1 2009-05-11 Pierre Muller <muller.u-strasbg.fr>
5 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
6 (target_stoppped_by_watchpoint): New macro.
7 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
8 (target_have_steppable_watchpoint): New macro.
9 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
10 (target_have_continuable_watchpoint): New macro.
11 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
12 (target_can_use_hardware_watchpoint): New macro.
13 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
14 (target_region_ok_for_hw_watchpoint): New macro.
16 * breakpoint.c (update_watchpoint): Use new macros.
17 (bpstat_alloc): Likewise.
18 (create_breakpoint): Likewise.
19 (watch_command_1): Likewise.
20 (can_use_hardware_watchpoint): Likewise.
21 (do_enable_breakpoint): Likewise.
22 * infrun.c (handle_inferior_event): Adapt to new macros.
23 * mips-tdep.c (mips_gdbarch_init): Update comments.
24 * procfs.c (procfs_set_watchpoint): Update comment.
25 (procfs_insert_watchpoint): Adapt to new macros.
26 * remote-m32r-sdi.c (m32r_stop):
27 * remote-mips.c (mips_remove_breakpoint):
28 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
29 (debug_to_stopped_by_watchpoint): Likewise.
32 2009-05-10 Pierre Muller <muller.u-strasbg.fr>
34 * src/gdb/target.h: Remove all tests for already defined
35 macros. All macros defined here should not be set in config
38 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
40 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
41 (have_ptrace_getsetfpregs): Likewise.
42 fetch_all_gp_regs): New function.
43 (fetch_gp_regs): New function.
44 (fetch_all_fp_regs): Likewise.
45 (fetch_fp_regs): New function.
46 (fetch_ppc_registers): Using the new methods to fetch general-
47 purpose and floating-pointer registers.
48 (store_all_gp_regs): New function.
49 (store_gp_regs): Likewise.
50 (store_all_fp_regs): New function.
51 (store_fp_regs): Likewise.
52 (store_ppc_registers): Using the new methods to store general-
53 purpose and floating-pointer registers.
55 2009-05-08 Doug Evans <dje@google.com>
57 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
59 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
61 * MAINTAINERS (Write After Approval): Add self.
63 2009-05-07 Joel Brobecker <brobecker@adacore.com>
65 * gdbarch.h (target_gdbarch): Add comment documenting this global.
67 2009-05-06 Joel Brobecker <brobecker@adacore.com>
69 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
71 * configure: Regenerate.
73 2009-05-06 Joel Brobecker <brobecker@adacore.com>
75 * utils.c: Add include of gdb_usleep.h.
76 (defaulted_query): Detect false EOF conditions that happen
77 on terminals opened with the O_NONBLOCK flag when there is
80 2009-05-06 Pedro Alves <pedro@codesourcery.com>
82 * inferior.c (add_inferior): Move observer_notify_new_inferior
84 (add_inferior_silent): ... here.
86 2009-05-06 Pierre Muller <muller.u-strasbg.fr>
87 Pedro Alves <pedro@codesourcery.com>
89 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
90 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
92 (procfs_stopped_by_watchpoint): Made static, ptid argument
94 (_initialize_procfs): Register new watchpoint related target
96 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
97 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
98 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
99 (target_insert_watchpoint, target_remove_watchpoint): Delete.
100 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
102 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
103 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
104 (target_insert_watchpoint, target_remove_watchpoint): Delete.
105 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
107 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
108 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
109 (target_insert_watchpoint, target_remove_watchpoint): Delete.
110 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
113 2009-05-06 Hui Zhu <teawater@gmail.com>
115 * i386-tdep.c (i386_process_record): Change bzero to memset.
117 2009-05-06 Hui Zhu <teawater@gmail.com>
119 * NEWS: Add item for process record and replay.
121 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
123 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
125 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
127 * inferior.h (read_pc, write_pc): Remove.
128 * regcache.c (read_pc, write_pc): Remove.
130 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
132 (handle_inferior_event): Use regcache_read_pc instead of read_pc
133 when determining value of stop_pc. Replace subsequent uses of
134 read_pc by inspecting already-retrieved stop_pc value.
135 (keep_going): Use regcache_read_pc instead of read_pc.
137 * breakpoint.c (watchpoint_check): Use current frame architecture
138 and PC instead of current_gdbarch and read_pc ().
139 * tracepoint.c (set_traceframe_context): Replace PC argument
141 (trace_start_command, finish_tfind_command): Update calls.
142 (finish_tfind_command): Compare frame IDs to identify transitions
144 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
145 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
146 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
147 of read_pc and write_pc.
148 (store_register): Make regcache argument non-const. Update call
149 to exec_one_dummy_insn.
151 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
152 * infcmd.c (post_create_inferior): Likewise.
153 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
154 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
155 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
156 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
157 * linux-fork.c (fork_load_infrun_state): Likewise.
158 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
159 * record.c (record_wait): Likewise.
160 * procfs.c (procfs_wait): Likewise.
161 * remote-mips.c (common_open, mips_wait): Likewise.
162 * remote-m32r-sdi.c (m32r_resume): Likewise.
164 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
165 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
166 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
167 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
168 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
170 * solib-darwin.c: Include "regcache.h".
171 * solib-pa64.c: Include "regcache.h".
172 * solib-svr4.c: Include "regcache.h.".
174 * symfile.c: Do not mention read_pc or write_pc in comments.
175 * dink32-rom.c: Likewise.
176 * m32r-rom.c: Likewise.
177 * mips-tdep.c: Likewise.
179 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
181 * fork-child.c (startup_inferior): Move setting stop_pc ...
182 * infcmd.c (post_create_inferior): ... to here.
184 2009-05-04 Michael Snyder <msnyder@vmware.com>
186 * NEWS: Add item for reverse debugging commands.
188 2009-05-04 Pedro Alves <pedro@codesourcery.com>
190 * go32-nat.c (go32_stop): Delete.
191 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
192 (go32_create_inferior): Don't call go32_stop or
194 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
196 (init_go32_ops): Don't register go32_stop.
198 2009-05-02 Eli Zaretskii <eliz@gnu.org>
200 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
203 * infcall.c (find_function_addr): Avoid compiler warnings for
206 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
208 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
209 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
211 2009-05-01 Doug Evans <dje@google.com>
213 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
216 2009-05-01 Eli Zaretskii <eliz@gnu.org>
218 * record.c (_initialize_record): Reformat and clarify doc strings
219 for stop-at-limit and insn-number-max.
221 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
223 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
225 Make specifiable the make_function_type type memory ownership.
226 * gdbtypes.c (make_function_type): New parameter `objfile', use it
227 explicitely instead of TYPE-initialized removed local variable
228 `objfile'. Describe `objfile' it in the function comment.
229 (lookup_function_type): Update make_function_type callers.
230 * gdbtypes.h (make_function_type): Update the prototype.
231 * jv-lang.c (java_link_class_type): Update make_function_type callers.
232 * dwarf2read.c (read_subroutine_type): Likewise.
233 * stabsread.c (read_type): Likewise.
235 2009-05-01 Eli Zaretskii <eliz@gnu.org>
237 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
238 printing a bogus "Thread <main>".
239 (go32_thread_alive): Don't return 1 for null_ptid.
241 * i386-tdep.c (i386_go32_init_abi): Override the number of
242 registers due to non-support of SSE.
244 2009-04-30 Anthony Green <green@moxielogic.com>
246 * configure.tgt: Link the moxie simulator in with gdb.
248 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
250 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
253 2009-04-30 Hui Zhu <teawater@gmail.com>
254 Michael Snyder <msnyder@vmware.com>
256 I386 Linux process record and replay support.
258 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
259 This struct has the argument for the function
260 "record_linux_system_call".
261 (i386_linux_intx80_sysenter_record): New function. Parse the
262 system call instruction and call function
263 "record_linux_system_call" to record execute log.
264 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
265 Set "i386_linux_intx80_sysenter_record" to
266 "i386_intx80_record" and "i386_sysenter_record".
268 2009-04-30 Hui Zhu <teawater@gmail.com>
269 Michael Snyder <msnyder@vmware.com>
271 I386 architecture process record and replay support.
273 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
274 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
276 (aflag, dflag, override, modrm, mod, reg, rm, ot,
277 i386_record_pc): New variables. Ditto.
278 (i386_record_modrm, i386_record_lea_modrm_addr,
279 i386_record_lea_modrm): New functions. Ditto.
280 (i386_process_record): New function. Parse the instruction in
281 address "addr" and record the values of registers and memory
282 that will be changed by this instruction.
283 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
284 "process_record" interface.
285 * i386-tdep.h (gdbarch_tdep): New function pointers
286 "i386_intx80_record" and "i386_sysenter_record" that point to
287 the function that can record "intx80" and "sysenter" execute
290 2009-04-30 Hui Zhu <teawater@gmail.com>
291 Michael Snyder <msnyder@vmware.com>
293 * infrun.c (use_displaced_stepping): Return false if process
294 record and replay target is used.
295 (proceed): Call function "record_not_record_set" if pocess
296 record and replay target is used.
298 2009-04-30 Hui Zhu <teawater@gmail.com>
299 Michael Snyder <msnyder@vmware.com>
301 Linux process record and replay support.
303 * Makefile.in (ALLDEPFILES): Add linux-record.c.
304 (ALL_TARGET_OBS): Add linux-record.o.
305 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
306 (i[34567]86-*-linux*): Add linux-record.o.
307 * linux-record.c, linux-record.h: New file.
309 2009-04-30 Hui Zhu <teawater@gmail.com>
310 Michael Snyder <msnyder@vmware.com>
312 Process record and replay target.
314 * Makefile.in (SFILES): Add record.c.
315 (COMMON_OBS): Add record.o.
316 * record.c, record.h: New file.
318 2009-04-30 Hui Zhu <teawater@gmail.com>
319 Michael Snyder <msnyder@vmware.com>
321 * target.h (strata): New stratum "record_stratum".
323 2009-04-30 Hui Zhu <teawater@gmail.com>
324 Michael Snyder <msnyder@vmware.com>
326 GDBARCH interface for process record and replay.
328 * gdbarch.sh (process_record): This interface point to the
329 function that records the inferior execute log.
331 2009-04-29 Doug Evans <dje@google.com>
333 * i386-nat.c (child_post_startup_inferior): Delete, unused.
335 2009-04-29 Pedro Alves <pedro@codesourcery.com>
337 * breakpoint.c (print_exception_catchpoint): Access `b' directly
338 instead of `b->loc->owner'.
339 (print_mention_exception_catchpoint): Ditto.
341 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
343 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
345 2009-04-27 Tom Tromey <tromey@redhat.com>
347 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
349 2009-04-27 Jerome Guitton <guitton@adacore.com>
351 * symtab.c (append_exact_match_to_sals): New function, extracted
352 from expand_line_sal.
353 (expand_line_sal): Use append_exact_match_to_sals to append exact
354 matches. If none found, append all best items.
356 2009-04-27 Jerome Guitton <guitton@adacore.com>
358 * main.c (captured_main): Move gdbinit lookups after gdb_init.
360 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
363 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
364 (read_func_scope): Call inherit_abstract_dies.
366 2009-04-25 Eli Zaretskii <eliz@gnu.org>
368 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
369 sparc-sol2-nat.c and sparc-sol2-tdep.c.
371 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
373 2009-04-24 Pierre Muller <muller.u-strasbg.fr>
375 ARI change: Use "/* ARI: rule */" pattern.
376 * utils.c: Update ARI patterns.
377 * gdb_dirent.h: Likewise.
379 2009-04-23 Anthony Green <green@moxielogic.com>
381 * MAINTAINERS: Add moxie target.
382 * configure.tgt: Add moxie-*-elf target.
383 * moxie-tdep.c: New file.
384 * moxie-tdep.h: New file.
386 2009-04-23 Joel Brobecker <brobecker@adacore.com>
388 * ada-lang.c: Remove an extra empty line. No code change.
390 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
392 Fix double free on error inserting the breakpoint instruction.
393 * breakpoint.c (create_breakpoints): Move the
394 update_global_location_list call to ...
395 (break_command_really): ... here together with the second local call
396 both unified after all the cleanups.
398 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
399 Tom Tromey <tromey@redhat.com>
401 * configure, config.in: Regenerate.
402 * configure.ac: Support for relocatable GDB datadir. Use
403 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
404 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
405 * top.c (init_main): Add "set data-directory".
406 * defs.h (gdb_datadir): Declare.
407 * main.c (gdb_datadir): New global.
408 (captured_main): Initialize gdb_datadir. Use relocate_directory.
409 (relocate_path): New function.
410 (relocate_directory): Likewise.
411 (get_init_files): Use relocate_path.
412 (README): Mention --with-gdb-datadir.
414 2009-04-23 Joel Brobecker <brobecker@adacore.com>
416 * ada-tasks (task_command_1): Call target_find_new_threads.
418 2009-04-23 Joel Brobecker <brobecker@adacore.com>
420 * stack.c (do_gdb_disassembly): Print the exception message if an
421 error was thrown while trying to perform the disassembly.
423 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
425 * varobj.c (free_variable): Replace free_current_contents by xfree.
427 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
429 * arm-linux-nat.c (fetch_register, store_register): Use
430 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
431 * arm-linux-tdep.c (arm_linux_supply_gregset,
432 arm_linux_collect_gregset): Likewise.
433 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
434 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
436 2009-04-22 Hui Zhu <teawater@gmail.com>
438 * stack.c (_initialize_stack): Set the default of
439 disassemble-next-line to off.
441 2009-04-21 Tom Tromey <tromey@redhat.com>
443 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
444 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
446 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
448 * configure.ac: Add quotes to not lose brackets in help text.
449 * configure: Rebuild.
451 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
453 * configure.ac: Don't postprocess Makefile in config.status.
454 Substitute GDB_NM_FILE. Don't substitute nm_h.
455 * Makefile.in (GDB_NM_FILE): Substitute.
456 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
457 * configure: Regenerate.
458 * gnulib/Makefile.in: Regenerate.
460 2009-04-21 Joseph Myers <joseph@codesourcery.com>
462 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
463 --with-htmldir): New.
464 * configure: Regenerate.
466 2009-04-21 Tom Tromey <tromey@redhat.com>
468 * configure: Rebuild.
469 * configure.ac: Use lower case for start of help strings. Clean
470 up --with-sysroot help.
472 2009-04-21 Tom Tromey <tromey@redhat.com>
474 * configure: Rebuild.
475 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
476 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
479 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
481 ARI fix: remove "%p".
482 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
483 (ia64_sigtramp_frame_this_id): Ditto.
484 (ia64_libunwind_frame_this_id): Ditto.
485 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
486 * symmisc.c (maintenance_info_psymtabs): Ditto.
488 2009-04-21 Joseph Myers <joseph@codesourcery.com>
490 * configure.ac (--with-relocated-sources): New.
491 * configure, config.in: Regenerate.
492 * source.c (add_substitute_path_rule): Remove static.
493 * source.h (add_substitute_path_rule): Declare.
494 * main.c: Include "source.h".
495 (captured_main): Add substitution rule if RELOC_SRCDIR.
497 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
499 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
501 2009-04-20 David Daney <ddaney@caviumnetworks.com>
503 * NEWS: Mention MIPS/Linux hardware watchpoint support.
505 2009-04-20 David Daney <ddaney@caviumnetworks.com>
507 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
508 (maint_show_dr, super_close): New variables.
509 (super_fetch_registers, super_store_registers): Make static.
510 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
511 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
512 (pt_watch_style): Define new enum.
513 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
515 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
517 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
518 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
519 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
520 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
521 (type_to_irw, fill_mask, try_one_watch)
522 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
523 (mips_linux_new_thread, populate_regs_from_watches)
524 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
525 (mips_linux_close): New functions.
526 (_initialize_mips_linux_nat): Register watchpoint functions with
527 the target_ops. Add show-debug-regs maintenance command.
529 2009-04-20 David Daney <ddaney@caviumnetworks.com>
531 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
533 2009-04-19 Pedro Alves <pedro@codesourcery.com>
535 * NEWS: Mention gdbserver support for x86 Windows CE.
537 2009-04-19 Eli Zaretskii <eliz@gnu.org>
539 * config/djgpp/fnchange.lst: Fix typos.
541 Set default host and target charsets in the DJGPP port.
543 * config/djgpp/config.sed (am_cv_langinfo_codeset)
544 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
545 in all configure scripts that define ac_cv_env_CPP_value.
547 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
550 * config/djgpp/nl_types.h: New file.
552 * config/djgpp/langinfo.h: New file.
554 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
556 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
558 * Makefile.in (MAKEHTML): Set to makeinfo --html.
559 (MAKEHTMLFLAGS): Set to empty.
561 2009-04-18 Eli Zaretskii <eliz@gnu.org>
563 * NEWS: Mention all new set/show commands added since GDB 6.8 was
566 * go32-nat.c (go32_sysinfo): Check if the call to
567 __dpmi_get_capabilities fills the buffer with information, and
568 don't use the buffer if not.
570 2009-04-17 Tom Tromey <tromey@redhat.com>
572 * charset.c (_initialize_charset): Add special case for "646".
574 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
576 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
577 * configure: Regenerate.
578 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
579 configure substitutions.
580 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
582 2009-04-17 Pierre Muller <muller.u-strasbg.fr>
584 ARI fix: Do not use %p, replace by call to host_address_to_string
586 * darwin-nat.c (darwin_xfer_partial): Apply change.
587 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
588 * gnu-nat.h (proc_debug): Ditto.
589 * symmisc.c (maintenance_info_symtabs): Ditto.
590 (maintenance_info_psymtabs): Ditto.
591 * windows-nat.c (handle_load_dll): Ditto.
592 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
593 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
595 2009-04-17 Joseph Myers <joseph@codesourcery.com>
597 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
599 (sparc-*-linux*): Likewise.
601 2009-04-17 Eli Zaretskii <eliz@gnu.org>
603 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
606 2009-04-16 Pedro Alves <pedro@codesourcery.com>
608 * remote.c (remote_query_attached): Fix pasto in packet_ok result
611 2009-04-16 Joel Brobecker <brobecker@adacore.com>
613 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
614 Revert the previous change. Might not be correct, actually.
616 2009-04-16 Joel Brobecker <brobecker@adacore.com>
618 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
619 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
620 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
621 Remove declaration. These are non-existent functions.
623 2009-04-16 Joel Brobecker <brobecker@adacore.com>
625 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
626 Fix a compilation warning on mips-irix due to casting from
627 a pointer of different size.
629 2009-04-16 Joel Brobecker <brobecker@adacore.com>
631 * ada-lang.c (symtab_for_sym): Delete.
632 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
634 2009-04-16 Joel Brobecker <brobecker@adacore.com>
636 * ada-lang.c (extract_string): Delete.
637 (ada_main_name): Reimplement using target_read_string instead of
640 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
642 * m68klinux-nat.c: Remove obsolete comment.
643 (fetch_register, store_register): Don't call
644 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
645 which are always nops here.
647 2009-04-14 Tom Tromey <tromey@redhat.com>
649 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
650 (c_printstr): Likewise.
651 * charset.c: Include gdb_wait.h.
652 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
653 (find_charset_names): Use pexecute. Handle libiconv's output.
655 (_initialize_charset): Use xstrdup.
656 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
658 (INTERMEDIATE_ENCODING): New define.
659 * configure, config.in: Rebuild.
660 * configure.ac: Check for btowc.
662 2009-04-15 Tom Tromey <tromey@redhat.com>
664 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
666 2009-04-15 Eli Zaretskii <eliz@gnu.org>
668 * utils.c (parse_escape): Initialize target_char to pacify GCC.
670 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
672 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
674 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
676 ARI fix: sprintf rule.
677 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
678 * ada-lang.c (add_angle_brackets): Use xstrprintf.
679 (ada_decode): Replace sprintf by xsnprintf.
680 (find_old_style_renaming_symbol): Ditto.
681 (ada_to_fixed_type_1, ada_enum_name): Ditto.
684 2009-04-14 Joel Brobecker <brobecker@adacore.com>
686 * target.c (target_mourn_inferior): Call bfd_cache_close_all
687 after having executed the target mourn_inferior routine.
689 2009-04-14 Eli Zaretskii <eliz@gnu.org>
691 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
694 2009-04-13 David Daney <ddaney@caviumnetworks.com>
696 * infrun.c (maybe_software_singlestep): New function.
697 (resume): Call maybe_software_singlestep.
698 (handle_inferior_event): Same.
700 2009-04-13 Tom Tromey <tromey@redhat.com>
702 * python/python-frame.c (frapy_richcompare): Return
703 Py_NotImplemented, not an error. Handle Py_NE as well.
705 2009-04-13 Eli Zaretskii <eliz@gnu.org>
707 * charset.c (EILSEQ): Define if not defined by system headers.
709 2009-04-11 Eli Zaretskii <eliz@gnu.org>
711 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
712 to be consistent with renaming config.intl.in into config_intl.in.
714 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
715 consistent with the change from 2008-11-09.
717 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
719 * gdbtypes.c: Remove excessive parentheses at the return keywords.
720 * varobj.c (varobj_invalidate): Fix indentation.
721 * varobj.c (varobj_invalidate): Fix formatting text width.
723 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
725 Implement -exec-jump.
727 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
728 * mi/mi-main.c (mi_cmd_exec_jump): New.
729 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
731 2009-04-07 Doug Evans <dje@google.com>
733 * symfile.c (symbol_file_clear): Fix indentation.
735 2009-04-06 Mark Kettenis <kettenis@gnu.org>
737 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
739 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
741 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
742 (ppc_linux_auxv_parse): New function.
743 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
744 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
746 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
748 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
749 BFD to contents of SPU name note.
750 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
751 with "from_tty" argument 1 instead of 0.
753 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
756 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
757 Create the symbol in local scope.
758 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
760 2009-04-02 Keith Seitz <keiths@redhat.com>
762 * stabsread.c (read_member_functions): GCC may emit an extra space
763 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
764 whitespace when looking for these functions.
766 2009-04-01 Joel Brobecker <brobecker@adacore.com>
768 Change the default value for "set print frame-arguments" to scalars.
770 * stack.c (print_frame_arguments): Set initial value to "scalars".
772 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
774 * mips-tdep.c (mips_numeric_register_alieses): New definition.
775 (mips_gdbarch_init): Add user registers from
776 mips_numeric_register_aliases.
778 2009-04-01 Joel Brobecker <brobecker@adacore.com>
780 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
782 2009-04-01 Joel Brobecker <brobecker@adacore.com>
784 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
785 this is the last one.
787 2009-04-01 Pedro Alves <pedro@codesourcery.com>
789 * remote.c (append_resumption): New.
790 (remote_vcont_resume): Use it.
792 2009-04-01 Joel Brobecker <brobecker@adacore.com>
794 * windows-nat.c (+windows_get_ada_task_ptid): New function.
795 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
797 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
798 Keith Seitz <keiths@redhat.com>
799 Jan Kratochvil <jan.kratochvil@redhat.com>
802 * Makefile.in (dbxread.o): Update.
803 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
804 * dwarf2read.c (GDB_FORM_cached_string): New.
805 (read_partial_die): Use dwarf2_canonicalize_name.
806 (dwarf2_linkage_name): Use dwarf2_name.
807 (dwarf2_canonicalize_name): New.
808 (dwarf2_name): Use dwarf2_canonicalize_name.
809 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
810 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
811 * symtab.c (lookup_symbol_in_language): Canonicalize input before
813 * cp-name-parser.y: operator() requires two parameters,
814 according to libiberty.
815 * minsyms.c (lookup_minimal_symbol): Canonicalize input
819 2009-03-31 Joel Brobecker <brobecker@adacore.com>
821 Provide support for (Ada) task-specific breakpoints.
823 * ada-lang.h (ada_get_task_number): Add declaration.
824 (breakpoint_ada_task_match): Delete declaration.
825 * ada-tasks.c (ada_get_task_number): Make non-static.
826 * breakpoint.h (struct breakpoint): Add field "task".
827 * breakpoint.c (print_one_breakpoint_location): Add handling of
828 task-specific breakpoints.
829 (create_breakpoint, create_breakpoints, find_condition_and_thread):
830 New parameter "task".
831 (break_command_really): Update calls to find_condition_and_thread
832 and create_breakpoints.
833 (breakpoint_re_set_one): Update call to find_condition_and_thread.
836 2009-03-31 Joel Brobecker <brobecker@adacore.com>
838 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
840 2009-03-31 Pedro Alves <pedro@codesourcery.com>
842 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
843 if the thread's ptid without a thread id field is in the list
844 before calling thread_change_ptid.
845 (extended_remote_attach_1): In non-stop mode, do not rely on
846 querying the current thread, instead, query the thread list, and
847 select the first thread of the process.
848 * gdbthread.h (first_thread_of_process): Declare.
849 * thread.c (first_thread_of_process): Define.
851 2009-03-30 Stan Shebs <stan@codesourcery.com>
853 Make tracepoints into a type of breakpoint.
854 * breakpoint.h (enum bptype): Add bp_tracepoint.
855 (struct breakpoint): Add fields step_count, pass_count, actions.
856 (get_tracepoint, get_tracepoint_by_number): Declare.
857 (all_tracepoints): Declare.
858 * breakpoint.c: Include tracepoint.h, readline.h.
859 (ALL_TRACEPOINTS): Move here from tracepoint.c.
860 (tracepoint_count): Ditto.
861 (should_be_inserted): GDB does not insert tracepoints itself.
862 (print_it_typical): Add tracepoint case.
863 (bpstat_what): Ditto.
864 (print_one_breakpoint_location): Ditto, and add printing for
865 pass count, step count, and action list.
866 (user_settable_breakpoint): Add tracepoint case.
867 (allocate_bp_location): Ditto.
868 (set_breakpoint_location_function): Ditto.
869 (disable_breakpoints_in_shlibs): Ditto.
871 (break_command_really): Add argument traceflag, use to choose
872 basic breakpoint type.
873 (break_command_1): Pass extra argument.
874 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
875 (breakpoint_re_set_one): Add tracepoint case.
876 (disable_command, enable_command): Ditto.
877 (set_tracepoint_count): Move here from tracepoint.c.
878 (trace_command): Move here from tracepoint.c and use
879 break_command_really.
880 (tracepoints_info): Move here from tracepoint.c and call
882 (enable_trace_command): Move here from tracepoint.c and call
884 (disable_trace_command): Move here from tracepoint.c and call
886 (delete_trace_command): Move here from tracepoint.c and call
888 (trace_pass_command): Move here from tracepoint.c.
889 (get_tracepoint_by_number): Ditto.
890 (tracepoint_save_command): Ditto.
891 (get_tracepoint): New function.
892 (all_tracepoints): New function.
893 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
894 deprecate "enable trace" and "disable trace" commands.
895 * tracepoint.h (struct tracepoint): Remove.
896 (tracepoint_chain): Remove decl.
897 (deprecated_create_tracepoint_hook): Remove decl.
898 (deprecated_delete_tracepoint_hook): Remove decl.
899 (deprecated_modify_tracepoint_hook): Remove decl.
900 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
901 (free_actions): Update signature.
902 (validate_actionline): Update signature.
903 (end_actions_pseudocommand): Declare.
904 (while_stepping_pseudocommand): Declare.
905 * tracepoint.c: Include breakpoint.h.
906 (tracepoint_chain, tracepoint_count): Remove.
907 (free_actions, make_cleanup_free_actions): Update signature.
908 (trace_command, set_raw_tracepoint): Remove.
909 (trace_mention): Remove.
910 (tracepoints_info): Remove.
911 (tracepoint_operation, map_args_over_tracepoints): Remove.
912 (get_tracepoint_by_number): Remove.
913 (enable_trace_command, disable_trace_command): Remove.
914 (delete_trace_command, trace_pass_command): Remove.
915 (trace_actions_command, read_actions): Update signature.
916 (validate_actionline): Update signature, use bp loc.
917 (encode_actions): Ditto.
918 (download_tracepoint): New function, body of trace_start_command.
919 (trace_start_command): Call it, use all_tracepoints.
920 (tracepoint_save_command): Remove.
921 (tracepoint_dump_command): Use get_tracepoint.
922 (end_actions_pseudocommand): Make globally visible.
923 (while_stepping_pseudocommand): Ditto.
924 (_initialize_tracepoint): Move command definitions to breakpoint.c.
926 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
928 Expose frames to Python.
929 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
930 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
931 (python-frame.o): New target.
932 * python/python-frame.c: New file.
933 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
934 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
935 gdbpy_initialize_frames): New prototypes.
936 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
937 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
939 * stack.c (find_frame_funname): New function, factored out of
941 (print_frame): Call find_frame_funname.
942 * stack.h (find_frame_funname): Add prototype.
944 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
946 Remove unused value_object attribute `owned_by_gdb'.
947 * python/python-value.c (value_object): Remove owned_by_gdb
949 (valpy_dealloc): Remove reference to self->owned_by_gdb.
950 (valpy_new): Likewise.
951 (value_to_value_object): Likewise.
953 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
955 Change gdb.Value.address from a method to an attribute.
956 * python/python-value.c (value_object): Add `address' element.
957 (valpy_dealloc): Decrement reference to self->address if set.
958 (valpy_new): Initialize val_obj->address.
959 (valpy_address): Rename to ...
960 (valpy_get_address): ... this. Change signature from method to
961 attribute. Update self->address if not set.
962 (value_to_value_object): Initialize val_obj->address.
963 (value_object_getset): Add `address' element.
964 (value_object_methods): Remove `address' element.
966 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
968 * observer.sh: Set LANG/LC_ALL to C, not c.
970 2009-03-28 Kevin Buettner <kevinb@redhat.com>
972 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
975 2009-03-28 Pedro Alves <pedro@codesourcery.com>
977 * remote.c (remote_stop_ns): If multi-process extensions are off,
978 and GDB is requesting the whole process to stop, sent "vCont;t",
981 2009-03-28 Pedro Alves <pedro@codesourcery.com>
983 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
986 2009-03-27 Eli Zaretskii <eliz@gnu.org>
988 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
990 2009-03-26 Doug Evans <dje@google.com>
992 * thread.c (do_restore_current_thread_cleanup): Redo test for
993 whether to restore old->inferior_ptid.
995 2009-03-26 Tom Tromey <tromey@redhat.com>
997 * breakpoint.c (resolve_sal_pc): Preserve original line number
998 when skipping prologue.
1000 2009-03-26 Doug Evans <dje@google.com>
1002 * thread.c (inferior_thread) Remove "extern" in definition.
1004 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
1006 Add gdb.Value.is_optimized_out attribute.
1007 * python/python-value.c (valpy_get_is_optimized_out): New
1009 (value_object_getset): New variable.
1010 (value_object_type): Initialize tp_getset element.
1012 2009-03-26 Joel Brobecker <brobecker@adacore.com>
1014 Recognize missing DW_AT_location as <value optimized out>.
1016 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
1017 Call add_symbol_to_list.
1019 2009-03-25 Tom Tromey <tromey@redhat.com>
1021 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
1022 * stack.c (print_this_frame_argument_p): Use check_typedef.
1024 2009-03-25 Tom Tromey <tromey@redhat.com>
1026 * configure: Rebuild.
1027 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
1028 Rearrange flags setting. Add comments.
1030 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1032 * config/i386/nm-i386.h: Remove code within
1033 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
1034 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
1036 * config/i386/nm-cygwin64.h: Ditto.
1037 * config/i386/nm-fbsd.h: Ditto.
1038 * config/i386/nm-go32.h: Ditto.
1039 * config/i386/nm-linux.h: Ditto.
1040 * config/i386/nm-linux64.h: Ditto.
1042 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1044 ARI fix: "xasprintf" rule.
1045 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
1047 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1049 * remote.c (remote_start_remote): In non-stop mode, call
1050 init_wait_for_inferior before adding threads and inferiors.
1052 2009-03-25 Joel Brobecker <brobecker@adacore.com>
1054 * breakpoint.c (breakpoint_thread_match): Split a large condition
1055 into several smaller conditions. No behavior change.
1057 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1059 * infrun.c (infrun_thread_thread_exit): New.
1060 (_initialize_infrun): Attach it to the thread_exit observer.
1061 * thread.c (delete_thread_1): Always call the observer, passing it
1063 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
1064 SILENT, return immediately.
1066 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1068 * infrun.c (normal_stop): Use has_stack_frames instead of
1070 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
1071 when there is no thread selected.
1072 (mi_cmd_execute): Don't special case commands that can run without
1073 a valid selected thread.
1074 * top.c (execute_command): Don't special case commands that can
1075 run without a valid selected thread. Use has_stack_frames.
1076 * infcmd.c (ensure_valid_thread): New.
1077 (continue_1, step_1, jump_command, signal_command): Use it.
1078 (detach_command): Error out if there's no selected thread/inferior.
1079 * thread.c (print_thread_info): Allow having no thread selected.
1080 (switch_to_thread): Don't read the PC if there is no current thread.
1081 (do_restore_current_thread_cleanup): Don't record the current
1082 frame if there is no current thread.
1083 (make_cleanup_restore_current_thread): Don't read frame info if
1084 there is no selected thread.
1085 (_initialize_thread): Don't mark commands as
1086 "no_selected_thread_ok".
1087 * frame.c (get_current_frame): Error out if there is no valid
1089 (has_stack_frames): Return false if there is no valid
1091 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
1092 "no_selected_thread_ok".
1093 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
1094 (get_cmd_no_selected_thread_ok): Delete.
1095 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
1096 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
1098 * stack.c (get_selected_block): Use has_stack_frames.
1100 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
1102 Fix size of FPSCR in Power 7 processors.
1103 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
1104 (PPC_FEATURE_HAS_DFP): New #define.
1105 (ppc_linux_read_description): Check for DFP feature instead of
1106 ISA 2.05 to decide on size of the FPSCR.
1108 2009-03-25 Kevin Buettner <kevinb@redhat.com>
1110 * mn10300-tdep.c (trad-frame.h): Don't include.
1111 (prologue-value.h): Include.
1112 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
1113 (struct mn10300_prologue): Define.
1114 (push_reg, translate_rreg, check_for_saved): New functions.
1115 (mn10300_analyze_prologue): Rewrite, using prologue-value
1116 machinery. Handle more instructions than before. Permit
1117 instructions to occur in any order.
1118 (mn10300_skip_prologue): Find the extents of the function
1119 in question; mn10300_analyze_prologue no longer does this.
1120 (mn10300_analyze_frame_prologue): New function.
1121 (mn10300_frame_base): New function.
1122 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
1124 (mn10300_frame_prev_register): Likewise.
1125 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
1126 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
1128 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
1130 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1132 Fix completer problem for filename completion on the first try.
1134 * gdb/completer.h (gdb_completion_word_break_characters): New function.
1135 * gdb/completer.c: Include gdb_assert.h.
1136 (complete_line_internal_reason): New enum.
1137 (complete_line_internal): Change last argument type to
1138 complete_line_internal_reason.
1139 Modify function to handle the different complete_line_internal_reason
1141 (complete_line): Adapt to change in complete_line_internal.
1142 (command_completer): Ditto.
1143 (gdb_completion_word_break_characters): Implement new function.
1144 * top.c (init_main): Set rl_completion_word_break_hook to
1145 gdb_completion_word_break_characters.
1148 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1150 ARI fix: "strlen d_name" rule.
1151 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
1154 2009-03-24 Tom Tromey <tromey@redhat.com>
1155 Pedro Alves <pedro@codesourcery.com>
1157 * configure, config.in: Rebuild.
1158 * configure.ac: Check for libiconvlist.
1159 * charset.c: Check HAVE_LIBICONVLIST.
1160 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
1161 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
1162 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
1164 (INTERNAL_CFLAGS_BASE): Update.
1165 (INTERNAL_LDFLAGS): Update.
1168 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1170 * configure.ac: Initialize the variable $PREFER_CURSES.
1171 * configure: Regenerated.
1173 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1175 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
1176 * configure: Regenerated.
1178 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
1180 ARI fix: "strerror" rule.
1181 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
1182 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
1184 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1186 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
1187 before looking up the fields inside our struct type.
1189 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1191 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
1192 trying to resolve the type qualification.
1194 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1196 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
1197 we try to apply the attribute on the real type, rather than
1198 its associated typedef.
1200 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1202 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
1203 to make sure we try to get the modulus of the actual type, not the
1206 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1208 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
1209 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
1210 to get the real type, not the associated typedef.
1212 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1214 * ada-lang.c (ada_get_field_index): Add handling of the case
1215 when TYPE is a typedef of a struct.
1217 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1219 Add gdb_usleep as a portable version of usleep based on gdb_select.
1220 * gdb_usleep.h, gdb_usleep.c: New files.
1221 * Makefile.in (SFILES): Add gdb_usleep.c.
1222 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
1223 (COMMON_OBS): Add gdb_usleep.o.
1224 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
1225 by call to gdb_usleep.
1227 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1229 * buildsym.c (end_symtab): If we ignore the subfiles, then
1230 unlink the associated symtabs if they were already allocated.
1232 2009-03-23 Jerome Guitton <guitton@adacore.com>
1234 Provide a way to force building of GDB with libcurses.
1235 * configure.ac: Add --with-curses.
1236 * configure: Regenerated.
1238 2009-03-23 Tom Tromey <tromey@redhat.com>
1240 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
1243 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
1245 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
1246 solib_contains_address_p instead of searching.
1248 2009-03-23 Tom Tromey <tromey@redhat.com>
1250 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
1251 (iconv): Make 'inbuf' argument const.
1252 (convert_between_encodings): Use ICONV_CONST.
1253 (wchar_iterate): Likewise.
1255 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1257 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
1258 dynamically loaded function.
1259 (LookupPrivilegeValueA): Ditto.
1260 (OpenProcessToken): Ditto.
1261 (AdjustTokenPrivileges): Rename and define placeholder for address of
1262 dynamically loaded function.
1263 (LookupPrivilegeValueA): Ditto.
1264 (OpenProcessToken): Ditto.
1265 (set_process_privilege): Remove check for loaded functions.
1266 (bad_OpenProcessToken): Define.
1267 (_initialize_loadable): Load token functions from advapi here, setting
1268 OpenProcessToken function to a dummy static function which always return
1269 error if OS doesn't support this functionality.
1271 2009-03-22 Nicolas Roche <roche@adacore.com>
1272 Christopher Faylor <me+cygwin@cgf.cx>
1274 * win32-nat.c (ctrl_c_handler): New function.
1275 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
1276 is run in a separate console.
1278 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1280 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
1281 for dynamically loaded function.
1282 (DebugBreakProcess): Ditto.
1283 (DebugSetProcessKillOnExit): Ditto.
1284 (EnumProcessModules): Ditto.
1285 (GetModuleFileNameExA): Ditto.
1286 (GetModuleInformation): Ditto.
1287 (DebugActiveProcessStop): Rename and define placeholder for address of
1288 dynamically loaded function.
1289 (DebugBreakProcess): Ditto.
1290 (DebugSetProcessKillOnExit): Ditto.
1291 (EnumProcessModules): Ditto.
1292 (GetModuleFileNameExA): Ditto.
1293 (GetModuleInformation): Ditto.
1294 (psapi_loaded): Delete.
1295 (get_module_name): Don't check psapi_loaded, just rely on the fact that
1296 dynamically loaded functions will return failure if they weren't
1298 (has_detach_ability): Delete.
1299 (windows_attach): Remove call to has_detach_ability (). Just rely on
1300 functions being callable.
1301 (bad_DebugActiveProcessStop): Define.
1302 (bad_DebugBreakProcess): Ditto.
1303 (bad_DebugSetProcessKillOnExit): Ditto.
1304 (bad_EnumProcessModules): Ditto.
1305 (bad_GetModuleFileNameExA): Ditto.
1306 (bad_GetModuleInformation): Ditto.
1307 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
1308 dynamic storage here, setting nonexistent functions to dummy static
1309 functions which always return error.
1311 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1313 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
1314 to the about_to_proceed observer notification.
1315 (mi_about_to_proceed): New.
1316 (mi_on_resume): Only output ^running and the prompt here if the
1317 target was proceeded.
1318 * breakpoint.c (breakpoint_proceeded): New static.
1319 (breakpoint_about_to_proceed): New.
1320 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
1321 the about_to_proceed observer notification.
1322 * inferior.h (breakpoint_proceeded): Delete declaration.
1323 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
1324 Notify the about_to_proceed observers.
1325 (struct inferior_status): Delete breakpoint_proceeded member.
1326 (save_inferior_status): Don't save it.
1327 (restore_inferior_status): Don't restore it.
1328 * mi-main.h (mi_proceeded): Declare.
1329 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
1332 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1334 * gdbthread.h (struct thread_info): Add in_infcall member.
1335 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
1336 Remove reverences to suppress_resume_observer. Refresh
1337 `call_thread' after returning from `proceed'.
1338 * infcmd.c (suppress_resume_observer): Delete.
1339 * inferior.h (suppress_resume_observer): Delete declaration.
1340 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
1342 * thread.c (set_running): Remove references to
1343 suppress_resume_observer.
1344 * infrun.c (struct inferior_status): Add in_infcall member.
1345 (save_inferior_status): Save it.
1346 (restore_inferior_status): Restore it.
1348 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1350 * infcall.c (run_inferior_call): Remove references to
1351 suppress_stop_observer.
1352 * infcmd.c (suppress_stop_observer): Delete.
1353 (finish_command_continuation): Remove NOTE. Don't clear
1354 suppress_stop_observer anymore.
1355 (finish_command_continuation_free_arg): Likewise.
1356 (finish_forward): Remove references to suppress_stop_observer.
1357 Call normal_stop observer if we haven't already.
1358 * inferior.h (suppress_stop_observer): Delete.
1359 * infrun.c (normal_stop): When deciding to suppress the
1360 normal_stop observer, check for proceed_to_finish instead of
1361 suppress_stop_observer.
1363 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1365 * symfile.c (symfile_relocate_debug_section): Remove check for
1368 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1369 Jim Blandy <jimb@red-bean.com>
1370 Thiago Jung Bauermann <bauerman@br.ibm.com>
1371 Tom Tromey <tromey@redhat.com>
1373 Miscellaneous fixes to the Python code.
1374 * python/python-cmd.c (cmdpy_init): Accept keyword
1376 * python/python-value.c (valpy_string): Accept keyword
1378 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
1379 Do not call value_to_value_object on NULL RES_VAL.
1380 (value_object_methods): Change `string' entry to also accept
1382 (convert_value_from_python): Return a copy of the value if obj is
1384 (value_object_methods): Mark the `string' method as accepting
1385 keywords, and show method "prototype" in the doc string.
1386 * python/python.c (get_parameter): Don't return inside a
1389 2009-03-20 Tom Tromey <tromey@redhat.com>
1391 Add support for convenience functions in Python.
1392 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
1393 (SUBDIR_PYTHON_SRCS): Add python-function.c.
1394 (python-function.o): New target.
1395 * eval.c: Include "python/python.h" and <ctype.h>.
1396 (evaluate_subexp_standard): Handle values of type
1397 TYPE_CODE_INTERNAL_FUNCTION.
1398 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
1399 * parse.c (write_exp_string): Remove duplicate word in comment.
1400 * python/python-function.c: New file.
1401 * python/python-internal.h (gdbpy_initialize_functions): Add
1403 * python/python.c (_initialize_python): Call
1404 gdbpy_initialize_functions.
1405 * valprint.c (value_check_printable): Handle values of type
1406 TYPE_CODE_INTERNAL_FUNCTION.
1407 * value.c: Include "cli/cli-decode.h".
1408 (internal_function): New struct.
1409 (functionlist, internal_fn_type): New static variables.
1410 (lookup_only_internalvar,
1411 lookup_internalvar): Add const qualifier to name argument.
1412 (create_internalvar): Likewise. Initialize new field.
1413 (set_internal_var): Fix typo in comment. Don't allow assignment
1414 to canonical variable.
1415 (value_create_internal_function, value_internal_function_name,
1416 call_internal_function, function_command, function_destroyer,
1417 add_internal_function): New functions.
1418 (_initialize_values): Create `function' placeholder command.
1419 Initialize internal_fn_type.
1420 * value.h (lookup_only_internalvar, create_internalvar,
1421 lookup_internalvar): Add const qualifier to name argument.
1422 (internal_function_fn, add_internal_function, call_internal_function,
1423 value_internal_function_name): Add prototypes.
1424 (struct internalvar) <canonical>: New field.
1426 2009-03-20 Tom Tromey <tromey@redhat.com>
1428 * c-lang.c (evaluate_subexp_c): Call check_typedef.
1430 2009-03-20 Tom Tromey <tromey@redhat.com>
1431 Julian Brown <julian@codesourcery.com>
1433 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
1434 PR i18n/9401, PR exp/9613:
1436 * value.h (value_typed_string): Declare.
1437 (val_print_string): Update.
1438 * valprint.h (print_char_chars): Update.
1439 * valprint.c (print_char_chars): Add type argument. Update.
1440 (val_print_string): Likewise.
1441 * valops.c (value_typed_string): New function.
1442 * utils.c (host_char_to_target): New function.
1443 (parse_escape): Use host_char_to_target, host_hex_value. Update.
1445 (no_control_char_error): Remove.
1446 * typeprint.c (print_type_scalar): Update.
1447 * scm-valprint.c (scm_scmval_print): Update.
1448 * scm-lang.h (scm_printchar, scm_printstr): Update.
1449 * scm-lang.c (scm_printchar): Add type argument.
1450 (scm_printstr): Likewise.
1451 * printcmd.c (print_formatted): Update.
1452 (print_scalar_formatted): Update.
1453 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
1454 Handle '%lc' and '%ls'.
1455 * parser-defs.h (struct typed_stoken): New type.
1456 (struct stoken_vector): Likewise.
1457 (write_exp_string_vector): Declare.
1458 * parse.c (write_exp_string_vector): New function.
1459 * p-valprint.c (pascal_val_print): Update.
1460 * p-lang.h (is_pascal_string_type, pascal_printchar,
1461 pascal_printstr): Update.
1462 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
1463 Add 'char_type' argument.
1464 (pascal_emit_char): Add type argument.
1465 (pascal_printchar): Likewise.
1466 (pascal_printstr): Likewise.
1467 * objc-lang.c (objc_emit_char): Add type argument.
1468 (objc_printchar): Likewise.
1469 (objc_printstr): Likewise.
1470 * macroexp.c (get_character_constant): Handle unicode characters.
1472 (get_string_literal): Handle unicode strings. Use
1474 * m2-valprint.c (print_unpacked_pointer): Update.
1475 (m2_print_array_contents): Update.
1476 (m2_val_print): Update.
1477 * m2-lang.c (m2_emit_char): Add type argument.
1478 (m2_printchar): Likewise.
1479 (m2_printstr): Likewise.
1480 * language.h (struct language_defn) <la_printchar>: Add type
1482 <la_printstr, la_emitchar>: Likewise.
1483 (LA_PRINT_CHAR): Likewise.
1484 (LA_PRINT_STRING): Likewise.
1485 (LA_EMIT_CHAR): Likewise.
1486 * language.c (unk_lang_emit_char): Add type argument.
1487 (unk_lang_printchar): Likewise.
1488 (unk_lang_printstr): Likewise.
1489 * jv-valprint.c (java_val_print): Update.
1490 * jv-lang.c (java_emit_char): Add type argument.
1491 * f-valprint.c (f_val_print): Update.
1492 * f-lang.c (f_emit_char): Add type argument.
1493 (f_printchar): Likewise.
1494 (f_printstr): Likewise.
1495 * expprint.c (print_subexp_standard): Update.
1496 * charset.h (target_wide_charset): Declare.
1497 (c_target_char_has_backslash_escape, c_parse_backslash,
1498 host_char_print_literally, host_char_to_target,
1499 target_char_to_host, target_char_to_control_char): Remove.
1500 (enum transliterations): New type.
1501 (convert_between_encodings): Declare.
1502 (HOST_ESCAPE_CHAR): New define.
1503 (host_letter_to_control_character, host_hex_value): Declare.
1504 (enum wchar_iterate_result): New enum.
1505 (struct wchar_iterator): Declare.
1506 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1507 wchar_push_back): Declare.
1508 * charset-list.h: New file.
1509 * c-valprint.c (textual_name): New function.
1510 (textual_element_type): Handle wide character types.
1511 (c_val_print): Pass original type to textual_element_type. Handle
1512 wide character types.
1513 (c_value_print): Use textual_element_type. Pass original type of
1515 * c-lang.h (enum c_string_type): New type.
1516 (c_printchar, c_printstr): Update.
1517 * c-lang.c (classify_type): New function.
1518 (print_wchar): Likewise.
1519 (c_emit_char): Add type argument. Handle wide characters.
1520 (c_printchar): Likewise.
1521 (c_printstr): Add type argument. Handle wide and multibyte
1523 (convert_ucn): New function.
1524 (emit_numeric_character): Likewise.
1525 (convert_octal): Likewise.
1526 (convert_hex): Likewise.
1527 (ADVANCE): New macro.
1528 (convert_escape): New function.
1529 (parse_one_string): Likewise.
1530 (evaluate_subexp_c): Likewise.
1531 (exp_descriptor_c): New global.
1532 (c_language_defn): Use exp_descriptor_c.
1533 (cplus_language_defn): Likewise.
1534 (asm_language_defn): Likewise.
1535 (minimal_language_defn): Likewise.
1536 (charset_for_string_type): New function.
1537 * c-exp.y (%union): Add 'svec' and 'tsval'.
1539 (exp): Add CHAR production.
1540 (string_exp): Rewrite.
1541 (exp) <string_exp>: Rewrite.
1542 (tempbuf): Now global.
1543 (tempbuf_init): New global.
1544 (parse_string_or_char): New function.
1545 (yylex) <tempbuf>: Now global.
1546 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
1548 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
1549 (c_parse_escape): New function.
1550 * auxv.c (fprint_target_auxv): Update.
1551 * ada-valprint.c (ada_emit_char): Add type argument.
1552 (ada_printchar): Likewise.
1553 (ada_print_scalar): Update.
1554 (printstr): Add type argument. Update calls to ada_emit_char.
1555 (ada_printstr): Add type argument.
1556 (ada_val_print_array): Update.
1557 (ada_val_print_1): Likewise.
1558 * ada-lang.c (emit_char): Add type argument.
1559 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
1561 * gdb_locale.h: Include langinfo.h.
1562 * charset.c (_initialize_charset): Set default host charset from
1563 the locale. Don't register charsets. Add target-wide-charset
1564 commands. Call find_charset_names.
1565 (struct charset, struct translation): Remove.
1566 (GDB_DEFAULT_HOST_CHARSET): Remove.
1567 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
1568 (target_wide_charset_name): New global.
1569 (show_host_charset_name): Handle "auto".
1570 (show_target_wide_charset_name): New function.
1571 (host_charset_enum, target_charset_enum): Remove.
1572 (charset_enum): New global.
1573 (all_charsets, register_charset, lookup_charset, all_translations,
1574 register_translation, lookup_translation): Remove.
1575 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
1576 (iso_8859_print_literally, iso_8859_to_control,
1577 iso_8859_family_charset): Remove.
1578 (ebcdic_print_literally, ebcdic_to_control,
1579 ebcdic_family_charset): Remove.
1580 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
1581 register_iconv_charsets): Remove.
1582 (target_wide_charset_be_name, target_wide_charset_le_name): New
1584 (identity_either_char_to_other): Remove.
1585 (set_be_le_names, validate): New functions.
1586 (backslashable, backslashed, represented): Remove.
1587 (default_c_target_char_has_backslash_escape): Remove.
1588 (default_c_parse_backslash, iconv_convert): Remove.
1589 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
1590 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
1591 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
1592 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
1593 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
1594 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
1595 (table_convert_char, table_translation, simple_table_translation):
1597 (current_host_charset, current_target_charset,
1598 c_target_char_has_backslash_escape_func,
1599 c_target_char_has_backslash_escape_baton): Remove.
1600 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
1601 (host_char_to_target_func, host_char_to_target_baton): Remove.
1602 (target_char_to_host_func, target_char_to_host_baton): Remove.
1603 (cached_iconv_host_to_target, cached_iconv_target_to_host):
1605 (lookup_charset_or_error, check_valid_host_charset): Remove.
1606 (set_host_and_target_charsets): Remove.
1607 (set_host_charset, set_target_charset): Remove.
1608 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
1609 (set_target_wide_charset_sfunc): New function.
1610 (show_charset): Print target wide character set.
1611 (host_charset, target_charset): Rewrite.
1612 (target_wide_charset): New function.
1613 (c_target_char_has_backslash_escape): Remove.
1614 (c_parse_backslash): Remove.
1615 (host_letter_to_control_character): New function.
1616 (host_char_print_literally): Remove.
1617 (host_hex_value): New function.
1618 (target_char_to_control_char): Remove.
1619 (cleanup_iconv): New function.
1620 (convert_between_encodings): New function.
1621 (target_char_to_host): Remove.
1622 (struct wchar_iterator): Define.
1623 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1624 wchar_push_back): New functions.
1625 (do_cleanup_iterator): New function.
1626 (char_ptr): New typedef.
1627 (charsets): New global.
1628 (add_one, find_charset_names): New functions.
1629 (default_charset_names): New global.
1630 (auto_host_charset_name): Likewise.
1631 * aclocal.m4, config.in, configure: Rebuild.
1632 * configure.ac: Call AM_LANGINFO_CODESET.
1633 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
1634 (AM_ICONV): Invoke earlier.
1635 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
1636 LIBICONV_LIBDIR. Check for libiconv in build tree.
1637 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
1638 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
1639 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
1640 * gdb_obstack.h (obstack_grow_wstr): New define.
1641 * gdb_wchar.h: New file.
1642 * defs.h: Include it.
1644 2009-03-20 Tom Tromey <tromey@redhat.com>
1645 Jan Kratochvil <jan.kratochvil@redhat.com>
1647 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
1648 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
1650 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
1652 * ada-typeprint.c (print_array_type): Do the NULL check
1655 2009-03-19 Tom Tromey <tromey@redhat.com>
1657 * utils.c (do_obstack_free): New function.
1658 (make_cleanup_obstack_free): Likewise.
1659 * defs.h (make_cleanup_obstack_free): Declare.
1661 2009-03-18 Doug Evans <dje@google.com>
1663 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
1664 int, not a long long.
1665 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
1667 * expprint.c (dump_raw_expression): Print note if non-NULL.
1669 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
1672 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
1674 * Makefile.in: Update license to GPLv3.
1675 * ada-exp.y: Update license to GPLv3.
1676 * ada-lex.l: Update license to GPLv3.
1677 * c-exp.y: Update license to GPLv3.
1678 * cp-name-parser.y: Update license to GPLv3.
1679 * darwin-nat-info.c: Update license to GPLv3.
1680 * f-exp.y: Update license to GPLv3.
1681 * gdb_thread_db.h: Update license to GPLv3.
1682 * hppanbsd-nat.c: Update license to GPLv3.
1683 * hppanbsd-tdep.c: Update license to GPLv3.
1684 * hppaobsd-tdep.c: Update license to GPLv3.
1685 * jv-exp.y: Update license to GPLv3.
1686 * m2-exp.y: Update license to GPLv3.
1687 * objc-exp.y: Update license to GPLv3.
1688 * p-exp.y: Update license to GPLv3.
1689 * reply_mig_hack.awk: Update license to GPLv3.
1690 * reverse.c: Update license to GPLv3.
1691 * xtensa-xtregs.c: Update license to GPLv3.
1693 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1695 * remote.c (remote_close): Don't call generic_mourn_inferior.
1696 (remote_mourn_1): Call generic_mourn_inferior after closing the
1699 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1701 * remote.c (remote_start_remote): Add missing call to
1702 init_wait_for_inferior in non-stop mode.
1704 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1706 * breakpoint.c (bpstat_should_step): Only consider software
1707 watchpoints that have a location.
1709 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1711 Add a target_ops parameter to the to_kill method in struct target_ops.
1713 * target.h (struct target_ops): Add a "target_ops *" parameter to
1715 (target_kill): Remove macro. Add declaration.
1716 * target.c (debug_to_kill): Delete, no longer necessary.
1717 (target_kill): New function.
1718 (update_current_target): Stop inheriting the to_kill method.
1719 Do not de_fault it to no_process either.
1720 (setup_target_debug): Do not set current_target.to_kill.
1721 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
1722 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
1723 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
1726 2009-03-17 Doug Evans <dje@google.com>
1728 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
1729 glibc 2.3.2 and earlier.
1731 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1733 * frame.c (get_prev_frame_1): Do not perform the inner_frame
1734 sanity check if this_frame is not NORMAL.
1735 (frame_id_inner): Update the description of this function.
1737 2009-03-17 Hui Zhu <teawater@gmail.com>
1739 * stack.c: Change the introduce of "disassemble-next-line".
1741 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1743 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
1746 2009-03-17 Hui Zhu <teawater@gmail.com>
1748 * stack.c: Include valprint.h.
1749 (disassemble_next_line): New enum.
1750 (show_disassemble_next_line): New function. Show the current
1751 value of disassemble-next-line.
1752 (gdb_disassembly_stub_args): New struct for argument passing
1753 between function do_gdb_disassembly and function
1754 gdb_disassembly_stub.
1755 (gdb_disassembly_stub): New function. Helper for
1757 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
1758 the exception from the gdb_disassembly because it will be
1759 broken by filter sometime.
1760 (print_frame_info): If disassemble-next-line is set to auto
1761 or on and doesn't have the line debug messages for $pc,
1762 output the next instruction.
1763 If disassemble-next-line is set to on and there is line debug
1764 messages, output assembly codes for next line.
1765 (_initialize_stack): Make the "set disassemble-next-line"
1766 command an auto-boolean command. Change its class to
1767 class_stack. Place it in the top level set list. Extend help
1768 to describe the auto mode.
1770 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1772 * infrun.c (normal_stop): Don't overwrite old_chain.
1774 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1776 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
1777 which is undefined, by call to regcache_invalidate, which should
1778 do what the original author wanted to do.
1780 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1782 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
1783 (mips_create_inferior): Likewise.
1785 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1787 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
1789 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1791 * darwin-nat.c (darwin_resume): Fix a compiler warning when
1792 building on x86_64-darwin.
1794 2009-03-16 Tristan Gingold <gingold@adacore.com>
1796 * configure.tgt: Add handling for x86_64-darwin.
1798 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1800 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
1802 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1804 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
1805 Use the ops parameter to get to the target beneath, rather than
1806 using the current_target global. Using the current_target global
1807 was an unintended accident.
1809 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1811 Fix an error happening while loading symbols from a core file
1814 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
1815 to detect whether we're debugging a core file or not.
1817 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1819 Modernize the aix-thread later by getting rid of the base_target
1820 global. This brings back to life the AIX port which was otherwise
1821 crashing all the time.
1823 * aix-thread.c (base_target): Delete.
1824 (pd_enable): Do not set base_target.
1825 (aix_thread_attach): Use find_target_beneath instead of base_target.
1826 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
1827 (aix_thread_fetch_registers, aix_thread_store_registers),
1828 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
1829 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
1830 (aix_thread_kill): Delete. Does not seem necessary.
1831 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
1833 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1835 * stack.c (return_command <retval_exp>): New variables retval_expr
1836 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
1837 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
1838 if RETURN_TYPE is NULL.
1840 2009-03-14 Pedro Alves <pedro@codesourcery.com>
1842 * remote.c (PACKET_qAttached): New.
1843 (remote_query_attached): New.
1844 (remote_add_inferior): Add new `attached' argument. Handle it.
1845 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
1846 -1 to remote_add_inferior in new parameter.
1847 (extended_remote_attach_1): Adjust to pass 1 to
1848 remote_add_inferior in the new parameter.
1849 (extended_remote_create_inferior_1): Adjust to pass 0 to
1850 remote_add_inferior in the new parameter.
1851 (_initialize_remote): Add "set/show remote query-attached-packet"
1854 2009-03-13 Tom Tromey <tromey@redhat.com>
1856 * symtab.c (lookup_symbol_in_language): Use a cleanup.
1858 2009-03-13 Doug Evans <dje@google.com>
1860 * exceptions.h: Clean up some comments on catch_exceptions usage.
1861 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
1864 2009-02-17 Joel Brobecker <brobecker@adacore.com>
1866 The following patch helps getting rid of a warning inside solib-som.c.
1868 * source.c (source_full_path_of): Constify parameter filename.
1869 * defs.h (source_full_path_of): Update declaration accordingly.
1871 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1873 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
1874 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
1875 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
1877 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1879 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
1880 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
1882 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1884 * ada-tasks.c (ada_task_is_alive): Move up and make static.
1885 * ada-lang.h (ada_task_is_alive): Remove declaration.
1887 2009-03-12 Jerome Guitton <guitton@adacore.com>
1889 * ada-lang.c (ada_delta): Change the type of numerators and
1890 denominators to DOUBLEST, as they may not fit into a long.
1891 (scaling_factor): Ditto.
1893 2009-03-12 Jerome Guitton <guitton@adacore.com>
1895 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
1897 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1899 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
1900 types, if we are unable to determine the actual symbol type
1901 from its tag, then use the static approximation instead.
1903 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1905 Fix crash printing packed record with packed array.
1907 * ada-lang.c (ada_modulus_from_name): New function.
1908 (ada_modulus): In the case where the type length is bigger than
1909 the size of the type used to hold the bounds, try determining
1910 the modulus from the type name.
1911 (ada_value_primitive_packed_val): Fix bug in the computation of
1912 ntarg causing an out-of-buffer invalid access.
1914 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1916 Fix segfault when printing short_integer'last.
1918 * ada-lang.c (ada_find_any_type): Search in the primitive types
1919 if a symbol could not be found.
1921 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1923 * ada-tasks.c (task_states,long_task_states): Add new states
1924 Activating and Acceptor_Delay_Sleep. Update the description
1925 of state Acceptor_Sleep.
1927 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
1929 Fix a build failure on Darwin following some changes in
1930 the profile of some target_ops methods.
1932 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
1934 (darwin_stop_inferior, darwin_detach): Likewise.
1936 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
1938 Include token in ^running notification for CLI commands.
1940 * mi/mi-main.c (mi_execute_command): Set current_token here.
1941 (mi_cmd_execute): Do not set current_token here.
1943 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
1947 * mi/mi-main.c (mi_print_timing_maybe): New.
1948 (captured_mi_execute_command): Simplify. Output timings to
1950 (mi_execute_async_cli_command): Do not print timings.
1951 * mi/mi-main.h (mi_print_timing_maybe): Declare.
1952 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
1954 2009-03-12 Jerome Guitton <guitton@adacore.com>
1956 * xcoffread.c (process_linenos): Check if the line in the
1957 include table refers to the main source file and, if so,
1958 add them to the main subfile.
1960 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1962 Fix a build failure on AIX introduced after a change in the profile
1963 of some of the "methods" in the target_ops structure.
1964 * aix-thread.c: Add missing target_ops parameter throughout.
1966 Implement Ada task switching on AIX.
1967 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
1968 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
1970 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
1972 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
1973 value_mark and value_free_to_mark.
1974 * objfiles.c (free_objfile): Call objfile_free_data before
1977 2009-03-10 Hui Zhu <teawater@gmail.com>
1979 * disasm.c (gdb_disassembly): Remove unused argument
1981 * disasm.h (gdb_disassembly): Ditto.
1982 * cli/cli-cmds.c (print_disassembly): Ditto.
1983 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
1985 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
1987 * solib.c (solib_contains_address_p): New function.
1988 (solib_name_from_address): Use it.
1989 * printcmd.c (display_uses_solib_p): Use it.
1990 * solib.h (solib_contains_address_p): Declare it.
1992 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1994 * varobj.c (free_variable): Call value_free.
1996 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1999 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
2000 Move the variable `macinfo_type' out of the loop. Create a new
2001 processing pass before the current one to pre-create `current_file'.
2002 New complaint on misplaced zero/non-zero definitions/includes.
2003 Skip first DW_MACINFO_start_file with `at_commandline' set.
2005 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
2007 * solib.c (reload_shared_libraries): Give
2008 inferior a chance to reset solib breakpoint.
2011 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
2013 * windows-nat.c (dr): Redefine to use largest possible integer which
2015 (cygwin_set_dr): Avoid coercion.
2017 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
2019 * windows-nat.c (windows_create_inferior): Implement --tty handling on
2022 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
2024 Rename solib_address to solib_name_from_address.
2025 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
2026 (disable_breakpoints_in_unloaded_shlib): Update.
2027 * printcmd.c (display_uses_solib_p): Likewise.
2028 * stack.c (print_frame): Likewise.
2032 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
2034 * printcmd.c (do_one_display): Reparse exp_string.
2035 (display_uses_solib_p): New function.
2036 (clear_dangling_display_expressions): New function.
2037 (_initialize_printcmd): Add observer.
2038 * solib.c (no_shared_libraries): Swap order of calls to
2039 clear_solib and objfile_purge_solibs.
2041 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2043 Implement the target-specific part of Ada tasking support
2046 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
2047 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
2049 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2051 Get rid of the global "base_target" and use "find_target_beneath"
2052 to find the underlying target.
2053 * dec-thread.c (base_target): Delete.
2054 (enable_dec_thread): Remove assignement to base_target.
2055 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
2056 (dec_thread_fetch_registers, dec_thread_store_registers)
2057 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
2058 Update the function profile if necessary.
2059 Use find_target_beneath to call the same method but from
2060 the underlying target, removing the need for "base_target".
2062 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
2063 Fix a copy/paste error in a few debug traces...
2065 * solib-osf.c (init_so): Use a simpler method for computing
2066 the size of lm_info structure. This also gets rid of warning
2067 emitted by the compiler.
2069 2009-03-05 Pedro Alves <pedro@codesourcery.com>
2071 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
2072 duplicates of permanent breakpoints.
2074 2009-03-04 Pedro Alves <pedro@codesourcery.com>
2076 * inferior.h (notice_new_inferior): Declare.
2077 * infcmd.c (notice_new_inferior): New.
2078 * remote.c (remote_add_inferior, remote_add_thread): New.
2079 (notice_new_inferiors): Rename to...
2080 (remote_notice_new_inferior): ... this. Add RUNNING argument.
2081 Use remote_add_thread instead of add_thread, passing it the
2082 RUNNING argument. Add an inferior with remote_add_inferior. If
2083 we just learned about an inferior, call notice_new_inferior.
2084 (record_currthread): Adjust.
2085 (remote_threads_info): Adjust to use remote_notice_new_inferior.
2086 (remote_start_remote, extended_remote_attach_1): Use
2087 remote_add_inferior.
2088 (process_stop_reply): Adjust. Call remote_notice_new_inferior
2089 after handling expedited registers and watchpoint state.
2090 (extended_remote_create_inferior_1): Use remote_add_inferior.
2092 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
2094 * infcmd.c (registers_info): Remove register number case.
2096 2009-03-03 Pedro Alves <pedro@codesourcery.com>
2098 * top.c (quit_target): Check for target_has_execution before
2099 killing or detaching from inferiors.
2101 2009-03-02 Joel Brobecker <brobecker@adacore.com>
2103 Remove some unused routines.
2105 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
2107 * ada-lang.c (ada_task_list_iterator_ftype)
2108 (iterate_over_live_ada_tasks): Delete.
2109 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
2112 2009-03-01 Doug Evans <dje@google.com>
2114 * symtab.c: Remove trailing whitespace throughout the file.
2115 (expand_line_sal): Fix some typos and whitespace.
2117 * Makefile.in (clean): rm -f $(DEPDIR)/*.
2119 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
2120 (init.c): signals/ -> common/.
2121 (signals.o): Update.
2122 * target.h (target_signal_to_string,target_signal_to_string)
2123 (target_signal_from_name,target_signal_to_host_p)
2124 (target_signal_from_host,target_signal_to_host): Move to ...
2125 * common/gdb_signals.h: ... here. New file.
2126 * common/signals.c: Moved here from signals/signals.c.
2127 #include gdb_signals.h, remove #include of target.h in gdb case.
2128 (target_signal_from_command,default_target_signal_to_host)
2129 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
2131 Include thread ID in target_wait debugging output.
2132 * infrun.c (print_target_wait_results): New function.
2133 (wait_for_inferior,fetch_inferior_event): Call it.
2135 2009-02-27 Pedro Alves <pedro@codesourcery.com>
2137 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
2138 with a ptid_t field.
2139 * linux-thread-db.c (thread_get_info_callback): Build the ptid
2140 using the pid stored in proc_handle.ptid.
2141 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
2142 (check_for_thread_db, thread_db_detach, check_event)
2143 (thread_db_mourn_inferior, find_new_threads_callback)
2144 (thread_db_find_new_threads_1): Adjust.
2145 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
2146 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
2148 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
2150 * valprint.c (read_string): Rework clean-up logic. Use
2151 free_current_contents to clean-up buffer.
2153 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
2155 * MAINTAINERS: Update e-mail address.
2157 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
2159 * python/python-utils.c (python_string_to_unicode): Always return
2161 (python_string_to_target_string): Decrement transient python
2163 (python_string_to_host_string): Likewise.
2165 2007-02-26 Pedro Alves <pedro@codesourcery.com>
2167 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
2168 call to super_fetch_registers.
2169 (mips64_linux_store_registers): Pass `ops' to call to
2170 super_store_registers.
2172 2009-02-25 Doug Evans <dje@google.com>
2174 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
2177 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
2178 disabled_shlib_breaks, unused.
2180 * printcmd.c (build_address_symbolic): Fix comment.
2182 2009-02-25 Hui Zhu <teawater@gmail.com>
2184 * cli/cli-script.c (define_command): Add _() to query.
2185 * gnu-nat.c (inf_validate_task_sc): Ditto.
2186 * infcmd.c (kill_if_already_running): Ditto.
2187 (jump_command): Ditto.
2188 (attach_command): Ditto.
2189 * inflow.c (kill_command): Ditto.
2190 * infrun.c (handle_command): Ditto.
2191 * maint.c (maintenance_dump_me): Ditto.
2192 * memattr.c (mem_delete_command): Ditto.
2193 * monitor.c (monitor_interrupt_query): Ditto.
2194 * nto-procfs.c (interrupt_query): Ditto.
2195 * printcmd.c (undisplay_command): Ditto.
2196 * remote-mips.c (mips_kill): Ditto.
2197 * remote.c (interrupt_query): Ditto.
2198 * solib-irix.c (irix_open_symbol_file_object): Ditto.
2199 * solib-osf.c (osf_open_symbol_file_object): Ditto.
2200 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
2201 * solib-som.c (som_open_symbol_file_object): Ditto.
2202 * solib-svr4.c (open_symbol_file_object): Ditto.
2203 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
2204 * target.c (kill_or_be_killed): Ditto.
2205 * tracepoint.c (delete_trace_command): Ditto.
2206 * top.c (quit_confirm): Add _() to s that will be used
2209 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
2211 Fix windows-nat.c compilation failure.
2213 * windows-nat.c (windows_thread_alive): Fix forward declaration.
2214 (get_windows_debug_event): Add ops parameter to call to windows_resume.
2216 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2218 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
2220 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
2222 * symtab.c (find_line_symtab): Initialize exact to avoid
2225 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2227 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
2228 `ops' to recursive call.
2230 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2232 * corelow.c (get_core_registers): Adjust.
2233 (core_file_thread_alive): Rename to...
2234 (core_thread_alive): ... this.
2235 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
2236 (init_core_ops): Adjust.
2237 (coreops_suppress_target): Delete.
2238 (_initialize_corelow): Unconditionally add core_ops.
2239 * procfs.c: Include "inf-child.h".
2240 (procfs_ops): Delete.
2241 (init_procfs_ops): Delete. Reimplement as...
2242 (procfs_target): ... this, inheriting from inf-child.
2243 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
2244 (procfs_prepare_to_store): Delete.
2245 (procfs_store_registers, procfs_resume): Adjust.
2246 (procfs_open): Delete.
2247 (procfs_suppress_run): Delete.
2248 (procfs_can_run): Delete.
2249 (procfs_mourn_inferior): Adjust.
2250 (procfs_init_inferior): Add target_ops parameter. Adjust.
2251 (procfs_create_inferior): Don't pass procfs_init_inferior to
2252 fork_inferior. Instead call it after fork_inferior returns.
2253 (procfs_find_new_threads): Adjust.
2254 (_initialize_procfs): Adjust to use procfs_target instead of
2256 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
2257 (lwp_to_thread): Use target_thread_alive.
2258 (sol_thread_open): Delete.
2259 (sol_thread_attach): Delete.
2260 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
2261 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
2262 to use find_target_beneath.
2263 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
2264 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
2265 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
2266 (check_for_thread_db): New.
2267 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
2268 (sol_thread_new_objfile): Call check_for_thread_db.
2269 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
2270 (sol_thread_can_run): Delete.
2271 (sol_thread_alive): Adjust to use find_target_beneath.
2272 (sol_thread_stop): Delete.
2273 (rw_common): Use target_write_memory or target_read_memory.
2274 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
2275 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
2276 (solaris_pid_to_str): Remove check for libthread_db initialization
2278 (sol_find_new_threads): Remove check for libthread_db
2279 initialization failing, or for an invalid inferior_ptid. Adjust
2280 to use find_target_beneath.
2281 (sol_core_open, sol_core_close, sol_core_detach,
2282 sol_core_files_info, sol_find_memory_regions,
2283 sol_make_note_section, ignore): Delete.
2284 (init_sol_thread_ops): Make it a thread_stratum target. Remove
2285 unneeded callback settings.
2286 (init_sol_core_ops): Delete.
2287 (_initialize_sol_thread): No longer call init_sol_core_ops, set
2288 procfs_suppress_run, or hack with core_ops.
2290 * target.h (struct target_ops): Add a target_ops * parameter to
2291 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
2292 and to_find_new_threads.
2293 (target_fetch_registers, target_store_registers)
2294 (target_thread_alive, target_find_new_threads): Redeclare as
2297 * target.c (update_current_target): Do not inherit or de_fault
2298 to_resume, to_fetch_registers, to_store_registers,
2299 to_thread_alive, to_find_new_threads.
2300 (target_resume): Adjust.
2301 (target_thread_alive, target_find_new_threads): New.
2302 (debug_to_resume, debug_to_fetch_registers): Delete.
2303 (target_fetch_registers): New.
2304 (debug_to_store_registers): Delete.
2305 (target_store_registers): New.
2306 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
2307 (setup_target_debug): Adjust.
2309 * gdbcore.h (core_ops): Delete declaration.
2311 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
2312 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
2313 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
2314 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
2315 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
2316 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
2317 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
2318 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
2319 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
2320 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
2321 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
2322 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
2323 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
2324 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
2326 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
2327 * gdbarch.h, gdbarch.c: Regenerate.
2329 * sol2-tdep.c: Include "inferior.h".
2330 (sol2_core_pid_to_str): New.
2331 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
2333 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2334 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2335 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2336 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2338 2009-02-22 Doug Evans <dje@google.com>
2340 * exec.c (exec_file_attach): Fix comment.
2342 2009-02-22 Pedro Alves <pedro@codesourcery.com>
2344 Silence a few -Wmissing-prototypes warnings.
2347 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
2349 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
2350 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
2351 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
2352 (_initialize_amd64nbsd_tdep): ... this.
2353 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
2354 (_initialize_arm_linux_tdep): Declare.
2355 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
2356 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
2357 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
2358 * avr-tdep.c (avr_return_value): Make it static.
2359 (avr_frame_unwind_cache): Ditto.
2360 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
2361 (bsd_uthread_solib_loaded): Ditto.
2362 (bsd_uthread_solib_unloaded): Ditto.
2363 (bsd_uthread_target): Ditto.
2364 (_initialize_bsd_uthread): Declare.
2365 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
2366 (cris_frame_unwind_cache): Ditto.
2367 * frv-tdep.c (frv_return_value): Ditto.
2368 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
2369 (h8300h_use_struct_convention): Ditto.
2370 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
2372 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
2374 * hppabsd-tdep.c: Include hppabsd-tdep.h.
2375 (hppabsd_find_global_pointer): Make it static.
2376 * hppabsd-tdep.h: New.
2377 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
2378 (hppabsd_init_abi): Remove declaration.
2379 (_initialize_hppabsd_tdep): Remove declaration.
2380 (_initialize_hppanbsd_tdep): Declare.
2381 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
2382 (hppabsd_init_abi): Delete declaration.
2383 (hppaobsd_init_abi): Make it static.
2384 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
2385 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
2386 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
2387 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
2388 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
2389 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
2390 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
2391 (_initialize_m32c_tdep): Declare.
2392 * m32r-rom.c (_initialize_m32r_rom): Declare.
2393 * m32r-tdep.c (m32r_skip_prologue): Make it static.
2394 (m32r_return_value): Ditto.
2395 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
2396 (m68hc11_return_value): Ditto.
2397 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
2398 * m88k-tdep.c (m88k_frame_cache): Make it static.
2399 * mep-tdep.c (mep_gdb_print_insn): Ditto.
2400 (mep_return_value): Ditto.
2401 (_initialize_mep_tdep): Declare.
2402 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
2403 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
2404 (mips_linux_syscall_next_pc): Ditto.
2405 (_initialize_mips_linux_tdep): Declare.
2406 * mips-tdep.c (mips_single_step_through_delay): Make it static.
2407 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
2408 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
2409 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
2410 * mt-tdep.c (_initialize_mt_tdep): Declare.
2411 * nbsd-tdep.c: Include nbsd-tdep.h.
2412 * nto-tdep.c (find_load_phdr): Make it static.
2413 (_initialize_nto_tdep): Declare.
2414 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
2416 (_initialize_ppc_linux_tdep): Declare.
2417 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
2418 (m32r_insert_watchpoint, m32r_remove_watchpoint)
2419 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
2421 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
2422 * rs6000-nat.c: Include xcoffread.h.
2423 (find_toc_address): Don't extern declare get_toc_offset. Adjust
2424 to call xcoff_get_to_offset.
2425 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
2426 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
2427 (rs6000_skip_trampoline_code): Make static.
2428 * s390-tdep.c (s390_regset_from_core_section): Ditto.
2429 * sh-tdep.c (sh_register_reggroup_p): Ditto.
2430 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
2431 (_initialize_shnbsd_tdep): Declare.
2432 * solib-frv.c (displacement_from_map): Make static.
2433 (_initialize_frv_solib): Declare.
2434 * solib-irix.c (fetch_lm_info): Make static.
2435 (_initialize_irix_solib): Declare.
2436 * solib-som.c: Include solib-som.h.
2437 (som_solib_select): Line break.
2438 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
2439 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
2440 (_initialize_sparcnbsd_tdep): ... this.
2441 * spu-tdep.c (spu_software_single_step): Make it static.
2442 (_initialize_spu_tdep): Declare.
2443 * vax-tdep.c (vax_frame_cache): Make it static.
2444 * xcoffread.c: Include xcoffread.h.
2445 (get_toc_offset): Rename to ...
2446 (xcoff_get_toc_offset): ... this.
2447 (_initialize_xcoffread): Declare.
2449 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
2450 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
2452 (_initialize_xtensa_tdep): Declare.
2454 2008-02-21 Pedro Alves <pedro@codesorcery.com>
2456 Silence a few -Wmissing-prototypes warnings.
2459 * amd64-nat.c: Include "amd64-nat.h".
2460 * fork-child.c (_initialize_fork_child): Ditto.
2461 * gcore.c (_initialize_gcore): Ditto.
2462 * inf-ptrace.c: Include "inf-ptrace.h".
2463 (inf_ptrace_store_registers): Make it static.
2464 * linux-nat.c (linux_nat_terminal_ours): Make it static.
2465 (_initialize_linux_nat): Declare before definition.
2466 * linux-tdep.c: Include "linux-tdep.h".
2467 * linux-thread-db.c (_initialize_thread_db): Declare before
2469 * proc-service.c (_initialize_proc_service): Ditto.
2470 * remote.c (remote_send_printf): Make it static.
2471 * solib.c: Include "solib.h".
2472 * symfile-mem.c (_initialize_symfile_mem): Declare before
2474 * ada-lang.c (ada_la_decode, ada_match_name)
2475 (ada_suppress_symbol_printing, ada_is_array_type)
2476 (ada_value_ptr_subscript, ada_array_length)
2477 (ada_to_static_fixed_value): Make them static.
2478 (_initialize_ada_language): Declare before definition.
2479 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
2480 (ada_task_list_changed, ada_new_objfile_observer): Make them
2482 (_initialize_tasks): Declare before definition.
2483 * addrmap.c (_initialize_addrmap): Declare before definition.
2484 * auxv.c (default_auxv_parse): Make it static.
2485 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
2487 * breakpoint.c (remove_sal): Add line break.
2488 (expand_line_sal_maybe): Make it static.
2489 * cp-name-parser.y: Include "cp-support.h".
2490 * cp-valprint.c (cp_find_class_member): Make it static.
2491 * eval.c (value_f90_subarray): Ditto.
2492 * exceptions.c (print_any_exception): Ditto.
2493 * findcmd.c (_initialize_mem_search): Declare before definition.
2494 * frame.c (frame_observer_target_changed): Make it static.
2495 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
2496 * inf-child.c: Include "inf-child.h".
2497 * inferior.h (valid_inferior_id): Rename to ...
2498 (valid_gdb_inferior_id): ... this.
2499 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
2501 * jv-lang.c (java_language_arch_info): Make it static.
2502 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
2503 * osdata.c (info_osdata_command): Make it static.
2504 * regcache.c (regcache_observer_target_changed): Make it static.
2505 * reverse.c (_initialize_reverse): Declare before definition.
2506 * stabsread.c (cleanup_undefined_types_noname)
2507 (cleanup_undefined_types_1): Make them static.
2508 * symfile.c (place_section): Make it static.
2509 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
2510 * target-descriptions.c (_initialize_target_descriptions): Declare
2512 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
2513 (find_default_is_async_p, find_default_supports_non_stop): Make
2515 (target_supports_non_stop): Add prototype.
2516 (dummy_pid_to_str): Make it static.
2517 * utils.c (_initialize_utils): Declare before definition.
2518 * ada-exp.y (_initialize_ada_exp): Declare before definition.
2519 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
2520 * target.h (struct target_ops): Add a prototype to the
2521 to_can_execute_reverse callback.
2522 * macroscope.c (_initialize_macroscope): Declare before definition.
2523 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
2524 * python/python.c (_initialize_python): Declare before definition.
2525 * tui/tui-command.c: Include "tui/tui-command.h".
2526 * tui/tui-data.c (init_content_element, init_win_info): Make them
2528 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
2529 * tui/tui-interp.c (_initialize_tui_interp): Declare before
2531 * tui/tui-layout.c: Include "tui/tui-layout.h".
2532 (_initialize_tui_layout): Declare before definition.
2533 * tui/tui-regs.c: Include "tui/tui-regs.h".
2534 (tui_display_reg_element_at_line): Make it static.
2535 (_initialize_tui_regs): Declare before definition.
2536 * tui/tui-stack.c (_initialize_tui_stack): Declare before
2538 * tui/tui-win.c: Include "tui/tui-win.h".
2539 (_initialize_tui_win): Declare before definition.
2540 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
2541 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
2542 (tui_get_cmd_list): Add a prototype.
2543 * tui/tui-windata.c: Include tui-windata.h.
2544 * tui/tui-wingeneral.c (box_win): Make it static.
2545 * cli/cli-logging.c (show_logging_command): Make it static.
2546 (_initialize_cli_logging): Declare before definition.
2547 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
2550 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
2552 Extend use of i386_use_watchpoints to all i386 native files
2553 using hardware watchpoints.
2554 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
2555 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
2556 * windows-nat.c (init_windows_ops): Ditto.
2557 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
2558 * config/i386/nm-cygwin64.h: Ditto.
2559 * config/i386/nm-fbsd.h: Ditto.
2560 * config/i386/nm-go32.h: Ditto.
2562 2009-02-19 Joel Brobecker <brobecker@adacore.com>
2564 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
2566 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
2568 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
2569 (mi_interpreter_init): Register the above.
2570 * solib.c (clear_solib): Notify solib unload.
2571 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
2572 disable breakpoints on a.out targets.
2574 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
2576 * observer.c (observer_test_first_notification_function)
2577 (observer_test_second_notification_function)
2578 (observer_test_third_notification_function): Adjust prototype.
2580 2009-02-17 Pedro Alves <pedro@codesourcery.com>
2582 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
2583 (ALL_TARGET_OBS): Add dicos-tdep.o.
2584 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
2585 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
2587 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
2589 * dicos-tdep.h, dicos-tdep.c: New.
2590 * amd64-dicos-tdep.c: New.
2591 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
2592 inferior.h. Include dicos-tdep.h.
2593 (i386_dicos_init_abi): Call dicos_init_abi.
2594 (i386_dicos_bfd_has_symbol_p): Delete.
2595 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
2597 * NEWS: Mention x86-64 DICOS target support.
2599 2009-02-16 Doug Evans <dje@google.com>
2601 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
2602 All callers updated.
2603 (amd64_get_insn_details): Handle more 3-byte opcode insns.
2604 (amd64_breakpoint_p): Delete.
2605 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
2606 don't back up pc to the start of the int3.
2607 * i386-tdep.c: #include opcode/i386.h.
2608 (i386_skip_prefixes): New function.
2609 (i386_absolute_jmp_p): Constify argument.
2610 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
2611 (i386_breakpoint_p): Delete.
2612 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
2613 When fixing up after stepping an int3, don't back up pc to the start
2616 2009-02-16 Pedro Alves <pedro@codesourcery.com>
2618 * corelow.c (core_close): Don't hardcode the core's pid.
2619 (core_open): Find core threads before calling
2620 post_create_inferior.
2621 (add_to_thread_list, get_core_register_section): Take into account
2622 systems where the regset section names encode the pid of the
2625 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
2626 * gdbarch.h, gdbarch.c: Regenerate.
2628 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2629 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2630 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2631 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2633 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
2635 Include frame information for *stopped due to CLI commands.
2637 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
2638 * infcmd.c (finish_command_continuation): Pass '1' for
2639 'print_frame' parameter to the observer.
2640 * infrun.c (normal_stop): Don't print mi-specific information
2641 here. Pass 'stop_print_frame' to the 'print_frame' parameter
2643 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
2644 If we need to print frame, and current uiout is not the MI one,
2647 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
2649 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
2650 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
2652 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2655 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
2656 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
2658 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
2660 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
2661 for DW_ATE_signed_char and DW_ATE_unsigned_char
2662 for pascal language.
2664 2009-02-11 Jim Meyering <meyering@redhat.com>
2665 Jan Kratochvil <jan.kratochvil@redhat.com>
2667 Avoid NULL dereference.
2668 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
2669 New variable func_type.
2671 2009-02-11 Pedro Alves <pedro@codesourcery.com>
2673 * gdbarch.c: Regenerate.
2675 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
2677 * p-lang.c (is_pascal_string_type): Fix comment.
2678 Determine exact size of char elements for GPC
2680 (pascal_printstr): Handle char width of 2 or 4.
2681 * p-valprint.c (pascal_val_print): Handle char
2684 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
2686 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
2687 inside the loop. Only call addrmap_set_empty if the compilation unit
2688 had DW_AT_high_pc and DW_AT_low_pc. Update call to
2689 scan_partial_symbols.
2690 (scan_partial_symbols): Take NEED_PC argument and pass it along with
2692 (add_partial_namespace): Take NEED_PC argument and pass it through.
2693 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
2696 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2698 * NEWS: Mention inspecting extra signal information, $_siginfo,
2699 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
2701 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2703 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
2706 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2708 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
2709 (compat_timer_t, compat_clock_t, struct compat_timeval)
2710 (compat_sigval_t, compat_siginfo_t): New types.
2711 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
2712 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
2713 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
2714 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
2715 (amd64_linux_siginfo_fixup): New.
2716 * linux-nat.c (linux_nat_siginfo_fixup): New.
2717 (siginfo_fixup): New.
2718 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
2719 siginfo layout expected by ptrace and the siginfo layout of the
2721 (linux_nat_set_siginfo_fixup): New.
2722 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
2724 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2726 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
2727 * infrun.c (siginfo_value_read, siginfo_value_write): New.
2728 (siginfo_value_funcs): New.
2729 (siginfo_make_value): New.
2730 (_initialize_infrun): Create the $_siginfo convenience variable.
2731 * gdbtypes.h (append_composite_type_field_aligned): Declare.
2732 * gdbtypes.c (append_composite_type_field): Rename to...
2733 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
2734 argument. Handle it.
2735 (append_composite_type_field): Rewrite on top of
2736 append_composite_type_field_aligned.
2737 * value.h (internalvar_make_value): New typedef.
2738 (struct internalvar) <make_value>: New field.
2739 (create_internalvar_type_lazy): Declare.
2740 * value.c (create_internalvar): Clear make_value.
2741 (create_internalvar_type_lazy): New.
2742 (value_of_internalvar): If make_value is set use it.
2743 (preserve_values): Skip internal variables that don't have a
2745 * gdbarch.sh (get_siginfo_type): New.
2746 * gdbarch.h, gdbarch.c: Regenerate.
2748 * linux-tdep.h, linux-tdep.c: New.
2749 * amd64-linux-tdep.c: Include "linux-tdep.h".
2750 (amd64_linux_init_abi): Register linux_get_siginfo_type and
2751 linux_get_siginfo_mapper.
2752 * i386-linux-tdep.c: Include "linux-tdep.h".
2753 (i386_linux_init_abi): Register linux_get_siginfo_type and
2754 linux_get_siginfo_mapper.
2755 * arm-linux-tdep.c: Include "linux-tdep.h".
2756 (i386_linux_init_abi): Register linux_get_siginfo_type and
2757 linux_get_siginfo_mapper.
2759 * linux-nat.c (linux_xfer_siginfo): New.
2760 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2761 * remote.c (PACKET_qXfer_siginfo_read)
2762 (PACKET_qXfer_siginfo_write): New.
2763 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
2764 "qXfer:siginfo:write" features.
2765 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2766 (_initialize_remote): Add "set/show remote read-siginfo-object"
2767 and "set/show remote write-siginfo-object" commands.
2769 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
2770 (HFILES_NO_SRCDIR): Add linux-tdep.h.
2771 (ALLDEPFILES): Add linux-tdep.c.
2773 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
2774 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
2777 2009-02-06 Jim Blandy <jimb@codesourcery.com>
2778 Daniel Jacobowitz <dan@codesourcery.com>
2779 Vladimir Prus <vladimir@codesourcery.com>
2780 Pedro Alves <pedro@codesourcery.com>
2782 * defs.h (enum lval_type): New value: lval_computed.
2783 * value.h (struct lval_funcs): New type.
2784 (allocate_computed_value, value_computed_funcs)
2785 (value_computed_closure): New declarations.
2786 * value.c (struct value): Add a structure to the location union
2787 for computed lvalues, containing 'funcs' and 'closure' members.
2788 (allocate_computed_value, value_computed_funcs)
2789 (value_computed_closure): New functions.
2790 (value_free): For computed lvalues, call the closure's
2791 'free_closure' function before freeing the value itself.
2792 (value_copy): If we're copying an lval_computed value, call the
2793 closure's 'copy_closure' function.
2794 (set_value_component_location): If the original value is a
2795 computed lvalue, then call the closure's 'copy_closure' function.
2796 (value_of_internalvar): If an internal variable's value is a
2797 computed lvalue, make retrieving its value produce an equivalent
2799 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
2800 their read function.
2801 (value_assign): Assign to computed lvalues by calling their write
2804 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2806 * linux-nat.c (linux_nat_wait): Adjust.
2807 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
2808 * linux-nat.h (thread_db_init): Delete declaration.
2809 * linux-thread-db.c (target_beneath): Delete.
2810 (thread_db_init): Delete.
2811 (thread_db_detach): Use find_target_beneath.
2812 (thread_db_wait): Adjust interface. Use find_target_beneath.
2813 (thread_db_mourn_inferior): Use find_target_beneath.
2814 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
2815 (thread_db_async_mask): Delete.
2816 (thread_db_pid_to_str): Adjust interface. Use
2817 find_target_beneath.
2818 (thread_db_get_thread_local_address): Adjust interface. Use
2819 find_target_beneath.
2820 (init_thread_db_ops): Delete references to delete functions.
2821 * target.c (update_current_target): Don't inherit or default
2822 to_wait. Don't inherit to_pid_to_str and
2823 to_get_thread_local_address.
2824 (target_translate_tls_address): Look for a pushed target that
2825 implements to_get_thread_local_address, and use it instead of
2826 checking for target_get_thread_local_address_p.
2827 (target_wait, target_pid_to_str): Reimplement as functions.
2828 (dummy_pid_to_str): New.
2829 (init_dummy_target): Register it.
2830 (debug_to_wait): Delete.
2831 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
2832 to_get_thread_local_address accept a pointer to struct target_ops.
2833 (target_wait): Delete macro, and declare as function.
2834 (target_pid_to_str): Likewise.
2835 (target_get_thread_local_address)
2836 (target_get_thread_local_address_p): Delete.
2837 (noprocess): Add NORETURN and ATTR_NORETURN tags.
2838 * inf-ptrace.c (inf_ptrace_wait): Adjust.
2839 (inf_ptrace_pid_to_str): New.
2840 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
2841 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
2842 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
2843 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
2845 * corelow.c (core_pid_to_str): Adjust.
2846 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
2847 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
2848 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
2849 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
2850 * hpux-thread.c (hpux_thread_wait): Adjust.
2851 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
2852 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
2853 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
2854 * procfs.c (procfs_pid_to_str): Adjust.
2855 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
2856 * remote-mips.c (mips_wait): Adjust.
2857 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
2858 * remote.c (remote_wait, remote_pid_to_str)
2859 (remote_get_thread_local_address): Adjust.
2860 * rs6000-nat.c (rs6000_wait): Adjust.
2861 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
2862 (sol_thread_wait, solaris_pid_to_str): Adjust.
2863 * spu-linux-nat.c (spu_child_wait): Adjust.
2864 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2866 2009-02-06 Tom Tromey <tromey@redhat.com>
2868 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
2869 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
2870 (python-cmd.o): New target.
2871 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
2872 completer prototype.
2873 (add_cmd): Initialize destroyer member of cmd_list_element. Use
2874 make_symbol_completion_list_fn as completer.
2875 (delete_cmd): Call destroyer if one is set.
2876 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
2877 completer member. Add destroyer member.
2878 (set_cmd_completer): Add self parameter to
2879 completer prototype.
2880 * command.h (set_cmd_completer): Add cmd parameter to
2881 completer prototype.
2882 * completer.c (noop_completer, filename_completer,
2883 location_completer, expression_completer, command_completer): Adapt
2884 to new completer prototype.
2885 (complete_line_internal): Pass new parameter to completer function.
2886 * completer.h (noop_completer, filename_completer,
2887 location_completer, expression_completer, command_completer): Adapt
2888 prototypes to new completer prototype.
2889 * interps.c (interpreter_completer): Adapt to new completer
2891 * python/python-cmd.c: New file.
2892 * python/python-internal.h (gdbpy_initialize_commands): Add
2894 (gdbpy_doc_cst): Add forward declaration.
2895 * python/python.c (gdbpy_doc_cst): Declare.
2896 (_initialize_python): Call gdbpy_initialize_commands. Initialize
2898 * symtab.c (make_symbol_completion_list_fn): New function.
2899 * symtab.h (make_symbol_completion_list_fn): Add prototype.
2901 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2903 * target.c (target_get_osdata): Check for equal or higher than
2904 process_stratum, not dummy_stratum.
2906 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2908 * remote.c (extended_remote_can_run): Delete.
2909 (init_remote_ops): Don't register it.
2910 * target.c (target_get_osdata): Don't check for target_can_run.
2911 Instead any target that has already been pushed, otherwise
2912 fallback to the default run target.
2914 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2916 * target.c (target_create_inferior, target_detach)
2917 (target_mourn_inferior, target_attach, target_close): Do target
2919 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
2920 (debug_to_mourn_inferior, debug_to_close): Delete.
2921 (setup_target_debug): Adjust.
2923 2009-02-05 Pedro Alves <pedro@codesourcery.com>
2925 * target.h (target_stopped_data_address_p): Delete declaration,
2926 and don't define as macro.
2927 * target.c (target_stopped_data_address_p): Delete.
2929 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
2930 Tom Tromey <tromey@redhat.com>
2932 * python/python-utils.c (target_string_to_unicode): New function.
2933 * python/python-internal.h (target_string_to_unicode): New prototype.
2934 * python/python-value.c (valpy_string): New function.
2935 (value_object_methods): Add `string' entry.
2937 2009-02-05 Pedro Alves <pedro@codesourcery.com>
2939 * target.h (target_tid_to_str): Delete.
2940 * thread.c (print_thread_info, thread_apply_all_command)
2941 (thread_apply_command, thread_command, do_captured_thread_select):
2942 Use target_pid_to_str instead of target_tid_to_str.
2943 * linux-fork.c (delete_fork_command): Likewise.
2945 2009-02-05 Pedro Alves <pedro@codesourcery.com>
2947 * frame.c (has_stack_frames): Make public.
2948 (get_prev_frame): Don't allow a NULL this_frame anymore.
2949 * frame.h (has_stack_frames): Declare.
2950 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
2951 to get_prev_frame, instead start at get_current_frame.
2952 (varobj_create): Check has_stack_frames before getting any frame;
2953 eliminate one usage of deprecated_safe_get_selected_frame.
2955 2009-02-05 Tom Tromey <tromey@redhat.com>
2956 Thiago Jung Bauermann <bauerman@br.ibm.com>
2958 * python/python.c (GdbMethods): Move to bottom of file.
2959 (get_parameter, execute_gdb_command, gdbpy_write,
2960 gdbpy_flush): Remove forward declarations.
2961 (eval_python_from_control_command): Fix error checking of function
2962 PyRun_SimpleString. Fix error string.
2963 (python_command): Likewise.
2964 (execute_gdb_command): Added from_tty argument.
2966 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
2968 * language.h (language_dfn): Add la_get_string member.
2969 (LA_GET_STRING): New macro.
2970 (default_get_string): New prototype.
2971 * language.c (default_get_string): New function.
2972 (unknown_language_defn, auto_language_defn, local_language_defn): Use
2973 default_get_string for la_get_string.
2974 * c-lang.c (c_get_string): New function.
2975 (c_language_defn, cplus_language_defn, asm_language_defn): Use
2976 c_get_string for la_get_string.
2977 (minimal_language_defn): Likewise
2978 * ada-lang.c (ada_language_defn): Likewise.
2979 * f-lang.c (f_language_defn): Use default_get_string for
2981 * jv-lang.c (java_language_defn): Likewise.
2982 * m2-lang.c (m2_language_defn): Likewise.
2983 * objc-lang.c (objc_language_defn): Likewise.
2984 * p-lang.c (p_language_defn): Likewise.
2985 * scm-lang.c (scm_language_defn): Likewise.
2986 * typeprint.c (type_to_string): New function.
2987 * value.h (type_to_string): New prototype.
2988 * valprint.c (val_print_string): Factor out code for reading string
2989 from the inferior into its own function. Put 2 spaces after period
2991 (read_string): New function.
2992 * valprint.h (read_string): New prototype.
2994 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
2995 Tom Tromey <tromey@redhat.com>
2997 PR breakpoints/8079:
2998 * breakpoint.c (print_one_breakpoint): Use exp_string field
2999 to display expression of watchpoints.
3000 (mention): Likewise.
3001 (watch_command_1): Remove trailing whitespace from expression.
3002 * printcmd.c (struct display) <exp_string>: New field.
3003 (display_command): Set exp_string.
3004 (free_display): Free exp_string.
3005 (clear_displays): Use free_display.
3006 (do_one_display): Print exp_string.
3007 (display_info): Likewise.
3009 2009-02-04 Tom Tromey <tromey@redhat.com>
3010 Thiago Jung Bauermann <bauerman@br.ibm.com>
3011 Phil Muldoon <pmuldoon@redhat.com>
3013 * python/python-internal.h (gdbpy_get_value_from_history): Rename
3014 prototype to gdbpy_history.
3015 (gdbpy_is_string): Declare.
3016 (python_string_to_host_string): Declare.
3017 * python/python-utils.c (gdbpy_is_string): New function.
3018 (unicode_to_encoded_string): New function.
3019 (unicode_to_target_string): Use it.
3020 (python_string_to_host_string): New function.
3021 * python/python-value.c (valpy_address): New function.
3022 (convert_value_from_python): Use gdbpy_is_string. Change to throw
3023 Python exception instead of a GDB exception on error. Properly check
3025 (valpy_getitem): Convert field name to host string. Handle array
3026 accesses. Adapt to new behaviour of convert_value_from_python.
3027 (valpy_new): Adapt to new behaviour of convert_value_from_python.
3028 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
3029 VALPY_BITXOR, VALPY_BITOR>: New constants.
3030 (valpy_binop): Update. Adapt to new behaviour of
3031 convert_value_from_python.
3032 (valpy_invert): New function.
3033 (valpy_lsh): Likewise.
3034 (valpy_rsh): Likewise.
3035 (valpy_and): Likewise.
3036 (valpy_or): Likewise.
3037 (valpy_xor): Likewise.
3038 (valpy_richcompare): Call convert_value_from_python instead of doing
3040 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
3041 (gdbpy_get_value_from_history): Rename
3042 function to gdbpy_history.
3043 (gdbpy_initialize_values): Don't set tp_new.
3044 (value_object_type): Add valpy_new.
3045 (value_object_methods): Add `address' entry.
3046 (value_object_as_number): Update for new methods.
3047 * python/python.c (GdbMethods): Rename entry from
3048 `get_value_from_history' to `history'.
3050 2009-02-04 Jerome Guitton <guitton@adacore.com>
3052 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
3053 of type to guard against a crash.
3055 2009-02-04 Jerome Guitton <guitton@adacore.com>
3057 * value.c (value_from_contents_and_address): Always return
3058 a lval_memory value, even if address is null.
3060 2009-02-04 Tristan Gingold <gingold@adacore.com>
3062 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
3063 (amd64_darwin_sigcontext_addr): Ditto.
3064 (darwin_dwarf_signal_frame_p): Ditto.
3065 (i386_darwin_init_abi): Handle signal frames, use the const for
3067 (x86_darwin_init_abi_64): Ditto.
3069 2009-02-04 Tristan Gingold <gingold@adacore.com>
3071 * i386-tdep.c (i386_sigtramp_p): Make it public.
3072 * i386-tdep.h (i386_sigtramp_p): Declare.
3074 2009-02-04 Tristan Gingold <gingold@adacore.com>
3076 * machoread.c (macho_symfile_read): Read minsymtab also from
3078 (macho_symfile_read): Try to read dwarf2 frame info from main
3079 object file, but not from OSO files.
3080 (macho_symfile_offsets): Update section names for latest BFD
3082 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
3083 (x86_darwin_init_abi_64): Ditto.
3084 * solib-darwin.c: New file.
3085 * solib-darwin.h: New file.
3086 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
3088 2009-02-04 Tristan Gingold <gingold@adacore.com>
3090 * solist.h (struct target_so_ops): Comment fallback behavior for
3093 2009-02-03 Tom Tromey <tromey@redhat.com>
3095 * completer.c (add_struct_fields): Check type_name against NULL
3098 2009-02-03 Joel Brobecker <brobecker@adacore.com>
3100 * MAINTAINERS: Update Elena's email address.
3102 2009-02-02 Joel Brobecker <brobecker@adacore.com>
3104 * breakpoint (update_watchpoint): Minor comment adjustment.
3106 2009-02-02 Tom Tromey <tromey@redhat.com>
3109 * completer.c (count_struct_fields): Count method names.
3110 (add_struct_fields): Add matching method names.
3112 2009-02-02 Doug Evans <dje@google.com>
3114 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
3115 doing any further tcl/tk configury. Don't configure gdbtk if
3116 tcl or tk check fails.
3117 * aclocal.m4: Regenerate.
3118 * configure: Regenerate.
3120 2009-02-02 Tom Tromey <tromey@redhat.com>
3123 * valops.c (find_overload_match): Follow typedefs before taking
3124 address of object argument.
3126 2009-02-01 Doug Evans <dje@google.com>
3128 * target.h (target_waitstatus_to_string): Declare.
3129 * target.c (target_waitstatus_to_string): New function. Copied from
3130 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
3131 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
3132 TARGET_WAITKIND_NO_HISTORY.
3133 (debug_to_wait): Call it.
3134 * infrun.c (wait_for_inferior): If debug_infrun, print result of
3136 (fetch_inferior_event): Ditto.
3138 2009-01-30 Tom Tromey <tromey@redhat.com>
3140 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
3142 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3145 * thread.c (do_captured_list_thread_ids): Report the current
3148 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3150 * breakpoint.c (create_breakpoint, create_breakpoints)
3151 (break_command_really, set_breakpoint): New parameter enabled.
3152 (create_breakpoint, break_command_really): Make breakpoint
3153 disabled if so requested.
3154 * breakpoint.h (set_breakpoint): New parameter enabled.
3155 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
3157 2009-01-28 Doug Evans <dje@google.com>
3159 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
3160 (amd64_displaced_step_fixup): Declare.
3161 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
3162 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
3163 and make static global.
3164 (amd64_arch_regmap_len): New static global.
3165 (amd64_arch_reg_to_regnum): New function.
3166 (struct amd64_insn): New struct.
3167 (struct displaced_step_closure): New struct.
3168 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
3169 (rex_prefix_p,skip_prefixes)
3170 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
3171 (amd64_insn_length,amd64_get_unused_input_int_reg)
3172 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
3173 (amd64_displaced_step_copy_insn)
3174 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
3175 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
3176 (amd64_displaced_step_fixup): New functions.
3177 * amd64-linux-tdep.c: #include arch-utils.h.
3178 (amd64_linux_init_abi): Install displaced stepping support.
3180 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
3181 Jerome Guitton <guitton@adacore.com>
3183 * configure, config.in: Regenerated.
3184 * configure.ac: Add --with-system-gdbinit.
3185 * main.c (get_init_files): New.
3186 (captured_main): Use get_init_files. Load system gdbinit before
3188 (print_gdb_help): Print location of init files.
3190 2009-01-28 Pedro Alves <pedro@codesourcery.com>
3192 * corefile.c (generic_search): Delete disabled code.
3193 * gdbcore.h (generic_search): Delete declaration.
3195 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3197 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
3198 parent to the child.
3199 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
3200 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
3201 remove_breakpoints to remove breakpoints from the parent.
3203 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3205 PR backtrace/9458, PR backtrace/8864:
3206 * frame.c (create_new_frame): Update the frame's cached PC before
3207 finding its unwinder. Use frame_id_build to build the new frame's
3209 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
3210 array values from the ``args'' array values.
3212 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3214 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
3215 (create_array_type, create_set_type, init_flags_type)
3216 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
3217 with a call to XZALLOC or XCALLOC, and pairs of calls to
3218 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
3220 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3222 Add "maint set|show internal-error|internal-warning quit|corefile
3223 ask|yes|no" commands.
3226 * utils.c (internal_problem_ask, internal_problem_yes)
3227 (internal_problem_no, internal_problem_modes): New.
3228 (struct internal_problem): Remove FIXME. Make should_quit and
3229 should_dump_core types to char *.
3230 (internal_vproblem, internal_error_problem)
3231 (internal_warning_problem): Adjust.
3232 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
3234 (add_internal_problem_command): New.
3235 (_initialize_utils): New.
3237 2009-01-25 Pedro Alves <pedro@codesourcery.com>
3239 * infcmd.c (program_info): Use paddress instead of casting stop_pc
3242 2009-01-24 Pedro Alves <pedro@codesourcery.com>
3244 * infrun.c (normal_stop): Don't call
3245 deprecated_update_frame_pc_hack.
3246 * frame.c (deprecated_update_frame_pc_hack)
3247 (deprecated_update_frame_base_hack): Delete, and ...
3248 (create_new_frame): ... inline here.
3249 * frame.h (deprecated_update_frame_pc_hack)
3250 (deprecated_update_frame_base_hack): Delete declarations.
3252 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3254 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
3255 * cli/cli-setshow.c (do_setshow_command): Handle it.
3256 * command.h (enum var_types): Add var_zuinteger.
3257 (add_setshow_zuinteger_cmd): Declare.
3259 * valprint.c (_initialize_valprint): Change the set input-radix
3260 and set output-radix commands to zuinteger type.
3262 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3265 * infrun.c (normal_stop): Tag threads as stopped, and run the
3266 hook-stop before printing the stack frame.
3268 2009-01-22 Pedro Alves <pedro@codesourcery.com>
3271 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
3274 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
3276 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
3279 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
3282 * infcmd.c (signal_command): Do not specify a resume PC.
3284 2009-01-19 Doug Evans <dje@google.com>
3286 * dummy-frame.c (dummy_frame): Replace regcache member with
3288 (dummy_frame_push): Replace caller_regcache arg with caller_state.
3289 All callers updated.
3290 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
3291 (dummy_frame_pop): Rewrite. Verify requested frame is in the
3292 dummy frame stack. Restore program state.
3293 (cleanup_dummy_frames): Rewrite.
3294 (dummy_frame_sniffer): Update. Make static.
3295 * dummy-frame.h (regcache,frame_info): Delete forward decls.
3296 (inferior_thread_state): New forward decl.
3297 (dummy_frame_push): Update prototype.
3298 * frame.c (frame_pop): dummy_frame_pop now does all the work for
3300 * infcall.c (breakpoint_auto_delete_contents): Delete.
3301 (get_function_name,run_inferior_call): New fns.
3302 (call_function_by_hand): Simplify by moving some code to
3303 get_function_name, run_inferior_call. Inferior function call wrapped
3304 in TRY_CATCH so there's less need for cleanups and all exits from
3305 proceed are handled similarily. Detect program exit.
3306 Detect program stopping in a different thread.
3307 Make error messages more consistent.
3308 * inferior.h (inferior_thread_state): Declare (opaque type).
3309 (save_inferior_thread_state,restore_inferior_thread_state,
3310 make_cleanup_restore_inferior_thread_state,
3311 discard_inferior_thread_state, get_inferior_thread_state_regcache):
3313 (save_inferior_status): Update prototype.
3314 * infrun.c: (normal_stop): When stopped for the completion of an
3315 inferior function call, verify the expected stack frame kind.
3316 (inferior_thread_state): New struct.
3317 (save_inferior_thread_state,restore_inferior_thread_state,
3318 do_restore_inferior_thread_state_cleanup,
3319 make_cleanup_restore_inferior_thread_state,
3320 discard_inferior_thread_state,
3321 get_inferior_thread_state_regcache): New functions.
3322 (inferior_status): Move stop_signal, stop_pc, registers to
3323 inferior_thread_state. Remove restore_stack_info.
3324 (save_inferior_status): Remove arg restore_stack_info.
3325 All callers updated. Remove saving of state now saved by
3326 save_inferior_thread_state.
3327 (restore_inferior_status): Remove restoration of state now done by
3328 restore_inferior_thread_state.
3329 (discard_inferior_status): Remove freeing of registers, now done by
3330 discard_inferior_thread_state.
3332 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3334 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
3335 at a time, times NUM_TO_SCROLL.
3336 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
3337 fetch the selected frame if there is no stack.
3339 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3342 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
3344 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
3345 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
3346 is thrown while handling an event, finish the thread state.
3347 (normal_stop): Use finish_thread_state cleanup.
3348 * infcmd.c (run_command_1): If an error is thrown while starting
3349 the inferior, finish the thread state.
3351 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3353 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
3354 skip breakpoints without a location (pending breakpoints).
3356 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3359 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
3361 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
3363 * thread.c (thread_command): Move call to annotate_thread_changed
3365 (do_captured_thread_select): ... here, to avoid printing an
3366 annotation if the thread change generates an exception.
3368 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3370 * NEWS: Document x86_64/MinGW as a new native configuration.
3372 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3374 * NEWS: Move the documentation of "info os processes" to
3375 the appropriate section (documenting the new commands).
3377 2009-01-15 Doug Evans <dje@google.com>
3379 * target.h (target_signal_to_string): Make return type const char *.
3380 (target_signal_to_name): Ditto.
3381 (target_signal_from_name): Make arg const char *.
3382 * infrun.c (sig_print_info): Update.
3383 * signals/signals.c (signals): Make array and struct members const.
3384 (target_signal_to_string): Make return type const char *.
3385 (target_signal_to_name): Ditto.
3386 (target_signal_from_name): Make arg const char *.
3388 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3389 Tristan Gingold <gingold@adacore.com>
3391 * solist.h (struct target_so_ops): New member bfd_open.
3392 (solib_find): Add prototype.
3393 (solib_bfd_fopen): Add prototype.
3394 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
3395 from solib_bfd_open.
3396 (solib_bfd_open): Use ops->bfd_open override if present. Call
3397 solib_find and solib_bfd_open otherwise.
3399 * objfiles.h (OBJF_KEEPBFD): New define.
3400 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
3401 objfile flag is set.
3402 * solib.c (symbol_add_stub): Do not allocate second BFD for
3403 shared library; use OBJF_KEEPBFD flag on solib objfile.
3405 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3407 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
3409 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3411 * value.h (address_of_variable): Add prototype.
3412 (locate_var_value): Remove prototype.
3414 * findvar.c (read_var_value): Do not attempt to default frame
3416 (locate_var_value): Remove function.
3417 * valops.c (value_of_variable): Retrieve selected frame for
3418 symbols that require a frame when called with NULL block.
3419 * valops.c (address_of_variable): New function.
3421 * eval.c (evaluate_subexp_for_address): Call address_of_variable
3422 instead of calling locate_var_value.
3423 (evaluate_subexp_with_coercion): Likewise.
3425 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
3427 * NEWS: Document "define" for prefixed commands.
3428 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
3429 show_user_1 for prefix commands.
3430 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
3431 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
3432 commands. Return the containing command list.
3433 (define_command, document_command): Update to handle prefix commands.
3434 (show_user_1): Add prefix and name arguments. Handle prefix
3436 * cli/cli-script.h (show_user_1): Update prototype.
3438 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
3440 * mingw-ser.c (console_select_thread): Add return to make
3442 (pipe_select_thread): Likewise.
3443 (file_select_thread): Likewise.
3445 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3447 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
3450 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3452 * remote.c (extended_remote_mourn_1): Invalidate our notion of
3453 current general thread.
3455 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3457 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
3458 without a live selected thread.
3460 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3462 Update the copyright notice of some of the files I missed
3463 in the previous copyright update.
3465 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3467 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
3468 base address instead of casting it to DWORD.
3470 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
3472 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
3473 for NULL frame pointers.
3475 2009-01-13 Mark Kettenis <kettenis@gnu.org>
3477 * utils.c (host_address_to_string): Reimplement in a way that
3478 avoids the cast of the address to long.
3480 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3482 * mdebugread.c (parse_symbol): Save the symbol private data
3483 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
3484 (psymtab_to_symtab_1): Likewise.
3485 (parse_procedure): Declare variable "e" only in the scope
3486 where it is used. Extract the symbol private data using
3489 2009-01-13 Jim Blandy <jimb@codesourcery.com>
3491 Abstract out common code for copying value locations.
3493 * value.h (set_value_component_location): New declaration.
3494 * value.c (set_value_component_location): New function.
3495 (value_primitive_field): Use it.
3496 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
3497 * valops.c (search_struct_field, value_slice): Same.
3498 * ada-lang.c (coerce_unspec_val_to_type)
3499 (ada_value_primitive_packed_val): Same.
3501 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3503 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
3505 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
3507 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
3509 * i386-cygwin-tdep.c: Ditto.
3510 * i386-windows-nat.c: Ditto.
3511 * windows-nat.h: Ditto.
3512 * windows-tdep.c: Ditto.
3513 * windows-tdep.h: Ditto.
3514 * windows-nat.c: Ditto.
3515 (cygwin_load_start): Redefine as CORE_ADDR.
3516 (cygwin_load_end): Ditto.
3517 (windows_make_so): Coerce result of address arithmetic to uintptr_t
3518 before coercing to CORE_ADDR to avoid a compiler warning.
3519 (handle_exception): Define addr as CORE_ADDR and coerce
3520 ExceptionAddress to uintptr_t before assigining to avoid a compiler
3522 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
3525 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3527 Fix linking with --enable-targets=all:
3528 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
3529 (HFILES_NO_SRCDIR): Add windows-tdep.h.
3530 (ALLDEPFILES): Add windows-tdep.c.
3532 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
3534 * win32-nat.h: Delete.
3535 * windows-nat.h: Rename from win32-nat.h.
3536 * win32-nat.c: Delete.
3537 * windows-nat.c: Rename from win32-nat.c.
3538 * win32-termcap.c: Delete.
3539 * windows-termcap.c: Rename from win32-termcap.c.
3540 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
3541 * configure.ac: Handle rename from win32-termcap.c ->
3543 * configure: Regenerate.
3544 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
3545 -> windows-termcap.c.
3546 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
3548 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
3549 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
3551 (win32_make_so): Handle cygwin compiler warning due to change of
3552 load_addr from DWORD to LPVOID.
3553 (handle_load_dll): Use %p in format string to properly print address
3554 and avoid a compiler warning.
3555 (DEBUG_EXCEPTION_SIMPLE): Ditto.
3556 (handle_exception): Ditto.
3557 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
3558 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
3560 * config/i386/mingw.mh: Ditto.
3561 * config/i386/mingw64.mh: Ditto.
3563 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3565 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
3566 arrayprint_recurse_level to a parameter. Update all the callers. New
3567 comment at autovariables.
3569 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3571 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
3574 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3576 * target.c (target_xfer_partial): Use host_address_to_string to
3577 print the address of readbuf and writebuf. Cast the address of
3578 elements inside the myaddr buffer into intptr_t.
3579 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
3580 Cast the address of elements inside the myaddr buffer into
3583 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3585 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
3586 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
3587 * configure.host, configure.tgt: Add handling for x86_64/windows.
3588 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
3589 and amd64-windows-tdep.c.
3591 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3593 * win32-tdep.h, win32-tdep.c: New files.
3594 * i386-cygwin-tdep.h: Delete.
3595 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
3597 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
3598 * win32-nat.c: Likewise.
3599 * configure.tgt: Add win32-tdep.o to the list of target object
3600 files for i386-cygwin and i386-mingw targets.
3602 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3604 * win32-nat.h: New file.
3605 * win32-nat.c (mappings): Initialize to NULL.
3606 (win32_set_context_register_offsets): New function.
3607 * i386-windows-nat.c: New file.
3608 (mappings): Moved here from win32-nat.c.
3609 (_initialize_i386_windows_nat): New function.
3610 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
3611 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
3613 2009-01-09 Andreas Schwab <schwab@suse.de>
3615 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
3617 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
3619 * gdbtypes.c (append_composite_type_field): Correct the location of
3622 2009-01-09 Pedro Alves <pedro@codesourcery.com>
3624 * defs.h (deprecated_error_hook): Delete declaration.
3625 * interps.c (clear_interpreter_hooks): Adjust.
3626 * remote-sim.c (gdb_os_error): Don't try to call
3627 deprecated_error_hook. No need to call exit anymore.
3628 * top.c (deprecated_error_hook): Delete.
3630 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3632 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
3633 to print the address of the gdbarch pointer.
3635 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3637 * gdbarch.sh: Fix all the compilation errors on amd64-windows
3638 due to casting a pointer to a long when printing a function
3639 address. Instead, use host_address_to_string to convert our
3640 address to a string.
3641 * gdbarch.c: Regenerate.
3643 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3645 * event-top.c (async_disconnect, async_stop_sig): use "raise"
3646 instead of "kill" to raise a signal.
3648 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3650 * win32-nat.c (get_module_name): Change the type of parameter
3651 "base_address" to LPVOID. Remove unnecessary cast.
3652 (struct lm_info): Change type of load_addr to LPVOID.
3653 (win32_make_so): Change the type of parameter "load_addr"
3654 to LPVOID. Remove some unnecessary casts.
3655 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
3656 (win32_xfer_shared_libraries): Add missing cast.
3658 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3660 * win32-nat.c (has_detach_ability, set_process_privilege):
3661 Cast the result of GetProcAddress to (void *) to avoid
3662 a compilation warning.
3664 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3666 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
3669 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3671 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
3672 definition of local variable "done".
3673 (info_w32_command, handle_exception): Remove unnecessary cast.
3675 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3677 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
3678 DebugSetProcessKillOnExit. Update all uses in this file.
3679 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
3680 Update all uses in this file.
3682 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3684 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
3685 and use it when pushing the target.
3686 (win32_attach, win32_create_inferior): Update call to
3687 do_initial_win32_stuff.
3688 (win32_detach, win32_mourn_inferior): Use our ops parameter
3689 instead of the global win32_ops to unpush the target.
3691 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3693 * ser-mingw.c (ser_windows_open): Use proper type when casting
3694 in call to _open_osfhandle.
3696 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
3698 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
3700 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3702 * CONTRIBUTE: Minor reformatting.
3704 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
3706 * MAINTAINERS: Add myself to Write After Approval.
3707 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
3710 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
3712 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
3713 Call exit to make it obvious to GCC.
3715 2009-01-08 Tom Tromey <tromey@redhat.com>
3717 PR breakpoints/9350:
3718 * varobj.c (varobj_invalidate): Unconditionally free
3720 * symfile.c (syms_from_objfile): Free local_addr when returning
3722 * exec.c (exec_file_attach): Do cleanups before returning.
3723 (exec_file_command): Likewise.
3724 * corefile.c (reopen_exec_file): Do cleanups before returning.
3725 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
3727 (do_vec_free): New function.
3728 (update_global_location_list): Make a cleanup for old_locations.
3729 Do cleanups before returning. Remove unused variable 'e'.
3730 (find_condition_and_thread): Free result of parsing the
3732 (print_it_typical): Do cleanups before returning.
3733 (breakpoint_re_set_one): Always free sals.sals.
3735 2009-01-08 Joel Brobecker <brobecker@adacore.com>
3736 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3738 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
3741 2009-01-07 Doug Evans <dje@google.com>
3743 * top.c (gdb_prompt_string): Delete, unused.
3745 2009-01-07 Pedro Alves <pedro@codesourcery.com>
3747 Delete ONE_PROCESS_WRITETEXT leftovers.
3749 * breakpoint.c (insert_bp_location): Delete process_warning
3751 (insert_breakpoint_locations): Adjust.
3752 (reattach_breakpoints): Adjust.
3753 * infrun.c (normal_stop): Drop "It might be running in another
3756 2009-01-07 Stan Shebs <stan@codesourcery.com>
3758 * config/pa/linux.mh (XDEPFILES): Remove.
3760 2009-01-07 Doug Evans <dje@google.com>
3762 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
3764 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
3766 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
3767 spacing, a regression from 2008-04-22.
3769 2009-01-07 Joel Brobecker <brobecker@adacore.com>
3771 * utils.c (gdb_print_host_address): Adjust implementation to
3772 reuse host_address_to_string. Move comment explaining the conversion
3773 from host address to string from here...
3774 (host_address_to_string): ... to there.
3776 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3778 * MAINTAINERS: Add myself for write after approval privileges.
3780 2009-01-06 Tom Tromey <tromey@redhat.com>
3782 * value.c (set_internalvar): Use value_free, not xfree.
3784 2009-01-06 Jim Blandy <jimb@red-bean.com>
3786 Check return values of functions declared with warn_unused_result
3787 attribute in GLIBC 2.8.
3788 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
3789 * inflow.c (check_syscall): New function.
3790 (new_tty): Use check_syscall to check return values from open and dup.
3791 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
3792 * main.c (captured_main): Call cwd after setting up gdb_stderr;
3793 check for errors from getcwd.
3794 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
3795 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
3796 (stdio_file_fputs): Same.
3797 * utils.c (internal_vproblem): abort if last-ditch error message
3800 * top.c (gdb_init): Don't set the current directory here; that's
3801 already been done in captured_main.
3803 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
3805 * ser-tcp.c: Adjust includes.
3806 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
3807 (tcp_auto_retry, tcp_retry_limit): Declare.
3808 (TIMEOUT): Remove, in favor of tcp_retry_limit.
3809 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
3810 (wait_for_connect): New function.
3811 (net_open): Use it. Add auto-retry logic.
3812 (set_tcp_cmd, show_tcp_cmd): New functions.
3813 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
3814 and "set/show tcp connect-timeout" commands.
3815 * NEWS: Document new commands.
3817 2009-01-05 Tom Tromey <tromey@redhat.com>
3819 * python/python-internal.h (Py_ssize_t): Define as int.
3821 2009-01-05 Jim Blandy <jimb@red-bean.com>
3823 * MAINTAINERS: Fix my e-mail address as steering committee member.
3825 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3827 Updated copyright notices for most files.
3829 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3831 * top.c (print_gdb_version): Update copyright year.
3833 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3835 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
3837 2009-01-01 Pedro Alves <pedro@codesourcery.com>
3839 PR breakpoints/9681:
3840 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
3841 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
3842 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
3843 retrow all other exceptions.
3845 For older changes see ChangeLog-2008.
3851 version-control: never