1 2014-09-03 Jiong Wang <jiong.wang@arm.com>
3 * config/tc-aarch64.c (parse_operands): Recognize PAIRREG.
4 (aarch64_features): Add entry for lse extension.
6 2014-08-26 Jiong Wang <jiong.wang@arm.com>
8 * config/tc-arm.c (aeabi_set_public_attributes): Update selected_cpu
9 based on the info we got during parsing.
10 (arm_handle_align): Make sure the p2align expanding logic under thumb
13 2014-08-26 Maciej W. Rozycki <macro@codesourcery.com>
15 * config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
17 <M_SAAD_AB>: ... here. Assert that !microMIPS.
19 2014-08-26 Jan-Benedict Glaw <jbglaw@lug-owl.de>
21 * config/tc-moxie.h (md_convert_frag): Silence warning.
23 2014-08-22 Richard Henderson <rth@redhat.com>
25 * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
26 register number for vector register types.
27 * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
28 (DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
30 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
32 * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
33 flag if both the processor and opcode flags match.
35 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
37 * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
39 2014-08-20 Maciej W. Rozycki <macro@codesourcery.com>
41 * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
42 (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
43 (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
45 2014-08-20 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
47 * config/tc-arm.c (parse_ifimm_zero): New function.
48 (enum operand_parse_code): Add OP_RSVD_FI0 value.
49 (parse_operands): Handle OP_RSVD_FI0.
50 (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
52 2014-08-20 Alan Modra <amodra@gmail.com>
54 * Makefile.am: Typo fix.
55 * Makefile.in: Regenerate.
56 * po/POTFILES.in: Regenerate.
58 2014-08-19 Andreas Tobler <andreast@fgznet.ch>
60 * Makefile.am: Add FreeBSD ARM support.
61 * Mafefile.in: Regenerate.
62 * configure.tgt: Add FreeBSD ARM support.
63 * config/te-armfbsdeabi.h: New file.
64 * config/te-armfbsdvfp.h: Likewise.
66 2014-08-19 Alan Modra <amodra@gmail.com>
68 * configure: Regenerate.
70 2014-08-18 Nick Clifton <nickc@redhat.com>
72 * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
73 RELOC_RL78_DIFF fixups.
75 2014-08-18 Alan Modra <amodra@gmail.com>
77 * read.c (parse_mri_cons): Warning fix.
79 2014-08-14 Alan Modra <amodra@gmail.com>
81 * configure.ac: Move ACX_LARGEFILE after LT_INIT.
82 * config.in: Regenerate.
83 * configure: Regenerate.
85 2014-08-06 Ilya Tocar <ilya.tocar@intel.com>
87 * config/tc-i386.c (omit_lock_prefix): New.
88 (output_insn): Omit lock prefix if omit_lock_prefix is true.
89 (OPTION_omit_lock_prefix): New.
90 (md_longopts): Add momit-lock-prefix.
91 (md_parse_option): Handle momit-lock-prefix.
92 (md_show_usage): Add momit-lock-prefix=[no|yes].
93 * doc/c-i386.texi (momit-lock-prefix): Document.
95 2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com>
98 * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
101 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
103 * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
104 and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
106 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
108 * config/tc-mips.c (mips_flags_frag): New static global.
109 (struct mips_set_options): Add oddspreg field.
110 (file_mips_opts, mips_opts): Initialize oddspreg.
111 (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
113 (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
114 and -mno-odd-spreg options.
115 (md_begin): Create .MIPS.abiflags section.
116 (fpabi_incompatible_with, fpabi_requires): New static function.
117 (check_fpabi): Likewise.
118 (mips_check_options): Handle fp=xx and oddspreg restrictions.
119 (file_mips_check_options): Set oddspreg by default for fp=xx.
120 (mips_oddfpreg_ok): Re-write function.
121 (check_regno): Check odd numbered registers regardless of FPR size.
122 For fp != 32 use as_bad instead of as_warn.
123 (match_float_constant): Rewrite check regarding FP register width. Add
124 support for generating constants when MXHC1 is present. Handle fp=xx
125 to comply with the ABI.
126 (macro): Update M_LI_DD similarly to match_float_constant. Generate
127 MTHC1 when available. Check that correct code can be generated for
128 fp=xx and fp=64 ABIs.
129 (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
131 (mips_convert_ase_flags): New static function.
132 (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
133 to determine when to add the EF_MIPS_FP64 flag. Populate the
134 .MIPS.abiflags section.
135 (md_mips_end): Update .gnu_attribute based on command line and .module
136 as applicable. Use check_fpabi to ensure .gnu.attribute and command
137 line/.module options are consistent.
138 * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
139 -mfpxx, -modd-spreg and -mno-odd-spreg options.
140 * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
141 gnu_attribute values and FP ABIs.
143 2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com>
145 Add RTEMS target support and simplify matching
147 * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
148 (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
150 2014-07-27 Anthony Green <green@moxielogic.com>
152 * configure.tgt (generic_target): Add moxie-*-moxiebox*
153 * config/tc-moxie.c: Remove moxie_target_format.
154 (md_begin): Set default target_big_endian.
155 * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
156 (TARGET_FORMAT): Set based on target_big_endian.
158 2014-07-26 Alan Modra <amodra@gmail.com>
160 * config/bfin-parse.y: Don't include obstack.h.
161 * config/obj-aout.c: Likewise.
162 * config/obj-coff.c: Likewise.
163 * config/obj-som.c: Likewise.
164 * config/tc-bfin.c: Likewise.
165 * config/tc-i960.c: Likewise.
166 * config/tc-rl78.c: Likewise.
167 * config/tc-rx.c: Likewise.
168 * config/tc-tic4x.c: Likewise.
170 * listing.c: Likewise.
171 * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
172 * config/tc-aarch64.c (symbol_locate): Likewise.
173 * config/tc-arm.c (symbol_locate): Likewise.
174 * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
175 * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
176 (s3_build_dependency_insn_hsh): Likewise.
177 * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
178 (s7_build_dependency_insn_hsh): Likewise.
179 * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
180 (frag_new): Make parameter a size_t.
181 (frag_var_init): Make max_chars and var parameters size_t.
182 (frag_var, frag_variant): Likewise.
183 (frag_room): Return a size_t.
184 (frag_align_pattern): Make n_fill parameter a size_t.
185 * frags.h: Update function prototypes.
186 * symbols.c (save_symbol_name): Make name_length a size_t.
188 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
189 Alexander Ivchenko <alexander.ivchenko@intel.com>
190 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
191 Sergey Lega <sergey.s.lega@intel.com>
192 Anna Tikhonova <anna.tikhonova@intel.com>
193 Ilya Tocar <ilya.tocar@intel.com>
194 Andrey Turetskiy <andrey.turetskiy@intel.com>
195 Ilya Verbin <ilya.verbin@intel.com>
196 Kirill Yukhin <kirill.yukhin@intel.com>
197 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
199 * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
200 * doc/c-i386.texi: Document avx512dq/.avx512dq.
202 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
203 Alexander Ivchenko <alexander.ivchenko@intel.com>
204 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
205 Sergey Lega <sergey.s.lega@intel.com>
206 Anna Tikhonova <anna.tikhonova@intel.com>
207 Ilya Tocar <ilya.tocar@intel.com>
208 Andrey Turetskiy <andrey.turetskiy@intel.com>
209 Ilya Verbin <ilya.verbin@intel.com>
210 Kirill Yukhin <kirill.yukhin@intel.com>
211 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
213 * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
214 * doc/c-i386.texi: Document avx512bw/.avx512bw.
216 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
217 Alexander Ivchenko <alexander.ivchenko@intel.com>
218 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
219 Sergey Lega <sergey.s.lega@intel.com>
220 Anna Tikhonova <anna.tikhonova@intel.com>
221 Ilya Tocar <ilya.tocar@intel.com>
222 Andrey Turetskiy <andrey.turetskiy@intel.com>
223 Ilya Verbin <ilya.verbin@intel.com>
224 Kirill Yukhin <kirill.yukhin@intel.com>
225 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
227 * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
228 (build_vex_prefix): Don't abort on VEX.W.
229 (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
230 (check_VecOperations): Ditto.
231 * doc/c-i386.texi: Document avx512vl/.avx512vl.
233 2014-07-21 Joel Sherrill <joel.sherrill@oarcorp.com>
235 Add or reactivate or1k-*-rtems*
236 * gas/configure.tgt (or1k-*-rtems*): Add.
238 2014-07-17 Ilya Tocar <ilya.tocar@intel.com>
240 * config/tc-i386.c (parse_register): Set need_vrex.
242 2014-07-15 Jiong Wang <jiong.wang@arm.com>
244 * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
245 sign extension. Casting the type of imm1 and imm2 to offsetT. Fix
246 one logic error when checking X_op.
248 2014-07-14 Andreas Schwab <schwab@linux-m68k.org>
250 * config/tc-m68k.c (md_convert_frag_1): Don't complain with
251 --pcrel about TAB (DBCCLBR, LONG) conversion.
253 2014-07-12 David Majnemer <david.majnemer@gmail.com>
255 * read.c (assign_symbol): Don't force "set" symbols local for PE.
257 2014-07-08 Jiong Wang <jiong.wang@arm.com>
259 * config/tc-arm.c (literal_pool): New field "alignment".
260 (find_or_make_literal_pool): Initialize "alignment" to 2.
261 (s_ltorg): Align the pool using value of "alignment"
262 (parse_big_immediate): New parameter "in_exp". Return
263 parsed expression if "in_exp" is not null.
264 (parse_address_main): Invoke "parse_big_immediate" for
266 (add_to_lit_pool): Add one parameter 'nbytes'.
267 Split 8 byte entry into two 4 byte entry.
268 Add padding to align 8 byte entry to 8 byte boundary.
269 (encode_arm_cp_address): Generate literal pool entry if possible.
270 (move_or_literal_pool): Generate entry for vldr case.
271 (enum lit_type): New enum type.
272 (do_ldst): Use new enum type.
273 (do_ldstv4): Likewise.
274 (do_t_ldst): Likewise.
275 (neon_write_immbits): Support Thumb-2 mode.
277 2014-07-07 Barney Stratford <barney_stratford@fastmail.fm>
279 * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
280 name as [xyz][hl]. Permit using a symbol whoes name begins with
281 ‘r’ to refer to a register.
282 Allow arbitrary expressions for the P and p operators.
283 (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
284 BFD_RELOC_AVR_PORT6 relocations.
286 2014-07-04 Alan Modra <amodra@gmail.com>
288 * doc/internals.texi: Update "configure.in" comments.
289 * acinclude.m4: Likewise.
290 * config/tc-sparc.c: Likewise.
292 2014-07-04 Alan Modra <amodra@gmail.com>
294 * configure.ac: Rename from configure.in.
295 * Makefile.in: Regenerate.
296 * config.in: Regenerate.
297 * doc/Makefile.in: Regenerate.
299 2014-07-04 Alan Modra <amodra@gmail.com>
301 * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
302 * doc/Makefile.in: Regenerate.
304 2014-07-04 Alan Modra <amodra@gmail.com>
306 * configure.in: Include bfd/version.m4.
307 (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
308 (BFD_VERSION): Delete.
309 * configure.com: Get bfd version from bfd/version.m4.
310 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
311 * configure: Regenerate.
312 * Makefile.in: Regenerate.
313 * doc/Makefile.in: Regenerate.
315 2014-07-01 Barney Stratford <barney_stratford@fastmail.fm>
316 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
317 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
318 Soundararajan <Sounderarajan.D@atmel.com>
320 * config/tc-avr.c (mcu_types): Add avrtiny arch.
321 Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
323 (md_show_usage): Add avrtiny arch in usage message.
324 (avr_operand): validate and issue error for invalid register for
326 add new reloc exp for 16 bit lds/sts instruction.
327 (md_apply_fix): check 16 bit lds/sts operand for out of range and
329 (md_assemble): check ISA for arch and issue diagnostic.
330 * NEWS: Mention new support.
331 * doc/c-avr.texi: Document support for avrtiny architecture.
333 2014-06-27 Alan Modra <amodra@gmail.com>
335 * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
336 SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
337 (obj_mach_o_frob_label): Avoid cascading errors.
338 (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
340 2014-06-18 DJ Delorie <dj@redhat.com>
342 * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
345 2014-06-17 Hans-Peter Nilsson <hp@bitrange.com>
347 * config/tc-mmix.c (loc_assert_s): New member frag.
349 (mmix_md_end): If an error is reported for a LOC expression, patch
352 2014-06-17 Chris Metcalf <cmetcalf@tilera.com>
355 * macro.c (buffer_and_nest): Honour #line directives inside
358 2014-06-17 Jiong Wang <jiong.wang@arm.com>
360 * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
362 2014-06-17 Hans-Peter Nilsson <hp@axis.com>
364 * config/tc-cris.c (cris_bad): New function.
365 (cris_process_instruction): Where applicable, use it instead of
368 2014-06-16 Nick Clifton <nickc@redhat.com>
370 * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
372 2014-06-16 Jiong Wang <jiong.wang@arm.com>
374 * config/tc-aarch64.c (END_OF_INSN): New macro.
375 (parse_operands): Handle operand given and in wrong format when
378 2014-06-16 Alan Modra <amodra@gmail.com>
380 * write.h (subsegs_finish): Delete declaration.
381 * write.c (subsegs_finish): Make static.
382 (write_object_file): Call subsegs_finish from here. Don't print
383 warning and error count here..
384 * as.c (main): ..do so here instead. Remove dead code for "no
385 object file generated". Split out count strings to better support
386 internationalisation. Don't call subsegs_finish. Tidy setting of
387 "keep_it". Run write_object_file even after errors.
388 (keep_it): Make static.
389 * config/obj-elf.c (elf_frob_symbol): Remove assert.
390 (elf_frob_file_before_adjust): Likewise.
392 2014-06-16 Alan Modra <amodra@gmail.com>
394 * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
397 2014-06-16 Alan Modra <amodra@gmail.com>
399 * config/tc-i386.c (reloc): Don't avoid pcrel check for
400 BFD_RELOC_SIZE64. Return NO_RELOC on failing pcrel check.
402 2014-06-16 Alan Modra <amodra@gmail.com>
404 * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
405 (tic6x_output_exidx_entry): Likewise.
406 (md_apply_fix): Simplify 1 byte md_number_to_chars.
408 2014-06-16 Alan Modra <amodra@gmail.com>
410 * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
411 end of archive to temp file.
412 (tic54x_start_line_hook): Start scan for parallel on next line,
413 not one char into next line (which may overrun the buffer).
415 2014-06-16 Alan Modra <amodra@gmail.com>
417 * config/tc-vax.c (md_apply_fix): Rewrite.
418 (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
419 define rather than the equivalent BFD_RELOC_NONE.
421 2014-06-16 Alan Modra <amodra@gmail.com>
423 * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
424 (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
425 and BFD_RELOC_ARM_TLS* relocs. Simplify BFD_RELOC_8 case.
427 2014-06-16 Alan Modra <amodra@gmail.com>
429 * config/tc-cris.c (md_create_long_jump): Follow "short" jump
430 with a nop rather than leaving uninitialised.
432 2014-06-13 Chen Gang <gang.chen.5i5j@gmail.com>
434 * config/tc-score7.c: Replace sprintf with strcpy where
436 (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
438 * config/tc-score.c (s3_relax_branch_inst16): Likewise.
439 (s3_relax_cmpbranch_inst32): Likewise.
441 2014-06-07 Alan Modra <amodra@gmail.com>
443 * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
444 on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
447 2014-06-02 Martin Storsjo <martin@martin.st>
449 * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
451 2014-06-05 Joel Brobecker <brobecker@adacore.com>
453 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
454 bfd's development.sh.
455 * Makefile.in, configure: Regenerate.
457 2014-06-03 Nick Clifton <nickc@redhat.com>
459 * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
460 (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
461 * doc/c-msp430.texi: Update command line option description.
463 2014-05-22 Alan Modra <amodra@gmail.com>
465 * listing.c (listing_warning, listing_error): Add space after colon.
466 * messages.c (as_warn_internal, as_bad_internal): Use the same
469 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
471 * config/tc-mips.c (file_mips_opts_checked): New static global.
472 (s_module): New static function.
474 (mips_pseudo_table): Add .module handler.
475 (mips_set_ase): Add opts argument and use instead of mips_opts.
476 (md_assemble): Use file_mips_check_options.
477 (md_parse_option): Update to use file_mips_opts instead of mips_opts.
478 (mips_set_architecture): Delete function. Moved to...
479 (mips_after_parse_args): Here. All logic now applies to
480 file_mips_opts first and then copies the final state to mips_opts.
481 Move error checking and defaults inference to mips_check_options and
482 file_mips_check_options.
483 (mips_check_options): New static function. Common option checking for
484 command line, .module and .set. Use .module values in error messages
485 instead of refering to command line options.
486 (file_mips_check_options): New static function. A wrapper for
487 mips_check_options with file_mips_opts. Updates BFD arch based on
489 (s_mipsset): Split into s_mipsset and parse_code_option. Settings
490 supported by both .set and .module are moved to parse_code_option.
491 Warnings and errors are kept in s_mipsset because when
492 parse_code_option is used with s_module the warnings are deferred
493 until code is generated. Any setting supporting 'default' value is
494 kept in s_mipsset as it is not applicable to s_module. Inferred
495 settings are also kept in s_mipsset as s_module does not infer any
496 settings. Use mips_check_options.
497 (parse_code_option): New static function derived from s_mipsset.
498 (s_module): New static function that implements .module. Allows file
499 level settings to be changed until code is generated.
500 (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
501 (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
502 (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
503 (md_mips_end): Use file_mips_check_options.
504 * doc/c-mips.texi: Document .module.
506 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
508 * messages.c (as_warn_internal): Remove extra whitespace from
511 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
513 * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
514 (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
516 2014-05-20 Mike Stump <mikestump@comcast.net>
518 * messages.c (as_warn_internal): Ensure we don't interleave output
519 within a single line when make -j is used.
520 (as_bad_internal): Likewise.
522 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
524 * config/obj-elf.h (obj_elf_seen_attribute): Declare.
525 * config/obj-elf.c (recorded_attribute_info): New structure.
526 (recorded_attributes): New variable.
527 (record_attribute, obj_elf_seen_attribute): New functions.
528 (obj_elf_vendor_attribute): Record which attributes have been seen.
530 2014-05-20 Nick Clifton <nickc@redhat.com>
532 * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
533 Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
534 (msp430_srcoperand): Store vshift value in operand.
536 2014-05-19 Nick Clifton <nickc@redhat.com>
539 * config/tc-i386.c (md_apply_fix): Improve the detection of code
540 symbols for 32-bit PE targets.
542 2014-05-18 Richard Sandiford <rdsandiford@googlemail.com>
544 * config/tc-mips.c (md_obj_begin): Delete.
545 (md_obj_end): Fold into...
546 (md_mips_end): ...here. Move to end of file.
548 2014-05-17 Nick Clifton <nickc@redhat.com>
551 * config/tc-v850.c (handle_ctoff): Generate an error if called
552 when using the RH850 ABI.
554 2014-05-16 Kaushik Phata <Kaushik.Phatak@kpit.com>
556 * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
557 and OPTION_64BIT_DOUBLES.
558 (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
559 (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
560 (md_show_usage): Show all of the RL78 options.
561 (rl78_float_cons): New static functions.
562 (md_pseudo_table): Update handler for "double".
563 * doc/c-rl78.texi: Document new options.
564 * doc/as.texinfo: Likewise.
566 2014-05-13 Matthew Fortune <matthew.fortune@imgtec.com>
568 * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
569 (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
570 (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
571 (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
573 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
575 * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
578 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
580 * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
581 Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
582 (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
583 file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
585 (file_mips_opts): Here. New static global. Update throughout.
586 (mips_opts): Update defaults for gp32 and fp.
588 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
590 * config/tc-mips.c (streq): Define.
591 (mips_convert_symbolic_attribute): New function.
592 * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
593 (mips_convert_symbolic_attribute): New prototype.
595 2014-05-02 Max Filippov <jcmvbkbc@gmail.com>
597 * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
600 2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com>
602 * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
604 (ISA_HAS_64BIT_FPRS): Likewise.
605 (ISA_HAS_ROR): Likewise.
606 (ISA_HAS_ODD_SINGLE_FPR): Likewise.
607 (ISA_HAS_MXHC1): Likewise.
608 (hilo_interlocks): Likewise.
609 (md_longopts): Likewise.
610 (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
611 (ISA_HAS_DROR): Likewise.
612 (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
614 (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
616 (md_parse_option): Likewise.
617 (s_mipsset): Likewise.
618 (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
619 and mips64r5. Also change p5600 entry to be mips32r5.
620 * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
622 * configure: Regenerate.
623 * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
624 -mips64r5 command line options.
625 * doc/as.texinfo: Likewise.
627 2014-04-28 Nick Clifton <nickc@redhat.com>
630 * config/tc-i386.c (md_apply_fix): Do not adjust value of
631 pc-relative fixes against weak symbols.
633 2014-04-26 Alan Modra <amodra@gmail.com>
635 * po/POTFILES.in: Regenerate.
637 2014-04-24 Nick Clifton <nickc@redhat.com>
639 * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
642 2014-04-23 Will Newton <will.newton@linaro.org>
644 * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
645 directly instead of mapping_state.
647 2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com>
649 * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
650 (md_longopts): Add xpa and no-xpa command line options.
651 (mips_ases): Add MIPS XPA ASE.
652 (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
653 * doc/as.texinfo: Document the MIPS XPA command line options.
654 * doc/c-mips.texi: Document the MIPS XPA command line options,
655 and assembler directives.
657 2014-04-22 Sandra Loosemore <sandra@codesourcery.com>
659 * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
660 unbreak self-test mode.
662 2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
664 * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
667 2014-04-22 Christian Svensson <blue@cmd.nu>
669 * Makefile.am: Remove openrisc and or32 support. Add support for or1k.
670 * configure.in: Likewise.
671 * configure.tgt: Likewise.
672 * doc/as.texinfo: Likewise.
673 * config/obj-coff.h: Likewise.
674 * config/tc-or1k.c: New file.
675 * config/tc-or1k.h: New file.
676 * config/tc-openrisc.c: Delete.
677 * config/tc-openrisc.h: Delete.
678 * config/tc-or32.c: Delete.
679 * config/tc-or32.h: Delete.
680 * Makefile.in: Regenerate.
681 * configure: Regenerate.
683 2014-04-16 Alan Modra <amodra@gmail.com>
685 * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
686 * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
688 2014-04-10 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
690 * config/tc-avr.c: Add new flag mlink-relax.
691 (md_show_usage): Add flag and help text.
692 (md_parse_option): Record whether link relax is turned on.
693 (relaxable_section): New.
694 (avr_validate_fix_sub): New.
695 (avr_force_relocation): New.
696 (md_apply_fix): Generate DIFF reloc.
697 (avr_allow_local_subtract): New.
699 * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
700 (TC_FORCE_RELOCATION): Define.
701 (TC_FORCE_RELOCATION_SUB_SAME): Define.
702 (TC_VALIDATE_FIX_SUB): Define.
703 (avr_force_relocation): Declare.
704 (avr_validate_fix_sub): Declare.
705 (md_allow_local_subtract): Define.
706 (avr_allow_local_subtract): Declare.
708 2014-04-10 Andrew Bennett <andrew.bennett@imgtec.com>
710 * config/tc-mips.c (mips_cpu_info_table): Add P5600
712 * doc/c-mips.texi: Document p5600.
714 2014-04-09 Nick Clifton <nickc@redhat.com>
716 * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
717 * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
718 * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
719 * read.c (emit_expr_fix): Mark the r parameter as potentially
722 2014-04-09 Alan Modra <amodra@gmail.com>
724 * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
726 (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
727 (ppc_elf_cons_fix_check): New function.
728 (md_assemble): Set last_insn, last_seg, last_subseg.
729 (ppc_byte, md_apply_fix): Handle warn_476.
730 * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
731 (ppc_elf_cons_fix_check): Declare.
732 * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
734 2014-04-09 Alan Modra <amodra@gmail.com>
736 * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
737 * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
738 * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
739 (TC_CONS_FIX_NEW): Add RELOC parameter.
740 * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
741 * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
742 * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
743 * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
744 * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
745 * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
746 * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
747 * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
748 * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
750 * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
751 * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
752 * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
753 * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
754 * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
755 * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
756 * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
757 * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
758 * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
759 * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
761 * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
762 * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
764 * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
765 * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
766 * gas/config/tc-avr.c (exp_mod_data): Make global.
767 (pexp_mod_data): Delete.
768 (avr_parse_cons_expression): Return exp_mod_data pointer.
769 (avr_cons_fix_new): Add exp_mod_data_t pointer param.
770 (exp_mod_data_t): Move typedef..
771 * gas/config/tc-avr.h: ..to here.
772 (exp_mod_data): Declare.
773 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
774 (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
775 (TC_CONS_FIX_NEW): Update.
776 * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
777 (cons_fix_new_hppa): Add hppa_field_selector param.
778 (fix_new_hppa): Adjust.
779 (parse_cons_expression_hppa): Return field selector.
780 * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
781 (cons_fix_new_hppa): Likewise.
782 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
783 * gas/config/tc-i386.c (got_reloc): Delete static var.
784 (x86_cons_fix_new): Add reloc param.
785 (x86_cons): Return got reloc.
786 * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
787 (TC_CONS_FIX_NEW): Add RELOC param.
788 * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param. Adjust
790 * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
791 (TC_CONS_FIX_NEW): Add reloc param.
792 * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
794 (cons_fix_new_microblaze): Add reloc param.
795 * gas/config/tc-microblaze.h: Formatting.
796 (parse_cons_expression_microblaze): Update proto.
797 (cons_fix_new_microblaze): Likewise.
798 * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
799 (nios2_cons): Return ldo reloc.
800 (nios2_cons_fix_new): Delete.
801 * gas/config/tc-nios2.h (nios2_cons): Update prototype.
802 (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
803 * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
804 short. Make llong use cons.
805 (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
806 (ppc_elf_cons): Delete.
807 (ppc_elf_parse_cons): New function.
808 (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
809 (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
810 * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
811 (ppc_elf_parse_cons): Declare.
812 * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
813 (sparc_cons): Return reloc specifier.
814 (cons_fix_new_sparc): Add reloc specifier param.
815 (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
816 * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
817 (TC_PARSE_CONS_RETURN_NONE): Define.
818 (sparc_cons, cons_fix_new_sparc): Update prototype.
819 * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
820 (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
821 (md_assemble): Likewise.
822 (parse_cons_expression_v850): Return reloc.
823 (cons_fix_new_v850): Add reloc parameter.
824 * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
825 (cons_fix_new_v850): Likewise.
826 * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
827 (vax_cons): Return reloc.
828 (vax_cons_fix_new): Add reloc parameter.
829 * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
830 * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
831 * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
832 * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
833 (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
834 * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
835 (do_parse_cons_expression): Adjust.
836 (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
837 to emit_expr_with_reloc.
838 (emit_expr_with_reloc): New function handling reloc, mostly
841 (emit_expr_fix): Add reloc param. Adjust TC_CONS_FIX_NEW invocation.
843 (parse_mri_cons): Convert to ISO.
844 * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
845 (TC_PARSE_CONS_RETURN_NONE): Define.
846 (emit_expr_with_reloc): Declare.
847 (emit_expr_fix): Update prototype.
848 * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
850 2014-04-03 Ilya Tocar <ilya.tocar@intel.com>
852 * config/tc-i386.c (cpu_arch): Add .se1.
853 * doc/c-i386.texi: Document .se1/se1.
855 2014-04-02 DJ Delorie <dj@redhat.com>
857 * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
858 pc-relative branches.
860 2014-04-02 Nick Clifton <nickc@redhat.com>
863 * config/tc-arm.c (create_unwind_entry): Report an error if an
864 attempt to recreate an unwind directive is encountered.
866 2014-03-27 Nick Clifton <nickc@redhat.com>
868 * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
869 sprintf in order to avoid a compile time warning.
871 2014-03-26 Nick Clifton <nickc@redhat.com>
873 * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
874 relocation is used on an 8-bit operand or vice versa.
875 (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
876 (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
878 2014-03-25 Nick Clifton <nickc@redhat.com>
880 * config/obj-coff-seh.c (obj_coff_seh_code): New function -
881 switches the current segment back to the code segment recorded
882 when seh_proc was last invoked.
883 * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
885 2014-03-25 Alan Modra <amodra@gmail.com>
887 * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
888 (md_assemble): Likewise. Warn.
890 2014-03-21 David Weatherford <weath@cadence.com>
891 Max Filippov <jcmvbkbc@gmail.com>
893 * config/tc-xtensa.c (xtensa_check_frag_count)
894 xtensa_create_trampoline_frag,
895 xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
896 find_trampoline_seg, search_trampolines, get_best_trampoline,
897 check_and_update_trampolines, add_jump_to_trampoline,
898 dump_trampolines): New functions.
899 (md_parse_option): Add cases for --[no-]trampolines options.
900 (md_assemble, finish_vinsn, xtensa_end): Add call to
901 xtensa_check_frag_count.
902 (xg_assemble_vliw_tokens): Add call to
903 xtensa_maybe_create_trampoline_frag.
904 (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
905 (relax_frag_immed): Relax jump instructions that cannot reach its
907 * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
909 * doc/as.texinfo: Document --[no-]trampolines command-line options.
910 * doc/c-xtensa.texi: Document trampolines relaxation and command
912 * frags.c (get_frag_count, clear_frag_count): New function.
913 (frag_alloc): Increment totalfrags counter.
914 * frags.h (get_frag_count, clear_frag_count): New function.
916 2014-03-20 DJ Delorie <dj@redhat.com>
918 * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
919 * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
921 * config/tc-rl78.h (md_relax_frag): Define.
922 (rl78_relax_frag): Declare.
923 * config/tc-rl78.c (rl78_relax): Add.
924 (md_assemble): Set up the variable frags also when relaxing.
926 (rl78_opcode_type): New.
927 (rl78_frag_fix_value): New.
928 (md_estimate_size_before_relax): New-ish.
929 (rl78_relax_frag): New.
930 (md_convert_frag): New-ish.
932 2014-03-20 Richard Sandiford <rdsandiford@googlemail.com>
934 * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
935 * config/tc-mips.c (md_pcrel_from): Remove error message.
936 (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
937 BFD_RELOC_32_PCREL. Report a specific error message for unhandled
938 PC-relative expressions. Handle BFD_RELOC_8.
940 2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com>
942 * config/tc-sparc.c (hpriv_reg_table): Added entries for
943 %hstick_offset and %hstick_enable.
944 * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
945 %hstick_enable hyperprivileged registers.
947 2014-03-19 Daniel Gutson <daniel.gutson@tallertechnologies.com>
948 Nick Clifton <nickc@redhat.com>
950 * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
951 CCS syntax compatibility mode is on or off.
952 (asmfunc_states): New enum to represent the asmfunc directive state.
953 (asmfunc_state): New variable holding the asmfunc directive state.
954 (comment_chars): Rename to arm_comment_chars.
955 (line_separator_chars): Rename to arm_line_separator_chars.
956 (s_ccs_ref): New function that handles the .ref directive.
957 (asmfunc_debug): New function.
958 (s_ccs_asmfunc): New function that handles the .asmfunc directive.
959 (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
960 (s_ccs_def): New function that handles the .def directive.
961 (tc_start_label_without_colon): New function.
962 (md_pseudo_table): Added new CCS directives.
963 (arm_ccs_mode): New function that handles the -mccs command line option.
964 (arm_long_opts): Added new -mccs command line option.
965 * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
966 (TC_START_LABEL_WITHOUT_COLON): New macro.
967 (tc_start_label_without_colon): Added extern function declaration.
968 (tc_comment_chars): Define.
969 (tc_line_separator_chars): Define.
970 * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
971 * read.c (read_begin): Likewise.
972 * doc/as.texinfo: Add documentation for the -mccs command line
974 * doc/c-arm.texi: Likewise.
975 * doc/internals.texi: Document tc_line_separator_chars.
976 * NEWS: Mention the new feature.
978 2014-03-18 Jiong Wang <jiong.wang@arm.com>
980 * config/tc-aarch64.c (aarch64_opts): Add new option
982 (verbose_error_p): Initialize to 1.
983 * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
984 and -mno-verbose-error.
986 2014-03-17 Nick Clifton <nickc@redhat.com>
989 * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
992 2014-03-13 Richard Earnshaw <rearnsha@arm.com>
993 Jiong Wang <Jiong.Wang@arm.com>
995 * doc/c-aarch64.texi: Clean up some formatting issues.
996 (AArch64 Options): Document -mcpu and -march.
997 (AArch64 Extensions): New node.
999 2014-03-13 Tristan Gingold <gingold@adacore.com>
1001 * config/tc-i386.c (use_big_obj): Declare.
1002 (OPTION_MBIG_OBJ): Define.
1003 (md_longopts): Add -mbig-obj option.
1004 (md_parse_option): Handle it.
1005 (md_show_usage): Display help for this option.
1006 (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
1007 * doc/c-i386.texi: Document the option.
1009 2014-03-12 Nick Clifton <nickc@redhat.com>
1012 * config/tc-aarch64.c (literal_expression): New structure.
1013 (literal_pool): Replace exp array with literal_expression array.
1014 (add_to_lit_pool): When adding a bignum cache the big value.
1015 (s_ltorg): When emitting a bignum initialise the global bignum
1016 array from the cached value.
1018 2014-03-12 Alan Modra <amodra@gmail.com>
1020 * Makefile.in: Regenerate.
1021 * config.in: Regenerate.
1022 * doc/Makefile.in: Regenerate.
1024 2014-03-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
1025 Vishnu KS <Vishnu.k_s@atmel.com>
1026 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1027 Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
1029 * gas/tc-avr.c: Add new devices
1030 avr25: ata5272, attiny828
1031 avr35: ata5505, attiny1634
1032 avr4: atmega8a, ata6285, ata6286, atmega48pa
1033 avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
1034 atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
1036 avr51: atmega128a, atmega1284
1037 avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1038 atxmega32e5, atxmega16e5, atxmega8e5
1039 avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1040 atxmega64c3, atxmega64d4
1041 avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1042 atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1043 atxmega256c3, atxmega384c3, atxmega384d3
1044 avrxmega7: atxmega128a4u
1045 * doc/c-avr.texi: Ditto.
1047 2014-03-05 Alan Modra <amodra@gmail.com>
1049 Update copyright years.
1051 2014-03-05 Alan Modra <amodra@gmail.com>
1053 * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1054 (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1056 2014-03-05 Alan Modra <amodra@gmail.com>
1058 * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1059 later. Merge absolute and relative branch reloc selection.
1060 Generate 16-bit relocs for most 16-bit insn fields given a
1061 non-constant expression.
1063 2014-03-05 Alan Modra <amodra@gmail.com>
1065 * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1066 (md_assemble): Don't call ppc_is_toc_sym for ELF.
1068 2014-03-04 Heiher <r@hev.cc>
1070 * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1073 2014-03-03 Nick Clifton <nickc@redhat.com>
1075 * config/msp430/msp430.c: Replace known mcu array with known
1076 msp430 ISA mcu name array.
1077 Accept any name for -mmcu option.
1078 Add -mz option to warn about missing NOP following an interrupt
1080 (check_for_nop): New.
1081 (msp430_operands): Emit a warning, if requested, when an interrupt
1082 changing instruction is not followed by a NOP.
1083 * doc/c-msp430.c: Document -mz option.
1085 2014-03-03 Alan Modra <amodra@gmail.com>
1087 * config/bfin-lex-wrapper.c: Correct copyright date.
1088 * config/obj-fdpicelf.c: Likewise.
1089 * config/obj-fdpicelf.h: Likewise.
1090 * config/tc-frv.c: Correct copyright punctuation.
1091 * config/tc-ip2k.c: Likewise.
1092 * config/tc-iq2000.c: Likewise.
1093 * config/tc-mep.c: Likewise.
1094 * config/tc-tic4x.c: Likewise.
1095 * config/tc-tic4x.h: Likewise.
1097 2014-03-01 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1099 * config/tc-avr.c: Remove atxmega16x1.
1101 2014-02-28 Alan Modra <amodra@gmail.com>
1103 * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1104 field for 64-bit dwarf.
1106 2014-02-21 Ilya Tocar <ilya.tocar@intel.com>
1108 * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1109 * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1111 2014-02-12 Ilya Tocar <ilya.tocar@intel.com>
1113 * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1114 * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1115 clflushopt/.clfushopt.
1117 2014-02-10 Alan Modra <amodra@gmail.com>
1119 * po/POTFILES.in: Regenerate.
1120 * po/gas.pot: Regenerate.
1122 2014-02-03 Sandra Loosemore <sandra@codesourcery.com>
1124 * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1125 (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1126 %got_hiadj relocation operators. Sort table and add comment
1127 to explain ordering.
1128 (nios2_fix_adjustable): Test for new relocs.
1129 * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1132 2014-01-30 Sandra Loosemore <sandra@codesourcery.com>
1134 * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1135 (nios2_assemble_args_m): Likewise.
1136 (md_assemble): Likewise.
1138 2014-01-24 DJ Delorie <dj@redhat.com>
1140 * config/tc-msp430.c (msp430_section): Always flag data sections,
1142 (msp430_frob_section): New. Make sure all sections are noticed if
1144 (msp430_lcomm): New. Flag bss if .lcomm is seen.
1145 (msp430_comm): New. Likewise.
1146 (md_pseudo_table): Add them.
1147 * config/tc-msp430.h (msp430_frob_section): Declare.
1148 (tc_frob_section): Define.
1150 2014-01-23 Nick Clifton <nickc@redhat.com>
1152 * config/tc-msp430.c (show_mcu_list): Delete.
1153 (md_parse_option): Accept any MCU name. Accept several more
1154 variants for the -mcpu option.
1155 (md_show_usage): Do not call show_mcu_list.
1157 2014-01-22 DJ Delorie <dj@redhat.com>
1159 * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1160 * doc/c-msp430.texi (MSP430 Directives): Document it.
1162 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1164 * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1167 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1170 * config/tc-i386.c (check_VecOperands): Add check for invalid
1171 register set in AVX512 gathers.
1173 2014-01-22 Alan Modra <amodra@gmail.com>
1175 * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1177 2014-01-21 DJ Delorie <dj@redhat.com>
1179 * config/tc-rl78.c (require_end_of_expr): New.
1180 (md_operand): Call it.
1181 (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1184 2014-01-17 Will Newton <will.newton@linaro.org>
1186 * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1187 for the s32.f64 flavours of VCVT.
1189 2014-01-14 Nick Clifton <nickc@redhat.com>
1192 * config/tc-z80.c (wrong_match): Provide format string to
1194 (parse_exp_not_indexed): Delete unused variable dummy.
1195 (emit_byte): Delete unused variable fixp.
1197 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1199 * config/tc-i386.c (regbnd): Removed.
1200 (vec_disp8): Likewise.
1202 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1204 * as.c (parse_args): Update copyright year to 2014.
1206 2014-01-07 Tom Tromey <tromey@redhat.com>
1208 * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1211 2014-01-07 Tom Tromey <tromey@redhat.com>
1213 * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1216 2014-01-07 Tom Tromey <tromey@redhat.com>
1218 * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1220 2013-01-07 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
1222 * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1224 For older changes see ChangeLog-2013
1226 Copyright (C) 2014 Free Software Foundation, Inc.
1228 Copying and distribution of this file, with or without modification,
1229 are permitted in any medium without royalty provided the copyright
1230 notice and this notice are preserved.
1236 version-control: never