gas/ChangeLog

   1 2014-08-26  Jan-Benedict Glaw  <jbglaw@lug-owl.de>
   2
   3         * config/tc-moxie.h (md_convert_frag): Silence warning.
   4
   5 2014-08-22  Richard Henderson  <rth@redhat.com>
   6
   7         * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
   8         register number for vector register types.
   9         * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
  10         (DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
  11
  12 2014-08-22  Maciej W. Rozycki  <macro@codesourcery.com>
  13
  14         * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
  15         flag if both the processor and opcode flags match.
  16
  17 2014-08-22  Maciej W. Rozycki  <macro@codesourcery.com>
  18
  19         * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
  20
  21 2014-08-20  Maciej W. Rozycki  <macro@codesourcery.com>
  22
  23         * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
  24         (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
  25         (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
  26
  27 2014-08-20  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
  28
  29         * config/tc-arm.c (parse_ifimm_zero): New function.
  30         (enum operand_parse_code): Add OP_RSVD_FI0 value.
  31         (parse_operands): Handle OP_RSVD_FI0.
  32         (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
  33
  34 2014-08-20  Alan Modra  <amodra@gmail.com>
  35
  36         * Makefile.am: Typo fix.
  37         * Makefile.in: Regenerate.
  38         * po/POTFILES.in: Regenerate.
  39
  40 2014-08-19  Andreas Tobler  <andreast@fgznet.ch>
  41
  42         * Makefile.am: Add FreeBSD ARM support.
  43         * Mafefile.in: Regenerate.
  44         * configure.tgt: Add FreeBSD ARM support.
  45         * config/te-armfbsdeabi.h: New file.
  46         * config/te-armfbsdvfp.h: Likewise.
  47
  48 2014-08-19  Alan Modra  <amodra@gmail.com>
  49
  50         * configure: Regenerate.
  51
  52 2014-08-18  Nick Clifton  <nickc@redhat.com>
  53
  54         * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
  55         RELOC_RL78_DIFF fixups.
  56
  57 2014-08-18  Alan Modra  <amodra@gmail.com>
  58
  59         * read.c (parse_mri_cons): Warning fix.
  60
  61 2014-08-14  Alan Modra  <amodra@gmail.com>
  62
  63         * configure.ac: Move ACX_LARGEFILE after LT_INIT.
  64         * config.in: Regenerate.
  65         * configure: Regenerate.
  66
  67 2014-08-06  Ilya Tocar  <ilya.tocar@intel.com>
  68
  69         * config/tc-i386.c (omit_lock_prefix): New.
  70         (output_insn): Omit lock prefix if omit_lock_prefix is true.
  71         (OPTION_omit_lock_prefix): New.
  72         (md_longopts): Add momit-lock-prefix.
  73         (md_parse_option): Handle momit-lock-prefix.
  74         (md_show_usage): Add momit-lock-prefix=[no|yes].
  75         * doc/c-i386.texi (momit-lock-prefix): Document.
  76
  77 2014-08-01  Takashi Yoshii  <yoshii.takashi@renesas.com>
  78
  79         PR 10378
  80         * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
  81         SWITCH_TABLE case.
  82
  83 2014-07-29  Matthew Fortune  <matthew.fortune@imgtec.com>
  84
  85         * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
  86         and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
  87
  88 2014-07-29  Matthew Fortune  <matthew.fortune@imgtec.com>
  89
  90         * config/tc-mips.c (mips_flags_frag): New static global.
  91         (struct mips_set_options): Add oddspreg field.
  92         (file_mips_opts, mips_opts): Initialize oddspreg.
  93         (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
  94         Loongson-3a.
  95         (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
  96         and -mno-odd-spreg options.
  97         (md_begin): Create .MIPS.abiflags section.
  98         (fpabi_incompatible_with, fpabi_requires): New static function.
  99         (check_fpabi): Likewise.
 100         (mips_check_options): Handle fp=xx and oddspreg restrictions.
 101         (file_mips_check_options): Set oddspreg by default for fp=xx.
 102         (mips_oddfpreg_ok): Re-write function.
 103         (check_regno): Check odd numbered registers regardless of FPR size.
 104         For fp != 32 use as_bad instead of as_warn.
 105         (match_float_constant): Rewrite check regarding FP register width.  Add
 106         support for generating constants when MXHC1 is present.  Handle fp=xx
 107         to comply with the ABI.
 108         (macro): Update M_LI_DD similarly to match_float_constant.  Generate
 109         MTHC1 when available.  Check that correct code can be generated for
 110         fp=xx and fp=64 ABIs.
 111         (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
 112         options.
 113         (mips_convert_ase_flags): New static function.
 114         (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
 115         to determine when to add the EF_MIPS_FP64 flag.  Populate the
 116         .MIPS.abiflags section.
 117         (md_mips_end): Update .gnu_attribute based on command line and .module
 118         as applicable.  Use check_fpabi to ensure .gnu.attribute and command
 119         line/.module options are consistent.
 120         * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
 121         -mfpxx, -modd-spreg and -mno-odd-spreg options.
 122         * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
 123         gnu_attribute values and FP ABIs.
 124
 125 2014-07-27  Joel Sherrill <joel.sherrill@oarcorp.com>
 126
 127         Add RTEMS target support and simplify matching
 128
 129         * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
 130         (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
 131
 132 2014-07-27  Anthony Green  <green@moxielogic.com>
 133
 134         * configure.tgt (generic_target): Add moxie-*-moxiebox*
 135         * config/tc-moxie.c: Remove moxie_target_format.
 136         (md_begin): Set default target_big_endian.
 137         * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
 138         (TARGET_FORMAT): Set based on target_big_endian.
 139
 140 2014-07-26  Alan Modra  <amodra@gmail.com>
 141
 142         * config/bfin-parse.y: Don't include obstack.h.
 143         * config/obj-aout.c: Likewise.
 144         * config/obj-coff.c: Likewise.
 145         * config/obj-som.c: Likewise.
 146         * config/tc-bfin.c: Likewise.
 147         * config/tc-i960.c: Likewise.
 148         * config/tc-rl78.c: Likewise.
 149         * config/tc-rx.c: Likewise.
 150         * config/tc-tic4x.c: Likewise.
 151         * expr.c: Likewise.
 152         * listing.c: Likewise.
 153         * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
 154         * config/tc-aarch64.c (symbol_locate): Likewise.
 155         * config/tc-arm.c (symbol_locate): Likewise.
 156         * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
 157         * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
 158         (s3_build_dependency_insn_hsh): Likewise.
 159         * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
 160         (s7_build_dependency_insn_hsh): Likewise.
 161         * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
 162         (frag_new): Make parameter a size_t.
 163         (frag_var_init): Make max_chars and var parameters size_t.
 164         (frag_var, frag_variant): Likewise.
 165         (frag_room): Return a size_t.
 166         (frag_align_pattern): Make n_fill parameter a size_t.
 167         * frags.h: Update function prototypes.
 168         * symbols.c (save_symbol_name): Make name_length a size_t.
 169
 170 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 171             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 172             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 173             Sergey Lega  <sergey.s.lega@intel.com>
 174             Anna Tikhonova  <anna.tikhonova@intel.com>
 175             Ilya Tocar  <ilya.tocar@intel.com>
 176             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 177             Ilya Verbin  <ilya.verbin@intel.com>
 178             Kirill Yukhin  <kirill.yukhin@intel.com>
 179             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 180
 181         * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
 182         * doc/c-i386.texi: Document avx512dq/.avx512dq.
 183
 184 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 185             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 186             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 187             Sergey Lega  <sergey.s.lega@intel.com>
 188             Anna Tikhonova  <anna.tikhonova@intel.com>
 189             Ilya Tocar  <ilya.tocar@intel.com>
 190             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 191             Ilya Verbin  <ilya.verbin@intel.com>
 192             Kirill Yukhin  <kirill.yukhin@intel.com>
 193             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 194
 195         * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
 196         * doc/c-i386.texi: Document avx512bw/.avx512bw.
 197
 198 2014-07-22  Sergey Guriev  <sergey.s.guriev@intel.com>
 199             Alexander Ivchenko  <alexander.ivchenko@intel.com>
 200             Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
 201             Sergey Lega  <sergey.s.lega@intel.com>
 202             Anna Tikhonova  <anna.tikhonova@intel.com>
 203             Ilya Tocar  <ilya.tocar@intel.com>
 204             Andrey Turetskiy  <andrey.turetskiy@intel.com>
 205             Ilya Verbin  <ilya.verbin@intel.com>
 206             Kirill Yukhin  <kirill.yukhin@intel.com>
 207             Michael Zolotukhin  <michael.v.zolotukhin@intel.com>
 208
 209         * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
 210         (build_vex_prefix): Don't abort on VEX.W.
 211         (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
 212         (check_VecOperations): Ditto.
 213         * doc/c-i386.texi: Document avx512vl/.avx512vl.
 214
 215 2014-07-21  Joel Sherrill  <joel.sherrill@oarcorp.com>
 216
 217         Add or reactivate or1k-*-rtems*
 218         * gas/configure.tgt (or1k-*-rtems*): Add.
 219
 220 2014-07-17  Ilya Tocar  <ilya.tocar@intel.com>
 221
 222         * config/tc-i386.c (parse_register): Set need_vrex.
 223
 224 2014-07-15  Jiong Wang  <jiong.wang@arm.com>
 225
 226         * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
 227         sign extension.  Casting the type of imm1 and imm2 to offsetT.  Fix
 228         one logic error when checking X_op.
 229
 230 2014-07-14  Andreas Schwab  <schwab@linux-m68k.org>
 231
 232         * config/tc-m68k.c (md_convert_frag_1): Don't complain with
 233         --pcrel about TAB (DBCCLBR, LONG) conversion.
 234
 235 2014-07-12  David Majnemer  <david.majnemer@gmail.com>
 236
 237         * read.c (assign_symbol): Don't force "set" symbols local for PE.
 238
 239 2014-07-08  Jiong Wang  <jiong.wang@arm.com>
 240
 241         * config/tc-arm.c (literal_pool): New field "alignment".
 242         (find_or_make_literal_pool): Initialize "alignment" to 2.
 243         (s_ltorg): Align the pool using value of "alignment"
 244         (parse_big_immediate): New parameter "in_exp". Return
 245         parsed expression if "in_exp" is not null.
 246         (parse_address_main): Invoke "parse_big_immediate" for
 247         constant parameter.
 248         (add_to_lit_pool): Add one parameter 'nbytes'.
 249         Split 8 byte entry into two 4 byte entry.
 250         Add padding to align 8 byte entry to 8 byte boundary.
 251         (encode_arm_cp_address): Generate literal pool entry if possible.
 252         (move_or_literal_pool): Generate entry for vldr case.
 253         (enum lit_type): New enum type.
 254         (do_ldst): Use new enum type.
 255         (do_ldstv4): Likewise.
 256         (do_t_ldst): Likewise.
 257         (neon_write_immbits): Support Thumb-2 mode.
 258
 259 2014-07-07  Barney Stratford  <barney_stratford@fastmail.fm>
 260
 261         * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
 262         name as [xyz][hl].  Permit using a symbol whoes name begins with
 263         ‘r’ to refer to a register.
 264         Allow arbitrary expressions for the P and p operators.
 265         (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
 266         BFD_RELOC_AVR_PORT6 relocations.
 267
 268 2014-07-04  Alan Modra  <amodra@gmail.com>
 269
 270         * doc/internals.texi: Update "configure.in" comments.
 271         * acinclude.m4: Likewise.
 272         * config/tc-sparc.c: Likewise.
 273
 274 2014-07-04  Alan Modra  <amodra@gmail.com>
 275
 276         * configure.ac: Rename from configure.in.
 277         * Makefile.in: Regenerate.
 278         * config.in: Regenerate.
 279         * doc/Makefile.in: Regenerate.
 280
 281 2014-07-04  Alan Modra  <amodra@gmail.com>
 282
 283         * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
 284         * doc/Makefile.in: Regenerate.
 285
 286 2014-07-04  Alan Modra  <amodra@gmail.com>
 287
 288         * configure.in: Include bfd/version.m4.
 289         (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
 290         (BFD_VERSION): Delete.
 291         * configure.com: Get bfd version from bfd/version.m4.
 292         * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
 293         * configure: Regenerate.
 294         * Makefile.in: Regenerate.
 295         * doc/Makefile.in: Regenerate.
 296
 297 2014-07-01  Barney Stratford   <barney_stratford@fastmail.fm>
 298             Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 299             Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
 300             Soundararajan  <Sounderarajan.D@atmel.com>
 301
 302         * config/tc-avr.c (mcu_types): Add avrtiny arch.
 303         Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
 304         and attiny40.
 305         (md_show_usage): Add avrtiny arch in usage message.
 306         (avr_operand): validate and issue error for invalid register for
 307         avrtiny.
 308         add new reloc exp for 16 bit lds/sts instruction.
 309         (md_apply_fix): check 16 bit lds/sts operand for out of range and
 310         encode.
 311         (md_assemble): check ISA for arch and issue diagnostic.
 312         * NEWS: Mention new support.
 313         * doc/c-avr.texi: Document support for avrtiny architecture.
 314
 315 2014-06-27  Alan Modra  <amodra@gmail.com>
 316
 317         * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
 318         SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
 319         (obj_mach_o_frob_label): Avoid cascading errors.
 320         (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
 321
 322 2014-06-18  DJ Delorie  <dj@redhat.com>
 323
 324         * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
 325         suffix optional.
 326
 327 2014-06-17  Hans-Peter Nilsson  <hp@bitrange.com>
 328
 329         * config/tc-mmix.c (loc_assert_s): New member frag.
 330         (s_loc): Set it.
 331         (mmix_md_end): If an error is reported for a LOC expression, patch
 332         up the related frag.
 333
 334 2014-06-17  Chris Metcalf  <cmetcalf@tilera.com>
 335
 336         PR gas/16908
 337         * macro.c (buffer_and_nest): Honour #line directives inside
 338         macros.
 339
 340 2014-06-17 Jiong Wang <jiong.wang@arm.com>
 341
 342         * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
 343
 344 2014-06-17  Hans-Peter Nilsson  <hp@axis.com>
 345
 346         * config/tc-cris.c (cris_bad): New function.
 347         (cris_process_instruction): Where applicable, use it instead of
 348         as_bad.
 349
 350 2014-06-16  Nick Clifton  <nickc@redhat.com>
 351
 352         * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
 353
 354 2014-06-16  Jiong Wang  <jiong.wang@arm.com>
 355
 356         * config/tc-aarch64.c (END_OF_INSN): New macro.
 357         (parse_operands): Handle operand given and in wrong format when
 358         operand is optional.
 359
 360 2014-06-16  Alan Modra  <amodra@gmail.com>
 361
 362         * write.h (subsegs_finish): Delete declaration.
 363         * write.c (subsegs_finish): Make static.
 364         (write_object_file): Call subsegs_finish from here.  Don't print
 365         warning and error count here..
 366         * as.c (main): ..do so here instead.  Remove dead code for "no
 367         object file generated".  Split out count strings to better support
 368         internationalisation.  Don't call subsegs_finish. Tidy setting of
 369         "keep_it".  Run write_object_file even after errors.
 370         (keep_it): Make static.
 371         * config/obj-elf.c (elf_frob_symbol): Remove assert.
 372         (elf_frob_file_before_adjust): Likewise.
 373
 374 2014-06-16  Alan Modra  <amodra@gmail.com>
 375
 376         * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
 377         earlier.
 378
 379 2014-06-16  Alan Modra  <amodra@gmail.com>
 380
 381         * config/tc-i386.c (reloc): Don't avoid pcrel check for
 382         BFD_RELOC_SIZE64.  Return NO_RELOC on failing pcrel check.
 383
 384 2014-06-16  Alan Modra  <amodra@gmail.com>
 385
 386         * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
 387         (tic6x_output_exidx_entry): Likewise.
 388         (md_apply_fix): Simplify 1 byte md_number_to_chars.
 389
 390 2014-06-16  Alan Modra  <amodra@gmail.com>
 391
 392         * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
 393         end of archive to temp file.
 394         (tic54x_start_line_hook): Start scan for parallel on next line,
 395         not one char into next line (which may overrun the buffer).
 396
 397 2014-06-16  Alan Modra  <amodra@gmail.com>
 398
 399         * config/tc-vax.c (md_apply_fix): Rewrite.
 400         (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
 401         define rather than the equivalent BFD_RELOC_NONE.
 402
 403 2014-06-16  Alan Modra  <amodra@gmail.com>
 404
 405         * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
 406         (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
 407         and BFD_RELOC_ARM_TLS* relocs.  Simplify BFD_RELOC_8 case.
 408
 409 2014-06-16  Alan Modra  <amodra@gmail.com>
 410
 411         * config/tc-cris.c (md_create_long_jump): Follow "short" jump
 412         with a nop rather than leaving uninitialised.
 413
 414 2014-06-13  Chen Gang  <gang.chen.5i5j@gmail.com>
 415
 416         * config/tc-score7.c: Replace sprintf with strcpy where
 417         appropriate.
 418         (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
 419         frag.
 420         * config/tc-score.c (s3_relax_branch_inst16): Likewise.
 421         (s3_relax_cmpbranch_inst32): Likewise.
 422
 423 2014-06-07  Alan Modra  <amodra@gmail.com>
 424
 425         * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
 426         on unsigned fields.  Comment on PPC_OPERAND_SIGNOPT signed fields
 427         in 64-bit mode.
 428
 429 2014-06-02  Martin Storsjo  <martin@martin.st>
 430
 431         * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
 432
 433 2014-06-05  Joel Brobecker  <brobecker@adacore.com>
 434
 435         * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
 436         bfd's development.sh.
 437         * Makefile.in, configure: Regenerate.
 438
 439 2014-06-03  Nick Clifton  <nickc@redhat.com>
 440
 441         * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
 442         (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
 443         * doc/c-msp430.texi: Update command line option description.
 444
 445 2014-05-22  Alan Modra  <amodra@gmail.com>
 446
 447         * listing.c (listing_warning, listing_error): Add space after colon.
 448         * messages.c (as_warn_internal, as_bad_internal): Use the same
 449         string as above.
 450
 451 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 452
 453         * config/tc-mips.c (file_mips_opts_checked): New static global.
 454         (s_module): New static function.
 455         (file_ase): Remove.
 456         (mips_pseudo_table): Add .module handler.
 457         (mips_set_ase): Add opts argument and use instead of mips_opts.
 458         (md_assemble): Use file_mips_check_options.
 459         (md_parse_option): Update to use file_mips_opts instead of mips_opts.
 460         (mips_set_architecture): Delete function.  Moved to...
 461         (mips_after_parse_args): Here.  All logic now applies to
 462         file_mips_opts first and then copies the final state to mips_opts.
 463         Move error checking and defaults inference to mips_check_options and
 464         file_mips_check_options.
 465         (mips_check_options): New static function.  Common option checking for
 466         command line, .module and .set.  Use .module values in error messages
 467         instead of refering to command line options.
 468         (file_mips_check_options): New static function.  A wrapper for
 469         mips_check_options with file_mips_opts.  Updates BFD arch based on
 470         final options.
 471         (s_mipsset): Split into s_mipsset and parse_code_option.  Settings
 472         supported by both .set and .module are moved to parse_code_option.
 473         Warnings and errors are kept in s_mipsset because when
 474         parse_code_option is used with s_module the warnings are deferred
 475         until code is generated.  Any setting supporting 'default' value is
 476         kept in s_mipsset as it is not applicable to s_module. Inferred
 477         settings are also kept in s_mipsset as s_module does not infer any
 478         settings.  Use mips_check_options.
 479         (parse_code_option): New static function derived from s_mipsset.
 480         (s_module): New static function that implements .module.  Allows file
 481         level settings to be changed until code is generated.
 482         (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
 483         (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
 484         (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
 485         (md_mips_end): Use file_mips_check_options.
 486         * doc/c-mips.texi: Document .module.
 487
 488 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 489
 490         * messages.c (as_warn_internal): Remove extra whitespace from
 491         warning messages.
 492
 493 2014-05-20  Matthew Fortune  <matthew.fortune@imgtec.com>
 494
 495         * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
 496         (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
 497
 498 2014-05-20  Mike Stump  <mikestump@comcast.net>
 499
 500         * messages.c (as_warn_internal): Ensure we don't interleave output
 501         within a single line when make -j is used.
 502         (as_bad_internal): Likewise.
 503
 504 2014-05-20  Richard Sandiford  <rdsandiford@googlemail.com>
 505
 506         * config/obj-elf.h (obj_elf_seen_attribute): Declare.
 507         * config/obj-elf.c (recorded_attribute_info): New structure.
 508         (recorded_attributes): New variable.
 509         (record_attribute, obj_elf_seen_attribute): New functions.
 510         (obj_elf_vendor_attribute): Record which attributes have been seen.
 511
 512 2014-05-20  Nick Clifton  <nickc@redhat.com>
 513
 514         * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
 515         Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
 516         (msp430_srcoperand): Store vshift value in operand.
 517
 518 2014-05-19  Nick Clifton  <nickc@redhat.com>
 519
 520         PR gas/16858
 521         * config/tc-i386.c (md_apply_fix): Improve the detection of code
 522         symbols for 32-bit PE targets.
 523
 524 2014-05-18  Richard Sandiford  <rdsandiford@googlemail.com>
 525
 526         * config/tc-mips.c (md_obj_begin): Delete.
 527         (md_obj_end): Fold into...
 528         (md_mips_end): ...here.  Move to end of file.
 529
 530 2014-05-17  Nick Clifton  <nickc@redhat.com>
 531
 532         PR gas/16946
 533         * config/tc-v850.c (handle_ctoff): Generate an error if called
 534         when using the RH850 ABI.
 535
 536 2014-05-16  Kaushik Phata  <Kaushik.Phatak@kpit.com>
 537
 538         * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
 539         and OPTION_64BIT_DOUBLES.
 540         (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
 541         (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
 542         (md_show_usage): Show all of the RL78 options.
 543         (rl78_float_cons): New static functions.
 544         (md_pseudo_table): Update handler for "double".
 545         * doc/c-rl78.texi: Document new options.
 546         * doc/as.texinfo: Likewise.
 547
 548 2014-05-13  Matthew Fortune  <matthew.fortune@imgtec.com>
 549
 550         * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
 551         (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
 552         (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
 553         (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
 554
 555 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 556
 557         * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
 558         references.
 559
 560 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 561
 562         * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
 563         Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
 564         (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
 565         file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
 566         one struct...
 567         (file_mips_opts): Here. New static global. Update throughout.
 568         (mips_opts): Update defaults for gp32 and fp.
 569
 570 2014-05-08  Matthew Fortune  <matthew.fortune@imgtec.com>
 571
 572         * config/tc-mips.c (streq): Define.
 573         (mips_convert_symbolic_attribute): New function.
 574         * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
 575         (mips_convert_symbolic_attribute): New prototype.
 576
 577 2014-05-02  Max Filippov  <jcmvbkbc@gmail.com>
 578
 579         * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
 580         fixups as signed.
 581
 582 2014-05-07  Andrew Bennett  <andrew.bennett@imgtec.com>
 583
 584         * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
 585         and mips64r5.
 586         (ISA_HAS_64BIT_FPRS): Likewise.
 587         (ISA_HAS_ROR): Likewise.
 588         (ISA_HAS_ODD_SINGLE_FPR): Likewise.
 589         (ISA_HAS_MXHC1): Likewise.
 590         (hilo_interlocks): Likewise.
 591         (md_longopts): Likewise.
 592         (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
 593         (ISA_HAS_DROR): Likewise.
 594         (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
 595         OPTION_MIPS64R5.
 596         (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
 597         mips64r5.
 598         (md_parse_option): Likewise.
 599         (s_mipsset): Likewise.
 600         (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
 601         and mips64r5.  Also change p5600 entry to be mips32r5.
 602         * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
 603         mips64r5.
 604         * configure: Regenerate.
 605         * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
 606         -mips64r5 command line options.
 607         * doc/as.texinfo: Likewise.
 608
 609 2014-04-28  Nick Clifton  <nickc@redhat.com>
 610
 611         PR gas/16858
 612         * config/tc-i386.c (md_apply_fix): Do not adjust value of
 613         pc-relative fixes against weak symbols.
 614
 615 2014-04-26  Alan Modra  <amodra@gmail.com>
 616
 617         * po/POTFILES.in: Regenerate.
 618
 619 2014-04-24  Nick Clifton  <nickc@redhat.com>
 620
 621         * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
 622         based targets.
 623
 624 2014-04-23  Will Newton  <will.newton@linaro.org>
 625
 626         * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
 627         directly instead of mapping_state.
 628
 629 2014-04-23  Andrew Bennett  <andrew.bennett@imgtec.com>
 630
 631         * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
 632         (md_longopts): Add xpa and no-xpa command line options.
 633         (mips_ases): Add MIPS XPA ASE.
 634         (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
 635         * doc/as.texinfo: Document the MIPS XPA command line options.
 636         * doc/c-mips.texi: Document the MIPS XPA command line options,
 637         and assembler directives.
 638
 639 2014-04-22  Sandra Loosemore  <sandra@codesourcery.com>
 640
 641         * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
 642         unbreak self-test mode.
 643
 644 2014-04-22  Max Filippov  <jcmvbkbc@gmail.com>
 645
 646         * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
 647         first section frag.
 648
 649 2014-04-22  Christian Svensson  <blue@cmd.nu>
 650
 651         * Makefile.am: Remove openrisc and or32 support.  Add support for or1k.
 652         * configure.in: Likewise.
 653         * configure.tgt: Likewise.
 654         * doc/as.texinfo: Likewise.
 655         * config/obj-coff.h: Likewise.
 656         * config/tc-or1k.c: New file.
 657         * config/tc-or1k.h: New file.
 658         * config/tc-openrisc.c: Delete.
 659         * config/tc-openrisc.h: Delete.
 660         * config/tc-or32.c: Delete.
 661         * config/tc-or32.h: Delete.
 662         * Makefile.in: Regenerate.
 663         * configure: Regenerate.
 664
 665 2014-04-16  Alan Modra  <amodra@gmail.com>
 666
 667         * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
 668         * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
 669
 670 2014-04-10  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
 671
 672         * config/tc-avr.c: Add new flag mlink-relax.
 673         (md_show_usage): Add flag and help text.
 674         (md_parse_option): Record whether link relax is turned on.
 675         (relaxable_section): New.
 676         (avr_validate_fix_sub): New.
 677         (avr_force_relocation): New.
 678         (md_apply_fix): Generate DIFF reloc.
 679         (avr_allow_local_subtract): New.
 680
 681         * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
 682         (TC_FORCE_RELOCATION): Define.
 683         (TC_FORCE_RELOCATION_SUB_SAME): Define.
 684         (TC_VALIDATE_FIX_SUB): Define.
 685         (avr_force_relocation): Declare.
 686         (avr_validate_fix_sub): Declare.
 687         (md_allow_local_subtract): Define.
 688         (avr_allow_local_subtract): Declare.
 689
 690 2014-04-10  Andrew Bennett  <andrew.bennett@imgtec.com>
 691
 692         * config/tc-mips.c (mips_cpu_info_table): Add P5600
 693         configuation.
 694         * doc/c-mips.texi: Document p5600.
 695
 696 2014-04-09  Nick Clifton  <nickc@redhat.com>
 697
 698         * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
 699         * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
 700         * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
 701         * read.c (emit_expr_fix): Mark the r parameter as potentially
 702         unused.
 703
 704 2014-04-09  Alan Modra  <amodra@gmail.com>
 705
 706         * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
 707         New static vars.
 708         (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
 709         (ppc_elf_cons_fix_check): New function.
 710         (md_assemble): Set last_insn, last_seg, last_subseg.
 711         (ppc_byte, md_apply_fix): Handle warn_476.
 712         * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
 713         (ppc_elf_cons_fix_check): Declare.
 714         * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
 715
 716 2014-04-09  Alan Modra  <amodra@gmail.com>
 717
 718         * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
 719         * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
 720         * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
 721         (TC_CONS_FIX_NEW): Add RELOC parameter.
 722         * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
 723         * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
 724         * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
 725         * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 726         * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
 727         * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
 728         * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 729         * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
 730         * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
 731         Similarly.
 732         * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
 733         * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
 734         * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
 735         * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
 736         * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
 737         * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 738         * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
 739         * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
 740         * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
 741         * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
 742         Similarly.
 743         * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
 744         * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
 745         Similarly.
 746         * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
 747         * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
 748         * gas/config/tc-avr.c (exp_mod_data): Make global.
 749         (pexp_mod_data): Delete.
 750         (avr_parse_cons_expression): Return exp_mod_data pointer.
 751         (avr_cons_fix_new): Add exp_mod_data_t pointer param.
 752         (exp_mod_data_t): Move typedef..
 753         * gas/config/tc-avr.h: ..to here.
 754         (exp_mod_data): Declare.
 755         (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
 756         (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
 757         (TC_CONS_FIX_NEW): Update.
 758         * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
 759         (cons_fix_new_hppa): Add hppa_field_selector param.
 760         (fix_new_hppa): Adjust.
 761         (parse_cons_expression_hppa): Return field selector.
 762         * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
 763         (cons_fix_new_hppa): Likewise.
 764         (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
 765         * gas/config/tc-i386.c (got_reloc): Delete static var.
 766         (x86_cons_fix_new): Add reloc param.
 767         (x86_cons): Return got reloc.
 768         * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
 769         (TC_CONS_FIX_NEW): Add RELOC param.
 770         * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param.  Adjust
 771         calls.
 772         * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
 773         (TC_CONS_FIX_NEW): Add reloc param.
 774         * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
 775         Return reloc.
 776         (cons_fix_new_microblaze): Add reloc param.
 777         * gas/config/tc-microblaze.h: Formatting.
 778         (parse_cons_expression_microblaze): Update proto.
 779         (cons_fix_new_microblaze): Likewise.
 780         * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
 781         (nios2_cons): Return ldo reloc.
 782         (nios2_cons_fix_new): Delete.
 783         * gas/config/tc-nios2.h (nios2_cons): Update prototype.
 784         (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
 785         * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
 786         short.  Make llong use cons.
 787         (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 788         (ppc_elf_cons): Delete.
 789         (ppc_elf_parse_cons): New function.
 790         (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
 791         (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 792         * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
 793         (ppc_elf_parse_cons): Declare.
 794         * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
 795         (sparc_cons): Return reloc specifier.
 796         (cons_fix_new_sparc): Add reloc specifier param.
 797         (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
 798         * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
 799         (TC_PARSE_CONS_RETURN_NONE): Define.
 800         (sparc_cons, cons_fix_new_sparc): Update prototype.
 801         * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
 802         (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
 803         (md_assemble): Likewise.
 804         (parse_cons_expression_v850): Return reloc.
 805         (cons_fix_new_v850): Add reloc parameter.
 806         * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
 807         (cons_fix_new_v850): Likewise.
 808         * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
 809         (vax_cons): Return reloc.
 810         (vax_cons_fix_new): Add reloc parameter.
 811         * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
 812         * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
 813         * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
 814         * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
 815         (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
 816         * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
 817         (do_parse_cons_expression): Adjust.
 818         (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
 819         to emit_expr_with_reloc.
 820         (emit_expr_with_reloc): New function handling reloc, mostly
 821         extracted from..
 822         (emit_expr): ..here.
 823         (emit_expr_fix): Add reloc param.  Adjust TC_CONS_FIX_NEW invocation.
 824         Handle reloc.
 825         (parse_mri_cons): Convert to ISO.
 826         * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
 827         (TC_PARSE_CONS_RETURN_NONE): Define.
 828         (emit_expr_with_reloc): Declare.
 829         (emit_expr_fix): Update prototype.
 830         * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
 831
 832 2014-04-03  Ilya Tocar  <ilya.tocar@intel.com>
 833
 834         * config/tc-i386.c (cpu_arch): Add .se1.
 835         * doc/c-i386.texi: Document .se1/se1.
 836
 837 2014-04-02  DJ Delorie  <dj@redhat.com>
 838
 839         * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
 840         pc-relative branches.
 841
 842 2014-04-02  Nick Clifton  <nickc@redhat.com>
 843
 844         PR gas/16765
 845         * config/tc-arm.c (create_unwind_entry): Report an error if an
 846         attempt to recreate an unwind directive is encountered.
 847
 848 2014-03-27  Nick Clifton  <nickc@redhat.com>
 849
 850         * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
 851         sprintf in order to avoid a compile time warning.
 852
 853 2014-03-26  Nick Clifton  <nickc@redhat.com>
 854
 855         * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
 856         relocation is used on an 8-bit operand or vice versa.
 857         (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
 858         (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
 859
 860 2014-03-25  Nick Clifton  <nickc@redhat.com>
 861
 862         * config/obj-coff-seh.c (obj_coff_seh_code): New function -
 863         switches the current segment back to the code segment recorded
 864         when seh_proc was last invoked.
 865         * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
 866
 867 2014-03-25  Alan Modra  <amodra@gmail.com>
 868
 869         * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
 870         (md_assemble): Likewise.  Warn.
 871
 872 2014-03-21  David Weatherford <weath@cadence.com>
 873             Max Filippov <jcmvbkbc@gmail.com>
 874
 875         * config/tc-xtensa.c (xtensa_check_frag_count)
 876         xtensa_create_trampoline_frag,
 877         xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
 878         find_trampoline_seg, search_trampolines, get_best_trampoline,
 879         check_and_update_trampolines, add_jump_to_trampoline,
 880         dump_trampolines): New functions.
 881         (md_parse_option): Add cases for --[no-]trampolines options.
 882         (md_assemble, finish_vinsn, xtensa_end): Add call to
 883         xtensa_check_frag_count.
 884         (xg_assemble_vliw_tokens): Add call to
 885         xtensa_maybe_create_trampoline_frag.
 886         (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
 887         (relax_frag_immed): Relax jump instructions that cannot reach its
 888         target.
 889         * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
 890         relax state.
 891         * doc/as.texinfo: Document --[no-]trampolines command-line options.
 892         * doc/c-xtensa.texi: Document trampolines relaxation and command
 893         line options.
 894         * frags.c (get_frag_count, clear_frag_count): New function.
 895         (frag_alloc): Increment totalfrags counter.
 896         * frags.h (get_frag_count, clear_frag_count): New function.
 897
 898 2014-03-20  DJ Delorie  <dj@redhat.com>
 899
 900         * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
 901         * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
 902         rl78_relax().
 903         * config/tc-rl78.h (md_relax_frag): Define.
 904         (rl78_relax_frag): Declare.
 905         * config/tc-rl78.c (rl78_relax): Add.
 906         (md_assemble): Set up the variable frags also when relaxing.
 907         (op_type_T): New.
 908         (rl78_opcode_type): New.
 909         (rl78_frag_fix_value): New.
 910         (md_estimate_size_before_relax): New-ish.
 911         (rl78_relax_frag): New.
 912         (md_convert_frag): New-ish.
 913
 914 2014-03-20  Richard Sandiford  <rdsandiford@googlemail.com>
 915
 916         * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
 917         * config/tc-mips.c (md_pcrel_from): Remove error message.
 918         (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
 919         BFD_RELOC_32_PCREL.  Report a specific error message for unhandled
 920         PC-relative expressions.  Handle BFD_RELOC_8.
 921
 922 2014-03-19  Jose E. Marchesi  <jose.marchesi@oracle.com>
 923
 924         * config/tc-sparc.c (hpriv_reg_table): Added entries for
 925         %hstick_offset and %hstick_enable.
 926         * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
 927         %hstick_enable hyperprivileged registers.
 928
 929 2014-03-19  Daniel Gutson <daniel.gutson@tallertechnologies.com>
 930             Nick Clifton  <nickc@redhat.com>
 931
 932         * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
 933         CCS syntax compatibility mode is on or off.
 934         (asmfunc_states): New enum to represent the asmfunc directive state.
 935         (asmfunc_state): New variable holding the asmfunc directive state.
 936         (comment_chars): Rename to arm_comment_chars.
 937         (line_separator_chars): Rename to arm_line_separator_chars.
 938         (s_ccs_ref): New function that handles the .ref directive.
 939         (asmfunc_debug): New function.
 940         (s_ccs_asmfunc): New function that handles the .asmfunc directive.
 941         (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
 942         (s_ccs_def): New function that handles the .def directive.
 943         (tc_start_label_without_colon): New function.
 944         (md_pseudo_table): Added new CCS directives.
 945         (arm_ccs_mode): New function that handles the -mccs command line option.
 946         (arm_long_opts): Added new -mccs command line option.
 947         * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
 948         (TC_START_LABEL_WITHOUT_COLON): New macro.
 949         (tc_start_label_without_colon): Added extern function declaration.
 950         (tc_comment_chars): Define.
 951         (tc_line_separator_chars): Define.
 952         * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
 953         * read.c (read_begin): Likewise.
 954         * doc/as.texinfo: Add documentation for the -mccs command line
 955         option.
 956         * doc/c-arm.texi: Likewise.
 957         * doc/internals.texi: Document tc_line_separator_chars.
 958         * NEWS: Mention the new feature.
 959
 960 2014-03-18  Jiong Wang  <jiong.wang@arm.com>
 961
 962         * config/tc-aarch64.c (aarch64_opts): Add new option
 963         "mno-verbose-error".
 964         (verbose_error_p): Initialize to 1.
 965         * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
 966         and -mno-verbose-error.
 967
 968 2014-03-17  Nick Clifton  <nickc@redhat.com>
 969
 970         PR gas/16694
 971         * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
 972         registers as well.
 973
 974 2014-03-13  Richard Earnshaw  <rearnsha@arm.com>
 975             Jiong Wang  <Jiong.Wang@arm.com>
 976
 977         * doc/c-aarch64.texi: Clean up some formatting issues.
 978         (AArch64 Options): Document -mcpu and -march.
 979         (AArch64 Extensions): New node.
 980
 981 2014-03-13  Tristan Gingold  <gingold@adacore.com>
 982
 983         * config/tc-i386.c (use_big_obj): Declare.
 984         (OPTION_MBIG_OBJ): Define.
 985         (md_longopts): Add -mbig-obj option.
 986         (md_parse_option): Handle it.
 987         (md_show_usage): Display help for this option.
 988         (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
 989         * doc/c-i386.texi: Document the option.
 990
 991 2014-03-12  Nick Clifton  <nickc@redhat.com>
 992
 993         PR gas/16688
 994         * config/tc-aarch64.c (literal_expression): New structure.
 995         (literal_pool): Replace exp array with literal_expression array.
 996         (add_to_lit_pool): When adding a bignum cache the big value.
 997         (s_ltorg): When emitting a bignum initialise the global bignum
 998         array from the cached value.
 999
1000 2014-03-12  Alan Modra  <amodra@gmail.com>
1001
1002         * Makefile.in: Regenerate.
1003         * config.in: Regenerate.
1004         * doc/Makefile.in: Regenerate.
1005
1006 2014-03-06  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
1007         Vishnu KS <Vishnu.k_s@atmel.com>
1008         Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
1009         Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
1010
1011         * gas/tc-avr.c: Add new devices
1012         avr25: ata5272, attiny828
1013         avr35: ata5505, attiny1634
1014         avr4: atmega8a, ata6285, ata6286, atmega48pa
1015         avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
1016         atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
1017         atmega16hva2
1018         avr51: atmega128a, atmega1284
1019         avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1020         atxmega32e5, atxmega16e5, atxmega8e5
1021         avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1022         atxmega64c3, atxmega64d4
1023         avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1024         atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1025         atxmega256c3, atxmega384c3, atxmega384d3
1026         avrxmega7: atxmega128a4u
1027         * doc/c-avr.texi: Ditto.
1028
1029 2014-03-05  Alan Modra  <amodra@gmail.com>
1030
1031         Update copyright years.
1032
1033 2014-03-05  Alan Modra  <amodra@gmail.com>
1034
1035         * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1036         (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1037
1038 2014-03-05  Alan Modra  <amodra@gmail.com>
1039
1040         * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1041         later.  Merge absolute and relative branch reloc selection.
1042         Generate 16-bit relocs for most 16-bit insn fields given a
1043         non-constant expression.
1044
1045 2014-03-05  Alan Modra  <amodra@gmail.com>
1046
1047         * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1048         (md_assemble): Don't call ppc_is_toc_sym for ELF.
1049
1050 2014-03-04  Heiher  <r@hev.cc>
1051
1052         * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1053         Loongson-3A.
1054
1055 2014-03-03  Nick Clifton  <nickc@redhat.com>
1056
1057         * config/msp430/msp430.c: Replace known mcu array with known
1058         msp430 ISA mcu name array.
1059         Accept any name for -mmcu option.
1060         Add -mz option to warn about missing NOP following an interrupt
1061         status change.
1062         (check_for_nop): New.
1063         (msp430_operands): Emit a warning, if requested, when an interrupt
1064         changing instruction is not followed by a NOP.
1065         * doc/c-msp430.c: Document -mz option.
1066
1067 2014-03-03  Alan Modra  <amodra@gmail.com>
1068
1069         * config/bfin-lex-wrapper.c: Correct copyright date.
1070         * config/obj-fdpicelf.c: Likewise.
1071         * config/obj-fdpicelf.h: Likewise.
1072         * config/tc-frv.c: Correct copyright punctuation.
1073         * config/tc-ip2k.c: Likewise.
1074         * config/tc-iq2000.c: Likewise.
1075         * config/tc-mep.c: Likewise.
1076         * config/tc-tic4x.c: Likewise.
1077         * config/tc-tic4x.h: Likewise.
1078
1079 2014-03-01  Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1080
1081         * config/tc-avr.c: Remove atxmega16x1.
1082
1083 2014-02-28  Alan Modra  <amodra@gmail.com>
1084
1085         * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1086         field for 64-bit dwarf.
1087
1088 2014-02-21  Ilya Tocar  <ilya.tocar@intel.com>
1089
1090         * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1091         * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1092
1093 2014-02-12  Ilya Tocar  <ilya.tocar@intel.com>
1094
1095         * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1096         * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1097         clflushopt/.clfushopt.
1098
1099 2014-02-10  Alan Modra  <amodra@gmail.com>
1100
1101         * po/POTFILES.in: Regenerate.
1102         * po/gas.pot: Regenerate.
1103
1104 2014-02-03  Sandra Loosemore  <sandra@codesourcery.com>
1105
1106         * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1107         (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1108         %got_hiadj relocation operators.  Sort table and add comment
1109         to explain ordering.
1110         (nios2_fix_adjustable): Test for new relocs.
1111         * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1112         operators.
1113
1114 2014-01-30  Sandra Loosemore  <sandra@codesourcery.com>
1115
1116         * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1117         (nios2_assemble_args_m): Likewise.
1118         (md_assemble): Likewise.
1119
1120 2014-01-24  DJ Delorie  <dj@redhat.com>
1121
1122         * config/tc-msp430.c (msp430_section): Always flag data sections,
1123         regardless of -md.
1124         (msp430_frob_section): New.  Make sure all sections are noticed if
1125         they have content.
1126         (msp430_lcomm): New.  Flag bss if .lcomm is seen.
1127         (msp430_comm): New.  Likewise.
1128         (md_pseudo_table): Add them.
1129         * config/tc-msp430.h (msp430_frob_section): Declare.
1130         (tc_frob_section): Define.
1131
1132 2014-01-23  Nick Clifton  <nickc@redhat.com>
1133
1134         * config/tc-msp430.c (show_mcu_list): Delete.
1135         (md_parse_option): Accept any MCU name.  Accept several more
1136         variants for the -mcpu option.
1137         (md_show_usage): Do not call show_mcu_list.
1138
1139 2014-01-22  DJ Delorie  <dj@redhat.com>
1140
1141         * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1142         * doc/c-msp430.texi (MSP430 Directives): Document it.
1143
1144 2014-01-22  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>
1145
1146         * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1147         gather assert.
1148
1149 2014-01-22  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>
1150
1151         PR gas/16489
1152         * config/tc-i386.c (check_VecOperands): Add check for invalid
1153         register set in AVX512 gathers.
1154
1155 2014-01-22  Alan Modra  <amodra@gmail.com>
1156
1157         * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1158
1159 2014-01-21  DJ Delorie  <dj@redhat.com>
1160
1161         * config/tc-rl78.c (require_end_of_expr): New.
1162         (md_operand): Call it.
1163         (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1164         as not overflowing.
1165
1166 2014-01-17  Will Newton  <will.newton@linaro.org>
1167
1168         * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1169         for the s32.f64 flavours of VCVT.
1170
1171 2014-01-14  Nick Clifton  <nickc@redhat.com>
1172
1173         PR gas/16434
1174         * config/tc-z80.c (wrong_match): Provide format string to
1175         as_warn.
1176         (parse_exp_not_indexed): Delete unused variable dummy.
1177         (emit_byte): Delete unused variable fixp.
1178
1179 2014-01-08  H.J. Lu  <hongjiu.lu@intel.com>
1180
1181         * config/tc-i386.c (regbnd): Removed.
1182         (vec_disp8): Likewise.
1183
1184 2014-01-08  H.J. Lu  <hongjiu.lu@intel.com>
1185
1186         * as.c (parse_args): Update copyright year to 2014.
1187
1188 2014-01-07  Tom Tromey  <tromey@redhat.com>
1189
1190         * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1191         wrappers.
1192
1193 2014-01-07  Tom Tromey  <tromey@redhat.com>
1194
1195         * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1196         use PARAMS.
1197
1198 2014-01-07  Tom Tromey  <tromey@redhat.com>
1199
1200         * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1201
1202 2013-01-07  Philipp Tomsich  <philipp.tomsich@theobroma-systems.com>
1203
1204         * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1205
1206 For older changes see ChangeLog-2013
1207 \f
1208 Copyright (C) 2014 Free Software Foundation, Inc.
1209
1210 Copying and distribution of this file, with or without modification,
1211 are permitted in any medium without royalty provided the copyright
1212 notice and this notice are preserved.
1213
1214 Local Variables:
1215 mode: change-log
1216 left-margin: 8
1217 fill-column: 74
1218 version-control: never
1219 End: