1 2015-03-24 Pedro Alves <palves@redhat.com>
3 * gdbthread.h (struct thread_control_state) <stepping_command>:
5 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
6 the thread's stepping_command field.
7 * infrun.c (resume): Check the thread's stepping_command flag to
8 determine which threads should be resumed. Rename 'entry_step'
10 (clear_proceed_status_thread): Clear 'stepping_command'.
11 (schedlock_applies): Change parameter type to struct thread_info
13 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
14 (switch_back_to_stepped_thread): Adjust calls to
16 (_initialize_infrun): Adjust "set scheduler-locking step" help.
18 2015-03-24 Pedro Alves <palves@redhat.com>
20 * infrun.c (step_start_function): Delete and ...
21 * gdbthread.h (struct thread_control_state) <step_start_function>:
23 * infrun.c (clear_proceed_status_thread): Clear the thread's
25 (proceed, process_event_stop_test, print_stop_event): Adjust.
27 2015-03-24 Pedro Alves <palves@redhat.com>
29 * infrun.c (proceed): No longer handle negative step.
31 2015-03-24 Gary Benson <gbenson@redhat.com>
33 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
34 (x86_linux_prepare_to_resume): Likewise.
35 * x86-linux-nat.c (x86_linux_new_thread):
36 Moved to nat/x86-linux.c.
37 (x86_linux_prepare_to_resume): Likewise.
38 * nat/x86-linux.c (x86_linux_new_thread): New function.
39 (x86_linux_prepare_to_resume): Likewise.
41 2015-03-24 Gary Benson <gbenson@redhat.com>
43 * nat/x86-linux-dregs.h: New file.
44 * nat/x86-linux-dregs.c: Likewise.
45 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
46 (x86-linux-dregs.o): New rule.
47 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
48 * config/i386/linux64.mh (NATDEPFILES): Likewise.
49 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
50 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
51 (x86_linux_dr_get): Likewise.
52 (x86_linux_dr_set): Likewise.
53 (x86_linux_dr_get_addr): Likewise.
54 (x86_linux_dr_get_control): Likewise.
55 (x86_linux_dr_get_status): Likewise.
56 (update_debug_registers_callback): Likewise.
57 (x86_linux_dr_set_control): Likewise.
58 (x86_linux_dr_set_addr): Likewise.
59 (x86_linux_update_debug_registers): Likewise.
61 2015-03-24 Gary Benson <gbenson@redhat.com>
63 * x86-linux-nat.c (x86_linux_update_debug_registers):
64 New function, factored out from...
65 (x86_linux_prepare_to_resume): ...this.
67 2015-03-24 Gary Benson <gbenson@redhat.com>
69 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
70 (x86_linux_dr_set): Likewise.
71 (x86_linux_dr_get_addr): Likewise.
72 (x86_linux_dr_get_control): Likewise.
73 (x86_linux_dr_get_status): Likewise.
74 (update_debug_registers_callback): Likewise.
75 (x86_linux_dr_set_control): Likewise.
76 (x86_linux_dr_set_addr): Likewise.
77 (x86_linux_prepare_to_resume): Likewise.
78 (x86_linux_new_thread): Likewise.
80 2015-03-24 Gary Benson <gbenson@redhat.com>
82 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
83 (x86_linux_new_thread): Rename argument.
85 2015-03-24 Gary Benson <gbenson@redhat.com>
87 * nat/x86-linux.h: New file.
88 * nat/x86-linux.c: Likewise.
89 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
90 (x86-linux.o): New rule.
91 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
92 * config/i386/linux64.mh (NATDEPFILES): Likewise.
93 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
94 (lwp_set_arch_private_info): New declaration.
95 (lwp_arch_private_info): Likewise.
96 * linux-nat.c (lwp_set_arch_private_info): New function.
97 (lwp_arch_private_info): Likewise.
98 * x86-linux-nat.c: Include nat/x86-linux.h.
99 (arch_lwp_info): Removed structure.
100 (update_debug_registers_callback):
101 Use lwp_set_debug_registers_changed.
102 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
103 and lwp_set_debug_registers_changed.
104 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
106 2015-03-24 Gary Benson <gbenson@redhat.com>
108 * nat/linux-nat.h (ptid_of_lwp): New declaration.
109 (lwp_is_stopped): Likewise.
110 (lwp_stop_reason): Likewise.
111 * linux-nat.c (ptid_of_lwp): New function.
112 (lwp_is_stopped): Likewise.
113 (lwp_is_stopped_by_watchpoint): Likewise.
114 * x86-linux-nat.c (update_debug_registers_callback):
116 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
119 2015-03-24 Gary Benson <gbenson@redhat.com>
121 * linux-nat.h (linux_stop_lwp): Move declaration to...
122 * nat/linux-nat.h (linux_stop_lwp): New declaration.
124 2015-03-24 Gary Benson <gbenson@redhat.com>
126 * linux-nat.h: Include nat/linux-nat.h.
127 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
128 * nat/linux-nat.h (struct lwp_info): New forward declaration.
129 (iterate_over_lwps_ftype): New typedef.
130 (iterate_over_lwps): New declaration.
131 * linux-nat.h (iterate_over_lwps): Update comment. Use
132 iterate_over_lwps_ftype. Update callback return value check.
134 2015-03-24 Gary Benson <gbenson@redhat.com>
136 * x86-nat.h (x86_debug_reg_state): Move declaration to...
137 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
139 2015-03-24 Gary Benson <gbenson@redhat.com>
141 * nat/linux-nat.h (current_lwp_ptid): New declaration.
142 * linux-nat.c (current_lwp_ptid): New function.
143 * x86-linux-nat.c: Include nat/linux-nat.h.
144 (x86_linux_dr_get_addr): Use current_lwp_ptid.
145 (x86_linux_dr_get_control): Likewise.
146 (x86_linux_dr_get_status): Likewise.
147 (x86_linux_dr_set_control): Likewise.
148 (x86_linux_dr_set_addr): Likewise.
150 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
153 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
155 2015-03-23 Joel Brobecker <brobecker@adacore.com>
157 * ser-mingw.c (ser_windows_setparity): Fix indentation.
158 * ser-unix.c (hardwire_setparity): Likewise.
160 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
162 * NEWS: Mention set/show serial parity command.
163 * monitor.c (monitor_open): Call serial_setparity.
164 * remote.c (remote_open_1): Likewise.
165 * ser-base.c (ser_base_serparity): New function.
166 * ser-base.h (ser_base_setparity): Add declaration.
167 * ser-go32.c (dos_ops): Set "setparity" field.
168 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
170 (ser_windows_setparity): New function.
171 (hardwire_ops): Add ser_windows_setparity.
172 (tty_ops): Add NULL for setparity field.
173 (pipe_ops): Add ser_base_setparity.
175 * ser-pipe.c (pipe_ops): Likewise.
176 * ser-tcp.c (tcp_ops): Likewise.
177 * ser-unix.c (hardwire_setparity): Add declaration.
178 (hardwire_raw): Don't reset PARENB flag.
179 (hardwire_setparity): New function.
180 (hardwire_ops): Add hardwire_setparity.
181 * serial.c (serial_setparity): New function.
182 (serial_parity): New global.
183 (parity_none, parity_odd, parity_even, parity_enums, parity):
185 (set_parity): New function.
186 (_initialize_serial): Add set/show serial parity commands.
187 * serial.h (GDBPARITY_NONE): Define.
188 (GDBPARITY_ODD): Define.
189 (GDBPARITY_EVEN): Define.
190 (serial_setparity) Add declaration.
191 (struct serial_ops): Add setparity field.
192 * target.h (serial_parity): Add declaration.
194 2015-03-23 Keith Seitz <keiths@redhat.com>
196 * linespec.c (linespec_lexer_lex_keyword): Update comment.
198 2015-03-23 Keith Seitz <keiths@redhat.com>
200 * breakpoint.c (parse_breakpoint_sals): Use
201 linespec_lexer_lex_keyword to ascertain if the user specified
203 * linespec.c [IF_KEYWORD_INDEX]: Define.
204 (linespec_lexer_lex_keyword): Export.
205 (struct ls_parser) <keyword_ok>: Remove.
206 A keyword is only a keyword if not followed by another keyword.
207 (linespec_lexer_lex_one): Remove keyword_ok handling.
208 Add comment explaining why the parsing stream is not advanced
209 when a keyword is seen.
210 (parse_linespec): Remove parser->keyword_ok.
211 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
213 2015-03-23 Keith Seitz <keiths@redhat.com>
216 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
217 if we find a static method with DW_AT_vtable_elem_location.
219 2015-03-21 Eli Zaretskii <eliz@gnu.org>
221 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
222 before the second loop, to avoid undefined behavior. Reported by
223 Anton Blanchard <anton@samba.org>.
225 2015-03-20 Keven Boell <keven.boell@intel.com>
227 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
228 data_location usage to linked list.
229 (resolve_dynamic_type_internal): Adapt data_location to
231 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
232 (copy_type_recursive, copy_type): Add copy of linked list.
233 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
234 (struct dynamic_prop_list): New struct.
235 * dwarf2read.c (set_die_type): Set data_location data.
237 2015-03-20 Pedro Alves <palves@redhat.com>
239 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
240 inner block and make it const.
241 * machoread.c (get_archive_prefix_len): Make "lparen" const.
243 2015-03-20 Pedro Alves <palves@redhat.com>
245 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
246 * breakpoint.h (set_breakpoint_condition): Update declaration.
248 2015-03-20 Pedro Alves <palves@redhat.com>
250 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
252 2015-03-20 Pedro Alves <palves@redhat.com>
254 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
256 2015-03-20 Pedro Alves <palves@redhat.com>
258 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
260 2015-03-20 Pedro Alves <palves@redhat.com>
262 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
263 (nto_init_solib_absolute_prefix): Likewise.
265 2015-03-20 Pedro Alves <palves@redhat.com>
267 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
268 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
270 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
272 * config/djgpp/README: Remove gdb.hp.
274 2015-03-20 Yao Qi <yao.qi@linaro.org>
276 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
277 set_gdbarch_cannot_step_breakpoint.
279 2015-03-19 Pedro Alves <palves@redhat.com>
281 * linux-nat.c (linux_resume_one_lwp): Rename to ...
282 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
283 instead call perror_with_name.
284 (check_ptrace_stopped_lwp_gone): New function.
285 (linux_resume_one_lwp): Reimplement as wrapper around
286 linux_resume_one_lwp_throw that swallows errors if the LWP is
288 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
289 swallows errors if the LWP is gone. Use
290 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
292 2015-03-19 Pedro Alves <palves@redhat.com>
294 * linux-nat.c (status_callback): Return early if the LWP has no
297 2015-03-19 Pedro Alves <palves@redhat.com>
299 * linux-nat.c (select_event_lwp_callback): Update comment to no
300 longer mention SIGTRAP.
302 2015-03-18 Tristan Gingold <gingold@adacore.com>
304 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
305 redirection code to ...
306 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
307 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
309 2015-03-18 Gary Benson <gbenson@redhat.com>
311 (remote_protocol_features): Remove the "vFile:fstat" feature.
312 (remote_hostio_fstat): Probe for "vFile:fstat" support.
314 2015-03-11 Yao Qi <yao.qi@linaro.org>
317 * aarch64-linux-tdep.c: Include xml-syscall.h
318 (aarch64_linux_get_syscall_number): New function.
319 (aarch64_linux_init_abi): Call
320 set_gdbarch_get_syscall_number.
321 * syscalls/aarch64-linux.xml: New file.
323 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
325 * ser-base.h (ser_base_setstopbits): Change second argument name
326 from "rate" to "num".
328 2015-03-17 Gary Benson <gbenson@redhat.com>
329 Luke Allardyce <lukeallardyce@gmail.com>
332 * common/common-remote-fileio.h (sys/stat.h): New include.
333 (stuct stat): Remove forward declaration.
335 2015-03-16 John Baldwin <jhb@FreeBSD.org>
337 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
338 before writing core register notes.
340 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
341 Pedro Alves <palves@redhat.com>
343 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
344 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
345 (tgoto): Wrap with extern "C".
347 2015-03-16 Pedro Alves <palves@redhat.com>
348 Yuanhui Zhang <asmwarrior@gmail.com>
350 * stub-termcap.c (tputs): Change prototype.
352 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
353 Pedro Alves <palves@redhat.com>
355 * windows-nat.c (struct thread_info_struct): Rename to ...
356 (struct windows_thread_info_struct): ... this.
357 (thread_info): Rename to ...
358 (windows_thread_info): ... this.
361 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
362 Pedro Alves <palves@redhat.com>
364 * NEWS: New Removed targets and native configurations.
366 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
369 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
370 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
371 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
372 ia64-hpux-tdep.h, solib-ia64-hpux.h.
373 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
374 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
375 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
377 * config/ia64/hpux.mh: Remove file.
378 * config/pa/hpux.mh: Remove file.
379 * configure: Rebuilt.
380 * configure.ac (dlgetmodinfo, somread.o): Remove.
381 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
382 (ia64-*-hpux*): Remove its float format exception.
383 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
384 * hppa-hpux-nat.c: Remove file.
385 * hppa-hpux-tdep.c: Remove file.
386 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
387 Move them here from hppa-tdep.h
388 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
389 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
390 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
391 Move them to hppa-tdep.c.
392 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
394 * ia64-hpux-nat.c: Remove file.
395 * ia64-hpux-tdep.c: Remove file.
396 * ia64-hpux-tdep.h: Remove file.
397 * inf-ttrace.c: Remove file.
398 * inf-ttrace.h: Remove file.
399 * solib-ia64-hpux.c: Remove file.
400 * solib-ia64-hpux.h: Remove file.
401 * solib-pa64.c: Remove file.
402 * solib-pa64.h: Remove file.
403 * solib-som.c: Remove file.
404 * solib-som.h: Remove file.
405 * somread.c: Remove file.
407 2015-03-13 John Baldwin <jhb@FreeBSD.org>
409 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
410 * config.in: Regenerate.
411 * configure: Regenerate.
412 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
414 (fbsd_find_memory_regions): Use kinfo_getvmmap to
415 enumerate memory regions if present.
417 2015-03-13 John Baldwin <jhb@FreeBSD.org>
419 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
420 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
422 (i386fbsd_sigtramp_p): Likewise.
424 2015-03-12 John Baldwin <jhb@FreeBSD.org>
426 * MAINTAINERS (Write After Approval): Add John Baldwin.
428 2015-03-12 Gary Benson <gbenson@redhat.com>
430 * solib.c (_initialize_solib): Make "set/show sysroot" use
431 add_setshow_optional_filename_cmd so it can be restored to
432 empty after being set.
434 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
436 * Makefile.in (SFILES): New source break-catch-syscall.c.
437 (COMMON_OBS): New object break-catch-syscall.o.
438 * break-catch-syscall.c: New file.
439 * breakpoint.c: Remove inclusion of "xml-syscall.h".
440 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
441 (struct syscall_catchpoint): Likewise.
442 (dtor_catch_syscall): Likewise.
443 (catch_syscall_inferior_data): Likewise.
444 (struct catch_syscall_inferior_data): Likewise.
445 (get_catch_syscall_inferior_data): Likewise.
446 (catch_syscall_inferior_data_cleanup): Likewise.
447 (insert_catch_syscall): Likewise.
448 (remove_catch_syscall): Likewise.
449 (breakpoint_hit_catch_syscall): Likewise.
450 (print_it_catch_syscall): Likewise.
451 (print_one_catch_syscall): Likewise.
452 (print_mention_catch_syscall): Likewise.
453 (print_recreate_catch_syscall): Likewise.
454 (catch_syscall_breakpoint_ops): Likewise.
455 (syscall_catchpoint_p): Likewise.
456 (create_syscall_event_catchpoint): Likewise.
457 (catch_syscall_split_args): Likewise.
458 (catch_syscall_command_1): Likewise.
459 (is_syscall_catchpoint_enabled): Likewise.
460 (catch_syscall_enabled): Likewise.
461 (catching_syscall_number): Likewise.
462 (catch_syscall_completer): Likewise.
463 (clear_syscall_counts): Likewise.
464 (initialize_breakpoint_ops): Move initialization of syscall
465 catchpoints to break-catch-syscall.c.
466 (_initialize_breakpoint): Move code related to syscall catchpoints
467 to break-catch-syscall.c.
469 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
471 * breakpoint.c (breakpoint_find_if): New function.
472 * breakpoint.h (breakpoint_find_if): New prototype.
474 2015-03-11 Gary Benson <gbenson@redhat.com>
476 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
477 * remote-fileio.c (remote_fileio_to_host_uint): New function.
478 (remote_fileio_to_host_ulong): Likewise.
479 (remote_fileio_to_host_mode): Likewise.
480 (remote_fileio_to_host_time): Likewise.
481 (remote_fileio_to_host_stat): Likewise.
482 * remote.c (PACKET_vFile_fstat): New enum value.
483 (remote_protocol_features): Register the "vFile:fstat" feature.
484 (remote_hostio_fstat): New function.
485 (remote_bfd_iovec_stat): Use the above.
486 (_initialize_remote): Register new "set/show remote
487 hostio-fstat-packet" command.
488 * symfile.c (separate_debug_file_exists): Update comment.
489 * NEWS: Announce new vFile:fstat packet.
491 2015-03-11 Gary Benson <gbenson@redhat.com>
493 * common/common-remote-fileio.h: New file.
494 * common/common-remote-fileio.c: Likewise.
495 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
496 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
497 (COMMON_OBS): Add common-remote-fileio.o.
498 (common-remote-fileio.o): New rule.
499 * remote-fileio.h (common-remote-fileio.h): New include.
500 * remote-fileio.c (gdb/fileio.h): Do not include.
501 (remote_fileio_to_be): Moved to common-remote-fileio.h.
502 (remote_fileio_to_fio_uint): Likewise.
503 (remote_fileio_to_fio_time): Likewise.
504 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
505 (remote_fileio_to_fio_mode): Likewise.
506 (remote_fileio_to_fio_ulong): Likewise.
507 (remote_fileio_to_fio_stat): Likewise.
509 2015-03-11 Andy Wingo <wingo@igalia.com>
511 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
512 we were checking the cached type, not the cached dynamic type.
514 2015-03-11 Andy Wingo <wingo@igalia.com>
516 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
517 other strings, as these are on the GC'd heap, and will be
518 collected along with the smob.
520 2015-03-11 Andy Wingo <wingo@igalia.com>
522 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
523 (objfile_functions): Bind gdbscm_objfile_progspace to
525 * guile/lib/gdb.scm: Add objfile-progspace to exports.
527 2015-03-11 Andy Wingo <wingo@igalia.com>
529 * guile/guile.c (_initialize_guile): Disable automatic
530 finalization, if Guile offers us that possibility.
531 * guile/guile.c (call_initialize_gdb_module):
532 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
533 finalizers in appropriate places.
534 * configure.ac (AC_TRY_LIBGUILE): Add a check for
535 scm_set_automatic_finalization_enabled.
536 * configure: Regenerated.
538 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
540 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
543 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
545 * s390-linux-nat.c (struct arch_lwp_info): New.
546 (s390_fix_watch_points): Rename to...
547 (s390_prepare_to_resume): ...this. Skip the PER info update
548 unless the watch points have changed.
549 (s390_refresh_per_info, s390_new_thread): New functions.
550 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
551 s390_fix_watch_points.
552 (s390_remove_watchpoint): Likewise.
553 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
554 Register s390_prepare_to_resume.
556 2015-03-09 Pedro Alves <palves@redhat.com>
559 2015-03-07 Pedro Alves <palves@redhat.com>
560 * common/gdb_socket.h: New file.
561 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
563 (net_open): Use union gdb_sockaddr_u.
565 2015-03-07 Pedro Alves <palves@redhat.com>
567 * configure.ac (build_warnings): Move -Wmissing-prototypes
568 -Wdeclaration-after-statement -Wmissing-parameter-type
569 -Wold-style-declaration -Wold-style-definition to the C-specific
571 * configure: Regenerate.
573 2015-03-07 Pedro Alves <palves@redhat.com>
575 * common/gdb_socket.h: New file.
576 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
578 (net_open): Use union gdb_sockaddr_u.
580 2015-03-07 Pedro Alves <palves@redhat.com>
582 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
583 (exceptions_state_mc_action_iter)
584 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
586 [__cplusplus] (try_scope_depth): New global.
587 [__cplusplus] (exception_try_scope_entry)
588 (exception_try_scope_exit, gdb_exception_sliced_copy)
589 (exception_rethrow): New functions.
590 (throw_exception): In C++ mode, throw
591 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
592 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
593 (throw_it): In C++ mode, use try_scope_depth.
594 * common/common-exceptions.h [!__cplusplus]
595 (exceptions_state_mc_action_iter)
596 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
598 [__cplusplus] (exception_try_scope_entry)
599 (exception_try_scope_exit, exception_rethrow): Declare.
600 [__cplusplus] (struct exception_try_scope): New struct.
601 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
603 (struct gdb_exception_RETURN_MASK_ALL)
604 (struct gdb_exception_RETURN_MASK_ERROR)
605 (struct gdb_exception_RETURN_MASK_QUIT): New types.
607 2015-03-07 Pedro Alves <palves@redhat.com>
609 * main.c (handle_command_errors): Remove volatile qualifier from
612 2015-03-07 Pedro Alves <palves@redhat.com>
614 * breakpoint.c (save_breakpoints): Adjust to avoid code between
616 * gdbtypes.c (safe_parse_type): Remove empty line.
617 (types_deeply_equal):
618 * guile/scm-frame.c (gdbscm_frame_name):
619 * linux-thread-db.c (find_new_threads_once):
620 * python/py-breakpoint.c (bppy_get_commands):
621 * record-btrace.c (record_btrace_insert_breakpoint)
622 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
623 (record_btrace_start_replaying): Adjust to avoid code between TRY
626 2015-03-07 Pedro Alves <palves@redhat.com>
628 * common/common-exceptions.c (struct catcher) <exception>: No
629 longer a pointer to volatile exception. Now an exception value.
630 <mask>: Delete field.
631 (exceptions_state_mc_init): Remove all parameters. Adjust.
632 (exceptions_state_mc): No longer pop the catcher here.
633 (exceptions_state_mc_catch): New function.
634 (throw_exception): Adjust.
635 * common/common-exceptions.h (exceptions_state_mc_init): Remove
637 (exceptions_state_mc_catch): Declare.
638 (TRY_CATCH): Rename to ...
639 (TRY): ... this. Remove EXCEPTION and MASK parameters.
640 (CATCH, END_CATCH): New.
641 All callers adjusted.
643 2015-03-07 Tom Tromey <tromey@redhat.com>
645 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
647 2015-03-07 Pedro Alves <palves@redhat.com>
649 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
650 (amd64_epilogue_frame_cache): Normal exception handling code.
651 * break-catch-throw.c (check_status_exception_catchpoint)
652 (re_set_exception_catchpoint): Ditto.
653 * cli/cli-interp.c (safe_execute_command):
654 * cli/cli-script.c (script_from_file): Ditto.
655 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
657 * compile/compile-object-run.c (compile_object_run): Ditto.
658 * cp-abi.c (baseclass_offset): Ditto.
659 * cp-valprint.c (cp_print_value): Ditto.
660 * exceptions.c (catch_exceptions_with_msg):
661 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
662 * frame.c (get_frame_address_in_block_if_available): Ditto.
663 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
664 (i386_sigtramp_frame_cache): Ditto.
665 * infcmd.c (post_create_inferior): Ditto.
666 * linespec.c (parse_linespec, find_linespec_symbols):
667 * p-valprint.c (pascal_object_print_value): Ditto.
668 * parse.c (parse_expression_for_completion): Ditto.
669 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
670 * remote.c (remote_get_noisy_reply): Ditto.
671 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
672 * solib-svr4.c (solib_svr4_r_map): Ditto.
674 2015-03-06 Gary Benson <gbenson@redhat.com>
676 * common/common-utils.h (startswith): New inline function.
677 All places where this logic was used updated to use the above.
679 2015-03-05 Pedro Alves <palves@redhat.com>
682 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
683 after reading the breakpoint's shadow memory.
685 2015-03-05 Mark Kettenis <kettenis@gnu.org>
687 * hppabsd-nat.c: Remove file.
688 * hppaobsd-nat.c: New file.
689 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
691 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
694 2015-03-04 Pedro Alves <palves@redhat.com>
696 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
697 (target_decr_pc_after_break): Delete declaration.
698 * target.c (default_target_decr_pc_after_break)
699 (target_decr_pc_after_break): Delete.
700 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
701 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
702 * linux-thread-db.c (check_event): Likewise.
703 * infrun.c (adjust_pc_after_break): Likewise.
704 * darwin-nat.c (cancel_breakpoint): Likewise.
705 * aix-thread.c (aix_thread_wait): Likewise.
706 * target-delegates.c: Regenerate.
708 2015-03-04 Pedro Alves <palves@redhat.com>
710 * linux-nat.c (save_sigtrap): Check for breakpoints before
711 checking watchpoints.
712 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
713 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
714 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
715 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
716 (linux_nat_stopped_by_sw_breakpoint)
717 (linux_nat_supports_stopped_by_sw_breakpoint)
718 (linux_nat_stopped_by_hw_breakpoint)
719 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
720 (linux_nat_wait_1): Don't re-increment the PC if relying on
721 SIGTRAP's siginfo->si_code.
722 (linux_nat_add_target): Install new target methods.
723 * linux-thread-db.c (check_event): Don't account for breakpoint PC
724 offset if the target already adjusted the PC.
725 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
726 (GDB_ARCH_TRAP_BRKPT): New.
727 (TRAP_HWBKPT): Define if not already defined.
729 2015-03-04 Pedro Alves <palves@redhat.com>
731 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
732 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
734 <stop_reason>: New field.
735 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
736 (packet_set_cmd_state): New function.
737 (remote_protocol_features): Register the "swbreak" and "hwbreak"
739 (remote_query_supported): If not disabled with the corresponding
740 "set remote foo-packet" command, report support for the swbreak
741 and hwbreak features.
742 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
744 <stop_reason>: New field.
745 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
746 (remote_wait_as): Adjust.
747 (remote_stopped_by_sw_breakpoint)
748 (remote_supports_stopped_by_sw_breakpoint)
749 (remote_stopped_by_hw_breakpoint)
750 (remote_supports_stopped_by_hw_breakpoint): New functions.
751 (remote_stopped_by_watchpoint): New function.
752 (init_remote_ops): Install them.
753 (_initialize_remote): Register new "set/show remote
754 swbreak-feature-packet" and "set/show remote
755 swbreak-feature-packet" commands.
757 2015-03-04 Pedro Alves <palves@redhat.com>
759 * btrace.h: Include target/waitstatus.h.
760 (struct btrace_thread_info) <stop_reason>: New field.
761 * record-btrace.c (record_btrace_step_thread): Use
762 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
763 (record_btrace_decr_pc_after_break): Delete.
764 (record_btrace_stopped_by_sw_breakpoint)
765 (record_btrace_supports_stopped_by_sw_breakpoint)
766 (record_btrace_stopped_by_hw_breakpoint)
767 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
768 (init_record_btrace_ops): Install them.
769 * record-full.c (record_full_hw_watchpoint): Delete and replace
771 (record_full_stop_reason): ... this throughout.
772 (record_full_exec_insn): Adjust.
773 (record_full_wait_1): Adjust. No longer re-increment the PC.
774 (record_full_wait_1): Adjust. Use
775 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
776 (record_full_stopped_by_watchpoint): Adjust.
777 (record_full_stopped_by_sw_breakpoint)
778 (record_full_supports_stopped_by_sw_breakpoint)
779 (record_full_supports_stopped_by_sw_breakpoint)
780 (record_full_stopped_by_hw_breakpoint)
781 (record_full_supports_stopped_by_hw_breakpoint): New functions.
782 (init_record_full_ops, init_record_full_core_ops): Install them.
783 * record.c (record_check_stopped_by_breakpoint): New function.
784 * record.h: Include target/waitstatus.h.
785 (record_check_stopped_by_breakpoint): New declaration.
787 2015-03-04 Pedro Alves <palves@redhat.com>
789 enum lwp_stop_reason -> enum target_stop_reason
790 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
791 (linux_nat_stopped_by_watchpoint, status_callback)
792 (linux_nat_wait_1): Adjust.
793 * linux-nat.h (enum lwp_stop_reason): Delete.
794 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
795 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
796 * target/waitstatus.h (enum target_stop_reason): New.
798 2015-03-04 Pedro Alves <palves@redhat.com>
800 * breakpoint.c (need_moribund_for_location_type): New function.
801 (bpstat_stop_status): Don't skipping checking moribund locations
802 of breakpoint types which the target tell caused a stop.
803 (program_breakpoint_here_p): New function, factored out from ...
804 (bp_loc_is_permanent): ... this.
805 (update_global_location_list): Don't create a moribund location if
806 the target supports reporting stops of the type of the removed
808 * breakpoint.h (program_breakpoint_here_p): New declaration.
809 * infrun.c (adjust_pc_after_break): Return early if the target has
810 already adjusted the PC. Add comments.
811 (handle_signal_stop): If nothing explains a signal, and the target
812 tells us the stop was caused by a software breakpoint, check if
813 there's a breakpoint instruction in the memory. If so, adjust the
814 PC before presenting the stop to the user. Otherwise, ignore the
815 trap. If nothing explains a signal, and the target tells us the
816 stop was caused by a hardware breakpoint, ignore the trap.
817 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
818 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
819 to_supports_stopped_by_hw_breakpoint>: New fields.
820 (target_stopped_by_sw_breakpoint)
821 (target_supports_stopped_by_sw_breakpoint)
822 (target_stopped_by_hw_breakpoint)
823 (target_supports_stopped_by_hw_breakpoint): Define.
824 * target-delegates.c: Regenerate.
826 2015-03-04 Pedro Alves <palves@redhat.com>
828 * infrun.c (follow_fork_inferior): Use the whole of the
829 inferior_ptid and pending_follow.related_pid ptids instead of
830 building ptids from the process components. Adjust verbose output
831 to use target_pid_to_str.
832 * linux-nat.c (linux_child_follow_fork): Use the whole of the
833 inferior_ptid and pending_follow.related_pid ptids instead of
834 building ptids from the process components.
836 2015-03-04 Mark Kettenis <kettenis@gnu.org>
838 * inf-ptrace.c [PT_GET_PROCESS_STATE]
839 (inf_ptrace_insert_fork_catchpoint): New function.
840 (inf_ptrace_remove_fork_catchpoint): New function.
841 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
843 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
845 * s390-linux-tdep.c (s390_register_name): Return empty string
846 instead of NULL for registers that shouldn't be visible.
848 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
850 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
851 XML file for 64-bit targets.
853 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
855 * target.h (find_default_create_inferior): Remove declaration.
856 (find_default_attach): Likewise.
858 2015-03-03 Pedro Alves <palves@redhat.com>
860 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
861 Use ptid_get_pid to get the overall process id when resuming all
864 2015-03-03 Pedro Alves <palves@redhat.com>
866 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
867 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
868 * inf-ptrace.c (get_ptrace_pid): New function.
869 (inf_ptrace_resume): Use it.
870 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
873 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
875 * nat/linux-btrace.c: Include sys/utsname.h.
876 (linux_determine_kernel_ptr_bits): New.
877 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
878 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
881 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
883 * btrace.c (ftrace_update_function): Treat return as tailcall for
884 "_dl_runtime_resolve".
886 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
888 * btrace.h (btrace_function) <lbegin, lend>: Remove.
889 * btrace.c (ftrace_debug): Do not print the line range.
890 (ftrace_skip_file, ftrace_update_lines): Remove.
891 (ftrace_new_function): Remove lbegin and lend initialization.
892 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
893 * record-btrace.c (btrace_compute_src_line_range): New.
894 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
896 2015-03-02 Pedro Alves <palves@redhat.com>
898 * infrun.c (follow_exec): Delete all threads of the process except
899 the event thread. Extended comments.
901 2015-03-02 Joel Brobecker <brobecker@adacore.com>
903 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
905 2015-03-02 Joel Brobecker <brobecker@adacore.com>
907 * utils.h: Remove <stdbool.h> #include.
908 (producer_is_gcc): Change return type to "int".
909 * utils.c (producer_is_gcc): Change return type to int.
910 Return 1 instead of true, and 0 instead of false.
911 Adjust function documentation accordingly.
913 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
915 * s390-linux-nat.c (have_regset_vxrs): New static variable.
916 (s390_linux_fetch_inferior_registers): Handle vector registers, if
918 (s390_linux_store_inferior_registers): Likewise.
919 (s390_get_hwcap): Remove function. Embed its logic...
920 (s390_read_description): ...here. Yield a target description with
921 vector registers if applicable.
922 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
923 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
924 "features/s390x-tevx-linux64.c".
925 (struct gdbarch_tdep) <v0_full_regnum>: New field.
926 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
927 for "GNU/Linux-specific registers".
928 (s390_dwarf_reg_r0l): New enum value.
929 (s390_dwarf_reg_to_regnum): Support vector registers.
930 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
932 (regnum_is_vxr_full): New function.
933 (s390_register_name): New function.
934 (s390_pseudo_register_name): Handle v0-v15, which are composed of
936 (s390_pseudo_register_type): Likewise.
937 (s390_pseudo_register_read): Likewise.
938 (s390_pseudo_register_write): Likewise.
939 (s390_value_from_register): Account for the fact that values are
940 placed left-justified in vector registers.
941 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
942 the vector reggroup and omit them from the general reggroup.
943 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
944 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
945 (s390_iterate_over_regset_sections): Add iterations for the two
947 (s390_core_read_description): Yield a target description with
948 vector registers if applicable.
949 (s390_gdbarch_init): Handle target descriptions with vector
950 registers. Add "register_name" gdbarch method.
951 (_initialize_s390_tdep): Call new tdesc initialization functions.
952 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
953 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
954 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
955 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
956 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
957 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
958 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
959 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
960 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
961 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
962 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
963 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
964 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
965 (S390_NUM_REGS): Adjust value.
966 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
967 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
968 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
969 * NEWS: Announce S/390 vector register support.
971 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
973 * features/s390-tevx-linux64.xml: New file.
974 * features/s390-vx-linux64.xml: New file.
975 * features/s390-vx.xml: New file.
976 * features/s390x-tevx-linux64.xml: New file.
977 * features/s390x-vx-linux64.xml: New file.
978 * features/Makefile (WHICH): Add s390-vx-linux64,
979 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
980 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
981 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
983 * features/s390-tevx-linux64.c: New generated file.
984 * features/s390-vx-linux64.c: Likewise.
985 * features/s390x-tevx-linux64.c: Likewise.
986 * features/s390x-vx-linux64.c: Likewise.
987 * regformats/s390-tevx-linux64.dat: Likewise.
988 * regformats/s390-vx-linux64.dat: Likewise.
989 * regformats/s390x-tevx-linux64.dat: Likewise.
990 * regformats/s390x-vx-linux64.dat: Likewise.
992 2015-02-28 Doug Evans <xdje42@gmail.com>
994 * symtab.h (struct symtab) <next>: Fix comment.
996 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
998 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
1001 2015-02-27 Pedro Alves <palves@redhat.com>
1003 * dtrace-probe.c (dtrace_probe_ops): Make extern.
1005 2015-02-27 Pedro Alves <palves@redhat.com>
1007 * common/common-exceptions.h (exception_none): Declare.
1008 * common/common-exceptions.c (exception_none): Moved from
1010 (exceptions_state_mc_init): Use exception_none.
1011 * exceptions.c (exception_none): Move to
1012 common/common-exceptions.c.
1013 * exceptions.h (exception_none): Move to
1014 common/common-exceptions.h.
1016 2015-02-27 Pedro Alves <palves@redhat.com>
1018 * main.c (catch_command_errors, catch_command_errors_const):
1019 Remove 'mask' argument. Adjust.
1020 (captured_main): Adjust callers.
1022 2015-02-27 Pedro Alves <palves@redhat.com>
1024 * python/python-internal.h: Include "extension-priv.h".
1026 2015-02-27 Pedro Alves <palves@redhat.com>
1028 * breakpoint.h (enum print_stop_action): Move further up in the
1031 2015-02-27 Pedro Alves <palves@redhat.com>
1033 * gdbarch.sh: Include regcache.h.
1034 * gdbarch.h: Regenerate.
1036 2015-02-27 Pedro Alves <palves@redhat.com>
1038 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
1039 Remove duplicate const.
1040 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
1043 2015-02-27 Pedro Alves <palves@redhat.com>
1045 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
1046 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
1047 * features/feature_to_c.sh: Tag the generated xml_builtin array
1048 with extern const in C++ mode.
1050 2015-02-27 Tom Tromey <tromey@redhat.com>
1052 * minidebug.c (struct lzma_stream): Rename to ...
1053 (struct gdb_lzma_stream): ... this.
1054 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
1056 2015-02-27 Pedro Alves <palves@redhat.com>
1058 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
1060 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
1061 (mi_cmd_stack_list_variables): Use it.
1063 2015-02-27 Pedro Alves <palves@redhat.com>
1065 * x86-linux-nat.c (u_debugreg_offset): New function.
1066 (x86_linux_dr_get, x86_linux_dr_set): Use it.
1068 2015-02-27 Pedro Alves <palves@redhat.com>
1070 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
1072 Include break-common.h.
1074 2015-02-27 Tom Tromey <tromey@redhat.com>
1075 Pedro Alves <palves@redhat.com>
1077 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
1078 local used to iterate over enums.
1079 * completer.c (signal_completer): Likewise.
1080 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
1081 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
1082 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
1083 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
1084 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
1085 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
1086 * tui-wingeneral.c (tui_refresh_all): Likewise.
1088 2015-02-27 Pedro Alves <palves@redhat.com>
1090 * target.h: Include "infrun.h".
1092 2015-02-27 Pedro Alves <palves@redhat.com>
1094 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
1096 2015-02-27 Pedro Alves <palves@redhat.com>
1098 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
1100 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
1102 2015-02-27 Pedro Alves <palves@redhat.com>
1104 * cli-out.c (_rl_erase_entire_line): Move declaration out of
1105 cli_mld_erase_entire_line, and make it extern "C".
1106 * common/common-defs.h (EXTERN_C): New.
1107 * completer.c (_rl_completion_prefix_display_length)
1108 (_rl_print_completions_horizontally, QSFUNC): Move declarations
1109 out of gdb_display_match_list_1.
1110 (_rl_qsort_string_compare): Move declaration out of
1111 gdb_display_match_list_1, and make it extern "C".
1112 * defs.h (re_comp): Use EXTERN_C.
1113 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
1114 and make it extern "C".
1115 (monstartup): Move declaration out of maintenance_set_profile_cmd,
1116 and make it extern "C".
1117 (main): Move declaration out of maintenance_set_profile_cmd.
1118 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
1121 2015-02-27 Pedro Alves <palves@redhat.com>
1123 * python/python.c (GdbMethods): Rename to ...
1124 (python_GdbMethods): ... this and make extern.
1125 (GdbModuleDef): Rename to ...
1126 (python_GdbModuleDef): ... this and make extern.
1128 2015-02-27 Pedro Alves <palves@redhat.com>
1130 * record-btrace.c (set_record_btrace_cmdlist)
1131 (show_record_btrace_cmdlist): Remove redefinitions.
1133 2015-02-27 Tom Tromey <tromey@redhat.com>
1134 Pedro Alves <palves@redhat.com>
1136 * dwarf2-frame.c (enum cfa_how_kind, struct
1137 dwarf2_frame_state_reg_info): Move out of struct
1139 * dwarf2read.c (struct tu_stats): Move out of struct
1141 (struct file_entry): Move out of struct line_header.
1142 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
1143 typedef_field_list): Move out of struct field_info.
1144 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
1145 Move out of struct dynamic_prop.
1146 (union type_owner, union field_location, struct field, struct
1147 range_bounds, union type_specific): Move out of struct main_type.
1148 (struct fn_fieldlist, struct fn_field, struct typedef_field)
1149 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
1150 (struct call_site_target, union call_site_parameter_u, struct
1151 call_site_parameter): Move out of struct call_site.
1152 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
1154 (enum srcdest_kind): Move out of struct srcdest.
1155 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
1156 * prologue-value.h (enum prologue_value_kind): Move out of struct
1158 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
1160 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
1161 out of struct field_info.
1162 * symfile.h (struct other_sections): Move out of struct
1164 * symtab.c (struct symbol_cache_slot): Move out struct
1166 * target-descriptions.c (enum tdesc_type_kind): Move out of
1167 typedef struct tdesc_type.
1168 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
1169 struct tui_line_or_address.
1170 * value.c (enum internalvar_kind, union internalvar_data): Move
1171 out of struct internalvar.
1172 * xtensa-tdep.h (struct ctype_cache): Move out of struct
1175 2015-02-27 Tom Tromey <tromey@redhat.com>
1176 Pedro Alves <palves@redhat.com>
1178 Rename symbols whose names are reserved C++ keywords throughout.
1180 2015-02-27 Pedro Alves <palves@redhat.com>
1182 * Makefile.in (COMPILER): New, get it from autoconf.
1183 (COMPILE.pre, CC_LD): Use COMPILER.
1184 (CXX): Get from autoconf instead.
1185 (CXX_FOR_TARGET): Default to g++ instead of gcc.
1186 * acinclude.m4: Include build-with-cxx.m4.
1187 * build-with-cxx.m4: New file.
1188 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
1189 Disable -Werror by default if building in C++ mode.
1190 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
1191 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
1192 Run supported-warning-flags tests with the C++ compiler.
1193 Save/restore CXXFLAGS too.
1194 * configure: Regenerate.
1196 2015-02-27 Pedro Alves <palves@redhat.com>
1198 * libiberty.m4: New file.
1199 * acinclude.m4: Include libiberty.m4.
1200 * configure.ac: Call libiberty_INIT.
1201 * config.in, configure: Regenerate.
1203 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1205 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
1206 31-bit targets, but 64-bit targets as well.
1207 (s390_gnu_triplet_regexp): New function.
1208 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
1209 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
1212 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
1214 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
1215 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
1216 from CONTEXT_DEBUGGER.
1218 2015-02-26 Doug Evans <dje@google.com>
1220 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
1222 (set_type_vptr_fieldno): Ditto.
1223 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
1224 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
1226 2015-02-26 Pedro Alves <palves@redhat.com>
1228 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
1229 * complaints.c (vcomplaint): Pass argument FMT directly to
1230 printf-like functions instead of complaint->fmt.
1231 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
1232 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
1233 * compile/compile-loc2c.c (pushf, unary, binary): Add
1235 (do_compile_dwarf_expr_to_c): Pass string literal as format string
1237 (BINARY): Pass string literal as format string to 'binary'.
1238 * compile/compile-object-load.c (link_callbacks_einfo): Add
1240 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
1242 2015-02-26 Pedro Alves <palves@redhat.com>
1244 * windows-termcap.c: Rename to ...
1245 * stub-termcap.c: ... this. Adjust header line.
1246 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
1248 * configure: Regenerate.
1249 * configure.ac: Refer to stub-termcap.o instead of
1251 * gdb_curses.h: Mention stub-termcap.c instead of
1254 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1256 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
1257 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
1259 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
1261 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
1263 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1265 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
1266 bfd_canonicalize_symtab.
1268 2015-02-25 John Baldwin <jhb@FreeBSD.org>
1270 * amd64fbsd-nat.c: Include sys/user.h.
1271 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
1272 instead of KERN_PS_STRINGS to locate the signal trampoline.
1273 * i386fbsd-nat.c: Include sys/user.h.
1274 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
1275 instead of KERN_PS_STRINGS to locate the signal trampoline.
1276 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
1277 (amd64fbsd_sigtramp_p): New.
1278 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
1279 longer set default values.
1280 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
1281 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
1282 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
1283 (i386fbsd_freebsd4_sigtramp_start)
1284 (i386fbsd_freebsd4_sigtramp_middle)
1285 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
1286 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
1287 (i386fbsd_sigtramp_p): New.
1288 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
1289 longer set default values.
1290 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
1292 2015-02-25 John Baldwin <jhb@freebsd.org>
1294 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
1295 get_frame_register instead of frame_unwind_register_unsigned.
1297 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1300 * compile/compile-c-support.c (c_compute_program): Change // comment.
1301 * compile/compile-object-load.c (setup_sections): Change // comment.
1303 2015-02-26 Joel Brobecker <brobecker@adacore.com>
1306 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
1308 2015-02-23 Pedro Alves <palves@redhat.com>
1310 * remote.c (skip_to_semicolon): New function.
1311 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
1312 special case the stop reasons that look like hex numbers
1313 upfront. Instead handle real register numbers after matching
1314 all the known stop reasons.
1316 2015-02-21 Doug Evans <dje@google.com>
1318 PR c++/17976, symtab/17821
1319 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
1320 is_in_anonymous. All callers updated.
1321 (find_symbol_in_baseclass): Ditto.
1322 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
1323 for symbols in an anonymous namespace.
1324 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
1325 DW_AT_name directly.
1326 (dwarf2_name): Convert missing namespace name to
1327 CP_ANONYMOUS_NAMESPACE_STR.
1329 2015-02-20 Pedro Alves <palves@redhat.com>
1331 * linux-nat.c (linux_handle_extended_wait): Call
1332 thread_db_notice_clone whenever a new clone LWP is detected.
1333 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
1335 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
1336 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
1337 (linux_unstop_all_lwps): Declare.
1338 * linux-thread-db.c (struct thread_get_info_inout): Delete.
1339 (thread_get_info_callback): Delete.
1340 (thread_from_lwp): Use td_thr_get_info and record_thread.
1341 (thread_db_attach_lwp): Delete.
1342 (thread_db_notice_clone): New function.
1343 (try_thread_db_load_1): If /proc is mounted and shows the
1344 process'es task list, walk over all LWPs and call thread_from_lwp
1345 instead of relying on td_ta_thr_iter.
1346 (attach_thread): Don't call check_thread_signals here. Split the
1347 tail part of the function (which adds the thread to the core GDB
1349 (record_thread): ... this function. Call check_thread_signals
1351 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
1352 call thread_from_lwp.
1353 (thread_db_update_thread_list): Rename to ...
1354 (thread_db_update_thread_list_org): ... this.
1355 (thread_db_update_thread_list): New function.
1356 (thread_db_find_thread_from_tid): Delete.
1357 (thread_db_get_ada_task_ptid): Simplify.
1358 * nat/linux-procfs.c: Include <sys/stat.h>.
1359 (linux_proc_task_list_dir_exists): New function.
1360 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
1362 2015-02-20 Pedro Alves <palves@redhat.com>
1364 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
1365 main LWP. Handle the case of waitpid returning 0 if we're already
1366 attached to the LWP. Don't set the LWP's last_resume_kind to
1367 resume_stop if we already knew about the LWP.
1368 (linux_nat_filter_event): Add debug logs.
1370 2015-02-20 Pedro Alves <palves@redhat.com>
1372 * target.h (forward_target_decr_pc_after_break): Delete
1375 2015-02-20 Pedro Alves <palves@redhat.com>
1378 * linux-thread-db.c (thread_get_info_callback): Return early if
1379 the thread's lwp id is -1.
1381 2015-02-20 Joel Brobecker <brobecker@adacore.com>
1385 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
1387 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
1388 (dtrace_get_probes) Change type of variable 'dof'.
1390 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
1392 PR breakpoints/16812
1393 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
1394 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
1395 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
1397 2015-02-19 David Taylor <dtaylor@emc.com>
1399 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
1401 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
1403 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
1405 (tui_putc): Don't call tui_handle_resize_during_io.
1406 (tui_getc): Likewise.
1407 (tui_mld_getc): Likewise.
1408 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
1409 (tui_sigwinch_token): New static variable.
1410 (tui_initialize_win): Adjust documentation. Set
1412 (tui_async_resize_screen): New asynchronous callback.
1413 (tui_sigwinch_handler): Adjust documentation. Asynchronously
1414 invoke tui_async_resize_screen.
1416 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
1418 * configure: Regenerated.
1419 * configure.ac: Use GDB_AC_TRANSFORM.
1420 * Makefile.in (aclocal_m4_deps): Added transform.m4.
1421 * acinclude.m4: sinclude transform.m4.
1422 * transform.m4: New file.
1423 (GDB_AC_TRANSFORM): New macro.
1425 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1427 * NEWS: Announce the support for DTrace SDT probes.
1429 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1431 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
1432 (amd64_dtrace_parse_probe_argument): New function.
1433 (amd64_dtrace_probe_is_enabled): Likewise.
1434 (amd64_dtrace_enable_probe): Likewise.
1435 (amd64_dtrace_disable_probe): Likewise.
1436 (amd64_linux_init_abi): Register the
1437 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
1438 `gdbarch_dtrace_disable_probe' and
1439 `gdbarch_dtrace_probe_is_enabled' hooks.
1440 (amd64_dtrace_disabled_probe_sequence_1): New constant.
1441 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
1442 (amd64_dtrace_enable_probe_sequence): Likewise.
1443 (amd64_dtrace_disable_probe_sequence): Likewise.
1445 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1447 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
1448 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
1449 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
1451 * Makefile.in (SFILES): dtrace-probe.c added.
1452 * configure: Regenerate.
1453 * dtrace-probe.c: New file.
1454 (SHT_SUNW_dof): New constant.
1455 (dtrace_probe_type): New enum.
1456 (dtrace_probe_arg): New struct.
1457 (dtrace_probe_arg_s): New typedef.
1458 (struct dtrace_probe_enabler): New struct.
1459 (dtrace_probe_enabler_s): New typedef.
1460 (dtrace_probe): New struct.
1461 (dtrace_probe_is_linespec): New function.
1462 (dtrace_dof_sect_type): New enum.
1463 (dtrace_dof_dofh_ident): Likewise.
1464 (dtrace_dof_encoding): Likewise.
1465 (DTRACE_DOF_ENCODE_LSB): Likewise.
1466 (DTRACE_DOF_ENCODE_MSB): Likewise.
1467 (dtrace_dof_hdr): New struct.
1468 (dtrace_dof_sect): Likewise.
1469 (dtrace_dof_provider): Likewise.
1470 (dtrace_dof_probe): Likewise.
1471 (DOF_UINT): New macro.
1472 (DTRACE_DOF_PTR): Likewise.
1473 (DTRACE_DOF_SECT): Likewise.
1474 (dtrace_process_dof_probe): New function.
1475 (dtrace_process_dof): Likewise.
1476 (dtrace_build_arg_exprs): Likewise.
1477 (dtrace_get_arg): Likewise.
1478 (dtrace_get_probes): Likewise.
1479 (dtrace_get_probe_argument_count): Likewise.
1480 (dtrace_can_evaluate_probe_arguments): Likewise.
1481 (dtrace_evaluate_probe_argument): Likewise.
1482 (dtrace_compile_to_ax): Likewise.
1483 (dtrace_probe_destroy): Likewise.
1484 (dtrace_gen_info_probes_table_header): Likewise.
1485 (dtrace_gen_info_probes_table_values): Likewise.
1486 (dtrace_probe_is_enabled): Likewise.
1487 (dtrace_probe_ops): New variable.
1488 (info_probes_dtrace_command): New function.
1489 (_initialize_dtrace_probe): Likewise.
1490 (dtrace_type_name): Likewise.
1492 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1494 * gdbarch.sh (dtrace_parse_probe_argument): New.
1495 (dtrace_probe_is_enabled): Likewise.
1496 (dtrace_enable_probe): Likewise.
1497 (dtrace_disable_probe): Likewise.
1498 * gdbarch.c: Regenerate.
1499 * gdbarch.h: Regenerate.
1501 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1503 * stap-probe.c (stap_probe_ops): Add NULLs in the static
1504 stap_probe_ops for `enable_probe' and `disable_probe'.
1505 * probe.c (enable_probes_command): New function.
1506 (disable_probes_command): Likewise.
1507 (_initialize_probe): Define the cli commands `enable probe' and
1509 (parse_probe_linespec): New function.
1510 (info_probes_for_ops): Use parse_probe_linespec.
1511 * probe.h (probe_ops): New hooks `enable_probe' and
1514 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1516 * probe.c (compute_probe_arg): Moved from stap-probe.c
1517 (compile_probe_arg): Likewise.
1518 (probe_funcs): Likewise.
1519 * stap-probe.c (compute_probe_arg): Moved to probe.c.
1520 (compile_probe_arg): Likewise.
1521 (probe_funcs): Likewise.
1523 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1525 * probe.c (print_ui_out_not_applicables): New function.
1526 (exists_probe_with_pops): Likewise.
1527 (info_probes_for_ops): Do not include column headers for probe
1528 types for which no probe has been actually found on any object.
1529 Also invoke `print_ui_out_not_applicables' in order to match the
1530 column rows with the header when probes of several types are
1532 Print the "Type" column.
1533 * probe.h (probe_ops): Added a new probe operation `type_name'.
1534 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
1535 (stap_type_name): New function.
1537 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
1539 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
1540 (key_is_command_char): Delete.
1542 2015-02-17 Pedro Alves <palves@redhat.com>
1544 * tui/tui.c (tui_enable): Resize windows before anything
1545 might show a window.
1547 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
1550 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
1551 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
1553 * aarch64-tdep.h (tdesc_aarch64): Declare.
1555 2015-02-12 Mark Wielaard <mjw@redhat.com>
1557 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
1559 2015-02-13 Doug Evans <dje@google.com>
1561 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
1562 anonymous_namespace to is_in_anonymous for consistency with the rest
1564 (cp_lookup_bare_symbol): Fix typo in comment.
1565 (cp_search_static_and_baseclasses): Ditto.
1566 (search_symbol_list): Use vertical space in comment better.
1567 (reset_directive_searched): Ditto. Fix typo.
1568 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
1570 2015-02-13 Yao Qi <yao.qi@arm.com>
1572 * MAINTAINERS: Update my email address.
1574 2015-02-12 Doug Evans <dje@google.com>
1576 * symtab.c (completion_list_add_name): Fix memory leak.
1578 2015-02-12 Doug Evans <dje@google.com>
1580 * completer.c (complete_line): Remove incorrect comment.
1582 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1584 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
1585 (py_print_frame): Use RETURN_MASK_ERROR.
1587 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1589 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
1590 function comment. Wrap all function that can throw in cleanups.
1591 (gdbpy_apply_frame_filter): Wrap all function that can throw in
1594 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1596 * python/py-framefilter.c (py_print_frame): Substitute goto error.
1597 Remove the error label.
1599 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1601 * python/py-framefilter.c (py_print_frame): Put conditional code paths
1602 with goto first, indent the former else codepath left. Put variable
1603 'elided' to a new inner block.
1605 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1607 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
1609 2015-02-11 Pedro Alves <palves@redhat.com>
1611 * xcoffread.c (within_function): Delete.
1613 2015-02-11 Tom Tromey <tromey@redhat.com>
1614 Pedro Alves <palves@redhat.com>
1616 * breakpoint.c (base_breakpoint_ops): Delete.
1617 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
1618 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
1619 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
1620 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
1621 * python/py-arch.c (arch_object_type): Make extern.
1622 * python/py-block.c (block_syms_iterator_object_type): Make extern.
1623 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
1624 * python/py-cmd.c (cmdpy_object_type): Make extern.
1625 * python/py-continueevent.c (continue_event_object_type)
1626 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
1627 parameter. Update all callers.
1628 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
1629 * python/py-exitedevent.c (exited_event_object_type): Make extern.
1630 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
1631 * python/py-function.c (fnpy_object_type): Make extern.
1632 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
1633 * python/py-infevents.c (call_pre_event_object_type)
1634 (inferior_call_post_event_object_type).
1635 (memory_changed_event_object_type): Make extern.
1636 * python/py-infthread.c (thread_object_type): Make extern.
1637 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
1638 * python/py-linetable.c (linetable_entry_object_type)
1639 (linetable_object_type, ltpy_iterator_object_type): Make extern.
1640 * python/py-newobjfileevent.c (new_objfile_event_object_type)
1641 (clear_objfiles_event_object_type): Make extern.
1642 * python/py-objfile.c (objfile_object_type): Make extern.
1643 * python/py-param.c (parmpy_object_type): Make extern.
1644 * python/py-progspace.c (pspace_object_type): Make extern.
1645 * python/py-signalevent.c (signal_event_object_type): Make extern.
1646 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
1647 * python/py-type.c (type_object_type, field_object_type)
1648 (type_iterator_object_type): Make extern.
1649 * python/python.c (python_extension_script_ops)
1650 (python_extension_ops): Make extern.
1651 * stap-probe.c (stap_probe_ops): Make extern.
1653 2015-02-11 Pedro Alves <pedro@codesourcery.com>
1655 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
1656 because the event thread is not the current thread.
1658 2015-02-11 Doug Evans <xdje42@gmail.com>
1660 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
1661 been initialized yet, return NULL.
1663 2015-02-11 Doug Evans <dje@google.com>
1665 * symfile.h (new_symfile_objfile): Delete.
1666 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
1667 All callers updated.
1669 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
1671 * tui/tui-io.c (tui_handle_resize_during_io): Call
1672 tui_update_gdb_sizes() after resizing the screen.
1673 * tui/tui.c (tui_enable): Resize the terminal before
1674 calling tui_update_gdb_sizes().
1676 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
1678 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
1679 line before printing a newline.
1681 2015-02-11 Mark Wielaard <mjw@redhat.com>
1683 * utils.c (producer_is_gcc): Return true or false.
1685 2015-02-10 Mark Wielaard <mjw@redhat.com>
1687 * utils.h (producer_is_gcc): Change return type to bool. Add major
1689 * utils.c (producer_is_gcc): Likewise.
1690 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
1691 * dwarf2read.c (check_producer): Likewise.
1693 2015-02-10 Pedro Alves <palves@redhat.com>
1695 * infrun.c (displaced_step_fixup): Switch to the event thread
1696 before calling gdbarch_displaced_step_fixup.
1698 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
1700 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
1702 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
1704 * ada-varobj.c (ada_name_of_child): Constify parent.
1705 (ada_path_expr_of_child): Same.
1706 (ada_value_of_child): Same.
1707 (ada_type_of_child): Same.
1708 * c-varobj.c (c_is_path_expr_parent): Same.
1709 (c_describe_child): Same.
1710 (c_name_of_child): Same.
1711 (c_value_of_child): Same.
1712 (c_type_of_child): Same.
1713 (cplus_number_of_children): Same.
1714 (cplus_describe_child): Constify var.
1715 (cplus_name_of_child): Constify parent.
1716 (cplus_value_of_child): Same.
1717 (cplus_type_of_child): Same.
1718 * jv-varobj.c (java_name_of_child): Same.
1719 (java_value_of_child): Same.
1720 (java_type_of_child): Same.
1721 * varobj.c (value_of_child): Same.
1722 (varobj_default_is_path_expr_parent): Constify var, parent and return
1724 (varobj_get_path_expr): Constify var, modify path_expr through
1726 (install_new_value): Constify parent.
1727 (value_of_child): Constify parent.
1728 * varobj.h (struct varobj): Constify parent.
1729 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
1731 (varobj_get_path_expr): Constify var.
1732 (varobj_get_path_expr_parent): Constify var and return value.
1734 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
1736 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
1737 (arm_prologue_this_id): Move PC and SP limit checks to
1738 arm_prologue_unwind_stop_reason.
1739 (arm_prologue_unwind) <stop_reason> : Set to
1740 arm_prologue_unwind_stop_reason.
1742 2015-02-09 Mark Wielaard <mjw@redhat.com>
1744 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
1745 DW_LANG_Fortran08 as language_fortran.
1747 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
1750 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
1751 of pointer against char.
1753 2015-02-09 Mark Wielaard <mjw@redhat.com>
1755 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
1756 (c_type_print_modifier): Likewise.
1757 * dwarf2read.c (read_tag_atomic_type): New function.
1758 (read_type_die_1): Handle DW_TAG_atomic_type.
1759 * gdbtypes.c (make_atomic_type): New function.
1760 (recursive_dump_type): Handle TYPE_ATOMIC.
1761 * gdbtypes.h (enum type_flag_values): Renumber.
1762 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
1763 (TYPE_ATOMIC): New macro.
1764 (make_atomic_type): Declare.
1766 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1768 * btrace.c (ftrace_find_call): Skip gaps.
1769 (ftrace_new_function): Initialize level.
1770 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
1771 (ftrace_new_switch): Update
1773 (ftrace_new_gap): New.
1774 (ftrace_update_function): Create new function after gap.
1775 (btrace_compute_ftrace_bts): Create gap on error.
1776 (btrace_stitch_bts): Update parameters. Clear trace if it
1778 (btrace_stitch_trace): Update parameters. Update callers.
1779 (btrace_clear): Reset the number of gaps.
1780 (btrace_insn_get): Return NULL if the iterator points to a gap.
1781 (btrace_insn_number): Return zero if the iterator points to a gap.
1782 (btrace_insn_end): Allow gaps at the end.
1783 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
1784 (btrace_find_insn_by_number): Assert that the found iterator does
1786 (btrace_call_next, btrace_call_prev): Assert that the last function
1788 * btrace.h (btrace_bts_error): New.
1789 (btrace_function): Update comment.
1790 (btrace_function) <insn, insn_offset, number>: Update comment.
1791 (btrace_function) <errcode>: New.
1792 (btrace_thread_info) <ngaps>: New.
1793 (btrace_thread_info) <replay>: Update comment.
1794 (btrace_insn_get): Update comment.
1795 * record-btrace.c (btrace_ui_out_decode_error): New.
1796 (record_btrace_info): Print number of gaps.
1797 (btrace_insn_history, btrace_call_history): Call
1798 btrace_ui_out_decode_error for gaps.
1799 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
1801 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1803 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
1804 * nat/linux-btrace.c: (btrace_this_cpu): New.
1805 (cpu_supports_bts): Call btrace_this_cpu.
1806 (intel_supports_bts): Add cpu parameter.
1808 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1810 * btrace.h (btrace_insn_class): New.
1811 (btrace_insn) <size, iclass>: New.
1812 * btrace.c (ftrace_find_call): Update parameters. Update users.
1813 Use instruction classification.
1814 (ftrace_new_return): Update parameters. Update users.
1815 (ftrace_update_function): Update parameters. Update users. Use
1816 instruction classification.
1817 (ftrace_update_insns): Update parameters. Update users.
1818 (ftrace_classify_insn): New.
1819 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
1820 TRY_CATCH around call to gdb_insn_length.
1822 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1824 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
1825 Update parameters. Update users.
1827 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1829 * btrace.c (parse_xml_btrace_conf_bts): Add size.
1830 (btrace_conf_bts_attributes): New.
1831 (btrace_conf_children): Add attributes.
1832 * common/btrace-common.h (btrace_config_bts): New.
1833 (btrace_config)<bts>: New.
1834 (btrace_config): Update comment.
1835 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
1837 * features/btrace-conf.dtd: Increment version. Add size
1838 attribute to bts element.
1839 * record-btrace.c (set_record_btrace_bts_cmdlist,
1840 show_record_btrace_bts_cmdlist): New.
1841 (record_btrace_adjust_size, record_btrace_print_bts_conf,
1842 record_btrace_print_conf, cmd_set_record_btrace_bts,
1843 cmd_show_record_btrace_bts): New.
1844 (record_btrace_info): Call record_btrace_print_conf.
1845 (_initialize_record_btrace): Add commands.
1846 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
1847 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
1848 (btrace_sync_conf): Synchronize bts size.
1849 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
1850 * NEWS: Announce new commands and new packets.
1852 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1854 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
1855 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
1856 (x86_linux_btrace_conf): New.
1857 (x86_linux_create_target): Initialize to_btrace_conf.
1858 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
1859 Check format. Split into this and ...
1860 (linux_enable_bts): ... this.
1861 (linux_btrace_conf): New.
1862 (perf_event_skip_record): Renamed into ...
1863 (perf_event_skip_bts_record): ... this. Updated users.
1864 (linux_disable_btrace): Split into this and ...
1865 (linux_disable_bts): ... this.
1866 (linux_read_btrace): Check format.
1867 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
1868 (linux_btrace_conf): New.
1869 (btrace_target_info)<ptid>: Moved.
1870 (btrace_target_info)<conf>: New.
1871 (btrace_target_info): Split into this and ...
1872 (btrace_tinfo_bts): ... this. Updated users.
1873 * btrace.c (btrace_enable): Update parameters.
1874 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
1875 (btrace_conf_children, btrace_conf_attributes)
1876 (btrace_conf_elements): New.
1877 * btrace.h (btrace_enable): Update parameters.
1878 (btrace_conf, parse_xml_btrace_conf): New.
1879 * common/btrace-common.h (btrace_config): New.
1880 * feature/btrace-conf.dtd: New.
1881 * record-btrace.c (record_btrace_conf): New.
1882 (record_btrace_cmdlist): New.
1883 (record_btrace_enable_warn, record_btrace_open): Pass
1884 &record_btrace_conf.
1885 (record_btrace_info): Print recording format.
1886 (cmd_record_btrace_bts_start): New.
1887 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
1888 (_initialize_record_btrace): Add "record btrace bts" subcommand.
1889 Add "record bts" alias command.
1890 * remote.c (remote_state)<btrace_config>: New.
1891 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
1892 (remote_protocol_features): Add qXfer:btrace-conf:read.
1893 (remote_open_1): Call remote_btrace_reset.
1894 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
1895 (btrace_target_info)<conf>: New.
1896 (btrace_sync_conf, btrace_read_config): New.
1897 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
1899 (remote_btrace_conf): New.
1900 (init_remote_ops): Initialize to_btrace_conf.
1901 (_initialize_remote): Add qXfer:btrace-conf packet.
1902 * target.c (target_enable_btrace): Update parameters.
1903 (target_btrace_conf): New.
1904 * target.h (target_enable_btrace): Update parameters.
1905 (target_btrace_conf): New.
1906 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
1907 (target_ops)<to_enable_btrace>: Update parameters and comment.
1908 (target_ops)<to_btrace_conf>: New.
1909 * target-delegates: Regenerate.
1910 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
1911 (target_debug_print_const_struct_btrace_target_info_p): New.
1912 * NEWS: Announce new command and new packet.
1914 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1916 * nat/linux-btrace.h (perf_event_buffer): New.
1917 (btrace_target_info) <buffer, size, data_head>: Replace with ...
1919 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
1920 (perf_event_buffer_size, perf_event_buffer_begin)
1921 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
1923 (perf_event_new_data): New.
1925 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1927 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
1928 * record-btrace.c (record_btrace_open): Remove call to
1929 target_supports_btrace.
1930 * remote.c (remote_supports_btrace): Update parameters.
1931 * target.c (target_supports_btrace): Update parameters.
1932 * target.h (to_supports_btrace, target_supports_btrace): Update
1934 * target-delegates.c: Regenerate.
1935 * target-debug.h (target_debug_print_enum_btrace_format): New.
1936 * nat/linux-btrace.c
1937 (kernel_supports_btrace): Rename into ...
1938 (kernel_supports_bts): ... this. Update users. Update warning text.
1939 (intel_supports_btrace): Rename into ...
1940 (intel_supports_bts): ... this. Update users.
1941 (cpu_supports_btrace): Rename into ...
1942 (cpu_supports_bts): ... this. Update users.
1943 (linux_supports_btrace): Update parameters. Split into this and ...
1944 (linux_supports_bts): ... this.
1945 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
1947 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1949 * Makefile.in (SFILES): Add common/btrace-common.c.
1950 (COMMON_OBS): Add common/btrace-common.o.
1951 (btrace-common.o): Add build rules.
1952 * btrace.c (parse_xml_btrace): Update parameters.
1953 (parse_xml_btrace_block): Set format field.
1954 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
1955 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
1956 (btrace_compute_ftrace): Split into this and...
1957 (btrace_compute_ftrace_bts): ...this.
1958 (btrace_stitch_trace): Split into this and...
1959 (btrace_stitch_bts): ...this.
1960 * btrace.h (parse_xml_btrace): Update parameters.
1961 (make_cleanup_btrace_data): New.
1962 * common/btrace-common.c: New.
1963 * common/btrace-common.h: Include common-defs.h.
1964 (btrace_block_s): Update comment.
1965 (btrace_format): New.
1966 (btrace_format_string): New.
1967 (btrace_data_bts): New.
1969 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
1970 * remote.c (remote_read_btrace): Update parameters.
1971 * target.c (target_read_btrace): Update parameters.
1972 * target.h (target_read_btrace): Update parameters.
1973 (target_ops)<to_read_btrace>: Update parameters.
1974 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
1975 * target-delegates.c: Regenerate.
1976 * target-debug (target_debug_print_struct_btrace_data_p): New.
1977 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
1978 (linux_read_bts): ...this.
1979 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
1981 2015-02-06 Doug Evans <dje@google.com>
1983 * remote-m32r-sdi.c: Include symfile.h.
1985 2015-02-06 Doug Evans <dje@google.com>
1987 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
1988 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
1991 2015-02-06 Pedro Alves <palves@redhat.com>
1993 * linux-thread-db.c (find_new_threads_callback): Add debug output.
1995 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
1998 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
1999 (enable_count_command): Check args for NULL value.
2001 2015-02-05 Doug Evans <xdje42@gmail.com>
2003 * guile/scm-frame.c: Fix spelling errors in a comment.
2005 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2007 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
2008 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
2011 2015-02-04 Pedro Alves <palves@redhat.com>
2013 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
2014 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
2016 (resume_stopped_resumed_lwps): Don't check whether the thread is
2017 marked as executing.
2018 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
2020 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2022 * regset.h (struct regset): Add flags field.
2023 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
2024 * corelow.c (get_core_register_section): Add warning if the size
2025 exceeds the requested size and the regset does not have the
2026 REGSET_VARIABLE_SIZE flag set.
2027 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
2029 * armbsd-tdep.c (armbsd_gregset): Likewise.
2030 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
2031 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
2032 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
2033 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
2035 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2037 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
2038 For ".reg-xstate", explicitly specify the requested section size
2039 via X86_XSTATE_SIZE instead of just 0 on input and
2040 X86_XSTATE_MAX_SIZE on output.
2041 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
2044 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2047 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
2048 function type, particularly its SIZE parameter.
2049 * gdbarch.h: Regenerate.
2050 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
2051 actual against required size using ">=" instead of "==".
2052 (amd64_collect_fpregset): Likewise.
2053 * i386-tdep.c (i386_supply_gregset): Likewise.
2054 (i386_collect_gregset): Likewise.
2055 (i386_supply_fpregset): Likewise.
2056 (i386_collect_fpregset): Likewise.
2057 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
2058 (mips_fill_gregset_wrapper): Likewise.
2059 (mips_supply_fpregset_wrapper): Likewise.
2060 (mips_fill_fpregset_wrapper): Likewise.
2061 (mips64_supply_gregset_wrapper): Likewise.
2062 (mips64_fill_gregset_wrapper): Likewise.
2063 (mips64_supply_fpregset_wrapper): Likewise.
2064 (mips64_fill_fpregset_wrapper): Likewise.
2065 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
2066 (am33_supply_fpregset_method): Likewise.
2067 (am33_collect_gregset_method): Likewise.
2068 (am33_collect_fpregset_method): Likewise.
2070 2015-02-04 Doug Evans <dje@google.com>
2071 Pedro Alves <palves@redhat.com>
2072 Eli Zaretskii <eliz@gnu.org>
2075 * tui/tui-command.c (tui_refresh_cmd_win): New function.
2076 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
2077 * tui/tui-file.c: #include tui/tui-command.h.
2078 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
2079 (tui_file_flush): Refresh command window if stream is gdb_stdout.
2080 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
2082 2015-02-04 Pedro Alves <palves@redhat.com>
2085 * event-loop.c (gdb_do_one_event): Add default switch case.
2087 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2089 Filter out inferior gcc option -fpreprocessed.
2090 * compile/compile.c (filter_args): New function.
2093 2015-02-03 Pedro Alves <palves@redhat.com>
2095 * event-loop.c: Don't declare nor define a queue type for
2097 (event_queue): Delete.
2098 (create_event, create_file_event, gdb_event_xfree)
2099 (initialize_event_loop, process_event): Delete.
2100 (gdb_do_one_event): Return as soon as one event is handled.
2101 (handle_file_event): Change prototype. Used the passed in
2102 file_handler pointer and ready_mask instead of looping over all
2104 (gdb_wait_for_event): Update the poll/select timeouts before
2105 blocking. Run event handlers directly instead of queueing events.
2106 Return as soon as one event is handled.
2107 (struct async_event_handler_data): Delete.
2108 (invoke_async_event_handler): Delete.
2109 (check_async_event_handlers): Change return type to int. Run
2110 event handlers directly instead of queueing events. Return as
2111 soon as one event is handled.
2112 (handle_timer_event): Delete.
2113 (update_wait_timeout): New function, factored out from
2115 (poll_timers): Reimplement.
2116 * event-loop.h (initialize_event_loop): Delete declaration.
2117 * top.c (gdb_init): Don't call initialize_event_loop.
2119 2015-02-03 Pedro Alves <palves@redhat.com>
2121 * event-loop.c (clear_async_event_handler): New function.
2122 * event-loop.h (clear_async_event_handler): New declaration.
2123 * record-btrace.c (record_btrace_async): New function.
2124 (init_record_btrace_ops): Install record_btrace_async.
2125 * record-full.c (record_full_async): New function.
2126 (record_full_resume): Don't mark the async event source here.
2127 (init_record_full_ops): Install record_full_async.
2128 (record_full_core_resume): Don't mark the async event source here.
2129 (init_record_full_core_ops): Install record_full_async.
2130 * remote.c (remote_async): Mark and clear the async stop reply
2131 queue event-loop token as appropriate.
2133 2015-02-03 Pedro Alves <palves@redhat.com>
2135 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
2136 target_is_async_p instead of target_can_async.
2137 (linux_nat_wait): Use target_is_async_p instead of
2138 target_can_async. Don't enable async here.
2139 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
2140 target_is_async_p instead of target_can_async.
2142 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
2144 * varobj.h (lang_varobj_ops): Mention which return values need
2147 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2149 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
2151 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2154 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
2155 results found in the cache.
2157 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2160 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
2161 when allocating a new one.
2163 2015-02-01 Tom Tromey <tom@tromey.com>
2165 * MAINTAINERS: Remove myself.
2167 2015-01-31 Doug Evans <xdje42@gmail.com>
2169 * dwarf2read.c (process_structure_scope): Update setting of
2170 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
2171 * gdbtypes.c (internal_type_vptr_fieldno): New function.
2172 (set_type_vptr_fieldno): New function.
2173 (internal_type_vptr_basetype): New function.
2174 (set_type_vptr_basetype): New function.
2175 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
2177 (allocate_cplus_struct_type): Initialize vptr_fieldno.
2178 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
2179 (print_cplus_stuff): ... moved here.
2180 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
2181 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
2183 (struct cplus_struct_type): ... here. All uses updated.
2184 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
2185 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
2186 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
2187 * stabsread.c (read_tilde_fields): Update setting of
2188 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
2190 2015-01-31 Doug Evans <xdje42@gmail.com>
2192 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
2194 (cp_print_class_member): Rename local domain to self_type.
2195 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
2196 domain_type to self_type.
2197 (set_die_type) <need_gnat_info>: Handle
2198 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
2199 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
2200 TYPE_SPECIFIC_SELF_TYPE.
2201 * gdbtypes.c (internal_type_self_type): New function.
2202 (set_type_self_type): New function.
2203 (smash_to_memberptr_type): Rename parameter domain to self_type.
2204 Update setting of TYPE_SELF_TYPE.
2205 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
2206 (smash_to_method_type): Rename parameter domain to self_type.
2207 Update setting of TYPE_SELF_TYPE.
2208 (check_stub_method): Call smash_to_method_type.
2209 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
2210 (copy_type_recursive): Ditto.
2211 * gdbtypes.h (enum type_specific_kind): New value
2212 TYPE_SPECIFIC_SELF_TYPE.
2213 (struct main_type) <type_specific>: New member self_type.
2214 (struct cplus_struct_type) <fn_field.type>: Update comment.
2215 (TYPE_SELF_TYPE): Rewrite.
2216 (internal_type_self_type, set_type_self_type): Declare.
2217 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
2219 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
2220 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
2222 * stabsread.c (read_member_functions): Mark methods with
2223 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
2226 2015-01-31 Doug Evans <xdje42@gmail.com>
2228 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
2231 2015-01-31 Doug Evans <xdje42@gmail.com>
2233 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
2234 or unions. Return zero if union.
2235 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
2236 (gnuv3_rtti_type): Pass already-check_typedef'd value to
2238 (compute_vtable_size): Assert only passed structs.
2239 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
2241 2015-01-31 Doug Evans <xdje42@gmail.com>
2243 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
2246 2015-01-31 Gary Benson <gbenson@redhat.com>
2247 Doug Evans <dje@google.com>
2252 * cli/cli-cmds.c (complete_command): Notify user if max-completions
2254 * common/common-exceptions.h (enum errors)
2255 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
2256 * completer.h (get_max_completions_reached_message): New declaration.
2257 (max_completions): Likewise.
2258 (completion_tracker_t): New typedef.
2259 (new_completion_tracker): New declaration.
2260 (make_cleanup_free_completion_tracker): Likewise.
2261 (maybe_add_completion_enum): New enum.
2262 (maybe_add_completion): New declaration.
2263 (throw_max_completions_reached_error): Likewise.
2264 * completer.c (max_completions): New global variable.
2265 (new_completion_tracker): New function.
2266 (free_completion_tracker): Likewise.
2267 (make_cleanup_free_completion_tracker): Likewise.
2268 (maybe_add_completions): Likewise.
2269 (throw_max_completions_reached_error): Likewise.
2270 (complete_line): Remove duplicates and limit result to max_completions
2272 (get_max_completions_reached_message): New function.
2273 (gdb_display_match_list): Handle max_completions.
2274 (_initialize_completer): New declaration and function.
2275 * symtab.c: Include completer.h.
2276 (completion_tracker): New static variable.
2277 (completion_list_add_name): Call maybe_add_completion.
2278 (default_make_symbol_completion_list_break_on_1): Renamed from
2279 default_make_symbol_completion_list_break_on. Maintain
2280 completion_tracker across calls to completion_list_add_name.
2281 (default_make_symbol_completion_list_break_on): New function.
2282 * top.c (init_main): Set rl_completion_display_matches_hook.
2283 * tui/tui-io.c: Include completer.h.
2284 (tui_old_rl_display_matches_hook): New static global.
2285 (tui_rl_display_match_list): Notify user if max-completions reached.
2286 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
2287 * NEWS (New Options): Mention set/show max-completions.
2289 2015-01-31 Gary Benson <gbenson@redhat.com>
2291 * symtab.c (struct add_name_data) <code>: New field.
2293 (add_symtab_completions): New function.
2294 (symtab_expansion_callback): Likewise.
2295 (default_make_symbol_completion_list_break_on): Set datum.code.
2296 Move minimal symbol scan before calling expand_symtabs_matching.
2297 Scan known primary symtabs for externs and statics before calling
2298 expand_symtabs_matching. Pass symtab_expansion_callback as
2299 expansion_notify argument to expand_symtabs_matching. Do not scan
2300 primary symtabs for externs and statics after calling
2301 expand_symtabs_matching.
2303 2015-01-31 Gary Benson <gbenson@redhat.com>
2305 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
2306 (struct quick_symbol_functions) <expand_symtabs_matching>:
2307 New argument expansion_notify. All uses updated.
2308 (expand_symtabs_matching): New argument expansion_notify.
2310 * symfile-debug.c (debug_qf_expand_symtabs_matching):
2311 Also print expansion notify.
2312 * symtab.c (expand_symtabs_matching_via_partial): Call
2313 expansion_notify whenever a partial symbol table is expanded.
2314 * dwarf2read.c (dw2_expand_symtabs_matching): Call
2315 expansion_notify whenever a symbol table is instantiated.
2317 2015-01-31 Doug Evans <xdje42@gmail.com>
2319 * cli-out.c: #include completer.h, readline/readline.h.
2320 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
2321 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
2322 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
2323 * cli-out.h (cli_display_match_list): Declare.
2324 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
2325 (ELLIPSIS_LEN): Ditto.
2326 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
2327 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
2328 (gdb_fnprint, gdb_print_filename): Ditto.
2329 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
2330 (gdb_display_match_list): Ditto.
2331 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
2332 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
2333 (mld_beep_ftype, mld_read_key_ftype): Ditto.
2334 (match_list_displayer): New struct.
2335 (gdb_display_match_list): Declare.
2336 * top.c (init_main): Set rl_completion_display_matches_hook.
2337 * tui/tui-io.c: #include completer.h.
2338 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
2339 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
2340 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
2341 (tui_mld_getc, tui_mld_read_key): Ditto.
2342 (tui_rl_display_match_list): Rewrite.
2343 (tui_handle_resize_during_io): New arg for_completion. All callers
2346 2015-01-31 Doug Evans <xdje42@gmail.com>
2348 Add symbol lookup cache.
2349 * NEWS: Document new options and commands.
2350 * symtab.c (symbol_cache_key): New static global.
2351 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
2352 (SYMBOL_LOOKUP_FAILED): New macro.
2353 (symbol_cache_slot_state): New enum.
2354 (block_symbol_cache): New struct.
2355 (symbol_cache): New struct.
2356 (new_symbol_cache_size, symbol_cache_size): New static globals.
2357 (hash_symbol_entry, eq_symbol_entry): New functions.
2358 (symbol_cache_byte_size, resize_symbol_cache): New functions.
2359 (make_symbol_cache, free_symbol_cache): New functions.
2360 (get_symbol_cache, symbol_cache_cleanup): New function.
2361 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
2362 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
2363 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
2364 (symbol_cache_flush, symbol_cache_dump): New functions.
2365 (maintenance_print_symbol_cache): New function.
2366 (maintenance_flush_symbol_cache): New function.
2367 (symbol_cache_stats): New function.
2368 (maintenance_print_symbol_cache_statistics): New function.
2369 (symtab_new_objfile_observer): New function.
2370 (symtab_free_objfile_observer): New function.
2371 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
2372 (_initialize_symtab): Init symbol_cache_key. New parameter
2373 maint symbol-cache-size. New maint commands print symbol-cache,
2374 print symbol-cache-statistics, flush-symbol-cache.
2375 Install new_objfile, free_objfile observers.
2377 2015-01-31 Joel Brobecker <brobecker@adacore.com>
2380 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
2383 2015-01-31 Doug Evans <xdje42@gmail.com>
2385 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
2386 * auto-load.c: #include ctype.h.
2387 (struct auto_load_pspace_info): Replace member loaded_scripts with
2388 new members loaded_script_files, loaded_script_texts.
2389 (auto_load_pspace_data_cleanup): Update.
2390 (init_loaded_scripts_info): Update.
2391 (get_auto_load_pspace_data_for_loading): Update.
2392 (maybe_add_script_file): Renamed from maybe_add_script. All callers
2394 (maybe_add_script_text): New function.
2395 (clear_section_scripts): Update.
2396 (source_script_file, execute_script_contents): New functions.
2397 (source_section_scripts): Add support for
2398 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
2399 (print_scripts): New function.
2400 (auto_load_info_scripts): Also print inlined scripts.
2401 (maybe_print_unsupported_script_warning): Renamed from
2402 unsupported_script_warning_print. All callers updated.
2403 (maybe_print_script_not_found_warning): Renamed from
2404 script_not_found_warning_print. All callers updated.
2405 * extension-priv.h (struct extension_language_script_ops): New member
2406 objfile_script_executor.
2407 * extension.c (ext_lang_objfile_script_executor): New function.
2408 * extension.h (objfile_script_executor_func): New typedef.
2409 (ext_lang_objfile_script_executor): Declare.
2410 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
2411 * guile/guile.c (guile_extension_script_ops): Update.
2412 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
2413 * python/python.c (python_extension_script_ops): Update.
2414 (gdbpy_execute_objfile_script): New function.
2416 2015-01-31 Eli Zaretskii <eliz@gnu.org>
2418 * tui/tui-io.c (tui_expand_tabs): New function.
2419 (tui_puts, tui_redisplay_readline): Expand TABs into the
2420 appropriate number of spaces.
2421 * tui/tui-regs.c: Include tui-io.h.
2422 (tui_register_format): Call tui_expand_tabs to expand TABs into
2423 the appropriate number of spaces.
2424 * tui/tui-io.h: Add prototype for tui_expand_tabs.
2426 2015-01-30 Doug Evans <dje@google.com>
2428 * NEWS: "info source" command now display producer string if present.
2429 * source.c (source_info): Print producer string if present.
2431 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2433 * varobj.c (varobj_delete): Fix comment.
2435 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2437 * varobj.c (create_child): Modify comment.
2439 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2441 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
2443 (ada_name_of_variable): Same.
2444 (ada_path_expr_of_child): Same.
2445 (ada_value_of_variable): Same.
2446 (ada_value_is_changeable_p): Same.
2447 (ada_value_has_mutated): Same.
2448 * c-varobj.c (varobj_is_anonymous_child): Same.
2449 (c_is_path_expr_parent): Same.
2450 (c_number_of_children): Same.
2451 (c_name_of_variable): Same.
2452 (c_path_expr_of_child): Same.
2454 (c_value_of_variable): Same.
2455 (cplus_number_of_children): Same.
2456 (cplus_name_of_variable): Same.
2457 (cplus_path_expr_of_child): Same.
2458 (cplus_value_of_variable): Same.
2459 * jv-varobj.c (java_number_of_children): Same.
2460 (java_name_of_variable): Same.
2461 (java_path_expr_of_child): Same.
2462 (java_value_of_variable): Same.
2463 * varobj.c (number_of_children): Same.
2464 (name_of_variable): Same.
2466 (varobj_ensure_python_env): Same.
2467 (varobj_get_objname): Same.
2468 (varobj_get_expression): Same.
2469 (varobj_get_display_format): Same.
2470 (varobj_get_display_hint): Same.
2471 (varobj_has_more): Same.
2472 (varobj_get_thread_id): Same.
2473 (varobj_get_frozen): Same.
2474 (dynamic_varobj_has_child_method): Same.
2475 (varobj_get_gdb_type): Same.
2476 (is_path_expr_parent): Same.
2477 (varobj_default_is_path_expr_parent): Same.
2478 (varobj_get_language): Same.
2479 (varobj_get_attributes): Same.
2480 (varobj_is_dynamic_p): Same.
2481 (varobj_get_child_range): Same.
2482 (varobj_value_has_mutated): Same.
2483 (varobj_get_value_type): Same.
2484 (number_of_children): Same.
2485 (name_of_variable): Same.
2486 (check_scope): Same.
2487 (varobj_editable_p): Same.
2488 (varobj_value_is_changeable_p): Same.
2489 (varobj_floating_p): Same.
2490 (varobj_default_value_is_changeable_p): Same.
2492 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2494 * varobj.c (varobj_get_path_expr): Set var->path_expr.
2495 * c-varobj.c (c_path_expr_of_child): Set local var instead of
2497 (cplus_path_expr_of_child): Same.
2499 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2501 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
2503 (mi_cmd_var_info_expression): Same.
2504 * varobj.c (varobj_get_expression): Mention in the comment that
2505 the result must by freed by the caller.
2507 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2509 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
2511 (varobj_update_one): Same.
2512 * varobj.c (update_type_if_necessary): Free curr_type_str and
2514 (varobj_get_type): Specify in comment that the result needs to be
2515 freed by the caller.
2517 2015-01-29 Doug Evans <dje@google.com>
2520 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
2522 2015-01-25 Mark Wielaard <mjw@redhat.com>
2524 * dwarf2read.c (checkproducer): Call producer_is_gcc.
2525 * utils.c (producer_is_gcc_ge_4): Likewise.
2526 (producer_is_gcc): New function.
2527 * utils.h (producer_is_gcc): New declaration.
2529 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2531 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
2533 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
2534 parameter by "addr_stack" parameter.
2535 (resolve_dynamic_range): Replace "addr" parameter by
2536 "stack_addr" parameter. Update function documentation.
2537 Update code accordingly.
2538 (resolve_dynamic_array, resolve_dynamic_union)
2539 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
2540 (resolve_dynamic_type): Update code, following the changes made
2541 to resolve_dynamic_type_internal's interface.
2542 * dwarf2loc.h (struct property_addr_info): New.
2543 (dwarf2_evaluate_property): Replace "address" parameter
2544 by "addr_stack" parameter. Adjust function documentation.
2545 (struct dwarf2_offset_baton): New.
2546 (struct dwarf2_property_baton): Update documentation of
2547 field "referenced_type" to be more general. New field
2548 "offset_info" in union data field.
2549 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
2550 parameter by "addr_stack" parameter. Adjust code accordingly.
2551 Add support for PROP_ADDR_OFFSET properties.
2552 * dwarf2read.c (attr_to_dynamic_prop): Add support for
2553 DW_AT_data_member_location attributes as well. Use case
2554 statements instead of if/else condition.
2556 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2558 * ada-varobj.c (ada_varobj_get_array_number_of_children):
2559 Return zero if PARENT_VALUE is NULL and parent_type's
2560 range type is dynamic.
2562 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2564 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
2565 nonzero if the type's subtype is dynamic.
2566 (resolve_dynamic_range): Also resolve the range's subtype.
2568 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
2570 Pushed by Joel Brobecker <brobecker@adacore.com>.
2571 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
2573 2015-01-27 Doug Evans <dje@google.com>
2575 * NEWS: Mention gdb.Objfile.username.
2576 * python/py-objfile.c (objfpy_get_username): New function.
2577 (objfile_getset): Add "username".
2579 2015-01-24 Mark Wielaard <mjw@redhat.com>
2581 * stack.c (return_command): Markup warning message with _.
2583 2015-01-24 Doug Evans <xdje42@gmail.com>
2585 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
2587 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
2589 Fix 100x slowdown regression on DWZ files.
2590 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
2591 (struct line_header): Add offset and offset_in_dwz.
2592 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
2593 (free_line_header_voidp): New declaration.
2594 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
2596 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
2597 (handle_DW_AT_stmt_list): Use line_header_hash.
2598 (free_line_header_voidp): New function.
2599 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
2600 (dwarf_decode_lines): New parameter decode_mapping, use it.
2601 (dwarf2_free_objfile): Free line_header_hash.
2603 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
2606 * valops.c (value_rtti_indirect_type): Catch exception thrown by
2609 2015-01-15 Mark Wielaard <mjw@redhat.com>
2611 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
2613 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
2614 calling_convention an 8 bit bit field.
2615 (TYPE_NO_RETURN): New macro.
2616 * infcmd.c (finish_command): Query if function does not return
2618 * stack.c (return_command): Likewise.
2620 2015-01-23 Pedro Alves <palves@redhat.com>
2622 * linux-nat.c (linux_is_async_p): New macro.
2623 (linux_nat_is_async_p):
2624 (linux_nat_terminal_inferior): Check whether the target can async
2625 instead of whether it is already async.
2626 (linux_nat_terminal_ours): Don't check whether the target is
2628 (linux_async_pipe): Use linux_is_async_p.
2630 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2632 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
2634 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
2635 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
2636 Sort tp_array using tp_array_compar.
2637 (_initialize_thread): Extend thread_apply_all_command help.
2639 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2641 * corelow.c (core_open): Call also thread_command.
2642 * gdbthread.h (thread_command): New prototype moved from ...
2643 * thread.c (thread_command): ... here.
2644 (thread_command): Make it global.
2646 2015-01-22 Pedro Alves <palves@redhat.com>
2648 * configure.ac [*mingw32*]: Check $curses_found instead of
2650 * configure: Regenerate.
2651 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
2652 HAVE_NCURSES_NCURSES_H checks.
2654 2015-01-22 Eli Zaretskii <eliz@gnu.org>
2656 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
2657 fails with the 1st arg NULL, try again with "unknown". Don't test
2658 the "cup" capability: it isn't supported by the Windows port of
2659 ncurses, but the Windows console driver is still capable of
2662 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2664 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
2666 2015-01-22 Eli Zaretskii <eliz@gnu.org>
2668 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
2669 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
2670 reason that "make TAGS" is broken.
2672 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
2674 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
2675 and check additional store instructions.
2677 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
2679 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
2681 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
2683 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
2684 ppc_canonicalize_syscall, ppc_linux_syscall_record,
2685 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
2686 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
2687 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
2688 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
2689 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
2690 ppc_process_record_op19, ppc_process_record_op31,
2691 ppc_process_record_op59, ppc_process_record_op60,
2692 ppc_process_record_op63): Likewise.
2694 2015-01-20 Joel Brobecker <brobecker@adacore.com>
2696 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
2697 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
2700 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
2702 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
2703 ppc_process_record_op31, ppc_process_record_op59,
2704 ppc_process_record_op60, ppc_process_record_op63,
2705 ppc_process_record): Fix -Wformat warning.
2706 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
2707 Remove unused variables.
2709 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
2711 * MAINTAINERS (Write After Approval): Add "Chen Gang".
2713 2015-01-19 Eli Zaretskii <eliz@gnu.org>
2715 * configure.ac [*mingw32*]: Only add windows-termcap.o to
2716 CONFIG_OBS if not building with a curses library.
2717 * configure: Regenerate.
2719 * windows-termcap.c: Include defs.h. Make the whole body empty if
2720 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
2721 HAVE_NCURSES_NCURSES_H is defined.
2723 2015-01-19 Joel Brobecker <brobecker@adacore.com>
2725 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
2726 from end of line to start of next line.
2728 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
2730 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
2731 Scan PLT stub backward for reverse debugging.
2732 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
2734 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
2735 Ulrich Weigand <uweigand@de.ibm.com>
2737 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
2739 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
2741 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
2742 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
2743 (ppc_linux_init_abi): Set process_record, process_record_signal.
2744 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
2745 ppc_linux_record_tdep to gdbarch_tdep.
2746 (ppc_process_record): New declaration.
2747 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
2748 ppc_process_record_op19, ppc_process_record_op31,
2749 ppc_process_record_op59, ppc_process_record_op60,
2750 ppc_process_record_op63, ppc_process_record): New functions.
2752 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
2754 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
2755 rs6000_in_function_epilogue_frame_p and add an argument
2757 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
2758 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
2760 (rs6000_epilogue_frame_unwind): New.
2761 (rs6000_gdbarch_init): Append epilogue unwinder.
2763 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
2765 * nat/linux-personality.c: Replace "#ifndef
2766 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
2767 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
2770 2015-01-16 Eli Zaretskii <eliz@gnu.org>
2772 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
2774 (_initialize_tui_win) <border-kind, border-mode>:
2775 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
2776 (tui_set_tab_width_command): Fix the commentary.
2778 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
2780 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
2782 (tui_set_tab_width_command): Delete and recreate the source and
2783 the disassembly windows, to show the effect of the changed tab
2786 * tui/tui-data.h (LINE_PREFIX): Make shorter
2787 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
2788 "Thread NNNNN.XXXX" thread ID notation on Windows.
2790 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2792 Fix gcc-5 compilation.
2793 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
2795 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
2797 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
2798 (linux-personality.o): New rule.
2799 * common/common-defs.h: Include <stdint.h>.
2800 * config/aarch64/linux.mh (NATDEPFILES): Include
2801 linux-personality.o.
2802 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
2803 * config/arm/linux.mh (NATDEPFILES): Likewise.
2804 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2805 * config/i386/linux.mh (NATDEPFILES): Likewise.
2806 * config/ia64/linux.mh (NATDEPFILES): Likewise.
2807 * config/m32r/linux.mh (NATDEPFILES): Likewise.
2808 * config/m68k/linux.mh (NATDEPFILES): Likewise.
2809 * config/mips/linux.mh (NATDEPFILES): Likewise.
2810 * config/pa/linux.mh (NATDEPFILES): Likewise.
2811 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
2812 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
2813 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
2814 * config/s390/linux.mh (NATDEPFILES): Likewise.
2815 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
2816 * config/sparc/linux.mh (NATDEPFILES): Likewise.
2817 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
2818 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
2819 * defs.h: Remove #include <stdint.h> (moved to
2820 common/common-defs.h).
2821 * linux-nat.c: Include nat/linux-personality.h. Remove #include
2822 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
2823 nat/linux-personality.c).
2824 (linux_nat_create_inferior): Remove code to disable address space
2825 randomization (moved to nat/linux-personality.c). Create cleanup
2826 to disable address space randomization.
2827 * nat/linux-personality.c: New file.
2828 * nat/linux-personality.h: Likewise.
2830 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
2832 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
2833 common/posix-strerror.c.
2834 (posix-strerror.o): New rule.
2835 (mingw-strerror.o): Likewise.
2836 * common/common-utils.h (safe_strerror): Move prototype to here,
2838 * common/common.host: New file.
2839 * common/mingw-strerror.c: Likewise.
2840 * common/posix-strerror.c: Likewise.
2841 * configure: Regenerated.
2842 * configure.ac: Source common/common.host. Add variable
2843 common_host_obs to gdb_host_obs.
2844 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
2845 gdb/common/posix-strerror.c when warning about the use of
2847 * mingw-hdep.c (safe_strerror): Remove definition; move it to
2848 common/mingw-strerror.c.
2849 * posix-hdep.c (safe_strerror): Remove definition; move it to
2850 common/posix-hdep.c.
2851 * utils.h (safe_strerror): Remove prototype; move to
2852 common/common-utils.h.
2854 2015-01-15 Joel Brobecker <brobecker@adacore.com>
2858 2015-01-15 Joel Brobecker <brobecker@adacore.com>
2860 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
2861 ___XA type if the array has already been fixed.
2863 2015-01-14 Yao Qi <yao@codesourcery.com>
2865 * Makefile.in (ppc-linux.o): New rule.
2866 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
2867 * configure.ac: AC_CHECK_FUNCS(getauxval).
2868 * config.in: Re-generated.
2869 * configure: Re-generated.
2870 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
2872 * nat/ppc-linux.c: New file.
2873 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
2874 Call ppc64_64bit_inferior_p.
2876 2015-01-14 Yao Qi <yao@codesourcery.com>
2878 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
2880 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
2881 (PPC_FEATURE_HAS_DFP): Likewise.
2882 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
2883 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
2884 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
2885 Include "nat/ppc-linux.h".
2886 * nat/ppc-linux.h: New file.
2887 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
2889 2015-01-14 Pedro Alves <palves@redhat.com>
2892 * breakpoint.c: Include "interps.h".
2893 (bpstat_do_actions_1): Also check whether the interpreter is
2896 2015-01-14 Pedro Alves <palves@redhat.com>
2899 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
2900 reinstall if the interpreter is sync.
2902 2015-01-13 Doug Evans <dje@google.com>
2904 * objfiles.c (objfile_filename): New function.
2905 * objfiles.h (objfile_filename): Declare it.
2906 (objfile_name): Add function comment.
2907 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
2908 bfd file name (which may be realpath'd), and the original name.
2910 2015-01-13 Joel Brobecker <brobecker@adacore.com>
2912 * NEWS: Create a new section for the next release branch.
2913 Rename the section of the current branch, now that it has
2916 2015-01-13 Joel Brobecker <brobecker@adacore.com>
2918 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
2919 * version.in: Bump version to 7.9.50.DATE-cvs.
2921 2015-01-13 Joel Brobecker <brobecker@adacore.com>
2923 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
2924 Remove trailing new-line in argument of call to warning.
2926 2015-01-13 Joel Brobecker <brobecker@adacore.com>
2928 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
2929 new-line in argument of call to "warning".
2931 2015-01-13 Joel Brobecker <brobecker@adacore.com>
2933 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
2934 in static block, then try searching for primitive types.
2936 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
2938 * top.h (gdb_add_history): Declare.
2939 * top.c (command_count): New variable.
2940 (gdb_add_history): New function.
2941 (gdb_safe_append_history): New static function.
2942 (quit_force): Call it.
2943 (command_line_input): Use gdb_add_history instead of
2945 * event-top.c (command_line_handler): Likewise.
2947 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
2950 * darwin-nat.c: Replace <machine/setjmp.h> #include by
2951 <setjmp.h> #include.
2953 2015-01-11 Doug Evans <xdje42@gmail.com>
2955 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
2957 2015-01-11 Doug Evans <xdje42@gmail.com>
2960 * NEWS: The "maint demangle" command is renamed as "demangle".
2961 * demangle.c: #include cli/cli-utils.h, language.h.
2962 (demangle_command): New function.
2963 (_initialize_demangle): Add new command "demangle".
2964 * maint.c (maintenance_demangle): Stub out.
2965 (_initialize_maint_cmds): Update help text for "maint demangle",
2966 and mark as deprecated.
2968 2015-01-11 Mark Kettenis <kettenis@gnu.org>
2970 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
2971 inferior_thread is a function.
2973 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
2975 * Makefile.in (.y.c): Don't munge yacc's #line
2978 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
2980 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
2981 to prompt for input.
2982 * tui/tui-hooks.c (tui_query_hook): Remove.
2983 (tui_install_hooks): Don't set deprecated_query_hook.
2984 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
2985 height calculation. Always update the command window's cur_line.
2987 2015-01-09 Pedro Alves <palves@redhat.com>
2989 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
2991 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
2993 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
2994 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
2996 (check_stopped_by_watchpoint): New function.
2997 (save_sigtrap): Reimplement.
2998 (linux_nat_stopped_by_watchpoint): Adjust.
2999 (linux_nat_lp_status_is_event): Delete.
3000 (stop_wait_callback): Only call save_sigtrap after storing the
3002 (status_callback): If the thread had been stopped for a breakpoint
3003 that has since been removed, discard the event and resume the LWP.
3004 (count_events_callback, select_event_lwp_callback): Use
3005 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
3006 (cancel_breakpoint): Rename to ...
3007 (check_stopped_by_breakpoint): ... this. Record whether the LWP
3008 stopped for a software breakpoint or hardware breakpoint.
3009 (select_event_lwp): Only give preference to the stepping LWP in
3010 all-stop mode. Adjust comments.
3011 (stop_and_resume_callback): Remove references to new_pending_p.
3012 (linux_nat_filter_event): Likewise. Leave exit events of the
3013 leader thread pending here. Handle signal short circuiting here.
3014 Only call save_sigtrap after storing the pending waitstatus.
3015 (linux_nat_wait_1): Remove 'retry' label. Remove references to
3016 new_pending. Don't handle leaving events the caller is not
3017 interested in pending here, nor handle signal short-circuiting
3018 here. Also give equal priority to all LWPs that have had events
3019 in non-stop mode. If reporting a software breakpoint event,
3020 unadjust the LWP's PC.
3021 * linux-nat.h (enum lwp_stop_reason): New.
3022 (struct lwp_info) <stop_pc>: New field.
3023 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
3024 (struct lwp_info) <stop_reason>: New field.
3025 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
3027 2015-01-09 Pedro Alves <palves@redhat.com>
3029 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
3030 Set the LWP's 'resumed' flag.
3032 2015-01-09 Pedro Alves <palves@redhat.com>
3034 * linux-nat.c (linux_resume_one_lwp): New function.
3035 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
3036 (linux_nat_resume): Use lwp_status_pending_p and
3037 linux_resume_one_lwp.
3038 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
3039 (linux_handle_extended_wait): Use linux_resume_one_lwp.
3040 (status_callback, running_callback): Use lwp_status_pending_p.
3041 (lwp_status_pending_p): New function.
3042 (stop_and_resume_callback): Use lwp_status_pending_p.
3043 (linux_nat_filter_event): Use linux_resume_one_lwp.
3044 (linux_nat_wait_1): Always use status_callback to look for an LWP
3045 with a pending status. Use linux_resume_one_lwp.
3046 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
3047 linux_resume_one_lwp.
3049 2015-01-09 Pedro Alves <palves@redhat.com>
3051 * breakpoint.c (bp_location_inserted_here_p): New function,
3052 factored out from ...
3053 (breakpoint_inserted_here_p): ... here. Use
3054 ALL_BP_LOCATIONS_AT_ADDR.
3055 (software_breakpoint_inserted_here_p): Use
3056 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
3058 2014-01-09 Pedro Alves <palves@redhat.com>
3060 Skip enabling event reporting if the kernel supports
3062 * linux-thread-db.c: Include "nat/linux-ptrace.h".
3063 (thread_db_use_events): New function.
3064 (try_thread_db_load_1): Check thread_db_use_events before enabling
3066 (update_thread_state): New function.
3067 (attach_thread): Use it. Check thread_db_use_events before
3068 enabling event reporting.
3069 (thread_db_detach): Check thread_db_use_events before disabling
3071 (find_new_threads_callback): Check thread_db_use_events before
3072 enabling event reporting. Update the thread's state if not using
3073 libthread_db events.
3075 2015-01-09 Pedro Alves <palves@redhat.com>
3077 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
3078 about to wait for is > 0.
3079 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
3080 the kernel thread ID is -1.
3082 2015-01-09 Pedro Alves <palves@redhat.com>
3084 * linux-nat.c (attach_proc_task_lwp_callback): New function.
3085 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
3086 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
3087 ptrace option flags.
3088 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
3090 * nat/linux-procfs.c: Include <dirent.h>.
3091 (linux_proc_get_int): New parameter "warn". Handle it.
3092 (linux_proc_get_tgid): Adjust.
3093 (linux_proc_get_tracerpid): Rename to ...
3094 (linux_proc_get_tracerpid_nowarn): ... this.
3095 (linux_proc_pid_get_state): New function, factored out from
3096 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
3098 (linux_proc_pid_is_gone): New function.
3099 (linux_proc_pid_is_stopped): Adjust.
3100 (linux_proc_pid_is_zombie_maybe_warn)
3101 (linux_proc_pid_is_zombie_nowarn): New functions.
3102 (linux_proc_pid_is_zombie): Use
3103 linux_proc_pid_is_zombie_maybe_warn.
3104 (linux_proc_attach_tgid_threads): New function.
3105 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
3106 (linux_proc_get_tracerpid): Rename to ...
3107 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
3108 (linux_proc_pid_is_gone): New declaration.
3109 (linux_proc_pid_is_zombie): Update comment.
3110 (linux_proc_pid_is_zombie_nowarn): New declaration.
3111 (linux_proc_attach_lwp_func): New typedef.
3112 (linux_proc_attach_tgid_threads): New declaration.
3113 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
3114 use nowarn functions.
3115 (linux_ptrace_attach_fail_reason_string): Move here from
3116 gdbserver/linux-low.c and rename.
3117 (ptrace_supports_feature): If the current ptrace options are not
3118 known yet, check them now, instead of asserting.
3119 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
3122 2015-01-09 Pedro Alves <palves@redhat.com>
3124 * linux-thread-db.c (thread_db_find_new_threads_silently)
3125 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
3126 (find_new_threads_once): Print debug output on gdb_stdlog.
3128 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
3129 Pedro Alves <palves@redhat.com>
3131 * compile/compile.c: Include "gdb_wait.h".
3132 (do_rmdir): Check return value, and free 'zap'.
3134 2015-01-08 Pedro Alves <palves@redhat.com>
3135 Yao Qi <yao@codesourcery.com>
3137 * dwarf2loc.c (indirect_pieced_value): Don't call
3138 gdb_sign_extend. Call extract_signed_integer instead.
3139 * utils.c (gdb_sign_extend): Remove.
3140 * utils.h (gdb_sign_extend): Remove declaration.
3142 2015-01-07 Pierre Muller <muller@sourceware.org>
3145 * stabsread.c (define_symbol): Set language for C++ special symbols.
3147 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
3149 * inflow.c (initial_gdb_ttystate): Tweak comment.
3151 2015-01-07 Joel Brobecker <brobecker@adacore.com>
3153 * inflow.c (set_initial_gdb_ttystate): Add empty line after
3154 comment documenting function.
3156 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
3158 * terminal.h (set_initial_gdb_ttystate): Declare.
3159 * inflow.c (initial_gdb_ttystate): New static variable.
3160 (set_initial_gdb_ttystate): New setter.
3161 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
3162 instead of our current terminal state.
3163 * top.c (gdb_init): Call set_initial_gdb_ttystate.
3165 2015-01-07 Joel Brobecker <brobecker@adacore.com>
3167 * guile/scm-type.c (tyscm_array_1): Add comment.
3168 * python/py-type.c (typy_array_1): Add comment.
3170 2015-01-06 Joel Brobecker <brobecker@adacore.com>
3172 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
3173 error if N2 is equal to N1 - 1.
3175 2015-01-06 Joel Brobecker <brobecker@adacore.com>
3177 * python/py-type.c (typy_array_1): Do not raise negative-length
3178 exception if N2 is equal to N1 - 1.
3180 2015-01-03 Doug Evans <xdje42@gmail.com>
3182 * c-exp.y: Whitespace cleanup.
3183 (classify_inner_name): Remove extra ;.
3185 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
3187 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
3190 2015-01-02 Doug Evans <dje@google.com>
3192 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
3194 2015-01-02 Doug Evans <dje@google.com>
3196 * symtab.h (struct symbol): Fix typo in comment.
3198 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3200 Update year range in copyright notice of all files.
3202 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3204 * top.c (print_gdb_version): Update copyright year to 2015.
3206 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3208 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
3210 For older changes see ChangeLog-2014.
3216 version-control: never
projects / deliverable / binutils-gdb.git / blob