1 2014-09-15 H.J. Lu <hongjiu.lu@intel.com>
3 * config/tc-i386.c (OPTION_omit_lock_prefix): Renamed to ...
4 (OPTION_OMIT_LOCK_PREFIX): This.
5 (md_longopts): Updated.
6 (md_parse_option): Likewise.
8 2014-09-15 Andrew Bennett <andrew.bennett@imgtec.com>
9 Matthew Fortune <matthew.fortune@imgtec.com>
11 * config/tc-mips.c (mips_nan2008): New static global.
12 (mips_flag_nan2008): Removed.
13 (LL_SC_FMT): New define.
15 (ISA_IS_R6): New define.
16 (ISA_HAS_64BIT_REGS): Add mips64r6.
17 (ISA_HAS_DROR): Likewise.
18 (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
19 (ISA_HAS_ROR): Likewise.
20 (ISA_HAS_ODD_SINGLE_FPR): Likewise.
21 (ISA_HAS_MXHC1): Likewise.
22 (hilo_interlocks): Likewise.
23 (md_longopts): Likewise.
24 (ISA_HAS_LEGACY_NAN): New define.
25 (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
26 (mips_ase): Add field rem_rev.
27 (mips_ases): Updated to add which ISA an ASE was removed in.
28 (mips_isa_rev): Add support for mips32r6 and mips64r6.
29 (mips_check_isa_supports_ase): Add support to check if an ASE
30 has been removed in the specified MIPS ISA revision.
31 (validate_mips_insn): Skip '-' character.
32 (macro_build): Likewise.
33 (mips_check_options): Prevent R6 working with fp32, mips16,
34 micromips, or branch relaxation.
35 (file_mips_check_options): Set R6 floating point registers to
36 64 bit. Also deal with the nan2008 option.
37 (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
38 BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
39 BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
41 (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
43 (match_check_prev_operand): New static function.
44 (match_same_rs_rt_operand): New static function.
45 (match_non_zero_reg_operand): New static function.
46 (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
48 (insns_between): Added case to deal with forbidden slots.
49 (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
50 and BFD_RELOC_MIPS_26_PCREL_S2.
51 (match_insn): Add support for operands -A, -B, +' and +". Also
53 (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
54 (md_parse_option): Add support for mips32r6 and mips64r6. Also
55 update the nan option handling.
56 (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
57 BFD_RELOC_MIPS_26_PCREL_S2.
58 (mips_force_relocation): Prevent forced relaxation for MIPS r6.
59 (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
60 BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
61 BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
63 (s_mipsset): Add support for mips32r6 and mips64r6.
64 (s_nan): Update to support the new nan2008 framework.
65 (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
66 BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
67 BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
69 (mips_elf_final_processing): Updated to use the mips_nan2008.
70 (mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
71 (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
73 (mips_fix_adjustable): Make PC relative R6 relocations relative
74 to the symbol and not the section.
75 * configure.ac: Add support for mips32r6 and mips64r6.
76 * configure: Regenerate.
77 * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
79 * doc/as.texinfo: Likewise.
81 2014-09-15 Matthew Fortune <matthew.fortune@imgtec.com>
83 * tc-mips.c (check_fpabi): Move softfloat and singlefloat
86 2014-09-12 Jose E. Marchesi <jose.marchesi@oracle.com>
88 * config/tc-sparc.c (sparc_ip): Update the set of allowed hwcaps
89 when bumping the current architecture.
90 (md_begin): Adjust the highetst architecture level also when a
91 specific architecture is not requested.
93 2014-09-12 Andrew Bennett <andrew.bennett@imgtec.com>
95 * configure.tgt: Add mips*-img-elf* target triple.
97 2014-09-12 Alan Modra <amodra@gmail.com>
99 * config/tc-i386.c (match_template): Remove redundant "!!" testing
100 single-bit bitfields.
101 (build_modrm_byte): Don't compare single-bit bitfields to "1".
103 2014-09-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
105 * config/tc-arm.c (arm_cpus): Add cortex-a17.
107 2014-09-03 Jiong Wang <jiong.wang@arm.com>
109 * config/tc-aarch64.c (parse_sys_reg): Remove the restriction on op0
112 2014-09-03 Jiong Wang <jiong.wang@arm.com>
114 * config/tc-aarch64.c (parse_operands): Recognize PAIRREG.
115 (aarch64_features): Add entry for lse extension.
117 2014-08-26 Jiong Wang <jiong.wang@arm.com>
119 * config/tc-arm.c (aeabi_set_public_attributes): Update selected_cpu
120 based on the info we got during parsing.
121 (arm_handle_align): Make sure the p2align expanding logic under thumb
124 2014-08-26 Maciej W. Rozycki <macro@codesourcery.com>
126 * config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
128 <M_SAAD_AB>: ... here. Assert that !microMIPS.
130 2014-08-26 Jan-Benedict Glaw <jbglaw@lug-owl.de>
132 * config/tc-moxie.h (md_convert_frag): Silence warning.
134 2014-08-22 Richard Henderson <rth@redhat.com>
136 * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
137 register number for vector register types.
138 * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
139 (DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
141 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
143 * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
144 flag if both the processor and opcode flags match.
146 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
148 * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
150 2014-08-20 Maciej W. Rozycki <macro@codesourcery.com>
152 * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
153 (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
154 (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
156 2014-08-20 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
158 * config/tc-arm.c (parse_ifimm_zero): New function.
159 (enum operand_parse_code): Add OP_RSVD_FI0 value.
160 (parse_operands): Handle OP_RSVD_FI0.
161 (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
163 2014-08-20 Alan Modra <amodra@gmail.com>
165 * Makefile.am: Typo fix.
166 * Makefile.in: Regenerate.
167 * po/POTFILES.in: Regenerate.
169 2014-08-19 Andreas Tobler <andreast@fgznet.ch>
171 * Makefile.am: Add FreeBSD ARM support.
172 * Mafefile.in: Regenerate.
173 * configure.tgt: Add FreeBSD ARM support.
174 * config/te-armfbsdeabi.h: New file.
175 * config/te-armfbsdvfp.h: Likewise.
177 2014-08-19 Alan Modra <amodra@gmail.com>
179 * configure: Regenerate.
181 2014-08-18 Nick Clifton <nickc@redhat.com>
183 * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
184 RELOC_RL78_DIFF fixups.
186 2014-08-18 Alan Modra <amodra@gmail.com>
188 * read.c (parse_mri_cons): Warning fix.
190 2014-08-14 Alan Modra <amodra@gmail.com>
192 * configure.ac: Move ACX_LARGEFILE after LT_INIT.
193 * config.in: Regenerate.
194 * configure: Regenerate.
196 2014-08-06 Ilya Tocar <ilya.tocar@intel.com>
198 * config/tc-i386.c (omit_lock_prefix): New.
199 (output_insn): Omit lock prefix if omit_lock_prefix is true.
200 (OPTION_omit_lock_prefix): New.
201 (md_longopts): Add momit-lock-prefix.
202 (md_parse_option): Handle momit-lock-prefix.
203 (md_show_usage): Add momit-lock-prefix=[no|yes].
204 * doc/c-i386.texi (momit-lock-prefix): Document.
206 2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com>
209 * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
212 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
214 * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
215 and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
217 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
219 * config/tc-mips.c (mips_flags_frag): New static global.
220 (struct mips_set_options): Add oddspreg field.
221 (file_mips_opts, mips_opts): Initialize oddspreg.
222 (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
224 (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
225 and -mno-odd-spreg options.
226 (md_begin): Create .MIPS.abiflags section.
227 (fpabi_incompatible_with, fpabi_requires): New static function.
228 (check_fpabi): Likewise.
229 (mips_check_options): Handle fp=xx and oddspreg restrictions.
230 (file_mips_check_options): Set oddspreg by default for fp=xx.
231 (mips_oddfpreg_ok): Re-write function.
232 (check_regno): Check odd numbered registers regardless of FPR size.
233 For fp != 32 use as_bad instead of as_warn.
234 (match_float_constant): Rewrite check regarding FP register width. Add
235 support for generating constants when MXHC1 is present. Handle fp=xx
236 to comply with the ABI.
237 (macro): Update M_LI_DD similarly to match_float_constant. Generate
238 MTHC1 when available. Check that correct code can be generated for
239 fp=xx and fp=64 ABIs.
240 (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
242 (mips_convert_ase_flags): New static function.
243 (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
244 to determine when to add the EF_MIPS_FP64 flag. Populate the
245 .MIPS.abiflags section.
246 (md_mips_end): Update .gnu_attribute based on command line and .module
247 as applicable. Use check_fpabi to ensure .gnu.attribute and command
248 line/.module options are consistent.
249 * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
250 -mfpxx, -modd-spreg and -mno-odd-spreg options.
251 * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
252 gnu_attribute values and FP ABIs.
254 2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com>
256 Add RTEMS target support and simplify matching
258 * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
259 (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
261 2014-07-27 Anthony Green <green@moxielogic.com>
263 * configure.tgt (generic_target): Add moxie-*-moxiebox*
264 * config/tc-moxie.c: Remove moxie_target_format.
265 (md_begin): Set default target_big_endian.
266 * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
267 (TARGET_FORMAT): Set based on target_big_endian.
269 2014-07-26 Alan Modra <amodra@gmail.com>
271 * config/bfin-parse.y: Don't include obstack.h.
272 * config/obj-aout.c: Likewise.
273 * config/obj-coff.c: Likewise.
274 * config/obj-som.c: Likewise.
275 * config/tc-bfin.c: Likewise.
276 * config/tc-i960.c: Likewise.
277 * config/tc-rl78.c: Likewise.
278 * config/tc-rx.c: Likewise.
279 * config/tc-tic4x.c: Likewise.
281 * listing.c: Likewise.
282 * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
283 * config/tc-aarch64.c (symbol_locate): Likewise.
284 * config/tc-arm.c (symbol_locate): Likewise.
285 * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
286 * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
287 (s3_build_dependency_insn_hsh): Likewise.
288 * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
289 (s7_build_dependency_insn_hsh): Likewise.
290 * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
291 (frag_new): Make parameter a size_t.
292 (frag_var_init): Make max_chars and var parameters size_t.
293 (frag_var, frag_variant): Likewise.
294 (frag_room): Return a size_t.
295 (frag_align_pattern): Make n_fill parameter a size_t.
296 * frags.h: Update function prototypes.
297 * symbols.c (save_symbol_name): Make name_length a size_t.
299 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
300 Alexander Ivchenko <alexander.ivchenko@intel.com>
301 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
302 Sergey Lega <sergey.s.lega@intel.com>
303 Anna Tikhonova <anna.tikhonova@intel.com>
304 Ilya Tocar <ilya.tocar@intel.com>
305 Andrey Turetskiy <andrey.turetskiy@intel.com>
306 Ilya Verbin <ilya.verbin@intel.com>
307 Kirill Yukhin <kirill.yukhin@intel.com>
308 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
310 * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
311 * doc/c-i386.texi: Document avx512dq/.avx512dq.
313 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
314 Alexander Ivchenko <alexander.ivchenko@intel.com>
315 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
316 Sergey Lega <sergey.s.lega@intel.com>
317 Anna Tikhonova <anna.tikhonova@intel.com>
318 Ilya Tocar <ilya.tocar@intel.com>
319 Andrey Turetskiy <andrey.turetskiy@intel.com>
320 Ilya Verbin <ilya.verbin@intel.com>
321 Kirill Yukhin <kirill.yukhin@intel.com>
322 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
324 * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
325 * doc/c-i386.texi: Document avx512bw/.avx512bw.
327 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
328 Alexander Ivchenko <alexander.ivchenko@intel.com>
329 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
330 Sergey Lega <sergey.s.lega@intel.com>
331 Anna Tikhonova <anna.tikhonova@intel.com>
332 Ilya Tocar <ilya.tocar@intel.com>
333 Andrey Turetskiy <andrey.turetskiy@intel.com>
334 Ilya Verbin <ilya.verbin@intel.com>
335 Kirill Yukhin <kirill.yukhin@intel.com>
336 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
338 * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
339 (build_vex_prefix): Don't abort on VEX.W.
340 (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
341 (check_VecOperations): Ditto.
342 * doc/c-i386.texi: Document avx512vl/.avx512vl.
344 2014-07-21 Joel Sherrill <joel.sherrill@oarcorp.com>
346 Add or reactivate or1k-*-rtems*
347 * gas/configure.tgt (or1k-*-rtems*): Add.
349 2014-07-17 Ilya Tocar <ilya.tocar@intel.com>
351 * config/tc-i386.c (parse_register): Set need_vrex.
353 2014-07-15 Jiong Wang <jiong.wang@arm.com>
355 * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
356 sign extension. Casting the type of imm1 and imm2 to offsetT. Fix
357 one logic error when checking X_op.
359 2014-07-14 Andreas Schwab <schwab@linux-m68k.org>
361 * config/tc-m68k.c (md_convert_frag_1): Don't complain with
362 --pcrel about TAB (DBCCLBR, LONG) conversion.
364 2014-07-12 David Majnemer <david.majnemer@gmail.com>
366 * read.c (assign_symbol): Don't force "set" symbols local for PE.
368 2014-07-08 Jiong Wang <jiong.wang@arm.com>
370 * config/tc-arm.c (literal_pool): New field "alignment".
371 (find_or_make_literal_pool): Initialize "alignment" to 2.
372 (s_ltorg): Align the pool using value of "alignment"
373 (parse_big_immediate): New parameter "in_exp". Return
374 parsed expression if "in_exp" is not null.
375 (parse_address_main): Invoke "parse_big_immediate" for
377 (add_to_lit_pool): Add one parameter 'nbytes'.
378 Split 8 byte entry into two 4 byte entry.
379 Add padding to align 8 byte entry to 8 byte boundary.
380 (encode_arm_cp_address): Generate literal pool entry if possible.
381 (move_or_literal_pool): Generate entry for vldr case.
382 (enum lit_type): New enum type.
383 (do_ldst): Use new enum type.
384 (do_ldstv4): Likewise.
385 (do_t_ldst): Likewise.
386 (neon_write_immbits): Support Thumb-2 mode.
388 2014-07-07 Barney Stratford <barney_stratford@fastmail.fm>
390 * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
391 name as [xyz][hl]. Permit using a symbol whoes name begins with
392 ‘r’ to refer to a register.
393 Allow arbitrary expressions for the P and p operators.
394 (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
395 BFD_RELOC_AVR_PORT6 relocations.
397 2014-07-04 Alan Modra <amodra@gmail.com>
399 * doc/internals.texi: Update "configure.in" comments.
400 * acinclude.m4: Likewise.
401 * config/tc-sparc.c: Likewise.
403 2014-07-04 Alan Modra <amodra@gmail.com>
405 * configure.ac: Rename from configure.in.
406 * Makefile.in: Regenerate.
407 * config.in: Regenerate.
408 * doc/Makefile.in: Regenerate.
410 2014-07-04 Alan Modra <amodra@gmail.com>
412 * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
413 * doc/Makefile.in: Regenerate.
415 2014-07-04 Alan Modra <amodra@gmail.com>
417 * configure.in: Include bfd/version.m4.
418 (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
419 (BFD_VERSION): Delete.
420 * configure.com: Get bfd version from bfd/version.m4.
421 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
422 * configure: Regenerate.
423 * Makefile.in: Regenerate.
424 * doc/Makefile.in: Regenerate.
426 2014-07-01 Barney Stratford <barney_stratford@fastmail.fm>
427 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
428 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
429 Soundararajan <Sounderarajan.D@atmel.com>
431 * config/tc-avr.c (mcu_types): Add avrtiny arch.
432 Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
434 (md_show_usage): Add avrtiny arch in usage message.
435 (avr_operand): validate and issue error for invalid register for
437 add new reloc exp for 16 bit lds/sts instruction.
438 (md_apply_fix): check 16 bit lds/sts operand for out of range and
440 (md_assemble): check ISA for arch and issue diagnostic.
441 * NEWS: Mention new support.
442 * doc/c-avr.texi: Document support for avrtiny architecture.
444 2014-06-27 Alan Modra <amodra@gmail.com>
446 * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
447 SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
448 (obj_mach_o_frob_label): Avoid cascading errors.
449 (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
451 2014-06-18 DJ Delorie <dj@redhat.com>
453 * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
456 2014-06-17 Hans-Peter Nilsson <hp@bitrange.com>
458 * config/tc-mmix.c (loc_assert_s): New member frag.
460 (mmix_md_end): If an error is reported for a LOC expression, patch
463 2014-06-17 Chris Metcalf <cmetcalf@tilera.com>
466 * macro.c (buffer_and_nest): Honour #line directives inside
469 2014-06-17 Jiong Wang <jiong.wang@arm.com>
471 * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
473 2014-06-17 Hans-Peter Nilsson <hp@axis.com>
475 * config/tc-cris.c (cris_bad): New function.
476 (cris_process_instruction): Where applicable, use it instead of
479 2014-06-16 Nick Clifton <nickc@redhat.com>
481 * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
483 2014-06-16 Jiong Wang <jiong.wang@arm.com>
485 * config/tc-aarch64.c (END_OF_INSN): New macro.
486 (parse_operands): Handle operand given and in wrong format when
489 2014-06-16 Alan Modra <amodra@gmail.com>
491 * write.h (subsegs_finish): Delete declaration.
492 * write.c (subsegs_finish): Make static.
493 (write_object_file): Call subsegs_finish from here. Don't print
494 warning and error count here..
495 * as.c (main): ..do so here instead. Remove dead code for "no
496 object file generated". Split out count strings to better support
497 internationalisation. Don't call subsegs_finish. Tidy setting of
498 "keep_it". Run write_object_file even after errors.
499 (keep_it): Make static.
500 * config/obj-elf.c (elf_frob_symbol): Remove assert.
501 (elf_frob_file_before_adjust): Likewise.
503 2014-06-16 Alan Modra <amodra@gmail.com>
505 * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
508 2014-06-16 Alan Modra <amodra@gmail.com>
510 * config/tc-i386.c (reloc): Don't avoid pcrel check for
511 BFD_RELOC_SIZE64. Return NO_RELOC on failing pcrel check.
513 2014-06-16 Alan Modra <amodra@gmail.com>
515 * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
516 (tic6x_output_exidx_entry): Likewise.
517 (md_apply_fix): Simplify 1 byte md_number_to_chars.
519 2014-06-16 Alan Modra <amodra@gmail.com>
521 * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
522 end of archive to temp file.
523 (tic54x_start_line_hook): Start scan for parallel on next line,
524 not one char into next line (which may overrun the buffer).
526 2014-06-16 Alan Modra <amodra@gmail.com>
528 * config/tc-vax.c (md_apply_fix): Rewrite.
529 (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
530 define rather than the equivalent BFD_RELOC_NONE.
532 2014-06-16 Alan Modra <amodra@gmail.com>
534 * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
535 (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
536 and BFD_RELOC_ARM_TLS* relocs. Simplify BFD_RELOC_8 case.
538 2014-06-16 Alan Modra <amodra@gmail.com>
540 * config/tc-cris.c (md_create_long_jump): Follow "short" jump
541 with a nop rather than leaving uninitialised.
543 2014-06-13 Chen Gang <gang.chen.5i5j@gmail.com>
545 * config/tc-score7.c: Replace sprintf with strcpy where
547 (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
549 * config/tc-score.c (s3_relax_branch_inst16): Likewise.
550 (s3_relax_cmpbranch_inst32): Likewise.
552 2014-06-07 Alan Modra <amodra@gmail.com>
554 * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
555 on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
558 2014-06-02 Martin Storsjo <martin@martin.st>
560 * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
562 2014-06-05 Joel Brobecker <brobecker@adacore.com>
564 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
565 bfd's development.sh.
566 * Makefile.in, configure: Regenerate.
568 2014-06-03 Nick Clifton <nickc@redhat.com>
570 * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
571 (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
572 * doc/c-msp430.texi: Update command line option description.
574 2014-05-22 Alan Modra <amodra@gmail.com>
576 * listing.c (listing_warning, listing_error): Add space after colon.
577 * messages.c (as_warn_internal, as_bad_internal): Use the same
580 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
582 * config/tc-mips.c (file_mips_opts_checked): New static global.
583 (s_module): New static function.
585 (mips_pseudo_table): Add .module handler.
586 (mips_set_ase): Add opts argument and use instead of mips_opts.
587 (md_assemble): Use file_mips_check_options.
588 (md_parse_option): Update to use file_mips_opts instead of mips_opts.
589 (mips_set_architecture): Delete function. Moved to...
590 (mips_after_parse_args): Here. All logic now applies to
591 file_mips_opts first and then copies the final state to mips_opts.
592 Move error checking and defaults inference to mips_check_options and
593 file_mips_check_options.
594 (mips_check_options): New static function. Common option checking for
595 command line, .module and .set. Use .module values in error messages
596 instead of refering to command line options.
597 (file_mips_check_options): New static function. A wrapper for
598 mips_check_options with file_mips_opts. Updates BFD arch based on
600 (s_mipsset): Split into s_mipsset and parse_code_option. Settings
601 supported by both .set and .module are moved to parse_code_option.
602 Warnings and errors are kept in s_mipsset because when
603 parse_code_option is used with s_module the warnings are deferred
604 until code is generated. Any setting supporting 'default' value is
605 kept in s_mipsset as it is not applicable to s_module. Inferred
606 settings are also kept in s_mipsset as s_module does not infer any
607 settings. Use mips_check_options.
608 (parse_code_option): New static function derived from s_mipsset.
609 (s_module): New static function that implements .module. Allows file
610 level settings to be changed until code is generated.
611 (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
612 (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
613 (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
614 (md_mips_end): Use file_mips_check_options.
615 * doc/c-mips.texi: Document .module.
617 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
619 * messages.c (as_warn_internal): Remove extra whitespace from
622 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
624 * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
625 (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
627 2014-05-20 Mike Stump <mikestump@comcast.net>
629 * messages.c (as_warn_internal): Ensure we don't interleave output
630 within a single line when make -j is used.
631 (as_bad_internal): Likewise.
633 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
635 * config/obj-elf.h (obj_elf_seen_attribute): Declare.
636 * config/obj-elf.c (recorded_attribute_info): New structure.
637 (recorded_attributes): New variable.
638 (record_attribute, obj_elf_seen_attribute): New functions.
639 (obj_elf_vendor_attribute): Record which attributes have been seen.
641 2014-05-20 Nick Clifton <nickc@redhat.com>
643 * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
644 Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
645 (msp430_srcoperand): Store vshift value in operand.
647 2014-05-19 Nick Clifton <nickc@redhat.com>
650 * config/tc-i386.c (md_apply_fix): Improve the detection of code
651 symbols for 32-bit PE targets.
653 2014-05-18 Richard Sandiford <rdsandiford@googlemail.com>
655 * config/tc-mips.c (md_obj_begin): Delete.
656 (md_obj_end): Fold into...
657 (md_mips_end): ...here. Move to end of file.
659 2014-05-17 Nick Clifton <nickc@redhat.com>
662 * config/tc-v850.c (handle_ctoff): Generate an error if called
663 when using the RH850 ABI.
665 2014-05-16 Kaushik Phata <Kaushik.Phatak@kpit.com>
667 * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
668 and OPTION_64BIT_DOUBLES.
669 (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
670 (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
671 (md_show_usage): Show all of the RL78 options.
672 (rl78_float_cons): New static functions.
673 (md_pseudo_table): Update handler for "double".
674 * doc/c-rl78.texi: Document new options.
675 * doc/as.texinfo: Likewise.
677 2014-05-13 Matthew Fortune <matthew.fortune@imgtec.com>
679 * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
680 (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
681 (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
682 (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
684 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
686 * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
689 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
691 * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
692 Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
693 (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
694 file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
696 (file_mips_opts): Here. New static global. Update throughout.
697 (mips_opts): Update defaults for gp32 and fp.
699 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
701 * config/tc-mips.c (streq): Define.
702 (mips_convert_symbolic_attribute): New function.
703 * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
704 (mips_convert_symbolic_attribute): New prototype.
706 2014-05-02 Max Filippov <jcmvbkbc@gmail.com>
708 * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
711 2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com>
713 * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
715 (ISA_HAS_64BIT_FPRS): Likewise.
716 (ISA_HAS_ROR): Likewise.
717 (ISA_HAS_ODD_SINGLE_FPR): Likewise.
718 (ISA_HAS_MXHC1): Likewise.
719 (hilo_interlocks): Likewise.
720 (md_longopts): Likewise.
721 (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
722 (ISA_HAS_DROR): Likewise.
723 (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
725 (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
727 (md_parse_option): Likewise.
728 (s_mipsset): Likewise.
729 (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
730 and mips64r5. Also change p5600 entry to be mips32r5.
731 * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
733 * configure: Regenerate.
734 * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
735 -mips64r5 command line options.
736 * doc/as.texinfo: Likewise.
738 2014-04-28 Nick Clifton <nickc@redhat.com>
741 * config/tc-i386.c (md_apply_fix): Do not adjust value of
742 pc-relative fixes against weak symbols.
744 2014-04-26 Alan Modra <amodra@gmail.com>
746 * po/POTFILES.in: Regenerate.
748 2014-04-24 Nick Clifton <nickc@redhat.com>
750 * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
753 2014-04-23 Will Newton <will.newton@linaro.org>
755 * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
756 directly instead of mapping_state.
758 2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com>
760 * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
761 (md_longopts): Add xpa and no-xpa command line options.
762 (mips_ases): Add MIPS XPA ASE.
763 (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
764 * doc/as.texinfo: Document the MIPS XPA command line options.
765 * doc/c-mips.texi: Document the MIPS XPA command line options,
766 and assembler directives.
768 2014-04-22 Sandra Loosemore <sandra@codesourcery.com>
770 * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
771 unbreak self-test mode.
773 2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
775 * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
778 2014-04-22 Christian Svensson <blue@cmd.nu>
780 * Makefile.am: Remove openrisc and or32 support. Add support for or1k.
781 * configure.in: Likewise.
782 * configure.tgt: Likewise.
783 * doc/as.texinfo: Likewise.
784 * config/obj-coff.h: Likewise.
785 * config/tc-or1k.c: New file.
786 * config/tc-or1k.h: New file.
787 * config/tc-openrisc.c: Delete.
788 * config/tc-openrisc.h: Delete.
789 * config/tc-or32.c: Delete.
790 * config/tc-or32.h: Delete.
791 * Makefile.in: Regenerate.
792 * configure: Regenerate.
794 2014-04-16 Alan Modra <amodra@gmail.com>
796 * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
797 * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
799 2014-04-10 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
801 * config/tc-avr.c: Add new flag mlink-relax.
802 (md_show_usage): Add flag and help text.
803 (md_parse_option): Record whether link relax is turned on.
804 (relaxable_section): New.
805 (avr_validate_fix_sub): New.
806 (avr_force_relocation): New.
807 (md_apply_fix): Generate DIFF reloc.
808 (avr_allow_local_subtract): New.
810 * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
811 (TC_FORCE_RELOCATION): Define.
812 (TC_FORCE_RELOCATION_SUB_SAME): Define.
813 (TC_VALIDATE_FIX_SUB): Define.
814 (avr_force_relocation): Declare.
815 (avr_validate_fix_sub): Declare.
816 (md_allow_local_subtract): Define.
817 (avr_allow_local_subtract): Declare.
819 2014-04-10 Andrew Bennett <andrew.bennett@imgtec.com>
821 * config/tc-mips.c (mips_cpu_info_table): Add P5600
823 * doc/c-mips.texi: Document p5600.
825 2014-04-09 Nick Clifton <nickc@redhat.com>
827 * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
828 * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
829 * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
830 * read.c (emit_expr_fix): Mark the r parameter as potentially
833 2014-04-09 Alan Modra <amodra@gmail.com>
835 * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
837 (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
838 (ppc_elf_cons_fix_check): New function.
839 (md_assemble): Set last_insn, last_seg, last_subseg.
840 (ppc_byte, md_apply_fix): Handle warn_476.
841 * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
842 (ppc_elf_cons_fix_check): Declare.
843 * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
845 2014-04-09 Alan Modra <amodra@gmail.com>
847 * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
848 * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
849 * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
850 (TC_CONS_FIX_NEW): Add RELOC parameter.
851 * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
852 * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
853 * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
854 * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
855 * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
856 * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
857 * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
858 * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
859 * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
861 * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
862 * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
863 * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
864 * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
865 * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
866 * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
867 * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
868 * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
869 * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
870 * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
872 * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
873 * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
875 * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
876 * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
877 * gas/config/tc-avr.c (exp_mod_data): Make global.
878 (pexp_mod_data): Delete.
879 (avr_parse_cons_expression): Return exp_mod_data pointer.
880 (avr_cons_fix_new): Add exp_mod_data_t pointer param.
881 (exp_mod_data_t): Move typedef..
882 * gas/config/tc-avr.h: ..to here.
883 (exp_mod_data): Declare.
884 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
885 (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
886 (TC_CONS_FIX_NEW): Update.
887 * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
888 (cons_fix_new_hppa): Add hppa_field_selector param.
889 (fix_new_hppa): Adjust.
890 (parse_cons_expression_hppa): Return field selector.
891 * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
892 (cons_fix_new_hppa): Likewise.
893 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
894 * gas/config/tc-i386.c (got_reloc): Delete static var.
895 (x86_cons_fix_new): Add reloc param.
896 (x86_cons): Return got reloc.
897 * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
898 (TC_CONS_FIX_NEW): Add RELOC param.
899 * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param. Adjust
901 * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
902 (TC_CONS_FIX_NEW): Add reloc param.
903 * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
905 (cons_fix_new_microblaze): Add reloc param.
906 * gas/config/tc-microblaze.h: Formatting.
907 (parse_cons_expression_microblaze): Update proto.
908 (cons_fix_new_microblaze): Likewise.
909 * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
910 (nios2_cons): Return ldo reloc.
911 (nios2_cons_fix_new): Delete.
912 * gas/config/tc-nios2.h (nios2_cons): Update prototype.
913 (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
914 * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
915 short. Make llong use cons.
916 (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
917 (ppc_elf_cons): Delete.
918 (ppc_elf_parse_cons): New function.
919 (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
920 (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
921 * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
922 (ppc_elf_parse_cons): Declare.
923 * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
924 (sparc_cons): Return reloc specifier.
925 (cons_fix_new_sparc): Add reloc specifier param.
926 (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
927 * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
928 (TC_PARSE_CONS_RETURN_NONE): Define.
929 (sparc_cons, cons_fix_new_sparc): Update prototype.
930 * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
931 (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
932 (md_assemble): Likewise.
933 (parse_cons_expression_v850): Return reloc.
934 (cons_fix_new_v850): Add reloc parameter.
935 * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
936 (cons_fix_new_v850): Likewise.
937 * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
938 (vax_cons): Return reloc.
939 (vax_cons_fix_new): Add reloc parameter.
940 * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
941 * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
942 * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
943 * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
944 (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
945 * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
946 (do_parse_cons_expression): Adjust.
947 (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
948 to emit_expr_with_reloc.
949 (emit_expr_with_reloc): New function handling reloc, mostly
952 (emit_expr_fix): Add reloc param. Adjust TC_CONS_FIX_NEW invocation.
954 (parse_mri_cons): Convert to ISO.
955 * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
956 (TC_PARSE_CONS_RETURN_NONE): Define.
957 (emit_expr_with_reloc): Declare.
958 (emit_expr_fix): Update prototype.
959 * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
961 2014-04-03 Ilya Tocar <ilya.tocar@intel.com>
963 * config/tc-i386.c (cpu_arch): Add .se1.
964 * doc/c-i386.texi: Document .se1/se1.
966 2014-04-02 DJ Delorie <dj@redhat.com>
968 * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
969 pc-relative branches.
971 2014-04-02 Nick Clifton <nickc@redhat.com>
974 * config/tc-arm.c (create_unwind_entry): Report an error if an
975 attempt to recreate an unwind directive is encountered.
977 2014-03-27 Nick Clifton <nickc@redhat.com>
979 * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
980 sprintf in order to avoid a compile time warning.
982 2014-03-26 Nick Clifton <nickc@redhat.com>
984 * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
985 relocation is used on an 8-bit operand or vice versa.
986 (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
987 (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
989 2014-03-25 Nick Clifton <nickc@redhat.com>
991 * config/obj-coff-seh.c (obj_coff_seh_code): New function -
992 switches the current segment back to the code segment recorded
993 when seh_proc was last invoked.
994 * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
996 2014-03-25 Alan Modra <amodra@gmail.com>
998 * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
999 (md_assemble): Likewise. Warn.
1001 2014-03-21 David Weatherford <weath@cadence.com>
1002 Max Filippov <jcmvbkbc@gmail.com>
1004 * config/tc-xtensa.c (xtensa_check_frag_count)
1005 xtensa_create_trampoline_frag,
1006 xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
1007 find_trampoline_seg, search_trampolines, get_best_trampoline,
1008 check_and_update_trampolines, add_jump_to_trampoline,
1009 dump_trampolines): New functions.
1010 (md_parse_option): Add cases for --[no-]trampolines options.
1011 (md_assemble, finish_vinsn, xtensa_end): Add call to
1012 xtensa_check_frag_count.
1013 (xg_assemble_vliw_tokens): Add call to
1014 xtensa_maybe_create_trampoline_frag.
1015 (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
1016 (relax_frag_immed): Relax jump instructions that cannot reach its
1018 * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
1020 * doc/as.texinfo: Document --[no-]trampolines command-line options.
1021 * doc/c-xtensa.texi: Document trampolines relaxation and command
1023 * frags.c (get_frag_count, clear_frag_count): New function.
1024 (frag_alloc): Increment totalfrags counter.
1025 * frags.h (get_frag_count, clear_frag_count): New function.
1027 2014-03-20 DJ Delorie <dj@redhat.com>
1029 * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
1030 * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
1032 * config/tc-rl78.h (md_relax_frag): Define.
1033 (rl78_relax_frag): Declare.
1034 * config/tc-rl78.c (rl78_relax): Add.
1035 (md_assemble): Set up the variable frags also when relaxing.
1037 (rl78_opcode_type): New.
1038 (rl78_frag_fix_value): New.
1039 (md_estimate_size_before_relax): New-ish.
1040 (rl78_relax_frag): New.
1041 (md_convert_frag): New-ish.
1043 2014-03-20 Richard Sandiford <rdsandiford@googlemail.com>
1045 * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
1046 * config/tc-mips.c (md_pcrel_from): Remove error message.
1047 (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
1048 BFD_RELOC_32_PCREL. Report a specific error message for unhandled
1049 PC-relative expressions. Handle BFD_RELOC_8.
1051 2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com>
1053 * config/tc-sparc.c (hpriv_reg_table): Added entries for
1054 %hstick_offset and %hstick_enable.
1055 * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
1056 %hstick_enable hyperprivileged registers.
1058 2014-03-19 Daniel Gutson <daniel.gutson@tallertechnologies.com>
1059 Nick Clifton <nickc@redhat.com>
1061 * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
1062 CCS syntax compatibility mode is on or off.
1063 (asmfunc_states): New enum to represent the asmfunc directive state.
1064 (asmfunc_state): New variable holding the asmfunc directive state.
1065 (comment_chars): Rename to arm_comment_chars.
1066 (line_separator_chars): Rename to arm_line_separator_chars.
1067 (s_ccs_ref): New function that handles the .ref directive.
1068 (asmfunc_debug): New function.
1069 (s_ccs_asmfunc): New function that handles the .asmfunc directive.
1070 (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
1071 (s_ccs_def): New function that handles the .def directive.
1072 (tc_start_label_without_colon): New function.
1073 (md_pseudo_table): Added new CCS directives.
1074 (arm_ccs_mode): New function that handles the -mccs command line option.
1075 (arm_long_opts): Added new -mccs command line option.
1076 * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
1077 (TC_START_LABEL_WITHOUT_COLON): New macro.
1078 (tc_start_label_without_colon): Added extern function declaration.
1079 (tc_comment_chars): Define.
1080 (tc_line_separator_chars): Define.
1081 * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
1082 * read.c (read_begin): Likewise.
1083 * doc/as.texinfo: Add documentation for the -mccs command line
1085 * doc/c-arm.texi: Likewise.
1086 * doc/internals.texi: Document tc_line_separator_chars.
1087 * NEWS: Mention the new feature.
1089 2014-03-18 Jiong Wang <jiong.wang@arm.com>
1091 * config/tc-aarch64.c (aarch64_opts): Add new option
1092 "mno-verbose-error".
1093 (verbose_error_p): Initialize to 1.
1094 * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
1095 and -mno-verbose-error.
1097 2014-03-17 Nick Clifton <nickc@redhat.com>
1100 * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
1103 2014-03-13 Richard Earnshaw <rearnsha@arm.com>
1104 Jiong Wang <Jiong.Wang@arm.com>
1106 * doc/c-aarch64.texi: Clean up some formatting issues.
1107 (AArch64 Options): Document -mcpu and -march.
1108 (AArch64 Extensions): New node.
1110 2014-03-13 Tristan Gingold <gingold@adacore.com>
1112 * config/tc-i386.c (use_big_obj): Declare.
1113 (OPTION_MBIG_OBJ): Define.
1114 (md_longopts): Add -mbig-obj option.
1115 (md_parse_option): Handle it.
1116 (md_show_usage): Display help for this option.
1117 (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
1118 * doc/c-i386.texi: Document the option.
1120 2014-03-12 Nick Clifton <nickc@redhat.com>
1123 * config/tc-aarch64.c (literal_expression): New structure.
1124 (literal_pool): Replace exp array with literal_expression array.
1125 (add_to_lit_pool): When adding a bignum cache the big value.
1126 (s_ltorg): When emitting a bignum initialise the global bignum
1127 array from the cached value.
1129 2014-03-12 Alan Modra <amodra@gmail.com>
1131 * Makefile.in: Regenerate.
1132 * config.in: Regenerate.
1133 * doc/Makefile.in: Regenerate.
1135 2014-03-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
1136 Vishnu KS <Vishnu.k_s@atmel.com>
1137 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1138 Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
1140 * gas/tc-avr.c: Add new devices
1141 avr25: ata5272, attiny828
1142 avr35: ata5505, attiny1634
1143 avr4: atmega8a, ata6285, ata6286, atmega48pa
1144 avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
1145 atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
1147 avr51: atmega128a, atmega1284
1148 avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1149 atxmega32e5, atxmega16e5, atxmega8e5
1150 avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1151 atxmega64c3, atxmega64d4
1152 avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1153 atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1154 atxmega256c3, atxmega384c3, atxmega384d3
1155 avrxmega7: atxmega128a4u
1156 * doc/c-avr.texi: Ditto.
1158 2014-03-05 Alan Modra <amodra@gmail.com>
1160 Update copyright years.
1162 2014-03-05 Alan Modra <amodra@gmail.com>
1164 * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1165 (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1167 2014-03-05 Alan Modra <amodra@gmail.com>
1169 * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1170 later. Merge absolute and relative branch reloc selection.
1171 Generate 16-bit relocs for most 16-bit insn fields given a
1172 non-constant expression.
1174 2014-03-05 Alan Modra <amodra@gmail.com>
1176 * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1177 (md_assemble): Don't call ppc_is_toc_sym for ELF.
1179 2014-03-04 Heiher <r@hev.cc>
1181 * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1184 2014-03-03 Nick Clifton <nickc@redhat.com>
1186 * config/msp430/msp430.c: Replace known mcu array with known
1187 msp430 ISA mcu name array.
1188 Accept any name for -mmcu option.
1189 Add -mz option to warn about missing NOP following an interrupt
1191 (check_for_nop): New.
1192 (msp430_operands): Emit a warning, if requested, when an interrupt
1193 changing instruction is not followed by a NOP.
1194 * doc/c-msp430.c: Document -mz option.
1196 2014-03-03 Alan Modra <amodra@gmail.com>
1198 * config/bfin-lex-wrapper.c: Correct copyright date.
1199 * config/obj-fdpicelf.c: Likewise.
1200 * config/obj-fdpicelf.h: Likewise.
1201 * config/tc-frv.c: Correct copyright punctuation.
1202 * config/tc-ip2k.c: Likewise.
1203 * config/tc-iq2000.c: Likewise.
1204 * config/tc-mep.c: Likewise.
1205 * config/tc-tic4x.c: Likewise.
1206 * config/tc-tic4x.h: Likewise.
1208 2014-03-01 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1210 * config/tc-avr.c: Remove atxmega16x1.
1212 2014-02-28 Alan Modra <amodra@gmail.com>
1214 * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1215 field for 64-bit dwarf.
1217 2014-02-21 Ilya Tocar <ilya.tocar@intel.com>
1219 * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1220 * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1222 2014-02-12 Ilya Tocar <ilya.tocar@intel.com>
1224 * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1225 * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1226 clflushopt/.clfushopt.
1228 2014-02-10 Alan Modra <amodra@gmail.com>
1230 * po/POTFILES.in: Regenerate.
1231 * po/gas.pot: Regenerate.
1233 2014-02-03 Sandra Loosemore <sandra@codesourcery.com>
1235 * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1236 (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1237 %got_hiadj relocation operators. Sort table and add comment
1238 to explain ordering.
1239 (nios2_fix_adjustable): Test for new relocs.
1240 * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1243 2014-01-30 Sandra Loosemore <sandra@codesourcery.com>
1245 * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1246 (nios2_assemble_args_m): Likewise.
1247 (md_assemble): Likewise.
1249 2014-01-24 DJ Delorie <dj@redhat.com>
1251 * config/tc-msp430.c (msp430_section): Always flag data sections,
1253 (msp430_frob_section): New. Make sure all sections are noticed if
1255 (msp430_lcomm): New. Flag bss if .lcomm is seen.
1256 (msp430_comm): New. Likewise.
1257 (md_pseudo_table): Add them.
1258 * config/tc-msp430.h (msp430_frob_section): Declare.
1259 (tc_frob_section): Define.
1261 2014-01-23 Nick Clifton <nickc@redhat.com>
1263 * config/tc-msp430.c (show_mcu_list): Delete.
1264 (md_parse_option): Accept any MCU name. Accept several more
1265 variants for the -mcpu option.
1266 (md_show_usage): Do not call show_mcu_list.
1268 2014-01-22 DJ Delorie <dj@redhat.com>
1270 * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1271 * doc/c-msp430.texi (MSP430 Directives): Document it.
1273 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1275 * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1278 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1281 * config/tc-i386.c (check_VecOperands): Add check for invalid
1282 register set in AVX512 gathers.
1284 2014-01-22 Alan Modra <amodra@gmail.com>
1286 * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1288 2014-01-21 DJ Delorie <dj@redhat.com>
1290 * config/tc-rl78.c (require_end_of_expr): New.
1291 (md_operand): Call it.
1292 (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1295 2014-01-17 Will Newton <will.newton@linaro.org>
1297 * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1298 for the s32.f64 flavours of VCVT.
1300 2014-01-14 Nick Clifton <nickc@redhat.com>
1303 * config/tc-z80.c (wrong_match): Provide format string to
1305 (parse_exp_not_indexed): Delete unused variable dummy.
1306 (emit_byte): Delete unused variable fixp.
1308 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1310 * config/tc-i386.c (regbnd): Removed.
1311 (vec_disp8): Likewise.
1313 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1315 * as.c (parse_args): Update copyright year to 2014.
1317 2014-01-07 Tom Tromey <tromey@redhat.com>
1319 * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1322 2014-01-07 Tom Tromey <tromey@redhat.com>
1324 * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1327 2014-01-07 Tom Tromey <tromey@redhat.com>
1329 * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1331 2013-01-07 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
1333 * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1335 For older changes see ChangeLog-2013
1337 Copyright (C) 2014 Free Software Foundation, Inc.
1339 Copying and distribution of this file, with or without modification,
1340 are permitted in any medium without royalty provided the copyright
1341 notice and this notice are preserved.
1347 version-control: never