gas/ChangeLog

   1 2014-08-20  Maciej W. Rozycki  <macro@codesourcery.com>
   2
   3         * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
   4         (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
   5         (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
   6
   7 2014-08-20  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
   8
   9         * config/tc-arm.c (parse_ifimm_zero): New function.
  10         (enum operand_parse_code): Add OP_RSVD_FI0 value.
  11         (parse_operands): Handle OP_RSVD_FI0.
  12         (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
  13
  14 2014-08-20  Alan Modra  <amodra@gmail.com>
  15
  16         * Makefile.am: Typo fix.
  17         * Makefile.in: Regenerate.
  18         * po/POTFILES.in: Regenerate.
  19
  20 2014-08-19  Andreas Tobler  <andreast@fgznet.ch>
  21
  22         * Makefile.am: Add FreeBSD ARM support.
  23         * Mafefile.in: Regenerate.
  24         * configure.tgt: Add FreeBSD ARM support.
  25         * config/te-armfbsdeabi.h: New file.
  26         * config/te-armfbsdvfp.h: Likewise.
  27
  28 2014-08-19  Alan Modra  <amodra@gmail.com>
  29
  30         * configure: Regenerate.
  31
  32 2014-08-18  Nick Clifton  <nickc@redhat.com>
  33
  34         * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
  35         RELOC_RL78_DIFF fixups.
  36
  37 2014-08-18  Alan Modra  <amodra@gmail.com>
  38
  39         * read.c (parse_mri_cons): Warning fix.
  40
  41 2014-08-14  Alan Modra  <amodra@gmail.com>
  42
  43         * configure.ac: Move ACX_LARGEFILE after LT_INIT.
  44         * config.in: Regenerate.
  45         * configure: Regenerate.
  46
  47 2014-08-06  Ilya Tocar  <ilya.tocar@intel.com>
  48
  49         * config/tc-i386.c (omit_lock_prefix): New.
  50         (output_insn): Omit lock prefix if omit_lock_prefix is true.
  51         (OPTION_omit_lock_prefix): New.
  52         (md_longopts): Add momit-lock-prefix.
  53         (md_parse_option): Handle momit-lock-prefix.
  54         (md_show_usage): Add momit-lock-prefix=[no|yes].
  55         * doc/c-i386.texi (momit-lock-prefix): Document.
  56
  57 2014-08-01  Takashi Yoshii  <yoshii.takashi@renesas.com>
  58
  59         PR 10378
  60         * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
  61         SWITCH_TABLE case.
  62
  63 2014-07-29  Matthew Fortune  <matthew.fortune@imgtec.com>
  64
  65         * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
  66         and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
  67
  68 2014-07-29  Matthew Fortune  <matthew.fortune@imgtec.com>
  69
  70         * config/tc-mips.c (mips_flags_frag): New static global.
  71         (struct mips_set_options): Add oddspreg field.
  72         (file_mips_opts, mips_opts): Initialize oddspreg.
  73         (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
  74         Loongson-3a.
  75         (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
  76         and -mno-odd-spreg options.
  77         (md_begin): Create .MIPS.abiflags section.
  78         (fpabi_incompatible_with, fpabi_requires): New static function.
  79         (check_fpabi): Likewise.
  80         (mips_check_options): Handle fp=xx and oddspreg restrictions.
  81         (file_mips_check_options): Set oddspreg by default for fp=xx.
  82         (mips_oddfpreg_ok): Re-write function.
  83         (check_regno): Check odd numbered registers regardless of FPR size.
  84         For fp != 32 use as_bad instead of as_warn.
  85         (match_float_constant): Rewrite check regarding FP register width.  Add
  86         support for generating constants when MXHC1 is present.  Handle fp=xx
  87         to comply with the ABI.
  88         (macro): Update M_LI_DD similarly to match_float_constant.  Generate
  89         MTHC1 when available.  Check that correct code can be generated for
  90         fp=xx and fp=64 ABIs.
  91         (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
  92         options.
  93         (mips_convert_ase_flags): New static function.
  94         (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
  95         to determine when to add the EF_MIPS_FP64 flag.  Populate the
  96         .MIPS.abiflags section.
  97         (md_mips_end): Update .gnu_attribute based on command line and .module
  98         as applicable.  Use check_fpabi to ensure .gnu.attribute and command
  99         line/.module options are consistent.
 100         * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
 101         -mfpxx, -modd-spreg and -mno-odd-spreg options.
 102         * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
 103         gnu_attribute values and FP ABIs.
 104
 105 2014-07-27  Joel Sherrill <joel.sherrill@oarcorp.com>
 106
 107         Add RTEMS target support and simplify matching
 108
 109         * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
 110         (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
 111
 112 2014-07-27  Anthony Green  <green@moxielogic.com>
 113
 114         * configure.tgt (generic_target): Add moxie-*-moxiebox*
 115         * config/tc-moxie.c: Remove moxie_target_format.
 116         (md_begin): Set default target_big_endian.
 117         * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
 118         (TARGET_FORMAT): Set based on target_big_endian.
 119
 120 2014-07-26  Alan Modra  <amodra@gmail.com>
 121
 122         * config/bfin-parse.y: Don't include obstack.h.
 123         * config/obj-aout.c: Likewise.
 124         * config/obj-coff.c: Likewise.
 125         * config/obj-som.c: Likewise.
 126         * config/tc-bfin.c: Likewise.
 127         * config/tc-i960.c: Likewise.
 128         * config/tc-rl78.c: Likewise.
 129         * config/tc-rx.c: Likewise.
 130         * config/tc-tic4x.c: Likewise.
 131         * expr.c: Likewise.
 132         * listing.c: Likewise.
 133         * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
 134         * config/tc-aarch64.c (symbol_locate): Likewise.
 135         * config/tc-arm.c (symbol_locate): Likewise.
 136         * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
 137         * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
 138         (s3_build_dependency_insn_hsh): Likewise.
 139         * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
 140         (s7_build_dependency_insn_hsh): Likewise.
 141         * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
 142         (frag_new): Make parameter a size_t.
 143         (frag_var_init): Make max_chars and var parameters size_t.
 144         (frag_var, frag_variant): Likewise.
 145         (frag_room): Return a size_t.
 146         (frag_align_pattern): Make n_fill parameter a size_t.
 147         * frags.h: Update function prototypes.
 148         * symbols.c (save_symbol_name): Make name_length a size_t.
 149
 150 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 151             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 152             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 153             Sergey Lega  <sergey.s.lega@intel.com>
 154             Anna Tikhonova  <anna.tikhonova@intel.com>
 155             Ilya Tocar  <ilya.tocar@intel.com>
 156             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 157             Ilya Verbin  <ilya.verbin@intel.com>
 158             Kirill Yukhin  <kirill.yukhin@intel.com>
 159             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 160
 161         * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
 162         * doc/c-i386.texi: Document avx512dq/.avx512dq.
 163
 164 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 165             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 166             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 167             Sergey Lega  <sergey.s.lega@intel.com>
 168             Anna Tikhonova  <anna.tikhonova@intel.com>
 169             Ilya Tocar  <ilya.tocar@intel.com>
 170             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 171             Ilya Verbin  <ilya.verbin@intel.com>
 172             Kirill Yukhin  <kirill.yukhin@intel.com>
 173             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 174
 175         * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
 176         * doc/c-i386.texi: Document avx512bw/.avx512bw.
 177
 178 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 179             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 180             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 181             Sergey Lega  <sergey.s.lega@intel.com>
 182             Anna Tikhonova  <anna.tikhonova@intel.com>
 183             Ilya Tocar  <ilya.tocar@intel.com>
 184             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 185             Ilya Verbin  <ilya.verbin@intel.com>
 186             Kirill Yukhin  <kirill.yukhin@intel.com>
 187             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 188
 189         * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
 190         (build_vex_prefix): Don't abort on VEX.W.
 191         (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
 192         (check_VecOperations): Ditto.
 193         * doc/c-i386.texi: Document avx512vl/.avx512vl.
 194
 195 2014-07-21  Joel Sherrill  <joel.sherrill@oarcorp.com>
 196
 197         Add or reactivate or1k-*-rtems*
 198         * gas/configure.tgt (or1k-*-rtems*): Add.
 199
 200 2014-07-17  Ilya Tocar  <ilya.tocar@intel.com>
 201
 202         * config/tc-i386.c (parse_register): Set need_vrex.
 203
 204 2014-07-15  Jiong Wang  <jiong.wang@arm.com>
 205
 206         * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
 207         sign extension.  Casting the type of imm1 and imm2 to offsetT.  Fix
 208         one logic error when checking X_op.
 209
 210 2014-07-14  Andreas Schwab  <schwab@linux-m68k.org>
 211
 212         * config/tc-m68k.c (md_convert_frag_1): Don't complain with
 213         --pcrel about TAB (DBCCLBR, LONG) conversion.
 214
 215 2014-07-12  David Majnemer  <david.majnemer@gmail.com>
 216
 217         * read.c (assign_symbol): Don't force "set" symbols local for PE.
 218
 219 2014-07-08  Jiong Wang  <jiong.wang@arm.com>
 220
 221         * config/tc-arm.c (literal_pool): New field "alignment".
 222         (find_or_make_literal_pool): Initialize "alignment" to 2.
 223         (s_ltorg): Align the pool using value of "alignment"
 224         (parse_big_immediate): New parameter "in_exp". Return
 225         parsed expression if "in_exp" is not null.
 226         (parse_address_main): Invoke "parse_big_immediate" for
 227         constant parameter.
 228         (add_to_lit_pool): Add one parameter 'nbytes'.
 229         Split 8 byte entry into two 4 byte entry.
 230         Add padding to align 8 byte entry to 8 byte boundary.
 231         (encode_arm_cp_address): Generate literal pool entry if possible.
 232         (move_or_literal_pool): Generate entry for vldr case.
 233         (enum lit_type): New enum type.
 234         (do_ldst): Use new enum type.
 235         (do_ldstv4): Likewise.
 236         (do_t_ldst): Likewise.
 237         (neon_write_immbits): Support Thumb-2 mode.
 238
 239 2014-07-07  Barney Stratford  <barney_stratford@fastmail.fm>
 240
 241         * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
 242         name as [xyz][hl].  Permit using a symbol whoes name begins with
 243         ‘r’ to refer to a register.
 244         Allow arbitrary expressions for the P and p operators.
 245         (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
 246         BFD_RELOC_AVR_PORT6 relocations.
 247
 248 2014-07-04  Alan Modra  <amodra@gmail.com>
 249
 250         * doc/internals.texi: Update "configure.in" comments.
 251         * acinclude.m4: Likewise.
 252         * config/tc-sparc.c: Likewise.
 253
 254 2014-07-04  Alan Modra  <amodra@gmail.com>
 255
 256         * configure.ac: Rename from configure.in.
 257         * Makefile.in: Regenerate.
 258         * config.in: Regenerate.
 259         * doc/Makefile.in: Regenerate.
 260
 261 2014-07-04  Alan Modra  <amodra@gmail.com>
 262
 263         * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
 264         * doc/Makefile.in: Regenerate.
 265
 266 2014-07-04  Alan Modra  <amodra@gmail.com>
 267
 268         * configure.in: Include bfd/version.m4.
 269         (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
 270         (BFD_VERSION): Delete.
 271         * configure.com: Get bfd version from bfd/version.m4.
 272         * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
 273         * configure: Regenerate.
 274         * Makefile.in: Regenerate.
 275         * doc/Makefile.in: Regenerate.
 276
 277 2014-07-01  Barney Stratford   <barney_stratford@fastmail.fm>
 278             Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 279             Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
 280             Soundararajan  <Sounderarajan.D@atmel.com>
 281
 282         * config/tc-avr.c (mcu_types): Add avrtiny arch.
 283         Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
 284         and attiny40.
 285         (md_show_usage): Add avrtiny arch in usage message.
 286         (avr_operand): validate and issue error for invalid register for
 287         avrtiny.
 288         add new reloc exp for 16 bit lds/sts instruction.
 289         (md_apply_fix): check 16 bit lds/sts operand for out of range and
 290         encode.
 291         (md_assemble): check ISA for arch and issue diagnostic.
 292         * NEWS: Mention new support.
 293         * doc/c-avr.texi: Document support for avrtiny architecture.
 294
 295 2014-06-27  Alan Modra  <amodra@gmail.com>
 296
 297         * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
 298         SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
 299         (obj_mach_o_frob_label): Avoid cascading errors.
 300         (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
 301
 302 2014-06-18  DJ Delorie  <dj@redhat.com>
 303
 304         * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
 305         suffix optional.
 306
 307 2014-06-17  Hans-Peter Nilsson  <hp@bitrange.com>
 308
 309         * config/tc-mmix.c (loc_assert_s): New member frag.
 310         (s_loc): Set it.
 311         (mmix_md_end): If an error is reported for a LOC expression, patch
 312         up the related frag.
 313
 314 2014-06-17  Chris Metcalf  <cmetcalf@tilera.com>
 315
 316         PR gas/16908
 317         * macro.c (buffer_and_nest): Honour #line directives inside
 318         macros.
 319
 320 2014-06-17 Jiong Wang <jiong.wang@arm.com>
 321
 322         * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
 323
 324 2014-06-17  Hans-Peter Nilsson  <hp@axis.com>
 325
 326         * config/tc-cris.c (cris_bad): New function.
 327         (cris_process_instruction): Where applicable, use it instead of
 328         as_bad.
 329
 330 2014-06-16  Nick Clifton  <nickc@redhat.com>
 331
 332         * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
 333
 334 2014-06-16  Jiong Wang  <jiong.wang@arm.com>
 335
 336         * config/tc-aarch64.c (END_OF_INSN): New macro.
 337         (parse_operands): Handle operand given and in wrong format when
 338         operand is optional.
 339
 340 2014-06-16  Alan Modra  <amodra@gmail.com>
 341
 342         * write.h (subsegs_finish): Delete declaration.
 343         * write.c (subsegs_finish): Make static.
 344         (write_object_file): Call subsegs_finish from here.  Don't print
 345         warning and error count here..
 346         * as.c (main): ..do so here instead.  Remove dead code for "no
 347         object file generated".  Split out count strings to better support
 348         internationalisation.  Don't call subsegs_finish. Tidy setting of
 349         "keep_it".  Run write_object_file even after errors.
 350         (keep_it): Make static.
 351         * config/obj-elf.c (elf_frob_symbol): Remove assert.
 352         (elf_frob_file_before_adjust): Likewise.
 353
 354 2014-06-16  Alan Modra  <amodra@gmail.com>
 355
 356         * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
 357         earlier.
 358
 359 2014-06-16  Alan Modra  <amodra@gmail.com>
 360
 361         * config/tc-i386.c (reloc): Don't avoid pcrel check for
 362         BFD_RELOC_SIZE64.  Return NO_RELOC on failing pcrel check.
 363
 364 2014-06-16  Alan Modra  <amodra@gmail.com>
 365
 366         * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
 367         (tic6x_output_exidx_entry): Likewise.
 368         (md_apply_fix): Simplify 1 byte md_number_to_chars.
 369
 370 2014-06-16  Alan Modra  <amodra@gmail.com>
 371
 372         * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
 373         end of archive to temp file.
 374         (tic54x_start_line_hook): Start scan for parallel on next line,
 375         not one char into next line (which may overrun the buffer).
 376
 377 2014-06-16  Alan Modra  <amodra@gmail.com>
 378
 379         * config/tc-vax.c (md_apply_fix): Rewrite.
 380         (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
 381         define rather than the equivalent BFD_RELOC_NONE.
 382
 383 2014-06-16  Alan Modra  <amodra@gmail.com>
 384
 385         * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
 386         (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
 387         and BFD_RELOC_ARM_TLS* relocs.  Simplify BFD_RELOC_8 case.
 388
 389 2014-06-16  Alan Modra  <amodra@gmail.com>
 390
 391         * config/tc-cris.c (md_create_long_jump): Follow "short" jump
 392         with a nop rather than leaving uninitialised.
 393
 394 2014-06-13  Chen Gang  <gang.chen.5i5j@gmail.com>
 395
 396         * config/tc-score7.c: Replace sprintf with strcpy where
 397         appropriate.
 398         (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
 399         frag.
 400         * config/tc-score.c (s3_relax_branch_inst16): Likewise.
 401         (s3_relax_cmpbranch_inst32): Likewise.
 402
 403 2014-06-07  Alan Modra  <amodra@gmail.com>
 404
 405         * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
 406         on unsigned fields.  Comment on PPC_OPERAND_SIGNOPT signed fields
 407         in 64-bit mode.
 408
 409 2014-06-02  Martin Storsjo  <martin@martin.st>
 410
 411         * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
 412
 413 2014-06-05  Joel Brobecker  <brobecker@adacore.com>
 414
 415         * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
 416         bfd's development.sh.
 417         * Makefile.in, configure: Regenerate.
 418
 419 2014-06-03  Nick Clifton  <nickc@redhat.com>
 420
 421         * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
 422         (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
 423         * doc/c-msp430.texi: Update command line option description.
 424
 425 2014-05-22  Alan Modra  <amodra@gmail.com>
 426
 427         * listing.c (listing_warning, listing_error): Add space after colon.
 428         * messages.c (as_warn_internal, as_bad_internal): Use the same
 429         string as above.
 430
 431 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 432
 433         * config/tc-mips.c (file_mips_opts_checked): New static global.
 434         (s_module): New static function.
 435         (file_ase): Remove.
 436         (mips_pseudo_table): Add .module handler.
 437         (mips_set_ase): Add opts argument and use instead of mips_opts.
 438         (md_assemble): Use file_mips_check_options.
 439         (md_parse_option): Update to use file_mips_opts instead of mips_opts.
 440         (mips_set_architecture): Delete function.  Moved to...
 441         (mips_after_parse_args): Here.  All logic now applies to
 442         file_mips_opts first and then copies the final state to mips_opts.
 443         Move error checking and defaults inference to mips_check_options and
 444         file_mips_check_options.
 445         (mips_check_options): New static function.  Common option checking for
 446         command line, .module and .set.  Use .module values in error messages
 447         instead of refering to command line options.
 448         (file_mips_check_options): New static function.  A wrapper for
 449         mips_check_options with file_mips_opts.  Updates BFD arch based on
 450         final options.
 451         (s_mipsset): Split into s_mipsset and parse_code_option.  Settings
 452         supported by both .set and .module are moved to parse_code_option.
 453         Warnings and errors are kept in s_mipsset because when
 454         parse_code_option is used with s_module the warnings are deferred
 455         until code is generated.  Any setting supporting 'default' value is
 456         kept in s_mipsset as it is not applicable to s_module. Inferred
 457         settings are also kept in s_mipsset as s_module does not infer any
 458         settings.  Use mips_check_options.
 459         (parse_code_option): New static function derived from s_mipsset.
 460         (s_module): New static function that implements .module.  Allows file
 461         level settings to be changed until code is generated.
 462         (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
 463         (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
 464         (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
 465         (md_mips_end): Use file_mips_check_options.
 466         * doc/c-mips.texi: Document .module.
 467
 468 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 469
 470         * messages.c (as_warn_internal): Remove extra whitespace from
 471         warning messages.
 472
 473 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 474
 475         * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
 476         (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
 477
 478 2014-05-20  Mike Stump  <mikestump@comcast.net>
 479
 480         * messages.c (as_warn_internal): Ensure we don't interleave output
 481         within a single line when make -j is used.
 482         (as_bad_internal): Likewise.
 483
 484 2014-05-20  Richard Sandiford  <rdsandiford@googlemail.com>
 485
 486         * config/obj-elf.h (obj_elf_seen_attribute): Declare.
 487         * config/obj-elf.c (recorded_attribute_info): New structure.
 488         (recorded_attributes): New variable.
 489         (record_attribute, obj_elf_seen_attribute): New functions.
 490         (obj_elf_vendor_attribute): Record which attributes have been seen.
 491
 492 2014-05-20  Nick Clifton  <nickc@redhat.com>
 493
 494         * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
 495         Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
 496         (msp430_srcoperand): Store vshift value in operand.
 497
 498 2014-05-19  Nick Clifton  <nickc@redhat.com>
 499
 500         PR gas/16858
 501         * config/tc-i386.c (md_apply_fix): Improve the detection of code
 502         symbols for 32-bit PE targets.
 503
 504 2014-05-18  Richard Sandiford  <rdsandiford@googlemail.com>
 505
 506         * config/tc-mips.c (md_obj_begin): Delete.
 507         (md_obj_end): Fold into...
 508         (md_mips_end): ...here.  Move to end of file.
 509
 510 2014-05-17  Nick Clifton  <nickc@redhat.com>
 511
 512         PR gas/16946
 513         * config/tc-v850.c (handle_ctoff): Generate an error if called
 514         when using the RH850 ABI.
 515
 516 2014-05-16  Kaushik Phata  <Kaushik.Phatak@kpit.com>
 517
 518         * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
 519         and OPTION_64BIT_DOUBLES.
 520         (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
 521         (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
 522         (md_show_usage): Show all of the RL78 options.
 523         (rl78_float_cons): New static functions.
 524         (md_pseudo_table): Update handler for "double".
 525         * doc/c-rl78.texi: Document new options.
 526         * doc/as.texinfo: Likewise.
 527
 528 2014-05-13  Matthew Fortune  <matthew.fortune@imgtec.com>
 529
 530         * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
 531         (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
 532         (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
 533         (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
 534
 535 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 536
 537         * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
 538         references.
 539
 540 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 541
 542         * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
 543         Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
 544         (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
 545         file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
 546         one struct...
 547         (file_mips_opts): Here. New static global. Update throughout.
 548         (mips_opts): Update defaults for gp32 and fp.
 549
 550 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 551
 552         * config/tc-mips.c (streq): Define.
 553         (mips_convert_symbolic_attribute): New function.
 554         * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
 555         (mips_convert_symbolic_attribute): New prototype.
 556
 557 2014-05-02  Max Filippov  <jcmvbkbc@gmail.com>
 558
 559         * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
 560         fixups as signed.
 561
 562 2014-05-07  Andrew Bennett  <andrew.bennett@imgtec.com>
 563
 564         * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
 565         and mips64r5.
 566         (ISA_HAS_64BIT_FPRS): Likewise.
 567         (ISA_HAS_ROR): Likewise.
 568         (ISA_HAS_ODD_SINGLE_FPR): Likewise.
 569         (ISA_HAS_MXHC1): Likewise.
 570         (hilo_interlocks): Likewise.
 571         (md_longopts): Likewise.
 572         (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
 573         (ISA_HAS_DROR): Likewise.
 574         (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
 575         OPTION_MIPS64R5.
 576         (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
 577         mips64r5.
 578         (md_parse_option): Likewise.
 579         (s_mipsset): Likewise.
 580         (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
 581         and mips64r5.  Also change p5600 entry to be mips32r5.
 582         * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
 583         mips64r5.
 584         * configure: Regenerate.
 585         * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
 586         -mips64r5 command line options.
 587         * doc/as.texinfo: Likewise.
 588
 589 2014-04-28  Nick Clifton  <nickc@redhat.com>
 590
 591         PR gas/16858
 592         * config/tc-i386.c (md_apply_fix): Do not adjust value of
 593         pc-relative fixes against weak symbols.
 594
 595 2014-04-26  Alan Modra  <amodra@gmail.com>
 596
 597         * po/POTFILES.in: Regenerate.
 598
 599 2014-04-24  Nick Clifton  <nickc@redhat.com>
 600
 601         * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
 602         based targets.
 603
 604 2014-04-23  Will Newton  <will.newton@linaro.org>
 605
 606         * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
 607         directly instead of mapping_state.
 608
 609 2014-04-23  Andrew Bennett  <andrew.bennett@imgtec.com>
 610
 611         * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
 612         (md_longopts): Add xpa and no-xpa command line options.
 613         (mips_ases): Add MIPS XPA ASE.
 614         (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
 615         * doc/as.texinfo: Document the MIPS XPA command line options.
 616         * doc/c-mips.texi: Document the MIPS XPA command line options,
 617         and assembler directives.
 618
 619 2014-04-22  Sandra Loosemore  <sandra@codesourcery.com>
 620
 621         * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
 622         unbreak self-test mode.
 623
 624 2014-04-22  Max Filippov  <jcmvbkbc@gmail.com>
 625
 626         * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
 627         first section frag.
 628
 629 2014-04-22  Christian Svensson  <blue@cmd.nu>
 630
 631         * Makefile.am: Remove openrisc and or32 support.  Add support for or1k.
 632         * configure.in: Likewise.
 633         * configure.tgt: Likewise.
 634         * doc/as.texinfo: Likewise.
 635         * config/obj-coff.h: Likewise.
 636         * config/tc-or1k.c: New file.
 637         * config/tc-or1k.h: New file.
 638         * config/tc-openrisc.c: Delete.
 639         * config/tc-openrisc.h: Delete.
 640         * config/tc-or32.c: Delete.
 641         * config/tc-or32.h: Delete.
 642         * Makefile.in: Regenerate.
 643         * configure: Regenerate.
 644
 645 2014-04-16  Alan Modra  <amodra@gmail.com>
 646
 647         * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
 648         * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
 649
 650 2014-04-10  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 651
 652         * config/tc-avr.c: Add new flag mlink-relax.
 653         (md_show_usage): Add flag and help text.
 654         (md_parse_option): Record whether link relax is turned on.
 655         (relaxable_section): New.
 656         (avr_validate_fix_sub): New.
 657         (avr_force_relocation): New.
 658         (md_apply_fix): Generate DIFF reloc.
 659         (avr_allow_local_subtract): New.
 660
 661         * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
 662         (TC_FORCE_RELOCATION): Define.
 663         (TC_FORCE_RELOCATION_SUB_SAME): Define.
 664         (TC_VALIDATE_FIX_SUB): Define.
 665         (avr_force_relocation): Declare.
 666         (avr_validate_fix_sub): Declare.
 667         (md_allow_local_subtract): Define.
 668         (avr_allow_local_subtract): Declare.
 669
 670 2014-04-10  Andrew Bennett  <andrew.bennett@imgtec.com>
 671
 672         * config/tc-mips.c (mips_cpu_info_table): Add P5600
 673         configuation.
 674         * doc/c-mips.texi: Document p5600.
 675
 676 2014-04-09  Nick Clifton  <nickc@redhat.com>
 677
 678         * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
 679         * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
 680         * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
 681         * read.c (emit_expr_fix): Mark the r parameter as potentially
 682         unused.
 683
 684 2014-04-09  Alan Modra  <amodra@gmail.com>
 685
 686         * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
 687         New static vars.
 688         (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
 689         (ppc_elf_cons_fix_check): New function.
 690         (md_assemble): Set last_insn, last_seg, last_subseg.
 691         (ppc_byte, md_apply_fix): Handle warn_476.
 692         * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
 693         (ppc_elf_cons_fix_check): Declare.
 694         * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
 695
 696 2014-04-09  Alan Modra  <amodra@gmail.com>
 697
 698         * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
 699         * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
 700         * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
 701         (TC_CONS_FIX_NEW): Add RELOC parameter.
 702         * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
 703         * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
 704         * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
 705         * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 706         * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
 707         * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
 708         * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 709         * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
 710         * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
 711         Similarly.
 712         * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
 713         * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
 714         * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
 715         * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
 716         * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
 717         * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 718         * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
 719         * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 720         * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
 721         * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
 722         Similarly.
 723         * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
 724         * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
 725         Similarly.
 726         * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
 727         * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
 728         * gas/config/tc-avr.c (exp_mod_data): Make global.
 729         (pexp_mod_data): Delete.
 730         (avr_parse_cons_expression): Return exp_mod_data pointer.
 731         (avr_cons_fix_new): Add exp_mod_data_t pointer param.
 732         (exp_mod_data_t): Move typedef..
 733         * gas/config/tc-avr.h: ..to here.
 734         (exp_mod_data): Declare.
 735         (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
 736         (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
 737         (TC_CONS_FIX_NEW): Update.
 738         * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
 739         (cons_fix_new_hppa): Add hppa_field_selector param.
 740         (fix_new_hppa): Adjust.
 741         (parse_cons_expression_hppa): Return field selector.
 742         * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
 743         (cons_fix_new_hppa): Likewise.
 744         (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
 745         * gas/config/tc-i386.c (got_reloc): Delete static var.
 746         (x86_cons_fix_new): Add reloc param.
 747         (x86_cons): Return got reloc.
 748         * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
 749         (TC_CONS_FIX_NEW): Add RELOC param.
 750         * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param.  Adjust
 751         calls.
 752         * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
 753         (TC_CONS_FIX_NEW): Add reloc param.
 754         * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
 755         Return reloc.
 756         (cons_fix_new_microblaze): Add reloc param.
 757         * gas/config/tc-microblaze.h: Formatting.
 758         (parse_cons_expression_microblaze): Update proto.
 759         (cons_fix_new_microblaze): Likewise.
 760         * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
 761         (nios2_cons): Return ldo reloc.
 762         (nios2_cons_fix_new): Delete.
 763         * gas/config/tc-nios2.h (nios2_cons): Update prototype.
 764         (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
 765         * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
 766         short.  Make llong use cons.
 767         (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 768         (ppc_elf_cons): Delete.
 769         (ppc_elf_parse_cons): New function.
 770         (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
 771         (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 772         * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
 773         (ppc_elf_parse_cons): Declare.
 774         * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
 775         (sparc_cons): Return reloc specifier.
 776         (cons_fix_new_sparc): Add reloc specifier param.
 777         (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
 778         * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
 779         (TC_PARSE_CONS_RETURN_NONE): Define.
 780         (sparc_cons, cons_fix_new_sparc): Update prototype.
 781         * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
 782         (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 783         (md_assemble): Likewise.
 784         (parse_cons_expression_v850): Return reloc.
 785         (cons_fix_new_v850): Add reloc parameter.
 786         * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
 787         (cons_fix_new_v850): Likewise.
 788         * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
 789         (vax_cons): Return reloc.
 790         (vax_cons_fix_new): Add reloc parameter.
 791         * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
 792         * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
 793         * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
 794         * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
 795         (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
 796         * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
 797         (do_parse_cons_expression): Adjust.
 798         (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
 799         to emit_expr_with_reloc.
 800         (emit_expr_with_reloc): New function handling reloc, mostly
 801         extracted from..
 802         (emit_expr): ..here.
 803         (emit_expr_fix): Add reloc param.  Adjust TC_CONS_FIX_NEW invocation.
 804         Handle reloc.
 805         (parse_mri_cons): Convert to ISO.
 806         * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
 807         (TC_PARSE_CONS_RETURN_NONE): Define.
 808         (emit_expr_with_reloc): Declare.
 809         (emit_expr_fix): Update prototype.
 810         * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
 811
 812 2014-04-03  Ilya Tocar  <ilya.tocar@intel.com>
 813
 814         * config/tc-i386.c (cpu_arch): Add .se1.
 815         * doc/c-i386.texi: Document .se1/se1.
 816
 817 2014-04-02  DJ Delorie  <dj@redhat.com>
 818
 819         * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
 820         pc-relative branches.
 821
 822 2014-04-02  Nick Clifton  <nickc@redhat.com>
 823
 824         PR gas/16765
 825         * config/tc-arm.c (create_unwind_entry): Report an error if an
 826         attempt to recreate an unwind directive is encountered.
 827
 828 2014-03-27  Nick Clifton  <nickc@redhat.com>
 829
 830         * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
 831         sprintf in order to avoid a compile time warning.
 832
 833 2014-03-26  Nick Clifton  <nickc@redhat.com>
 834
 835         * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
 836         relocation is used on an 8-bit operand or vice versa.
 837         (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
 838         (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
 839
 840 2014-03-25  Nick Clifton  <nickc@redhat.com>
 841
 842         * config/obj-coff-seh.c (obj_coff_seh_code): New function -
 843         switches the current segment back to the code segment recorded
 844         when seh_proc was last invoked.
 845         * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
 846
 847 2014-03-25  Alan Modra  <amodra@gmail.com>
 848
 849         * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
 850         (md_assemble): Likewise.  Warn.
 851
 852 2014-03-21  David Weatherford <weath@cadence.com>
 853             Max Filippov <jcmvbkbc@gmail.com>
 854
 855         * config/tc-xtensa.c (xtensa_check_frag_count)
 856         xtensa_create_trampoline_frag,
 857         xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
 858         find_trampoline_seg, search_trampolines, get_best_trampoline,
 859         check_and_update_trampolines, add_jump_to_trampoline,
 860         dump_trampolines): New functions.
 861         (md_parse_option): Add cases for --[no-]trampolines options.
 862         (md_assemble, finish_vinsn, xtensa_end): Add call to
 863         xtensa_check_frag_count.
 864         (xg_assemble_vliw_tokens): Add call to
 865         xtensa_maybe_create_trampoline_frag.
 866         (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
 867         (relax_frag_immed): Relax jump instructions that cannot reach its
 868         target.
 869         * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
 870         relax state.
 871         * doc/as.texinfo: Document --[no-]trampolines command-line options.
 872         * doc/c-xtensa.texi: Document trampolines relaxation and command
 873         line options.
 874         * frags.c (get_frag_count, clear_frag_count): New function.
 875         (frag_alloc): Increment totalfrags counter.
 876         * frags.h (get_frag_count, clear_frag_count): New function.
 877
 878 2014-03-20  DJ Delorie  <dj@redhat.com>
 879
 880         * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
 881         * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
 882         rl78_relax().
 883         * config/tc-rl78.h (md_relax_frag): Define.
 884         (rl78_relax_frag): Declare.
 885         * config/tc-rl78.c (rl78_relax): Add.
 886         (md_assemble): Set up the variable frags also when relaxing.
 887         (op_type_T): New.
 888         (rl78_opcode_type): New.
 889         (rl78_frag_fix_value): New.
 890         (md_estimate_size_before_relax): New-ish.
 891         (rl78_relax_frag): New.
 892         (md_convert_frag): New-ish.
 893
 894 2014-03-20  Richard Sandiford  <rdsandiford@googlemail.com>
 895
 896         * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
 897         * config/tc-mips.c (md_pcrel_from): Remove error message.
 898         (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
 899         BFD_RELOC_32_PCREL.  Report a specific error message for unhandled
 900         PC-relative expressions.  Handle BFD_RELOC_8.
 901
 902 2014-03-19  Jose E. Marchesi  <jose.marchesi@oracle.com>
 903
 904         * config/tc-sparc.c (hpriv_reg_table): Added entries for
 905         %hstick_offset and %hstick_enable.
 906         * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
 907         %hstick_enable hyperprivileged registers.
 908
 909 2014-03-19  Daniel Gutson <daniel.gutson@tallertechnologies.com>
 910             Nick Clifton  <nickc@redhat.com>
 911
 912         * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
 913         CCS syntax compatibility mode is on or off.
 914         (asmfunc_states): New enum to represent the asmfunc directive state.
 915         (asmfunc_state): New variable holding the asmfunc directive state.
 916         (comment_chars): Rename to arm_comment_chars.
 917         (line_separator_chars): Rename to arm_line_separator_chars.
 918         (s_ccs_ref): New function that handles the .ref directive.
 919         (asmfunc_debug): New function.
 920         (s_ccs_asmfunc): New function that handles the .asmfunc directive.
 921         (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
 922         (s_ccs_def): New function that handles the .def directive.
 923         (tc_start_label_without_colon): New function.
 924         (md_pseudo_table): Added new CCS directives.
 925         (arm_ccs_mode): New function that handles the -mccs command line option.
 926         (arm_long_opts): Added new -mccs command line option.
 927         * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
 928         (TC_START_LABEL_WITHOUT_COLON): New macro.
 929         (tc_start_label_without_colon): Added extern function declaration.
 930         (tc_comment_chars): Define.
 931         (tc_line_separator_chars): Define.
 932         * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
 933         * read.c (read_begin): Likewise.
 934         * doc/as.texinfo: Add documentation for the -mccs command line
 935         option.
 936         * doc/c-arm.texi: Likewise.
 937         * doc/internals.texi: Document tc_line_separator_chars.
 938         * NEWS: Mention the new feature.
 939
 940 2014-03-18  Jiong Wang  <jiong.wang@arm.com>
 941
 942         * config/tc-aarch64.c (aarch64_opts): Add new option
 943         "mno-verbose-error".
 944         (verbose_error_p): Initialize to 1.
 945         * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
 946         and -mno-verbose-error.
 947
 948 2014-03-17  Nick Clifton  <nickc@redhat.com>
 949
 950         PR gas/16694
 951         * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
 952         registers as well.
 953
 954 2014-03-13  Richard Earnshaw  <rearnsha@arm.com>
 955             Jiong Wang  <Jiong.Wang@arm.com>
 956
 957         * doc/c-aarch64.texi: Clean up some formatting issues.
 958         (AArch64 Options): Document -mcpu and -march.
 959         (AArch64 Extensions): New node.
 960
 961 2014-03-13  Tristan Gingold  <gingold@adacore.com>
 962
 963         * config/tc-i386.c (use_big_obj): Declare.
 964         (OPTION_MBIG_OBJ): Define.
 965         (md_longopts): Add -mbig-obj option.
 966         (md_parse_option): Handle it.
 967         (md_show_usage): Display help for this option.
 968         (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
 969         * doc/c-i386.texi: Document the option.
 970
 971 2014-03-12  Nick Clifton  <nickc@redhat.com>
 972
 973         PR gas/16688
 974         * config/tc-aarch64.c (literal_expression): New structure.
 975         (literal_pool): Replace exp array with literal_expression array.
 976         (add_to_lit_pool): When adding a bignum cache the big value.
 977         (s_ltorg): When emitting a bignum initialise the global bignum
 978         array from the cached value.
 979
 980 2014-03-12  Alan Modra  <amodra@gmail.com>
 981
 982         * Makefile.in: Regenerate.
 983         * config.in: Regenerate.
 984         * doc/Makefile.in: Regenerate.
 985
 986 2014-03-06  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
 987         Vishnu KS <Vishnu.k_s@atmel.com>
 988         Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 989         Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
 990
 991         * gas/tc-avr.c: Add new devices
 992         avr25: ata5272, attiny828
 993         avr35: ata5505, attiny1634
 994         avr4: atmega8a, ata6285, ata6286, atmega48pa
 995         avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
 996         atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
 997         atmega16hva2
 998         avr51: atmega128a, atmega1284
 999         avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1000         atxmega32e5, atxmega16e5, atxmega8e5
1001         avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1002         atxmega64c3, atxmega64d4
1003         avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1004         atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1005         atxmega256c3, atxmega384c3, atxmega384d3
1006         avrxmega7: atxmega128a4u
1007         * doc/c-avr.texi: Ditto.
1008
1009 2014-03-05  Alan Modra  <amodra@gmail.com>
1010
1011         Update copyright years.
1012
1013 2014-03-05  Alan Modra  <amodra@gmail.com>
1014
1015         * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1016         (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1017
1018 2014-03-05  Alan Modra  <amodra@gmail.com>
1019
1020         * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1021         later.  Merge absolute and relative branch reloc selection.
1022         Generate 16-bit relocs for most 16-bit insn fields given a
1023         non-constant expression.
1024
1025 2014-03-05  Alan Modra  <amodra@gmail.com>
1026
1027         * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1028         (md_assemble): Don't call ppc_is_toc_sym for ELF.
1029
1030 2014-03-04  Heiher  <r@hev.cc>
1031
1032         * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1033         Loongson-3A.
1034
1035 2014-03-03  Nick Clifton  <nickc@redhat.com>
1036
1037         * config/msp430/msp430.c: Replace known mcu array with known
1038         msp430 ISA mcu name array.
1039         Accept any name for -mmcu option.
1040         Add -mz option to warn about missing NOP following an interrupt
1041         status change.
1042         (check_for_nop): New.
1043         (msp430_operands): Emit a warning, if requested, when an interrupt
1044         changing instruction is not followed by a NOP.
1045         * doc/c-msp430.c: Document -mz option.
1046
1047 2014-03-03  Alan Modra  <amodra@gmail.com>
1048
1049         * config/bfin-lex-wrapper.c: Correct copyright date.
1050         * config/obj-fdpicelf.c: Likewise.
1051         * config/obj-fdpicelf.h: Likewise.
1052         * config/tc-frv.c: Correct copyright punctuation.
1053         * config/tc-ip2k.c: Likewise.
1054         * config/tc-iq2000.c: Likewise.
1055         * config/tc-mep.c: Likewise.
1056         * config/tc-tic4x.c: Likewise.
1057         * config/tc-tic4x.h: Likewise.
1058
1059 2014-03-01  Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1060
1061         * config/tc-avr.c: Remove atxmega16x1.
1062
1063 2014-02-28  Alan Modra  <amodra@gmail.com>
1064
1065         * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1066         field for 64-bit dwarf.
1067
1068 2014-02-21  Ilya Tocar  <ilya.tocar@intel.com>
1069
1070         * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1071         * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1072
1073 2014-02-12  Ilya Tocar  <ilya.tocar@intel.com>
1074
1075         * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1076         * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1077         clflushopt/.clfushopt.
1078
1079 2014-02-10  Alan Modra  <amodra@gmail.com>
1080
1081         * po/POTFILES.in: Regenerate.
1082         * po/gas.pot: Regenerate.
1083
1084 2014-02-03  Sandra Loosemore  <sandra@codesourcery.com>
1085
1086         * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1087         (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1088         %got_hiadj relocation operators.  Sort table and add comment
1089         to explain ordering.
1090         (nios2_fix_adjustable): Test for new relocs.
1091         * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1092         operators.
1093
1094 2014-01-30  Sandra Loosemore  <sandra@codesourcery.com>
1095
1096         * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1097         (nios2_assemble_args_m): Likewise.
1098         (md_assemble): Likewise.
1099
1100 2014-01-24  DJ Delorie  <dj@redhat.com>
1101
1102         * config/tc-msp430.c (msp430_section): Always flag data sections,
1103         regardless of -md.
1104         (msp430_frob_section): New.  Make sure all sections are noticed if
1105         they have content.
1106         (msp430_lcomm): New.  Flag bss if .lcomm is seen.
1107         (msp430_comm): New.  Likewise.
1108         (md_pseudo_table): Add them.
1109         * config/tc-msp430.h (msp430_frob_section): Declare.
1110         (tc_frob_section): Define.
1111
1112 2014-01-23  Nick Clifton  <nickc@redhat.com>
1113
1114         * config/tc-msp430.c (show_mcu_list): Delete.
1115         (md_parse_option): Accept any MCU name.  Accept several more
1116         variants for the -mcpu option.
1117         (md_show_usage): Do not call show_mcu_list.
1118
1119 2014-01-22  DJ Delorie  <dj@redhat.com>
1120
1121         * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1122         * doc/c-msp430.texi (MSP430 Directives): Document it.
1123
1124 2014-01-22  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>
1125
1126         * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1127         gather assert.
1128
1129 2014-01-22  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>
1130
1131         PR gas/16489
1132         * config/tc-i386.c (check_VecOperands): Add check for invalid
1133         register set in AVX512 gathers.
1134
1135 2014-01-22  Alan Modra  <amodra@gmail.com>
1136
1137         * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1138
1139 2014-01-21  DJ Delorie  <dj@redhat.com>
1140
1141         * config/tc-rl78.c (require_end_of_expr): New.
1142         (md_operand): Call it.
1143         (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1144         as not overflowing.
1145
1146 2014-01-17  Will Newton  <will.newton@linaro.org>
1147
1148         * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1149         for the s32.f64 flavours of VCVT.
1150
1151 2014-01-14  Nick Clifton  <nickc@redhat.com>
1152
1153         PR gas/16434
1154         * config/tc-z80.c (wrong_match): Provide format string to
1155         as_warn.
1156         (parse_exp_not_indexed): Delete unused variable dummy.
1157         (emit_byte): Delete unused variable fixp.
1158
1159 2014-01-08  H.J. Lu  <hongjiu.lu@intel.com>
1160
1161         * config/tc-i386.c (regbnd): Removed.
1162         (vec_disp8): Likewise.
1163
1164 2014-01-08  H.J. Lu  <hongjiu.lu@intel.com>
1165
1166         * as.c (parse_args): Update copyright year to 2014.
1167
1168 2014-01-07  Tom Tromey  <tromey@redhat.com>
1169
1170         * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1171         wrappers.
1172
1173 2014-01-07  Tom Tromey  <tromey@redhat.com>
1174
1175         * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1176         use PARAMS.
1177
1178 2014-01-07  Tom Tromey  <tromey@redhat.com>
1179
1180         * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1181
1182 2013-01-07  Philipp Tomsich  <philipp.tomsich@theobroma-systems.com>
1183
1184         * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1185
1186 For older changes see ChangeLog-2013
1187 \f
1188 Copyright (C) 2014 Free Software Foundation, Inc.
1189
1190 Copying and distribution of this file, with or without modification,
1191 are permitted in any medium without royalty provided the copyright
1192 notice and this notice are preserved.
1193
1194 Local Variables:
1195 mode: change-log
1196 left-margin: 8
1197 fill-column: 74
1198 version-control: never
1199 End: