxations.
1650 2007-04-19 Paul Brook <paul@codesourcery.com>
1652 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1654 2007-04-19 Alan Modra <amodra@bigpond.net.au>
1656 * Makefile.am: Run "make dep-am".
1657 * Makefile.in: Regenerate.
1659 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
1661 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1663 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1665 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1667 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1669 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1670 (match_template): Handle operand size for crc32 in SSE4.2.
1671 (process_suffix): Handle operand type for crc32 in SSE4.2.
1672 (output_insn): Support SSE4.2.
1674 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1676 * config/tc-i386.c (cpu_arch): Add .sse4.1.
1677 (process_operands): Adjust implicit operand for blendvpd,
1678 blendvps and pblendvb in SSE4.1.
1679 (output_insn): Support SSE4.1.
1681 2007-04-18 Paul Brook <paul@codesourcery.com>
1683 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1685 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1687 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
1688 of as_warn_where for misaligned data.
1690 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1692 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1695 2007-04-14 Steve Ellcey <sje@cup.hp.com>
1697 * Makefile.am: Add ACLOCAL_AMFLAGS.
1698 * Makefile.in: Regenerate.
1700 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1702 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1703 (sh_optimize_expr): Likewise.
1704 * config/tc-sh.h (md_optimize_expr): Define.
1705 (sh_optimize_expr): Prototype.
1707 2007-04-06 Matt Thomas <matt@netbsd.org>
1709 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1710 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
1711 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
1713 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
1715 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1717 2007-04-04 Paul Brook <paul@codesourcery.com>
1719 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1720 (insns): Use I15 for vext.
1722 2007-04-04 Paul Brook <paul@codesourcery.com>
1724 * configure.tgt: Loosen checks for arm uclinux eabi targets.
1726 2007-04-02 Sterling Augustine <sterling@tensilica.com>
1728 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1729 outputting_stabs_line_debug.
1731 2007-03-26 Anatoly Sokolov <aesok@post.ru>
1733 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1734 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1736 * doc/c-avr.texi: Document new devices.
1738 2007-04-02 Richard Sandiford <richard@codesourcery.com>
1740 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1741 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1742 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1744 2007-03-30 Sterling Augustine <sterling@tensilica.com>
1745 Bob Wilson <bob.wilson@acm.org>
1747 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1748 Do not check is_loop_target flag.
1749 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1750 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
1751 xtensa_move_labels for alignment of loop opcodes.
1753 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
1755 * config/tc-i386.c (process_suffix): Reindent a bit.
1757 2007-03-30 Paul Brook <paul@codesourcery.com>
1759 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1760 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
1761 (do_t_push_pop): Use encode_thumb2_ldmstm.
1763 2007-03-29 DJ Delorie <dj@redhat.com>
1765 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1766 (md_relax_table): Add entries for ADJNZ macros.
1767 (M32C_Macros): Add ADJNZ macros.
1768 (subtype_mappings): Add entries for ADJNZ macros.
1769 (insn_to_subtype): Check for adjnz and sbjnz insns.
1770 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1771 (md_convert_frag): Convert adjnz and sbjnz.
1773 2007-03-29 Nick Clifton <nickc@redhat.com>
1775 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1777 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1778 using ITBL_NUMBER_OF_PROCESSORS.
1779 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1781 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1783 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1784 register operands, encode destination in i.rm.regmem if its
1787 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1788 Phil Edwards <phil@codesourcery.com>
1790 * doc/as.texinfo: Put the contents after the title page rather
1791 than at the end of the document.
1793 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1795 * NEWS: Mention ".reloc".
1797 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1799 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1800 in FLIX instructions.
1802 2007-03-26 Julian Brown <julian@codesourcery.com>
1804 * config/tc-arm.c (arm_it): Add immisfloat field.
1805 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1806 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1807 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1809 (neon_cmode_for_move_imm): Reject non-float immediates for float
1811 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1813 2007-03-26 Julian Brown <julian@codesourcery.com>
1815 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1817 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1819 * doc/as.texinfo (Reloc): Document.
1820 * read.c (potable): Add "reloc".
1821 (s_reloc): New function.
1822 * write.c (reloc_list): New global var.
1823 (resolve_reloc_expr_symbols): New function.
1824 (write_object_file): Call it.
1825 (write_relocs): Process reloc_list.
1826 * write.h (struct reloc_list): New.
1827 (reloc_list): Declare.
1829 2007-03-24 Paul Brook <paul@codesourcery.com>
1831 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1833 2007-03-24 Paul Brook <paul@codesourcery.com>
1834 Mark Shinwell <shinwell@codesourcery.com>
1836 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1837 (parse_operands): Don't expect comma if first operand missing.
1839 (do_srs): Encode register number, checking it is r13. Update comment.
1840 (insns): Update SRS entries to take a register.
1842 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1844 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1846 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1848 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1849 attempt to jump to the next instruction into NOPs.
1851 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1853 * config/tc-spu.c: Don't include opcode/spu.h.
1854 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1855 (md_apply_fix): Adjust.
1856 * config/tc-spu.h: Include opcode/spu.h.
1857 (struct tc_fix_info): New.
1858 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1859 (TC_FORCE_RELOCATION): Define.
1861 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1863 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1865 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1867 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1868 xchg for xchg %rax,%rax.
1870 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1872 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1873 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1875 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1878 * config/tc-i386.c (match_template): Properly handle 64bit mode
1881 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1884 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1886 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1888 * Makefile.am: Run dep-am.
1889 * Makefile.in: Regenerated.
1891 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1893 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1894 (NOP_OPCODE): Removed.
1895 (template): Likewise.
1897 2007-03-21 Andreas Schwab <schwab@suse.de>
1899 * config/tc-i386.h (NOP_OPCODE): Restore.
1901 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1903 * config/tc-arm.c (do_mul): Don't warn about overlapping
1904 Rd and Rm operands when assembling for v6 or above.
1905 Correctly capitalize register names in the messages.
1906 (do_mlas): Likewise. Delete spurious blank line.
1908 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1910 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1912 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1914 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1916 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1919 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1922 * app.c (do_scrub_chars): PUT after setting states.
1924 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1926 * Makefile.am: Run "make dep-am".
1927 * Makefile.in: Regenerated.
1929 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1931 (md_begin): Check reg_name != NULL for the last entry in
1934 * config/tc-i386.h: Move many entries to opcode/i386.h and
1937 * configure.in (need_opcodes): Set true for i386.
1938 * configure: Regenerated.
1940 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1942 * Makefile.am (REPORT_BUGS_TO): Removed.
1943 (INCLUDES): Remove -DREPORT_BUGS_TO.
1944 * Makefile.in: Regenerated.
1946 * configure.in (--with-bugurl): Removed.
1947 * configure: Regenerated.
1949 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1950 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1951 (TEXI2DVI): Likewise.
1952 (gasver.texi): Removed.
1953 (MOSTLYCLEANFILES): Remove gasver.texi.
1954 (as.1): Don't depend on gasver.texi.
1955 * doc/Makefile.in: Regenerated.
1957 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1959 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1961 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1962 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1963 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1964 * gas/symbols.c (copy_symbol_attributes): Use
1965 TC_COPY_SYMBOL_ATTRIBUTES.
1967 2007-03-14 Paul Brook <paul@codesourcery.com>
1969 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1971 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1974 * write.c (relax_segment): Insert extra alignment padding
1975 to break infinite relax loop when given impossible
1976 gcc_except_table assembly.
1978 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1980 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1981 on i.tm.base_opcode.
1982 (match_template): Likewise.
1983 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1985 * config/tc-i386.h (Opcode_D): New.
1986 (Opcode_FloatR): Likewise.
1987 (Opcode_FloatD): Likewise.
1990 (FloatMF): Likewise.
1994 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1996 * app.c (do_scrub_chars): Recognize comments after # line "file".
1997 * read.c (get_linefile_number): New.
1998 (s_app_line): Accept ill-formed .linefile lines as comments.
2000 2007-03-09 Alan Modra <amodra@bigpond.net.au>
2002 * config/tc-i386.h (WORKING_DOT_WORD): Define.
2004 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
2006 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
2007 * as.h (new_logical_line_flags): New.
2008 * input-scrub.c (new_logical_line): Turned into wrapper for...
2009 (new_logical_line_flags): this. Handle flags.
2010 * read.c (potable): Add linefile. Adjust appline argument.
2011 (s_app_file): Fake .appfiles no more.
2012 (s_app_line): For .linefile, accept file name and flags.
2014 2007-03-08 Alan Modra <amodra@bigpond.net.au>
2016 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
2018 2007-03-08 Alan Modra <amodra@bigpond.net.au>
2020 * Makefile.am: Run "make dep-am".
2021 * Makefile.in: Regenerate.
2022 * po/POTFILES.in: Regenerate.
2024 2007-03-07 Joseph Myers <joseph@codesourcery.com>
2026 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
2028 * doc/Makefile.am (gasver.texi): Define BUGURL.
2029 * doc/as.texinfo: Use BUGURL.
2030 * Makefile.in, configure, doc/Makefile.in: Regenerate.
2032 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
2034 * config/tc-s390.c (md_parse_option): z9-ec option added.
2036 2007-03-02 Paul Brook <paul@codesourcery.com>
2038 * config/tc-arm.c (relax_immediate): Always return positive values.
2039 (relaxed_symbol_addr): New function.
2040 (relax_adr, relax_branch): Use it.
2041 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
2043 2007-03-01 Joseph Myers <joseph@codesourcery.com>
2045 * as.c (parse_args): Update copyright date.
2047 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
2049 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
2051 2007-02-28 Nick Clifton <nickc@redhat.com>
2054 * config/tc-d10v.c (do_assemble): Do not generate error messages,
2055 just return -1 whenever a problem is encountered.
2056 (md_assemble): If do_assemble returns -1 generate a non-fatal
2057 error message and return.
2060 * config/tc-msp430.c (line_separator_char): Change to '{'.
2062 2007-02-27 Alan Modra <amodra@bigpond.net.au>
2064 * config/tc-m68hc11.c (fixup24): Correct fixup size.
2065 (build_jump_insn): Likewise.
2066 (build_insn): Likewise.
2067 (s_m68hc11_relax): Likewise.
2069 2007-02-27 Alan Modra <amodra@bigpond.net.au>
2071 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
2073 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
2075 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
2077 2007-02-23 Alan Modra <amodra@bigpond.net.au>
2079 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
2080 (md_assemble): Likewise.
2082 2007-02-22 Alan Modra <amodra@bigpond.net.au>
2084 * write.c (size_seg): Always clear SEC_RELOC here.
2085 (install_reloc): New function, extracted from..
2086 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
2087 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
2088 testing frag size. Set SEC_RELOC here.
2090 2007-02-21 Alan Modra <amodra@bigpond.net.au>
2093 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
2095 2007-02-20 Thiemo Seufer <ths@mips.com>
2097 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
2099 2007-02-20 Thiemo Seufer <ths@mips.com>
2101 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
2103 2007-02-20 Thiemo Seufer <ths@mips.com>
2104 Chao-Ying Fu <fu@mips.com>
2106 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
2107 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
2108 (macro_build): Add case '2'.
2109 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
2110 (validate_mips_insn): Add support for balign instruction.
2111 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
2112 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
2113 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
2114 command line options.
2115 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
2116 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
2117 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
2118 .set dspr2, .set nodspr2.
2120 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
2122 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
2123 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
2125 2007-02-18 Alan Modra <amodra@bigpond.net.au>
2127 * write.c (TC_FX_SIZE_SLACK): Define.
2128 (write_relocs): Reinstate check for fixup within frag.
2129 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
2130 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
2131 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
2132 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
2133 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
2135 2007-02-17 Mark Mitchell <mark@codesourcery.com>
2136 Nathan Sidwell <nathan@codesourcery.com>
2137 Vladimir Prus <vladimir@codesourcery.com
2138 Joseph Myers <joseph@codesourcery.com>
2140 * configure.in (--with-bugurl): New option.
2141 * configure: Regenerate.
2142 * dep-in.sed: Remove bin-bugs.h.
2143 * Makefile.am (REPORT_BUGS_TO): Define.
2144 (INCLUDES): Define REPORT_BUGS_TO.
2145 (DEP_INCLUDES): Likewise.
2146 ($(OBJS)): No longer depend on bin-bugs.h.
2147 * Makefile.in: Regenerate.
2148 * doc/Makefile.in: Regenerate.
2149 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
2150 * as.h: Remove include of bin-bugs.h.
2152 2007-02-17 Alan Modra <amodra@bigpond.net.au>
2154 * write.c: White space fixes.
2155 (fixup_segment): Move symbol_mri_common_p adjustments..
2156 (write_relocs): ..and symbol_equated_reloc_p adjustments..
2157 (adjust_reloc_syms): ..to here.
2159 2007-02-16 Alan Modra <amodra@bigpond.net.au>
2161 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
2162 xmalloc, memset. Don't bother assigning NULL to known zero mem.
2163 (subseg_set_rest): Remove unnecessary cast.
2164 * write.c: Include libbfd.h. Replace PTR with void * throughout.
2165 Remove unnecessary forward declarations and casts.
2166 (set_symtab): Delete extern bfd_alloc.
2167 (fixup_segment): Move.
2169 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
2171 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
2172 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
2173 (mcf5475_ctrl, mcf5485_ctrl): New.
2174 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
2175 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
2176 (init_table): Add asid, mmubar, adjust rombar0.
2178 2007-02-14 Alan Modra <amodra@bigpond.net.au>
2180 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
2181 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
2182 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
2183 code, and test for these insns using a combination of
2184 opcode_modifier and operand_types.
2186 2007-02-07 Paul Brook <paul@codesourcery.com>
2188 * configure.tgt: Add arm*-*-uclinux-*eabi.
2190 2007-02-05 Dave Brolley <brolley@redhat.com>
2191 Richard Sandiford <rsandifo@redhat.com>
2192 DJ Delorie <dj@redhat.com>
2193 Stan Cox <scox@redhat.com>
2194 Jim Blandy <jimb@redhat.com>
2195 Nick Clifton <nickc@redhat.com>
2196 Jim Wilson <wilson@redhat.com>
2197 Frank Ch. Eigler <fche@redhat.com>
2198 Graydon Hoare <graydon@redhat.com>
2199 Ben Elliston <bje@redhat.com>
2200 John Healy <jhealy@redhat.com>
2201 Richard Henderson <rth@redhat.com>
2203 * Makefile.am (CPU_TYPES): Add mep.
2204 (TARGET_CPU_CFILES): Add tc-mep.c.
2205 (TARGET_CPU_HFILES): Add tc-mep.h.
2206 (DEPTC_mep_elf): New variable.
2207 (DEPTC_mep_coff): Likewise.
2208 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
2209 * configure.in: Support mep.
2210 * configure.tgt: Likewise.
2211 * config/tc-mep.c: New file.
2212 * config/obj-elf.c: New file.
2213 * config/tc-mep.c: New file.
2214 * config/tc-mep.h: New file.
2215 * testsuite/gas/mep: New testsuite with content.
2216 * Makefile.in: Regenerate.
2217 * configure: Regenerate.
2219 2007-02-05 Dave Brolley <brolley@redhat.com>
2221 * cgen.c (gas_cgen_install_complex_reloc): Removed.
2222 (complex_reloc_installation_howto): Removed.
2224 2007-02-05 Dave Brolley <brolley@redhat.com>
2225 Graydon Hoare <graydon@redhat.com>
2226 DJ Delorie <dj@redhat.com>
2227 Catherine Moore <clm@redhat.com>
2228 Michael Chastain <chastain@redhat.com>
2229 Frank Ch. Eigler <fche@redhat.com>
2231 * symbols.c (use_complex_relocs_for): New, to decide
2232 when to use complex relocs. Add signed RELC support.
2233 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
2234 encode expression symbols as mangled complex relocation symbols (when
2235 compiled with -DOBJ_COMPLEX_RELOC).
2236 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
2237 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
2238 encode_addend with new args. Modify to get start, length from
2239 ifield whenever it is set. Also change condition on which
2240 self-describing relocs are encoded. Add hook into
2241 gas_cgen_encode_addend.
2242 (queue_fixup_recursively): Add signed RELC support. Change from masked
2243 expr to trunc flag. Restore assignment of sub-field value to
2244 temporary in fixups array. Reflect changed meaning of last arg to
2245 queue_fixup_recursively.
2246 (fixup): Add cgen_maybe_multi_ifield member.
2247 (make_right_shifted_expr): New function.
2248 (queue_fixup): Change to recursive function that fragments
2249 fixups if operand has a multi-ifield.
2250 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
2251 symbols, call weak_operand_overflow_check, and fragment call
2252 queue_fixup with operand fields.
2253 (gas_cgen_finish_insn) Modify to manage ifield pointer.
2254 (weak_operand_overflow_check): New function to try to select
2256 (gas_cgen_encode_addend): New function for relc.
2257 (gas_cgen_install_complex_reloc): Likewise.
2258 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
2259 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
2260 cgen_maybe_multi_ifield field to fx_cgen substructure.
2261 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
2262 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
2264 2007-02-03 DJ Delorie <dj@delorie.com>
2266 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
2268 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
2269 (m32c_cons_fix_new): Prototype.
2271 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2273 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
2274 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
2276 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2278 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
2279 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
2280 (map_suffix_reloc_to_operator): New.
2281 (map_operator_to_reloc): New.
2282 (expression_maybe_register): Fix incorrect test of return value from
2283 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
2284 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
2286 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2288 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
2289 (tinsn_get_tok): Delete prototype.
2290 * config/tc-xtensa.c (tinsn_get_tok): Delete.
2292 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2294 * config/xtensa-relax.h (struct build_instr): Delete id field.
2295 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
2297 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
2298 set op_data fields to zero.
2299 (parse_id_constant): Delete.
2300 (build_transition): Remove code to handle numbered literals and labels.
2302 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2304 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
2305 (build_transition_table): Likewise.
2307 2007-02-01 Bob Wilson <bob.wilson@acm.org>
2309 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
2311 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
2313 2007-02-02 Alan Modra <amodra@bigpond.net.au>
2315 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
2316 (struct fix <fx_plt>): Rename to tcbit2.
2317 * write.c (fix_new_internal): Adjust.
2318 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2319 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2320 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2321 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2322 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2323 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2324 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2325 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2326 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
2327 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
2328 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2329 Instead, compare fx_r_type.
2330 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
2331 fx_tcbit in place of fx_plt.
2332 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
2333 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
2336 2007-01-30 Nick Clifton <nickc@redhat.com>
2338 * as.c (main): Mark symbols created via the --defsym command line
2339 option as volatile so that they can be overridden later on by a
2340 .set directive. This maintains compatibility with the behaviour
2341 of earlier versions of the assembler.
2342 * doc/as.texinfo (--defsym): Document that the defined symbol's
2343 value can be overridden via a .set directive.
2345 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
2347 * config/tc-i386.c (swap_imm_operands): Renamed to ...
2348 (swap_2_operands): This. Take 2 ints.
2349 (md_assemble): Updated.
2350 (swap_operands): Call swap_2_operands to swap 2 operands.
2352 2007-01-24 DJ Delorie <dj@redhat.com>
2354 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
2356 2007-01-22 Nick Clifton <nickc@redhat.com>
2359 * tc-score.c: Remove unnecessary uses of _().
2360 Make the err_msg[] a file level local array in order to save
2362 Remove unnecessary sprintf()s.
2364 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
2367 * config/tc-score.c : Using _() for const string.
2368 Do not assign inst.error with a local string pointer.
2369 (md_section_align): Pad section.
2371 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
2373 * config/tc-i386.c (build_modrm_byte): Check number of operands
2374 when procssing memory/register operand.
2376 2007-01-12 Nick Clifton <nickc@redhat.com>
2379 * macro.c (expand_irp): Do not ignore spaces inside quoted
2382 2007-01-12 Alan Modra <amodra@bigpond.net.au>
2384 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2385 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2386 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2387 (TC_FORCE_RELOCATION): Define.
2388 (TC_FORCE_RELOCATION_LOCAL): Define.
2389 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2391 2007-01-12 Alan Modra <amodra@bigpond.net.au>
2393 * input-file.c (input_file_open): Check fgets return.
2395 2007-01-11 Paul Brook <paul@codesourcery.com>
2397 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2399 2007-01-11 Nick Clifton <nickc@redhat.com>
2402 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2405 * config/tc-mcore.c (md_number_to_chars): Use
2406 number_to_chars_{big|little}endian.
2408 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
2410 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2411 architecture by itself.
2412 (m68k_ip): Don't issue a warning for tbl instructions on fido.
2413 (m68k_elf_final_processing): Treat Fido as an architecture by
2416 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
2418 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2420 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
2422 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2423 depending on allow_naked_reg.
2425 2007-01-04 Paul Brook <paul@codesourcery.com>
2427 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2429 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
2432 * config/tc-i386.c (register_prefix): New.
2433 (set_intel_syntax): Set set_intel_syntax to "" if register
2434 prefix isn't needed.
2435 (check_byte_reg): Use register_prefix for error message.
2436 (check_long_reg): Likewise.
2437 (check_qword_reg): Likewise.
2438 (check_word_reg): Likewise.
2440 2007-01-04 Julian Brown <julian@codesourcery.com>
2442 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2443 (do_neon_qshl_imm): Likewise.
2444 (do_neon_rshl): New function. Handle rounding variants of
2445 v{q}shl-by-register.
2446 (insns): Use do_neon_rshl for vrshl, vqrshl.
2448 2007-01-04 Paul Brook <paul@codesourcery.com>
2450 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2453 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2455 * config/tc-i386.c (swap_operands): Remove branches.
2457 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2459 * config/tc-i386.c: Update copyright year.
2460 * config/tc-i386.h: Likewise.
2462 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2464 * config/tc-i386.c (smallest_imm_type): Return unsigned int
2467 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2469 * config/tc-i386.c: Convert to ISO C90 formatting
2470 * config/tc-i386.h: Likewise.
2472 2007-01-03 David Daney <ddaney@avtrex.com>
2474 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
2477 For older changes see ChangeLog-2006
2483 version-control: never