gdb/ChangeLog

   1 2008-03-12  Alan Modra  <amodra@bigpond.net.au>
   2
   3         PR 5900
   4         * elfread.c (elf_symtab_read): Make shndx an unsigned int.
   5         * mipsread.c: Include elf/internal.h.
   6         (read_alphacoff_dynamic_symtab): Map external reserved sym_shndx
   7         to internal range.
   8
   9 2008-03-11  Markus Deuling  <deuling@de.ibm.com>
  10
  11         * win32-nat.c (do_win32_fetch_inferior_registers): Use get_regcache_arch
  12         to get at the current architecture and at the target specific vector.
  13         Add target specific vector to I387_FISEG_REGNUM and I387_FOP_REGNUM and
  14         remove define of I387_ST0_REGNUM.
  15
  16         * amd64-tdep.c (I387_ST0_REGNUM): Remove define.
  17
  18         (amd64_supply_fxsave, amd64_collect_fxsave): Use get_regcache_arch to
  19         get at the current architecture
  20         (I387_FISEG_REGNUM, I387_FOSEG_REGNUM): Add target specific vector as
  21         parameter.
  22
  23         * i386-tdep.c: Remove various define's and undef's of I387_ST0_REGNUM,
  24         I387_NUM_XMM_REGS and I387_MM0_REGNUM.
  25
  26         (I387_NUM_XMM_REGS, I387_XMM0_REGNUM, I387_MXCSR_REGNUM,
  27         I387_ST0_REGNUM, I387_FCTRL_REGNUM, I387_MM0_REGNUM,
  28         (I387_FSTAT_REGNUM): Add target specific vector as parameter.
  29
  30         (i386_register_name, i386_dbx_reg_to_regnum): Use gdbarch_tdep to get
  31         at the target specific vector.
  32
  33         (i386_get_longjmp_target): Use get_frame_arch to get at the current
  34         architecture. Use gdbarch_tdep to get at the target specific vector.
  35
  36         (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as parameter and
  37         update caller. Use gdbarch_tdep to get at the target specific vector.
  38
  39         (i386_register_to_value: Use get_frame_arch to get at the current
  40         architecture.
  41
  42         * i386-tdep.h (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as
  43         parameter.
  44
  45         * i387-tdep.c (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
  46         I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM
  47         I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_ST0_REGNUM, FSAVE_ADDR,
  48         FXSAVE_ADDR, I387_XMM0_REGNUM): Add target specific vector as parameter.
  49
  50         (I387_ST0_REGNUM, I387_NUM_XMM_REGS): Remove various define's and
  51         undef's.
  52
  53         (i387_convert_register_p, i387_register_to_value,
  54         i387_value_to_register): Update call for i386_fp_regnum_p.
  55
  56         * i387-tdep.h: Remove comment.
  57         (I387_ST0_REGNUM, I387_NUM_XMM_REGS, I387_MM0_REGNUM): Add define.
  58         (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
  59         I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM,
  60         I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_XMM0_REGNUM,
  61         I387_MXCSR_REGNUM): Add target specific vector as parameter.
  62
  63 2008-03-10  Daniel Jacobowitz  <dan@codesourcery.com>
  64
  65         * Makefile.in (fork-child.o): Update.
  66         * NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
  67         argument.  Gather all gdbserver features together.
  68         * fork-child.c (exec_wrapper): New variable.
  69         (fork_inferior): Use it.
  70         (startup_inferior): Skip an extra trap if using "set exec-wrapper".
  71         (unset_exec_wrapper_command, _initialize_fork_child): New.
  72
  73 2008-03-10  Hidetaka Takano  <hidetaka.takano@glb.toshiba.co.jp>
  74
  75         * source.c (directory_command): Modify the determination of
  76         condition of terminal "from_tty".
  77
  78 2008-03-10  Matt Rice  <ratmice@gmail.com>
  79
  80         * dwarf2read.c (set_cu_language): Add DW_LANG_ObjC.
  81
  82 2008-03-10  Hidetaka Takano  <hidetaka.takano@glb.toshiba.co.jp>
  83
  84         * spu-tdep.c (info_spu_event_command): Insert a '\0' to the end
  85         of the data passing to strtoulst function.
  86         (info_spu_signal_command): Likewise.
  87
  88 2008-03-08  Vladimir Prus  <vladimir@codesourcery.com>
  89
  90         * mi/mi-interp.c (mi_command_loop): Remove
  91         commented-out code.
  92
  93 2008-03-07  Joel Brobecker  <brobecker@adacore.com>
  94
  95         * remote.c (extended_remote_attach_1): Make local variable pid an int
  96         instead of a pid_t.
  97
  98 2008-03-07  Joel Brobecker  <brobecker@adacore.com>
  99
 100         * solib-svr4.c (svr4_same_1): New function, originally extracted
 101         from svr4_same and expanded to handle the sparc64 case.
 102         (svr4_same): Move up and reimplement using svr4_same_1.
 103         (enable_break): Use svr4_same_1 to do shared library name comparisons.
 104
 105 2008-03-07  Ramana Radhakrishnan  <ramana.r@gmail.com>
 106
 107         * MAINTAINERS: Move self to Paper trail.
 108
 109 2008-03-05  Daniel Jacobowitz  <dan@codesourcery.com>
 110
 111         * Makefile.in (mingw-hdep.o, posix-hdep.o, remote-fileio.o): Update.
 112         * event-loop.c (call_async_signal_handler): New.
 113         * event-loop.h (call_async_signal_handler)
 114         (gdb_call_async_signal_handler): Declare.
 115         (mark_async_signal_handler): Add comments.
 116         * event-top.c (handle_sigint): Use gdb_call_async_signal_handler.
 117         * mingw-hdep.c (sigint_event, sigint_handler): New.
 118         (gdb_select): Use them.  Wait for the readline signal handler
 119         to finish.
 120         (gdb_call_async_signal_handler, _initialize_mingw_hdep): New functions.
 121         * posix-hdep.c (gdb_call_async_signal_handler): New function.
 122         * remote-fileio.c (sigint_fileio_token, async_remote_fileio_interrupt):
 123         New.
 124         (remote_fileio_ctrl_c_signal_handler): Use
 125         gdb_call_async_signal_handler.
 126         (initialize_remote_fileio): Initialize sigint_fileio_token.
 127         * remote.c (initialize_sigint_signal_handler, handle_remote_sigint): Do
 128         not initialize tokens here.
 129         (handle_remote_sigint_twice): Likewise.  Reinstall
 130         handle_remote_sigint.
 131         (async_remote_interrupt_twice): Just call interrupt_query.
 132         (cleanup_sigint_signal_handler): Do not delete tokens.
 133         (remote_interrupt, remote_interrupt_twice): Use
 134         gdb_call_async_signal_handler.
 135         (interrupt_query): Reinstall the default signal handler.
 136         (_initialize_remote): Initialize tokens here.
 137
 138 2008-03-04  Joel Brobecker  <brobecker@adacore.com>
 139
 140         * features/rs6000/power-core.xml, features/rs6000/power64-core.xml,
 141         features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
 142         Change the type of the lr register to code_ptr.
 143         * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
 144         features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
 145         features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
 146         features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
 147         features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
 148         features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
 149         features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: Regenerate.
 150
 151 2008-03-03  James E. Wilson  <wilson@tuliptree.org>
 152
 153         * MAINTAINERS: Update my email address.
 154
 155 2008-03-03  Keith Seitz  <keiths@redhat.com>
 156
 157         From Dave Murphy  <davem@devkitpro.org>:
 158         * configure.ac: Set tcl configdir to win under mingw.
 159         * configure: Regenerate.
 160
 161 2008-03-03  Daniel Jacobowitz  <dan@codesourcery.com>
 162
 163         * breakpoint.c (fetch_watchpoint_value): New function.
 164         (update_watchpoint): Set and clear val_valid.  Use
 165         fetch_watchpoint_value.  Handle unreadable values on the
 166         value chain.  Correct check for user-requested array watchpoints.
 167         (breakpoint_init_inferior): Clear val_valid.
 168         (watchpoint_value_print): New function.
 169         (print_it_typical): Use it.  Do not free or clear old_val.  Print
 170         watchpoints even if old_val == NULL.
 171         (watchpoint_check): Use fetch_watchpoint_value.  Check for values
 172         becoming readable or unreadable.
 173         (watch_command_1): Use fetch_watchpoint_value.  Set val_valid.
 174         (do_enable_watchpoint): Likewise.
 175         * breakpoint.h (struct breakpoint): Update comment for val.  Add
 176         val_valid.
 177         * NEWS: Mention watchpoints on inaccessible memory.
 178
 179 2007-02-29  Daniel Jacobowitz  <dan@codesourcery.com>
 180
 181         * Makefile.in (i386-nat.o): Update.
 182         * amd64-linux-nat.c (_initialize_amd64_linux_nat): Call
 183         i386_use_watchpoints.
 184         * i386-linux-nat.c (_initialize_i386_linux_nat): Call
 185         i386_use_watchpoints.
 186         * i386-nat.c (i386_stopped_data_address): Take two arguments.
 187         (i386_stopped_by_watchpoint): Update call.
 188         (i386_can_use_hw_breakpoint, i386_use_watchpoints): New.
 189         * config/i386/nm-i386.h: Conditionalize definitions on
 190         ! I386_WATCHPOINTS_IN_TARGET_VECTOR.
 191         (i386_use_watchpoints): Declare.
 192         (i386_stopped_data_address): Update.
 193         * config/i386/nm-linux.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
 194         * config/i386/nm-linux64.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
 195
 196 2008-02-29  Joel Brobecker  <brobecker@adacore.com>
 197
 198         GDB 6.8 branch created (branch timestamp: 2008-02-26 10:00 UTC)
 199         * version.in: Bump version to 6.8.50.20080229-cvs.
 200
 201 2008-02-28  Markus Deuling  <deuling@de.ibm.com>
 202
 203         * f-typeprint.c (f_print_type): Handle NULL pointer in VARSTRING
 204         properly.
 205
 206 2008-02-28  Tom Tromey  <tromey@redhat.com>
 207
 208         * infcmd.c (notice_args_read): Print result of get_inferior_args.
 209
 210 2008-02-28  Daniel Jacobowitz  <dan@codesourcery.com>
 211
 212         * infcmd.c (kill_if_already_running): Make static.  Use
 213         target_require_runnable.
 214         * target.c (target_require_runnable): New.
 215         * target.h (target_require_runnable): Declare.
 216
 217 2008-02-28  Daniel Jacobowitz  <dan@codesourcery.com>
 218
 219         * frame.c (reinit_frame_cache): Only annotate if frames were
 220         previously valid.
 221
 222 2008-02-28  Ulrich Weigand  <uweigand@de.ibm.com>
 223
 224         * regformats/reg-ppc.dat: Rename "ps" to "msr".
 225         * regformats/reg-ppc64.dat: Likewise.
 226
 227 2008-02-28  Ulrich Weigand  <uweigand@de.ibm.com>
 228
 229         * features/Makefile (%.dat): Emit xmltarget statement.
 230
 231         * regformats/regdat.sh: Support xmltarget and xmlarch statments.
 232         Generate code to set gdbserver_xmltarget in init_registers_${name}.
 233
 234         * regformats/arm-with-iwmmxt.dat: Regenerate.
 235         * regformats/mips64-linux.dat: Regenerate.
 236         * regformats/mips-linux.dat: Regenerate.
 237         * regformats/rs6000/powerpc-32.dat: Regenerate.
 238         * regformats/rs6000/powerpc-64.dat: Regenerate.
 239         * regformats/rs6000/powerpc-e500.dat: Regenerate.
 240
 241         * regformats/reg-arm.dat: Add xmlarch statement.
 242         * regformats/reg-i386.dat: Likewise.
 243         * regformats/reg-i386-linux.dat: Likewise.
 244         * regformats/reg-x86-64-linux.dat: Likewise.
 245         * regformats/reg-spu.dat: Likewise.
 246
 247 2008-02-27  Daniel Jacobowitz  <dan@codesourcery.com>
 248
 249         * remote.c (remote_wait, remote_async_wait): Stop if we receive
 250         an error.
 251
 252 2008-02-27  Daniel Jacobowitz  <dan@codesourcery.com>
 253
 254         * utils.c (debug_timestamp): New.
 255         (vfprintf_unfiltered): Print timestamps if requested.
 256         (show_debug_timestamp): New.
 257         (initialize_utils): Register "set debug timestamp".
 258         * NEWS: Mention "set debug timestamp".  Add GDB 6.8 section.
 259
 260 2008-02-27  Joel Brobecker  <brobecker@adacore.com>
 261
 262         * breakpoint.c (skip_prologue_sal): New function.
 263         (resolve_sal_pc): Adjust SAL past prologue if the SAL was
 264         computed from a line number.
 265
 266 2008-02-27  Joel Brobecker  <brobecker@adacore.com>
 267
 268         * features/rs6000/power-core.xml, features/rs6000/power64-core.xml
 269         features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
 270         Set PC register type to "code_ptr".
 271         * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
 272         features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
 273         features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
 274         features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
 275         features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
 276         features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
 277         features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c:
 278         Regenerate.
 279
 280 2008-02-27  Ulrich Weigand  <uweigand@de.ibm.com>
 281
 282         * regformats/regdat.sh: Rename init_registers function in
 283         generated file to init_registers_${name}.
 284
 285         * regformats/reg-crisv32.dat: Set "name" to crisv32.
 286         * regformats/reg-ppc64.dat: Set "name" to ppc64.
 287         * regformats/reg-s390x.dat: Set "name" to s390x.
 288
 289 2008-02-26  Greg Law  <glaw@undo-software.com>
 290
 291         * regcache.c (registers_changed): Call reinit_frame_cache.
 292
 293 2008-02-26  Daniel Jacobowitz  <dan@codesourcery.com>
 294
 295         * configure.tgt (sh-*-linux*): Match sh*.  Add glibc-tdep.o.
 296         * sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver
 297         and svr4_fetch_objfile_link_map.
 298         * Makefile.in (sh-linux-tdep.o): Update.
 299
 300 2008-02-26  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 301
 302         * amd64-tdep.c (amd64_classify): Add support for decimal float
 303         types.
 304         * i386-tdep.c (i386_return_value): Make 128-bit decimal float
 305         use the struct return convention.
 306
 307 2008-02-26  Nick Roberts  <nickrob@snap.net.nz>
 308
 309         * breakpoint.c (print_one_breakpoint_location): Revert Enb field
 310         to old format.  Discard breakpoint address if shared library is
 311         unloaded.
 312         (breakpoint_1): Adjust formatting of table header accordingly.
 313
 314 2008-02-25  Vladimir Prus  <vladimir@codesourcery.com>
 315
 316        * remote.c (remote_get_threadlist): If the response
 317        is empty, don't try to parse it.
 318
 319 2008-02-23  Vladimir Prus  <vladimir@codesourcery.com>
 320
 321         Unbreak 'target async'.
 322         * serial.c (serial_async): Set the
 323         handler function before enabling async
 324         mode.
 325
 326 2008-02-22  Daniel Jacobowitz  <dan@codesourcery.com>
 327
 328         * solib-svr4.c (enable_break): Convert r_brk to a code address.
 329
 330 2008-02-21  Pedro Alves  <pedro@codesourcery.com>
 331
 332         * remote.c (extended_remote_attach_1): Set attach_flag.
 333         (extended_remote_create_inferior_1): Clear attach_flag.
 334
 335 2008-02-20  Daniel Jacobowitz  <dan@codesourcery.com>
 336
 337         * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Set
 338         r_brk_offset.
 339         (mipsnbsd_lp64_fetch_link_map_offsets): Likewise.
 340         * solib-svr4.c (solib_svr4_r_brk): New.
 341         (open_symbol_file_object, svr4_current_sos): Always check the
 342         debug base.
 343         (svr4_fetch_objfile_link_map): Do not set debug_base.
 344         (enable_break): Use r_brk if it is set.
 345         (svr4_ilp32_fetch_link_map_offsets): Set r_brk_offset.
 346         (svr4_lp64_fetch_link_map_offsets): Likewise.
 347         * solib-svr4.h (struct link_map_offsets): Add r_brk_offset.
 348
 349 2008-02-20  Markus Deuling  <deuling@de.ibm.com>
 350             Mark Kettenis  <kettenis@gnu.org>
 351
 352         * alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by
 353         trad_frame_saved_reg.
 354         (trad-frame.h): New include.
 355
 356         (alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs
 357         instead of frame_obstack_zalloc.
 358         (alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register.
 359
 360         * Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h.
 361
 362 2008-02-20  Markus Deuling  <deuling@de.ibm.com>
 363
 364         * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess
 365         from disassemble_info instead of gdbarch_byte_order.
 366
 367         * mips-tdep.c (gdb_print_insn_mips): Likewise.
 368         * arm-tdep.c (gdb_print_insn_arm): Likewise.
 369
 370 2008-02-20  Markus Deuling  <deuling@de.ibm.com>
 371
 372         * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add
 373         gdbarch as parameter.
 374
 375         * gdbarch.{c,h}: Regenerate.
 376
 377         * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as
 378         parameter.
 379         * mem-break.c (default_memory_insert_breakpoint)
 380         (default_memory_remove_breakpoint): Likewise.
 381         * target.h (default_memory_remove_breakpoint)
 382         (default_memory_insert_breakpoint): Likewise.
 383
 384         * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as
 385         parameter. Replace current_gdbarch by gdbarch.
 386         * m32r-tdep.c (m32r_memory_insert_breakpoint)
 387         (m32r_memory_remove_breakpoint): Likewise.
 388
 389 2008-02-19  Daniel Jacobowitz  <dan@codesourcery.com>
 390
 391         * MAINTAINERS: Add Vladimir Prus as MI maintainer.
 392
 393 2008-02-19  Joel Brobecker  <brobecker@adacore.com>
 394
 395         * NEWS: Add entry describing Add support improvements.
 396
 397 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 398
 399         * m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by
 400         M68K_FP0_REGNUM.
 401
 402 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 403
 404         * sentinel-frame.c (sentinel_frame_prev_register): Do not call
 405         register_offset_hack anymore.
 406
 407         * regcache.{c,h} (register_offset_hack): Remove.
 408
 409 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 410
 411         * hppa-tdep.h (find_global_pointer): Add gdbarch as parameter.
 412
 413         * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace
 414         current_gdbarch by gdbarch.
 415         (hppa64_hpux_find_global_pointer): Likewise.
 416         * hppa-tdep.c (hppa_find_global_pointer): Likewise.
 417         (hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for
 418         find_global_pointer.
 419
 420         * hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as
 421         parameter.
 422         * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
 423
 424         * hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead
 425         of gdbarch_num_regs.
 426
 427         * hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and
 428         replace current_gdbarch by gdbarch.
 429         (hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr.
 430
 431 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 432
 433         * rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter
 434         and replace current_gdbarch by gdbarch.
 435
 436         (store_register): Update call for exec_one_dummy_insn.
 437         (fetch_register, store_register): Update call of regmap.
 438
 439         * ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as
 440         parameter and replace current_gdbarch by gdbarch.
 441
 442         (ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at
 443         the current architecture. Update call for getregs_supplies and
 444         getfpregs_supplies.
 445         (ppcnbsd_fetch_inferior_registers): Likewise.
 446
 447         * ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and
 448         replace current_gdbarch by gdbarch.
 449         (ppcobsd_fetch_registers, ppcobsd_store_registers): Use
 450         get_regcache_arch to get at the current architecture. Update call for
 451         getfpregs_supplies.
 452
 453 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 454
 455         * arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch
 456         variables.
 457
 458 2008-02-15  Markus Deuling  <deuling@de.ibm.com>
 459
 460         * mips-linux-tdep.c (mips_linux_init_abi): Remove internal error.
 461
 462 2008-02-14  Vladimir Prus  <vladimir@codesourcery.com>
 463
 464         * NEWS: Mention pending breakpints in MI.
 465
 466 2008-02-14  Markus Deuling  <deuling@de.ibm.com>
 467
 468         * Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o.
 469
 470 2008-02-13  Markus Deuling  <deuling@de.ibm.com>
 471
 472         Add script to build and test GDB using enable-targets=all.
 473
 474         * gdb_buildall.sh: New file.
 475
 476 2008-02-11  Maxim Grigoriev  <maxim2405@gmail.com>
 477
 478         * NEWS (New native configurations): Xtensa GNU/Linux.
 479         (New targets): Xtensa GNU/Linux.
 480         * Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
 481         xtensa-linux-tdep.o
 482         (ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
 483         (xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
 484         * configure.tgt (xtensa*-*-linux*): New entry.
 485         * xtensa-config.c (xtensa_tdep): New variable.
 486         (xtensa_config_byte_order, xtensa_config_tdep): Removed.
 487         (rmap): Change format based on new macro XTREG.
 488         (XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
 489         * xtensa-linux-nat.c: New.
 490         * xtensa-linux-tdep.c: New.
 491         * xtensa-xtregs.c: New.
 492         * xtensa-tdep.h (xtensa_elf_gregset_t): Update.
 493         (XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
 494         (XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
 495         (xtensa_register_t): New field coprocessor.
 496         (XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
 497         * xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
 498         (xtensa_pseudo_register_read, xtensa_pseudo_register_write):
 499         Update to handle privileged registers.
 500         (xtensa_supply_gregset) Remove exccause and excvaddr registers.
 501         (xtensa_push_dummy_call): Set windowstart register correctly.
 502         (call0_analyze_prologue): Initialize xtensa_default_isa.
 503         (xtensa_derive_tdep): New.
 504         (xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
 505         xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
 506         Call xtensa_derive_tdep().
 507         * config/xtensa/linux.mh: New.
 508         * regformats/reg-xtensa.dat: New.
 509
 510 2008-02-09  Aleksandar Ristovski  <aristovski@qnx.com>  (tiny change)
 511
 512         * corelow.c (core_open): Use IS_ABSOLUTE_PATH.
 513         (filenames.h): New include.
 514         * Makefile.in (corelow.o): Add dependency for filenames.h.
 515
 516 2008-02-08  Doug Evans  <dje@google.com>
 517
 518         * source.c (find_and_open_source): Always rewrite absolute filenames.
 519
 520 2008-02-07  Doug Evans  <dje@google.com>
 521
 522         * breakpoint.c: #include "hashtab.h".
 523         (ambiguous_names_p): New fn.
 524         (update_breakpoint_locations): When restoring bp enable status, don't
 525         compare function names if any functions have same name.
 526         * Makefile.in (breakpoint.o): Add hashtab.h dependency.
 527
 528 2008-02-07  Joel Brobecker  <brobecker@adacore.com>
 529
 530         * ada-lang.c (symbol_completion_add): Make SV parameter a VEC**
 531         instead of just a VEC*. Update use of SV.
 532         (ada_make_symbol_completion_list): Update symbol_completion_add calls.
 533
 534 2007-02-07  Joel Brobecker  <brobecker@adacore.com>
 535
 536         * NEWS: Put all new commands since gdb-6.7 together.
 537
 538 2007-02-07  Joel Brobecker  <brobecker@adacore.com>
 539
 540         * ada-lang.c: #include "vec.h".
 541         (struct string_vector, new_string_vector, string_vector_append):
 542         Delete.
 543         (char_ptr): New typedef.
 544         (DEF_VEC_P (char_ptr)): New VEC type.
 545         (symbol_completion_add): Update profile to take the new VEC type
 546         instead of the old string_vector structure. Update code accordingly.
 547         (ada_make_symbol_completion_list): Use the new VEC type instead of
 548         the old string_vector structure, and update the code accordingly.
 549         * Makefile.in (ada-lang.o): Add dependency on vec.h.
 550
 551 2008-02-06  Pierre Muller  <muller@ics.u-strasbg.fr>
 552
 553         * p-exp.y: Set current_type in missing places.
 554         (leftdiv_is_integer): New static variable.
 555         Typecast right operand of BINOP_DIV to long_double if both operands
 556         are integers.
 557
 558 2008-02-06  Maciej W. Rozycki  <macro@mips.com>
 559
 560         * remote-mips.c (set_breakpoint): Rename to...
 561         (mips_set_breakpoint): ... this.
 562         (clear_breakpoint): Rename to...
 563         (mips_clear_breakpoint): ... this.
 564         (common_breakpoint): Rename to...
 565         (mips_common_breakpoint): ... this.
 566         (check_lsi_error): Rename to...
 567         (mips_check_lsi_error): ... this.
 568
 569 2007-02-05  Joel Brobecker  <brobecker@adacore.com>
 570
 571         * language.h (struct language_defn): Add new field
 572         la_make_symbol_completion_list.
 573         * symtab.c (default_make_symbol_completion_list): Renames
 574         make_symbol_completion_list.
 575         (make_symbol_completion_list): New function.
 576         * symtab.h (default_make_symbol_completion_list): Add declaration.
 577         * langauge.c (unknown_language): Set la_make_symbol_completion_list.
 578         (auto_language, local_language): Likewise.
 579         * objc-lang.c (objc_language_defn): Likewise.
 580         * scm-lang.c (scm_language_defn): Likewise.
 581         * m2-lang.c (m2_language_defn): Likewise.
 582         * f-lang.c (f_language_defn): Likewise.
 583         * jv-lang.c (java_language_defn): Likewise.
 584         * p-lang.c (pascal_language_defn): Likewise.
 585         * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn)
 586         (minimal_language_defn): Likewise.
 587         * ada-lang.c (struct string_vector): New structure.
 588         (new_string_vector, string_vector_append, ada_unqualified_name)
 589         (add_angle_brackets, symbol_completion_match, symbol_completion_add)
 590         (ada_make_symbol_completion_list): New functions.
 591         (ada_language_defn): Set la_make_symbol_completion_list.
 592         * ada-lang.h (ada_make_symbol_completion_list): Remove declaration,
 593         this function is static.
 594
 595 2008-02-05  Kevin Buettner  <kevinb@redhat.com>
 596
 597         * mn10300-tdep.c (mn10300_push_dummy_call): Adjust stack pointer
 598         to account for call site optimizations.
 599
 600 2008-02-05  Andrzej Zaborowski  <balrogg@gmail.com>
 601
 602         * tracepoint.c (read_actions): Handle end-of-text indicator
 603         in action list properly.  (Committed by Jim Blandy)
 604
 605 2008-02-05  Jim Blandy  <jimb@red-bean.com>
 606
 607         * ax-gdb.c (gen_expr): Yield ordinary error if asked to trace a
 608         pseudoregister, not an internal error.
 609         Reported by: Andrzej Zaborowski
 610
 611 2008-02-04  Vladimir Prus  <vladimir@codesourcery.com>
 612
 613         * varobj.c (c_value_of_variable): Use xstrdup.
 614
 615 2008-02-04  Vladimir Prus  <vladimir@codesourcery.com>
 616
 617         Update stored rendition of varobj value when format changes.
 618         * varobj.c (varobj_set_display_format): Recomputed
 619         print_value.
 620         (c_value_of_variable): Return print_value.
 621
 622 2008-02-03  Doug Evans  <dje@google.com>
 623
 624         * eval.c (evaluate_subexp_standard): Fix type of result of mixed
 625         integer/float division operations when EVAL_AVOID_SIDE_EFFECTS.
 626         * valops.c (value_one): New function.
 627         * value.h (value_one): Declare.
 628
 629         Fix argument promotion for binary arithmetic ops for C.
 630         * valarith.c (unop_result_type): New fn.
 631         (binop_result_type): New fn.
 632         (value_binop): Move result type computation to binop_result_type.
 633         (value_pos, value_neg, value_complement): Move result type
 634         computation to unop_result_type.
 635
 636         PR 2384
 637         * gdbtypes.c (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
 638         Return basetype, fieldno if found.  All callers updated.
 639         Don't cache TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE if from different
 640         objfile.
 641         * gdbtypes.h (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
 642         * symfile.h (fill_in_vptr_fieldno): Delete.
 643
 644 2008-02-02  Doug Evans  <dje@google.com>
 645
 646         * valarith.c (value_binop): Handle unsigned BINOP_REM division by zero.
 647
 648         * typeprint.c (*): Whitespace cleanup.
 649
 650 2008-02-02  Mark Kettenis  <kettenis@gnu.org>
 651             Luis Machado  <luisgpm@br.ibm.com>
 652             Thiago Jung Bauermann  <bauerman@br.ibm.com>
 653
 654         * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that
 655         don't fit into registerson the stack the way GCC does.
 656
 657 2008-02-01  Joel Brobecker  <brobecker@adacore.com>
 658
 659         * symtab.c (symbol_set_names): Do not add an entry in the demangling
 660         hash table for Ada symbols. Just store the linkage name as is,
 661         and leave the demangled_name as NULL.
 662
 663 2007-02-01  Joel Brobecker  <brobecker@adacore.com>
 664
 665         * dwarf2read.c (add_partial_symbol): Always store all Ada subprograms
 666         in the global scope.
 667         (new_symbol): Likewise.
 668
 669 2008-02-01  Vladimir Prus  <vladimir@codesourcery.com>
 670
 671         * breakpoint.c (break_command_1): Return void.
 672         (break_command_really): Return void.  Rethrow
 673         exceptions instead of returning.
 674         (gdb_breakpoint): Remove the error_message parameter.
 675         Return void.  Rename to set_breakpoint.
 676         * gdb.h (gdb_breakpoint): Rename and move to...
 677         * breakpoint.h (set_breakpoint): ...here.
 678         * mi/mi-cmb-break.c (mi_cmd_break_insert): Restore
 679         event hooks even if exception is thrown.  Adjust to
 680         gdb_breakpoint interface changes.
 681
 682
 683 2008-02-01  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 684
 685         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Write 32-bit
 686         float in both first and second word in the doubleword, to support
 687         old and new ABIs.
 688
 689 2008-02-01  Vladimir Prus  <vladimir@codesourcery.com>
 690
 691         Properly rethrow exception.  This fixes errors
 692         about non-existent functions for -break-insert.
 693         * breakpoint.c (break_command_really): Use throw_exception
 694         for rethrowing.  If rethrowing, don't print the exception.
 695
 696 2008-01-31  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 697
 698         * NEWS: Mention Decimal Floating Point support.
 699
 700 2008-01-31  Joel Brobecker  <brobecker@adacore.com>
 701
 702         * std-regs.c (value_of_builtin_frame_pc_reg): Change the returned
 703         value type to builtin_type_void_func_ptr.
 704
 705 2008-01-31  Andreas Krebbel  <krebbel1@de.ibm.com>
 706
 707         * s390-tdep.c (is_float_singleton, is_float_like,
 708         alignment_of, s390_return_value): Make checks for
 709         TYPE_CODE_FLT to match TYPE_CODE_DECFLOAT as well.
 710
 711 2008-01-31  Luis Machado  <luisgpm@br.ibm.com>
 712             Thiago Jung Bauermann  <bauerman@br.ibm.com>
 713
 714         * infcmd.c (default_print_registers_info): Also print hex
 715         raw contents for TYPE_CODE_DECFLOAT registers.
 716         * ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member.
 717         * rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro.
 718         (rs6000_register_name): Add support for DFP pseudo-registers.
 719         (rs6000_pseudo_register_type): Likewise.
 720         rs6000_pseudo_register_reggroup_p): Likewise.
 721         (ppc_pseudo_register_read): New function.
 722         (ppc_pseudo_register_write): Likewise.
 723         (rs6000_pseudo_register_read): Likewise.
 724         (rs6000_pseudo_register_write): Likewise.
 725         (e500_pseudo_register_read): Move checks to
 726         rs6000_pseudo_register_read.
 727         (e500_pseudo_register_write): Move checks to
 728         rs6000_pseudo_register_write.
 729         (rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum.  Install
 730         rs6000_pseudo_register_read and rs6000_pseudo_register_write
 731         in gdbarch if SPE or DFP is available.  Adjust gdbarch's
 732         num_pseudo_regs to account for DFP pseudo regs.
 733
 734 2008-01-31  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 735
 736         * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_ev31_regnum member.
 737         * rs6000-tdep.c (IS_SPE_PSEUDOREG): New macro.
 738         (spe_register_p, rs6000_register_name, rs6000_pseudo_register_type,
 739         rs6000_pseudo_register_reggroup_p, e500_move_ev_register,
 740         e500_pseudo_register_read, e500_pseudo_register_write): Use
 741         IS_SPE_PSEUDOREG macro.
 742         (rs6000_frame_cache): Remove use of tdep->ppc_ev31_regnum.
 743         (rs6000_gdbarch_init): Remove unnecessary num_sprs local variable.
 744         Remove initialization of tdep->ppc_ev31_regnum.
 745
 746 2008-01-08  Paul Hilfinger  <hilfinger@adacore.com>
 747
 748         * printcmd.c (print_formatted): Handle references as for unformatted
 749         prints.
 750
 751 2008-01-30  Joel Brobecker  <brobecker@adacore.com>
 752
 753         * eval.c (evaluate_subexp_standard): Add handling of user
 754         registers when in EVAL_AVOID_SIDE_EFFECTS mode.
 755
 756 2008-01-30  Pierre Muller  <muller@ics.u-strasbg.fr>
 757
 758         * eval.c (evaluate_subexp_standard): Support
 759         BINOP_INTDIV opcode.
 760
 761 2008-01-30  Paul N. Hilfinger  <hilfinger@adacore.com>
 762
 763         * valarith.c (value_binop): Add floating-point BINOP_MIN and
 764         BINOP_MAX cases.
 765         For BINOP_EXP, use length and signedness of left operand only for
 766         result, as for shifts.
 767         For integral operands to BINOP_EXP, use new integer_pow and
 768         uinteger_pow functions so as to get full range of results.
 769         (integer_pow): New function.
 770         (uinteger_pow): New function.
 771
 772 2008-01-30  Vladimir Prus  <vladimir@codesourcery.com>
 773
 774         Use vector for varobj_list_children interface.
 775         * gdb/varobj.c (varobj_list_children): Return vector
 776         of varobjs.
 777         * gdb/varobj.h (varobj_list_children): Adjust
 778         prototype.
 779         (varobj_p): Declare.  Declare vector thereof.
 780         * mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust
 781         for varobj_list_children change.
 782         * Makefile.in (varobj_h): Update dependencies.
 783
 784 2008-01-30  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 785
 786         * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Add support for
 787         TYPE_CODE_DECFLOAT arguments.
 788         (ppc64_sysv_abi_push_dummy_call) Likewise.
 789         (get_decimal_float_return_value): New function.
 790         (do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return
 791         values by calling get_decimal_float_return_value.
 792         (ppc64_sysv_abi_return_value): Likewise.
 793
 794 2008-01-30  Nick Roberts  <nickrob@snap.net.nz>
 795
 796         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file):  Add field
 797         for preprocessor macro information.  Formatting changes.
 798
 799 2008-01-29  Daniel Jacobowitz  <dan@codesourcery.com>
 800
 801         * remote.c (struct remote_state): Add cached_wait_status.
 802         (remote_exec_file): New variable.
 803         (PACKET_vAttach, PACKET_vRun): New constants.
 804         (extended_remote_restart): Do not query for status.
 805         (struct start_remote_args): New.
 806         (remote_start_remote): Take it as a second argument.  Check
 807         whether the target is running.  Issue an error for non-running
 808         non-extended targets.  Cache the wait status.  Set inferior_ptid
 809         here.
 810         (remote_open_1): Prompt to disconnect non-running targets.  Make
 811         sure the target is marked running.  Do not set inferior_ptid here.
 812         Update call to remote_start_remote.  Do not call remote_check_symbols
 813         if the target is not running.
 814         (remote_detach_1): Rename from remote_detach.  Take an EXTENDED
 815         argument.  Handle a non-running target.
 816         (remote_detach): Use it.
 817         (extended_remote_detach): New.
 818         (remote_disconnect): Fix typo.  Use remoute_mourn_1.
 819         (extended_remote_attach_1, extended_remote_attach)
 820         (extended_async_remote_attach): New.
 821         (remote_vcont_resume): Remove unused variable.
 822         (remote_wait, remote_async_wait): Use any cached wait status.
 823         (putpkt_binary, getpkt): Clear any cached wait status.
 824         (extended_remoute_mourn_1): New.
 825         (extended_remote_mourn): Use it.
 826         (extended_async_remote_mourn, extended_remote_run): New.
 827         (extended_remote_create_inferior_1): New.
 828         (extended_remote_create_inferior): Use it.
 829         (extended_remote_async_create_inferior): Likewise.
 830         (remote_xfer_partial): Skip for non-executing targets.
 831         (init_extended_remote_ops): Set to_detach and to_attach.
 832         (init_extended_async_remote_ops): Likewise.  Use
 833         extended_async_remote_mourn.
 834         (_initialize_remote): Register vAttach, vRun, and
 835         set remote exec-file.
 836         * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
 837
 838 2008-01-29  Daniel Jacobowitz  <dan@codesourcery.com>
 839
 840         * Makefile.in (symfile.o): Update.
 841         * NEWS: Mention exec tracing support.
 842         * inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
 843         exec events.
 844         * infcmd.c (kill_if_already_running, detach_command)
 845         (disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
 846         * infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
 847         (follow_exec): Do not check may_follow_exec.  Do not mourn and push
 848         targets.  Apply the sysroot path to the loaded executable.  Use
 849         no_shared_libraries.
 850         * linux-nat.c (linux_child_follow_fork): Print fork following
 851         messages if verbose.
 852         (kill_wait_callback): Kill again before waiting a second time.
 853         * symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
 854         no_shared_libraries.
 855
 856 2008-01-29  Joel Brobecker  <brobecker@adacore.com>
 857
 858         * amd64-tdep.c (amd64_classify): Add handling of TYPE_CODE_CHAR.
 859
 860 2008-01-29  Joel Brobecker  <brobecker@adacore.com>
 861
 862         * nto-tdep.h: Remove #include "defs.h".
 863         * nto-tdep.c: Add #include "defs.h".
 864         * Makefile.in (nto_tdep_h): Update dependencies.
 865         (nto-tdep.o): Likewise.
 866
 867 2008-01-29  Joel Brobecker  <brobecker@adacore.com>
 868
 869         * infrun.c (wait_for_inferior): Add treat_exec_as_sigtrap parameter
 870         and use it.
 871         (proceed, start_remote): Update call to wait_for_inferior.
 872         * inferior.h (wait_for_inferior): Update declaration.
 873         * fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c,
 874         solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior.
 875         * inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as
 876         TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED.
 877
 878 2008-01-29  Aleksandar Ristovski  <aristovski@qnx.com>
 879
 880         * varobj (adjust_value_for_child_access): Added checking for
 881         returned value from gdb_value_ind.
 882         (c_describe_child): Likewise.
 883         (cplus_describe_child): Fixed a typo.
 884
 885 2008-01-29  Jim Blandy  <jimb@red-bean.com>
 886
 887         * MAINTAINERS: Update my info.
 888
 889 2008-01-29  Vladimir Prus  <vladimir@codesourcery.com>
 890
 891         Use multiple locations for hardware watchpoints.
 892         This eliminates the need to traverse value chain, doing
 893         various checks, in three different places.
 894
 895         * breakpoint.h (struct bp_location): New fields
 896         lengths and watchpoint_type.
 897         (struct breakpoint): Remove the val_chain field.
 898         * breakpoint.c (is_hardware_watchpoint): New.
 899         (free_valchain): Remove.
 900         (update_watchpoint): New.
 901         (insert_bp_location): For hardware watchpoint, just
 902         directly insert it.
 903         (insert_breakpoints): Call update_watchpoint_locations
 904         on all watchpoints.  If we have failed to insert
 905         any location of a hardware watchpoint, remove all inserted
 906         locations.
 907         (remove_breakpoint): For hardware watchpoints, directly
 908         remove location.
 909         (watchpoints_triggered): Iterate over locations.
 910         (bpstat_stop_status): Use only first location of
 911         a resource watchpoint.
 912         (delete_breakpoint): Don't call free_valchain.
 913         (print_one_breakpoint): Don't print all
 914         locations for watchpoints.
 915         (breakpoint_re_set_one): Use update_watchpoint for
 916         watchpoints.
 917
 918 2008-01-29  Vladimir Prus  <vladimir@codesourcery.com>
 919
 920         Don't reset watchpoint block on solib load.
 921
 922         * breakpoint.c (insert_bp_location): For watchpoints,
 923         recompute condition.
 924         (breakpoint_re_set_one): Instead of recomputing value
 925         and condition for watchpoints, just reset value and
 926         let insert_breakpoints/insert_bp_location recompute it.
 927         Don't do anything about disabled watchpoint.
 928
 929 2008-01-29  Pierre Muller  <muller@ics.u-strasbg.fr>
 930
 931         * valarith.c (value_binop): Handle unsigned integer
 932         division by zero.
 933
 934 2008-01-28  Kevin Buettner  <kevinb@redhat.com>
 935
 936         * mn10300-tdep.c (mn10300_analyze_prologue): Check for an
 937         instruction pattern that appears frequently in position
 938         independent code.  Fix bug in code which looks for "fmov" and
 939         backtracks if no "fmov" is found.
 940
 941 2008-01-28  Doug Evans  <dje@google.com>
 942
 943         * dbxread.c (read_dbx_symtab): Fix indentation.
 944         Reformat comments to 80 columns.
 945         Move local var def closer to only use.
 946
 947 2008-01-28  Daniel Jacobowitz  <dan@codesourcery.com>
 948
 949         * fork-child.c (SHELL_FILE): Remove #ifndef.
 950         (fork_inferior): Remove SHELL_COMMAND_CONCAT.
 951
 952 2008-01-25  Pierre Muller  <muller@ics.u-strasbg.fr>
 953
 954         * i386-tdep.c (i386_skip_noop): New function.
 955         (i386_analyze_prologue): Call i386_skip_noop function.
 956
 957 2008-01-24  Michael Snyder  <msnyder@specifix.com>
 958
 959         * procfs.c (procfs_xfer_partial): Comment, cut/paste error.
 960         * win32-nat.c (win32_xfer_partial): Ditto.
 961         * target.c (default_xfer_partial): Minor whitespace adjustment.
 962
 963 2008-01-24  Pedro Alves  <pedro@codesourcery.com>
 964
 965         * arm-tdep.c (arm_addr_bits_remove): In non 26-bit mode, don't
 966         strip bit 1 even if pc doesn't point to thumb code.
 967
 968 2008-01-23  Daniel Jacobowitz  <dan@codesourcery.com>
 969
 970         * remote.c (remote_wait): Handle SIGINT between packets.
 971         (remote_async_wait): Likewise.
 972
 973 2008-01-23  Vladimir Prus  <vladimir@codesourcery.com>
 974             Chris Demetriou  <cgd@google.com>
 975
 976         * thread.c (add_thread_silent): Renamed
 977         from add_thread.
 978         (print_thread_events): New variable definition.
 979         (show_print_thread_events): New function.
 980         (_initialize_thread): Add "set print thread-events" and
 981         "show print thread-events" commands.
 982         (add_thread): Announce new thread.
 983         * gdbthread.h (add_thread_silent): Declare.
 984         (print_thread_events): New variable declaration.
 985         * inf-ttrace.c (inf_ttrace_wait): Don't
 986         inform about new thread, as add_thread is always
 987         called too, and will take care of that.
 988         * infrun.c (handle_inferior_event): Likewise.
 989         * procfs.c (procfs_wait): Likewise.
 990         * remote.c (remote_currthread): Likewise.
 991         * sol-thread.c (sol_thread_wait): Likewise.
 992         * win32-nat.c (get_win32_debug_event): Likewise.
 993         * linux-thread-db.c (attach_thread): Likewise.
 994         Remove the verbose parameter.
 995         (check_event): Make detach_thread be verbose
 996         only if print_thread_events is set.
 997         * linux-nat.c (lin_lwp_attach_lwp): Don't inform
 998         about new thread.  This is called only from
 999         linux-thread-db.c:attach_thread, which will take care.
1000         Remove the verbose parameter.
1001         * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
1002
1003 2008-01-23  Nick Roberts  <nickrob@snap.net.nz>
1004
1005         * mi/mi-cmd-var.c (mi_cmd_var_set_format): Add value field to output.
1006
1007 2008-01-22  Vladimir Prus  <vladimir@codesourcery.com>
1008
1009         * breakpoint.c (break_command_really): New parameter
1010         ignore_count.
1011         (break_command_1): Pass 0 as
1012         ignore_count to break_command_really.
1013         (gdb_breakpoint): Pass ignore_count to
1014         break_command_really.
1015
1016 2008-01-21  Kevin Buettner  <kevinb@redhat.com>
1017
1018         * mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find
1019         sigcontext struct via pointer.
1020         (struct sigframe comment): Update to show new field `psc'.
1021
1022 2008-01-21  Vladimir Prus  <vladimir@codesourcery.com>
1023
1024         * infrun.c (handle_inferior_event): If
1025         we failed to remove breakpoints, error,
1026         don't try to increment PC by hand.
1027
1028 2008-01-18  Nick Hudson  <nick.hudson@dsl.pipex.com>
1029
1030         Add NetBSD/hppa target and host support.
1031
1032         * hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
1033         (hppabsd_gregset): Move to ...
1034         (hppabsd_regset_from_core_section): Rename
1035         hppaobsd_regset_from_core_section and move to ...
1036         (hppabsd_find_global_pointer): Update comment.
1037         (hppabsd_init_abi): Make global. Do not register
1038         hppabsd_regset_from_core_section.
1039         (hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
1040         move to ...
1041         (_initialize_hppabsd_tdep): Move to ...
1042         * hppaobsd-tdep.c: ... here. New file.
1043         * hppnbsd-tdep.c: New file.
1044         * hppnbsd-nat.c: New file.
1045         * Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
1046         (ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
1047         (hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
1048         (hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
1049         * configure.host (hppa*-*-netbsd*): New entry.
1050         * configure.tgt (hppa*-*-netbsd*): New entry.
1051         (hppa*-*-openbsd*): Update.
1052         * NEWS (New native configuration): Mention NetBSD/hppa.
1053         (New targets): Mention NetBSD/hppa.
1054
1055 2008-01-18  Markus Deuling  <deuling@de.ibm.com>
1056
1057         * gdbarch.sh (function_list): Add new property bits_big_endian to
1058         gdbarch structure.
1059         * gdbarch.{c,h}: Regenerate.
1060
1061         * value.c (struct value): Replace BITS_BIG_ENDIAN by
1062         gdbarch_bits_big_endian (comment).
1063         (unpack_field_as_long, modify_field): Likewise.
1064         * value.h: Likewise (comment).
1065         * valops.c (value_slice): Likewise.
1066         * valarith.c (value_subscript, value_bit_index): Likewise.
1067         * gdbtypes.h (field): Likewise (comment).
1068         * eval.c (evaluate_subexp_standard): Likewise.
1069         * dwarf2read.c (dwarf2_add_field): Likewise.
1070         * ada-lang.c (decode_packed_array, ada_value_primitive_packed_val)
1071         (move_bits, ada_value_assign, value_assign_to_component): Likewise.
1072
1073         * defs.h (BITS_BIG_ENDIAN): Remove.
1074
1075 2008-01-18  Markus Deuling  <deuling@de.ibm.com>
1076
1077         * jv-exp.y (yylex): Replace DEPRECATED_STREQN with the appropriate
1078         function calls.
1079         * m2-exp.y (yylex): Likewise.
1080         * objc-exp.y (yylex): Likewise.
1081
1082         * defs.h (DEPRECATED_STREQN): Remove.
1083
1084 2008-01-17  H.J. Lu  <hjl.tools@gmail.com>
1085
1086         * MAINTAINERS: Update my email address.
1087
1088 2008-01-17  Jim Blandy  <jimb@codesourcery.com>
1089
1090         * README: Mention gdbserver/README.
1091
1092 2008-01-17  Pierre Muller  <muller@ics.u-strasbg.fr>
1093
1094         * valarith.c (value_binop): Handle BINOP_INTDIV
1095         for unsigned and signed integers.
1096
1097 2008-01-17  Ulrich Weigand  <uweigand@de.ibm.com>
1098
1099         * s390-tdep.c (s390_gdbarch_init): Set default long double
1100         type to 128-bit IEEE quad.
1101
1102 2008-01-17  Joel Brobecker  <brobecker@adacore.com>
1103
1104         * hpux-thread.c (hpux_thread_resume): Delete commented-out code.
1105
1106 2008-01-16  Mark Kettenis  <kettenis@gnu.org>
1107
1108         * auxv.c (fprint_target_auxv): Add support for AT_SUN_AUXFLAGS.
1109
1110         * dfp.c, dfp.h: Rename decimal_to_double to decimal_to_doublest.
1111         * value.c: All callers changed.
1112
1113 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
1114
1115         * rs6000-nat.c (add_vmap, vmap_ldinfo, vmap_exec): Replace
1116         DEPRECATED_STREQ by its expression.
1117         * coffread.c (coff_locate_sections, coff_symtab_read): Likewise.
1118         * xcoffread.c (read_xcoff_symtab, read_symbol_lineno, find_linenos)
1119         (scan_xcoff_symtab): Likewise.
1120         * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Likewise.
1121         * f-lang.c (find_common_for_function): Likewise.
1122         * objc-exp.y (parse_number): Likewise.
1123
1124         * defs.h (DEPRECATED_STREQ): Remove.
1125
1126 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
1127
1128         * mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter.
1129         * mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use
1130         get_frame_arch to get at the current_architecture. Update AM33_MODE
1131         call.
1132         (mn10300_analyze_prologue): Add gdbarch as parameter. Update caller.
1133         (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
1134         architecture.
1135         (set_reg_offsets, mn10300_analyze_prologue): Fix indentation.
1136
1137 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
1138
1139         * amd64-nat.h (amd64_native_gregset_supplies_p): Add gdbarch as
1140         parameter.
1141         * amd64-nat.c (amd64_native_gregset_supplies_p): Likewise.
1142
1143         (amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace
1144         current_gdbarch by gdbarch. Update caller.
1145
1146         * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers)
1147         (amd64_linux_store_inferior_registers): Use get_regcache_arch to get at
1148         the current architecture. Update calls of
1149         amd64_native_gregset_supplies_p.
1150         * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers)
1151         (amd64bsd_store_inferior_registers): Likewise.
1152
1153 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
1154
1155         * ppc-linux-nat.c (ppc_register_u_addr): Add gdbarch as parameter.
1156         Replace current_gdbarch by gdbarch. Update caller.
1157
1158 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
1159
1160         * dbxread.c (repeated_header_complaint, dbx_symfile_init)
1161         (read_dbx_dynamic_symtab, function_outside_compilation_unit_complaint)
1162         (read_dbx_symtab, end_psymtab, dbx_psymtab_to_symtab_1)
1163         (dbx_psymtab_to_symtab, read_ofile_symtab, process_one_symbol)
1164         (stabsect_build_psymtabs): Fix indentation.
1165
1166 2008-01-15  Michael Snyder  <msnyder@specifix.com>
1167
1168         * corelow.c (core_xfer_partial): Comment, cut/paste error.
1169
1170 2008-01-14  Pierre Muller  <muller@ics.u-strasbg.fr>
1171
1172         * win32-nat.c (win32_create_inferior): Restore code calling
1173         CloseHandle on ProcessInformation structure.
1174
1175 2008-01-13  Nick Hudson  <nick.hudson@dsl.pipex.com>
1176
1177         * configure.ac: Check for void * as 3 argument of ptrace.
1178         * configure: regenerate.
1179
1180 2008-01-11  Markus Deuling  <deuling@de.ibm.com>
1181
1182         * alpha-tdep.c (alpha_heuristic_proc_start)
1183         (alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
1184         current_gdbarch by gdbarch.
1185
1186         (alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
1187         current architecture by frame_info. Update alpha_heuristic_proc_start
1188         call.
1189
1190         (alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
1191         get_frame_arch to get at the current architecture by frame_info. Update
1192         alpha_sigtramp_register_address call.
1193
1194         * arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
1195         current_gdbarch by gdbarch. Update caller.
1196         (convert_to_extended, convert_from_extended): Add endianess parameter
1197         for comparison. Update caller.
1198         (arm_extract_return_value, arm_store_return_value): Use
1199         get_regcache_arch to get at the current architecture.
1200
1201         * cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
1202         current_gdbarch by gdbarch. Update caller.
1203         (cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
1204         gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.
1205
1206         * h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
1207         gdbarch as parameter. Update caller.
1208         (h8300_init_frame_cache): Add gdbarch as parameter. Replace
1209         current_gdbarch by gdbarch. Update caller.
1210
1211         * hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and
1212         update caller. Replace current_gdbarch by gdbarch.
1213
1214         * m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
1215         the current architecture. Replace current_gdbarch by gdbarch.
1216         * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
1217         (STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
1218         expression. Add gdbarch as parameter and replace current_gdbarch with
1219         it. Update caller.
1220         (M6811_TDEP): Remove.
1221         (m68hc11_frame_prev_register): Use get_frame_arch to get at the current
1222         architecture.
1223         (m68hc11_scan_prologue): Add gdbarch as parameter. Replace
1224         current_gdbarch by gdbarch. Update caller.
1225
1226         * m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
1227         update caller.
1228         (m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
1229         by gdbarch.
1230
1231         * rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
1232         caller. Relace current_gdbarch by gdbarch.
1233         (altivec_register_p, spe_register_p): Likewise.
1234         * ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
1235         parameter.
1236         * ppc-linux-nat.c (fetch_register, store_register): Update caller of
1237         altivec_register_p and spe_register_p.
1238
1239         * score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update
1240         caller. Replace current_gdbarch by gdbarch.
1241         (score_analyze_prologue): use get_frame_arch to get at the current
1242         architecture.
1243
1244         * sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
1245         * sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
1246         current_gdbarch by gdbarch. Update caller.
1247         (sparc_frame_cache): Use get_frame_arch to get at the current
1248         architecture.
1249         * sparce64-tdep.c (sparc64_skip_prologue): Update call of
1250         sparc_analyze_prologue.
1251
1252         * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
1253         parameter.
1254
1255 2008-01-11  Markus Deuling  <deuling@de.ibm.com>
1256
1257         * exec.c: #include "arch-utils.h"
1258          (print_section_info): Use gdbarch_from_bfd to get at the
1259         current architecture. Replace current_gdbarch. Fix indention. Replace
1260         deprecated_print_address_numeric by paddress.
1261         * Makefile.in (exec.o) Add dependency to arch-utils.h.
1262
1263         * valprint.c (val_print_string): Replace
1264         deprecated_print_address_numeric.
1265         * tracepoint.c (trace_mention, scope_info): Likewise.
1266         * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
1267         (print_symbol, print_partial_symbols, maintenance_info_psymtabs)
1268         (maintenance_check_symtabs): Likewise.
1269         * symfile.c (list_overlays_command): Likewise.
1270         * stack.c (frame_info, print_block_frame_labels): Likewise.
1271         * printcmd.c (print_address, print_address_demangle)
1272         (address_info): Likewise.
1273         * corefile.c (memory_error): Likewise.
1274         * infcmd.c (jump_command): Likewise.
1275         * breakpoint.c (insert_bp_location, describe_other_breakpoints)
1276         (mention, delete_breakpoint): Likewise.
1277         * c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
1278         * dwarf2read.c (dump_die): Likewise.
1279         * ada-valprint.c (ada_val_print_1): Likewise.
1280         * f-valprint.c (f_val_print): Likewise.
1281         * linux-fork.c (info_forks_command): Likewise.
1282         * m32r-com.c (m32r_load_section, m32r_load)
1283         (m32r_upload_command): Likewise.
1284
1285         * ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.
1286
1287 2008-01-11  Markus Deuling  <deuling@de.ibm.com>
1288
1289         * gdbarch.sh (skip_prologue): Add gdbarch
1290         as parameter.
1291         * gdbarch.{c,h}: Regenerate.
1292
1293         * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter.
1294         * amd64-tdep.c (amd64_skip_prologue): Likewise.
1295         * avr-tdep.c (avr_skip_prologue): Likewise.
1296         * cris-tdep.c (cris_skip_prologue): Likewise.
1297         * frv-tdep.c (frv_skip_prologue): Likewise.
1298         * h8300-tdep.c (h8300_skip_prologue): Likewise.
1299         * hppa-tdep.c (hppa_skip_prologue): Likewise.
1300         * i386-tdep.c (i386_skip_prologue): Likewise.
1301         * ia64-tdep.c (ia64_skip_prologue): Likewise.
1302         * iq2000-tdep.c (iq2000_skip_prologue): Likewise.
1303         * m32r-tdep.c (m32r_skip_prologue): Likewise.
1304         * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise.
1305         * m68k-tdep.c (m68k_skip_prologue): Likewise.
1306         * m88k-tdep.c (m88k_skip_prologue): Likewise.
1307         * mep-tdep.c (mep_skip_prologue): Likewise.
1308         * mips-tdep.c (mips_skip_prologue): Likewise.
1309         * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
1310         * mt-tdep.c (mt_skip_prologue): Likewise.
1311         * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
1312         * score-tdep.c (score_skip_prologue): Likewise.
1313         * sh64-tdep.c (sh64_skip_prologue): Likewise.
1314         * sh-tdep.c (sh_skip_prologue): Likewise.
1315         * sparc64-tdep.c (sparc64_skip_prologue): Likewise.
1316         * sparc-tdep.c (sparc32_skip_prologue): Likewise.
1317         * spu-tdep.c (spu_skip_prologue): Likewise.
1318         * v850-tdep.c (v850_skip_prologue): Likewise.
1319         * vax-tdep.c (vax_skip_prologue): Likewise.
1320         * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
1321         * xtensa-tdep.c (xtensa_skip_prologue): Likewise.
1322
1323         * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace
1324         current_gdbarch by gdbarch.
1325         * m32c-tdep.c (m32c_skip_prologue): Likewise.
1326         * s390-tdep.c (s390_skip_prologue): Likewise.
1327
1328 2008-01-10  Doug Evans  <dje@google.com>
1329
1330         * defs.h (struct continuation_arg): Fix typo in comment.
1331         * target.c (target_translate_tls_address): Fix comment spelling error.
1332
1333 2008-01-09  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1334
1335         * doublest.h (DOUBLEST_PRINT_FORMAT): Remove % from string.
1336         (DOUBLEST_SCAN_FORMAT): Likewise.
1337         * dfp.c (decimal_from_floating): Use DOUBLEST_PRINT_FORMAT.
1338         * ada-lex.l (processReal): Prepend "%" to use of DOUBLEST_SCAN_FORMAT.
1339         * c-exp.y (parse_number): Likewise.
1340         * jv-exp.y (parse_number): Likewise.
1341         * objc-exp.y (parse_number): Likewise.
1342         * p-exp.y (parse_number): Likewise.
1343
1344 2008-01-09  Joel Brobecker  <brobecker@adacore.com>
1345
1346         * gdbtypes.c (create_array_type): Add handling of null Ada arrays.
1347         (check_typedef): Likewise.
1348
1349 2008-01-09  Luis Machado  <luisgpm@br.ibm.com>
1350
1351         * printcmd.c (printf_command): Add seen_big_h, seen_big_d and
1352         seen_double_big_d, treat the new H, D, and DD modifiers as length
1353         modifiers.
1354
1355 2008-01-08  Joel Brobecker  <brobecker@adacore.com>
1356
1357         * dwarf2read.c (read_enumeration_type): Add comment.
1358
1359 2008-01-08  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1360
1361         * config.in: Regenerate.
1362
1363 2008-01-08  Joel Brobecker  <brobecker@adacore.com>
1364
1365         * ada-lang.c (ada_convert_actual): Renames convert_actual.
1366         Make non-static.
1367         (ada_convert_actuals): Delete.
1368         * ada-lang.h (ada_convert_actual): Add declaration.
1369         (ada_convert_actuals): Remove declaration.
1370         * infcall.c: #include "ada-lang.h".
1371         (value_arg_coerce): Add new parameter sp.  Update function
1372         documetnation.  Add handling of Ada function call parameters.
1373         * Makefile.in (infcall.o): Update dependencies.
1374
1375 2008-01-08  Paul Hilfinger  <hilfinger@adacore.com>
1376
1377         * ada-lang.c (ensure_lval): Fix value lval kind.
1378         (convert_actual): Add handling for arguments passed by reference.
1379
1380 2008-01-08  Doug Evans  <dje@google.com>
1381
1382         * dbxread.c (read_dbx_symtab): Fix indentation.
1383
1384 2008-01-07  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1385
1386         * Makefile.in (dfp.o): Depend on expression.h, gdbtypes.h and value.h.
1387         (valarith.o): Depend on dfp.h.
1388         (valops.o): Likewise.
1389         * dfp.c: Include expression.h, gdbtypes.h, value.h and dfp.h.
1390         (set_decnumber_context): New function.
1391         (decimal_check_errors): Likewise.
1392         (decimal_from_number): Likewise.
1393         (decimal_to_number): Likewise.
1394         (decimal_from_string): Use set_decnumber_context and
1395         decimal_check_errors.
1396         (decimal_from_integral): New function.
1397         (decimal_from_floating): Likewise.
1398         (decimal_to_double): Likewise.
1399         (promote_decimal): Likewise.
1400         (decimal_binop): Likewise.
1401         (decimal_is_zero): Likewise.
1402         (decimal_compare): Likewise.
1403         (decimal_convert): Likewise.
1404         * dfp.h (decimal_from_integral): New prototype.
1405         (decimal_from_floating): Likewise.
1406         (decimal_to_double): Likewise.
1407         (decimal_binop): Likewise.
1408         (decimal_is_zero): Likewise.
1409         (decimal_compare): Likewise.
1410         (decimal_convert): Likewise.
1411         * eval.c (evaluate_subexp_standard): Remove expect_type argument from
1412         call to value_from_decfloat.
1413         * valarith.c: Include dfp.h.
1414         (value_args_as_decimal): New function.
1415         (value_binop): Add if block to handle TYPE_CODE_DECFLOAT values.
1416         (value_logical_not): Likewise.
1417         (value_equal): Likewise.
1418         (value_less): Likewise.
1419         (value_pos): Likewise.
1420         (value_neg): Formatting fix.
1421         * valops.c: Include dfp.h.
1422         (value_cast): Add if block to handle TYPE_CODE_DECFLOAT values.
1423         * value.c (unpack_long): Add case to handle TYPE_CODE_DECFLOAT.
1424         (unpack_double): Add if block to handle TYPE_CODE_DECFLOAT.
1425         (value_from_decfloat): Remove expect_type argument.
1426         * value.h (value_from_decfloat): Update prototype.
1427
1428 2008-01-07  Vladimir Prus  <vladimir@codesourcery.com>
1429
1430         Ignore change in name of dynamic linker during
1431         execution on Solaris.  This also unbreaks pending breakpoints.
1432
1433         * solist.h (struct target_so_ops): New field same.
1434         * solib-svr4.c (svr4_same): New.
1435         (_initialize_svr4_solib): Register svr4_same.
1436         * solib.c (update_solib_list): Use ops->same, if available.
1437
1438 2008-01-06  Christopher Faylor  <me+cygwin@cgf.cx>
1439
1440         * win32-nat.c (win32_make_so): Use cygwin-style path to avoid warnings
1441         when using MS-DOS paths.
1442
1443 2008-01-05  Pedro Alves  <pedro@codesourcery.com>
1444
1445         * NEWS: Mention --pid and --core command line behaviour changes.
1446
1447 2008-01-05  Pedro Alves  <pedro@codesourcery.com>
1448
1449         * main.c (captured_main): Remove 'count' varible and the
1450         ALIGN_STACK_ON_ENTRY block that used it.  Error out if --core and
1451         --pid options were issued simultaneously.  If an explicit pid
1452         option was passed, don't fallback to core file.  Detect extra
1453         arguments better in the presence of explicit pid or core
1454         arguments.
1455
1456 2008-01-05  Joel Brobecker  <brobecker@adacore.com>
1457
1458         * ada-lang.c (ada_which_variant_applies): Correctly compute
1459         the value of the discriminant when the variant record is packed.
1460
1461 2008-01-04  Joel Brobecker  <brobecker@adacore.com>
1462
1463         * ada-lang.c (is_name_suffix): Handle middle-name numeric suffixes
1464         that are used to differentiate homonyms.
1465
1466 2008-01-04  Jerome Guitton  <guitton@adacore.com>
1467
1468         * ada-lang.c (decode_packed_array_type): Avoid a seg fault
1469         when the type is an anonymous pointer type.
1470         (ada_check_typedef): Avoid a seg fault when the type is null.
1471         * ada-typeprint.c (print_array_type): Add support for pointer
1472         to packed arrays.
1473
1474 2008-01-04  Paul N. Hilfinger  <hilfinger@adacore.com>
1475
1476         * ada-exp.y: Allow '{type} ADDRESS' notation on left of assignment.
1477
1478 2008-01-04  Joel Brobecker  <brobecker@adacore.com>
1479
1480         * ada-lang.c (ada_evaluate_subexp): Evaluate tagged types in
1481         EVAL_NORMAL mode when noside is EVAL_AVOID_SIDE_EFFECTS.
1482
1483 2008-01-04  Joel Brobecker  <brobecker@adacore.com>
1484
1485         * ada-exp.y (chop_separator): New function.
1486         (write_selectors): Rewrite to re-use chop_separator.
1487         (ada_nget_field_index, get_symbol_field_type): New functions.
1488         (write_var_or_type): Add support for "ptype TYPENAME.FIELD"
1489         expressions.
1490
1491 2008-01-03  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1492
1493         * symtab.c (find_pc_sect_line): Use SYMBOL_VALUE_ADDRESS instead
1494         of SYMBOL_VALUE when working with function symbols.
1495
1496 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1497
1498         * ada-lang.c (resolve_subexp): Add handling of OP_REGISTER
1499         expressions.  These expressions do not need to be rewriten.
1500
1501 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1502
1503         * dwarf2read.c (read_enumeration_type): Flag type as stub if
1504         the given die is a declaration.
1505
1506 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1507
1508         * ada-lang.c (ada_array_bound_from_type): Make non-static.
1509         Handle properly the case when the index type is an enumerated type.
1510         Do not return the subtype of the bounds type, just return the
1511         bounds type directly - this is not needed and is more consistent
1512         with what we do for arrays when no XA parallel type exists.
1513
1514 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1515
1516         * ada-lang.c (static_unwrap_type): Add forward declaration.
1517         (template_to_static_fixed_type): Fields of dynamic types sometimes
1518         also need to be unwrapped. Take this into account.
1519         (ada_to_fixed_type_1): Renamed from ada_to_fixed_type.
1520         (ada_to_fixed_type): New wrapper around ada_to_fixed_type_1.
1521         * ada-typeprint.c (ada_print_type): Get the typename from
1522         the original type, not the base type.
1523
1524 2008-01-03  Jerome Guitton  <guitton@adacore.com>
1525
1526         * ada-lang.c (ada_value_struct_elt, to_fixed_array_type)
1527         (to_fixed_array_type, ada_to_fixed_value_create, unwrap_value):
1528         Update calls to ada_to_fixed_type.
1529         (ada_template_to_fixed_record_type_1): Ditto, but without looking
1530         for the tag.
1531         (ada_to_fixed_type): Add check_tag parameter; do not look for
1532         tag if null.  When looking for a tag, use a fixed record type.
1533         * ada-lang.h (ada_to_fixed_type): Add check_tag parameter.
1534         * ada-valprint.c (printable_val_type, ada_value_print): Update
1535         calls to ada_to_fixed_type.
1536
1537 2008-01-03  Luis Machado  <luisgpm@br.ibm.com>
1538
1539         * doublest.c (convert_floatformat_to_doublest): Call
1540         floatformat_to_doublest instead of floatformat_to_double and use
1541         DOUBLEST variables.
1542         (convert_doublest_to_floatformat): Call floatformat_from_doublest
1543         instead of floatformat_from_double and use DOUBLEST variables.
1544
1545 2008-01-03  Nick Hudson  <nick.hudson@dsl.pipex.com>
1546
1547         * MAINTAINERS (Write After Approval): Add self.
1548
1549 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1550
1551         * symfile.c (set_initial_language): Make non-static.
1552         * symfile.h (set_initial_language): Add declaration.
1553         * language.c: #include "symfile.h".
1554         (set_language): Call set_initial_language if the frame language
1555         could not be determined.
1556
1557 2008-01-03  Paul N. Hilfinger  <hilfinger@adacore.com>
1558
1559         * eval.c (evaluate_subexp_for_address): Provide frame address to
1560         locate_var_value only if it will be needed.
1561
1562 2008-01-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
1563
1564         * linux-nat.c (linux_child_follow_fork): Call also CHECK_FOR_THREAD_DB.
1565
1566 2008-01-02  Joel Brobecker  <brobecker@adacore.com>
1567
1568         * ada-lang.c (ada_evaluate_subexp): Modify the value returned
1569         when noside is EVAL_AVOID_SIDE_EFFECTS to be an lval_memory.
1570         This is needed to make sure that any other treatment applied
1571         to the resulting value does not fail for spurious reason,
1572         such as trying to take the address of this value.
1573
1574 2008-01-02  Joel Brobecker  <brobecker@adacore.com>
1575
1576         * ada-lang.c (ada_value_equal): Dereference reference types when
1577         comparing arrays.
1578
1579 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
1580
1581         Updated copyright notices for most files.
1582
1583 2008-01-01  Christopher Faylor  <me+gdb@cgf.cx>
1584
1585         * win32-nat.c (psapi_module_handle): Remove static.
1586         (get_module_name): Rename from psapi_get_dll_name.  Revamp slightly to
1587         return first module found if base_address is zero.  Don't initialize
1588         psapi function pointers here.  Convert to cygwin paths when
1589         appropriate.
1590         (win32_pid_to_exec_file): Use Cygwin's /proc interface to determine
1591         executable name.  Use get_module_name when that fails or when
1592         !__CYGWIN__.
1593         (_initialize_psapi): New function.  Initialize psapi stuff before it is
1594         needed or issue a warning if it is not found.  Move psapi_module_handle
1595         here.
1596
1597 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1598
1599         * ada-lang.c (ada_remove_trailing_digits): New function.
1600         (ada_remove_po_subprogram_suffix): New function.
1601         (ada_decode): Improve. Move the description of the algorithm
1602         directly inside the code, instead of in the function global
1603         description.
1604
1605 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1606
1607         * ada-valprint.c (ada_val_print_1) [TYPE_CODE_REF]: Ignore deref_ref
1608         and always print the dereferenced value.
1609
1610 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1611
1612         * ada-lang.c (ada_evaluate_subexp, case BINOP_SUB): Add handling
1613         of the case where the first argument is a reference.
1614         (ada_evaluate_subexp, case BINOP_ADD): Likewise.
1615
1616 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1617
1618         Implement support for Ada interface types.
1619
1620         * ada-lang.c (ada_is_dispatch_table_ptr_type): New function.
1621         (ada_is_ignored_field): Ignore fields that are a dispatch table
1622         of a tagged type.
1623
1624 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1625
1626         * top.c (print_gdb_version): Update copyright year.
1627
1628 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1629
1630         * ChangeLog-2007: New ChangeLog rotation.
1631         * ChangeLog: Reset for 2008.
1632         * config/djgpp/fnchange.lst: Add entries for ChangeLog-2006 and
1633         ChangeLog-2007.
1634
1635 For older changes see ChangeLog-2007.
1636 \f
1637 Local Variables:
1638 mode: change-log
1639 left-margin: 8
1640 fill-column: 74
1641 version-control: never
1642 coding: utf-8
1643 End: