1 dnl Process this file with autoconf to produce a configure script.
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
7 AC_PREREQ(2.5)dnl v2.5 needed for --bindir et al
11 AC_ARG_ENABLE(bfd-assembler,
12 [ --enable-bfd-assembler use BFD back end for writing object files],
13 [case "${enableval}" in
14 yes) need_bfd=yes user_bfd_gas=yes ;;
15 no) user_bfd_gas=no ;;
16 *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
18 AC_ARG_ENABLE(targets,
19 [ targets alternative target configurations besides the primary],
20 [case "${enableval}" in
21 yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
23 no) enable_targets= ;;
24 *) enable_targets=$enableval ;;
27 [ --enable-shared build shared BFD library],
28 [case "${enableval}" in
29 yes) shared=true shared_bfd=true shared_opcodes=true ;;
31 *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
32 *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
33 *bfd*) shared=true shared_bfd=true ;;
34 *opcodes*) shared=true shared_opcodes=true ;;
38 # Generate a header file -- gets more post-processing by Makefile later.
39 AC_CONFIG_HEADER(conf)
41 dnl For recursion to work right, this must be an absolute pathname.
42 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
49 if test -n "$enable_targets" ; then
50 for t in `echo $enable_targets | sed 's/,/ /g'`; do
51 result=`$ac_config_sub $t 2>/dev/null`
52 if test -n "$result" ; then
53 canon_targets="$canon_targets $result"
55 # # Permit "all", etc. We don't support it yet though.
56 # canon_targets="$canon_targets $t"
59 GAS_UNIQ(canon_targets)
64 for this_target in $target $canon_targets ; do
67 eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
70 # check for architecture variants
72 armeb) cpu_type=arm endian=big ;;
73 arm*) cpu_type=arm endian=little ;;
74 hppa*) cpu_type=hppa ;;
76 i[456]86) cpu_type=i386 ;;
77 m680[012346]0) cpu_type=m68k ;;
78 m68008) cpu_type=m68k ;;
79 m683??) cpu_type=m68k ;;
82 mips*el) cpu_type=mips endian=little ;;
83 mips*) cpu_type=mips endian=big ;;
84 powerpcle*) cpu_type=ppc endian=little ;;
85 powerpc*) cpu_type=ppc endian=big ;;
86 rs6000*) cpu_type=ppc ;;
87 sparc64) cpu_type=sparc want_sparc_v9=true ;;
88 sparc*) cpu_type=sparc ;;
92 if test ${this_target} = $target ; then
93 target_cpu_type=${cpu_type}
94 elif test ${target_cpu_type} != ${cpu_type} ; then
99 generic_target=${cpu_type}-$vendor-$os
104 # assign object format
105 case ${generic_target} in
106 a29k-*-coff) fmt=coff targ=ebmon29k ;;
107 a29k-amd-udi) fmt=coff targ=ebmon29k ;;
108 a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
109 a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
110 a29k-*-vxworks*) fmt=coff ;;
112 alpha-*-*vms*) fmt=evax ;;
113 alpha-*-netware*) fmt=ecoff ;;
114 alpha-*-osf*) fmt=ecoff ;;
115 alpha-*-linuxecoff*) fmt=ecoff ;;
116 alpha-*-linux*) fmt=elf em=linux ;;
119 arc-*-elf*) fmt=elf bfd_gas=yes ;;
122 arm-*-riscix*) fmt=aout targ=arm-lit em=riscix ;;
129 arm-*-coff) fmt=coff ;;
130 arm-*-riscix*) fmt=aout ;;
131 arm-*-pe) fmt=coff targ=armcoff em=pe ;;
133 # start-sanitize-d10v
134 d10v-*-*) fmt=elf bfd_gas=yes ;;
137 hppa-*-*elf*) fmt=elf em=hppa ;;
138 hppa-*-lites*) fmt=elf em=hppa ;;
139 hppa-*-osf*) fmt=som em=hppa ;;
140 hppa-*-hpux*) fmt=som em=hppa ;;
141 hppa-*-bsd*) fmt=som em=hppa ;;
142 hppa-*-hiux*) fmt=som em=hppa ;;
144 h8300-*-coff) fmt=coff ;;
146 i386-ibm-aix*) fmt=coff targ=i386coff
148 i386-*-bsd*) fmt=aout em=386bsd ;;
149 i386-*-netbsd0.8) fmt=aout em=386bsd ;;
150 i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
151 i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
152 i386-*-linux*coff*) fmt=coff em=linux
154 i386-*-linux*) fmt=elf em=linux ;;
155 i386-*-lynxos*) fmt=coff targ=i386coff
157 i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
159 i386-*-sco*elf*) fmt=elf targ=sco5 ;;
160 i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
161 fmt=coff targ=i386coff ;;
162 i386-*-vsta) fmt=aout ;;
163 i386-*-go32) fmt=coff targ=i386coff ;;
164 i386-*-rtems*) fmt=coff targ=i386coff ;;
165 i386-*-gnu*) fmt=elf ;;
167 fmt=aout em=mach bfd_gas=yes ;;
168 i386-*-msdos*) fmt=aout ;;
169 i386-*-moss*) fmt=elf ;;
170 i386-*-pe) fmt=coff targ=i386coff em=pe ;;
171 i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
172 i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
173 i960-*-bout) fmt=bout ;;
174 i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
175 i960-*-rtems*) fmt=coff em=ic960 targ=ic960coff ;;
176 i960-*-nindy*) fmt=bout ;;
177 i960-*-vxworks4*) fmt=bout ;;
178 i960-*-vxworks5.0) fmt=bout ;;
179 i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
180 i960-*-vxworks*) fmt=bout ;;
182 m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
184 m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
185 m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
186 m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
187 m68k-*-sysv4 | m68k-*-elf) # must be before -sysv*
189 m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
190 fmt=coff targ=m68kcoff ;;
191 m68k-*-hpux*) fmt=hp300 em=hp300 ;;
192 m68k-*-linux*aout*) fmt=aout em=linux ;;
193 m68k-*-linux*) fmt=elf em=linux ;;
194 m68k-*-lynxos*) fmt=coff targ=m68kcoff
196 m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
197 m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
198 m68k-*-psos*) fmt=elf em=psos;;
200 m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
201 m88k-*-coff*) fmt=coff targ=m88kcoff ;;
203 # don't change em like *-*-bsd does
204 mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
205 mips-dec-bsd*) fmt=aout targ=mips-lit ;;
206 mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
207 mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
208 mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
209 mips-*-osf*) fmt=ecoff targ=mips-lit endian=little ;;
210 mips-*-ecoff*) fmt=ecoff
212 big) targ=mips-big ;;
216 mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
217 mips-*-gnu*) fmt=aout
219 big) targ=mips-big ;;
223 mips-*-irix6*) fmt=elf targ=mips-big ;;
224 mips-*-irix5*) fmt=elf targ=mips-big ;;
225 mips-*-irix*) fmt=ecoff targ=mips-big ;;
226 mips-*-riscos*) fmt=ecoff targ=mips-big ;;
227 mips-*-sysv*) fmt=ecoff targ=mips-big ;;
228 mips-*-elf* | mips-*-rtems* | mips-*-linux*)
231 big) targ=mips-big ;;
235 mn10200-*-*) fmt=elf bfd_gas=yes ;;
236 mn10300-*-*) fmt=elf bfd_gas=yes ;;
237 ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
244 ppc-*-aix*) fmt=coff ;;
245 ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
252 ppc-*-linux*) fmt=elf
255 *) AC_MSG_ERROR(Linux must be configured big endian) ;;
258 ppc-*-solaris*) fmt=elf
260 big) AC_MSG_ERROR(Solaris must be configured little endian) ;;
271 ppc-*-macos* | ppc-*-mpw*)
273 ppc-*-netware*) fmt=elf em=ppcnw ;;
275 sh-*-elf*) fmt=elf ;;
276 sh-*-coff*) fmt=coff ;;
278 ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
279 ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
281 sparc-*-rtems*) fmt=aout ;;
282 sparc-*-sunos4*) fmt=aout em=sun3 ;;
283 sparc-*-aout | sparc*-*-vxworks*)
284 fmt=aout em=sparcaout ;;
285 sparc-*-coff) fmt=coff ;;
286 sparc-*-lynxos*) fmt=coff em=lynx ;;
287 sparc-fujitsu-none) fmt=aout ;;
288 sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
290 sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
292 # start-sanitize-tic80
293 tic80-*-coff) fmt=coff targ=tic80coff;;
295 v850-*-*) fmt=elf bfd_gas=yes ;;
297 vax-*-bsd* | vax-*-ultrix*)
299 vax-*-vms) fmt=vms ;;
301 z8k-*-coff | z8k-*-sim)
306 *-*-aout | *-*-scout)
312 *-*-generic) fmt=generic ;;
313 *-*-xray | *-*-hms) fmt=coff ;;
315 *-*-elf | *-*-sysv4* | *-*-solaris*)
316 AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
318 *-*-vxworks) fmt=aout ;;
319 *-*-netware) fmt=elf ;;
322 case ${cpu_type}-${fmt} in
323 alpha-*) bfd_gas=yes ;;
324 arm-*) bfd_gas=yes ;;
326 # i386-aout) bfd_gas=preferred ;;
327 mips-*) bfd_gas=yes ;;
328 ns32k-*) bfd_gas=yes ;;
329 ppc-*) bfd_gas=yes ;;
330 sparc-*) bfd_gas=yes ;;
331 *-elf) bfd_gas=yes ;;
332 *-ecoff) bfd_gas=yes ;;
333 *-som) bfd_gas=yes ;;
337 # Other random stuff.
339 # do we need the opcodes library?
345 if test "${shared_opcodes}" = "true"; then
346 # A shared libopcodes must be linked against libbfd.
352 test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
354 case ${cpu}-${vendor}-${os} in
355 sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
360 case ${extra_objects} in
362 *) extra_objects="$extra_objects m68k-parse.o" ;;
367 # See if we really can support this configuration with the emulation code.
369 if test $this_target = $target ; then
370 primary_bfd_gas=$bfd_gas
375 if test $bfd_gas = no ; then
376 # Can't support other configurations this way.
379 elif test $bfd_gas = no ; then
380 # Can't support this configuration.
384 # From target name and format, produce a list of supported emulations.
386 case ${generic_target}-${fmt} in
387 mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
388 mips-*-*-ecoff) case "$endian" in
389 big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
390 *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
392 mips-*-*-elf) case "$endian" in
393 big) emulation="mipsbelf mipslelf mipself" ;;
394 *) emulation="mipslelf mipsbelf mipself" ;;
398 emulations="$emulations $emulation"
402 # Assign floating point type. Most processors with FP support
403 # IEEE FP. On those that don't support FP at all, usually IEEE
405 case ${target_cpu} in
406 vax | tahoe ) atof=${target_cpu} ;;
410 case "${obj_format}" in
411 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
415 dnl Make sure the desired support files exist.
418 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
419 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
422 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
423 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
426 # and target makefile frag
428 target_frag=${srcdir}/config/${gas_target}.mt
429 if test ! -r ${target_frag}; then
430 target_frag=/dev/null # ick! but subst_file can't be conditionalized
432 AC_SUBST_FILE(target_frag)
434 case ${user_bfd_gas}-${primary_bfd_gas} in
436 # We didn't override user's choice.
439 AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
451 # User specified nothing.
455 # Some COFF configurations want these random other flags set.
456 case ${obj_format} in
458 case ${target_cpu_type} in
459 i386) AC_DEFINE(I386COFF) ;;
460 m68k) AC_DEFINE(M68KCOFF) ;;
461 m88k) AC_DEFINE(M88KCOFF) ;;
466 # Getting this done right is going to be a bitch. Each configuration specified
467 # with --enable-targets=... should be checked for environment, format, cpu, and
470 # For each configuration, the necessary object file support code must be linked
471 # in. This might be only one, it might be up to four. The necessary emulation
472 # code needs to be provided, too.
474 # And then there's "--enable-targets=all"....
476 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
478 formats="${obj_format}"
482 for em in . $emulations ; do
486 fmt=elf file=mipself ;;
487 mipsbecoff | mipslecoff)
488 fmt=ecoff file=mipsecoff ;;
490 formats="$formats $fmt"
491 emfiles="$emfiles e-$file.o"
492 EMULATIONS="$EMULATIONS &$em,"
496 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
497 for fmt in $formats ; do
499 aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
500 bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
501 coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
502 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
503 elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
504 generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
505 hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
506 ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
507 som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
508 vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
510 extra_objects="$extra_objects obj-$fmt.o"
514 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
516 extra_objects="$extra_objects $emfiles"
517 DEFAULT_EMULATION=`set . $emulations ; echo $2`
518 AC_DEFINE(USE_EMULATIONS)
520 AC_SUBST(extra_objects)
521 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
522 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
524 files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
525 config/obj-${obj_format}.h config/obj-${obj_format}.c \
526 config/te-${te_file}.h config/atof-${atof}.c \
528 links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
531 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
532 yes-*-coff) need_bfd=yes ;;
533 no-*-coff) need_bfd=yes
534 AC_DEFINE(MANY_SEGMENTS) ;;
537 reject_dev_configs=yes
539 case ${reject_dev_configs}-${dev} in
541 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
545 AC_SUBST(target_cpu_type)
548 dnl AC_SUBST(emulation)
550 AC_LINK_FILES($files, $links)
552 case "${primary_bfd_gas}" in
553 yes) AC_DEFINE(BFD_ASSEMBLER)
557 # do we need the opcodes library?
558 case "${need_opcodes}" in
560 OPCODES_DEP=../opcodes/libopcodes.a
561 OPCODES_LIB='-L../opcodes -lopcodes'
563 # We need to handle some special cases for shared libraries.
566 # On SunOS, we must link against the name we are going to install,
567 # not -lbfd, since SunOS does not support SONAME.
568 if test "${shared_opcodes}" = "true"; then
569 OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
573 # On Alpha OSF/1, the native linker searches all the -L
574 # directories for any LIB.so files, and only then searches for any
575 # LIB.a files. That means that if there is an installed
576 # libbfd.so, but this build is not done with --enable-shared, the
577 # link will wind up being against the install libbfd.so rather
578 # than the newly built libbfd. To avoid this, we must explicitly
579 # link against libbfd.a when --enable-shared is not used.
580 if test "${shared_opcodes}" != "true"; then
581 OPCODES_LIB='../opcodes/libopcodes.a'
587 AC_SUBST(OPCODES_DEP)
588 AC_SUBST(OPCODES_LIB)
590 case "${need_bfd}" in
592 BFDDEP=../bfd/libbfd.a
593 BFDLIB='-L../bfd -lbfd'
594 ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
596 # We need to handle some special cases for shared libraries
599 # On SunOS, we must link against the name we are going to install,
600 # not -lbfd, since SunOS does not support SONAME.
601 if test "${shared_bfd}" = "true"; then
602 BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
606 # On Alpha OSF/1, the native linker searches all the -L
607 # directories for any LIB.so files, and only then searches for any
608 # LIB.a files. That means that if there is an installed
609 # libbfd.so, but this build is not done with --enable-shared, the
610 # link will wind up being against the install libbfd.so rather
611 # than the newly built libbfd. To avoid this, we must explicitly
612 # link against libbfd.a when --enable-shared is not used.
613 if test "${shared_bfd}" != "true"; then
614 BFDLIB='../bfd/libbfd.a'
622 AC_SUBST(ALL_OBJ_DEPS)
624 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
625 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
626 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
627 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
628 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
633 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
635 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
636 # people who are not cross-compiling but are compiling cross-assemblers.
637 AC_MSG_CHECKING(whether compiling a cross-assembler)
638 if test "${host}" = "${target}"; then
642 AC_DEFINE(CROSS_COMPILE)
644 AC_MSG_RESULT($cross_gas)
646 dnl ansidecl.h will deal with const
651 # VMS doesn't have unlink.
652 AC_CHECK_FUNCS(unlink remove, break)
654 # Some systems don't have sbrk().
657 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
658 # enough, but on some of those systems, the assert macro relies on requoting
662 # On some systems, the system header files may not declare malloc, realloc,
663 # and free. There are places where gas needs these functions to have been
664 # declared -- such as when taking their addresses.
672 #ifdef HAVE_STRINGS_H
683 GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
684 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
685 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
686 GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
688 # Does errno.h declare errno, or do we have to add a separate declaration
690 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
698 RPATH_ENVVAR=LD_LIBRARY_PATH
699 # If we have shared libraries, try to set rpath reasonably.
700 if test "${shared}" = "true"; then
703 HLDFLAGS='-Wl,+s,+b,$(libdir)'
704 RPATH_ENVVAR=SHLIB_PATH
706 *-*-irix5* | *-*-irix6*)
707 HLDFLAGS='-Wl,-rpath,$(libdir)'
712 HLDFLAGS='-Wl,-rpath,$(libdir)'
715 HLDFLAGS='-R $(libdir)'
718 HLDENV='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
723 # On SunOS, if the linker supports the -rpath option, use it to
724 # prevent ../bfd and ../opcodes from being included in the run time
728 echo 'main () { }' > conftest.c
729 ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
730 if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
732 elif grep 'No such file' conftest.t >/dev/null 2>&1; then
734 elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
736 elif test "${shared}" = "true"; then
737 HLDFLAGS='-Wl,-rpath=$(libdir)'
739 HLDFLAGS='-Wl,-rpath='
741 rm -f conftest.t conftest.c conftest
746 AC_SUBST(RPATH_ENVVAR)
748 dnl This must come last.
749 AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)