gas/ChangeLog

   1 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         PR gas/4517
   4         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
   5         * doc/as.texinfo: Document new directives: .cfi_restore,
   6         .cfi_undefined, .cfi_same_value, .cfi_return_column,
   7         .cfi_remember_state and .cfi_restore_state.
   8
   9 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
  10
  11         * config/tc-m68k.c (md_apply_fix): Show value of out of range
  12         fixups in error message.
  13         (md_conver_frag_1): Propagate the fix source location and use
  14         as_bad_where rather than fatal, for better error messages.
  15
  16 2007-05-16  Paul Brook  <paul@codesourcery.com>
  17
  18         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
  19
  20 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
  21
  22         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
  23
  24 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
  25
  26         PR gas/3041
  27         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
  28         addend is stored for relocs against weak symbols.
  29         (md_apply_fix): So not loose track of addend for relocs against
  30         weak symbols.
  31
  32 2007-05-14  Thiemo Seufer  <ths@mips.com>
  33
  34         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
  35
  36 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
  37
  38         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
  39         addri, addri.c, subi, and subi.c when immediate number is hex.
  40         (score_insns): Remove subis and subis.c.
  41         (do_sub_rdi16): Delete.
  42
  43 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
  44
  45         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
  46         spu_cons for word.
  47         (md_assemble): Tidy use of insn.flag.
  48         (get_imm): Likewise.  Handle uppercase input too.
  49         (spu_cons): New function.
  50         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
  51         (TC_FORCE_RELOCATION): Don't resolve them either.
  52
  53 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
  54
  55         * config/tc-arm.c (md_apply_fix): Generate more accurate
  56         diagnostic when 8-bit immediate range is exceeded for
  57         BFD_RELOC_ARM_OFFSET_IMM8.
  58
  59 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
  60
  61         PR gas/4460
  62         * config/tc-i386.c (lex_got): Don't replace the reloc token with
  63         a space if we already have a space.
  64
  65 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
  66
  67         * config/tc-i386.c (match_template): Don't explicitly check
  68         suffix for crc32 in Intel mode.
  69         (process_suffix): Issue an error for crc32 if the operand size
  70         is ambiguous.
  71
  72 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
  73             Nick Clifton  <nickc@redhat.com>
  74
  75         PR gas/3041
  76         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
  77         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
  78         (md_apply_fix): Put zero values into the frags referencing weak
  79         symbols.
  80
  81 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
  82
  83         PR 4448
  84         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
  85         PPC_OPERAND_PLUS1.
  86
  87 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
  88
  89         * config/tc-i386.c (match_template): Check suffix for crc32 in
  90         Intel mdoe.
  91         (process_suffix): Default the suffix of 8bit crc32 to
  92         BYTE_MNEM_SUFFIX.
  93         (check_byte_reg): Skip check for 8bit crc32.
  94
  95 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
  96
  97         * config/tc-i386.c (md_assemble): Use register_prefix in
  98         error/warning message.
  99         (check_byte_reg): Likewise.
 100         (check_long_reg): Likewise.
 101         (check_qword_reg): Likewise.
 102         (check_word_reg): Likewise.
 103         (process_operands): Likewise.
 104
 105 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
 106
 107         PR 4436
 108         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
 109         min > max.
 110
 111 2007-04-28  Thiemo Seufer  <ths@networkno.de>
 112
 113         * config/tc-mips.c: Fix comment.
 114
 115 2007-04-26  Anatoly Sokolov <aesok@post.ru>
 116
 117         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
 118         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
 119         * doc/c-avr.texi: Document new devices.
 120
 121 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
 122
 123         * Makefile.am: Run "make dep-am".
 124         * Makefile.in: Regenerate.
 125
 126 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
 127
 128         * config/tc-m68k.c (mcf54455_ctrl): New.
 129         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
 130         (m68k_archs): Add isac.
 131         (m68k_cpus): Add 54455 family.
 132         (m68k_ip): Split Bg into Bb, Bs, Bg.
 133         (m68k_elf_final_processing): Add ISA_C.
 134         * doc/c-m68k.texi (M680x0 Options): Add isac.
 135
 136 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
 137
 138         * read.c (read_a_source_file): Skip multiple spaces to
 139         cover hack in mmix md_start_line_hook which overwrites a
 140         colon with a space.  Delete sermon and needless assertion.
 141
 142 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
 143
 144         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
 145         (md_atof): Make number_of_chars unsigned.  Revert last change.
 146         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
 147         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
 148         * config/tc-sh.h (md_optimize_expr): Likewise.
 149         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
 150         assertion.
 151         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
 152
 153 2007-04-21  Nick Clifton  <nickc@redhat.com>
 154
 155         * config/atof-vax.c (md_atof): Fix comparison inside know().
 156
 157         * config/tc-ia64.c (emit_one_bundle): Fix typo.
 158
 159 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
 160
 161         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
 162         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
 163         Don't skip over NUL char.
 164         (pseudo_set): Set X_op for registers to O_register.
 165         * symbols.c (symbol_clone): Remove assertion that sym is defined.
 166         (resolve_symbol_value): Resolve O_register symbols.
 167         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
 168         Instead find st(0) by hash lookup.
 169         * config/tc-ppc.c (ppc_macro): Warning fix.
 170
 171         * as.h (ENABLE_CHECKING): Default define to 0.
 172         (know): Assert if ENABLE_CHECKING.
 173         (struct relax_type): Remove superfluous declaration.
 174         * configure.in (--enable-checking): New.
 175         * configure: Regenerate.
 176         * config.in: Regenerate.
 177         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
 178         Check for duplicate powerpc_operands entries.
 179
 180 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
 181
 182         * config/tc-m68k.c (mcf5253_ctrl): New.
 183         (mcf52223_ctrl): New.
 184         (m68k_cpus): Add 5253, 52221, 52223.
 185
 186         * config/m68k-parse.h (RAMBAR_ALT): New.
 187         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
 188         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
 189         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
 190         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
 191         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
 192         RAMBAR1.
 193         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
 194         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
 195         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
 196         to control register mapping.
 197
 198 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
 199
 200         * messages.c (as_internal_value_out_of_range): Fix typo in
 201         error message.  Return after printing domain error.
 202         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
 203         in max when shifting right.
 204
 205 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
 206
 207         * messages.c (as_internal_value_out_of_range): Extend to report
 208         errors for values with invalid low bits set.
 209         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
 210         fields.  Check that operands and opcode fields are disjoint.
 211         (ppc_insert_operand): Check operands using mask rather than bit
 212         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
 213         insertion code.
 214         (md_apply_fix): Adjust for struct powerpc_operand change.
 215
 216 2007-04-19  Paul Brook  <paul@codesourcery.com>
 217
 218         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
 219         Thumb-1.  Add sanity check for bogus relaxations.
 220
 221 2007-04-19  Paul Brook  <paul@codesourcery.com>
 222
 223         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
 224
 225 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
 226
 227         * Makefile.am: Run "make dep-am".
 228         * Makefile.in: Regenerate.
 229
 230 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
 231
 232         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
 233
 234 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 235
 236         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
 237
 238 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 239
 240         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
 241         (match_template): Handle operand size for crc32 in SSE4.2.
 242         (process_suffix): Handle operand type for crc32 in SSE4.2.
 243         (output_insn): Support SSE4.2.
 244
 245 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 246
 247         * config/tc-i386.c (cpu_arch): Add .sse4.1.
 248         (process_operands): Adjust implicit operand for blendvpd,
 249         blendvps and pblendvb in SSE4.1.
 250         (output_insn): Support SSE4.1.
 251
 252 2007-04-18  Paul Brook  <paul@codesourcery.com>
 253
 254         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
 255
 256 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 257
 258         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
 259         of as_warn_where for misaligned data.
 260
 261 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 262
 263         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
 264         rs_fill frags.
 265
 266 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
 267
 268         * Makefile.am: Add ACLOCAL_AMFLAGS.
 269         * Makefile.in: Regenerate.
 270
 271 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 272
 273         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
 274         (sh_optimize_expr): Likewise.
 275         * config/tc-sh.h (md_optimize_expr): Define.
 276         (sh_optimize_expr): Prototype.
 277
 278 2007-04-06  Matt Thomas  <matt@netbsd.org>
 279
 280         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
 281         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
 282         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
 283
 284 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
 285
 286         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
 287
 288 2007-04-04  Paul Brook  <paul@codesourcery.com>
 289
 290         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
 291         (insns): Use I15 for vext.
 292
 293 2007-04-04  Paul Brook  <paul@codesourcery.com>
 294
 295         * configure.tgt: Loosen checks for arm uclinux eabi targets.
 296
 297 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
 298
 299         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
 300         outputting_stabs_line_debug.
 301
 302 2007-03-26  Anatoly Sokolov <aesok@post.ru>
 303
 304         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
 305         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
 306         devices.
 307         * doc/c-avr.texi: Document new devices.
 308
 309 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
 310
 311         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
 312         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
 313         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
 314
 315 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
 316             Bob Wilson  <bob.wilson@acm.org>
 317
 318         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
 319         Do not check is_loop_target flag.
 320         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
 321         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
 322         xtensa_move_labels for alignment of loop opcodes.
 323
 324 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
 325
 326         * config/tc-i386.c (process_suffix): Reindent a bit.
 327
 328 2007-03-30  Paul Brook  <paul@codesourcery.com>
 329
 330         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
 331         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
 332         (do_t_push_pop):  Use encode_thumb2_ldmstm.
 333
 334 2007-03-29  DJ Delorie  <dj@redhat.com>
 335
 336         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
 337         (md_relax_table): Add entries for ADJNZ macros.
 338         (M32C_Macros): Add ADJNZ macros.
 339         (subtype_mappings): Add entries for ADJNZ macros.
 340         (insn_to_subtype): Check for adjnz and sbjnz insns.
 341         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
 342         (md_convert_frag): Convert adjnz and sbjnz.
 343
 344 2007-03-29  Nick Clifton  <nickc@redhat.com>
 345
 346         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
 347         initialization.
 348         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
 349         using ITBL_NUMBER_OF_PROCESSORS.
 350         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
 351
 352 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
 353
 354         * config/tc-i386.c (build_modrm_byte): For instructions with 2
 355         register operands, encode destination in i.rm.regmem if its
 356         RegMem bit is set.
 357
 358 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
 359             Phil Edwards  <phil@codesourcery.com>
 360
 361         * doc/as.texinfo: Put the contents after the title page rather
 362         than at the end of the document.
 363
 364 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
 365
 366         * NEWS: Mention ".reloc".
 367
 368 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
 369
 370         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
 371         in FLIX instructions.
 372
 373 2007-03-26  Julian Brown  <julian@codesourcery.com>
 374
 375         * config/tc-arm.c (arm_it): Add immisfloat field.
 376         (parse_qfloat_immediate): Disallow integer syntax for floating-point
 377         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
 378         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
 379         float.
 380         (neon_cmode_for_move_imm): Reject non-float immediates for float
 381         operands.
 382         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
 383
 384 2007-03-26  Julian Brown  <julian@codesourcery.com>
 385
 386         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
 387
 388 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
 389
 390         * doc/as.texinfo (Reloc): Document.
 391         * read.c (potable): Add "reloc".
 392         (s_reloc): New function.
 393         * write.c (reloc_list): New global var.
 394         (resolve_reloc_expr_symbols): New function.
 395         (write_object_file): Call it.
 396         (write_relocs): Process reloc_list.
 397         * write.h (struct reloc_list): New.
 398         (reloc_list): Declare.
 399
 400 2007-03-24  Paul Brook  <paul@codesourcery.com>
 401
 402         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
 403
 404 2007-03-24  Paul Brook  <paul@codesourcery.com>
 405         Mark Shinwell  <shinwell@codesourcery.com>
 406
 407         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
 408         (parse_operands): Don't expect comma if first operand missing.
 409         Handle OP_oRRw.
 410         (do_srs): Encode register number, checking it is r13.  Update comment.
 411         (insns): Update SRS entries to take a register.
 412
 413 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
 414
 415         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
 416
 417 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
 418
 419         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
 420         attempt to jump to the next instruction into NOPs.
 421
 422 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
 423
 424         * config/tc-spu.c: Don't include opcode/spu.h.
 425         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
 426         (md_apply_fix): Adjust.
 427         * config/tc-spu.h: Include opcode/spu.h.
 428         (struct tc_fix_info): New.
 429         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
 430         (TC_FORCE_RELOCATION): Define.
 431
 432 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
 433
 434         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
 435
 436 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 437
 438         * config/tc-i386.c (process_suffix): Check 0x90 instead of
 439         xchg for xchg %rax,%rax.
 440
 441 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 442
 443         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
 444         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
 445
 446 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 447
 448         PR binutils/4218
 449         * config/tc-i386.c (match_template): Properly handle 64bit mode
 450         "xchg %eax, %eax".
 451
 452 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
 453
 454         PR gas/4124
 455         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
 456
 457 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 458
 459         * Makefile.am: Run dep-am.
 460         * Makefile.in: Regenerated.
 461
 462         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
 463
 464         * config/tc-i386.h: Include "opcodes/i386-opc.h".
 465         (NOP_OPCODE): Removed.
 466         (template): Likewise.
 467
 468 2007-03-21  Andreas Schwab  <schwab@suse.de>
 469
 470         * config/tc-i386.h (NOP_OPCODE): Restore.
 471
 472 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
 473
 474         * config/tc-arm.c (do_mul): Don't warn about overlapping
 475         Rd and Rm operands when assembling for v6 or above.
 476         Correctly capitalize register names in the messages.
 477         (do_mlas): Likewise.  Delete spurious blank line.
 478
 479 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
 480
 481         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
 482
 483 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
 484
 485         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
 486         i386_regtab.
 487         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
 488         on i386_regtab.
 489
 490 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
 491
 492         PR gas/4184
 493         * app.c (do_scrub_chars): PUT after setting states.
 494
 495 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
 496
 497         * Makefile.am: Run "make dep-am".
 498         * Makefile.in: Regenerated.
 499
 500         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
 501         "opcode/i386.h".
 502         (md_begin): Check reg_name != NULL for the last entry in
 503         i386_regtab.
 504
 505         * config/tc-i386.h: Move many entries to opcode/i386.h and
 506         opcodes/i386-opc.h.
 507
 508         * configure.in (need_opcodes): Set true for i386.
 509         * configure: Regenerated.
 510
 511 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
 512
 513         * Makefile.am (REPORT_BUGS_TO): Removed.
 514         (INCLUDES): Remove -DREPORT_BUGS_TO.
 515         * Makefile.in: Regenerated.
 516
 517         * configure.in (--with-bugurl): Removed.
 518         * configure: Regenerated.
 519
 520         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
 521         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
 522         (TEXI2DVI): Likewise.
 523         (gasver.texi): Removed.
 524         (MOSTLYCLEANFILES): Remove gasver.texi.
 525         (as.1): Don't depend on gasver.texi.
 526         * doc/Makefile.in: Regenerated.
 527
 528         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
 529
 530 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
 531
 532         * config/tc-arm.c (arm_copy_symbol_attributes): New.
 533         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
 534         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
 535         * gas/symbols.c (copy_symbol_attributes): Use
 536         TC_COPY_SYMBOL_ATTRIBUTES.
 537
 538 2007-03-14  Paul Brook  <paul@codesourcery.com>
 539
 540         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
 541
 542 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
 543
 544         PR 4029
 545         * write.c (relax_segment): Insert extra alignment padding
 546         to break infinite relax loop when given impossible
 547         gcc_except_table assembly.
 548
 549 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
 550
 551         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
 552         on i.tm.base_opcode.
 553         (match_template): Likewise.
 554         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
 555
 556         * config/tc-i386.h (Opcode_D): New.
 557         (Opcode_FloatR): Likewise.
 558         (Opcode_FloatD): Likewise.
 559         (D): Redefined.
 560         (W): Likewise.
 561         (FloatMF): Likewise.
 562         (FloatR): Likewise.
 563         (FloatD): Likewise.
 564
 565 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
 566
 567         * app.c (do_scrub_chars): Recognize comments after # line "file".
 568         * read.c (get_linefile_number): New.
 569         (s_app_line): Accept ill-formed .linefile lines as comments.
 570
 571 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
 572
 573         * config/tc-i386.h (WORKING_DOT_WORD): Define.
 574
 575 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
 576
 577         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
 578         * as.h (new_logical_line_flags): New.
 579         * input-scrub.c (new_logical_line): Turned into wrapper for...
 580         (new_logical_line_flags): this.  Handle flags.
 581         * read.c (potable): Add linefile.  Adjust appline argument.
 582         (s_app_file): Fake .appfiles no more.
 583         (s_app_line): For .linefile, accept file name and flags.
 584
 585 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
 586
 587         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
 588
 589 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
 590
 591         * Makefile.am: Run "make dep-am".
 592         * Makefile.in: Regenerate.
 593         * po/POTFILES.in: Regenerate.
 594
 595 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
 596
 597         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
 598         bug-reporting URL.
 599         * doc/Makefile.am (gasver.texi): Define BUGURL.
 600         * doc/as.texinfo: Use BUGURL.
 601         * Makefile.in, configure, doc/Makefile.in: Regenerate.
 602
 603 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
 604
 605         * config/tc-s390.c (md_parse_option): z9-ec option added.
 606
 607 2007-03-02  Paul Brook  <paul@codesourcery.com>
 608
 609         * config/tc-arm.c (relax_immediate): Always return positive values.
 610         (relaxed_symbol_addr): New function.
 611         (relax_adr, relax_branch): Use it.
 612         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
 613
 614 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
 615
 616         * as.c (parse_args): Update copyright date.
 617
 618 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
 619
 620         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
 621
 622 2007-02-28  Nick Clifton  <nickc@redhat.com>
 623
 624         PR gas/3797
 625         * config/tc-d10v.c (do_assemble): Do not generate error messages,
 626         just return -1 whenever a problem is encountered.
 627         (md_assemble): If do_assemble returns -1 generate a non-fatal
 628         error message and return.
 629
 630         PR gas/2623
 631         * config/tc-msp430.c (line_separator_char): Change to '{'.
 632
 633 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
 634
 635         * config/tc-m68hc11.c (fixup24): Correct fixup size.
 636         (build_jump_insn): Likewise.
 637         (build_insn): Likewise.
 638         (s_m68hc11_relax): Likewise.
 639
 640 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
 641
 642         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
 643
 644 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
 645
 646         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
 647
 648 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
 649
 650         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
 651         (md_assemble): Likewise.
 652
 653 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
 654
 655         * write.c (size_seg): Always clear SEC_RELOC here.
 656         (install_reloc): New function, extracted from..
 657         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
 658         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
 659         testing frag size.  Set SEC_RELOC here.
 660
 661 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
 662
 663         PR 4082
 664         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
 665
 666 2007-02-20  Thiemo Seufer  <ths@mips.com>
 667
 668         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
 669
 670 2007-02-20  Thiemo Seufer  <ths@mips.com>
 671
 672         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
 673
 674 2007-02-20  Thiemo Seufer  <ths@mips.com>
 675             Chao-Ying Fu  <fu@mips.com>
 676
 677         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
 678         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
 679         (macro_build): Add case '2'.
 680         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
 681         (validate_mips_insn): Add support for balign instruction.
 682         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
 683         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
 684         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
 685         command line options.
 686         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
 687         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
 688         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
 689         .set dspr2, .set nodspr2.
 690
 691 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
 692
 693         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
 694         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
 695
 696 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
 697
 698         * write.c (TC_FX_SIZE_SLACK): Define.
 699         (write_relocs): Reinstate check for fixup within frag.
 700         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
 701         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
 702         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
 703         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
 704         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
 705
 706 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
 707             Nathan Sidwell  <nathan@codesourcery.com>
 708             Vladimir Prus  <vladimir@codesourcery.com
 709             Joseph Myers  <joseph@codesourcery.com>
 710
 711         * configure.in (--with-bugurl): New option.
 712         * configure: Regenerate.
 713         * dep-in.sed: Remove bin-bugs.h.
 714         * Makefile.am (REPORT_BUGS_TO): Define.
 715         (INCLUDES): Define REPORT_BUGS_TO.
 716         (DEP_INCLUDES): Likewise.
 717         ($(OBJS)): No longer depend on bin-bugs.h.
 718         * Makefile.in: Regenerate.
 719         * doc/Makefile.in: Regenerate.
 720         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
 721         * as.h: Remove include of bin-bugs.h.
 722
 723 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
 724
 725         * write.c: White space fixes.
 726         (fixup_segment): Move symbol_mri_common_p adjustments..
 727         (write_relocs): ..and symbol_equated_reloc_p adjustments..
 728         (adjust_reloc_syms): ..to here.
 729
 730 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
 731
 732         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
 733         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
 734         (subseg_set_rest): Remove unnecessary cast.
 735         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
 736         Remove unnecessary forward declarations and casts.
 737         (set_symtab): Delete extern bfd_alloc.
 738         (fixup_segment): Move.
 739
 740 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
 741
 742         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
 743         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
 744         (mcf5475_ctrl, mcf5485_ctrl): New.
 745         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
 746         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
 747         (init_table): Add asid, mmubar, adjust rombar0.
 748
 749 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
 750
 751         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
 752         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
 753         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
 754         code, and test for these insns using a combination of
 755         opcode_modifier and operand_types.
 756
 757 2007-02-07  Paul Brook  <paul@codesourcery.com>
 758
 759         * configure.tgt: Add arm*-*-uclinux-*eabi.
 760
 761 2007-02-05  Dave Brolley  <brolley@redhat.com>
 762             Richard Sandiford  <rsandifo@redhat.com>
 763             DJ Delorie  <dj@redhat.com>
 764             Stan Cox  <scox@redhat.com>
 765             Jim Blandy  <jimb@redhat.com>
 766             Nick Clifton  <nickc@redhat.com>
 767             Jim Wilson  <wilson@redhat.com>
 768             Frank Ch. Eigler  <fche@redhat.com>
 769             Graydon Hoare  <graydon@redhat.com>
 770             Ben Elliston  <bje@redhat.com>
 771             John Healy  <jhealy@redhat.com>
 772             Richard Henderson  <rth@redhat.com>
 773
 774         * Makefile.am (CPU_TYPES): Add mep.
 775         (TARGET_CPU_CFILES): Add tc-mep.c.
 776         (TARGET_CPU_HFILES): Add tc-mep.h.
 777         (DEPTC_mep_elf): New variable.
 778         (DEPTC_mep_coff): Likewise.
 779         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
 780         * configure.in: Support mep.
 781         * configure.tgt: Likewise.
 782         * config/tc-mep.c: New file.
 783         * config/obj-elf.c: New file.
 784         * config/tc-mep.c: New file.
 785         * config/tc-mep.h: New file.
 786         * testsuite/gas/mep: New testsuite with content.
 787         * Makefile.in: Regenerate.
 788         * configure: Regenerate.
 789
 790 2007-02-05  Dave Brolley  <brolley@redhat.com>
 791
 792         * cgen.c (gas_cgen_install_complex_reloc): Removed.
 793         (complex_reloc_installation_howto): Removed.
 794
 795 2007-02-05  Dave Brolley  <brolley@redhat.com>
 796             Graydon Hoare  <graydon@redhat.com>
 797             DJ Delorie  <dj@redhat.com>
 798             Catherine Moore  <clm@redhat.com>
 799             Michael Chastain  <chastain@redhat.com>
 800             Frank Ch. Eigler  <fche@redhat.com>
 801
 802         * symbols.c (use_complex_relocs_for): New, to decide
 803         when to use complex relocs. Add signed RELC support.
 804         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
 805         encode expression symbols as mangled complex relocation symbols (when
 806         compiled with -DOBJ_COMPLEX_RELOC).
 807         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
 808         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
 809         encode_addend with new args. Modify to get start, length from
 810         ifield whenever it is set. Also change condition on which
 811         self-describing relocs are encoded. Add hook into
 812         gas_cgen_encode_addend.
 813         (queue_fixup_recursively): Add signed RELC support. Change from masked
 814         expr to trunc flag. Restore assignment of sub-field value to
 815         temporary in fixups array. Reflect changed meaning of last arg to
 816         queue_fixup_recursively.
 817         (fixup): Add cgen_maybe_multi_ifield member.
 818         (make_right_shifted_expr): New function.
 819         (queue_fixup): Change to recursive function that fragments
 820         fixups if operand has a multi-ifield.
 821         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
 822         symbols, call weak_operand_overflow_check, and fragment call
 823         queue_fixup with operand fields.
 824         (gas_cgen_finish_insn) Modify to manage ifield pointer.
 825         (weak_operand_overflow_check): New function to try to select
 826         insns correctly.
 827         (gas_cgen_encode_addend): New function for relc.
 828         (gas_cgen_install_complex_reloc): Likewise.
 829         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
 830         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
 831         cgen_maybe_multi_ifield field to fx_cgen substructure.
 832         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
 833         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
 834
 835 2007-02-03  DJ Delorie  <dj@delorie.com>
 836
 837         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
 838         byte relocs.
 839         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
 840         (m32c_cons_fix_new): Prototype.
 841
 842 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 843
 844         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
 845         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
 846
 847 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 848
 849         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
 850         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
 851         (map_suffix_reloc_to_operator): New.
 852         (map_operator_to_reloc): New.
 853         (expression_maybe_register): Fix incorrect test of return value from
 854         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
 855         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
 856
 857 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 858
 859         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
 860         (tinsn_get_tok): Delete prototype.
 861         * config/tc-xtensa.c (tinsn_get_tok): Delete.
 862
 863 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 864
 865         * config/xtensa-relax.h (struct build_instr): Delete id field.
 866         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
 867         and LABEL tokens.
 868         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
 869         set op_data fields to zero.
 870         (parse_id_constant): Delete.
 871         (build_transition): Remove code to handle numbered literals and labels.
 872
 873 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 874
 875         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
 876         (build_transition_table): Likewise.
 877
 878 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
 879
 880         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
 881         fx_tcbit.
 882         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
 883
 884 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
 885
 886         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
 887         (struct fix <fx_plt>): Rename to tcbit2.
 888         * write.c (fix_new_internal): Adjust.
 889         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
 890         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 891         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 892         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 893         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 894         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 895         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 896         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 897         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
 898         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
 899         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
 900         Instead, compare fx_r_type.
 901         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
 902         fx_tcbit in place of fx_plt.
 903         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
 904         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
 905         to fx_plt.
 906
 907 2007-01-30  Nick Clifton  <nickc@redhat.com>
 908
 909         * as.c (main): Mark symbols created via the --defsym command line
 910         option as volatile so that they can be overridden later on by a
 911         .set directive.  This maintains compatibility with the behaviour
 912         of earlier versions of the assembler.
 913         * doc/as.texinfo (--defsym): Document that the defined symbol's
 914         value can be overridden via a .set directive.
 915
 916 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
 917
 918         * config/tc-i386.c (swap_imm_operands): Renamed to ...
 919         (swap_2_operands): This.  Take 2 ints.
 920         (md_assemble): Updated.
 921         (swap_operands): Call swap_2_operands to swap 2 operands.
 922
 923 2007-01-24  DJ Delorie  <dj@redhat.com>
 924
 925         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
 926
 927 2007-01-22  Nick Clifton  <nickc@redhat.com>
 928
 929         PR gas/3871
 930         * tc-score.c: Remove unnecessary uses of _().
 931         Make the err_msg[] a file level local array in order to save
 932         storage space.
 933         Remove unnecessary sprintf()s.
 934
 935 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
 936
 937         PR gas/3871
 938         * config/tc-score.c : Using _() for const string.
 939         Do not assign inst.error with a local string pointer.
 940         (md_section_align): Pad section.
 941
 942 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
 943
 944         * config/tc-i386.c (build_modrm_byte): Check number of operands
 945         when procssing memory/register operand.
 946
 947 2007-01-12  Nick Clifton  <nickc@redhat.com>
 948
 949         PR gas/3856
 950         * macro.c (expand_irp): Do not ignore spaces inside quoted
 951         strings.
 952
 953 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
 954
 955         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
 956         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
 957         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
 958         (TC_FORCE_RELOCATION): Define.
 959         (TC_FORCE_RELOCATION_LOCAL): Define.
 960         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
 961
 962 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
 963
 964         * input-file.c (input_file_open): Check fgets return.
 965
 966 2007-01-11  Paul Brook  <paul@codesourcery.com>
 967
 968         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
 969
 970 2007-01-11  Nick Clifton  <nickc@redhat.com>
 971
 972         PR gas/3707
 973         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
 974         variable.
 975
 976         * config/tc-mcore.c (md_number_to_chars): Use
 977         number_to_chars_{big|little}endian.
 978
 979 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
 980
 981         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
 982         architecture by itself.
 983         (m68k_ip): Don't issue a warning for tbl instructions on fido.
 984         (m68k_elf_final_processing): Treat Fido as an architecture by
 985         itself.
 986
 987 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
 988
 989         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
 990
 991 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
 992
 993         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
 994         depending on allow_naked_reg.
 995
 996 2007-01-04  Paul Brook  <paul@codesourcery.com>
 997
 998         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
 999
1000 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
1001
1002         PR gas/3830
1003         * config/tc-i386.c (register_prefix): New.
1004         (set_intel_syntax): Set set_intel_syntax to "" if register
1005         prefix isn't needed.
1006         (check_byte_reg): Use register_prefix for error message.
1007         (check_long_reg): Likewise.
1008         (check_qword_reg): Likewise.
1009         (check_word_reg): Likewise.
1010
1011 2006-01-04  Julian Brown  <julian@codesourcery.com>
1012
1013         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1014         (do_neon_qshl_imm): Likewise.
1015         (do_neon_rshl): New function. Handle rounding variants of
1016         v{q}shl-by-register.
1017         (insns): Use do_neon_rshl for vrshl, vqrshl.
1018
1019 2007-01-04  Paul Brook  <paul@codesourcery.com>
1020
1021         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1022         and vacle.
1023
1024 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1025
1026         * config/tc-i386.c (swap_operands): Remove branches.
1027
1028 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1029
1030         * config/tc-i386.c: Update copyright year.
1031         * config/tc-i386.h: Likewise.
1032
1033 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1034
1035         * config/tc-i386.c (smallest_imm_type): Return unsigned int
1036         instead of int.
1037
1038 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1039
1040         * config/tc-i386.c: Convert to ISO C90 formatting
1041         * config/tc-i386.h: Likewise.
1042
1043 2007-01-03  David Daney  <ddaney@avtrex.com>
1044
1045         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
1046         documentation.
1047
1048 For older changes see ChangeLog-2006
1049 \f
1050 Local Variables:
1051 mode: change-log
1052 left-margin: 8
1053 fill-column: 74
1054 version-control: never
1055 End: