gas/ChangeLog

   1 2007-11-29  Martin Schwidefsky  <schwidefsky@de.ibm.com>
   2
   3         * config/tc-s390.c (md_begin): If the -mesa option is specified
   4         add zarch opcodes to the hash table only if there is no variant
   5         that is available for the esa mode as well.
   6
   7 2007-11-26  Thomas Ogrisegg  <tom-bugs@gas.fnord.at>
   8
   9         * config/tc-alpha.c (assemble_insn): Don't segv on NULL reloc_operand.
  10
  11 2007-11-19  Bob Wilson  <bob.wilson@acm.org>
  12
  13         * config/xtensa-istack.h (tinsn_struct): Replace linenum field
  14         with loc_directive_seen and debug_line.
  15         * config/tc-xtensa.c: Include xtensa-istack.h after dwarf2dbg.h.
  16         (xg_build_to_insn): Copy the new fields instead of linenum.
  17         (xg_build_token_insn): Likewise.  Abort on INSTR_LABEL_DEF and move
  18         common code out of the switch.
  19         (md_assemble): Set new tinsn fields from DWARF information.  Call
  20         dwarf2_consume_line_info.
  21         (xg_assemble_vliw_tokens): Update the code to select the "best" line
  22         number to use new information.  Call dwarf2_gen_line_info instead
  23         of dwarf2_emit_insn.
  24
  25 2007-11-19  Bob Wilson  <bob.wilson@acm.org>
  26
  27         * dwarf2dbg.h (dwarf2_loc_directive_seen): New.
  28         * dwarf2dbg.c (loc_directive_seen): Make external and rename to...
  29         (dwarf2_loc_directive_seen): ...this.
  30         (dwarf2_emit_insn, dwarf2_consume_line_info)
  31         (dwarf2_emit_label, dwarf2_directive_loc): Use new name.
  32
  33 2007-11-19  Bob Wilson  <bob.wilson@acm.org>
  34
  35         * dwarf2dbg.c (dwarf2_emit_label): Use dwarf2_consume_line_info.
  36
  37 2007-11-19  Bob Wilson  <bob.wilson@acm.org>
  38
  39         * dwarf2dbg.c (dwarf2_consume_line_info): New.
  40         (dwarf2_emit_insn): Use it here.
  41         (dwarf2_directive_loc): Fix check for consecutive .loc directives
  42         when debug_type is DEBUG_DWARF2.
  43         * dwarf2dbg.h (dwarf2_consume_line_info): New prototype.
  44         * config/tc-ia64.c (ia64_flush_insns): Call dwarf2_consume_line_info.
  45         (md_assemble): Likewise.
  46
  47 2007-11-17  Thiemo Seufer  <ths@mips.com>
  48
  49         * config/tc-mips.c (md_parse_option): Match mips_optimize to the -O
  50         option supplied, but still keep mips_optimize == 2 as default value.
  51
  52 2007-11-17  Thiemo Seufer  <ths@mips.com>
  53
  54         * doc/as.texinfo: Document the new attribute value.
  55
  56 2007-11-16  Eric B. Weddington  <eric.weddington@atmel.com>
  57
  58         * config/tc-avr.c (mcu_types): Add ATmega32HVB device.
  59         * doc/c-avr.texi: Likewise.
  60
  61 2007-11-16  Eric B. Weddington  <eric.weddington@atmel.com>
  62
  63         * config/tc-avr.c (mcu_types): Add ATmega1284P device.
  64         * doc/c-avr.texi: Likewise.
  65
  66 2007-11-14  Tristan Gingold  <gingold@adacore.com>
  67
  68         * config/tc-ia64.c (AR_RUC): Defined.
  69         (ar): Add "ar.ruc".
  70         (specify_resource): Handle AR_RUC like AR_ITC.
  71
  72 2007-11-13  Nick Clifton  <nickc@redhat.com>
  73
  74         * config/tc-mn10300.c (mn10300_force_relocation): Force a reloc to
  75         be generated for alignment fixups.
  76         * config/tc-mn10300.h (TC_FORCE_RELOCATION): Call
  77         mn10300_force_relocation.
  78
  79 2007-11-12  Nick Clifton  <nickc@redhat.com>
  80
  81         PR gas/5269
  82         * config/tc-frv.c (md_show_usage): Rewrite usage description to
  83         make it easier to translate.
  84         * gas/po/gas.pot: Regenerate.
  85
  86 2007-11-12  Tristan Gingold  <gingold@adacore.com>
  87
  88         * config/tc-ppc.c (md_assemble): If -mregnames, when parsing
  89         PPC_OPERAND_CR always parse as expression to allow register name
  90         followed by an expression.
  91
  92 2007-11-09  H.J. Lu  <hongjiu.lu@intel.com>
  93
  94         * config/tc-i386.c (match_template): Re-order suffix check.
  95
  96 2007-11-07  Bob Wilson  <bob.wilson@acm.org>
  97
  98         * config/tc-xtensa.c (relaxable_section): Check for .eh_frame.
  99
 100 2007-11-07  Eric B. Weddington  <eweddington@cso.atmel.com>
 101
 102         * config/tc-avr.c (mcu_types): Add ATtiny88 device.
 103         * doc/c-avr.texi: Likewise.
 104
 105 2007-11-07  Anatoly Sokolov <aesok@post.ru>
 106
 107         * config/tc-avr.c (mcu_types): Add new devices: ATmega48P,
 108         ATmega88P, ATmega168P, Atmega328P
 109         * doc/c-avr.texi: Document new devices.
 110
 111 2007-11-07  Tristan Gingold  <gingold@adacore.com>
 112
 113         * config/tc-ppc.c (md_apply_fix): For PPC_TOC16 on XCOFF, uses
 114         offset within the TOC instead of the VMA.
 115
 116 2007-11-06  Paul Brook  <paul@codesourcery.com>
 117
 118         * config/tc-arm.c (do_mull): Allow overlapping Rm for armv6.
 119
 120 2007-11-06  Nick Clifton  <nickc@redhat.com>
 121
 122         * ehopt.c (check_eh_frame): If md_allow_eh_opt is defined, invoke
 123         it to see if the optimizations should be applied.
 124         * config/tc-mn10300.h (md_allow_eh_opt): Define.  Only allow call
 125         frame optimization if linker relaxation is not enabled.
 126
 127 2007-11-05  Danny Smith  <dannysmith@users.sourceforge.net>
 128
 129         * read.c (ALIGN_LIMIT): Rename to ...
 130         (TC_ALIGN_LIMIT): Guard against prior definition.
 131         * config/tc-i386.h (TC_ALIGN_LIMIT)[TE_PE]: Define.
 132
 133 2007-11-01  Sterling Augustine  <sterling@tensilica.com>
 134
 135         * config/tc-xtensa.c (xtensa_symbol_new_hook): New.
 136         (xtensa_mark_difference_of_two_symbols): New.
 137         (xtensa_post_relax_hook): Call xtensa_mark_difference_of_two_symbols.
 138         * config/tc-xtensa.h (xtensa_symfield_type): Add next_expr_symbol.
 139         (tc_symbol_new_hook): Define.
 140
 141 2007-11-01  H.J. Lu  <hongjiu.lu@intel.com>
 142
 143         * config/tc-i386.c (md_assemble): Replace no_xsuf with
 144         no_ldsuf.
 145         (match_template): Likewise.
 146
 147 2007-11-01  H.J. Lu  <hongjiu.lu@intel.com>
 148
 149         * config/tc-i386.h (LONG_DOUBLE_MNEM_SUFFIX): Use a non-ascii
 150         letter.
 151
 152 2007-11-01  H.J. Lu  <hongjiu.lu@intel.com>
 153
 154         * config/tc-i386.c (process_suffix): Check addrprefixop0 to
 155         see if the address size override prefix changes the size of the
 156         first operand.
 157         (check_byte_reg): Don't warn if byteokintel is set.
 158         (check_long_reg): Set i.suffix to QWORD_MNEM_SUFFIX if toqword
 159         is set.
 160         (check_qword_reg): Set i.suffix to LONG_MNEM_SUFFIX if todword
 161         is set.
 162
 163 2007-10-31  Eric B. Weddington  <eweddington@cso.atmel.com>
 164
 165         * config/tc-avr.c (mcu_types): Remove devices that were never produced:
 166         attiny10, atmega83, atmega85, atmega603.
 167         * doc/c-avr.texi: Likewise.
 168
 169 2007-10-30  Nick Clifton  <nickc@redhat.com>
 170
 171         * config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when
 172         sym_diff relocs should be generated.
 173         (md_apply_fix): Skip R_MN10300_ALIGN relocs.
 174         (mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs.
 175         (mn10300_handle_align): New function.  Generate R_MN10300_ALIGN
 176         relocs to record alignment requests.
 177         * config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force
 178         R_MN10300_ALIGN relocs.
 179         (HANDLE_ALIGN): Define.  Call mn10300_handle_align.
 180
 181 2007-10-30  Nick Clifton  <nickc@redhat.com>
 182
 183         * doc/as.texinfo (Section): Replace "subsegment" with
 184         "subsection".
 185
 186 2007-10-27  H.J. Lu  <hongjiu.lu@intel.com>
 187
 188         PR gas/5221
 189         * config/obj-elf.c (obj_elf_section): Handle optional
 190         parameters for .pushsection.
 191
 192         * doc/as.texinfo: Document optional parameters for
 193         .pushsection.
 194
 195 2007-10-24  H.J. Lu  <hongjiu.lu@intel.com>
 196
 197         * configure.in: Move AM_PROG_LIBTOOL after AC_GNU_SOURCE.
 198         * configure: Regenerated.
 199
 200 2007-10-24  Alan Modra  <amodra@bigpond.net.au>
 201
 202         * Makefile.am (INCLUDES, DEP_INCLUDES): Remove -D_GNU_SOURCE.
 203         Run "make dep-am".
 204         * configure.in: Invoke AC_GNU_SOURCE.
 205         * Makefile.in: Regenerate.
 206         * config.in: Regenerate.
 207         * configure: Regenerate.
 208
 209 2007-10-19  Nick Clifton  <nickc@redhat.com>
 210
 211         * expr.c (expr): Test md_allow_local_subtract (if defined) before
 212         allowing the evaluation of an expression involving two symbols
 213         defined in the same section.
 214         * doc/internals.texi (md_allow_local_subtract): Document the new
 215         macro.
 216         * config/tc-mn10300.h (md_allow_local_subtract): Define.
 217         (RELAX_EXPANSION_POSSIBLE): Define.
 218         (MAX_RELOC_EXPANSION): Define.
 219         (TC_FRAG_TYPE): Define.
 220         * config/tc-mn10300.c (md_assemble): Mark fragments as containing code.
 221         (tc_gen_reloc): Return an array of relocs.  If necessary generate
 222         two relocs to handle an expressions involving the difference of
 223         two symbols.
 224         (mn10300_fix_adjustable): Do not test TC_FORCE_RELOCATION_LOCAL
 225         when then fixup is not pc-relative.
 226         (mn10300_allow_local_subtract): New function.  Determine when it
 227         is safe to compute the difference between two symbols at assemble
 228         time.
 229
 230 2007-10-19  Alan Modra  <amodra@bigpond.net.au>
 231
 232         * config/tc-ppc.c (ppc_parse_name): Skip leading '%'.
 233         (md_assemble): When parsing PPC_OPERAND_CR, add '%' to set of
 234         chars that can start a name.
 235
 236 2007-10-18  Carlos O'Donell  <carlos@systemhalted.org>
 237
 238         * config/tc-hppa.c (pa_ip): Fix comment typo.
 239         (pa_comm): Likewise.
 240
 241 2007-10-18  Nick Clifton  <nickc@redhat.com>
 242
 243         PR gas/5172
 244         * config/tc-arc.c (md_estimate_size_before_relax): Change error
 245         message.
 246         (md_convert_frag): Just call abort.
 247         * config/tc-i860.c (md_estimate_size_before_relax): Change error
 248         message.
 249         * config/tc-i860.h (md_convert_frag): Just call abort.
 250         * config/tc-ip2k.c (md_estimate_size_before_relax): Change error
 251         message.
 252         (md_convert_frag): Just call abort.
 253         * config/tc-m68k.c (m68k_ip): Do not attempt translation of
 254         architecture names.
 255         PR gas/5174
 256         * config/tc-arm.c: Fix formatting and spelling errors.
 257         PR gas/5175
 258         * config/tc-xc16x.c: Fix formatting and internationalization.
 259         * po/gas.pot: Regenerate.
 260
 261 2007-10-17  Nick Clifton  <nickc@redhat.com>
 262
 263         PR gas/5173
 264         * as.h (ieee_md_atof, vax_md_atof): New prototypes.
 265         * read.c (s_float_space): Allow a zero length return from md_atof
 266         if the error message has been set.
 267         (float_cons): Likewise.
 268         * config/atof-ieee.c (ieee_md_atof): New function.  Performs the
 269         md_atof() function in a generic way for IEEE using targets.
 270         * config/atof-vax.c (md_atof): Rename to vax_md_atof.  Use the
 271         same error message as ieee_md_atof.
 272         * tc-alpha.c (md_atof): Use ieee_md_atof.  Remove #define of vax_md_atof.
 273         * tc-arc.c (md_atof): Use ieee_md_atof.
 274         * tc-arm.c (md_atof): Use sizeof (LITTLENUM_TYPE) instead of the
 275         constant 2.  Use a precision of 5 for the 'x' and 'p' types.
 276         * tc-avr.c (md_atof): Use ieee_md_atof.
 277         * tc-bfin.c (md_atof): Use ieee_md_atof.
 278         * tc-cr16.c (md_atof): Use ieee_md_atof.
 279         * tc-crx.c (md_atof): Use ieee_md_atof.
 280         * tc-d10v.c (md_atof): Use ieee_md_atof.
 281         * tc-d30v.c (md_atof): Use ieee_md_atof.
 282         * tc-dlx.c (md_atof): Use ieee_md_atof.
 283         * tc-fr30.c (md_atof): Use ieee_md_atof.
 284         * tc-frv.c (md_atof): Use ieee_md_atof.
 285         * tc-h8300.c (md_atof): Use ieee_md_atof.
 286         * tc-hppa.c (md_atof): Use ieee_md_atof.
 287         * tc-i370.c (md_atof): Use ieee_md_atof.
 288         (i370_dc): Convert the 'E' type to 'f' before calling md_atof.
 289         * tc-i386.c (md_atof): Use ieee_md_atof.
 290         * tc-i860.c (md_atof): Use ieee_md_atof.
 291         * tc-i960.c (md_atof): Use ieee_md_atof.
 292         * tc-ia64.c (md_atof): Use the same error message as ieee_md_atof.
 293         * tc-ip2k.c (md_atof): Use ieee_md_atof.
 294         * tc-iq2000.c (md_atof): Use ieee_md_atof.
 295         * tc-m32c.c (md_atof): Use ieee_md_atof.
 296         * tc-m32r.c (md_atof): Use ieee_md_atof.
 297         * tc-m68hc11.c (md_atof): Use ieee_md_atof.
 298         * tc-m68k.c (md_atof): Use ieee_md_atof.
 299         * tc-maxq.c (md_atof): Use ieee_md_atof.
 300         * tc-mcore.c (md_atof): Use ieee_md_atof.
 301         * tc-mep.c (md_atof): Use ieee_md_atof.
 302         * tc-mips.c (md_atof): Use ieee_md_atof.
 303         * tc-mmix.c (md_atof): Use ieee_md_atof.
 304         * tc-mn10200.c (md_atof): Use ieee_md_atof.
 305         * tc-mn10300.c (md_atof): Use ieee_md_atof.
 306         * tc-msp430.c (md_atof): Use ieee_md_atof.
 307         * tc-mt.c (md_atof): Use ieee_md_atof.
 308         * tc-ns32k.c (md_atof): Use ieee_md_atof.
 309         * tc-openrisc.c (md_atof): Use ieee_md_atof.
 310         * tc-or32.c (md_atof): Use ieee_md_atof.
 311         * tc-pdp11.c (md_atof): New function.  Call vax_md_atof.
 312         * tc-pj.c (md_atof): Use ieee_md_atof.
 313         * tc-ppc.c (md_atof): Use ieee_md_atof.
 314         * tc-s390.c (md_atof): Use ieee_md_atof.
 315         * tc-score.c (md_atof): Use ieee_md_atof.
 316         * tc-sh.c (md_atof): Use ieee_md_atof.
 317         * tc-sparc.c (md_atof): Use ieee_md_atof.
 318         * tc-spu.c (md_atof): Use ieee_md_atof.
 319         * tc-tic30.c (md_atof): Use the same error message as ieee_md_atof.
 320         * tc-tic4x.c (md_atof): Use the same error message as ieee_md_atof.
 321         * tc-tic54.c (md_atof): Use ieee_md_atof.
 322         * tc-v850.c (md_atof): Use ieee_md_atof.
 323         * tc-vax.c (md_atof): New function.  Call vax_md_atof.
 324         * tc-xc16x.c (md_atof): Use ieee_md_atof.
 325         * tc-xstormy16.c (md_atof): Use ieee_md_atof.
 326         * tc-xtensa.c (md_atof): Use ieee_md_atof.
 327         * tc-z8k.c (md_atof): Use ieee_md_atof.
 328         * doc/internals.texi: Update description of md_atof function.
 329         * po/gas.pot: Regenerate.
 330
 331 2007-10-16  Bob Wilson  <bob.wilson@acm.org>
 332
 333         * doc/as.texinfo (Overview): Add Xtensa --rename-section option.
 334
 335 2007-10-16  Nick Clifton  <nickc@redhat.com>
 336
 337         * config/obj-elf.c (obj_elf_type): Accept "common" as a valid
 338         symbol type.
 339         * doc/as.texinfo (.type): Document the types accepted by the
 340         type pseudo op, including "common".
 341
 342 2007-10-15  Peter Bergner  <bergner@vnet.ibm.com>
 343
 344         * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
 345         according to major opcode number.
 346
 347 2007-10-15  Alan Modra  <amodra@bigpond.net.au>
 348
 349         * read.c (do_s_func): Check asprintf return status.
 350         * stabs.c (stabs_generate_asm_func): Likewise.
 351         (stabs_generate_asm_endfunc): Likewise.
 352
 353 2007-10-12  H.J. Lu  <hongjiu.lu@intel.com>
 354
 355         * config/tc-i386.c (process_operands): Simplify implicit xmm0
 356         handling.
 357
 358 2007-10-12  H.J. Lu  <hongjiu.lu@intel.com>
 359
 360         * config/tc-i386.c (process_operands): Check the firstxmm0
 361         field in opcode_modifier for instruction with a implicit
 362         xmm0 as the first operand.
 363
 364 2007-10-12  Eric B. Weddington  <eweddington@cso.atmel.com>
 365
 366         * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B,
 367         AT90PWM3B.
 368         * doc/c-avr.texi: Document new devices.
 369
 370 2007-10-12  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 371
 372         * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc>
 373         instruction range information.
 374
 375 2007-10-12  Daniel Jacobowitz  <dan@codesourcery.com>
 376
 377         * doc/as.texinfo (Object Attributes): New chapter.
 378         (Pseudo Ops): Document .gnu_attribute.
 379         (LNS directives): Correct .loc_mark_labels documentation.
 380
 381 2007-10-11  Nick Clifton  <nickc@redhat.com>
 382
 383         * config/obj-elf.c (obj_elf_section): When pushing a section, if
 384         there is a comma then the following argument must be a subsection
 385         number.
 386
 387 2007-10-11  H.J. Lu  <hongjiu.lu@intel.com>
 388
 389         * doc/c-i386.texi: Update which instruction's operands are
 390         swapped.
 391
 392 2007-10-11  Nick Clifton  <nickc@redhat.com>
 393
 394         PR gas/5161
 395         * config/tc-ia64.c: Allow for translations of error and warning
 396         messages.
 397         * po/gas.pot: Regenerate.
 398
 399         PR gas/5158
 400         * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error
 401         message.
 402         * po/gas.pot: Regenerate.
 403
 404         PR gas/5155
 405         * config/tc-msp430.c: Fix spelling typos.
 406
 407 2007-10-11  Nick Clifton  <nickc@redhat.com>
 408
 409         * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
 410
 411 2007-10-08  Maciej W. Rozycki  <macro@linux-mips.org>
 412
 413         * config/tc-mips.c (AT): Rename to...
 414         (ATREG): ... this.
 415         (AT): New definition.
 416         (mips_set_options): Rename "noat" to "at"; change the type.
 417         (mips_opts): Update accordingly.
 418         (append_insn): Likewise.
 419         (macro_build_ldst_constoffset): Likewise.
 420         (load_address): Likewise.
 421         (macro, macro2): Likewise.
 422         (s_mipsset): Handle ".set at=REG".  Update handling of ".set at"
 423         and ".set noat".
 424
 425 2007-10-08  Nick Clifton  <nickc@redhat.com>
 426
 427         * doc/as.texinfo (Previous): Clarify explanation of the behaviour
 428         of this pseudo-op and add a couple of examples.
 429
 430 2007-10-08  Nick Clifton  <nickc@redhat.com>
 431
 432         PR gas/5121 gas/5122 gas/5123
 433         * Makefile.am (CFILES): Add cgen.c
 434         (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
 435         tc-tic4x.c and xtensa-relax.c.
 436         (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
 437         tc-tic4x.h and xtensa-relax.h.
 438         (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
 439         te-ic960.h, te-linux.h.  Add te-aix5.h, te-armeabi.h,
 440         te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
 441         (CONFIG_ATOF_CFILES): New variable.
 442         (POTFILES): Add CONFIG_ATOF_CFILES to dependencies.  Fix typo with
 443         dependency upon TARG_ENV_HFILES.
 444         (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
 445         cgen-desc.h when foo-desc.h does not exit.
 446         Run make dep-am.
 447         * Makefile.in: Regenerate.
 448         * doc/Makefile.in: Regenerate.
 449         * po/POTFILES.in: Regenerate.
 450         PR gas/5124 gas/5125
 451         * po/es.po: Regenerate.
 452         * po/fr.po: Regenerate.
 453         * po/gas.pot: Regenerate.
 454         * po/rw.po: Regenerate.
 455         * po/tr.po: Regenerate.
 456         * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
 457         of error messages.
 458         PR gas/5126
 459         * config/obj-som.c: Likewise.
 460         PR gas/5129
 461         * config/tc-arc.c: Likewise.
 462         PR gas/5131 gas/5132
 463         * config/tc-arm.c: Likewise.
 464         PR gas/5137
 465         * config/tc-bfin.c: Likewise.
 466         PR gas/5143
 467         * config/tc-frv.c: Likewise.
 468         PR gas/5142
 469         * config/tc-dlx.c: Likewise.
 470
 471 2007-10-08  Eric B. Weddington  <eweddington@cso.atmel.com>
 472
 473         * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
 474         ATtiny48, AT90PWM216, AT90PWM316.
 475         * doc/c-avr.texi: Document new devices.
 476
 477 2007-10-08  Nick Clifton  <nickc@redhat.com>
 478
 479         PR gas/5133
 480         * config/tc-arm.c (md_apply_fix): Correct error message.
 481         PR gas/5134
 482         * config/tc-arm.c (md_apply_fix): Likewise.
 483         PR gas/5136
 484         * config/tc-bfin.c (md_apply_fix): Fix error message.
 485         PR gas/5135
 486         (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
 487
 488 2007-10-05  H.J. Lu  <hongjiu.lu@intel.com>
 489
 490         * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
 491         immediate operands directly for instructions with 4 operands.
 492
 493 2007-10-04  H.J. Lu  <hongjiu.lu@intel.com>
 494
 495         PR gas/5109
 496         * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
 497         is ignored in Intel mode.
 498
 499 2007-10-04  Helge Deller  <deller@gmx.de>
 500
 501         * read.c (potable): Add string8, string16, string32 and string64.
 502         Add bit size for stringer function.
 503         (stringer_append_char): New.
 504         (stringer): Use stringer_append_char().
 505         * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
 506         * config/obj-elf.c (obj_elf_ident): Likewise.
 507         * config/tc-alpha.c (s_alpha_stringer): Likewise.
 508         * config/tc-dlx.c (dlx_pseudo_table): Likewise.
 509         * config/tc-hppa.c (pa_stringer): Likewise.
 510         * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
 511         * config/tc-m68hc11.c (md_pseudo_table): Likewise.
 512         * config/tc-mcore.c (md_pseudo_table): Likewise.
 513         * config/tc-mips.c (mips_pseudo_table): Likewise.
 514         * config/tc-spu.c (md_pseudo_table): Likewise.
 515         * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
 516         * doc/as.texinfo (ABORT): Fix identing.
 517         (String): Document new string8, string16, string32, string64
 518         functions.
 519         * NEWS: Mention the new feature.
 520
 521 2007-10-03  Nick Clifton  <nickc@redhat.com>
 522
 523         PR gas/5078
 524         * config/tc-avr.c (avr_get_constant): Extend error message to
 525         mention that the constant must be positive.
 526
 527 2007-10-03  Nick Clifton  <nickc@redhat.com>
 528
 529         * config/tc-avr.c (avr_get_constant):
 530         PR gas/5089
 531         * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
 532         PR gas/5090
 533         (md_assemble): Fix spelling typo.
 534
 535 2007-10-03  Alan Modra  <amodra@bigpond.net.au>
 536
 537         PR 4303
 538         * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
 539
 540 2007-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 541
 542         * config/tc-cr16.c: Replaced 'tabs' with white spaces and
 543         added R_CR16_DISP8 as default reloc type for b<cc> instructions.
 544
 545 2007-09-30  H.J. Lu  <hongjiu.lu@intel.com>
 546
 547         PR gas/5080
 548         * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
 549         (check_qword_reg): Also handle cvttsd2si.
 550
 551 2007-09-27  Kazu Hirata  <kazu@codesourcery.com>
 552
 553         * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
 554         (last_movec_reg): Change to MBO.
 555         * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
 556         (m68k_ip): Use MBO instead of MBO.
 557         (init_table): Use MBO instead of MBO.  Add an entry for mbo.
 558
 559 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 560
 561         * config/tc-i386.c (build_modrm_byte): Also check for RegEip
 562         when considering IP-relative addressing.
 563
 564 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 565
 566         * config/tc-i386.h (md_register_arithmetic): Define.
 567         * config/tc-ia64.h (md_register_arithmetic): Likewise.
 568         * doc/internals.texi: Document md_register_arithmetic.
 569         * expr.c (make_expr_symbol): Force O_register expressions into
 570         reg_section.
 571         (expr): Provide default for md_register_arithmetic. Don't resolve
 572         adding/subtracting constants to/from registers if
 573         md_register_arithmetic is zero.
 574
 575 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 576
 577         * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
 578         (cfi_finish): Add second empty instance.
 579
 580 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 581
 582         * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
 583         with simple call to parse_operand.
 584
 585 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 586
 587         * config/tc-i386.c (NUM_FLAG_CODE): Remove.
 588
 589 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 590
 591         * as.c (itbl_parse): Remove #define.
 592         (struct itbl_file_list): Move down and ...
 593         (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
 594         (show_usage): Conditionalize printing of --itbl option upon
 595         HAVE_ITBL_CPU.
 596         (parse_args): Conditionalize handling of -t/--itbl options upon
 597         HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
 598         't'.
 599
 600 2007-09-25  H.J. Lu  <hongjiu.lu@intel.com>
 601
 602         * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
 603         check opcode length.
 604
 605 2007-09-25  Nathan Sidwell  <nathan@codesourcery.com>
 606
 607         * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
 608         (BRANCHBWPL, FRAG_VAR_SIZE): New.
 609         (md_relax_table): Add BRANCHBWPL entries.
 610         (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
 611         (md_assemble): Use FRAG_VAR_SIZE.
 612         (md_convert_frag_1): Add BRANCHBWPL cases.
 613         (md_estimate_size_before_relaz): Likewise.
 614
 615 2007-09-24  Carlos O'Donell  <carlos@codesourcery.com>
 616
 617         * config/tc-mips.c (s_align): Set max_alignment to 28.
 618
 619 2007-09-20  H.J. Lu  <hongjiu.lu@intel.com>
 620
 621         PR 658
 622         * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
 623         (set_allow_index_reg): New.
 624         (allow_index_reg): Likewise.
 625         (md_pseudo_table): Add "allow_index_reg" and
 626         "disallow_index_reg".
 627         (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
 628         fake index registers.
 629         (i386_scale): Updated.
 630         (i386_index_check): Support fake index registers.
 631         (parse_real_register): Return NULL on eiz/riz if fake index
 632         registers aren't allowed.
 633
 634 2007-09-19  Nick Clifton  <nickc@redhat.com>
 635
 636         * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
 637         fixups.
 638
 639 2007-09-19  Bob Wilson  <bob.wilson@acm.org>
 640
 641         * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
 642
 643 2007-09-18  Bernd Schmidt  <bernd.schmidt@analog.com>
 644
 645         * config/bfin-parse.y (asm_1): Slightly improve error messages
 646         for "reg += const;".
 647
 648 2007-09-18  Alan Modra  <amodra@bigpond.net.au>
 649
 650         PR gas/5026
 651         * read.c (emit_expr): Only use long long if required and available.
 652
 653 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 654
 655         * config/tc-i386.c (baseindex): Removed.
 656         (build_modrm_byte): Check reg_num for RIP register instead of
 657         reg_type.
 658         (i386_index_check): Likewise.
 659
 660 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 661
 662         PR gas/5035
 663         * config/obj-coff.c (obj_coff_endef): Remove checking size of
 664         def_symbol_in_progress.
 665
 666 2007-09-17  Evandro Menezes  <evandro@yahoo.com>
 667
 668         PR gas/5026
 669         * read.c (emit_expr): Use unsigned long long values in warning
 670         message about truncated expressions.
 671
 672 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 673
 674         * config/tc-i386.c (intel_e04): Revert the last change.
 675
 676 2007-09-17  Nick Clifton  <nickc@redhat.com>
 677
 678         * po/es.po: Updated Spanish translation.
 679
 680 2007-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 681
 682         PR gas/5034
 683         * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
 684         T_NIL.
 685
 686 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 687
 688         * config/tc-i386.c (build_modrm_byte): Adjust comment line
 689         wrap.
 690
 691 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 692
 693         * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
 694         of (A || B) != 0.
 695
 696 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 697
 698         * config/tc-i386.c (build_modrm_byte): Adjust indentation.
 699
 700 2007-09-14  Michael Meissner  <michael.meissner@amd.com>
 701             Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 702             Tony Linthicum  <tony.linthicum@amd.com>
 703
 704         * NEWS: Add SSE5 support to NEWS file.
 705
 706         * config/tc-i386.h (drex_byte): Add fields to allow process_drex
 707         and build_modrm_byte to communicate.
 708         (DREX_OC0): New SSE5 macro.
 709         (DREX_OC0_MASK): Ditto.
 710         (DREX_OC1): Ditto.
 711         (DREX_OC1_MASK): Ditto.
 712         (DREX_XMEM_X1_X2_X2): Ditto.
 713         (DREX_X1_XMEM_X2_X2): Ditto.
 714         (DREX_X1_XMEM_X2_X1: Ditto.
 715         (DREX_X1_X2_XMEM_X1: Ditto.
 716         (DREX_XMEM_X1_X2): Ditto.
 717         (DREX_X1_XMEM_X2): Ditto.
 718         (drex_byte): New structure to describe the DREX byte.
 719
 720         * config/tc-i386.c (process_drex): New function to handle SSE5
 721         DREX bits.
 722         (build_modrm_byte): Use the information cached away in
 723         process_drex in the case of DREX instructions.
 724         (i386_insn): Add drex field.
 725         (pi): Add debugging of drex field.
 726         (md_assemble): Treat SSE5 like SSE3 in instructions with an
 727         immediate byte.  Move REX field to DREX if this is a DREX
 728         instruction.
 729         (process_operands): Add SSE5 support.
 730         (build_modrm_byte): Ditto.
 731         (output_insn): Ditto.
 732         (cpu_arch): Ditto.
 733         (i386_align_code): Ditto.
 734
 735 2007-09-12  Jan Beulich  <jbeulich@novell.com>
 736
 737         * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
 738         after generic operand swapping, and swap only the immediate operands.
 739
 740 2007-09-11  Nathan Sidwell  <nathan@codesourcery.com>
 741
 742         * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
 743         (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
 744
 745 2007-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 746
 747         * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
 748         byte opcode.
 749
 750 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 751
 752         * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
 753         (cpu_flags_check_cpu64): This. Inline.
 754         (uints_all_zero): New.
 755         (uints_set): Likewise
 756         (uints_equal): Likewise
 757         (UINTS_ALL_ZERO): Likewise
 758         (UINTS_SET): Likewise
 759         (UINTS_CLEAR): Likewise
 760         (UINTS_EQUAL): Likewise
 761         (cpu_flags_and): Likewise.
 762         (cpu_flags_or): Likewise.
 763         (operand_type_and): Likewise.
 764         (operand_type_or): Likewise.
 765         (operand_type_xor): Likewise.
 766         (cpu_flags_not): Inline and use switch instead of loop.
 767         (cpu_flags_match): Updated.
 768         (operand_type_match): Likewise.
 769         (smallest_imm_type): Likewise.
 770         (set_cpu_arch): Likewise.
 771         (pt): Likewise.
 772         (md_assemble): Likewise.
 773         (parse_insn): Likewise.
 774         (optimize_imm): Likewise.
 775         (match_template): Likewise.
 776         (process_suffix): Likewise.
 777         (update_imm): Likewise.
 778         (finalize_imm): Likewise.
 779         (process_operands): Likewise.
 780         (build_modrm_byte): Likewise.
 781         (i386_immediate): Likewise.
 782         (i386_displacement): Likewise.
 783         (i386_index_check): Likewise.
 784         (i386_operand): Likewise.
 785         (i386_target_format): Likewise.
 786         (intel_e11): Likewise.
 787         (operand_type): Remove implicitregister.
 788         (operand_type_check): Updated. Inline.
 789         (cpu_flags_all_zero): Removed.
 790         (operand_type_all_zero): Likewise.
 791         (i386_array_biop): Likewise.
 792         (cpu_flags_biop): Likewise.
 793         (operand_type_biop): Likewise.
 794
 795 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 796
 797         * Makefile.am: Run "make dep-am".
 798         * Makefile.in: Regenerate.
 799
 800 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 801
 802         * configure.in (AC_CHECK_HEADERS): Add limits.h.
 803         * configure: Regenerated.
 804         * config.in: Likewise.
 805
 806         * config/tc-i386.c: Include "opcodes/i386-init.h".
 807         (_i386_insn): Use i386_operand_type for types.
 808         (cpu_arch_flags): Updated to new types with bitfield.
 809         (cpu_arch_tune_flags): Likewise.
 810         (cpu_arch_isa_flags): Likewise.
 811         (cpu_arch): Likewise.
 812         (i386_align_code): Likewise.
 813         (set_code_flag): Likewise.
 814         (set_16bit_gcc_code_flag): Likewise.
 815         (set_cpu_arch): Likewise.
 816         (md_assemble): Likewise.
 817         (parse_insn): Likewise.
 818         (process_operands): Likewise.
 819         (output_branch): Likewise.
 820         (output_jump): Likewise.
 821         (parse_real_register): Likewise.
 822         (mode_from_disp_size): Likewise.
 823         (smallest_imm_type): Likewise.
 824         (pi): Likewise.
 825         (type_names): Likewise.
 826         (pt): Likewise.
 827         (pte): Likewise.
 828         (swap_2_operands): Likewise.
 829         (optimize_imm): Likewise.
 830         (optimize_disp): Likewise.
 831         (match_template): Likewise.
 832         (check_string): Likewise.
 833         (process_suffix): Likewise.
 834         (check_byte_reg): Likewise.
 835         (check_long_reg): Likewise.
 836         (check_qword_reg): Likewise.
 837         (check_word_reg): Likewise.
 838         (finalize_imm): Likewise.
 839         (build_modrm_byte): Likewise.
 840         (output_insn): Likewise.
 841         (disp_size): Likewise.
 842         (imm_size): Likewise.
 843         (output_disp): Likewise.
 844         (output_imm): Likewise.
 845         (gotrel): Likewise.
 846         (i386_immediate): Likewise.
 847         (i386_displacement): Likewise.
 848         (i386_index_check): Likewise.
 849         (i386_operand): Likewise.
 850         (parse_real_register): Likewise.
 851         (i386_intel_operand): Likewise.
 852         (intel_e09): Likewise.
 853         (intel_bracket_expr): Likewise.
 854         (intel_e11): Likewise.
 855         (cpu_arch_flags_not): New.
 856         (cpu_flags_check_x64): Likewise.
 857         (cpu_flags_all_zero): Likewise.
 858         (cpu_flags_not): Likewise.
 859         (i386_cpu_flags_biop): Likewise.
 860         (cpu_flags_biop): Likewise.
 861         (cpu_flags_match); Likewise.
 862         (acc32): New.
 863         (acc64): Likewise.
 864         (control): Likewise.
 865         (reg16_inoutportreg): Likewise.
 866         (disp16): Likewise.
 867         (disp32): Likewise.
 868         (disp32s): Likewise.
 869         (disp16_32): Likewise.
 870         (anydisp): Likewise.
 871         (baseindex): Likewise.
 872         (regxmm): Likewise.
 873         (imm8): Likewise.
 874         (imm8s): Likewise.
 875         (imm16): Likewise.
 876         (imm32): Likewise.
 877         (imm32s): Likewise.
 878         (imm64): Likewise.
 879         (imm16_32): Likewise.
 880         (imm16_32s): Likewise.
 881         (imm16_32_32s): Likewise.
 882         (operand_type): Likewise.
 883         (operand_type_check): Likewise.
 884         (operand_type_match): Likewise.
 885         (operand_type_register_match): Likewise.
 886         (update_imm): Likewise.
 887         (set_code_flag): Also update cpu_arch_flags_not.
 888         (set_16bit_gcc_code_flag): Likewise.
 889         (md_begin): Likewise.
 890         (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
 891         Use cpu_flags_match to match instructions.
 892         (i386_target_format): Update cpu_arch_isa_flags and
 893         cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
 894         (smallest_imm_type): Check cpu_arch_tune to tune for i486.
 895         (match_template): Don't initialize overlap0, overlap1,
 896         overlap2, overlap3 and operand_types.
 897         (process_suffix): Handle crc32 with 64bit register.
 898         (MATCH): Removed.
 899         (CONSISTENT_REGISTER_MATCH): Likewise.
 900
 901         * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
 902         type.
 903
 904 2007-09-06  H.J. Lu  <hongjiu.lu@intel.com>
 905
 906         * config/tc-i386.c (match_template): Handle invlpga, vmload,
 907         vmrun and vmsave in SVME.
 908         (process_suffix): Likewise.
 909
 910 2007-09-05  H.J. Lu  <hongjiu.lu@intel.com>
 911
 912         * config/tc-i386.c (i386_index_check): Don't use RegRex
 913         on the reg_type field.
 914         (parse_real_register): Use `||' instead of `|'.
 915
 916 2007-09-04  H.J. Lu  <hongjiu.lu@intel.com>
 917
 918         * config/tc-i386.c (process_operands): Remove segment override
 919         check on SVME instructions.
 920         (i386_index_check): Remove memory operand check on SVME
 921         instructions.
 922
 923 2007-09-04  Alan Modra  <amodra@bigpond.net.au>
 924
 925         * config/tc-spu.c (struct spu_insn): Delete "flag".  Add "reloc".
 926         (md_assemble): Update init of insn.  Use insn.reloc instead of
 927         calculating from flag.
 928         (get_imm): Set reloc rather than flag.
 929         (calcop): Formatting.
 930
 931 2007-08-29  Daniel Jacobowitz  <dan@codesourcery.com>
 932
 933         * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
 934
 935 2007-08-28  Daniel Jacobowitz  <dan@codesourcery.com>
 936
 937         * doc/c-arc.texi: Fix typo.
 938
 939 2007-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 940
 941         * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
 942         Intel mode.
 943
 944 2007-08-28  Nathan Sidwell  <nathan@codesourcery.com>
 945
 946         * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
 947         (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
 948         (mcf5407_ctrl): New.
 949         (m68k_cpus): Adjust 5407 entry.
 950
 951 2007-08-28  Maxim Kuvyrkov  <maxim@codesourcery.com>
 952
 953         * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
 954         (m68k_cpus): Define 51QE cpu.
 955
 956 2007-08-28  Mark Shinwell  <shinwell@codesourcery.com>
 957             Joseph Myers  <joseph@codesourcery.com>
 958
 959         * as.c (main): Flush stderr before printing listings to ensure
 960         consistent output order across platforms.
 961
 962 2007-08-28  Robert Sebastian Gerus  <arachnist@gmail.com>
 963
 964         * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
 965
 966 2007-08-24  Joseph Myers  <joseph@codesourcery.com>
 967             Paul Brook  <paul@codesourcery.com>
 968
 969         * remap.c: New.
 970         * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
 971         * as.c (show_usage): Document --debug-prefix-map option.
 972         (parse_args): Handle --debug-prefix-map.
 973         * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
 974         * stabs.c (stabs_generate_asm_file): Remap debug paths.
 975         * Makefile.am (GAS_CFILES): Add remap.c
 976         (GENERIC_OBJS): Add remap.o.
 977         Regenerate dependencies.
 978         * Makefile.in: Regenerate.
 979         * doc/as.texinfo (--debug-prefix-map): Document.
 980
 981 2007-08-24  Aurelien Jarno  <aurel32@debian.org>
 982
 983         * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
 984         before printing them.
 985
 986 2007-08-24  Anders Waldenborg  <anders@0x63.nu>
 987             Alan Modra  <amodra@bigpond.net.au>
 988
 989         * config/tc-i386.c (lex_got): Don't scan past a comma.
 990
 991 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 992
 993         * config/tc-ppc.c (parse_cpu): Handle "750cl".
 994         (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
 995         (md_show_usage): Document -m750cl.
 996         (md_assemble): Handle two delimiters in succession (eg. `),').
 997         * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
 998         * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
 999         * testsuite/gas/ppc/ppc750ps.s: New file.
1000         * testsuite/gas/ppc/ppc750ps.d: Likewise.
1001
1002 2007-08-23  Ben Elliston  <bje@au.ibm.com>
1003
1004         * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
1005
1006 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
1007
1008         PR gas/4079
1009         * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
1010         expressions.
1011         (i386_immediate): Detect and complain about more cases of
1012         invalid immediate expressions.  Return failure rather than
1013         converting them to zero.
1014         (i386_displacement): Likewise.
1015
1016 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
1017
1018         * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
1019
1020 2007-08-14  Andreas Schwab  <schwab@suse.de>
1021
1022         * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
1023         unrepresentable.
1024
1025 2007-08-12  Matthias Klose  <doko@ubuntu.com>
1026
1027         * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
1028         $(top_srcdir)/../../bfd/doc.
1029         * doc/Makefile.in: Regenerate.
1030
1031 2007-08-10  Nick Clifton  <nickc@redhat.com>
1032
1033         * NEWS: Add a marker for the 2.18 features.
1034
1035 2007-08-09  Paul Brook  <paul@codesourcery.com>
1036
1037         * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
1038
1039 2007-08-09  H.J. Lu  <hongjiu.lu@intel.com>
1040
1041         * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
1042
1043 2007-07-29  H.J. Lu  <hongjiu.lu@intel.com>
1044
1045         * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
1046         DWORD memory to Reg64 in Intel synax.
1047         (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
1048         Reg32 in Intel syntax.
1049
1050 2007-07-25  Sterling Augustine  <sterling@tensilica.com>
1051
1052         * config/tc-xtensa.c (xtensa_extui_opcode): New.
1053         (xg_expand_assembly_insn): Check for invalid extui operands.
1054         (md_begin): Initialize xtensa_extui_opcode.
1055
1056 2007-07-24  Nick Clifton  <nickc@redhat.com>
1057
1058         * config/tc-mep.h (skip_whitespace): Remove definition.
1059
1060 2007-07-23  H.J. Lu  <hongjiu.lu@intel.com>
1061
1062         * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
1063         (f32_15): Removed.
1064         (jump_31): New.
1065         (f32_patt): Remove f32_15.
1066         (f16_patt): Likewise.
1067         (i386_align_code): Updated to alt_long_patt for 64bit by
1068         default.
1069
1070         * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
1071
1072 2007-07-23  Evandro Menezes  <evandro.menezes@amd.com>
1073
1074         * config/tc-i386.c (i386_align_code): Enable alignment up to
1075         MAX_MEM_FOR_RS_ALIGN_CODE bytes.  Remove special treatment
1076         for K8.
1077
1078         * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
1079
1080 2007-07-20  Nick Clifton  <nickc@redhat.com>
1081
1082         * app.c (do_scrub_chars): Provide a one character buffer to hold a
1083         pushed back newline at the end of an unterminated quoted string.
1084
1085 2007-07-14  Nick Clifton  <nickc@redhat.com>
1086
1087         * config/tc-arm.c (create_register_alias): Return a boolean rather
1088         than an integer.
1089         Check the return value of insert_reg_alias and do not continue to
1090         create aliases once an insertion has failed.
1091         (s_unreq): Delete the all-upper-case and all-lower-case
1092         alternatives as well.
1093
1094 2007-07-12  Kai Tietz   <kai.tietz@onevision.com>
1095
1096         * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
1097         * write.c: Likewise.
1098
1099 2007-07-11  Daniel Jacobowitz  <dan@codesourcery.com>
1100
1101         * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
1102         HAVE_64BIT_SYMBOLS.
1103
1104 2007-07-04  Richard Sandiford  <richard@codesourcery.com>
1105
1106         * config/tc-mips.c (mips_cpu_info_table): Add new entries for
1107         {24k,24ke,34k,74k}f{2_1,1_1,x}.  Also add an entry for 74kf3_2.
1108         Deprecate *x and *fx.
1109         * doc/c-mips.texi: Document the new CPU arguments.  Deprecate
1110         *x and *fx.
1111
1112 2007-07-04  H.J. Lu  <hongjiu.lu@intel.com>
1113
1114         * config/obj-coff.h (x86_64_target_format): Renamed to ...
1115         (i386_target_format): This
1116         (TARGET_FORMAT): Use i386_target_format.
1117
1118         * config/tc-i386.c (x86_64_target_format): Removed.
1119         (i386_target_format): Handle PE formats.
1120
1121 2007-07-04  Nick Clifton  <nickc@redhat.com>
1122
1123         * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
1124         to get the right length of printed value.
1125
1126 2007-07-03  Nick Clifton  <nickc@redhat.com>
1127
1128         * COPYING: Replace with GPLv3 text.
1129         * app.c: Update copyright notice to refer to GPLv3.
1130         * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
1131         cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
1132         dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
1133         emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
1134         flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
1135         input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
1136         itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
1137         macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
1138         read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
1139         symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
1140         config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
1141         config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
1142         config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
1143         config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
1144         config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
1145         config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
1146         config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
1147         config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
1148         config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
1149         config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
1150         config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
1151         config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
1152         config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
1153         config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
1154         config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
1155         config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
1156         config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
1157         config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
1158         config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
1159         config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
1160         config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
1161         config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
1162         config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
1163         config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
1164         config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
1165         config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
1166         config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
1167         config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
1168         config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
1169         config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
1170         config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
1171         config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
1172         config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
1173         config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
1174         config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
1175         config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
1176         config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
1177         config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
1178         config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
1179         config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
1180         config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
1181         config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
1182         config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
1183         config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
1184         config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
1185         config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
1186         config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
1187         config/te-netware.h, config/te-sparcaout.h,  config/te-tmips.h,
1188         config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
1189         config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
1190
1191         * flonum-mult.c: Likewise, and also correct typo referring to
1192         non-existant GNU Assembler General Public License.
1193         * config/tc-m68851.h: Likewise.
1194         * NEWS: Mention the new license.  Also note where the 2.17 release
1195         happened.
1196         * config/e-crisaout.c: Add copyright header.
1197         * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
1198         config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
1199         config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
1200         config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
1201         config/te-generic.h, config/te-gnu.h, config/te-go32.h,
1202         config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
1203         config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
1204         config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
1205         config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
1206         config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
1207         config/te-pep.h, config/te-psos.h, config/te-riscix.h,
1208         config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
1209         config/te-wince-pe.h: Likewise.
1210
1211 2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
1212
1213         * config/tc-m68k.c (m68k_ip): Add j & K operand types.
1214         (install_operand): Add E encoding.
1215         (md_begin): Check and skip initial '.' arg character.
1216         (get_num): Add 0..511 case.
1217
1218 2007-07-03  Alan Modra  <amodra@bigpond.net.au>
1219
1220         PR 4713
1221         * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
1222         * config/obj-elf.h (obj_ecoff_set_ext): Comment.
1223
1224 2007-07-03  Mikkel Lauritsen  <renard@nospam.dk>
1225
1226         PR 4722
1227         * app.c (do_scrub_chars <state 5>): Check for output buffer full
1228         after memcpy.
1229
1230 2007-07-02  Joseph Myers  <joseph@codesourcery.com>
1231
1232         * config/tc-mips.c (s_dtprelword, s_dtpreldword,
1233         s_dtprel_internal): New.
1234         (mips_pseudo_table): Add .dtprelword and .dtpreldword.
1235         (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
1236         BFD_RELOC_MIPS_TLS_DTPREL64.
1237
1238 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
1239
1240         * Makefile.am: Run "make dep-am".
1241         * Makefile.in: Regenerate.
1242         * aclocal.m4: Regenerate.
1243         * config.in: Regenerate.
1244         * doc/Makefile.in: Regenerate.
1245         * po/POTFILES.in: Regenerate.
1246         * po/gas.pot: Regenerate.
1247
1248 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
1249
1250         * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
1251         coff section flag values to bfd section flag.
1252
1253 2007-06-30  H.J. Lu  <hongjiu.lu@intel.com>
1254
1255         * aclocal.m4: Regenerated.
1256         * doc/Makefile.in: Likewise.
1257         * Makefile.in: Likewise.
1258
1259 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
1260
1261         * as.c (main): Only call create_obj_attrs_section if IS_ELF.
1262
1263 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
1264
1265         * as.c (create_obj_attrs_section): New.
1266         (main): Call create_obj_attrs_section for ELF.
1267         * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
1268         skip_past_comma, s_vendor_attribute): New.
1269         (potable): Add gnu_attribute for ELF.
1270         * read.h (s_vendor_attribute): Declare.
1271         * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
1272         round s_vendor_attribute.
1273         (aeabi_set_public_attributes): Update for new attributes
1274         interfaces.
1275         (arm_md_end): Remove attributes contents setting now done
1276         generically.
1277
1278 2007-06-29  M R Swami Reddy  <MR.Swami.Redd@nsc.com>
1279
1280         * Makefile.am: Add CR16 related entry.
1281         * Makefile.in: Regenerate.
1282         * config/tc-cr16.h: New file
1283         * config/tc-cr16.c: New file
1284         * doc/c-cr16.texi: New file for cr16
1285         * doc/all.texi: Entry for cr16
1286         * doc/Makefile.am: Added c-cr16.texi
1287         * doc/Makefile.in: Regenerate
1288         * doc/as.texinfo: Entry for CR16 target
1289         * NEWS: Announce the support for the new target.
1290
1291 2007-06-26  Paul Brook  <paul@codesourcery.com>
1292
1293         * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
1294         for OP_RVC.
1295         (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
1296
1297 2007-06-25  H.J. Lu  <hongjiu.lu@intel.com>
1298
1299         * config/tc-i386.c (process_operands): Replace regKludge
1300         with RegKludge.
1301
1302 2007-06-25  Richard Sandiford  <richard@codesourcery.com>
1303
1304         * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
1305         * config/tc-mips.c (append_insn): Record which symbols have
1306         R_MIPS16_26 relocations against them.
1307         (mips_fix_adjustable): Don't reduce relocations against such symbols.
1308
1309 2007-06-22  Sterling Augustine  <sterling@tensilica.com>
1310
1311         * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
1312         (frag_format_size): Handle RELAX_IMMED_STEP3.
1313         (xtensa_relax_frag, md_convert_frag): Likewise.
1314         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
1315         (RELAX_IMMED_MAXSTEPS): Adjust.
1316         * config/xtensa-relax.c (widen_spec_list): Add transitions from
1317         wide branches to branch-over-jumps.
1318         (build_transition): Handle wide branches in transition patterns.
1319
1320 2007-06-22  H.J. Lu  <hongjiu.lu@intel.com>
1321
1322         * config/tc-i386.c (disp_size): New.
1323         (imm_size): Likewise.
1324         (output_disp): Use disp_size and imm_size.
1325         (output_imm): Use imm_size.
1326
1327 2007-06-19  Sterling Augustine  <sterling@tensilica.com>
1328
1329         * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
1330         use of literal_frag field.
1331         * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
1332         in the literal_frag field.
1333         (xtensa_move_literals): Use it here instead of searching.  Update
1334         literal_frag field with new value.
1335
1336 2007-06-14  Paul Brook  <paul@codesourcery.com>
1337
1338         * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
1339         narrow shift by immediate.
1340
1341 2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>
1342
1343         * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
1344
1345         * acinclude.m4: Don't include m4 files.
1346         (BFD_BINARY_FOPEN): Removed.
1347         Remove libtool kludge.
1348
1349         * Makefile.in: Regenerated.
1350         * doc/Makefile.in: Likewise.
1351         * aclocal.m4: Likewise.
1352         * configure: Likewise.
1353
1354 2007-06-11  Sterling Augustine  <sterling@tensilica.com>
1355             Bob Wilson  <bob.wilson@acm.org>
1356
1357         * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
1358         (XTENSA_PROP_NO_TRANSFORM): ...this.
1359         (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
1360         (xtensa_mark_frags_for_org): New.
1361         (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
1362         (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
1363         (get_frag_property_flags): Adjust reference to is_no_transform flag.
1364         (xtensa_frag_flags_combinable): Likewise.
1365         (frag_flags_to_number): Likewise.  Use XTENSA_PROP_NO_TRANSFORM.
1366         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
1367
1368 2007-06-06  Paul Brook  <paul@codesourcery.com>
1369
1370         * config/tc-arm.c (s_align): Pad code sections appropriately.
1371
1372 2007-06-05  Paul Brook  <paul@codesourcery.com>
1373
1374         * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
1375
1376 2007-06-05  Nick Clifton  <nickc@redhat.com>
1377
1378         PR gas/4587
1379         * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
1380
1381 2007-06-05  Alan Modra  <amodra@bigpond.net.au>
1382
1383         * config/tc-spu.c (spu_cons): Use deferred_expression.  Handle
1384         number@ppu.
1385         (tc_gen_reloc): Abort if neither addsy or subsy is set.
1386         (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
1387         * config/tc-spu.h (md_operand): Handle @ppu without sym.
1388
1389 2007-05-31  Paul Brook  <paul@codesourcery.com>
1390
1391         * config/tc-arm.c (insns): Allow strex on M profile cores.
1392
1393 2007-05-29  David S. Miller  <davem@davemloft.net>
1394             Jakub Jelinek  <jakub@redhat.com>
1395
1396         PR gas/4558
1397         * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
1398         for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
1399
1400 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1401
1402         * config/tc-spu.h: Wrap in #ifndef/#endif.  Delete coff macros.
1403
1404 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1405
1406         * config/tc-ppc.c: Convert to ISO C.
1407         * config/tc-ppc.c: Likewise.
1408
1409 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1410
1411         * write.h (EXEC_MACHINE_TYPE): Delete.
1412         (string_byte_count, section_alignment): Delete.
1413
1414 2007-05-28  Nathan Sidwell  <nathan@codesourcery.com>
1415
1416         * app.c (do_scrub_chars): Cope with \ at end of buffer.
1417
1418 2007-05-26  Alan Modra  <amodra@bigpond.net.au>
1419
1420         * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1421         top 32 bits of 64 bit value if so doing results in passing
1422         range check.  Rewrite sign extension fudges similarly.  Enable
1423         fudges for powerpc64 too.  Report user value if range check
1424         fails rather than fudged value.  Negate PPC_OPERAND_NEGATIVE
1425         range rather than value, also to report user value on failure.
1426
1427 2007-03-25  Paul Brook  <paul@codesourcery.com>
1428
1429         * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1430         (do_t_add_sub): Correctly encode subs pc, lr, #const.
1431         (do_t_mov_cmp): Correctly encode movs pc, lr.
1432
1433 2007-05-24  Steve Ellcey  <sje@cup.hp.com>
1434
1435         * Makefile.in: Regnerate.
1436         * configure: Regenerate.
1437         * aclocal.m4: Regenerate.
1438         * doc/Makefile.in: Regenerate.
1439
1440 2007-05-22  Bob Wilson  <bob.wilson@acm.org>
1441
1442         * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1443         and index entries about automatic alignment of ENTRY instructions.
1444
1445 2007-05-22  Nick Clifton  <nickc@redhat.com>
1446
1447         * doc/as.texinfo: Use @copying around the copyright notice.
1448
1449 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
1450
1451         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1452         containing a comma.
1453
1454 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
1455
1456         PR gas/4517
1457         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
1458         * doc/as.texinfo: Document new directives: .cfi_restore,
1459         .cfi_undefined, .cfi_same_value, .cfi_return_column,
1460         .cfi_remember_state and .cfi_restore_state.
1461
1462 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
1463
1464         * config/tc-m68k.c (md_apply_fix): Show value of out of range
1465         fixups in error message.
1466         (md_conver_frag_1): Propagate the fix source location and use
1467         as_bad_where rather than fatal, for better error messages.
1468
1469 2007-05-16  Paul Brook  <paul@codesourcery.com>
1470
1471         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1472
1473 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
1474
1475         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1476
1477 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
1478
1479         PR gas/3041
1480         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1481         addend is stored for relocs against weak symbols.
1482         (md_apply_fix): So not loose track of addend for relocs against
1483         weak symbols.
1484
1485 2007-05-14  Thiemo Seufer  <ths@mips.com>
1486
1487         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1488
1489 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
1490
1491         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1492         addri, addri.c, subi, and subi.c when immediate number is hex.
1493         (score_insns): Remove subis and subis.c.
1494         (do_sub_rdi16): Delete.
1495
1496 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
1497
1498         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
1499         spu_cons for word.
1500         (md_assemble): Tidy use of insn.flag.
1501         (get_imm): Likewise.  Handle uppercase input too.
1502         (spu_cons): New function.
1503         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1504         (TC_FORCE_RELOCATION): Don't resolve them either.
1505
1506 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
1507
1508         * config/tc-arm.c (md_apply_fix): Generate more accurate
1509         diagnostic when 8-bit immediate range is exceeded for
1510         BFD_RELOC_ARM_OFFSET_IMM8.
1511
1512 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
1513
1514         PR gas/4460
1515         * config/tc-i386.c (lex_got): Don't replace the reloc token with
1516         a space if we already have a space.
1517
1518 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
1519
1520         * config/tc-i386.c (match_template): Don't explicitly check
1521         suffix for crc32 in Intel mode.
1522         (process_suffix): Issue an error for crc32 if the operand size
1523         is ambiguous.
1524
1525 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
1526             Nick Clifton  <nickc@redhat.com>
1527
1528         PR gas/3041
1529         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1530         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1531         (md_apply_fix): Put zero values into the frags referencing weak
1532         symbols.
1533
1534 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
1535
1536         PR 4448
1537         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1538         PPC_OPERAND_PLUS1.
1539
1540 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
1541
1542         * config/tc-i386.c (match_template): Check suffix for crc32 in
1543         Intel mdoe.
1544         (process_suffix): Default the suffix of 8bit crc32 to
1545         BYTE_MNEM_SUFFIX.
1546         (check_byte_reg): Skip check for 8bit crc32.
1547
1548 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
1549
1550         * config/tc-i386.c (md_assemble): Use register_prefix in
1551         error/warning message.
1552         (check_byte_reg): Likewise.
1553         (check_long_reg): Likewise.
1554         (check_qword_reg): Likewise.
1555         (check_word_reg): Likewise.
1556         (process_operands): Likewise.
1557
1558 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
1559
1560         PR 4436
1561         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1562         min > max.
1563
1564 2007-04-28  Thiemo Seufer  <ths@networkno.de>
1565
1566         * config/tc-mips.c: Fix comment.
1567
1568 2007-04-26  Anatoly Sokolov <aesok@post.ru>
1569
1570         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1571         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1572         * doc/c-avr.texi: Document new devices.
1573
1574 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
1575
1576         * Makefile.am: Run "make dep-am".
1577         * Makefile.in: Regenerate.
1578
1579 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
1580
1581         * config/tc-m68k.c (mcf54455_ctrl): New.
1582         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1583         (m68k_archs): Add isac.
1584         (m68k_cpus): Add 54455 family.
1585         (m68k_ip): Split Bg into Bb, Bs, Bg.
1586         (m68k_elf_final_processing): Add ISA_C.
1587         * doc/c-m68k.texi (M680x0 Options): Add isac.
1588
1589 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
1590
1591         * read.c (read_a_source_file): Skip multiple spaces to
1592         cover hack in mmix md_start_line_hook which overwrites a
1593         colon with a space.  Delete sermon and needless assertion.
1594
1595 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1596
1597         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1598         (md_atof): Make number_of_chars unsigned.  Revert last change.
1599         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1600         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1601         * config/tc-sh.h (md_optimize_expr): Likewise.
1602         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1603         assertion.
1604         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1605
1606 2007-04-21  Nick Clifton  <nickc@redhat.com>
1607
1608         * config/atof-vax.c (md_atof): Fix comparison inside know().
1609
1610         * config/tc-ia64.c (emit_one_bundle): Fix typo.
1611
1612 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1613
1614         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1615         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1616         Don't skip over NUL char.
1617         (pseudo_set): Set X_op for registers to O_register.
1618         * symbols.c (symbol_clone): Remove assertion that sym is defined.
1619         (resolve_symbol_value): Resolve O_register symbols.
1620         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1621         Instead find st(0) by hash lookup.
1622         * config/tc-ppc.c (ppc_macro): Warning fix.
1623
1624         * as.h (ENABLE_CHECKING): Default define to 0.
1625         (know): Assert if ENABLE_CHECKING.
1626         (struct relax_type): Remove superfluous declaration.
1627         * configure.in (--enable-checking): New.
1628         * configure: Regenerate.
1629         * config.in: Regenerate.
1630         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1631         Check for duplicate powerpc_operands entries.
1632
1633 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
1634
1635         * config/tc-m68k.c (mcf5253_ctrl): New.
1636         (mcf52223_ctrl): New.
1637         (m68k_cpus): Add 5253, 52221, 52223.
1638
1639         * config/m68k-parse.h (RAMBAR_ALT): New.
1640         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1641         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1642         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1643         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1644         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1645         RAMBAR1.
1646         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1647         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1648         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
1649         to control register mapping.
1650
1651 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1652
1653         * messages.c (as_internal_value_out_of_range): Fix typo in
1654         error message.  Return after printing domain error.
1655         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1656         in max when shifting right.
1657
1658 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1659
1660         * messages.c (as_internal_value_out_of_range): Extend to report
1661         errors for values with invalid low bits set.
1662         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1663         fields.  Check that operands and opcode fields are disjoint.
1664         (ppc_insert_operand): Check operands using mask rather than bit
1665         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
1666         insertion code.
1667         (md_apply_fix): Adjust for struct powerpc_operand change.
1668
1669 2007-04-19  Paul Brook  <paul@codesourcery.com>
1670
1671         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1672         Thumb-1.  Add sanity check for bogus relaxations.
1673
1674 2007-04-19  Paul Brook  <paul@codesourcery.com>
1675
1676         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1677
1678 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
1679
1680         * Makefile.am: Run "make dep-am".
1681         * Makefile.in: Regenerate.
1682
1683 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
1684
1685         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1686
1687 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1688
1689         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1690
1691 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1692
1693         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1694         (match_template): Handle operand size for crc32 in SSE4.2.
1695         (process_suffix): Handle operand type for crc32 in SSE4.2.
1696         (output_insn): Support SSE4.2.
1697
1698 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1699
1700         * config/tc-i386.c (cpu_arch): Add .sse4.1.
1701         (process_operands): Adjust implicit operand for blendvpd,
1702         blendvps and pblendvb in SSE4.1.
1703         (output_insn): Support SSE4.1.
1704
1705 2007-04-18  Paul Brook  <paul@codesourcery.com>
1706
1707         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1708
1709 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1710
1711         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
1712         of as_warn_where for misaligned data.
1713
1714 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1715
1716         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1717         rs_fill frags.
1718
1719 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
1720
1721         * Makefile.am: Add ACLOCAL_AMFLAGS.
1722         * Makefile.in: Regenerate.
1723
1724 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1725
1726         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1727         (sh_optimize_expr): Likewise.
1728         * config/tc-sh.h (md_optimize_expr): Define.
1729         (sh_optimize_expr): Prototype.
1730
1731 2007-04-06  Matt Thomas  <matt@netbsd.org>
1732
1733         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1734         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
1735         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
1736
1737 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
1738
1739         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1740
1741 2007-04-04  Paul Brook  <paul@codesourcery.com>
1742
1743         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1744         (insns): Use I15 for vext.
1745
1746 2007-04-04  Paul Brook  <paul@codesourcery.com>
1747
1748         * configure.tgt: Loosen checks for arm uclinux eabi targets.
1749
1750 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
1751
1752         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1753         outputting_stabs_line_debug.
1754
1755 2007-03-26  Anatoly Sokolov <aesok@post.ru>
1756
1757         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1758         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1759         devices.
1760         * doc/c-avr.texi: Document new devices.
1761
1762 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
1763
1764         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1765         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1766         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1767
1768 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
1769             Bob Wilson  <bob.wilson@acm.org>
1770
1771         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1772         Do not check is_loop_target flag.
1773         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1774         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
1775         xtensa_move_labels for alignment of loop opcodes.
1776
1777 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
1778
1779         * config/tc-i386.c (process_suffix): Reindent a bit.
1780
1781 2007-03-30  Paul Brook  <paul@codesourcery.com>
1782
1783         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1784         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
1785         (do_t_push_pop):  Use encode_thumb2_ldmstm.
1786
1787 2007-03-29  DJ Delorie  <dj@redhat.com>
1788
1789         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1790         (md_relax_table): Add entries for ADJNZ macros.
1791         (M32C_Macros): Add ADJNZ macros.
1792         (subtype_mappings): Add entries for ADJNZ macros.
1793         (insn_to_subtype): Check for adjnz and sbjnz insns.
1794         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1795         (md_convert_frag): Convert adjnz and sbjnz.
1796
1797 2007-03-29  Nick Clifton  <nickc@redhat.com>
1798
1799         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1800         initialization.
1801         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1802         using ITBL_NUMBER_OF_PROCESSORS.
1803         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1804
1805 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
1806
1807         * config/tc-i386.c (build_modrm_byte): For instructions with 2
1808         register operands, encode destination in i.rm.regmem if its
1809         RegMem bit is set.
1810
1811 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
1812             Phil Edwards  <phil@codesourcery.com>
1813
1814         * doc/as.texinfo: Put the contents after the title page rather
1815         than at the end of the document.
1816
1817 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
1818
1819         * NEWS: Mention ".reloc".
1820
1821 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
1822
1823         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1824         in FLIX instructions.
1825
1826 2007-03-26  Julian Brown  <julian@codesourcery.com>
1827
1828         * config/tc-arm.c (arm_it): Add immisfloat field.
1829         (parse_qfloat_immediate): Disallow integer syntax for floating-point
1830         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1831         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1832         float.
1833         (neon_cmode_for_move_imm): Reject non-float immediates for float
1834         operands.
1835         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1836
1837 2007-03-26  Julian Brown  <julian@codesourcery.com>
1838
1839         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1840
1841 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
1842
1843         * doc/as.texinfo (Reloc): Document.
1844         * read.c (potable): Add "reloc".
1845         (s_reloc): New function.
1846         * write.c (reloc_list): New global var.
1847         (resolve_reloc_expr_symbols): New function.
1848         (write_object_file): Call it.
1849         (write_relocs): Process reloc_list.
1850         * write.h (struct reloc_list): New.
1851         (reloc_list): Declare.
1852
1853 2007-03-24  Paul Brook  <paul@codesourcery.com>
1854
1855         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1856
1857 2007-03-24  Paul Brook  <paul@codesourcery.com>
1858         Mark Shinwell  <shinwell@codesourcery.com>
1859
1860         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1861         (parse_operands): Don't expect comma if first operand missing.
1862         Handle OP_oRRw.
1863         (do_srs): Encode register number, checking it is r13.  Update comment.
1864         (insns): Update SRS entries to take a register.
1865
1866 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
1867
1868         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1869
1870 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
1871
1872         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1873         attempt to jump to the next instruction into NOPs.
1874
1875 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
1876
1877         * config/tc-spu.c: Don't include opcode/spu.h.
1878         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1879         (md_apply_fix): Adjust.
1880         * config/tc-spu.h: Include opcode/spu.h.
1881         (struct tc_fix_info): New.
1882         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1883         (TC_FORCE_RELOCATION): Define.
1884
1885 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
1886
1887         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1888
1889 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1890
1891         * config/tc-i386.c (process_suffix): Check 0x90 instead of
1892         xchg for xchg %rax,%rax.
1893
1894 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1895
1896         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1897         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1898
1899 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1900
1901         PR binutils/4218
1902         * config/tc-i386.c (match_template): Properly handle 64bit mode
1903         "xchg %eax, %eax".
1904
1905 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
1906
1907         PR gas/4124
1908         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1909
1910 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1911
1912         * Makefile.am: Run dep-am.
1913         * Makefile.in: Regenerated.
1914
1915         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1916
1917         * config/tc-i386.h: Include "opcodes/i386-opc.h".
1918         (NOP_OPCODE): Removed.
1919         (template): Likewise.
1920
1921 2007-03-21  Andreas Schwab  <schwab@suse.de>
1922
1923         * config/tc-i386.h (NOP_OPCODE): Restore.
1924
1925 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
1926
1927         * config/tc-arm.c (do_mul): Don't warn about overlapping
1928         Rd and Rm operands when assembling for v6 or above.
1929         Correctly capitalize register names in the messages.
1930         (do_mlas): Likewise.  Delete spurious blank line.
1931
1932 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
1933
1934         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1935
1936 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1937
1938         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1939         i386_regtab.
1940         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1941         on i386_regtab.
1942
1943 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
1944
1945         PR gas/4184
1946         * app.c (do_scrub_chars): PUT after setting states.
1947
1948 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1949
1950         * Makefile.am: Run "make dep-am".
1951         * Makefile.in: Regenerated.
1952
1953         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1954         "opcode/i386.h".
1955         (md_begin): Check reg_name != NULL for the last entry in
1956         i386_regtab.
1957
1958         * config/tc-i386.h: Move many entries to opcode/i386.h and
1959         opcodes/i386-opc.h.
1960
1961         * configure.in (need_opcodes): Set true for i386.
1962         * configure: Regenerated.
1963
1964 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1965
1966         * Makefile.am (REPORT_BUGS_TO): Removed.
1967         (INCLUDES): Remove -DREPORT_BUGS_TO.
1968         * Makefile.in: Regenerated.
1969
1970         * configure.in (--with-bugurl): Removed.
1971         * configure: Regenerated.
1972
1973         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1974         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1975         (TEXI2DVI): Likewise.
1976         (gasver.texi): Removed.
1977         (MOSTLYCLEANFILES): Remove gasver.texi.
1978         (as.1): Don't depend on gasver.texi.
1979         * doc/Makefile.in: Regenerated.
1980
1981         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1982
1983 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
1984
1985         * config/tc-arm.c (arm_copy_symbol_attributes): New.
1986         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1987         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1988         * gas/symbols.c (copy_symbol_attributes): Use
1989         TC_COPY_SYMBOL_ATTRIBUTES.
1990
1991 2007-03-14  Paul Brook  <paul@codesourcery.com>
1992
1993         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1994
1995 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
1996
1997         PR 4029
1998         * write.c (relax_segment): Insert extra alignment padding
1999         to break infinite relax loop when given impossible
2000         gcc_except_table assembly.
2001
2002 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
2003
2004         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
2005         on i.tm.base_opcode.
2006         (match_template): Likewise.
2007         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
2008
2009         * config/tc-i386.h (Opcode_D): New.
2010         (Opcode_FloatR): Likewise.
2011         (Opcode_FloatD): Likewise.
2012         (D): Redefined.
2013         (W): Likewise.
2014         (FloatMF): Likewise.
2015         (FloatR): Likewise.
2016         (FloatD): Likewise.
2017
2018 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
2019
2020         * app.c (do_scrub_chars): Recognize comments after # line "file".
2021         * read.c (get_linefile_number): New.
2022         (s_app_line): Accept ill-formed .linefile lines as comments.
2023
2024 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
2025
2026         * config/tc-i386.h (WORKING_DOT_WORD): Define.
2027
2028 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
2029
2030         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
2031         * as.h (new_logical_line_flags): New.
2032         * input-scrub.c (new_logical_line): Turned into wrapper for...
2033         (new_logical_line_flags): this.  Handle flags.
2034         * read.c (potable): Add linefile.  Adjust appline argument.
2035         (s_app_file): Fake .appfiles no more.
2036         (s_app_line): For .linefile, accept file name and flags.
2037
2038 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
2039
2040         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
2041
2042 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
2043
2044         * Makefile.am: Run "make dep-am".
2045         * Makefile.in: Regenerate.
2046         * po/POTFILES.in: Regenerate.
2047
2048 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
2049
2050         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
2051         bug-reporting URL.
2052         * doc/Makefile.am (gasver.texi): Define BUGURL.
2053         * doc/as.texinfo: Use BUGURL.
2054         * Makefile.in, configure, doc/Makefile.in: Regenerate.
2055
2056 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
2057
2058         * config/tc-s390.c (md_parse_option): z9-ec option added.
2059
2060 2007-03-02  Paul Brook  <paul@codesourcery.com>
2061
2062         * config/tc-arm.c (relax_immediate): Always return positive values.
2063         (relaxed_symbol_addr): New function.
2064         (relax_adr, relax_branch): Use it.
2065         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
2066
2067 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
2068
2069         * as.c (parse_args): Update copyright date.
2070
2071 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
2072
2073         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
2074
2075 2007-02-28  Nick Clifton  <nickc@redhat.com>
2076
2077         PR gas/3797
2078         * config/tc-d10v.c (do_assemble): Do not generate error messages,
2079         just return -1 whenever a problem is encountered.
2080         (md_assemble): If do_assemble returns -1 generate a non-fatal
2081         error message and return.
2082
2083         PR gas/2623
2084         * config/tc-msp430.c (line_separator_char): Change to '{'.
2085
2086 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
2087
2088         * config/tc-m68hc11.c (fixup24): Correct fixup size.
2089         (build_jump_insn): Likewise.
2090         (build_insn): Likewise.
2091         (s_m68hc11_relax): Likewise.
2092
2093 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
2094
2095         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
2096
2097 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
2098
2099         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
2100
2101 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
2102
2103         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
2104         (md_assemble): Likewise.
2105
2106 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
2107
2108         * write.c (size_seg): Always clear SEC_RELOC here.
2109         (install_reloc): New function, extracted from..
2110         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
2111         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
2112         testing frag size.  Set SEC_RELOC here.
2113
2114 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
2115
2116         PR 4082
2117         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
2118
2119 2007-02-20  Thiemo Seufer  <ths@mips.com>
2120
2121         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
2122
2123 2007-02-20  Thiemo Seufer  <ths@mips.com>
2124
2125         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
2126
2127 2007-02-20  Thiemo Seufer  <ths@mips.com>
2128             Chao-Ying Fu  <fu@mips.com>
2129
2130         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
2131         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
2132         (macro_build): Add case '2'.
2133         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
2134         (validate_mips_insn): Add support for balign instruction.
2135         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
2136         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
2137         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
2138         command line options.
2139         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
2140         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
2141         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
2142         .set dspr2, .set nodspr2.
2143
2144 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
2145
2146         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
2147         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
2148
2149 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
2150
2151         * write.c (TC_FX_SIZE_SLACK): Define.
2152         (write_relocs): Reinstate check for fixup within frag.
2153         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
2154         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
2155         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
2156         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
2157         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
2158
2159 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
2160             Nathan Sidwell  <nathan@codesourcery.com>
2161             Vladimir Prus  <vladimir@codesourcery.com
2162             Joseph Myers  <joseph@codesourcery.com>
2163
2164         * configure.in (--with-bugurl): New option.
2165         * configure: Regenerate.
2166         * dep-in.sed: Remove bin-bugs.h.
2167         * Makefile.am (REPORT_BUGS_TO): Define.
2168         (INCLUDES): Define REPORT_BUGS_TO.
2169         (DEP_INCLUDES): Likewise.
2170         ($(OBJS)): No longer depend on bin-bugs.h.
2171         * Makefile.in: Regenerate.
2172         * doc/Makefile.in: Regenerate.
2173         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
2174         * as.h: Remove include of bin-bugs.h.
2175
2176 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
2177
2178         * write.c: White space fixes.
2179         (fixup_segment): Move symbol_mri_common_p adjustments..
2180         (write_relocs): ..and symbol_equated_reloc_p adjustments..
2181         (adjust_reloc_syms): ..to here.
2182
2183 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
2184
2185         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
2186         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
2187         (subseg_set_rest): Remove unnecessary cast.
2188         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
2189         Remove unnecessary forward declarations and casts.
2190         (set_symtab): Delete extern bfd_alloc.
2191         (fixup_segment): Move.
2192
2193 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
2194
2195         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
2196         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
2197         (mcf5475_ctrl, mcf5485_ctrl): New.
2198         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
2199         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
2200         (init_table): Add asid, mmubar, adjust rombar0.
2201
2202 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
2203
2204         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
2205         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
2206         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
2207         code, and test for these insns using a combination of
2208         opcode_modifier and operand_types.
2209
2210 2007-02-07  Paul Brook  <paul@codesourcery.com>
2211
2212         * configure.tgt: Add arm*-*-uclinux-*eabi.
2213
2214 2007-02-05  Dave Brolley  <brolley@redhat.com>
2215             Richard Sandiford  <rsandifo@redhat.com>
2216             DJ Delorie  <dj@redhat.com>
2217             Stan Cox  <scox@redhat.com>
2218             Jim Blandy  <jimb@redhat.com>
2219             Nick Clifton  <nickc@redhat.com>
2220             Jim Wilson  <wilson@redhat.com>
2221             Frank Ch. Eigler  <fche@redhat.com>
2222             Graydon Hoare  <graydon@redhat.com>
2223             Ben Elliston  <bje@redhat.com>
2224             John Healy  <jhealy@redhat.com>
2225             Richard Henderson  <rth@redhat.com>
2226
2227         * Makefile.am (CPU_TYPES): Add mep.
2228         (TARGET_CPU_CFILES): Add tc-mep.c.
2229         (TARGET_CPU_HFILES): Add tc-mep.h.
2230         (DEPTC_mep_elf): New variable.
2231         (DEPTC_mep_coff): Likewise.
2232         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
2233         * configure.in: Support mep.
2234         * configure.tgt: Likewise.
2235         * config/tc-mep.c: New file.
2236         * config/obj-elf.c: New file.
2237         * config/tc-mep.c: New file.
2238         * config/tc-mep.h: New file.
2239         * testsuite/gas/mep: New testsuite with content.
2240         * Makefile.in: Regenerate.
2241         * configure: Regenerate.
2242
2243 2007-02-05  Dave Brolley  <brolley@redhat.com>
2244
2245         * cgen.c (gas_cgen_install_complex_reloc): Removed.
2246         (complex_reloc_installation_howto): Removed.
2247
2248 2007-02-05  Dave Brolley  <brolley@redhat.com>
2249             Graydon Hoare  <graydon@redhat.com>
2250             DJ Delorie  <dj@redhat.com>
2251             Catherine Moore  <clm@redhat.com>
2252             Michael Chastain  <chastain@redhat.com>
2253             Frank Ch. Eigler  <fche@redhat.com>
2254
2255         * symbols.c (use_complex_relocs_for): New, to decide
2256         when to use complex relocs. Add signed RELC support.
2257         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
2258         encode expression symbols as mangled complex relocation symbols (when
2259         compiled with -DOBJ_COMPLEX_RELOC).
2260         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
2261         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
2262         encode_addend with new args. Modify to get start, length from
2263         ifield whenever it is set. Also change condition on which
2264         self-describing relocs are encoded. Add hook into
2265         gas_cgen_encode_addend.
2266         (queue_fixup_recursively): Add signed RELC support. Change from masked
2267         expr to trunc flag. Restore assignment of sub-field value to
2268         temporary in fixups array. Reflect changed meaning of last arg to
2269         queue_fixup_recursively.
2270         (fixup): Add cgen_maybe_multi_ifield member.
2271         (make_right_shifted_expr): New function.
2272         (queue_fixup): Change to recursive function that fragments
2273         fixups if operand has a multi-ifield.
2274         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
2275         symbols, call weak_operand_overflow_check, and fragment call
2276         queue_fixup with operand fields.
2277         (gas_cgen_finish_insn) Modify to manage ifield pointer.
2278         (weak_operand_overflow_check): New function to try to select
2279         insns correctly.
2280         (gas_cgen_encode_addend): New function for relc.
2281         (gas_cgen_install_complex_reloc): Likewise.
2282         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
2283         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
2284         cgen_maybe_multi_ifield field to fx_cgen substructure.
2285         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
2286         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
2287
2288 2007-02-03  DJ Delorie  <dj@delorie.com>
2289
2290         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
2291         byte relocs.
2292         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
2293         (m32c_cons_fix_new): Prototype.
2294
2295 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
2296
2297         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
2298         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
2299
2300 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
2301
2302         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
2303         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
2304         (map_suffix_reloc_to_operator): New.
2305         (map_operator_to_reloc): New.
2306         (expression_maybe_register): Fix incorrect test of return value from
2307         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
2308         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
2309
2310 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
2311
2312         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
2313         (tinsn_get_tok): Delete prototype.
2314         * config/tc-xtensa.c (tinsn_get_tok): Delete.
2315
2316 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
2317
2318         * config/xtensa-relax.h (struct build_instr): Delete id field.
2319         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
2320         and LABEL tokens.
2321         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
2322         set op_data fields to zero.
2323         (parse_id_constant): Delete.
2324         (build_transition): Remove code to handle numbered literals and labels.
2325
2326 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
2327
2328         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
2329         (build_transition_table): Likewise.
2330
2331 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
2332
2333         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
2334         fx_tcbit.
2335         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
2336
2337 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
2338
2339         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
2340         (struct fix <fx_plt>): Rename to tcbit2.
2341         * write.c (fix_new_internal): Adjust.
2342         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2343         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2344         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2345         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2346         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2347         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2348         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2349         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2350         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
2351         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
2352         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2353         Instead, compare fx_r_type.
2354         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
2355         fx_tcbit in place of fx_plt.
2356         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
2357         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
2358         to fx_plt.
2359
2360 2007-01-30  Nick Clifton  <nickc@redhat.com>
2361
2362         * as.c (main): Mark symbols created via the --defsym command line
2363         option as volatile so that they can be overridden later on by a
2364         .set directive.  This maintains compatibility with the behaviour
2365         of earlier versions of the assembler.
2366         * doc/as.texinfo (--defsym): Document that the defined symbol's
2367         value can be overridden via a .set directive.
2368
2369 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
2370
2371         * config/tc-i386.c (swap_imm_operands): Renamed to ...
2372         (swap_2_operands): This.  Take 2 ints.
2373         (md_assemble): Updated.
2374         (swap_operands): Call swap_2_operands to swap 2 operands.
2375
2376 2007-01-24  DJ Delorie  <dj@redhat.com>
2377
2378         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
2379
2380 2007-01-22  Nick Clifton  <nickc@redhat.com>
2381
2382         PR gas/3871
2383         * tc-score.c: Remove unnecessary uses of _().
2384         Make the err_msg[] a file level local array in order to save
2385         storage space.
2386         Remove unnecessary sprintf()s.
2387
2388 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
2389
2390         PR gas/3871
2391         * config/tc-score.c : Using _() for const string.
2392         Do not assign inst.error with a local string pointer.
2393         (md_section_align): Pad section.
2394
2395 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
2396
2397         * config/tc-i386.c (build_modrm_byte): Check number of operands
2398         when procssing memory/register operand.
2399
2400 2007-01-12  Nick Clifton  <nickc@redhat.com>
2401
2402         PR gas/3856
2403         * macro.c (expand_irp): Do not ignore spaces inside quoted
2404         strings.
2405
2406 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2407
2408         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2409         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2410         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2411         (TC_FORCE_RELOCATION): Define.
2412         (TC_FORCE_RELOCATION_LOCAL): Define.
2413         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2414
2415 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2416
2417         * input-file.c (input_file_open): Check fgets return.
2418
2419 2007-01-11  Paul Brook  <paul@codesourcery.com>
2420
2421         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2422
2423 2007-01-11  Nick Clifton  <nickc@redhat.com>
2424
2425         PR gas/3707
2426         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2427         variable.
2428
2429         * config/tc-mcore.c (md_number_to_chars): Use
2430         number_to_chars_{big|little}endian.
2431
2432 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
2433
2434         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2435         architecture by itself.
2436         (m68k_ip): Don't issue a warning for tbl instructions on fido.
2437         (m68k_elf_final_processing): Treat Fido as an architecture by
2438         itself.
2439
2440 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
2441
2442         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2443
2444 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
2445
2446         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2447         depending on allow_naked_reg.
2448
2449 2007-01-04  Paul Brook  <paul@codesourcery.com>
2450
2451         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2452
2453 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
2454
2455         PR gas/3830
2456         * config/tc-i386.c (register_prefix): New.
2457         (set_intel_syntax): Set set_intel_syntax to "" if register
2458         prefix isn't needed.
2459         (check_byte_reg): Use register_prefix for error message.
2460         (check_long_reg): Likewise.
2461         (check_qword_reg): Likewise.
2462         (check_word_reg): Likewise.
2463
2464 2007-01-04  Julian Brown  <julian@codesourcery.com>
2465
2466         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2467         (do_neon_qshl_imm): Likewise.
2468         (do_neon_rshl): New function. Handle rounding variants of
2469         v{q}shl-by-register.
2470         (insns): Use do_neon_rshl for vrshl, vqrshl.
2471
2472 2007-01-04  Paul Brook  <paul@codesourcery.com>
2473
2474         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2475         and vacle.
2476
2477 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2478
2479         * config/tc-i386.c (swap_operands): Remove branches.
2480
2481 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2482
2483         * config/tc-i386.c: Update copyright year.
2484         * config/tc-i386.h: Likewise.
2485
2486 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2487
2488         * config/tc-i386.c (smallest_imm_type): Return unsigned int
2489         instead of int.
2490
2491 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2492
2493         * config/tc-i386.c: Convert to ISO C90 formatting
2494         * config/tc-i386.h: Likewise.
2495
2496 2007-01-03  David Daney  <ddaney@avtrex.com>
2497
2498         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
2499         documentation.
2500
2501 For older changes see ChangeLog-2006
2502 \f
2503 Local Variables:
2504 mode: change-log
2505 left-margin: 8
2506 fill-column: 74
2507 version-control: never
2508 End: