gas/ChangeLog

   1 2014-08-19  Alan Modra  <amodra@gmail.com>
   2
   3         * configure: Regenerate.
   4
   5 2014-08-18  Nick Clifton  <nickc@redhat.com>
   6
   7         * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
   8         RELOC_RL78_DIFF fixups.
   9
  10 2014-08-18  Alan Modra  <amodra@gmail.com>
  11
  12         * read.c (parse_mri_cons): Warning fix.
  13
  14 2014-08-14  Alan Modra  <amodra@gmail.com>
  15
  16         * configure.ac: Move ACX_LARGEFILE after LT_INIT.
  17         * config.in: Regenerate.
  18         * configure: Regenerate.
  19
  20 2014-08-06  Ilya Tocar  <ilya.tocar@intel.com>
  21
  22         * config/tc-i386.c (omit_lock_prefix): New.
  23         (output_insn): Omit lock prefix if omit_lock_prefix is true.
  24         (OPTION_omit_lock_prefix): New.
  25         (md_longopts): Add momit-lock-prefix.
  26         (md_parse_option): Handle momit-lock-prefix.
  27         (md_show_usage): Add momit-lock-prefix=[no|yes].
  28         * doc/c-i386.texi (momit-lock-prefix): Document.
  29
  30 2014-08-01  Takashi Yoshii  <yoshii.takashi@renesas.com>
  31
  32         PR 10378
  33         * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
  34         SWITCH_TABLE case.
  35
  36 2014-07-29  Matthew Fortune  <matthew.fortune@imgtec.com>
  37
  38         * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
  39         and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
  40
  41 2014-07-29  Matthew Fortune  <matthew.fortune@imgtec.com>
  42
  43         * config/tc-mips.c (mips_flags_frag): New static global.
  44         (struct mips_set_options): Add oddspreg field.
  45         (file_mips_opts, mips_opts): Initialize oddspreg.
  46         (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
  47         Loongson-3a.
  48         (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
  49         and -mno-odd-spreg options.
  50         (md_begin): Create .MIPS.abiflags section.
  51         (fpabi_incompatible_with, fpabi_requires): New static function.
  52         (check_fpabi): Likewise.
  53         (mips_check_options): Handle fp=xx and oddspreg restrictions.
  54         (file_mips_check_options): Set oddspreg by default for fp=xx.
  55         (mips_oddfpreg_ok): Re-write function.
  56         (check_regno): Check odd numbered registers regardless of FPR size.
  57         For fp != 32 use as_bad instead of as_warn.
  58         (match_float_constant): Rewrite check regarding FP register width.  Add
  59         support for generating constants when MXHC1 is present.  Handle fp=xx
  60         to comply with the ABI.
  61         (macro): Update M_LI_DD similarly to match_float_constant.  Generate
  62         MTHC1 when available.  Check that correct code can be generated for
  63         fp=xx and fp=64 ABIs.
  64         (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
  65         options.
  66         (mips_convert_ase_flags): New static function.
  67         (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
  68         to determine when to add the EF_MIPS_FP64 flag.  Populate the
  69         .MIPS.abiflags section.
  70         (md_mips_end): Update .gnu_attribute based on command line and .module
  71         as applicable.  Use check_fpabi to ensure .gnu.attribute and command
  72         line/.module options are consistent.
  73         * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
  74         -mfpxx, -modd-spreg and -mno-odd-spreg options.
  75         * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
  76         gnu_attribute values and FP ABIs.
  77
  78 2014-07-27  Joel Sherrill <joel.sherrill@oarcorp.com>
  79
  80         Add RTEMS target support and simplify matching
  81
  82         * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
  83         (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
  84
  85 2014-07-27  Anthony Green  <green@moxielogic.com>
  86
  87         * configure.tgt (generic_target): Add moxie-*-moxiebox*
  88         * config/tc-moxie.c: Remove moxie_target_format.
  89         (md_begin): Set default target_big_endian.
  90         * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
  91         (TARGET_FORMAT): Set based on target_big_endian.
  92
  93 2014-07-26  Alan Modra  <amodra@gmail.com>
  94
  95         * config/bfin-parse.y: Don't include obstack.h.
  96         * config/obj-aout.c: Likewise.
  97         * config/obj-coff.c: Likewise.
  98         * config/obj-som.c: Likewise.
  99         * config/tc-bfin.c: Likewise.
 100         * config/tc-i960.c: Likewise.
 101         * config/tc-rl78.c: Likewise.
 102         * config/tc-rx.c: Likewise.
 103         * config/tc-tic4x.c: Likewise.
 104         * expr.c: Likewise.
 105         * listing.c: Likewise.
 106         * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
 107         * config/tc-aarch64.c (symbol_locate): Likewise.
 108         * config/tc-arm.c (symbol_locate): Likewise.
 109         * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
 110         * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
 111         (s3_build_dependency_insn_hsh): Likewise.
 112         * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
 113         (s7_build_dependency_insn_hsh): Likewise.
 114         * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
 115         (frag_new): Make parameter a size_t.
 116         (frag_var_init): Make max_chars and var parameters size_t.
 117         (frag_var, frag_variant): Likewise.
 118         (frag_room): Return a size_t.
 119         (frag_align_pattern): Make n_fill parameter a size_t.
 120         * frags.h: Update function prototypes.
 121         * symbols.c (save_symbol_name): Make name_length a size_t.
 122
 123 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 124             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 125             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 126             Sergey Lega  <sergey.s.lega@intel.com>
 127             Anna Tikhonova  <anna.tikhonova@intel.com>
 128             Ilya Tocar  <ilya.tocar@intel.com>
 129             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 130             Ilya Verbin  <ilya.verbin@intel.com>
 131             Kirill Yukhin  <kirill.yukhin@intel.com>
 132             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 133
 134         * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
 135         * doc/c-i386.texi: Document avx512dq/.avx512dq.
 136
 137 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 138             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 139             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 140             Sergey Lega  <sergey.s.lega@intel.com>
 141             Anna Tikhonova  <anna.tikhonova@intel.com>
 142             Ilya Tocar  <ilya.tocar@intel.com>
 143             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 144             Ilya Verbin  <ilya.verbin@intel.com>
 145             Kirill Yukhin  <kirill.yukhin@intel.com>
 146             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 147
 148         * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
 149         * doc/c-i386.texi: Document avx512bw/.avx512bw.
 150
 151 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 152             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 153             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 154             Sergey Lega  <sergey.s.lega@intel.com>
 155             Anna Tikhonova  <anna.tikhonova@intel.com>
 156             Ilya Tocar  <ilya.tocar@intel.com>
 157             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 158             Ilya Verbin  <ilya.verbin@intel.com>
 159             Kirill Yukhin  <kirill.yukhin@intel.com>
 160             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 161
 162         * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
 163         (build_vex_prefix): Don't abort on VEX.W.
 164         (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
 165         (check_VecOperations): Ditto.
 166         * doc/c-i386.texi: Document avx512vl/.avx512vl.
 167
 168 2014-07-21  Joel Sherrill  <joel.sherrill@oarcorp.com>
 169
 170         Add or reactivate or1k-*-rtems*
 171         * gas/configure.tgt (or1k-*-rtems*): Add.
 172
 173 2014-07-17  Ilya Tocar  <ilya.tocar@intel.com>
 174
 175         * config/tc-i386.c (parse_register): Set need_vrex.
 176
 177 2014-07-15  Jiong Wang  <jiong.wang@arm.com>
 178
 179         * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
 180         sign extension.  Casting the type of imm1 and imm2 to offsetT.  Fix
 181         one logic error when checking X_op.
 182
 183 2014-07-14  Andreas Schwab  <schwab@linux-m68k.org>
 184
 185         * config/tc-m68k.c (md_convert_frag_1): Don't complain with
 186         --pcrel about TAB (DBCCLBR, LONG) conversion.
 187
 188 2014-07-12  David Majnemer  <david.majnemer@gmail.com>
 189
 190         * read.c (assign_symbol): Don't force "set" symbols local for PE.
 191
 192 2014-07-08  Jiong Wang  <jiong.wang@arm.com>
 193
 194         * config/tc-arm.c (literal_pool): New field "alignment".
 195         (find_or_make_literal_pool): Initialize "alignment" to 2.
 196         (s_ltorg): Align the pool using value of "alignment"
 197         (parse_big_immediate): New parameter "in_exp". Return
 198         parsed expression if "in_exp" is not null.
 199         (parse_address_main): Invoke "parse_big_immediate" for
 200         constant parameter.
 201         (add_to_lit_pool): Add one parameter 'nbytes'.
 202         Split 8 byte entry into two 4 byte entry.
 203         Add padding to align 8 byte entry to 8 byte boundary.
 204         (encode_arm_cp_address): Generate literal pool entry if possible.
 205         (move_or_literal_pool): Generate entry for vldr case.
 206         (enum lit_type): New enum type.
 207         (do_ldst): Use new enum type.
 208         (do_ldstv4): Likewise.
 209         (do_t_ldst): Likewise.
 210         (neon_write_immbits): Support Thumb-2 mode.
 211
 212 2014-07-07  Barney Stratford  <barney_stratford@fastmail.fm>
 213
 214         * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
 215         name as [xyz][hl].  Permit using a symbol whoes name begins with
 216         ‘r’ to refer to a register.
 217         Allow arbitrary expressions for the P and p operators.
 218         (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
 219         BFD_RELOC_AVR_PORT6 relocations.
 220
 221 2014-07-04  Alan Modra  <amodra@gmail.com>
 222
 223         * doc/internals.texi: Update "configure.in" comments.
 224         * acinclude.m4: Likewise.
 225         * config/tc-sparc.c: Likewise.
 226
 227 2014-07-04  Alan Modra  <amodra@gmail.com>
 228
 229         * configure.ac: Rename from configure.in.
 230         * Makefile.in: Regenerate.
 231         * config.in: Regenerate.
 232         * doc/Makefile.in: Regenerate.
 233
 234 2014-07-04  Alan Modra  <amodra@gmail.com>
 235
 236         * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
 237         * doc/Makefile.in: Regenerate.
 238
 239 2014-07-04  Alan Modra  <amodra@gmail.com>
 240
 241         * configure.in: Include bfd/version.m4.
 242         (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
 243         (BFD_VERSION): Delete.
 244         * configure.com: Get bfd version from bfd/version.m4.
 245         * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
 246         * configure: Regenerate.
 247         * Makefile.in: Regenerate.
 248         * doc/Makefile.in: Regenerate.
 249
 250 2014-07-01  Barney Stratford   <barney_stratford@fastmail.fm>
 251             Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 252             Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
 253             Soundararajan  <Sounderarajan.D@atmel.com>
 254
 255         * config/tc-avr.c (mcu_types): Add avrtiny arch.
 256         Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
 257         and attiny40.
 258         (md_show_usage): Add avrtiny arch in usage message.
 259         (avr_operand): validate and issue error for invalid register for
 260         avrtiny.
 261         add new reloc exp for 16 bit lds/sts instruction.
 262         (md_apply_fix): check 16 bit lds/sts operand for out of range and
 263         encode.
 264         (md_assemble): check ISA for arch and issue diagnostic.
 265         * NEWS: Mention new support.
 266         * doc/c-avr.texi: Document support for avrtiny architecture.
 267
 268 2014-06-27  Alan Modra  <amodra@gmail.com>
 269
 270         * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
 271         SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
 272         (obj_mach_o_frob_label): Avoid cascading errors.
 273         (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
 274
 275 2014-06-18  DJ Delorie  <dj@redhat.com>
 276
 277         * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
 278         suffix optional.
 279
 280 2014-06-17  Hans-Peter Nilsson  <hp@bitrange.com>
 281
 282         * config/tc-mmix.c (loc_assert_s): New member frag.
 283         (s_loc): Set it.
 284         (mmix_md_end): If an error is reported for a LOC expression, patch
 285         up the related frag.
 286
 287 2014-06-17  Chris Metcalf  <cmetcalf@tilera.com>
 288
 289         PR gas/16908
 290         * macro.c (buffer_and_nest): Honour #line directives inside
 291         macros.
 292
 293 2014-06-17 Jiong Wang <jiong.wang@arm.com>
 294
 295         * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
 296
 297 2014-06-17  Hans-Peter Nilsson  <hp@axis.com>
 298
 299         * config/tc-cris.c (cris_bad): New function.
 300         (cris_process_instruction): Where applicable, use it instead of
 301         as_bad.
 302
 303 2014-06-16  Nick Clifton  <nickc@redhat.com>
 304
 305         * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
 306
 307 2014-06-16  Jiong Wang  <jiong.wang@arm.com>
 308
 309         * config/tc-aarch64.c (END_OF_INSN): New macro.
 310         (parse_operands): Handle operand given and in wrong format when
 311         operand is optional.
 312
 313 2014-06-16  Alan Modra  <amodra@gmail.com>
 314
 315         * write.h (subsegs_finish): Delete declaration.
 316         * write.c (subsegs_finish): Make static.
 317         (write_object_file): Call subsegs_finish from here.  Don't print
 318         warning and error count here..
 319         * as.c (main): ..do so here instead.  Remove dead code for "no
 320         object file generated".  Split out count strings to better support
 321         internationalisation.  Don't call subsegs_finish. Tidy setting of
 322         "keep_it".  Run write_object_file even after errors.
 323         (keep_it): Make static.
 324         * config/obj-elf.c (elf_frob_symbol): Remove assert.
 325         (elf_frob_file_before_adjust): Likewise.
 326
 327 2014-06-16  Alan Modra  <amodra@gmail.com>
 328
 329         * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
 330         earlier.
 331
 332 2014-06-16  Alan Modra  <amodra@gmail.com>
 333
 334         * config/tc-i386.c (reloc): Don't avoid pcrel check for
 335         BFD_RELOC_SIZE64.  Return NO_RELOC on failing pcrel check.
 336
 337 2014-06-16  Alan Modra  <amodra@gmail.com>
 338
 339         * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
 340         (tic6x_output_exidx_entry): Likewise.
 341         (md_apply_fix): Simplify 1 byte md_number_to_chars.
 342
 343 2014-06-16  Alan Modra  <amodra@gmail.com>
 344
 345         * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
 346         end of archive to temp file.
 347         (tic54x_start_line_hook): Start scan for parallel on next line,
 348         not one char into next line (which may overrun the buffer).
 349
 350 2014-06-16  Alan Modra  <amodra@gmail.com>
 351
 352         * config/tc-vax.c (md_apply_fix): Rewrite.
 353         (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
 354         define rather than the equivalent BFD_RELOC_NONE.
 355
 356 2014-06-16  Alan Modra  <amodra@gmail.com>
 357
 358         * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
 359         (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
 360         and BFD_RELOC_ARM_TLS* relocs.  Simplify BFD_RELOC_8 case.
 361
 362 2014-06-16  Alan Modra  <amodra@gmail.com>
 363
 364         * config/tc-cris.c (md_create_long_jump): Follow "short" jump
 365         with a nop rather than leaving uninitialised.
 366
 367 2014-06-13  Chen Gang  <gang.chen.5i5j@gmail.com>
 368
 369         * config/tc-score7.c: Replace sprintf with strcpy where
 370         appropriate.
 371         (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
 372         frag.
 373         * config/tc-score.c (s3_relax_branch_inst16): Likewise.
 374         (s3_relax_cmpbranch_inst32): Likewise.
 375
 376 2014-06-07  Alan Modra  <amodra@gmail.com>
 377
 378         * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
 379         on unsigned fields.  Comment on PPC_OPERAND_SIGNOPT signed fields
 380         in 64-bit mode.
 381
 382 2014-06-02  Martin Storsjo  <martin@martin.st>
 383
 384         * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
 385
 386 2014-06-05  Joel Brobecker  <brobecker@adacore.com>
 387
 388         * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
 389         bfd's development.sh.
 390         * Makefile.in, configure: Regenerate.
 391
 392 2014-06-03  Nick Clifton  <nickc@redhat.com>
 393
 394         * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
 395         (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
 396         * doc/c-msp430.texi: Update command line option description.
 397
 398 2014-05-22  Alan Modra  <amodra@gmail.com>
 399
 400         * listing.c (listing_warning, listing_error): Add space after colon.
 401         * messages.c (as_warn_internal, as_bad_internal): Use the same
 402         string as above.
 403
 404 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 405
 406         * config/tc-mips.c (file_mips_opts_checked): New static global.
 407         (s_module): New static function.
 408         (file_ase): Remove.
 409         (mips_pseudo_table): Add .module handler.
 410         (mips_set_ase): Add opts argument and use instead of mips_opts.
 411         (md_assemble): Use file_mips_check_options.
 412         (md_parse_option): Update to use file_mips_opts instead of mips_opts.
 413         (mips_set_architecture): Delete function.  Moved to...
 414         (mips_after_parse_args): Here.  All logic now applies to
 415         file_mips_opts first and then copies the final state to mips_opts.
 416         Move error checking and defaults inference to mips_check_options and
 417         file_mips_check_options.
 418         (mips_check_options): New static function.  Common option checking for
 419         command line, .module and .set.  Use .module values in error messages
 420         instead of refering to command line options.
 421         (file_mips_check_options): New static function.  A wrapper for
 422         mips_check_options with file_mips_opts.  Updates BFD arch based on
 423         final options.
 424         (s_mipsset): Split into s_mipsset and parse_code_option.  Settings
 425         supported by both .set and .module are moved to parse_code_option.
 426         Warnings and errors are kept in s_mipsset because when
 427         parse_code_option is used with s_module the warnings are deferred
 428         until code is generated.  Any setting supporting 'default' value is
 429         kept in s_mipsset as it is not applicable to s_module. Inferred
 430         settings are also kept in s_mipsset as s_module does not infer any
 431         settings.  Use mips_check_options.
 432         (parse_code_option): New static function derived from s_mipsset.
 433         (s_module): New static function that implements .module.  Allows file
 434         level settings to be changed until code is generated.
 435         (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
 436         (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
 437         (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
 438         (md_mips_end): Use file_mips_check_options.
 439         * doc/c-mips.texi: Document .module.
 440
 441 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 442
 443         * messages.c (as_warn_internal): Remove extra whitespace from
 444         warning messages.
 445
 446 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 447
 448         * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
 449         (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
 450
 451 2014-05-20  Mike Stump  <mikestump@comcast.net>
 452
 453         * messages.c (as_warn_internal): Ensure we don't interleave output
 454         within a single line when make -j is used.
 455         (as_bad_internal): Likewise.
 456
 457 2014-05-20  Richard Sandiford  <rdsandiford@googlemail.com>
 458
 459         * config/obj-elf.h (obj_elf_seen_attribute): Declare.
 460         * config/obj-elf.c (recorded_attribute_info): New structure.
 461         (recorded_attributes): New variable.
 462         (record_attribute, obj_elf_seen_attribute): New functions.
 463         (obj_elf_vendor_attribute): Record which attributes have been seen.
 464
 465 2014-05-20  Nick Clifton  <nickc@redhat.com>
 466
 467         * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
 468         Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
 469         (msp430_srcoperand): Store vshift value in operand.
 470
 471 2014-05-19  Nick Clifton  <nickc@redhat.com>
 472
 473         PR gas/16858
 474         * config/tc-i386.c (md_apply_fix): Improve the detection of code
 475         symbols for 32-bit PE targets.
 476
 477 2014-05-18  Richard Sandiford  <rdsandiford@googlemail.com>
 478
 479         * config/tc-mips.c (md_obj_begin): Delete.
 480         (md_obj_end): Fold into...
 481         (md_mips_end): ...here.  Move to end of file.
 482
 483 2014-05-17  Nick Clifton  <nickc@redhat.com>
 484
 485         PR gas/16946
 486         * config/tc-v850.c (handle_ctoff): Generate an error if called
 487         when using the RH850 ABI.
 488
 489 2014-05-16  Kaushik Phata  <Kaushik.Phatak@kpit.com>
 490
 491         * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
 492         and OPTION_64BIT_DOUBLES.
 493         (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
 494         (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
 495         (md_show_usage): Show all of the RL78 options.
 496         (rl78_float_cons): New static functions.
 497         (md_pseudo_table): Update handler for "double".
 498         * doc/c-rl78.texi: Document new options.
 499         * doc/as.texinfo: Likewise.
 500
 501 2014-05-13  Matthew Fortune  <matthew.fortune@imgtec.com>
 502
 503         * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
 504         (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
 505         (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
 506         (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
 507
 508 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 509
 510         * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
 511         references.
 512
 513 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 514
 515         * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
 516         Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
 517         (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
 518         file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
 519         one struct...
 520         (file_mips_opts): Here. New static global. Update throughout.
 521         (mips_opts): Update defaults for gp32 and fp.
 522
 523 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 524
 525         * config/tc-mips.c (streq): Define.
 526         (mips_convert_symbolic_attribute): New function.
 527         * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
 528         (mips_convert_symbolic_attribute): New prototype.
 529
 530 2014-05-02  Max Filippov  <jcmvbkbc@gmail.com>
 531
 532         * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
 533         fixups as signed.
 534
 535 2014-05-07  Andrew Bennett  <andrew.bennett@imgtec.com>
 536
 537         * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
 538         and mips64r5.
 539         (ISA_HAS_64BIT_FPRS): Likewise.
 540         (ISA_HAS_ROR): Likewise.
 541         (ISA_HAS_ODD_SINGLE_FPR): Likewise.
 542         (ISA_HAS_MXHC1): Likewise.
 543         (hilo_interlocks): Likewise.
 544         (md_longopts): Likewise.
 545         (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
 546         (ISA_HAS_DROR): Likewise.
 547         (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
 548         OPTION_MIPS64R5.
 549         (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
 550         mips64r5.
 551         (md_parse_option): Likewise.
 552         (s_mipsset): Likewise.
 553         (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
 554         and mips64r5.  Also change p5600 entry to be mips32r5.
 555         * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
 556         mips64r5.
 557         * configure: Regenerate.
 558         * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
 559         -mips64r5 command line options.
 560         * doc/as.texinfo: Likewise.
 561
 562 2014-04-28  Nick Clifton  <nickc@redhat.com>
 563
 564         PR gas/16858
 565         * config/tc-i386.c (md_apply_fix): Do not adjust value of
 566         pc-relative fixes against weak symbols.
 567
 568 2014-04-26  Alan Modra  <amodra@gmail.com>
 569
 570         * po/POTFILES.in: Regenerate.
 571
 572 2014-04-24  Nick Clifton  <nickc@redhat.com>
 573
 574         * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
 575         based targets.
 576
 577 2014-04-23  Will Newton  <will.newton@linaro.org>
 578
 579         * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
 580         directly instead of mapping_state.
 581
 582 2014-04-23  Andrew Bennett  <andrew.bennett@imgtec.com>
 583
 584         * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
 585         (md_longopts): Add xpa and no-xpa command line options.
 586         (mips_ases): Add MIPS XPA ASE.
 587         (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
 588         * doc/as.texinfo: Document the MIPS XPA command line options.
 589         * doc/c-mips.texi: Document the MIPS XPA command line options,
 590         and assembler directives.
 591
 592 2014-04-22  Sandra Loosemore  <sandra@codesourcery.com>
 593
 594         * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
 595         unbreak self-test mode.
 596
 597 2014-04-22  Max Filippov  <jcmvbkbc@gmail.com>
 598
 599         * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
 600         first section frag.
 601
 602 2014-04-22  Christian Svensson  <blue@cmd.nu>
 603
 604         * Makefile.am: Remove openrisc and or32 support.  Add support for or1k.
 605         * configure.in: Likewise.
 606         * configure.tgt: Likewise.
 607         * doc/as.texinfo: Likewise.
 608         * config/obj-coff.h: Likewise.
 609         * config/tc-or1k.c: New file.
 610         * config/tc-or1k.h: New file.
 611         * config/tc-openrisc.c: Delete.
 612         * config/tc-openrisc.h: Delete.
 613         * config/tc-or32.c: Delete.
 614         * config/tc-or32.h: Delete.
 615         * Makefile.in: Regenerate.
 616         * configure: Regenerate.
 617
 618 2014-04-16  Alan Modra  <amodra@gmail.com>
 619
 620         * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
 621         * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
 622
 623 2014-04-10  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 624
 625         * config/tc-avr.c: Add new flag mlink-relax.
 626         (md_show_usage): Add flag and help text.
 627         (md_parse_option): Record whether link relax is turned on.
 628         (relaxable_section): New.
 629         (avr_validate_fix_sub): New.
 630         (avr_force_relocation): New.
 631         (md_apply_fix): Generate DIFF reloc.
 632         (avr_allow_local_subtract): New.
 633
 634         * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
 635         (TC_FORCE_RELOCATION): Define.
 636         (TC_FORCE_RELOCATION_SUB_SAME): Define.
 637         (TC_VALIDATE_FIX_SUB): Define.
 638         (avr_force_relocation): Declare.
 639         (avr_validate_fix_sub): Declare.
 640         (md_allow_local_subtract): Define.
 641         (avr_allow_local_subtract): Declare.
 642
 643 2014-04-10  Andrew Bennett  <andrew.bennett@imgtec.com>
 644
 645         * config/tc-mips.c (mips_cpu_info_table): Add P5600
 646         configuation.
 647         * doc/c-mips.texi: Document p5600.
 648
 649 2014-04-09  Nick Clifton  <nickc@redhat.com>
 650
 651         * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
 652         * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
 653         * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
 654         * read.c (emit_expr_fix): Mark the r parameter as potentially
 655         unused.
 656
 657 2014-04-09  Alan Modra  <amodra@gmail.com>
 658
 659         * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
 660         New static vars.
 661         (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
 662         (ppc_elf_cons_fix_check): New function.
 663         (md_assemble): Set last_insn, last_seg, last_subseg.
 664         (ppc_byte, md_apply_fix): Handle warn_476.
 665         * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
 666         (ppc_elf_cons_fix_check): Declare.
 667         * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
 668
 669 2014-04-09  Alan Modra  <amodra@gmail.com>
 670
 671         * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
 672         * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
 673         * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
 674         (TC_CONS_FIX_NEW): Add RELOC parameter.
 675         * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
 676         * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
 677         * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
 678         * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 679         * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
 680         * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
 681         * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 682         * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
 683         * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
 684         Similarly.
 685         * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
 686         * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
 687         * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
 688         * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
 689         * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
 690         * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 691         * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
 692         * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 693         * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
 694         * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
 695         Similarly.
 696         * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
 697         * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
 698         Similarly.
 699         * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
 700         * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
 701         * gas/config/tc-avr.c (exp_mod_data): Make global.
 702         (pexp_mod_data): Delete.
 703         (avr_parse_cons_expression): Return exp_mod_data pointer.
 704         (avr_cons_fix_new): Add exp_mod_data_t pointer param.
 705         (exp_mod_data_t): Move typedef..
 706         * gas/config/tc-avr.h: ..to here.
 707         (exp_mod_data): Declare.
 708         (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
 709         (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
 710         (TC_CONS_FIX_NEW): Update.
 711         * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
 712         (cons_fix_new_hppa): Add hppa_field_selector param.
 713         (fix_new_hppa): Adjust.
 714         (parse_cons_expression_hppa): Return field selector.
 715         * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
 716         (cons_fix_new_hppa): Likewise.
 717         (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
 718         * gas/config/tc-i386.c (got_reloc): Delete static var.
 719         (x86_cons_fix_new): Add reloc param.
 720         (x86_cons): Return got reloc.
 721         * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
 722         (TC_CONS_FIX_NEW): Add RELOC param.
 723         * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param.  Adjust
 724         calls.
 725         * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
 726         (TC_CONS_FIX_NEW): Add reloc param.
 727         * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
 728         Return reloc.
 729         (cons_fix_new_microblaze): Add reloc param.
 730         * gas/config/tc-microblaze.h: Formatting.
 731         (parse_cons_expression_microblaze): Update proto.
 732         (cons_fix_new_microblaze): Likewise.
 733         * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
 734         (nios2_cons): Return ldo reloc.
 735         (nios2_cons_fix_new): Delete.
 736         * gas/config/tc-nios2.h (nios2_cons): Update prototype.
 737         (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
 738         * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
 739         short.  Make llong use cons.
 740         (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 741         (ppc_elf_cons): Delete.
 742         (ppc_elf_parse_cons): New function.
 743         (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
 744         (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 745         * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
 746         (ppc_elf_parse_cons): Declare.
 747         * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
 748         (sparc_cons): Return reloc specifier.
 749         (cons_fix_new_sparc): Add reloc specifier param.
 750         (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
 751         * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
 752         (TC_PARSE_CONS_RETURN_NONE): Define.
 753         (sparc_cons, cons_fix_new_sparc): Update prototype.
 754         * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
 755         (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 756         (md_assemble): Likewise.
 757         (parse_cons_expression_v850): Return reloc.
 758         (cons_fix_new_v850): Add reloc parameter.
 759         * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
 760         (cons_fix_new_v850): Likewise.
 761         * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
 762         (vax_cons): Return reloc.
 763         (vax_cons_fix_new): Add reloc parameter.
 764         * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
 765         * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
 766         * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
 767         * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
 768         (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
 769         * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
 770         (do_parse_cons_expression): Adjust.
 771         (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
 772         to emit_expr_with_reloc.
 773         (emit_expr_with_reloc): New function handling reloc, mostly
 774         extracted from..
 775         (emit_expr): ..here.
 776         (emit_expr_fix): Add reloc param.  Adjust TC_CONS_FIX_NEW invocation.
 777         Handle reloc.
 778         (parse_mri_cons): Convert to ISO.
 779         * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
 780         (TC_PARSE_CONS_RETURN_NONE): Define.
 781         (emit_expr_with_reloc): Declare.
 782         (emit_expr_fix): Update prototype.
 783         * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
 784
 785 2014-04-03  Ilya Tocar  <ilya.tocar@intel.com>
 786
 787         * config/tc-i386.c (cpu_arch): Add .se1.
 788         * doc/c-i386.texi: Document .se1/se1.
 789
 790 2014-04-02  DJ Delorie  <dj@redhat.com>
 791
 792         * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
 793         pc-relative branches.
 794
 795 2014-04-02  Nick Clifton  <nickc@redhat.com>
 796
 797         PR gas/16765
 798         * config/tc-arm.c (create_unwind_entry): Report an error if an
 799         attempt to recreate an unwind directive is encountered.
 800
 801 2014-03-27  Nick Clifton  <nickc@redhat.com>
 802
 803         * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
 804         sprintf in order to avoid a compile time warning.
 805
 806 2014-03-26  Nick Clifton  <nickc@redhat.com>
 807
 808         * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
 809         relocation is used on an 8-bit operand or vice versa.
 810         (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
 811         (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
 812
 813 2014-03-25  Nick Clifton  <nickc@redhat.com>
 814
 815         * config/obj-coff-seh.c (obj_coff_seh_code): New function -
 816         switches the current segment back to the code segment recorded
 817         when seh_proc was last invoked.
 818         * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
 819
 820 2014-03-25  Alan Modra  <amodra@gmail.com>
 821
 822         * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
 823         (md_assemble): Likewise.  Warn.
 824
 825 2014-03-21  David Weatherford <weath@cadence.com>
 826             Max Filippov <jcmvbkbc@gmail.com>
 827
 828         * config/tc-xtensa.c (xtensa_check_frag_count)
 829         xtensa_create_trampoline_frag,
 830         xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
 831         find_trampoline_seg, search_trampolines, get_best_trampoline,
 832         check_and_update_trampolines, add_jump_to_trampoline,
 833         dump_trampolines): New functions.
 834         (md_parse_option): Add cases for --[no-]trampolines options.
 835         (md_assemble, finish_vinsn, xtensa_end): Add call to
 836         xtensa_check_frag_count.
 837         (xg_assemble_vliw_tokens): Add call to
 838         xtensa_maybe_create_trampoline_frag.
 839         (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
 840         (relax_frag_immed): Relax jump instructions that cannot reach its
 841         target.
 842         * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
 843         relax state.
 844         * doc/as.texinfo: Document --[no-]trampolines command-line options.
 845         * doc/c-xtensa.texi: Document trampolines relaxation and command
 846         line options.
 847         * frags.c (get_frag_count, clear_frag_count): New function.
 848         (frag_alloc): Increment totalfrags counter.
 849         * frags.h (get_frag_count, clear_frag_count): New function.
 850
 851 2014-03-20  DJ Delorie  <dj@redhat.com>
 852
 853         * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
 854         * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
 855         rl78_relax().
 856         * config/tc-rl78.h (md_relax_frag): Define.
 857         (rl78_relax_frag): Declare.
 858         * config/tc-rl78.c (rl78_relax): Add.
 859         (md_assemble): Set up the variable frags also when relaxing.
 860         (op_type_T): New.
 861         (rl78_opcode_type): New.
 862         (rl78_frag_fix_value): New.
 863         (md_estimate_size_before_relax): New-ish.
 864         (rl78_relax_frag): New.
 865         (md_convert_frag): New-ish.
 866
 867 2014-03-20  Richard Sandiford  <rdsandiford@googlemail.com>
 868
 869         * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
 870         * config/tc-mips.c (md_pcrel_from): Remove error message.
 871         (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
 872         BFD_RELOC_32_PCREL.  Report a specific error message for unhandled
 873         PC-relative expressions.  Handle BFD_RELOC_8.
 874
 875 2014-03-19  Jose E. Marchesi  <jose.marchesi@oracle.com>
 876
 877         * config/tc-sparc.c (hpriv_reg_table): Added entries for
 878         %hstick_offset and %hstick_enable.
 879         * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
 880         %hstick_enable hyperprivileged registers.
 881
 882 2014-03-19  Daniel Gutson <daniel.gutson@tallertechnologies.com>
 883             Nick Clifton  <nickc@redhat.com>
 884
 885         * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
 886         CCS syntax compatibility mode is on or off.
 887         (asmfunc_states): New enum to represent the asmfunc directive state.
 888         (asmfunc_state): New variable holding the asmfunc directive state.
 889         (comment_chars): Rename to arm_comment_chars.
 890         (line_separator_chars): Rename to arm_line_separator_chars.
 891         (s_ccs_ref): New function that handles the .ref directive.
 892         (asmfunc_debug): New function.
 893         (s_ccs_asmfunc): New function that handles the .asmfunc directive.
 894         (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
 895         (s_ccs_def): New function that handles the .def directive.
 896         (tc_start_label_without_colon): New function.
 897         (md_pseudo_table): Added new CCS directives.
 898         (arm_ccs_mode): New function that handles the -mccs command line option.
 899         (arm_long_opts): Added new -mccs command line option.
 900         * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
 901         (TC_START_LABEL_WITHOUT_COLON): New macro.
 902         (tc_start_label_without_colon): Added extern function declaration.
 903         (tc_comment_chars): Define.
 904         (tc_line_separator_chars): Define.
 905         * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
 906         * read.c (read_begin): Likewise.
 907         * doc/as.texinfo: Add documentation for the -mccs command line
 908         option.
 909         * doc/c-arm.texi: Likewise.
 910         * doc/internals.texi: Document tc_line_separator_chars.
 911         * NEWS: Mention the new feature.
 912
 913 2014-03-18  Jiong Wang  <jiong.wang@arm.com>
 914
 915         * config/tc-aarch64.c (aarch64_opts): Add new option
 916         "mno-verbose-error".
 917         (verbose_error_p): Initialize to 1.
 918         * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
 919         and -mno-verbose-error.
 920
 921 2014-03-17  Nick Clifton  <nickc@redhat.com>
 922
 923         PR gas/16694
 924         * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
 925         registers as well.
 926
 927 2014-03-13  Richard Earnshaw  <rearnsha@arm.com>
 928             Jiong Wang  <Jiong.Wang@arm.com>
 929
 930         * doc/c-aarch64.texi: Clean up some formatting issues.
 931         (AArch64 Options): Document -mcpu and -march.
 932         (AArch64 Extensions): New node.
 933
 934 2014-03-13  Tristan Gingold  <gingold@adacore.com>
 935
 936         * config/tc-i386.c (use_big_obj): Declare.
 937         (OPTION_MBIG_OBJ): Define.
 938         (md_longopts): Add -mbig-obj option.
 939         (md_parse_option): Handle it.
 940         (md_show_usage): Display help for this option.
 941         (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
 942         * doc/c-i386.texi: Document the option.
 943
 944 2014-03-12  Nick Clifton  <nickc@redhat.com>
 945
 946         PR gas/16688
 947         * config/tc-aarch64.c (literal_expression): New structure.
 948         (literal_pool): Replace exp array with literal_expression array.
 949         (add_to_lit_pool): When adding a bignum cache the big value.
 950         (s_ltorg): When emitting a bignum initialise the global bignum
 951         array from the cached value.
 952
 953 2014-03-12  Alan Modra  <amodra@gmail.com>
 954
 955         * Makefile.in: Regenerate.
 956         * config.in: Regenerate.
 957         * doc/Makefile.in: Regenerate.
 958
 959 2014-03-06  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
 960         Vishnu KS <Vishnu.k_s@atmel.com>
 961         Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 962         Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
 963
 964         * gas/tc-avr.c: Add new devices
 965         avr25: ata5272, attiny828
 966         avr35: ata5505, attiny1634
 967         avr4: atmega8a, ata6285, ata6286, atmega48pa
 968         avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
 969         atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
 970         atmega16hva2
 971         avr51: atmega128a, atmega1284
 972         avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
 973         atxmega32e5, atxmega16e5, atxmega8e5
 974         avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
 975         atxmega64c3, atxmega64d4
 976         avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
 977         atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
 978         atxmega256c3, atxmega384c3, atxmega384d3
 979         avrxmega7: atxmega128a4u
 980         * doc/c-avr.texi: Ditto.
 981
 982 2014-03-05  Alan Modra  <amodra@gmail.com>
 983
 984         Update copyright years.
 985
 986 2014-03-05  Alan Modra  <amodra@gmail.com>
 987
 988         * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
 989         (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
 990
 991 2014-03-05  Alan Modra  <amodra@gmail.com>
 992
 993         * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
 994         later.  Merge absolute and relative branch reloc selection.
 995         Generate 16-bit relocs for most 16-bit insn fields given a
 996         non-constant expression.
 997
 998 2014-03-05  Alan Modra  <amodra@gmail.com>
 999
1000         * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1001         (md_assemble): Don't call ppc_is_toc_sym for ELF.
1002
1003 2014-03-04  Heiher  <r@hev.cc>
1004
1005         * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1006         Loongson-3A.
1007
1008 2014-03-03  Nick Clifton  <nickc@redhat.com>
1009
1010         * config/msp430/msp430.c: Replace known mcu array with known
1011         msp430 ISA mcu name array.
1012         Accept any name for -mmcu option.
1013         Add -mz option to warn about missing NOP following an interrupt
1014         status change.
1015         (check_for_nop): New.
1016         (msp430_operands): Emit a warning, if requested, when an interrupt
1017         changing instruction is not followed by a NOP.
1018         * doc/c-msp430.c: Document -mz option.
1019
1020 2014-03-03  Alan Modra  <amodra@gmail.com>
1021
1022         * config/bfin-lex-wrapper.c: Correct copyright date.
1023         * config/obj-fdpicelf.c: Likewise.
1024         * config/obj-fdpicelf.h: Likewise.
1025         * config/tc-frv.c: Correct copyright punctuation.
1026         * config/tc-ip2k.c: Likewise.
1027         * config/tc-iq2000.c: Likewise.
1028         * config/tc-mep.c: Likewise.
1029         * config/tc-tic4x.c: Likewise.
1030         * config/tc-tic4x.h: Likewise.
1031
1032 2014-03-01  Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1033
1034         * config/tc-avr.c: Remove atxmega16x1.
1035
1036 2014-02-28  Alan Modra  <amodra@gmail.com>
1037
1038         * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1039         field for 64-bit dwarf.
1040
1041 2014-02-21  Ilya Tocar  <ilya.tocar@intel.com>
1042
1043         * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1044         * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1045
1046 2014-02-12  Ilya Tocar  <ilya.tocar@intel.com>
1047
1048         * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1049         * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1050         clflushopt/.clfushopt.
1051
1052 2014-02-10  Alan Modra  <amodra@gmail.com>
1053
1054         * po/POTFILES.in: Regenerate.
1055         * po/gas.pot: Regenerate.
1056
1057 2014-02-03  Sandra Loosemore  <sandra@codesourcery.com>
1058
1059         * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1060         (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1061         %got_hiadj relocation operators.  Sort table and add comment
1062         to explain ordering.
1063         (nios2_fix_adjustable): Test for new relocs.
1064         * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1065         operators.
1066
1067 2014-01-30  Sandra Loosemore  <sandra@codesourcery.com>
1068
1069         * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1070         (nios2_assemble_args_m): Likewise.
1071         (md_assemble): Likewise.
1072
1073 2014-01-24  DJ Delorie  <dj@redhat.com>
1074
1075         * config/tc-msp430.c (msp430_section): Always flag data sections,
1076         regardless of -md.
1077         (msp430_frob_section): New.  Make sure all sections are noticed if
1078         they have content.
1079         (msp430_lcomm): New.  Flag bss if .lcomm is seen.
1080         (msp430_comm): New.  Likewise.
1081         (md_pseudo_table): Add them.
1082         * config/tc-msp430.h (msp430_frob_section): Declare.
1083         (tc_frob_section): Define.
1084
1085 2014-01-23  Nick Clifton  <nickc@redhat.com>
1086
1087         * config/tc-msp430.c (show_mcu_list): Delete.
1088         (md_parse_option): Accept any MCU name.  Accept several more
1089         variants for the -mcpu option.
1090         (md_show_usage): Do not call show_mcu_list.
1091
1092 2014-01-22  DJ Delorie  <dj@redhat.com>
1093
1094         * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1095         * doc/c-msp430.texi (MSP430 Directives): Document it.
1096
1097 2014-01-22  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>
1098
1099         * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1100         gather assert.
1101
1102 2014-01-22  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>
1103
1104         PR gas/16489
1105         * config/tc-i386.c (check_VecOperands): Add check for invalid
1106         register set in AVX512 gathers.
1107
1108 2014-01-22  Alan Modra  <amodra@gmail.com>
1109
1110         * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1111
1112 2014-01-21  DJ Delorie  <dj@redhat.com>
1113
1114         * config/tc-rl78.c (require_end_of_expr): New.
1115         (md_operand): Call it.
1116         (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1117         as not overflowing.
1118
1119 2014-01-17  Will Newton  <will.newton@linaro.org>
1120
1121         * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1122         for the s32.f64 flavours of VCVT.
1123
1124 2014-01-14  Nick Clifton  <nickc@redhat.com>
1125
1126         PR gas/16434
1127         * config/tc-z80.c (wrong_match): Provide format string to
1128         as_warn.
1129         (parse_exp_not_indexed): Delete unused variable dummy.
1130         (emit_byte): Delete unused variable fixp.
1131
1132 2014-01-08  H.J. Lu  <hongjiu.lu@intel.com>
1133
1134         * config/tc-i386.c (regbnd): Removed.
1135         (vec_disp8): Likewise.
1136
1137 2014-01-08  H.J. Lu  <hongjiu.lu@intel.com>
1138
1139         * as.c (parse_args): Update copyright year to 2014.
1140
1141 2014-01-07  Tom Tromey  <tromey@redhat.com>
1142
1143         * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1144         wrappers.
1145
1146 2014-01-07  Tom Tromey  <tromey@redhat.com>
1147
1148         * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1149         use PARAMS.
1150
1151 2014-01-07  Tom Tromey  <tromey@redhat.com>
1152
1153         * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1154
1155 2013-01-07  Philipp Tomsich  <philipp.tomsich@theobroma-systems.com>
1156
1157         * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1158
1159 For older changes see ChangeLog-2013
1160 \f
1161 Copyright (C) 2014 Free Software Foundation, Inc.
1162
1163 Copying and distribution of this file, with or without modification,
1164 are permitted in any medium without royalty provided the copyright
1165 notice and this notice are preserved.
1166
1167 Local Variables:
1168 mode: change-log
1169 left-margin: 8
1170 fill-column: 74
1171 version-control: never
1172 End: