1 2013-03-26 Pedro Alves <palves@redhat.com>
3 * ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
4 (net_open): Make 'polls' local unsigned.
6 2013-03-26 Pedro Alves <palves@redhat.com>
8 * remote.c (_initialize_remote): Make "set remoteaddresssize"
9 a zuinteger command instead of uinteger.
11 2013-03-26 Pedro Alves <palves@redhat.com>
13 * record-full.c (record_full_insn_num): Make it unsigned.
14 (record_full_check_insn_num, record_full_message)
15 (record_full_registers_change, record_full_xfer_partial): Remove
16 record_full_insn_max_num check (it's always != 0).
17 (record_full_info, record_full_restore): Use %u as format string.
18 (): Use %u as format string.
19 (set_record_full_insn_max_num): Remove record_full_insn_max_num
20 check (it's always != 0).
22 2013-03-26 Pedro Alves <palves@redhat.com>
24 * dcache.c (_initialize_dcache): Make the "set dcache line-size"
25 and "set dcache size" commands zuinteger instead of uinteger.
27 2013-03-26 Pedro Alves <palves@redhat.com>
29 * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
30 command zuinteger instead of uinteger.
32 2013-03-26 Pedro Alves <palves@redhat.com>
34 * coff-pe-read.c (_initialize_coff_pe_read): Make the command
35 zuinteger instead of uinteger.
37 2013-03-26 Pedro Alves <palves@redhat.com>
39 * record.c (record_insn_history_size_setshow_var)
40 (record_call_history_size_setshow_var): New globals.
41 (command_size_to_target_size): New function.
42 (cmd_record_insn_history, cmd_record_call_history): Use
43 command_size_to_target_size instead of cast.
44 (validate_history_size, set_record_insn_history_size)
45 (set_record_call_history_size): New functions.
46 (_initialize_record): Install set_record_insn_history_size and
47 set_record_call_history_size as "set" hooks of "set record
48 instruction-history-size" and "set record
49 function-call-history-size".
51 2013-03-26 Pedro Alves <palves@redhat.com>
53 * top.c (gdb_rl_operate_and_get_next): Replace max_input_history
54 use with history_max_entries use. Remove FIXME note.
56 2013-03-26 Markus Metzger <markus.t.metzger@intel.com>
58 * record-btrace.c (record_btrace_close): Call
59 record_btrace_auto_disable.
61 2013-03-25 Joel Brobecker <brobecker@adacore.com>
63 * rs6000-nat.c (fixup_breakpoints): Delete declaration.
65 2013-03-25 Doug Evans <dje@google.com>
67 * contrib/cc-with-tweaks.sh: Check exit code of dwp.
69 2013-03-25 Tom Tromey <tromey@redhat.com>
72 * c-exp.y (exp): Add new productions for destructors after '.' and
74 (write_destructor_name): New function.
76 2013-03-25 Tom Tromey <tromey@redhat.com>
79 * opencl-lang.c (evaluate_subexp_opencl) <STRUCTOP_STRUCT>: Use
80 value_struct_elt, not lookup_struct_elt_type.
81 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
82 STRUCTOP_PTR>: Use value_struct_elt, not lookup_struct_elt_type.
83 * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment.
85 2013-03-25 Yao Qi <yao@codesourcery.com>
87 * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir'
90 2013-03-23 Eli Zaretskii <eliz@gnu.org>
92 * windows-nat.c (windows_get_absolute_argv0): New function.
93 * windows-nat.h: Add its prototype.
95 * main.c (get_init_files): Use filename_ncmp instead of strncmp.
96 Use IS_DIR_SEPARATOR instead of looking for a character inside
97 SLASH_STRING. Include filenames.h.
98 (captured_main) [__MINGW32__]: Make argv[0] absolute, so that
99 relocate_gdb_directory works when passed gdb_program_name.
100 Include windows-nat.h.
102 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
104 * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
105 * remote.c (trace_error): Remove the special handling of '2'.
106 (readchar) <SERIAL_EOF>
107 (readchar) <SERIAL_ERROR>
108 (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
109 (remote_get_trace_status): Call throw_exception if EX is
111 * utils.c (perror_with_name): Rename to ...
112 (throw_perror_with_name): ... here. New parameter errcode, describe it
113 in the function comment.
114 (perror_with_name): New function wrapper.
115 * utils.h (enum errors): New stub declaration.
116 (throw_perror_with_name): New declaration.
118 2013-03-22 Pedro Alves <palves@redhat.com>
119 Yao Qi <yao@codesourcery.com>
120 Mark Kettenis <kettenis@gnu.org>
122 * cli/cli-setshow.c (do_set_command) <var_uinteger>:
123 Don't let the user set the value to UINT_MAX directly.
124 <var_integer>: Don't let the user set the value to INT_MAX
127 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
129 * remote.c (remote_unpush_target): New function.
130 (remote_open_1): Remove two pop_target calls, update one comment, add
131 comment to target_preopen call. Replace pop_target call by
132 remote_unpush_target call.
133 (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
134 pop_target calls by remote_unpush_target calls.
136 2013-03-22 Pedro Alves <palves@redhat.com>
138 * linux-nat.c (linux_child_follow_fork): Don't call
139 linux_enable_event_reporting.
140 (linux_handle_extended_wait): Don't call
141 linux_enable_event_reporting.
143 2013-03-22 Pedro Alves <palves@redhat.com>
145 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
146 use it to rewrite the trampoline buffers with type gdb_byte[], and
147 undefine the macro. Remove char* cast.
149 2013-03-21 Doug Evans <dje@google.com>
151 New commands "mt set per-command {space,time,symtab} {on,off}".
153 * event-top.c: #include "maint.h".
154 * main.c: #include "maint.h".
155 * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
156 timeval-utils.h, maint.h, cli/cli-setshow.h.
157 (per_command_time, per_command_space): New static globals.
158 (per_command_symtab): New static global.
159 (per_command_setlist, per_command_showlist): New static globals.
160 (struct cmd_stats): Move here from utils.c.
161 (set_per_command_time): Renamed from set_display_time in utils.c
162 and moved here. All callers updated.
163 (set_per_command_space): Renamed from set_display_space in utils.c
164 and moved here. All callers updated.
165 (count_symtabs_and_blocks): New function.
166 (report_command_stats): Moved here from utils.c. Add support for
167 printing symtab stats. Only print data if enabled before command
169 (make_command_stats_cleanup): Ditto.
170 (sert_per_command_cmd, show_per_command_cmd): New functions.
171 (_initialize_maint_cmds): Add new commands
172 mt set per-command {space,time,symtab} {on,off}.
174 * top.c: #include "maint.h".
175 * utils.c (reset_prompt_for_continue_wait_time): New function.
176 (get_prompt_for_continue_wait_time): New function.
177 * utils.h (reset_prompt_for_continue_wait_time): Declare
178 (get_prompt_for_continue_wait_time): Declare.
179 (make_command_stats_cleanup): Moved to maint.h.
180 (set_display_time, set_display_space): Moved to maint.h and renamed
181 to set_per_command_time, set_per_command_space.
182 * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
183 parse_binary_operation and made non-static. Don't call error,
184 just return an error marker. All callers updated.
185 * cli/cli-setshow.h (parse_cli_boolean_value): Declare.
187 2013-03-21 Tom Tromey <tromey@redhat.com>
189 * symfile.c (alloc_section_addr_info): Update header. Don't set
190 'num_sections' field.
191 (build_section_addr_info_from_section_table): Set 'num_sections'.
192 (build_section_addr_info_from_bfd): Likewise.
193 (build_section_addr_info_from_objfile): Remove dead loop
195 (free_section_addr_info): Unconditionally call xfree.
196 (relative_addr_info_to_section_offsets, addrs_section_sort)
197 (addr_info_make_relative, syms_from_objfile_1): Remove dead loop
199 (syms_from_objfile_1): Remove dead 'if' condition. Check
201 (add_symbol_file_command): Set 'num_sections'.
202 * symfile-mem.c (symbol_file_add_from_memory): Set
204 * somread.c (som_symfile_offsets): Remove dead loop condition.
205 * machoread.c (macho_symfile_offsets): Remove dead 'if'.
206 * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'.
208 2013-03-21 Tom Tromey <tromey@redhat.com>
210 * tracepoint.h (decode_agent_options): Add 'trace_string'
212 * tracepoint.c (decode_agent_options): Add 'trace_string'
214 (validate_actionline): Update.
215 (collect_symbol): Add 'trace_string' argument.
216 (struct add_local_symbols_data) <trace_string>: New field.
217 (do_collect_symbol): Update.
218 (add_local_symbols): Add 'trace_string' argument.
219 (encode_actions_1): Update.
220 (trace_dump_actions): Update.
221 * dwarf2loc.c (access_memory): Update.
222 * ax.h (struct agent_expr) <tracing, trace_string>: New fields.
223 * ax-general.c (new_agent_expr): Update.
224 * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
225 (gen_trace_for_return_address): Add argument.
226 (trace_kludge, trace_string_kludge): Remove.
227 * ax-gdb.c (trace_kludge, trace_string_kludge): Remove.
228 (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update.
229 (gen_trace_for_var): Add 'trace_string' argument.
230 (gen_trace_for_expr, gen_trace_for_return_address): Likewise.
231 (gen_printf, agent_eval_command_one): Update.
233 2013-03-21 Tom Tromey <tromey@redhat.com>
236 * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
237 Handle FILENAME token.
239 2013-03-21 Tom Tromey <tromey@redhat.com>
241 * c-exp.y (YYPRINT): Define.
242 (c_print_token): New function.
244 2013-03-21 Tom Tromey <tromey@redhat.com>
246 * c-exp.y (%union) <sym, ivar, ivec>: Remove.
248 2013-03-21 Yao Qi <yao@codesourcery.com>
250 * ctf.c: Include "gdb_stat.h".
251 [USE_WIN32API]: New macro 'mkdir'.
252 (ctf_start): Use permission bits macros if they are defined.
254 2013-03-20 Keith Seitz <keiths@redhat.com>
256 * breakpoint.h (struct breakpoint): Add comment to
257 extra_string indicating that this member is mallod'd.
258 * breakpoint.c (base_breakpoint_dtor): Free extra_string.
260 2013-03-20 Pedro Alves <palves@redhat.com>
264 * cli/cli-setshow.c (do_set_command)
265 <var_uinteger, var_zuinteger>: Use LONGEST for variable holding
266 the result of parsing the command argument. Throw error if the
267 value is greater than UINT_MAX. Print the invalid value with
269 <var_integer, var_zinteger>: Use LONGEST for variable holding the
270 result of parsing the command argument. Throw error if the value
271 is greater than INT_MAX, not greater or equal. Also throw error
272 if the value is less than INT_MIN. Print the invalid value with
274 <var_zuinteger_unlimited>: Throw error if the value is greater
275 than INT_MAX, not greater or equal.
276 (do_show_command) <var_integer, var_zinteger,
277 var_zuinteger_unlimited>: Use %d for printing int, not %u.
279 2013-03-20 Tom Tromey <tromey@redhat.com>
281 * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops,
283 * dwarf2read.c (read_func_scope): Remove old FIXME.
284 * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
286 * findvar.c (symbol_read_needs_frame, default_read_var_value):
287 Unconditionally call via computed ops, if possible.
288 * printcmd.c (address_info): Unconditionally call via computed ops,
290 * stack.c (read_frame_arg): Unconditionally call via computed ops,
292 * symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
293 * tracepoint.c (scope_info): Unconditionally call via computed ops,
296 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
297 Tom Tromey <tromey@redhat.com>
300 * coffread.c (coff_register_index): New global.
301 (process_coff_symbol, coff_read_enum_type): Set
303 (_initialize_coffread): Initialize new global.
304 * dwarf2loc.c (locexpr_find_frame_base_location)
305 (dwarf2_block_frame_base_locexpr_funcs)
306 (loclist_find_frame_base_location)
307 (dwarf2_block_frame_base_loclist_funcs): New.
308 (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error.
309 (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist.
310 * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs)
311 (dwarf2_block_frame_base_loclist_funcs): New.
312 * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index)
313 (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New
315 (read_func_scope): Update.
316 (fixup_go_packaging, mark_common_block_symbol_computed)
317 (var_decode_location, new_symbol_full, dwarf2_const_value):
318 Set SYMBOL_ACLASS_INDEX.
319 (dwarf2_symbol_mark_computed): Likewise. Add 'is_block' argument.
320 (_initialize_dwarf2_read): Initialize new globals.
321 * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX.
322 * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX.
323 * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New
325 (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX.
326 (_initialize_mdebugread): Initialize new globals.
327 * psympriv.h (struct partial_symbol) <aclass>: Update comment.
328 * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX.
329 (stab_register_index, stab_regparm_index): New globals.
330 (define_symbol, read_enum_type, common_block_end): Set
332 (_initialize_stabsread): Initialize new globals.
333 * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New
335 (MAX_SYMBOL_IMPLS): New define.
336 (register_symbol_computed_impl, register_symbol_block_impl)
337 (register_symbol_register_impl)
338 (initialize_ordinary_address_classes): New functions.
339 (_initialize_symtab): Call initialize_ordinary_address_classes.
340 * symtab.h (enum address_class) <LOC_FINAL_VALUE>: New constant.
341 (struct symbol_impl): New.
342 (SYMBOL_ACLASS_BITS): New define.
343 (struct symbol) <aclass, ops>: Remove fields.
344 <aclass_index>: New field.
345 (symbol_impls): Declare.
346 (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine.
347 (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines.
348 (register_symbol_computed_impl, register_symbol_block_impl)
349 (register_symbol_register_impl): Declare.
350 (struct symbol_computed_ops): Add location_has_loclist.
351 (struct symbol_block_ops): New.
352 (SYMBOL_BLOCK_OPS): New.
353 * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX.
355 2013-03-20 Tom Tromey <tromey@redhat.com>
357 * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
358 (print_partial_symbols, recursively_search_psymtabs): Use
361 2013-03-20 Pierre Muller <muller@sourceware.org>
363 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
364 addtion, subtraction, multiplication and division binary operator.
366 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
369 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
370 * bsd-kvm.c (bsd_kvm_close): Likewise.
371 * bsd-uthread.c (bsd_uthread_close): Likewise.
372 * corelow.c (core_close): Likewise.
373 (core_close_cleanup): Remove parameter quitting from a caller.
374 * event-top.c (async_disconnect): Likewise.
375 * exec.c (exec_close_1): Remove parameter quitting.
376 * go32-nat.c (go32_close): Likewise.
377 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
378 parameter quitting from a caller.
379 * mips-linux-nat.c (super_close): Remove parameter quitting from the
381 (mips_linux_close): Remove parameter quitting. Remove parameter
382 quitting from a caller.
383 * monitor.c (monitor_close): Remove parameter quitting.
384 * monitor.h (monitor_close): Likewise.
385 * record-btrace.c (record_btrace_close): Likewise.
386 * record-full.c (record_full_close): Likewise.
387 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
388 it also from fprintf_unfiltered.
389 * remote-mips.c (mips_close): Remove parameter quitting.
390 (mips_detach): Remove parameter quitting from a caller.
391 * remote-sim.c (gdbsim_close): Remove parameter quitting.
392 (gdbsim_close): Remove duplicate function comment. Remove parameter
393 quitting and remove it also from printf_filtered.
394 * remote.c (remote_close): Remove parameter quitting.
395 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
396 * target.c (update_current_target): Remove parameter int from to_close
398 (push_target, unpush_target, pop_target): Remove parameter quitting from
400 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
401 Remove parameter quitting from a caller.
402 (target_preopen): Remove parameter quitting from a caller.
403 (target_close): Remove parameter quitting. Remove parameter quitting
404 from a caller two times. Remove parameter quitting also from
406 * target.h (struct target_ops): Remove parameter quitting and as int
407 from fields to_xclose and to_close.
408 (extern struct target_ops current_target):
409 (target_close, pop_all_targets): Remove parameter quitting. Update the
411 (pop_all_targets_above): Remove parameter quitting.
412 * top.c (quit_target): Remove parameter quitting from a caller.
413 * tracepoint.c (tfile_close): Remove parameter quitting.
414 * windows-nat.c (windows_close): Remove parameter quitting.
416 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
418 * windows-nat.c (handle_output_debug_string): Replace call
419 to string_to_core_addr with call to strtoull.
421 2013-03-20 Yao Qi <yao@codesourcery.com>
423 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
424 and write it to CTF metadata.
426 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
428 * windows-nat.c (handle_output_debug_string): Change type of n to
429 SIZE_T to avoid crash on 64 bit systems.
431 2013-03-17 Eli Zaretskii <eliz@gnu.org>
433 * python/python-internal.h (HAVE_SNPRINTF)
434 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
435 about redefinition of snprintf by pyerrors.h.
437 2013-03-15 Steve Ellcey <sellcey@mips.com>
439 * remote-sim.c (sim_command_completer): Make char arguments const.
441 2013-03-15 Tom Tromey <tromey@redhat.com>
444 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
446 2013-03-14 Tom Tromey <tromey@redhat.com>
448 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
450 (get_file_crc): Move from symfile.c.
451 (gdb_bfd_crc): New function.
452 * gdb_bfd.h (gdb_bfd_crc): Declare.
453 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
454 * symfile.c (get_file_crc): Move to gdb_bfd.c.
455 (separate_debug_file_exists): Use gdb_bfd_crc.
457 2013-03-14 Tom Tromey <tromey@redhat.com>
459 * symfile.c (get_debug_link_info): Remove.
460 (find_separate_debug_file_by_debuglink): Use
461 bfd_get_debug_link_info.
463 2013-03-14 Tom Tromey <tromey@redhat.com>
465 * symtab.c (error_in_psymtab_expansion): New function.
466 (lookup_symbol_aux_quick)
467 (basic_lookup_transparent_type_quick): Remove "last resort"
468 code. Use error_in_psymtab_expansion.
470 2013-03-14 Doug Evans <dje@google.com>
471 Jan Kratochvil <jan.kratochvil@redhat.com>
473 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
474 any successful compare_filenames_for_search or FILENAME_CMP.
475 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
476 * symtab.c (iterate_over_some_symtabs): Likewise.
478 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
480 * source.c (print_source_lines_base): Make a local copy of
483 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
484 Jan Kratochvil <jan.kratochvil@redhat.com>
486 * source.c (print_source_lines_base): Suppress "file" for TUI.
488 2013-03-14 Keith Seitz <keiths@redhat.com>
489 Alan Matsuoka <alanm@redhat.com>
493 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
495 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
498 2013-03-14 Yao Qi <yao@codesourcery.com>
500 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
501 status to tfile if trace is stopped by command 'tstop'.
503 2013-03-14 Yao Qi <yao@codesourcery.com>
505 * tracepoint.c (tfile_write_status): Write trace notes and user
506 name into tfile if they are not NULL.
508 2013-03-14 Hui Zhu <hui@codesourcery.com>
509 Yao Qi <yao@codesourcery.com>
511 * Makefile.in (REMOTE_OBS): Add ctf.o.
513 (HFILES_NO_SRCDIR): Add ctf.h.
514 * ctf.c, ctf.h: New files.
515 * tracepoint.c: Include 'ctf.h'.
516 (collect_pseudocommand): Remove static.
517 (trace_save_command): Parse option "-ctf".
518 Produce different trace file writers per option.
519 Adjust output message.
520 (trace_save_tfile, trace_save_ctf): New.
521 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
522 * mi/mi-main.c: Include 'ctf.h'.
523 (mi_cmd_trace_save): Handle option '-ctf'. Call either
524 trace_save_tfile or trace_save_ctf.
525 * NEWS: Mention these changes.
527 2013-03-14 Yao Qi <yao@codesourcery.com>
529 * tracepoint.c (trace_file_writer_xfree): New.
530 (struct tfile_writer_data): New.
531 (tfile_dtor, tfile_can_target_save, tfile_start): New.
532 (tfile_write_header, tfile_write_regblock_type): New.
533 (tfile_write_status, tfile_write_uploaded_tsv): New.
534 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
535 (tfile_write_raw_data, (tfile_end): New.
536 (tfile_write_ops): New global variable.
537 (TRACE_WRITE_R_BLOCK): New macro.
538 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
539 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
540 (TRACE_WRITE_V_BLOCK): New macro.
541 (trace_save): Add extra one parameter WRITER. Make it static.
542 Use WRITER to writer trace.
543 (tfile_trace_file_writer_new): New.
544 (trace_save_command): Caller update.
545 (trace_save_tfile): Write trace data in TFILE format.
546 * tracepoint.h (struct trace_frame_write_ops): New.
547 (struct trace_file_write_ops): New.
548 (struct trace_file_writer): New.
549 (trace_save): Remove its declaration.
550 (trace_save_tfile): Declare it.
551 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
552 instead of trace_save.
554 2013-03-13 Pedro Alves <palves@redhat.com>
556 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
558 2013-03-13 Pedro Alves <palves@redhat.com>
560 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
562 * demangle.c (current_demangling_style_string): Make it const.
563 (set_demangling_command): Assert the demangling style is known.
564 Remove all handling of unknown styles. Set
565 'current_demangling_style_string' to an element of the
566 demangling_style_names array.
567 (set_demangling_style): Delete.
568 (_initialize_demangler): Set current_demangling_style_string to the
569 element of the demangling_style_names array that corresponds to
570 the default demangling style. Remove FIXME note. Don't call
571 set_demangling_style.
572 * gdb-demangle.h (set_demangling_style): Remove declaration.
574 2013-03-13 Pedro Alves <palves@redhat.com>
576 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
578 (ada_make_symbol_completion_list): Make "text0" parameter const.
579 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
580 * breakpoint.c (condition_completer): Make "text" and "word"
581 parameters const. Adjust.
582 (check_tracepoint_command): Adjust to validate_actionline
584 (catch_syscall_completer): Make "text" and "word" parameters
586 * cli/cli-cmds.c (show_user): Make "comname" local const.
587 (valid_command_p): Make "command" parameter const.
588 (alias_command): Make "alias_prefix" and "command_prefix" locals
590 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
591 (add_alias_cmd): Make "name" and "oldname" parameters const.
592 Adjust. No longer make copy of OLDNAME.
593 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
594 (add_setshow_cmd_full, add_setshow_enum_cmd)
595 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
596 (add_setshow_filename_cmd, add_setshow_string_cmd)
597 (add_setshow_string_noescape_cmd)
598 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
599 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
600 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
601 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
602 Make "name" parameter const.
603 (help_cmd): Rename "command" parameter to "arg". New const local
605 (find_cmd): Make "command" parameter const.
606 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
607 deprecated_cmd_warning prototype change.
608 (undef_cmd_error): Make "cmdtype" parameter const.
609 (lookup_cmd): Make "line" parameter const.
610 (deprecated_cmd_warning): Change type of "text" parameter to
611 pointer to const char, from pointer to pointer to char. Adjust.
612 (lookup_cmd_composition): Make "text" parameter const.
613 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
615 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
617 * cli/cli-script.c (validate_comname): Make "tem" local const.
618 (define_command): New const local "tem_c". Use it in calls to
620 (document_command): Make "tem" and "comfull" locals const.
621 (show_user_1): Make "prefix" and "name" parameters const.
622 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
624 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
625 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
626 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
627 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
628 (complete_on_enum, add_setshow_enum_cmd)
629 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
630 (add_setshow_filename_cmd, add_setshow_string_cmd)
631 (add_setshow_string_noescape_cmd)
632 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
633 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
634 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
635 Change prototypes, constifying strings.
636 * completer.c (noop_completer, filename_completer): Make "text"
637 and "prefix" parameters const.
638 (location_completer, expression_completer)
639 (complete_line_internal): Make "text" and "prefix" parameters
641 (command_completer, signal_completer): Make "text" and "prefix"
643 * completer.h (noop_completer, filename_completer)
644 (expression_completer, location_completer, command_completer)
645 (signal_completer): Change prototypes.
646 * corefile.c (complete_set_gnutarget): Make "text" and "word"
648 * cp-abi.c (cp_abi_completer): Likewise.
649 * expression.h (parse_expression_for_completion): Change
651 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
653 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
654 * infrun.c (handle_completer): Make "text" and "word" parameters
656 * interps.c (interpreter_completer): Make "text" and "word"
658 * language.h (struct language_defn)
659 <la_make_symbol_completion_list>: Make "text" and "word"
661 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
662 (parse_exp_in_context): Rename to ...
663 (parse_exp_in_context_1): ... this.
664 (parse_exp_in_context): Reimplement, with const hack from
666 (parse_expression_for_completion): Make "string" parameter const.
667 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
668 to pointer to const char. Adjust.
669 (print_command_1): Make "exp" parameter const.
670 (output_command): Rename to ...
671 (output_command_const): ... this. Make "exp" parameter const.
672 (output_command): Reimplement.
674 (display_command): Rename "exp" parameter to "arg". New "exp"
675 local, const version of "arg".
676 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
677 "cmd_name" local const.
678 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
680 (cmdpy_completer): Make "text" and "word" parameters const.
681 (gdbpy_parse_command_name): Make "prefix_text2" local const.
682 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
684 * remote.c (_initialize_remote): Make "cmd_name" local const.
685 * symtab.c (language_search_unquoted_string): Make "text" and "p"
686 parameters const. Adjust.
687 (completion_list_add_fields): Make "sym_text", "text" and "word"
689 (struct add_name_data) <sym_text, text, word>: Make fields const.
690 (default_make_symbol_completion_list_break_on): Make "text" and
691 "word" parameters const. Adjust locals.
692 (default_make_symbol_completion_list)
693 (make_symbol_completion_list, make_symbol_completion_type)
694 (make_symbol_completion_list_fn): Make "text" and "word"
696 (make_file_symbol_completion_list): Make "text", "word" and
697 "srcfile" parameters const. Adjust locals.
698 (add_filename_to_list): Make "text" and "word" parameters const.
699 (struct add_partial_filename_data) <text, word>: Make fields
701 (make_source_files_completion_list): Make "text" and "word"
703 * symtab.h (default_make_symbol_completion_list_break_on)
704 (default_make_symbol_completion_list, make_symbol_completion_list)
705 (make_symbol_completion_type enum type_code)
706 (make_symbol_completion_list_fn make_file_symbol_completion_list)
707 (make_source_files_completion_list): Change prototype.
708 * top.c (execute_command): Adjust to pass pointer to pointer to
709 const char to lookup_cmd, and to deprecated_cmd_warning prototype
711 (set_verbose): Make "cmdname" local const.
712 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
714 (validate_actionline): Make "line" parameter a pointer to const
716 (encode_actions_1): Make "action_exp" local const, and adjust.
717 (encode_actions): Adjust.
718 (replace_comma): Delete.
719 (trace_dump_actions): Make "action_exp" and "next_comma" locals
720 const, and adjust. Don't frob the action string while splitting
721 it at commas. Instead, make a copy of each split substring in
723 (trace_dump_command): Adjust to validate_actionline prototype
725 * tracepoint.h (decode_agent_options, decode_agent_options)
726 (encode_actions, validate_actionline): Change prototypes.
727 * valprint.h (output_command): Delete declaration.
728 (output_command_const): Declare.
729 * value.c (function_destroyer): Cast const away in xfree call.
731 2013-03-13 Pedro Alves <palves@redhat.com>
733 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
734 rather than casting 'const char * const *' to 'const char **'.
735 * ada-lex.l (processInt): Make "trailer" local const. Remove
736 'const char **' cast.
737 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
738 locals, and use those as strtol output pointer, instead than doing
739 invalid casts to from 'const char **' to 'char **'.
740 (_initialize_demangle): Remove cast.
741 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
742 locals, and use those as strtol output pointer, instead than doing
743 invalid casts to from 'const char **' to 'char **'.
744 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
746 * stap-probe.c (stap_parse_register_operand)
747 (stap_parse_single_operand): Likewise.
749 2013-03-13 Yao Qi <yao@codesourcery.com>
751 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
752 the last matched 'V' blcok in trace frame.
754 2013-03-12 Joel Brobecker <brobecker@adacore.com>
756 * NEWS: Create a new section for the next release branch.
757 Rename the section of the current branch, now that it has
760 2013-03-12 Joel Brobecker <brobecker@adacore.com>
762 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
763 * version.in: Bump version to 7.6.50.20130312-cvs.
765 2013-03-12 Keith Seitz <keiths@redhat.com>
767 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
768 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
769 Remove temporary copy of input string.
770 (mi_execute_command_wrapper): Make "cmd" const.
771 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
772 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
774 (mi_parse): Make "cmd" const.
776 * mi/mi-parse.h (mi_parse): Make "cmd" const.
778 2013-03-12 Keith Seitz <keiths@redhat.com>
780 * ada-lang.c (ada_read_renaming_var_value): Pass const
781 pointer to expression string to parse_exp_1.
782 (create_excep_cond_exprs): Likewise.
783 * ax-gdb.c (agent_eval_command_one): Likewise.
784 (maint_agent_printf_command): Likewise.
785 Constify much of the string handling/parsing.
786 * breakpoint.c (set_breakpoint_condition): Pass const
787 pointer to expression string to parse_exp_1.
788 (update_watchpoint): Likewise.
789 (parse_cmd_to_aexpr): Constify string handling.
790 Pass const pointer to parse_exp_1.
791 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
792 (find_condition_and_thread): Likewise.
794 (watch_command_1): Make "arg" const.
795 Constify string handling.
796 Copy the expression string instead of changing the input
798 (update_breakpoint_location): Pass const pointer to
800 * eval.c (parse_and_eval_address): Make "exp" const.
801 (parse_to_comma_and_eval): Make "expp" const.
802 (parse_and_eval): Make "exp" const.
803 * expression.h (parse_expression): Make argument const.
804 (parse_exp_1): Make first argument const.
805 * findcmd.c (parse_find_args): Treat "args" as const.
806 * linespec.c (parse_linespec): Pass const pointer to
807 linespec_expression_to_pc.
808 (linespec_expression_to_pc): Make "exp_ptr" const.
809 * parse.c (parse_exp_1): Make "stringptr" const.
810 Make a copy of the expression to pass to parse_exp_in_context until
811 this whole interface can be constified.
812 (parse_expression): Make "string" const.
813 * printcmd.c (ui_printf): Treat "arg" as const.
814 Handle const strings.
815 * tracepoint.c (validate_actionline): Pass const pointer to
816 all calls to parse_exp_1.
817 (encode_actions_1): Likewise.
818 * value.h (parse_to_comma_and_eval): Make argument const.
819 (parse_and_eval_address): Likewise.
820 (parse_and_eval): Likewise.
821 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
822 (varobj_set_value): Likewise.
823 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
824 constify string handling.
825 Pass const pointers to parse_and_eval_address and
826 parse_to_comman_and_eval.
827 * cli/cli-utils.c (skip_to_space): Rename to ...
828 (skip_to_space_const): ... this. Handle const strings.
829 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
831 (skip_to_space_const): Declare.
832 * common/format.c (parse_format_string): Make "arg" const.
833 Handle const strings.
834 * common/format.h (parse_format_string): Make "arg" const.
835 * gdbserver/ax.c (ax_printf): Make "format" const.
836 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
837 of the expression string.
839 2013-03-12 Hui Zhu <hui@codesourcery.com>
841 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
843 2013-03-12 Yao Qi <yao@codesourcery.com>
844 Hui Zhu <hui@codesourcery.com>
846 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
847 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
850 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
852 * ada-lex.l (rules): Only recognize 'thread' as a
853 delimiter when followed by numerals, as for c-exp.y.
854 Use new rewind_to_char function to rewind the input for
855 expression-delimiting tokens.
856 (rewind_to_char): New function.
858 2013-03-11 Pedro Alves <palves@redhat.com>
859 Jan Kratochvil <jan.kratochvil@redhat.com>
861 * configure: Regenerate.
862 * configure.ac (check dynamic export flag): Link python test with
865 2013-03-11 Doug Evans <dje@google.com>
866 Keith Seitz <keiths@redhat.com>
868 * linespec.c (find_linespec_symbols): Call find_function_symbols
869 first, and then call lookup_prefix_sym/find_method.
871 2013-03-11 Pedro Alves <palves@redhat.com>
873 * charset.c (convert_between_encodings): Don't cast between
874 different pointer to pointer types. Instead, make the 'inp' local
875 be of the type iconv expects.
876 (wchar_iterate): Don't cast between different pointer to pointer
877 types. Instead, use new pointer local of the type iconv expects.
878 * target.c (target_read_stralloc, target_fileio_read_stralloc):
879 Add new local of type char pointer, and use it to get a
880 char/string view of the byte buffer, instead of casting between
881 pointer to pointer types.
883 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
885 * remote.c (remote_set_trace_buffer_size): Move != operator
886 to the start of next line to fix an ARI warning.
888 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
890 * NEWS: Add record changes.
892 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
894 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
895 the instruction history disassembly.
896 * disasm.c (dump_insns): Omit the pc prefix, if requested.
897 * disasm.h (DISASSEMBLY_OMIT_PC): New.
899 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
901 * Makefile.in (SFILES): Add record-btrace.c
902 (COMMON_OBS): Add record-btrace.o
903 * record-btrace.c: New.
904 * objfiles.c: Include btrace.h.
905 (free_objfile): call btrace_free_objfile.
907 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
909 * target.c (target_call_history, target_call_history_from,
910 target_call_history_range): New.
911 * target.h (target_ops) <to_call_history, to_call_history_from,
912 to_call_history_range>: New fields.
913 (target_call_history, target_call_history_from,
914 target_call_history_range): New declaration.
915 * record.c (get_call_history_modifiers, cmd_record_call_history,
916 record_call_history_size): New.
917 (_initialize_record): Add the "record function-call-history" command.
918 Add "set/show record function-call-history-size" commands.
919 * record.h (record_print_flag): New.
921 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
923 * target.h (target_ops) <to_insn_history, to_insn_history_from,
924 to_insn_history_range>: New fields.
925 (target_insn_history): New.
926 (target_insn_history_from): New.
927 (target_insn_history_range): New.
928 * target.c (target_insn_history): New.
929 (target_insn_history_from): New.
930 (target_insn_history_range): New.
931 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
932 (record_insn_history_size): New.
933 (get_insn_number): New.
934 (get_context_size): New.
936 (get_insn_history_modifiers): New.
937 (cmd_record_insn_history): New.
938 (_initialize_record): Add "set/show record instruction-history-size"
939 command. Add "record instruction-history" command.
941 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
943 * record.h (record_disconnect): New.
944 (record_detach): New.
945 (record_mourn_inferior): New.
947 * record-full.c (record_disconnect, record_detach,
948 record_mourn_inferior, record_kill): Move to...
952 (record_unpush): New.
953 (cmd_record_stop): Call record_stop. Replace unpush_target
954 call with record_unpush call.
955 (record_disconnect, record_detach): Assert that the target
956 is of record stratum. Call record_unpush, record_stop, and
958 (record_mourn_inferior, record_kill): Assert that the target
959 is of record stratum. Call record_unpush and DEBUG.
961 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
963 * record-full.h, record-full.c (record_memory_query): Rename
965 (record_full_memory_query): ...this. Update all users.
966 (record_arch_list_add_reg): Rename to ...
967 (record_full_arch_list_add_reg): ...this. Update all users.
968 (record_arch_list_add_mem): Rename to ...
969 (record_full_arch_list_add_mem): ...this. Update all users.
970 (record_arch_list_add_end): Rename to ...
971 (record_full_arch_list_add_end): ...this. Update all users.
972 (record_gdb_operation_disable_set): Rename to ...
973 (record_full_gdb_operation_disable_set): ...this.
976 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
978 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
979 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
980 (RECORD_IS_REPLAY): Renamed to ...
981 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
982 (RECORD_FILE_MAGIC): Renamed to ...
983 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
984 (record_mem_entry): Renamed to ...
985 (record_full_mem_entry): ... this. Updated all users.
986 (record_reg_entry): Renamed to ...
987 (record_full_reg_entry): ... this. Updated all users.
988 (record_end_entry): Renamed to ...
989 (record_full_end_entry): ... this. Updated all users.
990 (record_type) <record_end, record_reg, record_mem>: Renamed
992 (record_full_type) <record_full_end, record_full_reg,
993 record_full_mem>: ... this. Updated all users.
994 (record_entry): Renamed to ...
995 (record_full_entry): ... this. Updated all users.
996 (record_core_buf_entry): Renamed to ...
997 (record_full_core_buf_entry): ... this. Updated all users.
998 (record_core_regbuf): Renamed to ...
999 (record_full_core_regbuf): ... this. Updated all users.
1000 (record_core_start): Renamed to ...
1001 (record_full_core_start): ... this. Updated all users.
1002 (record_core_end): Renamed to ...
1003 (record_full_core_end): ... this. Updated all users.
1004 (record_core_buf_list): Renamed to ...
1005 (record_full_core_buf_list): ... this. Updated all users.
1006 (record_first): Renamed to ...
1007 (record_full_first): ... this. Updated all users.
1008 (record_list): Renamed to ...
1009 (record_full_list): ... this. Updated all users.
1010 (record_arch_list_head): Renamed to ...
1011 (record_full_arch_list_head): ... this. Updated all users.
1012 (record_arch_list_tail): Renamed to ...
1013 (record_full_arch_list_tail): ... this. Updated all users.
1014 (record_stop_at_limit): Renamed to ...
1015 (record_full_stop_at_limit): ... this. Updated all users.
1016 (record_insn_max_num): Renamed to ...
1017 (record_full_insn_max_num): ... this. Updated all users.
1018 (record_insn_num): Renamed to ...
1019 (record_full_insn_num): ... this. Updated all users.
1020 (record_insn_count): Renamed to ...
1021 (record_full_insn_count): ... this. Updated all users.
1022 (record_ops): Renamed to ...
1023 (record_full_ops): ... this. Updated all users.
1024 (record_core_ops): Renamed to ...
1025 (record_full_core_ops): ... this. Updated all users.
1026 (set_record_cmdlist): Renamed to ...
1027 (set_record_full_cmdlist): ... this. Updated all users.
1028 (show_record_cmdlist): Renamed to ...
1029 (show_record_full_cmdlist): ... this. Updated all users.
1030 (record_cmdlist): Renamed to ...
1031 (record_full_cmdlist): ... this. Updated all users.
1032 (record_beneath_to_resume_ops): Renamed to ...
1033 (record_full_beneath_to_resume_ops): ... this. Updated all users.
1034 (record_beneath_to_resume): Renamed to ...
1035 (record_full_beneath_to_resume): ... this. Updated all users.
1036 (record_beneath_to_wait_ops): Renamed to ...
1037 (record_full_beneath_to_wait_ops): ... this. Updated all users.
1038 (record_beneath_to_wait): Renamed to ...
1039 (record_full_beneath_to_wait): ... this. Updated all users.
1040 (record_beneath_to_store_registers_ops): Renamed to ...
1041 (record_full_beneath_to_store_registers_ops): ... this.
1043 (record_beneath_to_store_registers): Renamed to ...
1044 (record_full_beneath_to_store_registers): ... this.
1046 (record_beneath_to_xfer_partial_ops): Renamed to ...
1047 (record_full_beneath_to_xfer_partial_ops): ... this.
1049 (record_beneath_to_xfer_partial): Renamed to ...
1050 (record_full_beneath_to_xfer_partial): ... this.
1052 (record_beneath_to_insert_breakpoint): Renamed to ...
1053 (record_full_beneath_to_insert_breakpoint): ... this.
1055 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
1056 (record_full_beneath_to_stopped_by_watchpoint): ... this.
1058 (record_beneath_to_stopped_data_address): Renamed to ...
1059 (record_full_beneath_to_stopped_data_address): ... this.
1061 (record_beneath_to_async): Renamed to ...
1062 (record_full_beneath_to_async): ... this. Updated all users.
1063 (record_goto_insn): Renamed to ...
1064 (record_full_goto_insn): ... this. Updated all users.
1065 (record_save): Renamed to ...
1066 (record_full_save): ... this. Updated all users.
1067 (record_reg_alloc): Renamed to ...
1068 (record_full_reg_alloc): ... this. Updated all users.
1069 (record_reg_release): Renamed to ...
1070 (record_full_reg_release): ... this. Updated all users.
1071 (record_mem_alloc): Renamed to ...
1072 (record_full_mem_alloc): ... this. Updated all users.
1073 (record_mem_release): Renamed to ...
1074 (record_full_mem_release): ... this. Updated all users.
1075 (record_end_alloc): Renamed to ...
1076 (record_full_end_alloc): ... this. Updated all users.
1077 (record_end_release): Renamed to ...
1078 (record_full_end_release): ... this. Updated all users.
1079 (record_entry_release): Renamed to ...
1080 (record_full_entry_release): ... this. Updated all users.
1081 (record_list_release): Renamed to ...
1082 (record_full_list_release): ... this. Updated all users.
1083 (record_list_release_following): Renamed to ...
1084 (record_full_list_release_following): ... this.
1086 (record_list_release_first): Renamed to ...
1087 (record_full_list_release_first): ... this. Updated all users.
1088 (record_arch_list_add): Renamed to ...
1089 (record_full_arch_list_add): ... this. Updated all users.
1090 (record_get_loc): Renamed to ...
1091 (record_full_get_loc): ... this. Updated all users.
1092 (record_check_insn_num): Renamed to ...
1093 (record_full_check_insn_num): ... this. Updated all users.
1094 (record_arch_list_cleanups): Renamed to ...
1095 (record_full_arch_list_cleanups): ... this. Updated all users.
1096 (record_message): Renamed to ...
1097 (record_full_message): ... this. Updated all users.
1098 (record_message_wrapper): Renamed to ...
1099 (record_full_message_wrapper): ... this. Updated all users.
1100 (record_message_wrapper_safe): Renamed to ...
1101 (record_full_message_wrapper_safe): ... this. Updated all users.
1102 (record_gdb_operation_disable): Renamed to ...
1103 (record_full_gdb_operation_disable): ... this. Updated all users.
1104 (record_hw_watchpoint): Renamed to ...
1105 (record_full_hw_watchpoint): ... this. Updated all users.
1106 (record_exec_insn): Renamed to ...
1107 (record_full_exec_insn): ... this. Updated all users.
1108 (record_restore): Renamed to ...
1109 (record_full_restore): ... this. Updated all users.
1110 (record_async_inferior_event_token): Renamed to ...
1111 (record_full_async_inferior_event_token): ... this.
1113 (record_async_inferior_event_handler): Renamed to ...
1114 (record_full_async_inferior_event_handler): ... this.
1116 (record_core_open_1): Renamed to ...
1117 (record_full_core_open_1): ... this. Updated all users.
1118 (record_open_1): Renamed to ...
1119 (record_full_open_1): ... this. Updated all users.
1120 (record_open): Renamed to ...
1121 (record_full_open): ... this. Updated all users.
1122 (record_close): Renamed to ...
1123 (record_full_close): ... this. Updated all users.
1124 (record_resume_step): Renamed to ...
1125 (record_full_resume_step): ... this. Updated all users.
1126 (record_resumed): Renamed to ...
1127 (record_full_resumed): ... this. Updated all users.
1128 (record_execution_dir): Renamed to ...
1129 (record_full_execution_dir): ... this. Updated all users.
1130 (record_resume): Renamed to ...
1131 (record_full_resume): ... this. Updated all users.
1132 (record_get_sig): Renamed to ...
1133 (record_full_get_sig): ... this. Updated all users.
1134 (record_sig_handler): Renamed to ...
1135 (record_full_sig_handler): ... this. Updated all users.
1136 (record_wait_cleanups): Renamed to ...
1137 (record_full_wait_cleanups): ... this. Updated all users.
1138 (record_wait_1): Renamed to ...
1139 (record_full_wait_1): ... this. Updated all users.
1140 (record_wait): Renamed to ...
1141 (record_full_wait): ... this. Updated all users.
1142 (record_stopped_by_watchpoint): Renamed to ...
1143 (record_full_stopped_by_watchpoint): ... this. Updated all users.
1144 (record_disconnect): Renamed to ...
1145 (record_full_disconnect): ... this. Updated all users.
1146 (record_detach): Renamed to ...
1147 (record_full_detach): ... this. Updated all users.
1148 (record_mourn_inferior): Renamed to ...
1149 (record_full_mourn_inferior): ... this. Updated all users.
1150 (record_kill): Renamed to ...
1151 (record_full_kill): ... this. Updated all users.
1152 (record_stopped_data_address): Renamed to ...
1153 (record_full_stopped_data_address): ... this. Updated all users.
1154 (record_registers_change): Renamed to ...
1155 (record_full_registers_change): ... this. Updated all users.
1156 (record_store_registers): Renamed to ...
1157 (record_full_store_registers): ... this. Updated all users.
1158 (record_xfer_partial): Renamed to ...
1159 (record_full_xfer_partial): ... this. Updated all users.
1160 (record_breakpoint): Renamed to ...
1161 (record_full_breakpoint): ... this. Updated all users.
1162 (record_breakpoint_p): Renamed to ...
1163 (record_full_breakpoint_p): ... this. Updated all users.
1164 (record_breakpoints): Renamed to ...
1165 (record_full_breakpoints): ... this. Updated all users.
1166 (record_sync_record_breakpoints): Renamed to ...
1167 (record_full_sync_record_breakpoints): ... this.
1169 (record_init_record_breakpoints): Renamed to ...
1170 (record_full_init_record_breakpoints): ... this.
1172 (record_insert_breakpoint): Renamed to ...
1173 (record_full_insert_breakpoint): ... this. Updated all users.
1174 (record_remove_breakpoint): Renamed to ...
1175 (record_full_remove_breakpoint): ... this. Updated all users.
1176 (record_can_execute_reverse): Renamed to ...
1177 (record_full_can_execute_reverse): ... this. Updated all users.
1178 (record_get_bookmark): Renamed to ...
1179 (record_full_get_bookmark): ... this. Updated all users.
1180 (record_goto_bookmark): Renamed to ...
1181 (record_full_goto_bookmark): ... this. Updated all users.
1182 (record_async): Renamed to ...
1183 (record_full_async): ... this. Updated all users.
1184 (record_can_async_p): Renamed to ...
1185 (record_full_can_async_p): ... this. Updated all users.
1186 (record_is_async_p): Renamed to ...
1187 (record_full_is_async_p): ... this. Updated all users.
1188 (record_execution_direction): Renamed to ...
1189 (record_full_execution_direction): ... this. Updated all users.
1190 (record_info): Renamed to ...
1191 (record_full_info): ... this. Updated all users.
1192 (record_delete): Renamed to ...
1193 (record_full_delete): ... this. Updated all users.
1194 (record_is_replaying): Renamed to ...
1195 (record_full_is_replaying): ... this. Updated all users.
1196 (record_goto_entry): Renamed to ...
1197 (record_full_goto_entry): ... this. Updated all users.
1198 (record_goto_begin): Renamed to ...
1199 (record_full_goto_begin): ... this. Updated all users.
1200 (record_goto_end): Renamed to ...
1201 (record_full_goto_end): ... this. Updated all users.
1202 (record_goto): Renamed to ...
1203 (record_full_goto): ... this. Updated all users.
1204 (init_record_ops): Renamed to ...
1205 (init_record_full_ops): ... this. Updated all users.
1206 (record_core_resume): Renamed to ...
1207 (record_full_core_resume): ... this. Updated all users.
1208 (record_core_kill): Renamed to ...
1209 (record_full_core_kill): ... this. Updated all users.
1210 (record_core_fetch_registers): Renamed to ...
1211 (record_full_core_fetch_registers): ... this. Updated all users.
1212 (record_core_prepare_to_store): Renamed to ...
1213 (record_full_core_prepare_to_store): ... this. Updated all users.
1214 (record_core_store_registers): Renamed to ...
1215 (record_full_core_store_registers): ... this. Updated all users.
1216 (record_core_xfer_partial): Renamed to ...
1217 (record_full_core_xfer_partial): ... this. Updated all users.
1218 (record_core_insert_breakpoint): Renamed to ...
1219 (record_full_core_insert_breakpoint): ... this. Updated all users.
1220 (record_core_remove_breakpoint): Renamed to ...
1221 (record_full_core_remove_breakpoint): ... this. Updated all users.
1222 (record_core_has_execution): Renamed to ...
1223 (record_full_core_has_execution): ... this. Updated all users.
1224 (init_record_core_ops): Renamed to ...
1225 (init_record_full_core_ops): ... this. Updated all users.
1226 (cmd_record_restore): Renamed to ...
1227 (cmd_record_full_restore): ... this. Updated all users.
1228 (record_save_cleanups): Renamed to ...
1229 (record_full_save_cleanups): ... this. Updated all users.
1230 (cmd_record_start): Renamed to ...
1231 (cmd_record_full_start): ... this. Updated all users.
1232 (set_record_insn_max_num): Renamed to ...
1233 (set_record_full_insn_max_num): ... this. Updated all users.
1234 (set_record_command): Renamed to ...
1235 (set_record_full_command): ... this. Updated all users.
1236 (show_record_command): Renamed to ...
1237 (show_record_full_command): ... this. Updated all users.
1238 (_initialize_record): Renamed to ...
1239 (_initialize_record_full): ... this. Updated all users.
1241 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1243 * record.h: Split into this and ...
1244 * record-full.h: ... this.
1245 * record.c: Split into this and ...
1246 * record-full.c: ... this.
1247 * target.h (target_ops): Add new fields to_info_record,
1248 to_save_record, to_delete_record, to_record_is_replaying,
1249 to_goto_record_begin, to_goto_record_end, to_goto_record.
1250 (target_info_record): New.
1251 (target_save_record): New.
1252 (target_supports_delete_record): New.
1253 (target_delete_record): New.
1254 (target_record_is_replaying): New.
1255 (target_goto_record_begin): New.
1256 (target_goto_record_end): New.
1257 (target_goto_record): New.
1258 * target.c (target_info_record): New.
1259 (target_save_record): New.
1260 (target_supports_delete_record): New.
1261 (target_delete_record): New.
1262 (target_record_is_replaying): New.
1263 (target_goto_record_begin): New.
1264 (target_goto_record_end): New.
1265 (target_goto_record): New.
1266 * record.h: Declare struct cmd_list_element.
1267 (record_cmdlist): New declaration.
1268 (set_record_cmdlist): New declaration.
1269 (show_record_cmdlist): New declaration.
1270 (info_record_cmdlist): New declaration.
1271 (cmd_record_goto): New declaration.
1272 * record.c: Remove unnecessary includes.
1274 (cmd_record_goto): Remove declaration.
1275 (record_cmdlist): Now extern. Initialize.
1276 (set_record_cmdlist): Now extern. Initialize.
1277 (show_record_cmdlist): Now extern. Initialize.
1278 (info_record_cmdlist): Now extern. Initialize.
1279 (find_record_target): New.
1280 (require_record_target): New.
1281 (cmd_record_start): Update.
1282 (cmd_record_delete): Remove target-specific code.
1283 Call target_delete_record.
1284 (cmd_record_stop): Unpush any record target.
1285 (set_record_insn_max_num): Move to record-full.c
1286 (set_record_command): Add comment.
1287 (show_record_command): Add comment.
1288 (info_record_command): Update comment.
1289 Remove target-specific code.
1290 Call the record target's to_info_record.
1291 (cmd_record_start): New.
1292 (cmd_record_goto): Now extern.
1293 Remove target-specific code.
1294 Call target_goto_begin, target_goto_end, or target_goto.
1295 (_initialize_record): Move record target ops initialization to
1297 Change "record" command help text.
1298 Move "record restore", "record set", and "record show" commands to
1300 * Makefile.in (SFILES): Add record-full.c.
1301 (HFILES_NO_SRCDIR): Add record-full.h.
1302 (COMMON_OBS): Add record-full.o.
1303 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
1304 * arm-tdep.c: Include record-full.h.
1305 * i386-linux-tdep.c: Include record-full.h instead of record.h.
1306 * i386-tdep.c: Include record-full.h.
1307 * infrun.c: Include record-full.h.
1308 * linux-record.c: Include record-full.h.
1309 * moxie-tdep.c: Include record-full.h.
1310 * record-full.c: Include record-full.h.
1311 Change module comment.
1312 (set_record_full_cmdlist): New.
1313 (show_record_full_cmdlist): New.
1314 (record_full_cmdlist): New.
1315 (record_goto_insn): New declaration.
1316 (record_save): New declaration.
1317 (record_check_insn_num): Change query string.
1319 (record_delete): New.
1320 (record_is_replaying): New.
1321 (record_goto_entry): New.
1322 (record_goto_begin): New.
1323 (record_goto_end): New.
1325 (init_record_ops): Update.
1326 (init_record_core_ops): Update.
1327 (cmd_record_save): Rename to record_save. Remove target and arg checks.
1328 (cmd_record_start): New.
1329 (set_record_insn_max_num): Moved from record.c
1330 (set_record_full_command): New.
1331 (show_record_full_command): New.
1332 (_initialize_record_full): New.
1334 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1336 * target.h (add_deprecated_target_alias): New.
1337 * target.c (add_deprecated_target_alias): New.
1339 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1341 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
1343 (linux_supports_btrace): Add kernel and
1345 (kernel_supports_btrace): New function.
1346 (cpu_supports_btrace): New function.
1347 (intel_supports_btrace): New function.
1349 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1351 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
1352 * remote.c: Include btrace.h.
1353 (struct btrace_target_info): New struct.
1354 (remote_supports_btrace): New function.
1355 (send_Qbtrace): New function.
1356 (remote_enable_btrace): New function.
1357 (remote_disable_btrace): New function.
1358 (remote_teardown_btrace): New function.
1359 (remote_read_btrace): New function.
1360 (init_remote_ops): Add btrace ops.
1361 (enum <unnamed>): Add btrace packets.
1362 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
1363 (_initialize_remote): Add packet configuration for branch tracing.
1365 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1367 * features/btrace.dtd: New file.
1368 * Makefile.in (XMLFILES): Add btrace.dtd.
1369 * btrace.h (parse_xml_btrace): New declaration.
1370 * btrace.c: Include xml-support.h.
1371 (parse_xml_btrace): New function.
1372 (parse_xml_btrace_block): New function.
1373 (block_attributes): New struct.
1374 (btrace_attributes): New struct.
1375 (btrace_children): New struct.
1376 (btrace_elements): New struct.
1378 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1380 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
1381 (amd64_linux_enable_btrace): New.
1382 (amd64_linux_disable_btrace): New.
1383 (amd64_linux_teardown_btrace): New.
1384 (_initialize_amd64_linux_nat): Initialize btrace ops.
1385 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
1386 (i386_linux_enable_btrace): New.
1387 (i386_linux_disable_btrace): New.
1388 (i386_linux_teardown_btrace): New.
1389 (_initialize_i386_linux_nat): Initialize btrace ops.
1390 * config/i386/linux.mh: Add linux-btrace.o.
1391 * config/i386/linux64.mh: Add linux-btrace.o.
1393 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1395 * common/linux_btrace.h: New file.
1396 * common/linux_btrace.c: New file.
1397 * Makefile.in (SFILES): Add btrace.c.
1398 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
1399 (COMMON_OBS): Add btrace.o.
1400 (linux-btrace.o): New rule.
1402 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1404 * target.h: Include btrace.h.
1405 (struct target_ops) <to_supports_btrace, to_enable_btrace,
1406 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
1407 * target.c (target_supports_btrace): New function.
1408 (target_enable_btrace): New function.
1409 (target_disable_btrace): New function.
1410 (target_teardown_btrace): New function.
1411 (target_read_btrace): New function.
1412 * btrace.h: New file.
1413 * btrace.c: New file.
1414 * Makefile.in: Add btrace.c.
1415 * gdbthread.h: Include btrace.h.
1416 (struct thread_info): Add btrace field.
1417 * thread.c: Include btrace.h.
1418 (clear_thread_inferior_resources): Call target_teardown_btrace.
1419 * common/btrace-common.h: New file.
1421 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1423 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
1424 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
1425 kill_status to outer block.
1427 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1429 Fix entry-values if the callee called a noreturn function.
1430 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
1431 get_frame_address_in_block. Add new comment.
1433 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1435 Fix entry-values in C++ across CUs.
1436 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
1437 lookup_minimal_symbol. Add a comment.
1439 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
1442 2013-03-08 Yao Qi <yao@codesourcery.com>
1444 * tracepoint.c (_initialize_tracepoint): Indent the code.
1446 2013-03-08 Pedro Alves <palves@redhat.com>
1448 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
1449 (parse_find_args, find_command): Change type of pattern buffer
1450 locals to 'gdb_byte *'.
1452 2013-03-08 Stan Shebs <stan@codesourcery.com>
1453 Hafiz Abid Qadeer <abidh@codesourcery.com>
1455 * NEWS: Mention set and show trace-buffer-size commands.
1457 * target.h (struct target_ops): New method
1458 to_set_trace_buffer_size.
1459 (target_set_trace_buffer_size): New macro.
1460 * target.c (update_current_target): Set up new method.
1461 * tracepoint.c (trace_buffer_size): New global.
1462 (start_tracing): Send it to the target.
1463 (set_trace_buffer_size): New function.
1464 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
1465 * remote.c (remote_set_trace_buffer_size): New function.
1466 (_initialize_remote): Use it.
1467 (QTBuffer:size) New remote command.
1468 (PACKET_QTBuffer_size): New enum.
1469 (remote_protocol_features): Add an entry for
1470 PACKET_QTBuffer_size.
1472 2013-03-08 Tom Tromey <tromey@redhat.com>
1474 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
1477 2013-03-07 Pedro Alves <palves@redhat.com>
1479 * target.c (target_read_stralloc, target_fileio_read_alloc):
1480 *Cast pointer to 'gdb_byte *' in target call.
1482 2013-03-07 Pedro Alves <palves@redhat.com>
1484 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
1487 2013-03-07 Keith Seitz <keiths@redhat.com>
1489 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
1490 (trace_pass_command): Likewise.
1491 * cli/cli-cmds.c: Include cli/cli-utils.h.
1492 (source_command): Use skip-spaces.
1493 (disassemble_command): Likewise.
1494 * findcmd.c: Include cli/cli-utils.h.
1495 (parse_find_args): Use skip_spaces.
1496 * go32-nat.c: Include cli/cli-utils.h.
1497 (go32_sldt): Use skip_spaces.
1498 (go32_sgdt): Likewise.
1499 (go32_sidt): Likewise.
1500 (go32_pde): Likewise.
1501 (go32_pte): Likewise.
1502 (go32_pte_for_address): Likewise.
1503 * infcmd.c: Include cli/cli-utils.h.
1504 (registers_info): Use skip_spaces.
1505 * linux-tdep.c (read_mapping): Use skip_spaces_const.
1506 (linux_info_proc): Likewise.
1507 * linux-thread-db.c: Include cli/cli-utils.h.
1508 (info_auto_load_libthread_db): Use skip_spaces_const.
1509 * m32r-rom.c: Include cli/cli-utils.h.
1510 (m32r_upload_command): Use skip_spaces.
1511 * maint.c: Include cli/cli-utils.h.
1512 (maintenance_translate_address): Use skip_spaces.
1513 * mi/mi-parse.c: Include cli/cli-utils.h.
1514 (mi_parse_argv): Use skip_spaces.
1515 (mi_parse): Likewise.
1516 * minsyms.c: Include cli/cli-utils.h.
1517 (msymbol_hash_iw): Use skip_spaces_const.
1518 * objc-lang.c: Include cli/cli-utils.h.
1519 (parse_selector): Use skip_spaces.
1520 (parse_method): Likewise.
1521 * python/python.c: Include cli/cli-utils.h.
1522 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
1523 (python_command)[HAVE_PYTHON]: Likewise.
1524 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
1525 * remote-m32r-sdi.c: Include cli/cli-utils.h.
1526 (m32r_load): Use skip_spaces.
1527 * serial.c: Include cli/cli-utils.h.
1528 (serial_open): Use skip_spaces_const.
1529 * stack.c: Include cli/cli-utils.h.
1530 (parse_frame_specification_1): Use skip_spaces_const.
1531 * symfile.c: Include cli/cli-utils.h.
1532 (set_ext_lang_command): Use skip_spaces.
1533 * symtab.c: Include cli/cli-utils.h.
1534 (rbreak_command): Use skip_spaces.
1535 * thread.c (thread_name_command): Use skip_spaces.
1536 * tracepoint.c (validate_actionline): Use skip_spaces.
1537 (encode_actions_1): Likewise.
1538 (trace_find_range_command): Likewise.
1539 (trace_find_outside_command): Likewise.
1540 (trace_dump_actions): Likewise.
1542 2013-03-07 Pedro Alves <palves@redhat.com>
1544 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
1545 * expprint.c (print_subexp_standard): Likewise.
1546 * utils.c (host_char_to_target): Likewise.
1547 * valprint.c (generic_emit_char, generic_printstr): Likewise.
1548 * varobj.c (value_get_print_value): Change type of local to char*.
1549 Cast it gdb_byte * in call to language printer.
1551 2013-03-07 Pedro Alves <palves@redhat.com>
1553 * charset.c (struct wchar_iterator) <input>: Change type to 'const
1555 (make_wchar_iterator): Remove cast to char*.
1556 (wchar_iterate): Change type of local.
1558 2013-03-07 Pedro Alves <palves@redhat.com>
1560 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
1561 for 'regcache->register_status'.
1563 2013-03-07 Pedro Alves <palves@redhat.com>
1565 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
1568 2013-03-07 Pedro Alves <palves@redhat.com>
1570 * stap-probe.c (handle_stap_probe): Add cast to char*.
1572 2013-03-07 Pedro Alves <palves@redhat.com>
1574 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
1575 RECORD_MSGRCV>: Pass a signed variable to
1576 regcache_raw_read_signed, instead of an unsigned one.
1578 2013-03-07 Pedro Alves <palves@redhat.com>
1580 * remote-notif.c (notif_debug): Change type to int.
1581 * remote-notif.h (notif_debug): Likewise.
1583 2013-03-07 Pedro Alves <palves@redhat.com>
1585 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
1587 2013-03-07 Pedro Alves <palves@redhat.com>
1589 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
1590 * remote.h (hex2bin, bin2hex): ... here.
1591 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
1593 2013-03-07 Eli Zaretskii <eliz@gnu.org>
1595 * utils.c (initialize_utils): Improve doc strings of "set/show
1596 width", "set/show height", and "set/show pagination".
1598 2013-03-06 Keith Seitz <keiths@redhat.com>
1600 * ax-gdb.c (gen_printf): Make FORMAT const.
1601 * ax-gdb.h (gen_printf): Likewise.
1602 * ax-general.c (ax_string): Make STR const.
1603 * ax.h (ax_string): Likewise.
1605 2013-03-06 Doug Evans <dje@google.com>
1607 * elfread.c (elf_symfile_read): Move debugging printf to more
1610 2013-03-06 Pedro Alves <palves@redhat.com>
1612 * python/py-utils.c (target_string_to_unicode): Delete function.
1613 * python/python-internal.h (target_string_to_unicode): Delete
1616 2013-03-06 Pierre Muller <muller@sourceware.org>
1618 * linespec.c (get_current_search_block): ARI fix, use (void)
1619 for empty parameter list.
1621 2013-03-05 Doug Evans <dje@google.com>
1623 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
1624 of old ada_lookup_symbol_list. In !full_search case, don't
1626 (ada_lookup_symbol_list): Delete arg full_search, all callers
1627 updated. Call ada_lookup_symbol_list_worker.
1628 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
1629 * ada-lang.h (ada_lookup_symbol_list): Update.
1630 * language.h (language_defn): Update comment for
1631 la_iterate_over_symbols.
1632 * linespec.c (iterate_over_file_blocks): New function.
1633 (iterate_over_all_matching_symtabs): Call it.
1634 (lookup_prefix_sym): Ditto.
1635 (get_current_search_block): New function.
1636 (get_search_block): Delete.
1637 (find_label_symbols): Call get_current_search_block.
1638 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
1639 * symtab.c (iterate_over_symbols): Don't search superblocks.
1641 2013-03-05 Yao Qi <yao@codesourcery.com>
1643 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
1644 parameter VAR's type from "unsigned int" to "int".
1645 * command.h (var_zuinteger_unlimited): Update its comments.
1646 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
1648 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1650 * NEWS: Mention new target x86_64-*-cygwin*.
1652 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1654 * configure.host: Add x86_64-*-cygwin* as host.
1655 * configure.tgt: Add x86_64-*-cygwin* as target.
1656 * config/i386/cygwin64.mh: New file.
1658 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1660 * linespec.c (decode_line_2): Fix duplicate request off by two message.
1662 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1664 * linespec.c (struct linespec_canonical_name): New.
1665 (struct linespec_state): Change canonical_names type to it.
1666 (add_sal_to_sals): Change variable canonical_name to canonical. Change
1667 xrealloc element size. Initialize the different CANONICAL fields.
1668 (canonical_to_fullform): New.
1669 (filter_results): Use it. Add variables canonical, fullform and
1671 (struct decode_line_2_item, decode_line_2_compare_items): New.
1672 (decode_line_2): Remove variables iter and item_names, add variables
1673 items and items_count. Modify the code for these new variables.
1675 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
1677 * coff-pe-read.c (read_pe_exported_syms): Don't return without
1680 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
1682 * tracepoint.c (build_traceframe_info): Add code for byte order.
1684 2013-03-02 Kevin Buettner <kevinb@redhat.com>
1686 * v850-tdep.c: (v850e2_register_name): Revise system register
1687 names to match current V850E2M architecture specifications.
1688 Update register number enum comments too.
1690 2013-03-01 Jiong Wang <jiwang@tilera.com>
1691 Pedro Alves <palves@redhat.com>
1693 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
1695 (tilegx_skip_prologue): Limit prologue analysis to section end.
1697 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1699 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
1702 2013-03-01 Pedro Alves <palves@redhat.com>
1704 Use gdb_byte for bytes from the program being debugged.
1706 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
1707 Change type of local 'buf' to gdb_byte.
1708 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
1709 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
1710 * cris-tdep.c (cris_sigcontext_addr)
1711 (cris_sigtramp_frame_unwind_cache): Likewise.
1712 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
1713 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
1715 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
1716 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
1717 (hppa32_hpux_search_dummy_call_sequence)
1718 (hppa_hpux_supply_save_state): Likewise.
1719 * hppa-linux-tdep.c (insns_match_pattern)
1720 (hppa_linux_find_global_pointer): Likewise.
1721 * hppa-tdep.c (hppa_in_function_epilogue_p)
1722 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
1723 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
1724 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
1725 (i386fbsd_collect_uthread): Likewise.
1726 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
1727 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
1728 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
1729 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
1730 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
1731 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
1732 (ia64_libunwind_frame_prev_register)
1733 (ia64_libunwind_sigtramp_frame_this_id)
1734 (ia64_find_global_pointer_from_dynamic_section)
1735 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
1736 (ia64_unwind_pc): Likewise.
1737 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
1738 * m68hc11-tdep.c (m68hc11_push_dummy_call)
1739 (m68hc11_extract_return_value): Likewise.
1740 * m68klinux-nat.c (fetch_register, store_register): Likewise.
1741 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
1742 (mep_get_insn, mep_push_dummy_call): Likewise.
1743 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
1744 (mips_linux_in_dynsym_stub): Likewise.
1745 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
1746 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
1747 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
1749 * remote-mips.c (mips_set_register): Likewise.
1750 * remote-sim.c (gdbsim_fetch_register): Likewise.
1751 * score-tdep.c (score7_fetch_inst): Change type of parameter
1752 'memblock' and local 'buf' to gdb_byte.
1753 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
1754 Change type of local 'buf' to gdb_byte. Adjust.
1755 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
1757 (score7_analyze_prologue): Change type of 'memblock' and
1758 'memblock_ptr' locals to gdb_byte*.
1759 * sh64-tdep.c (sh64_extract_return_value)
1760 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
1761 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
1762 * solib-pa64.c (pa64_solib_create_inferior_hook)
1763 (pa64_open_symbol_file_object): Remove local 'buf'.
1764 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
1765 (som_open_symbol_file_object): Likewise.
1766 * solib-spu.c (spu_current_sos): Likewise.
1767 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
1768 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
1769 (spu_store_registers): Likewise.
1770 * target.c (debug_print_register): Likewise.
1771 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
1772 * xstormy16-tdep.c (xstormy16_store_return_value)
1773 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
1774 (xstormy16_find_jmp_table_entry): Likewise.
1776 2013-03-01 Jiong Wang <jiwang@tilera.com>
1778 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
1779 (tilegx_gdbarch_init): Install it.
1781 2013-02-28 Tom Tromey <tromey@redhat.com>
1783 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
1786 2013-02-28 Doug Evans <dje@google.com>
1788 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
1789 * python/python.c (gdbpy_find_pc_line): Ditto.
1791 2013-02-28 Tom Tromey <tromey@redhat.com>
1793 * contrib/excheck.py: New file.
1794 * contrib/exsummary.py: New file.
1795 * contrib/gcc-with-excheck: New file.
1797 2013-02-28 Tom Tromey <tromey@redhat.com>
1799 * python/python.c (gdbpy_print_stack): Call begin_line and
1800 fprintf_filtered inside TRY_CATCH.
1802 2013-02-28 Tom Tromey <tromey@redhat.com>
1804 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
1807 2013-02-28 Tom Tromey <tromey@redhat.com>
1809 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
1810 frame_object_to_frame_info inside TRY_CATCH.
1812 2013-02-28 Tom Tromey <tromey@redhat.com>
1814 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
1817 2013-02-28 Tom Tromey <tromey@redhat.com>
1819 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
1821 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
1823 * windows-nat.c: Throughout, fix format strings and casts of
1824 printf-like functions to avoid type related warnings on all
1826 (handle_output_debug_string): Fetch context information address
1827 from debug string using string_to_core_addr.
1829 2013-02-27 Jiong Wang <jiwang@tilera.com>
1831 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
1832 * regformats/reg-tilegx32.dat: New.
1834 2013-02-27 Jiong Wang <jiwang@tilera.com>
1836 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
1838 2013-02-27 Jiong Wang <jiwang@tilera.com>
1840 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
1842 2013-02-27 Yao Qi <yao@codesourcery.com>
1843 Pedro Alves <palves@redhat.com>
1845 * tracepoint.c (tfile_trace_find): For tfind
1846 pc/tp/range/outside, look for the next trace frame instead of
1847 always starting from frame 0.
1849 2013-02-26 Anthony Green <green@moxielogic.com>
1851 * configure.tgt: Add support for moxie-*-rtems* target.
1853 2013-02-25 Pedro Alves <palves@redhat.com>
1855 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
1858 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
1860 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
1861 if $fp is used as the virtual frame pointer.
1863 2013-02-23 Alan Modra <amodra@gmail.com>
1865 * elfread.c (elf_symtab_read): Do not use udata.p here to find
1867 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
1868 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
1869 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
1870 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
1872 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
1875 * elfread.c (build_id_bfd_get): Make the return type const.
1876 (build_id_verify): Make the check parameter const.
1877 (build_id_to_debug_filename): Make the build_id parameter and variable
1879 (find_separate_debug_file_by_buildid): Make the variable build_id const.
1881 2013-02-21 Alan Modra <amodra@gmail.com>
1883 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
1885 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
1887 Add a new method 'disassemble' to gdb.Architecture class.
1888 * python/py-arch.c (archpy_disassmble): Implementation of the
1889 new method gdb.Architecture.disassemble.
1890 (arch_object_methods): Add entry for the new method.
1892 2013-02-20 Jiong Wang <jiwang@tilera.com>
1894 * MAINTAINERS (Write After Approval): Add myself to the list.
1896 2013-02-19 Pedro Alves <palves@redhat.com>
1898 Garbage collect 'struct monitor_ops'::load_routine.
1900 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
1901 * monitor.c (monitor_load): No longer call
1902 current_monitor->load_routine.
1903 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
1904 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
1905 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
1907 2013-02-19 Pedro Alves <palves@redhat.com>
1911 Harmonize with generic_load.
1913 * monitor.c: Include "readline/readline.h".
1914 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
1915 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
1916 long/strtol for the 'load_offset' local. Error out if no argument
1917 is given or if too many arguments are given. Tilde expand the
1918 passed in file name.
1920 2013-02-19 Kai Tietz <ktietz@redhat.com>
1923 * symfile.c (load_section_data): Change type of load_offset
1925 (generic_load): User strtoulst instead of strtoul for conversion
1928 2013-02-19 Jiong Wang <jiwang@tilera.com>
1930 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
1931 for return address, "lr" register, saved on stack.
1932 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
1933 after we invoke tilegx_analyze_prologue.
1935 2013-02-19 Jiong Wang <jiwang@tilera.com>
1937 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
1939 2013-02-19 Jiong Wang <jiwang@tilera.com>
1941 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
1943 2013-02-19 Jiong Wang <jiwang@tilera.com>
1945 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
1946 (tilegx_write_pc): New function.
1947 (tilegx_cannot_reference_register): Return zero if REGNO
1948 is TILEGX_FAULTNUM_REGNUM.
1949 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
1950 (tilegx_register_name): Add handling of "faultnum" register.
1951 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
1952 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
1953 handling of TILEGX_FAULTNUM_REGNUM.
1954 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
1956 2013-02-19 Jiong Wang <jiwang@tilera.com>
1958 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
1959 should be aligned to 64bit.
1961 2013-02-19 Kai Tietz <ktietz@redhat.com>
1963 * windows-nat.c (windows_xfer_memory): Fix debug-output
1966 2013-02-19 Lei Liu <lei.liu2@windriver.com>
1968 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
1969 Don't check DSP register number if HAVE_DSP is not set.
1971 2013-02-19 Alan Modra <amodra@gmail.com>
1973 * elfread.c (struct build_id): Delete. Use struct elf_build_id
1974 throughout file instead.
1975 (build_id_bfd_get): Update to use new elf_tdata build_id field.
1976 Don't xmalloc return value.
1977 (build_id_verify): Similarly. Don't xfree.
1978 (build_id_to_debug_filename): Update.
1979 (find_separate_debug_file_by_buildid): Update, don't xfree.
1981 2013-02-18 Tom Tromey <tromey@redhat.com>
1984 * dwarf2read.c (read_subrange_type): Use result of
1987 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
1989 * frame.c: Remove one extra white space after #include
1992 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1994 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
1996 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1998 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
1999 and dir commands into an if block.
2001 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
2003 * python/py-breakpoint (struct pybp_code): Use int instead of
2006 2013-02-15 Pedro Alves <pedro@codesourcery.com>
2007 Hafiz Abid Qadeer <abidh@codesourcery.com>
2009 * NEWS: Mention new field "trace-file".
2010 * tracepoint.c (trace_status_mi): Output "trace-file" field.
2011 (tfile_open): Record the trace file's filename in the trace
2013 (tfile_files_info): Mention the name of the trace file.
2014 Check the "filename" field explicitely.
2015 (trace_status_command): Explicitely check "filename" field.
2016 (trace_find_command): Ditto.
2017 (trace_find_pc_command): Ditto.
2018 (trace_find_tracepoint_command): Ditto.
2019 (trace_find_line_command): Ditto.
2020 (trace_find_range_command): Ditto.
2021 (trace_find_outside_command): Ditto.
2022 * tracepoint.h (struct trace_status) <from_file>: Rename it
2023 to "filename" and make it hold the trace file's filename
2024 instead of a boolean.
2025 * remote.c (remote_get_trace_status): Initialize "filename"
2026 field with NULL instead of 0.
2028 2013-02-15 Yao Qi <yao@codesourcery.com>
2030 * remote.c: Fix a typo.
2032 2013-02-14 Pierre Muller <muller@sourceware.org>
2034 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
2036 2013-02-14 Pedro Alves <palves@redhat.com>
2038 * utils.c (savestring): Don't #undef it. Move function to
2039 common/common-utils.c.
2040 * common/common-utils.c: Include gdb_string.h.
2041 (savestring): Move here from utils.c.
2042 * common/common-utils.h (savestring): Declare.
2044 2013-02-14 Pedro Alves <palves@redhat.com>
2046 * utils.c (savestring): Rename parameter 'size' to 'len'.
2048 2013-02-14 Pedro Alves <palves@redhat.com>
2049 Yufeng Zhang <yufeng.zhang@arm.com>
2051 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
2052 (aarch64_inferior_data, struct aarch64_inferior_data):
2054 (struct aarch64_process_info): New.
2055 (aarch64_process_list): New global.
2056 (aarch64_find_process_pid, aarch64_add_process)
2057 (aarch64_process_info_get): New functions.
2058 (aarch64_inferior_data_get): Delete.
2059 (aarch64_process_info_get): New function.
2060 (aarch64_forget_process): New function.
2061 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
2062 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
2063 aarch64_get_debug_reg_state.
2064 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
2065 instead of linux_nat_iterate_watchpoint_lwps.
2066 (aarch64_linux_new_fork): New function.
2067 (aarch64_linux_child_post_startup_inferior): Use
2068 aarch64_forget_process instead of aarch64_init_debug_reg_state.
2069 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
2070 (aarch64_linux_remove_hw_breakpoint)
2071 (aarch64_handle_aligned_watchpoint)
2072 (aarch64_handle_unaligned_watchpoint)
2073 (aarch64_linux_insert_watchpoint)
2074 (aarch64_linux_remove_watchpoint)
2075 (aarch64_linux_stopped_data_address): Adjust to pass the current
2076 process id to aarch64_debug_reg_state.
2077 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
2078 linux_nat_new_fork hook, and aarch64_forget_process as
2079 linux_nat_forget_process hook; remove the call to
2080 register_inferior_data_with_cleanup.
2082 2013-02-14 Pedro Alves <palves@redhat.com>
2084 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
2085 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
2088 2013-02-14 Pedro Alves <pedro@codesourcery.com>
2089 Hafiz Abid Qadeer <abidh@codesourcery.com>
2091 * tracepoint.h (validate_trace_state_variable_name): Declare.
2092 * tracepoint.c (validate_trace_state_variable_name): New.
2093 (trace_variable_command): Parse the trace state variable's name
2094 without using parse_expression. Do several validations.
2095 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
2096 trace state variable's name with parse_expression. Validate it.
2098 2013-02-14 Yao Qi <yao@codesourcery.com>
2100 * infcmd.c (breakpoint_proceeded): Remove it.
2102 2013-02-14 Yao Qi <yao@codesourcery.com>
2104 * tracepoint.c (end_actions_pseudocommand): Make it static.
2105 (while_stepping_pseudocommand): Likewise.
2106 * tracepoint.h (end_actions_pseudocommand): Remove the
2108 (while_stepping_pseudocommand): Likewise.
2110 2013-02-14 Yao Qi <yao@codesourcery.com>
2112 * cli/cli-decode.c (help_cmd): Remove the declaration of
2114 (help_all): Likewise.
2116 2013-02-13 Pedro Alves <palves@redhat.com>
2118 * amd64-linux-nat.c (update_debug_registers_callback):
2120 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
2122 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
2123 i386_debug_reg_state.
2124 (amd64_linux_new_fork): New function.
2125 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
2126 linux_nat_new_fork hook, and i386_forget_process as
2127 linux_nat_forget_process hook.
2128 * i386-linux-nat.c (update_debug_registers_callback):
2130 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
2132 (i386_linux_prepare_to_resume): Pass the lwp's pid to
2133 i386_debug_reg_state.
2134 (i386_linux_new_fork): New function.
2135 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
2136 linux_nat_new_fork hook, and i386_forget_process as
2137 linux_nat_forget_process hook.
2138 * i386-nat.c (i386_init_dregs): Delete.
2139 (i386_inferior_data, struct i386_inferior_data):
2141 (struct i386_process_info): New.
2142 (i386_process_list): New global.
2143 (i386_find_process_pid, i386_add_process, i386_process_info_get):
2145 (i386_inferior_data_get): Delete.
2146 (i386_process_info_get): New function.
2147 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
2148 (i386_forget_process): New function.
2149 (i386_cleanup_dregs): Rewrite.
2150 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
2151 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
2152 (i386_stopped_data_address, i386_insert_hw_breakpoint)
2153 (i386_remove_hw_breakpoint): Adjust to pass the current process id
2154 to i386_debug_reg_state.
2155 (i386_use_watchpoints): Don't register inferior data.
2156 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
2158 (i386_forget_process): Declare.
2159 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
2160 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
2162 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
2163 (add_initial_lwp): New, factored out from ...
2164 (add_lwp): ... this. Don't check the number of lwps before
2165 calling linux_nat_new_thread.
2166 (linux_nat_iterate_watchpoint_lwps): Delete.
2167 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
2168 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
2170 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
2172 (linux_nat_kill, linux_nat_mourn_inferior): Call
2173 linux_nat_forget_process.
2174 (linux_nat_set_new_fork, linux_nat_set_forget_process)
2175 (linux_nat_forget_process): New functions.
2176 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
2178 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
2179 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
2181 (linux_nat_set_new_fork, linux_nat_set_forget_process)
2182 (linux_nat_forget_process): New declarations.
2184 * amd64fbsd-nat.c (super_mourn_inferior): New global.
2185 (amd64fbsd_mourn_inferior): New function.
2186 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
2187 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
2189 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2191 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
2194 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2196 * aarch64-linux-nat.c (debug_reg_change_callback)
2197 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
2200 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2202 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
2205 2013-02-13 Pedro Alves <palves@redhat.com>
2206 Hafiz Abid Qadeer <abidh@codesourcery.com>
2208 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
2210 2013-02-12 Tom Tromey <tromey@redhat.com>
2213 * c-exp.y (lex_one_token): Initialize other fields of yylval on
2215 (classify_inner_name): Remove 'first_name' argument, add
2216 'context'. Remove unused variable.
2217 (yylex): Explicitly maintain the context type. Exit loop earlier
2218 if NAME result is seen.
2220 2013-02-12 Pedro Alves <palves@redhat.com>
2222 * amd64-darwin-tdep.c: Add (C) after Copyright.
2223 * cli/cli-cmds.h: Ditto.
2224 * cli/cli-decode.c: Ditto.
2225 * cli/cli-decode.h: Ditto.
2226 * cli/cli-dump.c: Ditto.
2227 * cli/cli-dump.h: Ditto.
2228 * cli/cli-interp.c: Ditto.
2229 * cli/cli-logging.c: Ditto.
2230 * cli/cli-script.c: Ditto.
2231 * cli/cli-script.h: Ditto.
2232 * cli/cli-setshow.c: Ditto.
2233 * cli/cli-setshow.h: Ditto.
2234 * cli/cli-utils.c: Ditto.
2235 * cli/cli-utils.h: Ditto.
2236 * config/alpha/nm-osf3.h: Ditto.
2237 * config/djgpp/djconfig.sh: Ditto.
2238 * config/i386/nm-fbsd.h: Ditto.
2239 * config/i386/nm-i386gnu.h: Ditto.
2240 * config/nm-linux.h: Ditto.
2241 * config/nm-nto.h: Ditto.
2242 * config/rs6000/nm-rs6000.h: Ditto.
2243 * config/sparc/nm-sol2.h: Ditto.
2244 * darwin-nat-info.c: Ditto.
2247 * gdb-demangle.h: Ditto.
2248 * i386-darwin-nat.c: Ditto.
2249 * i386-darwin-tdep.c: Ditto.
2250 * linux-fork.h: Ditto.
2251 * m32c-tdep.c: Ditto.
2252 * microblaze-linux-tdep.c: Ditto.
2253 * microblaze-rom.c: Ditto.
2254 * microblaze-tdep.c: Ditto.
2255 * microblaze-tdep.h: Ditto.
2256 * mips-linux-tdep.h: Ditto.
2257 * ppc-ravenscar-thread.c: Ditto.
2258 * ppc-ravenscar-thread.h: Ditto.
2259 * prologue-value.c: Ditto.
2260 * prologue-value.h: Ditto.
2261 * ravenscar-thread.c: Ditto.
2262 * ravenscar-thread.h: Ditto.
2263 * sparc-ravenscar-thread.c: Ditto.
2264 * sparc-ravenscar-thread.h: Ditto.
2265 * tilegx-linux-tdep.c: Ditto.
2266 * unwind_stop_reasons.def: Ditto.
2267 * windows-nat.h: Ditto.
2268 * xtensa-linux-tdep.c: Ditto.
2269 * xtensa-xtregs.c: Ditto.
2270 * regformats/regdat.sh: Ditto.
2271 * regformats/regdef.h: Ditto.
2273 2013-02-12 Pedro Alves <palves@redhat.com>
2275 * break-catch-sig.c: Update copyright years.
2277 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
2279 Add support for a destructor for ui_out data and use it to
2280 provide a ui_out destructor.
2281 * ui-out.h: Declare the new ui_out destructor.
2282 (ui_out_impl): Add a field for data destructor in ui_out_impl.
2283 * ui-out.c (default_data_destroy): Add a default data destructor
2285 (default_ui_out_impl): Set the new data_destroy field to
2286 default_data_destroy
2287 (uo_data_destroy): Local function which invokes the data
2288 destructor if present.
2289 (clear_table): Local function which clears the table data of a
2291 (ui_out_destroy): Public function which frees a ui_out object.
2292 (ui_out_table_end): Use the new clear_table function.
2293 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
2295 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
2298 2013-02-11 Doug Evans <dje@google.com>
2300 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
2301 (printf_decfloat): New function. Broken out from ui_printf.
2302 Remove unnecessary code to shift the entire format string down.
2303 (printf_pointer): New function.
2304 (ui_printf): Code to print C strings, wide C strings, decfloats,
2305 and pointers moved to separate functions.
2307 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
2309 * valops.c (value_assign): Handling bitfield offset in
2310 `lval_internalvar_component' case.
2312 2013-02-08 Doug Evans <dje@google.com>
2314 * common/format.c (parse_format_string): Fix whitespace.
2316 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
2318 * stack.c (return_command): Work around uninitialized variable
2321 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
2323 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
2324 number of the registers from 36 to 34.
2326 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
2328 * NEWS: Mention new AArch64 native and target support.
2330 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
2332 * MAINTAINERS (Write After Approval): Add myself.
2334 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
2335 Marcus Shawcroft <marcus.shawcroft@arm.com>
2336 Nigel Stephens <nigel.stephens@arm.com>
2337 Yufeng Zhang <yufeng.zhang@arm.com>
2339 * aarch64-linux-nat.c: New file.
2340 * config/aarch64/linux.mh: New file.
2341 * configure.host: Add AArch64.
2342 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
2344 2013-02-07 Doug Evans <dje@google.com>
2346 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
2347 disassemble command.
2349 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
2351 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
2352 set_gdbarch_fetch_tls_load_module_address.
2354 2013-02-06 David S. Miller <davem@davemloft.net>
2356 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
2357 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2358 * value.c (struct_return_convention): New function.
2359 (using_struct_return): Implement in terms of struct_return_convention.
2360 * value.h (struct_return_convention): Declare.
2361 * stack.c (return_command): Allow successful overriding of the return
2362 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2364 2013-02-06 Tom Tromey <tromey@redhat.com>
2366 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
2367 outside of TRY_CATCH.
2369 2013-02-06 Yao Qi <yao@codesourcery.com>
2371 * mi/mi-interp.c: Include "tracepoint.h".
2372 (mi_tsv_modified): Declare.
2373 (mi_tsv_created, mi_tsv_deleted): Update declaration.
2374 (mi_interpreter_init): Call observer_attach_tsv_modified.
2375 (mi_tsv_modified): New.
2376 (mi_tsv_created, mi_tsv_deleted): Update.
2377 * tracepoint.c (trace_variable_command): Call
2378 observer_notify_tsv_modified if the initial value of tsv is
2380 (delete_trace_state_variable): Call
2381 observer_notify_tsv_deleted earlier.
2382 (trace_variable_command): Caller update.
2383 (create_tsv_from_upload): Likewise.
2384 * observer.sh: Declare "struct trace_state_variable".
2386 * NEWS: Mention the new MI notification "=tsv-modified".
2388 2013-02-05 Doug Evans <dje@google.com>
2390 * completer.c (location_completer): Fix typo in comment.
2392 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
2394 * breakpoint.c (add_location_to_breakpoint): Insert the location with
2397 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
2399 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
2400 Refactor if statement to avoid trailing || operator.
2402 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
2404 * NEWS: Add PowerPC FreeBSD as a new native configuration.
2406 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
2408 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
2409 * configure.host: Add powerpc*-*-freebsd* target.
2410 * configure.tgt: Add target info for powerpc*-*-freebsd*.
2411 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
2412 * config/powerpc/fbsd.mh: New file.
2414 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
2415 Denys Vlasenko <dvlasenk@redhat.com>
2416 Pedro Alves <palves@redhat.com>
2418 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
2419 (struct elf_internal_linux_prpsinfo): Forward declare.
2420 * gdbarch.h, gdbarch.c: Regenerate.
2421 * linux-tdep.c: Include `cli/cli-utils.h'.
2422 (linux_fill_prpsinfo): New function.
2423 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
2424 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
2425 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
2426 depending on gdbarch pointer bitness.
2427 * ppc-linux-tdep.c: Include elf-bfd.h.
2428 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
2431 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2432 Marcus Shawcroft <marcus.shawcroft@arm.com>
2433 Nigel Stephens <nigel.stephens@arm.com>
2434 Yufeng Zhang <yufeng.zhang@arm.com>
2436 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
2438 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2439 Marcus Shawcroft <marcus.shawcroft@arm.com>
2440 Nigel Stephens <nigel.stephens@arm.com>
2441 Yufeng Zhang <yufeng.zhang@arm.com>
2443 * aarch64-newlib-tdep.c: New file.
2444 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
2446 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
2447 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
2448 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
2449 * osabi.c (gdb_osabi_names): Add "Newlib".
2451 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2452 Marcus Shawcroft <marcus.shawcroft@arm.com>
2453 Nigel Stephens <nigel.stephens@arm.com>
2454 Yufeng Zhang <yufeng.zhang@arm.com>
2456 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
2457 (ALLDEPFILES): Add aarch64-linux-tdep.c.
2458 * aarch64-linux-tdep.c: New file.
2459 * aarch64-linux-tdep.h: New file.
2460 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
2461 * configure.tgt: Add aarch64-none-linux-gnu.
2463 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2464 Marcus Shawcroft <marcus.shawcroft@arm.com>
2465 Nigel Stephens <nigel.stephens@arm.com>
2466 Yufeng Zhang <yufeng.zhang@arm.com>
2468 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
2469 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
2470 (ALLDEPFILES): Add aarch64-tdep.c.
2471 * aarch64-tdep.c: New file.
2472 * aarch64-tdep.h: New file.
2473 * configure.tgt: Add AArch64.
2474 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
2475 (aarch64-expedite): New definition.
2476 * features/aarch64-core.xml: New file.
2477 * features/aarch64-fpu.xml: New file.
2478 * features/aarch64-without-fpu.c: New file (generated).
2479 * features/aarch64-without-fpu.xml: New file.
2480 * features/aarch64.c: New file (generated).
2481 * features/aarch64.xml: New file.
2482 * regformats/aarch64-without-fpu.dat: New file (generated).
2483 * regformats/aarch64.dat: New file (generated).
2485 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2487 * contrib/expect-read1.c: New file.
2488 * contrib/expect-read1.sh: New file.
2490 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2492 * dwarf2read.c (file_file_name): New function with code from
2494 (file_full_name): Move most of the code to file_file_name.
2495 (macro_start_file): Rename variable full_name to file_name and use
2496 file_file_name for it. Add comp_dir parameter to new_macro_table.
2497 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
2498 macro_source_file->filename access by macro_source_fullname call.
2499 * macroscope.c (_initialize_macroscope): Update the new_macro_table
2501 * macrotab.c (struct macro_table): New field comp_dir.
2502 (macro_include): New variables link_fullname and source_fullname.
2503 Replace any macro_source_file->filename access by macro_source_fullname
2505 (macro_lookup_inclusion): Remove the partial filenames checking code.
2506 (check_for_redefinition): New variables source_fullname and
2507 found_key_fullname. Replace any macro_source_file->filename access by
2508 macro_source_fullname call.
2509 (macro_undef): New variables source_fullname and key_fullname. Replace
2510 any macro_source_file->filename access by macro_source_fullname call.
2511 (macro_lookup_definition): New variables retval and source_fullname.
2512 Replace any macro_source_file->filename access by macro_source_fullname
2514 (foreach_macro): New variable key_fullname. Replace any
2515 macro_source_file->filename access by macro_source_fullname call.
2516 (foreach_macro_in_scope): New variable datum_fullname. Replace any
2517 macro_source_file->filename access by macro_source_fullname call.
2518 (new_macro_table): Add parameter comp_dir. Initialize T with it.
2519 (macro_source_fullname): New function.
2520 * macrotab.h (struct macro_source_file): Extent the filename field
2522 (new_macro_table): New parameter comp_dir, add a comment for it.
2523 (macro_source_fullname): new declaration.
2525 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2527 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
2528 this_real_name to outer block. Use it also for
2529 compare_filenames_for_search.
2530 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
2531 with dw2_get_real_path for file_matcher, considering also
2532 BASENAMES_MAY_DIFFER.
2533 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
2535 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2537 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
2538 to the file_matcher parameter. Pass 0 to it.
2539 (dwarf2_create_include_psymtab): Copy also DIRNAME.
2540 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
2541 NULL psymtab_to_fullname result.
2542 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
2543 an expected filename instead.
2544 (expand_symtabs_matching_via_partial): Add basenames parameter to the
2545 file_matcher parameter. Call also psymtab_to_fullname, after newly
2546 considering BASENAMES_MAY_DIFFER.
2547 * source.c (rewrite_source_path): Remove static.
2548 * source.h (rewrite_source_path): New declaration.
2549 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
2550 the expand_symtabs_matching field. Comment it.
2551 * symtab.c (file_matches): New function comment. Add parameter
2552 basenames, implement it.
2553 (search_symbols_file_matches): Add basenames parameter. Update the
2554 file_matches caller.
2555 (search_symbols): Match FILES also against symtab_to_fullname.
2556 Optimize it for BASENAMES_MAY_DIFFER.
2558 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2560 * source.c (print_source_lines_base): Print for TUI also "fullname".
2561 * tui/tui-data.c (init_content_element): Change tui_locator_element
2563 * tui/tui-data.h (struct tui_locator_element): Likewise.
2564 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
2565 tui_update_locator_filename calls to tui_update_locator_fullname.
2566 Replace symtab->filename refererence by symtab_to_fullname call.
2567 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
2568 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
2569 field to full_name. Replace symtab->filename refererence by
2570 symtab_to_fullname call.
2571 (tui_show_symtab_source): Rename parameter to fullname. Change
2572 tui_locator_element field to full_name.
2573 * tui/tui-stack.c: Include source.h.
2574 (tui_set_locator_filename): Rename the declaration to ...
2575 (tui_set_locator_fullname): ... here. Rename its parameter to
2576 fullname, updates its comment.
2577 (tui_set_locator_info): Rename its parameter to fullname.
2578 (tui_set_locator_filename): Rename the definition to ...
2579 (tui_set_locator_fullname): ... here. Rename its parameter to
2580 fullname, updates its comment. Change tui_locator_element field to
2582 (tui_set_locator_info): Rename its parameter to fullname.
2583 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
2584 (tui_update_locator_filename): Rename to ...
2585 (tui_update_locator_fullname): ... here. Rename callee to
2586 tui_set_locator_fullname.
2587 (tui_show_frame_info): Replace symtab->filename refererence by
2588 symtab_to_fullname call.
2589 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
2590 (tui_update_locator_fullname): ... here.
2591 * tui/tui-winsource.c (tui_display_main): Rename the callee to
2592 tui_update_locator_fullname. Replace symtab->filename refererence by
2593 symtab_to_fullname call.
2594 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
2595 Rename the callee to tui_update_locator_fullname.
2596 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
2598 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2600 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
2601 by symtab_to_filename_for_display calls.
2602 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
2603 (clear_command): New variable sal_fullname, initialize it. Replace
2604 compare_filenames_for_search by filename_cmp with sal_fullname.
2605 (say_where, update_static_tracepoint): Replace symtab->filename
2606 refererences by symtab_to_filename_for_display calls.
2607 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
2609 * dwarf2read.c: Include source.h.
2610 (fixup_go_packaging): Replace symtab->filename refererences by
2611 symtab_to_filename_for_display calls.
2612 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
2613 Replace symtab->filename refererences by symtab_to_filename_for_display
2615 (create_sals_line_offset, convert_linespec_to_sals): New variable
2616 fullname, initialize it, replace symtab->filename reference by the
2618 * linux-fork.c: Include source.h.
2619 (info_checkpoints_command): Replace symtab->filename refererences by
2620 symtab_to_filename_for_display calls.
2621 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
2622 by symtab_to_filename_for_display calls.
2623 * mdebugread.c: Include source.h.
2624 (psymtab_to_symtab_1): Replace symtab->filename refererences by
2625 symtab_to_filename_for_display calls.
2626 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
2627 (mi_cmd_file_list_exec_source_files): Likewise.
2628 * printcmd.c: Include source.h.
2629 (build_address_symbolic): Replace symtab->filename refererences by
2630 symtab_to_filename_for_display calls.
2631 * psymtab.c (partial_map_symtabs_matching_filename)
2632 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
2633 with psymtab_to_fullname.
2634 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
2635 by symtab_to_filename_for_display calls.
2636 (stpy_get_filename): New variable filename, initialize it, use instead
2637 of symtab->filename refererences.
2638 (salpy_str): Make variable filename const char *. Replace
2639 symtab->filename refererences by symtab_to_filename_for_display calls.
2640 * skip.c: Include source.h and filenames.h.
2641 (skip_file_command): Remove const from the symtab variable. Replace
2642 symtab->filename refererences by symtab_to_fullname call.
2643 (function_name_is_marked_for_skip): New variables searched_for_fullname
2644 and fullname. Use them to search also with symtab's fullname.
2645 * source.c (find_source_lines): Replace symtab->filename refererences
2646 by symtab_to_filename_for_display calls.
2647 (print_source_lines_base): New variable filename, use it instead of
2648 symtab->filename. Replace symtab->filename refererences by
2649 symtab_to_filename_for_display calls.
2650 (line_info, forward_search_command): Replace symtab->filename
2651 refererences by symtab_to_filename_for_display calls.
2652 (reverse_search_command): Replace symtab->filename refererences by
2653 symtab_to_filename_for_display calls. New variable filename for it.
2654 * stack.c (frame_info): Likewise.
2655 * symmisc.c: Include source.h.
2656 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
2657 (maintenance_info_symtabs): Replace symtab->filename refererences by
2658 symtab_to_filename_for_display calls.
2659 * symtab.c (iterate_over_some_symtabs): Call
2660 compare_filenames_for_search also with symtab_to_fullname.
2661 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
2662 symtab->filename refererences by symtab_to_filename_for_display calls.
2663 (find_line_symtab): Replace symtab->filename refererences by
2664 symtab_to_filename_for_display calls.
2665 (file_matches): Replace filename_cmp by compare_filenames_for_search.
2666 (print_symbol_info): Make the last parameter const char *. New
2667 variable s_filename. Use it in the function.
2668 (symtab_symbol_info): Make the last_filename variable const char *.
2669 Replace symtab->filename refererences by symtab_to_filename_for_display
2671 (rbreak_command): New variable fullname. Use it. Replace
2672 symtab->filename refererence by symtab_to_filename_for_display call.
2673 * tracepoint.c (set_traceframe_context, trace_find_line_command)
2674 (print_one_static_tracepoint_marker): Replace symtab->filename
2675 refererences by symtab_to_filename_for_display calls.
2676 * tui/tui-source.c (tui_set_source_content): New variables filename and
2677 s_filename. Replace symtab->filename refererences by this variable.
2678 Replace other symtab->filename refererences by
2679 symtab_to_filename_for_display calls.
2681 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
2682 Jan Kratochvil <jan.kratochvil@redhat.com>
2684 Add a new variable that controls a way in which filenames are
2686 * NEWS (set filename-display): New entry.
2687 * source.c (filename_display_basename, filename_display_relative)
2688 (filename_display_absolute, filename_display_kind_names)
2689 (filename_display_string, show_filename_display_string)
2690 (symtab_to_filename_for_display): New.
2691 (_initialize_source): Added initialization of 'filename-display'
2693 * source.h (symtab_to_filename_for_display): Added declaration.
2694 * stack.c (print_frame): Added new variable and calling of a new
2695 function and condition with this variable. Changed third argument of
2696 calling of a function.
2698 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2700 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
2701 Rename field reference filename to fullname.
2702 * tui/tui-data.h (struct tui_source_info): Rename field filename to
2703 fullname. New comment for it.
2704 * tui/tui-source.c (tui_set_source_content): Rename field reference
2705 filename to fullname. Initialize field by symtab_to_fullname now.
2706 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
2707 reference filename to fullname. Use symtab_to_fullname during
2710 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2713 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
2714 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
2715 filename to fullname. Rename variable this_name to this_fullname.
2716 Lowercase FILENAME_CMP call.
2717 (dw2_find_symbol_file): New comment for the returned string.
2718 (dwarf2_gdb_index_functions): Rename the function to
2719 dw2_expand_symtabs_with_fullname.
2720 * psymtab.c (read_psymtabs_with_filename): Rename to ...
2721 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
2723 (psym_functions): Rename the function to read_psymtabs_with_fullname.
2724 * symfile.h (struct quick_symbol_functions): Rename field
2725 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
2726 parameter filename to fullname. Document returned string meaning for
2728 * symtab.c (find_line_symtab): Rename the called function to
2729 expand_symtabs_with_fullname.
2731 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2734 * breakpoint.c (clear_command): Remove variable is_abs, unify the
2735 call of filename_cmp with compare_filenames_for_search.
2736 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
2737 is_abs, unify the call of FILENAME_CMP with
2738 compare_filenames_for_search. New gdb_asserts for real_path and name.
2739 Unify the call of compare_filenames_for_search with FILENAME_CMP.
2740 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
2741 * symfile.h (struct quick_symbol_functions): Extend the comment for
2742 map_symtabs_matching_filename.
2743 * symtab.c (compare_filenames_for_search): Remove the function comment
2744 relative path requirement. Handle absolute filenames, with a comment.
2745 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
2746 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
2747 real_path and name. Unify the call of compare_filenames_for_search
2749 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
2751 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2754 * breakpoint.c (print_breakpoint_location): Replace bp_location field
2755 source_file references by symtab field references. Remove variables
2757 (momentary_breakpoint_from_master, add_location_to_breakpoint):
2758 (clear_command, say_where): Replace bp_location field source_file
2759 references by symtab field references.
2760 (bp_location_dtor): Remove the source_file reference.
2761 (update_static_tracepoint): Replace bp_location field source_file
2762 references by symtab field references.
2763 (breakpoint_free_objfile): New function.
2764 * breakpoint.h (struct bp_location): Extend the comment for line_number.
2765 Replace the field source_file by field symtab, extend its comment.
2766 (breakpoint_free_objfile): New declaration.
2767 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
2768 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
2769 field source_file references by symtab field references.
2771 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2773 Replace xfullpath calls by gdb_realpath calls.
2774 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
2776 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
2777 Remove it from the iterate_over_some_symtabs call.
2778 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
2779 Remove it from the dw2_map_expand_apply calls, remove a block handling
2781 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
2782 Remove it from the iterate_over_some_symtabs call.
2783 (partial_map_symtabs_matching_filename): Remove parameter full_path.
2784 Remove it from the partial_map_expand_apply calls, remove a block
2785 handling it. Drop gdb_realpath call and cleanups from the real_path
2787 * source.c (openp): Drop the comment part about xfullpath. Replace
2788 xfullpath calls by gdb_realpath calls.
2789 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
2790 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
2791 from method map_symtabs_matching_filename and its comment.
2792 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
2794 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
2795 remove it also from the function comment, remove a block handling it.
2796 Drop gdb_realpath call and cleanups from the real_path handling.
2797 (iterate_over_symtabs): Drop variable full_path and its use.
2798 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
2799 * utils.c (xfullpath): Remove.
2800 * utils.h (xfullpath): Remove.
2802 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
2804 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
2805 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
2806 (ALLDEPFILES): Add ppc64-tdep.c.
2807 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
2808 ppc64-tdep.o to gdb_target_obs.
2809 * ppc64-tdep.h: New file.
2810 * ppc64-tdep.c: New file.
2811 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
2812 ppc-linux-tdep.c to here.
2813 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
2814 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
2815 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
2816 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
2817 from ppc-linux-tdep.c to here.
2818 (ppc64_convert_from_func_ptr_addr): Rename from
2819 ppc64_linux_convert_from_func_ptr_addr to
2820 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
2823 (read_insn): Move from ppc-linux-tdep.c to here.
2824 (insns_match_pattern, insn_d_field, insn_ds_field): Move
2825 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
2826 * ppc-linux-tdep.c: Include ppc64-tdep.h.
2827 Removed above functions.
2828 (ppc_linux_init_abi): Adjust.
2830 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2832 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
2834 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2836 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
2838 2013-02-01 Pedro Alves <palves@redhat.com>
2840 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
2841 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
2843 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2845 * elfread.c (elf_symfile_read): Limit separate debug info additions to
2846 files with no separate debug info.
2847 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
2848 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
2849 only for files with no separate debug info.
2851 2013-01-31 Tom Tromey <tromey@redhat.com>
2853 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
2855 (struct jit_program_space_data): Rename from jit_inferior_data.
2857 (get_jit_program_space_data): Rename from get_jit_inferior_data.
2858 Change return type. Attach data to program space.
2859 (jit_program_space_data_cleanup): Rename from
2860 jit_inferior_data_cleanup; change argument type.
2861 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
2863 (jit_register_code): Update.
2864 (jit_update_inferior_cache): Remove.
2865 (jit_breakpoint_deleted): Get jit data from the location's program
2867 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
2868 'ps_data', change type.
2869 (jit_inferior_init, jit_breakpoint_re_set_internal)
2870 (jit_event_handler): Update.
2871 (free_objfile_data): Get data from objfile's program space.
2872 (_initialize_jit): Update.
2874 2013-01-31 Tom Tromey <tromey@redhat.com>
2877 * jit.c (struct jit_inferior_data) <cached_code_address,
2878 jit_breakpoint>: New fields.
2879 (jit_breakpoint_re_set_internal): Fix logging. Only create
2880 breakpoint if cached address has changed.
2881 (jit_update_inferior_cache, jit_breakpoint_deleted): New
2883 (_initialize_jit): Register breakpoint deleted observer.
2885 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2887 * infrun.c (handle_syscall_event): Remove unused gdbarch.
2888 (save_infcall_suspend_state): Ifdef out unused inf.
2889 (restore_infcall_suspend_state): Ifdef out unused inf.
2890 * jit.c (jit_register_code): Remove unused i, b, inf_data.
2891 (jit_frame_sniffer): Remove unused inf_data.
2893 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2895 * c-exp.y (classify_inner_name): Remove unused type.
2896 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
2897 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
2899 (c_get_string): Remove unused kind.
2900 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
2902 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2904 * charset.c (intermediate_encoding): Remove unused i.
2905 * completer.c (signal_completer): Remove unused i.
2906 * continuations.c (discard_my_continuations_1): Remove unused
2908 * corelow.c (core_close): Remove unuseD name.
2909 (get_core_siginfo): Remove unused pid.
2910 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
2912 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
2913 (loclist_describe_location): Remove unused first.
2914 * event-top.c (command_line_handler): Remove unused got_eof.
2915 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
2916 (resize_section_table): Remove unused old_value.
2917 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
2918 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
2919 * i386-tdep.c (i386_process_record): Remove unused rex.
2920 * infcmd.c (get_return_value): Remove unused uiout.
2921 * jv-lang.c (type_from_class): Remove unused is_array.
2922 * jv-valprint.c (java_val_print): Remove unused i.
2923 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
2924 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
2925 * m2-typeprint.c (m2_print_type): Remove unused code.
2926 * macroexp.c (get_character_constant): Remove unused body_start.
2927 (macro_stringify): Remove unused result.
2928 * objc-lang.c (find_methods): Remove unused gdbarch.
2929 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
2930 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
2931 * stack.c (print_frame_args): Remove unused summary.
2932 * thread.c (thread_apply_command): Remove unused p.
2933 * valarith.c (value_x_unop): Remove unused mangle_ptr.
2934 * valops.c (search_struct_method): Remove unused skip.
2935 * valprint.c (generic_val_print): Remove unused byte_order.
2936 * varobj.c (varobj_update): Remove unused changed.
2937 * cli/cli-cmds.c (complete_command): Remove unused next_item.
2938 (alias_command): Remove unused c.
2939 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
2940 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
2942 (mi_cmd_data_write_memory): Remove unused word_format.
2943 (mi_cmd_data_write_memory_bytes): Remove unused r.
2944 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
2946 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
2947 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
2950 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2952 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
2953 * symtab.c (iterate_over_symtabs): Remove unused s.
2954 (find_pc_sect_symtab): Remove unused pspAce.
2955 (find_pc_sect_line): Remove unused alt_symtab.
2956 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
2957 (completion_list_add_name): Remove unused newsize.
2959 2013-01-31 Tom Tromey <tromey@redhat.com>
2962 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
2965 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2967 * target.c (target_read_string): Remove unused origlen.
2969 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2971 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
2972 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
2973 * ax-general.c (ax_print): Remove unused is_float.
2974 * blockframe.c (block_innermost_frame): Remove unused start, end.
2975 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
2977 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2979 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
2980 (svr4_read_so_list): Remove unused lmo.
2981 * solib-target.c (solib_target_relocate_section_addresses): Remove
2984 2013-01-30 Tom Tromey <tromey@redhat.com>
2986 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
2988 2013-01-30 Tom Tromey <tromey@redhat.com>
2990 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
2991 * utils.c (gnu_debuglink_crc32): Remove.
2992 * utils.h (gnu_debuglink_crc32): Don't declare.
2994 2013-01-30 Tom Tromey <tromey@redhat.com>
2996 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
2997 (read_structure_type, read_enumeration_type): Remove cast.
2999 2013-01-30 Tom Tromey <tromey@redhat.com>
3001 * dwarf2read.c (read_namespace_type): Remove cast.
3002 (read_typedef): Likewise.
3004 2013-01-29 Tom Tromey <tromey@redhat.com>
3006 * dwarf2read.c (free_dwo_file): Remove assert.
3008 2013-01-29 Tom Tromey <tromey@redhat.com>
3010 * value.c (deprecated_set_value_modifiable): Remove.
3011 * value.h (deprecated_set_value_modifiable): Remove.
3013 2013-01-28 Doug Evans <dje@google.com>
3015 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
3016 to addresses from dwo files.
3018 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
3020 * valops.c (find_overload_match): Remove unused argument 'lax'.
3021 * value.h: Remove unused argument 'lax' from the declaration of
3022 find_overload_match.
3023 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
3024 to find_overload_match.
3025 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
3026 argument to find_overload_match.
3028 2013-01-25 Tom Tromey <tromey@redhat.com>
3030 * dwarf2read.c (processing_has_namespace_info): Remove.
3031 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
3032 (process_die, read_func_scope, dwarf2_start_symtab)
3033 (new_symbol_full): Update.
3035 2013-01-25 Tom Tromey <tromey@redhat.com>
3037 * cp-namespace.c (cp_set_block_scope): Remove.
3038 * cp-support.h (cp_set_block_scope): Remove.
3039 * dbxread.c: Include block.h.
3040 (cp_set_block_scope): New function.
3041 (process_one_symbol): Update.
3042 * dwarf2read.c (read_func_scope): Use block_set_scope.
3044 2013-01-25 Pedro Alves <palves@redhat.com>
3046 * remote.c (add_current_inferior_and_thread): Tweak comment.
3048 2013-01-25 Tom Tromey <tromey@redhat.com>
3050 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
3051 (cp_add_using_directive): Add 'copy_names' argument.
3052 * cp-support.h (cp_add_using_directive): Update.
3053 (struct using_direct) <import_src, import_dest, alias,
3054 declaration>: Now const.
3055 * dwarf2read.c (read_import_statement): Use obconcat.
3056 Don't copy names passed to cp_add_using_directive.
3058 2013-01-25 Tom Tromey <tromey@redhat.com>
3060 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
3062 2013-01-25 Pedro Alves <palves@redhat.com>
3064 * remote.c (stop_reply_extract_thread): New.
3065 (add_current_inferior_and_thread): New parameter 'wait_status'.
3067 (remote_start_remote): Pass wait status to
3068 add_current_inferior_and_thread.
3069 (extended_remote_run): Update comment.
3070 (extended_remote_create_inferior_1): Pass wait status to
3071 add_current_inferior_and_thread.
3073 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
3074 Ulrich Weigand <uweigand@de.ibm.com>
3076 * valarith.c (value_vector_widen): New function for replicating a
3077 scalar into a vector.
3078 (value_binop): Use value_vector_widen to widen scalar to vector
3079 rather than casting, this better matches gcc C behaviour.
3080 * valops.c (value_casst): Update logic for casting between vector
3081 types, and for casting from scalar to vector, try to match gcc C
3083 * value.h (value_vector_widen): Declare.
3084 * opencl-lang.c (opencl_value_cast): New opencl specific casting
3085 function, handle special case for casting scalar to vector.
3086 (opencl_relop): Use opencl_value_cast.
3087 (evaluate_subexp_opencl): Use opencl_value_cast instead of
3088 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
3089 in order to use opencl_value_cast.
3091 2013-01-25 Yao Qi <yao@codesourcery.com>
3093 * event-loop.c: Include "queue.h".
3094 (gdb_event_p): New typedef.
3095 (DECLARE_QUEUE_P): Use.
3096 (DEFINE_QUEUE_P): Use.
3097 (async_queue_event): Remove.
3098 (gdb_event_xfree): New.
3099 (initialize_event_loop): New.
3100 (process_event): Use QUEUE macros.
3101 (event_queue): Remove.
3102 (gdb_wait_for_event): Caller update.
3103 (check_async_event_handlers): Likewise.
3104 (poll_timers): Likewise.
3105 * event-loop.h (initialize_event_loop): Declare.
3106 * event-loop.c (gdb_event_xfree): New.
3107 * top.c (gdb_init): Call initialize_event_loop.
3109 2013-01-25 Yao Qi <yao@codesourcery.com>
3111 * event-loop.c (async_queue_event): Remove one parameter
3112 'position'. Remove code handling 'position' == TAIL.
3113 (gdb_wait_for_event): Caller update.
3114 (check_async_event_handlers): Caller update.
3115 (poll_timers): Caller update.
3116 * event-loop.h (enum queue_position): Remove.
3118 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
3120 * MAINTAINERS: Update my email.
3122 2013-01-25 Yao Qi <yao@codesourcery.com>
3124 * main.c (print_gdb_help): Remove "--epoch" from the help
3127 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
3129 * symtab.c (skip_prologue_using_sal): Consider a file
3130 change the same as an increased line number
3132 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
3134 * MAINTAINERS (Write After Approval): Add myself to the list.
3136 2013-01-24 Tom Tromey <tromey@redhat.com>
3138 * ada-lang.h (ada_decode_symbol): Make return type const.
3139 * ada-lang.c (ada_decode_symbol): Likewise.
3141 2013-01-23 Doug Evans <dje@google.com>
3143 * linespec.c (find_linespec_symbols): Make static.
3145 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
3147 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
3148 type on float conversion for complex type.
3150 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
3152 Add a new class gdb.Architecture which exposes GDB's
3153 internal representation of architecture via GDB Python API.
3154 * Makefile.in: Add entries corresponding to the new file
3156 * NEWS (Python Scripting): Add entries for the new class
3157 gdb.Architecture and the new method gdb.Frame.architecture.
3158 * python/py-arch.c: Implement gdb.Architecture class.
3159 * python/py-frame.c (frapy_arch): Implement the method
3160 gdb.Frame.architecture().
3161 (frame_object_methods): Add 'architecture' to the method table.
3162 * python/python-internal.h: Add declarations of new utility
3164 * python/python.c (_initialize_python): Initialize
3165 gdb.Architecture class.
3167 2013-01-23 Doug Evans <dje@google.com>
3169 Work around binutils/15021.
3170 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
3171 type_unit_group out of union s. All uses updated.
3172 (read_index_from_section): Watch for index version 8.
3173 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
3175 (write_psymtabs_to_index): Increment version number to 8.
3177 2013-01-22 Pedro Alves <palves@redhat.com>
3179 * annotate.c (breakpoint_changed): Skip if breakpoint is not
3182 2013-01-22 Pedro Alves <palves@redhat.com>
3184 * annotate.c (annotate_breakpoints_changed): Rename to ...
3185 (annotate_breakpoints_invalid): ... this. Make static.
3186 (breakpoint_changed): Adjust.
3187 (_initialize_annotate): Always install the observers. Install a
3188 "breakpoint_created" observer.
3189 * annotate.h (annotate_breakpoints_changed): Delete declaration.
3190 * breakpoint.c (set_breakpoint_condition)
3191 (breakpoint_set_commands, do_map_commands_command)
3192 (init_raw_breakpoint, clear_command, set_ignore_count)
3193 (enable_breakpoint_disp): No longer call
3194 annotate_breakpoints_changed.
3196 2013-01-22 Pedro Alves <palves@redhat.com>
3198 * annotate.c: Include "inferior.h".
3199 (frames_invalid_emitted)
3200 (breakpoints_invalid_emitted): New globals.
3201 (async_background_execution_p): New function.
3202 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
3203 emitting the annotation if it has already been emitted.
3204 (annotate_display_prompt): New function.
3205 * annotate.h (annotate_display_prompt): New declaration.
3206 * event-top.c: Include annotate.h.
3207 (display_gdb_prompt): Call annotate_display_prompt.
3209 2013-01-22 Pedro Alves <palves@redhat.com>
3211 * annotate.c (ignore_count_changed): Delete.
3212 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
3213 (annotate_ignore_count_change): Delete.
3214 (annotate_stopped): Don't emit a delayed breakpoints-changed
3216 * annotate.h (annotate_ignore_count_change): Delete.
3217 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
3218 annotate_ignore_count_change.
3220 2013-01-22 Tom Tromey <tromey@redhat.com>
3222 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
3223 require_rvalue for a register location.
3225 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
3227 * breakpoint.c (print_one_breakpoint_location): Add MI
3228 field 'thread-groups' when printing a breakpoint.
3229 (output_thread_groups): New function.
3231 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
3233 * python/lib/gdb/commands/explore.py
3234 (CompoundExplorer.explore_expr): Correct the name of a method
3236 (ExploreTypeCommand.invoke): Add a missing 'return'.
3238 2013-01-21 Tom Tromey <tromey@redhat.com>
3240 * gdb_obstack.h (obconcat): Move declaration here, from...
3241 * symfile.h (obconcat): ... here.
3242 * gdb_obstack.c: New file.
3243 (obconcat): Move from...
3244 * symfile.c (obconcat): ... here.
3245 * Makefile.in (SFILES): Add gdb_obstack.c.
3246 (COMMON_OBS): Add gdb_obstack.o.
3248 2013-01-21 Tom Tromey <tromey@redhat.com>
3250 * symfile.h (obsavestring): Don't declare.
3251 * symfile.c (obsavestring): Remove.
3252 * ada-exp.y: Use obstack_copy0, not obsavestring.
3253 * ada-lang.c: Use obstack_copy0, not obsavestring.
3254 * coffread.c: Use obstack_copy0, not obsavestring.
3255 * cp-namespace.c: Use obstack_copy0, not obsavestring.
3256 * dbxread.c: Use obstack_copy0, not obsavestring.
3257 * dwarf2read.c: Use obstack_copy0, not obsavestring.
3258 * jit.c: Use obstack_copy0, not obsavestring.
3259 * mdebugread.c: Use obstack_copy0, not obsavestring.
3260 * psymtab.c: Use obstack_copy0, not obsavestring.
3261 * stabsread.c: Use obstack_copy0, not obsavestring.
3262 * xcoffread.c: Use obstack_copy0, not obsavestring.
3264 2013-01-21 Tom Tromey <tromey@redhat.com>
3266 * dwarf2read.c (fixup_go_packaging): Save package name
3268 * gdbtypes.c (init_type): Don't copy name.
3270 2013-01-21 Tom Tromey <tromey@redhat.com>
3272 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
3274 (struct attribute) <u.str>: Now const.
3275 (struct fnfieldlist) <name>: Now const.
3276 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
3277 (partial_die_parent_scope): Make return type const.
3278 (partial_die_full_name, add_partial_symbol): Update.
3279 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
3281 (find_file_and_directory): Make 'name' and 'comp_dir' const.
3282 (read_file_scope, read_func_scope, dwarf2_add_field)
3283 (dwarf2_add_member_fn, read_structure_type)
3284 (process_enumeration_scope, read_array_type, read_module_type)
3285 (read_base_type, read_subrange_type): Update.
3286 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
3287 (new_symbol_full, guess_full_die_structure_name): Update.
3288 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
3289 (dwarf2_name): Return const type.
3290 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
3293 2013-01-21 Tom Tromey <tromey@redhat.com>
3295 * gdbtypes.c (init_type): Make 'name' const.
3296 * gdbtypes.h (init_type): Update.
3298 2013-01-21 Tom Tromey <tromey@redhat.com>
3300 * buildsym.c (patch_subfile_names): Use set_last_source_file.
3301 (start_symtab): Make 'name' and 'dirname' const. Use
3302 set_last_source_file.
3303 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
3304 (last_source_file): Define. Now static.
3305 (set_last_source_file, get_last_source_file): New functions.
3306 * buildsym.h (last_source_file): Don't declare.
3307 (start_symtab): Update.
3308 (set_last_source_file, get_last_source_file): Declare.
3309 * coffread.c (complete_symtab): Use set_last_source_file.
3310 (coff_end_symtab): Likewise.
3311 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
3312 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
3313 set_last_source_file.
3314 (process_one_symbol): Use get_last_source_file.
3315 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
3316 (psymtab_to_symtab_1): Use get_last_source_file.
3317 * xcoffread.c (process_linenos): Use get_last_source_file.
3318 (complete_symtab): Use set_last_source_file.
3319 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
3320 (scan_xcoff_symtab): Use set_last_source_file.
3322 2013-01-21 Tom Tromey <tromey@redhat.com>
3324 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
3325 (symbol_set_names): Remove casts. Handle field const-ness.
3327 2013-01-21 Tom Tromey <tromey@redhat.com>
3329 * dwarf2read.c (new_symbol_full): Remove cast.
3330 * symtab.c (symbol_set_demangled_name): Make 'name' const.
3331 * symtab.h (symbol_set_demangled_name): Update.
3333 2013-01-21 Tom Tromey <tromey@redhat.com>
3335 * main.c (captured_main): Call bfd_init.
3337 2013-01-21 Tom Tromey <tromey@redhat.com>
3339 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
3340 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
3341 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
3344 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3346 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
3348 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3350 Fix gdb.fortran/common-block.exp crash in PIE mode.
3351 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
3353 * f-valprint.c (info_common_command_for_block): Expect
3354 LOC_COMMON_BLOCK in gdb_assert.
3355 * symtab.h (struct general_symbol_info): Update comment for the
3356 common_block member.
3357 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
3358 (enum address_class): New member LOC_COMMON_BLOCK.
3360 2013-01-18 David Blaikie <dblaikie@gmail.com>
3362 * MAINTAINERS (Write After Approval): Add "David Blaikie".
3364 2013-01-18 Tom Tromey <tromey@redhat.com>
3367 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
3368 Call require_rvalue.
3370 2013-01-18 Yao Qi <yao@codesourcery.com>
3372 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
3373 (dbx_read_symtab): New declaration.
3374 (dbx_psymtab_to_symtab): Delete.
3375 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
3376 Rename parameter PST to SELF. Exchanged two parameters.
3377 (start_psymtab): Caller update.
3378 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
3379 (dwarf2_read_symtab): New declaration.
3380 (dwarf2_psymtab_to_symtab): Delete.
3381 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
3382 Rename parameter PST to SELF. Exchanged two parameters.
3383 (create_partial_symtab): Caller update.
3384 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
3385 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
3386 Rename parameter PST to SELF. Exchanged two parameters.
3387 (parse_partial_symbols, new_psymtab): Caller update.
3388 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
3390 * psymtab.c (psymtab_to_symtab): Caller update.
3391 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
3392 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
3393 Rename parameter PST to SELF. Exchanged two parameters.
3394 (xcoff_start_psymtab): Caller update.
3396 2013-01-18 Yao Qi <yao@codesourcery.com>
3398 * infrun.c (proceed): Rename local variable 'oneproc' to
3401 2013-01-17 Doug Evans <dje@google.com>
3403 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
3404 (dw2_build_type_unit_groups): Delete. All uses updated.
3406 * symtab.h (struct symbol_search): Add comment.
3408 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3410 * symtab.c (compare_filenames_for_search): New comment for
3413 2013-01-17 Tom Tromey <tromey@redhat.com>
3415 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
3417 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3419 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
3420 initialize it by existing make_cleanup. Call new do_cleanups.
3422 2013-01-17 Tom Tromey <tromey@redhat.com>
3424 * cp-abi.c (cp_abi_completer): New function.
3425 (_initialize_cp_abi): Set completer for "set cp-abi".
3427 2013-01-17 Tom Tromey <tromey@redhat.com>
3429 * mem-break.c: Remove obsolete comment.
3430 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
3432 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3434 * jit.c (jit_reader_load_command): Interpret the jit reader name
3435 as an absolute path if it begins with a forward slash.
3437 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3441 * jit.c (finalize_symtab): Ensure that only the global block has a
3444 2013-01-17 Pedro Alves <palves@redhat.com>
3446 * acinclude.m4: Include ../config/plugins.m4,
3447 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
3448 * Makefile.in (aclocal_m4_deps): Update.
3449 * aclocal.m4: Renegerate.
3451 2013-01-16 Doug Evans <dje@google.com>
3453 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
3455 2013-01-16 Pedro Alves <palves@redhat.com>
3456 Tom Tromey <tromey@redhat.com>
3459 * NEWS: Add "catch signal".
3460 * breakpoint.c (base_breakpoint_ops): No longer static.
3461 (bpstat_explains_signal): New function.
3462 (init_catchpoint): No longer static.
3463 (base_breakpoint_explains_signal): New function.
3464 (base_breakpoint_ops): Initialize new field.
3465 * breakpoint.h (enum bpstat_signal_value): New.
3466 (struct breakpoint_ops) <explains_signal>: New field.
3467 (bpstat_explains_signal): Remove macro, declare as function.
3468 (base_breakpoint_ops, init_catchpoint): Declare.
3469 * break-catch-sig.c: New file.
3470 * inferior.h (signal_catch_update): Declare.
3471 * infrun.c (signal_catch): New global.
3472 (handle_syscall_event): Update for change to
3473 bpstat_explains_signal.
3474 (handle_inferior_event): Likewise. Always handle random signals
3476 (signal_cache_update): Check signal_catch.
3477 (signal_catch_update): New function.
3478 (_initialize_infrun): Initialize signal_catch.
3479 * Makefile.in (SFILES): Add break-catch-sig.c.
3480 (COMMON_OBS): Add break-catch-sig.o.
3482 2013-01-16 Tom Tromey <tromey@redhat.com>
3484 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
3485 (print_one_catch_solib, print_one_catch_syscall)
3486 (print_one_catch_exec, print_one_exception_catchpoint): Emit
3489 2013-01-16 Yao Qi <yao@codesourcery.com>
3491 * printcmd.c (current_display_number): Make it static.
3493 2013-01-16 Yao Qi <yao@codesourcery.com>
3495 * infcmd.c (step_once): Don't check '!single_inst' as it was
3498 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3500 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
3502 2013-01-14 Tom Tromey <tromey@redhat.com>
3504 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
3506 * command.h (add_setshow_string_noescape_cmd): Update.
3507 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
3508 (complete_set_gnutarget): New function.
3509 (_initialize_core): Set the "set gnutarget" completer.
3511 2013-01-14 Tom Tromey <tromey@redhat.com>
3514 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
3515 (c_type_print_modifier): Likewise.
3516 * dwarf2read.c (read_tag_restrict_type): New function.
3517 (read_type_die_1): Handle DW_TAG_restrict_type.
3518 * gdbtypes.c (make_restrict_type): New function.
3519 (recursive_dump_type): Handle TYPE_RESTRICT.
3520 * gdbtypes.h (enum type_flag_values): Renumber.
3521 (enum type_instance_flag_value): Add
3522 TYPE_INSTANCE_FLAG_RESTRICT.
3523 (TYPE_RESTRICT): New macro.
3524 (make_restrict_type): Declare.
3526 2013-01-14 Tom Tromey <tromey@redhat.com>
3529 * psymtab.c (struct psymtab_state): New.
3530 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
3532 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
3533 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
3535 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
3536 Pedro Alves <palves@redhat.com>
3540 * remote.c (remote_threads_info): Make a copy of the reply from
3541 qfThreadInfo and use that instead of rs->buf.
3543 2013-01-14 Yao Qi <yao@codesourcery.com>
3545 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
3546 (dbx_psymtab_to_symtab): Likewise.
3547 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
3548 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
3549 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
3551 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3553 * parse.c (parse_exp_in_context): New variable inner_chain. Call
3554 make_cleanup_restore_current_language. Call set_language. Move
3555 OLD_CHAIN and INNER_CHAIN cleanups.
3556 * utils.c (do_restore_current_language)
3557 (make_cleanup_restore_current_language): New functions.
3558 * utils.h (make_cleanup_restore_current_language): New declaration.
3560 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3562 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
3565 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
3566 non-existing files if FILENAME is already absolute.
3568 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3570 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
3571 fputs_filtered. Append trailing newline.
3573 2013-01-11 Yao Qi <yao@codesourcery.com>
3574 Stan Shebs <stan@codesourcery.com>
3576 * psymtab.c (init_psymbol_list): Clarify the comment.
3578 2013-01-11 Yao Qi <yao@codesourcery.com>
3580 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
3581 (update_dprintf_command_list): Assert that 'printf_line' is
3582 non-null. Remove condition check.
3584 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3587 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
3589 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
3591 * tui/tui-source.h (tui_source_is_displayed): Likewise.
3593 2013-01-09 Anthony Green <green@moxielogic.com>
3595 * cp-abi.c (cplus_print_vtable): Don't return value from void
3597 * ada-lang.c (re_set_catch_assert): Ditto.
3599 2013-01-09 Doug Evans <dje@google.com>
3601 * symfile.h (quick_symbol_functions): Delete member
3602 pre_expand_symtabs_matching. All uses removed.
3603 * dwarf2read.c (dw2_lookup_symbol): Implement.
3604 (dw2_do_expand_symtabs_matching): Delete.
3605 (dw2_pre_expand_symtabs_matching): Delete.
3606 (struct dw2_symtab_iterator): New type.
3607 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
3608 (dw2_expand_symtabs_for_function): Rewrite.
3609 (dwarf2_gdb_index_functions): Update.
3610 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
3611 (psym_functions): Update.
3613 2013-01-09 Tom Tromey <tromey@redhat.com>
3615 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
3616 * configure: Rebuild.
3617 * configure.ac: Add somread.o to the build if BFD has SOM
3619 * somread.c: Include som/aout.h, not syms.h.
3620 (som_symtab_read): Use som_external_symbol_dictionary_record.
3621 Unpack records manually.
3622 (_initialize_somread): Declare.
3624 2012-01-08 Mike Frysinger <vapier@gentoo.org>
3626 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
3627 Cast return_address to 64bits.
3629 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
3631 * printcmd.c: Remove define of function output_command.
3632 * tracepoint.c: Remove extern of function output_command.
3633 * valprint.h: (output_command): New extern.
3635 2013-01-07 Tom Tromey <tromey@redhat.com>
3637 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
3639 (objc_language_defn): Use c_printchar, c_printstr,
3642 2013-01-07 Tom Tromey <tromey@redhat.com>
3646 * ada-valprint.c (printstr, print_field_values): Remove
3648 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
3650 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
3652 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
3653 * main.c (captured_main): Remove "epoch" argument.
3654 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
3655 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
3656 * p-valprint.c (pascal_object_print_value_fields): Remove
3658 * printcmd.c (print_command_1): Remove 'inspect' argument.
3659 (print_command, call_command): Update.
3660 (inspect_command): Remove.
3661 (_initialize_printcmd): Make "inspect" an alias for "print".
3662 * top.c (epoch_interface): Remove.
3663 * top.h (epoch_interface): Remove.
3664 * valprint.c (user_print_options): Update.
3665 (print_converted_chars_to_obstack): Remove "inspect_it" code.
3666 * valprint.h (struct value_print_options) <inspect_it>: Remove
3669 2013-01-04 Tom Tromey <tromey@redhat.com>
3671 * valprint.h (read_string): Add 'extern'.
3673 2013-01-07 Joel Brobecker <brobecker@adacore.com>
3675 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
3676 used to decide whether to define darwin_read_dyld_info or not.
3678 2013-01-03 Pierre Muller <muller@sourceware.org>
3680 * main.c (relocate_gdb_directory): Avoid calling stat function
3683 2013-01-03 Yao Qi <yao@codesourcery.com>
3685 * psymtab.c (fixup_psymbol_section): Update declaration.
3686 (fixup_psymbol_section): Remove code returning value.
3688 2013-01-03 Yao Qi <yao@codesourcery.com>
3690 * symtab.h: Remove some out of date comments.
3691 (enum exception_event_kind): Move it ...
3692 * breakpoint.c: ... here.
3694 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
3697 * darwin-nat.c (darwin_read_dyld_info): Only build if
3698 TASK_DYLD_INFO_COUNT is defined.
3699 (darwin_xfer_partial): Call darwin_read_dyld_info only if
3700 TASK_DYLD_INFO_COUNT is defined.
3702 2013-01-02 Tom Tromey <tromey@redhat.com>
3704 * symfile.h (struct ecoff_debug_hack): Remove.
3705 * objfiles.c: Don't include mdebugread.h.
3707 2013-01-02 Tom Tromey <tromey@redhat.com>
3709 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
3710 * configure.ac: Check for Mach-O support in BFD. Update
3712 * configure: Rebuild.
3714 2013-01-02 Tom Tromey <tromey@redhat.com>
3716 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
3717 * configure.ac: Use GDB_AC_CHECK_BFD.
3718 * configure: Rebuild.
3720 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
3722 * MAINTAINERS: Update my email.
3724 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3726 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
3728 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3730 * rs6000-nat.c (bss_data_overlap): New function.
3731 (vmap_symtab): Use it to adjust the .bss section's offset.
3733 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3735 Update year range in copyright notice of all files.
3737 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
3739 * top.c (print_gdb_version): Update copyright year.
3741 For older changes see ChangeLog-2012.
3747 version-control: never
projects / deliverable / binutils-gdb.git / blob