* config/tc-i386.c: Formatting.
[deliverable/binutils-gdb.git] / gas / ChangeLog
1 2006-04-18 Alan Modra <amodra@bigpond.net.au>
2
3 * config/tc-i386.c: Formatting.
4 (output_disp, output_imm): ISO C90 params.
5
6 * frags.c (frag_offset_fixed_p): Constify args.
7 * frags.h (frag_offset_fixed_p): Ditto.
8
9 * config/tc-dlx.h (tc_coff_symbol_emit_hook): Delete.
10 (COFF_MAGIC): Delete.
11
12 * config/tc-xc16x.h (TC_LINKRELAX_FIXUP): Delete.
13
14 2006-04-16 Daniel Jacobowitz <dan@codesourcery.com>
15
16 * po/POTFILES.in: Regenerated.
17
18 2006-04-16 Mark Mitchell <mark@codesourcery.com>
19
20 * doc/as.texinfo: Mention that some .type syntaxes are not
21 supported on all architectures.
22
23 2006-04-14 Sterling Augustine <sterling@tensilica.com>
24
25 * config/tc-xtensa.c (emit_single_op): Do not relax MOVI
26 instructions when such transformations have been disabled.
27
28 2006-04-10 Sterling Augustine <sterling@tensilica.com>
29
30 * config/tc-xtensa.c (xg_assemble_vliw_tokens): Record loop target
31 symbols in RELAX[_CHECK]_ALIGN_NEXT_OPCODE frags.
32 (xtensa_fix_close_loop_end_frags): Use the recorded values instead of
33 decoding the loop instructions. Remove current_offset variable.
34 (xtensa_fix_short_loop_frags): Likewise.
35 (min_bytes_to_other_loop_end): Remove current_offset argument.
36
37 2006-04-09 Arnold Metselaar <arnold.metselaar@planet.nl>
38
39 * config/tc-z80.c (z80_optimize_expr): Removed.
40 * config/tc-z80.h (z80_optimize_expr, md_optimize_expr): Removed.
41
42 2006-04-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
43
44 * gas/config/tc-avr.c (mcu_types): Add support for attiny261,
45 attiny461, attiny861, attiny25, attiny45, attiny85,attiny24,
46 attiny44, attiny84, at90pwm2, at90pwm3, atmega164, atmega324,
47 atmega644, atmega329, atmega3290, atmega649, atmega6490,
48 atmega406, atmega640, atmega1280, atmega1281, at90can32,
49 at90can64, at90usb646, at90usb647, at90usb1286 and
50 at90usb1287.
51 Move atmega48 and atmega88 from AVR_ISA_M8 to AVR_ISA_PWMx.
52
53 2006-04-07 Paul Brook <paul@codesourcery.com>
54
55 * config/tc-arm.c (parse_operands): Set default error message.
56
57 2006-04-07 Paul Brook <paul@codesourcery.com>
58
59 * config/tc-arm.c (parse_tb): Set inst.error before returning FAIL.
60
61 2006-04-07 Paul Brook <paul@codesourcery.com>
62
63 * config/tc-arm.c (md_apply_fix): Set H bit on blx instruction.
64
65 2006-04-07 Paul Brook <paul@codesourcery.com>
66
67 * config/tc-arm.c (THUMB2_LOAD_BIT): Define.
68 (move_or_literal_pool): Handle Thumb-2 instructions.
69 (do_t_ldst): Call move_or_literal_pool for =N addressing modes.
70
71 2006-04-07 Alan Modra <amodra@bigpond.net.au>
72
73 PR 2512.
74 * config/tc-i386.c (match_template): Move 64-bit operand tests
75 inside loop.
76
77 2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
78
79 * po/Make-in: Add install-html target.
80 * Makefile.am: Add install-html and install-html-recursive targets.
81 * Makefile.in: Regenerate.
82 * configure.in: AC_SUBST datarootdir, docdir, htmldir.
83 * configure: Regenerate.
84 * doc/Makefile.am: Add install-html and install-html-am targets.
85 * doc/Makefile.in: Regenerate.
86
87 2006-04-06 Alan Modra <amodra@bigpond.net.au>
88
89 * frags.c (frag_offset_fixed_p): Reinitialise offset before
90 second scan.
91
92 2006-04-05 Richard Sandiford <richard@codesourcery.com>
93 Daniel Jacobowitz <dan@codesourcery.com>
94
95 * config/tc-sparc.c (sparc_target_format): Handle TE_VXWORKS.
96 (GOTT_BASE, GOTT_INDEX): New.
97 (tc_gen_reloc): Don't alter relocations against GOTT_BASE and
98 GOTT_INDEX when generating VxWorks PIC.
99 * configure.tgt (sparc*-*-vxworks*): Remove this special case;
100 use the generic *-*-vxworks* stanza instead.
101
102 2006-04-04 Alan Modra <amodra@bigpond.net.au>
103
104 PR 997
105 * frags.c (frag_offset_fixed_p): New function.
106 * frags.h (frag_offset_fixed_p): Declare.
107 * expr.c (expr): Use frag_offset_fixed_p when simplifying subtraction.
108 (resolve_expression): Likewise.
109
110 2006-04-03 Sterling Augustine <sterling@tensilica.com>
111
112 * config/tc-xtensa.c (init_op_placement_info_table): Check for formats
113 of the same length but different numbers of slots.
114
115 2006-03-30 Andreas Schwab <schwab@suse.de>
116
117 * configure.in: Fix help string for --enable-targets option.
118 * configure: Regenerate.
119
120 2006-03-28 Nathan Sidwell <nathan@codesourcery.com>
121
122 * gas/config/tc-m68k.c (find_cf_chip): Merge into ...
123 (m68k_ip): ... here. Use for all chips. Protect against buffer
124 overrun and avoid excessive copying.
125
126 * config/tc-m68k.c (m68000_control_regs, m68010_control_regs,
127 m68020_control_regs, m68040_control_regs, m68060_control_regs,
128 mcf_control_regs, mcf5208_control_regs, mcf5213_control_regs,
129 mcf5329_control_regs, mcf5249_control_regs, mcf528x_control_regs,
130 mcfv4e_control_regs, m68010_control_regs): Rename and reorder to ...
131 (m68000_ctrl, m68010_ctrl, m68020_ctrl, m68040_ctrl, m68060_ctrl,
132 mcf_ctrl, mcf5208_ctrl, mcf5213_ctrl, mcf5235_ctrl, mcf5249_ctrl,
133 mcf5216_ctrl, mcf5250_ctrl, mcf5271_ctrl, mcf5272_ctrl,
134 mcf5282_ctrl, mcfv4e_ctrl): ... these.
135 (mcf5275_ctrl, mcf5329_ctrl, mcf5373_ctrl): New.
136 (struct m68k_cpu): Change chip field to control_regs.
137 (current_chip): Remove.
138 (control_regs): New.
139 (m68k_archs, m68k_extensions): Adjust.
140 (m68k_cpus): Reorder to be in cpu number order. Adjust.
141 (CPU_ALLOW_MC, CPU_ALLOW_NEGATION): Remove.
142 (find_cf_chip): Reimplement for new organization of cpu table.
143 (select_control_regs): Remove.
144 (mri_chip): Adjust.
145 (struct save_opts): Save control regs, not chip.
146 (s_save, s_restore): Adjust.
147 (m68k_lookup_cpu): Give deprecated warning when necessary.
148 (m68k_init_arch): Adjust.
149 (md_show_usage): Adjust for new cpu table organization.
150
151 2006-03-25 Bernd Schmidt <bernd.schmidt@analog.com>
152
153 * config/bfin-defs.h (Expr_Node_Type enum): Add Expr_Node_GOT_Reloc.
154 * config/bfin-lex.l: Recognize GOT17M4 and FUNCDESC_GOT17M4.
155 * config/bfin-parse.y: Include "libbfd.h", "elf/common.h" and
156 "elf/bfin.h".
157 (GOT17M4, FUNCDESC_GOT17M4): New tokens of type <value>.
158 (any_gotrel): New rule.
159 (got): Use it, and create Expr_Node_GOT_Reloc nodes.
160 * config/tc-bfin.c: Include "libbfd.h", "elf/common.h" and
161 "elf/bfin.h".
162 (DEFAULT_FLAGS, bfin_flags, bfin_pic_flag): New.
163 (bfin_pic_ptr): New function.
164 (md_pseudo_table): Add it for ".picptr".
165 (OPTION_FDPIC): New macro.
166 (md_longopts): Add -mfdpic.
167 (md_parse_option): Handle it.
168 (md_begin): Set BFD flags.
169 (md_apply_fix3, bfin_fix_adjustable): Handle new relocs.
170 (bfin_gen_ldstidxi): Adjust to match the trees that the parser gives
171 us for GOT relocs.
172 * Makefile.am (bfin-parse.o): Update dependencies.
173 (DEPTC_bfin_elf): Likewise.
174 * Makefile.in: Regenerate.
175
176 2006-03-25 Richard Sandiford <richard@codesourcery.com>
177
178 * config/tc-m68k.c (m68k_cpus): Change cpu_cf5208 entries to use
179 mcfemac instead of mcfmac.
180
181 2006-03-22 Richard Sandiford <richard@codesourcery.com>
182 Daniel Jacobowitz <dan@codesourcery.com>
183 Phil Edwards <phil@codesourcery.com>
184 Zack Weinberg <zack@codesourcery.com>
185 Mark Mitchell <mark@codesourcery.com>
186 Nathan Sidwell <nathan@codesourcery.com>
187
188 * config/tc-mips.c (mips_target_format): Handle vxworks targets.
189 (md_begin): Complain about -G being used for PIC. Don't change
190 the text, data and bss alignments on VxWorks.
191 (reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
192 generating VxWorks PIC.
193 (load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
194 (macro): Likewise, but do not treat la $25 specially for
195 VxWorks PIC, and do not handle jal.
196 (OPTION_MVXWORKS_PIC): New macro.
197 (md_longopts): Add -mvxworks-pic.
198 (md_parse_option): Don't complain about using PIC and -G together here.
199 Handle OPTION_MVXWORKS_PIC.
200 (md_estimate_size_before_relax): Always use the first relaxation
201 sequence on VxWorks.
202 * config/tc-mips.h (VXWORKS_PIC): New.
203
204 2006-03-21 Paul Brook <paul@codesourcery.com>
205
206 * config/tc-arm.c (md_apply_fix): Fix typo in offset mask.
207
208 2006-03-21 Sterling Augustine <sterling@tensilica.com>
209
210 * config/tc-xtensa.c (enforce_three_byte_loop_align): New flag.
211 (xtensa_setup_hw_workarounds): Set this new flag for older hardware.
212 (get_loop_align_size): New.
213 (xtensa_end): Skip xtensa_mark_narrow_branches when not aligning.
214 (xtensa_mark_zcl_first_insns): Prevent widening of first loop frag.
215 (get_text_align_power): Rewrite to handle inputs in the range 2-8.
216 (get_noop_aligned_address): Use get_loop_align_size.
217 (get_aligned_diff): Likewise.
218
219 2006-03-21 Paul Brook <paul@codesourcery.com>
220
221 * config/tc-arm.c (insns): Correct opcodes for ldrbt and strbt.
222
223 2006-03-20 Paul Brook <paul@codesourcery.com>
224
225 * config/tc-arm.c (BAD_BRANCH, BAD_NOT_IT): Define.
226 (do_t_branch): Encode branches inside IT blocks as unconditional.
227 (do_t_cps): New function.
228 (do_t_blx, do_t_bkpt, do_t_branch23, do_t_bx, do_t_bxj, do_t_cpsi,
229 do_t_czb, do_t_it, do_t_setend, do_t_tb): Add IT constaints.
230 (opcode_lookup): Allow conditional suffixes on all instructions in
231 Thumb mode.
232 (md_assemble): Advance condexec state before checking for errors.
233 (insns): Use do_t_cps.
234
235 2006-03-20 Paul Brook <paul@codesourcery.com>
236
237 * config/tc-arm.c (output_relax_insn): Call dwarf2_emit_insn before
238 outputting the insn.
239
240 2006-03-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
241
242 * config/tc-vax.c: Update copyright year.
243 * config/tc-vax.h: Likewise.
244
245 2006-03-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
246
247 * config/tc-vax.c (md_chars_to_number): Used only locally, so
248 make it static.
249 * config/tc-vax.h (md_chars_to_number): Remove obsolete declaration.
250
251 2006-03-17 Paul Brook <paul@codesourcery.com>
252
253 * config/tc-arm.c (insns): Add ldm and stm.
254
255 2006-03-17 Ben Elliston <bje@au.ibm.com>
256
257 PR gas/2446
258 * doc/as.texinfo (Ident): Document this directive more thoroughly.
259
260 2006-03-16 Paul Brook <paul@codesourcery.com>
261
262 * config/tc-arm.c (insns): Add "svc".
263
264 2006-03-13 Bob Wilson <bob.wilson@acm.org>
265
266 * config/tc-xtensa.c (xg_translate_sysreg_op): Remove has_underbar
267 flag and avoid double underscore prefixes.
268
269 2006-03-10 Paul Brook <paul@codesourcery.com>
270
271 * config/tc-arm.c (md_begin): Handle EABIv5.
272 (arm_eabis): Add EF_ARM_EABI_VER5.
273 * doc/c-arm.texi: Document -meabi=5.
274
275 2006-03-10 Ben Elliston <bje@au.ibm.com>
276
277 * app.c (do_scrub_chars): Simplify string handling.
278
279 2006-03-07 Richard Sandiford <richard@codesourcery.com>
280 Daniel Jacobowitz <dan@codesourcery.com>
281 Zack Weinberg <zack@codesourcery.com>
282 Nathan Sidwell <nathan@codesourcery.com>
283 Paul Brook <paul@codesourcery.com>
284 Ricardo Anguiano <anguiano@codesourcery.com>
285 Phil Edwards <phil@codesourcery.com>
286
287 * config/tc-arm.c (md_apply_fix): Install a value of zero into a
288 BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA
289 R_ARM_ABS12 reloc.
290 (tc_gen_reloc): Keep the original fx_offset for RELA pc-relative
291 relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12
292 relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets.
293
294 2006-03-06 Bob Wilson <bob.wilson@acm.org>
295
296 * config/tc-xtensa.c (xtensa_post_relax_hook): Generate literal tables
297 even when using the text-section-literals option.
298
299 2006-03-06 Nathan Sidwell <nathan@codesourcery.com>
300
301 * config/tc-m68k.c (m68k_extensions): Allow 'float' on both m68k
302 and cf.
303 (m68k_ip): <case 'J'> Check we have some control regs.
304 (md_parse_option): Allow raw arch switch.
305 (m68k_init_arch): Better detection of arch/cpu mismatch. Detect
306 whether 68881 or cfloat was meant by -mfloat.
307 (md_show_usage): Adjust extension display.
308 (m68k_elf_final_processing): Adjust.
309
310 2006-03-03 Bjoern Haase <bjoern.m.haase@web.de>
311
312 * config/tc-avr.c (avr_mod_hash_value): New function.
313 (md_apply_fix, exp_mod): Use BFD_RELOC_HH8_LDI and
314 BFD_RELOC_MS8_LDI for hlo8() and hhi8()
315 (md_begin): Set linkrelax variable to 1, use avr_mod_hash_value
316 instead of int avr_ldi_expression: use avr_mod_hash_value instead
317 of (int).
318 (tc_gen_reloc): Handle substractions of symbols, if possible do
319 fixups, abort otherwise.
320 * config/tc-avr.h (TC_LINKRELAX_FIXUP, TC_VALIDATE_FIX,
321 tc_fix_adjustable): Define.
322
323 2006-03-02 James E Wilson <wilson@specifix.com>
324
325 * config/tc-ia64.c (emit_one_bundle): For IA64_OPCODE_LAST, if we
326 change the template, then clear md.slot[curr].end_of_insn_group.
327
328 2006-02-28 Jan Beulich <jbeulich@novell.com>
329
330 * macro.c (get_any_string): Don't insert quotes for <>-quoted input.
331
332 2006-02-28 Jan Beulich <jbeulich@novell.com>
333
334 PR/1070
335 * macro.c (getstring): Don't treat parentheses special anymore.
336 (get_any_string): Don't consider '(' and ')' as quoting anymore.
337 Special-case '(', ')', '[', and ']' when dealing with non-quoting
338 characters.
339
340 2006-02-28 Mat <mat@csail.mit.edu>
341
342 * dwarf2dbg.c (get_filenum): Don't inadvertently decrease files_in_use.
343
344 2006-02-27 Jakub Jelinek <jakub@redhat.com>
345
346 * dw2gencfi.c (struct fde_entry, struct cie_entry): Add signal_frame
347 field.
348 (CFI_signal_frame): Define.
349 (cfi_pseudo_table): Add .cfi_signal_frame.
350 (dot_cfi): Handle CFI_signal_frame.
351 (output_cie): Handle cie->signal_frame.
352 (select_cie_for_fde): Don't share CIE if signal_frame flag is
353 different. Copy signal_frame from FDE to newly created CIE.
354 * doc/as.texinfo: Document .cfi_signal_frame.
355
356 2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
357
358 * doc/Makefile.am: Add html target.
359 * doc/Makefile.in: Regenerate.
360 * po/Make-in: Add html target.
361
362 2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
363
364 * config/tc-i386.c (output_insn): Support Intel Merom New
365 Instructions.
366
367 * config/tc-i386.h (CpuMNI): New.
368 (CpuUnknownFlags): Add CpuMNI.
369
370 2006-02-24 David S. Miller <davem@sunset.davemloft.net>
371
372 * config/tc-sparc.c (priv_reg_table): Add entry for "gl".
373 (hpriv_reg_table): New table for hyperprivileged registers.
374 (sparc_ip): New cases '$' and '%' for wrhpr/rdhpr hyperprivileged
375 register encoding.
376
377 2006-02-24 DJ Delorie <dj@redhat.com>
378
379 * config/tc-m32c.h (md_apply_fix): Define to m32c_apply_fix.
380 (tc_gen_reloc): Don't define.
381 * config/tc-m32c.c (rl_for, relaxable): New convenience macros.
382 (OPTION_LINKRELAX): New.
383 (md_longopts): Add it.
384 (m32c_relax): New.
385 (md_parse_options): Set it.
386 (md_assemble): Emit relaxation relocs as needed.
387 (md_convert_frag): Emit relaxation relocs as needed.
388 (md_cgen_lookup_reloc): Add LAB_8_8 and LAB_8_16.
389 (m32c_apply_fix): New.
390 (tc_gen_reloc): New.
391 (m32c_force_relocation): Force out jump relocs when relaxing.
392 (m32c_fix_adjustable): Return false if relaxing.
393
394 2006-02-24 Paul Brook <paul@codesourcery.com>
395
396 * config/arm/tc-arm.c (arm_ext_v6_notm, arm_ext_div, arm_ext_v7,
397 arm_ext_v7a, arm_ext_v7r, arm_ext_v7m): New variables.
398 (struct asm_barrier_opt): Define.
399 (arm_v7m_psr_hsh, arm_barrier_opt_hsh): New variables.
400 (parse_psr): Accept V7M psr names.
401 (parse_barrier): New function.
402 (enum operand_parse_code): Add OP_oBARRIER.
403 (parse_operands): Implement OP_oBARRIER.
404 (do_barrier): New function.
405 (do_dbg, do_pli, do_t_barrier, do_t_dbg, do_t_div): New functions.
406 (do_t_cpsi): Add V7M restrictions.
407 (do_t_mrs, do_t_msr): Validate V7M variants.
408 (md_assemble): Check for NULL variants.
409 (v7m_psrs, barrier_opt_names): New tables.
410 (insns): Add V7 instructions. Mark V6 instructions absent from V7M.
411 (md_begin): Initialize arm_v7m_psr_hsh and arm_barrier_opt_hsh.
412 (arm_cpu_option_table): Add Cortex-M3, R4 and A8.
413 (arm_arch_option_table): Add armv7, armv7a, armv7r and armv7m.
414 (struct cpu_arch_ver_table): Define.
415 (cpu_arch_ver): New.
416 (aeabi_set_public_attributes): Use cpu_arch_ver. Set
417 Tag_CPU_arch_profile.
418 * doc/c-arm.texi: Document new cpu and arch options.
419
420 2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
421
422 * config/tc-ia64.c (operand_match): Handle IA64_OPND_IMMU5b.
423
424 2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
425
426 * config/tc-ia64.c: Update copyright years.
427
428 2006-02-22 H.J. Lu <hongjiu.lu@intel.com>
429
430 * config/tc-ia64.c (specify_resource): Add the rule 17 from
431 SDM 2.2.
432
433 2005-02-22 Paul Brook <paul@codesourcery.com>
434
435 * config/tc-arm.c (do_pld): Remove incorrect write to
436 inst.instruction.
437 (encode_thumb32_addr_mode): Use correct operand.
438
439 2006-02-21 Paul Brook <paul@codesourcery.com>
440
441 * config/tc-arm.c (md_apply_fix): Fix off-by-one errors.
442
443 2006-02-17 Shrirang Khisti <shrirangk@kpitcummins.com>
444 Anil Paranjape <anilp1@kpitcummins.com>
445 Shilin Shakti <shilins@kpitcummins.com>
446
447 * Makefile.am: Add xc16x related entry.
448 * Makefile.in: Regenerate.
449 * configure.in: Added xc16x related entry.
450 * configure: Regenerate.
451 * config/tc-xc16x.h: New file
452 * config/tc-xc16x.c: New file
453 * doc/c-xc16x.texi: New file for xc16x
454 * doc/all.texi: Entry for xc16x
455 * doc/Makefile.texi: Added c-xc16x.texi
456 * NEWS: Announce the support for the new target.
457
458 2006-02-16 Nick Hudson <nick.hudson@dsl.pipex.com>
459
460 * configure.tgt: set emulation for mips-*-netbsd*
461
462 2006-02-14 Jakub Jelinek <jakub@redhat.com>
463
464 * config.in: Rebuilt.
465
466 2006-02-13 Bob Wilson <bob.wilson@acm.org>
467
468 * config/tc-xtensa.c (xg_add_opcode_fix): Number operands starting
469 from 1, not 0, in error messages.
470 (md_assemble): Simplify special-case check for ENTRY instructions.
471 (tinsn_has_invalid_symbolic_operands): Do not include opcode and
472 operand in error message.
473
474 2006-02-13 Joseph S. Myers <joseph@codesourcery.com>
475
476 * configure.tgt (arm-*-linux-gnueabi*): Change to
477 arm-*-linux-*eabi*.
478
479 2006-02-10 Nick Clifton <nickc@redhat.com>
480
481 * config/tc-crx.c (check_range): Ensure that the sign bit of a
482 32-bit value is propagated into the upper bits of a 64-bit long.
483
484 * config/tc-arc.c (init_opcode_tables): Fix cast.
485 (arc_extoper, md_operand): Likewise.
486
487 2006-02-09 David Heine <dlheine@tensilica.com>
488
489 * config/tc-xtensa.c (xg_assembly_relax): Increment steps_taken for
490 each relaxation step.
491
492 2006-02-09 Eric Botcazou <ebotcazou@libertysurf.fr>
493
494 * configure.in (CHECK_DECLS): Add vsnprintf.
495 * configure: Regenerate.
496 * messages.c (errno.h, stdarg.h, varargs.h, va_list): Do not
497 include/declare here, but...
498 * as.h: Move code detecting VARARGS idiom to the top.
499 (errno.h, stdarg.h, varargs.h, va_list): ...here.
500 (vsnprintf): Declare if not already declared.
501
502 2006-02-08 H.J. Lu <hongjiu.lu@intel.com>
503
504 * as.c (close_output_file): New.
505 (main): Register close_output_file with xatexit before
506 dump_statistics. Don't call output_file_close.
507
508 2006-02-07 Nathan Sidwell <nathan@codesourcery.com>
509
510 * config/tc-m68k.c (mcf5208_control_regs, mcf5213_control_regs,
511 mcf5329_control_regs): New.
512 (not_current_architecture, selected_arch, selected_cpu): New.
513 (m68k_archs, m68k_extensions): New.
514 (archs): Renamed to ...
515 (m68k_cpus): ... here. Adjust.
516 (n_arches): Remove.
517 (md_pseudo_table): Add arch and cpu directives.
518 (find_cf_chip, m68k_ip): Adjust table scanning.
519 (no_68851, no_68881): Remove.
520 (md_assemble): Lazily initialize.
521 (select_control_regs): Adjust cpu names. Add 5208, 5213, 5329.
522 (md_init_after_args): Move functionality to m68k_init_arch.
523 (mri_chip): Adjust table scanning.
524 (md_parse_option): Reimplement 'm' processing to add -march & -mcpu
525 options with saner parsing.
526 (m68k_lookup_cpu, m68k_set_arch, m68k_set_cpu, m68k_set_extension,
527 m68k_init_arch): New.
528 (s_m68k_cpu, s_m68k_arch): New.
529 (md_show_usage): Adjust.
530 (m68k_elf_final_processing): Set CF EF flags.
531 * config/tc-m68k.h (m68k_init_after_args): Remove.
532 (tc_init_after_args): Remove.
533 * doc/c-m68k.texi (M68K-Opts): Document -march, -mcpu options.
534 (M68k-Directives): Document .arch and .cpu directives.
535
536 2006-02-05 Arnold Metselaar <arnold.metselaar@planet.nl>
537
538 * config/tc-z80.c (z80_start_line_hook): allow .equ and .defl as
539 synonyms for equ and defl.
540 (z80_cons_fix_new): New function.
541 (emit_byte): Disallow relative jumps to absolute locations.
542 (emit_data): Only handle defb, prototype changed, because defb is
543 now handled as pseudo-op rather than an instruction.
544 (instab): Entries for defb,defw,db,dw moved from here...
545 (md_pseudo_table): ... to here, use generic cons() for defw,dw.
546 Add entries for def24,def32,d24,d32.
547 (md_assemble): Improved error handling.
548 (md_apply_fix): New case BFD_RELOC_24, set fixP->fx_no_overflow to one.
549 * config/tc-z80.h (TC_CONS_FIX_NEW): Define.
550 (z80_cons_fix_new): Declare.
551 * doc/c-z80.texi (defb, db): Mention warning on overflow.
552 (def24,d24,def32,d32): New pseudo-ops.
553
554 2006-02-02 Paul Brook <paul@codesourcery.com>
555
556 * config/tc-arm.c (do_shift): Remove Thumb-1 constraint.
557
558 2005-02-02 Paul Brook <paul@codesourcery.com>
559
560 * config/tc-arm.c (T2_OPCODE_MASK, T2_DATA_OP_SHIFT, T2_OPCODE_AND,
561 T2_OPCODE_BIC, T2_OPCODE_ORR, T2_OPCODE_ORN, T2_OPCODE_EOR,
562 T2_OPCODE_ADD, T2_OPCODE_ADC, T2_OPCODE_SBC, T2_OPCODE_SUB,
563 T2_OPCODE_RSB): Define.
564 (thumb32_negate_data_op): New function.
565 (md_apply_fix): Use it.
566
567 2006-01-31 Bob Wilson <bob.wilson@acm.org>
568
569 * config/xtensa-istack.h (TInsn): Remove record_fix and sub_symbol
570 fields.
571 * config/tc-xtensa.h (xtensa_frag_type): Remove slot_sub_symbols field.
572 * config/tc-xtensa.c (md_apply_fix): Check for unexpected uses of
573 subtracted symbols.
574 (relaxation_requirements): Add pfinish_frag argument and use it to
575 replace setting tinsn->record_fix fields.
576 (xg_assemble_vliw_tokens): Adjust calls to relaxation_requirements
577 and vinsn_to_insnbuf. Remove references to record_fix and
578 slot_sub_symbols fields.
579 (xtensa_mark_narrow_branches): Delete unused code.
580 (is_narrow_branch_guaranteed_in_range): Handle expr that is not just
581 a symbol.
582 (convert_frag_immed): Adjust vinsn_to_insnbuf call and do not set
583 record_fix fields.
584 (tinsn_immed_from_frag): Remove code for handling slot_sub_symbols.
585 (vinsn_to_insnbuf): Change use of record_fixup argument, replacing use
586 of the record_fix field. Simplify error messages for unexpected
587 symbolic operands.
588 (set_expr_symbol_offset_diff): Delete.
589
590 2006-01-31 Paul Brook <paul@codesourcery.com>
591
592 * config/tc-arm.c (arm_reg_parse): Check if reg is non-NULL.
593
594 2006-01-31 Paul Brook <paul@codesourcery.com>
595 Richard Earnshaw <rearnsha@arm.com>
596
597 * config/tc-arm.c: Use arm_feature_set.
598 (arm_ext_*, arm_arch_full, arm_arch_t2, arm_arch_none,
599 arm_cext_iwmmxt, arm_cext_xscale, arm_cext_maverick, fpu_fpa_ext_v1,
600 fpu_fpa_ext_v2, fpu_vfp_ext_v1xd, fpu_vfp_ext_v1, fpu_vfp_ext_v2):
601 New variables.
602 (insns): Use them.
603 (md_atof, opcode_select, opcode_select, md_assemble, md_assemble,
604 md_begin, arm_parse_extension, arm_parse_cpu, arm_parse_arch,
605 arm_parse_fpu, arm_parse_float_abi, aeabi_set_public_attributes,
606 s_arm_cpu, s_arm_arch, s_arm_fpu): Use macros for accessing CPU
607 feature flags.
608 (arm_legacy_option_table, arm_option_cpu_value_table): New types.
609 (arm_opts): Move old cpu/arch options from here...
610 (arm_legacy_opts): ... to here.
611 (md_parse_option): Search arm_legacy_opts.
612 (arm_cpus, arm_archs, arm_extensions, arm_fpus)
613 (arm_float_abis, arm_eabis): Make const.
614
615 2006-01-25 Bob Wilson <bob.wilson@acm.org>
616
617 * config/tc-xtensa.c (md_apply_fix): Set value to zero for PLT relocs.
618
619 2006-01-21 Jie Zhang <jie.zhang@analog.com>
620
621 * config/bfin-parse.y (asm_1): Check value range for 16 bit immediate
622 in load immediate intruction.
623
624 2006-01-21 Jie Zhang <jie.zhang@analog.com>
625
626 * config/bfin-parse.y (value_match): Use correct conversion
627 specifications in template string for __FILE__ and __LINE__.
628 (binary): Ditto.
629 (unary): Ditto.
630
631 2006-01-18 Alexandre Oliva <aoliva@redhat.com>
632
633 Introduce TLS descriptors for i386 and x86_64.
634 * config/tc-i386.c (tc_i386_fix_adjustable): Handle
635 BFD_RELOC_386_TLS_GOTDESC, BFD_RELOC_386_TLS_DESC_CALL,
636 BFD_RELOC_X86_64_GOTPC32_TLSDESC, BFD_RELOC_X86_64_TLSDESC_CALL.
637 (optimize_disp): Emit fix up for BFD_RELOC_386_TLS_DESC_CALL and
638 BFD_RELOC_X86_64_TLSDESC_CALL immediately, and clear the
639 displacement bits.
640 (build_modrm_byte): Set up zero modrm for TLS desc calls.
641 (lex_got): Handle @tlsdesc and @tlscall.
642 (md_apply_fix, tc_gen_reloc): Handle the new relocations.
643
644 2006-01-11 Nick Clifton <nickc@redhat.com>
645
646 Fixes for building on 64-bit hosts:
647 * config/tc-avr.c (mod_index): New union to allow conversion
648 between pointers and integers.
649 (md_begin, avr_ldi_expression): Use it.
650 * config/tc-i370.c (md_assemble): Add cast for argument to print
651 statement.
652 * config/tc-tic54x.c (subsym_substitute): Likewise.
653 * config/tc-mn10200.c (md_assemble): Use a union to convert the
654 opindex field of fr_cgen structure into a pointer so that it can
655 be stored in a frag.
656 * config/tc-mn10300.c (md_assemble): Likewise.
657 * config/tc-frv.c (frv_debug_tomcat): Use %p to print pointer
658 types.
659 * config/tc-v850.c: Replace uses of (int) casts with correct
660 types.
661
662 2006-01-09 H.J. Lu <hongjiu.lu@intel.com>
663
664 PR gas/2117
665 * symbols.c (snapshot_symbol): Don't change a defined symbol.
666
667 2006-01-03 Hans-Peter Nilsson <hp@bitrange.com>
668
669 PR gas/2101
670 * config/tc-mmix.c (mmix_handle_mmixal): Don't treat #[0-9][FB] as
671 a local-label reference.
672
673 For older changes see ChangeLog-2005
674 \f
675 Local Variables:
676 mode: change-log
677 left-margin: 8
678 fill-column: 74
679 version-control: never
680 End:
This page took 0.060632 seconds and 4 git commands to generate.