gas/dwarf2dbg.c

   1 /* dwarf2dbg.c - DWARF2 debug support
   2    Copyright (C) 1999, 2000 Free Software Foundation, Inc.
   3    Contributed by David Mosberger-Tang <davidm@hpl.hp.com>
   4
   5    This file is part of GAS, the GNU Assembler.
   6
   7    GAS is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 2, or (at your option)
  10    any later version.
  11
  12    GAS is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with GAS; see the file COPYING.  If not, write to the Free
  19    Software Foundation, 59 Temple Place - Suite 330, Boston, MA
  20    02111-1307, USA.  */
  21
  22 /* Logical line numbers can be controlled by the compiler via the
  23    following two directives:
  24
  25         .file FILENO "file.c"
  26         .loc  FILENO LINENO [COLUMN]
  27
  28    FILENO is the filenumber.  */
  29
  30 #include "ansidecl.h"
  31
  32 #include "as.h"
  33 #include "dwarf2dbg.h"
  34 #include "subsegs.h"
  35
  36 #include "elf/dwarf2.h"
  37
  38 /* Since we can't generate the prolog until the body is complete, we
  39    use three different subsegments for .debug_line: one holding the
  40    prolog, one for the directory and filename info, and one for the
  41    body ("statement program").  */
  42 #define DL_PROLOG       0
  43 #define DL_FILES        1
  44 #define DL_BODY         2
  45
  46 /* First special line opcde - leave room for the standard opcodes.
  47    Note: If you want to change this, you'll have to update the
  48    "standard_opcode_lengths" table that is emitted below in
  49    dwarf2_finish().  */
  50 #define DWARF2_LINE_OPCODE_BASE         10
  51
  52 #ifndef DWARF2_LINE_BASE
  53   /* Minimum line offset in a special line info. opcode.  This value
  54      was chosen to give a reasonable range of values.  */
  55 # define DWARF2_LINE_BASE               -5
  56 #endif
  57
  58 /* Range of line offsets in a special line info. opcode.  */
  59 #ifndef DWARF2_LINE_RANGE
  60 # define DWARF2_LINE_RANGE              14
  61 #endif
  62
  63 #ifndef DWARF2_LINE_MIN_INSN_LENGTH
  64   /* Define the architecture-dependent minimum instruction length (in
  65      bytes).  This value should be rather too small than too big.  */
  66 # define DWARF2_LINE_MIN_INSN_LENGTH    4
  67 #endif
  68
  69 /* Flag that indicates the initial value of the is_stmt_start flag.
  70    In the present implementation, we do not mark any lines as
  71    the beginning of a source statement, because that information
  72    is not made available by the GCC front-end.  */
  73 #define DWARF2_LINE_DEFAULT_IS_STMT     1
  74
  75 /* Flag that indicates the initial value of the is_stmt_start flag.
  76    In the present implementation, we do not mark any lines as
  77    the beginning of a source statement, because that information
  78    is not made available by the GCC front-end.  */
  79 #define DWARF2_LINE_DEFAULT_IS_STMT     1
  80
  81 /* Given a special op, return the line skip amount.  */
  82 #define SPECIAL_LINE(op) \
  83         (((op) - DWARF2_LINE_OPCODE_BASE)%DWARF2_LINE_RANGE + DWARF2_LINE_BASE)
  84
  85 /* Given a special op, return the address skip amount (in units of
  86    DWARF2_LINE_MIN_INSN_LENGTH.  */
  87 #define SPECIAL_ADDR(op) (((op) - DWARF2_LINE_OPCODE_BASE)/DWARF2_LINE_RANGE)
  88
  89 /* The maximum address skip amount that can be encoded with a special op.  */
  90 #define MAX_SPECIAL_ADDR_DELTA          SPECIAL_ADDR(255)
  91
  92 #define INITIAL_STATE                                           \
  93   /* Initialize as per DWARF2.0 standard.  */                   \
  94   0,                                    /* address */           \
  95   1,                                    /* file */              \
  96   1,                                    /* line */              \
  97   0,                                    /* column */            \
  98   DWARF2_LINE_DEFAULT_IS_STMT,          /* is_stmt */           \
  99   0,                                    /* basic_block */       \
 100   1                                     /* empty_sequence */
 101
 102 static struct {
 103     /* state machine state as per DWARF2 manual: */
 104     struct dwarf2_sm {
 105         addressT addr;
 106         unsigned int filenum;
 107         unsigned int line;
 108         unsigned int column;
 109         unsigned int
 110           is_stmt : 1,
 111           basic_block : 1,
 112           empty_sequence : 1;           /* current code sequence has no DWARF2 directives? */
 113     } sm;
 114
 115     unsigned int
 116       any_dwarf2_directives : 1;        /* did we emit any DWARF2 line debug directives? */
 117
 118     fragS * frag;       /* frag that "addr" is relative to */
 119     segT text_seg;      /* text segment "addr" is relative to */
 120     subsegT text_subseg;
 121     segT line_seg;      /* ".debug_line" segment */
 122     int last_filename;  /* index of last filename that was used */
 123     int num_filenames;  /* index of last filename in use */
 124     int filename_len;   /* length of the filename array */
 125     struct {
 126         int dir;        /* valid after gen_dir_list() only */
 127         char *name; /* full path before gen_dir_list(), filename afterwards */
 128     } *file;
 129
 130     struct dwarf2_line_info current;    /* current source info */
 131
 132     /* counters for statistical purposes */
 133     unsigned int num_line_entries;
 134     unsigned int opcode_hist[256];      /* histogram of opcode frequencies */
 135 } ls = {
 136     {
 137       INITIAL_STATE
 138     },
 139     0,
 140     0,
 141     0,
 142     0,
 143     0,
 144     0,
 145     0,
 146     0,
 147     NULL,
 148     { NULL, 0, 0, 0, 0 },
 149     0,
 150     {
 151       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 152       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 153       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 154       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 155       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 156       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 157       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 158       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 159       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 160       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 161       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 162       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 163       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 164       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 165       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 166       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
 167     }
 168 };
 169
 170 /* Function prototypes.  */
 171 static void out_uleb128 PARAMS ((addressT));
 172 static void out_sleb128 PARAMS ((offsetT));
 173 static void gen_addr_line PARAMS ((int, addressT));
 174 static void reset_state_machine PARAMS ((void));
 175 static void out_set_addr PARAMS ((addressT));
 176 static void out_end_sequence PARAMS ((void));
 177 static int get_filenum PARAMS ((int, char *));
 178 static void gen_dir_list PARAMS ((void));
 179 static void gen_file_list PARAMS ((void));
 180 static void print_stats PARAMS ((unsigned long));
 181
 182 #define out_byte(byte)  FRAG_APPEND_1_CHAR(byte)
 183 #define out_opcode(opc) (out_byte ((opc)), ++ls.opcode_hist[(opc) & 0xff])
 184
 185 /* Output an unsigned "little-endian base 128" number.  */
 186
 187 static void
 188 out_uleb128 (value)
 189      addressT value;
 190 {
 191   unsigned char byte, more = 0x80;
 192
 193   do
 194     {
 195       byte = value & 0x7f;
 196       value >>= 7;
 197       if (value == 0)
 198         more = 0;
 199       out_byte (more | byte);
 200     }
 201   while (more);
 202 }
 203
 204 /* Output a signed "little-endian base 128" number.  */
 205
 206 static void
 207 out_sleb128 (value)
 208      offsetT value;
 209 {
 210   unsigned char byte, more = 0x80;
 211
 212   do
 213     {
 214       byte = value & 0x7f;
 215       value >>= 7;
 216       if (((value == 0) && ((byte & 0x40) == 0))
 217           || ((value == -1) && ((byte & 0x40) != 0)))
 218         more = 0;
 219       out_byte (more | byte);
 220     }
 221   while (more);
 222 }
 223
 224 /* Encode a pair of line and address skips as efficiently as possible.
 225    Note that the line skip is signed, whereas the address skip is
 226    unsigned.  */
 227
 228 static void
 229 gen_addr_line (line_delta, addr_delta)
 230      int line_delta;
 231      addressT addr_delta;
 232 {
 233   unsigned int tmp, opcode;
 234
 235   tmp = line_delta - DWARF2_LINE_BASE;
 236
 237   if (tmp >= DWARF2_LINE_RANGE)
 238     {
 239       out_opcode (DW_LNS_advance_line);
 240       out_sleb128 (line_delta);
 241       tmp = 0 - DWARF2_LINE_BASE;
 242       line_delta = 0;
 243     }
 244
 245   tmp += DWARF2_LINE_OPCODE_BASE;
 246
 247   /* Try using a special opcode.  */
 248   opcode = tmp + addr_delta * DWARF2_LINE_RANGE;
 249   if (opcode <= 255)
 250     {
 251       out_opcode (opcode);
 252       return;
 253     }
 254
 255   /* Try using DW_LNS_const_add_pc followed by special op.  */
 256   opcode = tmp + (addr_delta - MAX_SPECIAL_ADDR_DELTA) * DWARF2_LINE_RANGE;
 257   if (opcode <= 255)
 258     {
 259       out_opcode (DW_LNS_const_add_pc);
 260       out_opcode (opcode);
 261       return;
 262     }
 263
 264   out_opcode (DW_LNS_advance_pc);
 265   out_uleb128 (addr_delta);
 266
 267   if (line_delta)
 268     /* Output line-delta.  */
 269     out_opcode (tmp);
 270   else
 271     /* Append new row with current info.  */
 272     out_opcode (DW_LNS_copy);
 273 }
 274
 275 static void
 276 reset_state_machine ()
 277 {
 278   static const struct dwarf2_sm initial_state = { INITIAL_STATE };
 279
 280   ls.sm = initial_state;
 281 }
 282
 283 /* Set an absolute address (may results in a relocation entry).  */
 284
 285 static void
 286 out_set_addr (addr)
 287      addressT addr;
 288 {
 289   subsegT saved_subseg;
 290   segT saved_seg;
 291   expressionS expr;
 292   symbolS *sym;
 293   int bytes_per_address;
 294
 295   saved_seg = now_seg;
 296   saved_subseg = now_subseg;
 297
 298   subseg_set (ls.text_seg, ls.text_subseg);
 299   sym = symbol_new (".L0\001", now_seg, addr, frag_now);
 300
 301   subseg_set (saved_seg, saved_subseg);
 302
 303 #ifdef BFD_ASSEMBLER
 304   bytes_per_address = bfd_arch_bits_per_address (stdoutput) / 8;
 305 #else
 306   /* FIXME.  */
 307   bytes_per_address = 4;
 308 #endif
 309
 310   out_opcode (DW_LNS_extended_op);
 311   out_uleb128 (bytes_per_address + 1);
 312
 313   out_opcode (DW_LNE_set_address);
 314   expr.X_op = O_symbol;
 315   expr.X_add_symbol = sym;
 316   expr.X_add_number = 0;
 317   emit_expr (&expr, bytes_per_address);
 318 }
 319
 320 /* Emit DW_LNS_end_sequence and reset state machine.  Does not
 321    preserve the current segment/sub-segment!  */
 322
 323 static void
 324 out_end_sequence ()
 325 {
 326   addressT addr, delta;
 327   fragS *text_frag;
 328
 329   if (ls.text_seg)
 330     {
 331       subseg_set (ls.text_seg, ls.text_subseg);
 332 #ifdef md_current_text_addr
 333       addr = md_current_text_addr ();
 334 #else
 335       addr = frag_now_fix ();
 336 #endif
 337       text_frag = frag_now;
 338       subseg_set (ls.line_seg, DL_BODY);
 339       if (text_frag != ls.frag)
 340         {
 341           out_set_addr (addr);
 342           ls.sm.addr = addr;
 343           ls.frag = text_frag;
 344         }
 345       else
 346         {
 347           delta = (addr - ls.sm.addr) / DWARF2_LINE_MIN_INSN_LENGTH;
 348           if (delta > 0)
 349             {
 350               /* Advance address without updating the line-debug
 351                  matrix---the end_sequence entry is used only to tell
 352                  the debugger the end of the sequence.  */
 353               out_opcode (DW_LNS_advance_pc);
 354               out_uleb128 (delta);
 355             }
 356         }
 357     }
 358   else
 359     subseg_set (ls.line_seg, DL_BODY);
 360
 361   out_opcode (DW_LNS_extended_op);
 362   out_uleb128 (1);
 363   out_byte (DW_LNE_end_sequence);
 364
 365   reset_state_machine ();
 366 }
 367
 368 /* Look up a filenumber either by filename or by filenumber.  If both
 369    a filenumber and a filename are specified, lookup by filename takes
 370    precedence.  If the filename cannot be found, it is added to the
 371    filetable and the filenumber for the new entry is returned.  */
 372
 373 static int
 374 get_filenum (filenum, file)
 375      int filenum;
 376      char *file;
 377 {
 378   int i, last = filenum - 1;
 379   char char0 = file[0];
 380
 381   /* If filenum is out of range of the filename table, then try using the
 382      table entry returned from the previous call.  */
 383   if (last >= ls.num_filenames || last < 0)
 384     last = ls.last_filename;
 385
 386   /* Do a quick check against the specified or previously used filenum.  */
 387   if (ls.num_filenames > 0 && ls.file[last].name[0] == char0
 388       && strcmp (ls.file[last].name + 1, file + 1) == 0)
 389     return last + 1;
 390
 391   /* No match, fall back to simple linear scan.  */
 392   for (i = 0; i < ls.num_filenames; ++i)
 393     {
 394       if (ls.file[i].name[0] == char0
 395           && strcmp (ls.file[i].name + 1, file + 1) == 0)
 396         {
 397           ls.last_filename = i;
 398           return i + 1;
 399         }
 400     }
 401
 402   /* No match, enter new filename.  */
 403   if (ls.num_filenames >= ls.filename_len)
 404     {
 405       ls.filename_len += 13;
 406       ls.file = xrealloc (ls.file, ls.filename_len * sizeof (ls.file[0]));
 407     }
 408   ls.file[ls.num_filenames].dir = 0;
 409   ls.file[ls.num_filenames].name = file;
 410   ls.last_filename = ls.num_filenames;
 411   return ++ls.num_filenames;
 412 }
 413
 414 /* Emit an entry in the line number table if the address or line has changed.
 415    ADDR is relative to the current frag in the text section.  */
 416
 417 void
 418 dwarf2_gen_line_info (addr, l)
 419      addressT addr;
 420      struct dwarf2_line_info *l;
 421 {
 422   unsigned int filenum = l->filenum;
 423   unsigned int any_output = 0;
 424   subsegT saved_subseg;
 425   segT saved_seg;
 426   fragS *saved_frag;
 427
 428   if (flag_debug)
 429     fprintf (stderr, "line: addr %lx file `%s' line %u col %u flags %x\n",
 430              (unsigned long) addr, l->filename, l->line, l->column, l->flags);
 431
 432   if (filenum > 0 && !l->filename)
 433     {
 434       if (filenum >= (unsigned int) ls.num_filenames)
 435         {
 436           as_warn ("Encountered bad file number in line number debug info!");
 437           return;
 438         }
 439     }
 440   else if (l->filename)
 441     filenum = get_filenum (filenum, l->filename);
 442   else
 443     /* No filename, no filnum => no play.  */
 444     return;
 445
 446   /* Must save these before the subseg_new call, as that call will change
 447      them.  */
 448   saved_seg = now_seg;
 449   saved_subseg = now_subseg;
 450   saved_frag = frag_now;
 451
 452   if (!ls.line_seg)
 453     {
 454 #ifdef BFD_ASSEMBLER
 455       symbolS *secsym;
 456 #endif
 457
 458       ls.line_seg = subseg_new (".debug_line", 0);
 459
 460 #ifdef BFD_ASSEMBLER
 461       bfd_set_section_flags (stdoutput, ls.line_seg, SEC_READONLY);
 462
 463       /* We're going to need this symbol.  */
 464       secsym = symbol_find (".debug_line");
 465       if (secsym != NULL)
 466         symbol_set_bfdsym (secsym, ls.line_seg->symbol);
 467       else
 468         symbol_table_insert (section_symbol (ls.line_seg));
 469 #endif
 470     }
 471
 472   subseg_set (ls.line_seg, DL_BODY);
 473
 474   if (ls.text_seg != saved_seg || ls.text_subseg != saved_subseg)
 475     {
 476       if (!ls.sm.empty_sequence)
 477         {
 478           /* Terminate previous sequence.  */
 479           out_end_sequence ();
 480           ls.sm.empty_sequence = 1;
 481         }
 482       any_output = 1;
 483       ls.text_seg = saved_seg;
 484       ls.text_subseg = saved_subseg;
 485       out_set_addr (addr);
 486       ls.sm.addr = addr;
 487       ls.frag = saved_frag;
 488     }
 489
 490   if (ls.sm.filenum != filenum)
 491     {
 492       any_output = 1;
 493       out_opcode (DW_LNS_set_file);
 494       out_uleb128 (filenum);
 495       ls.sm.filenum = filenum;
 496     }
 497
 498   if (ls.sm.column != l->column)
 499     {
 500       any_output = 1;
 501       out_opcode (DW_LNS_set_column);
 502       out_uleb128 (l->column);
 503       ls.sm.column = l->column;
 504     }
 505
 506   if (((l->flags & DWARF2_FLAG_BEGIN_STMT) != 0) != ls.sm.is_stmt)
 507     {
 508       any_output = 1;
 509       out_opcode (DW_LNS_negate_stmt);
 510     }
 511
 512   if (l->flags & DWARF2_FLAG_BEGIN_BLOCK)
 513     {
 514       any_output = 1;
 515       out_opcode (DW_LNS_set_basic_block);
 516     }
 517
 518   if (ls.sm.line != l->line)
 519     {
 520       any_output = 1;
 521       if (saved_frag != ls.frag)
 522         {
 523           /* If a new frag got allocated (for whatever reason), then
 524              deal with it by generating a reference symbol.  Note: no
 525              end_sequence needs to be generated because the address did
 526              not really decrease (only the reference point changed).  */
 527           out_set_addr (addr);
 528           ls.sm.addr = addr;
 529           ls.frag = saved_frag;
 530         }
 531       gen_addr_line (l->line - ls.sm.line,
 532                      (addr - ls.sm.addr) / DWARF2_LINE_MIN_INSN_LENGTH);
 533       ls.sm.basic_block = 0;
 534       ls.sm.line = l->line;
 535       ls.sm.addr = addr;
 536     }
 537
 538   subseg_set (saved_seg, saved_subseg);
 539
 540   ls.num_line_entries += any_output;
 541   if (any_output)
 542     ls.sm.empty_sequence = 0;
 543 }
 544
 545 static void
 546 gen_dir_list ()
 547 {
 548   char *str, *slash, *dir_list, *dp, *cp;
 549   int i, j, num_dirs;
 550
 551   dir_list = frag_more (0);
 552   num_dirs = 0;
 553
 554   for (i = 0; i < ls.num_filenames; ++i)
 555     {
 556       str = ls.file[i].name;
 557       slash = strrchr (str, '/');
 558       if (slash)
 559         {
 560           *slash = '\0';
 561           for (j = 0, dp = dir_list; j < num_dirs; ++j)
 562             {
 563               if (strcmp (str, dp) == 0)
 564                 {
 565                   ls.file[i].dir = j + 1;
 566                   break;
 567                 }
 568               dp += strlen (dp);
 569             }
 570           if (j >= num_dirs)
 571             {
 572               /* Didn't find this directory: append it to the list.  */
 573               size_t size = strlen (str) + 1;
 574               cp = frag_more (size);
 575               memcpy (cp, str, size);
 576               ls.file[i].dir = ++num_dirs;
 577             }
 578           *slash = '/';
 579           ls.file[i].name = slash + 1;
 580         }
 581     }
 582
 583   /* Terminate directory list.  */
 584   out_byte ('\0');
 585 }
 586
 587 static void
 588 gen_file_list ()
 589 {
 590   size_t size;
 591   char *cp;
 592   int i;
 593
 594   for (i = 0; i < ls.num_filenames; ++i)
 595     {
 596       size = strlen (ls.file[i].name) + 1;
 597       cp = frag_more (size);
 598       memcpy (cp, ls.file[i].name, size);
 599
 600       out_uleb128 (ls.file[i].dir);     /* directory number */
 601       out_uleb128 (0);                  /* last modification timestamp */
 602       out_uleb128 (0);                  /* filesize */
 603     }
 604
 605   /* Terminate filename list.  */
 606   out_byte (0);
 607 }
 608
 609 static void
 610 print_stats (total_size)
 611      unsigned long total_size;
 612 {
 613   static const char *opc_name[] = {
 614     "extended", "copy", "advance_pc", "advance_line", "set_file",
 615     "set_column", "negate_stmt", "set_basic_block", "const_add_pc",
 616     "fixed_advance_pc"
 617   };
 618   size_t i;
 619   int j;
 620
 621   fprintf (stderr, "Average size: %g bytes/line\n",
 622            total_size / (double) ls.num_line_entries);
 623
 624   fprintf (stderr, "\nStandard opcode histogram:\n");
 625
 626   for (i = 0; i < sizeof (opc_name) / sizeof (opc_name[0]); ++i)
 627     {
 628       fprintf (stderr, "%s", opc_name[i]);
 629       for (j = strlen (opc_name[i]); j < 16; ++j)
 630         fprintf (stderr, " ");
 631       fprintf (stderr, ": %u\n", ls.opcode_hist[i]);
 632     }
 633
 634   fprintf (stderr, "\nSpecial opcodes:\naddr\t\t\t\tline skip\n");
 635
 636   fprintf (stderr, "skip: ");
 637   for (j = DWARF2_LINE_BASE; j < DWARF2_LINE_BASE + DWARF2_LINE_RANGE; ++j)
 638     fprintf (stderr, "%3d", j);
 639   fprintf (stderr, "\n-----");
 640
 641   for (; i < 256; ++i)
 642     {
 643       j = SPECIAL_LINE (i);
 644       if (j == DWARF2_LINE_BASE)
 645         fprintf (stderr, "\n%4u: ",
 646                  ((unsigned int)
 647                   DWARF2_LINE_MIN_INSN_LENGTH * SPECIAL_ADDR (i)));
 648       fprintf (stderr, " %2u", ls.opcode_hist[i]);
 649     }
 650   fprintf (stderr, "\n");
 651 }
 652
 653 void
 654 dwarf2_finish ()
 655 {
 656   addressT body_size, total_size, prolog_size;
 657   subsegT saved_subseg;
 658   segT saved_seg;
 659   char *cp;
 660
 661   if (!ls.line_seg)
 662     /* No .debug_line segment, no work to do.  */
 663     return;
 664
 665   saved_seg = now_seg;
 666   saved_subseg = now_subseg;
 667
 668   if (!ls.sm.empty_sequence)
 669     out_end_sequence ();
 670   total_size = body_size = frag_now_fix ();
 671
 672   /* Now generate the directory and file lists.  */
 673   subseg_set (ls.line_seg, DL_FILES);
 674   gen_dir_list ();
 675   gen_file_list ();
 676   total_size += frag_now_fix ();
 677
 678   /* And now the header ("statement program prolog", in DWARF2 lingo...).  */
 679   subseg_set (ls.line_seg, DL_PROLOG);
 680
 681   cp = frag_more (15 + DWARF2_LINE_OPCODE_BASE - 1);
 682
 683   total_size += frag_now_fix ();
 684   prolog_size = total_size - body_size - 10;
 685
 686 # define STUFF(val,size)        md_number_to_chars (cp, val, size); cp += size;
 687   STUFF (total_size - 4, 4);    /* length */
 688   STUFF (2, 2);                 /* version */
 689   STUFF (prolog_size, 4);       /* prologue_length */
 690   STUFF (DWARF2_LINE_MIN_INSN_LENGTH, 1);
 691   STUFF (DWARF2_LINE_DEFAULT_IS_STMT, 1);
 692   STUFF (DWARF2_LINE_BASE, 1);
 693   STUFF (DWARF2_LINE_RANGE, 1);
 694   STUFF (DWARF2_LINE_OPCODE_BASE, 1);
 695
 696   /* standard_opcode_lengths: */
 697   STUFF (0, 1);                 /* DW_LNS_copy */
 698   STUFF (1, 1);                 /* DW_LNS_advance_pc */
 699   STUFF (1, 1);                 /* DW_LNS_advance_line */
 700   STUFF (1, 1);                 /* DW_LNS_set_file */
 701   STUFF (1, 1);                 /* DW_LNS_set_column */
 702   STUFF (0, 1);                 /* DW_LNS_negate_stmt */
 703   STUFF (0, 1);                 /* DW_LNS_set_basic_block */
 704   STUFF (0, 1);                 /* DW_LNS_const_add_pc */
 705   STUFF (1, 1);                 /* DW_LNS_fixed_advance_pc */
 706
 707   subseg_set (saved_seg, saved_subseg);
 708
 709   if (flag_debug)
 710     print_stats (total_size);
 711 }
 712
 713 void
 714 dwarf2_directive_file (dummy)
 715      int dummy ATTRIBUTE_UNUSED;
 716 {
 717   int len;
 718
 719   /* Continue to accept a bare string and pass it off.  */
 720   SKIP_WHITESPACE ();
 721   if (*input_line_pointer == '"')
 722     {
 723       s_app_file (0);
 724       return;
 725     }
 726
 727   ls.any_dwarf2_directives = 1;
 728
 729   if (debug_type == DEBUG_NONE)
 730     /* Automatically turn on DWARF2 debug info unless something else
 731        has been selected.  */
 732     debug_type = DEBUG_DWARF2;
 733
 734   ls.current.filenum = get_absolute_expression ();
 735   ls.current.filename = demand_copy_C_string (&len);
 736
 737   demand_empty_rest_of_line ();
 738 }
 739
 740 void
 741 dwarf2_directive_loc (dummy)
 742      int dummy ATTRIBUTE_UNUSED;
 743 {
 744   ls.any_dwarf2_directives = 1;
 745
 746   ls.current.filenum = get_absolute_expression ();
 747   SKIP_WHITESPACE ();
 748   ls.current.line = get_absolute_expression ();
 749   SKIP_WHITESPACE ();
 750   ls.current.column = get_absolute_expression ();
 751   demand_empty_rest_of_line ();
 752
 753   ls.current.flags = DWARF2_FLAG_BEGIN_STMT;
 754
 755 #ifndef NO_LISTING
 756   if (listing)
 757     listing_source_line (ls.current.line);
 758 #endif
 759 }
 760
 761 void
 762 dwarf2_where (line)
 763      struct dwarf2_line_info *line;
 764 {
 765   if (ls.any_dwarf2_directives)
 766     *line = ls.current;
 767   else
 768     {
 769       as_where (&line->filename, &line->line);
 770       line->filenum = 0;
 771       line->column = 0;
 772       line->flags = DWARF2_FLAG_BEGIN_STMT;
 773     }
 774 }
 775
 776 /* Generate a DWARF2 line statement for an
 777    instruction of SIZE bytes in length.  */
 778
 779 void
 780 dwarf2_generate_asm_lineno (size)
 781      int size;
 782 {
 783   bfd_vma addr;
 784   static struct dwarf2_line_info debug_line;
 785
 786   /* First update the notion of the current source line.  */
 787   dwarf2_where (& debug_line);
 788
 789   /* We want the offset of the start of this
 790      instruction within the the current frag.  */
 791   addr = frag_now->fr_address + frag_now_fix () - size;
 792
 793   /* And record the information.  */
 794   dwarf2_gen_line_info (addr, & debug_line);
 795 }
 796