1 2008-12-23 H.J. Lu <hongjiu.lu@intel.com>
3 * config/tc-i386.c (match_template): Changed to return
4 const template *. Handle i.swap_operand for 3 operands.
5 (build_vex_prefix): Take const template *. Swap operand for
6 2-byte VEX prefix if possible.
7 (md_assemble): Updated.
8 (build_modrm_byte): Handle RegMem bit for SSE2AVX.
10 2008-12-23 Anatoly Sokolov <aesok@post.ru>
12 * config/tc-avr.c (mcu_types): Add attiny87, attiny327, atmega4hvd,
13 atmega8hvd, atmega16hvb, atmega32hvb, atmega64c1, atmega16m1,
14 atmega64m1, atmega32u6, atmega128rfa1, at90pwm81, at90scr100,
15 m3000f, m3000s and m3001b devices.
16 * doc/c-avr.texi: Likewise.
18 2008-12-23 Nick Clifton <nickc@redhat.com>
20 * NEWS :Remove mention of STT_IFUNC support.
21 * config/obj-elf.c (obj_elf_type): Remove STT_IFUNC support.
22 * doc/as.texinfo: Remove mention of STT_IFUNC support.
24 2008-12-21 Hans-Peter Nilsson <hp@axis.com>
26 * config/tc-cris.c (s_cris_dtpoff): New function.
27 (md_pseudo_table): Add "dtpoffd".
29 2008-12-20 H.J. Lu <hongjiu.lu@intel.com>
31 * config/tc-i386.c (parse_insn): Optimize ".s" handling.
33 2008-12-20 H.J. Lu <hongjiu.lu@intel.com>
35 * config/tc-i386.c (_i386_insn): Add swap_operand.
36 (parse_insn): Handle ".s".
37 (match_template): Handle swap_operand.
39 * doc/c-i386.texi: Document .s suffix.
41 2008-12-20 Hans-Peter Nilsson <hp@axis.com>
43 * config/tc-cris.c (cris_process_instruction): Handle
44 BFD_RELOC_CRIS_32_IE, in the test whether the relocation fits.
45 (get_3op_or_dip_prefix_op): Handle TLS/PIC decoration for the
46 "double indirect" addressing mode.
47 (cris_get_reloc_suffix): Add entry for :IE for BFD_RELOC_CRIS_32_IE.
48 (cris_number_to_imm, tc_gen_reloc): Handle BFD_RELOC_CRIS_32_IE.
50 2008-12-18 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
52 * configure: Regenerate.
54 2008-12-08 H.J. Lu <hongjiu.lu@intel.com>
56 * config/tc-i386.c (build_modrm_byte): Remove an extra blank
59 2008-12-04 Ben Elliston <bje@au.ibm.com>
61 * config/tc-ppc.c (parse_cpu): Remove booke64 support. Update
63 (ppc_setup_opcodes): Likewise, remove booke64 support.
64 * doc/c-ppc.texi (PowerPC-Opts): Remove -mbooke32 and -mbooke64.
65 * doc/as.texinfo (Overview): Likewise.
67 2008-12-04 Nick Clifton <nickc@redhat.com>
69 * doc/as.texinfo (Type): Reword description of STT_IFUNC type.
71 2008-12-03 Nick Clifton <nickc@redhat.com>
73 * config/obj-elf.c (obj_elf_type): Add support for STT_IFUNC type.
74 * doc/as.texinfo: Document new feature.
75 * NEWS: Mention new feature.
77 2008-11-29 Kai Tietz <kai.tietz@onevision.com>
79 * config/tc-i386.c (i386_target_format): For coff flavour in TE_PEP
80 use "pe-i386" for 32-bit.
82 2008-11-28 Jakub Jelinek <jakub@redhat.com>
84 * Makefile.am (ehopt.o): Add struc-symbol.h.
85 * Makefile.in: Regenerated.
86 * ehopt.c: Include struc-symbol.h.
87 (check_eh_frame): For very small O_constant DW_CFA_advance_loc4
88 create correct DW_CFA_advance_loc. Handle O_subtract only
89 for code alignment factor 1, otherwise handle O_divide or
90 O_right_shift of O_subtract and O_constant.
91 (eh_frame_estimate_size_before_relax): Always divide by ca.
92 (eh_frame_convert_frag): Likewise.
94 2008-11-28 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
96 * dw2gencfi.c (output_cfi_insn): Scale DW_CFA_advance_loc1,
97 DW_CFA_advance_loc2 and DW_CFA_advance_loc4 outputs.
99 2008-11-28 Joshua Kinard <kumba@gentoo.org>
101 * config/tc-mips.c (hilo_interlocks): Handle CPU_R14000, CPU_R16000.
102 (mips_cpu_info_table): Add r14000, r16000.
103 * doc/c-mips.texi: Add entries for 14000, 16000.
105 2008-11-27 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
107 * config/tc-cr16.h (GLOBAL_OFFSET_TABLE_NAME): Defined
108 * config/tc-cr16.c (md_pseudo_table): Add "4byte" directive to
109 md_pseudo_table and accept @c prefix, same as long directive.
110 (cr16_cons_fix_new): Initialize rtype to BFD_RELOC_UNUSED.
111 (tc_gen_reloc): Declare a variable of type bfd_reloc_code_real_type
112 and set it for GOT related relocations.
113 (md_undefined_symbol): Defined
114 (process_label_constant): Added checks for GOT/got and cGOT/cGOT
115 prefixes with constant label and set the appropriate relocation type.
116 * doc/c-cr16.texi (cr16-operand specifiers): Add got/GOT and cgot/cGOT.
118 2008-11-26 DJ Delorie <dj@redhat.com>
120 * config/tc-m32c.c (md_pseudo_table): Add support for .loc et al.
122 2008-11-25 DJ Delorie <dj@redhat.com>
124 * config/tc-m32c.c (md_convert_frag): Fix ADJNZ reloc math.
126 2008-11-21 Sterling Augustine <sterling@tensilica.com>
128 * config/tc-xtensa.c (check_t1_t2_reads_and_writes): Call
129 xtensa_state_is_shared_or to allow multiple opcodes within a
130 single FLIX bundle to write to these special states.
132 2008-11-19 Hans-Peter Nilsson <hp@axis.com>
134 * config/tc-cris.c (cris_number_to_imm): Apply S_SET_THREAD_LOCAL
135 on symbols in TLS relocs.
137 2008-11-19 Nick Clifton <nickc@redhat.com>
139 * doc/fdl.texi: Update to v1.3
140 * doc/as.texinfo: Change license to v1.3.
142 2008-11-18 Catherine Moore <clm@cm00re.com>
144 * config/tc-arm.c (neon_type_mask): Renumber.
145 (type_chk_of_el_type): Handle F_F16.
146 (neon_cvt_flavour): Recognize half-precision conversions.
147 (do_neon_cvt): New shapes NS_QD and
148 NS_DQ. Encode half-precision conversions.
149 (do_neon_cvtt): Encode the T bit.
150 (asm_opcode_insns): vcvt, vcvtt support.
151 (arm_option_cpu_value): Add neon-fp16 support.
153 2008-11-17 Nick Clifton <nickc@redhat.com>
155 * as.c (parse_args): Update copyright year.
157 2008-11-14 Mat Hostetter <mat@lcs.mit.edu>
159 * read.c (emit_expr): Grow frag before filling it so that
160 dot_value remains valid.
162 2008-11-14 Peter Jansen <pwjansen@yahoo.com>
165 * config/tc-arm.c: Ensure that all uses of as_bad have a
168 2008-11-12 Hans-Peter Nilsson <hp@axis.com>
170 * config/tc-cris.c (cris_number_to_imm): Except for
171 BFD_RELOC_NONE, always set contents. Where previously this was
172 skipped, set contents to 0.
175 * input-scrub.c (input_scrub_include_sb): Make the position
176 after the input have defined contents, a 0 character.
178 * config/tc-cris.c (cris_relax_frag): Add missing case for
179 ENCODE_RELAX (STATE_COND_BRANCH_PIC, STATE_DWORD).
182 * read.c (read_a_source_file): Rearrange evaluation order when
183 looking for '=' to avoid conditional on undefined contents of
184 input_line_pointer[1].
186 2008-11-06 Adam Nemet <anemet@caviumnetworks.com>
188 * config/tc-mips.c (COP_INSN): Change logic to always return false
191 2008-11-06 Chao-ying Fu <fu@mips.com>
193 * config/tc-mips.c (validate_mips_insn): Add case '1'.
194 (mips_ip): Add case '1' to process sync type.
196 2008-11-06 Joel Sherrill <joel.sherrill@oarcorp.com>
198 * configure.tgt: Add m32c-*-rtems* and m32r-*-rtems*.
200 2008-11-04 Sterling Augustine <sterling@tensilica.com>
202 * config/tc-xtensa.c (tinsn_check_arguments): Check for multiple
203 writes to the same register.
205 2008-11-04 Sterling Augustine <sterling@tensilica.com>
207 * config/tc-xtensa.c (xtensa_j_opcode): New.
208 (xg_instruction_matches_option_term): Handle "FREEREG" option.
209 (xg_build_to_insn): Likewise. Update renamed tls_reloc reference.
210 (md_begin): Initialize xtensa_j_opcode.
211 (md_assemble): Update renamed tls_reloc reference. Handle "j.l".
212 (xg_assemble_vliw_tokens): Save free_reg info in the frag.
213 (tinsn_immed_from_frag): Get free_reg info back out of the frag.
214 (vinsn_to_insnbuf): Update renamed tls_reloc references.
215 Distinguish extra argument for "FREEREG" from extra TLS argument.
216 * config/tc-xtensa.h (struct xtensa_frag_type): Add free_reg field.
217 * config/xtensa-istack.h (struct tinsn_struct): Rename tls_reloc
219 * config/xtensa-relax.c (widen_spec_list): Add rules to relax "j.l".
220 (build_transition): Handle "FREEREG" operand.
221 * config/xtensa-relax.h (enum op_type): Add OP_FREEREG.
223 2008-10-31 Alan Modra <amodra@bigpond.net.au>
227 2008-10-24 Maciej W. Rozycki <macro@linux-mips.org>
229 * config/tc-mips.c (mips_cpu_info_table): Move the MIPS64r2
230 comment so that Broadcom SB-1 cores are in the MIPS64 section.
232 2008-10-21 Alan Modra <amodra@bigpond.net.au>
234 * config/tc-bfin.c (gencode, allocate): Remove unnecessary cast.
235 * config/tc-ns32k.c (bit_fix_new): Likewise.
236 * config/tc-m68k.c (md_begin): Likewise.
237 * hash.c (hash_insert, hash_jam): Likewise.
238 * symbols.c (symbol_create, local_symbol_make): Likewise.
239 * frags.c (frag_alloc): Likewise.
241 2008-10-20 Jay Krell <jay.krell@cornell.edu>
243 * config/bfin-parse.y: Use C style comments.
244 * config/tc-bfin.c: Likewise.
245 * config/tc-m68k.c: Likewise.
246 * config/tc-mips.c: Likewise.
248 2008-10-12 H.J. Lu <hongjiu.lu@intel.com>
250 * config/tc-i386.c (processor_type): Moved to tc-i386.h.
251 (cpu_arch_tune): Make it global.
252 (cpu_arch_isa): Likewise.
253 (cpu_arch_isa_flags): Likewise.
254 (i386_align_code): Check fragP->tc_frag_data.isa,
255 fragP->tc_frag_data.isa_flags and cpu_arch_tune instead of
256 cpu_arch_isa, cpu_arch_isa_flags and cpu_arch_tune,
259 * config/tc-i386.h (processor_type): Moved from tc-i386.c.
260 (cpu_arch_tune): New.
261 (cpu_arch_isa): Likewise.
262 (cpu_arch_isa_flags): Likewise.
263 (i386_tc_frag_data): Likewise.
264 (TC_FRAG_TYPE): Likewise.
265 (TC_FRAG_INIT): Likewise.
267 2008-10-09 Bob Wilson <bob.wilson@acm.org>
269 * doc/as.texinfo (Pseudo Ops): Swap order of Comm and CFI menu entries.
270 (Altmacro, Comm, Loc, Loc_mark_labels, List, MRI, PopSection, Sleb128):
271 Moved into alphabetical order.
273 2008-10-09 Bob Wilson <bob.wilson@acm.org>
275 * doc/as.texinfo (Dot): Expand no-space-dir conditional to include
277 (Pseudo Ops): Put conditionals around Skip and Space menu entries.
278 (Line): Remove conditional declaration of Ln node and section here.
279 Put aout-bout description inside the no-line-dir conditional.
280 (Skip, Space): Use a separate conditional for each node.
282 2008-10-09 Bob Wilson <bob.wilson@acm.org>
284 * doc/as.texinfo (Pseudo Ops): Remove no-file-dir conditional around
285 menu entry for File; remove version-specific .file operands from menu
286 description. Replace "LNS directives" menu entry with new entries
287 for "Loc" and "Loc_mark_labels".
288 (LNS directives): Split into separate nodes for each directive.
289 (Loc): New node for .loc directive. Mention that this directive
290 is for DWARF2 and add a missing article.
291 (Loc_mark_labels): Likewise for .loc_mark_labels.
292 (File): Change this node to describe both the default version and
293 the DWARF2 version of .file. Move the no-file-dir conditional to
294 include only the default version.
296 2008-10-09 Eric Botcazou <ebotcazou@adacore.com>
298 * dw2gencfi.c (cfi_finish): Deal with md_fix_up_eh_frame.
299 * config/tc-i386.h (md_fix_up_eh_frame): Define on Solaris.
300 (i386_solaris_fix_up_eh_frame): Declare.
301 * config/tc-i386.c (i386_solaris_fix_up_eh_frame): New function.
303 2008-10-09 Nick Clifton <nickc@redhat.com>
306 * doc/as.texinfo (Dollar Local Labels): Correct description of
307 dollar local labels to show that the colon suffix is still
310 2008-10-08 Nick Clifton <nickc@redhat.com>
312 * configure.in (ALL_LINGUAS): Add "id".
313 * configure: Regenerate.
314 * po/id.po: New Indonesian translation.
316 2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
318 * read.c (pseudo_set): Don't allow global register symbol only
319 if TC_GLOBAL_REGISTER_SYMBOL_OK is undefined.
320 * symbols.c (S_SET_EXTERNAL): Likewise.
322 * config/tc-mmix.h (TC_GLOBAL_REGISTER_SYMBOL_OK): Defined.
324 * doc/internals.texi: Document TC_GLOBAL_REGISTER_SYMBOL_OK.
326 2008-10-06 Bob Wilson <bob.wilson@acm.org>
328 * doc/as.texinfo (Local): New description of ELF .local directive.
330 2008-10-06 Nick Clifton <nickc@redhat.com>
333 * read.c (get_line_sb): Renamed to get_non_macro_line_sb.
334 (_find_end_of_line): Add extra parameter indicating if the line is
335 inside a macro. If it is then do not allow the @ character to be
336 treated as a line separator character.
337 (read_a_source): Update use of _find_end_of_line.
338 (find_end_of_line): Likewise.
339 (s_irp): Update use of get_line_sb.
341 (do_repeat): Likewise.
342 (get_line_sb): New function. Like the old version of get_line_sb
343 except that it takes an extra parameter indicating whether the
344 line is inside a macro.
345 (get_macro_line_sb): New function.
347 2008-10-04 Hans-Peter Nilsson <hp@axis.com>
349 * config/tc-cris.c: Update all comments regarding explicit relocations
350 to, besides PIC, also imply TLS or to say "relocation specifier" or
352 (RELOC_SUFFIX_CHAR): Rename from PIC_SUFFIX_CHAR. Change all callers.
353 (cris_get_reloc_suffix): Rename from cris_get_pic_suffix. Change all
354 callers. Also handle TLS relocs.
355 (cris_get_specified_reloc_size): Rename from cris_get_pic_reloc_size.
356 Change all callers. Also handle TLS relocs.
358 (cris_process_instruction): Check for non-PIC TLS relocations and
359 adjust message when emitting error message about relocation not
361 (get_autoinc_prefix_or_indir_op): Also check for relocation suffix
363 (get_3op_or_dip_prefix_op): Ditto.
364 (cris_number_to_imm, tc_gen_reloc): Handle TLS relocs like PIC relocs.
366 2008-10-03 Kazu Hirata <kazu@codesourcery.com>
368 * listing.c (buffer_line): Open the source file with FOPEN_RB.
369 Manually process line ends.
371 2008-09-30 Wesley W. Terpstra <wesley@terpstra.ca>
372 Nick Clifton <nickc@redhat.com>
374 * config/tc-tic4x.c (tic4x_globl): Call S_SET_EXTERNAL as well as
377 2008-09-30 Wesley W. Terpstra <wesley@terpstra.ca>
378 Nick Clifton <nickc@redhat.com>
380 * coffgen.c (coff_write_symbols): Check to see if a symbol's flags
381 do not match it class and if necessary update the class.
382 (null_error_handler): New function. Suppresses the generation of
384 * coff64-rs6000.c (bfd_xcoff_backend_data): Update comment.
386 2008-09-30 Alan Modra <amodra@bigpond.net.au>
388 * Makefile.am: Run "make dep-am".
389 * Makefile.in: Regenerate.
391 2008-09-29 Nick Clifton <nickc@redhat.com>
393 * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of
394 tc_cfi_emit_pcrel_expr macro.
396 2008-09-29 Peter O'Gorman <pogma@thewrittenword.com>
397 Steve Ellcey <sje@cup.hp.com>
399 * configure: Regenerate for new libtool.
401 * Makefile.in: Ditto.
402 * doc/Makefile.in: Ditto.
404 2008-09-29 Nick Clifton <nickc@redhat.com>
407 * app.c (do_scrub_chars): Only issue warnings about tick
408 characters detected in symbol strings if hex ticks are supported.
410 2008-09-29 Nick Clifton <nickc@redhat.com>
412 * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of
413 tc_cfi_emit_pcrel_expr macro.
415 2008-09-28 Daniel Jacobowitz <dan@codesourcery.com>
417 * NEWS: Mention .cfi_val_encoded_addr.
419 2008-09-26 Eric Botcazou <ebotcazou@adacore.com>
421 * Makefile.am (TARG_ENV_HFILES): Add config/te-solaris.h.
422 * Makefile.in (TARG_ENV_HFILES): Likewise.
423 * configure.tgt (Solaris targets): Set em=solaris.
424 * config/te-solaris.h: New file.
426 2008-09-26 Jie Zhang <jie.zhang@analog.com>
428 * config/bfin-parse.y (asm_1): Fix reduce/reduce conflicts.
430 2008-09-24 Richard Henderson <rth@redhat.com>
432 * dw2gencfi.c (DWARF2_ADDR_SIZE): Provide default.
433 (struct cfi_insn_data): Add ea member.
434 (CFI_val_encoded_addr, dot_cfi_val_encoded_addr): New.
435 (output_cfi_insn): Handle CFI_val_encoded_addr.
436 (select_cie_for_fde): Don't match CFI_val_encoded_addr.
437 * doc/as.texinfo (.cfi_val_encoded_addr): Document.
439 2008-09-25 Alan Modra <amodra@bigpond.net.au>
442 * listing.c (print_options): Don't call fprintf without format string.
444 2008-09-19 Alan Modra <amodra@bigpond.net.au>
446 * write.c (TC_FORCE_RELOCATION_SUB_LOCAL): Heed md_register_arithmetic.
447 (TC_VALIDATE_FIX_SUB): Likewise.
448 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
449 * config/tc-hppa.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
450 * config/tc-mn10300.h (TC_VALIDATE_FIX_SUB): Likewise.
451 * config/tc-sh.h (TC_VALIDATE_FIX_SUB): Likewise.
452 (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
453 * config/tc-sh64.h (TC_VALIDATE_FIX_SUB): Likewise.
454 * config/tc-xtensa.h (TC_VALIDATE_FIX_SUB): Likewise.
455 * doc/internals.texi (TC_FORCE_RELOCATION_SUB_ABS,
456 TC_FORCE_RELOCATION_SUB_LOCAL, TC_VALIDATE_FIX_SUB): Show new param.
458 * write.c (md_register_arithmetic): Define.
459 (fixup_segment): Adjust TC_FORCE_RELOCATION_SUB_ABS invocation.
460 Modify error message when registers involved.
461 (TC_FORCE_RELOCATION_SUB_ABS): Heed md_register_arithmetic.
462 * config/tc-sh.h (TC_FORCE_RELOCATION_SUB_ABS): Likewise.
464 2008-09-15 Alan Modra <amodra@bigpond.net.au>
466 * write.c (install_reloc): Correct EMIT_SECTION_SYMBOLS test.
468 2008-09-15 Alan Modra <amodra@bigpond.net.au>
470 * config/tc-frv.c (md_apply_fix): Use abs_section_sym for
471 relocs with no symbol.
472 * config/tc-mmix.c (md_assemble): Mark fake symbol on
473 BFD_RELOC_MMIX_BASE_PLUS_OFFSET as OK for use by relocs.
474 (mmix_md_end): Likewise mark mmix reg contents section symbol.
476 2008-09-14 Chris Smith <chris@zxdesign.info>
478 * config/tc-z80.c: Opcode generation of ld a,(bc) and ld a,(de) was
479 broken, as the opcode of ld a,(de) was being emitted for both.
481 2008-09-12 Sterling Augustine <sterling@tensilica.com>
483 * config/tc-xtensa.c (init_op_placement_info_table): Allow number of
484 operands equal to MAX_INSN_ARGS.
486 2008-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
488 * configure.in: Call AC_SYS_LARGEFILE.
489 * config.in: Regenerate.
490 * configure: Regenerate.
492 2008-09-09 Peter Bergner <bergner@vnet.ibm.com>
494 * config/tc-ppc.c (ppc_setup_opcodes): Simplify POWER4/NOPOWER4 test.
495 Remove POWER5 and POWER6 tests.
497 2008-09-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
499 * config/tc-hppa.c (hppa_regname_to_dw2regnum): Add register name to
500 number support for 32-bit targets.
502 2008-09-08 Tristan Gingold <gingold@adacore.com>
504 * NEWS: Add a marker for the 2.19 features.
506 2008-09-07 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
508 * config/tc-hppa.h (DIFF_EXPR_OK): Define for SOM target. Revise
509 comment regarding use of difference expressions.
510 (TC_FORCE_RELOCATION_SUB_LOCAL): Define to 1.
512 * dw2gencfi.c (CFI_DIFF_EXPR_OK): Define if not defined.
513 (dot_cfi_personality): Use CFI_DIFF_EXPR_OK instead of DIFF_EXPR_OK.
514 (dot_cfi_lsda, output_cie, output_fde): Likewise.
515 * config/tc-hppa.h (CFI_DIFF_EXPR_OK): Define.
517 2008-09-06 Richard Sandiford <rdsandiford@googlemail.com>
519 * config/tc-mips.h (DWARF2_FDE_RELOC_SIZE): Define.
521 2008-09-03 Nick Clifton <nickc@redhat.com>
523 * config/tc-i386.c (pe_lcomm_internal): New function. Allows the
524 alignment field of the .lcomm directive to be optional.
525 (pe_lcomm): New function. Pass pe_lcomm_internal to
527 (md_pseudo_table): Implement .lcomm directive for COFF based
529 * doc/c-i386.texi (i386-Directives): New node. Used to document
530 the .lcomm directive.
532 2008-08-30 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
534 * config/tc-hppa.h: Don't define DWARF2_EH_FRAME_READ_ONLY on Linux
537 2008-08-29 Eric B. Weddington <eric.weddington@atmel.com>
539 * config/tc-avr.c (mcu_types): Add atmega16u4.
540 * doc/c-avr.texi: Likewise.
542 2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
544 * config/tc-ia64.c (CR_IIB0): New.
546 (cr): Add cr.iib0 and cr.iib1.
547 (specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.
549 2008-08-28 Jan Beulich <jbeulich@novell.com>
551 * config/tc-i386.c (md_assemble): Force number of displacement
552 operands to zero when processing string instruction.
553 (i386_index_check): Special-case string instruction operands. Don't
554 fudge address prefix if there already was a memory operand. Fix
555 error message to correctly reflect the addressing mode used.
556 (i386_att_operand): Fix comment.
557 (i386_intel_operand): Snapshot, clear, and restore base and index
558 reg for each operand processed. Increment count of memory operands
561 2008-08-27 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
563 * config/tc-hppa.c (is_SB_relative): New macro.
564 (fix_new_hppa): Remove $segrel$ marker.
565 (cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is
567 * config/tc-hppa.h (tc_frob_symbol): Check for $segrel$.
569 2008-08-27 Jan Beulich <jbeulich@novell.com>
571 * config/tc-i386.c (check_string): Use register_prefix for error
573 (process_operands): Likewise.
575 2008-08-26 Mark Mitchell <mark@codesourcery.com>
577 * c-arm.texi: Add tutorial on ARM unwinding pseudo ops.
579 2008-08-26 Jie Zhang <jie.zhang@analog.com>
581 * config/bfin-parse.y (check_macfunc_option): Fix instruction
583 (asm_1): Check mode for 16-bit multiply instructions.
585 2008-08-24 Alan Modra <amodra@bigpond.net.au>
587 * configure.in: Update a number of obsolete autoconf macros.
588 * configure: Regenerate.
589 * aclocal.m4: Regenerate.
591 2008-08-22 Nick Clifton <nickc@redhat.com>
593 * config/tc-mcore.c (md_assemble): Increase length of name array
594 to include terminating NUL.
596 2008-08-22 Jie Zhang <jie.zhang@analog.com>
598 * config/bfin-lex.l (NUMBER): Protect special `.'.
600 2008-08-22 Alan Modra <amodra@bigpond.net.au>
602 * symbols.c (symbol_clone): Ensure clones are not external.
604 2008-08-22 Alan Modra <amodra@bigpond.net.au>
606 * config/tc-hppa.c (md_begin): Set BSF_KEEP for "dummy_symbol".
608 2008-08-21 Richard Henderson <rth@redhat.com>
610 * dw2gencfi.c (DWARF2_FDE_RELOC_SIZE): New.
611 (output_cie, output_fde): Use it.
612 (DWARF2_EH_FRAME_READ_ONLY): New.
613 (cfi_finish): Use it.
615 * config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit.
616 (DWARF2_CIE_DATA_ALIGNMENT): Change sign.
617 (DWARF2_EH_FRAME_READ_ONLY): New.
618 * config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations
619 from the results of DIFF_EXPR_OK manipulation.
621 2008-08-21 Sterling Augustine <sterling@tensilica.com>
623 * config/xtensa-istack.h (MAX_INSN_ARGS): Increase to 64.
625 2008-08-20 Bob Wilson <bob.wilson@acm.org>
627 * config/tc-xtensa.c (O_tlsfunc, O_tlsarg, O_tlscall): Define.
628 (O_tpoff, O_dtpoff): Define.
629 (suffix_relocs): Add entries for TLS suffixes.
630 (xtensa_elf_cons): Check for invalid use of TLS relocations.
631 (map_operator_to_reloc): Add is_literal parameter and use it to
632 control translating TLS instruction relocations to the corresponding
634 (xg_valid_literal_expression): Allow TLS operators.
635 (xg_build_to_insn): Copy TLS operators from pseudo-instruction
636 operands to generated literals.
637 (xg_assemble_literal): Handle TLS operators. Update call to
638 map_operator_to_reloc.
639 (md_assemble): Handle CALLXn.TLS pseudo-instruction.
640 (md_apply_fix): Handle TLS relocations.
641 (emit_single_op): Handle TLS operators.
642 (convert_frag_immed): Update call to map_operator_to_reloc.
643 (vinsn_to_insnbuf): Emit relocations for TLS-related instructions.
644 * config/xtensa-istack.h (tinsn_struct): Add tls_reloc field.
645 * config/xtensa-relax.c (append_literal_op): Add src_op parameter
646 to initialize the op_data field of the BuildOp.
647 (build_transition): Use it here to record the source operand
648 corresponding to a generated literal.
649 * config/xtensa-relax.h (build_op): Comment op_data use for literals.
651 2008-08-20 H.J. Lu <hongjiu.lu@intel.com>
653 AVX Programming Reference (August, 2008)
654 * config/tc-i386.c (CPU_FLAGS_AES_MATCH): New.
655 (CPU_FLAGS_AVX_MATCH): Likewise.
656 (CPU_FLAGS_32BIT_MATCH): Updated.
657 (cpu_flags_match): Likewise.
659 2008-08-20 Alan Modra <amodra@bigpond.net.au>
662 * write.c (install_reloc): Check that reloc symbols have been
664 (set_symtab): Mark symbols with BSF_KEEP.
666 2008-08-18 H.J. Lu <hongjiu.lu@intel.com>
668 * config/tc-i386.c (i386_align_code): Fix a comment typo.
670 2008-08-15 Alan Modra <amodra@bigpond.net.au>
673 * configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
674 * Makefile.in: Regenerate.
675 * aclocal.m4: Regenerate.
676 * config.in: Regenerate.
677 * configure: Regenerate.
678 * doc/Makefile.in: Regenerate.
680 2008-08-14 Alan Modra <amodra@bigpond.net.au>
682 * config/tc-tic4x.c (tic4x_operands_parse): Make static.
684 2008-08-13 Ben Elliston <bje@au.ibm.com>
686 * doc/as.texinfo (Align): Document the PowerPC behaviour.
688 2008-08-13 Alan Modra <amodra@bigpond.net.au>
690 * as.c, as.h, ecoff.c, hash.c, macro.c, symbols.c, config/obj-evax.c,
691 config/obj-som.c, config/tc-alpha.c, config/tc-arm.c, config/tc-bfin.c,
692 config/tc-bfin.h, config/tc-crx.c, config/tc-frv.c, config/tc-frv.h,
693 config/tc-hppa.h, config/tc-i386.c, config/tc-i860.c, config/tc-i960.h,
694 config/tc-ia64.c, config/tc-ia64.h, config/tc-m32c.c, config/tc-m32c.h,
695 config/tc-m68k.c, config/tc-maxq.c, config/tc-s390.c, config/tc-s390.h,
696 config/tc-sparc.c, config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
697 config/tc-tic4x.c, config/tc-tic4x.h, config/tc-tic54x.c,
698 config/tc-tic54x.h, config/tc-vax.c, doc/internals.texi: Banish PARAMS
699 and PTR. Convert to ISO C. Delete unnecessary forward declarations.
701 2008-08-12 Alan Modra <amodra@bigpond.net.au>
703 * config/tc-arm.c (s_unreq): Adjust hash_delete call.
704 * config/tc-ia64.c (dot_rot): Likewise.
706 2008-08-11 Alan Modra <amodra@bigpond.net.au>
709 * hash.c: Expand PTR to void *.
710 (hash_delete): Add "freeme" parameter. Call obstack_free.
711 * hash.h: Expand PTR to void *.
712 (hash_delete): Update prototype.
713 * macro.c (macro_expand_body): hash_delete LOCALs from formal_hash.
714 * config/tc-tic54x.c (tic54x_remove_local_label): Update hash_delete
716 (subsym_substitute): Likewise.
717 * doc/internals.texi (hash_delete): Update.
719 2008-08-08 Anatoly Sokolov <aesok@post.ru>
721 * config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
722 architectures. Reorganize list to put mcu types in correct
723 architectures and to order list same as in GCC. Use new ISA
724 definitions in include/opcode/avr.h.
725 * doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
726 descriptions. Reorganize descriptions to put mcu types in correct
727 architectures and to order lists same as in GCC.
729 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
730 Daniel Jacobowitz <dan@codesourcery.com>
732 * config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
733 (OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
734 (OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
735 (OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
736 (md_longopts): Add -call_nonpic.
737 (md_parse_option): Handle OPTION_CALL_NONPIC.
738 (md_show_usage): Add -call_nonpic.
740 2008-08-08 Sterling Augustine <sterling@tensilica.com>
742 * config/tc-xtensa.c (exclude_section_from_property_tables): New.
743 (xtensa_create_property_segments): Use it.
744 (xtensa_create_xproperty_segments): Likewise.
746 2008-08-08 Alan Modra <amodra@bigpond.net.au>
748 * doc/internals.texi (DWARF2_FORMAT): Update for 2008-08-04 change.
750 2008-08-06 Richard Sandiford <rdsandiford@googlemail.com>
752 * config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
753 (lo16_reloc_p): New functions.
754 (reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
755 generalize relocation checks.
756 (matching_lo_reloc): New function.
757 (fixup_has_matching_lo_p): Use it.
758 (mips16_mark_labels): Don't clobber a symbol's visibility.
759 (append_insn): Use hi16_reloc_p and lo16_reloc_p.
760 (mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
761 (md_apply_fix): Likewise.
762 (mips16_percent_op): Add %got and %call16.
763 (mips_frob_file): Use got16_reloc_p to generalize relocation checks.
764 Use matching_lo_reloc.
765 (mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
766 generalize relocation checks.
767 (mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
770 2008-08-06 DJ Delorie <dj@redhat.com>
772 * NEWS: Mention these changes.
774 * config/tc-h8300.h (H_TICK_HEX): Define.
775 * config/tc-h8300.c (OPTION_H_TICK_HEX): New.
776 (md_longopts): Add "-h-tick-hex".
777 (md_parse_option): Support it.
778 * doc/c-h8300.texi (H8/300 Options): Document it.
779 * doc/as.texinfo (Overview): Likewise.
781 * config/tc-sh.h (H_TICK_HEX): Define.
782 * config/tc-sh.c (OPTION_H_TICK_HEX): New.
783 (md_longopts): Add "-h-tick-hex".
784 (md_parse_option): Support it.
785 * doc/c-sh.texi (SH Options): Document it.
786 * doc/c-sh64.texi (SH64 Options): Document it.
787 * doc/as.texinfo (Overview): Likewise.
789 2008-08-05 Alan Modra <amodra@bigpond.net.au>
792 * dwarf2dbg.c (dwarf2_directive_file): Disable gas generated
793 debug info if we see compiler generated debug info.
794 (dwarf2_directive_loc): Likewise. Remove redundant debug_type test.
796 2008-08-04 Alan Modra <amodra@bigpond.net.au>
798 * dwarf2dbg.c: Remove superfluous forward function declarations.
799 (DWARF2_FORMAT): Add section arg.
800 (out_header): New function, split out from..
801 (out_debug_line): ..here.
802 (out_debug_aranges): Use out_header.
803 (out_debug_abbrev): Add info_seg and line_seg args. Use
804 DW_FORM_data8 (for DW_AT_stmt_list) if line_seg is 64-bit.
805 (out_debug_info): Use out_header. Output 8 byte DW_AT_stmt_list
806 if line_seg is 64-bit.
807 (dwarf2_finish): Adjust out_debug_abbrev call.
808 * config/tc-mips.h (DWARF2_FORMAT, mips_dwarf2_format): Add sec arg.
809 * config/tc-mips.c (mips_dwarf2_format): Likewise.
811 2008-08-04 Alan Modra <amodra@bigpond.net.au>
813 * Makefile.am (POTFILES.in): Set LC_ALL=C.
814 * Makefile.in: Regenerate.
815 * po/POTFILES.in: Regenerate.
817 2008-08-01 Peter Bergner <bergner@vnet.ibm.com>
819 * config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
820 Handle -mvsx and -mpower7.
821 (md_show_usage): Document -mpower7 and -mvsx.
822 * doc/as.texinfo (Target PowerPC): Document -mvsx.
823 * doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
825 2008-07-31 Peter Bergner <bergner@vnet.ibm.com>
827 * config/tc-ppc.c (parse_cpu) <power6>: Accept Altivec instructions.
830 2008-07-30 Michael J. Eager <eager@eagercon.com>
832 * config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
833 (md_show_usage): Likewise.
835 2008-07-30 Alan Modra <amodra@bigpond.net.au>
837 * messages.c, symbols.c, write.c: Silence gcc warnings.
839 2008-07-28 Ineiev <ineiev@yahoo.co.uk>
841 * config/tc-i386.c (operand_type_check): Warning fix.
843 2008-07-26 Michael Eager <eager@eagercon.com>
845 * doc/as.texinfo: Add description of single-precision attribute.
847 2008-07-24 Jie Zhang <jie.zhang@analog.com>
849 * config/bfin-parse.y (asm_1): Error if plain symbol is used
850 as load/store offset.
852 2008-07-22 Chao-ying Fu <fu@mips.com>
854 * config/tc-mips.c (mips_ip): Reset s to argsStart.
856 2008-07-22 Jie Zhang <jie.zhang@analog.com>
858 * config/tc-bfin.c (bfin_gen_loop): Remove loop symbol.
860 2008-07-21 DJ Delorie <dj@redhat.com>
862 * config/tc-h8300.c (fix_operand_size): Use the default size
863 specified by the .lbranch/.sbranch pseudos.
865 2008-07-18 DJ Delorie <dj@redhat.com>
867 * config/tc-m32c.h (H_TICK_HEX): Define.
868 * config/tc-m32c.c (OPTION_H_TICK_HEX): Define.
869 (md_longopts): Add support for it.
870 (md_parse_option): Likewise.
871 * doc/as.texinfo (Overview): Add new m32c options.
872 * doc/c-m32c.texi (M32C-Modifiers): Likewise
874 * as.h: (enable_h_tick_hex): New.
875 * app.c (enable_h_tick_hex): New.
877 (do_scrub_begin): Mark 'H' and 'h' as special if enable_h_tick_hex.
878 (do_scrub_chars): If enable_h_tick_hex and 'h', check for H'00
879 style hex constants and convert the input stream to 0x00 style.
880 (do_scrub_chars): If a 'X style character constant is found after
881 a symbol character (like you're or X'00), warn the user.
883 2008-07-10 Richard Sandiford <rdsandiford@googlemail.com>
885 * config/tc-mips.c (mips16_mark_labels): Use ELF_ST_SET_MIPS16.
886 (mips_fix_adjustable): Likewise.
887 (mips_frob_file_after_relocs): Likewise.
889 2008-07-08 Nathan Sidwell <nathan@codesourcery.com>
891 * config/tc-m68k.c (m68k_set_cpu, m68k_set_arch): Don't complain
892 about overriding an earlier setting.
894 2008-07-07 Adam Nemet <anemet@caviumnetworks.com>
896 * config/tc-mips.c (NO_ISA_COP): New macro.
897 (COP_INSN): New macro.
898 (is_opcode_valid): Use them.
899 (macro) <ld_st>: Use them. Don't accept coprocessor load store
900 insns based on the ISA if CPU is NO_ISA_COP.
901 <copz>: Likewise for coprocessor operations.
903 2008-07-07 Paul Brook <paul@codesourcery.com>
905 * config/tc-arm.c (arm_fix_adjustable): Don't adjust MOVW/MOVT
908 2008-07-07 Ralf Corsépius <ralf.corsepius@rtems.org>
910 * configure.tgt: Add bfin-*-rtems*.
912 2008-07-04 Alan Modra <amodra@bigpond.net.au>
914 * config/tc-spu.c (md_apply_fix): Handle fully resolved
915 BFD_RELOC_32_PCREL, BFD_RELOC_SPU_HI16 and BFD_RELOC_SPU_LO16.
917 2008-06-25 Peter Bergner <bergner@vnet.ibm.com>
919 * config/tc-ppc.c (parse_cpu): Handle -m464.
920 (md_show_usage): Likewise.
922 2008-06-24 Eric B. Weddington <eric.weddington@atmel.com>
924 Add support for ATtiny13A.
925 * config/tc-avr.c (mcu_types): Add attiny13a.
926 * doc/c-avr.texi: Likewise.
928 2008-06-24 Bob Wilson <bob.wilson@acm.org>
929 Alan Modra <amodra@bigpond.net.au>
931 * write.c (relax_segment <rs_org>): Include current stretch
932 value when calculating whether .org is backwards.
934 2008-06-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
936 * configure: Regenerate.
938 2008-06-17 Nick Clifton <nickc@redhat.com>
940 * app.c (do_scrub_chars): Do not UNGET an EOF value.
942 2008-06-16 Hans-Peter Nilsson <hp@bitrange.com>
945 * config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
946 text_section. Do the "stepping backwards" test for text_section
947 using unsigned operands.
949 2008-06-13 Peter Bergner <bergner@vnet.ibm.com>
951 * config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
952 (ppc_insert_operand): Likewise.
953 (ppc_machine): Likewise.
954 * config/tc-ppc.h: #include "opcode/ppc.h"
955 (struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
956 (ppc_cpu): Update extern decl.
958 2008-06-12 Adam Nemet <anemet@caviumnetworks.com>
960 * config/tc-mips.c (validate_mips_insn): Handle field descriptors
961 +x, +X, +p, +P, +s, +S.
964 * config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
966 (macro_build): Likewise.
967 (CPU_HAS_SEQ): New macro.
968 (macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
970 2008-06-09 Eric B. Weddington <eric.weddington@atmel.com>
972 * config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
973 * doc/c-avr.texi: Likewise.
975 2008-06-04 Nick Clifton <nickc@redhat.com>
977 * app.c (do_scrub_chars): Do not UNGET an EOF value.
979 2008-06-03 H.J. Lu <hongjiu.lu@intel.com>
981 * config/tc-i386.c (set_sse_check): New.
982 (md_pseudo_table): Add "sse_check".
984 2008-06-03 Paul Brook <paul@codesourcery.com>
986 * config/tc-arm.c (do_t_rbit): Populate both rm fields.
988 2008-05-30 Nick Clifton <nickc@redhat.com>
991 * config/tc-avr.c (avr_ldi_expression): Do not warn about unknown
994 2008-05-29 Maxim Kuvyrkov <maxim@codesourcery.com>
996 * config/tc-mips.c (mips_cpu_info_table): Move records for
997 ST Loongson-2E/2F processors to a better place.
999 2008-05-23 H.J. Lu <hongjiu.lu@intel.com>
1002 * config/tc-i386.c (match_template): Report ambiguous operand
1003 size, not invalid suffix when there is no match in Intel
1006 2008-05-22 Paul Brook <paul@codesourcery.com>
1008 * config/tc-arm.c (parse_cond): Covert to lowercase before matching.
1010 2008-05-21 I-Jui Sung <ijsung@gmail.com>
1012 * config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE
1013 compatible cores: fa526, fa626, fa626te, fa726te.
1014 * doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te,
1017 2008-05-14 Alan Modra <amodra@bigpond.net.au>
1019 * Makefile.am: Run "make dep-am".
1020 * Makefile.in: Regenerate.
1021 * doc/Makefile.in: Regenerate.
1022 * po/POTFILES.in: Regenerate.
1024 2008-05-09 Catherine Moore <clm@codesourcery.com>
1026 * config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
1027 with non-MIPS16 relocs.
1029 2008-05-09 Chao-ying Fu <fu@mips.com>
1031 * config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
1032 case that some characters append at the end of the name.
1033 (mips_ip): Likewise.
1034 (s_change_sec): Likewise.
1035 (md_section_align): Likewise.
1037 2008-05-07 Bob Wilson <bob.wilson@acm.org>
1039 * config/tc-xtensa.c (xtensa_create_property_segments): Use
1040 xtensa_make_property_section instead of xtensa_get_property_section.
1041 (xtensa_create_xproperty_segments): Likewise.
1043 2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
1045 * NEWS: Mention XSAVE, EPT and MOVBE.
1047 * config/tc-i386.c (cpu_arch): Add .movbe and .ept.
1048 (md_show_usage): Add .movbe and .ept.
1050 * doc/c-i386.texi: Add movbe and ept to -march=. Document
1053 2008-04-29 David S. Miller <davem@davemloft.net>
1055 * config/tc-sparc.c (v9a_asr_table): Fix order of softint entries.
1057 2008-04-28 Adam Nemet <anemet@caviumnetworks.com>
1059 * config/tc-mips.c (file_mips_soft_float, file_mips_single_float):
1061 (OPTION_ELF_BASE): Make room for new option macros.
1062 (OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
1063 OPTION_DOUBLE_FLOAT): New option macros.
1064 (md_longopts): Add msoft-float, mhard-float, msingle-float and
1066 (md_parse_option): Handle OPTION_SINGLE_FLOAT,
1067 OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
1068 (md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
1070 (struct mips_set_options): New fields soft_float and single_float.
1071 (mips_opts): Initialized them. Add comment for each field
1073 (mips_after_parse_args): Set them based on file_mips_soft_float
1074 and file_mips_single_float.
1075 (s_mipsset): Add support for `.set softfloat', `.set hardfloat',
1076 `.set singlefloat' and `.set doublefloat'.
1077 (is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
1078 Handle single-float and soft-float instructions here.
1079 (macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
1080 (is_opcode_valid_16): New function.
1081 (mips16_ip): Use it instead of OPCODE_IS_MEMBER.
1082 (macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
1083 M_S_DOB>: Remove special-casing of r4650.
1084 * doc/c-mips.texi (-march=): Add Octeon.
1085 (MIPS Opts): Document -msoft-float and -mhard-float. Document
1086 -msingle-float and -mdouble-float.
1087 (MIPS floating-point): New section. Document `.set softfloat' and
1088 `.set hardfloat'. Document `.set singlefloat' and `.set
1091 2008-04-25 David S. Miller <davem@davemloft.net>
1093 * config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
1096 * doc/c-sparc.texi: Consistently refer to architecture 'versions',
1097 rather than occaisionally 'levels'. Consistently refer to Sun's
1098 UNIX variant as SunOS, every version of Solaris is also SunOS.
1099 Document new 'softint_clear' and 'softint_set' aliases. Clarify
1100 which architecture versions support '%dcr', '%cq', and '%gl'. Add
1101 section on 32-bit/64-bit opcode translations.
1103 2008-04-23 Mike Frysinger <vapier@gentoo.org>
1105 * Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
1106 (OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
1107 (obj-fdpicelf.o): Define.
1108 * Makefile.in: Regenerate.
1109 * configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
1111 (bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
1112 (bfin-*-uclinux*): New; set fmt to elf and em to linux.
1113 * config/obj-fdpicelf.c: New.
1114 * config/obj-fdpicelf.h: Likewise.
1115 * config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
1116 the OBJ_FDPIC_ELF define.
1117 (OPTION_NOPIC): Define.
1118 (md_longopts): Add mnopic and mno-fdpic.
1119 (md_parse_option): Handle OPTION_NOPIC.
1121 2008-04-23 Paolo Bonzini <bonzini@gnu.org>
1123 * aclocal.m4: Regenerate.
1124 * configure: Regenerate.
1126 2008-04-23 David S. Miller <davem@davemloft.net>
1128 * config/tc-sparc.c (v9a_asr_table): Add missing
1129 'stick' and 'stick_cmpr', and document ordering rules
1131 (tc_gen_reloc): Accept BFD_RELOC_SPARC_PC22 and
1132 BFD_RELOC_SPARC_PC10.
1133 * doc/c-sparc.texi: New section on Sparc constants.
1134 Add documentation for %stick and %stick_cmpr.
1136 2008-04-22 David S. Miller <davem@davemloft.net>
1138 * config/obj-elf.c (obj_elf_section_type): Add prototype
1139 before obj_elf_section_word and add 'warn' arg.
1140 (obj_elf_section_word): Add type pointer arg, and if no #SECTION
1141 is matched, try checking for #SECTION_TYPE.
1142 (obj_elf_section): Adjust for new args.
1143 (obj_elf_type_name): New function.
1144 (obj_elf_type): Call it, and accept STT_foo number strings
1145 in .type statements as output by SunPRO compiler.
1147 2008-04-22 H.J. Lu <hongjiu.lu@intel.com>
1149 * config/tc-i386.c (md_assemble): Don't check SSE instructions
1152 2008-04-18 David S. Miller <davem@davemloft.net>
1154 * doc/c-sparc.texi: Add syntax section.
1156 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
1158 * config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
1159 REG and NDS for instructions with immediate operand.
1161 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
1163 * config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
1166 2008-04-16 David S. Miller <davem@davemloft.net>
1168 * config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics
1169 and relocation generation.
1170 (tc_gen_reloc): Likewise.
1172 2008-04-15 Andrew Stubbs <andrew.stubbs@st.com>
1174 * config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4
1175 relocations are properly aligned, and not negative.
1177 2008-04-15 Khem Raj <kraj@mvista.com>
1179 * doc/tc-arm.texi: Fix fnstart and fnend directive names.
1181 2008-04-14 Edmar Wienskoski <edmar@freescale.com>
1183 * config/tc-ppc.c (parse_cpu): Handle "e500mc". Extend "e500" to
1184 accept e500mc instructions.
1185 (md_show_usage): Document -me500mc.
1187 2008-04-11 Nick Clifton <nickc@redhat.com>
1189 * listing.c (print_timestamp): Use localtime rather than
1190 localtime_r since not all build environments provide the latter.
1192 2008-04-10 H.J. Lu <hongjiu.lu@intel.com>
1194 * NEWS: Mention -msse-check=[none|error|warning].
1196 * config/tc-i386.c (sse_check): New.
1197 (OPTION_MSSE_CHECK): Likewise.
1198 (md_assemble): Check SSE instructions if needed.
1199 (md_longopts): Add -msse-check.
1200 (md_parse_option): Handle OPTION_MSSE_CHECK.
1201 (md_show_usage): Show -msse-check=[none|error|warning].
1203 * doc/c-i386.texi: Document -msse-check=[none|error|warning].
1205 2008-04-10 Santiago Urueña <suruena@gmail.com>
1207 * listing.c: Add -ag listing flag to show general information in
1208 listings such as gas version, passed options, and time stamp.
1209 (listing_general_info): New function.
1210 (print_options): New function.
1211 (print_single_option): New function.
1212 (print_timestamp): New function.
1213 (MAX_DATELEN): Define.
1214 (listing_print): Add call to listing_general_info.
1215 * listing.h (LISTING_GENERAL): Define.
1216 (listing_print): Add new parameter.
1217 * as.c (show_usage): Print new switch.
1218 (parse_args): Parse new switch.
1219 (main): Pass command line on to listing_print.
1220 * NEWS: Mention this new feature.
1221 * doc/as.texinfo: Document the new sub-option.
1223 2008-04-08 Alan Modra <amodra@bigpond.net.au>
1225 * dwarf2dbg.c (dwarf2_emit_insn): Simplify test before dwarf2_where
1226 call. Delete out of date comment.
1227 (dwarf2_consume_line_info): Always clear dwarf2_loc_directive_seen.
1228 (dwarf2_emit_label): Don't emit unless there has been a previous
1229 .file or we are outputting assembler generated debug.
1230 dwarf2_consume_line_info after emitting line info, not before.
1231 (out_debug_info): Simplify files_in_use test.
1233 2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
1235 * config/tc-i386.c (parse_real_register): Return AVX register
1236 only if AVX is enabled.
1238 2008-04-07 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1241 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
1242 md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
1244 2008-04-04 Adrian Bunk <bunk@stusta.de>
1245 Bob Wilson <bob.wilson@acm.org>
1247 * config/tc-xtensa.c (xg_apply_fix_value): Check return code from
1248 call to decode_reloc.
1250 2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
1252 * NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
1254 * config/tc-i386.c (cpu_arch): Add .pclmul.
1255 (md_show_usage): Replace clmul with pclmul.
1256 * doc/c-i386.texi: Likewise.
1258 2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
1260 * NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
1262 * doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
1263 Document -msse2avx, .avx, .aes, .clmul and .fma.
1265 * config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
1266 (vex_prefix): Likewise.
1267 (sse2avx): Likewise.
1268 (CPU_FLAGS_ARCH_MATCH): Likewise.
1269 (CPU_FLAGS_64BIT_MATCH): Likewise.
1270 (CPU_FLAGS_32BIT_MATCH): Likewise.
1271 (CPU_FLAGS_PERFECT_MATCH): Likewise.
1273 (vex_imm4): Likewise.
1274 (fits_in_imm4): Likewise.
1275 (build_vex_prefix): Likewise.
1276 (VEX_check_operands): Likewise.
1277 (bad_implicit_operand): Likewise.
1278 (OPTION_MSSE2AVX): Likewise.
1279 (T_YMMWORD): Likewise.
1280 (_i386_insn): Add vex.
1281 (cpu_arch): Add .avx, .aes, .clmul and .fma.
1282 (cpu_flags_match): Changed to take a pointer to const template.
1283 Enable encoding SSE instructions with VEX prefix for -msse2avx.
1284 (match_mem_size): Also check ymmword.
1285 (operand_type_match): Clear ymmword.
1286 (md_begin): Allow '_' in mnemonic.
1287 (type_names): Add OPERAND_TYPE_VEX_IMM4.
1288 (process_immext): Update assert.
1289 (md_assemble): Don't call process_immext if sse2avx and immext
1290 are true. Call build_vex_prefix if vex is true.
1291 (parse_insn): Updated for cpu_flags_match.
1292 (swap_operands): Handle 5 operands.
1293 (match_template): Handle 5 operands. Updated for cpu_flags_match.
1294 Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
1295 (process_suffix): Handle YMMWORD_MNEM_SUFFIX.
1296 (check_byte_reg): Check regymm.
1297 (process_operands): Duplicate the destination register for
1298 -msse2avx if needed.
1299 (build_modrm_byte): Updated for instructions with VEX encoding.
1300 (output_insn): Output VEX prefix if needed.
1301 (md_longopts): Add msse2avx.
1302 (md_parse_option): Handle OPTION_MSSE2AVX.
1303 (md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
1304 (intel_e09): Support YMMWORD.
1305 (intel_e11): Likewise.
1306 (intel_get_token): Likewise.
1308 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
1310 * config/tc-avr.c (mcu_types): Add attiny167.
1311 * doc/c-avr.texi: Likewise.
1313 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
1315 * config/tc-avr.c (mcu_types): Add atmega32u4.
1316 * doc/c-avr.texi: Likewise.
1318 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
1320 * config/tc-avr.c (mcu_types): Add atmega32c1.
1321 * doc/c-avr.texi: Likewise.
1323 2008-03-28 Paul Brook <paul@codesourcery.com>
1325 * config/tc-arm.c (parse_neon_mov): Parse register before immediate
1326 to avoid spurious symbols.
1328 2008-03-28 Nathan Sidwell <nathan@codesourcery.com>
1330 * config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with
1333 2008-03-27 Eric B. Weddington <eric.weddington@atmel.com>
1335 * config/tc-avr.c (mcu_types): Add atmega32m1.
1336 * doc/c-avr.texi: Likewise.
1338 2008-03-27 Ineiev <ineiev@yahoo.co.uk>
1340 * config/tc-arm.c (do_neon_cvt): Move variable declarations to
1342 (do_neon_ext): Fix sign of comparison.
1344 2008-03-26 Bernd Schmidt <bernd.schmidt@analog.com>
1346 From Jie Zhang <jie.zhang@analog.com>
1347 * config/bfin-parse.y (asm_1): Check AREGS in comparison
1348 instructions. And call yyerror when comparing PREG with
1350 (check_macfunc_option): New.
1351 (check_macfuncs): Check option by calling check_macfunc_option.
1352 Fix comparison always true warnings. Both scalar instructions
1353 of vector instruction must share the same mode option. Only allow
1354 option mode at the end of the second instruction of the vector.
1355 (asm_1): Check option by calling check_macfunc_option.
1357 * config/bfin-parse.y (check_macfunc_option): Allow (IU)
1358 option for multiply and multiply-accumulate to data register
1360 (check_macfuncs): Don't check if accumulator matches the data register
1362 (assign_macfunc): Check if accumulator matches the
1363 data register in each rule that moves to the data
1366 * config/tc-bfin.c (bfin_start_line_hook): Localize the labels
1367 generated for LOOP_BEGIN and LOOP_END instructions.
1368 (bfin_gen_loop): Likewise.
1370 2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
1372 * config/tc-s390.c (md_parse_option): z10 option added.
1374 2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1376 * aclocal.m4: Regenerate.
1377 * configure: Likewise.
1378 * Makefile.in: Likewise.
1379 * doc/Makefile.in: Likewise.
1381 2008-03-17 Adrian Bunk <bunk@stusta.de>
1384 * config/tc-hppa.c (is_same_frag): Delete.
1386 2008-03-14 Sterling Augustine <sterling@tensilica.com>
1388 * config/tc-xtensa.h (xtensa_relax_statesE): Update comment for
1389 RELAX_LOOP_END_ADD_NOP.
1391 2008-03-13 Evandro Menezes <evandro@yahoo.com>
1394 * read.c (s_mexit): Warn if attempting to exit a macro when not
1395 inside a macro definition.
1397 2008-03-13 Alan Modra <amodra@bigpond.net.au>
1399 * Makefile.am: Run "make dep-am".
1400 * Makefile.in: Regenerate.
1401 * configure: Regenerate.
1403 2008-03-09 Paul Brook <paul@codesourcery.com>
1405 * config/tc-arm.c (arm_cpu_option_table): Add cortex-a9.
1406 * doc/c-arm.texi: Add cortex-a9.
1408 2008-03-09 Paul Brook <paul@codesourcery.com>
1410 * config/tc-arm.c (fpu_vfp_ext_d32): New vairable.
1411 (parse_vfp_reg_list, encode_arm_vfp_reg): Use it.
1412 (arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3.
1413 (aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16.
1414 * doc/c-arm.texi: Document new ARM FPU variants.
1416 2008-03-07 Paul Brook <paul@codesourcery.com>
1418 * config/tc-arm.c (md_apply_fix): Use correct offset range.
1420 2008-03-07 Alan Modra <amodra@bigpond.net.au>
1422 * config/tc-ppc.c (ppc_setup_opcodes): Tidy. Add code to test
1423 for strict ordering of powerpc_opcodes, but disable for now.
1425 2008-03-04 Paul Brook <paul@codesourcery.com>
1427 * config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New.
1428 (arm_ext_v7m): Rename...
1429 (arm_ext_m): ... to this. Include v6-M.
1430 (do_t_add_sub): Allow narrow low-reg non flag setting adds.
1431 (do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m.
1432 (md_assemble): Allow wide msr instructions.
1433 (insns): Add classifications for v6-m instructions.
1434 (arm_cpu_option_table): Add cortex-m1.
1435 (arm_arch_option_table): Add armv6-m.
1436 (cpu_arch): Add ARM_ARCH_V6M. Fix numbering of other v6 variants.
1438 2008-03-03 Sterling Augustine <sterling@tensilica.com>
1439 Bob Wilson <bob.wilson@acm.org>
1441 * config/tc-xtensa.c (xtensa_num_pipe_stages): New.
1442 (md_begin): Initialize it.
1443 (resources_conflict): Use it.
1445 2008-03-03 Sterling Augustine <sterling@tensilica.com>
1447 * config/tc-xtensa.h (RELAX_XTENSA_NONE): New.
1449 2008-03-03 Denys Vlasenko <vda.linux@googlemail.com>
1450 H.J. Lu <hongjiu.lu@intel.com>
1453 * read.c (pseudo_set): Don't allow global register symbol.
1455 * symbols.c (S_SET_EXTERNAL): Don't allow register symbol
1458 2008-03-03 H.J. Lu <hongjiu.lu@intel.com>
1461 * write.c (write_object_file): Don't allow symbols which were
1462 equated to register. Stop if there is an error.
1464 2008-03-01 Alan Modra <amodra@bigpond.net.au>
1466 * config/tc-ppc.h (struct _ppc_fix_extra): New.
1468 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Define.
1469 * config/tc-ppc.c (ppu_cpu): Make global.
1470 (ppc_insert_operand): Add ppu_cpu parameter.
1471 (md_assemble): Adjust for above change.
1472 (md_apply_fix): Pass tc_fix_data.ppc_cpu to ppc_insert_operand.
1474 2008-02-22 Nick Clifton <nickc@redhat.com>
1476 * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF
1477 targeted ARM ports, otherwise just skip generating the reloc.
1479 2008-02-18 H.J. Lu <hongjiu.lu@intel.com>
1481 * doc/c-i386.texi: Update -march= and .arch.
1483 2008-02-18 Nick Clifton <nickc@redhat.com>
1485 * config/tc-mn10300.c (has_known_symbol_location): New function.
1486 Do not regard weak symbols as having a known location.
1487 (md_estimate_size_before_relax): Use new function.
1488 (md_pcrel_from): Do not compute a pcrel against a weak symbol.
1490 2008-02-18 Jan Beulich <jbeulich@novell.com>
1492 * config/tc-i386.c (match_template): Disallow 'l' suffix when
1493 currently selected CPU has no 32-bit support.
1494 (parse_real_register): Do not return registers not available on
1495 currently selected CPU.
1497 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
1499 * config/tc-i386.c (process_immext): Fix format.
1501 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
1503 * config/tc-i386.c (inoutportreg): New.
1504 (process_immext): New.
1505 (md_assemble): Use it.
1506 (update_imm): Use imm16 and imm32s.
1507 (i386_att_operand): Use inoutportreg.
1509 2008-02-14 H.J. Lu <hongjiu.lu@intel.com>
1511 * config/tc-i386.c (operand_type_all_zero): New.
1512 (operand_type_set): Likewise.
1513 (operand_type_equal): Likewise.
1514 (cpu_flags_all_zero): Likewise.
1515 (cpu_flags_set): Likewise.
1516 (cpu_flags_equal): Likewise.
1517 (UINTS_ALL_ZERO): Removed.
1518 (UINTS_SET): Likewise.
1519 (UINTS_CLEAR): Likewise.
1520 (UINTS_EQUAL): Likewise.
1521 (cpu_flags_match): Updated.
1522 (smallest_imm_type): Likewise.
1523 (set_cpu_arch): Likewise.
1524 (md_assemble): Likewise.
1525 (optimize_imm): Likewise.
1526 (match_template): Likewise.
1527 (process_suffix): Likewise.
1528 (update_imm): Likewise.
1529 (process_drex): Likewise.
1530 (process_operands): Likewise.
1531 (build_modrm_byte): Likewise.
1532 (i386_immediate): Likewise.
1533 (i386_displacement): Likewise.
1534 (i386_att_operand): Likewise.
1535 (parse_real_register): Likewise.
1536 (md_parse_option): Likewise.
1537 (i386_target_format): Likewise.
1539 2008-02-14 Dimitry Andric <dimitry@andric.com>
1542 * config/tc-arm.c (s_arm_unwind_save): Advance the input line
1543 pointer past the comma after parsing a floating point register
1546 2008-02-14 Hakan Ardo <hakan@debian.org>
1549 * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
1551 (avr_operand): Disallow post-increment addressing in the lpm
1552 instruction for the attiny26.
1554 2008-02-13 Jan Beulich <jbeulich@novell.com>
1556 * config/tc-i386.c (parse_real_register): Don't return 'FLAT'
1557 if not in Intel mode.
1558 (i386_intel_operand): Ignore segment overrides in immediate and
1560 (intel_e11): Range-check i.mem_operands before use as array
1561 index. Filter out FLAT for uses other than as segment override.
1562 (intel_get_token): Remove broken promotion of "FLAT:" to mean
1565 2008-02-13 Jan Beulich <jbeulich@novell.com>
1567 * config/tc-i386.c (intel_e09): Also special-case 'bound'.
1569 2008-02-13 Jan Beulich <jbeulich@novell.com>
1571 * config/tc-i386.c (allow_pseudo_reg): New.
1572 (parse_real_register): Check for NULL just once. Allow all
1573 register table entries when allow_pseudo_reg is non-zero.
1574 Don't allow any registers without type when allow_pseudo_reg
1576 (tc_x86_regname_to_dw2regnum): Replace with ...
1577 (tc_x86_parse_to_dw2regnum): ... this.
1578 (tc_x86_frame_initial_instructions): Adjust for above change.
1579 * config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
1580 (tc_parse_to_dw2regnum): New.
1581 (tc_x86_regname_to_dw2regnum): Replace with ...
1582 (tc_x86_parse_to_dw2regnum): ... this.
1583 * dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
1584 (cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
1587 2008-02-12 Nick Clifton <nickc@redhat.com>
1589 * config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to
1591 (tic4x_insn_add): Likewise.
1592 (md_begin): Drop cast that was discarding a const qualifier.
1593 * config/tc-d30v.c (get_reloc): Add const qualifier to op
1595 (build_insn): Drop cast that was discarding a const qualifier.
1597 2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
1599 * config/tc-i386.c (cpu_arch): Add .xsave.
1600 (md_show_usage): Add .xsave.
1602 * doc/c-i386.texi: Add xsave to -march=.
1604 2008-02-07 Alan Modra <amodra@bigpond.net.au>
1606 * read.c (s_weakref): Don't pass unadorned NULL to concat.
1607 * config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise.
1609 2008-02-05 Sterling Augustine <sterling@tensilica.com>
1611 * config/tc-xtensa.c (relax_frag_immed): Change internal consistency
1612 checks into assertions. When relaxation produces an operation that
1613 does not fit in the current FLIX instruction, make sure that the
1614 operation is relaxed as needed to account for being placed following
1615 the current instruction.
1617 2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
1620 * configure: Regenerated.
1622 2008-02-04 Adam Nemet <anemet@caviumnetworks.com>
1624 * config/tc-mips.c (mips_cpu_info_table): Add Octeon.
1626 2008-01-31 Marc Gauthier <marc@tensilica.com>
1628 * configure.tgt (xtensa*-*-*): Recognize processor variants.
1630 2008-01-25 Kai Tietz <kai.tietz@onevision.com>
1632 * read.c: (emit_expr): Correct for mingw use of printf size
1635 2008-01-24 Bob Wilson <bob.wilson@acm.org>
1637 * doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that
1638 can only be encoded in FLIX instructions but are not specified as such.
1639 (Xtensa Automatic Alignment): Remove obsolete comment about debugging
1642 2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
1644 * NEWS: Mention new command line options for x86 targets.
1646 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
1648 * config/tc-i386.c (md_show_usage): Replace tabs with spaces.
1650 2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
1652 * config/tc-avr.c (mcu_types): Change opcode set for at86rf401.
1654 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
1656 * config/tc-i386.c (md_show_usage): Show more processors for
1659 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
1661 * config/tc-i386.c (i386_target_format): Remove cpummx2.
1663 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
1665 * config/tc-i386.c (XXX_PREFIX): Moved from tc-i386.h.
1666 (XXX_MNEM_SUFFIX): Likewise.
1667 (END_OF_INSN): Likewise.
1668 (templates): Likewise.
1669 (modrm_byte): Likewise.
1670 (rex_byte): Likewise.
1671 (DREX_XXX): Likewise.
1672 (drex_byte): Likewise.
1673 (sib_byte): Likewise.
1674 (processor_type): Likewise.
1675 (arch_entry): Likewise.
1676 (cpu_sub_arch_name): Remove const.
1677 (cpu_arch): Add .vmx and .smx.
1678 (set_cpu_arch): Append cpu_sub_arch_name.
1679 (md_parse_option): Support -march=CPU[,+EXTENSION...].
1680 (md_show_usage): Updated.
1682 * config/tc-i386.h (XXX_PREFIX): Moved to tc-i386.c.
1683 (XXX_MNEM_SUFFIX): Likewise.
1684 (END_OF_INSN): Likewise.
1685 (templates): Likewise.
1686 (modrm_byte): Likewise.
1687 (rex_byte): Likewise.
1688 (DREX_XXX): Likewise.
1689 (drex_byte): Likewise.
1690 (sib_byte): Likewise.
1691 (processor_type): Likewise.
1692 (arch_entry): Likewise.
1694 * doc/as.texinfo: Update i386 -march option.
1696 * doc/c-i386.texi: Update -march= for ISA.
1698 2008-01-18 Bob Wilson <bob.wilson@acm.org>
1700 * config/tc-xtensa.c (xtensa_leb128): New function.
1701 (md_pseudo_table): Use it for sleb128 and uleb128.
1702 (is_leb128_expr): New internal flag.
1703 (xtensa_symbol_new_hook): Check new flag.
1705 2008-01-16 Eric B. Weddington <eric.weddington@atmel.com>
1707 * config/tc-avr.c (mcu_types): Change opcode set for avr3,
1708 at90usb82, at90usb162.
1709 * doc/c-avr.texi: Change architecture grouping for at90usb82,
1711 These changes support the new avr35 architecture group in gcc.
1713 2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
1715 * config/tc-i386.c (md_assemble): Also zap movzx and movsx
1716 suffix for AT&T syntax.
1718 2008-01-14 H.J. Lu <hongjiu.lu@intel.com>
1720 * config/tc-i386.c (match_reg_size): New.
1721 (match_mem_size): Likewise.
1722 (operand_size_match): Likewise.
1723 (operand_type_match): Also clear all size fields.
1724 (match_template): Skip Intel syntax when in AT&T syntax.
1725 Call operand_size_match to check operand size.
1726 (i386_att_operand): Set the mem field to 1 for memory
1728 (i386_intel_operand): Likewise.
1730 2008-01-12 H.J. Lu <hongjiu.lu@intel.com>
1733 * config/tc-i386.c (_i386_insn): Update comment.
1734 (operand_type_match): Also clear unspecified.
1735 (operand_type_register_match): Likewise.
1736 (parse_operands): Initialize unspecified.
1737 (i386_intel_operand): Likewise.
1738 (match_template): Check memory and accumulator operand size.
1739 (i386_att_operand): Clear unspecified on register operand.
1740 (intel_e11): Likewise.
1741 (intel_e09): Set operand size and clean unspecified for
1744 2008-01-11 Andreas Schwab <schwab@suse.de>
1746 * read.c (s_space): Declare `repeat' as offsetT.
1748 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
1750 * config/tc-i386.c (match_template): Check processor support
1753 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
1755 * config/tc-i386.c (match_template): Continue if processor
1758 2008-01-09 Alexandre Oliva <aoliva@redhat.com>
1760 * config/tc-ia64.c (ia64_convert_frag): Zero-initialize room for
1761 unwind personality function address.
1763 2008-01-09 Bob Wilson <bob.wilson@acm.org>
1765 * dwarf2dbg.c (out_sleb128): Delete.
1766 (size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
1767 (out_fixed_inc_line_addr): Delete.
1768 (relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
1769 size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
1770 (dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
1771 (process_entries): Remove calls to out_fixed_inc_line_addr. When
1772 DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
1773 * read.h (emit_expr_fix): New prototype.
1774 * read.c (emit_expr): Move code to emit_expr_fix and use it here.
1775 (emit_expr_fix): New.
1777 2008-01-09 H.J. Lu <hongjiu.lu@intel.com>
1779 * config/tc-i386.c (match_template): Check register size
1780 only when size of operands can be encoded the canonical way.
1782 2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
1784 * config/tc-i386.c (i386_operand): Renamed to ...
1785 (i386_att_operand): This.
1786 (parse_operands): Updated.
1788 2008-01-05 H.J. Lu <hongjiu.lu@intel.com>
1790 * doc/c-i386.texi: Update .att_mnemonic and .intel_mnemonic.
1792 * config/tc-i386.c (set_intel_mnemonic): Set intel_mnemonic
1794 (md_assemble): Remove Intel mode workaround.
1795 (match_template): Check support for old gcc, AT&T mnemonic
1797 (md_parse_option): Don't set intel_mnemonic to 0 for
1800 2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
1802 * config/tc-i386.h: Update copyright to 2008.
1804 2008-01-04 Nick Clifton <nickc@redhat.com>
1806 * config/tc-ppc.c (parse_cpu): Preserve the settings of the
1807 PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags.
1809 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1811 * config/tc-i386.c (md_assemble): Use !intel_mnemonic instead
1814 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1816 * gas/config/tc-i386.c (cpu_arch_flags_not): Removed.
1817 (cpu_flags_not): Likewise.
1818 (cpu_flags_match): Updated to check 64bit and arch.
1819 (set_code_flag): Remove cpu_arch_flags_not.
1820 (set_16bit_gcc_code_flag): Likewise.
1821 (set_cpu_arch): Likewise.
1822 (md_begin): Likewise.
1823 (parse_insn): Call cpu_flags_match to check 64bit and arch.
1824 (match_template): Likewise.
1826 2008-01-03 Jakub Jelinek <jakub@redhat.com>
1828 * config/tc-i386.c (process_drex): Initialize modrm_reg and
1829 modrm_regmem to 0 instead of None.
1831 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1833 * config/tc-i386.c (match_template): Use the xmmword field
1836 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
1838 * config/tc-i386.c (process_suffix): Fix a typo.
1840 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
1843 * config/tc-i386.c (match_template): Handle XMMWORD_MNEM_SUFFIX.
1844 Check memory size in Intel mode.
1845 (process_suffix): Handle XMMWORD_MNEM_SUFFIX.
1846 (intel_e09): Likewise.
1848 * config/tc-i386.h (XMMWORD_MNEM_SUFFIX): New.
1850 2008-01-02 Catherine Moore <clm@codesourcery.com>
1852 * config/tc-mips.c (mips_ip): Check operands on jalr instruction.
1854 For older changes see ChangeLog-2007
1860 version-control: never