1 2015-08-27 Ulrich Weigand <uweigand@de.ibm.com>
3 * ppc-linux-tdep.c (ppc_linux_spe_context_lookup): Do not
4 attempt to relocate a TLS variable offset.
6 2015-08-27 Ulrich Weigand <uweigand@de.ibm.com>
8 * spu-multiarch.c (parse_spufs_run): Bail out if inferior is not
9 registered yet. Set inferior_ptid while calling target_read_memory.
11 2015-08-27 Ulrich Weigand <uweigand@de.ibm.com>
13 * nat/linux-ptrace.h (GDB_ARCH_TRAP_BRKPT): Replace by ...
14 (GDB_ARCH_IS_TRAP_BRKPT): ... this. Add __powerpc__ case.
15 * linux-nat.c (check_stopped_by_breakpoint): Use
16 GDB_ARCH_IS_TRAP_BRKPT instead of GDB_ARCH_TRAP_BRKPT.
18 2015-08-27 Ulrich Weigand <uweigand@de.ibm.com>
20 * linux-thread-db.c (thread_db_get_thread_local_address): If the
21 thread was not yet discovered, use thread_from_lwp instead of
22 calling thread_db_find_new_threads_1.
24 2015-08-27 Simon Marchi <simon.marchi@ericsson.com>
26 * m88k-tdep.c (m88k_analyze_prologue): Fix inverted allocation
29 2015-08-27 Simon Marchi <simon.marchi@ericsson.com>
31 * NEWS: Document support for non-8-bits addressable memory.
33 2015-08-27 Pedro Alves <palves@redhat.com>
35 * configure.ac: Remove AC_TYPE_SIGNAL call.
36 * configure, config.in: Regenerate.
38 2015-08-27 Pedro Alves <palves@redhat.com>
40 * cp-support.c (gdb_demangle): Use sighandler_t. Remove cast.
41 * extension-priv.h: Include signal.h.
42 (struct signal_handler) <handler>: Change type to sighandler_t.
43 * extension.c (install_gdb_sigint_handler): Use sighandler_t.
44 * inflow.c (sigint_ours, sigquit_ours): Change type to
46 (child_terminal_inferior): Remove casts.
47 (child_terminal_ours_1, new_tty): Use sighandler_t. Remove casts.
48 (osig): Change type to sighandler_t.
49 * nto-procfs.c (ofunc): Change type to sighandler_t.
50 (procfs_wait): Remove casts.
51 * remote-m32r-sdi.c (m32r_wait, m32r_load): Use sighandler_t.
52 * remote-sim.c (gdbsim_wait): Use sighandler_t.
53 * utils.c (wait_to_die_with_timeout): Use sighandler_t.
55 2015-08-27 Pedro Alves <palves@redhat.com>
57 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add signal-h.
58 * gnulib/aclocal.m4: Renegerate.
59 * gnulib/config.in: Renegerate.
60 * gnulib/configure: Renegerate.
61 * gnulib/import/Makefile.am: Update.
62 * gnulib/import/Makefile.in: Regenerate.
63 * gnulib/import/m4/gnulib-cache.m4: Update.
64 * gnulib/import/m4/gnulib-comp.m4: Update.
65 * gnulib/import/m4/signal_h.m4: New file.
66 * gnulib/import/signal.in.h: New file.
68 2015-08-27 Pedro Alves <palves@redhat.com>
70 * remote.c (DEFAULT_MAX_MEMORY_PACKET_SIZE)
71 (MIN_MEMORY_PACKET_SIZE): New.
72 (MAX_REMOTE_PACKET_SIZE, MIN_REMOTE_PACKET_SIZE): Delete.
73 (get_memory_packet_size): Adjust. No longer limit the max packet
75 (set_memory_packet_size): Adjust, and remove dead code.
76 (remote_check_symbols): Use xmalloc and a cleanup instead of
78 (remote_packet_size): No longer cap the packet size.
79 (putpkt_binary): Use xmalloc and a cleanup instead of alloca.
81 2015-08-26 Luis Machado <lgustavo@codesourcery.com>
83 * compile/compile.c (compile_to_object): Mention language in
86 2015-08-26 Patrick Palka <patrick@parcs.ath.cx>
88 * target.c (target_pre_inferior): Unset attach_flag.
90 2015-08-26 Simon Marchi <simon.marchi@ericsson.com>
92 * gdbarch.sh (append_name): Fix type in XRESIZEVEC.
93 * gdbarch.c: Re-generate.
95 2015-08-26 Simon Marchi <simon.marchi@ericsson.com>
97 * aarch64-linux-nat.c (aarch64_add_process): Replace xmalloc-family
98 function with the XNEW-family equivalent.
99 * aarch64-tdep.c (aarch64_gdbarch_init): Likewise.
100 * ada-exp.y (write_ambiguous_var): Likewise.
101 * ada-lang.c (resolve_subexp): Likewise.
102 (user_select_syms): Likewise.
103 (assign_aggregate): Likewise.
104 (ada_evaluate_subexp): Likewise.
105 (cache_symbol): Likewise.
106 * addrmap.c (allocate_key): Likewise.
107 (addrmap_create_mutable): Likewise.
108 * aix-thread.c (sync_threadlists): Likewise.
109 * alpha-tdep.c (alpha_push_dummy_call): Likewise.
110 (alpha_gdbarch_init): Likewise.
111 * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
112 * arm-linux-nat.c (arm_linux_add_process): Likewise.
113 * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
114 * arm-tdep.c (push_stack_item): Likewise.
115 (arm_displaced_step_copy_insn): Likewise.
116 (arm_gdbarch_init): Likewise.
117 (_initialize_arm_tdep): Likewise.
118 * avr-tdep.c (push_stack_item): Likewise.
119 * ax-general.c (new_agent_expr): Likewise.
120 * block.c (block_initialize_namespace): Likewise.
121 * breakpoint.c (alloc_counted_command_line): Likewise.
122 (update_dprintf_command_list): Likewise.
123 (parse_breakpoint_sals): Likewise.
124 (decode_static_tracepoint_spec): Likewise.
125 (until_break_command): Likewise.
126 (clear_command): Likewise.
127 (update_global_location_list): Likewise.
128 (get_breakpoint_objfile_data) Likewise.
129 * btrace.c (ftrace_new_function): Likewise.
130 (btrace_set_insn_history): Likewise.
131 (btrace_set_call_history): Likewise.
132 * buildsym.c (add_symbol_to_list): Likewise.
133 (record_pending_block): Likewise.
134 (start_subfile): Likewise.
135 (start_buildsym_compunit): Likewise.
136 (push_subfile): Likewise.
137 (end_symtab_get_static_block): Likewise.
138 (buildsym_init): Likewise.
139 * cli/cli-cmds.c (source_command): Likewise.
140 * cli/cli-decode.c (add_cmd): Likewise.
141 * cli/cli-script.c (build_command_line): Likewise.
142 (setup_user_args): Likewise.
143 (realloc_body_list): Likewise.
144 (process_next_line): Likewise.
145 (copy_command_lines): Likewise.
146 * cli/cli-setshow.c (do_set_command): Likewise.
147 * coff-pe-read.c (read_pe_exported_syms): Likewise.
148 * coffread.c (coff_locate_sections): Likewise.
149 (coff_symtab_read): Likewise.
150 (coff_read_struct_type): Likewise.
151 * common/cleanups.c (make_my_cleanup2): Likewise.
152 * common/common-exceptions.c (throw_it): Likewise.
153 * common/filestuff.c (make_cleanup_close): Likewise.
154 * common/format.c (parse_format_string): Likewise.
155 * common/queue.h (DEFINE_QUEUE_P): Likewise.
156 * compile/compile-object-load.c (munmap_list_add): Likewise.
157 (compile_object_load): Likewise.
158 * compile/compile-object-run.c (compile_object_run): Likewise.
159 * compile/compile.c (append_args): Likewise.
160 * corefile.c (specify_exec_file_hook): Likewise.
161 * cp-support.c (make_symbol_overload_list): Likewise.
162 * cris-tdep.c (push_stack_item): Likewise.
163 (cris_gdbarch_init): Likewise.
164 * ctf.c (ctf_trace_file_writer_new): Likewise.
165 * dbxread.c (init_header_files): Likewise.
166 (add_new_header_file): Likewise.
167 (init_bincl_list): Likewise.
168 (dbx_end_psymtab): Likewise.
169 (start_psymtab): Likewise.
170 (dbx_end_psymtab): Likewise.
171 * dcache.c (dcache_init): Likewise.
172 * dictionary.c (dict_create_hashed): Likewise.
173 (dict_create_hashed_expandable): Likewise.
174 (dict_create_linear): Likewise.
175 (dict_create_linear_expandable): Likewise.
176 * dtrace-probe.c (dtrace_process_dof_probe): Likewise.
177 * dummy-frame.c (register_dummy_frame_dtor): Likewise.
178 * dwarf2-frame-tailcall.c (cache_new_ref1): Likewise.
179 * dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
180 (decode_frame_entry_1): Likewise.
181 * dwarf2expr.c (new_dwarf_expr_context): Likewise.
182 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
183 * dwarf2read.c (dwarf2_has_info): Likewise.
184 (create_signatured_type_table_from_index): Likewise.
185 (dwarf2_read_index): Likewise.
186 (dw2_get_file_names_reader): Likewise.
187 (create_all_type_units): Likewise.
188 (read_cutu_die_from_dwo): Likewise.
189 (init_tu_and_read_dwo_dies): Likewise.
190 (init_cutu_and_read_dies): Likewise.
191 (create_all_comp_units): Likewise.
192 (queue_comp_unit): Likewise.
193 (inherit_abstract_dies): Likewise.
194 (read_call_site_scope): Likewise.
195 (dwarf2_add_field): Likewise.
196 (dwarf2_add_typedef): Likewise.
197 (dwarf2_add_member_fn): Likewise.
198 (attr_to_dynamic_prop): Likewise.
199 (abbrev_table_alloc_abbrev): Likewise.
200 (abbrev_table_read_table): Likewise.
201 (add_include_dir): Likewise.
202 (add_file_name): Likewise.
203 (dwarf_decode_line_header): Likewise.
204 (dwarf2_const_value_attr): Likewise.
205 (dwarf_alloc_block): Likewise.
206 (parse_macro_definition): Likewise.
207 (set_die_type): Likewise.
208 (write_psymtabs_to_index): Likewise.
209 (create_cus_from_index): Likewise.
210 (dwarf2_create_include_psymtab): Likewise.
211 (process_psymtab_comp_unit_reader): Likewise.
212 (build_type_psymtab_dependencies): Likewise.
213 (read_comp_units_from_section): Likewise.
214 (compute_compunit_symtab_includes): Likewise.
215 (create_dwo_unit_in_dwp_v1): Likewise.
216 (create_dwo_unit_in_dwp_v2): Likewise.
217 (read_func_scope): Likewise.
218 (process_structure_scope): Likewise.
219 (mark_common_block_symbol_computed): Likewise.
220 (load_partial_dies): Likewise.
221 (dwarf2_symbol_mark_computed): Likewise.
222 * elfread.c (elf_symfile_segments): Likewise.
223 (elf_read_minimal_symbols): Likewise.
224 * environ.c (make_environ): Likewise.
225 * eval.c (evaluate_subexp_standard): Likewise.
226 * event-loop.c (create_file_handler): Likewise.
227 (create_async_signal_handler): Likewise.
228 (create_async_event_handler): Likewise.
229 (create_timer): Likewise.
230 * exec.c (build_section_table): Likewise.
231 * fbsd-nat.c (fbsd_remember_child): Likewise.
232 * fork-child.c (fork_inferior): Likewise.
233 * frv-tdep.c (new_variant): Likewise.
234 * gdbarch.sh (gdbarch_alloc): Likewise.
235 (append_name): Likewise.
236 * gdbtypes.c (rank_function): Likewise.
237 (copy_type_recursive): Likewise.
238 (add_dyn_prop): Likewise.
239 * gnu-nat.c (make_proc): Likewise.
240 (make_inf): Likewise.
241 (gnu_write_inferior): Likewise.
242 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
243 (build_std_type_info_type): Likewise.
244 * guile/scm-param.c (compute_enum_list): Likewise.
245 * guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
246 * guile/scm-value.c (gdbscm_value_call): Likewise.
247 * h8300-tdep.c (h8300_gdbarch_init): Likewise.
248 * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
249 (read_unwind_info): Likewise.
250 * ia64-tdep.c (ia64_gdbarch_init): Likewise.
251 * infcall.c (dummy_frame_context_saver_setup): Likewise.
252 (call_function_by_hand_dummy): Likewise.
253 * infcmd.c (step_once): Likewise.
254 (finish_forward): Likewise.
255 (attach_command): Likewise.
256 (notice_new_inferior): Likewise.
257 * inferior.c (add_inferior_silent): Likewise.
258 * infrun.c (add_displaced_stepping_state): Likewise.
259 (save_infcall_control_state): Likewise.
260 (save_inferior_ptid): Likewise.
261 (_initialize_infrun): Likewise.
262 * jit.c (bfd_open_from_target_memory): Likewise.
263 (jit_gdbarch_data_init): Likewise.
264 * language.c (add_language): Likewise.
265 * linespec.c (decode_line_2): Likewise.
266 * linux-nat.c (add_to_pid_list): Likewise.
267 (add_initial_lwp): Likewise.
268 * linux-thread-db.c (add_thread_db_info): Likewise.
269 (record_thread): Likewise.
270 (info_auto_load_libthread_db): Likewise.
271 * m32c-tdep.c (m32c_gdbarch_init): Likewise.
272 * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
273 * m68k-tdep.c (m68k_gdbarch_init): Likewise.
274 * m88k-tdep.c (m88k_analyze_prologue): Likewise.
275 * macrocmd.c (macro_define_command): Likewise.
276 * macroexp.c (gather_arguments): Likewise.
277 * macroscope.c (sal_macro_scope): Likewise.
278 * macrotab.c (new_macro_table): Likewise.
279 * mdebugread.c (push_parse_stack): Likewise.
280 (parse_partial_symbols): Likewise.
281 (parse_symbol): Likewise.
282 (psymtab_to_symtab_1): Likewise.
283 (new_block): Likewise.
284 (new_psymtab): Likewise.
285 (mdebug_build_psymtabs): Likewise.
286 (add_pending): Likewise.
287 (elfmdebug_build_psymtabs): Likewise.
288 * mep-tdep.c (mep_gdbarch_init): Likewise.
289 * mi/mi-main.c (mi_execute_command): Likewise.
290 * mi/mi-parse.c (mi_parse_argv): Likewise.
291 * minidebug.c (lzma_open): Likewise.
292 * minsyms.c (terminate_minimal_symbol_table): Likewise.
293 * mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise.
294 * mips-tdep.c (mips_gdbarch_init): Likewise.
295 * mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
296 * msp430-tdep.c (msp430_gdbarch_init): Likewise.
297 * mt-tdep.c (mt_registers_info): Likewise.
298 * nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise.
299 * nat/linux-btrace.c (linux_enable_bts): Likewise.
300 (linux_enable_pt): Likewise.
301 * nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise.
302 (linux_xfer_osdata_processgroups): Likewise.
303 * nios2-tdep.c (nios2_gdbarch_init): Likewise.
304 * nto-procfs.c (procfs_meminfo): Likewise.
305 * objc-lang.c (start_msglist): Likewise.
306 (selectors_info): Likewise.
307 (classes_info): Likewise.
308 (find_methods): Likewise.
309 * objfiles.c (allocate_objfile): Likewise.
310 (update_section_map): Likewise.
311 * osabi.c (gdbarch_register_osabi): Likewise.
312 (gdbarch_register_osabi_sniffer): Likewise.
313 * parse.c (start_arglist): Likewise.
314 * ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise.
315 (hwdebug_insert_point): Likewise.
316 * printcmd.c (display_command): Likewise.
317 (ui_printf): Likewise.
318 * procfs.c (create_procinfo): Likewise.
319 (load_syscalls): Likewise.
320 (proc_get_LDT_entry): Likewise.
321 (proc_update_threads): Likewise.
322 * prologue-value.c (make_pv_area): Likewise.
323 (pv_area_store): Likewise.
324 * psymtab.c (extend_psymbol_list): Likewise.
325 (init_psymbol_list): Likewise.
326 (allocate_psymtab): Likewise.
327 * python/py-inferior.c (add_thread_object): Likewise.
328 * python/py-param.c (compute_enum_values): Likewise.
329 * python/py-value.c (valpy_call): Likewise.
330 * python/py-varobj.c (py_varobj_iter_next): Likewise.
331 * python/python.c (ensure_python_env): Likewise.
332 * record-btrace.c (record_btrace_start_replaying): Likewise.
333 * record-full.c (record_full_reg_alloc): Likewise.
334 (record_full_mem_alloc): Likewise.
335 (record_full_end_alloc): Likewise.
336 (record_full_core_xfer_partial): Likewise.
337 * regcache.c (get_thread_arch_aspace_regcache): Likewise.
338 * remote-fileio.c (remote_fileio_init_fd_map): Likewise.
339 * remote-notif.c (remote_notif_state_allocate): Likewise.
340 * remote.c (demand_private_info): Likewise.
341 (remote_notif_stop_alloc_reply): Likewise.
342 (remote_enable_btrace): Likewise.
343 * reverse.c (save_bookmark_command): Likewise.
344 * rl78-tdep.c (rl78_gdbarch_init): Likewise.
345 * rx-tdep.c (rx_gdbarch_init): Likewise.
346 * s390-linux-nat.c (s390_insert_watchpoint): Likewise.
347 * ser-go32.c (dos_get_tty_state): Likewise.
348 (dos_copy_tty_state): Likewise.
349 * ser-mingw.c (ser_windows_open): Likewise.
350 (ser_console_wait_handle): Likewise.
351 (ser_console_get_tty_state): Likewise.
352 (make_pipe_state): Likewise.
353 (net_windows_open): Likewise.
354 * ser-unix.c (hardwire_get_tty_state): Likewise.
355 (hardwire_copy_tty_state): Likewise.
356 * solib-aix.c (solib_aix_new_lm_info): Likewise.
357 * solib-dsbt.c (dsbt_current_sos): Likewise.
358 (dsbt_relocate_main_executable): Likewise.
359 * solib-frv.c (frv_current_sos): Likewise.
360 (frv_relocate_main_executable): Likewise.
361 * solib-spu.c (spu_bfd_fopen): Likewise.
362 * solib-svr4.c (lm_info_read): Likewise.
363 (svr4_copy_library_list): Likewise.
364 (svr4_default_sos): Likewise.
365 * source.c (find_source_lines): Likewise.
366 (line_info): Likewise.
367 (add_substitute_path_rule): Likewise.
368 * spu-linux-nat.c (spu_bfd_open): Likewise.
369 * spu-tdep.c (info_spu_dma_cmdlist): Likewise.
370 * stabsread.c (dbx_lookup_type): Likewise.
371 (read_type): Likewise.
372 (read_member_functions): Likewise.
373 (read_struct_fields): Likewise.
374 (read_baseclasses): Likewise.
375 (read_args): Likewise.
376 (_initialize_stabsread): Likewise.
377 * stack.c (func_command): Likewise.
378 * stap-probe.c (handle_stap_probe): Likewise.
379 * symfile.c (addrs_section_sort): Likewise.
380 (addr_info_make_relative): Likewise.
381 (load_section_callback): Likewise.
382 (add_symbol_file_command): Likewise.
383 (init_filename_language_table): Likewise.
384 * symtab.c (create_filename_seen_cache): Likewise.
385 (sort_search_symbols_remove_dups): Likewise.
386 (search_symbols): Likewise.
387 * target.c (make_cleanup_restore_target_terminal): Likewise.
388 * thread.c (new_thread): Likewise.
389 (enable_thread_stack_temporaries): Likewise.
390 (make_cleanup_restore_current_thread): Likewise.
391 (thread_apply_all_command): Likewise.
392 * tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
393 * top.c (gdb_readline_wrapper): Likewise.
394 * tracefile-tfile.c (tfile_trace_file_writer_new): Likewise.
395 * tracepoint.c (trace_find_line_command): Likewise.
396 (all_tracepoint_actions_and_cleanup): Likewise.
397 (make_cleanup_restore_current_traceframe): Likewise.
398 (get_uploaded_tp): Likewise.
399 (get_uploaded_tsv): Likewise.
400 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
401 (tui_alloc_win_info): Likewise.
402 (tui_alloc_content): Likewise.
403 (tui_add_content_elements): Likewise.
404 * tui/tui-disasm.c (tui_find_disassembly_address): Likewise.
405 (tui_set_disassem_content): Likewise.
406 * ui-file.c (ui_file_new): Likewise.
407 (stdio_file_new): Likewise.
408 (tee_file_new): Likewise.
409 * utils.c (make_cleanup_restore_integer): Likewise.
410 (add_internal_problem_command): Likewise.
411 * v850-tdep.c (v850_gdbarch_init): Likewise.
412 * valops.c (find_oload_champ): Likewise.
413 * value.c (allocate_value_lazy): Likewise.
414 (record_latest_value): Likewise.
415 (create_internalvar): Likewise.
416 * varobj.c (install_variable): Likewise.
417 (new_variable): Likewise.
418 (new_root_variable): Likewise.
420 (_initialize_varobj): Likewise.
421 * windows-nat.c (windows_make_so): Likewise.
422 * x86-nat.c (x86_add_process): Likewise.
423 * xcoffread.c (arrange_linetable): Likewise.
424 (allocate_include_entry): Likewise.
425 (process_linenos): Likewise.
426 (SYMBOL_DUP): Likewise.
427 (xcoff_start_psymtab): Likewise.
428 (xcoff_end_psymtab): Likewise.
429 * xml-support.c (gdb_xml_parse_attr_ulongest): Likewise.
430 * xtensa-tdep.c (xtensa_register_type): Likewise.
431 * gdbarch.c: Regenerate.
432 * gdbarch.h: Regenerate.
434 2015-08-25 Don Breazeal <donb@codesourcery.com>
436 * infrun.c (follow_exec): Re-order operations for
437 handling follow-exec-mode "new".
438 (handle_inferior_event_1): Assign ecs->event_thread
439 to the current thread.
440 * remote.c (get_remote_arch_state): Add an assertion.
442 2015-08-26 Pedro Alves <palves@redhat.com>
444 * MAINTAINERS: Add Markus Metzger as btrace maintainer.
446 2015-08-25 Pedro Alves <palves@redhat.com>
449 * defs.h (maybe_quit): Declare.
450 (QUIT): Now calls maybe_quit.
451 * event-loop.c (clear_async_signal_handler)
452 (async_signal_handler_is_marked): New functions.
453 * event-loop.h (async_signal_handler_is_marked)
454 (clear_async_signal_handler): New declarations.
455 * remote.c (remote_check_pending_interrupt): New function.
456 (interrupt_query): Use make_cleanup_restore_target_terminal. No
457 longer check whether the target is async. If waiting for a stop
458 reply, and a Ctrl-C as been sent to the target, offer to
459 disconnect, and throw TARGET_CLOSE_ERROR instead of a quit.
460 Otherwise do not disconnect and throw a quit.
461 (_initialize_remote): Install remote_check_pending_interrupt as
462 to_check_pending_interrupt.
463 * target.c (target_check_pending_interrupt): New function.
464 * target.h (struct target_ops) <to_check_pending_interrupt>: New
466 (target_check_pending_interrupt): New declaration.
467 * utils.c (maybe_quit): New function.
468 * target-delegates.c: Regenerate.
470 2015-08-25 Yao Qi <yao.qi@linaro.org>
472 * nat/aarch64-linux-hw-point.c (debug_reg_change_callback):
473 Rename local variable pid to tid, and get lwpid of lwp. Update
476 2015-08-25 Pierre-Marie de Rodat <derodat@adacore.com>
478 * ada-lang.c (ada_read_var_value): Add a var_block argument
479 and pass it to default_read_var_value.
480 * block.c (block_static_link): New accessor.
481 * block.h (block_static_link): Declare it.
482 * buildsym.c (finish_block_internal): Add a static_link
483 argument. If there is a static link, associate it to the new
485 (finish_block): Add a static link argument and pass it to
486 finish_block_internal.
487 (end_symtab_get_static_block): Update calls to finish_block and
488 to finish_block_internal.
489 (end_symtab_with_blockvector): Update call to
490 finish_block_internal.
491 * buildsym.h: Forward-declare struct dynamic_prop.
492 (struct context_stack): Add a static_link field.
493 (finish_block): Add a static link argument.
494 * c-exp.y: Remove an obsolete comment (evaluation of variables
495 already start from the selected frame, and now they climb *up*
496 the call stack) and propagate the block information to the
500 * go-exp.y: Likewise.
501 * jv-exp.y: Likewise.
502 * m2-exp.y: Likewise.
504 * coffread.c (coff_symtab_read): Update calls to finish_block.
505 * dbxread.c (process_one_symbol): Likewise.
506 * xcoffread.c (read_xcoff_symtab): Likewise.
507 * compile/compile-c-symbols.c (convert_one_symbol): Promote the
508 "sym" parameter to struct block_symbol, update its uses and pass
509 its block to calls to read_var_value.
510 (convert_symbol_sym): Update the calls to convert_one_symbol.
511 * compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update
512 call to read_var_value.
513 * dwarf2loc.c (block_op_get_frame_base): New.
514 (dwarf2_block_frame_base_locexpr_funcs): Implement the
515 get_frame_base method.
516 (dwarf2_block_frame_base_loclist_funcs): Likewise.
517 (dwarf2locexpr_baton_eval): Add a frame argument and use it
518 instead of the selected frame in order to evaluate the
520 (dwarf2_evaluate_property): Add a frame argument. Update call
521 to dwarf2_locexpr_baton_eval to provide a frame in available and
522 to handle the absence of address stack.
523 * dwarf2loc.h (dwarf2_evaluate_property): Add a frame argument.
524 * dwarf2read.c (attr_to_dynamic_prop): Add a forward
526 (read_func_scope): Record any available static link description.
527 Update call to finish_block.
528 (read_lexical_block_scope): Update call to finish_block.
529 * findvar.c (follow_static_link): New.
530 (get_hosting_frame): New.
531 (default_read_var_value): Add a var_block argument. Use
532 get_hosting_frame to handle non-local references.
533 (read_var_value): Add a var_block argument and pass it to the
534 LA_READ_VAR_VALUE method.
535 * gdbtypes.c (resolve_dynamic_range): Update calls to
536 dwarf2_evaluate_property.
537 (resolve_dynamic_type_internal): Likewise.
538 * guile/scm-frame.c (gdbscm_frame_read_var): Update call to
539 read_var_value, passing it the block coming from symbol lookup.
540 * guile/scm-symbol.c (gdbscm_symbol_value): Update call to
541 read_var_value (TODO).
542 * infcmd.c (finish_command_continuation): Update call to
543 read_var_value, passing it the block coming from symbol lookup.
544 * infrun.c (insert_exception_resume_breakpoint): Likewise.
545 * language.h (struct language_defn): Add a var_block argument to
546 the LA_READ_VAR_VALUE method.
547 * objfiles.c (struct static_link_htab_entry): New.
548 (static_link_htab_entry_hash): New.
549 (static_link_htab_entry_eq): New.
550 (objfile_register_static_link): New.
551 (objfile_lookup_static_link): New.
552 (free_objfile): Free the STATIC_LINKS hashed map if needed.
553 * objfiles.h: Include hashtab.h.
554 (struct objfile): Add a static_links field.
555 (objfile_register_static_link): New.
556 (objfile_lookup_static_link): New.
557 * printcmd.c (print_variable_and_value): Update call to
559 * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
560 * python/py-frame.c (frapy_read_var): Update call to
561 read_var_value, passing it the block coming from symbol lookup.
562 * python/py-framefilter.c (extract_sym): Add a sym_block
563 parameter and set the pointed value to NULL (TODO).
564 (enumerate_args): Update call to extract_sym.
565 (enumerate_locals): Update calls to extract_sym and to
567 * python/py-symbol.c (sympy_value): Update call to
568 read_var_value (TODO).
569 * stack.c (read_frame_local): Update call to read_var_value.
570 (read_frame_arg): Likewise.
571 (return_command): Likewise.
572 * symtab.h (struct symbol_block_ops): Add a get_frame_base
574 (struct symbol): Add a block field.
575 (SYMBOL_BLOCK): New accessor.
576 * valops.c (value_of_variable): Remove frame/block handling and
577 pass the block argument to read_var_value, which does this job
579 (value_struct_elt_for_reference): Update calls to
581 (value_of_this): Pass the block found to read_var_value.
582 * value.h (read_var_value): Add a var_block argument.
583 (default_read_var_value): Likewise.
585 2015-08-25 Yao Qi <yao.qi@linaro.org>
587 * aarch64-linux-nat.c (aarch64_linux_new_thread): Move it to ...
588 * nat/aarch64-linux.c (aarch64_linux_new_thread): ... here.
589 * nat/aarch64-linux.h (aarch64_linux_new_thread): Declare.
591 2015-08-25 Yao Qi <yao.qi@linaro.org>
593 * Makefile.in (aarch64-liunx.o): New rule.
594 (HFILES_NO_SRCDIR): Add aarch64-linux.h.
595 * config/aarch64/linux.mh (NAT_FILE): Add aarch64-linux.o.
596 * aarch64-linux-nat.c: Include nat/aarch64-linux.h.
597 * aarch64-linux-nat.c (aarch64_get_debug_reg_state): Make it
599 (aarch64_linux_prepare_to_resume): Move it nat/aarch64-linux.c.
600 * nat/aarch64-linux-hw-point.h (aarch64_debug_reg_state): Declare
601 * nat/aarch64-linux.c: New file.
602 * nat/aarch64-linux.h: New file.
604 2015-08-25 Yao Qi <yao.qi@linaro.org>
606 * aarch64-linux-nat.c (aarch64_linux_prepare_to_resume): Use
607 lwp_arch_private_info and ptid_of_lwp.
609 2015-08-25 Yao Qi <yao.qi@linaro.org>
611 * aarch64-linux-nat.c (struct arch64_dr_update_callback_param):
612 Move it to nat/aarch64-linux-hw-point.c.
613 (debug_reg_change_callback): Likewise.
614 (aarch64_notify_debug_reg_change): :Likewise.
615 * nat/aarch64-linux-hw-point.c: Include nat/linux-nat.h.
616 (aarch64_dr_update_callback_param): New.
617 (debug_reg_change_callback): New function.
618 (aarch64_notify_debug_reg_change): Likewise.
619 * nat/aarch64-linux-hw-point.h (aarch64_notify_debug_reg_change):
620 Remove the declaration.
622 2015-08-25 Yao Qi <yao.qi@linaro.org>
624 * aarch64-linux-nat.c (aarch64_notify_debug_reg_change):
625 Call current_lwp_ptid.
627 2015-08-25 Yao Qi <yao.qi@linaro.org>
629 * aarch64-linux-nat.c (debug_reg_change_callback): Use
632 2015-08-25 Yao Qi <yao.qi@linaro.org>
634 * aarch64-linux-nat.c (debug_reg_change_callback): Call
635 ptid_get_pid rather than ptid_get_lwp.
637 2015-08-24 Pedro Alves <palves@redhat.com>
639 * NEWS (New commands): Mention set/show remote
640 multiprocess-extensions-packet.
641 * remote.c (remote_query_supported): Only tell the server to use
642 the multiprocess extensions if the user hasn't force-disabled them
643 with "set remote multiprocess-extensions-packet off".
645 2015-08-24 Pedro Alves <palves@redhat.com>
647 * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
648 1029a8112290f6eee9d7878a391c49db42c999bd.
649 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4:
651 * gnulib/import/Makefile.am: Update.
652 * gnulib/import/Makefile.in: Update.
653 * gnulib/import/alloca.in.h: Update.
654 * gnulib/import/basename-lgpl.c: Update.
655 * gnulib/import/canonicalize-lgpl.c: Update.
656 * gnulib/import/config.charset: Update.
657 * gnulib/import/dirent.in.h: Update.
658 * gnulib/import/dirfd.c: Update.
659 * gnulib/import/dirname-lgpl.c: Update.
660 * gnulib/import/dirname.h: Update.
661 * gnulib/import/dosname.h: Update.
662 * gnulib/import/errno.in.h: Update.
663 * gnulib/import/extra/snippet/arg-nonnull.h: Update.
664 * gnulib/import/extra/snippet/c++defs.h: Update.
665 * gnulib/import/extra/snippet/warn-on-use.h: Update.
666 * gnulib/import/extra/update-copyright: Update.
667 * gnulib/import/float+.h: Update.
668 * gnulib/import/float.c: Update.
669 * gnulib/import/float.in.h: Update.
670 * gnulib/import/fnmatch.c: Update.
671 * gnulib/import/fnmatch.in.h: Update.
672 * gnulib/import/fnmatch_loop.c: Update.
673 * gnulib/import/fpucw.h: Update.
674 * gnulib/import/frexp.c: Update.
675 * gnulib/import/frexpl.c: Update.
676 * gnulib/import/gettimeofday.c: Update.
677 * gnulib/import/inttypes.in.h: Update.
678 * gnulib/import/isnan.c: Update.
679 * gnulib/import/isnand-nolibm.h: Update.
680 * gnulib/import/isnand.c: Update.
681 * gnulib/import/isnanl-nolibm.h: Update.
682 * gnulib/import/isnanl.c: Update.
683 * gnulib/import/itold.c: Update.
684 * gnulib/import/localcharset.c: Update.
685 * gnulib/import/localcharset.h: Update.
686 * gnulib/import/lstat.c: Update.
687 * gnulib/import/m4/00gnulib.m4: Update.
688 * gnulib/import/m4/absolute-header.m4: Update.
689 * gnulib/import/m4/alloca.m4: Update.
690 * gnulib/import/m4/canonicalize.m4: Update.
691 * gnulib/import/m4/codeset.m4: Update.
692 * gnulib/import/m4/configmake.m4: Update.
693 * gnulib/import/m4/dirent_h.m4: Update.
694 * gnulib/import/m4/dirfd.m4: Update.
695 * gnulib/import/m4/dirname.m4: Update.
696 * gnulib/import/m4/double-slash-root.m4: Update.
697 * gnulib/import/m4/eealloc.m4: Update.
698 * gnulib/import/m4/errno_h.m4: Update.
699 * gnulib/import/m4/exponentd.m4: Update.
700 * gnulib/import/m4/exponentl.m4: Update.
701 * gnulib/import/m4/extensions.m4: Update.
702 * gnulib/import/m4/extern-inline.m4: Update.
703 * gnulib/import/m4/fcntl-o.m4: Update.
704 * gnulib/import/m4/float_h.m4: Update.
705 * gnulib/import/m4/fnmatch.m4: Update.
706 * gnulib/import/m4/fpieee.m4: Update.
707 * gnulib/import/m4/frexp.m4: Update.
708 * gnulib/import/m4/frexpl.m4: Update.
709 * gnulib/import/m4/gettimeofday.m4: Update.
710 * gnulib/import/m4/glibc21.m4: Update.
711 * gnulib/import/m4/gnulib-cache.m4: Update.
712 * gnulib/import/m4/gnulib-common.m4: Update.
713 * gnulib/import/m4/gnulib-comp.m4: Update.
714 * gnulib/import/m4/gnulib-tool.m4: Update.
715 * gnulib/import/m4/include_next.m4: Update.
716 * gnulib/import/m4/inttypes-pri.m4: Update.
717 * gnulib/import/m4/inttypes.m4: Update.
718 * gnulib/import/m4/isnand.m4: Update.
719 * gnulib/import/m4/isnanl.m4: Update.
720 * gnulib/import/m4/largefile.m4: Update.
721 * gnulib/import/m4/localcharset.m4: Update.
722 * gnulib/import/m4/locale-fr.m4: Update.
723 * gnulib/import/m4/locale-ja.m4: Update.
724 * gnulib/import/m4/locale-zh.m4: Update.
725 * gnulib/import/m4/longlong.m4: Update.
726 * gnulib/import/m4/lstat.m4: Update.
727 * gnulib/import/m4/malloc.m4: Update.
728 * gnulib/import/m4/malloca.m4: Update.
729 * gnulib/import/m4/math_h.m4: Update.
730 * gnulib/import/m4/mbrtowc.m4: Update.
731 * gnulib/import/m4/mbsinit.m4: Update.
732 * gnulib/import/m4/mbsrtowcs.m4: Update.
733 * gnulib/import/m4/mbstate_t.m4: Update.
734 * gnulib/import/m4/memchr.m4: Update.
735 * gnulib/import/m4/memmem.m4: Update.
736 * gnulib/import/m4/mmap-anon.m4: Update.
737 * gnulib/import/m4/multiarch.m4: Update.
738 * gnulib/import/m4/nocrash.m4: Update.
739 * gnulib/import/m4/off_t.m4: Update.
740 * gnulib/import/m4/pathmax.m4: Update.
741 * gnulib/import/m4/readlink.m4: Update.
742 * gnulib/import/m4/rename.m4: Update.
743 * gnulib/import/m4/rmdir.m4: Update.
744 * gnulib/import/m4/ssize_t.m4: Update.
745 * gnulib/import/m4/stat.m4: Update.
746 * gnulib/import/m4/stdbool.m4: Update.
747 * gnulib/import/m4/stddef_h.m4: Update.
748 * gnulib/import/m4/stdint.m4: Update.
749 * gnulib/import/m4/stdio_h.m4: Update.
750 * gnulib/import/m4/stdlib_h.m4: Update.
751 * gnulib/import/m4/string_h.m4: Update.
752 * gnulib/import/m4/strstr.m4: Update.
753 * gnulib/import/m4/strtok_r.m4: Update.
754 * gnulib/import/m4/sys_socket_h.m4: Update.
755 * gnulib/import/m4/sys_stat_h.m4: Update.
756 * gnulib/import/m4/sys_time_h.m4: Update.
757 * gnulib/import/m4/sys_types_h.m4: Update.
758 * gnulib/import/m4/time_h.m4: Update.
759 * gnulib/import/m4/unistd_h.m4: Update.
760 * gnulib/import/m4/warn-on-use.m4: Update.
761 * gnulib/import/m4/wchar_h.m4: Update.
762 * gnulib/import/m4/wchar_t.m4: Update.
763 * gnulib/import/m4/wctype_h.m4: Update.
764 * gnulib/import/m4/wint_t.m4: Update.
765 * gnulib/import/malloc.c: Update.
766 * gnulib/import/malloca.c: Update.
767 * gnulib/import/malloca.h: Update.
768 * gnulib/import/math.in.h: Update.
769 * gnulib/import/mbrtowc.c: Update.
770 * gnulib/import/mbsinit.c: Update.
771 * gnulib/import/mbsrtowcs-impl.h: Update.
772 * gnulib/import/mbsrtowcs-state.c: Update.
773 * gnulib/import/mbsrtowcs.c: Update.
774 * gnulib/import/memchr.c: Update.
775 * gnulib/import/memmem.c: Update.
776 * gnulib/import/pathmax.h: Update.
777 * gnulib/import/readlink.c: Update.
778 * gnulib/import/ref-add.sin: Update.
779 * gnulib/import/ref-del.sin: Update.
780 * gnulib/import/rename.c: Update.
781 * gnulib/import/rmdir.c: Update.
782 * gnulib/import/same-inode.h: Update.
783 * gnulib/import/stat.c: Update.
784 * gnulib/import/stdbool.in.h: Update.
785 * gnulib/import/stddef.in.h: Update.
786 * gnulib/import/stdint.in.h: Update.
787 * gnulib/import/stdio.c: Update.
788 * gnulib/import/stdio.in.h: Update.
789 * gnulib/import/stdlib.in.h: Update.
790 * gnulib/import/str-two-way.h: Update.
791 * gnulib/import/streq.h: Update.
792 * gnulib/import/string.in.h: Update.
793 * gnulib/import/stripslash.c: Update.
794 * gnulib/import/strnlen1.c: Update.
795 * gnulib/import/strnlen1.h: Update.
796 * gnulib/import/strstr.c: Update.
797 * gnulib/import/strtok_r.c: Update.
798 * gnulib/import/sys_stat.in.h: Update.
799 * gnulib/import/sys_time.in.h: Update.
800 * gnulib/import/sys_types.in.h: Update.
801 * gnulib/import/time.in.h: Update.
802 * gnulib/import/unistd.in.h: Update.
803 * gnulib/import/verify.h: Update.
804 * gnulib/import/wchar.in.h: Update.
805 * gnulib/import/wctype.in.h: Update.
806 * gnulib/import/gettimeofday.c: New file.
807 * gnulib/import/m4/absolute-header.m4: New file.
808 * gnulib/import/m4/gettimeofday.m4: New file.
809 * gnulib/import/m4/sys_socket_h.m4: New file.
810 * gnulib/import/m4/sys_time_h.m4: New file.
811 * gnulib/import/stdio.c: Delete file.
812 * gnulib/import/sys_time.in.h: New file.
814 2015-08-24 Pedro Alves <palves@redhat.com>
816 * Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_sys_time.h.
817 * common/gdb_sys_time.h: New file.
818 * event-loop.c: Include gdb_sys_time.h instead of sys/time.h.
819 * gdb_select.h: Likewise.
820 * gdb_usleep.c: Likewise.
822 * mi/mi-main.c: Likewise.
823 * mi/mi-parse.h: Likewise.
824 * remote-fileio.c: Likewise.
825 * remote-m32r-sdi.c: Likewise.
826 * remote.c: Likewise.
827 * ser-base.c: Likewise.
828 * ser-pipe.c: Likewise.
829 * ser-tcp.c: Likewise.
830 * ser-unix.c: Likewise.
831 * symfile.c: Likewise.
832 * symfile.c: Likewise. Rename OSIZE to SIZE throughout.
833 * target-memory.c: Include gdb_sys_time.h instead of sys/time.h.
836 2015-08-24 Pedro Alves <palves@redhat.com>
838 * NEWS: Mention removed support for the various ROM monitors.
839 * Makefile.in (ALL_TARGET_OBS): Remove dbug-rom.o, dink32-rom.o,
840 ppcbug-rom.o, m32r-rom.o, dsrec.o and monitor.o from gdb_target_obs.
841 * configure.tgt (h8300-*-*): Remove monitor.o and m32r-rom.o from
843 (m68*-*-*): Remove monitor.o dbug-rom.o and dsrec.o from
845 (microblaze*-linux-*): Remove microblaze-rom.o, monitor.o and
846 dsrec.o from gdb_target_obs.
847 (microblaze*-*-*): Remove microblaze-rom.o, monitor.o and dsrec.o
849 (powerpc-*-lynx*178): Remove monitor.o and dsrec.o from
851 (powerpc*-*-*): Remove monitor.o, dsrec.o, ppcbug-rom.o and
852 dink32-rom.o from gdb_target_obs.
853 (sh*-*-linux*): Remove monitor.o and dsrec.o from gdb_target_obs.
854 (sh*): Remove monitor.o and dsrec.o from gdb_target_obs.
855 * dbug-rom.c, dink32-rom.c, dsrec.c, m32r-rom.c, microblaze-rom.c,
856 monitor.c, monitor.h, ppcbug-rom.c, srec.h: Delete files.
858 2015-08-21 Pedro Alves <palves@redhat.com>
860 * frame.c (null_frame_id): Explicitly zero-initialize.
862 2015-08-21 Tom Tromey <tromey@redhat.com>
864 * dwarf2read.c (struct dwarf2_section_info): Rename field
865 'asection' to 'section'.
866 (dwarf2_has_info, get_section_bfd_owner, get_section_bfd_section)
867 (dwarf2_locate_sections, dwarf2_locate_sections)
868 (locate_dwz_sections, locate_v1_virtual_dwo_sections)
869 (dwarf2_locate_dwo_sections, dwarf2_locate_dwo_sections)
870 (dwarf2_locate_v2_dwp_sections): Adjust.
872 2015-08-21 Patrick Palka <patrick@parcs.ath.cx>
874 * top.h (gdb_in_secondary_prompt_p): Declare.
875 * top.c (gdb_secondary_prompt_depth): Define.
876 (gdb_in_secondary_prompt_p): Define.
877 (gdb_readline_wrapper_cleanup): Decrement
878 gdb_secondary_prompt_depth.
879 (gdb_readline_wrapper): Increment gdb_secondary_prompt_depth.
880 * tui/tui-io.c (tui_getc): Don't clear the prompt line if we
881 are in a secondary prompt.
883 2015-08-21 Patrick Palka <patrick@parcs.ath.cx>
885 * tui/tui-io.c (tui_getc): Use tui_putc instead of waddch to
888 2015-08-21 Gary Benson <gbenson@redhat.com>
890 * gdb_bfd.c (gdb_bfd_iovec_fileio_pread): Add QUIT call.
892 2015-08-21 Gary Benson <gbenson@redhat.com>
894 * target.h (struct target_ops) <to_fileio_open>: New argument
895 warn_if_slow. Update comment. All implementations updated.
896 (target_fileio_open_warn_if_slow): New declaration.
897 * target.c (target_fileio_open): Renamed as...
898 (target_fileio_open_1): ...this. New argument warn_if_slow.
899 Pass warn_if_slow to implementation. Update debug printing.
900 (target_fileio_open): New function.
901 (target_fileio_open_warn_if_slow): Likewise.
902 * gdb_bfd.c (gdb_bfd_iovec_fileio_open): Use new function
903 target_fileio_open_warn_if_slow.
905 2015-08-21 Gary Benson <gbenson@redhat.com>
907 * nat/linux-namespaces.c (linux_mntns_access_fs):
908 Do not overwrite old_chain.
910 2015-08-20 Max Filippov <jcmvbkbc@gmail.com>
912 * arch/xtensa.h: New file.
913 * xtensa-linux-nat.c (gdb_proc_service.h): New #include.
914 (ps_get_thread_area): New function.
915 * xtensa-linux-tdep.c (xtensa_linux_init_abi): Add call to
916 set_gdbarch_fetch_tls_load_module_address to enable TLS support.
917 * xtensa-tdep.c (osabi.h): New #include.
918 (xtensa_gdbarch_init): Call gdbarch_init_osabi to register
919 xtensa-specific hooks.
920 * xtensa-tdep.h (struct xtensa_elf_gregset_t): Add threadptr
921 member and move the structure to arch/xtensa.h.
923 2015-08-21 Pedro Alves <palves@redhat.com>
925 * remote.c (struct readahead_cache): New.
926 (struct remote_state) <readahead_cache>: New field.
927 (remote_open_1): Invalidate the cache.
928 (readahead_cache_invalidate, readahead_cache_invalidate_fd): New
930 (remote_hostio_pwrite): Invalidate the readahead cache.
931 (remote_hostio_pread): Rename to ...
932 (remote_hostio_pread_vFile): ... this.
933 (remote_hostio_pread_from_cache): New function.
934 (remote_hostio_pread): Reimplement.
935 (remote_hostio_close): Invalidate the readahead cache.
937 2015-08-21 Marcin Cieślak <saper@saper.info> (tiny patch)
940 * procfs.c: Include "filestuff.h".
942 2015-08-21 Patrick Palka <patrick@parcs.ath.cx>
944 * tui/tui-data.h (tui_command_info): Remove fields cur_line and
946 * tui/tui-data.c (tui_clear_win_detail) [CMD_WIN]: Don't set
947 cur_line or curch, instead call wmove().
948 (init_win_info) [CMD_WIN]: Likewise.
949 * tui/tui-io.c (tui_puts): Likewise. Don't read cur_line,
950 instead call getcury().
951 (tui_redisplay_readline): Don't set cur_line or curch.
952 (tui_mld_erase_entire_line): Don't read cur_line, instead call
954 (tui_cont_sig): Remove call to wmove.
955 (tui_getc): Don't read cur_line or curch, instead call getcury()
956 or getyx(). Don't set curch.
957 * tui/tui-win.c (make_visible_with_new_height) [CMD_WIN]: Don't
958 set cur_line or curch. Always move cursor to (0,0).
960 2015-08-20 Pedro Alves <palves@redhat.com>
962 * infrun.c (print_target_wait_results): Make extern.
963 * infrun.h (print_target_wait_results): Declare.
964 * remote.c (set_stop_requested_callback): Delete.
965 (process_initial_stop_replies): New function.
966 (remote_start_remote): Use it.
967 (stop_reply_queue_length): New function.
969 2015-08-20 Pedro Alves <palves@redhat.com>
971 * dwarf2read.c (process_full_comp_unit): To tell whether
972 start_subfile managed to deduce a language, test for
973 language_unknown instead of language_c.
975 2015-08-20 Pierre-Marie de Rodat <derodat@adacore.com>
977 * ada-lex.l: Reset the start condition to INITIAL in the rule that
980 2015-08-19 Kevin Buettner <kevinb@redhat.com>
982 * dwarf2read.c (dwarf2_string_attr): New function.
983 (lookup_dwo_unit, process_psymtab_comp_unit_reader)
984 (dwarf2_compute_name, dwarf2_physname, find_file_and_directory)
985 (read_call_site_scope, namespace_name, guess_full_die_structure_name)
986 (anonymous_struct_prefix, prepare_one_comp_unit): Use
987 dwarf2_string_attr in place of dwarf2_attr and DW_STRING.
989 2015-08-18 Doug Evans <dje@google.com>
990 Adrian Sendroiu <adrian.sendroiu@freescale.com>
993 * cli/cli-logging.c (pop_output_files): Don't restore redirection
995 * mi/mi-out.c: #include "vec.h".
996 (ui_filep): New type.
997 (DEV_VEC_P (ui_filep)): New type.
998 (struct ui_out_data) <buffer, original_buffer>: Delete.
999 (struct ui_out_data) <streams>: New member.
1000 (mi_ui_out_impl): Add data_destroy field.
1001 (mi_field_string, mi_field_fmt): Update.
1002 (mi_flush, mi_redirect, field_separator): Update.
1003 (mi_open, mi_close): Update.
1004 (mi_out_buffered, mi_out_rewind, mi_out_put): Update.
1005 (mi_out_data_ctor, mi_out_data_dtor): New functions.
1006 (mi_out_new): Call mi_out_data_ctor.
1008 2015-08-18 Sandra Loosemore <sandra@codesourcery.com>
1010 * remote.c (strprefix): New.
1011 (remote_parse_stop_reply): Use strprefix instead of strncmp
1012 to ensure exact match of keyword.
1014 2015-08-18 Andrew Burgess <andrew.burgess@embecosm.com>
1016 * gdb_bfd.c (debug_bfd_cache): New variable.
1017 (show_bfd_cache_debug): New function.
1018 (gdb_bfd_open): Add debug logging.
1019 (gdb_bfd_ref): Likewise.
1020 (gdb_bfd_unref): Likewise.
1021 (_initialize_gdb_bfd): Add new set/show command.
1022 * NEWS: Mention new command.
1024 2015-08-18 Andrew Burgess <andrew.burgess@embecosm.com>
1026 * gdb_bfd.c (bfd_sharing): New variable.
1027 (show_bfd_sharing): New function.
1028 (gdb_bfd_open): Check bfd_sharing variable.
1029 (_initialize_gdb_bfd): Add new set/show command.
1030 * NEWS: Mention new command.
1032 2015-08-18 Andrew Burgess <andrew.burgess@embecosm.com>
1034 * gdb_bfd.c (struct gdb_bfd_data): Add size, inode, and device id
1036 (struct gdb_bfd_cache_search): Likewise.
1037 (eq_bfd): Compare the size, inode, and device id fields.
1038 (gdb_bfd_open): Initialise the size, inode, and device id fields.
1039 (gdb_bfd_ref): Likewise.
1040 (gdb_bfd_unref): Likewise.
1042 2015-08-18 Pedro Alves <palves@redhat.com>
1044 * linux-nat.c (linux_nat_always_non_stop_p): If the linux_ops
1045 target implements to_always_non_stop_p, call it.
1046 * x86-linux-nat.c (x86_linux_always_non_stop_p): New function.
1047 (x86_linux_create_target): Install it as to_always_non_stop_p
1050 2015-08-17 Doug Evans <dje@google.com>
1052 * ui-out.c (default_ui_out_impl): Add comment.
1054 2015-08-17 Iain Buclaw <ibuclaw@gdcproject.org>
1056 * d-exp.y (type_aggregate_p): New function.
1057 (PrimaryExpression : TypeExp '.' IdentifierExp): Use it.
1058 (classify_inner_name): Likewise.
1059 * d-namespace.c (d_lookup_nested_symbol): Handle TYPE_CODE_ENUM.
1061 2015-08-15 Doug Evans <xdje42@gmail.com>
1063 * psymtab.c (add_psymbol_to_bcache): Remove "val" arg. All callers
1065 (add_psymbol_to_list): Ditto.
1067 2015-08-15 Doug Evans <xdje42@gmail.com>
1069 * dbxread.c (dbx_end_psymtab): Renamed from end_psymtab. All callers
1070 updated. Call end_psymtab_common.
1071 * dwarf2read.c (process_psymtab_comp_unit_reader): Call
1073 (build_type_psymtabs_reader): Ditto.
1074 * psympriv.h (sort_pst_symbols): Delete.
1075 (end_psymtab_common): Declare.
1076 * psymtab.c (sort_pst_symbols): Make static.
1077 (end_psymtab_common): New function.
1078 * xcoffread.c (xcoff_end_psymtab): Call end_psymtab_common.
1080 2015-08-15 Doug Evans <xdje42@gmail.com>
1082 * defs.h (LANGUAGE_BITS): Define.
1083 * psympriv.h (partial_symbol) <domain>: Use SYMBOL_DOMAIN_BITS.
1084 (partial_symbol) <aclass>: Use SYMBOL_ACLASS_BITS.
1085 * symtab.h (general_symbol_info> <language>: Usage LANGUAGE_BITS.
1086 (minimal_symbol_type): Add nr_minsym_types.
1087 (MINSYM_TYPE_BITS): Define.
1088 (minimal_symbol) <type>: Use MINSYM_TYPE_BITS.
1089 (domain_enum_tag): Add NR_DOMAINS.
1090 (SYMBOL_DOMAIN_BITS): Change from 4 to 3.
1091 (SYMBOL_ACLASS_BITS): Define from 6 to 5.
1093 2015-08-15 Doug Evans <xdje42@gmail.com>
1095 * objfiles.h: Whitespace cleanup.
1096 * psympriv.h: Whitespace cleanup.
1097 * psymtab.c: Whitespace/coding convention cleanup.
1099 2015-08-15 Patrick Palka <patrick@parcs.ath.cx>
1101 * inferior.c (detach_inferior_command): Don't call
1102 any_thread_of_process when pid is 0.
1103 (kill_inferior_command): Likewise.
1105 2015-08-14 Doug Evans <xdje42@gmail.com>
1108 * NEWS: Document new /s modifier for the disassemble command.
1109 * cli/cli-cmds.c (disassemble_command): Add support for /s.
1110 (_initialize_cli_cmds): Update online docs of disassemble command.
1111 * disasm.c: #include "source.h".
1112 (struct deprecated_dis_line_entry): Renamed from dis_line_entry.
1114 (dis_line_entry): New struct.
1115 (hash_dis_line_entry, eq_dis_line_entry): New functions.
1116 (allocate_dis_line_table): New functions.
1117 (maybe_add_dis_line_entry, line_has_code_p): New functions.
1118 (dump_insns): New arg end_pc. All callers updated.
1119 (do_mixed_source_and_assembly_deprecated): Renamed from
1120 do_mixed_source_and_assembly. All callers updated.
1121 (do_mixed_source_and_assembly): New function.
1122 (gdb_disassembly): Handle /s (DISASSEMBLY_SOURCE).
1123 * disasm.h (DISASSEMBLY_SOURCE_DEPRECATED): Renamed from
1124 DISASSEMBLY_SOURCE. All uses updated.
1125 (DISASSEMBLY_SOURCE): New macro.
1126 * mi/mi-cmd-disas.c (mi_cmd_disassemble): New modes 4,5.
1128 2015-08-14 Keith Seitz <keiths@redhat.com>
1130 * d-exp.y (PrimaryExpression : TypeExp '.' IdentifierExp): Rename
1131 `typename' to `type_name' to avoid C++ reserved word.
1133 2015-08-14 Keith Seitz <keiths@redhat.com>
1135 * location.c (EL_TYPE, EL_LINESPEC, EL_PROBE, EL_ADDRESS)
1136 (EL_EXPLICIT, EL_STRING): Change macro parameter to "P" to
1139 2015-08-14 Iain Buclaw <ibuclaw@gdcproject.org>
1141 * d-exp.y (PrimaryExpression : TypeExp '.' IdentifierExp): Use
1142 xstrprintf instead of malloc and sprintf.
1143 (PrimaryExpression : IdentifierExp): Avoid operator at end of line.
1144 (lex_one_token): Likewise.
1146 2015-08-14 Matthew Fortune <matthew.fortune@imgtec.com>
1148 * solib-svr4.c (read_program_header): Add base_addr argument to
1149 report the runtime address of the segment.
1150 (find_program_interpreter): Update read_program_header call to pass
1151 a NULL pointer for the new argument.
1152 (scan_dyntag): Add ptr_addr argument to report the runtime address
1154 (scan_dyntag_auxv): Likewise and use thew new base_addr argument of
1155 read_program_header to get the base address of the dynamic segment.
1156 (elf_locate_base): Update uses of scan_dyntag, scan_dyntag_auxv and
1157 read_program_header.
1158 (elf_locate_base): Scan for and handle DT_MIPS_RLD_MAP_REL.
1160 2015-08-14 Matthew Fortune <matthew.fortune@imgtec.com>
1162 * MAINTAINERS (Write After Approval): Add Matthew Fortune.
1164 2015-08-13 Iain Buclaw <ibuclaw@gdcproject.org>
1166 * d-exp.y (%union): Add voidval.
1167 (%token): Add UNKNOWN_NAME as a token to represent an unclassified
1168 name in the lexing stage.
1169 (PostfixExpression): Move symbol completion handling in grammar here
1170 from PrimaryExpression.
1171 (PrimaryExpression): Move routines to handle resolving identifier
1172 tokens in the grammar here from push_expression_name.
1173 (IdentifierExp): Remove the handling of alternating '.' and identifier
1175 (TypeExp): Allow TypeExp to be wrapped in parenthesis in the grammar.
1176 (BasicType): Remove C-style typename rules.
1177 (d_type_from_name, d_module_from_name, push_variable)
1178 (push_fieldnames, push_type_name, push_module_name)
1179 (push_expression_name): Remove.
1180 (lex_one_token): Rename from yylex. Replace pstate with par_state.
1181 (token_and_value): New type.
1182 (token_fifo, popping, name_obstack): New globals.
1183 (classify_name): New function.
1184 (classify_inner_name): Likewise.
1186 (d_parse): Initialize token_fifo, popping and name_obstack.
1188 2015-08-13 Iain Buclaw <ibuclaw@gdcproject.org>
1190 * Makefile.in (SFILES): Add d-namespace.c.
1191 (COMMON_OBS): Add d-namespace.o.
1192 * d-lang.c (d_language_defn): Use d_lookup_symbol_nonlocal as the
1193 la_lookup_symbol_nonlocal callback function pointer.
1194 * d-lang.h (d_lookup_symbol_nonlocal): New declaration.
1195 (d_lookup_nested_symbol): New declaration.
1196 * d-namespace.c: New file.
1198 2015-08-13 Pedro Alves <palves@redhat.com>
1200 * python/py-unwind.c (pyuw_sniffer): Install the invalidate
1201 cleanup after the decref cleanup, not before.
1203 2015-08-13 Pierre-Marie de Rodat <derodat@adacore.com>
1205 * ada-lang.c: Include namespace.h
1206 (aux_add_nonlocal_symbols): Fix a function name in comment.
1207 (ada_add_block_renamings): New.
1208 (add_nonlocal_symbols): Add global renamings handling.
1209 (ada_lookup_symbol_list_worker): Move the symbol lookup part
1211 (ada_add_all_symbols): ... this new function.
1212 (ada_add_block_symbols): Try to match the input name against the
1213 "using directives list", perform a recursive symbol lookup on
1214 the matched declarations.
1215 * block.h (struct block): Move the_namespace to top-level as
1216 namespace_info. Remove the language_specific field.
1217 (BLOCK_NAMESPACE): Update access to the namespace_info field.
1218 * buildsym.h (using_directives): Rename into...
1219 (local_using_directives): ... this.
1220 (global_using_directives): New.
1221 (struct context_stack): Rename the using_directives field into
1222 local_using_directives.
1223 * buildsym.c (finish_block_internal): Deal with the proper
1224 using directives repository (local or global).
1225 (prepare_for_building): Reset local_using_directives. Assert
1226 that there is no pending global using directive.
1227 (reset_symtab_globals): Reset global_using_directives and
1228 local_using_directives.
1229 (end_symtab_get_static_block): Don't ignore symtabs that have
1230 only using directives.
1231 (push_context): Update references to local_using_directives.
1232 (buildsym_init): Do not reset using_directives.
1233 * cp-support.c: Include namespace.h.
1234 * cp-support.h (struct using_direct): Move to namespace.h.
1235 (cp_add_using_directives): Move to namespace.h.
1236 * cp-namespace.c: Include namespace.h
1237 (cp_add_using_directive): Move to namespace.c, rename it to
1238 add_using_directive, add a "using_directives" argument and use
1239 it as the pending using directives repository. All callers
1241 * dwarf2read.c (using_directives): New.
1242 (read_import_statement): Call using_directives.
1243 (read_func_scope): Update references to local_using_directives.
1244 (read_lexical_block_scope): Likewise.
1245 (read_namespace): Update the heading comment, call
1247 * namespace.h: New file.
1248 * namespace.c: New file.
1249 * Makefile.in (SFILES): Add namespace.c.
1250 (COMMON_OBS): Add namespace.o
1252 2015-08-12 Joel Brobecker <brobecker@adacore.com>
1254 * amd64-tdep.c (amd64_displaced_step_fixup): Fix the mask used to
1257 2015-08-12 Keith Seitz <keiths@redhat.com>
1259 * break-catch-throw.c (re_set_exception_catchpoint) Rename
1260 reserved C++ keyword "explicit" to "explicit_loc".
1261 * breakpoint.c (create_overlay_event_breakpoint)
1262 (create_longjmp_master_breakpoint)
1263 (create_std_terminate_master_breakpoint)
1264 (create_exception_master_breakpoint, update_static_tracepoint):
1265 Rename reserved C++ keyword "explicit" to "explicit_loc".
1266 * completer.c (collect_explicit_location_matches)
1267 (explicit_location_completer): Rename reserved C++ keyword
1268 "explicit" to "explicit_loc".
1269 * linespec.c (struct linespec) <explicit>: Rename to "explicit_loc".
1270 (canonicalize_linespec, create_sals_line_offset)
1271 (convert_linespec_to_sals, convert_explicit_location_to_sals)
1272 (event_location_to_sals, decode_objc): Rename reserved C++ keyword
1273 "explicit" to "explicit_loc".
1274 * location.c (struct event_location) <explicit>: Rename to
1276 (initialize_explicit_location, new_explicit_location)
1277 (explicit_location_to_string_internal, explicit_location_to_linespec):
1278 Rename reserved C++ keyword "explicit" to "explicit_loc".
1279 * location.h (explicit_location_to_string)
1280 (explicit_location_to_linespec, initialize_explicit_location)
1281 (new_explicit_location): Rename reserved C++ keyword "explicit"
1283 * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Rename reserved C++
1284 keyword "explicit" to "explicit_loc".
1286 2015-08-12 Keith Seitz <keiths@redhat.com>
1288 * python/python.c (gdbpy_decode_line): Initialize `location' to NULL
1289 and only call decode_line_1 when it is non-NULL.
1291 2015-08-12 Luis Machado <lgustavo@codesourcery.com>
1293 * breakpoint.c (bp_loc_is_permanent): Return 0 when breakpoint
1294 location address is not meaningful.
1295 (breakpoint_address_is_meaningful): Update comment.
1297 2015-08-11 Keith Seitz <keiths@redhat.com>
1299 * NEWS: Mention explicit locations.
1300 * breakpoint.c [LOCATION_HELP_STRING]: New macro.
1301 [BREAK_ARGS_HELP]: Use LOCATION_HELP_STRING.
1302 (_initialize_breakpoint): Update documentation for
1303 "clear", "break", "trace", "strace", "ftrace", and "dprintf".
1305 2015-08-11 Keith Seitz <keiths@redhat.com>
1307 * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Add support for
1308 explicit locations, options "--source", "--function",
1309 "--label", and "--line".
1311 2015-08-11 Keith Seitz <keiths@redhat.com>
1313 * completer.c: Include location.h.
1314 (enum match_type): New enum.
1315 (location_completer): Rename to ...
1316 (linespec_completer): ... this.
1317 (collect_explicit_location_matches, backup_text_ptr)
1318 (explicit_location_completer): New functions.
1319 (location_completer): "New" function; handle linespec
1320 and explicit location completions.
1321 (complete_line_internal): Remove all location completer-specific
1323 * linespec.c (linespec_lexer_lex_keyword, is_ada_operator)
1324 (find_toplevel_char): Export.
1325 (linespec_parse_line_offset): Export.
1326 Issue error if STRING is not numerical.
1327 (gdb_get_linespec_parser_quote_characters): New function.
1328 * linespec.h (linespec_parse_line_offset): Declare.
1329 (get_gdb_linespec_parser_quote_characters): Declare.
1330 (is_ada_operator): Declare.
1331 (find_toplevel_char): Declare.
1332 (linespec_lexer_lex_keyword): Declare.
1333 * location.c (explicit_to_event_location): New function.
1334 (explicit_location_lex_one): New function.
1335 (string_to_explicit_location): New function.
1336 (string_to_event_location): Handle explicit locations.
1337 * location.h (explicit_to_event_location): Declare.
1338 (string_to_explicit_location): Declare.
1340 2015-08-11 Keith Seitz <keiths@redhat.com>
1342 * break-catch-throw.c (re_set_exception_catchpoint): Convert
1343 linespec into explicit location.
1344 * breakpoint.c (create_overlay_breakpoint)
1345 (create_longjmp_master_breakpoint)
1346 (create_std_terminate_master_breakpoint)
1347 (create_exception_master_breakpoint): Convert linespec into explicit
1349 (update_static_tracepoint): Convert linespec into explicit location.
1350 * linespec.c (enum offset_relative_sign, struct line_offset): Move
1352 (struct linespec) <expression, expr_pc, source_filename>
1353 <function_name, label_name, line_offset>: Replace with ...
1354 <explicit>: ... this.
1355 <is_linespec>: New member.
1356 (PARSER_EXPLICIT): New accessor macro.
1357 (undefined_label_error): New function.
1358 (source_file_not_found_error): New function.
1359 (linespec_parse_basic): The parser result is now an explicit location.
1360 Use PARSER_EXPLICIT to access it.
1361 Use undefined_label_error.
1362 (canonicalize_linespec): Convert canonical linespec into explicit
1364 Move string representation of location to explicit_location_to_linespec
1365 and use it and explicit_location_to_string to save string
1366 representations of the canonical location.
1367 (create_sals_line_offset, convert_linespec_to_sals): `ls' contains an
1368 explicit location. Update all references.
1369 (convert_explicit_location_to_sals): New function.
1370 (parse_linespec): Use PARSER_EXPLICIT to access the parser
1371 result's explicit location.
1372 (linespec_state_constructor): Initialize is_linespec.
1373 Use PARSER_EXPLICIT.
1374 (linespec_parser_delete): Use PARSER_EXPLICIT to access the parser's
1376 (event_location_to_sals): For linespec locations, set is_linespec.
1377 Handle explicit locations.
1378 (decode_objc): 'ls' contains an explicit location now. Update all
1380 (symtabs_from_filename): Use source_file_not_found_error.
1381 * location.c (struct event_location.u) <explicit>: New member.
1382 (initialize_explicit_location): New function.
1383 (initialize_event_location): Initialize explicit locations.
1384 (new_explicit_location, get_explicit_location)
1385 (get_explicit_location_const): New functions.
1386 (explicit_to_string_internal): New function; most of contents moved
1387 from canonicalize_linespec.
1388 (explicit_location_to_string): New function.
1389 (explicit_location_to_linespec): New function.
1390 (copy_event_location, delete_event_location)
1391 (event_location_to_string_const, event_location_empty_p): Handle
1393 * location.h (enum offset_relative_sign, struct line_offset): Move
1394 here from linespec.h.
1395 (enum event_location_type): Add EXPLICIT_LOCATION.
1396 (struct explicit_location): New structure.
1397 (explicit_location_to_string): Declare.
1398 (explicit_location_to_linespec): Declare.
1399 (new_explicit_location, get_explicit_locationp
1400 (get_explicit_location_const, initialize_explicit_location): Declare.
1402 2015-08-11 Keith Seitz <keiths@redhat.com>
1404 * break-catch-throw.c (re_set_exception_catchpoint): Convert
1405 linespec for stap probe to probe location.
1406 * breakpoint.c (create_longjmp_master_breakpoint)
1407 (create_exception_master_breakpoint): Likewise.
1408 (break_command_1): Remove local variable `arg_cp'.
1409 Check location type to set appropriate breakpoint ops methods.
1410 (trace_command): Likewise.
1411 * linespec.c (event_location_to_sals): Assert on probe locations.
1412 * location.c (EL_PROBE): Add macro definition.
1413 (new_probe_location, get_probe_location): New functions.
1414 (copy_event_location, delete_event_location, event_location_to_string)
1415 (string_to_event_location, event_location_empty_p): Handle probe
1417 * location.h (enum event_location_type): Add PROBE_LOCATION.
1418 (new_probe_location, get_probe_location): Declare.
1419 * probe.c (parse_probes): Assert that LOCATION is a probe location.
1420 Convert linespec into probe location.
1422 2015-08-11 Keith Seitz <keiths@redhat.com>
1424 * breakpoint.c (create_thread_event_breakpoint, init_breakpoint_sal):
1425 Convert linespec to address location.
1426 * linespec.c (canonicalize_linespec): Do not handle address
1428 (convert_address_location_to_sals): New function; contents moved
1430 (convert_linespc_to_sals): ... here.
1431 (parse_linespec): Remove address locations from linespec grammar.
1432 Remove handling of address locations.
1433 (linespec_lex_to_end): Remove handling of address linespecs.
1434 (event_location_to_sals): Handle ADDRESS_LOCATION.
1435 (linespec_expression_to_pc): Export.
1436 * linespec.h (linespec_expression_to_pc): Add declaration.
1437 * location.c (struct event_location.u) <address>: New member.
1438 (new_address_location, get_address_location): New functions.
1439 (copy_event_location, delete_event_location, event_location_to_string)
1440 (string_to_event_location, event_location_empty_p): Handle address
1442 * location.h (enum event_location_type): Add ADDRESS_LOCATION.
1443 (new_address_location, get_address_location): Declare.
1444 * python/py-finishbreakpoint.c (bpfinishpy_init): Convert linespec
1445 to address location.
1446 * spu-tdep.c (spu_catch_start): Likewise.
1448 2015-08-11 Keith Seitz <keiths@redhat.com>
1450 * ax-gdb.c: Include location.h.
1451 (agent_command_1) Use linespec location instead of address
1453 * break-catch-throw.c: Include location.h.
1454 (re_set_exception_catchpoint): Use linespec locations instead
1456 * breakpoint.c: Include location.h.
1457 (create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
1458 (create_std_terminate_master_breakpoint)
1459 (create_exception_master_breakpoint, update_breakpoints_after_exec):
1460 Use linespec location instead of address string.
1461 (print_breakpoint_location): Use locations and
1462 event_location_to_string.
1463 Print extra_string for pending locations for non-MI streams.
1464 (print_one_breakpoint_location): Use locations and
1465 event_location_to_string.
1466 (init_raw_breakpoint_without_location): Initialize b->location.
1467 (create_thread_event_breakpoint): Use linespec location instead of
1469 (init_breakpoint_sal): Likewise.
1470 Only save extra_string if it is non-NULL and not the empty string.
1471 Use event_location_to_string instead of `addr_string'.
1472 Constify `p' and `endp'.
1473 Use skip_spaces_const/skip_space_const instead of non-const versions.
1474 Copy the location into the breakpoint.
1475 If LOCATION is NULL, save the breakpoint address as a linespec location
1476 instead of an address string.
1477 (create_breakpoint_sal): Change `addr_string' parameter to a struct
1478 event_location. All uses updated.
1479 (create_breakpoints_sal): Likewise for local variable `addr_string'.
1480 (parse_breakpoint_sals): Use locations instead of address strings.
1481 Remove check for empty linespec with conditional.
1483 (decode_static_tracepoint_spec): Make argument const and update
1485 (create_breakpoint): Change `arg' to a struct event_location and
1487 Remove `copy_arg' and `addr_start'.
1488 If EXTRA_STRING is empty, set it to NULL.
1489 Don't populate `canonical' for pending breakpoints.
1490 Pass `extra_string' to find_condition_and_thread.
1491 Clear `extra_string' if `rest' was NULL.
1492 Do not error with "garbage after location" if setting a dprintf
1494 Copy the location into the breakpoint instead of an address string.
1495 (break_command_1): Use string_to_event_location and pass this to
1496 create_breakpoint instead of an address string.
1497 Check against `arg_cp' for a probe linespec.
1498 (dprintf_command): Use string_to_event_location and pass this to
1499 create_breakpoint instead of an address string.
1500 Throw an exception if no format string was specified.
1501 (print_recreate_ranged_breakpoint): Use event_location_to_string
1502 instead of address strings.
1503 (break_range_command, until_break_command)
1504 (init_ada_exception_breakpoint): Use locations instead
1506 (say_where): Print out extra_string for pending locations.
1507 (base_breakpoint_dtor): Delete `location' and `location_range_end' of
1509 (base_breakpoint_create_sals_from_location): Use struct event_location
1510 instead of address string.
1511 Remove `addr_start' and `copy_arg' parameters.
1512 (base_breakpoint_decode_location): Use struct event_location instead of
1514 (bkpt_re_set): Use locations instead of address strings.
1515 Use event_location_empty_p to check for unset location.
1516 (bkpt_print_recreate): Use event_location_to_string instead of
1518 Print out extra_string for pending locations.
1519 (bkpt_create_sals_from_location, bkpt_decode_location)
1520 (bkpt_probe_create_sals_from_location): Use struct event_location
1521 instead of address string.
1522 (bkpt_probe_decode_location): Use struct event_location instead of
1524 (tracepoint_print_recreate): Use event_location_to_string to
1525 recreate the tracepoint.
1526 (tracepoint_create_sals_from_location, tracepoint_decode_location)
1527 (tracepoint_probe_create_sals_from_location)
1528 (tracepoint_probe_decode_location): Use struct event_location
1529 instead of address string.
1530 (dprintf_print_recreate): Use event_location_to_string to recreate
1532 (dprintf_re_set): Remove check for valid/missing format string.
1533 (strace_marker_create_sals_from_location)
1534 (strace_marker_create_breakpoints_sal, strace_marker_decode_location)
1535 (update_static_tracepoint): Use struct event_location instead of
1537 (location_to_sals): Likewise.
1538 Pass `extra_string' to find_condition_and_thread.
1539 For newly resolved pending breakpoint locations, clear the location's
1540 string representation.
1541 Assert that the breakpoint's condition string is NULL when
1542 condition_not_parsed.
1543 (breakpoint_re_set_default, create_sals_from_location_default)
1544 (decode_location_default, trace_command, ftrace_command)
1545 (strace_command, create_tracepoint_from_upload): Use locations
1546 instead of address strings.
1547 * breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
1548 Use struct event_location instead of address string.
1550 <decode_location>: Likewise.
1551 (struct breakpoint) <addr_string>: Change to struct event_location
1552 and rename `location'.
1553 <addr_string_range_end>: Change to struct event_location and rename
1554 `location_range_end'.
1555 (create_breakpoint): Use struct event_location instead of address
1557 * cli/cli-cmds.c: Include location.h.
1558 (edit_command, list_command): Use locations instead of address strings.
1559 * elfread.c: Include location.h.
1560 (elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
1561 * guile/scm-breakpoint.c: Include location.h.
1562 (bpscm_print_breakpoint_smob): Use event_location_to_string.
1563 (gdbscm_register_breakpoint): Use locations instead of address
1565 * linespec.c: Include location.h.
1566 (struct ls_parser) <stream>: Change to const char *.
1567 (PARSER_STREAM): Update.
1568 (lionespec_lexer_lex_keyword): According to find_condition_and_thread,
1569 keywords must be followed by whitespace.
1570 (canonicalize_linespec): Save a linespec location into `canonical'.
1571 Save a canonical linespec into `canonical'.
1572 (parse_linespec): Change `argptr' to const char * and rename `arg'.
1574 Update function description.
1575 (linespec_parser_new): Initialize `parser'.
1576 Update initialization of parsing stream.
1577 (event_location_to_sals): New function.
1578 (decode_line_full): Change `argptr' to a struct event_location and
1579 rename it `location'.
1580 Use locations instead of address strings.
1581 Call event_location_to_sals instead of parse_linespec.
1582 (decode_line_1): Likewise.
1583 (decode_line_with_current_source, decode_line_with_last_displayed)
1584 Use locations instead of address strings.
1585 (decode_objc): Likewise.
1586 Change `argptr' to const char * and rename `arg'.
1587 (destroy_linespec_result): Delete the linespec result's location
1588 instead of freeing the address string.
1589 * linespec.h (struct linespec_result) <addr_string>: Change to
1590 struct event_location and rename to ...
1591 <location>: ... this.
1592 (decode_line_1, decode_line_full): Change `argptr' to struct
1593 event_location. All callers updated.
1594 * mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
1595 (mi_cmd_break_insert_1): Use locations instead of address strings.
1596 Throw an error if there was "garbage" at the end of the specified
1598 * probe.c: Include location.h.
1599 (parse_probes): Change `argptr' to struct event_location.
1600 Use event locations instead of address strings.
1601 * probe.h (parse_probes): Change `argptr' to struct event_location.
1602 * python/py-breakpoint.c: Include location.h.
1603 (bppy_get_location): Constify local variable `str'.
1604 Use event_location_to_string.
1605 (bppy_init): Use locations instead of address strings.
1606 * python/py-finishbreakpoint.c: Include location.h.
1607 (bpfinishpy_init): Remove local variable `addr_str'.
1608 Use locations instead of address strings.
1609 * python/python.c: Include location.h.
1610 (gdbpy_decode_line): Use locations instead of address strings.
1611 * remote.c: Include location.h.
1612 (remote_download_tracepoint): Use locations instead of address
1614 * spu-tdep.c: Include location.h.
1615 (spu_catch_start): Remove local variable `buf'.
1616 Use locations instead of address strings.
1617 * tracepoint.c: Include location.h.
1618 (scope_info): Use locations instead of address strings.
1619 (encode_source_string): Constify parameter `src'.
1620 * tracepoint.h (encode_source_string): Likewise.
1622 2015-08-11 Keith Seitz <keiths@redhat.com>
1624 * Makefile.in (SFILES): Add location.c.
1625 (HFILES_NO_SRCDIR): Add location.h.
1626 (COMMON_OBS): Add location.o.
1627 * linespec.c (linespec_lex_to_end): New function.
1628 * linespec.h (linespec_lex_to_end): Declare.
1629 * location.c: New file.
1630 * location.h: New file.
1632 2015-08-11 Keith Seitz <keiths@redhat.com>
1634 * breakpoint.h (struct breakpoint_ops) <create_sals_from_address>:
1635 Renamed to create_sals_from_location.
1636 <decode_linespec>: Renamed to decode_location.
1638 * breakpoint.c (create_sals_from_address_default): Renamed to ...
1639 (create_sals_from_location_default): ... this.
1640 (addr_string_to_sals): Renamed to ...
1641 (location_to_sals): ... this.
1642 (decode_linespec_default): Renamed to ...
1643 (decode_location_default): ... this.
1644 (base_breakpoint_create_sals_from_address): Renamed to ...
1645 (base_breakpoint_create_sals_from_location): ... this.
1646 (bkpt_create_sals_from_address): Renamed to ...
1647 (bkpt_create_sals_from_location): ... this.
1648 (bkpt_decode_linespec): Renamed to ...
1649 (bkpt_decode_location): ... this.
1650 (bkpt_probe_create_sals_from_address): Renamed to ...
1651 (bkpt_probe_create_sals_from_location): ... this.
1652 (tracepoint_create_sals_from_address): Renamed to ...
1653 (tracepoint_create_sals_from_location): ... this.
1654 (tracepoint_decode_linespec): Renamed to ...
1655 (tracepoint_decode_location): ... this.
1656 (tracepoint_probe_create_sals_from_address): Renamed to ...
1657 (tracepoint_probe_create_sals_from_location): ... this.
1658 (tracepoint_probe_decode_linespec): Renamed to ...
1659 (tracepoint_probe_decode_location): ... this.
1660 (strace_marker_create_sals_from_address): Renamed to ...
1661 (strace_marker_create_sals_from_location): ... this.
1662 (decode_linespec_default): Renamed to ...
1663 (decode_location_default): ... this.
1665 2015-08-10 Doug Evans <dje@google.com>
1666 Keith Seitz <keiths@redhat.com>
1669 * symtab.c (make_file_symbol_completion_list_1): Renamed from
1670 make_file_symbol_completion_list and made static.
1671 (make_file_symbol_completion_list): New function.
1673 2015-08-10 Joel Brobecker <brobecker@adacore.com>
1675 * infrun.c (follow_fork, displaced_step_prepare, resume): Remove
1676 trailing new-line at end of warning message.
1677 (proceed): Add i18n marker to error messages.
1679 2015-08-07 Pedro Alves <palves@redhat.com>
1681 * linux-nat.c (linux_nat_always_non_stop_p): Return 1.
1683 2015-08-07 Pedro Alves <palves@redhat.com>
1685 * s390-linux-tdep.c (is_non_branch_ril)
1686 (s390_displaced_step_copy_insn): New functions.
1687 (s390_displaced_step_fixup): Update comment.
1688 (s390_gdbarch_init): Install s390_displaced_step_copy_insn as
1689 gdbarch_displaced_step_copy_insn hook.
1691 2015-08-07 Pedro Alves <palves@redhat.com>
1693 * infrun.c (displaced_step_prepare_throw): Return -1 if
1694 gdbarch_displaced_step_copy_insn returns NULL. Update intro
1696 * rs6000-tdep.c (LWARX_MASK, LWARX_INSTRUCTION, LDARX_INSTRUCTION)
1697 (STWCX_MASK, STWCX_INSTRUCTION, STDCX_INSTRUCTION): Move higher up
1699 (ppc_displaced_step_copy_insn): New function.
1700 (ppc_displaced_step_fixup): Update comment.
1701 (rs6000_gdbarch_init): Install ppc_displaced_step_copy_insn as
1702 gdbarch_displaced_step_copy_insn hook.
1703 * gdbarch.sh (displaced_step_copy_insn): Document what happens on
1705 * gdbarch.h: Regenerate.
1707 2015-08-07 Pedro Alves <palves@redhat.com>
1709 * inferior.h (struct inferior) <displaced_stepping_failed>: New
1711 * infrun.c (use_displaced_stepping_now_p): New parameter 'inf'.
1712 Return false if dispaced stepping failed before.
1713 (resume): Pass the current inferior to
1714 use_displaced_stepping_now_p. Wrap displaced_step_prepare in
1715 TRY/CATCH. If we get a MEMORY_ERROR, set the inferior's
1716 displaced_stepping_failed flag, and fall back to an in-line
1719 2015-08-07 Pedro Alves <palves@redhat.com>
1721 * darwin-nat.c (darwin_stop): Rename to ...
1722 (darwin_interrupt): ... this.
1723 (_initialize_darwin_inferior): Adjust.
1724 * gnu-nat.c (gnu_stop): Delete.
1725 (gnu_target): Don't install gnu_stop.
1726 * inf-ptrace.c (inf_ptrace_stop): Rename to ...
1727 (inf_ptrace_interrupt): ... this.
1728 (inf_ptrace_target): Adjust.
1729 * infcmd.c (interrupt_target_1): Use target_interrupt instead of
1731 * linux-nat (linux_nat_stop): Rename to ...
1732 (linux_nat_interrupt): ... this.
1733 (linux_nat_stop): Reimplement.
1734 (linux_nat_add_target): Install linux_nat_interrupt.
1735 * nto-procfs.c (nto_interrupt_twice): Rename to ...
1736 (nto_handle_sigint_twice): ... this.
1737 (nto_interrupt): Rename to ...
1738 (nto_handle_sigint): ... this. Call target_interrupt instead of
1740 (procfs_wait): Adjust.
1741 (procfs_stop): Rename to ...
1742 (procfs_interrupt): ... this.
1743 (init_procfs_targets): Adjust.
1744 * procfs.c (procfs_stop): Rename to ...
1745 (procfs_interrupt): ... this.
1746 (procfs_target): Adjust.
1747 * remote-m32r-sdi.c (m32r_stop): Rename to ...
1748 (m32r_interrupt): ... this.
1749 (init_m32r_ops): Adjust.
1750 * remote-sim.c (gdbsim_stop_inferior): Rename to ...
1751 (gdbsim_interrupt_inferior): ... this.
1752 (gdbsim_stop): Rename to ...
1753 (gdbsim_interrupt): ... this.
1754 (gdbsim_cntrl_c): Adjust.
1755 (init_gdbsim_ops): Adjust.
1756 * remote.c (sync_remote_interrupt): Adjust comments.
1757 (remote_stop_as): Rename to ...
1758 (remote_interrupt_as): ... this.
1759 (remote_stop): Adjust comment.
1760 (remote_interrupt): New function.
1761 (init_remote_ops): Install remote_interrupt.
1762 * target.c (target_interrupt): New function.
1763 * target.h (struct target_ops) <to_interrupt>: New field.
1764 (target_interrupt): New declaration.
1765 * windows-nat.c (windows_stop): Rename to ...
1766 (windows_interrupt): ... this.
1767 * target-delegates.c: Regenerate.
1769 2015-08-07 Pedro Alves <palves@redhat.com>
1771 * signal-while-stepping-over-bp-other-thread.exp: Expect "restart
1772 threads" as alternative to "switching back to stepped thread".
1774 2015-08-07 Pedro Alves <palves@redhat.com>
1776 * NEWS: Mention "maint set/show target-non-stop".
1777 * breakpoint.c (update_global_location_list): Check
1778 target_is_non_stop_p instead of non_stop.
1779 * infcmd.c (attach_command_post_wait, attach_command): Likewise.
1780 * infrun.c (show_can_use_displaced_stepping)
1781 (can_use_displaced_stepping_p, start_step_over_inferior):
1783 (internal_resume_ptid): New function.
1785 (proceed): Check target_is_non_stop_p instead of non_stop. If in
1786 all-stop mode but the target is always in non-stop mode, start all
1787 the other threads that are implicitly resumed too.
1788 (for_each_just_stopped_thread, fetch_inferior_event)
1789 (adjust_pc_after_break, stop_all_threads): Check
1790 target_is_non_stop_p instead of non_stop.
1791 (handle_inferior_event): Likewise. Handle detach-fork in all-stop
1792 with the target always in non-stop mode.
1793 (handle_signal_stop) <random signal>: Check target_is_non_stop_p
1794 instead of non_stop.
1795 (switch_back_to_stepped_thread): Check target_is_non_stop_p
1796 instead of non_stop.
1797 (keep_going_stepped_thread): Use internal_resume_ptid.
1798 (stop_waiting): If in all-stop mode, and the target is in non-stop
1799 mode, stop all threads.
1800 (keep_going_pass): Likewise, when starting a new in-line step-over
1802 * linux-nat.c (get_pending_status, select_event_lwp)
1803 (linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check
1804 target_is_non_stop_p instead of non_stop.
1805 (linux_nat_always_non_stop_p): New function.
1806 (linux_nat_stop): Check target_is_non_stop_p instead of non_stop.
1807 (linux_nat_add_target): Install linux_nat_always_non_stop_p.
1808 * target-delegates.c: Regenerate.
1809 * target.c (target_is_non_stop_p): New function.
1810 (target_non_stop_enabled, target_non_stop_enabled_1): New globals.
1811 (maint_set_target_non_stop_command)
1812 (maint_show_target_non_stop_command): New functions.
1813 (_initilize_target): Install "maint set/show target-non-stop"
1815 * target.h (struct target_ops) <to_always_non_stop_p>: New field.
1816 (target_non_stop_enabled): New declaration.
1817 (target_is_non_stop_p): New declaration.
1819 2015-08-07 Pedro Alves <pedro@codesourcery.com>
1821 * breakpoint.c (breakpoints_should_be_inserted_now): If any thread
1822 has a pending status, return true.
1823 * gdbthread.h: Include target/waitstatus.h.
1824 (struct thread_suspend_state) <stop_reason, waitstatus_pending_p,
1825 stop_pc>: New fields.
1826 (struct thread_info) <resumed>: New field.
1827 (set_resumed): Declare.
1828 * infrun.c: Include "event-loop.h".
1829 (infrun_async_inferior_event_token, infrun_is_async): New globals.
1830 (infrun_async): New function.
1831 (clear_step_over_info): Add debug output.
1832 (displaced_step_in_progress_any_inferior): New function.
1833 (displaced_step_fixup): New returns int.
1834 (start_step_over): Handle in-line step-overs too. Assert the
1835 thread is marked resumed.
1836 (resume_cleanups): Clear the thread's resumed flag.
1837 (resume): Set the thread's resumed flag. Return early if the
1838 thread has a pending status. Allow stepping a breakpoint with no
1840 (proceed): Adjust to check 'resumed' instead of 'executing'.
1841 (clear_proceed_status_thread): If the thread has a pending status,
1842 and that status is a finished step, discard the pending status.
1843 (clear_proceed_status): Don't clear step_over_info here.
1844 (random_pending_event_thread, do_target_wait): New functions.
1845 (prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use
1847 (wait_one): New function.
1848 (THREAD_STOPPED_BY): New macro.
1849 (thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
1850 (thread_stopped_by_hw_breakpoint): New functions.
1851 (switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New
1853 (handle_inferior_event): Also call set_resumed(false) on all
1854 threads implicitly stopped by the event.
1855 (restart_threads, resumed_thread_with_pending_status): New
1857 (finish_step_over): If we were doing an in-line step-over before,
1858 and no longer are after trying to start a new step-over, restart
1859 all threads. If we have multiple threads with pending events,
1860 save the current event and go through the event loop again.
1861 (handle_signal_stop): Return early if finish_step_over returns
1863 <random signal>: If we get a signal while stepping over a
1864 breakpoint in-line in non-stop mode, restart all threads. Clear
1865 step_over_info before delivering the signal.
1866 (keep_going_stepped_thread): Use internal_error instead of
1867 gdb_assert. Mark the thread as resumed.
1868 (keep_going_pass_signal): Assert the thread isn't already resumed.
1869 If some other thread is doing an in-line step-over, defer the
1870 resume. If we just started a new in-line step-over, stop all
1871 threads. Don't clear step_over_info.
1872 (infrun_async_inferior_event_handler): New function.
1873 (_initialize_infrun): Create async event handler with
1874 infrun_async_inferior_event_handler as callback.
1875 (infrun_async): New declaration.
1876 * target.c (target_async): New function.
1877 * target.h (target_async): Declare macro and readd as function
1879 * target/waitstatus.h (enum target_stop_reason)
1880 <TARGET_STOPPED_BY_SINGLE_STEP>: New value.
1881 * thread.c (new_thread): Clear the new waitstatus field.
1882 (set_resumed): New function.
1884 2015-08-07 Pedro Alves <palves@redhat.com>
1886 * infrun.c (keep_going_stepped_thread): New function, factored out
1888 (switch_back_to_stepped_thread): ... here.
1890 2015-08-07 Pedro Alves <palves@redhat.com>
1892 * infrun.c (currently_stepping): Extend intro comment.
1893 * target.h (target_resume): Extend intro comment.
1895 2015-08-07 Pedro Alves <palves@redhat.com>
1897 * infrun.c (switch_back_to_stepped_thread): Use ecs->ptid instead
1898 of inferior_ptid. If the stepped thread vanished, return 0
1899 instead of resuming here. Use reset_ecs. Print the prev_pc and
1900 the current stop_pc in log message. Clear trap_expected if the
1901 thread advanced. Don't pass currently_stepping to
1904 2015-08-07 Pedro Alves <palves@redhat.com>
1906 * gdbthread.h (struct thread_info) <prev_pc>: Extend comment.
1907 * infrun.c (struct execution_control_state): Move higher up in the
1909 (reset_ecs): New function.
1910 (start_step_over): Now returns int. Rewrite to use
1911 keep_going_pass_signal instead of manually starting a displaced step.
1912 (resume): Don't call set_running here. If displaced stepping
1913 can't start now, clear trap_expected.
1914 (find_thread_needs_step_over): Delete function.
1915 (proceed): Set up finish_thread_state_cleanup. Call set_running.
1916 If the current thread needs a step over, push it in the step-over
1917 chain. Don't set insert breakpoints nor call resume directly
1918 here. Instead rewrite to use start_step_over and
1919 keep_going_pass_signal.
1920 (finish_step_over): New function.
1921 (handle_signal_stop): Call finish_step_over instead of
1923 (switch_back_to_stepped_thread): If the event thread needs another
1924 step-over do that first. Use start_step_over.
1925 (keep_going_pass_signal): New function, factored out from ...
1926 (keep_going): ... here.
1927 (_initialize_infrun): Comment moved here.
1928 * thread.c (set_running_thread): New function.
1929 (set_running, finish_thread_state): Use set_running_thread.
1931 2015-08-07 Pedro Alves <palves@redhat.com>
1933 * gdbthread.h (struct thread_info) <step_over_prev,
1934 step_over_next>: New fields.
1935 (thread_step_over_chain_enqueue, thread_step_over_chain_remove)
1936 (thread_step_over_chain_next, thread_is_in_step_over_chain): New
1938 * infrun.c (struct displaced_step_request): Delete.
1939 (struct displaced_step_inferior_state) <step_request_queue>:
1941 (displaced_step_prepare): Assert that trap_expected is set. Use
1942 thread_step_over_chain_enqueue. Split starting a new displaced
1944 (start_step_over): ... this new function.
1945 (resume): Assert the thread isn't waiting for a step over already.
1946 (proceed): Assert the thread isn't waiting for a step over
1948 (infrun_thread_stop_requested): Adjust to remove threads from the
1949 embedded step-over chain.
1950 (handle_inferior_event) <fork/vfork>: Call start_step_over after
1951 displaced_step_fixup.
1952 (handle_signal_stop): Call start_step_over after
1953 displaced_step_fixup.
1954 * infrun.h (step_over_queue_head): New declaration.
1955 * thread.c (step_over_chain_enqueue, step_over_chain_remove)
1956 (thread_step_over_chain_next, thread_is_in_step_over_chain)
1957 (thread_step_over_chain_enqueue)
1958 (thread_step_over_chain_remove): New functions.
1959 (delete_thread_1): Remove thread from the step-over chain.
1961 2015-08-07 Pedro Alves <palves@redhat.com>
1963 * infrun.c (thread_still_needs_step_over): Rename to ...
1964 (thread_still_needs_step_over_bp): ... this.
1965 (enum step_over_what): New.
1966 (thread_still_needs_step_over): Reimplement.
1968 2015-08-07 Pedro Alves <palves@redhat.com>
1970 * remote.c (remote_wait_as): If not waiting for a stop reply,
1971 return TARGET_WAITKIND_NO_RESUMED. If TARGET_WNOHANG is
1972 requested, don't block waiting forever.
1974 2015-08-07 Pedro Alves <pedro@codesourcery.com>
1976 * infrun.c (adjust_pc_after_break): Now takes thread_info and
1977 waitstatus pointers instead of an ecs. Adjust.
1978 (handle_inferior_event): Adjust caller.
1980 2015-08-07 Pedro Alves <palves@redhat.com>
1982 * infrun.c (handle_inferior_event): If we get
1983 TARGET_WAITKIND_SIGNALLED or TARGET_WAITKIND_EXITED in non-stop
1984 mode, mark all threads of the exiting process as not-executing.
1985 (normal_stop): If we get TARGET_WAITKIND_SIGNALLED or
1986 TARGET_WAITKIND_EXITED in non-stop mode, finish all threads of the
1987 exiting process, if inferior_ptid still points at a process.
1988 * thread.c (struct current_thread_cleanup) <next>: New field.
1989 (current_thread_cleanup_chain): New global.
1990 (restore_current_thread_ptid_changed): New function.
1991 (restore_current_thread_cleanup_dtor): Remove the cleanup from the
1992 current_thread_cleanup_chain list.
1993 (make_cleanup_restore_current_thread): Add the cleanup data to the
1994 current_thread_cleanup_chain list.
1995 (_initialize_thread): Install restore_current_thread_ptid_changed
1996 as thread_ptid_changed observer.
1998 2015-08-07 Joel Brobecker <brobecker@adacore.com>
2000 * dtrace-probe.c (dtrace_process_dof): Ignore the objfile's DOF
2001 data if a DTRACE_DOF_SECT_TYPE_PROVIDER section is found to be
2002 smaller than expected.
2004 2015-08-07 Andrew Burgess <andrew.burgess@embecosm.com>
2006 * stack.c (get_frame_language): Moved ...
2007 * frame.c (get_frame_language): ... to here.
2008 * language.h (get_frame_language): Declaration moved to frame.h.
2009 * frame.h: Add language.h include, for language enum.
2010 (get_frame_language): Declaration moved from language.h.
2011 * language.c: Add frame.h include.
2012 * top.c: Add frame.h include.
2013 * symtab.h (struct obj_section): Declare.
2014 (struct cmd_list_element): Declare.
2016 2015-08-07 Andrew Burgess <andrew.burgess@embecosm.com>
2018 * language.c (show_language_command): Find selected frame before
2019 asking for the language of that frame.
2020 (set_language_command): Likewise.
2021 * language.h (get_frame_language): Add frame parameter.
2022 * stack.c (get_frame_language): Add frame parameter, assert
2023 parameter is not NULL, update comment and reindent.
2024 * top.c (check_frame_language_change): Pass the selected frame
2025 into get_frame_language.
2027 2015-08-07 Markus Metzger <markus.t.metzger@intel.com>
2029 * btrace.c (btrace_compute_ftrace_bts): Clear insn flags.
2030 (pt_btrace_insn_flags): New.
2031 (ftrace_add_pt): Call pt_btrace_insn_flags.
2032 * btrace.h (btrace_insn_flag): New.
2033 (btrace_insn) <flags>: New.
2034 * record-btrace.c (btrace_insn_history): Print insn prefix.
2035 * NEWS: Announce it.
2037 2015-08-07 Markus Metzger <markus.t.metzger@intel.com>
2039 * configure.ac: Check for PERF_ATTR_SIZE_VER5 in linux/perf_event.h
2040 * configure: Regenerate.
2042 2015-08-06 Yaakov Selkowitz <yselkowi@redhat.com>
2044 * Makefile.in (LIBICONV): Define.
2045 (CLIBS): Add LIBICONV.
2046 * acinclude.m4: Use config/iconv.m4 instead of custom AM_ICONV.
2047 * configure: Regenerate.
2049 2015-08-06 Simon Marchi <simon.marchi@ericsson.com>
2050 Pedro Alves <palves@redhat.com>
2052 * arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
2053 (arm_set_abi): Likewise.
2054 * ax-general.c (ax_print): Likewise.
2055 * c-exp.y (exp : string_exp): Likewise.
2056 * compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
2057 (do_compile_dwarf_expr_to_c): Likewise.
2058 * cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
2060 * dwarf2expr.c (execute_stack_op): Likewise.
2061 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
2062 (disassemble_dwarf_expression): Likewise.
2063 * dwarf2read.c (dwarf2_add_member_fn): Likewise.
2064 (read_array_order): Likewise.
2065 (abbrev_table_read_table): Likewise.
2066 (read_attribute_value): Likewise.
2067 (skip_unknown_opcode): Likewise.
2068 (dwarf_decode_macro_bytes): Likewise.
2069 (dwarf_decode_macros): Likewise.
2070 * eval.c (value_f90_subarray): Likewise.
2071 * guile/scm-param.c (gdbscm_make_parameter): Likewise.
2072 * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
2073 * infrun.c (handle_command): Likewise.
2074 * memory-map.c (memory_map_start_memory): Likewise.
2075 * osabi.c (set_osabi): Likewise.
2076 * parse.c (operator_length_standard): Likewise.
2077 * ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
2078 single return point.
2079 * python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
2080 * python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
2081 (gdbpy_lookup_global_symbol): Likewise.
2082 * record-full.c (record_full_restore): Likewise.
2083 * regcache.c (regcache_register_status): Likewise.
2084 (regcache_raw_read): Likewise.
2085 (regcache_cooked_read): Likewise.
2086 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
2087 * symtab.c (initialize_ordinary_address_classes): Likewise.
2088 * target-debug.h (target_debug_print_signals): Likewise.
2089 * utils.c (do_restore_current_language): Likewise.
2091 2015-08-06 Clem Dickey <clemd@acm.org>
2094 * python/lib/gdb/command/type_printers.py (InfoTypePrinter): Fix typo.
2096 2015-08-06 Simon Marchi <simon.marchi@ericsson.com>
2098 * complaints.c (enum complaint_series): Add newlines and remove
2099 out of date comment.
2100 (struct complaints) <series>: Change type to enum
2101 complaint_series and remove out of date comment.
2102 (symfile_complaint_hook): Use equivalent enum value
2103 ISOLATED_MESSAGE instead of 0.
2105 2015-08-06 Pedro Alves <palves@redhat.com>
2107 * nat/linux-waitpid.c (my_waitpid): Only print *status if waitpid
2110 2015-08-06 Pierre Langlois <pierre.langlois@arm.com>
2112 * common/agent.c (symbol_list) <required>: Remove.
2114 2015-08-06 Pedro Alves <palves@redhat.com>
2116 * target/waitstatus.h (enum target_stop_reason)
2117 <TARGET_STOPPED_BY_SINGLE_STEP>: New value.
2119 2015-08-05 Pedro Alves <palves@redhat.com>
2120 Joel Brobecker <brobecker@adacore.com>
2122 * breakpoint.c (bpstat_what) <bp_longjmp, bp_longjmp_call_dummy>
2123 <bp_exception, bp_longjmp_resume, bp_exception_resume>: Handle the
2124 case where BS->STOP is not set.
2126 2015-08-05 Ulrich Weigand <uweigand@de.ibm.com>
2128 * nat/gdb_thread_db.h: Add copyright header.
2129 Protect against multiple inclusion.
2131 2015-08-05 Yao Qi <yao.qi@linaro.org>
2133 * aarch64-linux-nat.c (get_thread_id): Remove.
2134 (debug_reg_change_callback): Call ptid_get_lwp instead of
2136 (fetch_gregs_from_thread): Likewise.
2137 (store_gregs_to_thread): Likewise.
2138 (fetch_fpregs_from_thread): Likewise.
2139 (store_fpregs_to_thread): Likewise.
2140 (aarch64_linux_get_debug_reg_capacity): Likewise.
2141 * arm-linux-nat.c (get_thread_id): Remove.
2142 (GET_THREAD_ID): Update macro to use ptid_get_lwp.
2143 * xtensa-linux-nat.c (get_thread_id): Remove.
2144 (GET_THREAD_ID): Update macro to use ptid_get_lwp.
2145 * arm-linux-nat.c (get_thread_id): Remove.
2146 (GET_THREAD_ID): Remove.
2147 (fetch_fpregs): Call ptid_get_lwp instead of GET_THREAD_ID.
2148 (store_fpregs, fetch_regs, store_regs): Likewise.
2149 (fetch_wmmx_regs, store_wmmx_regs): Likewise.
2150 (fetch_vfp_regs, store_vfp_regs): Likewise.
2151 (arm_linux_read_description): Likewise.
2152 (arm_linux_get_hwbp_cap): Likewise.
2153 * xtensa-linux-nat.c (get_thread_id): Remove.
2154 (GET_THREAD_ID): Remove.
2155 (fetch_gregs, store_gregs): Call ptid_get_lwp instead of
2158 2015-08-04 Ciro Santilli <ciro.santilli@gmail.com> (obvious patch)
2160 * python/py-linetable.c: Fix case of Linetable to LineTable
2161 in docstrings and code comments.
2162 * python/py-symtab.c: Same.
2164 2015-08-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2166 * infcmd.c (signal_command): Call do_cleanups for args_chain.
2168 2015-08-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2171 * infcmd.c (attach_command): Move ARGS_CHAIN cleanup after last ARGS
2174 2015-08-04 Pedro Alves <palves@redhat.com>
2176 * nat/gdb_thread_db.h (td_init_ftype, td_ta_new_ftype)
2177 (td_ta_map_lwp2thr_ftype, td_ta_thr_iter_ftype)
2178 (td_ta_event_addr_ftype, td_ta_set_event_ftype)
2179 (td_ta_clear_event_ftype, td_ta_event_getmsg_ftype)
2180 (td_thr_validate_ftype, td_thr_get_info_ftype)
2181 (td_thr_event_enable_ftype, td_thr_tls_get_addr_ftype)
2182 (td_thr_tlsbase_ftype, td_symbol_list_ftype, td_ta_delete_ftype):
2184 * linux-thread-db.c (struct thread_db_info): Use new typedefs.
2185 (try_thread_db_load_1): Define TDB_VERBOSE_DLSYM, TDB_DLSYM , CHK
2186 local macros and use them instead of verbose_dlsym and dlsym
2189 2015-08-03 Sandra Loosemore <sandra@codesourcery.com>
2191 * nios2-tdep.h: Include opcode/nios2.h here.
2192 (NIOS2_CDX_OPCODE_SIZE): New.
2193 (struct gdbarch_tdep): Add OP parameter to syscall_next_pc.
2194 * nios2-tdep.c: Don't include opcode/nios2.h here.
2195 (nios2_fetch_insn): For R2, try reading 2-byte instruction if
2197 (nios2_match_add, nios2_match_sub): Add cases for R2 encodings.
2198 (nios2_match_addi, nios2_match_orhi): Likewise.
2199 (nios2_match_stw, nios2_match_ldw): Likewise.
2200 (nios2_match_rdctl): Likewise.
2201 (nios2_match_stwm, nios2_match_ldwm): New.
2202 (nios2_match_branch): Add cases for R2 encodings.
2203 (nios2_match_jmpi, nios2_match_calli): Likewise.
2204 (nios2_match_jmpr, nios2_match_callr): Likewise.
2205 (nios2_match_break, nios2_match_trap): Likewise.
2206 (nios2_in_epilogue_p): Add R2 support.
2207 (nios2_analyze_prologue): Update comments. Recognize R2 CDX
2209 (nios2_breakpoint_from_pc): Handle R2 instructions.
2210 (nios2_get_next_pc): Likewise. Adjust call to
2211 tdep->syscall_next_pc.
2212 * nios2-linux-tdep.c (nios2_r1_linux_rt_sigreturn_tramp_frame):
2213 Renamed from nios2_linux_rt_sigreturn_tramp_frame. Use
2214 instruction field macros instead of literal hex values.
2215 (nios2_r2_linux_rt_sigreturn_tramp_frame): New.
2216 (nios2_linux_syscall_next_pc): Adjust signature to pass OP.
2217 Use size field from OP instead of assuming all instructions
2219 (nios2_linux_init_abi): Register appropriate unwinder for mach.
2221 2015-08-03 Ulrich Weigand <uweigand@de.ibm.com>
2223 * cp-namespace.c (cp_lookup_symbol_via_imports): Fix uninitialized
2224 variable warning with some compilers.
2226 2015-08-03 Yao Qi <yao.qi@linaro.org>
2228 * arm-linux-nat.c (arm_linux_get_hwbp_type): Capitalize "type"
2229 in comment. Replace "rw" with "type".
2230 (arm_linux_remove_watchpoint): Change type of "rw" to
2231 "enum target_hw_bp_type".
2233 2015-08-02 Pierre-Marie de Rodat <derodat@adacore.com>
2235 * alpha-mdebug-tdep.c (find_proc_desc): Update call to
2237 * ft32-tdep.c (ft32_skip_prologue): Likewise.
2238 * moxie-tdep.c (moxie_skip_prologue): Likewise.
2239 * mt-tdep.c (mt_skip_prologue): Likewise.
2240 * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
2242 2015-08-01 Pierre-Marie de Rodat <derodat@adacore.com>
2244 * ada-exp.y (write_object_renaming): Replace struct
2245 ada_symbol_info with struct block_symbol. Update field
2246 references accordingly.
2247 (block_lookup, select_possible_type_sym): Likewise.
2248 (find_primitive_type): Likewise. Also update call to
2249 ada_lookup_symbol to extract the symbol itself.
2250 (write_var_or_type, write_name_assoc): Likewise.
2251 * ada-lang.h (struct ada_symbol_info): Remove.
2252 (ada_lookup_symbol_list): Replace struct ada_symbol_info with
2253 struct block_symbol.
2254 (ada_lookup_encoded_symbol, user_select_syms): Likewise.
2255 (ada_lookup_symbol): Return struct block_symbol instead of a
2257 * ada-lang.c (defns_collected): Replace struct ada_symbol_info
2258 with struct block_symbol.
2259 (resolve_subexp, ada_resolve_function, sort_choices,
2260 user_select_syms, is_nonfunction, add_defn_to_vec,
2261 num_defns_collected, defns_collected,
2262 symbols_are_identical_enums, remove_extra_symbols,
2263 remove_irrelevant_renamings, add_lookup_symbol_list_worker,
2264 ada_lookup_symbol_list, ada_iterate_over_symbols,
2265 ada_lookup_encoded_symbol, get_var_value): Likewise.
2266 (ada_lookup_symbol): Return a block_symbol instead of a mere
2267 symbol. Replace struct ada_symbol_info with struct
2269 (ada_lookup_symbol_nonlocal): Likewise.
2270 (standard_lookup): Make block passing explicit through
2271 lookup_symbol_in_language.
2272 * ada-tasks.c (get_tcb_types_info): Update the calls to
2273 lookup_symbol_in_language to extract the mere symbol out of the
2275 (ada_tasks_inferior_data_sniffer): Likewise.
2276 * ax-gdb.c (gen_static_field): Likewise for the call to
2278 (gen_maybe_namespace_elt): Deal with struct block_symbol from
2280 (gen_expr): Likewise.
2281 * c-exp.y: Likewise. Remove uses of block_found.
2282 (lex_one_token, classify_inner_name, c_print_token): Likewise.
2283 (classify_name): Likewise. Rename the "sym" local variable to
2285 * c-valprint.c (print_unpacked_pointer): Likewise.
2286 * compile/compile-c-symbols.c (convert_symbol_sym): Promote the
2287 "sym" parameter from struct symbol * to struct block_symbol.
2288 Use it to remove uses of block_found. Deal with struct
2289 block_symbol from lookup functions.
2290 (gcc_convert_symbol): Likewise. Update the call to
2292 * compile/compile-object-load.c (compile_object_load): Deal with
2293 struct block_symbol from lookup functions.
2294 * cp-namespace.c (cp_lookup_nested_symbol_1,
2295 cp_lookup_nested_symbol, cp_lookup_bare_symbol,
2296 cp_search_static_and_baseclasses,
2297 cp_lookup_symbol_in_namespace, cp_lookup_symbol_via_imports,
2298 cp_lookup_symbol_imports_or_template,
2299 cp_lookup_symbol_via_all_imports, cp_lookup_symbol_namespace,
2300 lookup_namespace_scope, cp_lookup_nonlocal,
2301 find_symbol_in_baseclass): Return struct block_symbol instead of
2302 mere symbols and deal with struct block_symbol from lookup
2304 * cp-support.c (inspect_type, replace_typedefs,
2305 cp_lookup_rtti_type): Deal with struct block_symbol from
2307 * cp-support.h (cp_lookup_symbol_nonlocal,
2308 cp_lookup_symbol_from_namespace,
2309 cp_lookup_symbol_imports_or_template, cp_lookup_nested_symbol):
2310 Return struct block_symbol instead of mere symbols.
2311 * d-exp.y (d_type_from_name, d_module_from_name, push_variable,
2313 Deal with struct block_symbol from lookup functions. Remove
2314 uses of block_found.
2315 * eval.c (evaluate_subexp_standard): Update call to
2316 cp_lookup_symbol_namespace.
2317 * f-exp.y: Deal with struct block_symbol from lookup functions.
2318 Remove uses of block_found.
2320 * gdbtypes.c (lookup_typename, lookup_struct, lookup_union,
2321 lookup_enum, lookup_template_type, check_typedef): Deal with
2322 struct block_symbol from lookup functions.
2323 * guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
2324 * guile/scm-symbol.c (gdbscm_lookup_symbol): Likewise.
2325 (gdbscm_lookup_global_symbol): Likewise.
2326 * gnu-v3-abi.c (gnuv3_get_typeid_type): Likewise.
2327 * go-exp.y: Likewise. Remove uses of block_found.
2328 (package_name_p, classify_packaged_name, classify_name):
2330 * infrun.c (insert_exception_resume_breakpoint): Likewise.
2331 * jv-exp.y (push_variable): Likewise.
2332 * jv-lang.c (java_lookup_class, get_java_object_type): Likewise.
2333 * language.c (language_bool_type): Likewise.
2334 * language.h (struct language_defn): Update
2335 la_lookup_symbol_nonlocal to return a struct block_symbol rather
2337 * linespec.c (find_label_symbols): Deal with struct block_symbol
2338 from lookup functions.
2339 * m2-exp.y: Likewise. Remove uses of block_found.
2341 * mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
2342 * objc-lang.c (lookup_struct_typedef, find_imps): Likewise.
2343 * p-exp.y: Likewise. Remove uses of block_found.
2345 * p-valprint.c (pascal_val_print): Likewise.
2346 * parse.c (write_dollar_variable): Likewise. Remove uses of
2348 * parser-defs.h (struct symtoken): Turn the SYM field into a
2349 struct block_symbol.
2350 * printcmd.c (address_info): Deal with struct block_symbol from
2352 * python/py-frame.c (frapy_read_var): Likewise.
2353 * python/py-symbol.c (gdbpy_lookup_symbol,
2354 gdbpy_lookup_global_symbol): Likewise.
2355 * skip.c (skip_function_command): Likewise.
2356 * solib-darwin.c (darwin_lookup_lib_symbol): Return a struct
2357 block_symbol instead of a mere symbol.
2358 * solib-spu.c (spu_lookup_lib_symbol): Likewise.
2359 * solib-svr4.c (elf_lookup_lib_symbol): Likewise.
2360 * solib.c (solib_global_lookup): Likewise.
2361 * solist.h (solib_global_lookup): Likewise.
2362 (struct target_so_ops): Update lookup_lib_global_symbol to
2363 return a struct block_symbol rather than a mere symbol.
2364 * source.c (select_source_symtab): Deal with struct block_symbol
2365 from lookup functions.
2366 * stack.c (print_frame_args, iterate_over_block_arg_vars):
2368 * symfile.c (set_initial_language): Likewise.
2369 * symtab.c (SYMBOL_LOOKUP_FAILED): Turn into a struct
2371 (SYMBOL_LOOKUP_FAILED_P): New predicate as a macro.
2372 (struct symbol_cache_slot): Turn the FOUND field into a struct
2374 (block_found): Remove.
2375 (eq_symbol_entry): Update to deal with struct block_symbol in
2377 (symbol_cache_lookup): Return a struct block_symbol rather than
2379 (symbol_cache_mark_found): Add a BLOCK parameter to fill
2380 appropriately the cache slots. Update callers.
2381 (symbol_cache_dump): Update cache slots handling to the type
2383 (lookup_symbol_in_language, lookup_symbol, lookup_language_this,
2384 lookup_symbol_aux, lookup_local_symbol,
2385 lookup_symbol_in_objfile, lookup_global_symbol_from_objfile,
2386 lookup_symbol_in_objfile_symtabs,
2387 lookup_symbol_in_objfile_from_linkage_name,
2388 lookup_symbol_via_quick_fns, basic_lookup_symbol_nonlocal,
2389 lookup_symbol_in_static_block, lookup_static_symbol,
2390 lookup_global_symbol):
2391 Return a struct block_symbol rather than a mere symbol. Deal
2392 with struct block_symbol from other lookup functions. Remove
2393 uses of block_found.
2394 (lookup_symbol_in_block): Remove uses of block_found.
2395 (struct global_sym_lookup_data): Turn the RESULT field into a
2396 struct block_symbol.
2397 (lookup_symbol_global_iterator_cb): Update references to the
2399 (search_symbols): Deal with struct block_symbol from lookup
2401 * symtab.h (struct block_symbol): New structure.
2402 (block_found): Remove.
2403 (lookup_symbol_in_language, lookup_symbol,
2404 basic_lookup_symbol_nonlocal, lookup_symbol_in_static_block,
2405 lookup_static_symbol, lookup_global_symbol, lookup_language_this,
2406 lookup_global_symbol_from_objfile): Return a struct block_symbol
2407 rather than just a mere symbol. Update comments to remove
2408 mentions of block_found.
2409 * valops.c (find_function_in_inferior,
2410 value_struct_elt_for_reference, value_maybe_namespace_elt,
2411 value_of_this): Deal with struct block_symbol from lookup
2413 * value.c (value_static_field, value_fn_field): Likewise.
2415 2015-07-31 Simon Marchi <simon.marchi@ericsson.com>
2417 * remote-m32r-sdi.c (m32r_remove_watchpoint): Use enum type
2420 2015-07-31 Simon Marchi <simon.marchi@ericsson.com>
2421 Pedro Alves <palves@redhat.com>
2423 * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
2424 type or value instead of integer.
2425 (aarch64_linux_insert_watchpoint): Likewise.
2426 (aarch64_linux_remove_watchpoint): Likewise.
2427 * ada-lang.c (ada_op_print_tab): Likewise.
2428 * amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
2429 (amd64_linux_syscall_record_common): Likewise.
2430 * arch-utils.c (target_byte_order_user): Likewise.
2431 (default_byte_order): Likewise.
2432 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
2433 (arm_linux_get_hwbp_type): Likewise.
2434 (arm_linux_hw_watchpoint_initialize): Likewise.
2435 (arm_linux_insert_watchpoint): Likewise.
2436 * arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
2437 (arm_linux_syscall_record): Likewise.
2438 * breakpoint.c (update_watchpoint): Likewise.
2439 (breakpoint_here_p): Likewise.
2440 (bpstat_print): Likewise.
2441 (enable_breakpoint_disp): Likewise.
2442 * c-lang.c (c_op_print_tab): Likewise.
2443 * cli/cli-decode.c (add_info_alias): Likewise.
2444 * d-lang.c (d_op_print_tab): Likewise.
2445 * eval.c (evaluate_subexp_standard): Likewise.
2446 * f-exp.y (dot_ops): Likewise.
2447 (f77_keywords): Likewise.
2448 * f-lang.c (f_op_print_tab): Likewise.
2449 * go-lang.c (go_op_print_tab): Likewise.
2450 * guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
2451 * guile/scm-cmd.c (gdbscm_make_command): Likewise.
2452 * guile/scm-param.c (gdbscm_make_parameter): Likewise.
2453 * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
2454 * guile/scm-string.c (struct scm_to_stringn_data): Likewise.
2455 (struct scm_from_stringn_data): Likewise.
2456 * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
2457 * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
2458 (ia64_linux_remove_watchpoint): Likewise.
2459 (ia64_linux_can_use_hw_breakpoint): Likewise.
2460 * infrun.c (print_stop_event): Likewise.
2461 * jv-lang.c (java_op_print_tab): Likewise.
2462 * linux-nat.c (linux_proc_xfer_partial): Likewise.
2463 * linux-nat.h (struct lwp_info): Likewise.
2464 * linux-thread-db.c (enable_thread_event): Likewise.
2465 * m2-lang.c (m2_op_print_tab): Likewise.
2466 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
2467 (mi_cmd_stack_list_variables): Likewise.
2468 * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
2469 * mi/mi-out.c (mi_table_begin): Likewise.
2470 (mi_table_header): Likewise.
2471 * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
2472 (mips_linux_insert_watchpoint): Likewise.
2473 (mips_linux_remove_watchpoint): Likewise.
2474 * nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
2475 * nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
2476 (mips_linux_watch_type_to_irw): Likewise.
2477 * nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
2478 (procfs_insert_hw_watchpoint): Likewise.
2479 (procfs_remove_hw_watchpoint): Likewise.
2480 (procfs_hw_watchpoint): Likewise.
2481 (procfs_can_use_hw_breakpoint): Likewise.
2482 (procfs_remove_hw_watchpoint): Likewise.
2483 (procfs_insert_hw_watchpoint): Likewise.
2484 * p-lang.c (pascal_op_print_tab): Likewise.
2485 * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
2486 * ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
2487 * ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
2488 * procfs.c (procfs_can_use_hw_breakpoint): Likewise.
2489 (procfs_insert_watchpoint): Likewise.
2490 (procfs_remove_watchpoint): Likewise.
2491 * psymtab.c (recursively_search_psymtabs): Likewise.
2492 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
2493 (m32r_insert_watchpoint): Likewise.
2494 * remote-mips.c (mips_can_use_watchpoint): Likewise.
2495 (mips_insert_watchpoint): Likewise.
2496 (mips_remove_watchpoint): Likewise.
2497 * remote.c (watchpoint_to_Z_packet): Likewise.
2498 (remote_insert_watchpoint): Likewise.
2499 (remote_remove_watchpoint): Likewise.
2500 (remote_check_watch_resources): Likewise.
2501 * s390-linux-nat.c (s390_insert_watchpoint): Likewise.
2502 (s390_remove_watchpoint): Likewise.
2503 (s390_can_use_hw_breakpoint): Likewise.
2504 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
2505 * spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
2506 * target.h (struct target_ops): Likewise.
2507 * tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
2508 * ui-out.c (struct ui_out_hdr): Likewise.
2509 (append_header_to_list): Likewise.
2510 (get_next_header): Likewise.
2511 (verify_field): Likewise.
2512 (ui_out_begin): Likewise.
2513 (ui_out_field_int): Likewise.
2514 (ui_out_field_fmt_int): Likewise.
2515 (ui_out_field_skip): Likewise.
2516 (ui_out_field_string): Likewise.
2517 (ui_out_field_fmt): Likewise.
2518 * varobj.c (new_variable): Likewise.
2519 * x86-nat.c (x86_insert_watchpoint): Likewise.
2520 (x86_remove_watchpoint): Likewise.
2521 (x86_can_use_hw_breakpoint): Likewise.
2522 * xtensa-tdep.h (struct gdbarch_tdep): Likewise.
2523 * inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
2524 previously anonymous enumeration type..
2525 * linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
2527 * target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
2528 (target_debug_print_enum_bptype): New.
2529 * target-delegates.c: Regenerate.
2531 2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
2533 * nios2-tdep.c (nios2_analyze_prologue): Do what the comment
2534 already says and disallow non-stack memory writes in the prologue.
2536 2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
2538 * nios2-tdep.c (nios2_analyze_prologue): Update comments to
2539 reflect how current GCC emits stack overflow checks. Match
2540 both trap and break instructions for backward compatbility.
2541 Disallow other trap and break instructions in the prologue.
2543 2015-07-30 Pedro Alves <palves@redhat.com>
2546 * linux-nat.c (wait_lwp): Report to the core when thread group
2549 2015-07-30 Pedro Alves <palves@redhat.com>
2550 Simon Marchi <simon.marchi@ericsson.com>
2553 * linux-nat.c (linux_handle_extended_wait): On CLONE event, always
2554 mark the new thread as resumed. Remove STOPPING parameter.
2555 (wait_lwp): Adjust call to linux_handle_extended_wait.
2556 (linux_nat_filter_event): Adjust call to
2557 linux_handle_extended_wait.
2558 (resume_stopped_resumed_lwps): Add debug output.
2560 2015-07-30 Pierre Langlois <pierre.langlois@arm.com>
2562 * arch-utils.c (default_fast_tracepoint_valid_at): Remove unused
2564 * arch-utils.h (default_fast_tracepoint_valid_at): Likewise.
2565 * breakpoint.c (check_fast_tracepoint_sals): Adjust call to
2566 gdbarch_fast_tracepoint_valid_at.
2567 * gdbarch.sh (fast_tracepoint_valid_at): Remove isize argument.
2568 * gdbarch.h: Regenerate.
2569 * gdbarch.c: Regenerate.
2570 * i386-tdep.c (i386_fast_tracepoint_valid_at): Remove isize
2571 argument. Do not set it.
2572 * remote.c (remote_download_tracepoint): Adjust call to
2573 gdbarch_fast_tracepoint_valid_at. Call gdb_insn_length to get
2574 the instruction length.
2576 2015-07-30 Yao Qi <yao.qi@linaro.org>
2578 * arm-tdep.h (enum gdb_regnum): Move it to ...
2579 * arch/arm.h: ... here. New file.
2580 * Makefile.in (HFILES_NO_SRCDIR): Add arch/arm.h.
2582 2015-07-30 Pierre Langlois <pierre.langlois@arm.com>
2584 * aarch64-tdep.c (decode_b): Rename link argument to is_bl.
2585 Change its type to int *.
2586 (decode_br): Rename link argument to is_blr. Change its type to
2588 (decode_cb): Rename op argument to is_cbnz. Change its type to
2590 (decode_tb): Rename op argument to is_tbnz. Change its type to
2591 int *. Set is_tbnz to either 1 or 0.
2592 (aarch64_analyze_prologue): Change type of is_link to int. Add
2593 new variables is_cbnz and is_tbnz. Adjust call to
2594 aarch64_decode_cb and aarch64_decode_tb.
2596 2015-07-29 Simon Marchi <simon.marchi@ericsson.com>
2598 * mips-linux-nat.c (write_watchpoint_regs): Add NULL as ptrace's 4th
2600 (mips_linux_new_thread): Likewise.
2601 * nat/mips-linux-watch.c (mips_linux_read_watch_registers): Likewise.
2603 2015-07-29 Patrick Palka <patrick@parcs.ath.cx>
2605 * top.c: Include "tui/tui.h".
2606 (undo_terminal_modifications_before_exit): New static function.
2607 (quit_force): Use it.
2609 2015-07-29 Patrick Palka <patrick@parcs.ath.cx>
2611 * target.c (terminal_state): Initialize to terminal_is_ours.
2613 2015-07-29 Yao Qi <yao.qi@linaro.org>
2616 * dcache.c (dcache_read_memory_partial): Call
2617 raw_memory_xfer_partial.
2618 * target.c (raw_memory_xfer_partial): Make it non-static.
2619 * target.h (raw_memory_xfer_partial): Declare.
2621 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2623 * c-valprint.c (c_val_print_array): Consider addressable memory
2625 (c_val_print_ptr): Likewise.
2626 (c_val_print_int): Likewise.
2627 * findvar.c (read_frame_register_value): Likewise.
2628 * valarith.c (find_size_for_pointer_math): Likewise.
2629 (value_ptrdiff): Likewise.
2630 (value_subscripted_rvalue): Likewise.
2631 * valops.c (read_value_memory): Likewise (and rename variables).
2632 (value_assign): Likewise.
2633 (value_repeat): Likewise.
2634 (value_array): Likewise.
2635 (value_slice): Likewise.
2636 * valprint.c (generic_val_print_ptr): Likewise.
2637 (generic_val_print_enum): Likewise.
2638 (generic_val_print_bool): Likewise.
2639 (generic_val_print_int): Likewise.
2640 (generic_val_print_char): Likewise.
2641 (generic_val_print_float): Likewise.
2642 (generic_val_print_decfloat): Likewise.
2643 (generic_val_print_complex): Likewise.
2644 (val_print_scalar_formatted): Likewise.
2645 (val_print_array_elements): Likewise.
2646 * value.c (set_value_parent): Likewise.
2647 (value_contents_copy_raw): Likewise.
2648 (set_internalvar_component): Likewise.
2649 (value_primitive_field): Likewise.
2650 (value_fetch_lazy): Likewise.
2651 * value.h (read_value_memory): Update comment.
2653 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2655 * value.c (get_value_arch): New function.
2656 * value.h (get_value_arch): New declaration.
2658 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2660 * value.c (struct value): Update comments.
2662 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2664 * gdbtypes.c (type_length_units): New function.
2665 * gdbtypes.h (type_length_units): New declaration.
2666 (struct type) <length>: Update comment.
2668 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2670 * valprint.c (generic_val_print): Factor out complex
2671 printing code to ...
2672 (generic_val_print_complex): ... this new function.
2674 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2676 * valprint.c (generic_val_print): Factor out decfloat
2677 printing code to ...
2678 (generic_val_print_decfloat): ... this new function.
2680 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2682 * valprint.c (generic_val_print): Factor out float
2683 printing code to ...
2684 (generic_val_print_float): ... this new function.
2686 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2688 * valprint.c (generic_val_print): Factor out char
2689 printing code to ...
2690 (generic_val_print_char): ... this new function.
2692 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2694 * valprint.c (generic_val_print): Factor out integer
2695 printing code to ...
2696 (generic_val_print_int): ... this new function.
2698 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2700 * valprint.c (generic_val_print): Factor out bool
2701 printing code to ...
2702 (generic_val_print_bool): ... this new function.
2704 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2706 * valprint.c (generic_val_print): Factor out function/method
2707 printing code to ...
2708 (generic_val_print_func): ... this new function.
2710 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2712 * valprint.c (generic_val_print): Factor out flags
2713 printing code to ...
2714 (generic_val_print_flags): ... this new function.
2716 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2718 * valprint.c (generic_val_print): Factor out enum
2719 printing code to ...
2720 (generic_val_print_enum): ... this new function.
2722 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2724 * valprint.c (generic_val_print): Factor out reference
2725 printing code to ...
2726 (generic_val_print_ref): ... this new function.
2728 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2730 * valprint.c (generic_val_print): Factor out memberptr
2731 printing code to ...
2732 (generic_val_print_memberptr): ... this new function.
2734 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2736 * valprint.c (generic_val_print): Factor out pointer
2737 printing code to ...
2738 (generic_val_print_ptr): ... this new function.
2740 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2742 * valprint.c (generic_val_print): Factor out array
2743 printing code to ...
2744 (generic_val_print_array): ... this new function.
2746 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2748 * valprint.c (generic_val_print): Factor out
2749 print_unpacked_pointer code to ...
2750 (print_unpacked_pointer): ... this new function.
2752 2015-07-27 Patrick Palka <patrick@parcs.ath.cx>
2754 * event-top.c (handle_sigterm): Don't inspect
2755 target_can_async_p. Always set the quit flag and always mark
2756 the async signal handler.
2758 2015-07-27 Yao Qi <yao.qi@linaro.org>
2760 * Makefile.in (REMOTE_EXAMPLES): Remove it.
2762 2015-07-25 Kevin Buettner <kevinb@redhat.com>
2764 * remote.c (read_ptid): Return null_ptid when no thread id
2766 (remote_current_thread): Add log warning for malformed
2768 (remote_start_remote): Add log warning when current thread
2771 2015-07-24 Pedro Alves <palves@redhat.com>
2773 * s390-linux-nat.c (fetch_regs, store_regs, fetch_fpregs)
2774 (s390_stopped_by_watchpoint, s390_prepare_to_resume): Pass 0 as
2775 forth argument to ptrace PTRACE_PEEKUSR_AREA/PTRACE_POKEUSR_AREA.
2777 2015-07-24 Pedro Alves <palves@redhat.com>
2780 * linux-nat.c (linux_nat_filter_event): Don't assert that the lwp
2781 is resumed, and extend the debug log.
2783 2015-07-24 Pedro Alves <palves@redhat.com>
2785 * fork-child.c (fork_inferior): Print argv[0] instead of exec_file.
2787 2015-07-24 Pedro Alves <palves@redhat.com>
2789 * aarch64-linux-nat.c: Include nat/gdb_ptrace.h instead of
2791 * alpha-linux-nat.c: Likewise.
2792 * amd64-linux-nat.c: Likewise.
2793 * arm-linux-nat.c: Likewise.
2794 * hppa-linux-nat.c: Likewise.
2795 * i386-linux-nat.c: Likewise.
2796 * ia64-linux-nat.c: Likewise.
2797 * linux-fork.c: Likewise.
2798 * linux-nat.c: Likewise.
2799 * m32r-linux-nat.c: Likewise.
2800 * m68klinux-nat.c: Likewise.
2801 * mips-linux-nat.c: Likewise.
2802 * nat/linux-btrace.c: Likewise.
2803 * nat/linux-ptrace.c: Likewise.
2804 * nat/linux-ptrace.h
2805 * nat/mips-linux-watch.c: Likewise.
2806 * nat/x86-linux-dregs.c: Likewise.
2807 * ppc-linux-nat.c: Likewise.
2808 * s390-linux-nat.c: Likewise.
2809 * spu-linux-nat.c: Likewise.
2810 * tilegx-linux-nat.c: Likewise.
2811 * x86-linux-nat.c: Likewise.
2812 * xtensa-linux-nat.c: Likewise.
2814 2015-07-24 Pedro Alves <palves@redhat.com>
2816 * ptrace.m4 (ptrace tests): Test in C++ mode. Try with 'enum
2817 __ptrace_request as first parameter type instead of int.
2818 (PTRACE_TYPE_ARG1): Define.
2819 * nat/gdb_ptrace.h [!PTRACE_TYPE_ARG5] (ptrace): Define as wrapper
2820 that casts first argument to PTRACE_TYPE_ARG1.
2821 * config.in: Regenerate.
2822 * configure: Regenerate.
2824 2015-07-24 Pedro Alves <palves@redhat.com>
2826 * gdb_ptrace.h: Move ...
2827 * nat/gdb_ptrace.h: ... here.
2828 * inf-ptrace.c: Adjust.
2830 2015-07-24 Pedro Alves <palves@redhat.com>
2832 * acinclude.m4: Include ptrace.m4.
2833 * configure.ac: Call GDB_AC_PTRACE and move ptrace checks ...
2834 * ptrace.m4: ... to this new file.
2836 2015-07-23 Doug Evans <dje@google.com>
2838 * dwarf2read.c (dwarf2_per_cu_data): Add comment.
2839 (load_cu): Handle dummy CUs.
2840 (dw2_do_instantiate_symtab, process_queuef): Ditto.
2841 (dwarf2_fetch_die_loc_sect_off, dwarf2_fetch_constant_bytes): Ditto.
2843 2015-07-23 Ciro Santilli <ciro.santilli@gmail.com> (tiny patch)
2845 * py-linetable.c (ltpy_get_all_source_lines): Adjust function
2846 documentation to say that it returns a list rather than
2848 (linetable_object_methods): Update the docstring of the
2849 "source_line" entry.
2851 2015-07-23 Pierre-Marie de Rodat <derodat@adacore.com>
2853 * gdbtypes.c (resolve_dynamic_array): Pass the peeled element
2854 type to the recursive call instead of the original (maybe
2855 TYPE_CODE_TYPEDEF) type.
2857 2015-07-23 Yao Qi <yao.qi@linaro.org>
2859 * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): If
2860 TYPE is watchpoint, return zero if aarch64_num_wp_regs is zero.
2861 If TYPE is breakpoint, return zero if arch64_num_bp_regs is zero.
2863 2015-07-21 Yao Qi <yao.qi@linaro.org>
2865 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
2866 Move it to nat/aarch64-linux-hw-point.c.
2867 (aarch64_linux_child_post_startup_inferior): Update.
2868 * nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity):
2870 * nat/aarch64-linux-hw-point.h (aarch64_linux_get_debug_reg_capacity):
2873 2015-07-21 Markus Metzger <markus.t.metzger@intel.com>
2875 * common/btrace-common.c (btrace_data_append): Change case label.
2877 2015-07-20 Yao Qi <yao.qi@linaro.org>
2879 * nat/aarch64-linux-hw-point.c (aarch64_handle_unaligned_watchpoint):
2881 * nat/aarch64-linux-hw-point.h: Use ULONGEST rather than
2882 "unsigned long long".
2884 2015-07-18 Kevin Buettner <kevinb@redhat.com>
2886 * dwarf2read.c (dwarf2_locate_sections): Allow has_section_at_zero
2887 to be set for SEC_ALLOC sections too.
2889 2015-07-17 Yao Qi <yao.qi@linaro.org>
2891 * Makefile.in (HFILES_NO_SRCDIR): Add
2892 nat/aarch64-linux-hw-point.h.
2893 (aarch64-linux-hw-point.o): New rule.
2894 * nat/aarch64-linux-hw-point.h: New file.
2895 * nat/aarch64-linux-hw-point.c: New file.
2896 * aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h.
2897 (AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
2898 (AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
2899 (AARCH64_HWP_ALIGNMENT): Likewise.
2900 (AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
2901 (AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
2902 (AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
2903 (DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
2904 (DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
2905 (aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
2906 (struct aarch64_debug_reg_state): Likewise.
2907 (struct arch_lwp_info): Likewise.
2908 (aarch64_linux_set_debug_regs): Likewise.
2909 (aarch64_notify_debug_reg_change): Remove static.
2910 (aarch64_align_watchpoint): Likewise.
2911 (DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
2912 (aarch64_watchpoint_length): Likewise.
2913 (aarch64_point_encode_ctrl_reg): Likewise
2914 (aarch64_point_is_aligned): Likewise.
2915 (aarch64_dr_state_insert_one_point): Likewise.
2916 (aarch64_dr_state_remove_one_point): Likewise.
2917 (aarch64_handle_breakpoint): Likewise.
2918 (aarch64_handle_aligned_watchpoint): Likewise.
2919 (aarch64_handle_unaligned_watchpoint): Likewise.
2920 (aarch64_handle_watchpoint): Likewise.
2921 * config/aarch64/linux.mh (NAT_FILE): Add
2922 aarch64-linux-hw-point.o.
2924 2015-07-17 Yao Qi <yao.qi@linaro.org>
2926 * aarch64-linux-nat.c (aarch64_handle_breakpoint): Add argument
2927 state and don't call aarch64_get_debug_reg_state. All callers
2929 (aarch64_linux_insert_hw_breakpoint): Call
2930 aarch64_get_debug_reg_state earlier.
2931 (aarch64_linux_remove_hw_breakpoint): Likewise.
2932 (aarch64_handle_aligned_watchpoint): Add argument state and
2933 don't call aarch64_get_debug_reg_state. All callers update.
2934 (aarch64_handle_unaligned_watchpoint): Likewise.
2935 (aarch64_handle_watchpoint): Add argument state.
2936 (aarch64_linux_insert_watchpoint): Call aarch64_get_debug_reg_state
2938 (aarch64_linux_remove_watchpoint): Likewise.
2940 2015-07-17 Yao Qi <yao.qi@linaro.org>
2942 * aarch64-linux-nat.c (aarch64_show_debug_reg_state): Use
2944 (aarch64_handle_unaligned_watchpoint): Likewise.
2946 2015-07-17 Yao Qi <yao.qi@linaro.org>
2948 * aarch64-linux-nat.c (aarch64_dr_state_insert_one_point): Change
2949 argument type's type to 'enum target_hw_bp_type'.
2950 (aarch64_dr_state_remove_one_point): Likewise.
2951 (aarch64_handle_breakpoint): Likewise.
2952 (aarch64_linux_insert_hw_breakpoint): Likewise.
2953 (aarch64_linux_remove_hw_breakpoint): Likewise.
2954 (aarch64_handle_aligned_watchpoint): Likewise.
2956 2015-07-17 Yao Qi <yao.qi@linaro.org>
2958 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Call
2959 ptid_get_pid instead of get_thread_id.
2961 2015-07-17 Yao Qi <yao.qi@linaro.org>
2963 * remote.c (get_current_thread): Initialise ptid to null_ptid.
2964 (add_current_inferior_and_thread): Don't initialise ptid.
2966 2015-07-16 Pierre Langlois <pierre.langlois@arm.com>
2968 * aarch64-tdep.c (aarch64_pseudo_read_value): Mark S register as
2969 unavailable if invalid.
2971 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2973 Revert the previous 6 commits:
2974 Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
2975 Move gdb_regex* to common/
2976 Prepare linux_find_memory_regions_full & co. for move
2977 Move linux_find_memory_regions_full & co.
2978 gdbserver build-id attribute generator
2979 Validate symbol file using build-id
2981 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
2982 Jan Kratochvil <jan.kratochvil@redhat.com>
2984 Validate symbol file using build-id.
2985 * NEWS (Changes since GDB 7.10): Add 'set validate-build-id'
2986 and 'show validate-build-id'. Add build-id attribute.
2987 * solib-darwin.c (_initialize_darwin_solib): Assign validate value.
2988 * solib-dsbt.c (_initialize_dsbt_solib): Ditto.
2989 * solib-frv.c (_initialize_frv_solib): Ditto.
2990 * solib-spu.c (set_spu_solib_ops): Ditto.
2991 * solib-svr4.c: Include rsp-low.h.
2992 (NOTE_GNU_BUILD_ID_NAME): New define.
2993 (svr4_validate): New function.
2994 (svr4_copy_library_list): Duplicate field build_id.
2995 (library_list_start_library): Parse 'build-id' attribute.
2996 (svr4_library_attributes): Add 'build-id' attribute.
2997 (_initialize_svr4_solib): Assign validate value.
2998 * solib-target.c (solib.h): Include.
2999 (_initialize_solib_target): Assign validate value.
3000 * solib.c (validate_build_id, show_validate_build_id): New.
3001 (solib_map_sections): Use ops->validate.
3002 (clear_so): Free build_id.
3003 (default_solib_validate): New function.
3004 (_initialize_solib): Add "validate-build-id".
3005 * solib.h (default_solib_validate): New declaration.
3006 * solist.h (struct so_list): New fields 'build_idsz' and 'build_id'.
3007 (target_so_ops): New field 'validate'.
3009 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3010 Jan Kratochvil <jan.kratochvil@redhat.com>
3012 gdbserver build-id attribute generator.
3013 * features/library-list-svr4.dtd (library-list-svr4): New
3014 'build-id' attribute.
3016 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3017 Jan Kratochvil <jan.kratochvil@redhat.com>
3019 Move linux_find_memory_regions_full & co.
3020 * linux-tdep.c (nat/linux-maps.h): Include.
3021 (gdb_regex.h): Remove the include.
3022 (enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
3023 (mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
3024 (linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
3025 (linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
3026 * nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
3027 and target/target.h.
3028 (struct smaps_vmflags, read_mapping, decode_vmflags)
3029 (mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
3030 (linux_find_memory_regions_full): Move from linux-tdep.c.
3031 * nat/linux-maps.h (read_mapping): New declaration.
3032 (linux_find_memory_region_ftype, enum filterflags): Moved from
3034 (linux_find_memory_regions_full): New declaration.
3035 * target.c (target/target-utils.h): Include.
3036 (read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
3037 (read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
3038 definitions to target/target-utils.c.
3039 * target.h (target_fileio_read_stralloc): Move it to target/target.h.
3040 * target/target-utils.c (read_alloc, read_stralloc): Move definitions
3042 * target/target-utils.h (read_alloc_pread_ftype): New typedef.
3043 (read_alloc): New declaration.
3044 (read_stralloc_func_ftype): New typedef.
3045 (read_stralloc): New declaration.
3046 * target/target.h (target_fileio_read_stralloc): Move it from target.h.
3048 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3049 Jan Kratochvil <jan.kratochvil@redhat.com>
3051 Prepare linux_find_memory_regions_full & co. for move.
3052 * linux-tdep.c (linux_find_memory_region_ftype): Comment.
3053 (linux_find_memory_regions_full): Change signature and prepare
3054 for moving to linux-maps.
3055 (linux_find_memory_regions_data): Rename field 'obfd' to 'data'.
3056 (linux_find_memory_regions_thunk): New.
3057 (linux_find_memory_regions_thunk): Use 'data' field instead of 'obfd'.
3058 (linux_find_memory_regions_gdb): New.
3059 (linux_find_memory_regions): Rename argument 'obfd' to 'func_data'.
3060 (linux_make_mappings_corefile_notes): Use
3061 linux_find_memory_regions_gdb.
3062 * target.c (read_alloc_pread_ftype): New typedef.
3063 (target_fileio_read_alloc_1_pread): New function.
3064 (read_alloc): Refactor from target_fileio_read_alloc_1.
3065 (read_stralloc_func_ftype): New typedef.
3066 (target_fileio_read_alloc_1): New implementation. Use read_alloc.
3067 (read_stralloc): Refactored from target_fileio_read_stralloc.
3068 (target_fileio_read_stralloc): New implementation, use read_stralloc.
3070 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3072 * Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
3074 (COMMON_OBS): Add gdb_regex.o.
3076 * common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
3077 --without-included-regex and USE_INCLUDED_REGEX.
3078 * common/gdb_regex.c: New file from utils.c functions.
3079 * common/gdb_regex.h: Move it here from gdb_regex.h, update include
3080 file wrapping define name.
3081 * configure: Rebuilt.
3082 * configure.ac (gdb_use_included_regex, --without-included-regex)
3083 (USE_INCLUDED_REGEX): Move them to common/common.m4.
3084 * gdb_regex.h: Move it to common/gdb_regex.h.
3085 * utils.c: Remove include gdb_regex.h.
3086 (do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
3087 (compile_rx_or_error): Move them to common/gdb_regex.c.
3089 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3090 Jan Kratochvil <jan.kratochvil@redhat.com>
3092 Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
3093 * Makefile.in (HFILES_NO_SRCDIR); Add nat/linux-maps.h,
3094 common/target-utils.h.
3095 (COMMON_OBS): Add target-utils.o.
3096 (linux-maps.o, target-utils.o): New.
3097 * target/target-utils.c: New file.
3098 * target/target-utils.h: New file.
3099 * config/i386/linux.mh (NATDEPFILES): Add linux-maps.o.
3100 * config/i386/linux64.mh (NATDEPFILES): Ditto.
3101 * nat/linux-maps.c: New file.
3102 * nat/linux-maps.h: New file.
3104 2015-07-15 Markus Metzger <markus.t.metzger@intel.com>
3105 Pedro Alves <palves@redhat.com>
3107 * nat/linux-btrace.c (perf_event_read): Change the type of DATA_HEAD.
3108 (perf_event_read_all): Change the type of SIZE and DATA_HEAD.
3109 (perf_event_read_bts): Change the type of SIZE and READ.
3110 (linux_enable_bts): Change the type of SIZE, PAGES, DATA_SIZE,
3111 and DATA_OFFSET. Move DATA_SIZE declaration. Restrict the buffer size
3112 to UINT_MAX. Check for overflows when using DATA_HEAD from the perf
3114 (linux_enable_pt): Change the type of PAGES and SIZE. Restrict the
3115 buffer size to UINT_MAX.
3116 (linux_read_bts): Change the type of BUFFER_SIZE, SIZE, DATA_HEAD, and
3118 * nat/linux-btrace.h (struct perf_event_buffer)<size, data_head>
3119 <last_head>: Change type.
3120 * common/btrace-common.h (struct btrace_dat_pt) <size>: Change type.
3121 * common/btrace-common.c (btrace_data_append): Change the type of
3123 * btrace.c (parse_xml_raw): Change the type of SIZE. Change oddness
3126 2015-07-14 Simon Marchi <simon.marchi@ericsson.com>
3128 * gdbtypes.h (CHECK_TYPEDEF): Remove.
3129 * aarch64-tdep.c (aarch64_return_in_memory): Replace CHECK_TYPEDEF
3131 * ada-lang.c (decode_constrained_packed_array_type): Likewise.
3132 (ada_array_length): Likewise.
3133 (find_parallel_type_by_descriptive_type): Likewise.
3134 (ada_check_typedef): Likewise.
3135 * arm-tdep.c (arm_return_in_memory): Likewise.
3136 * ax-gdb.c (gen_trace_static_fields): Likewise.
3137 (gen_struct_ref_recursive): Likewise.
3138 * c-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
3139 (variable: block COLONCOLON name): Likewise.
3140 (qualified_name: TYPENAME COLONCOLON name): Likewise.
3141 * c-lang.c (classify_type): Likewise.
3142 * c-typeprint.c (c_print_type): Likewise.
3143 (c_print_typedef): Likewise.
3144 (c_type_print_base): Likewise.
3145 * c-valprint.c (c_val_print): Likewise.
3146 * compile/compile-c-types.c (convert_type): Likewise.
3147 * compile/compile-object-load.c (get_out_value_type): Likewise.
3148 * completer.c (add_struct_fields): Likewise.
3149 (expression_completer): Likewise.
3150 * cp-namespace.c (cp_find_type_baseclass_by_name): Likewise.
3151 (cp_lookup_nested_symbol_1): Likewise.
3152 (cp_lookup_nested_symbol): Likewise.
3153 * cp-valprint.c (cp_print_value_fields): Likewise.
3154 (cp_print_static_field): Likewise.
3155 * d-valprint.c (d_val_print): Likewise.
3156 * eval.c (evaluate_subexp_standard): Likewise.
3157 (evaluate_subexp_for_sizeof): Likewise.
3158 * f-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
3159 * f-typeprint.c (f_type_print_base): Likewise.
3160 * f-valprint.c (f_val_print): Likewise.
3161 * gdbtypes.c (get_discrete_bounds): Likewise.
3162 (create_array_type_with_stride): Likewise.
3163 (type_name_no_tag_or_error): Likewise.
3164 (lookup_struct_elt_type): Likewise.
3165 (get_unsigned_type_max): Likewise.
3166 (internal_type_vptr_fieldno): Likewise.
3167 (set_type_vptr_fieldno): Likewise.
3168 (internal_type_vptr_basetype): Likewise.
3169 (set_type_vptr_basetype): Likewise.
3170 (get_vptr_fieldno): Likewise.
3171 (is_integral_type): Likewise.
3172 (is_scalar_type): Likewise.
3173 (is_scalar_type_recursive): Likewise.
3174 (distance_to_ancestor): Likewise.
3175 (is_unique_ancestor_worker): Likewise.
3176 (check_types_equal): Likewise.
3177 * gnu-v2-abi.c (gnuv2_value_rtti_type): Likewise.
3179 2015-07-14 Iain Buclaw <ibuclaw@gdcproject.org>
3181 * dwarf2read.c (find_slot_in_mapped_hash): Extend language support to
3182 also test for language_d.
3183 (dwarf2_compute_name): Likewise.
3184 (read_func_scope): Likewise.
3185 (read_structure_type): Likewise.
3186 (new_symbol_full): Likewise.
3187 (determine_prefix): Likewise.
3188 (read_import_statement): Use dot as the separator for language_d.
3189 (typename_concat): Likewise, but don't prefix the D main function.
3191 2015-07-14 Peter Bergner <bergner@vnet.ibm.com>
3193 * nat/linux-namespaces.c (setns): Rename from this ...
3194 (do_setns): ... to this. Support calling setns if it exists.
3195 (mnsh_handle_setns): Call do_setns.
3197 2015-07-13 Yao Qi <yao.qi@linaro.org>
3199 * exec.c (exec_file_attach): Add period at the end of error
3202 2015-07-13 Andrew Burgess <andrew.burgess@embecosm.com>
3204 * tui/tui-win.c (window_name_completer): New function.
3205 (focus_completer): Call window_name_completer. All old content
3206 moved into window_name_completer.
3207 (winheight_completer): New function.
3208 (_initialize_tui_win): Rename variable. Add completer to
3209 winheight command. Update doc string on winheight.
3211 2015-07-12 Sandra Loosemore <sandra@codesourcery.com>
3213 * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Register
3214 all nios2 mach variants.
3216 2015-07-10 Kevin Buettner <kevinb@redhat.com>
3218 * rx-tdep.c (rx_get_opcode_byte): Use target_read_code instead
3219 of target_read_memory.
3221 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
3223 * tui/tui-win.c (tui_set_win_height): Use a cleanup to free the
3225 (parse_scrolling_args): Likewise.
3227 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
3229 * tui/tui-win.c (focus_completer): Don't duplicate the tui window
3230 names in this function.
3232 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
3234 * tui/tui-data.h (SRC_NAME): Convert to lower case.
3235 (CMD_NAME): Likewise.
3236 (DATA_NAME): Likewise.
3237 (DISASSEM_NAME): Likewise.
3238 * tui/tui-win.c (tui_set_focus): Window names are now lower case.
3239 (tui_set_win_height): Likewise.
3240 (parse_scrolling_args): Likewise.
3242 2015-07-10 Markus Metzger <markus.t.metzger@intel.com>
3244 * record-btrace.c (record_btrace_goto_begin)
3245 (record_btrace_goto_end, record_btrace_goto): Move call to
3246 print_stack_frame ...
3247 (record_btrace_set_replay): ... here. Set stop_pc.
3248 * record-full.c (record_full_goto_entry): Set stop_pc.
3250 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3252 * NEWS: Mention support for tracepoints on aarch64-linux.
3254 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3256 * linux-aarch64-low.c (aarch64_supports_tracepoints): New
3258 (the_low_target): Install it.
3260 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3262 * gdb.trace/backtrace.exp: Set registers for aarch64 target.
3263 * gdb.trace/collection.exp: Likewise.
3264 * gdb.trace/mi-trace-frame-collected.exp: Likewise.
3265 * gdb.trace/mi-trace-unavailable.exp: Likewise.
3266 * gdb.trace/report.exp: Likewise.
3267 * gdb.trace/trace-break.exp: Likewise.
3268 * gdb.trace/unavailable.exp: Likewise.
3269 * gdb.trace/while-dyn.exp: Likewise.
3271 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3273 * aarch64-tdep.c: Add ax.h and ax-gdb.h includes.
3274 (aarch64_gen_return_address): New function.
3275 (aarch64_gdbarch_init): Hook it.
3277 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3279 * aarch64-tdep.c (aarch64_make_stub_cache): Set available_p and
3280 swallow NOT_AVAILABLE_ERROR.
3281 (aarch64_stub_this_id): Call frame_id_build_unavailable_stack if
3282 available_p is not set.
3283 (aarch64_stub_frame_unwind_stop_reason): New function.
3284 (aarch64_stub_unwind): Install it.
3286 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3288 * aarch64-tdep.c (aarch64_prologue_cache) <available_p>: New
3290 (aarch64_make_prologue_cache_1): New function, factored out from
3291 aarch64_make_prologue_cache. Do not allocate cache. Set
3293 (aarch64_make_prologue_cache): Reimplement wrapping
3294 aarch64_make_prologue_cache_1, and swallowing
3295 NOT_AVAILABLE_ERROR.
3296 (aarch64_prologue_frame_unwind_stop_reason): New function.
3297 Return UNWIND_UNAVAILABLE if available_p is not set.
3298 (aarch64_prologue_unwind): Install it.
3299 (aarch64_prologue_this_id): Move prev_pc and prev_sp limit
3300 checks into aarch64_prologue_frame_unwind_stop_reason. Call
3301 frame_id_build_unavailable_stack if available_p is not set.
3303 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3305 * aarch64-tdep.c (aarch64_prologue_cache) <func, prev_pc>: New
3307 (aarch64_scan_prologue): Set prev_pc.
3308 (aarch64_make_prologue_cache): Set func.
3309 (aarch64_make_stub_cache): Set prev_pc.
3310 (aarch64_prologue_this_id): Remove local variables id, pc and
3311 func. Read prev_pc and func from cache.
3312 (aarch64_stub_this_id): Read prev_pc from cache.
3314 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3316 * aarch64-tdep.c (aarch64_make_stub_cache): Update comment. New
3317 argument this_cache. Remove unused local variables reg and
3318 unwound_fp. Return early if this_cache is already set. Set
3320 (aarch64_stub_this_id): Update call to aarch64_make_stub_cache.
3322 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3324 * aarch64-tdep.c (aarch64_make_prologue_cache): Update comment.
3325 New argument this_cache. Return early if this_cache is already
3326 set. Set this_cache.
3327 (aarch64_prologue_this_id): Update call to
3328 aarch64_make_prologue_cache.
3329 (aarch64_prologue_prev_register): Likewise.
3330 (aarch64_normal_frame_base): Likewise.
3332 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3334 * c-valprint.c (c_val_print): Factor out memberptr printing code
3335 from c_val_print to ...
3336 (c_val_print_memberptr): ... this new function.
3338 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3340 * c-valprint.c (c_val_print): Factor out int printing code to ...
3341 (c_val_print_int): ... this new function.
3343 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3345 * c-valprint.c (c_val_print): Factor out struct and union
3346 printing code to ...
3347 (c_val_print_struct): ... this new function ...
3348 (c_val_print_union): ... and this new function.
3350 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3352 * c-valprint.c (c_val_print): Factor out pointer printing code
3354 (c_val_print_ptr): ... this new function.
3356 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3358 * c-valprint.c (c_valprint): Factor our array printing code from
3360 (c_val_print_array): ... this new function.
3362 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3364 * c-valprint.c (c_val_print): Factor out pointer printing code
3366 (print_unpacked_pointer): ... this new function.
3368 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3370 * c-valprint.c (c_val_print): Remove an assignment to i and move
3373 2015-07-09 Yao Qi <yao.qi@linaro.org>
3375 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Add
3376 argument ptid. Update comments. Caller update.
3378 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
3380 * btrace.c (pt_print_packet): Print stop, vmcs, tma, mtc, cyc, and
3383 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
3385 * btrace.c (btrace_pt_readmem_callback): Change type of PC argument.
3387 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
3389 * progspace.c (delete_program_space): Add missing spaces.
3391 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
3393 * inferior.c (delete_inferior_1): Rename to ...
3394 (delete_inferior): ..., remove 'silent' parameter, delete
3395 program space when unused and remove call to prune_program_spaces.
3396 Remove the old, unused, delete_inferior.
3397 (delete_inferior_silent): Remove.
3398 (prune_inferiors): Change call from delete_inferior_1 to
3399 delete_inferior and remove 'silent' parameter. Remove call to
3400 prune_program_spaces.
3401 (remove_inferior_command): Idem.
3402 * inferior.h (delete_inferior_1): Rename to...
3403 (delete_inferior): ..., remove 'silent' parameter and remove the
3404 original delete_inferior.
3405 (delete_inferior_silent): Remove.
3406 * mi/mi-main.c (mi_cmd_remove_inferior): Change call from
3407 delete_inferior_1 to delete_inferior and remove 'silent'
3409 * progspace.c (prune_program_spaces): Remove.
3410 (pspace_empty_p): Rename to...
3411 (program_space_empty_p): ... and make non-static.
3412 (delete_program_space): New.
3413 * progspace.h (prune_program_spaces): Remove declaration.
3414 (program_space_empty_p): New declaration.
3415 (delete_program_space): New declaration.
3416 * monitor.c (monitor_close): Replace call to
3417 delete_thread_silent and delete_inferior_silent with
3418 discard_all_inferiors.
3420 2015-07-08 Patrick Palka <patrick@parcs.ath.cx>
3422 * defs.h (deprecated_register_changed_hook): Remove prototype.
3423 * interps.c (clear_iterpreter_hooks): Remove reference to
3424 deprecated_register_changed_hook.
3425 * top.c (deprecated_register_changed_hook): Remove prototype.
3426 * valops.c (value_assign): Remove reference to
3427 deprecated_register_changed_hook.
3428 * tui/tui-hooks.c (tui_register_changed): Add parameter "frame".
3429 Add comment documenting the function.
3430 (tui_register_changed_observer): Define.
3431 (tui_install_hooks): Remove reference to
3432 deprecated_register_changed_hook. Set
3433 tui_register_changed_observer.
3434 (tui_remove_hooks): Remove reference to
3435 deprecated_register_changed_hook. Unset
3436 tui_register_changed_observer.
3438 2015-07-08 Jan Kratochvil <jan.kratochvil@redhat.com>
3441 * compile/compile-c-types.c (insert_type): Change gdb_assert to error.
3443 2015-07-08 Robert O'Callahan <robert@ocallahan.org>
3446 * ax-gdb.c (gen_conversion): Extend to 'to' bits, not 'from'.
3448 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
3450 * MAINTAINERS (Write After Approval): Add Markus T. Metzger.
3452 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
3454 * nat/linux-btrace.c (kernel_supports_bts, kernel_supports_pt):
3455 Use safe_strerror() instead of strerror().
3457 2015-07-07 Yao Qi <yao.qi@linaro.org>
3459 * features/arm-with-m-fpa-layout.xml: Set architecture to arm.
3460 * features/arm-with-m-fpa-layout.c: Regenerated.
3461 * features/arm-with-m-vfp-d16.xml: Likewise.
3462 * features/arm-with-m-vfp-d16.c: Regenerated.
3463 * features/arm-with-m.xml: Likewise.
3464 * features/arm-with-m.c: Regenerated.
3465 * features/arm-with-neon.xml: Likewise.
3466 * features/arm-with-neon.c: Regenerated.
3467 * features/arm-with-vfpv2.xml: Likewise.
3468 * features/arm-with-vfpv2.c: Regenerated.
3469 * features/arm-with-vfpv3.xml: Likewise.
3470 * features/arm-with-vfpv3.c: Regenerated.
3472 2015-07-07 Yao Qi <yao.qi@linaro.org>
3474 * aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
3476 * aarch64-linux-nat.c: Include aarch32-linux-nat.h and
3478 (fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
3479 if target is 32-bit.
3480 (store_gregs_to_thread): Call aarch32_gp_regcache_collect
3481 if target is 32-bit.
3482 (fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
3483 if target is 32-bit.
3484 (store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
3485 if target is 32-bit.
3486 (tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
3487 (aarch64_linux_read_description): Return the right target
3489 * arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
3490 * config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
3491 * configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
3494 2015-07-07 Yao Qi <yao.qi@linaro.org>
3496 * aarch32-linux-nat.c: New file.
3497 * aarch32-linux-nat.h: New file.
3498 * arm-linux-nat.c: Include aarch32-linux-nat.h.
3499 (fetch_regs): Move code to aarch32-linux-nat.c. Call
3500 aarch32_gp_regcache_supply.
3501 (store_regs): Move code to aarch32-linux-nat.c. Call
3502 aarch32_gp_regcache_collect.
3503 (fetch_vfp_regs): Move code to aarch32-linux-nat.c. Call
3504 aarch32_vfp_regcache_supply.
3505 (store_vfp_regs): Move code to aarch32-linux-nat.c. Call
3506 aarch32_vfp_regcache_collect.
3507 * config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
3509 2015-07-07 Yao Qi <yao.qi@linaro.org>
3511 * arm-linux-nat.c (store_fpregister): Remove.
3512 (store_register): Likewise.
3513 (fetch_fpregister): Likewise.
3514 (fetch_register): Likewise.
3515 (arm_linux_store_inferior_registers): Call store_regs and
3516 store_fpregs instead.
3517 (arm_linux_fetch_inferior_registers): Call fetch_fpregs and
3520 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3522 * doc/gdb.texinfo (TUI): Restructure documentation on TUI layout
3525 2015-07-06 Joel Brobecker <brobecker@adacore.com>
3527 * NEWS: Create a new section for the next release branch.
3528 Rename the section of the current branch, now that it has
3531 2015-07-06 Joel Brobecker <brobecker@adacore.com>
3533 GDB 7.10 branch created (66c4b3e8a628a207bc6aafef6af0c4128195f56e):
3534 * version.in: Bump version to 7.10.50.DATE-cvs.
3536 2015-07-06 Luis Machado <lgustavo@codesourcery.com>
3538 * breakpoint.c (remove_breakpoint_1): Don't handle permanent
3539 breakpoints in a special way.
3540 (remove_breakpoint): Likewise.
3541 (mark_breakpoints_out): Likewise.
3543 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3545 * doc/gdb.texinfo (TUI): Add comma after @xref.
3547 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3549 * tui/tui-win.c (tui_set_focus): Use structure member 'generic'
3550 instead of casting the structure type.
3552 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
3554 * valops.c (search_struct_field): Remove OFFSET parameter.
3555 (value_cast_structs): Adjust calls to search_struct_field.
3556 (value_struct_elt): Same.
3557 (find_overload_match): Same.
3559 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
3561 * value.c (value_fetch_lazy): Update comment, change return
3563 * value.h (value_fetch_lazy): Change return value to void.
3565 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3567 * tui/tui-data.c (tui_partial_win_by_name): Window name is const.
3568 (tui_win_name): Make parameter and result const.
3569 * tui/tui-data.h (tui_win_name): Make parameter and result const.
3571 2015-07-06 Patrick Palka <patrick@parcs.ath.cx>
3573 * i386-tdep.c (i386_mpx_info_bounds): Don't call error, instead
3574 use printf_unfiltered.
3575 (set_mpx_cmd): Add missing trailing space to command string
3577 (_initialize_i386_tdep): Give the "mpx" prefix command its
3580 2015-07-02 Kevin Buettner <kevinb@redhat.com>
3582 * rx-tdep.c (RX_USP_REGNUM, RX_BPC_REGNUM): New constants.
3583 (enum rx_frame_type): New.
3584 (struct rx_prologue): Add new field `frame_type'.
3585 (rx_analyze_prologue): Add `frame_type' parameter. Cache this
3586 parameter in the prologue struct. Add code for recording
3587 locations of PC and PSW for fast interrupt and exception frames.
3588 (rx_skip_prologue): Adjust call to rx_analyze_prologue.
3589 (rx_analyze_frame_prologue): Add `frame_type' parameter.
3590 (rx_frame_type): New function.
3591 (rx_frame_base): Fetch frame type and pass it to rx_analyze_prologue.
3592 (rx_frame_this_id): Rename parameter `this_prologue_cache' to
3594 (rx_frame_prev_register): Rename parameter `this_prologue_cache' to
3595 `this_cache'. Add cases for RX_FRAME_TYPE_EXCEPTION and
3596 RX_FRAME_TYPE_FAST_INTERRUPT.
3597 (normal_frame_p, exception_frame_p, rx_frame_sniffer_common)
3598 (rx_frame_sniffer, rx_exception_sniffer): New functions.
3599 (rx_frame_unwind): Use rx_frame_sniffer instead of
3600 default_frame_sniffer.
3601 (rx_frame_unwind): New unwinder.
3602 (rx_gdbarch_init): Register new unwinder.
3604 2015-07-02 Kevin Buettner <kevinb@redhat.com>
3606 * rx-tdep.c (RX_BPSW_REGNUM, RX_FPSW_REGNUM): New constants.
3607 (struct gdbarch_tdep): Add fields rx_psw_type and rx_fpsw_type.
3608 (rx_register_type): Add cases for RX_PSW_REGNUM, RX_BPSW_REGNUM,
3610 (rx_gdbarch_init): Initialize PSW, BPSW, and FPSW flags types.
3612 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3614 Fix GCC false warning.
3615 * s390-linux-tdep.c (s390_handle_arg): Initialize VAL.
3617 2015-07-02 Yao Qi <yao.qi@linaro.org>
3619 * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix
3620 typo in the debugging message.
3622 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3624 * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h.
3625 (maint_btrace_cmdlist, maint_btrace_set_cmdlist)
3626 (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist)
3627 (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad)
3628 (btrace_maint_clear): New.
3629 (btrace_fetch, btrace_clear): Call btrace_maint_clear.
3630 (pt_print_packet, btrace_maint_decode_pt)
3631 (btrace_maint_update_pt_packets, btrace_maint_update_packets)
3632 (btrace_maint_print_packets, get_uint, get_context_size, no_chunk)
3633 (maint_btrace_packet_history_cmd)
3634 (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd)
3635 (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd)
3636 (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd)
3637 (maint_info_btrace_cmd, _initialize_btrace): New.
3638 * btrace.h (btrace_pt_packet, btrace_pt_packet_s)
3639 (btrace_maint_packet_history, btrace_maint_info): New.
3640 (btrace_thread_info) <maint>: New.
3641 * NEWS: Announce it.
3643 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3645 * btrace.c (btrace_fetch): Append the new trace data.
3646 (btrace_clear): Clear the stored trace data.
3647 * btrace.h (btrace_thread_info) <data>: New.
3648 * common/btrace-common.h (btrace_data_clear)
3649 (btrace_data_append): New.
3650 * common/btrace-common.c (btrace_data_clear)
3651 (btrace_data_append): New.
3653 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3655 * nat/linux-btrace.c (linux_enable_bts): Check for
3656 PERF_ATTR_SIZE_VER5.
3657 Check for data_offset and data_size fields. Use them.
3659 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3661 * NEWS: Announce new commands "record btrace pt" and "record pt".
3662 Announce new options "set|show record btrace pt buffer-size".
3663 * btrace.c: Include "rsp-low.h".
3664 Include "inttypes.h".
3665 (btrace_add_pc): Add forward declaration.
3666 (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
3667 (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
3668 (btrace_compute_ftrace_pt): New.
3669 (btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
3670 (check_xml_btrace_version): Update version check.
3671 (parse_xml_raw, parse_xml_btrace_pt_config_cpu)
3672 (parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
3673 (btrace_pt_config_cpu_attributes, btrace_pt_config_children)
3674 (btrace_pt_children): New.
3675 (btrace_children): Add support for "pt".
3676 (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
3677 (btrace_conf_children): Add support for "pt".
3678 * btrace.h: Include "intel-pt.h".
3679 (btrace_pt_error): New.
3680 * common/btrace-common.c (btrace_format_string, btrace_data_fini)
3681 (btrace_data_empty): Support BTRACE_FORMAT_PT.
3682 * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
3683 (struct btrace_config_pt): New.
3684 (struct btrace_config)<pt>: New.
3685 (struct btrace_data_pt_config, struct btrace_data_pt): New.
3686 (struct btrace_data)<pt>: New.
3687 * features/btrace-conf.dtd (btrace-conf)<pt>: New.
3689 * features/btrace.dtd (btrace)<pt>: New.
3690 (pt, pt-config, cpu): New.
3691 * nat/linux-btrace.c (perf_event_read, perf_event_read_all)
3692 (perf_event_pt_event_type, kernel_supports_pt)
3693 (linux_supports_pt): New.
3694 (linux_supports_btrace): Support BTRACE_FORMAT_PT.
3695 (linux_enable_bts): Free tinfo on error.
3696 (linux_enable_pt): New.
3697 (linux_enable_btrace): Support BTRACE_FORMAT_PT.
3698 (linux_disable_pt): New.
3699 (linux_disable_btrace): Support BTRACE_FORMAT_PT.
3700 (linux_fill_btrace_pt_config, linux_read_pt): New.
3701 (linux_read_btrace): Support BTRACE_FORMAT_PT.
3702 * nat/linux-btrace.h (struct btrace_tinfo_pt): New.
3703 (struct btrace_target_info)<pt>: New.
3704 * record-btrace.c (set_record_btrace_pt_cmdlist)
3705 (show_record_btrace_pt_cmdlist): New.
3706 (record_btrace_print_pt_conf): New.
3707 (record_btrace_print_conf): Support BTRACE_FORMAT_PT.
3708 (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
3709 (cmd_record_btrace_pt_start): New.
3710 (cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
3711 (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
3712 (_initialize_record_btrace): Add new commands.
3713 * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
3714 (remote_protocol_features): Add "Qbtrace:pt".
3715 Add "Qbtrace-conf:pt:size".
3716 (remote_supports_btrace): Support BTRACE_FORMAT_PT.
3717 (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
3718 (remote_enable_btrace): Support BTRACE_FORMAT_PT.
3719 (_initialize_remote): Add new commands.
3721 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3723 * configure.ac: check for libipt
3724 * configure: Regenerate.
3725 * config.in: Regenerate.
3726 * Makefile.in (LIBIPT): New.
3727 (CLIBS): Add $LIBIPT.
3728 * NEWS: document new configure options
3730 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3732 * compile/compile-object-load.c (compile_object_load): Replace debug
3733 message "lookup undefined ELF symbol" by 3 more specific messages.
3735 2015-07-01 Kevin Buettner <kevinb@redhat.com>
3737 * rl78-tdep.c (struct gdbarch_tdep): Add new field, rl78_psw_type.
3738 (rl78_register_type): Add case for RL78_PSW_REGNUM.
3739 (rl78_gdbarch_init): Initialize rl78_psw_type.
3741 2015-07-01 Patrick Palka <patrick@parcs.ath.cx>
3743 * tui/tui-hooks.c (tui_refresh_frame_and_register_information):
3744 Update commentary. Always refresh the registers when frame
3745 information has changed.
3746 * tui/tui-stack.c (tui_show_frame_info): Update commentary.
3747 Change return type to int. Return 1 if frame information has
3748 changed, 0 otherwise.
3749 (tui_before_prompt): Update commentary.
3750 * tui/tui-stack.h (tui_show_frame_info): Change return type to
3753 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
3756 * frame.c (select_frame): Remove reference to
3757 deprecated_selected_frame_level_changed_hook.
3758 * frame.h (deprecated_selected_frame_level_changed_hook): Remove
3760 * stack.c (deprecated_selected_frame_level_changed_hook):
3762 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
3764 (tui_refresh_frame_and_register_information): ... this. Bail
3765 out if there is no stack. Don't update register information
3766 unless registers_too_p is true.
3767 (tui_print_frame_info_listing_hook): Rename to ...
3768 (tui_dummy_print_frame_info_listing_hook): ... this.
3769 (tui_before_prompt): New function.
3770 (tui_normal_stop): New function.
3771 (tui_before_prompt_observer): New observer.
3772 (tui_normal_stop_observer): New observer.
3773 (tui_install_hooks): Set
3774 deprecated_print_frame_info_listing_hook to
3775 tui_dummy_print_frame_info_listing_hook. Register
3776 tui_before_prompt_observer to call tui_before_prompt and
3777 tui_normal_stop_observer to call tui_normal_stop. Remove
3778 reference to deprecated_selected_frame_level_changed_hook.
3779 (tui_remove_hooks): Detach and unset tui_before_prompt_observer
3780 and tui_normal_stop_observer. Remove reference to
3781 deprecated_selected_frame_level_changed_hook.
3783 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
3786 * tui/tui-stack.c (tui_set_locator_info): Change prototype to
3787 return an int instead of void. Return whether the locator
3789 (tui_show_frame_info): If the locator info has not changed, then
3790 bail out early to avoid refreshing the windows.
3792 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
3794 * tui/tui-stack.c (tui_set_locator_info): Explicitly pass
3795 LOCATOR_WIN to tui_alloc_content.
3797 2015-06-30 Yao Qi <yao.qi@linaro.org>
3800 * arm-tdep.c (arm_get_next_pc_raw): Break for media
3803 2015-06-29 Kevin Buettner <kevinb@redhat.com>
3805 * rx-tdep.c (RX_PSW_REGNUM): New enum constant.
3806 (rx_dwarf_reg_to_regnum): New function.
3807 (rx_gdbarch_init): Register rx_dwarf_reg_to_regnum. Use dwarf2
3810 2015-06-29 Pedro Alves <palves@redhat.com>
3813 * infcall.c (run_inferior_call): On infcall success, if the thread
3814 was marked stopped before, reset it back to stopped.
3815 * infrun.c (resume): Don't suppress the set_running calls when
3817 (normal_stop): Only discard the finish_thread_state cleanup if the
3820 2015-06-29 Pierre Langlois <pierre.langlois@arm.com>
3822 * MAINTAINERS (Write After Approval): Update my email address.
3824 2015-06-26 Keith Seitz <keiths@redhat.com>
3825 Doug Evans <dje@google.com>
3828 * block.c (block_lookup_symbol): For non-function blocks,
3829 continue to search for a symbol with an exact domain match
3830 Otherwise, return any previously found "best domain" symbol.
3831 (block_lookup_symbol_primary): Likewise.
3833 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
3835 * NEWS: Mention the new option "history remove-duplicates".
3836 * top.c (history_remove_duplicates): New static variable.
3837 (show_history_remove_duplicates): New static function.
3838 (gdb_add_history): Conditionally remove duplicate history
3840 (init_main): Add "history remove-duplicates" option.
3842 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
3844 * tui/tui-win.c (focus_completer): New static function.
3845 (_initialize_tui_win): Set the completion function of the
3846 "focus" command to focus_completer.
3848 2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3850 * linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
3852 * symtab.c (find_function_start_sal): Likewise.
3854 2015-06-25 Gary Benson <gbenson@redhat.com>
3856 * solib.c (solib_find_1): Set local variable sysroot to NULL if
3857 it is the empty string after trailing slashes have been stripped.
3859 2015-06-25 Gary Benson <gbenson@redhat.com>
3861 * exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
3862 * infrun.c (follow_exec): Likewise.
3863 * remote.c (remote_filesystem_is_local): Likewise.
3864 * solib.c (solib_find_1): Likewise.
3866 2015-06-24 Keith Seitz <keiths@redhat.com>
3868 * build-id.c (build_id_to_debug_bfd): Add cleanup to free
3869 return value from lrealpath.
3871 2015-06-24 Mike Frysinger <vapier@gentoo.org>
3873 * remote-sim.c (gdbsim_open): Move sysroot update to the top.
3875 2015-06-24 Mike Frysinger <vapier@gentoo.org>
3877 * remote-sim.c: Include gdb_bfd.h.
3878 (gdbsim_open): Declare new local sysroot pointing to gdb_sysroot.
3879 Skip TARGET_SYSROOT_PREFIX in gdb_sysroot when it is active.
3881 2015-06-24 Yao Qi <yao.qi@linaro.org>
3883 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
3884 set_gdbarch_get_siginfo_type.
3885 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
3886 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
3887 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
3888 * m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
3889 * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
3890 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
3891 * tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
3892 * linux-tdep.c (linux_get_siginfo_type): Change it to static.
3893 (linux_init_abi): Call set_gdbarch_get_siginfo_type.
3894 * linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
3896 2015-06-24 Gary Benson <gbenson@redhat.com>
3898 * common/buffer.c (stdint.h): Do not include.
3899 * common/print-utils.c (stdint.h): Likewise.
3900 * compile/compile-c-symbols.c (gdb_assert.h): Likewise.
3901 * compile/compile-c-types.c (gdb_assert.h): Likewise.
3902 * ft32-tdep.c (gdb_assert.h): Likewise.
3903 * guile/scm-utils.c (stdint.h): Likewise.
3904 * i386-linux-tdep.c (stdint.h): Likewise.
3905 * i386-tdep.c (stdint.h): Likewise.
3906 * nat/linux-btrace.c (stdint.h): Likewise.
3907 * nat/linux-btrace.h (stdint.h): Likewise.
3908 * nat/linux-ptrace.c (stdint.h): Likewise.
3909 * nat/mips-linux-watch.h (stdint.h): Likewise.
3910 * ppc-linux-nat.c (stdint.h): Likewise.
3911 * python/python-internal.h (stdint.h): Likewise.
3912 * stub-termcap.c (stdlib.h): Likewise.
3913 * target/target.h (stdint.h): Likewise.
3914 * xtensa-linux-nat.c (stdint.h): Likewise.
3916 2015-06-23 Patrick Palka <patrick@parcs.ath.cx>
3918 * top.c (init_history): Look at errno after calling strtol to
3919 properly map large GDBHISTSIZE values to infinity.
3921 2015-06-23 Doug Evans <dje@google.com>
3923 * inferior.h (struct inferior_suspend_state): Delete, unused.
3924 All references deleted.
3926 2015-06-23 Mike Frysinger <vapier@gentoo.org>
3928 * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
3929 (microblaze_push_dummy_call): Likewise.
3930 (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
3931 and set_gdbarch_push_dummy_call.
3933 2015-06-23 Yao Qi <yao.qi@linaro.org>
3935 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
3936 Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
3937 (amd64_linux_store_inferior_registers): Likewise.
3938 * arm-linux-nat.c (fetch_fpregister): Likewise.
3939 (fetch_fpregs, store_fpregister): Likewise.
3940 (store_fpregister, store_fpregs): Likewise.
3941 (fetch_register, fetch_regs): Likewise.
3942 (store_register, store_regs): Likewise.
3943 (fetch_vfp_regs, store_vfp_regs): Likewise.
3944 (arm_linux_read_description): Check have_ptrace_getregset is
3945 TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
3947 * i386-linux-nat.c (fetch_xstateregs): Check
3948 have_ptrace_getregset is not TRIBOOL_TRUE.
3949 (store_xstateregs): Likewise.
3950 * linux-nat.c (have_ptrace_getregset): Change its type to
3952 * linux-nat.h (tribool): New enum.
3953 * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
3954 Check whether have_ptrace_getregset is TRIBOOL_TRUE.
3956 2015-06-19 Doug Evans <dje@google.com>
3958 * NEWS: Mention Sun's version of stabs is no longer supported.
3959 * elfread.c (free_elfinfo): Delete. All uses updated.
3960 (elfstab_offset_sections): Delete. All uses updated.
3961 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
3962 * psympriv.h (partial_symtab) <section_offsets>: Delete.
3964 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
3965 All callers updated.
3967 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
3969 * common/rsp-low.c (needs_escaping): New.
3970 (remote_escape_output): Add unit_size parameter. Refactor to
3971 support multi-byte addressable units. Rename parameters.
3972 * common/rsp-low.h (remote_escape_output): Add unit_size
3973 parameter and rename others. Update doc.
3974 * remote.c (align_for_efficient_write): New.
3975 (remote_write_bytes_aux): Add unit_size parameter and use it.
3976 Rename some variables. Update doc.
3977 (remote_xfer_partial): Get unit size and use it.
3978 (remote_read_bytes_1): Add unit_size parameter and use it.
3979 Rename some variables. Update doc.
3980 (remote_write_bytes): Same.
3981 (remote_xfer_live_readonly_partial): Same.
3982 (remote_read_bytes): Same.
3983 (remote_flash_write): Update call to remote_write_bytes_aux.
3984 (remote_write_qxfer): Update call to remote_escape_output.
3985 (remote_search_memory): Same.
3986 (remote_hostio_pwrite): Same.
3988 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
3990 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
3991 locations as inserted.
3992 Update and expand comment about permanent locations.
3993 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
3994 Move comment to add_location_to_breakpoint.
3995 (update_global_location_list): Don't error out if a permanent
3996 breakpoint is not marked inserted.
3997 Don't error out if a non-permanent breakpoint location is inserted on
3998 top of a permanent breakpoint.
4000 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
4002 * breakpoint.c (make_breakpoint_permanent): Remove unused
4004 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
4006 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
4009 * NEWS: Mention new GDBHISTSIZE behavior.
4010 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
4011 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
4013 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
4015 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
4016 * top.c (init_history): Read from GDBHISTSIZE instead of
4018 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
4020 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
4022 * top.c (gdb_safe_append_history): Do not call
4023 history_truncate_file if the history is not stifled.
4025 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
4027 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
4028 * syscalls/s390x-linux.xml: Likewise.
4030 2015-06-16 Michael Eager <eager@eagercon.com>
4032 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
4034 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
4036 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
4037 target_terminal_ours_for_output() before calling
4038 tui_show_frame_info(), and restore the original terminal
4039 settings afterwards.
4041 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
4043 * arm-linux-nat.c: Include nat/linux-ptrace.h.
4045 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
4047 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
4049 (mi_cmd_data_write_memory_bytes): Same.
4051 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
4053 * corefile.c (write_memory): Update doc.
4054 * gdbcore.h (write_memory): Same.
4056 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
4058 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
4059 (dump_mapping_p): Use it for parameter filterflags.
4060 (linux_find_memory_regions_full): Use it for variable filterflags.
4062 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
4063 Jan Kratochvil <jan.kratochvil@redhat.com>
4065 Merge multiple hex conversions.
4066 * monitor.c: Include rsp-low.h.
4067 (fromhex): Remove definition.
4069 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
4070 Jan Kratochvil <jan.kratochvil@redhat.com>
4072 Move utility functions to common/.
4073 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
4074 Move defs to common/common-utils.c.
4075 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
4076 (skip_to_space_const): Move decls to common/common-utils.h.
4077 * common/common-defs.h: Move include of common-types.h before
4079 * common/common-utils.c: Include host-defs.h and ctype.h.
4080 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
4082 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
4084 * common/common-utils.h (strtoulst): Move decl from utils.h.
4085 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
4086 Move from cli/cli-utils.h.
4087 * common/host-defs.h: Include limits.h.
4088 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
4089 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
4090 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
4091 common/common-utils.h.
4092 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
4093 (strtoulst): Move to common/common-utils.c.
4094 * utils.h (strtoulst): Moved decl to common/common-utils.h.
4096 2015-06-15 Yao Qi <yao.qi@linaro.org>
4098 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
4100 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
4102 * build-id.c: Don't include elf-bfd.h.
4103 (build_id_bfd_get): Use bfd_build_id.
4104 (build_id_verify): Ditto.
4105 * build-id.h: Ditto.
4106 (find_separate_debug_file_by_buildid): Ditto.
4107 * python/py-objfile.c: Don't include elf-bfd.h.
4108 (objfpy_get_build_id) Use bfd_build_id.
4109 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
4110 * coffread.c: Include build-id.h.
4111 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
4113 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
4115 * windows-nat.c (do_windows_fetch_inferior_registers)
4116 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
4117 conditional with __CYGWIN__.
4119 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
4121 * completer.c: Add arch-utils.h include.
4122 (enum reg_completer_targets): New enum.
4123 (reg_or_group_completer_1): New function containing old
4124 reg_or_group_completer, add and use new parameter to control what
4125 is completed on. Use get_current_arch rather than architecture of
4126 currently selected frame.
4127 (reg_or_group_completer): Call new reg_or_group_completer_1.
4128 (reggroup_completer): Call new reg_or_group_completer_1.
4129 * completer.h (reggroup_completer): Add declaration.
4130 * tui/tui-regs.c: Add 'completer.h' include.
4131 (tui_reg_next_command): Renamed to...
4132 (tui_reg_next): ...this. Adjust parameters and return rather than
4134 (tui_reg_prev_command): Renamed to...
4135 (tui_reg_prev): ...this. Adjust parameters and return rather than
4137 (tui_reg_float_command): Delete.
4138 (tui_reg_general_command): Delete.
4139 (tui_reg_system_command): Delete.
4140 (tui_reg_command): Rewrite to perform switching of register group.
4142 (tuireglist): Remove.
4143 (tui_reggroup_completer): New function.
4144 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
4145 creation of 'tui reg' command.
4146 * NEWS: Add comment about 'tui reg' changes.
4148 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
4150 * target.c (target_read): Consider addressable unit size when
4151 reading from a memory object.
4152 (read_memory_robust): Same.
4153 (read_whatever_is_readable): Same.
4154 (target_write_with_progress): Consider addressable unit size
4155 when writing to a memory object.
4156 * target.h (target_read): Update documentation.
4157 (target_write): Add documentation.
4159 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
4161 * arch-utils.h (default_addressable_memory_unit_size): New.
4162 * arch-utils.c (default_addressable_memory_unit_size): New.
4163 * gdbarch.sh (addressable_memory_unit_size): New.
4164 * gdbarch.h: Re-generate.
4165 * gdbarch.c: Re-generate.
4167 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
4169 * target.c (target_read): Rename variables and use
4171 (target_read_with_progress): Same.
4172 (read_memory_robust): Constify parameters and rename
4174 (read_whatever_is_readable): Constify parameters,
4175 rename variables, adjust formatting.
4176 * target.h (read_memory_robust): Constify parameters.
4178 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
4180 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
4181 synthetic (non-AltiVec) vector types.
4182 (ppc64_sysv_abi_return_value): Likewise.
4184 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
4186 PR breakpoints/16465
4187 * breakpoint.c (create_breakpoint): Save extra_string for
4188 pending breakpoints.
4190 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
4192 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
4193 and bt_mask to CORE_ADDR.
4195 2015-06-11 Gary Benson <gbenson@redhat.com>
4197 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
4198 (mnsh_recv_message): Likewise.
4200 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
4202 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
4203 long long int and plongest instead of %ll.
4205 2015-06-11 Gary Benson <gbenson@redhat.com>
4207 * nat/linux-namespaces.c (gdb_wait.h): New include.
4208 (sys/wait.h): Do not include.
4210 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
4212 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
4213 end_sequence is true.
4215 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
4218 * solib-target.c (library_list_start_list): Use explicit NULL
4221 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
4223 * solib-target.c (library_list_start_list): Do not dereference
4224 variable version in its initialization. Make the VERSION check handle
4226 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
4228 2015-06-10 Gary Benson <gbenson@redhat.com>
4230 * NEWS: Announce support for direct access of executable and
4231 shared library files when attaching to inferiors in containers
4232 on GNU/Linux systems.
4234 2015-06-10 Gary Benson <gbenson@redhat.com>
4236 * remote.c (struct remote_state) <fs_pid>: New field.
4237 (new_remote_state): Initialize the above.
4238 (PACKET_vFile_setfs): New enum value.
4239 (remote_hostio_set_filesystem): New function.
4240 (remote_hostio_open): Call the above.
4241 (remote_hostio_unlink): Likewise.
4242 (remote_hostio_readlink): Likewise.
4243 (_initialize_remote): Register new "set/show remote
4244 hostio-setfs-packet" command.
4245 * NEWS: Announce new vFile:setfs packet.
4247 2015-06-10 Gary Benson <gbenson@redhat.com>
4249 * linux-nat.c (nat/linux-namespaces.h): New include.
4250 (fileio.h): Likewise.
4251 (linux_nat_filesystem_is_local): New function.
4252 (linux_nat_fileio_pid_of): Likewise.
4253 (linux_nat_fileio_open): Likewise.
4254 (linux_nat_fileio_readlink): Likewise.
4255 (linux_nat_fileio_unlink): Likewise.
4256 (linux_nat_add_target): Initialize to_filesystem_is_local,
4257 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
4258 (_initialize_linux_nat): New "set/show debug linux-namespaces"
4260 * NEWS: Mention new "set/show debug linux-namespaces" commands.
4262 2015-06-10 Gary Benson <gbenson@redhat.com>
4264 * target.h (struct inferior): New forward declaration.
4265 (struct target_ops) <to_filesystem_is_local>: Update comment.
4266 (struct target_ops) <to_fileio_open>: New argument inf.
4267 Update comment. All implementations updated.
4268 (struct target_ops) <to_fileio_unlink>: Likewise.
4269 (struct target_ops) <to_fileio_readlink>: Likewise.
4270 (target_filesystem_is_local): Update comment.
4271 (target_fileio_open): New argument inf. Update comment.
4272 (target_fileio_unlink): Likewise.
4273 (target_fileio_readlink): Likewise.
4274 (target_fileio_read_alloc): Likewise.
4275 (target_fileio_read_stralloc): Likewise.
4276 * target.c (target_fileio_open): New argument inf.
4277 Pass inf to implementation. Update debug printing.
4278 (target_fileio_unlink): Likewise.
4279 (target_fileio_readlink): Likewise.
4280 (target_fileio_read_alloc_1): New argument inf. Pass inf
4281 to target_fileio_open.
4282 (target_fileio_read_alloc): New argument inf. Pass inf to
4283 target_fileio_read_alloc_1.
4284 (target_fileio_read_stralloc): Likewise.
4285 * gdb_bfd.c (inferior.h): New include.
4286 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
4287 argument with new argument "inferior". Pass inferior to
4289 (gdb_bfd_open): Supply inferior argument to
4290 gdb_bfd_iovec_fileio_open.
4291 * linux-tdep.c (linux_info_proc): Supply inf argument to
4292 relevant target_fileio calls.
4293 (linux_find_memory_regions_full): Likewise.
4294 (linux_fill_prpsinfo): Likewise.
4295 * remote.c (remote_filesystem_is_local): Supply inf
4296 argument to remote_hostio_open.
4297 (remote_file_put): Likewise.
4298 (remote_file_get): Likewise.
4299 (remote_file_delete): Supply inf argument to
4300 remote_hostio_unlink.
4302 2015-06-10 Gary Benson <gbenson@redhat.com>
4304 * inf-child.c (inf_child_fileio_open): Replace comment.
4305 (inf_child_fileio_pwrite): Likewise.
4306 (inf_child_fileio_pread): Likewise.
4307 (inf_child_fileio_fstat): Insert blank line before comment.
4308 (inf_child_fileio_close): Replace comment.
4309 (inf_child_fileio_unlink): Likewise.
4310 (inf_child_fileio_readlink): Likewise.
4311 * remote.c (remote_hostio_open): Likewise.
4312 (remote_hostio_pread): Likewise.
4313 (remote_hostio_pwrite): Likewise.
4314 (remote_hostio_close): Likewise.
4315 (remote_hostio_unlink): Likewise.
4316 (remote_hostio_readlink): Likewise.
4317 (remote_hostio_fstat): Likewise.
4318 (remote_filesystem_is_local): Likewise.
4319 * target.c (target_fileio_open): Likewise.
4320 (target_fileio_pwrite): Likewise.
4321 (target_fileio_pread): Likewise.
4322 (target_fileio_fstat): Insert blank line before comment.
4323 (target_fileio_close): Replace comment.
4324 (target_fileio_unlink): Likewise.
4325 (target_fileio_readlink): Likewise.
4326 (target_fileio_read_alloc): Likewise.
4327 (target_fileio_read_stralloc): Likewise.
4329 2015-06-10 Gary Benson <gbenson@redhat.com>
4331 * linux-thread-db.c (nat/linux-namespaces.h): New include.
4332 (check_pid_namespace_match): Use linux_ns_same rather than
4333 linux_proc_pid_get_ns to spot PID namespace mismatches.
4334 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
4335 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
4337 2015-06-10 Gary Benson <gbenson@redhat.com>
4339 * configure.ac (AC_CHECK_FUNCS): Add setns.
4340 * config.in: Regenerate.
4341 * configure: Likewise.
4342 * nat/linux-namespaces.h: New file.
4343 * nat/linux-namespaces.c: Likewise.
4344 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
4345 (linux-namespaces.o): New rule.
4346 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
4347 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
4348 * config/arm/linux.mh (NATDEPFILES): Likewise.
4349 * config/i386/linux.mh (NATDEPFILES): Likewise.
4350 * config/i386/linux64.mh (NATDEPFILES): Likewise.
4351 * config/ia64/linux.mh (NATDEPFILES): Likewise.
4352 * config/m32r/linux.mh (NATDEPFILES): Likewise.
4353 * config/m68k/linux.mh (NATDEPFILES): Likewise.
4354 * config/mips/linux.mh (NATDEPFILES): Likewise.
4355 * config/pa/linux.mh (NATDEPFILES): Likewise.
4356 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
4357 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
4358 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
4359 * config/s390/linux.mh (NATDEPFILES): Likewise.
4360 * config/sparc/linux.mh (NATDEPFILES): Likewise.
4361 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
4362 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
4363 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
4365 2015-06-10 Gary Benson <gbenson@redhat.com>
4367 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
4368 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
4369 (make_cleanup_close): Likewise.
4370 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
4371 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
4372 (make_cleanup_close): Likewise.
4374 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
4376 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
4377 from SuspendThread().
4379 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
4381 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
4382 from OutputDebugString.
4384 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
4385 Mircea Gherzan <mircea.gherzan@intel.com>
4387 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
4388 MPX_BT_MASK_32): New macros.
4389 (i386_mpx_set_bounds): New function that implements
4390 the command "set-mpx-bound".
4391 (i386_mpx_enabled): Helper function to test MPX availability.
4392 (i386_mpx_bd_base): Helper function to calculate the base directory
4394 (i386_mpx_get_bt_entry): Helper function to access a bound
4396 (i386_mpx_print_bounds): Effectively display bound information.
4397 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
4399 (_initialize_i386_tdep):
4400 Add "bound" to the commands "show mpx" and "set mpx" commands.
4401 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
4402 and "show mpx" commands.
4403 * NEWS: List new commands for MPX support.
4405 2015-06-09 Gary Benson <gbenson@redhat.com>
4407 * common/fileio.h (fileio_to_host_mode): New declaration.
4408 * common/fileio.c (fileio_to_host_mode): New Function.
4409 * inf-child.c (inf_child_fileio_open): Process mode argument
4410 with fileio_to_host_mode.
4412 2015-06-09 Gary Benson <gbenson@redhat.com>
4414 * common/fileio.c (fileio_mode_pack): Fix preprocessor
4417 2015-06-05 Gary Benson <gbenson@redhat.com>
4419 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
4420 * remote.c (remote_filesystem_is_local): ...here.
4422 2015-06-04 Yao Qi <yao.qi@linaro.org>
4424 * gdbarch.c: Regenerate it.
4426 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4428 * arch-utils.c (default_infcall_munmap): New.
4429 * arch-utils.h (default_infcall_munmap): New declaration.
4430 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
4431 (munmap_list_free, munmap_listp_free_cleanup): New.
4432 (struct setup_sections_data): Add field munmap_list_headp.
4433 (setup_sections): Call munmap_list_add.
4434 (compile_object_load): New variable munmap_list_head, initialize
4435 setup_sections_data.munmap_list_headp, return munmap_list_head.
4436 * compile/compile-object-load.h (struct munmap_list): New declaration.
4437 (struct compile_module): Add field munmap_list_head.
4438 (munmap_list_free): New declaration.
4439 * compile/compile-object-run.c (struct do_module_cleanup): Add field
4441 (do_module_cleanup): Call munmap_list_free.
4442 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
4443 * gdbarch.c: Regenerate.
4444 * gdbarch.h: Regenerate.
4445 * gdbarch.sh (infcall_munmap): New.
4446 * linux-tdep.c (linux_infcall_munmap): New.
4447 (linux_init_abi): Install it.
4449 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
4452 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
4454 2015-06-02 Yao Qi <yao.qi@linaro.org>
4456 * i386-linux-nat.c: Include linux-nat.h.
4458 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
4459 Jan Kratochvil <jan.kratochvil@redhat.com>
4462 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
4464 * dwarf2loc.c (chain_candidate): Likewise.
4466 2015-06-01 Yao Qi <yao.qi@linaro.org>
4468 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
4469 (store_vfp_regs): Use PTRACE_SETREGSET.
4471 2015-06-01 Yao Qi <yao.qi@linaro.org>
4473 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
4474 (fetch_fpregs): Likewise.
4475 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
4476 (store_fpregs): Likewise.
4478 2015-06-01 Yao Qi <yao.qi@linaro.org>
4480 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
4481 (fetch_regs): Likewise.
4482 (store_regs): Use PTRACE_SETREGSET.
4483 (store_register): Likewise.
4485 2015-06-01 Yao Qi <yao.qi@linaro.org>
4487 * arm-linux-nat.c (arm_linux_read_description): Check whether
4488 kernel supports PTRACE_GETREGSET.
4490 2015-06-01 Yao Qi <yao.qi@linaro.org>
4492 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
4493 * linux-nat.c: ... here.
4494 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
4496 * linux-nat.h: ... here.
4498 2015-06-01 Yao Qi <yao.qi@linaro.org>
4500 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
4501 * i386-linux-nat.c: Likewise.
4502 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
4503 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
4504 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
4505 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
4506 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
4508 2015-05-30 Eli Zaretskii <eliz@gnu.org>
4510 * go32-nat.c (go32_xfer_memory): Fix the return value to be
4511 compatible to what read_child and write_child return. This
4512 unbreaks that DJGPP build of GDB which was broken since v7.7.
4514 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
4516 * MAINTAINERS (Write After Approval): Add Martin Galvan.
4518 2015-05-29 Roland McGrath <mcgrathr@google.com>
4521 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
4522 rather than internal_error for an unrecognized value.
4524 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
4526 * xtensa-tdep.c (xtensa_pseudo_register_read)
4527 (xtensa_pseudo_register_write): Don't alias last pseudo register
4530 2015-05-28 Don Breazeal <donb@codesourcery.com>
4532 * infrun.c (follow_fork_inferior): Ensure the use of
4533 process-style ptids (pid,0,0) in verbose/debug "Detaching"
4536 2015-05-28 Doug Evans <dje@google.com>
4538 * dwarf2read.c (record_line_ftype): Remove, duplicate.
4540 2015-05-28 Yao Qi <yao.qi@linaro.org>
4542 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
4543 (arm_linux_fetch_inferior_registers): Use
4544 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
4545 (arm_linux_store_inferior_registers): Likewise.
4546 (arm_linux_read_description): Don't set
4547 arm_linux_has_wmmx_registers.
4548 * arm-tdep.c (arm_gdbarch_init): Set
4549 tdep->have_wmmx_registers according target descriptions.
4550 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
4553 2015-05-28 Yao Qi <yao.qi@linaro.org>
4555 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
4556 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
4557 instead of arm_linux_vfp_register_count.
4558 (store_vfp_regs): Likewise.
4559 (arm_linux_fetch_inferior_registers): Likewise.
4560 (arm_linux_store_inferior_registers): Likewise.
4561 (arm_linux_read_description): Don't set
4562 arm_linux_vfp_register_count.
4563 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
4565 * arm-tdep.c (arm_gdbarch_init): Add assert on
4567 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
4568 field to vfp_register_count. All users updated.
4570 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
4572 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
4573 ELFOSABI_GNU binaries.
4575 2015-05-27 Doug Evans <dje@google.com>
4577 * dwarf2read.c (lnp_state_machine): New typedef.
4578 (lnp_reader_state): New typedef.
4579 (dwarf_record_line_1): Renamed from dwarf_record_line.
4580 All callers updated.
4581 (dwarf_record_line): New function.
4582 (init_lnp_state_machine): New function.
4583 (check_line_address): Replace p_record_line parameter with state.
4584 All callers updated.
4585 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
4586 Update to record state in lnp_state_machine.
4588 2015-05-27 Doug Evans <dje@google.com>
4590 * dwarf2read.c (record_line_ftype): New typedef.
4591 (check_line_address): New function.
4592 (dwarf_decode_lines_1): Call it.
4594 2015-05-27 Doug Evans <dje@google.com>
4596 * NEWS: Mention "set debug dwarf-line".
4597 * dwarf2read.c (dwarf_line_debug): New static global.
4598 (add_include_dir): Add debug dwarf-line support.
4599 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
4600 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
4602 2015-05-27 Doug Evans <dje@google.com>
4604 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
4605 All callers updated.
4606 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
4607 * cp-support.h (cp_lookup_nested_symbol): Update.
4609 2015-05-27 Doug Evans <dje@google.com>
4612 * block.c (block_find_symbol): New function.
4613 (block_find_non_opaque_type): Ditto.
4614 (block_find_non_opaque_type_preferred): Ditto.
4615 * block.h (block_symbol_matcher_ftype): New typedef.
4616 (block_find_symbol): Declare.
4617 (block_find_non_opaque_type): Ditto.
4618 (block_find_non_opaque_type_preferred): Ditto.
4619 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
4620 * psymtab.c (psym_lookup_symbol): Ditto.
4621 * symtab.c (basic_lookup_transparent_type_1): New function.
4622 (basic_lookup_transparent_type): Call it.
4624 2015-05-27 Yao Qi <yao.qi@linaro.org>
4626 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
4627 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
4629 2015-05-27 Yao Qi <yao.qi@linaro.org>
4631 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
4633 (aarch64_record_load_store): Likewise.
4635 2015-05-26 Doug Evans <dje@google.com>
4637 PR c++/18141, c++/18417.
4638 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
4641 2015-05-26 Doug Evans <dje@google.com>
4643 * NEWS: Add entries for command renamings.
4644 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
4646 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
4647 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
4649 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
4650 All callers updated. Fix spelling of DWARF in help text.
4651 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
4653 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
4655 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
4656 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
4657 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
4659 (show_dwarf_always_disassemble): Renamed from
4660 show_dwarf2_always_disassemble. All callers updated.
4661 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
4662 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
4663 "set/show dwarf max-cache-age". Rename
4664 "set/show dwarf2 always-disassemble" to
4665 "set/show dwarf always-disassemble". Rename
4666 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
4667 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
4669 2015-05-26 Doug Evans <dje@google.com>
4672 * python/py-lazy-string.c (stpy_convert_to_value): Use
4673 gdbpy_gdb_memory_error not PyExc_MemoryError.
4674 (gdbpy_create_lazy_string_object): Ditto.
4676 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
4678 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
4680 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
4682 * tui/tui-regs.c (tui_reg_prev_command): New function.
4683 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
4684 * reggroups.c (reggroup_prev): New function.
4685 * reggroups.h (reggroup_prev): Add declaration. Update comment.
4687 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
4688 Yao Qi <yao.qi@linaro.org>
4690 * aarch64-linux-tdep.c: Include linux-record.h and
4692 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
4693 (aarch64_syscall): New enum.
4694 (aarch64_canonicalize_syscall): New function.
4695 (aarch64_all_but_pc_registers_record): New function.
4696 (aarch64_linux_syscall_record): New function.
4697 (aarch64_linux_init_abi): Install AArch64 process record
4698 handler. Update to handle syscall recording.
4699 * aarch64-tdep.c: Include record.h and record-full.h.
4700 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
4701 (struct aarch64_mem_r): Define.
4702 (aarch64_record_result): New enum.
4703 (struct insn_decode_record): Define.
4704 (insn_decode_record): New typedef.
4705 (aarch64_record_data_proc_reg): New function.
4706 (aarch64_record_data_proc_imm): New function.
4707 (aarch64_record_branch_except_sys): New function.
4708 (aarch64_record_load_store): New function.
4709 (aarch64_record_data_proc_simd_fp): New function.
4710 (aarch64_record_asimd_load_store): New function.
4711 (aarch64_record_decode_insn_handler): New function.
4712 (deallocate_reg_mem): New function.
4713 (aarch64_process_record): New function.
4714 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
4716 (aarch64_process_record): New extern declaration.
4717 * configure.tgt: Add linux-record.o to gdb_target_obs.
4718 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
4720 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
4722 * NEWS: Add a note on process record-replay support on aarch64*-linux*
4725 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
4727 * amd64-tdep.c: Replace in_function_epilogue_p with
4728 stack_frame_destroyed_p throughout.
4729 * arch-utils.c: Ditto.
4730 * arch-utils.h: Ditto.
4731 * arm-tdep.c: Ditto.
4732 * breakpoint.c: Ditto.
4733 * gdbarch.sh: Ditto.
4734 * hppa-tdep.c: Ditto.
4735 * i386-tdep.c: Ditto.
4736 * mips-tdep.c: Ditto.
4737 * nios2-tdep.c: Ditto.
4738 * rs6000-tdep.c: Ditto.
4739 * s390-linux-tdep.c: Ditto.
4740 * score-tdep.c: Ditto.
4742 * sparc-tdep.c: Ditto.
4743 * sparc-tdep.h: Ditto.
4744 * sparc64-tdep.c: Ditto.
4745 * spu-tdep.c: Ditto.
4746 * tic6x-tdep.c: Ditto.
4747 * tilegx-tdep.c: Ditto.
4748 * xstormy16-tdep.c: Ditto.
4749 * gdbarch.c, gdbarch.h: Re-generated.
4751 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
4753 * NEWS: Mention 'tui enable' and 'tui disable'.
4754 * tui/tui.c (tui_enable_command): New function.
4755 (tui_disable_command): New function.
4756 (_initialize_tui): New function.
4758 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4760 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
4762 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4764 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
4767 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4769 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
4771 (tui_set_layout_for_display_command): ...here, before calling
4772 tui_set_layout. Only set the layout if gdb has not already
4773 entered the TUI_FAILURE state.
4775 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4777 * tui/tui-layout.c (layout_completer): New function.
4778 (_initialize_tui_layout): Set completer on layout command.
4780 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4782 * tui/tui-layout.c (tui_set_layout): Remove
4783 tui_register_display_type parameter. Remove all checking of this
4784 parameter, and reindent function. Update header comment.
4785 (tui_set_layout_for_display_command): Rename to...
4786 (tui_set_layout_by_name): ...this, and don't check for different
4787 register class types, don't pass a tui_register_display_type to
4788 tui_set_layout. Update header comment.
4789 (layout_names): Remove register set specific names.
4790 * tui/tui-layout.h (tui_set_layout): Remove
4791 tui_register_display_type parameter.
4792 * tui/tui.c (tui_rl_change_windows): Don't pass a
4793 tui_register_display_type to tui_set_layout.
4794 (tui_rl_delete_other_windows): Likewise.
4795 (tui_enable): Likewise.
4796 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
4797 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
4798 (TUI_GENERAL_REGS_NAME): Remove.
4799 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
4800 (TUI_SPECIAL_REGS_NAME): Remove.
4801 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
4802 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
4803 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
4804 (enum tui_register_display_type): Remove.
4805 (struct tui_layout_def): Remove regs_display_type and
4806 float_regs_display_type fields.
4807 (struct tui_data_info): Remove regs_display_type field.
4808 (tui_layout_command): Use new name for
4809 tui_set_layout_for_display_command.
4810 * tui/tui-data.c (layout_def): Don't initialise removed fields.
4811 (tui_clear_win_detail): Don't initialise removed fields of
4813 * tui/tui-regs.c (tui_show_registers): Use new name for
4814 tui_set_layout_for_display_command.
4815 * tui/tui.h (tui_set_layout_for_display_command): Rename
4817 (tui_set_layout_by_name): ...this.
4818 * printcmd.c (display_command): Remove tui related layout call,
4821 2015-05-20 Joel Brobecker <brobecker@adacore.com>
4823 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
4824 (handle_inferior_event): New function.
4826 2015-05-20 Joel Brobecker <brobecker@adacore.com>
4828 * ada-lang.c (to_fixed_array_type): Rename local variable
4829 typename into type_name.
4831 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
4833 Fix ASAN crash for gdb.compile/compile.exp.
4834 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
4836 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
4838 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
4839 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
4840 * compile/compile-object-load.c (setup_sections, compile_object_load):
4842 * compile/compile.c (compile_to_object): Likewise.
4844 2015-05-16 Doug Evans <xdje42@gmail.com>
4846 * NEWS: Mention support for unbuffered Guile memory ports.
4847 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
4848 (ioscm_lseek_address): Improve overflow calculation.
4849 (gdbscm_memory_port_fill_input): Add assert.
4850 (gdbscm_memory_port_write): Handle unbuffered ports.
4851 Handle large writes identical to Guile's fport_write.
4852 (gdbscm_memory_port_seek): Fix seeking past end check.
4853 (gdbscm_memory_port_close): Handle closing unbuffered port.
4854 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
4855 (ioscm_init_memory_port): Handle unbuffered ports.
4856 (ioscm_reinit_memory_port): Ditto.
4857 (ioscm_init_memory_port): Update size calculation.
4858 (gdbscm_open_memory): Support zero sized ports.
4860 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4862 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
4863 variable compiler warnings.
4865 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4867 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
4869 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4870 Phil Muldoon <pmuldoon@redhat.com>
4872 * NEWS (Changes since GDB 7.9): Add compile print.
4873 * compile/compile-c-support.c (add_code_header, add_code_footer)
4874 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
4875 COMPILE_I_PRINT_VALUE_SCOPE.
4876 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
4877 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
4879 * compile/compile-object-load.c: Include block.h.
4880 (get_out_value_type): New function.
4881 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
4882 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
4884 * compile/compile-object-load.h (struct compile_module): Add fields
4885 out_value_addr and out_value_type.
4886 * compile/compile-object-run.c: Include valprint.h and compile.h.
4887 (struct do_module_cleanup): Add fields out_value_addr and
4889 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
4890 COMPILE_I_PRINT_VALUE_SCOPE.
4891 (compile_object_run): Propagate out_value_addr and out_value_type.
4892 Pass OUT_VALUE_ADDR.
4893 * compile/compile.c: Include valprint.h.
4894 (compile_print_value, compile_print_command): New functions.
4895 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
4896 (_initialize_compile): Update compile code help text. Install
4897 compile_print_command.
4898 * compile/compile.h (compile_print_value): New prototype.
4899 * defs.h (enum compile_i_scope_types): Add
4900 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
4902 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4904 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
4905 Rely on its parameter count.
4906 (compile_object_load): Replace lookup_minimal_symbol_text by
4907 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
4909 * compile/compile-object-load.h (struct compile_module): Replace
4910 func_addr by func_sym.
4911 * compile/compile-object-run.c: Include block.h.
4912 (compile_object_run): Reset module variable after it is freed. Use
4913 FUNC_SYM instead of FUNC_ADDR. Rely on it.
4915 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4917 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
4918 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
4919 (c_compute_program): Call generate_register_struct after typedefs.
4920 * compile/compile-loc2c.c (push, pushf_register_address)
4921 (pushf_register): Cast to GCC_UINTPTR.
4922 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
4923 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
4924 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
4925 * compile/compile.c (_initialize_compile): Enable warnings for
4928 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4930 * cli/cli-script.c (execute_control_command): Update
4931 eval_compile_command caller.
4932 * compile/compile-object-load.c (compile_object_load): Add parameters
4933 scope and scope_data. Set them.
4934 * compile/compile-object-load.h (struct compile_module): Add fields
4935 scope and scope_data.
4936 (compile_object_load): Add parameters scope and scope_data.
4937 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
4938 scope and scope_data.
4939 (compile_object_run): Propagate the fields scope and scope_data.
4940 * compile/compile.c (compile_file_command, compile_code_command):
4941 Update eval_compile_command callers.
4942 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
4943 * compile/compile.h (eval_compile_command): Add parameter scope_data.
4944 * defs.h (struct command_line): Add field scope_data.
4946 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4948 * printcmd.c (struct format_data): Move it to valprint.h.
4949 (print_command_parse_format, print_value): New functions from ...
4950 (print_command_1): ... here. Call them.
4951 * valprint.h (struct format_data): Move it here from printcmd.c.
4952 (print_command_parse_format, print_value): New declarations.
4954 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4956 * compile/compile-object-load.c (compile_object_load): Add
4957 COMPILE_DEBUG message.
4959 2015-05-15 Jerome Guitton <guitton@adacore.com>
4961 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
4962 index to get element instead of enum value.
4963 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
4964 of index to compute length, but enum values to compute bounds.
4965 (ada_array_length): Use enum position of index instead of enum value.
4966 (pos_atr): Move position computation to...
4967 (ada_evaluate_subexp): Use enum values to compute bounds.
4968 * gdbtypes.c (discrete_position): ...this new function.
4969 * gdbtypes.h (discrete_position): New function declaration.
4970 * valprint.c (val_print_array_elements): Call discrete_position
4971 to handle array indexed by non-contiguous enumeration types.
4973 2015-05-15 Jerome Guitton <guitton@adacore.com>
4975 * ada-lang.c (find_parallel_type_by_descriptive_type):
4976 Go through typedefs during lookup.
4977 (to_fixed_array_type): Add support for non-bit packed arrays
4978 as variable-length fields.
4980 2015-05-15 Pedro Alves <palves@redhat.com>
4981 Simon Marchi <simon.marchi@ericsson.com>
4983 * event-loop.c (gdb_notifier) <next_file_handler,
4984 next_poll_fds_index>: New fields.
4985 (get_next_file_handler_to_handle_and_advance): New function.
4986 (delete_file_handler): If deleting the next file handler to
4987 handle, advance to the next file handler.
4988 (gdb_wait_for_event): Bail early if no event fired. Poll file
4989 handlers in round-robin fashion.
4991 2015-05-15 Pedro Alves <palves@redhat.com>
4993 * linux-tdep.c (linux_find_memory_regions_full): Rename local
4994 'private' to 'priv'.
4996 2015-05-15 Pedro Alves <palves@redhat.com>
4998 * nat/linux-nat.h: Include "target/waitstatus.h".
5000 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
5002 * python/py-unwind.c (struct reg_info): Move out of ...
5003 (struct cached_frame_info): ... this scope.
5004 (pending_frame_object_type, unwind_info_object_type): Make extern.
5006 2015-05-15 Joel Brobecker <brobecker@adacore.com>
5008 * ada-lang.c (ada_value_primitive_packed_val): Make sure
5009 accumSize is never negative.
5011 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
5013 * tui/tui-command.c: Remove include of <ctype.h>.
5014 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
5016 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
5018 * dwarf2read.c (die_needs_namespace): Return 1 for
5019 DW_TAG_inlined_subroutine.
5021 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5023 * regcache.c (regcache_cpy_no_passthrough): New declaration.
5024 (regcache_cpy_no_passthrough): Make it static, add function comment.
5025 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
5026 (regcache_cpy_no_passthrough): Remove declaration.
5028 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5030 * gdbthread.h (struct thread_control_state): Update comment for
5032 * infcall.c (run_inferior_call): Update comment about
5034 * infcmd.c (get_return_value): Update comment about stop_registers.
5035 (finish_forward): Update comment about proceed_to_finish.
5036 * infrun.c (stop_registers): Remove.
5037 (clear_proceed_status, normal_stop): Remove stop_registers handling.
5038 * infrun.h (stop_registers): Remove.
5040 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5042 * infcall.c (struct dummy_frame_context_saver)
5043 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
5044 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
5045 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
5047 (call_function_by_hand_dummy): Move discard_cleanups of
5048 inf_status_cleanup before dummy_frame_push. Call
5049 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
5050 Use dummy_frame_context_saver_get_regs instead of stop_registers.
5051 * infcall.h (struct dummy_frame_context_saver)
5052 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
5053 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
5055 * infcmd.c: Include infcall.h.
5056 (get_return_value): Add parameter ctx_saver, use it instead of
5058 (print_return_value): Add parameter ctx_saver, pass it.
5059 (struct finish_command_continuation_args): Add field ctx_saver.
5060 (finish_command_continuation): Update print_return_value caller.
5061 (finish_command_continuation_free_arg): Free also ctx_saver.
5062 (finish_forward): Call dummy_frame_context_saver_setup.
5063 * inferior.h (struct dummy_frame_context_saver): New declaration.
5064 (get_return_value): Add parameter ctx_saver.
5065 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
5066 get_return_value caller.
5068 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5070 * dummy-frame.c (struct dummy_frame_dtor_list): New.
5071 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
5072 (remove_dummy_frame): Process dtor_list.
5073 (pop_dummy_frame): Process dtor_list.
5074 (register_dummy_frame_dtor): Maintain dtor_list.
5075 (find_dummy_frame_dtor): Handle dtor_list.
5076 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
5079 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5081 * compile/compile-object-run.c (do_module_cleanup): Add parameter
5083 (compile_object_run): Update do_module_cleanup caller.
5084 * dummy-frame.c: Include infcall.h.
5085 (struct dummy_frame): Update dtor comment.
5086 (remove_dummy_frame): Call dtor.
5087 (pop_dummy_frame): Update dtor caller.
5088 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
5091 2015-05-13 Joel Brobecker <brobecker@adacore.com>
5095 2015-05-13 Joel Brobecker <brobecker@adacore.com>
5097 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
5098 Xmethods now being able to specify a result type to that new
5101 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
5103 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
5104 first before resizing the window.
5105 * tui/tui.c (tui_enable): Likewise.
5107 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5109 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
5110 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
5111 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
5112 dummy_dtor parameter.
5113 * infcall.h: Include dummy-frame.h.
5114 (call_function_by_hand_dummy_dtor_ftype): Remove.
5115 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
5118 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
5121 * top.c (history_size_setshow_var): Change type to signed.
5122 Initialize to -2. Update documentation.
5123 (set_readline_history_size): Define.
5124 (set_history_size_command): Use it. Remove logic for handling
5126 (init_history): Use set_readline_history_size(). Test for a
5127 value of -2 instead of 0 when determining whether to set a
5128 default history size.
5129 (init_main): Decode the argument of the "size" command as a
5130 zuinteger_unlimited.
5132 2015-05-12 Doug Evans <dje@google.com>
5134 * dwarf2read.c (struct file_entry): Tweak comments.
5135 (get_debug_line_section): Tweak comments.
5137 2015-05-12 Don Breazeal <donb@codesourcery.com>
5139 * NEWS: Announce fork support in the RSP and support
5140 for fork debugging in extended mode.
5142 2015-05-12 Don Breazeal <donb@codesourcery.com>
5144 * remote.c (remote_insert_fork_catchpoint): New function.
5145 (remote_remove_fork_catchpoint): New function.
5146 (remote_insert_vfork_catchpoint): New function.
5147 (remote_remove_vfork_catchpoint): New function.
5148 (pending_fork_parent_callback): New function.
5149 (remove_new_fork_child): New function.
5150 (remote_update_thread_list): Call remote_notif_get_pending_events
5151 and remove_new_fork_child.
5152 (extended_remote_kill): Kill fork child when killing the
5153 parent before follow_fork completes.
5154 (init_extended_remote_ops): Initialize target vector with
5155 new fork catchpoint functions.
5157 2015-05-12 Don Breazeal <donb@codesourcery.com>
5159 * remote.c (remove_vfork_event_p): New function.
5160 (remote_follow_fork): Add vfork event type to event checking.
5161 (remote_parse_stop_reply): New stop reasons "vfork" and
5162 "vforkdone" for RSP 'T' Stop Reply Packet.
5164 2015-05-12 Don Breazeal <donb@codesourcery.com>
5166 * linux-nat.c (linux_nat_ptrace_options): New function.
5167 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
5168 Call linux_nat_ptrace_options and use different argument to
5169 linux_enable_event_reporting.
5170 (_initialize_linux_nat): Delete call to
5171 linux_ptrace_set_additional_flags.
5172 * nat/linux-ptrace.c (current_ptrace_options): Rename to
5173 supported_ptrace_options.
5174 (additional_flags): Delete variable.
5175 (linux_check_ptrace_features): Use supported_ptrace_options.
5176 (linux_test_for_tracesysgood, linux_test_for_tracefork):
5177 Likewise, and remove additional_flags check.
5178 (linux_enable_event_reporting): Change 'attached' argument to
5179 'options'. Use supported_ptrace_options.
5180 (ptrace_supports_feature): Change comment. Use
5181 supported_ptrace_options.
5182 (linux_ptrace_set_additional_flags): Delete function.
5183 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
5184 Delete function prototype.
5185 * remote.c (remote_fork_event_p): New function.
5186 (remote_detach_pid): New function.
5187 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
5188 if doing detach-on-fork.
5189 (remote_follow_fork): New function.
5190 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
5191 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
5192 (init_extended_remote_ops): Initialize to_follow_fork.
5194 2015-05-12 Don Breazeal <donb@codesourcery.com>
5196 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
5197 from static to extern.
5198 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
5199 * remote.c (anonymous enum): <PACKET_fork_event_feature,
5200 * PACKET_vfork_event_feature>: New enumeration constants.
5201 (remote_protocol_features): Add table entries for new packets.
5202 (remote_query_supported): Add new feature queries to qSupported
5205 2015-05-12 Gary Benson <gbenson@redhat.com>
5207 * remote.c (remote_add_inferior): Call exec_file_locate_attach
5208 for fake PIDs as well as real ones.
5209 (remote_pid_to_exec_file): Send empty annex if PID is fake.
5211 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
5213 * NEWS (Python Scripting): Mention the new gdb.Value methods.
5214 * python/py-value.c (valpy_reference_value): New function.
5215 (valpy_const_value): Likewise.
5216 (value_object_methods): Add new methods.
5217 * value.c (make_cv_value): New function.
5218 * value.h (make_cv_value): Declare.
5220 2015-05-08 Yao Qi <yao@codesourcery.com>
5221 Sandra Loosemore <sandra@codesourcery.com>
5223 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
5224 to 'lh->include_dirs' before accessing to it.
5225 (psymtab_include_file_name): Likewise.
5226 (dwarf_decode_lines_1): Likewise.
5227 (dwarf_decode_lines): Likewise.
5228 (file_file_name): Likewise.
5230 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
5232 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
5233 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
5234 (nios2_linux_rt_sigreturn_init): Adjust base address of
5237 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
5239 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
5240 "trap 31" as the breakpoint instruction on all targets.
5242 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
5244 * infcmd.c (print_return_value): Remove unused declaration.
5246 2015-05-08 Joel Brobecker <brobecker@adacore.com>
5248 * dwarf2read.c (attr_to_dynamic_prop)
5249 <DW_AT_data_member_location>: Use read_type_die isntead of
5252 2015-05-08 Joel Brobecker <brobecker@adacore.com>
5254 * ada-lang.c (ada_convert_actual): Add handling of formals
5255 passed inside an aligner type.
5257 2015-05-08 Joel Brobecker <brobecker@adacore.com>
5259 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
5261 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
5264 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
5265 Print xmethod matcher status.
5267 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
5269 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
5270 register in the regcache when treating the PSWM register, and vice
5273 2015-05-07 Gary Benson <gbenson@redhat.com>
5275 * linux-thread-db.c (struct thread_db_info)
5276 <td_ta_map_id2thr_p>: Remove field.
5277 (try_thread_db_load_1): Remove initialization for the above.
5279 2015-05-07 Gary Benson <gbenson@redhat.com>
5281 * linux-thread-db.c (struct thread_db_info)
5282 <td_thr_validate_p>: Remove field.
5283 (try_thread_db_load_1): Remove initialization for the above.
5285 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
5287 * compile/compile-object-load.c (compile_object_load): Support
5290 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
5292 * compile/compile.c (compile_to_object): Make the cmd_string parameter
5293 const. Use new variables for the const compatibility.
5294 (eval_compile_command): Make the cmd_string parameter const.
5295 * compile/compile.h (eval_compile_command): Make the cmd_string
5298 2015-05-06 Joel Brobecker <brobecker@adacore.com>
5300 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
5302 * top.c (deprecated_init_ui_hook): Delete.
5303 (gdb_init): Remove handling of deprecated_init_ui_hook.
5304 * interps.c (clear_interpreter_hooks): Remove handling of
5305 deprecated_init_ui_hook.
5306 * main.c (captured_main): Update comment.
5308 2015-05-06 Joel Brobecker <brobecker@adacore.com>
5310 * solib.c (_initialize_solib): Add "info dll" alias creation.
5311 * windows-nat.c (set_windows_aliases): Delete.
5312 (_initialize_windows_nat): Remove deprecated_init_ui_hook
5314 * NEWS: Add news entry about "info dll" now being available
5317 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5319 * ada-lang.c (value_assign_to_component): Reformat and improve
5320 documentation. Remove all trailing spaces.
5322 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5324 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
5325 Stop counting inlined frames as soon as an out-of-line function
5328 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
5330 * dwarf2read.c (inherit_abstract_dies): Skip
5331 DW_TAG_GNU_call_site dies while inheriting children of an
5332 abstract DIE into a scope.
5333 (read_lexical_block_scope): Inherit abstract DIE's for
5336 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5338 * ada-valprint.c (val_print_packed_array_elements): Delete
5339 variable "len". Add a type-length check when comparing two
5340 consecutive elements of the array. Use the element's actual
5341 length in call to value_contents_eq.
5342 * ada-lang.c (ada_value_primitive_packed_val): Always return
5343 a value whose type has been resolved.
5345 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5347 * ada-lang.c (ada_value_primitive_packed_val): Recompute
5348 BIT_SIZE and LEN if the size of the resolved type is smaller
5349 than BIT_SIZE * HOST_CHAR_BIT.
5351 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5353 * ada-lang.c (ada_value_primitive_packed_val): Use a more
5354 correct address in call to value_at. Adjust call to
5355 value_address accordingly.
5357 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5359 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
5362 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5364 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
5365 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
5367 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
5368 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
5369 (resolve_dynamic_type_internal): Set pinfo.valaddr.
5370 Add handling of addr_stack->valaddr.
5371 (resolve_dynamic_type): Add "valaddr" parameter.
5372 Set pinfo.valaddr field.
5373 * ada-lang.c (ada_discrete_type_high_bound): Update call to
5374 resolve_dynamic_type.
5375 (ada_discrete_type_low_bound): Likewise.
5376 * findvar.c (default_read_var_value): Likewise.
5377 * value.c (value_from_contents_and_address): Likewise.
5379 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5381 * gdbtypes.c (resolve_dynamic_array): Use
5382 create_array_type_with_stride instead of create_array_type.
5384 2015-04-30 DJ Delorie <dj@redhat.com>
5386 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
5389 2015-04-29 Doug Evans <dje@google.com>
5392 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
5393 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
5394 EVAL_AVOID_SIDE_EFFECTS for xmethods.
5395 * extension-priv.h (struct extension_language_ops)
5396 <get_xmethod_result_type>: New member.
5397 * extension.c (get_xmethod_result_type): New function.
5398 * extension.h (get_xmethod_result_type): Declare.
5399 * python/py-xmethods.c (get_result_type_method_name): New static
5401 (py_get_result_type_method_name): Ditto.
5402 (gdbpy_get_xmethod_result_type): New function.
5403 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
5404 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
5405 * python/python.c (python_extension_ops): Add
5406 gdbpy_get_xmethod_result_type.
5407 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
5408 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
5410 (value_x_unop): Ditto.
5411 * value.c (result_type_of_xmethod): New function.
5412 * value.h (result_type_of_xmethod): Declare.
5414 2015-04-29 Gary Benson <gbenson@redhat.com>
5416 * solib.c (solib_find_1): Allow fd argument to be NULL.
5417 (exec_file_find): Update comment.
5418 (solib_find): Likewise.
5419 * exec.c (exec_file_locate_attach): Use NULL as fd
5420 argument to exec_file_find to avoid having to close
5422 * infrun.c (follow_exec): Likewise.
5424 2015-04-28 Doug Evans <dje@google.com>
5427 * python/lib/gdb/printing.py (register_pretty_printer): Handle
5428 name or __name__ attributes. Handle gdb module as first argument.
5430 2015-04-28 Doug Evans <dje@google.com>
5433 * python/py-prettyprint.c (print_children): Verify result of children
5434 iterator. Provide better error message.
5435 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
5436 * python/python.c (gdbpy_print_python_errors_p): New function.
5438 2015-04-28 Doug Evans <dje@google.com>
5440 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
5442 2015-04-28 Sasha Smundak <asmundak@google.com>
5444 * NEWS: Mention gdb.Type.optimized_out method.
5445 * python/py-type.c (typy_optimized_out): New function.
5447 2015-04-28 John Baldwin <jhb@FreeBSD.org>
5449 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
5451 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5453 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
5454 (initialize_utils): Move call of init_page_info() to ...
5455 * top.c (gdb_init): ... here.
5457 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5459 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
5460 (tui_sigwinch_handler): Still update our idea of
5461 the terminal's width and height even when TUI is not active.
5463 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5465 * utils.h (set_screen_width_and_height): Declare.
5466 * utils.c (set_screen_width_and_height): Define.
5467 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
5469 2015-04-28 Gary Benson <gbenson@redhat.com>
5471 * infrun.c (solist.h): New include.
5472 (follow_exec): Use exec_file_find to prefix execd_pathname
5475 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5477 * tui/tui-source.c (tui_set_source_content): Avoid calling
5478 strcpy() when offset is 0.
5480 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5483 * tui/tui-data.c (tui_free_window): Don't free the locator
5484 window when passed an SRC_WIN or a DISASSEM_WIN.
5486 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5488 * tui/tui-data.h (struct tui_win_element): Forward-declare.
5489 (tui_win_content): Move declaration.
5490 (struct tui_gen_win_info): Give 'content' field the
5491 type tui_win_content.
5492 * tui/tui-data.c (init_content_element): Remove redundant and
5494 (tui_add_content_elements): Remove erroneous cast.
5495 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
5497 (tui_get_begin_asm_address): Likewise.
5498 * tui/tui-regs.c (tui_show_registers): Likewise.
5499 (tui_show_register_group): Likewise.
5500 (tui_display_registers_from): Likewise.
5501 (tui_check_register_values): Likewise.
5502 * tui/tui-source.c (tui_set_source_content): Likewise.
5503 (tui_set_source_content_nil): Likewise.
5504 (tui_source_is_displayed): Likewise.
5505 * tui/tui-stack.c (tui_show_locator_content): Likewise.
5506 (tui_set_locator_fullname): Likewise.
5507 (tui_set_locator_info): Likewise.
5508 (tui_show_frame_info): Likewise.
5509 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
5510 (tui_show_source_line): Likewise.
5511 (tui_horizontal_source_scroll): Likewise.
5512 (tui_update_breakpoint_info): Likewise.
5513 (tui_set_exec_info_content): Likewise.
5514 (tui_show_exec_info_content): Likewise.
5515 (tui_alloc_source_buffer): Likewise.
5516 (tui_line_is_displayed): Likewise.
5517 (tui_addr_is_displayed): Likewise.
5519 2015-04-27 John Baldwin <jhb@FreeBSD.org>
5521 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
5522 event if PL_FLAG_EXEC is set.
5523 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
5524 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
5525 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
5526 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
5527 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
5529 2015-04-27 John Baldwin <jhb@FreeBSD.org>
5531 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
5532 [TDP_RFPPWAIT] New variable fbsd_pending_children.
5533 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
5534 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
5535 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
5536 [PT_LWPINFO] (fbsd_wait): New function.
5537 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
5538 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
5539 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
5540 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
5541 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
5542 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
5543 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
5544 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
5545 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
5547 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
5548 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
5549 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
5550 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
5551 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
5552 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
5553 Set "to_post_attach" to "fbsd_post_attach".
5555 2015-04-27 John Baldwin <jhb@FreeBSD.org>
5557 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
5558 (fbsd_find_memory_regions): Mark static.
5559 (fbsd_nat_add_target): New function.
5560 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
5561 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
5562 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
5563 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
5564 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
5565 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
5567 2015-04-27 Gary Benson <gbenson@redhat.com>
5569 * objfiles.c (allocate_objfile): Do not attempt to expand name
5570 if name is a "target:" filename.
5571 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
5572 to load auto-load scripts for objfiles with "target:" filenames.
5574 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5576 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
5577 (enum s390_vector_abi_kind): New enum.
5578 (struct gdbarch_tdep)<vector_abi>: New field.
5579 (s390_effective_inner_type): Add parameter min_size. Stop
5580 unwrapping if the inner type is smaller than min_size.
5581 (s390_function_arg_float): Adjust call to
5582 s390_effective_inner_type.
5583 (s390_function_arg_vector): New function.
5584 (s390_function_arg_integer): Adjust comment.
5585 (struct s390_arg_state)<vr>: New field.
5586 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
5587 arguments according to vector ABI when appropriate.
5588 (s390_push_dummy_call): Initialize the argument state's field
5589 'vr'. Adjust calls to s390_handle_arg.
5590 (s390_register_return_value): Handle vector return values.
5591 (s390_return_value): Apply the "register" return value convention
5592 to a vector when appropriate.
5593 (s390_gdbarch_init): Initialize tdep->vector_abi.
5594 * NEWS: Announce S390 vector ABI support.
5596 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5598 * s390-linux-tdep.c (s390_return_value_convention): Remove
5599 function. Inline its logic...
5600 (s390_return_value): ...here. Instead, move the handling of the
5601 "register" return value convention...
5602 (s390_register_return_value): ...here. New function.
5604 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5607 (is_float_singleton): Remove function. Move the "singleton" part
5609 (s390_effective_inner_type): ...here. New function.
5610 (is_float_like): Remove function. Inline its logic...
5611 (s390_function_arg_float): ...here.
5612 (is_pointer_like, is_integer_like, is_struct_like): Remove
5613 functions. Inline their logic...
5614 (s390_function_arg_integer): ...here.
5615 (s390_function_arg_pass_by_reference): Remove function.
5616 (extend_simple_arg): Remove function.
5617 (alignment_of): Remove function.
5618 (struct s390_arg_state): New structure.
5619 (s390_handle_arg): New function.
5620 (s390_push_dummy_call): Move parameter placement logic to the new
5621 function s390_handle_arg. Call it for calculating the stack area
5622 sizes first, and again for actually writing the parameters.
5624 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5626 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
5627 false if the argument is zero.
5629 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
5631 * ada-lang.c (template_to_static_fixed_type): Return input type
5632 when it is already fixed. Cache the input type itself when not
5633 creating a static fixed copy. Make it explicit that we never
5634 molestate the input type.
5635 * gdbtypes.c (resolve_dynamic_struct): Reset the
5636 TYPE_TARGET_TYPE field for resolved copies.
5638 2015-04-27 Joel Brobecker <brobecker@adacore.com>
5640 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
5641 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
5642 (template_to_static_fixed_type): Call ada_check_typedef only
5645 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
5647 * cli/cli-dump.c (srec_dump_command): Add internationalization
5649 (ihex_dump_command): Likewise.
5650 (tekhex_dump_command): Likewise.
5651 (binary_dump_command): Likewise.
5652 (binary_append_command): Likewise.
5654 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
5656 * cli/cli-dump.c (verilog_cmdlist): New variable.
5657 (dump_verilog_memory): New function.
5658 (dump_verilog_value): New function.
5659 (verilog_dump_command): New function.
5660 (_initialize_cli_dump): Add new commands to support verilog dump
5662 * NEWS: Add entry for "dump verilog".
5664 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
5666 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
5667 descriptive type when there is none.
5669 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
5671 * tui/tui-win.c (tui_async_resize_screen): Call
5672 rl_resize_terminal().
5674 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
5676 * windows-nat.c (handle_output_debug_string): Don't change
5677 current_event.dwThreadId.
5678 (get_windows_debug_event): Use thread_id, rather than relying on
5679 current_event.dwThreadId being changed.
5681 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
5683 * windows-nat.c (windows_continue): Report an error if
5684 ContinueDebugEvent() fails.
5686 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
5688 * windows-nat.c (windows_resume): Fix misspelling in debug output.
5690 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
5692 * windows-nat.c (get_windows_debug_event): Replace retval with
5693 thread_id throughout. Update stale comment.
5695 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
5697 * windows-nat.c (get_windows_debug_event): Don't use ternary
5698 conditional operator.
5700 2015-04-21 Pierre Muller <muller@sourceware.org>
5703 p-exp.y (yylex): Reorganize code to return the matched pattern
5704 for a field of this.
5706 2015-04-21 Gary Benson <gbenson@redhat.com>
5708 * common/fileio.h (fileio_to_host_openflags): New declaration.
5709 * common/fileio.c (fcntl.h): New include.
5710 (fileio_to_host_openflags): New function, factored out from...
5711 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
5714 2015-04-21 Kevin Buettner <kevinb@redhat.com>
5716 * rl78-tdep.c (RL78_SP_ADDR): Define.
5717 (opc_reg_to_gdb_regnum): New static function.
5718 (rl78_analyze_prologue): Recognize instructions forming slightly
5719 more interesting prologues.
5721 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
5724 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
5725 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
5726 TYPE_CODE_REF types so that they are not considered as dynamic
5727 depending on the referenced type.
5728 (resolve_dynamic_type_internal): Likewise.
5730 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
5733 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
5734 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
5735 "top_level" parameter.
5736 (resolve_dynamic_type_internal): Remove the unused "top_level"
5737 parameter. Update call to is_dynamic_type_internal.
5738 (is_dynamic_type): Update call to is_dynamic_type_internal.
5739 (resolve_dynamic_range): Update call to
5740 resolve_dynamic_type_internal.
5741 (resolve_dynamic_union): Likewise.
5742 (resolve_dynamic_struct): Likewise.
5743 (resolve_dynamic_type): Likewise.
5745 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
5747 * breakpoint.c (update_dprintf_command_list): Remove duplicated
5750 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
5752 * reply_mig_hack.awk: Robustify parsing.
5754 * reply_mig_hack.awk: Don't bother to declare an intermediate
5755 function pointer variable.
5757 2015-04-17 Doug Evans <dje@google.com>
5759 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
5760 to "exec_displacement" to avoid confusion with inner use of the name.
5762 2015-04-17 Pedro Alves <palves@redhat.com>
5764 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
5765 if HW point of TYPE isn't supported.
5767 2015-04-17 Yao Qi <yao.qi@linaro.org>
5768 Pedro Alves <palves@redhat.com>
5770 * target.h (target_can_use_hardware_watchpoint): Update comments.
5771 Remove trailing ";".
5773 2015-04-17 Gary Benson <gbenson@redhat.com>
5775 * remote.c (remote_add_inferior): New argument try_open_exec.
5776 If nonzero, attempt to open the inferior's executable file as
5777 the main executable if no main executable is open already.
5778 All callers updated.
5779 * NEWS: Mention that GDB now supports automatic location and
5780 retrieval of executable + files from remote targets.
5782 2015-04-17 Gary Benson <gbenson@redhat.com>
5784 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
5785 * remote.c (PACKET_qXfer_exec_file): Likewise.
5786 (remote_protocol_features): Register the
5787 "qXfer:exec-file:read" feature.
5788 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
5789 (remote_pid_to_exec_file): New function.
5790 (init_remote_ops): Initialize to_pid_to_exec_file.
5791 (_initialize_remote): Register new "set/show remote
5792 pid-to-exec-file-packet" command.
5793 * NEWS: Announce new qXfer:exec-file:read packet.
5795 2015-04-17 Gary Benson <gbenson@redhat.com>
5797 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
5799 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
5800 New function, factored out from...
5801 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
5803 2015-04-17 Gary Benson <gbenson@redhat.com>
5805 * exec.c (solist.h): New include.
5806 (exec_file_locate_attach): Prefix absolute executable
5807 paths with gdb_sysroot if set.
5808 * NEWS: Mention that executable paths may be prepended
5811 2015-04-17 Gary Benson <gbenson@redhat.com>
5813 * solist.h (exec_file_find): New declaration.
5814 * solib.c (solib_find_1): New function, factored out from...
5815 (solib_find): ...here.
5816 (exec_file_find): New function.
5818 2015-04-17 Gary Benson <gbenson@redhat.com>
5820 * gdbcore.h (exec_file_locate_attach): New declaration.
5821 * exec.c (exec_file_locate_attach): New function, factored
5823 * infcmd.c (attach_command_post_wait): ...here.
5825 2015-04-17 Mike Frysinger <vapier@gentoo.org>
5827 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
5829 2015-04-16 Yao Qi <yao.qi@linaro.org>
5831 * infrun.c (maybe_software_singlestep): Declare.
5832 (displaced_step_fixup): Call maybe_software_singlestep.
5834 2015-04-15 Doug Evans <dje@google.com>
5836 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
5838 2015-04-15 Doug Evans <dje@google.com>
5840 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
5842 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
5844 * python/lib/gdb/command/unwinders.py: Add parentheses.
5846 2015-04-15 Yao Qi <yao.qi@linaro.org>
5848 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
5850 2015-04-15 Yao Qi <yao.qi@linaro.org>
5852 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
5854 2015-04-15 Yao Qi <yao.qi@linaro.org>
5856 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
5857 dsc->insn_size instead of 4.
5859 2015-04-14 Gary Benson <gbenson@redhat.com>
5861 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
5862 * minidebug.c (lzma_stat): Likewise.
5863 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
5864 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
5866 2015-04-13 Stan Shebs <stanshebs@google.com>
5868 * MAINTAINERS: Update my email address.
5870 2015-04-13 John Baldwin <jhb@FreeBSD.org>
5872 * amd64-tdep.c (amd64_target_description): New function.
5873 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
5874 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
5875 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
5876 x86 extended save area.
5877 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
5878 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
5879 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
5880 (_initialize_amd64fbsd_nat): Set "to_read_description" to
5881 "amd64fbsd_read_description".
5882 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
5883 (amd64fbsd_supply_xstateregset): New function.
5884 (amd64fbsd_collect_xstateregset): New function.
5885 Add "amd64fbsd_xstateregset".
5886 (amd64fbsd_iterate_over_regset_sections): New function.
5887 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
5888 "I386_FBSD_XSAVE_XCR0_OFFSET".
5889 Add "iterate_over_regset_sections" gdbarch method.
5890 Add "core_read_description" gdbarch method.
5891 * i386-tdep.c (i386_target_description): New function.
5892 * i386-tdep.h: Export i386_target_description and tdesc_i386.
5893 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
5894 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
5895 x86 extended save area.
5896 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
5897 * i386bsd-nat.h: Export i386bsd_xsave_len.
5898 * i386fbsd-nat.c (i386fbsd_read_description): New function.
5899 (_initialize_i386fbsd_nat): Set "to_read_description" to
5900 "i386fbsd_read_description".
5901 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
5902 (i386fbsd_core_read_description): New function.
5903 (i386fbsd_supply_xstateregset): New function.
5904 (i386fbsd_collect_xstateregset): New function.
5905 Add "i386fbsd_xstateregset".
5906 (i386fbsd_iterate_over_regset_sections): New function.
5907 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
5908 "I386_FBSD_XSAVE_XCR0_OFFSET".
5909 Add "iterate_over_regset_sections" gdbarch method.
5910 Add "core_read_description" gdbarch method.
5911 * i386fbsd-tdep.h: New file.
5913 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5915 * NEWS (Changes since GDB 7.9): Add removed -xdb.
5916 * breakpoint.c (command_line_is_silent): Remove xdb_commands
5918 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
5920 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
5922 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
5924 * defs.h (xdb_commands): Remove declaration.
5925 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
5926 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
5927 * infcmd.c (run_no_args_command, go_command): Remove.
5928 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
5929 * infrun.c (xdb_handle_command): Remove.
5930 (_initialize_infrun): Remove xdb_commands for lz and z.
5931 * main.c (xdb_commands): Remove variable.
5932 (captured_main): Remove "xdb" from long_options.
5933 (print_gdb_help): Remove --xdb from help.
5934 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
5935 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
5936 * stack.c (backtrace_full_command, args_plus_locals_info)
5937 (current_frame_command): Remove.
5938 (_initialize_stack): Remove xdb_commands for t, T and l.
5939 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
5940 * thread.c (_initialize_thread): Remove xdb_commands condition.
5941 * tui/tui-layout.c (tui_toggle_layout_command)
5942 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
5943 (_initialize_tui_layout): Remove xdb_commands for td and ts.
5944 * tui/tui-regs.c (tui_scroll_regs_forward_command)
5945 (tui_scroll_regs_backward_command): Remove.
5946 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
5947 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
5948 (_initialize_tui_win): Remove xdb_commands for U and w.
5949 * utils.c (pagination_on_command, pagination_off_command): Remove.
5950 (initialize_utils): Remove xdb_commands for am and sm.
5952 2015-04-10 Pedro Alves <palves@redhat.com>
5954 * infrun.c (displaced_step_fixup): Switch to the event ptid
5955 earlier. If the thread stopped for a watchpoint and the
5956 target/arch has non-continuable watchpoints, cancel the displaced
5958 (resume): Don't start a displaced step if in-line step-over info
5961 2015-04-10 Pedro Alves <palves@redhat.com>
5963 * infrun.c (displaced_step_in_progress): New function.
5964 (do_target_resume): Advise target to report all signals if
5967 2015-04-10 Pedro Alves <palves@redhat.com>
5970 * infrun.c (process_event_stop_test): Don't assume a step-resume
5971 is set if tp->stepped_breakpoint is true.
5973 2015-04-10 Yao Qi <yao.qi@linaro.org>
5975 * arm-tdep.c (install_alu_reg): Update comment.
5976 (thumb_copy_alu_reg): Remove local variable rn. Update
5977 debugging message. Use r2 instead of r1 in the modified
5980 2015-04-10 Pedro Alves <palves@redhat.com>
5983 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
5984 linux_displaced_step_location as gdbarch_displaced_step_location
5986 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
5987 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
5988 * linux-tdep.c (linux_displaced_step_location): New function,
5989 based on ppc_linux_displaced_step_location.
5990 * linux-tdep.h (linux_displaced_step_location): New declaration.
5991 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
5992 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
5994 (ppc_linux_init_abi): Install linux_displaced_step_location as
5995 gdbarch_displaced_step_location hook, even without Cell/B.E..
5996 (_initialize_ppc_linux_tdep): Don't install
5997 ppc_linux_inferior_created as inferior_created observer.
5998 * s390-linux-tdep.c (s390_gdbarch_init): Install
5999 linux_displaced_step_location as gdbarch_displaced_step_location
6002 2015-04-09 Gary Benson <gbenson@redhat.com>
6004 * common/common-remote-fileio.h: Rename to...
6005 * common/fileio.h: ...this. Update all references.
6006 (remote_fileio_to_fio_error): Rename to...
6007 (host_to_fileio_error): ...this.
6008 (remote_fileio_to_be): Rename to...
6009 (host_to_bigendian): ...this. Update all callers.
6010 (remote_fileio_to_fio_uint): Rename to...
6011 (host_to_fileio_uint): ...this. Update all callers.
6012 (remote_fileio_to_fio_time): Rename to...
6013 (host_to_fileio_time): ...this. Update all callers.
6014 (remote_fileio_to_fio_stat): Rename to...
6015 (host_to_fileio_stat): ...this.
6016 Update all references.
6017 * common/common-remote-fileio.c: Rename to...
6018 * common/fileio.c: ...this. Update all references.
6019 (remote_fileio_to_fio_error): Rename to...
6020 (host_to_fileio_error): ...this. Update all callers.
6021 (remote_fileio_mode_to_target): Rename to...
6022 (fileio_mode_pack): ...this. Update all callers.
6023 (remote_fileio_to_fio_mode): Rename to...
6024 (host_to_fileio_mode): ...this. Update all callers.
6025 (remote_fileio_to_fio_ulong): Rename to...
6026 (host_to_fileio_ulong): ...this. Update all callers.
6027 (remote_fileio_to_fio_stat): Rename to...
6028 (host_to_fileio_stat): ...this. Update all callers.
6030 2015-04-09 Andy Wingo <wingo@igalia.com>
6032 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
6033 (frame_functions): Bind gdbscm_frame_read_register to
6034 frame-read-register.
6035 * guile/lib/gdb.scm (frame-read-register): Export.
6037 2015-04-09 Gary Benson <gbenson@redhat.com>
6039 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
6041 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
6042 New function, factored out the named functions below.
6043 * inf-child.c (gdb/fileio.h): Remove include.
6044 (common-remote-fileio.h): New include.
6045 (inf_child_errno_to_fileio_error): Remove function. Update
6046 all callers to use remote_fileio_to_fio_error.
6047 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
6049 2015-04-09 Andy Wingo <wingo@igalia.com>
6051 * MAINTAINERS (Write After Approval): Add Andy Wingo.
6053 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
6055 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
6056 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
6057 * configure: Regenerated.
6059 2015-04-09 Pedro Alves <palves@redhat.com>
6061 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
6062 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
6063 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
6064 * gnulib/import/Makefile.am: Update.
6065 * gnulib/import/Makefile.in: Update.
6066 * gnulib/import/m4/gnulib-cache.m4: Update.
6067 * gnulib/import/m4/gnulib-comp.m4: Update.
6068 * gnulib/import/m4/strtok_r.m4: New file.
6069 * gnulib/import/strtok_r.c: New file.
6071 2015-04-09 Pedro Alves <palves@redhat.com>
6073 * gnulib/update-gnulib.sh (aclocal version check): Filter out
6074 "called too early to check prototype".
6076 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
6079 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
6080 use a caching mechanism. Adjust comments and code to reflect
6081 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
6082 (cmdpy_completer_handle_brkchars): Adjust call to
6083 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
6084 (cmdpy_completer): Likewise.
6086 2015-04-08 Yao Qi <yao.qi@linaro.org>
6088 * spu-tdep.c (spu_gdbarch_init): Don't call
6089 set_gdbarch_cannot_step_breakpoint.
6091 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
6093 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
6095 2015-04-07 Pedro Alves <palves@redhat.com>
6097 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
6098 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
6099 (delete_exited_threads): New declaration.
6100 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
6101 * linux-nat.c (linux_nat_update_thread_list): New function.
6102 (linux_nat_add_target): Install it.
6103 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
6104 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
6105 (delete_exited_threads): New function.
6107 2015-04-07 Pedro Alves <pedro@codesourcery.com>
6109 * infrun.c (resume) <displaced stepping debug output>: Get the
6110 leader thread's regcache, not resume_ptid's.
6112 2015-04-06 Doug Evans <xdje42@gmail.com>
6114 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
6116 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
6117 Include symbol domain in debugging output.
6119 2015-04-06 Pedro Alves <palves@redhat.com>
6120 Bernd Edlinger <bernd.edlinger@hotmail.de>
6122 * configure.ac: Remove the mingw32-specific stub-termcap.o
6123 fallback, and instead fallback to the stub termcap on all hosts.
6124 * configure: Regenerate.
6125 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
6128 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
6130 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
6131 "top_level" parameter.
6132 (resolve_dynamic_type_internal): Remove the unused "top_level"
6133 parameter. Update call to is_dynamic_type_internal.
6134 (is_dynamic_type): Update call to is_dynamic_type_internal.
6135 (resolve_dynamic_range): Update call to
6136 resolve_dynamic_type_internal.
6137 (resolve_dynamic_union): Likewise.
6138 (resolve_dynamic_struct): Likewise.
6139 (resolve_dynamic_type): Likewise.
6141 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
6143 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
6144 TYPE_CODE_REF types so that they are not considered as dynamic
6145 depending on the referenced type.
6146 (resolve_dynamic_type_internal): Likewise.
6148 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
6150 * Makefile.in (top_srcdir): New.
6151 * configure: Regenerated.
6153 2015-04-02 Gary Benson <gbenson@redhat.com>
6155 * NEWS: Announce the new default sysroot of "target:".
6157 2015-04-02 Gary Benson <gbenson@redhat.com>
6159 * main.c (captured_main): Set gdb_sysroot to "target:"
6160 if not otherwise set.
6162 2015-04-02 Gary Benson <gbenson@redhat.com>
6164 * exec.c (exec_file_attach): Support "target:" filenames.
6166 2015-04-02 Gary Benson <gbenson@redhat.com>
6168 * solib.c (solib_find): Strip "target:" prefix from sysroot
6169 if accessing local files.
6171 2015-04-02 Gary Benson <gbenson@redhat.com>
6173 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
6174 checks and error messages.
6176 2015-04-02 Gary Benson <gbenson@redhat.com>
6178 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
6179 (remote_filename_p): Remove declaration.
6180 (remote_bfd_open): Likewise.
6181 * remote.c (remote_bfd_iovec_open): Remove function.
6182 (remote_bfd_iovec_close): Likewise.
6183 (remote_bfd_iovec_pread): Likewise.
6184 (remote_bfd_iovec_stat): Likewise.
6185 (remote_filename_p): Likewise.
6186 (remote_bfd_open): Likewise.
6187 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
6188 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
6189 (gdb_bfd_open_maybe_remote): Remove function.
6190 (symfile_bfd_open): Replace remote filename check with
6191 target filename check.
6192 (reread_symbols): Use gdb_bfd_open.
6193 * build-id.c (gdbcore.h): New include.
6194 (build_id_to_debug_bfd): Use gdb_bfd_open.
6195 * infcmd.c (attach_command_post_wait): Remove remote filename
6197 * solib.c (solib_find): Replace remote-specific handling with
6198 target-specific handling. Update comments where necessary.
6199 (solib_bfd_open): Replace remote-specific handling with
6200 target-specific handling.
6201 (gdb_sysroot_changed): New function.
6202 (_initialize_solib): Call the above when gdb_sysroot changes.
6203 * windows-tdep.c (gdbcore.h): New include.
6204 (windows_xfer_shared_library): Use gdb_bfd_open.
6206 2015-04-02 Gary Benson <gbenson@redhat.com>
6208 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
6209 (is_target_filename): New declaration.
6210 (gdb_bfd_has_target_filename): Likewise.
6211 (gdb_bfd_open): Update documentation comment.
6212 * gdb_bfd.c (target.h): New include.
6213 (gdb/fileio.h): Likewise.
6214 (is_target_filename): New function.
6215 (gdb_bfd_has_target_filename): Likewise.
6216 (fileio_errno_to_host): Likewise.
6217 (gdb_bfd_iovec_fileio_open): Likewise.
6218 (gdb_bfd_iovec_fileio_pread): Likewise.
6219 (gdb_bfd_iovec_fileio_close): Likewise.
6220 (gdb_bfd_iovec_fileio_fstat): Likewise.
6221 (gdb_bfd_open): Use target fileio to access paths prefixed
6222 with "target:" where necessary.
6224 2015-04-02 Gary Benson <gbenson@redhat.com>
6226 * target.h (struct target_ops) <to_filesystem_is_local>:
6228 (target_filesystem_is_local): New macro.
6229 * target-delegates.c: Regenerate.
6230 * remote.c (remote_filesystem_is_local): New function.
6231 (init_remote_ops): Initialize to_filesystem_is_local.
6233 2015-04-02 Gary Benson <gbenson@redhat.com>
6235 * target.h (struct target_ops) <to_fileio_fstat>: New field.
6236 (target_fileio_fstat): New declaration.
6237 * target.c (target_fileio_fstat): New function.
6238 * inf-child.c (inf_child_fileio_fstat): Likewise.
6239 (inf_child_target): Initialize to_fileio_fstat.
6240 * remote.c (init_remote_ops): Likewise.
6242 2015-04-01 Sasha Smundak <asmundak@google.com>
6244 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
6245 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
6246 (py-unwind.o): New recipe.
6247 * NEWS: mention Python frame unwinding.
6248 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
6249 gdb/unwinder.py and gdb/command/unwinder.py
6250 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
6252 (execute_unwinders): New function.
6253 * python/lib/gdb/command/unwinders.py: New file.
6254 * python/lib/gdb/unwinder.py: New file.
6255 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
6256 (objfpy_dealloc): Decrement frame_unwinders reference count.
6257 (objfpy_initialize): Create frame_unwinders list.
6258 (objfpy_get_frame_unwinders): New function.
6259 (objfpy_set_frame_unwinders): Ditto.
6260 (objfile_getset): Add frame_unwinders attribute to Objfile.
6261 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
6262 (pspy_dealloc): Decrement frame_unwinders reference count.
6263 (pspy_initialize): Create frame_unwinders list.
6264 (pspy_get_frame_unwinders): New function.
6265 (pspy_set_frame_unwinders): Ditto.
6266 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
6267 * python/py-unwind.c: New file.
6268 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
6269 (objpy_get_frame_unwinders): New prototype.
6270 (gdbpy_initialize_unwind): New prototype.
6271 * python/python.c (gdbpy_apply_type_printers): Call
6272 gdbpy_initialize_unwind.
6274 2015-04-01 Pedro Alves <palves@redhat.com>
6276 * infrun.c (resume): Check currently_stepping after clearing
6277 stepped_breakpoint, not before.
6279 2015-04-01 Pedro Alves <palves@redhat.com>
6281 * infrun.c (print_target_wait_results): Print all the ptid
6284 2015-04-01 Pedro Alves <palves@redhat.com>
6286 * infrun.c (keep_going): Also discard cleanups if inserting
6289 2015-04-01 Pedro Alves <palves@redhat.com>
6291 * infrun.c (wait_for_inferior): Install the
6292 finish_thread_state_cleanup cleanup across the whole function, not
6293 just around handle_inferior_event.
6295 2015-04-01 Pedro Alves <palves@redhat.com>
6297 * infrun.c (resume) <step past permanent breakpoint>: Use
6300 2015-04-01 Pedro Alves <palves@redhat.com>
6302 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
6304 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
6306 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
6308 2015-04-01 Pedro Alves <palves@redhat.com>
6310 * linux-thread-db.c (record_thread): Readd the thread to gdb's
6311 list if it was marked exited.
6313 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
6315 * configure: Regenerated.
6317 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
6318 Jan Kratochvil <jan.kratochvil@redhat.com>
6319 Oleg Nesterov <oleg@redhat.com>
6322 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
6323 New enum identifying the various options of the coredump_filter
6325 (struct smaps_vmflags): New struct.
6326 (use_coredump_filter): New variable.
6327 (decode_vmflags): New function.
6328 (mapping_is_anonymous_p): Likewise.
6329 (dump_mapping_p): Likewise.
6330 (linux_find_memory_regions_full): New variables
6331 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
6332 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
6333 parsing of its information. Implement memory mapping filtering
6334 based on its contents.
6335 (show_use_coredump_filter): New function.
6336 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
6337 * NEWS: Mention the possibility of using the
6338 '/proc/PID/coredump_filter' file when generating a corefile.
6339 Mention new command 'set use-coredump-filter'.
6341 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
6343 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
6344 read_memory_unsigned_integer.
6346 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
6348 * Makefile.in (ZLIB): New.
6349 (ZLIBINC): Likewise.
6350 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
6351 (CLIBS): Add $(ZLIB).
6352 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
6354 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
6355 * top.c (print_gdb_configuration): Remove --with-zlib and
6357 * config.in: Regenerated.
6358 * configure: Likewise.
6360 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
6362 * NEWS: Mention info os cpus support.
6363 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
6364 (struct osdata_type): Add cpus entry, reorder the entries in
6367 2015-03-31 Matthias Klose <doko@ubuntu.com>
6369 * compile/compile.c (compile_to_object): Allow triplets with or
6372 2015-03-30 Doug Evans <dje@google.com>
6375 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
6376 klass in VAR_DOMAIN.
6378 2015-03-30 Gary Benson <gbenson@redhat.com>
6380 * remote.c (remote_mourn_1): Remove function. Update all callers
6381 to use remote_mourn.
6382 (extended_remote_mourn_1): Remove function. Update all callers
6383 to use extended_remote_mourn.
6384 (extended_remote_attach_1): Remove function. Update all callers
6385 to use extended_remote_attach.
6387 2015-03-28 James Bowman <james.bowman@ftdichip.com>
6389 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
6390 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
6391 (ALLDEPFILES): Add ft32-tdep.c.
6392 * configure.tgt: Add FT32 entry.
6393 * ft32-tdep.c: New file, FT32 target-dependent code.
6394 * ft32-tdep.h: New file, FT32 target-dependent code.
6396 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
6399 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
6401 * printcmd.c (print_command_1): Move expr variable scope.
6403 2015-03-27 Joel Brobecker <brobecker@adacore.com>
6405 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
6407 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
6409 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
6412 2015-03-26 Joel Brobecker <brobecker@adacore.com>
6414 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
6415 exception raised while parsing the probe arguments.
6416 Force parsing to be done using the C language parser.
6417 * expression.h (parse_expression_with_language): Declare.
6418 * parse.c (parse_expression_with_language): New function.
6420 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
6422 * MAINTAINERS (Write After Approval): Add "Jon Turney".
6424 2015-03-26 Andy Wingo <wingo@igalia.com>
6427 * dwarf2read.c (struct partial_die_info): Add has_const_value
6429 (add_partial_symbol): Don't punt on symbols that have const_value
6431 (read_partial_die): Detect DW_AT_const_value.
6433 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
6436 * printcmd.c (print_command_1): Move expr variable scope.
6438 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
6441 * printcmd.c (validate_format): Make the parameter cmdname const.
6443 2015-03-26 Don Breazeal <donb@codesourcery.com>
6445 * remote.c (_initialize_remote): Update comment.
6447 2015-03-26 Pedro Alves <palves@redhat.com>
6448 Jon TURNEY <jon.turney@dronecode.org.uk>
6450 * coffread.c (coff_symfile_read): When constructing the name of an
6451 import stub symbol from import symbol for amd64, only skip the
6452 char after _imp_ if the target is underscored (like i386) and the
6453 char is indeed the target's leading char.
6455 2015-03-25 Pedro Alves <palves@redhat.com>
6457 * target.h <to_async>: Replace 'callback' and 'context' parameters
6458 with boolean 'enable' parameter.
6459 (target_async): Replace CALLBACK and CONTEXT parameters with
6460 boolean ENABLE parameter.
6461 * inf-loop.c (inferior_event_handler): Adjust.
6462 * linux-nat.c (linux_nat_attach, linux_nat_resume)
6463 (linux_nat_resume): Adjust.
6464 (async_client_callback, async_client_context): Delete.
6465 (handle_target_event): Call inferior_event_handler directly.
6466 (linux_nat_async): Replace 'callback' and 'context' parameters
6467 with boolean 'enable' parameter. Adjust. Remove references to
6468 async_client_callback and async_client_context.
6469 (linux_nat_close): Adjust.
6470 * record-btrace.c (record_btrace_async): Replace 'callback' and
6471 'context' parameters with boolean 'enable' parameter. Adjust.
6472 (record_btrace_resume): Adjust.
6473 * record-full.c (record_full_async): Replace 'callback' and
6474 'context' parameters with boolean 'enable' parameter. Adjust.
6475 (record_full_resume, record_full_core_resume): Adjust.
6476 * remote.c (struct remote_state) <async_client_callback,
6477 async_client_context>: Delete fields.
6478 (remote_start_remote, extended_remote_attach_1, remote_resume)
6479 (extended_remote_create_inferior): Adjust.
6480 (remote_async_serial_handler): Call inferior_event_handler
6482 (remote_async): Replace 'callback' and 'context' parameters with
6483 boolean 'enable' parameter. Adjust.
6484 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
6486 * target-delegates.c: Regenerate.
6488 2015-03-25 Gary Benson <gbenson@redhat.com>
6489 Pedro Alves <palves@redhat.com>
6491 * target.c (fileio_ft_t): New typedef, define object vector.
6492 (fileio_fhandles): New static variable.
6493 (is_closed_fileio_fh): New macro.
6494 (lowest_closed_fd): New static variable.
6495 (acquire_fileio_fd): New function.
6496 (release_fileio_fd): Likewise.
6497 (fileio_fd_to_fh): New macro.
6498 (target_fileio_open): Wrap the file descriptor on success.
6499 (target_fileio_pwrite): Updated to use wrapped file descriptor.
6500 (target_fileio_pread): Likewise.
6501 (target_fileio_close): Likewise.
6503 2015-03-24 Pedro Alves <palves@redhat.com>
6505 * thread.c (thread_apply_all_command): Take exited threads into
6508 2015-03-24 Pedro Alves <palves@redhat.com>
6510 * infrun.c (resume, proceed): Mention
6511 switch_back_to_stepped_thread, not switch_back_to_stepping.
6513 2015-03-24 Pedro Alves <palves@redhat.com>
6515 * infrun.c (user_visible_resume_ptid): Rewrite going from
6516 most-locked to unlocked instead of the opposite. Move comment ...
6517 * infrun.h (user_visible_resume_ptid): ... here.
6519 2015-03-24 Pedro Alves <palves@redhat.com>
6521 * linux-nat.c (linux_nat_resume): Output debug logs before trying
6522 to resume the event lwp. Use the lwp's ptid instead of the passed
6523 in (maybe wildcard) ptid.
6524 (stop_wait_callback): Tweak debug log output.
6525 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
6527 (linux_nat_filter_event): In debug output, distinguish a
6528 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
6529 before trying to resume the lwp.
6531 2015-03-24 Joel Brobecker <brobecker@adacore.com>
6533 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
6534 pointer indirection.
6535 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
6536 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
6538 2015-03-24 Joel Brobecker <brobecker@adacore.com>
6540 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
6541 Renames DYN_ATTR_DATA_LOCATION.
6542 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
6543 DYN_ATTR_DATA_LOCATION.
6544 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
6545 instead of DYN_ATTR_DATA_LOCATION.
6547 2015-03-24 Pedro Alves <palves@redhat.com>
6549 * breakpoint.c (until_break_command): Adjust call to proceed.
6550 * gdbthread.h (struct thread_control_state) <stepping_command>:
6552 * infcall.c (run_inferior_call): Adjust call to proceed.
6553 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
6554 Adjust calls to proceed.
6555 (set_step_frame): Set the current thread's step_start_function
6557 (step_once): Adjust calls to proceed.
6558 (jump_command, signal_command, until_next_command)
6559 (finish_backward, finish_forward, proceed_after_attach_callback)
6560 (attach_command_post_wait): Adjust calls to proceed.
6561 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
6562 (do_target_resume): New function, factored out from ...
6563 (resume): ... here. Remove 'step' parameter. Instead, check
6564 currently_stepping to determine whether the thread should be
6566 (proceed): Remove 'step' parameter and don't set the thread's
6567 step_start_function here. Adjust call to 'resume'.
6568 (handle_inferior_event): Adjust calls to 'resume'.
6569 (switch_back_to_stepped_thread): Use do_target_resume instead of
6571 (keep_going): Adjust calls to 'resume'.
6572 * infrun.h (proceed): Remove 'step' parameter.
6574 * windows-nat.c (do_initial_windows_stuff): Adjust call to
6576 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
6578 2015-03-24 Pedro Alves <palves@redhat.com>
6580 * gdbthread.h (struct thread_control_state) <stepping_command>:
6582 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
6583 the thread's stepping_command field.
6584 * infrun.c (resume): Check the thread's stepping_command flag to
6585 determine which threads should be resumed. Rename 'entry_step'
6587 (clear_proceed_status_thread): Clear 'stepping_command'.
6588 (schedlock_applies): Change parameter type to struct thread_info
6590 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
6591 (switch_back_to_stepped_thread): Adjust calls to
6592 'schedlock_applies'.
6593 (_initialize_infrun): Adjust "set scheduler-locking step" help.
6595 2015-03-24 Pedro Alves <palves@redhat.com>
6597 * infrun.c (step_start_function): Delete and ...
6598 * gdbthread.h (struct thread_control_state) <step_start_function>:
6599 ... now a field here.
6600 * infrun.c (clear_proceed_status_thread): Clear the thread's
6601 step_start_function.
6602 (proceed, process_event_stop_test, print_stop_event): Adjust.
6604 2015-03-24 Pedro Alves <palves@redhat.com>
6606 * infrun.c (proceed): No longer handle negative step.
6608 2015-03-24 Gary Benson <gbenson@redhat.com>
6610 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
6611 (x86_linux_prepare_to_resume): Likewise.
6612 * x86-linux-nat.c (x86_linux_new_thread):
6613 Moved to nat/x86-linux.c.
6614 (x86_linux_prepare_to_resume): Likewise.
6615 * nat/x86-linux.c (x86_linux_new_thread): New function.
6616 (x86_linux_prepare_to_resume): Likewise.
6618 2015-03-24 Gary Benson <gbenson@redhat.com>
6620 * nat/x86-linux-dregs.h: New file.
6621 * nat/x86-linux-dregs.c: Likewise.
6622 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
6623 (x86-linux-dregs.o): New rule.
6624 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
6625 * config/i386/linux64.mh (NATDEPFILES): Likewise.
6626 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
6627 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
6628 (x86_linux_dr_get): Likewise.
6629 (x86_linux_dr_set): Likewise.
6630 (x86_linux_dr_get_addr): Likewise.
6631 (x86_linux_dr_get_control): Likewise.
6632 (x86_linux_dr_get_status): Likewise.
6633 (update_debug_registers_callback): Likewise.
6634 (x86_linux_dr_set_control): Likewise.
6635 (x86_linux_dr_set_addr): Likewise.
6636 (x86_linux_update_debug_registers): Likewise.
6638 2015-03-24 Gary Benson <gbenson@redhat.com>
6640 * x86-linux-nat.c (x86_linux_update_debug_registers):
6641 New function, factored out from...
6642 (x86_linux_prepare_to_resume): ...this.
6644 2015-03-24 Gary Benson <gbenson@redhat.com>
6646 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
6647 (x86_linux_dr_set): Likewise.
6648 (x86_linux_dr_get_addr): Likewise.
6649 (x86_linux_dr_get_control): Likewise.
6650 (x86_linux_dr_get_status): Likewise.
6651 (update_debug_registers_callback): Likewise.
6652 (x86_linux_dr_set_control): Likewise.
6653 (x86_linux_dr_set_addr): Likewise.
6654 (x86_linux_prepare_to_resume): Likewise.
6655 (x86_linux_new_thread): Likewise.
6657 2015-03-24 Gary Benson <gbenson@redhat.com>
6659 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
6660 (x86_linux_new_thread): Rename argument.
6662 2015-03-24 Gary Benson <gbenson@redhat.com>
6664 * nat/x86-linux.h: New file.
6665 * nat/x86-linux.c: Likewise.
6666 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
6667 (x86-linux.o): New rule.
6668 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
6669 * config/i386/linux64.mh (NATDEPFILES): Likewise.
6670 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
6671 (lwp_set_arch_private_info): New declaration.
6672 (lwp_arch_private_info): Likewise.
6673 * linux-nat.c (lwp_set_arch_private_info): New function.
6674 (lwp_arch_private_info): Likewise.
6675 * x86-linux-nat.c: Include nat/x86-linux.h.
6676 (arch_lwp_info): Removed structure.
6677 (update_debug_registers_callback):
6678 Use lwp_set_debug_registers_changed.
6679 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
6680 and lwp_set_debug_registers_changed.
6681 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
6683 2015-03-24 Gary Benson <gbenson@redhat.com>
6685 * nat/linux-nat.h (ptid_of_lwp): New declaration.
6686 (lwp_is_stopped): Likewise.
6687 (lwp_stop_reason): Likewise.
6688 * linux-nat.c (ptid_of_lwp): New function.
6689 (lwp_is_stopped): Likewise.
6690 (lwp_is_stopped_by_watchpoint): Likewise.
6691 * x86-linux-nat.c (update_debug_registers_callback):
6693 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
6696 2015-03-24 Gary Benson <gbenson@redhat.com>
6698 * linux-nat.h (linux_stop_lwp): Move declaration to...
6699 * nat/linux-nat.h (linux_stop_lwp): New declaration.
6701 2015-03-24 Gary Benson <gbenson@redhat.com>
6703 * linux-nat.h: Include nat/linux-nat.h.
6704 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
6705 * nat/linux-nat.h (struct lwp_info): New forward declaration.
6706 (iterate_over_lwps_ftype): New typedef.
6707 (iterate_over_lwps): New declaration.
6708 * linux-nat.h (iterate_over_lwps): Update comment. Use
6709 iterate_over_lwps_ftype. Update callback return value check.
6711 2015-03-24 Gary Benson <gbenson@redhat.com>
6713 * x86-nat.h (x86_debug_reg_state): Move declaration to...
6714 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
6716 2015-03-24 Gary Benson <gbenson@redhat.com>
6718 * nat/linux-nat.h (current_lwp_ptid): New declaration.
6719 * linux-nat.c (current_lwp_ptid): New function.
6720 * x86-linux-nat.c: Include nat/linux-nat.h.
6721 (x86_linux_dr_get_addr): Use current_lwp_ptid.
6722 (x86_linux_dr_get_control): Likewise.
6723 (x86_linux_dr_get_status): Likewise.
6724 (x86_linux_dr_set_control): Likewise.
6725 (x86_linux_dr_set_addr): Likewise.
6727 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
6729 PR breakpoints/16466
6730 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
6732 2015-03-23 Joel Brobecker <brobecker@adacore.com>
6734 * ser-mingw.c (ser_windows_setparity): Fix indentation.
6735 * ser-unix.c (hardwire_setparity): Likewise.
6737 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
6739 * NEWS: Mention set/show serial parity command.
6740 * monitor.c (monitor_open): Call serial_setparity.
6741 * remote.c (remote_open_1): Likewise.
6742 * ser-base.c (ser_base_serparity): New function.
6743 * ser-base.h (ser_base_setparity): Add declaration.
6744 * ser-go32.c (dos_ops): Set "setparity" field.
6745 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
6747 (ser_windows_setparity): New function.
6748 (hardwire_ops): Add ser_windows_setparity.
6749 (tty_ops): Add NULL for setparity field.
6750 (pipe_ops): Add ser_base_setparity.
6751 (tcp_ops): Likewise.
6752 * ser-pipe.c (pipe_ops): Likewise.
6753 * ser-tcp.c (tcp_ops): Likewise.
6754 * ser-unix.c (hardwire_setparity): Add declaration.
6755 (hardwire_raw): Don't reset PARENB flag.
6756 (hardwire_setparity): New function.
6757 (hardwire_ops): Add hardwire_setparity.
6758 * serial.c (serial_setparity): New function.
6759 (serial_parity): New global.
6760 (parity_none, parity_odd, parity_even, parity_enums, parity):
6762 (set_parity): New function.
6763 (_initialize_serial): Add set/show serial parity commands.
6764 * serial.h (GDBPARITY_NONE): Define.
6765 (GDBPARITY_ODD): Define.
6766 (GDBPARITY_EVEN): Define.
6767 (serial_setparity) Add declaration.
6768 (struct serial_ops): Add setparity field.
6769 * target.h (serial_parity): Add declaration.
6771 2015-03-23 Keith Seitz <keiths@redhat.com>
6773 * linespec.c (linespec_lexer_lex_keyword): Update comment.
6775 2015-03-23 Keith Seitz <keiths@redhat.com>
6777 * breakpoint.c (parse_breakpoint_sals): Use
6778 linespec_lexer_lex_keyword to ascertain if the user specified
6780 * linespec.c [IF_KEYWORD_INDEX]: Define.
6781 (linespec_lexer_lex_keyword): Export.
6782 (struct ls_parser) <keyword_ok>: Remove.
6783 A keyword is only a keyword if not followed by another keyword.
6784 (linespec_lexer_lex_one): Remove keyword_ok handling.
6785 Add comment explaining why the parsing stream is not advanced
6786 when a keyword is seen.
6787 (parse_linespec): Remove parser->keyword_ok.
6788 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
6790 2015-03-23 Keith Seitz <keiths@redhat.com>
6793 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
6794 if we find a static method with DW_AT_vtable_elem_location.
6796 2015-03-21 Eli Zaretskii <eliz@gnu.org>
6798 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
6799 before the second loop, to avoid undefined behavior. Reported by
6800 Anton Blanchard <anton@samba.org>.
6802 2015-03-20 Keven Boell <keven.boell@intel.com>
6804 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
6805 data_location usage to linked list.
6806 (resolve_dynamic_type_internal): Adapt data_location to
6808 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
6809 (copy_type_recursive, copy_type): Add copy of linked list.
6810 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
6811 (struct dynamic_prop_list): New struct.
6812 * dwarf2read.c (set_die_type): Set data_location data.
6814 2015-03-20 Pedro Alves <palves@redhat.com>
6816 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
6817 inner block and make it const.
6818 * machoread.c (get_archive_prefix_len): Make "lparen" const.
6820 2015-03-20 Pedro Alves <palves@redhat.com>
6822 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
6823 * breakpoint.h (set_breakpoint_condition): Update declaration.
6825 2015-03-20 Pedro Alves <palves@redhat.com>
6827 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
6829 2015-03-20 Pedro Alves <palves@redhat.com>
6831 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
6833 2015-03-20 Pedro Alves <palves@redhat.com>
6835 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
6837 2015-03-20 Pedro Alves <palves@redhat.com>
6839 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
6840 (nto_init_solib_absolute_prefix): Likewise.
6842 2015-03-20 Pedro Alves <palves@redhat.com>
6844 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
6845 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
6847 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
6849 * config/djgpp/README: Remove gdb.hp.
6851 2015-03-20 Yao Qi <yao.qi@linaro.org>
6853 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
6854 set_gdbarch_cannot_step_breakpoint.
6856 2015-03-19 Pedro Alves <palves@redhat.com>
6858 * linux-nat.c (linux_resume_one_lwp): Rename to ...
6859 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
6860 instead call perror_with_name.
6861 (check_ptrace_stopped_lwp_gone): New function.
6862 (linux_resume_one_lwp): Reimplement as wrapper around
6863 linux_resume_one_lwp_throw that swallows errors if the LWP is
6865 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
6866 swallows errors if the LWP is gone. Use
6867 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
6869 2015-03-19 Pedro Alves <palves@redhat.com>
6871 * linux-nat.c (status_callback): Return early if the LWP has no
6874 2015-03-19 Pedro Alves <palves@redhat.com>
6876 * linux-nat.c (select_event_lwp_callback): Update comment to no
6877 longer mention SIGTRAP.
6879 2015-03-18 Tristan Gingold <gingold@adacore.com>
6881 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
6882 redirection code to ...
6883 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
6884 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
6886 2015-03-18 Gary Benson <gbenson@redhat.com>
6888 (remote_protocol_features): Remove the "vFile:fstat" feature.
6889 (remote_hostio_fstat): Probe for "vFile:fstat" support.
6891 2015-03-11 Yao Qi <yao.qi@linaro.org>
6894 * aarch64-linux-tdep.c: Include xml-syscall.h
6895 (aarch64_linux_get_syscall_number): New function.
6896 (aarch64_linux_init_abi): Call
6897 set_gdbarch_get_syscall_number.
6898 * syscalls/aarch64-linux.xml: New file.
6900 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
6902 * ser-base.h (ser_base_setstopbits): Change second argument name
6903 from "rate" to "num".
6905 2015-03-17 Gary Benson <gbenson@redhat.com>
6906 Luke Allardyce <lukeallardyce@gmail.com>
6909 * common/common-remote-fileio.h (sys/stat.h): New include.
6910 (stuct stat): Remove forward declaration.
6912 2015-03-16 John Baldwin <jhb@FreeBSD.org>
6914 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
6915 before writing core register notes.
6917 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
6918 Pedro Alves <palves@redhat.com>
6920 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
6921 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
6922 (tgoto): Wrap with extern "C".
6924 2015-03-16 Pedro Alves <palves@redhat.com>
6925 Yuanhui Zhang <asmwarrior@gmail.com>
6927 * stub-termcap.c (tputs): Change prototype.
6929 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
6930 Pedro Alves <palves@redhat.com>
6932 * windows-nat.c (struct thread_info_struct): Rename to ...
6933 (struct windows_thread_info_struct): ... this.
6934 (thread_info): Rename to ...
6935 (windows_thread_info): ... this.
6938 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
6939 Pedro Alves <palves@redhat.com>
6941 * NEWS: New Removed targets and native configurations.
6943 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
6946 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
6947 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
6948 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
6949 ia64-hpux-tdep.h, solib-ia64-hpux.h.
6950 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
6951 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
6952 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
6954 * config/ia64/hpux.mh: Remove file.
6955 * config/pa/hpux.mh: Remove file.
6956 * configure: Rebuilt.
6957 * configure.ac (dlgetmodinfo, somread.o): Remove.
6958 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
6959 (ia64-*-hpux*): Remove its float format exception.
6960 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
6961 * hppa-hpux-nat.c: Remove file.
6962 * hppa-hpux-tdep.c: Remove file.
6963 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
6964 Move them here from hppa-tdep.h
6965 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
6966 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
6967 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
6968 Move them to hppa-tdep.c.
6969 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
6971 * ia64-hpux-nat.c: Remove file.
6972 * ia64-hpux-tdep.c: Remove file.
6973 * ia64-hpux-tdep.h: Remove file.
6974 * inf-ttrace.c: Remove file.
6975 * inf-ttrace.h: Remove file.
6976 * solib-ia64-hpux.c: Remove file.
6977 * solib-ia64-hpux.h: Remove file.
6978 * solib-pa64.c: Remove file.
6979 * solib-pa64.h: Remove file.
6980 * solib-som.c: Remove file.
6981 * solib-som.h: Remove file.
6982 * somread.c: Remove file.
6984 2015-03-13 John Baldwin <jhb@FreeBSD.org>
6986 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
6987 * config.in: Regenerate.
6988 * configure: Regenerate.
6989 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
6991 (fbsd_find_memory_regions): Use kinfo_getvmmap to
6992 enumerate memory regions if present.
6994 2015-03-13 John Baldwin <jhb@FreeBSD.org>
6996 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
6997 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
6999 (i386fbsd_sigtramp_p): Likewise.
7001 2015-03-12 John Baldwin <jhb@FreeBSD.org>
7003 * MAINTAINERS (Write After Approval): Add John Baldwin.
7005 2015-03-12 Gary Benson <gbenson@redhat.com>
7007 * solib.c (_initialize_solib): Make "set/show sysroot" use
7008 add_setshow_optional_filename_cmd so it can be restored to
7009 empty after being set.
7011 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
7013 * Makefile.in (SFILES): New source break-catch-syscall.c.
7014 (COMMON_OBS): New object break-catch-syscall.o.
7015 * break-catch-syscall.c: New file.
7016 * breakpoint.c: Remove inclusion of "xml-syscall.h".
7017 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
7018 (struct syscall_catchpoint): Likewise.
7019 (dtor_catch_syscall): Likewise.
7020 (catch_syscall_inferior_data): Likewise.
7021 (struct catch_syscall_inferior_data): Likewise.
7022 (get_catch_syscall_inferior_data): Likewise.
7023 (catch_syscall_inferior_data_cleanup): Likewise.
7024 (insert_catch_syscall): Likewise.
7025 (remove_catch_syscall): Likewise.
7026 (breakpoint_hit_catch_syscall): Likewise.
7027 (print_it_catch_syscall): Likewise.
7028 (print_one_catch_syscall): Likewise.
7029 (print_mention_catch_syscall): Likewise.
7030 (print_recreate_catch_syscall): Likewise.
7031 (catch_syscall_breakpoint_ops): Likewise.
7032 (syscall_catchpoint_p): Likewise.
7033 (create_syscall_event_catchpoint): Likewise.
7034 (catch_syscall_split_args): Likewise.
7035 (catch_syscall_command_1): Likewise.
7036 (is_syscall_catchpoint_enabled): Likewise.
7037 (catch_syscall_enabled): Likewise.
7038 (catching_syscall_number): Likewise.
7039 (catch_syscall_completer): Likewise.
7040 (clear_syscall_counts): Likewise.
7041 (initialize_breakpoint_ops): Move initialization of syscall
7042 catchpoints to break-catch-syscall.c.
7043 (_initialize_breakpoint): Move code related to syscall catchpoints
7044 to break-catch-syscall.c.
7046 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
7048 * breakpoint.c (breakpoint_find_if): New function.
7049 * breakpoint.h (breakpoint_find_if): New prototype.
7051 2015-03-11 Gary Benson <gbenson@redhat.com>
7053 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
7054 * remote-fileio.c (remote_fileio_to_host_uint): New function.
7055 (remote_fileio_to_host_ulong): Likewise.
7056 (remote_fileio_to_host_mode): Likewise.
7057 (remote_fileio_to_host_time): Likewise.
7058 (remote_fileio_to_host_stat): Likewise.
7059 * remote.c (PACKET_vFile_fstat): New enum value.
7060 (remote_protocol_features): Register the "vFile:fstat" feature.
7061 (remote_hostio_fstat): New function.
7062 (remote_bfd_iovec_stat): Use the above.
7063 (_initialize_remote): Register new "set/show remote
7064 hostio-fstat-packet" command.
7065 * symfile.c (separate_debug_file_exists): Update comment.
7066 * NEWS: Announce new vFile:fstat packet.
7068 2015-03-11 Gary Benson <gbenson@redhat.com>
7070 * common/common-remote-fileio.h: New file.
7071 * common/common-remote-fileio.c: Likewise.
7072 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
7073 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
7074 (COMMON_OBS): Add common-remote-fileio.o.
7075 (common-remote-fileio.o): New rule.
7076 * remote-fileio.h (common-remote-fileio.h): New include.
7077 * remote-fileio.c (gdb/fileio.h): Do not include.
7078 (remote_fileio_to_be): Moved to common-remote-fileio.h.
7079 (remote_fileio_to_fio_uint): Likewise.
7080 (remote_fileio_to_fio_time): Likewise.
7081 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
7082 (remote_fileio_to_fio_mode): Likewise.
7083 (remote_fileio_to_fio_ulong): Likewise.
7084 (remote_fileio_to_fio_stat): Likewise.
7086 2015-03-11 Andy Wingo <wingo@igalia.com>
7088 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
7089 we were checking the cached type, not the cached dynamic type.
7091 2015-03-11 Andy Wingo <wingo@igalia.com>
7093 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
7094 other strings, as these are on the GC'd heap, and will be
7095 collected along with the smob.
7097 2015-03-11 Andy Wingo <wingo@igalia.com>
7099 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
7100 (objfile_functions): Bind gdbscm_objfile_progspace to
7102 * guile/lib/gdb.scm: Add objfile-progspace to exports.
7104 2015-03-11 Andy Wingo <wingo@igalia.com>
7106 * guile/guile.c (_initialize_guile): Disable automatic
7107 finalization, if Guile offers us that possibility.
7108 * guile/guile.c (call_initialize_gdb_module):
7109 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
7110 finalizers in appropriate places.
7111 * configure.ac (AC_TRY_LIBGUILE): Add a check for
7112 scm_set_automatic_finalization_enabled.
7113 * configure: Regenerated.
7115 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
7117 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
7120 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
7122 * s390-linux-nat.c (struct arch_lwp_info): New.
7123 (s390_fix_watch_points): Rename to...
7124 (s390_prepare_to_resume): ...this. Skip the PER info update
7125 unless the watch points have changed.
7126 (s390_refresh_per_info, s390_new_thread): New functions.
7127 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
7128 s390_fix_watch_points.
7129 (s390_remove_watchpoint): Likewise.
7130 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
7131 Register s390_prepare_to_resume.
7133 2015-03-09 Pedro Alves <palves@redhat.com>
7136 2015-03-07 Pedro Alves <palves@redhat.com>
7137 * common/gdb_socket.h: New file.
7138 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
7140 (net_open): Use union gdb_sockaddr_u.
7142 2015-03-07 Pedro Alves <palves@redhat.com>
7144 * configure.ac (build_warnings): Move -Wmissing-prototypes
7145 -Wdeclaration-after-statement -Wmissing-parameter-type
7146 -Wold-style-declaration -Wold-style-definition to the C-specific
7148 * configure: Regenerate.
7150 2015-03-07 Pedro Alves <palves@redhat.com>
7152 * common/gdb_socket.h: New file.
7153 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
7155 (net_open): Use union gdb_sockaddr_u.
7157 2015-03-07 Pedro Alves <palves@redhat.com>
7159 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
7160 (exceptions_state_mc_action_iter)
7161 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
7163 [__cplusplus] (try_scope_depth): New global.
7164 [__cplusplus] (exception_try_scope_entry)
7165 (exception_try_scope_exit, gdb_exception_sliced_copy)
7166 (exception_rethrow): New functions.
7167 (throw_exception): In C++ mode, throw
7168 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
7169 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
7170 (throw_it): In C++ mode, use try_scope_depth.
7171 * common/common-exceptions.h [!__cplusplus]
7172 (exceptions_state_mc_action_iter)
7173 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
7175 [__cplusplus] (exception_try_scope_entry)
7176 (exception_try_scope_exit, exception_rethrow): Declare.
7177 [__cplusplus] (struct exception_try_scope): New struct.
7178 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
7180 (struct gdb_exception_RETURN_MASK_ALL)
7181 (struct gdb_exception_RETURN_MASK_ERROR)
7182 (struct gdb_exception_RETURN_MASK_QUIT): New types.
7184 2015-03-07 Pedro Alves <palves@redhat.com>
7186 * main.c (handle_command_errors): Remove volatile qualifier from
7189 2015-03-07 Pedro Alves <palves@redhat.com>
7191 * breakpoint.c (save_breakpoints): Adjust to avoid code between
7193 * gdbtypes.c (safe_parse_type): Remove empty line.
7194 (types_deeply_equal):
7195 * guile/scm-frame.c (gdbscm_frame_name):
7196 * linux-thread-db.c (find_new_threads_once):
7197 * python/py-breakpoint.c (bppy_get_commands):
7198 * record-btrace.c (record_btrace_insert_breakpoint)
7199 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
7200 (record_btrace_start_replaying): Adjust to avoid code between TRY
7203 2015-03-07 Pedro Alves <palves@redhat.com>
7205 * common/common-exceptions.c (struct catcher) <exception>: No
7206 longer a pointer to volatile exception. Now an exception value.
7207 <mask>: Delete field.
7208 (exceptions_state_mc_init): Remove all parameters. Adjust.
7209 (exceptions_state_mc): No longer pop the catcher here.
7210 (exceptions_state_mc_catch): New function.
7211 (throw_exception): Adjust.
7212 * common/common-exceptions.h (exceptions_state_mc_init): Remove
7214 (exceptions_state_mc_catch): Declare.
7215 (TRY_CATCH): Rename to ...
7216 (TRY): ... this. Remove EXCEPTION and MASK parameters.
7217 (CATCH, END_CATCH): New.
7218 All callers adjusted.
7220 2015-03-07 Tom Tromey <tromey@redhat.com>
7222 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
7224 2015-03-07 Pedro Alves <palves@redhat.com>
7226 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
7227 (amd64_epilogue_frame_cache): Normal exception handling code.
7228 * break-catch-throw.c (check_status_exception_catchpoint)
7229 (re_set_exception_catchpoint): Ditto.
7230 * cli/cli-interp.c (safe_execute_command):
7231 * cli/cli-script.c (script_from_file): Ditto.
7232 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
7234 * compile/compile-object-run.c (compile_object_run): Ditto.
7235 * cp-abi.c (baseclass_offset): Ditto.
7236 * cp-valprint.c (cp_print_value): Ditto.
7237 * exceptions.c (catch_exceptions_with_msg):
7238 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
7239 * frame.c (get_frame_address_in_block_if_available): Ditto.
7240 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
7241 (i386_sigtramp_frame_cache): Ditto.
7242 * infcmd.c (post_create_inferior): Ditto.
7243 * linespec.c (parse_linespec, find_linespec_symbols):
7244 * p-valprint.c (pascal_object_print_value): Ditto.
7245 * parse.c (parse_expression_for_completion): Ditto.
7246 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
7247 * remote.c (remote_get_noisy_reply): Ditto.
7248 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
7249 * solib-svr4.c (solib_svr4_r_map): Ditto.
7251 2015-03-06 Gary Benson <gbenson@redhat.com>
7253 * common/common-utils.h (startswith): New inline function.
7254 All places where this logic was used updated to use the above.
7256 2015-03-05 Pedro Alves <palves@redhat.com>
7259 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
7260 after reading the breakpoint's shadow memory.
7262 2015-03-05 Mark Kettenis <kettenis@gnu.org>
7264 * hppabsd-nat.c: Remove file.
7265 * hppaobsd-nat.c: New file.
7266 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
7268 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
7271 2015-03-04 Pedro Alves <palves@redhat.com>
7273 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
7274 (target_decr_pc_after_break): Delete declaration.
7275 * target.c (default_target_decr_pc_after_break)
7276 (target_decr_pc_after_break): Delete.
7277 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
7278 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
7279 * linux-thread-db.c (check_event): Likewise.
7280 * infrun.c (adjust_pc_after_break): Likewise.
7281 * darwin-nat.c (cancel_breakpoint): Likewise.
7282 * aix-thread.c (aix_thread_wait): Likewise.
7283 * target-delegates.c: Regenerate.
7285 2015-03-04 Pedro Alves <palves@redhat.com>
7287 * linux-nat.c (save_sigtrap): Check for breakpoints before
7288 checking watchpoints.
7289 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
7290 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
7291 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
7292 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
7293 (linux_nat_stopped_by_sw_breakpoint)
7294 (linux_nat_supports_stopped_by_sw_breakpoint)
7295 (linux_nat_stopped_by_hw_breakpoint)
7296 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
7297 (linux_nat_wait_1): Don't re-increment the PC if relying on
7298 SIGTRAP's siginfo->si_code.
7299 (linux_nat_add_target): Install new target methods.
7300 * linux-thread-db.c (check_event): Don't account for breakpoint PC
7301 offset if the target already adjusted the PC.
7302 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
7303 (GDB_ARCH_TRAP_BRKPT): New.
7304 (TRAP_HWBKPT): Define if not already defined.
7306 2015-03-04 Pedro Alves <palves@redhat.com>
7308 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
7309 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
7311 <stop_reason>: New field.
7312 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
7313 (packet_set_cmd_state): New function.
7314 (remote_protocol_features): Register the "swbreak" and "hwbreak"
7316 (remote_query_supported): If not disabled with the corresponding
7317 "set remote foo-packet" command, report support for the swbreak
7318 and hwbreak features.
7319 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
7321 <stop_reason>: New field.
7322 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
7323 (remote_wait_as): Adjust.
7324 (remote_stopped_by_sw_breakpoint)
7325 (remote_supports_stopped_by_sw_breakpoint)
7326 (remote_stopped_by_hw_breakpoint)
7327 (remote_supports_stopped_by_hw_breakpoint): New functions.
7328 (remote_stopped_by_watchpoint): New function.
7329 (init_remote_ops): Install them.
7330 (_initialize_remote): Register new "set/show remote
7331 swbreak-feature-packet" and "set/show remote
7332 swbreak-feature-packet" commands.
7334 2015-03-04 Pedro Alves <palves@redhat.com>
7336 * btrace.h: Include target/waitstatus.h.
7337 (struct btrace_thread_info) <stop_reason>: New field.
7338 * record-btrace.c (record_btrace_step_thread): Use
7339 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
7340 (record_btrace_decr_pc_after_break): Delete.
7341 (record_btrace_stopped_by_sw_breakpoint)
7342 (record_btrace_supports_stopped_by_sw_breakpoint)
7343 (record_btrace_stopped_by_hw_breakpoint)
7344 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
7345 (init_record_btrace_ops): Install them.
7346 * record-full.c (record_full_hw_watchpoint): Delete and replace
7348 (record_full_stop_reason): ... this throughout.
7349 (record_full_exec_insn): Adjust.
7350 (record_full_wait_1): Adjust. No longer re-increment the PC.
7351 (record_full_wait_1): Adjust. Use
7352 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
7353 (record_full_stopped_by_watchpoint): Adjust.
7354 (record_full_stopped_by_sw_breakpoint)
7355 (record_full_supports_stopped_by_sw_breakpoint)
7356 (record_full_supports_stopped_by_sw_breakpoint)
7357 (record_full_stopped_by_hw_breakpoint)
7358 (record_full_supports_stopped_by_hw_breakpoint): New functions.
7359 (init_record_full_ops, init_record_full_core_ops): Install them.
7360 * record.c (record_check_stopped_by_breakpoint): New function.
7361 * record.h: Include target/waitstatus.h.
7362 (record_check_stopped_by_breakpoint): New declaration.
7364 2015-03-04 Pedro Alves <palves@redhat.com>
7366 enum lwp_stop_reason -> enum target_stop_reason
7367 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
7368 (linux_nat_stopped_by_watchpoint, status_callback)
7369 (linux_nat_wait_1): Adjust.
7370 * linux-nat.h (enum lwp_stop_reason): Delete.
7371 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
7372 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
7373 * target/waitstatus.h (enum target_stop_reason): New.
7375 2015-03-04 Pedro Alves <palves@redhat.com>
7377 * breakpoint.c (need_moribund_for_location_type): New function.
7378 (bpstat_stop_status): Don't skipping checking moribund locations
7379 of breakpoint types which the target tell caused a stop.
7380 (program_breakpoint_here_p): New function, factored out from ...
7381 (bp_loc_is_permanent): ... this.
7382 (update_global_location_list): Don't create a moribund location if
7383 the target supports reporting stops of the type of the removed
7385 * breakpoint.h (program_breakpoint_here_p): New declaration.
7386 * infrun.c (adjust_pc_after_break): Return early if the target has
7387 already adjusted the PC. Add comments.
7388 (handle_signal_stop): If nothing explains a signal, and the target
7389 tells us the stop was caused by a software breakpoint, check if
7390 there's a breakpoint instruction in the memory. If so, adjust the
7391 PC before presenting the stop to the user. Otherwise, ignore the
7392 trap. If nothing explains a signal, and the target tells us the
7393 stop was caused by a hardware breakpoint, ignore the trap.
7394 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
7395 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
7396 to_supports_stopped_by_hw_breakpoint>: New fields.
7397 (target_stopped_by_sw_breakpoint)
7398 (target_supports_stopped_by_sw_breakpoint)
7399 (target_stopped_by_hw_breakpoint)
7400 (target_supports_stopped_by_hw_breakpoint): Define.
7401 * target-delegates.c: Regenerate.
7403 2015-03-04 Pedro Alves <palves@redhat.com>
7405 * infrun.c (follow_fork_inferior): Use the whole of the
7406 inferior_ptid and pending_follow.related_pid ptids instead of
7407 building ptids from the process components. Adjust verbose output
7408 to use target_pid_to_str.
7409 * linux-nat.c (linux_child_follow_fork): Use the whole of the
7410 inferior_ptid and pending_follow.related_pid ptids instead of
7411 building ptids from the process components.
7413 2015-03-04 Mark Kettenis <kettenis@gnu.org>
7415 * inf-ptrace.c [PT_GET_PROCESS_STATE]
7416 (inf_ptrace_insert_fork_catchpoint): New function.
7417 (inf_ptrace_remove_fork_catchpoint): New function.
7418 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
7420 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
7422 * s390-linux-tdep.c (s390_register_name): Return empty string
7423 instead of NULL for registers that shouldn't be visible.
7425 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
7427 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
7428 XML file for 64-bit targets.
7430 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
7432 * target.h (find_default_create_inferior): Remove declaration.
7433 (find_default_attach): Likewise.
7435 2015-03-03 Pedro Alves <palves@redhat.com>
7437 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
7438 Use ptid_get_pid to get the overall process id when resuming all
7441 2015-03-03 Pedro Alves <palves@redhat.com>
7443 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
7444 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
7445 * inf-ptrace.c (get_ptrace_pid): New function.
7446 (inf_ptrace_resume): Use it.
7447 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
7450 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
7452 * nat/linux-btrace.c: Include sys/utsname.h.
7453 (linux_determine_kernel_ptr_bits): New.
7454 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
7455 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
7458 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
7460 * btrace.c (ftrace_update_function): Treat return as tailcall for
7461 "_dl_runtime_resolve".
7463 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
7465 * btrace.h (btrace_function) <lbegin, lend>: Remove.
7466 * btrace.c (ftrace_debug): Do not print the line range.
7467 (ftrace_skip_file, ftrace_update_lines): Remove.
7468 (ftrace_new_function): Remove lbegin and lend initialization.
7469 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
7470 * record-btrace.c (btrace_compute_src_line_range): New.
7471 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
7473 2015-03-02 Pedro Alves <palves@redhat.com>
7475 * infrun.c (follow_exec): Delete all threads of the process except
7476 the event thread. Extended comments.
7478 2015-03-02 Joel Brobecker <brobecker@adacore.com>
7480 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
7482 2015-03-02 Joel Brobecker <brobecker@adacore.com>
7484 * utils.h: Remove <stdbool.h> #include.
7485 (producer_is_gcc): Change return type to "int".
7486 * utils.c (producer_is_gcc): Change return type to int.
7487 Return 1 instead of true, and 0 instead of false.
7488 Adjust function documentation accordingly.
7490 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
7492 * s390-linux-nat.c (have_regset_vxrs): New static variable.
7493 (s390_linux_fetch_inferior_registers): Handle vector registers, if
7495 (s390_linux_store_inferior_registers): Likewise.
7496 (s390_get_hwcap): Remove function. Embed its logic...
7497 (s390_read_description): ...here. Yield a target description with
7498 vector registers if applicable.
7499 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
7500 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
7501 "features/s390x-tevx-linux64.c".
7502 (struct gdbarch_tdep) <v0_full_regnum>: New field.
7503 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
7504 for "GNU/Linux-specific registers".
7505 (s390_dwarf_reg_r0l): New enum value.
7506 (s390_dwarf_reg_to_regnum): Support vector registers.
7507 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
7508 of GPR lower halves.
7509 (regnum_is_vxr_full): New function.
7510 (s390_register_name): New function.
7511 (s390_pseudo_register_name): Handle v0-v15, which are composed of
7512 f0-f15 and v0l-v15l.
7513 (s390_pseudo_register_type): Likewise.
7514 (s390_pseudo_register_read): Likewise.
7515 (s390_pseudo_register_write): Likewise.
7516 (s390_value_from_register): Account for the fact that values are
7517 placed left-justified in vector registers.
7518 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
7519 the vector reggroup and omit them from the general reggroup.
7520 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
7521 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
7522 (s390_iterate_over_regset_sections): Add iterations for the two
7524 (s390_core_read_description): Yield a target description with
7525 vector registers if applicable.
7526 (s390_gdbarch_init): Handle target descriptions with vector
7527 registers. Add "register_name" gdbarch method.
7528 (_initialize_s390_tdep): Call new tdesc initialization functions.
7529 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
7530 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
7531 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
7532 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
7533 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
7534 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
7535 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
7536 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
7537 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
7538 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
7539 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
7540 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
7541 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
7542 (S390_NUM_REGS): Adjust value.
7543 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
7544 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
7545 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
7546 * NEWS: Announce S/390 vector register support.
7548 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
7550 * features/s390-tevx-linux64.xml: New file.
7551 * features/s390-vx-linux64.xml: New file.
7552 * features/s390-vx.xml: New file.
7553 * features/s390x-tevx-linux64.xml: New file.
7554 * features/s390x-vx-linux64.xml: New file.
7555 * features/Makefile (WHICH): Add s390-vx-linux64,
7556 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
7557 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
7558 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
7560 * features/s390-tevx-linux64.c: New generated file.
7561 * features/s390-vx-linux64.c: Likewise.
7562 * features/s390x-tevx-linux64.c: Likewise.
7563 * features/s390x-vx-linux64.c: Likewise.
7564 * regformats/s390-tevx-linux64.dat: Likewise.
7565 * regformats/s390-vx-linux64.dat: Likewise.
7566 * regformats/s390x-tevx-linux64.dat: Likewise.
7567 * regformats/s390x-vx-linux64.dat: Likewise.
7569 2015-02-28 Doug Evans <xdje42@gmail.com>
7571 * symtab.h (struct symtab) <next>: Fix comment.
7573 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
7575 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
7578 2015-02-27 Pedro Alves <palves@redhat.com>
7580 * dtrace-probe.c (dtrace_probe_ops): Make extern.
7582 2015-02-27 Pedro Alves <palves@redhat.com>
7584 * common/common-exceptions.h (exception_none): Declare.
7585 * common/common-exceptions.c (exception_none): Moved from
7587 (exceptions_state_mc_init): Use exception_none.
7588 * exceptions.c (exception_none): Move to
7589 common/common-exceptions.c.
7590 * exceptions.h (exception_none): Move to
7591 common/common-exceptions.h.
7593 2015-02-27 Pedro Alves <palves@redhat.com>
7595 * main.c (catch_command_errors, catch_command_errors_const):
7596 Remove 'mask' argument. Adjust.
7597 (captured_main): Adjust callers.
7599 2015-02-27 Pedro Alves <palves@redhat.com>
7601 * python/python-internal.h: Include "extension-priv.h".
7603 2015-02-27 Pedro Alves <palves@redhat.com>
7605 * breakpoint.h (enum print_stop_action): Move further up in the
7608 2015-02-27 Pedro Alves <palves@redhat.com>
7610 * gdbarch.sh: Include regcache.h.
7611 * gdbarch.h: Regenerate.
7613 2015-02-27 Pedro Alves <palves@redhat.com>
7615 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
7616 Remove duplicate const.
7617 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
7620 2015-02-27 Pedro Alves <palves@redhat.com>
7622 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
7623 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
7624 * features/feature_to_c.sh: Tag the generated xml_builtin array
7625 with extern const in C++ mode.
7627 2015-02-27 Tom Tromey <tromey@redhat.com>
7629 * minidebug.c (struct lzma_stream): Rename to ...
7630 (struct gdb_lzma_stream): ... this.
7631 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
7633 2015-02-27 Pedro Alves <palves@redhat.com>
7635 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
7637 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
7638 (mi_cmd_stack_list_variables): Use it.
7640 2015-02-27 Pedro Alves <palves@redhat.com>
7642 * x86-linux-nat.c (u_debugreg_offset): New function.
7643 (x86_linux_dr_get, x86_linux_dr_set): Use it.
7645 2015-02-27 Pedro Alves <palves@redhat.com>
7647 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
7649 Include break-common.h.
7651 2015-02-27 Tom Tromey <tromey@redhat.com>
7652 Pedro Alves <palves@redhat.com>
7654 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
7655 local used to iterate over enums.
7656 * completer.c (signal_completer): Likewise.
7657 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
7658 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
7659 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
7660 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
7661 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
7662 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
7663 * tui-wingeneral.c (tui_refresh_all): Likewise.
7665 2015-02-27 Pedro Alves <palves@redhat.com>
7667 * target.h: Include "infrun.h".
7669 2015-02-27 Pedro Alves <palves@redhat.com>
7671 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
7673 2015-02-27 Pedro Alves <palves@redhat.com>
7675 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
7677 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
7679 2015-02-27 Pedro Alves <palves@redhat.com>
7681 * cli-out.c (_rl_erase_entire_line): Move declaration out of
7682 cli_mld_erase_entire_line, and make it extern "C".
7683 * common/common-defs.h (EXTERN_C): New.
7684 * completer.c (_rl_completion_prefix_display_length)
7685 (_rl_print_completions_horizontally, QSFUNC): Move declarations
7686 out of gdb_display_match_list_1.
7687 (_rl_qsort_string_compare): Move declaration out of
7688 gdb_display_match_list_1, and make it extern "C".
7689 * defs.h (re_comp): Use EXTERN_C.
7690 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
7691 and make it extern "C".
7692 (monstartup): Move declaration out of maintenance_set_profile_cmd,
7693 and make it extern "C".
7694 (main): Move declaration out of maintenance_set_profile_cmd.
7695 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
7698 2015-02-27 Pedro Alves <palves@redhat.com>
7700 * python/python.c (GdbMethods): Rename to ...
7701 (python_GdbMethods): ... this and make extern.
7702 (GdbModuleDef): Rename to ...
7703 (python_GdbModuleDef): ... this and make extern.
7705 2015-02-27 Pedro Alves <palves@redhat.com>
7707 * record-btrace.c (set_record_btrace_cmdlist)
7708 (show_record_btrace_cmdlist): Remove redefinitions.
7710 2015-02-27 Tom Tromey <tromey@redhat.com>
7711 Pedro Alves <palves@redhat.com>
7713 * dwarf2-frame.c (enum cfa_how_kind, struct
7714 dwarf2_frame_state_reg_info): Move out of struct
7716 * dwarf2read.c (struct tu_stats): Move out of struct
7718 (struct file_entry): Move out of struct line_header.
7719 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
7720 typedef_field_list): Move out of struct field_info.
7721 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
7722 Move out of struct dynamic_prop.
7723 (union type_owner, union field_location, struct field, struct
7724 range_bounds, union type_specific): Move out of struct main_type.
7725 (struct fn_fieldlist, struct fn_field, struct typedef_field)
7726 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
7727 (struct call_site_target, union call_site_parameter_u, struct
7728 call_site_parameter): Move out of struct call_site.
7729 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
7731 (enum srcdest_kind): Move out of struct srcdest.
7732 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
7733 * prologue-value.h (enum prologue_value_kind): Move out of struct
7735 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
7737 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
7738 out of struct field_info.
7739 * symfile.h (struct other_sections): Move out of struct
7741 * symtab.c (struct symbol_cache_slot): Move out struct
7743 * target-descriptions.c (enum tdesc_type_kind): Move out of
7744 typedef struct tdesc_type.
7745 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
7746 struct tui_line_or_address.
7747 * value.c (enum internalvar_kind, union internalvar_data): Move
7748 out of struct internalvar.
7749 * xtensa-tdep.h (struct ctype_cache): Move out of struct
7752 2015-02-27 Tom Tromey <tromey@redhat.com>
7753 Pedro Alves <palves@redhat.com>
7755 Rename symbols whose names are reserved C++ keywords throughout.
7757 2015-02-27 Pedro Alves <palves@redhat.com>
7759 * Makefile.in (COMPILER): New, get it from autoconf.
7760 (COMPILE.pre, CC_LD): Use COMPILER.
7761 (CXX): Get from autoconf instead.
7762 (CXX_FOR_TARGET): Default to g++ instead of gcc.
7763 * acinclude.m4: Include build-with-cxx.m4.
7764 * build-with-cxx.m4: New file.
7765 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
7766 Disable -Werror by default if building in C++ mode.
7767 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
7768 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
7769 Run supported-warning-flags tests with the C++ compiler.
7770 Save/restore CXXFLAGS too.
7771 * configure: Regenerate.
7773 2015-02-27 Pedro Alves <palves@redhat.com>
7775 * libiberty.m4: New file.
7776 * acinclude.m4: Include libiberty.m4.
7777 * configure.ac: Call libiberty_INIT.
7778 * config.in, configure: Regenerate.
7780 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
7782 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
7783 31-bit targets, but 64-bit targets as well.
7784 (s390_gnu_triplet_regexp): New function.
7785 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
7786 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
7789 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
7791 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
7792 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
7793 from CONTEXT_DEBUGGER.
7795 2015-02-26 Doug Evans <dje@google.com>
7797 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
7799 (set_type_vptr_fieldno): Ditto.
7800 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
7801 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
7803 2015-02-26 Pedro Alves <palves@redhat.com>
7805 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
7806 * complaints.c (vcomplaint): Pass argument FMT directly to
7807 printf-like functions instead of complaint->fmt.
7808 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
7809 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
7810 * compile/compile-loc2c.c (pushf, unary, binary): Add
7812 (do_compile_dwarf_expr_to_c): Pass string literal as format string
7814 (BINARY): Pass string literal as format string to 'binary'.
7815 * compile/compile-object-load.c (link_callbacks_einfo): Add
7817 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
7819 2015-02-26 Pedro Alves <palves@redhat.com>
7821 * windows-termcap.c: Rename to ...
7822 * stub-termcap.c: ... this. Adjust header line.
7823 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
7825 * configure: Regenerate.
7826 * configure.ac: Refer to stub-termcap.o instead of
7828 * gdb_curses.h: Mention stub-termcap.c instead of
7831 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
7833 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
7834 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
7836 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
7838 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
7840 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
7842 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
7843 bfd_canonicalize_symtab.
7845 2015-02-25 John Baldwin <jhb@FreeBSD.org>
7847 * amd64fbsd-nat.c: Include sys/user.h.
7848 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
7849 instead of KERN_PS_STRINGS to locate the signal trampoline.
7850 * i386fbsd-nat.c: Include sys/user.h.
7851 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
7852 instead of KERN_PS_STRINGS to locate the signal trampoline.
7853 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
7854 (amd64fbsd_sigtramp_p): New.
7855 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
7856 longer set default values.
7857 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
7858 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
7859 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
7860 (i386fbsd_freebsd4_sigtramp_start)
7861 (i386fbsd_freebsd4_sigtramp_middle)
7862 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
7863 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
7864 (i386fbsd_sigtramp_p): New.
7865 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
7866 longer set default values.
7867 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
7869 2015-02-25 John Baldwin <jhb@freebsd.org>
7871 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
7872 get_frame_register instead of frame_unwind_register_unsigned.
7874 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
7877 * compile/compile-c-support.c (c_compute_program): Change // comment.
7878 * compile/compile-object-load.c (setup_sections): Change // comment.
7880 2015-02-26 Joel Brobecker <brobecker@adacore.com>
7883 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
7885 2015-02-23 Pedro Alves <palves@redhat.com>
7887 * remote.c (skip_to_semicolon): New function.
7888 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
7889 special case the stop reasons that look like hex numbers
7890 upfront. Instead handle real register numbers after matching
7891 all the known stop reasons.
7893 2015-02-21 Doug Evans <dje@google.com>
7895 PR c++/17976, symtab/17821
7896 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
7897 is_in_anonymous. All callers updated.
7898 (find_symbol_in_baseclass): Ditto.
7899 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
7900 for symbols in an anonymous namespace.
7901 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
7902 DW_AT_name directly.
7903 (dwarf2_name): Convert missing namespace name to
7904 CP_ANONYMOUS_NAMESPACE_STR.
7906 2015-02-20 Pedro Alves <palves@redhat.com>
7908 * linux-nat.c (linux_handle_extended_wait): Call
7909 thread_db_notice_clone whenever a new clone LWP is detected.
7910 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
7912 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
7913 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
7914 (linux_unstop_all_lwps): Declare.
7915 * linux-thread-db.c (struct thread_get_info_inout): Delete.
7916 (thread_get_info_callback): Delete.
7917 (thread_from_lwp): Use td_thr_get_info and record_thread.
7918 (thread_db_attach_lwp): Delete.
7919 (thread_db_notice_clone): New function.
7920 (try_thread_db_load_1): If /proc is mounted and shows the
7921 process'es task list, walk over all LWPs and call thread_from_lwp
7922 instead of relying on td_ta_thr_iter.
7923 (attach_thread): Don't call check_thread_signals here. Split the
7924 tail part of the function (which adds the thread to the core GDB
7926 (record_thread): ... this function. Call check_thread_signals
7928 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
7929 call thread_from_lwp.
7930 (thread_db_update_thread_list): Rename to ...
7931 (thread_db_update_thread_list_org): ... this.
7932 (thread_db_update_thread_list): New function.
7933 (thread_db_find_thread_from_tid): Delete.
7934 (thread_db_get_ada_task_ptid): Simplify.
7935 * nat/linux-procfs.c: Include <sys/stat.h>.
7936 (linux_proc_task_list_dir_exists): New function.
7937 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
7939 2015-02-20 Pedro Alves <palves@redhat.com>
7941 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
7942 main LWP. Handle the case of waitpid returning 0 if we're already
7943 attached to the LWP. Don't set the LWP's last_resume_kind to
7944 resume_stop if we already knew about the LWP.
7945 (linux_nat_filter_event): Add debug logs.
7947 2015-02-20 Pedro Alves <palves@redhat.com>
7949 * target.h (forward_target_decr_pc_after_break): Delete
7952 2015-02-20 Pedro Alves <palves@redhat.com>
7955 * linux-thread-db.c (thread_get_info_callback): Return early if
7956 the thread's lwp id is -1.
7958 2015-02-20 Joel Brobecker <brobecker@adacore.com>
7962 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
7964 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
7965 (dtrace_get_probes) Change type of variable 'dof'.
7967 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
7969 PR breakpoints/16812
7970 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
7971 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
7972 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
7974 2015-02-19 David Taylor <dtaylor@emc.com>
7976 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
7978 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
7980 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
7982 (tui_putc): Don't call tui_handle_resize_during_io.
7983 (tui_getc): Likewise.
7984 (tui_mld_getc): Likewise.
7985 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
7986 (tui_sigwinch_token): New static variable.
7987 (tui_initialize_win): Adjust documentation. Set
7989 (tui_async_resize_screen): New asynchronous callback.
7990 (tui_sigwinch_handler): Adjust documentation. Asynchronously
7991 invoke tui_async_resize_screen.
7993 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
7995 * configure: Regenerated.
7996 * configure.ac: Use GDB_AC_TRANSFORM.
7997 * Makefile.in (aclocal_m4_deps): Added transform.m4.
7998 * acinclude.m4: sinclude transform.m4.
7999 * transform.m4: New file.
8000 (GDB_AC_TRANSFORM): New macro.
8002 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8004 * NEWS: Announce the support for DTrace SDT probes.
8006 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8008 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
8009 (amd64_dtrace_parse_probe_argument): New function.
8010 (amd64_dtrace_probe_is_enabled): Likewise.
8011 (amd64_dtrace_enable_probe): Likewise.
8012 (amd64_dtrace_disable_probe): Likewise.
8013 (amd64_linux_init_abi): Register the
8014 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
8015 `gdbarch_dtrace_disable_probe' and
8016 `gdbarch_dtrace_probe_is_enabled' hooks.
8017 (amd64_dtrace_disabled_probe_sequence_1): New constant.
8018 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
8019 (amd64_dtrace_enable_probe_sequence): Likewise.
8020 (amd64_dtrace_disable_probe_sequence): Likewise.
8022 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8024 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
8025 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
8026 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
8028 * Makefile.in (SFILES): dtrace-probe.c added.
8029 * configure: Regenerate.
8030 * dtrace-probe.c: New file.
8031 (SHT_SUNW_dof): New constant.
8032 (dtrace_probe_type): New enum.
8033 (dtrace_probe_arg): New struct.
8034 (dtrace_probe_arg_s): New typedef.
8035 (struct dtrace_probe_enabler): New struct.
8036 (dtrace_probe_enabler_s): New typedef.
8037 (dtrace_probe): New struct.
8038 (dtrace_probe_is_linespec): New function.
8039 (dtrace_dof_sect_type): New enum.
8040 (dtrace_dof_dofh_ident): Likewise.
8041 (dtrace_dof_encoding): Likewise.
8042 (DTRACE_DOF_ENCODE_LSB): Likewise.
8043 (DTRACE_DOF_ENCODE_MSB): Likewise.
8044 (dtrace_dof_hdr): New struct.
8045 (dtrace_dof_sect): Likewise.
8046 (dtrace_dof_provider): Likewise.
8047 (dtrace_dof_probe): Likewise.
8048 (DOF_UINT): New macro.
8049 (DTRACE_DOF_PTR): Likewise.
8050 (DTRACE_DOF_SECT): Likewise.
8051 (dtrace_process_dof_probe): New function.
8052 (dtrace_process_dof): Likewise.
8053 (dtrace_build_arg_exprs): Likewise.
8054 (dtrace_get_arg): Likewise.
8055 (dtrace_get_probes): Likewise.
8056 (dtrace_get_probe_argument_count): Likewise.
8057 (dtrace_can_evaluate_probe_arguments): Likewise.
8058 (dtrace_evaluate_probe_argument): Likewise.
8059 (dtrace_compile_to_ax): Likewise.
8060 (dtrace_probe_destroy): Likewise.
8061 (dtrace_gen_info_probes_table_header): Likewise.
8062 (dtrace_gen_info_probes_table_values): Likewise.
8063 (dtrace_probe_is_enabled): Likewise.
8064 (dtrace_probe_ops): New variable.
8065 (info_probes_dtrace_command): New function.
8066 (_initialize_dtrace_probe): Likewise.
8067 (dtrace_type_name): Likewise.
8069 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8071 * gdbarch.sh (dtrace_parse_probe_argument): New.
8072 (dtrace_probe_is_enabled): Likewise.
8073 (dtrace_enable_probe): Likewise.
8074 (dtrace_disable_probe): Likewise.
8075 * gdbarch.c: Regenerate.
8076 * gdbarch.h: Regenerate.
8078 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8080 * stap-probe.c (stap_probe_ops): Add NULLs in the static
8081 stap_probe_ops for `enable_probe' and `disable_probe'.
8082 * probe.c (enable_probes_command): New function.
8083 (disable_probes_command): Likewise.
8084 (_initialize_probe): Define the cli commands `enable probe' and
8086 (parse_probe_linespec): New function.
8087 (info_probes_for_ops): Use parse_probe_linespec.
8088 * probe.h (probe_ops): New hooks `enable_probe' and
8091 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8093 * probe.c (compute_probe_arg): Moved from stap-probe.c
8094 (compile_probe_arg): Likewise.
8095 (probe_funcs): Likewise.
8096 * stap-probe.c (compute_probe_arg): Moved to probe.c.
8097 (compile_probe_arg): Likewise.
8098 (probe_funcs): Likewise.
8100 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8102 * probe.c (print_ui_out_not_applicables): New function.
8103 (exists_probe_with_pops): Likewise.
8104 (info_probes_for_ops): Do not include column headers for probe
8105 types for which no probe has been actually found on any object.
8106 Also invoke `print_ui_out_not_applicables' in order to match the
8107 column rows with the header when probes of several types are
8109 Print the "Type" column.
8110 * probe.h (probe_ops): Added a new probe operation `type_name'.
8111 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
8112 (stap_type_name): New function.
8114 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
8116 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
8117 (key_is_command_char): Delete.
8119 2015-02-17 Pedro Alves <palves@redhat.com>
8121 * tui/tui.c (tui_enable): Resize windows before anything
8122 might show a window.
8124 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
8127 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
8128 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
8130 * aarch64-tdep.h (tdesc_aarch64): Declare.
8132 2015-02-12 Mark Wielaard <mjw@redhat.com>
8134 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
8136 2015-02-13 Doug Evans <dje@google.com>
8138 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
8139 anonymous_namespace to is_in_anonymous for consistency with the rest
8141 (cp_lookup_bare_symbol): Fix typo in comment.
8142 (cp_search_static_and_baseclasses): Ditto.
8143 (search_symbol_list): Use vertical space in comment better.
8144 (reset_directive_searched): Ditto. Fix typo.
8145 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
8147 2015-02-13 Yao Qi <yao.qi@arm.com>
8149 * MAINTAINERS: Update my email address.
8151 2015-02-12 Doug Evans <dje@google.com>
8153 * symtab.c (completion_list_add_name): Fix memory leak.
8155 2015-02-12 Doug Evans <dje@google.com>
8157 * completer.c (complete_line): Remove incorrect comment.
8159 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8161 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
8162 (py_print_frame): Use RETURN_MASK_ERROR.
8164 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8166 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
8167 function comment. Wrap all function that can throw in cleanups.
8168 (gdbpy_apply_frame_filter): Wrap all function that can throw in
8171 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8173 * python/py-framefilter.c (py_print_frame): Substitute goto error.
8174 Remove the error label.
8176 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8178 * python/py-framefilter.c (py_print_frame): Put conditional code paths
8179 with goto first, indent the former else codepath left. Put variable
8180 'elided' to a new inner block.
8182 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8184 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
8186 2015-02-11 Pedro Alves <palves@redhat.com>
8188 * xcoffread.c (within_function): Delete.
8190 2015-02-11 Tom Tromey <tromey@redhat.com>
8191 Pedro Alves <palves@redhat.com>
8193 * breakpoint.c (base_breakpoint_ops): Delete.
8194 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
8195 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
8196 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
8197 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
8198 * python/py-arch.c (arch_object_type): Make extern.
8199 * python/py-block.c (block_syms_iterator_object_type): Make extern.
8200 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
8201 * python/py-cmd.c (cmdpy_object_type): Make extern.
8202 * python/py-continueevent.c (continue_event_object_type)
8203 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
8204 parameter. Update all callers.
8205 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
8206 * python/py-exitedevent.c (exited_event_object_type): Make extern.
8207 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
8208 * python/py-function.c (fnpy_object_type): Make extern.
8209 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
8210 * python/py-infevents.c (call_pre_event_object_type)
8211 (inferior_call_post_event_object_type).
8212 (memory_changed_event_object_type): Make extern.
8213 * python/py-infthread.c (thread_object_type): Make extern.
8214 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
8215 * python/py-linetable.c (linetable_entry_object_type)
8216 (linetable_object_type, ltpy_iterator_object_type): Make extern.
8217 * python/py-newobjfileevent.c (new_objfile_event_object_type)
8218 (clear_objfiles_event_object_type): Make extern.
8219 * python/py-objfile.c (objfile_object_type): Make extern.
8220 * python/py-param.c (parmpy_object_type): Make extern.
8221 * python/py-progspace.c (pspace_object_type): Make extern.
8222 * python/py-signalevent.c (signal_event_object_type): Make extern.
8223 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
8224 * python/py-type.c (type_object_type, field_object_type)
8225 (type_iterator_object_type): Make extern.
8226 * python/python.c (python_extension_script_ops)
8227 (python_extension_ops): Make extern.
8228 * stap-probe.c (stap_probe_ops): Make extern.
8230 2015-02-11 Pedro Alves <pedro@codesourcery.com>
8232 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
8233 because the event thread is not the current thread.
8235 2015-02-11 Doug Evans <xdje42@gmail.com>
8237 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
8238 been initialized yet, return NULL.
8240 2015-02-11 Doug Evans <dje@google.com>
8242 * symfile.h (new_symfile_objfile): Delete.
8243 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
8244 All callers updated.
8246 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
8248 * tui/tui-io.c (tui_handle_resize_during_io): Call
8249 tui_update_gdb_sizes() after resizing the screen.
8250 * tui/tui.c (tui_enable): Resize the terminal before
8251 calling tui_update_gdb_sizes().
8253 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
8255 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
8256 line before printing a newline.
8258 2015-02-11 Mark Wielaard <mjw@redhat.com>
8260 * utils.c (producer_is_gcc): Return true or false.
8262 2015-02-10 Mark Wielaard <mjw@redhat.com>
8264 * utils.h (producer_is_gcc): Change return type to bool. Add major
8266 * utils.c (producer_is_gcc): Likewise.
8267 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
8268 * dwarf2read.c (check_producer): Likewise.
8270 2015-02-10 Pedro Alves <palves@redhat.com>
8272 * infrun.c (displaced_step_fixup): Switch to the event thread
8273 before calling gdbarch_displaced_step_fixup.
8275 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
8277 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
8279 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
8281 * ada-varobj.c (ada_name_of_child): Constify parent.
8282 (ada_path_expr_of_child): Same.
8283 (ada_value_of_child): Same.
8284 (ada_type_of_child): Same.
8285 * c-varobj.c (c_is_path_expr_parent): Same.
8286 (c_describe_child): Same.
8287 (c_name_of_child): Same.
8288 (c_value_of_child): Same.
8289 (c_type_of_child): Same.
8290 (cplus_number_of_children): Same.
8291 (cplus_describe_child): Constify var.
8292 (cplus_name_of_child): Constify parent.
8293 (cplus_value_of_child): Same.
8294 (cplus_type_of_child): Same.
8295 * jv-varobj.c (java_name_of_child): Same.
8296 (java_value_of_child): Same.
8297 (java_type_of_child): Same.
8298 * varobj.c (value_of_child): Same.
8299 (varobj_default_is_path_expr_parent): Constify var, parent and return
8301 (varobj_get_path_expr): Constify var, modify path_expr through
8303 (install_new_value): Constify parent.
8304 (value_of_child): Constify parent.
8305 * varobj.h (struct varobj): Constify parent.
8306 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
8308 (varobj_get_path_expr): Constify var.
8309 (varobj_get_path_expr_parent): Constify var and return value.
8311 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
8313 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
8314 (arm_prologue_this_id): Move PC and SP limit checks to
8315 arm_prologue_unwind_stop_reason.
8316 (arm_prologue_unwind) <stop_reason> : Set to
8317 arm_prologue_unwind_stop_reason.
8319 2015-02-09 Mark Wielaard <mjw@redhat.com>
8321 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
8322 DW_LANG_Fortran08 as language_fortran.
8324 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
8327 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
8328 of pointer against char.
8330 2015-02-09 Mark Wielaard <mjw@redhat.com>
8332 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
8333 (c_type_print_modifier): Likewise.
8334 * dwarf2read.c (read_tag_atomic_type): New function.
8335 (read_type_die_1): Handle DW_TAG_atomic_type.
8336 * gdbtypes.c (make_atomic_type): New function.
8337 (recursive_dump_type): Handle TYPE_ATOMIC.
8338 * gdbtypes.h (enum type_flag_values): Renumber.
8339 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
8340 (TYPE_ATOMIC): New macro.
8341 (make_atomic_type): Declare.
8343 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8345 * btrace.c (ftrace_find_call): Skip gaps.
8346 (ftrace_new_function): Initialize level.
8347 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
8348 (ftrace_new_switch): Update
8350 (ftrace_new_gap): New.
8351 (ftrace_update_function): Create new function after gap.
8352 (btrace_compute_ftrace_bts): Create gap on error.
8353 (btrace_stitch_bts): Update parameters. Clear trace if it
8355 (btrace_stitch_trace): Update parameters. Update callers.
8356 (btrace_clear): Reset the number of gaps.
8357 (btrace_insn_get): Return NULL if the iterator points to a gap.
8358 (btrace_insn_number): Return zero if the iterator points to a gap.
8359 (btrace_insn_end): Allow gaps at the end.
8360 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
8361 (btrace_find_insn_by_number): Assert that the found iterator does
8363 (btrace_call_next, btrace_call_prev): Assert that the last function
8365 * btrace.h (btrace_bts_error): New.
8366 (btrace_function): Update comment.
8367 (btrace_function) <insn, insn_offset, number>: Update comment.
8368 (btrace_function) <errcode>: New.
8369 (btrace_thread_info) <ngaps>: New.
8370 (btrace_thread_info) <replay>: Update comment.
8371 (btrace_insn_get): Update comment.
8372 * record-btrace.c (btrace_ui_out_decode_error): New.
8373 (record_btrace_info): Print number of gaps.
8374 (btrace_insn_history, btrace_call_history): Call
8375 btrace_ui_out_decode_error for gaps.
8376 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
8378 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8380 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
8381 * nat/linux-btrace.c: (btrace_this_cpu): New.
8382 (cpu_supports_bts): Call btrace_this_cpu.
8383 (intel_supports_bts): Add cpu parameter.
8385 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8387 * btrace.h (btrace_insn_class): New.
8388 (btrace_insn) <size, iclass>: New.
8389 * btrace.c (ftrace_find_call): Update parameters. Update users.
8390 Use instruction classification.
8391 (ftrace_new_return): Update parameters. Update users.
8392 (ftrace_update_function): Update parameters. Update users. Use
8393 instruction classification.
8394 (ftrace_update_insns): Update parameters. Update users.
8395 (ftrace_classify_insn): New.
8396 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
8397 TRY_CATCH around call to gdb_insn_length.
8399 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8401 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
8402 Update parameters. Update users.
8404 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8406 * btrace.c (parse_xml_btrace_conf_bts): Add size.
8407 (btrace_conf_bts_attributes): New.
8408 (btrace_conf_children): Add attributes.
8409 * common/btrace-common.h (btrace_config_bts): New.
8410 (btrace_config)<bts>: New.
8411 (btrace_config): Update comment.
8412 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
8414 * features/btrace-conf.dtd: Increment version. Add size
8415 attribute to bts element.
8416 * record-btrace.c (set_record_btrace_bts_cmdlist,
8417 show_record_btrace_bts_cmdlist): New.
8418 (record_btrace_adjust_size, record_btrace_print_bts_conf,
8419 record_btrace_print_conf, cmd_set_record_btrace_bts,
8420 cmd_show_record_btrace_bts): New.
8421 (record_btrace_info): Call record_btrace_print_conf.
8422 (_initialize_record_btrace): Add commands.
8423 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
8424 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
8425 (btrace_sync_conf): Synchronize bts size.
8426 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
8427 * NEWS: Announce new commands and new packets.
8429 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8431 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
8432 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
8433 (x86_linux_btrace_conf): New.
8434 (x86_linux_create_target): Initialize to_btrace_conf.
8435 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
8436 Check format. Split into this and ...
8437 (linux_enable_bts): ... this.
8438 (linux_btrace_conf): New.
8439 (perf_event_skip_record): Renamed into ...
8440 (perf_event_skip_bts_record): ... this. Updated users.
8441 (linux_disable_btrace): Split into this and ...
8442 (linux_disable_bts): ... this.
8443 (linux_read_btrace): Check format.
8444 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
8445 (linux_btrace_conf): New.
8446 (btrace_target_info)<ptid>: Moved.
8447 (btrace_target_info)<conf>: New.
8448 (btrace_target_info): Split into this and ...
8449 (btrace_tinfo_bts): ... this. Updated users.
8450 * btrace.c (btrace_enable): Update parameters.
8451 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
8452 (btrace_conf_children, btrace_conf_attributes)
8453 (btrace_conf_elements): New.
8454 * btrace.h (btrace_enable): Update parameters.
8455 (btrace_conf, parse_xml_btrace_conf): New.
8456 * common/btrace-common.h (btrace_config): New.
8457 * feature/btrace-conf.dtd: New.
8458 * record-btrace.c (record_btrace_conf): New.
8459 (record_btrace_cmdlist): New.
8460 (record_btrace_enable_warn, record_btrace_open): Pass
8461 &record_btrace_conf.
8462 (record_btrace_info): Print recording format.
8463 (cmd_record_btrace_bts_start): New.
8464 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
8465 (_initialize_record_btrace): Add "record btrace bts" subcommand.
8466 Add "record bts" alias command.
8467 * remote.c (remote_state)<btrace_config>: New.
8468 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
8469 (remote_protocol_features): Add qXfer:btrace-conf:read.
8470 (remote_open_1): Call remote_btrace_reset.
8471 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
8472 (btrace_target_info)<conf>: New.
8473 (btrace_sync_conf, btrace_read_config): New.
8474 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
8476 (remote_btrace_conf): New.
8477 (init_remote_ops): Initialize to_btrace_conf.
8478 (_initialize_remote): Add qXfer:btrace-conf packet.
8479 * target.c (target_enable_btrace): Update parameters.
8480 (target_btrace_conf): New.
8481 * target.h (target_enable_btrace): Update parameters.
8482 (target_btrace_conf): New.
8483 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
8484 (target_ops)<to_enable_btrace>: Update parameters and comment.
8485 (target_ops)<to_btrace_conf>: New.
8486 * target-delegates: Regenerate.
8487 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
8488 (target_debug_print_const_struct_btrace_target_info_p): New.
8489 * NEWS: Announce new command and new packet.
8491 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8493 * nat/linux-btrace.h (perf_event_buffer): New.
8494 (btrace_target_info) <buffer, size, data_head>: Replace with ...
8496 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
8497 (perf_event_buffer_size, perf_event_buffer_begin)
8498 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
8500 (perf_event_new_data): New.
8502 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8504 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
8505 * record-btrace.c (record_btrace_open): Remove call to
8506 target_supports_btrace.
8507 * remote.c (remote_supports_btrace): Update parameters.
8508 * target.c (target_supports_btrace): Update parameters.
8509 * target.h (to_supports_btrace, target_supports_btrace): Update
8511 * target-delegates.c: Regenerate.
8512 * target-debug.h (target_debug_print_enum_btrace_format): New.
8513 * nat/linux-btrace.c
8514 (kernel_supports_btrace): Rename into ...
8515 (kernel_supports_bts): ... this. Update users. Update warning text.
8516 (intel_supports_btrace): Rename into ...
8517 (intel_supports_bts): ... this. Update users.
8518 (cpu_supports_btrace): Rename into ...
8519 (cpu_supports_bts): ... this. Update users.
8520 (linux_supports_btrace): Update parameters. Split into this and ...
8521 (linux_supports_bts): ... this.
8522 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
8524 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8526 * Makefile.in (SFILES): Add common/btrace-common.c.
8527 (COMMON_OBS): Add common/btrace-common.o.
8528 (btrace-common.o): Add build rules.
8529 * btrace.c (parse_xml_btrace): Update parameters.
8530 (parse_xml_btrace_block): Set format field.
8531 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
8532 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
8533 (btrace_compute_ftrace): Split into this and...
8534 (btrace_compute_ftrace_bts): ...this.
8535 (btrace_stitch_trace): Split into this and...
8536 (btrace_stitch_bts): ...this.
8537 * btrace.h (parse_xml_btrace): Update parameters.
8538 (make_cleanup_btrace_data): New.
8539 * common/btrace-common.c: New.
8540 * common/btrace-common.h: Include common-defs.h.
8541 (btrace_block_s): Update comment.
8542 (btrace_format): New.
8543 (btrace_format_string): New.
8544 (btrace_data_bts): New.
8546 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
8547 * remote.c (remote_read_btrace): Update parameters.
8548 * target.c (target_read_btrace): Update parameters.
8549 * target.h (target_read_btrace): Update parameters.
8550 (target_ops)<to_read_btrace>: Update parameters.
8551 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
8552 * target-delegates.c: Regenerate.
8553 * target-debug (target_debug_print_struct_btrace_data_p): New.
8554 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
8555 (linux_read_bts): ...this.
8556 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
8558 2015-02-06 Doug Evans <dje@google.com>
8560 * remote-m32r-sdi.c: Include symfile.h.
8562 2015-02-06 Doug Evans <dje@google.com>
8564 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
8565 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
8568 2015-02-06 Pedro Alves <palves@redhat.com>
8570 * linux-thread-db.c (find_new_threads_callback): Add debug output.
8572 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
8575 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
8576 (enable_count_command): Check args for NULL value.
8578 2015-02-05 Doug Evans <xdje42@gmail.com>
8580 * guile/scm-frame.c: Fix spelling errors in a comment.
8582 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
8584 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
8585 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
8588 2015-02-04 Pedro Alves <palves@redhat.com>
8590 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
8591 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
8593 (resume_stopped_resumed_lwps): Don't check whether the thread is
8594 marked as executing.
8595 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
8597 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
8599 * regset.h (struct regset): Add flags field.
8600 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
8601 * corelow.c (get_core_register_section): Add warning if the size
8602 exceeds the requested size and the regset does not have the
8603 REGSET_VARIABLE_SIZE flag set.
8604 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
8606 * armbsd-tdep.c (armbsd_gregset): Likewise.
8607 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
8608 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
8609 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
8610 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
8612 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
8614 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
8615 For ".reg-xstate", explicitly specify the requested section size
8616 via X86_XSTATE_SIZE instead of just 0 on input and
8617 X86_XSTATE_MAX_SIZE on output.
8618 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
8621 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
8624 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
8625 function type, particularly its SIZE parameter.
8626 * gdbarch.h: Regenerate.
8627 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
8628 actual against required size using ">=" instead of "==".
8629 (amd64_collect_fpregset): Likewise.
8630 * i386-tdep.c (i386_supply_gregset): Likewise.
8631 (i386_collect_gregset): Likewise.
8632 (i386_supply_fpregset): Likewise.
8633 (i386_collect_fpregset): Likewise.
8634 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
8635 (mips_fill_gregset_wrapper): Likewise.
8636 (mips_supply_fpregset_wrapper): Likewise.
8637 (mips_fill_fpregset_wrapper): Likewise.
8638 (mips64_supply_gregset_wrapper): Likewise.
8639 (mips64_fill_gregset_wrapper): Likewise.
8640 (mips64_supply_fpregset_wrapper): Likewise.
8641 (mips64_fill_fpregset_wrapper): Likewise.
8642 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
8643 (am33_supply_fpregset_method): Likewise.
8644 (am33_collect_gregset_method): Likewise.
8645 (am33_collect_fpregset_method): Likewise.
8647 2015-02-04 Doug Evans <dje@google.com>
8648 Pedro Alves <palves@redhat.com>
8649 Eli Zaretskii <eliz@gnu.org>
8652 * tui/tui-command.c (tui_refresh_cmd_win): New function.
8653 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
8654 * tui/tui-file.c: #include tui/tui-command.h.
8655 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
8656 (tui_file_flush): Refresh command window if stream is gdb_stdout.
8657 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
8659 2015-02-04 Pedro Alves <palves@redhat.com>
8662 * event-loop.c (gdb_do_one_event): Add default switch case.
8664 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
8666 Filter out inferior gcc option -fpreprocessed.
8667 * compile/compile.c (filter_args): New function.
8670 2015-02-03 Pedro Alves <palves@redhat.com>
8672 * event-loop.c: Don't declare nor define a queue type for
8674 (event_queue): Delete.
8675 (create_event, create_file_event, gdb_event_xfree)
8676 (initialize_event_loop, process_event): Delete.
8677 (gdb_do_one_event): Return as soon as one event is handled.
8678 (handle_file_event): Change prototype. Used the passed in
8679 file_handler pointer and ready_mask instead of looping over all
8681 (gdb_wait_for_event): Update the poll/select timeouts before
8682 blocking. Run event handlers directly instead of queueing events.
8683 Return as soon as one event is handled.
8684 (struct async_event_handler_data): Delete.
8685 (invoke_async_event_handler): Delete.
8686 (check_async_event_handlers): Change return type to int. Run
8687 event handlers directly instead of queueing events. Return as
8688 soon as one event is handled.
8689 (handle_timer_event): Delete.
8690 (update_wait_timeout): New function, factored out from
8692 (poll_timers): Reimplement.
8693 * event-loop.h (initialize_event_loop): Delete declaration.
8694 * top.c (gdb_init): Don't call initialize_event_loop.
8696 2015-02-03 Pedro Alves <palves@redhat.com>
8698 * event-loop.c (clear_async_event_handler): New function.
8699 * event-loop.h (clear_async_event_handler): New declaration.
8700 * record-btrace.c (record_btrace_async): New function.
8701 (init_record_btrace_ops): Install record_btrace_async.
8702 * record-full.c (record_full_async): New function.
8703 (record_full_resume): Don't mark the async event source here.
8704 (init_record_full_ops): Install record_full_async.
8705 (record_full_core_resume): Don't mark the async event source here.
8706 (init_record_full_core_ops): Install record_full_async.
8707 * remote.c (remote_async): Mark and clear the async stop reply
8708 queue event-loop token as appropriate.
8710 2015-02-03 Pedro Alves <palves@redhat.com>
8712 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
8713 target_is_async_p instead of target_can_async.
8714 (linux_nat_wait): Use target_is_async_p instead of
8715 target_can_async. Don't enable async here.
8716 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
8717 target_is_async_p instead of target_can_async.
8719 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
8721 * varobj.h (lang_varobj_ops): Mention which return values need
8724 2015-02-02 Joel Brobecker <brobecker@adacore.com>
8726 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
8728 2015-02-02 Joel Brobecker <brobecker@adacore.com>
8731 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
8732 results found in the cache.
8734 2015-02-02 Joel Brobecker <brobecker@adacore.com>
8737 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
8738 when allocating a new one.
8740 2015-02-01 Tom Tromey <tom@tromey.com>
8742 * MAINTAINERS: Remove myself.
8744 2015-01-31 Doug Evans <xdje42@gmail.com>
8746 * dwarf2read.c (process_structure_scope): Update setting of
8747 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
8748 * gdbtypes.c (internal_type_vptr_fieldno): New function.
8749 (set_type_vptr_fieldno): New function.
8750 (internal_type_vptr_basetype): New function.
8751 (set_type_vptr_basetype): New function.
8752 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
8754 (allocate_cplus_struct_type): Initialize vptr_fieldno.
8755 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
8756 (print_cplus_stuff): ... moved here.
8757 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
8758 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
8760 (struct cplus_struct_type): ... here. All uses updated.
8761 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
8762 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
8763 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
8764 * stabsread.c (read_tilde_fields): Update setting of
8765 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
8767 2015-01-31 Doug Evans <xdje42@gmail.com>
8769 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
8771 (cp_print_class_member): Rename local domain to self_type.
8772 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
8773 domain_type to self_type.
8774 (set_die_type) <need_gnat_info>: Handle
8775 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
8776 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
8777 TYPE_SPECIFIC_SELF_TYPE.
8778 * gdbtypes.c (internal_type_self_type): New function.
8779 (set_type_self_type): New function.
8780 (smash_to_memberptr_type): Rename parameter domain to self_type.
8781 Update setting of TYPE_SELF_TYPE.
8782 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
8783 (smash_to_method_type): Rename parameter domain to self_type.
8784 Update setting of TYPE_SELF_TYPE.
8785 (check_stub_method): Call smash_to_method_type.
8786 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
8787 (copy_type_recursive): Ditto.
8788 * gdbtypes.h (enum type_specific_kind): New value
8789 TYPE_SPECIFIC_SELF_TYPE.
8790 (struct main_type) <type_specific>: New member self_type.
8791 (struct cplus_struct_type) <fn_field.type>: Update comment.
8792 (TYPE_SELF_TYPE): Rewrite.
8793 (internal_type_self_type, set_type_self_type): Declare.
8794 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
8796 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
8797 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
8799 * stabsread.c (read_member_functions): Mark methods with
8800 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
8803 2015-01-31 Doug Evans <xdje42@gmail.com>
8805 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
8808 2015-01-31 Doug Evans <xdje42@gmail.com>
8810 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
8811 or unions. Return zero if union.
8812 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
8813 (gnuv3_rtti_type): Pass already-check_typedef'd value to
8815 (compute_vtable_size): Assert only passed structs.
8816 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
8818 2015-01-31 Doug Evans <xdje42@gmail.com>
8820 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
8823 2015-01-31 Gary Benson <gbenson@redhat.com>
8824 Doug Evans <dje@google.com>
8829 * cli/cli-cmds.c (complete_command): Notify user if max-completions
8831 * common/common-exceptions.h (enum errors)
8832 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
8833 * completer.h (get_max_completions_reached_message): New declaration.
8834 (max_completions): Likewise.
8835 (completion_tracker_t): New typedef.
8836 (new_completion_tracker): New declaration.
8837 (make_cleanup_free_completion_tracker): Likewise.
8838 (maybe_add_completion_enum): New enum.
8839 (maybe_add_completion): New declaration.
8840 (throw_max_completions_reached_error): Likewise.
8841 * completer.c (max_completions): New global variable.
8842 (new_completion_tracker): New function.
8843 (free_completion_tracker): Likewise.
8844 (make_cleanup_free_completion_tracker): Likewise.
8845 (maybe_add_completions): Likewise.
8846 (throw_max_completions_reached_error): Likewise.
8847 (complete_line): Remove duplicates and limit result to max_completions
8849 (get_max_completions_reached_message): New function.
8850 (gdb_display_match_list): Handle max_completions.
8851 (_initialize_completer): New declaration and function.
8852 * symtab.c: Include completer.h.
8853 (completion_tracker): New static variable.
8854 (completion_list_add_name): Call maybe_add_completion.
8855 (default_make_symbol_completion_list_break_on_1): Renamed from
8856 default_make_symbol_completion_list_break_on. Maintain
8857 completion_tracker across calls to completion_list_add_name.
8858 (default_make_symbol_completion_list_break_on): New function.
8859 * top.c (init_main): Set rl_completion_display_matches_hook.
8860 * tui/tui-io.c: Include completer.h.
8861 (tui_old_rl_display_matches_hook): New static global.
8862 (tui_rl_display_match_list): Notify user if max-completions reached.
8863 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
8864 * NEWS (New Options): Mention set/show max-completions.
8866 2015-01-31 Gary Benson <gbenson@redhat.com>
8868 * symtab.c (struct add_name_data) <code>: New field.
8870 (add_symtab_completions): New function.
8871 (symtab_expansion_callback): Likewise.
8872 (default_make_symbol_completion_list_break_on): Set datum.code.
8873 Move minimal symbol scan before calling expand_symtabs_matching.
8874 Scan known primary symtabs for externs and statics before calling
8875 expand_symtabs_matching. Pass symtab_expansion_callback as
8876 expansion_notify argument to expand_symtabs_matching. Do not scan
8877 primary symtabs for externs and statics after calling
8878 expand_symtabs_matching.
8880 2015-01-31 Gary Benson <gbenson@redhat.com>
8882 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
8883 (struct quick_symbol_functions) <expand_symtabs_matching>:
8884 New argument expansion_notify. All uses updated.
8885 (expand_symtabs_matching): New argument expansion_notify.
8887 * symfile-debug.c (debug_qf_expand_symtabs_matching):
8888 Also print expansion notify.
8889 * symtab.c (expand_symtabs_matching_via_partial): Call
8890 expansion_notify whenever a partial symbol table is expanded.
8891 * dwarf2read.c (dw2_expand_symtabs_matching): Call
8892 expansion_notify whenever a symbol table is instantiated.
8894 2015-01-31 Doug Evans <xdje42@gmail.com>
8896 * cli-out.c: #include completer.h, readline/readline.h.
8897 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
8898 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
8899 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
8900 * cli-out.h (cli_display_match_list): Declare.
8901 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
8902 (ELLIPSIS_LEN): Ditto.
8903 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
8904 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
8905 (gdb_fnprint, gdb_print_filename): Ditto.
8906 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
8907 (gdb_display_match_list): Ditto.
8908 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
8909 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
8910 (mld_beep_ftype, mld_read_key_ftype): Ditto.
8911 (match_list_displayer): New struct.
8912 (gdb_display_match_list): Declare.
8913 * top.c (init_main): Set rl_completion_display_matches_hook.
8914 * tui/tui-io.c: #include completer.h.
8915 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
8916 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
8917 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
8918 (tui_mld_getc, tui_mld_read_key): Ditto.
8919 (tui_rl_display_match_list): Rewrite.
8920 (tui_handle_resize_during_io): New arg for_completion. All callers
8923 2015-01-31 Doug Evans <xdje42@gmail.com>
8925 Add symbol lookup cache.
8926 * NEWS: Document new options and commands.
8927 * symtab.c (symbol_cache_key): New static global.
8928 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
8929 (SYMBOL_LOOKUP_FAILED): New macro.
8930 (symbol_cache_slot_state): New enum.
8931 (block_symbol_cache): New struct.
8932 (symbol_cache): New struct.
8933 (new_symbol_cache_size, symbol_cache_size): New static globals.
8934 (hash_symbol_entry, eq_symbol_entry): New functions.
8935 (symbol_cache_byte_size, resize_symbol_cache): New functions.
8936 (make_symbol_cache, free_symbol_cache): New functions.
8937 (get_symbol_cache, symbol_cache_cleanup): New function.
8938 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
8939 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
8940 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
8941 (symbol_cache_flush, symbol_cache_dump): New functions.
8942 (maintenance_print_symbol_cache): New function.
8943 (maintenance_flush_symbol_cache): New function.
8944 (symbol_cache_stats): New function.
8945 (maintenance_print_symbol_cache_statistics): New function.
8946 (symtab_new_objfile_observer): New function.
8947 (symtab_free_objfile_observer): New function.
8948 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
8949 (_initialize_symtab): Init symbol_cache_key. New parameter
8950 maint symbol-cache-size. New maint commands print symbol-cache,
8951 print symbol-cache-statistics, flush-symbol-cache.
8952 Install new_objfile, free_objfile observers.
8954 2015-01-31 Joel Brobecker <brobecker@adacore.com>
8957 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
8960 2015-01-31 Doug Evans <xdje42@gmail.com>
8962 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
8963 * auto-load.c: #include ctype.h.
8964 (struct auto_load_pspace_info): Replace member loaded_scripts with
8965 new members loaded_script_files, loaded_script_texts.
8966 (auto_load_pspace_data_cleanup): Update.
8967 (init_loaded_scripts_info): Update.
8968 (get_auto_load_pspace_data_for_loading): Update.
8969 (maybe_add_script_file): Renamed from maybe_add_script. All callers
8971 (maybe_add_script_text): New function.
8972 (clear_section_scripts): Update.
8973 (source_script_file, execute_script_contents): New functions.
8974 (source_section_scripts): Add support for
8975 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
8976 (print_scripts): New function.
8977 (auto_load_info_scripts): Also print inlined scripts.
8978 (maybe_print_unsupported_script_warning): Renamed from
8979 unsupported_script_warning_print. All callers updated.
8980 (maybe_print_script_not_found_warning): Renamed from
8981 script_not_found_warning_print. All callers updated.
8982 * extension-priv.h (struct extension_language_script_ops): New member
8983 objfile_script_executor.
8984 * extension.c (ext_lang_objfile_script_executor): New function.
8985 * extension.h (objfile_script_executor_func): New typedef.
8986 (ext_lang_objfile_script_executor): Declare.
8987 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
8988 * guile/guile.c (guile_extension_script_ops): Update.
8989 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
8990 * python/python.c (python_extension_script_ops): Update.
8991 (gdbpy_execute_objfile_script): New function.
8993 2015-01-31 Eli Zaretskii <eliz@gnu.org>
8995 * tui/tui-io.c (tui_expand_tabs): New function.
8996 (tui_puts, tui_redisplay_readline): Expand TABs into the
8997 appropriate number of spaces.
8998 * tui/tui-regs.c: Include tui-io.h.
8999 (tui_register_format): Call tui_expand_tabs to expand TABs into
9000 the appropriate number of spaces.
9001 * tui/tui-io.h: Add prototype for tui_expand_tabs.
9003 2015-01-30 Doug Evans <dje@google.com>
9005 * NEWS: "info source" command now display producer string if present.
9006 * source.c (source_info): Print producer string if present.
9008 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9010 * varobj.c (varobj_delete): Fix comment.
9012 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9014 * varobj.c (create_child): Modify comment.
9016 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9018 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
9020 (ada_name_of_variable): Same.
9021 (ada_path_expr_of_child): Same.
9022 (ada_value_of_variable): Same.
9023 (ada_value_is_changeable_p): Same.
9024 (ada_value_has_mutated): Same.
9025 * c-varobj.c (varobj_is_anonymous_child): Same.
9026 (c_is_path_expr_parent): Same.
9027 (c_number_of_children): Same.
9028 (c_name_of_variable): Same.
9029 (c_path_expr_of_child): Same.
9031 (c_value_of_variable): Same.
9032 (cplus_number_of_children): Same.
9033 (cplus_name_of_variable): Same.
9034 (cplus_path_expr_of_child): Same.
9035 (cplus_value_of_variable): Same.
9036 * jv-varobj.c (java_number_of_children): Same.
9037 (java_name_of_variable): Same.
9038 (java_path_expr_of_child): Same.
9039 (java_value_of_variable): Same.
9040 * varobj.c (number_of_children): Same.
9041 (name_of_variable): Same.
9043 (varobj_ensure_python_env): Same.
9044 (varobj_get_objname): Same.
9045 (varobj_get_expression): Same.
9046 (varobj_get_display_format): Same.
9047 (varobj_get_display_hint): Same.
9048 (varobj_has_more): Same.
9049 (varobj_get_thread_id): Same.
9050 (varobj_get_frozen): Same.
9051 (dynamic_varobj_has_child_method): Same.
9052 (varobj_get_gdb_type): Same.
9053 (is_path_expr_parent): Same.
9054 (varobj_default_is_path_expr_parent): Same.
9055 (varobj_get_language): Same.
9056 (varobj_get_attributes): Same.
9057 (varobj_is_dynamic_p): Same.
9058 (varobj_get_child_range): Same.
9059 (varobj_value_has_mutated): Same.
9060 (varobj_get_value_type): Same.
9061 (number_of_children): Same.
9062 (name_of_variable): Same.
9063 (check_scope): Same.
9064 (varobj_editable_p): Same.
9065 (varobj_value_is_changeable_p): Same.
9066 (varobj_floating_p): Same.
9067 (varobj_default_value_is_changeable_p): Same.
9069 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9071 * varobj.c (varobj_get_path_expr): Set var->path_expr.
9072 * c-varobj.c (c_path_expr_of_child): Set local var instead of
9074 (cplus_path_expr_of_child): Same.
9076 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9078 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
9080 (mi_cmd_var_info_expression): Same.
9081 * varobj.c (varobj_get_expression): Mention in the comment that
9082 the result must by freed by the caller.
9084 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9086 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
9088 (varobj_update_one): Same.
9089 * varobj.c (update_type_if_necessary): Free curr_type_str and
9091 (varobj_get_type): Specify in comment that the result needs to be
9092 freed by the caller.
9094 2015-01-29 Doug Evans <dje@google.com>
9097 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
9099 2015-01-25 Mark Wielaard <mjw@redhat.com>
9101 * dwarf2read.c (checkproducer): Call producer_is_gcc.
9102 * utils.c (producer_is_gcc_ge_4): Likewise.
9103 (producer_is_gcc): New function.
9104 * utils.h (producer_is_gcc): New declaration.
9106 2015-01-29 Joel Brobecker <brobecker@adacore.com>
9108 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
9110 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
9111 parameter by "addr_stack" parameter.
9112 (resolve_dynamic_range): Replace "addr" parameter by
9113 "stack_addr" parameter. Update function documentation.
9114 Update code accordingly.
9115 (resolve_dynamic_array, resolve_dynamic_union)
9116 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
9117 (resolve_dynamic_type): Update code, following the changes made
9118 to resolve_dynamic_type_internal's interface.
9119 * dwarf2loc.h (struct property_addr_info): New.
9120 (dwarf2_evaluate_property): Replace "address" parameter
9121 by "addr_stack" parameter. Adjust function documentation.
9122 (struct dwarf2_offset_baton): New.
9123 (struct dwarf2_property_baton): Update documentation of
9124 field "referenced_type" to be more general. New field
9125 "offset_info" in union data field.
9126 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
9127 parameter by "addr_stack" parameter. Adjust code accordingly.
9128 Add support for PROP_ADDR_OFFSET properties.
9129 * dwarf2read.c (attr_to_dynamic_prop): Add support for
9130 DW_AT_data_member_location attributes as well. Use case
9131 statements instead of if/else condition.
9133 2015-01-29 Joel Brobecker <brobecker@adacore.com>
9135 * ada-varobj.c (ada_varobj_get_array_number_of_children):
9136 Return zero if PARENT_VALUE is NULL and parent_type's
9137 range type is dynamic.
9139 2015-01-29 Joel Brobecker <brobecker@adacore.com>
9141 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
9142 nonzero if the type's subtype is dynamic.
9143 (resolve_dynamic_range): Also resolve the range's subtype.
9145 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
9147 Pushed by Joel Brobecker <brobecker@adacore.com>.
9148 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
9150 2015-01-27 Doug Evans <dje@google.com>
9152 * NEWS: Mention gdb.Objfile.username.
9153 * python/py-objfile.c (objfpy_get_username): New function.
9154 (objfile_getset): Add "username".
9156 2015-01-24 Mark Wielaard <mjw@redhat.com>
9158 * stack.c (return_command): Markup warning message with _.
9160 2015-01-24 Doug Evans <xdje42@gmail.com>
9162 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
9164 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
9166 Fix 100x slowdown regression on DWZ files.
9167 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
9168 (struct line_header): Add offset and offset_in_dwz.
9169 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
9170 (free_line_header_voidp): New declaration.
9171 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
9173 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
9174 (handle_DW_AT_stmt_list): Use line_header_hash.
9175 (free_line_header_voidp): New function.
9176 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
9177 (dwarf_decode_lines): New parameter decode_mapping, use it.
9178 (dwarf2_free_objfile): Free line_header_hash.
9180 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
9183 * valops.c (value_rtti_indirect_type): Catch exception thrown by
9186 2015-01-15 Mark Wielaard <mjw@redhat.com>
9188 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
9190 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
9191 calling_convention an 8 bit bit field.
9192 (TYPE_NO_RETURN): New macro.
9193 * infcmd.c (finish_command): Query if function does not return
9195 * stack.c (return_command): Likewise.
9197 2015-01-23 Pedro Alves <palves@redhat.com>
9199 * linux-nat.c (linux_is_async_p): New macro.
9200 (linux_nat_is_async_p):
9201 (linux_nat_terminal_inferior): Check whether the target can async
9202 instead of whether it is already async.
9203 (linux_nat_terminal_ours): Don't check whether the target is
9205 (linux_async_pipe): Use linux_is_async_p.
9207 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9209 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
9211 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
9212 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
9213 Sort tp_array using tp_array_compar.
9214 (_initialize_thread): Extend thread_apply_all_command help.
9216 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9218 * corelow.c (core_open): Call also thread_command.
9219 * gdbthread.h (thread_command): New prototype moved from ...
9220 * thread.c (thread_command): ... here.
9221 (thread_command): Make it global.
9223 2015-01-22 Pedro Alves <palves@redhat.com>
9225 * configure.ac [*mingw32*]: Check $curses_found instead of
9227 * configure: Regenerate.
9228 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
9229 HAVE_NCURSES_NCURSES_H checks.
9231 2015-01-22 Eli Zaretskii <eliz@gnu.org>
9233 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
9234 fails with the 1st arg NULL, try again with "unknown". Don't test
9235 the "cup" capability: it isn't supported by the Windows port of
9236 ncurses, but the Windows console driver is still capable of
9239 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9241 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
9243 2015-01-22 Eli Zaretskii <eliz@gnu.org>
9245 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
9246 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
9247 reason that "make TAGS" is broken.
9249 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
9251 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
9252 and check additional store instructions.
9254 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
9256 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
9258 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
9260 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
9261 ppc_canonicalize_syscall, ppc_linux_syscall_record,
9262 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
9263 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
9264 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
9265 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
9266 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
9267 ppc_process_record_op19, ppc_process_record_op31,
9268 ppc_process_record_op59, ppc_process_record_op60,
9269 ppc_process_record_op63): Likewise.
9271 2015-01-20 Joel Brobecker <brobecker@adacore.com>
9273 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
9274 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
9277 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
9279 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
9280 ppc_process_record_op31, ppc_process_record_op59,
9281 ppc_process_record_op60, ppc_process_record_op63,
9282 ppc_process_record): Fix -Wformat warning.
9283 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
9284 Remove unused variables.
9286 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
9288 * MAINTAINERS (Write After Approval): Add "Chen Gang".
9290 2015-01-19 Eli Zaretskii <eliz@gnu.org>
9292 * configure.ac [*mingw32*]: Only add windows-termcap.o to
9293 CONFIG_OBS if not building with a curses library.
9294 * configure: Regenerate.
9296 * windows-termcap.c: Include defs.h. Make the whole body empty if
9297 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
9298 HAVE_NCURSES_NCURSES_H is defined.
9300 2015-01-19 Joel Brobecker <brobecker@adacore.com>
9302 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
9303 from end of line to start of next line.
9305 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
9307 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
9308 Scan PLT stub backward for reverse debugging.
9309 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
9311 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
9312 Ulrich Weigand <uweigand@de.ibm.com>
9314 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
9316 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
9318 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
9319 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
9320 (ppc_linux_init_abi): Set process_record, process_record_signal.
9321 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
9322 ppc_linux_record_tdep to gdbarch_tdep.
9323 (ppc_process_record): New declaration.
9324 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
9325 ppc_process_record_op19, ppc_process_record_op31,
9326 ppc_process_record_op59, ppc_process_record_op60,
9327 ppc_process_record_op63, ppc_process_record): New functions.
9329 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
9331 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
9332 rs6000_in_function_epilogue_frame_p and add an argument
9334 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
9335 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
9337 (rs6000_epilogue_frame_unwind): New.
9338 (rs6000_gdbarch_init): Append epilogue unwinder.
9340 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
9342 * nat/linux-personality.c: Replace "#ifndef
9343 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
9344 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
9347 2015-01-16 Eli Zaretskii <eliz@gnu.org>
9349 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
9351 (_initialize_tui_win) <border-kind, border-mode>:
9352 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
9353 (tui_set_tab_width_command): Fix the commentary.
9355 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
9357 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
9359 (tui_set_tab_width_command): Delete and recreate the source and
9360 the disassembly windows, to show the effect of the changed tab
9363 * tui/tui-data.h (LINE_PREFIX): Make shorter
9364 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
9365 "Thread NNNNN.XXXX" thread ID notation on Windows.
9367 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
9369 Fix gcc-5 compilation.
9370 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
9372 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
9374 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
9375 (linux-personality.o): New rule.
9376 * common/common-defs.h: Include <stdint.h>.
9377 * config/aarch64/linux.mh (NATDEPFILES): Include
9378 linux-personality.o.
9379 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
9380 * config/arm/linux.mh (NATDEPFILES): Likewise.
9381 * config/i386/linux64.mh (NATDEPFILES): Likewise.
9382 * config/i386/linux.mh (NATDEPFILES): Likewise.
9383 * config/ia64/linux.mh (NATDEPFILES): Likewise.
9384 * config/m32r/linux.mh (NATDEPFILES): Likewise.
9385 * config/m68k/linux.mh (NATDEPFILES): Likewise.
9386 * config/mips/linux.mh (NATDEPFILES): Likewise.
9387 * config/pa/linux.mh (NATDEPFILES): Likewise.
9388 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
9389 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
9390 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
9391 * config/s390/linux.mh (NATDEPFILES): Likewise.
9392 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
9393 * config/sparc/linux.mh (NATDEPFILES): Likewise.
9394 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
9395 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
9396 * defs.h: Remove #include <stdint.h> (moved to
9397 common/common-defs.h).
9398 * linux-nat.c: Include nat/linux-personality.h. Remove #include
9399 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
9400 nat/linux-personality.c).
9401 (linux_nat_create_inferior): Remove code to disable address space
9402 randomization (moved to nat/linux-personality.c). Create cleanup
9403 to disable address space randomization.
9404 * nat/linux-personality.c: New file.
9405 * nat/linux-personality.h: Likewise.
9407 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
9409 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
9410 common/posix-strerror.c.
9411 (posix-strerror.o): New rule.
9412 (mingw-strerror.o): Likewise.
9413 * common/common-utils.h (safe_strerror): Move prototype to here,
9415 * common/common.host: New file.
9416 * common/mingw-strerror.c: Likewise.
9417 * common/posix-strerror.c: Likewise.
9418 * configure: Regenerated.
9419 * configure.ac: Source common/common.host. Add variable
9420 common_host_obs to gdb_host_obs.
9421 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
9422 gdb/common/posix-strerror.c when warning about the use of
9424 * mingw-hdep.c (safe_strerror): Remove definition; move it to
9425 common/mingw-strerror.c.
9426 * posix-hdep.c (safe_strerror): Remove definition; move it to
9427 common/posix-hdep.c.
9428 * utils.h (safe_strerror): Remove prototype; move to
9429 common/common-utils.h.
9431 2015-01-15 Joel Brobecker <brobecker@adacore.com>
9435 2015-01-15 Joel Brobecker <brobecker@adacore.com>
9437 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
9438 ___XA type if the array has already been fixed.
9440 2015-01-14 Yao Qi <yao@codesourcery.com>
9442 * Makefile.in (ppc-linux.o): New rule.
9443 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
9444 * configure.ac: AC_CHECK_FUNCS(getauxval).
9445 * config.in: Re-generated.
9446 * configure: Re-generated.
9447 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
9449 * nat/ppc-linux.c: New file.
9450 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
9451 Call ppc64_64bit_inferior_p.
9453 2015-01-14 Yao Qi <yao@codesourcery.com>
9455 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
9457 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
9458 (PPC_FEATURE_HAS_DFP): Likewise.
9459 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
9460 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
9461 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
9462 Include "nat/ppc-linux.h".
9463 * nat/ppc-linux.h: New file.
9464 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
9466 2015-01-14 Pedro Alves <palves@redhat.com>
9469 * breakpoint.c: Include "interps.h".
9470 (bpstat_do_actions_1): Also check whether the interpreter is
9473 2015-01-14 Pedro Alves <palves@redhat.com>
9476 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
9477 reinstall if the interpreter is sync.
9479 2015-01-13 Doug Evans <dje@google.com>
9481 * objfiles.c (objfile_filename): New function.
9482 * objfiles.h (objfile_filename): Declare it.
9483 (objfile_name): Add function comment.
9484 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
9485 bfd file name (which may be realpath'd), and the original name.
9487 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9489 * NEWS: Create a new section for the next release branch.
9490 Rename the section of the current branch, now that it has
9493 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9495 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
9496 * version.in: Bump version to 7.9.50.DATE-cvs.
9498 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9500 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
9501 Remove trailing new-line in argument of call to warning.
9503 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9505 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
9506 new-line in argument of call to "warning".
9508 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9510 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
9511 in static block, then try searching for primitive types.
9513 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
9515 * top.h (gdb_add_history): Declare.
9516 * top.c (command_count): New variable.
9517 (gdb_add_history): New function.
9518 (gdb_safe_append_history): New static function.
9519 (quit_force): Call it.
9520 (command_line_input): Use gdb_add_history instead of
9522 * event-top.c (command_line_handler): Likewise.
9524 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
9527 * darwin-nat.c: Replace <machine/setjmp.h> #include by
9528 <setjmp.h> #include.
9530 2015-01-11 Doug Evans <xdje42@gmail.com>
9532 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
9534 2015-01-11 Doug Evans <xdje42@gmail.com>
9537 * NEWS: The "maint demangle" command is renamed as "demangle".
9538 * demangle.c: #include cli/cli-utils.h, language.h.
9539 (demangle_command): New function.
9540 (_initialize_demangle): Add new command "demangle".
9541 * maint.c (maintenance_demangle): Stub out.
9542 (_initialize_maint_cmds): Update help text for "maint demangle",
9543 and mark as deprecated.
9545 2015-01-11 Mark Kettenis <kettenis@gnu.org>
9547 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
9548 inferior_thread is a function.
9550 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
9552 * Makefile.in (.y.c): Don't munge yacc's #line
9555 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
9557 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
9558 to prompt for input.
9559 * tui/tui-hooks.c (tui_query_hook): Remove.
9560 (tui_install_hooks): Don't set deprecated_query_hook.
9561 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
9562 height calculation. Always update the command window's cur_line.
9564 2015-01-09 Pedro Alves <palves@redhat.com>
9566 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
9568 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
9570 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
9571 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
9573 (check_stopped_by_watchpoint): New function.
9574 (save_sigtrap): Reimplement.
9575 (linux_nat_stopped_by_watchpoint): Adjust.
9576 (linux_nat_lp_status_is_event): Delete.
9577 (stop_wait_callback): Only call save_sigtrap after storing the
9579 (status_callback): If the thread had been stopped for a breakpoint
9580 that has since been removed, discard the event and resume the LWP.
9581 (count_events_callback, select_event_lwp_callback): Use
9582 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
9583 (cancel_breakpoint): Rename to ...
9584 (check_stopped_by_breakpoint): ... this. Record whether the LWP
9585 stopped for a software breakpoint or hardware breakpoint.
9586 (select_event_lwp): Only give preference to the stepping LWP in
9587 all-stop mode. Adjust comments.
9588 (stop_and_resume_callback): Remove references to new_pending_p.
9589 (linux_nat_filter_event): Likewise. Leave exit events of the
9590 leader thread pending here. Handle signal short circuiting here.
9591 Only call save_sigtrap after storing the pending waitstatus.
9592 (linux_nat_wait_1): Remove 'retry' label. Remove references to
9593 new_pending. Don't handle leaving events the caller is not
9594 interested in pending here, nor handle signal short-circuiting
9595 here. Also give equal priority to all LWPs that have had events
9596 in non-stop mode. If reporting a software breakpoint event,
9597 unadjust the LWP's PC.
9598 * linux-nat.h (enum lwp_stop_reason): New.
9599 (struct lwp_info) <stop_pc>: New field.
9600 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
9601 (struct lwp_info) <stop_reason>: New field.
9602 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
9604 2015-01-09 Pedro Alves <palves@redhat.com>
9606 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
9607 Set the LWP's 'resumed' flag.
9609 2015-01-09 Pedro Alves <palves@redhat.com>
9611 * linux-nat.c (linux_resume_one_lwp): New function.
9612 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
9613 (linux_nat_resume): Use lwp_status_pending_p and
9614 linux_resume_one_lwp.
9615 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
9616 (linux_handle_extended_wait): Use linux_resume_one_lwp.
9617 (status_callback, running_callback): Use lwp_status_pending_p.
9618 (lwp_status_pending_p): New function.
9619 (stop_and_resume_callback): Use lwp_status_pending_p.
9620 (linux_nat_filter_event): Use linux_resume_one_lwp.
9621 (linux_nat_wait_1): Always use status_callback to look for an LWP
9622 with a pending status. Use linux_resume_one_lwp.
9623 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
9624 linux_resume_one_lwp.
9626 2015-01-09 Pedro Alves <palves@redhat.com>
9628 * breakpoint.c (bp_location_inserted_here_p): New function,
9629 factored out from ...
9630 (breakpoint_inserted_here_p): ... here. Use
9631 ALL_BP_LOCATIONS_AT_ADDR.
9632 (software_breakpoint_inserted_here_p): Use
9633 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
9635 2014-01-09 Pedro Alves <palves@redhat.com>
9637 Skip enabling event reporting if the kernel supports
9639 * linux-thread-db.c: Include "nat/linux-ptrace.h".
9640 (thread_db_use_events): New function.
9641 (try_thread_db_load_1): Check thread_db_use_events before enabling
9643 (update_thread_state): New function.
9644 (attach_thread): Use it. Check thread_db_use_events before
9645 enabling event reporting.
9646 (thread_db_detach): Check thread_db_use_events before disabling
9648 (find_new_threads_callback): Check thread_db_use_events before
9649 enabling event reporting. Update the thread's state if not using
9650 libthread_db events.
9652 2015-01-09 Pedro Alves <palves@redhat.com>
9654 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
9655 about to wait for is > 0.
9656 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
9657 the kernel thread ID is -1.
9659 2015-01-09 Pedro Alves <palves@redhat.com>
9661 * linux-nat.c (attach_proc_task_lwp_callback): New function.
9662 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
9663 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
9664 ptrace option flags.
9665 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
9667 * nat/linux-procfs.c: Include <dirent.h>.
9668 (linux_proc_get_int): New parameter "warn". Handle it.
9669 (linux_proc_get_tgid): Adjust.
9670 (linux_proc_get_tracerpid): Rename to ...
9671 (linux_proc_get_tracerpid_nowarn): ... this.
9672 (linux_proc_pid_get_state): New function, factored out from
9673 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
9675 (linux_proc_pid_is_gone): New function.
9676 (linux_proc_pid_is_stopped): Adjust.
9677 (linux_proc_pid_is_zombie_maybe_warn)
9678 (linux_proc_pid_is_zombie_nowarn): New functions.
9679 (linux_proc_pid_is_zombie): Use
9680 linux_proc_pid_is_zombie_maybe_warn.
9681 (linux_proc_attach_tgid_threads): New function.
9682 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
9683 (linux_proc_get_tracerpid): Rename to ...
9684 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
9685 (linux_proc_pid_is_gone): New declaration.
9686 (linux_proc_pid_is_zombie): Update comment.
9687 (linux_proc_pid_is_zombie_nowarn): New declaration.
9688 (linux_proc_attach_lwp_func): New typedef.
9689 (linux_proc_attach_tgid_threads): New declaration.
9690 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
9691 use nowarn functions.
9692 (linux_ptrace_attach_fail_reason_string): Move here from
9693 gdbserver/linux-low.c and rename.
9694 (ptrace_supports_feature): If the current ptrace options are not
9695 known yet, check them now, instead of asserting.
9696 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
9699 2015-01-09 Pedro Alves <palves@redhat.com>
9701 * linux-thread-db.c (thread_db_find_new_threads_silently)
9702 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
9703 (find_new_threads_once): Print debug output on gdb_stdlog.
9705 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
9706 Pedro Alves <palves@redhat.com>
9708 * compile/compile.c: Include "gdb_wait.h".
9709 (do_rmdir): Check return value, and free 'zap'.
9711 2015-01-08 Pedro Alves <palves@redhat.com>
9712 Yao Qi <yao@codesourcery.com>
9714 * dwarf2loc.c (indirect_pieced_value): Don't call
9715 gdb_sign_extend. Call extract_signed_integer instead.
9716 * utils.c (gdb_sign_extend): Remove.
9717 * utils.h (gdb_sign_extend): Remove declaration.
9719 2015-01-07 Pierre Muller <muller@sourceware.org>
9722 * stabsread.c (define_symbol): Set language for C++ special symbols.
9724 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
9726 * inflow.c (initial_gdb_ttystate): Tweak comment.
9728 2015-01-07 Joel Brobecker <brobecker@adacore.com>
9730 * inflow.c (set_initial_gdb_ttystate): Add empty line after
9731 comment documenting function.
9733 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
9735 * terminal.h (set_initial_gdb_ttystate): Declare.
9736 * inflow.c (initial_gdb_ttystate): New static variable.
9737 (set_initial_gdb_ttystate): New setter.
9738 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
9739 instead of our current terminal state.
9740 * top.c (gdb_init): Call set_initial_gdb_ttystate.
9742 2015-01-07 Joel Brobecker <brobecker@adacore.com>
9744 * guile/scm-type.c (tyscm_array_1): Add comment.
9745 * python/py-type.c (typy_array_1): Add comment.
9747 2015-01-06 Joel Brobecker <brobecker@adacore.com>
9749 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
9750 error if N2 is equal to N1 - 1.
9752 2015-01-06 Joel Brobecker <brobecker@adacore.com>
9754 * python/py-type.c (typy_array_1): Do not raise negative-length
9755 exception if N2 is equal to N1 - 1.
9757 2015-01-03 Doug Evans <xdje42@gmail.com>
9759 * c-exp.y: Whitespace cleanup.
9760 (classify_inner_name): Remove extra ;.
9762 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
9764 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
9767 2015-01-02 Doug Evans <dje@google.com>
9769 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
9771 2015-01-02 Doug Evans <dje@google.com>
9773 * symtab.h (struct symbol): Fix typo in comment.
9775 2015-01-01 Joel Brobecker <brobecker@adacore.com>
9777 Update year range in copyright notice of all files.
9779 2015-01-01 Joel Brobecker <brobecker@adacore.com>
9781 * top.c (print_gdb_version): Update copyright year to 2015.
9783 2015-01-01 Joel Brobecker <brobecker@adacore.com>
9785 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
9787 For older changes see ChangeLog-2014.
9793 version-control: never