1 2008-09-29 Nick Clifton <nickc@redhat.com>
3 * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of
4 tc_cfi_emit_pcrel_expr macro.
6 2008-09-29 Peter O'Gorman <pogma@thewrittenword.com>
7 Steve Ellcey <sje@cup.hp.com>
9 * configure: Regenerate for new libtool.
12 * doc/Makefile.in: Ditto.
14 2008-09-29 Nick Clifton <nickc@redhat.com>
17 * app.c (do_scrub_chars): Only issue warnings about tick
18 characters detected in symbol strings if hex ticks are supported.
20 2008-09-29 Nick Clifton <nickc@redhat.com>
22 * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of
23 tc_cfi_emit_pcrel_expr macro.
25 2008-09-28 Daniel Jacobowitz <dan@codesourcery.com>
27 * NEWS: Mention .cfi_val_encoded_addr.
29 2008-09-26 Eric Botcazou <ebotcazou@adacore.com>
31 * Makefile.am (TARG_ENV_HFILES): Add config/te-solaris.h.
32 * Makefile.in (TARG_ENV_HFILES): Likewise.
33 * configure.tgt (Solaris targets): Set em=solaris.
34 * config/te-solaris.h: New file.
36 2008-09-26 Jie Zhang <jie.zhang@analog.com>
38 * config/bfin-parse.y (asm_1): Fix reduce/reduce conflicts.
40 2008-09-24 Richard Henderson <rth@redhat.com>
42 * dw2gencfi.c (DWARF2_ADDR_SIZE): Provide default.
43 (struct cfi_insn_data): Add ea member.
44 (CFI_val_encoded_addr, dot_cfi_val_encoded_addr): New.
45 (output_cfi_insn): Handle CFI_val_encoded_addr.
46 (select_cie_for_fde): Don't match CFI_val_encoded_addr.
47 * doc/as.texinfo (.cfi_val_encoded_addr): Document.
49 2008-09-25 Alan Modra <amodra@bigpond.net.au>
52 * listing.c (print_options): Don't call fprintf without format string.
54 2008-09-19 Alan Modra <amodra@bigpond.net.au>
56 * write.c (TC_FORCE_RELOCATION_SUB_LOCAL): Heed md_register_arithmetic.
57 (TC_VALIDATE_FIX_SUB): Likewise.
58 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
59 * config/tc-hppa.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
60 * config/tc-mn10300.h (TC_VALIDATE_FIX_SUB): Likewise.
61 * config/tc-sh.h (TC_VALIDATE_FIX_SUB): Likewise.
62 (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
63 * config/tc-sh64.h (TC_VALIDATE_FIX_SUB): Likewise.
64 * config/tc-xtensa.h (TC_VALIDATE_FIX_SUB): Likewise.
65 * doc/internals.texi (TC_FORCE_RELOCATION_SUB_ABS,
66 TC_FORCE_RELOCATION_SUB_LOCAL, TC_VALIDATE_FIX_SUB): Show new param.
68 * write.c (md_register_arithmetic): Define.
69 (fixup_segment): Adjust TC_FORCE_RELOCATION_SUB_ABS invocation.
70 Modify error message when registers involved.
71 (TC_FORCE_RELOCATION_SUB_ABS): Heed md_register_arithmetic.
72 * config/tc-sh.h (TC_FORCE_RELOCATION_SUB_ABS): Likewise.
74 2008-09-15 Alan Modra <amodra@bigpond.net.au>
76 * write.c (install_reloc): Correct EMIT_SECTION_SYMBOLS test.
78 2008-09-15 Alan Modra <amodra@bigpond.net.au>
80 * config/tc-frv.c (md_apply_fix): Use abs_section_sym for
81 relocs with no symbol.
82 * config/tc-mmix.c (md_assemble): Mark fake symbol on
83 BFD_RELOC_MMIX_BASE_PLUS_OFFSET as OK for use by relocs.
84 (mmix_md_end): Likewise mark mmix reg contents section symbol.
86 2008-09-14 Chris Smith <chris@zxdesign.info>
88 * config/tc-z80.c: Opcode generation of ld a,(bc) and ld a,(de) was
89 broken, as the opcode of ld a,(de) was being emitted for both.
91 2008-09-12 Sterling Augustine <sterling@tensilica.com>
93 * config/tc-xtensa.c (init_op_placement_info_table): Allow number of
94 operands equal to MAX_INSN_ARGS.
96 2008-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
98 * configure.in: Call AC_SYS_LARGEFILE.
99 * config.in: Regenerate.
100 * configure: Regenerate.
102 2008-09-09 Peter Bergner <bergner@vnet.ibm.com>
104 * config/tc-ppc.c (ppc_setup_opcodes): Simplify POWER4/NOPOWER4 test.
105 Remove POWER5 and POWER6 tests.
107 2008-09-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
109 * config/tc-hppa.c (hppa_regname_to_dw2regnum): Add register name to
110 number support for 32-bit targets.
112 2008-09-08 Tristan Gingold <gingold@adacore.com>
114 * NEWS: Add a marker for the 2.19 features.
116 2008-09-07 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
118 * config/tc-hppa.h (DIFF_EXPR_OK): Define for SOM target. Revise
119 comment regarding use of difference expressions.
120 (TC_FORCE_RELOCATION_SUB_LOCAL): Define to 1.
122 * dw2gencfi.c (CFI_DIFF_EXPR_OK): Define if not defined.
123 (dot_cfi_personality): Use CFI_DIFF_EXPR_OK instead of DIFF_EXPR_OK.
124 (dot_cfi_lsda, output_cie, output_fde): Likewise.
125 * config/tc-hppa.h (CFI_DIFF_EXPR_OK): Define.
127 2008-09-06 Richard Sandiford <rdsandiford@googlemail.com>
129 * config/tc-mips.h (DWARF2_FDE_RELOC_SIZE): Define.
131 2008-09-03 Nick Clifton <nickc@redhat.com>
133 * config/tc-i386.c (pe_lcomm_internal): New function. Allows the
134 alignment field of the .lcomm directive to be optional.
135 (pe_lcomm): New function. Pass pe_lcomm_internal to
137 (md_pseudo_table): Implement .lcomm directive for COFF based
139 * doc/c-i386.texi (i386-Directives): New node. Used to document
140 the .lcomm directive.
142 2008-08-30 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
144 * config/tc-hppa.h: Don't define DWARF2_EH_FRAME_READ_ONLY on Linux
147 2008-08-29 Eric B. Weddington <eric.weddington@atmel.com>
149 * config/tc-avr.c (mcu_types): Add atmega16u4.
150 * doc/c-avr.texi: Likewise.
152 2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
154 * config/tc-ia64.c (CR_IIB0): New.
156 (cr): Add cr.iib0 and cr.iib1.
157 (specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.
159 2008-08-28 Jan Beulich <jbeulich@novell.com>
161 * config/tc-i386.c (md_assemble): Force number of displacement
162 operands to zero when processing string instruction.
163 (i386_index_check): Special-case string instruction operands. Don't
164 fudge address prefix if there already was a memory operand. Fix
165 error message to correctly reflect the addressing mode used.
166 (i386_att_operand): Fix comment.
167 (i386_intel_operand): Snapshot, clear, and restore base and index
168 reg for each operand processed. Increment count of memory operands
171 2008-08-27 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
173 * config/tc-hppa.c (is_SB_relative): New macro.
174 (fix_new_hppa): Remove $segrel$ marker.
175 (cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is
177 * config/tc-hppa.h (tc_frob_symbol): Check for $segrel$.
179 2008-08-27 Jan Beulich <jbeulich@novell.com>
181 * config/tc-i386.c (check_string): Use register_prefix for error
183 (process_operands): Likewise.
185 2008-08-26 Mark Mitchell <mark@codesourcery.com>
187 * c-arm.texi: Add tutorial on ARM unwinding pseudo ops.
189 2008-08-26 Jie Zhang <jie.zhang@analog.com>
191 * config/bfin-parse.y (check_macfunc_option): Fix instruction
193 (asm_1): Check mode for 16-bit multiply instructions.
195 2008-08-24 Alan Modra <amodra@bigpond.net.au>
197 * configure.in: Update a number of obsolete autoconf macros.
198 * configure: Regenerate.
199 * aclocal.m4: Regenerate.
201 2008-08-22 Nick Clifton <nickc@redhat.com>
203 * config/tc-mcore.c (md_assemble): Increase length of name array
204 to include terminating NUL.
206 2008-08-22 Jie Zhang <jie.zhang@analog.com>
208 * config/bfin-lex.l (NUMBER): Protect special `.'.
210 2008-08-22 Alan Modra <amodra@bigpond.net.au>
212 * symbols.c (symbol_clone): Ensure clones are not external.
214 2008-08-22 Alan Modra <amodra@bigpond.net.au>
216 * config/tc-hppa.c (md_begin): Set BSF_KEEP for "dummy_symbol".
218 2008-08-21 Richard Henderson <rth@redhat.com>
220 * dw2gencfi.c (DWARF2_FDE_RELOC_SIZE): New.
221 (output_cie, output_fde): Use it.
222 (DWARF2_EH_FRAME_READ_ONLY): New.
223 (cfi_finish): Use it.
225 * config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit.
226 (DWARF2_CIE_DATA_ALIGNMENT): Change sign.
227 (DWARF2_EH_FRAME_READ_ONLY): New.
228 * config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations
229 from the results of DIFF_EXPR_OK manipulation.
231 2008-08-21 Sterling Augustine <sterling@tensilica.com>
233 * config/xtensa-istack.h (MAX_INSN_ARGS): Increase to 64.
235 2008-08-20 Bob Wilson <bob.wilson@acm.org>
237 * config/tc-xtensa.c (O_tlsfunc, O_tlsarg, O_tlscall): Define.
238 (O_tpoff, O_dtpoff): Define.
239 (suffix_relocs): Add entries for TLS suffixes.
240 (xtensa_elf_cons): Check for invalid use of TLS relocations.
241 (map_operator_to_reloc): Add is_literal parameter and use it to
242 control translating TLS instruction relocations to the corresponding
244 (xg_valid_literal_expression): Allow TLS operators.
245 (xg_build_to_insn): Copy TLS operators from pseudo-instruction
246 operands to generated literals.
247 (xg_assemble_literal): Handle TLS operators. Update call to
248 map_operator_to_reloc.
249 (md_assemble): Handle CALLXn.TLS pseudo-instruction.
250 (md_apply_fix): Handle TLS relocations.
251 (emit_single_op): Handle TLS operators.
252 (convert_frag_immed): Update call to map_operator_to_reloc.
253 (vinsn_to_insnbuf): Emit relocations for TLS-related instructions.
254 * config/xtensa-istack.h (tinsn_struct): Add tls_reloc field.
255 * config/xtensa-relax.c (append_literal_op): Add src_op parameter
256 to initialize the op_data field of the BuildOp.
257 (build_transition): Use it here to record the source operand
258 corresponding to a generated literal.
259 * config/xtensa-relax.h (build_op): Comment op_data use for literals.
261 2008-08-20 H.J. Lu <hongjiu.lu@intel.com>
263 AVX Programming Reference (August, 2008)
264 * config/tc-i386.c (CPU_FLAGS_AES_MATCH): New.
265 (CPU_FLAGS_AVX_MATCH): Likewise.
266 (CPU_FLAGS_32BIT_MATCH): Updated.
267 (cpu_flags_match): Likewise.
269 2008-08-20 Alan Modra <amodra@bigpond.net.au>
272 * write.c (install_reloc): Check that reloc symbols have been
274 (set_symtab): Mark symbols with BSF_KEEP.
276 2008-08-18 H.J. Lu <hongjiu.lu@intel.com>
278 * config/tc-i386.c (i386_align_code): Fix a comment typo.
280 2008-08-15 Alan Modra <amodra@bigpond.net.au>
283 * configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
284 * Makefile.in: Regenerate.
285 * aclocal.m4: Regenerate.
286 * config.in: Regenerate.
287 * configure: Regenerate.
288 * doc/Makefile.in: Regenerate.
290 2008-08-14 Alan Modra <amodra@bigpond.net.au>
292 * config/tc-tic4x.c (tic4x_operands_parse): Make static.
294 2008-08-13 Ben Elliston <bje@au.ibm.com>
296 * doc/as.texinfo (Align): Document the PowerPC behaviour.
298 2008-08-13 Alan Modra <amodra@bigpond.net.au>
300 * as.c, as.h, ecoff.c, hash.c, macro.c, symbols.c, config/obj-evax.c,
301 config/obj-som.c, config/tc-alpha.c, config/tc-arm.c, config/tc-bfin.c,
302 config/tc-bfin.h, config/tc-crx.c, config/tc-frv.c, config/tc-frv.h,
303 config/tc-hppa.h, config/tc-i386.c, config/tc-i860.c, config/tc-i960.h,
304 config/tc-ia64.c, config/tc-ia64.h, config/tc-m32c.c, config/tc-m32c.h,
305 config/tc-m68k.c, config/tc-maxq.c, config/tc-s390.c, config/tc-s390.h,
306 config/tc-sparc.c, config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
307 config/tc-tic4x.c, config/tc-tic4x.h, config/tc-tic54x.c,
308 config/tc-tic54x.h, config/tc-vax.c, doc/internals.texi: Banish PARAMS
309 and PTR. Convert to ISO C. Delete unnecessary forward declarations.
311 2008-08-12 Alan Modra <amodra@bigpond.net.au>
313 * config/tc-arm.c (s_unreq): Adjust hash_delete call.
314 * config/tc-ia64.c (dot_rot): Likewise.
316 2008-08-11 Alan Modra <amodra@bigpond.net.au>
319 * hash.c: Expand PTR to void *.
320 (hash_delete): Add "freeme" parameter. Call obstack_free.
321 * hash.h: Expand PTR to void *.
322 (hash_delete): Update prototype.
323 * macro.c (macro_expand_body): hash_delete LOCALs from formal_hash.
324 * config/tc-tic54x.c (tic54x_remove_local_label): Update hash_delete
326 (subsym_substitute): Likewise.
327 * doc/internals.texi (hash_delete): Update.
329 2008-08-08 Anatoly Sokolov <aesok@post.ru>
331 * config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
332 architectures. Reorganize list to put mcu types in correct
333 architectures and to order list same as in GCC. Use new ISA
334 definitions in include/opcode/avr.h.
335 * doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
336 descriptions. Reorganize descriptions to put mcu types in correct
337 architectures and to order lists same as in GCC.
339 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
340 Daniel Jacobowitz <dan@codesourcery.com>
342 * config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
343 (OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
344 (OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
345 (OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
346 (md_longopts): Add -call_nonpic.
347 (md_parse_option): Handle OPTION_CALL_NONPIC.
348 (md_show_usage): Add -call_nonpic.
350 2008-08-08 Sterling Augustine <sterling@tensilica.com>
352 * config/tc-xtensa.c (exclude_section_from_property_tables): New.
353 (xtensa_create_property_segments): Use it.
354 (xtensa_create_xproperty_segments): Likewise.
356 2008-08-08 Alan Modra <amodra@bigpond.net.au>
358 * doc/internals.texi (DWARF2_FORMAT): Update for 2008-08-04 change.
360 2008-08-06 Richard Sandiford <rdsandiford@googlemail.com>
362 * config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
363 (lo16_reloc_p): New functions.
364 (reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
365 generalize relocation checks.
366 (matching_lo_reloc): New function.
367 (fixup_has_matching_lo_p): Use it.
368 (mips16_mark_labels): Don't clobber a symbol's visibility.
369 (append_insn): Use hi16_reloc_p and lo16_reloc_p.
370 (mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
371 (md_apply_fix): Likewise.
372 (mips16_percent_op): Add %got and %call16.
373 (mips_frob_file): Use got16_reloc_p to generalize relocation checks.
374 Use matching_lo_reloc.
375 (mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
376 generalize relocation checks.
377 (mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
380 2008-08-06 DJ Delorie <dj@redhat.com>
382 * NEWS: Mention these changes.
384 * config/tc-h8300.h (H_TICK_HEX): Define.
385 * config/tc-h8300.c (OPTION_H_TICK_HEX): New.
386 (md_longopts): Add "-h-tick-hex".
387 (md_parse_option): Support it.
388 * doc/c-h8300.texi (H8/300 Options): Document it.
389 * doc/as.texinfo (Overview): Likewise.
391 * config/tc-sh.h (H_TICK_HEX): Define.
392 * config/tc-sh.c (OPTION_H_TICK_HEX): New.
393 (md_longopts): Add "-h-tick-hex".
394 (md_parse_option): Support it.
395 * doc/c-sh.texi (SH Options): Document it.
396 * doc/c-sh64.texi (SH64 Options): Document it.
397 * doc/as.texinfo (Overview): Likewise.
399 2008-08-05 Alan Modra <amodra@bigpond.net.au>
402 * dwarf2dbg.c (dwarf2_directive_file): Disable gas generated
403 debug info if we see compiler generated debug info.
404 (dwarf2_directive_loc): Likewise. Remove redundant debug_type test.
406 2008-08-04 Alan Modra <amodra@bigpond.net.au>
408 * dwarf2dbg.c: Remove superfluous forward function declarations.
409 (DWARF2_FORMAT): Add section arg.
410 (out_header): New function, split out from..
411 (out_debug_line): ..here.
412 (out_debug_aranges): Use out_header.
413 (out_debug_abbrev): Add info_seg and line_seg args. Use
414 DW_FORM_data8 (for DW_AT_stmt_list) if line_seg is 64-bit.
415 (out_debug_info): Use out_header. Output 8 byte DW_AT_stmt_list
416 if line_seg is 64-bit.
417 (dwarf2_finish): Adjust out_debug_abbrev call.
418 * config/tc-mips.h (DWARF2_FORMAT, mips_dwarf2_format): Add sec arg.
419 * config/tc-mips.c (mips_dwarf2_format): Likewise.
421 2008-08-04 Alan Modra <amodra@bigpond.net.au>
423 * Makefile.am (POTFILES.in): Set LC_ALL=C.
424 * Makefile.in: Regenerate.
425 * po/POTFILES.in: Regenerate.
427 2008-08-01 Peter Bergner <bergner@vnet.ibm.com>
429 * config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
430 Handle -mvsx and -mpower7.
431 (md_show_usage): Document -mpower7 and -mvsx.
432 * doc/as.texinfo (Target PowerPC): Document -mvsx.
433 * doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
435 2008-07-31 Peter Bergner <bergner@vnet.ibm.com>
437 * config/tc-ppc.c (parse_cpu) <power6>: Accept Altivec instructions.
440 2008-07-30 Michael J. Eager <eager@eagercon.com>
442 * config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
443 (md_show_usage): Likewise.
445 2008-07-30 Alan Modra <amodra@bigpond.net.au>
447 * messages.c, symbols.c, write.c: Silence gcc warnings.
449 2008-07-28 Ineiev <ineiev@yahoo.co.uk>
451 * config/tc-i386.c (operand_type_check): Warning fix.
453 2008-07-26 Michael Eager <eager@eagercon.com>
455 * doc/as.texinfo: Add description of single-precision attribute.
457 2008-07-24 Jie Zhang <jie.zhang@analog.com>
459 * config/bfin-parse.y (asm_1): Error if plain symbol is used
460 as load/store offset.
462 2008-07-22 Chao-ying Fu <fu@mips.com>
464 * config/tc-mips.c (mips_ip): Reset s to argsStart.
466 2008-07-22 Jie Zhang <jie.zhang@analog.com>
468 * config/tc-bfin.c (bfin_gen_loop): Remove loop symbol.
470 2008-07-21 DJ Delorie <dj@redhat.com>
472 * config/tc-h8300.c (fix_operand_size): Use the default size
473 specified by the .lbranch/.sbranch pseudos.
475 2008-07-18 DJ Delorie <dj@redhat.com>
477 * config/tc-m32c.h (H_TICK_HEX): Define.
478 * config/tc-m32c.c (OPTION_H_TICK_HEX): Define.
479 (md_longopts): Add support for it.
480 (md_parse_option): Likewise.
481 * doc/as.texinfo (Overview): Add new m32c options.
482 * doc/c-m32c.texi (M32C-Modifiers): Likewise
484 * as.h: (enable_h_tick_hex): New.
485 * app.c (enable_h_tick_hex): New.
487 (do_scrub_begin): Mark 'H' and 'h' as special if enable_h_tick_hex.
488 (do_scrub_chars): If enable_h_tick_hex and 'h', check for H'00
489 style hex constants and convert the input stream to 0x00 style.
490 (do_scrub_chars): If a 'X style character constant is found after
491 a symbol character (like you're or X'00), warn the user.
493 2008-07-10 Richard Sandiford <rdsandiford@googlemail.com>
495 * config/tc-mips.c (mips16_mark_labels): Use ELF_ST_SET_MIPS16.
496 (mips_fix_adjustable): Likewise.
497 (mips_frob_file_after_relocs): Likewise.
499 2008-07-08 Nathan Sidwell <nathan@codesourcery.com>
501 * config/tc-m68k.c (m68k_set_cpu, m68k_set_arch): Don't complain
502 about overriding an earlier setting.
504 2008-07-07 Adam Nemet <anemet@caviumnetworks.com>
506 * config/tc-mips.c (NO_ISA_COP): New macro.
507 (COP_INSN): New macro.
508 (is_opcode_valid): Use them.
509 (macro) <ld_st>: Use them. Don't accept coprocessor load store
510 insns based on the ISA if CPU is NO_ISA_COP.
511 <copz>: Likewise for coprocessor operations.
513 2008-07-07 Paul Brook <paul@codesourcery.com>
515 * config/tc-arm.c (arm_fix_adjustable): Don't adjust MOVW/MOVT
518 2008-07-07 Ralf Corsépius <ralf.corsepius@rtems.org>
520 * configure.tgt: Add bfin-*-rtems*.
522 2008-07-04 Alan Modra <amodra@bigpond.net.au>
524 * config/tc-spu.c (md_apply_fix): Handle fully resolved
525 BFD_RELOC_32_PCREL, BFD_RELOC_SPU_HI16 and BFD_RELOC_SPU_LO16.
527 2008-06-25 Peter Bergner <bergner@vnet.ibm.com>
529 * config/tc-ppc.c (parse_cpu): Handle -m464.
530 (md_show_usage): Likewise.
532 2008-06-24 Eric B. Weddington <eric.weddington@atmel.com>
534 Add support for ATtiny13A.
535 * config/tc-avr.c (mcu_types): Add attiny13a.
536 * doc/c-avr.texi: Likewise.
538 2008-06-24 Bob Wilson <bob.wilson@acm.org>
539 Alan Modra <amodra@bigpond.net.au>
541 * write.c (relax_segment <rs_org>): Include current stretch
542 value when calculating whether .org is backwards.
544 2008-06-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
546 * configure: Regenerate.
548 2008-06-17 Nick Clifton <nickc@redhat.com>
550 * app.c (do_scrub_chars): Do not UNGET an EOF value.
552 2008-06-16 Hans-Peter Nilsson <hp@bitrange.com>
555 * config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
556 text_section. Do the "stepping backwards" test for text_section
557 using unsigned operands.
559 2008-06-13 Peter Bergner <bergner@vnet.ibm.com>
561 * config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
562 (ppc_insert_operand): Likewise.
563 (ppc_machine): Likewise.
564 * config/tc-ppc.h: #include "opcode/ppc.h"
565 (struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
566 (ppc_cpu): Update extern decl.
568 2008-06-12 Adam Nemet <anemet@caviumnetworks.com>
570 * config/tc-mips.c (validate_mips_insn): Handle field descriptors
571 +x, +X, +p, +P, +s, +S.
574 * config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
576 (macro_build): Likewise.
577 (CPU_HAS_SEQ): New macro.
578 (macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
580 2008-06-09 Eric B. Weddington <eric.weddington@atmel.com>
582 * config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
583 * doc/c-avr.texi: Likewise.
585 2008-06-04 Nick Clifton <nickc@redhat.com>
587 * app.c (do_scrub_chars): Do not UNGET an EOF value.
589 2008-06-03 H.J. Lu <hongjiu.lu@intel.com>
591 * config/tc-i386.c (set_sse_check): New.
592 (md_pseudo_table): Add "sse_check".
594 2008-06-03 Paul Brook <paul@codesourcery.com>
596 * config/tc-arm.c (do_t_rbit): Populate both rm fields.
598 2008-05-30 Nick Clifton <nickc@redhat.com>
601 * config/tc-avr.c (avr_ldi_expression): Do not warn about unknown
604 2008-05-29 Maxim Kuvyrkov <maxim@codesourcery.com>
606 * config/tc-mips.c (mips_cpu_info_table): Move records for
607 ST Loongson-2E/2F processors to a better place.
609 2008-05-23 H.J. Lu <hongjiu.lu@intel.com>
612 * config/tc-i386.c (match_template): Report ambiguous operand
613 size, not invalid suffix when there is no match in Intel
616 2008-05-22 Paul Brook <paul@codesourcery.com>
618 * config/tc-arm.c (parse_cond): Covert to lowercase before matching.
620 2008-05-21 I-Jui Sung <ijsung@gmail.com>
622 * config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE
623 compatible cores: fa526, fa626, fa626te, fa726te.
624 * doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te,
627 2008-05-14 Alan Modra <amodra@bigpond.net.au>
629 * Makefile.am: Run "make dep-am".
630 * Makefile.in: Regenerate.
631 * doc/Makefile.in: Regenerate.
632 * po/POTFILES.in: Regenerate.
634 2008-05-09 Catherine Moore <clm@codesourcery.com>
636 * config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
637 with non-MIPS16 relocs.
639 2008-05-09 Chao-ying Fu <fu@mips.com>
641 * config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
642 case that some characters append at the end of the name.
644 (s_change_sec): Likewise.
645 (md_section_align): Likewise.
647 2008-05-07 Bob Wilson <bob.wilson@acm.org>
649 * config/tc-xtensa.c (xtensa_create_property_segments): Use
650 xtensa_make_property_section instead of xtensa_get_property_section.
651 (xtensa_create_xproperty_segments): Likewise.
653 2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
655 * NEWS: Mention XSAVE, EPT and MOVBE.
657 * config/tc-i386.c (cpu_arch): Add .movbe and .ept.
658 (md_show_usage): Add .movbe and .ept.
660 * doc/c-i386.texi: Add movbe and ept to -march=. Document
663 2008-04-29 David S. Miller <davem@davemloft.net>
665 * config/tc-sparc.c (v9a_asr_table): Fix order of softint entries.
667 2008-04-28 Adam Nemet <anemet@caviumnetworks.com>
669 * config/tc-mips.c (file_mips_soft_float, file_mips_single_float):
671 (OPTION_ELF_BASE): Make room for new option macros.
672 (OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
673 OPTION_DOUBLE_FLOAT): New option macros.
674 (md_longopts): Add msoft-float, mhard-float, msingle-float and
676 (md_parse_option): Handle OPTION_SINGLE_FLOAT,
677 OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
678 (md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
680 (struct mips_set_options): New fields soft_float and single_float.
681 (mips_opts): Initialized them. Add comment for each field
683 (mips_after_parse_args): Set them based on file_mips_soft_float
684 and file_mips_single_float.
685 (s_mipsset): Add support for `.set softfloat', `.set hardfloat',
686 `.set singlefloat' and `.set doublefloat'.
687 (is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
688 Handle single-float and soft-float instructions here.
689 (macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
690 (is_opcode_valid_16): New function.
691 (mips16_ip): Use it instead of OPCODE_IS_MEMBER.
692 (macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
693 M_S_DOB>: Remove special-casing of r4650.
694 * doc/c-mips.texi (-march=): Add Octeon.
695 (MIPS Opts): Document -msoft-float and -mhard-float. Document
696 -msingle-float and -mdouble-float.
697 (MIPS floating-point): New section. Document `.set softfloat' and
698 `.set hardfloat'. Document `.set singlefloat' and `.set
701 2008-04-25 David S. Miller <davem@davemloft.net>
703 * config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
706 * doc/c-sparc.texi: Consistently refer to architecture 'versions',
707 rather than occaisionally 'levels'. Consistently refer to Sun's
708 UNIX variant as SunOS, every version of Solaris is also SunOS.
709 Document new 'softint_clear' and 'softint_set' aliases. Clarify
710 which architecture versions support '%dcr', '%cq', and '%gl'. Add
711 section on 32-bit/64-bit opcode translations.
713 2008-04-23 Mike Frysinger <vapier@gentoo.org>
715 * Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
716 (OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
717 (obj-fdpicelf.o): Define.
718 * Makefile.in: Regenerate.
719 * configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
721 (bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
722 (bfin-*-uclinux*): New; set fmt to elf and em to linux.
723 * config/obj-fdpicelf.c: New.
724 * config/obj-fdpicelf.h: Likewise.
725 * config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
726 the OBJ_FDPIC_ELF define.
727 (OPTION_NOPIC): Define.
728 (md_longopts): Add mnopic and mno-fdpic.
729 (md_parse_option): Handle OPTION_NOPIC.
731 2008-04-23 Paolo Bonzini <bonzini@gnu.org>
733 * aclocal.m4: Regenerate.
734 * configure: Regenerate.
736 2008-04-23 David S. Miller <davem@davemloft.net>
738 * config/tc-sparc.c (v9a_asr_table): Add missing
739 'stick' and 'stick_cmpr', and document ordering rules
741 (tc_gen_reloc): Accept BFD_RELOC_SPARC_PC22 and
742 BFD_RELOC_SPARC_PC10.
743 * doc/c-sparc.texi: New section on Sparc constants.
744 Add documentation for %stick and %stick_cmpr.
746 2008-04-22 David S. Miller <davem@davemloft.net>
748 * config/obj-elf.c (obj_elf_section_type): Add prototype
749 before obj_elf_section_word and add 'warn' arg.
750 (obj_elf_section_word): Add type pointer arg, and if no #SECTION
751 is matched, try checking for #SECTION_TYPE.
752 (obj_elf_section): Adjust for new args.
753 (obj_elf_type_name): New function.
754 (obj_elf_type): Call it, and accept STT_foo number strings
755 in .type statements as output by SunPRO compiler.
757 2008-04-22 H.J. Lu <hongjiu.lu@intel.com>
759 * config/tc-i386.c (md_assemble): Don't check SSE instructions
762 2008-04-18 David S. Miller <davem@davemloft.net>
764 * doc/c-sparc.texi: Add syntax section.
766 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
768 * config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
769 REG and NDS for instructions with immediate operand.
771 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
773 * config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
776 2008-04-16 David S. Miller <davem@davemloft.net>
778 * config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics
779 and relocation generation.
780 (tc_gen_reloc): Likewise.
782 2008-04-15 Andrew Stubbs <andrew.stubbs@st.com>
784 * config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4
785 relocations are properly aligned, and not negative.
787 2008-04-15 Khem Raj <kraj@mvista.com>
789 * doc/tc-arm.texi: Fix fnstart and fnend directive names.
791 2008-04-14 Edmar Wienskoski <edmar@freescale.com>
793 * config/tc-ppc.c (parse_cpu): Handle "e500mc". Extend "e500" to
794 accept e500mc instructions.
795 (md_show_usage): Document -me500mc.
797 2008-04-11 Nick Clifton <nickc@redhat.com>
799 * listing.c (print_timestamp): Use localtime rather than
800 localtime_r since not all build environments provide the latter.
802 2008-04-10 H.J. Lu <hongjiu.lu@intel.com>
804 * NEWS: Mention -msse-check=[none|error|warning].
806 * config/tc-i386.c (sse_check): New.
807 (OPTION_MSSE_CHECK): Likewise.
808 (md_assemble): Check SSE instructions if needed.
809 (md_longopts): Add -msse-check.
810 (md_parse_option): Handle OPTION_MSSE_CHECK.
811 (md_show_usage): Show -msse-check=[none|error|warning].
813 * doc/c-i386.texi: Document -msse-check=[none|error|warning].
815 2008-04-10 Santiago Urueña <suruena@gmail.com>
817 * listing.c: Add -ag listing flag to show general information in
818 listings such as gas version, passed options, and time stamp.
819 (listing_general_info): New function.
820 (print_options): New function.
821 (print_single_option): New function.
822 (print_timestamp): New function.
823 (MAX_DATELEN): Define.
824 (listing_print): Add call to listing_general_info.
825 * listing.h (LISTING_GENERAL): Define.
826 (listing_print): Add new parameter.
827 * as.c (show_usage): Print new switch.
828 (parse_args): Parse new switch.
829 (main): Pass command line on to listing_print.
830 * NEWS: Mention this new feature.
831 * doc/as.texinfo: Document the new sub-option.
833 2008-04-08 Alan Modra <amodra@bigpond.net.au>
835 * dwarf2dbg.c (dwarf2_emit_insn): Simplify test before dwarf2_where
836 call. Delete out of date comment.
837 (dwarf2_consume_line_info): Always clear dwarf2_loc_directive_seen.
838 (dwarf2_emit_label): Don't emit unless there has been a previous
839 .file or we are outputting assembler generated debug.
840 dwarf2_consume_line_info after emitting line info, not before.
841 (out_debug_info): Simplify files_in_use test.
843 2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
845 * config/tc-i386.c (parse_real_register): Return AVX register
846 only if AVX is enabled.
848 2008-04-07 Kaz Kojima <kkojima@rr.iij4u.or.jp>
851 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
852 md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
854 2008-04-04 Adrian Bunk <bunk@stusta.de>
855 Bob Wilson <bob.wilson@acm.org>
857 * config/tc-xtensa.c (xg_apply_fix_value): Check return code from
858 call to decode_reloc.
860 2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
862 * NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
864 * config/tc-i386.c (cpu_arch): Add .pclmul.
865 (md_show_usage): Replace clmul with pclmul.
866 * doc/c-i386.texi: Likewise.
868 2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
870 * NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
872 * doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
873 Document -msse2avx, .avx, .aes, .clmul and .fma.
875 * config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
876 (vex_prefix): Likewise.
878 (CPU_FLAGS_ARCH_MATCH): Likewise.
879 (CPU_FLAGS_64BIT_MATCH): Likewise.
880 (CPU_FLAGS_32BIT_MATCH): Likewise.
881 (CPU_FLAGS_PERFECT_MATCH): Likewise.
883 (vex_imm4): Likewise.
884 (fits_in_imm4): Likewise.
885 (build_vex_prefix): Likewise.
886 (VEX_check_operands): Likewise.
887 (bad_implicit_operand): Likewise.
888 (OPTION_MSSE2AVX): Likewise.
889 (T_YMMWORD): Likewise.
890 (_i386_insn): Add vex.
891 (cpu_arch): Add .avx, .aes, .clmul and .fma.
892 (cpu_flags_match): Changed to take a pointer to const template.
893 Enable encoding SSE instructions with VEX prefix for -msse2avx.
894 (match_mem_size): Also check ymmword.
895 (operand_type_match): Clear ymmword.
896 (md_begin): Allow '_' in mnemonic.
897 (type_names): Add OPERAND_TYPE_VEX_IMM4.
898 (process_immext): Update assert.
899 (md_assemble): Don't call process_immext if sse2avx and immext
900 are true. Call build_vex_prefix if vex is true.
901 (parse_insn): Updated for cpu_flags_match.
902 (swap_operands): Handle 5 operands.
903 (match_template): Handle 5 operands. Updated for cpu_flags_match.
904 Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
905 (process_suffix): Handle YMMWORD_MNEM_SUFFIX.
906 (check_byte_reg): Check regymm.
907 (process_operands): Duplicate the destination register for
909 (build_modrm_byte): Updated for instructions with VEX encoding.
910 (output_insn): Output VEX prefix if needed.
911 (md_longopts): Add msse2avx.
912 (md_parse_option): Handle OPTION_MSSE2AVX.
913 (md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
914 (intel_e09): Support YMMWORD.
915 (intel_e11): Likewise.
916 (intel_get_token): Likewise.
918 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
920 * config/tc-avr.c (mcu_types): Add attiny167.
921 * doc/c-avr.texi: Likewise.
923 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
925 * config/tc-avr.c (mcu_types): Add atmega32u4.
926 * doc/c-avr.texi: Likewise.
928 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
930 * config/tc-avr.c (mcu_types): Add atmega32c1.
931 * doc/c-avr.texi: Likewise.
933 2008-03-28 Paul Brook <paul@codesourcery.com>
935 * config/tc-arm.c (parse_neon_mov): Parse register before immediate
936 to avoid spurious symbols.
938 2008-03-28 Nathan Sidwell <nathan@codesourcery.com>
940 * config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with
943 2008-03-27 Eric B. Weddington <eric.weddington@atmel.com>
945 * config/tc-avr.c (mcu_types): Add atmega32m1.
946 * doc/c-avr.texi: Likewise.
948 2008-03-27 Ineiev <ineiev@yahoo.co.uk>
950 * config/tc-arm.c (do_neon_cvt): Move variable declarations to
952 (do_neon_ext): Fix sign of comparison.
954 2008-03-26 Bernd Schmidt <bernd.schmidt@analog.com>
956 From Jie Zhang <jie.zhang@analog.com>
957 * config/bfin-parse.y (asm_1): Check AREGS in comparison
958 instructions. And call yyerror when comparing PREG with
960 (check_macfunc_option): New.
961 (check_macfuncs): Check option by calling check_macfunc_option.
962 Fix comparison always true warnings. Both scalar instructions
963 of vector instruction must share the same mode option. Only allow
964 option mode at the end of the second instruction of the vector.
965 (asm_1): Check option by calling check_macfunc_option.
967 * config/bfin-parse.y (check_macfunc_option): Allow (IU)
968 option for multiply and multiply-accumulate to data register
970 (check_macfuncs): Don't check if accumulator matches the data register
972 (assign_macfunc): Check if accumulator matches the
973 data register in each rule that moves to the data
976 * config/tc-bfin.c (bfin_start_line_hook): Localize the labels
977 generated for LOOP_BEGIN and LOOP_END instructions.
978 (bfin_gen_loop): Likewise.
980 2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
982 * config/tc-s390.c (md_parse_option): z10 option added.
984 2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
986 * aclocal.m4: Regenerate.
987 * configure: Likewise.
988 * Makefile.in: Likewise.
989 * doc/Makefile.in: Likewise.
991 2008-03-17 Adrian Bunk <bunk@stusta.de>
994 * config/tc-hppa.c (is_same_frag): Delete.
996 2008-03-14 Sterling Augustine <sterling@tensilica.com>
998 * config/tc-xtensa.h (xtensa_relax_statesE): Update comment for
999 RELAX_LOOP_END_ADD_NOP.
1001 2008-03-13 Evandro Menezes <evandro@yahoo.com>
1004 * read.c (s_mexit): Warn if attempting to exit a macro when not
1005 inside a macro definition.
1007 2008-03-13 Alan Modra <amodra@bigpond.net.au>
1009 * Makefile.am: Run "make dep-am".
1010 * Makefile.in: Regenerate.
1011 * configure: Regenerate.
1013 2008-03-09 Paul Brook <paul@codesourcery.com>
1015 * config/tc-arm.c (arm_cpu_option_table): Add cortex-a9.
1016 * doc/c-arm.texi: Add cortex-a9.
1018 2008-03-09 Paul Brook <paul@codesourcery.com>
1020 * config/tc-arm.c (fpu_vfp_ext_d32): New vairable.
1021 (parse_vfp_reg_list, encode_arm_vfp_reg): Use it.
1022 (arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3.
1023 (aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16.
1024 * doc/c-arm.texi: Document new ARM FPU variants.
1026 2008-03-07 Paul Brook <paul@codesourcery.com>
1028 * config/tc-arm.c (md_apply_fix): Use correct offset range.
1030 2008-03-07 Alan Modra <amodra@bigpond.net.au>
1032 * config/tc-ppc.c (ppc_setup_opcodes): Tidy. Add code to test
1033 for strict ordering of powerpc_opcodes, but disable for now.
1035 2008-03-04 Paul Brook <paul@codesourcery.com>
1037 * config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New.
1038 (arm_ext_v7m): Rename...
1039 (arm_ext_m): ... to this. Include v6-M.
1040 (do_t_add_sub): Allow narrow low-reg non flag setting adds.
1041 (do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m.
1042 (md_assemble): Allow wide msr instructions.
1043 (insns): Add classifications for v6-m instructions.
1044 (arm_cpu_option_table): Add cortex-m1.
1045 (arm_arch_option_table): Add armv6-m.
1046 (cpu_arch): Add ARM_ARCH_V6M. Fix numbering of other v6 variants.
1048 2008-03-03 Sterling Augustine <sterling@tensilica.com>
1049 Bob Wilson <bob.wilson@acm.org>
1051 * config/tc-xtensa.c (xtensa_num_pipe_stages): New.
1052 (md_begin): Initialize it.
1053 (resources_conflict): Use it.
1055 2008-03-03 Sterling Augustine <sterling@tensilica.com>
1057 * config/tc-xtensa.h (RELAX_XTENSA_NONE): New.
1059 2008-03-03 Denys Vlasenko <vda.linux@googlemail.com>
1060 H.J. Lu <hongjiu.lu@intel.com>
1063 * read.c (pseudo_set): Don't allow global register symbol.
1065 * symbols.c (S_SET_EXTERNAL): Don't allow register symbol
1068 2008-03-03 H.J. Lu <hongjiu.lu@intel.com>
1071 * write.c (write_object_file): Don't allow symbols which were
1072 equated to register. Stop if there is an error.
1074 2008-03-01 Alan Modra <amodra@bigpond.net.au>
1076 * config/tc-ppc.h (struct _ppc_fix_extra): New.
1078 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Define.
1079 * config/tc-ppc.c (ppu_cpu): Make global.
1080 (ppc_insert_operand): Add ppu_cpu parameter.
1081 (md_assemble): Adjust for above change.
1082 (md_apply_fix): Pass tc_fix_data.ppc_cpu to ppc_insert_operand.
1084 2008-02-22 Nick Clifton <nickc@redhat.com>
1086 * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF
1087 targeted ARM ports, otherwise just skip generating the reloc.
1089 2008-02-18 H.J. Lu <hongjiu.lu@intel.com>
1091 * doc/c-i386.texi: Update -march= and .arch.
1093 2008-02-18 Nick Clifton <nickc@redhat.com>
1095 * config/tc-mn10300.c (has_known_symbol_location): New function.
1096 Do not regard weak symbols as having a known location.
1097 (md_estimate_size_before_relax): Use new function.
1098 (md_pcrel_from): Do not compute a pcrel against a weak symbol.
1100 2008-02-18 Jan Beulich <jbeulich@novell.com>
1102 * config/tc-i386.c (match_template): Disallow 'l' suffix when
1103 currently selected CPU has no 32-bit support.
1104 (parse_real_register): Do not return registers not available on
1105 currently selected CPU.
1107 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
1109 * config/tc-i386.c (process_immext): Fix format.
1111 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
1113 * config/tc-i386.c (inoutportreg): New.
1114 (process_immext): New.
1115 (md_assemble): Use it.
1116 (update_imm): Use imm16 and imm32s.
1117 (i386_att_operand): Use inoutportreg.
1119 2008-02-14 H.J. Lu <hongjiu.lu@intel.com>
1121 * config/tc-i386.c (operand_type_all_zero): New.
1122 (operand_type_set): Likewise.
1123 (operand_type_equal): Likewise.
1124 (cpu_flags_all_zero): Likewise.
1125 (cpu_flags_set): Likewise.
1126 (cpu_flags_equal): Likewise.
1127 (UINTS_ALL_ZERO): Removed.
1128 (UINTS_SET): Likewise.
1129 (UINTS_CLEAR): Likewise.
1130 (UINTS_EQUAL): Likewise.
1131 (cpu_flags_match): Updated.
1132 (smallest_imm_type): Likewise.
1133 (set_cpu_arch): Likewise.
1134 (md_assemble): Likewise.
1135 (optimize_imm): Likewise.
1136 (match_template): Likewise.
1137 (process_suffix): Likewise.
1138 (update_imm): Likewise.
1139 (process_drex): Likewise.
1140 (process_operands): Likewise.
1141 (build_modrm_byte): Likewise.
1142 (i386_immediate): Likewise.
1143 (i386_displacement): Likewise.
1144 (i386_att_operand): Likewise.
1145 (parse_real_register): Likewise.
1146 (md_parse_option): Likewise.
1147 (i386_target_format): Likewise.
1149 2008-02-14 Dimitry Andric <dimitry@andric.com>
1152 * config/tc-arm.c (s_arm_unwind_save): Advance the input line
1153 pointer past the comma after parsing a floating point register
1156 2008-02-14 Hakan Ardo <hakan@debian.org>
1159 * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
1161 (avr_operand): Disallow post-increment addressing in the lpm
1162 instruction for the attiny26.
1164 2008-02-13 Jan Beulich <jbeulich@novell.com>
1166 * config/tc-i386.c (parse_real_register): Don't return 'FLAT'
1167 if not in Intel mode.
1168 (i386_intel_operand): Ignore segment overrides in immediate and
1170 (intel_e11): Range-check i.mem_operands before use as array
1171 index. Filter out FLAT for uses other than as segment override.
1172 (intel_get_token): Remove broken promotion of "FLAT:" to mean
1175 2008-02-13 Jan Beulich <jbeulich@novell.com>
1177 * config/tc-i386.c (intel_e09): Also special-case 'bound'.
1179 2008-02-13 Jan Beulich <jbeulich@novell.com>
1181 * config/tc-i386.c (allow_pseudo_reg): New.
1182 (parse_real_register): Check for NULL just once. Allow all
1183 register table entries when allow_pseudo_reg is non-zero.
1184 Don't allow any registers without type when allow_pseudo_reg
1186 (tc_x86_regname_to_dw2regnum): Replace with ...
1187 (tc_x86_parse_to_dw2regnum): ... this.
1188 (tc_x86_frame_initial_instructions): Adjust for above change.
1189 * config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
1190 (tc_parse_to_dw2regnum): New.
1191 (tc_x86_regname_to_dw2regnum): Replace with ...
1192 (tc_x86_parse_to_dw2regnum): ... this.
1193 * dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
1194 (cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
1197 2008-02-12 Nick Clifton <nickc@redhat.com>
1199 * config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to
1201 (tic4x_insn_add): Likewise.
1202 (md_begin): Drop cast that was discarding a const qualifier.
1203 * config/tc-d30v.c (get_reloc): Add const qualifier to op
1205 (build_insn): Drop cast that was discarding a const qualifier.
1207 2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
1209 * config/tc-i386.c (cpu_arch): Add .xsave.
1210 (md_show_usage): Add .xsave.
1212 * doc/c-i386.texi: Add xsave to -march=.
1214 2008-02-07 Alan Modra <amodra@bigpond.net.au>
1216 * read.c (s_weakref): Don't pass unadorned NULL to concat.
1217 * config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise.
1219 2008-02-05 Sterling Augustine <sterling@tensilica.com>
1221 * config/tc-xtensa.c (relax_frag_immed): Change internal consistency
1222 checks into assertions. When relaxation produces an operation that
1223 does not fit in the current FLIX instruction, make sure that the
1224 operation is relaxed as needed to account for being placed following
1225 the current instruction.
1227 2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
1230 * configure: Regenerated.
1232 2008-02-04 Adam Nemet <anemet@caviumnetworks.com>
1234 * config/tc-mips.c (mips_cpu_info_table): Add Octeon.
1236 2008-01-31 Marc Gauthier <marc@tensilica.com>
1238 * configure.tgt (xtensa*-*-*): Recognize processor variants.
1240 2008-01-25 Kai Tietz <kai.tietz@onevision.com>
1242 * read.c: (emit_expr): Correct for mingw use of printf size
1245 2008-01-24 Bob Wilson <bob.wilson@acm.org>
1247 * doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that
1248 can only be encoded in FLIX instructions but are not specified as such.
1249 (Xtensa Automatic Alignment): Remove obsolete comment about debugging
1252 2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
1254 * NEWS: Mention new command line options for x86 targets.
1256 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
1258 * config/tc-i386.c (md_show_usage): Replace tabs with spaces.
1260 2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
1262 * config/tc-avr.c (mcu_types): Change opcode set for at86rf401.
1264 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
1266 * config/tc-i386.c (md_show_usage): Show more processors for
1269 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
1271 * config/tc-i386.c (i386_target_format): Remove cpummx2.
1273 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
1275 * config/tc-i386.c (XXX_PREFIX): Moved from tc-i386.h.
1276 (XXX_MNEM_SUFFIX): Likewise.
1277 (END_OF_INSN): Likewise.
1278 (templates): Likewise.
1279 (modrm_byte): Likewise.
1280 (rex_byte): Likewise.
1281 (DREX_XXX): Likewise.
1282 (drex_byte): Likewise.
1283 (sib_byte): Likewise.
1284 (processor_type): Likewise.
1285 (arch_entry): Likewise.
1286 (cpu_sub_arch_name): Remove const.
1287 (cpu_arch): Add .vmx and .smx.
1288 (set_cpu_arch): Append cpu_sub_arch_name.
1289 (md_parse_option): Support -march=CPU[,+EXTENSION...].
1290 (md_show_usage): Updated.
1292 * config/tc-i386.h (XXX_PREFIX): Moved to tc-i386.c.
1293 (XXX_MNEM_SUFFIX): Likewise.
1294 (END_OF_INSN): Likewise.
1295 (templates): Likewise.
1296 (modrm_byte): Likewise.
1297 (rex_byte): Likewise.
1298 (DREX_XXX): Likewise.
1299 (drex_byte): Likewise.
1300 (sib_byte): Likewise.
1301 (processor_type): Likewise.
1302 (arch_entry): Likewise.
1304 * doc/as.texinfo: Update i386 -march option.
1306 * doc/c-i386.texi: Update -march= for ISA.
1308 2008-01-18 Bob Wilson <bob.wilson@acm.org>
1310 * config/tc-xtensa.c (xtensa_leb128): New function.
1311 (md_pseudo_table): Use it for sleb128 and uleb128.
1312 (is_leb128_expr): New internal flag.
1313 (xtensa_symbol_new_hook): Check new flag.
1315 2008-01-16 Eric B. Weddington <eric.weddington@atmel.com>
1317 * config/tc-avr.c (mcu_types): Change opcode set for avr3,
1318 at90usb82, at90usb162.
1319 * doc/c-avr.texi: Change architecture grouping for at90usb82,
1321 These changes support the new avr35 architecture group in gcc.
1323 2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
1325 * config/tc-i386.c (md_assemble): Also zap movzx and movsx
1326 suffix for AT&T syntax.
1328 2008-01-14 H.J. Lu <hongjiu.lu@intel.com>
1330 * config/tc-i386.c (match_reg_size): New.
1331 (match_mem_size): Likewise.
1332 (operand_size_match): Likewise.
1333 (operand_type_match): Also clear all size fields.
1334 (match_template): Skip Intel syntax when in AT&T syntax.
1335 Call operand_size_match to check operand size.
1336 (i386_att_operand): Set the mem field to 1 for memory
1338 (i386_intel_operand): Likewise.
1340 2008-01-12 H.J. Lu <hongjiu.lu@intel.com>
1343 * config/tc-i386.c (_i386_insn): Update comment.
1344 (operand_type_match): Also clear unspecified.
1345 (operand_type_register_match): Likewise.
1346 (parse_operands): Initialize unspecified.
1347 (i386_intel_operand): Likewise.
1348 (match_template): Check memory and accumulator operand size.
1349 (i386_att_operand): Clear unspecified on register operand.
1350 (intel_e11): Likewise.
1351 (intel_e09): Set operand size and clean unspecified for
1354 2008-01-11 Andreas Schwab <schwab@suse.de>
1356 * read.c (s_space): Declare `repeat' as offsetT.
1358 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
1360 * config/tc-i386.c (match_template): Check processor support
1363 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
1365 * config/tc-i386.c (match_template): Continue if processor
1368 2008-01-09 Alexandre Oliva <aoliva@redhat.com>
1370 * config/tc-ia64.c (ia64_convert_frag): Zero-initialize room for
1371 unwind personality function address.
1373 2008-01-09 Bob Wilson <bob.wilson@acm.org>
1375 * dwarf2dbg.c (out_sleb128): Delete.
1376 (size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
1377 (out_fixed_inc_line_addr): Delete.
1378 (relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
1379 size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
1380 (dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
1381 (process_entries): Remove calls to out_fixed_inc_line_addr. When
1382 DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
1383 * read.h (emit_expr_fix): New prototype.
1384 * read.c (emit_expr): Move code to emit_expr_fix and use it here.
1385 (emit_expr_fix): New.
1387 2008-01-09 H.J. Lu <hongjiu.lu@intel.com>
1389 * config/tc-i386.c (match_template): Check register size
1390 only when size of operands can be encoded the canonical way.
1392 2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
1394 * config/tc-i386.c (i386_operand): Renamed to ...
1395 (i386_att_operand): This.
1396 (parse_operands): Updated.
1398 2008-01-05 H.J. Lu <hongjiu.lu@intel.com>
1400 * doc/c-i386.texi: Update .att_mnemonic and .intel_mnemonic.
1402 * config/tc-i386.c (set_intel_mnemonic): Set intel_mnemonic
1404 (md_assemble): Remove Intel mode workaround.
1405 (match_template): Check support for old gcc, AT&T mnemonic
1407 (md_parse_option): Don't set intel_mnemonic to 0 for
1410 2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
1412 * config/tc-i386.h: Update copyright to 2008.
1414 2008-01-04 Nick Clifton <nickc@redhat.com>
1416 * config/tc-ppc.c (parse_cpu): Preserve the settings of the
1417 PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags.
1419 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1421 * config/tc-i386.c (md_assemble): Use !intel_mnemonic instead
1424 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1426 * gas/config/tc-i386.c (cpu_arch_flags_not): Removed.
1427 (cpu_flags_not): Likewise.
1428 (cpu_flags_match): Updated to check 64bit and arch.
1429 (set_code_flag): Remove cpu_arch_flags_not.
1430 (set_16bit_gcc_code_flag): Likewise.
1431 (set_cpu_arch): Likewise.
1432 (md_begin): Likewise.
1433 (parse_insn): Call cpu_flags_match to check 64bit and arch.
1434 (match_template): Likewise.
1436 2008-01-03 Jakub Jelinek <jakub@redhat.com>
1438 * config/tc-i386.c (process_drex): Initialize modrm_reg and
1439 modrm_regmem to 0 instead of None.
1441 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1443 * config/tc-i386.c (match_template): Use the xmmword field
1446 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
1448 * config/tc-i386.c (process_suffix): Fix a typo.
1450 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
1453 * config/tc-i386.c (match_template): Handle XMMWORD_MNEM_SUFFIX.
1454 Check memory size in Intel mode.
1455 (process_suffix): Handle XMMWORD_MNEM_SUFFIX.
1456 (intel_e09): Likewise.
1458 * config/tc-i386.h (XMMWORD_MNEM_SUFFIX): New.
1460 2008-01-02 Catherine Moore <clm@codesourcery.com>
1462 * config/tc-mips.c (mips_ip): Check operands on jalr instruction.
1464 For older changes see ChangeLog-2007
1470 version-control: never