1 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
3 * configure.in (AC_CHECK_HEADERS): Add limits.h.
4 * configure: Regenerated.
7 * config/tc-i386.c: Include "opcodes/i386-init.h".
8 (_i386_insn): Use i386_operand_type for types.
9 (cpu_arch_flags): Updated to new types with bitfield.
10 (cpu_arch_tune_flags): Likewise.
11 (cpu_arch_isa_flags): Likewise.
13 (i386_align_code): Likewise.
14 (set_code_flag): Likewise.
15 (set_16bit_gcc_code_flag): Likewise.
16 (set_cpu_arch): Likewise.
17 (md_assemble): Likewise.
18 (parse_insn): Likewise.
19 (process_operands): Likewise.
20 (output_branch): Likewise.
21 (output_jump): Likewise.
22 (parse_real_register): Likewise.
23 (mode_from_disp_size): Likewise.
24 (smallest_imm_type): Likewise.
26 (type_names): Likewise.
29 (swap_2_operands): Likewise.
30 (optimize_imm): Likewise.
31 (optimize_disp): Likewise.
32 (match_template): Likewise.
33 (check_string): Likewise.
34 (process_suffix): Likewise.
35 (check_byte_reg): Likewise.
36 (check_long_reg): Likewise.
37 (check_qword_reg): Likewise.
38 (check_word_reg): Likewise.
39 (finalize_imm): Likewise.
40 (build_modrm_byte): Likewise.
41 (output_insn): Likewise.
42 (disp_size): Likewise.
44 (output_disp): Likewise.
45 (output_imm): Likewise.
47 (i386_immediate): Likewise.
48 (i386_displacement): Likewise.
49 (i386_index_check): Likewise.
50 (i386_operand): Likewise.
51 (parse_real_register): Likewise.
52 (i386_intel_operand): Likewise.
53 (intel_e09): Likewise.
54 (intel_bracket_expr): Likewise.
55 (intel_e11): Likewise.
56 (cpu_arch_flags_not): New.
57 (cpu_flags_check_x64): Likewise.
58 (cpu_flags_all_zero): Likewise.
59 (cpu_flags_not): Likewise.
60 (i386_cpu_flags_biop): Likewise.
61 (cpu_flags_biop): Likewise.
62 (cpu_flags_match); Likewise.
66 (reg16_inoutportreg): Likewise.
70 (disp16_32): Likewise.
72 (baseindex): Likewise.
81 (imm16_32s): Likewise.
82 (imm16_32_32s): Likewise.
83 (operand_type): Likewise.
84 (operand_type_check): Likewise.
85 (operand_type_match): Likewise.
86 (operand_type_register_match): Likewise.
87 (update_imm): Likewise.
88 (set_code_flag): Also update cpu_arch_flags_not.
89 (set_16bit_gcc_code_flag): Likewise.
91 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
92 Use cpu_flags_match to match instructions.
93 (i386_target_format): Update cpu_arch_isa_flags and
94 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
95 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
96 (match_template): Don't initialize overlap0, overlap1,
97 overlap2, overlap3 and operand_types.
98 (process_suffix): Handle crc32 with 64bit register.
100 (CONSISTENT_REGISTER_MATCH): Likewise.
102 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
105 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
107 * config/tc-i386.c (match_template): Handle invlpga, vmload,
108 vmrun and vmsave in SVME.
109 (process_suffix): Likewise.
111 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
113 * config/tc-i386.c (i386_index_check): Don't use RegRex
114 on the reg_type field.
115 (parse_real_register): Use `||' instead of `|'.
117 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
119 * config/tc-i386.c (process_operands): Remove segment override
120 check on SVME instructions.
121 (i386_index_check): Remove memory operand check on SVME
124 2007-09-04 Alan Modra <amodra@bigpond.net.au>
126 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
127 (md_assemble): Update init of insn. Use insn.reloc instead of
128 calculating from flag.
129 (get_imm): Set reloc rather than flag.
130 (calcop): Formatting.
132 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
134 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
136 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
138 * doc/c-arc.texi: Fix typo.
140 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
142 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
145 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
147 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
148 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
150 (m68k_cpus): Adjust 5407 entry.
152 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
154 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
155 (m68k_cpus): Define 51QE cpu.
157 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
158 Joseph Myers <joseph@codesourcery.com>
160 * as.c (main): Flush stderr before printing listings to ensure
161 consistent output order across platforms.
163 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
165 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
167 2007-08-24 Joseph Myers <joseph@codesourcery.com>
168 Paul Brook <paul@codesourcery.com>
171 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
172 * as.c (show_usage): Document --debug-prefix-map option.
173 (parse_args): Handle --debug-prefix-map.
174 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
175 * stabs.c (stabs_generate_asm_file): Remap debug paths.
176 * Makefile.am (GAS_CFILES): Add remap.c
177 (GENERIC_OBJS): Add remap.o.
178 Regenerate dependencies.
179 * Makefile.in: Regenerate.
180 * doc/as.texinfo (--debug-prefix-map): Document.
182 2007-08-24 Aurelien Jarno <aurel32@debian.org>
184 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
185 before printing them.
187 2007-08-24 Anders Waldenborg <anders@0x63.nu>
188 Alan Modra <amodra@bigpond.net.au>
190 * config/tc-i386.c (lex_got): Don't scan past a comma.
192 2007-08-23 Ben Elliston <bje@au.ibm.com>
194 * config/tc-ppc.c (parse_cpu): Handle "750cl".
195 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
196 (md_show_usage): Document -m750cl.
197 (md_assemble): Handle two delimiters in succession (eg. `),').
198 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
199 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
200 * testsuite/gas/ppc/ppc750ps.s: New file.
201 * testsuite/gas/ppc/ppc750ps.d: Likewise.
203 2007-08-23 Ben Elliston <bje@au.ibm.com>
205 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
207 2007-08-17 Alan Modra <amodra@bigpond.net.au>
210 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
212 (i386_immediate): Detect and complain about more cases of
213 invalid immediate expressions. Return failure rather than
214 converting them to zero.
215 (i386_displacement): Likewise.
217 2007-08-17 Alan Modra <amodra@bigpond.net.au>
219 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
221 2007-08-14 Andreas Schwab <schwab@suse.de>
223 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
226 2007-08-12 Matthias Klose <doko@ubuntu.com>
228 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
229 $(top_srcdir)/../../bfd/doc.
230 * doc/Makefile.in: Regenerate.
232 2007-08-10 Nick Clifton <nickc@redhat.com>
234 * NEWS: Add a marker for the 2.18 features.
236 2007-08-09 Paul Brook <paul@codesourcery.com>
238 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
240 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
242 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
244 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
246 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
247 DWORD memory to Reg64 in Intel synax.
248 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
249 Reg32 in Intel syntax.
251 2007-07-25 Sterling Augustine <sterling@tensilica.com>
253 * config/tc-xtensa.c (xtensa_extui_opcode): New.
254 (xg_expand_assembly_insn): Check for invalid extui operands.
255 (md_begin): Initialize xtensa_extui_opcode.
257 2007-07-24 Nick Clifton <nickc@redhat.com>
259 * config/tc-mep.h (skip_whitespace): Remove definition.
261 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
263 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
266 (f32_patt): Remove f32_15.
267 (f16_patt): Likewise.
268 (i386_align_code): Updated to alt_long_patt for 64bit by
271 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
273 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
275 * config/tc-i386.c (i386_align_code): Enable alignment up to
276 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
279 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
281 2007-07-20 Nick Clifton <nickc@redhat.com>
283 * app.c (do_scrub_chars): Provide a one character buffer to hold a
284 pushed back newline at the end of an unterminated quoted string.
286 2007-07-14 Nick Clifton <nickc@redhat.com>
288 * config/tc-arm.c (create_register_alias): Return a boolean rather
290 Check the return value of insert_reg_alias and do not continue to
291 create aliases once an insertion has failed.
292 (s_unreq): Delete the all-upper-case and all-lower-case
293 alternatives as well.
295 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
297 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
300 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
302 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
305 2007-07-04 Richard Sandiford <richard@codesourcery.com>
307 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
308 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
309 Deprecate *x and *fx.
310 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
313 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
315 * config/obj-coff.h (x86_64_target_format): Renamed to ...
316 (i386_target_format): This
317 (TARGET_FORMAT): Use i386_target_format.
319 * config/tc-i386.c (x86_64_target_format): Removed.
320 (i386_target_format): Handle PE formats.
322 2007-07-04 Nick Clifton <nickc@redhat.com>
324 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
325 to get the right length of printed value.
327 2007-07-03 Nick Clifton <nickc@redhat.com>
329 * COPYING: Replace with GPLv3 text.
330 * app.c: Update copyright notice to refer to GPLv3.
331 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
332 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
333 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
334 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
335 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
336 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
337 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
338 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
339 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
340 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
341 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
342 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
343 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
344 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
345 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
346 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
347 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
348 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
349 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
350 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
351 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
352 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
353 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
354 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
355 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
356 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
357 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
358 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
359 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
360 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
361 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
362 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
363 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
364 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
365 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
366 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
367 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
368 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
369 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
370 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
371 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
372 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
373 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
374 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
375 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
376 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
377 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
378 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
379 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
380 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
381 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
382 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
383 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
384 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
385 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
386 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
387 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
388 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
389 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
390 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
392 * flonum-mult.c: Likewise, and also correct typo referring to
393 non-existant GNU Assembler General Public License.
394 * config/tc-m68851.h: Likewise.
395 * NEWS: Mention the new license. Also note where the 2.17 release
397 * config/e-crisaout.c: Add copyright header.
398 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
399 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
400 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
401 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
402 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
403 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
404 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
405 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
406 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
407 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
408 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
409 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
410 config/te-wince-pe.h: Likewise.
412 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
414 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
415 (install_operand): Add E encoding.
416 (md_begin): Check and skip initial '.' arg character.
417 (get_num): Add 0..511 case.
419 2007-07-03 Alan Modra <amodra@bigpond.net.au>
422 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
423 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
425 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
428 * app.c (do_scrub_chars <state 5>): Check for output buffer full
431 2007-07-02 Joseph Myers <joseph@codesourcery.com>
433 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
434 s_dtprel_internal): New.
435 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
436 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
437 BFD_RELOC_MIPS_TLS_DTPREL64.
439 2007-07-02 Alan Modra <amodra@bigpond.net.au>
441 * Makefile.am: Run "make dep-am".
442 * Makefile.in: Regenerate.
443 * aclocal.m4: Regenerate.
444 * config.in: Regenerate.
445 * doc/Makefile.in: Regenerate.
446 * po/POTFILES.in: Regenerate.
447 * po/gas.pot: Regenerate.
449 2007-07-02 Alan Modra <amodra@bigpond.net.au>
451 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
452 coff section flag values to bfd section flag.
454 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
456 * aclocal.m4: Regenerated.
457 * doc/Makefile.in: Likewise.
458 * Makefile.in: Likewise.
460 2007-06-29 Joseph Myers <joseph@codesourcery.com>
462 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
464 2007-06-29 Joseph Myers <joseph@codesourcery.com>
466 * as.c (create_obj_attrs_section): New.
467 (main): Call create_obj_attrs_section for ELF.
468 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
469 skip_past_comma, s_vendor_attribute): New.
470 (potable): Add gnu_attribute for ELF.
471 * read.h (s_vendor_attribute): Declare.
472 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
473 round s_vendor_attribute.
474 (aeabi_set_public_attributes): Update for new attributes
476 (arm_md_end): Remove attributes contents setting now done
479 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
481 * Makefile.am: Add CR16 related entry.
482 * Makefile.in: Regenerate.
483 * config/tc-cr16.h: New file
484 * config/tc-cr16.c: New file
485 * doc/c-cr16.texi: New file for cr16
486 * doc/all.texi: Entry for cr16
487 * doc/Makefile.am: Added c-cr16.texi
488 * doc/Makefile.in: Regenerate
489 * doc/as.texinfo: Entry for CR16 target
490 * NEWS: Announce the support for the new target.
492 2007-06-26 Paul Brook <paul@codesourcery.com>
494 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
496 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
498 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
500 * config/tc-i386.c (process_operands): Replace regKludge
503 2007-06-25 Richard Sandiford <richard@codesourcery.com>
505 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
506 * config/tc-mips.c (append_insn): Record which symbols have
507 R_MIPS16_26 relocations against them.
508 (mips_fix_adjustable): Don't reduce relocations against such symbols.
510 2007-06-22 Sterling Augustine <sterling@tensilica.com>
512 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
513 (frag_format_size): Handle RELAX_IMMED_STEP3.
514 (xtensa_relax_frag, md_convert_frag): Likewise.
515 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
516 (RELAX_IMMED_MAXSTEPS): Adjust.
517 * config/xtensa-relax.c (widen_spec_list): Add transitions from
518 wide branches to branch-over-jumps.
519 (build_transition): Handle wide branches in transition patterns.
521 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
523 * config/tc-i386.c (disp_size): New.
524 (imm_size): Likewise.
525 (output_disp): Use disp_size and imm_size.
526 (output_imm): Use imm_size.
528 2007-06-19 Sterling Augustine <sterling@tensilica.com>
530 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
531 use of literal_frag field.
532 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
533 in the literal_frag field.
534 (xtensa_move_literals): Use it here instead of searching. Update
535 literal_frag field with new value.
537 2007-06-14 Paul Brook <paul@codesourcery.com>
539 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
540 narrow shift by immediate.
542 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
544 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
546 * acinclude.m4: Don't include m4 files.
547 (BFD_BINARY_FOPEN): Removed.
548 Remove libtool kludge.
550 * Makefile.in: Regenerated.
551 * doc/Makefile.in: Likewise.
552 * aclocal.m4: Likewise.
553 * configure: Likewise.
555 2007-06-11 Sterling Augustine <sterling@tensilica.com>
556 Bob Wilson <bob.wilson@acm.org>
558 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
559 (XTENSA_PROP_NO_TRANSFORM): ...this.
560 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
561 (xtensa_mark_frags_for_org): New.
562 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
563 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
564 (get_frag_property_flags): Adjust reference to is_no_transform flag.
565 (xtensa_frag_flags_combinable): Likewise.
566 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
567 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
569 2007-06-06 Paul Brook <paul@codesourcery.com>
571 * config/tc-arm.c (s_align): Pad code sections appropriately.
573 2007-06-05 Paul Brook <paul@codesourcery.com>
575 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
577 2007-06-05 Nick Clifton <nickc@redhat.com>
580 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
582 2007-06-05 Alan Modra <amodra@bigpond.net.au>
584 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
586 (tc_gen_reloc): Abort if neither addsy or subsy is set.
587 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
588 * config/tc-spu.h (md_operand): Handle @ppu without sym.
590 2007-05-31 Paul Brook <paul@codesourcery.com>
592 * config/tc-arm.c (insns): Allow strex on M profile cores.
594 2007-05-29 David S. Miller <davem@davemloft.net>
595 Jakub Jelinek <jakub@redhat.com>
598 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
599 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
601 2007-05-29 Alan Modra <amodra@bigpond.net.au>
603 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
605 2007-05-29 Alan Modra <amodra@bigpond.net.au>
607 * config/tc-ppc.c: Convert to ISO C.
608 * config/tc-ppc.c: Likewise.
610 2007-05-29 Alan Modra <amodra@bigpond.net.au>
612 * write.h (EXEC_MACHINE_TYPE): Delete.
613 (string_byte_count, section_alignment): Delete.
615 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
617 * app.c (do_scrub_chars): Cope with \ at end of buffer.
619 2007-05-26 Alan Modra <amodra@bigpond.net.au>
621 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
622 top 32 bits of 64 bit value if so doing results in passing
623 range check. Rewrite sign extension fudges similarly. Enable
624 fudges for powerpc64 too. Report user value if range check
625 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
626 range rather than value, also to report user value on failure.
628 2007-03-25 Paul Brook <paul@codesourcery.com>
630 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
631 (do_t_add_sub): Correctly encode subs pc, lr, #const.
632 (do_t_mov_cmp): Correctly encode movs pc, lr.
634 2007-05-24 Steve Ellcey <sje@cup.hp.com>
636 * Makefile.in: Regnerate.
637 * configure: Regenerate.
638 * aclocal.m4: Regenerate.
639 * doc/Makefile.in: Regenerate.
641 2007-05-22 Bob Wilson <bob.wilson@acm.org>
643 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
644 and index entries about automatic alignment of ENTRY instructions.
646 2007-05-22 Nick Clifton <nickc@redhat.com>
648 * doc/as.texinfo: Use @copying around the copyright notice.
650 2007-05-18 Joseph Myers <joseph@codesourcery.com>
652 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
655 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
658 2003-06-05 Michal Ludvig <mludvig@suse.cz>
659 * doc/as.texinfo: Document new directives: .cfi_restore,
660 .cfi_undefined, .cfi_same_value, .cfi_return_column,
661 .cfi_remember_state and .cfi_restore_state.
663 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
665 * config/tc-m68k.c (md_apply_fix): Show value of out of range
666 fixups in error message.
667 (md_conver_frag_1): Propagate the fix source location and use
668 as_bad_where rather than fatal, for better error messages.
670 2007-05-16 Paul Brook <paul@codesourcery.com>
672 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
674 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
676 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
678 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
681 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
682 addend is stored for relocs against weak symbols.
683 (md_apply_fix): So not loose track of addend for relocs against
686 2007-05-14 Thiemo Seufer <ths@mips.com>
688 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
690 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
692 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
693 addri, addri.c, subi, and subi.c when immediate number is hex.
694 (score_insns): Remove subis and subis.c.
695 (do_sub_rdi16): Delete.
697 2007-05-11 Alan Modra <amodra@bigpond.net.au>
699 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
701 (md_assemble): Tidy use of insn.flag.
702 (get_imm): Likewise. Handle uppercase input too.
703 (spu_cons): New function.
704 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
705 (TC_FORCE_RELOCATION): Don't resolve them either.
707 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
709 * config/tc-arm.c (md_apply_fix): Generate more accurate
710 diagnostic when 8-bit immediate range is exceeded for
711 BFD_RELOC_ARM_OFFSET_IMM8.
713 2007-05-04 Alan Modra <amodra@bigpond.net.au>
716 * config/tc-i386.c (lex_got): Don't replace the reloc token with
717 a space if we already have a space.
719 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
721 * config/tc-i386.c (match_template): Don't explicitly check
722 suffix for crc32 in Intel mode.
723 (process_suffix): Issue an error for crc32 if the operand size
726 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
727 Nick Clifton <nickc@redhat.com>
730 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
731 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
732 (md_apply_fix): Put zero values into the frags referencing weak
735 2007-05-02 Alan Modra <amodra@bigpond.net.au>
738 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
741 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
743 * config/tc-i386.c (match_template): Check suffix for crc32 in
745 (process_suffix): Default the suffix of 8bit crc32 to
747 (check_byte_reg): Skip check for 8bit crc32.
749 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
751 * config/tc-i386.c (md_assemble): Use register_prefix in
752 error/warning message.
753 (check_byte_reg): Likewise.
754 (check_long_reg): Likewise.
755 (check_qword_reg): Likewise.
756 (check_word_reg): Likewise.
757 (process_operands): Likewise.
759 2007-04-30 Alan Modra <amodra@bigpond.net.au>
762 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
765 2007-04-28 Thiemo Seufer <ths@networkno.de>
767 * config/tc-mips.c: Fix comment.
769 2007-04-26 Anatoly Sokolov <aesok@post.ru>
771 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
772 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
773 * doc/c-avr.texi: Document new devices.
775 2007-04-24 Alan Modra <amodra@bigpond.net.au>
777 * Makefile.am: Run "make dep-am".
778 * Makefile.in: Regenerate.
780 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
782 * config/tc-m68k.c (mcf54455_ctrl): New.
783 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
784 (m68k_archs): Add isac.
785 (m68k_cpus): Add 54455 family.
786 (m68k_ip): Split Bg into Bb, Bs, Bg.
787 (m68k_elf_final_processing): Add ISA_C.
788 * doc/c-m68k.texi (M680x0 Options): Add isac.
790 2007-04-22 Alan Modra <amodra@bigpond.net.au>
792 * read.c (read_a_source_file): Skip multiple spaces to
793 cover hack in mmix md_start_line_hook which overwrites a
794 colon with a space. Delete sermon and needless assertion.
796 2007-04-21 Alan Modra <amodra@bigpond.net.au>
798 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
799 (md_atof): Make number_of_chars unsigned. Revert last change.
800 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
801 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
802 * config/tc-sh.h (md_optimize_expr): Likewise.
803 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
805 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
807 2007-04-21 Nick Clifton <nickc@redhat.com>
809 * config/atof-vax.c (md_atof): Fix comparison inside know().
811 * config/tc-ia64.c (emit_one_bundle): Fix typo.
813 2007-04-21 Alan Modra <amodra@bigpond.net.au>
815 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
816 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
817 Don't skip over NUL char.
818 (pseudo_set): Set X_op for registers to O_register.
819 * symbols.c (symbol_clone): Remove assertion that sym is defined.
820 (resolve_symbol_value): Resolve O_register symbols.
821 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
822 Instead find st(0) by hash lookup.
823 * config/tc-ppc.c (ppc_macro): Warning fix.
825 * as.h (ENABLE_CHECKING): Default define to 0.
826 (know): Assert if ENABLE_CHECKING.
827 (struct relax_type): Remove superfluous declaration.
828 * configure.in (--enable-checking): New.
829 * configure: Regenerate.
830 * config.in: Regenerate.
831 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
832 Check for duplicate powerpc_operands entries.
834 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
836 * config/tc-m68k.c (mcf5253_ctrl): New.
837 (mcf52223_ctrl): New.
838 (m68k_cpus): Add 5253, 52221, 52223.
840 * config/m68k-parse.h (RAMBAR_ALT): New.
841 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
842 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
843 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
844 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
845 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
847 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
848 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
849 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
850 to control register mapping.
852 2007-04-20 Alan Modra <amodra@bigpond.net.au>
854 * messages.c (as_internal_value_out_of_range): Fix typo in
855 error message. Return after printing domain error.
856 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
857 in max when shifting right.
859 2007-04-20 Alan Modra <amodra@bigpond.net.au>
861 * messages.c (as_internal_value_out_of_range): Extend to report
862 errors for values with invalid low bits set.
863 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
864 fields. Check that operands and opcode fields are disjoint.
865 (ppc_insert_operand): Check operands using mask rather than bit
866 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
868 (md_apply_fix): Adjust for struct powerpc_operand change.
870 2007-04-19 Paul Brook <paul@codesourcery.com>
872 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
873 Thumb-1. Add sanity check for bogus relaxations.
875 2007-04-19 Paul Brook <paul@codesourcery.com>
877 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
879 2007-04-19 Alan Modra <amodra@bigpond.net.au>
881 * Makefile.am: Run "make dep-am".
882 * Makefile.in: Regenerate.
884 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
886 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
888 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
890 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
892 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
894 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
895 (match_template): Handle operand size for crc32 in SSE4.2.
896 (process_suffix): Handle operand type for crc32 in SSE4.2.
897 (output_insn): Support SSE4.2.
899 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
901 * config/tc-i386.c (cpu_arch): Add .sse4.1.
902 (process_operands): Adjust implicit operand for blendvpd,
903 blendvps and pblendvb in SSE4.1.
904 (output_insn): Support SSE4.1.
906 2007-04-18 Paul Brook <paul@codesourcery.com>
908 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
910 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
912 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
913 of as_warn_where for misaligned data.
915 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
917 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
920 2007-04-14 Steve Ellcey <sje@cup.hp.com>
922 * Makefile.am: Add ACLOCAL_AMFLAGS.
923 * Makefile.in: Regenerate.
925 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
927 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
928 (sh_optimize_expr): Likewise.
929 * config/tc-sh.h (md_optimize_expr): Define.
930 (sh_optimize_expr): Prototype.
932 2007-04-06 Matt Thomas <matt@netbsd.org>
934 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
935 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
936 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
938 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
940 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
942 2007-04-04 Paul Brook <paul@codesourcery.com>
944 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
945 (insns): Use I15 for vext.
947 2007-04-04 Paul Brook <paul@codesourcery.com>
949 * configure.tgt: Loosen checks for arm uclinux eabi targets.
951 2007-04-02 Sterling Augustine <sterling@tensilica.com>
953 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
954 outputting_stabs_line_debug.
956 2007-03-26 Anatoly Sokolov <aesok@post.ru>
958 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
959 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
961 * doc/c-avr.texi: Document new devices.
963 2007-04-02 Richard Sandiford <richard@codesourcery.com>
965 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
966 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
967 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
969 2007-03-30 Sterling Augustine <sterling@tensilica.com>
970 Bob Wilson <bob.wilson@acm.org>
972 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
973 Do not check is_loop_target flag.
974 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
975 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
976 xtensa_move_labels for alignment of loop opcodes.
978 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
980 * config/tc-i386.c (process_suffix): Reindent a bit.
982 2007-03-30 Paul Brook <paul@codesourcery.com>
984 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
985 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
986 (do_t_push_pop): Use encode_thumb2_ldmstm.
988 2007-03-29 DJ Delorie <dj@redhat.com>
990 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
991 (md_relax_table): Add entries for ADJNZ macros.
992 (M32C_Macros): Add ADJNZ macros.
993 (subtype_mappings): Add entries for ADJNZ macros.
994 (insn_to_subtype): Check for adjnz and sbjnz insns.
995 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
996 (md_convert_frag): Convert adjnz and sbjnz.
998 2007-03-29 Nick Clifton <nickc@redhat.com>
1000 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1002 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1003 using ITBL_NUMBER_OF_PROCESSORS.
1004 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1006 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1008 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1009 register operands, encode destination in i.rm.regmem if its
1012 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1013 Phil Edwards <phil@codesourcery.com>
1015 * doc/as.texinfo: Put the contents after the title page rather
1016 than at the end of the document.
1018 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1020 * NEWS: Mention ".reloc".
1022 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1024 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1025 in FLIX instructions.
1027 2007-03-26 Julian Brown <julian@codesourcery.com>
1029 * config/tc-arm.c (arm_it): Add immisfloat field.
1030 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1031 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1032 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1034 (neon_cmode_for_move_imm): Reject non-float immediates for float
1036 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1038 2007-03-26 Julian Brown <julian@codesourcery.com>
1040 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1042 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1044 * doc/as.texinfo (Reloc): Document.
1045 * read.c (potable): Add "reloc".
1046 (s_reloc): New function.
1047 * write.c (reloc_list): New global var.
1048 (resolve_reloc_expr_symbols): New function.
1049 (write_object_file): Call it.
1050 (write_relocs): Process reloc_list.
1051 * write.h (struct reloc_list): New.
1052 (reloc_list): Declare.
1054 2007-03-24 Paul Brook <paul@codesourcery.com>
1056 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1058 2007-03-24 Paul Brook <paul@codesourcery.com>
1059 Mark Shinwell <shinwell@codesourcery.com>
1061 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1062 (parse_operands): Don't expect comma if first operand missing.
1064 (do_srs): Encode register number, checking it is r13. Update comment.
1065 (insns): Update SRS entries to take a register.
1067 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1069 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1071 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1073 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1074 attempt to jump to the next instruction into NOPs.
1076 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1078 * config/tc-spu.c: Don't include opcode/spu.h.
1079 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1080 (md_apply_fix): Adjust.
1081 * config/tc-spu.h: Include opcode/spu.h.
1082 (struct tc_fix_info): New.
1083 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1084 (TC_FORCE_RELOCATION): Define.
1086 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1088 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1090 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1092 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1093 xchg for xchg %rax,%rax.
1095 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1097 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1098 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1100 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1103 * config/tc-i386.c (match_template): Properly handle 64bit mode
1106 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1109 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1111 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1113 * Makefile.am: Run dep-am.
1114 * Makefile.in: Regenerated.
1116 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1118 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1119 (NOP_OPCODE): Removed.
1120 (template): Likewise.
1122 2007-03-21 Andreas Schwab <schwab@suse.de>
1124 * config/tc-i386.h (NOP_OPCODE): Restore.
1126 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1128 * config/tc-arm.c (do_mul): Don't warn about overlapping
1129 Rd and Rm operands when assembling for v6 or above.
1130 Correctly capitalize register names in the messages.
1131 (do_mlas): Likewise. Delete spurious blank line.
1133 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1135 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1137 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1139 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1141 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1144 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1147 * app.c (do_scrub_chars): PUT after setting states.
1149 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1151 * Makefile.am: Run "make dep-am".
1152 * Makefile.in: Regenerated.
1154 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1156 (md_begin): Check reg_name != NULL for the last entry in
1159 * config/tc-i386.h: Move many entries to opcode/i386.h and
1162 * configure.in (need_opcodes): Set true for i386.
1163 * configure: Regenerated.
1165 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1167 * Makefile.am (REPORT_BUGS_TO): Removed.
1168 (INCLUDES): Remove -DREPORT_BUGS_TO.
1169 * Makefile.in: Regenerated.
1171 * configure.in (--with-bugurl): Removed.
1172 * configure: Regenerated.
1174 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1175 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1176 (TEXI2DVI): Likewise.
1177 (gasver.texi): Removed.
1178 (MOSTLYCLEANFILES): Remove gasver.texi.
1179 (as.1): Don't depend on gasver.texi.
1180 * doc/Makefile.in: Regenerated.
1182 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1184 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1186 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1187 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1188 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1189 * gas/symbols.c (copy_symbol_attributes): Use
1190 TC_COPY_SYMBOL_ATTRIBUTES.
1192 2007-03-14 Paul Brook <paul@codesourcery.com>
1194 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1196 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1199 * write.c (relax_segment): Insert extra alignment padding
1200 to break infinite relax loop when given impossible
1201 gcc_except_table assembly.
1203 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1205 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1206 on i.tm.base_opcode.
1207 (match_template): Likewise.
1208 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1210 * config/tc-i386.h (Opcode_D): New.
1211 (Opcode_FloatR): Likewise.
1212 (Opcode_FloatD): Likewise.
1215 (FloatMF): Likewise.
1219 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1221 * app.c (do_scrub_chars): Recognize comments after # line "file".
1222 * read.c (get_linefile_number): New.
1223 (s_app_line): Accept ill-formed .linefile lines as comments.
1225 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1227 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1229 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1231 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1232 * as.h (new_logical_line_flags): New.
1233 * input-scrub.c (new_logical_line): Turned into wrapper for...
1234 (new_logical_line_flags): this. Handle flags.
1235 * read.c (potable): Add linefile. Adjust appline argument.
1236 (s_app_file): Fake .appfiles no more.
1237 (s_app_line): For .linefile, accept file name and flags.
1239 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1241 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1243 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1245 * Makefile.am: Run "make dep-am".
1246 * Makefile.in: Regenerate.
1247 * po/POTFILES.in: Regenerate.
1249 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1251 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1253 * doc/Makefile.am (gasver.texi): Define BUGURL.
1254 * doc/as.texinfo: Use BUGURL.
1255 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1257 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1259 * config/tc-s390.c (md_parse_option): z9-ec option added.
1261 2007-03-02 Paul Brook <paul@codesourcery.com>
1263 * config/tc-arm.c (relax_immediate): Always return positive values.
1264 (relaxed_symbol_addr): New function.
1265 (relax_adr, relax_branch): Use it.
1266 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1268 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1270 * as.c (parse_args): Update copyright date.
1272 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1274 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1276 2007-02-28 Nick Clifton <nickc@redhat.com>
1279 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1280 just return -1 whenever a problem is encountered.
1281 (md_assemble): If do_assemble returns -1 generate a non-fatal
1282 error message and return.
1285 * config/tc-msp430.c (line_separator_char): Change to '{'.
1287 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1289 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1290 (build_jump_insn): Likewise.
1291 (build_insn): Likewise.
1292 (s_m68hc11_relax): Likewise.
1294 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1296 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1298 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1300 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1302 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1304 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1305 (md_assemble): Likewise.
1307 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1309 * write.c (size_seg): Always clear SEC_RELOC here.
1310 (install_reloc): New function, extracted from..
1311 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1312 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1313 testing frag size. Set SEC_RELOC here.
1315 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1318 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1320 2007-02-20 Thiemo Seufer <ths@mips.com>
1322 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1324 2007-02-20 Thiemo Seufer <ths@mips.com>
1326 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1328 2007-02-20 Thiemo Seufer <ths@mips.com>
1329 Chao-Ying Fu <fu@mips.com>
1331 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1332 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1333 (macro_build): Add case '2'.
1334 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1335 (validate_mips_insn): Add support for balign instruction.
1336 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1337 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1338 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1339 command line options.
1340 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1341 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1342 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1343 .set dspr2, .set nodspr2.
1345 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1347 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1348 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1350 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1352 * write.c (TC_FX_SIZE_SLACK): Define.
1353 (write_relocs): Reinstate check for fixup within frag.
1354 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1355 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1356 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1357 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1358 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1360 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1361 Nathan Sidwell <nathan@codesourcery.com>
1362 Vladimir Prus <vladimir@codesourcery.com
1363 Joseph Myers <joseph@codesourcery.com>
1365 * configure.in (--with-bugurl): New option.
1366 * configure: Regenerate.
1367 * dep-in.sed: Remove bin-bugs.h.
1368 * Makefile.am (REPORT_BUGS_TO): Define.
1369 (INCLUDES): Define REPORT_BUGS_TO.
1370 (DEP_INCLUDES): Likewise.
1371 ($(OBJS)): No longer depend on bin-bugs.h.
1372 * Makefile.in: Regenerate.
1373 * doc/Makefile.in: Regenerate.
1374 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1375 * as.h: Remove include of bin-bugs.h.
1377 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1379 * write.c: White space fixes.
1380 (fixup_segment): Move symbol_mri_common_p adjustments..
1381 (write_relocs): ..and symbol_equated_reloc_p adjustments..
1382 (adjust_reloc_syms): ..to here.
1384 2007-02-16 Alan Modra <amodra@bigpond.net.au>
1386 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1387 xmalloc, memset. Don't bother assigning NULL to known zero mem.
1388 (subseg_set_rest): Remove unnecessary cast.
1389 * write.c: Include libbfd.h. Replace PTR with void * throughout.
1390 Remove unnecessary forward declarations and casts.
1391 (set_symtab): Delete extern bfd_alloc.
1392 (fixup_segment): Move.
1394 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
1396 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1397 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1398 (mcf5475_ctrl, mcf5485_ctrl): New.
1399 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1400 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1401 (init_table): Add asid, mmubar, adjust rombar0.
1403 2007-02-14 Alan Modra <amodra@bigpond.net.au>
1405 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1406 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1407 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1408 code, and test for these insns using a combination of
1409 opcode_modifier and operand_types.
1411 2007-02-07 Paul Brook <paul@codesourcery.com>
1413 * configure.tgt: Add arm*-*-uclinux-*eabi.
1415 2007-02-05 Dave Brolley <brolley@redhat.com>
1416 Richard Sandiford <rsandifo@redhat.com>
1417 DJ Delorie <dj@redhat.com>
1418 Stan Cox <scox@redhat.com>
1419 Jim Blandy <jimb@redhat.com>
1420 Nick Clifton <nickc@redhat.com>
1421 Jim Wilson <wilson@redhat.com>
1422 Frank Ch. Eigler <fche@redhat.com>
1423 Graydon Hoare <graydon@redhat.com>
1424 Ben Elliston <bje@redhat.com>
1425 John Healy <jhealy@redhat.com>
1426 Richard Henderson <rth@redhat.com>
1428 * Makefile.am (CPU_TYPES): Add mep.
1429 (TARGET_CPU_CFILES): Add tc-mep.c.
1430 (TARGET_CPU_HFILES): Add tc-mep.h.
1431 (DEPTC_mep_elf): New variable.
1432 (DEPTC_mep_coff): Likewise.
1433 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1434 * configure.in: Support mep.
1435 * configure.tgt: Likewise.
1436 * config/tc-mep.c: New file.
1437 * config/obj-elf.c: New file.
1438 * config/tc-mep.c: New file.
1439 * config/tc-mep.h: New file.
1440 * testsuite/gas/mep: New testsuite with content.
1441 * Makefile.in: Regenerate.
1442 * configure: Regenerate.
1444 2007-02-05 Dave Brolley <brolley@redhat.com>
1446 * cgen.c (gas_cgen_install_complex_reloc): Removed.
1447 (complex_reloc_installation_howto): Removed.
1449 2007-02-05 Dave Brolley <brolley@redhat.com>
1450 Graydon Hoare <graydon@redhat.com>
1451 DJ Delorie <dj@redhat.com>
1452 Catherine Moore <clm@redhat.com>
1453 Michael Chastain <chastain@redhat.com>
1454 Frank Ch. Eigler <fche@redhat.com>
1456 * symbols.c (use_complex_relocs_for): New, to decide
1457 when to use complex relocs. Add signed RELC support.
1458 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1459 encode expression symbols as mangled complex relocation symbols (when
1460 compiled with -DOBJ_COMPLEX_RELOC).
1461 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1462 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
1463 encode_addend with new args. Modify to get start, length from
1464 ifield whenever it is set. Also change condition on which
1465 self-describing relocs are encoded. Add hook into
1466 gas_cgen_encode_addend.
1467 (queue_fixup_recursively): Add signed RELC support. Change from masked
1468 expr to trunc flag. Restore assignment of sub-field value to
1469 temporary in fixups array. Reflect changed meaning of last arg to
1470 queue_fixup_recursively.
1471 (fixup): Add cgen_maybe_multi_ifield member.
1472 (make_right_shifted_expr): New function.
1473 (queue_fixup): Change to recursive function that fragments
1474 fixups if operand has a multi-ifield.
1475 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1476 symbols, call weak_operand_overflow_check, and fragment call
1477 queue_fixup with operand fields.
1478 (gas_cgen_finish_insn) Modify to manage ifield pointer.
1479 (weak_operand_overflow_check): New function to try to select
1481 (gas_cgen_encode_addend): New function for relc.
1482 (gas_cgen_install_complex_reloc): Likewise.
1483 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1484 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1485 cgen_maybe_multi_ifield field to fx_cgen substructure.
1486 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1487 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1489 2007-02-03 DJ Delorie <dj@delorie.com>
1491 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
1493 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1494 (m32c_cons_fix_new): Prototype.
1496 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1498 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1499 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1501 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1503 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1504 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1505 (map_suffix_reloc_to_operator): New.
1506 (map_operator_to_reloc): New.
1507 (expression_maybe_register): Fix incorrect test of return value from
1508 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
1509 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1511 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1513 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1514 (tinsn_get_tok): Delete prototype.
1515 * config/tc-xtensa.c (tinsn_get_tok): Delete.
1517 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1519 * config/xtensa-relax.h (struct build_instr): Delete id field.
1520 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1522 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1523 set op_data fields to zero.
1524 (parse_id_constant): Delete.
1525 (build_transition): Remove code to handle numbered literals and labels.
1527 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1529 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1530 (build_transition_table): Likewise.
1532 2007-02-01 Bob Wilson <bob.wilson@acm.org>
1534 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1536 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1538 2007-02-02 Alan Modra <amodra@bigpond.net.au>
1540 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1541 (struct fix <fx_plt>): Rename to tcbit2.
1542 * write.c (fix_new_internal): Adjust.
1543 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1544 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1545 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1546 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1547 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1548 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1549 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1550 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1551 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1552 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1553 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1554 Instead, compare fx_r_type.
1555 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1556 fx_tcbit in place of fx_plt.
1557 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1558 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1561 2007-01-30 Nick Clifton <nickc@redhat.com>
1563 * as.c (main): Mark symbols created via the --defsym command line
1564 option as volatile so that they can be overridden later on by a
1565 .set directive. This maintains compatibility with the behaviour
1566 of earlier versions of the assembler.
1567 * doc/as.texinfo (--defsym): Document that the defined symbol's
1568 value can be overridden via a .set directive.
1570 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
1572 * config/tc-i386.c (swap_imm_operands): Renamed to ...
1573 (swap_2_operands): This. Take 2 ints.
1574 (md_assemble): Updated.
1575 (swap_operands): Call swap_2_operands to swap 2 operands.
1577 2007-01-24 DJ Delorie <dj@redhat.com>
1579 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1581 2007-01-22 Nick Clifton <nickc@redhat.com>
1584 * tc-score.c: Remove unnecessary uses of _().
1585 Make the err_msg[] a file level local array in order to save
1587 Remove unnecessary sprintf()s.
1589 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
1592 * config/tc-score.c : Using _() for const string.
1593 Do not assign inst.error with a local string pointer.
1594 (md_section_align): Pad section.
1596 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
1598 * config/tc-i386.c (build_modrm_byte): Check number of operands
1599 when procssing memory/register operand.
1601 2007-01-12 Nick Clifton <nickc@redhat.com>
1604 * macro.c (expand_irp): Do not ignore spaces inside quoted
1607 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1609 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1610 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1611 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1612 (TC_FORCE_RELOCATION): Define.
1613 (TC_FORCE_RELOCATION_LOCAL): Define.
1614 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1616 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1618 * input-file.c (input_file_open): Check fgets return.
1620 2007-01-11 Paul Brook <paul@codesourcery.com>
1622 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1624 2007-01-11 Nick Clifton <nickc@redhat.com>
1627 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1630 * config/tc-mcore.c (md_number_to_chars): Use
1631 number_to_chars_{big|little}endian.
1633 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
1635 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1636 architecture by itself.
1637 (m68k_ip): Don't issue a warning for tbl instructions on fido.
1638 (m68k_elf_final_processing): Treat Fido as an architecture by
1641 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
1643 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1645 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
1647 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1648 depending on allow_naked_reg.
1650 2007-01-04 Paul Brook <paul@codesourcery.com>
1652 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1654 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
1657 * config/tc-i386.c (register_prefix): New.
1658 (set_intel_syntax): Set set_intel_syntax to "" if register
1659 prefix isn't needed.
1660 (check_byte_reg): Use register_prefix for error message.
1661 (check_long_reg): Likewise.
1662 (check_qword_reg): Likewise.
1663 (check_word_reg): Likewise.
1665 2007-01-04 Julian Brown <julian@codesourcery.com>
1667 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1668 (do_neon_qshl_imm): Likewise.
1669 (do_neon_rshl): New function. Handle rounding variants of
1670 v{q}shl-by-register.
1671 (insns): Use do_neon_rshl for vrshl, vqrshl.
1673 2007-01-04 Paul Brook <paul@codesourcery.com>
1675 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1678 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1680 * config/tc-i386.c (swap_operands): Remove branches.
1682 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1684 * config/tc-i386.c: Update copyright year.
1685 * config/tc-i386.h: Likewise.
1687 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1689 * config/tc-i386.c (smallest_imm_type): Return unsigned int
1692 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1694 * config/tc-i386.c: Convert to ISO C90 formatting
1695 * config/tc-i386.h: Likewise.
1697 2007-01-03 David Daney <ddaney@avtrex.com>
1699 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
1702 For older changes see ChangeLog-2006
1708 version-control: never