1 /* tc-i386.c -- Assemble code for the Intel 80386
2 Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
3 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
4 Free Software Foundation, Inc.
6 This file is part of GAS, the GNU Assembler.
8 GAS is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 3, or (at your option)
13 GAS is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with GAS; see the file COPYING. If not, write to the Free
20 Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
23 /* Intel 80386 machine specific gas.
24 Written by Eliot Dresselhaus (eliot@mgm.mit.edu).
25 x86_64 support by Jan Hubicka (jh@suse.cz)
26 VIA PadLock support by Michal Ludvig (mludvig@suse.cz)
27 Bugs & suggestions are completely welcome. This is free software.
28 Please help us make it better. */
31 #include "safe-ctype.h"
33 #include "dwarf2dbg.h"
34 #include "dw2gencfi.h"
35 #include "elf/x86-64.h"
36 #include "opcodes/i386-init.h"
38 #ifndef REGISTER_WARNINGS
39 #define REGISTER_WARNINGS 1
42 #ifndef INFER_ADDR_PREFIX
43 #define INFER_ADDR_PREFIX 1
47 #define DEFAULT_ARCH "i386"
52 #define INLINE __inline__
58 /* Prefixes will be emitted in the order defined below.
59 WAIT_PREFIX must be the first prefix since FWAIT is really is an
60 instruction, and so must come before any prefixes.
61 The preferred prefix order is SEG_PREFIX, ADDR_PREFIX, DATA_PREFIX,
62 REP_PREFIX, LOCK_PREFIX. */
69 #define REX_PREFIX 6 /* must come last. */
70 #define MAX_PREFIXES 7 /* max prefixes per opcode */
72 /* we define the syntax here (modulo base,index,scale syntax) */
73 #define REGISTER_PREFIX '%'
74 #define IMMEDIATE_PREFIX '$'
75 #define ABSOLUTE_PREFIX '*'
77 /* these are the instruction mnemonic suffixes in AT&T syntax or
78 memory operand size in Intel syntax. */
79 #define WORD_MNEM_SUFFIX 'w'
80 #define BYTE_MNEM_SUFFIX 'b'
81 #define SHORT_MNEM_SUFFIX 's'
82 #define LONG_MNEM_SUFFIX 'l'
83 #define QWORD_MNEM_SUFFIX 'q'
84 #define XMMWORD_MNEM_SUFFIX 'x'
85 #define YMMWORD_MNEM_SUFFIX 'y'
86 /* Intel Syntax. Use a non-ascii letter since since it never appears
88 #define LONG_DOUBLE_MNEM_SUFFIX '\1'
90 #define END_OF_INSN '\0'
93 'templates' is for grouping together 'template' structures for opcodes
94 of the same name. This is only used for storing the insns in the grand
95 ole hash table of insns.
96 The templates themselves start at START and range up to (but not including)
101 const insn_template
*start
;
102 const insn_template
*end
;
106 /* 386 operand encoding bytes: see 386 book for details of this. */
109 unsigned int regmem
; /* codes register or memory operand */
110 unsigned int reg
; /* codes register operand (or extended opcode) */
111 unsigned int mode
; /* how to interpret regmem & reg */
115 /* x86-64 extension prefix. */
116 typedef int rex_byte
;
118 /* 386 opcode byte to code indirect addressing. */
127 /* x86 arch names, types and features */
130 const char *name
; /* arch name */
131 unsigned int len
; /* arch string length */
132 enum processor_type type
; /* arch type */
133 i386_cpu_flags flags
; /* cpu feature flags */
134 unsigned int skip
; /* show_arch should skip this. */
135 unsigned int negated
; /* turn off indicated flags. */
139 static void update_code_flag (int, int);
140 static void set_code_flag (int);
141 static void set_16bit_gcc_code_flag (int);
142 static void set_intel_syntax (int);
143 static void set_intel_mnemonic (int);
144 static void set_allow_index_reg (int);
145 static void set_sse_check (int);
146 static void set_cpu_arch (int);
148 static void pe_directive_secrel (int);
150 static void signed_cons (int);
151 static char *output_invalid (int c
);
152 static int i386_finalize_immediate (segT
, expressionS
*, i386_operand_type
,
154 static int i386_finalize_displacement (segT
, expressionS
*, i386_operand_type
,
156 static int i386_att_operand (char *);
157 static int i386_intel_operand (char *, int);
158 static int i386_intel_simplify (expressionS
*);
159 static int i386_intel_parse_name (const char *, expressionS
*);
160 static const reg_entry
*parse_register (char *, char **);
161 static char *parse_insn (char *, char *);
162 static char *parse_operands (char *, const char *);
163 static void swap_operands (void);
164 static void swap_2_operands (int, int);
165 static void optimize_imm (void);
166 static void optimize_disp (void);
167 static const insn_template
*match_template (void);
168 static int check_string (void);
169 static int process_suffix (void);
170 static int check_byte_reg (void);
171 static int check_long_reg (void);
172 static int check_qword_reg (void);
173 static int check_word_reg (void);
174 static int finalize_imm (void);
175 static int process_operands (void);
176 static const seg_entry
*build_modrm_byte (void);
177 static void output_insn (void);
178 static void output_imm (fragS
*, offsetT
);
179 static void output_disp (fragS
*, offsetT
);
181 static void s_bss (int);
183 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
184 static void handle_large_common (int small ATTRIBUTE_UNUSED
);
185 static void handle_quad (int);
188 static const char *default_arch
= DEFAULT_ARCH
;
193 /* VEX prefix is either 2 byte or 3 byte. */
194 unsigned char bytes
[3];
196 /* Destination or source register specifier. */
197 const reg_entry
*register_specifier
;
200 /* 'md_assemble ()' gathers together information and puts it into a
207 const reg_entry
*regs
;
212 operand_size_mismatch
,
213 operand_type_mismatch
,
214 register_type_mismatch
,
215 number_of_operands_mismatch
,
216 invalid_instruction_suffix
,
219 unsupported_with_intel_mnemonic
,
226 /* TM holds the template for the insn were currently assembling. */
229 /* SUFFIX holds the instruction size suffix for byte, word, dword
230 or qword, if given. */
233 /* OPERANDS gives the number of given operands. */
234 unsigned int operands
;
236 /* REG_OPERANDS, DISP_OPERANDS, MEM_OPERANDS, IMM_OPERANDS give the number
237 of given register, displacement, memory operands and immediate
239 unsigned int reg_operands
, disp_operands
, mem_operands
, imm_operands
;
241 /* TYPES [i] is the type (see above #defines) which tells us how to
242 use OP[i] for the corresponding operand. */
243 i386_operand_type types
[MAX_OPERANDS
];
245 /* Displacement expression, immediate expression, or register for each
247 union i386_op op
[MAX_OPERANDS
];
249 /* Flags for operands. */
250 unsigned int flags
[MAX_OPERANDS
];
251 #define Operand_PCrel 1
253 /* Relocation type for operand */
254 enum bfd_reloc_code_real reloc
[MAX_OPERANDS
];
256 /* BASE_REG, INDEX_REG, and LOG2_SCALE_FACTOR are used to encode
257 the base index byte below. */
258 const reg_entry
*base_reg
;
259 const reg_entry
*index_reg
;
260 unsigned int log2_scale_factor
;
262 /* SEG gives the seg_entries of this insn. They are zero unless
263 explicit segment overrides are given. */
264 const seg_entry
*seg
[2];
266 /* PREFIX holds all the given prefix opcodes (usually null).
267 PREFIXES is the number of prefix opcodes. */
268 unsigned int prefixes
;
269 unsigned char prefix
[MAX_PREFIXES
];
271 /* RM and SIB are the modrm byte and the sib byte where the
272 addressing modes of this insn are encoded. */
278 /* Swap operand in encoding. */
279 unsigned int swap_operand
;
281 /* Force 32bit displacement in encoding. */
282 unsigned int disp32_encoding
;
285 enum i386_error error
;
288 typedef struct _i386_insn i386_insn
;
290 /* List of chars besides those in app.c:symbol_chars that can start an
291 operand. Used to prevent the scrubber eating vital white-space. */
292 const char extra_symbol_chars
[] = "*%-(["
301 #if (defined (TE_I386AIX) \
302 || ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) \
303 && !defined (TE_GNU) \
304 && !defined (TE_LINUX) \
305 && !defined (TE_NETWARE) \
306 && !defined (TE_FreeBSD) \
307 && !defined (TE_DragonFly) \
308 && !defined (TE_NetBSD)))
309 /* This array holds the chars that always start a comment. If the
310 pre-processor is disabled, these aren't very useful. The option
311 --divide will remove '/' from this list. */
312 const char *i386_comment_chars
= "#/";
313 #define SVR4_COMMENT_CHARS 1
314 #define PREFIX_SEPARATOR '\\'
317 const char *i386_comment_chars
= "#";
318 #define PREFIX_SEPARATOR '/'
321 /* This array holds the chars that only start a comment at the beginning of
322 a line. If the line seems to have the form '# 123 filename'
323 .line and .file directives will appear in the pre-processed output.
324 Note that input_file.c hand checks for '#' at the beginning of the
325 first line of the input file. This is because the compiler outputs
326 #NO_APP at the beginning of its output.
327 Also note that comments started like this one will always work if
328 '/' isn't otherwise defined. */
329 const char line_comment_chars
[] = "#/";
331 const char line_separator_chars
[] = ";";
333 /* Chars that can be used to separate mant from exp in floating point
335 const char EXP_CHARS
[] = "eE";
337 /* Chars that mean this number is a floating point constant
340 const char FLT_CHARS
[] = "fFdDxX";
342 /* Tables for lexical analysis. */
343 static char mnemonic_chars
[256];
344 static char register_chars
[256];
345 static char operand_chars
[256];
346 static char identifier_chars
[256];
347 static char digit_chars
[256];
349 /* Lexical macros. */
350 #define is_mnemonic_char(x) (mnemonic_chars[(unsigned char) x])
351 #define is_operand_char(x) (operand_chars[(unsigned char) x])
352 #define is_register_char(x) (register_chars[(unsigned char) x])
353 #define is_space_char(x) ((x) == ' ')
354 #define is_identifier_char(x) (identifier_chars[(unsigned char) x])
355 #define is_digit_char(x) (digit_chars[(unsigned char) x])
357 /* All non-digit non-letter characters that may occur in an operand. */
358 static char operand_special_chars
[] = "%$-+(,)*._~/<>|&^!:[@]";
360 /* md_assemble() always leaves the strings it's passed unaltered. To
361 effect this we maintain a stack of saved characters that we've smashed
362 with '\0's (indicating end of strings for various sub-fields of the
363 assembler instruction). */
364 static char save_stack
[32];
365 static char *save_stack_p
;
366 #define END_STRING_AND_SAVE(s) \
367 do { *save_stack_p++ = *(s); *(s) = '\0'; } while (0)
368 #define RESTORE_END_STRING(s) \
369 do { *(s) = *--save_stack_p; } while (0)
371 /* The instruction we're assembling. */
374 /* Possible templates for current insn. */
375 static const templates
*current_templates
;
377 /* Per instruction expressionS buffers: max displacements & immediates. */
378 static expressionS disp_expressions
[MAX_MEMORY_OPERANDS
];
379 static expressionS im_expressions
[MAX_IMMEDIATE_OPERANDS
];
381 /* Current operand we are working on. */
382 static int this_operand
= -1;
384 /* We support four different modes. FLAG_CODE variable is used to distinguish
392 static enum flag_code flag_code
;
393 static unsigned int object_64bit
;
394 static unsigned int disallow_64bit_reloc
;
395 static int use_rela_relocations
= 0;
397 #if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
398 || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
399 || defined (TE_PE) || defined (TE_PEP) || defined (OBJ_MACH_O))
401 /* The ELF ABI to use. */
409 static enum x86_elf_abi x86_elf_abi
= I386_ABI
;
412 /* The names used to print error messages. */
413 static const char *flag_code_names
[] =
420 /* 1 for intel syntax,
422 static int intel_syntax
= 0;
424 /* 1 for intel mnemonic,
425 0 if att mnemonic. */
426 static int intel_mnemonic
= !SYSV386_COMPAT
;
428 /* 1 if support old (<= 2.8.1) versions of gcc. */
429 static int old_gcc
= OLDGCC_COMPAT
;
431 /* 1 if pseudo registers are permitted. */
432 static int allow_pseudo_reg
= 0;
434 /* 1 if register prefix % not required. */
435 static int allow_naked_reg
= 0;
437 /* 1 if pseudo index register, eiz/riz, is allowed . */
438 static int allow_index_reg
= 0;
448 /* Register prefix used for error message. */
449 static const char *register_prefix
= "%";
451 /* Used in 16 bit gcc mode to add an l suffix to call, ret, enter,
452 leave, push, and pop instructions so that gcc has the same stack
453 frame as in 32 bit mode. */
454 static char stackop_size
= '\0';
456 /* Non-zero to optimize code alignment. */
457 int optimize_align_code
= 1;
459 /* Non-zero to quieten some warnings. */
460 static int quiet_warnings
= 0;
463 static const char *cpu_arch_name
= NULL
;
464 static char *cpu_sub_arch_name
= NULL
;
466 /* CPU feature flags. */
467 static i386_cpu_flags cpu_arch_flags
= CPU_UNKNOWN_FLAGS
;
469 /* If we have selected a cpu we are generating instructions for. */
470 static int cpu_arch_tune_set
= 0;
472 /* Cpu we are generating instructions for. */
473 enum processor_type cpu_arch_tune
= PROCESSOR_UNKNOWN
;
475 /* CPU feature flags of cpu we are generating instructions for. */
476 static i386_cpu_flags cpu_arch_tune_flags
;
478 /* CPU instruction set architecture used. */
479 enum processor_type cpu_arch_isa
= PROCESSOR_UNKNOWN
;
481 /* CPU feature flags of instruction set architecture used. */
482 i386_cpu_flags cpu_arch_isa_flags
;
484 /* If set, conditional jumps are not automatically promoted to handle
485 larger than a byte offset. */
486 static unsigned int no_cond_jump_promotion
= 0;
488 /* Encode SSE instructions with VEX prefix. */
489 static unsigned int sse2avx
;
491 /* Encode scalar AVX instructions with specific vector length. */
498 /* Pre-defined "_GLOBAL_OFFSET_TABLE_". */
499 static symbolS
*GOT_symbol
;
501 /* The dwarf2 return column, adjusted for 32 or 64 bit. */
502 unsigned int x86_dwarf2_return_column
;
504 /* The dwarf2 data alignment, adjusted for 32 or 64 bit. */
505 int x86_cie_data_alignment
;
507 /* Interface to relax_segment.
508 There are 3 major relax states for 386 jump insns because the
509 different types of jumps add different sizes to frags when we're
510 figuring out what sort of jump to choose to reach a given label. */
513 #define UNCOND_JUMP 0
515 #define COND_JUMP86 2
520 #define SMALL16 (SMALL | CODE16)
522 #define BIG16 (BIG | CODE16)
526 #define INLINE __inline__
532 #define ENCODE_RELAX_STATE(type, size) \
533 ((relax_substateT) (((type) << 2) | (size)))
534 #define TYPE_FROM_RELAX_STATE(s) \
536 #define DISP_SIZE_FROM_RELAX_STATE(s) \
537 ((((s) & 3) == BIG ? 4 : (((s) & 3) == BIG16 ? 2 : 1)))
539 /* This table is used by relax_frag to promote short jumps to long
540 ones where necessary. SMALL (short) jumps may be promoted to BIG
541 (32 bit long) ones, and SMALL16 jumps to BIG16 (16 bit long). We
542 don't allow a short jump in a 32 bit code segment to be promoted to
543 a 16 bit offset jump because it's slower (requires data size
544 prefix), and doesn't work, unless the destination is in the bottom
545 64k of the code segment (The top 16 bits of eip are zeroed). */
547 const relax_typeS md_relax_table
[] =
550 1) most positive reach of this state,
551 2) most negative reach of this state,
552 3) how many bytes this mode will have in the variable part of the frag
553 4) which index into the table to try if we can't fit into this one. */
555 /* UNCOND_JUMP states. */
556 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (UNCOND_JUMP
, BIG
)},
557 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (UNCOND_JUMP
, BIG16
)},
558 /* dword jmp adds 4 bytes to frag:
559 0 extra opcode bytes, 4 displacement bytes. */
561 /* word jmp adds 2 byte2 to frag:
562 0 extra opcode bytes, 2 displacement bytes. */
565 /* COND_JUMP states. */
566 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP
, BIG
)},
567 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP
, BIG16
)},
568 /* dword conditionals adds 5 bytes to frag:
569 1 extra opcode byte, 4 displacement bytes. */
571 /* word conditionals add 3 bytes to frag:
572 1 extra opcode byte, 2 displacement bytes. */
575 /* COND_JUMP86 states. */
576 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP86
, BIG
)},
577 {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP86
, BIG16
)},
578 /* dword conditionals adds 5 bytes to frag:
579 1 extra opcode byte, 4 displacement bytes. */
581 /* word conditionals add 4 bytes to frag:
582 1 displacement byte and a 3 byte long branch insn. */
586 static const arch_entry cpu_arch
[] =
588 /* Do not replace the first two entries - i386_target_format()
589 relies on them being there in this order. */
590 { STRING_COMMA_LEN ("generic32"), PROCESSOR_GENERIC32
,
591 CPU_GENERIC32_FLAGS
, 0, 0 },
592 { STRING_COMMA_LEN ("generic64"), PROCESSOR_GENERIC64
,
593 CPU_GENERIC64_FLAGS
, 0, 0 },
594 { STRING_COMMA_LEN ("i8086"), PROCESSOR_UNKNOWN
,
595 CPU_NONE_FLAGS
, 0, 0 },
596 { STRING_COMMA_LEN ("i186"), PROCESSOR_UNKNOWN
,
597 CPU_I186_FLAGS
, 0, 0 },
598 { STRING_COMMA_LEN ("i286"), PROCESSOR_UNKNOWN
,
599 CPU_I286_FLAGS
, 0, 0 },
600 { STRING_COMMA_LEN ("i386"), PROCESSOR_I386
,
601 CPU_I386_FLAGS
, 0, 0 },
602 { STRING_COMMA_LEN ("i486"), PROCESSOR_I486
,
603 CPU_I486_FLAGS
, 0, 0 },
604 { STRING_COMMA_LEN ("i586"), PROCESSOR_PENTIUM
,
605 CPU_I586_FLAGS
, 0, 0 },
606 { STRING_COMMA_LEN ("i686"), PROCESSOR_PENTIUMPRO
,
607 CPU_I686_FLAGS
, 0, 0 },
608 { STRING_COMMA_LEN ("pentium"), PROCESSOR_PENTIUM
,
609 CPU_I586_FLAGS
, 0, 0 },
610 { STRING_COMMA_LEN ("pentiumpro"), PROCESSOR_PENTIUMPRO
,
611 CPU_PENTIUMPRO_FLAGS
, 0, 0 },
612 { STRING_COMMA_LEN ("pentiumii"), PROCESSOR_PENTIUMPRO
,
613 CPU_P2_FLAGS
, 0, 0 },
614 { STRING_COMMA_LEN ("pentiumiii"),PROCESSOR_PENTIUMPRO
,
615 CPU_P3_FLAGS
, 0, 0 },
616 { STRING_COMMA_LEN ("pentium4"), PROCESSOR_PENTIUM4
,
617 CPU_P4_FLAGS
, 0, 0 },
618 { STRING_COMMA_LEN ("prescott"), PROCESSOR_NOCONA
,
619 CPU_CORE_FLAGS
, 0, 0 },
620 { STRING_COMMA_LEN ("nocona"), PROCESSOR_NOCONA
,
621 CPU_NOCONA_FLAGS
, 0, 0 },
622 { STRING_COMMA_LEN ("yonah"), PROCESSOR_CORE
,
623 CPU_CORE_FLAGS
, 1, 0 },
624 { STRING_COMMA_LEN ("core"), PROCESSOR_CORE
,
625 CPU_CORE_FLAGS
, 0, 0 },
626 { STRING_COMMA_LEN ("merom"), PROCESSOR_CORE2
,
627 CPU_CORE2_FLAGS
, 1, 0 },
628 { STRING_COMMA_LEN ("core2"), PROCESSOR_CORE2
,
629 CPU_CORE2_FLAGS
, 0, 0 },
630 { STRING_COMMA_LEN ("corei7"), PROCESSOR_COREI7
,
631 CPU_COREI7_FLAGS
, 0, 0 },
632 { STRING_COMMA_LEN ("l1om"), PROCESSOR_L1OM
,
633 CPU_L1OM_FLAGS
, 0, 0 },
634 { STRING_COMMA_LEN ("k6"), PROCESSOR_K6
,
635 CPU_K6_FLAGS
, 0, 0 },
636 { STRING_COMMA_LEN ("k6_2"), PROCESSOR_K6
,
637 CPU_K6_2_FLAGS
, 0, 0 },
638 { STRING_COMMA_LEN ("athlon"), PROCESSOR_ATHLON
,
639 CPU_ATHLON_FLAGS
, 0, 0 },
640 { STRING_COMMA_LEN ("sledgehammer"), PROCESSOR_K8
,
641 CPU_K8_FLAGS
, 1, 0 },
642 { STRING_COMMA_LEN ("opteron"), PROCESSOR_K8
,
643 CPU_K8_FLAGS
, 0, 0 },
644 { STRING_COMMA_LEN ("k8"), PROCESSOR_K8
,
645 CPU_K8_FLAGS
, 0, 0 },
646 { STRING_COMMA_LEN ("amdfam10"), PROCESSOR_AMDFAM10
,
647 CPU_AMDFAM10_FLAGS
, 0, 0 },
648 { STRING_COMMA_LEN ("bdver1"), PROCESSOR_BDVER1
,
649 CPU_BDVER1_FLAGS
, 0, 0 },
650 { STRING_COMMA_LEN (".8087"), PROCESSOR_UNKNOWN
,
651 CPU_8087_FLAGS
, 0, 0 },
652 { STRING_COMMA_LEN (".287"), PROCESSOR_UNKNOWN
,
653 CPU_287_FLAGS
, 0, 0 },
654 { STRING_COMMA_LEN (".387"), PROCESSOR_UNKNOWN
,
655 CPU_387_FLAGS
, 0, 0 },
656 { STRING_COMMA_LEN (".no87"), PROCESSOR_UNKNOWN
,
657 CPU_ANY87_FLAGS
, 0, 1 },
658 { STRING_COMMA_LEN (".mmx"), PROCESSOR_UNKNOWN
,
659 CPU_MMX_FLAGS
, 0, 0 },
660 { STRING_COMMA_LEN (".nommx"), PROCESSOR_UNKNOWN
,
661 CPU_3DNOWA_FLAGS
, 0, 1 },
662 { STRING_COMMA_LEN (".sse"), PROCESSOR_UNKNOWN
,
663 CPU_SSE_FLAGS
, 0, 0 },
664 { STRING_COMMA_LEN (".sse2"), PROCESSOR_UNKNOWN
,
665 CPU_SSE2_FLAGS
, 0, 0 },
666 { STRING_COMMA_LEN (".sse3"), PROCESSOR_UNKNOWN
,
667 CPU_SSE3_FLAGS
, 0, 0 },
668 { STRING_COMMA_LEN (".ssse3"), PROCESSOR_UNKNOWN
,
669 CPU_SSSE3_FLAGS
, 0, 0 },
670 { STRING_COMMA_LEN (".sse4.1"), PROCESSOR_UNKNOWN
,
671 CPU_SSE4_1_FLAGS
, 0, 0 },
672 { STRING_COMMA_LEN (".sse4.2"), PROCESSOR_UNKNOWN
,
673 CPU_SSE4_2_FLAGS
, 0, 0 },
674 { STRING_COMMA_LEN (".sse4"), PROCESSOR_UNKNOWN
,
675 CPU_SSE4_2_FLAGS
, 0, 0 },
676 { STRING_COMMA_LEN (".nosse"), PROCESSOR_UNKNOWN
,
677 CPU_ANY_SSE_FLAGS
, 0, 1 },
678 { STRING_COMMA_LEN (".avx"), PROCESSOR_UNKNOWN
,
679 CPU_AVX_FLAGS
, 0, 0 },
680 { STRING_COMMA_LEN (".noavx"), PROCESSOR_UNKNOWN
,
681 CPU_ANY_AVX_FLAGS
, 0, 1 },
682 { STRING_COMMA_LEN (".vmx"), PROCESSOR_UNKNOWN
,
683 CPU_VMX_FLAGS
, 0, 0 },
684 { STRING_COMMA_LEN (".smx"), PROCESSOR_UNKNOWN
,
685 CPU_SMX_FLAGS
, 0, 0 },
686 { STRING_COMMA_LEN (".xsave"), PROCESSOR_UNKNOWN
,
687 CPU_XSAVE_FLAGS
, 0, 0 },
688 { STRING_COMMA_LEN (".xsaveopt"), PROCESSOR_UNKNOWN
,
689 CPU_XSAVEOPT_FLAGS
, 0, 0 },
690 { STRING_COMMA_LEN (".aes"), PROCESSOR_UNKNOWN
,
691 CPU_AES_FLAGS
, 0, 0 },
692 { STRING_COMMA_LEN (".pclmul"), PROCESSOR_UNKNOWN
,
693 CPU_PCLMUL_FLAGS
, 0, 0 },
694 { STRING_COMMA_LEN (".clmul"), PROCESSOR_UNKNOWN
,
695 CPU_PCLMUL_FLAGS
, 1, 0 },
696 { STRING_COMMA_LEN (".fsgsbase"), PROCESSOR_UNKNOWN
,
697 CPU_FSGSBASE_FLAGS
, 0, 0 },
698 { STRING_COMMA_LEN (".rdrnd"), PROCESSOR_UNKNOWN
,
699 CPU_RDRND_FLAGS
, 0, 0 },
700 { STRING_COMMA_LEN (".f16c"), PROCESSOR_UNKNOWN
,
701 CPU_F16C_FLAGS
, 0, 0 },
702 { STRING_COMMA_LEN (".fma"), PROCESSOR_UNKNOWN
,
703 CPU_FMA_FLAGS
, 0, 0 },
704 { STRING_COMMA_LEN (".fma4"), PROCESSOR_UNKNOWN
,
705 CPU_FMA4_FLAGS
, 0, 0 },
706 { STRING_COMMA_LEN (".xop"), PROCESSOR_UNKNOWN
,
707 CPU_XOP_FLAGS
, 0, 0 },
708 { STRING_COMMA_LEN (".lwp"), PROCESSOR_UNKNOWN
,
709 CPU_LWP_FLAGS
, 0, 0 },
710 { STRING_COMMA_LEN (".movbe"), PROCESSOR_UNKNOWN
,
711 CPU_MOVBE_FLAGS
, 0, 0 },
712 { STRING_COMMA_LEN (".ept"), PROCESSOR_UNKNOWN
,
713 CPU_EPT_FLAGS
, 0, 0 },
714 { STRING_COMMA_LEN (".clflush"), PROCESSOR_UNKNOWN
,
715 CPU_CLFLUSH_FLAGS
, 0, 0 },
716 { STRING_COMMA_LEN (".nop"), PROCESSOR_UNKNOWN
,
717 CPU_NOP_FLAGS
, 0, 0 },
718 { STRING_COMMA_LEN (".syscall"), PROCESSOR_UNKNOWN
,
719 CPU_SYSCALL_FLAGS
, 0, 0 },
720 { STRING_COMMA_LEN (".rdtscp"), PROCESSOR_UNKNOWN
,
721 CPU_RDTSCP_FLAGS
, 0, 0 },
722 { STRING_COMMA_LEN (".3dnow"), PROCESSOR_UNKNOWN
,
723 CPU_3DNOW_FLAGS
, 0, 0 },
724 { STRING_COMMA_LEN (".3dnowa"), PROCESSOR_UNKNOWN
,
725 CPU_3DNOWA_FLAGS
, 0, 0 },
726 { STRING_COMMA_LEN (".padlock"), PROCESSOR_UNKNOWN
,
727 CPU_PADLOCK_FLAGS
, 0, 0 },
728 { STRING_COMMA_LEN (".pacifica"), PROCESSOR_UNKNOWN
,
729 CPU_SVME_FLAGS
, 1, 0 },
730 { STRING_COMMA_LEN (".svme"), PROCESSOR_UNKNOWN
,
731 CPU_SVME_FLAGS
, 0, 0 },
732 { STRING_COMMA_LEN (".sse4a"), PROCESSOR_UNKNOWN
,
733 CPU_SSE4A_FLAGS
, 0, 0 },
734 { STRING_COMMA_LEN (".abm"), PROCESSOR_UNKNOWN
,
735 CPU_ABM_FLAGS
, 0, 0 },
736 { STRING_COMMA_LEN (".bmi"), PROCESSOR_UNKNOWN
,
737 CPU_BMI_FLAGS
, 0, 0 },
738 { STRING_COMMA_LEN (".tbm"), PROCESSOR_UNKNOWN
,
739 CPU_TBM_FLAGS
, 0, 0 },
743 /* Like s_lcomm_internal in gas/read.c but the alignment string
744 is allowed to be optional. */
747 pe_lcomm_internal (int needs_align
, symbolS
*symbolP
, addressT size
)
754 && *input_line_pointer
== ',')
756 align
= parse_align (needs_align
- 1);
758 if (align
== (addressT
) -1)
773 bss_alloc (symbolP
, size
, align
);
778 pe_lcomm (int needs_align
)
780 s_comm_internal (needs_align
* 2, pe_lcomm_internal
);
784 const pseudo_typeS md_pseudo_table
[] =
786 #if !defined(OBJ_AOUT) && !defined(USE_ALIGN_PTWO)
787 {"align", s_align_bytes
, 0},
789 {"align", s_align_ptwo
, 0},
791 {"arch", set_cpu_arch
, 0},
795 {"lcomm", pe_lcomm
, 1},
797 {"ffloat", float_cons
, 'f'},
798 {"dfloat", float_cons
, 'd'},
799 {"tfloat", float_cons
, 'x'},
801 {"slong", signed_cons
, 4},
802 {"noopt", s_ignore
, 0},
803 {"optim", s_ignore
, 0},
804 {"code16gcc", set_16bit_gcc_code_flag
, CODE_16BIT
},
805 {"code16", set_code_flag
, CODE_16BIT
},
806 {"code32", set_code_flag
, CODE_32BIT
},
807 {"code64", set_code_flag
, CODE_64BIT
},
808 {"intel_syntax", set_intel_syntax
, 1},
809 {"att_syntax", set_intel_syntax
, 0},
810 {"intel_mnemonic", set_intel_mnemonic
, 1},
811 {"att_mnemonic", set_intel_mnemonic
, 0},
812 {"allow_index_reg", set_allow_index_reg
, 1},
813 {"disallow_index_reg", set_allow_index_reg
, 0},
814 {"sse_check", set_sse_check
, 0},
815 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
816 {"largecomm", handle_large_common
, 0},
817 {"quad", handle_quad
, 8},
819 {"file", (void (*) (int)) dwarf2_directive_file
, 0},
820 {"loc", dwarf2_directive_loc
, 0},
821 {"loc_mark_labels", dwarf2_directive_loc_mark_labels
, 0},
824 {"secrel32", pe_directive_secrel
, 0},
829 /* For interface with expression (). */
830 extern char *input_line_pointer
;
832 /* Hash table for instruction mnemonic lookup. */
833 static struct hash_control
*op_hash
;
835 /* Hash table for register lookup. */
836 static struct hash_control
*reg_hash
;
839 i386_align_code (fragS
*fragP
, int count
)
841 /* Various efficient no-op patterns for aligning code labels.
842 Note: Don't try to assemble the instructions in the comments.
843 0L and 0w are not legal. */
844 static const char f32_1
[] =
846 static const char f32_2
[] =
847 {0x66,0x90}; /* xchg %ax,%ax */
848 static const char f32_3
[] =
849 {0x8d,0x76,0x00}; /* leal 0(%esi),%esi */
850 static const char f32_4
[] =
851 {0x8d,0x74,0x26,0x00}; /* leal 0(%esi,1),%esi */
852 static const char f32_5
[] =
854 0x8d,0x74,0x26,0x00}; /* leal 0(%esi,1),%esi */
855 static const char f32_6
[] =
856 {0x8d,0xb6,0x00,0x00,0x00,0x00}; /* leal 0L(%esi),%esi */
857 static const char f32_7
[] =
858 {0x8d,0xb4,0x26,0x00,0x00,0x00,0x00}; /* leal 0L(%esi,1),%esi */
859 static const char f32_8
[] =
861 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00}; /* leal 0L(%esi,1),%esi */
862 static const char f32_9
[] =
863 {0x89,0xf6, /* movl %esi,%esi */
864 0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
865 static const char f32_10
[] =
866 {0x8d,0x76,0x00, /* leal 0(%esi),%esi */
867 0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
868 static const char f32_11
[] =
869 {0x8d,0x74,0x26,0x00, /* leal 0(%esi,1),%esi */
870 0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
871 static const char f32_12
[] =
872 {0x8d,0xb6,0x00,0x00,0x00,0x00, /* leal 0L(%esi),%esi */
873 0x8d,0xbf,0x00,0x00,0x00,0x00}; /* leal 0L(%edi),%edi */
874 static const char f32_13
[] =
875 {0x8d,0xb6,0x00,0x00,0x00,0x00, /* leal 0L(%esi),%esi */
876 0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
877 static const char f32_14
[] =
878 {0x8d,0xb4,0x26,0x00,0x00,0x00,0x00, /* leal 0L(%esi,1),%esi */
879 0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
880 static const char f16_3
[] =
881 {0x8d,0x74,0x00}; /* lea 0(%esi),%esi */
882 static const char f16_4
[] =
883 {0x8d,0xb4,0x00,0x00}; /* lea 0w(%si),%si */
884 static const char f16_5
[] =
886 0x8d,0xb4,0x00,0x00}; /* lea 0w(%si),%si */
887 static const char f16_6
[] =
888 {0x89,0xf6, /* mov %si,%si */
889 0x8d,0xbd,0x00,0x00}; /* lea 0w(%di),%di */
890 static const char f16_7
[] =
891 {0x8d,0x74,0x00, /* lea 0(%si),%si */
892 0x8d,0xbd,0x00,0x00}; /* lea 0w(%di),%di */
893 static const char f16_8
[] =
894 {0x8d,0xb4,0x00,0x00, /* lea 0w(%si),%si */
895 0x8d,0xbd,0x00,0x00}; /* lea 0w(%di),%di */
896 static const char jump_31
[] =
897 {0xeb,0x1d,0x90,0x90,0x90,0x90,0x90, /* jmp .+31; lotsa nops */
898 0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,
899 0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,
900 0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90};
901 static const char *const f32_patt
[] = {
902 f32_1
, f32_2
, f32_3
, f32_4
, f32_5
, f32_6
, f32_7
, f32_8
,
903 f32_9
, f32_10
, f32_11
, f32_12
, f32_13
, f32_14
905 static const char *const f16_patt
[] = {
906 f32_1
, f32_2
, f16_3
, f16_4
, f16_5
, f16_6
, f16_7
, f16_8
909 static const char alt_3
[] =
911 /* nopl 0(%[re]ax) */
912 static const char alt_4
[] =
913 {0x0f,0x1f,0x40,0x00};
914 /* nopl 0(%[re]ax,%[re]ax,1) */
915 static const char alt_5
[] =
916 {0x0f,0x1f,0x44,0x00,0x00};
917 /* nopw 0(%[re]ax,%[re]ax,1) */
918 static const char alt_6
[] =
919 {0x66,0x0f,0x1f,0x44,0x00,0x00};
920 /* nopl 0L(%[re]ax) */
921 static const char alt_7
[] =
922 {0x0f,0x1f,0x80,0x00,0x00,0x00,0x00};
923 /* nopl 0L(%[re]ax,%[re]ax,1) */
924 static const char alt_8
[] =
925 {0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
926 /* nopw 0L(%[re]ax,%[re]ax,1) */
927 static const char alt_9
[] =
928 {0x66,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
929 /* nopw %cs:0L(%[re]ax,%[re]ax,1) */
930 static const char alt_10
[] =
931 {0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
933 nopw %cs:0L(%[re]ax,%[re]ax,1) */
934 static const char alt_long_11
[] =
936 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
939 nopw %cs:0L(%[re]ax,%[re]ax,1) */
940 static const char alt_long_12
[] =
943 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
947 nopw %cs:0L(%[re]ax,%[re]ax,1) */
948 static const char alt_long_13
[] =
952 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
957 nopw %cs:0L(%[re]ax,%[re]ax,1) */
958 static const char alt_long_14
[] =
963 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
969 nopw %cs:0L(%[re]ax,%[re]ax,1) */
970 static const char alt_long_15
[] =
976 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
977 /* nopl 0(%[re]ax,%[re]ax,1)
978 nopw 0(%[re]ax,%[re]ax,1) */
979 static const char alt_short_11
[] =
980 {0x0f,0x1f,0x44,0x00,0x00,
981 0x66,0x0f,0x1f,0x44,0x00,0x00};
982 /* nopw 0(%[re]ax,%[re]ax,1)
983 nopw 0(%[re]ax,%[re]ax,1) */
984 static const char alt_short_12
[] =
985 {0x66,0x0f,0x1f,0x44,0x00,0x00,
986 0x66,0x0f,0x1f,0x44,0x00,0x00};
987 /* nopw 0(%[re]ax,%[re]ax,1)
989 static const char alt_short_13
[] =
990 {0x66,0x0f,0x1f,0x44,0x00,0x00,
991 0x0f,0x1f,0x80,0x00,0x00,0x00,0x00};
994 static const char alt_short_14
[] =
995 {0x0f,0x1f,0x80,0x00,0x00,0x00,0x00,
996 0x0f,0x1f,0x80,0x00,0x00,0x00,0x00};
998 nopl 0L(%[re]ax,%[re]ax,1) */
999 static const char alt_short_15
[] =
1000 {0x0f,0x1f,0x80,0x00,0x00,0x00,0x00,
1001 0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
1002 static const char *const alt_short_patt
[] = {
1003 f32_1
, f32_2
, alt_3
, alt_4
, alt_5
, alt_6
, alt_7
, alt_8
,
1004 alt_9
, alt_10
, alt_short_11
, alt_short_12
, alt_short_13
,
1005 alt_short_14
, alt_short_15
1007 static const char *const alt_long_patt
[] = {
1008 f32_1
, f32_2
, alt_3
, alt_4
, alt_5
, alt_6
, alt_7
, alt_8
,
1009 alt_9
, alt_10
, alt_long_11
, alt_long_12
, alt_long_13
,
1010 alt_long_14
, alt_long_15
1013 /* Only align for at least a positive non-zero boundary. */
1014 if (count
<= 0 || count
> MAX_MEM_FOR_RS_ALIGN_CODE
)
1017 /* We need to decide which NOP sequence to use for 32bit and
1018 64bit. When -mtune= is used:
1020 1. For PROCESSOR_I386, PROCESSOR_I486, PROCESSOR_PENTIUM and
1021 PROCESSOR_GENERIC32, f32_patt will be used.
1022 2. For PROCESSOR_PENTIUMPRO, PROCESSOR_PENTIUM4, PROCESSOR_NOCONA,
1023 PROCESSOR_CORE, PROCESSOR_CORE2, PROCESSOR_COREI7, and
1024 PROCESSOR_GENERIC64, alt_long_patt will be used.
1025 3. For PROCESSOR_ATHLON, PROCESSOR_K6, PROCESSOR_K8 and
1026 PROCESSOR_AMDFAM10, and PROCESSOR_BDVER1, alt_short_patt
1029 When -mtune= isn't used, alt_long_patt will be used if
1030 cpu_arch_isa_flags has CpuNop. Otherwise, f32_patt will
1033 When -march= or .arch is used, we can't use anything beyond
1034 cpu_arch_isa_flags. */
1036 if (flag_code
== CODE_16BIT
)
1040 memcpy (fragP
->fr_literal
+ fragP
->fr_fix
,
1042 /* Adjust jump offset. */
1043 fragP
->fr_literal
[fragP
->fr_fix
+ 1] = count
- 2;
1046 memcpy (fragP
->fr_literal
+ fragP
->fr_fix
,
1047 f16_patt
[count
- 1], count
);
1051 const char *const *patt
= NULL
;
1053 if (fragP
->tc_frag_data
.isa
== PROCESSOR_UNKNOWN
)
1055 /* PROCESSOR_UNKNOWN means that all ISAs may be used. */
1056 switch (cpu_arch_tune
)
1058 case PROCESSOR_UNKNOWN
:
1059 /* We use cpu_arch_isa_flags to check if we SHOULD
1060 optimize with nops. */
1061 if (fragP
->tc_frag_data
.isa_flags
.bitfield
.cpunop
)
1062 patt
= alt_long_patt
;
1066 case PROCESSOR_PENTIUM4
:
1067 case PROCESSOR_NOCONA
:
1068 case PROCESSOR_CORE
:
1069 case PROCESSOR_CORE2
:
1070 case PROCESSOR_COREI7
:
1071 case PROCESSOR_L1OM
:
1072 case PROCESSOR_GENERIC64
:
1073 patt
= alt_long_patt
;
1076 case PROCESSOR_ATHLON
:
1078 case PROCESSOR_AMDFAM10
:
1079 case PROCESSOR_BDVER1
:
1080 patt
= alt_short_patt
;
1082 case PROCESSOR_I386
:
1083 case PROCESSOR_I486
:
1084 case PROCESSOR_PENTIUM
:
1085 case PROCESSOR_PENTIUMPRO
:
1086 case PROCESSOR_GENERIC32
:
1093 switch (fragP
->tc_frag_data
.tune
)
1095 case PROCESSOR_UNKNOWN
:
1096 /* When cpu_arch_isa is set, cpu_arch_tune shouldn't be
1097 PROCESSOR_UNKNOWN. */
1101 case PROCESSOR_I386
:
1102 case PROCESSOR_I486
:
1103 case PROCESSOR_PENTIUM
:
1105 case PROCESSOR_ATHLON
:
1107 case PROCESSOR_AMDFAM10
:
1108 case PROCESSOR_BDVER1
:
1109 case PROCESSOR_GENERIC32
:
1110 /* We use cpu_arch_isa_flags to check if we CAN optimize
1112 if (fragP
->tc_frag_data
.isa_flags
.bitfield
.cpunop
)
1113 patt
= alt_short_patt
;
1117 case PROCESSOR_PENTIUMPRO
:
1118 case PROCESSOR_PENTIUM4
:
1119 case PROCESSOR_NOCONA
:
1120 case PROCESSOR_CORE
:
1121 case PROCESSOR_CORE2
:
1122 case PROCESSOR_COREI7
:
1123 case PROCESSOR_L1OM
:
1124 if (fragP
->tc_frag_data
.isa_flags
.bitfield
.cpunop
)
1125 patt
= alt_long_patt
;
1129 case PROCESSOR_GENERIC64
:
1130 patt
= alt_long_patt
;
1135 if (patt
== f32_patt
)
1137 /* If the padding is less than 15 bytes, we use the normal
1138 ones. Otherwise, we use a jump instruction and adjust
1142 /* For 64bit, the limit is 3 bytes. */
1143 if (flag_code
== CODE_64BIT
1144 && fragP
->tc_frag_data
.isa_flags
.bitfield
.cpulm
)
1149 memcpy (fragP
->fr_literal
+ fragP
->fr_fix
,
1150 patt
[count
- 1], count
);
1153 memcpy (fragP
->fr_literal
+ fragP
->fr_fix
,
1155 /* Adjust jump offset. */
1156 fragP
->fr_literal
[fragP
->fr_fix
+ 1] = count
- 2;
1161 /* Maximum length of an instruction is 15 byte. If the
1162 padding is greater than 15 bytes and we don't use jump,
1163 we have to break it into smaller pieces. */
1164 int padding
= count
;
1165 while (padding
> 15)
1168 memcpy (fragP
->fr_literal
+ fragP
->fr_fix
+ padding
,
1173 memcpy (fragP
->fr_literal
+ fragP
->fr_fix
,
1174 patt
[padding
- 1], padding
);
1177 fragP
->fr_var
= count
;
1181 operand_type_all_zero (const union i386_operand_type
*x
)
1183 switch (ARRAY_SIZE(x
->array
))
1192 return !x
->array
[0];
1199 operand_type_set (union i386_operand_type
*x
, unsigned int v
)
1201 switch (ARRAY_SIZE(x
->array
))
1216 operand_type_equal (const union i386_operand_type
*x
,
1217 const union i386_operand_type
*y
)
1219 switch (ARRAY_SIZE(x
->array
))
1222 if (x
->array
[2] != y
->array
[2])
1225 if (x
->array
[1] != y
->array
[1])
1228 return x
->array
[0] == y
->array
[0];
1236 cpu_flags_all_zero (const union i386_cpu_flags
*x
)
1238 switch (ARRAY_SIZE(x
->array
))
1247 return !x
->array
[0];
1254 cpu_flags_set (union i386_cpu_flags
*x
, unsigned int v
)
1256 switch (ARRAY_SIZE(x
->array
))
1271 cpu_flags_equal (const union i386_cpu_flags
*x
,
1272 const union i386_cpu_flags
*y
)
1274 switch (ARRAY_SIZE(x
->array
))
1277 if (x
->array
[2] != y
->array
[2])
1280 if (x
->array
[1] != y
->array
[1])
1283 return x
->array
[0] == y
->array
[0];
1291 cpu_flags_check_cpu64 (i386_cpu_flags f
)
1293 return !((flag_code
== CODE_64BIT
&& f
.bitfield
.cpuno64
)
1294 || (flag_code
!= CODE_64BIT
&& f
.bitfield
.cpu64
));
1297 static INLINE i386_cpu_flags
1298 cpu_flags_and (i386_cpu_flags x
, i386_cpu_flags y
)
1300 switch (ARRAY_SIZE (x
.array
))
1303 x
.array
[2] &= y
.array
[2];
1305 x
.array
[1] &= y
.array
[1];
1307 x
.array
[0] &= y
.array
[0];
1315 static INLINE i386_cpu_flags
1316 cpu_flags_or (i386_cpu_flags x
, i386_cpu_flags y
)
1318 switch (ARRAY_SIZE (x
.array
))
1321 x
.array
[2] |= y
.array
[2];
1323 x
.array
[1] |= y
.array
[1];
1325 x
.array
[0] |= y
.array
[0];
1333 static INLINE i386_cpu_flags
1334 cpu_flags_and_not (i386_cpu_flags x
, i386_cpu_flags y
)
1336 switch (ARRAY_SIZE (x
.array
))
1339 x
.array
[2] &= ~y
.array
[2];
1341 x
.array
[1] &= ~y
.array
[1];
1343 x
.array
[0] &= ~y
.array
[0];
1351 #define CPU_FLAGS_ARCH_MATCH 0x1
1352 #define CPU_FLAGS_64BIT_MATCH 0x2
1353 #define CPU_FLAGS_AES_MATCH 0x4
1354 #define CPU_FLAGS_PCLMUL_MATCH 0x8
1355 #define CPU_FLAGS_AVX_MATCH 0x10
1357 #define CPU_FLAGS_32BIT_MATCH \
1358 (CPU_FLAGS_ARCH_MATCH | CPU_FLAGS_AES_MATCH \
1359 | CPU_FLAGS_PCLMUL_MATCH | CPU_FLAGS_AVX_MATCH)
1360 #define CPU_FLAGS_PERFECT_MATCH \
1361 (CPU_FLAGS_32BIT_MATCH | CPU_FLAGS_64BIT_MATCH)
1363 /* Return CPU flags match bits. */
1366 cpu_flags_match (const insn_template
*t
)
1368 i386_cpu_flags x
= t
->cpu_flags
;
1369 int match
= cpu_flags_check_cpu64 (x
) ? CPU_FLAGS_64BIT_MATCH
: 0;
1371 x
.bitfield
.cpu64
= 0;
1372 x
.bitfield
.cpuno64
= 0;
1374 if (cpu_flags_all_zero (&x
))
1376 /* This instruction is available on all archs. */
1377 match
|= CPU_FLAGS_32BIT_MATCH
;
1381 /* This instruction is available only on some archs. */
1382 i386_cpu_flags cpu
= cpu_arch_flags
;
1384 cpu
.bitfield
.cpu64
= 0;
1385 cpu
.bitfield
.cpuno64
= 0;
1386 cpu
= cpu_flags_and (x
, cpu
);
1387 if (!cpu_flags_all_zero (&cpu
))
1389 if (x
.bitfield
.cpuavx
)
1391 /* We only need to check AES/PCLMUL/SSE2AVX with AVX. */
1392 if (cpu
.bitfield
.cpuavx
)
1394 /* Check SSE2AVX. */
1395 if (!t
->opcode_modifier
.sse2avx
|| sse2avx
)
1397 match
|= (CPU_FLAGS_ARCH_MATCH
1398 | CPU_FLAGS_AVX_MATCH
);
1400 if (!x
.bitfield
.cpuaes
|| cpu
.bitfield
.cpuaes
)
1401 match
|= CPU_FLAGS_AES_MATCH
;
1403 if (!x
.bitfield
.cpupclmul
1404 || cpu
.bitfield
.cpupclmul
)
1405 match
|= CPU_FLAGS_PCLMUL_MATCH
;
1409 match
|= CPU_FLAGS_ARCH_MATCH
;
1412 match
|= CPU_FLAGS_32BIT_MATCH
;
1418 static INLINE i386_operand_type
1419 operand_type_and (i386_operand_type x
, i386_operand_type y
)
1421 switch (ARRAY_SIZE (x
.array
))
1424 x
.array
[2] &= y
.array
[2];
1426 x
.array
[1] &= y
.array
[1];
1428 x
.array
[0] &= y
.array
[0];
1436 static INLINE i386_operand_type
1437 operand_type_or (i386_operand_type x
, i386_operand_type y
)
1439 switch (ARRAY_SIZE (x
.array
))
1442 x
.array
[2] |= y
.array
[2];
1444 x
.array
[1] |= y
.array
[1];
1446 x
.array
[0] |= y
.array
[0];
1454 static INLINE i386_operand_type
1455 operand_type_xor (i386_operand_type x
, i386_operand_type y
)
1457 switch (ARRAY_SIZE (x
.array
))
1460 x
.array
[2] ^= y
.array
[2];
1462 x
.array
[1] ^= y
.array
[1];
1464 x
.array
[0] ^= y
.array
[0];
1472 static const i386_operand_type acc32
= OPERAND_TYPE_ACC32
;
1473 static const i386_operand_type acc64
= OPERAND_TYPE_ACC64
;
1474 static const i386_operand_type control
= OPERAND_TYPE_CONTROL
;
1475 static const i386_operand_type inoutportreg
1476 = OPERAND_TYPE_INOUTPORTREG
;
1477 static const i386_operand_type reg16_inoutportreg
1478 = OPERAND_TYPE_REG16_INOUTPORTREG
;
1479 static const i386_operand_type disp16
= OPERAND_TYPE_DISP16
;
1480 static const i386_operand_type disp32
= OPERAND_TYPE_DISP32
;
1481 static const i386_operand_type disp32s
= OPERAND_TYPE_DISP32S
;
1482 static const i386_operand_type disp16_32
= OPERAND_TYPE_DISP16_32
;
1483 static const i386_operand_type anydisp
1484 = OPERAND_TYPE_ANYDISP
;
1485 static const i386_operand_type regxmm
= OPERAND_TYPE_REGXMM
;
1486 static const i386_operand_type regymm
= OPERAND_TYPE_REGYMM
;
1487 static const i386_operand_type imm8
= OPERAND_TYPE_IMM8
;
1488 static const i386_operand_type imm8s
= OPERAND_TYPE_IMM8S
;
1489 static const i386_operand_type imm16
= OPERAND_TYPE_IMM16
;
1490 static const i386_operand_type imm32
= OPERAND_TYPE_IMM32
;
1491 static const i386_operand_type imm32s
= OPERAND_TYPE_IMM32S
;
1492 static const i386_operand_type imm64
= OPERAND_TYPE_IMM64
;
1493 static const i386_operand_type imm16_32
= OPERAND_TYPE_IMM16_32
;
1494 static const i386_operand_type imm16_32s
= OPERAND_TYPE_IMM16_32S
;
1495 static const i386_operand_type imm16_32_32s
= OPERAND_TYPE_IMM16_32_32S
;
1496 static const i386_operand_type vec_imm4
= OPERAND_TYPE_VEC_IMM4
;
1507 operand_type_check (i386_operand_type t
, enum operand_type c
)
1512 return (t
.bitfield
.reg8
1515 || t
.bitfield
.reg64
);
1518 return (t
.bitfield
.imm8
1522 || t
.bitfield
.imm32s
1523 || t
.bitfield
.imm64
);
1526 return (t
.bitfield
.disp8
1527 || t
.bitfield
.disp16
1528 || t
.bitfield
.disp32
1529 || t
.bitfield
.disp32s
1530 || t
.bitfield
.disp64
);
1533 return (t
.bitfield
.disp8
1534 || t
.bitfield
.disp16
1535 || t
.bitfield
.disp32
1536 || t
.bitfield
.disp32s
1537 || t
.bitfield
.disp64
1538 || t
.bitfield
.baseindex
);
1547 /* Return 1 if there is no conflict in 8bit/16bit/32bit/64bit on
1548 operand J for instruction template T. */
1551 match_reg_size (const insn_template
*t
, unsigned int j
)
1553 return !((i
.types
[j
].bitfield
.byte
1554 && !t
->operand_types
[j
].bitfield
.byte
)
1555 || (i
.types
[j
].bitfield
.word
1556 && !t
->operand_types
[j
].bitfield
.word
)
1557 || (i
.types
[j
].bitfield
.dword
1558 && !t
->operand_types
[j
].bitfield
.dword
)
1559 || (i
.types
[j
].bitfield
.qword
1560 && !t
->operand_types
[j
].bitfield
.qword
));
1563 /* Return 1 if there is no conflict in any size on operand J for
1564 instruction template T. */
1567 match_mem_size (const insn_template
*t
, unsigned int j
)
1569 return (match_reg_size (t
, j
)
1570 && !((i
.types
[j
].bitfield
.unspecified
1571 && !t
->operand_types
[j
].bitfield
.unspecified
)
1572 || (i
.types
[j
].bitfield
.fword
1573 && !t
->operand_types
[j
].bitfield
.fword
)
1574 || (i
.types
[j
].bitfield
.tbyte
1575 && !t
->operand_types
[j
].bitfield
.tbyte
)
1576 || (i
.types
[j
].bitfield
.xmmword
1577 && !t
->operand_types
[j
].bitfield
.xmmword
)
1578 || (i
.types
[j
].bitfield
.ymmword
1579 && !t
->operand_types
[j
].bitfield
.ymmword
)));
1582 /* Return 1 if there is no size conflict on any operands for
1583 instruction template T. */
1586 operand_size_match (const insn_template
*t
)
1591 /* Don't check jump instructions. */
1592 if (t
->opcode_modifier
.jump
1593 || t
->opcode_modifier
.jumpbyte
1594 || t
->opcode_modifier
.jumpdword
1595 || t
->opcode_modifier
.jumpintersegment
)
1598 /* Check memory and accumulator operand size. */
1599 for (j
= 0; j
< i
.operands
; j
++)
1601 if (t
->operand_types
[j
].bitfield
.anysize
)
1604 if (t
->operand_types
[j
].bitfield
.acc
&& !match_reg_size (t
, j
))
1610 if (i
.types
[j
].bitfield
.mem
&& !match_mem_size (t
, j
))
1619 else if (!t
->opcode_modifier
.d
&& !t
->opcode_modifier
.floatd
)
1622 i
.error
= operand_size_mismatch
;
1626 /* Check reverse. */
1627 gas_assert (i
.operands
== 2);
1630 for (j
= 0; j
< 2; j
++)
1632 if (t
->operand_types
[j
].bitfield
.acc
1633 && !match_reg_size (t
, j
? 0 : 1))
1636 if (i
.types
[j
].bitfield
.mem
1637 && !match_mem_size (t
, j
? 0 : 1))
1645 operand_type_match (i386_operand_type overlap
,
1646 i386_operand_type given
)
1648 i386_operand_type temp
= overlap
;
1650 temp
.bitfield
.jumpabsolute
= 0;
1651 temp
.bitfield
.unspecified
= 0;
1652 temp
.bitfield
.byte
= 0;
1653 temp
.bitfield
.word
= 0;
1654 temp
.bitfield
.dword
= 0;
1655 temp
.bitfield
.fword
= 0;
1656 temp
.bitfield
.qword
= 0;
1657 temp
.bitfield
.tbyte
= 0;
1658 temp
.bitfield
.xmmword
= 0;
1659 temp
.bitfield
.ymmword
= 0;
1660 if (operand_type_all_zero (&temp
))
1663 if (given
.bitfield
.baseindex
== overlap
.bitfield
.baseindex
1664 && given
.bitfield
.jumpabsolute
== overlap
.bitfield
.jumpabsolute
)
1668 i
.error
= operand_type_mismatch
;
1672 /* If given types g0 and g1 are registers they must be of the same type
1673 unless the expected operand type register overlap is null.
1674 Note that Acc in a template matches every size of reg. */
1677 operand_type_register_match (i386_operand_type m0
,
1678 i386_operand_type g0
,
1679 i386_operand_type t0
,
1680 i386_operand_type m1
,
1681 i386_operand_type g1
,
1682 i386_operand_type t1
)
1684 if (!operand_type_check (g0
, reg
))
1687 if (!operand_type_check (g1
, reg
))
1690 if (g0
.bitfield
.reg8
== g1
.bitfield
.reg8
1691 && g0
.bitfield
.reg16
== g1
.bitfield
.reg16
1692 && g0
.bitfield
.reg32
== g1
.bitfield
.reg32
1693 && g0
.bitfield
.reg64
== g1
.bitfield
.reg64
)
1696 if (m0
.bitfield
.acc
)
1698 t0
.bitfield
.reg8
= 1;
1699 t0
.bitfield
.reg16
= 1;
1700 t0
.bitfield
.reg32
= 1;
1701 t0
.bitfield
.reg64
= 1;
1704 if (m1
.bitfield
.acc
)
1706 t1
.bitfield
.reg8
= 1;
1707 t1
.bitfield
.reg16
= 1;
1708 t1
.bitfield
.reg32
= 1;
1709 t1
.bitfield
.reg64
= 1;
1712 if (!(t0
.bitfield
.reg8
& t1
.bitfield
.reg8
)
1713 && !(t0
.bitfield
.reg16
& t1
.bitfield
.reg16
)
1714 && !(t0
.bitfield
.reg32
& t1
.bitfield
.reg32
)
1715 && !(t0
.bitfield
.reg64
& t1
.bitfield
.reg64
))
1718 i
.error
= register_type_mismatch
;
1723 static INLINE
unsigned int
1724 mode_from_disp_size (i386_operand_type t
)
1726 if (t
.bitfield
.disp8
)
1728 else if (t
.bitfield
.disp16
1729 || t
.bitfield
.disp32
1730 || t
.bitfield
.disp32s
)
1737 fits_in_signed_byte (offsetT num
)
1739 return (num
>= -128) && (num
<= 127);
1743 fits_in_unsigned_byte (offsetT num
)
1745 return (num
& 0xff) == num
;
1749 fits_in_unsigned_word (offsetT num
)
1751 return (num
& 0xffff) == num
;
1755 fits_in_signed_word (offsetT num
)
1757 return (-32768 <= num
) && (num
<= 32767);
1761 fits_in_signed_long (offsetT num ATTRIBUTE_UNUSED
)
1766 return (!(((offsetT
) -1 << 31) & num
)
1767 || (((offsetT
) -1 << 31) & num
) == ((offsetT
) -1 << 31));
1769 } /* fits_in_signed_long() */
1772 fits_in_unsigned_long (offsetT num ATTRIBUTE_UNUSED
)
1777 return (num
& (((offsetT
) 2 << 31) - 1)) == num
;
1779 } /* fits_in_unsigned_long() */
1782 fits_in_imm4 (offsetT num
)
1784 return (num
& 0xf) == num
;
1787 static i386_operand_type
1788 smallest_imm_type (offsetT num
)
1790 i386_operand_type t
;
1792 operand_type_set (&t
, 0);
1793 t
.bitfield
.imm64
= 1;
1795 if (cpu_arch_tune
!= PROCESSOR_I486
&& num
== 1)
1797 /* This code is disabled on the 486 because all the Imm1 forms
1798 in the opcode table are slower on the i486. They're the
1799 versions with the implicitly specified single-position
1800 displacement, which has another syntax if you really want to
1802 t
.bitfield
.imm1
= 1;
1803 t
.bitfield
.imm8
= 1;
1804 t
.bitfield
.imm8s
= 1;
1805 t
.bitfield
.imm16
= 1;
1806 t
.bitfield
.imm32
= 1;
1807 t
.bitfield
.imm32s
= 1;
1809 else if (fits_in_signed_byte (num
))
1811 t
.bitfield
.imm8
= 1;
1812 t
.bitfield
.imm8s
= 1;
1813 t
.bitfield
.imm16
= 1;
1814 t
.bitfield
.imm32
= 1;
1815 t
.bitfield
.imm32s
= 1;
1817 else if (fits_in_unsigned_byte (num
))
1819 t
.bitfield
.imm8
= 1;
1820 t
.bitfield
.imm16
= 1;
1821 t
.bitfield
.imm32
= 1;
1822 t
.bitfield
.imm32s
= 1;
1824 else if (fits_in_signed_word (num
) || fits_in_unsigned_word (num
))
1826 t
.bitfield
.imm16
= 1;
1827 t
.bitfield
.imm32
= 1;
1828 t
.bitfield
.imm32s
= 1;
1830 else if (fits_in_signed_long (num
))
1832 t
.bitfield
.imm32
= 1;
1833 t
.bitfield
.imm32s
= 1;
1835 else if (fits_in_unsigned_long (num
))
1836 t
.bitfield
.imm32
= 1;
1842 offset_in_range (offsetT val
, int size
)
1848 case 1: mask
= ((addressT
) 1 << 8) - 1; break;
1849 case 2: mask
= ((addressT
) 1 << 16) - 1; break;
1850 case 4: mask
= ((addressT
) 2 << 31) - 1; break;
1852 case 8: mask
= ((addressT
) 2 << 63) - 1; break;
1858 /* If BFD64, sign extend val for 32bit address mode. */
1859 if (flag_code
!= CODE_64BIT
1860 || i
.prefix
[ADDR_PREFIX
])
1861 if ((val
& ~(((addressT
) 2 << 31) - 1)) == 0)
1862 val
= (val
^ ((addressT
) 1 << 31)) - ((addressT
) 1 << 31);
1865 if ((val
& ~mask
) != 0 && (val
& ~mask
) != ~mask
)
1867 char buf1
[40], buf2
[40];
1869 sprint_value (buf1
, val
);
1870 sprint_value (buf2
, val
& mask
);
1871 as_warn (_("%s shortened to %s"), buf1
, buf2
);
1885 a. PREFIX_EXIST if attempting to add a prefix where one from the
1886 same class already exists.
1887 b. PREFIX_LOCK if lock prefix is added.
1888 c. PREFIX_REP if rep/repne prefix is added.
1889 d. PREFIX_OTHER if other prefix is added.
1892 static enum PREFIX_GROUP
1893 add_prefix (unsigned int prefix
)
1895 enum PREFIX_GROUP ret
= PREFIX_OTHER
;
1898 if (prefix
>= REX_OPCODE
&& prefix
< REX_OPCODE
+ 16
1899 && flag_code
== CODE_64BIT
)
1901 if ((i
.prefix
[REX_PREFIX
] & prefix
& REX_W
)
1902 || ((i
.prefix
[REX_PREFIX
] & (REX_R
| REX_X
| REX_B
))
1903 && (prefix
& (REX_R
| REX_X
| REX_B
))))
1914 case CS_PREFIX_OPCODE
:
1915 case DS_PREFIX_OPCODE
:
1916 case ES_PREFIX_OPCODE
:
1917 case FS_PREFIX_OPCODE
:
1918 case GS_PREFIX_OPCODE
:
1919 case SS_PREFIX_OPCODE
:
1923 case REPNE_PREFIX_OPCODE
:
1924 case REPE_PREFIX_OPCODE
:
1929 case LOCK_PREFIX_OPCODE
:
1938 case ADDR_PREFIX_OPCODE
:
1942 case DATA_PREFIX_OPCODE
:
1946 if (i
.prefix
[q
] != 0)
1954 i
.prefix
[q
] |= prefix
;
1957 as_bad (_("same type of prefix used twice"));
1963 update_code_flag (int value
, int check
)
1965 PRINTF_LIKE ((*as_error
));
1967 flag_code
= (enum flag_code
) value
;
1968 if (flag_code
== CODE_64BIT
)
1970 cpu_arch_flags
.bitfield
.cpu64
= 1;
1971 cpu_arch_flags
.bitfield
.cpuno64
= 0;
1975 cpu_arch_flags
.bitfield
.cpu64
= 0;
1976 cpu_arch_flags
.bitfield
.cpuno64
= 1;
1978 if (value
== CODE_64BIT
&& !cpu_arch_flags
.bitfield
.cpulm
)
1981 as_error
= as_fatal
;
1984 (*as_error
) (_("64bit mode not supported on `%s'."),
1985 cpu_arch_name
? cpu_arch_name
: default_arch
);
1987 if (value
== CODE_32BIT
&& !cpu_arch_flags
.bitfield
.cpui386
)
1990 as_error
= as_fatal
;
1993 (*as_error
) (_("32bit mode not supported on `%s'."),
1994 cpu_arch_name
? cpu_arch_name
: default_arch
);
1996 stackop_size
= '\0';
2000 set_code_flag (int value
)
2002 update_code_flag (value
, 0);
2006 set_16bit_gcc_code_flag (int new_code_flag
)
2008 flag_code
= (enum flag_code
) new_code_flag
;
2009 if (flag_code
!= CODE_16BIT
)
2011 cpu_arch_flags
.bitfield
.cpu64
= 0;
2012 cpu_arch_flags
.bitfield
.cpuno64
= 1;
2013 stackop_size
= LONG_MNEM_SUFFIX
;
2017 set_intel_syntax (int syntax_flag
)
2019 /* Find out if register prefixing is specified. */
2020 int ask_naked_reg
= 0;
2023 if (!is_end_of_line
[(unsigned char) *input_line_pointer
])
2025 char *string
= input_line_pointer
;
2026 int e
= get_symbol_end ();
2028 if (strcmp (string
, "prefix") == 0)
2030 else if (strcmp (string
, "noprefix") == 0)
2033 as_bad (_("bad argument to syntax directive."));
2034 *input_line_pointer
= e
;
2036 demand_empty_rest_of_line ();
2038 intel_syntax
= syntax_flag
;
2040 if (ask_naked_reg
== 0)
2041 allow_naked_reg
= (intel_syntax
2042 && (bfd_get_symbol_leading_char (stdoutput
) != '\0'));
2044 allow_naked_reg
= (ask_naked_reg
< 0);
2046 expr_set_rank (O_full_ptr
, syntax_flag
? 10 : 0);
2048 identifier_chars
['%'] = intel_syntax
&& allow_naked_reg
? '%' : 0;
2049 identifier_chars
['$'] = intel_syntax
? '$' : 0;
2050 register_prefix
= allow_naked_reg
? "" : "%";
2054 set_intel_mnemonic (int mnemonic_flag
)
2056 intel_mnemonic
= mnemonic_flag
;
2060 set_allow_index_reg (int flag
)
2062 allow_index_reg
= flag
;
2066 set_sse_check (int dummy ATTRIBUTE_UNUSED
)
2070 if (!is_end_of_line
[(unsigned char) *input_line_pointer
])
2072 char *string
= input_line_pointer
;
2073 int e
= get_symbol_end ();
2075 if (strcmp (string
, "none") == 0)
2076 sse_check
= sse_check_none
;
2077 else if (strcmp (string
, "warning") == 0)
2078 sse_check
= sse_check_warning
;
2079 else if (strcmp (string
, "error") == 0)
2080 sse_check
= sse_check_error
;
2082 as_bad (_("bad argument to sse_check directive."));
2083 *input_line_pointer
= e
;
2086 as_bad (_("missing argument for sse_check directive"));
2088 demand_empty_rest_of_line ();
2092 check_cpu_arch_compatible (const char *name ATTRIBUTE_UNUSED
,
2093 i386_cpu_flags new_flag ATTRIBUTE_UNUSED
)
2095 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
2096 static const char *arch
;
2098 /* Intel LIOM is only supported on ELF. */
2104 /* Use cpu_arch_name if it is set in md_parse_option. Otherwise
2105 use default_arch. */
2106 arch
= cpu_arch_name
;
2108 arch
= default_arch
;
2111 /* If we are targeting Intel L1OM, we must enable it. */
2112 if (get_elf_backend_data (stdoutput
)->elf_machine_code
!= EM_L1OM
2113 || new_flag
.bitfield
.cpul1om
)
2116 as_bad (_("`%s' is not supported on `%s'"), name
, arch
);
2121 set_cpu_arch (int dummy ATTRIBUTE_UNUSED
)
2125 if (!is_end_of_line
[(unsigned char) *input_line_pointer
])
2127 char *string
= input_line_pointer
;
2128 int e
= get_symbol_end ();
2130 i386_cpu_flags flags
;
2132 for (j
= 0; j
< ARRAY_SIZE (cpu_arch
); j
++)
2134 if (strcmp (string
, cpu_arch
[j
].name
) == 0)
2136 check_cpu_arch_compatible (string
, cpu_arch
[j
].flags
);
2140 cpu_arch_name
= cpu_arch
[j
].name
;
2141 cpu_sub_arch_name
= NULL
;
2142 cpu_arch_flags
= cpu_arch
[j
].flags
;
2143 if (flag_code
== CODE_64BIT
)
2145 cpu_arch_flags
.bitfield
.cpu64
= 1;
2146 cpu_arch_flags
.bitfield
.cpuno64
= 0;
2150 cpu_arch_flags
.bitfield
.cpu64
= 0;
2151 cpu_arch_flags
.bitfield
.cpuno64
= 1;
2153 cpu_arch_isa
= cpu_arch
[j
].type
;
2154 cpu_arch_isa_flags
= cpu_arch
[j
].flags
;
2155 if (!cpu_arch_tune_set
)
2157 cpu_arch_tune
= cpu_arch_isa
;
2158 cpu_arch_tune_flags
= cpu_arch_isa_flags
;
2163 if (!cpu_arch
[j
].negated
)
2164 flags
= cpu_flags_or (cpu_arch_flags
,
2167 flags
= cpu_flags_and_not (cpu_arch_flags
,
2169 if (!cpu_flags_equal (&flags
, &cpu_arch_flags
))
2171 if (cpu_sub_arch_name
)
2173 char *name
= cpu_sub_arch_name
;
2174 cpu_sub_arch_name
= concat (name
,
2176 (const char *) NULL
);
2180 cpu_sub_arch_name
= xstrdup (cpu_arch
[j
].name
);
2181 cpu_arch_flags
= flags
;
2182 cpu_arch_isa_flags
= flags
;
2184 *input_line_pointer
= e
;
2185 demand_empty_rest_of_line ();
2189 if (j
>= ARRAY_SIZE (cpu_arch
))
2190 as_bad (_("no such architecture: `%s'"), string
);
2192 *input_line_pointer
= e
;
2195 as_bad (_("missing cpu architecture"));
2197 no_cond_jump_promotion
= 0;
2198 if (*input_line_pointer
== ','
2199 && !is_end_of_line
[(unsigned char) input_line_pointer
[1]])
2201 char *string
= ++input_line_pointer
;
2202 int e
= get_symbol_end ();
2204 if (strcmp (string
, "nojumps") == 0)
2205 no_cond_jump_promotion
= 1;
2206 else if (strcmp (string
, "jumps") == 0)
2209 as_bad (_("no such architecture modifier: `%s'"), string
);
2211 *input_line_pointer
= e
;
2214 demand_empty_rest_of_line ();
2217 enum bfd_architecture
2220 if (cpu_arch_isa
== PROCESSOR_L1OM
)
2222 if (OUTPUT_FLAVOR
!= bfd_target_elf_flavour
2223 || flag_code
!= CODE_64BIT
)
2224 as_fatal (_("Intel L1OM is 64bit ELF only"));
2225 return bfd_arch_l1om
;
2228 return bfd_arch_i386
;
2234 if (!strncmp (default_arch
, "x86_64", 6))
2236 if (cpu_arch_isa
== PROCESSOR_L1OM
)
2238 if (OUTPUT_FLAVOR
!= bfd_target_elf_flavour
2239 || default_arch
[6] != '\0')
2240 as_fatal (_("Intel L1OM is 64bit ELF only"));
2241 return bfd_mach_l1om
;
2243 else if (default_arch
[6] == '\0')
2244 return bfd_mach_x86_64
;
2246 return bfd_mach_x64_32
;
2248 else if (!strcmp (default_arch
, "i386"))
2249 return bfd_mach_i386_i386
;
2251 as_fatal (_("Unknown architecture"));
2257 const char *hash_err
;
2259 /* Initialize op_hash hash table. */
2260 op_hash
= hash_new ();
2263 const insn_template
*optab
;
2264 templates
*core_optab
;
2266 /* Setup for loop. */
2268 core_optab
= (templates
*) xmalloc (sizeof (templates
));
2269 core_optab
->start
= optab
;
2274 if (optab
->name
== NULL
2275 || strcmp (optab
->name
, (optab
- 1)->name
) != 0)
2277 /* different name --> ship out current template list;
2278 add to hash table; & begin anew. */
2279 core_optab
->end
= optab
;
2280 hash_err
= hash_insert (op_hash
,
2282 (void *) core_optab
);
2285 as_fatal (_("Internal Error: Can't hash %s: %s"),
2289 if (optab
->name
== NULL
)
2291 core_optab
= (templates
*) xmalloc (sizeof (templates
));
2292 core_optab
->start
= optab
;
2297 /* Initialize reg_hash hash table. */
2298 reg_hash
= hash_new ();
2300 const reg_entry
*regtab
;
2301 unsigned int regtab_size
= i386_regtab_size
;
2303 for (regtab
= i386_regtab
; regtab_size
--; regtab
++)
2305 hash_err
= hash_insert (reg_hash
, regtab
->reg_name
, (void *) regtab
);
2307 as_fatal (_("Internal Error: Can't hash %s: %s"),
2313 /* Fill in lexical tables: mnemonic_chars, operand_chars. */
2318 for (c
= 0; c
< 256; c
++)
2323 mnemonic_chars
[c
] = c
;
2324 register_chars
[c
] = c
;
2325 operand_chars
[c
] = c
;
2327 else if (ISLOWER (c
))
2329 mnemonic_chars
[c
] = c
;
2330 register_chars
[c
] = c
;
2331 operand_chars
[c
] = c
;
2333 else if (ISUPPER (c
))
2335 mnemonic_chars
[c
] = TOLOWER (c
);
2336 register_chars
[c
] = mnemonic_chars
[c
];
2337 operand_chars
[c
] = c
;
2340 if (ISALPHA (c
) || ISDIGIT (c
))
2341 identifier_chars
[c
] = c
;
2344 identifier_chars
[c
] = c
;
2345 operand_chars
[c
] = c
;
2350 identifier_chars
['@'] = '@';
2353 identifier_chars
['?'] = '?';
2354 operand_chars
['?'] = '?';
2356 digit_chars
['-'] = '-';
2357 mnemonic_chars
['_'] = '_';
2358 mnemonic_chars
['-'] = '-';
2359 mnemonic_chars
['.'] = '.';
2360 identifier_chars
['_'] = '_';
2361 identifier_chars
['.'] = '.';
2363 for (p
= operand_special_chars
; *p
!= '\0'; p
++)
2364 operand_chars
[(unsigned char) *p
] = *p
;
2367 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
2370 record_alignment (text_section
, 2);
2371 record_alignment (data_section
, 2);
2372 record_alignment (bss_section
, 2);
2376 if (flag_code
== CODE_64BIT
)
2378 #if defined (OBJ_COFF) && defined (TE_PE)
2379 x86_dwarf2_return_column
= (OUTPUT_FLAVOR
== bfd_target_coff_flavour
2382 x86_dwarf2_return_column
= 16;
2384 x86_cie_data_alignment
= -8;
2388 x86_dwarf2_return_column
= 8;
2389 x86_cie_data_alignment
= -4;
2394 i386_print_statistics (FILE *file
)
2396 hash_print_statistics (file
, "i386 opcode", op_hash
);
2397 hash_print_statistics (file
, "i386 register", reg_hash
);
2402 /* Debugging routines for md_assemble. */
2403 static void pte (insn_template
*);
2404 static void pt (i386_operand_type
);
2405 static void pe (expressionS
*);
2406 static void ps (symbolS
*);
2409 pi (char *line
, i386_insn
*x
)
2413 fprintf (stdout
, "%s: template ", line
);
2415 fprintf (stdout
, " address: base %s index %s scale %x\n",
2416 x
->base_reg
? x
->base_reg
->reg_name
: "none",
2417 x
->index_reg
? x
->index_reg
->reg_name
: "none",
2418 x
->log2_scale_factor
);
2419 fprintf (stdout
, " modrm: mode %x reg %x reg/mem %x\n",
2420 x
->rm
.mode
, x
->rm
.reg
, x
->rm
.regmem
);
2421 fprintf (stdout
, " sib: base %x index %x scale %x\n",
2422 x
->sib
.base
, x
->sib
.index
, x
->sib
.scale
);
2423 fprintf (stdout
, " rex: 64bit %x extX %x extY %x extZ %x\n",
2424 (x
->rex
& REX_W
) != 0,
2425 (x
->rex
& REX_R
) != 0,
2426 (x
->rex
& REX_X
) != 0,
2427 (x
->rex
& REX_B
) != 0);
2428 for (j
= 0; j
< x
->operands
; j
++)
2430 fprintf (stdout
, " #%d: ", j
+ 1);
2432 fprintf (stdout
, "\n");
2433 if (x
->types
[j
].bitfield
.reg8
2434 || x
->types
[j
].bitfield
.reg16
2435 || x
->types
[j
].bitfield
.reg32
2436 || x
->types
[j
].bitfield
.reg64
2437 || x
->types
[j
].bitfield
.regmmx
2438 || x
->types
[j
].bitfield
.regxmm
2439 || x
->types
[j
].bitfield
.regymm
2440 || x
->types
[j
].bitfield
.sreg2
2441 || x
->types
[j
].bitfield
.sreg3
2442 || x
->types
[j
].bitfield
.control
2443 || x
->types
[j
].bitfield
.debug
2444 || x
->types
[j
].bitfield
.test
)
2445 fprintf (stdout
, "%s\n", x
->op
[j
].regs
->reg_name
);
2446 if (operand_type_check (x
->types
[j
], imm
))
2448 if (operand_type_check (x
->types
[j
], disp
))
2449 pe (x
->op
[j
].disps
);
2454 pte (insn_template
*t
)
2457 fprintf (stdout
, " %d operands ", t
->operands
);
2458 fprintf (stdout
, "opcode %x ", t
->base_opcode
);
2459 if (t
->extension_opcode
!= None
)
2460 fprintf (stdout
, "ext %x ", t
->extension_opcode
);
2461 if (t
->opcode_modifier
.d
)
2462 fprintf (stdout
, "D");
2463 if (t
->opcode_modifier
.w
)
2464 fprintf (stdout
, "W");
2465 fprintf (stdout
, "\n");
2466 for (j
= 0; j
< t
->operands
; j
++)
2468 fprintf (stdout
, " #%d type ", j
+ 1);
2469 pt (t
->operand_types
[j
]);
2470 fprintf (stdout
, "\n");
2477 fprintf (stdout
, " operation %d\n", e
->X_op
);
2478 fprintf (stdout
, " add_number %ld (%lx)\n",
2479 (long) e
->X_add_number
, (long) e
->X_add_number
);
2480 if (e
->X_add_symbol
)
2482 fprintf (stdout
, " add_symbol ");
2483 ps (e
->X_add_symbol
);
2484 fprintf (stdout
, "\n");
2488 fprintf (stdout
, " op_symbol ");
2489 ps (e
->X_op_symbol
);
2490 fprintf (stdout
, "\n");
2497 fprintf (stdout
, "%s type %s%s",
2499 S_IS_EXTERNAL (s
) ? "EXTERNAL " : "",
2500 segment_name (S_GET_SEGMENT (s
)));
2503 static struct type_name
2505 i386_operand_type mask
;
2508 const type_names
[] =
2510 { OPERAND_TYPE_REG8
, "r8" },
2511 { OPERAND_TYPE_REG16
, "r16" },
2512 { OPERAND_TYPE_REG32
, "r32" },
2513 { OPERAND_TYPE_REG64
, "r64" },
2514 { OPERAND_TYPE_IMM8
, "i8" },
2515 { OPERAND_TYPE_IMM8
, "i8s" },
2516 { OPERAND_TYPE_IMM16
, "i16" },
2517 { OPERAND_TYPE_IMM32
, "i32" },
2518 { OPERAND_TYPE_IMM32S
, "i32s" },
2519 { OPERAND_TYPE_IMM64
, "i64" },
2520 { OPERAND_TYPE_IMM1
, "i1" },
2521 { OPERAND_TYPE_BASEINDEX
, "BaseIndex" },
2522 { OPERAND_TYPE_DISP8
, "d8" },
2523 { OPERAND_TYPE_DISP16
, "d16" },
2524 { OPERAND_TYPE_DISP32
, "d32" },
2525 { OPERAND_TYPE_DISP32S
, "d32s" },
2526 { OPERAND_TYPE_DISP64
, "d64" },
2527 { OPERAND_TYPE_INOUTPORTREG
, "InOutPortReg" },
2528 { OPERAND_TYPE_SHIFTCOUNT
, "ShiftCount" },
2529 { OPERAND_TYPE_CONTROL
, "control reg" },
2530 { OPERAND_TYPE_TEST
, "test reg" },
2531 { OPERAND_TYPE_DEBUG
, "debug reg" },
2532 { OPERAND_TYPE_FLOATREG
, "FReg" },
2533 { OPERAND_TYPE_FLOATACC
, "FAcc" },
2534 { OPERAND_TYPE_SREG2
, "SReg2" },
2535 { OPERAND_TYPE_SREG3
, "SReg3" },
2536 { OPERAND_TYPE_ACC
, "Acc" },
2537 { OPERAND_TYPE_JUMPABSOLUTE
, "Jump Absolute" },
2538 { OPERAND_TYPE_REGMMX
, "rMMX" },
2539 { OPERAND_TYPE_REGXMM
, "rXMM" },
2540 { OPERAND_TYPE_REGYMM
, "rYMM" },
2541 { OPERAND_TYPE_ESSEG
, "es" },
2545 pt (i386_operand_type t
)
2548 i386_operand_type a
;
2550 for (j
= 0; j
< ARRAY_SIZE (type_names
); j
++)
2552 a
= operand_type_and (t
, type_names
[j
].mask
);
2553 if (!operand_type_all_zero (&a
))
2554 fprintf (stdout
, "%s, ", type_names
[j
].name
);
2559 #endif /* DEBUG386 */
2561 static bfd_reloc_code_real_type
2562 reloc (unsigned int size
,
2565 bfd_reloc_code_real_type other
)
2567 if (other
!= NO_RELOC
)
2569 reloc_howto_type
*rel
;
2574 case BFD_RELOC_X86_64_GOT32
:
2575 return BFD_RELOC_X86_64_GOT64
;
2577 case BFD_RELOC_X86_64_PLTOFF64
:
2578 return BFD_RELOC_X86_64_PLTOFF64
;
2580 case BFD_RELOC_X86_64_GOTPC32
:
2581 other
= BFD_RELOC_X86_64_GOTPC64
;
2583 case BFD_RELOC_X86_64_GOTPCREL
:
2584 other
= BFD_RELOC_X86_64_GOTPCREL64
;
2586 case BFD_RELOC_X86_64_TPOFF32
:
2587 other
= BFD_RELOC_X86_64_TPOFF64
;
2589 case BFD_RELOC_X86_64_DTPOFF32
:
2590 other
= BFD_RELOC_X86_64_DTPOFF64
;
2596 /* Sign-checking 4-byte relocations in 16-/32-bit code is pointless. */
2597 if (size
== 4 && (flag_code
!= CODE_64BIT
|| disallow_64bit_reloc
))
2600 rel
= bfd_reloc_type_lookup (stdoutput
, other
);
2602 as_bad (_("unknown relocation (%u)"), other
);
2603 else if (size
!= bfd_get_reloc_size (rel
))
2604 as_bad (_("%u-byte relocation cannot be applied to %u-byte field"),
2605 bfd_get_reloc_size (rel
),
2607 else if (pcrel
&& !rel
->pc_relative
)
2608 as_bad (_("non-pc-relative relocation for pc-relative field"));
2609 else if ((rel
->complain_on_overflow
== complain_overflow_signed
2611 || (rel
->complain_on_overflow
== complain_overflow_unsigned
2613 as_bad (_("relocated field and relocation type differ in signedness"));
2622 as_bad (_("there are no unsigned pc-relative relocations"));
2625 case 1: return BFD_RELOC_8_PCREL
;
2626 case 2: return BFD_RELOC_16_PCREL
;
2627 case 4: return BFD_RELOC_32_PCREL
;
2628 case 8: return BFD_RELOC_64_PCREL
;
2630 as_bad (_("cannot do %u byte pc-relative relocation"), size
);
2637 case 4: return BFD_RELOC_X86_64_32S
;
2642 case 1: return BFD_RELOC_8
;
2643 case 2: return BFD_RELOC_16
;
2644 case 4: return BFD_RELOC_32
;
2645 case 8: return BFD_RELOC_64
;
2647 as_bad (_("cannot do %s %u byte relocation"),
2648 sign
> 0 ? "signed" : "unsigned", size
);
2654 /* Here we decide which fixups can be adjusted to make them relative to
2655 the beginning of the section instead of the symbol. Basically we need
2656 to make sure that the dynamic relocations are done correctly, so in
2657 some cases we force the original symbol to be used. */
2660 tc_i386_fix_adjustable (fixS
*fixP ATTRIBUTE_UNUSED
)
2662 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
2666 /* Don't adjust pc-relative references to merge sections in 64-bit
2668 if (use_rela_relocations
2669 && (S_GET_SEGMENT (fixP
->fx_addsy
)->flags
& SEC_MERGE
) != 0
2673 /* The x86_64 GOTPCREL are represented as 32bit PCrel relocations
2674 and changed later by validate_fix. */
2675 if (GOT_symbol
&& fixP
->fx_subsy
== GOT_symbol
2676 && fixP
->fx_r_type
== BFD_RELOC_32_PCREL
)
2679 /* adjust_reloc_syms doesn't know about the GOT. */
2680 if (fixP
->fx_r_type
== BFD_RELOC_386_GOTOFF
2681 || fixP
->fx_r_type
== BFD_RELOC_386_PLT32
2682 || fixP
->fx_r_type
== BFD_RELOC_386_GOT32
2683 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_GD
2684 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_LDM
2685 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_LDO_32
2686 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_IE_32
2687 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_IE
2688 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_GOTIE
2689 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_LE_32
2690 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_LE
2691 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_GOTDESC
2692 || fixP
->fx_r_type
== BFD_RELOC_386_TLS_DESC_CALL
2693 || fixP
->fx_r_type
== BFD_RELOC_X86_64_PLT32
2694 || fixP
->fx_r_type
== BFD_RELOC_X86_64_GOT32
2695 || fixP
->fx_r_type
== BFD_RELOC_X86_64_GOTPCREL
2696 || fixP
->fx_r_type
== BFD_RELOC_X86_64_TLSGD
2697 || fixP
->fx_r_type
== BFD_RELOC_X86_64_TLSLD
2698 || fixP
->fx_r_type
== BFD_RELOC_X86_64_DTPOFF32
2699 || fixP
->fx_r_type
== BFD_RELOC_X86_64_DTPOFF64
2700 || fixP
->fx_r_type
== BFD_RELOC_X86_64_GOTTPOFF
2701 || fixP
->fx_r_type
== BFD_RELOC_X86_64_TPOFF32
2702 || fixP
->fx_r_type
== BFD_RELOC_X86_64_TPOFF64
2703 || fixP
->fx_r_type
== BFD_RELOC_X86_64_GOTOFF64
2704 || fixP
->fx_r_type
== BFD_RELOC_X86_64_GOTPC32_TLSDESC
2705 || fixP
->fx_r_type
== BFD_RELOC_X86_64_TLSDESC_CALL
2706 || fixP
->fx_r_type
== BFD_RELOC_VTABLE_INHERIT
2707 || fixP
->fx_r_type
== BFD_RELOC_VTABLE_ENTRY
)
2714 intel_float_operand (const char *mnemonic
)
2716 /* Note that the value returned is meaningful only for opcodes with (memory)
2717 operands, hence the code here is free to improperly handle opcodes that
2718 have no operands (for better performance and smaller code). */
2720 if (mnemonic
[0] != 'f')
2721 return 0; /* non-math */
2723 switch (mnemonic
[1])
2725 /* fclex, fdecstp, fdisi, femms, feni, fincstp, finit, fsetpm, and
2726 the fs segment override prefix not currently handled because no
2727 call path can make opcodes without operands get here */
2729 return 2 /* integer op */;
2731 if (mnemonic
[2] == 'd' && (mnemonic
[3] == 'c' || mnemonic
[3] == 'e'))
2732 return 3; /* fldcw/fldenv */
2735 if (mnemonic
[2] != 'o' /* fnop */)
2736 return 3; /* non-waiting control op */
2739 if (mnemonic
[2] == 's')
2740 return 3; /* frstor/frstpm */
2743 if (mnemonic
[2] == 'a')
2744 return 3; /* fsave */
2745 if (mnemonic
[2] == 't')
2747 switch (mnemonic
[3])
2749 case 'c': /* fstcw */
2750 case 'd': /* fstdw */
2751 case 'e': /* fstenv */
2752 case 's': /* fsts[gw] */
2758 if (mnemonic
[2] == 'r' || mnemonic
[2] == 's')
2759 return 0; /* fxsave/fxrstor are not really math ops */
2766 /* Build the VEX prefix. */
2769 build_vex_prefix (const insn_template
*t
)
2771 unsigned int register_specifier
;
2772 unsigned int implied_prefix
;
2773 unsigned int vector_length
;
2775 /* Check register specifier. */
2776 if (i
.vex
.register_specifier
)
2778 register_specifier
= i
.vex
.register_specifier
->reg_num
;
2779 if ((i
.vex
.register_specifier
->reg_flags
& RegRex
))
2780 register_specifier
+= 8;
2781 register_specifier
= ~register_specifier
& 0xf;
2784 register_specifier
= 0xf;
2786 /* Use 2-byte VEX prefix by swappping destination and source
2789 && i
.operands
== i
.reg_operands
2790 && i
.tm
.opcode_modifier
.vexopcode
== VEX0F
2791 && i
.tm
.opcode_modifier
.s
2794 unsigned int xchg
= i
.operands
- 1;
2795 union i386_op temp_op
;
2796 i386_operand_type temp_type
;
2798 temp_type
= i
.types
[xchg
];
2799 i
.types
[xchg
] = i
.types
[0];
2800 i
.types
[0] = temp_type
;
2801 temp_op
= i
.op
[xchg
];
2802 i
.op
[xchg
] = i
.op
[0];
2805 gas_assert (i
.rm
.mode
== 3);
2809 i
.rm
.regmem
= i
.rm
.reg
;
2812 /* Use the next insn. */
2816 if (i
.tm
.opcode_modifier
.vex
== VEXScalar
)
2817 vector_length
= avxscalar
;
2819 vector_length
= i
.tm
.opcode_modifier
.vex
== VEX256
? 1 : 0;
2821 switch ((i
.tm
.base_opcode
>> 8) & 0xff)
2826 case DATA_PREFIX_OPCODE
:
2829 case REPE_PREFIX_OPCODE
:
2832 case REPNE_PREFIX_OPCODE
:
2839 /* Use 2-byte VEX prefix if possible. */
2840 if (i
.tm
.opcode_modifier
.vexopcode
== VEX0F
2841 && i
.tm
.opcode_modifier
.vexw
!= VEXW1
2842 && (i
.rex
& (REX_W
| REX_X
| REX_B
)) == 0)
2844 /* 2-byte VEX prefix. */
2848 i
.vex
.bytes
[0] = 0xc5;
2850 /* Check the REX.R bit. */
2851 r
= (i
.rex
& REX_R
) ? 0 : 1;
2852 i
.vex
.bytes
[1] = (r
<< 7
2853 | register_specifier
<< 3
2854 | vector_length
<< 2
2859 /* 3-byte VEX prefix. */
2864 switch (i
.tm
.opcode_modifier
.vexopcode
)
2868 i
.vex
.bytes
[0] = 0xc4;
2872 i
.vex
.bytes
[0] = 0xc4;
2876 i
.vex
.bytes
[0] = 0xc4;
2880 i
.vex
.bytes
[0] = 0x8f;
2884 i
.vex
.bytes
[0] = 0x8f;
2888 i
.vex
.bytes
[0] = 0x8f;
2894 /* The high 3 bits of the second VEX byte are 1's compliment
2895 of RXB bits from REX. */
2896 i
.vex
.bytes
[1] = (~i
.rex
& 0x7) << 5 | m
;
2898 /* Check the REX.W bit. */
2899 w
= (i
.rex
& REX_W
) ? 1 : 0;
2900 if (i
.tm
.opcode_modifier
.vexw
)
2905 if (i
.tm
.opcode_modifier
.vexw
== VEXW1
)
2909 i
.vex
.bytes
[2] = (w
<< 7
2910 | register_specifier
<< 3
2911 | vector_length
<< 2
2917 process_immext (void)
2921 if (i
.tm
.cpu_flags
.bitfield
.cpusse3
&& i
.operands
> 0)
2923 /* SSE3 Instructions have the fixed operands with an opcode
2924 suffix which is coded in the same place as an 8-bit immediate
2925 field would be. Here we check those operands and remove them
2929 for (x
= 0; x
< i
.operands
; x
++)
2930 if (i
.op
[x
].regs
->reg_num
!= x
)
2931 as_bad (_("can't use register '%s%s' as operand %d in '%s'."),
2932 register_prefix
, i
.op
[x
].regs
->reg_name
, x
+ 1,
2938 /* These AMD 3DNow! and SSE2 instructions have an opcode suffix
2939 which is coded in the same place as an 8-bit immediate field
2940 would be. Here we fake an 8-bit immediate operand from the
2941 opcode suffix stored in tm.extension_opcode.
2943 AVX instructions also use this encoding, for some of
2944 3 argument instructions. */
2946 gas_assert (i
.imm_operands
== 0
2948 || (i
.tm
.opcode_modifier
.vex
2949 && i
.operands
<= 4)));
2951 exp
= &im_expressions
[i
.imm_operands
++];
2952 i
.op
[i
.operands
].imms
= exp
;
2953 i
.types
[i
.operands
] = imm8
;
2955 exp
->X_op
= O_constant
;
2956 exp
->X_add_number
= i
.tm
.extension_opcode
;
2957 i
.tm
.extension_opcode
= None
;
2960 /* This is the guts of the machine-dependent assembler. LINE points to a
2961 machine dependent instruction. This function is supposed to emit
2962 the frags/bytes it assembles to. */
2965 md_assemble (char *line
)
2968 char mnemonic
[MAX_MNEM_SIZE
];
2969 const insn_template
*t
;
2971 /* Initialize globals. */
2972 memset (&i
, '\0', sizeof (i
));
2973 for (j
= 0; j
< MAX_OPERANDS
; j
++)
2974 i
.reloc
[j
] = NO_RELOC
;
2975 memset (disp_expressions
, '\0', sizeof (disp_expressions
));
2976 memset (im_expressions
, '\0', sizeof (im_expressions
));
2977 save_stack_p
= save_stack
;
2979 /* First parse an instruction mnemonic & call i386_operand for the operands.
2980 We assume that the scrubber has arranged it so that line[0] is the valid
2981 start of a (possibly prefixed) mnemonic. */
2983 line
= parse_insn (line
, mnemonic
);
2987 line
= parse_operands (line
, mnemonic
);
2992 /* Now we've parsed the mnemonic into a set of templates, and have the
2993 operands at hand. */
2995 /* All intel opcodes have reversed operands except for "bound" and
2996 "enter". We also don't reverse intersegment "jmp" and "call"
2997 instructions with 2 immediate operands so that the immediate segment
2998 precedes the offset, as it does when in AT&T mode. */
3001 && (strcmp (mnemonic
, "bound") != 0)
3002 && (strcmp (mnemonic
, "invlpga") != 0)
3003 && !(operand_type_check (i
.types
[0], imm
)
3004 && operand_type_check (i
.types
[1], imm
)))
3007 /* The order of the immediates should be reversed
3008 for 2 immediates extrq and insertq instructions */
3009 if (i
.imm_operands
== 2
3010 && (strcmp (mnemonic
, "extrq") == 0
3011 || strcmp (mnemonic
, "insertq") == 0))
3012 swap_2_operands (0, 1);
3017 /* Don't optimize displacement for movabs since it only takes 64bit
3020 && !i
.disp32_encoding
3021 && (flag_code
!= CODE_64BIT
3022 || strcmp (mnemonic
, "movabs") != 0))
3025 /* Next, we find a template that matches the given insn,
3026 making sure the overlap of the given operands types is consistent
3027 with the template operand types. */
3029 if (!(t
= match_template ()))
3032 if (sse_check
!= sse_check_none
3033 && !i
.tm
.opcode_modifier
.noavx
3034 && (i
.tm
.cpu_flags
.bitfield
.cpusse
3035 || i
.tm
.cpu_flags
.bitfield
.cpusse2
3036 || i
.tm
.cpu_flags
.bitfield
.cpusse3
3037 || i
.tm
.cpu_flags
.bitfield
.cpussse3
3038 || i
.tm
.cpu_flags
.bitfield
.cpusse4_1
3039 || i
.tm
.cpu_flags
.bitfield
.cpusse4_2
))
3041 (sse_check
== sse_check_warning
3043 : as_bad
) (_("SSE instruction `%s' is used"), i
.tm
.name
);
3046 /* Zap movzx and movsx suffix. The suffix has been set from
3047 "word ptr" or "byte ptr" on the source operand in Intel syntax
3048 or extracted from mnemonic in AT&T syntax. But we'll use
3049 the destination register to choose the suffix for encoding. */
3050 if ((i
.tm
.base_opcode
& ~9) == 0x0fb6)
3052 /* In Intel syntax, there must be a suffix. In AT&T syntax, if
3053 there is no suffix, the default will be byte extension. */
3054 if (i
.reg_operands
!= 2
3057 as_bad (_("ambiguous operand size for `%s'"), i
.tm
.name
);
3062 if (i
.tm
.opcode_modifier
.fwait
)
3063 if (!add_prefix (FWAIT_OPCODE
))
3066 /* Check for lock without a lockable instruction. Destination operand
3067 must be memory unless it is xchg (0x86). */
3068 if (i
.prefix
[LOCK_PREFIX
]
3069 && (!i
.tm
.opcode_modifier
.islockable
3070 || i
.mem_operands
== 0
3071 || (i
.tm
.base_opcode
!= 0x86
3072 && !operand_type_check (i
.types
[i
.operands
- 1], anymem
))))
3074 as_bad (_("expecting lockable instruction after `lock'"));
3078 /* Check string instruction segment overrides. */
3079 if (i
.tm
.opcode_modifier
.isstring
&& i
.mem_operands
!= 0)
3081 if (!check_string ())
3083 i
.disp_operands
= 0;
3086 if (!process_suffix ())
3089 /* Update operand types. */
3090 for (j
= 0; j
< i
.operands
; j
++)
3091 i
.types
[j
] = operand_type_and (i
.types
[j
], i
.tm
.operand_types
[j
]);
3093 /* Make still unresolved immediate matches conform to size of immediate
3094 given in i.suffix. */
3095 if (!finalize_imm ())
3098 if (i
.types
[0].bitfield
.imm1
)
3099 i
.imm_operands
= 0; /* kludge for shift insns. */
3101 /* We only need to check those implicit registers for instructions
3102 with 3 operands or less. */
3103 if (i
.operands
<= 3)
3104 for (j
= 0; j
< i
.operands
; j
++)
3105 if (i
.types
[j
].bitfield
.inoutportreg
3106 || i
.types
[j
].bitfield
.shiftcount
3107 || i
.types
[j
].bitfield
.acc
3108 || i
.types
[j
].bitfield
.floatacc
)
3111 /* ImmExt should be processed after SSE2AVX. */
3112 if (!i
.tm
.opcode_modifier
.sse2avx
3113 && i
.tm
.opcode_modifier
.immext
)
3116 /* For insns with operands there are more diddles to do to the opcode. */
3119 if (!process_operands ())
3122 else if (!quiet_warnings
&& i
.tm
.opcode_modifier
.ugh
)
3124 /* UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc. */
3125 as_warn (_("translating to `%sp'"), i
.tm
.name
);
3128 if (i
.tm
.opcode_modifier
.vex
)
3129 build_vex_prefix (t
);
3131 /* Handle conversion of 'int $3' --> special int3 insn. XOP or FMA4
3132 instructions may define INT_OPCODE as well, so avoid this corner
3133 case for those instructions that use MODRM. */
3134 if (i
.tm
.base_opcode
== INT_OPCODE
3135 && !i
.tm
.opcode_modifier
.modrm
3136 && i
.op
[0].imms
->X_add_number
== 3)
3138 i
.tm
.base_opcode
= INT3_OPCODE
;
3142 if ((i
.tm
.opcode_modifier
.jump
3143 || i
.tm
.opcode_modifier
.jumpbyte
3144 || i
.tm
.opcode_modifier
.jumpdword
)
3145 && i
.op
[0].disps
->X_op
== O_constant
)
3147 /* Convert "jmp constant" (and "call constant") to a jump (call) to
3148 the absolute address given by the constant. Since ix86 jumps and
3149 calls are pc relative, we need to generate a reloc. */
3150 i
.op
[0].disps
->X_add_symbol
= &abs_symbol
;
3151 i
.op
[0].disps
->X_op
= O_symbol
;
3154 if (i
.tm
.opcode_modifier
.rex64
)
3157 /* For 8 bit registers we need an empty rex prefix. Also if the
3158 instruction already has a prefix, we need to convert old
3159 registers to new ones. */
3161 if ((i
.types
[0].bitfield
.reg8
3162 && (i
.op
[0].regs
->reg_flags
& RegRex64
) != 0)
3163 || (i
.types
[1].bitfield
.reg8
3164 && (i
.op
[1].regs
->reg_flags
& RegRex64
) != 0)
3165 || ((i
.types
[0].bitfield
.reg8
3166 || i
.types
[1].bitfield
.reg8
)
3171 i
.rex
|= REX_OPCODE
;
3172 for (x
= 0; x
< 2; x
++)
3174 /* Look for 8 bit operand that uses old registers. */
3175 if (i
.types
[x
].bitfield
.reg8
3176 && (i
.op
[x
].regs
->reg_flags
& RegRex64
) == 0)
3178 /* In case it is "hi" register, give up. */
3179 if (i
.op
[x
].regs
->reg_num
> 3)
3180 as_bad (_("can't encode register '%s%s' in an "
3181 "instruction requiring REX prefix."),
3182 register_prefix
, i
.op
[x
].regs
->reg_name
);
3184 /* Otherwise it is equivalent to the extended register.
3185 Since the encoding doesn't change this is merely
3186 cosmetic cleanup for debug output. */
3188 i
.op
[x
].regs
= i
.op
[x
].regs
+ 8;
3194 add_prefix (REX_OPCODE
| i
.rex
);
3196 /* We are ready to output the insn. */
3201 parse_insn (char *line
, char *mnemonic
)
3204 char *token_start
= l
;
3207 const insn_template
*t
;
3210 /* Non-zero if we found a prefix only acceptable with string insns. */
3211 const char *expecting_string_instruction
= NULL
;
3216 while ((*mnem_p
= mnemonic_chars
[(unsigned char) *l
]) != 0)
3221 if (mnem_p
>= mnemonic
+ MAX_MNEM_SIZE
)
3223 as_bad (_("no such instruction: `%s'"), token_start
);
3228 if (!is_space_char (*l
)
3229 && *l
!= END_OF_INSN
3231 || (*l
!= PREFIX_SEPARATOR
3234 as_bad (_("invalid character %s in mnemonic"),
3235 output_invalid (*l
));
3238 if (token_start
== l
)
3240 if (!intel_syntax
&& *l
== PREFIX_SEPARATOR
)
3241 as_bad (_("expecting prefix; got nothing"));
3243 as_bad (_("expecting mnemonic; got nothing"));
3247 /* Look up instruction (or prefix) via hash table. */
3248 current_templates
= (const templates
*) hash_find (op_hash
, mnemonic
);
3250 if (*l
!= END_OF_INSN
3251 && (!is_space_char (*l
) || l
[1] != END_OF_INSN
)
3252 && current_templates
3253 && current_templates
->start
->opcode_modifier
.isprefix
)
3255 if (!cpu_flags_check_cpu64 (current_templates
->start
->cpu_flags
))
3257 as_bad ((flag_code
!= CODE_64BIT
3258 ? _("`%s' is only supported in 64-bit mode")
3259 : _("`%s' is not supported in 64-bit mode")),
3260 current_templates
->start
->name
);
3263 /* If we are in 16-bit mode, do not allow addr16 or data16.
3264 Similarly, in 32-bit mode, do not allow addr32 or data32. */
3265 if ((current_templates
->start
->opcode_modifier
.size16
3266 || current_templates
->start
->opcode_modifier
.size32
)
3267 && flag_code
!= CODE_64BIT
3268 && (current_templates
->start
->opcode_modifier
.size32
3269 ^ (flag_code
== CODE_16BIT
)))
3271 as_bad (_("redundant %s prefix"),
3272 current_templates
->start
->name
);
3275 /* Add prefix, checking for repeated prefixes. */
3276 switch (add_prefix (current_templates
->start
->base_opcode
))
3281 expecting_string_instruction
= current_templates
->start
->name
;
3286 /* Skip past PREFIX_SEPARATOR and reset token_start. */
3293 if (!current_templates
)
3295 /* Check if we should swap operand or force 32bit displacement in
3297 if (mnem_p
- 2 == dot_p
&& dot_p
[1] == 's')
3299 else if (mnem_p
- 4 == dot_p
3303 i
.disp32_encoding
= 1;
3308 current_templates
= (const templates
*) hash_find (op_hash
, mnemonic
);
3311 if (!current_templates
)
3314 /* See if we can get a match by trimming off a suffix. */
3317 case WORD_MNEM_SUFFIX
:
3318 if (intel_syntax
&& (intel_float_operand (mnemonic
) & 2))
3319 i
.suffix
= SHORT_MNEM_SUFFIX
;
3321 case BYTE_MNEM_SUFFIX
:
3322 case QWORD_MNEM_SUFFIX
:
3323 i
.suffix
= mnem_p
[-1];
3325 current_templates
= (const templates
*) hash_find (op_hash
,
3328 case SHORT_MNEM_SUFFIX
:
3329 case LONG_MNEM_SUFFIX
:
3332 i
.suffix
= mnem_p
[-1];
3334 current_templates
= (const templates
*) hash_find (op_hash
,
3343 if (intel_float_operand (mnemonic
) == 1)
3344 i
.suffix
= SHORT_MNEM_SUFFIX
;
3346 i
.suffix
= LONG_MNEM_SUFFIX
;
3348 current_templates
= (const templates
*) hash_find (op_hash
,
3353 if (!current_templates
)
3355 as_bad (_("no such instruction: `%s'"), token_start
);
3360 if (current_templates
->start
->opcode_modifier
.jump
3361 || current_templates
->start
->opcode_modifier
.jumpbyte
)
3363 /* Check for a branch hint. We allow ",pt" and ",pn" for
3364 predict taken and predict not taken respectively.
3365 I'm not sure that branch hints actually do anything on loop
3366 and jcxz insns (JumpByte) for current Pentium4 chips. They
3367 may work in the future and it doesn't hurt to accept them
3369 if (l
[0] == ',' && l
[1] == 'p')
3373 if (!add_prefix (DS_PREFIX_OPCODE
))
3377 else if (l
[2] == 'n')
3379 if (!add_prefix (CS_PREFIX_OPCODE
))
3385 /* Any other comma loses. */
3388 as_bad (_("invalid character %s in mnemonic"),
3389 output_invalid (*l
));
3393 /* Check if instruction is supported on specified architecture. */
3395 for (t
= current_templates
->start
; t
< current_templates
->end
; ++t
)
3397 supported
|= cpu_flags_match (t
);
3398 if (supported
== CPU_FLAGS_PERFECT_MATCH
)
3402 if (!(supported
& CPU_FLAGS_64BIT_MATCH
))
3404 as_bad (flag_code
== CODE_64BIT
3405 ? _("`%s' is not supported in 64-bit mode")
3406 : _("`%s' is only supported in 64-bit mode"),
3407 current_templates
->start
->name
);
3410 if (supported
!= CPU_FLAGS_PERFECT_MATCH
)
3412 as_bad (_("`%s' is not supported on `%s%s'"),
3413 current_templates
->start
->name
,
3414 cpu_arch_name
? cpu_arch_name
: default_arch
,
3415 cpu_sub_arch_name
? cpu_sub_arch_name
: "");
3420 if (!cpu_arch_flags
.bitfield
.cpui386
3421 && (flag_code
!= CODE_16BIT
))
3423 as_warn (_("use .code16 to ensure correct addressing mode"));
3426 /* Check for rep/repne without a string instruction. */
3427 if (expecting_string_instruction
)
3429 static templates override
;
3431 for (t
= current_templates
->start
; t
< current_templates
->end
; ++t
)
3432 if (t
->opcode_modifier
.isstring
)
3434 if (t
>= current_templates
->end
)
3436 as_bad (_("expecting string instruction after `%s'"),
3437 expecting_string_instruction
);
3440 for (override
.start
= t
; t
< current_templates
->end
; ++t
)
3441 if (!t
->opcode_modifier
.isstring
)
3444 current_templates
= &override
;
3451 parse_operands (char *l
, const char *mnemonic
)
3455 /* 1 if operand is pending after ','. */
3456 unsigned int expecting_operand
= 0;
3458 /* Non-zero if operand parens not balanced. */
3459 unsigned int paren_not_balanced
;
3461 while (*l
!= END_OF_INSN
)
3463 /* Skip optional white space before operand. */
3464 if (is_space_char (*l
))
3466 if (!is_operand_char (*l
) && *l
!= END_OF_INSN
)
3468 as_bad (_("invalid character %s before operand %d"),
3469 output_invalid (*l
),
3473 token_start
= l
; /* after white space */
3474 paren_not_balanced
= 0;
3475 while (paren_not_balanced
|| *l
!= ',')
3477 if (*l
== END_OF_INSN
)
3479 if (paren_not_balanced
)
3482 as_bad (_("unbalanced parenthesis in operand %d."),
3485 as_bad (_("unbalanced brackets in operand %d."),
3490 break; /* we are done */
3492 else if (!is_operand_char (*l
) && !is_space_char (*l
))
3494 as_bad (_("invalid character %s in operand %d"),
3495 output_invalid (*l
),
3502 ++paren_not_balanced
;
3504 --paren_not_balanced
;
3509 ++paren_not_balanced
;
3511 --paren_not_balanced
;
3515 if (l
!= token_start
)
3516 { /* Yes, we've read in another operand. */
3517 unsigned int operand_ok
;
3518 this_operand
= i
.operands
++;
3519 i
.types
[this_operand
].bitfield
.unspecified
= 1;
3520 if (i
.operands
> MAX_OPERANDS
)
3522 as_bad (_("spurious operands; (%d operands/instruction max)"),
3526 /* Now parse operand adding info to 'i' as we go along. */
3527 END_STRING_AND_SAVE (l
);
3531 i386_intel_operand (token_start
,
3532 intel_float_operand (mnemonic
));
3534 operand_ok
= i386_att_operand (token_start
);
3536 RESTORE_END_STRING (l
);
3542 if (expecting_operand
)
3544 expecting_operand_after_comma
:
3545 as_bad (_("expecting operand after ','; got nothing"));
3550 as_bad (_("expecting operand before ','; got nothing"));
3555 /* Now *l must be either ',' or END_OF_INSN. */
3558 if (*++l
== END_OF_INSN
)
3560 /* Just skip it, if it's \n complain. */
3561 goto expecting_operand_after_comma
;
3563 expecting_operand
= 1;
3570 swap_2_operands (int xchg1
, int xchg2
)
3572 union i386_op temp_op
;
3573 i386_operand_type temp_type
;
3574 enum bfd_reloc_code_real temp_reloc
;
3576 temp_type
= i
.types
[xchg2
];
3577 i
.types
[xchg2
] = i
.types
[xchg1
];
3578 i
.types
[xchg1
] = temp_type
;
3579 temp_op
= i
.op
[xchg2
];
3580 i
.op
[xchg2
] = i
.op
[xchg1
];
3581 i
.op
[xchg1
] = temp_op
;
3582 temp_reloc
= i
.reloc
[xchg2
];
3583 i
.reloc
[xchg2
] = i
.reloc
[xchg1
];
3584 i
.reloc
[xchg1
] = temp_reloc
;
3588 swap_operands (void)
3594 swap_2_operands (1, i
.operands
- 2);
3597 swap_2_operands (0, i
.operands
- 1);
3603 if (i
.mem_operands
== 2)
3605 const seg_entry
*temp_seg
;
3606 temp_seg
= i
.seg
[0];
3607 i
.seg
[0] = i
.seg
[1];
3608 i
.seg
[1] = temp_seg
;
3612 /* Try to ensure constant immediates are represented in the smallest
3617 char guess_suffix
= 0;
3621 guess_suffix
= i
.suffix
;
3622 else if (i
.reg_operands
)
3624 /* Figure out a suffix from the last register operand specified.
3625 We can't do this properly yet, ie. excluding InOutPortReg,
3626 but the following works for instructions with immediates.
3627 In any case, we can't set i.suffix yet. */
3628 for (op
= i
.operands
; --op
>= 0;)
3629 if (i
.types
[op
].bitfield
.reg8
)
3631 guess_suffix
= BYTE_MNEM_SUFFIX
;
3634 else if (i
.types
[op
].bitfield
.reg16
)
3636 guess_suffix
= WORD_MNEM_SUFFIX
;
3639 else if (i
.types
[op
].bitfield
.reg32
)
3641 guess_suffix
= LONG_MNEM_SUFFIX
;
3644 else if (i
.types
[op
].bitfield
.reg64
)
3646 guess_suffix
= QWORD_MNEM_SUFFIX
;
3650 else if ((flag_code
== CODE_16BIT
) ^ (i
.prefix
[DATA_PREFIX
] != 0))
3651 guess_suffix
= WORD_MNEM_SUFFIX
;
3653 for (op
= i
.operands
; --op
>= 0;)
3654 if (operand_type_check (i
.types
[op
], imm
))
3656 switch (i
.op
[op
].imms
->X_op
)
3659 /* If a suffix is given, this operand may be shortened. */
3660 switch (guess_suffix
)
3662 case LONG_MNEM_SUFFIX
:
3663 i
.types
[op
].bitfield
.imm32
= 1;
3664 i
.types
[op
].bitfield
.imm64
= 1;
3666 case WORD_MNEM_SUFFIX
:
3667 i
.types
[op
].bitfield
.imm16
= 1;
3668 i
.types
[op
].bitfield
.imm32
= 1;
3669 i
.types
[op
].bitfield
.imm32s
= 1;
3670 i
.types
[op
].bitfield
.imm64
= 1;
3672 case BYTE_MNEM_SUFFIX
:
3673 i
.types
[op
].bitfield
.imm8
= 1;
3674 i
.types
[op
].bitfield
.imm8s
= 1;
3675 i
.types
[op
].bitfield
.imm16
= 1;
3676 i
.types
[op
].bitfield
.imm32
= 1;
3677 i
.types
[op
].bitfield
.imm32s
= 1;
3678 i
.types
[op
].bitfield
.imm64
= 1;
3682 /* If this operand is at most 16 bits, convert it
3683 to a signed 16 bit number before trying to see
3684 whether it will fit in an even smaller size.
3685 This allows a 16-bit operand such as $0xffe0 to
3686 be recognised as within Imm8S range. */
3687 if ((i
.types
[op
].bitfield
.imm16
)
3688 && (i
.op
[op
].imms
->X_add_number
& ~(offsetT
) 0xffff) == 0)
3690 i
.op
[op
].imms
->X_add_number
=
3691 (((i
.op
[op
].imms
->X_add_number
& 0xffff) ^ 0x8000) - 0x8000);
3693 if ((i
.types
[op
].bitfield
.imm32
)
3694 && ((i
.op
[op
].imms
->X_add_number
& ~(((offsetT
) 2 << 31) - 1))
3697 i
.op
[op
].imms
->X_add_number
= ((i
.op
[op
].imms
->X_add_number
3698 ^ ((offsetT
) 1 << 31))
3699 - ((offsetT
) 1 << 31));
3702 = operand_type_or (i
.types
[op
],
3703 smallest_imm_type (i
.op
[op
].imms
->X_add_number
));
3705 /* We must avoid matching of Imm32 templates when 64bit
3706 only immediate is available. */
3707 if (guess_suffix
== QWORD_MNEM_SUFFIX
)
3708 i
.types
[op
].bitfield
.imm32
= 0;
3715 /* Symbols and expressions. */
3717 /* Convert symbolic operand to proper sizes for matching, but don't
3718 prevent matching a set of insns that only supports sizes other
3719 than those matching the insn suffix. */
3721 i386_operand_type mask
, allowed
;
3722 const insn_template
*t
;
3724 operand_type_set (&mask
, 0);
3725 operand_type_set (&allowed
, 0);
3727 for (t
= current_templates
->start
;
3728 t
< current_templates
->end
;
3730 allowed
= operand_type_or (allowed
,
3731 t
->operand_types
[op
]);
3732 switch (guess_suffix
)
3734 case QWORD_MNEM_SUFFIX
:
3735 mask
.bitfield
.imm64
= 1;
3736 mask
.bitfield
.imm32s
= 1;
3738 case LONG_MNEM_SUFFIX
:
3739 mask
.bitfield
.imm32
= 1;
3741 case WORD_MNEM_SUFFIX
:
3742 mask
.bitfield
.imm16
= 1;
3744 case BYTE_MNEM_SUFFIX
:
3745 mask
.bitfield
.imm8
= 1;
3750 allowed
= operand_type_and (mask
, allowed
);
3751 if (!operand_type_all_zero (&allowed
))
3752 i
.types
[op
] = operand_type_and (i
.types
[op
], mask
);
3759 /* Try to use the smallest displacement type too. */
3761 optimize_disp (void)
3765 for (op
= i
.operands
; --op
>= 0;)
3766 if (operand_type_check (i
.types
[op
], disp
))
3768 if (i
.op
[op
].disps
->X_op
== O_constant
)
3770 offsetT op_disp
= i
.op
[op
].disps
->X_add_number
;
3772 if (i
.types
[op
].bitfield
.disp16
3773 && (op_disp
& ~(offsetT
) 0xffff) == 0)
3775 /* If this operand is at most 16 bits, convert
3776 to a signed 16 bit number and don't use 64bit
3778 op_disp
= (((op_disp
& 0xffff) ^ 0x8000) - 0x8000);
3779 i
.types
[op
].bitfield
.disp64
= 0;
3781 if (i
.types
[op
].bitfield
.disp32
3782 && (op_disp
& ~(((offsetT
) 2 << 31) - 1)) == 0)
3784 /* If this operand is at most 32 bits, convert
3785 to a signed 32 bit number and don't use 64bit
3787 op_disp
&= (((offsetT
) 2 << 31) - 1);
3788 op_disp
= (op_disp
^ ((offsetT
) 1 << 31)) - ((addressT
) 1 << 31);
3789 i
.types
[op
].bitfield
.disp64
= 0;
3791 if (!op_disp
&& i
.types
[op
].bitfield
.baseindex
)
3793 i
.types
[op
].bitfield
.disp8
= 0;
3794 i
.types
[op
].bitfield
.disp16
= 0;
3795 i
.types
[op
].bitfield
.disp32
= 0;
3796 i
.types
[op
].bitfield
.disp32s
= 0;
3797 i
.types
[op
].bitfield
.disp64
= 0;
3801 else if (flag_code
== CODE_64BIT
)
3803 if (fits_in_signed_long (op_disp
))
3805 i
.types
[op
].bitfield
.disp64
= 0;
3806 i
.types
[op
].bitfield
.disp32s
= 1;
3808 if (i
.prefix
[ADDR_PREFIX
]
3809 && fits_in_unsigned_long (op_disp
))
3810 i
.types
[op
].bitfield
.disp32
= 1;
3812 if ((i
.types
[op
].bitfield
.disp32
3813 || i
.types
[op
].bitfield
.disp32s
3814 || i
.types
[op
].bitfield
.disp16
)
3815 && fits_in_signed_byte (op_disp
))
3816 i
.types
[op
].bitfield
.disp8
= 1;
3818 else if (i
.reloc
[op
] == BFD_RELOC_386_TLS_DESC_CALL
3819 || i
.reloc
[op
] == BFD_RELOC_X86_64_TLSDESC_CALL
)
3821 fix_new_exp (frag_now
, frag_more (0) - frag_now
->fr_literal
, 0,
3822 i
.op
[op
].disps
, 0, i
.reloc
[op
]);
3823 i
.types
[op
].bitfield
.disp8
= 0;
3824 i
.types
[op
].bitfield
.disp16
= 0;
3825 i
.types
[op
].bitfield
.disp32
= 0;
3826 i
.types
[op
].bitfield
.disp32s
= 0;
3827 i
.types
[op
].bitfield
.disp64
= 0;
3830 /* We only support 64bit displacement on constants. */
3831 i
.types
[op
].bitfield
.disp64
= 0;
3835 /* Check if operands are valid for the instruction. Update VEX
3839 VEX_check_operands (const insn_template
*t
)
3841 if (!t
->opcode_modifier
.vex
)
3844 /* Only check VEX_Imm4, which must be the first operand. */
3845 if (t
->operand_types
[0].bitfield
.vec_imm4
)
3847 if (i
.op
[0].imms
->X_op
!= O_constant
3848 || !fits_in_imm4 (i
.op
[0].imms
->X_add_number
))
3854 /* Turn off Imm8 so that update_imm won't complain. */
3855 i
.types
[0] = vec_imm4
;
3861 static const insn_template
*
3862 match_template (void)
3864 /* Points to template once we've found it. */
3865 const insn_template
*t
;
3866 i386_operand_type overlap0
, overlap1
, overlap2
, overlap3
;
3867 i386_operand_type overlap4
;
3868 unsigned int found_reverse_match
;
3869 i386_opcode_modifier suffix_check
;
3870 i386_operand_type operand_types
[MAX_OPERANDS
];
3871 int addr_prefix_disp
;
3873 unsigned int found_cpu_match
;
3874 unsigned int check_register
;
3876 #if MAX_OPERANDS != 5
3877 # error "MAX_OPERANDS must be 5."
3880 found_reverse_match
= 0;
3881 addr_prefix_disp
= -1;
3883 memset (&suffix_check
, 0, sizeof (suffix_check
));
3884 if (i
.suffix
== BYTE_MNEM_SUFFIX
)
3885 suffix_check
.no_bsuf
= 1;
3886 else if (i
.suffix
== WORD_MNEM_SUFFIX
)
3887 suffix_check
.no_wsuf
= 1;
3888 else if (i
.suffix
== SHORT_MNEM_SUFFIX
)
3889 suffix_check
.no_ssuf
= 1;
3890 else if (i
.suffix
== LONG_MNEM_SUFFIX
)
3891 suffix_check
.no_lsuf
= 1;
3892 else if (i
.suffix
== QWORD_MNEM_SUFFIX
)
3893 suffix_check
.no_qsuf
= 1;
3894 else if (i
.suffix
== LONG_DOUBLE_MNEM_SUFFIX
)
3895 suffix_check
.no_ldsuf
= 1;
3897 /* Must have right number of operands. */
3898 i
.error
= number_of_operands_mismatch
;
3900 for (t
= current_templates
->start
; t
< current_templates
->end
; t
++)
3902 addr_prefix_disp
= -1;
3904 if (i
.operands
!= t
->operands
)
3907 /* Check processor support. */
3908 i
.error
= unsupported
;
3909 found_cpu_match
= (cpu_flags_match (t
)
3910 == CPU_FLAGS_PERFECT_MATCH
);
3911 if (!found_cpu_match
)
3914 /* Check old gcc support. */
3915 i
.error
= old_gcc_only
;
3916 if (!old_gcc
&& t
->opcode_modifier
.oldgcc
)
3919 /* Check AT&T mnemonic. */
3920 i
.error
= unsupported_with_intel_mnemonic
;
3921 if (intel_mnemonic
&& t
->opcode_modifier
.attmnemonic
)
3924 /* Check AT&T/Intel syntax. */
3925 i
.error
= unsupported_syntax
;
3926 if ((intel_syntax
&& t
->opcode_modifier
.attsyntax
)
3927 || (!intel_syntax
&& t
->opcode_modifier
.intelsyntax
))
3930 /* Check the suffix, except for some instructions in intel mode. */
3931 i
.error
= invalid_instruction_suffix
;
3932 if ((!intel_syntax
|| !t
->opcode_modifier
.ignoresize
)
3933 && ((t
->opcode_modifier
.no_bsuf
&& suffix_check
.no_bsuf
)
3934 || (t
->opcode_modifier
.no_wsuf
&& suffix_check
.no_wsuf
)
3935 || (t
->opcode_modifier
.no_lsuf
&& suffix_check
.no_lsuf
)
3936 || (t
->opcode_modifier
.no_ssuf
&& suffix_check
.no_ssuf
)
3937 || (t
->opcode_modifier
.no_qsuf
&& suffix_check
.no_qsuf
)
3938 || (t
->opcode_modifier
.no_ldsuf
&& suffix_check
.no_ldsuf
)))
3941 if (!operand_size_match (t
))
3944 for (j
= 0; j
< MAX_OPERANDS
; j
++)
3945 operand_types
[j
] = t
->operand_types
[j
];
3947 /* In general, don't allow 64-bit operands in 32-bit mode. */
3948 if (i
.suffix
== QWORD_MNEM_SUFFIX
3949 && flag_code
!= CODE_64BIT
3951 ? (!t
->opcode_modifier
.ignoresize
3952 && !intel_float_operand (t
->name
))
3953 : intel_float_operand (t
->name
) != 2)
3954 && ((!operand_types
[0].bitfield
.regmmx
3955 && !operand_types
[0].bitfield
.regxmm
3956 && !operand_types
[0].bitfield
.regymm
)
3957 || (!operand_types
[t
->operands
> 1].bitfield
.regmmx
3958 && !!operand_types
[t
->operands
> 1].bitfield
.regxmm
3959 && !!operand_types
[t
->operands
> 1].bitfield
.regymm
))
3960 && (t
->base_opcode
!= 0x0fc7
3961 || t
->extension_opcode
!= 1 /* cmpxchg8b */))
3964 /* In general, don't allow 32-bit operands on pre-386. */
3965 else if (i
.suffix
== LONG_MNEM_SUFFIX
3966 && !cpu_arch_flags
.bitfield
.cpui386
3968 ? (!t
->opcode_modifier
.ignoresize
3969 && !intel_float_operand (t
->name
))
3970 : intel_float_operand (t
->name
) != 2)
3971 && ((!operand_types
[0].bitfield
.regmmx
3972 && !operand_types
[0].bitfield
.regxmm
)
3973 || (!operand_types
[t
->operands
> 1].bitfield
.regmmx
3974 && !!operand_types
[t
->operands
> 1].bitfield
.regxmm
)))
3977 /* Do not verify operands when there are none. */
3981 /* We've found a match; break out of loop. */
3985 /* Address size prefix will turn Disp64/Disp32/Disp16 operand
3986 into Disp32/Disp16/Disp32 operand. */
3987 if (i
.prefix
[ADDR_PREFIX
] != 0)
3989 /* There should be only one Disp operand. */
3993 for (j
= 0; j
< MAX_OPERANDS
; j
++)
3995 if (operand_types
[j
].bitfield
.disp16
)
3997 addr_prefix_disp
= j
;
3998 operand_types
[j
].bitfield
.disp32
= 1;
3999 operand_types
[j
].bitfield
.disp16
= 0;
4005 for (j
= 0; j
< MAX_OPERANDS
; j
++)
4007 if (operand_types
[j
].bitfield
.disp32
)
4009 addr_prefix_disp
= j
;
4010 operand_types
[j
].bitfield
.disp32
= 0;
4011 operand_types
[j
].bitfield
.disp16
= 1;
4017 for (j
= 0; j
< MAX_OPERANDS
; j
++)
4019 if (operand_types
[j
].bitfield
.disp64
)
4021 addr_prefix_disp
= j
;
4022 operand_types
[j
].bitfield
.disp64
= 0;
4023 operand_types
[j
].bitfield
.disp32
= 1;
4031 /* We check register size if needed. */
4032 check_register
= t
->opcode_modifier
.checkregsize
;
4033 overlap0
= operand_type_and (i
.types
[0], operand_types
[0]);
4034 switch (t
->operands
)
4037 if (!operand_type_match (overlap0
, i
.types
[0]))
4041 /* xchg %eax, %eax is a special case. It is an aliase for nop
4042 only in 32bit mode and we can use opcode 0x90. In 64bit
4043 mode, we can't use 0x90 for xchg %eax, %eax since it should
4044 zero-extend %eax to %rax. */
4045 if (flag_code
== CODE_64BIT
4046 && t
->base_opcode
== 0x90
4047 && operand_type_equal (&i
.types
[0], &acc32
)
4048 && operand_type_equal (&i
.types
[1], &acc32
))
4052 /* If we swap operand in encoding, we either match
4053 the next one or reverse direction of operands. */
4054 if (t
->opcode_modifier
.s
)
4056 else if (t
->opcode_modifier
.d
)
4061 /* If we swap operand in encoding, we match the next one. */
4062 if (i
.swap_operand
&& t
->opcode_modifier
.s
)
4066 overlap1
= operand_type_and (i
.types
[1], operand_types
[1]);
4067 if (!operand_type_match (overlap0
, i
.types
[0])
4068 || !operand_type_match (overlap1
, i
.types
[1])
4070 && !operand_type_register_match (overlap0
, i
.types
[0],
4072 overlap1
, i
.types
[1],
4075 /* Check if other direction is valid ... */
4076 if (!t
->opcode_modifier
.d
&& !t
->opcode_modifier
.floatd
)
4080 /* Try reversing direction of operands. */
4081 overlap0
= operand_type_and (i
.types
[0], operand_types
[1]);
4082 overlap1
= operand_type_and (i
.types
[1], operand_types
[0]);
4083 if (!operand_type_match (overlap0
, i
.types
[0])
4084 || !operand_type_match (overlap1
, i
.types
[1])
4086 && !operand_type_register_match (overlap0
,
4093 /* Does not match either direction. */
4096 /* found_reverse_match holds which of D or FloatDR
4098 if (t
->opcode_modifier
.d
)
4099 found_reverse_match
= Opcode_D
;
4100 else if (t
->opcode_modifier
.floatd
)
4101 found_reverse_match
= Opcode_FloatD
;
4103 found_reverse_match
= 0;
4104 if (t
->opcode_modifier
.floatr
)
4105 found_reverse_match
|= Opcode_FloatR
;
4109 /* Found a forward 2 operand match here. */
4110 switch (t
->operands
)
4113 overlap4
= operand_type_and (i
.types
[4],
4116 overlap3
= operand_type_and (i
.types
[3],
4119 overlap2
= operand_type_and (i
.types
[2],
4124 switch (t
->operands
)
4127 if (!operand_type_match (overlap4
, i
.types
[4])
4128 || !operand_type_register_match (overlap3
,
4136 if (!operand_type_match (overlap3
, i
.types
[3])
4138 && !operand_type_register_match (overlap2
,
4146 /* Here we make use of the fact that there are no
4147 reverse match 3 operand instructions, and all 3
4148 operand instructions only need to be checked for
4149 register consistency between operands 2 and 3. */
4150 if (!operand_type_match (overlap2
, i
.types
[2])
4152 && !operand_type_register_match (overlap1
,
4162 /* Found either forward/reverse 2, 3 or 4 operand match here:
4163 slip through to break. */
4165 if (!found_cpu_match
)
4167 found_reverse_match
= 0;
4171 /* Check if VEX operands are valid. */
4172 if (VEX_check_operands (t
))
4175 /* We've found a match; break out of loop. */
4179 if (t
== current_templates
->end
)
4181 /* We found no match. */
4182 const char *err_msg
;
4187 case operand_size_mismatch
:
4188 err_msg
= _("operand size mismatch");
4190 case operand_type_mismatch
:
4191 err_msg
= _("operand type mismatch");
4193 case register_type_mismatch
:
4194 err_msg
= _("register type mismatch");
4196 case number_of_operands_mismatch
:
4197 err_msg
= _("number of operands mismatch");
4199 case invalid_instruction_suffix
:
4200 err_msg
= _("invalid instruction suffix");
4203 err_msg
= _("Imm4 isn't the first operand");
4206 err_msg
= _("only supported with old gcc");
4208 case unsupported_with_intel_mnemonic
:
4209 err_msg
= _("unsupported with Intel mnemonic");
4211 case unsupported_syntax
:
4212 err_msg
= _("unsupported syntax");
4215 err_msg
= _("unsupported");
4218 as_bad (_("%s for `%s'"), err_msg
,
4219 current_templates
->start
->name
);
4223 if (!quiet_warnings
)
4226 && (i
.types
[0].bitfield
.jumpabsolute
4227 != operand_types
[0].bitfield
.jumpabsolute
))
4229 as_warn (_("indirect %s without `*'"), t
->name
);
4232 if (t
->opcode_modifier
.isprefix
4233 && t
->opcode_modifier
.ignoresize
)
4235 /* Warn them that a data or address size prefix doesn't
4236 affect assembly of the next line of code. */
4237 as_warn (_("stand-alone `%s' prefix"), t
->name
);
4241 /* Copy the template we found. */
4244 if (addr_prefix_disp
!= -1)
4245 i
.tm
.operand_types
[addr_prefix_disp
]
4246 = operand_types
[addr_prefix_disp
];
4248 if (found_reverse_match
)
4250 /* If we found a reverse match we must alter the opcode
4251 direction bit. found_reverse_match holds bits to change
4252 (different for int & float insns). */
4254 i
.tm
.base_opcode
^= found_reverse_match
;
4256 i
.tm
.operand_types
[0] = operand_types
[1];
4257 i
.tm
.operand_types
[1] = operand_types
[0];
4266 int mem_op
= operand_type_check (i
.types
[0], anymem
) ? 0 : 1;
4267 if (i
.tm
.operand_types
[mem_op
].bitfield
.esseg
)
4269 if (i
.seg
[0] != NULL
&& i
.seg
[0] != &es
)
4271 as_bad (_("`%s' operand %d must use `%ses' segment"),
4277 /* There's only ever one segment override allowed per instruction.
4278 This instruction possibly has a legal segment override on the
4279 second operand, so copy the segment to where non-string
4280 instructions store it, allowing common code. */
4281 i
.seg
[0] = i
.seg
[1];
4283 else if (i
.tm
.operand_types
[mem_op
+ 1].bitfield
.esseg
)
4285 if (i
.seg
[1] != NULL
&& i
.seg
[1] != &es
)
4287 as_bad (_("`%s' operand %d must use `%ses' segment"),
4298 process_suffix (void)
4300 /* If matched instruction specifies an explicit instruction mnemonic
4302 if (i
.tm
.opcode_modifier
.size16
)
4303 i
.suffix
= WORD_MNEM_SUFFIX
;
4304 else if (i
.tm
.opcode_modifier
.size32
)
4305 i
.suffix
= LONG_MNEM_SUFFIX
;
4306 else if (i
.tm
.opcode_modifier
.size64
)
4307 i
.suffix
= QWORD_MNEM_SUFFIX
;
4308 else if (i
.reg_operands
)
4310 /* If there's no instruction mnemonic suffix we try to invent one
4311 based on register operands. */
4314 /* We take i.suffix from the last register operand specified,
4315 Destination register type is more significant than source
4316 register type. crc32 in SSE4.2 prefers source register
4318 if (i
.tm
.base_opcode
== 0xf20f38f1)
4320 if (i
.types
[0].bitfield
.reg16
)
4321 i
.suffix
= WORD_MNEM_SUFFIX
;
4322 else if (i
.types
[0].bitfield
.reg32
)
4323 i
.suffix
= LONG_MNEM_SUFFIX
;
4324 else if (i
.types
[0].bitfield
.reg64
)
4325 i
.suffix
= QWORD_MNEM_SUFFIX
;
4327 else if (i
.tm
.base_opcode
== 0xf20f38f0)
4329 if (i
.types
[0].bitfield
.reg8
)
4330 i
.suffix
= BYTE_MNEM_SUFFIX
;
4337 if (i
.tm
.base_opcode
== 0xf20f38f1
4338 || i
.tm
.base_opcode
== 0xf20f38f0)
4340 /* We have to know the operand size for crc32. */
4341 as_bad (_("ambiguous memory operand size for `%s`"),
4346 for (op
= i
.operands
; --op
>= 0;)
4347 if (!i
.tm
.operand_types
[op
].bitfield
.inoutportreg
)
4349 if (i
.types
[op
].bitfield
.reg8
)
4351 i
.suffix
= BYTE_MNEM_SUFFIX
;
4354 else if (i
.types
[op
].bitfield
.reg16
)
4356 i
.suffix
= WORD_MNEM_SUFFIX
;
4359 else if (i
.types
[op
].bitfield
.reg32
)
4361 i
.suffix
= LONG_MNEM_SUFFIX
;
4364 else if (i
.types
[op
].bitfield
.reg64
)
4366 i
.suffix
= QWORD_MNEM_SUFFIX
;
4372 else if (i
.suffix
== BYTE_MNEM_SUFFIX
)
4375 && i
.tm
.opcode_modifier
.ignoresize
4376 && i
.tm
.opcode_modifier
.no_bsuf
)
4378 else if (!check_byte_reg ())
4381 else if (i
.suffix
== LONG_MNEM_SUFFIX
)
4384 && i
.tm
.opcode_modifier
.ignoresize
4385 && i
.tm
.opcode_modifier
.no_lsuf
)
4387 else if (!check_long_reg ())
4390 else if (i
.suffix
== QWORD_MNEM_SUFFIX
)
4393 && i
.tm
.opcode_modifier
.ignoresize
4394 && i
.tm
.opcode_modifier
.no_qsuf
)
4396 else if (!check_qword_reg ())
4399 else if (i
.suffix
== WORD_MNEM_SUFFIX
)
4402 && i
.tm
.opcode_modifier
.ignoresize
4403 && i
.tm
.opcode_modifier
.no_wsuf
)
4405 else if (!check_word_reg ())
4408 else if (i
.suffix
== XMMWORD_MNEM_SUFFIX
4409 || i
.suffix
== YMMWORD_MNEM_SUFFIX
)
4411 /* Skip if the instruction has x/y suffix. match_template
4412 should check if it is a valid suffix. */
4414 else if (intel_syntax
&& i
.tm
.opcode_modifier
.ignoresize
)
4415 /* Do nothing if the instruction is going to ignore the prefix. */
4420 else if (i
.tm
.opcode_modifier
.defaultsize
4422 /* exclude fldenv/frstor/fsave/fstenv */
4423 && i
.tm
.opcode_modifier
.no_ssuf
)
4425 i
.suffix
= stackop_size
;
4427 else if (intel_syntax
4429 && (i
.tm
.operand_types
[0].bitfield
.jumpabsolute
4430 || i
.tm
.opcode_modifier
.jumpbyte
4431 || i
.tm
.opcode_modifier
.jumpintersegment
4432 || (i
.tm
.base_opcode
== 0x0f01 /* [ls][gi]dt */
4433 && i
.tm
.extension_opcode
<= 3)))
4438 if (!i
.tm
.opcode_modifier
.no_qsuf
)
4440 i
.suffix
= QWORD_MNEM_SUFFIX
;
4444 if (!i
.tm
.opcode_modifier
.no_lsuf
)
4445 i
.suffix
= LONG_MNEM_SUFFIX
;
4448 if (!i
.tm
.opcode_modifier
.no_wsuf
)
4449 i
.suffix
= WORD_MNEM_SUFFIX
;
4458 if (i
.tm
.opcode_modifier
.w
)
4460 as_bad (_("no instruction mnemonic suffix given and "
4461 "no register operands; can't size instruction"));
4467 unsigned int suffixes
;
4469 suffixes
= !i
.tm
.opcode_modifier
.no_bsuf
;
4470 if (!i
.tm
.opcode_modifier
.no_wsuf
)
4472 if (!i
.tm
.opcode_modifier
.no_lsuf
)
4474 if (!i
.tm
.opcode_modifier
.no_ldsuf
)
4476 if (!i
.tm
.opcode_modifier
.no_ssuf
)
4478 if (!i
.tm
.opcode_modifier
.no_qsuf
)
4481 /* There are more than suffix matches. */
4482 if (i
.tm
.opcode_modifier
.w
4483 || ((suffixes
& (suffixes
- 1))
4484 && !i
.tm
.opcode_modifier
.defaultsize
4485 && !i
.tm
.opcode_modifier
.ignoresize
))
4487 as_bad (_("ambiguous operand size for `%s'"), i
.tm
.name
);
4493 /* Change the opcode based on the operand size given by i.suffix;
4494 We don't need to change things for byte insns. */
4497 && i
.suffix
!= BYTE_MNEM_SUFFIX
4498 && i
.suffix
!= XMMWORD_MNEM_SUFFIX
4499 && i
.suffix
!= YMMWORD_MNEM_SUFFIX
)
4501 /* It's not a byte, select word/dword operation. */
4502 if (i
.tm
.opcode_modifier
.w
)
4504 if (i
.tm
.opcode_modifier
.shortform
)
4505 i
.tm
.base_opcode
|= 8;
4507 i
.tm
.base_opcode
|= 1;
4510 /* Now select between word & dword operations via the operand
4511 size prefix, except for instructions that will ignore this
4513 if (i
.tm
.opcode_modifier
.addrprefixop0
)
4515 /* The address size override prefix changes the size of the
4517 if ((flag_code
== CODE_32BIT
4518 && i
.op
->regs
[0].reg_type
.bitfield
.reg16
)
4519 || (flag_code
!= CODE_32BIT
4520 && i
.op
->regs
[0].reg_type
.bitfield
.reg32
))
4521 if (!add_prefix (ADDR_PREFIX_OPCODE
))
4524 else if (i
.suffix
!= QWORD_MNEM_SUFFIX
4525 && i
.suffix
!= LONG_DOUBLE_MNEM_SUFFIX
4526 && !i
.tm
.opcode_modifier
.ignoresize
4527 && !i
.tm
.opcode_modifier
.floatmf
4528 && ((i
.suffix
== LONG_MNEM_SUFFIX
) == (flag_code
== CODE_16BIT
)
4529 || (flag_code
== CODE_64BIT
4530 && i
.tm
.opcode_modifier
.jumpbyte
)))
4532 unsigned int prefix
= DATA_PREFIX_OPCODE
;
4534 if (i
.tm
.opcode_modifier
.jumpbyte
) /* jcxz, loop */
4535 prefix
= ADDR_PREFIX_OPCODE
;
4537 if (!add_prefix (prefix
))
4541 /* Set mode64 for an operand. */
4542 if (i
.suffix
== QWORD_MNEM_SUFFIX
4543 && flag_code
== CODE_64BIT
4544 && !i
.tm
.opcode_modifier
.norex64
)
4546 /* Special case for xchg %rax,%rax. It is NOP and doesn't
4547 need rex64. cmpxchg8b is also a special case. */
4548 if (! (i
.operands
== 2
4549 && i
.tm
.base_opcode
== 0x90
4550 && i
.tm
.extension_opcode
== None
4551 && operand_type_equal (&i
.types
[0], &acc64
)
4552 && operand_type_equal (&i
.types
[1], &acc64
))
4553 && ! (i
.operands
== 1
4554 && i
.tm
.base_opcode
== 0xfc7
4555 && i
.tm
.extension_opcode
== 1
4556 && !operand_type_check (i
.types
[0], reg
)
4557 && operand_type_check (i
.types
[0], anymem
)))
4561 /* Size floating point instruction. */
4562 if (i
.suffix
== LONG_MNEM_SUFFIX
)
4563 if (i
.tm
.opcode_modifier
.floatmf
)
4564 i
.tm
.base_opcode
^= 4;
4571 check_byte_reg (void)
4575 for (op
= i
.operands
; --op
>= 0;)
4577 /* If this is an eight bit register, it's OK. If it's the 16 or
4578 32 bit version of an eight bit register, we will just use the
4579 low portion, and that's OK too. */
4580 if (i
.types
[op
].bitfield
.reg8
)
4583 /* crc32 doesn't generate this warning. */
4584 if (i
.tm
.base_opcode
== 0xf20f38f0)
4587 if ((i
.types
[op
].bitfield
.reg16
4588 || i
.types
[op
].bitfield
.reg32
4589 || i
.types
[op
].bitfield
.reg64
)
4590 && i
.op
[op
].regs
->reg_num
< 4)
4592 /* Prohibit these changes in the 64bit mode, since the
4593 lowering is more complicated. */
4594 if (flag_code
== CODE_64BIT
4595 && !i
.tm
.operand_types
[op
].bitfield
.inoutportreg
)
4597 as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
4598 register_prefix
, i
.op
[op
].regs
->reg_name
,
4602 #if REGISTER_WARNINGS
4604 && !i
.tm
.operand_types
[op
].bitfield
.inoutportreg
)
4605 as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
4607 (i
.op
[op
].regs
+ (i
.types
[op
].bitfield
.reg16
4608 ? REGNAM_AL
- REGNAM_AX
4609 : REGNAM_AL
- REGNAM_EAX
))->reg_name
,
4611 i
.op
[op
].regs
->reg_name
,
4616 /* Any other register is bad. */
4617 if (i
.types
[op
].bitfield
.reg16
4618 || i
.types
[op
].bitfield
.reg32
4619 || i
.types
[op
].bitfield
.reg64
4620 || i
.types
[op
].bitfield
.regmmx
4621 || i
.types
[op
].bitfield
.regxmm
4622 || i
.types
[op
].bitfield
.regymm
4623 || i
.types
[op
].bitfield
.sreg2
4624 || i
.types
[op
].bitfield
.sreg3
4625 || i
.types
[op
].bitfield
.control
4626 || i
.types
[op
].bitfield
.debug
4627 || i
.types
[op
].bitfield
.test
4628 || i
.types
[op
].bitfield
.floatreg
4629 || i
.types
[op
].bitfield
.floatacc
)
4631 as_bad (_("`%s%s' not allowed with `%s%c'"),
4633 i
.op
[op
].regs
->reg_name
,
4643 check_long_reg (void)
4647 for (op
= i
.operands
; --op
>= 0;)
4648 /* Reject eight bit registers, except where the template requires
4649 them. (eg. movzb) */
4650 if (i
.types
[op
].bitfield
.reg8
4651 && (i
.tm
.operand_types
[op
].bitfield
.reg16
4652 || i
.tm
.operand_types
[op
].bitfield
.reg32
4653 || i
.tm
.operand_types
[op
].bitfield
.acc
))
4655 as_bad (_("`%s%s' not allowed with `%s%c'"),
4657 i
.op
[op
].regs
->reg_name
,
4662 /* Warn if the e prefix on a general reg is missing. */
4663 else if ((!quiet_warnings
|| flag_code
== CODE_64BIT
)
4664 && i
.types
[op
].bitfield
.reg16
4665 && (i
.tm
.operand_types
[op
].bitfield
.reg32
4666 || i
.tm
.operand_types
[op
].bitfield
.acc
))
4668 /* Prohibit these changes in the 64bit mode, since the
4669 lowering is more complicated. */
4670 if (flag_code
== CODE_64BIT
)
4672 as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
4673 register_prefix
, i
.op
[op
].regs
->reg_name
,
4677 #if REGISTER_WARNINGS
4679 as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
4681 (i
.op
[op
].regs
+ REGNAM_EAX
- REGNAM_AX
)->reg_name
,
4683 i
.op
[op
].regs
->reg_name
,
4687 /* Warn if the r prefix on a general reg is missing. */
4688 else if (i
.types
[op
].bitfield
.reg64
4689 && (i
.tm
.operand_types
[op
].bitfield
.reg32
4690 || i
.tm
.operand_types
[op
].bitfield
.acc
))
4693 && i
.tm
.opcode_modifier
.toqword
4694 && !i
.types
[0].bitfield
.regxmm
)
4696 /* Convert to QWORD. We want REX byte. */
4697 i
.suffix
= QWORD_MNEM_SUFFIX
;
4701 as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
4702 register_prefix
, i
.op
[op
].regs
->reg_name
,
4711 check_qword_reg (void)
4715 for (op
= i
.operands
; --op
>= 0; )
4716 /* Reject eight bit registers, except where the template requires
4717 them. (eg. movzb) */
4718 if (i
.types
[op
].bitfield
.reg8
4719 && (i
.tm
.operand_types
[op
].bitfield
.reg16
4720 || i
.tm
.operand_types
[op
].bitfield
.reg32
4721 || i
.tm
.operand_types
[op
].bitfield
.acc
))
4723 as_bad (_("`%s%s' not allowed with `%s%c'"),
4725 i
.op
[op
].regs
->reg_name
,
4730 /* Warn if the e prefix on a general reg is missing. */
4731 else if ((i
.types
[op
].bitfield
.reg16
4732 || i
.types
[op
].bitfield
.reg32
)
4733 && (i
.tm
.operand_types
[op
].bitfield
.reg32
4734 || i
.tm
.operand_types
[op
].bitfield
.acc
))
4736 /* Prohibit these changes in the 64bit mode, since the
4737 lowering is more complicated. */
4739 && i
.tm
.opcode_modifier
.todword
4740 && !i
.types
[0].bitfield
.regxmm
)
4742 /* Convert to DWORD. We don't want REX byte. */
4743 i
.suffix
= LONG_MNEM_SUFFIX
;
4747 as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
4748 register_prefix
, i
.op
[op
].regs
->reg_name
,
4757 check_word_reg (void)
4760 for (op
= i
.operands
; --op
>= 0;)
4761 /* Reject eight bit registers, except where the template requires
4762 them. (eg. movzb) */
4763 if (i
.types
[op
].bitfield
.reg8
4764 && (i
.tm
.operand_types
[op
].bitfield
.reg16
4765 || i
.tm
.operand_types
[op
].bitfield
.reg32
4766 || i
.tm
.operand_types
[op
].bitfield
.acc
))
4768 as_bad (_("`%s%s' not allowed with `%s%c'"),
4770 i
.op
[op
].regs
->reg_name
,
4775 /* Warn if the e prefix on a general reg is present. */
4776 else if ((!quiet_warnings
|| flag_code
== CODE_64BIT
)
4777 && i
.types
[op
].bitfield
.reg32
4778 && (i
.tm
.operand_types
[op
].bitfield
.reg16
4779 || i
.tm
.operand_types
[op
].bitfield
.acc
))
4781 /* Prohibit these changes in the 64bit mode, since the
4782 lowering is more complicated. */
4783 if (flag_code
== CODE_64BIT
)
4785 as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
4786 register_prefix
, i
.op
[op
].regs
->reg_name
,
4791 #if REGISTER_WARNINGS
4792 as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
4794 (i
.op
[op
].regs
+ REGNAM_AX
- REGNAM_EAX
)->reg_name
,
4796 i
.op
[op
].regs
->reg_name
,
4804 update_imm (unsigned int j
)
4806 i386_operand_type overlap
= i
.types
[j
];
4807 if ((overlap
.bitfield
.imm8
4808 || overlap
.bitfield
.imm8s
4809 || overlap
.bitfield
.imm16
4810 || overlap
.bitfield
.imm32
4811 || overlap
.bitfield
.imm32s
4812 || overlap
.bitfield
.imm64
)
4813 && !operand_type_equal (&overlap
, &imm8
)
4814 && !operand_type_equal (&overlap
, &imm8s
)
4815 && !operand_type_equal (&overlap
, &imm16
)
4816 && !operand_type_equal (&overlap
, &imm32
)
4817 && !operand_type_equal (&overlap
, &imm32s
)
4818 && !operand_type_equal (&overlap
, &imm64
))
4822 i386_operand_type temp
;
4824 operand_type_set (&temp
, 0);
4825 if (i
.suffix
== BYTE_MNEM_SUFFIX
)
4827 temp
.bitfield
.imm8
= overlap
.bitfield
.imm8
;
4828 temp
.bitfield
.imm8s
= overlap
.bitfield
.imm8s
;
4830 else if (i
.suffix
== WORD_MNEM_SUFFIX
)
4831 temp
.bitfield
.imm16
= overlap
.bitfield
.imm16
;
4832 else if (i
.suffix
== QWORD_MNEM_SUFFIX
)
4834 temp
.bitfield
.imm64
= overlap
.bitfield
.imm64
;
4835 temp
.bitfield
.imm32s
= overlap
.bitfield
.imm32s
;
4838 temp
.bitfield
.imm32
= overlap
.bitfield
.imm32
;
4841 else if (operand_type_equal (&overlap
, &imm16_32_32s
)
4842 || operand_type_equal (&overlap
, &imm16_32
)
4843 || operand_type_equal (&overlap
, &imm16_32s
))
4845 if ((flag_code
== CODE_16BIT
) ^ (i
.prefix
[DATA_PREFIX
] != 0))
4850 if (!operand_type_equal (&overlap
, &imm8
)
4851 && !operand_type_equal (&overlap
, &imm8s
)
4852 && !operand_type_equal (&overlap
, &imm16
)
4853 && !operand_type_equal (&overlap
, &imm32
)
4854 && !operand_type_equal (&overlap
, &imm32s
)
4855 && !operand_type_equal (&overlap
, &imm64
))
4857 as_bad (_("no instruction mnemonic suffix given; "
4858 "can't determine immediate size"));
4862 i
.types
[j
] = overlap
;
4872 /* Update the first 2 immediate operands. */
4873 n
= i
.operands
> 2 ? 2 : i
.operands
;
4876 for (j
= 0; j
< n
; j
++)
4877 if (update_imm (j
) == 0)
4880 /* The 3rd operand can't be immediate operand. */
4881 gas_assert (operand_type_check (i
.types
[2], imm
) == 0);
4888 bad_implicit_operand (int xmm
)
4890 const char *ireg
= xmm
? "xmm0" : "ymm0";
4893 as_bad (_("the last operand of `%s' must be `%s%s'"),
4894 i
.tm
.name
, register_prefix
, ireg
);
4896 as_bad (_("the first operand of `%s' must be `%s%s'"),
4897 i
.tm
.name
, register_prefix
, ireg
);
4902 process_operands (void)
4904 /* Default segment register this instruction will use for memory
4905 accesses. 0 means unknown. This is only for optimizing out
4906 unnecessary segment overrides. */
4907 const seg_entry
*default_seg
= 0;
4909 if (i
.tm
.opcode_modifier
.sse2avx
&& i
.tm
.opcode_modifier
.vexvvvv
)
4911 unsigned int dupl
= i
.operands
;
4912 unsigned int dest
= dupl
- 1;
4915 /* The destination must be an xmm register. */
4916 gas_assert (i
.reg_operands
4917 && MAX_OPERANDS
> dupl
4918 && operand_type_equal (&i
.types
[dest
], ®xmm
));
4920 if (i
.tm
.opcode_modifier
.firstxmm0
)
4922 /* The first operand is implicit and must be xmm0. */
4923 gas_assert (operand_type_equal (&i
.types
[0], ®xmm
));
4924 if (i
.op
[0].regs
->reg_num
!= 0)
4925 return bad_implicit_operand (1);
4927 if (i
.tm
.opcode_modifier
.vexsources
== VEX3SOURCES
)
4929 /* Keep xmm0 for instructions with VEX prefix and 3
4935 /* We remove the first xmm0 and keep the number of
4936 operands unchanged, which in fact duplicates the
4938 for (j
= 1; j
< i
.operands
; j
++)
4940 i
.op
[j
- 1] = i
.op
[j
];
4941 i
.types
[j
- 1] = i
.types
[j
];
4942 i
.tm
.operand_types
[j
- 1] = i
.tm
.operand_types
[j
];
4946 else if (i
.tm
.opcode_modifier
.implicit1stxmm0
)
4948 gas_assert ((MAX_OPERANDS
- 1) > dupl
4949 && (i
.tm
.opcode_modifier
.vexsources
4952 /* Add the implicit xmm0 for instructions with VEX prefix
4954 for (j
= i
.operands
; j
> 0; j
--)
4956 i
.op
[j
] = i
.op
[j
- 1];
4957 i
.types
[j
] = i
.types
[j
- 1];
4958 i
.tm
.operand_types
[j
] = i
.tm
.operand_types
[j
- 1];
4961 = (const reg_entry
*) hash_find (reg_hash
, "xmm0");
4962 i
.types
[0] = regxmm
;
4963 i
.tm
.operand_types
[0] = regxmm
;
4966 i
.reg_operands
+= 2;
4971 i
.op
[dupl
] = i
.op
[dest
];
4972 i
.types
[dupl
] = i
.types
[dest
];
4973 i
.tm
.operand_types
[dupl
] = i
.tm
.operand_types
[dest
];
4982 i
.op
[dupl
] = i
.op
[dest
];
4983 i
.types
[dupl
] = i
.types
[dest
];
4984 i
.tm
.operand_types
[dupl
] = i
.tm
.operand_types
[dest
];
4987 if (i
.tm
.opcode_modifier
.immext
)
4990 else if (i
.tm
.opcode_modifier
.firstxmm0
)
4994 /* The first operand is implicit and must be xmm0/ymm0. */
4995 gas_assert (i
.reg_operands
4996 && (operand_type_equal (&i
.types
[0], ®xmm
)
4997 || operand_type_equal (&i
.types
[0], ®ymm
)));
4998 if (i
.op
[0].regs
->reg_num
!= 0)
4999 return bad_implicit_operand (i
.types
[0].bitfield
.regxmm
);
5001 for (j
= 1; j
< i
.operands
; j
++)
5003 i
.op
[j
- 1] = i
.op
[j
];
5004 i
.types
[j
- 1] = i
.types
[j
];
5006 /* We need to adjust fields in i.tm since they are used by
5007 build_modrm_byte. */
5008 i
.tm
.operand_types
[j
- 1] = i
.tm
.operand_types
[j
];
5015 else if (i
.tm
.opcode_modifier
.regkludge
)
5017 /* The imul $imm, %reg instruction is converted into
5018 imul $imm, %reg, %reg, and the clr %reg instruction
5019 is converted into xor %reg, %reg. */
5021 unsigned int first_reg_op
;
5023 if (operand_type_check (i
.types
[0], reg
))
5027 /* Pretend we saw the extra register operand. */
5028 gas_assert (i
.reg_operands
== 1
5029 && i
.op
[first_reg_op
+ 1].regs
== 0);
5030 i
.op
[first_reg_op
+ 1].regs
= i
.op
[first_reg_op
].regs
;
5031 i
.types
[first_reg_op
+ 1] = i
.types
[first_reg_op
];
5036 if (i
.tm
.opcode_modifier
.shortform
)
5038 if (i
.types
[0].bitfield
.sreg2
5039 || i
.types
[0].bitfield
.sreg3
)
5041 if (i
.tm
.base_opcode
== POP_SEG_SHORT
5042 && i
.op
[0].regs
->reg_num
== 1)
5044 as_bad (_("you can't `pop %scs'"), register_prefix
);
5047 i
.tm
.base_opcode
|= (i
.op
[0].regs
->reg_num
<< 3);
5048 if ((i
.op
[0].regs
->reg_flags
& RegRex
) != 0)
5053 /* The register or float register operand is in operand
5057 if (i
.types
[0].bitfield
.floatreg
5058 || operand_type_check (i
.types
[0], reg
))
5062 /* Register goes in low 3 bits of opcode. */
5063 i
.tm
.base_opcode
|= i
.op
[op
].regs
->reg_num
;
5064 if ((i
.op
[op
].regs
->reg_flags
& RegRex
) != 0)
5066 if (!quiet_warnings
&& i
.tm
.opcode_modifier
.ugh
)
5068 /* Warn about some common errors, but press on regardless.
5069 The first case can be generated by gcc (<= 2.8.1). */
5070 if (i
.operands
== 2)
5072 /* Reversed arguments on faddp, fsubp, etc. */
5073 as_warn (_("translating to `%s %s%s,%s%s'"), i
.tm
.name
,
5074 register_prefix
, i
.op
[!intel_syntax
].regs
->reg_name
,
5075 register_prefix
, i
.op
[intel_syntax
].regs
->reg_name
);
5079 /* Extraneous `l' suffix on fp insn. */
5080 as_warn (_("translating to `%s %s%s'"), i
.tm
.name
,
5081 register_prefix
, i
.op
[0].regs
->reg_name
);
5086 else if (i
.tm
.opcode_modifier
.modrm
)
5088 /* The opcode is completed (modulo i.tm.extension_opcode which
5089 must be put into the modrm byte). Now, we make the modrm and
5090 index base bytes based on all the info we've collected. */
5092 default_seg
= build_modrm_byte ();
5094 else if ((i
.tm
.base_opcode
& ~0x3) == MOV_AX_DISP32
)
5098 else if (i
.tm
.opcode_modifier
.isstring
)
5100 /* For the string instructions that allow a segment override
5101 on one of their operands, the default segment is ds. */
5105 if (i
.tm
.base_opcode
== 0x8d /* lea */
5108 as_warn (_("segment override on `%s' is ineffectual"), i
.tm
.name
);
5110 /* If a segment was explicitly specified, and the specified segment
5111 is not the default, use an opcode prefix to select it. If we
5112 never figured out what the default segment is, then default_seg
5113 will be zero at this point, and the specified segment prefix will
5115 if ((i
.seg
[0]) && (i
.seg
[0] != default_seg
))
5117 if (!add_prefix (i
.seg
[0]->seg_prefix
))
5123 static const seg_entry
*
5124 build_modrm_byte (void)
5126 const seg_entry
*default_seg
= 0;
5127 unsigned int source
, dest
;
5130 /* The first operand of instructions with VEX prefix and 3 sources
5131 must be VEX_Imm4. */
5132 vex_3_sources
= i
.tm
.opcode_modifier
.vexsources
== VEX3SOURCES
;
5135 unsigned int nds
, reg_slot
;
5138 if (i
.tm
.opcode_modifier
.veximmext
5139 && i
.tm
.opcode_modifier
.immext
)
5141 dest
= i
.operands
- 2;
5142 gas_assert (dest
== 3);
5145 dest
= i
.operands
- 1;
5148 /* There are 2 kinds of instructions:
5149 1. 5 operands: 4 register operands or 3 register operands
5150 plus 1 memory operand plus one Vec_Imm4 operand, VexXDS, and
5151 VexW0 or VexW1. The destination must be either XMM or YMM
5153 2. 4 operands: 4 register operands or 3 register operands
5154 plus 1 memory operand, VexXDS, and VexImmExt */
5155 gas_assert ((i
.reg_operands
== 4
5156 || (i
.reg_operands
== 3 && i
.mem_operands
== 1))
5157 && i
.tm
.opcode_modifier
.vexvvvv
== VEXXDS
5158 && (i
.tm
.opcode_modifier
.veximmext
5159 || (i
.imm_operands
== 1
5160 && i
.types
[0].bitfield
.vec_imm4
5161 && (i
.tm
.opcode_modifier
.vexw
== VEXW0
5162 || i
.tm
.opcode_modifier
.vexw
== VEXW1
)
5163 && (operand_type_equal (&i
.tm
.operand_types
[dest
], ®xmm
)
5164 || operand_type_equal (&i
.tm
.operand_types
[dest
], ®ymm
)))));
5166 if (i
.imm_operands
== 0)
5168 /* When there is no immediate operand, generate an 8bit
5169 immediate operand to encode the first operand. */
5170 exp
= &im_expressions
[i
.imm_operands
++];
5171 i
.op
[i
.operands
].imms
= exp
;
5172 i
.types
[i
.operands
] = imm8
;
5174 /* If VexW1 is set, the first operand is the source and
5175 the second operand is encoded in the immediate operand. */
5176 if (i
.tm
.opcode_modifier
.vexw
== VEXW1
)
5187 /* FMA swaps REG and NDS. */
5188 if (i
.tm
.cpu_flags
.bitfield
.cpufma
)
5196 gas_assert (operand_type_equal (&i
.tm
.operand_types
[reg_slot
],
5198 || operand_type_equal (&i
.tm
.operand_types
[reg_slot
],
5200 exp
->X_op
= O_constant
;
5202 = ((i
.op
[reg_slot
].regs
->reg_num
5203 + ((i
.op
[reg_slot
].regs
->reg_flags
& RegRex
) ? 8 : 0))
5208 unsigned int imm_slot
;
5210 if (i
.tm
.opcode_modifier
.vexw
== VEXW0
)
5212 /* If VexW0 is set, the third operand is the source and
5213 the second operand is encoded in the immediate
5220 /* VexW1 is set, the second operand is the source and
5221 the third operand is encoded in the immediate
5227 if (i
.tm
.opcode_modifier
.immext
)
5229 /* When ImmExt is set, the immdiate byte is the last
5231 imm_slot
= i
.operands
- 1;
5239 /* Turn on Imm8 so that output_imm will generate it. */
5240 i
.types
[imm_slot
].bitfield
.imm8
= 1;
5243 gas_assert (operand_type_equal (&i
.tm
.operand_types
[reg_slot
],
5245 || operand_type_equal (&i
.tm
.operand_types
[reg_slot
],
5247 i
.op
[imm_slot
].imms
->X_add_number
5248 |= ((i
.op
[reg_slot
].regs
->reg_num
5249 + ((i
.op
[reg_slot
].regs
->reg_flags
& RegRex
) ? 8 : 0))
5253 gas_assert (operand_type_equal (&i
.tm
.operand_types
[nds
], ®xmm
)
5254 || operand_type_equal (&i
.tm
.operand_types
[nds
],
5256 i
.vex
.register_specifier
= i
.op
[nds
].regs
;
5261 /* i.reg_operands MUST be the number of real register operands;
5262 implicit registers do not count. If there are 3 register
5263 operands, it must be a instruction with VexNDS. For a
5264 instruction with VexNDD, the destination register is encoded
5265 in VEX prefix. If there are 4 register operands, it must be
5266 a instruction with VEX prefix and 3 sources. */
5267 if (i
.mem_operands
== 0
5268 && ((i
.reg_operands
== 2
5269 && i
.tm
.opcode_modifier
.vexvvvv
<= VEXXDS
)
5270 || (i
.reg_operands
== 3
5271 && i
.tm
.opcode_modifier
.vexvvvv
== VEXXDS
)
5272 || (i
.reg_operands
== 4 && vex_3_sources
)))
5280 /* When there are 3 operands, one of them may be immediate,
5281 which may be the first or the last operand. Otherwise,
5282 the first operand must be shift count register (cl) or it
5283 is an instruction with VexNDS. */
5284 gas_assert (i
.imm_operands
== 1
5285 || (i
.imm_operands
== 0
5286 && (i
.tm
.opcode_modifier
.vexvvvv
== VEXXDS
5287 || i
.types
[0].bitfield
.shiftcount
)));
5288 if (operand_type_check (i
.types
[0], imm
)
5289 || i
.types
[0].bitfield
.shiftcount
)
5295 /* When there are 4 operands, the first two must be 8bit
5296 immediate operands. The source operand will be the 3rd
5299 For instructions with VexNDS, if the first operand
5300 an imm8, the source operand is the 2nd one. If the last
5301 operand is imm8, the source operand is the first one. */
5302 gas_assert ((i
.imm_operands
== 2
5303 && i
.types
[0].bitfield
.imm8
5304 && i
.types
[1].bitfield
.imm8
)
5305 || (i
.tm
.opcode_modifier
.vexvvvv
== VEXXDS
5306 && i
.imm_operands
== 1
5307 && (i
.types
[0].bitfield
.imm8
5308 || i
.types
[i
.operands
- 1].bitfield
.imm8
)));
5309 if (i
.imm_operands
== 2)
5313 if (i
.types
[0].bitfield
.imm8
)
5329 if (i
.tm
.opcode_modifier
.vexvvvv
== VEXXDS
)
5331 /* For instructions with VexNDS, the register-only
5332 source operand must be 32/64bit integer, XMM or
5333 YMM register. It is encoded in VEX prefix. We
5334 need to clear RegMem bit before calling
5335 operand_type_equal. */
5337 i386_operand_type op
;
5340 /* Check register-only source operand when two source
5341 operands are swapped. */
5342 if (!i
.tm
.operand_types
[source
].bitfield
.baseindex
5343 && i
.tm
.operand_types
[dest
].bitfield
.baseindex
)
5351 op
= i
.tm
.operand_types
[vvvv
];
5352 op
.bitfield
.regmem
= 0;
5353 if ((dest
+ 1) >= i
.operands
5354 || (op
.bitfield
.reg32
!= 1
5355 && !op
.bitfield
.reg64
!= 1
5356 && !operand_type_equal (&op
, ®xmm
)
5357 && !operand_type_equal (&op
, ®ymm
)))
5359 i
.vex
.register_specifier
= i
.op
[vvvv
].regs
;
5365 /* One of the register operands will be encoded in the i.tm.reg
5366 field, the other in the combined i.tm.mode and i.tm.regmem
5367 fields. If no form of this instruction supports a memory
5368 destination operand, then we assume the source operand may
5369 sometimes be a memory operand and so we need to store the
5370 destination in the i.rm.reg field. */
5371 if (!i
.tm
.operand_types
[dest
].bitfield
.regmem
5372 && operand_type_check (i
.tm
.operand_types
[dest
], anymem
) == 0)
5374 i
.rm
.reg
= i
.op
[dest
].regs
->reg_num
;
5375 i
.rm
.regmem
= i
.op
[source
].regs
->reg_num
;
5376 if ((i
.op
[dest
].regs
->reg_flags
& RegRex
) != 0)
5378 if ((i
.op
[source
].regs
->reg_flags
& RegRex
) != 0)
5383 i
.rm
.reg
= i
.op
[source
].regs
->reg_num
;
5384 i
.rm
.regmem
= i
.op
[dest
].regs
->reg_num
;
5385 if ((i
.op
[dest
].regs
->reg_flags
& RegRex
) != 0)
5387 if ((i
.op
[source
].regs
->reg_flags
& RegRex
) != 0)
5390 if (flag_code
!= CODE_64BIT
&& (i
.rex
& (REX_R
| REX_B
)))
5392 if (!i
.types
[0].bitfield
.control
5393 && !i
.types
[1].bitfield
.control
)
5395 i
.rex
&= ~(REX_R
| REX_B
);
5396 add_prefix (LOCK_PREFIX_OPCODE
);
5400 { /* If it's not 2 reg operands... */
5405 unsigned int fake_zero_displacement
= 0;
5408 for (op
= 0; op
< i
.operands
; op
++)
5409 if (operand_type_check (i
.types
[op
], anymem
))
5411 gas_assert (op
< i
.operands
);
5415 if (i
.base_reg
== 0)
5418 if (!i
.disp_operands
)
5419 fake_zero_displacement
= 1;
5420 if (i
.index_reg
== 0)
5422 /* Operand is just <disp> */
5423 if (flag_code
== CODE_64BIT
)
5425 /* 64bit mode overwrites the 32bit absolute
5426 addressing by RIP relative addressing and
5427 absolute addressing is encoded by one of the
5428 redundant SIB forms. */
5429 i
.rm
.regmem
= ESCAPE_TO_TWO_BYTE_ADDRESSING
;
5430 i
.sib
.base
= NO_BASE_REGISTER
;
5431 i
.sib
.index
= NO_INDEX_REGISTER
;
5432 i
.types
[op
] = ((i
.prefix
[ADDR_PREFIX
] == 0)
5433 ? disp32s
: disp32
);
5435 else if ((flag_code
== CODE_16BIT
)
5436 ^ (i
.prefix
[ADDR_PREFIX
] != 0))
5438 i
.rm
.regmem
= NO_BASE_REGISTER_16
;
5439 i
.types
[op
] = disp16
;
5443 i
.rm
.regmem
= NO_BASE_REGISTER
;
5444 i
.types
[op
] = disp32
;
5447 else /* !i.base_reg && i.index_reg */
5449 if (i
.index_reg
->reg_num
== RegEiz
5450 || i
.index_reg
->reg_num
== RegRiz
)
5451 i
.sib
.index
= NO_INDEX_REGISTER
;
5453 i
.sib
.index
= i
.index_reg
->reg_num
;
5454 i
.sib
.base
= NO_BASE_REGISTER
;
5455 i
.sib
.scale
= i
.log2_scale_factor
;
5456 i
.rm
.regmem
= ESCAPE_TO_TWO_BYTE_ADDRESSING
;
5457 i
.types
[op
].bitfield
.disp8
= 0;
5458 i
.types
[op
].bitfield
.disp16
= 0;
5459 i
.types
[op
].bitfield
.disp64
= 0;
5460 if (flag_code
!= CODE_64BIT
)
5462 /* Must be 32 bit */
5463 i
.types
[op
].bitfield
.disp32
= 1;
5464 i
.types
[op
].bitfield
.disp32s
= 0;
5468 i
.types
[op
].bitfield
.disp32
= 0;
5469 i
.types
[op
].bitfield
.disp32s
= 1;
5471 if ((i
.index_reg
->reg_flags
& RegRex
) != 0)
5475 /* RIP addressing for 64bit mode. */
5476 else if (i
.base_reg
->reg_num
== RegRip
||
5477 i
.base_reg
->reg_num
== RegEip
)
5479 i
.rm
.regmem
= NO_BASE_REGISTER
;
5480 i
.types
[op
].bitfield
.disp8
= 0;
5481 i
.types
[op
].bitfield
.disp16
= 0;
5482 i
.types
[op
].bitfield
.disp32
= 0;
5483 i
.types
[op
].bitfield
.disp32s
= 1;
5484 i
.types
[op
].bitfield
.disp64
= 0;
5485 i
.flags
[op
] |= Operand_PCrel
;
5486 if (! i
.disp_operands
)
5487 fake_zero_displacement
= 1;
5489 else if (i
.base_reg
->reg_type
.bitfield
.reg16
)
5491 switch (i
.base_reg
->reg_num
)
5494 if (i
.index_reg
== 0)
5496 else /* (%bx,%si) -> 0, or (%bx,%di) -> 1 */
5497 i
.rm
.regmem
= i
.index_reg
->reg_num
- 6;
5501 if (i
.index_reg
== 0)
5504 if (operand_type_check (i
.types
[op
], disp
) == 0)
5506 /* fake (%bp) into 0(%bp) */
5507 i
.types
[op
].bitfield
.disp8
= 1;
5508 fake_zero_displacement
= 1;
5511 else /* (%bp,%si) -> 2, or (%bp,%di) -> 3 */
5512 i
.rm
.regmem
= i
.index_reg
->reg_num
- 6 + 2;
5514 default: /* (%si) -> 4 or (%di) -> 5 */
5515 i
.rm
.regmem
= i
.base_reg
->reg_num
- 6 + 4;
5517 i
.rm
.mode
= mode_from_disp_size (i
.types
[op
]);
5519 else /* i.base_reg and 32/64 bit mode */
5521 if (flag_code
== CODE_64BIT
5522 && operand_type_check (i
.types
[op
], disp
))
5524 i386_operand_type temp
;
5525 operand_type_set (&temp
, 0);
5526 temp
.bitfield
.disp8
= i
.types
[op
].bitfield
.disp8
;
5528 if (i
.prefix
[ADDR_PREFIX
] == 0)
5529 i
.types
[op
].bitfield
.disp32s
= 1;
5531 i
.types
[op
].bitfield
.disp32
= 1;
5534 i
.rm
.regmem
= i
.base_reg
->reg_num
;
5535 if ((i
.base_reg
->reg_flags
& RegRex
) != 0)
5537 i
.sib
.base
= i
.base_reg
->reg_num
;
5538 /* x86-64 ignores REX prefix bit here to avoid decoder
5540 if ((i
.base_reg
->reg_num
& 7) == EBP_REG_NUM
)
5543 if (i
.disp_operands
== 0)
5545 fake_zero_displacement
= 1;
5546 i
.types
[op
].bitfield
.disp8
= 1;
5549 else if (i
.base_reg
->reg_num
== ESP_REG_NUM
)
5553 i
.sib
.scale
= i
.log2_scale_factor
;
5554 if (i
.index_reg
== 0)
5556 /* <disp>(%esp) becomes two byte modrm with no index
5557 register. We've already stored the code for esp
5558 in i.rm.regmem ie. ESCAPE_TO_TWO_BYTE_ADDRESSING.
5559 Any base register besides %esp will not use the
5560 extra modrm byte. */
5561 i
.sib
.index
= NO_INDEX_REGISTER
;
5565 if (i
.index_reg
->reg_num
== RegEiz
5566 || i
.index_reg
->reg_num
== RegRiz
)
5567 i
.sib
.index
= NO_INDEX_REGISTER
;
5569 i
.sib
.index
= i
.index_reg
->reg_num
;
5570 i
.rm
.regmem
= ESCAPE_TO_TWO_BYTE_ADDRESSING
;
5571 if ((i
.index_reg
->reg_flags
& RegRex
) != 0)
5576 && (i
.reloc
[op
] == BFD_RELOC_386_TLS_DESC_CALL
5577 || i
.reloc
[op
] == BFD_RELOC_X86_64_TLSDESC_CALL
))
5580 i
.rm
.mode
= mode_from_disp_size (i
.types
[op
]);
5583 if (fake_zero_displacement
)
5585 /* Fakes a zero displacement assuming that i.types[op]
5586 holds the correct displacement size. */
5589 gas_assert (i
.op
[op
].disps
== 0);
5590 exp
= &disp_expressions
[i
.disp_operands
++];
5591 i
.op
[op
].disps
= exp
;
5592 exp
->X_op
= O_constant
;
5593 exp
->X_add_number
= 0;
5594 exp
->X_add_symbol
= (symbolS
*) 0;
5595 exp
->X_op_symbol
= (symbolS
*) 0;
5603 if (i
.tm
.opcode_modifier
.vexsources
== XOP2SOURCES
)
5605 if (operand_type_check (i
.types
[0], imm
))
5606 i
.vex
.register_specifier
= NULL
;
5609 /* VEX.vvvv encodes one of the sources when the first
5610 operand is not an immediate. */
5611 if (i
.tm
.opcode_modifier
.vexw
== VEXW0
)
5612 i
.vex
.register_specifier
= i
.op
[0].regs
;
5614 i
.vex
.register_specifier
= i
.op
[1].regs
;
5617 /* Destination is a XMM register encoded in the ModRM.reg
5619 i
.rm
.reg
= i
.op
[2].regs
->reg_num
;
5620 if ((i
.op
[2].regs
->reg_flags
& RegRex
) != 0)
5623 /* ModRM.rm and VEX.B encodes the other source. */
5624 if (!i
.mem_operands
)
5628 if (i
.tm
.opcode_modifier
.vexw
== VEXW0
)
5629 i
.rm
.regmem
= i
.op
[1].regs
->reg_num
;
5631 i
.rm
.regmem
= i
.op
[0].regs
->reg_num
;
5633 if ((i
.op
[1].regs
->reg_flags
& RegRex
) != 0)
5637 else if (i
.tm
.opcode_modifier
.vexvvvv
== VEXLWP
)
5639 i
.vex
.register_specifier
= i
.op
[2].regs
;
5640 if (!i
.mem_operands
)
5643 i
.rm
.regmem
= i
.op
[1].regs
->reg_num
;
5644 if ((i
.op
[1].regs
->reg_flags
& RegRex
) != 0)
5648 /* Fill in i.rm.reg or i.rm.regmem field with register operand
5649 (if any) based on i.tm.extension_opcode. Again, we must be
5650 careful to make sure that segment/control/debug/test/MMX
5651 registers are coded into the i.rm.reg field. */
5652 else if (i
.reg_operands
)
5655 unsigned int vex_reg
= ~0;
5657 for (op
= 0; op
< i
.operands
; op
++)
5658 if (i
.types
[op
].bitfield
.reg8
5659 || i
.types
[op
].bitfield
.reg16
5660 || i
.types
[op
].bitfield
.reg32
5661 || i
.types
[op
].bitfield
.reg64
5662 || i
.types
[op
].bitfield
.regmmx
5663 || i
.types
[op
].bitfield
.regxmm
5664 || i
.types
[op
].bitfield
.regymm
5665 || i
.types
[op
].bitfield
.sreg2
5666 || i
.types
[op
].bitfield
.sreg3
5667 || i
.types
[op
].bitfield
.control
5668 || i
.types
[op
].bitfield
.debug
5669 || i
.types
[op
].bitfield
.test
)
5674 else if (i
.tm
.opcode_modifier
.vexvvvv
== VEXXDS
)
5676 /* For instructions with VexNDS, the register-only
5677 source operand is encoded in VEX prefix. */
5678 gas_assert (mem
!= (unsigned int) ~0);
5683 gas_assert (op
< i
.operands
);
5687 /* Check register-only source operand when two source
5688 operands are swapped. */
5689 if (!i
.tm
.operand_types
[op
].bitfield
.baseindex
5690 && i
.tm
.operand_types
[op
+ 1].bitfield
.baseindex
)
5694 gas_assert (mem
== (vex_reg
+ 1)
5695 && op
< i
.operands
);
5700 gas_assert (vex_reg
< i
.operands
);
5704 else if (i
.tm
.opcode_modifier
.vexvvvv
== VEXNDD
)
5706 /* For instructions with VexNDD, the register destination
5707 is encoded in VEX prefix. */
5708 if (i
.mem_operands
== 0)
5710 /* There is no memory operand. */
5711 gas_assert ((op
+ 2) == i
.operands
);
5716 /* There are only 2 operands. */
5717 gas_assert (op
< 2 && i
.operands
== 2);
5722 gas_assert (op
< i
.operands
);
5724 if (vex_reg
!= (unsigned int) ~0)
5726 i386_operand_type
*type
= &i
.tm
.operand_types
[vex_reg
];
5728 if (type
->bitfield
.reg32
!= 1
5729 && type
->bitfield
.reg64
!= 1
5730 && !operand_type_equal (type
, ®xmm
)
5731 && !operand_type_equal (type
, ®ymm
))
5734 i
.vex
.register_specifier
= i
.op
[vex_reg
].regs
;
5737 /* Don't set OP operand twice. */
5740 /* If there is an extension opcode to put here, the
5741 register number must be put into the regmem field. */
5742 if (i
.tm
.extension_opcode
!= None
)
5744 i
.rm
.regmem
= i
.op
[op
].regs
->reg_num
;
5745 if ((i
.op
[op
].regs
->reg_flags
& RegRex
) != 0)
5750 i
.rm
.reg
= i
.op
[op
].regs
->reg_num
;
5751 if ((i
.op
[op
].regs
->reg_flags
& RegRex
) != 0)
5756 /* Now, if no memory operand has set i.rm.mode = 0, 1, 2 we
5757 must set it to 3 to indicate this is a register operand
5758 in the regmem field. */
5759 if (!i
.mem_operands
)
5763 /* Fill in i.rm.reg field with extension opcode (if any). */
5764 if (i
.tm
.extension_opcode
!= None
)
5765 i
.rm
.reg
= i
.tm
.extension_opcode
;
5771 output_branch (void)
5777 relax_substateT subtype
;
5781 code16
= flag_code
== CODE_16BIT
? CODE16
: 0;
5782 size
= i
.disp32_encoding
? BIG
: SMALL
;
5785 if (i
.prefix
[DATA_PREFIX
] != 0)
5791 /* Pentium4 branch hints. */
5792 if (i
.prefix
[SEG_PREFIX
] == CS_PREFIX_OPCODE
/* not taken */
5793 || i
.prefix
[SEG_PREFIX
] == DS_PREFIX_OPCODE
/* taken */)
5798 if (i
.prefix
[REX_PREFIX
] != 0)
5804 if (i
.prefixes
!= 0 && !intel_syntax
)
5805 as_warn (_("skipping prefixes on this instruction"));
5807 /* It's always a symbol; End frag & setup for relax.
5808 Make sure there is enough room in this frag for the largest
5809 instruction we may generate in md_convert_frag. This is 2
5810 bytes for the opcode and room for the prefix and largest
5812 frag_grow (prefix
+ 2 + 4);
5813 /* Prefix and 1 opcode byte go in fr_fix. */
5814 p
= frag_more (prefix
+ 1);
5815 if (i
.prefix
[DATA_PREFIX
] != 0)
5816 *p
++ = DATA_PREFIX_OPCODE
;
5817 if (i
.prefix
[SEG_PREFIX
] == CS_PREFIX_OPCODE
5818 || i
.prefix
[SEG_PREFIX
] == DS_PREFIX_OPCODE
)
5819 *p
++ = i
.prefix
[SEG_PREFIX
];
5820 if (i
.prefix
[REX_PREFIX
] != 0)
5821 *p
++ = i
.prefix
[REX_PREFIX
];
5822 *p
= i
.tm
.base_opcode
;
5824 if ((unsigned char) *p
== JUMP_PC_RELATIVE
)
5825 subtype
= ENCODE_RELAX_STATE (UNCOND_JUMP
, size
);
5826 else if (cpu_arch_flags
.bitfield
.cpui386
)
5827 subtype
= ENCODE_RELAX_STATE (COND_JUMP
, size
);
5829 subtype
= ENCODE_RELAX_STATE (COND_JUMP86
, size
);
5832 sym
= i
.op
[0].disps
->X_add_symbol
;
5833 off
= i
.op
[0].disps
->X_add_number
;
5835 if (i
.op
[0].disps
->X_op
!= O_constant
5836 && i
.op
[0].disps
->X_op
!= O_symbol
)
5838 /* Handle complex expressions. */
5839 sym
= make_expr_symbol (i
.op
[0].disps
);
5843 /* 1 possible extra opcode + 4 byte displacement go in var part.
5844 Pass reloc in fr_var. */
5845 frag_var (rs_machine_dependent
, 5, i
.reloc
[0], subtype
, sym
, off
, p
);
5855 if (i
.tm
.opcode_modifier
.jumpbyte
)
5857 /* This is a loop or jecxz type instruction. */
5859 if (i
.prefix
[ADDR_PREFIX
] != 0)
5861 FRAG_APPEND_1_CHAR (ADDR_PREFIX_OPCODE
);
5864 /* Pentium4 branch hints. */
5865 if (i
.prefix
[SEG_PREFIX
] == CS_PREFIX_OPCODE
/* not taken */
5866 || i
.prefix
[SEG_PREFIX
] == DS_PREFIX_OPCODE
/* taken */)
5868 FRAG_APPEND_1_CHAR (i
.prefix
[SEG_PREFIX
]);
5877 if (flag_code
== CODE_16BIT
)
5880 if (i
.prefix
[DATA_PREFIX
] != 0)
5882 FRAG_APPEND_1_CHAR (DATA_PREFIX_OPCODE
);
5892 if (i
.prefix
[REX_PREFIX
] != 0)
5894 FRAG_APPEND_1_CHAR (i
.prefix
[REX_PREFIX
]);
5898 if (i
.prefixes
!= 0 && !intel_syntax
)
5899 as_warn (_("skipping prefixes on this instruction"));
5901 p
= frag_more (1 + size
);
5902 *p
++ = i
.tm
.base_opcode
;
5904 fixP
= fix_new_exp (frag_now
, p
- frag_now
->fr_literal
, size
,
5905 i
.op
[0].disps
, 1, reloc (size
, 1, 1, i
.reloc
[0]));
5907 /* All jumps handled here are signed, but don't use a signed limit
5908 check for 32 and 16 bit jumps as we want to allow wrap around at
5909 4G and 64k respectively. */
5911 fixP
->fx_signed
= 1;
5915 output_interseg_jump (void)
5923 if (flag_code
== CODE_16BIT
)
5927 if (i
.prefix
[DATA_PREFIX
] != 0)
5933 if (i
.prefix
[REX_PREFIX
] != 0)
5943 if (i
.prefixes
!= 0 && !intel_syntax
)
5944 as_warn (_("skipping prefixes on this instruction"));
5946 /* 1 opcode; 2 segment; offset */
5947 p
= frag_more (prefix
+ 1 + 2 + size
);
5949 if (i
.prefix
[DATA_PREFIX
] != 0)
5950 *p
++ = DATA_PREFIX_OPCODE
;
5952 if (i
.prefix
[REX_PREFIX
] != 0)
5953 *p
++ = i
.prefix
[REX_PREFIX
];
5955 *p
++ = i
.tm
.base_opcode
;
5956 if (i
.op
[1].imms
->X_op
== O_constant
)
5958 offsetT n
= i
.op
[1].imms
->X_add_number
;
5961 && !fits_in_unsigned_word (n
)
5962 && !fits_in_signed_word (n
))
5964 as_bad (_("16-bit jump out of range"));
5967 md_number_to_chars (p
, n
, size
);
5970 fix_new_exp (frag_now
, p
- frag_now
->fr_literal
, size
,
5971 i
.op
[1].imms
, 0, reloc (size
, 0, 0, i
.reloc
[1]));
5972 if (i
.op
[0].imms
->X_op
!= O_constant
)
5973 as_bad (_("can't handle non absolute segment in `%s'"),
5975 md_number_to_chars (p
+ size
, (valueT
) i
.op
[0].imms
->X_add_number
, 2);
5981 fragS
*insn_start_frag
;
5982 offsetT insn_start_off
;
5984 /* Tie dwarf2 debug info to the address at the start of the insn.
5985 We can't do this after the insn has been output as the current
5986 frag may have been closed off. eg. by frag_var. */
5987 dwarf2_emit_insn (0);
5989 insn_start_frag
= frag_now
;
5990 insn_start_off
= frag_now_fix ();
5993 if (i
.tm
.opcode_modifier
.jump
)
5995 else if (i
.tm
.opcode_modifier
.jumpbyte
5996 || i
.tm
.opcode_modifier
.jumpdword
)
5998 else if (i
.tm
.opcode_modifier
.jumpintersegment
)
5999 output_interseg_jump ();
6002 /* Output normal instructions here. */
6006 unsigned int prefix
;
6008 /* Since the VEX prefix contains the implicit prefix, we don't
6009 need the explicit prefix. */
6010 if (!i
.tm
.opcode_modifier
.vex
)
6012 switch (i
.tm
.opcode_length
)
6015 if (i
.tm
.base_opcode
& 0xff000000)
6017 prefix
= (i
.tm
.base_opcode
>> 24) & 0xff;
6022 if ((i
.tm
.base_opcode
& 0xff0000) != 0)
6024 prefix
= (i
.tm
.base_opcode
>> 16) & 0xff;
6025 if (i
.tm
.cpu_flags
.bitfield
.cpupadlock
)
6028 if (prefix
!= REPE_PREFIX_OPCODE
6029 || (i
.prefix
[REP_PREFIX
]
6030 != REPE_PREFIX_OPCODE
))
6031 add_prefix (prefix
);
6034 add_prefix (prefix
);
6043 /* The prefix bytes. */
6044 for (j
= ARRAY_SIZE (i
.prefix
), q
= i
.prefix
; j
> 0; j
--, q
++)
6046 FRAG_APPEND_1_CHAR (*q
);
6049 if (i
.tm
.opcode_modifier
.vex
)
6051 for (j
= 0, q
= i
.prefix
; j
< ARRAY_SIZE (i
.prefix
); j
++, q
++)
6056 /* REX byte is encoded in VEX prefix. */
6060 FRAG_APPEND_1_CHAR (*q
);
6063 /* There should be no other prefixes for instructions
6068 /* Now the VEX prefix. */
6069 p
= frag_more (i
.vex
.length
);
6070 for (j
= 0; j
< i
.vex
.length
; j
++)
6071 p
[j
] = i
.vex
.bytes
[j
];
6074 /* Now the opcode; be careful about word order here! */
6075 if (i
.tm
.opcode_length
== 1)
6077 FRAG_APPEND_1_CHAR (i
.tm
.base_opcode
);
6081 switch (i
.tm
.opcode_length
)
6085 *p
++ = (i
.tm
.base_opcode
>> 16) & 0xff;
6095 /* Put out high byte first: can't use md_number_to_chars! */
6096 *p
++ = (i
.tm
.base_opcode
>> 8) & 0xff;
6097 *p
= i
.tm
.base_opcode
& 0xff;
6100 /* Now the modrm byte and sib byte (if present). */
6101 if (i
.tm
.opcode_modifier
.modrm
)
6103 FRAG_APPEND_1_CHAR ((i
.rm
.regmem
<< 0
6106 /* If i.rm.regmem == ESP (4)
6107 && i.rm.mode != (Register mode)
6109 ==> need second modrm byte. */
6110 if (i
.rm
.regmem
== ESCAPE_TO_TWO_BYTE_ADDRESSING
6112 && !(i
.base_reg
&& i
.base_reg
->reg_type
.bitfield
.reg16
))
6113 FRAG_APPEND_1_CHAR ((i
.sib
.base
<< 0
6115 | i
.sib
.scale
<< 6));
6118 if (i
.disp_operands
)
6119 output_disp (insn_start_frag
, insn_start_off
);
6122 output_imm (insn_start_frag
, insn_start_off
);
6128 pi ("" /*line*/, &i
);
6130 #endif /* DEBUG386 */
6133 /* Return the size of the displacement operand N. */
6136 disp_size (unsigned int n
)
6139 if (i
.types
[n
].bitfield
.disp64
)
6141 else if (i
.types
[n
].bitfield
.disp8
)
6143 else if (i
.types
[n
].bitfield
.disp16
)
6148 /* Return the size of the immediate operand N. */
6151 imm_size (unsigned int n
)
6154 if (i
.types
[n
].bitfield
.imm64
)
6156 else if (i
.types
[n
].bitfield
.imm8
|| i
.types
[n
].bitfield
.imm8s
)
6158 else if (i
.types
[n
].bitfield
.imm16
)
6164 output_disp (fragS
*insn_start_frag
, offsetT insn_start_off
)
6169 for (n
= 0; n
< i
.operands
; n
++)
6171 if (operand_type_check (i
.types
[n
], disp
))
6173 if (i
.op
[n
].disps
->X_op
== O_constant
)
6175 int size
= disp_size (n
);
6178 val
= offset_in_range (i
.op
[n
].disps
->X_add_number
,
6180 p
= frag_more (size
);
6181 md_number_to_chars (p
, val
, size
);
6185 enum bfd_reloc_code_real reloc_type
;
6186 int size
= disp_size (n
);
6187 int sign
= i
.types
[n
].bitfield
.disp32s
;
6188 int pcrel
= (i
.flags
[n
] & Operand_PCrel
) != 0;
6190 /* We can't have 8 bit displacement here. */
6191 gas_assert (!i
.types
[n
].bitfield
.disp8
);
6193 /* The PC relative address is computed relative
6194 to the instruction boundary, so in case immediate
6195 fields follows, we need to adjust the value. */
6196 if (pcrel
&& i
.imm_operands
)
6201 for (n1
= 0; n1
< i
.operands
; n1
++)
6202 if (operand_type_check (i
.types
[n1
], imm
))
6204 /* Only one immediate is allowed for PC
6205 relative address. */
6206 gas_assert (sz
== 0);
6208 i
.op
[n
].disps
->X_add_number
-= sz
;
6210 /* We should find the immediate. */
6211 gas_assert (sz
!= 0);
6214 p
= frag_more (size
);
6215 reloc_type
= reloc (size
, pcrel
, sign
, i
.reloc
[n
]);
6217 && GOT_symbol
== i
.op
[n
].disps
->X_add_symbol
6218 && (((reloc_type
== BFD_RELOC_32
6219 || reloc_type
== BFD_RELOC_X86_64_32S
6220 || (reloc_type
== BFD_RELOC_64
6222 && (i
.op
[n
].disps
->X_op
== O_symbol
6223 || (i
.op
[n
].disps
->X_op
== O_add
6224 && ((symbol_get_value_expression
6225 (i
.op
[n
].disps
->X_op_symbol
)->X_op
)
6227 || reloc_type
== BFD_RELOC_32_PCREL
))
6231 if (insn_start_frag
== frag_now
)
6232 add
= (p
- frag_now
->fr_literal
) - insn_start_off
;
6237 add
= insn_start_frag
->fr_fix
- insn_start_off
;
6238 for (fr
= insn_start_frag
->fr_next
;
6239 fr
&& fr
!= frag_now
; fr
= fr
->fr_next
)
6241 add
+= p
- frag_now
->fr_literal
;
6246 reloc_type
= BFD_RELOC_386_GOTPC
;
6247 i
.op
[n
].imms
->X_add_number
+= add
;
6249 else if (reloc_type
== BFD_RELOC_64
)
6250 reloc_type
= BFD_RELOC_X86_64_GOTPC64
;
6252 /* Don't do the adjustment for x86-64, as there
6253 the pcrel addressing is relative to the _next_
6254 insn, and that is taken care of in other code. */
6255 reloc_type
= BFD_RELOC_X86_64_GOTPC32
;
6257 fix_new_exp (frag_now
, p
- frag_now
->fr_literal
, size
,
6258 i
.op
[n
].disps
, pcrel
, reloc_type
);
6265 output_imm (fragS
*insn_start_frag
, offsetT insn_start_off
)
6270 for (n
= 0; n
< i
.operands
; n
++)
6272 if (operand_type_check (i
.types
[n
], imm
))
6274 if (i
.op
[n
].imms
->X_op
== O_constant
)
6276 int size
= imm_size (n
);
6279 val
= offset_in_range (i
.op
[n
].imms
->X_add_number
,
6281 p
= frag_more (size
);
6282 md_number_to_chars (p
, val
, size
);
6286 /* Not absolute_section.
6287 Need a 32-bit fixup (don't support 8bit
6288 non-absolute imms). Try to support other
6290 enum bfd_reloc_code_real reloc_type
;
6291 int size
= imm_size (n
);
6294 if (i
.types
[n
].bitfield
.imm32s
6295 && (i
.suffix
== QWORD_MNEM_SUFFIX
6296 || (!i
.suffix
&& i
.tm
.opcode_modifier
.no_lsuf
)))
6301 p
= frag_more (size
);
6302 reloc_type
= reloc (size
, 0, sign
, i
.reloc
[n
]);
6304 /* This is tough to explain. We end up with this one if we
6305 * have operands that look like
6306 * "_GLOBAL_OFFSET_TABLE_+[.-.L284]". The goal here is to
6307 * obtain the absolute address of the GOT, and it is strongly
6308 * preferable from a performance point of view to avoid using
6309 * a runtime relocation for this. The actual sequence of
6310 * instructions often look something like:
6315 * addl $_GLOBAL_OFFSET_TABLE_+[.-.L66],%ebx
6317 * The call and pop essentially return the absolute address
6318 * of the label .L66 and store it in %ebx. The linker itself
6319 * will ultimately change the first operand of the addl so
6320 * that %ebx points to the GOT, but to keep things simple, the
6321 * .o file must have this operand set so that it generates not
6322 * the absolute address of .L66, but the absolute address of
6323 * itself. This allows the linker itself simply treat a GOTPC
6324 * relocation as asking for a pcrel offset to the GOT to be
6325 * added in, and the addend of the relocation is stored in the
6326 * operand field for the instruction itself.
6328 * Our job here is to fix the operand so that it would add
6329 * the correct offset so that %ebx would point to itself. The
6330 * thing that is tricky is that .-.L66 will point to the
6331 * beginning of the instruction, so we need to further modify
6332 * the operand so that it will point to itself. There are
6333 * other cases where you have something like:
6335 * .long $_GLOBAL_OFFSET_TABLE_+[.-.L66]
6337 * and here no correction would be required. Internally in
6338 * the assembler we treat operands of this form as not being
6339 * pcrel since the '.' is explicitly mentioned, and I wonder
6340 * whether it would simplify matters to do it this way. Who
6341 * knows. In earlier versions of the PIC patches, the
6342 * pcrel_adjust field was used to store the correction, but
6343 * since the expression is not pcrel, I felt it would be
6344 * confusing to do it this way. */
6346 if ((reloc_type
== BFD_RELOC_32
6347 || reloc_type
== BFD_RELOC_X86_64_32S
6348 || reloc_type
== BFD_RELOC_64
)
6350 && GOT_symbol
== i
.op
[n
].imms
->X_add_symbol
6351 && (i
.op
[n
].imms
->X_op
== O_symbol
6352 || (i
.op
[n
].imms
->X_op
== O_add
6353 && ((symbol_get_value_expression
6354 (i
.op
[n
].imms
->X_op_symbol
)->X_op
)
6359 if (insn_start_frag
== frag_now
)
6360 add
= (p
- frag_now
->fr_literal
) - insn_start_off
;
6365 add
= insn_start_frag
->fr_fix
- insn_start_off
;
6366 for (fr
= insn_start_frag
->fr_next
;
6367 fr
&& fr
!= frag_now
; fr
= fr
->fr_next
)
6369 add
+= p
- frag_now
->fr_literal
;
6373 reloc_type
= BFD_RELOC_386_GOTPC
;
6375 reloc_type
= BFD_RELOC_X86_64_GOTPC32
;
6377 reloc_type
= BFD_RELOC_X86_64_GOTPC64
;
6378 i
.op
[n
].imms
->X_add_number
+= add
;
6380 fix_new_exp (frag_now
, p
- frag_now
->fr_literal
, size
,
6381 i
.op
[n
].imms
, 0, reloc_type
);
6387 /* x86_cons_fix_new is called via the expression parsing code when a
6388 reloc is needed. We use this hook to get the correct .got reloc. */
6389 static enum bfd_reloc_code_real got_reloc
= NO_RELOC
;
6390 static int cons_sign
= -1;
6393 x86_cons_fix_new (fragS
*frag
, unsigned int off
, unsigned int len
,
6396 enum bfd_reloc_code_real r
= reloc (len
, 0, cons_sign
, got_reloc
);
6398 got_reloc
= NO_RELOC
;
6401 if (exp
->X_op
== O_secrel
)
6403 exp
->X_op
= O_symbol
;
6404 r
= BFD_RELOC_32_SECREL
;
6408 fix_new_exp (frag
, off
, len
, exp
, 0, r
);
6411 #if (!defined (OBJ_ELF) && !defined (OBJ_MAYBE_ELF)) || defined (LEX_AT)
6412 # define lex_got(reloc, adjust, types) NULL
6414 /* Parse operands of the form
6415 <symbol>@GOTOFF+<nnn>
6416 and similar .plt or .got references.
6418 If we find one, set up the correct relocation in RELOC and copy the
6419 input string, minus the `@GOTOFF' into a malloc'd buffer for
6420 parsing by the calling routine. Return this buffer, and if ADJUST
6421 is non-null set it to the length of the string we removed from the
6422 input line. Otherwise return NULL. */
6424 lex_got (enum bfd_reloc_code_real
*rel
,
6426 i386_operand_type
*types
)
6428 /* Some of the relocations depend on the size of what field is to
6429 be relocated. But in our callers i386_immediate and i386_displacement
6430 we don't yet know the operand size (this will be set by insn
6431 matching). Hence we record the word32 relocation here,
6432 and adjust the reloc according to the real size in reloc(). */
6433 static const struct {
6436 const enum bfd_reloc_code_real rel
[2];
6437 const i386_operand_type types64
;
6439 { STRING_COMMA_LEN ("PLTOFF"), { _dummy_first_bfd_reloc_code_real
,
6440 BFD_RELOC_X86_64_PLTOFF64
},
6441 OPERAND_TYPE_IMM64
},
6442 { STRING_COMMA_LEN ("PLT"), { BFD_RELOC_386_PLT32
,
6443 BFD_RELOC_X86_64_PLT32
},
6444 OPERAND_TYPE_IMM32_32S_DISP32
},
6445 { STRING_COMMA_LEN ("GOTPLT"), { _dummy_first_bfd_reloc_code_real
,
6446 BFD_RELOC_X86_64_GOTPLT64
},
6447 OPERAND_TYPE_IMM64_DISP64
},
6448 { STRING_COMMA_LEN ("GOTOFF"), { BFD_RELOC_386_GOTOFF
,
6449 BFD_RELOC_X86_64_GOTOFF64
},
6450 OPERAND_TYPE_IMM64_DISP64
},
6451 { STRING_COMMA_LEN ("GOTPCREL"), { _dummy_first_bfd_reloc_code_real
,
6452 BFD_RELOC_X86_64_GOTPCREL
},
6453 OPERAND_TYPE_IMM32_32S_DISP32
},
6454 { STRING_COMMA_LEN ("TLSGD"), { BFD_RELOC_386_TLS_GD
,
6455 BFD_RELOC_X86_64_TLSGD
},
6456 OPERAND_TYPE_IMM32_32S_DISP32
},
6457 { STRING_COMMA_LEN ("TLSLDM"), { BFD_RELOC_386_TLS_LDM
,
6458 _dummy_first_bfd_reloc_code_real
},
6459 OPERAND_TYPE_NONE
},
6460 { STRING_COMMA_LEN ("TLSLD"), { _dummy_first_bfd_reloc_code_real
,
6461 BFD_RELOC_X86_64_TLSLD
},
6462 OPERAND_TYPE_IMM32_32S_DISP32
},
6463 { STRING_COMMA_LEN ("GOTTPOFF"), { BFD_RELOC_386_TLS_IE_32
,
6464 BFD_RELOC_X86_64_GOTTPOFF
},
6465 OPERAND_TYPE_IMM32_32S_DISP32
},
6466 { STRING_COMMA_LEN ("TPOFF"), { BFD_RELOC_386_TLS_LE_32
,
6467 BFD_RELOC_X86_64_TPOFF32
},
6468 OPERAND_TYPE_IMM32_32S_64_DISP32_64
},
6469 { STRING_COMMA_LEN ("NTPOFF"), { BFD_RELOC_386_TLS_LE
,
6470 _dummy_first_bfd_reloc_code_real
},
6471 OPERAND_TYPE_NONE
},
6472 { STRING_COMMA_LEN ("DTPOFF"), { BFD_RELOC_386_TLS_LDO_32
,
6473 BFD_RELOC_X86_64_DTPOFF32
},
6474 OPERAND_TYPE_IMM32_32S_64_DISP32_64
},
6475 { STRING_COMMA_LEN ("GOTNTPOFF"),{ BFD_RELOC_386_TLS_GOTIE
,
6476 _dummy_first_bfd_reloc_code_real
},
6477 OPERAND_TYPE_NONE
},
6478 { STRING_COMMA_LEN ("INDNTPOFF"),{ BFD_RELOC_386_TLS_IE
,
6479 _dummy_first_bfd_reloc_code_real
},
6480 OPERAND_TYPE_NONE
},
6481 { STRING_COMMA_LEN ("GOT"), { BFD_RELOC_386_GOT32
,
6482 BFD_RELOC_X86_64_GOT32
},
6483 OPERAND_TYPE_IMM32_32S_64_DISP32
},
6484 { STRING_COMMA_LEN ("TLSDESC"), { BFD_RELOC_386_TLS_GOTDESC
,
6485 BFD_RELOC_X86_64_GOTPC32_TLSDESC
},
6486 OPERAND_TYPE_IMM32_32S_DISP32
},
6487 { STRING_COMMA_LEN ("TLSCALL"), { BFD_RELOC_386_TLS_DESC_CALL
,
6488 BFD_RELOC_X86_64_TLSDESC_CALL
},
6489 OPERAND_TYPE_IMM32_32S_DISP32
},
6497 for (cp
= input_line_pointer
; *cp
!= '@'; cp
++)
6498 if (is_end_of_line
[(unsigned char) *cp
] || *cp
== ',')
6501 for (j
= 0; j
< ARRAY_SIZE (gotrel
); j
++)
6503 int len
= gotrel
[j
].len
;
6504 if (strncasecmp (cp
+ 1, gotrel
[j
].str
, len
) == 0)
6506 if (gotrel
[j
].rel
[object_64bit
] != 0)
6509 char *tmpbuf
, *past_reloc
;
6511 *rel
= gotrel
[j
].rel
[object_64bit
];
6517 if (flag_code
!= CODE_64BIT
)
6519 types
->bitfield
.imm32
= 1;
6520 types
->bitfield
.disp32
= 1;
6523 *types
= gotrel
[j
].types64
;
6526 if (GOT_symbol
== NULL
)
6527 GOT_symbol
= symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME
);
6529 /* The length of the first part of our input line. */
6530 first
= cp
- input_line_pointer
;
6532 /* The second part goes from after the reloc token until
6533 (and including) an end_of_line char or comma. */
6534 past_reloc
= cp
+ 1 + len
;
6536 while (!is_end_of_line
[(unsigned char) *cp
] && *cp
!= ',')
6538 second
= cp
+ 1 - past_reloc
;
6540 /* Allocate and copy string. The trailing NUL shouldn't
6541 be necessary, but be safe. */
6542 tmpbuf
= (char *) xmalloc (first
+ second
+ 2);
6543 memcpy (tmpbuf
, input_line_pointer
, first
);
6544 if (second
!= 0 && *past_reloc
!= ' ')
6545 /* Replace the relocation token with ' ', so that
6546 errors like foo@GOTOFF1 will be detected. */
6547 tmpbuf
[first
++] = ' ';
6548 memcpy (tmpbuf
+ first
, past_reloc
, second
);
6549 tmpbuf
[first
+ second
] = '\0';
6553 as_bad (_("@%s reloc is not supported with %d-bit output format"),
6554 gotrel
[j
].str
, 1 << (5 + object_64bit
));
6559 /* Might be a symbol version string. Don't as_bad here. */
6564 x86_cons (expressionS
*exp
, int size
)
6566 intel_syntax
= -intel_syntax
;
6569 if (size
== 4 || (object_64bit
&& size
== 8))
6571 /* Handle @GOTOFF and the like in an expression. */
6573 char *gotfree_input_line
;
6576 save
= input_line_pointer
;
6577 gotfree_input_line
= lex_got (&got_reloc
, &adjust
, NULL
);
6578 if (gotfree_input_line
)
6579 input_line_pointer
= gotfree_input_line
;
6583 if (gotfree_input_line
)
6585 /* expression () has merrily parsed up to the end of line,
6586 or a comma - in the wrong buffer. Transfer how far
6587 input_line_pointer has moved to the right buffer. */
6588 input_line_pointer
= (save
6589 + (input_line_pointer
- gotfree_input_line
)
6591 free (gotfree_input_line
);
6592 if (exp
->X_op
== O_constant
6593 || exp
->X_op
== O_absent
6594 || exp
->X_op
== O_illegal
6595 || exp
->X_op
== O_register
6596 || exp
->X_op
== O_big
)
6598 char c
= *input_line_pointer
;
6599 *input_line_pointer
= 0;
6600 as_bad (_("missing or invalid expression `%s'"), save
);
6601 *input_line_pointer
= c
;
6608 intel_syntax
= -intel_syntax
;
6611 i386_intel_simplify (exp
);
6616 signed_cons (int size
)
6618 if (flag_code
== CODE_64BIT
)
6626 pe_directive_secrel (dummy
)
6627 int dummy ATTRIBUTE_UNUSED
;
6634 if (exp
.X_op
== O_symbol
)
6635 exp
.X_op
= O_secrel
;
6637 emit_expr (&exp
, 4);
6639 while (*input_line_pointer
++ == ',');
6641 input_line_pointer
--;
6642 demand_empty_rest_of_line ();
6647 i386_immediate (char *imm_start
)
6649 char *save_input_line_pointer
;
6650 char *gotfree_input_line
;
6653 i386_operand_type types
;
6655 operand_type_set (&types
, ~0);
6657 if (i
.imm_operands
== MAX_IMMEDIATE_OPERANDS
)
6659 as_bad (_("at most %d immediate operands are allowed"),
6660 MAX_IMMEDIATE_OPERANDS
);
6664 exp
= &im_expressions
[i
.imm_operands
++];
6665 i
.op
[this_operand
].imms
= exp
;
6667 if (is_space_char (*imm_start
))
6670 save_input_line_pointer
= input_line_pointer
;
6671 input_line_pointer
= imm_start
;
6673 gotfree_input_line
= lex_got (&i
.reloc
[this_operand
], NULL
, &types
);
6674 if (gotfree_input_line
)
6675 input_line_pointer
= gotfree_input_line
;
6677 exp_seg
= expression (exp
);
6680 if (*input_line_pointer
)
6681 as_bad (_("junk `%s' after expression"), input_line_pointer
);
6683 input_line_pointer
= save_input_line_pointer
;
6684 if (gotfree_input_line
)
6686 free (gotfree_input_line
);
6688 if (exp
->X_op
== O_constant
|| exp
->X_op
== O_register
)
6689 exp
->X_op
= O_illegal
;
6692 return i386_finalize_immediate (exp_seg
, exp
, types
, imm_start
);
6696 i386_finalize_immediate (segT exp_seg ATTRIBUTE_UNUSED
, expressionS
*exp
,
6697 i386_operand_type types
, const char *imm_start
)
6699 if (exp
->X_op
== O_absent
|| exp
->X_op
== O_illegal
|| exp
->X_op
== O_big
)
6702 as_bad (_("missing or invalid immediate expression `%s'"),
6706 else if (exp
->X_op
== O_constant
)
6708 /* Size it properly later. */
6709 i
.types
[this_operand
].bitfield
.imm64
= 1;
6710 /* If not 64bit, sign extend val. */
6711 if (flag_code
!= CODE_64BIT
6712 && (exp
->X_add_number
& ~(((addressT
) 2 << 31) - 1)) == 0)
6714 = (exp
->X_add_number
^ ((addressT
) 1 << 31)) - ((addressT
) 1 << 31);
6716 #if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
6717 else if (OUTPUT_FLAVOR
== bfd_target_aout_flavour
6718 && exp_seg
!= absolute_section
6719 && exp_seg
!= text_section
6720 && exp_seg
!= data_section
6721 && exp_seg
!= bss_section
6722 && exp_seg
!= undefined_section
6723 && !bfd_is_com_section (exp_seg
))
6725 as_bad (_("unimplemented segment %s in operand"), exp_seg
->name
);
6729 else if (!intel_syntax
&& exp
->X_op
== O_register
)
6732 as_bad (_("illegal immediate register operand %s"), imm_start
);
6737 /* This is an address. The size of the address will be
6738 determined later, depending on destination register,
6739 suffix, or the default for the section. */
6740 i
.types
[this_operand
].bitfield
.imm8
= 1;
6741 i
.types
[this_operand
].bitfield
.imm16
= 1;
6742 i
.types
[this_operand
].bitfield
.imm32
= 1;
6743 i
.types
[this_operand
].bitfield
.imm32s
= 1;
6744 i
.types
[this_operand
].bitfield
.imm64
= 1;
6745 i
.types
[this_operand
] = operand_type_and (i
.types
[this_operand
],
6753 i386_scale (char *scale
)
6756 char *save
= input_line_pointer
;
6758 input_line_pointer
= scale
;
6759 val
= get_absolute_expression ();
6764 i
.log2_scale_factor
= 0;
6767 i
.log2_scale_factor
= 1;
6770 i
.log2_scale_factor
= 2;
6773 i
.log2_scale_factor
= 3;
6777 char sep
= *input_line_pointer
;
6779 *input_line_pointer
= '\0';
6780 as_bad (_("expecting scale factor of 1, 2, 4, or 8: got `%s'"),
6782 *input_line_pointer
= sep
;
6783 input_line_pointer
= save
;
6787 if (i
.log2_scale_factor
!= 0 && i
.index_reg
== 0)
6789 as_warn (_("scale factor of %d without an index register"),
6790 1 << i
.log2_scale_factor
);
6791 i
.log2_scale_factor
= 0;
6793 scale
= input_line_pointer
;
6794 input_line_pointer
= save
;
6799 i386_displacement (char *disp_start
, char *disp_end
)
6803 char *save_input_line_pointer
;
6804 char *gotfree_input_line
;
6806 i386_operand_type bigdisp
, types
= anydisp
;
6809 if (i
.disp_operands
== MAX_MEMORY_OPERANDS
)
6811 as_bad (_("at most %d displacement operands are allowed"),
6812 MAX_MEMORY_OPERANDS
);
6816 operand_type_set (&bigdisp
, 0);
6817 if ((i
.types
[this_operand
].bitfield
.jumpabsolute
)
6818 || (!current_templates
->start
->opcode_modifier
.jump
6819 && !current_templates
->start
->opcode_modifier
.jumpdword
))
6821 bigdisp
.bitfield
.disp32
= 1;
6822 override
= (i
.prefix
[ADDR_PREFIX
] != 0);
6823 if (flag_code
== CODE_64BIT
)
6827 bigdisp
.bitfield
.disp32s
= 1;
6828 bigdisp
.bitfield
.disp64
= 1;
6831 else if ((flag_code
== CODE_16BIT
) ^ override
)
6833 bigdisp
.bitfield
.disp32
= 0;
6834 bigdisp
.bitfield
.disp16
= 1;
6839 /* For PC-relative branches, the width of the displacement
6840 is dependent upon data size, not address size. */
6841 override
= (i
.prefix
[DATA_PREFIX
] != 0);
6842 if (flag_code
== CODE_64BIT
)
6844 if (override
|| i
.suffix
== WORD_MNEM_SUFFIX
)
6845 bigdisp
.bitfield
.disp16
= 1;
6848 bigdisp
.bitfield
.disp32
= 1;
6849 bigdisp
.bitfield
.disp32s
= 1;
6855 override
= (i
.suffix
== (flag_code
!= CODE_16BIT
6857 : LONG_MNEM_SUFFIX
));
6858 bigdisp
.bitfield
.disp32
= 1;
6859 if ((flag_code
== CODE_16BIT
) ^ override
)
6861 bigdisp
.bitfield
.disp32
= 0;
6862 bigdisp
.bitfield
.disp16
= 1;
6866 i
.types
[this_operand
] = operand_type_or (i
.types
[this_operand
],
6869 exp
= &disp_expressions
[i
.disp_operands
];
6870 i
.op
[this_operand
].disps
= exp
;
6872 save_input_line_pointer
= input_line_pointer
;
6873 input_line_pointer
= disp_start
;
6874 END_STRING_AND_SAVE (disp_end
);
6876 #ifndef GCC_ASM_O_HACK
6877 #define GCC_ASM_O_HACK 0
6880 END_STRING_AND_SAVE (disp_end
+ 1);
6881 if (i
.types
[this_operand
].bitfield
.baseIndex
6882 && displacement_string_end
[-1] == '+')
6884 /* This hack is to avoid a warning when using the "o"
6885 constraint within gcc asm statements.
6888 #define _set_tssldt_desc(n,addr,limit,type) \
6889 __asm__ __volatile__ ( \
6891 "movw %w1,2+%0\n\t" \
6893 "movb %b1,4+%0\n\t" \
6894 "movb %4,5+%0\n\t" \
6895 "movb $0,6+%0\n\t" \
6896 "movb %h1,7+%0\n\t" \
6898 : "=o"(*(n)) : "q" (addr), "ri"(limit), "i"(type))
6900 This works great except that the output assembler ends
6901 up looking a bit weird if it turns out that there is
6902 no offset. You end up producing code that looks like:
6915 So here we provide the missing zero. */
6917 *displacement_string_end
= '0';
6920 gotfree_input_line
= lex_got (&i
.reloc
[this_operand
], NULL
, &types
);
6921 if (gotfree_input_line
)
6922 input_line_pointer
= gotfree_input_line
;
6924 exp_seg
= expression (exp
);
6927 if (*input_line_pointer
)
6928 as_bad (_("junk `%s' after expression"), input_line_pointer
);
6930 RESTORE_END_STRING (disp_end
+ 1);
6932 input_line_pointer
= save_input_line_pointer
;
6933 if (gotfree_input_line
)
6935 free (gotfree_input_line
);
6937 if (exp
->X_op
== O_constant
|| exp
->X_op
== O_register
)
6938 exp
->X_op
= O_illegal
;
6941 ret
= i386_finalize_displacement (exp_seg
, exp
, types
, disp_start
);
6943 RESTORE_END_STRING (disp_end
);
6949 i386_finalize_displacement (segT exp_seg ATTRIBUTE_UNUSED
, expressionS
*exp
,
6950 i386_operand_type types
, const char *disp_start
)
6952 i386_operand_type bigdisp
;
6955 /* We do this to make sure that the section symbol is in
6956 the symbol table. We will ultimately change the relocation
6957 to be relative to the beginning of the section. */
6958 if (i
.reloc
[this_operand
] == BFD_RELOC_386_GOTOFF
6959 || i
.reloc
[this_operand
] == BFD_RELOC_X86_64_GOTPCREL
6960 || i
.reloc
[this_operand
] == BFD_RELOC_X86_64_GOTOFF64
)
6962 if (exp
->X_op
!= O_symbol
)
6965 if (S_IS_LOCAL (exp
->X_add_symbol
)
6966 && S_GET_SEGMENT (exp
->X_add_symbol
) != undefined_section
6967 && S_GET_SEGMENT (exp
->X_add_symbol
) != expr_section
)
6968 section_symbol (S_GET_SEGMENT (exp
->X_add_symbol
));
6969 exp
->X_op
= O_subtract
;
6970 exp
->X_op_symbol
= GOT_symbol
;
6971 if (i
.reloc
[this_operand
] == BFD_RELOC_X86_64_GOTPCREL
)
6972 i
.reloc
[this_operand
] = BFD_RELOC_32_PCREL
;
6973 else if (i
.reloc
[this_operand
] == BFD_RELOC_X86_64_GOTOFF64
)
6974 i
.reloc
[this_operand
] = BFD_RELOC_64
;
6976 i
.reloc
[this_operand
] = BFD_RELOC_32
;
6979 else if (exp
->X_op
== O_absent
6980 || exp
->X_op
== O_illegal
6981 || exp
->X_op
== O_big
)
6984 as_bad (_("missing or invalid displacement expression `%s'"),
6989 else if (flag_code
== CODE_64BIT
6990 && !i
.prefix
[ADDR_PREFIX
]
6991 && exp
->X_op
== O_constant
)
6993 /* Since displacement is signed extended to 64bit, don't allow
6994 disp32 and turn off disp32s if they are out of range. */
6995 i
.types
[this_operand
].bitfield
.disp32
= 0;
6996 if (!fits_in_signed_long (exp
->X_add_number
))
6998 i
.types
[this_operand
].bitfield
.disp32s
= 0;
6999 if (i
.types
[this_operand
].bitfield
.baseindex
)
7001 as_bad (_("0x%lx out range of signed 32bit displacement"),
7002 (long) exp
->X_add_number
);
7008 #if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
7009 else if (exp
->X_op
!= O_constant
7010 && OUTPUT_FLAVOR
== bfd_target_aout_flavour
7011 && exp_seg
!= absolute_section
7012 && exp_seg
!= text_section
7013 && exp_seg
!= data_section
7014 && exp_seg
!= bss_section
7015 && exp_seg
!= undefined_section
7016 && !bfd_is_com_section (exp_seg
))
7018 as_bad (_("unimplemented segment %s in operand"), exp_seg
->name
);
7023 /* Check if this is a displacement only operand. */
7024 bigdisp
= i
.types
[this_operand
];
7025 bigdisp
.bitfield
.disp8
= 0;
7026 bigdisp
.bitfield
.disp16
= 0;
7027 bigdisp
.bitfield
.disp32
= 0;
7028 bigdisp
.bitfield
.disp32s
= 0;
7029 bigdisp
.bitfield
.disp64
= 0;
7030 if (operand_type_all_zero (&bigdisp
))
7031 i
.types
[this_operand
] = operand_type_and (i
.types
[this_operand
],
7037 /* Make sure the memory operand we've been dealt is valid.
7038 Return 1 on success, 0 on a failure. */
7041 i386_index_check (const char *operand_string
)
7044 const char *kind
= "base/index";
7045 #if INFER_ADDR_PREFIX
7051 if (current_templates
->start
->opcode_modifier
.isstring
7052 && !current_templates
->start
->opcode_modifier
.immext
7053 && (current_templates
->end
[-1].opcode_modifier
.isstring
7056 /* Memory operands of string insns are special in that they only allow
7057 a single register (rDI, rSI, or rBX) as their memory address. */
7058 unsigned int expected
;
7060 kind
= "string address";
7062 if (current_templates
->start
->opcode_modifier
.w
)
7064 i386_operand_type type
= current_templates
->end
[-1].operand_types
[0];
7066 if (!type
.bitfield
.baseindex
7067 || ((!i
.mem_operands
!= !intel_syntax
)
7068 && current_templates
->end
[-1].operand_types
[1]
7069 .bitfield
.baseindex
))
7070 type
= current_templates
->end
[-1].operand_types
[1];
7071 expected
= type
.bitfield
.esseg
? 7 /* rDI */ : 6 /* rSI */;
7074 expected
= 3 /* rBX */;
7076 if (!i
.base_reg
|| i
.index_reg
7077 || operand_type_check (i
.types
[this_operand
], disp
))
7079 else if (!(flag_code
== CODE_64BIT
7080 ? i
.prefix
[ADDR_PREFIX
]
7081 ? i
.base_reg
->reg_type
.bitfield
.reg32
7082 : i
.base_reg
->reg_type
.bitfield
.reg64
7083 : (flag_code
== CODE_16BIT
) ^ !i
.prefix
[ADDR_PREFIX
]
7084 ? i
.base_reg
->reg_type
.bitfield
.reg32
7085 : i
.base_reg
->reg_type
.bitfield
.reg16
))
7087 else if (i
.base_reg
->reg_num
!= expected
)
7094 for (j
= 0; j
< i386_regtab_size
; ++j
)
7095 if ((flag_code
== CODE_64BIT
7096 ? i
.prefix
[ADDR_PREFIX
]
7097 ? i386_regtab
[j
].reg_type
.bitfield
.reg32
7098 : i386_regtab
[j
].reg_type
.bitfield
.reg64
7099 : (flag_code
== CODE_16BIT
) ^ !i
.prefix
[ADDR_PREFIX
]
7100 ? i386_regtab
[j
].reg_type
.bitfield
.reg32
7101 : i386_regtab
[j
].reg_type
.bitfield
.reg16
)
7102 && i386_regtab
[j
].reg_num
== expected
)
7104 gas_assert (j
< i386_regtab_size
);
7105 as_warn (_("`%s' is not valid here (expected `%c%s%s%c')"),
7107 intel_syntax
? '[' : '(',
7109 i386_regtab
[j
].reg_name
,
7110 intel_syntax
? ']' : ')');
7114 else if (flag_code
== CODE_64BIT
)
7117 && ((i
.prefix
[ADDR_PREFIX
] == 0
7118 && !i
.base_reg
->reg_type
.bitfield
.reg64
)
7119 || (i
.prefix
[ADDR_PREFIX
]
7120 && !i
.base_reg
->reg_type
.bitfield
.reg32
))
7122 || i
.base_reg
->reg_num
!=
7123 (i
.prefix
[ADDR_PREFIX
] == 0 ? RegRip
: RegEip
)))
7125 && (!i
.index_reg
->reg_type
.bitfield
.baseindex
7126 || (i
.prefix
[ADDR_PREFIX
] == 0
7127 && i
.index_reg
->reg_num
!= RegRiz
7128 && !i
.index_reg
->reg_type
.bitfield
.reg64
7130 || (i
.prefix
[ADDR_PREFIX
]
7131 && i
.index_reg
->reg_num
!= RegEiz
7132 && !i
.index_reg
->reg_type
.bitfield
.reg32
))))
7137 if ((flag_code
== CODE_16BIT
) ^ (i
.prefix
[ADDR_PREFIX
] != 0))
7141 && (!i
.base_reg
->reg_type
.bitfield
.reg16
7142 || !i
.base_reg
->reg_type
.bitfield
.baseindex
))
7144 && (!i
.index_reg
->reg_type
.bitfield
.reg16
7145 || !i
.index_reg
->reg_type
.bitfield
.baseindex
7147 && i
.base_reg
->reg_num
< 6
7148 && i
.index_reg
->reg_num
>= 6
7149 && i
.log2_scale_factor
== 0))))
7156 && !i
.base_reg
->reg_type
.bitfield
.reg32
)
7158 && ((!i
.index_reg
->reg_type
.bitfield
.reg32
7159 && i
.index_reg
->reg_num
!= RegEiz
)
7160 || !i
.index_reg
->reg_type
.bitfield
.baseindex
)))
7166 #if INFER_ADDR_PREFIX
7167 if (!i
.mem_operands
&& !i
.prefix
[ADDR_PREFIX
])
7169 i
.prefix
[ADDR_PREFIX
] = ADDR_PREFIX_OPCODE
;
7171 /* Change the size of any displacement too. At most one of
7172 Disp16 or Disp32 is set.
7173 FIXME. There doesn't seem to be any real need for separate
7174 Disp16 and Disp32 flags. The same goes for Imm16 and Imm32.
7175 Removing them would probably clean up the code quite a lot. */
7176 if (flag_code
!= CODE_64BIT
7177 && (i
.types
[this_operand
].bitfield
.disp16
7178 || i
.types
[this_operand
].bitfield
.disp32
))
7179 i
.types
[this_operand
]
7180 = operand_type_xor (i
.types
[this_operand
], disp16_32
);
7185 as_bad (_("`%s' is not a valid %s expression"),
7190 as_bad (_("`%s' is not a valid %s-bit %s expression"),
7192 flag_code_names
[i
.prefix
[ADDR_PREFIX
]
7193 ? flag_code
== CODE_32BIT
7202 /* Parse OPERAND_STRING into the i386_insn structure I. Returns zero
7206 i386_att_operand (char *operand_string
)
7210 char *op_string
= operand_string
;
7212 if (is_space_char (*op_string
))
7215 /* We check for an absolute prefix (differentiating,
7216 for example, 'jmp pc_relative_label' from 'jmp *absolute_label'. */
7217 if (*op_string
== ABSOLUTE_PREFIX
)
7220 if (is_space_char (*op_string
))
7222 i
.types
[this_operand
].bitfield
.jumpabsolute
= 1;
7225 /* Check if operand is a register. */
7226 if ((r
= parse_register (op_string
, &end_op
)) != NULL
)
7228 i386_operand_type temp
;
7230 /* Check for a segment override by searching for ':' after a
7231 segment register. */
7233 if (is_space_char (*op_string
))
7235 if (*op_string
== ':'
7236 && (r
->reg_type
.bitfield
.sreg2
7237 || r
->reg_type
.bitfield
.sreg3
))
7242 i
.seg
[i
.mem_operands
] = &es
;
7245 i
.seg
[i
.mem_operands
] = &cs
;
7248 i
.seg
[i
.mem_operands
] = &ss
;
7251 i
.seg
[i
.mem_operands
] = &ds
;
7254 i
.seg
[i
.mem_operands
] = &fs
;
7257 i
.seg
[i
.mem_operands
] = &gs
;
7261 /* Skip the ':' and whitespace. */
7263 if (is_space_char (*op_string
))
7266 if (!is_digit_char (*op_string
)
7267 && !is_identifier_char (*op_string
)
7268 && *op_string
!= '('
7269 && *op_string
!= ABSOLUTE_PREFIX
)
7271 as_bad (_("bad memory operand `%s'"), op_string
);
7274 /* Handle case of %es:*foo. */
7275 if (*op_string
== ABSOLUTE_PREFIX
)
7278 if (is_space_char (*op_string
))
7280 i
.types
[this_operand
].bitfield
.jumpabsolute
= 1;
7282 goto do_memory_reference
;
7286 as_bad (_("junk `%s' after register"), op_string
);
7290 temp
.bitfield
.baseindex
= 0;
7291 i
.types
[this_operand
] = operand_type_or (i
.types
[this_operand
],
7293 i
.types
[this_operand
].bitfield
.unspecified
= 0;
7294 i
.op
[this_operand
].regs
= r
;
7297 else if (*op_string
== REGISTER_PREFIX
)
7299 as_bad (_("bad register name `%s'"), op_string
);
7302 else if (*op_string
== IMMEDIATE_PREFIX
)
7305 if (i
.types
[this_operand
].bitfield
.jumpabsolute
)
7307 as_bad (_("immediate operand illegal with absolute jump"));
7310 if (!i386_immediate (op_string
))
7313 else if (is_digit_char (*op_string
)
7314 || is_identifier_char (*op_string
)
7315 || *op_string
== '(')
7317 /* This is a memory reference of some sort. */
7320 /* Start and end of displacement string expression (if found). */
7321 char *displacement_string_start
;
7322 char *displacement_string_end
;
7324 do_memory_reference
:
7325 if ((i
.mem_operands
== 1
7326 && !current_templates
->start
->opcode_modifier
.isstring
)
7327 || i
.mem_operands
== 2)
7329 as_bad (_("too many memory references for `%s'"),
7330 current_templates
->start
->name
);
7334 /* Check for base index form. We detect the base index form by
7335 looking for an ')' at the end of the operand, searching
7336 for the '(' matching it, and finding a REGISTER_PREFIX or ','
7338 base_string
= op_string
+ strlen (op_string
);
7341 if (is_space_char (*base_string
))
7344 /* If we only have a displacement, set-up for it to be parsed later. */
7345 displacement_string_start
= op_string
;
7346 displacement_string_end
= base_string
+ 1;
7348 if (*base_string
== ')')
7351 unsigned int parens_balanced
= 1;
7352 /* We've already checked that the number of left & right ()'s are
7353 equal, so this loop will not be infinite. */
7357 if (*base_string
== ')')
7359 if (*base_string
== '(')
7362 while (parens_balanced
);
7364 temp_string
= base_string
;
7366 /* Skip past '(' and whitespace. */
7368 if (is_space_char (*base_string
))
7371 if (*base_string
== ','
7372 || ((i
.base_reg
= parse_register (base_string
, &end_op
))
7375 displacement_string_end
= temp_string
;
7377 i
.types
[this_operand
].bitfield
.baseindex
= 1;
7381 base_string
= end_op
;
7382 if (is_space_char (*base_string
))
7386 /* There may be an index reg or scale factor here. */
7387 if (*base_string
== ',')
7390 if (is_space_char (*base_string
))
7393 if ((i
.index_reg
= parse_register (base_string
, &end_op
))
7396 base_string
= end_op
;
7397 if (is_space_char (*base_string
))
7399 if (*base_string
== ',')
7402 if (is_space_char (*base_string
))
7405 else if (*base_string
!= ')')
7407 as_bad (_("expecting `,' or `)' "
7408 "after index register in `%s'"),
7413 else if (*base_string
== REGISTER_PREFIX
)
7415 as_bad (_("bad register name `%s'"), base_string
);
7419 /* Check for scale factor. */
7420 if (*base_string
!= ')')
7422 char *end_scale
= i386_scale (base_string
);
7427 base_string
= end_scale
;
7428 if (is_space_char (*base_string
))
7430 if (*base_string
!= ')')
7432 as_bad (_("expecting `)' "
7433 "after scale factor in `%s'"),
7438 else if (!i
.index_reg
)
7440 as_bad (_("expecting index register or scale factor "
7441 "after `,'; got '%c'"),
7446 else if (*base_string
!= ')')
7448 as_bad (_("expecting `,' or `)' "
7449 "after base register in `%s'"),
7454 else if (*base_string
== REGISTER_PREFIX
)
7456 as_bad (_("bad register name `%s'"), base_string
);
7461 /* If there's an expression beginning the operand, parse it,
7462 assuming displacement_string_start and
7463 displacement_string_end are meaningful. */
7464 if (displacement_string_start
!= displacement_string_end
)
7466 if (!i386_displacement (displacement_string_start
,
7467 displacement_string_end
))
7471 /* Special case for (%dx) while doing input/output op. */
7473 && operand_type_equal (&i
.base_reg
->reg_type
,
7474 ®16_inoutportreg
)
7476 && i
.log2_scale_factor
== 0
7477 && i
.seg
[i
.mem_operands
] == 0
7478 && !operand_type_check (i
.types
[this_operand
], disp
))
7480 i
.types
[this_operand
] = inoutportreg
;
7484 if (i386_index_check (operand_string
) == 0)
7486 i
.types
[this_operand
].bitfield
.mem
= 1;
7491 /* It's not a memory operand; argh! */
7492 as_bad (_("invalid char %s beginning operand %d `%s'"),
7493 output_invalid (*op_string
),
7498 return 1; /* Normal return. */
7501 /* md_estimate_size_before_relax()
7503 Called just before relax() for rs_machine_dependent frags. The x86
7504 assembler uses these frags to handle variable size jump
7507 Any symbol that is now undefined will not become defined.
7508 Return the correct fr_subtype in the frag.
7509 Return the initial "guess for variable size of frag" to caller.
7510 The guess is actually the growth beyond the fixed part. Whatever
7511 we do to grow the fixed or variable part contributes to our
7515 md_estimate_size_before_relax (fragP
, segment
)
7519 /* We've already got fragP->fr_subtype right; all we have to do is
7520 check for un-relaxable symbols. On an ELF system, we can't relax
7521 an externally visible symbol, because it may be overridden by a
7523 if (S_GET_SEGMENT (fragP
->fr_symbol
) != segment
7524 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
7526 && (S_IS_EXTERNAL (fragP
->fr_symbol
)
7527 || S_IS_WEAK (fragP
->fr_symbol
)
7528 || ((symbol_get_bfdsym (fragP
->fr_symbol
)->flags
7529 & BSF_GNU_INDIRECT_FUNCTION
))))
7531 #if defined (OBJ_COFF) && defined (TE_PE)
7532 || (OUTPUT_FLAVOR
== bfd_target_coff_flavour
7533 && S_IS_WEAK (fragP
->fr_symbol
))
7537 /* Symbol is undefined in this segment, or we need to keep a
7538 reloc so that weak symbols can be overridden. */
7539 int size
= (fragP
->fr_subtype
& CODE16
) ? 2 : 4;
7540 enum bfd_reloc_code_real reloc_type
;
7541 unsigned char *opcode
;
7544 if (fragP
->fr_var
!= NO_RELOC
)
7545 reloc_type
= (enum bfd_reloc_code_real
) fragP
->fr_var
;
7547 reloc_type
= BFD_RELOC_16_PCREL
;
7549 reloc_type
= BFD_RELOC_32_PCREL
;
7551 old_fr_fix
= fragP
->fr_fix
;
7552 opcode
= (unsigned char *) fragP
->fr_opcode
;
7554 switch (TYPE_FROM_RELAX_STATE (fragP
->fr_subtype
))
7557 /* Make jmp (0xeb) a (d)word displacement jump. */
7559 fragP
->fr_fix
+= size
;
7560 fix_new (fragP
, old_fr_fix
, size
,
7562 fragP
->fr_offset
, 1,
7568 && (!no_cond_jump_promotion
|| fragP
->fr_var
!= NO_RELOC
))
7570 /* Negate the condition, and branch past an
7571 unconditional jump. */
7574 /* Insert an unconditional jump. */
7576 /* We added two extra opcode bytes, and have a two byte
7578 fragP
->fr_fix
+= 2 + 2;
7579 fix_new (fragP
, old_fr_fix
+ 2, 2,
7581 fragP
->fr_offset
, 1,
7588 if (no_cond_jump_promotion
&& fragP
->fr_var
== NO_RELOC
)
7593 fixP
= fix_new (fragP
, old_fr_fix
, 1,
7595 fragP
->fr_offset
, 1,
7597 fixP
->fx_signed
= 1;
7601 /* This changes the byte-displacement jump 0x7N
7602 to the (d)word-displacement jump 0x0f,0x8N. */
7603 opcode
[1] = opcode
[0] + 0x10;
7604 opcode
[0] = TWO_BYTE_OPCODE_ESCAPE
;
7605 /* We've added an opcode byte. */
7606 fragP
->fr_fix
+= 1 + size
;
7607 fix_new (fragP
, old_fr_fix
+ 1, size
,
7609 fragP
->fr_offset
, 1,
7614 BAD_CASE (fragP
->fr_subtype
);
7618 return fragP
->fr_fix
- old_fr_fix
;
7621 /* Guess size depending on current relax state. Initially the relax
7622 state will correspond to a short jump and we return 1, because
7623 the variable part of the frag (the branch offset) is one byte
7624 long. However, we can relax a section more than once and in that
7625 case we must either set fr_subtype back to the unrelaxed state,
7626 or return the value for the appropriate branch. */
7627 return md_relax_table
[fragP
->fr_subtype
].rlx_length
;
7630 /* Called after relax() is finished.
7632 In: Address of frag.
7633 fr_type == rs_machine_dependent.
7634 fr_subtype is what the address relaxed to.
7636 Out: Any fixSs and constants are set up.
7637 Caller will turn frag into a ".space 0". */
7640 md_convert_frag (abfd
, sec
, fragP
)
7641 bfd
*abfd ATTRIBUTE_UNUSED
;
7642 segT sec ATTRIBUTE_UNUSED
;
7645 unsigned char *opcode
;
7646 unsigned char *where_to_put_displacement
= NULL
;
7647 offsetT target_address
;
7648 offsetT opcode_address
;
7649 unsigned int extension
= 0;
7650 offsetT displacement_from_opcode_start
;
7652 opcode
= (unsigned char *) fragP
->fr_opcode
;
7654 /* Address we want to reach in file space. */
7655 target_address
= S_GET_VALUE (fragP
->fr_symbol
) + fragP
->fr_offset
;
7657 /* Address opcode resides at in file space. */
7658 opcode_address
= fragP
->fr_address
+ fragP
->fr_fix
;
7660 /* Displacement from opcode start to fill into instruction. */
7661 displacement_from_opcode_start
= target_address
- opcode_address
;
7663 if ((fragP
->fr_subtype
& BIG
) == 0)
7665 /* Don't have to change opcode. */
7666 extension
= 1; /* 1 opcode + 1 displacement */
7667 where_to_put_displacement
= &opcode
[1];
7671 if (no_cond_jump_promotion
7672 && TYPE_FROM_RELAX_STATE (fragP
->fr_subtype
) != UNCOND_JUMP
)
7673 as_warn_where (fragP
->fr_file
, fragP
->fr_line
,
7674 _("long jump required"));
7676 switch (fragP
->fr_subtype
)
7678 case ENCODE_RELAX_STATE (UNCOND_JUMP
, BIG
):
7679 extension
= 4; /* 1 opcode + 4 displacement */
7681 where_to_put_displacement
= &opcode
[1];
7684 case ENCODE_RELAX_STATE (UNCOND_JUMP
, BIG16
):
7685 extension
= 2; /* 1 opcode + 2 displacement */
7687 where_to_put_displacement
= &opcode
[1];
7690 case ENCODE_RELAX_STATE (COND_JUMP
, BIG
):
7691 case ENCODE_RELAX_STATE (COND_JUMP86
, BIG
):
7692 extension
= 5; /* 2 opcode + 4 displacement */
7693 opcode
[1] = opcode
[0] + 0x10;
7694 opcode
[0] = TWO_BYTE_OPCODE_ESCAPE
;
7695 where_to_put_displacement
= &opcode
[2];
7698 case ENCODE_RELAX_STATE (COND_JUMP
, BIG16
):
7699 extension
= 3; /* 2 opcode + 2 displacement */
7700 opcode
[1] = opcode
[0] + 0x10;
7701 opcode
[0] = TWO_BYTE_OPCODE_ESCAPE
;
7702 where_to_put_displacement
= &opcode
[2];
7705 case ENCODE_RELAX_STATE (COND_JUMP86
, BIG16
):
7710 where_to_put_displacement
= &opcode
[3];
7714 BAD_CASE (fragP
->fr_subtype
);
7719 /* If size if less then four we are sure that the operand fits,
7720 but if it's 4, then it could be that the displacement is larger
7722 if (DISP_SIZE_FROM_RELAX_STATE (fragP
->fr_subtype
) == 4
7724 && ((addressT
) (displacement_from_opcode_start
- extension
7725 + ((addressT
) 1 << 31))
7726 > (((addressT
) 2 << 31) - 1)))
7728 as_bad_where (fragP
->fr_file
, fragP
->fr_line
,
7729 _("jump target out of range"));
7730 /* Make us emit 0. */
7731 displacement_from_opcode_start
= extension
;
7733 /* Now put displacement after opcode. */
7734 md_number_to_chars ((char *) where_to_put_displacement
,
7735 (valueT
) (displacement_from_opcode_start
- extension
),
7736 DISP_SIZE_FROM_RELAX_STATE (fragP
->fr_subtype
));
7737 fragP
->fr_fix
+= extension
;
7740 /* Apply a fixup (fixS) to segment data, once it has been determined
7741 by our caller that we have all the info we need to fix it up.
7743 On the 386, immediates, displacements, and data pointers are all in
7744 the same (little-endian) format, so we don't need to care about which
7748 md_apply_fix (fixP
, valP
, seg
)
7749 /* The fix we're to put in. */
7751 /* Pointer to the value of the bits. */
7753 /* Segment fix is from. */
7754 segT seg ATTRIBUTE_UNUSED
;
7756 char *p
= fixP
->fx_where
+ fixP
->fx_frag
->fr_literal
;
7757 valueT value
= *valP
;
7759 #if !defined (TE_Mach)
7762 switch (fixP
->fx_r_type
)
7768 fixP
->fx_r_type
= BFD_RELOC_64_PCREL
;
7771 case BFD_RELOC_X86_64_32S
:
7772 fixP
->fx_r_type
= BFD_RELOC_32_PCREL
;
7775 fixP
->fx_r_type
= BFD_RELOC_16_PCREL
;
7778 fixP
->fx_r_type
= BFD_RELOC_8_PCREL
;
7783 if (fixP
->fx_addsy
!= NULL
7784 && (fixP
->fx_r_type
== BFD_RELOC_32_PCREL
7785 || fixP
->fx_r_type
== BFD_RELOC_64_PCREL
7786 || fixP
->fx_r_type
== BFD_RELOC_16_PCREL
7787 || fixP
->fx_r_type
== BFD_RELOC_8_PCREL
)
7788 && !use_rela_relocations
)
7790 /* This is a hack. There should be a better way to handle this.
7791 This covers for the fact that bfd_install_relocation will
7792 subtract the current location (for partial_inplace, PC relative
7793 relocations); see more below. */
7797 || OUTPUT_FLAVOR
== bfd_target_coff_flavour
7800 value
+= fixP
->fx_where
+ fixP
->fx_frag
->fr_address
;
7802 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
7805 segT sym_seg
= S_GET_SEGMENT (fixP
->fx_addsy
);
7808 || (symbol_section_p (fixP
->fx_addsy
)
7809 && sym_seg
!= absolute_section
))
7810 && !generic_force_reloc (fixP
))
7812 /* Yes, we add the values in twice. This is because
7813 bfd_install_relocation subtracts them out again. I think
7814 bfd_install_relocation is broken, but I don't dare change
7816 value
+= fixP
->fx_where
+ fixP
->fx_frag
->fr_address
;
7820 #if defined (OBJ_COFF) && defined (TE_PE)
7821 /* For some reason, the PE format does not store a
7822 section address offset for a PC relative symbol. */
7823 if (S_GET_SEGMENT (fixP
->fx_addsy
) != seg
7824 || S_IS_WEAK (fixP
->fx_addsy
))
7825 value
+= md_pcrel_from (fixP
);
7828 #if defined (OBJ_COFF) && defined (TE_PE)
7829 if (fixP
->fx_addsy
!= NULL
&& S_IS_WEAK (fixP
->fx_addsy
))
7831 value
-= S_GET_VALUE (fixP
->fx_addsy
);
7835 /* Fix a few things - the dynamic linker expects certain values here,
7836 and we must not disappoint it. */
7837 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
7838 if (IS_ELF
&& fixP
->fx_addsy
)
7839 switch (fixP
->fx_r_type
)
7841 case BFD_RELOC_386_PLT32
:
7842 case BFD_RELOC_X86_64_PLT32
:
7843 /* Make the jump instruction point to the address of the operand. At
7844 runtime we merely add the offset to the actual PLT entry. */
7848 case BFD_RELOC_386_TLS_GD
:
7849 case BFD_RELOC_386_TLS_LDM
:
7850 case BFD_RELOC_386_TLS_IE_32
:
7851 case BFD_RELOC_386_TLS_IE
:
7852 case BFD_RELOC_386_TLS_GOTIE
:
7853 case BFD_RELOC_386_TLS_GOTDESC
:
7854 case BFD_RELOC_X86_64_TLSGD
:
7855 case BFD_RELOC_X86_64_TLSLD
:
7856 case BFD_RELOC_X86_64_GOTTPOFF
:
7857 case BFD_RELOC_X86_64_GOTPC32_TLSDESC
:
7858 value
= 0; /* Fully resolved at runtime. No addend. */
7860 case BFD_RELOC_386_TLS_LE
:
7861 case BFD_RELOC_386_TLS_LDO_32
:
7862 case BFD_RELOC_386_TLS_LE_32
:
7863 case BFD_RELOC_X86_64_DTPOFF32
:
7864 case BFD_RELOC_X86_64_DTPOFF64
:
7865 case BFD_RELOC_X86_64_TPOFF32
:
7866 case BFD_RELOC_X86_64_TPOFF64
:
7867 S_SET_THREAD_LOCAL (fixP
->fx_addsy
);
7870 case BFD_RELOC_386_TLS_DESC_CALL
:
7871 case BFD_RELOC_X86_64_TLSDESC_CALL
:
7872 value
= 0; /* Fully resolved at runtime. No addend. */
7873 S_SET_THREAD_LOCAL (fixP
->fx_addsy
);
7877 case BFD_RELOC_386_GOT32
:
7878 case BFD_RELOC_X86_64_GOT32
:
7879 value
= 0; /* Fully resolved at runtime. No addend. */
7882 case BFD_RELOC_VTABLE_INHERIT
:
7883 case BFD_RELOC_VTABLE_ENTRY
:
7890 #endif /* defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) */
7892 #endif /* !defined (TE_Mach) */
7894 /* Are we finished with this relocation now? */
7895 if (fixP
->fx_addsy
== NULL
)
7897 #if defined (OBJ_COFF) && defined (TE_PE)
7898 else if (fixP
->fx_addsy
!= NULL
&& S_IS_WEAK (fixP
->fx_addsy
))
7901 /* Remember value for tc_gen_reloc. */
7902 fixP
->fx_addnumber
= value
;
7903 /* Clear out the frag for now. */
7907 else if (use_rela_relocations
)
7909 fixP
->fx_no_overflow
= 1;
7910 /* Remember value for tc_gen_reloc. */
7911 fixP
->fx_addnumber
= value
;
7915 md_number_to_chars (p
, value
, fixP
->fx_size
);
7919 md_atof (int type
, char *litP
, int *sizeP
)
7921 /* This outputs the LITTLENUMs in REVERSE order;
7922 in accord with the bigendian 386. */
7923 return ieee_md_atof (type
, litP
, sizeP
, FALSE
);
7926 static char output_invalid_buf
[sizeof (unsigned char) * 2 + 6];
7929 output_invalid (int c
)
7932 snprintf (output_invalid_buf
, sizeof (output_invalid_buf
),
7935 snprintf (output_invalid_buf
, sizeof (output_invalid_buf
),
7936 "(0x%x)", (unsigned char) c
);
7937 return output_invalid_buf
;
7940 /* REG_STRING starts *before* REGISTER_PREFIX. */
7942 static const reg_entry
*
7943 parse_real_register (char *reg_string
, char **end_op
)
7945 char *s
= reg_string
;
7947 char reg_name_given
[MAX_REG_NAME_SIZE
+ 1];
7950 /* Skip possible REGISTER_PREFIX and possible whitespace. */
7951 if (*s
== REGISTER_PREFIX
)
7954 if (is_space_char (*s
))
7958 while ((*p
++ = register_chars
[(unsigned char) *s
]) != '\0')
7960 if (p
>= reg_name_given
+ MAX_REG_NAME_SIZE
)
7961 return (const reg_entry
*) NULL
;
7965 /* For naked regs, make sure that we are not dealing with an identifier.
7966 This prevents confusing an identifier like `eax_var' with register
7968 if (allow_naked_reg
&& identifier_chars
[(unsigned char) *s
])
7969 return (const reg_entry
*) NULL
;
7973 r
= (const reg_entry
*) hash_find (reg_hash
, reg_name_given
);
7975 /* Handle floating point regs, allowing spaces in the (i) part. */
7976 if (r
== i386_regtab
/* %st is first entry of table */)
7978 if (is_space_char (*s
))
7983 if (is_space_char (*s
))
7985 if (*s
>= '0' && *s
<= '7')
7989 if (is_space_char (*s
))
7994 r
= (const reg_entry
*) hash_find (reg_hash
, "st(0)");
7999 /* We have "%st(" then garbage. */
8000 return (const reg_entry
*) NULL
;
8004 if (r
== NULL
|| allow_pseudo_reg
)
8007 if (operand_type_all_zero (&r
->reg_type
))
8008 return (const reg_entry
*) NULL
;
8010 if ((r
->reg_type
.bitfield
.reg32
8011 || r
->reg_type
.bitfield
.sreg3
8012 || r
->reg_type
.bitfield
.control
8013 || r
->reg_type
.bitfield
.debug
8014 || r
->reg_type
.bitfield
.test
)
8015 && !cpu_arch_flags
.bitfield
.cpui386
)
8016 return (const reg_entry
*) NULL
;
8018 if (r
->reg_type
.bitfield
.floatreg
8019 && !cpu_arch_flags
.bitfield
.cpu8087
8020 && !cpu_arch_flags
.bitfield
.cpu287
8021 && !cpu_arch_flags
.bitfield
.cpu387
)
8022 return (const reg_entry
*) NULL
;
8024 if (r
->reg_type
.bitfield
.regmmx
&& !cpu_arch_flags
.bitfield
.cpummx
)
8025 return (const reg_entry
*) NULL
;
8027 if (r
->reg_type
.bitfield
.regxmm
&& !cpu_arch_flags
.bitfield
.cpusse
)
8028 return (const reg_entry
*) NULL
;
8030 if (r
->reg_type
.bitfield
.regymm
&& !cpu_arch_flags
.bitfield
.cpuavx
)
8031 return (const reg_entry
*) NULL
;
8033 /* Don't allow fake index register unless allow_index_reg isn't 0. */
8034 if (!allow_index_reg
8035 && (r
->reg_num
== RegEiz
|| r
->reg_num
== RegRiz
))
8036 return (const reg_entry
*) NULL
;
8038 if (((r
->reg_flags
& (RegRex64
| RegRex
))
8039 || r
->reg_type
.bitfield
.reg64
)
8040 && (!cpu_arch_flags
.bitfield
.cpulm
8041 || !operand_type_equal (&r
->reg_type
, &control
))
8042 && flag_code
!= CODE_64BIT
)
8043 return (const reg_entry
*) NULL
;
8045 if (r
->reg_type
.bitfield
.sreg3
&& r
->reg_num
== RegFlat
&& !intel_syntax
)
8046 return (const reg_entry
*) NULL
;
8051 /* REG_STRING starts *before* REGISTER_PREFIX. */
8053 static const reg_entry
*
8054 parse_register (char *reg_string
, char **end_op
)
8058 if (*reg_string
== REGISTER_PREFIX
|| allow_naked_reg
)
8059 r
= parse_real_register (reg_string
, end_op
);
8064 char *save
= input_line_pointer
;
8068 input_line_pointer
= reg_string
;
8069 c
= get_symbol_end ();
8070 symbolP
= symbol_find (reg_string
);
8071 if (symbolP
&& S_GET_SEGMENT (symbolP
) == reg_section
)
8073 const expressionS
*e
= symbol_get_value_expression (symbolP
);
8075 know (e
->X_op
== O_register
);
8076 know (e
->X_add_number
>= 0
8077 && (valueT
) e
->X_add_number
< i386_regtab_size
);
8078 r
= i386_regtab
+ e
->X_add_number
;
8079 *end_op
= input_line_pointer
;
8081 *input_line_pointer
= c
;
8082 input_line_pointer
= save
;
8088 i386_parse_name (char *name
, expressionS
*e
, char *nextcharP
)
8091 char *end
= input_line_pointer
;
8094 r
= parse_register (name
, &input_line_pointer
);
8095 if (r
&& end
<= input_line_pointer
)
8097 *nextcharP
= *input_line_pointer
;
8098 *input_line_pointer
= 0;
8099 e
->X_op
= O_register
;
8100 e
->X_add_number
= r
- i386_regtab
;
8103 input_line_pointer
= end
;
8105 return intel_syntax
? i386_intel_parse_name (name
, e
) : 0;
8109 md_operand (expressionS
*e
)
8114 switch (*input_line_pointer
)
8116 case REGISTER_PREFIX
:
8117 r
= parse_real_register (input_line_pointer
, &end
);
8120 e
->X_op
= O_register
;
8121 e
->X_add_number
= r
- i386_regtab
;
8122 input_line_pointer
= end
;
8127 gas_assert (intel_syntax
);
8128 end
= input_line_pointer
++;
8130 if (*input_line_pointer
== ']')
8132 ++input_line_pointer
;
8133 e
->X_op_symbol
= make_expr_symbol (e
);
8134 e
->X_add_symbol
= NULL
;
8135 e
->X_add_number
= 0;
8141 input_line_pointer
= end
;
8148 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
8149 const char *md_shortopts
= "kVQ:sqn";
8151 const char *md_shortopts
= "qn";
8154 #define OPTION_32 (OPTION_MD_BASE + 0)
8155 #define OPTION_64 (OPTION_MD_BASE + 1)
8156 #define OPTION_DIVIDE (OPTION_MD_BASE + 2)
8157 #define OPTION_MARCH (OPTION_MD_BASE + 3)
8158 #define OPTION_MTUNE (OPTION_MD_BASE + 4)
8159 #define OPTION_MMNEMONIC (OPTION_MD_BASE + 5)
8160 #define OPTION_MSYNTAX (OPTION_MD_BASE + 6)
8161 #define OPTION_MINDEX_REG (OPTION_MD_BASE + 7)
8162 #define OPTION_MNAKED_REG (OPTION_MD_BASE + 8)
8163 #define OPTION_MOLD_GCC (OPTION_MD_BASE + 9)
8164 #define OPTION_MSSE2AVX (OPTION_MD_BASE + 10)
8165 #define OPTION_MSSE_CHECK (OPTION_MD_BASE + 11)
8166 #define OPTION_MAVXSCALAR (OPTION_MD_BASE + 12)
8167 #define OPTION_X32 (OPTION_MD_BASE + 13)
8169 struct option md_longopts
[] =
8171 {"32", no_argument
, NULL
, OPTION_32
},
8172 #if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
8173 || defined (TE_PE) || defined (TE_PEP))
8174 {"64", no_argument
, NULL
, OPTION_64
},
8176 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
8177 {"x32", no_argument
, NULL
, OPTION_X32
},
8179 {"divide", no_argument
, NULL
, OPTION_DIVIDE
},
8180 {"march", required_argument
, NULL
, OPTION_MARCH
},
8181 {"mtune", required_argument
, NULL
, OPTION_MTUNE
},
8182 {"mmnemonic", required_argument
, NULL
, OPTION_MMNEMONIC
},
8183 {"msyntax", required_argument
, NULL
, OPTION_MSYNTAX
},
8184 {"mindex-reg", no_argument
, NULL
, OPTION_MINDEX_REG
},
8185 {"mnaked-reg", no_argument
, NULL
, OPTION_MNAKED_REG
},
8186 {"mold-gcc", no_argument
, NULL
, OPTION_MOLD_GCC
},
8187 {"msse2avx", no_argument
, NULL
, OPTION_MSSE2AVX
},
8188 {"msse-check", required_argument
, NULL
, OPTION_MSSE_CHECK
},
8189 {"mavxscalar", required_argument
, NULL
, OPTION_MAVXSCALAR
},
8190 {NULL
, no_argument
, NULL
, 0}
8192 size_t md_longopts_size
= sizeof (md_longopts
);
8195 md_parse_option (int c
, char *arg
)
8203 optimize_align_code
= 0;
8210 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
8211 /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section
8212 should be emitted or not. FIXME: Not implemented. */
8216 /* -V: SVR4 argument to print version ID. */
8218 print_version_id ();
8221 /* -k: Ignore for FreeBSD compatibility. */
8226 /* -s: On i386 Solaris, this tells the native assembler to use
8227 .stab instead of .stab.excl. We always use .stab anyhow. */
8230 #if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
8231 || defined (TE_PE) || defined (TE_PEP))
8234 const char **list
, **l
;
8236 list
= bfd_target_list ();
8237 for (l
= list
; *l
!= NULL
; l
++)
8238 if (CONST_STRNEQ (*l
, "elf64-x86-64")
8239 || strcmp (*l
, "coff-x86-64") == 0
8240 || strcmp (*l
, "pe-x86-64") == 0
8241 || strcmp (*l
, "pei-x86-64") == 0)
8243 default_arch
= "x86_64";
8247 as_fatal (_("No compiled in support for x86_64"));
8253 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
8257 const char **list
, **l
;
8259 list
= bfd_target_list ();
8260 for (l
= list
; *l
!= NULL
; l
++)
8261 if (CONST_STRNEQ (*l
, "elf32-x86-64"))
8263 default_arch
= "x86_64:32";
8267 as_fatal (_("No compiled in support for 32bit x86_64"));
8271 as_fatal (_("32bit x86_64 is only supported for ELF"));
8276 default_arch
= "i386";
8280 #ifdef SVR4_COMMENT_CHARS
8285 n
= (char *) xmalloc (strlen (i386_comment_chars
) + 1);
8287 for (s
= i386_comment_chars
; *s
!= '\0'; s
++)
8291 i386_comment_chars
= n
;
8297 arch
= xstrdup (arg
);
8301 as_fatal (_("Invalid -march= option: `%s'"), arg
);
8302 next
= strchr (arch
, '+');
8305 for (j
= 0; j
< ARRAY_SIZE (cpu_arch
); j
++)
8307 if (strcmp (arch
, cpu_arch
[j
].name
) == 0)
8310 if (! cpu_arch
[j
].flags
.bitfield
.cpui386
)
8313 cpu_arch_name
= cpu_arch
[j
].name
;
8314 cpu_sub_arch_name
= NULL
;
8315 cpu_arch_flags
= cpu_arch
[j
].flags
;
8316 cpu_arch_isa
= cpu_arch
[j
].type
;
8317 cpu_arch_isa_flags
= cpu_arch
[j
].flags
;
8318 if (!cpu_arch_tune_set
)
8320 cpu_arch_tune
= cpu_arch_isa
;
8321 cpu_arch_tune_flags
= cpu_arch_isa_flags
;
8325 else if (*cpu_arch
[j
].name
== '.'
8326 && strcmp (arch
, cpu_arch
[j
].name
+ 1) == 0)
8328 /* ISA entension. */
8329 i386_cpu_flags flags
;
8331 if (!cpu_arch
[j
].negated
)
8332 flags
= cpu_flags_or (cpu_arch_flags
,
8335 flags
= cpu_flags_and_not (cpu_arch_flags
,
8337 if (!cpu_flags_equal (&flags
, &cpu_arch_flags
))
8339 if (cpu_sub_arch_name
)
8341 char *name
= cpu_sub_arch_name
;
8342 cpu_sub_arch_name
= concat (name
,
8344 (const char *) NULL
);
8348 cpu_sub_arch_name
= xstrdup (cpu_arch
[j
].name
);
8349 cpu_arch_flags
= flags
;
8350 cpu_arch_isa_flags
= flags
;
8356 if (j
>= ARRAY_SIZE (cpu_arch
))
8357 as_fatal (_("Invalid -march= option: `%s'"), arg
);
8361 while (next
!= NULL
);
8366 as_fatal (_("Invalid -mtune= option: `%s'"), arg
);
8367 for (j
= 0; j
< ARRAY_SIZE (cpu_arch
); j
++)
8369 if (strcmp (arg
, cpu_arch
[j
].name
) == 0)
8371 cpu_arch_tune_set
= 1;
8372 cpu_arch_tune
= cpu_arch
[j
].type
;
8373 cpu_arch_tune_flags
= cpu_arch
[j
].flags
;
8377 if (j
>= ARRAY_SIZE (cpu_arch
))
8378 as_fatal (_("Invalid -mtune= option: `%s'"), arg
);
8381 case OPTION_MMNEMONIC
:
8382 if (strcasecmp (arg
, "att") == 0)
8384 else if (strcasecmp (arg
, "intel") == 0)
8387 as_fatal (_("Invalid -mmnemonic= option: `%s'"), arg
);
8390 case OPTION_MSYNTAX
:
8391 if (strcasecmp (arg
, "att") == 0)
8393 else if (strcasecmp (arg
, "intel") == 0)
8396 as_fatal (_("Invalid -msyntax= option: `%s'"), arg
);
8399 case OPTION_MINDEX_REG
:
8400 allow_index_reg
= 1;
8403 case OPTION_MNAKED_REG
:
8404 allow_naked_reg
= 1;
8407 case OPTION_MOLD_GCC
:
8411 case OPTION_MSSE2AVX
:
8415 case OPTION_MSSE_CHECK
:
8416 if (strcasecmp (arg
, "error") == 0)
8417 sse_check
= sse_check_error
;
8418 else if (strcasecmp (arg
, "warning") == 0)
8419 sse_check
= sse_check_warning
;
8420 else if (strcasecmp (arg
, "none") == 0)
8421 sse_check
= sse_check_none
;
8423 as_fatal (_("Invalid -msse-check= option: `%s'"), arg
);
8426 case OPTION_MAVXSCALAR
:
8427 if (strcasecmp (arg
, "128") == 0)
8429 else if (strcasecmp (arg
, "256") == 0)
8432 as_fatal (_("Invalid -mavxscalar= option: `%s'"), arg
);
8441 #define MESSAGE_TEMPLATE \
8445 show_arch (FILE *stream
, int ext
, int check
)
8447 static char message
[] = MESSAGE_TEMPLATE
;
8448 char *start
= message
+ 27;
8450 int size
= sizeof (MESSAGE_TEMPLATE
);
8457 left
= size
- (start
- message
);
8458 for (j
= 0; j
< ARRAY_SIZE (cpu_arch
); j
++)
8460 /* Should it be skipped? */
8461 if (cpu_arch
[j
].skip
)
8464 name
= cpu_arch
[j
].name
;
8465 len
= cpu_arch
[j
].len
;
8468 /* It is an extension. Skip if we aren't asked to show it. */
8479 /* It is an processor. Skip if we show only extension. */
8482 else if (check
&& ! cpu_arch
[j
].flags
.bitfield
.cpui386
)
8484 /* It is an impossible processor - skip. */
8488 /* Reserve 2 spaces for ", " or ",\0" */
8491 /* Check if there is any room. */
8499 p
= mempcpy (p
, name
, len
);
8503 /* Output the current message now and start a new one. */
8506 fprintf (stream
, "%s\n", message
);
8508 left
= size
- (start
- message
) - len
- 2;
8510 gas_assert (left
>= 0);
8512 p
= mempcpy (p
, name
, len
);
8517 fprintf (stream
, "%s\n", message
);
8521 md_show_usage (FILE *stream
)
8523 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
8524 fprintf (stream
, _("\
8526 -V print assembler version number\n\
8529 fprintf (stream
, _("\
8530 -n Do not optimize code alignment\n\
8531 -q quieten some warnings\n"));
8532 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
8533 fprintf (stream
, _("\
8536 #if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
8537 || defined (TE_PE) || defined (TE_PEP))
8538 fprintf (stream
, _("\
8539 --32/--64/--x32 generate 32bit/64bit/x32 code\n"));
8541 #ifdef SVR4_COMMENT_CHARS
8542 fprintf (stream
, _("\
8543 --divide do not treat `/' as a comment character\n"));
8545 fprintf (stream
, _("\
8546 --divide ignored\n"));
8548 fprintf (stream
, _("\
8549 -march=CPU[,+EXTENSION...]\n\
8550 generate code for CPU and EXTENSION, CPU is one of:\n"));
8551 show_arch (stream
, 0, 1);
8552 fprintf (stream
, _("\
8553 EXTENSION is combination of:\n"));
8554 show_arch (stream
, 1, 0);
8555 fprintf (stream
, _("\
8556 -mtune=CPU optimize for CPU, CPU is one of:\n"));
8557 show_arch (stream
, 0, 0);
8558 fprintf (stream
, _("\
8559 -msse2avx encode SSE instructions with VEX prefix\n"));
8560 fprintf (stream
, _("\
8561 -msse-check=[none|error|warning]\n\
8562 check SSE instructions\n"));
8563 fprintf (stream
, _("\
8564 -mavxscalar=[128|256] encode scalar AVX instructions with specific vector\n\
8566 fprintf (stream
, _("\
8567 -mmnemonic=[att|intel] use AT&T/Intel mnemonic\n"));
8568 fprintf (stream
, _("\
8569 -msyntax=[att|intel] use AT&T/Intel syntax\n"));
8570 fprintf (stream
, _("\
8571 -mindex-reg support pseudo index registers\n"));
8572 fprintf (stream
, _("\
8573 -mnaked-reg don't require `%%' prefix for registers\n"));
8574 fprintf (stream
, _("\
8575 -mold-gcc support old (<= 2.8.1) versions of gcc\n"));
8578 #if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
8579 || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
8580 || defined (TE_PE) || defined (TE_PEP) || defined (OBJ_MACH_O))
8582 /* Pick the target format to use. */
8585 i386_target_format (void)
8587 if (!strncmp (default_arch
, "x86_64", 6))
8589 update_code_flag (CODE_64BIT
, 1);
8590 if (default_arch
[6] == '\0')
8591 x86_elf_abi
= X86_64_ABI
;
8593 x86_elf_abi
= X86_64_X32_ABI
;
8595 else if (!strcmp (default_arch
, "i386"))
8596 update_code_flag (CODE_32BIT
, 1);
8598 as_fatal (_("Unknown architecture"));
8600 if (cpu_flags_all_zero (&cpu_arch_isa_flags
))
8601 cpu_arch_isa_flags
= cpu_arch
[flag_code
== CODE_64BIT
].flags
;
8602 if (cpu_flags_all_zero (&cpu_arch_tune_flags
))
8603 cpu_arch_tune_flags
= cpu_arch
[flag_code
== CODE_64BIT
].flags
;
8605 switch (OUTPUT_FLAVOR
)
8607 #if defined (OBJ_MAYBE_AOUT) || defined (OBJ_AOUT)
8608 case bfd_target_aout_flavour
:
8609 return AOUT_TARGET_FORMAT
;
8611 #if defined (OBJ_MAYBE_COFF) || defined (OBJ_COFF)
8612 # if defined (TE_PE) || defined (TE_PEP)
8613 case bfd_target_coff_flavour
:
8614 return flag_code
== CODE_64BIT
? "pe-x86-64" : "pe-i386";
8615 # elif defined (TE_GO32)
8616 case bfd_target_coff_flavour
:
8619 case bfd_target_coff_flavour
:
8623 #if defined (OBJ_MAYBE_ELF) || defined (OBJ_ELF)
8624 case bfd_target_elf_flavour
:
8628 switch (x86_elf_abi
)
8631 format
= ELF_TARGET_FORMAT
;
8634 use_rela_relocations
= 1;
8636 format
= ELF_TARGET_FORMAT64
;
8638 case X86_64_X32_ABI
:
8639 use_rela_relocations
= 1;
8641 disallow_64bit_reloc
= 1;
8642 format
= ELF_TARGET_FORMAT32
;
8645 if (cpu_arch_isa
== PROCESSOR_L1OM
)
8647 if (x86_elf_abi
!= X86_64_ABI
)
8648 as_fatal (_("Intel L1OM is 64bit only"));
8649 return ELF_TARGET_L1OM_FORMAT
;
8655 #if defined (OBJ_MACH_O)
8656 case bfd_target_mach_o_flavour
:
8657 return flag_code
== CODE_64BIT
? "mach-o-x86-64" : "mach-o-i386";
8665 #endif /* OBJ_MAYBE_ more than one */
8667 #if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
8669 i386_elf_emit_arch_note (void)
8671 if (IS_ELF
&& cpu_arch_name
!= NULL
)
8674 asection
*seg
= now_seg
;
8675 subsegT subseg
= now_subseg
;
8676 Elf_Internal_Note i_note
;
8677 Elf_External_Note e_note
;
8678 asection
*note_secp
;
8681 /* Create the .note section. */
8682 note_secp
= subseg_new (".note", 0);
8683 bfd_set_section_flags (stdoutput
,
8685 SEC_HAS_CONTENTS
| SEC_READONLY
);
8687 /* Process the arch string. */
8688 len
= strlen (cpu_arch_name
);
8690 i_note
.namesz
= len
+ 1;
8692 i_note
.type
= NT_ARCH
;
8693 p
= frag_more (sizeof (e_note
.namesz
));
8694 md_number_to_chars (p
, (valueT
) i_note
.namesz
, sizeof (e_note
.namesz
));
8695 p
= frag_more (sizeof (e_note
.descsz
));
8696 md_number_to_chars (p
, (valueT
) i_note
.descsz
, sizeof (e_note
.descsz
));
8697 p
= frag_more (sizeof (e_note
.type
));
8698 md_number_to_chars (p
, (valueT
) i_note
.type
, sizeof (e_note
.type
));
8699 p
= frag_more (len
+ 1);
8700 strcpy (p
, cpu_arch_name
);
8702 frag_align (2, 0, 0);
8704 subseg_set (seg
, subseg
);
8710 md_undefined_symbol (name
)
8713 if (name
[0] == GLOBAL_OFFSET_TABLE_NAME
[0]
8714 && name
[1] == GLOBAL_OFFSET_TABLE_NAME
[1]
8715 && name
[2] == GLOBAL_OFFSET_TABLE_NAME
[2]
8716 && strcmp (name
, GLOBAL_OFFSET_TABLE_NAME
) == 0)
8720 if (symbol_find (name
))
8721 as_bad (_("GOT already in symbol table"));
8722 GOT_symbol
= symbol_new (name
, undefined_section
,
8723 (valueT
) 0, &zero_address_frag
);
8730 /* Round up a section size to the appropriate boundary. */
8733 md_section_align (segment
, size
)
8734 segT segment ATTRIBUTE_UNUSED
;
8737 #if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
8738 if (OUTPUT_FLAVOR
== bfd_target_aout_flavour
)
8740 /* For a.out, force the section size to be aligned. If we don't do
8741 this, BFD will align it for us, but it will not write out the
8742 final bytes of the section. This may be a bug in BFD, but it is
8743 easier to fix it here since that is how the other a.out targets
8747 align
= bfd_get_section_alignment (stdoutput
, segment
);
8748 size
= ((size
+ (1 << align
) - 1) & ((valueT
) -1 << align
));
8755 /* On the i386, PC-relative offsets are relative to the start of the
8756 next instruction. That is, the address of the offset, plus its
8757 size, since the offset is always the last part of the insn. */
8760 md_pcrel_from (fixS
*fixP
)
8762 return fixP
->fx_size
+ fixP
->fx_where
+ fixP
->fx_frag
->fr_address
;
8768 s_bss (int ignore ATTRIBUTE_UNUSED
)
8772 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
8774 obj_elf_section_change_hook ();
8776 temp
= get_absolute_expression ();
8777 subseg_set (bss_section
, (subsegT
) temp
);
8778 demand_empty_rest_of_line ();
8784 i386_validate_fix (fixS
*fixp
)
8786 if (fixp
->fx_subsy
&& fixp
->fx_subsy
== GOT_symbol
)
8788 if (fixp
->fx_r_type
== BFD_RELOC_32_PCREL
)
8792 fixp
->fx_r_type
= BFD_RELOC_X86_64_GOTPCREL
;
8797 fixp
->fx_r_type
= BFD_RELOC_386_GOTOFF
;
8799 fixp
->fx_r_type
= BFD_RELOC_X86_64_GOTOFF64
;
8806 tc_gen_reloc (section
, fixp
)
8807 asection
*section ATTRIBUTE_UNUSED
;
8811 bfd_reloc_code_real_type code
;
8813 switch (fixp
->fx_r_type
)
8815 case BFD_RELOC_X86_64_PLT32
:
8816 case BFD_RELOC_X86_64_GOT32
:
8817 case BFD_RELOC_X86_64_GOTPCREL
:
8818 case BFD_RELOC_386_PLT32
:
8819 case BFD_RELOC_386_GOT32
:
8820 case BFD_RELOC_386_GOTOFF
:
8821 case BFD_RELOC_386_GOTPC
:
8822 case BFD_RELOC_386_TLS_GD
:
8823 case BFD_RELOC_386_TLS_LDM
:
8824 case BFD_RELOC_386_TLS_LDO_32
:
8825 case BFD_RELOC_386_TLS_IE_32
:
8826 case BFD_RELOC_386_TLS_IE
:
8827 case BFD_RELOC_386_TLS_GOTIE
:
8828 case BFD_RELOC_386_TLS_LE_32
:
8829 case BFD_RELOC_386_TLS_LE
:
8830 case BFD_RELOC_386_TLS_GOTDESC
:
8831 case BFD_RELOC_386_TLS_DESC_CALL
:
8832 case BFD_RELOC_X86_64_TLSGD
:
8833 case BFD_RELOC_X86_64_TLSLD
:
8834 case BFD_RELOC_X86_64_DTPOFF32
:
8835 case BFD_RELOC_X86_64_DTPOFF64
:
8836 case BFD_RELOC_X86_64_GOTTPOFF
:
8837 case BFD_RELOC_X86_64_TPOFF32
:
8838 case BFD_RELOC_X86_64_TPOFF64
:
8839 case BFD_RELOC_X86_64_GOTOFF64
:
8840 case BFD_RELOC_X86_64_GOTPC32
:
8841 case BFD_RELOC_X86_64_GOT64
:
8842 case BFD_RELOC_X86_64_GOTPCREL64
:
8843 case BFD_RELOC_X86_64_GOTPC64
:
8844 case BFD_RELOC_X86_64_GOTPLT64
:
8845 case BFD_RELOC_X86_64_PLTOFF64
:
8846 case BFD_RELOC_X86_64_GOTPC32_TLSDESC
:
8847 case BFD_RELOC_X86_64_TLSDESC_CALL
:
8849 case BFD_RELOC_VTABLE_ENTRY
:
8850 case BFD_RELOC_VTABLE_INHERIT
:
8852 case BFD_RELOC_32_SECREL
:
8854 code
= fixp
->fx_r_type
;
8856 case BFD_RELOC_X86_64_32S
:
8857 if (!fixp
->fx_pcrel
)
8859 /* Don't turn BFD_RELOC_X86_64_32S into BFD_RELOC_32. */
8860 code
= fixp
->fx_r_type
;
8866 switch (fixp
->fx_size
)
8869 as_bad_where (fixp
->fx_file
, fixp
->fx_line
,
8870 _("can not do %d byte pc-relative relocation"),
8872 code
= BFD_RELOC_32_PCREL
;
8874 case 1: code
= BFD_RELOC_8_PCREL
; break;
8875 case 2: code
= BFD_RELOC_16_PCREL
; break;
8876 case 4: code
= BFD_RELOC_32_PCREL
; break;
8878 case 8: code
= BFD_RELOC_64_PCREL
; break;
8884 switch (fixp
->fx_size
)
8887 as_bad_where (fixp
->fx_file
, fixp
->fx_line
,
8888 _("can not do %d byte relocation"),
8890 code
= BFD_RELOC_32
;
8892 case 1: code
= BFD_RELOC_8
; break;
8893 case 2: code
= BFD_RELOC_16
; break;
8894 case 4: code
= BFD_RELOC_32
; break;
8896 case 8: code
= BFD_RELOC_64
; break;
8903 if ((code
== BFD_RELOC_32
8904 || code
== BFD_RELOC_32_PCREL
8905 || code
== BFD_RELOC_X86_64_32S
)
8907 && fixp
->fx_addsy
== GOT_symbol
)
8910 code
= BFD_RELOC_386_GOTPC
;
8912 code
= BFD_RELOC_X86_64_GOTPC32
;
8914 if ((code
== BFD_RELOC_64
|| code
== BFD_RELOC_64_PCREL
)
8916 && fixp
->fx_addsy
== GOT_symbol
)
8918 code
= BFD_RELOC_X86_64_GOTPC64
;
8921 rel
= (arelent
*) xmalloc (sizeof (arelent
));
8922 rel
->sym_ptr_ptr
= (asymbol
**) xmalloc (sizeof (asymbol
*));
8923 *rel
->sym_ptr_ptr
= symbol_get_bfdsym (fixp
->fx_addsy
);
8925 rel
->address
= fixp
->fx_frag
->fr_address
+ fixp
->fx_where
;
8927 if (!use_rela_relocations
)
8929 /* HACK: Since i386 ELF uses Rel instead of Rela, encode the
8930 vtable entry to be used in the relocation's section offset. */
8931 if (fixp
->fx_r_type
== BFD_RELOC_VTABLE_ENTRY
)
8932 rel
->address
= fixp
->fx_offset
;
8933 #if defined (OBJ_COFF) && defined (TE_PE)
8934 else if (fixp
->fx_addsy
&& S_IS_WEAK (fixp
->fx_addsy
))
8935 rel
->addend
= fixp
->fx_addnumber
- (S_GET_VALUE (fixp
->fx_addsy
) * 2);
8940 /* Use the rela in 64bit mode. */
8943 if (disallow_64bit_reloc
)
8947 case BFD_RELOC_X86_64_DTPOFF64
:
8948 case BFD_RELOC_X86_64_TPOFF64
:
8949 case BFD_RELOC_64_PCREL
:
8950 case BFD_RELOC_X86_64_GOTOFF64
:
8951 case BFD_RELOC_X86_64_GOT64
:
8952 case BFD_RELOC_X86_64_GOTPCREL64
:
8953 case BFD_RELOC_X86_64_GOTPC64
:
8954 case BFD_RELOC_X86_64_GOTPLT64
:
8955 case BFD_RELOC_X86_64_PLTOFF64
:
8956 as_bad_where (fixp
->fx_file
, fixp
->fx_line
,
8957 _("cannot represent relocation type %s in x32 mode"),
8958 bfd_get_reloc_code_name (code
));
8964 if (!fixp
->fx_pcrel
)
8965 rel
->addend
= fixp
->fx_offset
;
8969 case BFD_RELOC_X86_64_PLT32
:
8970 case BFD_RELOC_X86_64_GOT32
:
8971 case BFD_RELOC_X86_64_GOTPCREL
:
8972 case BFD_RELOC_X86_64_TLSGD
:
8973 case BFD_RELOC_X86_64_TLSLD
:
8974 case BFD_RELOC_X86_64_GOTTPOFF
:
8975 case BFD_RELOC_X86_64_GOTPC32_TLSDESC
:
8976 case BFD_RELOC_X86_64_TLSDESC_CALL
:
8977 rel
->addend
= fixp
->fx_offset
- fixp
->fx_size
;
8980 rel
->addend
= (section
->vma
8982 + fixp
->fx_addnumber
8983 + md_pcrel_from (fixp
));
8988 rel
->howto
= bfd_reloc_type_lookup (stdoutput
, code
);
8989 if (rel
->howto
== NULL
)
8991 as_bad_where (fixp
->fx_file
, fixp
->fx_line
,
8992 _("cannot represent relocation type %s"),
8993 bfd_get_reloc_code_name (code
));
8994 /* Set howto to a garbage value so that we can keep going. */
8995 rel
->howto
= bfd_reloc_type_lookup (stdoutput
, BFD_RELOC_32
);
8996 gas_assert (rel
->howto
!= NULL
);
9002 #include "tc-i386-intel.c"
9005 tc_x86_parse_to_dw2regnum (expressionS
*exp
)
9007 int saved_naked_reg
;
9008 char saved_register_dot
;
9010 saved_naked_reg
= allow_naked_reg
;
9011 allow_naked_reg
= 1;
9012 saved_register_dot
= register_chars
['.'];
9013 register_chars
['.'] = '.';
9014 allow_pseudo_reg
= 1;
9015 expression_and_evaluate (exp
);
9016 allow_pseudo_reg
= 0;
9017 register_chars
['.'] = saved_register_dot
;
9018 allow_naked_reg
= saved_naked_reg
;
9020 if (exp
->X_op
== O_register
&& exp
->X_add_number
>= 0)
9022 if ((addressT
) exp
->X_add_number
< i386_regtab_size
)
9024 exp
->X_op
= O_constant
;
9025 exp
->X_add_number
= i386_regtab
[exp
->X_add_number
]
9026 .dw2_regnum
[flag_code
>> 1];
9029 exp
->X_op
= O_illegal
;
9034 tc_x86_frame_initial_instructions (void)
9036 static unsigned int sp_regno
[2];
9038 if (!sp_regno
[flag_code
>> 1])
9040 char *saved_input
= input_line_pointer
;
9041 char sp
[][4] = {"esp", "rsp"};
9044 input_line_pointer
= sp
[flag_code
>> 1];
9045 tc_x86_parse_to_dw2regnum (&exp
);
9046 gas_assert (exp
.X_op
== O_constant
);
9047 sp_regno
[flag_code
>> 1] = exp
.X_add_number
;
9048 input_line_pointer
= saved_input
;
9051 cfi_add_CFA_def_cfa (sp_regno
[flag_code
>> 1], -x86_cie_data_alignment
);
9052 cfi_add_CFA_offset (x86_dwarf2_return_column
, x86_cie_data_alignment
);
9056 i386_elf_section_type (const char *str
, size_t len
)
9058 if (flag_code
== CODE_64BIT
9059 && len
== sizeof ("unwind") - 1
9060 && strncmp (str
, "unwind", 6) == 0)
9061 return SHT_X86_64_UNWIND
;
9068 i386_solaris_fix_up_eh_frame (segT sec
)
9070 if (flag_code
== CODE_64BIT
)
9071 elf_section_type (sec
) = SHT_X86_64_UNWIND
;
9077 tc_pe_dwarf2_emit_offset (symbolS
*symbol
, unsigned int size
)
9081 exp
.X_op
= O_secrel
;
9082 exp
.X_add_symbol
= symbol
;
9083 exp
.X_add_number
= 0;
9084 emit_expr (&exp
, size
);
9088 #if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
9089 /* For ELF on x86-64, add support for SHF_X86_64_LARGE. */
9092 x86_64_section_letter (int letter
, char **ptr_msg
)
9094 if (flag_code
== CODE_64BIT
)
9097 return SHF_X86_64_LARGE
;
9099 *ptr_msg
= _("bad .section directive: want a,l,w,x,M,S,G,T in string");
9102 *ptr_msg
= _("bad .section directive: want a,w,x,M,S,G,T in string");
9107 x86_64_section_word (char *str
, size_t len
)
9109 if (len
== 5 && flag_code
== CODE_64BIT
&& CONST_STRNEQ (str
, "large"))
9110 return SHF_X86_64_LARGE
;
9116 handle_large_common (int small ATTRIBUTE_UNUSED
)
9118 if (flag_code
!= CODE_64BIT
)
9120 s_comm_internal (0, elf_common_parse
);
9121 as_warn (_(".largecomm supported only in 64bit mode, producing .comm"));
9125 static segT lbss_section
;
9126 asection
*saved_com_section_ptr
= elf_com_section_ptr
;
9127 asection
*saved_bss_section
= bss_section
;
9129 if (lbss_section
== NULL
)
9131 flagword applicable
;
9133 subsegT subseg
= now_subseg
;
9135 /* The .lbss section is for local .largecomm symbols. */
9136 lbss_section
= subseg_new (".lbss", 0);
9137 applicable
= bfd_applicable_section_flags (stdoutput
);
9138 bfd_set_section_flags (stdoutput
, lbss_section
,
9139 applicable
& SEC_ALLOC
);
9140 seg_info (lbss_section
)->bss
= 1;
9142 subseg_set (seg
, subseg
);
9145 elf_com_section_ptr
= &_bfd_elf_large_com_section
;
9146 bss_section
= lbss_section
;
9148 s_comm_internal (0, elf_common_parse
);
9150 elf_com_section_ptr
= saved_com_section_ptr
;
9151 bss_section
= saved_bss_section
;
9156 handle_quad (int nbytes
)
9160 if (x86_elf_abi
!= X86_64_X32_ABI
)
9166 if (is_it_end_of_statement ())
9168 demand_empty_rest_of_line ();
9174 if (*input_line_pointer
== '"')
9176 as_bad (_("unexpected `\"' in expression"));
9177 ignore_rest_of_line ();
9180 x86_cons (&exp
, nbytes
);
9181 /* Output 4 bytes if not constant. */
9182 if (exp
.X_op
!= O_constant
)
9184 emit_expr (&exp
, (unsigned int) nbytes
);
9185 /* Zero-extends to 8 bytes if not constant. */
9188 memset (&exp
, '\0', sizeof (exp
));
9189 exp
.X_op
= O_constant
;
9190 emit_expr (&exp
, nbytes
);
9194 while (*input_line_pointer
++ == ',');
9196 input_line_pointer
--; /* Put terminator back into stream. */
9198 demand_empty_rest_of_line ();
9200 #endif /* OBJ_ELF || OBJ_MAYBE_ELF */