1 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
3 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
4 set_gdbarch_convert_from_func_ptr_addr and
5 set_gdbarch_elf_make_msymbol_special for ELFv1.
6 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
7 function descriptors on ELFv1.
8 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
9 set up r12 at function entry.
11 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
13 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
14 (struct gdbarch_tdep): New member elf_abi.
16 * rs6000-tdep.c: Include "elf/ppc64.h".
17 (rs6000_gdbarch_init): Detect ELF ABI version.
19 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
21 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
22 within a register pair holding a DFP 128-bit value on little-endian.
23 (ppc64_sysv_abi_return_value_base): Likewise.
24 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
25 (dfp_pseudo_register_write): Likewise.
27 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
29 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
30 offset on little-endian when passing _Decimal32.
31 (ppc64_sysv_abi_return_value_base): Likewise for return values.
33 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
35 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
36 of the overlapped FP register within the VSX register on little-
38 (efpr_pseudo_register_write): Likewise.
40 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
42 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
43 offset on little-endian when passing small structures.
45 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
47 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
48 (struct ppc64_sysv_argpos): New data structure.
49 (ppc64_sysv_abi_push_float): Remove.
50 (ppc64_sysv_abi_push_val): New function.
51 (ppc64_sysv_abi_push_integer): Likewise.
52 (ppc64_sysv_abi_push_freg): Likewise.
53 (ppc64_sysv_abi_push_vreg): Likewise.
54 (ppc64_sysv_abi_push_param): Likewise.
55 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
56 (ppc64_sysv_abi_return_value_base): New function.
57 (ppc64_sysv_abi_return_value): Refactor to use it.
59 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
61 * NEWS: Document new target powerpc64le-*-linux*.
63 2014-02-04 Mark Kettenis <kettenis@gnu.org>
65 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
66 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
68 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
69 register set used in ELF core dumps. Add floating-point register set.
71 2014-02-03 Kevin Buettner <kevinb@redhat.com>
73 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
74 dwarf2_to_gdb[] table using symbolic constants. Adjust
75 penultimate entry from number representing the PC register
76 to symbolic constant representing the MDR register. Add
77 constant for the PC register to the end of the table.
79 2014-02-03 Mark Kettenis <kettenis@gnu.org>
81 * bsd-kvm.c: Include <sys/param.h>
83 2014-02-03 Mark Kettenis <kettenis@gnu.org>
85 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
87 2014-01-31 Joel Brobecker <brobecker@adacore.com>
89 * ada-lang.h (clear_ada_sym_cache): Delete.
91 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
93 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
95 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
97 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
98 the sigreturn register save area only if the syscall is
101 2014-01-29 Joel Brobecker <brobecker@adacore.com>
103 * valops.c (value_slice): Minor reformatting.
105 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
107 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
109 2014-01-28 Joel Brobecker <brobecker@adacore.com>
111 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
113 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
114 (ada_ignore_descriptive_types_p): New static global.
115 (find_parallel_type_by_descriptive_type): Return immediately
116 if ada_ignore_descriptive_types_p is set.
117 (_initialize_ada_language): Register new commands "maintenance
118 set ada", "maintenance show ada", "maintenance set ada
119 ignore-descriptive-types" and "maintenance show ada
120 ignore-descriptive-types".
121 * NEWS: Add entry for new "maint ada set/show
122 ignore-descriptive-types" commands.
124 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
126 * record-btrace.c (record_btrace_close): Call btrace_teardown
129 2014-01-27 Joel Brobecker <brobecker@adacore.com>
131 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
134 2014-01-27 Joel Brobecker <brobecker@adacore.com>
136 * ada-typeprint (type_is_full_subrange_of_target_type):
138 (print_range): Add parameter bounds_prefered_p. If not set,
139 try printing range types using the name of their base type.
140 (print_range_type): Add parameter bounds_prefered_p.
141 Use it in call to print_range.
142 (print_array_type, ada_print_type): Update calls to print_range
143 and print_range_type.
145 2014-01-27 Joel Brobecker <brobecker@adacore.com>
147 * ada-typeprint.c (print_array_type, print_choices, print_range)
148 (print_range_bound, print_dynamic_range_bound, print_range_type):
151 2014-01-27 Joel Brobecker <brobecker@adacore.com>
153 * ada-typeprint.c (print_range): Add missing empty line
154 after local declaration.
156 2014-01-27 Joel Brobecker <brobecker@adacore.com>
158 * ada-valprint.c (print_optional_low_bound): Get index_type's
159 target type for as long as it is a TYPE_CODE_RANGE.
161 2014-01-27 Joel Brobecker <brobecker@adacore.com>
163 * procfs.c (procfs_make_note_section): Remove assertion and
166 2014-01-24 Yao Qi <yao@codesourcery.com>
168 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
169 * corelow.c (get_core_siginfo): Likewise.
171 2014-01-24 Yao Qi <yao@codesourcery.com>
173 * remote.c (remote_write_bytes_aux): Change type of 'len' to
174 ULONGEST. Don't check 'len' is negative.
175 (remote_write_bytes): Change type of 'len' to ULONGEST.
177 2014-01-23 Tom Tromey <tromey@redhat.com>
180 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
181 Handle exception from frame.block.
182 (FrameVars.fetch_frame_locals): Likewise.
184 2014-01-23 Tom Tromey <tromey@redhat.com>
187 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
188 on a NULL pointer. Move "goto error" to correct place.
190 2014-01-23 Tom Tromey <tromey@redhat.com>
193 * python/py-framefilter.c (apply_frame_filter): Call
194 ensure_python_env after computing gdbarch.
196 2014-01-23 Yao Qi <yao@codesourcery.com>
198 * target.c (raw_memory_xfer_partial): Change argument type
199 from void * to gdb_byte *.
200 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
202 2014-01-22 Doug Evans <dje@google.com>
204 New gdbserver option --debug-format=timestamp.
207 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
209 * syscalls/s390x-linux.xml: New file.
210 * syscalls/s390-linux.xml: New file.
211 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
212 (XML_SYSCALL_FILENAME_S390X): Likewise.
213 (op_svc): New enum value for SVC opcode.
214 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
215 (s390_linux_get_syscall_number): New function.
216 (s390_gdbarch_init): Register '*get_syscall_number' and the
217 syscall xml file name.
218 * data-directory/Makefile.in (SYSCALLS_FILES): Add
219 "s390-linux.xml" and "s390x-linux.xml".
220 * NEWS: Announce new feature.
222 2014-01-22 Baruch Siach <baruch@tkos.co.il>
224 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
226 2014-01-22 Pedro Alves <palves@redhat.com>
228 * xtensa-config.c: Include defs.h.
230 2014-01-22 Joel Brobecker <brobecker@adacore.com>
232 * common/common-utils.h: Add "ARI:" comment beside __func__
235 2014-01-22 Joel Brobecker <brobecker@adacore.com>
237 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
240 2014-01-21 Roland McGrath <mcgrathr@google.com>
242 * configure.ac: Call AM_PROG_INSTALL_STRIP.
243 * configure: Regenerate.
244 * aclocal.m4: Regenerate.
245 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
246 New substituted variables.
247 (install-strip): New target.
248 (INSTALL_SCRIPT): New substituted variable.
249 (FLAGS_TO_PASS): Add it.
250 (install-only): Use $(INSTALL_SCRIPT) rather than
251 $(INSTALL_PROGRAM) for gcore.
253 2014-01-20 Tom Tromey <tromey@redhat.com>
255 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
258 2014-01-20 Tom Tromey <tromey@redhat.com>
260 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
261 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
262 (deprecated_cmd_warning, complete_on_cmdlist): Update.
263 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
264 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
265 (struct cmd_list_element) <flags>: Remove.
266 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
267 doc_allocated>: New fields.
268 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
270 * maint.c (maintenance_do_deprecate): Update.
271 * top.c (execute_command): Update.
273 2014-01-20 Baruch Siach <baruch@tkos.co.il>
275 * xtensa-linux-nat.c: Include asm/ptrace.h.
277 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
279 * Makefile.in (SFILES): Add d-support.c.
280 (COMMON_OBS): Add d-support.o.
281 * d-lang.h (d_parse_symbol): Add comment, now defined in
283 * d-lang.c (parse_call_convention)
284 (parse_attributes, parse_function_types)
285 (parse_function_args, parse_type, parse_identifier)
286 (call_convention_p, d_parse_symbol): Move functions to ...
287 * d-support.c: ... New file.
289 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
291 * d-lang.h (d_parse_symbol): Add declaration.
292 * d-lang.c (extract_identifiers)
293 (extract_type_info): Remove functions.
294 (parse_call_convention, parse_attributes)
295 (parse_function_types, parse_function_args)
296 (parse_type, parse_identifier, call_convention_p)
297 (d_parse_symbol): New functions.
298 (d_demangle): Use d_parse_symbol to demangle D symbols.
300 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
302 * d-lang.h (struct builtin_d_type): New data type.
303 (builtin_d_type): Add declaration.
304 * d-lang.c (d_language_arch_info, build_d_types)
305 (builtin_d_type): New functions.
306 (enum d_primitive_types): New data type.
307 (d_language_defn): Change c_language_arch_info to
308 d_language_arch_info.
309 (d_type_data): New static variable.
310 (_initialize_d_language): Initialize d_type_data.
312 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
314 * d-lang.h (d_main_name): Add declaration.
315 * d-lang.c (d_main_name): New function.
316 * symtab.c (find_main_name): Add call to d_main_name.
318 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
320 * d-lang.c (d_language_defn): Change macro_expansion_c to
323 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
325 * MAINTAINERS: Add myself as a write-after-approval maintainer.
327 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
329 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
330 gdb_exception" declaration.
331 * remote.c (getpkt_or_notif_sane): Likewise.
333 2014-01-17 Doug Evans <dje@google.com>
335 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
336 function, contents of dirnames_to_char_ptr_vec_append moved here.
337 (delim_string_to_char_ptr_vec): New function.
338 (dirnames_to_char_ptr_vec_append): Rewrite.
339 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
341 2014-01-17 Doug Evans <dje@google.com>
343 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
345 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
346 #include "common-utils.h".
347 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
348 * common/vec.h (VEC_ASSERT_PASS): Update.
349 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
350 (MACH_CHECK_ERROR): Update.
352 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
354 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
356 * gdbarch.h: Regenerate.
358 2014-01-16 Tom Tromey <tromey@redhat.com>
360 * value.c (struct value) <regnum>: Move earlier.
362 2014-01-16 Tom Tromey <tromey@redhat.com>
364 * remote.c (extended_remote_create_inferior): Rename from
365 extended_remote_create_inferior_1. Add "ops" argument. Remove
368 2014-01-16 Pedro Alves <palves@redhat.com>
370 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
371 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
374 2014-01-16 Doug Evans <dje@google.com>
376 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
378 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
380 * btrace.h (btrace_thread_flag): New.
381 (struct btrace_thread_info) <flags>: New.
382 * record-btrace.c (record_btrace_resume_thread)
383 (record_btrace_find_thread_to_move, btrace_step_no_history)
384 (btrace_step_stopped, record_btrace_start_replaying)
385 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
386 (record_btrace_find_resume_thread): New.
387 (record_btrace_resume, record_btrace_wait): Extend.
388 (record_btrace_can_execute_reverse): New.
389 (record_btrace_open): Fail in non-stop mode.
390 (record_btrace_set_replay): Split into this, ...
391 (record_btrace_stop_replaying): ... this, ...
392 (record_btrace_clear_histories): ... and this.
393 (init_record_btrace_ops): Init to_can_execute_reverse.
396 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
398 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
399 (forward_target_decr_pc_after_break)
400 (target_decr_pc_after_break): New.
401 * target.c (forward_target_decr_pc_after_break)
402 (target_decr_pc_after_break): New.
403 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
404 instead of gdbarch_decr_pc_after_break.
405 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
406 instead of gdbarch_decr_pc_after_break.
407 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
408 instead of gdbarch_decr_pc_after_break.
409 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
410 instead of gdbarch_decr_pc_after_break.
411 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
412 instead of gdbarch_decr_pc_after_break.
413 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
414 instead of gdbarch_decr_pc_after_break.
416 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
418 * btrace.c: Include regcache.h.
419 (btrace_add_pc): New.
420 (btrace_enable): Call btrace_add_pc.
421 (btrace_is_empty): New.
422 * btrace.h (btrace_is_empty): New.
423 * record-btrace.c (require_btrace, record_btrace_info): Call
426 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
428 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
430 (linux_disable_btrace): Change return type.
431 * common/linux-btrace.h (linux_read_btrace): Change parameters
432 and return type to allow error reporting. Update users.
433 (linux_disable_btrace): Change return type. Update users.
434 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
437 (btrace_block) <begin>: Comment on BEGIN == 0.
438 * btrace.c (btrace_compute_ftrace): Start from the end of
440 (btrace_stitch_trace, btrace_clear_history): New.
441 (btrace_fetch): Read delta trace, return if replaying.
442 (btrace_clear): Move clear history code to btrace_clear_history.
443 (parse_xml_btrace): Throw an error if parsing failed.
444 * target.h (struct target_ops) <to_read_btrace>: Change parameters
445 and return type to allow error reporting.
446 (target_read_btrace): Change parameters and return type to allow
448 * target.c (target_read_btrace): Update.
449 * remote.c (remote_read_btrace): Support delta reads. Pass
453 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
455 * record.h (record_btrace_frame_unwind)
456 (record_btrace_tailcall_frame_unwind): New declarations.
457 * dwarf2-frame: Include record.h
458 (dwarf2_frame_cfa): Throw an error for btrace frames.
459 * record-btrace.c: Include hashtab.h.
460 (btrace_get_bfun_name): New.
461 (btrace_call_history): Call btrace_get_bfun_name.
462 (struct btrace_frame_cache): New.
464 (bfcache_hash, bfcache_eq, bfcache_new): New.
465 (btrace_get_frame_function): New.
466 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
467 (record_btrace_frame_this_id): Compute own id.
468 (record_btrace_frame_prev_register): Provide PC, throw_error
469 for all other registers.
470 (record_btrace_frame_sniffer): Detect btrace frames.
471 (record_btrace_tailcall_frame_sniffer): New.
472 (record_btrace_frame_dealloc_cache): New.
473 (record_btrace_frame_unwind): Add new functions.
474 (record_btrace_tailcall_frame_unwind): New.
475 (_initialize_record_btrace): Allocate cache.
476 * btrace.c (btrace_clear): Call reinit_frame_cache.
479 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
481 * record-btrace.c (record_btrace_set_replay)
482 (record_btrace_goto_begin, record_btrace_goto_end)
483 (record_btrace_goto): New.
484 (init_record_btrace_ops): Initialize them.
487 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
489 * record-btrace.c (record_btrace_find_new_threads)
490 (record_btrace_thread_alive): New.
491 (init_record_btrace_ops): Initialize to_find_new_threads and
494 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
496 * record-btrace.c (record_btrace_resume): New.
497 (record_btrace_wait): New.
498 (init_record_btrace_ops): Initialize to_wait and to_resume.
500 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
502 * record-btrace.c (record_btrace_xfer_partial)
503 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
504 (record_btrace_allow_memory_access): New.
505 (init_record_btrace_ops): Initialize new methods.
506 * target.c (raw_memory_xfer_partial): Bail out if target reports
507 that this memory is not available.
509 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
511 * target.h (target_ops) <to_insert_breakpoint>
512 <to_remove_breakpoint>: Add target_ops parameter.
513 (forward_target_insert_breakpoint): New.
514 (forward_target_remove_breakpoint): New.
515 (memory_remove_breakpoint, memory_insert_breakpoint):
516 Add target_ops parameter.
517 * target.c (target_insert_breakpoint): Split into this and ...
518 (forward_target_insert_breakpoint): ... this.
519 (target_remove_breakpoint): Split into this and ...
520 (forward_target_remove_breakpoint): ... this.
521 (debug_to_insert_breakpoint): Add target_ops parameter.
522 Call forward_target_insert_breakpoint.
523 (debug_to_remove_breakpoint): Add target_ops parameter.
524 Call forward_target_remove_breakpoint.
525 (update_current_target): Do not inherit or default to_insert_breakpoint
526 and to_remove_breakpoint.
527 * corelow.c (ignore): Add target_ops parameter.
528 * exec.c (ignore): Add target_ops parameter.
529 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
530 Add target_ops parameter.
531 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
532 Add target_ops parameter.
533 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
534 Add target_ops parameter.
535 * record-full.c (record_full_beneath_to_insert_breakpoint)
536 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
537 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
538 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
539 (record_full_core_remove_breakpoint): Add target_ops parameter.
541 (record_full_beneath_to_insert_breakpoint_ops)
542 (record_full_beneath_to_remove_breakpoint_ops)
543 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
544 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
545 tmp_to_remove_breakpoint_ops,
546 record_full_beneath_to_insert_breakpoint_ops, and
547 record_full_beneath_to_remove_breakpoint_ops.
548 * remote-m32r-sdi.c (m32r_insert_breakpoint)
549 (m32r_remove_breakpoint): Add target_ops parameter.
550 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
551 Add target_ops parameter.
552 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
553 Add target_ops parameter.
555 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
556 Markus Metzger <markus.t.metzger@intel.com>
558 * record-btrace.c: Include frame-unwind.h.
559 (record_btrace_frame_unwind_stop_reason)
560 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
561 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
563 (init_record_btrace_ops): Install it.
565 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
567 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
570 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
572 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
575 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
577 * frame-unwind.c: Include target.h.
578 (frame_unwind_try_unwinder): New function with code from ...
579 (frame_unwind_find_by_frame): ... here. New variable
580 unwinder_from_target, call also target_get_unwinder)
581 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
582 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
583 * target.h (struct target_ops): New fields to_get_unwinder and
584 to_get_tailcall_unwinder.
585 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
587 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
589 * record-btrace.c (record_btrace_fetch_registers)
590 (record_btrace_store_registers)
591 (record_btrace_to_prepare_to_store): New.
592 (init_record_btrace_ops): Add the above.
594 2014-01-16 Tom Tromey <tromey@redhat.com>
596 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
597 * target.h (struct target_ops) <to_prepare_to_store>: Add
599 (target_prepare_to_store): Add argument.
600 * target.c (debug_to_prepare_to_store): Add argument.
601 (update_current_target): Update.
602 * remote.c (remote_prepare_to_store): Add 'self' argument.
603 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
604 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
605 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
606 * record-full.c (record_full_core_prepare_to_store): Add 'self'
608 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
609 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
610 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
611 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
612 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
614 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
616 * btrace.h (replay) <replay>: New.
617 (btrace_is_replaying): New.
618 * btrace.c (btrace_clear): Free replay iterator.
619 (btrace_is_replaying): New.
620 * record-btrace.c (record_btrace_is_replaying): New.
621 (record_btrace_info): Print insn number if replaying.
622 (record_btrace_insn_history): Start at replay position.
623 (record_btrace_call_history): Start at replay position.
624 (init_record_btrace_ops): Init to_record_is_replaying.
626 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
628 * record-btrace.c (record_btrace_insn_history_range): Include
630 (record_btrace_insn_history_from): Adjust range.
631 (record_btrace_call_history_range): Include
633 (record_btrace_call_history_from): Adjust range.
634 * NEWS: Announce changes.
636 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
638 * record.h (enum record_print_flag)
639 <record_print_indent_calls>: New.
640 * record.c (get_call_history_modifiers): Recognize /c modifier.
641 (_initialize_record): Document /c modifier.
642 * record-btrace.c (btrace_call_history): Add btinfo parameter.
643 Reorder fields. Optionally indent the function name. Update
645 * NEWS: Announce changes.
647 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
649 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
651 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
653 * btrace.c (ftrace_new_function): Start counting at one.
654 * record-btrace.c (record_btrace_info): Adjust number of calls
658 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
660 * record-btrace.c (btrace_call_history_insn_range): Print
661 insn range as [begin, end].
663 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
665 * btrace.h (struct btrace_func_link): New.
666 (enum btrace_function_flag): New.
667 (struct btrace_inst): Rename to ...
668 (struct btrace_insn): ...this. Update all users.
669 (struct btrace_func) <ibegin, iend>: Remove.
670 (struct btrace_func_link): New.
671 (struct btrace_func): Rename to ...
672 (struct btrace_function): ...this. Update all users.
673 (struct btrace_function) <segment, flow, up, insn, insn_offset)
674 (number, level, flags>: New.
675 (struct btrace_insn_iterator): Rename to ...
676 (struct btrace_insn_history): ...this.
678 (struct btrace_insn_iterator, btrace_call_iterator): New.
679 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
680 (struct btrace_target_info) <begin, end, level>
681 <insn_history, call_history>: New.
682 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
683 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
684 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
685 (btrace_call_number, btrace_call_begin, btrace_call_end)
686 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
687 (btrace_find_function_by_number, btrace_set_insn_history)
688 (btrace_set_call_history): New.
689 * btrace.c (btrace_init_insn_iterator)
690 (btrace_init_func_iterator, compute_itrace): Remove.
691 (ftrace_print_function_name, ftrace_print_filename)
692 (ftrace_skip_file): Change
694 (ftrace_init_func): Remove.
695 (ftrace_debug): Use new btrace_function fields.
696 (ftrace_function_switched): Also consider gaining and
697 losing symbol information).
698 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
699 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
700 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
702 (ftrace_new_function): Move. Remove debug print.
703 (ftrace_update_lines, ftrace_update_insns): New.
704 (ftrace_update_function): Check for call, ret, and jump.
705 (compute_ftrace): Renamed to ...
706 (btrace_compute_ftrace): ...this. Rewritten to compute call
708 (btrace_fetch, btrace_clear): Updated.
709 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
710 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
711 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
712 (btrace_call_number, btrace_call_begin, btrace_call_end)
713 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
714 (btrace_find_function_by_number, btrace_set_insn_history)
715 (btrace_set_call_history): New.
716 * record-btrace.c (require_btrace): Use new btrace thread
718 (record_btrace_info, btrace_insn_history)
719 (record_btrace_insn_history, record_btrace_insn_history_range):
720 Use new btrace thread info fields and new iterator.
721 (btrace_func_history_src_line): Rename to ...
722 (btrace_call_history_src_line): ...this. Use new btrace
724 (btrace_func_history): Rename to ...
725 (btrace_call_history): ...this. Use new btrace thread info
726 fields and new iterator.
727 (record_btrace_call_history, record_btrace_call_history_range):
728 Use new btrace thread info fields and new iterator.
730 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
732 * frame.h (frame_id_build_unavailable_stack_special): New.
733 * frame.c (frame_id_build_unavailable_stack_special): New.
735 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
737 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
738 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
739 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
741 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
742 (i386_insn_is_jump, i386_jmp_p): New.
743 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
744 insn_is_jump to gdbarch.
745 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
746 * gdbarch.h: Regenerated.
747 * gdbarch.c: Regenerated.
748 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
749 (default_insn_is_jump): New.
750 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
751 (default_insn_is_jump): New.
753 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
755 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
757 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
758 (btrace_read_type) <btrace_read_new>: Change to ...
759 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
761 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
763 * common/linux-btrace.c (linux_read_btrace): Free trace from
766 2014-01-15 Doug Evans <dje@google.com>
768 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
771 2014-01-15 Tom Tromey <tromey@redhat.com>
773 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
774 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
775 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
776 (set_objfile_main_name): New function.
777 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
778 language_of_main>: New fields.
779 (set_objfile_main_name): Declare.
780 * symtab.c (find_main_name): Loop over objfiles to find the main
782 (set_main_name): Now static.
783 (get_main_info): Add comment.
784 * symtab.h (set_main_name): Don't declare.
786 2014-01-15 Tom Tromey <tromey@redhat.com>
788 * symtab.c (main_progspace_key): New global.
789 (struct main_info): New.
790 (name_of_main, language_of_main): Remove.
791 (get_main_info, main_info_cleanup): New function.
792 (set_main_name, main_name, main_language): Use get_main_info.
793 (_initialize_symtab): Initialize main_progspace_key.
795 2014-01-15 Tom Tromey <tromey@redhat.com>
797 * dbxread.c (process_one_symbol): Update.
798 * dwarf2read.c (read_partial_die): Update.
799 * symfile.c (set_initial_language): Call main_language.
800 * symtab.c (language_of_main): Now static.
801 (set_main_name): Add 'lang' parameter.
802 (find_main_name): Update.
803 (main_language): New function.
804 (symtab_observer_executable_changed): Update.
805 * symtab.h (set_main_name): Update.
806 (language_of_main): Remove.
807 (main_language): Declare.
809 2014-01-15 Tom Tromey <tromey@redhat.com>
811 * symfile.c (init_entry_point_info): Use new "initialized" field.
813 * objfiles.h (struct entry_point) <initialized>: New field.
814 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
815 (struct objfile) <ei>: ...here. Remove.
816 * objfiles.c (entry_point_address_query): Update.
818 2014-01-15 Tom Tromey <tromey@redhat.com>
820 * objfiles.c (entry_point_address_query): Relocate entry point
822 (objfile_relocate1): Do not relocate entry point address.
823 * objfiles.h (struct entry_info) <entry_point>: Update comment.
824 <the_bfd_section_index>: New field.
825 * symfile.c (init_entry_point_info): Find the entry point's
828 2014-01-15 Tom Tromey <tromey@redhat.com>
830 * solib-frv.c (enable_break): Use entry_point_address_query.
832 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
834 * NEWS: Add note on improved process record-replay on
837 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
839 * arm-tdep.c (enum arm_record_result): New enum.
840 (arm_record_unsupported_insn): New function.
841 (arm_record_coproc_data_proc): Removed.
842 (thumb2_record_ld_st_multiple): New function.
843 (thumb2_record_ld_st_dual_ex_tbb): New function.
844 (thumb2_record_data_proc_sreg_mimm): New function.
845 (thumb2_record_ps_dest_generic): New function.
846 (thumb2_record_branch_misc_cntrl): New function.
847 (thumb2_record_str_single_data): New function.
848 (thumb2_record_ld_mem_hints): New function.
849 (thumb2_record_ld_word): New function.
850 (thumb2_record_lmul_lmla_div): New function.
851 (thumb2_record_decode_insn_handler): New function.
852 (decode_insn): Add thumb32 instruction handlers.
854 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
856 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
857 (struct arm_linux_record_tdep): Declare.
858 (arm_canonicalize_syscall): New function.
859 (arm_all_but_pc_registers_record): New function.
860 (arm_linux_syscall_record): New function.
861 (arm_linux_init_abi): Add syscall recording constructs.
862 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
863 decoding. (arm_record_coproc_data_proc): Update arm syscall
865 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
866 <arm_syscall_record>: New field.
867 * configure.tgt (arm*-*-linux*): Add linux-record.o to
870 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
872 * arm-tdep.c (thumb_record_misc): Update to use sp as base
873 register for push instruction recording.
875 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
877 * arm-tdep.c (thumb_record_misc): Update to correct logical
878 error while recording ldm, ldmia and pop instructions.
880 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
882 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
884 2014-01-15 Pedro Alves <palves@redhat.com>
886 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
887 (go32_resume, go32_fetch_registers, store_register)
888 (go32_store_registers, go32_prepare_to_store)
889 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
890 (go32_create_inferior, go32_can_run, go32_terminal_init)
891 (go32_terminal_inferior, go32_terminal_ours): Delete forward
894 2014-01-15 Tom Tromey <tromey@redhat.com>
896 * target.h (async_callback_ftype): New typedef.
897 (struct target_ops) <to_async>: Use it.
899 2014-01-15 Joel Brobecker <brobecker@adacore.com>
901 * python/py-value.c (get_field_type): Remove unnecessary curly
902 braces for single-statement if block.
904 2014-01-15 Joel Brobecker <brobecker@adacore.com>
906 * python/py-type.c (convert_field): Add missing empty line
909 2014-01-14 Doug Evans <dje@google.com>
911 * symfile.h (expand_symtabs_matching): Renamed from
912 expand_partial_symbol_names. Update prototype.
913 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
914 * symfile.c (expand_symtabs_matching): Renamed from
915 expand_partial_symbol_names. New args file_matcher, kind.
916 Rename arg fun to symbol_matcher.
917 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
918 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
919 ada_expand_partial_symbol_name.
920 (ada_make_symbol_completion_list): Update to call
921 expand_symtabs_matching.
922 (ada_add_global_exceptions): Call expand_symtabs_matching.
923 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
924 call map_symbol_filenames.
925 * symtab.c (sources_info): Update to call map_symbol_filenames.
926 (search_symbols): Call expand_symtabs_matching.
927 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
928 (default_make_symbol_completion_list_break_on): Update to call
929 expand_symtabs_matching.
930 (make_source_files_completion_list): Update to call
931 map_symbol_filenames.
933 2014-01-14 Doug Evans <dje@google.com>
935 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
936 (expand_symtabs_symbol_matcher_ftype): New typedef.
937 (quick_symbol_functions.expand_symtabs_matching): Update to use.
938 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
939 * symfile.c (expand_partial_symbol_names): Update to use
940 expand_symtabs_symbol_matcher_ftype.
941 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
942 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
943 Arg name_matcher renamed to symbol_matcher.
944 * psymtab.c (recursively_search_psymtabs): Update to use
945 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
947 (expand_symtabs_matching_via_partial): Update to use
948 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
949 Arg name_matcher renamed to symbol_matcher.
951 2014-01-14 Doug Evans <dje@google.com>
953 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
954 (map_partial_symbol_filenames): Ditto.
955 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
956 (map_partial_symbol_filenames): Ditto.
957 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
958 (map_partial_symbol_filenames): Ditto.
959 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
960 (map_partial_symbol_filenames): Ditto.
961 * symtab.c: Delete #include "psymtab.h".
963 2014-01-14 Pedro Alves <palves@redhat.com>
964 Tom Tromey <tromey@redhat.com>
966 * infrun.c (use_displaced_stepping): Use find_record_target
967 instead of RECORD_IS_USED.
968 (adjust_pc_after_break): Use record_full_is_used instead of
970 * record-btrace.c (record_btrace_open): Call record_preopen
971 instead of checking RECORD_IS_USED.
972 * record-full.c (record_full_shortname)
973 (record_full_core_shortname): New globals.
974 (record_full_is_used): New function.
975 (find_full_open): Call record_preopen instead of checking
977 (init_record_full_ops): Set the target's shortname to
978 record_full_shortname.
979 (init_record_full_core_ops): Set the target's shortname to
980 record_full_core_shortname.
981 * record-full.h (record_full_is_used): Declare.
982 * record.c (find_record_target): Make extern.
983 (record_preopen): New function.
984 * record.h (RECORD_IS_USED): Delete macro.
985 (find_record_target, record_preopen): Declare functions.
987 2014-01-14 Yao Qi <yao@codesourcery.com>
989 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
990 'len''s type to ULONGEST.
991 (core_xfer_shared_libraries_aix): Likewise.
992 * gdbarch.c, gdbarch.h: Regenerated.
993 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
994 Change type of 'len' to ULONGEST.
995 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
996 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
998 2014-01-14 Yao Qi <yao@codesourcery.com>
1000 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1001 type of 'len' to ULONGEST.
1002 (linux_xfer_osdata_processgroups): Likewise.
1003 (linux_xfer_osdata_threads): Likewise.
1004 (linux_xfer_osdata_fds): Likewise.
1005 (linux_xfer_osdata_isockets): Likewise.
1006 (linux_xfer_osdata_shm): Likewise.
1007 (linux_xfer_osdata_sem): Likewise.
1008 (linux_xfer_osdata_msg): Likewise.
1009 (linux_common_xfer_osdata): Likewise.
1010 (struct osdata_type) <getter>: Likewise.
1011 * common/linux-osdata.h (linux_common_xfer_osdata): Update
1014 2014-01-14 Yao Qi <yao@codesourcery.com>
1016 * target.h (target_xfer_partial_ftype): Update.
1017 (struct target_ops) <to_xfer_partial>: Change 'len' type to
1019 * aix-thread.c (aix_thread_xfer_partial): Change type of
1020 argument 'len' to ULONGEST.
1021 * auxv.c (procfs_xfer_auxv): Likewise.
1022 (ld_so_xfer_auxv): Likewise.
1023 (memory_xfer_auxv): Likewise.
1024 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1025 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1026 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1027 * corelow.c (core_xfer_partial): Likewise.
1028 * ctf.c (ctf_xfer_partial): Likewise.
1029 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1031 (darwin_read_dyld_info): Likewise.
1032 (darwin_xfer_partial): Likewise.
1033 * exec.c (section_table_xfer_memory_partial): Likewise.
1034 (exec_xfer_partial): Likewise.
1035 * exec.h (section_table_xfer_memory_partial): Update
1037 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1038 instead of plongest.
1039 (gnu_xfer_partial): Likewise.
1040 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1041 (ia64_hpux_xfer_solib_got): Likewise.
1042 (ia64_hpux_xfer_partial): Likewise.
1043 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1044 * inf-ptrace.c (inf_ptrace_xfer_partial):
1045 * inf-ttrace.c (inf_ttrace_xfer_partial):
1046 * linux-nat.c (linux_xfer_siginfo): Likewise.
1047 (linux_nat_xfer_partial): Likewise.
1048 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1049 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1050 * monitor.c (monitor_xfer_memory): Likewise.
1051 (monitor_xfer_partial): Likewise.
1052 * procfs.c (procfs_xfer_partial): Likewise.
1053 * record-full.c (record_full_xfer_partial): Likewise.
1054 (record_full_core_xfer_partial): Likewise.
1055 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1056 instead of plongest.
1057 (gdbsim_xfer_partial): Likewise.
1058 * remote.c (remote_xfer_partial): Likewise.
1059 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1060 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1062 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1063 (rs6000_xfer_shared_libraries): Likewise.
1064 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1065 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1066 (sparc_xfer_partial): Likewise.
1067 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1068 (spu_xfer_partial): Likewise.
1069 * spu-multiarch.c (spu_xfer_partial): Likewise.
1070 * target.c (target_read_live_memory): Likewise.
1071 (memory_xfer_live_readonly_partial): Likewise.
1072 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1073 (target_xfer_partial, default_xfer_partial): Likewise.
1074 (current_xfer_partial): Likewise.
1075 * tracepoint.c (tfile_xfer_partial): Likewise.
1076 * windows-nat.c (windows_xfer_memory): Likewise. Call
1077 pulongest instead of plongest.
1078 (windows_xfer_partial): Likewise.
1079 (windows_xfer_shared_libraries): Likewise.
1081 2014-01-14 Yao Qi <yao@codesourcery.com>
1083 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1084 target_xfer_partial_ftype.
1086 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1090 * valops.c (value_struct_elt_bitpos): New function
1091 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1092 object to 'None' if the field name is an empty string ("").
1093 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1094 attribute to look for a field when 'name' is 'None'.
1095 (get_field_type): New function
1097 2014-01-13 Doug Evans <dje@google.com>
1100 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1101 (try_open_dwop_file): Ditto.
1102 * gdb_bfd.c: #include "vec.h".
1103 (bfdp): New typedef.
1104 (struct gdb_bfd_data): New member included_bfds.
1105 (gdb_bfd_unref): Unref all included bfds.
1106 (gdb_bfd_record_inclusion): New function.
1107 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1109 2014-01-13 Tom Tromey <tromey@redhat.com>
1111 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1113 2014-01-13 Tom Tromey <tromey@redhat.com>
1115 * defs.h (use_windows): Remove.
1116 * gdb.c (main): Update.
1117 * main.c (captured_main, gdb_main): Update.
1118 * main.h (struct captured_main_args) <use_windows>: Remove.
1119 * top.c (use_windows): Remove.
1121 2014-01-13 Tom Tromey <tromey@redhat.com>
1123 * defs.h (deprecated_flush_hook): Remove.
1125 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1128 * linux-thread-db.c (try_thread_db_load): Add parameter
1129 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1130 (try_thread_db_load_from_pdir_1): Move it there from here.
1131 (try_thread_db_load_from_sdir): Update caller.
1132 (try_thread_db_load_from_dir): Move it there from here.
1134 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1136 * regformats/regdat.sh: Always rewrite the register file.
1138 2014-01-13 Pedro Alves <palves@redhat.com>
1140 * Makefile.in (CHECK_HEADERS): New variable.
1141 (check-headers:): New rule.
1143 2014-01-13 Tom Tromey <tromey@redhat.com>
1145 * cli/cli-setshow.c (do_set_command): Update.
1146 * defs.h (deprecated_set_hook): Remove.
1147 * top.c (deprecated_set_hook): Remove.
1149 2014-01-13 Pedro Alves <palves@redhat.com>
1151 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1152 the tracepoint if the PC is a pseudo-register.
1154 2014-01-13 Tom Tromey <tromey@redhat.com>
1156 * defs.h (XCALLOC): Remove.
1157 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1158 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1159 * dwarf2loc.c (allocate_piece_closure): Likewise.
1160 * elfread.c (elf_symfile_segments): Likewise.
1161 (elf_symfile_segments): Likewise.
1162 * gdbtypes.c (copy_type_recursive): Likewise.
1163 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1164 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1165 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1167 * mt-tdep.c (mt_gdbarch_init): Likewise.
1168 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1170 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1171 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1172 * registry.c (registry_alloc_data): Likewise.
1173 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1174 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1175 * serial.c (serial_fdopen_ops): Likewise.
1176 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1178 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1179 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1182 2014-01-13 Tom Tromey <tromey@redhat.com>
1184 * defs.h (XMALLOC): Remove.
1185 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1186 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1187 * cli-out.c (struct ui_out *): Likewise.
1188 * cli/cli-dump.c (add_dump_command): Likewise.
1189 (add_dump_command): Likewise.
1190 * complaints.c (get_complaints): Likewise.
1191 (find_complaint): Likewise.
1192 * dwarf2-frame.c (execute_cfa_program): Likewise.
1193 * dwarf2read.c (abbrev_table_read_table): Likewise.
1194 * gdbarch.sh: Likewise.
1195 * gdbarch.c: Rebuild.
1196 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1197 * interps.c (interp_new): Likewise.
1198 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1199 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1200 * mi/mi-console.c (mi_console_file_new): Likewise.
1201 * mi/mi-interp.c (mi_interpreter_init): Likewise.
1202 * mi/mi-out.c (mi_out_new): Likewise.
1203 * mi/mi-parse.c (mi_parse): Likewise.
1204 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1205 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1206 * observer.c (xalloc_observer_list_node): Likewise.
1207 * regcache.c (regcache_xmalloc_1): Likewise.
1208 * reggroups.c (reggroup_new): Likewise.
1209 (_initialize_reggroup): Likewise.
1210 * registry.c (register_data_with_cleanup): Likewise.
1211 * remote.c (remote_notif_stop_alloc_reply): Likewise.
1212 * ser-base.c (serial_ttystate): Likewise.
1213 * ser-mingw.c (make_pipe_state): Likewise.
1214 * ser-pipe.c (pipe_open): Likewise.
1215 * serial.c (serial_open): Likewise.
1216 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1217 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1218 (tui_alloc_win_info): Likewise.
1219 (tui_add_content_elements): Likewise.
1220 * tui/tui-file.c (tui_file_new): Likewise.
1221 * tui/tui-out.c (tui_out_new): Likewise.
1222 * ui-file.c (mem_file_new): Likewise.
1223 * ui-out.c (push_level): Likewise.
1224 (make_cleanup_ui_out_end): Likewise.
1225 (append_header_to_list): Likewise.
1226 (ui_out_new): Likewise.
1227 * user-regs.c (user_reg_add_builtin): Likewise.
1229 2014-01-13 Tom Tromey <tromey@redhat.com>
1231 * defs.h (XZALLOC): Remove.
1232 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1233 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1234 (get_ada_tasks_inferior_data): Likewise.
1235 * auto-load.c (get_auto_load_pspace_data): Likewise.
1236 * auxv.c (get_auxv_inferior_data): Likewise.
1237 * bfd-target.c (target_bfd_reopen): Likewise.
1238 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1239 (deprecated_insert_raw_breakpoint): Likewise.
1240 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1241 * corelow.c (core_open): Likewise.
1242 * darwin-nat.c (darwin_check_new_threads): Likewise.
1243 (darwin_attach_pid): Likewise.
1244 * dummy-frame.c (dummy_frame_push): Likewise.
1245 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1246 * dwarf2loc.c (allocate_piece_closure): Likewise.
1247 * elfread.c (elf_symfile_segments): Likewise.
1248 * eval.c (ptrmath_type_p): Likewise.
1249 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1250 * gdbtypes.c (alloc_type_arch): Likewise.
1251 (alloc_type_instance): Likewise.
1252 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1253 * inf-child.c (inf_child_can_use_agent): Likewise.
1254 * inflow.c (get_inflow_inferior_data): Likewise.
1255 * infrun.c (save_infcall_suspend_state): Likewise.
1256 * jit.c (jit_reader_load): Likewise.
1257 (get_jit_objfile_data): Likewise.
1258 (get_jit_program_space_data): Likewise.
1259 (jit_object_open_impl): Likewise.
1260 (jit_symtab_open_impl): Likewise.
1261 (jit_block_open_impl): Likewise.
1262 (jit_frame_sniffer): Likewise.
1263 * linux-fork.c (add_fork): Likewise.
1264 * maint.c (make_command_stats_cleanup): Likewise.
1265 * objfiles.c (get_objfile_pspace_data): Likewise.
1266 * opencl-lang.c (struct lval_closure): Likewise.
1267 * osdata.c (osdata_start_osdata): Likewise.
1268 * progspace.c (new_address_space): Likewise.
1269 (add_program_space): Likewise.
1270 * remote-sim.c (get_sim_inferior_data): Likewise.
1271 * sh-tdep.c (sh_gdbarch_init): Likewise.
1272 * skip.c (Ignore): Likewise.
1273 (skip_delete_command): Likewise.
1274 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1275 (library_list_start_library): Likewise.
1276 (solib_aix_current_sos): Likewise.
1277 * solib-darwin.c (get_darwin_info): Likewise.
1278 (darwin_current_sos): Likewise.
1279 * solib-dsbt.c (get_dsbt_info): Likewise.
1280 * solib-ia64-hpux.c (new_so_list): Likewise.
1281 (ia64_hpux_get_solib_linkage_addr): Likewise.
1282 * solib-spu.c (append_ocl_sos): Likewise.
1283 (spu_current_sos): Likewise.
1284 * solib-svr4.c (get_svr4_info): Likewise.
1285 (svr4_keep_data_in_core): Likewise.
1286 (library_list_start_library): Likewise.
1287 (svr4_default_sos): Likewise.
1288 (svr4_read_so_list): Likewise.
1289 * solib-target.c (library_list_start_library): Likewise.
1290 (solib_target_current_sos): Likewise.
1291 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1292 * symfile-debug.c (install_symfile_debug_logging): Likewise.
1293 * symfile.c (default_symfile_segments): Likewise.
1294 * target-descriptions.c (tdesc_data_init): Likewise.
1295 (tdesc_create_reg): Likewise.
1296 (struct tdesc_type *): Likewise.
1297 (tdesc_create_vector): Likewise.
1298 (tdesc_set_struct_size): Likewise.
1299 (struct tdesc_type *): Likewise.
1300 (tdesc_free_feature): Likewise.
1301 (tdesc_create_feature): Likewise.
1302 * windows-nat.c (windows_add_thread): Likewise.
1303 (windows_make_so): Likewise.
1304 * xml-support.c (gdb_xml_body_text): Likewise.
1305 (gdb_xml_create_parser_and_cleanup): Likewise.
1306 (xml_process_xincludes): Likewise.
1307 * xml-syscall.c (allocate_syscalls_info): Likewise.
1308 (syscall_create_syscall_desc): Likewise.
1310 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
1312 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1313 function, with code from i386_stap_parse_special_token.
1314 (i386_stap_parse_special_token_three_arg_disp): Likewise.
1315 (i386_stap_parse_special_token): Move code to the two functions
1318 2014-01-09 Pedro Alves <palves@redhat.com>
1319 Hui Zhu <hui@codesourcery.com>
1322 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1323 bp_err_string. Don't mark the location shlib_disabled if the
1324 error thrown wasn't a generic or memory error. Catch errors
1325 thrown while inserting breakpoints in overlayed code. Output
1326 error message of software breakpoints.
1327 * remote.c (remote_insert_breakpoint): If this breakpoint has
1328 target-side commands but this stub doesn't support Z0 packets,
1329 throw NOT_SUPPORTED_ERROR error.
1330 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1331 * target.h (target_insert_breakpoint): Extend comment.
1332 (target_insert_hw_breakpoint): Add comment.
1334 2014-01-08 Pedro Alves <palves@redhat.com>
1336 * remote.c (remote_add_thread): Add threads silently if starting
1338 (remote_notice_new_inferior): If in all-stop, and starting up,
1339 don't call notice_new_inferior.
1340 (get_current_thread): New function, factored out from ...
1341 (add_current_inferior_and_thread): ... this. Adjust.
1342 (remote_start_remote) <all-stop>: Fetch the thread list. If we
1343 found any thread, then select the remote's current thread as GDB's
1346 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1348 * NEWS: Create a new section for the next release branch.
1349 Rename the section of the current branch, now that it has
1352 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1354 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1355 * version.in: Bump version to 7.7.50.DATE-cvs.
1357 2014-01-08 Yao Qi <yao@codesourcery.com>
1359 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1360 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
1361 (spu_xfer_partial): Cast 'buf' to 'const char *'.
1363 2014-01-08 Yao Qi <yao@codesourcery.com>
1365 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1366 return value of bfd_get_filename to symbol_file_add_from_bfd.
1368 2014-01-08 Pierre Muller <muller@sourceware.org>
1371 * coff-pe-read.c (struct read_pe_section_data): Add index field.
1372 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1373 to prim_record_mininal_symbol_and_info.
1374 (add_pe_forwarded_sym): Use known section number of forwarded symbol
1375 in call to prim_record_minimal_symbol_and_info.
1376 (read_pe_exported_syms): Set index field of section_data.
1378 2014-01-07 Andrew Pinski <apinski@cavium.com>
1380 * features/aarch64-core.xml (cpsr): Change to be 64bit.
1381 * features/aarch64.c: Regenerate.
1383 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
1385 * target.c (return_null): Define.
1386 (update_current_target): Use it instead of return_zero for
1387 functions that return a pointer.
1389 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
1391 * source.c (add_path): Fix check for duplicated paths in the previously
1394 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
1396 * ada-lang.c: Remove duplicated include statements.
1397 * alphabsd-nat.c: Ditto.
1398 * amd64-darwin-tdep.c: Ditto.
1399 * amd64fbsd-nat.c: Ditto.
1400 * auto-load.c: Ditto.
1402 * breakpoint.c: Ditto.
1404 * fork-child.c: Ditto.
1405 * gdb_usleep.c: Ditto.
1406 * i386-darwin-tdep.c: Ditto.
1407 * i386fbsd-nat.c: Ditto.
1409 * inferior.c: Ditto.
1411 * linux-nat.c: Ditto.
1412 * linux-tdep.c: Ditto.
1413 * m68kbsd-nat.c: Ditto.
1414 * m68klinux-nat.c: Ditto.
1415 * microblaze-tdep.c: Ditto.
1416 * mips-linux-tdep.c: Ditto.
1417 * mn10300-tdep.c: Ditto.
1418 * nto-tdep.c: Ditto.
1419 * opencl-lang.c: Ditto.
1421 * printcmd.c: Ditto.
1422 * regcache.c: Ditto.
1423 * remote-m32r-sdi.c: Ditto.
1427 * tilegx-linux-nat.c: Ditto.
1428 * tilegx-tdep.c: Ditto.
1429 * tracepoint.c: Ditto.
1431 * vaxbsd-nat.c: Ditto.
1432 * windows-nat.c: Ditto.
1433 * xtensa-tdep.c: Ditto.
1435 2014-01-07 Yao Qi <yao@codesourcery.com>
1437 * spu-linux-nat.c (_initialize_spu_nat): Declare.
1439 2014-01-07 Yao Qi <yao@codesourcery.com>
1440 Joel Brobecker <brobecker@adacore.com>
1442 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1443 (pdc_write_regs): Likewise.
1444 (fetch_regs_kernel_thread): Likewise.
1445 (store_regs_kernel_thread): Likewise.
1447 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1449 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1450 tagged type objects to their actual type.
1452 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1454 * ada-valprint.c (print_field_values): Add "language" parameter.
1455 Update calls to print_field_values and print_variant_part.
1456 Pass new parameter "language" in call to val_print instead
1457 of "current_language". Replace call to ada_val_print by call
1459 (print_variant_part): Add "language" parameter.
1460 (ada_val_print_struct_union): Update call to print_field_values.
1462 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1464 * ada-valprint.c (ui_memcpy): Delete.
1465 (ada_print_floating): Update documentation. Add empty line
1466 between between function documentation and implementation.
1467 Delete variable "buffer". Use ui_file_xstrdup in place of
1468 ui_file_put. Minor adjustments following this change.
1470 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1472 * ada-valprint.c (ada_val_print_string): New function,
1473 extracted from ada_val_print_array.
1474 (ada_val_print_array): Replace extracted code by call
1475 to ada_val_print_string followed by a return. Move
1476 "else" branch to the function's top block.
1478 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1480 * ada-valprint.c (ada_val_print_array): Move implementation
1481 down. Rename parameter "offset" and "val" into "offset_aligned"
1482 and "original_value" respectively. Add parameter "offset".
1484 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1486 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1487 re-organizing the code. Change the "???" message printed
1488 when target type is a TYPE_CODE_UNDEF into
1489 "<ref to undefined type>".
1491 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1493 * ada-valprint.c (print_record): Delete, implementation inlined...
1494 (ada_val_print_struct_union): ... here. Remove call to
1495 ada_check_typedef in inlined implementation.
1497 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1499 * ada-valprint.c (ada_val_print_gnat_array): New function,
1500 extracted from ada_val_print_1;
1501 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1502 (ada_val_print_flt, ada_val_print_struct_union)
1503 (ada_val_print_ref): Likewise.
1504 (ada_val_print_1): Delete variables i and elttype.
1505 Replace extracted-out code by call to corresponding
1508 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1510 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1512 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1514 * ada-valprint.c (ada_val_print_1): Replace calls to
1515 ada_val_print_1 by calls to val_print.
1517 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1519 * ada-valprint.c (ada_val_print_1): Add parameter "language".
1520 Update calls to self accordingly. Replace calls to c_val_print
1521 by calls to val_print.
1523 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1525 * ada-valprint.c (print_record): Delete declaration.
1526 (adjust_type_signedness, ada_val_print_1): Likewise.
1527 (ada_val_print): Move function implementation down.
1528 (print_variant_part, print_field_values, print_record):
1529 Move function implementation up.
1531 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1533 * python/py-type.c (typy_get_name): New function.
1534 (type_object_getset): Add entry for attribute "name".
1535 * NEWS: Add entry mentioning this new attribute.
1537 2014-01-07 Yao Qi <yao@codesourcery.com>
1539 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1542 2014-01-07 Yao Qi <yao@codesourcery.com>
1544 * gnu-nat.c (info_port_rights): Add qualifier const to
1547 2014-01-07 Yao Qi <yao@codesourcery.com>
1549 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1551 2014-01-07 Yao Qi <yao@codesourcery.com>
1553 * gnu-nat.c (make_inf) Update declaration.
1554 (make_inf): Make it static.
1555 (inf_set_traced): Likewise.
1556 (inf_port_to_thread, inf_task_died_status): Likewise.
1558 2014-01-07 Yao Qi <yao@codesourcery.com>
1560 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1562 2014-01-07 Yao Qi <yao@codesourcery.com>
1564 * gnu-nat.c (_initialize_gnu_nat): Declare.
1566 2014-01-07 Yao Qi <yao@codesourcery.com>
1568 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1570 (struct gdbarch_info) <byte_order>: Change type to
1572 <byte_order_for_code>: Likewise.
1573 * gdbarch.c, gdbarch.h: Regenerated.
1575 2014-01-06 Sasha Smundak <asmundak@google.com>
1577 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1579 2014-01-06 Tom Tromey <tromey@redhat.com>
1581 * doublest.c (convert_doublest_to_floatformat): Use const, not
1583 * somread.c (som_symtab_read): Likewise.
1585 2014-01-07 Hui Zhu <hui@codesourcery.com>
1587 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1588 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1589 (gdb_bfd_fopen): Ditto.
1590 (gdb_bfd_openr): Ditto.
1591 (gdb_bfd_openw): Ditto.
1592 (gdb_bfd_openr_iovec): Ditto.
1593 (gdb_bfd_fdopenr): Ditto.
1594 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1595 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1597 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1599 * symfile-mem.c (symbol_file_add_from_memory): Removed
1600 gdb_bfd_stash_filename.
1602 2014-01-03 Doug Evans <dje@google.com>
1604 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1607 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1609 Update year range in copyright notice of all files.
1611 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1613 * top.c (print_gdb_version): Set copyright year to 2014.
1615 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1617 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1619 For older changes see ChangeLog-2013.
1625 version-control: never