gas/testsuite/gas/all/gas.exp

   1 # Copyright 2012
   2 # Free Software Foundation, Inc.
   3
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 3 of the License, or
   7 # (at your option) any later version.
   8 #
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program; if not, write to the Free Software
  16 # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
  17
  18 #
  19 # These tests should be valid on all targets.
  20 #
  21
  22 # I think currently all targets fail this one when listings are enabled.
  23 gas_test "p2425.s" ""   "" "pcrel values in assignment"
  24
  25 # p1480.s uses a ".space" directive which for most assemblers means
  26 # "allocate some space".  On the PA it means "switch into this space".
  27 #
  28 # Therefore this test (as it is currently written) is completely bogus
  29 # for any PA target.  Do not bother trying to run it and just claim
  30 # it fails.
  31 #
  32 # The C54x uses ".space" to allocate bits, and requires absolute expressions;
  33 # The ".space" directive is taken care of in the C54x-specific tests, so fail
  34 #  here
  35 #
  36 # The test also doesn't work on mep targets, since they use RELC, and it
  37 # will avoid simplifying the expression since it conservatively assumes
  38 # ugly expressions can be saved until link-time.
  39 if { [istarget hppa*-*-*] || [istarget *c54x*-*-*] || [istarget mep*-*-*]} then {
  40     setup_xfail *-*-*
  41     fail "simplifiable double subtraction"
  42 } else {
  43     gas_test "p1480.s" "" "-a>" "simplifiable double subtraction"
  44 }
  45
  46 # No floating point support in assembly code for CRIS and Z80.
  47 if { ![istarget cris-*-*] && ![istarget crisv32-*-*]
  48      && ![istarget z80-*-*] } then {
  49     gas_test "float.s" ""   "" "simple FP constants"
  50 }
  51
  52 # This test is meaningless for the PA; the difference of two undefined
  53 # symbols is something that is (and must be) supported on the PA.
  54 # The same is true for alpha-vms
  55 #
  56 # The MN10300 port supports link time relaxation which in turn allows
  57 # for link time resolution of the differneces of two symbols which are
  58 # undefined at assembly time.  Hence this test will not pass for the
  59 # MN10300.  The same thing is true for the RX port as well.
  60 if { ![istarget hppa*-*-*]
  61      && ![istarget alpha*-*-*vms*]
  62      && ![istarget rx-*-*]
  63      && ![istarget mn10300-*-*]
  64      && ![istarget am3*-*-*] } then {
  65     gas_test_error "diff1.s" "" "difference of two undefined symbols"
  66 }
  67
  68 gas_test_error "equiv1.s" "" ".equiv for symbol already set to another one"
  69 gas_test_error "equiv2.s" "" ".equiv for symbol already set to an expression"
  70
  71 # .equ works differently on some targets.
  72 case $target_triplet in {
  73     { hppa*-*-* } { }
  74     { *c54x*-*-* } { }
  75     default {
  76         gas_test "equ-ok.s" "" "" ".equ for symbol already set"
  77         gas_test_error "equ-bad.s" "" ".equ for symbol already set through .eqv"
  78     }
  79 }
  80
  81 gas_test "eqv-ok.s" "" "" ".eqv support"
  82 gas_test_error "eqv-bad.s" "" ".eqv for symbol already set"
  83
  84 if { ![istarget "bfin-*-*"] } then {
  85     gas_test "assign-ok.s" "" "" "== assignment support"
  86 }
  87 gas_test_error "assign-bad.s" "" "== assignment for symbol already set"
  88
  89 # .equ works differently on some targets.
  90 # linkrelax-ing prevents most forward references from working.
  91 case $target_triplet in {
  92     { *c54x*-*-* } { }
  93     { cr16*-*-* } { }
  94     { crx*-*-* } { }
  95     { h8300*-*-* } { }
  96     { hppa*-*-* } { }
  97     { mep-*-* } { }
  98     { mn10\[23\]00*-*-* } { }
  99     default {
 100         # Some targets don't manage to resolve BFD_RELOC_8 for constants.
 101         setup_xfail "alpha*-*-*" "*c30*-*-*" "*c4x*-*-*" \
 102             "d\[13\]0v*-*-*" "i860-*-*" "mips*-*-*" "msp430-*-*" \
 103             "pdp11-*-*" "xtensa*-*-*"
 104         run_dump_test forward
 105     }
 106 }
 107
 108 # aout relocs are often weird, so is mep and mips-ecoff. don't bother testing
 109 # som doesn't use a .text section
 110 # mmix doesn't like .L1:
 111 # ti addresses aren't octets.
 112 if { ![is_aout_format] } {
 113     case $target_triplet in {
 114         { hppa*64*-*-* } {
 115             run_dump_test fwdexp
 116         }
 117         { hppa*-*-hpux* } { }
 118         { mep-*-* } { }
 119         { mips*-*-ecoff* } { }
 120         { mmix-*-* } { }
 121         { tic30*-*-* } { }
 122         { tic4x*-*-* } { }
 123         { tic54x*-*-* } { }
 124         default {
 125             run_dump_test fwdexp
 126         }
 127     }
 128 }
 129
 130 # .set works differently on some targets.
 131 # most of the tests won't work on targets that set linkrelax.
 132 # 4 octet bytes confuse address matching on ti targets.
 133 # pdp11 gets unexpected reloc types.
 134 case $target_triplet in {
 135     { alpha*-*-* } { }
 136     { cr16*-*-* } { }
 137     { crx*-*-* } { }
 138     { h8300-*-* } { }
 139     { mips*-*-* } { }
 140     { mn10200-*-* } { }
 141     { mn10300-*-* } { }
 142     { pdp11-*-* } { }
 143     { tic30*-*-* } { }
 144     { tic4x*-*-* } { }
 145     { tic54x*-*-* } { }
 146     { xtensa*-*-* } { }
 147     { z80-*-* } { }
 148     default {
 149         run_dump_test redef
 150         # These targets fail redef2 because they disallow redefined
 151         # symbols on relocs.
 152         setup_xfail "m68hc1*-*-*" "m6811-*-*" "m6812-*-*"
 153         setup_xfail "rx-*-*" "vax*-*-*" "xgate*-*-*" "z8k-*-*"
 154         run_dump_test redef2
 155         setup_xfail "m68hc1*-*-*" "m6811-*-*" "m6812-*-*"
 156         setup_xfail "rx-*-*" "vax*-*-*" "xgate*-*-*" "z8k-*-*"
 157         # rs6000-aix disallows redefinition via .comm.
 158         setup_xfail "*-*-aix*"
 159         # SOM uses a different syntax for .comm
 160         setup_xfail "hppa*-*-hpux*"
 161         # These targets fail redef3 because section contents for the
 162         # word referencing the .comm sym is not zero and/or its reloc
 163         # has a non-zero addend.  Relaxing the test would hide real
 164         # failures such as or32-elf.
 165         setup_xfail "bfin-*-*" "i\[3-7\]86-*-*coff" \
 166             "i\[3-7\]86-*-*pe" "i\[3-7\]86-*-go32*" \
 167             "i\[3-7\]86-*-cygwin*" "i\[3-7\]86-*-mingw*" "x86_64-*-mingw*"
 168         run_dump_test redef3
 169         gas_test_error "redef4.s" "" ".set for symbol already used as label"
 170         gas_test_error "redef5.s" "" ".set for symbol already defined through .comm"
 171     }
 172 }
 173
 174 proc do_comment {} {
 175     set testname "comment.s: comments in listings"
 176     set x1 0
 177     set x2 0
 178     set x3 0
 179     set white {[ \t]*}
 180     gas_start "comment.s" "-al"
 181     while 1 {
 182 # Apparently CRLF is received when using ptys for subprocesses; hence the
 183 # \r\n for line 3.
 184         expect {
 185             -re "^ +1\[ \t\]+# This\[^\n\]*\n"          { set x1 1 }
 186             -re "^ +2\[ \t\]+# correctly\[^\n\]*\n"     { set x2 1 }
 187             -re "^ +3\[ \t\]+/. C comments too. ./\r?\r?\n" { set x3 1 }
 188             -re "\[^\n\]*\n"                            { }
 189             timeout                             { perror "timeout\n"; break }
 190             eof                                 { break }
 191         }
 192     }
 193     gas_finish
 194     if [all_ones $x1 $x2 $x3] then { pass $testname } else { fail $testname }
 195 }
 196
 197 # m32c pads out sections, even empty ones.
 198 case $target_triplet in {
 199     { m32c-*-* } { }
 200     default {
 201         do_comment
 202     }
 203 }
 204
 205 # This test checks the output of the -ag switch. It must detect at least
 206 # the name of the input file, output file, and options passed.
 207 proc general_info_section {} {
 208     set testname "general info section in listings"
 209     set x1 0
 210     set x2 0
 211     set x3 0
 212     set white {[ \t]*}
 213     gas_start "comment.s" "-agn"
 214     while 1 {
 215         expect {
 216             -re "^ \[^\n\]*\t: .*\-agn\[^\n\]*\n"                { set x1 1 }
 217             -re "^ \[^\n\]*\t: \[^\n\]*comment\.s\[^\n\]*\n"   { set x2 1 }
 218             -re "^ \[^\n\]*\t: a\.out\[^\n\]*\n"               { set x3 1 }
 219             -re "\[^\n\]*\n"     { }
 220             timeout              { perror "timeout\n"; break }
 221             eof                  { break }
 222         }
 223     }
 224     gas_finish
 225     if [all_ones $x1 $x2 $x3] then { pass $testname } else { fail $testname }
 226 }
 227
 228 general_info_section
 229
 230 #
 231 # Test x930509a -- correct assembly of differences involving forward
 232 # references.
 233 #
 234
 235 proc do_930509a {} {
 236     set testname "difference between forward references"
 237     set x 0
 238     gas_start "x930509.s" "-al"
 239     while 1 {
 240 # We need to accomodate both byte orders here.
 241 # If ".long" means an 8-byte value on some target someday, this test will have
 242 # to be fixed.
 243         expect {
 244             -re "^ +1 .... 00 ?00 ?00 ?00" { fail $testname; set x 1 }
 245             -re "^ +1 .... 04 ?00 ?00 ?00" { pass $testname; set x 1 }
 246             -re "^ +1 .... 00 ?00 ?00 ?04" { pass $testname; set x 1 }
 247             -re "\[^\n\]*\n" { }
 248             timeout { perror "timeout\n"; break }
 249             eof { break }
 250         }
 251     }
 252     gas_finish
 253     if !$x then { fail $testname }
 254 }
 255
 256 # This test is meaningless for the PA and CR16/CRX: the difference of two
 257 # symbols cannot be resolved by the assembler.
 258 # C54x assembler (for compatibility) does not allow differences between
 259 # forward references.
 260 # C30 counts a four byte offset as a difference of one.
 261 if { ![istarget hppa*-*-*] &&
 262      ![istarget cr16*-*-*] &&
 263      ![istarget  crx*-*-*] &&
 264      ![istarget *c30*-*-*] &&
 265      ![istarget *c4x*-*-*] &&
 266      ![istarget *c54x*-*-*] } then {
 267     # the vax fails because VMS can apparently actually handle this
 268     # case in relocs, so gas doesn't handle it itself.
 269     # mn10300 emits two relocs to handle the difference of two symbols.
 270     setup_xfail "mn10300*-*-*" "vax*-*-vms*"
 271     do_930509a
 272 }
 273
 274 # ".struct" and ".align" have different meanings on c54x
 275 # These directives are done in the c54x-specific tests instead
 276 case $target_triplet in {
 277     { hppa*-*-* } { }
 278     { *c4x*-*-* } { }
 279     { *c54x*-*-* } { }
 280     default {
 281         run_dump_test struct
 282         run_dump_test align
 283         run_dump_test align2
 284     }
 285 }
 286
 287 # '<' and '>' appear to have special meanings on the excluded targets
 288 case $target_triplet in {
 289     { frv-*-* } { }
 290     { hppa*-*-* } { }
 291     { m32r-*-* } { }
 292     { mmix-*-* } { }
 293     { *c4x*-*-* } { }
 294     { *c54x*-*-* } { }
 295     { bfin-*-* } { }
 296     default {
 297         run_dump_test altmacro
 298         # The second test is valid only when '!' is not a comment
 299         # character (it is allowed to be a line comment character).
 300         if [string match "" [lindex [gas_run excl.s "-o /dev/null" ""] 0]] {
 301             run_dump_test altmac2
 302             # Similarly this test does not work when ! is a line seperator.
 303             run_dump_test eval
 304         }
 305     }
 306 }
 307
 308 # This test is for any COFF target.
 309 # We omit the ARM toolchains because they define locals to
 310 #  start with '.', which eliminates .eos, .text etc from the output.
 311 # Omit c54x, since .tag and .def mean something different on that target
 312 if {   ([istarget *-*-coff*] && ![istarget arm*-*-coff] && ![istarget *c4x*-*-coff] && ![istarget *c54x*-*-coff]) \
 313      ||([istarget *-*-pe*] && ![istarget arm*-*-pe*]) \
 314      || [istarget i*86-*-aix*] \
 315      || [istarget i*86-*-sco*] \
 316      || [istarget i*86-*-isc*] \
 317      || [istarget i*86-*-go32*] \
 318      || [istarget i*86-*-cygwin*] \
 319      || [istarget x86_64-*-mingw*] \
 320      || [istarget i*86-*-*nt] \
 321      || [istarget i*86-*-interix*] \
 322      || ([istarget i960-*-vxworks5.*] && ![istarget i960-*-vxworks5.0*]) } {
 323     run_dump_test cofftag
 324 }
 325
 326 # Test omitting conditionals from listings.
 327 proc test_cond {} {
 328     global comp_output
 329     global srcdir
 330     global subdir
 331
 332     set testname "conditional listings"
 333     gas_run cond.s "-alc" ">dump.out"
 334     if ![string match "" $comp_output] {
 335         send_log "$comp_output\n"
 336         fail $testname
 337     } else {
 338         if { [regexp_diff dump.out $srcdir/$subdir/cond.l] } {
 339             fail $testname
 340         } else {
 341             pass $testname
 342         }
 343     }
 344 }
 345
 346 # This test is not suitable for the PA for various reasons
 347 # not limited to the fact that it depends on specific section
 348 # names appearing in the output file.
 349 # again, p2align doesn't work on c54x target
 350 case $target_triplet in {
 351     { hppa*-*-* } { }
 352     { *c4x*-*-* } { }
 353     { *c54x*-*-* } { }
 354     { rx-*-* } { }
 355     default {
 356         test_cond
 357         remote_download host "$srcdir/$subdir/incbin.dat"
 358         run_dump_test incbin
 359     }
 360 }
 361
 362 if {  ([istarget "i*86-*-*pe*"] && ![istarget "i*86-*-openbsd*"]) \
 363     || [istarget "i*86-*-cygwin*"] \
 364     || [istarget "i*86-*-mingw32*"] } {
 365   gas_test "fastcall.s" ""   "" "fastcall labels"
 366 }
 367
 368 if { ![istarget "bfin-*-*"] } then {
 369     run_dump_test assign
 370 }
 371 run_dump_test sleb128
 372 run_dump_test sleb128-2
 373 run_dump_test sleb128-3
 374 run_dump_test sleb128-4
 375 run_dump_test sleb128-5
 376 # .byte is not 8 bits on either tic4x or tic54x
 377 if { ![istarget "tic4x*-*-*"] && ![istarget "tic54x*-*-*"] } {
 378     run_dump_test sleb128-7
 379 }
 380
 381 # .byte is 32 bits on tic4x, and .p2align isn't supported on tic54x
 382 # .space is different on hppa*-hpux.
 383 # MeP put bytes into packets.
 384 if { ![istarget "tic4x*-*-*"] && ![istarget "tic54x*-*-*"] && ![istarget "hppa*-*-hpux*"] && ![istarget "mep*-*-*"] } {
 385     run_dump_test relax
 386 }
 387
 388 # powerpc and s390 allow a string argument to .byte
 389 if { ![istarget "powerpc*-*-*"] && ![istarget "rs6000*-*-*"] && ![istarget "s390*-*-*"] } {
 390     run_dump_test byte
 391 }
 392
 393 # .quad is 16 bytes on i960.
 394 if { ![istarget "i960-*-*"] } {
 395     run_dump_test quad
 396 }
 397
 398 # som doesn't use .data section.
 399 case $target_triplet in {
 400     { hppa*64*-*-* } {
 401         run_dump_test octa
 402     }
 403     { hppa*-*-hpux* } { }
 404     default {
 405         run_dump_test octa
 406     }
 407 }
 408
 409 # .set works differently on some targets.
 410 case $target_triplet in {
 411     { alpha*-*-* } { }
 412     { mips*-*-* } { }
 413     { *c54x*-*-* } { }
 414     { z80-*-* } { }
 415     default {
 416         run_dump_test weakref1
 417         run_dump_test weakref1g
 418         run_dump_test weakref1l
 419         run_dump_test weakref1u
 420         run_dump_test weakref1w
 421     }
 422 }
 423 gas_test_error "weakref2.s" "" "e: would close weakref loop: e => a => b => c => d => e"
 424 gas_test_error "weakref3.s" "" "a: would close weakref loop: a => b => c => d => e => a"
 425 gas_test_error "weakref4.s" "" "is already defined"
 426
 427 run_dump_test string
 428
 429 load_lib gas-dg.exp
 430 dg-init
 431 dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/err-*.s $srcdir/$subdir/warn-*.s]] "" ""
 432 dg-finish