gas/ChangeLog

   1 2012-06-30  Johan Olmutz Nielsen  <jnielsen@ddci.com>
   2
   3         * frags.h (frag_offset_fixed_p): Update prototype.
   4         * frags.c (frag_offset_fixed_p): Change type of "offset" to offsetT.
   5         * expr.c (expr, resolve_expression): Likewise for frag_off var.
   6
   7 2012-06-29  Nick Clifton  <nickc@redhat.com>
   8
   9         PR gas/14263
  10         * config/tc-arm.c (parse_operands): Initialise val.
  11
  12 2012-06-28  Nick Clifton  <nickc@redhat.com>
  13
  14         PR gas/14260
  15         * config/tc-arm.c (encode_arm_addr_mode_common): Generate an error
  16         message if literal pool addressing is used.
  17
  18 2012-06-28  Nick Clifton  <nickc@redhat.com>
  19
  20         * dwarf2dbg.c (DWARF2_USE_FIXED_ADVANCE_PC): Enable when using
  21         linker relaxation.
  22         (dwarf2_gen_line_info): Generate real, local, labels for line
  23         numbers.
  24         (dwarf2dbg_convert_frag): Do not finalize the computation of the
  25         frag's symbol value when linker relaxation is enabled.
  26         (ADDR_DELTA_LIMIT): Define.
  27         (size_fixed_inc_line_addr): Use ADDR_DELTA_LIMIT.
  28         (emit_fixed_inc_line_addr): Likewise.
  29         * write.c (fixup_segment): If the subtraction of two symbols
  30         cannot be resolved but is valid, then prevent bogus range warnings
  31         by pre-biasing add_number.
  32         * config/tc-h8300.h (DWARF2_USE_FIXED_ADVANCE_PC): Define to 0.
  33
  34 2012-06-22  Roland McGrath  <mcgrathr@google.com>
  35
  36         * NEWS: Mention 'rep ret' too.
  37
  38         * config/tc-i386.c (parse_insn): Don't complain about REP prefix
  39         when the template has opcode_modifier.repprefixok set.
  40         * NEWS: Mention the change.
  41
  42 2012-06-18  Iain Sandoe  <iain@codesourcery.com>
  43
  44         * configure.in: Check DECLS for free, getenv, malloc, realloc,
  45         * configure: Regenerate.
  46         * config.in: Likewise.
  47
  48 2012-06-13  H.J. Lu  <hongjiu.lu@intel.com>
  49
  50         * config/tc-i386.c (x86_address_bytes): New.
  51         * config/tc-i386.h (TC_ADDRESS_BYTES): Likewise.
  52         (x86_address_bytes): Likewise.
  53
  54 2012-06-13  Zhenqiang Chen  <zhenqiang.chen@linaro.org>
  55
  56         PR gas/12698
  57         * config/tc-arm.c (do_t_mrs): Do not require an m-profile
  58         architecure when assembling for all archiectures.
  59         (do_t_msr): Likewise.
  60
  61 2012-06-11  Georg-Johann Lay  <avr@gjlay.de>
  62
  63         PR 13503
  64         * config/tc-avr.c (exp_mod): Fix typo introduced in 1.82
  65         from 2012-05-16.
  66
  67 2012-06-09  H.J. Lu  <hongjiu.lu@intel.com>
  68
  69         * input-scrub.c (input_scrub_include_sb): Use sb_build to
  70         allocate sufficient space for from_sb.  Use sb_terminate to
  71         terminate string.
  72         * read.c (read_a_source_file): Use sb_build to allocate
  73         sufficient space and replace sb_add_string with sb_add_buffer.
  74         (s_macro): Likewise.
  75         (input_scrub_insert_line): Likewise.
  76         (s_irp): Use sb_build to allocate sufficient space.
  77         (do_repeat): Use sb_build to allocate sufficient space
  78         for many.
  79         * sb.c (sb_build): Remove static.
  80         * sb.h (sb_build): New prototype.
  81
  82 2012-06-09  Alan Modra  <amodra@gmail.com>
  83
  84         * sb.c: Include limits.h.
  85         (dsize): Delete.
  86         (MALLOC_OVERHEAD, INIT_ALLOC): Define.
  87         (sb_new): Use INIT_ALLOC.
  88         (sb_check): Modify allocation strategy using MALLOC_OVERHEAD.
  89         (sb_terminate): Don't use sb_add_char.
  90
  91 2012-06-07  Alan Modra  <amodra@gmail.com>
  92
  93         PR gas/14201
  94         * sb.h (sb_max_power_two): Delete.
  95         (struct sb): Delete "item" and "pot".  Make "len" a size_t.  Add "max".
  96         (sb_element): Delete.
  97         (sb_add_char, sb_add_buffer, sb_skip_comma, sb_skip_write): Update
  98         prototypes.
  99         * sb.c (string_count, free_list): Delete.
 100         (sb_build, sb_kill, sb_check): Rewrite.
 101         (scrub_from_sb, sb_add_char, sb_add_string, sb_add_buffer,
 102         sb_skip_white, sb_skip_comma): Replace assorted int params,
 103         vars and return types with size_t.
 104         * input-scrub.c: Likewise.
 105         * macro.c: Likewise.
 106         * macro.h: Likewise.
 107         * as.c: Likewise.
 108         * as.h: Likewise.
 109         * input-file.h: Likewise.
 110         * input-file.c: Likewise.
 111         * read.c: Likewise.
 112         * app.c: ..or ptrdiff_t.
 113         * input-file.c (input_file_get): Use ferror.
 114         (input_file_give_next_buffer): Use input_file_get.
 115
 116 2012-05-29  Roland McGrath  <mcgrathr@google.com>
 117
 118         * read.c [HANDLE_BUNDLE] (bundle_lock_depth): New variable.
 119         (read_a_source_file) [HANDLE_BUNDLE]: Reset it.
 120         [HANDLE_BUNDLE] (s_bundle_lock, s_bundle_unlock): Allow nested
 121         pairs.
 122
 123 2012-05-28  Nick Clifton  <nickc@redhat.com>
 124
 125         * read.c (read_symbol_name): New function.  Reads a symbol names.
 126         Allows escape codes in names.
 127         (s_comm_internal): Use read_symbol_name.
 128         (s_globl, s_lsym, s_set, s_weakref): Likewise.
 129         * doc/as.texinfo: Document support for multibyte characters in
 130         symbol names.
 131
 132 2012-05-21  Mike Frysinger  <vapier@gentoo.org>
 133
 134         * config/tc-mips.c (mips_after_parse_args): Assert that arch_info
 135         is non-NULL.
 136
 137 2012-05-19  Alan Modra  <amodra@gmail.com>
 138
 139         * config/obj-elf.c (obj_elf_section): Cater for TC_KEEP_OPERAND_SPACES
 140         targets when checking for "comdat".
 141
 142 2012-05-19  Alan Modra  <amodra@gmail.com>
 143
 144         * config/tc-dlx.c (s_proc): Don't use asprintf.
 145
 146 2012-05-18  Alan Modra  <amodra@gmail.com>
 147
 148         * config/tc-dlx.c (s_proc): Avoid warning about ignoring asprintf
 149         return value.
 150
 151 2012-05-18  James Lemke  <jwlemke@codesourcery.com>
 152             Alan Modra  <amodra@gmail.com>
 153
 154         * config/tc-ppc.c: Don't capitalise error and warning messages.
 155         (md_parse_option): Add checks for -a32 -mvle.
 156
 157 2012-05-18  Alan Modra  <amodra@gmail.com>
 158
 159         * config/obj-evax.c: Include as.h first.
 160
 161 2012-05-18  Andreas Schwab  <schwab@linux-m68k.org>
 162
 163         * aclocal.m4: Regenerate.
 164         * configure: Regenerate.
 165         * Makefile.in: Regenerate.
 166
 167 2012-05-17  Daniel Richard G.  <skunk@iskunk.org>
 168             Nick Clifton  <nickc@redhat.com>
 169
 170         PR 14072
 171         * configure.in: Add check that sysdep.h has been included before
 172         any system header files.
 173         * configure: Regenerate.
 174         * config.in: Regenerate.
 175         * aclocal.m4: Regenerate.
 176         * Makefile.am: Use wrappers around C files generated by flex.
 177         * Makefile.in: Regenerate.
 178         * doc/Makefile.in: Regenerate.
 179         * itbl-lex-wrapper.c: New file.
 180         * config/bfin-lex-wrapper.c: New file.
 181         * cgen.c: Include as.h before setjmp.h.
 182         * config/tc-dlx.c: Include as.h before any other header.
 183         * config/tc-h8300.c: Likewise.
 184         * config/tc-lm32.c: Likewise.
 185         * config/tc-mep.c: Likewise.
 186         * config/tc-microblaze.c: Likewise.
 187         * config/tc-mmix.c: Likewise.
 188         * config/tc-msp430.c: Likewise.
 189         * config/tc-or32.c: Likewise.
 190         * config/tc-tic4x.c: Likewise.
 191         * config/tc-tic54x.c: Likewise.
 192         * config/tc-xtensa.c: Likewise.
 193
 194 2012-05-16  Sergio Durigan Junior  <sergiodj@redhat.com>
 195
 196         * config/tc-alpha.c (maybe_set_gp): Pass proper `bfd'
 197         as the first argument for `bfd_get_section_vma'.
 198
 199 2012-05-16  Alberto Garcia  <agarcia@igalia.com>
 200
 201         PR gas/14082
 202         * app.c (do_scrub_chars): Prevent possible out of bounds access to
 203         lex[] array.
 204
 205 2012-05-16  Georg-Johann Lay  <avr@gjlay.de>
 206
 207         PR target/13503
 208         * config/tc-avr.c (avr_cons_fix_new): Rename R_AVR_8_HHI8 to
 209         R_AVR_8_HLO8.
 210         (exp_mod_data) Ditto. And replace "hhi8" with "hlo8".
 211         (md_apply_fix): Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.
 212
 213 2012-05-16  Nathan Sidwell  <nathan@codesourcery.com>
 214             Kwok Cheung Yeung  <kcy@codesourcery.com>
 215
 216         * config/tc-m68k.c (m68k_cpus): Add 51ag, 51je, 51jf, 51jg, 51mm,
 217         51qm variants.
 218
 219 2012-05-15  James Murray <jsm@jsm-net.demon.co.uk>
 220
 221         * config/tc-m68hc11.c: Add S12X and XGATE co-processor support.
 222         Add option to offset S12 addresses into XGATE memory space.
 223         Tweak target flags to match other tools. (i.e. -m m68hc11).
 224         * doc/as.texinfo: Mention new options.
 225         * doc/c-m68hc11.texi: Document new options.
 226         * NEWS: Mention new support.
 227
 228 2012-05-14  DJ Delorie  <dj@redhat.com>
 229
 230         * config/rx-parse.y (rx_range): declare.
 231         (O1,O2,O3,O4): Add calls to rx_range.
 232         (UO1,UO2,UO3): Likewise.
 233         (IMM2,IMMB): Likewise.
 234         (rx_range): New.
 235
 236         * config/tc-rx.c (rx_fetchalign): Declare.
 237         (md_pseudo_table): Add .fetchalign.
 238         (RX_NBASE_FETCHALIGN): New.
 239         (fetchalign_bytes): New.
 240         (rx_fetchalign): New.
 241         (rx_frag_init): If a "magic" value is found, also init the
 242         machine-specific data.
 243         (md_assemble): Note following opcode size if called for.
 244         (rx_next_opcode): New.
 245         (rx_relax_frag): Support .fetchalign.
 246         (md_convert_frag): Likewise.
 247         * doc/c-rx.texi (RX-Directives): Add .fetchalign.
 248
 249 2012-05-14  James Lemke  <jwlemke@codesourcery.com>
 250
 251         * config/tc-ppc.c (insn_validate): New func of existing code to call..
 252         (ppc_setup_opcodes): ..from 2 places here.
 253         Revise for second (VLE) opcode table.
 254         Add #ifdef'd code to print opcode tables.
 255
 256 2012-05-14  James Lemke  <jwlemke@codesourcery.com>
 257
 258         * config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
 259         for the VLE conditional branches.
 260
 261 2012-05-14  Catherine Moore  <clm@codesourcery.com>
 262             Maciej W. Rozycki  <macro@codesourcery.com>
 263             Rhonda Wittels  <rhonda@codesourcery.com>
 264
 265         * config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
 266         (PPC_VLE_SPLIT16D): New macro.
 267         (PPC_VLE_LO16A): New macro.
 268         (PPC_VLE_LO16D): New macro.
 269         (PPC_VLE_HI16A): New macro.
 270         (PPC_VLE_HI16D): New macro.
 271         (PPC_VLE_HA16A): New macro.
 272         (PPC_VLE_HA16D): New macro.
 273         (PPC_APUINFO_VLE): New definition.
 274         (md_chars_to_number): New function.
 275         (md_parse_option): Check for combinations of little
 276         endian and -mvle.
 277         (md_show_usage): Document -mvle.
 278         (ppc_arch): Recognize VLE.
 279         (ppc_mach): Recognize bfd_mach_ppc_vle.
 280         (ppc_setup_opcodes): Print the opcode table if
 281         * config/tc-ppc.h (ppc_frag_check): Declare.
 282         * doc/c-ppc.texi: Document -mvle.
 283         * NEWS:  Mention PowerPC VLE port.
 284
 285 2012-05-14  Catherine Moore  <clm@codesourcery.com>
 286
 287         * config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
 288         (DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
 289         * config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
 290         * dwarf2dbg.c (scale_addr_delta): Handle values of 1
 291         for DWARF2_LINE_MIN_INSN_LENGTH.
 292
 293 2012-05-12  H.J. Lu  <hongjiu.lu@intel.com>
 294
 295         * config/tc-i386.c (tc_gen_reloc): Remove x32 addend overflow
 296         for BFD_RELOC_64.
 297
 298 2012-05-11  Daniel Richard G.  <skunk@iskunk.org>
 299
 300         PR binutils/14028
 301         * configure.in: Invoke ACX_HEADER_STRING.
 302         * configure: Regenerate.
 303         * config.in: Regenerate.
 304         * as.h: If STRINGS_WITH_STRING is defined then include both
 305         string.h and strings.h.
 306
 307 2012-05-11  Georg-Johann Lay  <avr@gjlay.de
 308
 309         PR target/13503
 310         * config/tc-avr.c (exp_mod_pm): Remove variable.
 311         (exp_mod_data_t): New typedef.
 312         (pexp_mod_data, exp_mod_data): New variables.
 313         (avr_parse_cons_expression): Scan through exp_mod_data[] to find
 314         data expression modifiers "pm", "gs", "lo8", hi8", "hhi8", "hh8"
 315         and set pexp_mod_data accordingly to be used in avr_cons_fix_new.
 316         (avr_cons_fix_new): Handle new data expression modifiers shipped
 317         in pexp_mod_data.
 318         (md_apply_fix): Handle BFD_RELOC_AVR_8_LO, BFD_RELOC_AVR_8_HI,
 319         BFD_RELOC_AVR_8_HHI.
 320
 321 2012-05-10  H.J. Lu  <hongjiu.lu@intel.com>
 322
 323         * config/tc-i386.c (tc_gen_reloc): Use bfd_signed_vma in x32
 324         addend overflow check.
 325
 326 2012-05-10  H.J. Lu  <hongjiu.lu@intel.com>
 327
 328         * config/tc-i386.c (tc_gen_reloc): Display signed hex number in
 329         x32 addend overflow check.
 330
 331 2012-05-09  H.J. Lu  <hongjiu.lu@intel.com>
 332
 333         * config/tc-i386.c (tc_gen_reloc): Use fits_in_signed_long.
 334
 335 2012-05-09  H.J. Lu  <hongjiu.lu@intel.com>
 336
 337         * config/tc-i386.c (tc_gen_reloc): Check x32 addend overflow
 338         for BFD_RELOC_64.
 339
 340 2012-05-08  Alan Modra  <amodra@gmail.com>
 341
 342         * Makefile.am (check_DEJAGNU): Export LC_ALL=C in place of other
 343         LC and LANG environment vars.
 344         * Makefile.in: Regenerate.
 345
 346 2012-05-07  Alan Modra  <amodra@gmail.com>
 347
 348         * Makefile.am (check-DEJAGNU): Clear LC_COLLATE, LC_ALL and LANG.
 349         * Makefile.in: Regenerate.
 350
 351 2012-05-06  Arnold Metselaar <arnold_m@operamail.com>
 352
 353         * config/tc-z80.h(md_register_arithmetic): Define as 0.
 354         * config/tc-z80.c(md_begin): Store register names in symbol table,
 355         preventing usage as ordinary symbol.
 356         * config/tc-z80.c(contains_register): New function.
 357         * config/tc-z80.c(parse_exp2): Removed.
 358         * config/tc-z80.c(parse_exp_not_indexed): New function.
 359         * config/tc-z80.c(parse_exp): Add code to recogize indexed
 360         addressing after parsing.
 361         * config/tc-z80.c(emit_byte, emit_word): Use contains_register.
 362         * config/tc-z80.c(emit_jp): Use parse_exp_not_indexed, simplify
 363         condition for jump to register.
 364         * config/tc-z80.c(emit_call, emit_jr, emit_ex, emit_rst): Use
 365         parse_exp_not_indexed.
 366
 367 2012-05-05  Alan Modra  <amodra@gmail.com>
 368
 369         * ecoff.c: Replace all uses of bfd_abs_section, bfd_com_section,
 370         bfd_und_section and bfd_ind_section with their _ptr variants, or
 371         use corresponding bfd_is_* macros.
 372         * symbols.c: Likewise.
 373         * config/obj-aout.c: Likewise.
 374         * config/obj-coff-seh.h: Likewise.
 375         * config/tc-hppa.c: Likewise.
 376         * config/tc-hppa.h: Likewise.
 377         * config/tc-ia64.c: Likewise.
 378         * config/tc-m32r.c: Likewise.
 379         * config/tc-microblaze.c: Likewise.
 380         * config/tc-mips.c: Likewise.
 381         * config/tc-score.c: Likewise.
 382         * config/tc-score7.c: Likewise.
 383         * config/tc-tic6x.c: Likewise.
 384
 385 2012-05-04  H.J. Lu  <hongjiu.lu@intel.com>
 386
 387         * configure.tgt: Support x86_64-*-linux-gnux32.
 388
 389 2012-05-04  H.J. Lu  <hongjiu.lu@intel.com>
 390
 391         * config/tc-i386.c (match_template): Add `instruction' to
 392         unsupported error message.
 393
 394 2012-05-04  H.J. Lu  <hongjiu.lu@intel.com>
 395
 396         * config/tc-i386.c (output_insn): Reformat.
 397
 398 2012-05-04  H.J. Lu  <hongjiu.lu@intel.com>
 399
 400         * config/tc-i386.c (output_insn): Remove the extra VEX check.
 401
 402 2012-05-04  H.J. Lu  <hongjiu.lu@intel.com>
 403
 404         * config/tc-i386.c (match_template): Improve unsupported error
 405         message.
 406
 407 2012-05-03  Sean Keys  <skeys@ipdatasys.com>
 408
 409         * configure, Makefile.in: Regenerate.
 410         * Makefile.am (CPU_TYPES, TARGET_CPU_CFILES, TARGET_CPU_HFILES):
 411         * configure.tgt: Added cpu type.
 412         Added files for XGATE assembler.
 413         * config/tc-xgate.c: Assembler for XGATE.
 414         * config/tc-xgate.h: Header definition for assembler
 415         Added files for XGATE testsuite.
 416         * doc/Makefile.am (CPU_DOCS): Added XGATE file.
 417         * doc/c-xgate.texi: Document XGATE and XGATE port.
 418         * doc/as.texinfo: Ditto.
 419         * doc/all.texi: Ditto
 420         * NEWS: Mention the new support.
 421
 422 2012-04-30  DJ Delorie  <dj@redhat.com>
 423
 424         * config/rx-parse.y (rx_intop): Add parameter for operation size.
 425         Check for large positive constants really being small negative
 426         ones.
 427         (BRA, BSR): Update calls to rx_intop.
 428         (immediate): Likewise.
 429
 430 2012-04-26  Mark Wielaard  <mjw@redhat.com>
 431
 432         * dwarf2dbg.c (DWARF2_ARANGES_VERSION): New define to 2.
 433         (DWARF2_LINE_VERSION): Likewise.
 434         (out_debug_line): Use DWARF2_LINE_VERSION not DWARF2_VERSION.
 435         (out_debug_aranges): Use DWARF2_ARANGES_VERSION not DWARF2_VERSION.
 436         (out_debug_abbrev): Use DW_FORM_data for DW_AT_high_pc when
 437         DWARF2_VERSION >= 4.
 438         (out_debug_info): Use difference between start and end as data
 439         value for DW_AT_high_pc when DWARF2_VERSION >= 4.
 440         * config/tc-ia64.h (DWARF2_LINE_VERSION): Override it.
 441
 442 2012-04-27  David S. Miller  <davem@davemloft.net>
 443
 444         * doc/c-sparc.text: Document %l34 and %h34.
 445
 446         * config/tc-sparc.c (v9a_asr_table): Add 'cfr'.
 447
 448         * config/tc-sparc.c (sparc_arch_table): Add HWCAP_PAUSE to sparc4,
 449         v8pluse, v8plusv, v9e, and v9v.
 450         (v9a_asr_table): Add 'pause'.
 451
 452         * config/tc-sparc.c (sparc_arch_table): Add HWCAP_CBCOND to
 453         sparc4, v8pluse, v8plusv, v9e, and v9v.
 454         (sparc_ip): Handle R_SPARC_5 of immediate constants inline in
 455         order to accomodate cbcond which otherwise would require two
 456         relocations to be handled in a single instruction..
 457
 458         * config/tc-sparc.c (sparc_ip): Likewise.  Accept instruction
 459         names containing "_".
 460         (sparc_arch_table): Add sparc4, v8pluse, and v9e.  Add crypto
 461         hwcap masks to v8plusv and v9v.
 462
 463         * config/tc-sparc.c (sparc_arch_table): Rework to use HWCAP_*
 464         masks.
 465         (sparc_md_end): No longer need to translate hwcap_seen values into
 466         ELF hwcap bits, they now match exactly.
 467         (get_hwcap_name): Use HWCAP_* and handle new values.
 468         (sparc_ip): Fetch hwcaps from insn->hwcaps instead of insn->flags.
 469
 470 2012-04-20  Tristan Gingold  <gingold@adacore.com>
 471
 472         * config/tc-ia64.c (obj_elf_vms_common): New function.
 473         (md_pseudo_table): Add .vms_common pseudo.
 474         * config/obj-elf.h (obj_elf_section_name): Add a prototype.
 475         * config/obj-elf.c (obj_elf_section_name): Make it public.
 476
 477 2012-04-17  Richard Sandiford  <r.sandiford@uk.ibm.com>
 478
 479         * config/tc-avr.c (md_apply_fix): Fix handling of BFD_RELOC32.
 480
 481 2012-04-12  David S. Miller  <davem@davemloft.net>
 482
 483         * config/tc-sparc.c (sparc_ip): Handle '=', "%h34", "%l34", and
 484         BFD_RELOC_SPARC_H34.
 485         (md_apply_fix): Handle BFD_RELOC_SPARC_WDISP10 and BFD_RELOC_SPARC_H34.
 486         (tc_gen_reloc): Likewise.
 487
 488 2012-04-12  Roland McGrath  <mcgrathr@google.com>
 489
 490         * configure.tgt (arm-*-nacl*): Match it.
 491         * config/te-nacl.h (FPU_DEFAULT, EABI_DEFAULT): Define.
 492         (LOCAL_LABELS_DOLLAR): Define.
 493         * config/tc-arm.c (elf32_arm_target_format) [TE_NACL]:
 494         Use nacl format variants.
 495
 496 2012-04-12  Jie Zhang  <jie@codesourcery.com>
 497             Meador Inge  <meadori@codesourcery.com>
 498
 499         * config/tc-arm.c (only_one_reg_in_list): New function.
 500         (encode_ldmstm): Ditto.
 501         (do_ldmstm): Use a different encoding when pushing or poping
 502         a single register.
 503         (A_COND_MASK): New macro.
 504         (A_PUSH_POP_OP_MASK): Ditto.
 505         (A1_OPCODE_PUSH): Ditto.
 506         (A2_OPCODE_PUSH): Ditto.
 507         (A2_OPCODE_POP): Ditto.
 508
 509 2012-04-06  Maciej W. Rozycki  <macro@linux-mips.org>
 510
 511         * doc/c-mips.texi (MIPS Opts): Correct -no-mfix-24k to
 512         -mno-fix-24k.
 513
 514 2012-04-06  Roland McGrath  <mcgrathr@google.com>
 515
 516         * configure.in (AC_CHECK_HEADERS): Add locale.h.
 517         * config.in: Regenerate.
 518         * configure: Regenerate.
 519
 520 2012-04-05  Nick Clifton  <nickc@redhat.com>
 521
 522         * configure.in (AC_CHECK_FUNCS): Add setlocale.
 523         (AM_LC_MESSAGES): Add.
 524         * aclocal.m4: Regenerate.
 525         * config.in: Regenerate.
 526         * configure: Regenerate.
 527
 528 2012-04-03  DJ Delorie  <dj@redhat.com>
 529
 530         * config/rx-parse.y: Make the .L optional for ADC and SBB.
 531
 532 2012-04-02  DJ Delorie  <dj@redhat.com>
 533
 534         * config/rx-parse.y: IMM->IMM_, take an extra parameter for the
 535         transfer size.
 536         (IMM): New, call IMM_ with the default 32.
 537         (IMMW,IMMB): Likewise, for 16 and 8.
 538         (NIMM, MBIMM): Add size parameter.
 539         (immediate): Likewise.  Allow 32768..65535 for 16-bit transfers.
 540         (MOV.W): Use IMMW instead of IMM.
 541
 542         * config/rx-parse.y (ADC,SBB): ADC and SBB only allow .L.
 543         (op_dp20_rm_l): New.
 544         (op_dp20_rim_l): New.
 545
 546         * config/rx-parse.y (op_dp20_rms): Rename to op_dp20_rr, don't allow mem.
 547         (ABS, NEG, NOT): These only take REG or REG,REG (rr, not rms).
 548
 549 2012-03-29  Terry Guo  <terry.guo@arm.com>
 550
 551         * config/tc-arm.c (arm_cpus): Add cortex-m0plus.
 552         * doc/c-arm.texi (ARM Options): Document -mcpu=cortex-m0plus.
 553
 554 2012-03-23  Maxim Kuvyrkov  <maxim@codesourcery.com>
 555
 556         * config/tc-mips.c (mips_cpu_info_table): Add entry for Broadcom XLP.
 557         * doc/c-mips.texi: Mention XLP.
 558
 559 2012-03-21  Thomas Schwinge  <thomas@codesourcery.com>
 560
 561         [SH] Support the .uaquad and .8byte directives also for non-sh64
 562         configurations.
 563
 564         * config/tc-sh.c (sh_cons_fix_new, md_apply_fix) [!HAVE_SH64]: Handle
 565         BFD_RELOC_64.
 566         * doc/c-sh64.texi (SH64 Machine Directives): Move .uaquad
 567         description...
 568         * doc/c-sh.texi (SH Machine Directives): ... here.
 569
 570 2012-03-20  Nick Clifton  <nickc@redhat.com>
 571
 572         * config/tc-arm.c (do_vmrs): Accept priviledged mode VFP system
 573         registers.
 574         (do_vmsr): Likewise.
 575         (arm_opcode_insns): Do not default to using the FPSCR register in
 576         the VMRS and VMSR registers.
 577
 578 2012-03-16  Roland McGrath  <mcgrathr@google.com>
 579
 580         * config/tc-i386.h [TE_NACL] (ELF_TARGET_FORMAT32, ELF_TARGET_FORMAT64):
 581         Define for this case.
 582         * configure.tgt (i386-*-nacl*): If ${cpu} is x86_64*, default to x32.
 583
 584 2012-03-16  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
 585
 586         * config/tc-arm.c (aeabi_set_public_attributes): Correct
 587         handling of Tag_DIV_use.
 588
 589 2012-03-15  Thomas Schwinge  <thomas@codesourcery.com>
 590
 591         * doc/as.texinfo (Bundle directives): Fix typo.
 592
 593 2012-03-14  Ryan Mansfield  <rmansfield@qnx.com>
 594
 595         * doc/as.texinfo (Bundle directives): Replace @defn with @dfn.
 596
 597 2012-03-13  Roland McGrath  <mcgrathr@google.com>
 598
 599         * config/tc-arm.c (arm_frag_max_var): New function.
 600         * config/tc-arm.h: Declare it.
 601         (md_frag_max_var): New macro.
 602
 603         * config/tc-i386.c (i386_frag_max_var): New function.
 604         * config/tc-i386.h: Declare it.
 605         (md_frag_max_var): New macro.
 606
 607         * doc/as.texinfo (Bundle directives): New node.
 608         (Pseudo Ops): Add it to the menu.
 609         * NEWS: Mention new feature.
 610         * read.c [md_frag_max_var] (HANDLE_BUNDLE): New macro.
 611         [HANDLE_BUNDLE] (bundle_align_p2): New variable.
 612         [HANDLE_BUNDLE] (bundle_lock_frchain, bundle_lock_frag): New variables.
 613         [HANDLE_BUNDLE] (start_bundle, pending_bundle_size, finish_bundle):
 614         New functions.
 615         (assemble_one): New function if [HANDLE_BUNDLE], #define directly
 616         to md_assembly if not.
 617         (read_a_source_file): Call assemble_one in place of md_assemble.
 618         (read_a_source_file) [HANDLE_BUNDLE]: Check for unterminated
 619         .bundle_lock at end of processing.
 620         [HANDLE_BUNDLE] (s_bundle_align_mode, s_bundle_lock, s_bundle_unlock):
 621         New functions.
 622         [HANDLE_BUNDLE] (potable): Add their entries.
 623         * read.h: Declare new functions.
 624
 625 2012-03-10  Edmar Wienskoski  <edmar@freescale.com>
 626
 627         * config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
 628         (ppc_handle_align): Add termination nop opcode for e500mc family.
 629         * doc/as.texinfo: Document options -me5500 and -me6500.
 630         * doc/c-ppc.texi: Likewise.
 631
 632 2012-03-07  Nick Clifton  <nickc@redhat.com>
 633
 634         * config/tc-mn10300.c (other_registers): Add SSP and USP.
 635         (md_assemble): Add support for TLS relocs.
 636         (mn10300_parse_name): Likewise.
 637
 638 2012-02-27  Alan Modra  <amodra@gmail.com>
 639
 640         * config/tc-crx.c (check_range): Correct uint32_t misconceptions.
 641
 642 2012-02-27  Alan Modra  <amodra@gmail.com>
 643
 644         * config/tc-tic4x.c (tic4x_do_align): Remove ATTRIBUTE_UNUSED on
 645         params.  Properly generate NOP pattern.  Comment reason for
 646         subseg_text_p failure.
 647
 648 2012-02-27  Alan Modra  <amodra@gmail.com>
 649
 650         * config/tc-h8300.c (constant_fits_width_p): Trim constant to 32 bits
 651         and sign extend before range tests.
 652         (constant_fits_size_p): Similarly.
 653         (get_specific): Trim X_add_number to 32 bits.
 654         (fix_operand_size): Likewise, and use unsigned test for signed
 655         ranges.
 656
 657 2012-02-27  Alan Modra  <amodra@gmail.com>
 658
 659         * config/tc-crx.c: Include bfd_stdint.h.
 660         (getconstant): Remove irrelevant comment.  Don't fail due to
 661         sign-extension of int mask.
 662         (check_range): Rewrite using unsigned arithmetic throughout.
 663
 664 2012-02-25  Walter Lee  <walt@tilera.com>
 665
 666         * tc-tilepro.c (emit_tilepro_instruction): Check if symbol is
 667         non-local before checking sy_value.
 668         * tc-tilegx.c (emit_tilegx_instruction): Ditto.
 669
 670 2012-02-25  Walter Lee  <walt@tilera.com>
 671
 672         * tc-tilepro.c (O_tls_le): Define operator.
 673         (O_tls_le_lo16): Ditto.
 674         (O_tls_le_hi16): Ditto.
 675         (O_tls_le_ha16): Ditto.
 676         (O_tls_gd_call): Ditto.
 677         (O_tls_gd_add): Ditto.
 678         (O_tls_ie_load): Ditto.
 679         (md_begin): Delete old operators; handle new operators.
 680         (emit_tilepro_instruction): Ditto.
 681         (md_apply_fix): Ditto.
 682         * tc-tilegx.c (O_hw1_got): Delete operator.
 683         (O_hw2_got): Ditto.
 684         (O_hw3_got): Ditto.
 685         (O_hw2_last_got): Ditto.
 686         (O_hw1_tls_gd): Ditto.
 687         (O_hw2_tls_gd): Ditto.
 688         (O_hw3_tls_gd): Ditto.
 689         (O_hw2_last_tls_gd): Ditto.
 690         (O_hw1_tls_ie): Ditto.
 691         (O_hw2_tls_ie): Ditto.
 692         (O_hw3_tls_ie): Ditto.
 693         (O_hw2_last_tls_ie): Ditto.
 694         (O_hw0_tls_le): Define operator.
 695         (O_hw0_last_tls_le): Ditto.
 696         (O_hw1_last_tls_le): Ditto.
 697         (O_tls_gd_call): Ditto.
 698         (O_tls_gd_add): Ditto.
 699         (O_tls_ie_load): Ditto.
 700         (O_tls_add): Ditto.
 701         (md_begin): Delete old operators; handle new operators.
 702         (emit_tilegx_instruction): Ditto.
 703         (md_apply_fix): Ditto.
 704         * doc/c-tilegx.texi: Delete old operators; document new operators.
 705         * doc/c-tilepro.texi: Ditto.
 706
 707 2012-02-25  Walter Lee  <walt@tilera.com>
 708
 709         * tc-tilepro.c (apply_special_operator): delete cases for
 710         got and tls operators.
 711         (md_apply_fix): Ditto.
 712         * tc-tilegx.c (md_begin): Set architecture and machine.
 713         (tilegx_target_format): Handle big endian.
 714         (OPTION_EB): Define.
 715         (OPTION_EL): Define.
 716         (md_longopts): Add entries for "EB" and "EL".
 717         (md_parse_option): Handle OPTION_EB and OPTION_EL.
 718         (md_show_usage): Add -EB and -EL.
 719         (md_number_to_chars): New.
 720         (apply_special_operator): delete cases for got and tls
 721         operators.
 722         (md_apply_fix): Ditto.
 723         * tc-tilegx.h (TARGET_BYTES_BIG_ENDIAN): Guard definition with
 724         ifndef.
 725         (md_number_to_chars): Delete.
 726         * configure.tgt (tilegx*be): Handle.
 727         * doc/as.texinfo [TILE-Gx]: Document -EB and -EL.
 728         * doc/c-tilegx.texi: Ditto.
 729
 730 2012-02-21  H.J. Lu  <hongjiu.lu@intel.com>
 731
 732         * config/tc-i386.c (check_hle): Use HLEPrefixNone, HLEPrefixLock,
 733         HLEPrefixAny and HLEPrefixRelease.
 734
 735 2012-02-21  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
 736
 737         * gas/config/tc-arm.h (DOUBLESLASH_LINE_COMMENTS): Define.
 738
 739 2012-02-21  Iain Sandoe  <idsandoe@googlemail.com>
 740
 741         * write.c (write_object_file): Add md_pre_output_hook.
 742         * config/obj-macho.c (obj_mach_o_check_before_writing): New.
 743         (obj_mach_o_pre_output_hook): New.
 744         * config/obj-macho.h (md_pre_output_hook): Define.
 745         (obj_mach_o_pre_output_hook): Declare.
 746
 747 2012-02-21  Tristan Gingold  <gingold@adacore.com>
 748
 749         * config/tc-i386.h (OBJ_MACH_O): New section.
 750         (TC_FORCE_RELOCATION): Use obj_mach_o_force_reloc.
 751         (TC_FORCE_RELOCATION_SUB_SAME): New
 752         (TC_FORCE_RELOCATION_SUB_LOCAL): New.
 753         (TC_VALIDATE_FIX_SUB): New.
 754         * frags.h (struct frag): OBJ_FRAG_TYPE, new field.
 755         * symbols.c (colon): obj_frob_colon: New hook.
 756         * write.c (write_object_file): md_pre_relax_hook, new
 757         hook.
 758         * config/obj-macho.c (obj_mach_o_frob_colon): New.
 759         (obj_mach_o_frob_label): Record sub-section labels.
 760         (obj_mach_o_frob_symbol): Rename from obj_macho_frob_symbol.
 761         (obj_mach_o_set_subsections): New.
 762         (obj_mach_o_pre_relax_hook): New.
 763         (obj_mach_o_in_different_subsection): New.
 764         (obj_mach_o_force_reloc_sub_same): New.
 765         (obj_mach_o_force_reloc_sub_local): New.
 766         (obj_mach_o_force_reloc): New.
 767         * config/obj-macho.h (OBJ_SYMFIELD_TYPE): New.
 768         (obj_frob_colon): New Define.
 769         (obj_mach_o_frob_label): Renamed.
 770         (obj_mach_o_frob_symbol): Renamed.
 771         (OBJ_FRAG_TYPE): New.
 772         (obj_mach_o_in_different_subsection, obj_mach_o_force_reloc,
 773          obj_mach_o_force_reloc_sub_same,
 774          obj_mach_o_force_reloc_sub_local): New declarations.
 775
 776 2012-02-20  Iain Sandoe  <idsandoe@googlemail.com>
 777
 778         * config/obj-macho.c (obj_mach_o_is_frame_section): New.
 779         (obj_mach_o_allow_local_subtract): New.
 780         * config/obj-macho.h (md_allow_local_subtract): Define.
 781         (obj_mach_o_allow_local_subtract): Declare.
 782
 783 2012-02-20  Iain Sandoe  <idsandoe@googlemail.com>
 784
 785         * config/obj-macho.c (obj_mach_o_make_or_get_sect): In the absence of
 786         canonical information, try to determine CODE and DEBUG section flags
 787         from the mach-o section data.
 788
 789 2012-02-20  Nick Clifton  <nickc@redhat.com>
 790
 791         * cgen.c (gas_cgen_parse_operand): Do not set BSF_RELC flag on
 792         local symbols.
 793
 794 2012-02-12  Iain Sandoe  <idsandoe@googlemail.com>
 795
 796         * config/obj-macho.c (obj_mach_o_indirect_symbol): Force promotion of
 797         any local symbol used as an indirect.
 798
 799 2012-02-10  Iain Sandoe  <idsandoe@googlemail.com>
 800
 801         * config/obj-macho.c (obj_mach_o_make_or_get_sect): Always fill in
 802         stub size when provided.  (obj_mach_o_section): Flag that stub-size
 803         has been provided.
 804
 805 2012-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 806
 807         * config/tc-i386.c (HLE_PREFIX): New.
 808         (check_hle): Likewise.
 809         (_i386_insn): Add have_hle.
 810         (cpu_arch): Add .hle and .rtm.
 811         (md_assemble): Call check_hle if i.have_hle isn't zero.
 812         (parse_insn): Set i.have_hle to 1 for HLE prefix.
 813         (output_jump): Support up to 2 byte opcode.
 814
 815         * doc/c-i386.texi: Document hle/.hle and rtm/.rtm.
 816
 817 2012-02-02  Tristan Gingold  <gingold@adacore.com>
 818
 819         * config/obj-macho.c (obj_mach_o_zerofill): Silent
 820         uninitialized variable warning.
 821
 822 2012-02-02  Nick Clifton  <nickc@redhat.com>
 823
 824         PR gas/13224
 825         * config/obj-elf.c (obj_elf_parse_section_letters): Rename 'clone'
 826         to 'is_clone' to avoid shadowing a gloabl.
 827         (obj_elf_section): Likewise.
 828
 829 2012-01-31  Paul Brook  <paul@codesourcery.com>
 830
 831         * doc/c-tic6x.c: Fix typo.
 832
 833 2012-01-26  Alexey Makhalov  <makhaloff@gmail.com>
 834
 835         PR gas/13624
 836         * app.c (app_push): Set 'add_newlines' to zero after saving.
 837
 838 2012-01-24  DJ Delorie  <dj@redhat.com>
 839
 840         * config/rl78-parse.y (NOT1): Add.
 841
 842 2012-01-23  Roland McGrath  <mcgrathr@google.com>
 843
 844         * configure.tgt (i386-*-nacl*): Match it.
 845         * config/te-nacl.h: New file.
 846         * config/tc-i386.h [TE_NACL] (ELF_TARGET_FORMAT): Define for this case.
 847         * config/tc-i386.c [TE_NACL] (i386_comment_chars, PREFIX_SEPARATOR):
 848         Use TE_GNU et al case for TE_NACL too.
 849
 850 2012-01-20  H.J. Lu  <hongjiu.lu@intel.com>
 851
 852         * config/tc-i386.c (_i386_insn): Replace disp32_encoding with
 853         disp_encoding.
 854         (md_assemble): Updated.
 855         (output_branch): Likewise.
 856         (parse_insn): Support .d8 suffix.
 857         (build_modrm_byte): Fake zero displacement for .d8 and .d32
 858         suffixes.
 859
 860         * doc/c-i386.texi: Document .d8 suffix.
 861
 862 2012-01-17  Andrew Burgess  <aburgess@broadcom.com>
 863
 864         * write.c (fix_new_internal): Don't mark used parameter as unused.
 865
 866 2012-01-17  Alan Modra  <amodra@gmail.com>
 867
 868         * as.c (parse_args): Update copyright message year.
 869
 870 2012-01-13  H.J. Lu  <hongjiu.lu@intel.com>
 871
 872         * config/tc-i386.c (cpu_arch): Add ".vmfunc".
 873
 874         * doc/c-i386.texi: Document vmfunc.
 875
 876 2012-01-13  Tristan Gingold  <gingold@adacore.com>
 877
 878         * config/obj-macho.c (obj_mach_o_reorder_section_relocs): New.
 879         * config/obj-macho.h (SET_SECTION_RELOCS): Define.
 880         (obj_mach_o_reorder_section_relocs): Declare.
 881
 882 2012-01-13  Iain Sandoe  <idsandoe@googlemail.com>
 883
 884         * config/obj-macho.c (obj_mach_o_set_indirect_symbols): Handle
 885         absolute indirect symbols.
 886
 887 2012-01-13  Iain Sandoe  <idsandoe@googlemail.com>
 888
 889         * config/obj-macho.c (obj_mach_o_set_vma_data): New type.
 890         (obj_mach_o_set_section_vma): New.
 891         (obj_mach_o_post_relax_hook): New.
 892         * config/obj-macho.h (md_post_relax_hook): Define.
 893         (obj_mach_o_post_relax_hook): Declare.
 894
 895 2012-01-12  Iain Sandoe  <idsandoe@googlemail.com>
 896
 897         * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Switch off
 898         lazy when the symbol is private_extern.
 899         (obj_mach_o_indirect_sym): New type.
 900         (obj_mach_o_indirect_symbol): New.
 901         (mach_o_pseudo_table): Use obj_mach_o_indirect_symbol.
 902         (obj_macho_frob_label): Adjust to avoid adding bsyms for locals.
 903         (obj_macho_frob_label): Likewise.  Adjust external and comm
 904         symbol tests.
 905         (obj_mach_o_set_indirect_symbols): New.
 906         (obj_mach_o_frob_file_after_relocs): New.
 907         *config/obj-macho.h (obj_frob_file_after_relocs): Define.
 908         (obj_mach_o_frob_file_after_relocs): Declare.
 909
 910 2012-01-12  Tristan Gingold  <gingold@adacore.com>
 911
 912         PR gas/13591
 913         * config/obj-coff.h (sy_obj): Rename macro to avoid a name conflict.
 914
 915 2012-01-10  Tristan Gingold  <gingold@adacore.com>
 916
 917         * struc-symbol.h (struct symbol_flags): New struct, created from...
 918         (struct symbol): ... this one.  Add sy_flags field, remove flag fields.
 919         (struct local_symbol): Replace lsy_marker field by lsy_flags.
 920         Adjust comment.
 921         (local_symbol_resolved_p): Adjust.
 922         (local_symbol_mark_resolved): Likewise.
 923         * symbols.c (LOCAL_SYMBOL_CHECK): Adjust.
 924         (local_symbol_make, local_symbol_convert, colon)
 925         (symbol_clone_if_forward_ref, verify_symbol_chain)
 926         (resolve_symbol_value, snapshot_symbol, S_GET_VALUE)
 927         (S_IS_WEAKREFR, S_IS_WEAKREFD, S_IS_VOLATILE, S_IS_FORWARD_REF)
 928         (S_SET_WEAKREFR, S_CLEAR_WEAKREFR, S_SET_WEAKREFD)
 929         (S_CLEAR_WEAKREFD, S_SET_VOLATILE, S_CLEAR_VOLATILE)
 930         (S_SET_FORWARD_REF, symbol_same_p, symbol_mark_used)
 931         (symbol_clear_used, symbol_used_p, symbol_mark_used_in_reloc)
 932         (symbol_clear_used_in_reloc, symbol_used_in_reloc_p)
 933         (symbol_mark_mri_common, symbol_clear_mri_common)
 934         (symbol_mri_common_p, symbol_mark_written, symbol_clear_written)
 935         (symbol_written_p, symbol_mark_resolved, symbol_resolved_p)
 936         (symbol_equated_reloc_p, dot_symbol_init)
 937         (print_symbol_value_1): Adjust.
 938
 939 2012-01-09  Iain Sandoe  <idsandoe@googlemail.com>
 940
 941         * config/obj-macho.c (obj_mach_o_weak): Remove.
 942         (obj_mach_o_common_parse): Set symbol qualifiers.
 943         (LAZY, REFE): New macros.
 944         (obj_mach_o_symbol_type): New enum.
 945         (obj_mach_o_set_symbol_qualifier): New.
 946         (obj_mach_o_sym_qual): New.
 947         (mach_o_pseudo_table): Add symbol qualifiers, set indirect_symbol to
 948         a dummy function.
 949         (obj_mach_o_type_for_symbol): New.
 950         (obj_macho_frob_label): New.
 951         (obj_macho_frob_symbol): New.
 952         * config/obj-macho.h (S_SET_ALIGN): Amend temorary var name.
 953         (obj_frob_label, obj_macho_frob_label): Declare.
 954         (obj_frob_symbol, obj_macho_frob_symbol): Declare.
 955
 956 2012-01-08  Richard Sandiford  <rdsandiford@googlemail.com>
 957
 958         * config/tc-mips.c (s_tls_rel_directive): Call mips_clear_insn_labels.
 959
 960 2012-01-08  Andrew Pinski  <andrew.pinski@caviumnetworks.com>
 961             Richard Sandiford  <rdsandiford@googlemail.com>
 962
 963         * config/tc-mips.c (mips_move_labels): Take the list of labels and
 964         textness as parameters.
 965         (mips_move_text_labels): New function.
 966         (append_insn): Use it instead of mips_move_labels.
 967         (mips_emit_delays, start_noreorder): Likewise.
 968         (mips_align): Take the labels rather than just one label.
 969         Move all labels to after the .align.
 970         (s_align): Change the last argument to mips_align.
 971         (s_cons): Likewise.
 972         (s_float_cons): Likewise.
 973         (s_gpword): Likewise.
 974         (s_gpdword): Likewise.
 975
 976 2012-01-06  Tristan Gingold  <gingold@adacore.com>
 977
 978         * config/tc-i386.c: Update copyright year.
 979         (lex_got): Also defined for Mach-O.
 980         Add a guard for non-ELF configuration.
 981         (md_longopts): Also handle -64 for Mach-O.
 982         (md_parse_option): Likewise.
 983         (i386_target_format): Adjust for x86_64-darwin.
 984
 985 2012-01-04  Iain Sandoe  <idsandoe@googlemail.com>
 986
 987         * config/obj-macho.c (obj_mach_o_segT_from_bfd_name): Tidy definition.
 988         (obj_mach_o_get_section_names): New (split from obj_mach_o_section).
 989         (obj_mach_o_make_or_get_sect): Likewise.
 990         (obj_mach_o_section): Split out the functionality shared with zerofill.
 991         (obj_mach_o_zerofill): New.
 992         (obj_mach_o_common_parse): Ensure whitespace is skipped.
 993         (mach_o_pseudo_table): Add .zerofill.
 994
 995 2012-01-03  Iain Sandoe  <idsandoe@googlemail.com>
 996
 997         * config/obj-macho.c (obj_macho_process_stab): New.
 998         * config/obj-macho.h (OBJ_PROCESS_STAB): Define.
 999         (obj_macho_process_stab): Declare.
1000
1001 For older changes see ChangeLog-2011
1002 \f
1003 Local Variables:
1004 mode: change-log
1005 left-margin: 8
1006 fill-column: 74
1007 version-control: never
1008 End: