gas/ChangeLog-2015

   1 2015-12-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>
   2
   3         * config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
   4         shared between ARMv6T2 and ARMv8-M.
   5         (move_or_literal_pool): Check mov.w/mvn and movw availability against
   6         arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
   7         arm_arch_t2.
   8         (do_t_branch): Error out for wide conditional branch instructions if
   9         targetting ARMv8-M Baseline.
  10         (non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
  11         in ARMv8-M Baseline.
  12         (wide_insn_ok): New function.
  13         (md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
  14         adapt error message for unsupported wide instruction to ARMv8-M
  15         Baseline.
  16         (insns): Reorganize instructions shared by ARMv8-M Baseline and
  17         ARMv6t2 architecture.
  18         (arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
  19         marvell-whitney cores.
  20         (arm_archs): Define armv8-m.base architecture.
  21         (cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
  22         (aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
  23         ARMv8-M Mainline.  Set Tag_DIV_use for ARMv8-M Baseline as well.
  24
  25 2015-12-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>
  26
  27         * config/tc-arm.c (arm_ext_m): Include ARMv8-M.
  28         (arm_ext_v8m): New feature for ARMv8-M.
  29         (arm_ext_atomics): New feature for ARMv8 atomics.
  30         (do_tt): New encoding function for TT* instructions.
  31         (insns): Add new entries for ARMv8-M specific instructions and
  32         reorganize the ones shared by ARMv8-M Mainline and ARMv8-A.
  33         (arm_archs): Define armv8-m.main architecture.
  34         (cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and
  35         clarify the ordering rule.
  36         (aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to
  37         Tag_CPU_arch values for ARMv7e-M detection.  Add logic to keep setting
  38         Tag_CPU_arch to ARMv8-A for -march=all.  Also set Tag_CPU_arch_profile
  39         to 'A' if extension bit for atomic instructions is set, unless it is
  40         ARMv8-M.  Set Tag_THUMB_ISA_use to 3 for ARMv8-M.  Set Tag_DIV_use to 0
  41         for ARMv8-M Mainline.
  42
  43 2015-12-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>
  44
  45         * config/tc-arm.c (move_or_literal_pool): Check mov.w, mvm and movw
  46         availability against arm_ext_v6t2 instead of checking arm_arch_t2,
  47         fixing comments along the way.
  48         (handle_it_state): Check arm_ext_v6t2 instead of arm_arch_t2 to
  49         generate IT instruction.
  50         (t1_isa_t32_only_insn): New function.
  51         (md_assemble): Use above new function to check for invalid wide
  52         instruction for CPU Thumb ISA and to determine what Thumb extension
  53         bit is necessary for that instruction.
  54         (md_apply_fix): Use arm_ext_v6t2 instead of arm_arch_t2 to decide if
  55         branch is out of range.
  56
  57 2015-12-21  Nick Clifton  <nickc@redhat.com>
  58
  59         PR gas/19386
  60         * doc/as.texinfo (Strings): Prepend a space to index entries that
  61         start with a backslash.  This works around a problem in the pdf
  62         generator.
  63
  64 2015-12-18  H.J. Lu  <hongjiu.lu@intel.com>
  65
  66         * config/tc-i386.c (optimize_imm): Store 32-bit immediate in
  67         64-bit only for 64-bit BFD.
  68         (optimize_disp): Optimize 64-bit displacement to 32-bit only
  69         for 64-bit BFD.
  70
  71 2015-12-17  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
  72
  73         * config/tc-arm.c (aeabi_set_public_attributes): Adjust
  74         TAG_ARCH_profile for armv8-a.
  75
  76 2015-12-16 Mickael Guene <mickael.guene@st.com>
  77
  78         * doc/c-arm.texi: Add documentation about new directives
  79         * config/tc-arm.c (group_reloc_table): Add mapping between gas
  80         syntax and new relocations.
  81         (do_t_add_sub): Keep new relocations for add operand.
  82         (do_t_mov_cmp): Keep new relocations for mov operand.
  83         (insns): Use 'shifter operand with possible group relocation'
  84         operand parse code for movs operand.
  85         (md_apply_fix): Implement mov and add encoding when new
  86         relocations on them.
  87         (tc_gen_reloc): Add new relocations.
  88         (arm_fix_adjustable): Since offset has a limited range ([0:255])
  89         we disable adjust_reloc_syms() for new relocations.
  90
  91 2015-12-15  Nick Clifton  <nickc@redhat.com>
  92
  93         * doc/c-msp430.texi (MSP430 Options): Remove references to a
  94         non-existant silicon errata.
  95         * config/tc-msp430.c: Likewise.
  96
  97 2015-12-14  Matthew Wahab  <matthew.wahab@arm.com>
  98
  99         * config/tc-aarch64.c (parse_neon_type_for_operand): Adjust to
 100         take into account new vector type 2H.
 101         (vectype_to_qualifier): Likewise.
 102
 103 2015-12-14  Matthew Wahab  <matthew.wahab@arm.com>
 104
 105         * config/tc-aarch64.c (vectype_to_qualifier): Calculate operand
 106         qualifier from per-type base and offet.
 107
 108 2015-12-14  Yoshinori Sato <ysato@users.sourceforge.jp>
 109
 110         * config/rx-defs.h(rx_cpu_type): Add RXV2 type.
 111         * config/tc-rx.c(cpu_type_list): New type lookup table.
 112         (md_parse_option): Use lookup table for choose cpu.
 113         (md_show_usage): Add rxv2 for mcpu option.
 114         * doc/c-rx.texi: Likewise.
 115         * config/rx-parse.y: Add v2 instructions and ACC register.
 116         (rx_check_v2): check v2 type.
 117
 118 2015-12-14  Jan Beulich  <jbeulich@suse.com>
 119
 120         * dw2gencfi.c (dot_cfi_label): Free "name".
 121
 122 2015-12-11  Matthew Wahab  <matthew.wahab@arm.com>
 123
 124         * config/tc-aarch64.c (aarch64_hint_opt_hsh): New.
 125         (parse_barrier_psb): New.
 126         (parse_operands): Add case for AARCH64_OPND_BARRIER_PSB.
 127         (md_begin): Set up aarch64_hint_opt_hsh.
 128
 129 2015-12-11  Matthew Wahab  <matthew.wahab@arm.com>
 130
 131         * config/tc-aarch64.c (aarch64_features): Add "profile".
 132         * doc/c-aarch64.texi (AArch64 Extensions): Add "profile".
 133
 134 2015-12-10  Matthew Wahab  <matthew.wahab@arm.com>
 135
 136         * config/tc-aarch64.c (parse_sys_ins_reg): Add check of
 137         architectural support for system register.
 138
 139 2015-12-10  Jose E. Marchesi  <jose.marchesi@oracle.com>
 140
 141         * doc/c-sparc.texi (Sparc-Regs): Document the %dN and %qN notation
 142         for floating-point registers.
 143
 144 2015-12-10  Matthew Wahab  <matthew.wahab@arm.com>
 145
 146         * doc/c-aarch64.texi (AArch64 Extensions): Update entry for crc.
 147
 148 2015-12-10  Andrew Burgess  <andrew.burgess@embecosm.com>
 149
 150         * config/tc-arc.c (md_parse_option): Return 1 in order to accept
 151         dummy arguments.
 152
 153 2015-12-09  Jose E. Marchesi  <jose.marchesi@oracle.com>
 154
 155         * config/tc-sparc.c (sparc_ip): Support %dN and %qN notation for
 156         double and quad-precision floating-point registers.
 157
 158 2015-12-09  Nick Clifton  <nickc@redhat.com>
 159
 160         * config/tc-rx.c (rx_relax_frag): Fix compile time warning.
 161
 162 2015-12-08  Jan Beulich  <jbeulich@suse.com>
 163
 164         * read.c (in_bss): New.
 165         (do_align): Use it to also warn for non-zero fill in .bss.
 166         (do_org): Likewise.
 167         (s_space): Likewise.
 168         (s_fill): Error on bad use in .bss/.struct.
 169         (float_cons): Likewise.
 170         (emit_leb128_expr): Likewise.
 171         (emit_expr_with_reloc): Defer handling use inside .struct. Also
 172         error on non-zero item added to .bss.
 173         (stringer_append_char): Error on non-zero character.
 174
 175 2015-12-08  Jan Beulich  <jbeulich@suse.com>
 176
 177         * read.c (stringer): Move absolute section check up. Return
 178         right away.
 179
 180 2015-12-08  Jan Beulich  <jbeulich@suse.com>
 181
 182         * config/obj-elf.c (elf_file_symbol): Tighten condition for
 183         moving BSF_FILE symbols.
 184
 185 2015-12-08  DJ Delorie  <dj@redhat.com>
 186
 187         * config/rl78-parse.y: Make all branches relaxable via
 188         rl78_linkrelax_branch().
 189         * config/tc-rl78.c (rl78_linkrelax_branch): Mark all relaxable
 190         branches with relocs.
 191         (options): Add OPTION_NORELAX.
 192         (md_longopts): Add -mnorelax.
 193         (md_parse_option): Support OPTION_NORELAX.
 194         (op_type_T): Add bh, sk, call, and br.
 195         (rl78_opcode_type): Likewise.
 196         (rl78_relax_frag): Fix not-relaxing logic.  Add sk.
 197         (md_convert_frag): Fix relocation handling.
 198         (tc_gen_reloc): Strip relax relocs when not linker relaxing.
 199         (md_apply_fix): Defer overflow handling for anything that needs a
 200         PLT, to the linker.
 201         * config/tc-rl78.h (TC_FORCE_RELOCATION): Force all relocations to
 202         the linker when linker relaxing.
 203         * doc/c-rl78.texi (norelax): Add.
 204
 205 2015-12-07  Alan Modra  <amodra@gmail.com>
 206
 207         * config/tc-ppc.c (md_apply_fix): Localize variables.  Reduce casts.
 208
 209 2015-12-04  Nick Clifton  <nickc@redhat.com>
 210
 211         PR gas/19276
 212         * config/tc-arm.h (SUB_SEGMENT_ALIGN): Do not define for COFF/PE
 213         targets.
 214
 215 2015-12-04  Claudiu Zissulescu  <claziss@synopsys.com>
 216
 217         * config/tc-arc.c (arc_option): Sets all internal gas options when
 218         parsing .cpu directive.
 219         (declare_register_set): Declare all 64 registers.
 220         (md_section_align): Refactor.
 221         (md_pcrel_from_section): Remove assert.
 222         (pseudo_operand_match): Fix pseudo operand match.
 223         (find_reloc): Use flags filed, extend matching.
 224         * config/tc-arc.h (TC_VALIDATE_FIX): Don't fixup any PLT
 225         relocation.
 226
 227 2015-12-01  Alan Modra  <amodra@gmail.com>
 228
 229         * config/aout_gnu.h: Invoke aout N_* macros with pointer to
 230         struct internal_exec.
 231
 232 2015-11-27  Matthew Wahab  <matthew.wahab@arm.com>
 233
 234         * config/tc-aarch64.c (aarch64_features): Add "fp16".
 235         * doc/c-aarch64.texi (Architecture Extensions): Add "fp16".
 236
 237 2015-11-24  Christophe Monat <christophe.monat@st.com>
 238
 239         * config/tc-arm.c (move_or_literal_pool): Do not transform ldr
 240         ri,=imm into movs when ri is a high register in T1.
 241
 242 2015-11-20  Nick Clifton  <nickc@redhat.com>
 243
 244         * po/fr.po: Updated French translation.
 245         * po/uk.po: Updated Ukraninan translation.
 246         * po/zh_CN.po: New simplified Chinese translation.
 247         * configure.ac (ALL_LINGUAS): Add zh_CN.
 248         * configure: Regenerate.
 249
 250 2015-11-19  Matthew Wahab  <matthew.wahab@arm.com>
 251
 252         * config/tc-arm.c (arm_archs): Add "armv8.2-a".
 253         * doc/c-arm.texi (-march): Add "armv8.2-a".
 254
 255 2015-11-19  Matthew Wahab  <matthew.wahab@arm.com>
 256
 257         * config/tc-aarch64.c (aarch64_archs): Add "armv8.2-a".
 258         * doc/c-aarch64.texi (-march): Likewise.
 259
 260 2015-11-19  Alan Modra  <amodra@gmail.com>
 261
 262         * read.c (output_big_leb128): Describe "sign" parameter.
 263
 264 2015-11-19  Alan Modra  <amodra@gmail.com>
 265
 266         * config/tc-ppc.h (SUB_SEGMENT_ALIGN): Define only for ELF.
 267
 268 2015-11-16  Mike Frysinger  <vapier@gentoo.org>
 269
 270         * config/tc-microblaze.c (parse_imm): Add an offsetT cast.
 271
 272 2015-11-13  Tristan Gingold  <gingold@adacore.com>
 273
 274         * configure: Regenerate.
 275
 276 2015-11-13  Tristan Gingold  <gingold@adacore.com>
 277
 278         * NEWS: Add marker for 2.26.
 279
 280 2015-11-12  James Greenhalgh  <james.greenhalgh@arm.com>
 281
 282         * config/tc-aarch64.c (aarch64_cpus): Add cortex-a35.
 283         * doc/c-aarch64.texi (-mcpu=): Likewise.
 284
 285 2015-11-12  James Greenhalgh  <james.greenhalgh@arm.com>
 286
 287         * config/tc-arm.c (arm_cpus): Likewise.
 288         * doc/c-arm.texi (-mcpu=): Likewise.
 289
 290 2015-11-12  Matthew Wahab  <matthew.wahab@arm.com>
 291
 292         PR gas/19217
 293         * config/tc-arm.c (move_or_literal_pool): Remove redundant feature
 294         check.  Fix some code formatting.  Drop use of MOVT.  Add some
 295         comments.
 296
 297 2015-11-11  Alan Modra  <amodra@gmail.com>
 298             Peter Bergner <bergner@vnet.ibm.com>
 299
 300         * doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9.
 301         * doc/c-ppc.texi (PowerPC-Opts):  Likewise.
 302         * config/tc-ppc.c (md_show_usage): Likewise.
 303         (md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA.
 304         (md_apply_fix): Likewise.
 305         (ppc_handle_align): Handle power9's group ending nop.
 306
 307 2015-11-09  Jim Wilson  <jim.wilson@linaro.org>
 308
 309         * config/tc-aarch64.c (aarch64_cpus): Add qdf24xx.
 310         * config/tc-arm.c (arm_cpus): Likewise.
 311         * doc/c-arm.texi, doc/c-aarch64.texi: Likewise.
 312
 313 2015-11-09  Dominik Vogt  <vogt@linux.vnet.ibm.com>
 314
 315         * read.c (parse_bitfield_cons): Fix left shift of negative value.
 316         * config/tc-xstormy16.c (md_section_align): Likewise.
 317         * config/tc-xgate.c (md_section_align): Likewise.
 318         * config/tc-visium.c (md_section_align): Likewise.
 319         * config/tc-v850.c (md_section_align): Likewise.
 320         * config/tc-tic6x.c (md_section_align): Likewise.
 321         * config/tc-sh.c (SH64PCREL32_M, SH64PCREL48_M, SH64PCREL32_M)
 322         (MOVI_32_M, MOVI_48_M, MOVI_32_M, md_section_align): Likewise.
 323         * config/tc-sh64.c (shmedia_md_estimate_size_before_relax): Likewise.
 324         * config/tc-score.c (s3_section_align): Likewise.
 325         * config/tc-score7.c (s7_section_align): Likewise.
 326         * config/tc-s390.c (md_section_align): Likewise.
 327         * config/tc-rx.c (md_section_align): Likewise.
 328         * config/tc-rl78.c (md_section_align): Likewise.
 329         * config/tc-ppc.c (md_section_align): Likewise.
 330         * config/tc-or1k.c (md_section_align): Likewise.
 331         * config/tc-nds32.c (md_section_align): Likewise.
 332         * config/tc-mt.c (md_section_align): Likewise.
 333         * config/tc-msp430.c (md_section_align): Likewise.
 334         * config/tc-mn10300.c (md_section_align): Likewise.
 335         * config/tc-mn10200.c (md_section_align): Likewise.
 336         * config/tc-mips.c (md_section_align): Likewise.
 337         * config/tc-microblaze.c (parse_imm): Likewise.
 338         * config/tc-mep.c (md_section_align): Likewise.
 339         * config/tc-m68k.c (md_section_align): Likewise.
 340         * config/tc-m68hc11.c (md_section_align): Likewise.
 341         * config/tc-m32r.c (md_section_align): Likewise.
 342         * config/tc-m32c.c (md_section_align): Likewise.
 343         * config/tc-lm32.c (md_section_align): Likewise.
 344         * config/tc-iq2000.c (md_section_align): Likewise.
 345         * config/tc-ip2k.c (md_section_align): Likewise.
 346         * config/tc-ia64.c (dot_save, dot_vframe): Likewise.
 347         * config/tc-i960.c (md_number_to_field, md_section_align): Likewise.
 348         * config/tc-i386.c (md_section_align): Likewise.
 349         * config/tc-i370.c (md_section_align): Likewise.
 350         * config/tc-frv.c (md_section_align): Likewise.
 351         * config/tc-fr30.c (md_section_align): Likewise.
 352         * config/tc-epiphany.c (md_section_align): Likewise.
 353         * config/tc-d30v.c (md_section_align): Likewise.
 354         * config/tc-d10v.c (md_section_align): Likewise.
 355         * config/tc-cr16.c (l_cons): Likewise.
 356         * config/tc-bfin.c (md_section_align): Likewise.
 357         * config/tc-arm.c (md_section_align): Likewise.
 358         * config/tc-arc.c (md_section_align): Likewise.
 359         * config/bfin-parse.y (expr_1): Likewise.
 360
 361 2015-11-02  Nick Clifton  <nickc@redhat.com>
 362
 363         * config/rx-parse.y: Allow zero value for 5-bit displacements.
 364
 365 2015-11-02  Nick Clifton  <nickc@redhat.com>
 366
 367         * config/tc-rx.c (parse_rx_section): Align parameter provides a
 368         multiple of n argument, not a power of n argument.
 369
 370 2015-10-29  Nick Clifton  <nickc@redhat.com>
 371
 372         * config/tc-aarch64.c (elf64_aarch64_target_format): Select the
 373         cloudabi format if the TARGET_OS is cloudabi.
 374
 375 2015-10-29  Thomas Preud'homme  <thomas.preudhomme@arm.com>
 376
 377         * config/tc-arm.c (insns): Guard cps by arm_ext_v6_notm instead of
 378         arm_ext_v6_dsp.
 379
 380 2015-10-28  Claudiu Zissulescu  <claziss@synopsys.com>
 381
 382         * config/tc-arc.c (tokenize_arguments): Avoid creating unused
 383         symbols when parsing relocation types.
 384         (md_apply_fix): Handle TLS relocations. Fix BFD_RELOC_ARC_32_PCREL
 385         relocation.
 386         (arc_check_reloc): Emit BFD_RELOC_ARC_32_PCREL relocation.
 387
 388 2015-10-27  Jim Wilson  <jim.wilson@linaro.org>
 389
 390         * config/tc-arm.c (selected_cpu_name): Increase length of array to
 391         accomodate "Samsung Exynos M1".
 392         (arm_parse_cpu): Add assertion and length check to prevent
 393         overfilling selected_cpu_name.
 394
 395 2015-10-22  Nick Clifton  <nickc@redhat.com>
 396
 397         * config/tc-msp430.c (PUSH_1X_WORKAROUND): Delete.
 398         (OPTION_SILICON_ERRATA): Define.
 399         (OPTION_SILICON_WARN): Define.
 400         (md_parse_opton): Handle silicon errata options.
 401         (md_longopts): Add silicon errata options.
 402         (ms_show_usage): Report silicon errata options.
 403         (msp430_srcoperand): Handle silicon errata.
 404         (msp430_operands): Likewise. Improve nop insertion.
 405         (msp430_fix_adjustable): Update warning generation.
 406         * doc/c-msp430.texi: Document silicon errata options.
 407
 408 2015-10-22  H.J. Lu  <hongjiu.lu@intel.com>
 409
 410         * configure.ac: Properly check
 411         --enable-compressed-debug-sections={yes,all}.
 412         * configure: Regenerated.
 413
 414 2015-10-22  H.J. Lu  <hongjiu.lu@intel.com>
 415
 416         PR gas/19109
 417         * configure.ac: Handle --enable-compressed-debug-sections=*,gas,*.
 418         * configure: Regenerated.
 419
 420 2015-10-22  H.J. Lu  <hongjiu.lu@intel.com>
 421
 422         * config/tc-i386.c (tc_i386_fix_adjustable): Handle
 423         BFD_RELOC_X86_64_GOTPCRELX and BFD_RELOC_X86_64_REX_GOTPCRELX.
 424         (tc_gen_reloc): Likewise.
 425         (i386_validate_fix): Generate BFD_RELOC_X86_64_GOTPCRELX or
 426         BFD_RELOC_X86_64_REX_GOTPCRELX if fx_tcbit2 is set.
 427         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Also return
 428         true for BFD_RELOC_X86_64_GOTPCRELX and
 429         BFD_RELOC_X86_64_REX_GOTPCRELX.
 430
 431 2015-10-22  H.J. Lu  <hongjiu.lu@intel.com>
 432
 433         * config/tc-i386.c (tc_i386_fix_adjustable): Handle
 434         BFD_RELOC_386_GOT32X.
 435         (tc_gen_reloc): Likewise.
 436         (match_template): Force 0x8b encoding for "mov foo@GOT, %eax".
 437         (output_disp): Check for "call/jmp *mem", "mov mem, %reg",
 438         "test %reg, mem" and "binop mem, %reg" where binop is one of
 439         adc, add, and, cmp, or, sbb, sub, xor instructions.  Set
 440         fx_tcbit if the REX prefix is generated.  Set fx_tcbit2 if
 441         BFD_RELOC_386_GOT32X should be generated.
 442         (i386_validate_fix): Generate BFD_RELOC_386_GOT32X if fx_tcbit2
 443         is set.
 444
 445 2015-10-21  Nick Clifton  <nickc@redhat.com>
 446
 447         PR gas/19109
 448         * configure.ac: Restore --enable-compressed-debug-sections, with
 449         options of all, none or gas.
 450         Do not enable compressed debug sections by default for x86 Linux
 451         targets.
 452         * configure: Regenerate.
 453
 454 2015-10-20  H.J. Lu  <hongjiu.lu@intel.com>
 455
 456         PR gas/19109
 457         * NEWS: Update --enable-compressed-debug-sections=.
 458         * configure.ac: Remove --enable-compressed-debug-sections.
 459         (DEFAULT_FLAG_COMPRESS_DEBUG): Check
 460         --enable-compressed-debug-sections={all,gas} instead of
 461         --enable-compressed-debug-sections.  For x86 Linux targets,
 462         default to compressing debug sections.
 463         * configure: Regenerated.
 464
 465 2015-10-19  Nick Clifton  <nickc@redhat.com>
 466
 467         PR gas/19109
 468         * configure.ac: Add option --enable-compressed-debug-sections.
 469         This sets the default behaviour for compressing debug sections.
 470         * as.c (flag_compress_debug): Define and initialise to
 471         COMPRESS_DEBUG_GABI_ZLIB if DEFAULT_COMPRESS_DEBUG is set.
 472         (show_usage): Indicate whether --no-compress-debug-sections
 473         or --compress-debug-sections is the default.
 474         * config/tc-i386.c (flag_compress_debug): Delete definition.
 475         * doc/as.texinfo (--nocompress-debug-sectionas): Update
 476         description.
 477         * NEWS: Announce the new feature.
 478         * config.in: Regenerate.
 479         * configure: Regenerate.
 480
 481 2015-10-12  Nick Clifton  <nickc@redhat.com>
 482
 483         * config/tc-msp430.c (msp430_mcu_names): Rename to
 484         msp430_mcu_data.  Add fields for the ISA and hardware multiply
 485         support.  Update with information from the latest devices.csv
 486         file.
 487         (md_parse_option): Make use of the new array.
 488
 489 2015-10-12  Andrew Burgess  <andrew.burgess@embecosm.com>
 490
 491         * config/tc-avr.c (avr_output_property_record): Fix overwrite bug
 492         for align and fill records.
 493         (avr_handle_align): Record fill information for align frags.
 494         (create_record_for_frag): Add next frag assertion, use correct
 495         address for align records.
 496
 497 2015-10-10  Alan Modra  <amodra@gmail.com>
 498
 499         PR gas/19113
 500         * read.c (next_char_of_string): Mask char after escape.  Use
 501         CHAR_MASK rather than 0xff.
 502
 503 2015-10-07  Yao Qi  <yao.qi@linaro.org>
 504
 505         * config/tc-aarch64.c (md_begin): Access field 'name' rather
 506         than 'template'.
 507
 508 2015-10-07  Claudiu Zissulescu  <claziss@synopsys.com>
 509
 510         * config/tc-arc.c: Revamped file for ARC support.
 511         * config/tc-arc.h: Likewise.
 512         * doc/as.texinfo: Add new ARC options.
 513         * doc/c-arc.texi: Likewise.
 514
 515 2015-10-02  Renlin Li <renlin.li@arm.com>
 516
 517         * config/tc-aarch64.c (s_tlsdescadd): New.
 518         (s_tlsdescldr): New.
 519         (md_pseudo_table): Handle tlsdescadd and tlsdescldr pseudo ops.
 520         (reloc_table): Add entries for BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC and
 521         BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC.
 522         (process_movw_reloc_info): Support AARCH64_TLSDESC_OFF_G1 and
 523         AARCH64_TLSDESC_OFF_G0_NC.
 524         (md_apply_fix): Likewise.
 525         (aarch64_force_relocation): Likewise.
 526
 527 2015-10-02  Renlin Li <renlin.li@arm.com>
 528
 529         * config/tc-aarch64.c (reloc_table): Add two entries for
 530         gottprel_g0_nc and gottprel_g1.
 531         (process_movw_reloc_info): Add support.
 532         (md_apply_fix): Likewise.
 533         (aarch64_force_relocation): Likewise.
 534
 535 2015-10-02  Renlin Li <renlin.li@arm.com>
 536
 537         * config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g0_nc.
 538         (process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1.
 539         (md_apply_fix): Likewise.
 540         (aarch64_force_relocation): Likewise.
 541
 542 2015-10-02  Renlin Li <renlin.li@arm.com>
 543
 544         * config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g1.
 545         (process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1.
 546         (md_apply_fix): Likewise.
 547         (aarch64_force_relocation): Likewise.
 548
 549 2015-10-02  Renlin Li <renlin.li@arm.com>
 550
 551         * config/tc-aarch64.c (reloc_table): New relocation modifier
 552         gotoff_g0_nc.
 553         (process_movw_reloc_info): Support gotoff_g0_nc.
 554         (md_apply_fix): Likewise.
 555
 556 2015-10-02  Renlin Li  <renlin.li@arm.com>
 557
 558         * config/tc-aarch64.c (reloc_table): New relocation modifier
 559         gotoff_g1.
 560         (process_movw_reloc_info): Support newly added modifier.
 561         (md_apply_fix): Likewise.
 562
 563 2015-09-29  Dominik Vogt  <vogt@linux.vnet.ibm.com>
 564
 565         * doc/c-s390.texi: Add documentation.
 566         Add missing code markup.
 567         * config/tc-s390.c (current_flags): New static variable.
 568         (s390_parse_cpu): Parse cpu flags a la "+nohtm" etc.
 569         (s390_setup_opcodes): Use cpu flags to determine the set of opcodes.
 570         Fix indentation.
 571         (md_parse_option): Call s390_parse_cpu with the new signature.
 572         (s390_machine): Likewise.
 573         Keep track of current_flags.
 574         Simplify code a bit.
 575         undefine MAX_HISTORY at end of function.
 576         (s390_machinemode): undefine MAX_HISTORY at end of function.
 577         Update an error message.
 578
 579 2015-08-11  Peter Zotov  <whitequark@whitequark.org>
 580
 581         PR ld/18759
 582         * config/tc-or1k.c (tc_gen_reloc): Correct computation of PC
 583         relative relocs.
 584         * config/tc-or1k.h (GAS_CGEN_PRCEL_R_TYPE): Delete.
 585
 586 2015-09-25  Ryo ONODERA  <ryo_on@yk.rim.or.jp>
 587
 588         PR 18994
 589         * configure.ac (nds32): Don't use bash == in tests.
 590         * configure: Regenerate.
 591
 592 2015-09-23  Nick Clifton  <nickc@redhat.com>
 593
 594         * config/tc-ppc.c (insn_validate): Cast PPC_OPSHIFT_INV to an int.
 595
 596 2015-09-22  Nick Clifton  <nickc@redhat.com>
 597
 598         * config/tc-rx.c (nop_7): Recode using MAX.
 599
 600 2015-09-05  Chen Gang  <gang.chen.5i5j@gmail.com>
 601
 602         * config/tc-avr.c (md_section_align): Append UL for -1 to avoid
 603         the latest gcc's warning.
 604
 605 2015-08-27  Alan Modra  <amodra@gmail.com>
 606
 607         PR gas/18581
 608         * config/tc-aarch64.h (TC_START_LABEL): Redefine.
 609         * config/tc-arm.c (tc_start_label_without_colon): Delete params.
 610         Use input_line_pointer directly.
 611         * config/tc-arm.h (TC_START_LABEL): Redefine.
 612         (TC_START_LABEL_WITHOUT_COLON): Redefine.
 613         (tc_start_label_without_colon): Update prototype.
 614         * config/tc-bfin.c (bfin_start_label): Delete ptr param.  Check
 615         for NUL instead.
 616         * config/tc-bfin.h (bfin_start_label): Update prototype.
 617         (TC_START_LABEL): Redefine.
 618         * config/tc-d30v.h (TC_START_LABEL): Redefine.
 619         * config/tc-fr30.c (restore_colon): Rewrite.
 620         (fr30_is_colon_insn): Add nul_char param.  Return int.  Bump
 621         i_l_p over quote.  Update restore_colon calls.
 622         * config/tc-fr30.h (TC_START_LABEL): Redefine.
 623         (fr30_is_colon_insn): Update prototype.
 624         * config/tc-m32c.c (restore_colon, m32c_is_colon_insn): As above.
 625         * config/tc-m32c.h (TC_START_LABEL): Redefine.
 626         (m32c_is_colon_insn): Update prototype.
 627         * config/tc-m32r.h (TC_START_LABEL): Redefine.
 628         * config/tc-mep.h (TC_START_LABEL): Redefine.
 629         * config/tc-nds32.h (TC_START_LABEL): Redefine.
 630         * config/tc-tic54x.c (tic54x_start_label): Replace params with
 631         nul_char and next_char.  Step over trailing quote.
 632         * config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Redefine.
 633         (tic54x_start_label): Update prototype.
 634         * read.c (TC_START_LABEL): Redefine.  Update invocation.
 635         (TC_START_LABEL_WITHOUT_COLON): Update invocation.
 636         * config/tc-nios2.c (s_nios2_set): Save initial input_line_pointer
 637         and restore if calling s_set.  Don't restore delim again.
 638
 639 2015-08-26  Alan Modra  <amodra@gmail.com>
 640
 641         PR gas/18581
 642         * config/tc-mn10200.c (md_assemble <mdr>): Move restore_line_pointer
 643         call to where input line used to be restored.
 644         * config/tc-mn10300.c (md_assemble <usp>): Remove redundant input
 645         line restore.
 646         * config/tc-tilepro.c (parse_reg_expression): Add regname var.
 647
 648 2015-08-26  Nick Clifton  <nickc@redhat.com>
 649
 650         PR gas/18842
 651         * configure.ac (AS_CHECK_DECLS): Add asprintf.
 652         * configure: Regenerate.
 653         * config.in: Regenerate.
 654
 655 2015-08-25  Jose E. Marchesi  <jose.marchesi@oracle.com>
 656
 657         * config/tc-sparc.c (priv_reg_table): New privileged register
 658         %pmcdper.
 659
 660 2015-08-21  Nick Clifton  <nickc@redhat.com>
 661
 662         PR gas/18581
 663         * expr.c (get_symbol_end): Rename to get_symbol_name.  Add a
 664         return parameter pointing to the start of the symbol.  Allow
 665         symbol names enclosed in double quotes.
 666         (restore_line_pointer): New function.  Replace the NUL character
 667         inserted into the input stream with the given character.  If the
 668         character was a double quote, advance the input pointer.
 669         * expr.h (get_symbol_end): Delete.
 670         (get_symbol_name): Add prototype.
 671         (restore_line_pointer): Prototype.
 672         * read.h (SKIP_WHITESPACE_AFTER_NAME): New macro.
 673         * doc/as.texinfo (Symbol Intro): Document that symbol names can
 674         now be enclosed in double quotes.
 675         * cond.c (s_ifdef): Replace get_symbol_end with get_symbol_name.
 676         Use restore_line_pointer to replace the NUL in the input stream.
 677         Use SKIP_WHITESPACE_AFTER_NAME to skip past the end of a symbol.
 678         Check for the use of double quoted symbol names.
 679         * expr.c: Likewise.
 680         * config/obj-aout.c: Likewise.
 681         * config/obj-coff-seh.c: Likewise.
 682         * config/obj-coff.c: Likewise.
 683         * config/obj-elf.c: Likewise.
 684         * config/obj-evax.c: Likewise.
 685         * config/obj-macho.c: Likewise.
 686         * config/obj-som.c: Likewise.
 687         * config/tc-alpha.c: Likewise.
 688         * config/tc-arc.c: Likewise.
 689         * config/tc-arm.c: Likewise.
 690         * config/tc-dlx.c: Likewise.
 691         * config/tc-h8300.c: Likewise.
 692         * config/tc-hppa.c: Likewise.
 693         * config/tc-i370.c: Likewise.
 694         * config/tc-i386-intel.c: Likewise.
 695         * config/tc-i386.c: Likewise.
 696         * config/tc-i960.c: Likewise.
 697         * config/tc-ia64.c: Likewise.
 698         * config/tc-iq2000.c: Likewise.
 699         * config/tc-m32r.c: Likewise.
 700         * config/tc-m68hc11.c: Likewise.
 701         * config/tc-m68k.c: Likewise.
 702         * config/tc-microblaze.c: Likewise.
 703         * config/tc-mips.c: Likewise.
 704         * config/tc-mmix.c: Likewise.
 705         * config/tc-mn10200.c: Likewise.
 706         * config/tc-mn10300.c: Likewise.
 707         * config/tc-nios2.c: Likewise.
 708         * config/tc-ppc.c: Likewise.
 709         * config/tc-s390.c: Likewise.
 710         * config/tc-score.c: Likewise.
 711         * config/tc-score7.c: Likewise.
 712         * config/tc-sparc.c: Likewise.
 713         * config/tc-tic4x.c: Likewise.
 714         * config/tc-tic54x.c: Likewise.
 715         * config/tc-tic6x.c: Likewise.
 716         * config/tc-tilegx.c: Likewise.
 717         * config/tc-tilepro.c: Likewise.
 718         * config/tc-v850.c: Likewise.
 719         * config/tc-xtensa.c: Likewise.
 720         * config/tc-z80.c: Likewise.
 721         * dw2gencfi.c: Likewise.
 722         * dwarf2dbgc.: Likewise.
 723         * ecoff.c: Likewise.
 724         * read.c: Likewise.
 725         * stabs.c: Likewise.
 726
 727 2015-08-19  Jiong Wang  <jiong.wang@arm.com>
 728
 729         * config/tc-aarch64.c (reloc_table): New relocation types support for
 730         dtprel_lo12.
 731         (ldst_lo12_determine_real_reloc_type): Support
 732         BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12,
 733         BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC,
 734         BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12,
 735         BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC,
 736         BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12,
 737         BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC,
 738         BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12,
 739         BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC.
 740         (parse_operands): Likewise.
 741         (md_apply_fix): Likewise.
 742         (aarch64_force_relocation): Likewise.
 743         (process_movw_reloc_info): Likewise.
 744
 745 2015-08-19  Jiong Wang  <jiong.wang@arm.com>
 746
 747         * config/tc-aarch64.c (reloc_table): New relocation modifiers,
 748         "dtprel_hi12", "dtprel_g0", "dtprel_g0_nc", "dtprel_g1",
 749         "dtprel_g1_nc", "dtprel_g2".
 750         (md_apply_fix): Support new relocation types.
 751         (aarch64_force_relocation): Likewise.
 752         (process_movw_reloc_info): Likewise.
 753
 754 2015-08-19  Jiong Wang  <jiong.wang@arm.com>
 755
 756         * config/tc-aarch64.c (reloc_table): New relocation modifiers.
 757         (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC.
 758         (aarch64_force_relocation): Likewise.
 759
 760 2015-08-17  Alan Modra  <amodra@gmail.com>
 761
 762         * config/tc-arm.c (s_align): Delete.
 763         (md_pseudo_table): Use s_align_ptwo for "align".
 764         * config/tc-arm.h (TC_ALIGN_ZERO_IS_DEFAULT): Define.
 765         * read.c (s_align): Modify for TC_ALIGN_ZERO_IS_DEFAULT.
 766
 767 2015-08-13  Alan Modra  <amodra@gmail.com>
 768
 769         * expr.c (operand): Rewrite handling of operands starting with "0f".
 770         If atof_generic only parses "-" or "+", treat as expression.
 771
 772 2015-08-13  Alan Modra  <amodra@gmail.com>
 773             DJ Delorie  <dj@redhat.com>
 774
 775         * expr.c (integer_constant): Return O_absent expression if eol.
 776         (operand): For targets with both LOCAL_LABELS_FB and
 777         NUMBERS_WITH_SUFFIX set, treat "0b" not followed by binary
 778         digits as a local label reference.  Correct handling of 0b prefix.
 779         If a suffix is not allowed, error on 0B.
 780
 781 2015-08-13  Alan Modra  <amodra@gmail.com>
 782
 783         * doc/as.texinfo (Local Labels): Allowed range of N in local
 784         labels is non-negative integers, not positive integers.
 785
 786 2015-08-12  David Weatherford  <weath@cadence.com>
 787
 788         * config/tc-xtensa.c (struct litpool_frag, struct litpool_seg):
 789         New structures.
 790         (xtensa_maybe_create_literal_pool_frag): New function.
 791         (litpool_seg_list, auto_litpools, auto_litpool_limit)
 792         (litpool_buf, litpool_slotbuf): New static variables.
 793         (option_auto_litpools, option_no_auto_litpools)
 794         (option_auto_litpool_limit): New enum identifiers.
 795         (md_longopts): Add entries for auto-litpools, no-auto-litpools
 796         and auto-litpool-limit.
 797         (md_parse_option): Handle option_auto_litpools,
 798         option_no_auto_litpools and option_auto_litpool_limit.
 799         (md_show_usage): Add help for --[no-]auto-litpools and
 800         --auto-litpool-limit.
 801         (xtensa_mark_literal_pool_location): Record a place for literal
 802         pool with a call to xtensa_maybe_create_literal_pool_frag.
 803         (get_literal_pool_location): Find highest priority literal pool
 804         or convert candidate to literal pool when auto-litpools are used.
 805         (xg_assemble_vliw_tokens): Create literal pool after jump
 806         instruction.
 807         (xtensa_check_frag_count): Create candidate literal pool every
 808         auto_litpool_limit frags.
 809         (xtensa_relax_frag): Add jump around literals to non-empty
 810         literal pool.
 811         (xtensa_move_literals): Estimate literal pool addresses and move
 812         unreachable literals closer to their users, converting candidate
 813         to literal pool if needed.
 814         (xtensa_switch_to_non_abs_literal_fragment): Only emit error
 815         about missing .literal_position in case auto-litpools are not
 816         used.
 817         * config/tc-xtensa.h (xtensa_relax_statesE): New relaxation
 818         state: RELAX_LITERAL_POOL_CANDIDATE_BEGIN.
 819         * doc/as.texinfo (Xtensa options):  Document --auto-litpools and
 820         --no-auto-litpools options.
 821         * doc/c-xtensa.texi (Xtensa options): Likewise.
 822
 823 2015-08-12  Simon Dardis  <simon.dardis@imgtec.com>
 824
 825         * config/tc-mips.c (move_register): Change to use 'or' only.
 826         (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Update to
 827         use or for move.
 828
 829 2015-08-11  Jiong Wang  <jiong.wang@arm.com>
 830
 831         * config/tc-aarch64.c (reloc_table): New relocation modifiers
 832         "dtprel_lo12".
 833         (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
 834         (aarch64_force_relocation): Likewise.
 835
 836 2015-08-11  Jiong Wang  <jiong.wang@arm.com>
 837
 838         * config/tc-aarch64.c (reloc_table): New relocation modifiers.
 839         (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC.
 840         (aarch64_force_relocation): Likewise.
 841
 842 2015-08-11  Jiong Wang  <jiong.wang@arm.com>
 843
 844         * config/tc-aarch64.c (reloc_table): New relocation modifiers.
 845         (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
 846         (aarch64_force_relocation): Likewise.
 847
 848 2015-08-11  Nick Clifton  <nickc@redhat.com>
 849
 850         PR gas/18765
 851         * config/tc-arm.c (move_or_literal_pool): Use U suffix to remove
 852         compile time warnings about constant expressions being shifted
 853         into bit 31.
 854         (do_iwmmxt_wldstd): Likewise.
 855         (do_iwmmxt_wrwrwr_or_imm5): Likewise.
 856         (md_assemble): Likewise.
 857
 858         PR gas/18574
 859         * config/tc-msp430.c (msp430_operands): Rewrite if statements to
 860         remove redundant checks.
 861         (md_apply_fix): Likewise.
 862
 863         PR gas/18677
 864         * config/tc-mmix.c (md_assemble): Fix typo checking operands with
 865         a numeric constant value.
 866
 867         PR gas/18678
 868         * config/tc-tic4x.c (tic4x_insn_check): Fix typo.
 869
 870         PR gas/18679
 871         * config/xtensa-relax.c (same_operand_name): Fix typo.
 872
 873 2015-08-08  Hans-Peter Nilsson  <hp@axis.com>
 874
 875         * tc-arm.c (double_to_single, is_double_a_single): Append ULL to
 876         0xFFFFFFFFFFFFF to avoid errors on 32-bit hosts.
 877
 878 2015-08-04  Thomas Preud'homme  <thomas.preudhomme@arm.com>
 879
 880         * doc/c-aarch64.texi (.xword): Document directive.
 881
 882 2015-08-03  Nick Clifton  <nickc@redhat.com>
 883
 884         * doc/as.texinfo (Overview): Add --hash-size to the synopsis and
 885         fix typo in its entry: @kindex -> @item.
 886
 887 2015-07-28  Robert Suchanek  <robert.suchanek@imgtec.com>
 888
 889         * config/tc-mips.c (mips_cpu_info_table): Add m5100 and m5101 entries.
 890         * doc/c-mips.texi: Document m5100 and m5101 for -march=.
 891
 892 2015-07-28  Robert Suchanek  <robert.suchanek@imgtec.com>
 893
 894         * config/tc-mips.c (mips_cpu_info_table): Add interaptiv entry.
 895         * doc/c-mips.text: Document -march=interaptiv.
 896
 897 2015-07-27  H.J. Lu  <hongjiu.lu@intel.com>
 898
 899         * configure: Regenerated.
 900
 901 2015-07-24  Nick Clifton  <nickc@redhat.com>
 902
 903         * config/tc-rl78.c (rl78_abs_sym): New local variable.
 904         (md_begin): Initialise the new symbol.
 905         (OPIMM): Define the value to be relative to the new symbol and not
 906         the absolute section symbol.
 907
 908 2015-07-22  Alan Modra  <amodra@gmail.com>
 909
 910         PR gas/18687
 911         * input-scrub.c (input_scrub_next_buffer): Rearrange and simplify
 912         loop.  Don't drop lines at end of file lacking a newline, add a
 913         newline instead.  Ensure partial_size is zero whenever
 914         partial_where is NULL.  Adjust buffer size for extra char.
 915         (input_scrub_push, input_scrub_begin): Adjust buffer size here too.
 916
 917 2015-07-20  Matthew Wahab  <matthew.wahab@arm.com>
 918
 919         * NEWS: Mention corrected spelling of armv6kz.
 920         * config/tc-arm.c (arm_cpus): Replace ARM_ARCH_V6ZK with
 921         ARM_ARCH_V6KZ.
 922         (arm_archs): Likewise. Also add "armv6kz" and "armv6kzt2".
 923         * doc/c-arm.texi: Replace "armv6zk" with "armv6kz".
 924
 925 2015-07-16  Jiong Wang  <jiong.wang@arm.com>
 926
 927         * config/tc-aarch64.c (reloc_table): New relocation modifiers.
 928         (md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADR_PREL21.
 929         (aarch64_force_relocation): Ditto.
 930
 931 2015-07-16  Matthew Wahab  <matthew.wahab@arm.com>
 932
 933         * config/tc-arm.c (arm_fpus): Add crypto-neon-fp-armv8.1.
 934         * doc/c-arm.texi (-mfpu=): Likewise.  Correct the entry for
 935         neon-fp-armv8.1.
 936
 937 2015-07-16  James Greenhalgh  <james.greenhalgh@arm.com>
 938
 939         * config/tc-arm.c (md_assemble): Rephrase the "selected processor does
 940         not support ARM mode" error messages.
 941
 942 2015-07-15  H.J. Lu  <hongjiu.lu@intel.com>
 943
 944         * config/tc-i386.c (flag_compress_debug): Replace
 945         COMPRESS_DEBUG_GNU_ZLIB with COMPRESS_DEBUG_GABI_ZLIB.
 946
 947 2015-07-14  H.J. Lu  <hongjiu.lu@intel.com>
 948
 949         * as.c (parse_args): Make --compress-debug-sections and
 950         --compress-debug-sections=zlib the same as
 951         --compress-debug-sections=zlib-gabi.
 952         * doc/as.texinfo: Change --compress-debug-sections and
 953         --compress-debug-sections=zlib to zlib-gabi.
 954
 955 2015-07-09  Catherine Moore  <clm@codesourcery.com>
 956
 957         * config/tc-mips.c (check_fpabi):  Handle
 958         VAL_GNU_MIPS_ABI_FP_NAN2008.
 959
 960 2015-07-08  Ciro Santilli  <ciro.santilli@gmail.com>
 961
 962         * doc/as.texinfo: Clarify case requirements for pseudo ops.
 963
 964 2015-07-08  Pitchumani Sivanupandi <pitchumani.s@atmel.com>
 965
 966         * config/tc-avr.c (tc_gen_reloc): Change 32 bit relocation to
 967         32 bit PC relative and update offset if the fixup is pc-relative.
 968         * config/tc-avr.h (DIFF_EXPR_OK): Define to enable PC relative diff
 969         relocs.
 970
 971 2015-07-03  Alan Modra  <amodra@gmail.com>
 972
 973         * config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
 974         * doc/c-ppc.texi (PowerPC-Opts): Likewise.
 975
 976 2015-07-01  Sandra Loosemore  <sandra@codesourcery.com>
 977             Cesar Philippidis  <cesar@codesourcery.com>
 978
 979         * config/tc-nios2.c (nios2_min_align): New.
 980         (nop): Replace with....
 981         (nop_r1, nop_r2, nop_r2_cdx, nop32, nop16): New.
 982         (nios2_align): Handle alignment on 2-byte boundaries when CDX
 983         instructions may be present.
 984         (s_nios2_align): Adjust reference to nop.
 985         (CDXBRANCH, IS_CDXBRANCH): New.
 986         (CDX_UBRANCH_SUBTYPE, CDX_CBRANCH_SUBTYPE): New.
 987         (nios2_relax_subtype_size): Handle 2-byte CDX branches.
 988         (nios2_relax_frag): Likewise.
 989         (md_convert_frag): Handle R2 encodings.
 990         (nios2_check_overflow): Check that low-order bits are zero
 991         before applying rightshift from howto.
 992         (nios2_check_overflow): Correct negative overflow calculation.
 993         (nios2_diagnose_overflow): Handle signed_immed12_overflow.  Issue
 994         generic overflow messages for miscellaneous instruction formats.
 995         (md_apply_fix): Recognize new R2 relocations.  For pc_relative
 996         relocations, store fixup in *valP.
 997         (nios2_reglist_mask, nios2_reglist_dir): New.
 998         (nios2_parse_reglist): New.
 999         (nios2_parse_base_register): New.
1000         (nios2_assemble_expression): Handle constant expressions designated
1001         by BFD_RELOC_NONE.
1002         (nios2_assemble_reg3): New.
1003         (nios2_assemble_arg_c): Handle R2 instruction formats.
1004         (nios2_assemble_arg_d): Likewise.
1005         (nios2_assemble_arg_s): Likewise.
1006         (nios2_assemble_arg_t): Likewise.
1007         (nios2_assemble_arg_D): New.
1008         (nios2_assemble_arg_S): New.
1009         (nios2_assemble_arg_T): New.
1010         (nios2_assemble_arg_i): Handle R2 instruction formats.
1011         (nios2_assemble_arg_I): New.
1012         (nios2_assemble_arg_u): Handle R2 instruction formats.
1013         (nios2_assemble_arg_U): New.
1014         (nios2_assemble_arg_V): New.
1015         (nios2_assemble_arg_W): New.
1016         (nios2_assemble_arg_X): New.
1017         (nios2_assemble_arg_Y): New.
1018         (nios2_assemble_arg_o): Handle R2 instruction formats.
1019         (nios2_assemble_arg_O): New.
1020         (nios2_assemble_arg_P): New.
1021         (nios2_assemble_arg_j): Handle R2 instruction formats.
1022         (nios2_assemble_arg_k): New.
1023         (nios2_assemble_arg_l): Handle R2 instruction formats.
1024         (nios2_assemble_arg_m): Likewise.
1025         (nios2_assemble_arg_M): New.
1026         (nios2_assemble_arg_N): New.
1027         (nios2_assemble_arg_e): New.
1028         (nios2_assemble_arg_f): New.
1029         (nios2_assemble_arg_g): New.
1030         (nios2_assemble_arg_h): New.
1031         (nios2_assemble_arg_R): New.
1032         (nios2_assemble_arg_B): New.
1033         (nios2_assemble_args): Handle new argument letters.
1034         (nios2_consume_arg): Likewise.
1035         (nios2_translate_pseudo_insn): Avoid dereferencing null pointer
1036         in error message.
1037         (nios2_ps_insn_info_structs): Add nop.n.
1038         (output_ubranch): Handle CDX branches.
1039         (output_cbranch): Likewise.
1040         (output_call): Handle R2 encodings.
1041         (output_movia): Likewise.
1042         (md_begin): Initialize nios2_min_align.
1043         (md_assemble): Align to nios2_min_align.  Adjust nios2_min_align
1044         if a 16-bit instruction is seen.
1045         (nios2_cons_align): Use appropriate nop pattern.
1046
1047 2015-07-01  Sandra Loosemore  <sandra@codesourcery.com>
1048             Cesar Philippidis  <cesar@codesourcery.com>
1049
1050         * config/tc-nios2.c: Adjust includes.
1051         (OPTION_MARCH): Define.
1052         (md_longopts): Add -march option.
1053         (nios2_architecture): New.
1054         (nios2_use_arch): New.
1055         (md_parse_option): Handle OPTION_MARCH.
1056         (md_show_usage): Document -march.
1057         (md_begin): Set arch in BFD.
1058         (nios2_elf_final_processing): New.
1059         * config/tc-nios2.h (elf_tc_final_processing): Define.
1060         (nios2_elf_final_processing): New.
1061         * doc/c-nios2.texi (-march): Add documentation.
1062
1063 2015-06-30  Amit Pawar  <Amit.Pawar@amd.com>
1064
1065         * config/tc-i386.c (cpu_arch): Add .mwaitx.
1066         (process_immext): Check operands for monitorx/mwaitx instructions.
1067         * doc/c-i386.texi: Document mwaitx.
1068
1069 2015-06-28  H.J. Lu  <hongjiu.lu@intel.com>
1070
1071         * as.c (parse_args): Replace COMPRESS_DEBUG_ZLIB with
1072         COMPRESS_DEBUG_GNU_ZLIB.
1073         * config/tc-i386.c (flag_compress_debug): Likewise.
1074
1075 2015-06-24  H.J. Lu  <hongjiu.lu@intel.com>
1076
1077         * doc/as.texinfo (.cfi_lsda): Remove the extra @section.
1078
1079 2015-06-19  Peter Bergner  <bergner@vnet.ibm.com>
1080
1081         * config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
1082         Allow for optional operands without insert functions.
1083
1084 2015-06-18  Nick Clifton  <nickc@redhat.com>
1085
1086         PR gas/18541
1087         * config/tc-arm.c (md_apply_fix): Add support for ADR in thumb
1088         mode against a nearby symbol.
1089
1090 2015-06-18  Nick Clifton  <nickc@redhat.com>
1091
1092         PR gas/18481
1093         * config/tc-arm.c (tc_gen_reloc): Include BFD_RELOC_ARM_TLS_LE32
1094         in the same case as BFD_RELOC_ARM_TLS_IS32.
1095
1096 2015-06-17  Nick Clifton  <nickc@redhat.com>
1097
1098         * config/tc-arm.c (is_double_a_single): Make conditional upon the
1099         availablity of a 64-bit type.  Use this type for the argument and
1100         mantissa.
1101         (double_to_single): Likewise.
1102         * config/tc-arm.c (move_or_literal_pool): Use a 64-bit type for
1103         the constant value, if available.  Generate a 64-bit value from a
1104         bignum if supported.  Only perform the second optimization for
1105         PR 18500 if the 64-bit type is available.
1106
1107 2015-06-17  Alessandro Marzocchi  <alessandro.marzocchi@gmail.com>
1108
1109         PR gas/18500
1110         * config/tc-arm.c (is_double_a_single): New function.
1111         (double_to_single): New function.
1112         (move_or_literal_pool): Add support for converting VLDR to VMOV.
1113
1114         PR gas/18499
1115         * config/tc-arm.c (move_or_literal_pool): Add support for LDR Rx,=
1116         to MOV.w or MVN.w for Thumb2.
1117
1118 2015-06-17  Nicolas Pitre <nico@linaro.org>
1119
1120         * as.c (show_usage): Document --sectname-subst.
1121         (parse_args): Add --sectname-subst.
1122         * as.h (flag_sectname_subst): New.
1123         * config/obj-elf.c (obj_elf_section_name): Add %S substitution.
1124         * doc/as.texinfo: Document it.
1125
1126 2015-06-15  Renlin Li  <renlin.li@arm.com>
1127
1128         * config/tc-aarch64.c (reloc_table): New relocation modifier.
1129         (md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTOFF_LO15.
1130         (aarch64_force_relocation): Ditto
1131
1132 2015-06-13  Mark Wielaard  <mjw@redhat.com>
1133
1134         * dwarf2dbg.c (out_header): Document EXPR->X_add_number value,
1135         out_debug_aranges depends on it.
1136         (out_debug_aranges): Track size of header to properly pad header
1137         for address alignment.
1138
1139 2015-06-11  John David Anglin  <danglin@gcc.gnu.org>
1140
1141         PR gas/18427
1142         * config/tc-hppa.c (last_label_symbol): Declare.
1143         (pa_get_label): Return last label in current space/segment or NULL.
1144         (pa_define_label): Record last label and add to root.
1145         (pa_undefine_label): Remove last label from root.
1146
1147 2015-06-08  Nick Clifton  <nickc@redhat.com>
1148
1149         * config/tc-rx.c (rx_op): Correct handling of integer bignums.
1150
1151 2015-06-04  Matthew Wahab  <matthew.wahab@arm.com>
1152
1153         * NEWS: Mention ARMv8.1 support in the Aarch64 port.
1154         * config/tc-aarch64.c (aarch64_arch_option_table): Add "armv8.1-a".
1155         * doc/c-aarch64.texi (-march): Add "armv8.1-a".
1156
1157 2015-06-04  Renlin Li  <renlin.li@arm.com>
1158
1159         * config/tc-arm.c (arm_init_frag): Use frag's thumb_mode information
1160         when available.
1161
1162 2015-06-04  Nick Clifton  <nickc@redhat.com>
1163
1164         * config/tc-h8300.c (md_section_align): Fix compile time warning
1165         about left shifting a negative value.
1166
1167 2015-06-03  Matthew Wahab  <matthew.wahab@arm.com>
1168
1169         * config/tc-arm.c (arm_archs): Add "armv8.1-a".
1170         * doc/c-arm.texi (ARM Options, -march): Add "armv8.1-a".
1171         * NEWS: Mention ARMv8.1 support.
1172
1173 2015-06-02  Matthew Wahab  <matthew.wahab@arm.com>
1174
1175         * config/tc-arm.c (arm_ext_pan): New.
1176         (do_setpan): New, encode an ARM SETPAN instruction.
1177         (do_t_setpan): New, encode a Thumb SETPAN instruction.
1178         (insns): Add "setpan".
1179         (arm_extensions): Add "pan".
1180         * doc/c-arm.texi (ARM Options): Add "pan" to list of -mcpu processor
1181         extensions.
1182
1183 2015-06-02  Matthew Wahab  <matthew.wahab@arm.com>
1184
1185         * config/tc-aarch64.c (aarch64_features): Add "rdma".
1186         * doc/c-aarch64.texi (AArch64 Extensions): Add "rdma".
1187
1188 2015-06-02  Matthew Wahab  <matthew.wahab@arm.com>
1189
1190         * config/tc-aarch64.c (aarch64_features): Add "lor".
1191         * doc/c-aarch64.c (Aarch64 Extensions): Add "lor" to list of
1192         architecture extensions.
1193
1194 2015-06-01  Matthew Wahab  <matthew.wahab@arm.com>
1195
1196         * config/tc-aarch64.c (parse_sys_reg): New parameter.  Check target
1197         support.  Fix whitespace.
1198         (parse_operands): Update for parse_sys_reg changes.
1199         (aarch64_features): Add "pan".
1200         * doc/c-aarch64.texi (Aarch64 Extensions): Add "pan".
1201
1202 2015-06-01  Jiong Wang  <jiong.wang@arm.com>
1203
1204         * config/tc-aarch64.c (reloc_table): New relocation modifiers.
1205         (md_apply_fix): Support BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14.
1206         (aarch64_force_relocation): Ditto.
1207
1208 2015-06-01  Jiong Wang  <jiong.wang@arm.com>
1209
1210         * config/tc-aarch64.c (reloc_table): New relocation modifiers.
1211         (md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15.
1212         (aarch64_force_relocation): Ditto.
1213
1214 2015-05-28  Catherine Moore  <clm@codesourcery.com>
1215             Bernd Schmidt <bernds@codesourcery.com>
1216             Paul Brook <paul@codesourcery.com>
1217
1218         * config/tc-alpha.c (all_cfi_sections): Declare.
1219         (s_alpha_ent): Initialize all_cfi_sections.
1220         (alpha_elf_md_end): Invoke cfi_set_sections.
1221         * config/tc-mips.c (md_apply_fix):  Handle BFD_RELOC_NONE.
1222         (s_ehword): Use BFD_RELOC_32_PCREL.
1223         (mips_fix_adjustable): Handle BFD_RELOC_32_PCREL.
1224         (mips_cfi_reloc_for_encoding): New function.
1225         * tc-mips.h (DWARF2_FDE_RELOC_SIZE): Redefine.
1226         (DWARF2_FDE_RELOC_ENCODING): Define.
1227         (tc_cfi_reloc_for_encoding): Define.
1228         (mips_cfi_reloc_for_encoding): Define.
1229         (tc_compact_eh_opcode_stop): Define.
1230         (tc_compact_eh_opcode_pad): Define.
1231         * doc/as.texinfo: Document Compact EH extensions.
1232         * doc/internals.texi: Likewise.
1233         * dw2gencfi.c (EH_FRAME_LINKONCE): Redefine.
1234         (tc_cfi_reloc_for_encoding): Provide default.
1235         (compact_eh): Declare.
1236         (emit_expr_encoded): New function.
1237         (get_debugseg_name): Add Compact EH support.
1238         (alloc_debugseg_item): Likewise.
1239         (cfi_set_sections): New function.
1240         (dot_cfi_fde_data): New function.
1241         (dot_cfi_personality_id): New function.
1242         (dot_cfi_inline_lsda): New function.
1243         (cfi_pseudo_table): Add cfi_fde_data, cfi_personality_id,
1244         and cfi_inline_lsda.
1245         (dot_cfi_personality): Add Compact EH support.
1246         (dot_cfi_lsda): Likewise.
1247         (dot_cfi_sections): Likewise.
1248         (dot_cfi_startproc): Likewise.
1249         (get_cfi_seg): Likewise.
1250         (output_compact_unwind_data): New function.
1251         (output_cfi_insn): Add Compact EH support.
1252         (output_cie): Likewise.
1253         (output_fde): Likewise.
1254         (cfi_finish): Likewise.
1255         (cfi_emit_eh_header): New function.
1256         (output_eh_header): New function.
1257         * dw2gencfi.h (cfi_set_sections): Declare.
1258         (SUPPORT_COMPACT_EH): Define.
1259         (MULTIPLE_FRAME_SECTIONS): Define.
1260         New enumeration to describe the Compact EH header format.
1261         (fde_entry): Add new fields personality_id, eh_header_type, eh_data_size,
1262         eh_data, eh_loc and sections.
1263         (CFI_EMIT_eh_frame, CFI_EMIT_debug_frame, CFI_EMIT_target,
1264         CFI_EMIT_eh_frame_compact): Define.
1265
1266 2015-05-26  Max Filippov  <jcmvbkbc@gmail.com>
1267
1268         * config/tc-xtensa.c (xtensa_move_literals): Check that
1269         search_frag is non-NULL. Report error if literal frag is not
1270         found.
1271
1272 2015-05-22  Nick Clifton  <nickc@redhat.com>
1273
1274         PR gas/18446
1275         * read.c (output_big_sleb128): Use U suffix to prevent compile
1276         time warning.
1277
1278 2015-05-19  Jiong Wang  <jiong.wang@arm.com>
1279
1280         * config/tc-aarch64.c (process_movw_reloc_info): Sort relocation case
1281         labels alphabetically.
1282         (md_apply_fix): Ditto.
1283         (aarch64_force_relocation): Ditto.
1284
1285 2015-05-15  H.J. Lu  <hongjiu.lu@intel.com>
1286
1287         PR binutis/18386
1288         * config/tc-i386.c (OPTION_MAMD64): New.
1289         (OPTION_MINTEL64): Likewise.
1290         (md_longopts): Add -mamd64 and -mintel64.
1291         (md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
1292         (md_show_usage): Add -mamd64 and -mintel64.
1293         * doc/c-i386.texi: Document -mamd64 and -mintel64.
1294
1295 2015-05-15  H.J. Lu  <hongjiu.lu@intel.com>
1296
1297         * config/tc-i386.c (shared): New.
1298         (OPTION_MSHARED): Likewise.
1299         (elf_symbol_resolved_in_segment_p): Add relocation argument.
1300         Check PLT relocations and shared.
1301         (md_estimate_size_before_relax): Pass fragP->fr_var to
1302         elf_symbol_resolved_in_segment_p.
1303         (md_longopts): Add -mshared.
1304         (md_show_usage): Likewise.
1305         (md_parse_option): Handle OPTION_MSHARED.
1306         * doc/c-i386.texi: Document -mshared.
1307
1308 2015-05-14  H.J. Lu  <hongjiu.lu@intel.com>
1309
1310         * write.c (compress_debug): Don't write the zlib header, which
1311         is handled by bfd_update_compression_header.
1312
1313 2015-05-13  Max Filippov  <jcmvbkbc@gmail.com>
1314
1315         * config/tc-xtensa.c (xtensa_relax_frag): Allow trampoline to be
1316         closer than J_RANGE / 2 to jump frag.
1317
1318 2015-05-11  H.J. Lu  <hongjiu.lu@intel.com>
1319
1320         * configure.tgt (arch): Set to iamcu for i386-*-elfiamcu target.
1321         * config/tc-i386.c (i386_mach): Support iamcu.
1322         (i386_target_format): Likewise.
1323
1324 2015-05-11  H.J. Lu  <hongjiu.lu@intel.com>
1325
1326         * config/tc-i386.c (cpu_arch): Add iamcu.
1327         (i386_align_code): Handle PROCESSOR_IAMCU.
1328         (i386_arch): Likewise.
1329         (i386_mach): Likewise.
1330         (i386_target_format): Likewise.
1331         (valid_iamcu_cpu_flags): New function.
1332         (check_cpu_arch_compatible): Only allow Intel MCU instructions
1333         when targeting Intel MCU.
1334         (set_cpu_arch): Call valid_iamcu_cpu_flags to check if CPU flags
1335         are valid for Intel MCU.
1336         (md_parse_option): Likewise.
1337         * tc-i386.h (ELF_TARGET_IAMCU_FORMAT): New.
1338         (processor_type): Add PROCESSOR_IAMCU.
1339         * doc/c-i386.texi: Document iamcu.
1340
1341 2015-05-08  Nick Clifton  <nickc@redhat.com>
1342
1343         PR gas/18347
1344         * config/tc-arm.h (TC_EQUAL_IN_INSN): Define.
1345         * config/tc-arm.c (arm_tc_equal_in_insn): New function.  Move
1346         the symbol name checking code to here from...
1347         (md_undefined_symbo): ... here.
1348
1349 2015-05-07  H.J. Lu  <hongjiu.lu@intel.com>
1350
1351         * config/tc-i386.c (elf_symbol_resolved_in_segment_p): New.
1352         (md_estimate_size_before_relax): Use it.
1353
1354 2015-05-06  Jose E. Marchesi  <jose.marchesi@oracle.com>
1355
1356         * config/tc-sparc.c: Typo in comment fixed.
1357
1358 2015-05-06  Jose E. Marchesi  <jose.marchesi@oracle.com>
1359
1360         * config/tc-sparc.c (sparc_ip): Support the %ncc "natural"
1361         condition codes
1362         * doc/c-sparc.texi (Sparc-Regs): Document %ncc.
1363
1364 2015-05-06  Nick Clifton  <nickc@redhat.com>
1365
1366         * doc/as.texinfo (Dollar Local Labels): Note that these are only
1367         supported on some targets.
1368
1369 2015-05-06  Renlin Li  <renlin.li@arm.com>
1370
1371         * config/tc-aarch64.c (mapping_state): Recording alignment before exit.
1372
1373 2015-05-05  Renlin Li  <renlin.li@arm.com>
1374
1375         * config/tc-aarch64.c (aarch64_init_frag): Always generate mapping
1376         symbols.
1377
1378 2015-05-05  Nick Clifton  <nickc@redhat.com>
1379
1380         * config/tc-msp430.c (MAX_OP_LEN): Increase to 4096.
1381         (msp430_make_init_symbols): New function.
1382         (msp430_section): Call it.
1383         (msp430_frob_section): Likewise.
1384
1385 2015-05-02  Max Filippov  <jcmvbkbc@gmail.com>
1386
1387         * config/tc-xtensa.c (cached_fixupS, fixup_cacheS): New typedefs.
1388         (struct cached_fixup, struct fixup_cache): New structures.
1389         (fixup_order, xtensa_make_cached_fixup),
1390         (xtensa_realloc_fixup_cache, xtensa_cache_relaxable_fixups),
1391         (xtensa_find_first_cached_fixup, xtensa_delete_cached_fixup),
1392         (xtensa_add_cached_fixup): New functions.
1393         (xtensa_relax_frag): Cache fixups pointing at potentially
1394         oversized jumps at the beginning of every relaxation pass. Only
1395         check subset of this cache in the reach of single jump from the
1396         trampoline frag currently being relaxed.
1397
1398 2015-05-01  Nick Clifton  <nickc@redhat.com>
1399
1400         * config/rl78-parse.y (MULU): Remove ISA_G14.
1401         (MULH, DIVHU, DIVWU, MACHI, MACH): Update error strings.
1402
1403 2015-05-01  H.J. Lu  <hongjiu.lu@intel.com>
1404
1405         * config/tc-i386.c (i386_elf_emit_arch_note): Removed.
1406         * config/tc-i386.h (md_end): Likewise.
1407         (i386_elf_emit_arch_note): Likewise.
1408
1409 2015-05-01  H.J. Lu  <hongjiu.lu@intel.com>
1410
1411         * configure.tgt: Support i386-*-elf*.
1412
1413 2015-04-30  DJ Delorie  <dj@redhat.com>
1414
1415         * config/rl78-defs.h (rl78_isa_g10): New.
1416         (rl78_isa_g13): New.
1417         (rl78_isa_g14): New.
1418         * config/rl78-parse.y (ISA_G10): New.
1419         (ISA_G13): New.
1420         (ISA_G14): New.
1421         (MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them.
1422         * config/tc-rl78.c (rl78_isa_g10): New.
1423         (rl78_isa_g13): New.
1424         (rl78_isa_g14): New.
1425
1426 2015-04-30  H.J. Lu  <hongjiu.lu@intel.com>
1427
1428         * config/tc-i386.c (i386_target_format): Use "else if" on
1429         cpu_arch_isa.
1430
1431 2015-04-30  Nick Clifton  <nickc@redhat.com>
1432
1433         PR gas/18347
1434         * config/tc-arm.c (md_undefined_symbol): Issue a warning message
1435         (if enabled) when the user creates a symbol with the same name as
1436         an ARM instruction.
1437         (flag_warn_syms): New static variable.
1438         (arm_opts): Add mwarn-syms and mno-warn-syms.
1439         * doc/c-arm.texi (ARM Options): Document the -m[no-]warn-syms
1440         options.
1441
1442         PR gas/18353
1443         * doc/as.texinfo (Zero): Add documentation of the .zero pseudo-op.
1444
1445 2015-04-29  Nick Clifton  <nickc@redhat.com>
1446
1447         PR 18256
1448         * config/tc-arm.c (encode_arm_cp_address): Issue an error message
1449         if the operand is neither a register nor a vector.
1450
1451 2015-04-29  Nick Clifton  <nickc@redhat.com>
1452
1453         * doc/as.texinfo (Set): Note that a symbol cannot be set multiple
1454         times if the expression is not constant and the target uses linker
1455         relaxation.
1456
1457 2015-04-28  Renlin Li  <renlin.li@arm.com>
1458
1459         * config/tc-arm.c (arm_init_frag): Always emit mapping symbols.
1460
1461 2015-04-28  Nick Clifton  <nickc@redhat.com>
1462
1463         PR 18313
1464         * cond.c (s_if): Stop compile time warning about stopc being used
1465         before it is set.
1466         (s_ifc): Likewise.
1467
1468 2015-04-27  Renlin Li  <renlin.li@arm.com>
1469
1470         * config/tc-aarch64.c (s_aarch64_inst): Don't align code for non-text
1471         section.
1472         (md_assemble): Likewise, move the align code outside the loop.
1473
1474 2015-04-24  Jim Wilson  <jim.wilson@linaro.org>
1475
1476         * config/tc-aarch64.c (aarch64_cpus): Add CRC and CRYPTO features
1477         for thunderx.
1478
1479 2015-04-24  Richard Earnshaw  <rearnsha@arm.com>
1480
1481         * config/tc-arm.h (arm_min): New function.
1482         (SUB_SEGMENT_ALIGN): Define.
1483
1484 2015-04-23  Matthew Fortune  <matthew.fortune@imgtec.com>
1485
1486         * config/tc-mips.c (macro): State the recommended way of creating
1487         32-bit or 64-bit addresses.
1488
1489 2015-04-23  Jan Beulich  <jbeulich@suse.com>
1490
1491         * config/tc-i386.c (match_mem_size): Also allow no size
1492         specification when broadcasting.
1493
1494 2015-04-20  H.J. Lu  <hongjiu.lu@intel.com>
1495
1496         * doc/as.texinfo (Bundle directives): Shorten menu entry and
1497         use @subsection.
1498         (CFI directives): Use @subsection.
1499         (SH-Dependent, SH64-Dependent): Moved after SCORE-Dependent.
1500         * doc/c-i386.texi (i386-Mnemonics): Use @subsection.
1501
1502 2015-04-17  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
1503
1504         * config/tc-avr.c (create_record_for_frag): Rename link to
1505         prop_rec_link.
1506
1507 2015-04-15  H.J. Lu  <hongjiu.lu@intel.com>
1508
1509         * NEWS: Mention
1510         --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi].
1511
1512 2015-04-14  H.J. Lu  <hongjiu.lu@intel.com>
1513
1514         * as.h (compressed_debug_section_type): Removed.
1515
1516 2015-04-14  Nick Clifton  <nickc@redhat.com>
1517
1518         * config/tc-rl78.h (TC_LINKRELAX_FIXUP): Define.
1519         (TC_FORCE_RELOCATION_SUB_SAME): Define.
1520         (DWARF2_USE_FIXED_ADVANCE_PC): Define.
1521
1522 2015-04-10  Nick Clifton  <nickc@redhat.com>
1523
1524         PR binutils/18198
1525         * doc/c-arm.texi (ARM Options): Add a note about the interaction of
1526         the -EB option with the linker's --be8 option.
1527
1528 2015-04-09  Hans-Peter Nilsson  <hp@axis.com>
1529
1530         * doc/c-rx.texi: Fix markup typos in last change.
1531
1532 2015-04-09  Nick Clifton  <nickc@redhat.com>
1533
1534         * config/tc-rx.c (enum options): Add OPTION_DISALLOW_STRING_INSNS.
1535         (md_longopts): Add -mno-allow-string-insns.
1536         (md_parse_option): Handle -mno-allow-string-insns.
1537         (md_show_usage): Mention -mno-allow-string-insns.
1538         (rx_note_string_insn_use): New function.  Produces an error
1539         message if a string insn is used when it is not allowed.
1540         * config/rx-parse.y (SCMPU): Call rx_note_string_insn_use.
1541         (SMOVU, SMOVB, SMOVF, SUNTIL, SWHILE, RMPA): Likewise.
1542         * config/rx-defs.h (rx_note_string_insn_use): Prototype.
1543         * doc/c-rx.texi: Document -mno-allow-string-insns.
1544
1545 2015-04-08  H.J. Lu  <hongjiu.lu@intel.com>
1546
1547         * as.c (show_usage): Update --compress-debug-sections.
1548         (std_longopts): Use optional_argument on compress-debug-sections.
1549         (parse_args): Handle
1550         --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
1551         * as.h (compressed_debug_section_type): New.
1552         (flag_compress_debug): Change type to compressed_debug_section_type.
1553         --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
1554         * write.c (compress_debug): Set BFD_COMPRESS_GABI for
1555         --compress-debug-sections=zlib-gabi.  Call
1556         bfd_get_compression_header_size to get compression header size.
1557         Don't rename section name for --compress-debug-sections=zlib-gabi.
1558         * config/tc-i386.c (compressed_debug_section_type): Set to
1559         COMPRESS_DEBUG_ZLIB.
1560         * doc/as.texinfo: Document
1561         --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
1562
1563 2015-04-07  Renlin Li  <renlin.li@arm.com>
1564
1565         * config/tc-aarch64.c (mapping_state): Use subseg_text_p.
1566         (s_aarch64_inst): Likewise.
1567         (md_assemble): Likewise.
1568
1569 2015-04-06  H.J. Lu  <hongjiu.lu@intel.com>
1570
1571         * write.c (compress_debug): Use bfd_putb64 to write uncompressed
1572         section size.
1573
1574 2015-04-05  H.J. Lu  <hongjiu.lu@intel.com>
1575
1576         * write.c (compress_debug): Don't write the zlib header if
1577         compressed section size is the same as before compression.
1578
1579 2015-04-02  Nick Clifton  <nickc@redhat.com>
1580
1581         PR gas/18189
1582         * config/tc-microblaze.c (parse_imm): Use offsetT as the type for
1583         min and max parameters.  Sign extend values before testing.
1584
1585 2015-04-02  Renlin Li  <renlin.li@arm.com>
1586
1587         * config/tc-aarch64.c (mapping_state): Emit MAP_DATA within text section in order.
1588         (mapping_state_2): Don't emit MAP_DATA here.
1589         (s_aarch64_inst): Align frag during state transition.
1590         (md_assemble): Likewise.
1591
1592 2015-04-02  Ed Maste  <emaste@freebsd.org>
1593
1594         * config/tc-aarch64.c (set_error_kind): Delete.
1595         (set_error_message): Delete.
1596
1597 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
1598
1599         * configure: Regenerated.
1600
1601 2015-04-01  Evandro Menezes  <e.menezes@samsung.com>
1602
1603         * config/tc-aarch64.c: Add support for Samsung Exynos M1.
1604         * doc/c-aarch64.texi (-mcpu=): Add "exynos-m1".
1605
1606 2015-04-01  Evandro Menezes  <e.menezes@samsung.com>
1607
1608         * config/tc-arm.c: Add support for Samsung Exynos M1.
1609         * doc/c-arm.texi (-mcpu=): Add "exynos-m1".
1610
1611 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
1612
1613         * configure: Regenerated.
1614
1615 2015-03-31  Ed Schouten  <ed@nuxi.nl>
1616
1617         * configure.tgt (fmt): Set to elf for *-*-cloudabi*.
1618
1619 2015-03-31  H.J. Lu  <hongjiu.lu@intel.com>
1620
1621         * configure.ac: Revert the AM_ZLIB change.
1622         * Makefile.in: Regenerated.
1623         * aclocal.m4: Likewise.
1624         * configure: Likewise.
1625
1626 2015-03-31  H.J. Lu  <hongjiu.lu@intel.com>
1627
1628         * Makefile.am (ZLIBINC): New.
1629         (AM_CFLAGS): Add $(ZLIBINC).
1630         * as.c: (show_usage): Don't check HAVE_ZLIB_H.
1631         (parse_args): Likewise.
1632         * compress-debug.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
1633         (compress_init): Don't check HAVE_ZLIB_H.
1634         (compress_data): Likewise.
1635         (compress_finish): Likewise.
1636         * configure.ac (AM_ZLIB): Removed.
1637         (zlibinc): New.  AC_SUBST.
1638         Add --with-system-zlib.
1639         * Makefile.in: Regenerated.
1640         * config.in: Likewise.
1641         * configure: Likewise.
1642         * doc/Makefile.in: Likewise.
1643
1644 2015-03-27  H.J. Lu  <hongjiu.lu@intel.com>
1645
1646         * config/tc-i386.c (cpu_flags_set): Removed.
1647
1648 2015-03-25  Renlin Li  <renlin.li@arm.com>
1649
1650         * config/tc-aarch64.c (mapping_state): Remove first MAP_DATA emitting
1651         code.
1652         (mapping_state_2): Emit first MAP_DATA symbol here.
1653
1654 2015-03-24  H.J. Lu  <hongjiu.lu@intel.com>
1655
1656         PR gas/18087
1657         * write.c (compress_debug): Don't write the zlib header if
1658         compression didn't make the section smaller.
1659
1660 2015-03-24  Terry Guo  <terry.guo@arm.com>
1661
1662         * config/tc-arm.c (no_cpu_selected): Use new macro to compare
1663         features.
1664         (parse_psr): Likewise.
1665         (do_t_mrs): Likewise.
1666         (do_t_msr): Likewise.
1667         (static const arm_feature_set arm_ext_*): Defined with new macros.
1668         (static const arm_feature_set arm_cext_*): Likewise.
1669         (static const arm_feature_set fpu_fpa_ext_*): Likewise.
1670         (static const arm_feature_set fpu_vfp_ext_*): Likewise.
1671         (deprecated_coproc_regs): Likewise.
1672         (UL_BARRIER): Likewise.
1673         (barrier_opt_names): Likewise.
1674         (arm_cpus): Likewise.
1675         (arm_extensions): Likewise.
1676
1677 2015-03-20  H.J. Lu  <hongjiu.lu@intel.com>
1678
1679         * config/tc-i386.c (i386_align_code): Limit multi-byte nop
1680         instructions to 10 bytes.
1681
1682 2015-03-19  Nick Clifton  <nickc@redhat.com>
1683
1684         * config/tc-rl78.c (enum options): Add G13 and G14.
1685         (md_longopts): Add -mg13 and -mg14.
1686         (md_parse_option): Handle -mg13 and -mg14.
1687         (md_show_usage): List -mg13 and -mg14.
1688         * doc/c-rl78.texi: Add description of -mg13 and -mg14 options.
1689
1690 2015-03-18  Jon Turney  <jon.turney@dronecode.org.uk>
1691             Nick Clifton  <nickc@redhat.com>
1692
1693         PR binutils/18087
1694         * doc/as.texinfo: Note that when gas compresses debug sections the
1695         compression is only performed if it makes the section smaller.
1696         * write.c (compress_debug): Do not compress a debug section if
1697         doing so would make it larger.
1698
1699 2015-03-17  Ganesh Gopalasubramanian  <Ganesh.Gopalasubramanian@amd.com>
1700
1701         * config/tc-i386.c (cpu_arch): Add PROCESSOR_ZNVER flags.
1702         (i386_align_code): Add PROCESSOR_ZNVER cases.
1703         * config/tc-i386.h (processor_type): Add PROCESSOR_ZNVER.
1704         * doc/c-i386.texi: Add znver1 and clzero.
1705
1706 2015-03-16  Nick Clifton  <nickc@redhat.com>
1707
1708         * dwarf2dbg.c (out_header): Remove spurious #if 1.
1709
1710 2015-03-13  Jiong Wang  <jiong.wang@arm.com>
1711
1712         * config/tc-aarch64.c (warn_unpredictable_ldst): Don't warn on reg
1713         number 31.
1714
1715 2015-03-13  Jiong Wang  <jiong.wang@arm.com>
1716
1717         * config/tc-aarch64.h (SUB_SEGMENT_ALIGN): Define to be zero.
1718
1719 2015-03-12  Andrew Bennett  <andrew.bennett@imgtec.com>
1720
1721         * config/tc-mips.c (mips_cpu_info_table): Add i6400 entry.
1722         * doc/c-mips.texi: Document i6400 -march option.
1723
1724 2015-03-12  Nick Clifton  <nickc@redhat.com>
1725
1726         PR gas/17444
1727         * config/tc-arm.h (MD_APPLY_SYM_VALUE): Pass the current segment
1728         to arm_apply_sym_value.  Update prototype.
1729         * config/tc-arm.c (arm_apply_sym_value): Add segment argument.
1730         Do not apply the value if the symbol is in a different segment to
1731         the current segment.
1732
1733 2015-03-11  Alan Modra  <amodra@gmail.com>
1734
1735         * config/tc-ppc.c (md_assemble): Don't abort on 8 byte insn fixups.
1736         (md_apply_fix): Report an error on data-only fixups used with insns.
1737
1738 2015-03-10  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>
1739
1740         * config/tc-s390.c (md_gather_operands): Check for valid
1741         length field operands.
1742
1743 2015-03-10  Michael Perkins  <perkinsmg75@yahoo.co.uk>
1744
1745         * config/tc-arm.c (parse_operands): Fix bug setting writeback
1746         values for '^' on OP_REGLSTs.
1747         (do_push_pop): Add new writeback constraint.
1748
1749 2015-03-10  Renlin Li  <renlin.li@arm.com>
1750
1751         * config/tc-arm.c (mapping_state): Remove first MAP_DATA emitting code.
1752         (mapping_state_2): Emit first MAP_DATA symbol here.
1753
1754 2015-03-10  Matthew Wahab  <matthew.wahab@arm.com>
1755
1756         * config/tc-aarch64.c (mapping_state): Set minimum alignment for
1757         code sections.
1758
1759 2015-03-10  Nick Clifton  <nickc@redhat.com>
1760
1761         PR gas/17852
1762         * config/tc-arm.c (md_begin): Ensure that selected_cpu is
1763         initialised when CPU_DEFAULT is defined.
1764
1765 2015-03-05  Nick Clifton  <nickc@redhat.com>
1766
1767         * config/tc-v850.c (md_parse_option): Fix code to set or clear
1768         EF_RH850_DATA_ALIGN8 bit in ELF header, based upon the use of the
1769         -m8byte-align and -m4byte-align command line options.
1770
1771 2015-03-04  Richard Sandiford  <richard.sandiford@arm.com>
1772
1773         PR gas/17843
1774         * config/tc-aarch64.c (process_movw_reloc_info): Allow
1775         R_AARCH64_TLSLE_MOVW_TPREL_G0_NC and R_AARCH64_TLSLE_MOVW_TPREL_G1_NC
1776         for MOVK.
1777
1778 2015-02-28  Alan Modra  <amodra@gmail.com>
1779
1780         * write.c (SUB_SEGMENT_ALIGN): Don't pad non-code sections at
1781         end to their alignment.
1782
1783 2015-02-19  Marcus Shawcroft  <marcus.shawcroft@arm.com>
1784
1785         * config/tc-aarch64.c (reloc_table_entry): Generate
1786         BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21.
1787         (md_apply_fix, aarch64_force_relocation): Handle
1788         BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
1789
1790 2015-02-19  Marcus Shawcroft  <marcus.shawcroft@arm.com>
1791
1792         * config/tc-aarch64.c (reloc_table_entry): Generate
1793         BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
1794         (md_apply_fix, aarch64_force_relocation): Handle
1795         BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
1796
1797 2015-02-19  Marcus Shawcroft  <marcus.shawcroft@arm.com>
1798
1799         * config/tc-aarch64.c (reloc_table_entry): Generate
1800         BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
1801         (md_apply_fix, aarch64_force_relocation): Handle
1802         BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
1803
1804 2015-02-26  Marcus Shawcroft  <marcus.shawcroft@arm.com>
1805
1806         * config/tc-aarch64.c (reloc_table_entry): Add ld_literal_type.
1807         (reloc_table): Likewise.
1808         (parse_address_main): Use ld_literal_type.
1809
1810 2015-02-26  Marcus Shawcroft  <marcus.shawcroft@arm.com>
1811
1812         * config/tc-aarch64.c (reloc_table_entry): Add adr_type.
1813         (reloc_table): Likewise.
1814         (parse_address_main): Use adr_type.
1815
1816 2015-02-26  Marcus Shawcroft  <marcus.shawcroft@arm.com>
1817
1818         * config/tc-aarch64.c (aarch64_arch_any, aarch64_arch_node): Remove.
1819
1820 2015-02-25  Andrew Burgess  <andrew.burgess@embecosm.com>
1821
1822         * config/tc-avr.c: Add elf32-avr.h include.
1823         (struct avr_property_record_link): New structure.
1824         (avr_output_property_section_header): New function.
1825         (avr_record_size): New function.
1826         (avr_output_property_record): New function.
1827         (avr_create_property_section): New function.
1828         (avr_handle_align): New function.
1829         (exclude_section_from_property_tables): New function.
1830         (create_record_for_frag): New function.
1831         (append_records_for_section): New function.
1832         (avr_create_and_fill_property_section): New function.
1833         (avr_post_relax_hook): New function.
1834         * config/tc-avr.h (md_post_relax_hook): Define.
1835         (avr_post_relax_hook): Declare.
1836         (HANDLE_ALIGN): Define.
1837         (avr_handle_align): Declare.
1838         (strut avr_frag_data): New structure.
1839         (TC_FRAG_TYPE): Define.
1840
1841 2015-02-25  Matthew Wahab  <matthew.wahab@arm.com>
1842
1843         * doc/c-arm.texi (-mcpu=): Add cortex-a53, cortex-a57 and
1844         cortex-a72.
1845
1846 2015-02-24  Nick Clifton  <nickc@redhat.com>
1847
1848         * config/tc-v850.c (soft_float): New variable.
1849         (v850_data_8): New variable.
1850         (md_show_usage): Add -msoft-float/-mhard-float.
1851         (md_parse_option): Likewise.
1852         (md_begin): Set the default value of soft_float.
1853         (v850_md_end): New function.  Creates a note section.
1854         * config/tc-v850.h (md_end): Define.
1855         * doc/c-v850.texi: Document -msoft-float/-mhard-float.
1856
1857 2015-02-23  Yoshinori Sato  <ysato@users.sourceforge.jp>
1858
1859         * config/tc-h8300.c (line_separater_chars): Add a version for
1860         h8300-linux that includes a separator.
1861         (default_mach): New variable.
1862         (md_main): Use it.
1863         (md_longopts): Add '--march' option.
1864         (md_parse_option): Parse the new option.
1865         * config/tc-h8300.h (TARGET_FORMAT): Add elf32-h8300-linux.
1866         * configure.tgt: Add h8300-*-linux
1867         * doc/c-h8300.texi: Document --march.
1868
1869 2015-02-23  Nick Clifton  <nickc@redhat.com>
1870
1871         PR 17940
1872         * dwarf2dbg.c (out_header): When generating dwarf sections use
1873         real symbols not temps for the start and end symbols.
1874         * config/tc-msp430.h (TC_FORCE_RELOCATION_SUB_SAME): Also prevent
1875         adjustments to relocations in debug sections.
1876         (TC_LINKRELAX_FIXUP): Likewise.
1877
1878 2015-02-19  Alan Modra  <amodra@gmail.com>
1879
1880         * doc/as.texinfo (Local Symbol Names): Don't use ':' in pxref.
1881         * doc/c-i386.texi: Reorder i386-Bugs after i386-Arch.
1882
1883 2015-02-11  Matthew Wahab  <matthew.wahab@arm.com>
1884
1885         * config/tc-aarch64.c (aarch64_cpus): Fix code formatting.
1886
1887 2015-02-11  Matthew Wahab  <matthew.wahab@arm.com>
1888
1889         * config/tc-arm.c: Add support for Cortex-A72.
1890
1891 2015-02-09  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
1892
1893         * config/tc-arm.c (warn_deprecated_sp): Use as_tsktsk instead
1894         of as_warn for deprecation messages.
1895         (encode_arm_addr_mode_2): Likewise.
1896         (check_obsolete): Likewise.
1897         (do_rd_rm_rn): Likewise.
1898         (do_co_reg): Likewise.
1899         (do_setend): Likewise.
1900         (do_t_mov_cmp): Likewise.
1901         (do_neon_ldr_str): Likewise.
1902         (opcode_lookup): Likewise.
1903         (if_fsm_post_encode): Likewise.
1904         (md_assemble): Likewise.
1905
1906 2015-02-06  Jan Beulich  <jbeulich@suse.com>
1907
1908         * dw2gencfi.c (select_cie_for_fde): Also bail on CFI_label.
1909         (cfi_change_reg_numbers): Also do nothing for CFI_label.
1910         (cfi_pseudo_table): Also handle .cfi_label when not supporting
1911         CFI directives.
1912
1913 2015-02-05  Alan Modra  <amodra@gmail.com>
1914
1915         * config/tc-msp430.c (md_assemble): Correct size passed to
1916         extract_cmd.  Remove index check.
1917
1918 2015-02-04  Matthew Wahab  <matthew.wahab@arm.com>
1919
1920         * config/tc-aarch64.c (aarch64_cpus): Add support for Cortex-A72.
1921         * doc/c-aarch64.texi (-mcpu=): Add "cortex-a72".
1922
1923 2015-02-04  Nick Clifton  <nickc@redhat.com>
1924
1925         * config/rl78-parse.y (addsubw): Fix encoding of [HL] variant of
1926         these instructions.
1927
1928 2015-02-03  Renlin Li  <renlin.li@arm.com>
1929
1930         * doc/c-aarch64.texi (.arch): Document the directive.
1931         (.arch_extension): Likewise.
1932
1933 2015-02-03  Nick Clifton  <nickc@redhat.com>
1934
1935         * config/tc-rl78.h (TC_PARSE_CONS_EXPRESSION): Define.
1936
1937 2015-01-28  James Bowman  <james.bowman@ftdichip.com>
1938
1939         * Makefile.am: Add FT32 files.
1940         * config/tc-ft32.c: New file.
1941         * config/tc-ft32.h: New file.
1942         * configure.tgt: Add FT32 support.
1943         * Makefile.in: Regenerate.
1944         * po/POTFILES.in: Regenerate.
1945
1946 2015-01-27  Kuan-Lin Chen  <kuanlinchentw@gmail.com>
1947
1948         * config/tc-nds32.c (do_pseudo_la_internal): Limit the second argument
1949         of instruction la to a symbol.
1950
1951 2015-01-27  Kuan-Lin Chen  <kuanlinchentw@gmail.com>
1952
1953         * config/tc-nds32.c (nds32_parse_name): Ignore when the input is
1954         section name.
1955
1956 2015-01-19  Alan Modra  <amodra@gmail.com>
1957
1958         * read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}.
1959         * write.c (get_frag_for_reloc): Allow match just past end of frag.
1960
1961 2015-01-16  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>
1962
1963         * config/tc-s390.c (struct pd_reg): Remove.
1964         (pre_defined_registers): Remove.
1965         (REG_NAME_CNT): Remove.
1966         (reg_name_search): Calculate the register number instead of doing
1967         a lookup.
1968         (register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
1969         reg_name_search signature.
1970         (s390_parse_cpu): Support the new arch string z13.
1971         (s390_insert_operand): Support for vector registers with the extra
1972         field for the fifth bit of each vector register operand.
1973         (md_gather_operand): Adjust to the new handling of optional
1974         parameters.
1975
1976         * doc/as.texinfo: Document the z13 cpu string.
1977
1978 2015-01-13  Matthew Wahab  <matthew.wahab@arm.com>
1979
1980         * config/tc-arm.c (parse_ifimm_zero): Accept #0x0 as a synonym for
1981         #0, restoring previous behaviour.
1982
1983 2015-01-12  Jan Beulich  <jbeulich@suse.com>
1984
1985         * dw2gencfi.c (cfi_add_label, dot_cfi_label): New.
1986         (cfi_pseudo_table): Add "cfi_label".
1987         (output_cfi_insn): Handle CFI_label.
1988         (select_cie_for_fde): Als terminate CIE when encountering
1989         CFI_label.
1990         * dw2gencfi.h (cfi_add_label): Declare.
1991         (struct cfi_insn_data): New member "sym_name".
1992         (CFI_label): New.
1993         * read.c (read_symbol_name): Drop "static".
1994         * read.h (read_symbol_name): Declare.
1995
1996 2015-01-12  Jan Beulich  <jbeulich@suse.com>
1997
1998         * config/tc-arm.c (do_neon_shl_imm): Check immediate range.
1999         (do_neon_qshl_imm): Likewise.
2000
2001 2015-01-12  Alan Modra  <amodra@gmail.com>
2002
2003         * read.c (s_altmacro, s_reloc): Make definition static.
2004
2005 2015-01-10  Andrew Burgess  <andrew.burgess@embecosm.com>
2006
2007         * config/tc-avr.c (md_apply_fix): Update the contents of VALP for
2008         diff fixups.
2009
2010 2015-01-09  Philipp Tomsich  <philipp.tomsich@theobroma-systems.com>
2011
2012         * config/tc-arm.c (arm_cpus): Add support for APM X-Gene 1 and
2013         X-Gene 2.
2014         * doc/c-arm.texi (ARM Options): Mention xgene1 and xgene2.
2015
2016 2015-01-07  Jan Beulich <jbeulich@suse.com>
2017
2018         * config/tc-arm.c (struct arm_option_extension_value_table):
2019         Split field "value" into fields "merge_value" and "clear_value".
2020         (arm_extensions): Adjust initializer accordingly.
2021
2022 2015-01-01  Alan Modra  <amodra@gmail.com>
2023
2024         * as.c (parse_args): Just print current year.
2025
2026 2015-01-01  Alan Modra  <amodra@gmail.com>
2027
2028         Update year range in copyright notice of all files.
2029
2030 For older changes see ChangeLog-2014
2031 \f
2032 Copyright (C) 2015 Free Software Foundation, Inc.
2033
2034 Copying and distribution of this file, with or without modification,
2035 are permitted in any medium without royalty provided the copyright
2036 notice and this notice are preserved.
2037
2038 Local Variables:
2039 mode: change-log
2040 left-margin: 8
2041 fill-column: 74
2042 version-control: never
2043 End: