1 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
3 * valprint.c (generic_val_print): Factor out integer
5 (generic_val_print_int): ... this new function.
7 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
9 * valprint.c (generic_val_print): Factor out bool
11 (generic_val_print_bool): ... this new function.
13 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
15 * valprint.c (generic_val_print): Factor out function/method
17 (generic_val_print_func): ... this new function.
19 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
21 * valprint.c (generic_val_print): Factor out flags
23 (generic_val_print_flags): ... this new function.
25 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
27 * valprint.c (generic_val_print): Factor out enum
29 (generic_val_print_enum): ... this new function.
31 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
33 * valprint.c (generic_val_print): Factor out reference
35 (generic_val_print_ref): ... this new function.
37 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
39 * valprint.c (generic_val_print): Factor out memberptr
41 (generic_val_print_memberptr): ... this new function.
43 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
45 * valprint.c (generic_val_print): Factor out pointer
47 (generic_val_print_ptr): ... this new function.
49 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
51 * valprint.c (generic_val_print): Factor out array
53 (generic_val_print_array): ... this new function.
55 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
57 * valprint.c (generic_val_print): Factor out
58 print_unpacked_pointer code to ...
59 (print_unpacked_pointer): ... this new function.
61 2015-07-27 Patrick Palka <patrick@parcs.ath.cx>
63 * event-top.c (handle_sigterm): Don't inspect
64 target_can_async_p. Always set the quit flag and always mark
65 the async signal handler.
67 2015-07-27 Yao Qi <yao.qi@linaro.org>
69 * Makefile.in (REMOTE_EXAMPLES): Remove it.
71 2015-07-25 Kevin Buettner <kevinb@redhat.com>
73 * remote.c (read_ptid): Return null_ptid when no thread id
75 (remote_current_thread): Add log warning for malformed
77 (remote_start_remote): Add log warning when current thread
80 2015-07-24 Pedro Alves <palves@redhat.com>
82 * s390-linux-nat.c (fetch_regs, store_regs, fetch_fpregs)
83 (s390_stopped_by_watchpoint, s390_prepare_to_resume): Pass 0 as
84 forth argument to ptrace PTRACE_PEEKUSR_AREA/PTRACE_POKEUSR_AREA.
86 2015-07-24 Pedro Alves <palves@redhat.com>
89 * linux-nat.c (linux_nat_filter_event): Don't assert that the lwp
90 is resumed, and extend the debug log.
92 2015-07-24 Pedro Alves <palves@redhat.com>
94 * fork-child.c (fork_inferior): Print argv[0] instead of exec_file.
96 2015-07-24 Pedro Alves <palves@redhat.com>
98 * aarch64-linux-nat.c: Include nat/gdb_ptrace.h instead of
100 * alpha-linux-nat.c: Likewise.
101 * amd64-linux-nat.c: Likewise.
102 * arm-linux-nat.c: Likewise.
103 * hppa-linux-nat.c: Likewise.
104 * i386-linux-nat.c: Likewise.
105 * ia64-linux-nat.c: Likewise.
106 * linux-fork.c: Likewise.
107 * linux-nat.c: Likewise.
108 * m32r-linux-nat.c: Likewise.
109 * m68klinux-nat.c: Likewise.
110 * mips-linux-nat.c: Likewise.
111 * nat/linux-btrace.c: Likewise.
112 * nat/linux-ptrace.c: Likewise.
114 * nat/mips-linux-watch.c: Likewise.
115 * nat/x86-linux-dregs.c: Likewise.
116 * ppc-linux-nat.c: Likewise.
117 * s390-linux-nat.c: Likewise.
118 * spu-linux-nat.c: Likewise.
119 * tilegx-linux-nat.c: Likewise.
120 * x86-linux-nat.c: Likewise.
121 * xtensa-linux-nat.c: Likewise.
123 2015-07-24 Pedro Alves <palves@redhat.com>
125 * ptrace.m4 (ptrace tests): Test in C++ mode. Try with 'enum
126 __ptrace_request as first parameter type instead of int.
127 (PTRACE_TYPE_ARG1): Define.
128 * nat/gdb_ptrace.h [!PTRACE_TYPE_ARG5] (ptrace): Define as wrapper
129 that casts first argument to PTRACE_TYPE_ARG1.
130 * config.in: Regenerate.
131 * configure: Regenerate.
133 2015-07-24 Pedro Alves <palves@redhat.com>
135 * gdb_ptrace.h: Move ...
136 * nat/gdb_ptrace.h: ... here.
137 * inf-ptrace.c: Adjust.
139 2015-07-24 Pedro Alves <palves@redhat.com>
141 * acinclude.m4: Include ptrace.m4.
142 * configure.ac: Call GDB_AC_PTRACE and move ptrace checks ...
143 * ptrace.m4: ... to this new file.
145 2015-07-23 Doug Evans <dje@google.com>
147 * dwarf2read.c (dwarf2_per_cu_data): Add comment.
148 (load_cu): Handle dummy CUs.
149 (dw2_do_instantiate_symtab, process_queuef): Ditto.
150 (dwarf2_fetch_die_loc_sect_off, dwarf2_fetch_constant_bytes): Ditto.
152 2015-07-23 Ciro Santilli <ciro.santilli@gmail.com> (tiny patch)
154 * py-linetable.c (ltpy_get_all_source_lines): Adjust function
155 documentation to say that it returns a list rather than
157 (linetable_object_methods): Update the docstring of the
160 2015-07-23 Pierre-Marie de Rodat <derodat@adacore.com>
162 * gdbtypes.c (resolve_dynamic_array): Pass the peeled element
163 type to the recursive call instead of the original (maybe
164 TYPE_CODE_TYPEDEF) type.
166 2015-07-23 Yao Qi <yao.qi@linaro.org>
168 * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): If
169 TYPE is watchpoint, return zero if aarch64_num_wp_regs is zero.
170 If TYPE is breakpoint, return zero if arch64_num_bp_regs is zero.
172 2015-07-21 Yao Qi <yao.qi@linaro.org>
174 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
175 Move it to nat/aarch64-linux-hw-point.c.
176 (aarch64_linux_child_post_startup_inferior): Update.
177 * nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity):
179 * nat/aarch64-linux-hw-point.h (aarch64_linux_get_debug_reg_capacity):
182 2015-07-21 Markus Metzger <markus.t.metzger@intel.com>
184 * common/btrace-common.c (btrace_data_append): Change case label.
186 2015-07-20 Yao Qi <yao.qi@linaro.org>
188 * nat/aarch64-linux-hw-point.c (aarch64_handle_unaligned_watchpoint):
190 * nat/aarch64-linux-hw-point.h: Use ULONGEST rather than
191 "unsigned long long".
193 2015-07-18 Kevin Buettner <kevinb@redhat.com>
195 * dwarf2read.c (dwarf2_locate_sections): Allow has_section_at_zero
196 to be set for SEC_ALLOC sections too.
198 2015-07-17 Yao Qi <yao.qi@linaro.org>
200 * Makefile.in (HFILES_NO_SRCDIR): Add
201 nat/aarch64-linux-hw-point.h.
202 (aarch64-linux-hw-point.o): New rule.
203 * nat/aarch64-linux-hw-point.h: New file.
204 * nat/aarch64-linux-hw-point.c: New file.
205 * aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h.
206 (AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
207 (AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
208 (AARCH64_HWP_ALIGNMENT): Likewise.
209 (AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
210 (AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
211 (AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
212 (DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
213 (DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
214 (aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
215 (struct aarch64_debug_reg_state): Likewise.
216 (struct arch_lwp_info): Likewise.
217 (aarch64_linux_set_debug_regs): Likewise.
218 (aarch64_notify_debug_reg_change): Remove static.
219 (aarch64_align_watchpoint): Likewise.
220 (DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
221 (aarch64_watchpoint_length): Likewise.
222 (aarch64_point_encode_ctrl_reg): Likewise
223 (aarch64_point_is_aligned): Likewise.
224 (aarch64_dr_state_insert_one_point): Likewise.
225 (aarch64_dr_state_remove_one_point): Likewise.
226 (aarch64_handle_breakpoint): Likewise.
227 (aarch64_handle_aligned_watchpoint): Likewise.
228 (aarch64_handle_unaligned_watchpoint): Likewise.
229 (aarch64_handle_watchpoint): Likewise.
230 * config/aarch64/linux.mh (NAT_FILE): Add
231 aarch64-linux-hw-point.o.
233 2015-07-17 Yao Qi <yao.qi@linaro.org>
235 * aarch64-linux-nat.c (aarch64_handle_breakpoint): Add argument
236 state and don't call aarch64_get_debug_reg_state. All callers
238 (aarch64_linux_insert_hw_breakpoint): Call
239 aarch64_get_debug_reg_state earlier.
240 (aarch64_linux_remove_hw_breakpoint): Likewise.
241 (aarch64_handle_aligned_watchpoint): Add argument state and
242 don't call aarch64_get_debug_reg_state. All callers update.
243 (aarch64_handle_unaligned_watchpoint): Likewise.
244 (aarch64_handle_watchpoint): Add argument state.
245 (aarch64_linux_insert_watchpoint): Call aarch64_get_debug_reg_state
247 (aarch64_linux_remove_watchpoint): Likewise.
249 2015-07-17 Yao Qi <yao.qi@linaro.org>
251 * aarch64-linux-nat.c (aarch64_show_debug_reg_state): Use
253 (aarch64_handle_unaligned_watchpoint): Likewise.
255 2015-07-17 Yao Qi <yao.qi@linaro.org>
257 * aarch64-linux-nat.c (aarch64_dr_state_insert_one_point): Change
258 argument type's type to 'enum target_hw_bp_type'.
259 (aarch64_dr_state_remove_one_point): Likewise.
260 (aarch64_handle_breakpoint): Likewise.
261 (aarch64_linux_insert_hw_breakpoint): Likewise.
262 (aarch64_linux_remove_hw_breakpoint): Likewise.
263 (aarch64_handle_aligned_watchpoint): Likewise.
265 2015-07-17 Yao Qi <yao.qi@linaro.org>
267 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Call
268 ptid_get_pid instead of get_thread_id.
270 2015-07-17 Yao Qi <yao.qi@linaro.org>
272 * remote.c (get_current_thread): Initialise ptid to null_ptid.
273 (add_current_inferior_and_thread): Don't initialise ptid.
275 2015-07-16 Pierre Langlois <pierre.langlois@arm.com>
277 * aarch64-tdep.c (aarch64_pseudo_read_value): Mark S register as
278 unavailable if invalid.
280 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
282 Revert the previous 6 commits:
283 Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
284 Move gdb_regex* to common/
285 Prepare linux_find_memory_regions_full & co. for move
286 Move linux_find_memory_regions_full & co.
287 gdbserver build-id attribute generator
288 Validate symbol file using build-id
290 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
291 Jan Kratochvil <jan.kratochvil@redhat.com>
293 Validate symbol file using build-id.
294 * NEWS (Changes since GDB 7.10): Add 'set validate-build-id'
295 and 'show validate-build-id'. Add build-id attribute.
296 * solib-darwin.c (_initialize_darwin_solib): Assign validate value.
297 * solib-dsbt.c (_initialize_dsbt_solib): Ditto.
298 * solib-frv.c (_initialize_frv_solib): Ditto.
299 * solib-spu.c (set_spu_solib_ops): Ditto.
300 * solib-svr4.c: Include rsp-low.h.
301 (NOTE_GNU_BUILD_ID_NAME): New define.
302 (svr4_validate): New function.
303 (svr4_copy_library_list): Duplicate field build_id.
304 (library_list_start_library): Parse 'build-id' attribute.
305 (svr4_library_attributes): Add 'build-id' attribute.
306 (_initialize_svr4_solib): Assign validate value.
307 * solib-target.c (solib.h): Include.
308 (_initialize_solib_target): Assign validate value.
309 * solib.c (validate_build_id, show_validate_build_id): New.
310 (solib_map_sections): Use ops->validate.
311 (clear_so): Free build_id.
312 (default_solib_validate): New function.
313 (_initialize_solib): Add "validate-build-id".
314 * solib.h (default_solib_validate): New declaration.
315 * solist.h (struct so_list): New fields 'build_idsz' and 'build_id'.
316 (target_so_ops): New field 'validate'.
318 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
319 Jan Kratochvil <jan.kratochvil@redhat.com>
321 gdbserver build-id attribute generator.
322 * features/library-list-svr4.dtd (library-list-svr4): New
323 'build-id' attribute.
325 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
326 Jan Kratochvil <jan.kratochvil@redhat.com>
328 Move linux_find_memory_regions_full & co.
329 * linux-tdep.c (nat/linux-maps.h): Include.
330 (gdb_regex.h): Remove the include.
331 (enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
332 (mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
333 (linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
334 (linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
335 * nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
337 (struct smaps_vmflags, read_mapping, decode_vmflags)
338 (mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
339 (linux_find_memory_regions_full): Move from linux-tdep.c.
340 * nat/linux-maps.h (read_mapping): New declaration.
341 (linux_find_memory_region_ftype, enum filterflags): Moved from
343 (linux_find_memory_regions_full): New declaration.
344 * target.c (target/target-utils.h): Include.
345 (read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
346 (read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
347 definitions to target/target-utils.c.
348 * target.h (target_fileio_read_stralloc): Move it to target/target.h.
349 * target/target-utils.c (read_alloc, read_stralloc): Move definitions
351 * target/target-utils.h (read_alloc_pread_ftype): New typedef.
352 (read_alloc): New declaration.
353 (read_stralloc_func_ftype): New typedef.
354 (read_stralloc): New declaration.
355 * target/target.h (target_fileio_read_stralloc): Move it from target.h.
357 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
358 Jan Kratochvil <jan.kratochvil@redhat.com>
360 Prepare linux_find_memory_regions_full & co. for move.
361 * linux-tdep.c (linux_find_memory_region_ftype): Comment.
362 (linux_find_memory_regions_full): Change signature and prepare
363 for moving to linux-maps.
364 (linux_find_memory_regions_data): Rename field 'obfd' to 'data'.
365 (linux_find_memory_regions_thunk): New.
366 (linux_find_memory_regions_thunk): Use 'data' field instead of 'obfd'.
367 (linux_find_memory_regions_gdb): New.
368 (linux_find_memory_regions): Rename argument 'obfd' to 'func_data'.
369 (linux_make_mappings_corefile_notes): Use
370 linux_find_memory_regions_gdb.
371 * target.c (read_alloc_pread_ftype): New typedef.
372 (target_fileio_read_alloc_1_pread): New function.
373 (read_alloc): Refactor from target_fileio_read_alloc_1.
374 (read_stralloc_func_ftype): New typedef.
375 (target_fileio_read_alloc_1): New implementation. Use read_alloc.
376 (read_stralloc): Refactored from target_fileio_read_stralloc.
377 (target_fileio_read_stralloc): New implementation, use read_stralloc.
379 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
381 * Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
383 (COMMON_OBS): Add gdb_regex.o.
385 * common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
386 --without-included-regex and USE_INCLUDED_REGEX.
387 * common/gdb_regex.c: New file from utils.c functions.
388 * common/gdb_regex.h: Move it here from gdb_regex.h, update include
389 file wrapping define name.
390 * configure: Rebuilt.
391 * configure.ac (gdb_use_included_regex, --without-included-regex)
392 (USE_INCLUDED_REGEX): Move them to common/common.m4.
393 * gdb_regex.h: Move it to common/gdb_regex.h.
394 * utils.c: Remove include gdb_regex.h.
395 (do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
396 (compile_rx_or_error): Move them to common/gdb_regex.c.
398 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
399 Jan Kratochvil <jan.kratochvil@redhat.com>
401 Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
402 * Makefile.in (HFILES_NO_SRCDIR); Add nat/linux-maps.h,
403 common/target-utils.h.
404 (COMMON_OBS): Add target-utils.o.
405 (linux-maps.o, target-utils.o): New.
406 * target/target-utils.c: New file.
407 * target/target-utils.h: New file.
408 * config/i386/linux.mh (NATDEPFILES): Add linux-maps.o.
409 * config/i386/linux64.mh (NATDEPFILES): Ditto.
410 * nat/linux-maps.c: New file.
411 * nat/linux-maps.h: New file.
413 2015-07-15 Markus Metzger <markus.t.metzger@intel.com>
414 Pedro Alves <palves@redhat.com>
416 * nat/linux-btrace.c (perf_event_read): Change the type of DATA_HEAD.
417 (perf_event_read_all): Change the type of SIZE and DATA_HEAD.
418 (perf_event_read_bts): Change the type of SIZE and READ.
419 (linux_enable_bts): Change the type of SIZE, PAGES, DATA_SIZE,
420 and DATA_OFFSET. Move DATA_SIZE declaration. Restrict the buffer size
421 to UINT_MAX. Check for overflows when using DATA_HEAD from the perf
423 (linux_enable_pt): Change the type of PAGES and SIZE. Restrict the
424 buffer size to UINT_MAX.
425 (linux_read_bts): Change the type of BUFFER_SIZE, SIZE, DATA_HEAD, and
427 * nat/linux-btrace.h (struct perf_event_buffer)<size, data_head>
428 <last_head>: Change type.
429 * common/btrace-common.h (struct btrace_dat_pt) <size>: Change type.
430 * common/btrace-common.c (btrace_data_append): Change the type of
432 * btrace.c (parse_xml_raw): Change the type of SIZE. Change oddness
435 2015-07-14 Simon Marchi <simon.marchi@ericsson.com>
437 * gdbtypes.h (CHECK_TYPEDEF): Remove.
438 * aarch64-tdep.c (aarch64_return_in_memory): Replace CHECK_TYPEDEF
440 * ada-lang.c (decode_constrained_packed_array_type): Likewise.
441 (ada_array_length): Likewise.
442 (find_parallel_type_by_descriptive_type): Likewise.
443 (ada_check_typedef): Likewise.
444 * arm-tdep.c (arm_return_in_memory): Likewise.
445 * ax-gdb.c (gen_trace_static_fields): Likewise.
446 (gen_struct_ref_recursive): Likewise.
447 * c-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
448 (variable: block COLONCOLON name): Likewise.
449 (qualified_name: TYPENAME COLONCOLON name): Likewise.
450 * c-lang.c (classify_type): Likewise.
451 * c-typeprint.c (c_print_type): Likewise.
452 (c_print_typedef): Likewise.
453 (c_type_print_base): Likewise.
454 * c-valprint.c (c_val_print): Likewise.
455 * compile/compile-c-types.c (convert_type): Likewise.
456 * compile/compile-object-load.c (get_out_value_type): Likewise.
457 * completer.c (add_struct_fields): Likewise.
458 (expression_completer): Likewise.
459 * cp-namespace.c (cp_find_type_baseclass_by_name): Likewise.
460 (cp_lookup_nested_symbol_1): Likewise.
461 (cp_lookup_nested_symbol): Likewise.
462 * cp-valprint.c (cp_print_value_fields): Likewise.
463 (cp_print_static_field): Likewise.
464 * d-valprint.c (d_val_print): Likewise.
465 * eval.c (evaluate_subexp_standard): Likewise.
466 (evaluate_subexp_for_sizeof): Likewise.
467 * f-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
468 * f-typeprint.c (f_type_print_base): Likewise.
469 * f-valprint.c (f_val_print): Likewise.
470 * gdbtypes.c (get_discrete_bounds): Likewise.
471 (create_array_type_with_stride): Likewise.
472 (type_name_no_tag_or_error): Likewise.
473 (lookup_struct_elt_type): Likewise.
474 (get_unsigned_type_max): Likewise.
475 (internal_type_vptr_fieldno): Likewise.
476 (set_type_vptr_fieldno): Likewise.
477 (internal_type_vptr_basetype): Likewise.
478 (set_type_vptr_basetype): Likewise.
479 (get_vptr_fieldno): Likewise.
480 (is_integral_type): Likewise.
481 (is_scalar_type): Likewise.
482 (is_scalar_type_recursive): Likewise.
483 (distance_to_ancestor): Likewise.
484 (is_unique_ancestor_worker): Likewise.
485 (check_types_equal): Likewise.
486 * gnu-v2-abi.c (gnuv2_value_rtti_type): Likewise.
488 2015-07-14 Iain Buclaw <ibuclaw@gdcproject.org>
490 * dwarf2read.c (find_slot_in_mapped_hash): Extend language support to
491 also test for language_d.
492 (dwarf2_compute_name): Likewise.
493 (read_func_scope): Likewise.
494 (read_structure_type): Likewise.
495 (new_symbol_full): Likewise.
496 (determine_prefix): Likewise.
497 (read_import_statement): Use dot as the separator for language_d.
498 (typename_concat): Likewise, but don't prefix the D main function.
500 2015-07-14 Peter Bergner <bergner@vnet.ibm.com>
502 * nat/linux-namespaces.c (setns): Rename from this ...
503 (do_setns): ... to this. Support calling setns if it exists.
504 (mnsh_handle_setns): Call do_setns.
506 2015-07-13 Yao Qi <yao.qi@linaro.org>
508 * exec.c (exec_file_attach): Add period at the end of error
511 2015-07-13 Andrew Burgess <andrew.burgess@embecosm.com>
513 * tui/tui-win.c (window_name_completer): New function.
514 (focus_completer): Call window_name_completer. All old content
515 moved into window_name_completer.
516 (winheight_completer): New function.
517 (_initialize_tui_win): Rename variable. Add completer to
518 winheight command. Update doc string on winheight.
520 2015-07-12 Sandra Loosemore <sandra@codesourcery.com>
522 * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Register
523 all nios2 mach variants.
525 2015-07-10 Kevin Buettner <kevinb@redhat.com>
527 * rx-tdep.c (rx_get_opcode_byte): Use target_read_code instead
528 of target_read_memory.
530 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
532 * tui/tui-win.c (tui_set_win_height): Use a cleanup to free the
534 (parse_scrolling_args): Likewise.
536 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
538 * tui/tui-win.c (focus_completer): Don't duplicate the tui window
539 names in this function.
541 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
543 * tui/tui-data.h (SRC_NAME): Convert to lower case.
544 (CMD_NAME): Likewise.
545 (DATA_NAME): Likewise.
546 (DISASSEM_NAME): Likewise.
547 * tui/tui-win.c (tui_set_focus): Window names are now lower case.
548 (tui_set_win_height): Likewise.
549 (parse_scrolling_args): Likewise.
551 2015-07-10 Markus Metzger <markus.t.metzger@intel.com>
553 * record-btrace.c (record_btrace_goto_begin)
554 (record_btrace_goto_end, record_btrace_goto): Move call to
555 print_stack_frame ...
556 (record_btrace_set_replay): ... here. Set stop_pc.
557 * record-full.c (record_full_goto_entry): Set stop_pc.
559 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
561 * NEWS: Mention support for tracepoints on aarch64-linux.
563 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
565 * linux-aarch64-low.c (aarch64_supports_tracepoints): New
567 (the_low_target): Install it.
569 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
571 * gdb.trace/backtrace.exp: Set registers for aarch64 target.
572 * gdb.trace/collection.exp: Likewise.
573 * gdb.trace/mi-trace-frame-collected.exp: Likewise.
574 * gdb.trace/mi-trace-unavailable.exp: Likewise.
575 * gdb.trace/report.exp: Likewise.
576 * gdb.trace/trace-break.exp: Likewise.
577 * gdb.trace/unavailable.exp: Likewise.
578 * gdb.trace/while-dyn.exp: Likewise.
580 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
582 * aarch64-tdep.c: Add ax.h and ax-gdb.h includes.
583 (aarch64_gen_return_address): New function.
584 (aarch64_gdbarch_init): Hook it.
586 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
588 * aarch64-tdep.c (aarch64_make_stub_cache): Set available_p and
589 swallow NOT_AVAILABLE_ERROR.
590 (aarch64_stub_this_id): Call frame_id_build_unavailable_stack if
591 available_p is not set.
592 (aarch64_stub_frame_unwind_stop_reason): New function.
593 (aarch64_stub_unwind): Install it.
595 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
597 * aarch64-tdep.c (aarch64_prologue_cache) <available_p>: New
599 (aarch64_make_prologue_cache_1): New function, factored out from
600 aarch64_make_prologue_cache. Do not allocate cache. Set
602 (aarch64_make_prologue_cache): Reimplement wrapping
603 aarch64_make_prologue_cache_1, and swallowing
605 (aarch64_prologue_frame_unwind_stop_reason): New function.
606 Return UNWIND_UNAVAILABLE if available_p is not set.
607 (aarch64_prologue_unwind): Install it.
608 (aarch64_prologue_this_id): Move prev_pc and prev_sp limit
609 checks into aarch64_prologue_frame_unwind_stop_reason. Call
610 frame_id_build_unavailable_stack if available_p is not set.
612 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
614 * aarch64-tdep.c (aarch64_prologue_cache) <func, prev_pc>: New
616 (aarch64_scan_prologue): Set prev_pc.
617 (aarch64_make_prologue_cache): Set func.
618 (aarch64_make_stub_cache): Set prev_pc.
619 (aarch64_prologue_this_id): Remove local variables id, pc and
620 func. Read prev_pc and func from cache.
621 (aarch64_stub_this_id): Read prev_pc from cache.
623 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
625 * aarch64-tdep.c (aarch64_make_stub_cache): Update comment. New
626 argument this_cache. Remove unused local variables reg and
627 unwound_fp. Return early if this_cache is already set. Set
629 (aarch64_stub_this_id): Update call to aarch64_make_stub_cache.
631 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
633 * aarch64-tdep.c (aarch64_make_prologue_cache): Update comment.
634 New argument this_cache. Return early if this_cache is already
636 (aarch64_prologue_this_id): Update call to
637 aarch64_make_prologue_cache.
638 (aarch64_prologue_prev_register): Likewise.
639 (aarch64_normal_frame_base): Likewise.
641 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
643 * c-valprint.c (c_val_print): Factor out memberptr printing code
644 from c_val_print to ...
645 (c_val_print_memberptr): ... this new function.
647 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
649 * c-valprint.c (c_val_print): Factor out int printing code to ...
650 (c_val_print_int): ... this new function.
652 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
654 * c-valprint.c (c_val_print): Factor out struct and union
656 (c_val_print_struct): ... this new function ...
657 (c_val_print_union): ... and this new function.
659 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
661 * c-valprint.c (c_val_print): Factor out pointer printing code
663 (c_val_print_ptr): ... this new function.
665 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
667 * c-valprint.c (c_valprint): Factor our array printing code from
669 (c_val_print_array): ... this new function.
671 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
673 * c-valprint.c (c_val_print): Factor out pointer printing code
675 (print_unpacked_pointer): ... this new function.
677 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
679 * c-valprint.c (c_val_print): Remove an assignment to i and move
682 2015-07-09 Yao Qi <yao.qi@linaro.org>
684 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Add
685 argument ptid. Update comments. Caller update.
687 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
689 * btrace.c (pt_print_packet): Print stop, vmcs, tma, mtc, cyc, and
692 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
694 * btrace.c (btrace_pt_readmem_callback): Change type of PC argument.
696 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
698 * progspace.c (delete_program_space): Add missing spaces.
700 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
702 * inferior.c (delete_inferior_1): Rename to ...
703 (delete_inferior): ..., remove 'silent' parameter, delete
704 program space when unused and remove call to prune_program_spaces.
705 Remove the old, unused, delete_inferior.
706 (delete_inferior_silent): Remove.
707 (prune_inferiors): Change call from delete_inferior_1 to
708 delete_inferior and remove 'silent' parameter. Remove call to
709 prune_program_spaces.
710 (remove_inferior_command): Idem.
711 * inferior.h (delete_inferior_1): Rename to...
712 (delete_inferior): ..., remove 'silent' parameter and remove the
713 original delete_inferior.
714 (delete_inferior_silent): Remove.
715 * mi/mi-main.c (mi_cmd_remove_inferior): Change call from
716 delete_inferior_1 to delete_inferior and remove 'silent'
718 * progspace.c (prune_program_spaces): Remove.
719 (pspace_empty_p): Rename to...
720 (program_space_empty_p): ... and make non-static.
721 (delete_program_space): New.
722 * progspace.h (prune_program_spaces): Remove declaration.
723 (program_space_empty_p): New declaration.
724 (delete_program_space): New declaration.
725 * monitor.c (monitor_close): Replace call to
726 delete_thread_silent and delete_inferior_silent with
727 discard_all_inferiors.
729 2015-07-08 Patrick Palka <patrick@parcs.ath.cx>
731 * defs.h (deprecated_register_changed_hook): Remove prototype.
732 * interps.c (clear_iterpreter_hooks): Remove reference to
733 deprecated_register_changed_hook.
734 * top.c (deprecated_register_changed_hook): Remove prototype.
735 * valops.c (value_assign): Remove reference to
736 deprecated_register_changed_hook.
737 * tui/tui-hooks.c (tui_register_changed): Add parameter "frame".
738 Add comment documenting the function.
739 (tui_register_changed_observer): Define.
740 (tui_install_hooks): Remove reference to
741 deprecated_register_changed_hook. Set
742 tui_register_changed_observer.
743 (tui_remove_hooks): Remove reference to
744 deprecated_register_changed_hook. Unset
745 tui_register_changed_observer.
747 2015-07-08 Jan Kratochvil <jan.kratochvil@redhat.com>
750 * compile/compile-c-types.c (insert_type): Change gdb_assert to error.
752 2015-07-08 Robert O'Callahan <robert@ocallahan.org>
755 * ax-gdb.c (gen_conversion): Extend to 'to' bits, not 'from'.
757 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
759 * MAINTAINERS (Write After Approval): Add Markus T. Metzger.
761 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
763 * nat/linux-btrace.c (kernel_supports_bts, kernel_supports_pt):
764 Use safe_strerror() instead of strerror().
766 2015-07-07 Yao Qi <yao.qi@linaro.org>
768 * features/arm-with-m-fpa-layout.xml: Set architecture to arm.
769 * features/arm-with-m-fpa-layout.c: Regenerated.
770 * features/arm-with-m-vfp-d16.xml: Likewise.
771 * features/arm-with-m-vfp-d16.c: Regenerated.
772 * features/arm-with-m.xml: Likewise.
773 * features/arm-with-m.c: Regenerated.
774 * features/arm-with-neon.xml: Likewise.
775 * features/arm-with-neon.c: Regenerated.
776 * features/arm-with-vfpv2.xml: Likewise.
777 * features/arm-with-vfpv2.c: Regenerated.
778 * features/arm-with-vfpv3.xml: Likewise.
779 * features/arm-with-vfpv3.c: Regenerated.
781 2015-07-07 Yao Qi <yao.qi@linaro.org>
783 * aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
785 * aarch64-linux-nat.c: Include aarch32-linux-nat.h and
787 (fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
789 (store_gregs_to_thread): Call aarch32_gp_regcache_collect
791 (fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
793 (store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
795 (tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
796 (aarch64_linux_read_description): Return the right target
798 * arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
799 * config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
800 * configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
803 2015-07-07 Yao Qi <yao.qi@linaro.org>
805 * aarch32-linux-nat.c: New file.
806 * aarch32-linux-nat.h: New file.
807 * arm-linux-nat.c: Include aarch32-linux-nat.h.
808 (fetch_regs): Move code to aarch32-linux-nat.c. Call
809 aarch32_gp_regcache_supply.
810 (store_regs): Move code to aarch32-linux-nat.c. Call
811 aarch32_gp_regcache_collect.
812 (fetch_vfp_regs): Move code to aarch32-linux-nat.c. Call
813 aarch32_vfp_regcache_supply.
814 (store_vfp_regs): Move code to aarch32-linux-nat.c. Call
815 aarch32_vfp_regcache_collect.
816 * config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
818 2015-07-07 Yao Qi <yao.qi@linaro.org>
820 * arm-linux-nat.c (store_fpregister): Remove.
821 (store_register): Likewise.
822 (fetch_fpregister): Likewise.
823 (fetch_register): Likewise.
824 (arm_linux_store_inferior_registers): Call store_regs and
825 store_fpregs instead.
826 (arm_linux_fetch_inferior_registers): Call fetch_fpregs and
829 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
831 * doc/gdb.texinfo (TUI): Restructure documentation on TUI layout
834 2015-07-06 Joel Brobecker <brobecker@adacore.com>
836 * NEWS: Create a new section for the next release branch.
837 Rename the section of the current branch, now that it has
840 2015-07-06 Joel Brobecker <brobecker@adacore.com>
842 GDB 7.10 branch created (66c4b3e8a628a207bc6aafef6af0c4128195f56e):
843 * version.in: Bump version to 7.10.50.DATE-cvs.
845 2015-07-06 Luis Machado <lgustavo@codesourcery.com>
847 * breakpoint.c (remove_breakpoint_1): Don't handle permanent
848 breakpoints in a special way.
849 (remove_breakpoint): Likewise.
850 (mark_breakpoints_out): Likewise.
852 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
854 * doc/gdb.texinfo (TUI): Add comma after @xref.
856 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
858 * tui/tui-win.c (tui_set_focus): Use structure member 'generic'
859 instead of casting the structure type.
861 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
863 * valops.c (search_struct_field): Remove OFFSET parameter.
864 (value_cast_structs): Adjust calls to search_struct_field.
865 (value_struct_elt): Same.
866 (find_overload_match): Same.
868 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
870 * value.c (value_fetch_lazy): Update comment, change return
872 * value.h (value_fetch_lazy): Change return value to void.
874 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
876 * tui/tui-data.c (tui_partial_win_by_name): Window name is const.
877 (tui_win_name): Make parameter and result const.
878 * tui/tui-data.h (tui_win_name): Make parameter and result const.
880 2015-07-06 Patrick Palka <patrick@parcs.ath.cx>
882 * i386-tdep.c (i386_mpx_info_bounds): Don't call error, instead
883 use printf_unfiltered.
884 (set_mpx_cmd): Add missing trailing space to command string
886 (_initialize_i386_tdep): Give the "mpx" prefix command its
889 2015-07-02 Kevin Buettner <kevinb@redhat.com>
891 * rx-tdep.c (RX_USP_REGNUM, RX_BPC_REGNUM): New constants.
892 (enum rx_frame_type): New.
893 (struct rx_prologue): Add new field `frame_type'.
894 (rx_analyze_prologue): Add `frame_type' parameter. Cache this
895 parameter in the prologue struct. Add code for recording
896 locations of PC and PSW for fast interrupt and exception frames.
897 (rx_skip_prologue): Adjust call to rx_analyze_prologue.
898 (rx_analyze_frame_prologue): Add `frame_type' parameter.
899 (rx_frame_type): New function.
900 (rx_frame_base): Fetch frame type and pass it to rx_analyze_prologue.
901 (rx_frame_this_id): Rename parameter `this_prologue_cache' to
903 (rx_frame_prev_register): Rename parameter `this_prologue_cache' to
904 `this_cache'. Add cases for RX_FRAME_TYPE_EXCEPTION and
905 RX_FRAME_TYPE_FAST_INTERRUPT.
906 (normal_frame_p, exception_frame_p, rx_frame_sniffer_common)
907 (rx_frame_sniffer, rx_exception_sniffer): New functions.
908 (rx_frame_unwind): Use rx_frame_sniffer instead of
909 default_frame_sniffer.
910 (rx_frame_unwind): New unwinder.
911 (rx_gdbarch_init): Register new unwinder.
913 2015-07-02 Kevin Buettner <kevinb@redhat.com>
915 * rx-tdep.c (RX_BPSW_REGNUM, RX_FPSW_REGNUM): New constants.
916 (struct gdbarch_tdep): Add fields rx_psw_type and rx_fpsw_type.
917 (rx_register_type): Add cases for RX_PSW_REGNUM, RX_BPSW_REGNUM,
919 (rx_gdbarch_init): Initialize PSW, BPSW, and FPSW flags types.
921 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
923 Fix GCC false warning.
924 * s390-linux-tdep.c (s390_handle_arg): Initialize VAL.
926 2015-07-02 Yao Qi <yao.qi@linaro.org>
928 * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix
929 typo in the debugging message.
931 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
933 * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h.
934 (maint_btrace_cmdlist, maint_btrace_set_cmdlist)
935 (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist)
936 (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad)
937 (btrace_maint_clear): New.
938 (btrace_fetch, btrace_clear): Call btrace_maint_clear.
939 (pt_print_packet, btrace_maint_decode_pt)
940 (btrace_maint_update_pt_packets, btrace_maint_update_packets)
941 (btrace_maint_print_packets, get_uint, get_context_size, no_chunk)
942 (maint_btrace_packet_history_cmd)
943 (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd)
944 (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd)
945 (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd)
946 (maint_info_btrace_cmd, _initialize_btrace): New.
947 * btrace.h (btrace_pt_packet, btrace_pt_packet_s)
948 (btrace_maint_packet_history, btrace_maint_info): New.
949 (btrace_thread_info) <maint>: New.
952 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
954 * btrace.c (btrace_fetch): Append the new trace data.
955 (btrace_clear): Clear the stored trace data.
956 * btrace.h (btrace_thread_info) <data>: New.
957 * common/btrace-common.h (btrace_data_clear)
958 (btrace_data_append): New.
959 * common/btrace-common.c (btrace_data_clear)
960 (btrace_data_append): New.
962 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
964 * nat/linux-btrace.c (linux_enable_bts): Check for
966 Check for data_offset and data_size fields. Use them.
968 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
970 * NEWS: Announce new commands "record btrace pt" and "record pt".
971 Announce new options "set|show record btrace pt buffer-size".
972 * btrace.c: Include "rsp-low.h".
973 Include "inttypes.h".
974 (btrace_add_pc): Add forward declaration.
975 (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
976 (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
977 (btrace_compute_ftrace_pt): New.
978 (btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
979 (check_xml_btrace_version): Update version check.
980 (parse_xml_raw, parse_xml_btrace_pt_config_cpu)
981 (parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
982 (btrace_pt_config_cpu_attributes, btrace_pt_config_children)
983 (btrace_pt_children): New.
984 (btrace_children): Add support for "pt".
985 (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
986 (btrace_conf_children): Add support for "pt".
987 * btrace.h: Include "intel-pt.h".
988 (btrace_pt_error): New.
989 * common/btrace-common.c (btrace_format_string, btrace_data_fini)
990 (btrace_data_empty): Support BTRACE_FORMAT_PT.
991 * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
992 (struct btrace_config_pt): New.
993 (struct btrace_config)<pt>: New.
994 (struct btrace_data_pt_config, struct btrace_data_pt): New.
995 (struct btrace_data)<pt>: New.
996 * features/btrace-conf.dtd (btrace-conf)<pt>: New.
998 * features/btrace.dtd (btrace)<pt>: New.
999 (pt, pt-config, cpu): New.
1000 * nat/linux-btrace.c (perf_event_read, perf_event_read_all)
1001 (perf_event_pt_event_type, kernel_supports_pt)
1002 (linux_supports_pt): New.
1003 (linux_supports_btrace): Support BTRACE_FORMAT_PT.
1004 (linux_enable_bts): Free tinfo on error.
1005 (linux_enable_pt): New.
1006 (linux_enable_btrace): Support BTRACE_FORMAT_PT.
1007 (linux_disable_pt): New.
1008 (linux_disable_btrace): Support BTRACE_FORMAT_PT.
1009 (linux_fill_btrace_pt_config, linux_read_pt): New.
1010 (linux_read_btrace): Support BTRACE_FORMAT_PT.
1011 * nat/linux-btrace.h (struct btrace_tinfo_pt): New.
1012 (struct btrace_target_info)<pt>: New.
1013 * record-btrace.c (set_record_btrace_pt_cmdlist)
1014 (show_record_btrace_pt_cmdlist): New.
1015 (record_btrace_print_pt_conf): New.
1016 (record_btrace_print_conf): Support BTRACE_FORMAT_PT.
1017 (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
1018 (cmd_record_btrace_pt_start): New.
1019 (cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
1020 (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
1021 (_initialize_record_btrace): Add new commands.
1022 * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
1023 (remote_protocol_features): Add "Qbtrace:pt".
1024 Add "Qbtrace-conf:pt:size".
1025 (remote_supports_btrace): Support BTRACE_FORMAT_PT.
1026 (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
1027 (remote_enable_btrace): Support BTRACE_FORMAT_PT.
1028 (_initialize_remote): Add new commands.
1030 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
1032 * configure.ac: check for libipt
1033 * configure: Regenerate.
1034 * config.in: Regenerate.
1035 * Makefile.in (LIBIPT): New.
1036 (CLIBS): Add $LIBIPT.
1037 * NEWS: document new configure options
1039 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1041 * compile/compile-object-load.c (compile_object_load): Replace debug
1042 message "lookup undefined ELF symbol" by 3 more specific messages.
1044 2015-07-01 Kevin Buettner <kevinb@redhat.com>
1046 * rl78-tdep.c (struct gdbarch_tdep): Add new field, rl78_psw_type.
1047 (rl78_register_type): Add case for RL78_PSW_REGNUM.
1048 (rl78_gdbarch_init): Initialize rl78_psw_type.
1050 2015-07-01 Patrick Palka <patrick@parcs.ath.cx>
1052 * tui/tui-hooks.c (tui_refresh_frame_and_register_information):
1053 Update commentary. Always refresh the registers when frame
1054 information has changed.
1055 * tui/tui-stack.c (tui_show_frame_info): Update commentary.
1056 Change return type to int. Return 1 if frame information has
1057 changed, 0 otherwise.
1058 (tui_before_prompt): Update commentary.
1059 * tui/tui-stack.h (tui_show_frame_info): Change return type to
1062 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
1065 * frame.c (select_frame): Remove reference to
1066 deprecated_selected_frame_level_changed_hook.
1067 * frame.h (deprecated_selected_frame_level_changed_hook): Remove
1069 * stack.c (deprecated_selected_frame_level_changed_hook):
1071 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
1073 (tui_refresh_frame_and_register_information): ... this. Bail
1074 out if there is no stack. Don't update register information
1075 unless registers_too_p is true.
1076 (tui_print_frame_info_listing_hook): Rename to ...
1077 (tui_dummy_print_frame_info_listing_hook): ... this.
1078 (tui_before_prompt): New function.
1079 (tui_normal_stop): New function.
1080 (tui_before_prompt_observer): New observer.
1081 (tui_normal_stop_observer): New observer.
1082 (tui_install_hooks): Set
1083 deprecated_print_frame_info_listing_hook to
1084 tui_dummy_print_frame_info_listing_hook. Register
1085 tui_before_prompt_observer to call tui_before_prompt and
1086 tui_normal_stop_observer to call tui_normal_stop. Remove
1087 reference to deprecated_selected_frame_level_changed_hook.
1088 (tui_remove_hooks): Detach and unset tui_before_prompt_observer
1089 and tui_normal_stop_observer. Remove reference to
1090 deprecated_selected_frame_level_changed_hook.
1092 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
1095 * tui/tui-stack.c (tui_set_locator_info): Change prototype to
1096 return an int instead of void. Return whether the locator
1098 (tui_show_frame_info): If the locator info has not changed, then
1099 bail out early to avoid refreshing the windows.
1101 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
1103 * tui/tui-stack.c (tui_set_locator_info): Explicitly pass
1104 LOCATOR_WIN to tui_alloc_content.
1106 2015-06-30 Yao Qi <yao.qi@linaro.org>
1109 * arm-tdep.c (arm_get_next_pc_raw): Break for media
1112 2015-06-29 Kevin Buettner <kevinb@redhat.com>
1114 * rx-tdep.c (RX_PSW_REGNUM): New enum constant.
1115 (rx_dwarf_reg_to_regnum): New function.
1116 (rx_gdbarch_init): Register rx_dwarf_reg_to_regnum. Use dwarf2
1119 2015-06-29 Pedro Alves <palves@redhat.com>
1122 * infcall.c (run_inferior_call): On infcall success, if the thread
1123 was marked stopped before, reset it back to stopped.
1124 * infrun.c (resume): Don't suppress the set_running calls when
1126 (normal_stop): Only discard the finish_thread_state cleanup if the
1129 2015-06-29 Pierre Langlois <pierre.langlois@arm.com>
1131 * MAINTAINERS (Write After Approval): Update my email address.
1133 2015-06-26 Keith Seitz <keiths@redhat.com>
1134 Doug Evans <dje@google.com>
1137 * block.c (block_lookup_symbol): For non-function blocks,
1138 continue to search for a symbol with an exact domain match
1139 Otherwise, return any previously found "best domain" symbol.
1140 (block_lookup_symbol_primary): Likewise.
1142 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
1144 * NEWS: Mention the new option "history remove-duplicates".
1145 * top.c (history_remove_duplicates): New static variable.
1146 (show_history_remove_duplicates): New static function.
1147 (gdb_add_history): Conditionally remove duplicate history
1149 (init_main): Add "history remove-duplicates" option.
1151 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
1153 * tui/tui-win.c (focus_completer): New static function.
1154 (_initialize_tui_win): Set the completion function of the
1155 "focus" command to focus_completer.
1157 2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1159 * linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
1161 * symtab.c (find_function_start_sal): Likewise.
1163 2015-06-25 Gary Benson <gbenson@redhat.com>
1165 * solib.c (solib_find_1): Set local variable sysroot to NULL if
1166 it is the empty string after trailing slashes have been stripped.
1168 2015-06-25 Gary Benson <gbenson@redhat.com>
1170 * exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
1171 * infrun.c (follow_exec): Likewise.
1172 * remote.c (remote_filesystem_is_local): Likewise.
1173 * solib.c (solib_find_1): Likewise.
1175 2015-06-24 Keith Seitz <keiths@redhat.com>
1177 * build-id.c (build_id_to_debug_bfd): Add cleanup to free
1178 return value from lrealpath.
1180 2015-06-24 Mike Frysinger <vapier@gentoo.org>
1182 * remote-sim.c (gdbsim_open): Move sysroot update to the top.
1184 2015-06-24 Mike Frysinger <vapier@gentoo.org>
1186 * remote-sim.c: Include gdb_bfd.h.
1187 (gdbsim_open): Declare new local sysroot pointing to gdb_sysroot.
1188 Skip TARGET_SYSROOT_PREFIX in gdb_sysroot when it is active.
1190 2015-06-24 Yao Qi <yao.qi@linaro.org>
1192 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
1193 set_gdbarch_get_siginfo_type.
1194 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
1195 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
1196 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
1197 * m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
1198 * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
1199 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1200 * tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
1201 * linux-tdep.c (linux_get_siginfo_type): Change it to static.
1202 (linux_init_abi): Call set_gdbarch_get_siginfo_type.
1203 * linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
1205 2015-06-24 Gary Benson <gbenson@redhat.com>
1207 * common/buffer.c (stdint.h): Do not include.
1208 * common/print-utils.c (stdint.h): Likewise.
1209 * compile/compile-c-symbols.c (gdb_assert.h): Likewise.
1210 * compile/compile-c-types.c (gdb_assert.h): Likewise.
1211 * ft32-tdep.c (gdb_assert.h): Likewise.
1212 * guile/scm-utils.c (stdint.h): Likewise.
1213 * i386-linux-tdep.c (stdint.h): Likewise.
1214 * i386-tdep.c (stdint.h): Likewise.
1215 * nat/linux-btrace.c (stdint.h): Likewise.
1216 * nat/linux-btrace.h (stdint.h): Likewise.
1217 * nat/linux-ptrace.c (stdint.h): Likewise.
1218 * nat/mips-linux-watch.h (stdint.h): Likewise.
1219 * ppc-linux-nat.c (stdint.h): Likewise.
1220 * python/python-internal.h (stdint.h): Likewise.
1221 * stub-termcap.c (stdlib.h): Likewise.
1222 * target/target.h (stdint.h): Likewise.
1223 * xtensa-linux-nat.c (stdint.h): Likewise.
1225 2015-06-23 Patrick Palka <patrick@parcs.ath.cx>
1227 * top.c (init_history): Look at errno after calling strtol to
1228 properly map large GDBHISTSIZE values to infinity.
1230 2015-06-23 Doug Evans <dje@google.com>
1232 * inferior.h (struct inferior_suspend_state): Delete, unused.
1233 All references deleted.
1235 2015-06-23 Mike Frysinger <vapier@gentoo.org>
1237 * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
1238 (microblaze_push_dummy_call): Likewise.
1239 (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
1240 and set_gdbarch_push_dummy_call.
1242 2015-06-23 Yao Qi <yao.qi@linaro.org>
1244 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
1245 Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
1246 (amd64_linux_store_inferior_registers): Likewise.
1247 * arm-linux-nat.c (fetch_fpregister): Likewise.
1248 (fetch_fpregs, store_fpregister): Likewise.
1249 (store_fpregister, store_fpregs): Likewise.
1250 (fetch_register, fetch_regs): Likewise.
1251 (store_register, store_regs): Likewise.
1252 (fetch_vfp_regs, store_vfp_regs): Likewise.
1253 (arm_linux_read_description): Check have_ptrace_getregset is
1254 TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
1256 * i386-linux-nat.c (fetch_xstateregs): Check
1257 have_ptrace_getregset is not TRIBOOL_TRUE.
1258 (store_xstateregs): Likewise.
1259 * linux-nat.c (have_ptrace_getregset): Change its type to
1261 * linux-nat.h (tribool): New enum.
1262 * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
1263 Check whether have_ptrace_getregset is TRIBOOL_TRUE.
1265 2015-06-19 Doug Evans <dje@google.com>
1267 * NEWS: Mention Sun's version of stabs is no longer supported.
1268 * elfread.c (free_elfinfo): Delete. All uses updated.
1269 (elfstab_offset_sections): Delete. All uses updated.
1270 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
1271 * psympriv.h (partial_symtab) <section_offsets>: Delete.
1273 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
1274 All callers updated.
1276 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
1278 * common/rsp-low.c (needs_escaping): New.
1279 (remote_escape_output): Add unit_size parameter. Refactor to
1280 support multi-byte addressable units. Rename parameters.
1281 * common/rsp-low.h (remote_escape_output): Add unit_size
1282 parameter and rename others. Update doc.
1283 * remote.c (align_for_efficient_write): New.
1284 (remote_write_bytes_aux): Add unit_size parameter and use it.
1285 Rename some variables. Update doc.
1286 (remote_xfer_partial): Get unit size and use it.
1287 (remote_read_bytes_1): Add unit_size parameter and use it.
1288 Rename some variables. Update doc.
1289 (remote_write_bytes): Same.
1290 (remote_xfer_live_readonly_partial): Same.
1291 (remote_read_bytes): Same.
1292 (remote_flash_write): Update call to remote_write_bytes_aux.
1293 (remote_write_qxfer): Update call to remote_escape_output.
1294 (remote_search_memory): Same.
1295 (remote_hostio_pwrite): Same.
1297 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
1299 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
1300 locations as inserted.
1301 Update and expand comment about permanent locations.
1302 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
1303 Move comment to add_location_to_breakpoint.
1304 (update_global_location_list): Don't error out if a permanent
1305 breakpoint is not marked inserted.
1306 Don't error out if a non-permanent breakpoint location is inserted on
1307 top of a permanent breakpoint.
1309 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
1311 * breakpoint.c (make_breakpoint_permanent): Remove unused
1313 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
1315 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
1318 * NEWS: Mention new GDBHISTSIZE behavior.
1319 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
1320 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
1322 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
1324 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
1325 * top.c (init_history): Read from GDBHISTSIZE instead of
1327 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
1329 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
1331 * top.c (gdb_safe_append_history): Do not call
1332 history_truncate_file if the history is not stifled.
1334 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1336 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
1337 * syscalls/s390x-linux.xml: Likewise.
1339 2015-06-16 Michael Eager <eager@eagercon.com>
1341 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
1343 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
1345 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
1346 target_terminal_ours_for_output() before calling
1347 tui_show_frame_info(), and restore the original terminal
1348 settings afterwards.
1350 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
1352 * arm-linux-nat.c: Include nat/linux-ptrace.h.
1354 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
1356 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
1358 (mi_cmd_data_write_memory_bytes): Same.
1360 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
1362 * corefile.c (write_memory): Update doc.
1363 * gdbcore.h (write_memory): Same.
1365 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1367 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
1368 (dump_mapping_p): Use it for parameter filterflags.
1369 (linux_find_memory_regions_full): Use it for variable filterflags.
1371 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
1372 Jan Kratochvil <jan.kratochvil@redhat.com>
1374 Merge multiple hex conversions.
1375 * monitor.c: Include rsp-low.h.
1376 (fromhex): Remove definition.
1378 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
1379 Jan Kratochvil <jan.kratochvil@redhat.com>
1381 Move utility functions to common/.
1382 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
1383 Move defs to common/common-utils.c.
1384 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
1385 (skip_to_space_const): Move decls to common/common-utils.h.
1386 * common/common-defs.h: Move include of common-types.h before
1388 * common/common-utils.c: Include host-defs.h and ctype.h.
1389 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
1391 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
1393 * common/common-utils.h (strtoulst): Move decl from utils.h.
1394 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
1395 Move from cli/cli-utils.h.
1396 * common/host-defs.h: Include limits.h.
1397 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
1398 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
1399 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
1400 common/common-utils.h.
1401 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
1402 (strtoulst): Move to common/common-utils.c.
1403 * utils.h (strtoulst): Moved decl to common/common-utils.h.
1405 2015-06-15 Yao Qi <yao.qi@linaro.org>
1407 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
1409 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
1411 * build-id.c: Don't include elf-bfd.h.
1412 (build_id_bfd_get): Use bfd_build_id.
1413 (build_id_verify): Ditto.
1414 * build-id.h: Ditto.
1415 (find_separate_debug_file_by_buildid): Ditto.
1416 * python/py-objfile.c: Don't include elf-bfd.h.
1417 (objfpy_get_build_id) Use bfd_build_id.
1418 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
1419 * coffread.c: Include build-id.h.
1420 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
1422 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
1424 * windows-nat.c (do_windows_fetch_inferior_registers)
1425 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
1426 conditional with __CYGWIN__.
1428 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
1430 * completer.c: Add arch-utils.h include.
1431 (enum reg_completer_targets): New enum.
1432 (reg_or_group_completer_1): New function containing old
1433 reg_or_group_completer, add and use new parameter to control what
1434 is completed on. Use get_current_arch rather than architecture of
1435 currently selected frame.
1436 (reg_or_group_completer): Call new reg_or_group_completer_1.
1437 (reggroup_completer): Call new reg_or_group_completer_1.
1438 * completer.h (reggroup_completer): Add declaration.
1439 * tui/tui-regs.c: Add 'completer.h' include.
1440 (tui_reg_next_command): Renamed to...
1441 (tui_reg_next): ...this. Adjust parameters and return rather than
1443 (tui_reg_prev_command): Renamed to...
1444 (tui_reg_prev): ...this. Adjust parameters and return rather than
1446 (tui_reg_float_command): Delete.
1447 (tui_reg_general_command): Delete.
1448 (tui_reg_system_command): Delete.
1449 (tui_reg_command): Rewrite to perform switching of register group.
1451 (tuireglist): Remove.
1452 (tui_reggroup_completer): New function.
1453 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
1454 creation of 'tui reg' command.
1455 * NEWS: Add comment about 'tui reg' changes.
1457 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
1459 * target.c (target_read): Consider addressable unit size when
1460 reading from a memory object.
1461 (read_memory_robust): Same.
1462 (read_whatever_is_readable): Same.
1463 (target_write_with_progress): Consider addressable unit size
1464 when writing to a memory object.
1465 * target.h (target_read): Update documentation.
1466 (target_write): Add documentation.
1468 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
1470 * arch-utils.h (default_addressable_memory_unit_size): New.
1471 * arch-utils.c (default_addressable_memory_unit_size): New.
1472 * gdbarch.sh (addressable_memory_unit_size): New.
1473 * gdbarch.h: Re-generate.
1474 * gdbarch.c: Re-generate.
1476 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
1478 * target.c (target_read): Rename variables and use
1480 (target_read_with_progress): Same.
1481 (read_memory_robust): Constify parameters and rename
1483 (read_whatever_is_readable): Constify parameters,
1484 rename variables, adjust formatting.
1485 * target.h (read_memory_robust): Constify parameters.
1487 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
1489 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
1490 synthetic (non-AltiVec) vector types.
1491 (ppc64_sysv_abi_return_value): Likewise.
1493 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
1495 PR breakpoints/16465
1496 * breakpoint.c (create_breakpoint): Save extra_string for
1497 pending breakpoints.
1499 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
1501 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
1502 and bt_mask to CORE_ADDR.
1504 2015-06-11 Gary Benson <gbenson@redhat.com>
1506 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
1507 (mnsh_recv_message): Likewise.
1509 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
1511 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
1512 long long int and plongest instead of %ll.
1514 2015-06-11 Gary Benson <gbenson@redhat.com>
1516 * nat/linux-namespaces.c (gdb_wait.h): New include.
1517 (sys/wait.h): Do not include.
1519 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
1521 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
1522 end_sequence is true.
1524 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1527 * solib-target.c (library_list_start_list): Use explicit NULL
1530 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1532 * solib-target.c (library_list_start_list): Do not dereference
1533 variable version in its initialization. Make the VERSION check handle
1535 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
1537 2015-06-10 Gary Benson <gbenson@redhat.com>
1539 * NEWS: Announce support for direct access of executable and
1540 shared library files when attaching to inferiors in containers
1541 on GNU/Linux systems.
1543 2015-06-10 Gary Benson <gbenson@redhat.com>
1545 * remote.c (struct remote_state) <fs_pid>: New field.
1546 (new_remote_state): Initialize the above.
1547 (PACKET_vFile_setfs): New enum value.
1548 (remote_hostio_set_filesystem): New function.
1549 (remote_hostio_open): Call the above.
1550 (remote_hostio_unlink): Likewise.
1551 (remote_hostio_readlink): Likewise.
1552 (_initialize_remote): Register new "set/show remote
1553 hostio-setfs-packet" command.
1554 * NEWS: Announce new vFile:setfs packet.
1556 2015-06-10 Gary Benson <gbenson@redhat.com>
1558 * linux-nat.c (nat/linux-namespaces.h): New include.
1559 (fileio.h): Likewise.
1560 (linux_nat_filesystem_is_local): New function.
1561 (linux_nat_fileio_pid_of): Likewise.
1562 (linux_nat_fileio_open): Likewise.
1563 (linux_nat_fileio_readlink): Likewise.
1564 (linux_nat_fileio_unlink): Likewise.
1565 (linux_nat_add_target): Initialize to_filesystem_is_local,
1566 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
1567 (_initialize_linux_nat): New "set/show debug linux-namespaces"
1569 * NEWS: Mention new "set/show debug linux-namespaces" commands.
1571 2015-06-10 Gary Benson <gbenson@redhat.com>
1573 * target.h (struct inferior): New forward declaration.
1574 (struct target_ops) <to_filesystem_is_local>: Update comment.
1575 (struct target_ops) <to_fileio_open>: New argument inf.
1576 Update comment. All implementations updated.
1577 (struct target_ops) <to_fileio_unlink>: Likewise.
1578 (struct target_ops) <to_fileio_readlink>: Likewise.
1579 (target_filesystem_is_local): Update comment.
1580 (target_fileio_open): New argument inf. Update comment.
1581 (target_fileio_unlink): Likewise.
1582 (target_fileio_readlink): Likewise.
1583 (target_fileio_read_alloc): Likewise.
1584 (target_fileio_read_stralloc): Likewise.
1585 * target.c (target_fileio_open): New argument inf.
1586 Pass inf to implementation. Update debug printing.
1587 (target_fileio_unlink): Likewise.
1588 (target_fileio_readlink): Likewise.
1589 (target_fileio_read_alloc_1): New argument inf. Pass inf
1590 to target_fileio_open.
1591 (target_fileio_read_alloc): New argument inf. Pass inf to
1592 target_fileio_read_alloc_1.
1593 (target_fileio_read_stralloc): Likewise.
1594 * gdb_bfd.c (inferior.h): New include.
1595 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
1596 argument with new argument "inferior". Pass inferior to
1598 (gdb_bfd_open): Supply inferior argument to
1599 gdb_bfd_iovec_fileio_open.
1600 * linux-tdep.c (linux_info_proc): Supply inf argument to
1601 relevant target_fileio calls.
1602 (linux_find_memory_regions_full): Likewise.
1603 (linux_fill_prpsinfo): Likewise.
1604 * remote.c (remote_filesystem_is_local): Supply inf
1605 argument to remote_hostio_open.
1606 (remote_file_put): Likewise.
1607 (remote_file_get): Likewise.
1608 (remote_file_delete): Supply inf argument to
1609 remote_hostio_unlink.
1611 2015-06-10 Gary Benson <gbenson@redhat.com>
1613 * inf-child.c (inf_child_fileio_open): Replace comment.
1614 (inf_child_fileio_pwrite): Likewise.
1615 (inf_child_fileio_pread): Likewise.
1616 (inf_child_fileio_fstat): Insert blank line before comment.
1617 (inf_child_fileio_close): Replace comment.
1618 (inf_child_fileio_unlink): Likewise.
1619 (inf_child_fileio_readlink): Likewise.
1620 * remote.c (remote_hostio_open): Likewise.
1621 (remote_hostio_pread): Likewise.
1622 (remote_hostio_pwrite): Likewise.
1623 (remote_hostio_close): Likewise.
1624 (remote_hostio_unlink): Likewise.
1625 (remote_hostio_readlink): Likewise.
1626 (remote_hostio_fstat): Likewise.
1627 (remote_filesystem_is_local): Likewise.
1628 * target.c (target_fileio_open): Likewise.
1629 (target_fileio_pwrite): Likewise.
1630 (target_fileio_pread): Likewise.
1631 (target_fileio_fstat): Insert blank line before comment.
1632 (target_fileio_close): Replace comment.
1633 (target_fileio_unlink): Likewise.
1634 (target_fileio_readlink): Likewise.
1635 (target_fileio_read_alloc): Likewise.
1636 (target_fileio_read_stralloc): Likewise.
1638 2015-06-10 Gary Benson <gbenson@redhat.com>
1640 * linux-thread-db.c (nat/linux-namespaces.h): New include.
1641 (check_pid_namespace_match): Use linux_ns_same rather than
1642 linux_proc_pid_get_ns to spot PID namespace mismatches.
1643 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
1644 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
1646 2015-06-10 Gary Benson <gbenson@redhat.com>
1648 * configure.ac (AC_CHECK_FUNCS): Add setns.
1649 * config.in: Regenerate.
1650 * configure: Likewise.
1651 * nat/linux-namespaces.h: New file.
1652 * nat/linux-namespaces.c: Likewise.
1653 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
1654 (linux-namespaces.o): New rule.
1655 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
1656 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
1657 * config/arm/linux.mh (NATDEPFILES): Likewise.
1658 * config/i386/linux.mh (NATDEPFILES): Likewise.
1659 * config/i386/linux64.mh (NATDEPFILES): Likewise.
1660 * config/ia64/linux.mh (NATDEPFILES): Likewise.
1661 * config/m32r/linux.mh (NATDEPFILES): Likewise.
1662 * config/m68k/linux.mh (NATDEPFILES): Likewise.
1663 * config/mips/linux.mh (NATDEPFILES): Likewise.
1664 * config/pa/linux.mh (NATDEPFILES): Likewise.
1665 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
1666 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
1667 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
1668 * config/s390/linux.mh (NATDEPFILES): Likewise.
1669 * config/sparc/linux.mh (NATDEPFILES): Likewise.
1670 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
1671 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
1672 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
1674 2015-06-10 Gary Benson <gbenson@redhat.com>
1676 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
1677 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
1678 (make_cleanup_close): Likewise.
1679 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
1680 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
1681 (make_cleanup_close): Likewise.
1683 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
1685 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
1686 from SuspendThread().
1688 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
1690 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
1691 from OutputDebugString.
1693 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
1694 Mircea Gherzan <mircea.gherzan@intel.com>
1696 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
1697 MPX_BT_MASK_32): New macros.
1698 (i386_mpx_set_bounds): New function that implements
1699 the command "set-mpx-bound".
1700 (i386_mpx_enabled): Helper function to test MPX availability.
1701 (i386_mpx_bd_base): Helper function to calculate the base directory
1703 (i386_mpx_get_bt_entry): Helper function to access a bound
1705 (i386_mpx_print_bounds): Effectively display bound information.
1706 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
1708 (_initialize_i386_tdep):
1709 Add "bound" to the commands "show mpx" and "set mpx" commands.
1710 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
1711 and "show mpx" commands.
1712 * NEWS: List new commands for MPX support.
1714 2015-06-09 Gary Benson <gbenson@redhat.com>
1716 * common/fileio.h (fileio_to_host_mode): New declaration.
1717 * common/fileio.c (fileio_to_host_mode): New Function.
1718 * inf-child.c (inf_child_fileio_open): Process mode argument
1719 with fileio_to_host_mode.
1721 2015-06-09 Gary Benson <gbenson@redhat.com>
1723 * common/fileio.c (fileio_mode_pack): Fix preprocessor
1726 2015-06-05 Gary Benson <gbenson@redhat.com>
1728 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
1729 * remote.c (remote_filesystem_is_local): ...here.
1731 2015-06-04 Yao Qi <yao.qi@linaro.org>
1733 * gdbarch.c: Regenerate it.
1735 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
1737 * arch-utils.c (default_infcall_munmap): New.
1738 * arch-utils.h (default_infcall_munmap): New declaration.
1739 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
1740 (munmap_list_free, munmap_listp_free_cleanup): New.
1741 (struct setup_sections_data): Add field munmap_list_headp.
1742 (setup_sections): Call munmap_list_add.
1743 (compile_object_load): New variable munmap_list_head, initialize
1744 setup_sections_data.munmap_list_headp, return munmap_list_head.
1745 * compile/compile-object-load.h (struct munmap_list): New declaration.
1746 (struct compile_module): Add field munmap_list_head.
1747 (munmap_list_free): New declaration.
1748 * compile/compile-object-run.c (struct do_module_cleanup): Add field
1750 (do_module_cleanup): Call munmap_list_free.
1751 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
1752 * gdbarch.c: Regenerate.
1753 * gdbarch.h: Regenerate.
1754 * gdbarch.sh (infcall_munmap): New.
1755 * linux-tdep.c (linux_infcall_munmap): New.
1756 (linux_init_abi): Install it.
1758 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
1761 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
1763 2015-06-02 Yao Qi <yao.qi@linaro.org>
1765 * i386-linux-nat.c: Include linux-nat.h.
1767 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
1768 Jan Kratochvil <jan.kratochvil@redhat.com>
1771 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
1773 * dwarf2loc.c (chain_candidate): Likewise.
1775 2015-06-01 Yao Qi <yao.qi@linaro.org>
1777 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
1778 (store_vfp_regs): Use PTRACE_SETREGSET.
1780 2015-06-01 Yao Qi <yao.qi@linaro.org>
1782 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
1783 (fetch_fpregs): Likewise.
1784 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
1785 (store_fpregs): Likewise.
1787 2015-06-01 Yao Qi <yao.qi@linaro.org>
1789 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
1790 (fetch_regs): Likewise.
1791 (store_regs): Use PTRACE_SETREGSET.
1792 (store_register): Likewise.
1794 2015-06-01 Yao Qi <yao.qi@linaro.org>
1796 * arm-linux-nat.c (arm_linux_read_description): Check whether
1797 kernel supports PTRACE_GETREGSET.
1799 2015-06-01 Yao Qi <yao.qi@linaro.org>
1801 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
1802 * linux-nat.c: ... here.
1803 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
1805 * linux-nat.h: ... here.
1807 2015-06-01 Yao Qi <yao.qi@linaro.org>
1809 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
1810 * i386-linux-nat.c: Likewise.
1811 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
1812 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
1813 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
1814 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
1815 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
1817 2015-05-30 Eli Zaretskii <eliz@gnu.org>
1819 * go32-nat.c (go32_xfer_memory): Fix the return value to be
1820 compatible to what read_child and write_child return. This
1821 unbreaks that DJGPP build of GDB which was broken since v7.7.
1823 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
1825 * MAINTAINERS (Write After Approval): Add Martin Galvan.
1827 2015-05-29 Roland McGrath <mcgrathr@google.com>
1830 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
1831 rather than internal_error for an unrecognized value.
1833 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
1835 * xtensa-tdep.c (xtensa_pseudo_register_read)
1836 (xtensa_pseudo_register_write): Don't alias last pseudo register
1839 2015-05-28 Don Breazeal <donb@codesourcery.com>
1841 * infrun.c (follow_fork_inferior): Ensure the use of
1842 process-style ptids (pid,0,0) in verbose/debug "Detaching"
1845 2015-05-28 Doug Evans <dje@google.com>
1847 * dwarf2read.c (record_line_ftype): Remove, duplicate.
1849 2015-05-28 Yao Qi <yao.qi@linaro.org>
1851 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
1852 (arm_linux_fetch_inferior_registers): Use
1853 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
1854 (arm_linux_store_inferior_registers): Likewise.
1855 (arm_linux_read_description): Don't set
1856 arm_linux_has_wmmx_registers.
1857 * arm-tdep.c (arm_gdbarch_init): Set
1858 tdep->have_wmmx_registers according target descriptions.
1859 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
1862 2015-05-28 Yao Qi <yao.qi@linaro.org>
1864 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
1865 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
1866 instead of arm_linux_vfp_register_count.
1867 (store_vfp_regs): Likewise.
1868 (arm_linux_fetch_inferior_registers): Likewise.
1869 (arm_linux_store_inferior_registers): Likewise.
1870 (arm_linux_read_description): Don't set
1871 arm_linux_vfp_register_count.
1872 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
1874 * arm-tdep.c (arm_gdbarch_init): Add assert on
1876 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
1877 field to vfp_register_count. All users updated.
1879 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
1881 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
1882 ELFOSABI_GNU binaries.
1884 2015-05-27 Doug Evans <dje@google.com>
1886 * dwarf2read.c (lnp_state_machine): New typedef.
1887 (lnp_reader_state): New typedef.
1888 (dwarf_record_line_1): Renamed from dwarf_record_line.
1889 All callers updated.
1890 (dwarf_record_line): New function.
1891 (init_lnp_state_machine): New function.
1892 (check_line_address): Replace p_record_line parameter with state.
1893 All callers updated.
1894 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
1895 Update to record state in lnp_state_machine.
1897 2015-05-27 Doug Evans <dje@google.com>
1899 * dwarf2read.c (record_line_ftype): New typedef.
1900 (check_line_address): New function.
1901 (dwarf_decode_lines_1): Call it.
1903 2015-05-27 Doug Evans <dje@google.com>
1905 * NEWS: Mention "set debug dwarf-line".
1906 * dwarf2read.c (dwarf_line_debug): New static global.
1907 (add_include_dir): Add debug dwarf-line support.
1908 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
1909 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
1911 2015-05-27 Doug Evans <dje@google.com>
1913 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
1914 All callers updated.
1915 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
1916 * cp-support.h (cp_lookup_nested_symbol): Update.
1918 2015-05-27 Doug Evans <dje@google.com>
1921 * block.c (block_find_symbol): New function.
1922 (block_find_non_opaque_type): Ditto.
1923 (block_find_non_opaque_type_preferred): Ditto.
1924 * block.h (block_symbol_matcher_ftype): New typedef.
1925 (block_find_symbol): Declare.
1926 (block_find_non_opaque_type): Ditto.
1927 (block_find_non_opaque_type_preferred): Ditto.
1928 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
1929 * psymtab.c (psym_lookup_symbol): Ditto.
1930 * symtab.c (basic_lookup_transparent_type_1): New function.
1931 (basic_lookup_transparent_type): Call it.
1933 2015-05-27 Yao Qi <yao.qi@linaro.org>
1935 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
1936 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
1938 2015-05-27 Yao Qi <yao.qi@linaro.org>
1940 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
1942 (aarch64_record_load_store): Likewise.
1944 2015-05-26 Doug Evans <dje@google.com>
1946 PR c++/18141, c++/18417.
1947 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
1950 2015-05-26 Doug Evans <dje@google.com>
1952 * NEWS: Add entries for command renamings.
1953 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
1955 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
1956 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
1958 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
1959 All callers updated. Fix spelling of DWARF in help text.
1960 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
1962 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
1964 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
1965 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
1966 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
1968 (show_dwarf_always_disassemble): Renamed from
1969 show_dwarf2_always_disassemble. All callers updated.
1970 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
1971 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
1972 "set/show dwarf max-cache-age". Rename
1973 "set/show dwarf2 always-disassemble" to
1974 "set/show dwarf always-disassemble". Rename
1975 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
1976 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
1978 2015-05-26 Doug Evans <dje@google.com>
1981 * python/py-lazy-string.c (stpy_convert_to_value): Use
1982 gdbpy_gdb_memory_error not PyExc_MemoryError.
1983 (gdbpy_create_lazy_string_object): Ditto.
1985 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
1987 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
1989 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
1991 * tui/tui-regs.c (tui_reg_prev_command): New function.
1992 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
1993 * reggroups.c (reggroup_prev): New function.
1994 * reggroups.h (reggroup_prev): Add declaration. Update comment.
1996 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
1997 Yao Qi <yao.qi@linaro.org>
1999 * aarch64-linux-tdep.c: Include linux-record.h and
2001 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
2002 (aarch64_syscall): New enum.
2003 (aarch64_canonicalize_syscall): New function.
2004 (aarch64_all_but_pc_registers_record): New function.
2005 (aarch64_linux_syscall_record): New function.
2006 (aarch64_linux_init_abi): Install AArch64 process record
2007 handler. Update to handle syscall recording.
2008 * aarch64-tdep.c: Include record.h and record-full.h.
2009 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
2010 (struct aarch64_mem_r): Define.
2011 (aarch64_record_result): New enum.
2012 (struct insn_decode_record): Define.
2013 (insn_decode_record): New typedef.
2014 (aarch64_record_data_proc_reg): New function.
2015 (aarch64_record_data_proc_imm): New function.
2016 (aarch64_record_branch_except_sys): New function.
2017 (aarch64_record_load_store): New function.
2018 (aarch64_record_data_proc_simd_fp): New function.
2019 (aarch64_record_asimd_load_store): New function.
2020 (aarch64_record_decode_insn_handler): New function.
2021 (deallocate_reg_mem): New function.
2022 (aarch64_process_record): New function.
2023 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
2025 (aarch64_process_record): New extern declaration.
2026 * configure.tgt: Add linux-record.o to gdb_target_obs.
2027 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
2029 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
2031 * NEWS: Add a note on process record-replay support on aarch64*-linux*
2034 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
2036 * amd64-tdep.c: Replace in_function_epilogue_p with
2037 stack_frame_destroyed_p throughout.
2038 * arch-utils.c: Ditto.
2039 * arch-utils.h: Ditto.
2040 * arm-tdep.c: Ditto.
2041 * breakpoint.c: Ditto.
2042 * gdbarch.sh: Ditto.
2043 * hppa-tdep.c: Ditto.
2044 * i386-tdep.c: Ditto.
2045 * mips-tdep.c: Ditto.
2046 * nios2-tdep.c: Ditto.
2047 * rs6000-tdep.c: Ditto.
2048 * s390-linux-tdep.c: Ditto.
2049 * score-tdep.c: Ditto.
2051 * sparc-tdep.c: Ditto.
2052 * sparc-tdep.h: Ditto.
2053 * sparc64-tdep.c: Ditto.
2054 * spu-tdep.c: Ditto.
2055 * tic6x-tdep.c: Ditto.
2056 * tilegx-tdep.c: Ditto.
2057 * xstormy16-tdep.c: Ditto.
2058 * gdbarch.c, gdbarch.h: Re-generated.
2060 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
2062 * NEWS: Mention 'tui enable' and 'tui disable'.
2063 * tui/tui.c (tui_enable_command): New function.
2064 (tui_disable_command): New function.
2065 (_initialize_tui): New function.
2067 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
2069 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
2071 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
2073 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
2076 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
2078 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
2080 (tui_set_layout_for_display_command): ...here, before calling
2081 tui_set_layout. Only set the layout if gdb has not already
2082 entered the TUI_FAILURE state.
2084 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
2086 * tui/tui-layout.c (layout_completer): New function.
2087 (_initialize_tui_layout): Set completer on layout command.
2089 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
2091 * tui/tui-layout.c (tui_set_layout): Remove
2092 tui_register_display_type parameter. Remove all checking of this
2093 parameter, and reindent function. Update header comment.
2094 (tui_set_layout_for_display_command): Rename to...
2095 (tui_set_layout_by_name): ...this, and don't check for different
2096 register class types, don't pass a tui_register_display_type to
2097 tui_set_layout. Update header comment.
2098 (layout_names): Remove register set specific names.
2099 * tui/tui-layout.h (tui_set_layout): Remove
2100 tui_register_display_type parameter.
2101 * tui/tui.c (tui_rl_change_windows): Don't pass a
2102 tui_register_display_type to tui_set_layout.
2103 (tui_rl_delete_other_windows): Likewise.
2104 (tui_enable): Likewise.
2105 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
2106 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
2107 (TUI_GENERAL_REGS_NAME): Remove.
2108 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
2109 (TUI_SPECIAL_REGS_NAME): Remove.
2110 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
2111 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
2112 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
2113 (enum tui_register_display_type): Remove.
2114 (struct tui_layout_def): Remove regs_display_type and
2115 float_regs_display_type fields.
2116 (struct tui_data_info): Remove regs_display_type field.
2117 (tui_layout_command): Use new name for
2118 tui_set_layout_for_display_command.
2119 * tui/tui-data.c (layout_def): Don't initialise removed fields.
2120 (tui_clear_win_detail): Don't initialise removed fields of
2122 * tui/tui-regs.c (tui_show_registers): Use new name for
2123 tui_set_layout_for_display_command.
2124 * tui/tui.h (tui_set_layout_for_display_command): Rename
2126 (tui_set_layout_by_name): ...this.
2127 * printcmd.c (display_command): Remove tui related layout call,
2130 2015-05-20 Joel Brobecker <brobecker@adacore.com>
2132 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
2133 (handle_inferior_event): New function.
2135 2015-05-20 Joel Brobecker <brobecker@adacore.com>
2137 * ada-lang.c (to_fixed_array_type): Rename local variable
2138 typename into type_name.
2140 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
2142 Fix ASAN crash for gdb.compile/compile.exp.
2143 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
2145 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
2147 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
2148 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
2149 * compile/compile-object-load.c (setup_sections, compile_object_load):
2151 * compile/compile.c (compile_to_object): Likewise.
2153 2015-05-16 Doug Evans <xdje42@gmail.com>
2155 * NEWS: Mention support for unbuffered Guile memory ports.
2156 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
2157 (ioscm_lseek_address): Improve overflow calculation.
2158 (gdbscm_memory_port_fill_input): Add assert.
2159 (gdbscm_memory_port_write): Handle unbuffered ports.
2160 Handle large writes identical to Guile's fport_write.
2161 (gdbscm_memory_port_seek): Fix seeking past end check.
2162 (gdbscm_memory_port_close): Handle closing unbuffered port.
2163 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
2164 (ioscm_init_memory_port): Handle unbuffered ports.
2165 (ioscm_reinit_memory_port): Ditto.
2166 (ioscm_init_memory_port): Update size calculation.
2167 (gdbscm_open_memory): Support zero sized ports.
2169 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2171 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
2172 variable compiler warnings.
2174 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2176 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
2178 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2179 Phil Muldoon <pmuldoon@redhat.com>
2181 * NEWS (Changes since GDB 7.9): Add compile print.
2182 * compile/compile-c-support.c (add_code_header, add_code_footer)
2183 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
2184 COMPILE_I_PRINT_VALUE_SCOPE.
2185 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
2186 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
2188 * compile/compile-object-load.c: Include block.h.
2189 (get_out_value_type): New function.
2190 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
2191 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
2193 * compile/compile-object-load.h (struct compile_module): Add fields
2194 out_value_addr and out_value_type.
2195 * compile/compile-object-run.c: Include valprint.h and compile.h.
2196 (struct do_module_cleanup): Add fields out_value_addr and
2198 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
2199 COMPILE_I_PRINT_VALUE_SCOPE.
2200 (compile_object_run): Propagate out_value_addr and out_value_type.
2201 Pass OUT_VALUE_ADDR.
2202 * compile/compile.c: Include valprint.h.
2203 (compile_print_value, compile_print_command): New functions.
2204 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
2205 (_initialize_compile): Update compile code help text. Install
2206 compile_print_command.
2207 * compile/compile.h (compile_print_value): New prototype.
2208 * defs.h (enum compile_i_scope_types): Add
2209 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
2211 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2213 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
2214 Rely on its parameter count.
2215 (compile_object_load): Replace lookup_minimal_symbol_text by
2216 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
2218 * compile/compile-object-load.h (struct compile_module): Replace
2219 func_addr by func_sym.
2220 * compile/compile-object-run.c: Include block.h.
2221 (compile_object_run): Reset module variable after it is freed. Use
2222 FUNC_SYM instead of FUNC_ADDR. Rely on it.
2224 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2226 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
2227 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
2228 (c_compute_program): Call generate_register_struct after typedefs.
2229 * compile/compile-loc2c.c (push, pushf_register_address)
2230 (pushf_register): Cast to GCC_UINTPTR.
2231 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
2232 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
2233 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
2234 * compile/compile.c (_initialize_compile): Enable warnings for
2237 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2239 * cli/cli-script.c (execute_control_command): Update
2240 eval_compile_command caller.
2241 * compile/compile-object-load.c (compile_object_load): Add parameters
2242 scope and scope_data. Set them.
2243 * compile/compile-object-load.h (struct compile_module): Add fields
2244 scope and scope_data.
2245 (compile_object_load): Add parameters scope and scope_data.
2246 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
2247 scope and scope_data.
2248 (compile_object_run): Propagate the fields scope and scope_data.
2249 * compile/compile.c (compile_file_command, compile_code_command):
2250 Update eval_compile_command callers.
2251 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
2252 * compile/compile.h (eval_compile_command): Add parameter scope_data.
2253 * defs.h (struct command_line): Add field scope_data.
2255 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2257 * printcmd.c (struct format_data): Move it to valprint.h.
2258 (print_command_parse_format, print_value): New functions from ...
2259 (print_command_1): ... here. Call them.
2260 * valprint.h (struct format_data): Move it here from printcmd.c.
2261 (print_command_parse_format, print_value): New declarations.
2263 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2265 * compile/compile-object-load.c (compile_object_load): Add
2266 COMPILE_DEBUG message.
2268 2015-05-15 Jerome Guitton <guitton@adacore.com>
2270 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
2271 index to get element instead of enum value.
2272 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
2273 of index to compute length, but enum values to compute bounds.
2274 (ada_array_length): Use enum position of index instead of enum value.
2275 (pos_atr): Move position computation to...
2276 (ada_evaluate_subexp): Use enum values to compute bounds.
2277 * gdbtypes.c (discrete_position): ...this new function.
2278 * gdbtypes.h (discrete_position): New function declaration.
2279 * valprint.c (val_print_array_elements): Call discrete_position
2280 to handle array indexed by non-contiguous enumeration types.
2282 2015-05-15 Jerome Guitton <guitton@adacore.com>
2284 * ada-lang.c (find_parallel_type_by_descriptive_type):
2285 Go through typedefs during lookup.
2286 (to_fixed_array_type): Add support for non-bit packed arrays
2287 as variable-length fields.
2289 2015-05-15 Pedro Alves <palves@redhat.com>
2290 Simon Marchi <simon.marchi@ericsson.com>
2292 * event-loop.c (gdb_notifier) <next_file_handler,
2293 next_poll_fds_index>: New fields.
2294 (get_next_file_handler_to_handle_and_advance): New function.
2295 (delete_file_handler): If deleting the next file handler to
2296 handle, advance to the next file handler.
2297 (gdb_wait_for_event): Bail early if no event fired. Poll file
2298 handlers in round-robin fashion.
2300 2015-05-15 Pedro Alves <palves@redhat.com>
2302 * linux-tdep.c (linux_find_memory_regions_full): Rename local
2303 'private' to 'priv'.
2305 2015-05-15 Pedro Alves <palves@redhat.com>
2307 * nat/linux-nat.h: Include "target/waitstatus.h".
2309 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
2311 * python/py-unwind.c (struct reg_info): Move out of ...
2312 (struct cached_frame_info): ... this scope.
2313 (pending_frame_object_type, unwind_info_object_type): Make extern.
2315 2015-05-15 Joel Brobecker <brobecker@adacore.com>
2317 * ada-lang.c (ada_value_primitive_packed_val): Make sure
2318 accumSize is never negative.
2320 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
2322 * tui/tui-command.c: Remove include of <ctype.h>.
2323 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
2325 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
2327 * dwarf2read.c (die_needs_namespace): Return 1 for
2328 DW_TAG_inlined_subroutine.
2330 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2332 * regcache.c (regcache_cpy_no_passthrough): New declaration.
2333 (regcache_cpy_no_passthrough): Make it static, add function comment.
2334 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
2335 (regcache_cpy_no_passthrough): Remove declaration.
2337 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2339 * gdbthread.h (struct thread_control_state): Update comment for
2341 * infcall.c (run_inferior_call): Update comment about
2343 * infcmd.c (get_return_value): Update comment about stop_registers.
2344 (finish_forward): Update comment about proceed_to_finish.
2345 * infrun.c (stop_registers): Remove.
2346 (clear_proceed_status, normal_stop): Remove stop_registers handling.
2347 * infrun.h (stop_registers): Remove.
2349 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2351 * infcall.c (struct dummy_frame_context_saver)
2352 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
2353 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
2354 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
2356 (call_function_by_hand_dummy): Move discard_cleanups of
2357 inf_status_cleanup before dummy_frame_push. Call
2358 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
2359 Use dummy_frame_context_saver_get_regs instead of stop_registers.
2360 * infcall.h (struct dummy_frame_context_saver)
2361 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
2362 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
2364 * infcmd.c: Include infcall.h.
2365 (get_return_value): Add parameter ctx_saver, use it instead of
2367 (print_return_value): Add parameter ctx_saver, pass it.
2368 (struct finish_command_continuation_args): Add field ctx_saver.
2369 (finish_command_continuation): Update print_return_value caller.
2370 (finish_command_continuation_free_arg): Free also ctx_saver.
2371 (finish_forward): Call dummy_frame_context_saver_setup.
2372 * inferior.h (struct dummy_frame_context_saver): New declaration.
2373 (get_return_value): Add parameter ctx_saver.
2374 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
2375 get_return_value caller.
2377 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2379 * dummy-frame.c (struct dummy_frame_dtor_list): New.
2380 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
2381 (remove_dummy_frame): Process dtor_list.
2382 (pop_dummy_frame): Process dtor_list.
2383 (register_dummy_frame_dtor): Maintain dtor_list.
2384 (find_dummy_frame_dtor): Handle dtor_list.
2385 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
2388 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2390 * compile/compile-object-run.c (do_module_cleanup): Add parameter
2392 (compile_object_run): Update do_module_cleanup caller.
2393 * dummy-frame.c: Include infcall.h.
2394 (struct dummy_frame): Update dtor comment.
2395 (remove_dummy_frame): Call dtor.
2396 (pop_dummy_frame): Update dtor caller.
2397 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
2400 2015-05-13 Joel Brobecker <brobecker@adacore.com>
2404 2015-05-13 Joel Brobecker <brobecker@adacore.com>
2406 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
2407 Xmethods now being able to specify a result type to that new
2410 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
2412 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
2413 first before resizing the window.
2414 * tui/tui.c (tui_enable): Likewise.
2416 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2418 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
2419 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
2420 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
2421 dummy_dtor parameter.
2422 * infcall.h: Include dummy-frame.h.
2423 (call_function_by_hand_dummy_dtor_ftype): Remove.
2424 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
2427 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
2430 * top.c (history_size_setshow_var): Change type to signed.
2431 Initialize to -2. Update documentation.
2432 (set_readline_history_size): Define.
2433 (set_history_size_command): Use it. Remove logic for handling
2435 (init_history): Use set_readline_history_size(). Test for a
2436 value of -2 instead of 0 when determining whether to set a
2437 default history size.
2438 (init_main): Decode the argument of the "size" command as a
2439 zuinteger_unlimited.
2441 2015-05-12 Doug Evans <dje@google.com>
2443 * dwarf2read.c (struct file_entry): Tweak comments.
2444 (get_debug_line_section): Tweak comments.
2446 2015-05-12 Don Breazeal <donb@codesourcery.com>
2448 * NEWS: Announce fork support in the RSP and support
2449 for fork debugging in extended mode.
2451 2015-05-12 Don Breazeal <donb@codesourcery.com>
2453 * remote.c (remote_insert_fork_catchpoint): New function.
2454 (remote_remove_fork_catchpoint): New function.
2455 (remote_insert_vfork_catchpoint): New function.
2456 (remote_remove_vfork_catchpoint): New function.
2457 (pending_fork_parent_callback): New function.
2458 (remove_new_fork_child): New function.
2459 (remote_update_thread_list): Call remote_notif_get_pending_events
2460 and remove_new_fork_child.
2461 (extended_remote_kill): Kill fork child when killing the
2462 parent before follow_fork completes.
2463 (init_extended_remote_ops): Initialize target vector with
2464 new fork catchpoint functions.
2466 2015-05-12 Don Breazeal <donb@codesourcery.com>
2468 * remote.c (remove_vfork_event_p): New function.
2469 (remote_follow_fork): Add vfork event type to event checking.
2470 (remote_parse_stop_reply): New stop reasons "vfork" and
2471 "vforkdone" for RSP 'T' Stop Reply Packet.
2473 2015-05-12 Don Breazeal <donb@codesourcery.com>
2475 * linux-nat.c (linux_nat_ptrace_options): New function.
2476 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
2477 Call linux_nat_ptrace_options and use different argument to
2478 linux_enable_event_reporting.
2479 (_initialize_linux_nat): Delete call to
2480 linux_ptrace_set_additional_flags.
2481 * nat/linux-ptrace.c (current_ptrace_options): Rename to
2482 supported_ptrace_options.
2483 (additional_flags): Delete variable.
2484 (linux_check_ptrace_features): Use supported_ptrace_options.
2485 (linux_test_for_tracesysgood, linux_test_for_tracefork):
2486 Likewise, and remove additional_flags check.
2487 (linux_enable_event_reporting): Change 'attached' argument to
2488 'options'. Use supported_ptrace_options.
2489 (ptrace_supports_feature): Change comment. Use
2490 supported_ptrace_options.
2491 (linux_ptrace_set_additional_flags): Delete function.
2492 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
2493 Delete function prototype.
2494 * remote.c (remote_fork_event_p): New function.
2495 (remote_detach_pid): New function.
2496 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
2497 if doing detach-on-fork.
2498 (remote_follow_fork): New function.
2499 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
2500 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
2501 (init_extended_remote_ops): Initialize to_follow_fork.
2503 2015-05-12 Don Breazeal <donb@codesourcery.com>
2505 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
2506 from static to extern.
2507 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
2508 * remote.c (anonymous enum): <PACKET_fork_event_feature,
2509 * PACKET_vfork_event_feature>: New enumeration constants.
2510 (remote_protocol_features): Add table entries for new packets.
2511 (remote_query_supported): Add new feature queries to qSupported
2514 2015-05-12 Gary Benson <gbenson@redhat.com>
2516 * remote.c (remote_add_inferior): Call exec_file_locate_attach
2517 for fake PIDs as well as real ones.
2518 (remote_pid_to_exec_file): Send empty annex if PID is fake.
2520 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
2522 * NEWS (Python Scripting): Mention the new gdb.Value methods.
2523 * python/py-value.c (valpy_reference_value): New function.
2524 (valpy_const_value): Likewise.
2525 (value_object_methods): Add new methods.
2526 * value.c (make_cv_value): New function.
2527 * value.h (make_cv_value): Declare.
2529 2015-05-08 Yao Qi <yao@codesourcery.com>
2530 Sandra Loosemore <sandra@codesourcery.com>
2532 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
2533 to 'lh->include_dirs' before accessing to it.
2534 (psymtab_include_file_name): Likewise.
2535 (dwarf_decode_lines_1): Likewise.
2536 (dwarf_decode_lines): Likewise.
2537 (file_file_name): Likewise.
2539 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
2541 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
2542 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
2543 (nios2_linux_rt_sigreturn_init): Adjust base address of
2546 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
2548 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
2549 "trap 31" as the breakpoint instruction on all targets.
2551 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2553 * infcmd.c (print_return_value): Remove unused declaration.
2555 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2557 * dwarf2read.c (attr_to_dynamic_prop)
2558 <DW_AT_data_member_location>: Use read_type_die isntead of
2561 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2563 * ada-lang.c (ada_convert_actual): Add handling of formals
2564 passed inside an aligner type.
2566 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2568 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
2570 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
2573 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
2574 Print xmethod matcher status.
2576 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
2578 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
2579 register in the regcache when treating the PSWM register, and vice
2582 2015-05-07 Gary Benson <gbenson@redhat.com>
2584 * linux-thread-db.c (struct thread_db_info)
2585 <td_ta_map_id2thr_p>: Remove field.
2586 (try_thread_db_load_1): Remove initialization for the above.
2588 2015-05-07 Gary Benson <gbenson@redhat.com>
2590 * linux-thread-db.c (struct thread_db_info)
2591 <td_thr_validate_p>: Remove field.
2592 (try_thread_db_load_1): Remove initialization for the above.
2594 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2596 * compile/compile-object-load.c (compile_object_load): Support
2599 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2601 * compile/compile.c (compile_to_object): Make the cmd_string parameter
2602 const. Use new variables for the const compatibility.
2603 (eval_compile_command): Make the cmd_string parameter const.
2604 * compile/compile.h (eval_compile_command): Make the cmd_string
2607 2015-05-06 Joel Brobecker <brobecker@adacore.com>
2609 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
2611 * top.c (deprecated_init_ui_hook): Delete.
2612 (gdb_init): Remove handling of deprecated_init_ui_hook.
2613 * interps.c (clear_interpreter_hooks): Remove handling of
2614 deprecated_init_ui_hook.
2615 * main.c (captured_main): Update comment.
2617 2015-05-06 Joel Brobecker <brobecker@adacore.com>
2619 * solib.c (_initialize_solib): Add "info dll" alias creation.
2620 * windows-nat.c (set_windows_aliases): Delete.
2621 (_initialize_windows_nat): Remove deprecated_init_ui_hook
2623 * NEWS: Add news entry about "info dll" now being available
2626 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2628 * ada-lang.c (value_assign_to_component): Reformat and improve
2629 documentation. Remove all trailing spaces.
2631 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2633 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
2634 Stop counting inlined frames as soon as an out-of-line function
2637 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
2639 * dwarf2read.c (inherit_abstract_dies): Skip
2640 DW_TAG_GNU_call_site dies while inheriting children of an
2641 abstract DIE into a scope.
2642 (read_lexical_block_scope): Inherit abstract DIE's for
2645 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2647 * ada-valprint.c (val_print_packed_array_elements): Delete
2648 variable "len". Add a type-length check when comparing two
2649 consecutive elements of the array. Use the element's actual
2650 length in call to value_contents_eq.
2651 * ada-lang.c (ada_value_primitive_packed_val): Always return
2652 a value whose type has been resolved.
2654 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2656 * ada-lang.c (ada_value_primitive_packed_val): Recompute
2657 BIT_SIZE and LEN if the size of the resolved type is smaller
2658 than BIT_SIZE * HOST_CHAR_BIT.
2660 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2662 * ada-lang.c (ada_value_primitive_packed_val): Use a more
2663 correct address in call to value_at. Adjust call to
2664 value_address accordingly.
2666 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2668 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
2671 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2673 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
2674 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
2676 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
2677 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
2678 (resolve_dynamic_type_internal): Set pinfo.valaddr.
2679 Add handling of addr_stack->valaddr.
2680 (resolve_dynamic_type): Add "valaddr" parameter.
2681 Set pinfo.valaddr field.
2682 * ada-lang.c (ada_discrete_type_high_bound): Update call to
2683 resolve_dynamic_type.
2684 (ada_discrete_type_low_bound): Likewise.
2685 * findvar.c (default_read_var_value): Likewise.
2686 * value.c (value_from_contents_and_address): Likewise.
2688 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2690 * gdbtypes.c (resolve_dynamic_array): Use
2691 create_array_type_with_stride instead of create_array_type.
2693 2015-04-30 DJ Delorie <dj@redhat.com>
2695 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
2698 2015-04-29 Doug Evans <dje@google.com>
2701 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
2702 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
2703 EVAL_AVOID_SIDE_EFFECTS for xmethods.
2704 * extension-priv.h (struct extension_language_ops)
2705 <get_xmethod_result_type>: New member.
2706 * extension.c (get_xmethod_result_type): New function.
2707 * extension.h (get_xmethod_result_type): Declare.
2708 * python/py-xmethods.c (get_result_type_method_name): New static
2710 (py_get_result_type_method_name): Ditto.
2711 (gdbpy_get_xmethod_result_type): New function.
2712 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
2713 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
2714 * python/python.c (python_extension_ops): Add
2715 gdbpy_get_xmethod_result_type.
2716 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
2717 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
2719 (value_x_unop): Ditto.
2720 * value.c (result_type_of_xmethod): New function.
2721 * value.h (result_type_of_xmethod): Declare.
2723 2015-04-29 Gary Benson <gbenson@redhat.com>
2725 * solib.c (solib_find_1): Allow fd argument to be NULL.
2726 (exec_file_find): Update comment.
2727 (solib_find): Likewise.
2728 * exec.c (exec_file_locate_attach): Use NULL as fd
2729 argument to exec_file_find to avoid having to close
2731 * infrun.c (follow_exec): Likewise.
2733 2015-04-28 Doug Evans <dje@google.com>
2736 * python/lib/gdb/printing.py (register_pretty_printer): Handle
2737 name or __name__ attributes. Handle gdb module as first argument.
2739 2015-04-28 Doug Evans <dje@google.com>
2742 * python/py-prettyprint.c (print_children): Verify result of children
2743 iterator. Provide better error message.
2744 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
2745 * python/python.c (gdbpy_print_python_errors_p): New function.
2747 2015-04-28 Doug Evans <dje@google.com>
2749 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
2751 2015-04-28 Sasha Smundak <asmundak@google.com>
2753 * NEWS: Mention gdb.Type.optimized_out method.
2754 * python/py-type.c (typy_optimized_out): New function.
2756 2015-04-28 John Baldwin <jhb@FreeBSD.org>
2758 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
2760 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2762 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
2763 (initialize_utils): Move call of init_page_info() to ...
2764 * top.c (gdb_init): ... here.
2766 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2768 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
2769 (tui_sigwinch_handler): Still update our idea of
2770 the terminal's width and height even when TUI is not active.
2772 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2774 * utils.h (set_screen_width_and_height): Declare.
2775 * utils.c (set_screen_width_and_height): Define.
2776 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
2778 2015-04-28 Gary Benson <gbenson@redhat.com>
2780 * infrun.c (solist.h): New include.
2781 (follow_exec): Use exec_file_find to prefix execd_pathname
2784 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2786 * tui/tui-source.c (tui_set_source_content): Avoid calling
2787 strcpy() when offset is 0.
2789 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2792 * tui/tui-data.c (tui_free_window): Don't free the locator
2793 window when passed an SRC_WIN or a DISASSEM_WIN.
2795 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2797 * tui/tui-data.h (struct tui_win_element): Forward-declare.
2798 (tui_win_content): Move declaration.
2799 (struct tui_gen_win_info): Give 'content' field the
2800 type tui_win_content.
2801 * tui/tui-data.c (init_content_element): Remove redundant and
2803 (tui_add_content_elements): Remove erroneous cast.
2804 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
2806 (tui_get_begin_asm_address): Likewise.
2807 * tui/tui-regs.c (tui_show_registers): Likewise.
2808 (tui_show_register_group): Likewise.
2809 (tui_display_registers_from): Likewise.
2810 (tui_check_register_values): Likewise.
2811 * tui/tui-source.c (tui_set_source_content): Likewise.
2812 (tui_set_source_content_nil): Likewise.
2813 (tui_source_is_displayed): Likewise.
2814 * tui/tui-stack.c (tui_show_locator_content): Likewise.
2815 (tui_set_locator_fullname): Likewise.
2816 (tui_set_locator_info): Likewise.
2817 (tui_show_frame_info): Likewise.
2818 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
2819 (tui_show_source_line): Likewise.
2820 (tui_horizontal_source_scroll): Likewise.
2821 (tui_update_breakpoint_info): Likewise.
2822 (tui_set_exec_info_content): Likewise.
2823 (tui_show_exec_info_content): Likewise.
2824 (tui_alloc_source_buffer): Likewise.
2825 (tui_line_is_displayed): Likewise.
2826 (tui_addr_is_displayed): Likewise.
2828 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2830 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
2831 event if PL_FLAG_EXEC is set.
2832 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
2833 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
2834 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
2835 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
2836 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
2838 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2840 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
2841 [TDP_RFPPWAIT] New variable fbsd_pending_children.
2842 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
2843 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
2844 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
2845 [PT_LWPINFO] (fbsd_wait): New function.
2846 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
2847 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
2848 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
2849 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
2850 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
2851 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
2852 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
2853 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
2854 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
2856 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
2857 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
2858 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
2859 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
2860 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
2861 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
2862 Set "to_post_attach" to "fbsd_post_attach".
2864 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2866 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
2867 (fbsd_find_memory_regions): Mark static.
2868 (fbsd_nat_add_target): New function.
2869 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
2870 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
2871 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
2872 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
2873 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
2874 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
2876 2015-04-27 Gary Benson <gbenson@redhat.com>
2878 * objfiles.c (allocate_objfile): Do not attempt to expand name
2879 if name is a "target:" filename.
2880 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
2881 to load auto-load scripts for objfiles with "target:" filenames.
2883 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2885 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
2886 (enum s390_vector_abi_kind): New enum.
2887 (struct gdbarch_tdep)<vector_abi>: New field.
2888 (s390_effective_inner_type): Add parameter min_size. Stop
2889 unwrapping if the inner type is smaller than min_size.
2890 (s390_function_arg_float): Adjust call to
2891 s390_effective_inner_type.
2892 (s390_function_arg_vector): New function.
2893 (s390_function_arg_integer): Adjust comment.
2894 (struct s390_arg_state)<vr>: New field.
2895 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
2896 arguments according to vector ABI when appropriate.
2897 (s390_push_dummy_call): Initialize the argument state's field
2898 'vr'. Adjust calls to s390_handle_arg.
2899 (s390_register_return_value): Handle vector return values.
2900 (s390_return_value): Apply the "register" return value convention
2901 to a vector when appropriate.
2902 (s390_gdbarch_init): Initialize tdep->vector_abi.
2903 * NEWS: Announce S390 vector ABI support.
2905 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2907 * s390-linux-tdep.c (s390_return_value_convention): Remove
2908 function. Inline its logic...
2909 (s390_return_value): ...here. Instead, move the handling of the
2910 "register" return value convention...
2911 (s390_register_return_value): ...here. New function.
2913 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2916 (is_float_singleton): Remove function. Move the "singleton" part
2918 (s390_effective_inner_type): ...here. New function.
2919 (is_float_like): Remove function. Inline its logic...
2920 (s390_function_arg_float): ...here.
2921 (is_pointer_like, is_integer_like, is_struct_like): Remove
2922 functions. Inline their logic...
2923 (s390_function_arg_integer): ...here.
2924 (s390_function_arg_pass_by_reference): Remove function.
2925 (extend_simple_arg): Remove function.
2926 (alignment_of): Remove function.
2927 (struct s390_arg_state): New structure.
2928 (s390_handle_arg): New function.
2929 (s390_push_dummy_call): Move parameter placement logic to the new
2930 function s390_handle_arg. Call it for calculating the stack area
2931 sizes first, and again for actually writing the parameters.
2933 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2935 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
2936 false if the argument is zero.
2938 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
2940 * ada-lang.c (template_to_static_fixed_type): Return input type
2941 when it is already fixed. Cache the input type itself when not
2942 creating a static fixed copy. Make it explicit that we never
2943 molestate the input type.
2944 * gdbtypes.c (resolve_dynamic_struct): Reset the
2945 TYPE_TARGET_TYPE field for resolved copies.
2947 2015-04-27 Joel Brobecker <brobecker@adacore.com>
2949 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
2950 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
2951 (template_to_static_fixed_type): Call ada_check_typedef only
2954 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
2956 * cli/cli-dump.c (srec_dump_command): Add internationalization
2958 (ihex_dump_command): Likewise.
2959 (tekhex_dump_command): Likewise.
2960 (binary_dump_command): Likewise.
2961 (binary_append_command): Likewise.
2963 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
2965 * cli/cli-dump.c (verilog_cmdlist): New variable.
2966 (dump_verilog_memory): New function.
2967 (dump_verilog_value): New function.
2968 (verilog_dump_command): New function.
2969 (_initialize_cli_dump): Add new commands to support verilog dump
2971 * NEWS: Add entry for "dump verilog".
2973 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
2975 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
2976 descriptive type when there is none.
2978 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
2980 * tui/tui-win.c (tui_async_resize_screen): Call
2981 rl_resize_terminal().
2983 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
2985 * windows-nat.c (handle_output_debug_string): Don't change
2986 current_event.dwThreadId.
2987 (get_windows_debug_event): Use thread_id, rather than relying on
2988 current_event.dwThreadId being changed.
2990 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
2992 * windows-nat.c (windows_continue): Report an error if
2993 ContinueDebugEvent() fails.
2995 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
2997 * windows-nat.c (windows_resume): Fix misspelling in debug output.
2999 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
3001 * windows-nat.c (get_windows_debug_event): Replace retval with
3002 thread_id throughout. Update stale comment.
3004 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
3006 * windows-nat.c (get_windows_debug_event): Don't use ternary
3007 conditional operator.
3009 2015-04-21 Pierre Muller <muller@sourceware.org>
3012 p-exp.y (yylex): Reorganize code to return the matched pattern
3013 for a field of this.
3015 2015-04-21 Gary Benson <gbenson@redhat.com>
3017 * common/fileio.h (fileio_to_host_openflags): New declaration.
3018 * common/fileio.c (fcntl.h): New include.
3019 (fileio_to_host_openflags): New function, factored out from...
3020 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
3023 2015-04-21 Kevin Buettner <kevinb@redhat.com>
3025 * rl78-tdep.c (RL78_SP_ADDR): Define.
3026 (opc_reg_to_gdb_regnum): New static function.
3027 (rl78_analyze_prologue): Recognize instructions forming slightly
3028 more interesting prologues.
3030 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
3033 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
3034 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
3035 TYPE_CODE_REF types so that they are not considered as dynamic
3036 depending on the referenced type.
3037 (resolve_dynamic_type_internal): Likewise.
3039 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
3042 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
3043 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
3044 "top_level" parameter.
3045 (resolve_dynamic_type_internal): Remove the unused "top_level"
3046 parameter. Update call to is_dynamic_type_internal.
3047 (is_dynamic_type): Update call to is_dynamic_type_internal.
3048 (resolve_dynamic_range): Update call to
3049 resolve_dynamic_type_internal.
3050 (resolve_dynamic_union): Likewise.
3051 (resolve_dynamic_struct): Likewise.
3052 (resolve_dynamic_type): Likewise.
3054 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
3056 * breakpoint.c (update_dprintf_command_list): Remove duplicated
3059 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
3061 * reply_mig_hack.awk: Robustify parsing.
3063 * reply_mig_hack.awk: Don't bother to declare an intermediate
3064 function pointer variable.
3066 2015-04-17 Doug Evans <dje@google.com>
3068 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
3069 to "exec_displacement" to avoid confusion with inner use of the name.
3071 2015-04-17 Pedro Alves <palves@redhat.com>
3073 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
3074 if HW point of TYPE isn't supported.
3076 2015-04-17 Yao Qi <yao.qi@linaro.org>
3077 Pedro Alves <palves@redhat.com>
3079 * target.h (target_can_use_hardware_watchpoint): Update comments.
3080 Remove trailing ";".
3082 2015-04-17 Gary Benson <gbenson@redhat.com>
3084 * remote.c (remote_add_inferior): New argument try_open_exec.
3085 If nonzero, attempt to open the inferior's executable file as
3086 the main executable if no main executable is open already.
3087 All callers updated.
3088 * NEWS: Mention that GDB now supports automatic location and
3089 retrieval of executable + files from remote targets.
3091 2015-04-17 Gary Benson <gbenson@redhat.com>
3093 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
3094 * remote.c (PACKET_qXfer_exec_file): Likewise.
3095 (remote_protocol_features): Register the
3096 "qXfer:exec-file:read" feature.
3097 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
3098 (remote_pid_to_exec_file): New function.
3099 (init_remote_ops): Initialize to_pid_to_exec_file.
3100 (_initialize_remote): Register new "set/show remote
3101 pid-to-exec-file-packet" command.
3102 * NEWS: Announce new qXfer:exec-file:read packet.
3104 2015-04-17 Gary Benson <gbenson@redhat.com>
3106 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
3108 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
3109 New function, factored out from...
3110 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
3112 2015-04-17 Gary Benson <gbenson@redhat.com>
3114 * exec.c (solist.h): New include.
3115 (exec_file_locate_attach): Prefix absolute executable
3116 paths with gdb_sysroot if set.
3117 * NEWS: Mention that executable paths may be prepended
3120 2015-04-17 Gary Benson <gbenson@redhat.com>
3122 * solist.h (exec_file_find): New declaration.
3123 * solib.c (solib_find_1): New function, factored out from...
3124 (solib_find): ...here.
3125 (exec_file_find): New function.
3127 2015-04-17 Gary Benson <gbenson@redhat.com>
3129 * gdbcore.h (exec_file_locate_attach): New declaration.
3130 * exec.c (exec_file_locate_attach): New function, factored
3132 * infcmd.c (attach_command_post_wait): ...here.
3134 2015-04-17 Mike Frysinger <vapier@gentoo.org>
3136 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
3138 2015-04-16 Yao Qi <yao.qi@linaro.org>
3140 * infrun.c (maybe_software_singlestep): Declare.
3141 (displaced_step_fixup): Call maybe_software_singlestep.
3143 2015-04-15 Doug Evans <dje@google.com>
3145 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
3147 2015-04-15 Doug Evans <dje@google.com>
3149 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
3151 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
3153 * python/lib/gdb/command/unwinders.py: Add parentheses.
3155 2015-04-15 Yao Qi <yao.qi@linaro.org>
3157 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
3159 2015-04-15 Yao Qi <yao.qi@linaro.org>
3161 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
3163 2015-04-15 Yao Qi <yao.qi@linaro.org>
3165 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
3166 dsc->insn_size instead of 4.
3168 2015-04-14 Gary Benson <gbenson@redhat.com>
3170 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
3171 * minidebug.c (lzma_stat): Likewise.
3172 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
3173 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
3175 2015-04-13 Stan Shebs <stanshebs@google.com>
3177 * MAINTAINERS: Update my email address.
3179 2015-04-13 John Baldwin <jhb@FreeBSD.org>
3181 * amd64-tdep.c (amd64_target_description): New function.
3182 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
3183 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
3184 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
3185 x86 extended save area.
3186 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
3187 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
3188 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
3189 (_initialize_amd64fbsd_nat): Set "to_read_description" to
3190 "amd64fbsd_read_description".
3191 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
3192 (amd64fbsd_supply_xstateregset): New function.
3193 (amd64fbsd_collect_xstateregset): New function.
3194 Add "amd64fbsd_xstateregset".
3195 (amd64fbsd_iterate_over_regset_sections): New function.
3196 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
3197 "I386_FBSD_XSAVE_XCR0_OFFSET".
3198 Add "iterate_over_regset_sections" gdbarch method.
3199 Add "core_read_description" gdbarch method.
3200 * i386-tdep.c (i386_target_description): New function.
3201 * i386-tdep.h: Export i386_target_description and tdesc_i386.
3202 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
3203 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
3204 x86 extended save area.
3205 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
3206 * i386bsd-nat.h: Export i386bsd_xsave_len.
3207 * i386fbsd-nat.c (i386fbsd_read_description): New function.
3208 (_initialize_i386fbsd_nat): Set "to_read_description" to
3209 "i386fbsd_read_description".
3210 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
3211 (i386fbsd_core_read_description): New function.
3212 (i386fbsd_supply_xstateregset): New function.
3213 (i386fbsd_collect_xstateregset): New function.
3214 Add "i386fbsd_xstateregset".
3215 (i386fbsd_iterate_over_regset_sections): New function.
3216 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
3217 "I386_FBSD_XSAVE_XCR0_OFFSET".
3218 Add "iterate_over_regset_sections" gdbarch method.
3219 Add "core_read_description" gdbarch method.
3220 * i386fbsd-tdep.h: New file.
3222 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3224 * NEWS (Changes since GDB 7.9): Add removed -xdb.
3225 * breakpoint.c (command_line_is_silent): Remove xdb_commands
3227 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
3229 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
3231 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
3233 * defs.h (xdb_commands): Remove declaration.
3234 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
3235 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
3236 * infcmd.c (run_no_args_command, go_command): Remove.
3237 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
3238 * infrun.c (xdb_handle_command): Remove.
3239 (_initialize_infrun): Remove xdb_commands for lz and z.
3240 * main.c (xdb_commands): Remove variable.
3241 (captured_main): Remove "xdb" from long_options.
3242 (print_gdb_help): Remove --xdb from help.
3243 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
3244 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
3245 * stack.c (backtrace_full_command, args_plus_locals_info)
3246 (current_frame_command): Remove.
3247 (_initialize_stack): Remove xdb_commands for t, T and l.
3248 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
3249 * thread.c (_initialize_thread): Remove xdb_commands condition.
3250 * tui/tui-layout.c (tui_toggle_layout_command)
3251 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
3252 (_initialize_tui_layout): Remove xdb_commands for td and ts.
3253 * tui/tui-regs.c (tui_scroll_regs_forward_command)
3254 (tui_scroll_regs_backward_command): Remove.
3255 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
3256 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
3257 (_initialize_tui_win): Remove xdb_commands for U and w.
3258 * utils.c (pagination_on_command, pagination_off_command): Remove.
3259 (initialize_utils): Remove xdb_commands for am and sm.
3261 2015-04-10 Pedro Alves <palves@redhat.com>
3263 * infrun.c (displaced_step_fixup): Switch to the event ptid
3264 earlier. If the thread stopped for a watchpoint and the
3265 target/arch has non-continuable watchpoints, cancel the displaced
3267 (resume): Don't start a displaced step if in-line step-over info
3270 2015-04-10 Pedro Alves <palves@redhat.com>
3272 * infrun.c (displaced_step_in_progress): New function.
3273 (do_target_resume): Advise target to report all signals if
3276 2015-04-10 Pedro Alves <palves@redhat.com>
3279 * infrun.c (process_event_stop_test): Don't assume a step-resume
3280 is set if tp->stepped_breakpoint is true.
3282 2015-04-10 Yao Qi <yao.qi@linaro.org>
3284 * arm-tdep.c (install_alu_reg): Update comment.
3285 (thumb_copy_alu_reg): Remove local variable rn. Update
3286 debugging message. Use r2 instead of r1 in the modified
3289 2015-04-10 Pedro Alves <palves@redhat.com>
3292 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
3293 linux_displaced_step_location as gdbarch_displaced_step_location
3295 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
3296 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
3297 * linux-tdep.c (linux_displaced_step_location): New function,
3298 based on ppc_linux_displaced_step_location.
3299 * linux-tdep.h (linux_displaced_step_location): New declaration.
3300 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
3301 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
3303 (ppc_linux_init_abi): Install linux_displaced_step_location as
3304 gdbarch_displaced_step_location hook, even without Cell/B.E..
3305 (_initialize_ppc_linux_tdep): Don't install
3306 ppc_linux_inferior_created as inferior_created observer.
3307 * s390-linux-tdep.c (s390_gdbarch_init): Install
3308 linux_displaced_step_location as gdbarch_displaced_step_location
3311 2015-04-09 Gary Benson <gbenson@redhat.com>
3313 * common/common-remote-fileio.h: Rename to...
3314 * common/fileio.h: ...this. Update all references.
3315 (remote_fileio_to_fio_error): Rename to...
3316 (host_to_fileio_error): ...this.
3317 (remote_fileio_to_be): Rename to...
3318 (host_to_bigendian): ...this. Update all callers.
3319 (remote_fileio_to_fio_uint): Rename to...
3320 (host_to_fileio_uint): ...this. Update all callers.
3321 (remote_fileio_to_fio_time): Rename to...
3322 (host_to_fileio_time): ...this. Update all callers.
3323 (remote_fileio_to_fio_stat): Rename to...
3324 (host_to_fileio_stat): ...this.
3325 Update all references.
3326 * common/common-remote-fileio.c: Rename to...
3327 * common/fileio.c: ...this. Update all references.
3328 (remote_fileio_to_fio_error): Rename to...
3329 (host_to_fileio_error): ...this. Update all callers.
3330 (remote_fileio_mode_to_target): Rename to...
3331 (fileio_mode_pack): ...this. Update all callers.
3332 (remote_fileio_to_fio_mode): Rename to...
3333 (host_to_fileio_mode): ...this. Update all callers.
3334 (remote_fileio_to_fio_ulong): Rename to...
3335 (host_to_fileio_ulong): ...this. Update all callers.
3336 (remote_fileio_to_fio_stat): Rename to...
3337 (host_to_fileio_stat): ...this. Update all callers.
3339 2015-04-09 Andy Wingo <wingo@igalia.com>
3341 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
3342 (frame_functions): Bind gdbscm_frame_read_register to
3343 frame-read-register.
3344 * guile/lib/gdb.scm (frame-read-register): Export.
3346 2015-04-09 Gary Benson <gbenson@redhat.com>
3348 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
3350 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
3351 New function, factored out the named functions below.
3352 * inf-child.c (gdb/fileio.h): Remove include.
3353 (common-remote-fileio.h): New include.
3354 (inf_child_errno_to_fileio_error): Remove function. Update
3355 all callers to use remote_fileio_to_fio_error.
3356 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
3358 2015-04-09 Andy Wingo <wingo@igalia.com>
3360 * MAINTAINERS (Write After Approval): Add Andy Wingo.
3362 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
3364 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
3365 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
3366 * configure: Regenerated.
3368 2015-04-09 Pedro Alves <palves@redhat.com>
3370 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
3371 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
3372 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
3373 * gnulib/import/Makefile.am: Update.
3374 * gnulib/import/Makefile.in: Update.
3375 * gnulib/import/m4/gnulib-cache.m4: Update.
3376 * gnulib/import/m4/gnulib-comp.m4: Update.
3377 * gnulib/import/m4/strtok_r.m4: New file.
3378 * gnulib/import/strtok_r.c: New file.
3380 2015-04-09 Pedro Alves <palves@redhat.com>
3382 * gnulib/update-gnulib.sh (aclocal version check): Filter out
3383 "called too early to check prototype".
3385 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
3388 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
3389 use a caching mechanism. Adjust comments and code to reflect
3390 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
3391 (cmdpy_completer_handle_brkchars): Adjust call to
3392 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
3393 (cmdpy_completer): Likewise.
3395 2015-04-08 Yao Qi <yao.qi@linaro.org>
3397 * spu-tdep.c (spu_gdbarch_init): Don't call
3398 set_gdbarch_cannot_step_breakpoint.
3400 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
3402 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
3404 2015-04-07 Pedro Alves <palves@redhat.com>
3406 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
3407 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
3408 (delete_exited_threads): New declaration.
3409 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
3410 * linux-nat.c (linux_nat_update_thread_list): New function.
3411 (linux_nat_add_target): Install it.
3412 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
3413 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
3414 (delete_exited_threads): New function.
3416 2015-04-07 Pedro Alves <pedro@codesourcery.com>
3418 * infrun.c (resume) <displaced stepping debug output>: Get the
3419 leader thread's regcache, not resume_ptid's.
3421 2015-04-06 Doug Evans <xdje42@gmail.com>
3423 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
3425 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
3426 Include symbol domain in debugging output.
3428 2015-04-06 Pedro Alves <palves@redhat.com>
3429 Bernd Edlinger <bernd.edlinger@hotmail.de>
3431 * configure.ac: Remove the mingw32-specific stub-termcap.o
3432 fallback, and instead fallback to the stub termcap on all hosts.
3433 * configure: Regenerate.
3434 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
3437 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
3439 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
3440 "top_level" parameter.
3441 (resolve_dynamic_type_internal): Remove the unused "top_level"
3442 parameter. Update call to is_dynamic_type_internal.
3443 (is_dynamic_type): Update call to is_dynamic_type_internal.
3444 (resolve_dynamic_range): Update call to
3445 resolve_dynamic_type_internal.
3446 (resolve_dynamic_union): Likewise.
3447 (resolve_dynamic_struct): Likewise.
3448 (resolve_dynamic_type): Likewise.
3450 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
3452 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
3453 TYPE_CODE_REF types so that they are not considered as dynamic
3454 depending on the referenced type.
3455 (resolve_dynamic_type_internal): Likewise.
3457 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
3459 * Makefile.in (top_srcdir): New.
3460 * configure: Regenerated.
3462 2015-04-02 Gary Benson <gbenson@redhat.com>
3464 * NEWS: Announce the new default sysroot of "target:".
3466 2015-04-02 Gary Benson <gbenson@redhat.com>
3468 * main.c (captured_main): Set gdb_sysroot to "target:"
3469 if not otherwise set.
3471 2015-04-02 Gary Benson <gbenson@redhat.com>
3473 * exec.c (exec_file_attach): Support "target:" filenames.
3475 2015-04-02 Gary Benson <gbenson@redhat.com>
3477 * solib.c (solib_find): Strip "target:" prefix from sysroot
3478 if accessing local files.
3480 2015-04-02 Gary Benson <gbenson@redhat.com>
3482 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
3483 checks and error messages.
3485 2015-04-02 Gary Benson <gbenson@redhat.com>
3487 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
3488 (remote_filename_p): Remove declaration.
3489 (remote_bfd_open): Likewise.
3490 * remote.c (remote_bfd_iovec_open): Remove function.
3491 (remote_bfd_iovec_close): Likewise.
3492 (remote_bfd_iovec_pread): Likewise.
3493 (remote_bfd_iovec_stat): Likewise.
3494 (remote_filename_p): Likewise.
3495 (remote_bfd_open): Likewise.
3496 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
3497 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
3498 (gdb_bfd_open_maybe_remote): Remove function.
3499 (symfile_bfd_open): Replace remote filename check with
3500 target filename check.
3501 (reread_symbols): Use gdb_bfd_open.
3502 * build-id.c (gdbcore.h): New include.
3503 (build_id_to_debug_bfd): Use gdb_bfd_open.
3504 * infcmd.c (attach_command_post_wait): Remove remote filename
3506 * solib.c (solib_find): Replace remote-specific handling with
3507 target-specific handling. Update comments where necessary.
3508 (solib_bfd_open): Replace remote-specific handling with
3509 target-specific handling.
3510 (gdb_sysroot_changed): New function.
3511 (_initialize_solib): Call the above when gdb_sysroot changes.
3512 * windows-tdep.c (gdbcore.h): New include.
3513 (windows_xfer_shared_library): Use gdb_bfd_open.
3515 2015-04-02 Gary Benson <gbenson@redhat.com>
3517 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
3518 (is_target_filename): New declaration.
3519 (gdb_bfd_has_target_filename): Likewise.
3520 (gdb_bfd_open): Update documentation comment.
3521 * gdb_bfd.c (target.h): New include.
3522 (gdb/fileio.h): Likewise.
3523 (is_target_filename): New function.
3524 (gdb_bfd_has_target_filename): Likewise.
3525 (fileio_errno_to_host): Likewise.
3526 (gdb_bfd_iovec_fileio_open): Likewise.
3527 (gdb_bfd_iovec_fileio_pread): Likewise.
3528 (gdb_bfd_iovec_fileio_close): Likewise.
3529 (gdb_bfd_iovec_fileio_fstat): Likewise.
3530 (gdb_bfd_open): Use target fileio to access paths prefixed
3531 with "target:" where necessary.
3533 2015-04-02 Gary Benson <gbenson@redhat.com>
3535 * target.h (struct target_ops) <to_filesystem_is_local>:
3537 (target_filesystem_is_local): New macro.
3538 * target-delegates.c: Regenerate.
3539 * remote.c (remote_filesystem_is_local): New function.
3540 (init_remote_ops): Initialize to_filesystem_is_local.
3542 2015-04-02 Gary Benson <gbenson@redhat.com>
3544 * target.h (struct target_ops) <to_fileio_fstat>: New field.
3545 (target_fileio_fstat): New declaration.
3546 * target.c (target_fileio_fstat): New function.
3547 * inf-child.c (inf_child_fileio_fstat): Likewise.
3548 (inf_child_target): Initialize to_fileio_fstat.
3549 * remote.c (init_remote_ops): Likewise.
3551 2015-04-01 Sasha Smundak <asmundak@google.com>
3553 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
3554 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
3555 (py-unwind.o): New recipe.
3556 * NEWS: mention Python frame unwinding.
3557 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
3558 gdb/unwinder.py and gdb/command/unwinder.py
3559 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
3561 (execute_unwinders): New function.
3562 * python/lib/gdb/command/unwinders.py: New file.
3563 * python/lib/gdb/unwinder.py: New file.
3564 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
3565 (objfpy_dealloc): Decrement frame_unwinders reference count.
3566 (objfpy_initialize): Create frame_unwinders list.
3567 (objfpy_get_frame_unwinders): New function.
3568 (objfpy_set_frame_unwinders): Ditto.
3569 (objfile_getset): Add frame_unwinders attribute to Objfile.
3570 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
3571 (pspy_dealloc): Decrement frame_unwinders reference count.
3572 (pspy_initialize): Create frame_unwinders list.
3573 (pspy_get_frame_unwinders): New function.
3574 (pspy_set_frame_unwinders): Ditto.
3575 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
3576 * python/py-unwind.c: New file.
3577 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
3578 (objpy_get_frame_unwinders): New prototype.
3579 (gdbpy_initialize_unwind): New prototype.
3580 * python/python.c (gdbpy_apply_type_printers): Call
3581 gdbpy_initialize_unwind.
3583 2015-04-01 Pedro Alves <palves@redhat.com>
3585 * infrun.c (resume): Check currently_stepping after clearing
3586 stepped_breakpoint, not before.
3588 2015-04-01 Pedro Alves <palves@redhat.com>
3590 * infrun.c (print_target_wait_results): Print all the ptid
3593 2015-04-01 Pedro Alves <palves@redhat.com>
3595 * infrun.c (keep_going): Also discard cleanups if inserting
3598 2015-04-01 Pedro Alves <palves@redhat.com>
3600 * infrun.c (wait_for_inferior): Install the
3601 finish_thread_state_cleanup cleanup across the whole function, not
3602 just around handle_inferior_event.
3604 2015-04-01 Pedro Alves <palves@redhat.com>
3606 * infrun.c (resume) <step past permanent breakpoint>: Use
3609 2015-04-01 Pedro Alves <palves@redhat.com>
3611 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
3613 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
3615 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
3617 2015-04-01 Pedro Alves <palves@redhat.com>
3619 * linux-thread-db.c (record_thread): Readd the thread to gdb's
3620 list if it was marked exited.
3622 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
3624 * configure: Regenerated.
3626 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
3627 Jan Kratochvil <jan.kratochvil@redhat.com>
3628 Oleg Nesterov <oleg@redhat.com>
3631 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
3632 New enum identifying the various options of the coredump_filter
3634 (struct smaps_vmflags): New struct.
3635 (use_coredump_filter): New variable.
3636 (decode_vmflags): New function.
3637 (mapping_is_anonymous_p): Likewise.
3638 (dump_mapping_p): Likewise.
3639 (linux_find_memory_regions_full): New variables
3640 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
3641 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
3642 parsing of its information. Implement memory mapping filtering
3643 based on its contents.
3644 (show_use_coredump_filter): New function.
3645 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
3646 * NEWS: Mention the possibility of using the
3647 '/proc/PID/coredump_filter' file when generating a corefile.
3648 Mention new command 'set use-coredump-filter'.
3650 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
3652 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
3653 read_memory_unsigned_integer.
3655 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
3657 * Makefile.in (ZLIB): New.
3658 (ZLIBINC): Likewise.
3659 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
3660 (CLIBS): Add $(ZLIB).
3661 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
3663 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
3664 * top.c (print_gdb_configuration): Remove --with-zlib and
3666 * config.in: Regenerated.
3667 * configure: Likewise.
3669 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
3671 * NEWS: Mention info os cpus support.
3672 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
3673 (struct osdata_type): Add cpus entry, reorder the entries in
3676 2015-03-31 Matthias Klose <doko@ubuntu.com>
3678 * compile/compile.c (compile_to_object): Allow triplets with or
3681 2015-03-30 Doug Evans <dje@google.com>
3684 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
3685 klass in VAR_DOMAIN.
3687 2015-03-30 Gary Benson <gbenson@redhat.com>
3689 * remote.c (remote_mourn_1): Remove function. Update all callers
3690 to use remote_mourn.
3691 (extended_remote_mourn_1): Remove function. Update all callers
3692 to use extended_remote_mourn.
3693 (extended_remote_attach_1): Remove function. Update all callers
3694 to use extended_remote_attach.
3696 2015-03-28 James Bowman <james.bowman@ftdichip.com>
3698 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
3699 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
3700 (ALLDEPFILES): Add ft32-tdep.c.
3701 * configure.tgt: Add FT32 entry.
3702 * ft32-tdep.c: New file, FT32 target-dependent code.
3703 * ft32-tdep.h: New file, FT32 target-dependent code.
3705 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
3708 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3710 * printcmd.c (print_command_1): Move expr variable scope.
3712 2015-03-27 Joel Brobecker <brobecker@adacore.com>
3714 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
3716 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
3718 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
3721 2015-03-26 Joel Brobecker <brobecker@adacore.com>
3723 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
3724 exception raised while parsing the probe arguments.
3725 Force parsing to be done using the C language parser.
3726 * expression.h (parse_expression_with_language): Declare.
3727 * parse.c (parse_expression_with_language): New function.
3729 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
3731 * MAINTAINERS (Write After Approval): Add "Jon Turney".
3733 2015-03-26 Andy Wingo <wingo@igalia.com>
3736 * dwarf2read.c (struct partial_die_info): Add has_const_value
3738 (add_partial_symbol): Don't punt on symbols that have const_value
3740 (read_partial_die): Detect DW_AT_const_value.
3742 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3745 * printcmd.c (print_command_1): Move expr variable scope.
3747 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3750 * printcmd.c (validate_format): Make the parameter cmdname const.
3752 2015-03-26 Don Breazeal <donb@codesourcery.com>
3754 * remote.c (_initialize_remote): Update comment.
3756 2015-03-26 Pedro Alves <palves@redhat.com>
3757 Jon TURNEY <jon.turney@dronecode.org.uk>
3759 * coffread.c (coff_symfile_read): When constructing the name of an
3760 import stub symbol from import symbol for amd64, only skip the
3761 char after _imp_ if the target is underscored (like i386) and the
3762 char is indeed the target's leading char.
3764 2015-03-25 Pedro Alves <palves@redhat.com>
3766 * target.h <to_async>: Replace 'callback' and 'context' parameters
3767 with boolean 'enable' parameter.
3768 (target_async): Replace CALLBACK and CONTEXT parameters with
3769 boolean ENABLE parameter.
3770 * inf-loop.c (inferior_event_handler): Adjust.
3771 * linux-nat.c (linux_nat_attach, linux_nat_resume)
3772 (linux_nat_resume): Adjust.
3773 (async_client_callback, async_client_context): Delete.
3774 (handle_target_event): Call inferior_event_handler directly.
3775 (linux_nat_async): Replace 'callback' and 'context' parameters
3776 with boolean 'enable' parameter. Adjust. Remove references to
3777 async_client_callback and async_client_context.
3778 (linux_nat_close): Adjust.
3779 * record-btrace.c (record_btrace_async): Replace 'callback' and
3780 'context' parameters with boolean 'enable' parameter. Adjust.
3781 (record_btrace_resume): Adjust.
3782 * record-full.c (record_full_async): Replace 'callback' and
3783 'context' parameters with boolean 'enable' parameter. Adjust.
3784 (record_full_resume, record_full_core_resume): Adjust.
3785 * remote.c (struct remote_state) <async_client_callback,
3786 async_client_context>: Delete fields.
3787 (remote_start_remote, extended_remote_attach_1, remote_resume)
3788 (extended_remote_create_inferior): Adjust.
3789 (remote_async_serial_handler): Call inferior_event_handler
3791 (remote_async): Replace 'callback' and 'context' parameters with
3792 boolean 'enable' parameter. Adjust.
3793 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
3795 * target-delegates.c: Regenerate.
3797 2015-03-25 Gary Benson <gbenson@redhat.com>
3798 Pedro Alves <palves@redhat.com>
3800 * target.c (fileio_ft_t): New typedef, define object vector.
3801 (fileio_fhandles): New static variable.
3802 (is_closed_fileio_fh): New macro.
3803 (lowest_closed_fd): New static variable.
3804 (acquire_fileio_fd): New function.
3805 (release_fileio_fd): Likewise.
3806 (fileio_fd_to_fh): New macro.
3807 (target_fileio_open): Wrap the file descriptor on success.
3808 (target_fileio_pwrite): Updated to use wrapped file descriptor.
3809 (target_fileio_pread): Likewise.
3810 (target_fileio_close): Likewise.
3812 2015-03-24 Pedro Alves <palves@redhat.com>
3814 * thread.c (thread_apply_all_command): Take exited threads into
3817 2015-03-24 Pedro Alves <palves@redhat.com>
3819 * infrun.c (resume, proceed): Mention
3820 switch_back_to_stepped_thread, not switch_back_to_stepping.
3822 2015-03-24 Pedro Alves <palves@redhat.com>
3824 * infrun.c (user_visible_resume_ptid): Rewrite going from
3825 most-locked to unlocked instead of the opposite. Move comment ...
3826 * infrun.h (user_visible_resume_ptid): ... here.
3828 2015-03-24 Pedro Alves <palves@redhat.com>
3830 * linux-nat.c (linux_nat_resume): Output debug logs before trying
3831 to resume the event lwp. Use the lwp's ptid instead of the passed
3832 in (maybe wildcard) ptid.
3833 (stop_wait_callback): Tweak debug log output.
3834 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
3836 (linux_nat_filter_event): In debug output, distinguish a
3837 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
3838 before trying to resume the lwp.
3840 2015-03-24 Joel Brobecker <brobecker@adacore.com>
3842 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
3843 pointer indirection.
3844 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
3845 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
3847 2015-03-24 Joel Brobecker <brobecker@adacore.com>
3849 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
3850 Renames DYN_ATTR_DATA_LOCATION.
3851 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
3852 DYN_ATTR_DATA_LOCATION.
3853 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
3854 instead of DYN_ATTR_DATA_LOCATION.
3856 2015-03-24 Pedro Alves <palves@redhat.com>
3858 * breakpoint.c (until_break_command): Adjust call to proceed.
3859 * gdbthread.h (struct thread_control_state) <stepping_command>:
3861 * infcall.c (run_inferior_call): Adjust call to proceed.
3862 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
3863 Adjust calls to proceed.
3864 (set_step_frame): Set the current thread's step_start_function
3866 (step_once): Adjust calls to proceed.
3867 (jump_command, signal_command, until_next_command)
3868 (finish_backward, finish_forward, proceed_after_attach_callback)
3869 (attach_command_post_wait): Adjust calls to proceed.
3870 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
3871 (do_target_resume): New function, factored out from ...
3872 (resume): ... here. Remove 'step' parameter. Instead, check
3873 currently_stepping to determine whether the thread should be
3875 (proceed): Remove 'step' parameter and don't set the thread's
3876 step_start_function here. Adjust call to 'resume'.
3877 (handle_inferior_event): Adjust calls to 'resume'.
3878 (switch_back_to_stepped_thread): Use do_target_resume instead of
3880 (keep_going): Adjust calls to 'resume'.
3881 * infrun.h (proceed): Remove 'step' parameter.
3883 * windows-nat.c (do_initial_windows_stuff): Adjust call to
3885 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
3887 2015-03-24 Pedro Alves <palves@redhat.com>
3889 * gdbthread.h (struct thread_control_state) <stepping_command>:
3891 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
3892 the thread's stepping_command field.
3893 * infrun.c (resume): Check the thread's stepping_command flag to
3894 determine which threads should be resumed. Rename 'entry_step'
3896 (clear_proceed_status_thread): Clear 'stepping_command'.
3897 (schedlock_applies): Change parameter type to struct thread_info
3899 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
3900 (switch_back_to_stepped_thread): Adjust calls to
3901 'schedlock_applies'.
3902 (_initialize_infrun): Adjust "set scheduler-locking step" help.
3904 2015-03-24 Pedro Alves <palves@redhat.com>
3906 * infrun.c (step_start_function): Delete and ...
3907 * gdbthread.h (struct thread_control_state) <step_start_function>:
3908 ... now a field here.
3909 * infrun.c (clear_proceed_status_thread): Clear the thread's
3910 step_start_function.
3911 (proceed, process_event_stop_test, print_stop_event): Adjust.
3913 2015-03-24 Pedro Alves <palves@redhat.com>
3915 * infrun.c (proceed): No longer handle negative step.
3917 2015-03-24 Gary Benson <gbenson@redhat.com>
3919 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
3920 (x86_linux_prepare_to_resume): Likewise.
3921 * x86-linux-nat.c (x86_linux_new_thread):
3922 Moved to nat/x86-linux.c.
3923 (x86_linux_prepare_to_resume): Likewise.
3924 * nat/x86-linux.c (x86_linux_new_thread): New function.
3925 (x86_linux_prepare_to_resume): Likewise.
3927 2015-03-24 Gary Benson <gbenson@redhat.com>
3929 * nat/x86-linux-dregs.h: New file.
3930 * nat/x86-linux-dregs.c: Likewise.
3931 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
3932 (x86-linux-dregs.o): New rule.
3933 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
3934 * config/i386/linux64.mh (NATDEPFILES): Likewise.
3935 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
3936 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
3937 (x86_linux_dr_get): Likewise.
3938 (x86_linux_dr_set): Likewise.
3939 (x86_linux_dr_get_addr): Likewise.
3940 (x86_linux_dr_get_control): Likewise.
3941 (x86_linux_dr_get_status): Likewise.
3942 (update_debug_registers_callback): Likewise.
3943 (x86_linux_dr_set_control): Likewise.
3944 (x86_linux_dr_set_addr): Likewise.
3945 (x86_linux_update_debug_registers): Likewise.
3947 2015-03-24 Gary Benson <gbenson@redhat.com>
3949 * x86-linux-nat.c (x86_linux_update_debug_registers):
3950 New function, factored out from...
3951 (x86_linux_prepare_to_resume): ...this.
3953 2015-03-24 Gary Benson <gbenson@redhat.com>
3955 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
3956 (x86_linux_dr_set): Likewise.
3957 (x86_linux_dr_get_addr): Likewise.
3958 (x86_linux_dr_get_control): Likewise.
3959 (x86_linux_dr_get_status): Likewise.
3960 (update_debug_registers_callback): Likewise.
3961 (x86_linux_dr_set_control): Likewise.
3962 (x86_linux_dr_set_addr): Likewise.
3963 (x86_linux_prepare_to_resume): Likewise.
3964 (x86_linux_new_thread): Likewise.
3966 2015-03-24 Gary Benson <gbenson@redhat.com>
3968 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
3969 (x86_linux_new_thread): Rename argument.
3971 2015-03-24 Gary Benson <gbenson@redhat.com>
3973 * nat/x86-linux.h: New file.
3974 * nat/x86-linux.c: Likewise.
3975 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
3976 (x86-linux.o): New rule.
3977 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
3978 * config/i386/linux64.mh (NATDEPFILES): Likewise.
3979 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
3980 (lwp_set_arch_private_info): New declaration.
3981 (lwp_arch_private_info): Likewise.
3982 * linux-nat.c (lwp_set_arch_private_info): New function.
3983 (lwp_arch_private_info): Likewise.
3984 * x86-linux-nat.c: Include nat/x86-linux.h.
3985 (arch_lwp_info): Removed structure.
3986 (update_debug_registers_callback):
3987 Use lwp_set_debug_registers_changed.
3988 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
3989 and lwp_set_debug_registers_changed.
3990 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
3992 2015-03-24 Gary Benson <gbenson@redhat.com>
3994 * nat/linux-nat.h (ptid_of_lwp): New declaration.
3995 (lwp_is_stopped): Likewise.
3996 (lwp_stop_reason): Likewise.
3997 * linux-nat.c (ptid_of_lwp): New function.
3998 (lwp_is_stopped): Likewise.
3999 (lwp_is_stopped_by_watchpoint): Likewise.
4000 * x86-linux-nat.c (update_debug_registers_callback):
4002 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
4005 2015-03-24 Gary Benson <gbenson@redhat.com>
4007 * linux-nat.h (linux_stop_lwp): Move declaration to...
4008 * nat/linux-nat.h (linux_stop_lwp): New declaration.
4010 2015-03-24 Gary Benson <gbenson@redhat.com>
4012 * linux-nat.h: Include nat/linux-nat.h.
4013 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
4014 * nat/linux-nat.h (struct lwp_info): New forward declaration.
4015 (iterate_over_lwps_ftype): New typedef.
4016 (iterate_over_lwps): New declaration.
4017 * linux-nat.h (iterate_over_lwps): Update comment. Use
4018 iterate_over_lwps_ftype. Update callback return value check.
4020 2015-03-24 Gary Benson <gbenson@redhat.com>
4022 * x86-nat.h (x86_debug_reg_state): Move declaration to...
4023 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
4025 2015-03-24 Gary Benson <gbenson@redhat.com>
4027 * nat/linux-nat.h (current_lwp_ptid): New declaration.
4028 * linux-nat.c (current_lwp_ptid): New function.
4029 * x86-linux-nat.c: Include nat/linux-nat.h.
4030 (x86_linux_dr_get_addr): Use current_lwp_ptid.
4031 (x86_linux_dr_get_control): Likewise.
4032 (x86_linux_dr_get_status): Likewise.
4033 (x86_linux_dr_set_control): Likewise.
4034 (x86_linux_dr_set_addr): Likewise.
4036 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
4038 PR breakpoints/16466
4039 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
4041 2015-03-23 Joel Brobecker <brobecker@adacore.com>
4043 * ser-mingw.c (ser_windows_setparity): Fix indentation.
4044 * ser-unix.c (hardwire_setparity): Likewise.
4046 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
4048 * NEWS: Mention set/show serial parity command.
4049 * monitor.c (monitor_open): Call serial_setparity.
4050 * remote.c (remote_open_1): Likewise.
4051 * ser-base.c (ser_base_serparity): New function.
4052 * ser-base.h (ser_base_setparity): Add declaration.
4053 * ser-go32.c (dos_ops): Set "setparity" field.
4054 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
4056 (ser_windows_setparity): New function.
4057 (hardwire_ops): Add ser_windows_setparity.
4058 (tty_ops): Add NULL for setparity field.
4059 (pipe_ops): Add ser_base_setparity.
4060 (tcp_ops): Likewise.
4061 * ser-pipe.c (pipe_ops): Likewise.
4062 * ser-tcp.c (tcp_ops): Likewise.
4063 * ser-unix.c (hardwire_setparity): Add declaration.
4064 (hardwire_raw): Don't reset PARENB flag.
4065 (hardwire_setparity): New function.
4066 (hardwire_ops): Add hardwire_setparity.
4067 * serial.c (serial_setparity): New function.
4068 (serial_parity): New global.
4069 (parity_none, parity_odd, parity_even, parity_enums, parity):
4071 (set_parity): New function.
4072 (_initialize_serial): Add set/show serial parity commands.
4073 * serial.h (GDBPARITY_NONE): Define.
4074 (GDBPARITY_ODD): Define.
4075 (GDBPARITY_EVEN): Define.
4076 (serial_setparity) Add declaration.
4077 (struct serial_ops): Add setparity field.
4078 * target.h (serial_parity): Add declaration.
4080 2015-03-23 Keith Seitz <keiths@redhat.com>
4082 * linespec.c (linespec_lexer_lex_keyword): Update comment.
4084 2015-03-23 Keith Seitz <keiths@redhat.com>
4086 * breakpoint.c (parse_breakpoint_sals): Use
4087 linespec_lexer_lex_keyword to ascertain if the user specified
4089 * linespec.c [IF_KEYWORD_INDEX]: Define.
4090 (linespec_lexer_lex_keyword): Export.
4091 (struct ls_parser) <keyword_ok>: Remove.
4092 A keyword is only a keyword if not followed by another keyword.
4093 (linespec_lexer_lex_one): Remove keyword_ok handling.
4094 Add comment explaining why the parsing stream is not advanced
4095 when a keyword is seen.
4096 (parse_linespec): Remove parser->keyword_ok.
4097 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
4099 2015-03-23 Keith Seitz <keiths@redhat.com>
4102 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
4103 if we find a static method with DW_AT_vtable_elem_location.
4105 2015-03-21 Eli Zaretskii <eliz@gnu.org>
4107 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
4108 before the second loop, to avoid undefined behavior. Reported by
4109 Anton Blanchard <anton@samba.org>.
4111 2015-03-20 Keven Boell <keven.boell@intel.com>
4113 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
4114 data_location usage to linked list.
4115 (resolve_dynamic_type_internal): Adapt data_location to
4117 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
4118 (copy_type_recursive, copy_type): Add copy of linked list.
4119 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
4120 (struct dynamic_prop_list): New struct.
4121 * dwarf2read.c (set_die_type): Set data_location data.
4123 2015-03-20 Pedro Alves <palves@redhat.com>
4125 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
4126 inner block and make it const.
4127 * machoread.c (get_archive_prefix_len): Make "lparen" const.
4129 2015-03-20 Pedro Alves <palves@redhat.com>
4131 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
4132 * breakpoint.h (set_breakpoint_condition): Update declaration.
4134 2015-03-20 Pedro Alves <palves@redhat.com>
4136 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
4138 2015-03-20 Pedro Alves <palves@redhat.com>
4140 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
4142 2015-03-20 Pedro Alves <palves@redhat.com>
4144 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
4146 2015-03-20 Pedro Alves <palves@redhat.com>
4148 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
4149 (nto_init_solib_absolute_prefix): Likewise.
4151 2015-03-20 Pedro Alves <palves@redhat.com>
4153 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
4154 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
4156 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
4158 * config/djgpp/README: Remove gdb.hp.
4160 2015-03-20 Yao Qi <yao.qi@linaro.org>
4162 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
4163 set_gdbarch_cannot_step_breakpoint.
4165 2015-03-19 Pedro Alves <palves@redhat.com>
4167 * linux-nat.c (linux_resume_one_lwp): Rename to ...
4168 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
4169 instead call perror_with_name.
4170 (check_ptrace_stopped_lwp_gone): New function.
4171 (linux_resume_one_lwp): Reimplement as wrapper around
4172 linux_resume_one_lwp_throw that swallows errors if the LWP is
4174 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
4175 swallows errors if the LWP is gone. Use
4176 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
4178 2015-03-19 Pedro Alves <palves@redhat.com>
4180 * linux-nat.c (status_callback): Return early if the LWP has no
4183 2015-03-19 Pedro Alves <palves@redhat.com>
4185 * linux-nat.c (select_event_lwp_callback): Update comment to no
4186 longer mention SIGTRAP.
4188 2015-03-18 Tristan Gingold <gingold@adacore.com>
4190 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
4191 redirection code to ...
4192 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
4193 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
4195 2015-03-18 Gary Benson <gbenson@redhat.com>
4197 (remote_protocol_features): Remove the "vFile:fstat" feature.
4198 (remote_hostio_fstat): Probe for "vFile:fstat" support.
4200 2015-03-11 Yao Qi <yao.qi@linaro.org>
4203 * aarch64-linux-tdep.c: Include xml-syscall.h
4204 (aarch64_linux_get_syscall_number): New function.
4205 (aarch64_linux_init_abi): Call
4206 set_gdbarch_get_syscall_number.
4207 * syscalls/aarch64-linux.xml: New file.
4209 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
4211 * ser-base.h (ser_base_setstopbits): Change second argument name
4212 from "rate" to "num".
4214 2015-03-17 Gary Benson <gbenson@redhat.com>
4215 Luke Allardyce <lukeallardyce@gmail.com>
4218 * common/common-remote-fileio.h (sys/stat.h): New include.
4219 (stuct stat): Remove forward declaration.
4221 2015-03-16 John Baldwin <jhb@FreeBSD.org>
4223 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
4224 before writing core register notes.
4226 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
4227 Pedro Alves <palves@redhat.com>
4229 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
4230 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
4231 (tgoto): Wrap with extern "C".
4233 2015-03-16 Pedro Alves <palves@redhat.com>
4234 Yuanhui Zhang <asmwarrior@gmail.com>
4236 * stub-termcap.c (tputs): Change prototype.
4238 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
4239 Pedro Alves <palves@redhat.com>
4241 * windows-nat.c (struct thread_info_struct): Rename to ...
4242 (struct windows_thread_info_struct): ... this.
4243 (thread_info): Rename to ...
4244 (windows_thread_info): ... this.
4247 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
4248 Pedro Alves <palves@redhat.com>
4250 * NEWS: New Removed targets and native configurations.
4252 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
4255 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
4256 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
4257 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
4258 ia64-hpux-tdep.h, solib-ia64-hpux.h.
4259 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
4260 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
4261 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
4263 * config/ia64/hpux.mh: Remove file.
4264 * config/pa/hpux.mh: Remove file.
4265 * configure: Rebuilt.
4266 * configure.ac (dlgetmodinfo, somread.o): Remove.
4267 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
4268 (ia64-*-hpux*): Remove its float format exception.
4269 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
4270 * hppa-hpux-nat.c: Remove file.
4271 * hppa-hpux-tdep.c: Remove file.
4272 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
4273 Move them here from hppa-tdep.h
4274 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
4275 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
4276 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
4277 Move them to hppa-tdep.c.
4278 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
4280 * ia64-hpux-nat.c: Remove file.
4281 * ia64-hpux-tdep.c: Remove file.
4282 * ia64-hpux-tdep.h: Remove file.
4283 * inf-ttrace.c: Remove file.
4284 * inf-ttrace.h: Remove file.
4285 * solib-ia64-hpux.c: Remove file.
4286 * solib-ia64-hpux.h: Remove file.
4287 * solib-pa64.c: Remove file.
4288 * solib-pa64.h: Remove file.
4289 * solib-som.c: Remove file.
4290 * solib-som.h: Remove file.
4291 * somread.c: Remove file.
4293 2015-03-13 John Baldwin <jhb@FreeBSD.org>
4295 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
4296 * config.in: Regenerate.
4297 * configure: Regenerate.
4298 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
4300 (fbsd_find_memory_regions): Use kinfo_getvmmap to
4301 enumerate memory regions if present.
4303 2015-03-13 John Baldwin <jhb@FreeBSD.org>
4305 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
4306 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
4308 (i386fbsd_sigtramp_p): Likewise.
4310 2015-03-12 John Baldwin <jhb@FreeBSD.org>
4312 * MAINTAINERS (Write After Approval): Add John Baldwin.
4314 2015-03-12 Gary Benson <gbenson@redhat.com>
4316 * solib.c (_initialize_solib): Make "set/show sysroot" use
4317 add_setshow_optional_filename_cmd so it can be restored to
4318 empty after being set.
4320 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
4322 * Makefile.in (SFILES): New source break-catch-syscall.c.
4323 (COMMON_OBS): New object break-catch-syscall.o.
4324 * break-catch-syscall.c: New file.
4325 * breakpoint.c: Remove inclusion of "xml-syscall.h".
4326 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
4327 (struct syscall_catchpoint): Likewise.
4328 (dtor_catch_syscall): Likewise.
4329 (catch_syscall_inferior_data): Likewise.
4330 (struct catch_syscall_inferior_data): Likewise.
4331 (get_catch_syscall_inferior_data): Likewise.
4332 (catch_syscall_inferior_data_cleanup): Likewise.
4333 (insert_catch_syscall): Likewise.
4334 (remove_catch_syscall): Likewise.
4335 (breakpoint_hit_catch_syscall): Likewise.
4336 (print_it_catch_syscall): Likewise.
4337 (print_one_catch_syscall): Likewise.
4338 (print_mention_catch_syscall): Likewise.
4339 (print_recreate_catch_syscall): Likewise.
4340 (catch_syscall_breakpoint_ops): Likewise.
4341 (syscall_catchpoint_p): Likewise.
4342 (create_syscall_event_catchpoint): Likewise.
4343 (catch_syscall_split_args): Likewise.
4344 (catch_syscall_command_1): Likewise.
4345 (is_syscall_catchpoint_enabled): Likewise.
4346 (catch_syscall_enabled): Likewise.
4347 (catching_syscall_number): Likewise.
4348 (catch_syscall_completer): Likewise.
4349 (clear_syscall_counts): Likewise.
4350 (initialize_breakpoint_ops): Move initialization of syscall
4351 catchpoints to break-catch-syscall.c.
4352 (_initialize_breakpoint): Move code related to syscall catchpoints
4353 to break-catch-syscall.c.
4355 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
4357 * breakpoint.c (breakpoint_find_if): New function.
4358 * breakpoint.h (breakpoint_find_if): New prototype.
4360 2015-03-11 Gary Benson <gbenson@redhat.com>
4362 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
4363 * remote-fileio.c (remote_fileio_to_host_uint): New function.
4364 (remote_fileio_to_host_ulong): Likewise.
4365 (remote_fileio_to_host_mode): Likewise.
4366 (remote_fileio_to_host_time): Likewise.
4367 (remote_fileio_to_host_stat): Likewise.
4368 * remote.c (PACKET_vFile_fstat): New enum value.
4369 (remote_protocol_features): Register the "vFile:fstat" feature.
4370 (remote_hostio_fstat): New function.
4371 (remote_bfd_iovec_stat): Use the above.
4372 (_initialize_remote): Register new "set/show remote
4373 hostio-fstat-packet" command.
4374 * symfile.c (separate_debug_file_exists): Update comment.
4375 * NEWS: Announce new vFile:fstat packet.
4377 2015-03-11 Gary Benson <gbenson@redhat.com>
4379 * common/common-remote-fileio.h: New file.
4380 * common/common-remote-fileio.c: Likewise.
4381 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
4382 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
4383 (COMMON_OBS): Add common-remote-fileio.o.
4384 (common-remote-fileio.o): New rule.
4385 * remote-fileio.h (common-remote-fileio.h): New include.
4386 * remote-fileio.c (gdb/fileio.h): Do not include.
4387 (remote_fileio_to_be): Moved to common-remote-fileio.h.
4388 (remote_fileio_to_fio_uint): Likewise.
4389 (remote_fileio_to_fio_time): Likewise.
4390 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
4391 (remote_fileio_to_fio_mode): Likewise.
4392 (remote_fileio_to_fio_ulong): Likewise.
4393 (remote_fileio_to_fio_stat): Likewise.
4395 2015-03-11 Andy Wingo <wingo@igalia.com>
4397 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
4398 we were checking the cached type, not the cached dynamic type.
4400 2015-03-11 Andy Wingo <wingo@igalia.com>
4402 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
4403 other strings, as these are on the GC'd heap, and will be
4404 collected along with the smob.
4406 2015-03-11 Andy Wingo <wingo@igalia.com>
4408 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
4409 (objfile_functions): Bind gdbscm_objfile_progspace to
4411 * guile/lib/gdb.scm: Add objfile-progspace to exports.
4413 2015-03-11 Andy Wingo <wingo@igalia.com>
4415 * guile/guile.c (_initialize_guile): Disable automatic
4416 finalization, if Guile offers us that possibility.
4417 * guile/guile.c (call_initialize_gdb_module):
4418 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
4419 finalizers in appropriate places.
4420 * configure.ac (AC_TRY_LIBGUILE): Add a check for
4421 scm_set_automatic_finalization_enabled.
4422 * configure: Regenerated.
4424 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
4426 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
4429 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
4431 * s390-linux-nat.c (struct arch_lwp_info): New.
4432 (s390_fix_watch_points): Rename to...
4433 (s390_prepare_to_resume): ...this. Skip the PER info update
4434 unless the watch points have changed.
4435 (s390_refresh_per_info, s390_new_thread): New functions.
4436 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
4437 s390_fix_watch_points.
4438 (s390_remove_watchpoint): Likewise.
4439 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
4440 Register s390_prepare_to_resume.
4442 2015-03-09 Pedro Alves <palves@redhat.com>
4445 2015-03-07 Pedro Alves <palves@redhat.com>
4446 * common/gdb_socket.h: New file.
4447 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
4449 (net_open): Use union gdb_sockaddr_u.
4451 2015-03-07 Pedro Alves <palves@redhat.com>
4453 * configure.ac (build_warnings): Move -Wmissing-prototypes
4454 -Wdeclaration-after-statement -Wmissing-parameter-type
4455 -Wold-style-declaration -Wold-style-definition to the C-specific
4457 * configure: Regenerate.
4459 2015-03-07 Pedro Alves <palves@redhat.com>
4461 * common/gdb_socket.h: New file.
4462 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
4464 (net_open): Use union gdb_sockaddr_u.
4466 2015-03-07 Pedro Alves <palves@redhat.com>
4468 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
4469 (exceptions_state_mc_action_iter)
4470 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
4472 [__cplusplus] (try_scope_depth): New global.
4473 [__cplusplus] (exception_try_scope_entry)
4474 (exception_try_scope_exit, gdb_exception_sliced_copy)
4475 (exception_rethrow): New functions.
4476 (throw_exception): In C++ mode, throw
4477 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
4478 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
4479 (throw_it): In C++ mode, use try_scope_depth.
4480 * common/common-exceptions.h [!__cplusplus]
4481 (exceptions_state_mc_action_iter)
4482 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
4484 [__cplusplus] (exception_try_scope_entry)
4485 (exception_try_scope_exit, exception_rethrow): Declare.
4486 [__cplusplus] (struct exception_try_scope): New struct.
4487 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
4489 (struct gdb_exception_RETURN_MASK_ALL)
4490 (struct gdb_exception_RETURN_MASK_ERROR)
4491 (struct gdb_exception_RETURN_MASK_QUIT): New types.
4493 2015-03-07 Pedro Alves <palves@redhat.com>
4495 * main.c (handle_command_errors): Remove volatile qualifier from
4498 2015-03-07 Pedro Alves <palves@redhat.com>
4500 * breakpoint.c (save_breakpoints): Adjust to avoid code between
4502 * gdbtypes.c (safe_parse_type): Remove empty line.
4503 (types_deeply_equal):
4504 * guile/scm-frame.c (gdbscm_frame_name):
4505 * linux-thread-db.c (find_new_threads_once):
4506 * python/py-breakpoint.c (bppy_get_commands):
4507 * record-btrace.c (record_btrace_insert_breakpoint)
4508 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
4509 (record_btrace_start_replaying): Adjust to avoid code between TRY
4512 2015-03-07 Pedro Alves <palves@redhat.com>
4514 * common/common-exceptions.c (struct catcher) <exception>: No
4515 longer a pointer to volatile exception. Now an exception value.
4516 <mask>: Delete field.
4517 (exceptions_state_mc_init): Remove all parameters. Adjust.
4518 (exceptions_state_mc): No longer pop the catcher here.
4519 (exceptions_state_mc_catch): New function.
4520 (throw_exception): Adjust.
4521 * common/common-exceptions.h (exceptions_state_mc_init): Remove
4523 (exceptions_state_mc_catch): Declare.
4524 (TRY_CATCH): Rename to ...
4525 (TRY): ... this. Remove EXCEPTION and MASK parameters.
4526 (CATCH, END_CATCH): New.
4527 All callers adjusted.
4529 2015-03-07 Tom Tromey <tromey@redhat.com>
4531 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
4533 2015-03-07 Pedro Alves <palves@redhat.com>
4535 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
4536 (amd64_epilogue_frame_cache): Normal exception handling code.
4537 * break-catch-throw.c (check_status_exception_catchpoint)
4538 (re_set_exception_catchpoint): Ditto.
4539 * cli/cli-interp.c (safe_execute_command):
4540 * cli/cli-script.c (script_from_file): Ditto.
4541 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
4543 * compile/compile-object-run.c (compile_object_run): Ditto.
4544 * cp-abi.c (baseclass_offset): Ditto.
4545 * cp-valprint.c (cp_print_value): Ditto.
4546 * exceptions.c (catch_exceptions_with_msg):
4547 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
4548 * frame.c (get_frame_address_in_block_if_available): Ditto.
4549 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
4550 (i386_sigtramp_frame_cache): Ditto.
4551 * infcmd.c (post_create_inferior): Ditto.
4552 * linespec.c (parse_linespec, find_linespec_symbols):
4553 * p-valprint.c (pascal_object_print_value): Ditto.
4554 * parse.c (parse_expression_for_completion): Ditto.
4555 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
4556 * remote.c (remote_get_noisy_reply): Ditto.
4557 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
4558 * solib-svr4.c (solib_svr4_r_map): Ditto.
4560 2015-03-06 Gary Benson <gbenson@redhat.com>
4562 * common/common-utils.h (startswith): New inline function.
4563 All places where this logic was used updated to use the above.
4565 2015-03-05 Pedro Alves <palves@redhat.com>
4568 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
4569 after reading the breakpoint's shadow memory.
4571 2015-03-05 Mark Kettenis <kettenis@gnu.org>
4573 * hppabsd-nat.c: Remove file.
4574 * hppaobsd-nat.c: New file.
4575 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
4577 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
4580 2015-03-04 Pedro Alves <palves@redhat.com>
4582 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
4583 (target_decr_pc_after_break): Delete declaration.
4584 * target.c (default_target_decr_pc_after_break)
4585 (target_decr_pc_after_break): Delete.
4586 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
4587 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
4588 * linux-thread-db.c (check_event): Likewise.
4589 * infrun.c (adjust_pc_after_break): Likewise.
4590 * darwin-nat.c (cancel_breakpoint): Likewise.
4591 * aix-thread.c (aix_thread_wait): Likewise.
4592 * target-delegates.c: Regenerate.
4594 2015-03-04 Pedro Alves <palves@redhat.com>
4596 * linux-nat.c (save_sigtrap): Check for breakpoints before
4597 checking watchpoints.
4598 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
4599 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
4600 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
4601 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
4602 (linux_nat_stopped_by_sw_breakpoint)
4603 (linux_nat_supports_stopped_by_sw_breakpoint)
4604 (linux_nat_stopped_by_hw_breakpoint)
4605 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
4606 (linux_nat_wait_1): Don't re-increment the PC if relying on
4607 SIGTRAP's siginfo->si_code.
4608 (linux_nat_add_target): Install new target methods.
4609 * linux-thread-db.c (check_event): Don't account for breakpoint PC
4610 offset if the target already adjusted the PC.
4611 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
4612 (GDB_ARCH_TRAP_BRKPT): New.
4613 (TRAP_HWBKPT): Define if not already defined.
4615 2015-03-04 Pedro Alves <palves@redhat.com>
4617 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
4618 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
4620 <stop_reason>: New field.
4621 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
4622 (packet_set_cmd_state): New function.
4623 (remote_protocol_features): Register the "swbreak" and "hwbreak"
4625 (remote_query_supported): If not disabled with the corresponding
4626 "set remote foo-packet" command, report support for the swbreak
4627 and hwbreak features.
4628 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
4630 <stop_reason>: New field.
4631 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
4632 (remote_wait_as): Adjust.
4633 (remote_stopped_by_sw_breakpoint)
4634 (remote_supports_stopped_by_sw_breakpoint)
4635 (remote_stopped_by_hw_breakpoint)
4636 (remote_supports_stopped_by_hw_breakpoint): New functions.
4637 (remote_stopped_by_watchpoint): New function.
4638 (init_remote_ops): Install them.
4639 (_initialize_remote): Register new "set/show remote
4640 swbreak-feature-packet" and "set/show remote
4641 swbreak-feature-packet" commands.
4643 2015-03-04 Pedro Alves <palves@redhat.com>
4645 * btrace.h: Include target/waitstatus.h.
4646 (struct btrace_thread_info) <stop_reason>: New field.
4647 * record-btrace.c (record_btrace_step_thread): Use
4648 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
4649 (record_btrace_decr_pc_after_break): Delete.
4650 (record_btrace_stopped_by_sw_breakpoint)
4651 (record_btrace_supports_stopped_by_sw_breakpoint)
4652 (record_btrace_stopped_by_hw_breakpoint)
4653 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
4654 (init_record_btrace_ops): Install them.
4655 * record-full.c (record_full_hw_watchpoint): Delete and replace
4657 (record_full_stop_reason): ... this throughout.
4658 (record_full_exec_insn): Adjust.
4659 (record_full_wait_1): Adjust. No longer re-increment the PC.
4660 (record_full_wait_1): Adjust. Use
4661 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
4662 (record_full_stopped_by_watchpoint): Adjust.
4663 (record_full_stopped_by_sw_breakpoint)
4664 (record_full_supports_stopped_by_sw_breakpoint)
4665 (record_full_supports_stopped_by_sw_breakpoint)
4666 (record_full_stopped_by_hw_breakpoint)
4667 (record_full_supports_stopped_by_hw_breakpoint): New functions.
4668 (init_record_full_ops, init_record_full_core_ops): Install them.
4669 * record.c (record_check_stopped_by_breakpoint): New function.
4670 * record.h: Include target/waitstatus.h.
4671 (record_check_stopped_by_breakpoint): New declaration.
4673 2015-03-04 Pedro Alves <palves@redhat.com>
4675 enum lwp_stop_reason -> enum target_stop_reason
4676 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
4677 (linux_nat_stopped_by_watchpoint, status_callback)
4678 (linux_nat_wait_1): Adjust.
4679 * linux-nat.h (enum lwp_stop_reason): Delete.
4680 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
4681 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
4682 * target/waitstatus.h (enum target_stop_reason): New.
4684 2015-03-04 Pedro Alves <palves@redhat.com>
4686 * breakpoint.c (need_moribund_for_location_type): New function.
4687 (bpstat_stop_status): Don't skipping checking moribund locations
4688 of breakpoint types which the target tell caused a stop.
4689 (program_breakpoint_here_p): New function, factored out from ...
4690 (bp_loc_is_permanent): ... this.
4691 (update_global_location_list): Don't create a moribund location if
4692 the target supports reporting stops of the type of the removed
4694 * breakpoint.h (program_breakpoint_here_p): New declaration.
4695 * infrun.c (adjust_pc_after_break): Return early if the target has
4696 already adjusted the PC. Add comments.
4697 (handle_signal_stop): If nothing explains a signal, and the target
4698 tells us the stop was caused by a software breakpoint, check if
4699 there's a breakpoint instruction in the memory. If so, adjust the
4700 PC before presenting the stop to the user. Otherwise, ignore the
4701 trap. If nothing explains a signal, and the target tells us the
4702 stop was caused by a hardware breakpoint, ignore the trap.
4703 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
4704 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
4705 to_supports_stopped_by_hw_breakpoint>: New fields.
4706 (target_stopped_by_sw_breakpoint)
4707 (target_supports_stopped_by_sw_breakpoint)
4708 (target_stopped_by_hw_breakpoint)
4709 (target_supports_stopped_by_hw_breakpoint): Define.
4710 * target-delegates.c: Regenerate.
4712 2015-03-04 Pedro Alves <palves@redhat.com>
4714 * infrun.c (follow_fork_inferior): Use the whole of the
4715 inferior_ptid and pending_follow.related_pid ptids instead of
4716 building ptids from the process components. Adjust verbose output
4717 to use target_pid_to_str.
4718 * linux-nat.c (linux_child_follow_fork): Use the whole of the
4719 inferior_ptid and pending_follow.related_pid ptids instead of
4720 building ptids from the process components.
4722 2015-03-04 Mark Kettenis <kettenis@gnu.org>
4724 * inf-ptrace.c [PT_GET_PROCESS_STATE]
4725 (inf_ptrace_insert_fork_catchpoint): New function.
4726 (inf_ptrace_remove_fork_catchpoint): New function.
4727 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
4729 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4731 * s390-linux-tdep.c (s390_register_name): Return empty string
4732 instead of NULL for registers that shouldn't be visible.
4734 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4736 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
4737 XML file for 64-bit targets.
4739 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
4741 * target.h (find_default_create_inferior): Remove declaration.
4742 (find_default_attach): Likewise.
4744 2015-03-03 Pedro Alves <palves@redhat.com>
4746 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
4747 Use ptid_get_pid to get the overall process id when resuming all
4750 2015-03-03 Pedro Alves <palves@redhat.com>
4752 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
4753 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
4754 * inf-ptrace.c (get_ptrace_pid): New function.
4755 (inf_ptrace_resume): Use it.
4756 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
4759 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4761 * nat/linux-btrace.c: Include sys/utsname.h.
4762 (linux_determine_kernel_ptr_bits): New.
4763 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
4764 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
4767 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4769 * btrace.c (ftrace_update_function): Treat return as tailcall for
4770 "_dl_runtime_resolve".
4772 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4774 * btrace.h (btrace_function) <lbegin, lend>: Remove.
4775 * btrace.c (ftrace_debug): Do not print the line range.
4776 (ftrace_skip_file, ftrace_update_lines): Remove.
4777 (ftrace_new_function): Remove lbegin and lend initialization.
4778 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
4779 * record-btrace.c (btrace_compute_src_line_range): New.
4780 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
4782 2015-03-02 Pedro Alves <palves@redhat.com>
4784 * infrun.c (follow_exec): Delete all threads of the process except
4785 the event thread. Extended comments.
4787 2015-03-02 Joel Brobecker <brobecker@adacore.com>
4789 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
4791 2015-03-02 Joel Brobecker <brobecker@adacore.com>
4793 * utils.h: Remove <stdbool.h> #include.
4794 (producer_is_gcc): Change return type to "int".
4795 * utils.c (producer_is_gcc): Change return type to int.
4796 Return 1 instead of true, and 0 instead of false.
4797 Adjust function documentation accordingly.
4799 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
4801 * s390-linux-nat.c (have_regset_vxrs): New static variable.
4802 (s390_linux_fetch_inferior_registers): Handle vector registers, if
4804 (s390_linux_store_inferior_registers): Likewise.
4805 (s390_get_hwcap): Remove function. Embed its logic...
4806 (s390_read_description): ...here. Yield a target description with
4807 vector registers if applicable.
4808 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
4809 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
4810 "features/s390x-tevx-linux64.c".
4811 (struct gdbarch_tdep) <v0_full_regnum>: New field.
4812 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
4813 for "GNU/Linux-specific registers".
4814 (s390_dwarf_reg_r0l): New enum value.
4815 (s390_dwarf_reg_to_regnum): Support vector registers.
4816 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
4817 of GPR lower halves.
4818 (regnum_is_vxr_full): New function.
4819 (s390_register_name): New function.
4820 (s390_pseudo_register_name): Handle v0-v15, which are composed of
4821 f0-f15 and v0l-v15l.
4822 (s390_pseudo_register_type): Likewise.
4823 (s390_pseudo_register_read): Likewise.
4824 (s390_pseudo_register_write): Likewise.
4825 (s390_value_from_register): Account for the fact that values are
4826 placed left-justified in vector registers.
4827 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
4828 the vector reggroup and omit them from the general reggroup.
4829 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
4830 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
4831 (s390_iterate_over_regset_sections): Add iterations for the two
4833 (s390_core_read_description): Yield a target description with
4834 vector registers if applicable.
4835 (s390_gdbarch_init): Handle target descriptions with vector
4836 registers. Add "register_name" gdbarch method.
4837 (_initialize_s390_tdep): Call new tdesc initialization functions.
4838 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
4839 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
4840 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
4841 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
4842 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
4843 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
4844 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
4845 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
4846 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
4847 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
4848 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
4849 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
4850 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
4851 (S390_NUM_REGS): Adjust value.
4852 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
4853 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
4854 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
4855 * NEWS: Announce S/390 vector register support.
4857 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
4859 * features/s390-tevx-linux64.xml: New file.
4860 * features/s390-vx-linux64.xml: New file.
4861 * features/s390-vx.xml: New file.
4862 * features/s390x-tevx-linux64.xml: New file.
4863 * features/s390x-vx-linux64.xml: New file.
4864 * features/Makefile (WHICH): Add s390-vx-linux64,
4865 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
4866 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
4867 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
4869 * features/s390-tevx-linux64.c: New generated file.
4870 * features/s390-vx-linux64.c: Likewise.
4871 * features/s390x-tevx-linux64.c: Likewise.
4872 * features/s390x-vx-linux64.c: Likewise.
4873 * regformats/s390-tevx-linux64.dat: Likewise.
4874 * regformats/s390-vx-linux64.dat: Likewise.
4875 * regformats/s390x-tevx-linux64.dat: Likewise.
4876 * regformats/s390x-vx-linux64.dat: Likewise.
4878 2015-02-28 Doug Evans <xdje42@gmail.com>
4880 * symtab.h (struct symtab) <next>: Fix comment.
4882 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
4884 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
4887 2015-02-27 Pedro Alves <palves@redhat.com>
4889 * dtrace-probe.c (dtrace_probe_ops): Make extern.
4891 2015-02-27 Pedro Alves <palves@redhat.com>
4893 * common/common-exceptions.h (exception_none): Declare.
4894 * common/common-exceptions.c (exception_none): Moved from
4896 (exceptions_state_mc_init): Use exception_none.
4897 * exceptions.c (exception_none): Move to
4898 common/common-exceptions.c.
4899 * exceptions.h (exception_none): Move to
4900 common/common-exceptions.h.
4902 2015-02-27 Pedro Alves <palves@redhat.com>
4904 * main.c (catch_command_errors, catch_command_errors_const):
4905 Remove 'mask' argument. Adjust.
4906 (captured_main): Adjust callers.
4908 2015-02-27 Pedro Alves <palves@redhat.com>
4910 * python/python-internal.h: Include "extension-priv.h".
4912 2015-02-27 Pedro Alves <palves@redhat.com>
4914 * breakpoint.h (enum print_stop_action): Move further up in the
4917 2015-02-27 Pedro Alves <palves@redhat.com>
4919 * gdbarch.sh: Include regcache.h.
4920 * gdbarch.h: Regenerate.
4922 2015-02-27 Pedro Alves <palves@redhat.com>
4924 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
4925 Remove duplicate const.
4926 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
4929 2015-02-27 Pedro Alves <palves@redhat.com>
4931 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
4932 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
4933 * features/feature_to_c.sh: Tag the generated xml_builtin array
4934 with extern const in C++ mode.
4936 2015-02-27 Tom Tromey <tromey@redhat.com>
4938 * minidebug.c (struct lzma_stream): Rename to ...
4939 (struct gdb_lzma_stream): ... this.
4940 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
4942 2015-02-27 Pedro Alves <palves@redhat.com>
4944 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
4946 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
4947 (mi_cmd_stack_list_variables): Use it.
4949 2015-02-27 Pedro Alves <palves@redhat.com>
4951 * x86-linux-nat.c (u_debugreg_offset): New function.
4952 (x86_linux_dr_get, x86_linux_dr_set): Use it.
4954 2015-02-27 Pedro Alves <palves@redhat.com>
4956 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
4958 Include break-common.h.
4960 2015-02-27 Tom Tromey <tromey@redhat.com>
4961 Pedro Alves <palves@redhat.com>
4963 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
4964 local used to iterate over enums.
4965 * completer.c (signal_completer): Likewise.
4966 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
4967 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
4968 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
4969 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
4970 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
4971 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
4972 * tui-wingeneral.c (tui_refresh_all): Likewise.
4974 2015-02-27 Pedro Alves <palves@redhat.com>
4976 * target.h: Include "infrun.h".
4978 2015-02-27 Pedro Alves <palves@redhat.com>
4980 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
4982 2015-02-27 Pedro Alves <palves@redhat.com>
4984 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
4986 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
4988 2015-02-27 Pedro Alves <palves@redhat.com>
4990 * cli-out.c (_rl_erase_entire_line): Move declaration out of
4991 cli_mld_erase_entire_line, and make it extern "C".
4992 * common/common-defs.h (EXTERN_C): New.
4993 * completer.c (_rl_completion_prefix_display_length)
4994 (_rl_print_completions_horizontally, QSFUNC): Move declarations
4995 out of gdb_display_match_list_1.
4996 (_rl_qsort_string_compare): Move declaration out of
4997 gdb_display_match_list_1, and make it extern "C".
4998 * defs.h (re_comp): Use EXTERN_C.
4999 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
5000 and make it extern "C".
5001 (monstartup): Move declaration out of maintenance_set_profile_cmd,
5002 and make it extern "C".
5003 (main): Move declaration out of maintenance_set_profile_cmd.
5004 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
5007 2015-02-27 Pedro Alves <palves@redhat.com>
5009 * python/python.c (GdbMethods): Rename to ...
5010 (python_GdbMethods): ... this and make extern.
5011 (GdbModuleDef): Rename to ...
5012 (python_GdbModuleDef): ... this and make extern.
5014 2015-02-27 Pedro Alves <palves@redhat.com>
5016 * record-btrace.c (set_record_btrace_cmdlist)
5017 (show_record_btrace_cmdlist): Remove redefinitions.
5019 2015-02-27 Tom Tromey <tromey@redhat.com>
5020 Pedro Alves <palves@redhat.com>
5022 * dwarf2-frame.c (enum cfa_how_kind, struct
5023 dwarf2_frame_state_reg_info): Move out of struct
5025 * dwarf2read.c (struct tu_stats): Move out of struct
5027 (struct file_entry): Move out of struct line_header.
5028 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
5029 typedef_field_list): Move out of struct field_info.
5030 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
5031 Move out of struct dynamic_prop.
5032 (union type_owner, union field_location, struct field, struct
5033 range_bounds, union type_specific): Move out of struct main_type.
5034 (struct fn_fieldlist, struct fn_field, struct typedef_field)
5035 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
5036 (struct call_site_target, union call_site_parameter_u, struct
5037 call_site_parameter): Move out of struct call_site.
5038 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
5040 (enum srcdest_kind): Move out of struct srcdest.
5041 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
5042 * prologue-value.h (enum prologue_value_kind): Move out of struct
5044 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
5046 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
5047 out of struct field_info.
5048 * symfile.h (struct other_sections): Move out of struct
5050 * symtab.c (struct symbol_cache_slot): Move out struct
5052 * target-descriptions.c (enum tdesc_type_kind): Move out of
5053 typedef struct tdesc_type.
5054 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
5055 struct tui_line_or_address.
5056 * value.c (enum internalvar_kind, union internalvar_data): Move
5057 out of struct internalvar.
5058 * xtensa-tdep.h (struct ctype_cache): Move out of struct
5061 2015-02-27 Tom Tromey <tromey@redhat.com>
5062 Pedro Alves <palves@redhat.com>
5064 Rename symbols whose names are reserved C++ keywords throughout.
5066 2015-02-27 Pedro Alves <palves@redhat.com>
5068 * Makefile.in (COMPILER): New, get it from autoconf.
5069 (COMPILE.pre, CC_LD): Use COMPILER.
5070 (CXX): Get from autoconf instead.
5071 (CXX_FOR_TARGET): Default to g++ instead of gcc.
5072 * acinclude.m4: Include build-with-cxx.m4.
5073 * build-with-cxx.m4: New file.
5074 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
5075 Disable -Werror by default if building in C++ mode.
5076 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
5077 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
5078 Run supported-warning-flags tests with the C++ compiler.
5079 Save/restore CXXFLAGS too.
5080 * configure: Regenerate.
5082 2015-02-27 Pedro Alves <palves@redhat.com>
5084 * libiberty.m4: New file.
5085 * acinclude.m4: Include libiberty.m4.
5086 * configure.ac: Call libiberty_INIT.
5087 * config.in, configure: Regenerate.
5089 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5091 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
5092 31-bit targets, but 64-bit targets as well.
5093 (s390_gnu_triplet_regexp): New function.
5094 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
5095 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
5098 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
5100 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
5101 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
5102 from CONTEXT_DEBUGGER.
5104 2015-02-26 Doug Evans <dje@google.com>
5106 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
5108 (set_type_vptr_fieldno): Ditto.
5109 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
5110 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
5112 2015-02-26 Pedro Alves <palves@redhat.com>
5114 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
5115 * complaints.c (vcomplaint): Pass argument FMT directly to
5116 printf-like functions instead of complaint->fmt.
5117 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
5118 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
5119 * compile/compile-loc2c.c (pushf, unary, binary): Add
5121 (do_compile_dwarf_expr_to_c): Pass string literal as format string
5123 (BINARY): Pass string literal as format string to 'binary'.
5124 * compile/compile-object-load.c (link_callbacks_einfo): Add
5126 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
5128 2015-02-26 Pedro Alves <palves@redhat.com>
5130 * windows-termcap.c: Rename to ...
5131 * stub-termcap.c: ... this. Adjust header line.
5132 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
5134 * configure: Regenerate.
5135 * configure.ac: Refer to stub-termcap.o instead of
5137 * gdb_curses.h: Mention stub-termcap.c instead of
5140 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
5142 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
5143 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
5145 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
5147 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
5149 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
5151 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
5152 bfd_canonicalize_symtab.
5154 2015-02-25 John Baldwin <jhb@FreeBSD.org>
5156 * amd64fbsd-nat.c: Include sys/user.h.
5157 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
5158 instead of KERN_PS_STRINGS to locate the signal trampoline.
5159 * i386fbsd-nat.c: Include sys/user.h.
5160 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
5161 instead of KERN_PS_STRINGS to locate the signal trampoline.
5162 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
5163 (amd64fbsd_sigtramp_p): New.
5164 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
5165 longer set default values.
5166 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
5167 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
5168 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
5169 (i386fbsd_freebsd4_sigtramp_start)
5170 (i386fbsd_freebsd4_sigtramp_middle)
5171 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
5172 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
5173 (i386fbsd_sigtramp_p): New.
5174 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
5175 longer set default values.
5176 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
5178 2015-02-25 John Baldwin <jhb@freebsd.org>
5180 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
5181 get_frame_register instead of frame_unwind_register_unsigned.
5183 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
5186 * compile/compile-c-support.c (c_compute_program): Change // comment.
5187 * compile/compile-object-load.c (setup_sections): Change // comment.
5189 2015-02-26 Joel Brobecker <brobecker@adacore.com>
5192 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
5194 2015-02-23 Pedro Alves <palves@redhat.com>
5196 * remote.c (skip_to_semicolon): New function.
5197 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
5198 special case the stop reasons that look like hex numbers
5199 upfront. Instead handle real register numbers after matching
5200 all the known stop reasons.
5202 2015-02-21 Doug Evans <dje@google.com>
5204 PR c++/17976, symtab/17821
5205 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
5206 is_in_anonymous. All callers updated.
5207 (find_symbol_in_baseclass): Ditto.
5208 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
5209 for symbols in an anonymous namespace.
5210 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
5211 DW_AT_name directly.
5212 (dwarf2_name): Convert missing namespace name to
5213 CP_ANONYMOUS_NAMESPACE_STR.
5215 2015-02-20 Pedro Alves <palves@redhat.com>
5217 * linux-nat.c (linux_handle_extended_wait): Call
5218 thread_db_notice_clone whenever a new clone LWP is detected.
5219 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
5221 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
5222 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
5223 (linux_unstop_all_lwps): Declare.
5224 * linux-thread-db.c (struct thread_get_info_inout): Delete.
5225 (thread_get_info_callback): Delete.
5226 (thread_from_lwp): Use td_thr_get_info and record_thread.
5227 (thread_db_attach_lwp): Delete.
5228 (thread_db_notice_clone): New function.
5229 (try_thread_db_load_1): If /proc is mounted and shows the
5230 process'es task list, walk over all LWPs and call thread_from_lwp
5231 instead of relying on td_ta_thr_iter.
5232 (attach_thread): Don't call check_thread_signals here. Split the
5233 tail part of the function (which adds the thread to the core GDB
5235 (record_thread): ... this function. Call check_thread_signals
5237 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
5238 call thread_from_lwp.
5239 (thread_db_update_thread_list): Rename to ...
5240 (thread_db_update_thread_list_org): ... this.
5241 (thread_db_update_thread_list): New function.
5242 (thread_db_find_thread_from_tid): Delete.
5243 (thread_db_get_ada_task_ptid): Simplify.
5244 * nat/linux-procfs.c: Include <sys/stat.h>.
5245 (linux_proc_task_list_dir_exists): New function.
5246 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
5248 2015-02-20 Pedro Alves <palves@redhat.com>
5250 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
5251 main LWP. Handle the case of waitpid returning 0 if we're already
5252 attached to the LWP. Don't set the LWP's last_resume_kind to
5253 resume_stop if we already knew about the LWP.
5254 (linux_nat_filter_event): Add debug logs.
5256 2015-02-20 Pedro Alves <palves@redhat.com>
5258 * target.h (forward_target_decr_pc_after_break): Delete
5261 2015-02-20 Pedro Alves <palves@redhat.com>
5264 * linux-thread-db.c (thread_get_info_callback): Return early if
5265 the thread's lwp id is -1.
5267 2015-02-20 Joel Brobecker <brobecker@adacore.com>
5271 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
5273 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
5274 (dtrace_get_probes) Change type of variable 'dof'.
5276 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
5278 PR breakpoints/16812
5279 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
5280 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
5281 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
5283 2015-02-19 David Taylor <dtaylor@emc.com>
5285 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
5287 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
5289 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
5291 (tui_putc): Don't call tui_handle_resize_during_io.
5292 (tui_getc): Likewise.
5293 (tui_mld_getc): Likewise.
5294 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
5295 (tui_sigwinch_token): New static variable.
5296 (tui_initialize_win): Adjust documentation. Set
5298 (tui_async_resize_screen): New asynchronous callback.
5299 (tui_sigwinch_handler): Adjust documentation. Asynchronously
5300 invoke tui_async_resize_screen.
5302 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
5304 * configure: Regenerated.
5305 * configure.ac: Use GDB_AC_TRANSFORM.
5306 * Makefile.in (aclocal_m4_deps): Added transform.m4.
5307 * acinclude.m4: sinclude transform.m4.
5308 * transform.m4: New file.
5309 (GDB_AC_TRANSFORM): New macro.
5311 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5313 * NEWS: Announce the support for DTrace SDT probes.
5315 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5317 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
5318 (amd64_dtrace_parse_probe_argument): New function.
5319 (amd64_dtrace_probe_is_enabled): Likewise.
5320 (amd64_dtrace_enable_probe): Likewise.
5321 (amd64_dtrace_disable_probe): Likewise.
5322 (amd64_linux_init_abi): Register the
5323 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
5324 `gdbarch_dtrace_disable_probe' and
5325 `gdbarch_dtrace_probe_is_enabled' hooks.
5326 (amd64_dtrace_disabled_probe_sequence_1): New constant.
5327 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
5328 (amd64_dtrace_enable_probe_sequence): Likewise.
5329 (amd64_dtrace_disable_probe_sequence): Likewise.
5331 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5333 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
5334 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
5335 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
5337 * Makefile.in (SFILES): dtrace-probe.c added.
5338 * configure: Regenerate.
5339 * dtrace-probe.c: New file.
5340 (SHT_SUNW_dof): New constant.
5341 (dtrace_probe_type): New enum.
5342 (dtrace_probe_arg): New struct.
5343 (dtrace_probe_arg_s): New typedef.
5344 (struct dtrace_probe_enabler): New struct.
5345 (dtrace_probe_enabler_s): New typedef.
5346 (dtrace_probe): New struct.
5347 (dtrace_probe_is_linespec): New function.
5348 (dtrace_dof_sect_type): New enum.
5349 (dtrace_dof_dofh_ident): Likewise.
5350 (dtrace_dof_encoding): Likewise.
5351 (DTRACE_DOF_ENCODE_LSB): Likewise.
5352 (DTRACE_DOF_ENCODE_MSB): Likewise.
5353 (dtrace_dof_hdr): New struct.
5354 (dtrace_dof_sect): Likewise.
5355 (dtrace_dof_provider): Likewise.
5356 (dtrace_dof_probe): Likewise.
5357 (DOF_UINT): New macro.
5358 (DTRACE_DOF_PTR): Likewise.
5359 (DTRACE_DOF_SECT): Likewise.
5360 (dtrace_process_dof_probe): New function.
5361 (dtrace_process_dof): Likewise.
5362 (dtrace_build_arg_exprs): Likewise.
5363 (dtrace_get_arg): Likewise.
5364 (dtrace_get_probes): Likewise.
5365 (dtrace_get_probe_argument_count): Likewise.
5366 (dtrace_can_evaluate_probe_arguments): Likewise.
5367 (dtrace_evaluate_probe_argument): Likewise.
5368 (dtrace_compile_to_ax): Likewise.
5369 (dtrace_probe_destroy): Likewise.
5370 (dtrace_gen_info_probes_table_header): Likewise.
5371 (dtrace_gen_info_probes_table_values): Likewise.
5372 (dtrace_probe_is_enabled): Likewise.
5373 (dtrace_probe_ops): New variable.
5374 (info_probes_dtrace_command): New function.
5375 (_initialize_dtrace_probe): Likewise.
5376 (dtrace_type_name): Likewise.
5378 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5380 * gdbarch.sh (dtrace_parse_probe_argument): New.
5381 (dtrace_probe_is_enabled): Likewise.
5382 (dtrace_enable_probe): Likewise.
5383 (dtrace_disable_probe): Likewise.
5384 * gdbarch.c: Regenerate.
5385 * gdbarch.h: Regenerate.
5387 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5389 * stap-probe.c (stap_probe_ops): Add NULLs in the static
5390 stap_probe_ops for `enable_probe' and `disable_probe'.
5391 * probe.c (enable_probes_command): New function.
5392 (disable_probes_command): Likewise.
5393 (_initialize_probe): Define the cli commands `enable probe' and
5395 (parse_probe_linespec): New function.
5396 (info_probes_for_ops): Use parse_probe_linespec.
5397 * probe.h (probe_ops): New hooks `enable_probe' and
5400 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5402 * probe.c (compute_probe_arg): Moved from stap-probe.c
5403 (compile_probe_arg): Likewise.
5404 (probe_funcs): Likewise.
5405 * stap-probe.c (compute_probe_arg): Moved to probe.c.
5406 (compile_probe_arg): Likewise.
5407 (probe_funcs): Likewise.
5409 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5411 * probe.c (print_ui_out_not_applicables): New function.
5412 (exists_probe_with_pops): Likewise.
5413 (info_probes_for_ops): Do not include column headers for probe
5414 types for which no probe has been actually found on any object.
5415 Also invoke `print_ui_out_not_applicables' in order to match the
5416 column rows with the header when probes of several types are
5418 Print the "Type" column.
5419 * probe.h (probe_ops): Added a new probe operation `type_name'.
5420 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
5421 (stap_type_name): New function.
5423 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
5425 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
5426 (key_is_command_char): Delete.
5428 2015-02-17 Pedro Alves <palves@redhat.com>
5430 * tui/tui.c (tui_enable): Resize windows before anything
5431 might show a window.
5433 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
5436 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
5437 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
5439 * aarch64-tdep.h (tdesc_aarch64): Declare.
5441 2015-02-12 Mark Wielaard <mjw@redhat.com>
5443 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
5445 2015-02-13 Doug Evans <dje@google.com>
5447 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
5448 anonymous_namespace to is_in_anonymous for consistency with the rest
5450 (cp_lookup_bare_symbol): Fix typo in comment.
5451 (cp_search_static_and_baseclasses): Ditto.
5452 (search_symbol_list): Use vertical space in comment better.
5453 (reset_directive_searched): Ditto. Fix typo.
5454 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
5456 2015-02-13 Yao Qi <yao.qi@arm.com>
5458 * MAINTAINERS: Update my email address.
5460 2015-02-12 Doug Evans <dje@google.com>
5462 * symtab.c (completion_list_add_name): Fix memory leak.
5464 2015-02-12 Doug Evans <dje@google.com>
5466 * completer.c (complete_line): Remove incorrect comment.
5468 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5470 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
5471 (py_print_frame): Use RETURN_MASK_ERROR.
5473 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5475 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
5476 function comment. Wrap all function that can throw in cleanups.
5477 (gdbpy_apply_frame_filter): Wrap all function that can throw in
5480 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5482 * python/py-framefilter.c (py_print_frame): Substitute goto error.
5483 Remove the error label.
5485 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5487 * python/py-framefilter.c (py_print_frame): Put conditional code paths
5488 with goto first, indent the former else codepath left. Put variable
5489 'elided' to a new inner block.
5491 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5493 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
5495 2015-02-11 Pedro Alves <palves@redhat.com>
5497 * xcoffread.c (within_function): Delete.
5499 2015-02-11 Tom Tromey <tromey@redhat.com>
5500 Pedro Alves <palves@redhat.com>
5502 * breakpoint.c (base_breakpoint_ops): Delete.
5503 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
5504 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
5505 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
5506 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
5507 * python/py-arch.c (arch_object_type): Make extern.
5508 * python/py-block.c (block_syms_iterator_object_type): Make extern.
5509 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
5510 * python/py-cmd.c (cmdpy_object_type): Make extern.
5511 * python/py-continueevent.c (continue_event_object_type)
5512 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
5513 parameter. Update all callers.
5514 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
5515 * python/py-exitedevent.c (exited_event_object_type): Make extern.
5516 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
5517 * python/py-function.c (fnpy_object_type): Make extern.
5518 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
5519 * python/py-infevents.c (call_pre_event_object_type)
5520 (inferior_call_post_event_object_type).
5521 (memory_changed_event_object_type): Make extern.
5522 * python/py-infthread.c (thread_object_type): Make extern.
5523 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
5524 * python/py-linetable.c (linetable_entry_object_type)
5525 (linetable_object_type, ltpy_iterator_object_type): Make extern.
5526 * python/py-newobjfileevent.c (new_objfile_event_object_type)
5527 (clear_objfiles_event_object_type): Make extern.
5528 * python/py-objfile.c (objfile_object_type): Make extern.
5529 * python/py-param.c (parmpy_object_type): Make extern.
5530 * python/py-progspace.c (pspace_object_type): Make extern.
5531 * python/py-signalevent.c (signal_event_object_type): Make extern.
5532 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
5533 * python/py-type.c (type_object_type, field_object_type)
5534 (type_iterator_object_type): Make extern.
5535 * python/python.c (python_extension_script_ops)
5536 (python_extension_ops): Make extern.
5537 * stap-probe.c (stap_probe_ops): Make extern.
5539 2015-02-11 Pedro Alves <pedro@codesourcery.com>
5541 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
5542 because the event thread is not the current thread.
5544 2015-02-11 Doug Evans <xdje42@gmail.com>
5546 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
5547 been initialized yet, return NULL.
5549 2015-02-11 Doug Evans <dje@google.com>
5551 * symfile.h (new_symfile_objfile): Delete.
5552 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
5553 All callers updated.
5555 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
5557 * tui/tui-io.c (tui_handle_resize_during_io): Call
5558 tui_update_gdb_sizes() after resizing the screen.
5559 * tui/tui.c (tui_enable): Resize the terminal before
5560 calling tui_update_gdb_sizes().
5562 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
5564 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
5565 line before printing a newline.
5567 2015-02-11 Mark Wielaard <mjw@redhat.com>
5569 * utils.c (producer_is_gcc): Return true or false.
5571 2015-02-10 Mark Wielaard <mjw@redhat.com>
5573 * utils.h (producer_is_gcc): Change return type to bool. Add major
5575 * utils.c (producer_is_gcc): Likewise.
5576 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
5577 * dwarf2read.c (check_producer): Likewise.
5579 2015-02-10 Pedro Alves <palves@redhat.com>
5581 * infrun.c (displaced_step_fixup): Switch to the event thread
5582 before calling gdbarch_displaced_step_fixup.
5584 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
5586 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
5588 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
5590 * ada-varobj.c (ada_name_of_child): Constify parent.
5591 (ada_path_expr_of_child): Same.
5592 (ada_value_of_child): Same.
5593 (ada_type_of_child): Same.
5594 * c-varobj.c (c_is_path_expr_parent): Same.
5595 (c_describe_child): Same.
5596 (c_name_of_child): Same.
5597 (c_value_of_child): Same.
5598 (c_type_of_child): Same.
5599 (cplus_number_of_children): Same.
5600 (cplus_describe_child): Constify var.
5601 (cplus_name_of_child): Constify parent.
5602 (cplus_value_of_child): Same.
5603 (cplus_type_of_child): Same.
5604 * jv-varobj.c (java_name_of_child): Same.
5605 (java_value_of_child): Same.
5606 (java_type_of_child): Same.
5607 * varobj.c (value_of_child): Same.
5608 (varobj_default_is_path_expr_parent): Constify var, parent and return
5610 (varobj_get_path_expr): Constify var, modify path_expr through
5612 (install_new_value): Constify parent.
5613 (value_of_child): Constify parent.
5614 * varobj.h (struct varobj): Constify parent.
5615 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
5617 (varobj_get_path_expr): Constify var.
5618 (varobj_get_path_expr_parent): Constify var and return value.
5620 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
5622 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
5623 (arm_prologue_this_id): Move PC and SP limit checks to
5624 arm_prologue_unwind_stop_reason.
5625 (arm_prologue_unwind) <stop_reason> : Set to
5626 arm_prologue_unwind_stop_reason.
5628 2015-02-09 Mark Wielaard <mjw@redhat.com>
5630 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
5631 DW_LANG_Fortran08 as language_fortran.
5633 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
5636 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
5637 of pointer against char.
5639 2015-02-09 Mark Wielaard <mjw@redhat.com>
5641 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
5642 (c_type_print_modifier): Likewise.
5643 * dwarf2read.c (read_tag_atomic_type): New function.
5644 (read_type_die_1): Handle DW_TAG_atomic_type.
5645 * gdbtypes.c (make_atomic_type): New function.
5646 (recursive_dump_type): Handle TYPE_ATOMIC.
5647 * gdbtypes.h (enum type_flag_values): Renumber.
5648 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
5649 (TYPE_ATOMIC): New macro.
5650 (make_atomic_type): Declare.
5652 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5654 * btrace.c (ftrace_find_call): Skip gaps.
5655 (ftrace_new_function): Initialize level.
5656 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
5657 (ftrace_new_switch): Update
5659 (ftrace_new_gap): New.
5660 (ftrace_update_function): Create new function after gap.
5661 (btrace_compute_ftrace_bts): Create gap on error.
5662 (btrace_stitch_bts): Update parameters. Clear trace if it
5664 (btrace_stitch_trace): Update parameters. Update callers.
5665 (btrace_clear): Reset the number of gaps.
5666 (btrace_insn_get): Return NULL if the iterator points to a gap.
5667 (btrace_insn_number): Return zero if the iterator points to a gap.
5668 (btrace_insn_end): Allow gaps at the end.
5669 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
5670 (btrace_find_insn_by_number): Assert that the found iterator does
5672 (btrace_call_next, btrace_call_prev): Assert that the last function
5674 * btrace.h (btrace_bts_error): New.
5675 (btrace_function): Update comment.
5676 (btrace_function) <insn, insn_offset, number>: Update comment.
5677 (btrace_function) <errcode>: New.
5678 (btrace_thread_info) <ngaps>: New.
5679 (btrace_thread_info) <replay>: Update comment.
5680 (btrace_insn_get): Update comment.
5681 * record-btrace.c (btrace_ui_out_decode_error): New.
5682 (record_btrace_info): Print number of gaps.
5683 (btrace_insn_history, btrace_call_history): Call
5684 btrace_ui_out_decode_error for gaps.
5685 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
5687 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5689 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
5690 * nat/linux-btrace.c: (btrace_this_cpu): New.
5691 (cpu_supports_bts): Call btrace_this_cpu.
5692 (intel_supports_bts): Add cpu parameter.
5694 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5696 * btrace.h (btrace_insn_class): New.
5697 (btrace_insn) <size, iclass>: New.
5698 * btrace.c (ftrace_find_call): Update parameters. Update users.
5699 Use instruction classification.
5700 (ftrace_new_return): Update parameters. Update users.
5701 (ftrace_update_function): Update parameters. Update users. Use
5702 instruction classification.
5703 (ftrace_update_insns): Update parameters. Update users.
5704 (ftrace_classify_insn): New.
5705 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
5706 TRY_CATCH around call to gdb_insn_length.
5708 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5710 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
5711 Update parameters. Update users.
5713 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5715 * btrace.c (parse_xml_btrace_conf_bts): Add size.
5716 (btrace_conf_bts_attributes): New.
5717 (btrace_conf_children): Add attributes.
5718 * common/btrace-common.h (btrace_config_bts): New.
5719 (btrace_config)<bts>: New.
5720 (btrace_config): Update comment.
5721 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
5723 * features/btrace-conf.dtd: Increment version. Add size
5724 attribute to bts element.
5725 * record-btrace.c (set_record_btrace_bts_cmdlist,
5726 show_record_btrace_bts_cmdlist): New.
5727 (record_btrace_adjust_size, record_btrace_print_bts_conf,
5728 record_btrace_print_conf, cmd_set_record_btrace_bts,
5729 cmd_show_record_btrace_bts): New.
5730 (record_btrace_info): Call record_btrace_print_conf.
5731 (_initialize_record_btrace): Add commands.
5732 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
5733 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
5734 (btrace_sync_conf): Synchronize bts size.
5735 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
5736 * NEWS: Announce new commands and new packets.
5738 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5740 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
5741 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
5742 (x86_linux_btrace_conf): New.
5743 (x86_linux_create_target): Initialize to_btrace_conf.
5744 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
5745 Check format. Split into this and ...
5746 (linux_enable_bts): ... this.
5747 (linux_btrace_conf): New.
5748 (perf_event_skip_record): Renamed into ...
5749 (perf_event_skip_bts_record): ... this. Updated users.
5750 (linux_disable_btrace): Split into this and ...
5751 (linux_disable_bts): ... this.
5752 (linux_read_btrace): Check format.
5753 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
5754 (linux_btrace_conf): New.
5755 (btrace_target_info)<ptid>: Moved.
5756 (btrace_target_info)<conf>: New.
5757 (btrace_target_info): Split into this and ...
5758 (btrace_tinfo_bts): ... this. Updated users.
5759 * btrace.c (btrace_enable): Update parameters.
5760 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
5761 (btrace_conf_children, btrace_conf_attributes)
5762 (btrace_conf_elements): New.
5763 * btrace.h (btrace_enable): Update parameters.
5764 (btrace_conf, parse_xml_btrace_conf): New.
5765 * common/btrace-common.h (btrace_config): New.
5766 * feature/btrace-conf.dtd: New.
5767 * record-btrace.c (record_btrace_conf): New.
5768 (record_btrace_cmdlist): New.
5769 (record_btrace_enable_warn, record_btrace_open): Pass
5770 &record_btrace_conf.
5771 (record_btrace_info): Print recording format.
5772 (cmd_record_btrace_bts_start): New.
5773 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
5774 (_initialize_record_btrace): Add "record btrace bts" subcommand.
5775 Add "record bts" alias command.
5776 * remote.c (remote_state)<btrace_config>: New.
5777 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
5778 (remote_protocol_features): Add qXfer:btrace-conf:read.
5779 (remote_open_1): Call remote_btrace_reset.
5780 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
5781 (btrace_target_info)<conf>: New.
5782 (btrace_sync_conf, btrace_read_config): New.
5783 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
5785 (remote_btrace_conf): New.
5786 (init_remote_ops): Initialize to_btrace_conf.
5787 (_initialize_remote): Add qXfer:btrace-conf packet.
5788 * target.c (target_enable_btrace): Update parameters.
5789 (target_btrace_conf): New.
5790 * target.h (target_enable_btrace): Update parameters.
5791 (target_btrace_conf): New.
5792 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
5793 (target_ops)<to_enable_btrace>: Update parameters and comment.
5794 (target_ops)<to_btrace_conf>: New.
5795 * target-delegates: Regenerate.
5796 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
5797 (target_debug_print_const_struct_btrace_target_info_p): New.
5798 * NEWS: Announce new command and new packet.
5800 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5802 * nat/linux-btrace.h (perf_event_buffer): New.
5803 (btrace_target_info) <buffer, size, data_head>: Replace with ...
5805 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
5806 (perf_event_buffer_size, perf_event_buffer_begin)
5807 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
5809 (perf_event_new_data): New.
5811 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5813 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
5814 * record-btrace.c (record_btrace_open): Remove call to
5815 target_supports_btrace.
5816 * remote.c (remote_supports_btrace): Update parameters.
5817 * target.c (target_supports_btrace): Update parameters.
5818 * target.h (to_supports_btrace, target_supports_btrace): Update
5820 * target-delegates.c: Regenerate.
5821 * target-debug.h (target_debug_print_enum_btrace_format): New.
5822 * nat/linux-btrace.c
5823 (kernel_supports_btrace): Rename into ...
5824 (kernel_supports_bts): ... this. Update users. Update warning text.
5825 (intel_supports_btrace): Rename into ...
5826 (intel_supports_bts): ... this. Update users.
5827 (cpu_supports_btrace): Rename into ...
5828 (cpu_supports_bts): ... this. Update users.
5829 (linux_supports_btrace): Update parameters. Split into this and ...
5830 (linux_supports_bts): ... this.
5831 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
5833 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5835 * Makefile.in (SFILES): Add common/btrace-common.c.
5836 (COMMON_OBS): Add common/btrace-common.o.
5837 (btrace-common.o): Add build rules.
5838 * btrace.c (parse_xml_btrace): Update parameters.
5839 (parse_xml_btrace_block): Set format field.
5840 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
5841 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
5842 (btrace_compute_ftrace): Split into this and...
5843 (btrace_compute_ftrace_bts): ...this.
5844 (btrace_stitch_trace): Split into this and...
5845 (btrace_stitch_bts): ...this.
5846 * btrace.h (parse_xml_btrace): Update parameters.
5847 (make_cleanup_btrace_data): New.
5848 * common/btrace-common.c: New.
5849 * common/btrace-common.h: Include common-defs.h.
5850 (btrace_block_s): Update comment.
5851 (btrace_format): New.
5852 (btrace_format_string): New.
5853 (btrace_data_bts): New.
5855 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
5856 * remote.c (remote_read_btrace): Update parameters.
5857 * target.c (target_read_btrace): Update parameters.
5858 * target.h (target_read_btrace): Update parameters.
5859 (target_ops)<to_read_btrace>: Update parameters.
5860 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
5861 * target-delegates.c: Regenerate.
5862 * target-debug (target_debug_print_struct_btrace_data_p): New.
5863 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
5864 (linux_read_bts): ...this.
5865 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
5867 2015-02-06 Doug Evans <dje@google.com>
5869 * remote-m32r-sdi.c: Include symfile.h.
5871 2015-02-06 Doug Evans <dje@google.com>
5873 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
5874 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
5877 2015-02-06 Pedro Alves <palves@redhat.com>
5879 * linux-thread-db.c (find_new_threads_callback): Add debug output.
5881 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
5884 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
5885 (enable_count_command): Check args for NULL value.
5887 2015-02-05 Doug Evans <xdje42@gmail.com>
5889 * guile/scm-frame.c: Fix spelling errors in a comment.
5891 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
5893 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
5894 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
5897 2015-02-04 Pedro Alves <palves@redhat.com>
5899 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
5900 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
5902 (resume_stopped_resumed_lwps): Don't check whether the thread is
5903 marked as executing.
5904 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
5906 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5908 * regset.h (struct regset): Add flags field.
5909 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
5910 * corelow.c (get_core_register_section): Add warning if the size
5911 exceeds the requested size and the regset does not have the
5912 REGSET_VARIABLE_SIZE flag set.
5913 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
5915 * armbsd-tdep.c (armbsd_gregset): Likewise.
5916 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
5917 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
5918 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
5919 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
5921 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5923 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
5924 For ".reg-xstate", explicitly specify the requested section size
5925 via X86_XSTATE_SIZE instead of just 0 on input and
5926 X86_XSTATE_MAX_SIZE on output.
5927 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
5930 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5933 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
5934 function type, particularly its SIZE parameter.
5935 * gdbarch.h: Regenerate.
5936 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
5937 actual against required size using ">=" instead of "==".
5938 (amd64_collect_fpregset): Likewise.
5939 * i386-tdep.c (i386_supply_gregset): Likewise.
5940 (i386_collect_gregset): Likewise.
5941 (i386_supply_fpregset): Likewise.
5942 (i386_collect_fpregset): Likewise.
5943 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
5944 (mips_fill_gregset_wrapper): Likewise.
5945 (mips_supply_fpregset_wrapper): Likewise.
5946 (mips_fill_fpregset_wrapper): Likewise.
5947 (mips64_supply_gregset_wrapper): Likewise.
5948 (mips64_fill_gregset_wrapper): Likewise.
5949 (mips64_supply_fpregset_wrapper): Likewise.
5950 (mips64_fill_fpregset_wrapper): Likewise.
5951 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
5952 (am33_supply_fpregset_method): Likewise.
5953 (am33_collect_gregset_method): Likewise.
5954 (am33_collect_fpregset_method): Likewise.
5956 2015-02-04 Doug Evans <dje@google.com>
5957 Pedro Alves <palves@redhat.com>
5958 Eli Zaretskii <eliz@gnu.org>
5961 * tui/tui-command.c (tui_refresh_cmd_win): New function.
5962 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
5963 * tui/tui-file.c: #include tui/tui-command.h.
5964 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
5965 (tui_file_flush): Refresh command window if stream is gdb_stdout.
5966 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
5968 2015-02-04 Pedro Alves <palves@redhat.com>
5971 * event-loop.c (gdb_do_one_event): Add default switch case.
5973 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
5975 Filter out inferior gcc option -fpreprocessed.
5976 * compile/compile.c (filter_args): New function.
5979 2015-02-03 Pedro Alves <palves@redhat.com>
5981 * event-loop.c: Don't declare nor define a queue type for
5983 (event_queue): Delete.
5984 (create_event, create_file_event, gdb_event_xfree)
5985 (initialize_event_loop, process_event): Delete.
5986 (gdb_do_one_event): Return as soon as one event is handled.
5987 (handle_file_event): Change prototype. Used the passed in
5988 file_handler pointer and ready_mask instead of looping over all
5990 (gdb_wait_for_event): Update the poll/select timeouts before
5991 blocking. Run event handlers directly instead of queueing events.
5992 Return as soon as one event is handled.
5993 (struct async_event_handler_data): Delete.
5994 (invoke_async_event_handler): Delete.
5995 (check_async_event_handlers): Change return type to int. Run
5996 event handlers directly instead of queueing events. Return as
5997 soon as one event is handled.
5998 (handle_timer_event): Delete.
5999 (update_wait_timeout): New function, factored out from
6001 (poll_timers): Reimplement.
6002 * event-loop.h (initialize_event_loop): Delete declaration.
6003 * top.c (gdb_init): Don't call initialize_event_loop.
6005 2015-02-03 Pedro Alves <palves@redhat.com>
6007 * event-loop.c (clear_async_event_handler): New function.
6008 * event-loop.h (clear_async_event_handler): New declaration.
6009 * record-btrace.c (record_btrace_async): New function.
6010 (init_record_btrace_ops): Install record_btrace_async.
6011 * record-full.c (record_full_async): New function.
6012 (record_full_resume): Don't mark the async event source here.
6013 (init_record_full_ops): Install record_full_async.
6014 (record_full_core_resume): Don't mark the async event source here.
6015 (init_record_full_core_ops): Install record_full_async.
6016 * remote.c (remote_async): Mark and clear the async stop reply
6017 queue event-loop token as appropriate.
6019 2015-02-03 Pedro Alves <palves@redhat.com>
6021 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
6022 target_is_async_p instead of target_can_async.
6023 (linux_nat_wait): Use target_is_async_p instead of
6024 target_can_async. Don't enable async here.
6025 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
6026 target_is_async_p instead of target_can_async.
6028 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
6030 * varobj.h (lang_varobj_ops): Mention which return values need
6033 2015-02-02 Joel Brobecker <brobecker@adacore.com>
6035 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
6037 2015-02-02 Joel Brobecker <brobecker@adacore.com>
6040 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
6041 results found in the cache.
6043 2015-02-02 Joel Brobecker <brobecker@adacore.com>
6046 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
6047 when allocating a new one.
6049 2015-02-01 Tom Tromey <tom@tromey.com>
6051 * MAINTAINERS: Remove myself.
6053 2015-01-31 Doug Evans <xdje42@gmail.com>
6055 * dwarf2read.c (process_structure_scope): Update setting of
6056 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
6057 * gdbtypes.c (internal_type_vptr_fieldno): New function.
6058 (set_type_vptr_fieldno): New function.
6059 (internal_type_vptr_basetype): New function.
6060 (set_type_vptr_basetype): New function.
6061 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
6063 (allocate_cplus_struct_type): Initialize vptr_fieldno.
6064 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
6065 (print_cplus_stuff): ... moved here.
6066 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
6067 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
6069 (struct cplus_struct_type): ... here. All uses updated.
6070 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
6071 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
6072 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
6073 * stabsread.c (read_tilde_fields): Update setting of
6074 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
6076 2015-01-31 Doug Evans <xdje42@gmail.com>
6078 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
6080 (cp_print_class_member): Rename local domain to self_type.
6081 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
6082 domain_type to self_type.
6083 (set_die_type) <need_gnat_info>: Handle
6084 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
6085 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
6086 TYPE_SPECIFIC_SELF_TYPE.
6087 * gdbtypes.c (internal_type_self_type): New function.
6088 (set_type_self_type): New function.
6089 (smash_to_memberptr_type): Rename parameter domain to self_type.
6090 Update setting of TYPE_SELF_TYPE.
6091 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
6092 (smash_to_method_type): Rename parameter domain to self_type.
6093 Update setting of TYPE_SELF_TYPE.
6094 (check_stub_method): Call smash_to_method_type.
6095 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
6096 (copy_type_recursive): Ditto.
6097 * gdbtypes.h (enum type_specific_kind): New value
6098 TYPE_SPECIFIC_SELF_TYPE.
6099 (struct main_type) <type_specific>: New member self_type.
6100 (struct cplus_struct_type) <fn_field.type>: Update comment.
6101 (TYPE_SELF_TYPE): Rewrite.
6102 (internal_type_self_type, set_type_self_type): Declare.
6103 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
6105 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
6106 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
6108 * stabsread.c (read_member_functions): Mark methods with
6109 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
6112 2015-01-31 Doug Evans <xdje42@gmail.com>
6114 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
6117 2015-01-31 Doug Evans <xdje42@gmail.com>
6119 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
6120 or unions. Return zero if union.
6121 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
6122 (gnuv3_rtti_type): Pass already-check_typedef'd value to
6124 (compute_vtable_size): Assert only passed structs.
6125 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
6127 2015-01-31 Doug Evans <xdje42@gmail.com>
6129 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
6132 2015-01-31 Gary Benson <gbenson@redhat.com>
6133 Doug Evans <dje@google.com>
6138 * cli/cli-cmds.c (complete_command): Notify user if max-completions
6140 * common/common-exceptions.h (enum errors)
6141 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
6142 * completer.h (get_max_completions_reached_message): New declaration.
6143 (max_completions): Likewise.
6144 (completion_tracker_t): New typedef.
6145 (new_completion_tracker): New declaration.
6146 (make_cleanup_free_completion_tracker): Likewise.
6147 (maybe_add_completion_enum): New enum.
6148 (maybe_add_completion): New declaration.
6149 (throw_max_completions_reached_error): Likewise.
6150 * completer.c (max_completions): New global variable.
6151 (new_completion_tracker): New function.
6152 (free_completion_tracker): Likewise.
6153 (make_cleanup_free_completion_tracker): Likewise.
6154 (maybe_add_completions): Likewise.
6155 (throw_max_completions_reached_error): Likewise.
6156 (complete_line): Remove duplicates and limit result to max_completions
6158 (get_max_completions_reached_message): New function.
6159 (gdb_display_match_list): Handle max_completions.
6160 (_initialize_completer): New declaration and function.
6161 * symtab.c: Include completer.h.
6162 (completion_tracker): New static variable.
6163 (completion_list_add_name): Call maybe_add_completion.
6164 (default_make_symbol_completion_list_break_on_1): Renamed from
6165 default_make_symbol_completion_list_break_on. Maintain
6166 completion_tracker across calls to completion_list_add_name.
6167 (default_make_symbol_completion_list_break_on): New function.
6168 * top.c (init_main): Set rl_completion_display_matches_hook.
6169 * tui/tui-io.c: Include completer.h.
6170 (tui_old_rl_display_matches_hook): New static global.
6171 (tui_rl_display_match_list): Notify user if max-completions reached.
6172 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
6173 * NEWS (New Options): Mention set/show max-completions.
6175 2015-01-31 Gary Benson <gbenson@redhat.com>
6177 * symtab.c (struct add_name_data) <code>: New field.
6179 (add_symtab_completions): New function.
6180 (symtab_expansion_callback): Likewise.
6181 (default_make_symbol_completion_list_break_on): Set datum.code.
6182 Move minimal symbol scan before calling expand_symtabs_matching.
6183 Scan known primary symtabs for externs and statics before calling
6184 expand_symtabs_matching. Pass symtab_expansion_callback as
6185 expansion_notify argument to expand_symtabs_matching. Do not scan
6186 primary symtabs for externs and statics after calling
6187 expand_symtabs_matching.
6189 2015-01-31 Gary Benson <gbenson@redhat.com>
6191 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
6192 (struct quick_symbol_functions) <expand_symtabs_matching>:
6193 New argument expansion_notify. All uses updated.
6194 (expand_symtabs_matching): New argument expansion_notify.
6196 * symfile-debug.c (debug_qf_expand_symtabs_matching):
6197 Also print expansion notify.
6198 * symtab.c (expand_symtabs_matching_via_partial): Call
6199 expansion_notify whenever a partial symbol table is expanded.
6200 * dwarf2read.c (dw2_expand_symtabs_matching): Call
6201 expansion_notify whenever a symbol table is instantiated.
6203 2015-01-31 Doug Evans <xdje42@gmail.com>
6205 * cli-out.c: #include completer.h, readline/readline.h.
6206 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
6207 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
6208 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
6209 * cli-out.h (cli_display_match_list): Declare.
6210 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
6211 (ELLIPSIS_LEN): Ditto.
6212 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
6213 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
6214 (gdb_fnprint, gdb_print_filename): Ditto.
6215 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
6216 (gdb_display_match_list): Ditto.
6217 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
6218 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
6219 (mld_beep_ftype, mld_read_key_ftype): Ditto.
6220 (match_list_displayer): New struct.
6221 (gdb_display_match_list): Declare.
6222 * top.c (init_main): Set rl_completion_display_matches_hook.
6223 * tui/tui-io.c: #include completer.h.
6224 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
6225 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
6226 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
6227 (tui_mld_getc, tui_mld_read_key): Ditto.
6228 (tui_rl_display_match_list): Rewrite.
6229 (tui_handle_resize_during_io): New arg for_completion. All callers
6232 2015-01-31 Doug Evans <xdje42@gmail.com>
6234 Add symbol lookup cache.
6235 * NEWS: Document new options and commands.
6236 * symtab.c (symbol_cache_key): New static global.
6237 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
6238 (SYMBOL_LOOKUP_FAILED): New macro.
6239 (symbol_cache_slot_state): New enum.
6240 (block_symbol_cache): New struct.
6241 (symbol_cache): New struct.
6242 (new_symbol_cache_size, symbol_cache_size): New static globals.
6243 (hash_symbol_entry, eq_symbol_entry): New functions.
6244 (symbol_cache_byte_size, resize_symbol_cache): New functions.
6245 (make_symbol_cache, free_symbol_cache): New functions.
6246 (get_symbol_cache, symbol_cache_cleanup): New function.
6247 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
6248 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
6249 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
6250 (symbol_cache_flush, symbol_cache_dump): New functions.
6251 (maintenance_print_symbol_cache): New function.
6252 (maintenance_flush_symbol_cache): New function.
6253 (symbol_cache_stats): New function.
6254 (maintenance_print_symbol_cache_statistics): New function.
6255 (symtab_new_objfile_observer): New function.
6256 (symtab_free_objfile_observer): New function.
6257 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
6258 (_initialize_symtab): Init symbol_cache_key. New parameter
6259 maint symbol-cache-size. New maint commands print symbol-cache,
6260 print symbol-cache-statistics, flush-symbol-cache.
6261 Install new_objfile, free_objfile observers.
6263 2015-01-31 Joel Brobecker <brobecker@adacore.com>
6266 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
6269 2015-01-31 Doug Evans <xdje42@gmail.com>
6271 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
6272 * auto-load.c: #include ctype.h.
6273 (struct auto_load_pspace_info): Replace member loaded_scripts with
6274 new members loaded_script_files, loaded_script_texts.
6275 (auto_load_pspace_data_cleanup): Update.
6276 (init_loaded_scripts_info): Update.
6277 (get_auto_load_pspace_data_for_loading): Update.
6278 (maybe_add_script_file): Renamed from maybe_add_script. All callers
6280 (maybe_add_script_text): New function.
6281 (clear_section_scripts): Update.
6282 (source_script_file, execute_script_contents): New functions.
6283 (source_section_scripts): Add support for
6284 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
6285 (print_scripts): New function.
6286 (auto_load_info_scripts): Also print inlined scripts.
6287 (maybe_print_unsupported_script_warning): Renamed from
6288 unsupported_script_warning_print. All callers updated.
6289 (maybe_print_script_not_found_warning): Renamed from
6290 script_not_found_warning_print. All callers updated.
6291 * extension-priv.h (struct extension_language_script_ops): New member
6292 objfile_script_executor.
6293 * extension.c (ext_lang_objfile_script_executor): New function.
6294 * extension.h (objfile_script_executor_func): New typedef.
6295 (ext_lang_objfile_script_executor): Declare.
6296 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
6297 * guile/guile.c (guile_extension_script_ops): Update.
6298 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
6299 * python/python.c (python_extension_script_ops): Update.
6300 (gdbpy_execute_objfile_script): New function.
6302 2015-01-31 Eli Zaretskii <eliz@gnu.org>
6304 * tui/tui-io.c (tui_expand_tabs): New function.
6305 (tui_puts, tui_redisplay_readline): Expand TABs into the
6306 appropriate number of spaces.
6307 * tui/tui-regs.c: Include tui-io.h.
6308 (tui_register_format): Call tui_expand_tabs to expand TABs into
6309 the appropriate number of spaces.
6310 * tui/tui-io.h: Add prototype for tui_expand_tabs.
6312 2015-01-30 Doug Evans <dje@google.com>
6314 * NEWS: "info source" command now display producer string if present.
6315 * source.c (source_info): Print producer string if present.
6317 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6319 * varobj.c (varobj_delete): Fix comment.
6321 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6323 * varobj.c (create_child): Modify comment.
6325 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6327 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
6329 (ada_name_of_variable): Same.
6330 (ada_path_expr_of_child): Same.
6331 (ada_value_of_variable): Same.
6332 (ada_value_is_changeable_p): Same.
6333 (ada_value_has_mutated): Same.
6334 * c-varobj.c (varobj_is_anonymous_child): Same.
6335 (c_is_path_expr_parent): Same.
6336 (c_number_of_children): Same.
6337 (c_name_of_variable): Same.
6338 (c_path_expr_of_child): Same.
6340 (c_value_of_variable): Same.
6341 (cplus_number_of_children): Same.
6342 (cplus_name_of_variable): Same.
6343 (cplus_path_expr_of_child): Same.
6344 (cplus_value_of_variable): Same.
6345 * jv-varobj.c (java_number_of_children): Same.
6346 (java_name_of_variable): Same.
6347 (java_path_expr_of_child): Same.
6348 (java_value_of_variable): Same.
6349 * varobj.c (number_of_children): Same.
6350 (name_of_variable): Same.
6352 (varobj_ensure_python_env): Same.
6353 (varobj_get_objname): Same.
6354 (varobj_get_expression): Same.
6355 (varobj_get_display_format): Same.
6356 (varobj_get_display_hint): Same.
6357 (varobj_has_more): Same.
6358 (varobj_get_thread_id): Same.
6359 (varobj_get_frozen): Same.
6360 (dynamic_varobj_has_child_method): Same.
6361 (varobj_get_gdb_type): Same.
6362 (is_path_expr_parent): Same.
6363 (varobj_default_is_path_expr_parent): Same.
6364 (varobj_get_language): Same.
6365 (varobj_get_attributes): Same.
6366 (varobj_is_dynamic_p): Same.
6367 (varobj_get_child_range): Same.
6368 (varobj_value_has_mutated): Same.
6369 (varobj_get_value_type): Same.
6370 (number_of_children): Same.
6371 (name_of_variable): Same.
6372 (check_scope): Same.
6373 (varobj_editable_p): Same.
6374 (varobj_value_is_changeable_p): Same.
6375 (varobj_floating_p): Same.
6376 (varobj_default_value_is_changeable_p): Same.
6378 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6380 * varobj.c (varobj_get_path_expr): Set var->path_expr.
6381 * c-varobj.c (c_path_expr_of_child): Set local var instead of
6383 (cplus_path_expr_of_child): Same.
6385 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6387 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
6389 (mi_cmd_var_info_expression): Same.
6390 * varobj.c (varobj_get_expression): Mention in the comment that
6391 the result must by freed by the caller.
6393 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6395 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
6397 (varobj_update_one): Same.
6398 * varobj.c (update_type_if_necessary): Free curr_type_str and
6400 (varobj_get_type): Specify in comment that the result needs to be
6401 freed by the caller.
6403 2015-01-29 Doug Evans <dje@google.com>
6406 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
6408 2015-01-25 Mark Wielaard <mjw@redhat.com>
6410 * dwarf2read.c (checkproducer): Call producer_is_gcc.
6411 * utils.c (producer_is_gcc_ge_4): Likewise.
6412 (producer_is_gcc): New function.
6413 * utils.h (producer_is_gcc): New declaration.
6415 2015-01-29 Joel Brobecker <brobecker@adacore.com>
6417 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
6419 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
6420 parameter by "addr_stack" parameter.
6421 (resolve_dynamic_range): Replace "addr" parameter by
6422 "stack_addr" parameter. Update function documentation.
6423 Update code accordingly.
6424 (resolve_dynamic_array, resolve_dynamic_union)
6425 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
6426 (resolve_dynamic_type): Update code, following the changes made
6427 to resolve_dynamic_type_internal's interface.
6428 * dwarf2loc.h (struct property_addr_info): New.
6429 (dwarf2_evaluate_property): Replace "address" parameter
6430 by "addr_stack" parameter. Adjust function documentation.
6431 (struct dwarf2_offset_baton): New.
6432 (struct dwarf2_property_baton): Update documentation of
6433 field "referenced_type" to be more general. New field
6434 "offset_info" in union data field.
6435 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
6436 parameter by "addr_stack" parameter. Adjust code accordingly.
6437 Add support for PROP_ADDR_OFFSET properties.
6438 * dwarf2read.c (attr_to_dynamic_prop): Add support for
6439 DW_AT_data_member_location attributes as well. Use case
6440 statements instead of if/else condition.
6442 2015-01-29 Joel Brobecker <brobecker@adacore.com>
6444 * ada-varobj.c (ada_varobj_get_array_number_of_children):
6445 Return zero if PARENT_VALUE is NULL and parent_type's
6446 range type is dynamic.
6448 2015-01-29 Joel Brobecker <brobecker@adacore.com>
6450 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
6451 nonzero if the type's subtype is dynamic.
6452 (resolve_dynamic_range): Also resolve the range's subtype.
6454 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
6456 Pushed by Joel Brobecker <brobecker@adacore.com>.
6457 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
6459 2015-01-27 Doug Evans <dje@google.com>
6461 * NEWS: Mention gdb.Objfile.username.
6462 * python/py-objfile.c (objfpy_get_username): New function.
6463 (objfile_getset): Add "username".
6465 2015-01-24 Mark Wielaard <mjw@redhat.com>
6467 * stack.c (return_command): Markup warning message with _.
6469 2015-01-24 Doug Evans <xdje42@gmail.com>
6471 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
6473 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
6475 Fix 100x slowdown regression on DWZ files.
6476 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
6477 (struct line_header): Add offset and offset_in_dwz.
6478 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
6479 (free_line_header_voidp): New declaration.
6480 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
6482 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
6483 (handle_DW_AT_stmt_list): Use line_header_hash.
6484 (free_line_header_voidp): New function.
6485 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
6486 (dwarf_decode_lines): New parameter decode_mapping, use it.
6487 (dwarf2_free_objfile): Free line_header_hash.
6489 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
6492 * valops.c (value_rtti_indirect_type): Catch exception thrown by
6495 2015-01-15 Mark Wielaard <mjw@redhat.com>
6497 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
6499 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
6500 calling_convention an 8 bit bit field.
6501 (TYPE_NO_RETURN): New macro.
6502 * infcmd.c (finish_command): Query if function does not return
6504 * stack.c (return_command): Likewise.
6506 2015-01-23 Pedro Alves <palves@redhat.com>
6508 * linux-nat.c (linux_is_async_p): New macro.
6509 (linux_nat_is_async_p):
6510 (linux_nat_terminal_inferior): Check whether the target can async
6511 instead of whether it is already async.
6512 (linux_nat_terminal_ours): Don't check whether the target is
6514 (linux_async_pipe): Use linux_is_async_p.
6516 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6518 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
6520 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
6521 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
6522 Sort tp_array using tp_array_compar.
6523 (_initialize_thread): Extend thread_apply_all_command help.
6525 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6527 * corelow.c (core_open): Call also thread_command.
6528 * gdbthread.h (thread_command): New prototype moved from ...
6529 * thread.c (thread_command): ... here.
6530 (thread_command): Make it global.
6532 2015-01-22 Pedro Alves <palves@redhat.com>
6534 * configure.ac [*mingw32*]: Check $curses_found instead of
6536 * configure: Regenerate.
6537 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
6538 HAVE_NCURSES_NCURSES_H checks.
6540 2015-01-22 Eli Zaretskii <eliz@gnu.org>
6542 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
6543 fails with the 1st arg NULL, try again with "unknown". Don't test
6544 the "cup" capability: it isn't supported by the Windows port of
6545 ncurses, but the Windows console driver is still capable of
6548 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6550 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
6552 2015-01-22 Eli Zaretskii <eliz@gnu.org>
6554 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
6555 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
6556 reason that "make TAGS" is broken.
6558 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
6560 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
6561 and check additional store instructions.
6563 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
6565 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
6567 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
6569 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
6570 ppc_canonicalize_syscall, ppc_linux_syscall_record,
6571 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
6572 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
6573 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
6574 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
6575 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
6576 ppc_process_record_op19, ppc_process_record_op31,
6577 ppc_process_record_op59, ppc_process_record_op60,
6578 ppc_process_record_op63): Likewise.
6580 2015-01-20 Joel Brobecker <brobecker@adacore.com>
6582 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
6583 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
6586 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
6588 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
6589 ppc_process_record_op31, ppc_process_record_op59,
6590 ppc_process_record_op60, ppc_process_record_op63,
6591 ppc_process_record): Fix -Wformat warning.
6592 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
6593 Remove unused variables.
6595 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
6597 * MAINTAINERS (Write After Approval): Add "Chen Gang".
6599 2015-01-19 Eli Zaretskii <eliz@gnu.org>
6601 * configure.ac [*mingw32*]: Only add windows-termcap.o to
6602 CONFIG_OBS if not building with a curses library.
6603 * configure: Regenerate.
6605 * windows-termcap.c: Include defs.h. Make the whole body empty if
6606 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
6607 HAVE_NCURSES_NCURSES_H is defined.
6609 2015-01-19 Joel Brobecker <brobecker@adacore.com>
6611 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
6612 from end of line to start of next line.
6614 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6616 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
6617 Scan PLT stub backward for reverse debugging.
6618 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
6620 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6621 Ulrich Weigand <uweigand@de.ibm.com>
6623 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
6625 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
6627 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
6628 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
6629 (ppc_linux_init_abi): Set process_record, process_record_signal.
6630 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
6631 ppc_linux_record_tdep to gdbarch_tdep.
6632 (ppc_process_record): New declaration.
6633 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
6634 ppc_process_record_op19, ppc_process_record_op31,
6635 ppc_process_record_op59, ppc_process_record_op60,
6636 ppc_process_record_op63, ppc_process_record): New functions.
6638 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6640 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
6641 rs6000_in_function_epilogue_frame_p and add an argument
6643 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
6644 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
6646 (rs6000_epilogue_frame_unwind): New.
6647 (rs6000_gdbarch_init): Append epilogue unwinder.
6649 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
6651 * nat/linux-personality.c: Replace "#ifndef
6652 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
6653 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
6656 2015-01-16 Eli Zaretskii <eliz@gnu.org>
6658 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
6660 (_initialize_tui_win) <border-kind, border-mode>:
6661 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
6662 (tui_set_tab_width_command): Fix the commentary.
6664 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
6666 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
6668 (tui_set_tab_width_command): Delete and recreate the source and
6669 the disassembly windows, to show the effect of the changed tab
6672 * tui/tui-data.h (LINE_PREFIX): Make shorter
6673 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
6674 "Thread NNNNN.XXXX" thread ID notation on Windows.
6676 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
6678 Fix gcc-5 compilation.
6679 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
6681 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
6683 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
6684 (linux-personality.o): New rule.
6685 * common/common-defs.h: Include <stdint.h>.
6686 * config/aarch64/linux.mh (NATDEPFILES): Include
6687 linux-personality.o.
6688 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
6689 * config/arm/linux.mh (NATDEPFILES): Likewise.
6690 * config/i386/linux64.mh (NATDEPFILES): Likewise.
6691 * config/i386/linux.mh (NATDEPFILES): Likewise.
6692 * config/ia64/linux.mh (NATDEPFILES): Likewise.
6693 * config/m32r/linux.mh (NATDEPFILES): Likewise.
6694 * config/m68k/linux.mh (NATDEPFILES): Likewise.
6695 * config/mips/linux.mh (NATDEPFILES): Likewise.
6696 * config/pa/linux.mh (NATDEPFILES): Likewise.
6697 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
6698 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
6699 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
6700 * config/s390/linux.mh (NATDEPFILES): Likewise.
6701 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
6702 * config/sparc/linux.mh (NATDEPFILES): Likewise.
6703 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
6704 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
6705 * defs.h: Remove #include <stdint.h> (moved to
6706 common/common-defs.h).
6707 * linux-nat.c: Include nat/linux-personality.h. Remove #include
6708 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
6709 nat/linux-personality.c).
6710 (linux_nat_create_inferior): Remove code to disable address space
6711 randomization (moved to nat/linux-personality.c). Create cleanup
6712 to disable address space randomization.
6713 * nat/linux-personality.c: New file.
6714 * nat/linux-personality.h: Likewise.
6716 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
6718 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
6719 common/posix-strerror.c.
6720 (posix-strerror.o): New rule.
6721 (mingw-strerror.o): Likewise.
6722 * common/common-utils.h (safe_strerror): Move prototype to here,
6724 * common/common.host: New file.
6725 * common/mingw-strerror.c: Likewise.
6726 * common/posix-strerror.c: Likewise.
6727 * configure: Regenerated.
6728 * configure.ac: Source common/common.host. Add variable
6729 common_host_obs to gdb_host_obs.
6730 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
6731 gdb/common/posix-strerror.c when warning about the use of
6733 * mingw-hdep.c (safe_strerror): Remove definition; move it to
6734 common/mingw-strerror.c.
6735 * posix-hdep.c (safe_strerror): Remove definition; move it to
6736 common/posix-hdep.c.
6737 * utils.h (safe_strerror): Remove prototype; move to
6738 common/common-utils.h.
6740 2015-01-15 Joel Brobecker <brobecker@adacore.com>
6744 2015-01-15 Joel Brobecker <brobecker@adacore.com>
6746 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
6747 ___XA type if the array has already been fixed.
6749 2015-01-14 Yao Qi <yao@codesourcery.com>
6751 * Makefile.in (ppc-linux.o): New rule.
6752 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
6753 * configure.ac: AC_CHECK_FUNCS(getauxval).
6754 * config.in: Re-generated.
6755 * configure: Re-generated.
6756 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
6758 * nat/ppc-linux.c: New file.
6759 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
6760 Call ppc64_64bit_inferior_p.
6762 2015-01-14 Yao Qi <yao@codesourcery.com>
6764 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
6766 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
6767 (PPC_FEATURE_HAS_DFP): Likewise.
6768 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
6769 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
6770 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
6771 Include "nat/ppc-linux.h".
6772 * nat/ppc-linux.h: New file.
6773 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
6775 2015-01-14 Pedro Alves <palves@redhat.com>
6778 * breakpoint.c: Include "interps.h".
6779 (bpstat_do_actions_1): Also check whether the interpreter is
6782 2015-01-14 Pedro Alves <palves@redhat.com>
6785 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
6786 reinstall if the interpreter is sync.
6788 2015-01-13 Doug Evans <dje@google.com>
6790 * objfiles.c (objfile_filename): New function.
6791 * objfiles.h (objfile_filename): Declare it.
6792 (objfile_name): Add function comment.
6793 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
6794 bfd file name (which may be realpath'd), and the original name.
6796 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6798 * NEWS: Create a new section for the next release branch.
6799 Rename the section of the current branch, now that it has
6802 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6804 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
6805 * version.in: Bump version to 7.9.50.DATE-cvs.
6807 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6809 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
6810 Remove trailing new-line in argument of call to warning.
6812 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6814 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
6815 new-line in argument of call to "warning".
6817 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6819 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
6820 in static block, then try searching for primitive types.
6822 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
6824 * top.h (gdb_add_history): Declare.
6825 * top.c (command_count): New variable.
6826 (gdb_add_history): New function.
6827 (gdb_safe_append_history): New static function.
6828 (quit_force): Call it.
6829 (command_line_input): Use gdb_add_history instead of
6831 * event-top.c (command_line_handler): Likewise.
6833 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
6836 * darwin-nat.c: Replace <machine/setjmp.h> #include by
6837 <setjmp.h> #include.
6839 2015-01-11 Doug Evans <xdje42@gmail.com>
6841 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
6843 2015-01-11 Doug Evans <xdje42@gmail.com>
6846 * NEWS: The "maint demangle" command is renamed as "demangle".
6847 * demangle.c: #include cli/cli-utils.h, language.h.
6848 (demangle_command): New function.
6849 (_initialize_demangle): Add new command "demangle".
6850 * maint.c (maintenance_demangle): Stub out.
6851 (_initialize_maint_cmds): Update help text for "maint demangle",
6852 and mark as deprecated.
6854 2015-01-11 Mark Kettenis <kettenis@gnu.org>
6856 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
6857 inferior_thread is a function.
6859 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
6861 * Makefile.in (.y.c): Don't munge yacc's #line
6864 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
6866 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
6867 to prompt for input.
6868 * tui/tui-hooks.c (tui_query_hook): Remove.
6869 (tui_install_hooks): Don't set deprecated_query_hook.
6870 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
6871 height calculation. Always update the command window's cur_line.
6873 2015-01-09 Pedro Alves <palves@redhat.com>
6875 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
6877 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
6879 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
6880 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
6882 (check_stopped_by_watchpoint): New function.
6883 (save_sigtrap): Reimplement.
6884 (linux_nat_stopped_by_watchpoint): Adjust.
6885 (linux_nat_lp_status_is_event): Delete.
6886 (stop_wait_callback): Only call save_sigtrap after storing the
6888 (status_callback): If the thread had been stopped for a breakpoint
6889 that has since been removed, discard the event and resume the LWP.
6890 (count_events_callback, select_event_lwp_callback): Use
6891 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
6892 (cancel_breakpoint): Rename to ...
6893 (check_stopped_by_breakpoint): ... this. Record whether the LWP
6894 stopped for a software breakpoint or hardware breakpoint.
6895 (select_event_lwp): Only give preference to the stepping LWP in
6896 all-stop mode. Adjust comments.
6897 (stop_and_resume_callback): Remove references to new_pending_p.
6898 (linux_nat_filter_event): Likewise. Leave exit events of the
6899 leader thread pending here. Handle signal short circuiting here.
6900 Only call save_sigtrap after storing the pending waitstatus.
6901 (linux_nat_wait_1): Remove 'retry' label. Remove references to
6902 new_pending. Don't handle leaving events the caller is not
6903 interested in pending here, nor handle signal short-circuiting
6904 here. Also give equal priority to all LWPs that have had events
6905 in non-stop mode. If reporting a software breakpoint event,
6906 unadjust the LWP's PC.
6907 * linux-nat.h (enum lwp_stop_reason): New.
6908 (struct lwp_info) <stop_pc>: New field.
6909 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
6910 (struct lwp_info) <stop_reason>: New field.
6911 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
6913 2015-01-09 Pedro Alves <palves@redhat.com>
6915 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
6916 Set the LWP's 'resumed' flag.
6918 2015-01-09 Pedro Alves <palves@redhat.com>
6920 * linux-nat.c (linux_resume_one_lwp): New function.
6921 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
6922 (linux_nat_resume): Use lwp_status_pending_p and
6923 linux_resume_one_lwp.
6924 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
6925 (linux_handle_extended_wait): Use linux_resume_one_lwp.
6926 (status_callback, running_callback): Use lwp_status_pending_p.
6927 (lwp_status_pending_p): New function.
6928 (stop_and_resume_callback): Use lwp_status_pending_p.
6929 (linux_nat_filter_event): Use linux_resume_one_lwp.
6930 (linux_nat_wait_1): Always use status_callback to look for an LWP
6931 with a pending status. Use linux_resume_one_lwp.
6932 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
6933 linux_resume_one_lwp.
6935 2015-01-09 Pedro Alves <palves@redhat.com>
6937 * breakpoint.c (bp_location_inserted_here_p): New function,
6938 factored out from ...
6939 (breakpoint_inserted_here_p): ... here. Use
6940 ALL_BP_LOCATIONS_AT_ADDR.
6941 (software_breakpoint_inserted_here_p): Use
6942 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
6944 2014-01-09 Pedro Alves <palves@redhat.com>
6946 Skip enabling event reporting if the kernel supports
6948 * linux-thread-db.c: Include "nat/linux-ptrace.h".
6949 (thread_db_use_events): New function.
6950 (try_thread_db_load_1): Check thread_db_use_events before enabling
6952 (update_thread_state): New function.
6953 (attach_thread): Use it. Check thread_db_use_events before
6954 enabling event reporting.
6955 (thread_db_detach): Check thread_db_use_events before disabling
6957 (find_new_threads_callback): Check thread_db_use_events before
6958 enabling event reporting. Update the thread's state if not using
6959 libthread_db events.
6961 2015-01-09 Pedro Alves <palves@redhat.com>
6963 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
6964 about to wait for is > 0.
6965 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
6966 the kernel thread ID is -1.
6968 2015-01-09 Pedro Alves <palves@redhat.com>
6970 * linux-nat.c (attach_proc_task_lwp_callback): New function.
6971 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
6972 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
6973 ptrace option flags.
6974 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
6976 * nat/linux-procfs.c: Include <dirent.h>.
6977 (linux_proc_get_int): New parameter "warn". Handle it.
6978 (linux_proc_get_tgid): Adjust.
6979 (linux_proc_get_tracerpid): Rename to ...
6980 (linux_proc_get_tracerpid_nowarn): ... this.
6981 (linux_proc_pid_get_state): New function, factored out from
6982 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
6984 (linux_proc_pid_is_gone): New function.
6985 (linux_proc_pid_is_stopped): Adjust.
6986 (linux_proc_pid_is_zombie_maybe_warn)
6987 (linux_proc_pid_is_zombie_nowarn): New functions.
6988 (linux_proc_pid_is_zombie): Use
6989 linux_proc_pid_is_zombie_maybe_warn.
6990 (linux_proc_attach_tgid_threads): New function.
6991 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
6992 (linux_proc_get_tracerpid): Rename to ...
6993 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
6994 (linux_proc_pid_is_gone): New declaration.
6995 (linux_proc_pid_is_zombie): Update comment.
6996 (linux_proc_pid_is_zombie_nowarn): New declaration.
6997 (linux_proc_attach_lwp_func): New typedef.
6998 (linux_proc_attach_tgid_threads): New declaration.
6999 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
7000 use nowarn functions.
7001 (linux_ptrace_attach_fail_reason_string): Move here from
7002 gdbserver/linux-low.c and rename.
7003 (ptrace_supports_feature): If the current ptrace options are not
7004 known yet, check them now, instead of asserting.
7005 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
7008 2015-01-09 Pedro Alves <palves@redhat.com>
7010 * linux-thread-db.c (thread_db_find_new_threads_silently)
7011 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
7012 (find_new_threads_once): Print debug output on gdb_stdlog.
7014 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
7015 Pedro Alves <palves@redhat.com>
7017 * compile/compile.c: Include "gdb_wait.h".
7018 (do_rmdir): Check return value, and free 'zap'.
7020 2015-01-08 Pedro Alves <palves@redhat.com>
7021 Yao Qi <yao@codesourcery.com>
7023 * dwarf2loc.c (indirect_pieced_value): Don't call
7024 gdb_sign_extend. Call extract_signed_integer instead.
7025 * utils.c (gdb_sign_extend): Remove.
7026 * utils.h (gdb_sign_extend): Remove declaration.
7028 2015-01-07 Pierre Muller <muller@sourceware.org>
7031 * stabsread.c (define_symbol): Set language for C++ special symbols.
7033 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
7035 * inflow.c (initial_gdb_ttystate): Tweak comment.
7037 2015-01-07 Joel Brobecker <brobecker@adacore.com>
7039 * inflow.c (set_initial_gdb_ttystate): Add empty line after
7040 comment documenting function.
7042 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
7044 * terminal.h (set_initial_gdb_ttystate): Declare.
7045 * inflow.c (initial_gdb_ttystate): New static variable.
7046 (set_initial_gdb_ttystate): New setter.
7047 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
7048 instead of our current terminal state.
7049 * top.c (gdb_init): Call set_initial_gdb_ttystate.
7051 2015-01-07 Joel Brobecker <brobecker@adacore.com>
7053 * guile/scm-type.c (tyscm_array_1): Add comment.
7054 * python/py-type.c (typy_array_1): Add comment.
7056 2015-01-06 Joel Brobecker <brobecker@adacore.com>
7058 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
7059 error if N2 is equal to N1 - 1.
7061 2015-01-06 Joel Brobecker <brobecker@adacore.com>
7063 * python/py-type.c (typy_array_1): Do not raise negative-length
7064 exception if N2 is equal to N1 - 1.
7066 2015-01-03 Doug Evans <xdje42@gmail.com>
7068 * c-exp.y: Whitespace cleanup.
7069 (classify_inner_name): Remove extra ;.
7071 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
7073 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
7076 2015-01-02 Doug Evans <dje@google.com>
7078 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
7080 2015-01-02 Doug Evans <dje@google.com>
7082 * symtab.h (struct symbol): Fix typo in comment.
7084 2015-01-01 Joel Brobecker <brobecker@adacore.com>
7086 Update year range in copyright notice of all files.
7088 2015-01-01 Joel Brobecker <brobecker@adacore.com>
7090 * top.c (print_gdb_version): Update copyright year to 2015.
7092 2015-01-01 Joel Brobecker <brobecker@adacore.com>
7094 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
7096 For older changes see ChangeLog-2014.
7102 version-control: never