gas/ChangeLog

   1 2014-10-21  Jan Beulich  <jbeulich@suse.com>
   2
   3         * config/tc-aarch64.c (output_operand_error_record): Move down
   4         assertion of idx being non-negative. Use local variables when
   5         available.
   6
   7 2014-10-18  Alan Modra  <amodra@gmail.com>
   8
   9         PR 17493
  10         * write.c (adjust_reloc_syms): Don't allow symbols in reg_section
  11         to be reduced to reg_section section symbol.
  12         * gas/config/tc-i386.c (i386_finalize_immediate): Reject all
  13         reg_section immediates.
  14
  15 2014-10-17  Matthew Fortune  <matthew.fortune@imgtec.com>
  16
  17         * doc/c-mips.texi: Fix bad @value references.
  18
  19 2014-10-15  Tristan Gingold  <gingold@adacore.com>
  20
  21         * configure: Regenerate.
  22
  23 2014-10-15  Chen Gang  <gang.chen.5i5j@gmail.com>
  24
  25         * config/tc-tic4x.c (md_assemble): Correct strncat size.
  26
  27 2014-10-14  Tristan Gingold  <gingold@adacore.com>
  28
  29         * NEWS: Add marker for 2.25.
  30
  31 2014-10-14  Alan Modra  <amodra@gmail.com>
  32
  33         PR 17453
  34         * config/tc-i386.c (fits_in_signed_long): Use unsigned param and
  35         expression to avoid signed overflow.
  36         (fits_in_signed_byte, fits_in_unsigned_byte, fits_in_unsigned_word,
  37         fits_in_signed_word, fits_in_unsigned_long): Similarly.
  38         * expr.c (operand <'-'>): Avoid signed overflow.
  39         * read.c (s_comm_internal): Likewise.
  40
  41 2014-10-14  Alan Modra  <amodra@gmail.com>
  42
  43         * config/tc-sparc.c (sparc_md_end): Fix unused variable warnings.
  44
  45 2014-10-09  Jose E. Marchesi  <jose.marchesi@oracle.com>
  46
  47         * config/tc-sparc.c (v9a_asr_table): Entry for %cps removed.
  48         (sparc_arch_table): Remove the HWCAP_RANDOM, HWCAP_TRANS and
  49         HWCAP_ASI_CACHE_SPARING from the architectures using them.
  50         (HWS_V8): New define.
  51         (HWS_V9): Likewise.
  52         (HWS_VA): Likewise.
  53         (HWS_VB): Likewise.
  54         (HWS_VC): Likewise.
  55         (HWS_VD): Likewise.
  56         (HWS_VE): Likewise.
  57         (HWS_VV): Likewise.
  58         (sparc_arch): Use the HWS_* macros.  Fix the `sparc4' architecture
  59         to cover the HWCAP_ASI_BLK_INIT and HWCAP_IMA capabilities.
  60         (hwcap_seen): Variable widened to 64 bits.
  61         (hwcap_allowed): Likewise.
  62         (sparc_arch): new field `hwcap2_allowed'.
  63         (sparc_arch_table): provide hwcap2_allowed values for existing
  64         archs.
  65         (sparc_md_end): Add a HWCAPS2 object attribute to the elf object
  66         in case any of the HWCAP2_* caps are used.
  67         (sparc_ip): Take into account the new hwcaps2 bitmap to build the
  68         list of seen/allowed hwcaps.
  69         (get_hwcap_name): Argument widened to 64 bits to handle HWCAP2
  70         bits.
  71         (HWS_VM): New define.
  72         (HWS2_VM): Likewise.
  73         (sparc_arch): New architectures `sparc5', `v9m' and `v8plusm'.
  74         (v9a_asr_table): Add the %mwait (%asr28) ancillary state register
  75         to the table.
  76         (sparc_ip): Handle the %mcdper ancillary state register as an
  77         operand.
  78         (sparc_ip): Handle } arguments as fdrd floating point registers
  79         (double) that are the same than frs1.
  80         * doc/c-sparc.texi (Sparc-Opts): Document the -Av9e, -Av8pluse and
  81         -xarch=v9e command line options.  Also fix the description of the
  82         -Av9v and -Av8plusv command line options.
  83         Document the -Av9m, -Av8plusm,-Asparc5, -xarch=v9m and
  84         -xarch=sparc5 command line options.
  85
  86 2014-09-29  Terry Guo  <terry.guo@arm.com>
  87
  88         * as.c (create_obj_attrs_section): Move it and call it from ...
  89         * write.c (create_obj_attrs_section): ... here.
  90         (subsegs_finish_section): Refactored.
  91
  92 2014-09-27  Alan Modra  <amodra@gmail.com>
  93
  94         * dwarf2dbg.c (all_segs_hash): Delete.
  95         (get_line_subseg): Delete last_seg, last_subseg, last_line_subseg.
  96         Retrieve line_seg for section via seg_info.
  97         * subsegs.h (segment_info_typet): Add dwarf2_line_seg.
  98
  99 2014-09-23  H.J. Lu  <hongjiu.lu@intel.com>
 100
 101         PR gas/17421
 102         * config/tc-i386.c (md_assemble): Disallow VEX/EVEX encoded
 103         instructions in 16-bit mode.
 104
 105 2014-09-22  Alan Modra  <amodra@gmail.com>
 106
 107         * config/tc-m68k.c (md_assemble): Add assert to work around
 108         bogus trunk gcc warning.
 109         * config/tc-pj.h (md_convert_frag): Warning fix.
 110         * config/tc-xtensa.c (xg_assemble_vliw_tokens): Warning fix.
 111
 112 2014-09-17  Tristan Gingold  <gingold@adacore.com>
 113
 114         * config/tc-arm.c (move_or_literal_pool, add_to_lit_pool): Use
 115         bfd_int64_t instead of int64_t.
 116
 117 2014-09-16  Ilya Tocar  <ilya.tocar@intel.com>
 118
 119         * config/tc-i386.c (evexrcig): New.
 120         (build_evex_prefix): Force rounding bits.
 121         (OPTION_MEVEXRCIG): New.
 122         (md_longopts): Add mevexrcig.
 123         (md_parse_option): Handle OPTION_MEVEXRCIG.
 124         (md_show_usage): Document mevexrcig.
 125         * doc/c-i386.texi (mevexrcig): Document new option.
 126
 127 2014-09-16  Kuan-Lin Chen  <kuanlinchentw@gmail.com>
 128
 129         * config/tc-nds32.c (nds32_fsrs, nds32_fdrs, nds32_gprs): Remove.
 130         (relax_table): Add new relaxation pattern.
 131         (do_pseudo_la_internal, do_pseudo_ls_bhw): Expand for PIC suffix.
 132         (do_pseudo_move, do_pseudo_neg, do_pseudo_pushpopm): Fix.
 133         (get_range_type, nds32_elf_record_fixup_exp, nds32_get_align,
 134         nds32_elf_build_relax_relation, md_assemble, invalid_prev_frag,
 135         nds32_relax_frag, md_estimate_size_before_relax): Adjust relaxation.
 136         (relocation_table): Remove.
 137         (relax_ls_table): Load-store relaxation pattern.
 138         (hint_map): Define-use chain pattern.
 139         (nds32_find_reloc_table, nds32_match_hint_insn): Analysis
 140         relaxation pattern.
 141         (nds32_parse_name): Parse PIC suffix.
 142         * config/tc-nds32.h: Declare.
 143
 144 2014-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 145
 146         * config/tc-i386.c (OPTION_omit_lock_prefix): Renamed to ...
 147         (OPTION_OMIT_LOCK_PREFIX): This.
 148         (md_longopts): Updated.
 149         (md_parse_option): Likewise.
 150
 151 2014-09-15  Andrew Bennett  <andrew.bennett@imgtec.com>
 152             Matthew Fortune  <matthew.fortune@imgtec.com>
 153
 154         * config/tc-mips.c (mips_nan2008): New static global.
 155         (mips_flag_nan2008): Removed.
 156         (LL_SC_FMT): New define.
 157         (COP12_FMT): Updated.
 158         (ISA_IS_R6): New define.
 159         (ISA_HAS_64BIT_REGS): Add mips64r6.
 160         (ISA_HAS_DROR): Likewise.
 161         (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
 162         (ISA_HAS_ROR): Likewise.
 163         (ISA_HAS_ODD_SINGLE_FPR): Likewise.
 164         (ISA_HAS_MXHC1): Likewise.
 165         (hilo_interlocks): Likewise.
 166         (md_longopts): Likewise.
 167         (ISA_HAS_LEGACY_NAN): New define.
 168         (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
 169         (mips_ase): Add field rem_rev.
 170         (mips_ases): Updated to add which ISA an ASE was removed in.
 171         (mips_isa_rev): Add support for mips32r6 and mips64r6.
 172         (mips_check_isa_supports_ase): Add support to check if an ASE
 173         has been removed in the specified MIPS ISA revision.
 174         (validate_mips_insn): Skip '-' character.
 175         (macro_build): Likewise.
 176         (mips_check_options): Prevent R6 working with fp32, mips16,
 177         micromips, or branch relaxation.
 178         (file_mips_check_options): Set R6 floating point registers to
 179         64 bit.  Also deal with the nan2008 option.
 180         (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
 181         BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
 182         BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
 183         BFD_RELOC_LO16_PCREL.
 184         (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
 185         and OP_NON_ZERO_REG.
 186         (match_check_prev_operand): New static function.
 187         (match_same_rs_rt_operand): New static function.
 188         (match_non_zero_reg_operand): New static function.
 189         (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
 190         and OP_NON_ZERO_REG.
 191         (insns_between): Added case to deal with forbidden slots.
 192         (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
 193         and BFD_RELOC_MIPS_26_PCREL_S2.
 194         (match_insn): Add support for operands -A, -B, +' and +".  Also
 195         skip '-' character.
 196         (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
 197         (md_parse_option): Add support for mips32r6 and mips64r6.  Also
 198         update the nan option handling.
 199         (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
 200         BFD_RELOC_MIPS_26_PCREL_S2.
 201         (mips_force_relocation): Prevent forced relaxation for MIPS r6.
 202         (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
 203         BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
 204         BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
 205         BFD_RELOC_LO16_PCREL.
 206         (s_mipsset): Add support for mips32r6 and mips64r6.
 207         (s_nan): Update to support the new nan2008 framework.
 208         (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
 209         BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
 210         BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
 211         BFD_RELOC_LO16_PCREL.
 212         (mips_elf_final_processing): Updated to use the mips_nan2008.
 213         (mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
 214         (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
 215         macros for R6.
 216         (mips_fix_adjustable): Make PC relative R6 relocations relative
 217         to the symbol and not the section.
 218         * configure.ac: Add support for mips32r6 and mips64r6.
 219         * configure: Regenerate.
 220         * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
 221         options.
 222         * doc/as.texinfo: Likewise.
 223
 224 2014-09-15  Matthew Fortune  <matthew.fortune@imgtec.com>
 225
 226         * tc-mips.c (check_fpabi): Move softfloat and singlefloat
 227         checks higher.
 228
 229 2014-09-12  Jose E. Marchesi  <jose.marchesi@oracle.com>
 230
 231         * config/tc-sparc.c (sparc_ip): Update the set of allowed hwcaps
 232         when bumping the current architecture.
 233         (md_begin): Adjust the highetst architecture level also when a
 234         specific architecture is not requested.
 235
 236 2014-09-12  Andrew Bennett  <andrew.bennett@imgtec.com>
 237
 238         * configure.tgt: Add mips*-img-elf* target triple.
 239
 240 2014-09-12  Alan Modra  <amodra@gmail.com>
 241
 242         * config/tc-i386.c (match_template): Remove redundant "!!" testing
 243         single-bit bitfields.
 244         (build_modrm_byte): Don't compare single-bit bitfields to "1".
 245
 246 2014-09-09  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
 247
 248         * config/tc-arm.c (arm_cpus): Add cortex-a17.
 249
 250 2014-09-03  Jiong Wang  <jiong.wang@arm.com>
 251
 252         * config/tc-aarch64.c (parse_sys_reg): Remove the restriction on op0
 253         field.
 254
 255 2014-09-03  Jiong Wang  <jiong.wang@arm.com>
 256
 257         * config/tc-aarch64.c (parse_operands): Recognize PAIRREG.
 258         (aarch64_features): Add entry for lse extension.
 259
 260 2014-08-26  Jiong Wang  <jiong.wang@arm.com>
 261
 262         * config/tc-arm.c (aeabi_set_public_attributes): Update selected_cpu
 263         based on the info we got during parsing.
 264         (arm_handle_align): Make sure the p2align expanding logic under thumb
 265         unchanged.
 266
 267 2014-08-26  Maciej W. Rozycki  <macro@codesourcery.com>
 268
 269         * config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
 270         jump to...
 271         <M_SAAD_AB>: ... here.  Assert that !microMIPS.
 272
 273 2014-08-26  Jan-Benedict Glaw  <jbglaw@lug-owl.de>
 274
 275         * config/tc-moxie.h (md_convert_frag): Silence warning.
 276
 277 2014-08-22  Richard Henderson  <rth@redhat.com>
 278
 279         * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
 280         register number for vector register types.
 281         * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
 282         (DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
 283
 284 2014-08-22  Maciej W. Rozycki  <macro@codesourcery.com>
 285
 286         * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
 287         flag if both the processor and opcode flags match.
 288
 289 2014-08-22  Maciej W. Rozycki  <macro@codesourcery.com>
 290
 291         * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
 292
 293 2014-08-20  Maciej W. Rozycki  <macro@codesourcery.com>
 294
 295         * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
 296         (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
 297         (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
 298
 299 2014-08-20  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
 300
 301         * config/tc-arm.c (parse_ifimm_zero): New function.
 302         (enum operand_parse_code): Add OP_RSVD_FI0 value.
 303         (parse_operands): Handle OP_RSVD_FI0.
 304         (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
 305
 306 2014-08-20  Alan Modra  <amodra@gmail.com>
 307
 308         * Makefile.am: Typo fix.
 309         * Makefile.in: Regenerate.
 310         * po/POTFILES.in: Regenerate.
 311
 312 2014-08-19  Andreas Tobler  <andreast@fgznet.ch>
 313
 314         * Makefile.am: Add FreeBSD ARM support.
 315         * Mafefile.in: Regenerate.
 316         * configure.tgt: Add FreeBSD ARM support.
 317         * config/te-armfbsdeabi.h: New file.
 318         * config/te-armfbsdvfp.h: Likewise.
 319
 320 2014-08-19  Alan Modra  <amodra@gmail.com>
 321
 322         * configure: Regenerate.
 323
 324 2014-08-18  Nick Clifton  <nickc@redhat.com>
 325
 326         * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
 327         RELOC_RL78_DIFF fixups.
 328
 329 2014-08-18  Alan Modra  <amodra@gmail.com>
 330
 331         * read.c (parse_mri_cons): Warning fix.
 332
 333 2014-08-14  Alan Modra  <amodra@gmail.com>
 334
 335         * configure.ac: Move ACX_LARGEFILE after LT_INIT.
 336         * config.in: Regenerate.
 337         * configure: Regenerate.
 338
 339 2014-08-06  Ilya Tocar  <ilya.tocar@intel.com>
 340
 341         * config/tc-i386.c (omit_lock_prefix): New.
 342         (output_insn): Omit lock prefix if omit_lock_prefix is true.
 343         (OPTION_omit_lock_prefix): New.
 344         (md_longopts): Add momit-lock-prefix.
 345         (md_parse_option): Handle momit-lock-prefix.
 346         (md_show_usage): Add momit-lock-prefix=[no|yes].
 347         * doc/c-i386.texi (momit-lock-prefix): Document.
 348
 349 2014-08-01  Takashi Yoshii  <yoshii.takashi@renesas.com>
 350
 351         PR 10378
 352         * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
 353         SWITCH_TABLE case.
 354
 355 2014-07-29  Matthew Fortune  <matthew.fortune@imgtec.com>
 356
 357         * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
 358         and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
 359
 360 2014-07-29  Matthew Fortune  <matthew.fortune@imgtec.com>
 361
 362         * config/tc-mips.c (mips_flags_frag): New static global.
 363         (struct mips_set_options): Add oddspreg field.
 364         (file_mips_opts, mips_opts): Initialize oddspreg.
 365         (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
 366         Loongson-3a.
 367         (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
 368         and -mno-odd-spreg options.
 369         (md_begin): Create .MIPS.abiflags section.
 370         (fpabi_incompatible_with, fpabi_requires): New static function.
 371         (check_fpabi): Likewise.
 372         (mips_check_options): Handle fp=xx and oddspreg restrictions.
 373         (file_mips_check_options): Set oddspreg by default for fp=xx.
 374         (mips_oddfpreg_ok): Re-write function.
 375         (check_regno): Check odd numbered registers regardless of FPR size.
 376         For fp != 32 use as_bad instead of as_warn.
 377         (match_float_constant): Rewrite check regarding FP register width.  Add
 378         support for generating constants when MXHC1 is present.  Handle fp=xx
 379         to comply with the ABI.
 380         (macro): Update M_LI_DD similarly to match_float_constant.  Generate
 381         MTHC1 when available.  Check that correct code can be generated for
 382         fp=xx and fp=64 ABIs.
 383         (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
 384         options.
 385         (mips_convert_ase_flags): New static function.
 386         (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
 387         to determine when to add the EF_MIPS_FP64 flag.  Populate the
 388         .MIPS.abiflags section.
 389         (md_mips_end): Update .gnu_attribute based on command line and .module
 390         as applicable.  Use check_fpabi to ensure .gnu.attribute and command
 391         line/.module options are consistent.
 392         * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
 393         -mfpxx, -modd-spreg and -mno-odd-spreg options.
 394         * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
 395         gnu_attribute values and FP ABIs.
 396
 397 2014-07-27  Joel Sherrill <joel.sherrill@oarcorp.com>
 398
 399         Add RTEMS target support and simplify matching
 400
 401         * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
 402         (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
 403
 404 2014-07-27  Anthony Green  <green@moxielogic.com>
 405
 406         * configure.tgt (generic_target): Add moxie-*-moxiebox*
 407         * config/tc-moxie.c: Remove moxie_target_format.
 408         (md_begin): Set default target_big_endian.
 409         * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
 410         (TARGET_FORMAT): Set based on target_big_endian.
 411
 412 2014-07-26  Alan Modra  <amodra@gmail.com>
 413
 414         * config/bfin-parse.y: Don't include obstack.h.
 415         * config/obj-aout.c: Likewise.
 416         * config/obj-coff.c: Likewise.
 417         * config/obj-som.c: Likewise.
 418         * config/tc-bfin.c: Likewise.
 419         * config/tc-i960.c: Likewise.
 420         * config/tc-rl78.c: Likewise.
 421         * config/tc-rx.c: Likewise.
 422         * config/tc-tic4x.c: Likewise.
 423         * expr.c: Likewise.
 424         * listing.c: Likewise.
 425         * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
 426         * config/tc-aarch64.c (symbol_locate): Likewise.
 427         * config/tc-arm.c (symbol_locate): Likewise.
 428         * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
 429         * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
 430         (s3_build_dependency_insn_hsh): Likewise.
 431         * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
 432         (s7_build_dependency_insn_hsh): Likewise.
 433         * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
 434         (frag_new): Make parameter a size_t.
 435         (frag_var_init): Make max_chars and var parameters size_t.
 436         (frag_var, frag_variant): Likewise.
 437         (frag_room): Return a size_t.
 438         (frag_align_pattern): Make n_fill parameter a size_t.
 439         * frags.h: Update function prototypes.
 440         * symbols.c (save_symbol_name): Make name_length a size_t.
 441
 442 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 443             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 444             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 445             Sergey Lega  <sergey.s.lega@intel.com>
 446             Anna Tikhonova  <anna.tikhonova@intel.com>
 447             Ilya Tocar  <ilya.tocar@intel.com>
 448             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 449             Ilya Verbin  <ilya.verbin@intel.com>
 450             Kirill Yukhin  <kirill.yukhin@intel.com>
 451             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 452
 453         * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
 454         * doc/c-i386.texi: Document avx512dq/.avx512dq.
 455
 456 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 457             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 458             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 459             Sergey Lega  <sergey.s.lega@intel.com>
 460             Anna Tikhonova  <anna.tikhonova@intel.com>
 461             Ilya Tocar  <ilya.tocar@intel.com>
 462             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 463             Ilya Verbin  <ilya.verbin@intel.com>
 464             Kirill Yukhin  <kirill.yukhin@intel.com>
 465             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 466
 467         * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
 468         * doc/c-i386.texi: Document avx512bw/.avx512bw.
 469
 470 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 471             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 472             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 473             Sergey Lega  <sergey.s.lega@intel.com>
 474             Anna Tikhonova  <anna.tikhonova@intel.com>
 475             Ilya Tocar  <ilya.tocar@intel.com>
 476             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 477             Ilya Verbin  <ilya.verbin@intel.com>
 478             Kirill Yukhin  <kirill.yukhin@intel.com>
 479             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 480
 481         * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
 482         (build_vex_prefix): Don't abort on VEX.W.
 483         (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
 484         (check_VecOperations): Ditto.
 485         * doc/c-i386.texi: Document avx512vl/.avx512vl.
 486
 487 2014-07-21  Joel Sherrill  <joel.sherrill@oarcorp.com>
 488
 489         Add or reactivate or1k-*-rtems*
 490         * gas/configure.tgt (or1k-*-rtems*): Add.
 491
 492 2014-07-17  Ilya Tocar  <ilya.tocar@intel.com>
 493
 494         * config/tc-i386.c (parse_register): Set need_vrex.
 495
 496 2014-07-15  Jiong Wang  <jiong.wang@arm.com>
 497
 498         * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
 499         sign extension.  Casting the type of imm1 and imm2 to offsetT.  Fix
 500         one logic error when checking X_op.
 501
 502 2014-07-14  Andreas Schwab  <schwab@linux-m68k.org>
 503
 504         * config/tc-m68k.c (md_convert_frag_1): Don't complain with
 505         --pcrel about TAB (DBCCLBR, LONG) conversion.
 506
 507 2014-07-12  David Majnemer  <david.majnemer@gmail.com>
 508
 509         * read.c (assign_symbol): Don't force "set" symbols local for PE.
 510
 511 2014-07-08  Jiong Wang  <jiong.wang@arm.com>
 512
 513         * config/tc-arm.c (literal_pool): New field "alignment".
 514         (find_or_make_literal_pool): Initialize "alignment" to 2.
 515         (s_ltorg): Align the pool using value of "alignment"
 516         (parse_big_immediate): New parameter "in_exp". Return
 517         parsed expression if "in_exp" is not null.
 518         (parse_address_main): Invoke "parse_big_immediate" for
 519         constant parameter.
 520         (add_to_lit_pool): Add one parameter 'nbytes'.
 521         Split 8 byte entry into two 4 byte entry.
 522         Add padding to align 8 byte entry to 8 byte boundary.
 523         (encode_arm_cp_address): Generate literal pool entry if possible.
 524         (move_or_literal_pool): Generate entry for vldr case.
 525         (enum lit_type): New enum type.
 526         (do_ldst): Use new enum type.
 527         (do_ldstv4): Likewise.
 528         (do_t_ldst): Likewise.
 529         (neon_write_immbits): Support Thumb-2 mode.
 530
 531 2014-07-07  Barney Stratford  <barney_stratford@fastmail.fm>
 532
 533         * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
 534         name as [xyz][hl].  Permit using a symbol whoes name begins with
 535         ‘r’ to refer to a register.
 536         Allow arbitrary expressions for the P and p operators.
 537         (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
 538         BFD_RELOC_AVR_PORT6 relocations.
 539
 540 2014-07-04  Alan Modra  <amodra@gmail.com>
 541
 542         * doc/internals.texi: Update "configure.in" comments.
 543         * acinclude.m4: Likewise.
 544         * config/tc-sparc.c: Likewise.
 545
 546 2014-07-04  Alan Modra  <amodra@gmail.com>
 547
 548         * configure.ac: Rename from configure.in.
 549         * Makefile.in: Regenerate.
 550         * config.in: Regenerate.
 551         * doc/Makefile.in: Regenerate.
 552
 553 2014-07-04  Alan Modra  <amodra@gmail.com>
 554
 555         * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
 556         * doc/Makefile.in: Regenerate.
 557
 558 2014-07-04  Alan Modra  <amodra@gmail.com>
 559
 560         * configure.in: Include bfd/version.m4.
 561         (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
 562         (BFD_VERSION): Delete.
 563         * configure.com: Get bfd version from bfd/version.m4.
 564         * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
 565         * configure: Regenerate.
 566         * Makefile.in: Regenerate.
 567         * doc/Makefile.in: Regenerate.
 568
 569 2014-07-01  Barney Stratford   <barney_stratford@fastmail.fm>
 570             Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 571             Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
 572             Soundararajan  <Sounderarajan.D@atmel.com>
 573
 574         * config/tc-avr.c (mcu_types): Add avrtiny arch.
 575         Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
 576         and attiny40.
 577         (md_show_usage): Add avrtiny arch in usage message.
 578         (avr_operand): validate and issue error for invalid register for
 579         avrtiny.
 580         add new reloc exp for 16 bit lds/sts instruction.
 581         (md_apply_fix): check 16 bit lds/sts operand for out of range and
 582         encode.
 583         (md_assemble): check ISA for arch and issue diagnostic.
 584         * NEWS: Mention new support.
 585         * doc/c-avr.texi: Document support for avrtiny architecture.
 586
 587 2014-06-27  Alan Modra  <amodra@gmail.com>
 588
 589         * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
 590         SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
 591         (obj_mach_o_frob_label): Avoid cascading errors.
 592         (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
 593
 594 2014-06-18  DJ Delorie  <dj@redhat.com>
 595
 596         * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
 597         suffix optional.
 598
 599 2014-06-17  Hans-Peter Nilsson  <hp@bitrange.com>
 600
 601         * config/tc-mmix.c (loc_assert_s): New member frag.
 602         (s_loc): Set it.
 603         (mmix_md_end): If an error is reported for a LOC expression, patch
 604         up the related frag.
 605
 606 2014-06-17  Chris Metcalf  <cmetcalf@tilera.com>
 607
 608         PR gas/16908
 609         * macro.c (buffer_and_nest): Honour #line directives inside
 610         macros.
 611
 612 2014-06-17 Jiong Wang <jiong.wang@arm.com>
 613
 614         * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
 615
 616 2014-06-17  Hans-Peter Nilsson  <hp@axis.com>
 617
 618         * config/tc-cris.c (cris_bad): New function.
 619         (cris_process_instruction): Where applicable, use it instead of
 620         as_bad.
 621
 622 2014-06-16  Nick Clifton  <nickc@redhat.com>
 623
 624         * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
 625
 626 2014-06-16  Jiong Wang  <jiong.wang@arm.com>
 627
 628         * config/tc-aarch64.c (END_OF_INSN): New macro.
 629         (parse_operands): Handle operand given and in wrong format when
 630         operand is optional.
 631
 632 2014-06-16  Alan Modra  <amodra@gmail.com>
 633
 634         * write.h (subsegs_finish): Delete declaration.
 635         * write.c (subsegs_finish): Make static.
 636         (write_object_file): Call subsegs_finish from here.  Don't print
 637         warning and error count here..
 638         * as.c (main): ..do so here instead.  Remove dead code for "no
 639         object file generated".  Split out count strings to better support
 640         internationalisation.  Don't call subsegs_finish. Tidy setting of
 641         "keep_it".  Run write_object_file even after errors.
 642         (keep_it): Make static.
 643         * config/obj-elf.c (elf_frob_symbol): Remove assert.
 644         (elf_frob_file_before_adjust): Likewise.
 645
 646 2014-06-16  Alan Modra  <amodra@gmail.com>
 647
 648         * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
 649         earlier.
 650
 651 2014-06-16  Alan Modra  <amodra@gmail.com>
 652
 653         * config/tc-i386.c (reloc): Don't avoid pcrel check for
 654         BFD_RELOC_SIZE64.  Return NO_RELOC on failing pcrel check.
 655
 656 2014-06-16  Alan Modra  <amodra@gmail.com>
 657
 658         * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
 659         (tic6x_output_exidx_entry): Likewise.
 660         (md_apply_fix): Simplify 1 byte md_number_to_chars.
 661
 662 2014-06-16  Alan Modra  <amodra@gmail.com>
 663
 664         * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
 665         end of archive to temp file.
 666         (tic54x_start_line_hook): Start scan for parallel on next line,
 667         not one char into next line (which may overrun the buffer).
 668
 669 2014-06-16  Alan Modra  <amodra@gmail.com>
 670
 671         * config/tc-vax.c (md_apply_fix): Rewrite.
 672         (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
 673         define rather than the equivalent BFD_RELOC_NONE.
 674
 675 2014-06-16  Alan Modra  <amodra@gmail.com>
 676
 677         * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
 678         (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
 679         and BFD_RELOC_ARM_TLS* relocs.  Simplify BFD_RELOC_8 case.
 680
 681 2014-06-16  Alan Modra  <amodra@gmail.com>
 682
 683         * config/tc-cris.c (md_create_long_jump): Follow "short" jump
 684         with a nop rather than leaving uninitialised.
 685
 686 2014-06-13  Chen Gang  <gang.chen.5i5j@gmail.com>
 687
 688         * config/tc-score7.c: Replace sprintf with strcpy where
 689         appropriate.
 690         (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
 691         frag.
 692         * config/tc-score.c (s3_relax_branch_inst16): Likewise.
 693         (s3_relax_cmpbranch_inst32): Likewise.
 694
 695 2014-06-07  Alan Modra  <amodra@gmail.com>
 696
 697         * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
 698         on unsigned fields.  Comment on PPC_OPERAND_SIGNOPT signed fields
 699         in 64-bit mode.
 700
 701 2014-06-02  Martin Storsjo  <martin@martin.st>
 702
 703         * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
 704
 705 2014-06-05  Joel Brobecker  <brobecker@adacore.com>
 706
 707         * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
 708         bfd's development.sh.
 709         * Makefile.in, configure: Regenerate.
 710
 711 2014-06-03  Nick Clifton  <nickc@redhat.com>
 712
 713         * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
 714         (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
 715         * doc/c-msp430.texi: Update command line option description.
 716
 717 2014-05-22  Alan Modra  <amodra@gmail.com>
 718
 719         * listing.c (listing_warning, listing_error): Add space after colon.
 720         * messages.c (as_warn_internal, as_bad_internal): Use the same
 721         string as above.
 722
 723 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 724
 725         * config/tc-mips.c (file_mips_opts_checked): New static global.
 726         (s_module): New static function.
 727         (file_ase): Remove.
 728         (mips_pseudo_table): Add .module handler.
 729         (mips_set_ase): Add opts argument and use instead of mips_opts.
 730         (md_assemble): Use file_mips_check_options.
 731         (md_parse_option): Update to use file_mips_opts instead of mips_opts.
 732         (mips_set_architecture): Delete function.  Moved to...
 733         (mips_after_parse_args): Here.  All logic now applies to
 734         file_mips_opts first and then copies the final state to mips_opts.
 735         Move error checking and defaults inference to mips_check_options and
 736         file_mips_check_options.
 737         (mips_check_options): New static function.  Common option checking for
 738         command line, .module and .set.  Use .module values in error messages
 739         instead of refering to command line options.
 740         (file_mips_check_options): New static function.  A wrapper for
 741         mips_check_options with file_mips_opts.  Updates BFD arch based on
 742         final options.
 743         (s_mipsset): Split into s_mipsset and parse_code_option.  Settings
 744         supported by both .set and .module are moved to parse_code_option.
 745         Warnings and errors are kept in s_mipsset because when
 746         parse_code_option is used with s_module the warnings are deferred
 747         until code is generated.  Any setting supporting 'default' value is
 748         kept in s_mipsset as it is not applicable to s_module. Inferred
 749         settings are also kept in s_mipsset as s_module does not infer any
 750         settings.  Use mips_check_options.
 751         (parse_code_option): New static function derived from s_mipsset.
 752         (s_module): New static function that implements .module.  Allows file
 753         level settings to be changed until code is generated.
 754         (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
 755         (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
 756         (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
 757         (md_mips_end): Use file_mips_check_options.
 758         * doc/c-mips.texi: Document .module.
 759
 760 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 761
 762         * messages.c (as_warn_internal): Remove extra whitespace from
 763         warning messages.
 764
 765 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 766
 767         * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
 768         (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
 769
 770 2014-05-20  Mike Stump  <mikestump@comcast.net>
 771
 772         * messages.c (as_warn_internal): Ensure we don't interleave output
 773         within a single line when make -j is used.
 774         (as_bad_internal): Likewise.
 775
 776 2014-05-20  Richard Sandiford  <rdsandiford@googlemail.com>
 777
 778         * config/obj-elf.h (obj_elf_seen_attribute): Declare.
 779         * config/obj-elf.c (recorded_attribute_info): New structure.
 780         (recorded_attributes): New variable.
 781         (record_attribute, obj_elf_seen_attribute): New functions.
 782         (obj_elf_vendor_attribute): Record which attributes have been seen.
 783
 784 2014-05-20  Nick Clifton  <nickc@redhat.com>
 785
 786         * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
 787         Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
 788         (msp430_srcoperand): Store vshift value in operand.
 789
 790 2014-05-19  Nick Clifton  <nickc@redhat.com>
 791
 792         PR gas/16858
 793         * config/tc-i386.c (md_apply_fix): Improve the detection of code
 794         symbols for 32-bit PE targets.
 795
 796 2014-05-18  Richard Sandiford  <rdsandiford@googlemail.com>
 797
 798         * config/tc-mips.c (md_obj_begin): Delete.
 799         (md_obj_end): Fold into...
 800         (md_mips_end): ...here.  Move to end of file.
 801
 802 2014-05-17  Nick Clifton  <nickc@redhat.com>
 803
 804         PR gas/16946
 805         * config/tc-v850.c (handle_ctoff): Generate an error if called
 806         when using the RH850 ABI.
 807
 808 2014-05-16  Kaushik Phata  <Kaushik.Phatak@kpit.com>
 809
 810         * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
 811         and OPTION_64BIT_DOUBLES.
 812         (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
 813         (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
 814         (md_show_usage): Show all of the RL78 options.
 815         (rl78_float_cons): New static functions.
 816         (md_pseudo_table): Update handler for "double".
 817         * doc/c-rl78.texi: Document new options.
 818         * doc/as.texinfo: Likewise.
 819
 820 2014-05-13  Matthew Fortune  <matthew.fortune@imgtec.com>
 821
 822         * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
 823         (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
 824         (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
 825         (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
 826
 827 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 828
 829         * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
 830         references.
 831
 832 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 833
 834         * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
 835         Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
 836         (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
 837         file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
 838         one struct...
 839         (file_mips_opts): Here. New static global. Update throughout.
 840         (mips_opts): Update defaults for gp32 and fp.
 841
 842 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 843
 844         * config/tc-mips.c (streq): Define.
 845         (mips_convert_symbolic_attribute): New function.
 846         * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
 847         (mips_convert_symbolic_attribute): New prototype.
 848
 849 2014-05-02  Max Filippov  <jcmvbkbc@gmail.com>
 850
 851         * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
 852         fixups as signed.
 853
 854 2014-05-07  Andrew Bennett  <andrew.bennett@imgtec.com>
 855
 856         * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
 857         and mips64r5.
 858         (ISA_HAS_64BIT_FPRS): Likewise.
 859         (ISA_HAS_ROR): Likewise.
 860         (ISA_HAS_ODD_SINGLE_FPR): Likewise.
 861         (ISA_HAS_MXHC1): Likewise.
 862         (hilo_interlocks): Likewise.
 863         (md_longopts): Likewise.
 864         (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
 865         (ISA_HAS_DROR): Likewise.
 866         (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
 867         OPTION_MIPS64R5.
 868         (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
 869         mips64r5.
 870         (md_parse_option): Likewise.
 871         (s_mipsset): Likewise.
 872         (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
 873         and mips64r5.  Also change p5600 entry to be mips32r5.
 874         * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
 875         mips64r5.
 876         * configure: Regenerate.
 877         * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
 878         -mips64r5 command line options.
 879         * doc/as.texinfo: Likewise.
 880
 881 2014-04-28  Nick Clifton  <nickc@redhat.com>
 882
 883         PR gas/16858
 884         * config/tc-i386.c (md_apply_fix): Do not adjust value of
 885         pc-relative fixes against weak symbols.
 886
 887 2014-04-26  Alan Modra  <amodra@gmail.com>
 888
 889         * po/POTFILES.in: Regenerate.
 890
 891 2014-04-24  Nick Clifton  <nickc@redhat.com>
 892
 893         * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
 894         based targets.
 895
 896 2014-04-23  Will Newton  <will.newton@linaro.org>
 897
 898         * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
 899         directly instead of mapping_state.
 900
 901 2014-04-23  Andrew Bennett  <andrew.bennett@imgtec.com>
 902
 903         * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
 904         (md_longopts): Add xpa and no-xpa command line options.
 905         (mips_ases): Add MIPS XPA ASE.
 906         (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
 907         * doc/as.texinfo: Document the MIPS XPA command line options.
 908         * doc/c-mips.texi: Document the MIPS XPA command line options,
 909         and assembler directives.
 910
 911 2014-04-22  Sandra Loosemore  <sandra@codesourcery.com>
 912
 913         * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
 914         unbreak self-test mode.
 915
 916 2014-04-22  Max Filippov  <jcmvbkbc@gmail.com>
 917
 918         * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
 919         first section frag.
 920
 921 2014-04-22  Christian Svensson  <blue@cmd.nu>
 922
 923         * Makefile.am: Remove openrisc and or32 support.  Add support for or1k.
 924         * configure.in: Likewise.
 925         * configure.tgt: Likewise.
 926         * doc/as.texinfo: Likewise.
 927         * config/obj-coff.h: Likewise.
 928         * config/tc-or1k.c: New file.
 929         * config/tc-or1k.h: New file.
 930         * config/tc-openrisc.c: Delete.
 931         * config/tc-openrisc.h: Delete.
 932         * config/tc-or32.c: Delete.
 933         * config/tc-or32.h: Delete.
 934         * Makefile.in: Regenerate.
 935         * configure: Regenerate.
 936
 937 2014-04-16  Alan Modra  <amodra@gmail.com>
 938
 939         * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
 940         * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
 941
 942 2014-04-10  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 943
 944         * config/tc-avr.c: Add new flag mlink-relax.
 945         (md_show_usage): Add flag and help text.
 946         (md_parse_option): Record whether link relax is turned on.
 947         (relaxable_section): New.
 948         (avr_validate_fix_sub): New.
 949         (avr_force_relocation): New.
 950         (md_apply_fix): Generate DIFF reloc.
 951         (avr_allow_local_subtract): New.
 952
 953         * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
 954         (TC_FORCE_RELOCATION): Define.
 955         (TC_FORCE_RELOCATION_SUB_SAME): Define.
 956         (TC_VALIDATE_FIX_SUB): Define.
 957         (avr_force_relocation): Declare.
 958         (avr_validate_fix_sub): Declare.
 959         (md_allow_local_subtract): Define.
 960         (avr_allow_local_subtract): Declare.
 961
 962 2014-04-10  Andrew Bennett  <andrew.bennett@imgtec.com>
 963
 964         * config/tc-mips.c (mips_cpu_info_table): Add P5600
 965         configuation.
 966         * doc/c-mips.texi: Document p5600.
 967
 968 2014-04-09  Nick Clifton  <nickc@redhat.com>
 969
 970         * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
 971         * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
 972         * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
 973         * read.c (emit_expr_fix): Mark the r parameter as potentially
 974         unused.
 975
 976 2014-04-09  Alan Modra  <amodra@gmail.com>
 977
 978         * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
 979         New static vars.
 980         (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
 981         (ppc_elf_cons_fix_check): New function.
 982         (md_assemble): Set last_insn, last_seg, last_subseg.
 983         (ppc_byte, md_apply_fix): Handle warn_476.
 984         * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
 985         (ppc_elf_cons_fix_check): Declare.
 986         * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
 987
 988 2014-04-09  Alan Modra  <amodra@gmail.com>
 989
 990         * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
 991         * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
 992         * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
 993         (TC_CONS_FIX_NEW): Add RELOC parameter.
 994         * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
 995         * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
 996         * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
 997         * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 998         * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
 999         * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
1000         * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1001         * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
1002         * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
1003         Similarly.
1004         * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
1005         * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
1006         * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
1007         * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
1008         * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
1009         * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1010         * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
1011         * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1012         * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
1013         * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
1014         Similarly.
1015         * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
1016         * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
1017         Similarly.
1018         * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
1019         * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
1020         * gas/config/tc-avr.c (exp_mod_data): Make global.
1021         (pexp_mod_data): Delete.
1022         (avr_parse_cons_expression): Return exp_mod_data pointer.
1023         (avr_cons_fix_new): Add exp_mod_data_t pointer param.
1024         (exp_mod_data_t): Move typedef..
1025         * gas/config/tc-avr.h: ..to here.
1026         (exp_mod_data): Declare.
1027         (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
1028         (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
1029         (TC_CONS_FIX_NEW): Update.
1030         * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
1031         (cons_fix_new_hppa): Add hppa_field_selector param.
1032         (fix_new_hppa): Adjust.
1033         (parse_cons_expression_hppa): Return field selector.
1034         * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
1035         (cons_fix_new_hppa): Likewise.
1036         (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
1037         * gas/config/tc-i386.c (got_reloc): Delete static var.
1038         (x86_cons_fix_new): Add reloc param.
1039         (x86_cons): Return got reloc.
1040         * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
1041         (TC_CONS_FIX_NEW): Add RELOC param.
1042         * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param.  Adjust
1043         calls.
1044         * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
1045         (TC_CONS_FIX_NEW): Add reloc param.
1046         * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
1047         Return reloc.
1048         (cons_fix_new_microblaze): Add reloc param.
1049         * gas/config/tc-microblaze.h: Formatting.
1050         (parse_cons_expression_microblaze): Update proto.
1051         (cons_fix_new_microblaze): Likewise.
1052         * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
1053         (nios2_cons): Return ldo reloc.
1054         (nios2_cons_fix_new): Delete.
1055         * gas/config/tc-nios2.h (nios2_cons): Update prototype.
1056         (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
1057         * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
1058         short.  Make llong use cons.
1059         (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
1060         (ppc_elf_cons): Delete.
1061         (ppc_elf_parse_cons): New function.
1062         (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
1063         (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
1064         * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
1065         (ppc_elf_parse_cons): Declare.
1066         * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
1067         (sparc_cons): Return reloc specifier.
1068         (cons_fix_new_sparc): Add reloc specifier param.
1069         (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
1070         * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
1071         (TC_PARSE_CONS_RETURN_NONE): Define.
1072         (sparc_cons, cons_fix_new_sparc): Update prototype.
1073         * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
1074         (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
1075         (md_assemble): Likewise.
1076         (parse_cons_expression_v850): Return reloc.
1077         (cons_fix_new_v850): Add reloc parameter.
1078         * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
1079         (cons_fix_new_v850): Likewise.
1080         * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
1081         (vax_cons): Return reloc.
1082         (vax_cons_fix_new): Add reloc parameter.
1083         * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
1084         * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
1085         * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
1086         * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
1087         (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
1088         * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
1089         (do_parse_cons_expression): Adjust.
1090         (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
1091         to emit_expr_with_reloc.
1092         (emit_expr_with_reloc): New function handling reloc, mostly
1093         extracted from..
1094         (emit_expr): ..here.
1095         (emit_expr_fix): Add reloc param.  Adjust TC_CONS_FIX_NEW invocation.
1096         Handle reloc.
1097         (parse_mri_cons): Convert to ISO.
1098         * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
1099         (TC_PARSE_CONS_RETURN_NONE): Define.
1100         (emit_expr_with_reloc): Declare.
1101         (emit_expr_fix): Update prototype.
1102         * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
1103
1104 2014-04-03  Ilya Tocar  <ilya.tocar@intel.com>
1105
1106         * config/tc-i386.c (cpu_arch): Add .se1.
1107         * doc/c-i386.texi: Document .se1/se1.
1108
1109 2014-04-02  DJ Delorie  <dj@redhat.com>
1110
1111         * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
1112         pc-relative branches.
1113
1114 2014-04-02  Nick Clifton  <nickc@redhat.com>
1115
1116         PR gas/16765
1117         * config/tc-arm.c (create_unwind_entry): Report an error if an
1118         attempt to recreate an unwind directive is encountered.
1119
1120 2014-03-27  Nick Clifton  <nickc@redhat.com>
1121
1122         * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
1123         sprintf in order to avoid a compile time warning.
1124
1125 2014-03-26  Nick Clifton  <nickc@redhat.com>
1126
1127         * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
1128         relocation is used on an 8-bit operand or vice versa.
1129         (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
1130         (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
1131
1132 2014-03-25  Nick Clifton  <nickc@redhat.com>
1133
1134         * config/obj-coff-seh.c (obj_coff_seh_code): New function -
1135         switches the current segment back to the code segment recorded
1136         when seh_proc was last invoked.
1137         * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
1138
1139 2014-03-25  Alan Modra  <amodra@gmail.com>
1140
1141         * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
1142         (md_assemble): Likewise.  Warn.
1143
1144 2014-03-21  David Weatherford <weath@cadence.com>
1145             Max Filippov <jcmvbkbc@gmail.com>
1146
1147         * config/tc-xtensa.c (xtensa_check_frag_count)
1148         xtensa_create_trampoline_frag,
1149         xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
1150         find_trampoline_seg, search_trampolines, get_best_trampoline,
1151         check_and_update_trampolines, add_jump_to_trampoline,
1152         dump_trampolines): New functions.
1153         (md_parse_option): Add cases for --[no-]trampolines options.
1154         (md_assemble, finish_vinsn, xtensa_end): Add call to
1155         xtensa_check_frag_count.
1156         (xg_assemble_vliw_tokens): Add call to
1157         xtensa_maybe_create_trampoline_frag.
1158         (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
1159         (relax_frag_immed): Relax jump instructions that cannot reach its
1160         target.
1161         * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
1162         relax state.
1163         * doc/as.texinfo: Document --[no-]trampolines command-line options.
1164         * doc/c-xtensa.texi: Document trampolines relaxation and command
1165         line options.
1166         * frags.c (get_frag_count, clear_frag_count): New function.
1167         (frag_alloc): Increment totalfrags counter.
1168         * frags.h (get_frag_count, clear_frag_count): New function.
1169
1170 2014-03-20  DJ Delorie  <dj@redhat.com>
1171
1172         * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
1173         * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
1174         rl78_relax().
1175         * config/tc-rl78.h (md_relax_frag): Define.
1176         (rl78_relax_frag): Declare.
1177         * config/tc-rl78.c (rl78_relax): Add.
1178         (md_assemble): Set up the variable frags also when relaxing.
1179         (op_type_T): New.
1180         (rl78_opcode_type): New.
1181         (rl78_frag_fix_value): New.
1182         (md_estimate_size_before_relax): New-ish.
1183         (rl78_relax_frag): New.
1184         (md_convert_frag): New-ish.
1185
1186 2014-03-20  Richard Sandiford  <rdsandiford@googlemail.com>
1187
1188         * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
1189         * config/tc-mips.c (md_pcrel_from): Remove error message.
1190         (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
1191         BFD_RELOC_32_PCREL.  Report a specific error message for unhandled
1192         PC-relative expressions.  Handle BFD_RELOC_8.
1193
1194 2014-03-19  Jose E. Marchesi  <jose.marchesi@oracle.com>
1195
1196         * config/tc-sparc.c (hpriv_reg_table): Added entries for
1197         %hstick_offset and %hstick_enable.
1198         * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
1199         %hstick_enable hyperprivileged registers.
1200
1201 2014-03-19  Daniel Gutson <daniel.gutson@tallertechnologies.com>
1202             Nick Clifton  <nickc@redhat.com>
1203
1204         * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
1205         CCS syntax compatibility mode is on or off.
1206         (asmfunc_states): New enum to represent the asmfunc directive state.
1207         (asmfunc_state): New variable holding the asmfunc directive state.
1208         (comment_chars): Rename to arm_comment_chars.
1209         (line_separator_chars): Rename to arm_line_separator_chars.
1210         (s_ccs_ref): New function that handles the .ref directive.
1211         (asmfunc_debug): New function.
1212         (s_ccs_asmfunc): New function that handles the .asmfunc directive.
1213         (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
1214         (s_ccs_def): New function that handles the .def directive.
1215         (tc_start_label_without_colon): New function.
1216         (md_pseudo_table): Added new CCS directives.
1217         (arm_ccs_mode): New function that handles the -mccs command line option.
1218         (arm_long_opts): Added new -mccs command line option.
1219         * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
1220         (TC_START_LABEL_WITHOUT_COLON): New macro.
1221         (tc_start_label_without_colon): Added extern function declaration.
1222         (tc_comment_chars): Define.
1223         (tc_line_separator_chars): Define.
1224         * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
1225         * read.c (read_begin): Likewise.
1226         * doc/as.texinfo: Add documentation for the -mccs command line
1227         option.
1228         * doc/c-arm.texi: Likewise.
1229         * doc/internals.texi: Document tc_line_separator_chars.
1230         * NEWS: Mention the new feature.
1231
1232 2014-03-18  Jiong Wang  <jiong.wang@arm.com>
1233
1234         * config/tc-aarch64.c (aarch64_opts): Add new option
1235         "mno-verbose-error".
1236         (verbose_error_p): Initialize to 1.
1237         * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
1238         and -mno-verbose-error.
1239
1240 2014-03-17  Nick Clifton  <nickc@redhat.com>
1241
1242         PR gas/16694
1243         * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
1244         registers as well.
1245
1246 2014-03-13  Richard Earnshaw  <rearnsha@arm.com>
1247             Jiong Wang  <Jiong.Wang@arm.com>
1248
1249         * doc/c-aarch64.texi: Clean up some formatting issues.
1250         (AArch64 Options): Document -mcpu and -march.
1251         (AArch64 Extensions): New node.
1252
1253 2014-03-13  Tristan Gingold  <gingold@adacore.com>
1254
1255         * config/tc-i386.c (use_big_obj): Declare.
1256         (OPTION_MBIG_OBJ): Define.
1257         (md_longopts): Add -mbig-obj option.
1258         (md_parse_option): Handle it.
1259         (md_show_usage): Display help for this option.
1260         (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
1261         * doc/c-i386.texi: Document the option.
1262
1263 2014-03-12  Nick Clifton  <nickc@redhat.com>
1264
1265         PR gas/16688
1266         * config/tc-aarch64.c (literal_expression): New structure.
1267         (literal_pool): Replace exp array with literal_expression array.
1268         (add_to_lit_pool): When adding a bignum cache the big value.
1269         (s_ltorg): When emitting a bignum initialise the global bignum
1270         array from the cached value.
1271
1272 2014-03-12  Alan Modra  <amodra@gmail.com>
1273
1274         * Makefile.in: Regenerate.
1275         * config.in: Regenerate.
1276         * doc/Makefile.in: Regenerate.
1277
1278 2014-03-06  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
1279         Vishnu KS <Vishnu.k_s@atmel.com>
1280         Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
1281         Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
1282
1283         * gas/tc-avr.c: Add new devices
1284         avr25: ata5272, attiny828
1285         avr35: ata5505, attiny1634
1286         avr4: atmega8a, ata6285, ata6286, atmega48pa
1287         avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
1288         atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
1289         atmega16hva2
1290         avr51: atmega128a, atmega1284
1291         avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1292         atxmega32e5, atxmega16e5, atxmega8e5
1293         avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1294         atxmega64c3, atxmega64d4
1295         avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1296         atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1297         atxmega256c3, atxmega384c3, atxmega384d3
1298         avrxmega7: atxmega128a4u
1299         * doc/c-avr.texi: Ditto.
1300
1301 2014-03-05  Alan Modra  <amodra@gmail.com>
1302
1303         Update copyright years.
1304
1305 2014-03-05  Alan Modra  <amodra@gmail.com>
1306
1307         * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1308         (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1309
1310 2014-03-05  Alan Modra  <amodra@gmail.com>
1311
1312         * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1313         later.  Merge absolute and relative branch reloc selection.
1314         Generate 16-bit relocs for most 16-bit insn fields given a
1315         non-constant expression.
1316
1317 2014-03-05  Alan Modra  <amodra@gmail.com>
1318
1319         * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1320         (md_assemble): Don't call ppc_is_toc_sym for ELF.
1321
1322 2014-03-04  Heiher  <r@hev.cc>
1323
1324         * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1325         Loongson-3A.
1326
1327 2014-03-03  Nick Clifton  <nickc@redhat.com>
1328
1329         * config/msp430/msp430.c: Replace known mcu array with known
1330         msp430 ISA mcu name array.
1331         Accept any name for -mmcu option.
1332         Add -mz option to warn about missing NOP following an interrupt
1333         status change.
1334         (check_for_nop): New.
1335         (msp430_operands): Emit a warning, if requested, when an interrupt
1336         changing instruction is not followed by a NOP.
1337         * doc/c-msp430.c: Document -mz option.
1338
1339 2014-03-03  Alan Modra  <amodra@gmail.com>
1340
1341         * config/bfin-lex-wrapper.c: Correct copyright date.
1342         * config/obj-fdpicelf.c: Likewise.
1343         * config/obj-fdpicelf.h: Likewise.
1344         * config/tc-frv.c: Correct copyright punctuation.
1345         * config/tc-ip2k.c: Likewise.
1346         * config/tc-iq2000.c: Likewise.
1347         * config/tc-mep.c: Likewise.
1348         * config/tc-tic4x.c: Likewise.
1349         * config/tc-tic4x.h: Likewise.
1350
1351 2014-03-01  Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1352
1353         * config/tc-avr.c: Remove atxmega16x1.
1354
1355 2014-02-28  Alan Modra  <amodra@gmail.com>
1356
1357         * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1358         field for 64-bit dwarf.
1359
1360 2014-02-21  Ilya Tocar  <ilya.tocar@intel.com>
1361
1362         * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1363         * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1364
1365 2014-02-12  Ilya Tocar  <ilya.tocar@intel.com>
1366
1367         * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1368         * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1369         clflushopt/.clfushopt.
1370
1371 2014-02-10  Alan Modra  <amodra@gmail.com>
1372
1373         * po/POTFILES.in: Regenerate.
1374         * po/gas.pot: Regenerate.
1375
1376 2014-02-03  Sandra Loosemore  <sandra@codesourcery.com>
1377
1378         * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1379         (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1380         %got_hiadj relocation operators.  Sort table and add comment
1381         to explain ordering.
1382         (nios2_fix_adjustable): Test for new relocs.
1383         * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1384         operators.
1385
1386 2014-01-30  Sandra Loosemore  <sandra@codesourcery.com>
1387
1388         * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1389         (nios2_assemble_args_m): Likewise.
1390         (md_assemble): Likewise.
1391
1392 2014-01-24  DJ Delorie  <dj@redhat.com>
1393
1394         * config/tc-msp430.c (msp430_section): Always flag data sections,
1395         regardless of -md.
1396         (msp430_frob_section): New.  Make sure all sections are noticed if
1397         they have content.
1398         (msp430_lcomm): New.  Flag bss if .lcomm is seen.
1399         (msp430_comm): New.  Likewise.
1400         (md_pseudo_table): Add them.
1401         * config/tc-msp430.h (msp430_frob_section): Declare.
1402         (tc_frob_section): Define.
1403
1404 2014-01-23  Nick Clifton  <nickc@redhat.com>
1405
1406         * config/tc-msp430.c (show_mcu_list): Delete.
1407         (md_parse_option): Accept any MCU name.  Accept several more
1408         variants for the -mcpu option.
1409         (md_show_usage): Do not call show_mcu_list.
1410
1411 2014-01-22  DJ Delorie  <dj@redhat.com>
1412
1413         * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1414         * doc/c-msp430.texi (MSP430 Directives): Document it.
1415
1416 2014-01-22  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>
1417
1418         * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1419         gather assert.
1420
1421 2014-01-22  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>
1422
1423         PR gas/16489
1424         * config/tc-i386.c (check_VecOperands): Add check for invalid
1425         register set in AVX512 gathers.
1426
1427 2014-01-22  Alan Modra  <amodra@gmail.com>
1428
1429         * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1430
1431 2014-01-21  DJ Delorie  <dj@redhat.com>
1432
1433         * config/tc-rl78.c (require_end_of_expr): New.
1434         (md_operand): Call it.
1435         (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1436         as not overflowing.
1437
1438 2014-01-17  Will Newton  <will.newton@linaro.org>
1439
1440         * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1441         for the s32.f64 flavours of VCVT.
1442
1443 2014-01-14  Nick Clifton  <nickc@redhat.com>
1444
1445         PR gas/16434
1446         * config/tc-z80.c (wrong_match): Provide format string to
1447         as_warn.
1448         (parse_exp_not_indexed): Delete unused variable dummy.
1449         (emit_byte): Delete unused variable fixp.
1450
1451 2014-01-08  H.J. Lu  <hongjiu.lu@intel.com>
1452
1453         * config/tc-i386.c (regbnd): Removed.
1454         (vec_disp8): Likewise.
1455
1456 2014-01-08  H.J. Lu  <hongjiu.lu@intel.com>
1457
1458         * as.c (parse_args): Update copyright year to 2014.
1459
1460 2014-01-07  Tom Tromey  <tromey@redhat.com>
1461
1462         * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1463         wrappers.
1464
1465 2014-01-07  Tom Tromey  <tromey@redhat.com>
1466
1467         * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1468         use PARAMS.
1469
1470 2014-01-07  Tom Tromey  <tromey@redhat.com>
1471
1472         * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1473
1474 2013-01-07  Philipp Tomsich  <philipp.tomsich@theobroma-systems.com>
1475
1476         * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1477
1478 For older changes see ChangeLog-2013
1479 \f
1480 Copyright (C) 2014 Free Software Foundation, Inc.
1481
1482 Copying and distribution of this file, with or without modification,
1483 are permitted in any medium without royalty provided the copyright
1484 notice and this notice are preserved.
1485
1486 Local Variables:
1487 mode: change-log
1488 left-margin: 8
1489 fill-column: 74
1490 version-control: never
1491 End: