[deliverable/binutils-gdb.git] / gdb / ChangeLog

2000-09-15  Kevin Buettner  <kevinb@redhat.com>

        * language.c (show_case_command, set_case_command): Protoize.
        * m3-nat.c (m3_xfer_memory, fetch_thread_info): Protoize.

2000-09-12  Kevin Buettner  <kevinb@redhat.com>

        * lin-thread.c (threadlist_iter, get_lwp_from_thread_id,
        thread_db_xfer_memory): Protoize.
        * linux-thread.c (iterate_active_threads): Protoize.

2000-09-12  Kevin Buettner  <kevinb@redhat.com>

        * objfiles.c (objfile_relocate): Don't assume that offsets
        associated with one of SECT_OFF_TEXT, SECT_OFF_DATA, or
        SECT_OFF_BSS will be adequate for relocating all of the
        sections in an objfile.

2000-09-12  Fernando Nasser  <fnasser@cygnus.com>

        * remote-rdi.c (arm_rdi_open): Fix typo in error message.

Wed Sep 13 03:08:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote-mips.c (mips_expect, mips_getstring, mips_send_packet,
        mips_send_packet, pmon_insert_breakpoint, send_srec,
        pmon_check_ack, pmon_check_entry_address,
        _initialize_remote_mips): Replace the magic two seconds with
        ``remote_timeout''.
        (pmon_check_entry_address, pmon_check_total): New functions.  Use
        ``remote_timeout'' instead of magic two seconds.
        (pmon_end_download): Rewrite.  Use pmon_check_entry_address and
        pmon_check_total.

2000-09-12  Alexandre Oliva  <aoliva@redhat.com>

        * MAINTAINERS: Added myself.

2000-09-11  Alexandre Oliva  <aoliva@redhat.com>

        * acinclude.m4 (CY_GNU_GETTEXT): Add dummy definition, so that the
        one brought in by ../bfd/acinclude.m4 prevails.
        * aclocal.m4, configure: Rebuilt.

2000-09-11  Kevin Buettner  <kevinb@redhat.com>

        * configure.in (HAVE_STRUCT_LINK_MAP32): Change test to use
        AC_TRY_COMPILE instead of AC_TRY_RUN.
        * configure: Regenerate.

2000-09-11  Kevin Buettner  <kevinb@redhat.com>

        * irix4-nat.c (fetch_core_registers): Protoize.
        * irix5-nat.c (fetch_core_registers, find_solib): Protoize.

2000-09-06  Mark Kettenis  <kettenis@gnu.org>

        * lin-lwp.c (normal_mask, blocked_mask): New variables.
        (lin_lwp_wait): Block SIGCHLD here if it isn't already blocked.
        (lin_lwp_mourn_inferior): Restore the origional signal mask, and
        reset the mask of blocked signals.
        (_initialize_lin_lwp): Don't block SIGCHLD here, but do initialize
        suspend_mask and blocked_mask.  This makes us pass
        gdb.base/sigall.exp for Linux/x86 now.
        (lin_thread_get_thread_signals): Treat the LinuxThreads "cancel"
        signal similarly to SIGCHLD in the generic code.  Avoids GDB being
        terminated by a Real-time signal.

2000-09-08  Kevin Buettner  <kevinb@redhat.com>

        * infptrace.c, infttrace.c (child_xfer_memory): Protoize.

2000-09-07  J.T. Conklin  <jtc@redback.com>

        * config/i386/nbsd.mt (TDEPFILES): Add i386nbsd-tdep.o.
        * i386nbsd-nat.c (i386nbsd_use_struct_convention): Moved from here.
        * i386nbsd-tdep.c (i386nbsd_use_struct_convention): To here.
        * i386nbsd-tdep.c: New file.

2000-09-07  Kevin Buettner  <kevinb@redhat.com>

        * i386mach-nat.c (fetch_inferior_registers, fetch_core_registers):
        Protoize.
        * i960-tdep.c (i960_skip_prologue, leafproc_return, mem): Protoize.

Thu Sep  7 21:59:23 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * aclocal.m4: Regenerate.
        * config.in, configure: Regenerate.

Wed Sep  6 23:15:43 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote-rdi.c (voiddummy): Update function signature to match
        struct Dbg_HostosInterface's reset method.
        * remote-rdp.c (rdp_step): Fix handle parameter to
        remote_rdp_insert_breakpoint and remote_rdp_remove_breakpoint.

        * arm-tdep.c (SIGCONTEXT_REGISTER_ADDRESS_P): Provide default
        definition.
        (arm_init_extra_frame_info): Use.

2000-09-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * m68hc11-tdep.c (m68hc11_store_return_value): Store the value
        in D and X if it's larger than 16-bits.
        (m68hc11_extract_return_value): Fix extractions for 1 and 3 bytes
        return.
        (m68hc11_push_return_address): Use CALL_DUMMY_ADDRESS for the
        return address.
        (m68hc11_use_struct_convention): Check for struct and union.
        (m68hc11_return_value_on_stack): Use the struct convention.
        (m68hc11_call_dummy_address): Use the entry point address.
        (m68hc11_push_arguments): Fix alignment and padding.
        (m68hc11_stack_align): New function.
        (m68hc11_gdbarch_init): Register it.

2000-09-06  Scott Bambrough <scottb@netwinder.org>

        * arm-linux-tdep.c (arm_linux_skip_solib_resolver):
        Removed debug print statement.  Removed arm_pc_is_thumb prototype.
        * config/arm/tm-arm.h (arm_pc_is_thumb, arm_pc_is_thumb_dummy):
        Move prototypes here from tm-embed.h.
        * config/arm/tm-embed.h (arm_pc_is_thumb, arm_pc_is_thumb_dummy):
        Remove prototypes.  Moved to tm-arm.h.

2000-09-06  H.J. Lu  <hjl@gnu.org>

        * TODO: Add hardware watchpoint problems on x86 OSes for 5.1.

2000-09-06  Kevin Buettner  <kevinb@redhat.com>

        * ia64-tdep.c (examine_prologue): Add rotating register rename
        support for the general registers.
        (ia64_get_saved_register): Add rotating register rename support
        for the predicate registers and the floating-point registers.

2000-09-05  Kevin Buettner  <kevinb@redhat.com>

        * config/arm/tm-linux.h (arm_linux_sigcontext_register_address,
        arm_linux_in_sigtramp): Declare.
        (IN_SIGTRAMP, SIGCONTEXT_REGISTER_ADDRESS): Define.
        * arm-tdep.c (SIGCONTEXT_REGISTER_ADDRESS): Define to be 0
        if not already defined by tm.h.
        (arm_scan_prologue): Don't assume that the prologue instructions
        will be in a contiguous clump.
        (arm_init_extra_frame_info): Add support for sigtramp frames.
        (arm_pc_is_thumb, arm_pc_is_thumb_dummy): Change type of
        `memaddr' from bfd_vma to CORE_ADDR.
        * arm-linux-tdep.c (gdbcore.h, frame.h): Include.
        (arm_pc_is_thumb): Declare.
        (arm_linux_skip_solib_resolver): Fix printf() statement.  [Which
        shouldn't be there anyway.]
        (ARM_LINUX_SIGRETURN_INSTR, ARM_LINUX_RT_SIGRETURN_INSTR): New
        defines.
        (arm_linux_in_sigtramp, arm_linux_sigcontext_register_address):
        New functions.

2000-09-05  Kevin Buettner  <kevinb@redhat.com>

        * i386aix-nat.c (fetch_core_registers): Protoize.
        * hpux-thread.c (hpux_thread_xfer_memory): Protoize.

2000-09-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * m68hc11-tdep.c (m68hc11_frame_chain): Check for pc in call dummy.
        (m68hc11_guess_from_prologue): 'des' instruction to allocate 1 byte
        on the stack can appear in the prologue.
        
2000-09-05  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * sol-thread.c (ps_pdmodel): Protect with an ifdef.

Mon Sep  4 16:21:31 2000  Andrew Cagney  <cagney@amy.cygnus.com>

        * gdbarch.sh: Use printf instead of echo.
        (do_read): During read, pad ``::'' with spaces and then strip out
        those spaces.  Avoid problems with IFS=:.

2000-09-04  Mark Kettenis  <kettenis@gnu.org>

        * config/i386/nm-linux.h: Include <signal.h>.

2000-09-04 Pierre Muller <muller@ics.u-strasbg.fr>

        * c-typeprint.c (c_typedef_print): remove (replaced by 
        typedef_print in typeprint.c).
        * typeprint.c (typedef_print): new function. (old c_typedef_print
        function with pascal language support added).
        * value.h (c_printdef_print): removed.
        (typedef_print): declare.
        * symtab.c (print_symbol_info): call to c_typedef_print replaced
        by call to typedef_print.

2000-09-03  Mark Kettenis  <kettenis@gnu.org>

        * config/i386/nm-linux.h (PREPARE_TO_PROCEED, ATTCH_LWP,
        GET_THREAD_SIGNALS): New defines.
        * config/i386/linux.mh (NATDEPFILES): Remove lin-thread.o and
        linux-threads.o.  Add proc-service.o, thread-db.o and lin-lwp.o.
        * proc-service.c: New file.
        * thread-db.c: New file.
        * lin-lwp.c: New file.

        * gdb_assert.h: New file.

        * gdb_thread_db.h [HAVE_THREAD_DB_H]: Include <thread_db.h>.
        [!HAVE_THREAD_DB_H]: Update from current glibc thread_db.h.  Deal
        with absence of <stdint.h> here.

        * gdb_proc_service.h: Add copyright notice.
        Protect against multiple inclusion.
        Add fix for broken prfpregset_t here.
        (struct ps_prochandle): Declare here.
        [HAVE_PROC_SERVICE_H]: Include <proc_service.h>.
        [!HAVE_PROC_SERVICE_H]: Include "gregset.h", define prgregset_t
        and prfpregset_t in terms of gdb_gregset_t and gdb_fpregset_t if
        necessary.
        * lin-thread.c: Unconditionally include "gdb_proc_service.h".
        Remove fix for broken prfpregset_t here.
        (struct ps_prochandle): Don't declare here.

        * MAINTAINERS: Add myself as threads co-maintainer.

2000-09-01  David Anderson  <davea@sgi.com>

        * arch-utils.c arch-utils.h blockframe.c fork-child.c:
        Corrected comment spelling dependant->dependent.
        * corelow.c (default_core_sniffer): Corrected comment 
        spelling.
        * cp-valprint.c (cp_print_value_fields): Corrected 
        comment spelling.
        * d10v-tdep.c dbxread.c: Corrected comment spelling 
        dependan->dependen.
        * defs.h: Corrected spelling, meant 64, not 32, in comment.
        * dst.h eval.c event-loop.c: Corrected comment spelling.
        * event-top.c gdb-events.sh: Corrected comment spelling.
        * gdbarch.c: Corrected comment spelling.
        * gdbarch.h gdbarch.sh: Corrected comment spelling,
        dependant->dependent.
        * gdbtypes.c gdbtypes.h: Corrected comment spelling.
        * infcmd.c infrun.c: Corrected comment spelling.
        * symfile.c symfile.h target.h: Corrected comment spelling,
        dependant->dependent.
        * tracepoint.h: Corrected comment spelling.

2000-09-01  Kevin Buettner  <kevinb@redhat.com>

        * hppa-tdep.c (record_text_segment_lowaddr): Protoize.
        * hppah-nat.c (child_xfer_memory): Protoize.

2000-09-01  Kevin Buettner  <kevinb@redhat.com>

        * symtab.c (decode_line_1):  Make sure leading character is
        actually a colon before skipping over leading colons in global
        namespace specification.

2000-09-01  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * regcache.c (reg_flush_command): New function.  Maintainer-mode
        command, flushes GDB's register cache, for testing purposes.

2000-08-31  J.T. Conklin  <jtc@redback.com>

        * dcache.c (dcache_info): Output a cache line's state vector so it
        lines up under the data vector.

        * dcache.c (dcache_read_line): New function.
        (dcache_peek_byte): Use it.
        (dcache_alloc): Return NULL if write of reclaimed cache line fails.
        (dcache_peek_byte, dcache_poke_byte): Return failure if
        dcache_alloc() returns a NULL data block pointer.  
        (dcache_xfer_memory): Don't force writeback unless we were writing.

        * monitor.c (monitor_expect): Change places where immediate_quit
        is set to 1 or 0 to increments and decrements respectively.  This
        allows such changes to nest properly.
        * ocd.c (ocd_start_remote): Likewise.
        * remote-adapt.c (expect): Likewise.
        * remote-array.c (expect): Likewise.
        * remote-eb.c (expect): Likewise.
        * remote-e7000.c (e7000_start_remote): Likewise.
        * remote-mips.c (mips_expect_timeout, mips_getstring): Likewise.
        * remote-nrom.c (expect): Likewise.
        * remote-os9k.c (expect): Likewise.
        * remote-sds.c (sds_start_remote): Likewise.
        * remote-st.c (expect): Likewise.
        * remote-utils.c (sr_expect): Likewise.
        * remote.c (remote_start_remote): Likewise.
        * tracepoint.c (read_actions): Likewise.

        * remote-mips.c (mips_getstring): Balance changes to immediate_quit.

2000-08-31  David Anderson  <davea@sgi.com>

        * MAINTAINERS: Add myself to write-after-approval list.

2000-08-30  Kevin Buettner  <kevinb@redhat.com>

        * gnu-nat.c (gnu_xfer_memory): Protoize.
        * hp-psymtab-read.c (scan_procs, hp_quick_traverse): Protoize.

2000-08-30  Kevin Buettner  <kevinb@redhat.com>

        * solib.c (solib_extract_address, LM_ADDR, LM_NEXT, LM_NAME,
        LM_ADDR, IGNORE_FIRST_LINK_MAP_ENTRY, first_link_map_member,
        open_symbol_file_object, current_sos): Rename
        bfd_elf_get_arch_size to bfd_get_arch_size().
        * sol-thread.c (rw_common, ps_pdmodel): Likewise.

2000-08-30  David Edelsohn  <dje@watson.ibm.com>

        Patch applied by Kevin Buettner <kevinb@redhat.com>:

        * rs6000-nat.c (xcoff_relocate_symtab): Pass correct size
        to xrealloc().

2000-08-29  Michael Snyder  <msnyder@seadog.cygnus.com>

        * valops.c (value_cast): Indentation fix-up.
        * acconfig.h (HAVE_PRGREGSET32_T, HAVE_PRFPREGSET32_T, 
        HAVE_STRUCT_LINK_MAP32): New configure macros.
        * config.in: Ditto.
        * configure.in: Test for the above new macros.
        * breakpoint.c: Update copyright date.
        * core-sol2.c: Include v9/sys/privregs.h directly to 
        work around a bug in Sun's Solaris 8 header files.
        (fetch_core_registers): Use the above new configure macros to
        handle cross-debugging of 32-bit core files on a 64-bit host.
        * sol-thread.c (ps_pdmodel) New function.
        (rw_common): For debugging of 32-bit apps on a 64-bit host, 
        truncate addresses to 32 bits.
        * solib.c (solib_extract_address): Functionize.  Make 32/64 aware.
        (LM_ADDR, LM_NEXT, LM_NAME): Ditto.
        (IGNORE_FIRST_LINK_MAP): Ditto.
        (first_link_map_member): Make 32/64 aware.
        (open_symbol_file_object): Ditto.
        (current_sos): Ditto.

2000-08-29  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * i386-linux-nat.c (i386_linux_skip_solib_resolver, 
        skip_hurd_resolver, find_minsym_and_objfile): Move these
        solib functions into i386-linux-tdep.c for cross debugging.
        * i386-linux-tdep.c: Receive the above functions.

2000-08-29  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * m68hc11-tdep.c (stack_correction): New variable for stack offset
        correction (1 for 68hc11, 0 for 68hc12).
        (m68hc11_saved_pc_after_call): Use it.
        (m68hc11_frame_chain): Likewise.
        (m68hc11_frame_init_saved_regs): Likewise.
        (m68hc11_init_extra_frame_info): Likewise.
        (m68hc11_push_return_address): Likewise.
        (m68hc11_push_arguments): Struct address must be corrected by
        applying the stack_correction offset.
        (m68hc11_store_struct_return): Likewise.

2000-08-28  Kevin Buettner  <kevinb@redhat.com>

        * gdbserver/utils.c (error, fatal): Protoize.

2000-08-27  Mark Kettenis  <kettenis@gnu.org>

        * i386-linux-nat.c (fetch_inferior_registers): Move call to
        dummy_sse_values ...
        (supply_fpregset): ... here.

2000-08-27  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * pa64solib.c (pa64_solib_load_symbols): Don't use ANOFFSET as an
        lvalue.
        * xcoffread.c (xcoff_symfile_offsets): Ditto
        * somsolib.c (som_solib_section_offsets): Ditto.
        * somread.c (som_symfile_offsets): Ditto.
        * rs6000-nat.c (vmap_symtab): Ditto.
        * remote-vx.c (vx_add_symbols): Ditto.
        * remote-os9k.c (rombug_wait): Ditto.

2000-08-27  Mark Kettenis  <kettenis@gnu.org>

        * gregset.h: Protect against multiple inclusion.  Remove some
        redundant spaces.

Sun Aug 27 00:00:04 2000  Christopher Faylor <cgf@cygnus.com>

        * win32-nat.c (dll_symbol_command): Tack a .dll on the end of a
        supplied argument if it is missing an extension.

2000-08-24  Egor Duda <deo@logos-m.ru>

        * corelow.c: Define O_BINARY if it isn't defined.
        (core_open): Open core file in binary mode.
        * config/i386/tm-cygwin.h (child_clear_solibs): Rename from
        child_clear_solib.
        * config/i386/cygwin.mh: Add dependency from corelow.o.
        * win32-nat.c (register_loaded_dll): New function.  Add dll to the list
        of currently loaded dlls.
        (handle_load_dll): Use register_loaded_dll.
        (child_solib_add): Distinguish between active process and core targets.
        (solib_symbols_add): Load symbols from loaded dll.
        (core_dll_symbols_add): New function.  Load symbols from dll referenced
        in core.
        (core_section_load_dll_symbols): New function.
        (dll_code_sections_add): New function.
        (map_single_dll_code_section): New function.
        (fetch_elf_core_registers): New function.
        (_initialize_core_win32): New function.

2000-08-26  Kevin Buettner  <kevinb@redhat.com>

        * gdbserver/gdbreplay.c (main): Protoize.
        * gdbserver/server.c (start_inferior, main): Protoize.

2000-08-26  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * m68hc11-tdep.c (m68hc11_register_names): Update name of registers.
        (m68hc11_get_register_info): New function.
        (m68hc11_initialize_register_info): New function to get addresses
        of soft registers.
        (m68hc11_which_soft_register): New function.
        (m68hc11_fetch_pseudo_register, m68hc11_store_pseudo_register):
        New functions to translate read/write of soft registers into a
        memory read/write.
        (m68hc11_guess_from_prologue): Initialize soft register addresses.
        Use the soft register addresses to guess the prologue.
        (m68hc11_gdbarch_init): Install the pseudo registers.

        * m68hc11-tdep.c (m68hc11_register_name, m68hc11_breakpoint_from_pc,
        m68hc11_saved_pc_after_call, m68hc11_frame_saved_pc,
        m68hc11_frame_args_address, m68hc11_frame_locals_address,
        m68hc11_guess_from_prologue, m68hc11_push_arguments,
        m68hc11_call_dummy_address, m68hc11_call_dymmy_address,
        m68hc11_register_virtual_type, m68hc11_store_struct_return,
        m68hc11_store_return_value, m68hc11_extract_return_value,
        m68hc11_use_struct_convention, m68hc11_return_value_on_stack,
        m68hc11_extract_struct_value_address, m68hc11_push_return_address,
        m68hc11_register_byte, m68hc11_register_raw_size,
        m68hc11_gdbarch_init): New functions for multi-arch support.
        (m68hc11_not_yet): Remove.

Fri Aug 25 16:57:05 2000  David Taylor  <taylor@texas.cygnus.com>

        * regcache.c (register_changed): New function.
        * value.h: Declare it.
        
Fri Aug 25 12:11:21 2000  David Taylor  <taylor@texas.cygnus.com>

        * symtab.c (search_symbols): Fix off by one error in index for
        initializing variables ourtype, ourtype2, ourtype3, and ourtype4.
        (symtab_symbol_info): fix similar off by one error.
        
Fri Aug 25 12:03:15 2000  David Taylor  <taylor@texas.cygnus.com>

        * gdbarch.sh (TARGET_ADDR_BIT): New macro for the number
        of bits in gdb's representation of a target address.
        * gdbarch.c, gdbarch.h: Regenerated.
        * gdbtypes.c (build_gdbtypes): Use TARGET_ADDR_BIT instead of
        TARGET_PTR_BIT when initializing builtin_type_CORE_ADDR.
        * printcmd.c (print_address_numeric): Use TARGET_ADDR_BIT instead
        of TARGET_PTR_BIT, because we're printing an address, not a pointer.

2000-08-25  Pierre Muller  <muller@ics.u-strasbg.fr>

       * Makefile.in: add rules to compile and link pascal specific files.
       * config/djgpp/fnchange.lst: add substitution for p-exp.tab.c.

2000-08-20  Michael Chastain  <chastain@redhat.com>

        * remote.c (read_frame): Handle SERIAL_TIMEOUT while reading
        checksum.

2000-08-23  Kevin Buettner  <kevinb@redhat.com>

        * dstread.c (dst_symfile_offsets): Protoize.
        * fork-child.c (fork_inferior): Protoize.

2000-08-21  Kevin Buettner  <kevinb@redhat.com>

        * dbxread (dbx_symfile_read, process_later): Protoize.
        * dsrec.c (load_srec): Protoize.

2000-08-18  Andrew Cagney  <cagney@ops1.cygnus.com>

        * mips-tdep.c (mips_gdbarch_init): Check arches->gdbarch and not
        current_gdbarch for a match.

2000-08-18  J.T. Conklin  <jtc@redback.com>

        * MAINTAINERS: Add myself as dcache.c maintainer.

        * remote-nindy.c (nindy_load): Invalidate dcache.

        * dcache.c (dcache_invd): Renamed from dcache_flush.  The term
        flush with respect to caches usually implies that data will be 
        written to memory.
        (dcache_init, dcache_xfer_memory): Updated.
        * monitor.c (flush_monitor_dcache, monitor_resume, monitor_load): 
        Updated.
        * ocd.c (ocd_open, ocd_resume, bdm_reset_command): Updated.
        * remote-bug.c (bug_load, bug_resume): Updated.
        * remote-nindy.c (nindy_open, nindy_resume): Updated.
        * remote-sds.c (sds_open, sds_resume): Updated.
        * remote-utils.c (gr_open): Updated.
        * remote.c (remote_open_1, remote_resume, remote_async_resume,
        remote_cisco_open): Updated.
        * wince.c (child_create_inferior, child_resume): Updated.

        * monitor.c (monitor_open): Free dcache before creating a new one.
        * dcache.c (dcache_free): New function.
        * dcache.h (dcache_free): New prototype.

2000-08-18  Andrew Cagney  <cagney@ops1.cygnus.com>

        * remote-array.c (array_fetch_register): Pass dummy parameter to
        array_fetch_registers.
        (array_store_register): Ditto.

2000-08-16  Eli Zaretskii <eliz@is.elta.co.il>

        * value.h (struct value) <lazy>: Add a comment about its use for
        watchpoints.

2000-08-12  Kevin Buettner  <kevinb@redhat.com>

        * cxux-nat.c (fetch_inferior_registers): Protoize.
        * d10v-tdep.c (d10v_frame_chain_valid, d10v_extract_return_value):
        Protoize.
        * d30v-tdep.c (d30v_frame_chain_valid, d30v_extract_return_value):
        Protoize.

Fri Aug 11 19:00:51 2000  Andrew Cagney  <cagney@makita.cygnus.com>

        * config/mn10300/tm-mn10300.h (REGISTER_SIZE,
        MAX_REGISTER_RAW_SIZE, REGISTER_VIRTUAL_TYPE, REGISTER_BYTE,
        REGISTER_VIRTUAL_SIZE, REGISTER_RAW_SIZE): Disable.
        * mn10300-tdep.c (mn10300_do_registers_info,
        mn10300_print_register): New functions.  Pretty print registers.
        (mn10300_register_virtual_type, mn10300_register_byte,
        mn10300_register_virtual_size, mn10300_register_raw_size): New
        functions.
        (mn10300_gdbarch_init): Update.

        * mn10300-tdep.c (mn10300_gdbarch_init): Check for mn10300 variant
        and not mips variant in the info struct.

2000-08-11  Mark Kettenis  <kettenis@gnu.org>

        * i386-linux-nat.c [! HAVE_PTRACE_GETFPXREGS] (fetch_fpxregs,
        store_fpxregs): Return 0.

2000-08-11  Andrew Cagney  <cagney@lulu.cygnus.com>

        * regcache.c (GET_SAVED_REGISTER): Restore definition.  Was lost
        as part of 2000-08-10 Andrew Cagney <cagney@ops1.cygnus.com>.

2000-08-11  J.T. Conklin  <jtc@redback.com>

        * dcache.c (dcache_info): Don't print cache state if last_cache 
        is NULL.

2000-08-10  Andrew Cagney  <cagney@ops1.cygnus.com>

        * config/mn10300/tm-mn10300.h, mn10300-tdep.c
        (mn10300_push_arguments): Fix function signature to match gdbarch
        vector.
        * config/mn10300/tm-mn10300.h (REGISTER_NAME): Delete.
        * mn10300-tdep.c (struct gdbarch_tdep): Define.
        (mn10300_generic_register_names, am33_register_names): Convert to
        functions.
        (set_machine_hook): Delete.
        (register_name): New function.
        (mn10300_register_name): Delete.
        (mn10300_dump_tdep, mn10300_gdbarch_init): New functions.
        (_initialize_mn10300_tdep): Call register_gdbarch_init instead of
        specify_exec_file_hook.
        (AM33_MODE): Define.
        (set_movm_offsets): Update.
        
2000-08-10  Mark Kettenis  <kettenis@gnu.org>

        Adapt support for SSE registers in Linux/x86 for Linux 2.4.
        * i386-linux-nat.c: Various doc fixes.  Include "i387-nat.h".
        (GETFPXREGS_SUPPLIES): Renamed from GETXFPREGS_SUPPLIES.
        (have_ptrace_getfpxregs): Renamed from have_ptrace_getxfpregs.
        (convert_to_gregset): Removed.  Moved logic to ...
        (fill_gregset): ... here.  Simplified function.
        (fetch_regs): Use perror_with_name for error reporting.
        (store_regs): Add `regno' parameter.  Use perror_with_name for
        error reporting.  Call fill_gregset instead of convert_to_gregset.
        (FPREG_ADDR): Remove.
        (supply_fpregset): Implement by calling i387_supply_fsave.
        (convert_to_fpregset): Remove.
        (fill_fpregset): Implement by calling i387_fill_fsave.
        (fetch_fpregs): Use perror_with_name fro error reporting.
        (store_fpregs) Add `regno' parameter.  Use perror_with_name fro
        error reporting.  Call fill_fpregset instead of
        convert_to_fpregset.
        (supply_xfpregset, convert_to_xfpregset): Removed.
        (supply_fpxregset, fill_fpxregset): New functions.
        (fetch_fpxregs): Renamed from fetch_xfpregs.  Use perror_with_name
        for error reporting.  Call supply_fpxregset instead of
        supply_xfpregset.
        (store_xfpregs): Removed.
        (store_fpxregs): New function.
        (fetch_inferior_registers): Adjust for xfp -> fpx change.  Tweak
        message in call to internal_error.
        (store_inferior_registers): Adjust for xfp ->fpx change.  Pass
        REGNO to store_regs, store_fpregs and store_fpxregs.
        (fetch_core_registers): Adjust for xfp -> fpx change.
        * acconfig.h (HAVE_PTRACE_GETFPXREGS): Renamed from
        HAVE_PTRACE_GETXFPREGS.
        * config.in: Regenerated.
        * configure.in: Replace check for PTRACE_GETXFPREGS with check for
        PTRACE_GETFPXREGS.  Remove comment about Cygnus SSE extensions.
        * configure: Regenerated.
        * config/i386/linux.mh (NATDEPFILES): Add i387-nat.o.
        * config/i386/tm-linux.h: Base definition of HAVE_SSE_REGS on
        HAVE_PTRACE_GETFPXREGS instead of HAVE_PTRACE_GETXFPREGS.

2000-08-10  Andrew Cagney  <cagney@ops1.cygnus.com>

        * regcache.c (TARGET_WRITE_PC, TARGET_READ_PC, TARGET_READ_FP,
        TARGET_WRITE_FP, TARGET_READ_SP, TARGET_WRITE_SP): Move
        initialization from here.
        * gdbarch.sh: To here.
        * gdbarch.h, gdbarch.c: Regenerate.

Thu Aug 10 18:58:04 2000  Andrew Cagney  <cagney@makita.cygnus.com>

        * defs.h (TARGET_BFD_VMA_BIT, TARGET_SHORT_BIT, TARGET_INT_BIT,
        TARGET_LONG_BIT, TARGET_LONG_LONG_BIT, TARGET_FLOAT_BIT,
        TARGET_DOUBLE_BIT, TARGET_LONG_DOUBLE_BIT, TARGET_PTR_BIT): Move
        non- multi-arch handling from here.
        * gdbarch.sh: To here. Update printf gdbarch_update_p.  Make more
        portable.
        * gdbarch.h, gdbarch.c: Regenerate.
        
2000-08-10  Andrew Cagney  <cagney@ops1.cygnus.com>

        * partial-stab.h (DBX_READ): Eliminate redundant check for null
        ``pst''.  Also fixes GCC warning.

2000-08-10  Andrew Cagney  <cagney@ops1.cygnus.com>

        * rs6000-nat.c (set_host_arch): Check value returned by
        gdbarch_update_p.
        * gdbarch.sh (gdbarch_update_p): Rename gdbarch_update.
        * gdbarch.h, gdbarch.c: Regenerate
        * arch-utils.c (set_gdbarch_from_file,
        initialize_current_architecture, set_endian): Update.

2000-08-10  Jimmy Guo  <guo@cup.hp.com>

        * c-lang.c: Set case sensitivity on for c_language_defn,
        cplus_language_defn, and asm_language_defn.
        * ch-lang.c: Set case sensitivity on for chill_language_defn.
        * f-lang.c: Set case sensivitity off for f_language_defn.
        * jv-lang.c: Set case sensitivity on for java_language_defn.
        * language.h: Add enum case_mode, case_sensitivity.
        * language.c: Define case_mode, case_sensitivity.  Set case
        sensitivity on for unknown_language_defn, auto_language_defn,
        and local_language_defn.
        (show_case_command,set_case_command,set_case_str): New static func.
        (set_type_range_case): New static func, replaces set_type_range ().
        (set_language_command,set_type_command,set_range_command,set_language):
        Call set_type_range_case ().
        (language_info): Print case sensitivity setting.
        (_initialize_language): Add set/show commands for 'case-sensitive'.
        Set default case mode 'auto'.  Set default language 'auto'.
        * m2-lang.c: Set case sensitivity on for m2_language_defn.
        * p-lang.c: Set case sensitivity on for pascal_language_defn.
        * scm-lang.c: Set case sensitivity off for scm_language_defn.
        * symtab.c (lookup_symbol): Downcase symbol name if case sensivitity
        is off.

2000-08-10  Jimmy Guo  <guo@cup.hp.com>

        * MAINTAINERS: Change my contact email for hp tests maintainership.

Thu Aug 10 15:28:17 2000  Andrew Cagney  <cagney@ryobi.cygnus.com>

        * sparc-tdep.c (sparc_init_extra_frame_info): Fix number of
        arguments to fetch_instruction.

2000-08-10  Kazu Hirata  <kazu@hxi.com>

        * hppa_tdep.c: Fix a comment typo.
        * gdba.el: Likewise.

2000-08-10  Tom Tromey  <tromey@cygnus.com>

        * MAINTAINERS: Added myself with write-after-approval access.

2000-08-10  J.T. Conklin  <jtc@redback.com>

        * monitor.c (monitor_open): If a dcache has already been created,
        invalidate it rather than creating another.
        * ocd.c (ocd_open): Likewise.
        * remote-nindy.c (nindy_open): Likewise.
        * remote-sds.c (sds_open): Likewise.
        * remote-utils.c (gr_open): Likewise.
        * remote.c (remote_open_1, remote_cisco_open): Likewise.

        * dcache.c (dcache_alloc): Changed to take address of line as an
        argument, and to invalidate cache line before returning.
        (dcache_peek_byte): Updated.
        (dcache_poke_byte): Updated.

2000-08-10  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        From Greg McGary <greg@mcgary.org>:
        * partial-stab.h: Don't crash if pst is null. 

2000-08-10  Mark Kettenis  <kettenis@gnu.org>

        * i387-nat.h (i387_supply_fsave, i387_fill_fsave): Make extern.
        (i387_supply_fxsave, i387_fill_fxsave): New prototypes.
        * i387-nat.c (i387_supply_fsave): Declare `val' as `unsigned int'.
        (fxsave_offset): New variable.
        (FXSAVE_ADDR): New macro.
        (i387_supply_fxsave, i387_fill_fxsave, i387_tag): New functions.

2000-08-08  Tom Tromey  <tromey@cygnus.com>

        * jv-valprint.c (java_value_print): Only print non-null Strings.

2000-08-09  Kevin Buettner  <kevinb@redhat.com>

        * core-sol2.c (fetch_core_registers): Protoize; add prefatory
        comment.
        * corefile.c (specify_exec_file_hook, generic_search): Protoize.

2000-08-09  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * blockframe.c (sigtramp_saved_pc): Use dynamic allocation, 
        since TARGET_PTR_BIT is no longer a constant (MULTI_ARCH).
        * irix4-nat.c (get_longjmp_target): Ditto.
        * irix5-nat.c (get_longjmp_target): Ditto.
        * jv-valprint.c (java_value_print): Ditto.
        * m3-nat.c (get_cprocs):            Ditto.
        * m68k-tdep.c (get_longjmp_target): Ditto.
        * mips-nat.c  (get_longjmp_target): Ditto.
        * mipsv4-nat.c(get_longjmp_target): Ditto.
        * pa64solib.c (read_dynamic_info):  Ditto.
        * solib.c (elf_locate_base):        Ditto.

Mon Aug  7 23:21:22 2000  David Taylor  <taylor@texas.cygnus.com>

        * TODO: remove build_parse entry.

2000-08-07  Kevin Buettner  <kevinb@redhat.com>

        * command.c (add_cmd, add_abbrev_cmd, add_prefix_cmd, 
        add_abbrev_prefix_cmd): Protoize.

2000-08-07  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * objfiles.h (SECT_OFF_BSS): Don't detect invalid sect_index_bss
        here, let the users of the macro do it.
        * symtab.h (ANOFFSET): Detect here if the section index is not
        initialized.
        * xcoffread.c (find_targ_sec): Don't treat .bss as special,
        because some objfiles may not have that section at all.
        * coffread.c (cs_to_section): Ditto.
        * elfread.c (elf_symtab_read): Detect an uninitialized index
        value.
        (elfstab_offset_sections): The macro ANOFFSET cannot be used as an
        lvalue anymore.
        * remote.c (get_offsets, remote_cisco_objfile_relocate): Don't use
        ANOFFSET as an lvalue.
        * objfiles.c (objfile_relocate, objfile_relocate): Don't use
        ANOFFSET as an lvalue.
        * symfile.c (default_symfile_offsets): Don't use ANOFFSET as an
        lvalue.

Mon Aug  7 10:24:30 2000  David Taylor  <taylor@texas.cygnus.com>

        * parse.c (build_parse): don't write off the end of the std_regs
        array.

2000-05-21  Mark Kettenis  <kettenis@gnu.org>

        * solib.c (bfd_lookup_symbol): Fall back on the dynamic symbol
        table if the symbol couldn't be found in the normal symbol table
        (i.e. if the shared object in question was stripped).

2000-08-06  Kevin Buettner  <kevinb@redhat.com>

        * ch-exp.c (parse_opt_name_string): Protoize.  [Thanks to Eli
        Zaretskii for the prefatory comment.]
        * core-regset.c (fetch_core_registers): Protoize; revise
        comment.

2000-08-06  Christopher Faylor  <cgf@cygnus.com>

        * win32-nat.c: Perform various gcc warning cleanups.
        (safe_symbol_file_add_cleanup): Reset stdout to saved stdout, not
        stderr.
        (dll_symbol_command): Pass OBJF_USERLOADED to safe_symbol_file_add.
        (get_child_debug_event): Always reset last_sig.  Always reset inferior
        pid appropriately.
        (do_initial_child_stuff): New function.  Called when attaching or
        starting a new inferior process.
        (child_attach): Use do_initial_child_stuff.
        (child_create_inferior): Ditto.
        * config/i386/cygwin.mh (NAT_FILE): Set to modern location.
        * config/i386/tm-cygwin.h: Define ATTACH_NO_WAIT.

2000-08-05  Eli Zaretskii <eliz@is.elta.co.il>

        * go32-nat.c: (go32_wait): If child_cwd[] is empty, initialize
        it to GDB's current directory.
        (go32_create_inferior, init_go32_ops): Initialize child_cwd[] to
        an empty string, to signal an uninitialized value.
        From Robert Hoehne <robert.hoehne@gmx.net>.

2000-08-04  Kevin Buettner  <kevinb@redhat.com>

        * symtab.h (fixup_psymbol_section): Declare.
        * symtab.c (fixup_psymbol_section): Make extern.
        (fixup_section): Fix up section as well as bfd_section.
        * objfiles.c (objfile_relocate): Call fixup_symbol_section
        or fixup_psymbol_section before attempting to access
        the SYMBOL_SECTION component of a symbol or partial symbol.

2000-08-04  Kevin Buettner  <kevinb@redhat.com>

        * minsyms.c (build_minimal_symbol_hash_tables): New function.
        (compact_minimal_symbols): Don't construct hash tables here.
        (install_minimal_symbols): Instead, construct them here.
        (msymbols_sort): And rebuild them here too.

        * dwarf2read.c (struct comp_unit_head): Add fields offset_size
        and initial_length_size.  Change type of ``length'' field to long.
        (read_initial_length, read_offset): New functions.
        (dwarf2_build_psymtabs_easy): Call read_initial_length() instead
        of just reading 4 bytes.
        (read_comp_unit_head): Likewise; also, call read_offset() to
        fetch the offset instead of just reading 4 bytes.
        (dwarf_decode_lines): Likewise.
        (read_comp_unit_head): Fix internal error message so it
        accurately reflects the function in which the error occurred.
        (dwarf2_build_psymtabs_hard): Properly account for size of the
        initial length field in the section.
        (read_attribute, dwarf2_get_ref_die_offset): Add a case for
        DW_ORM_ref8.
        (dwarf2_build_psymtabs_hard, psymtabs_to_symtab_1): Don't
        assume that the .text section will have index 0 in the
        section_offsets table.

Fri Aug  4 18:00:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote.c (enum Z_packet_type): Define.
        (remote_protocol_Z): Change to an array of size NR_Z_PACKET_TYPES.
        (remote_insert_watchpoint): Check watchpoint type.
        (watchpoint_to_Z_packet): New function.
        (enum packet_result): Define.
        (packet_ok): New function. Return enum packet_result.
        (init_all_packet_configs): New function.
        (remote_open_1, remote_async_open_1, remote_cisco_open): Use
        init_all_packet_configs instead of initializing remote_protocol_P,
        remote_protocol_Z, remote_protocol_binary_download separatly.
        (remote_remove_hw_breakpoint, remote_insert_hw_breakpoint,
        remote_remove_watchpoint, remote_insert_watchpoint): Use
        watchpoint_to_Z_packet and packet_ok.  Remove #ifdef
        TARGET_HAS_HARDWARE_WATCHPOINTS.
        (set_remote_protocol_Z_software_bp_packet_cmd,
        show_remote_protocol_Z_software_bp_packet_cmd,
        set_remote_protocol_Z_hardware_bp_packet_cmd,
        show_remote_protocol_Z_hardware_bp_packet_cmd,
        set_remote_protocol_Z_write_wp_packet_cmd,
        show_remote_protocol_Z_write_wp_packet_cmd,
        set_remote_protocol_Z_read_wp_packet_cmd,
        show_remote_protocol_Z_read_wp_packet_cmd,
        set_remote_protocol_Z_access_wp_packet_cmd,
        show_remote_protocol_Z_access_wp_packet_cmd): New functions.
        (remote_Z_packet_packet_detect): New variable.
        (show_remote_protocol_Z_packet_cmd,
        set_remote_protocol_Z_packet_cmd): Iterate over all ``Z'' packet
        variants.
        (add_packet_config_cmd): Add argument legacy.  Change syntax to
        ``set/show remote FULL_NAME-packet ...'' command.  Add ``set/show
        remote XXX-packet ...'' command using add_alias_cmd when legacy.
        (set_packet_config_cmd): Delete.
        (show_remote_cmd): New function.
        
        * TODO: Update.

Fri Aug  4 14:05:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (infodir, SER_HARDWIRE): Fix merge problems from
        2000-07-07 Michael Snyder <msnyder@cleaver.cygnus.com>.
        
Wed Aug  2 21:15:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh (EXTRA_STACK_ALIGNMENT_NEEDED): Add.
        * gdbarch.h, gdbarch.c: Regenerate.
        * valops.c (hand_function_call): Replace #ifndef
        NO_EXTRA_ALIGNMENT_NEEDED with if EXTRA_STACK_ALIGNMENT_NEEDED.

        * d10v-tdep.c (d10v_gdbarch_init): Set
        extra_stack_alignment_needed to 0.
        * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Delete.
        * config/pa/tm-hppa.h (EXTRA_STACK_ALIGNMENT_NEEDED): Replace
        NO_EXTRA_ALIGNMENT_NEEDED.

2000-08-03  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * MAINTAINERS (m68hc11): Stephane Carrez is maintainer.

2000-08-03  Kevin Buettner  <kevinb@redhat.com>

        * breakpoint.c (bpstat_alloc, map_catch_names,
        map_breakpoint_numbers): Protoize.

Thu Aug  3 15:02:23 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote-mips.c (mips_expect, mips_expect_timeout, common_open,
        fputs_readable): Make string pointer arguments constant.

Thu Aug  3 18:39:10 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS, TODO: Tweeks.

Thu Aug  3 15:46:43 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO (5.1): Update.

2000-08-02  Kevin Buettner  <kevinb@redhat.com>

        * alpha-tdep.c (alpha_extract_return_value): Protoize.

2000-08-02  Jimmy Guo  <guo@hpcleara.cup.hp.com>

        * gdbarch.sh: Add print_p field for CALL_DUMMY_BREAKPINT_OFFSET
        to be printed only if CALL_DUMMY_BREAKPOINT_OFFSET_P.

        * gdbarch.c: Regenerated.

2000-08-02  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * remote-vx.c (vx_add_symbols): Fix typos.

Wed Aug  2 19:15:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * arch-utils.h, gdbarch.c (default_register_sim_regno): New
        function.
        * gdbarch.sh (REGISTER_SIM_REGNO): Add.
        * gdbarch.h, gdbarch.c: Regenerate.
        * remote-sim.c (REGISTER_SIM_REGNO): Delete definition.

        * config/d10v/tm-d10v.h (REGISTER_SIM_REGNO): Delete.
        * d10v-tdep.c (d10v_gdbarch_init): Update.
        (struct gdbarch_tdep): Delete member register_sim_regno.
        (d10v_register_sim_regno): Delete function.

Wed Aug  2 14:46:18 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote.c (enum packet_detect, packet_support_enums,
        packet_support_auto, packet_enable, packet_disable): Delete.
        (show_packet_config_cmd, set_packet_config_cmd,
        init_packet_config): Use add_set_auto_boolean_cmd.
        * TODO: Update.
        
Wed Aug  2 13:06:25 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote-udi.c (udi_xfer_inferior_memory, udi_files_info,
        udi_kill): Update function signatures so that match target vector.
        * MAINTAINERS: Update.

Wed Aug  2 11:04:15 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Updates.

2000-08-01  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * gdbarch.sh: Multiarch DO_REGISTERS_INFO macro.
        * gdbarch.h, gdbarch.c: Regenerate.
        * infcmd.c (do_registers_info): Make not static and
        unconditionalize.
        * inferior.h (do_registers_info): Export.

2000-08-01  Kazu Hirata  <kazu@hxi.com>

        * MAINTAINERS: Add myself to "Write After Approval" list.

Tue Aug  1 21:02:42 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Update list of target maintainers.  List all
        targets explicitly.
        (sh): Elena Zannoni is maintainer.
        (powerpc): Nick Duffek is a maintainer.
        
Tue Aug  1 17:45:12 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh: Parse and save comments in the function_list.  Print
        them out as part of the header.  Convert all function definitions
        to ISO-C form.
        * gdbarch.h, gdbarch.c: Regenerate.
        
Tue Aug  1 14:50:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * top.c (get_prompt_1), tracepoint.c (replace_comma): Update
        function signatures so that they match catch_errors and
        make_cleanup callbacks.

        * tracepoint.c (encode_actions): Fix arguments passed to
        stringify_collection_list.

2000-07-31  Kevin Buettner  <kevinb@redhat.com>

        * ppc-tdep.h: New file.
        * Makefile.in (ppc-linux-tdep.o, rs6000-tdep.o): Add ppc-tdep.h
        as a dependency.
        * ppc-linux-tdep.c, rs6000-tdep.c (ppc-tdep.h): Include.

        * ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Made static.

        * rs6000-tdep.c (elf-bfd.h): Include.
        (gdbarch_tdep): Add field osabi to this struct.
        (rs6000_init_extra_frame_info, rs6000_frame_init_saved_regs,
        rs6000_frameless_function_invocation, rs6000_frame_saved_pc,
        rs6000_frame_chain): No longer static.
        (process_note_abi_tag_sections, get_elfosabi): New static
        functions.
        (rs6000_gdbarch_init): Revised to accomodate ELF executables;
        also use Linux specific methods when the target is Linux.

        * config/powerpc/aix.mt, config/powerpc/cygwin.mt,
        config/powerpc/macos.mt, config/powerpc/nbsd.mt,
        config/powerpc/ppc-eabi.mt, config/powerpc/ppc-nw.mt,
        config/powerpc/ppc-sim.mt, config/powerpc/ppcle-eabi.mt,
        config/powerpc/ppcle-sim.mt, config/powerpc/solaris.mt,
        config/powerpc/vxworks.mt, config/rs6000/aix4.mt,
        config/rs6000/rs6000.mt, config/rs6000/rs6000lynx.mt
        (TDEPFILES): Add ppc-linux-tdep.o.

        * config/tm-linux.h (SIGCONTEXT_PC_OFFSET, FRAME_SAVED_PC,
        INIT_EXTRA_FRAME_INFO, FRAMELESS_FUNCTION_INVOCATION,
        FRAME_INIT_SAVED_REGS, FRAME_CHAIN, PUSH_ARGUMENTS,
        MEMORY_REMOVE_BREAKPOINT: Removed defines.
        (ppc_linux_frame_saved_pc, ppc_linux_init_extra_frame_info,
        ppc_linux_frameless_function_invocation,
        ppc_linux_frame_init_saved_regs, ppc_linux_frame_chain,
        ppc_sysv_abi_push_arguments, ppc_linux_memory_remove_breakpoint):
        Removed declarations.
        (CANNOT_FETCH_REGISTER, CANNOT_STORE_REGISTER): Disabled.

        * dink32-rom.c (dink32_regnames): Make array size implicit.

        * ppc-bdm.h (ppc-tdep.h): Include.

        * rs6000-tdep.c, ppc-linux-tdep.c, ppc-bdm.h, ppc-tdep.h
        (GP0_REGNUM, TOC_REGNUM, PS_REGNUM, CR_REGNUM, LR_REGNUM,
        CTR_REGNUM, XER_REGNUM, MQ_REGNUM): Add PPC_ prefix.

        From Nick Duffek:
        * ppc-tdep.h (ppc_linux_frame_saved_pc, rs6000_frame_saved_pc):
        Change return type to CORE_ADDR.
        * ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Likewise.

2000-07-31  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * sh-tdep.c (sh_push_arguments): Make header match prototype.

        * remote-e7000.c (e7000_start_remote): Use void *, not char * as
        parameter to avoid compiler warning.
        (fetch_regs_from_dump): Call get_hex() with the correct number of
        parameters.

2000-07-31  Eli Zaretskii  <eliz@is.elta.co.il>

        * config/djgpp/fnchange.lst: Add file mappings as per last weekly
        snapshot.

2000-07-29  Kevin Buettner  <kevinb@redhat.com>

        * a29k-tdep.c, a68v-nat.c, abug-rom.c, alpha-nat.c,
        alpha-tdep.c, annotate.c, arc-tdep.c, arch-utils.c, ax-gdb.c,
        ax-general.c, blockframe.c, breakpoint.c, buildsym.c,
        c-lang.c, c-typeprint.c, c-valprint.c, ch-exp.c, ch-lang.c,
        ch-typeprint.c, ch-valprint.c, cli-out.c, coff-solib.c,
        coffread.c, command.c, complaints.c, copying.c, core-aout.c,
        core-regset.c, core-sol2.c, corefile.c, corelow.c,
        cp-valprint.c, cpu32bug-rom.c, cxux-nat.c, d10v-tdep.c,
        d30v-tdep.c, dbug-rom.c, dbxread.c, dcache.c, delta68-nat.c,
        demangle.c, dink32-rom.c, dpx2-nat.c, dsrec.c, dstread.c,
        dve3900-rom.c, dwarf2read.c, dwarfread.c, elfread.c,
        environ.c, eval.c, event-top.c, exec.c, expprint.c, f-lang.c,
        f-typeprint.c, f-valprint.c, findvar.c, fork-child.c,
        fr30-tdep.c, gdbarch.c, gdbserver/gdbreplay.c,
        gdbserver/low-hppabsd.c, gdbserver/low-linux.c,
        gdbserver/low-lynx.c, gdbserver/low-nbsd.c,
        gdbserver/low-sim.c, gdbserver/low-sparc.c,
        gdbserver/low-sun3.c, gdbserver/remote-utils.c,
        gdbserver/utils.c, gdbtypes.c, gnu-nat.c, h8300-tdep.c,
        h8500-tdep.c, hp-psymtab-read.c, hp-symtab-read.c,
        hp300ux-nat.c, hppa-tdep.c, hppab-nat.c, hppah-nat.c,
        hppam3-nat.c, hpread.c, hpux-thread.c, i386-linux-nat.c,
        i386-stub.c, i386-tdep.c, i386aix-nat.c, i386b-nat.c,
        i386ly-tdep.c, i386m3-nat.c, i386mach-nat.c, i386nbsd-nat.c,
        i386v-nat.c, i386v4-nat.c, i387-tdep.c, i960-tdep.c,
        ia64-linux-nat.c, ia64-tdep.c, infcmd.c, inflow.c,
        infptrace.c, infrun.c, inftarg.c, infttrace.c, irix4-nat.c,
        irix5-nat.c, jv-lang.c, jv-typeprint.c, jv-valprint.c,
        kdb-start.c, kod-cisco.c, kod.c, language.c, lin-thread.c,
        linux-thread.c, lynx-nat.c, m2-lang.c, m2-typeprint.c,
        m2-valprint.c, m3-nat.c, m32r-rom.c, m32r-stub.c, m32r-tdep.c,
        m68hc11-tdep.c, m68k-stub.c, m68k-tdep.c, m68klinux-nat.c,
        m68knbsd-nat.c, m88k-nat.c, m88k-tdep.c, mac-nat.c,
        mac-xdep.c, maint.c, mcore-rom.c, mcore-tdep.c, mdebugread.c,
        mem-break.c, mi/mi-cmds.c, mi/mi-main.c, mi/mi-out.c,
        mi/mi-parse.c, minsyms.c, mips-nat.c, mips-tdep.c,
        mipsm3-nat.c, mipsread.c, mipsv4-nat.c, mn10200-tdep.c,
        mn10300-tdep.c, mon960-rom.c, monitor.c, news-xdep.c,
        nindy-tdep.c, nlm/gdbserve.c, nlm/i386.c, nlm/ppc.c,
        nlmread.c, ns32k-tdep.c, ns32km3-nat.c, ns32knbsd-nat.c,
        objfiles.c, ocd.c, op50-rom.c, os9kread.c, osfsolib.c,
        p-lang.c, p-typeprint.c, p-valprint.c, pa64solib.c, parse.c,
        ppc-bdm.c, ppc-linux-nat.c, ppc-linux-tdep.c, ppcbug-rom.c,
        ppcnbsd-nat.c, printcmd.c, proc-api.c, proc-events.c,
        proc-flags.c, proc-why.c, procfs.c, ptx4-nat.c,
        remote-adapt.c, remote-array.c, remote-bug.c, remote-e7000.c,
        remote-eb.c, remote-es.c, remote-est.c, remote-hms.c,
        remote-mips.c, remote-mm.c, remote-nindy.c, remote-nrom.c,
        remote-os9k.c, remote-rdi.c, remote-rdp.c, remote-sds.c,
        remote-sim.c, remote-st.c, remote-udi.c, remote-utils.c,
        remote-vx.c, remote-vx29k.c, remote-vx68.c, remote-vx960.c,
        remote-vxmips.c, remote-vxsparc.c, remote.c, rom68k-rom.c,
        rs6000-tdep.c, scm-exp.c, scm-lang.c, scm-valprint.c,
        ser-e7kpc.c, ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c,
        sh-stub.c, sh-tdep.c, sh3-rom.c, sol-thread.c, solib.c,
        somread.c, somsolib.c, source.c, sparc-nat.c, sparc-stub.c,
        sparc-tdep.c, sparcl-stub.c, sparcl-tdep.c, sparclet-rom.c,
        sparclet-stub.c, stabsread.c, stack.c, standalone.c,
        stop-gdb.c, stuff.c, sun3-nat.c, sun386-nat.c, symfile.c,
        symm-nat.c, symm-tdep.c, symmisc.c, symtab.c, target.c,
        thread.c, tic80-tdep.c, top.c, tracepoint.c, tui/tui-file.c,
        tui/tui.c, tui/tuiLayout.c, tui/tuiRegs.c, tui/tuiStack.c,
        tui/tuiWin.c, typeprint.c, ui-file.c, ui-out.c, ultra3-nat.c,
        ultra3-xdep.c, umax-xdep.c, utils.c, v850-tdep.c, v850ice.c,
        valarith.c, valops.c, valprint.c, values.c, varobj.c,
        vax-tdep.c, w65-tdep.c, w89k-rom.c, win32-nat.c, wince.c,
        wrapper.c, xcoffread.c, xcoffsolib.c, xmodem.c, z8k-tdep.c: 
        Convert old-style, pre-ISO function definitions to prototyped
        form.

2000-07-28  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * sh-tdep.c (sh_gdbarch_init): For sh4 initialize
        register_convert_to_raw, register_convert_to_virtual,
        register_convertible.
        (sh_sh4_register_convertible): New function.
        (sh_sh4_register_convert_to_virtual): New function.
        (sh_sh4_register_convert_to_raw): New function.
        Include floatformat.h.

Thu Jul 27 14:06:27 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-06-25 Stephane Carrez <Stephane.Carrez@worldnet.fr>:
        * configure.tgt: Recognize the 68hc11.
        * m68hc11-tdep.c: New file for 68hc11 target.
        * config/m68hc11/m68hc11.mt: New file for 68hc11 port.
        
        * configure.tgt: When 68hc11, set gdb_multi_arch.

Wed Jul 26 17:22:53 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (GDB_MULTI_ARCH): Define from configure.tgt
        or makefile fragment.
        * acconfig.h (GDB_MULTI_ARCH): Add.
        * config.in, configure: Regenerate.
        
        * gdbarch.sh (GDB_MULTI_ARCH): Delete definition, moved to
        configure.in and defs.h.  Use GDB_MULTI_ARCH_TM,
        GDB_MULTI_ARCH_PARTIAL and GDB_MULTI_ARCH_PURE in tests.
        * gdbarch.h, gdbarch.c: Regenerate.

        * defs.h (GDB_MULTI_ARCH_PARTIAL, GDB_MULTI_ARCH_TM, ,
        GDB_MULTI_ARCH_PURE): Define.  Only include "tm.h" when the target
        is less than pure multi-arch.

2000-07-26  Jimmy Guo       <guo@cup.hp.com>

        * config/convex/tm-convex.h: Remove stray control characters.
        * config/m68k/tm-altos.h: Ditto.
        * config/tahoe/tm-tahoe.h: Ditto.

2000-07-26  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * sh-tdep.c (sh_sh4_register_name, sh_sh4_register_byte,
        sh_sh4_register_raw_size, sh_sh4_register_virtual_type,
        sh_fetch_pseudo_register, sh_store_pseudo_register,
        sh_do_pseudo_register, sh_gdbarch_init): Fix names for pseudoregs,
        they should be numbered as drx fvy where x and y are multiples of
        2 and 4 respectively.
        
        * config/sh/tm-sh.h: Fix names of pseudo regs.

2000-07-24  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * config/sh/tm-sh.h (struct gdbarch_tdep): Add sh4 specific
        pseudo registers.
        (DO_REGISTERS_INFO): Define.

        * sh-tdep.c (sh_sh4_register_name): New function.
        (sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
        sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update
        signature.
        (sh_show_regs_command): New function. Actual function called by
        the 'regs' command.
        (sh_register_byte): Rename to...
        (sh_default_register_byte): ...New function.
        (sh_sh4_register_byte): New function.
        (sh_register_raw_size): Rename to...
        (sh_default_register_raw_size): ...New function.
        (sh_sh4_register_raw_size): New function.
        (sh_sh4_register_virtual_type): New function.
        (sh_sh4_build_float_register_type): New function.
        (sh_fetch_pseudo_register, sh_store_pseudo_register): New
        functions.
        (fv_reg_base_num, dr_reg_base_num): New functions.
        (do_fv_register_info, do_dr_register_info, sh_do_pseudo_register,
        sh_do_fp_register, sh_do_register, sh_print_register,
        sh_do_registers_info): New functions.
        (sh_gdbarch_init): Initialize sh4 pseudo registers to -1. Update
        architecture specific parts.
        (_initialize_sh_tdep): Use sh_show_regs_command for 'regs' command.

2000-07-24  Jim Blandy  <jimb@redhat.com>

        * dwarf2read.c (read_structure_scope): Correct overzealous
        addition of cu_header argument.

Mon Jul 24 07:47:46 2000  Anthony Green  <green@redhat.com>

        * TODO: Update.  Two of my java patches are in. 

2000-07-24  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

         * gdbarch.sh: Add FETCH_PSEUDO_REGISTER and STORE_PSEUDO_REGISTER
         to the gdbarch structure.
         * gdbarch.c: Regenerate.
         * gdbarch.h: Regenerate.
         * inferior.h (FETCH_PSEUDO_REGISTER, STORE_PSEUDO_REGISTER):
         Delete macros.
         * regcache.c (write_register, read_register, write_register_bytes,
         write_register_gen, read_register_bytes, read_register_gen):
         Rename ARCH_FECTH_PSEUDO_REGISTERS to FETCH_PSEUDO_REGISTERS and
         ARCH_STORE_PSEUDO_REGISTER to STORE_PSEUDO_REGISTER.

2000-07-24  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * gdbarch.sh: Add NUM_PSEUDO_REGS to the gdbarch structure.
        * gdbarch.c: Regenerate. 
        * gdbarch.h: Regenerate.
        * inferior.h (NUM_PSEUDO_REGS): Delete macro.

Sun Jul 23 21:40:55 2000  Anthony Green  <green@redhat.com>

        * language.c: Include jv-lang.h.
        (lang_bool_type): Add case for java booleans.

Mon Jul 24 11:23:14 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * dwarf2read.c (address_size): Delete file wide global.
        (struct comp_unit_head): Add signed_addr_p;
        (read_comp_unit_head): New function.
        (psymtab_to_symtab_1, dwarf2_build_psymtabs_hard): Use
        read_comp_unit_head to parse the debug_info header.
        (read_address): Add parameters cu_header and bytes_read.  When
        specified, sign extend the address.
        
        * dwarf2read.c (add_partial_symbol, decode_locdesc,
        die_containing_type, die_type, dwarf_decode_lines,
        dwarf2_add_field, dwarf2_add_member_fn,
        dwarf2_build_psymtabs_hard, dwarf2_const_value, new_symbol,
        process_die, psymtab_to_symtab_1, read_array_type,
        read_enumeration, read_attribute, read_common_block,
        read_comp_unit, read_file_scope, read_full_die, read_func_scope,
        read_lexical_block_scope, read_partial_die, scan_partial_symbols,
        read_structure_scope, read_subroutine_type, read_tag_const_type,
        read_tag_pointer_type, read_tag_ptr_to_member_type,
        read_tag_reference_type, read_type_die, read_typedef,
        tag_type_to_type): Pass cu_header parameter.

2000-07-21  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * regcache.c (read_register, read_register_bytes): Fix typos.

2000-07-21  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * thread.c (thread_apply_all_command): Update thread list first.
        * printcmd.c (printf_command): Guard against 0-length string.
        * config/i386/tm-i386.h: treat PC and FP as unsigned.
        (SAVED_PC_AFTER_CALL): Use read_memory_unsigned_integer.
        (FRAME_SAVED_PC): Ditto.
        (FRAME_CHAIN): Ditto.

2000-07-20  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * valarith.c (value_sub): Call check_typedef.

2000-07-19  Nicholas Duffek  <nsd@redhat.com>

        * thread.c (free_thread): New function.
        (init_thread_list): Always zero highest_thread_num.  Call
        free_thread() instead of free().
        (delete_thread): Move thread cleanup code to free_thread().

2000-07-19  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        Multiarch the sh target.
        * sh-tdep.c:
        (sh_generic_reg_names, sh_reg_names,sh3_reg_names, sh3e_reg_names,
        sh_dsp_reg_names, sh3_dsp_reg_names, sh_processor_type_table):
        Remove.
        (XMALLOC): Define.
        (struct frame_extra_info): Define.
        (sh_register_raw_size, sh_register_virtual_size,
        sh_register_virtual_type, sh_register_byte, sh_breakpoint_from_pc,
        sh_frame_saved_pc, sh_skip_prologue,
        sh_nofp_frame_init_saved_regs, sh_fp_frame_init_saved_regs,
        sh_extract_struct_value_address, sh_use_struct_convention,
        sh_store_struct_return, sh_push_arguments, sh_push_return_address,
        sh_saved_pc_after_call, sh_generic_register_name,
        sh_sh_register_name, sh_sh3_register_name, sh_sh3e_register_name,
        sh_sh_dsp_register_name, sh_sh3_dsp_register_name,
        sh_frame_args_address, sh_frame_locals_address,
        sh_coerce_float_to_double, sh_default_store_return_value,
        sh3e_sh4_store_return_value, sh_generic_show_regs,
        sh3_show_regs,sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs,
        sh_dsp_show_regs, sh_register_byte, sh_register_raw_size,
        sh_register_virtual_size, sh_sh3e_register_virtual_type,
        sh_default_register_virtual_type, sh_gdbarch_init): New functions.
        (sh_target_architecture_hook, sh_frame_find_saved_regs,
        sh_show_regs): Delete functions.
        (sh_frame_chain, sh_find_callers_reg, sh_init_extra_frame_info,
        sh_pop_frame, sh_extract_return_value): Update

        * config/sh/tm-sh.h (GDB_MULTI_ARCH): Define to 1.
        (struct gdbarch_tdep): Define.
        Remove all unnecessary defines.         

        * remote-e7000.c ({PR,GBR,SR,MACL,VBR,MACH}_REGNUM): Define to -1,
        for h8300 case.
        (want_sh,want_nopc_sh,want_nopc_sh3): Make nomenclature
        consistent.
        (e7000_fetch_registers): Remove ifdef GDB_TARGET_IS_SH, use
        runtime check instead.
        (e7000_wait): Ditto.

        * sh3-rom.c (sh3_supply_register): Use gdbarch_tdep to get the SSR
        and SPC register numbers.
        (sh3_regnames, sh3e_regnames): Don't specify a size.

        * config/h8300/tm-h8300.h: Add comment.

Wed Jul 19 12:50:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * solib.c (elf_locate_base, info_sharedlibrary_command): Rename
        bfd_elf_get_arch_size to bfd_get_arch_size.

Tue Jul 18 17:13:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Richard Henderson <rth@cygnus.com>:
        * dwarf2read.c (dwarf2_empty_hash_tables): Renamed from
        dwarf2_empty_die_ref_table; zero dwarf2_cached_types as well.
        Update all callers.

2000-07-17  Daniel Berlin  <dberlin@redhat.com>

        * valops.c (value_struct_elt): Change error message

2000-07-17  matthew green  <mrg@redhat.com>

        * config/sparc/nm-nbsd.h (GDB_GREGSET_T, GDB_FPREGSET_T): Define.

Mon Jul 17 13:08:10 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * values.c (value_as_pointer): When VAL is an integer, explictly
        cast to a pointer before converting to a CORE_ADDR.
        * gdbtypes.c (build_gdbtypes): For builtin_type_ptr, construct a
        real void pointer instead of an integer.

2000-07-15  Daniel Berlin  <dberlin@redhat.com>

        * valops.c (typecmp):  Seperate loop into two, add support for
        references. This way, we can  say a reference to a pointer to a
        char is compatible with a pointer to a char. Before, this would
        not be true.

2000-07-14  Nicholas Duffek  <nsd@redhat.com>

        * ppcbug-rom.c (ppcbug_regnames[]): Make array size implicit.
        * rs6000-tdep.c (DEFAULT_LR_SAVE): Move to config/*/tm-*.h.
        (rs6000_gdbarch_init): Use generic_pc_in_call_dummy instead of
        rs6000_pc_in_call_dummy.
        * config/rs6000/tm-rs6000.h (DEFAULT_LR_SAVE): Move here from
        rs6000-tdep.c.
        * config/powerpc/tm-ppc-eabi.h: Remove various definitions
        handled by multi-arched rs6000-tdep.c.

2000-07-14  Nick Clifton  <nickc@cygnus.com>

        * config/mcore/tm-mcore.h (SKIP_PROLOGUE): Fix defintion to avoid
        assignment.

2000-07-13  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * parse.c: Include inferior.h.

2000-07-12  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * regcache.c (registers_changed, registers_fetched): Use 
        ARCH_NUM_REGS directly, eliminating an unnecessary variable.

        This change adds pseudo-register capability to GDB.
        Pseudo-registers are handled like registers, but they
        don't come from or live on the target.  They may be 
        aliases for an existing register, or they may be computed.
        * inferior.h (NUM_PSEUDO_REGISTERS): Define default of zero.
        (ARCH_FETCH_PSEUDO_REGISTERS): Define default of no-op.
        (ARCH_STORE_PSEUDO_REGISTERS): Define default of no-op.
        # regcache.c (registers_changed): Mark pseudo-registers 
        invalid, as well as real registers.
        (registers_fetched): Do not mark pseudo-registers as fetched
        at the same time as other (real) registers.
        (read_register_bytes): Fetch pseudo-registers (if any) from
        the target architecture module instead of from the target.
        (read_register_gen): Ditto.
        (read_register): Ditto.
        (write_register_bytes): Store pseudo-registers (if any) to
        the target architecture module instead of to the target.
        (write_register_gen): Ditto.
        (write_register): Ditto.
        (build_regcache): Allocate enough register_valid space for
        pseudo-registers as well as normal (real) ones.
        * parse.c (target_map_name_to_register): Include pseudo-regs.
        
Tue Jul 11 19:45:42 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * valops.c (value_cast): Allow cast from INT, ENUM or RANGE to
        POINTER.

2000-07-11  Scott Bambrough <scottb@netwinder.org>

        * command.c (do_setshow_command): Fix typo in var_auto_boolean
        case.

Tue Jul 11 20:38:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c: General cleanup.  Delete all #if 0 code.  Convert
        all old style K&R function definitions to ISO-C.
        (struct gdbarch_tdep): Add mips_abi_string.
        (mips_gdbarch_init): Initialize.
        (mips_dump_tdep): Print mips_abi_string and other values.
        (mips_push_arguments): Add more detailed tracing.

Tue Jul 11 20:16:09 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (mips32_next_pc, mips16_next_pc,
        read_next_frame_reg, mips_push_dummy_frame, mips_skip_stub,
        mips_saved_pc_after_call): Use read_signed_register when
        extracting register value.  Ensures all addresses are sign
        extended.
        (mips_read_pc): New function.  Return sign extended address.
        (mips_gdbarch_init): Set gdbarch_read_pc.

Tue Jul 11 19:06:29 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote-mips.c (mips_request): Change all arguments to ULONGEST.
        (mips_exit_debug, mips_resume, mips_initialize, mips_wait,
        mips_fetch_registers, mips_store_registers, mips_fetch_word):
        Update.
        (mips_xfer_memory): When mask_address_p, mask MEMADDR down to just
        32 bits.
        (_initialize_remote_mips): Add ``set mask-address'' command.

        * mips-tdep.c (_initialize_mips_tdep): Replace "set mask-address"
        with "set mips mask-address".  Implement using
        add_set_auto_boolean_cmd.
        (struct gdbarch_tdep): Add default_mask_address_p.
        (mips_mask_address_p, show_mask_address): New functions.
        (mips_addr_bits_remove): Use mips_mask_address_p() to determine if
        masking is needed.
        (mips_gdbarch_init): Set default_mask_address_p to zero.
        (mips_dump_tdep): Print value of mask_address_p.

Tue Jul 11 18:32:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * printcmd.c (print_scalar_formatted): Move masking of 'a' address
        from here.
        (print_address_numeric): To here.
        * TODO: Update.

Tue Jul 11 17:50:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * symtab.c: Use paddr_nz() to print addresses.

Tue Jul 11 12:52:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * value.h (read_register, read_signed_register): Change return
        type to ULONGEST.
        (read_signed_register, read_signed_register_pid): Declare.

        * regcache.c (read_register, read_register_pid): Update.
        (read_signed_register_pid, read_signed_register): New functions.
        
Mon Jul 10 18:06:18 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (mips_push_arguments): Always align struct_addr on a
        16 byte boundary. Align allocated argument space using
        MIPS_STACK_ARGSIZE.  Reserve space on stack for the struct return
        and floating-point registers.  Use fp_register_arg_p to determine
        if float_argreg should be aligned.

2000-07-10  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * config/sh/tm-sh.h (STORE_RETURN_VALUE): Redefine as
        sh_store_return_value().
        * sh-tdep.c (sh_store_return_value): New function. Store the
        value returned by a function into the appropriate register.

2000-07-10  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * sh-tdep.c (sh_skip_prologue): Before looking at the actual
        instructions, try to see if the symbol table can be of help, by
        calling after_prologue(). If this doesn't work, call
        skip_prologue_hard_way().
        (skip_prologue_hard_way): Renamed from sh_skip_prologue. Add some
        more instruction pattern matching for pushing of arguments, and
        manipulation of r14.
        (after_prologue): New function. Use symbol table info to determine
        the end of the prologue, if possible.

2000-07-07  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * findvar.c (_initialize_findvar, build_findvar, write_fp, read_fp,
        generic_target_write_fp, generic_target_read_fp, write_sp, read_sp,
        generic_target_write_sp, generic_target_read_sp, write_pc, read_pc,
        generic_target_write_pc, generic_target_read_pc, write_pc_pid, 
        read_pc_pid, supply_register, write_register_pid, write_register,
        read_register_pid, read_register, write_register_bytes, 
        read_register_bytes, write_register_gen, read_register_gen, 
        registers_fetched, registers_changed, find_saved_register, 
        read_relative_register_raw_bytes, default_get_saved_register, 
        read_relative_register_raw_bytes_for_frame, get_saved_register):
        Move from this file into new file regcache.c.
        (register_valid, registers_pid, registers): Ditto.
        * regcache.c: New file to hold the register cache.
        (register_cached): New function to read register_valid array.
        * value.h (register_cached): Declare.
        * defs.h (default_get_saved_register): Delete decl of static function.
        * Makefile.in: Add regcache module.
        
Mon Jul 10 15:02:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-07-05 Pierre Muller <muller@ics.u-strasbg.fr>:
        * p-typeprint.c (pascal_type_print_method_args): Add braces around
        isdigit after while keyword.

2000-07-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * TODO: Remove readline 4.1 import item.

2000-07-09  Nick Duffek  <nsd@redhat.com>

        * gdbtypes.c (is_ancestor): Infer type equivalence from name
        equivalence.
        (rank_one_type): Use strcmp instead of == to compare type names.
        Don't swap parm with arg when checking TYPE_CODE_REF types.
        * valops.c (find_overload_match): Fix indentation.  Compare
        parameter rankings to 0..9, 10..99, and 100+ instead of 0, 10,
        and 100.

2000-07-07  David Edelsohn  <edelsohn@gnu.org>

        * xcoffread.c (read_symbol_nvalue): Return CORE_ADDR.
        * rs6000-tdep.c (rs6000_pop_frame): Make addr CORE_ADDR type.

Fri Jul  7 18:29:51 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/mips/tm-mips.h (IEEE_FLOAT, SKIP_PROLOGUE,
        SAVED_PC_AFTER_CALL, DECR_PC_AFTER_BREAK, BREAKPOINT_FROM_PC,
        INNER_THAN): Macros.

        * mips-tdep.c (mips_in_lenient_prologue): Delete function.
        (mips32_skip_prologue, mips16_skip_prologue, mips_skip_prologue):
        Remove ``lenient'' argument.
        (mips_saved_pc_after_call): New function.
        (mips_gdbarch_init): Initialize gdbarch members inner_than,
        breakpoint_from_pc, decr_pc_after_break, ieee_float,
        skip_prologue, saved_pc_after_call.

2000-07-07  Mark Kettenis  <kettenis@gnu.org>

        * config/i386/tm-linux.h: Add longjmp support.
        (JB_ELEMENT_SIZE, JB_PC): New defines.
        (GET_LONGJMP_TARGET): Define.
        (get_longjmp_target): Add prototype.

        * breakpoint.c (bpstat_what): Keep returning
        BPSTAT_WHAT_SET_LONGJMP_RESUME when hitting multiple longjmp()
        breakpoints instead of signalling an error by returning
        BPSTAT_WHAT_STOP_NOISY.

2000-07-06  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * mips-tdep.c: Replace '16' with bfd_mach_mips16 where appropriate.

2000-07-06  Christopher Faylor  <cgf@cygnus.com>

        * infcmd.c (attach_command): Move "stop_soon_quietly" setting
        inside ATTACH_NO_WAIT conditional since we are not about to
        stop soon if we're not calling wait_for_inferior.

Wed Jul  5 21:06:39 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/i386/fbsd.mh (NATDEPFILES): Keep NATDEPFILES to a single
        line.  configure.in assumes this.

Wed Jul  5 20:48:22 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (SER_HARDWIRE): When go32 or DJGPP, set to
        ser-go32.c.
        * configure: Re-generate.
        
Wed Jul  5 20:28:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * top.h (command_loop_marker), top.c (command_loop_marker):
        Delete.
        * event-top.c (command_handler), top.c (simplified_command_loop,
        command_loop): Use null_cleanup instead of command_loop_marker.

Wed Jul  5 20:09:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * event-loop.c: Include either <poll.h> or <sys/poll.h>.

        * configure.in (targ_archs): Check for <poll.h> and <sys/poll.h>.
        * configure, config.in: Re-generate.
        
Wed Jul  5 18:10:44 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-06-12 Bill Nottingham <notting@redhat.com>:
        * Makefile.in: add $(infodir) to FLAGS_TO_PASS
        
Wed Jul  5 18:03:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Updates.

2000-07-05  Mark Kettenis  <kettenis@gnu.org>

        * TODO: Update.

2000-07-03  Chris Faylor  <cfg@cygnus.com>

        Committed by Elena Zannoni <ezannoni@cygnus.com>
        * sh-tdep.c (sh_skip_prologue): Change prologue matching for modern
        compilers.
        (sh_frame_find_saved_regs): Ditto.
        (sh_find_callers_reg): Stop if pc is zero.

Sat Jul  1 17:47:08 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * ser-unix.c (do_unix_readchar): Revert Tue Mar 28 18:19:50 2000
        Andrew Cagney <cagney@b1.cygnus.com>.  Locks up when no data is
        pending.

Sat Jul  1 15:40:14 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (SER_HARDWIRE): Restore code to set it by configure.

2000-06-26  Kevin Buettner  <kevinb@redhat.com>

        * copying.awk: Eliminate use of PARAMS from this file.

Fri Jun 23 20:47:03 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (mips_push_arguments): Use the variable stack_used_p
        to determine if any arguments were written to the stack.  Do not
        rely on NUMARG>=8.

Mon Jun 19 11:29:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * command.h (add_set_auto_boolean_cmd): Add declaration.
        (enum var_types): Add var_auto_boolean.

        * command.c (add_set_auto_boolean_cmd): New function.
        (do_setshow_command): Recognize auto_boolean.
        (parse_binary_operation): Recognize enable and disable.
        (parse_auto_binary_operation): Parse auto binary variables.

        * TODO: Update

Fri Jun 23 16:20:21 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (fp_register_arg_p): New function.
        (mips_push_arguments): Use.  Do not pass floating point arguments
        on in an integer register.

2000-06-21  Pierre Muller  <muller@ics.u-strasbg.fr>

        * symfile.c (init_filename_language_table): add ".pas", ".p" and ".pp"
        as pascal source file extensions.

2000-06-19  J.T. Conklin  <jtc@redback.com>

        * remote-nindy.c (nindy_fetch_word, nindy_store_word): Removed
        (nindy_xfer_inferior_memory): Use dcache_xfer_memory() instead of
        breaking transfer into chunks and using nindy_fetch_word() and
        nindy_store_word().

        * remote-bug.c (bug_xfer_memory): Use dcache_xfer_memory() instead
        of breaking transfer into chunks and using gr_fetch_word() and
        gr_store_word().

        * remote.c (remote_fetch_word, remote_store_word): Removed.

        * remote-utils.h (gr_fetch_word, gr_store_word): Removed.
        * remote-utils.c (gr_fetch_word, gr_store_word): Removed.

        * dcache.h (dcache_fetch, dcache_poke, dcache_poke_block): Removed.
        * dcache.c (dcache_fetch, dcache_poke): Removed.

2000-06-16  Pierre Muller  <muller@ics.u-strasbg.fr>

        * defs.h: define language_pascal in language enumeration.
        * language.h: define _LANG_pascal macro.
        * language.c: add language_pascal support in all language dependant
   functions.

Sun Jun 18 01:01:09 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (mips_debug): New variable.
        (_initialize_mips_tdep): Add command "set debug mips".
        (mips_push_arguments): Add code to dump the argument list as it is
        created.

Sun Jun 18 00:27:15 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (mips_push_arguments): For MIPS_EABI, squeeze a
        strut containing a floating-point into an FP register.

Sat Jun 17 16:00:56 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote-mips.c: Include <ctype.h>
        (mips_receive_header): Write printable characters to gdb_stdtarg
        instead of gdb_stdlog.  Only count non-printables as invalid.
        (mips_syn_garbage): Reduce to 10.

Sat Jun 17 15:39:28 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (mips_gdbarch_init): When the object file header
        specifies EABI64, select EABI64 and not EABI32.

2000-06-16  Nicholas Duffek  <nsd@redhat.com>

        * rs6000-tdep.c: Changes throughout for multi-arch 64-bit
        support.  Incorporate most of tm-rs6000.h.
        (find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
        (rs6000_set_host_arch_hook): Declare.
        (read_memory_addr): Define.
        (pop_frame): Rename to rs6000_pop_frame.
        (rs6000_pop_frame, rs6000_fix_call_dummy, rs6000_push_arguments,
        rs6000_frame_saved_pc, rs6000_frame_chain): Remove non-generic
        dummy frame handling.
        (branch_dest, rs6000_pop_frame, rs6000_skip_trampoline_code,
        rs6000_frame_saved_pc, frame_get_saved_regs,
        frame_initial_stack_address, rs6000_frame_chain,
        rs6000_convert_from_func_ptr_addr): Call read_memory_addr instead
        of read_memory_integer.
        (branch_dest, rs6000_pop_frame, rs6000_push_arguments,
        rs6000_skip_trampoline_code, rs6000_frame_saved_pc,
        frame_get_saved_regs, frame_initial_stack_address,
        rs6000_frame_chain): Replace 4 with TDEP->wordsize.
        (skip_prologue): Recognize some 64-bit stack adjustments.
        (push_dummy_frame, pop_dummy_frame, set_processor,
        show_processor): Delete.
        (frame_get_saved_regs): Manipulate saved register addresses using
        CORE_ADDR instead of int.
        (rs6000_create_inferior): New function.
        (register_names_*[]): Change to struct reg registers_*[].
        (variants[]): Assimilate into multi-arch approach.
        (register_names_*[], variants[]): Refer to pre-PowerPC
        architectures as POWER instead of RS6000.
        * rs6000-nat.c: Ubiquitous changes for 64-bit support.
        (vmap_secs, xcoff_relocate_symtab): Cast addresses
        to unsigned long to avoid sign-extension errors.
        (set_host_arch): New function.
        (xcoff_relocate_symtab): Try disabling usleep(36000) workaround.
        (rs6000_core_fns): Use new bfd_target_xcoff_flavour.
        (_initialize_core_rs6000): Initialize rs6000_set_host_arch_hook.
        * symfile.c (find_sym_fns): Remove special xcoff kludge.
        * xcoffread.c (secnum_to_bfd_section): Initialize args.objfile.
        (process_linenos): Query line struct size from coff
        backend instead of using compile-time constant.
        (enter_line_range): Likewise.
        (read_xcoff_symtab): Pass "XCOFF64" instead of "XCOFF" to
        record_debugformat() if appropriate.
        (process_xcoff_symbol): Access symbol addresses using
        SYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE.
        (read_symbol_lineno): Retrieve XCOFF64 symbol names from strtbl.
        (scan_xcoff_symtab): Likewise.  Query syment struct size from
        coff backend instead of using compile-time constant.
        (xcoff_sym_fns): Set flavour to bfd_target_xcoff_flavour.
        * Makefile.in (INTERNAL_LDFLAGS): Add $(MH_LDFLAGS) to list of flags
        that this Makefile variable get set to.  (From Kevin Buettner.)
        * config/powerpc/aix.mh (MH_LDFLAGS): Add linker flags so that
        the TOC doesn't overflow.  (From Kevin Buettner.)
        * config/powerpc/tm-ppc-aix.h: Move config decisions to
        multi-arched rs6000-tdep.c.
        * config/rs6000/tm-rs6000.h: Likewise.
        (GDB_MULTI_ARCH): Define.
        (skip_trampoline_code): Rename to rs6000_skip_trampoline_code.
        (is_magic_function_pointer): Replace with
        rs6000_convert_from_func_ptr_addr.
        (TARGET_CREATE_INFERIOR_HOOK): Define.
        (find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
        (rs6000_set_host_arch_hook): Declare.
        * config/rs6000/nm-rs6000.h (CHILD_XFER_MEMORY): Define.

2000-06-15  Kevin Buettner  <kevinb@redhat.com>

        * v850ice.c: Eliminate use of PARAMS from this file.

2000-06-15  Michael Snyder  <msnyder@cygnus.com>

        * valops.c (value_cast): Break up long lines.
        * utils.c: Fix comment typo.

2000-06-14  Jim Blandy  <jimb@redhat.com>

        * dwarf2read.c (dump_die): Use the proper printf format for
        printing DW_UNSND values; they're longs now.

        * dwarf2read.c (dump_die): We can read DW_FORM_data8 now, on
        at least some platforms, so print it out too.

2000-06-14  James E. Wilson  <wilson@bletchleypark.cygnus.com>

        * dwarf2read.c (struct attribute): Change unsnd and snd field types
        to long.
        (read_8_bytes): Change return type to long.
        (read_unsigned_leb128): Change return type to long.  Change type of
        local result to long.  Cast argument of left shift to long.
        (read_signed_leb128): Likewise.

2000-06-14  Pierre Muller  <muller@ics.u-strasbg.fr>

        Add support for Pascal language. Part 1: new files.
        * p-exp.y, p-lang.c, p-lang.h, p-typeprint.c, p-valprint.c: New files.

2000-06-13  Kevin Buettner  <kevinb@redhat.com>

        * ser-ocd.c, symtab.c: Eliminate use of PARAMS from these files.

Tue Jun 13 09:21:23 2000  Jeffrey A Law  (law@cygnus.com)

        * configure.host (hppa*64*): Renamed from hppa2.0w per
        gcc/binutils changes.
        * configure.tgt: Similarly.

2000-06-12  Bill Nottingham <notting@redhat.com>

        Patch applied by Kevin Buettner <kevinb@redhat.com>:

        * ia64-linux-nat.c, gdbserver/low-linux.c (u_offsets):  PT_CR_IFS
        is deprecated.  Use PT_CFM instead.

2000-06-12  Michael Snyder  <msnyder@cygnus.com>

        * breakpoint.c (breakpoint_thread_match): Fix comment.

2000-06-12  Fernando Nasser  <fnasser@cygnus.com>

        * valops.c (value_assign): Adjust the length to take into
        consideration that we are not starting from the beginning.

2000-06-12  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * symfile.c (add_symbol_file_command): Properly reformat "else if"
        code.
        * coffread.c (coff_symtab_read): Ditto.
        
Mon Jun 12 15:24:04 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (SER_HARDWIRE): Set using autoconf.
        * configure.in (SER_HARDWIRE): Define, add ser-tcp.o.
        * configure: Re-generate.

        * config/i386/go32.mh (SER_HARDWIRE): Delete.  Handled by
        configure.in.
        * config/sparc/sun4sol2.mh, config/sparc/sun4os4.mh,
        config/sparc/sparclynx.mh, config/sparc/nbsdelf.mh,
        config/sparc/nbsd.mh, config/sparc/linux.mh,
        config/rs6000/rs6000lynx.mh, config/powerpc/solaris.mh,
        config/powerpc/nbsd.mh, config/powerpc/linux.mh,
        config/powerpc/cygwin.mh, config/pa/hpux11w.mh,
        config/pa/hpux11.mh, config/pa/hpux1020.mh, config/pa/hppaosf.mh,
        config/pa/hppahpux.mh, config/pa/hppabsd.mh, config/ns32k/nbsd.mh,
        config/mips/irix5.mh, config/mips/irix4.mh, config/m68k/nbsd.mh,
        config/m68k/m68klynx.mh, config/m68k/linux.mh,
        config/i386/nbsdelf.mh, config/i386/nbsd.mh, config/i386/linux.mh,
        config/i386/i386sco5.mh, config/i386/i386lynx.mh,
        config/i386/i386dgux.mh, config/i386/fbsd.mh,
        config/i386/cygwin.mh, config/arm/linux.mh, config/alpha/fbsd.mh,
        config/alpha/alpha-osf3.mh, config/alpha/alpha-linux.mh: Remove
        ser-tcp.o from XDEPFILES.
        * config/ia64/linux.mh: Ditto.

        * TODO: Update.

Mon Jun 12 14:26:02 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (GDB_TARGET_IS_MIPS64): Define.
        (struct gdbarch_tdep): Add gdb_target_is_mips64.
        (mips_addr_bits_remove): Update.
        (mips_gdbarch_init): Initialize.

        * config/mips/tm-mips64.h (GDB_TARGET_IS_MIPS64,
        GDB_TARGET_IS_MIPS64): Delete.

Mon Jun 12 12:17:20 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c: Include "symcat.h".
        (mips_dump_tdep): Print all known but not yet multi-arched values.

2000-06-12  Mark Kettenis  <kettenis@gnu.org>

        * config/i386/tm-i386.h: Add forward declaration of `struct value'.
        (FIX_CALL_DUMMY): Redefined to call i386_fix_call_dummy.
        (i386_fix_call_dummy): Add prototype.
        * i386-tdep.c (i386_fix_call_dummy): New function based on the
        code from the old FIX_CALL_DUMMY macro.

2000-06-12  Kevin Buettner  <kevinb@redhat.com>

        * procfs.c, remote.c: Eliminate use of PARAMS from these files.

Mon Jun 12 10:21:24 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh (gdbarch_dump): When non multi-arch skip macros that
        return void.

Sun Jun 11 12:06:21 2000  Christopher Faylor <cgf@cygnus.com>

        * exec.c (exec_file_attach): Add .exe extension when __CYGWIN__.

Sat Jun 10 22:31:46 2000  Christopher Faylor <cgf@cygnus.com>

        * win32-nat.c (safe_symbol_file_add_args): Store old gdb_stderr and
        gdb_stdout here.
        (safe_symbol_file_add_stub): Redirect gdb_stdout as well as stderr.
        (safe_symbol_file_add_cleanup): Restore gdb_stdout.
        (info_dll_command): Use the pager for displaying DLLs since there are
        often quite a few.

Sun Jun 11 11:34:05 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Sat Jun 10 17:54:04 2000 Hans-Peter Nilsson <hp@axis.com>:
        * configure.in (targ_archs): Clear out secondary components.
        * configure: Regenerate.

Fri Jun  9 15:06:37 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh (struct gdbarch): Add member dump_tdep.
        (struct gdbarch_registration): Ditto.
        (gdbarch_dump): Add ui_file and gdbarch arguments.  Add support
        for external dump functions.  Dump the macro value.  Call target
        dump routine.
        (gdbarch_register): New function.
        (gdbarch_registrary): Replace gdbarch_init_registrary.
        * gdbarch.h, gdbarch.c: Re-generate.
        * arch-utils.c (set_arch): Update.
        
        * mips-tdep.c (mips_dump_tdep): New function. Move dump code here.
        (mips_gdbarch_init): From here.

        * maint.c (maintenance_print_architecture): New function.
        (_initialize_maint_cmds): Add command ``maintenance print
        architecture''.

2000-06-08  Kevin Buettner  <kevinb@redhat.com>

        * command.h, monitor.h: Eliminate use of PARAMS from these
        files.

2000-06-08  Fernando Nasser  <fnasser@cygnus.com>

        * config/i386/tm-embed.h: New file.  Specific for embedded targets
        like i386-elf, i386-coff and i386-aout.
        * config/i386/embed.mt (): Specify tm-embed.h instead of the System V
        header file.

2000-06-08  Fernando Nasser  <fnasser@cygnus.com>

        * MAINTAINERS: Add myself to gdbtk list.

2000-06-08  Kevin Buettner  <kevinb@redhat.com>

        * config/ia64/nm-linux.h (U_REGS_OFFSET): Define.

2000-06-08  Fernando Nasser  <fnasser@cygnus.com>

        * configure.in: Replace misplaced CONFIG_ADD by the correct
        CONFIG_CLEAN.
        * configure, config.in: Regenerate.

2000-06-08  Fernando Nasser  <fnasser@cygnus.com>

        * values.c (value_primitive_field): Copy VALUE_REGNO as well.
        With typed registers we may have the location information in this field,
        in addition to VALUE_ADDRESS (which was already being copied).

Thu Jun  8 15:26:44 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/mips/tm-mips.h (GDB_MULTI_ARCH): Define as 1.
        (CALL_DUMMY, TARGET_BYTE_ORDER_SELECTABLE_P,
        COERCE_FLOAT_TO_DOUBLE): Delete.
        * config/mips/tm-vr5000el.h, config/mips/tm-vr5000.h,
        config/mips/tm-vr4xxxel.h, config/mips/tm-vr4xxx.h,
        config/mips/tm-vr4100.h, config/mips/tm-tx39l.h
        config/mips/tm-tx39.h, config/mips/tm-irix5.h: Delete
        GDB_MULTI_ARCH.

        * config/mips/tm-mips64.h (TARGET_LONG_BIT, TARGET_LONG_LONG_BIT,
        TARGET_PTR_BIT): Delete definitions.
        * config/mips/tm-vr5000el.h, config/mips/tm-vr5000.h,
        config/mips/tm-tx39l.h, config/mips/tm-vr4100.h,
        config/mips/tm-tx39.h: Delete definition of MIPS_EABI.
        * mips-tdep.c (mips_gdbarch_init): Use the ISA to determine the
        ABI.  If all else fails, assume O32.

        * TODO, NEWS: Update.  Mention MIPS is multi-arch.

Thu Jun  8 14:23:12 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/mips/tm-vr4xxxel.h, config/mips/tm-vr4xxx.h,
        config/mips/tm-vr4100.h, config/mips/tm-tx39l.h,
        config/mips/tm-tx39.h: Delete definition of
        MIPS_DEFAULT_FPU_TYPE. Enable multi-arch.
        * mips-tdep.c: (mips_gdbarch_init): The bfd_mach_mips3900 has no
        FPU.  bfd_mach_mips4650 FPU is single precision.

        * config/mips/tm-mips.h (MIPS_FPU_SINGLE_REGSIZE): 
        (MIPS_FPU_DOUBLE_REGSIZE): Move from here.
        * mips-tdep.c: To here.  Change to an enum.

Wed Jun  7 18:27:51 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (DEFAULT_BFD_ARCH, DEFAULT_BFD_VEC): Use config.bfd
        to determine the default architecture / target.
        * acconfig (DEFAULT_BFD_ARCH, DEFAULT_BFD_VEC): Add.
        * configure, config.in: Regenerate.
        
        * arch-utils.c (set_endian): Better separate multi-arch and non-
        multi-arch cases.
        (set_endian_from_file): Call internal_error when multi-arch.
        (initialize_current_architecture): Rewrite logic selecting a byte
        order.  Use DEFAULT_BFD_ARCH DEFAULT_BFD_VEC.
        (version.h): Include.

        * config/mips/tm-mips.h, config/mips/tm-bigmips64.h,
        config/mips/tm-bigmips.h: Delete definition of
        TARGET_BYTE_ORDER_DEFAULT.

Thu Jun  8 11:41:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * infrun.c (follow_inferior_fork): Bad merge from below.  Compare
        strings using follow_fork_mode_ask and not "ask".

Wed Jun  7 15:13:04 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * command.h (add_set_enum_cmd): Make ``enumlist'' and ``var''
        constant char pointers.
        (complete_on_enum): Change ``enumlist'' to a constant char
        pointer.
        (struct cmd_list_element): Ditto for member ``enums''.
        * command.c (complete_on_enum, add_set_enum_cmd,
        do_setshow_command): Update.

        * infrun.c (follow_fork_mode_ask, follow_fork_mode_parent,
        follow_fork_mode_both, follow_fork_mode_child): New.  Use to
        construct the follow_fork_mode_kind_names.
        (set_follow_fork_mode_command): Delete function.
        (_initialize_infrun): Update.
        (follow_inferior_fork): Do not strdup follow_fork_mode_string.
        Use follow_fork_mode_* variables directly instead.  Call
        internal_error instead of error when unimplemented "ask" mode.

        * infrun.c (scheduler_enums, scheduler_mode, schedlock_off,
        schedlock_on, schedlock_step): Update.
        * serial.c (serial_logbase, logbase_hex, logbase_octal,
        logbase_ascii, logbase_enums): Update.
        * remote.c (packet_support_enums, packet_support_auto,
        packet_enable, packet_disable, struct packet_config): Update.
        * arch-utils.c (initialize_current_architecture,
        set_architecture_string): Update.
        (endian_big, endian_little, endian_auto, endian_enum,
        set_endian_string): Update.
        * i386-tdep.c (valid_flavors, att_flavor, intel_flavor,
        disassembly_flavor): Update.
        * mips-tdep.c (size_enums, size_64, size_32, size_auto,
        mips_stack_argsize_string, mips_saved_regsize_string): Update.
        * arm-tdep.c (disassembly_flavor, valid_flavors): Update.
        (_initialize_arm_tdep): Ditto.

        * TODO: Update.

Mon Jun  5 18:44:14 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * thread.c (make_cleanup_restore_current_thread,
        do_restore_current_thread_cleanup): New functions.
        (thread_apply_all_command, thread_apply_command): Use. Call
        do_cleanups when finished.

        * defs.h (make_cleanup_func): Delete typedef.
        * TODO: Update.

Wed Jun  7 11:34:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * arch-utils.c (target_byte_order, target_byte_order_auto,
        show_endian, set_endian, set_endian_big, set_endian_little,
        set_endian_auto, set_endian_from_file, enum set_arch,
        target_architecture_auto, set_architecture_string,
        target_architecture_hook, target_architecture, arch_ok, set_arch,
        set_architecture_from_arch_mach, set_architecture_from_file,
        show_architecture, set_architecture, info_architecture,
        set_gdbarch_from_file, initialize_current_architecture): Copy from
        gdbarch.c.  Rewrite ``set architecture'' and ``set endian''
        commands to use enums.
        (_initialize_gdbarch_utils): Fix name.
        * arch-utils.h (set_architecture_from_arch_mach,
        target_architecture_hook): Copy from gdbarch.h.
        * gdbarch.sh: Update.
        * gdbarch.h, gdbarch.c: Re-generate.

        * TODO: Update.

        * v850-tdep.c, sh3-rom.c, sh-tdep.c, i386-tdep.c: Include
        "arch-utils.h".
        * Makefile.in (v850-tdep.o): Specify dependencies.
        (i386-tdep.o, sh3-rom.o, sh-tdep.o): Add arch-utils.h to
        dependency list.

2000-06-06  Michael Snyder  <msnyder@cygnus.com>

        * configure.in: Enable autoconf to find curses.h on Solaris 2.8.
        * configure: Regenerate.

Tue Jun  6 21:14:47 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * command.c (do_setshow_command): Accept an enum option immediatly
        when it is an exact match.

Tue Jun  6 16:46:37 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/mips/tm-vr5000el.h, config/mips/tm-vr5000.h,
        config/mips/tm-vr4xxxel.h, config/mips/tm-vr4xxx.h,
        config/mips/tm-vr4300el.h, config/mips/tm-vr4100.h,
        config/mips/tm-vr4300.h, config/mips/tm-tx39l.h,
        config/mips/tm-tx39.h, config/mips/tm-embedl64.h,
        config/mips/tm-embedl.h, config/mips/tm-embed64.h,
        config/mips/tm-embed.h: Delete TARGET_BYTE_ORDER_SELECTABLE_P.

        * tm-mips.h (TARGET_BYTE_ORDER_SELECTABLE_P): Define as 1.
        
Tue Jun  6 16:21:14 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh (generic_register_convertible_not,
        frame_num_args_unknown): Move from here.
        * arch-utils.c (generic_register_convertible_not,
        frame_num_args_unknown): To here.
        * arch-utils.h (frame_num_args_unknown): Add declaration.
        * gdbarch.h, gdbarch.c: Re-generate.

Tue Jun  6 15:07:08 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote-mips.c (mips_open): Select the default monitor prompt
        based on the target ISA.

        * config/mips/tm-vr4100.h (TARGET_MONITOR_PROMPT),
        config/mips/tm-vr4300el.h (TARGET_MONITOR_PROMPT),
        config/mips/tm-vr4300.h (TARGET_MONITOR_PROMPT),
        config/mips/tm-vr4xxx.h (TARGET_MONITOR_PROMPT),
        config/mips/tm-vr4xxxel.h (TARGET_MONITOR_PROMPT),
        config/mips/tm-vr5000el.h (TARGET_MONITOR_PROMPT),
        config/mips/tm-vr5000.h (TARGET_MONITOR_PROMPT),
        config/mips/tm-mips.h (TARGET_MONITOR_PROMPT): Delete macro.

2000-06-05  Daniel Berlin  <dan@cgsoftware.com>

        * c-exp.y (yylex): template handling fixes.

2000-06-03  Daniel Berlin  <dan@cgsoftware.com>

        * symtab.h (VTBL_PREFIX_P): Add newer g++ vtbl prefix to prefix
        list.

        * symtab.c (lookup_partial_symbol): Change to stop forcing linear
        searches on C++ when we fail the binary search, by doing the
        binary search right.

2000-05-30  Daniel Berlin  <dan@cgsoftware.com>

        * buildsym.c (hashname): Change to use hash function from bcache.c/.h

        * bcache.c (hash): Change to newer hash function.

        * bcache.h (hash): Prototype for hash function

        * dwarf2read.c (TYPE_HASH_SIZE): New define for controlling size
        of type hash.
        (dwarf2_cached_types): New variable that is the cached types.
        (tag_type_to_type): Do the actual caching of types here.

2000-06-05  Mark Kettenis  <kettenis@gnu.org>

        * acconfig.h, configure.in, i386bsd.c (HAVE_STRUCT_REG_R_FS):
        Renamed from HAVE_R_FS.
        (HAVE_STRUCT_REG_GS): Renamed from HAVE_R_GS.
        * configure, config.in: Regenerated.

Sun Jun  4 14:00:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Update.  Mention GNU/Linux/SPARC problems.

Wed May 31 21:41:37 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Change buf
        to a void pointer.  Update initial values.
        * gdbarch.h, gdbarch.c: Re-generate.
        
        * findvar.c (address_to_signed_pointer,
        signed_pointer_to_address): New functions.
        * inferior.h (signed_pointer_to_address,
        signed_address_to_pointer): Declare.

        * inferior.h, findvar.c (unsigned_pointer_to_address,
        address_to_unsigned_pointer): Rename generic_address_to_pointer
        and generic_pointer_to_address.  Update signatures to match
        gdbarch changes.

        * config/mips/tm-mips.h (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER):
        Define. MIPS has signed pointers.

        * defs.h, utils.c (host_pointer_to_address,
        address_to_host_pointer): New functions.
        * irix5-nat.c (next_link_map_member, first_link_map_member),
        procfs.c (proc_set_watchpoint, proc_iterate_over_mappings): Use.

        * irix5-nat.c (solib_map_sections, symbol_add_stub): Change
        function signature to match catch_errors_ftype.

        * TODO: Update. GDB builds using the IRIX native compiler.
        
Sat Jun  3 20:43:59 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * defs.h (strsignal, safe_strsignal): Delete declarations.
        * utils.c (safe_strsignal): Delete.
        * corelow.c (core_open): Replace save_strsignal with
        target_signal_to_string + target_signal_from_host.
        * TODO: Document problems with target_signal_from_host.

2000-06-03  Kevin Buettner  <kevinb@redhat.com>

        * annotate.c, annotate.h, breakpoint.c, command.c, command.h,
        config/rs6000/tm-rs6000.h, corefile.c, d10v-tdep.c,
        d30v-tdep.c, dbxread.c, dcache.c, dcache.h, dsrec.c,
        dve3900-rom.c, exec.c, fork-child.c, gdbcore.h, hpux-thread.c,
        language.h, linux-thread.c, mdebugread.c, monitor.h, ocd.c,
        procfs.c, ptx4-nat.c, remote-sim.c, remote-utils.h, remote.c,
        rs6000-tdep.c, ser-ocd.c, sol-thread.c, sparcl-tdep.c,
        stabsread.h, stack.c, symfile.c, symfile.h, symtab.h,
        target.c, target.h, top.c, tracepoint.c, tracepoint.h,
        tui/tui.h, tui/tuiIO.c, utils.c, v850ice.c, varobj.c,
        win32-nat.c, wince.c, xcoffsolib.c, xcoffsolib.h: Eliminate
        PARAMS from function pointer declarations. 

2000-06-03  Christopher Faylor  <cgf@cygnus.com>

        * win32-nat.c (safe_symbol_file_add_cleanup): Ensure that gdb_stderr is
        flushed before deleting and restoring it.
        (safe_symbol_file_add): Ensure that gdb_stderr is flushed before
        reassigning it.
        (handle_load_dll): Split into two functions so that WFI can handle
        shared library events.
        (child_solib_loaded_library_pathname): New function.
        (child_clear_solibs): New function.  Clears shared library list.
        (child_solib_add): New function.  Adds shared library symbols.
        (dll_symbol_command): New function.  Handles "dll-symbol" command.
        (info_dll_command): New function.  Handles info
        "sharedlibrary" command.
        (handle_exceptions): Eliminate 'ignore_trap' argument.
        (get_child_debug_event): Eliminate two arguments.  Return "pid" when
        appropriate.  Break out on most events to allow WFI to handle stuff.
        (child_wait): Accomodate get_child_debug_event changes.
        (child_attach): Clear thread list and list of loaded dlls.
        (child_create_inferior): Clear list of loaded dlls.  Use
        wait_for_inferior in a loop to look for first "trap".
        (child_resume): Avoid accessing a possibly-freed thread pointer.
        (_initialize_inftarg): Add "dll-symbols", "sharedlibrary", and "info
        sharedlibrary" commands.
        * config/i386/tm-cygwin.h: Add some shared library (aka DLL) hooks.

2000-06-02  Christopher Faylor  <cgf@cygnus.com>

        * win32-nat.c: Fix up gcc warnings throughout.
        (handle_load_dll): Change DLL name to lower case.
        (handle_exception): Add a second argument indicating whether a
        breakpoint should be ignored.  Return a 0 if the breakpoint was
        ignored.
        (get_child_debug_event): Pass argument to handle_exception to control
        whether a breakpoint should be ignored.
        (child_create_inferior): Use modern cygwin API.  Explicitly clear
        last_sig.  Pass FIRST_EXCEPTION to get_child_debug_event for detection
        of first breakpoint.

2000-06-02  Christopher Faylor  <cgf@cygnus.com>

        * configure.in: Detect correct versions of dlltool and windres when
        cross-compiling.
        * configure: Regenerate.

2000-06-02  J.T. Conklin  <jtc@redback.com>

        * configure.tgt: Add pattern for i[3456]86-*-netbsdelf*.
        * config/i386/nbsdelf.mt: New file.
        * config/i386/tm-nbsdelf.h: New file.
        
        * config/i386/tm-nbsd.h: change include of tm-nbsd.h to 
        the more explicit config/tm-nbsd.h.

2000-06-02  Mark Kettenis  <kettenis@gnu.org>

        * alphabsd-nat.c (supply_fpregset): Substract FP0_REGNUM from
        register number when used as index into fpr_regs array.

Tue May 30 13:31:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * defs.h (TARGET_FLOAT_FORMAT, TARGET_DOUBLE_FORMAT,
        TARGET_LONG_DOUBLE_FORMAT): Delete.

        * gdbarch.sh: Add support for parameterized expressions.
        (TARGET_FLOAT_FORMAT, TARGET_DOUBLE_FORMAT,
        TARGET_LONG_DOUBLE_FORMAT): Add.  Include "floatformat.h".
        * gdbarch.h, gdbarch.c: Regenerate.
        
        * arch-utils.c (default_single_format, default_double_format,
        default_long_double_format): New functions. Include
        "floatformat.h"
        * arch-utils.h: Declare.
        
        * d10v-tdep.c (d10v_gdbarch_init): Set floating point format.
        Note that long double is 64 bit, the rest are 32 bit.  Include
        "floatformat.h".

2000-06-02  Mark Kettenis  <kettenis@gnu.org>

        * config/alpha/nm-fbsd.h (CANNOT_STEP_BREAKPOINT): Define.

2000-06-01  Michael Snyder  <msnyder@cygnus.com>

        * sol-thread.c (rw_common): Circumstances (eg. a bug in Sun's 
        thread_db library) may cause this function to be called with an
        illegal address, in which case procfs_to_xfer_memory will 
        return zero.  Return an error code instead of looping forever.

Thu Jun  1 20:05:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: More suggestions added.

2000-06-01  Klee Dienes  <kdienes@apple.com>

        * MAINTAINERS: Add Klee Dienes and Jim Ingham as maintainers for
        Mac OS X and Objective C components (to be contributed).

2000-05-31  J.T. Conklin  <jtc@redback.com>

        * configure.host: Add patterns for i[3456]86-*-netbsdaout*
        and i[3456]86-*-netbsdelf*.
        * config/i386/nm-nbsdelf.h: New file.
        * config/i386/nbsdelf.mh: New file.

        * config/i386/nm-nbsd.h: change include of nm-nbsd.h to 
        the more explicit config/nm-nbsd.h.
        * config/i386/tm-nbsd.h: change include of tm-i386bsd.h to
        tm-i386.h.
        (SIGTRAMP_START, SIGTRAMP_END, SIGCONTEXT_PC_OFFSET): Define.

2000-06-01  Mark Kettenis  <kettenis@gnu.org>

        * NEWS: Mention FreeBSD/Alpha and FreeBSD/i386 3.x and up as new
        native configurations.

        * i386bsd-nat.c: Include "gregset.h".
        (CANNOT_STORE_REGISTER): Define to cannot_fetch_register instead
        of CANNOT_FETCH_REGISTER, if not already defined.
        (supply_gregset): Call supply_register with NULL as its second
        argument instead of supplying our own zeroed out buffer.
        (fill_gregset): Copy contents of correct registers instead of the
        contents of register REGNO.

2000-05-31  Kevin Buettner  <kevinb@redhat.com>

        * gnu-regex.c (re_match_2_internal): Revert 2000-05-27
        patch which removed use of PARAMS from declaration.  This
        file should not have been touched as it is supposed to track
        the version in glibc.

2000-05-31  Mark Kettenis  <kettenis@gnu.org>

        Add support for FreeBSD/Alpha.
        * configure.host, configure.tgt (alpha*-*-freebsd*): New entry.
        * alphabsd-nat.c, config/alpha/fbsd.mh, config/alpha/fbsd.mt,
        config/alpha/nm-fbsd.h, config/alpha/tm-fbsd.h,
        config/alpha/xm-fbsd.h: New files.

2000-05-31  Pierre Muller  <muller@sourceware.cygnus.com>

        * MAINTAINERS: Add myself to "Write After Approval" list.

Tue May 30 18:48:33 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Re-organize.

Tue May 30 11:22:28 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh: Add field ``postdefault''.  Rename fields
        ``startup'' and ``default'' to ``staticdefault'' and
        ``predefault''.  Fix initialization of valid_p.  Create/compare
        gdbarch.log.

Mon May 29 22:47:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/sparc/nm-sun4sol2.h (GDB_GREGSET_T, GDB_FPREGSET_T):
        Define.
        * config/sparc/xm-sun4sol2.h: (GDB_GREGSET_TYPE,
        GDB_FPREGSET_TYPE): Delete.

Mon May 29 15:41:10 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * symtab.h (make_cleanup_free_search_symbols): Add declaration.
        * symtab.c (make_cleanup_free_search_symbols,
        do_free_search_symbols_cleanup): New functions.
        (search_symbols, symtab_symbol_info, rbreak_command): Update.
        (search_symbols): Pass ``sr'', and not its address, to
        make_cleanup_free_search_symbols.

2000-05-28  Kevin Buettner  <kevinb@redhat.com>

        * config/nm-linux.h (GDB_GREGSET_T, GDB_FPREGSET_T): Fix typos.

2000-05-27  Kevin Buettner  <kevinb@redhat.com>

        * abug-rom.c, alpha-nat.c, alpha-tdep.c, annotate.c,
        annotate.h, arc-tdep.c, ax-gdb.c, ax-gdb.h, ax-general.c,
        ax.h, breakpoint.c, breakpoint.h, c-exp.y, c-lang.c, c-lang.h,
        call-cmds.h, ch-exp.c, ch-lang.c, ch-lang.h, cli-out.c,
        coff-solib.h, coffread.c, command.c, command.h, complaints.c,
        complaints.h, config/a29k/tm-a29k.h, config/a29k/tm-vx29k.h,
        config/alpha/nm-linux.h, config/alpha/nm-osf.h,
        config/alpha/nm-osf2.h, config/alpha/tm-alpha.h,
        config/alpha/tm-alphalinux.h, config/arc/tm-arc.h,
        config/arm/tm-embed.h, config/d30v/tm-d30v.h,
        config/fr30/tm-fr30.h, config/h8300/tm-h8300.h,
        config/h8500/tm-h8500.h, config/i386/nm-i386bsd.h,
        config/i386/nm-i386sco.h, config/i386/nm-i386sol2.h,
        config/i386/nm-i386v.h, config/i386/nm-linux.h,
        config/i386/nm-nbsd.h, config/i386/nm-ptx4.h,
        config/i386/nm-symmetry.h, config/i386/tm-cygwin.h,
        config/i386/tm-i386.h, config/i386/tm-i386nw.h,
        config/i386/tm-i386sol2.h, config/i386/tm-i386v.h,
        config/i386/tm-i386v4.h, config/i386/tm-nbsd.h,
        config/i386/tm-ptx.h, config/i386/tm-sun386.h,
        config/i960/tm-mon960.h, config/i960/tm-nindy960.h,
        config/m32r/tm-m32r.h, config/m68k/nm-dpx2.h,
        config/m68k/nm-linux.h, config/m68k/tm-cisco.h,
        config/m68k/tm-delta68.h, config/m68k/tm-es1800.h,
        config/m68k/tm-isi.h, config/m68k/tm-linux.h,
        config/m68k/tm-m68k.h, config/m68k/tm-m68kv4.h,
        config/m68k/tm-news.h, config/m68k/tm-sun3.h,
        config/m68k/tm-vx68.h, config/m68k/xm-hp300bsd.h,
        config/m88k/tm-m88k.h, config/mcore/tm-mcore.h,
        config/mips/nm-irix3.h, config/mips/nm-irix4.h,
        config/mips/nm-irix5.h, config/mips/nm-mips.h,
        config/mips/tm-embed.h, config/mips/tm-mips.h,
        config/mn10200/tm-mn10200.h, config/mn10300/tm-mn10300.h,
        config/nm-linux.h, config/nm-lynx.h, config/ns32k/nm-nbsd.h,
        config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h,
        config/pa/nm-hppah.h, config/pa/tm-hppa.h,
        config/pa/tm-hppa64.h, config/pa/xm-hppah.h,
        config/powerpc/nm-linux.h, config/powerpc/tm-linux.h,
        config/powerpc/tm-ppc-eabi.h, config/powerpc/tm-solaris.h,
        config/powerpc/xm-aix.h, config/rs6000/nm-rs6000.h,
        config/rs6000/tm-rs6000.h, config/rs6000/xm-rs6000.h,
        config/sh/tm-sh.h, config/sparc/nm-linux.h,
        config/sparc/nm-sun4os4.h, config/sparc/nm-sun4sol2.h,
        config/sparc/tm-sp64.h, config/sparc/tm-sp64sim.h,
        config/sparc/tm-sparc.h, config/sparc/tm-sparclet.h,
        config/sparc/tm-spc-em.h, config/sparc/tm-sun4os4.h,
        config/sparc/tm-sun4sol2.h, config/tic80/tm-tic80.h,
        config/tm-sysv4.h, config/v850/tm-v850.h, config/vax/tm-vax.h,
        config/w65/tm-w65.h, config/xm-aix4.h, config/z8k/tm-z8k.h,
        copying.c, core-aout.c, core-regset.c, core-sol2.c,
        corefile.c, corelow.c, cp-valprint.c, cpu32bug-rom.c,
        d10v-tdep.c, d30v-tdep.c, dbug-rom.c, dbxread.c, dcache.c,
        dcache.h, demangle.c, dink32-rom.c, dsrec.c, dstread.c,
        dve3900-rom.c, dwarf2read.c, dwarfread.c, elfread.c,
        environ.h, eval.c, exec.c, expprint.c, expression.h, f-exp.y,
        f-lang.c, f-lang.h, f-valprint.c, findvar.c, fr30-tdep.c,
        frame.h, gdb_string.h, gdbcmd.h, gdbcore.h,
        gdbserver/server.h, gdbtypes.c, gdbtypes.h, gnu-regex.c,
        h8300-tdep.c, hp-psymtab-read.c, hp-symtab-read.c,
        hp300ux-nat.c, hppa-tdep.c, hppah-nat.c, hpread.c, hpread.h,
        hpux-thread.c, i386-tdep.c, i386aix-nat.c, i386mach-nat.c,
        i386v-nat.c, i386v4-nat.c, i387-tdep.c, i960-tdep.c, infcmd.c,
        inferior.h, inflow.c, infptrace.c, inftarg.c, irix4-nat.c,
        irix5-nat.c, jv-exp.y, jv-lang.c, jv-lang.h, language.c,
        language.h, lynx-nat.c, m2-exp.y, m2-lang.c, m2-lang.h,
        m32r-rom.c, mac-nat.c, main.c, maint.c, mdebugread.c,
        mi/mi-out.c, minsyms.c, mips-nat.c, mips-tdep.c, mipsread.c,
        mn10300-tdep.c, mon960-rom.c, monitor.c, monitor.h, nlmread.c,
        objfiles.c, objfiles.h, ocd.c, ocd.h, op50-rom.c, os9kread.c,
        osfsolib.c, pa64solib.c, pa64solib.h, parse.c, parser-defs.h,
        ppc-bdm.c, printcmd.c, procfs.c, remote-array.c, remote-bug.c,
        remote-e7000.c, remote-es.c, remote-est.c, remote-hms.c,
        remote-mips.c, remote-nindy.c, remote-nrom.c, remote-rdi.c,
        remote-rdp.c, remote-sds.c, remote-sim.c, remote-udi.c,
        remote-utils.c, remote-utils.h, remote-vx.c, remote.c,
        rom68k-rom.c, rs6000-nat.c, rs6000-tdep.c, scm-exp.c,
        scm-lang.c, scm-lang.h, ser-e7kpc.c, ser-mac.c, sh3-rom.c,
        sol-thread.c, solib.c, solib.h, somread.c, somsolib.c,
        somsolib.h, source.c, sparc-nat.c, sparcl-tdep.c,
        sparclet-rom.c, srec.h, stabsread.c, stabsread.h, stack.c,
        sun3-nat.c, symfile.c, symfile.h, symmisc.c, symtab.c,
        symtab.h, target.c, target.h, terminal.h, thread.c, top.c,
        top.h, tracepoint.c, tracepoint.h, tui/tui-file.c, tui/tui.c,
        tui/tui.h, tui/tuiCommand.h, tui/tuiData.c, tui/tuiData.h,
        tui/tuiDataWin.h, tui/tuiDisassem.c, tui/tuiDisassem.h,
        tui/tuiGeneralWin.c, tui/tuiGeneralWin.h, tui/tuiIO.c,
        tui/tuiIO.h, tui/tuiLayout.c, tui/tuiLayout.h, tui/tuiRegs.c,
        tui/tuiRegs.h, tui/tuiSource.c, tui/tuiSource.h,
        tui/tuiSourceWin.h, tui/tuiStack.c, tui/tuiStack.h,
        tui/tuiWin.c, tui/tuiWin.h, typeprint.c, ui-file.c, ui-out.h,
        ultra3-nat.c, utils.c, v850-tdep.c, v850ice.c, valarith.c,
        valops.c, valprint.c, value.h, values.c, varobj.c, w89k-rom.c,
        win32-nat.c, wince.c, wrapper.c, wrapper.h, xcoffread.c,
        xcoffsolib.c, xmodem.h, z8k-tdep.c: Remove PARAMS from function
        declarations.

2000-05-26  Michael Snyder  <msnyder@cygnus.com>

        * gregset.h: New file.  Typedefs for gdb_gregset_t and 
        gdb_fpregset_t, prototypes for supply_gregset and friends.
        * procfs.c: Include gregset.h.  Delete local prototypes for
        supply_gregset etc., and local typedef gdb_gregset_t etc.
        * sol-thread.c: Include gregset.h, delete local prototypes, 
        add appropriate casts to gdb_gregset_t.
        * uw-thread.c, lin-thread.c, core-sol2.c, core-regset.c, 
        sparc-tdep.c, ptx4-nat.c, ppc-linux-nat.c, mipsv4-nat.c, 
        m88k-nat.c, m68klinux-nat.c, m68k-tdep.c, irix5-nat.c, 
        irix4-nat.c, ia64-linux-nat.c, i386v4-nat.c, cxux-nat.c,
        arm-linux-nat.c, alpha-nat.c: Include gregset.h.
        * config/nm-linux.h: Define GDB_GREGSET_T, GDB_FPREGET_T.
        * config/sparc/nm-sun4sol2.h: Ditto.
        * config/sparc/xm-sun4sol2.h: (GDB_GREGSET_TYPE,
        GDB_FPREGSET_TYPE): Delete (replaced by GDB_GREGSET_T etc.)

Thu May 25 16:56:05 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (AC_CHECK_HEADERS): Check for ncurses.h.
        * config.in, configure: Re-generate.
        
2000-05-25  Scott Bambrough <scottb@netwinder.org>

        * arm-linux-tdep.c (find_minsym_and_objfile): New.
        (skip_hurd_resolver): New.
        (arm_linux_skip_solib_resolver): New.
        (arm_skip_solib_resolver): Removed.

        * config/arm/tm-linux.h (SKIP_SOLIB_RESOLVER): Changed to use 
        arm_linux_skip_solib_resolver.

2000-05-25  Mark Kettenis  <kettenis@gnu.org>

        * acconfig.h (HAVE_R_FS, HAVE_R_GS): Add.
        * configure.in: Add checks for r_fs and r_gs members of
        `struct reg'.
        * config.in, configure: Regenerated.

2000-05-25  Eli Zaretskii  <eliz@is.elta.co.il>

        * ser-go32.c: Remove PARAMS.

Thu May 25 15:22:12 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (AC_CHECK_HEADERS): Check for <dirent.h>,
        <sys/ndir.h>, <sys/dir.h> and <ndir.h>.
        * config.in, configure: Re-generate.    
        * gdb_dirent.h: New file

        * infptrace.c: Include "gdb_dirent.h" instead of <sys/dir.h>.
        * core-aout.c: Ditto.
        * procfs.c: Include "gdb_dirent.h" instead of <dirent.h>.

Thu May 25 14:43:30 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * config.in: Regenerate.

Thu May 25 13:49:17 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Fri 19 May 2000 Eli Zaretskii <eliz@is.elta.co.il>: *
        config/djgpp/fnchange.lst: Fix bfd/coff-tic54x.c, bfd/coff-tc54x.c
        and gdb/testsuite/gdb.mi/mi-var-cmd.exp.

Thu May 25 11:09:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (AC_OUTPUT): Do not generate tui/Makefile.
        (enable-tui): Convert Makefile configury to use the same mechanism
        as MI.

        * Makefile.in (BUILD_TUI, TUI_LIBRARY, TUI_DIR, TUI_SRC,
        TUI_CFLAGS): Delete
        (all-tui): Delete target.
        (tuiWin.o, tuiStack.o, tuiSourceWin.o, tuiSource.o, tuiRegs.o,
        tuiLayout.o, tuiIO.o, tuiGeneralWin.o, tuiDisassem.o,
        tuiDataWin.o, tuiData.o, tuiCommand.o, tui.o): New targets.
        (SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_TUI_DEPS,
        SUBDIR_TUI_INITS, SUBDIR_TUI_LDFLAGS, SUBDIR_TUI_CFLAGS,
        SUBDIR_TUI_ALL, SUBDIR_TUI_CLEAN, SUBDIR_TUI_INSTALL,
        SUBDIR_TUI_UNINSTALL): Define.

        * TODO: Update.

Thu May 25 11:02:24 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Update.  Mark Kettenis fixed FreeBSD >2.2 support.
        * MAINTAINERS: Update Jim Ingham's address.

2000-05-25  Mark Kettenis  <kettenis@gnu.org>

        Add support for FreeBSD/i386 ELF.
        * i386bsd-nat.c: New file.
        * config/i386/tm-fbsd.h (HAVE_I387_REGS): Define.
        Include "i386/tm-i386.h" instead of "i386/tm-i386b.h".
        (NUM_REGS): Remove redefinition.
        (USE_STRUCT_CONVENTION): Define.
        (i386_float_info): Remove prototype.
        (FLOAT_INFO): Remove define.
        (JB_ELEMENT_SIZE): Define to 4.
        (JB_PC): Define to 0.
        (GET_LONGJMP_TARGET): Define.
        (SIGTRAMP_START, SIGTRAMP_END): Define.
        (SIGCONTEXT_PC_OFFSET): Define.
        (IN_SOLIB_CALL_TRAMPOLINE): Only define if !SVR4_SHARED_LIBS
        * config/i386/nm-fbsd.h (PTRACE_ARG3_TYPE): Define to caddr_t.
        (FETCH_INFERIOR_REGISTERS): Define.
        (ATTACH_DETACH): Define.
        (kernel_u_size): Remove PARAMS.
        (register_u_addr): Use CORE_ADDR in prototype where appropriate.
        Remove PARAMS.
        (SVR4_SHARED_LIBS) [FREEBSD_ELF || __ELF__ && !FREEBSD_AOUT]:
        Define.
        [SVR4_SHARED_LIBS]: Include "elf/common.h".
        Only define aliases for struct members from <link.h> if
        !SVR4_SHARED_LIBS.
        * config/i386/xm-fbsd.h: New file.
        * config/i386/fbsd.mt (TDEPFILES): Remove solib.o.
        * config/i386/fbsd.mh (NATDEPFILES): Remove i386b-nat.o.  Add
        core-regset.o i387-nat.o i386bsd-nat.o.

2000-05-24  Michael Snyder  <msnyder@cygnus.com>

        * findvar.c (value_from_register): Factor code, simplify logic.

2000-05-23  J.T. Conklin  <jtc@redback.com>

        * config/i386/nbsd.mt (TDEPFILES): Move solib.o from here...
        * config/i386/nbsd.mh (NATDEPFILES): ...to here.
        * config/m68k/nbsd.mt (TDEPFILES): Move solib.o from here...
        * config/m68k/nbsd.mh (NATDEPFILES): ...to here.
        * config/ns32k/nbsd.mt (TDEPFILES): Move solib.o from here...
        * config/ns32k/nbsd.mh (NATDEPFILES): ...to here.

        * config/powerpc/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o.
        * configure.tgt (powerpc-*-netbsd*): add gdbserver to configdirs.
        * gdbserver/low-nbsd.c (initialize_arch): Define for PPC.
        (fetch_inferior_registers): Likewise.
        (store_inferior_registers): Likewise.

        * gdbserver/low-nbsd.c (fetch_inferior_registers): Handle X86 
        floating point registers.
        (store_inferior_registers): Likewise.

2000-05-24  Mark Kettenis  <kettenis@gnu.org>

        * i387-nat.h, i387-nat.c: New files.

Tue May 23 17:21:24 2000  Alexandre Oliva  <aoliva@cygnus.com>

        * config/sparc/nm-linux.h: Include config/nm-linux.h.
        * config/powerpc/nm-linux.h: Likewise.

Tue May 23 13:20:00 1999  Gregory Lielens  <info@fft.be>

        * f-valprint.c : Corrected f_val_print function for TYPE_CODE
        (type) = TYPE_CODE_COMPLEX

Wed May 24 00:38:09 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * utils.c (make_cleanup_close, do_close_cleanup): New functions.
        * defs.h (make_cleanup_close): Add declaration.

Tue May 23 20:47:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (build_warnings): Add -Wuninitialized.
        * configure: Regenerate.

Tue May 23 17:44:18 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Mon May 8 14:49:51 2000 Andrew Cagney <cagney@b1.cygnus.com>
        (gdb 5.0): From Michael Paddon <mmpp@esec.com.au>:
        * configure.in (AC_CHECK_HEADERS): Check for <sys/user.h>.

        * configure: Re-generate.
        * proc-api.c: Only include <sys/user.h> when available.
        (ioctl_table): Check that PIOCGETPR and PIOCGETU are defined.

        * TODO: Update.

2000-05-17  Michael Snyder  <msnyder@cygnus.com>

        * config/sparc/tm-sun4sol2.h: Turn on multi-arch.
        * sparc-tdep.c (gdb_print_insn_sparc): Remove temp. multi-arch hack.

2000-05-17  Andrew Cagney  <cagney@sourceware.cygnus.com>

        * GDB 5.0 released.
        * Makefile.in (VERSION): Set to 5.0.

Mon May 22 16:20:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * inferior.h (make_cleanup_restore_inferior_status): 
        * infrun.c (make_cleanup_restore_inferior_status,
        do_restore_inferior_status_cleanup): New functions.
        * valops.c (hand_function_call): Use.
        * infcmd.c (disable_longjmp_breakpoint_cleanup): New function.
        (step_1): Use.
        * symfile.c (clear_symtab_users_cleanup): New function.
        (syms_from_objfile, reread_symbols): Use.
        * objfiles.c (make_cleanup_free_objfile, do_free_objfile_cleanup):
        New functions.
        * objfiles.h (make_cleanup_free_objfile): Add declaration.
        * symfile.c (syms_from_objfile, reread_symbols), hpread.c
        (hpread_build_psymtabs), hp-psymtab-read.c
        (hpread_build_psymtabs): Use.
        * dwarf2read.c (make_cleanup_free_die_list,
        do_free_die_list_cleanup): New functions.
        (psymtab_to_symtab_1): Use.
        * tracepoint.c (make_cleanup_free_actions,
        do_free_actions_cleanup): New functions.
        (read_actions): Use.
        * corelow.c (core_close_cleanup): New function.
        (core_open): Use.
        * dbxread.c (make_cleanup_free_bincl_list,
        do_free_bincl_list_cleanup): New function.
        (read_dbx_symtab): Use.
        * coffread.c (free_linetab_cleanup, free_stringtab_cleanup): New
        functions.
        (coff_symfile_read): Use.
        * varobj.c (make_cleanup_free_variable, do_free_variable_cleanup):
        New function.
        (varobj_create): Use.
        * sparcl-tdep.c (close_tty), infrun.c (resume_cleanups), parse.c
        (free_funcalls): Change signature to match make_cleanup_ftype.
        * infrun.c (resume), tracepoint.c (encode_actions), remote-udi.c
        (download), solib.c (open_symbol_file_object), sparcl-tdep.c
        (sparclite_open), parse.c (parse_exp_1): Remove cast using
        make_cleanup_func.

Mon May 22 15:49:13 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * procfs.c (info_proc_cmd): Use make_cleanup_freeargv.
        (proc_iterate_over_mappings): Use make_cleanup_close.
        (proc_get_LDT_entry): Ditto.
        (do_closedir_cleanup): New function.
        (proc_update_threads): Use.
        (do_destroy_procinfo_cleanup): New function.
        (info_proc_cmd): Use.

Mon May 22 15:21:38 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * top.h (command_loop_marker): Change signature to match
        make_cleanup_ftype.
        * top.c (command_loop_marker): Update.
        (command_loop, simplified_command_loop), event-top.c
        (command_handler): Remove cast using make_cleanup_func.
        * event-top.c (command_handler): Ditto.

        * top.c (do_chdir_cleanup): New function.
        (gdb_init): Use.  Use xstrdup instead of strsave.
        * top.c (do_fclose_cleanup): New function.
        (source_command): Use.
        * top.c (do_restore_instream_cleanup): Rename
        source_cleanup. Change signature to match make_cleanup.
        (read_command_filem execute_user_command): Update. Remove cast
        using make_cleanup_func.
        * top.c (do_free_command_lines_cleanup,
        make_cleanup_free_command_lines): New funtions.
        (get_command_line, read_command_lines): Use.
        * top.c (arg_cleanup): Change signature to match make_cleanup.
        (setup_user_args): Remove cast using make_cleanup_func.

Mon May 22 12:05:13 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * defs.h (t_reg): Delete typedef.
        (preg, preg_nz): Delete function. Replaced by phex and phex_nz.
        * utils.c (phex, phex_nz): New functions.
        (paddr, paddr_nz): Use.

        * monitor.c (monitor_store_register): Replace preg with phex.

Mon May 22 11:46:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Add note on typecast using catch_errors_ftype.

2000-05-21  Mark Kettenis  <kettenis@gnu.org>

        * i387-tdep.c (print_i387_value): Cast &value to (char *) in
        pointer arithmetic.  Fixes a bug which manifested itself on
        FreeBSD.

2000-05-20  J.T. Conklin  <jtc@redback.com>

        * target.h (target_memory_bfd_section): Removed declaration.
        * target.c (target_memory_bfd_section): Removed.
        * exec.c (xfer_memory): Removed #if'ed-out code which referenced
        target_memory_bfd_section.
        
        * target.h (target_read_memory_section): Removed declaration.
        * target.c (target_read_memory_section): Removed.
        (target_xfer_memory): Update, removed bfd_section argument.
        (target_read_string, target_read_memory, target_write_memory):
        Update for above change.

        * gdbcore.h (read_memory_section): Removed declaration.
        * corefile.c (read_memory_section): Removed.
        * jv-lang.c (get_java_utf8_name): Changed calls to
        read_memory_section to read_memory.
        * printcmd.c (printf_command): Likewise.
        * valops.c (value_at, value_fetch_lazy): Likewise.
        
2000-05-18  J.T. Conklin  <jtc@redback.com>

        * configure.host, configure.tgt (powerpc-*-netbsd*): New entry.
        * config/powerpc/nbsd.mh, config/powerpc/nbsd.mt,
        config/powerpc/tm-nbsd.h, config/powerpc/nm-nbsd.h,
        config/powerpc/xm-nbsd.h: New files.

2000-05-17  Eli Zaretskii  <eliz@is.elta.co.il>

        * gdb/config/djgpp/README: Fine-tune installation instructions
        based on user reports.

Wed May 17 18:27:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (build_warnings): List possible warnings.
        * configure: Regenerate.
        * TODO: More updates.
        * MAINTAINERS: Add Gary Thomas and Joern Renneck to Write After
        Approval.

Wed May 17 16:48:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-04-14 Gary Thomas <gthomas@redhat.com>:
        * config/v850/tm-v850.h: Change breakpoint sequence to be
        'br *' since there is no 16bit "illegal" instruction on this
        processor.

Tue May 16 18:57:14 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Review.  Delete anything that is no longer applicable.

Tue May 16 14:17:20 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * utils.c (free_current_contents): Make more robust.

Tue May 16 13:30:08 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * symtab.h (make_cleanup_discard_minimal_symbols): Replace
        discard_minimal_symbols.
        * minsyms.c (make_cleanup_discard_minimal_symbols):
        (do_discard_minimal_symbols_cleanup): New functions.

        * xcoffread.c (xcoff_initial_scan), somread.c (som_symfile_read),
        solib.c (solib_add_common_symbols), os9kread.c
        (os9k_symfile_read), nlmread.c (nlm_symfile_read), mipsread.c
        (mipscoff_symfile_read), elfread.c (elf_symfile_read), dstread.c
        (dst_symfile_read), dbxread.c (dbx_symfile_read), coffread.c
        (coff_symfile_read): Replace make_cleanup.

Mon May 15 09:32:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * command.h (add_set_cmd): Change VAR parameter to void pointer.
        (add_set_enum_cmd): Change VAR parameter to char pointer pointer.
        (struct command): Change member VAR to void pointer.
        * command.c (add_set_cmd, add_set_enum_cmd): Update.
        
        * remote.c (add_packet_config_cmd), mips-tdep.c
        (_initialize_mips_tdep), infrun.c (_initialize_infrun),
        i386-tdep.c (_initialize_i386_tdep), arm-tdep.c
        (_initialize_arm_tdep): Update VAR parameter to add_set_enum_cmd.

Tue May 16 12:46:04 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * wrapper.h (wrap_value_subscript): Delete declaration.

Tue May 16 10:54:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * defs.h (make_cleanup_bfd_close): Add declaration.
        * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_close): New
        functions.

        * symfile.c (generic_load), sparcl-tdep.c (download), remote-udi.c
        (download), remote-e7000.c (e7000_load), corelow.c (core_open,
        core_file_to_sym_file): Replace calls to make_cleanup.

Mon May 15 16:50:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Add notes on register cache.

Mon May 15 21:27:27 2000  J"orn Rennecke <amylaar@cygnus.co.uk>

        * sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
        (sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
         bfd_mach_sh3_dsp.
        (sh_show_regs): Floating point registers are called fr0-fr15.
        For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
        Handle sh-dsp and sh3-dsp.
        config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
        don't have floating point registers.
        (DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
        (M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
        (Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.

2000-05-15  Eli Zaretskii  <eliz@is.elta.co.il>

        * Makefile.in (gdbtypes.o, varobj.o): Depend on wrapper.h.

        * wrapper.h (gdb_value_subscript, wrap_value_subscript): Add
        prototypes.

Mon May 15 15:31:30 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * valops.c (hand_function_call): Replace #ifdef
        SAVE_DUMMY_FRAME_TOS with if SAVE_DUMMY_FRAME_TOS_P.

        * gdbarch.sh (SAVE_DUMMY_FRAME_TOS): Add.
        * gdbarch.h, gdbarch.c: Regenerate.

Mon May 15 16:05:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * ax.h (make_cleanup_free_agent_expr): Add declaration.
        * ax-general.c (do_free_agent_expr_cleanup): 
        (make_cleanup_free_agent_expr): New functions.

        * tracepoint.c (validate_actionline, encode_actions), ax-gdb.c
        (expr_to_agent, gen_trace_for_expr, agent_command): Replace calls
        to make_cleanup.

Mon May 15 14:06:23 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * breakpoint.h (make_cleanup_delete_breakpoint,
        make_exec_cleanup_delete_breakpoint): Declare.
        * breakpoint.c (make_cleanup_delete_breakpoint,
        make_exec_cleanup_delete_breakpoint,
        do_delete_breakpoint_cleanup): New fuctions.
        
        * infcmd.c (finish_command), hppa-tdep.c (hppa_pop_frame),
        breakpoint.c (until_break_command, until_break_command): Replace
        call to make_cleanup / make_exec_cleanup.

Mon May 15 13:25:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * defs.h (core_addr_greaterthan, core_addr_lessthan), utils.c
        (core_addr_greaterthan, core_addr_lessthan): Move from here.
        * arch-utils.h (core_addr_greaterthan, core_addr_lessthan),
        arch-utils.c (core_addr_greaterthan, core_addr_lessthan): To here.

Mon May 15 12:07:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * printcmd.c (print_frame_args), stack.c (print_frame), command.c
        (do_setshow_command), breakpoint.c (print_it_typical, mention):
        Use make_cleanup_ui_out_stream_delete.

Mon May 15 11:23:23 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * proc-events.c (init_syscall_table): Delete stray ``;''.
        * ui-out.c (ui_out_set_flags, ui_out_clear_flags): Return old
        value.
        * mdebugread.c (START_PSYMTAB): Add paren to avoid x=x=x.

2000-05-12  Michael Snyder  <msnyder@cygnus.com>

        * config/i386/tm-i386sol2.h (COERCE_FLOAT_TO_DOUBLE): Define.
        
2000-05-12  Kevin Buettner  <kevinb@redhat.com>

        * dwarf2read.c (dwarf2_const_value_data): Fix typo in sign
        extension code.

Fri May 12 20:38:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Mention weak symbol problem.  Mention UnixWare thread
        problem.

Fri May 12 14:12:17 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * README: Update section on kernel debugging.

Fri May 12 19:13:15 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (mips_get_saved_register): New function.  Handle
        case of 32 ABI saving 32 bit registers on stack when target has 64
        bit ISA.
        (mips_gdbarch_init): Update.

Fri May 12 14:46:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (MIPS_EABI): Fix typo.  Test for MIPS_ABI_EABI64.

Thu May 11 21:52:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (WERROR_CFLAGS): Check that GCC accepts a -W
        options before using them. Report result.
        * configure: Regenerate.
        
2000-05-11  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * coffread.c (coff_symtab_read): In the case of C_THUMBEXT |
        C_THUMBEXTFUNC | C_EXT, sec will never ever be the index for
        .rodata, because cs_to_section doesn't deal with .rodata. Fix test
        accordingly.

Thu May 11 21:33:59 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh (gdbarch_dump): Print the value of GDB_MULTI_ARCH.
        Always check that a macro is defined before printing it.
        * gdbarch.c: Re-generate.

Thu May 11 17:22:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * README: Update for GDB 5.0.

Thu May 11 13:24:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (MIPS_DEFAULT_STACK_ARGSIZE): Fix typo.

        * config/mips/tm-irix5.h (GDB_MULTI_ARCH): Add
        definition. Disable.  Document known problems.
        (MIPS_DEFAULT_ABI): Define.

        * mips-tdep.c (enum mips_abi): Define.
        (struct gdbarch_tdep): Replace mips_eabi with mips_abi.
        (MIPS_EABI): Update.
        (mips_gdbarch_init): Add preliminary support for IRIX N32 ABI.
        Determine ABI from either ELF_FLAGS or MIPS_DEFAULT_ABI. When
        looking for a matching architecture require a matching MIPS_ABI.
        (mips_gdbarch_init): Cleanup arch_debug information.

2000-05-10  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * solib.c (symbol_add_stub): Remember the index and the name of
        the section with the lowest address. Use this data (instead of
        data from .text) to pass info into symbol_file_add.

        * elfread.c (record_minimal_symbol_and_info): Use the section 
        where the symbol lives to get the index, instead of guessing.

2000-05-10  Michael Snyder  <msnyder@cygnus.com>

        Make Sparc a Multi-Arch target.  Discard PARAMS macro (require ANSI).
        * sparc-tdep.c: include arch-utils.h.
        (SPARC_HAS_FPU, FP_REGISTER_BYTES, FP_MAX_REG NUM, SPARC_INTREG_SIZE,
        DUMMY_REG_SAVE_OFFSET): provide multi-arch-compatible definitions.
        (GDB_TARGET_IS_SPARC64): make into a runtime test.
        (struct frame_extra_info): Define, use instead of the macro.
        (Many places): Use alloca instead of statically allocated buffers
        that depend on a multi-arch variable such as MAX_REGISTER_RAW_SIZE.
        (sparc_extract_struct_value_address): Accept a pointer arg instead
        of an array sized by REGISTER_BYTES.
        (examine_prologue): Accept a pointer to an array of CORE_ADDR, 
        instead of the defunct struct frame_saved_regs.  Recognize new
        Sparc64 store instructions as part of the prologue.  Ignore the
        destination of a frame store when parsing the prologue (so long
        as it's on the stack).
        (sparc_push_dummy_frame): Fix incorrect buffer offset for PSTATE.
        (sparc_frame_find_saved_regs): Accept a ptr to an array of CORE_ADDR
        instead of the defunct struct frame_saved_regs.
        (supply_gregset): Discard unnecessary 'zerobuf': just send NULL to
        supply_register.  Provide 4-byte offset to compensate for diff
        between size of the prgreg_t elements on a 64-bit host and size
        of the registers for a 32-bit target.  Fill all inaccessible regs
        with zero so they won't keep being requested again and again.
        (fill_gregset): Handle 32/64 size difference between registers
        and prgreg_t.  Handle as many new 64-bit regs as possible.
        (supply_fpregset, fill_fpregset): Attempt to handle 64-bit world.
        (sparc_push_arguments): Rename to sparc32_push_arguments.
        Copy arguments into registers as well as onto stack, so that the
        CALL_DUMMY (code pushed onto the target stack) is not required.
        (sparc_extract_return_value): Rename to sparc32_extract_return_value.
        (sparc_store_return_value): Use memset instead of bzero.
        Use write_register_gen instead of write_register_bytes.
        (sparclet_store_return_value): New function.
        (_initialize_sparc_tdep): Call register_gdbarch_init to activate
        the gdbarch multi-architecture system.
        (sp64_push_arguments): Rename to sparc64_push_arguments.
        Extend to store arguments in general registers as well as on stack.
        (sparc64_extract_return_value): Rename to sp64_extract_return_value.
        Use as a private function, to be called by the new external function
        sparc64_extract_return_value.
        (sparclet_extract_return_value): New function.
        (sparc32_stack_align, sparc64_stack_align, sparc32_register_name,
        sparc64_register_name, sparc_print_extra_frame_info,
        sparclite_register_name, sparclet_register_name, 
        sparc_push_return_address, sparc64_use_struct_convention, 
        sparc32_store_struct_return, sparc64_store_struct_return, 
        sparc32_register_virtual_type, sparc64_register_virtual_type, 
        sparc32_register_size, sparc64_register_size, 
        sparc32_register_byte, sparc64_register_byte, 
        sparc_gdbarch_skip_prologue, sparc_convert_to_virtual, 
        sparc_convert_to_raw, sparc_frame_init_saved_regs, 
        sparc_frame_address, sparc_gdbarch_fix_call_dummy, 
        sparc_coerce_float_to_double, sparc_call_dummy_address, 
        sparc_y_regnum, sparc_reg_struct_has_addr, sparc_intreg_size,
        sparc_return_value_on_stack): New functions supporting multi-arch.
        (sparc_gdbarch_init): New function; initialize multi-arch.
        (struct gdbarch_tdep): Define, use for private multi-arch data.
        * config/sparc/tm-sparc.h: Move definitions around, enclose with
        #ifdef GDB_MULTI_ARCH tests, provide some multi-arch alternate
        definitions.  Add enums for register names, to help debugging gdb.
        This header file must work for non-multi-arch and for multi-arch.
        * config/sparc/tm-sp64.h: Add GDB_MULTI_ARCH configuration.  Also add
        AT_ENTRY_POINT definitions for CALL_DUMMY, for non-multi-arch case.
        Define GDB_MULTI_ARCH.
        * config/sparc/tm-sparclet.h: Add GDB_MULTI_ARCH configuration.
        Do not define GDB_MULTI_ARCH (bfd does not correctly identify target).
        * config/sparc/tm-sparclite.h: Ditto.
        * config/sparc/tm-sun4sol2.h: Define GDB_MULTI_ARCH.
        * sparclet-rom.c (sparclet_regnames): Initialize explicitly, to
        avoid using deprecated REGISTER_NAMES macro.
        * Makefile.in: Let sparc-tdep.c depend on arch-utils.h.

2000-05-08  Michael Snyder  <msnyder@cygnus.com>

        * gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers.
        * gdbarch.c, gdbarch.h: Regenerate.
        * core-regset.c: Change FP0_REGNUM to a runtime test.
        * procfs.c: Ditto.
        * sun3-nat.c: Ditto.
        * sparc-tdep.c: Ditto.
        
        * i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM.
        * ptx4-nat.c: Ditto.

        * sol-thread.c (sol_thread_create_inferior): only add the thread
        to the thread list if it is not already in there.
        (prototypes for thread_db func ptrs): pretty up formatting.

2000-05-08  Eli Zaretskii  <eliz@is.elta.co.il>

        * config/djgpp/djconfig.sh: Use more warning switches.

        * config/djgpp/fnchange.lst: Replace the leading gdb-0222 with the
        @V@ placebo.  djunpack.bat changed accordingly.

Mon May  8 11:19:47 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c (size_auto, size_32, size_64, size_enums): Rename
        saved_gpreg_size_auto, saved_gpreg_size_32, saved_gpreg_size_64
        and saved_gpreg_size_enums.
        (mips_stack_argsize): Update. Cleanup.

        * mips-tdep.c (STACK_ARGSIZE): Delete macro.  Replaced by
        MIPS_STACK_ARGSIZE.
        (MIPS_NABI32): Delete macro. Replaced by
        MIPS_REGS_HAVE_STACK_HOME_P.
        (mips_push_arguments): Update.
        (mips_push_arguments): Replace check for MIPS_EABI or MIPS_NABI32
        with test for MIPS_REGS_HAVE_STACK_HOME_P.
        (MIPS_REGS_HAVE_STACK_HOME_P): Define.  Provide non- multi-arch
        default.
        (struct gdbarch_tdep): Add mips_regs_have_stack_home_p and
        mips_default_stack_argsize.
        (MIPS_STACK_ARGSIZE): Define as mips_stack_argsize.
        (mips_stack_argsize_string): New static variable.
        (mips_stack_argsize): New function, handle default case.
        (__initialize_mips_tdep): Add command ``set mips stack-arg-size''
        implemented as an enum using size_auto et.al.
        (mips_gdbarch_init): Initialize mips_default_stack_argsize and
        mips_regs_have_stack_home_p.

        * config/mips/tm-irix5.h (MIPS_DEFAULT_SAVED_REGSIZE): Define as 8
        for n32.
        (MIPS_REGS_HAVE_STACK_HOME_P): Define as 0 for n32.

Mon May  8 00:49:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * procfs.c (PROCFS_TRACE): Delete definition.
        * proc-utils.h (PROCFS_NOTE, PROC_PRETTYFPRINT_STATUS): Always
        define.

2000-05-05  Michael Snyder  <msnyder@cygnus.com>

        * procfs.c: Cleanup of procfs tracing.  Move defines and 
        prototypes to proc-utils.h
        * proc-utils.h: Define tracing macros.  Declare trace functions.
        * proc-api.c: Make procfs tracing a runtime option.
        (prepare_to_trace): New function, abstracted out of several
        places.  Open a trace file if one is required.
        (ioctl_with_trace, write_with_trace, open_with_trace, 
        close_with_trace, wait_with_trace, lseek_with_trace):
        Report errno if an error occurs in a system call.
        (write_with_trace): Make 2nd arg void *, to agree with write.

2000-05-05  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * elfread.c (elf_symtab_read): The calculation of 'offset' 
        must be done for each symbol, not just once. The index 
        used must be the index of the section where 'sym' resides,
        not .text.

2000-05-05  Michael Snyder  <msnyder@cygnus.com>

        * procfs.c (many functions): change int cmd; to long cmd;
        Solaris /proc API calls this parameter a long, and requires it
        for 64-bit hosts (where sizeof(long) != sizeof(int)).  UnixWare
        calls it an int, but on existing UnixWare hosts, int and long
        are the same size.  So long it must be.  If a future UnixWare
        version has problems with this, we'll have to use autoconf.
        * proc-api.c (write_with_trace): use long instead of int.

2000-05-04  Mark Kettenis  <kettenis@gnu.org>

        * i386-linux-nat.c: Define PT_READ_U and PT_WRITE_U if they're not
        already defined.

2000-05-01  Mark Kettenis  <kettenis@gnu.org>

        * infrun.c (handle_inferior_event): Add missing call to keep_going
        and missing return when handling an ordinary signal from the
        inferior.

2000-05-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * objfiles.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
        SECT_OFF_RODATA): Define as functions of OBJFILE.  Add
        sect_index_text, sect_index_data, sect_index_rodata,
        sect_index_bss to objfile structure.
        * gdb-stabs.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
        SECT_OFF_RODATA): Remove.
        * objfiles.c (allocate_objfile): Initialize
        sect_index_{text,data,bss,rodata} to -1, for error detection.

        * symfile.c (default_symfile_offsets): Initialize
        sect_index_{text,data,bss,rodata} from bfd information.
        * xcoffread.c (xcoff_symfile_offsets): Ditto.
        * somread.c (som_symfile_offsets): Initialize
        sect_index_{text,data,bss,rodata}.

        * coffread.c, dbxread.c, elfread.c, hp-psymtab-read.c,
        hp-symtab-read.c, hpread.c, mdebugread.c, minsyms.c,
        mipsread.c, objfiles.c, os9kread.c, pa64solib.c, partial-stab.h,
        remote-os9k.c, remote-vx.c, remote.c, rs6000-nat.c, somsolib.c,
        stabsread.c, symfile.c, xcoffread.c:
        Update use of SECT_OFF_{TEXT,DATA,BSS,RODATA} to depend on the
        current objfile.

        * xcoffread.c: Add new field objfile to find_targ_sec_arg.

Thu May  4 20:54:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * config/mips/tm-mipsv4.h (Dest_Reg), config/mips/tm-irix5.h
        (MIPS_NUM_ARG_REGS, Dest_Reg), config/mips/tm-mips.h
        (MIPS_NUM_ARG_REGS), config/mips/tm-mips.h (MIPS_NUM_FP_ARG_REGS):
        Delete unused macros.

2000-05-03  Michael Snyder  <msnyder@cygnus.com>

        * solib.c (elf_locate_base, info_sharedlibrary_command):
        Look at the bfd to determine if it is elf32 or elf64, rather
        than using an ifdef.  This makes it runtime teststable and
        multi-arch.

2000-05-01  Mark Kettenis  <kettenis@gnu.org>

        * infrun.c (handle_inferior_event): When doing a "next", and
        stepping out of a signal handler into its calling trampoline
        ignore the value of step_frame_address.
        (step_over_function): Only modify step_resume_breakpoint->frame if
        the value of step_frame_address is non-zero.

2000-05-03  Michael Snyder  <msnyder@cygnus.com>

        * monitor.c (monitor_fetch_register): MAX_REGISTER_RAW_SIZE
        is not static in the MULTI_ARCH world, so don't use it in a
        static array declaration.

2000-05-03  Elena Zannoni  <ezannoni@makita.cygnus.com>

        * symtab.c (in_prologue): From Jim Blandy. Rewrite, more
        intelligently, making sure we use the information from the 
        symbol tables fully.

2000-05-02  H.J. Lu  <hjl@gnu.org>

        * ia64-tdep.c (ia64_gdbarch_init): Reference to ELFOSABI_NONE
        instead of ELFOSABI_SYSV.

Tue May  2 19:07:20 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh (NPC_REGNUM, NNPC_REGNUM): Add.
        * gdbarch.h, gdbarch.c: Re-generate.

        * gdbserver/remote-utils.c (prepare_resume_reply): Change #ifdef
        NPC_REGNUM to run-time test.
        * findvar.c (generic_target_write_pc): Change #ifdef NPC_REGNUM
        and NNPC_REGNUM to run-time test.
        * procfs.c (procfs_fetch_registers): Change #ifdef NPC_REGNUM to
        run-time test.
        (procfs_store_registers): Ditto.

Tue May  2 18:48:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh: Provide non- multi-arch defaults by direct
        definition in "gdbarch.h" instead of going through "gdbarch.c".
        * gdbarch.h, gdbarch.c: Re-generate.
        * defs.h: When non- multi-arch, include "arch-utils.h" so that
        legacy definitions are globally visible.
        
Tue May  2 16:32:06 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Add Syd Polk to gdbtk maintainers.
        (symtabs): Add Elena to symtabs maintainers list.
        (Blanket Write Privs): Add Jim Blandy.

2000-05-01  Stan Shebs  <shebs@apple.com>

        Remove obsolete Gould configuration:
        * configure.host, configure.tgt: Remove Gould configs.
        * Makefile.in: Remove Gould-related actions.
        * gould-xdep.c, gould-tdep.c, config/gould/*: Remove files.
        * NEWS: Mention removal.
        
Mon May  1 15:37:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-04-28 Andreas Jaeger <aj@suse.de>:
        * defs.h: Properly check for GCC version number.

2000-04-30  Mark Kettenis  <kettenis@gnu.org>

        Fix single-stepping out of signal trampolines.
        * config/i386/nm-linux.h (CHILD_RESUME): Define.
        * i386-linux-nat.c (child_resume): New function.

Fri Apr 28 16:22:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * blockframe.c (frameless_look_for_prologue): Use
        PROLOG_FRAMELESS_P instead of SKIP_PROLOGUE_FRAMELESS_P.
        * gdbarch.sh (PROLOG_FRAMELESS_P): Define.
        * gdbarch.h, gdbarch.c: Re-generate.
        * arch-utils.h, arch-utils.c (generic_prologue_frameless_p): New
        function.
        
Fri Apr 28 15:31:10 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From "Serge Nikulin" <nikulin@actsw.amat.com>:
        * m68k-tdep.c (delta68_in_sigtramp): Return 0 when the function
        name is unknow.

2000-04-27  Michael Snyder  <msnyder@cygnus.com>

        * gdbarch.sh (d10v_daddr_p, d10v_iaddr_p, d10v_convert_daddr_to_raw,
        d10v_convert_iaddr_to_raw): make these multi-arch functions optional.
        * gdbarch.c, gdbarch.h: regenerate
        
Fri Apr 28 12:21:28 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Tim Mooney <mooney@dogbert.cc.ndsu.nodak.edu>:
        * target.c (do_monitor_command): Cast tcomplain to correct
        function type in comparison.

Fri Apr 28 11:43:05 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-04-25 Guy Harris <guy@netapp.com>:
        * config/alpha/alpha-osf3.mh (XDEPFILES): Add ser-tcp.o and
        ser-pipe.o

2000-04-27  Michael Snyder  <msnyder@cygnus.com>

        * jv-valprint.c (java_val_print): Add arg declaration, 
        fix compiler warning.
        * corelow.c (core_open): Call set_gdbarch_from_file so that 
        gdbarch becomes aware of the architecture encoded in the 
        corefile.
        * findvar.c (write_register_gen): Export this useful interface.
        * value.h (write_register_gen): Declare.

2000-04-27  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * cxux-nat.c (add_shared_symbol_files): Don't treat .text section
        as special in the section_addr_info structure.
        * pa64solib.c (pa64_solib_add_solib_objfile): Ditto.
        * osfsolib.c (symbol_add_stub): Ditto.
        * irix5-nat.c (symbol_add_stub): Ditto.

Thu Apr 27 14:07:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * mips-tdep.c, d10v-tdep.c: Include "arch-utils.h".

Thu Apr 27 10:06:42 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Document IRIX X ARM cross compile problems.

2000-04-26  Michael Snyder  <msnyder@cygnus.com>

        * utils.c (internal_verror): Call target_terminal_ours.
        * wrapper.h: Fix minor comment typo.
        * proc-api.c (write_with_trace): Change 'arg' from long to int.
        Treat 'off_t' and 'size_t' as unsigned long in printfs.
        (lseek_with_trace): Treat 'off_t' as unsigned long in printf.
        * procfs.c (comments): Eliminate "???" in comments, which GCC
        wants to interpret as a trigraph.  (fill_gregset, supply_gregset,
        fill_fpregset, supply_fpregset): Declare.
        (procfs_wait): Sysargs is a long, change printf format to match.
        (test-mapping, mapping_test, test_mapping_cmd) Remove (test only).

2000-04-26  Kevin Buettner  <kevinb@redhat.com>

        * config/djgpp/fnchange.lst (ia64-linux-nat.c): Map to
        ia64linux-nat.c.

Wed Apr 26 13:50:35 2000  Philippe De Muyter  <phdm@macqel.be>

        * ax-gdb.c (agent_command): Remove now useless cast of
        `free_current_contents' when passed to `make_cleanup'.
        * coffread.c (coff_symfile_read): Ditto.
        * dwarf2read.c (dwarf2_add_member_fn, read_array_type): Ditto.
        (dwarf_decode_lines): Ditto.
        * eval.c (parse_and_eval_address, parse_and_eval_address_1): Ditto.
        (parse_and_eval, parse_to_comma_and_eval): Ditto.
        * parse.c (parse_exp_1): Ditto.
        * printcmd.c (print_command_1, output_command, set_command): Ditto.
        (x_command, print_frame_args, printf_command): Ditto.
        * top.c (execute_control_command): Ditto.
        * tracepoint.c (validate_actionline): Ditto.
        * typeprint.c (whatis_exp, ptype_command): Ditto.
        (maintenance_print_type): Ditto.

2000-04-26  Kevin Buettner  <kevinb@redhat.com>

        * Makefile.in (ALLDEPFILES): Add ia64-linux-tdep.c.
        (ia64-linux-tdep.o): Add dependencies.
        (ia64-tdep.o): Add dependency for arch-utils.h.
        * ia64-linux-tdep.c, ia64-tdep.c (arch-utils.h): Include.

2000-04-25  Michael Snyder  <msnyder@cygnus.com>

        * blockframe.c: Fix a minor typo in a comment.

2000-04-25  Kevin Buettner  <kevinb@redhat.com>

        * ia64-tdep.c (examine_prologue): Recognize store instructions;
        those whose source operands are input registers which haven't
        been seen before are considered to be part of the prologue.

Tue Apr 25 13:51:58 2000  glen mccready  <gkm@pobox.com>

        * rs6000-nat.c (xcoff_relocate_symtam): Recover from the wrong
        patch being applied `Fri Apr  7 13:44:38 2000'.

2000-04-24  Kevin Buettner  <kevinb@redhat.com>

        * ia64-linux-tdep.c: New file.
        * ia64-tdep.c (elf-bfd.h): Include.
        (ia64_linux_sigcontext_register_address): New extern declaration.
        (struct gdbarch_tdep): New struct.
        (SIGCONTEXT_REGISTER_ADDRESS): New define.
        (read_sigcontext_register): New static function.
        (extract_bit_field, replace_bit_field, slotN_contents,
        replace_slotN_contents): Made static.
        (ia64_frame_chain, ia64_frame_saved_pc, ia64_init_extra_frame_info):
        Added new code for signal handler frames and call dummy frames.
        (ia64_frame_init_saved_regs): Handle signal handler frames.
        (ia64_find_saved_register): Removed.
        (ia64_get_saved_register): Handle call dummy frames; reorganized
        to call generic_get_saved_register() to find registers saved
        in previous frames.
        (process_note_abi_tag_sections): New static function.
        (ia64_gdbarch_init): Attempt to determine the ABI/OS of the
        executable.  Based upon this information, set target dependent
        field sigcontext_register_address appropriately.  Also set
        FRAME_CHAIN_VALID to be generic_func_frame_chain_valid.
        * config/ia64/linux.mt (TDEPFILES): Add ia64-linux-tdep.o.
        * config/ia64/tm-linux.h (IN_SIGTRAMP): Define.
        (ia64_linux_in_sigtramp): New declaration.

2000-04-23  Eli Zaretskii  <eliz@is.elta.co.il>

        * TODO, NEWS: Update due to inclusion of gdbmi.texinfo in the GDB
        manual.

2000-04-23  Eli Zaretskii  <eliz@is.elta.co.il>

        * config/djgpp/README: Explain how to unpack using djunpack.bat.

Fri Apr 21 15:23:13 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * stabsread.c (REG_STRUCT_HAS_ADDR): Delete default.
        (define_symbol): Check REG_STRUCT_HAS_ADDR_P before using
        REG_STRUCT_HAS_ADDR.
        (define_symbol): Ditto.

        * valops.c (hand_function_call): Replace #ifdef
        REG_STRUCT_HAS_ADDR with if REG_STRUCT_HAS_ADDR_P.  Re-indent
        affected code.

        * gdbarch.sh (REG_STRUCT_HAS_ADDR): Add along with the predicate
        function REG_STRUCT_HAS_ADDR_P.
        * gdbarch.h, gdbarch.c: Re-generate.
        
2000-04-21  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * gdb-stabs.h (SECT_OFF_MAX): Increase to 40.

2000-04-21  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * win32-nat.c  (handle_load_dll): Don't treat .text as a special
        section anymore.
        * somread.c (som_symfile_offsets): Ditto.
        * somsolib.c (som_solib_add_solib_objfile): Ditto.

Fri Apr 21 16:14:38 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Make Jimmy Guo TUI maintainer.

Fri Apr 21 14:37:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * command.h (help_all): Delete declaration.
        * command.c (help_all): Add declaration.  Convert function
        argument list to ISO-C.

Thu Apr 20 18:15:08 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * d10v-tdep.c (d10v_gdbarch_init): Initialize stack_align.
        (d10v_stack_align): Make static.
        * config/d10v/tm-d10v.h (STACK_ALIGN): Delete.

Thu Apr 20 14:35:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * valops.c (hand_function_call): Replace #ifdef STACK_ALIGN with
        run-time test for STACK_ALIGN_P.
        * gdbarch.sh: Add support for function and variable predicates.
        (STACK_ALIGN): Add.  Implement with predicate - STACK_ALIGN_P.
        * gdbarch.h, gdbarch.c: Re-generate.

Thu Apr 20 17:39:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * defs.h, utils.c (free_current_contents): Change parameter to
        void*.

        From Philippe De Muyter  <phdm@macqel.be>:
        * printcmd.c (print_address_symbolic): Call `make_cleanup' with
        `(free_current_contents, &x)', not `(free, x)'.
        * utils.c (free_current_contents): Do not `free (NULL)'.

        * printcmd.c (print_address_symbolic): Cleanup after a failed
        call to build_address_symbolic.

2000-04-20  Christopher Faylor  <cgf@cygnus.com>

        * wince-stub.c (FREE): New macro.
        (mempool): Just free any buffer prior to reuse.  Don't bother with
        realloc.
        (flag_single_step): New function.
        (skip_message): Detect "helpful" Windows CE messages and skip sending
        them to the host.
        (wait_for_debug_event): Use skip_message to avoid sending debug
        messages to the host.
        (dispatch): Prelimary implementation of single step detection.
        * wince.c: Rework SH single stepping code to be more consistent with
        other wince targets.
        (handle_output_debug_string): Allow first chance exceptions to come
        through since they seem to be all that we get on some versions of
        Windows CE.
        (check_for_step): New function, conditionally compiled based on target.
        (regptr): Delete obsolete function.
        (handle_exception): Detect illegal instructions.
        (get_child_debug_event): Return success only if event code matches
        target.
        (child_create_inferior): Reflect change to get_child_debug_event
        arguments.

2000-04-20  Christopher Faylor  <cgf@cygnus.com>

        * win32-nat.c (thread_rec): Be more defensive about suspending already
        suspended threads.
        (safe_symbol_file_add_stub): New function.
        (safe_symbole_file_add_cleanup): New function.
        (safe_symbol_file_add): New function.
        (handle_load_dll): Use wrapper to add DLL symbol information to avoid
        bogus errors from non-stabs DLLs.
        (handle_exception): Add work around for detection of first exception
        breakpoint which does not seem to occur on W2K.  Detect more "signals"
        that can be effectively passed to the debuggee.  Reorganize to eliminate
        continue_status global.
        (child_continue): Reorganize to eliminate continue_status global.
        (child_wait): Ditto.
        (child_resume): Ditto.
        (get_child_debug_event): Ditto.  Recognize when an a breakpoint
        exception should be ignored.  Change method for signalling when an
        important event has occured to the caller.
        (child_create_inferior): Use new method for noticing when
        get_child_debug_event has found something interesting.

Fri Apr  7 13:44:38 2000  glen mccready  <gkm@pobox.com>

        * rs6000-nat.c (xcoff_relocate_symtab): Grow buffer if ptrace()
          fails due to lack of space.

Fri Mar 24 12:10:38 2000  glen mccready  <gkm@pobox.com>

        * command.c, command.h (help_all): Add functionality to display
        a complete listing of available commands.

2000-04-20  Scott Bambrough <scottb@netwinder.org>

        * arm-linux-nat.c (PIDGET, TIDGET): New.
        (get_thread_id, GET_THREAD_ID): New.
        (fetch_nwfpe_register, store_nwfpe_register): New.
        (fetch_register, store_register): New.
        (fetch_fpregister, store_fpregister): New.
        (fill_gregset, supply_gregset): New.
        (fill_fpregset, supply_fpregset): New.
        (fetch_fpregs): Modified to use thread id's.
        (store_fpregs): Modified to use thread id's and
        fetch_nwfpe_register.
        (fetch_regs): Modified to use thread id's.
        (store_regs): Modified to use thread id's.
        (fetch_inferior_registers): Modified to handle single register
        fetches.
        (store_inferior_registers): Modified to handle single register
        stores.
        (arm_linux_register_u_addr): Removed.

        * configure.tgt: Added gdbserver to configdirs for arm*-*-linux*.

        * config/arm/linux.mh
        (NATDEPFILES): Removed core-aout.o.  Added core-regset.o.
        (LOADLIBES): Define.

        * config/arm/nm-linux.h: Include config/nm-linux.h.
        (ATTACH_DETACH): Removed.  Defined in config/nm-linux.h.
        (REGISTER_U_ADDR): Removed.
        (SVR4_SHARED_LIBS): Removed.  Defined in config/nm-linux.h.
        (#include "solib.h"): Removed.  Included via config/nm-linux.h.

Thu Apr 20 18:54:15 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Daniel Berlin <dan@cgsoftware.com> and Tim Mooney
        <mooney@dogbert.cc.ndsu.nodak.edu>:
        * infrun.c (follow_fork_mode_kind_names): NULL terminate
        array. Re-indent.
        (scheduler_enums): Ditto.

Mon Apr 17 13:37:10 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh: Make multi-arch variable defaults, defaults for non-
        multi-arch targets.
        (TARGET_BFD_VMA_BIT, IEEE_FLOAT, CALL_DUMMY_WORDS,
        SIZEOF_CALL_DUMMY_WORDS): Update.

        * inferior.h (CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS): Default
        provided by gdbarch.
        (CALL_DUMMY_P): Add FIXME. gdbarch should provide default.

        * valprint.c (IEEE_FLOAT): Default provided by gdbarch.

2000-04-19  Jim Blandy  <jimb@redhat.com>

        Bring RETURN_VALUE_ON_STACK under gdbarch's control.
        * gdbarch.sh (RETURN_VALUE_ON_STACK): New entry.
        * gdbarch.c, gdbarch.h: Regenerated.
        * arch-utils.c (default_return_value_on_stack): New function.
        * arch-utils.h (default_return_value_on_stack): New declaration.
        * values.c (RETURN_VALUE_ON_STACK): Delete default definition.

        * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
        two-dimensional array, instead of faking it with explicit index
        arithmetic.

        * minsyms.c (prim_record_minimal_symbol_and_info): Doc fix.
        (Thanks to Guy Harris.)

2000-04-19  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * xcoffsolib.c (solib_add): Fix call to vmap_symtab().

2000-04-19  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>

        * TODO:  Update.

Wed Apr 19 19:10:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Document -Wreturn-type problem.

2000-03-27  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
 
         * maint.c (_initialize_maint_cmds):  Add `mt i' alias for `mt info'.
 
2000-03-27  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>

        * infcmd.c (_initialize_infcmd):  Add `info r' alias for
        `info registers'.

Wed Apr 19 17:03:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Philippe De Muyter <phdm@macqel.be>:
        * bcache.c (free_bcache): Do not free NULL.

Wed Apr 19 16:37:47 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Cleanup.
        * NEWS: Update GDB version.  Duplicate paragraph explaining
        obsolete.

Wed Apr 19 13:06:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (distclean): Delete tui/Makefile.
        * TODO: Add deletion of tui/Makefile.in to list.
        
2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * symfile.h (struct section_addr_info ): Remove fields for special
        treatment of .text, .data and .bss sections.

        * solib.c (symbol_add_stub): The special field text_addr is not
        available anymore. Search for the .text field the hard way.

        * symfile.c (build_section_addr_info_from_section_table): Don't
        fill in {text, data, bss}_addr any more.
        (default_symfile_offsets): Don't use {text, data, bss}_addr fields
        to fill in section_offsets for objfile.
        (syms_from_objfile): Don't deal with {text, data, bss}_addr as a
        special case anymore.
        (add_symbol_file_command): Ditto.

2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        symfile.c: (symbol_file_command): Remove support for rombug, to
        simplify code.

2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * symfile.c (add_symbol_file_command): Rewrite the arguments
        processing part. Simplify syntax of command. Remove support for
        rombug.
        (_initialize_symfile): Update help message for add-symbol-file
        command.

Mon Apr 17 15:53:38 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh (IEEE_FLOAT): Only dump when defined.
        * gdbarch.h, gdbarch.c: Re-generate.

Mon Apr 17 11:26:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote.c (REMOTE_TRANSLATE_XFER_ADDRESS), mem-break.c
        (MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT), target.h
        (BREAKPOINT_FROM_PC), valops.c (COERCE_FLOAT_TO_DOUBLE),
        gdbarch.sh (D10V_MAKE_DADDR, D10V_MAKE_IADDR,
        FRAMELESS_FUNCTION_INVOCATION, REGISTER_CONVERTIBLE,
        REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
        REGISTER_NAME), findvar.c (POINTER_TO_ADDRESS,
        ADDRESS_TO_POINTER): Delete default definition.  Handled by
        gdbarch.

        * gdbarch.sh: Make multi-arch defaults, defaults for non-
        multi-arch targets.
        (REGISTER_NAME, COERCE_FLOAT_TO_DOUBLE, REGISTER_CONVERTIBLE,
        REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
        D10V_MAKE_DADDR, D10V_MAKE_IADDR, BREAKPOINT_FROM_PC,
        MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT,
        REMOTE_TRANSLATE_XFER_ADDRESS, FRAMELESS_FUNCTION_INVOCATION):
        Provide default/legacy implementation.
        (REGISTER_NAMES, CALL_DUMMY): Allow legacy definition.
        * gdbarch.h, gdbarch.c: Re-generate.

2000-04-16  Jim Blandy  <jimb@redhat.com>

        * findvar.c (store_typed_address, extract_typed_address): Fix
        function names in error messages.

2000-04-16  Eli Zaretskii  <eliz@is.elta.co.il>

        * config/djgpp/config.sed: Fix the lines which edit clean: and
        uninstall-info: targets.

2000-04-14  Jim Blandy  <jimb@redhat.com>

        Bring IEEE_FLOAT under gdbarch's control.
        * gdbarch.sh (IEEE_FLOAT): New entry.
        * gdbarch.c, gdbarch.h: Regenerated.
        * valprint.c (IEEE_FLOAT): Provide a default #definition for this.
        (print_floating): Use IEEE_FLOAT as if it were an expression; use
        the code specific to IEEE-format numbers whenever the value of
        IEEE_FLOAT is non-zero.
        * config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
        config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
        config/h8300/tm-h8300.h, config/i386/tm-i386.h,
        config/i960/tm-i960.h, config/m88k/tm-m88k.h,
        config/mips/tm-mips.h, config/pa/tm-hppa.h,
        config/sparc/tm-sparc.h (IEEE_FLOAT): For all ports that #define
        IEEE_FLOAT, make sure they give it the value (1).

        Provide the hooks needed to support architectures on which
        pointers are not always simple byte addresses.

        * gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new
        functions which architectures can redefine, defaulting to
        generic_pointer_to_address and generic_address_to_pointer.
        * findvar.c (extract_typed_address, store_typed_address,
        generic_pointer_to_address, generic_address_to_pointer): New
        functions.
        (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
        definitions.
        (extract_address, store_address): Doc fixes.
        * values.c (value_as_pointer): Doc fix.
        (value_from_pointer): New function.
        * defs.h (extract_typed_address, store_typed_address): New
        declarations.
        * inferior.h (generic_address_to_pointer,
        generic_pointer_to_address): New declarations.
        * value.h (value_from_pointer): New declaration.
        
        The following changes are all of the general form "Use these
        functions instead of these other functions."  In each case, the
        change is because the new calls provide enough information to do
        the appropriate address / pointer conversions, where the old calls
        did not, or because the new functions are more appropriately named
        for the operation being performed.
        
        * ax-gdb.c (const_var_ref): Use value_from_pointer, not
        value_from_longest.
        * blockframe.c (generic_push_dummy_frame): Use read_pc and
        read_sp, not read_register.
        * c-valprint.c (c_val_print): Use extract_typed_address instead of
        extract_address to extract vtable entries and references.
        * cp-valprint.c (cp_print_value_fields): Use value_from_pointer
        instead of value_from_longest to extract the vtable's address.
        * eval.c (evaluate_subexp_standard): Use value_from_pointer
        instead of value_from_longest to compute `this', and for doing
        pointer-to-member dereferencing.
        * findvar.c (read_register): Use extract_unsigned_integer, not
        extract_address.
        (read_var_value): Use store_typed_address instead of store_address
        for building label values.
        (locate_var_value): Use value_from_pointer instead of
        value_from_longest.
        * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
        instead of value_from_longest, to build arguments to __d_shl_get.
        * printcmd.c (set_next_address): Use value_from_pointer, not
        value_from_longest.
        (x_command): Use value_from_pointer, not value_from_longest.
        * tracepoint.c (set_traceframe_context): Use value_from_pointer,
        not value_from_longest.
        * valarith.c (value_add, value_sub): Use value_from_pointer, not
        value_from_longest.
        * valops.c (find_function_in_inferior, value_coerce_array,
        value_coerce_function, value_addr, hand_function_call): Same.
        * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. 
        * values.c (unpack_long): Use extract_typed_address to produce
        addresses from pointers and references, not extract_address.
        (value_from_longest): Use store_typed_address instead of
        store_address to produce pointer and reference values.

2000-04-13  Mark Kettenis  <kettenis@gnu.org>

        * acconfig.h (HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T,
        HAVE_PSADDR_T): Add them here instead of in config.in.

        * acconfig.h (PRFPREGSET_T_BROKEN): New define.
        * configure.in: Add check for broken prfpregset_t type.
        * lin-thread.c (gdb_prfpregset): New typedef, depends on
        definition of PRFPREGSET_T_BROKEN.
        (ps_lgetfpregs, ps_lsetfpregs, p_td_thr_getfpregs,
        p_td_thr_setfpregs, thread_db_fetch_registers,
        thread_db_store_registers): Use gdb_prfpregset_t instead of
        prfpregset_t.
        * config.in: Regenerated.
        * configure: Regenerated.

2000-04-13  DJ Delorie  <dj@cygnus.com>

        * mips-tdep.c (do_fp_register_row): copy the number of bytes
        allocated, not the size of the pointer.

2000-04-13  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>

        * config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS):  Define.
        * config/i386/tm-i386sol2.h (HAVE_I387_REGS):  Define.
        * i386v4-nat.c (supply_fpregset, fill_fpregset):  Add code
        to handle floating point registers if NUM_FREGS is not zero.

2000-04-13  Nick Duffek  <nsd@cygnus.com>

        * sol-thread.c (init_sol_core_ops): Initialize to_thread_alive
        and document to_find_new_threads bug.

2000-04-13  Eli Zaretskii  <eliz@is.elta.co.il>

        * infrun.c (proceed, normal_stop): Change the error message about
        failure to insert breakpoints/watchpoints so that it makes sense
        even if ptrace is not used or no other processes can be active.

Thu Apr 13 13:24:27 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in: Add --enable-maintainer-mode.
        * aclocal.m4, configure: Re-generate.

        * Makefile.in ($(srcdir)/copying.c): Enable dependencies only when
        on maintainer-mode.  Update copying.c in source directory.
        (copying.txt): Delete rule.
        (copying.o): Add explict paths to $(srcdir) and explicit make
        rule.

2000-04-12  Kevin Buettner  <kevinb@redhat.com>

        * ia64-linux-nat.c (IA64_PSR_DB, IA64_PSR_DD): Define.
        (fetch_debug_register, fetch_debug_register_pair,
        store_debug_register, store_debug_register_pair, is_power_of_2,
        enable_watchpoints_in_psr, ia64_linux_insert_watchpoint,
        ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
        New functions.
        * config/ia64/nm-linux.h (TARGET_HAS_HARDWARE_WATCHPOINTS,
        TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_STEPPABLE_WATCHPOINT,
        STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
        target_remove_watchpoint): Define.
        (ia64_linux_stopped_by_watchpoint, ia64_linux_insert_watchpoint,
        ia64_linux_remove_watchpoint): Declare.

2000-04-12  Eli Zaretskii  <eliz@is.elta.co.il>

        * go32-nat.c (go32_insert_hw_breakpoint): When there are no more
        hardware breakpoint resources, return EBUSY.
        (go32_handle_nonaligned_watchpoint): If the argument WHAT is not
        one of the enumerated values, return EINVAL.

2000-04-12  Eli Zaretskii  <eliz@is.elta.co.il>

        * README: Mention special build instructions for DJGPP.
        * NEWS: Update with FP features on x87 platforms, and
        DJGPP-related changes.

2000-04-12  Eli Zaretskii  <eliz@is.elta.co.il>

        * top.c (gdb_completer_file_name_break_characters): New variable.
        (line_completion_function): When completing on file names, use
        gdb_completer_file_name_break_characters as word break
        characters for the readline library.

2000-04-12  Mark Kettenis  <kettenis@gnu.org>

        * i387-tdep.c (print_i387_value): Avoid call to
        floatformat_to_doublest if long double type is the same on host
        and target.

2000-04-11  Fernando Nasser  <fnasser@cygnus.com>

        * wrapper.h: Remove definitions of internal functions.
        * wrapper.c: Remove definitions of exported functions (which are
        already in wrapper.h) and make static all internal wrap_* functions.

Mon Apr 10 21:58:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * acconfig.h (USE_INCLUDED_REGEX): Add.
        * Makefile.in (REGEX_CFLAGS): Delete
        * configure.in (REGEX_CFLAGS): Delete. Use AC_DEFINE instead.
        * configure, config.in: Re-generate.

2000-04-10  Philip Blundell <philb@gnu.org>

        * arm-linux-nat.c (arm_skip_solib_resolver): Remove and move to
        arm-linux-tdep.c.
        * arm-linux-tdep.c (arm_skip_solib_resolver): New.

2000-04-10  Fernando Nasser  <fnasser@cygnus.com>

        From 2000-04-10 Rodney Brown <rdb@redhat.com>:
        * command.h (enum command_class): Remove trailing "," to placate
        AIX xlc.

Mon Apr 10 20:17:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO, NEWS: Update.  Mention MI.

Mon Apr 10 00:21:09 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch-utils.h, gdbarch-utils.c: Delete.
        * arch-utils.h, arch-utils.c: New files.  Avoid 14 character file
        name problems.
        * Makefile.in: Update.
        * gdbarch.c: Update.

Sun Apr  9 23:42:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-04-07 Jonathan Larmour <jlarmour@redhat.co.uk>:
        * mips-tdep.c (saved_gpreg_size_enums): Define enum command for
        new "set mips saved-gpreg-size" command
        (MIPS_SAVED_REGSIZE): Now a function mips_saved_regsize()
        (MIPS_DEFAULT_SAVED_REGSIZE): Define for default MIPS_SAVED_REGSIZE,
        either from target, or gdb multi-arch
        (show_mips_command): New. For "show mips" prefix command
        (set_mips_command): New. For "show mips" prefix command
        (_initialize_mips_tdep): Add top-level mips prefix command
        Add "set mips saved-gpreg-size" command

        * mips-tdep.c (struct gdbarch_tdep): Rename mips_saved_regsize to
        mips_default_saved_regsize.
        (mips_gdbarch_init): Update.
        (MIPS_DEFAULT_SAVED_REGSIZE): Update.
        (mips_gdbarch_init): Use MIPS_REGSIZE as the default value for
        mips_default_saved_regsize.

Sun Apr  9 23:27:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-04-07 J.T. Conklin <jtc@redback.com>:
        * lynx-nat.c (fetch_inferior_registers, store_inferior_registers):
        replace calls to target_xfer_memory() with target_read_memory()
        and target_write_memory().

Sun Apr  9 22:54:29 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * valops.c (value_rtti_type): Compare VALUE_ADDRESS with ``0'' not
        NULL. Macro returns a CORE_ADDR.

2000-04-08  Jim Blandy  <jimb@redhat.com>

        * dwarf2read.c: Revert Andrew Cagney's change of Dec 15, 1997.
        Don't include "bfd-elf.h".
        (address_significant_size): Delete variable.
        (dwarf2_build_psymtabs_hard): Don't set it, or check for
        consistency between it and the Dwarf 2 compilation unit header
        address size.
        (read_address): Don't mask off bits above
        address_significant_size.
        * Makefile.in (dwarf2read.o): Don't depend on $(elf_bfd_h).
        (elf_bfd_h): Remove variable; it's no longer used.

2000-04-08  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>

        * configure.in (NEW_PROC_API):  Escape square brackets when testing
        for solaris2.[678].
        * configure:  Regenerate.

2000-04-07  Scott Bambrough <scottb@netwinder.org>

        * ChangeLog: Correct date on last entry.
        * arm-linux-tdep.c (arm_linux_push_arguments): New function.
        * config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.  
        * config/arm/tm-embed: Fix build warning from redefinition of
        LOWEST_PC.
        * config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
        * config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and 
        TARGET_BYTE_ORDER.  Add TARGET_BYTE_ORDER_SELECTABLE_P to 
        override default in tm-arm.h.  Use default target byte order
        from tm-arm.h.

2000-04-07  Scott Bambrough <scottb@netwinder.org>

        * Makefile.in: Add dependency information for arm-linux-tdep.c.
        * config/djgpp/fnchange.lst: Add arm-linux-tdep.c, arm-linux-nat.c.

2000-04-07  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>

        * sol-thread.c (gdb_ps_addr_t):  New typedef, depends on definition
        of PROC_SERVICE_IS_OLD.
        (ps_pglobal_lookup, ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite,
        rw_common):  Change argument type from psaddr_t to gdb_ps_addr_t.

Fri Apr  7 17:18:42 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (CFLAGS): Set using configure.

        * configure.in (WARN_CFLAGS): Enable by default when GCC.
        * configure: Re-generate.

Fri Apr  7 13:33:43 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-03-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
        * procfs.c (init_procfs_ops):  Set procfs_ops.to_has_memory and
        procfs_ops.to_has_all_memory to 1.

        * TODO: Update

2000-04-06  Nick Duffek  <nsd@cygnus.com>

        * configure.in (_MSE_INT_H): Define on Solaris 7.
        (NEW_PROC_API): Define on Solaris 7 and 8 as well as 6.
        * acconfig.h (_MSE_INT_H): Define on Solaris 7.
        * configure: Regenerate.
        * config.in: Regenerate.

2000-04-06  Michael Snyder  <msnyder@cygnus.com>

        * sol-thread.c (GET_LWP, GET_THREAD, BUILD_LWP, BUILD_THREAD):
        Change to rely on PIDGET etc.
        * config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS, 
        TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
        STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
        define.  Allow target to use procfs hardware watchpoints.
        * config/sparc/nm-sun4sol2.h: ditto.
        * config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
        definitions to use 16 bits for the pid, 15 bits for the tid, and
        1 bit for the flag.
        * config/sparc/tm-sun4sol2.h: ditto.
        (SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
        * testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
        for more than 15 thread increments.

2000-04-06  Eli Zaretskii  <eliz@is.elta.co.il>

        * top.c (filename_completer): Set subsequent_name to 1 early on,
        to prevent an infinite loop if the first file in the directory is
        a backup file (whose name ends in a `~').

2000-04-05  Jim Blandy  <jimb@redhat.com>

        * solib.c (update_solib_list): New function.
        (solib_add): Call update_solib_list, and then read symbols.
        (info_sharedlibrary_command): Call update_solib_list, not
        solib_add.

2000-04-05  Scott Bambrough <scottb@netwinder.org>

        * arm-linux-tdep.c: Resolve implicit function declarations by 
        including target.h and value.h.  Inclusion of symtab.h is
        no longer needed.

2000-04-05  Scott Bambrough <scottb@netwinder.org>

        * arm-linux-tdep.c: New file.
        * arm-linux-nat.c (fetch_fpregs): Remove unused code.
        (arm_get_longjmp_target): Moved it and all defines 
        it uses to arm-linux-tdep.c.
        (arm_linux_extract_return_value): Moved to
        arm-linux-tdep.c.
        * config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.

2000-04-04  Nick Duffek  <nsd@cygnus.com>

        * infrun.c (handle_inferior_event): Call target_mourn_inferior
        instead of kill_target.

2000-04-04  Daniel Berlin  <dan@cgsoftware.com>

        * TODO: Make note of various C++ things i have planned for 5.1.

Tue Apr  4 12:13:19 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * printcmd.c (print_scalar_formatted): Use local variable ptr_bit
        in shift.  Stop GCC thinking it has a shift overflow.

2000-04-03  H.J. Lu  <hjl@gnu.org>

        * TODO: Remove the regex entry.

2000-04-03  H.J. Lu  <hjl@gnu.org>

        * gdb_regex.h: New. Include "regex.h" if USE_INCLUDED_REGEX
        is defined and <regex.h> otherwise.

        * irix5-nat.c: Include "gdb_regex.h" instead of "gnu-regex.h".
        * monitor.c: Likewise.
        * osfsolib.c: Likewise.
        * solib.c: Likewise.
        * source.c: Likewise.
        * symtab.c: Likewise.

        * Makefile.in (REGEX): Changed to @REGEX@.
        (REGEX_CFLAGS): New.
        (REGEX1): Removed.
        (ADD_DEPS): Use $(REGEX) instead of $(REGEX1).
        (INTERNAL_WARN_CFLAGS): Add $(REGEX_CFLAGS).

        * configure.in (--with-included-regex): New switch.
        (REGEX): New. Subsstitue @REGEX@ in Makefile.in.
        (REGEX_CFLAGS): New. Subsstitue @REGEX_CFLAGS@ in Makefile.in.
        * configure: Regenerated.

2000-04-03  Kevin Buettner  <kevinb@redhat.com>

        * NEWS (powerpc-*-linux*): Mention.

2000-04-03  J.T. Conklin  <jtc@redback.com>

        * config/i386/xm-nbsd.h (HOST_LONG_DOUBLE_FORMAT): Define.

2000-04-03  Kevin Buettner  <kevinb@redhat.com>

        * Makefile.in (ALLDEPFILES): Add ia64-linux-nat.c and ia64-tdep.c.
        (ia64-linux-nat.o, ia64-tdep.o): Add dependencies.

        * ia64-linux-nat.c (fill_gregset): Implement.
        (supply_fpregset, fill_fpregset): New functions.

        * ia64-tdep.c (ia64_init_extra_frame_info): Revise manner in
        which the CFM is fetched for certain frames.
        (find_global_pointer, find_extant_func_descr): Don't use
        partial symtabs for locating sections.

        * config/ia64/linux.mh (LOADLIBES): Define.
        (NATDEPFILES): Add linux-thread.o and lin-thread.o.
        * config/ia64/nm-linux.h (nm-linux.h): Include this upper-level
        file containing generic linux declarations/definitions.
        (SVR4_SHARED_LIBS, ATTACH_DETACH): Remove defines; already
        defined in generic nm-linux.h.
        (solib.h): Remove include; already included in generic nm-linux.h.

2000-04-03  Jim Blandy  <jimb@redhat.com>

        * solib.c (solib_add): Move all the code for loading symbol tables
        below the code to sort out additions and removals.  That way, we
        always catch all loaded shared libraries whose symbols we haven't
        grabbed yet.

        * solib.c (solib_add): Don't try to free a shared object's objfile
        if it doesn't have one.  Duh.

        * solib.c (solib_add): If a pattern was given, but it doesn't
        match any currently loaded shared libraries, print a message;
        don't just be silent.

2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>

        * go32-nat.c (go32_handle_nonaligned_watchpoint): Use a
        two-dimensional array instead of faking it with index
        arithmetics.

2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>

        * config/i386/xm-go32.h (HOST_LONG_DOUBLE_FORMAT): Define.

        * config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
        definition (and use the common one in tm-i386.h).
        (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
        (I386_DJGPP_TARGET): Don't define, it's no longer required.
        (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
        i386-tdep.c defines it for all x86 targets.
        (LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.

        * config/djgpp/fnchange.lst: Add i386-linux-tdep.c.

        * config/djgpp/djcheck.sh: Edit the copyright year out of the test
        results.  Fix editing of `main' arguments for non-GNU Sed.

2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>

        * symfile.c (map_overlay_command, unmap_overlay_command): Fix
        error message: there's no "overlay on" command.

2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>

        * Makefile.in (copying.c): Depend on copying.txt, not COPYING.
        (copying.txt): New target, a link to COPYING.

Mon Apr  3 18:20:03 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Update.
        
Mon Apr  3 14:56:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * top.c: Re-indent.
        (set_hook, error_hook): Remove PARAMS.

Mon Apr  3 14:45:25 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * symtab.h (add_minsym_to_demangled_hash_table): Revert 2000-03-29
        Daniel Berlin <dan@cgsoftware.com>.  Function was static.
        * minsyms.c (add_minsym_to_demangled_hash_table): Add prototype.

Mon Apr  3 14:10:37 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdb-events.h, gdb-events.c, gdb-events.sh: Re-indent.

2000-04-02  Nick Duffek  <nsd@cygnus.com>

        * gdbtypes.c (safe_parse_type): New wrapper function to ignore
        error() during parse_and_eval_type().
        (check_stub_method): Call safe_parse_type instead of
        parse_and_eval_type().
        * wrapper.c (gdb_parse_and_eval_type): New wrapper function.
        (wrap_parse_and_eval_type): New support function.
        * wrapper.h (gdb_parse_and_eval_type): Prototype.
        (wrap_parse_and_eval_type): Prototype.

Sun Apr  2 10:32:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Eli Zaretskii is a doco maintainer.

Fri Mar 31 08:59:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch-utils.h, gdbarch-utils.c: New files.
        * Makefile.in (SFILES, COMMON_OBS): Update.
        (gdbarch_utils_h) Define.
        (gdbarch-utils.o): Add dependencies.
        
        * gdbarch.c, gdbarch.sh: Include "gdbarch-utils.h". Fix code
        handling default method values.
        (startup_gdbarch): Rename default_gdbarch, name misleading.
        (breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
        (register_name): Default to legacy_register_name.
        (call_dummy_words): Default to legacy_call_dummy_words.
        (sizeof_call_dummy_words): Default to
        legacy_sizeof_call_dummy_words.
        (register_convertible): Default to
        generic_register_convertible_not.
        (breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
        (remote_translate_xfer_address): Default to
        generic_remote_translate_xfer_address.
        (frameless_function_invocation): Default to
        generic_frameless_function_invocation_not.

2000-04-02  Mark Kettenis  <kettenis@gnu.org>

        * i386-linux-nat.c: Add copyright notice.

        * config/i386/xm-linux.h (HOST_LONG_DOUBLE_FORMAT): Define as
        &floatformat_i387_ext.
        * config/i386/xm-i386gnu.h (HOST_LONG_DOUBLE_FORMAT): Likewise.

2000-03-29  Mark Kettenis  <kettenis@gnu.org>

        * findvar.c (extract_floating): Remove reference to
        TARGET_EXTRACT_FLOATING.
        (store_floating): Remove reference to TARGET_STORE_FLOATING.

2000-03-30  Fernando Nasser  <fnasser@cygnus.com>

        * wrapper.c (gdb_value_subscript, wrap_value_subscript): New functions.
        Safe version of value_subscript.
        * varobj.c (): Use gdb_value_subscript() to get an array element value.

2000-03-30  Michael Snyder  <msnyder@cygnus.com>

        * ui-file.c: Include "gdb_string.h"
        * cli-out.c: Include gdb_string.h to avoid compiler warnings.
        * wrapper.[ch] (struct gdb_wrapper_arguments): Change fields into 
        unions, since they are all used to hold both pointers and ints
        at various times.  Casting pointer to int and vice versa gives
        warnings (and is not safe) if they are not the same size.
        
2000-03-30  Michael Snyder  <msnyder@cygnus.com>

        * defs.h (struct continuation_arg): Make 'data' a union, to avoid
        casting problems when int and pointer are not the  same size.
        * event-top.c (command_handler): Use data as a union.
        (command_line_handler_continuation): Ditto.
        * infcmd.c (step_1_continuation): Use data as a union.  Re-indent.
        (step_once): ditto.  (finish_command_continuation): Ditto.
        (finish_command): Ditto.  
        * breakpoint.c (until_break_command): Use data as a union.
        (until_break_command_continuation): Ditto.
        * utils.c (add_intermediate_continuation): Fix typo in comment.

Thu Mar 30 12:09:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.h, gdbarch.c: Re-indent.  Remove FIXMEs.
        * gdbarch.sh: Re-sync with gdbarch.[hc].

2000-03-29  Daniel Berlin  <dan@cgsoftware.com>

        * minsyms.c (add_minsym_to_demangled_hash_table): New function.
        (install_minimal_symbols): Fix demangled symbol problems caused by
        using add_minsym_to_hash_table for the demangled names, which is
        wrong. Now we use add_minsym_to_demangled_hash_table.
        (lookup_minimal_symbol): Fix problems with demangled symbol lookup
        caused by weird control flow.
        * symtab.h: Add add_minsym_to_demangled_hash_table prototype here.

2000-03-29  Jason Merrill  <jason@casey.cygnus.com>

        * configure.in: -linux-gnu*, not -linux-gnu.

Tue Mar 28 18:28:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * remote.c (remote_threads_extra_info): Replace qfThreadExtraInfo
        with qThreadExtraInfo.

2000-03-29  J.T. Conklin  <jtc@redback.com> 
 
        * i386nbsd-nat.c (fetch_core_registers): Make static. 
 
        * m68knbsd-nat.c (fetch_core_registers): Make static. 
        (m68knbsd_core_fns, _initialize_m68knbsd_nat): Added. 
 
Wed Mar 29 13:40:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Update GDB 5 status.

Wed Mar 29 10:16:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * breakpoint.h (remove_hw_watchpoints): Add declaration.
        * breakpoints.c (remove_hw_watchpoints): Update.
        * maint.c (maintenance_do_deprecate): Avoid assignment within IF
        condition.

2000-03-28  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>

        breakpoint.c, breakpoint.h (remove_hw_watchpoints):  New function.
        infrun.c (resume):  Remove hardware watchpoints before stepping
        when CANNOT_STEP_HW_WATCHPOINTS is nonzero.

2000-03-28  Michael Snyder  <msnyder@cygnus.com>

        * Makefile.in: Anchor tui-file.h dependency to $srcdir.

2000-03-28  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>

        * procfs.c (proc_set_watchpoint):  Declare addr parameter as
        CORE_ADDR, to match call from procfs_set_watchpoint.

        * breakpoint.c (insert_breakpoints, do_enable_breakpoint):  
        Reselect the saved frame silently after frame selection for 
        watchpoint evaluation.
        (insert_breakpoints):  Add missing space in `Hardware watchpoint
        deleted' message.  Do not reinsert hardware watchpoint if it is
        already marked for deletion at next stop.

2000-03-28  Christopher Faylor  <cgf@cygnus.com>

        * partial-stab.h: Add one more check against corrupted or irregular
        stabs entry.

Tue Mar 28 12:23:37 2000  Philippe De Muyter  <phdm@macqel.be>

        * gnu-regex.c (regerror): Function renamed from `__regerror'.
        (Change also approved in the mainline glibc sources)

Tue Mar 28 18:19:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-03-20 Jonathan Larmour <jlarmour@redhat.co.uk>:
        * ser-unix.c (do_unix_readchar): Reorganise to be more robust,
        particularly ensuring it can't return SERIAL_TIMEOUT when told
        not to time out.

2000-03-24  Daniel Berlin  <dan@cgsoftware.com>

        * gdbtypes.c (_initialize_gdbtypes): Add "set debug overload",
        which never existed before, and thus, has no deprecated old command.

        * gdbarch.c (_initialize_gdbarch): Add "set debug arch", deprecate
        "set archdebug" (same goes for the show commands).
        * gdb-events.c (_initialize_gdb_events): Add "set debug event",
        deprecate "set eventdebug" (same goes for the show commands).
        * gdbcmd.h: Add the setdebuglist and showdebuglist externs.
        * top.c (init_main): Deprecate remotedebug, use "set/show debug remote"
        instead.
        x(init_main): Add the "set debug" and "show debug" commands.
        Add setdebuglist and showdebuglist.

Fri Mar 24 13:00:10 2000  Daniel Berlin <dan@cgsoftware.com>

        * maint.c (maintenance_do_deprecate): Fix crash if you call with no arguments, and fixed the warning.
          Added prototype for the deprecate command so it doesn't complain.

Tue Mar 28 11:52:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * top.c (print_gdb_version): Bump copyright year to 2000.

Tue Mar 28 10:13:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Add Glen McCready to write after approval list.

Tue Mar 28 09:59:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * acconfig.h: Fix typo in comment describing HAVE_PTRACE_GETREGS.
        * config.h: Regenerate.
        
Mon Mar 27 19:53:29 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * TODO: Update.  Add criteria for next release of GDB.

Mon Mar 27 17:20:25 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * acconfig.h: Provide default for HAVE_PTRACE_GETREGS.
        * config.h: Regenerate.

Mon Mar 27 16:43:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (install-only): Create $(bindir) and $(man1dir)
        before installing GDB.

Mon Mar 27 16:26:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (all-gdbtk): Check for an existing link/directory.
        Re-format warning message.  Document that post 5.0 this can be
        deleted.

Mon Mar 27 14:46:37 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * ChangeLog: Revert whitespace changes.

Mon Mar 27 10:20:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Update folks who need accounts.

Mon Mar 27 09:29:14 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: J.T. Conklin is NetBSD maintainer.

2000-03-27  Mark Kettenis  <kettenis@gnu.org>

        * config/i386/tm-i386.h: Fix typo.  It is TARGET_LONG_DOUBLE_BIT
        instead of TARGET_LONG_DOUBLE_BITS.
        * config/i386/tm-i386mk.h: Likewise.

2000-03-26  Mark Kettenis  <kettenis@gnu.org>

        Provide `long double' support for most i386 targets.
        * config/i386/tm-i386.h (TARGET_LONG_DOUBLE_FORMAT): Define as
        &floatformat_i387_ext.
        (TARGET_LONG_DOUBLE_BITS): Define as 96.
        (REGISTER_VIRTUAL_TYPE): Change type for FPU registers to
        `builtin_type_long_double'.
        (REGISTER_CONVERT_TO_VIRTUAL): Call
        i386_register_convert_to_virtual.
        (REGISTER_CONVERT_TO_RAW): Call i386_register_convert_to_raw.
        (i387_to_double, double_to_i387): Remove prototypes.
        (i386_extract_return_value): Change prototype to match definition
        in i386-tdep.c.
        * config/i386/tm-i386mk.h (TARGET_LONG_DOUBLE_FORMAT): #undef.
        (TARGET_LONG_DOUBLE_BITS): #undef.
        * config/i386/tm-linux.h (TARGET_LONG_DOUBLE_BIT): Remove.
        [HAVE_LONG_DOUBLE && HOST_I386] (LD_I387): Remove.
        (i387_extract_floating, i387_store_floating): Remove prototypes.
        (TARGET_EXTRACT_FLOATING, TARGET_STORE_FLOATING): Remove.
        (REGISTER_CONVERT_TO_VIRTUAL, REGOISTER_CONVERT_TO_RAW): Remove.
        (REGISTER_VIRTUAL_TYPE): Remove.
        * i386-tdep.c (i386_register_convert_to_virtual): New function.
        (i386_register_convert_to_raw): New function.
        * i387-tdep.c [LD_I387] (i387_extract_floating): Remove.
        (i387_store_floating): Remove.

Sat Mar 25 18:55:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * maint.c: Re-indent.

Sat Mar 25 18:51:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * maint.c (_initialize_maint_cmds): Remove quoted trailing space.

2000-03-24  Christopher Faylor  <cgf@cygnus.com>

        * config/mips/tm-wince.h: Fix typo which caused include of tm-mips.h to
        be inoperative.

2000-03-24  Christopher Faylor  <cgf@cygnus.com>

        * win32-nat.c: Back out special frame walking code.  It was broken.
        (handle_exception): Correctly identify an illegal instruction.
        * config/tm-cygwin.h: Eliminate special frame handling.  Just use
        normal i386 handling.

2000-03-24  J.T. Conklin  <jtc@redback.com> 
 
        * i386/tm-nbsd.h (USE_STRUCT_CONVENTION): Define. 
        * i386nbsd-nat.c (i386nbsd_use_struct_convention): New function. 
        (fetch_core_registers): Read fp registers. 
        (i386nbsd_core_fns, _initialize_i386nbsd_nat): Added. 
 
2000-03-24  Jonathan Larmour  <jlarmour@redhat.co.uk>

        * arm-tdep.c (thumb_skip_prologue): Take function end addr argument
        so that we can stop searching for the prologue past the function end
        (arm_skip_prologue): Call thumb_skip_prologue with function end addr

2000-03-24  Kevin Buettner  <kevinb@redhat.com>

        * linux-thread.c, lin-thread.c (save_inferior_pid,
        restore_inferior_pid): Don't do compile time comparison
        of TARGET_PTR_BIT and TARGET_INT_BIT.

Thu Mar 23 13:18:26 2000  Philippe De Muyter  <phdm@macqel.be>

        * m68k-tdep.c (P_LINKL_FP, P_LINKW_FP): Macros renamed from P_LINK_L
        and P_LINK_W.
        (P_PEA_FP, P_MOVL_SP_FP): New macros.
        (P_MOVL, P_LEAL, P_MOVML): Macros renamed from P_MOV_L, P_LEA_L and
        P_MOVM_L.
        (altos_skip_prologue, isi_skip_prologue): Use P_* macros, not octal
        constants.
        (delta68_in_sigtramp): New function.
        (delta68_frame_args_address, delta68_frame_saved_pc): Ditto.
        (m68k_skip_prologue): Use P_* macros, not hex constants.
        (m68k_find_saved_regs): Do not expect a fixed sequence of register save
        instructions, but accept them in any order; use P_* macros, not octal
        or hex constants; recognize also `fmovemx to (fp + displacement)' and
        `moveml to (fp + displacement)'.
        * m68/tm-delta68.h (IN_SIGTRAMP): New macro.
        (FRAME_SAVED_PC, FRAME_ARGS_ADDRESS): Ditto.
        
Fri Mar 24 13:44:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Add Fernando Nasser to testsuite maintainers. 
        
2000-03-23  Michael Snyder  <msnyder@cygnus.com>

        * solib.c (open_symbol_file_object): To sneak an int argument
        past catch_errors, instead of casting it to a pointer, simply
        pass it by address.

2000-03-23  Jimmy Guo   <guo@cup.hp.com>

        * gdbtypes.c (rank_function): Rank all N parameters and use correct
        index into the prams[] and args[] arrays.

2000-03-23  Fernando Nasser  <fnasser@cygnus.com>

        From David Whedon <dwhedon@gordian.com>

        * top.c (execute_command): Checks all commands beore executing
        to see if the user needs to be warned that the command is
        deprecated, warns user if appropriate.
        (add_info), (add_info_alias), (add_com) , (add_com_alias): Changed
        return values from void to struct cmd_list_element *.
        * command.c (lookup_cmd_1): Check aliases before following link 
        in case user needs to be warned about a deprecated alias.
        (deprecate_cmd): new exported function for command deprecation,
        sets flags and posibly a replacement string.
        (deprecated_cmd_warning): New exported funciton to warn user about
        a deprecated command. 
        (lookup_cmd_composition): New exported function that determines
        alias, prefix_command, and cmd based on a string.  This is useful
        is we want to full name of a command.
        * command.h : Added prototypes for deprecate_cmd,
        deprecated_warn_user and lookup_cmd_composition, added flags to
        the cmd_list_element structure, changed return values for
        add_com_* and add_info_* from void to cmd_list_element.
        * maint.c : (maintenance_deprecate): New function to deprecate a
        command.  This exists only so that the testsuite can deprecate
        commands at runtime and check the warning behavior.
        (maintenance_undeprecate) : New function, drops deprecated flags.
        (maintenance_do_deprecate): Actually does the (un)deprecation.
        (initialize_maint_cmds): Added the above new deprecate commands.

2000-03-22  Daniel Berlin  <dan@cgsoftware.com>
        * command.c (apropos_cmd_helper): New function, meat of the
        apropos command.
        (apropos_command): New apropos command to search command
        names/documentation for regular expressions.
        (_initialize_command): Add the apropos command.

2000-03-23  Michael Snyder  <msnyder@cygnus.com>

        * sol-thread.c (ps_pglobal_lookup): Change argument type from
        paddr_t to psaddr_t.  This mistake appears to date from an
        erroneous man page in Solaris 2.5 -- the correct type from the
        system headers has always been psaddr_t.
        (ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite): Ditto.
        (rw_common): Ditto.

2000-03-22  Kevin Buettner  <kevinb@redhat.com>

        * ia64-linux-nat.c: Fix copyright.
        (fill_gregset): Minor formatting fix.
        * ia64-tdep.c (template_encoding_table, fetch_instruction,
        examine_prologue): Clean up some compiler warnings.
        (is_float_or_hfa_type_recurse, is_float_or_hfa_type, find_func_descr,
        find_global_pointer, find_extant_func_descr): New functions.
        (ia64_use_struct_convention, ia64_extract_return_value,
        ia64_push_arguments): Handle HFAs.
        (ia64_push_arguments): Find (or build) a function descriptor
        when given a function address.
        (ia64_push_return_address): Moved code for finding the
        global pointer into its own function, find_global_pointer ().

2000-03-22  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * event-loop.c (handle_file_event): Run through indent.

2000-03-22  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        From  Philippe De Muyter  <phdm@macqel.be>

        * event-loop.c (sys/types.h): File now included unconditionally.
        (use_poll): New variable..
        (gdb_notifier): poll- and select-versions merged.
        (add_file_handler): If HAVE_POLL, check whether poll is usable,
        and reset `use_poll' if not.
        (create_file_handler): Select poll- or select-version according to
        `use_poll'.
        (delete_file_handler, handle_file_event): Likewise.
        (gdb_wait_for_event, poll_timers): Likewise.

2000-03-22  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>

        * printcmd.c (print_scalar_formatted):  Truncate addresses to the
        size of a target pointer before passing them to print_address.

2000-03-22  Mark Kettenis  <kettenis@gnu.org>

        * config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
        * config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
        Remove
        * i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
        (i386_extract_return_value): Rewritten.  Correctly support all
        floating-point types and large integer types on targets that use
        the standard i386 GDB register layout and return floating-point
        values in the FPU.

Wed Mar 22 15:09:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (CONFIG_INITS): Do not append remote-nrom.c

2000-03-21  J.T. Conklin  <jtc@redback.com> 
 
        * i386/nbsd.mh (NATDEPFILES): Change i386b-nat.o to i386nbsd-nat.o. 
        * i386nbsd-nat.c: New file. 
 
        * i386/tm-nbsd.h (NUM_REGS): Removed. 
        (HAVE_I387_REGS): Defined. 
        * i386/nm-nbsd.h (FLOAT_INFO): Removed. 
 
        * tm-nbsd.h (IN_SOLIB_CALL_TRAMPOLINE): Define if not 
        SVR4_SHARED_LIBS. 

Wed Mar 22 11:18:59 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Add Jim Blandy to breakpoint maintainers.  David
        taylor is the Solaris/SPARC maintainer.  Add Jonathan Larmour to
        the write after approval list.

2000-03-21  Kevin Buettner  <kevinb@redhat.com>

        * symtab.h (MAX_SECTIONS, struct section_addr_info,
        symbol_file_add):  Move declarations from here...
        * symfile.h: ...to here.

        * solib.c (symbol_add_stub): Make symbol_file_add () aware of
        all section addresses, not just .text.
        * symfile.h, symfile.c (free_section_addr_info,
        build_section_addr_info_from_section_table): New functions.

        * symfile.h (MAX_SECTIONS): Increase value to 40.
        * symfile.c (syms_from_objfile): Add bounds check prior to
        accessing ``other'' array in a section_addr_info_struct.
        Remove unused variable section_offsets.
        (add_symbol_file_command): Remove unused variable text_addr.

2000-03-21  Eli Zaretskii  <eliz@is.elta.co.il>

        * breakpoint.c (bpstat_stop_status): Don't stop if a read
        watchpoint appears to break, but the watched value changed.

2000-03-21  Jim Blandy  <jimb@redhat.com>

        * gdbarch.sh: Emit a definition and declaration for gdbarch_free,
        a companion to gdbarch_alloc, which allows a gdbarch init function
        to free partially-built gdbarch structures.
        * gdbarch.c, gdbarch.h: Regenerated.

2000-03-20  Kevin Buettner  <kevinb@redhat.com>

        * configure.host, configure.tgt (ia64-*-linux*): New entry.

        * gdbserver/low-linux.c (u_offsets, ia64_register_u_addr,
        initialize_arch): Define for IA-64.
        (initialize_arch): Add declaration.

2000-03-20  Eli Zaretskii  <eliz@is.elta.co.il>

        * breakpoint.c (insert_breakpoints, remove_breakpoint)
        (bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
        remove, or check status of hardware watchpoints for entire structs
        and arrays unless the user explicitly asked to watch that struct
        or array.  
        (insert_breakpoints): Try to insert watchpoints for all the values
        on the value chain, even if some of them fail to insert.

        * values.c (value_primitive_field): Set the offset in struct value
        we return when the field is a packed bitfield.

2000-03-20  Michael Snyder  <msnyder@cygnus.com>

        * remote.c (remote_threads_extra_info): New function.
        Implement the extra thread info query for "info threads".
        (remote_threads_info): Clean up a bit.
        (use_threadinfo_query, use_threadextra_query): New variables.
        Control whether GDB will use the new or old protocol for 
        thread info queries.
        (remote_open_1): Initialize new variables.
        (remote_async_open_1): Ditto.
        (remote_cisco_open): Ditto.

2000-03-20  Kevin Buettner  <kevinb@redhat.com>

        * ia64-linux-nat.c, ia64-tdep.c, config/ia64/linux.mh,
        config/ia64/linux.mt, config/ia64/nm-linux.h, config/ia64/tm-ia64.h,
        config/ia64/tm-linux.h, config/ia64/xm-linux.h: New files.

2000-03-20  Kevin Buettner  <kevinb@redhat.com>

        * utils.c (floatformat_from_doublest): Don't assume that a long
        will be exactly 32 bits in length.  Also...  make sure space
        that we're writing the float to is completely initialized to
        zeroes, even when the number of bits in the float is not
        evenly divisible by FLOATFORMAT_CHAR_BIT.

2000-03-20  Jim Blandy  <jimb@redhat.com>

        * i386-linux-nat.c: No need to #include "frame.h" any more.
        (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
        LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
        LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
        LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
        LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
        LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
        linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
        i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
        i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
        i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
        i386_linux_sigtramp_saved_sp):  Deleted.  Folks rightly pointed
        out that these are target-dependent, and useful in non-native
        configurations.  Moved to...
        * i386-linux-tdep.c: ... Here, a new file.
        * Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
        (i386-linux-tdep.o): New rule.
        (i386-linux-nat.o): We no longer depend on frame.h.
        * config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.

2000-03-04  Eli Zaretskii  <eliz@is.elta.co.il>

        * event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
        Print an error at compile time if we are to use select, but FD_SET
        is not available.
        (SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
        if HAVE_POLL is not defined and NO_FD_SET *is* defined.
        (create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
        (delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
        (gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
        instead of using memcpy and memset.  Use FD_ISSET.

        * config/i386/xm-go32.h (fd_mask): Remove typedef.

Mon Mar 20 19:58:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * command.c (_initialize_command): Document requirements for ``!''
        command.

Mon Mar 20 18:12:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Fri 10 Mar 2000 Robert
        <robert.melchers@drives.eurotherm.co.uk>:
        * sh-tdep.c (sh_processor_type_table): Add entry for sh2.

Mon Mar 20 17:33:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Thu Mar 16 16:49:27 EST 2000 John David Anglin
        <dave@hiauly1.hia.nrc.ca>:
        * configure.in (CONFIG_INITS): Don't include hpux-thread.c. Stops
        _initialize_hpux_thread being called twice.
        * configure: Regenerated.

2000-03-19  Eli Zaretskii  <eliz@is.elta.co.il>

        * event-top.c (_initialize_event_loop): If instream is not
        connected to a terminal device, turn editing off.

2000-03-19  Eli Zaretskii  <eliz@is.elta.co.il>

        Support for building GDB with DJGPP, and running the test suite on
        it:
        * config/djgpp/djconfig.sh: New file.
        * config/djgpp/config.sed: New file.
        * config/djgpp/README: New file.
        * config/djgpp/fnchange.lst: New file.
        * config/djgpp/djcheck.sh: New file.

2000-03-19  Eli Zaretskii  <eliz@is.elta.co.il>

        * ser-go32.c (ports): Make the initializers complete, to pacify
        GCC 2.9X.

2000-03-17  Jim Blandy  <jimb@redhat.com>

        * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
        two-dimensional array, instead of faking it with explicit index
        arithmetic.

        * linux-thread.c (linuxthreads_attach, linuxthreads_detach,
        linuxthreads_create_inferior): Fix typo in variable name: it's
        linuxthreads_exit_status, not linux_exit_status.

        * gdb_wait.h (WSETSTOP): Pass the appropriate number of arguments
        to W_STOPCODE.

        * solib.c (solib_add): Delete debugging code.

2000-03-17  Mark Kettenis  <kettenis@gnu.org>

        * gdb_wait.h: add definitions of WSETSTOP and WSETEXIT for Linux.
        * linux-thread.c: Use WSETSTOP instead of W_STOPCODE.

Fri Mar 17 11:06:59 2000  Philippe De Muyter  <phdm@macqel.be>

        * language.c (set_lang_str): Do not call `free' for a null pointer.
        (set_type_str, set_range_str): Ditto.

2000-03-16  Jim Blandy  <jimb@redhat.com>

        * i386-linux-nat.c (i386_linux_saved_pc_after_call): Lost in the
        merge; reinstated.

        * solib.c (current_sos): Be more careful about freeing the new
        so_list node if an error occurs.

        * i386-tdep.c (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
        LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
        LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
        LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
        LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
        LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
        linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
        i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
        i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
        i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
        i386_linux_sigtramp_saved_sp):  Deleted.  These all implement
        Linux-specific signal trampoline detection, and should be moved
        to...
        * i386-linux-nat.c: ... here.
        * config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
        this any more, since we're not enabling OS-specific code in a
        OS-independent file.
        
2000-03-16  Eli Zaretskii  <eliz@is.elta.co.il>

        * Makefile.in (go32-nat.o): Add prerequisites.
        (ALLDEPFILES): Add go32-nat.c.

2000-03-15  Michael Snyder  <msnyder@cygnus.com>

        From "Peter.Schauer" <Peter.Schauer@regent.e-technik.tu-muenchen.de>
        * symfile.c (reread_symbols):  Clear msymbol hash table.

2000-03-15  Jim Blandy  <jimb@redhat.com>

        Deal with the inferior unloading shared objects.
        * solib.c (current_sos): New function, replacing find_solib.
        (find_solib): Deleted.
        (free_so): New function.
        (clear_solib): Call free_so, instead of writing it out.
        (solib_add): Rewritten: compare the inferior's current list of
        shared objects with GDB's list, and do the required loads and
        unloads.
        (info_sharedlibrary_command, solib_address): Don't use find_solib
        to walk the list of shared libraries: call solib_add, and then
        walk the list at so_list_head normally.
        * objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
        detach the core target.  These tasks are taken care of elsewhere.
        * target.c (remove_target_sections): New function.
        * target.h (remove_target_sections): New declaration.

        * solib.c (symbol_add_stub): Check whether we've already created
        an objfile for this shared object first, before doing all that
        work to compute section addresses, etc.

        * objfiles.c (unlink_objfile): Report an internal error if objfile
        doesn't occur in the object_files list.

        * solib.c (special_symbol_handling): Delete argument; it's not
        used.
        
        Changes from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:

        * solib.c (SOLIB_EXTRACT_ADDRESS):  New macro to extract addresses
        from solib structures. Use it throughout solib.c, get rid of all
        CORE_ADDR casts.
        (struct so_list):  Change type of lmaddr to CORE_ADDR.
        (first_link_map_member):  Change return value type to CORE_ADDR,
        update callers.
        (solib_add_common_symbols):  Change parameter type to CORE_ADDR,
        update callers.
        (open_symbol_file_object, find_solib):  Change type of lm variable
        to CORE_ADDR.

2000-03-15  Eli Zaretskii  <eliz@is.elta.co.il>

        * ser-go32.c (dos_noop, dos_raw, dos_noflush_set_tty_state)
        (dos_print_tty_state, dos_info, _initialize_ser_dos): Convert
        to ISO C.  Use ATTRIBUTE_UNUSED to avoid compiler warnings.
        (dos_info): Avoid compiler warning when printing a ptrdiff_t.

        * ser-go32.c (dos_get_tty_state): Fail if the (fake) handle was
        not opened by dos_open, but let the 3 standard handles go through
        unharmed.

2000-03-14  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * eval.c (evaluate_subexp_with_coercion): Add call to
        check_typedef, to handle typedeffed vars correctly.

Mon Mar 13 21:21:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * defs.h (STREQ, STRCMP, STREQN): Document that these macros are
        somewhat redundant.
        (QUIT): Note that this can probably be replaced by a function.

2000-03-13  James Ingham  <jingham@leda.cygnus.com>

        Add support for a variable object that tries to evaluate itself in 
        the currently selected frame, rather than in a fixed frame.
        
        * wrapper.c,h (gdb_parse_exp_1): Added a wrapper for
        gdb_parse_exp_1.
        * varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n 
        of varobj_create.
        * varobj.c (varobj_list): Return type indicates whether the
        variable's type has changed (for current frame variables).
        (varobj_update): Handle the case where the variable's type has
        changed.
        (delete_variable_1): Allow for deletion of variables that have not 
        been installed yet.
        (new_root_variable): Initialize use_selected_frame variable.
        (value_of_root): This is where most of the work to handle "current 
        frame" variables was added.  Most of the complexity involves
        handling the case where the type of the variable has changed.
        (varobj_create): Add a "type" argument, to tell if the
        variable is one of these "current frame" variables.  Also protect
        call to parse_exp_1 from long jumping.
        
2000-03-13  Eli Zaretskii  <eliz@is.elta.co.il>

        * go32-nat.c (struct env387): Remove declaration.
        (print_387_status, i386_go32_float_info): Remove redundant
        functions.
        (regno_mapping, sig_map, excepn_map): Add braces around inner
        initializers.
        (many functions): Use ATTRIBUTE_UNUSED to shut up the compiler;
        fix code which mixed signed with unsigned.
        (go32_resume): Use TARGET_SIGNAL_LAST instead of -1.
        (go32_wait): Initialize INT3_addr.
        (go32_fetch_registers): Extend all FP registers that are shorter
        than 4 bytes to 32 bits.  Support 32 standard FP registers defined
        on config/i386/tm-i386.h.
        (store_register): Support 32 FP registers.
        (go32_create_inferior): Don't crash if handed a NULL pointer
        instead of exec file name.
        (ignore): Remove unused function.
        (go32_insert_hw_breakpoint): Remove unused variables.
        (init_go32_ops): Set value of processing_gcc_compilation to 2.

Mon Mar 13 18:54:42 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-03-10 Daniel Berlin <dan@cgsoftware.com> Fix C++
        overloading, add support for seeing through references:
        * valops.c (find_overload_match): Handle STABS overloading for
        C++.
        (find_overload_match): Look in right place for function arguments
        in the debug info.
        (find_overload_match): Rather than giving up when we have >1
        perfect match, just choose one, especially since the
        recommendation GDB gives ("disambiguate it by specifying function
        signature"), is basically impossible.
        (check_field_in): STREQ->strcmp_iw
        (search_struct_field): STREQ->strcmp_iw
        (find_method_list): STREQ->strcmp_iw
        * gdbtypes.c (rank_one_type): Add ability to see through
        references.
        (rank_one_type): strcmp->strcmp_iw, because the whitespace could
        be different.
        (rank_function): Rank function properly (was doing it wrong
        before, comparing the wrong parts of the arrays)
        (rank_one_type): Change #if 0 to #ifdef DEBUG_OLOAD.
        * gdbtypes.h: Add REFERENCE_CONVERSION_BADNESS for "badness"
        associated with converting a non-reference to a reference.
    * eval.c (evaluate_subexp_standard): for OP_VAR_VALUE, always
    return full value object; for STRUCTOP_PTR, use pointer to
    rtti type to get member / method if objectprint is set and
    target type of pointer is class.

        * gdbtypes.c (rank_one_type): Add comment on how to eliminate the
        #ifdef DEBUG_OLOAD.
        
2000-03-11  Mark Kettenis  <kettenis@gnu.org>

        * gnu-nat.c: Fix the formatting where indent misinterpreted `&' as
        a binary operator.
        (gnu_attach): Change error message for missing
        argument to be identical to the corresponding message in
        `inftarg.c'.  This makes the testsuite happy.

2000-03-11  Mark Kettenis  <kettenis@gnu.org>

        * i386gnu-nat.c (gnu_store_registers): Make sure the T bit in the
        %eflags isn't modified.  This fixes a bug where every call to a
        function in the program beyond the first call would fail.

Fri Mar 10 11:44:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Devolve responsibility for domain maintenance.

2000-03-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * minsyms.c (prim_record_minimal_symbol_and_info): Add comment.

2000-02-25  Scott Bambrough <scottb@netwinder.org>

        * gdb.base/long_long.exp: Correct test suite failure when printing
        a long long value as a double on ARM platforms.

Thu Mar  9 14:21:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS (Core): Anthony Green is the Java - including
        testsuite - maintainer.  Reformat testsuite and language support
        sections

2000-03-08  Mark Kettenis  <kettenis@gnu.org>

        * i386-tdep.c (i386_linux_saved_pc_after_call): New function.
        * config/i386/tm-linux.h (SAVED_PC_AFTER_CALL): Define to call
        i386_linux_saved_pc_after_call.

2000-03-06  Jim Blandy  <jimb@redhat.com>

        From Tom Tromey <tromey@cygnus.com> and Keith Seitz <?>:

        * minsyms.c: #include <ctype.h>, for msymbol_hash_iw.
        (compact_minimal_symbols): Added `objfile' argument.
        Put symbols in the objfile's hash table.
        (install_minimal_symbols): Put symbols in the objfile's demangled
        hash table.
        (lookup_minimal_symbol): Use hash table to find symbol in
        objfile.
        (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): New
        functions.
        (prim_record_minimal_symbol_and_info): Initialize the
        hash link fields of the new minimal symbol.
        * symtab.h (struct minimal_symbol): New fields `hash_next',
        `demangled_hash_next'.
        (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): Declare.
        * objfiles.h (MINIMAL_SYMBOL_HASH_SIZE): New define.
        (struct objfile): New fields `msymbol_hash',
        `msymbol_demangled_hash'.

2000-03-06  Jim Blandy  <jimb@redhat.com>

        * solib.c (first_link_map_member): Doc fix.

2000-03-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        From  Eli Zaretskii  <eliz@is.elta.co.il>:

        * event-loop.c (poll_timers): Don't compare delta.tv_sec with
        zero, since time_t might be unsigned.

2000-03-06  Mark Kettenis  <kettenis@gnu.org>

        * i386-linux-nat.c (supply_fpregset): Mask off the reserved bits
        in *FPREGSETP.
        (convert_to_fpregset): Don't touch the reserved bits in *FPREGSETP.

2000-03-05  Mark Kettenis  <kettenis@gnu.org>

        Allow GDB to run on Linux 2.0 again.
        * config.in: Add HAVE_PTRACE_GETREGS.
        * configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
        * configure: Regenerated.
        * config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
        CANNOT_STORE_REGISTER): New defines.
        * i386-linux-nat.c (have_ptrace_getregs): New variable.
        (PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
        old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
        store_register, old_store_inferior_registers): Copied over from
        `inptrace.c' as a temporary measure.
        (fetch_regs, store_regs, fetch_fpregs, store_fpregs):
        Conditionalize on HAVE_PTRACE_GETREGS.  Define stubs if
        HAVE_PTRACE_GETREGS isn't defined.
        (fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
        with EIO.
        (fetch_inferior_registers, store_inferior_registers): Fall back on
        the method use in `infptrace.c' (by calling
        old_fetch_inferior_registers and old_store_inferior_registers) if
        `have_ptrace_getregs' isn't set.

2000-03-05  Mark Kettenis  <kettenis@gnu.org>

        * i386-linux-nat.c: Use elf_gregset_t and elf_fpregset_t instead
        of gregset_t and fpregset_t.  Those are the only names that are
        guaranteed to specify the right types for all supported Linux
        systems out there.
        Various doc fixes and gratitious local variable renames, all in an
        attempt to stress similarities between the code and unify the
        terminology used.  Use ISO-C all over.
        (regmap): Remove trailing comma.
        (FPREG_ADDR): Renamed from FPREGSET_T_FPREG_ADDR.
        (convert_to_gregset): Make static.  Remove GDB_REGS argument.  It
        is unnecessary and wasn't used anyway.  All callers changed.
        (convert_to_fpregset, convert_to_xfpregset): Likewise.
        (fetch_regs, store_regs): Remove unused variable `regno'.
        (fill_fpregs): If REGNO is not -1, only update the specified
        register.
        (fetch_core_registers): Renamed from
        i386_linux_fetch_core_registers.  There is no need for a unique
        name since the function is static anyway.
        (linux_elf_core_fns): Renamed from i386_linux_nat_core_functions
        since it is more descriptive.

Sun Mar  5 19:40:27 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS (readline/): Expand to include host maintainers.

2000-03-04  Mark Kettenis  <kettenis@gnu.org>

        Fix support for Linux/i386 signal trampolines.  The old approach
        didn't work for Linux 2.2 and beyond, and didn't work with recent
        versions of the GNU C library.
        * i386-tdep.c (LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
        LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): New defines.
        (linux_rt_sigtramp_code): New variable.
        (LINUX_RT_SIGTRAMP_LEN): New define.
        (i386_linux_rt_sigtramp_start): New function.  Detect start of
        signal trampolines for RT signals.
        (i386_linux_sigtramp): Removed.
        (i386_linux_in_sigtramp): New function.
        (i386_linux_sigcontext_addr): New function.  Recognize the names
        of the signal tranmpolines used by recent versions of the GNU C
        library, and add support for RT signals.
        (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):  New
        defines.  Moved here from config/i386/tm-linux.h.
        (i386_linux_sigtramp_saved_pc, i386_linux_sigtramp_saved_sp):
        Reimplement in terms of i386_linux_sigcontext_addr.
        * config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Removed.
        (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):
        Moved to i386-tdep.c.
        (IN_SIGTRAMP): Redefine to call i386_linux_in_sigtramp.

Sat Mar  4 19:38:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        By: Sat Mar 4 04:08:58 2000 Alexandre Oliva <oliva@lsd.ic.unicamp.br>
        * Makefile.in (all-gdbtk): Fix $srcdir to ${srcdir}.

Sat Mar  4 17:23:06 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Frank Ch. Eigler and Andrew Cagney co-ordinate the
        sim directory.

Sat Mar  4 16:19:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Add Michael Snyder and Peter Schauer to list of
        ``Blanket Write Privs'' maintainers.

Sat Mar  4 15:58:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Sun 20 Feb 2000 Robert Lipe <robertl@sco.com>:
        * language.c (longest_local_hex_string_custom): Don't compile
        'long long' section if host doesn't have 'long long'.

Sat Mar  4 15:45:38 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * language.c (longest_raw_hex_string): Comment out.  Appears
        unused.

Sat Mar  4 13:02:09 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * utils.c (mcalloc), defs.h (mcalloc): Keep consistent with
        "mmalloc.h" which means using PTRs.
        (init_malloc, msavestring, mstrsave): Convert to PTR free ISO-C.

Sat Mar  4 11:49:21 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * defs.h (store_address, store_unsigned_integer, store_address):
        Replace PTR with void* in delcaration.
        * findvar.c (extract_signed_integer, extract_unsigned_integer,
        extract_long_unsigned_integer, extract_address,
        store_signed_integer, store_unsigned_integer, store_address):
        Convert definition to ISO-C.  Replace PTR with void*.

Sat Mar  4 10:57:25 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * defs.h (make_cleanup_func): Document as deprecated.
        (make_cleanup_ftype): New typedef.  Make signature consistent with
        other function typedefs.  Document as not be used out side of
        make_cleanup code. Use in make_cleanup declarations.
        (null_cleanup): Replace PTR with void*.
        
        * utils.c (make_cleanup, make_final_cleanup, make_run_cleanup,
        make_exec_cleanup, make_exec_error_cleanup, make_my_cleanup,
        null_cleanup): Change K&R definition to ISO-C using void* and
        make_cleanup_fytpe.
        (discard_my_cleanups): Don't cast argument to free.

2000-03-03  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * defs.h (struct continuation_arg): Change type of field 'data'
        from PTR to void *.

        * event-loop.h: Eliminate uses of PTR, use 'void *' instead.

        * event-top.c: Ditto.

Fri Mar  3 15:39:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (CONFIG_CLEAN, CONFIG_ALL, LN_S): Defined by
        configure.
        (SUBDIR_MI_CLEAN, SUBDIR_GDBTK_CLEAN, SUBDIR_MI_ALL,
        SUBDIR_GDBTK_ALL): Define.
        (all-gdbtk, clean-gdbtk): New targets.
        (all): Add CONFIG_ALL as dependency.
        (clean): Add CONFIG_CLEAN as dependency.
        
        * configure.in (CONFIG_ALL, CONFIG_CLEAN): Define.
        (LN_S): Define.  Delete GDBtk's link code.

Fri Mar  3 13:12:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (ENABLE_GDBTK): Delete variable.
        (enable-gdbtk): Only enable gdbtk when there is a GDBTK directory.
        * Makefile.in: Update.
        * configure: Regenerate

2000-03-02  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * config/alpha/alpha-linux.mh: Remove core-regset.o fron the
        NATDEPFILES list.

2000-03-02  Mark Kettenis  <kettenis@gnu.org>

        * config/i386/tm-i386aix.h (NUM_FPREGS, NUM_REGS, REGISTER_BYTES):
        Override definitions to include the normal FPU registers.
        (REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL,
        REGISTER_CONVERT_TO_RAW): Removed.  The default definitions are
        fine for AIX/i386.
        (i387_to_double, double_to_i387): Remove prototypes.

2000-03-02  Kevin Buettner  <kevinb@redhat.com>

        * findvar.c (extract_floating, store_floating): Use target
        floating point type sizes rather host sizes to determine
        which conversion needs to be done.

2000-03-02  Nick Duffek  <nsd@cygnus.com>

        * uw-thread.c: Apply GNU conventions to comment formatting.
        (deactivate_uw_thread): Call remove_thread_event_breakpoints().
        (uw_thread_mourn_inferior): Move remove_thread_event_breakpoints()
        call to deactivate_uw_thread().

Thu Mar  2 09:04:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Daniel Berlin is C++ maintainer.         

Thu Mar  2 08:55:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Mark Kettenis is the x86 architcture maintainer and
        a joint GNU/Linux/x86 maintainer.  Nick Duffeck and Robert Lipe
        share SCO/Unixware.  Nick Duffek and Peter Schauer share
        Solaris/x86.

Wed Mar  1 22:12:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
        
        From Wed 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
        * remote-sim.c (gdbsim_close): Call generic_mourn_inferior.
        * remote-rdi.c (arm_rdi_close): Ditto. 

Wed Mar  1 19:31:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * CONTRIBUTE (configure.in): Note that patches to configure are
        not needed.

2000-03-01  Mark Kettenis  <kettenis@gnu.org>

        * MAINTAINERS: Correct my own mail address.

Wed Mar  1 11:26:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Document people with paperwork pending.

Wed Mar  1 00:49:06 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-02-28 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
        Make NEW_PROC_ABI interface functional on Solaris x86.
        * sol-thread.c (ps_lgetLDT): Rewrite to use new
        procfs_find_LDT_entry function from procfs.c, mostly copied from
        lin-thread.c.
        * inferior.h, procfs.c (procfs_get_pid_fd): Removed, no longer
        needed.

Wed Mar  1 00:34:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-02-26 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
        * config/i386/tm-i386sol2.h (MERGEPID): Define.

Wed Mar  1 00:06:19 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 1999-08-13 J.T. Conklin <jtc@redback.com>:
        * config/i386/tm-i386.h (FRAME_INIT_SAVED_REGS): Replace
        FRAME_FIND_SAVED_REGS.
        (i386_frame_init_saved_regs): Replace i386_frame_find_saved_regs.
        * i386-tdep.c (i386_frame_init_saved_regs, i386_pop_frame):
        Update.

Tue Feb 29 23:56:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-02-23 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
        * objfiles.c (open_mapped_file):  Fix obsolete references to `mapped'
        parameter.

Tue Feb 29 18:47:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
        * config/i386/nm-go32.h (FLOAT_INFO): Remove macro definition.
        (top level): Add prototypes for go32_* functions.
        * config/i386/tm-go32.h (I386_DJGPP_TARGET): Define.
        (FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
        Override definitions from tm-i386.h.
        (REGISTER_VIRTUAL_TYPE): Remove macro definition.
        * i386-tdep.c (i386_extract_return_value)
        [I386_AIX_TARGET || I386_GNULINUX_TARGET]: Add I386_DJGPP_TARGET
        to the list of targets which return FP values in FP registers.

        * i386-tdep.c (i386_extract_return_value): Add FIXME recommending
        that this function be re-implemented using multi-arch.

Tue Feb 29 18:40:08 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
        * utils.c [__GO32__]: Include pc.h, for prototypes of ScreenCols
        and ScreenRows.
        * ser-go32.c: Include string.h, for prototype of strncasecmp.
        (dpmi_regs, dpmi_sregs): Remove unused variables.
        (dos_flush_input): Return a value, to prevent compiler warning.
        * expprint.c (dump_prefix_expression): Use %ld in format and cast
        sizeof(union exp_element) to long, to prevent GCC from complaining
        about format/argument mismatch.
        (dump_postfix_expression): Likewise.

Tue Feb 29 18:09:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * arm-tdep.c: Include <ctype.h>.

Tue Feb 29 17:33:49 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Wed, 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
        * stack.c (backtrace_command_1), infrun.c (normal_stop): Check
        that the target's stack was valid.

Tue Feb 29 15:14:56 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-02-22 Stephane Carrez <stcarrez@worldnet.fr>:
        * dwarf2read.c (read_address): Read 16-bits addresses.

2000-02-28  Scott Bambrough <scottb@netwinder.org>

        * arm-linux-nat.c (fetch_nw_fpe_*):
        Renamed to fetch_nwfpe_* to use the same naming convention
        as in the Linux kernel.  Modified prototype to get rid of
        unused parameters.
        (store_nw_fpe_*): Renamed to store_nwfpe_* to use the same
        naming convention as in the Linux kernel.  Fixed calls to 
        fetch_nwfpe_*.
        (store_fpregs): Fixed calls to store_nwfpe_*.  Removed
        unused variable. 

Mon Feb 28 18:24:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Transfer d30v maintainership to David Taylor.

2000-02-28  Christopher Faylor  <cgf@cygnus.com>

        * win32-nat.c: Remove unneeded header.
        * wince.c: Ditto.

Mon Feb 28 13:34:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * wince.c: Include "gdb_wait.h" and not "wait.h".

Mon Feb 28 10:58:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Mention mmalloc.  Expand Host/Native and
        Target/Architecture maintainers descriptions.

2000-02-26  Mark Kettenis  <kettenis@gnu.org>

        * gnu-nat.c: Include "gdbthread.h".  Include <hurd.h>.
        Reorder headers a bit.  Overall cleanup and minor reformatting.
        (MIG_SERVER_DIED): Remove define.
        (proc_update_sc): Add braces to silence compiler warning.
        (proc_steal_exc_port): Initialize err to zero.
        (make_proc): Add braces to silence compiler warning.
        (inf_validate_task_sc): Add cast to silence compiler warning.
        (inf_set_traced): Reorganize a bit to silence compiler warning.
        (inf_validate_procs): Use mach_msg_type_number_t for all thread
        numbers and add braces to silence compiler warning.
        (gnu_wait): Add prototypes for server functions and add braces to
        silence compiler warnings.
        (S_exception_raise_request): Pass subcode to inf_debug call.
        (gnu_write_inferior): Remove unused variable `protection_changed'.
        (gnu_xfer_memory): Remove unused variable `result'.
        (set_sig_thread_cmd): Remove unused varible `tid'.
        (set_signals_cmd): Remve unused variable `trace'.
        (add_task_commands): Provide complete prototype.  Reformat help
        strings a bit to make sure the first line is a full sentence.
        Call info_port_rights_cmd instead of info_send_rights_cmd for the
        "info port-rights" command.
        (add_thread_commands): Provide complete prototype.  Make static.
        Reformat help strings a bit to make sure the first line is a full
        sentence.
        (_initialize_gnu_nat): Provide complete prototype.

2000-02-26  Mark Kettenis  <kettenis@gnu.org>

        Make cross-compilation for the Hurd more friendly.
        From Jeff Bailey <jbailey@gnu.org>:
        * configure.in: Use AC_CHECK_TOOL to find MiG.
        * Makefile.in (MIG): New variable.
        * config/i386/i386gnu.mh (MIG): Remove.
        * configure: Regenerated.

2000-02-26  Kevin Buettner  <kevinb@redhat.com>

        * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add
        comment explaining motivation behind this function and why
        the generic facilities won't work for this platform.
        * rs6000-tdep.c (skip_prologue): Always test to make sure
        that an instruction is read successfully from the target's
        memory.  Introduce notion of instructions which may appear in
        the prologue, but may not end the prologue.  Added explicit
        check for nop instruction.  Use memset() to zero the frame
        data instead of assignment from a statically allocated,
        uninitialized structure.

Sat Feb 26 17:15:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Chris Faylor is responsible for all MS Windows
        systems.  Note that Jim Blandy as maintainer for ``tracing
        bytecode stuff''

2000-02-25  Fernando Nasser  <fnasser@cygnus.com>

        From: Thomas Zenker <thz@Lennartz-electronic.DE>
        * rdi-share/hsys.c: to compile under 4.4BSD derived systems (FreeBSD,
        NetBSD...) sys_errlist should not be declared in hsys.c.
        NEED_SYSERRLIST is set already by configure, so we can use it.
        * rdi-share/unixcomm.c: 4.4BSD derived systems define BSD, but are
        posix compliant and we should not work with the old compatibility
        stuff.  Because of that I undef BSD in case of FBSD etc and include
        sys/ioctl to get the flags.
        * rdi-share/unixcomm.c: If the TIOCEXCL flags exists set serial line
        for exclusive use.

2000-02-24  Kevin Buettner  <kevinb@redhat.com>

        * ppc-linux-tdep.c (ppc_sysv_abi_push_arguments): Put address
        of return structure in r3 if necessary.
        (ppc_linux_memory_remove_breakpoints): New function.
        * rs6000-tdep.c (skip_prologue): Make sure that the cases
        for storing either cr or lr to the stack only handle those
        cases.  (I.e, don't let these cases match 0x00000000 which is
        found found in the shared library trampoline prior to the
        loading of the shared library.)
        * config/powerpc/tm-linux.h (ppc_linux_memory_remove_breakpoint):
        Declare.
        (MEMORY_REMOVE_BREAKPOINT): Define.

Wed Feb 23 23:27:48 2000  Andrew Cagney  <cagney@behemoth.cygnus.com>

        * hppah-nat.c: Include "gdb_wait.h" instead of <wait.h>.

Thu Feb 24 18:42:15 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Set to
        $(SUBDIR_*_INSTALL) when so configured.
        * configure: Regenerate.
        
        * Makefile.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Define using
        configure.
        (install-only): Add dependency on $(CONFIG_INSTALL).  Delete code
        installing GDBtk.
        (uninstall): Add dependency on $(CONFIG_UNINSTALL).
        (SUBDIR_MI_INSTALL, SUBDIR_MI_UNINSTALL, SUBDIR_GDBTK_UNINSTALL,
        SUBDIR_GDBTK_INSTALL): Define.
        (install-gdbtk): New target.

Thu Feb 24 18:19:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (SUBDIR_MI_CFLAGS): Fix typo, wrong brace.
        * configure: Regenerate.
        
2000-02-24  Christopher Faylor  <cgf@cygnus.com>

        * configure.tgt: Add arm, mips, sh wince targets.
        * config/arm/tm-wince.h: New file.
        * config/arm/wince.mt: New file.
        * config/sh/tm-wince.h: New file.
        * config/sh/wince.mt: New file.
        * config/mips/tm-wince.h: New file.
        * config/mips/wince.mt: New file.
        * wince.c: New file.
        * wince-stub.c: New file.
        * wince-stub.h: New file.
        * sh-tdep.c: Use correct register names for Windows CE.

Wed Feb 23 19:01:45 EST 2000  Nicholas Duffek <nsd@cygnus.com>

        * top.c (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Update comments.
        (error_return, quit_return): Merge into catch_return pointer.
        (return_to_top_level): Update comment.  Longjmp to *catch_errors,
        and communicate reason to catch_errors via setjmp return value.
        (catch_errors): Always catch both quit and error, and if a catch
        wasn't requested by caller, throw it to the next catch_error.
        Replace dual longjmp buffer memcpy with single pointer change.
        Add FIXME for possibly adding new interface to tell caller what
        event was caught.  Add extensive comments.
        * defs.h (enum return_reason): Reserve 0 for use as initial
        setjmp() return value.
        (RETURN_MASK): New public macro to generate RETURN_MASK_* from
        enum return_reason.
        (RETURN_MASK_QUIT, RETURN_MASK_ERROR): Define using RETURN_MASK.

2000-02-23  Fernando Nasser  <fnasser@cygnus.com>

        * infcmd.c (run_stack_dummy): Do not pop frame on random signal.
        * valops.c (_initialize_valops): Add command "set unwindonsignal".
        (hand_function_call): Test for unwind_on_signal and act accordingly.

Wed Feb 23 12:58:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh (dis_asm_read_memory): Change LEN to unsigned long.
        Match ../include/dis-asm.h change.
        * gdbarch.h: Regenerate.
        * corefile.c (dis_asm_read_memory): Update.

Mon Feb 21 13:57:27 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (CONFIG_INITS): Fix typo, was CONFIG_INIT.
        (ENABLE_CFLAGS): Move initialization to start of file.
        (enable-gdbmi): Add new configure option --enable-gdbmi.  When
        selected and an ${srcdir}/mi directory is present enable MI
        interface.

        * configure: Regenerate.
        
        * Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS, SUBDIR_MI_DEPS,
        SUBDIR_MI_INITS, SUBDIR_MI_LDFLAGS, SUBDIR_MI_CFLAGS): New macros.
        (CONFIG_OBS, CONFIG_SRCS, CONFIG_DEPS, CONFIG_INITS,
        CONFIG_LDFLAGS): New macros.  Initialized by autoconf via
        @CONFIG...@.
        (INTERNAL_LDFLAGS, CDEPS, LINTFILES, DEPFILES, SOURCES,
        INIT_FILES): Use $(CONFIG_...) instead of @CONFIG...@.

        * mi: New directory. MI interface to GDB.

        * defs.h (interpreter_p): Declare when UI_OUT.
        * top.c (gdb_init): When interpreter_p, check that the interpreter
        was recognized by one of the linked in interpreters.
        * main.c (interpreter_p): Define.
        (captured_main): When UI_OUT, check for ``-i <interpreter>'' option.
        * event-top.c (display_gdb_prompt): When interpreter_p, assume
        interpreter displays prompt.

        * breakpoint.c (print_it_typical, watchpoint_check,
        print_one_breakpoint, mention): When MI include additional
        target status information.
        * infrun.c (print_stop_reason, normal_stop): Ditto.

2000-02-22  Jim Blandy  <jimb@redhat.com>

        * gdbarch.sh: Make the `default' field really default to zero, as
        documented.

        Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.
        * valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
        more function-like.
        (default_coerce_float_to_double, standard_coerce_float_to_double):
        New functions.
        (value_arg_coerce): Adjust for new definition.
        * value.h (default_coerce_float_to_double,
        standard_coerce_float_to_double): New declarations for the above.
        * gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
        * gdbarch.c, gdbarch.h: Regenerated.
        * tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
        tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
        definitions.
        * mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
        function here.
        (mips_gdbarch_init): Install that as our coerce_float_to_double
        function.

2000-02-22  Kevin Buettner  <kevinb@redhat.com>

        * ppc-linux-nat.c (supply_gregset, supply_fpregset): Add return
        type.
        * ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Add
        forward declaration.

        * ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Handle case
        where the next frame is a signal handler caller.

        * config/powerpc/tm-linux.h (PUSH_ARGUMENTS): Remove extraneous
        undef.
        (tm-linux.h): Include.
        (tm-sysv4.h): Don't include (directly).  config/tm-linux.h will
        include this file for us.
        (REALTIME_LO, REALTIME_HI): Don't define.  These are defined by
        config/tm-linux.h for us.
        (SOFUN_ADDRESS_MAYBE_MISSING): Define.

2000-02-21  Kevin Buettner  <kevinb@redhat.com>

        * Makefile.in (ppc-linux-nat.c, ppc-linux-tdep.c): New files.
        (ppc-linux-nat.o, ppc-linux-tdep.o): Add dependencies.
        * configure.tgt (powerpc-*-linux*): Separate from powerpc-*-eabi
        and like targets.

        * ppc-linux-nat.c, ppc-linux-tdep.c, config/powerpc/linux.mt,
        config/powerpc/nm-linux.h, config/powerpc/tm-linux.h: New files.
        * config/powerpc/xm-linux.h: Substantially revised for native
        port.
        * config/powerpc/linux.mh (NAT_FILE): Redefine to be nm-linux.h.
        (NATDEPFILES): Update list to reflect the fact that we can
        now debug natively.

        * rs6000-tdep.c, config/rs6000/tm-rs6000.h
        (rs6000_frameless_function_invocation, rs6000_frame_saved_pc):
        Renamed; The former names were lacking the rs6000_ prefix.
        * rs6000-tdep.c (rs6000_frame_saved_pc): Call FRAME_CHAIN
        instead of rs6000_frame_chain.
        (rs6000_frame_chain): Call FRAMELESS_FUNCTION_INVOCATION instead
        of rs6000_frameless_function_invocation.

2000-02-21  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        From Philippe De Muyter  <phdm@macqel.be>

        * event-loop.c (handle_file_event): In case of poll, enable
        printing of informational message if an error/exception is
        detected on the file descriptor.

2000-02-21  Jim Kingdon  <kingdon@redhat.com>

        * MAINTAINERS (Misc): Clarify that yes, anyone can edit web pages.

Mon Feb 21 12:50:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * buildsym.c: Include "language.h" and "expression.h" for
        longest_local_hex_string_custom.

Mon Feb 21 11:17:18 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdbarch.sh: Include <gdb_wait.h> instead of <wait.h>.
        * gdbarch.c: Already updated by Wed Feb 9 18:59:16 2000 Andrew
        Cagney <cagney@b1.cygnus.com>.

Mon Feb 21 11:03:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Update: IA-64 - Kevin Buettner; ARM - Fernando
        nasser, Jim Ingham and Scott Bambrough; GNU/Linux ARM - Scott
        Bambrough; event loop - Elena Zannoni; SDS and RDI/APD protocol -
        to Fernando Nasser and Jim Ingham; KOD - Fernando Nasser; MI -
        Andrew Cagney, Elena Zannoni and Fernando Nasser; Web pages - Jim
        Kingdon.
        * MAINTAINERS: Add Nick Clifton to write after approval list.
        
Mon Feb 21 10:30:39 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Add note on multiple maintainers.

2000-02-19  Philippe De Muyter  <phdm@macqel.be>

        * cli-out.c (cli_table_header): Type of parameter `alignment' is
        `enum ui_align', not `int'.
        (cli_field_string, cli_field_skip): Likewise.

2000-02-18  Jim Blandy  <jimb@redhat.com>

        From Jimmy Guo <guo@cup.hp.com>:
        * buildsym.h (add_free_pendings): Declare.
        * buildsym.c (add_free_pendings): New function.
        (make_blockvector): 32x64 fix using longest_local_hex_string().
        (start_subfile): initialize variable 'subfile'.

2000-02-18  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * remote.c (remote_async_detach): Use target_mourn_inferior(), to
        make sure that all is cleaned up after we disconnect from the
        target.
        (remote_detach): Ditto.

2000-02-17  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        From Rodney Brown  <RodneyBrown@pmsc.com>
        * ui-out.c (ui_out_set_flags): Fix typo, removing warning and
        potentially harming mistake.

2000-02-17  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * arm-tdep.c: Use header file instead of extern declarations for
        the {get,set}_arm_regname* functions.

2000-02-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * configure.in: Replaces obsolete gdbtk-variable.c with
        gdbtk-varobj.c.
        * configure: Regenerate.
        * Makefile.in: Remove obsolete/extraneous references to
        gdbtk-var* files.

2000-02-16  Mark Kettenis  <kettenis@gnu.org>

        * target.c (do_target_signal_to_host): Do not use REALTIME_LO in
        the conversion of the signal number.  TARGET_SIGNAL_REALTIME_33 is
        33 by definition, whereas REALTIME_LO might be 32 on systems that
        have SIG32 such as Linux.  Make sure that the signal number
        returned is within the range specified by REALTIME_LO and
        REALTIME_HI.

2000-02-16  Mark Kettenis  <kettenis@gnu.org>

        * configure: Regenerated.

2000-02-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * arm-tdep.c (set_disassembly_flavor, arm_othernames,
        _initialize_arm_tdep): Allows the user to choose between any of
        the flavors available for the disassembly to be used in the "info
        reg" command and elsewhere in gdb.  It prevents having to maintain
        this information in two places by using the data kept in the
        opcodes directory.

2000-02-09  Mark Kettenis  <kettenis@gnu.org>

        * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
        prfpregset_t in <sys/procfs.h>.
        * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
        HAVE_PRFPREGSET_T.
        * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
        prgregset_t and prfpregset_t if they are not already present.

Wed Feb 16 19:00:02 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
        * procfs.c: Define MERGEPID if not defined. For osf4.0e.

2000-02-15  Jason Molenda  (jsm@bugshack.cygnus.com)

        * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
        'do-doc'.

2000-02-15  Kevin Buettner  <kevinb@redhat.com>

        Changes for AIX 4.3:
        * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
        to correct value for generic dummy frames.  When using
        generic dummy frames, don't attempt to write TOC value or
        function to call into the call dummy.
        (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
        code to also handle the PowerOpen ABI.
        (ppc_push_return_address): Enable for all ports.
        * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
        PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER, 
        CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
        CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
        provided by generic RS6000 definitions so that call dummies
        are implemented using generic dummy frames instead.

        * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
        prior to changing the stack pointer via ptrace().  Also, ignore
        attempts to store to undefined registers that are less than
        NUM_REGS.

        * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
        frame from 436 to 448 to account for alignment padding.
        (rs6000_push_arguments): Obtain actual register size instead
        of assuming the register is 4 bytes long.  [There's still
        more work to be done to totally remove the 4 byte assumption,
        however.]  Make sure the stack is 16 byte aligned as required
        by the PowerOpen ABI.  Also, make sure that small structures
        passed in registers are properly aligned within the register.

2000-02-15  Jesper Skov  <jskov@cygnus.co.uk>

        Patch applied by Kevin Buettner <kevinb@redhat.com>
        
        * rs6000-tdep.c (skip_prologue): skip copying of argument
        registers to local variable registers.

2000-02-14  Jim Kingdon  <kingdon@redhat.com>

        * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale.  A
        sym->section->index number is not a SECT_OFF_* code.

Tue Feb 15 12:07:30 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS (write after approval): Add H.J. Lu.

2000-02-14  Nick Clifton  <nickc@cygnus.com>

        * sh-tdep.c: Remove extraneous code.

2000-02-14  Amit S. Kale  <akale@veritas.com>

        * elfread.c (elf_symtab_read): Move the use of sym to after where
        it is set.
        Checked in by Jim Kingdon  <kingdon@redhat.com>

Mon Feb 14 15:39:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.

Mon Feb 14 15:20:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
        * dwarf2read.c: (die_is_declaration): New fn.
        (read_structure_scope): Use it.

        * dwarf2read.c: (die_is_declaration): Convert to ISO-C.

2000-02-10  J.T. Conklin  <jtc@redback.com>

        * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
        * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
        configdirs.
        * gdbserver/low-nbsd.c: New file.
        
        * gdbserver/Makefile.in: convert to autoconf.
        * gdbserver/configure.in: likewise.
        * gdbserver/configure: generate.

Sun Feb 13 11:21:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * CONTRIBUTE: New file.  How to contribute to GDB.

Sun Feb 13 10:34:48 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners.  Add Kevin
        Buettner to powerpc maintainers.  Make Kevin Buettner the
        GNU/LINUX PPC native maintainer.  Add J.T. Conklin, Jim Kingdon
        and Jason Molenda to write after aproval list.

Sun Feb 13 10:18:44 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: Reformat.  Separate into check-in categories.

Sat Feb 12 01:08:21 EST 2000  Nicholas Duffek <nsd@cygnus.com>

        * uw-thread.c: Remove __FUNCTION__ GNUism.

2000-01-17  Amit S. Kale  <akale@veritas.com>

        * elfread.c (elf_symtab_read): Use offset for the section in which a
        symbol resides, instead of .text section for calculating address of a
        symbol.
        Checked in by Jim Kingdon  <kingdon@redhat.com>

2000-02-10  Mark Kettenis  <kettenis@gnu.org>

        * gnu-nat.c: Remove hackery to include <bits/waitflags.h>.  It is
        no longer necessary now we have gdb_wait.h.

2000-02-09  Mark Kettenis  <kettenis@gnu.org>

        * gnu-nat.c (proc_string): Make global.
        (do_mach_notify_dead_name): Suppress dead name notifications if we
        know that the task is dead.

1999-12-13  Mark Kettenis  <kettenis@gnu.org>

        * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
        instead of directly from the kernel.  Add some hackery to make
        sure that the info isn't influenced by suspension of the task in
        the proc server itself.

2000-02-10  Jim Kingdon  <kingdon@redhat.com>

        * defs.h (MERGEPID): Added.  Patch submitted by Andrew Hobson and
        approved by Michael Snyder.

2000-02-09  Mark Kettenis  <kettenis@gnu.org>

        * linux-thread.c: Include defs.h before gdb_wait.h.

Wed Feb  9 18:59:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (wait_h): Delete macro.  Update all dependencies
        specifying gdb_wait.h instead.

        * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
        remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
        remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
        convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
        remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
        remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
        remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
        ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
        infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
        fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
        or <sys/wait.h>.
        * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.

        * gdb_wait.h: New file.  Based on ../include/wait.h. Include
        <sys/wait.h> or <wait.h> and then define any missing WIF macros.

Wed Feb  9 01:14:54 2000  Andrew Cagney  <cagney@amy.cygnus.com>

        * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
        * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
        (d10v_stack_align): Declare.
        * d10v-tdep.c (d10v_stack_align): Define.

1999-08-23  J.T. Conklin  <jtc@redback.com>

        * top.c (remote_timeout): Change default to 2.  Add comment
        explaining history of changes to the default value.
        * remote.c (_initialize_remote): Remove code that adds set/
        show remotetimeout, as that's also done in top.c

1999-10-18  J.T. Conklin  <jtc@redback.com>

        * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
        Return E01 instead of P01 when 'P' command fails.

2000-02-05  J.T. Conklin  <jtc@redback.com>

        * remote.c (putpkt_binary): Handle NAK from target stub.

2000-02-08  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * configure.in: Remove the addition of sol-thread.c to the
        CONFIG_INITS list. This caused problems with init.c, because
        sol-thread.c would be grepped twice for _initialize_* functions.
        * configure: Ditto.
        * Makefile.in: Add FIXME for init.c.

2000-02-07  Jim Kingdon  <kingdon@redhat.com>

        Clean up compiler warnings:
        * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
        stack.c, valprint.c: Change variables to unsigned.
        * bcache.c: Rearrange to avoid warnings about variables not being set.
        * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
        rather than declaring print_max and repeat_count_threashold
        ourselves (incorrectly).
        * valprint.h: Do declare repeat_count_threashold.
        * ch-exp.c: Use default case for internal error.
        * findvar.c: Don't omit argument type.
        * symtab.c: Remove unused variable.

2000-02-04  Jim Blandy  <jimb@redhat.com>

        * c-typeprint.c (remove_qualifiers): New function.
        (c_type_print_base): Use it to remove qualifiers from C++
        qualified names, not strrchr.

        * c-typeprint.c (c_type_print_base): Recognize type conversion
        operators by calling is_type_conversion_operator.
        (is_type_conversion_operator): New function.

2000-02-04  Nick Clifton  <nickc@cygnus.com>

        * config/arm/tm-arm.h (LOWEST_PC): Define.

2000-02-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * infrun.c (resume): Make just one call to target_resume(), instead
        of four: set up correct parameters in all the cases ahead of time,
        and do call at the end.

2000-02-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * config/powerpc/tm-ppc-eabi.h: Define
        SOFUN_ADDRESS_MAYBE_MISSING.

2000-02-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
        frames (revisited).

Fri Feb  4 22:42:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (INIT_FILES): Append CONFIG_INITS
        * configure.in (CONFIG_INIT): Initialize.
        (links): Link srcdir/gdbtk/library to gdbtcl2.
        * gdbtcl2: Moved to gdbtk/library.
        ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
        gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
        gdbtk.h: Moved to gdbtk/generic.

2000-02-03  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * printcmd.c (build_address_symbolic): New function. Returns all
        the parts that are necessary to print an address in a symbolic
        form.
        (print_address_symbolic): Split into a printing part and an
        information building part, build_address_symbolic().

        * defs.h (build_address_symbolic): Export.

2000-02-03  Jim Blandy  <jimb@redhat.com>

        * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
        opcode.

2000-02-02  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * arm-tdep.c (arm_push_arguments): Fix passing of floating point
        arguments on dummy frames.

2000-02-02  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
        (arm_pop_frame): Account fr dummy frames (as opposed to real ones).

2000-02-01  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * remote.c (getpkt_sane): New function. It is the old getpkt(),
        which now returns a timeout indication.
        (getpkt): New function. Wrapper for getpkt_sane(), so that return
        value can still be ignored.

Tue Feb  1 18:47:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
        UI_OUT.

Tue Feb  1 00:17:12 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c.  Rename
        ``struct gdb_file'' to ``struct ui_file''.  Delete typedef
        GDB_FILE.
        
        * Makefile.in: Update.

        * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
        c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
        ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
        cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
        expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
        frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
        gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
        jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
        m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
        printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
        remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
        ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
        serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
        target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
        utils.c, v850ice.c, valprint.c, valprint.h, value.h,
        config/pa/tm-hppa.h: Update.
        * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.

2000-01-31  Jason Molenda  (jsm@bugshack.cygnus.com)

        * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
        config/i386/i386dgux.mh, config/i386/i386sol2.mh,
        config/i386/i386v4.mh, config/i386/i386v42mp.mh,
        config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
        config/m88k/delta88v4.mh, config/mips/irix4.mh,
        config/mips/irix5.mh, config/mips/mipsv4.mh,
        config/powerpc/solaris.mh (NATDEPFILES): Change references to
        proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
        proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.

Mon Jan 31 17:14:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.

        * main.c (captured_main): Only use the legacy tui_file code when
        linking in older code such as the TUI.

        * gdb-file.h, gdb-file.c: New files.
        * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
        null_file_isatty, null_file_rewind, null_file_put,
        null_file_flush, null_file_write, null_file_fputs,
        null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
        gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
        set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
        set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
        set_gdb_file_data, struct accumulated_gdb_file,
        do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
        mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
        mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
        stdio_file_delete, stdio_file_flush, stdio_file_write,
        stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
        Moved to gdb-file.h and gdb-file.c.
        * utils.c (enum streamtype, struct tui_stream, tui_file_new,
        tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
        tui_file_rewind, tui_file_put, tui_file_fputs,
        tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
        fputs_unfiltered_hook):
        Moved to tui/tui-file.c and tui/tui-file.h.
        
        * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
        (tui-file.o, gdb-file.o): Add dependencies.
        (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
        * main.c: #include tui/tui-file.h.

2000-01-28  Fred Fish  <fnf@cygnus.com>

        * findvar.c (value_from_register): Special case handling of D10V
        pointer values fetched from registers.

2000-01-28  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
        support for new style thumb prologues.

2000-01-28  Nick Clifton  <nickc@redhat.com>

        * arm-tdep.c: Remove extraneous dash at start of strings
        introduced in previous delta.

2000-01-27  Nick Clifton  <nickc@redhat.com>

        * arm-tdep.c: Replace uses of arm_toggle_renames() with
        parse_arm_disassembler_option().

2000-01-27  Jim Blandy  <jimb@cygnus.com>

        * symtab.c (decode_line_1): Don't let commas that are within
        quotes or parenthesis terminate the line spec.  Don't use pp when
        removing the final double quote of a double-quoted string.  Don't
        forget to skip the opening double quote.  I have no clue whether
        this change is correct; probably we've just moved this function
        from one buggy place to another buggy place, and never came within
        an outhouse whiff of correctness.
        (find_toplevel_char): New function.

2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
        passing the pointer to a thumb function as an argument.

2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
        are reinserted for another run.

2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * cli-out.c (cli_filed_string): Test for NULL string.

2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * infcmd.c (run_stack_dummy): Account for a random signal stopping
        the inferior as well as breakpoints being hit while performing an
        inferior function call.
        * valops.c (hand_function_call): Ditto.

2000-01-27  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        From  Mark Kettenis  <kettenis@gnu.org>

        * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
        i386_REGS_SEGS_STATE.
        (HAVE_I387_REGS): Define.
        (FLOAT_INFO): Remove.
        * i386gnu-nat.c: Almost completely rewritten to use new i386
        register layout and `float info' implementation.
        * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
        Move prototypes from here.
        * gnu-nat.h: To here.

2000-01-24  Kevin Buettner  <kevinb@redhat.com>

        * utils.c (get_field, put_field): Fix buffer underruns and
        overruns.  Also, handle case where total_len is not evenly
        divisible by 8.
        (getfield): Make sure zeroing of unwanted bits occurs even
        when bit field to extract does not straddle two or more
        bytes.

2000-01-23   Christopher Faylor  <cgf@cygnus.com>

        * defs.h: Add gdb_thread_select declaration.

2000-01-23  Kevin Buettner  <kevinb@redhat.com>

        * linux-thread.c (_initialize_linuxthreads): Make sure that
        linuxthreads_block_mask does not block SIGCHLD.

2000-01-20  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
        text so that new lines work properly.

2000-01-18  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * proc-utils.h: New file. Export functions from proc-*.c.

        * proc_api.c: Rename to:
        * proc-api.c: New file. Add include of proc-utils.h.

        * proc_events.c: Rename to:
        * proc-events.c: New file.

        * proc_flags.c: Rename to:
        * proc-flags.c: New file.

        * proc_why.c: Rename to:
        * proc-why.c: New file. Add include of proc-utils.h.

        * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
        ctype.h, proc-utils.h.
        (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
        (open_procinfo_files): Conditionalize local variable tmp, to avoid
        compiler warnings.
        (proc_iterate_over_mappings): Conditionalize local vars mapfd and
        pathname.
        (procfs_wait): Adjust format in some printf_filetered calls to
        avoid compiler warnings.
        (make_signal_thread_runnable): Ifdef 0. The calls to this function
        are also ifdef'd 0 .
        (procfs_resume): Add parentheses around '&&' operation.
        (procfs_set_exec_trap): Remove unused variable.
        (info_proc_cmd): Add braces to avoid ambiguous else clause.

        * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
        proc-why.o): Update dependencies.

        * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
        proc-*.o.

2000-01-17  Jason Molenda  (jsm@bugshack.cygnus.com)

        * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
        Fix from Robert Lipe <robertl@sco.com>.
        * configure: Regenerated.

2000-01-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * stack.c (print_frame_info_base): Break up into the frame info
        (location) printing part and the rest (source line printing).
        (print_frame): New function. Take care of printing the location
        information.
        Update copyright.

        * infrun.c (normal_stop): Use enum values rather than integers for the
        source_flag to be passed to show_and_print_stack_frame().
        Update copyright.
        
        * frame.h (print_what): New enum for 'source' argument to
        print_frame_info_base(). Use this instead of obscure numbers.
        Update copyright.
        
Sun Jan 16 17:58:00 2000  David Taylor  <taylor@texas.cygnus.com>

        * event-top.c (stdin_event_handler): call quit_command rather than
        exit -- run cleanups, give target code a chance to say goodbye to
        the target.  Fixes bug where the inferior processes were left
        around on Solaris (and probably elsewhere) by the testsuite.

2000-01-14  Mark Salter  <msalter@cygnus.com>

        * v850-tdep.c (v850_target_architecture_hook): Setup correct
        machine id for disassembly.

2000-01-13  Jim Blandy  <jimb@cygnus.com>

        * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
        convert_to_regset, when regno indicates a specific register.

Thu Jan 13 23:34:17 EST 2000  Nicholas Duffek <nsd@cygnus.com>

        * uw-thread.c: Document libthread.so debugging interface.  Minor
        comment and formatting tweaks.
        (DEBUG): #define as 0 instead of 1.
        (CALL_BASE): Include function name in error msg.
        (libthread_stub): Adjust inferior_pid after thread exit.
        (uw_thread_create_inferior): Deactivate uw_thread_ops before
        asking procfs_ops to create inferior.
        (libthread_init): Don't return nonlocally on error.

2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * rdi-share/ardi.c (negotiate_params): Fix initialization of static
        variable.

2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
        both sides are on the same state.

2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
        115200 (minor syntax mistake).

2000-01-12  Jim Blandy  <jimb@cygnus.com>

        * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
        this here, to go along with the definitions of PIDGET and TIDGET.

2000-01-12  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * thread.c (do_captured_thread_select): New function. Switch
        current thread, safely from within catch_errors().
        (gdb_thread_select): New function. Switch threads safely.
        (thread_command): Use gdb_thread_select().
        Include ui-out.h.
        (do_captured_list_thread_ids): New function.
        (gdb_list_thread_ids): New function.

        * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.

2000-01-11  Christopher Faylor <cgf@cygnus.com>

        * configure.in: Avoid linking -limagehlp unless it's a native build.
        * configure: Regenerate.
        * thread.cc (add_thread): Clear private data pointer here or suffer
        strange behavior when it is checked for NULL later.

2000-01-09  Christopher Faylor  <cgf@cygnus.com>

        * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
        * configure.in: Add an additional library to cygwin link.
        * configure: Regenerate.

        Patch from Egor Duda <deo@logos-m.ru>:
        * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
        type.

2000-01-07  Michael Snyder  <msnyder@cygnus.com>

        * uw-thread.c: New file to support UnixWare user-mode threads:
        contributed by Nickolas Duffek  <nsd@cygnus.com>.
        * target.h (struct target_ops): New vector, to_extra_thread_info,
        allows back-ends to give extra details in info thread display.
        (target_extra_thread_info): define new macro.
        (target_find_new_threads): simplify macro.  Cleanup comments.
        * target.c (to_extra_thread_info): default and inherit new vector.
        (cleanup_target): eliminate PARAMS, break up long lines,
        provide default definition for to_extra_thread_info, and
        to_find_new_threads.  Default to_thread_alive and to_query
        to return_zero, not target_ignore (they each return int not void).
        (debug_to_find_new_threads): new debug entry.
        (setup_target_debug): add debug_to_find_new_threads.
        * gdbthread.h: export struct thread_info, find_thread_pid, and
        iterate_over_threads.  Add comments.  Eliminate PARAMS.  Update
        copyright.  Add new private data pointer for use by target back-ends.
        * thread.c (struct thread_info): move definition to gdbthread.h.
        (find_thread_pid): new exported function for thread lookup.
        (iterate_over_threads): new exported function for applying
        arbitrary operations to threads.  Update copyright to 2000.
        (info_threads_command): use new target_extra_thread_info vector
        to display extra information about each thread (if implemented).
        * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
        Add defines for PIDGET, etc.
        * config/i386/tm-i386sol2.h: ditto.
        * config/sparc/tm-sun4sol2.h: ditto.
        * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
        * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
        if -lpthread and -lpthreads fail.

        * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
        (proc_flags): combine flags that UnixWare splits into two locations.
        (proc_modify_flag): add support for PR_KLC (kill on last close).
        (proc_[un]set_kill_on_last_close): new functions.
        
2000-01-07  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * infrun.c (normal_stop): Print out thread id when we stop.

2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * remote.c (remote_open_1): Fix message so it does not imply a
        specific syntax for serial ports, as it is OS dependent.
        (remote_async_open_1): Ibid.
        (init_remote_ops): Ibid.

2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
        "set remotebaud" command (if set) when no speed is specified on
        the "target rdi" command.

2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
        115200.
        (baud_options[]): Ibid.

2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
        used by each operating system.

2000-01-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * breakpoint.c (until_break_command): Add an argument for the
        continuation, the beginning of the cleanups set up by this
        command.
        (until_break_command_continuation): Do cleanups until the one
        passed in as argument instead of doing all of them.

        * infcmd.c (finish_command_continuation): Expect a new argument,
        which indicates up to where to do cleanups. Update calls to
        do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
        (finish_command): Add another argument for the continuation: the
        starting cleanup for this command.

2000-01-05  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        From Grant Edwards <grante@visi.com> (original patch from Thomas
        Zenker ):
        * rdi-share/ardi.c: Allow interruption of interruptible
        targets with a <CNTL-C>.

2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
        to control port to accommodate some versions of Angel.

2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
        Add interpretation for C Support Library packets.

2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
        is now being modified.
        * rdi-share/devsw.h: Adjust declaration of the above funtion.

For older changes see ChangeLog-99
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: