Change gdbarch software_single_step frame_info to regcache

[deliverable/binutils-gdb.git] / gdb / ChangeLog

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * gdbarch.sh (software_single_step): Change parameter from frame_info
        to regcache.
        * gdbarch.c, gdbarch.h: Regenerated.
        * aarch64-tdep.c (aarch64_software_single_step): Change parameter
        from frame_info to regcache.  Don't call get_current_regcache.
        * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
        (alpha_software_single_step): Likewise.
        * alpha-tdep.h (alpha_software_single_step): Update declaration.
        * arm-linux-tdep.c (arm_linux_software_single_step): Likewise.
        * arm-tdep.c (arm_software_single_step): Likewise.
        * arm-tdep.h (arm_software_single_step): Likewise.
        * breakpoint.c (insert_single_step_breakpoint): Pass regcache to
        gdbarch_software_single_step.
        * cris-tdep.c (cris_software_single_step): Change parameter from
        frame_info to regcache.  Don't call get_current_regcache.
        * mips-tdep.c (mips_software_single_step): Likewise.
        * mips-tdep.h (mips_software_single_step): Update declaration.
        * moxie-tdep.c (moxie_software_single_step): Likewise.
        * nios2-tdep.c (nios2_software_single_step): Likewise.
        * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration.
        * rs6000-aix-tdep.c (rs6000_software_single_step): Likewise.
        * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
        * s390-linux-tdep.c (s390_software_single_step): Likewise.
        * sparc-tdep.c (sparc_software_single_step): Likewise.
        * spu-tdep.c (spu_software_single_step): Likewise.
        * tic6x-tdep.c (tic6x_software_single_step): Likewise.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * spu-tdep.c (spu_software_single_step): Call get_regcache_arch
        instead of get_frame_arch.  Call regcache_read_pc instead of
        get_frame_pc.  Call regcache_raw_get_unsigned instead of
        get_frame_register_unsigned.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * tic6x-tdep.c (tic6x_condition_true): Replace frame with
        regcache.  Call regcache_raw_get_signed instead of
        get_frame_register_signed.
        (tic6x_get_next_pc): Likewise.  Caller updated.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * rs6000-aix-tdep.c (branch_dest): Replace parameter frame with
        regcache.  Call get_regcache_arch instead of get_frame_arch.
        Call regcache_raw_get_unsigned instead of
        get_frame_register_unsigned.
        (rs6000_software_single_step): Likewise.
        * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Call
        get_regcache_arch instead of get_frame_arch.  Call
        regcache_read_pc instead of get_frame_pc.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * s390-linux-tdep.c (s390_software_single_step): Call
        get_regcache_arch instead of get_frame_arch.  Call
        regcache_read_pc instead of get_frame_pc.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * sparc-tdep.c (sparc_analyze_control_transfer): Replace parameter
        frame with regcache.  Call get_current_frame.
        (sparc_software_single_step): Call get_regcache_arch instead of
        get_frame_arch.  Call regcache_raw_get_unsigned instead of
        get_frame_register_unsigned.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * nios2-tdep.c (nios2_get_next_pc): Replace parameter frame
        with regcache.  Call regcache_raw_get_signed instead of
        get_frame_register_unsigned.
        (nios2_software_single_step): Call get_regcache_arch
        instead of get_frame_arch.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * moxie-tdep.c (moxie_software_single_step): Call
        get_regcache_arch instead of get_frame_arch.  Call
        regcache_read_pc instead of get_frame_pc.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * mips-tdep.c (mips32_bc1_pc): Replace parameter frame with
        regcache.  Call regcache_raw_get_unsigned instead of
        get_frame_register_unsigned.
        (mips32_next_pc): Likewise.
        (micromips_bc1_pc): Likewise.
        (micromips_next_pc): Likewise.
        (extended_mips16_next_pc): Likewise.
        (mips16_next_pc): Likewise.
        (mips_next_pc): Likewise.
        (mips_software_single_step): Call get_regcache_arch instead
        of get_frame_arch.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * cris-tdep.c (find_step_target): Replace parameter frame
        with regcache.  Call get_regcache_arch instead of
        get_frame_arch.  Call regcache_raw_get_unsigned instead of
        get_frame_register_unsigned.
        (cris_software_single_step): Call get_regcache_arch instead
        of get_frame_arch.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * alpha-tdep.c (alpha_deal_with_atomic_sequence): Call
        get_regcache_arch instead of get_frame_arch.  Call
        regcache_read_pc instead of get_frame_pc.
        (alpha_next_pc): Replace parameter frame with regcache.
        Call regcache_raw_get_unsigned instead of
        get_frame_register_unsigned.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * aarch64-tdep.c (aarch64_software_single_step): Call
        get_regcache_arch instead of get_frame_arch.  Call
        regcache_read_pc instead of get_frame_pc.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * regcache.c (regcache_raw_get_signed): New function.
        * regcache.h (regcache_raw_get_signed): Declare.

2016-11-22  Yao Qi  <yao.qi@linaro.org>

        * value.c (value_from_component): Use VALUE_NEXT_FRAME_ID
        instead of VALUE_FROM_ID.

2016-11-21  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (%o: $(srcdir)/mi/%.c): Add missing POSTCOMPILE
        step.

2016-11-21  Yao Qi  <yao.qi@linaro.org>

        * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
        Don't call value_from_contents_and_address and
        set_value_address.  Call value_from_component.
        * python/py-prettyprint.c (gdbpy_apply_val_pretty_printer):
        Likewise.
        * value.c (value_from_component): New function.
        * value.h (value_from_component): Likewise.
        * valarith.c (value_subscripted_rvalue): Call
        value_from_component.

2016-11-19  Joel Brobecker  <brobecker@adacore.com>

        * contrib/ari/gdb_ari.sh: Add detection of printf_vma and
        sprintf_vma.

2016-11-18  Simon Marchi  <simon.marchi@polymtl.ca>

        * Makefile.in (%.o: $(srcdir)/gdbtk/generic/%.c): Fix typo.

2016-11-17  Simon Marchi  <simon.marchi@polymtl.ca>

        (PYTHON_CFLAGS): Move up.
        (%.o: $(srcdir)/arch/%.c): New rule.
        (%.o: $(srcdir)/cli/%.c): New rule.
        (%.o: $(srcdir)/common/%.c): New rule.
        (%.o: $(srcdir)/compile/%.c): New rule.
        (%.o: $(srcdir)/gdbtk/generic/%.c): New rule.
        (%.o: $(srcdir)/guile/%.c): New rule.
        (%.o: $(srcdir)/mi/%.c): New rule.
        (%.o: $(srcdir)/nat/%.c): New rule.
        (%.o: $(srcdir)/python/%.c): New rule.
        (%.o: $(srcdir)/target/%.c): New rule.
        (%.o: $(srcdir)/tui/%.c): New rule.
        (cli-cmds.o): Remove.
        (cli-decode.o): Likewise.
        (cli-dump.o): Likewise.
        (cli-interp.o): Likewise.
        (cli-logging.o): Likewise.
        (cli-script.o): Likewise.
        (cli-setshow.o): Likewise.
        (cli-utils.o): Likewise.
        (compile.o): Likewise.
        (compile-c-types.o): Likewise.
        (compile-c-symbols.o): Likewise.
        (compile-object-load.o): Likewise.
        (compile-object-run.o): Likewise.
        (compile-loc2c.o): Likewise.
        (compile-c-support.o): Likewise.
        (gdbtk.o): Likewise.
        (gdbtk-bp.o): Likewise.
        (gdbtk-cmds.o): Likewise.
        (gdbtk-hooks.o): Likewise.
        (gdbtk-interp.o): Likewise.
        (gdbtk-main.o): Likewise.
        (gdbtk-register.o): Likewise.
        (gdbtk-stack.o): Likewise.
        (gdbtk-varobj.o): Likewise.
        (gdbtk-wrapper.o): Likewise.
        (mi-cmd-break.o): Likewise.
        (mi-cmd-catch.o): Likewise.
        (mi-cmd-disas.o): Likewise.
        (mi-cmd-env.o): Likewise.
        (mi-cmd-file.o): Likewise.
        (mi-cmd-info.o): Likewise.
        (mi-cmds.o): Likewise.
        (mi-cmd-stack.o): Likewise.
        (mi-cmd-target.o): Likewise.
        (mi-cmd-var.o): Likewise.
        (mi-console.o): Likewise.
        (mi-getopt.o): Likewise.
        (mi-interp.o): Likewise.
        (mi-main.o): Likewise.
        (mi-out.o): Likewise.
        (mi-parse.o): Likewise.
        (mi-symbol-cmds.o): Likewise.
        (mi-common.o): Likewise.
        (signals.o): Likewise.
        (common-utils.o): Likewise.
        (gdb_vecs.o): Likewise.
        (xml-utils.o): Likewise.
        (ptid.o): Likewise.
        (buffer.o): Likewise.
        (filestuff.o): Likewise.
        (format.o): Likewise.
        (vec.o): Likewise.
        (print-utils.o): Likewise.
        (rsp-low.o): Likewise.
        (errors.o): Likewise.
        (common-debug.o): Likewise.
        (cleanups.o): Likewise.
        (common-exceptions.o
        (posix-strerror.o): Likewise.
        (mingw-strerror.o): Likewise.
        (btrace-common.o): Likewise.
        (fileio.o): Likewise.
        (common-regcache.o): Likewise.
        (signals-state-save-restore.o): Likewise.
        (new-op.o): Likewise.
        (waitstatus.o): Likewise.
        (arm.o): Likewise.
        (arm-linux.o): Likewise.
        (arm-get-next-pcs.o): Likewise.
        (x86-dregs.o): Likewise.
        (linux-btrace.o): Likewise.
        (linux-osdata.o): Likewise.
        (linux-procfs.o): Likewise.
        (linux-ptrace.o): Likewise.
        (linux-waitpid.o): Likewise.
        (mips-linux-watch.o): Likewise.
        (ppc-linux.o): Likewise.
        (linux-personality.o): Likewise.
        (x86-linux.o): Likewise.
        (x86-linux-dregs.o): Likewise.
        (amd64-linux-siginfo.o): Likewise.
        (linux-namespaces.o): Likewise.
        (aarch64-linux-hw-point.o): Likewise.
        (aarch64-linux.o): Likewise.
        (aarch64-insn.o): Likewise.
        (tui.o): Likewise.
        (tui-command.o): Likewise.
        (tui-data.o): Likewise.
        (tui-disasm.o): Likewise.
        (tui-file.o): Likewise.
        (tui-hooks.o): Likewise.
        (tui-interp.o): Likewise.
        (tui-io.o): Likewise.
        (tui-layout.o): Likewise.
        (tui-out.o): Likewise.
        (tui-regs.o): Likewise.
        (tui-source.o): Likewise.
        (tui-stack.o): Likewise.
        (tui-win.o): Likewise.
        (tui-windata.o): Likewise.
        (tui-wingeneral.o): Likewise.
        (tui-winsource.o): Likewise.
        (guile.o): Likewise.
        (scm-arch.o): Likewise.
        (scm-auto-load.o): Likewise.
        (scm-block.o): Likewise.
        (scm-breakpoint.o): Likewise.
        (scm-cmd.o): Likewise.
        (scm-disasm.o): Likewise.
        (scm-exception.o): Likewise.
        (scm-frame.o): Likewise.
        (scm-gsmob.o): Likewise.
        (scm-iterator.o): Likewise.
        (scm-lazy-string.o): Likewise.
        (scm-math.o): Likewise.
        (scm-objfile.o): Likewise.
        (scm-param.o): Likewise.
        (scm-ports.o): Likewise.
        (scm-pretty-print.o): Likewise.
        (scm-progspace.o): Likewise.
        (scm-safe-call.o): Likewise.
        (scm-string.o): Likewise.
        (scm-symbol.o): Likewise.
        (scm-symtab.o): Likewise.
        (scm-type.o): Likewise.
        (scm-utils.o): Likewise.
        (scm-value.o): Likewise.
        (python.o): Likewise.
        (py-arch.o): Likewise.
        (py-auto-load.o): Likewise.
        (py-block.o): Likewise.
        (py-bpevent.o): Likewise.
        (py-breakpoint.o): Likewise.
        (py-cmd.o): Likewise.
        (py-continueevent.o): Likewise.
        (py-xmethods.o): Likewise.
        (py-event.o): Likewise.
        (py-evtregistry.o): Likewise.
        (py-evts.o): Likewise.
        (py-exitedevent.o): Likewise.
        (py-finishbreakpoint.o): Likewise.
        (py-frame.o): Likewise.
        (py-framefilter.o): Likewise.
        (py-function.o): Likewise.
        (py-gdb-readline.o): Likewise.
        (py-inferior.o): Likewise.
        (py-infevents.o): Likewise.
        (py-infthread.o): Likewise.
        (py-lazy-string.o): Likewise.
        (py-linetable.o): Likewise.
        (py-newobjfileevent.o): Likewise.
        (py-objfile.o): Likewise.
        (py-param.o): Likewise.
        (py-prettyprint.o): Likewise.
        (py-progspace.o): Likewise.
        (py-signalevent.o): Likewise.
        (py-stopevent.o): Likewise.
        (py-symbol.o): Likewise.
        (py-symtab.o): Likewise.
        (py-threadevent.o): Likewise.
        (py-type.o): Likewise.
        (py-unwind.o): Likewise.
        (py-utils.o): Likewise.
        (py-value.o): Likewise.
        (py-varobj.o): Likewise.

2016-11-17  Simon Marchi  <simon.marchi@polymtl.ca>

        * Makefile.in (.c.o): Replace rule with ...
        (%.o: %.c): ... this one.
        (.po.gmo): Replace rule with ...
        (%.gmo: %.po): ... this one.
        (.po.pox): Replace rule with ...
        (%.pox: %.po): ... this one.
        (.y.c): Replace rule with ...
        (%.c: %.y): ... this one.
        (.l.c): Replace rule with ...
        (%.c: %.l): ... this one.
        (.SUFFIXES): Remove all instances.

2016-11-17  Simon Marchi  <simon.marchi@polymtl.ca>

        * Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
        prefixed with @GMAKE_FALSE@.  Update comment related to non-GNU
        make.
        * configure.ac: Remove checks for the make program.
        * configure: Re-generate.

2016-11-17  Simon Marchi  <simon.marchi@polymtl.ca>

        * NEWS: Mention requirement of GNU make.

2016-11-17  Pedro Alves  <palves@redhat.com>

        * c-exp.y (c_print_token): Use parser_fprintf instead of fprintf.

2016-11-17  Pedro Alves  <palves@redhat.com>

        * ctf.c [USE_WIN32API] (mkdir): Delete.

2016-11-16  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (ada_value_primitive_packed_val): Use unique_ptr and
        new gdb_byte[] instead of malloc and cleanups.

2016-11-17  Pedro Alves  <palves@redhat.com>

        * tracepoint.c (collection_list::add_memrange): Add gdbarch
        parameter.  Use paddress instead of printf_vma.  Adjust recursive
        calls.
        (collection_list::stringify): Use paddress and phex_nz instead of
        sprintf_vma.  Adjust add_memrange call.
        * tracepoint.h (collection_list::add_memrange): Add gdbarch
        parameter.

2016-11-16  Kevin Buettner  <kevinb@redhat.com>

        * frame.c (get_prev_frame): Stash frame id for current frame
        prior to computing frame id for previous frame.

2016-11-16  Kevin Buettner  <kevinb@redhat.com>

        * python/py-unwind.c (pending_framepy_read_register): Use
        value_of_register() instead of get_frame_register_value().

2016-11-16  Kevin Buettner  <kevinb@redhat.com>

        * value.h (VALUE_FRAME_ID): Rename to VALUE_NEXT_FRAME_ID. Update
        comment.  Create new VALUE_FRAME_ID which is defined in terms of
        VALUE_NEXT_FRAME_ID.
        (deprecated_value_frame_id_hack): Rename to
        deprecated_value_next_frame_id_hack.
        * dwarf2loc.c, findvar.c, frame-unwind.c, sentinel-frame.c,
        valarith.c, valops.c, value.c: Adjust nearly all occurences of
        VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID.  Add comments for those
        which did not change.
        * value.c (struct value): Rename frame_id field to next_frame_id.
        Update comment.
        (deprecated_value_frame_id_hack): Rename to
        deprecated_value_next_frame_id_hack.
        (value_fetch_lazy): Call frame_unwind_register_value()
        instead of get_frame_register_value().
        * frame.c (get_prev_frame_id_by_id): New function.
        * frame.h (get_prev_frame_id_by_id): Declare.
        * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Make
        VALUE_NEXT_FRAME_ID refer to the next frame.
        * findvar.c (value_of_register_lazy): Likewise.
        (default_value_from_register): Likewise.
        (value_from_register): Likewise.
        * frame_unwind.c (frame_unwind_got_optimized): Likewise.
        * sentinel-frame.c (sentinel_frame_prev_register): Likewise.
        * value.h (VALUE_FRAME_ID): Update comment describing this macro.

2016-11-16  Kevin Buettner  <kevinb@redhat.com>

        * frame.h (enum frame_id_stack_status): Add FID_STACK_SENTINEL.
        (struct frame_id): Increase number of bits required for storing
        stack status to 3 from 2.
        (sentinel_frame_id): New declaration.
        (get_next_frame_sentinel_okay): Declare.
        (frame_find_by_id_sentinel_okay): Declare.
        * frame.c (current_frame): Rename this static global to...
        (sentinel_frame): ...this static global, which has also been
        moved an earlier location in the file.
        (fprint_frame_id): Add case for sentinel frame id.
        (get_frame_id): Return early for sentinel frame.
        (sentinel_frame_id): Define.
        (frame_find_by_id): Add case for sentinel_frame_id.
        (create_sentinel_frame): Use sentinel_frame_id for this_id.value
        instead of null_frame_id.
        (get_current_frame): Add local declaration for `current_frame'.
        Remove local declaration for `sentinel_frame.'
        (get_next_frame_sentinel_okay): New function.
        (reinit_frame_cache): Use `sentinel_frame' in place of
        `current_frame'.

2016-11-15  Pedro Alves  <palves@redhat.com>

        * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
        38237baf99386101934cd93278023aa4ae523ec0.
        * gnulib/configure, gnulib/config.in: Regenerate.
        * gnulib/import/Makefile.am: Regenerate.
        * gnulib/import/Makefile.in: Regenerate.
        * gnulib/import/canonicalize-lgpl.c: Update.
        * gnulib/import/extra/snippet/c++defs.h: Update.
        * gnulib/import/m4/stdint.m4: Update.
        * gnulib/import/m4/stdlib_h.m4: Update.
        * gnulib/import/math.in.h: Update.
        * gnulib/import/stdlib.in.h: Update.
        * gnulib/import/sys_time.in.h: Update.

2016-11-15  Pedro Alves  <palves@redhat.com>

        * common/common-defs.h: Update comment.
        * common/gdb_unique_ptr.h: Update header comment and copyright
        year.
        (gdb::unique_ptr, gdb::move): Delete.

2016-11-15  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (create_excep_cond_exprs): Use std::move instead of
        gdb::move.
        * break-catch-throw.c (handle_gnu_v3_exceptions): Use
        std::unique_ptr instead of gdb::unique_ptr.
        * breakpoint.c (watch_command_1): Use std::move instead of
        gdb::move.
        * cli/cli-dump.c (dump_memory_to_file, restore_binary_file): Use
        std::unique_ptr instead of gdb::unique_ptr.
        * dtrace-probe.c (dtrace_process_dof_probe): Use std::move instead
        of gdb::move.
        * elfread.c (elf_read_minimal_symbols): Use std::unique_ptr
        instead of gdb::unique_ptr.
        * mi/mi-main.c (mi_cmd_data_read_memory): Use std::unique_ptr
        instead of gdb::unique_ptr.
        * parse.c (parse_expression_for_completion): Use std::move instead
        of gdb::move.
        * printcmd.c (display_command): std::move instead of gdb::move.

2016-11-14  Markus Metzger  <markus.t.metzger@intel.com>

        * nat/linux-btrace.c (perf_event_read): Allow data_head < size.
        * nat/linux-btrace.c (perf_event_read_all): Do not adjust size.

2016-11-12  Tom Tromey  <tom@tromey.com>

        * rust-exp.y (super_name): Use std::vector.
        (lex_number): Use std::string.
        (convert_params_to_types): Return std::vector.
        (convert_ast_to_type, convert_name): Update.
        * rust-lang.c (rust_get_disr_info): Use unique_xmalloc_ptr.

2016-11-12  Tom Tromey  <tom@tromey.com>

        * rust-lang.c (rust_get_disr_info): Use std::string in one more
        spot.

2016-11-11  Yao Qi  <yao.qi@linaro.org>

        * spu-tdep.c (spu_software_single_step): Don't call
        get_frame_register_bytes, call get_frame_register_unsigned
        instead.

2016-11-11  Yao Qi  <yao.qi@linaro.org>

        * cp-valprint.c (cp_print_value): Remove local base_valaddr.
        * extension-priv.h (struct extension_language_ops)
        <apply_val_pretty_printer>: Remove the second parameter.
        Remove const from "struct value *".  Callers updated.
        * extension.c (apply_ext_lang_val_pretty_printer): Update
        comments.  Remove parameter valaddr.  Remove const from
        "struct value *".
        * extension.h (apply_ext_lang_val_pretty_printer): Update
        declaration.
        * guile/guile-internal.h (gdbscm_apply_val_pretty_printer):
        Update declaration.
        * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
        Remove parameter valaddr.  Remove const from "struct value *".
        * python/py-prettyprint.c (gdbpy_apply_val_pretty_printer):
        Likewise.
        * python/python-internal.h (gdbpy_apply_val_pretty_printer):
        Update declaration.

2016-11-11  Yao Qi  <yao.qi@linaro.org>

        * c-lang.h (cp_print_value_fields): Update declaration.
        * cp-valprint.c (cp_print_value): Update declaration.
        (cp_print_value_fields): Remove parameter valaddr.  Callers
        updated.
        (cp_print_value): Likewise.

2016-11-09  Tom Tromey  <tom@tromey.com>

        * varobj.h (varobj_get_display_hint): Change return type.
        * varobj.c (varobj_get_display_hint): Return unique_xmalloc_ptr.
        (varobj_value_get_print_value): Update.
        * python/python.c (gdbpy_before_prompt_hook, gdbpy_print_stack)
        (gdbpy_apply_type_printers): Update.
        * python/python-internal.h (unicode_to_target_string)
        (python_string_to_target_string, python_string_to_host_string)
        (gdbpy_obj_to_string, gdbpy_exception_to_string)
        (gdbpy_get_display_hint): Change return types.
        * python/py-varobj.c (py_varobj_iter_next): Update.
        * python/py-value.c (valpy_getitem, convert_value_from_python):
        Update.
        * python/py-utils.c (unicode_to_encoded_string)
        (unicode_to_target_string, python_string_to_target_string)
        (python_string_to_host_string, gdbpy_obj_to_string)
        (gdbpy_exception_to_string): Return unique_xmalloc_ptr.
        * python/py-unwind.c (pyuw_parse_register_id): Update.
        * python/py-type.c (typy_getitem): Update.
        * python/py-prettyprint.c (gdbpy_get_display_hint)
        (print_stack_unless_memory_error, print_children)
        (gdbpy_apply_val_pretty_printer): Update.
        * python/py-param.c (set_parameter_value): Update.
        (get_doc_string, call_doc_function): Return unique_xmalloc_ptr.
        (get_set_value, get_show_value, compute_enum_values, parmpy_init):
        Update.
        * python/py-infthread.c (thpy_set_name): Update.
        * python/py-function.c (fnpy_call, fnpy_init): Update.
        * python/py-framefilter.c (extract_sym): Change "name" to
        unique_xmalloc_ptr.
        (enumerate_args, enumerate_locals): Update.
        (py_print_frame): Use unique_xmalloc_ptr.
        * python/py-frame.c (frapy_read_var): Update.  Remove cleanup.
        * python/py-cmd.c (cmdpy_function, cmdpy_completer, cmdpy_init):
        Update.
        * python/py-breakpoint.c (bppy_set_condition): Use
        unique_xmalloc_ptr.
        (bppy_init): Likewise.  Remove cleanup.
        (local_setattro): Update.
        * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_list_children)
        (varobj_update_one): Update.

2016-11-09  Pedro Alves  <palves@redhat.com>

        * ax-gdb.c (agent_eval_command_one): Use std::move instead of
        gdb::move.
        * ax.h (agent_expr_up): Use std::unique_ptr instead of
        gdb::unique_ptr.
        * breakpoint.c (parse_cond_to_aexpr): Use std::move instead of
        gdb::move.
        * tracepoint.c (collection_list::collect_symbol): Likewise.
        (collection_list::~collection_list): Delete.
        (encode_actions_1): Use std::move instead of gdb::move.
        (collection_list::add_aexpr): Use std::move instead of
        unique_ptr::release.
        * tracepoint.h (collection_list) <~collection_list>: Delete
        declaration.
        <m_aexprs>: Now a vector of agent_ptr_up.

2016-11-09  Pedro Alves  <palves@redhat.com>

        * main.c (struct cmdarg): Add constructor.
        (captured_main_1): Use vector::emplace_back.
        * tracepoint.c (collection_list::add_memrange): Likewise.

2016-11-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * tui/tui-winsource.c (tui_alloc_source_buffer): Remove
        failed-xmalloc handling.

2016-11-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * tui/tui-winsource.c (tui_alloc_source_buffer): Subtract
        highlight box's overhead when calculating the content height.

2016-11-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * tui/tui-disasm.c (tui_set_disassem_content): Fix calculation of
        the longest disassembly line's length.

2016-11-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * tui/tui-disasm.c (tui_set_disassem_content): Fix line buffer
        overrun due to unchecked strcpy.

2016-11-09  Tristan Gingold  <gingold@adacore.com>

        * darwin-nat.c (find_inferior_task_it): Fix indentation.
        (find_inferior_notify_it): Remove.
        (find_inferior_pid_it): New function.
        (darwin_find_inferior_by_notify): Remove.
        (darwin_find_inferior_by_pid): New function.
        (darwin_find_new_inferior): New function.
        (darwin_check_message_ndr): New function from
        darwin_decode_exception_message.
        (darwin_decode_exception_message): Call darwin_check_message_ndr.
        Handle SIGTRAP addressed to an unknown task (when a task spawned).
        (darwin_decode_notify_message): New function.
        (darwin_decode_message): Handle unknown task.
        (darwin_deallocate_threads): New function from darwin_mourn_inferior.
        (darwin_mourn_inferior): Use darwin_deallocate_threads and
        darwin_deallocate_exception_ports.
        (darwin_deallocate_exception_ports): New function from
        darwin_mourn_inferior.
        (darwin_setup_exceptions): New function from darwin_attach_pid.
        (darwin_setup_request_notification): Likewise.
        (darwin_attach_pid): Call darwin_setup_request_notification and
        darwin_setup_request_notification.

2016-11-08  Tom Tromey  <tom@tromey.com>

        * python/py-framefilter.c (py_print_frame): Use
        get_addr_from_python.  Check for errors when getting line number.

2016-11-08  Yao Qi  <yao.qi@linaro.org>

        * ada-lang.h (ada_val_print): Remove second parameter.  Remove
        const from "struct value *".
        * ada-valprint.c (print_field_values): Remove const from
        "struct value *".
        (val_print_packed_array_elements): Likewise.
        (print_variant_part): Likewise.
        (ada_val_print_string): Likewise.
        (ada_val_print_gnat_array): Likewise.
        (ada_val_print_ptr): Likewise.
        (ada_val_print_num): Likewise.
        (ada_val_print_enum): Likewise.
        (ada_val_print_flt): Likewise.
        (ada_val_print_union): Likewise.
        (ada_val_print_struct_union): Likewise.
        (ada_val_print_ref): Likewise.
        (ada_val_print_1): Remove second parameter.  Remove const from
        "struct value *".
        (ada_val_print): Likewise.
        * c-lang.h (c_val_print): Likewise.
        * c-valprint.c (c_val_print_array): Remove const from
        "struct value *".
        (c_val_print_ptr): Likewise.
        (c_val_print_struct): Likewise.
        (c_val_print_union): Likewise.
        (c_val_print_int): Likewise.
        (c_val_print_memberptr): Likewise.
        (c_val_print): Remove second parameter.  Remove const from
        "struct value *".  All callers updated.
        * cp-valprint.c (cp_print_value): Remove const from
        "struct value *".
        (cp_print_value_fields): Likewise.
        (c_val_print_value): Likewise.
        * d-lang.h (d_val_print): Remove second parameter.  Remove const
        from "struct value *".
        * d-valprint.c (dynamic_array_type): Likewise.
        (d_val_print): Likewise.
        * f-lang.h (f_val_print): Likewise.
        * f-valprint.c (f_val_print): Likewise.
        * go-lang.h (go_val_print): Likewise.
        * go-valprint.c (print_go_string): Likewise.
        (go_val_print): Likewise.
        * language.c (unk_lang_val_print): Likewise.
        * language.h (struct language_defn) <la_val_print>: Likewise.
        Update comments.
        (LA_VAL_PRINT): Remove.
        * m2-lang.h (m2_val_print): Remove const from
        "struct value *".
        * m2-valprint.c (m2_print_array_contents): Likewise.
        (m2_val_print): Likewise.
        * p-lang.h (pascal_val_print): Remove second parameter.  Remove
        const from "struct value *".
        (pascal_object_print_value_fields): Likewise.
        * p-valprint.c (pascal_val_print): Likewise.
        (pascal_object_print_value_fields): Likewise.
        (pascal_object_print_value): Likewise.
        * rust-lang.c (rust_get_disr_info): Likewise.
        (val_print_struct): Likewise.
        (rust_val_print): Likewise.
        * valprint.c (generic_val_print_array): Likewise.
        (generic_val_print_ptr): Likewise.
        (generic_val_print_memberptr): Likewise.
        (generic_val_print_ref): Likewise.
        (generic_val_print_enum): Likewise.
        (generic_val_print_flags): Likewise.
        (generic_val_print_func): Likewise.
        (generic_val_print_bool): Likewise.
        (generic_val_print_int): Likewise.
        (generic_val_print_char): Likewise.
        (generic_val_print_float): Likewise.
        (generic_val_print_decfloat): Likewise.
        (generic_val_print_complex): Likewise.
        (generic_val_print): Likewise.
        (val_print): Likewise.
        (common_val_print): Likewise.
        (val_print_type_code_flags): Likewise.
        (val_print_scalar_formatted): Likewise.
        (val_print_array_elements): Likewise.
        * valprint.h (val_print_array_elements): Update declaration.
        (val_print_scalar_formatted): Likewise.
        (generic_val_print): Likewise.
        * value.h (val_print): Likewise.

2016-11-08  Yao Qi  <yao.qi@linaro.org>

        * mt-tdep.c (mt_registers_info): Call
        get_frame_register_value instead of
        deprecated_frame_register_read.
        * sh64-tdep.c (sh64_do_register): Likewise.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * ax.h (agent_expr_p): Delete.
        (DEF_VEC_P (agent_expr_p)): Delete.
        * breakpoint.c (build_target_condition_list)
        (build_target_command_list): Adjust to use of std::vector.
        (bp_location_dtor): Remove now unnecessary VEC_free calls.
        * breakpoint.h: Include <vector>.
        (struct bp_target_info) <conditions, tcommands>: Now
        std::vector's.
        * remote.c (remote_add_target_side_condition): bp_tgt->conditions
        is now a std::vector; adjust.
        (remote_add_target_side_commands, remote_insert_breakpoint):
        bp_tgt->tcommands is now a std::vector; adjust.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * ax-gdb.c (is_nontrivial_conversion): Use agent_expr_up.
        (gen_trace_for_var, gen_trace_for_expr, gen_eval_for_expr)
        (gen_trace_for_return_address, gen_printf): Use and return an
        agent_expr_up.  Don't use make_cleanup_free_agent_expr.
        (agent_eval_command_one, maint_agent_printf_command): Use
        agent_expr_up.  Don't use make_cleanup_free_agent_expr.
        * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
        (gen_trace_for_return_address, gen_eval_for_expr, gen_printf): Use
        agent_expr_up.
        * ax-general.c (new_agent_expr): Rename to ...
        (agent_expr::agent_expr): ... this, and now a constructor.
        (free_agent_expr): Rename to ...
        (agent_expr::~agent_exp): ... this, and now a destructor.
        (do_free_agent_expr_cleanup, make_cleanup_free_agent_expr):
        Delete.
        * ax.h (struct agent_expr): Add ctor/dtor.
        (agent_expr_up): New typedef.
        (new_agent_expr, free_agent_expr, make_cleanup_free_agent_expr):
        Delete declarations.
        * breakpoint.c (parse_cond_to_aexpr): Use and return an
        agent_expr_up.  Don't use make_cleanup_free_agent_expr.
        (build_target_condition_list): Adjust to use agent_expr_up.
        (parse_cmd_to_aexpr): Use and return an agent_expr_up.  Don't use
        make_cleanup_free_agent_expr.
        (build_target_command_list): Adjust to use agent_expr_up.
        (force_breakpoint_reinsertion): Adjust to use agent_expr_up.
        (bp_location_dtor): Remove unnecessary free_agent_expr and xfree
        calls.
        * breakpoint.h (struct bp_target_info) <cond_bytecode,
        cmd_bytecode>: Now agent_expr_up's.
        * remote.c (remote_download_tracepoint): Adjust to use
        agent_expr_up and remove use of make_cleanup_free_agent_expr.
        * tracepoint.c (validate_actionline, collect_symbol): Adjust to
        use agent_expr_up and remove uses of make_cleanup_free_agent_expr.
        (collection_list::~collection_list): Call delete instead of
        free_agent_expr.
        (encode_actions_1): Adjust to use agent_expr_up and remove uses of
        make_cleanup_free_agent_expr.
        (add_aexpr): Change parameter type to agent_expr_up; Return a raw
        agent_expr pointer.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (ada_name_for_lookup, type_as_string): Use and return
        std::string.
        (type_as_string_and_cleanup): Delete.
        (ada_lookup_struct_elt_type): Use type_as_string.
        * ada-lang.h (ada_name_for_lookup): Now returns std::string.
        * ada-varobj.c (ada_varobj_scalar_image): Return a std::string.
        (ada_varobj_describe_child): Make 'child_name' and
        'child_path_expr' parameters std::string pointers.
        (ada_varobj_describe_struct_child, ada_varobj_describe_ptr_child):
        Likewise, and use string_printf.
        (ada_varobj_describe_simple_array_child)
        (ada_varobj_describe_child): Likewise.
        (ada_varobj_get_name_of_child, ada_varobj_get_path_expr_of_child)
        (ada_varobj_get_value_image)
        (ada_varobj_get_value_of_array_variable)
        (ada_varobj_get_value_of_variable, ada_name_of_variable)
        (ada_name_of_child, ada_path_expr_of_child)
        (ada_value_of_variable): Now returns std::string.  Use
        string_printf.
        (ada_value_of_child): Adjust.
        * break-catch-throw.c (check_status_exception_catchpoint): Adjust
        to use std::string.
        * breakpoint.c (watch_command_1): Adjust to use std::string.
        * c-lang.c (c_get_string): Adjust to use std::string.
        * c-typeprint.c (print_name_maybe_canonical): Use std::string.
        * c-varobj.c (varobj_is_anonymous_child): Use ==/!= std::string
        operators.
        (c_name_of_variable): Now returns a std::string.
        (c_describe_child): The 'cname' and 'cfull_expression' output
        parameters are now std::string pointers.  Adjust.
        (c_name_of_child, c_path_expr_of_child, c_value_of_variable)
        (cplus_number_of_children): Adjust to use std::string and
        string_printf.
        (cplus_name_of_variable): Now returns a std::string.
        (cplus_describe_child): The 'cname' and 'cfull_expression' output
        parameters are now std::string pointers.  Adjust.
        (cplus_name_of_child, cplus_path_expr_of_child)
        (cplus_value_of_variable): Now returns a std::string.
        * cp-abi.c (cplus_typename_from_type_info): Return std::string.
        * cp-abi.h (cplus_typename_from_type_info): Return std::string.
        (struct cp_abi_ops) <get_typename_from_type_info>: Return
        std::string.
        * cp-support.c (inspect_type): Use std::string.
        (cp_canonicalize_string_full, cp_canonicalize_string_no_typedefs)
        (cp_canonicalize_string): Return std::string and adjust.
        * cp-support.h (cp_canonicalize_string)
        (cp_canonicalize_string_no_typedefs, cp_canonicalize_string_full):
        Return std::string.
        * dbxread.c (read_dbx_symtab): Use std::string.
        * dwarf2read.c (dwarf2_canonicalize_name): Adjust to use std::string.
        * gdbcmd.h (lookup_struct_elt_type): Adjust to use std::string.
        * gnu-v3-abi.c (gnuv3_get_typeid): Use std::string.
        (gnuv3_get_typename_from_type_info): Return a std::string and
        adjust.
        (gnuv3_get_type_from_type_info): Adjust to use std::string.
        * guile/guile.c (gdbscm_execute_gdb_command): Adjust to use
        std::string.
        * infcmd.c (print_return_value_1): Adjust to use std::string.
        * linespec.c (find_linespec_symbols): Adjust to
        demangle_for_lookup API change.  Use std::string.
        * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_set_format)
        (mi_cmd_var_info_type, mi_cmd_var_info_path_expression)
        (mi_cmd_var_info_expression, mi_cmd_var_evaluate_expression)
        (mi_cmd_var_assign, varobj_update_one): Adjust to use std::string.
        * minsyms.c (lookup_minimal_symbol): Use std::string.
        * python/py-varobj.c (py_varobj_iter_next): Use new instead of
        XNEW.  vitem->name is a std::string now, adjust.
        * rust-exp.y (convert_ast_to_type, convert_name): Adjust to use
        std::string.
        * stabsread.c (define_symbol): Adjust to use std::string.
        * symtab.c (demangle_for_lookup): Now returns 'const char *'.  Add
        a demangle_result_storage parameter.  Use it for storage.
        (lookup_symbol_in_language)
        (lookup_symbol_in_objfile_from_linkage_name): Adjust to new
        demangle_for_lookup API.
        * symtab.h (struct demangle_result_storage): New type.
        (demangle_for_lookup): Now returns 'const char *'.  Add a
        demangle_result_storage parameter.
        * typeprint.c (type_to_string): Return std::string and use
        ui_file_as_string.
        * value.h (type_to_string): Change return type to std::string.
        * varobj-iter.h (struct varobj_item) <name>: Now a std::string.
        (varobj_iter_delete): Use delete instead of xfree.
        * varobj.c (create_child): Return std::string instead of char * in
        output parameter.
        (name_of_variable, name_of_child, my_value_of_variable): Return
        std::string instead of char *.
        (varobj_create, varobj_get_handle): Constify 'objname' parameter.
        Adjust to std::string fields.
        (varobj_get_objname): Return a const char * instead of a char *.
        (varobj_get_expression): Return a std::string.
        (varobj_list_children): Adjust to use std::string.
        (varobj_get_type): Return a std::string.
        (varobj_get_path_expr): Return a const char * instead of a char *.
        Adjust to std::string fields.
        (varobj_get_formatted_value, varobj_get_value): Return a
        std::string.
        (varobj_set_value): Change type of 'expression' parameter to
        std::string.  Use std::string.
        (install_new_value): Use std::string.
        (delete_variable_1): Adjust to use std::string.
        (create_child): Change the 'name' parameter to a std::string
        reference.  Swap it into the new item's name.
        (create_child_with_value): Swap item's name into the new child's
        name.  Use string_printf.
        (new_variable): Use new instead of XNEW.
        (free_variable): Don't xfree fields that are now std::string.
        (name_of_variable, name_of_child): Now returns std::string.
        (value_of_root): Adjust to use std::string.
        (my_value_of_variable, varobj_value_get_print_value): Return
        and use std::string.
        (varobj_value_get_print_value): Adjust to use ui_file_as_string
        and std::string.
        * varobj.h (struct varobj) <name, path_expr, obj_name,
        print_value>: Now std::string's.
        <name_of_variable, name_of_child, path_expr_of_child,
        value_of_variable>: Return std::string.
        (varobj_create, varobj_get_handle): Constify 'objname' parameter.
        (varobj_get_objname): Return a const char * instead of a char *.
        (varobj_get_expression, varobj_get_type): Return a std::string.
        (varobj_get_path_expr): Return a const char * instead of a char *.
        (varobj_get_formatted_value, varobj_get_value): Return a
        std::string.
        (varobj_set_value): Constify 'expression' parameter.
        (varobj_value_get_print_value): Return a std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * language.c (add_language): Use ui_file_as_string and adjust to
        use std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>
            Tom Tromey  <tom@tromey.com>

        * rust-lang.c (struct disr_info) <name>: Now a std::string.
        (rust_get_disr_info): Use ui_file_as_string and adjust to use
        std::string.
        (rust_val_print): Adjust to use std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * infrun.c (print_target_wait_results): Use ui_file_as_string and
        std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (type_as_string): Use ui_file_as_string and return
        std::string.
        (type_as_string_and_cleanup): Delete.
        (ada_lookup_struct_elt_type): Use type_as_string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * gdbarch.sh (verify_gdbarch): Use ui_file_as_string and
        std::string.
        * gdbarch.c: Regenerate.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * c-exp.y (OPERATOR NEW): Adjust to use ui_file_as_string and
        std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * c-lang.h (c_compute_program): Now returns std::string.
        * compile/compile-internal.h (class compile_file_names): New
        class.
        * compile/compile-object-load.c (compile_object_load): Replace
        object_file and source_file parameters with a compile_file_names
        parameter.  Adjust.
        * compile-object-load.h: Include "compile-internal.h".
        (compile_object_load): Replace object_file and source_file
        parameters with a compile_file_names parameter.
        * compile/compile-c-support.c (c_compute_program): Now returns a
        std::string.  Use ui_file_as_string.
        * compile/compile.c (get_new_file_names): Remove parameters and
        return a compile_file_names instead.
        (compile_to_object): Now returns a compile_file_names.  Use
        ui_file_as_string.
        (eval_compile_command): Use compile_file_names.
        * language.h (struct language_defn) <la_compute_program>: Now
        returns std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * cli/cli-setshow.c (do_show_command): Adjust to use
        ui_file_as_string and std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * remote.c (escape_buffer): Use ui_file_as_string and return
        std::string.
        (putpkt_binary, read_frame): Adjust to use std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * python/py-arch.c (archpy_disassemble): Use ui_file_as_string and
        std::string.
        * python/py-breakpoint.c (bppy_get_commands): Use
        ui_file_as_string and std::string.
        * python/py-frame.c (frapy_str): Likewise.
        * python/py-type.c (typy_str): Likewise.
        * python/py-unwind.c (unwind_infopy_str): Likewise.
        * python/py-value.c (valpy_str): Likewise.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * printcmd.c (eval_command): Use ui_file_as_string and
        std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * top.c (quit_confirm): Use ui_file_as_string and std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * gdbcmd.h (execute_command_to_string): Now returns std::string.
        (lookup_struct_elt_type): Adjust to use std::string.
        * top.c (execute_command_to_string): Use ui_file_as_string and
        return std::string.
        * guile/guile.c (gdbscm_execute_gdb_command): Adjust to use
        std::string.
        * python/python.c (execute_gdb_command): Adjust to use
        std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
        ui_file_as_string and adjust to use std::string.
        * guile/scm-disasm.c (gdbscm_arch_disassemble): Likewise.
        * guile/scm-frame.c (frscm_print_frame_smob): Likewise.
        * guile/scm-type.c (tyscm_type_name): Use ui_file_as_string and
        adjust to use std::string.  Throw exception directly instead of
        returning it in EXCP output parameter.
        (tyscm_print_type_smob, gdbscm_type_print_name): Adjust to
        tyscm_type_name interface change.
        * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
        Use ui_file_as_string and std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * arm-tdep.c (_initialize_arm_tdep): Use ui_file_as_string and
        std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * utils.c (error_stream): Use ui_file_as_string and std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * ui-out.c (ui_out_field_stream): Use ui_file_as_string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * ada-valprint.c (ada_print_floating): Use ui_file_as_string and
        std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * xtensa-tdep.c (xtensa_verify_config): Use ui_file_as_string and
        std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * dwarf2read.c (dwarf2_compute_name): Use ui_file_as_string and
        std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * mi/mi-main.c (print_variable_or_computed): Constify 'expression'
        parameter.
        (mi_cmd_trace_frame_collected): Call encode_actions instead of
        encode_actions_and_make_cleanup.  Adjust to use std::vector.
        * tracepoint.c (memrange_cmp): Delete.
        (memrange_comp): New.
        (memrange_sortmerge): Take a memrange vector as parameter instead
        of a collection_list.  Use std::sort instead of qsort.
        (add_register): Now a method of collection_list.  Adjust to m_
        prefix of data fields.
        (add_memrange): Now a method of collection_list.  Adjust to m_
        prefix of data fields.  Adjust to use std::vector.
        (collect_symbol): Now a method of collection_list.  Adjust to m_
        prefix of data fields.
        (do_collect_symbol): Adjust.  Call add_wholly_collected instead of
        accessing the vector directly.
        (collection_list::add_wholly_collected): New.
        (add_local_symbols): Now a method of collection_list.
        (add_static_trace_data): Now a method of collection_list.  Adjust
        to use bool.
        (clear_collection_list, do_clear_collection_list): Delete.
        (init_collection_list): Delete.
        (collection_list::collection_list): New.
        (collection_list::~collection_list): New.
        (stringify_collection_list): Rename to ...
        (collection_list::stringify): ... this and adjust to being a
        method of collection_list.  Adjust to use of std::vector.
        (append_exp): Now a method of collection_list.  Use
        ui_file_as_string.  Adjust to std::vector.
        (collection_list::finish): New.
        (encode_actions_1): Adjust.
        (encode_actions_and_make_cleanup): Rename to ...
        (encode_actions)... this.  No longer returns a cleanup.  No longer
        call init_collection_list nor install do_clear_collection_list
        cleanups.  Call collection_list::finish instead of
        memrange_sortmerge directly.
        (encode_actions_rsp): Adjust to call encode_actions instead of
        encode_actions_and_make_cleanup.  Adjust to method renames.
        (add_aexpr): Now a method of collection_list.
        * tracepoint.h: Include <vector> and <string>.
        (struct memrange): Add constructors.
        (struct collection_list): Now a class.
        (class collection_list) <collection_list, ~collection_list,
        add_wholly_collected, append_exp, add_aexpr, add_register,
        add_memrange, collect_symbol, add_local_symbols,
        add_static_trace_data, finish, stringify, wholly_collected, and
        computed>: New methods.
        <regs_mask>: Rename to ...
        <m_regs_mask>: ... this.
        <listsize, next_memrange, list>: Delete fields.
        <m_memranges>: New field.
        <aexpr_listsize, next_aexpr_elt, aexpr_list>: Delete fields.
        <m_aexprs>: New field.
        <strace_data>: Rename to ...
        <m_strace_data>: ... this.  Now a bool.
        <wholly_collected>: Rename to ...
        <m_wholly_collected>: ... this.  Now a std::vector<std::string>.
        <computed>: Rename to ...
        <m_computed>: ... this.  Now a std::vector<std::string>.
        (encode_actions_and_make_cleanup): Delete declaration.
        (encode_actions): New declaration.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * ui-file.c (do_ui_file_as_string, ui_file_as_string): New
        functions.
        * ui-file.h: Include <string>.
        (ui_file_as_string): New declaration.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (ada_read_renaming_var_value): Use expression_up.
        (struct ada_catchpoint_location) <excep_cond_expr>: Now an
        expression_up.
        (ada_catchpoint_location_dtor): Reset excep_cond_expr instead of
        using xfree.
        (create_excep_cond_exprs): Use expression_up and gdb::move.
        (allocate_location_exception): Use new instead of XNEW.
        (should_stop_exception): Likewise.  Adjust to use expression_up.
        (create_ada_exception_catchpoint): Use new instead of XNEW.
        * ax-gdb.c (agent_eval_command_one): Use expression_up instead of
        cleanups.
        (maint_agent_printf_command): Use expression_up.
        * break-catch-sig.c (create_signal_catchpoint): Use new instead of
        XNEW.
        * break-catch-syscall.c (create_syscall_event_catchpoint):
        Likewise.
        * break-catch-throw.c (handle_gnu_v3_exceptions): Use new instead
        of XCNEW.  Use gdb::unique_ptr instead of cleanups.
        * breakpoint.c (set_breakpoint_condition, update_watchpoint)
        (parse_cmd_to_aexpr, watchpoint_check)
        (bpstat_check_breakpoint_conditions, watchpoint_locations_match):
        Adjust to use expression_up.
        (init_bp_location): Adjust.
        (free_bp_location): Use delete instead of xfree.
        (set_raw_breakpoint_without_location, set_raw_breakpoint)
        (add_solib_catchpoint, create_fork_vfork_event_catchpoint)
        (new_single_step_breakpoint, create_breakpoint_sal): Use new
        instead of XNEW.
        (find_condition_and_thread): Adjust to use expression_up.
        (create_breakpoint): Use new instead of XNEW.
        (dtor_watchpoint): Don't xfree expression pointers, they're
        unique_ptr's now.
        (insert_watchpoint, remove_watchpoint): Adjust.
        (watch_command_1): Use expression_up.  Use new instead of XCNEW.
        (catch_exec_command_1): Use new instead of XNEW.
        (bp_location_dtor): Don't xfree expression pointers, they're
        unique_ptr's now.
        (base_breakpoint_allocate_location)
        (strace_marker_create_breakpoints_sal): Use new instead of XNEW.
        (delete_breakpoint): Use delete instead of xfree.
        * breakpoint.h (struct bp_location) <cond>: Now an
        unique_ptr<expression> instead of a raw pointer.
        (struct watchpoint) <exp, cond_exp>: Likewise.
        * cli/cli-script.c (execute_control_command): Use expression_up
        instead of cleanups.
        * dtrace-probe.c (dtrace_process_dof_probe): Use expression_up.
        * eval.c (parse_and_eval_address, parse_and_eval_long)
        (parse_and_eval, parse_to_comma_and_eval, parse_and_eval_type):
        Use expression_up instead of cleanups.
        * expression.h (expression_up): New typedef.
        (parse_expression, parse_expression_with_language, parse_exp_1):
        Change return type to expression_up.
        * mi/mi-main.c (mi_cmd_data_evaluate_expression)
        (print_variable_or_computed): Use expression_up.
        * objc-lang.c (print_object_command): Use expression_up instead of
        cleanups.
        * parse.c (parse_exp_1, parse_exp_in_context)
        (parse_exp_in_context_1, parse_expression)
        (parse_expression_with_language): Return an expression_up instead
        of a raw pointer.
        (parse_expression_for_completion): Use expression_up.
        * printcmd.c (struct display) <exp>: Now an expression_up instead
        of a raw pointer.
        (print_command_1, output_command_const, set_command, x_command):
        Use expression_up instead of cleanups.
        (display_command): Likewise.  Use new instead of XNEW.
        (free_display): Use delete instead of xfree.
        (do_one_display): Adjust to use expression_up.
        * remote.c (remote_download_tracepoint): Likewise.
        * stack.c (return_command): Likewise.
        * tracepoint.c (validate_actionline, encode_actions_1): Use
        expression_up instead of cleanups.
        * typeprint.c (whatis_exp, maintenance_print_type): Likewise.
        * value.c (init_if_undefined_command): Likewise.
        * varobj.c (struct varobj_root) <exp>: Now an expression_up
        instead of a raw pointer.
        (varobj_create): Adjust.
        (varobj_set_value): Use an expression_up instead of cleanups.
        (new_root_variable): Use new instead of XNEW.
        (free_variable): Use delete instead of xfree.
        (value_of_root_1): Use std::swap.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * cli/cli-script.c (execute_control_command): Use std::string
        instead of cleanups.
        (locate_arg): Constify return type.
        (insert_args): Constify paremeter.  Simplify using std::string.
        Return a std::string.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (struct commands_info) <arg>: Constify.
        (commands_command_1): Constify 'arg' parameter.  Use std::string
        and string_printf.
        (commands_from_control_command): Constify 'arg' parameter.
        (map_breakpoint_numbers): Constify 'args' parameter.
        * breakpoint.h (commands_from_control_command): Constify 'arg'
        parameter.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * cli/cli-script.c (execute_control_command): Assume insert_args
        never returns NULL.
        (insert_args): Assume xmalloc never returns NULL.

2016-11-08  Pedro Alves  <palves@redhat.com>

        * Makefile.in (COMMON_OBS): Add utils-selftests.o.
        * common/common-utils.c (string_printf): New function.
        * common/common-utils.h: Include <string>.
        (string_printf): Declare.
        * utils-selftests.c: New file.

2016-11-08  Yao Qi  <yao.qi@linaro.org>

        * aarch64-tdep.c (aarch64_software_single_step): Return
        VEC (CORE_ADDR) *.  Return NULL instead of 0.  Don't call
        insert_single_step_breakpoint.
        * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
        (alpha_software_single_step): Likewise.
        * alpha-tdep.h (alpha_software_single_step): Update declaration.
        * arm-linux-tdep.c (arm_linux_software_single_step): Return
        VEC (CORE_ADDR) *.  Return NULL instead of 0.
        * arm-tdep.c (arm_software_single_step): Return NULL instead of 0.
        * arm-tdep.h (arm_software_single_step): Update declaration.
        * breakpoint.c (insert_single_step_breakpoints): New function.
        * breakpoint.h (insert_single_step_breakpoints): Declare.
        * cris-tdep.c (cris_software_single_step): Return
        VEC (CORE_ADDR) *.  Don't call insert_single_step_breakpoint.
        * gdbarch.sh (software_single_step): Change it to return
        VEC (CORE_ADDR) *.
        * gdbarch.c, gdbarch.h: Regenerated.
        * infrun.c (maybe_software_singlestep): Adjust.
        * mips-tdep.c (mips_deal_with_atomic_sequence): Return
        VEC (CORE_ADDR) *.  Don't call insert_single_step_breakpoint.
        (micromips_deal_with_atomic_sequence): Likewise.
        (deal_with_atomic_sequence): Likewise.
        (mips_software_single_step): Likewise.
        * mips-tdep.h (mips_software_single_step): Update declaration.
        * moxie-tdep.c (moxie_software_single_step): Likewise.
        * nios2-tdep.c (nios2_software_single_step): Likewise.
        * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update
        declaration.
        * record-full.c (record_full_resume): Adjust.
        (record_full_wait_1): Likewise.
        * rs6000-aix-tdep.c (rs6000_software_single_step): Return
        VEC (CORE_ADDR) *.  Don't call insert_single_step_breakpoint.
        * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Return
        VEC (CORE_ADDR) *.  Don't call insert_single_step_breakpoint.
        * s390-linux-tdep.c (s390_software_single_step): Likewise.
        * sparc-tdep.c (sparc_software_single_step): Likewise.
        * spu-tdep.c (spu_software_single_step): Likewise.
        * tic6x-tdep.c (tic6x_software_single_step): Likewise.

2016-11-08  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_software_single_step): Write
        adjusted address back to vector.  Call insert_single_step_breakpoint
        in a new loop.
        * arm-tdep.c (arm_software_single_step): Likewise.

2016-11-08  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_software_single_step): Don't
        call arm_insert_single_step_breakpoint, call
        insert_single_step_breakpoint instead.
        * arm-tdep.c (arm_insert_single_step_breakpoint): Remove.
        (arm_software_single_step): Don't call
        arm_insert_single_step_breakpoint, call
        insert_single_step_breakpoint instead.
        * arm-tdep.h (arm_insert_single_step_breakpoint): Remove
        declaration.

2016-11-08  Cordian A. Daniluk  <th3c0r1uk@gmail.com>

        PR breakpoints/20739
        * breakpoint.c (check_fast_tracepoint_sals): Don't print duplicate
        0x prefix.

2016-11-08  Yao Qi  <yao.qi@linaro.org>

        * rust-lang.c (val_print_struct): Fix indentation.

2016-11-08  Lionel Flandrin  <lionel@svkt.org>

        * remote.c (process_g_packet): Detect truncated registers in 'g'
        packets and raise an error.

2016-11-07  Doug Evans  <dje@google.com>

        * guile/scm-value.c (gdbscm_value_field): Fix call to value_struct_elt.
        * python/py-value.c (valpy_getitem): Ditto.

2016-11-07  Doug Evans  <dje@google.com>

        * i386-tdep.c (i386_gdbarch_init): Add comments.

2016-11-07  Doug Evans  <dje@google.com>

        * python/py-unwind.c (unwind_infopy_str): Fix use of VEC_iterate.

2016-11-07  Doug Evans  <dje@google.com>

        * configure.tgt (x86_64-*-elf*): Remove i386bsd-tdep.o.

2016-11-04  Simon Marchi  <simon.marchi@polymtl.ca>

        * maint.c (scoped_command_stats::scoped_command_stats): Fix typo.
        * ppcnbsd-tdep.c (_initialize_ppcnbsd_tdep): Likewise.
        * ppcobsd-tdep.c (_initialize_ppcobsd_tdep): Likewise.
        * ui-out.c (ui_out_new): Likewise.
        * utils.c (init_page_info): Likewise.
        (reset_prompt_for_continue_wait_time): Likewise.
        * windows-nat.c (windows_init_thread_list): Likewise.
        * xtensa-tdep.c (call0_analyze_prologue): Likewise.

2016-10-29  Manish Goregaokar  <manish@mozilla.com>

        * rust-exp.y: Parse `sizeof(exp)` as `UNOP_SIZEOF`.

2016-10-28  Manish Goregaokar  <manish@mozilla.com>

        * rust-lang.c (rust_union_is_untagged): Add function to check if a
        union is an untagged union.
        (rust_val_print): Handle printing of untagged union values.
        (rust_print_type): Handle printing of untagged union types.
        (rust_evaluate_subexp): Handle evaluating field access on untagged
        unions.

2016-10-27  Manish Goregaokar  <manish@mozilla.com>

        * rust-lang.c (rust_get_disr_info): Treat univariant enums without
        discriminants as encoded enums with a real field.
        * rust-lang.c (rust_evaluate_subexp): Handle field access on
        encoded struct-like enums.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * Makefile.in (.y.c): Replace YY_NULL with YY_NULLPTR.

2016-11-03  Yao Qi  <yao.qi@linaro.org>
            Pedro Alves <palves@redhat.com>

        * aarch64-tdep.c (aarch64_default_breakpoint): Change it to
        constexpr.  Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (aarch64_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * alpha-tdep.c (break_insn): Rename to alpha_break_insn.
        Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (alpha_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * arc-tdep.c (arc_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove.
        (struct bp_manipulation): New.
        (SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove.
        (struct bp_manipulation_endian): New.
        (BP_MANIPULATION): New.
        (BP_MANIPULATION_ENDIAN): New.
        * arm-tdep.c (arm_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * avr-tdep.c (avr_break_insn): Change it constexpr.
        (avr_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * bfin-tdep.c (bfin_gdbarch_init): Likewise.
        * cris-tdep.c (cris_gdbarch_init): Likewise.
        * frv-tdep.c (breakpoint): Rename it to frv_break_insn, and
        change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (frv_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and
        change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (ft32_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * h8300-tdep.c (breakpoint): Rename it to h8300_break_insn.
        Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (h8300_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * hppa-tdep.c (breakpoint): Rename it to h8300_break_insn.
        Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (hppa_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * i386-tdep.c (break_insn): Rename it to i386_break_insn.
        Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (i386_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * iq2000-tdep.c (iq2000_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and
        change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (lm32_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change
        its type to constexpr.  Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (m32c_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * m32r-tdep.c (m32r_gdbarch_init): Likewise.
        * m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and
        change its type to constexpr.
        Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change
        its type to constexpr.  Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (m68k_gdbarch_init):  Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change
        its type to constexpr.  Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (m88k_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * mep-tdep.c (breakpoint): Rename it to mep_break_insn and change
        its type to constexpr.  Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (mep_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * microblaze-tdep.c (break_insn): Rename it to
        microblaze_break_insn and change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (microblaze_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * mips-tdep.c (mips_gdbarch_init): Likewise.
        * mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and
        change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (mn10300_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and
        change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (moxie_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * msp430-tdep.c (breakpoint): Rename it to msp430_break_insn
        and change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (msp430_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * mt-tdep.c (mt_gdbarch_init): Likewise.
        * nds32-tdep.c (break_insn): Rename it to nds32_break_insn
        and change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (nds32_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * nios2-tdep.c (nios2_gdbarch_init): Likewise.
        * rl78-tdep.c (breakpoint): Rename it to rl78_break_ins
        and change its type to rl78_break_insn.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (rl78_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * rs6000-tdep.c (big_breakpoint): Change its type to
        constexpr.
        (little_breakpoint): Likewise.
        Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN.
        (rs6000_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * rx-tdep.c (breakpoint): Rename it to rx_break_insn and
        change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (rx_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn
        and change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION
        (s390_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * score-tdep.c (score_gdbarch_init): Likewise.
        * sh-tdep.c (sh_gdbarch_init): Likewise.
        * sh64-tdep.c (sh64_gdbarch_init): Likewise.
        * sparc-tdep.c (break_insn): Rename it to sparc_break_insn
        and change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (sparc32_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * spu-tdep.c (breakpoint): Rename it to spu_break_insn and change
        its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (spu_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
        * tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn
        and change its type to constexpr.  Don't use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (tilegx_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * v850-tdep.c (v850_gdbarch_init): Likewise.
        * vax-tdep.c (break_insn): Rename it to vax_break_insn and
        change its type to constexpr.
        Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (vax_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * xstormy16-tdep.c (breakpoint): Rename it to
        xstormy16_break_insn and change its type to constexpr.
        Don't use GDBARCH_BREAKPOINT_MANIPULATION.
        (xstormy16_gdbarch_init): Don't use
        SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * xtensa-tdep.c (xtensa_gdbarch_init): Likewise.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_override_mode): Remove.
        (arm_pc_is_thumb): Update.
        (arm_insert_single_step_breakpoint): Update.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * arch-utils.c (default_breakpoint_kind_from_current_state):
        New function.
        * arch-utils.h (default_breakpoint_kind_from_current_state):
        Declare.
        * arm-tdep.c (arm_breakpoint_kind_from_current_state): New
        function.
        (arm_gdbarch_init): Call
        set_gdbarch_breakpoint_kind_from_current_state.
        * breakpoint.c (breakpoint_kind): Call
        gdbarch_breakpoint_kind_from_current_state for single step
        breakpoint.  Update comments.
        * gdbarch.sh (breakpoint_kind_from_current_state): New.
        * gdbarch.c, gdbarch.h: Regenerate.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * arch-utils.c (default_breakpoint_from_pc): New function.
        * arch-utils.h (GDBARCH_BREAKPOINT_FROM_PC): Remove.
        (GDBARCH_BREAKPOINT_MANIPULATION): Don't use
        GDBARCH_BREAKPOINT_FROM_PC.
        (SET_GDBARCH_BREAKPOINT_MANIPULATION): Don't call
        set_gdbarch_breakpoint_from_pc.
        (default_breakpoint_from_pc): Remove declaration.
        * gdbarch.sh (breakpoint_from_pc): Add its default implementation.
        * gdbarch.c, gdbarch.h: Regenerate.
        * arm-tdep.c: Don't use GDBARCH_BREAKPOINT_FROM_PC.
        * arc-tdep.c, bfin-tdep.c, cris-tdep.c, iq2000-tdep.c: Likewise.
        * m32r-tdep.c, mips-tdep.c, mt-tdep.c: Likewise.
        * nios2-tdep.c, score-tdep.c, sh-tdep.c: Likewise.
        * sh64-tdep.c, tic6x-tdep.c, v850-tdep.c, xtensa-tdep.c: Likewise.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * arch-utils.c (default_remote_breakpoint_from_pc): Remove.
        * arch-utils.h (default_remote_breakpoint_from_pc): Remove.
        * arm-tdep.c (arm_remote_breakpoint_from_pc): Remove.
        (arm_gdbarch_init): Don't call
        set_gdbarch_remote_breakpoint_from_pc.
        * gdbarch.sh (remote_breakpoint_from_pc): Remove.
        * gdbarch.c, gdbarch.h: Regenerate.
        * mips-tdep.c (mips_remote_breakpoint_from_pc): Remove.
        (mips_gdbarch_init): Don't call
        set_gdbarch_remote_breakpoint_from_pc.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * breakpoint.h (struct bp_target_info) <placed_size>: Remove.
        <kind>: New field.
        Update all users.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define
        breakpoint_kind_from_pc and sw_breakpoint_from_kind.
        (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise.
        (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call
        set_gdbarch_breakpoint_kind_from_pc and
        set_gdbarch_sw_breakpoint_from_kind.
        * arm-tdep.c: Add comments.
        * bfin-tdep.c: Likewise.
        * breakpoint.c (breakpoint_kind): New function.
        (insert_bp_location): Set target_info.placed_size and
        target_info.placed_address.
        (bkpt_insert_location): Likewise.
        * cris-tdep.c: Add comments.
        * gdbarch.sh (breakpoint_kind_from_pc): New.
        (sw_breakpoint_from_kind): New.
        * gdbarch.c, gdbarch.h: Regenerated.
        * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set
        bp_tgt->placed_size.
        (ia64_memory_remove_breakpoint): Don't assert
        bp_tgt->placed_size.
        (ia64_breakpoint_kind_from_pc): New function.
        (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc.
        * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set
        bp_tgt->placed_size.
        * mem-break.c (default_memory_insert_breakpoint): Don't set
        bp_tgt->placed_size.  Call gdbarch_sw_breakpoint_from_kind.
        (default_memory_remove_breakpoint): Call
        gdbarch_sw_breakpoint_from_kind.
        (memory_validate_breakpoint): Don't check bp_tgt->placed_size.
        * mips-tdep.c: Add comments.
        * mt-tdep.c: Likewise.
        * nios2-tdep.c: Likewise.
        * record-full.c (record_full_insert_breakpoint): Don't call
        gdbarch_breakpoint_from_pc.  Don't set bp_tgt->placed_address
        and bp_tgt->placed_size.
        * remote.c (remote_insert_breakpoint): Don't call
        gdbarch_remote_breakpoint_from_pc.  Use bp_tgt->placed_size.
        Don't set bp_tgt->placed_address and bp_tgt->placed_size.
        (remote_insert_hw_breakpoint): Likewise.
        * score-tdep.c: Likewise.
        * sh-tdep.c: Likewise.
        * tic6x-tdep.c: Likewise.
        * v850-tdep.c: Likewise.
        * xtensa-tdep.c: Likewise.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * arch-utils.h (GDBARCH_BREAKPOINT_FROM_PC): New macro.
        (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): New macro.
        * arm-tdep.c (arm_breakpoint_from_pc): Remove.
        (arm_breakpoint_kind_from_pc): New function.
        (arm_sw_breakpoint_from_kind): New function.
        (arm_breakpoint_from_pc): Call arm_breakpoint_kind_from_pc
        and arm_sw_breakpoint_from_kind.
        Use GDBARCH_BREAKPOINT_FROM_PC.
        (arm_remote_breakpoint_from_pc): Call
        arm_breakpoint_kind_from_pc.
        (arm_gdbarch_init): Replace set_gdbarch_breakpoint_from_pc
        with SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * arc-tdep.c: Likewise.
        * bfin-tdep.c: Likewise.
        * cris-tdep.c: Likewise.
        * iq2000-tdep.c: Likewise.
        * m32r-tdep.c: Likewise.
        * mips-tdep.c: Likewise.
        * mt-tdep.c: Likewise.
        * nios2-tdep.c: Likewise.
        * rs6000-tdep.c: Likewise.
        * score-tdep.c: Likewise.
        * sh-tdep.c: Likewise.
        * sh64-tdep.c: Likewise.
        * tic6x-tdep.c: Likewise.
        * v850-tdep.c: Likewise.
        * xtensa-tdep.c: Likewise.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * mips-tdep.c (mips_breakpoint_kind): New enum.
        (mips_breakpoint_from_pc): Use it.
        (mips_remote_breakpoint_from_pc): Likewise.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): New macro.
        (SET_GDBARCH_BREAKPOINT_MANIPULATION): New macro.
        aarch64-tdep.c (aarch64_breakpoint_from_pc): Remove.  Use
        GDBARCH_BREAKPOINT_MANIPULATION.
        (aarch64_gdbarch_init): Replace set_gdbarch_breakpoint_from_pc
        with SET_GDBARCH_BREAKPOINT_MANIPULATION.
        * alpha-tdep.c: Likewise.
        * avr-tdep.c: Likewise.
        * frv-tdep.c: Likewise.
        * ft32-tdep.c: Likewise.
        * h8300-tdep.c: Likewise.
        * hppa-tdep.c: Likewise.
        * i386-tdep.c: Likewise.
        * lm32-tdep.c: Likewise.
        * m32c-tdep.c: Likewise.
        * m68hc11-tdep.c: Likewise.
        * m68k-tdep.c: Likewise.
        * m88k-tdep.c: Likewise.
        * mep-tdep.c: Likewise.
        * microblaze-tdep.c: Likewise.
        * mn10300-tdep.c: Likewise.
        * moxie-tdep.c: Likewise.
        * msp430-tdep.c: Likewise.
        * rl78-tdep.c: Likewise.
        * rx-tdep.c: Likewise.
        * s390-linux-tdep.c: Likewise.
        * sparc-tdep.c: Likewise.
        * spu-tdep.c: Likewise.
        * tilegx-tdep.c: Likewise.
        * vax-tdep.c: Likewise.
        * xstormy16-tdep.c: Likewise.

2016-11-03  Yao Qi  <yao.qi@linaro.org>

        * mem-break.c (default_memory_insert_breakpoint): Don't check
        'bp' against NULL.
        * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint):
        Likewise.
        * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.

2016-11-02  Tom Tromey  <tom@tromey.com>

        * dwarf2loc.c (dwarf_evaluate_loc_desc::get_base_type): Rename
        from impl_get_base_type.  Rewrite.
        (struct dwarf_expr_baton): Remove.
        (dwarf_evaluate_loc_desc::push_dwarf_reg_entry_value): Save and
        restore more fields.
        (symbol_needs_eval_context::get_frame_pc): New method.
        * dwarf2expr.h (dwarf_expr_context::get_base_type): Now public,
        virtual.
        (dwarf_expr_context::impl_get_base_type): Remove.
        * dwarf2expr.c (dwarf_expr_context::get_base_type): Remove.

2016-10-31  Maciej W. Rozycki  <macro@imgtec.com>

        * configure.ac <mips-sgi-irix5*>: Remove <sys/proc.h> _KMEMUSER
        workaround.
        * configure: Regenerate.
        * config.in: Regenerate.

2016-10-31  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (mips_r3041_reg_names): Remove.
        (mips_breakpoint_from_pc): Remove IDT and PMON breakpoint
        encodings.

2016-10-31  Maciej W. Rozycki  <macro@imgtec.com>

        * defs.h (gdb_osabi): Remove GDB_OSABI_IRIX enum value.
        * osabi.c (gdb_osabi_names): Remove "Irix" entry.
        * mips-tdep.c (mips_irix_reg_names): Remove.
        (mips_register_type): Remove GDB_OSABI_IRIX code.
        (mips_pseudo_register_type): Likewise.
        (mips_breakpoint_from_pc): Likewise.
        (mips_gdbarch_init): Likewise.

2016-10-29  Pedro Alves  <palves@redhat.com>

        * NEWS: Clarify C++ requirement.

2016-10-29  Pedro Alves  <palves@redhat.com>

        * NEWS: Adjust to mention C++11 requirement.

2016-10-29  Eli Zaretskii  <eliz@gnu.org>

        * NEWS: Mention support for redirection on MS-Windows.

        * windows-nat.c (redir_open, redir_set_redirection)
        (redirect_inferior_handles) [!__CYGWIN__]: New functions.
        (windows_create_inferior) [!__CYGWIN__]: Use
        'redirect_inferior_handles' to redirect standard handles of the
        debuggee if the command line requests that.

2016-10-28  Pedro Alves  <palves@redhat.com>

        * Makefile.in (CXX_DIALECT): Get from configure.
        (COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
        (FLAGS_TO_PASS): Pass CXX_DIALECT.
        * acinclude.m4: Include ax_cxx_compile_stdcxx.m4.
        * ax_cxx_compile_stdcxx.m4: Add FSF copyright header.  Set and
        AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP.
        * configure.ac: Call AX_CXX_COMPILE_STDCXX.
        * config.in: Regenerate.
        * configure: Regenerate.

2016-10-28  Pedro Alves  <palves@redhat.com>

        * ax_cxx_compile_stdcxx.m4: New file.

2016-10-28  Pedro Alves  <palves@redhat.com>

        * maint.c (scoped_command_stats::scoped_command_stats): Clear
        m_space_enabled, m_time_enabled and m_symtab_enabled.

2016-10-28  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c (bfun_s): New typedef.
        (ftrace_update_caller): Print caller in debug dump.
        (ftrace_get_caller, ftrace_match_backtrace, ftrace_fixup_level)
        (ftrace_compute_global_level_offset, ftrace_connect_bfun)
        (ftrace_connect_backtrace, ftrace_bridge_gap, btrace_bridge_gaps): New.
        (btrace_compute_ftrace_bts): Pass vector of gaps.  Collect gaps.
        (btrace_compute_ftrace_pt): Likewise.
        (btrace_compute_ftrace): Split into this, ...
        (btrace_compute_ftrace_1): ... this, and ...
        (btrace_finalize_ftrace): ... this.  Call btrace_bridge_gaps.

2016-10-28  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c (ftrace_new_return): Start from the previous function's
        level if we can't find a matching call for a return.

2016-10-28  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c (ftrace_update_function): Update tail call heuristic.

2016-10-28  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c (btrace_compute_ftrace_bts, ftrace_add_pt): Allow
        leading gaps.
        * record-btrace.c (record_btrace_single_step_forward)
        (record_btrace_single_step_backward): Jump back to last
        instruction if step ends at a gap.
        (record_btrace_goto_begin): Skip gaps.

2016-10-28  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c (ftrace_add_pt): Fix gap indication.  Add warning for non-
        contiguous trace and overflow.  Rephrase trace decode warning and print
        instruction number.  Remove dead gaps warning.
        (btrace_compute_ftrace_bts): Rephrase warnings and print instruction
        number.

2016-10-25  Sandra Loosemore  <sandra@codesourcery.com>
            Luis Machado  <lgustavo@codesourcery.com>
            Pedro Alves  <palves@redhat.com>

        PR gdb/20569
        * exceptions.c (exception_print_same): Moved here from exec.c.
        * exceptions.h (exception_print_same): Declare.
        * exec.h: Include "symfile-add-flags.h".
        (try_open_exec_file): New declaration.
        * exec.c (exception_print_same): Moved to exceptions.c.
        (try_open_exec_file): New function.
        (exec_file_locate_attach): Rename exec_file and full_exec_path
        variables to avoid confusion between target and host pathnames.
        Move pathname processing logic to exec_file_find.  Do not return
        early if pathname lookup fails; Call try_open_exec_file.
        * infrun.c (follow_exec): Split and rename execd_pathname variable
        to avoid confusion between target and host pathnames.  Warn if
        pathname lookup fails.  Pass target pathname to
        target_follow_exec, not hostpathname.  Call try_open_exec_file.
        * main.c (symbol_file_add_main_adapter): New function.
        (captured_main_1): Use it.
        * solib-svr4.c (open_symbol_file_object): Adjust to pass
        symfile_add_flags to symbol_file_add_main.
        * solib.c (exec_file_find): Incorporate fallback logic for relative
        pathnames formerly in exec_file_locate_attach.
        * symfile.c (symbol_file_add_main, symbol_file_add_main_1):
        Replace 'from_tty' parameter with a symfile_add_file.
        (symbol_file_command): Adjust to pass symfile_add_flags to
        symbol_file_add_main.
        * symfile.h (symbol_file_add_main): Replace 'from_tty' parameter
        with a symfile_add_file.

2016-10-26  Pedro Alves  <palves@redhat.com>

        * coffread.c (coff_symfile_read): Use symfile_add_flags.
        * dbxread.c (dbx_symfile_read): Ditto.
        * elfread.c (elf_symfile_read): Ditto.
        * inferior.h: Include symfile-add-flags.h.
        (struct inferior) <symfile_flags>: Now symfile_add_flags.
        * machoread.c (macho_add_oso_symfile, macho_symfile_read_all_oso)
        (macho_symfile_read, mipscoff_symfile_read): Use
        symfile_add_flags.
        * objfile-flags.h: New file.
        * objfiles.c (allocate_objfile): Use objfile_flags.
        * objfiles.h: Include objfile-flags.h.
        (struct objfile) <flags>: Now an objfile_flags.
        (OBJF_REORDERED, OBJF_SHARED, OBJF_READNOW, OBJF_USERLOADED)
        (OBJF_PSYMTABS_READ, OBJF_MAINLINE, OBJF_NOT_FILENAME): Delete.
        Converted to an enum-flags in objfile-flags.h.
        (allocate_objfile): Use objfile_flags.
        * python/py-objfile.c (objfpy_add_separate_debug_file): Remove
        unnecessary local.
        * solib.c (solib_read_symbols, solib_add)
        (reload_shared_libraries_1): Use symfile_add_flags.
        * solib.h: Include "symfile-add-flags.h".
        (solib_read_symbols): Use symfile_add_flags.
        * symfile-add-flags.h: New file.
        * symfile-debug.c (debug_sym_read): Use symfile_add_flags.
        * symfile-mem.c (symbol_file_add_from_memory): Use
        symfile_add_flags.
        * symfile.c (read_symbols, syms_from_objfile_1)
        (syms_from_objfile, finish_new_objfile): Use symfile_add_flags.
        (symbol_file_add_with_addrs): Use symfile_add_flags and
        objfile_flags.
        (symbol_file_add_separate): Use symfile_add_flags.
        (symbol_file_add_from_bfd, symbol_file_add): Use symfile_add_flags
        and objfile_flags.
        (symbol_file_add_main_1): : Use objfile_flags.  Fix add_flags vs
        flags confusion.
        (symbol_file_command): Use objfile_flags.
        (add_symbol_file_command): Use symfile_add_flags and
        objfile_flags.
        (clear_symtab_users): Use symfile_add_flags.
        * symfile.h: Include "symfile-add-flags.h" and "objfile-flags.h".
        (struct sym_fns) <sym_read>: Use symfile_add_flags.
        (clear_symtab_users): Use symfile_add_flags.
        (enum symfile_add_flags): Delete, moved to symfile-add-flags.h and
        converted to enum-flags.
        (symbol_file_add, symbol_file_add_from_bfd)
        (symbol_file_add_separate): Use symfile_add_flags.
        * xcoffread.c (xcoff_initial_scan): Use symfile_add_flags.

2016-10-26  Pedro Alves  <palves@redhat.com>

        * inferior.h (ALL_NON_EXITED_INFERIORS): New macro.
        * infrun.c (do_target_resume): Call target_commit_resume.
        (proceed): Defer target_commit_resume while looping over threads,
        resuming them.  Call target_commit_resume at the end.
        * record-btrace.c (record_btrace_commit_resume): New function.
        (init_record_btrace_ops): Install it as to_commit_resume method.
        * record-full.c (record_full_commit_resume): New function.
        (record_full_wait_1): Call the beneath target's to_commit_resume
        method.
        (init_record_full_ops): Install record_full_commit_resume as
        to_commit_resume method.
        * remote.c (struct private_thread_info) <last_resume_step,
        last_resume_sig, vcont_resumed>: New fields.
        (remote_add_thread): Set the new thread's vcont_resumed flag.
        (demand_private_info): Delete.
        (get_private_info_thread, get_private_info_ptid): New functions.
        (remote_update_thread_list): Adjust.
        (process_initial_stop_replies): Clear the thread's vcont_resumed
        flag.
        (remote_resume): If connected in non-stop mode, record the resume
        request and return early.
        (struct private_inferior): New.
        (struct vcont_builder): New.
        (vcont_builder_restart, vcont_builder_flush)
        (vcont_builder_push_action): New functions.
        (MAX_ACTION_SIZE): New macro.
        (remote_commit_resume): New function.
        (thread_pending_fork_status, is_pending_fork_parent_thread): New
        functions.
        (check_pending_event_prevents_wildcard_vcont_callback)
        (check_pending_events_prevent_wildcard_vcont): New functions.
        (process_stop_reply): Adjust.  Clear the thread's vcont_resumed
        flag.
        (init_remote_ops): Install remote_commit_resume.
        * target-delegates.c: Regenerate.
        * target.c (defer_target_commit_resume): New global.
        (target_commit_resume, make_cleanup_defer_target_commit_resume):
        New functions.
        * target.h (struct target_ops) <to_commit_resume>: New field.
        (target_resume): Update comments.
        (target_commit_resume): New declaration.

2016-10-26  Pedro Alves  <palves@redhat.com>

        * inferior.c (exit_inferior_1): Free 'priv'.

2016-10-26  Pedro Alves  <palves@redhat.com>

        * remote.c (remote_resume_with_hc): New function, factored out
        from ...
        (remote_resume): ... this.  Always try vCont first.
        (remote_vcont_resume): Rename to ...
        (remote_resume_with_vcont): ... this.  Bail out if execution
        direction is reverse.

2016-10-25  Pedro Alves  <palves@redhat.com>

        * dwarf2expr.h (struct dwarf_expr_context) <~dwarf_expr_context>:
        Make virtual.

2016-10-25  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR build/20712
        * defs.h: Remove obsolete comment
        (atof): Remove.
        * procfs.c (do_destroy_procinfo_cleanup): Add cast.
        (sysset_t_alloc): Likewise.
        (proc_set_traced_sysentry): Likewise.
        (proc_set_traced_sysexit): Likewise.
        [!PIOCLSTATUS && NEW_PROC_API] (do_closedir_cleanup): Likewise.
        (proc_get_LDT_entry): Initiate cleanups before returns.
        (procfs_wait): Use GDB_SIGNAL_0.
        (procfs_corefile_thread_callback): Add cast.
        * sol-thread.c (td_log_ftype, td_ta_new_ftype, td_ta_delete_ftype)
        (td_init_ftype, td_ta_get_ph_ftype, td_ta_get_nthreads_ftype)
        (td_ta_tsd_iter_ftype, td_ta_thr_iter_ftype)
        (td_thr_validate_ftype, td_thr_tsd_ftype, td_thr_get_info_ftype)
        (td_thr_getfpregs_ftype, td_thr_getxregsize_ftype)
        (td_thr_getxregs_ftype, td_thr_sigsetmask_ftype)
        (td_thr_setprio_ftype, td_thr_setsigpending_ftype)
        (td_thr_setfpregs_ftype, td_thr_setxregs_ftype)
        (td_ta_map_id2thr_ftype, td_ta_map_lwp2thr_ftype)
        (td_thr_getgregs_ftype, td_thr_setgregs_ftype): New typedefs.
        (p_td_log, p_td_ta_new, p_td_ta_delete, p_td_init, p_td_ta_get_ph)
        (p_td_ta_get_nthreads, p_td_ta_tsd_iter, p_td_ta_thr_iter)
        (p_td_thr_validate, p_td_thr_tsd, p_td_thr_get_info)
        (p_td_thr_getfpregs, p_td_thr_getxregsize, p_td_thr_getxregs)
        (p_td_thr_sigsetmask, p_td_thr_setprio, p_td_thr_setsigpending)
        (p_td_thr_setfpregs, p_td_thr_setxregs, p_td_ta_map_id2thr)
        (p_td_ta_map_lwp2thr, p_td_thr_getgregs, p_td_thr_setgregs): Use them.
        (ps_pdread): Add cast.
        (ps_ptread): Likewise.
        (resolve): Likewise.
        * top.c (gdb_safe_append_history): Print pid_t as long.

2016-10-25  Pedro Alves  <palves@redhat.com>

        * common/common-defs.h (__STDC_FORMAT_MACROS): Define.

2016-10-25  Pedro Alves  <palves@redhat.com>

        * common/new-op.c: Add comment about -fsanitize=address.

2016-10-25  Pedro Alves  <palves@redhat.com>

       * common/common-defs.h (__STDC_CONSTANT_MACROS)
       (__STDC_LIMIT_MACROS): Define.

2016-10-25  Yao Qi  <yao.qi@linaro.org>

        PR gdb/20716
        * common/new-op.c (__has_feature): New macro.
        Don't override operator new if asan is used.

2016-10-24  Luis Machado  <lgustavo@codesourcery.com>

        * exec.c (exec_file_locate_attach): Prevent NULL pointer dereference
        when duplicating a string.

2016-10-24  Luis Machado  <lgustavo@codesourcery.com>

        * exec.c (exception_print_same): Fix string comparison to use
        statically-allocated ones.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * dwarf2expr.h (class dwarf_expr_context)
        <get_frame_base, get_frame_cfa, get_tls_address, dwarf_call,
        push_dwarf_block_entry_value, get_addr_index, get_object_address>:
        Now pure virtual.
        * dwarf2-frame.c (class dwarf_expr_executor)
        <get_frame_base, get_frame_cfa, get_tls_address, dwarf_call,
        push_dwarf_block_entry_value, get_addr_index, get_object_address>:
        New methods.
        <invalid>: New method.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * minsyms.h (minimal_symbol_reader::record_full): "copy_name" now
        a bool.
        (record, record_with_info): Update.
        * minsyms.c (record): Fix indentation.
        (record_full): Fix indentation.  Update for type change.
        * elfread.c (record_minimal_symbol): "copy_name" now a bool.
        (elf_symtab_read): "copy_names" now a bool.
        (elf_rel_plt_read, elf_read_minimal_symbols): Update.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * main.c: Include <vector>.
        (cmdarg_s): Remove typedef.  Don't define VEC.
        (captured_main_1): Use vector, not VEC.  Remove cleanups.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * dwarf2loc.c (struct dwarf_expr_context_funcs): Don't declare.
        (dwarf_expr_read_addr_from_reg, dwarf_expr_get_reg_value)
        (dwarf_expr_read_mem, dwarf_expr_frame_base): Rename; turn into
        methods.
        (get_frame_pc_for_per_cu_dwarf_call): New function.
        (dwarf_expr_frame_cfa, dwarf_expr_frame_pc)
        (dwarf_expr_tls_address): Rename; turn into methods.
        (per_cu_dwarf_call): Remove arguments.  Use
        get_frame_pc_for_per_cu_dwarf_call.
        (dwarf_evaluate_loc_desc): New class.
        (dwarf_expr_dwarf_call, dwarf_expr_context)
        (dwarf_expr_push_dwarf_reg_entry_value)
        (dwarf_expr_get_addr_index, dwarf_expr_get_obj_addr): Rename; turn
        into methods.
        (dwarf_expr_ctx_funcs): Remove.
        (dwarf2_evaluate_loc_desc_full): Update.
        (dwarf2_locexpr_baton_eval): Update.
        (symbol_needs_eval_context): New class.
        (symbol_needs_read_addr_from_reg, symbol_needs_get_reg_value)
        (symbol_needs_read_mem, symbol_needs_frame_base)
        (symbol_needs_frame_cfa, symbol_needs_tls_address)
        (symbol_needs_dwarf_call, needs_dwarf_reg_entry_value): Rename;
        turn into methods.
        (needs_get_addr_index, needs_get_obj_addr): Remove; turn into
        methods.
        (symbol_needs_ctx_funcs): Remove.
        (dwarf2_loc_desc_get_symbol_read_needs): Update.
        * dwarf2expr.h (struct dwarf_expr_context_funcs): Remove; turn
        contents into methods.
        (struct dwarf_expr_context) <baton, funcs>: Remove.
        <read_addr_from_reg, get_reg_value, read_mem, get_frame_base,
        get_frame_cfa, get_frame_pc, get_tls_address, dwarf_call,
        impl_get_base_type, push_dwarf_block_entry_value, get_addr_index,
        get_object_address>: Declare new methods.
        (ctx_no_get_frame_base, ctx_no_get_frame_cfa)
        (ctx_no_get_frame_pc, ctx_no_get_tls_address, ctx_no_dwarf_call)
        (ctx_no_get_base_type, ctx_no_push_dwarf_reg_entry_value)
        (ctx_no_get_addr_index): Don't declare.
        * dwarf2expr.c (get_base_type): Use impl_get_base_type.
        (execute_stack_op): Update.
        (ctx_no_get_frame_base, ctx_no_get_frame_cfa)
        (ctx_no_get_frame_pc, ctx_no_get_tls_address, ctx_no_dwarf_call)
        (ctx_no_get_base_type, ctx_no_push_dwarf_reg_entry_value)
        (ctx_no_get_addr_index): Remove; now methods on
        dwarf_expr_context.
        * dwarf2-frame.c (read_addr_from_reg): Take a frame_info, not a
        baton.
        (class dwarf_expr_executor): New class.
        (get_reg_value, read_mem): Rename, turn into methods.
        (execute_stack_op): Use dwarf_expr_executor.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * dwarf2loc.c (per_cu_dwarf_call)
        (dwarf_expr_push_dwarf_reg_entry_value)
        (dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval)
        (needs_dwarf_reg_entry_value)
        (dwarf2_loc_desc_get_symbol_read_needs): Update.
        * dwarf2expr.h (dwarf_expr_context) <push_address, eval, fetch,
        fetch_address, fetch_in_stack_memory, address_type, grow_stack,
        push, stack_empty_p, add_piece, get_base_type, execute_stack_op,
        pop>: New method declarations.
        (dwarf_expr_push_address, dwarf_expr_eval, dwarf_expr_fetch)
        (dwarf_expr_fetch_address, dwarf_expr_fetch_in_stack_memory):
        Don't declare.
        * dwarf2expr.c (address_type, grow_stack, push, push_address)
        (pop, fetch, fetch_address, fetch_in_stack_memory)
        (stack_empty_p, add_piece, eval, get_base_type)
        (execute_stack_op): Rename.  Turn into methods.
        * dwarf2-frame.c (execute_stack_op): Update.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Stack-allocate
        dwarf_expr_context.  Remove cleanups.
        (dwarf2_locexpr_baton_eval)
        (dwarf2_loc_desc_get_symbol_read_needs):  Likewise.
        * dwarf2expr.h (dwarf_expr_context, ~dwarf_expr_context): Add
        constructors and destructors.
        (new_dwarf_expr_context, free_dwarf_expr_context)
        (make_cleanup_free_dwarf_expr_context): Don't declare.
        * dwarf2-frame.c (execute_stack_op): Stack-allocate
        dwarf_expr_context.  Remove cleanups.
        (dwarf_expr_context): Rename from new_dwarf_expr_context.  Turn
        into constructor.
        (free_dwarf_expr_context, free_dwarf_expr_context_cleanup):
        Remove.
        (~dwarf_expr_context): Rename from
        make_cleanup_free_dwarf_expr_context.  Turn into destructor.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * dwarf2loc.c: Include <vector>.
        (read_pieced_value, write_pieced_value)
        (dwarf2_compile_expr_to_ax): Use std::vector.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * stack.c (print_stack_frame_to_uiout): Use scoped_restore.
        * ui-out.c (make_cleanup_restore_current_uiout)
        (restore_current_uiout_cleanup): Remove.
        * infrun.c (print_stop_event): Use scoped_restore.
        * ui-out.h (make_cleanup_restore_current_uiout): Don't declare.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * elfread.c (elf_read_minimal_symbols): Use gdb::unique_ptr.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * cli/cli-dump.c (dump_memory_to_file): Use gdb::unique_ptr.
        (restore_binary_file): Likewise.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * maint.h (scoped_command_stats): New class.
        (make_command_stats_cleanup): Don't declare.
        * maint.c (struct cmd_stats): Remove.
        (~scoped_command_stats): Rename from report_command_stats.  Now a
        destructor.
        (scoped_command_stats): Rename from make_command_stats_cleanup.
        Now a constructor.
        * main.c (captured_main_1): New function.  Use
        scoped_command_stats.
        (captured_main): Call captured_main_1.
        * event-top.c (command_handler): Use scoped_command_stats.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * mi/mi-main.c (mi_cmd_data_read_memory): Use gdb::unique_ptr.
        Remove some cleanups.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * tui/tui-interp.c (tui_on_normal_stop, tui_on_signal_received)
        (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
        (tui_on_no_history, tui_on_user_selected_context_changed):
        Update.
        * top.h (switch_thru_all_uis): New class.
        (SWITCH_THRU_ALL_UIS): Rewrite.
        (make_cleanup_restore_current_ui, switch_thru_all_uis_init)
        (switch_thru_all_uis_cond, switch_thru_all_uis_next): Don't
        declare.
        * mi/mi-interp.c (mi_new_thread, mi_thread_exit)
        (mi_record_changed, mi_inferior_added, mi_inferior_appeared)
        (mi_inferior_exit, mi_inferior_removed, mi_on_signal_received)
        (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited)
        (mi_on_no_history, mi_on_normal_stop, mi_traceframe_changed)
        (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
        (mi_breakpoint_created, mi_breakpoint_deleted)
        (mi_breakpoint_modified, mi_output_running_pid, mi_on_resume)
        (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
        (mi_memory_changed, mi_user_selected_context_changed): Update.
        * infrun.c (all_uis_check_sync_execution_done)
        (all_uis_on_sync_execution_starting, normal_stop): Update.
        * event-top.c (restore_ui_cleanup)
        (make_cleanup_restore_current_ui, switch_thru_all_uis_init)
        (switch_thru_all_uis_cond, switch_thru_all_uis_next): Remove.
        * cli/cli-interp.c (cli_on_normal_stop, cli_on_signal_received)
        (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
        (cli_on_no_history, cli_on_user_selected_context_changed):
        Update.
        * breakpoint.c (watchpoint_check): Update.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab): Add
        "reader" argument.  Update.
        (xcoff_initial_scan): Update.
        * symfile.h (mdebug_build_psymtabs): Add "reader" argument.
        * mipsread.c (mipscoff_symfile_read): Update.
        (read_alphacoff_dynamic_symtab): Add "reader" argument.  Update.
        * minsyms.h (minimal_symbol_reader) <record, record_full>:
        Declare.
        <m_msym_bunch, m_msym_bunch_index, m_msym_count>: New members.
        <record_with_info>: New function, renamed from
        prim_record_minimal_symbol_and_info.
        * minsyms.c (msym_bunch, msym_bunch_index, msym_count): Remove
        globals.
        (minimal_symbol_reader): Initialize new members.
        (minimal_symbol_reader::record): Renamed from
        prim_record_minimal_symbol.
        (minimal_symbol_reader::record_full): Renamed from
        prim_record_minimal_symbol_full.
        (prim_record_minimal_symbol_and_info): Move to minsyms.h; rename.
        * mdebugread.c (mdebug_build_psymtabs, parse_partial_symbols)
        (record_minimal_symbol): Add "reader" argument.  Update.
        (elfmdebug_build_psymtabs): Update.
        * machoread.c (macho_symtab_add_minsym, macho_symtab_read): Add
        "reader" argument.  Update.
        (macho_symfile_read): Update.
        * elfread.c (record_minimal_symbol, elf_symtab_read)
        (elf_rel_plt_read): Add "reader" argument.  Update.
        (elf_read_minimal_symbols): Update.
        * dbxread.c (record_minimal_symbol, read_dbx_dynamic_symtab)
        (read_dbx_symtab): Add "reader" argument.  Update.
        (dbx_symfile_read): Update.
        * coffread.c (record_minimal_symbol, coff_symtab_read): Add
        "reader" argument.  Update.
        (coff_symfile_read): Update.
        * coff-pe-read.h (read_pe_exported_syms): Add "reader" argument.
        * coff-pe-read.c (add_pe_exported_sym, add_pe_forwarded_sym)
        (read_pe_exported_syms): Add "reader" argument.  Update.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (xcoff_initial_scan): Update.
        * mipsread.c (mipscoff_symfile_read): Update.
        * minsyms.c (minimal_symbol_reader): Add obj argument.
        Initialize member.
        (install): Remove objfile argument.  Update.
        * mdebugread.c (elfmdebug_build_psymtabs): Update.
        * machoread.c (macho_symfile_read): Update.
        * elfread.c (elf_read_minimal_symbols): Update.
        * dbxread.c (dbx_symfile_read): Update.
        * coffread.c (coff_symfile_read): Update.
        * minsyms.h (minimal_symbol_reader): Add m_objfile member.
        (constructor): Add objfile argument.
        (minimal_symbol_reader::install): Remove objfile argument.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (xcoff_initial_scan): Use
        minimal_symbol_reader.
        * mipsread.c (mipscoff_symfile_read): Use
        minimal_symbol_reader.
        * minsyms.h (minimal_symbol_reader): New class.
        (init_minimal_symbol_collection)
        (make_cleanup_discard_minimal_symbols, install_minimal_symbols):
        Don't declare.
        * minsyms.c (minimal_symbol_reader): Renamed from
        init_minimal_symbol_collection, turned into constructor.
        (~minimal_symbol_reader): Renamed from
        do_discard_minimal_symbols_cleanup, turned into destructor.
        (make_cleanup_discard_minimal_symbols): Remove.
        (minimal_symbol_reader::install): Rename form
        install_minimal_symbols.
        * mdebugread.c (elfmdebug_build_psymtabs): Use
        minimal_symbol_reader.
        * machoread.c (macho_symfile_read): Use
        minimal_symbol_reader.
        * elfread.c (elf_read_minimal_symbols): Use
        minimal_symbol_reader.
        * dbxread.c (dbx_symfile_read): Use minimal_symbol_reader.
        * coffread.c (coff_symfile_read): Use
        minimal_symbol_reader.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * top.c (new_ui_command, wait_sync_command_done)
        (gdb_readline_wrapper): Use scoped_restore.
        * infrun.c (fetch_inferior_event): Use scoped_restore.
        * infcall.c (call_thread_fsm_should_stop): Use scoped_restore.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * utils.c (make_cleanup_restore_ui_file, do_restore_ui_file)
        (struct restore_ui_file_closure): Remove.
        * utils.h (make_cleanup_restore_ui_file): Don't declare.
        * guile/scm-ports.c (ioscm_with_output_to_port_worker): Use
        scoped_restore.
        * top.c (execute_command_to_string): Use scoped_restore.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * common/scoped_restore.h: New file.
        * utils.h: Include scoped_restore.h.
        * top.c (execute_command_to_string): Use scoped_restore.
        * python/python.c (python_interactive_command): Use
        scoped_restore.
        (python_command, execute_gdb_command): Likewise.
        * printcmd.c (do_one_display): Use scoped_restore.
        * mi/mi-main.c (exec_continue): Use scoped_restore.
        * mi/mi-cmd-var.c (mi_cmd_var_assign): Use scoped_restore.
        * linux-fork.c (checkpoint_command): Use scoped_restore.
        * infrun.c (restore_execution_direction): Remove.
        (fetch_inferior_event): Use scoped_restore.
        * compile/compile.c (compile_file_command): Use
        scoped_restore.
        (compile_code_command, compile_print_command): Likewise.
        * cli/cli-script.c (execute_user_command): Use
        scoped_restore.
        (while_command, if_command, script_from_file): Likewise.
        * arm-tdep.c (arm_insert_single_step_breakpoint): Use
        scoped_restore.

2016-10-21  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (read_xcoff_symtab): Make "filestring" const.

2016-10-21  Sangamesh Mallayya  <sangamesh.swamy@in.ibm.com>
            Ulrich Weigand  <uweigand@de.ibm.com>

        * xcoffread.c (read_xcoff_symtab): Make name of current file as
        pst->filename instead of _start_ in AIX.

2016-10-21  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * solist.h (struct target_so_ops): Delete special_symbol_handling
        hook.
        * solib.c (solib_add, reload_shared_libraries): Adjust.
        * solib-aix.c (solib_aix_special_symbol_handling): Delete
        (_initialize_solib_aix): Adjust
        * solib-darwin.c (darwin_special_symbol_handling): Delete
        (_initialize_darwin_solib): Adjust
        * solib-dsbt.c (dsbt_special_symbol_handling): Delete
        (_initialize_dsbt_solib): Adjust
        * solib-frv.c (frv_special_symbol_handling): Delete
        (_initialize_frv_solib): Adjust
        * solib-svr4.c (svr4_special_symbol_handling): Delete
        (_initialize_svr4_solib): Adjust
        * solib-target.c (solib_target_special_symbol_handling): Delete
        (_initialize_solib_target): Adjust

2016-10-20  Yao Qi  <yao.qi@linaro.org>

        * configure.tgt: Don't configure if target is *-*-vxworks*.

2016-10-19  Pedro Alves  <palves@redhat.com>

        * config.in: Regenerate.

2016-10-18  Pedro Alves  <palves@redhat.com>

        * common/common-defs.h (__STDC_CONSTANT_MACROS)
        (__STDC_LIMIT_MACROS): Delete.

2016-10-18  Pedro Alves  <palves@redhat.com>

        * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
        2692e23a48e21f6daa029e8af9f1a143b7532f47.
        * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4:
        Regenerate.
        * gnulib/import/Makefile: Update.
        * gnulib/import/alloca: Update.
        * gnulib/import/basename-lgpl: Update.
        * gnulib/import/canonicalize-lgpl: Update.
        * gnulib/import/config: Update.
        * gnulib/import/dirent: Update.
        * gnulib/import/dirfd: Update.
        * gnulib/import/dirname-lgpl: Update.
        * gnulib/import/dirname.h: Update.
        * gnulib/import/dosname.h: Update.
        * gnulib/import/errno: Update.
        * gnulib/import/extra/snippet/arg-nonnull.h: Update.
        * gnulib/import/extra/snippet/c++defs.h: Update.
        * gnulib/import/extra/snippet/warn-on-use.h: Update.
        * gnulib/import/extra/update-copyright: Update.
        * gnulib/import/flexmember.h: Update.
        * gnulib/import/float+.h: Update.
        * gnulib/import/float: Update.
        * gnulib/import/float: Update.
        * gnulib/import/fnmatch: Update.
        * gnulib/import/fnmatch: Update.
        * gnulib/import/fnmatch_loop: Update.
        * gnulib/import/fpucw.h: Update.
        * gnulib/import/frexp: Update.
        * gnulib/import/frexpl: Update.
        * gnulib/import/gettimeofday: Update.
        * gnulib/import/hard-locale: Update.
        * gnulib/import/hard-locale.h: Update.
        * gnulib/import/inttypes: Update.
        * gnulib/import/isnan: Update.
        * gnulib/import/isnand-nolibm.h: Update.
        * gnulib/import/isnand: Update.
        * gnulib/import/isnanl-nolibm.h: Update.
        * gnulib/import/isnanl: Update.
        * gnulib/import/itold: Update.
        * gnulib/import/limits: Update.
        * gnulib/import/localcharset: Update.
        * gnulib/import/localcharset.h: Update.
        * gnulib/import/lstat: Update.
        * gnulib/import/m4/00gnulib: Update.
        * gnulib/import/m4/absolute-header: Update.
        * gnulib/import/m4/alloca: Update.
        * gnulib/import/m4/canonicalize: Update.
        * gnulib/import/m4/codeset: Update.
        * gnulib/import/m4/configmake: Update.
        * gnulib/import/m4/dirent_h: Update.
        * gnulib/import/m4/dirfd: Update.
        * gnulib/import/m4/dirname: Update.
        * gnulib/import/m4/double-slash-root: Update.
        * gnulib/import/m4/eealloc: Update.
        * gnulib/import/m4/errno_h: Update.
        * gnulib/import/m4/exponentd: Update.
        * gnulib/import/m4/exponentl: Update.
        * gnulib/import/m4/extensions: Update.
        * gnulib/import/m4/extern-inline: Update.
        * gnulib/import/m4/fcntl-o: Update.
        * gnulib/import/m4/flexmember: Update.
        * gnulib/import/m4/float_h: Update.
        * gnulib/import/m4/fnmatch: Update.
        * gnulib/import/m4/fpieee: Update.
        * gnulib/import/m4/frexp: Update.
        * gnulib/import/m4/frexpl: Update.
        * gnulib/import/m4/gettimeofday: Update.
        * gnulib/import/m4/glibc21: Update.
        * gnulib/import/m4/gnulib-cache: Update.
        * gnulib/import/m4/gnulib-common: Update.
        * gnulib/import/m4/gnulib-comp: Update.
        * gnulib/import/m4/gnulib-tool: Update.
        * gnulib/import/m4/hard-locale: Update.
        * gnulib/import/m4/include_next: Update.
        * gnulib/import/m4/inttypes-pri: Update.
        * gnulib/import/m4/inttypes: Update.
        * gnulib/import/m4/isnand: Update.
        * gnulib/import/m4/isnanl: Update.
        * gnulib/import/m4/largefile: Update.
        * gnulib/import/m4/limits-h: Update.
        * gnulib/import/m4/localcharset: Update.
        * gnulib/import/m4/locale-fr: Update.
        * gnulib/import/m4/locale-ja: Update.
        * gnulib/import/m4/locale-zh: Update.
        * gnulib/import/m4/longlong: Update.
        * gnulib/import/m4/lstat: Update.
        * gnulib/import/m4/malloc: Update.
        * gnulib/import/m4/malloca: Update.
        * gnulib/import/m4/math_h: Update.
        * gnulib/import/m4/mbrtowc: Update.
        * gnulib/import/m4/mbsinit: Update.
        * gnulib/import/m4/mbsrtowcs: Update.
        * gnulib/import/m4/mbstate_t: Update.
        * gnulib/import/m4/memchr: Update.
        * gnulib/import/m4/memmem: Update.
        * gnulib/import/m4/mmap-anon: Update.
        * gnulib/import/m4/multiarch: Update.
        * gnulib/import/m4/nocrash: Update.
        * gnulib/import/m4/off_t: Update.
        * gnulib/import/m4/pathmax: Update.
        * gnulib/import/m4/rawmemchr: Update.
        * gnulib/import/m4/readlink: Update.
        * gnulib/import/m4/rename: Update.
        * gnulib/import/m4/rmdir: Update.
        * gnulib/import/m4/signal_h: Update.
        * gnulib/import/m4/ssize_t: Update.
        * gnulib/import/m4/stat: Update.
        * gnulib/import/m4/stdbool: Update.
        * gnulib/import/m4/stddef_h: Update.
        * gnulib/import/m4/stdint: Update.
        * gnulib/import/m4/stdio_h: Update.
        * gnulib/import/m4/stdlib_h: Update.
        * gnulib/import/m4/strchrnul: Update.
        * gnulib/import/m4/string_h: Update.
        * gnulib/import/m4/strstr: Update.
        * gnulib/import/m4/strtok_r: Update.
        * gnulib/import/m4/sys_socket_h: Update.
        * gnulib/import/m4/sys_stat_h: Update.
        * gnulib/import/m4/sys_time_h: Update.
        * gnulib/import/m4/sys_types_h: Update.
        * gnulib/import/m4/time_h: Update.
        * gnulib/import/m4/unistd_h: Update.
        * gnulib/import/m4/warn-on-use: Update.
        * gnulib/import/m4/wchar_h: Update.
        * gnulib/import/m4/wchar_t: Update.
        * gnulib/import/m4/wctype_h: Update.
        * gnulib/import/m4/wint_t: Update.
        * gnulib/import/malloc: Update.
        * gnulib/import/malloca: Update.
        * gnulib/import/malloca.h: Update.
        * gnulib/import/math: Update.
        * gnulib/import/math: Update.
        * gnulib/import/mbrtowc: Update.
        * gnulib/import/mbsinit: Update.
        * gnulib/import/mbsrtowcs-impl.h: Update.
        * gnulib/import/mbsrtowcs-state: Update.
        * gnulib/import/mbsrtowcs: Update.
        * gnulib/import/memchr: Update.
        * gnulib/import/memmem: Update.
        * gnulib/import/pathmax.h: Update.
        * gnulib/import/rawmemchr: Update.
        * gnulib/import/readlink: Update.
        * gnulib/import/ref-add.sin: Update.
        * gnulib/import/ref-del.sin: Update.
        * gnulib/import/rename: Update.
        * gnulib/import/rmdir: Update.
        * gnulib/import/same-inode.h: Update.
        * gnulib/import/signal: Update.
        * gnulib/import/stat: Update.
        * gnulib/import/stdbool: Update.
        * gnulib/import/stddef: Update.
        * gnulib/import/stdint: Update.
        * gnulib/import/stdio: Update.
        * gnulib/import/stdlib: Update.
        * gnulib/import/str-two-way.h: Update.
        * gnulib/import/strchrnul: Update.
        * gnulib/import/streq.h: Update.
        * gnulib/import/string: Update.
        * gnulib/import/stripslash: Update.
        * gnulib/import/strnlen1: Update.
        * gnulib/import/strnlen1.h: Update.
        * gnulib/import/strstr: Update.
        * gnulib/import/strtok_r: Update.
        * gnulib/import/sys_stat: Update.
        * gnulib/import/sys_time: Update.
        * gnulib/import/sys_types: Update.
        * gnulib/import/time: Update.
        * gnulib/import/unistd: Update.
        * gnulib/import/unistd: Update.
        * gnulib/import/verify.h: Update.
        * gnulib/import/wchar: Update.
        * gnulib/import/wctype: Update.
        * gnulib/import/flexmember.h: New file.
        * gnulib/import/hard-locale.c: New file.
        * gnulib/import/hard-locale.h: New file.
        * gnulib/import/limits.in.h: New file.
        * gnulib/import/m4/flexmember.m4: New file.
        * gnulib/import/m4/hard-locale.m4: New file.
        * gnulib/import/m4/limits-h.m4: New file.

2016-10-18  Pedro Alves  <palves@redhat.com>

        * common/common-defs.h: Include "gdb_unique_ptr.h".
        * common/gdb_unique_ptr.h: New.

2016-10-18  Maciej W. Rozycki  <macro@imgtec.com>

        * i386-tdep.c (i386_mpx_info_bounds): Make sure the architecture
        is `bfd_arch_i386' before proceeding.
        (i386_mpx_set_bounds): Likewise.

2016-10-18  Maciej W. Rozycki  <macro@imgtec.com>

        * tilegx-tdep.c (tilegx_analyze_prologue): Use the `long long'
        type for `operands'.

2016-10-17  Simon Marchi  <simon.marchi@ericsson.com>

        * mi/mi-main.c (mi_cmd_trace_save): Check if argument is present
        before using it.

2016-10-17  Pedro Alves  <palves@redhat.com>

        * charset.h (class wchar_iterator) [PHONY_ICONV] <m_desc>: Use
        'int' as type.

2016-10-14  Sangamesh Mallayya  <sangamesh.swamy@in.ibm.com>
            Ulrich Weigand  <uweigand@de.ibm.com>

        * solib-aix.c (solib_aix_bfd_open): Call solib_find so that sysroot
        path is set properly if program has a dependency on .a archive and
        sysroot is set via set sysroot command.

2016-10-14  Markus Metzger  <markus.t.metzger@intel.com>

        * nat/linux-btrace.c: Remove leftover comment.

2016-10-14  Eli Zaretskii  <eliz@gnu.org>

        * common/common-defs.h [HAVE_STRINGS_H]: Include strings.h if
        available, to get prototypes of 'strcasecmp' and 'strncasecmp'.

2016-10-13  Pedro Alves  <palves@redhat.com>

        * contrib/ari/gdb_ari.sh (boolean): Suggest bool instead.
        (false, true): Remove checks.

2016-10-12  Tom Tromey  <tom@tromey.com>

        * machoread.c (macho_symfile_read_all_oso): Use std::string.

2016-10-12  Tom Tromey  <tom@tromey.com>

        * tracepoint.c (trace_dump_command): Remove unnecessary
        null_cleanup.

2016-10-12  Tom Tromey  <tom@tromey.com>

        * valprint.c (generic_emit_char, count_next_character)
        (generic_printstr): Update.
        * charset.c (struct wchar_iterator): Move to charset.h.
        (wchar_iterator::wchar_iterator): Rename from
        make_wchar_iterator, turn into a constructor.
        (wchar_iterator::~wchar_iterator): Rename from
        do_cleanup_iterator, turn into a destructor.
        (make_cleanup_wchar_iterator): Remove.
        (wchar_iterator::iterate): Rename from wchar_iterate.  Remove
        "iter" argument.  Update.
        * charset.h: Include <vector>.
        (class wchar_iterator): New class, from old struct
        wchar_iterator.
        (make_wchar_iterator, make_cleanup_wchar_iterator): Don't
        declare.

2016-10-12  Tom Tromey  <tom@tromey.com>

        * selftest.c: Include <vector>, not "vec.h".
        (self_test_function_ptr): Remove.
        (tests): Now a std::vector.
        (register_self_test, run_self_tests): Update.

2016-10-13  Pedro Alves  <palves@redhat.com>
            Tom Tromey  <tom@tromey.com>

        * tid-parse.h (tid_range_parser): New class.
        (enum tid_range_state): Move into tid_range_parser's scope.
        Remove TID_RANGE_ prefix from all values.
        (tid_range_parser_get_tid, tid_range_parser_get_tid_range)
        (tid_range_parser_star_range, tid_range_parser_finished)
        (tid_range_parser_skip, tid_range_parser_qualified): Don't
        declare.
        (tid_is_in_list): Update comment.
        * tid-parse.c (tid_range_parser::tid_range_parser): New.
        (init, finished, get_string, skip, tid_is_qualified)
        (get_tid_or_range, get_tid_range, get_tid, star_range): Rename;
        turn into methods.
        (tid_is_in_list): Adjust.
        * cli/cli-utils.h (number_or_range_parser): New class.
        (init_number_or_range, get_number_or_range)
        (number_range_setup_range): Don't declare.
        * cli/cli-utils.c
        (number_or_range_parser::number_or_range_parser): New.
        (init_number_or_range, get_number_or_range)
        (number_range_setup_range): Rename; turn into methods.
        (number_is_in_list): Adjust.
        * breakpoint.c (map_breakpoint_numbers): Adjust.  Use bool.
        (trace_pass_command, get_tracepoint_by_number): Adjust.
        * breakpoint.h (get_tracepoint_by_number): Adjust.
        * inferior.c (detach_inferior_command, kill_inferior_command)
        (remove_inferior_command): Adjust.
        * linespec.c (decode_line_2): Adjust.
        * memattr.c (mem_enable_command, mem_disable_command)
        (mem_delete_command): Adjust.
        * printcmd.c (map_display_numbers): Adjust.
        * reverse.c (delete_bookmark_command, bookmarks_info): Adjust.
        * thread.c (thread_apply_command): Adjust.

2016-10-12  Anton Kolesov  <anton.kolesov@synopsys.com>

        * arc-newlib-tdep.c: New file.
        * configure.tgt: Add newlib support for ARC.

2016-10-12  Anton Kolesov  <anton.kolesov@synopsys.com>

        * arc-tdep.h (struct gdbarch_tdep) <jb_pc>: New field.
        * arc-tdep.c (arc_get_longjmp_target): New function.
        (arc_gdbarch_init): Set get_longjmp_target if jb_pc is non-negative.
        (arc_dump_tdep): Print jb_pc.

2016-10-12  Anton Kolesov  <anton.kolesov@synopsys.com>

        * arc-tdep.h (struct gdbarch_tdep): New.
        * arc-tdep.c (arc_gdbarch_init): Allocate gdbarch_tdep.

2016-10-12  Yao Qi  <yao.qi@linaro.org>

        PR tdep/20682
        * aarch64-tdep.c: Replace 32 with AARCH64_D_REGISTER_COUNT.
        (aarch64_analyze_prologue): Extend array 'regs' for D registers.
        Assert that operand 0 and 1 can be X or D registers.  Update
        register number for D registers.  Update registers in frame
        cache.
        * aarch64-tdep.h (AARCH64_D_REGISTER_COUNT): New macro.

2016-10-10  Yao Qi  <yao.qi@linaro.org>

        * arch/arm.h (enum arm_breakpoint_kinds): New.
        * arm-tdep.c (arm_remote_breakpoint_from_pc): Use
        ARM_BP_KIND_THUMB2.

2016-10-10  Yao Qi  <yao.qi@linaro.org>

        * m32c-tdep.c (m32c_gdbarch_init): Rename local 'arch' by
        'gdbarch'.

2016-10-10  Yao Qi  <yao.qi@linaro.org>

        * v850-tdep.c (v850_breakpoint_from_pc): Use the right
        breakpoint instruction.
        (v850_dbtrap_breakpoint_from_pc): Remove.
        (v850_gdbarch_init): Update.

2016-10-08  Simon Marchi  <simon.marchi@polymtl.ca>

        * ui-out.c (push_level): Remove "id" parameter.
        (ui_out_begin): Update call.

2016-10-07  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.12 released.

2016-10-07  Markus Metzger  <markus.t.metzger@intel.com>

        * python/python.c (gdbpy_decode_line): Call
        string_to_event_location_basic instead of new_linespec_location.

2016-10-06  Sergio Durigan Junior  <sergiodj@redhat.com>

        * target.c (target_supports_multi_process): New function, moved
        from...
        * target.h (target_supports_multi_process): ... here.  Remove
        macro.
        * target/target.h (target_supports_multi_process): New prototype.

2016-10-06  Pedro Alves  <palves@redhat.com>

        * cp-valprint.c (vtbl_ptr_name): Write "extern const" instead of
        EXPORTED_CONST.
        * stub-termcap.c: Remove __cplusplus checks.
        * common/common-defs.h [!__cplusplus] (EXTERN_C, EXTERN_C_PUSH,
        EXTERN_C_POP): Delete.
        * common/common-exceptions.h (GDB_XCPT_SJMP): Update comments.
        (GDB_XCPT) [!__cplusplus]: Delete.
        (throw_exception, throw_exception_sjlj): Update comments.
        * guile/guile-internal.h (as_a_scm_t_subr) [!__cplusplus]: Delete.
        * guile/guile.c (extension_language_guile): Write "extern const"
        instead of EXPORTED_CONST.
        * features/feature_to_c.sh: Don't emit !__cplusplus code.  Write
        "extern const" instead of EXPORTED_CONST.

2016-10-06  Doug Evans  <dje@google.com>

        * python/py-value.c (valpy_long): Handle unsigned values.

2016-10-06  Simon Marchi  <simon.marchi@ericsson.com>

        * frame.h: Forward-declare struct ui_out.

2016-10-06  Tom Tromey  <tom@tromey.com>

        * MAINTAINERS: Remove Java test maintainer.
        * varobj.h (java_varobj_ops): Don't declare.
        * valprint.h (struct value_print_options)
        <pascal_static_field_print>: Update comment.
        * utils.c (producer_is_gcc): Remove java reference.
        * symtab.h (struct general_symbol_info): Remove java references.
        (SYMBOL_SEARCH_NAME): Likewise.
        * objfiles.c (allocate_objfile): Update comment.
        * linespec.c (find_linespec_symbols): Remove java references.
        * gnu-v3-abi.c (gnuv3_rtti_type, gnuv3_baseclass_offset): Remove
        java references.
        * gdbtypes.h (struct cplus_struct_type) <is_java>: Remove.
        (TYPE_CPLUS_REALLY_JAVA): Remove.
        * c-varobj.c (enum vsections): Update comment.
        * symtab.c (symbol_set_language, symbol_set_names)
        (symbol_natural_name, symbol_demangled_name)
        (demangle_for_lookup, symbol_matches_domain)
        (default_make_symbol_completion_list_break_on_1): Remove java
        references.
        (JAVA_PREFIX, JAVA_PREFIX_LEN): Remove.
        * psymtab.c (match_partial_symbol, psymtab_search_name)
        (lookup_partial_symbol): Remove java references.
        * dwarf2read.c (find_slot_in_mapped_hash): Remove java references.
        (add_partial_symbol, dwarf2_compute_name, dwarf2_physname)
        (dwarf2_add_member_fn, is_vtable_name, read_structure_type)
        (process_structure_scope, read_subroutine_type)
        (read_subrange_type, load_partial_dies)
        (new_symbol_full, determine_prefix, typename_concat)
        (dwarf2_name): Remove java references.
        (set_cu_language): Treat Java as C++.
        * c-typeprint.c (c_type_print_args): Remove java reference.
        * defs.h (enum language) <language_java>: Remove.
        * Makefile.in (SFILES, HFILES_NO_SRCDIR, COMMON_OBS, YYFILES)
        (YYOBJ, local-maintainer-clean): Don't mention java files.
        * jv-exp.y, jv-lang.c, jv-lang.h, jv-typeprint.c, jv-valprint.c,
        jv-varobj.c: Remove.

2016-10-06  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (mips_pseudo_register_type): Make FCRs always
        32-bit.

2016-10-06  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (mips_pseudo_register_type): Rearrange comments
        throughout.

2016-10-06  Markus Metzger  <markus.t.metzger@intel.com>

        * stack.c (frame_info): Call val_print_not_saved instead of
        val_print_unavailable if frame_id check fails.

2016-10-06  Pedro Alves  <palves@redhat.com>

        * jit.c (free_objfile_data): Delete the JIT breakpoint and clear
        the cached code address.

2016-10-06  Doug Evans  <dje@google.com>

        * features/aarch64-core.xml (cpsr_flags): Elide "type" and specify
        "end" in all fields.
        * features/aarch64.c: Regenerate.
        * features/i386/32bit-mpx.xml (_bndcfgu): Specify type of "preserved"
        and "enabled" fields. Correct size of "enabled" field.
        * features/i386/64bit-mpx.xml (_bndcfgu): Specify type of "preserved"
        and "enabled" fields.
        * features/i386/i386-avx-mpx-linux.c: Regenerate.
        * features/i386/i386-avx-mpx.c: Regenerate.
        * features/i386/i386-avx512-linux.c: Regenerate.
        * features/i386/i386-avx512.c: Regenerate.
        * features/i386/i386-mpx-linux.c: Regenerate.
        * features/i386/i386-mpx.c: Regenerate.
        * features/arc-arcompact.c: Regenerate.
        * features/arc-v2.c: Regenerate.
        * xml-tdesc.c (tdesc_start_field): Require "end" spec.  Single bit
        fields default to "bool" type.

        Revert 2016-03-15  Doug Evans  <dje@google.com>
        * features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
        * features/i386/32bit-sse.xml (i386_eflags): Ditto.
        * features/i386/64bit-core.xml (i386_eflags): Ditto.
        * features/i386/64bit-sse.xml (i386_eflags): Ditto.
        * features/i386/x32-core.xml (i386_eflags): Ditto.

2016-10-05  Tom Tromey  <tom@tromey.com>

        PR breakpoints/20653:
        * location.c (string_to_explicit_location): Use NULL, not '\0'.

2016-10-05  Tom Tromey  <tom@tromey.com>

        PR symtab/20652:
        * psymtab.c (psymbol_compare): Correctly compare "ginfo.value"
        fields.

2016-10-05  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * dwarf2expr.c (dwarf_expr_require_composition): Allow
        DW_OP_GNU_uninit.
        (execute_stack_op): Use dwarf_expr_require_composition instead of
        copying its logic.

2016-10-05  Anton Kolesov  <anton.kolesov@synopsys.com>

        * arc-tdep.c (arc_frame_prev_register): Remove annoying log message.

2016-10-05  Yao Qi  <yao.qi@linaro.org>

        * features/Makefile (WHICH): Add
        rs6000/powerpc-isa205-32l, rs6000/powerpc-isa205-64l,
        rs6000/powerpc-isa205-altivec32l, rs6000/powerpc-isa205-altivec64l,
        rs6000/powerpc-isa205-vsx32l and rs6000/powerpc-isa205-vsx64l.
        * regformats/rs6000/powerpc-isa205-32l.dat: Regenerated.
        * regformats/rs6000/powerpc-isa205-64l.dat: Likewise.
        * regformats/rs6000/powerpc-isa205-altivec32l.dat: Likewise.
        * regformats/rs6000/powerpc-isa205-altivec64l.dat: Likewise.
        * regformats/rs6000/powerpc-isa205-vsx32l.dat: Likewise.
        * regformats/rs6000/powerpc-isa205-vsx64l.dat: Likewise.

2016-10-05  Yao Qi  <yao.qi@linaro.org>

        * features/Makefile (XMLTOC): Add s390-tevx-linux64.xml,
        s390-vx-linux64.xml, s390x-tevx-linux64.xml and
        s390x-vx-linux64.xml.

2016-10-05  Yao Qi  <yao.qi@linaro.org>

        * features/Makefile: Remove i386/*-expedite. Add i386-expedite,
        amd64-expedite, and x32-expedite.

2016-10-05  Terry Guo  <terry.guo@arm.com>
            Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c: Adjust includes.
        * features/Makefile (WHICH): Add "arm/" directory to arm
        target descriptions.
        (XMLTOC): Likewise.
        (arm/arm-with-iwmmxt.dat): Adjust the path for
        dependencies.
        * features/arm-core.xml: Moved to ...
        * features/arm/arm-core.xml: ... it.
        * features/arm-fpa.xml: Moved to ...
        * features/arm/arm-fpa.xml: ... it.
        * features/arm-m-profile.xml: Moved to ...
        * features/arm/arm-m-profile.xm: ... it.
        * features/arm-vfpv2.xml: Moved to ...
        * features/arm/arm-vfpv2.xm: ... it.
        * features/arm-vfpv3.xml: Moved to ...
        * features/arm/arm-vfpv3.xml: ... it.
        * features/arm-with-iwmmxt.c: Moved to ...
        * features/arm/arm-with-iwmmxt.c: ... it.
        * features/arm-with-iwmmxt.xml: Moved to ...
        * features/arm/arm-with-iwmmxt.xml: ... it.
        * features/arm-with-m-fpa-layout.c: Moved to ...
        * features/arm/arm-with-m-fpa-layout.c: ... it.
        * features/arm-with-m-fpa-layout.xml: Moved to ...
        * features/arm/arm-with-m-fpa-layout.xml: ... it.
        * features/arm-with-m-vfp-d16.c: Moved to ...
        * features/arm/arm-with-m-vfp-d16.c: ... it.
        * features/arm-with-m-vfp-d16.xml: Moved to ...
        * features/arm/arm-with-m-vfp-d16.xml: ... it.
        * features/arm-with-m.c: Moved to ...
        * features/arm/arm-with-m.c: ... it.
        * features/arm-with-m.xml: Moved to ...
        * features/arm/arm-with-m.xm: ... it.
        * features/arm-with-neon.c: Moved to ...
        * features/arm/arm-with-neon.c: ... it.
        * features/arm-with-neon.xml: Moved to ...
        * features/arm/arm-with-neon.xml: ... it.
        * features/arm-with-vfpv2.c: Moved to ...
        * features/arm/arm-with-vfpv2.c: ... it.
        * features/arm-with-vfpv2.xml: Moved to ...
        * features/arm/arm-with-vfpv2.xml: ... it.
        * features/arm-with-vfpv3.c: Moved to ...
        * features/arm/arm-with-vfpv3.c: ... it.
        * features/arm-with-vfpv3.xml: Moved to ...
        * features/arm/arm-with-vfpv3.xml: ... it.
        * features/xscale-iwmmxt.xml: Moved to ...
        * features/arm/xscale-iwmmxt.xml: ... it.

2016-10-03  Antoine Tremblay  <antoine.tremblay@ericsson.com>
2016-10-03  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/20487
        * NEWS: Mention new frame field of =thread-selected event.
        * cli/cli-decode.c (add_cmd): Initialize c->suppress_notification.
        (add_com_suppress_notification): New function definition.
        (cmd_func): Set and restore the suppress_notification flag.
        * cli/cli-deicode.h (struct cmd_list_element)
        <suppress_notification>: New field.
        * cli/cli-interp.c (cli_suppress_notification): New global variable.
        (cli_on_user_selected_context_changed): New function.
        (_initialize_cli_interp): Attach to user_selected_context_changed
        observer.
        * command.h (struct cli_suppress_notification): New structure.
        (cli_suppress_notification): New global variable declaration.
        (add_com_suppress_notification): New function declaration.
        * defs.h (enum user_selected_what_flag): New enum.
        (user_selected_what): New enum flag type.
        * frame.h (print_stack_frame_to_uiout): New function declaration.
        * gdbthread.h (print_selected_thread_frame): New function declaration.
        * inferior.c (print_selected_inferior): New function definition.
        (inferior_command): Remove printing of inferior/thread/frame switch
        notifications, notify user_selected_context_changed observer.
        * inferior.h (print_selected_inferior): New function declaration.
        * mi/mi-cmds.c (struct mi_cmd): Add user_selected_context
        suppression to stack-select-frame and thread-select commands.
        * mi/mi-interp.c (struct mi_suppress_notification)
        <user_selected_context>: Initialize.
        (mi_user_selected_context_changed): New function definition.
        (_initialize_mi_interp): Attach to user_selected_context_changed.
        * mi/mi-main.c (mi_cmd_thread_select): Print thread selection reply.
        (mi_execute_command): Handle notification suppression.  Notify
        user_selected_context_changed observer on thread change instead of printing
        event directly.  Don't send it if command already sends the notification.
        (command_notifies_uscc_observer): New function.
        (mi_cmd_execute): Don't handle notification suppression.
        * mi/mi-main.h (struct mi_suppress_notification)
        <user_selected_context>: New field.
        * stack.c (print_stack_frame_to_uiout): New function definition.
        (select_frame_command): Notify user_selected_context_changed
        observer.
        (frame_command): Call print_selected_thread_frame if there's no frame
        change or notify user_selected_context_changed observer if there is.
        (up_command): Notify user_selected_context_changed observer.
        (down_command): Likewise.
        (_initialize_stack): Suppress user_selected_context notification for
        command select-frame.
        * thread.c (thread_command): Notify
        user_selected_context_changed if the thread has changed, print
        thread info directly if it hasn't.
        (do_captured_thread_select): Do not print thread switch event.
        (print_selected_thread_frame): New function definition.
        * tui/tui-interp.c (tui_on_user_selected_context_changed):
        New function definition.
        (_initialize_tui_interp): Attach to user_selected_context_changed
        observer.

2016-09-29  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR gdb/20609 - attach of JIT-debug-enabled inf 7.11.1 regression
        * exec.c (exec_file_locate_attach): Add parameter defer_bp_reset.
        Use it.
        * gdbcore.h (exec_file_locate_attach): Add parameter defer_bp_reset.
        * infcmd.c (setup_inferior): Update caller.
        * remote.c (remote_add_inferior): Likewise.

2016-09-28  Pedro Alves  <palves@redhat.com>

        * infcall.c (run_inferior_call): Remove input from the event
        loop while running the infcall.

2016-09-27  Fredrik Hederstierna  <fredrik.hederstierna@verisure.com>

        * arm-tdep.c (arm_m_addr_is_magic): New function.
        (arm_addr_bits_remove): Call arm_m_addr_is_magic.
        (arm_m_exception_unwind_sniffer): Likewise.

2016-09-23  Jon Turney  <jon.turney@dronecode.org.uk>

        * windows-nat.c (windows_delete_thread): Adjusting call to
        target_mourn_inferior to include ptid_t argument.

2016-09-23  Tom Tromey  <tom@tromey.com>

        * utils.h (make_cleanup_dyn_string_delete): Remove declaration.
        * utils.c: Don't include dyn-string.h.
        (do_dyn_string_delete, make_cleanup_dyn_string_delete): Remove.
        * cli/cli-cmds.c: Include <string>.  Don't include dyn-string.h.
        (argv_to_string): Rename.  Change return type to std::string.
        (alias_command): Use std::string.

2016-09-23  Tom Tromey  <tom@tromey.com>

        * objfiles.c: Include <vector>.
        (objfile_relocate): Use std::vector.

2016-09-23  Tom Tromey  <tom@tromey.com>

        * rust-lang.c: Include <string> and <vector>.
        (rust_evaluate_funcall): Use std::vector, std::string.
        (rust_evaluate_subexp): Use std::string.
        (rust_lookup_symbol_nonlocal): Use std::string.

2016-09-23  Tom Tromey  <tom@tromey.com>

        * cp-namespace.c: Include <string>.
        (cp_search_static_and_baseclasses)
        (cp_lookup_symbol_imports_or_template, find_symbol_in_baseclass):
        Use std::string.

2016-09-23  Tom Tromey  <tom@tromey.com>

        * break-catch-sig.c: Include <string>.
        (signal_catchpoint_print_one): Use std::string.

2016-09-23  Tom Tromey  <tom@tromey.com>

        * utils.c (struct restore_ui_out_closure): Remove.
        * objfiles.h (terminate_minimal_symbol_table): Don't declare.

2016-09-23  Yao Qi  <yao.qi@linaro.org>

        * nat/linux-osdata.c (linux_xfer_osdata_threads): Replace
        sprintf with xsnprintf.
        (linux_xfer_osdata_fds): Likewise.

2016-09-23  Pedro Alves  <palves@redhat.com>

        * Makefile.in (SFILES): Add common/new-op.c.
        (COMMON_OBS): Add common/new-op.o.
        (new-op.o): New rule.
        * common/common-exceptions.h: Include <new>.
        (struct gdb_quit_bad_alloc): New type.
        * common/new-op.c: New file.

2016-09-22  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * rs6000-tdep.c (ppc_process_record_op31): Fix
        regcache_raw_read_unsigned call using the correct parameter type.

2016-09-22  Anton Kolesov  <anton.kolesov@synopsys.com>

        * arc-tdep.c: Fix ARI warning for printf(%p).

2016-09-21  Anton Kolesov  <anton.kolesov@synopsys.com>

        * MAINTAINERS (Write After Approval): Add Anton Kolesov.

2016-09-21  Anton Kolesov  <anton.kolesov@synopsys.com>

        * Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o.
        (HFILES_NO_SRCDIR): Add arc-tdep.h.
        (ALLDEPFILES): Add arc-tdep.c.
        * NEWS: Mention new ARC port.
        * configure.tgt: Add ARC.
        * arc-tdep.c: New file.
        * arc-tdep.h: New file.
        * features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml.
        * features/arc-v2.xml: New file.
        * features/arc-v2.c: New file (generated).
        * features/arc-arcompact.xml: New file.
        * features/arc-arcompact.c: New file (generated).

2016-09-21  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * rs6000-tdep.c (ppc_process_record_op63): Fix return of instruction
        handlers.

2016-09-21  Tom Tromey  <tom@tromey.com>

        PR gdb/20604:
        * top.h (quit_force): Update.
        * top.c (quit_force): Changed type of first argument.  Don't
        evaluate expression.  Pass NULL to kill_or_detach.
        * cli/cli-cmds.c (quit_command): Evaluate "args".

2016-09-21  Simon Marchi  <simon.marchi@ericsson.com>

        * .gitignore: Ignore more files.
        * data-directory/.gitignore: Likewise.

2016-09-21  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * rs6000-tdep.c (PPC_DQ): New macro.
        (ppc_process_record_op4): Add Power ISA 3.0 instructions.
        (ppc_process_record_op19): Likewise.
        (ppc_process_record_op31): Likewise.
        (ppc_process_record_op59): Likewise.
        (ppc_process_record_op60): Likewise.
        (ppc_process_record_op63): Likewise.
        (ppc_process_record): Likewise.
        (ppc_process_record_op61): New function.

2016-09-21  Yao Qi  <yao.qi@linaro.org>

        * aarch32-linux-nat.c (aarch32_gp_regcache_collect): Keep
        bits 20 to 23.

2016-09-20  Tom Tromey  <tom@tromey.com>

        * python/py-value.c (convert_value_from_python): Make PyInt_Check
        conditional on Python 2.
        * python/py-arch.c (archpy_disassemble): Make PyInt_Check
        conditional on Python 2.

2016-09-20  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * rs6000-tdep.c (ppc_process_record_op31): Fix record of Store String
        Word instructions.

2016-09-20  Sergio Durigan Junior  <sergiodj@redhat.com>

        * fork-inferior.c (startup_inferior): Pass 'event_ptid' instead of
        'resume_ptid' to 'target_mourn_inferior'.  Fix regression
        introduced by my last commit.

2016-09-19  Pedro Alves  <palves@redhat.com>

        * common/gdb_locale.h [!ENABLE_NLS] (gettext, dgettext, dcgettext,
        textdomain, bindtextdomain): Delete macros.
        * main.c (captured_main) [!ENABLE_NLS]: Skip bintextdomain and
        textdomain calls.

2016-09-19  Sergio Durigan Junior  <sergiodj@redhat.com>

        * darwin-nat.c (darwin_kill_inferior): Adjusting call to
        target_mourn_inferior to include ptid_t argument.
        * fork-child.c (startup_inferior): Likewise.
        * gnu-nat.c (gnu_kill_inferior): Likewise.
        * inf-ptrace.c (inf_ptrace_kill): Likewise.
        * infrun.c (handle_inferior_event_1): Likewise.
        * linux-nat.c (linux_nat_attach): Likewise.
        (linux_nat_kill): Likewise.
        * nto-procfs.c (interrupt_query): Likewise.
        (procfs_interrupt): Likewise.
        (procfs_kill_inferior): Likewise.
        * procfs.c (procfs_kill_inferior): Likewise.
        * record.c (record_mourn_inferior): Likewise.
        * remote-sim.c (gdbsim_kill): Likewise.
        * remote.c (remote_detach_1): Likewise.
        (remote_kill): Likewise.
        * target.c (target_mourn_inferior): Change declaration to accept
        new ptid_t argument; use gdb_assert on it.
        * target.h (target_mourn_inferior): Move function prototype from
        here...
        * target/target.h (target_mourn_inferior): ... to here.  Adjust it
        to accept new ptid_t argument.
        * windows-nat.c (get_windows_debug_event): Adjusting call to
        target_mourn_inferior to include ptid_t argument.

2016-09-18  Pedro Alves  <palves@redhat.com>

        * s390-linux-nat.c: Include <algorithm>.

2016-09-18  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (hardware_watchpoint_inserted_in_range): Explicitly
        specify the std:min/std::max specialization.
        * exec.c (section_table_read_available_memory): Likewise.
        * remote.c (remote_read_qxfer): Likewise.
        * target.c (simple_verify_memory): Likewise.

2016-09-16  Simon Marchi  <simark@simark.ca>

        * infrun.c (restore_current_uiout_cleanup): Move to ui-out.c.
        (print_stop_event): Use make_cleanup_restore_current_uiout.
        * python/python.c (execute_gdb_command): Likewise.
        * ui-out.c (restore_current_uiout_cleanup): Move from infrun.c.
        (make_cleanup_restore_current_uiout): New function definition.
        * ui-out.h (make_cleanup_restore_current_uiout): New function
        declaration.
        * utils.c (do_restore_ui_out): Remove.
        (make_cleanup_restore_ui_out): Remove.
        * utils.h (make_cleanup_restore_ui_out): Remove.

2016-09-16  Pedro Alves  <palves@redhat.com>

        * defs.h (min, max): Delete.
        * aarch64-tdep.c: Include <algorithm> and use std::min and
        std::max throughout.
        * aarch64-tdep.c: Likewise.
        * alpha-tdep.c: Likewise.
        * amd64-tdep.c: Likewise.
        * amd64-windows-tdep.c: Likewise.
        * arm-tdep.c: Likewise.
        * avr-tdep.c: Likewise.
        * breakpoint.c: Likewise.
        * btrace.c: Likewise.
        * ctf.c: Likewise.
        * disasm.c: Likewise.
        * doublest.c: Likewise.
        * dwarf2loc.c: Likewise.
        * dwarf2read.c: Likewise.
        * environ.c: Likewise.
        * exec.c: Likewise.
        * f-exp.y: Likewise.
        * findcmd.c: Likewise.
        * ft32-tdep.c: Likewise.
        * gcore.c: Likewise.
        * hppa-tdep.c: Likewise.
        * i386-darwin-tdep.c: Likewise.
        * i386-tdep.c: Likewise.
        * linux-thread-db.c: Likewise.
        * lm32-tdep.c: Likewise.
        * m32r-tdep.c: Likewise.
        * m88k-tdep.c: Likewise.
        * memrange.c: Likewise.
        * minidebug.c: Likewise.
        * mips-tdep.c: Likewise.
        * moxie-tdep.c: Likewise.
        * nds32-tdep.c: Likewise.
        * nios2-tdep.c: Likewise.
        * nto-procfs.c: Likewise.
        * parse.c: Likewise.
        * ppc-sysv-tdep.c: Likewise.
        * probe.c: Likewise.
        * record-btrace.c: Likewise.
        * remote.c: Likewise.
        * rs6000-tdep.c: Likewise.
        * rx-tdep.c: Likewise.
        * s390-linux-nat.c: Likewise.
        * s390-linux-tdep.c: Likewise.
        * ser-tcp.c: Likewise.
        * sh-tdep.c: Likewise.
        * sh64-tdep.c: Likewise.
        * source.c: Likewise.
        * sparc-tdep.c: Likewise.
        * symfile.c: Likewise.
        * target-memory.c: Likewise.
        * target.c: Likewise.
        * tic6x-tdep.c: Likewise.
        * tilegx-tdep.c: Likewise.
        * tracefile-tfile.c: Likewise.
        * tracepoint.c: Likewise.
        * valprint.c: Likewise.
        * value.c: Likewise.
        * xtensa-tdep.c: Likewise.
        * cli/cli-cmds.c: Likewise.
        * compile/compile-object-load.c: Likewise.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-nat.c (PER_BIT, PER_EVENT_BRANCH, PER_EVENT_IFETCH)
        (PER_EVENT_STORE, PER_EVENT_NULLIFICATION)
        (PER_CONTROL_BRANCH_ADDRESS, PER_CONTROL_SUSPENSION)
        (PER_CONTROL_ALTERATION): New macros.
        (struct s390_debug_reg_state) <break_areas>: New member.
        (s390_forget_process): Free break_areas as well.
        (s390_linux_new_fork): Copy break_areas as well.
        (s390_prepare_to_resume): Install hardware breakpoints.
        (s390_can_use_hw_breakpoint): Indicate support for hardware
        breakpoints.
        (s390_insert_hw_breakpoint, s390_remove_hw_breakpoint): New
        linux_nat target methods.
        (_initialize_s390_nat): Register them.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * nat/linux-nat.h (lwp_is_stepping): New declaration.
        * linux-nat.c (lwp_is_stepping): New function.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-nat.c (gdbcmd.h): New include.
        (s390_show_debug_regs): New function.
        (s390_stopped_by_watchpoint): Call it, if show_debug_regs is set.
        (s390_prepare_to_resume): Likewise.
        (_initialize_s390_nat): Register the command "maint set
        show-debug-regs".

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-nat.c (watch_areas): Remove variable.  Replace by a
        member of...
        (struct s390_debug_reg_state): ...this.  New struct.
        (struct s390_process_info): New struct.
        (s390_process_list): New variable.
        (s390_find_process_pid, s390_add_process, s390_process_info_get)
        (s390_get_debug_reg_state): New functions.
        (s390_stopped_by_watchpoint): Now access the watch_areas VEC via
        s390_get_debug_reg_state.
        (s390_prepare_to_resume): Likewise.
        (s390_insert_watchpoint): Likewise.
        (s390_remove_watchpoint): Likewise.
        (s390_forget_process, s390_linux_new_fork): New linux_nat target
        methods.
        (_initialize_s390_nat): Register them.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-nat.c (s390_watch_area): New typedef.  Define a VEC.
        (watch_base): Remove variable.
        (watch_areas): New variable.
        (s390_stopped_by_watchpoint): Transform operations on the
        watch_base list to equivalent operations on the watch_areas VEC.
        (s390_prepare_to_resume): Likewise.
        (s390_insert_watchpoint): Likewise.
        (s390_remove_watchpoint): Likewise.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-nat.c (s390_prepare_to_resume): Use advertised lwp
        functions instead of accessing lwp_info structure members.
        (s390_mark_per_info_changed): New function.
        (s390_new_thread): Use it.
        (s390_refresh_per_info_cb): New function.
        (s390_refresh_per_info): Remove parameter.  Refresh all lwps of
        the current process.
        (s390_insert_watchpoint): Adjust call to s390_refresh_per_info.
        (s390_remove_watchpoint): Likewise.

2016-09-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * elfread.c (auxv.h): New include.
        (elf_gnu_ifunc_resolve_addr): Pass HWCAP to ifunc resolver.

2016-09-08  Tom Tromey  <tom@tromey.com>

        * remote.c (remote_notif_stop_ack, remote_wait_as)
        (show_remote_cmd): Remove unneeded casts.

2016-09-06  Pedro Alves  <palves@redhat.com>

        * top.c (wait_sync_command_done): Don't assume current_ui doesn't
        change across events.  Restore the current UI before returning.
        (gdb_readline_wrapper): Restore the current UI before returning.

2016-09-06  Pedro Alves  <palves@redhat.com>

        * event-top.c (restore_ui_cleanup): Now static.
        (make_cleanup_restore_current_ui): New function.
        (switch_thru_all_uis_init): Use it.
        * infcall.c (call_thread_fsm_should_stop): Use it.
        * infrun.c (fetch_inferior_event): Use it.
        * top.c (new_ui_command): Use it.
        * top.h (restore_ui_cleanup): Delete declaration.
        (make_cleanup_restore_current_ui): New declaration.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * i386-tdep.c (i386_floatformat_for_type): New function.
        (i386_gdbarch_init): Install it.
        * ppc-linux-tdep.c (ppc_floatformat_for_type): New function.
        (ppc_linux_init_abi): Install it.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (floatformat_for_type): New gdbarch callback.
        * gdbarch.h, gdbarch.c: Re-generate.
        * arch-utils.h (default_floatformat_for_type): New prototype.
        * arch-utils.c (default_floatformat_for_type): New function.

        * doublest.c (floatformat_from_length): Remove.
        (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL.
        * gdbtypes.c (verify_floatformat): Require non-NULL format.

        * dwarf2read.c (dwarf2_init_float_type): New function.
        (read_base_type): Use it.
        * stabsread.c (dbx_init_float_type): New function.
        (read_sun_floating_type): Use it.
        (read_range_type): Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * ada-lang.c (ada_language_arch_info): Use gdbarch-provided
        platform ABI floating-point formats for built-in types.
        * d-lang.c (build_d_types): Likewise.
        * f-lang.c (build_fortran_types): Likewise.
        * m2-lang.c (build_m2_types): Likewise.
        * mdebugread.c (basic_type): Likewise.

        * go-lang.c (build_go_types): Use IEEE floating-point formats
        for language built-in types as mandanted by the language.
        * jv-lang.c (build_java_types): Likewise.
        * rust-lang.c (rust_language_arch_info): Likewise.
        * stabsread.c (rs6000_builtin_type): Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.c (init_type): Remove "char" special case.
        (arch_integer_type): Likewise.
        (gdbtypes_post_init): Set TYPE_NOSIGN for "char" type.
        (objfile_type): Likewise.
        * mdebugread.c (basic_type): Likewise.
        * stabsread.c (rs6000_builtin_type): Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (enum type_flag_value): Remove.
        Remove references to TYPE_FLAG_... in comments throughout.
        * gdbtypes.c (recursive_dump_type): Do not print TYPE_FLAG_... 
        flags, print the corresponding TYPE_... access macro names.
        Remove references to TYPE_FLAG_... in comments throughout.
        * infcall.c: Remove references to TYPE_FLAG_... in comments.
        * valprint.c: Likewise.
        * gdb-gdb.py (class TypeFlag): No longer consider TYPE_FLAG_...
        values, only TYPE_INSTANCE_FLAG_... values.
        (class TypeFlagsPrinter): Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (init_type): Remove FLAGS argument.  Move OBJFILE
        argument to first position.
        (init_integer_type): New prototype.
        (init_character_type): Likewise.
        (init_boolean_type): Likewise.
        (init_float_type): Likewise.
        (init_decfloat_type): Likewise.
        (init_complex_type): Likewise.
        (init_pointer_type): Likewise.
        * gdbtypes.c (verify_floatflormat): New function.
        (init_type): Remove FLAGS argument and processing.  Move OBJFILE
        argument to first position.
        (init_integer_type): New function.
        (init_character_type): Likewise.
        (init_boolean_type): Likewise.
        (init_float_type): Likewise.
        (init_decfloat_type): Likewise.
        (init_complex_type): Likewise.
        (init_pointer_type): Likewise.
        (arch_float_type): Use verify_floatflormat.
        (objfile_type): Use init_..._type helpers instead of calling
        init_type directly.
        * dwarf2read.c (fixup_go_packaging): Update to changed init_type
        prototype.
        (read_namespace_type): Likewise.
        (read_module_type): Likewise.
        (read_typedef): Likewise.
        (read_unspecified_type): Likewise.
        (build_error_marker_type): Likewise.
        (read_base_type): Use init_..._type helpers.
        * mdebugread.c (basic_type): Use init_..._type helpers.
        (parse_type): Update to changed init_type prototype.
        (cross_ref): Likewise.
        * stabsread.c (rs6000_builtin_type): Use init_..._type helpers.
        (read_sun_builtin_type): Likewise.
        (read_sun_floating_type): Likewise.
        (read_range_type): Likewise.  Also update to changed init_type
        prototype.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (arch_decfloat_type): New prototype.
        (arch_pointer_type): Likewise.
        * gdbtypes.c (arch_decfloat_type): New function.
        (arch_pointer_type): Likewise.
        (gdbtypes_post_init): Use arch_decfloat_type.
        * avr-tdep.c (avr_gdbarch_init): Use arch_pointer_type.
        * ft32-tdep.c (ft32_gdbarch_init): Likewise.
        * m32c-tdep.c (make_types): Likewise.
        * rl78-tdep.c (rl78_gdbarch_init): Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.c (set_type_code): New function.
        (init_type, arch_type): Use it.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * ada-lang.c (ada_language_arch_info): Use gdbarch_long_double_bit
        instead of gdbarch_double_bit for "long_long_float".

2016-09-05  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention that a C++ compiler is now required.
        * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
        (COMPILE.pre, CC_LD): Use CXX directly.
        (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
        * acinclude.m4: Don't include build-with-cxx.m4.
        * build-with-cxx.m4: Delete file.
        * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
        * warning.m4: Assume $enable_build_with_cxx is yes.
        * configure: Regenerate.

2016-09-05  Pedro Alves  <palves@redhat.com>

        PR backtrace/19927
        * frame.c (get_frame_id): Compute the frame id if not computed
        yet.
        (unwind_to_current_frame): Delete.
        (get_current_frame): Use get_prev_frame_always_1 to get the
        current frame and assert that that always succeeds.
        (get_prev_frame_if_no_cycle): Skip cycle detection if returning
        the current frame.

2016-09-02  Tom Tromey  <tom@tromey.com>

        PR gdb/11616:
        * dwarf2read.c (decode_locdesc): Handle DW_OP_form_tls_address.
        * dwarf2loc.c (dwarf2_compile_expr_to_ax): Handle
        DW_OP_form_tls_address.
        (locexpr_describe_location_piece): Likewise.
        * dwarf2expr.h (struct dwarf_expr_context_funcs): Update comment.
        * dwarf2expr.c (execute_stack_op): Handle DW_OP_form_tls_address.
        (ctx_no_get_tls_address): Mention DW_OP_form_tls_address.
        * compile/compile-loc2c.c (struct insn_info): Update comment.
        (compute_stack_depth_worker): Handle DW_OP_form_tls_address.

2016-09-01  Sergio Durigan Junior  <sergiodj@redhat.com>

        * target.c (target_wait): Mention that the function's prototype
        can be found at target/target.h.
        * target.h (target_wait): Move prototype from here...
        * target/target.h (target_wait): ... to here.

2016-09-01  Sergio Durigan Junior  <sergiodj@redhat.com>

        * fork-child.c (startup_inferior): Replace calls to target_resume
        by target_continue{,_no_signal}, depending on the case.
        * linux-nat.c (cleanup_target_stop): Call
        target_continue_no_signal instead of target_resume.
        * procfs.c (procfs_wait): Likewise.
        * target.c (target_continue): New function.
        * target/target.h (target_continue): New prototype.

2016-08-31  Yao Qi  <yao.qi@linaro.org>

        * record-full.c (record_full_insert_breakpoint): Fix typo.

2016-08-30  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * thread.c (tp_array_compar): Insert missing parentheses.

2016-08-25  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * xtensa-tdep.h (XTENSA_GDBARCH_TDEP_INSTANTIATE): Replace
        designated initializer list by plain initializer list, for C++
        compliance.

2016-08-25  Adhemerval Zanella  <adhemerval.zanella@linaro.org>

        * aarch64-linux-nat.c (ps_get_thread_area): Remove const from
        struct ps_prochandle.
        * amd64-linux-nat.c (ps_get_thread_area): Likewise.
        * arm-linux-nat.c (ps_get_thread_area): Likewise.
        * gdb_proc_service.h (ps_get_thread_area): Likewise.
        * i386-linux-nat.c (ps_get_thread_area): Likewise.
        * m68klinux-nat.c (ps_get_thread_area): Likewise.
        * mips-linux-nat.c (ps_get_thread_area): Likewise.
        * nat/aarch64-linux.c (aarch64_ps_get_thread_area): Likewise.
        * nat/aarch64-linux.h (aarch64_ps_get_thread_area): Likewise.
        * xtensa-linux-nat.c (ps_get_thread_area): Likewise.

2016-08-24  Simon Marchi  <simon.marchi@ericsson.com>

        * infcmd.c (set_inferior_io_terminal): Set inferior terminal to
        NULL if terminal_name is an empty string.
        (_initialize_infcmd): Make the argument of "set inferior-tty"
        optional, mention it in the help doc.

2016-08-24  Carl Love  <cel@us.ibm.com>

        * rs6000-tdep.c (rs6000_gdbarch_init): Remove call
        set_gdbarch_deprecated_fp_regnum() architecture
        initialization function.

2016-08-23  Simon Marchi  <simon.marchi@ericsson.com>

        * stack.c (parse_frame_specification): Fix typo in comment.

2016-08-23  Pedro Alves  <palves@redhat.com>

        PR gdb/20494
        * inflow.c (our_terminal_info, initial_gdb_ttystate): Update
        comments.
        (enum gdb_has_a_terminal_flag_enum, gdb_has_a_terminal_flag):
        Delete.
        (set_initial_gdb_ttystate): Record our_terminal_info here too,
        instead of ...
        (gdb_has_a_terminal): ... here.  Reimplement in terms of
        initial_gdb_ttystate.  Make static.
        * terminal.h (gdb_has_a_terminal): Delete declaration.
        (set_initial_gdb_ttystate): Add comment.
        * top.c (show_interactive_mode): Use input_interactive_p instead
        of gdb_has_a_terminal.

2016-08-22  Pedro Alves  <palves@redhat.com>

        PR gdb/20505
        * linux-tdep.c (linux_vsyscall_range_raw): For core inferiors,
        find the vDSO's start address with AT_SYSINFO_EHDR too, and
        determine the vDSO's size by finding the PT_LOAD segment that
        matches AT_SYSINFO_EHDR.

2016-08-19  Yao Qi  <yao.qi@linaro.org>

        * aarch64-tdep.c (aarch64_analyze_prologue): Handle register
        based STP instruction.

2016-08-19  Yao Qi  <yao.qi@linaro.org>

        * completer.c (linespec_location_completer): Make file_to_match
        null-terminated.

2016-08-19  Pedro Alves  <palves@redhat.com>

        * amd64-tdep.c (amd64_relocate_instruction) <callq>: Handle return
        addresses over 0x7fffffff.

2016-08-18  Carl Love  <cel@us.ibm.com>

        * MAINTANERS Write After Approval): Add "Carl Love".

2016-08-18  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * rs6000-tdep.c (ppc_process_record_op31): Handle HTM instructions.

2016-08-17  Simon Marchi  <simon.marchi@ericsson.com>

        * inferior.c (remove_inferior_command): Fix error message.

2016-08-17  Simon Marchi  <simon.marchi@ericsson.com>

        * inferior.c (exit_inferior_1): Remove comment.

2016-08-15  Matthew Wahab  <matthew.wahab@arm.com>

        PR gdb/20457
        * gdb_proc_service.h: Add an include of gregset.h
        [!HAVE_PROC_SERVICE_H]: Remove the include of gregset.h.

2016-08-15  Yao Qi  <yao.qi@linaro.org>

        * location.c (explicit_location_lex_one): Compare the return
        value of strncmp with zero.  Don't check (*inp)[9].  Increment
        *inp by 8.

2016-08-11  Pedro Alves  <palves@redhat.com>

        PR gdb/20413
        * nat/linux-ptrace.c: Include <sys/procfs.h> instead of
        "gregset.h".

2016-08-10  Pedro Alves  <palves@redhat.com>

        PR gdb/19187
        * record-full.c (record_full_remove_breakpoint): Don't remove the
        breakpoint from the record_full_breakpoints VEC if we're detaching
        the breakpoint from a fork child.

2016-08-10  Pedro Alves  <palves@redhat.com>

        PR gdb/19187
        * break-catch-sig.c (signal_catchpoint_remove_location): Adjust
        interface.
        * break-catch-syscall.c (remove_catch_syscall):
        * breakpoint.c (enum remove_bp_reason): Moved to breakpoint.h.
        (remove_breakpoint_1): Pass 'reason' down.
        (remove_catch_fork, remove_catch_vfork, remove_catch_solib)
        (remove_catch_exec, remove_watchpoint, remove_masked_watchpoint)
        (base_breakpoint_remove_location, bkpt_remove_location)
        (bkpt_probe_remove_location, bkpt_probe_remove_location): Adjust
        interface.
        * breakpoint.h (enum remove_bp_reason): Moved here from
        breakpoint.c.
        (struct breakpoint_ops) <remove_location>: Add 'reason' parameter.
        * corelow.c (core_remove_breakpoint): New function.
        (init_core_ops): Install it as to_remove_breakpoint method.
        * exec.c (exec_remove_breakpoint): New function.
        (init_exec_ops): Install it as to_remove_breakpoint method.
        * mem-break.c (memory_remove_breakpoint): Adjust interface.
        * record-btrace.c (record_btrace_remove_breakpoint): Adjust
        interface.
        * record-full.c (record_full_remove_breakpoint)
        (record_full_core_remove_breakpoint): Adjust interface.
        * remote.c (remote_remove_breakpoint): Adjust interface.
        * target-debug.h (target_debug_print_enum_remove_bp_reason): New
        macro.
        * target-delegates.c: Regenerate.
        * target.c (target_remove_breakpoint): Add 'reason' parameter.
        * target.h (struct target_ops) <to_remove_breakpoint>: Add
        'reason' parameter.
        (target_remove_breakpoint, memory_remove_breakpoint): Add 'reason'
        parameter.

2016-08-10  Pedro Alves  <palves@redhat.com>

        PR gdb/19187
        * breakpoint.c (insertion_state_t): Delete.
        (enum remove_bp_reason): New.
        (detach_breakpoints, remove_breakpoint_1, remove_breakpoint):
        Adjust to use enum remove_bp_reason instead of insertion_state_t.

2016-08-10  Pedro Alves  <palves@redhat.com>

        PR gdb/19187
        * breakpoint.c (remove_breakpoint): Remove 'is' parameter and
        always pass mark_uninserted to remove_breakpoint_1.
        (insert_breakpoint_locations, remove_breakpoints)
        (remove_breakpoints_pid, update_global_location_list): Update
        callers.

2016-08-10  Руслан Ижбулатов  <lrn1986@gmail.com>
            Pedro Alves  <palves@redhat.com>

        * windows-nat.c (MS_VC_EXCEPTION): New define.
        (handle_exception_result): New enum.
        (windows_delete_thread): Free the thread's name.
        (handle_exception): Handle MS_VC_EXCEPTION.
        (get_windows_debug_event): Handle HANDLE_EXCEPTION_IGNORED.
        (windows_thread_name): New function.
        (windows_target): Install it as to_thread_name method.
        * NEWS: Mention the thread naming support on MS-Windows.

2016-08-10  Pedro Alves  <palves@redhat.com>

        * common/signals-state-save-restore.c
        (save_original_signals_state, restore_original_signals_state):
        Wrap perror_with_name arguments with '()'.

2016-08-09  Pedro Alves  <palves@redhat.com>

        PR gdb/20418
        * event-top.c (ui_register_input_event_handler)
        (ui_unregister_input_event_handler): New functions.
        (async_enable_stdin): Register input in the event loop.
        (async_disable_stdin): Unregister input from the event loop.
        (gdb_setup_readline): Register input in the event loop.
        * infrun.c (check_curr_ui_sync_execution_done): Register input in
        the event loop.
        * target.c (target_terminal_inferior): Don't unregister input from
        the event loop.
        (target_terminal_ours): Don't register input in the event loop.
        * target.h (target_terminal_inferior)
        (target_terminal_ours_for_output, target_terminal_ours): Update
        comments.
        * top.h (ui_register_input_event_handler)
        (ui_unregister_input_event_handler): New declarations.
        * utils.c (ui_unregister_input_event_handler_cleanup)
        (prepare_to_handle_input): New functions.
        (defaulted_query, prompt_for_continue): Use
        prepare_to_handle_input.

2016-08-09  Pedro Alves  <palves@redhat.com>

        PR mi/20431
        * mi/mi-main.c (mi_execute_command): Enable input and set prompt
        state to PROMPT_NEEDED.

2016-08-09  Pedro Alves  <palves@redhat.com>

        PR gdb/18653
        * Makefile.in (SFILES): Add
        common/signals-state-save-restore.c.
        (HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
        (COMMON_OBS): Add signals-state-save-restore.o.
        (signals-state-save-restore.o): New rule.
        * configure: Regenerate.
        * fork-child.c: Include "signals-state-save-restore.h".
        (fork_inferior): Call restore_original_signals_state.
        * main.c: Include "signals-state-save-restore.h".
        (captured_main): Call save_original_signals_state.
        * common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
        * common/signals-state-save-restore.c: New file.
        * common/signals-state-save-restore.h: New file.

2016-08-09  Pedro Alves  <palves@redhat.com>

        * value.c (unpack_value_bitfield): Skip unpacking if the parent
        has no contents buffer to begin with.

2016-08-08  Pedro Alves  <palves@redhat.com>

        * features/i386/amd64-avx-mpx-linux.c: Regenerate.
        * features/i386/amd64-avx-mpx.c: Regenerate.
        * features/i386/i386-avx-mpx-linux.c: Regenerate.
        * features/i386/i386-avx-mpx.c: Regenerate.

2016-08-05  Simon Marchi  <simon.marchi@ericsson.com>

        * event-top.h (cli_command_loop): Remove.

2016-08-05  Pedro Alves  <palves@redhat.com>

        PR remote/20398
        * remote-fileio.c (remote_fileio_quit_handler): Check the quit
        flag before calling quit.

2016-08-05  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention that GDB and GDBserver build with a C++ compiler
        by default.

2016-08-05  Pedro Alves  <palves@redhat.com>

        * build-with-cxx.m4: Change help string to be in terms of
        --disable-build-with-cxx.
        * configure: Regenerate.

2016-08-04  Yao Qi  <yao.qi@linaro.org>

        * aarch64-linux-nat.c (tdesc_arm_with_vfpv3): Remove the
        declaration.
        (aarch64_linux_read_description): Remove code on getting
        auxv and select target description on it.  Select target
        description by the result of NT_ARM_VFP ptrace request.

2016-08-03  Tom Tromey  <tom@tromey.com>

        PR python/18565:
        * python/py-frame.c (frapy_function): Use find_frame_funname.

2016-08-03  Tom Tromey  <tom@tromey.com>

        * stack.c (find_frame_funname): Avoid any possible leak in case
        cp_remove_params can throw.

2016-08-03  Tom Tromey  <tom@tromey.com>

        * NEWS: Mention new Python breakpoint events.

2016-08-02  Tom Tromey  <tom@tromey.com>

        * MAINTAINERS (Core): Add self as Rust maintainer.

2016-08-01  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

2016-08-01  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.12 branch created (41bfcd638a4e0e48b96ce4de2845372dea481322):
        * version.in: Bump version to 7.12.50.DATE-git.

2016-07-27  Alan Modra  <amodra@gmail.com>

        * amd64-darwin-tdep.c: Don't include libbfd.h.
        * i386-darwin-tdep.c: Likewise.
        * rs6000-nat.c: Likewise.
        * rs6000-tdep.c: Likewise.

2016-07-26  Tom Tromey  <tom@tromey.com>

        * symtab.c (register_symbol_computed_impl): Update.
        PR python/20190:
        * value.h (symbol_read_needs): Declare.
        (symbol_read_needs_frame): Add comment.
        * symtab.h (struct symbol_computed_ops) <read_variable>: Update
        comment.
        <get_symbol_read_needs>: Rename.  Change return type.
        * findvar.c (symbol_read_needs): New function.
        (symbol_read_needs_frame): Rewrite.
        (default_read_var_value): Use symbol_read_needs.
        * dwarf2loc.c (struct symbol_needs_baton): Rename.
        <needs>: Renamed from needs_frame.  Changed type.
        (needs_frame_read_addr_from_reg, symbol_needs_get_reg_value)
        (symbol_needs_read_mem, symbol_needs_frame_base)
        (symbol_needs_frame_cfa, symbol_needs_tls_address)
        (symbol_needs_dwarf_call): Rename.
        (needs_dwarf_reg_entry_value): Update.
        (symbol_needs_ctx_funcs, dwarf2_loc_desc_get_symbol_read_needs):
        Rename and update.
        (locexpr_get_symbol_read_needs, loclist_symbol_needs): Likewise.
        (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
        * defs.h (enum symbol_needs_kind): New.

2016-07-26  Pedro Alves  <palves@redhat.com>

        * nat/linux-ptrace.c: Include "gregset.h".
        (linux_ptrace_test_ret_to_nx): Use PTRACE_GETREGS instead of
        PTRACE_PEEKUSER.

2016-07-26  Pedro Alves  <palves@redhat.com>

        * amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
        parameter to 'ptrace'.
        * nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
        (nat_uptr_t): New an unsigned long.
        (nat_clock_t): Remove attribute __aligned__.
        (struct nat_timeval): Delete.
        (nat_siginfo_t): Remove attribute __aligned__.
        (ptrace_siginfo_t): Define.
        (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
        (compat_x32_siginfo_from_siginfo)
        (siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
        Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
        Remove casts.
        (amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
        'ptrace'.  Remove static assertions.
        (top level): New static assertions.

2016-07-25  Simon Marchi  <simon.marchi@ericsson.com>

        * top.h (make_delete_ui_cleanup): New declaration.
        * top.c (delete_ui_cleanup): New function.
        (make_delete_ui_cleanup): New function.
        (new_ui_command): Create restore_ui cleanup earlier, create a
        delete_ui cleanup and discard it on success.

2016-07-25  Pedro Alves  <palves@redhat.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * nat/linux-procfs.c (parse_proc_status_state): Handle lowercase
        't'.

2016-07-25  Pedro Alves  <palves@redhat.com>

        * nat/linux-procfs.c (enum proc_state): New enum.
        (parse_proc_status_state): New function.
        (linux_proc_pid_get_state): Replace output string buffer parameter
        with an output proc_state parameter.  Use parse_proc_status_state.
        (linux_proc_pid_is_gone): Adjust to use proc_state values.
        (linux_proc_pid_has_state): Change type of 'state' parameter; now
        an enum proc_state.  Adjust to linux_proc_pid_get_state interface
        change.
        (linux_proc_pid_is_stopped)
        (linux_proc_pid_is_trace_stopped_nowarn)
        (linux_proc_pid_is_zombie_maybe_warn): Adjust to
        linux_proc_pid_get_state interface change.

2016-07-25  Tim Wiederhake  <tim.wiederhake@intel.com>

        * MAINTAINERS (Write After Approval): Add Tim Wiederhake

2016-07-25  Tim Wiederhake  <tim.wiederhake@intel.com>

        * NEWS: Resume btrace on reconnect.
        * record-btrace.c: Added record-btrace.h include.
        (record_btrace_open): Split into this and ...
        (record_btrace_push_target): ... this.
        (record_btrace_disconnect): New function.
        (init_record_btrace_ops): Use record_btrace_disconnect.
        * record-btrace.h: New file.
        * remote.c: Added record-btrace.h include.
        (remote_start_remote): Check recording status.
        (remote_btrace_maybe_reopen): New function.

2016-07-23  Gabriel Krisman Bertazi  <gabriel@krisman.be>

        * xml-syscall.c (get_syscalls_by_group): New.
        (get_syscall_group_names): New.
        (struct syscall_group_desc): New structure to store group data.
        (struct syscalls_info): Include field to store the group list.
        (sysinfo_free_syscall_group_desc): New.
        (free_syscalls_info): Free group list.
        (syscall_group_create_syscall_group_desc): New.
        (syscall_group_add_syscall): New.
        (syscall_create_syscall_desc): Add syscall to its groups.
        (syscall_start_syscall): Load group attribute.
        (syscall_group_get_group_by_name): New.
        (xml_list_syscalls_by_group): New.
        (xml_list_of_groups): New.
        * xml-syscall.h (get_syscalls_by_group): Export function
        to retrieve a list of syscalls filtered by the group name.
        (get_syscall_group_names): Export function to retrieve the list
        of syscall groups.
        * break-catch-syscall.c (catch_syscall_split_args): Verify if
        argument is a syscall group and expand it to a list of syscalls
        when creating catchpoints.
        (catch_syscall_completer): Add word completion for system call
        groups.
        * configure.ac: Include dependency for xsltproc when building
        in maintainer-mode.
        * break-catch-syscall.c (_initialize_breakpoint): Update catch
        syscall command documentation.
        * NEWS: Include section about catching groups of syscalls.
        * configure: Regenerate.
        * data-directory/Makefile.in: Generate syscall xml when building
        in maintainer mode.
        * syscalls/gdb-syscalls.dtd: Include group attribute to the
        syscall element.
        * syscalls/apply-defaults.xsl: New.
        * syscalls/linux-defaults.xml.in: New.
        * syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in.
        * syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in.
        * syscalls/arm-linux.xml: Rename to arm-linux.xml.in.
        * syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in.
        * syscalls/i386-linux.xml: Rename to i386-linux.xml.in.
        * syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in.
        * syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in.
        * syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in.
        * syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in.
        * syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in.
        * syscalls/s390-linux.xml: Rename to s390-linux.xml.in.
        * syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in.
        * syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in.
        * syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in.
        * syscalls/aarch64-linux.xml: Regenerate.
        * syscalls/amd64-linux.xml: Regenerate.
        * syscalls/arm-linux.xml: Regenerate.
        * syscalls/i386-linux.xml: Regenerate.
        * syscalls/mips-n32-linux.xml: Regenerate.
        * syscalls/mips-n64-linux.xml: Regenerate.
        * syscalls/mips-o32-linux.xml: Regenerate.
        * syscalls/ppc-linux.xml: Regenerate.
        * syscalls/ppc64-linux.xml: Regenerate.
        * syscalls/s390-linux.xml: Regenerate.
        * syscalls/s390x-linux.xml: Regenerate.
        * syscalls/sparc-linux.xml: Regenerate.
        * syscalls/sparc64-linux.xml: Regenerate.

2016-07-23  Andrew Pinski  <apinski@cavium.com>

        * nat/aarch64-linux-hw-point.c
        (aarch64_linux_get_debug_reg_capacity): Handle
        ARMv8.1 and ARMv8.2 debug versions.
        * nat/aarch64-linux-hw-point.h
        (AARCH64_DEBUG_ARCH_V8_1): New define.
        (AARCH64_DEBUG_ARCH_V8_2): New define.

2016-06-30  Руслан Ижбулатов  <lrn1986@gmail.com>

        PR gdb/14529
        * windows-nat.c (signal_event_command): New command 'signal-event'
        for W32 JIT debug support.
        * NEWS: Add an entry about the new 'signal-event' command.

2016-07-22  Tom Tromey  <tom@tromey.com>

        PR rust/20162:
        * dwarf2read.c (scan_partial_symbols) <DW_TAG_structure_type>:
        Call scan_partial_symbols for children when reading a Rust CU.
        (dwarf2_physname): Ignore invalid DW_AT_linkage_name generated by
        rustc.
        (process_structure_scope) <DW_TAG_subprogram>: Call
        read_func_scope for Rust.

2016-07-22  Yao Qi  <yao.qi@linaro.org>

        * ctf.c (ctf_traceframe_info): Call bt_ctf_get_uint64 rather than
        bt_ctf_get_int64.

2016-07-21  Tom Tromey  <tom@tromey.com>

        * rust-lang.c (rust_tuple_struct_type_p): Return false for empty
        structs.
        * rust-exp.y (struct_expr_list): Allow empty elements.

2016-07-21  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * warning.m4 (AM_GDB_WARNINGS) <build_warnings>: Add
        -Wunused-but-set-parameter, -Wunused-but-set-variable.

2016-07-21  Pedro Alves  <palves@redhat.com>

        * go32-nat.c (go32_create_inferior): Add cast.
        * ser-go32.c (dos_noop): Delete.
        (dos_flush_output, dos_setparity, dos_drain_output): New
        functions.
        (dos_write): Add cast.
        (dos_ops): Use dos_flush_output, dos_setparity and
        dos_drain_output.
        * top.c (do_chdir_cleanup): Add cast.

2016-07-21  Pedro Alves  <palves@redhat.com>

        * windows-nat.c (handle_exception): Remove "th".

2016-07-21  Pedro Alves  <palves@redhat.com>

        * varobj.c (varobj_value_get_print_value): Move "gdbarch" to block
        scope that uses it.

2016-07-20  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_enable_proc_events): Enable "PTRACE_VFORK"
        events.
        (fbsd_pending_vfork_done): Only define if "PTRACE_VFORK" is not
        defined.
        (fbsd_add_vfork_done): Likewise.
        (fbsd_is_vfork_done_pending): Likewise.
        (fbsd_next_vfork_done): Likewise.
        (fbsd_resume): Only ignore pending vfork done events if
        "PTRACE_VFORK" is not defined.
        (fbsd_wait): Only look for pending vfork done events if
        "PTRACE_VFORK" is not defined.
        [PTRACE_VFORK]: Handle "PL_FLAG_VFORKED" and "PL_FLAG_VFORK_DONE"
        events.
        (fbsd_follow_fork): Only fake a vfork done event if "PTRACE_VFORK"
        is not defined.

2016-07-20  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_wait): Use "fbsd_enable_proc_events" on
        new child processes.

2016-07-20  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_enable_lwp_events): Remove function.
        (fbsd_enable_proc_events): New function.
        (fbsd_enable_follow_fork): Remove function.
        (fbsd_post_startup_inferior): Use "fbsd_enable_proc_events".
        (fbsd_post_attach): Likewise.

2016-07-15  John Baldwin  <jhb@FreeBSD.org>

        * common/signals.c (gdb_signal_from_host): Handle SIGLIBRT.
        (do_gdb_signal_to_host): Likewise.
        * infrun.c (_initialize_infrun): Pass GDB_SIGNAL_LIBRT through to
        programs.
        * proc-events.c (signal_table): Add entry for SIGLIBRT.

2016-07-14  Tom Tromey  <tom@tromey.com>

        * python/py-breakpoint.c (gdbpy_breakpoint_deleted): Add missing
        newline.

2016-07-14  Tom Tromey  <tom@tromey.com>

        * mips-tdep.c (micromips_scan_prologue): Remove "frame_addr".
        (mips_o32_push_dummy_call): Remove "stack_used_p".
        * aarch64-tdep.c (aarch64_record_data_proc_imm): Remove
        "insn_bit28".
        * rust-lang.c (rust_print_type): Remove "len".
        * rust-exp.y (super_name): Remove "current_len".
        * python/py-framefilter.c (py_print_type): Remove "type".
        * mdebugread.c (parse_partial_symbols): Remove
        "past_first_source_file".
        <N_SO>: Remove "valu", "first_so_symnum", "prev_textlow_not_set".
        * m2-valprint.c (m2_print_unbounded_array): Remove
        "content_type".
        (m2_val_print): Remove "i".
        * linespec.c (unexpected_linespec_error): Remove "cleanup".
        * f-valprint.c (f_val_print): Remove "i".
        * elfread.c (elf_symtab_read): Remove "offset".
        * dwarf2-frame.c (dwarf2_fetch_cfa_info): Remove "addr_size".
        * jit.c (jit_dealloc_cache): Remove "i" and "frame_arch".

2016-07-14  Tom Tromey  <tom@tromey.com>

        * arch-utils.c (default_skip_permanent_breakpoint): Remove
        "bp_insn".
        * disasm.c (do_assembly_only): Remove "num_displayed".
        * dwarf2read.c (read_abbrev_offset): Remove "length".
        (dwarf_decode_macro_bytes) <DW_MACINFO_vendor_ext>: Remove
        "constant".
        * m32c-tdep.c (make_regs): Remove "r2hl", "r3hl", and "intbhl".
        * microblaze-tdep.c (microblaze_frame_cache): Remove "func".
        * tracefile.c (trace_save): Remove "status".

2016-07-14  Tom Tromey  <tom@tromey.com>

        * symfile.c (simple_overlay_update_1): Remove initialization
        of "size", and commented-out code.
        (simple_overlay_update): Likewise.

2016-07-14  Tom Tromey  <tom@tromey.com>

        * tui/tui-winsource.c (tui_show_source_line): Use getcurx.
        * tui/tui-io.c (tui_puts): Use getcurx.
        (tui_redisplay_readline): Likewise.

2016-07-14  Tom Tromey  <tom@tromey.com>

        * inflow.c (child_terminal_ours_1): Use ATTRIBUTE_UNUSED.

2016-07-14  Tom Tromey  <tom@tromey.com>

        * corefile.c (reopen_exec_file): Only examine st.st_mtime if stat
        succeeded.

2016-07-13  Tom Tromey  <tom@tromey.com>

        PR python/15620, PR python/18620:
        * python/py-evts.c (gdbpy_initialize_py_events): Call
        add_new_registry for new events.
        * python/py-events.h (events_object) <breakpoint_created,
        breakpoint_deleted, breakpoint_modified>: New fields.
        * python/py-breakpoint.c (gdbpy_breakpoint_created): Emit the
        breakpoint changed event.
        (gdbpy_breakpoint_deleted): Emit the breakpoint deleted event.
        (gdbpy_breakpoint_modified): New function.
        (gdbpy_initialize_breakpoints): Attach to the breakpoint modified
        observer.

2016-07-13  Tom Tromey  <tom@tromey.com>

        PR python/17698:
        * NEWS: Update.
        * python/py-breakpoint.c (bppy_get_pending): New function.
        (breakpoint_object_getset): Add entry for "pending".
        * breakpoint.h (pending_breakpoint_p): Declare.
        * breakpoint.c (pending_breakpoint_p): New function.

2016-07-13  Tom Tromey  <tom@tromey.com>

        * python/py-breakpoint.c (bppy_get_visibility)
        (gdbpy_breakpoint_created): Use user_breakpoint_p.

2016-07-13  Tom Tromey  <tom@tromey.com>

        PR cli/18053:
        * jit.c (jit_reader_load_command): Use tilde_expand.
        (_initialize_jit): Fix help for jit-reader-unload.  Set completer
        for new commands.

2016-07-12  Tom Tromey  <tom@tromey.com>

        PR python/19293:
        * python/lib/gdb/command/unwinders.py (do_enable_unwinder): Call
        gdb.invalidate_cached_frames.
        * python/lib/gdb/unwinder.py (register_unwinder): Call
        gdb.invalidate_cached_frames.
        * python/python.c (gdbpy_invalidate_cached_frames): New function.
        (python_GdbMethods): Add entry for invalidate_cached_frames.

2016-07-07  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * cp-namespace.c (cp_lookup_bare_symbol): Initialize 
        lang_this.symbol.

2016-07-07  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * cp-namespace.c (cp_lookup_bare_symbol): Use language passed as
        parameter to look for the symbol "this".


2016-07-06  John Baldwin  <jhb@FreeBSD.org>

        * h8300-tdep.c (h8300_print_register): Remove extraneous parentheses.

2016-07-06  John Baldwin  <jhb@FreeBSD.org>

        * ada-lang.c (ada_unpack_from_contents): Use unsigned constants with
        left shifts.

2016-07-06  John Baldwin  <jhb@FreeBSD.org>

        * sh64-tdep.c (sh64_analyze_prologue): Set "uses_fp" when setting
        the MEDIA_FP_REGNUM register.

2016-07-06  John Baldwin  <jhb@FreeBSD.org>

        * score-tdep.c (score7_malloc_and_get_memblock): Remove check for
        negative size.

2016-07-06  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_is_vfork_done_pending): Fix return type.

2016-07-06  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_vfp_cprc_sub_candidate): Don't call
        arm_vfp_cprc_sub_candidate for static field.

2016-07-06  Manish Goregaokar  <manish@mozilla.com>

        * rust-lang.c (rust_subscript): Allow subscripting pointers.

2016-07-05  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * configure: Regenerate.
        * configure.ac (HAVE_LIBBABELTRACE): Fix pos variable dereference.

2016-07-01  Don Breazeal  <donb@codesourcery.com>

        * remote.c (remote_get_memory_xfer_limit): New function.
        * target-delegates.c: Regenerate.
        * target.c (memory_xfer_partial): Call
        target_ops.to_get_memory_xfer_limit.
        * target.h (struct target_ops) <to_get_memory_xfer_limit>: New
        member.

2016-07-01  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (struct fbsd_fork_child_info): Rename to ...
        (struct fbsd_fork_info): ... this.
        (struct fbsd_fork_info) <child>: Rename to ...
        (struct fbsd_fork_info) <ptid>: ... this.
        (fbsd_pending_children): Update type.
        (fbsd_remember_child): Update type and field name.
        (fbsd_is_child_pending): Likewise.
        (fbsd_pending_vfork_done): New variable.
        (fbsd_is_vfork_done_pending): New function.
        (fbsd_next_vfork_done): New function.
        (fbsd_resume): Don't resume processes with a pending vfork done
        event.
        (fbsd_wait): Report pending vfork done events.
        (fbsd_follow_fork): Delay and record a pending vfork done event
        for a vfork parent when detaching the child.

2016-07-01  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (super_resume): Move earlier next to "super_wait".
        (resume_one_thread_cb): Move below fork following helper code.
        (resume_all_threads_cb): Likewise.
        (fbsd_resume): Likewise.

2016-07-01  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_follow_fork): Only detach child if
        "detach_fork" is true.

2016-07-01  John Baldwin  <jhb@FreeBSD.org>

        * x86bsd-nat.c: Include 'gdbthread.h'.
        (x86bsd_dr_set): Set debug registers on all threads belonging to
        the current inferior.

2016-07-01  John Baldwin  <jhb@FreeBSD.org>

        * Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with
        'x86bsd-nat.h'.
        * amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of
        'amd64bsd-nat.h'.
        (amd64bsd_xsave_len): Rename and move to x86bsd-nat.c.
        (amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len'
        with 'x86bsd_xsave_len'.
        (amd64bsd_store_inferior_registers): Likewise.
        (amd64bsd_target): Inherit from x86bsd_target.
        (amd64bsd_dr_get): Rename and move to x86bsd-nat.c.
        (amd64bsd_dr_set): Likewise.
        (amd64bsd_dr_set_control): Likewise.
        (amd64bsd_dr_set_addr): Likewise.
        (amd64bsd_dr_get_addr): Likewise.
        (amd64bsd_dr_get_status): Likewise.
        (amd64bsd_dr_get_control): Likewise.
        * amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of
        'amd64bsd-nat.h'.
        (super_mourn_inferior): Move to x86bsd-nat.c.
        (amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c.
        (amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with
        'x86bsd_xsave_len'.
        (_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and
        mourn_inferior' target op.
        * config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o.
        * config/i386/fbsd64.mh: Likewise.
        * config/i386/nbsd64.mh: Likewise.
        * config/i386/nbsdelf.mh: Likewise.
        * config/i386/obsd.mh: Likewise.
        * config/i386/obsd64.mh: Likewise.
        * i386bsd-nat.c: Include 'x86bsd-nat.h'.
        (i386bsd_xsave_len): Rename and move to x86bsd-nat.c.
        (i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len'
        with 'x86bsd_xsave_len'.
        (i386bsd_store_inferior_registers): Likewise.
        (i386bsd_target): Inherit from x86bsd_target.
        (i386bsd_dr_get): Rename and move to x86bsd-nat.c.
        (i386bsd_dr_set): Likewise.
        (i386bsd_dr_set_control): Likewise.
        (i386bsd_dr_set_addr): Likewise.
        (i386bsd_dr_get_addr): Likewise.
        (i386bsd_dr_get_status): Likewise.
        (i386bsd_dr_get_control): Likewise.
        * i386bsd-nat.h (i386bsd_xsave_len): Remove.
        (i386bsd_dr_set_control): Remove.
        (i386bsd_dr_set_addr): Remove.
        (i386bsd_dr_get_addr): Remove.
        (i386bsd_dr_get_status): Remove.
        (i386bsd_dr_get_control): Remove.
        * i386fbsd-nat.c: Include 'x86bsd-nat.h'.
        (i386fbsd_read_description): Replace 'i386bsd_xsave_len' with
        'x86bsd_xsave_len'.
        (_initialize_i386fbsd_nat): Remove x86 watchpoint setup and
        mourn_inferior' target op.
        * x86bsd-nat.c: New file.
        * x86bsd-nat.h: New file.

2016-07-01  Pedro Alves  <palves@redhat.com>
            Tom Tromey  <tom@tromey.com>

        * jit.c (jit_reader_load_command): Call reinit_frame_cache and
        jit_inferior_created_hook.
        (jit_reader_unload_command): Call reinit_frame_cache and
        jit_inferior_exit_hook.
        * jit.c (struct jit_unwind_private) <registers>: Delete field.
        <regcache>: New field.
        (jit_unwind_reg_set_impl): Set the register's value in the
        regcache.  Free the passed-in gdb_reg_value.
        (jit_dealloc_cache): Adjust to free the regcache.
        (jit_frame_sniffer): Allocate a regcache instead of an array of
        gdb_reg_value pointers.
        (jit_frame_this_id): Adjust.
        (jit_frame_prev_register): Read raw registers off of the regcache
        instead of from the gdb_reg_value pointer array.  Use
        gdbarch_pseudo_register_read_value to read pseudo registers.
        * regcache.c (regcache_raw_set_cached_value): New function,
        factored out from ...
        (regcache_raw_write): ... here.
        * regcache.h (regcache_raw_set_cached_value): Declare.

2016-07-01  Pedro Alves  <palves@redhat.com>
            Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * inf-ptrace.c (inf_ptrace_detach_success): New function, factored
        out from ...
        (inf_ptrace_detach): ... here.
        * inf-ptrace.h (inf_ptrace_detach_success): New declaration.
        * linux-nat.c (get_pending_status): Rename to ...
        (get_detach_signal): ... this, and return a host signal instead of
        filling in a wait status.
        (detach_one_lwp): New function, factored out from detach_callback
        and adjusted to handle detaching from a zombie thread.
        (detach_callback): Skip the leader thread.
        (linux_nat_detach): No longer defer to inf_ptrace_detach to detach
        the leader thread, nor build a signal string to pass down.
        Instead, use target_announce_detach, detach_one_lwp and
        inf_ptrace_detach_success.

2016-07-01  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (breakpoint_init_inferior): Discard watchpoint
        locations.
        * infcmd.c (detach_command): Call breakpoint_init_inferior.

2016-07-01  Pedro Alves  <palves@redhat.com>

        * darwin-nat.c (darwin_detach): Use target_announce_detach.
        * inf-ptrace.c (inf_ptrace_detach): Likewise.
        * nto-procfs.c (procfs_detach): Likewise.
        * remote.c (remote_detach_1): Likewise.
        * target.c (target_announce_detach): New function.
        * target.h (target_announce_detach): New declaration.

2016-06-29  Tom Tromey  <tom@tromey.com>

        PR python/20129:
        * python/lib/gdb/command/frame_filters.py (_do_enable_frame_filter)
        (SetFrameFilterPriority._set_filter_priority): Use "frame_filter",
        not "name".

2016-06-29  Tom Tromey  <tom@tromey.com>

        PR gdb/17210:
        * target.c (free_memory_read_result_vector): Take a pointer to the
        VEC as an argument.
        (read_memory_robust): Install a cleanup for "result".
        * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update.

2016-06-29  Manish Goregaokar  <manish@mozilla.com>

        * rust-lang.c (rust_get_disr_info): Initialize saveptr to NULL.

2016-06-29  Manish Goregaokar  <manish@mozilla.com>

        * rust-lang.c (rust_get_disr_info): Use strtok_r instead of strsep.

2016-06-28  Yao Qi  <yao.qi@linaro.org>

        * aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
        variable new_offset.

2016-06-27  Manish Goregaokar  <manish@mozilla.com>

        * rust-lang.c (rust_print_type, rust_decorations): Print unit
        types as "()".
        (rust_print_type): Omit return type for functions returning unit.

2016-06-25  Pierre-Marie de Rodat  <derodat@adacore.com>

        * python/py-breakpoint.c (bppy_init): Clear bppy_pending_object
        when there is an error during the breakpoint creation.

2016-06-25  Tom Tromey  <tom@tromey.com>

        * rust-lang.c (rust_get_disr_info, rust_print_type): Fix
        formatting.

2016-06-25  Manish Goregaokar  <manish@mozilla.com>

        PR gdb/20239
        * rust-lang.c (rust_get_disr_info): Correctly interpret
        NonZero-optimized enums of arbitrary depth.
        (rust_print_type): Correctly print NonZero-optimized
        enums.

2016-06-24  David Taylor  <dtaylor@emc.com>

        PR gdb/17520 Structure offset wrong when 1/4 GB or greater.
        * c-lang.h: Change all parameters, variables, and struct or union
        members used as struct or union fie3ld offsets from int to
        LONGEST.
        * c-valprint.c: Likewise.
        * cp-abi.c: Likewise.
        * cp-abi.h: Likewise.
        * cp-valprint.c: Likewise.
        * d-valprint.c: Likewise.
        * dwarf2loc.c: Likewise.
        * eval.c: Likewise.
        * extension-priv.h: Likewise.
        * extension.c: Likewise.
        * extension.h: Likewise.
        * findvar.c: Likewise.
        * gdbtypes.h: Likewise.
        * gnu-v2-abi.c: Likewise.
        * gnu-v3-abi.c: Likewise.
        * go-valprint.c: Likewise.
        * guile/guile-internal.h: Likewise.
        * guile/scm-pretty-print.c: Likewise.
        * jv-valprint.c Likewise.
        * opencl-lang.c: Likewise.
        * p-lang.h: Likewise.
        * python/py-prettyprint.c: Likewise.
        * python/python-internal.h: Likewise.
        * spu-tdep.c: Likewise.
        * typeprint.c: Likewise.
        * valarith.c: Likewise.
        * valops.c: Likewise.
        * valprint.c: Likewise.
        * valprint.h: Likewise.
        * value.c: Likewise.
        * value.h: Likewise.
        * p-valprint.c: Likewise.
        * c-typeprint.c (c_type_print_base): When printing offset, use
        plongest, not %d.
        * gdbtypes.c (recursive_dump_type): Ditto.

2016-06-24  David Taylor  <david.taylor@emc.com>

        * MAINTAINERS (Write After Approval): Add David Taylor.

2016-06-24  John Baldwin  <jhb@FreeBSD.org>

        * configure.ac: Check for support for system call LWP fields on
        FreeBSD.
        * config.in, configure: Rebuild.
        * data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml.
        * fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
        Report system call events.
        [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]
        (fbsd_set_syscall_catchpoint): New function.
        (fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
        Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint".
        * fbsd-tdep.c: Include xml-syscall.h
        (fbsd_get_syscall_number): New function.
        (fbsd_init_abi): Set XML system call file name.
        Add "get_syscall_number" gdbarch method.
        * syscalls/freebsd.xml: New file.

2016-06-24  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c: Include "auxv.h".
        (fbsd_print_auxv_entry): New function.
        (fbsd_init_abi): Install gdbarch "print_auxv_entry" method.

2016-06-24  John Baldwin  <jhb@FreeBSD.org>

        * auxv.c (fprint_auxv_entry): New function.
        (default_print_auxv_entry): New function.
        (fprint_target_auxv): Use gdbarch_print_auxv_entry.
        * auxv.h (enum auxv_format): New enum.
        (fprint_auxv_entry): Declare.
        (default_print_auxv_entry): Declare.
        * gdbarch.sh (print_auxv_entry): New.
        * gdbarch.c, gdbarch.h: Re-generated.

2016-06-24  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c [KERN_PROC_AUXV] New variable super_xfer_partial.
        (fbsd_xfer_partial): New function.
        (fbsd_nat_add_target) [KERN_PROC_AUXV] Set "to_xfer_partial" to
        "fbsd_xfer_partial".

2016-06-23  Tom Tromey  <tom@tromey.com>

        * symtab.c (symbol_find_demangled_name): Loop over languages and
        use language_sniff_from_mangled_name.
        * rust-lang.c (rust_sniff_from_mangled_name): New function.
        (rust_language_defn): Update.
        * p-lang.c (pascal_language_defn): Update.
        * opencl-lang.c (opencl_language_defn): Update.
        * objc-lang.c (objc_sniff_from_mangled_name): New function.
        (objc_language_defn): Update.
        * m2-lang.c (m2_language_defn): Update.
        * language.h (struct language_defn) <la_sniff_from_mangled_name>: New
        field.
        (language_sniff_from_mangled_name): Declare.
        * language.c (language_sniff_from_mangled_name): New function.
        (unknown_language_defn, auto_language_defn, local_language_defn):
        Update.
        * jv-lang.c (java_sniff_from_mangled_name): New function.
        (java_language_defn): Use it.
        * go-lang.c (go_sniff_from_mangled_name): New function.
        (go_language_defn): Use it.
        * f-lang.c (f_language_defn): Update.
        * defs.h (enum language): Reorder.
        * d-lang.c (d_sniff_from_mangled_name): New function.
        (d_language_defn): Use it.
        * cp-support.h (gdb_sniff_from_mangled_name): Declare.
        * cp-support.c (gdb_sniff_from_mangled_name): New function.
        * c-lang.c (c_language_defn, cplus_language_defn)
        (asm_language_defn, minimal_language_defn): Update.
        * ada-lang.c (ada_sniff_from_mangled_name): New function.
        (ada_language_defn): Use it.

2016-06-23  Tom Tromey  <tom@tromey.com>

        * ada-lang.c (ada_extensions): New array.
        (ada_language_defn): Use it.
        * c-lang.c (c_extensions): New array.
        (c_language_defn): Use it.
        (cplus_extensions): New array.
        (cplus_language_defn): Use it.
        (asm_extensions): New array.
        (asm_language_defn): Use it.
        (minimal_language_defn): Update.
        * d-lang.c (d_extensions): New array.
        (d_language_defn): Use it.
        * f-lang.c (f_extensions): New array.
        (f_language_defn): Use it.
        * go-lang.c (go_language_defn): Update.
        * jv-lang.c (java_extensions): New array.
        (java_language_defn): Use it.
        * language.c (add_language): Call add_filename_language.
        (unknown_language_defn, auto_language_defn, local_language_defn):
        Update.
        * language.h (struct language_defn) <la_filename_extensions>: New
        field.
        * m2-lang.c (m2_language_defn): Update.
        * objc-lang.c (objc_extensions): New array.
        (objc_language_defn): Use it.
        * opencl-lang.c (opencl_language_defn): Update.
        * p-lang.c (p_extensions): New array.
        (pascal_language_defn): Use it.
        * rust-lang.c (rust_extensions): New array.
        (rust_language_defn): Use it.
        * symfile.c (add_filename_language): No longer static.  Make "ext"
        const.
        (init_filename_language_table): Remove.
        (_initialize_symfile): Update.
        * symfile.h (add_filename_language): Declare.

2016-06-23  Tom Tromey  <tom@tromey.com>

        * symfile.c (filename_language_table): Now a VEC.
        (fl_table_size, fl_table_next): Remove.
        (add_filename_language): Use VEC_safe_push.
        (set_ext_lang_command, info_ext_lang_command)
        (deduce_language_from_filename): Use VEC_iterate.
        (init_filename_language_table): Use VEC_empty.

2016-06-23  Tom Tromey  <tom@tromey.com>

        * python/python.c (gdbpy_parameter): Now static.
        * python/python-internal.h (gdbpy_parameter): Don't declare.

2016-06-23  Tom Tromey  <tom@tromey.com>

        PR gdb/16483:
        * python/lib/gdb/command/frame_filters.py
        (InfoFrameFilter.list_frame_filters): Rename to print_list.  Print
        nothing if no filters found.  Return value indicating whether
        filters were printed.
        (InfoFrameFilter.print_list): Remove.
        (InfoFrameFilter.invoke): Print message if no frame filters
        found.

2016-06-21  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * f-valprint.c (f_val_print): Add field names for printing
        derived types fields.

2016-06-21  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_iterate_over_regset_sections): Fix typo
        in name of last-break regset.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * fork-child.c (fork_inferior): Switch the child to the main UI
        right after vfork.  Save/restore the current UI in the parent.
        Flush outputs of the main UI instead of the current UI.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (watchpoint_check): Send watchpoint-deleted output
        to all UIs.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention support for running interpreters on separate
        UIs and the new new-ui command.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * interps.c (set_top_level_interpreter): New function, factored
        out from captured_main.
        (interpreter_completer): Make extern.
        * interps.h (set_top_level_interpreter, interpreter_completer):
        New declarations.
        (captured_main): Use set_top_level_interpreter.
        * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0.
        (open_terminal_stream, new_ui_command): New functions.
        (init_main): Install the "new-ui" command.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
        (read_command_lines): Use input_interactive_p instead of
        input_from_terminal_p.
        * defs.h (struct ui): Forward declare.
        (input_from_terminal_p): Rename to ...
        (input_interactive_p): ... this.
        * event-top.c (stdin_event_handler): Pass 0 as from_tty argument
        to quit_command.
        (command_handler): Adjust to per-UI stdin.
        (handle_line_of_input): Adjust to per-UI stdin and use
        input_interactive_p instead of ISATTY and input_from_terminal_p.
        (gdb_readline_no_editing_callback): Adjust to per-UI stdin.
        (command_line_handler): Always pass true as "from_tty" parameter
        of handle_line_of_input and execute_command.
        (async_sigterm_handler): Pass 0 as from_tty argument to
        quit_command.
        * inflow.c (interactive_mode, show_interactive_mode): Moved to ...
        (gdb_has_a_terminal): Don't check interactive_mode here.
        (_initialize_inflow): Don't install "set interactive-mode" here.
        * main.c (captured_command_loop): Adjust to per-UI stdin.
        * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
        stdin.
        * top.c (new_ui): Save the stdin stream and whether it's a tty.
        (dont_repeat): Adjust to per-UI stdin.
        (command_line_input): Adjust to per-UI stdin and to use
        input_interactive_p.
        (quit_force): Write history if any UI supports interactive input.
        (interactive_mode, show_interactive_mode): Move here, from
        inflow.c.
        (input_from_terminal_p): Rename to ...
        (input_interactive_p): ... this, and check the "interactive_mode"
        global instead of calling gdb_has_a_terminal.
        (_initialize_top): Install "set interactive-mode" here.
        * top.h (struct ui) <stdin_stream, input_interactive_p>: New
        fields.
        * utils.c (quit): Pass 0 as from_tty argument to quit_force.
        (defaulted_query): Adjust to per-UI stdin and to use
        input_interactive_p.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c (stdin_event_handler): Don't quit gdb if it was a
        secondary UI's input stream that closed.  Instead, just delete the
        UI.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c (main_ui_): Delete.
        (main_ui, current_ui, ui_list): No longer initialize here.
        * main.c (captured_main): UI initialization code factored out to
        new new_ui function.
        (gdb_main): Wrap captured_main with TRY/CATCH instead of
        catch_errors.
        * top.c (highest_ui_num): New global.
        (new_ui): New function.
        * top.h (struct ui) <num>: New field.
        (new_ui): New declaration.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c (cli_on_normal_stop): Bail out early if there's
        nothing to print.  Use should_print_stop_to_console.
        * tui/tui-interp.c (tui_on_normal_stop): Likewise.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (new_until_break_fsm): Add 'cmd_interp' parameter.
        (until_break_fsm_should_stop, until_break_fsm_clean_up): Add
        thread parameter.
        (until_break_command): Pass command interpreter to thread fsm
        ctor.
        * cli/cli-interp.c (should_print_stop_to_console): Adjust.
        * gdbthread.h (struct thread_control_state) <command_interp>:
        Delete field.
        * infcall.c (new_call_thread_fsm): Add 'cmd_interp' parameter.
        Pass it down.
        (call_thread_fsm_should_stop): Add thread parameter.
        (call_function_by_hand_dummy): Pass command interpreter to thread
        fsm ctor.  Pass thread pointer to fsm clean up method.
        * infcmd.c: Include interps.h.
        (struct step_command_fsm) <thread>: Delete field.
        (new_step_command_fsm): Add 'cmd_interp' parameter.  Pass it down.
        (step_command_fsm_prepare): Remove references to fsm's thread
        field.
        (step_1): Pass command interpreter to thread
        fsm ctor.  Pass thread pointer to fsm clean up method.
        (step_command_fsm_should_stop, step_command_fsm_clean_up): Add
        thread parameter and use it.
        (new_until_next_fsm): Add 'cmd_interp' parameter.  Pass it down.
        (until_next_fsm_should_stop, until_next_fsm_clean_up): Add thread
        parameter and use it.
        (until_next_command): Pass command interpreter to thread fsm ctor.
        (struct finish_command_fsm) <thread>: Delete field.
        (finish_command_fsm_ops): Add NULL slot for should_notify_stop.
        (new_finish_command_fsm): Add 'cmd_interp' parameter and pass it
        down.  Remove thread parameter and adjust.
        (finish_command_fsm_should_stop, finish_command_fsm_clean_up): Add
        thread parameter and use it.
        (finish_command): Pass command interpreter to thread fsm ctor.
        Don't pass thread.
        * infrun.c (follow_fork): Move thread fsm to child fork instead of
        command interpreter, only.
        (clear_proceed_status_thread): Remove reference to command_interp.
        (proceed): Don't record the thread's command interpreter.
        (clean_up_just_stopped_threads_fsms): Pass thread to fsm clean_up
        method.
        (fetch_inferior_event): Pass thread to fsm should_stop method.
        * thread-fsm.c (thread_fsm_ctor): Add 'cmd_interp' parameter.
        Store it.
        (thread_fsm_clean_up, thread_fsm_should_stop): Add thread
        parameter and pass it down.
        * thread-fsm.h (struct thread_fsm) <command_interp>: New field.
        (struct thread_fsm_ops) <clean_up, should_stop>: Add thread
        parameter.
        (thread_fsm_ctor): Add 'cmd_interp' parameter.
        (thread_fsm_clean_up, thread_fsm_should_stop): Add thread
        parameter.
        * thread.c (thread_cancel_execution_command): Pass thread to
        thread fsm clean_up method.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c: Include gdbthread.h and thread-fsm.h.
        (should_print_stop_to_console): New function, factored out from
        mi_on_normal_stop_1.
        * cli/cli-interp.h (should_print_stop_to_console): Declare.
        * mi/mi-interp.c (mi_on_normal_stop_1): Use
        should_print_stop_to_console.  Pass it the current UI's console
        interpreter.
        * mi/mi-main.c (captured_mi_execute_command): Use the
        INTERP_CONSOLE symbol rather than explicit "console".

2016-06-21  Pedro Alves  <palves@redhat.com>

        * infcmd.c (prepare_execution_command): Use
        all_uis_on_sync_execution_starting.
        * infrun.c (all_uis_on_sync_execution_starting): New function.
        * infrun.h (all_uis_on_sync_execution_starting): Declare.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * annotate.c: Include top.h.
        (async_background_execution_p): Delete.
        (print_value_flags): Check the UI's prompt state rather then
        async_background_execution_p.
        * event-loop.c (start_event_loop): Set the prompt state to
        PROMPT_NEEDED.
        * event-top.c (display_gdb_prompt, async_enable_stdin)
        (async_disable_stdin): Check the current UI's prompt state instead
        of the sync_execution global.
        (command_line_handler): Set the prompt state to PROMPT_NEEDED
        before running a command, and display the prompt if still needed
        afterwards.
        * infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
        (new_call_thread_fsm): New parameter 'waiting_ui'.  Store it.
        (call_thread_fsm_should_stop): Set the prompt state to
        PROMPT_NEEDED.
        (run_inferior_call): Adjust to temporarily set the prompt state to
        PROMPT_BLOCKED instead of using the sync_execution global.
        (call_function_by_hand_dummy): Pass the current UI to
        new_call_thread_fsm.
        * infcmd.c: Include top.h.
        (continue_1): Check the current UI's prompt state instead of the
        sync_execution global.
        (continue_command): Validate global execution state before calling
        prepare_execution_command.
        (step_1): Call all_uis_check_sync_execution_done.
        (attach_post_wait): Don't call async_enable_stdin here.  Remove
        reference to sync_execution.
        * infrun.c (sync_execution): Delete global.
        (follow_fork_inferior)
        (reinstall_readline_callback_handler_cleanup): Check the current
        UI's prompt state instead of the sync_execution global.
        (check_curr_ui_sync_execution_done)
        (all_uis_check_sync_execution_done): New functions.
        (fetch_inferior_event): Call all_uis_check_sync_execution_done
        instead of trying to determine whether the global sync execution
        changed.
        (handle_no_resumed): Check the prompt state of all UIs.
        (normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
        UIs.  Emit the "Switching to" notification to all UIs.  Enable
        stdin in all UIs.
        * infrun.h (sync_execution): Delete.
        (all_uis_check_sync_execution_done): Declare.
        * main.c (captured_command_loop): Don't call
        interp_pre_command_loop if the prompt is blocked.
        (catch_command_errors, catch_command_errors_const): Adjust.
        (captured_main): Set the initial prompt state to PROMPT_NEEDED.
        * mi/mi-interp.c (display_mi_prompt): Set the prompt state to
        PROMPTED.
        (mi_interpreter_resume): Don't clear sync_execution.  Remove hack
        comment.
        (mi_execute_command_input_handler): Set the prompt state to
        PROMPT_NEEDED before executing the command, and only display the
        prompt if the prompt state is PROMPT_NEEDED afterwards.
        (mi_on_resume_1): Adjust to check the prompt state.
        * target.c (target_terminal_inferior): Adjust to check the prompt
        state.
        * top.c (wait_sync_command_done, maybe_wait_sync_command_done)
        (execute_command): Check the current UI's prompt state instead of
        sync_execution.
        * top.h (enum prompt_state): New.
        (struct ui) <prompt_state>: New field.
        (ALL_UIS): New macro.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * top.c (gdb_secondary_prompt_depth): Delete.
        (gdb_in_secondary_prompt_p): Add ui parameter.  Use it.
        (gdb_readline_wrapper_cleanup, gdb_readline_wrapper): Adjust to
        per-UI gdb_secondary_prompt_depth.
        * top.h (struct ui) <secondary_prompt_depth>: New field.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c (cli_interpreter_pre_command_loop): New
        function.
        (cli_interp_procs): Install it instead of cli_command_loop.
        * cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
        * event-top.c (cli_command_loop): Delete.
        * interps.c (interp_new): Remove reference to command_loop_proc.
        (current_interp_command_loop): Delete.
        (interp_pre_command_loop): New function.
        (interp_command_loop_ftype): Delete.
        * interps.h (interp_pre_command_loop_ftype): New typedef.
        (struct interp_procs) <command_loop_proc>: Delele field.
        <pre_command_loop_proc>: New field.
        (current_interp_command_loop): Delete declaration.
        (interp_pre_command_loop): New declaration.
        * main.c (captured_command_loop): Call interp_pre_command_loop
        instead of current_interp_command_loop and start an event loop.
        * mi/mi-interp.c (mi_command_loop): Delete.
        (mi_interpreter_pre_command_loop): New.
        (mi_interp_procs): Update.
        * tui/tui-interp.c (tui_interp_procs): Install
        cli_interpreter_pre_command_loop instead of cli_command_loop.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * interps.c (current_interpreter): New function.
        * interps.h (current_interpreter): New declaration.
        * mi/mi-cmds.h (raw_stdout): Delete declaration.
        * mi/mi-common.h (struct mi_interp) <raw_stdout,
        saved_raw_stdout>: New field.
        * mi/mi-interp.c (display_mi_prompt): New parameter 'mi'.  Adjust
        to per-UI raw_stdout.
        (mi_interpreter_init): Adjust to per-UI raw_stdout.
        (mi_on_sync_execution_done, mi_execute_command_input_handler)
        (mi_command_loop): Pass MI instance to display_mi_prompt.
        (mi_on_normal_stop_1, mi_output_running_pid, mi_on_resume_1)
        (mi_on_resume): Adjust to per-UI raw_stdout.
        (saved_raw_stdout): Delete.
        (mi_set_logging): Adjust to per-UI raw_stdout and
        saved_raw_stdout.
        * mi/mi-main.c (raw_stdout): Delete.
        (mi_cmd_gdb_exit, captured_mi_execute_command)
        (mi_print_exception, mi_load_progress): Adjust to per-UI
        raw_stdout.
        (print_diff_now, mi_print_timing_maybe): New ui_file parameter.
        Pass it along.
        (print_diff): New ui_file parameter.  Send output there instead of
        raw_stdout.
        * mi/mi-main.h (struct ui_file): Forward declare.
        (mi_print_timing_maybe): Add ui_file parameter.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * mi/mi-interp.c (display_mi_prompt): New function.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * target.c (target_terminal_inferior): Bail out after
        unregistering input_fd if not on the main UI.
        (target_terminal_ours): Bail out after registering input_fd if not
        on the main UI.
        (target_terminal_ours_for_output): Bail out if not on the main UI.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c (restore_ui_cleanup): Make extern.
        * infrun.c (fetch_inferior_event): Always switch to the main UI.
        * top.h (restore_ui_cleanup): Declare.

2016-06-21  Pedro Alves  <palves@redhat.com>

        PR mi/20034
        * cli/cli-interp.c: Include cli-interp.h and event-top.h.
        (cli_interpreter_resume): Pass 1 to gdb_setup_readline.  Set the
        UI's input_handler here.
        (cli_interpreter_supports_command_editing): New function.
        (cli_interp_procs): Install it.
        * cli/cli-interp.h: New file.
        * event-top.c (async_command_editing_p): Rename to ...
        (set_editing_cmd_var): ... this.
        (change_line_handler): Add parameter 'editing', and use it.  Bail
        early if the interpreter doesn't support editing.  Don't touch
        readline state if editing is off.
        (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
        (gdb_rl_callback_handler_reinstall): Assert the current UI is the
        main UI.
        (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if
        not using readline.  Check whether the current UI is using command
        editing instead of checking the async_command_editing_p global.
        (set_async_editing_command): Delete.
        (gdb_setup_readline): Add 'editing' parameter.  Only allow editing
        on the main UI.  Don't touch readline state if editing is off.
        (gdb_disable_readline): Don't touch readline state if editing is
        off.
        * event-top.h (gdb_setup_readline): Add 'int' parameter.
        (set_async_editing_command): Delete declaration.
        (change_line_handler, command_line_handler): Declare.
        (async_command_editing_p): Rename to ...
        (set_editing_cmd_var): ... this.
        * infrun.c (reinstall_readline_callback_handler_cleanup): Check
        whether the current UI has editing enabled rather than checking
        the async_command_editing_p global.
        * interps.c (interp_supports_command_editing): New function.
        * interps.h (interp_supports_command_editing_ftype): New typedef.
        (struct interp_procs) <supports_command_editing_proc>: New field.
        (interp_supports_command_editing): Declare.
        * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to
        gdb_setup_readline.  Don't clear the async_command_editing_p
        global.  Update comments.
        * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check
        whether the current UI has editing enabled rather than checking
        the async_command_editing_p global.  Don't touch readline state if
        editing is off.
        (undo_terminal_modifications_before_exit): Switch to the main UI.
        Unconditionally call gdb_disable_readline.
        (set_editing): New function.
        (show_async_command_editing_p): Rename to ...
        (show_editing): ... this.  Show the state of the current UI.
        (_initialize_top): Adjust.
        * top.h (struct ui) <command_editing>: New field.
        * tui/tui-interp.c: Include cli/cli-interp.h.
        (tui_resume): Pass 1 to gdb_setup_readline.  Set the UI's
        input_handler.
        (tui_interp_procs): Install
        cli_interpreter_supports_command_editing.
        * tui/tui-io.c (tui_getc): Check whether the current UI has
        editing enabled rather than checking the async_command_editing_p
        global.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * top.c: Call gen_ret_current_ui_field_ptr for current_uiout.
        * top.h (struct ui) <m_current_uiout>: New field.
        * ui-out.c (current_uiout): Delete.
        * ui-out.h (current_uiout): Delete.
        (current_ui_current_uiout_ptr): New declaration.
        (current_uiout): Reimplement as wrapper around
        current_ui_current_uiout_ptr.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * ui-out.c (default_ui_out_impl): Delete.
        (def_uiout): Delete.
        (current_uiout): Set to NULL.
        (default_table_begin, default_table_body, default_table_end)
        (default_table_header, default_begin, default_end)
        (default_field_int, default_field_skip, default_field_string)
        (default_field_fmt, default_spaces, default_text, default_message)
        (default_wrap_hint, default_flush, default_data_destroy): Delete.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c (gdb_setup_readline): Pass the UI's outstream and
        errstream to stdout_fileopen and stderr_fileopen.
        * exceptions.c: Include top.h.
        (print_flush): Open the current UI's outstream file descriptor,
        instead of hardcoding file descriptor 1.
        * main.c (captured_main): Save the main UI's out and error
        streams.  Adjust stderr_fileopen call.
        * top.h (struct ui) <outstream, errstream>: New fields.
        * ui-file.c (stderr_fileopen): Add stream parameter.  Use it
        instead of stderr.
        * ui-file.h (stderr_fileopen): Add stream parameter and update
        comment.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c (input_fd): Delete.
        (stdin_event_handler): Switch to the UI whose input descriptor got
        the event.  Adjust to per-UI input_fd.
        (gdb_setup_readline): Don't set the input_fd global.  Adjust to
        per-UI input_fd.
        (gdb_disable_readline): Adjust to per-UI input_fd.
        * event-top.h (input_fd): Delete declaration.
        * linux-nat.c (linux_nat_terminal_inferior): Don't remove input_fd
        from the event-loop here.
        (linux_nat_terminal_ours): Don't register input_fd in the
        event-loop here.
        * main.c (captured_main): Adjust to per-UI input_fd.
        * remote.c (remote_terminal_inferior): Don't remove input_fd from
        the event-loop here.
        (remote_terminal_ours): Don't register input_fd in the event-loop
        here.
        * target.c: Include top.h and event-top.h.
        (target_terminal_inferior): Remove input_fd from the event-loop
        here.
        (target_terminal_ours): Register input_fd in the event-loop.
        * top.h (struct ui) <input_fd>: New field.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-script.c (execute_user_command, read_next_line)
        (read_next_line): Adjust to per-UI instream.
        * event-top.c (stdin_event_handler, command_handler)
        (handle_line_of_input, command_line_handler)
        (gdb_readline_no_editing_callback, async_sigterm_handler)
        (gdb_setup_readline): Likewise.
        * inflow.c: Include top.h.
        (gdb_has_a_terminal, child_terminal_init_with_pgrp)
        (gdb_save_tty_state, child_terminal_inferior)
        (child_terminal_ours_1, copy_terminal_info): Use the main UI.
        (initialize_stdin_serial): Adjust to per-UI instream.
        * main.c (captured_command_loop, captured_main): Adjust to per-UI
        instream.
        * mi/mi-interp.c (mi_execute_command_wrapper): Likewise.
        * python/python.c (python_interactive_command): Likewise.
        * terminal.h (struct ui): Forward declare.
        (initialize_stdin_serial): Add struct ui parameter.
        * top.c (instream): Delete.
        (do_restore_instream_cleanup, read_command_file, dont_repeat)
        (gdb_readline_no_editing, command_line_input)
        (input_from_terminal_p, gdb_init): Adjust to per-UI instream.
        * top.h (struct ui) <instream>: New field.
        (instream): Delete declaration.
        (quit): Adjust to per-UI instream.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-loop.c: Include top.h.
        (invoke_async_signal_handlers): Switch to the main UI.
        * event-top.c (main_ui_): Update comment.
        (main_ui): New global.
        * top.h (main_ui): Declare.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c (cli_interp): Delete.
        (as_cli_interp): New function.
        (cli_on_normal_stop, cli_on_signal_received)
        (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
        (cli_on_no_history): Send output to all CLI UIs.
        (cli_on_sync_execution_done, cli_on_command_error): Skip output if
        the top level interpreter is not a CLI.
        (cli_interpreter_init): Don't set cli_interp or install observers
        here.
        (_initialize_cli_interp): Install observers here.
        * event-top.c (main_ui_, ui_list): New globals.
        (current_ui): Point to main_ui_.
        (restore_ui_cleanup, switch_thru_all_uis_init)
        (switch_thru_all_uis_cond, switch_thru_all_uis_next): New
        functions.
        * mi/mi-interp.c (as_mi_interp): New function.
        (mi_interpreter_init): Don't install observers here.
        (mi_on_sync_execution_done): Skip output if the top level
        interpreter is not a MI.
        (mi_new_thread, mi_thread_exit, mi_record_changed)
        (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit)
        (mi_inferior_removed): Send output to all MI UIs.
        (find_mi_interpreter, mi_interp_data): Delete.
        (find_mi_interp): New function.
        (mi_on_signal_received, mi_on_end_stepping_range)
        (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output
        to all MI UIs.
        (mi_on_normal_stop): Rename to ...
        (mi_on_normal_stop_1): ... this.
        (mi_on_normal_stop): Reimplement, sending output to all MI UIs.
        (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted)
        (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted)
        (mi_breakpoint_modified, mi_output_running_pid): Send output to
        all MI UIs.
        (mi_on_resume): Rename to ...
        (mi_on_resume_1): ... this.  Don't handle infcalls here.
        (mi_on_resume): Reimplement, sending output to all MI UIs.
        (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
        (mi_memory_changed): Send output to all MI UIs.
        (report_initial_inferior): Install observers here.
        * top.h (struct ui) <next>: New field.
        (ui_list): Declare.
        (struct switch_thru_all_uis): New.
        (switch_thru_all_uis_init, switch_thru_all_uis_cond)
        (switch_thru_all_uis_next): Declare.
        (SWITCH_THRU_ALL_UIS): New macro.
        * tui/tui-interp.c (tui_interp): Delete global.
        (as_tui_interp): New function.
        (tui_on_normal_stop, tui_on_signal_received)
        (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
        (tui_on_no_history): Send output to all TUI UIs.
        (tui_on_sync_execution_done, tui_on_command_error): Skip output if
        the top level interpreter is not a TUI.
        (tui_init): Don't set tui_interp or install observers here.
        (_initialize_tui_interp): Install observers here.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c (cli_uiout): Delete, moved into ...
        (struct cli_interp): ... this new structure.
        (cli_on_normal_stop, cli_on_signal_received)
        (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
        (cli_on_no_history): Use interp_ui_out.
        (cli_interpreter_init): If top level, set the cli_interp global.
        (cli_interpreter_init): Return the interp's data instead of NULL.
        (cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
        to cli_uiout being in the interpreter's data.
        (cli_interp_procs): New, factored out from _initialize_cli_interp.
        (cli_interp_factory): New function.
        (_initialize_cli_interp): Call interp_factory_register.
        * interps.c (get_interp_info): New, factored out from ...
        (get_current_interp_info): ... this.
        (interp_new): Add parameter 'data'.  Store it.
        (struct interp_factory): New function.
        (interp_factory_p): New typedef.  Define a VEC_P.
        (interpreter_factories): New global.
        (interp_factory_register): New function.
        (interp_add): Add 'ui' parameter.  Use get_interp_info and
        interp_lookup_existing.
        (interp_lookup): Rename to ...
        (interp_lookup_existing): ... this.  Add 'ui' parameter.  Don't
        check for NULL or empty name here.
        (interp_lookup): Add 'ui' parameter and reimplement.
        (interp_set_temp, interpreter_exec_cmd): Adjust.
        (interpreter_completer): Complete on registered interpreter
        factories instead of interpreters.
        * interps.h (interp_factory_func): New typedef.
        (interp_factory_register): Declare.
        (interp_new, interp_add): Adjust.
        (interp_lookup): Declare.
        * main.c (captured_main): Adjust.
        * mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
        (mi_interp_procs): New, factored out from
        _initialize_mi_interp.
        (mi_interp_factory): New function.
        * python/python.c (execute_gdb_command): Adjust.
        * tui/tui-interp.c (tui_init): If top level, set the tui_interp
        global.
        (tui_interp_procs): New.
        (tui_interp_factory): New function.
        (_initialize_tui_interp): Call interp_factory_register.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (bpstat_do_actions_1): Access the current UI's
        async field instead of the interpreter_async global.
        * cli/cli-script.c (execute_user_command, while_command)
        (if_command, script_from_file): Likewise.
        * compile/compile.c: Include top.h instead of interps.h.
        (compile_file_command, compile_code_command)
        (compile_print_command): Access the current UI's async field
        instead of the interpreter_async global.
        * guile/guile.c: Include top.h instead of interps.h.
        (guile_repl_command, guile_command, gdbscm_execute_gdb_command):
        Access the current UI's async field instead of the
        interpreter_async global.
        * guile/scm-ports.c: Include top.h instead of interps.h.
        (ioscm_with_output_to_port_worker): Access the current UI's async
        field instead of the interpreter_async global.
        * inf-loop.c (inferior_event_handler): Likewise.
        * infcall.c (run_inferior_call): Likewise.
        * infrun.c (reinstall_readline_callback_handler_cleanup)
        (fetch_inferior_event): Likewise.
        * interps.c (interpreter_async): Delete.
        (struct ui_interp_info): New.
        (get_current_interp_info): New function.
        (interp_list, current_interpreter, top_level_interpreter_ptr):
        Delete.
        (interp_add, interp_set, interp_lookup, interp_ui_out)
        (current_interp_set_logging, interp_set_temp)
        (current_interp_named_p): Adjust to per-UI interpreters.
        (command_interpreter): Delete.
        (command_interp, current_interp_command_loop, interp_quiet_p)
        (interp_exec, interpreter_exec_cmd, interpreter_completer)
        (top_level_interpreter, top_level_interpreter_data): Adjust to
        per-UI interpreters.
        * interps.h (interpreter_async): Delete.
        * main.c (captured_command_loop): Access the current UI's async
        field instead of the interpreter_async global.
        * python/python.c (python_interactive_command, python_command)
        (execute_gdb_command): Likewise.
        * top.c (maybe_wait_sync_command_done, execute_command_to_string):
        Access the current UI's async field instead of the
        interpreter_async global.
        * top.h (struct tl_interp_info): Forward declare.
        (struct ui) <interp_info, async>: New fields.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * main.c (gdb_stdout, gdb_stderr, gdb_stdlog, gdb_stdin): Delete
        globals.
        (gen_ret_current_ui_field_ptr): New macro.  Use it to generate
        wrappers for gdb_stdout, gdb_stderr, gdb_stdlog and gdb_stdin.
        * top.h (struct ui) <m_gdb_stdout, m_gdb_stdin, m_gdb_stderr,
        m_gdb_stdlog>: New fields.
        (current_ui_gdb_stdout_ptr, current_ui_gdb_stdin_ptr)
        (current_ui_gdb_stderr_ptr, current_ui_gdb_stdlog_ptr): Declare.
        (gdb_stdout, gdb_stdin, gdb_stderr, gdb_stdlog): Reimplement as
        macros.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c: Update readline-related comments.
        (input_handler, call_readline): Delete globals.
        (gdb_rl_callback_handler): Call the current UI's input_handler
        method.
        (change_line_handler): Adjust to set current UI's properties
        instead of globals.
        (current_ui_, current_ui): New globals.
        (get_command_line_buffer): Rewrite to refer to the current UI.
        (stdin_event_handler): Adjust to call the call_readline method of
        the current UI.
        (gdb_readline_no_editing_callback): Adjust to call the current UI's
        input_handler method.
        (gdb_setup_readline): Adjust to set current UI's properties
        instead of globals.
        * event-top.h (call_readline, input_handler): Delete declarations.
        * mi/mi-interp.c (mi_interpreter_resume): Adjust to set current
        UI's properties instead of globals.
        * top.c (gdb_readline_wrapper_cleanup): Adjust to set current UI's
        properties instead of globals.
        (gdb_readline_wrapper): Adjust to call and set current UI's
        methods instead of globals.
        * top.h: Include buffer.h and event-loop.h.
        (struct ui): New struct.
        (current_ui): New declaration.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (ada_exception_name_addr_1): Add comment.
        (print_it_exception): Select the current frame.

2016-06-17  Yan-Ting Lin  <currygt52@gmail.com>

        * Makefile.in (ALL_TARGET_OBS): Add nds32-tdep.o.
        (HFILES_NO_SRCDIR): Add nds32-tdep.h.
        (ALLDEPFILES): Add nds32-tdep.c.
        * NEWS: Mention new NDS32 port.
        * configure.tgt: Add NDS32.
        * nds32-tdep.c: New file.
        * nds32-tdep.h: New file.
        * features/Makefile (XMLTOC): Add nds32.xml.
        * features/nds32-core.xml: New file.
        * features/nds32-fpu.xml: New file.
        * features/nds32-system.xml: New file.
        * features/nds32.c: New file (generated).
        * features/nds32.xml: New file.

2016-06-14  John Baldwin  <jhb@FreeBSD.org>

        * v850-tdep.c (v850_use_struct_convention): Trim type length checks.

2016-06-14  John Baldwin  <jhb@FreeBSD.org>

        * tui/tui-stack.c (tui_show_frame_info): Fix type mismatch.

2016-06-14  John Baldwin  <jhb@FreeBSD.org>

        * rs6000-tdep.c (ppc_process_record_op31): Initialize ra.

2016-06-13  Nick Clifton  <nickc@redhat.com>

        * gdbtypes.c (replace_type): Fix assertion.

2016-06-10  Tom Tromey  <tom@tromey.com>

        * gdbtypes.c (arch_type, arch_integer_type, arch_character_type)
        (arch_boolean_type, arch_float_type, arch_complex_type)
        (arch_flags_type, append_flags_type_field)
        (append_flags_type_flag, arch_composite_type)
        (append_composite_type_field_raw)
        (append_composite_type_field_aligned)
        (append_composite_type_field): Make "name" parameter const.
        * gdbtypes.h (arch_type, arch_integer_type, arch_character_type)
        (arch_boolean_type, arch_float_type, arch_complex_type)
        (append_composite_type_field, append_composite_type_field_aligned)
        (append_composite_type_field_raw, arch_flags_type)
        (append_flags_type_field, append_flags_type_flag): Constify.

2016-06-10  Tom Tromey  <tom@tromey.com>

        PR rust/20110:
        * rust-exp.y (lex_number): Don't truncate large numbers to i32.

2016-06-10  Tom Tromey  <tom@tromey.com>

        * Makefile.in (COMMON_OBS): Remove rust-exp.o.
        (YYFILES): Add rust-exp.c.
        (YYOBJ): Add rust-exp.o.
        (local-maintainer-clean): Remove rust-exp.c.

2016-06-09  Toshihito Kikuchi  <k.toshihito@yahoo.de>

        * NEWS: Mention that GDB now supports a negative repeat count in
        the 'x' command.
        * printcmd.c (decode_format): Allow '-' in the parameter
        "string_ptr" to accept a negative repeat count.
        (find_instruction_backward): New function.
        (read_memory_backward): New function.
        (integer_is_zero): New function.
        (find_string_backward): New function.
        (do_examine): Use new functions to examine memory backward.
        (_initialize_printcmd): Mention that 'x' command supports a negative
        repeat count.

2016-06-09  Toshihito Kikuchi  <k.toshihito@yahoo.de>

        * MAINTAINERS (Write After Approval): Add Toshihito Kikuchi.

2016-06-09  Tom Tromey  <tom@tromey.com>

        PR python/19819:
        * python/py-xmethods.c (invoke_method_name)
        (py_get_result_type_method_name, py_invoke_method_name): Remove.
        (gdbpy_initialize_xmethods): Don't initialize
        py_invoke_method_name, py_get_result_type_method_name.

2016-06-07  Simon Marchi  <simon.marchi@ericsson.com>

        * mi/mi-interp.c (mi_record_changed): Add missing braces.

2016-06-07  Bernhard Heckel  <bernhard.heckel@intel.com>

        * findvar.c (follow_static_link): Check for valid pointer.

2016-06-06  Simon Marchi  <simon.marchi@ericsson.com>

        * NEWS: Mention the new fields in =record-started.
        * common/btrace-common.h (btrace_format_short_string): New function
        declaration.
        * common/btrace-common.c (btrace_format_short_string): New
        function.
        * mi/mi-interp.c (mi_record_changed): Output method and format
        fields in the =record-started record.
        * record-btrace.c (record_btrace_open): Adapt record_changed
        notification.
        * record-full.c (record_full_open): Likewise.
        * record.c (cmd_record_stop): Likewise.

2016-06-02  Jon Turney  <jon.turney@dronecode.org.uk>

        * windows-nat.c (handle_output_debug_string): Return type of
        gdb_signal_from_host() is gdb_signal, not an int.
        (windows_get_exec_module_filename): Add pointer casts for C++.

2016-06-02  Tom Tromey  <tom@tromey.com>

        PR python/18984:
        * python/python.c (gdbpy_solib_name): Use GDB_PY_LLU_ARG.

2016-06-01  Pedro Alves  <palves@redhat.com>

        * remote-fileio.c (remote_fio_ctrl_c_flag, remote_fio_sa)
        (remote_fio_osa)
        (remote_fio_ofunc, remote_fileio_sig_init, remote_fileio_sig_set)
        (remote_fileio_sig_exit, remote_fileio_ctrl_c_signal_handler):
        Delete.
        (remote_fileio_o_quit_handler): New global.
        (remote_fileio_quit_handler): New function.
        (remote_fileio_reply): Check the quit flag instead of the custom
        'remote_fio_ctrl_c_flag' flag.  Restore the quit handler instead
        of changing the SIGINT handler.
        (do_remote_fileio_request): Override the quit handler instead of
        changing the SIGINT handler.

2016-06-01  Nick Clifton  <nickc@redhat.com>

        * common/common-utils.c (xmalloc_failed): New function.  Provided
        so that the version in libiberty is not linked in.

2016-06-01  Markus Metzger  <markus.t.metzger@intel.com>

        * infcmd.c (skip_finish_frames): New.
        (finish_command): Call skip_finish_frames.

2016-06-01  Yao Qi  <yao.qi@linaro.org>

        PR remote/19998
        * remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Call
        quit_serial_event_set.

2016-06-01  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.11.1 released.

2016-05-31  Martin Galvan  <martin.galvan@tallertechnologies.com>

        PR c++/19893
        * dwarf2loc.c (coerce_pieced_ref, indirect_synthetic_pointer,
        fetch_const_value_from_synthetic_pointer): New functions.
        (indirect_pieced_value): Move lower half to indirect_synthetic_pointer.
        (pieced_value_funcs): Implement coerce_ref.
        * valops.c (value_addr): Call coerce_ref for synthetic references.
        * valprint.c (valprint_check_validity): Return true for synthetic
        references.  Also, don't show "<synthetic pointer>" if they reference
        addressable values.
        (generic_val_print_ref): Handle synthetic references.  Also move some
        code to print_ref_address.
        (print_ref_address, get_value_addr_contents): New functions.

2016-05-30  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR c++/15231
        * dwarf2read.c (enum pc_bounds_kind): Add PC_BOUNDS_INVALID.
        (process_psymtab_comp_unit_reader, read_func_scope): Adjust callers.
        (read_lexical_block_scope): Import DIEs from bare DW_TAG_lexical_block.
        (read_call_site_scope): Adjust callers.
        (dwarf2_get_pc_bounds): Implement pc_bounds_invalid.
        (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.

2016-05-30  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Code cleanup: dwarf2_get_pc_bounds: -1/0/+1 -> enum
        * dwarf2read.c (enum pc_bounds_kind) New.
        (dwarf2_get_pc_bounds): Use it in the declaration.
        (process_psymtab_comp_unit_reader): Adjust caller.  Rename has_pc_info
        to cu_bounds_kind.
        (read_func_scope, read_lexical_block_scope, read_call_site_scope):
        Adjust callers.
        (dwarf2_get_pc_bounds): Use enum pc_bounds_kind in the definition.
        (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.

2016-05-29  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * NEWS (QCatchSyscalls): Remove the parameter.  Include ...
        (QCatchSyscalls:1 in qSupported) ... this separate entry which got
        deleted.

2016-05-29  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * NEWS (N stop reply): Remove empty line.

2016-05-28  Alan Modra  <amodra@gmail.com>

        * compile/compile-object-load.c (link_callbacks_multiple_definition,
        link_callbacks_warning, link_callbacks_undefined_symbol,
        link_callbacks_undefined_symbol, link_callbacks_reloc_overflow,
        link_callbacks_reloc_dangerous,
        link_callbacks_unattached_reloc): Return void.

2016-05-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * opencl-lang.c (evaluate_subexp_opencl): If
        EVAL_AVOID_SIDE_EFFECTS mode, forward the VALUE_LVAL attribute to
        the returned value in the STRUCTOP_STRUCT case.

2016-05-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * eval.c (evaluate_subexp_standard): If EVAL_AVOID_SIDE_EFFECTS
        mode, forward the VALUE_LVAL attribute to the returned value in
        the STRUCTOP_PTR case.

2016-05-25  Tom Tromey  <tom@tromey.com>

        * python/py-value.c (value_object_as_number): Use correct spelling
        of HAVE_LIBPYTHON2_4.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * f-typeprint.c (f_type_print_base): Replace 0 by show.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * f-typeprint.c (f_type_print_base): Decrease show by one.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * f-typeprint.c (f_type_print_base): Don't print fields when show < 0.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * f-typeprint.c (f_type_print_base): Take print level into account.

2016-05-24  Tom Tromey  <tom@tromey.com>

        PR python/17386:
        * python/py-value.c (value_object_as_number): Add
        nb_inplace_floor_divide, nb_inplace_true_divide, nb_index.

2016-05-24  Tom Tromey  <tom@tromey.com>

        * python/py-value.c (value_object_as_number): Add
        nb_inplace_divide for Python 2.

2016-05-23  Tom Tromey  <tom@tromey.com>

        PR python/17981:
        * python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
        when there are no breakpoints.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (attach_proc_task_lwp_callback): Mark the lwp
        resumed, and add the thread to GDB's thread list.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (get_pending_status): If the thread reported the
        event to the core and it's pending, use the pending status signal
        number.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (lwp_lwpid_htab): New htab.
        (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
        (lwp_lwpid_htab_add_lwp): New functions.
        (lwp_list): Tweak comment.
        (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
        functions.
        (purge_lwp_list): Rewrite, using htab_traverse_noresize.
        (add_initial_lwp): Add lwp to htab too.  Use lwp_list_add.
        (delete_lwp): Use lwp_list_remove.  Remove htab too.
        (find_lwp_pid): Search in htab.
        (_initialize_linux_nat): Call lwp_lwpid_htab_create.
        * linux-nat.h (struct lwp_info) <prev>: New field.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (lwp_lwpid_htab): New htab.
        (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
        (lwp_lwpid_htab_add_lwp): New functions.
        (lwp_list): Tweak comment.
        (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
        functions.
        (purge_lwp_list): Rewrite, using htab_traverse_noresize.
        (add_initial_lwp): Add lwp to htab too.  Use lwp_list_add.
        (delete_lwp): Use lwp_list_remove.  Remove htab too.
        (find_lwp_pid): Search in htab.
        (_initialize_linux_nat): Call lwp_lwpid_htab_create.
        * linux-nat.h (struct lwp_info) <prev>: New field.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (linux_resume_one_lwp_throw): Clear the LWP's core
        field.
        (linux_nat_update_thread_list): Don't fetch the core if already
        known.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-tdep.c (find_mapping_size): Delete.
        (linux_vsyscall_range_raw): Rewrite reading from
        /proc/PID/task/PID/maps directly instead of using
        gdbarch_find_memory_regions.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (report_thread_events): New global.
        (linux_handle_extended_wait): Report
        TARGET_WAITKIND_THREAD_CREATED if thread event reporting is
        enabled.
        (wait_lwp, linux_nat_filter_event): Report all thread exits if
        thread event reporting is enabled.  Remove comment.
        (filter_exit_event): New function.
        (linux_nat_wait_1): Use it.
        (linux_nat_thread_events): New function.
        (linux_nat_add_target): Install it as target_thread_events method.

2016-05-24  Yan-Ting Lin  <currygt52@gmail.com>

        * MAINTAINERS (Write After Approval): Add "Yan-Ting Lin".

2016-05-23  Yao Qi  <yao.qi@arm.com>

        * arch-utils.c (default_code_of_frame_writable): New function.
        * arch-utils.h (default_code_of_frame_writable): Declare.
        * arm-tdep.c (arm_code_of_frame_writable): New function.
        (arm_gdbarch_init): Install gdbarch method
        code_of_frame_writable if the target is M-profile.
        * frame.c (skip_unwritable_frames): New function.
        * frame.h (skip_unwritable_frames): Declare.
        * gdbarch.sh (code_of_frame_writable): New.
        * gdbarch.c, gdbarch.h: Re-generated.
        * infcmd.c (finish_command): Call skip_unwritable_frames.

2016-05-23  Tom Tromey  <tom@tromey.com>

        PR python/19438, PR python/18393:
        * python/py-objfile.c (objfpy_initialize): Initialize self->dict.
        * python/py-progspace.c (pspy_initialize): Initialize self->dict.

2016-05-23  Gary Benson  <gbenson@redhat.com>

        * nat/gdb_thread_db.h (td_thr_validate_ftype): Remove typedef.
        * linux-thread-db.c (struct thread_db_info) <td_thr_validate_p>:
        Remove field.
        (try_thread_db_load_1): Remove td_thr_validate initialization.

2016-05-23  Jon Boden  <jon@ubuntubsd.org>  (tiny change)

        * configure.ac: Search for libutil-freebsd as alternative to libutil.
        * configure: Re-generated.

2016-05-19  Andreas Schwab  <schwab@suse.de>

        * ia64-libunwind-tdep.c (libunwind_descr): Add cast from void *.
        (libunwind_frame_set_descr): Likewise.
        (libunwind_frame_cache): Likewise.
        (libunwind_frame_dealloc_cache): Likewise.
        (libunwind_frame_sniffer): Likewise.
        (libunwind_search_unwind_table): Likewise.
        (libunwind_sigtramp_frame_sniffer): Likewise.
        (libunwind_get_reg_special): Likewise.
        (libunwind_load): Likewise.
        * ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
        (ia64_linux_store_register): Likewise.
        (ia64_linux_xfer_partial): Likewise.
        * ia64-tdep.c (ia64_access_reg): Likewise.
        (ia64_access_fpreg): Likewise.
        (ia64_access_rse_reg): Likewise.
        (ia64_access_rse_fpreg): Likewise.

2016-05-18  Tom Tromey  <tom@tromey.com>

        * rust-lang.c (rust_subscript): Initialize "high".

2016-05-17  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/20045
        * mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
        of target_is_async_p.

2016-05-17  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/18077
        * mi/mi-main.c (run_one_inferior): Use run target to determine
        whether to run async or not.
        (mi_cmd_exec_run): Likewise.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * std-operator.def (OP_RANGE): Rename from OP_F90_RANGE.
        * rust-lang.c: Don't include f-lang.h.
        (rust_range, rust_compute_range, rust_subscript)
        (rust_evaluate_subexp): Update.
        * rust-exp.y: Don't include f-lang.h.
        (ast_range, convert_ast_to_expression): Update.
        * parse.c (operator_length_standard): Update.
        * f-lang.h (enum f90_range_type): Move to expression.h.
        * f-exp.y: Use OP_RANGE.
        * expression.h (enum range_type): New enum; renamed from
        f90_range_type.
        * expprint.c: Don't include f-lang.h.
        (print_subexp_standard, dump_subexp_body_standard): Use OP_RANGE.
        * eval.c (value_f90_subarray, evaluate_subexp_standard): Update.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * NEWS: Add Rust item.

2016-05-17  Tom Tromey  <tom@tromey.com>
            Manish Goregaokar <manishsmail@gmail.com>

        * symtab.c (symbol_find_demangled_name): Handle Rust.
        * symfile.c (init_filename_language_table): Treat ".rs" as Rust.
        * std-operator.def (STRUCTOP_ANONYMOUS, OP_RUST_ARRAY): New
        constants.
        * rust-lang.h: New file.
        * rust-lang.c: New file.
        * rust-exp.y: New file.
        * dwarf2read.c (read_file_scope): Add Rust producer sniffing.
        (dwarf2_compute_name, read_func_scope, read_structure_type)
        (read_base_type, read_subrange_type, set_cu_language)
        (new_symbol_full, determine_prefix): Handle Rust.
        * defs.h (enum language) <language_rust>: New constant.
        * Makefile.in (SFILES): Add rust-exp.y, rust-lang.c.
        (COMMON_OBS): Add rust-exp.o, rust-lang.o.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * valprint.h (struct generic_val_print_array) <array_start,
        array_end>: New fields.
        * valprint.c (generic_val_print_array): Add "decorations"
        parameter.  Use "array_start", "array_end".
        (generic_val_print) <TYPE_CODE_ARRAY>: Update.
        * p-valprint.c (p_decorations): Update.
        * m2-valprint.c (m2_decorations): Update.
        * f-valprint.c (f_decorations): Update.
        * c-valprint.c (c_decorations): Update.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * NEWS: Add "maint selftest" entry.
        * selftest.h: New file.
        * selftest.c: New file.
        * maint.c: Include selftest.h.
        (maintenance_selftest): New function.
        (_initialize_maint_cmds): Add "maint selftest" command.
        * configure.ac (GDB_SELF_TEST): Maybe define.
        * config.in, configure: Rebuild.
        * Makefile.in (SFILES): Add selftest.c.
        (COMMON_OBS): Add selftest.o.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * expprint.c: Include f-lang.h.
        (print_subexp_standard, dump_subexp_body_standard): Handle
        OP_F90_RANGE.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * Makefile.in (init.c): Search .y files for initialization
        functions.

2016-05-12  Doug Evans  <dje@google.com>

        PR symtab/19999
        * dwarf2loc.c (dwarf2_find_location_expression): For DWO files still
        add base_offset.

2016-05-10  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

        * iq2000-tdep.c (iq2000_scan_prologue): Remove if that shouldn't guard
        anything.
        * linespec.c (add_sal_to_sals): Restore call to symtab_to_fullname.

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

        * arm-tdep.c (arm_elf_make_msymbol_special): Use
        ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.

2016-05-07  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

        * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused
        variables.
        * aarch64-tdep.c (aarch64_skip_prologue): Likewise.
        (aarch64_scan_prologue): Likewise.
        (aarch64_prologue_prev_register): Likewise.
        (aarch64_dwarf2_prev_register): Likewise.
        (pass_in_v): Likewise.
        (aarch64_push_dummy_call): Likewise.
        (aarch64_breakpoint_from_pc): Likewise.
        (aarch64_return_in_memory): Likewise.
        (aarch64_return_value): Likewise.
        (aarch64_displaced_step_b_cond): Likewise.
        (aarch64_displaced_step_cb): Likewise.
        (aarch64_displaced_step_tb): Likewise.
        (aarch64_gdbarch_init): Likewise.
        (aarch64_process_record): Likewise.
        * alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise.
        * alpha-tdep.c (_initialize_alpha_tdep): Likewise.
        * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise.
        * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise.
        * amd64-tdep.c (fixup_riprel): Likewise.
        * amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise.
        (amd64_windows_frame_decode_insns): Likewise.
        (amd64_windows_frame_cache): Likewise.
        (amd64_windows_frame_prev_register): Likewise.
        (amd64_windows_frame_this_id): Likewise.
        (amd64_windows_init_abi): Likewise.
        * arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise.
        (arm_linux_get_next_pcs_syscall_next_pc): Likewise.
        * arm-symbian-tdep.c (arm_symbian_init_abi): Likewise.
        * arm-tdep.c (arm_make_epilogue_frame_cache): Likewise.
        (arm_epilogue_frame_prev_register): Likewise.
        (arm_record_vdata_transfer_insn): Likewise.
        (arm_record_exreg_ld_st_insn): Likewise.
        * auto-load.c (execute_script_contents): Likewise.
        (print_scripts): Likewise.
        * avr-tdep.c (avr_frame_prev_register): Likewise.
        (avr_push_dummy_call): Likewise.
        * bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise.
        * bfin-tdep.c (bfin_gdbarch_init): Likewise.
        * blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise.
        * break-catch-throw.c (fetch_probe_arguments): Likewise.
        * breakpoint.c (breakpoint_xfer_memory): Likewise.
        (breakpoint_init_inferior): Likewise.
        (breakpoint_inserted_here_p): Likewise.
        (software_breakpoint_inserted_here_p): Likewise.
        (hardware_breakpoint_inserted_here_p): Likewise.
        (bpstat_what): Likewise.
        (break_range_command): Likewise.
        (save_breakpoints): Likewise.
        * coffread.c (coff_symfile_read): Likewise.
        * cris-tdep.c (cris_push_dummy_call): Likewise.
        (cris_scan_prologue): Likewise.
        (cris_register_size): Likewise.
        (_initialize_cris_tdep): Likewise.
        * d-exp.y: Likewise.
        * dbxread.c (dbx_read_symtab): Likewise.
        (process_one_symbol): Likewise.
        (coffstab_build_psymtabs): Likewise.
        (elfstab_build_psymtabs): Likewise.
        * dicos-tdep.c (dicos_init_abi): Likewise.
        * disasm.c (do_mixed_source_and_assembly): Likewise.
        (gdb_disassembly): Likewise.
        * dtrace-probe.c (dtrace_process_dof): Likewise.
        * dwarf2read.c (error_check_comp_unit_head): Likewise.
        (build_type_psymtabs_1): Likewise.
        (skip_one_die): Likewise.
        (process_imported_unit_die): Likewise.
        (dwarf2_physname): Likewise.
        (read_file_scope): Likewise.
        (setup_type_unit_groups): Likewise.
        (create_dwo_cu_reader): Likewise.
        (create_dwo_cu): Likewise.
        (create_dwo_unit_in_dwp_v1): Likewise.
        (create_dwo_unit_in_dwp_v2): Likewise.
        (lookup_dwo_unit_in_dwp): Likewise.
        (free_dwo_file): Likewise.
        (check_producer): Likewise.
        (dwarf2_add_typedef): Likewise.
        (dwarf2_add_member_fn): Likewise.
        (read_unsigned_leb128): Likewise.
        (read_signed_leb128): Likewise.
        (dwarf2_const_value): Likewise.
        (follow_die_sig_1): Likewise.
        (dwarf_decode_macro_bytes): Likewise.
        * extension.c (restore_active_ext_lang): Likewise.
        * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
        * ft32-tdep.c (ft32_analyze_prologue): Likewise.
        * gdbtypes.c (lookup_typename): Likewise.
        (resolve_dynamic_range): Likewise.
        (check_typedef): Likewise.
        * h8300-tdep.c (h8300_is_argument_spill): Likewise.
        (h8300_gdbarch_init): Likewise.
        * hppa-tdep.c (hppa32_push_dummy_call): Likewise.
        (hppa_frame_this_id): Likewise.
        (_initialize_hppa_tdep): Likewise.
        * hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise.
        * hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise.
        * i386-dicos-tdep.c (i386_dicos_init_abi): Likewise.
        * i386-tdep.c (i386_bnd_type): Likewise.
        (i386_gdbarch_init): Likewise.
        (i386_mpx_bd_base): Likewise.
        * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise.
        * i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise.
        * ia64-tdep.c (examine_prologue): Likewise.
        (ia64_frame_cache): Likewise.
        (ia64_push_dummy_call): Likewise.
        * infcmd.c (finish_command_fsm_async_reply_reason): Likewise.
        (default_print_one_register_info): Likewise.
        * infrun.c (infrun_thread_ptid_changed): Likewise.
        (thread_still_needs_step_over): Likewise.
        (stop_all_threads): Likewise.
        (restart_threads): Likewise.
        (keep_going_stepped_thread): Likewise.
        * iq2000-tdep.c (iq2000_scan_prologue): Likewise.
        * language.c (language_init_primitive_type_symbols): Likewise.
        * linespec.c (add_sal_to_sals): Likewise.
        * linux-nat.c (status_callback): Likewise.
        (kill_unfollowed_fork_children): Likewise.
        (linux_nat_kill): Likewise.
        * linux-tdep.c (linux_fill_prpsinfo): Likewise.
        * linux-thread-db.c (thread_db_notice_clone): Likewise.
        (record_thread): Likewise.
        * location.c (string_to_event_location_basic): Likewise.
        * m32c-tdep.c (m32c_prev_register): Likewise.
        * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
        * m32r-tdep.c (decode_prologue): Likewise.
        * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
        * machoread.c (macho_symtab_read): Likewise.
        (macho_symfile_read): Likewise.
        (macho_symfile_offsets): Likewise.
        * maint.c (set_per_command_cmd): Likewise.
        * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
        (mi_cmd_stack_list_variables): Likewise.
        * mi/mi-main.c (mi_cmd_exec_run): Likewise.
        (output_register): Likewise.
        (mi_cmd_execute): Likewise.
        (mi_cmd_trace_define_variable): Likewise.
        (print_variable_or_computed): Likewise.
        * minsyms.c (prim_record_minimal_symbol_full): Likewise.
        * mn10300-tdep.c (mn10300_frame_prev_register): Likewise.
        * msp430-tdep.c (msp430_pseudo_register_write): Likewise.
        * mt-tdep.c (mt_registers_info): Likewise.
        * nios2-tdep.c (nios2_analyze_prologue): Likewise.
        (nios2_push_dummy_call): Likewise.
        (nios2_frame_unwind_cache): Likewise.
        (nios2_stub_frame_cache): Likewise.
        (nios2_stub_frame_sniffer): Likewise.
        (nios2_gdbarch_init): Likewise.
        * ppc-ravenscar-thread.c: Likewise.
        * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
        * python/py-evts.c (add_new_registry): Likewise.
        * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
        (bpfinishpy_detect_out_scope_cb): Likewise.
        * python/py-framefilter.c (py_print_value): Likewise.
        * python/py-inferior.c (infpy_write_memory): Likewise.
        * python/py-infevents.c (create_inferior_call_event_object): Likewise.
        * python/py-infthread.c (thpy_get_ptid): Likewise.
        * python/py-linetable.c (ltpy_get_pcs_for_line): Likewise.
        (ltpy_get_all_source_lines): Likewise.
        (ltpy_is_valid): Likewise.
        (ltpy_iternext): Likewise.
        * python/py-symtab.c (symtab_and_line_to_sal_object): Likewise.
        * python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise.
        (unwind_infopy_str): Likewise.
        * python/py-varobj.c (py_varobj_get_iterator): Likewise.
        * ravenscar-thread.c (ravenscar_inferior_created): Likewise.
        * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
        * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
        * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
        * s390-linux-tdep.c (s390_supply_tdb_regset): Likewise.
        (s390_frame_prev_register): Likewise.
        (s390_dwarf2_frame_init_reg): Likewise.
        (s390_record_vr): Likewise.
        (s390_process_record): Likewise.
        * score-tdep.c (score_push_dummy_call): Likewise.
        (score3_analyze_prologue): Likewise.
        * sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
        * sh64-tdep.c (sh64_analyze_prologue): Likewise.
        (sh64_push_dummy_call): Likewise.
        (sh64_extract_return_value): Likewise.
        (sh64_do_fp_register): Likewise.
        * solib-aix.c (solib_aix_get_section_offsets): Likewise.
        * solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise.
        (darwin_solib_read_all_image_info_addr): Likewise.
        * solib-dsbt.c (enable_break): Likewise.
        * solib-frv.c (enable_break2): Likewise.
        (frv_fdpic_find_canonical_descriptor): Likewise.
        * solib-svr4.c (svr4_handle_solib_event): Likewise.
        * sparc-tdep.c (sparc_skip_stack_check): Likewise.
        * sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise.
        * sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise.
        * spu-tdep.c (info_spu_dma_cmdlist): Likewise.
        * stack.c (read_frame_local): Likewise.
        * symfile.c (symbol_file_add_separate): Likewise.
        (remove_symbol_file_command): Likewise.
        * symmisc.c (maintenance_print_one_line_table): Likewise.
        * symtab.c (symbol_cache_flush): Likewise.
        (basic_lookup_transparent_type): Likewise.
        (sort_search_symbols_remove_dups): Likewise.
        * target.c (target_memory_map): Likewise.
        (target_detach): Likewise.
        (target_resume): Likewise.
        (acquire_fileio_fd): Likewise.
        (target_store_registers): Likewise.
        * thread.c (print_thread_info_1): Likewise.
        * tic6x-tdep.c (tic6x_analyze_prologue): Likewise.
        * tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise.
        * tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
        (tilegx_analyze_prologue): Likewise.
        (tilegx_stack_frame_destroyed_p): Likewise.
        (tilegx_frame_cache): Likewise.
        * tracefile.c (trace_save): Likewise.
        * tracepoint.c (encode_actions_and_make_cleanup): Likewise.
        (start_tracing): Likewise.
        (print_one_static_tracepoint_marker): Likewise.
        * tui/tui.c (tui_enable): Likewise.
        * valops.c (value_struct_elt_bitpos): Likewise.
        (find_overload_match): Likewise.
        (find_oload_champ): Likewise.
        * value.c (value_contents_copy_raw): Likewise.
        * windows-tdep.c (windows_get_tlb_type): Likewise.
        * x86-linux-nat.c (x86_linux_enable_btrace): Likewise.
        * xcoffread.c (record_minimal_symbol): Likewise.
        (scan_xcoff_symtab): Likewise.
        * xtensa-tdep.c (execute_code): Likewise.
        (xtensa_gdbarch_init): Likewise.
        (_initialize_xtensa_tdep): Likewise.

2016-05-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-linux-nat.c (spu_bfd_iovec_pread): Add pointer cast for C++.
        (spu_bfd_open): Likewise.

2016-05-04  Yao Qi  <yao.qi@linaro.org>

        PR gdb/19947
        * corefile.c (read_memory): Rename it to ...
        (read_memory_object): ... it.  Add parameter object.
        (read_memory): Call read_memory_object.
        (read_stack): Likewise.
        (read_code): Likewise.

2016-05-03  Yunlian Jiang <yunlian@google.com>
            Doug Evans  <dje@google.com>

        PR symtab/19914
        * dwarf2read.c (open_and_init_dwp_file): Look at backlink if objfile
        is separate debug file.

2016-05-03  Don Breazeal <donb@codesourcery.com>

        * serial.h (gdb_pipe): Fix argument names in comment.

2016-05-03  Pedro Alves <palves@redhat.com>

        PR python/20037
        * python/python.c (_initialize_python) [IS_PY3K]: xstrdup/xfree
        oldloc.

2016-05-03  Pedro Alves <palves@redhat.com>

        * python/python.c (_initialize_python) [IS_PY3K]: Remove dead
        code.

2016-05-03  Pedro Alves  <palves@redhat.com>

        * configure.ac (PYTHON_LIBS): Sed away "-Xlinker -export-dynamic".
        * configure: Regenerate.

2016-05-03  Pedro Alves  <palves@redhat.com>

        * configure.ac (checking for the dynamic export flag): Add
        $PYTHON_CPPFLAGS to CPPFLAGS.
        * configure: Regenerate.

2016-05-03  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

        * symfile.c (find_pc_overlay): Add braces to avoid -Wparentheses
        warning.
        (find_pc_mapped_section): Likewise.
        (list_overlays_command): Likewise.

2016-05-02  Eli Zaretskii  <eliz@gnu.org>

        * windows-nat.c (_initialize_check_for_gdb_ini): Fix off-by-one
        error in allocation of space for "$HOME/.gdbinit" string.  This
        caused GDB to abort on startup whenever a '~/gdb.ini' file was
        actually found, because xsnprintf would hit an assertion
        violation.

2016-04-28  Simon Marchi  <simon.marchi@ericsson.com>

        * cli/cli-decode.c (help_cmd_list): Do not list commands that
        are deprecated.

2016-04-27  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * remote.c (remote_start_remote): Detect PACKET_vFile_setfs.support.

2016-04-27  Martin Galvan  <martin.galvan@tallertechnologies.com>

        * c-valprint.c (c_value_print): Always convert val back to reference
        type if we converted it to a pointer type.

2016-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * configure.ac: Enhance configure check for babeltrace to reject
        non-C++-enabled versions.
        * configure: Regenerate.

2016-04-26  Sanimir Agovic  <sanimir.agovic@intel.com>
            Keven Boell  <keven.boell@intel.com>
            Bernhard Heckel  <bernhard.heckel@intel.com>

        * f-valprint.c (f77_create_arrayprint_offset_tbl): Remove
        function.
        (F77_DIM_SIZE, F77_DIM_OFFSET): Remove macro.
        (f77_print_array_1): Use value_subscript to subscript a
        value array.
        (f77_print_array): Remove call to f77_create_arrayprint_offset_tbl.
        (f_val_print): Use value_field to construct a field value.

2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>

        * valarith.c (value_address): Resolve dynamic types.

2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>
            Keven Boell  <kevel.boell@intel.com>

        * NEWS: Add new supported features for fortran.
        * gdbtypes.c (remove_dyn_prop): New.
        (resolve_dynamic_struct): Keep type length for fortran structs.
        * gdbtypes.h: Forward declaration of new function.
        * value.c (value_address): Return dynamic resolved location of a value.
        (set_value_component_location): Adjust the value address
        for single value prints.
        (value_primitive_field): Support value types with a dynamic location.
        (set_internalvar): Remove dynamic location property of
        internal variables.

2016-04-25  Pedro Alves  <palves@redhat.com>
            Yao Qi  <yao.qi@linaro.org>

        * mem-break.c (set_raw_breakpoint_at): Create a raw breakpoint
        object.  Insert it if it is not inserted yet.  Increase the
        refcount and link it into the proc's raw breakpoint list.

2016-04-25  Yao Qi  <yao.qi@linaro.org>

        * breakpoint.c (should_be_inserted): Return 0 if the location's
        owner is not single step breakpoint or single step breakpoint's
        thread isn't the thread which is stepping past a breakpoint.
        * gdbarch.sh (software_single_step): Update comments.
        * gdbarch.h: Regenerated.
        * infrun.c (struct step_over_info) <thread>: New field.
        (set_step_over_info): New argument 'thread'.  Callers updated.
        (clear_step_over_info): Set field thread to -1.
        (thread_is_stepping_over_breakpoint): New function.
        * infrun.h (thread_is_stepping_over_breakpoint): Declaration.

2016-04-22  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * ppc-linux-nat.c (ppc_linux_read_description): Use PPC_FEATURE_HAS_VSX
        and PPC_FEATURE_HAS_ALTIVEC to check if such features are available.

2016-04-22  Yao Qi  <yao.qi@linaro.org>

        * valops.c (read_value_memory): New local variable 'stack'.
        Set it to either TARGET_OBJECT_STACK_MEMORY or
        TARGET_OBJECT_MEMORY.

2016-04-22  Pedro Alves  <palves@redhat.com>

        * ada-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * ada-lang.c (ada_language_defn): Adjust.
        * ada-lang.h (ada_error): Rename to ...
        (ada_yyerror): ... this.
        * c-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * c-lang.c (c_language_defn, cplus_language_defn)
        (asm_language_defn, minimal_language_defn): Adjust.
        * c-lang.h (c_error): Rename to ...
        (c_yyerror): ... this.
        * d-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * d-lang.c (d_language_defn): Adjust.
        * d-lang.h (d_error): Rename to ...
        (d_yyerror): ... this.
        * f-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * f-lang.c (f_language_defn): Adjust.
        * f-lang.h (f_error): Rename to ...
        (f_yyerror): ... this.
        * go-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * go-lang.c (go_language_defn): Adjust.
        * go-lang.h (go_error): Rename to ...
        (go_yyerror): ... this.
        * jv-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * jv-lang.c (java_language_defn): Adjust.
        * jv-lang.h (java_error): Rename to ...
        (java_yyerror): ... this.
        * m2-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * m2-lang.c (m2_language_defn): Adjust.
        * m2-lang.h (m2_error): Rename to ...
        (m2_yyerror): ... this.
        * objc-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * objc-lang.c (objc_language_defn): Adjust.
        * opencl-lang.c (opencl_language_defn): Adjust.
        * p-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * p-lang.c (pascal_language_defn): Adjust.
        * p-lang.h (pascal_error): Rename to ...
        (pascal_yyerror): ... this.
        * yy-remap.h: New file.

2016-04-22  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.h (GDB_XCPT_TRY): Remove mention of
        the foreign frames issue.
        [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.

2016-04-22  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.c (enum catcher_state, struct catcher)
        (current_catcher): Define in C++ mode too.
        (exceptions_state_mc_catch): Call throw_exception_sjlj instead of
        throw_exception.
        (throw_exception_sjlj, throw_exception_cxx): New functions,
        factored out from throw_exception.
        (throw_exception): Reimplement.
        * common/common-exceptions.h (exceptions_state_mc_init)
        (exceptions_state_mc_action_iter)
        (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
        Declare in C++ mode too.
        (TRY): Rename to ...
        (TRY_SJLJ): ... this.
        (CATCH): Rename to ...
        (CATCH_SJLJ): ... this.
        (END_CATCH): Rename to ...
        (END_CATCH_SJLJ): ... this.
        [GDB_XCPT == GDB_XCPT_SJMP] (TRY, CATCH, END_CATCH): Map to SJLJ
        equivalents.
        (throw_exception): Update comments.
        (throw_exception_sjlj): Declare.
        * event-top.c (gdb_rl_callback_read_char_wrapper): Extend intro
        comment.  Wrap body in TRY_SJLJ/CATCH_SJLJ and rethrow any
        intercepted exception.
        (gdb_rl_callback_handler): New function.
        (gdb_rl_callback_handler_install): Always install
        gdb_rl_callback_handler as readline callback.

2016-04-22  Pedro Alves  <palves@redhat.com>

        * event-top.c (rl_callback_read_char_wrapper): Rename to ...
        (gdb_rl_callback_read_char_wrapper): ... this.
        (change_line_handler, gdb_setup_readline): Adjust.

2016-04-22  Yao Qi  <yao.qi@linaro.org>

        * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Clear CPSR
        bits 20 to 23.

2016-04-22  Joel Brobecker  <brobecker@adacore.com>

        * MAINTAINER: Remove myself as AIX Maintainer.

2016-04-22  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (mips_gdbarch_init): For GDB_OSABI_LINUX set
        `num_regs' to 90 rather than 79.  Where a target description is
        present adjust the setting appropriately.

2016-04-21  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.h (GDB_XCPT_TRY): Add comment.
        (GDB_XCPT): Always define as GDB_XCPT_SJMP.

2016-04-21  Pedro Alves  <palves@redhat.com>

        * aix-thread.c (pdc_read_data, pdc_write_data): Add cast.
        (aix_thread_resume): Use PTRACE_TYPE_ARG5.
        * rs6000-nat.c (rs6000_ptrace64): Use PTRACE_TYPE_ARG5.
        (rs6000_ptrace_ldinfo): Change type of 'ldi' local to void
        pointer, and cast return to gdb_byte pointer.

2016-04-21  Pedro Alves  <palves@redhat.com>

        * s390-linux-nat.c (fetch_regset, store_regset, check_regset): Use
        void * instead of gdb_byte *.

2016-04-21  Pedro Alves  <palves@redhat.com>

        * dwarf2read.c (try_open_dwop_file, open_dwo_file)
        (file_file_name, file_full_name): Add char * cast to sentinel in
        concat/reconcat calls.
        * event-top.c (top_level_prompt): Likewise.
        * guile/guile.c (initialize_scheme_side): Likewise.
        * linux-tdep.c (linux_fill_prpsinfo): Likewise.
        * macrotab.c (macro_source_fullname): Likewise.
        * main.c (get_init_files, captured_main): Likewise.
        * psymtab.c (psymtab_to_fullname): Likewise.
        * python/python.c (_initialize_python)
        (gdbpy_finish_initialization): Likewise.
        * source.c (symtab_to_fullname): Likewise.

2016-04-20  Pedro Alves  <palves@redhat.com>

        * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Default to yes.
        * configure: Renegerate.

2016-04-20  Pedro Alves  <palves@redhat.com>

        * darwin-nat.c (darwin_decode_message): Use gdb_signal_from_host.

2016-04-20  Pedro Alves  <palves@redhat.com>

        * aarch64-tdep.c (aarch64_record_load_store): Change type of
        'reg_rm_val' local to ULONGEST.

2016-04-20  Pedro Alves  <palves@redhat.com>

        * darwin-nat.c (darwin_resume_thread): Add uintptr_t cast.

2016-04-20  Doug Evans  <xdje42@gmail.com>

        * symmisc.c (dump_symtab_1): Print owning compunit for identical
        blockvectors.

2016-04-20  Yao Qi  <yao.qi@linaro.org>

        * aarch32-linux-nat.c: Include "arch/arm-linux.h".

2016-04-20  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.h (ARM_CPSR_GREGNUM): Move it to ...
        * arch/arm-linux.h: ... here.

2016-04-19  John Baldwin  <jhb@FreeBSD.org>

        * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Change xstateregs
        to void *.
        (amd64bsd_store_inferior_registers): Likewise.
        * fbsd-nat.c (resume_one_thread_cb): Explicitly cast data to ptid_t *.
        (resume_all_threads_cb): Likewise.
        * i386bsd-nat.c (i386bsd_supply_gregset): Cast gregs to char *.
        (i386bsd_collect_gregset): Likewise.
        (i386bsd_fetch_inferior_registers): Change xstateregs to void *.
        (i386bsd_store_inferior_registers): Likewise.

2016-04-19  John Baldwin  <jhb@FreeBSD.org>

        * main.c (setup_alternate_signal_stack): Cast to char *.

2016-04-19  Doug Evans  <xdje42@gmail.com>

        * symmisc.c (dump_symtab_1, dump_symtab): Delete arg objfile.
        All callers updated.

2016-04-19  Doug Evans  <xdje42@gmail.com>

        PR gdb/17911
        * source.c (is_regular_file): New arg errno_ptr.
        All callers updated.

2016-04-19  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * linux-record.c (record_linux_system_call): Merge handling for
        readlink/recv/read and pipe/pipe2.

2016-04-14  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * features/i386/amd64-mpx-linux.xml: Remove AVX feature.
        * features/i386/amd64-mpx.xml: Remove AVX feature.
        * features/i386/i386-mpx-linux.xml: Remove AVX feature.
        * features/i386/i386-mpx.xml: Remove AVX feature.
        * features/i386/amd64-mpx-linux.c: Regenerate.
        * features/i386/amd64-mpx.c: Regenerate.
        * features/i386/i386-mpx-linux.c: Regenerate.
        * features/i386/i386-mpx.c: Regenerate.
        * regformats/i386/amd64-mpx-linux.dat: Regenerate.
        * regformats/i386/amd64-mpx.dat: Regenerate.
        * regformats/i386/i386-mpx-linux.dat: Regenerate.
        * regformats/i386/i386-mpx.dat: Regenerate.

2016-04-16  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
        New include.
        (amd64_linux_core_read_description): Add case for
         X86_XSTATE_AVX_MPX_MASK.
        (_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
        * amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
        * amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
        (amd64_target_description): Add case for  X86_XSTATE_AVX_MPX_MASK.
        (_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
        * common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
        (X86_XSTATE_AVX_MPX_MASK): New case.
        * features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
        (i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
        (i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
        (i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
        New expedites.
        * i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
        include.
        (i386_linux_core_read_description): Add case
        X86_XSTATE_AVX_MPX_MASK.
        (_initialize_i386_linux_tdep): Call
        initialize_tdesc_i386_avx_mpx_linux.
        * i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
        * i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
        (i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
        * x86-linux-nat.c (x86_linux_read_description): Add case for
        X86_XSTATE_AVX_MPX_MASK.
        * features/i386/amd64-avx-mpx-linux.xml: New file.
        * features/i386/i386-avx-mpx-linux.xml: New file.
        * features/i386/i386-avx-mpx.xml: New file.
        * features/i386/amd64-avx-mpx.xml: New file.
        * features/i386/amd64-avx-mpx-linux.c: Generated.
        * features/i386/amd64-avx-mpx.c: Generated.
        * features/i386/i386-avx-mpx-linux.c: Generated.
        * features/i386/i386-avx-mpx.c: Generated.
        * regformats/i386/amd64-avx-mpx-linux.dat: Generated.
        * regformats/i386/amd64-avx-mpx.dat: Generated.
        * regformats/i386/i386-avx-mpx-linux.dat: Generated.
        * regformats/i386/i386-avx-mpx.dat: Generated.

2016-04-18  Pedro Alves  <palves@redhat.com>

        * ptrace.m4 (GDB_AC_PTRACE): Don't run tests in C++ mode.
        * configure: Regenerate.

2016-04-18  Martin Galvan  <martin.galvan@tallertechnologies.com>

        * valops.c (value_addr): For C++ references, set the copied value's
        enclosing_type as well.

2016-04-18  Yao Qi  <yao.qi@linaro.org>

        Revert:
        2016-04-15  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
        PC is far from the end of function.

2016-04-16  Pedro Alves  <palves@redhat.com>

        * ada-exp.y (yydefred): Define as ada_yydefred.

2016-04-15  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (ada_lookup_struct_elt_type): Constify 'type_str' and
        'name_str' locals.

2016-04-15  Pedro Alves  <palves@redhat.com>

        * btrace.c (pt_btrace_insn_flags): Change return type to
        btrace_insn_flags.  Use btrace_insn_flags for local.

2016-04-15  Pedro Alves  <palves@redhat.com>

        * nat/linux-ptrace.h [__mips__] (GDB_ARCH_IS_TRAP_BRKPT): Also
        accept TRAP_BRKPT.
         [__mips__] (GDB_ARCH_IS_TRAP_HWBKPT): Also accept TRAP_HWBKPT.

2016-04-15  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
        PC is far from the end of function.

2016-04-14  Pedro Alves  <palves@redhat.com>

        * cli/cli-cmds.c (alias_usage_error): New function.
        (alias_command): Use it.
        * ctf.c (ctf_save_metadata_header): Inline metadata_fmt local in
        ctf_save_write_metadata call.

2016-04-14  Pedro Alves  <palves@redhat.com>

        * ada-typeprint.c (print_fixed_point_type): Don't pass float as
        argument to function expecting LONGEST.
        * value.c (unpack_long): Add casts to LONGEST.

2016-04-13  Luis Machado  <lgustavo@codesourcery.com>

        * exec.c (exec_file_locate_attach): Guard a couple functions
        that can throw errors.
        (exception_print_same): New helper function.

2016-04-13  Pedro Alves  <palves@redhat.com>

        PR remote/19840
        * remote.c (struct remote_state) <last_resume_exec_dir>: New
        field.
        (new_remote_state): Default last_resume_exec_dir to EXEC_FORWARD.
        (remote_open_1): Reset last_resume_exec_dir to EXEC_FORWARD.
        (remote_resume): Store the last execution direction.
        (remote_execution_direction): New function.
        (init_remote_ops): Install it as to_execution_direction target_ops
        method.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.h (GDB_XCPT_TRY): Update comment.
        [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.c (struct catcher) <buf>: Now a
        'jmp_buf' instead of SIGJMP_BUF.
        (exceptions_state_mc_init): Change return type to 'jmp_buf'.
        (throw_exception): Use longjmp instead of SIGLONGJMP.
        * common/common-exceptions.h: Include <setjmp.h> instead of
        "gdb_setjmp.h".
        (exceptions_state_mc_init): Change return type to 'jmp_buf'.
        [GDB_XCPT == GDB_XCPT_SJMP] (TRY): Use setjmp instead of
        SIGSETJMP.
        * cp-support.c: Include "gdb_setjmp.h".

2016-04-12  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.c (exception_rethrow): Remove
        prepare_to_throw_exception call.
        * common/common-exceptions.h (prepare_to_throw_exception): Delete
        declaration.
        * exceptions.c (prepare_to_throw_exception): Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * target.c (target_check_pending_interrupt): Delete.
        * target.h (struct target_ops) <to_check_pending_interrupt>:
        Remove method.
        (target_check_pending_interrupt): Remove declaration.
        * target-delegates.c: Regenerate.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * defs.h: Update comments on SIGINT handling.
        (immediate_quit): Delete declaration.
        * event-loop.c (call_async_signal_handler): Delete.
        * event-loop.h (call_async_signal_handler): Delete declaration.
        (mark_async_signal_handler): Update comments.
        (gdb_call_async_signal_handler): Delete declaration.
        * event-top.c (handle_sigint): Call mark_async_signal_handler
        instead of gdb_call_async_signal_handler.
        * exceptions.c (prepare_to_throw_exception): Remove reference to
        immediate_quit.
        (exception_fprintf): Remove comments about immediate_quit.
        * mingw-hdep.c (sigint_event, sigint_handler): Delete.
        (gdb_select): Don't wait on sigint_event.
        (gdb_call_async_signal_handler): Delete.
        (_initialize_mingw_hdep): Delete.
        * posix-hdep.c (gdb_call_async_signal_handler): Delete.
        * utils.c (immediate_quit): Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * defs.h (quit_handler_ftype, quit_handler)
        (make_cleanup_override_quit_handler, default_quit_handler): New.
        (QUIT): Adjust comments.
        * event-top.c (default_quit_handler): New function.
        (quit_handler): New global.
        (struct quit_handler_cleanup_data): New.
        (restore_quit_handler, restore_quit_handler_dtor)
        (make_cleanup_override_quit_handler): New.
        (async_request_quit): Call QUIT.
        * remote.c (struct remote_state) <got_ctrlc_during_io>: New field.
        (async_sigint_remote_twice_token, async_sigint_remote_token):
        Delete.
        (remote_close): Update comments.
        (remote_start_remote): Don't set immediate_quit.  Set starting_up
        earlier.
        (remote_serial_quit_handler, remote_unpush_and_throw): New
        functions.
        (remote_open_1): Clear got_ctrlc_during_io.  Set
        remote_async_terminal_ours_p unconditionally.
        (async_initialize_sigint_signal_handler)
        (async_handle_remote_sigint, async_handle_remote_sigint_twice)
        (remote_check_pending_interrupt, async_remote_interrupt)
        (async_remote_interrupt_twice)
        (async_cleanup_sigint_signal_handler, ofunc)
        (sync_remote_interrupt, sync_remote_interrupt_twice): Delete.
        (remote_terminal_inferior, remote_terminal_ours): Remove async
        checks.
        (remote_wait_as): Don't install a SIGINT handler in sync mode.
        (readchar, remote_serial_write): Override the quit handler with
        remote_serial_quit_handler.
        (getpkt_or_notif_sane_1): Don't call QUIT.
        (initialize_remote_ops): Don't install
        remote_check_pending_interrupt.
        (_initialize_remote): Don't create async_sigint_remote_token and
        async_sigint_remote_twice_token.
        * ser-base.c (ser_base_wait_for): Call QUIT and use
        interruptible_select.
        (ser_base_write): Call QUIT.
        * ser-go32.c (dos_readchar, dos_write): Call QUIT.
        * ser-unix.c (wait_for): Don't use VTIME.  Always take the
        gdb_select path, but call QUIT and interruptible_select.
        * utils.c (maybe_quit): Call the current quit handler.  Don't call
        target_check_pending_interrupt.
        (defaulted_query, prompt_for_continue): Override the quit handler
        with the default quit handler.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * tui/tui-hooks.c (tui_target_has_run): Delete.
        (tui_about_to_proceed): Delete.
        (tui_about_to_proceed_observer): Delete.
        (tui_install_hooks, tui_remove_hooks): Don't install/remove an
        about_to_proceed observer.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * mi/mi-interp.c (mi_new_thread): Put
        target_terminal_ours_for_output in effect while outputting.
        (mi_thread_exit): Use target_terminal_ours_for_output instead of
        target_terminal_ours.
        (mi_record_changed, mi_inferior_added, mi_inferior_appeared)
        (mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed)
        (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
        (mi_breakpoint_created, mi_breakpoint_deleted)
        (mi_breakpoint_modified, mi_solib_loaded, mi_solib_unloaded)
        (mi_command_param_changed, mi_memory_changed)
        (report_initial_inferior): Use target_terminal_ours_for_output
        instead of target_terminal_ours.  Restore terminal settings.
        * mi/mi-main.c (mi_execute_command): Use
        target_terminal_ours_for_output instead of target_terminal_ours.
        Restore terminal settings.

2016-04-12  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * gnu-nat.c (inf_validate_task_sc): Don't call
        target_terminal_ours / target_terminal_inferior around query.
        * i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
        call target_terminal_ours / target_terminal_inferior around
        yquery.
        * linux-record.c (record_linux_system_call): Don't call
        target_terminal_ours / target_terminal_inferior around yquery.
        * nto-procfs.c (interrupt_query): Don't call target_terminal_ours
        / target_terminal_inferior around query.
        * record-full.c (record_full_check_insn_num): Remove
        'set_terminal' parameter.  Don't call target_terminal_ours /
        target_terminal_inferior around query.
        (record_full_message, record_full_registers_change)
        (record_full_xfer_partial): Adjust.
        * remote.c (interrupt_query): Don't call target_terminal_ours /
        target_terminal_inferior around query.
        * utils.c (defaulted_query): Install cleanup to restore target
        terminal.  Put target_terminal_ours_for_output in effect while
        defaulted producing, and target_terminal_ours in in effect while
        handling input.
        (prompt_for_continue): Install cleanup to restore target terminal.
        Put target_terminal_ours in in effect while handling input.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * utils.c (defaulted_query, prompt_for_continue): Free temporary
        strings with cleanups, instead of xfree.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * utils.c (vwarning, internal_vproblem): Use
        make_cleanup_restore_target_terminal and
        target_terminal_ours_for_output.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * infcmd.c (post_create_inferior, prepare_one_step): Use
        target_terminal_ours_for_output instead of target_terminal_ours.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * exceptions.c (print_flush): Use target_terminal_ours_for_output
        instead of target_terminal_ours, and restore target terminal with
        a cleanup.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * cp-support.c (gdb_demangle): Use target_terminal_ours_for_output
        instead of target_terminal_ours, and restore target terminal with
        a cleanup.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (type_as_string, type_as_string_and_cleanup): New
        functions.
        (ada_lookup_struct_elt_type): Use type_as_string_and_cleanup.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * ser-base.c (fd_event): Retry read_prim on EINTR.
        (do_ser_base_readchar): Retry read_prim on EINTR.
        (ser_base_write): Retry write_prim on EINTR.
        * ser-unix.c (ser_unix_read_prim): Don't retry on EINTR here.
        (ser_unix_write_prim): Remove comment.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * remote.c (remote_pass_ctrlc): New function.
        (init_remote_ops): Install it.
        * target.c (target_terminal_inferior): Pass pending Ctrl-C to the
        target.
        (target_pass_ctrlc, default_target_pass_ctrlc): New functions.
        * target.h (struct target_ops) <to_pass_ctrlc>: New method.
        (target_pass_ctrlc, default_target_pass_ctrlc): New declarations.
        * target-delegates.c: Regenerate.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * infcmd.c (interrupt_target_1): Call target_stop is in non-stop
        mode.
        * linux-nat.c (linux_nat_interrupt): Delete.
        (linux_nat_add_target): Don't install linux_nat_interrupt.
        * remote.c (remote_interrupt_ns): Change return type to void.
        Throw error if interrupting the target is not supported.
        (remote_interrupt): Don't call the remote_stop_ns/remote_stop_as.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * defs.h (clear_quit_flag): Remove declaration.
        * extension-priv.h (struct extension_language_ops)
        <clear_quit_flag>: Remove field and update comments.
        * extension.c (clear_quit_flag): Delete.
        * guile/guile.c (guile_extension_ops): Adjust.
        * python/python.c (python_extension_ops): Adjust.
        (gdbpy_clear_quit_flag): Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * main.c (captured_main): Don't clear the quit flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * exceptions.c (prepare_to_throw_exception): Don't clear the quit
        flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * event-top.c (command_handler): Don't call clear_quit_flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * remote-sim.c (gdb_os_poll_quit): Don't call clear_quit_flag.
        * remote.c (remote_wait_as): Don't call clear_quit_flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * python/python.c: Include "ser-event.h".
        (gdbpy_event_fds): Delete.
        (gdbpy_serial_event): New.
        (gdbpy_run_events): Change prototype.  Use serial_event_clear
        instead of serial_readchar.
        (gdbpy_post_event): Use serial_event_set instead of serial_write.
        (gdbpy_initialize_events): Use make_serial_event instead of
        serial_pipe.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * defs.h: Extend QUIT-related comments to mention
        interruptible_select.
        (quit_serial_event_set, quit_serial_event_clear): Declare.
        * event-top.c: Include "ser-event.h" and "gdb_select.h".
        (quit_serial_event): New global.
        (async_init_signals): Make quit_serial_event.
        (quit_serial_event_set, quit_serial_event_clear)
        (quit_serial_event_fd, interruptible_select): New functions.
        * extension.c (set_quit_flag): Set the quit serial event.
        (check_quit_flag): Clear the quit serial event.
        * gdb_select.h (interruptible_select): New declaration.
        * guile/scm-ports.c (ioscm_input_waiting): Use
        interruptible_select instead of gdb_select.
        * top.c (gdb_readline_no_editing): Likewise.
        * ui-file.c (stdio_file_read): Likewise.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * event-loop.c: Include "ser-event.h".
        (async_signal_handlers_serial_event): New global.
        (async_signals_handler, initialize_async_signal_handlers): New
        functions.
        (mark_async_signal_handler): Set
        async_signal_handlers_serial_event.
        (invoke_async_signal_handlers): Clear
        async_signal_handlers_serial_event.
        * event-top.c (async_init_signals): Call
        initialize_async_signal_handlers.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * Makefile.in (SFILES): Add ser-event.c.
        (HFILES_NO_SRCDIR): Add ser-event.h.
        (COMMON_OBS): Add ser-event.o.
        * ser-event.c, ser-event.h: New files.
        * serial.c (new_serial): New function, factored out from
        (serial_fdopen_ops): ... this.
        (serial_open_ops_1): New function, factored out from
        (serial_open): ... this.
        (serial_open_ops): New function.
        * serial.h (struct serial): Forware declare.
        (serial_open_ops): New declaration.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * serial.c (serial_open, serial_fdopen_ops, do_serial_close):
        Remove references to name.
        * serial.h (struct serial) <name>: Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * remote-fileio.c (sigint_fileio_token, remote_fio_no_longjmp):
        Delete.
        (async_remote_fileio_interrupt): Delete.
        (remote_fileio_ctrl_c_signal_handler): Don't call the async signal
        handler.  Instead just always set the ctrl_c flag.
        (remote_fileio_reply): Clear remote_fio_ctrl_c_flag before
        re-enabling the SIGINT handler.
        (remote_fileio_func_open, remote_fileio_func_close)
        (remote_fileio_func_read, remote_fileio_func_write)
        (remote_fileio_func_lseek, remote_fileio_func_rename)
        (remote_fileio_func_unlink, remote_fileio_func_stat)
        (remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
        (remote_fileio_func_isatty, remote_fileio_func_system)
        (remote_fileio_request): Remove references to
        remote_fio_no_longjmp.
        (initialize_remote_fileio): Don't create an async signal handler.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * event-top.c (stdin_event_handler): Call QUIT;
        (prompt_for_continue): Don't run with immediate_quit set.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * tui/tui-io.c (tui_redisplay_readline): Check
        gdb_in_secondary_prompt_p instead of immediate_quit.
        * tui/tui.c: Include top.h.
        (tui_rl_startup_hook): Check gdb_in_secondary_prompt_p instead of
        immediate_quit.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * top.c (read_command_file): Inline command_loop here.
        (command_loop): Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * top.c: Include "gdb_select.h".
        (gdb_readline_no_editing): Wait for input with gdb_select instead
        of blocking in fgetc.
        (command_line_input): Don't set immediate_quit.

2016-04-08  Martin Galvan  <martin.galvan@tallertechnologies.com>

        * value.c (value_next): Make pass-by-reference parameters const-correct.
        (value_parent): Likewise.
        (value_enclosing_type): Likewise.
        (value_lazy): Likewise.
        (value_stack): Likewise.
        (value_embedded_offset): Likewise.
        (value_pointed_to_offset): Likewise.
        (value_raw_address): Likewise.
        (deprecated_value_modifiable): Likewise.
        (value_free_to_mark): Likewise.
        (value_release_to_mark): Likewise.
        (internalvar_name): Likewise.
        (readjust_indirect_value_type): Likewise.
        (value_initialized): Likewise.
        * value.h (value_next): Likewise.
        (value_parent): Likewise.
        (value_enclosing_type): Likewise.
        (value_lazy): Likewise.
        (value_stack): Likewise.
        (value_embedded_offset): Likewise.
        (value_pointed_to_offset): Likewise.
        (value_raw_address): Likewise.
        (deprecated_value_modifiable): Likewise.
        (value_free_to_mark): Likewise.
        (value_release_to_mark): Likewise.
        (internalvar_name): Likewise.
        (readjust_indirect_value_type): Likewise.
        (value_initialized): Likewise.

2016-04-07  Yao Qi  <yao.qi@linaro.org>

        * record-full.c (record_full_insert_breakpoint): Return
        early if entry on the address is found in
        record_full_breakpoints.

2016-04-07  Yao Qi  <yao.qi@linaro.org>

        * record-full.c (record_full_insert_breakpoint): Set
        bp_tgt->reqstd_address and bp_tgt->placed_size.

2016-04-06  Don Breazeal  <donb@codesourcery.com>

        * value.c (value_actual_type): Don't try to get rtti type
        of the value if it has been optimized out.
        (value_optimized_out): If a memory access error occurs,
        just check vaue->optimized_out.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Revert the previous commit adding unknown_v_replies_ok.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * remote.c (struct remote_state): New field unknown_v_replies_ok.
        (packet_config_support): Read it.
        (remote_start_remote): Set it.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * remote.c: Revert check-in by a mistake in the previous commit.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * exec.c (exec_file_locate_attach): Print warning for unsupported
        target_pid_to_exec_file.
        * symfile-mem.c (add_vsyscall_page): Remove the "file" command
        message part.

2016-04-04  Simon Marchi  <simon.marchi@ericsson.com>

        * cli/cli-decode.c (help_cmd_list): Fix function doc and remove
        trailing spaces.

2016-04-01  Artemiy Volkov  <artemiyv@acm.org>

        PR gdb/19820
        * eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
        the type of BINOP_REPEAT's second operand.

2016-03-31  Yichao Yu  <yyc1992@gmail.com>

        PR gdb/19858
        * jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
        got the breakpoint at the right address.
        (jit_inferior_created): New function.
        (_initialize_jit): Install jit_inferior_created as
        inferior_created observer.

2016-03-31  Marcin Kościelnicki  <koriakin@0x04.net>

        * NEWS: Mention support for tracepoints on powerpc*-linux.

2016-03-31  Catalin Udma  <catalin.udma@freescale.com>

        PR python/19743
        * python/python.c (execute_gdb_command): Use console uiout
        when executing gdb command.
        * utils.c (restore_ui_out_closure): New structure.
        (do_restore_ui_out): New function.
        (make_cleanup_restore_ui_out): Likewise.
        * utils.h (make_cleanup_restore_ui_out): Declare.

2016-03-31  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention that support for "target m32rsdi", "target mips",
        "target pmon", "target ddb", "target rockhopper", and "target lsi"
        was removed.
        * Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
        remote-mips.o.
        (ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
        * configure.tgt: Remove all references to remote-m32r-sdi.o and
        remote-mips.o.
        * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
        function.
        * mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
        declaration.
        * remote-m32r-sdi.c, remote-mips.c: Delete files.
        * symfile.c (generic_load, generic_load): Remove comments.

2016-03-30  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_epilogue_frame_this_id): Check 'func' against
        0 rather than NULL.

2016-03-30  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c: (arm_make_epilogue_frame_cache): New function.
        (arm_epilogue_frame_this_id): New function.
        (arm_epilogue_frame_prev_register): New function.
        (arm_epilogue_frame_sniffer): New function.
        (arm_epilogue_frame_unwind): New.
        (arm_gdbarch_init): Append unwinder arm_epilogue_frame_unwind.

2016-03-30  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_stack_frame_destroyed_p): Rename it ...
        (arm_stack_frame_destroyed_p_1): ... here.  Don't call
        arm_pc_is_thumb.
        (arm_stack_frame_destroyed_p): Call
        thumb_stack_frame_destroyed_p and
        arm_stack_frame_destroyed_p_1.

2016-03-30  Doug Evans  <dje@google.com>

        * python/py-utils.c (host_string_to_python_string): New function.
        * python/python-internal.h (host_string_to_python_string): Declare it.
        * python/py-*.c (*): Update all calls to
        PyString_Decode (str, strlen (str), host_charset (), NULL);
        to use host_string_to_python_string instead.

2016-03-30  Marcin Kościelnicki  <koriakin@0x04.net>

        * remote.c (remote_check_symbols): Allocate own buffer for reply.

2016-03-29  Max Filippov  <jcmvbkbc@gmail.com>

        * xtensa-tdep.c (xtensa_frame_cache): Change op1 type to LONGEST.
        Use safe_read_memory_integer instead of read_memory_integer.

2016-03-29  Marcin Kościelnicki  <koriakin@0x04.net>

        * NEWS: Mention support for tracepoints on s390*-linux.

2016-03-29  Don Breazeal  <donb@codesourcery.com>

        * gdb/value.c (value_actual_type): Fix formatting issue.

2016-03-23  Yao Qi  <yao.qi@linaro.org>

        * gdbarch.sh (software_single_step): Remove comments.
        * gdbarch.h: Regenerated.

2016-03-21  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_record_media): New.
        (arm_record_ld_st_reg_offset): Call arm_record_media.

2016-03-21  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_canonicalize_syscall): Canonicalize
        more syscalls.

2016-03-18  Yao Qi  <yao.qi@linaro.org>

        * sparc-tdep.c (sparc_software_single_step): Make it static.
        * sparc-tdep.h (sparc_software_single_step): Remove declaration.

2016-03-18  Yao Qi  <yao.qi@linaro.org>

        * spu-tdep.c (spu_software_single_step): Throw error when
        target_read_memory fails.

2016-03-17  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * linux-thread-db.c (check_pid_namespace_match): Extend the message.

2016-03-17  Pedro Alves  <palves@redhat.com>
            Don Breazeal  <donb@codesourcery.com>

        PR remote/19496
        * infcmd.c (notice_new_inferior): Use the 'leave_running' argument
        instead of checking the 'non_stop' global.
        * remote.c (remote_add_thread): New parameter 'executing'.  Use it
        to set the new thread's executing state.
        (remote_notice_new_inferior): Rename parameter 'running' to
        'executing'.  Always set the thread state to THREAD_RUNNING in
        non-stop mode, and to THREAD_STOPPED in all-stop mode.  Pass
        EXECUTING to remote_add_thread and notice_new_inferior.
        (remote_update_thread_list): Update to pass executing state, not
        running state.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * syscalls/s390-linux.xml: Add NUMA syscalls and new syscalls up
        to 374.
        * syscalls/s390x-linux.xml: Likewise.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * linux-record.c (record_mem_at_reg): New helper function.
        (record_linux_system_call): Exploit new helper function where
        applicable.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * linux-record.c: Fix whitespace issues; tabify, remove trailing
        spaces.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * linux-record.c (record_linux_system_call): Add missing return
        statements to handling of pipe and pipe2 syscalls.

2016-03-16  Doug Evans  <dje@google.com>

        * xml-tdesc.c (tdesc_start_enum): Fix c++ build.

2016-03-16  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_init_abi): Fix
        arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
        arm_linux_record_tdep.arg3.  Set arm_linux_record_tdep.arg4,
        arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
        arm_linux_record_tdep.arg7.

2016-03-15  Keith Seitz  <keiths@redhat.com>

        PR breakpoints/18303
        * cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
        look for "::" instead of simply ":".
        (cp_search_static_and_baseclasses): Return null_block_symbol for
        malformed input.
        Remove assertions.
        * cp-support.c (cp_find_first_component_aux): Do not return
        a prefix length for ':' unless the next character is also ':'.

2016-03-15  Doug Evans  <dje@google.com>

        * features/aarch64-core.xml (cpsr_flags): New flags type.
        (cpsr): Use it.
        * features/aarch64.c: Regenerate.

2016-03-15  Doug Evans  <dje@google.com>

        * features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
        * features/i386/32bit-sse.xml (i386_eflags): Ditto.
        * features/i386/64bit-core.xml (i386_eflags): Ditto.
        * features/i386/64bit-sse.xml (i386_eflags): Ditto.
        * features/i386/x32-core.xml (i386_eflags): Ditto.

2016-03-15  Doug Evans  <dje@google.com>
            Wei-cheng Wang  <cole945@gmail.com>

        Extend flags to support multibit and enum bitfields.
        * NEWS: Document new features.
        * c-typeprint.c (c_type_print_varspec_prefix): Handle TYPE_CODE_FLAGS.
        (c_type_print_varspec_suffix, c_type_print_base): Ditto.
        * gdbtypes.c (arch_flags_type): Don't assume all fields are one bit.
        (append_flags_type_field): New function.
        (append_flags_type_flag): Call it.
        * gdbtypes.h (append_flags_type_field): Declare.
        * target-descriptions.c (struct tdesc_type_flag): Delete.
        (enum tdesc_type_kind) <TDESC_TYPE_BOOL>: New enum value.
        (enum tdesc_type_kind) <TDESC_TYPE_ENUM>: Ditto.
        (struct tdesc_type) <u.f>: Delete.
        (tdesc_predefined_types): Add "bool".
        (tdesc_predefined_type): New function.
        (tdesc_gdb_type): Handle TDESC_TYPE_BOOL, TDESC_TYPE_ENUM.
        Update TDESC_TYPE_FLAGS support.
        (tdesc_free_type): Handle TDESC_TYPE_ENUM.  Update TDESC_TYPE_FLAGS.
        (tdesc_create_flags): Update.
        (tdesc_create_enum): New function.
        (tdesc_add_field): Initialize start,end to -1.
        (tdesc_add_typed_bitfield): New function.
        (tdesc_add_bitfield): Call it.
        (tdesc_add_flag): Allow TDESC_TYPE_STRUCT.  Update.
        (tdesc_add_enum_value): New function.
        (maint_print_c_tdesc_cmd): Fold TDESC_TYPE_FLAGS support into
        TDESC_TYPE_STRUCT.  Handle TDESC_TYPE_ENUM.
        * target-descriptions.h (tdesc_create_enum): Declare.
        (tdesc_add_typed_bitfield, tdesc_add_enum_value): Declare.
        * valprint.c (generic_val_print_enum_1): New function.
        (generic_val_print_enum): Call it.
        (val_print_type_code_flags): Make static.  Handle multibit bitfields
        and enum bitfields.
        * valprint.h (val_print_type_code_flags): Delete.
        * xml-tdesc.c (struct tdesc_parsing_data) <current_type_is_flags>:
        Delete.  All uses removed.
        (tdesc_start_enum): New function.
        (tdesc_start_field): Handle multibit and enum bitfields.
        (tdesc_start_enum_value): New function.
        (enum_value_attributes, enum_children, enum_attributes): New static
        globals.
        (feature_children): Add "enum".
        * features/gdb-target.dtd (enum, evalue): New elements.

2016-03-15  Doug Evans  <dje@google.com>

        * target-descriptions.c (struct tdesc_type) <u.u.size>: Change type
        from LONGEST to int.
        (struct tdesc_type) <u.f.size>: Ditto.
        (tdesc_set_struct_size): Change type of "size" arg from LONGEST
        to int.  Add assertion size > 0.
        (tdesc_create_flags): Ditto.
        * target-descriptions.h (tdesc_set_struct_size): Update.
        (tdesc_create_flags): Update.
        * xml-tdesc.c (MAX_FIELD_SIZE, MAX_FIELD_BITSIZE): New macros.
        (MAX_VECTOR_SIZE): New macro.
        (tdesc_start_struct): Catch conversion errors from LONGEST to int.
        (tdesc_start_flags, tdesc_start_field, tdesc_start_vector): Ditto.

2016-03-15  Doug Evans  <dje@google.com>

        * target-descriptions.c (maint_print_c_tdesc_cmd): Use "type" for
        TYPE_CODE_FLAGS instead of "field_type", for consistency.
        * features/i386/amd64-avx-linux.c: Regenerate.
        * features/i386/amd64-avx.c: Regenerate.
        * features/i386/amd64-avx512-linux.c: Regenerate.
        * features/i386/amd64-avx512.c: Regenerate.
        * features/i386/amd64-linux.c: Regenerate.
        * features/i386/amd64-mpx-linux.c: Regenerate.
        * features/i386/amd64-mpx.c: Regenerate.
        * features/i386/amd64.c: Regenerate.
        * features/i386/i386-avx-linux.c: Regenerate.
        * features/i386/i386-avx.c: Regenerate.
        * features/i386/i386-avx512-linux.c: Regenerate.
        * features/i386/i386-avx512.c: Regenerate.
        * features/i386/i386-linux.c: Regenerate.
        * features/i386/i386-mmx-linux.c: Regenerate.
        * features/i386/i386-mmx.c: Regenerate.
        * features/i386/i386-mpx-linux.c: Regenerate.
        * features/i386/i386-mpx.c: Regenerate.
        * features/i386/i386.c: Regenerate.
        * features/i386/x32-avx-linux.c: Regenerate.
        * features/i386/x32-avx.c: Regenerate.
        * features/i386/x32-avx512-linux.c: Regenerate.
        * features/i386/x32-avx512.c: Regenerate.
        * features/i386/x32-linux.c: Regenerate.
        * features/i386/x32.c: Regenerate.

2016-03-15  Pedro Alves  <palves@redhat.com>

        PR gdb/19676
        * linux-thread-db.c (try_thread_db_load_1): Leave
        info->td_ta_thr_iter_p NULL iff debugging a live process and we
        have /proc access.
        (find_new_threads_once): Assert that we have a non-NULL
        info->td_ta_thr_iter_p instead of checking whether the target has
        execution.

2016-03-15  Pedro Alves  <palves@redhat.com>

        PR gdb/19676
        * infrun.c (displaced_step_prepare): Also disable displaced
        stepping on NOT_SUPPORTED_ERROR.
        * linux-tdep.c (linux_displaced_step_location): If reading auxv
        fails, throw NOT_SUPPORTED_ERROR instead of generic error.

2016-03-13  Marcin Kościelnicki  <koriakin@0x04.net>

        * s390-linux-tdep.c (s390_gen_return_address): New function.
        (s390_gdbarch_init): Fill gen_return_address hook.

2016-03-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * symmisc.c (maintenance_info_line_tables): New function.
        (maintenance_print_one_line_table): New function.
        (_initialize_symmisc): Register 'maint info line-table' command.
        * NEWS: Mention new command.

2016-03-11  Marcin Kościelnicki  <koriakin@0x04.net>

        * s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
        (s390_ax_pseudo_register_push_stack): New function.
        (s390_gdbarch_init): Fill ax_pseudo_register_collect and
        ax_pseudo_register_push_stack hooks.

2016-03-10  Simon Marchi  <simon.marchi@polymtl.ca>

        * data-directory/Makefile.in (PYTHON_FILE_LIST): Install
        gdb/function/as_string.py.
        * python/lib/gdb/function/as_string.py: New file.
        * NEWS: Mention the new $_as_string function.

2016-03-09  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * target.h: Fix doc string of target_can_use_hardware_watchpoint.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * event-top.c (more_to_come): Delete.
        (struct readline_input_state): Delete.
        (readline_input_state): Delete.
        (get_command_line_buffer): New function.
        (command_handler): Update comments.  Don't handle NULL commands
        here.  Do not execute commented lines.
        (command_line_append_input_line): New function.
        (handle_line_of_input): New function, partly based on
        command_line_handler and command_line_input.
        (command_line_handler): Rewrite.
        * event-top.h (command_handler): New declaration.
        (command_loop): Defer command execution to command_handler.
        (command_line_input): Update comments.  Simplify, using struct
        buffer and handle_line_of_input.
        * top.h (struct buffer): New forward declaration.
        (handle_line_of_input): New declaration.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * event-top.c (command_line_handler): Use xfree + xstrdup instead
        of xrealloc + strcpy.
        * main.c (captured_main): Use xstrdup instead of xmalloc plus
        manual clear.
        * top.c (saved_command_line): Rewrite comment.
        (saved_command_line_size): Delete.
        (command_line_input): Use xfree + xstrdup instead of xrealloc +
        strcpy.
        * top.h (saved_command_line_size): Delete declaration.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * event-top.c: Include buffer.h.
        (gdb_readline_no_editing_callback): Use struct buffer instead
        of xrealloc.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * common/buffer.h (buffer_grow_char): New function.
        * top.c: Include buffer.h.
        (gdb_readline_no_editing): Rename 'prompt_arg' parameter to
        'prompt'.  Use struct buffer instead of xrealloc.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * defs.h (gdb_readline): Delete declaration.
        * top.c (gdb_readline): Rename to ...
        (gdb_readline_no_editing): ... this, and make static.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * utils.c (prompt_for_continue): Update comments.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * event-top.c (async_annotation_suffix): Delete.
        (top_level_prompt, command_line_handler): Don't use
        'async_annotation_suffix' and simplify.
        * event-top.h (async_annotation_suffix): Delete declaration.
        (init_main): Remove reference to 'async_annotation_suffix'.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * event-top.c (gdb_readline2): Rename to ...
        (gdb_readline_no_editing_callback): ... this.
        (change_line_handler, stdin_event_handler)
        (gdb_setup_readline): Adjust.
        * event-top.h (gdb_readline2): Rename to ...
        (gdb_readline_no_editing_callback): ... this, and move closer to
        other readline-related declarations.
        * mi/mi-interp.c (mi_interpreter_resume): Adjust.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * top.c (window_hook): Delete.
        (command_loop): Remove references to window_hook.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

        * corefile.c (safe_read_memory_unsigned_integer): New function.
        * gdbcore.h (safe_read_memory_unsigned_integer): New prototype.
        * rs6000-tdep.c (rs6000_frame_cache): Read backchain as unsigned.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

        * rs6000-tdep.c: Add "ax.h" and "ax-gdb.h" includes.
        (rs6000_gen_return_address): New function.
        (rs6000_gdbarch_init): Wire in the above.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

        * rs6000-tdep.c (rs6000_ax_pseudo_register_collect): New function.
        (rs6000_gdbarch_init): Wire in the above.

2016-03-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_analyze_prologue): Ignore BRC and BRCL
        instructions that do nothing or are conditional traps.

2016-03-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_prologue_frame_unwind_cache): Store
        frame func's PC in info->func before any other failure can occur.
        (s390_frame_this_id): Use frame_id_build_unavailable_stack if
        info->func has been filled out.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * osabi.c (gdb_osabi_names): Avoid spaces in osabi names.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * frv-tdep.c (frv_gdbarch_init): Handle bfd_mach_fr300.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * cris-tdep.c (cris_gdbarch_init): Return 0 if the info's byte
        order is BFD_ENDIAN_BIG or if the cris version is unsupported.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * doublest.c: Extend comments.
        (floatformat_to_doublest, floatformat_from_doublest): Copy the
        floatformat's total size, not the host type's size.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * doublest.c (floatformat_totalsize_bytes): New function.
        (floatformat_from_type): Assert that the type's length is at least
        as long as the floatformat's totalsize.
        * doublest.h (floatformat_totalsize_bytes): New declaration.
        * gdbtypes.c (arch_float_type): Assert that the type's length is
        at least as long as the floatformat's totalsize.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * hppa-linux-tdep.c (hppa_linux_init_abi): Set the long double
        format to floatformats_ieee_double.

2016-03-07  Pedro Alves  <palves@redhat.com>

        * mips-tdep.c (mips_gdbarch_init): Check whether info.abfd is NULL
        before calling bfd_get_flavour.

2016-03-05  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>

        * avr-tdep.c (AVR_LAST_ARG_REGNUM): Define.
        (avr_push_dummy_call): Correct last needed argument register.
        Write MSB of argument into register and subsequent bytes into
        other registers in decreasing order.

2016-03-04  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_record_vdata_transfer_insn): Simplify the
        condition check.  Record the right D register number.

2016-03-04  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_record_extension_space): Remove code
        printing "Process record does not support".
        (arm_record_data_proc_misc_ld_str): Likewise.
        (decode_insn): Call arm_record_extension_space if condition
        is 0xf.  Call arm_record_unsupported_insn if ret isn't
        ARM_RECORD_SUCCESS.  Use 'ret' instead of 'insn_id' to hold
        the value of thumb2_record_decode_insn_handler.

2016-03-04  Simon Marchi  <simon.marchi@ericsson.com>

        * features/feature_to_c.sh: Print the help when passing no
        argument.

2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>

        * MAINTAINERS (Write After Approval): Add Bernhard Heckel.

2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>

        * dwarf2read.c (new_symbol_full): Fix detection of gfortran compilers.

2016-03-01  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_backchain_frame_unwind_cache): Avoid
        exception when attempting to access the inferior's backchain.

2016-02-29  Yao Qi  <yao.qi@linaro.org>

        * aarch64-linux-tdep.c (aarch64_canonicalize_syscall): Support
        eventfd2, eventfd2, dup3, inotify_init1, fallocate and pipe2.
        Return gdb_sys_epoll_create1 instead of gdb_sys_epoll_create
        for aarch64_sys_epoll_create1.

2016-02-29  Yao Qi  <yao.qi@linaro.org>

        * linux-record.h (enum gdb_syscall) <gdb_sys_fallocate>: New.
        <gdb_sys_eventfd2, gdb_sys_epoll_create1, gdb_sys_dup3>: New.
        <gdb_sys_pipe2, gdb_sys_inotify_init1>: New.
        * linux-record.c (record_linux_system_call): Handle them.

2016-02-28  Iain Buclaw  <ibuclaw@gdcproject.org>

        * d-namespace.c (d_lookup_symbol_imports): Avoid recursive lookups from
        cyclic imports.

2016-02-26  Keith Seitz  <keiths@redhat.com>

        * rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
        to avoid invalid conversion from void *.

2016-02-26  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
        per bit 8.  Check bit 20 instead of bit 4 for VMOV
        instruction.  Record D registers for instructions changing
        S registers.  Change of the order of length and address
        in record_buf_mem array.

2016-02-26  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
        number of Rd.

2016-02-25  Doug Evans  <dje@google.com>

        * remote-m32r-sdi.c (recv_char_data): Initialize val to avoid
        compiler warning.
        (recv_long_data): Ditto.

2016-02-25  Simon Marchi  <simon.marchi@ericsson.com>

        * i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
        Initialize variables.

2016-02-25  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * ax-general.c (ax_reg): Call gdbarch_remote_register_number.
        (ax_reg_mask): Likewise.

2016-02-24  Pedro Alves  <palves@redhat.com>

        * linux-nat.c (save_sigtrap) Delete.
        (stop_wait_callback): Call save_stop_reason instead of
        save_sigtrap.
        (check_stopped_by_breakpoint): Rename to ...
        (save_stop_reason): ... this.  Bits of save_sigtrap folded here.
        Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
        GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT.  Factor out
        common code between the USE_SIGTRAP_SIGINFO and
        !USE_SIGTRAP_SIGINFO blocks.
        (linux_nat_filter_event): Call save_stop_reason instead of
        save_sigtrap.
        * nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
        si_code for MIPS.
        * nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table.  Add
        comments on MIPS behavior.
        (GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.

2016-02-24  Marcin Kościelnicki  <koriakin@0x04.net>

        * rs6000-tdep.c (rs6000_frame_cache): Initialize frame and pc to 0
        to avoid spurious warnings.

2016-02-24  Gary Benson  <gbenson@redhat.com>

        * exec.c (exec_file_locate_attach): Do not attempt to
        locate main executable locally if not found in sysroot.

2016-02-24  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.11 released.

2016-02-24  Wei-cheng Wang  <cole945@gmail.com>

        * rs6000-tdep.c (rs6000_frame_cache, rs6000_frame_this_id): Handle
        unavailable PC/SP to build unavailable frame.

2016-02-23  Doug Evans  <dje@google.com>

        Extend "skip" command to support -file, -gfile, -function, -rfunction.
        * NEWS: Document new features.
        * skip.c: #include "fnmatch.h", "gdb_regex.h".
        (skiplist_entry) <file>: Renamed from filename.
        <function>: Renamed from function_name.
        <file_is_glob, function_is_regexp>: New members.
        <compiled_function_regexp, compiled_function_regexp_is_valid>:
        New members.
        (make_skip_entry): New function.
        (free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
        (make_free_skiplist_entry_cleanup): New function.
        (skip_file_command): Update.
        (skip_function, skip_function_command): Update.
        (compile_skip_regexp): New functions.
        (skip_command): Add support for new options.
        (skip_info): Update.
        (skip_file_p, skip_gfile_p): New functions.
        (skip_function_p, skip_rfunction_p): New functions.
        (function_name_is_marked_for_skip): Update and simplify.
        (_initialize_step_skip): Update.
        * symtab.c: #include "fnmatch.h".
        (compare_glob_filenames_for_search): New function.
        * symtab.h (compare_glob_filenames_for_search): Declare.
        * utils.c (count_path_elements): New function.
        (strip_leading_path_elements): New function.
        * utils.h (count_path_elements): Declare.
        (strip_leading_path_elements): Declare.

2016-02-23  Simon Marchi  <simon.marchi@ericsson.com>

        * arm-tdep.c (arm_decode_svc_copro): Remove "to" parameter.
        (thumb_process_displaced_insn): Likewise.
        (arm_process_displaced_insn): Adjust calls.

2016-02-23  Yao Qi  <yao.qi@linaro.org>

        * aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>:
        Remove.
        <aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove.
        <aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove.
        <aarch64_sys_mknodat, aarch64_sys_mkdirat>: New.
        <aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New.
        <aarch64_sys_linkat, aarch64_sys_renameat>: New.
        <aarch64_sys_faccessat>: New.
        <aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove.
        <aarch64_sys_openat, aarch64_sys_readlinkat>: New.
        <aarch64_sys_newfstatat>: New.
        (UNSUPPORTED_SYSCALL_MAP): New macro.
        (aarch64_canonicalize_syscall): Add missing syscalls.

2016-02-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print.

2016-02-22  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c: Fix code format issues.

2016-02-21  Iain Buclaw  <ibuclaw@gdcproject.org>

        * d-namespace.c (d_lookup_symbol_imports): Remove argument
        'search_parents'.  All callers updated.

2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>

        * s390-linux-tdep.c (s390_guess_tracepoint_registers): New function.
        (s390_gdbarch_init): Fill guess_tracepoint_registers hook.

2016-02-18  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * NEWS: Add entry for bound violation.
        * amd64-linux-tdep.c (amd64_linux_init_abi_common):
        Add handler for segmentation fault.
        * gdbarch.sh (handle_segmentation_fault): New.
        * gdbarch.c: Regenerate.
        * gdbarch.h: Regenerate.
        * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
        (SIG_CODE_BONDARY_FAULT): New define.
        (i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
        * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
        * i386-tdep.c (i386_mpx_enabled): Add as external.
        * i386-tdep.c (i386_mpx_enabled): Add as external.
        * infrun.c (handle_segmentation_fault): New function.
        (print_signal_received_reason): Use handle_segmentation_fault.

2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>

        * arch-utils.c (default_guess_tracepoint_registers): New function.
        * arch-utils.h (default_guess_tracepoint_registers): New prototype.
        * gdbarch.c: Regenerate.
        * gdbarch.h: Regenerate.
        * gdbarch.sh: Add guess_tracepoint_registers hook.
        * tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook.

2016-02-17  Gary Benson  <gbenson@redhat.com>

        * exec.c (exec_file_locate_attach): Add missing cleanup.

2016-02-16  Don Breazeal  <donb@codesourcery.com>

        PR remote/19496
        * remote.c (remove_new_fork_children): Check for pending
        fork status in thread_info.suspend.

2016-02-16  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_software_single_step): Assign
        'old_chain' later.

2016-02-16  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
        <syscall_next_pc>: Remove argument PC.  Callers updated.
        * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
        Remove argument PC.  Get pc from regcache_read_pc.
        * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
        argument PC.

2016-02-15  Yao Qi  <yao.qi@linaro.org>

        * aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x".

2016-02-12  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-linux.c (arm_linux_get_next_pcs_fixup): Calculate
        nextpc according to instruction.

2016-02-12  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
        self->ops->fixup if it isn't NULL.
        * arch/arm-get-next-pcs.h: Include gdb_vecs.h.
        (struct arm_get_next_pcs_ops) <fixup>: New field.
        * arch/arm-linux.c: Include common-regcache.h and
        arch/arm-get-next-pcs.h.
        (arm_linux_get_next_pcs_fixup): New function.
        * arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
        * arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
        it with arm_linux_get_next_pcs_fixup.
        (arm_linux_software_single_step): Move code to
        arm_linux_get_next_pcs_fixup.
        * arm-tdep.c (arm_get_next_pcs_ops): Initialize it.

2016-02-12  Marcin Kościelnicki  <koriakin@0x04.net>

        * xml-tdesc.c (target_fetch_description_xml) [!HAVE_LIBEXPAT]: Warn
        and return NULL.

2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>

        * frame.h (skip_tailcall_frames): Update comment.
        * frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL
        if only artificial frames are found.  Update comment.
        (frame_unwind_caller_id): Handle NULL return.
        (frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that
        skip_artificial_frames does not return NULL.
        (frame_pop): Add an error if only tailcall frames are found.
        * infcmd.c (finish_command): Move skip_tailcall_frames call into
        forward-execution case.  Add an error if only tailcall frames are
        found.

2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>

        * stack.c (frame_info): Check frame_unwind_caller_id.

2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>

        * frame.h (skip_tailcall_frames): New.
        * frame.c (skip_tailcall_frames): New.
        (frame_pop): Call skip_tailcall_frames.
        * infcmd.c (finish_command): Call skip_tailcall_frames.

2016-02-11  Pedro Alves  <palves@redhat.com>

        * Makefile.in (check-parallel): New rule.

2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>

        * arm-tdep.c (arm_skip_prologue): Remove unused variables.
        (arm_analyze_prologue): Likewise.
        (arm_scan_prologue): Likewise.
        (arm_m_exception_prev_register): Likewise.
        (arm_copy_block_xfer): Likewise.
        (thumb2_copy_block_xfer): Likewise.
        (arm_decode_miscellaneous): Likewise.
        (arm_decode_ld_st_word_ubyte): Likewise.
        (arm_decode_svc_copro): Likewise.
        (thumb2_decode_svc_copro): Likewise.
        (thumb_copy_16bit_ldr_literal): Likewise.
        (thumb_copy_pop_pc_16bit): Likewise.
        (decode_thumb_32bit_ld_mem_hints): Likewise.
        (arm_show_force_mode): Likewise.
        (_initialize_arm_tdep): Likewise.
        (arm_record_strx): Likewise.
        (arm_record_extension_space): Likewise.
        (arm_record_data_proc_misc_ld_str): Likewise.
        (arm_record_exreg_ld_st_insn): Likewise.
        (arm_record_vfp_data_proc_insn): Likewise.
        (arm_record_coproc_data_proc): Likewise.
        (thumb_record_misc): Likewise.
        (thumb_record_ldm_stm_swi): Likewise.
        (thumb2_record_ld_st_dual_ex_tbb): Likewise.
        (thumb2_record_ld_mem_hints): Likewise.
        (thumb2_record_lmul_lmla_div): Likewise.
        (thumb2_record_asimd_struct_ld_st): Likewise.
        (arm_process_record): Likewise.

2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>

        * arm-tdep.c (arm_displaced_step_copy_insn): Remove.
        (ARM displaced stepping support): Remove reference to
        arm_displaced_step_copy_insn in comment.
        * arm-tdep.h (arm_displaced_step_copy_insn): Remove.
        * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove
        reference to arm_displaced_step_copy_insn in comment.

2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>

        * arm-tdep.c (thumb_copy_unmodified_16bit): Change type of insn.
        (thumb_copy_b): Likewise.
        (arm_decode_b_bl_ldmstm): Likewise.
        (thumb_copy_16bit_ldr_literal): Likewise.
        (thumb_copy_pop_pc_16bit): Likewise.

2016-02-11  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * tracepoint.c (encode_actions_1): Use target_gdbarch () rather
        than loc->gdbarch.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * tracefile-tfile.c (trace_tdesc): New static variable.
        (tfile_open): Clear trace_tdesc, call target_find_description.
        (tfile_interp_line): Recognize tdesc lines.
        (tfile_close): Clear trace_tdesc.
        (tfile_xfer_partial_features): New function.
        (tfile_xfer_partial): Call tfile_xfer_partial_features.
        (tfile_append_tdesc_line): New function.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * ctf.c (ctf_write_tdesc): New function.
        (ctf_write_ops): Wire in ctf_write_tdesc.
        * tracefile-tfile.c (tfile_write_tdesc): New function.
        (tfile_write_ops): Wire in tfile_write_tdesc.
        * tracefile.c (trace_save): Call write_tdesc method.
        * tracefile.h (struct trace_file_write_ops): Add write_tdesc method.
        * xml-tdesc.c (target_fetch_description_xml): New function.
        * xml-tdesc.h: Add target_fetch_description_xml prototype.

2016-02-10  Simon Marchi  <simon.marchi@ericsson.com>

        * arm-tdep.c (arm_copy_extra_ld_st): Fix "unpriveleged" typo.
        (arm_decode_dp_misc): Likewise.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * amd64-tdep.c (amd64_ax_pseudo_register_collect): New function.
        (amd64_init_abi): Fill ax_pseudo_register_collect hook.
        * gdb/i386-tdep.c (i386_pseudo_register_read_into_value): Remove
        misleading comment.
        (i386_pseudo_register_write): Ditto.
        (i386_ax_pseudo_register_collect): New function.
        (i386_gdbarch_init): Fill ax_pseudo_register_collect hook.
        * i386-tdep.h: Add i386_ax_pseudo_register_collect prototype.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * tracefile-tfile.c (tfile_fetch_registers): Use g packet order
        instead of gdb order.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * tracefile-tfile.c (tfile_fetch_registers): Fix off-by-one in bounds
        check.

2016-02-10  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

2016-02-10  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.11 branch created (9ef9e6a6a0dd8f948708cb67c9afcfd0be40cb0a):
        * version.in: Bump version to 7.11.50.DATE-git.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        PR breakpoints/19546
        * breakpoint.c (breakpoint_event_location_empty_p): New function.
        (update_breakpoints_after_exec, bkpt_re_set): Use this new function
        instead of event_location_empty_p.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use
        string_to_event_location_basic instead of string_to_event_location.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        * guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Skip
        leading whitespace and use string_to_event_location_basic instead
        of new_linespec_location.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        PR python/19506
        * python/py-breakpoint.c (bppy_init): Use
        string_to_event_location_basic instead of new_linespec_location.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        * location.c (string_to_explicit_location): Note that "-p" is
        reserved for probe locations and return NULL for any input
        that starts with that.
        (string_to_event_location): Move "legacy" linespec code to ...
        (string_to_event_location_basic): ... here.
        * location.h (string_to_event_location): Update comment.
        (string_to_event_location_basic): New function.

2016-02-09  Simon Marchi  <simon.marchi@ericsson.com>

        * configure.ac: Use AC_CONFIG_FILES instead of passing arguments
        to AC_OUTPUT.  Remove "exit 0" at the end.
        * configure: Regenerate.

2016-02-09  Pedro Alves  <palves@redhat.com>

        PR breakpoints/19548
        * breakpoint.c (create_overlay_event_breakpoint): Don't update
        global location list here.
        (create_longjmp_master_breakpoint)
        (create_std_terminate_master_breakpoint)
        (create_exception_master_breakpoint, create_jit_event_breakpoint)
        (update_breakpoint_locations):
        (breakpoint_re_set): Update global location list after all
        breakpoints are re-set.

2016-02-08  Simon Marchi  <simon.marchi@ericsson.com>

        * remote.c (remote_register_number_and_offset): Remove unused
        variable(s).
        (remote_thread_always_alive): Likewise.
        (remote_update_thread_list): Likewise.
        (process_initial_stop_replies): Likewise.
        (remote_start_remote): Likewise.
        (remote_check_symbols): Likewise.
        (discard_pending_stop_replies): Likewise.
        (process_stop_reply): Likewise.
        (putpkt_binary): Likewise.
        (getpkt): Likewise.
        (remote_add_target_side_condition): Likewise.
        (remote_insert_breakpoint): Likewise.
        (remote_supports_stopped_by_sw_breakpoint): Likewise.
        (remote_supports_stopped_by_hw_breakpoint): Likewise.
        (remote_xfer_partial): Likewise.
        (remote_read_btrace): Likewise.
        (remote_async_serial_handler): Likewise.
        (remote_thread_events): Likewise.
        (_initialize_remote): Likewise.

2016-02-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * varobj.h (varobj_delete): Remove dellist parameter, update and
        move documentation here.
        * varobj.c (struct cpstack, cppush, cppop): Remove.
        (delete_variable): Remove resultp (first) parameter.
        (delete_variable_1): Likewise.
        (varobj_delete): Remove dellist parameter and unused code.
        (update_dynamic_varobj_children): Adjust varobj_delete call.
        (update_type_if_necessary): Likewise.
        (varobj_set_visualizer): Likewise.
        (varobj_update): Likewise.
        (value_of_root): Likewise.
        (varobj_invalidate_iter): Likewise.
        * mi/mi-cmd-var.c (mi_cmd_var_delete): Likewise.

2016-02-04  Yao Qi  <yao.qi@linaro.org>

        * remote.c (remote_wait_as): Set rs->waiting_for_stop_reply to
        0 before handling 'F' and set it back afterwards.

2016-02-02  Simon Marchi  <simon.marchi@ericsson.com>

        * ui-out.c (MAX_UI_OUT_LEVELS): Remove.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * amd64-linux-siginfo.c (nat_siginfo_t, nat_sigval_t, nat_timeval):
        New types.
        (compat_siginfo): New bound fields added.
        (compat_x32_siginfo): New field added.
        (cpt_si_addr_lsb): New define.
        (compat_siginfo_from_siginfo): Use nat_siginfo.
        (siginfo_from_compat_siginfo): Use nat_siginfo.
        (compat_x32_siginfo_from_siginfo): Likewise.
        (siginfo_from_compat_x32_siginfo): Likewise.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * linux-tdep.c (linux_get_siginfo_type): Add the _addr_bnd
        structure to the siginfo if extra_fields contains
        LINUX_SIGINFO_FIELD_ADDR_BND.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern.
        * linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern.
        * i386-linux-tdep.h (x86_linux_get_siginfo_type): New
        function.
        * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
        x86_linux_get_siginfo_type for the amd64 abi.
        * i386-linux-tdep.c (x86_linux_get_siginfo_type): New
        function.
        (i386_linux_init_abi): Add new function at the i386 ABI
        initialization.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * linux-tdep.h (linux_siginfo_extra_field_values): New enum values.
        (linux_siginfo_extra_fields): New enum type.
        * linux-tdep.c (linux_get_siginfo_type_with_fields): New function.
        (linux_get_siginfo_type): Use new function.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * nat/amd64-linux-siginfo.c: New file.
        * nat/amd64-linux-siginfo.h: New file.
        * Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h.
        (amd64-linux-siginfo.o): New rule.
        * config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o.
        * amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include.
        (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
        (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo)
        (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid)
        (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status)
        (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band)
        (cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c.

2016-02-01  Andrew Burgess  <andrew.burgess@embecosm.com>

        * value.c (max_value_size): New variable.
        (MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
        (set_max_value_size): New function.
        (show_max_value_size): New function.
        (check_type_length_before_alloc): New function.
        (allocate_value_contents): Call check_type_length_before_alloc.
        (set_value_enclosing_type): Likewise.
        (_initialize_values): Add set/show handler for max-value-size.
        * NEWS: Mention new set/show command.

2016-01-31  Simon Marchi  <simon.marchi@polymtl.ca>

        * varobj.h (struct varobj): Fix typos in comments.
        (struct lang_varobj_ops): Likewise.
        * varobj.c (VAROBJ_TABLE_SIZE): Likewise.
        (varobj_create): Move misplaced comment.

2016-01-29  Simon Marchi  <simon.marchi@ericsson.com>

        * aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces
        to for include additional lines.
        * xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces.

2016-01-28  Simon Marchi  <simon.marchi@ericsson.com>

        * gnulib/import/Makefile.am: Regenerate.
        * gnulib/import/Makefile.in: Regenerate.
        * gnulib/import/m4/gnulib-cache.m4: Regenerate.
        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr.

2016-01-28  Simon Marchi  <simon.marchi@ericsson.com>

        * remote.c (skip_to_semicolon): Remove.
        (remote_parse_stop_reply): Use strchrnul instead of
        skip_to_semicolon.
        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
        strchrnul.
        * gnulib/aclocal.m4: Regenerate.
        * gnulib/config.in: Regenerate.
        * gnulib/configure: Regenerate.
        * gnulib/import/Makefile.am: Regenerate.
        * gnulib/import/Makefile.in: Regenerate.
        * gnulib/import/m4/gnulib-cache.m4: Regenerate.
        * gnulib/import/m4/gnulib-comp.m4: Regenerate.
        * gnulib/import/m4/rawmemchr.m4: New file.
        * gnulib/import/m4/strchrnul.m4: New file.
        * gnulib/import/rawmemchr.c: New file.
        * gnulib/import/rawmemchr.valgrind: New file.
        * gnulib/import/strchrnul.c: New file.
        * gnulib/import/strchrnul.valgrind: New file.

2016-01-28  Yao Qi  <yao.qi@linaro.org>

        * breakpoint.c (build_target_command_list): Don't call continue
        if aexpr is NULL.
        (build_target_condition_list): Likewise.

2016-01-27  Kevin Buettner  <kevinb@redhat.com>

        * rx-tdep.c (rx_push_dummy_call): Treat scalars larger than 8
        bytes as aggregates.

2016-01-27  Joel Brobecker  <brobecker@adacore.com>

        * MAINTAINERS (Responsible Maintainers): Add Keith Seitz as
        Linespec Maintainers.

2016-01-26  Simon Marchi  <simon.marchi@ericsson.com>

        * common/common-utils.c (skip_spaces): Fix comment.
        (skip_to_space_const): Likewise.

2016-01-25  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
        Remove argument pc.  Get pc by regcache_read_pc.  Callers updated.
        (arm_deal_with_atomic_sequence_raw): Likewise.
        (thumb_get_next_pcs_raw): Likewise.
        (arm_get_next_pcs_raw): Likewise.
        (arm_get_next_pcs): Remove argument pc.  Callers updated.
        * arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.

2016-01-25  Mark Wielaard  <mjw@redhat.com>

        * ada-lang.c (ada_evaluate_subexp): Add proper else block.
        * c-typeprint.c (c_type_print_base): Fix misleading indentation of
        if statement.
        * inflow.c (child_terminal_ours_1): Fix misleading indentation of
        statement block by introducing an else.
        * linux-record.c (record_linux_sockaddr): Fix misleading indentation
        of return statements.
        (record_linux_msghdr): Likewise.

2016-01-25  Pedro Alves  <palves@redhat.com>

        PR threads/19461
        * infrun.c (handle_inferior_event_1) <fork/vfork>: Update
        parent/child running states.

2016-01-25  Pedro Alves  <palves@redhat.com>

        PR gdb/19494
        * linux-nat.c (kill_one_lwp): New, factored out from ...
        (kill_callback): ... this.
        (kill_wait_callback): New, factored out from ...
        (kill_wait_one_lwp): ... this.
        (kill_unfollowed_fork_children): New function.
        (linux_nat_kill): Use it.

2016-01-22  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_pid_to_str): Adjust string format.

2016-01-22  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-nat.c (fetch_fpregs): Call perror_with_name
        instead of warning.
        (store_fpregs, fetch_regs, store_regs): Likewise.
        (fetch_wmmx_regs, store_wmmx_regs): Likewise.
        (fetch_vfp_regs, store_vfp_regs): Likewise.

2016-01-21  Doug Evans  <dje@google.com>

        * breakpoint.c (init_breakpoint_sal): Add comment.

2016-01-21  Marcin Kościelnicki  <koriakin@0x04.net>

        * ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.

2016-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * disasm.c (maybe_add_dis_line_entry): Rename to...
        (add_dis_line_entry): ...this, and update header comment.
        (do_mixed_source_and_assembly): Now use add_dis_line_entry.

2016-01-21  Pedro Alves  <palves@redhat.com>

        * Makefile.in (COMPILER_CFLAGS): New.
        (CXXFLAGS): Get it from configure.
        (INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
        instead of CFLAGS.
        * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
        COMPILER_CFLAGS.
        * configure: Regenerate.

2016-01-21  Joel Brobecker  <brobecker@adacore.com>

        * location.h (new_address_location): Add new parameters
        "addr_string" and "addr_string_len".
        (get_address_string_location): Add declaration.
        * location.c (new_address_location): Add new parameters
        "addr_string" and "addr_string_len".  If not NULL, store
        a copy of the addr_string in the new location as well.
        (get_address_string_location): New function.
        (string_to_event_location): Update call to new_address_location.
        * linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
        Save the event location in the parser's state before
        passing it to convert_address_location_to_sals.
        * breakpoint.c (create_thread_event_breakpoint): Update call
        to new_address_location.
        (init_breakpoint_sal): Get the event location's string, if any,
        and use it to update call to new_address_location.
        * python/py-finishbreakpoint.c (bpfinishpy_init):
        Update call to new_address_location.
        * spu-tdep.c (spu_catch_start): Likewise.

        * config/djgpp/fnchange.lst: Add entries for
        gdb/testsuite/gdb.base/break-fun-addr1.c and
        gdb/testsuite/gdb.base/break-fun-addr2.c.

2016-01-21  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
        is_thumb and set it according to CPSR saved on the stack.
        (arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
        arm_linux_sigreturn_next_pc.

2016-01-20  Simon Marchi  <simon.marchi@polymtl.ca>

        * python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
        Fix enumerators sort key function.

2016-01-20  Joel Brobecker  <brobecker@adacore.com>

        * printcmd.c (print_scalar_formatted): Move binary operator from
        end of line to beginning of next line.  Adjust formatting
        accordingly.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_pid_to_exec_file): Use new "buflen" instead of
        "len" with sysctl.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c (find_stop_signal): Remove.
        (struct fbsd_collect_regset_section_cb) <lwp>: New field.
        <stop_signal>: New field.
        <abort_iteration>: New field.
        (fbsd_collect_regset_section_cb): Use new fields.
        (fbsd_collect_thread_registers): New function.
        (struct fbsd_corefile_thread_data): New structure.
        (fbsd_corefile_thread): New function.
        (fbsd_make_corefile_notes): Use new function to dump notes for each
        non-exited thread in a process.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * configure.ac: Check for support for LWP names on FreeBSD.
        * fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
        [TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
        (fbsd_fetch_kinfo_proc): Move function earlier.
        [PT_LWPINFO] (fbsd_thread_alive): New function.
        [PT_LWPINFO] (fbsd_pid_to_str): New function.
        [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
        [PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
        [PT_LWPINFO] (fbsd_add_threads): New function.
        [PT_LWPINFO] (fbsd_update_thread_list): New function.
        [PT_LWPINFO] New variable super_resume.
        [PT_LWPINFO] (resume_one_thread_cb): New function.
        [PT_LWPINFO] (resume_all_threads_cb): New function.
        [PT_LWPINFO] (fbsd_resume): New function.
        (fbsd_remember_child): Save full ptid instead of plain pid.
        (fbsd_is_child_pending): Return ptid of saved child process.
        (fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
        first stop.
        [PT_LWP_EVENTS] Handle LWP events.
        [TDP_RFPPWAIT] Include LWP in child ptid.
        (fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
        (fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
        Add threads for existing processes.
        (fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
        "fbsd_thread_alive".
        Set "to_pid_to_str" to "fbsd_pid_to_str".
        [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
        "fbsd_thread_name".
        [PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
        Set "to_has_thread_control" to "tc_schedlock".
        Set "to_resume" to "fbsd_resume".
        (_initialize_fbsd_nat): New function.
        * configure: Regenerate.
        * config.in: Regenerate.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
        get_ptrace_pid.
        (amd64bsd_store_inferior_registers): Use get_ptrace_pid.
        (amd64bsd_dr_get): Use get_ptrace_pid.
        (amd64bsd_dr_set): Use get_ptrace_pid.
        * i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid.
        (i386bsd_store_inferior_registers): Use get_ptrace_pid.
        (i386bsd_dr_get): Use get_ptrace_pid.
        (i386bsd_dr_set): Use get_ptrace_pid.
        * inf-ptrace.c (get_ptrace_pid): Export.
        * inf-ptrace.h (get_ptrace_pid): Declare.
        * ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id.
        (ppcfbsd_store_inferior_registers): Use lwp id.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * fbsd_tdep.c (fbsd_core_pid_to_str): New function.
        (fbsd_core_thread_name): New function.
        (fbsd_init_abi): Add "core_pid_to_str" gdbarch method.
        Add "core_thread_name" gdbarch method.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * corelow.c (core_thread_name): New function.
        (init_core_ops): Use "core_thread_name" for the "to_thread_name"
        target op.
        * gdbarch.sh (core_thread_name): New gdbarch callback.
        * gdbarch.h: Re-generate.
        * gdbarch.c: Re-generate.

2016-01-19  Simon Marchi  <simon.marchi@polymtl.ca>

        * python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly
        convert gdb.Value to integer type using int().

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * configure.ac: Include <sys/types.h when checking for "r_fs" in
        "struct reg".
        * configure: Regenerate.

2016-01-19  Pedro Alves  <palves@redhat.com>

        * ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
        * break-catch-throw.c (re_set_exception_catchpoint): Pass the
        current program space down to linespec decoding and breakpoint
        location updating.
        * breakpoint.c (parse_breakpoint_sals): Adjust calls to
        decode_line_full.
        (until_break_command): Adjust calls to decode_line_1.
        (base_breakpoint_decode_location, bkpt_decode_location): Add
        'search_pspace' parameter.  Pass it along.
        (bkpt_probe_create_sals_from_location): Adjust calls to
        parse_probes.
        (tracepoint_decode_location, tracepoint_probe_decode_location)
        (strace_marker_decode_location): Add 'search_pspace' parameter.
        Pass it along.
        (all_locations_are_pending): Rewrite to take a breakpoint and
        program space as arguments instead.
        (hoist_existing_locations): New function.
        (update_breakpoint_locations): Add 'filter_pspace' parameter.  Use
        hoist_existing_locations instead of always removing all locations,
        and adjust to all_locations_are_pending change.
        (location_to_sals): Add 'search_pspace' parameter.  Pass it along.
        Don't disable the breakpoint if there are other locations in
        another program space.
        (breakpoint_re_set_default): Adjust to pass down the current
        program space as filter program space.
        (decode_location_default): Add 'search_pspace' parameter and pass
        it along.
        (prepare_re_set_context): Don't switch program space here.
        (breakpoint_re_set): Use save_current_space_and_thread instead of
        save_current_program_space.
        * breakpoint.h (struct breakpoint_ops) <decode_location>: Add
        'search_pspace' parameter.
        (update_breakpoint_locations): Add 'filter_pspace' parameter.
        * cli/cli-cmds.c (edit_command, list_command): Adjust calls to
        decode_line_1.
        * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
        program space as filter program space.
        * linespec.c (struct linespec_state) <search_pspace>: New field.
        (create_sals_line_offset, convert_explicit_location_to_sals)
        (parse_linespec): Pass the search program space down.
        (linespec_state_constructor): Add 'search_pspace' parameter.
        Store it.
        (linespec_parser_new): Add 'search_pspace' parameter and pass it
        along.
        (linespec_lex_to_end): Adjust.
        (decode_line_full, decode_line_1): Add 'search_pspace' parameter
        and pass it along.
        (decode_line_with_last_displayed): Adjust.
        (collect_symtabs_from_filename, symtabs_from_filename): New
        'search_pspace' parameter.  Use it.
        (find_function_symbols): Pass the search program space down.
        * linespec.h (decode_line_1, decode_line_full): Add
        'search_pspace' parameter.
        * probe.c (parse_probes_in_pspace): New function, factored out
        from ...
        (parse_probes): ... this.  Add 'search_pspace' parameter and use
        it.
        * probe.h (parse_probes): Add pspace' parameter.
        * python/python.c (gdbpy_decode_line): Adjust.
        * tracepoint.c (scope_info): Adjust.

2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
        instruction support.
        (micromips_next_pc): Likewise.
        (micromips_scan_prologue): Likewise.
        (micromips_deal_with_atomic_sequence): Likewise.
        (micromips_stack_frame_destroyed_p): Likewise.
        (mips_breakpoint_from_pc): Likewise.

2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
        unshifted 16-bit microMIPS instruction word to `mips_insn_size'.

2016-01-18  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention that GDB now displays the ID and name of the
        thread that hit a breakpoint or received a signal.
        * break-catch-sig.c (signal_catchpoint_print_it): Use
        maybe_print_thread_hit_breakpoint.
        * break-catch-syscall.c (print_it_catch_syscall): Likewise.
        * break-catch-throw.c (print_it_exception_catchpoint): Likewise.
        * breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
        (print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
        (print_it_catch_exec, print_it_ranged_breakpoint)
        (print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
        Use maybe_print_thread_hit_breakpoint.
        * breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
        * gdbthread.h (show_thread_that_caused_stop): Declare.
        * infrun.c (print_signal_received_reason): Print which thread
        received signal.
        * thread.c (show_thread_that_caused_stop): New function.

2016-01-18  Gary Benson  <gbenson@redhat.com>

        * nat/linux-namespaces.c (do_fork): New function.
        (linux_mntns_get_helper): Use the above.

2016-01-17  Jonas Hahnfeld <Hahnfeld@itc.rwth-aachen.de>  (tiny change)

        Pushed by Joel Brobecker  <brobecker@adacore.com>.
        PR gdb/19208
        * dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
        if the function has no name.

2016-01-15  Sandra Loosemore  <sandra@codesourcery.com>

        * charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
        Conditionalize for Windows host.
        (GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
        (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
        (phony_iconv_open): Handle both UTF-32 endiannesses.
        (phony_iconv): Likewise.  Check for output overflow and clean up
        out-of-input cases.  Correct adjustment to input buffer pointer.
        (set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
        phony_iconv_open.

2016-01-15  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention star wildcard ranges.
        * cli/cli-utils.c (get_number_or_range): Check state->in_range first.
        (number_range_setup_range): New function.
        * cli/cli-utils.h (number_range_setup_range): New declaration.
        * thread.c (thread_apply_command): Support star TID ranges.
        * tid-parse.c (tid_range_parser_finished)
        (tid_range_parser_string, tid_range_parser_skip)
        (get_tid_or_range, get_tid_or_range): Handle
        TID_RANGE_STATE_STAR_RANGE.
        (tid_range_parser_star_range): New function.
        * tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
        New value.
        (tid_range_parser_star_range): New declaration.

2016-01-15  Pedro Alves  <palves@redhat.com>

        * thread.c (thread_apply_command): Use the tid range parser to
        advance past the thread ID list.
        * tid-parse.c (get_positive_number_trailer): New function.
        (parse_thread_id): Use it.
        (get_tid_or_range): Use it.  Return 0 instead of throwing invalid
        thread ID error.
        (get_tid_or_range): Detect negative values.  Return 0 instead of
        throwing invalid thread ID error.

2016-01-14  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
        Declare.
        (arm_linux_get_next_pcs_ops): Install
        arm_linux_get_next_pcs_syscall_next_pc.
        (arm_linux_syscall_next_pc): Change to ...
        (arm_linux_get_next_pcs_syscall_next_pc): ... it.
        (arm_linux_init_abi): Don't set tdep->syscall_next_pc.
        * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
        (arm_get_next_pcs_syscall_next_pc): Make it static.  Don't
        call tdep->syscall_next_pc.
        * arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
        (arm_get_next_pcs_syscall_next_pc): Remove.

2016-01-14  Yao Qi  <yao.qi@linaro.org>

        * remote.c (remote_set_syscall_catchpoint): Cast to char *.
        * thread.c (do_captured_thread_select): Cast to const char *.

2016-01-14  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
        argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
        (thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
        instead.
        * arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
        <arm_thumb2_breakpoint>: Remove.
        <has_thumb2_breakpoint>: New field.
        (arm_get_next_pcs_ctor): Update declaration.
        * arm-linux-tdep.c (arm_linux_software_single_step): Pass
        1 to arm_get_next_pcs_ctor.
        * arm-tdep.c (arm_software_single_step): Pass 0 to
        arm_get_next_pcs_ctor.

2016-01-13  Ulrich Weigand  <uweigand@de.ibm.com>

        * MAINTAINERS: Add Andreas Arnez as s390 target maintainer.

2016-01-13  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
        byte_order_for_code to read instruction.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention $_gthread.
        * gdbthread.h (struct thread_info) <global_num>: Mention
        $_gthread.
        * thread.c (thread_num_make_value_helper): New function.
        (thread_id_make_value): Delete.
        (thread_id_per_inf_num_make_value, global_thread_id_make_value):
        New.
        (thread_funcs): Adjust.
        (gthread_funcs): New.
        (_initialize_thread): Register $_gthread variable.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention "info threads -gid".
        * gdbthread.h (struct thread_info) <global_num>: Mention "info
        threads -gid".
        * thread.c (info_threads_command): Handle "-gid".
        (_initialize_thread): Adjust "info threads" help string to mention
        -gid.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention InferiorThread.global_num.
        * python/py-infthread.c (thpy_get_global_num): New function.
        (thread_object_getset): Register "global_num".

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention that thread IDs are now per inferior and global
        thread IDs.
        * Makefile.in (SFILES): Add tid-parse.c.
        (COMMON_OBS): Add tid-parse.o.
        (HFILES_NO_SRCDIR): Add tid-parse.h.
        * ada-tasks.c: Adjust to use ptid_to_global_thread_id.
        * breakpoint.c (insert_breakpoint_locations)
        (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
        (print_one_breakpoint_location, set_longjmp_breakpoint)
        (check_longjmp_breakpoint_for_call_dummy)
        (set_momentary_breakpoint): Adjust to use global IDs.
        (find_condition_and_thread, watch_command_1): Use parse_thread_id.
        (until_break_command, longjmp_bkpt_dtor)
        (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
        to use global IDs.
        * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
        ptid_to_global_thread_id.
        * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
        * gdbthread.h (struct thread_info): Rename field 'num' to
        'global_num.  Add new fields 'per_inf_num' and 'inf'.
        (thread_id_to_pid): Rename thread_id_to_pid to
        global_thread_id_to_ptid.
        (pid_to_thread_id): Rename to ...
        (ptid_to_global_thread_id): ... this.
        (valid_thread_id): Rename to ...
        (valid_global_thread_id): ... this.
        (find_thread_id): Rename to ...
        (find_thread_global_id): ... this.
        (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
        (print_thread_info): Add comment.
        * tid-parse.h: New file.
        * tid-parse.c: New file.
        * infcmd.c (step_command_fsm_prepare)
        (step_command_fsm_should_stop): Adjust to use the global thread
        ID.
        (until_next_command, until_next_command)
        (finish_command_fsm_should_stop): Adjust to use the global thread
        ID.
        (attach_post_wait): Adjust to check the inferior number too.
        * inferior.h (struct inferior) <highest_thread_num>: New field.
        * infrun.c (handle_signal_stop)
        (insert_exception_resume_breakpoint)
        (insert_exception_resume_from_probe): Adjust to use the global
        thread ID.
        * record-btrace.c (record_btrace_open): Use global thread IDs.
        * remote.c (process_initial_stop_replies): Also consider the
        inferior number.
        * target.c (target_pre_inferior): Clear the inferior's highest
        thread num.
        * thread.c (clear_thread_inferior_resources): Adjust to use the
        global thread ID.
        (new_thread): New inferior parameter.  Adjust to use it.  Set both
        the thread's global ID and the thread's per-inferior ID.
        (add_thread_silent): Adjust.
        (find_thread_global_id): New.
        (find_thread_id): Make static.  Adjust to rename.
        (valid_thread_id): Rename to ...
        (valid_global_thread_id): ... this.
        (pid_to_thread_id): Rename to ...
        (ptid_to_global_thread_id): ... this.
        (thread_id_to_pid): Rename to ...
        (global_thread_id_to_ptid): ... this.  Adjust.
        (first_thread_of_process): Adjust.
        (do_captured_list_thread_ids): Adjust to use global thread IDs.
        (should_print_thread): New function.
        (print_thread_info): Rename to ...
        (print_thread_info_1): ... this, and add new show_global_ids
        parameter.  Handle it.  Iterate over inferiors.
        (print_thread_info): Reimplement as wrapper around
        print_thread_info_1.
        (show_inferior_qualified_tids): New function.
        (print_thread_id): Use it.
        (tp_array_compar): Compare inferior numbers too.
        (thread_apply_command): Use tid_range_parser.
        (do_captured_thread_select): Use parse_thread_id.
        (thread_id_make_value): Adjust.
        (_initialize_thread): Adjust "info threads" help string.
        * varobj.c (struct varobj_root): Update comment.
        (varobj_create): Adjust to use global thread IDs.
        (value_of_root_1): Adjust to use global_thread_id_to_ptid.
        * windows-tdep.c (display_tib): No longer accept an argument.
        * cli/cli-utils.c (get_number_trailer): Make extern.
        * cli/cli-utils.h (get_number_trailer): Declare.
        (get_number_const): Adjust documentation.
        * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
        thread IDs.
        * mi/mi-interp.c (mi_new_thread, mi_thread_exit)
        (mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
        * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
        * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
        Likewise.
        * python/py-breakpoint.c (bppy_set_thread): Likewise.
        * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
        * python/py-infthread.c (thpy_get_num): Add comment and return the
        per-inferior thread ID.
        (thread_object_getset): Update comment of "num".

2016-01-13  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (remove_threaded_breakpoints)
        (print_one_breakpoint_location): Use print_thread_id.
        * btrace.c (btrace_enable, btrace_disable, btrace_teardown)
        (btrace_fetch, btrace_clear): Use print_thread_id.
        * common/print-utils.c (CELLSIZE): Delete.
        (get_cell): Rename to ...
        (get_print_cell): ... this and made extern.  Adjust call callers.
        Adjust to use PRINT_CELL_SIZE.
        * common/print-utils.h (get_print_cell): Declare.
        (PRINT_CELL_SIZE): New.
        * gdbthread.h (print_thread_id): Declare.
        * infcmd.c (signal_command): Use print_thread_id.
        * inferior.c (print_inferior): Use print_thread_id.
        * infrun.c (handle_signal_stop)
        (insert_exception_resume_breakpoint)
        (insert_exception_resume_from_probe)
        (print_signal_received_reason): Use print_thread_id.
        * record-btrace.c (record_btrace_info)
        (record_btrace_resume_thread, record_btrace_cancel_resume)
        (record_btrace_step_thread, record_btrace_wait): Use
        print_thread_id.
        * thread.c (thread_apply_all_command): Use print_thread_id.
        (print_thread_id): New function.
        (thread_apply_command): Use print_thread_id.
        (thread_command, thread_find_command, do_captured_thread_select):
        Use print_thread_id.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention InferiorThread.inferior.
        * python/py-infthread.c (thpy_get_inferior): New.
        (thread_object_getset): Register "inferior".

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention $_inferior.
        * inferior.c (inferior_id_make_value): New.
        (inferior_funcs): New.
        (_initialize_inferior): Create $_inferior variable.

2016-01-13  Pedro Alves  <palves@redhat.com>

        PR breakpoints/19388
        * frame.c (get_current_frame): Use validate_registers_access.
        * gdbthread.h (validate_registers_access): Declare.
        * infrun.c (validate_siginfo_access): Delete.
        (siginfo_value_read, siginfo_value_write): Use
        validate_registers_access.
        * thread.c (validate_registers_access): New function.

2016-01-12  Josh Stone  <jistone@redhat.com>
            Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
        syscall_entry and syscall_return stop reasons.  Mention GDB
        support for remote catch syscall.
        * remote.c (PACKET_QCatchSyscalls): New enum.
        (remote_set_syscall_catchpoint): New function.
        (remote_protocol_features): New element for QCatchSyscalls.
        (remote_parse_stop_reply): Parse syscall_entry/return stops.
        (init_remote_ops): Install remote_set_syscall_catchpoint.
        (_initialize_remote): Config QCatchSyscalls.
        * linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.

2016-01-12  Yao Qi  <yao.qi@linaro.org>

        * nat/linux-ptrace.c (linux_child_function): Cast child_stack
        to gdb_byte * and pass to linux_fork_to_function.

2016-01-12  Yao Qi  <yao.qi@linaro.org>

        * nat/linux-ptrace.c (linux_fork_to_function): Change type
        of argument 'function'.
        (linux_grandchild_function): Change return type to 'int'.
        Change child_stack's type to 'void *'.
        (linux_child_function): Likewise.

2016-01-12  Pedro Alves  <palves@redhat.com>

        Remove use of the registered trademark symbol throughout.

2016-01-12  Thomas Schwinge  <thomas@codesourcery.com>

        * reply_mig_hack.awk: Rewrite one regular expression.

2016-01-11  Mike Frysinger  <vapier@gentoo.org>

        * acinclude.m4: Include new warning.m4 file.
        * configure: Regenerated.
        * configure.ac: Move all warning logic ...
        * warning.m4: ... here.

2016-01-08  Yao Qi  <yao.qi@linaro.org>

        * extension.c: Include target.h.
        (set_active_ext_lang): Only call install_gdb_sigint_handler,
        check_quit_flag, and set_quit_flag if target_terminal_is_ours
        returns false.
        (restore_active_ext_lang): Likewise.
        * target.c (target_terminal_is_ours): New function.
        * target.h (target_terminal_is_ours): Declare.

2016-01-07  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
        to `err' in the little-endian leg.

2016-01-06  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some
        lines below.
        (thumb_get_next_pcs_raw): Make it static.
        (arm_get_next_pcs_raw): Likewise.
        * arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the
        declaration.
        (arm_get_next_pcs_raw): Likewise.

2016-01-05  Mike Frysinger  <vapier@gentoo.org>

        * version.in: Change cvs to git.

2016-01-05  Mike Frysinger  <vapier@gentoo.org>

        * configure.tgt (score-*-*): Delete gdb_sim assignment.

2016-01-05  Pedro Alves  <palves@redhat.com>

        PR sim/13418
        * configure.ac: Define WITH_PPC_SIM when linking in the sim and
        the target is powerpc*.
        * rs6000-tdep.c (init_sim_regno_table): Check WITH_PPC_SIM instead
        of WITH_SIM.
        * configure: Regenerate.
        * config.in: Regenerate.

2016-01-04  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH.

2016-01-02  Mike Frysinger  <vapier@gentoo.org>

        * configure.tgt (powerpc*-*-*): Delete test call and
        always assign gdb_sim.

2016-01-01  Joel Brobecker  <brobecker@adacore.com>

        Update year range in copyright notice of all files.

2016-01-01  Joel Brobecker  <brobecker@adacore.com>

        * top.c (print_gdb_version): Change copyright year in version
        message.

2016-01-01  Joel Brobecker  <brobecker@adacore.com>

        * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.

For older changes see ChangeLog-2015.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: