gas/config/tc-i386.h

   1 /* tc-i386.h -- Header file for tc-i386.c
   2    Copyright (C) 1989, 92, 93, 94, 95, 96, 97, 98, 99, 2000
   3    Free Software Foundation.
   4
   5    This file is part of GAS, the GNU Assembler.
   6
   7    GAS is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 2, or (at your option)
  10    any later version.
  11
  12    GAS is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with GAS; see the file COPYING.  If not, write to the Free
  19    Software Foundation, 59 Temple Place - Suite 330, Boston, MA
  20    02111-1307, USA.  */
  21
  22 #ifndef TC_I386
  23 #define TC_I386 1
  24
  25 #ifdef ANSI_PROTOTYPES
  26 struct fix;
  27 #endif
  28
  29 #define TARGET_BYTES_BIG_ENDIAN 0
  30
  31 #ifdef TE_LYNX
  32 #define TARGET_FORMAT           "coff-i386-lynx"
  33 #endif
  34
  35 #ifdef BFD_ASSEMBLER
  36 /* This is used to determine relocation types in tc-i386.c.  The first
  37    parameter is the current relocation type, the second one is the desired
  38    type.  The idea is that if the original type is already some kind of PIC
  39    relocation, we leave it alone, otherwise we give it the desired type */
  40
  41 #define tc_fix_adjustable(X)  tc_i386_fix_adjustable(X)
  42 extern int tc_i386_fix_adjustable PARAMS ((struct fix *));
  43
  44 /* This is the relocation type for direct references to GLOBAL_OFFSET_TABLE.
  45  * It comes up in complicated expressions such as
  46  * _GLOBAL_OFFSET_TABLE_+[.-.L284], which cannot be expressed normally with
  47  * the regular expressions.  The fixup specified here when used at runtime
  48  * implies that we should add the address of the GOT to the specified location,
  49  * and as a result we have simplified the expression into something we can use.
  50  */
  51 #define TC_RELOC_GLOBAL_OFFSET_TABLE BFD_RELOC_386_GOTPC
  52
  53 /* This expression evaluates to false if the relocation is for a local object
  54    for which we still want to do the relocation at runtime.  True if we
  55    are willing to perform this relocation while building the .o file.
  56    This is only used for pcrel relocations, so GOTOFF does not need to be
  57    checked here.  I am not sure if some of the others are ever used with
  58    pcrel, but it is easier to be safe than sorry. */
  59
  60 #define TC_RELOC_RTSYM_LOC_FIXUP(FIX)                           \
  61   ((FIX)->fx_r_type != BFD_RELOC_386_PLT32                      \
  62    && (FIX)->fx_r_type != BFD_RELOC_386_GOT32                   \
  63    && (FIX)->fx_r_type != BFD_RELOC_386_GOTPC                   \
  64    && ((FIX)->fx_addsy == NULL                                  \
  65        || (! S_IS_EXTERNAL ((FIX)->fx_addsy)                    \
  66            && ! S_IS_WEAK ((FIX)->fx_addsy)                     \
  67            && S_IS_DEFINED ((FIX)->fx_addsy)                    \
  68            && ! S_IS_COMMON ((FIX)->fx_addsy))))
  69
  70 #define TARGET_ARCH             bfd_arch_i386
  71
  72 #ifdef TE_NetBSD
  73 #define AOUT_TARGET_FORMAT      "a.out-i386-netbsd"
  74 #endif
  75 #ifdef TE_386BSD
  76 #define AOUT_TARGET_FORMAT      "a.out-i386-bsd"
  77 #endif
  78 #ifdef TE_LINUX
  79 #define AOUT_TARGET_FORMAT      "a.out-i386-linux"
  80 #endif
  81 #ifdef TE_Mach
  82 #define AOUT_TARGET_FORMAT      "a.out-mach3"
  83 #endif
  84 #ifdef TE_DYNIX
  85 #define AOUT_TARGET_FORMAT      "a.out-i386-dynix"
  86 #endif
  87 #ifndef AOUT_TARGET_FORMAT
  88 #define AOUT_TARGET_FORMAT      "a.out-i386"
  89 #endif
  90
  91 #if ((defined (OBJ_MAYBE_ELF) && defined (OBJ_MAYBE_COFF)) \
  92      || (defined (OBJ_MAYBE_ELF) && defined (OBJ_MAYBE_AOUT)) \
  93      || (defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)))
  94 extern const char *i386_target_format PARAMS ((void));
  95 #define TARGET_FORMAT i386_target_format ()
  96 #else
  97 #ifdef OBJ_ELF
  98 #define TARGET_FORMAT           "elf32-i386"
  99 #endif
 100 #ifdef OBJ_AOUT
 101 #define TARGET_FORMAT           AOUT_TARGET_FORMAT
 102 #endif
 103 #endif
 104
 105 #else /* ! BFD_ASSEMBLER */
 106
 107 /* COFF STUFF */
 108
 109 #define COFF_MAGIC I386MAGIC
 110 #define BFD_ARCH bfd_arch_i386
 111 #define COFF_FLAGS F_AR32WR
 112 #define TC_COUNT_RELOC(x) ((x)->fx_addsy || (x)->fx_r_type==7)
 113 #define TC_COFF_FIX2RTYPE(fixP) tc_coff_fix2rtype(fixP)
 114 extern short tc_coff_fix2rtype PARAMS ((struct fix *));
 115 #define TC_COFF_SIZEMACHDEP(frag) tc_coff_sizemachdep(frag)
 116 extern int tc_coff_sizemachdep PARAMS ((fragS *frag));
 117
 118 #ifdef TE_GO32
 119 /* DJGPP now expects some sections to be 2**4 aligned.  */
 120 #define SUB_SEGMENT_ALIGN(SEG)                                          \
 121   ((strcmp (obj_segment_name (SEG), ".text") == 0                       \
 122     || strcmp (obj_segment_name (SEG), ".data") == 0                    \
 123     || strcmp (obj_segment_name (SEG), ".bss") == 0                     \
 124     || strncmp (obj_segment_name (SEG), ".gnu.linkonce.t", 15) == 0     \
 125     || strncmp (obj_segment_name (SEG), ".gnu.linkonce.d", 15) == 0     \
 126     || strncmp (obj_segment_name (SEG), ".gnu.linkonce.r", 15) == 0)    \
 127    ? 4                                                                  \
 128    : 2)
 129 #else
 130 #define SUB_SEGMENT_ALIGN(SEG) 2
 131 #endif
 132
 133 #define TC_RVA_RELOC 7
 134 /* Need this for PIC relocations */
 135 #define NEED_FX_R_TYPE
 136
 137
 138 #ifdef TE_386BSD
 139 /* The BSDI linker apparently rejects objects with a machine type of
 140    M_386 (100).  */
 141 #define AOUT_MACHTYPE 0
 142 #else
 143 #define AOUT_MACHTYPE 100
 144 #endif
 145
 146 #undef REVERSE_SORT_RELOCS
 147
 148 #endif /* ! BFD_ASSEMBLER */
 149
 150 #define TC_FORCE_RELOCATION(fixp) tc_i386_force_relocation(fixp)
 151 extern int tc_i386_force_relocation PARAMS ((struct fix *));
 152
 153 #ifdef BFD_ASSEMBLER
 154 #define NO_RELOC BFD_RELOC_NONE
 155 #else
 156 #define NO_RELOC 0
 157 #endif
 158 #define tc_coff_symbol_emit_hook(a)     ;       /* not used */
 159
 160 #ifndef BFD_ASSEMBLER
 161 #ifndef OBJ_AOUT
 162 #ifndef TE_PE
 163 #ifndef TE_GO32
 164 /* Local labels starts with .L */
 165 #define LOCAL_LABEL(name) (name[0] == '.' \
 166                  && (name[1] == 'L' || name[1] == 'X' || name[1] == '.'))
 167 #endif
 168 #endif
 169 #endif
 170 #endif
 171
 172 #define LOCAL_LABELS_FB 1
 173
 174 #define tc_aout_pre_write_hook(x)       {;}     /* not used */
 175 #define tc_crawl_symbol_chain(a)        {;}     /* not used */
 176 #define tc_headers_hook(a)              {;}     /* not used */
 177
 178 extern const char extra_symbol_chars[];
 179 #define tc_symbol_chars extra_symbol_chars
 180
 181 #define MAX_OPERANDS 3          /* max operands per insn */
 182 #define MAX_IMMEDIATE_OPERANDS 2/* max immediates per insn (lcall, ljmp) */
 183 #define MAX_MEMORY_OPERANDS 2   /* max memory refs per insn (string ops) */
 184
 185 /* Prefixes will be emitted in the order defined below.
 186    WAIT_PREFIX must be the first prefix since FWAIT is really is an
 187    instruction, and so must come before any prefixes. */
 188 #define WAIT_PREFIX     0
 189 #define LOCKREP_PREFIX  1
 190 #define ADDR_PREFIX     2
 191 #define DATA_PREFIX     3
 192 #define SEG_PREFIX      4
 193 #define MAX_PREFIXES    5       /* max prefixes per opcode */
 194
 195 /* we define the syntax here (modulo base,index,scale syntax) */
 196 #define REGISTER_PREFIX '%'
 197 #define IMMEDIATE_PREFIX '$'
 198 #define ABSOLUTE_PREFIX '*'
 199
 200 #define TWO_BYTE_OPCODE_ESCAPE 0x0f
 201 #define NOP_OPCODE (char) 0x90
 202
 203 /* register numbers */
 204 #define EBP_REG_NUM 5
 205 #define ESP_REG_NUM 4
 206
 207 /* modrm_byte.regmem for twobyte escape */
 208 #define ESCAPE_TO_TWO_BYTE_ADDRESSING ESP_REG_NUM
 209 /* index_base_byte.index for no index register addressing */
 210 #define NO_INDEX_REGISTER ESP_REG_NUM
 211 /* index_base_byte.base for no base register addressing */
 212 #define NO_BASE_REGISTER EBP_REG_NUM
 213 #define NO_BASE_REGISTER_16 6
 214
 215 /* these are the instruction mnemonic suffixes.  */
 216 #define WORD_MNEM_SUFFIX  'w'
 217 #define BYTE_MNEM_SUFFIX  'b'
 218 #define SHORT_MNEM_SUFFIX 's'
 219 #define LONG_MNEM_SUFFIX  'l'
 220 /* Intel Syntax */
 221 #define LONG_DOUBLE_MNEM_SUFFIX 'x'
 222 /* Intel Syntax */
 223 #define DWORD_MNEM_SUFFIX 'd'
 224
 225 /* modrm.mode = REGMEM_FIELD_HAS_REG when a register is in there */
 226 #define REGMEM_FIELD_HAS_REG 0x3/* always = 0x3 */
 227 #define REGMEM_FIELD_HAS_MEM (~REGMEM_FIELD_HAS_REG)
 228
 229 #define END_OF_INSN '\0'
 230
 231 /* Intel Syntax */
 232 /* Values 0-4 map onto scale factor */
 233 #define BYTE_PTR     0
 234 #define WORD_PTR     1
 235 #define DWORD_PTR    2
 236 #define QWORD_PTR    3
 237 #define XWORD_PTR    4
 238 #define SHORT        5
 239 #define OFFSET_FLAT  6
 240 #define FLAT         7
 241 #define NONE_FOUND   8
 242
 243
 244 typedef struct
 245 {
 246   /* instruction name sans width suffix ("mov" for movl insns) */
 247   char *name;
 248
 249   /* how many operands */
 250   unsigned int operands;
 251
 252   /* base_opcode is the fundamental opcode byte without optional
 253      prefix(es).  */
 254   unsigned int base_opcode;
 255
 256   /* extension_opcode is the 3 bit extension for group <n> insns.
 257      This field is also used to store the 8-bit opcode suffix for the
 258      AMD 3DNow! instructions.
 259      If this template has no extension opcode (the usual case) use None */
 260   unsigned int extension_opcode;
 261 #define None 0xffff             /* If no extension_opcode is possible. */
 262
 263   /* cpu feature flags */
 264   unsigned int cpu_flags;
 265 #define Cpu086            0x1   /* Any old cpu will do, 0 does the same */
 266 #define Cpu186            0x2   /* i186 or better required */
 267 #define Cpu286            0x4   /* i286 or better required */
 268 #define Cpu386            0x8   /* i386 or better required */
 269 #define Cpu486           0x10   /* i486 or better required */
 270 #define Cpu586           0x20   /* i585 or better required */
 271 #define Cpu686           0x40   /* i686 or better required */
 272 #define CpuMMX           0x80   /* MMX support required */
 273 #define CpuSSE          0x100   /* Streaming SIMD extensions required */
 274 #define Cpu3dnow        0x200   /* 3dnow! support required */
 275
 276   /* the bits in opcode_modifier are used to generate the final opcode from
 277      the base_opcode.  These bits also are used to detect alternate forms of
 278      the same instruction */
 279   unsigned int opcode_modifier;
 280
 281   /* opcode_modifier bits: */
 282 #define W                  0x1  /* set if operands can be words or dwords
 283                                    encoded the canonical way */
 284 #define D                  0x2  /* D = 0 if Reg --> Regmem;
 285                                    D = 1 if Regmem --> Reg:    MUST BE 0x2 */
 286 #define Modrm              0x4
 287 #define FloatR             0x8  /* src/dest swap for floats:   MUST BE 0x8 */
 288 #define ShortForm         0x10  /* register is in low 3 bits of opcode */
 289 #define FloatMF           0x20  /* FP insn memory format bit, sized by 0x4 */
 290 #define Jump              0x40  /* special case for jump insns. */
 291 #define JumpDword         0x80  /* call and jump */
 292 #define JumpByte         0x100  /* loop and jecxz */
 293 #define JumpInterSegment 0x200  /* special case for intersegment leaps/calls */
 294 #define FloatD           0x400  /* direction for float insns:  MUST BE 0x400 */
 295 #define Seg2ShortForm    0x800  /* encoding of load segment reg insns */
 296 #define Seg3ShortForm   0x1000  /* fs/gs segment register insns. */
 297 #define Size16          0x2000  /* needs size prefix if in 32-bit mode */
 298 #define Size32          0x4000  /* needs size prefix if in 16-bit mode */
 299 #define IgnoreSize      0x8000  /* instruction ignores operand size prefix */
 300 #define DefaultSize    0x10000  /* default insn size depends on mode */
 301 #define No_bSuf        0x20000  /* b suffix on instruction illegal */
 302 #define No_wSuf        0x40000  /* w suffix on instruction illegal */
 303 #define No_lSuf        0x80000  /* l suffix on instruction illegal */
 304 #define No_sSuf       0x100000  /* s suffix on instruction illegal */
 305 #define No_dSuf       0x200000  /* d suffix on instruction illegal */
 306 #define No_xSuf       0x400000  /* x suffix on instruction illegal */
 307 #define FWait         0x800000  /* instruction needs FWAIT */
 308 #define IsString     0x1000000  /* quick test for string instructions */
 309 #define regKludge    0x2000000  /* fake an extra reg operand for clr, imul */
 310 #define IsPrefix     0x4000000  /* opcode is a prefix */
 311 #define ImmExt       0x8000000  /* instruction has extension in 8 bit imm */
 312 #define Ugh         0x80000000  /* deprecated fp insn, gets a warning */
 313
 314   /* operand_types[i] describes the type of operand i.  This is made
 315      by OR'ing together all of the possible type masks.  (e.g.
 316      'operand_types[i] = Reg|Imm' specifies that operand i can be
 317      either a register or an immediate operand.  */
 318   unsigned int operand_types[3];
 319
 320   /* operand_types[i] bits */
 321   /* register */
 322 #define Reg8               0x1  /* 8 bit reg */
 323 #define Reg16              0x2  /* 16 bit reg */
 324 #define Reg32              0x4  /* 32 bit reg */
 325   /* immediate */
 326 #define Imm8               0x8  /* 8 bit immediate */
 327 #define Imm8S             0x10  /* 8 bit immediate sign extended */
 328 #define Imm16             0x20  /* 16 bit immediate */
 329 #define Imm32             0x40  /* 32 bit immediate */
 330 #define Imm1              0x80  /* 1 bit immediate */
 331   /* memory */
 332 #define BaseIndex        0x100
 333   /* Disp8,16,32 are used in different ways, depending on the
 334      instruction.  For jumps, they specify the size of the PC relative
 335      displacement, for baseindex type instructions, they specify the
 336      size of the offset relative to the base register, and for memory
 337      offset instructions such as `mov 1234,%al' they specify the size of
 338      the offset relative to the segment base.  */
 339 #define Disp8            0x200  /* 8 bit displacement */
 340 #define Disp16           0x400  /* 16 bit displacement */
 341 #define Disp32           0x800  /* 32 bit displacement */
 342   /* specials */
 343 #define InOutPortReg    0x1000  /* register to hold in/out port addr = dx */
 344 #define ShiftCount      0x2000  /* register to hold shift cound = cl */
 345 #define Control         0x4000  /* Control register */
 346 #define Debug           0x8000  /* Debug register */
 347 #define Test           0x10000  /* Test register */
 348 #define FloatReg       0x20000  /* Float register */
 349 #define FloatAcc       0x40000  /* Float stack top %st(0) */
 350 #define SReg2          0x80000  /* 2 bit segment register */
 351 #define SReg3         0x100000  /* 3 bit segment register */
 352 #define Acc           0x200000  /* Accumulator %al or %ax or %eax */
 353 #define JumpAbsolute  0x400000
 354 #define RegMMX        0x800000  /* MMX register */
 355 #define RegXMM       0x1000000  /* XMM registers in PIII */
 356 #define EsSeg        0x2000000  /* String insn operand with fixed es segment */
 357   /* InvMem is for instructions with a modrm byte that only allow a
 358      general register encoding in the i.tm.mode and i.tm.regmem fields,
 359      eg. control reg moves.  They really ought to support a memory form,
 360      but don't, so we add an InvMem flag to the register operand to
 361      indicate that it should be encoded in the i.tm.regmem field.  */
 362 #define InvMem       0x4000000
 363
 364 #define Reg     (Reg8|Reg16|Reg32)      /* gen'l register */
 365 #define WordReg (Reg16|Reg32)
 366 #define ImplicitRegister (InOutPortReg|ShiftCount|Acc|FloatAcc)
 367 #define Imm     (Imm8|Imm8S|Imm16|Imm32) /* gen'l immediate */
 368 #define Disp    (Disp8|Disp16|Disp32)   /* General displacement */
 369 #define AnyMem  (Disp|BaseIndex|InvMem) /* General memory */
 370   /* The following aliases are defined because the opcode table
 371      carefully specifies the allowed memory types for each instruction.
 372      At the moment we can only tell a memory reference size by the
 373      instruction suffix, so there's not much point in defining Mem8,
 374      Mem16, Mem32 and Mem64 opcode modifiers - We might as well just use
 375      the suffix directly to check memory operands.  */
 376 #define LLongMem AnyMem         /* 64 bits (or more) */
 377 #define LongMem AnyMem          /* 32 bit memory ref */
 378 #define ShortMem AnyMem         /* 16 bit memory ref */
 379 #define WordMem AnyMem          /* 16 or 32 bit memory ref */
 380 #define ByteMem AnyMem          /* 8 bit memory ref */
 381 }
 382 template;
 383
 384 /*
 385   'templates' is for grouping together 'template' structures for opcodes
 386   of the same name.  This is only used for storing the insns in the grand
 387   ole hash table of insns.
 388   The templates themselves start at START and range up to (but not including)
 389   END.
 390   */
 391 typedef struct
 392 {
 393   const template *start;
 394   const template *end;
 395 }
 396 templates;
 397
 398 /* these are for register name --> number & type hash lookup */
 399 typedef struct
 400 {
 401   char *reg_name;
 402   unsigned int reg_type;
 403   unsigned int reg_num;
 404 }
 405 reg_entry;
 406
 407 typedef struct
 408 {
 409   char *seg_name;
 410   unsigned int seg_prefix;
 411 }
 412 seg_entry;
 413
 414 /* 386 operand encoding bytes:  see 386 book for details of this. */
 415 typedef struct
 416 {
 417   unsigned int regmem;  /* codes register or memory operand */
 418   unsigned int reg;     /* codes register operand (or extended opcode) */
 419   unsigned int mode;    /* how to interpret regmem & reg */
 420 }
 421 modrm_byte;
 422
 423 /* 386 opcode byte to code indirect addressing. */
 424 typedef struct
 425 {
 426   unsigned base;
 427   unsigned index;
 428   unsigned scale;
 429 }
 430 sib_byte;
 431
 432 /* x86 arch names and features */
 433 typedef struct
 434 {
 435   const char *name;     /* arch name */
 436   unsigned int flags;   /* cpu feature flags */
 437 }
 438 arch_entry;
 439
 440 /* The name of the global offset table generated by the compiler. Allow
 441    this to be overridden if need be. */
 442 #ifndef GLOBAL_OFFSET_TABLE_NAME
 443 #define GLOBAL_OFFSET_TABLE_NAME "_GLOBAL_OFFSET_TABLE_"
 444 #endif
 445
 446 #ifdef BFD_ASSEMBLER
 447 void i386_validate_fix PARAMS ((struct fix *));
 448 #define TC_VALIDATE_FIX(FIXP,SEGTYPE,SKIP) i386_validate_fix(FIXP)
 449 #endif
 450
 451 #endif /* TC_I386 */
 452
 453 #define md_operand(x)
 454
 455 extern const struct relax_type md_relax_table[];
 456 #define TC_GENERIC_RELAX_TABLE md_relax_table
 457
 458 #define md_do_align(n, fill, len, max, around)                          \
 459 if ((n) && !need_pass_2                                                 \
 460     && (!(fill) || ((char)*(fill) == (char)0x90 && (len) == 1))         \
 461     && subseg_text_p (now_seg))                                         \
 462   {                                                                     \
 463     char *p;                                                            \
 464     p = frag_var (rs_align_code, 15, 1, (relax_substateT) max,          \
 465                   (symbolS *) 0, (offsetT) (n), (char *) 0);            \
 466     *p = 0x90;                                                          \
 467     goto around;                                                        \
 468   }
 469
 470 extern void i386_align_code PARAMS ((fragS *, int));
 471
 472 #define HANDLE_ALIGN(fragP)                                             \
 473 if (fragP->fr_type == rs_align_code)                                    \
 474   i386_align_code (fragP, (fragP->fr_next->fr_address                   \
 475                            - fragP->fr_address                          \
 476                            - fragP->fr_fix));
 477
 478 /* call md_apply_fix3 with segment instead of md_apply_fix */
 479 #define MD_APPLY_FIX3
 480
 481 void i386_print_statistics PARAMS ((FILE *));
 482 #define tc_print_statistics i386_print_statistics
 483
 484 #define md_number_to_chars number_to_chars_littleendian
 485
 486 #ifdef SCO_ELF
 487 #define tc_init_after_args() sco_id ()
 488 extern void sco_id PARAMS ((void));
 489 #endif
 490
 491 #define DIFF_EXPR_OK    /* foo-. gets turned into PC relative relocs */
 492
 493 /* end of tc-i386.h */