Set V850_OPERAND_ADJUST_SHORT_MEMORY flag on sst.{h,w}/sld.{h,w} instructions
[deliverable/binutils-gdb.git] / gas / configure.in
1 dnl Process this file with autoconf to produce a configure script.
2 dnl
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
5 dnl
6 dnl
7 AC_PREREQ(2.5)dnl v2.5 needed for --bindir et al
8 AC_INIT(as.h)dnl
9 dnl
10 user_bfd_gas=
11 AC_ARG_ENABLE(bfd-assembler,
12 [ --enable-bfd-assembler use BFD back end for writing object files],
13 [case "${enableval}" in
14 yes) need_bfd=yes user_bfd_gas=yes ;;
15 no) user_bfd_gas=no ;;
16 *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
17 esac])dnl
18 AC_ARG_ENABLE(targets,
19 [ targets alternative target configurations besides the primary],
20 [case "${enableval}" in
21 yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
22 ;;
23 no) enable_targets= ;;
24 *) enable_targets=$enableval ;;
25 esac])dnl
26 AC_ARG_ENABLE(shared,
27 [ --enable-shared build shared BFD library],
28 [case "${enableval}" in
29 yes) shared=true shared_bfd=true shared_opcodes=true ;;
30 no) shared=false ;;
31 *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
32 *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
33 *bfd*) shared=true shared_bfd=true ;;
34 *opcodes*) shared=true shared_opcodes=true ;;
35 *) shared=false ;;
36 esac])dnl
37
38 # Generate a header file -- gets more post-processing by Makefile later.
39 AC_CONFIG_HEADER(conf)
40
41 dnl For recursion to work right, this must be an absolute pathname.
42 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
43 AC_CANONICAL_SYSTEM
44 AC_ARG_PROGRAM
45
46 te_file=generic
47
48 canon_targets=""
49 if test -n "$enable_targets" ; then
50 for t in `echo $enable_targets | sed 's/,/ /g'`; do
51 result=`$ac_config_sub $t 2>/dev/null`
52 if test -n "$result" ; then
53 canon_targets="$canon_targets $result"
54 # else
55 # # Permit "all", etc. We don't support it yet though.
56 # canon_targets="$canon_targets $t"
57 fi
58 done
59 GAS_UNIQ(canon_targets)
60 fi
61
62 emulations=""
63
64 for this_target in $target $canon_targets ; do
65
66 changequote(,)dnl
67 eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
68 changequote([,])dnl
69
70 # check for architecture variants
71 case ${cpu} in
72 armeb) cpu_type=arm endian=big ;;
73 arm*) cpu_type=arm endian=little ;;
74 hppa*) cpu_type=hppa ;;
75 changequote(,)dnl
76 i[456]86) cpu_type=i386 ;;
77 m680[012346]0) cpu_type=m68k ;;
78 m68008) cpu_type=m68k ;;
79 m683??) cpu_type=m68k ;;
80 changequote([,])dnl
81 m8*) cpu_type=m88k ;;
82 mips*el) cpu_type=mips endian=little;;
83 mips*) cpu_type=mips endian=big ;;
84 powerpcle*) cpu_type=ppc endian=little ;;
85 powerpc*) cpu_type=ppc endian=big ;;
86 rs6000*) cpu_type=ppc ;;
87 sparc64) cpu_type=sparc want_sparc_v9=true ;;
88 sparc*) cpu_type=sparc ;;
89 *) cpu_type=${cpu} ;;
90 esac
91
92 if test ${this_target} = $target ; then
93 target_cpu_type=${cpu_type}
94 elif test ${target_cpu_type} != ${cpu_type} ; then
95 continue
96 fi
97
98 targ=${cpu_type}
99 generic_target=${cpu_type}-$vendor-$os
100 dev=no
101 bfd_gas=no
102 em=generic
103
104 # assign object format
105 case ${generic_target} in
106 a29k-*-coff) fmt=coff targ=ebmon29k ;;
107 a29k-amd-udi) fmt=coff targ=ebmon29k ;;
108 a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
109 a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
110 a29k-*-vxworks*) fmt=coff ;;
111
112 alpha-*-*vms*) fmt=evax ;;
113 alpha-*-netware*) fmt=ecoff ;;
114 alpha-*-osf*) fmt=ecoff ;;
115 alpha-*-linuxecoff*) fmt=ecoff ;;
116 alpha-*-linux*) fmt=elf em=linux ;;
117
118 # start-sanitize-arc
119 arc-*-elf*) fmt=elf bfd_gas=yes ;;
120 # end-sanitize-arc
121
122 arm-*-riscix*) fmt=aout targ=arm-lit em=riscix ;;
123 arm-*-aout) fmt=aout
124 case "$endian" in
125 big) targ=arm-big ;;
126 *) targ=arm-lit ;;
127 esac
128 ;;
129 arm-*-coff) fmt=coff ;;
130 arm-*-riscix*) fmt=aout ;;
131 arm-*-pe) fmt=coff targ=armcoff em=pe ;;
132
133 # start-sanitize-d10v
134 d10v-*-*) fmt=elf bfd_gas=yes ;;
135 # end-sanitize-d10v
136
137 hppa-*-*elf*) fmt=elf em=hppa ;;
138 hppa-*-lites*) fmt=elf em=hppa ;;
139 hppa-*-osf*) fmt=som em=hppa ;;
140 hppa-*-hpux*) fmt=som em=hppa ;;
141 hppa-*-bsd*) fmt=som em=hppa ;;
142 hppa-*-hiux*) fmt=som em=hppa ;;
143
144 h8300-*-coff) fmt=coff ;;
145
146 i386-ibm-aix*) fmt=coff targ=i386coff
147 em=i386aix ;;
148 i386-*-bsd*) fmt=aout em=386bsd ;;
149 i386-*-netbsd0.8) fmt=aout em=386bsd ;;
150 i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
151 i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
152 i386-*-linux*coff*) fmt=coff em=linux
153 targ=i386coff ;;
154 i386-*-linux*) fmt=elf em=linux ;;
155 i386-*-lynxos*) fmt=coff targ=i386coff
156 em=lynx ;;
157 i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
158 fmt=elf ;;
159 i386-*-sco*elf*) fmt=elf targ=sco5 ;;
160 i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
161 fmt=coff targ=i386coff ;;
162 i386-*-vsta) fmt=aout ;;
163 i386-*-go32) fmt=coff targ=i386coff ;;
164 i386-*-rtems*) fmt=coff targ=i386coff ;;
165 i386-*-gnu*) fmt=elf ;;
166 i386-*-mach*)
167 fmt=aout em=mach bfd_gas=yes ;;
168 i386-*-msdos*) fmt=aout ;;
169 i386-*-moss*) fmt=elf ;;
170 i386-*-pe) fmt=coff targ=i386coff em=pe ;;
171 i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
172 i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
173 i960-*-bout) fmt=bout ;;
174 i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
175 i960-*-rtems*) fmt=coff em=ic960 targ=ic960coff ;;
176 i960-*-nindy*) fmt=bout ;;
177 i960-*-vxworks4*) fmt=bout ;;
178 i960-*-vxworks5.0) fmt=bout ;;
179 i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
180 i960-*-vxworks*) fmt=bout ;;
181
182 m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
183 fmt=aout em=sun3 ;;
184 m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
185 m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
186 m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
187 m68k-*-sysv4 | m68k-*-elf) # must be before -sysv*
188 fmt=elf ;;
189 m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
190 fmt=coff targ=m68kcoff ;;
191 m68k-*-hpux*) fmt=hp300 em=hp300 ;;
192 m68k-*-linux*aout*) fmt=aout em=linux ;;
193 m68k-*-linux*) fmt=elf em=linux ;;
194 m68k-*-lynxos*) fmt=coff targ=m68kcoff
195 em=lynx ;;
196 m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
197 m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
198 m68k-*-psos*) fmt=elf em=psos;;
199
200 m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
201 m88k-*-coff*) fmt=coff targ=m88kcoff ;;
202
203 # don't change em like *-*-bsd does
204 mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
205 mips-dec-bsd*) fmt=aout targ=mips-lit ;;
206 mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
207 mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
208 mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
209 mips-*-osf*) fmt=ecoff targ=mips-lit endian=little ;;
210 mips-*-ecoff*) fmt=ecoff
211 case "$endian" in
212 big) targ=mips-big ;;
213 *) targ=mips-lit ;;
214 esac
215 ;;
216 mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
217 mips-*-gnu*) fmt=aout
218 case "$endian" in
219 big) targ=mips-big ;;
220 *) targ=mips-lit ;;
221 esac
222 ;;
223 mips-*-irix6*) fmt=elf targ=mips-big ;;
224 mips-*-irix5*) fmt=elf targ=mips-big ;;
225 mips-*-irix*) fmt=ecoff targ=mips-big ;;
226 mips-*-riscos*) fmt=ecoff targ=mips-big ;;
227 mips-*-sysv*) fmt=ecoff targ=mips-big ;;
228 mips-*-elf* | mips-*-rtems*)
229 fmt=elf
230 case "$endian" in
231 big) targ=mips-big ;;
232 *) targ=mips-lit ;;
233 esac
234 ;;
235 mn10200-*-*) fmt=elf bfd_gas=yes ;;
236 mn10300-*-*) fmt=elf bfd_gas=yes ;;
237 ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
238 fmt=coff em=pe
239 case "$endian" in
240 big) targ=ppc-big ;;
241 *) targ=ppc-lit ;;
242 esac
243 ;;
244 ppc-*-aix*) fmt=coff ;;
245 ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
246 fmt=elf
247 case "$endian" in
248 big) targ=ppc-big ;;
249 *) targ=ppc-lit ;;
250 esac
251 ;;
252 ppc-*-linux*) fmt=elf
253 case "$endian" in
254 big) targ=ppc-big ;;
255 *) AC_MSG_ERROR(Linux must be configured big endian) ;;
256 esac
257 ;;
258 ppc-*-solaris*) fmt=elf
259 case "$endian" in
260 big) AC_MSG_ERROR(Solaris must be configured little endian) ;;
261 *) targ=ppc-sol ;;
262 esac
263 ;;
264 ppc-*-rtems*)
265 fmt=elf
266 case "$endian" in
267 big) targ=ppc-big ;;
268 *) targ=ppc-lit ;;
269 esac
270 ;;
271 ppc-*-macos* | ppc-*-mpw*)
272 fmt=coff em=macos ;;
273 ppc-*-netware*) fmt=elf em=ppcnw ;;
274
275 sh-*-elf*) fmt=elf ;;
276 sh-*-coff*) fmt=coff ;;
277
278 ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
279 ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
280
281 sparc-*-rtems*) fmt=aout ;;
282 sparc-*-sunos4*) fmt=aout em=sun3 ;;
283 sparc-*-aout | sparc*-*-vxworks*)
284 fmt=aout em=sparcaout ;;
285 sparc-*-coff) fmt=coff ;;
286 sparc-*-lynxos*) fmt=coff em=lynx ;;
287 sparc-fujitsu-none) fmt=aout ;;
288 sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
289 fmt=elf ;;
290 sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
291
292 # start-sanitize-tic80
293 tic80-*-coff) fmt=coff targ=tic80coff;;
294 # end-sanitize-tic80
295 v850-*-*) fmt=elf bfd_gas=yes ;;
296
297 vax-*-bsd* | vax-*-ultrix*)
298 fmt=aout ;;
299 vax-*-vms) fmt=vms ;;
300
301 z8k-*-coff | z8k-*-sim)
302 fmt=coff ;;
303
304 w65-*-*) fmt=coff ;;
305
306 *-*-aout | *-*-scout)
307 fmt=aout ;;
308 *-*-nindy*)
309 fmt=bout ;;
310 *-*-bsd*)
311 fmt=aout em=sun3 ;;
312 *-*-generic) fmt=generic ;;
313 *-*-xray | *-*-hms) fmt=coff ;;
314 *-*-sim) fmt=coff ;;
315 *-*-elf | *-*-sysv4* | *-*-solaris*)
316 AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
317 fmt=elf dev=yes ;;
318 *-*-vxworks) fmt=aout ;;
319 *-*-netware) fmt=elf ;;
320 esac
321
322 case ${cpu_type}-${fmt} in
323 alpha-*) bfd_gas=yes ;;
324 arm-*) bfd_gas=yes ;;
325 # not yet
326 # i386-aout) bfd_gas=preferred ;;
327 mips-*) bfd_gas=yes ;;
328 ns32k-*) bfd_gas=yes ;;
329 ppc-*) bfd_gas=yes ;;
330 sparc-*) bfd_gas=yes ;;
331 *-elf) bfd_gas=yes ;;
332 *-ecoff) bfd_gas=yes ;;
333 *-som) bfd_gas=yes ;;
334 *) ;;
335 esac
336
337 # Other random stuff.
338
339 # do we need the opcodes library?
340 case ${cpu_type} in
341 vax | i386)
342 ;;
343 *)
344 need_opcodes=yes
345 if test "${shared_opcodes}" = "true"; then
346 # A shared libopcodes must be linked against libbfd.
347 need_bfd=yes
348 fi
349 ;;
350 esac
351
352 test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
353
354 case ${cpu}-${vendor}-${os} in
355 sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
356 esac
357
358 case ${cpu_type} in
359 m68k)
360 case ${extra_objects} in
361 *m68k-parse.o*) ;;
362 *) extra_objects="$extra_objects m68k-parse.o" ;;
363 esac
364 ;;
365 esac
366
367 # See if we really can support this configuration with the emulation code.
368
369 if test $this_target = $target ; then
370 primary_bfd_gas=$bfd_gas
371 obj_format=$fmt
372 gas_target=$targ
373 te_file=$em
374
375 if test $bfd_gas = no ; then
376 # Can't support other configurations this way.
377 break
378 fi
379 elif test $bfd_gas = no ; then
380 # Can't support this configuration.
381 break
382 fi
383
384 # From target name and format, produce a list of supported emulations.
385
386 case ${generic_target}-${fmt} in
387 mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
388 mips-*-*-ecoff) case "$endian" in
389 big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
390 *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
391 esac ;;
392 mips-*-*-elf) case "$endian" in
393 big) emulation="mipsbelf mipslelf mipself" ;;
394 *) emulation="mipslelf mipsbelf mipself" ;;
395 esac ;;
396 esac
397
398 emulations="$emulations $emulation"
399
400 done
401
402 # Assign floating point type. Most processors with FP support
403 # IEEE FP. On those that don't support FP at all, usually IEEE
404 # is emulated.
405 case ${target_cpu} in
406 vax | tahoe ) atof=${target_cpu} ;;
407 *) atof=ieee ;;
408 esac
409
410 case "${obj_format}" in
411 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
412 esac
413
414 dnl
415 dnl Make sure the desired support files exist.
416 dnl
417
418 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
419 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
420 fi
421
422 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
423 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
424 fi
425
426 # and target makefile frag
427
428 target_frag=${srcdir}/config/${gas_target}.mt
429 if test ! -r ${target_frag}; then
430 target_frag=/dev/null # ick! but subst_file can't be conditionalized
431 fi
432 AC_SUBST_FILE(target_frag)
433
434 case ${user_bfd_gas}-${primary_bfd_gas} in
435 yes-yes | no-no)
436 # We didn't override user's choice.
437 ;;
438 no-yes)
439 AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
440 ;;
441 no-preferred)
442 primary_bfd_gas=no
443 ;;
444 *-preferred)
445 primary_bfd_gas=yes
446 ;;
447 yes-*)
448 primary_bfd_gas=yes
449 ;;
450 -*)
451 # User specified nothing.
452 ;;
453 esac
454
455 # Some COFF configurations want these random other flags set.
456 case ${obj_format} in
457 coff)
458 case ${target_cpu_type} in
459 i386) AC_DEFINE(I386COFF) ;;
460 m68k) AC_DEFINE(M68KCOFF) ;;
461 m88k) AC_DEFINE(M88KCOFF) ;;
462 esac
463 ;;
464 esac
465
466 # Getting this done right is going to be a bitch. Each configuration specified
467 # with --enable-targets=... should be checked for environment, format, cpu, and
468 # bfd_gas setting.
469 #
470 # For each configuration, the necessary object file support code must be linked
471 # in. This might be only one, it might be up to four. The necessary emulation
472 # code needs to be provided, too.
473 #
474 # And then there's "--enable-targets=all"....
475 #
476 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
477
478 formats="${obj_format}"
479 emfiles=""
480 EMULATIONS=""
481 GAS_UNIQ(emulations)
482 for em in . $emulations ; do
483 case $em in
484 .) continue ;;
485 mipsbelf | mipslelf)
486 fmt=elf file=mipself ;;
487 mipsbecoff | mipslecoff)
488 fmt=ecoff file=mipsecoff ;;
489 esac
490 formats="$formats $fmt"
491 emfiles="$emfiles e-$file.o"
492 EMULATIONS="$EMULATIONS &$em,"
493 done
494 GAS_UNIQ(formats)
495 GAS_UNIQ(emfiles)
496 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
497 for fmt in $formats ; do
498 case $fmt in
499 aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
500 bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
501 coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
502 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
503 elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
504 generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
505 hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
506 ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
507 som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
508 vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
509 esac
510 extra_objects="$extra_objects obj-$fmt.o"
511 done
512 obj_format=multi
513 fi
514 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
515 te_file=multi
516 extra_objects="$extra_objects $emfiles"
517 DEFAULT_EMULATION=`set . $emulations ; echo $2`
518 AC_DEFINE(USE_EMULATIONS)
519 fi
520 AC_SUBST(extra_objects)
521 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
522 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
523
524 files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
525 config/obj-${obj_format}.h config/obj-${obj_format}.c \
526 config/te-${te_file}.h config/atof-${atof}.c \
527 $extra_files"
528 links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
529 $extra_links"
530
531 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
532 yes-*-coff) need_bfd=yes ;;
533 no-*-coff) need_bfd=yes
534 AC_DEFINE(MANY_SEGMENTS) ;;
535 esac
536
537 reject_dev_configs=yes
538
539 case ${reject_dev_configs}-${dev} in
540 yes-yes) # Oops.
541 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
542 ;;
543 esac
544
545 AC_SUBST(target_cpu_type)
546 AC_SUBST(obj_format)
547 AC_SUBST(atof)
548 dnl AC_SUBST(emulation)
549
550 AC_LINK_FILES($files, $links)
551
552 case "${primary_bfd_gas}" in
553 yes) AC_DEFINE(BFD_ASSEMBLER)
554 need_bfd=yes ;;
555 esac
556
557 # do we need the opcodes library?
558 case "${need_opcodes}" in
559 yes)
560 OPCODES_DEP=../opcodes/libopcodes.a
561 OPCODES_LIB='-L../opcodes -lopcodes'
562
563 # We need to handle some special cases for shared libraries.
564 case "${host}" in
565 *-*-sunos*)
566 # On SunOS, we must link against the name we are going to install,
567 # not -lbfd, since SunOS does not support SONAME.
568 if test "${shared_opcodes}" = "true"; then
569 OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
570 fi
571 ;;
572 alpha*-*-osf*)
573 # On Alpha OSF/1, the native linker searches all the -L
574 # directories for any LIB.so files, and only then searches for any
575 # LIB.a files. That means that if there is an installed
576 # libbfd.so, but this build is not done with --enable-shared, the
577 # link will wind up being against the install libbfd.so rather
578 # than the newly built libbfd. To avoid this, we must explicitly
579 # link against libbfd.a when --enable-shared is not used.
580 if test "${shared_opcodes}" != "true"; then
581 OPCODES_LIB='../opcodes/libopcodes.a'
582 fi
583 ;;
584 esac
585 ;;
586 esac
587 AC_SUBST(OPCODES_DEP)
588 AC_SUBST(OPCODES_LIB)
589
590 case "${need_bfd}" in
591 yes)
592 BFDDEP=../bfd/libbfd.a
593 BFDLIB='-L../bfd -lbfd'
594 ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
595
596 # We need to handle some special cases for shared libraries
597 case "${host}" in
598 *-*-sunos*)
599 # On SunOS, we must link against the name we are going to install,
600 # not -lbfd, since SunOS does not support SONAME.
601 if test "${shared_bfd}" = "true"; then
602 BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
603 fi
604 ;;
605 alpha*-*-osf*)
606 # On Alpha OSF/1, the native linker searches all the -L
607 # directories for any LIB.so files, and only then searches for any
608 # LIB.a files. That means that if there is an installed
609 # libbfd.so, but this build is not done with --enable-shared, the
610 # link will wind up being against the install libbfd.so rather
611 # than the newly built libbfd. To avoid this, we must explicitly
612 # link against libbfd.a when --enable-shared is not used.
613 if test "${shared_bfd}" != "true"; then
614 BFDLIB='../bfd/libbfd.a'
615 fi
616 ;;
617 esac
618 ;;
619 esac
620 AC_SUBST(BFDDEP)
621 AC_SUBST(BFDLIB)
622 AC_SUBST(ALL_OBJ_DEPS)
623
624 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
625 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
626 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
627 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
628 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
629
630 AC_PROG_CC
631 AC_PROG_INSTALL
632
633 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
634
635 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
636 # people who are not cross-compiling but are compiling cross-assemblers.
637 AC_MSG_CHECKING(whether compiling a cross-assembler)
638 if test "${host}" = "${target}"; then
639 cross_gas=no
640 else
641 cross_gas=yes
642 AC_DEFINE(CROSS_COMPILE)
643 fi
644 AC_MSG_RESULT($cross_gas)
645
646 dnl ansidecl.h will deal with const
647 dnl AC_CONST
648 AC_FUNC_ALLOCA
649 AC_C_INLINE
650
651 # VMS doesn't have unlink.
652 AC_CHECK_FUNCS(unlink remove, break)
653
654 # Some systems don't have sbrk().
655 AC_CHECK_FUNCS(sbrk)
656
657 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
658 # enough, but on some of those systems, the assert macro relies on requoting
659 # working properly!
660 GAS_WORKING_ASSERT
661
662 # On some systems, the system header files may not declare malloc, realloc,
663 # and free. There are places where gas needs these functions to have been
664 # declared -- such as when taking their addresses.
665 gas_test_headers="
666 #ifdef HAVE_MEMORY_H
667 #include <memory.h>
668 #endif
669 #ifdef HAVE_STRING_H
670 #include <string.h>
671 #else
672 #ifdef HAVE_STRINGS_H
673 #include <strings.h>
674 #endif
675 #endif
676 #ifdef HAVE_STDLIB_H
677 #include <stdlib.h>
678 #endif
679 #ifdef HAVE_UNISTD_H
680 #include <unistd.h>
681 #endif
682 "
683 GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
684 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
685 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
686 GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
687
688 # Does errno.h declare errno, or do we have to add a separate declaration
689 # for it?
690 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
691 #ifdef HAVE_ERRNO_H
692 #include <errno.h>
693 #endif
694 ])
695
696 HLDFLAGS=
697 HLDENV=
698 RPATH_ENVVAR=LD_LIBRARY_PATH
699 # If we have shared libraries, try to set rpath reasonably.
700 if test "${shared}" = "true"; then
701 case "${host}" in
702 *-*-hpux*)
703 HLDFLAGS='-Wl,+s,+b,$(libdir)'
704 RPATH_ENVVAR=SHLIB_PATH
705 ;;
706 *-*-irix5* | *-*-irix6*)
707 HLDFLAGS='-Wl,-rpath,$(libdir)'
708 ;;
709 *-*-linux*aout*)
710 ;;
711 *-*-linux*)
712 HLDFLAGS='-Wl,-rpath,$(libdir)'
713 ;;
714 *-*-solaris*)
715 HLDFLAGS='-R $(libdir)'
716 ;;
717 *-*-sysv4*)
718 HLDENV='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
719 ;;
720 esac
721 fi
722
723 # On SunOS, if the linker supports the -rpath option, use it to
724 # prevent ../bfd and ../opcodes from being included in the run time
725 # search path.
726 case "${host}" in
727 *-*-sunos*)
728 echo 'main () { }' > conftest.c
729 ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
730 if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
731 :
732 elif grep 'No such file' conftest.t >/dev/null 2>&1; then
733 :
734 elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
735 :
736 elif test "${shared}" = "true"; then
737 HLDFLAGS='-Wl,-rpath=$(libdir)'
738 else
739 HLDFLAGS='-Wl,-rpath='
740 fi
741 rm -f conftest.t conftest.c conftest
742 ;;
743 esac
744 AC_SUBST(HLDFLAGS)
745 AC_SUBST(HLDENV)
746 AC_SUBST(RPATH_ENVVAR)
747
748 dnl This must come last.
749 AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)
This page took 0.046799 seconds and 4 git commands to generate.