1 2008-03-13 Vladimir Prus <vladimir@codesourcery.com>
2 Daniel Jacobowitz <dan@codesourcery.com>
4 * breakpoint.h (breakpoint_restore_shadows): New
6 * breakpoint.c (breakpoint_restore_shadows): New.
7 (read_memory_nobpt): Delete.
8 * gdbcore.h (read_memory_nobpt): Delete declaration.
9 * target.c (memory_xfer_partial): Call
10 breakpoint_restore_shadows.
11 (restore_show_memory_breakpoints)
12 (make_show_memory_beakpoints_cleanup): New.
13 (show_memory_breakpoints): New.
14 * target.h (make_show_memory_beakpoints_cleanup): Declare.
15 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint):
16 Make sure we see memory breakpoints when checking if
17 breakpoint is still there.
18 * alpha-tdep.c, alphanbsd-tdep.c, frame.c, frv-tdep.c,
19 hppa-linux-tdep.c, hppa-tdep.c, i386-linux-nat.c, i386-tdep.c,
20 m68klinux-tdep.c, mips-tdep.c, mn10300-tdep.c, s390-tdep.c,
21 sparc-tdep.c: Use target_read_memory instead of read_memory_nobpt.
23 2008-03-12 Pedro Alves <pedro@codesourcery.com>
25 * thread.c (add_thread): Use printf_unfiltered to print.
27 2008-03-12 Joel Brobecker <brobecker@gnat.com>
29 * sol-thread.c: Replace use of TM_I386SOL2_H by an expression
30 that is true only on x86-solaris and x86_64-solaris.
31 * procfs.c: Likewise. Move procfs_find_LDT_entry up together
32 with proc_get_LDT_entry.
34 2008-03-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
36 * configure.ac (AC_CHECK_FUNCS): Add check for setsid.
37 * config.in, configure: Regenerate.
38 * fork-child.c (fork_inferior): Call create_tty_session.
39 * inflow.c (new_tty): Set controlling terminal with TIOCSCTTY.
40 (create_tty_session): New function.
41 * terminal.h: Declare create_tty_session.
43 2008-03-12 Alan Modra <amodra@bigpond.net.au>
46 * elfread.c (elf_symtab_read): Make shndx an unsigned int.
47 * mipsread.c: Include elf/internal.h.
48 (read_alphacoff_dynamic_symtab): Map external reserved sym_shndx
51 2008-03-11 Markus Deuling <deuling@de.ibm.com>
53 * win32-nat.c (do_win32_fetch_inferior_registers): Use get_regcache_arch
54 to get at the current architecture and at the target specific vector.
55 Add target specific vector to I387_FISEG_REGNUM and I387_FOP_REGNUM and
56 remove define of I387_ST0_REGNUM.
58 * amd64-tdep.c (I387_ST0_REGNUM): Remove define.
60 (amd64_supply_fxsave, amd64_collect_fxsave): Use get_regcache_arch to
61 get at the current architecture
62 (I387_FISEG_REGNUM, I387_FOSEG_REGNUM): Add target specific vector as
65 * i386-tdep.c: Remove various define's and undef's of I387_ST0_REGNUM,
66 I387_NUM_XMM_REGS and I387_MM0_REGNUM.
68 (I387_NUM_XMM_REGS, I387_XMM0_REGNUM, I387_MXCSR_REGNUM,
69 I387_ST0_REGNUM, I387_FCTRL_REGNUM, I387_MM0_REGNUM,
70 (I387_FSTAT_REGNUM): Add target specific vector as parameter.
72 (i386_register_name, i386_dbx_reg_to_regnum): Use gdbarch_tdep to get
73 at the target specific vector.
75 (i386_get_longjmp_target): Use get_frame_arch to get at the current
76 architecture. Use gdbarch_tdep to get at the target specific vector.
78 (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as parameter and
79 update caller. Use gdbarch_tdep to get at the target specific vector.
81 (i386_register_to_value: Use get_frame_arch to get at the current
84 * i386-tdep.h (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as
87 * i387-tdep.c (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
88 I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM
89 I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_ST0_REGNUM, FSAVE_ADDR,
90 FXSAVE_ADDR, I387_XMM0_REGNUM): Add target specific vector as parameter.
92 (I387_ST0_REGNUM, I387_NUM_XMM_REGS): Remove various define's and
95 (i387_convert_register_p, i387_register_to_value,
96 i387_value_to_register): Update call for i386_fp_regnum_p.
98 * i387-tdep.h: Remove comment.
99 (I387_ST0_REGNUM, I387_NUM_XMM_REGS, I387_MM0_REGNUM): Add define.
100 (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
101 I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM,
102 I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_XMM0_REGNUM,
103 I387_MXCSR_REGNUM): Add target specific vector as parameter.
105 2008-03-10 Daniel Jacobowitz <dan@codesourcery.com>
107 * Makefile.in (fork-child.o): Update.
108 * NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
109 argument. Gather all gdbserver features together.
110 * fork-child.c (exec_wrapper): New variable.
111 (fork_inferior): Use it.
112 (startup_inferior): Skip an extra trap if using "set exec-wrapper".
113 (unset_exec_wrapper_command, _initialize_fork_child): New.
115 2008-03-10 Hidetaka Takano <hidetaka.takano@glb.toshiba.co.jp>
117 * source.c (directory_command): Modify the determination of
118 condition of terminal "from_tty".
120 2008-03-10 Matt Rice <ratmice@gmail.com>
122 * dwarf2read.c (set_cu_language): Add DW_LANG_ObjC.
124 2008-03-10 Hidetaka Takano <hidetaka.takano@glb.toshiba.co.jp>
126 * spu-tdep.c (info_spu_event_command): Insert a '\0' to the end
127 of the data passing to strtoulst function.
128 (info_spu_signal_command): Likewise.
130 2008-03-08 Vladimir Prus <vladimir@codesourcery.com>
132 * mi/mi-interp.c (mi_command_loop): Remove
135 2008-03-07 Joel Brobecker <brobecker@adacore.com>
137 * remote.c (extended_remote_attach_1): Make local variable pid an int
140 2008-03-07 Joel Brobecker <brobecker@adacore.com>
142 * solib-svr4.c (svr4_same_1): New function, originally extracted
143 from svr4_same and expanded to handle the sparc64 case.
144 (svr4_same): Move up and reimplement using svr4_same_1.
145 (enable_break): Use svr4_same_1 to do shared library name comparisons.
147 2008-03-07 Ramana Radhakrishnan <ramana.r@gmail.com>
149 * MAINTAINERS: Move self to Paper trail.
151 2008-03-05 Daniel Jacobowitz <dan@codesourcery.com>
153 * Makefile.in (mingw-hdep.o, posix-hdep.o, remote-fileio.o): Update.
154 * event-loop.c (call_async_signal_handler): New.
155 * event-loop.h (call_async_signal_handler)
156 (gdb_call_async_signal_handler): Declare.
157 (mark_async_signal_handler): Add comments.
158 * event-top.c (handle_sigint): Use gdb_call_async_signal_handler.
159 * mingw-hdep.c (sigint_event, sigint_handler): New.
160 (gdb_select): Use them. Wait for the readline signal handler
162 (gdb_call_async_signal_handler, _initialize_mingw_hdep): New functions.
163 * posix-hdep.c (gdb_call_async_signal_handler): New function.
164 * remote-fileio.c (sigint_fileio_token, async_remote_fileio_interrupt):
166 (remote_fileio_ctrl_c_signal_handler): Use
167 gdb_call_async_signal_handler.
168 (initialize_remote_fileio): Initialize sigint_fileio_token.
169 * remote.c (initialize_sigint_signal_handler, handle_remote_sigint): Do
170 not initialize tokens here.
171 (handle_remote_sigint_twice): Likewise. Reinstall
172 handle_remote_sigint.
173 (async_remote_interrupt_twice): Just call interrupt_query.
174 (cleanup_sigint_signal_handler): Do not delete tokens.
175 (remote_interrupt, remote_interrupt_twice): Use
176 gdb_call_async_signal_handler.
177 (interrupt_query): Reinstall the default signal handler.
178 (_initialize_remote): Initialize tokens here.
180 2008-03-04 Joel Brobecker <brobecker@adacore.com>
182 * features/rs6000/power-core.xml, features/rs6000/power64-core.xml,
183 features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
184 Change the type of the lr register to code_ptr.
185 * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
186 features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
187 features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
188 features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
189 features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
190 features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
191 features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: Regenerate.
193 2008-03-03 James E. Wilson <wilson@tuliptree.org>
195 * MAINTAINERS: Update my email address.
197 2008-03-03 Keith Seitz <keiths@redhat.com>
199 From Dave Murphy <davem@devkitpro.org>:
200 * configure.ac: Set tcl configdir to win under mingw.
201 * configure: Regenerate.
203 2008-03-03 Daniel Jacobowitz <dan@codesourcery.com>
205 * breakpoint.c (fetch_watchpoint_value): New function.
206 (update_watchpoint): Set and clear val_valid. Use
207 fetch_watchpoint_value. Handle unreadable values on the
208 value chain. Correct check for user-requested array watchpoints.
209 (breakpoint_init_inferior): Clear val_valid.
210 (watchpoint_value_print): New function.
211 (print_it_typical): Use it. Do not free or clear old_val. Print
212 watchpoints even if old_val == NULL.
213 (watchpoint_check): Use fetch_watchpoint_value. Check for values
214 becoming readable or unreadable.
215 (watch_command_1): Use fetch_watchpoint_value. Set val_valid.
216 (do_enable_watchpoint): Likewise.
217 * breakpoint.h (struct breakpoint): Update comment for val. Add
219 * NEWS: Mention watchpoints on inaccessible memory.
221 2007-02-29 Daniel Jacobowitz <dan@codesourcery.com>
223 * Makefile.in (i386-nat.o): Update.
224 * amd64-linux-nat.c (_initialize_amd64_linux_nat): Call
225 i386_use_watchpoints.
226 * i386-linux-nat.c (_initialize_i386_linux_nat): Call
227 i386_use_watchpoints.
228 * i386-nat.c (i386_stopped_data_address): Take two arguments.
229 (i386_stopped_by_watchpoint): Update call.
230 (i386_can_use_hw_breakpoint, i386_use_watchpoints): New.
231 * config/i386/nm-i386.h: Conditionalize definitions on
232 ! I386_WATCHPOINTS_IN_TARGET_VECTOR.
233 (i386_use_watchpoints): Declare.
234 (i386_stopped_data_address): Update.
235 * config/i386/nm-linux.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
236 * config/i386/nm-linux64.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
238 2008-02-29 Joel Brobecker <brobecker@adacore.com>
240 GDB 6.8 branch created (branch timestamp: 2008-02-26 10:00 UTC)
241 * version.in: Bump version to 6.8.50.20080229-cvs.
243 2008-02-28 Markus Deuling <deuling@de.ibm.com>
245 * f-typeprint.c (f_print_type): Handle NULL pointer in VARSTRING
248 2008-02-28 Tom Tromey <tromey@redhat.com>
250 * infcmd.c (notice_args_read): Print result of get_inferior_args.
252 2008-02-28 Daniel Jacobowitz <dan@codesourcery.com>
254 * infcmd.c (kill_if_already_running): Make static. Use
255 target_require_runnable.
256 * target.c (target_require_runnable): New.
257 * target.h (target_require_runnable): Declare.
259 2008-02-28 Daniel Jacobowitz <dan@codesourcery.com>
261 * frame.c (reinit_frame_cache): Only annotate if frames were
264 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
266 * regformats/reg-ppc.dat: Rename "ps" to "msr".
267 * regformats/reg-ppc64.dat: Likewise.
269 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
271 * features/Makefile (%.dat): Emit xmltarget statement.
273 * regformats/regdat.sh: Support xmltarget and xmlarch statments.
274 Generate code to set gdbserver_xmltarget in init_registers_${name}.
276 * regformats/arm-with-iwmmxt.dat: Regenerate.
277 * regformats/mips64-linux.dat: Regenerate.
278 * regformats/mips-linux.dat: Regenerate.
279 * regformats/rs6000/powerpc-32.dat: Regenerate.
280 * regformats/rs6000/powerpc-64.dat: Regenerate.
281 * regformats/rs6000/powerpc-e500.dat: Regenerate.
283 * regformats/reg-arm.dat: Add xmlarch statement.
284 * regformats/reg-i386.dat: Likewise.
285 * regformats/reg-i386-linux.dat: Likewise.
286 * regformats/reg-x86-64-linux.dat: Likewise.
287 * regformats/reg-spu.dat: Likewise.
289 2008-02-27 Daniel Jacobowitz <dan@codesourcery.com>
291 * remote.c (remote_wait, remote_async_wait): Stop if we receive
294 2008-02-27 Daniel Jacobowitz <dan@codesourcery.com>
296 * utils.c (debug_timestamp): New.
297 (vfprintf_unfiltered): Print timestamps if requested.
298 (show_debug_timestamp): New.
299 (initialize_utils): Register "set debug timestamp".
300 * NEWS: Mention "set debug timestamp". Add GDB 6.8 section.
302 2008-02-27 Joel Brobecker <brobecker@adacore.com>
304 * breakpoint.c (skip_prologue_sal): New function.
305 (resolve_sal_pc): Adjust SAL past prologue if the SAL was
306 computed from a line number.
308 2008-02-27 Joel Brobecker <brobecker@adacore.com>
310 * features/rs6000/power-core.xml, features/rs6000/power64-core.xml
311 features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
312 Set PC register type to "code_ptr".
313 * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
314 features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
315 features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
316 features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
317 features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
318 features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
319 features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c:
322 2008-02-27 Ulrich Weigand <uweigand@de.ibm.com>
324 * regformats/regdat.sh: Rename init_registers function in
325 generated file to init_registers_${name}.
327 * regformats/reg-crisv32.dat: Set "name" to crisv32.
328 * regformats/reg-ppc64.dat: Set "name" to ppc64.
329 * regformats/reg-s390x.dat: Set "name" to s390x.
331 2008-02-26 Greg Law <glaw@undo-software.com>
333 * regcache.c (registers_changed): Call reinit_frame_cache.
335 2008-02-26 Daniel Jacobowitz <dan@codesourcery.com>
337 * configure.tgt (sh-*-linux*): Match sh*. Add glibc-tdep.o.
338 * sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver
339 and svr4_fetch_objfile_link_map.
340 * Makefile.in (sh-linux-tdep.o): Update.
342 2008-02-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
344 * amd64-tdep.c (amd64_classify): Add support for decimal float
346 * i386-tdep.c (i386_return_value): Make 128-bit decimal float
347 use the struct return convention.
349 2008-02-26 Nick Roberts <nickrob@snap.net.nz>
351 * breakpoint.c (print_one_breakpoint_location): Revert Enb field
352 to old format. Discard breakpoint address if shared library is
354 (breakpoint_1): Adjust formatting of table header accordingly.
356 2008-02-25 Vladimir Prus <vladimir@codesourcery.com>
358 * remote.c (remote_get_threadlist): If the response
359 is empty, don't try to parse it.
361 2008-02-23 Vladimir Prus <vladimir@codesourcery.com>
363 Unbreak 'target async'.
364 * serial.c (serial_async): Set the
365 handler function before enabling async
368 2008-02-22 Daniel Jacobowitz <dan@codesourcery.com>
370 * solib-svr4.c (enable_break): Convert r_brk to a code address.
372 2008-02-21 Pedro Alves <pedro@codesourcery.com>
374 * remote.c (extended_remote_attach_1): Set attach_flag.
375 (extended_remote_create_inferior_1): Clear attach_flag.
377 2008-02-20 Daniel Jacobowitz <dan@codesourcery.com>
379 * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Set
381 (mipsnbsd_lp64_fetch_link_map_offsets): Likewise.
382 * solib-svr4.c (solib_svr4_r_brk): New.
383 (open_symbol_file_object, svr4_current_sos): Always check the
385 (svr4_fetch_objfile_link_map): Do not set debug_base.
386 (enable_break): Use r_brk if it is set.
387 (svr4_ilp32_fetch_link_map_offsets): Set r_brk_offset.
388 (svr4_lp64_fetch_link_map_offsets): Likewise.
389 * solib-svr4.h (struct link_map_offsets): Add r_brk_offset.
391 2008-02-20 Markus Deuling <deuling@de.ibm.com>
392 Mark Kettenis <kettenis@gnu.org>
394 * alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by
395 trad_frame_saved_reg.
396 (trad-frame.h): New include.
398 (alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs
399 instead of frame_obstack_zalloc.
400 (alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register.
402 * Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h.
404 2008-02-20 Markus Deuling <deuling@de.ibm.com>
406 * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess
407 from disassemble_info instead of gdbarch_byte_order.
409 * mips-tdep.c (gdb_print_insn_mips): Likewise.
410 * arm-tdep.c (gdb_print_insn_arm): Likewise.
412 2008-02-20 Markus Deuling <deuling@de.ibm.com>
414 * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add
415 gdbarch as parameter.
417 * gdbarch.{c,h}: Regenerate.
419 * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as
421 * mem-break.c (default_memory_insert_breakpoint)
422 (default_memory_remove_breakpoint): Likewise.
423 * target.h (default_memory_remove_breakpoint)
424 (default_memory_insert_breakpoint): Likewise.
426 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as
427 parameter. Replace current_gdbarch by gdbarch.
428 * m32r-tdep.c (m32r_memory_insert_breakpoint)
429 (m32r_memory_remove_breakpoint): Likewise.
431 2008-02-19 Daniel Jacobowitz <dan@codesourcery.com>
433 * MAINTAINERS: Add Vladimir Prus as MI maintainer.
435 2008-02-19 Joel Brobecker <brobecker@adacore.com>
437 * NEWS: Add entry describing Add support improvements.
439 2008-02-18 Markus Deuling <deuling@de.ibm.com>
441 * m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by
444 2008-02-18 Markus Deuling <deuling@de.ibm.com>
446 * sentinel-frame.c (sentinel_frame_prev_register): Do not call
447 register_offset_hack anymore.
449 * regcache.{c,h} (register_offset_hack): Remove.
451 2008-02-18 Markus Deuling <deuling@de.ibm.com>
453 * hppa-tdep.h (find_global_pointer): Add gdbarch as parameter.
455 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace
456 current_gdbarch by gdbarch.
457 (hppa64_hpux_find_global_pointer): Likewise.
458 * hppa-tdep.c (hppa_find_global_pointer): Likewise.
459 (hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for
462 * hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as
464 * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
466 * hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead
469 * hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and
470 replace current_gdbarch by gdbarch.
471 (hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr.
473 2008-02-18 Markus Deuling <deuling@de.ibm.com>
475 * rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter
476 and replace current_gdbarch by gdbarch.
478 (store_register): Update call for exec_one_dummy_insn.
479 (fetch_register, store_register): Update call of regmap.
481 * ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as
482 parameter and replace current_gdbarch by gdbarch.
484 (ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at
485 the current architecture. Update call for getregs_supplies and
487 (ppcnbsd_fetch_inferior_registers): Likewise.
489 * ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and
490 replace current_gdbarch by gdbarch.
491 (ppcobsd_fetch_registers, ppcobsd_store_registers): Use
492 get_regcache_arch to get at the current architecture. Update call for
495 2008-02-18 Markus Deuling <deuling@de.ibm.com>
497 * arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch
500 2008-02-15 Markus Deuling <deuling@de.ibm.com>
502 * mips-linux-tdep.c (mips_linux_init_abi): Remove internal error.
504 2008-02-14 Vladimir Prus <vladimir@codesourcery.com>
506 * NEWS: Mention pending breakpints in MI.
508 2008-02-14 Markus Deuling <deuling@de.ibm.com>
510 * Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o.
512 2008-02-13 Markus Deuling <deuling@de.ibm.com>
514 Add script to build and test GDB using enable-targets=all.
516 * gdb_buildall.sh: New file.
518 2008-02-11 Maxim Grigoriev <maxim2405@gmail.com>
520 * NEWS (New native configurations): Xtensa GNU/Linux.
521 (New targets): Xtensa GNU/Linux.
522 * Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
524 (ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
525 (xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
526 * configure.tgt (xtensa*-*-linux*): New entry.
527 * xtensa-config.c (xtensa_tdep): New variable.
528 (xtensa_config_byte_order, xtensa_config_tdep): Removed.
529 (rmap): Change format based on new macro XTREG.
530 (XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
531 * xtensa-linux-nat.c: New.
532 * xtensa-linux-tdep.c: New.
533 * xtensa-xtregs.c: New.
534 * xtensa-tdep.h (xtensa_elf_gregset_t): Update.
535 (XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
536 (XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
537 (xtensa_register_t): New field coprocessor.
538 (XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
539 * xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
540 (xtensa_pseudo_register_read, xtensa_pseudo_register_write):
541 Update to handle privileged registers.
542 (xtensa_supply_gregset) Remove exccause and excvaddr registers.
543 (xtensa_push_dummy_call): Set windowstart register correctly.
544 (call0_analyze_prologue): Initialize xtensa_default_isa.
545 (xtensa_derive_tdep): New.
546 (xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
547 xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
548 Call xtensa_derive_tdep().
549 * config/xtensa/linux.mh: New.
550 * regformats/reg-xtensa.dat: New.
552 2008-02-09 Aleksandar Ristovski <aristovski@qnx.com> (tiny change)
554 * corelow.c (core_open): Use IS_ABSOLUTE_PATH.
555 (filenames.h): New include.
556 * Makefile.in (corelow.o): Add dependency for filenames.h.
558 2008-02-08 Doug Evans <dje@google.com>
560 * source.c (find_and_open_source): Always rewrite absolute filenames.
562 2008-02-07 Doug Evans <dje@google.com>
564 * breakpoint.c: #include "hashtab.h".
565 (ambiguous_names_p): New fn.
566 (update_breakpoint_locations): When restoring bp enable status, don't
567 compare function names if any functions have same name.
568 * Makefile.in (breakpoint.o): Add hashtab.h dependency.
570 2008-02-07 Joel Brobecker <brobecker@adacore.com>
572 * ada-lang.c (symbol_completion_add): Make SV parameter a VEC**
573 instead of just a VEC*. Update use of SV.
574 (ada_make_symbol_completion_list): Update symbol_completion_add calls.
576 2007-02-07 Joel Brobecker <brobecker@adacore.com>
578 * NEWS: Put all new commands since gdb-6.7 together.
580 2007-02-07 Joel Brobecker <brobecker@adacore.com>
582 * ada-lang.c: #include "vec.h".
583 (struct string_vector, new_string_vector, string_vector_append):
585 (char_ptr): New typedef.
586 (DEF_VEC_P (char_ptr)): New VEC type.
587 (symbol_completion_add): Update profile to take the new VEC type
588 instead of the old string_vector structure. Update code accordingly.
589 (ada_make_symbol_completion_list): Use the new VEC type instead of
590 the old string_vector structure, and update the code accordingly.
591 * Makefile.in (ada-lang.o): Add dependency on vec.h.
593 2008-02-06 Pierre Muller <muller@ics.u-strasbg.fr>
595 * p-exp.y: Set current_type in missing places.
596 (leftdiv_is_integer): New static variable.
597 Typecast right operand of BINOP_DIV to long_double if both operands
600 2008-02-06 Maciej W. Rozycki <macro@mips.com>
602 * remote-mips.c (set_breakpoint): Rename to...
603 (mips_set_breakpoint): ... this.
604 (clear_breakpoint): Rename to...
605 (mips_clear_breakpoint): ... this.
606 (common_breakpoint): Rename to...
607 (mips_common_breakpoint): ... this.
608 (check_lsi_error): Rename to...
609 (mips_check_lsi_error): ... this.
611 2007-02-05 Joel Brobecker <brobecker@adacore.com>
613 * language.h (struct language_defn): Add new field
614 la_make_symbol_completion_list.
615 * symtab.c (default_make_symbol_completion_list): Renames
616 make_symbol_completion_list.
617 (make_symbol_completion_list): New function.
618 * symtab.h (default_make_symbol_completion_list): Add declaration.
619 * langauge.c (unknown_language): Set la_make_symbol_completion_list.
620 (auto_language, local_language): Likewise.
621 * objc-lang.c (objc_language_defn): Likewise.
622 * scm-lang.c (scm_language_defn): Likewise.
623 * m2-lang.c (m2_language_defn): Likewise.
624 * f-lang.c (f_language_defn): Likewise.
625 * jv-lang.c (java_language_defn): Likewise.
626 * p-lang.c (pascal_language_defn): Likewise.
627 * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn)
628 (minimal_language_defn): Likewise.
629 * ada-lang.c (struct string_vector): New structure.
630 (new_string_vector, string_vector_append, ada_unqualified_name)
631 (add_angle_brackets, symbol_completion_match, symbol_completion_add)
632 (ada_make_symbol_completion_list): New functions.
633 (ada_language_defn): Set la_make_symbol_completion_list.
634 * ada-lang.h (ada_make_symbol_completion_list): Remove declaration,
635 this function is static.
637 2008-02-05 Kevin Buettner <kevinb@redhat.com>
639 * mn10300-tdep.c (mn10300_push_dummy_call): Adjust stack pointer
640 to account for call site optimizations.
642 2008-02-05 Andrzej Zaborowski <balrogg@gmail.com>
644 * tracepoint.c (read_actions): Handle end-of-text indicator
645 in action list properly. (Committed by Jim Blandy)
647 2008-02-05 Jim Blandy <jimb@red-bean.com>
649 * ax-gdb.c (gen_expr): Yield ordinary error if asked to trace a
650 pseudoregister, not an internal error.
651 Reported by: Andrzej Zaborowski
653 2008-02-04 Vladimir Prus <vladimir@codesourcery.com>
655 * varobj.c (c_value_of_variable): Use xstrdup.
657 2008-02-04 Vladimir Prus <vladimir@codesourcery.com>
659 Update stored rendition of varobj value when format changes.
660 * varobj.c (varobj_set_display_format): Recomputed
662 (c_value_of_variable): Return print_value.
664 2008-02-03 Doug Evans <dje@google.com>
666 * eval.c (evaluate_subexp_standard): Fix type of result of mixed
667 integer/float division operations when EVAL_AVOID_SIDE_EFFECTS.
668 * valops.c (value_one): New function.
669 * value.h (value_one): Declare.
671 Fix argument promotion for binary arithmetic ops for C.
672 * valarith.c (unop_result_type): New fn.
673 (binop_result_type): New fn.
674 (value_binop): Move result type computation to binop_result_type.
675 (value_pos, value_neg, value_complement): Move result type
676 computation to unop_result_type.
679 * gdbtypes.c (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
680 Return basetype, fieldno if found. All callers updated.
681 Don't cache TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE if from different
683 * gdbtypes.h (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
684 * symfile.h (fill_in_vptr_fieldno): Delete.
686 2008-02-02 Doug Evans <dje@google.com>
688 * valarith.c (value_binop): Handle unsigned BINOP_REM division by zero.
690 * typeprint.c (*): Whitespace cleanup.
692 2008-02-02 Mark Kettenis <kettenis@gnu.org>
693 Luis Machado <luisgpm@br.ibm.com>
694 Thiago Jung Bauermann <bauerman@br.ibm.com>
696 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that
697 don't fit into registerson the stack the way GCC does.
699 2008-02-01 Joel Brobecker <brobecker@adacore.com>
701 * symtab.c (symbol_set_names): Do not add an entry in the demangling
702 hash table for Ada symbols. Just store the linkage name as is,
703 and leave the demangled_name as NULL.
705 2007-02-01 Joel Brobecker <brobecker@adacore.com>
707 * dwarf2read.c (add_partial_symbol): Always store all Ada subprograms
709 (new_symbol): Likewise.
711 2008-02-01 Vladimir Prus <vladimir@codesourcery.com>
713 * breakpoint.c (break_command_1): Return void.
714 (break_command_really): Return void. Rethrow
715 exceptions instead of returning.
716 (gdb_breakpoint): Remove the error_message parameter.
717 Return void. Rename to set_breakpoint.
718 * gdb.h (gdb_breakpoint): Rename and move to...
719 * breakpoint.h (set_breakpoint): ...here.
720 * mi/mi-cmb-break.c (mi_cmd_break_insert): Restore
721 event hooks even if exception is thrown. Adjust to
722 gdb_breakpoint interface changes.
725 2008-02-01 Thiago Jung Bauermann <bauerman@br.ibm.com>
727 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Write 32-bit
728 float in both first and second word in the doubleword, to support
731 2008-02-01 Vladimir Prus <vladimir@codesourcery.com>
733 Properly rethrow exception. This fixes errors
734 about non-existent functions for -break-insert.
735 * breakpoint.c (break_command_really): Use throw_exception
736 for rethrowing. If rethrowing, don't print the exception.
738 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
740 * NEWS: Mention Decimal Floating Point support.
742 2008-01-31 Joel Brobecker <brobecker@adacore.com>
744 * std-regs.c (value_of_builtin_frame_pc_reg): Change the returned
745 value type to builtin_type_void_func_ptr.
747 2008-01-31 Andreas Krebbel <krebbel1@de.ibm.com>
749 * s390-tdep.c (is_float_singleton, is_float_like,
750 alignment_of, s390_return_value): Make checks for
751 TYPE_CODE_FLT to match TYPE_CODE_DECFLOAT as well.
753 2008-01-31 Luis Machado <luisgpm@br.ibm.com>
754 Thiago Jung Bauermann <bauerman@br.ibm.com>
756 * infcmd.c (default_print_registers_info): Also print hex
757 raw contents for TYPE_CODE_DECFLOAT registers.
758 * ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member.
759 * rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro.
760 (rs6000_register_name): Add support for DFP pseudo-registers.
761 (rs6000_pseudo_register_type): Likewise.
762 rs6000_pseudo_register_reggroup_p): Likewise.
763 (ppc_pseudo_register_read): New function.
764 (ppc_pseudo_register_write): Likewise.
765 (rs6000_pseudo_register_read): Likewise.
766 (rs6000_pseudo_register_write): Likewise.
767 (e500_pseudo_register_read): Move checks to
768 rs6000_pseudo_register_read.
769 (e500_pseudo_register_write): Move checks to
770 rs6000_pseudo_register_write.
771 (rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum. Install
772 rs6000_pseudo_register_read and rs6000_pseudo_register_write
773 in gdbarch if SPE or DFP is available. Adjust gdbarch's
774 num_pseudo_regs to account for DFP pseudo regs.
776 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
778 * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_ev31_regnum member.
779 * rs6000-tdep.c (IS_SPE_PSEUDOREG): New macro.
780 (spe_register_p, rs6000_register_name, rs6000_pseudo_register_type,
781 rs6000_pseudo_register_reggroup_p, e500_move_ev_register,
782 e500_pseudo_register_read, e500_pseudo_register_write): Use
783 IS_SPE_PSEUDOREG macro.
784 (rs6000_frame_cache): Remove use of tdep->ppc_ev31_regnum.
785 (rs6000_gdbarch_init): Remove unnecessary num_sprs local variable.
786 Remove initialization of tdep->ppc_ev31_regnum.
788 2008-01-08 Paul Hilfinger <hilfinger@adacore.com>
790 * printcmd.c (print_formatted): Handle references as for unformatted
793 2008-01-30 Joel Brobecker <brobecker@adacore.com>
795 * eval.c (evaluate_subexp_standard): Add handling of user
796 registers when in EVAL_AVOID_SIDE_EFFECTS mode.
798 2008-01-30 Pierre Muller <muller@ics.u-strasbg.fr>
800 * eval.c (evaluate_subexp_standard): Support
803 2008-01-30 Paul N. Hilfinger <hilfinger@adacore.com>
805 * valarith.c (value_binop): Add floating-point BINOP_MIN and
807 For BINOP_EXP, use length and signedness of left operand only for
808 result, as for shifts.
809 For integral operands to BINOP_EXP, use new integer_pow and
810 uinteger_pow functions so as to get full range of results.
811 (integer_pow): New function.
812 (uinteger_pow): New function.
814 2008-01-30 Vladimir Prus <vladimir@codesourcery.com>
816 Use vector for varobj_list_children interface.
817 * gdb/varobj.c (varobj_list_children): Return vector
819 * gdb/varobj.h (varobj_list_children): Adjust
821 (varobj_p): Declare. Declare vector thereof.
822 * mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust
823 for varobj_list_children change.
824 * Makefile.in (varobj_h): Update dependencies.
826 2008-01-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
828 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Add support for
829 TYPE_CODE_DECFLOAT arguments.
830 (ppc64_sysv_abi_push_dummy_call) Likewise.
831 (get_decimal_float_return_value): New function.
832 (do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return
833 values by calling get_decimal_float_return_value.
834 (ppc64_sysv_abi_return_value): Likewise.
836 2008-01-30 Nick Roberts <nickrob@snap.net.nz>
838 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Add field
839 for preprocessor macro information. Formatting changes.
841 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com>
843 * remote.c (struct remote_state): Add cached_wait_status.
844 (remote_exec_file): New variable.
845 (PACKET_vAttach, PACKET_vRun): New constants.
846 (extended_remote_restart): Do not query for status.
847 (struct start_remote_args): New.
848 (remote_start_remote): Take it as a second argument. Check
849 whether the target is running. Issue an error for non-running
850 non-extended targets. Cache the wait status. Set inferior_ptid
852 (remote_open_1): Prompt to disconnect non-running targets. Make
853 sure the target is marked running. Do not set inferior_ptid here.
854 Update call to remote_start_remote. Do not call remote_check_symbols
855 if the target is not running.
856 (remote_detach_1): Rename from remote_detach. Take an EXTENDED
857 argument. Handle a non-running target.
858 (remote_detach): Use it.
859 (extended_remote_detach): New.
860 (remote_disconnect): Fix typo. Use remoute_mourn_1.
861 (extended_remote_attach_1, extended_remote_attach)
862 (extended_async_remote_attach): New.
863 (remote_vcont_resume): Remove unused variable.
864 (remote_wait, remote_async_wait): Use any cached wait status.
865 (putpkt_binary, getpkt): Clear any cached wait status.
866 (extended_remoute_mourn_1): New.
867 (extended_remote_mourn): Use it.
868 (extended_async_remote_mourn, extended_remote_run): New.
869 (extended_remote_create_inferior_1): New.
870 (extended_remote_create_inferior): Use it.
871 (extended_remote_async_create_inferior): Likewise.
872 (remote_xfer_partial): Skip for non-executing targets.
873 (init_extended_remote_ops): Set to_detach and to_attach.
874 (init_extended_async_remote_ops): Likewise. Use
875 extended_async_remote_mourn.
876 (_initialize_remote): Register vAttach, vRun, and
877 set remote exec-file.
878 * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
880 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com>
882 * Makefile.in (symfile.o): Update.
883 * NEWS: Mention exec tracing support.
884 * inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
886 * infcmd.c (kill_if_already_running, detach_command)
887 (disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
888 * infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
889 (follow_exec): Do not check may_follow_exec. Do not mourn and push
890 targets. Apply the sysroot path to the loaded executable. Use
892 * linux-nat.c (linux_child_follow_fork): Print fork following
894 (kill_wait_callback): Kill again before waiting a second time.
895 * symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
898 2008-01-29 Joel Brobecker <brobecker@adacore.com>
900 * amd64-tdep.c (amd64_classify): Add handling of TYPE_CODE_CHAR.
902 2008-01-29 Joel Brobecker <brobecker@adacore.com>
904 * nto-tdep.h: Remove #include "defs.h".
905 * nto-tdep.c: Add #include "defs.h".
906 * Makefile.in (nto_tdep_h): Update dependencies.
907 (nto-tdep.o): Likewise.
909 2008-01-29 Joel Brobecker <brobecker@adacore.com>
911 * infrun.c (wait_for_inferior): Add treat_exec_as_sigtrap parameter
913 (proceed, start_remote): Update call to wait_for_inferior.
914 * inferior.h (wait_for_inferior): Update declaration.
915 * fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c,
916 solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior.
917 * inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as
918 TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED.
920 2008-01-29 Aleksandar Ristovski <aristovski@qnx.com>
922 * varobj (adjust_value_for_child_access): Added checking for
923 returned value from gdb_value_ind.
924 (c_describe_child): Likewise.
925 (cplus_describe_child): Fixed a typo.
927 2008-01-29 Jim Blandy <jimb@red-bean.com>
929 * MAINTAINERS: Update my info.
931 2008-01-29 Vladimir Prus <vladimir@codesourcery.com>
933 Use multiple locations for hardware watchpoints.
934 This eliminates the need to traverse value chain, doing
935 various checks, in three different places.
937 * breakpoint.h (struct bp_location): New fields
938 lengths and watchpoint_type.
939 (struct breakpoint): Remove the val_chain field.
940 * breakpoint.c (is_hardware_watchpoint): New.
941 (free_valchain): Remove.
942 (update_watchpoint): New.
943 (insert_bp_location): For hardware watchpoint, just
945 (insert_breakpoints): Call update_watchpoint_locations
946 on all watchpoints. If we have failed to insert
947 any location of a hardware watchpoint, remove all inserted
949 (remove_breakpoint): For hardware watchpoints, directly
951 (watchpoints_triggered): Iterate over locations.
952 (bpstat_stop_status): Use only first location of
953 a resource watchpoint.
954 (delete_breakpoint): Don't call free_valchain.
955 (print_one_breakpoint): Don't print all
956 locations for watchpoints.
957 (breakpoint_re_set_one): Use update_watchpoint for
960 2008-01-29 Vladimir Prus <vladimir@codesourcery.com>
962 Don't reset watchpoint block on solib load.
964 * breakpoint.c (insert_bp_location): For watchpoints,
966 (breakpoint_re_set_one): Instead of recomputing value
967 and condition for watchpoints, just reset value and
968 let insert_breakpoints/insert_bp_location recompute it.
969 Don't do anything about disabled watchpoint.
971 2008-01-29 Pierre Muller <muller@ics.u-strasbg.fr>
973 * valarith.c (value_binop): Handle unsigned integer
976 2008-01-28 Kevin Buettner <kevinb@redhat.com>
978 * mn10300-tdep.c (mn10300_analyze_prologue): Check for an
979 instruction pattern that appears frequently in position
980 independent code. Fix bug in code which looks for "fmov" and
981 backtracks if no "fmov" is found.
983 2008-01-28 Doug Evans <dje@google.com>
985 * dbxread.c (read_dbx_symtab): Fix indentation.
986 Reformat comments to 80 columns.
987 Move local var def closer to only use.
989 2008-01-28 Daniel Jacobowitz <dan@codesourcery.com>
991 * fork-child.c (SHELL_FILE): Remove #ifndef.
992 (fork_inferior): Remove SHELL_COMMAND_CONCAT.
994 2008-01-25 Pierre Muller <muller@ics.u-strasbg.fr>
996 * i386-tdep.c (i386_skip_noop): New function.
997 (i386_analyze_prologue): Call i386_skip_noop function.
999 2008-01-24 Michael Snyder <msnyder@specifix.com>
1001 * procfs.c (procfs_xfer_partial): Comment, cut/paste error.
1002 * win32-nat.c (win32_xfer_partial): Ditto.
1003 * target.c (default_xfer_partial): Minor whitespace adjustment.
1005 2008-01-24 Pedro Alves <pedro@codesourcery.com>
1007 * arm-tdep.c (arm_addr_bits_remove): In non 26-bit mode, don't
1008 strip bit 1 even if pc doesn't point to thumb code.
1010 2008-01-23 Daniel Jacobowitz <dan@codesourcery.com>
1012 * remote.c (remote_wait): Handle SIGINT between packets.
1013 (remote_async_wait): Likewise.
1015 2008-01-23 Vladimir Prus <vladimir@codesourcery.com>
1016 Chris Demetriou <cgd@google.com>
1018 * thread.c (add_thread_silent): Renamed
1020 (print_thread_events): New variable definition.
1021 (show_print_thread_events): New function.
1022 (_initialize_thread): Add "set print thread-events" and
1023 "show print thread-events" commands.
1024 (add_thread): Announce new thread.
1025 * gdbthread.h (add_thread_silent): Declare.
1026 (print_thread_events): New variable declaration.
1027 * inf-ttrace.c (inf_ttrace_wait): Don't
1028 inform about new thread, as add_thread is always
1029 called too, and will take care of that.
1030 * infrun.c (handle_inferior_event): Likewise.
1031 * procfs.c (procfs_wait): Likewise.
1032 * remote.c (remote_currthread): Likewise.
1033 * sol-thread.c (sol_thread_wait): Likewise.
1034 * win32-nat.c (get_win32_debug_event): Likewise.
1035 * linux-thread-db.c (attach_thread): Likewise.
1036 Remove the verbose parameter.
1037 (check_event): Make detach_thread be verbose
1038 only if print_thread_events is set.
1039 * linux-nat.c (lin_lwp_attach_lwp): Don't inform
1040 about new thread. This is called only from
1041 linux-thread-db.c:attach_thread, which will take care.
1042 Remove the verbose parameter.
1043 * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
1045 2008-01-23 Nick Roberts <nickrob@snap.net.nz>
1047 * mi/mi-cmd-var.c (mi_cmd_var_set_format): Add value field to output.
1049 2008-01-22 Vladimir Prus <vladimir@codesourcery.com>
1051 * breakpoint.c (break_command_really): New parameter
1053 (break_command_1): Pass 0 as
1054 ignore_count to break_command_really.
1055 (gdb_breakpoint): Pass ignore_count to
1056 break_command_really.
1058 2008-01-21 Kevin Buettner <kevinb@redhat.com>
1060 * mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find
1061 sigcontext struct via pointer.
1062 (struct sigframe comment): Update to show new field `psc'.
1064 2008-01-21 Vladimir Prus <vladimir@codesourcery.com>
1066 * infrun.c (handle_inferior_event): If
1067 we failed to remove breakpoints, error,
1068 don't try to increment PC by hand.
1070 2008-01-18 Nick Hudson <nick.hudson@dsl.pipex.com>
1072 Add NetBSD/hppa target and host support.
1074 * hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
1075 (hppabsd_gregset): Move to ...
1076 (hppabsd_regset_from_core_section): Rename
1077 hppaobsd_regset_from_core_section and move to ...
1078 (hppabsd_find_global_pointer): Update comment.
1079 (hppabsd_init_abi): Make global. Do not register
1080 hppabsd_regset_from_core_section.
1081 (hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
1083 (_initialize_hppabsd_tdep): Move to ...
1084 * hppaobsd-tdep.c: ... here. New file.
1085 * hppnbsd-tdep.c: New file.
1086 * hppnbsd-nat.c: New file.
1087 * Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
1088 (ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
1089 (hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
1090 (hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
1091 * configure.host (hppa*-*-netbsd*): New entry.
1092 * configure.tgt (hppa*-*-netbsd*): New entry.
1093 (hppa*-*-openbsd*): Update.
1094 * NEWS (New native configuration): Mention NetBSD/hppa.
1095 (New targets): Mention NetBSD/hppa.
1097 2008-01-18 Markus Deuling <deuling@de.ibm.com>
1099 * gdbarch.sh (function_list): Add new property bits_big_endian to
1101 * gdbarch.{c,h}: Regenerate.
1103 * value.c (struct value): Replace BITS_BIG_ENDIAN by
1104 gdbarch_bits_big_endian (comment).
1105 (unpack_field_as_long, modify_field): Likewise.
1106 * value.h: Likewise (comment).
1107 * valops.c (value_slice): Likewise.
1108 * valarith.c (value_subscript, value_bit_index): Likewise.
1109 * gdbtypes.h (field): Likewise (comment).
1110 * eval.c (evaluate_subexp_standard): Likewise.
1111 * dwarf2read.c (dwarf2_add_field): Likewise.
1112 * ada-lang.c (decode_packed_array, ada_value_primitive_packed_val)
1113 (move_bits, ada_value_assign, value_assign_to_component): Likewise.
1115 * defs.h (BITS_BIG_ENDIAN): Remove.
1117 2008-01-18 Markus Deuling <deuling@de.ibm.com>
1119 * jv-exp.y (yylex): Replace DEPRECATED_STREQN with the appropriate
1121 * m2-exp.y (yylex): Likewise.
1122 * objc-exp.y (yylex): Likewise.
1124 * defs.h (DEPRECATED_STREQN): Remove.
1126 2008-01-17 H.J. Lu <hjl.tools@gmail.com>
1128 * MAINTAINERS: Update my email address.
1130 2008-01-17 Jim Blandy <jimb@codesourcery.com>
1132 * README: Mention gdbserver/README.
1134 2008-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
1136 * valarith.c (value_binop): Handle BINOP_INTDIV
1137 for unsigned and signed integers.
1139 2008-01-17 Ulrich Weigand <uweigand@de.ibm.com>
1141 * s390-tdep.c (s390_gdbarch_init): Set default long double
1142 type to 128-bit IEEE quad.
1144 2008-01-17 Joel Brobecker <brobecker@adacore.com>
1146 * hpux-thread.c (hpux_thread_resume): Delete commented-out code.
1148 2008-01-16 Mark Kettenis <kettenis@gnu.org>
1150 * auxv.c (fprint_target_auxv): Add support for AT_SUN_AUXFLAGS.
1152 * dfp.c, dfp.h: Rename decimal_to_double to decimal_to_doublest.
1153 * value.c: All callers changed.
1155 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1157 * rs6000-nat.c (add_vmap, vmap_ldinfo, vmap_exec): Replace
1158 DEPRECATED_STREQ by its expression.
1159 * coffread.c (coff_locate_sections, coff_symtab_read): Likewise.
1160 * xcoffread.c (read_xcoff_symtab, read_symbol_lineno, find_linenos)
1161 (scan_xcoff_symtab): Likewise.
1162 * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Likewise.
1163 * f-lang.c (find_common_for_function): Likewise.
1164 * objc-exp.y (parse_number): Likewise.
1166 * defs.h (DEPRECATED_STREQ): Remove.
1168 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1170 * mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter.
1171 * mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use
1172 get_frame_arch to get at the current_architecture. Update AM33_MODE
1174 (mn10300_analyze_prologue): Add gdbarch as parameter. Update caller.
1175 (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
1177 (set_reg_offsets, mn10300_analyze_prologue): Fix indentation.
1179 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1181 * amd64-nat.h (amd64_native_gregset_supplies_p): Add gdbarch as
1183 * amd64-nat.c (amd64_native_gregset_supplies_p): Likewise.
1185 (amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace
1186 current_gdbarch by gdbarch. Update caller.
1188 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers)
1189 (amd64_linux_store_inferior_registers): Use get_regcache_arch to get at
1190 the current architecture. Update calls of
1191 amd64_native_gregset_supplies_p.
1192 * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers)
1193 (amd64bsd_store_inferior_registers): Likewise.
1195 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1197 * ppc-linux-nat.c (ppc_register_u_addr): Add gdbarch as parameter.
1198 Replace current_gdbarch by gdbarch. Update caller.
1200 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1202 * dbxread.c (repeated_header_complaint, dbx_symfile_init)
1203 (read_dbx_dynamic_symtab, function_outside_compilation_unit_complaint)
1204 (read_dbx_symtab, end_psymtab, dbx_psymtab_to_symtab_1)
1205 (dbx_psymtab_to_symtab, read_ofile_symtab, process_one_symbol)
1206 (stabsect_build_psymtabs): Fix indentation.
1208 2008-01-15 Michael Snyder <msnyder@specifix.com>
1210 * corelow.c (core_xfer_partial): Comment, cut/paste error.
1212 2008-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
1214 * win32-nat.c (win32_create_inferior): Restore code calling
1215 CloseHandle on ProcessInformation structure.
1217 2008-01-13 Nick Hudson <nick.hudson@dsl.pipex.com>
1219 * configure.ac: Check for void * as 3 argument of ptrace.
1220 * configure: regenerate.
1222 2008-01-11 Markus Deuling <deuling@de.ibm.com>
1224 * alpha-tdep.c (alpha_heuristic_proc_start)
1225 (alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
1226 current_gdbarch by gdbarch.
1228 (alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
1229 current architecture by frame_info. Update alpha_heuristic_proc_start
1232 (alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
1233 get_frame_arch to get at the current architecture by frame_info. Update
1234 alpha_sigtramp_register_address call.
1236 * arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
1237 current_gdbarch by gdbarch. Update caller.
1238 (convert_to_extended, convert_from_extended): Add endianess parameter
1239 for comparison. Update caller.
1240 (arm_extract_return_value, arm_store_return_value): Use
1241 get_regcache_arch to get at the current architecture.
1243 * cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
1244 current_gdbarch by gdbarch. Update caller.
1245 (cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
1246 gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.
1248 * h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
1249 gdbarch as parameter. Update caller.
1250 (h8300_init_frame_cache): Add gdbarch as parameter. Replace
1251 current_gdbarch by gdbarch. Update caller.
1253 * hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and
1254 update caller. Replace current_gdbarch by gdbarch.
1256 * m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
1257 the current architecture. Replace current_gdbarch by gdbarch.
1258 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
1259 (STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
1260 expression. Add gdbarch as parameter and replace current_gdbarch with
1262 (M6811_TDEP): Remove.
1263 (m68hc11_frame_prev_register): Use get_frame_arch to get at the current
1265 (m68hc11_scan_prologue): Add gdbarch as parameter. Replace
1266 current_gdbarch by gdbarch. Update caller.
1268 * m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
1270 (m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
1273 * rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
1274 caller. Relace current_gdbarch by gdbarch.
1275 (altivec_register_p, spe_register_p): Likewise.
1276 * ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
1278 * ppc-linux-nat.c (fetch_register, store_register): Update caller of
1279 altivec_register_p and spe_register_p.
1281 * score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update
1282 caller. Replace current_gdbarch by gdbarch.
1283 (score_analyze_prologue): use get_frame_arch to get at the current
1286 * sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
1287 * sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
1288 current_gdbarch by gdbarch. Update caller.
1289 (sparc_frame_cache): Use get_frame_arch to get at the current
1291 * sparce64-tdep.c (sparc64_skip_prologue): Update call of
1292 sparc_analyze_prologue.
1294 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
1297 2008-01-11 Markus Deuling <deuling@de.ibm.com>
1299 * exec.c: #include "arch-utils.h"
1300 (print_section_info): Use gdbarch_from_bfd to get at the
1301 current architecture. Replace current_gdbarch. Fix indention. Replace
1302 deprecated_print_address_numeric by paddress.
1303 * Makefile.in (exec.o) Add dependency to arch-utils.h.
1305 * valprint.c (val_print_string): Replace
1306 deprecated_print_address_numeric.
1307 * tracepoint.c (trace_mention, scope_info): Likewise.
1308 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
1309 (print_symbol, print_partial_symbols, maintenance_info_psymtabs)
1310 (maintenance_check_symtabs): Likewise.
1311 * symfile.c (list_overlays_command): Likewise.
1312 * stack.c (frame_info, print_block_frame_labels): Likewise.
1313 * printcmd.c (print_address, print_address_demangle)
1314 (address_info): Likewise.
1315 * corefile.c (memory_error): Likewise.
1316 * infcmd.c (jump_command): Likewise.
1317 * breakpoint.c (insert_bp_location, describe_other_breakpoints)
1318 (mention, delete_breakpoint): Likewise.
1319 * c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
1320 * dwarf2read.c (dump_die): Likewise.
1321 * ada-valprint.c (ada_val_print_1): Likewise.
1322 * f-valprint.c (f_val_print): Likewise.
1323 * linux-fork.c (info_forks_command): Likewise.
1324 * m32r-com.c (m32r_load_section, m32r_load)
1325 (m32r_upload_command): Likewise.
1327 * ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.
1329 2008-01-11 Markus Deuling <deuling@de.ibm.com>
1331 * gdbarch.sh (skip_prologue): Add gdbarch
1333 * gdbarch.{c,h}: Regenerate.
1335 * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter.
1336 * amd64-tdep.c (amd64_skip_prologue): Likewise.
1337 * avr-tdep.c (avr_skip_prologue): Likewise.
1338 * cris-tdep.c (cris_skip_prologue): Likewise.
1339 * frv-tdep.c (frv_skip_prologue): Likewise.
1340 * h8300-tdep.c (h8300_skip_prologue): Likewise.
1341 * hppa-tdep.c (hppa_skip_prologue): Likewise.
1342 * i386-tdep.c (i386_skip_prologue): Likewise.
1343 * ia64-tdep.c (ia64_skip_prologue): Likewise.
1344 * iq2000-tdep.c (iq2000_skip_prologue): Likewise.
1345 * m32r-tdep.c (m32r_skip_prologue): Likewise.
1346 * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise.
1347 * m68k-tdep.c (m68k_skip_prologue): Likewise.
1348 * m88k-tdep.c (m88k_skip_prologue): Likewise.
1349 * mep-tdep.c (mep_skip_prologue): Likewise.
1350 * mips-tdep.c (mips_skip_prologue): Likewise.
1351 * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
1352 * mt-tdep.c (mt_skip_prologue): Likewise.
1353 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
1354 * score-tdep.c (score_skip_prologue): Likewise.
1355 * sh64-tdep.c (sh64_skip_prologue): Likewise.
1356 * sh-tdep.c (sh_skip_prologue): Likewise.
1357 * sparc64-tdep.c (sparc64_skip_prologue): Likewise.
1358 * sparc-tdep.c (sparc32_skip_prologue): Likewise.
1359 * spu-tdep.c (spu_skip_prologue): Likewise.
1360 * v850-tdep.c (v850_skip_prologue): Likewise.
1361 * vax-tdep.c (vax_skip_prologue): Likewise.
1362 * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
1363 * xtensa-tdep.c (xtensa_skip_prologue): Likewise.
1365 * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace
1366 current_gdbarch by gdbarch.
1367 * m32c-tdep.c (m32c_skip_prologue): Likewise.
1368 * s390-tdep.c (s390_skip_prologue): Likewise.
1370 2008-01-10 Doug Evans <dje@google.com>
1372 * defs.h (struct continuation_arg): Fix typo in comment.
1373 * target.c (target_translate_tls_address): Fix comment spelling error.
1375 2008-01-09 Thiago Jung Bauermann <bauerman@br.ibm.com>
1377 * doublest.h (DOUBLEST_PRINT_FORMAT): Remove % from string.
1378 (DOUBLEST_SCAN_FORMAT): Likewise.
1379 * dfp.c (decimal_from_floating): Use DOUBLEST_PRINT_FORMAT.
1380 * ada-lex.l (processReal): Prepend "%" to use of DOUBLEST_SCAN_FORMAT.
1381 * c-exp.y (parse_number): Likewise.
1382 * jv-exp.y (parse_number): Likewise.
1383 * objc-exp.y (parse_number): Likewise.
1384 * p-exp.y (parse_number): Likewise.
1386 2008-01-09 Joel Brobecker <brobecker@adacore.com>
1388 * gdbtypes.c (create_array_type): Add handling of null Ada arrays.
1389 (check_typedef): Likewise.
1391 2008-01-09 Luis Machado <luisgpm@br.ibm.com>
1393 * printcmd.c (printf_command): Add seen_big_h, seen_big_d and
1394 seen_double_big_d, treat the new H, D, and DD modifiers as length
1397 2008-01-08 Joel Brobecker <brobecker@adacore.com>
1399 * dwarf2read.c (read_enumeration_type): Add comment.
1401 2008-01-08 Thiago Jung Bauermann <bauerman@br.ibm.com>
1403 * config.in: Regenerate.
1405 2008-01-08 Joel Brobecker <brobecker@adacore.com>
1407 * ada-lang.c (ada_convert_actual): Renames convert_actual.
1409 (ada_convert_actuals): Delete.
1410 * ada-lang.h (ada_convert_actual): Add declaration.
1411 (ada_convert_actuals): Remove declaration.
1412 * infcall.c: #include "ada-lang.h".
1413 (value_arg_coerce): Add new parameter sp. Update function
1414 documetnation. Add handling of Ada function call parameters.
1415 * Makefile.in (infcall.o): Update dependencies.
1417 2008-01-08 Paul Hilfinger <hilfinger@adacore.com>
1419 * ada-lang.c (ensure_lval): Fix value lval kind.
1420 (convert_actual): Add handling for arguments passed by reference.
1422 2008-01-08 Doug Evans <dje@google.com>
1424 * dbxread.c (read_dbx_symtab): Fix indentation.
1426 2008-01-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
1428 * Makefile.in (dfp.o): Depend on expression.h, gdbtypes.h and value.h.
1429 (valarith.o): Depend on dfp.h.
1430 (valops.o): Likewise.
1431 * dfp.c: Include expression.h, gdbtypes.h, value.h and dfp.h.
1432 (set_decnumber_context): New function.
1433 (decimal_check_errors): Likewise.
1434 (decimal_from_number): Likewise.
1435 (decimal_to_number): Likewise.
1436 (decimal_from_string): Use set_decnumber_context and
1437 decimal_check_errors.
1438 (decimal_from_integral): New function.
1439 (decimal_from_floating): Likewise.
1440 (decimal_to_double): Likewise.
1441 (promote_decimal): Likewise.
1442 (decimal_binop): Likewise.
1443 (decimal_is_zero): Likewise.
1444 (decimal_compare): Likewise.
1445 (decimal_convert): Likewise.
1446 * dfp.h (decimal_from_integral): New prototype.
1447 (decimal_from_floating): Likewise.
1448 (decimal_to_double): Likewise.
1449 (decimal_binop): Likewise.
1450 (decimal_is_zero): Likewise.
1451 (decimal_compare): Likewise.
1452 (decimal_convert): Likewise.
1453 * eval.c (evaluate_subexp_standard): Remove expect_type argument from
1454 call to value_from_decfloat.
1455 * valarith.c: Include dfp.h.
1456 (value_args_as_decimal): New function.
1457 (value_binop): Add if block to handle TYPE_CODE_DECFLOAT values.
1458 (value_logical_not): Likewise.
1459 (value_equal): Likewise.
1460 (value_less): Likewise.
1461 (value_pos): Likewise.
1462 (value_neg): Formatting fix.
1463 * valops.c: Include dfp.h.
1464 (value_cast): Add if block to handle TYPE_CODE_DECFLOAT values.
1465 * value.c (unpack_long): Add case to handle TYPE_CODE_DECFLOAT.
1466 (unpack_double): Add if block to handle TYPE_CODE_DECFLOAT.
1467 (value_from_decfloat): Remove expect_type argument.
1468 * value.h (value_from_decfloat): Update prototype.
1470 2008-01-07 Vladimir Prus <vladimir@codesourcery.com>
1472 Ignore change in name of dynamic linker during
1473 execution on Solaris. This also unbreaks pending breakpoints.
1475 * solist.h (struct target_so_ops): New field same.
1476 * solib-svr4.c (svr4_same): New.
1477 (_initialize_svr4_solib): Register svr4_same.
1478 * solib.c (update_solib_list): Use ops->same, if available.
1480 2008-01-06 Christopher Faylor <me+cygwin@cgf.cx>
1482 * win32-nat.c (win32_make_so): Use cygwin-style path to avoid warnings
1483 when using MS-DOS paths.
1485 2008-01-05 Pedro Alves <pedro@codesourcery.com>
1487 * NEWS: Mention --pid and --core command line behaviour changes.
1489 2008-01-05 Pedro Alves <pedro@codesourcery.com>
1491 * main.c (captured_main): Remove 'count' varible and the
1492 ALIGN_STACK_ON_ENTRY block that used it. Error out if --core and
1493 --pid options were issued simultaneously. If an explicit pid
1494 option was passed, don't fallback to core file. Detect extra
1495 arguments better in the presence of explicit pid or core
1498 2008-01-05 Joel Brobecker <brobecker@adacore.com>
1500 * ada-lang.c (ada_which_variant_applies): Correctly compute
1501 the value of the discriminant when the variant record is packed.
1503 2008-01-04 Joel Brobecker <brobecker@adacore.com>
1505 * ada-lang.c (is_name_suffix): Handle middle-name numeric suffixes
1506 that are used to differentiate homonyms.
1508 2008-01-04 Jerome Guitton <guitton@adacore.com>
1510 * ada-lang.c (decode_packed_array_type): Avoid a seg fault
1511 when the type is an anonymous pointer type.
1512 (ada_check_typedef): Avoid a seg fault when the type is null.
1513 * ada-typeprint.c (print_array_type): Add support for pointer
1516 2008-01-04 Paul N. Hilfinger <hilfinger@adacore.com>
1518 * ada-exp.y: Allow '{type} ADDRESS' notation on left of assignment.
1520 2008-01-04 Joel Brobecker <brobecker@adacore.com>
1522 * ada-lang.c (ada_evaluate_subexp): Evaluate tagged types in
1523 EVAL_NORMAL mode when noside is EVAL_AVOID_SIDE_EFFECTS.
1525 2008-01-04 Joel Brobecker <brobecker@adacore.com>
1527 * ada-exp.y (chop_separator): New function.
1528 (write_selectors): Rewrite to re-use chop_separator.
1529 (ada_nget_field_index, get_symbol_field_type): New functions.
1530 (write_var_or_type): Add support for "ptype TYPENAME.FIELD"
1533 2008-01-03 Thiago Jung Bauermann <bauerman@br.ibm.com>
1535 * symtab.c (find_pc_sect_line): Use SYMBOL_VALUE_ADDRESS instead
1536 of SYMBOL_VALUE when working with function symbols.
1538 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1540 * ada-lang.c (resolve_subexp): Add handling of OP_REGISTER
1541 expressions. These expressions do not need to be rewriten.
1543 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1545 * dwarf2read.c (read_enumeration_type): Flag type as stub if
1546 the given die is a declaration.
1548 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1550 * ada-lang.c (ada_array_bound_from_type): Make non-static.
1551 Handle properly the case when the index type is an enumerated type.
1552 Do not return the subtype of the bounds type, just return the
1553 bounds type directly - this is not needed and is more consistent
1554 with what we do for arrays when no XA parallel type exists.
1556 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1558 * ada-lang.c (static_unwrap_type): Add forward declaration.
1559 (template_to_static_fixed_type): Fields of dynamic types sometimes
1560 also need to be unwrapped. Take this into account.
1561 (ada_to_fixed_type_1): Renamed from ada_to_fixed_type.
1562 (ada_to_fixed_type): New wrapper around ada_to_fixed_type_1.
1563 * ada-typeprint.c (ada_print_type): Get the typename from
1564 the original type, not the base type.
1566 2008-01-03 Jerome Guitton <guitton@adacore.com>
1568 * ada-lang.c (ada_value_struct_elt, to_fixed_array_type)
1569 (to_fixed_array_type, ada_to_fixed_value_create, unwrap_value):
1570 Update calls to ada_to_fixed_type.
1571 (ada_template_to_fixed_record_type_1): Ditto, but without looking
1573 (ada_to_fixed_type): Add check_tag parameter; do not look for
1574 tag if null. When looking for a tag, use a fixed record type.
1575 * ada-lang.h (ada_to_fixed_type): Add check_tag parameter.
1576 * ada-valprint.c (printable_val_type, ada_value_print): Update
1577 calls to ada_to_fixed_type.
1579 2008-01-03 Luis Machado <luisgpm@br.ibm.com>
1581 * doublest.c (convert_floatformat_to_doublest): Call
1582 floatformat_to_doublest instead of floatformat_to_double and use
1584 (convert_doublest_to_floatformat): Call floatformat_from_doublest
1585 instead of floatformat_from_double and use DOUBLEST variables.
1587 2008-01-03 Nick Hudson <nick.hudson@dsl.pipex.com>
1589 * MAINTAINERS (Write After Approval): Add self.
1591 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1593 * symfile.c (set_initial_language): Make non-static.
1594 * symfile.h (set_initial_language): Add declaration.
1595 * language.c: #include "symfile.h".
1596 (set_language): Call set_initial_language if the frame language
1597 could not be determined.
1599 2008-01-03 Paul N. Hilfinger <hilfinger@adacore.com>
1601 * eval.c (evaluate_subexp_for_address): Provide frame address to
1602 locate_var_value only if it will be needed.
1604 2008-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1606 * linux-nat.c (linux_child_follow_fork): Call also CHECK_FOR_THREAD_DB.
1608 2008-01-02 Joel Brobecker <brobecker@adacore.com>
1610 * ada-lang.c (ada_evaluate_subexp): Modify the value returned
1611 when noside is EVAL_AVOID_SIDE_EFFECTS to be an lval_memory.
1612 This is needed to make sure that any other treatment applied
1613 to the resulting value does not fail for spurious reason,
1614 such as trying to take the address of this value.
1616 2008-01-02 Joel Brobecker <brobecker@adacore.com>
1618 * ada-lang.c (ada_value_equal): Dereference reference types when
1621 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
1623 Updated copyright notices for most files.
1625 2008-01-01 Christopher Faylor <me+gdb@cgf.cx>
1627 * win32-nat.c (psapi_module_handle): Remove static.
1628 (get_module_name): Rename from psapi_get_dll_name. Revamp slightly to
1629 return first module found if base_address is zero. Don't initialize
1630 psapi function pointers here. Convert to cygwin paths when
1632 (win32_pid_to_exec_file): Use Cygwin's /proc interface to determine
1633 executable name. Use get_module_name when that fails or when
1635 (_initialize_psapi): New function. Initialize psapi stuff before it is
1636 needed or issue a warning if it is not found. Move psapi_module_handle
1639 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1641 * ada-lang.c (ada_remove_trailing_digits): New function.
1642 (ada_remove_po_subprogram_suffix): New function.
1643 (ada_decode): Improve. Move the description of the algorithm
1644 directly inside the code, instead of in the function global
1647 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1649 * ada-valprint.c (ada_val_print_1) [TYPE_CODE_REF]: Ignore deref_ref
1650 and always print the dereferenced value.
1652 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1654 * ada-lang.c (ada_evaluate_subexp, case BINOP_SUB): Add handling
1655 of the case where the first argument is a reference.
1656 (ada_evaluate_subexp, case BINOP_ADD): Likewise.
1658 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1660 Implement support for Ada interface types.
1662 * ada-lang.c (ada_is_dispatch_table_ptr_type): New function.
1663 (ada_is_ignored_field): Ignore fields that are a dispatch table
1666 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1668 * top.c (print_gdb_version): Update copyright year.
1670 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1672 * ChangeLog-2007: New ChangeLog rotation.
1673 * ChangeLog: Reset for 2008.
1674 * config/djgpp/fnchange.lst: Add entries for ChangeLog-2006 and
1677 For older changes see ChangeLog-2007.
1683 version-control: never