1 2008-03-14 Pedro Alves <pedro@codesourcery.com>
3 * top.c (execute_command): Disable break and stop
4 commands in async mode.
6 2008-03-14 Pedro Alves <pedro@codesourcery.com>
9 2008-03-14 Pedro Alves <pedro@codesourcery.com>
10 * inf-loop.c (inferior_event_handler): Don't include remote.h.
11 Call target_stop in the INF_QUIT_REQ case.
12 * Makefile.in (inf-loop.o): Update.
14 2008-03-14 Pedro Alves <pedro@codesourcery.com>
16 * inf-loop.c (inferior_event_handler): Don't include remote.h.
17 Call target_stop in the INF_QUIT_REQ case.
18 * Makefile.in (inf-loop.o): Update.
20 2008-03-14 Pedro Alves <pedro@codesourcery.com>
22 * top.c (execute_command): Enable break, info and interrupt
23 commands in async mode.
25 2008-03-13 Vladimir Prus <vladimir@codesourcery.com>
26 Daniel Jacobowitz <dan@codesourcery.com>
28 * breakpoint.h (breakpoint_restore_shadows): New
30 * breakpoint.c (breakpoint_restore_shadows): New.
31 (read_memory_nobpt): Delete.
32 * gdbcore.h (read_memory_nobpt): Delete declaration.
33 * target.c (memory_xfer_partial): Call
34 breakpoint_restore_shadows.
35 (restore_show_memory_breakpoints)
36 (make_show_memory_beakpoints_cleanup): New.
37 (show_memory_breakpoints): New.
38 * target.h (make_show_memory_beakpoints_cleanup): Declare.
39 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint):
40 Make sure we see memory breakpoints when checking if
41 breakpoint is still there.
42 * alpha-tdep.c, alphanbsd-tdep.c, frame.c, frv-tdep.c,
43 hppa-linux-tdep.c, hppa-tdep.c, i386-linux-nat.c, i386-tdep.c,
44 m68klinux-tdep.c, mips-tdep.c, mn10300-tdep.c, s390-tdep.c,
45 sparc-tdep.c: Use target_read_memory instead of read_memory_nobpt.
47 2008-03-12 Pedro Alves <pedro@codesourcery.com>
49 * thread.c (add_thread): Use printf_unfiltered to print.
51 2008-03-12 Joel Brobecker <brobecker@gnat.com>
53 * sol-thread.c: Replace use of TM_I386SOL2_H by an expression
54 that is true only on x86-solaris and x86_64-solaris.
55 * procfs.c: Likewise. Move procfs_find_LDT_entry up together
56 with proc_get_LDT_entry.
58 2008-03-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
60 * configure.ac (AC_CHECK_FUNCS): Add check for setsid.
61 * config.in, configure: Regenerate.
62 * fork-child.c (fork_inferior): Call create_tty_session.
63 * inflow.c (new_tty): Set controlling terminal with TIOCSCTTY.
64 (create_tty_session): New function.
65 * terminal.h: Declare create_tty_session.
67 2008-03-12 Alan Modra <amodra@bigpond.net.au>
70 * elfread.c (elf_symtab_read): Make shndx an unsigned int.
71 * mipsread.c: Include elf/internal.h.
72 (read_alphacoff_dynamic_symtab): Map external reserved sym_shndx
75 2008-03-11 Markus Deuling <deuling@de.ibm.com>
77 * win32-nat.c (do_win32_fetch_inferior_registers): Use get_regcache_arch
78 to get at the current architecture and at the target specific vector.
79 Add target specific vector to I387_FISEG_REGNUM and I387_FOP_REGNUM and
80 remove define of I387_ST0_REGNUM.
82 * amd64-tdep.c (I387_ST0_REGNUM): Remove define.
84 (amd64_supply_fxsave, amd64_collect_fxsave): Use get_regcache_arch to
85 get at the current architecture
86 (I387_FISEG_REGNUM, I387_FOSEG_REGNUM): Add target specific vector as
89 * i386-tdep.c: Remove various define's and undef's of I387_ST0_REGNUM,
90 I387_NUM_XMM_REGS and I387_MM0_REGNUM.
92 (I387_NUM_XMM_REGS, I387_XMM0_REGNUM, I387_MXCSR_REGNUM,
93 I387_ST0_REGNUM, I387_FCTRL_REGNUM, I387_MM0_REGNUM,
94 (I387_FSTAT_REGNUM): Add target specific vector as parameter.
96 (i386_register_name, i386_dbx_reg_to_regnum): Use gdbarch_tdep to get
97 at the target specific vector.
99 (i386_get_longjmp_target): Use get_frame_arch to get at the current
100 architecture. Use gdbarch_tdep to get at the target specific vector.
102 (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as parameter and
103 update caller. Use gdbarch_tdep to get at the target specific vector.
105 (i386_register_to_value: Use get_frame_arch to get at the current
108 * i386-tdep.h (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as
111 * i387-tdep.c (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
112 I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM
113 I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_ST0_REGNUM, FSAVE_ADDR,
114 FXSAVE_ADDR, I387_XMM0_REGNUM): Add target specific vector as parameter.
116 (I387_ST0_REGNUM, I387_NUM_XMM_REGS): Remove various define's and
119 (i387_convert_register_p, i387_register_to_value,
120 i387_value_to_register): Update call for i386_fp_regnum_p.
122 * i387-tdep.h: Remove comment.
123 (I387_ST0_REGNUM, I387_NUM_XMM_REGS, I387_MM0_REGNUM): Add define.
124 (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
125 I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM,
126 I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_XMM0_REGNUM,
127 I387_MXCSR_REGNUM): Add target specific vector as parameter.
129 2008-03-10 Daniel Jacobowitz <dan@codesourcery.com>
131 * Makefile.in (fork-child.o): Update.
132 * NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
133 argument. Gather all gdbserver features together.
134 * fork-child.c (exec_wrapper): New variable.
135 (fork_inferior): Use it.
136 (startup_inferior): Skip an extra trap if using "set exec-wrapper".
137 (unset_exec_wrapper_command, _initialize_fork_child): New.
139 2008-03-10 Hidetaka Takano <hidetaka.takano@glb.toshiba.co.jp>
141 * source.c (directory_command): Modify the determination of
142 condition of terminal "from_tty".
144 2008-03-10 Matt Rice <ratmice@gmail.com>
146 * dwarf2read.c (set_cu_language): Add DW_LANG_ObjC.
148 2008-03-10 Hidetaka Takano <hidetaka.takano@glb.toshiba.co.jp>
150 * spu-tdep.c (info_spu_event_command): Insert a '\0' to the end
151 of the data passing to strtoulst function.
152 (info_spu_signal_command): Likewise.
154 2008-03-08 Vladimir Prus <vladimir@codesourcery.com>
156 * mi/mi-interp.c (mi_command_loop): Remove
159 2008-03-07 Joel Brobecker <brobecker@adacore.com>
161 * remote.c (extended_remote_attach_1): Make local variable pid an int
164 2008-03-07 Joel Brobecker <brobecker@adacore.com>
166 * solib-svr4.c (svr4_same_1): New function, originally extracted
167 from svr4_same and expanded to handle the sparc64 case.
168 (svr4_same): Move up and reimplement using svr4_same_1.
169 (enable_break): Use svr4_same_1 to do shared library name comparisons.
171 2008-03-07 Ramana Radhakrishnan <ramana.r@gmail.com>
173 * MAINTAINERS: Move self to Paper trail.
175 2008-03-05 Daniel Jacobowitz <dan@codesourcery.com>
177 * Makefile.in (mingw-hdep.o, posix-hdep.o, remote-fileio.o): Update.
178 * event-loop.c (call_async_signal_handler): New.
179 * event-loop.h (call_async_signal_handler)
180 (gdb_call_async_signal_handler): Declare.
181 (mark_async_signal_handler): Add comments.
182 * event-top.c (handle_sigint): Use gdb_call_async_signal_handler.
183 * mingw-hdep.c (sigint_event, sigint_handler): New.
184 (gdb_select): Use them. Wait for the readline signal handler
186 (gdb_call_async_signal_handler, _initialize_mingw_hdep): New functions.
187 * posix-hdep.c (gdb_call_async_signal_handler): New function.
188 * remote-fileio.c (sigint_fileio_token, async_remote_fileio_interrupt):
190 (remote_fileio_ctrl_c_signal_handler): Use
191 gdb_call_async_signal_handler.
192 (initialize_remote_fileio): Initialize sigint_fileio_token.
193 * remote.c (initialize_sigint_signal_handler, handle_remote_sigint): Do
194 not initialize tokens here.
195 (handle_remote_sigint_twice): Likewise. Reinstall
196 handle_remote_sigint.
197 (async_remote_interrupt_twice): Just call interrupt_query.
198 (cleanup_sigint_signal_handler): Do not delete tokens.
199 (remote_interrupt, remote_interrupt_twice): Use
200 gdb_call_async_signal_handler.
201 (interrupt_query): Reinstall the default signal handler.
202 (_initialize_remote): Initialize tokens here.
204 2008-03-04 Joel Brobecker <brobecker@adacore.com>
206 * features/rs6000/power-core.xml, features/rs6000/power64-core.xml,
207 features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
208 Change the type of the lr register to code_ptr.
209 * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
210 features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
211 features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
212 features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
213 features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
214 features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
215 features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: Regenerate.
217 2008-03-03 James E. Wilson <wilson@tuliptree.org>
219 * MAINTAINERS: Update my email address.
221 2008-03-03 Keith Seitz <keiths@redhat.com>
223 From Dave Murphy <davem@devkitpro.org>:
224 * configure.ac: Set tcl configdir to win under mingw.
225 * configure: Regenerate.
227 2008-03-03 Daniel Jacobowitz <dan@codesourcery.com>
229 * breakpoint.c (fetch_watchpoint_value): New function.
230 (update_watchpoint): Set and clear val_valid. Use
231 fetch_watchpoint_value. Handle unreadable values on the
232 value chain. Correct check for user-requested array watchpoints.
233 (breakpoint_init_inferior): Clear val_valid.
234 (watchpoint_value_print): New function.
235 (print_it_typical): Use it. Do not free or clear old_val. Print
236 watchpoints even if old_val == NULL.
237 (watchpoint_check): Use fetch_watchpoint_value. Check for values
238 becoming readable or unreadable.
239 (watch_command_1): Use fetch_watchpoint_value. Set val_valid.
240 (do_enable_watchpoint): Likewise.
241 * breakpoint.h (struct breakpoint): Update comment for val. Add
243 * NEWS: Mention watchpoints on inaccessible memory.
245 2007-02-29 Daniel Jacobowitz <dan@codesourcery.com>
247 * Makefile.in (i386-nat.o): Update.
248 * amd64-linux-nat.c (_initialize_amd64_linux_nat): Call
249 i386_use_watchpoints.
250 * i386-linux-nat.c (_initialize_i386_linux_nat): Call
251 i386_use_watchpoints.
252 * i386-nat.c (i386_stopped_data_address): Take two arguments.
253 (i386_stopped_by_watchpoint): Update call.
254 (i386_can_use_hw_breakpoint, i386_use_watchpoints): New.
255 * config/i386/nm-i386.h: Conditionalize definitions on
256 ! I386_WATCHPOINTS_IN_TARGET_VECTOR.
257 (i386_use_watchpoints): Declare.
258 (i386_stopped_data_address): Update.
259 * config/i386/nm-linux.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
260 * config/i386/nm-linux64.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
262 2008-02-29 Joel Brobecker <brobecker@adacore.com>
264 GDB 6.8 branch created (branch timestamp: 2008-02-26 10:00 UTC)
265 * version.in: Bump version to 6.8.50.20080229-cvs.
267 2008-02-28 Markus Deuling <deuling@de.ibm.com>
269 * f-typeprint.c (f_print_type): Handle NULL pointer in VARSTRING
272 2008-02-28 Tom Tromey <tromey@redhat.com>
274 * infcmd.c (notice_args_read): Print result of get_inferior_args.
276 2008-02-28 Daniel Jacobowitz <dan@codesourcery.com>
278 * infcmd.c (kill_if_already_running): Make static. Use
279 target_require_runnable.
280 * target.c (target_require_runnable): New.
281 * target.h (target_require_runnable): Declare.
283 2008-02-28 Daniel Jacobowitz <dan@codesourcery.com>
285 * frame.c (reinit_frame_cache): Only annotate if frames were
288 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
290 * regformats/reg-ppc.dat: Rename "ps" to "msr".
291 * regformats/reg-ppc64.dat: Likewise.
293 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
295 * features/Makefile (%.dat): Emit xmltarget statement.
297 * regformats/regdat.sh: Support xmltarget and xmlarch statments.
298 Generate code to set gdbserver_xmltarget in init_registers_${name}.
300 * regformats/arm-with-iwmmxt.dat: Regenerate.
301 * regformats/mips64-linux.dat: Regenerate.
302 * regformats/mips-linux.dat: Regenerate.
303 * regformats/rs6000/powerpc-32.dat: Regenerate.
304 * regformats/rs6000/powerpc-64.dat: Regenerate.
305 * regformats/rs6000/powerpc-e500.dat: Regenerate.
307 * regformats/reg-arm.dat: Add xmlarch statement.
308 * regformats/reg-i386.dat: Likewise.
309 * regformats/reg-i386-linux.dat: Likewise.
310 * regformats/reg-x86-64-linux.dat: Likewise.
311 * regformats/reg-spu.dat: Likewise.
313 2008-02-27 Daniel Jacobowitz <dan@codesourcery.com>
315 * remote.c (remote_wait, remote_async_wait): Stop if we receive
318 2008-02-27 Daniel Jacobowitz <dan@codesourcery.com>
320 * utils.c (debug_timestamp): New.
321 (vfprintf_unfiltered): Print timestamps if requested.
322 (show_debug_timestamp): New.
323 (initialize_utils): Register "set debug timestamp".
324 * NEWS: Mention "set debug timestamp". Add GDB 6.8 section.
326 2008-02-27 Joel Brobecker <brobecker@adacore.com>
328 * breakpoint.c (skip_prologue_sal): New function.
329 (resolve_sal_pc): Adjust SAL past prologue if the SAL was
330 computed from a line number.
332 2008-02-27 Joel Brobecker <brobecker@adacore.com>
334 * features/rs6000/power-core.xml, features/rs6000/power64-core.xml
335 features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
336 Set PC register type to "code_ptr".
337 * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
338 features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
339 features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
340 features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
341 features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
342 features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
343 features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c:
346 2008-02-27 Ulrich Weigand <uweigand@de.ibm.com>
348 * regformats/regdat.sh: Rename init_registers function in
349 generated file to init_registers_${name}.
351 * regformats/reg-crisv32.dat: Set "name" to crisv32.
352 * regformats/reg-ppc64.dat: Set "name" to ppc64.
353 * regformats/reg-s390x.dat: Set "name" to s390x.
355 2008-02-26 Greg Law <glaw@undo-software.com>
357 * regcache.c (registers_changed): Call reinit_frame_cache.
359 2008-02-26 Daniel Jacobowitz <dan@codesourcery.com>
361 * configure.tgt (sh-*-linux*): Match sh*. Add glibc-tdep.o.
362 * sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver
363 and svr4_fetch_objfile_link_map.
364 * Makefile.in (sh-linux-tdep.o): Update.
366 2008-02-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
368 * amd64-tdep.c (amd64_classify): Add support for decimal float
370 * i386-tdep.c (i386_return_value): Make 128-bit decimal float
371 use the struct return convention.
373 2008-02-26 Nick Roberts <nickrob@snap.net.nz>
375 * breakpoint.c (print_one_breakpoint_location): Revert Enb field
376 to old format. Discard breakpoint address if shared library is
378 (breakpoint_1): Adjust formatting of table header accordingly.
380 2008-02-25 Vladimir Prus <vladimir@codesourcery.com>
382 * remote.c (remote_get_threadlist): If the response
383 is empty, don't try to parse it.
385 2008-02-23 Vladimir Prus <vladimir@codesourcery.com>
387 Unbreak 'target async'.
388 * serial.c (serial_async): Set the
389 handler function before enabling async
392 2008-02-22 Daniel Jacobowitz <dan@codesourcery.com>
394 * solib-svr4.c (enable_break): Convert r_brk to a code address.
396 2008-02-21 Pedro Alves <pedro@codesourcery.com>
398 * remote.c (extended_remote_attach_1): Set attach_flag.
399 (extended_remote_create_inferior_1): Clear attach_flag.
401 2008-02-20 Daniel Jacobowitz <dan@codesourcery.com>
403 * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Set
405 (mipsnbsd_lp64_fetch_link_map_offsets): Likewise.
406 * solib-svr4.c (solib_svr4_r_brk): New.
407 (open_symbol_file_object, svr4_current_sos): Always check the
409 (svr4_fetch_objfile_link_map): Do not set debug_base.
410 (enable_break): Use r_brk if it is set.
411 (svr4_ilp32_fetch_link_map_offsets): Set r_brk_offset.
412 (svr4_lp64_fetch_link_map_offsets): Likewise.
413 * solib-svr4.h (struct link_map_offsets): Add r_brk_offset.
415 2008-02-20 Markus Deuling <deuling@de.ibm.com>
416 Mark Kettenis <kettenis@gnu.org>
418 * alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by
419 trad_frame_saved_reg.
420 (trad-frame.h): New include.
422 (alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs
423 instead of frame_obstack_zalloc.
424 (alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register.
426 * Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h.
428 2008-02-20 Markus Deuling <deuling@de.ibm.com>
430 * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess
431 from disassemble_info instead of gdbarch_byte_order.
433 * mips-tdep.c (gdb_print_insn_mips): Likewise.
434 * arm-tdep.c (gdb_print_insn_arm): Likewise.
436 2008-02-20 Markus Deuling <deuling@de.ibm.com>
438 * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add
439 gdbarch as parameter.
441 * gdbarch.{c,h}: Regenerate.
443 * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as
445 * mem-break.c (default_memory_insert_breakpoint)
446 (default_memory_remove_breakpoint): Likewise.
447 * target.h (default_memory_remove_breakpoint)
448 (default_memory_insert_breakpoint): Likewise.
450 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as
451 parameter. Replace current_gdbarch by gdbarch.
452 * m32r-tdep.c (m32r_memory_insert_breakpoint)
453 (m32r_memory_remove_breakpoint): Likewise.
455 2008-02-19 Daniel Jacobowitz <dan@codesourcery.com>
457 * MAINTAINERS: Add Vladimir Prus as MI maintainer.
459 2008-02-19 Joel Brobecker <brobecker@adacore.com>
461 * NEWS: Add entry describing Add support improvements.
463 2008-02-18 Markus Deuling <deuling@de.ibm.com>
465 * m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by
468 2008-02-18 Markus Deuling <deuling@de.ibm.com>
470 * sentinel-frame.c (sentinel_frame_prev_register): Do not call
471 register_offset_hack anymore.
473 * regcache.{c,h} (register_offset_hack): Remove.
475 2008-02-18 Markus Deuling <deuling@de.ibm.com>
477 * hppa-tdep.h (find_global_pointer): Add gdbarch as parameter.
479 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace
480 current_gdbarch by gdbarch.
481 (hppa64_hpux_find_global_pointer): Likewise.
482 * hppa-tdep.c (hppa_find_global_pointer): Likewise.
483 (hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for
486 * hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as
488 * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
490 * hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead
493 * hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and
494 replace current_gdbarch by gdbarch.
495 (hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr.
497 2008-02-18 Markus Deuling <deuling@de.ibm.com>
499 * rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter
500 and replace current_gdbarch by gdbarch.
502 (store_register): Update call for exec_one_dummy_insn.
503 (fetch_register, store_register): Update call of regmap.
505 * ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as
506 parameter and replace current_gdbarch by gdbarch.
508 (ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at
509 the current architecture. Update call for getregs_supplies and
511 (ppcnbsd_fetch_inferior_registers): Likewise.
513 * ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and
514 replace current_gdbarch by gdbarch.
515 (ppcobsd_fetch_registers, ppcobsd_store_registers): Use
516 get_regcache_arch to get at the current architecture. Update call for
519 2008-02-18 Markus Deuling <deuling@de.ibm.com>
521 * arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch
524 2008-02-15 Markus Deuling <deuling@de.ibm.com>
526 * mips-linux-tdep.c (mips_linux_init_abi): Remove internal error.
528 2008-02-14 Vladimir Prus <vladimir@codesourcery.com>
530 * NEWS: Mention pending breakpints in MI.
532 2008-02-14 Markus Deuling <deuling@de.ibm.com>
534 * Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o.
536 2008-02-13 Markus Deuling <deuling@de.ibm.com>
538 Add script to build and test GDB using enable-targets=all.
540 * gdb_buildall.sh: New file.
542 2008-02-11 Maxim Grigoriev <maxim2405@gmail.com>
544 * NEWS (New native configurations): Xtensa GNU/Linux.
545 (New targets): Xtensa GNU/Linux.
546 * Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
548 (ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
549 (xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
550 * configure.tgt (xtensa*-*-linux*): New entry.
551 * xtensa-config.c (xtensa_tdep): New variable.
552 (xtensa_config_byte_order, xtensa_config_tdep): Removed.
553 (rmap): Change format based on new macro XTREG.
554 (XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
555 * xtensa-linux-nat.c: New.
556 * xtensa-linux-tdep.c: New.
557 * xtensa-xtregs.c: New.
558 * xtensa-tdep.h (xtensa_elf_gregset_t): Update.
559 (XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
560 (XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
561 (xtensa_register_t): New field coprocessor.
562 (XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
563 * xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
564 (xtensa_pseudo_register_read, xtensa_pseudo_register_write):
565 Update to handle privileged registers.
566 (xtensa_supply_gregset) Remove exccause and excvaddr registers.
567 (xtensa_push_dummy_call): Set windowstart register correctly.
568 (call0_analyze_prologue): Initialize xtensa_default_isa.
569 (xtensa_derive_tdep): New.
570 (xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
571 xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
572 Call xtensa_derive_tdep().
573 * config/xtensa/linux.mh: New.
574 * regformats/reg-xtensa.dat: New.
576 2008-02-09 Aleksandar Ristovski <aristovski@qnx.com> (tiny change)
578 * corelow.c (core_open): Use IS_ABSOLUTE_PATH.
579 (filenames.h): New include.
580 * Makefile.in (corelow.o): Add dependency for filenames.h.
582 2008-02-08 Doug Evans <dje@google.com>
584 * source.c (find_and_open_source): Always rewrite absolute filenames.
586 2008-02-07 Doug Evans <dje@google.com>
588 * breakpoint.c: #include "hashtab.h".
589 (ambiguous_names_p): New fn.
590 (update_breakpoint_locations): When restoring bp enable status, don't
591 compare function names if any functions have same name.
592 * Makefile.in (breakpoint.o): Add hashtab.h dependency.
594 2008-02-07 Joel Brobecker <brobecker@adacore.com>
596 * ada-lang.c (symbol_completion_add): Make SV parameter a VEC**
597 instead of just a VEC*. Update use of SV.
598 (ada_make_symbol_completion_list): Update symbol_completion_add calls.
600 2007-02-07 Joel Brobecker <brobecker@adacore.com>
602 * NEWS: Put all new commands since gdb-6.7 together.
604 2007-02-07 Joel Brobecker <brobecker@adacore.com>
606 * ada-lang.c: #include "vec.h".
607 (struct string_vector, new_string_vector, string_vector_append):
609 (char_ptr): New typedef.
610 (DEF_VEC_P (char_ptr)): New VEC type.
611 (symbol_completion_add): Update profile to take the new VEC type
612 instead of the old string_vector structure. Update code accordingly.
613 (ada_make_symbol_completion_list): Use the new VEC type instead of
614 the old string_vector structure, and update the code accordingly.
615 * Makefile.in (ada-lang.o): Add dependency on vec.h.
617 2008-02-06 Pierre Muller <muller@ics.u-strasbg.fr>
619 * p-exp.y: Set current_type in missing places.
620 (leftdiv_is_integer): New static variable.
621 Typecast right operand of BINOP_DIV to long_double if both operands
624 2008-02-06 Maciej W. Rozycki <macro@mips.com>
626 * remote-mips.c (set_breakpoint): Rename to...
627 (mips_set_breakpoint): ... this.
628 (clear_breakpoint): Rename to...
629 (mips_clear_breakpoint): ... this.
630 (common_breakpoint): Rename to...
631 (mips_common_breakpoint): ... this.
632 (check_lsi_error): Rename to...
633 (mips_check_lsi_error): ... this.
635 2007-02-05 Joel Brobecker <brobecker@adacore.com>
637 * language.h (struct language_defn): Add new field
638 la_make_symbol_completion_list.
639 * symtab.c (default_make_symbol_completion_list): Renames
640 make_symbol_completion_list.
641 (make_symbol_completion_list): New function.
642 * symtab.h (default_make_symbol_completion_list): Add declaration.
643 * langauge.c (unknown_language): Set la_make_symbol_completion_list.
644 (auto_language, local_language): Likewise.
645 * objc-lang.c (objc_language_defn): Likewise.
646 * scm-lang.c (scm_language_defn): Likewise.
647 * m2-lang.c (m2_language_defn): Likewise.
648 * f-lang.c (f_language_defn): Likewise.
649 * jv-lang.c (java_language_defn): Likewise.
650 * p-lang.c (pascal_language_defn): Likewise.
651 * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn)
652 (minimal_language_defn): Likewise.
653 * ada-lang.c (struct string_vector): New structure.
654 (new_string_vector, string_vector_append, ada_unqualified_name)
655 (add_angle_brackets, symbol_completion_match, symbol_completion_add)
656 (ada_make_symbol_completion_list): New functions.
657 (ada_language_defn): Set la_make_symbol_completion_list.
658 * ada-lang.h (ada_make_symbol_completion_list): Remove declaration,
659 this function is static.
661 2008-02-05 Kevin Buettner <kevinb@redhat.com>
663 * mn10300-tdep.c (mn10300_push_dummy_call): Adjust stack pointer
664 to account for call site optimizations.
666 2008-02-05 Andrzej Zaborowski <balrogg@gmail.com>
668 * tracepoint.c (read_actions): Handle end-of-text indicator
669 in action list properly. (Committed by Jim Blandy)
671 2008-02-05 Jim Blandy <jimb@red-bean.com>
673 * ax-gdb.c (gen_expr): Yield ordinary error if asked to trace a
674 pseudoregister, not an internal error.
675 Reported by: Andrzej Zaborowski
677 2008-02-04 Vladimir Prus <vladimir@codesourcery.com>
679 * varobj.c (c_value_of_variable): Use xstrdup.
681 2008-02-04 Vladimir Prus <vladimir@codesourcery.com>
683 Update stored rendition of varobj value when format changes.
684 * varobj.c (varobj_set_display_format): Recomputed
686 (c_value_of_variable): Return print_value.
688 2008-02-03 Doug Evans <dje@google.com>
690 * eval.c (evaluate_subexp_standard): Fix type of result of mixed
691 integer/float division operations when EVAL_AVOID_SIDE_EFFECTS.
692 * valops.c (value_one): New function.
693 * value.h (value_one): Declare.
695 Fix argument promotion for binary arithmetic ops for C.
696 * valarith.c (unop_result_type): New fn.
697 (binop_result_type): New fn.
698 (value_binop): Move result type computation to binop_result_type.
699 (value_pos, value_neg, value_complement): Move result type
700 computation to unop_result_type.
703 * gdbtypes.c (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
704 Return basetype, fieldno if found. All callers updated.
705 Don't cache TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE if from different
707 * gdbtypes.h (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
708 * symfile.h (fill_in_vptr_fieldno): Delete.
710 2008-02-02 Doug Evans <dje@google.com>
712 * valarith.c (value_binop): Handle unsigned BINOP_REM division by zero.
714 * typeprint.c (*): Whitespace cleanup.
716 2008-02-02 Mark Kettenis <kettenis@gnu.org>
717 Luis Machado <luisgpm@br.ibm.com>
718 Thiago Jung Bauermann <bauerman@br.ibm.com>
720 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that
721 don't fit into registerson the stack the way GCC does.
723 2008-02-01 Joel Brobecker <brobecker@adacore.com>
725 * symtab.c (symbol_set_names): Do not add an entry in the demangling
726 hash table for Ada symbols. Just store the linkage name as is,
727 and leave the demangled_name as NULL.
729 2007-02-01 Joel Brobecker <brobecker@adacore.com>
731 * dwarf2read.c (add_partial_symbol): Always store all Ada subprograms
733 (new_symbol): Likewise.
735 2008-02-01 Vladimir Prus <vladimir@codesourcery.com>
737 * breakpoint.c (break_command_1): Return void.
738 (break_command_really): Return void. Rethrow
739 exceptions instead of returning.
740 (gdb_breakpoint): Remove the error_message parameter.
741 Return void. Rename to set_breakpoint.
742 * gdb.h (gdb_breakpoint): Rename and move to...
743 * breakpoint.h (set_breakpoint): ...here.
744 * mi/mi-cmb-break.c (mi_cmd_break_insert): Restore
745 event hooks even if exception is thrown. Adjust to
746 gdb_breakpoint interface changes.
749 2008-02-01 Thiago Jung Bauermann <bauerman@br.ibm.com>
751 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Write 32-bit
752 float in both first and second word in the doubleword, to support
755 2008-02-01 Vladimir Prus <vladimir@codesourcery.com>
757 Properly rethrow exception. This fixes errors
758 about non-existent functions for -break-insert.
759 * breakpoint.c (break_command_really): Use throw_exception
760 for rethrowing. If rethrowing, don't print the exception.
762 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
764 * NEWS: Mention Decimal Floating Point support.
766 2008-01-31 Joel Brobecker <brobecker@adacore.com>
768 * std-regs.c (value_of_builtin_frame_pc_reg): Change the returned
769 value type to builtin_type_void_func_ptr.
771 2008-01-31 Andreas Krebbel <krebbel1@de.ibm.com>
773 * s390-tdep.c (is_float_singleton, is_float_like,
774 alignment_of, s390_return_value): Make checks for
775 TYPE_CODE_FLT to match TYPE_CODE_DECFLOAT as well.
777 2008-01-31 Luis Machado <luisgpm@br.ibm.com>
778 Thiago Jung Bauermann <bauerman@br.ibm.com>
780 * infcmd.c (default_print_registers_info): Also print hex
781 raw contents for TYPE_CODE_DECFLOAT registers.
782 * ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member.
783 * rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro.
784 (rs6000_register_name): Add support for DFP pseudo-registers.
785 (rs6000_pseudo_register_type): Likewise.
786 rs6000_pseudo_register_reggroup_p): Likewise.
787 (ppc_pseudo_register_read): New function.
788 (ppc_pseudo_register_write): Likewise.
789 (rs6000_pseudo_register_read): Likewise.
790 (rs6000_pseudo_register_write): Likewise.
791 (e500_pseudo_register_read): Move checks to
792 rs6000_pseudo_register_read.
793 (e500_pseudo_register_write): Move checks to
794 rs6000_pseudo_register_write.
795 (rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum. Install
796 rs6000_pseudo_register_read and rs6000_pseudo_register_write
797 in gdbarch if SPE or DFP is available. Adjust gdbarch's
798 num_pseudo_regs to account for DFP pseudo regs.
800 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
802 * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_ev31_regnum member.
803 * rs6000-tdep.c (IS_SPE_PSEUDOREG): New macro.
804 (spe_register_p, rs6000_register_name, rs6000_pseudo_register_type,
805 rs6000_pseudo_register_reggroup_p, e500_move_ev_register,
806 e500_pseudo_register_read, e500_pseudo_register_write): Use
807 IS_SPE_PSEUDOREG macro.
808 (rs6000_frame_cache): Remove use of tdep->ppc_ev31_regnum.
809 (rs6000_gdbarch_init): Remove unnecessary num_sprs local variable.
810 Remove initialization of tdep->ppc_ev31_regnum.
812 2008-01-08 Paul Hilfinger <hilfinger@adacore.com>
814 * printcmd.c (print_formatted): Handle references as for unformatted
817 2008-01-30 Joel Brobecker <brobecker@adacore.com>
819 * eval.c (evaluate_subexp_standard): Add handling of user
820 registers when in EVAL_AVOID_SIDE_EFFECTS mode.
822 2008-01-30 Pierre Muller <muller@ics.u-strasbg.fr>
824 * eval.c (evaluate_subexp_standard): Support
827 2008-01-30 Paul N. Hilfinger <hilfinger@adacore.com>
829 * valarith.c (value_binop): Add floating-point BINOP_MIN and
831 For BINOP_EXP, use length and signedness of left operand only for
832 result, as for shifts.
833 For integral operands to BINOP_EXP, use new integer_pow and
834 uinteger_pow functions so as to get full range of results.
835 (integer_pow): New function.
836 (uinteger_pow): New function.
838 2008-01-30 Vladimir Prus <vladimir@codesourcery.com>
840 Use vector for varobj_list_children interface.
841 * gdb/varobj.c (varobj_list_children): Return vector
843 * gdb/varobj.h (varobj_list_children): Adjust
845 (varobj_p): Declare. Declare vector thereof.
846 * mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust
847 for varobj_list_children change.
848 * Makefile.in (varobj_h): Update dependencies.
850 2008-01-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
852 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Add support for
853 TYPE_CODE_DECFLOAT arguments.
854 (ppc64_sysv_abi_push_dummy_call) Likewise.
855 (get_decimal_float_return_value): New function.
856 (do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return
857 values by calling get_decimal_float_return_value.
858 (ppc64_sysv_abi_return_value): Likewise.
860 2008-01-30 Nick Roberts <nickrob@snap.net.nz>
862 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Add field
863 for preprocessor macro information. Formatting changes.
865 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com>
867 * remote.c (struct remote_state): Add cached_wait_status.
868 (remote_exec_file): New variable.
869 (PACKET_vAttach, PACKET_vRun): New constants.
870 (extended_remote_restart): Do not query for status.
871 (struct start_remote_args): New.
872 (remote_start_remote): Take it as a second argument. Check
873 whether the target is running. Issue an error for non-running
874 non-extended targets. Cache the wait status. Set inferior_ptid
876 (remote_open_1): Prompt to disconnect non-running targets. Make
877 sure the target is marked running. Do not set inferior_ptid here.
878 Update call to remote_start_remote. Do not call remote_check_symbols
879 if the target is not running.
880 (remote_detach_1): Rename from remote_detach. Take an EXTENDED
881 argument. Handle a non-running target.
882 (remote_detach): Use it.
883 (extended_remote_detach): New.
884 (remote_disconnect): Fix typo. Use remoute_mourn_1.
885 (extended_remote_attach_1, extended_remote_attach)
886 (extended_async_remote_attach): New.
887 (remote_vcont_resume): Remove unused variable.
888 (remote_wait, remote_async_wait): Use any cached wait status.
889 (putpkt_binary, getpkt): Clear any cached wait status.
890 (extended_remoute_mourn_1): New.
891 (extended_remote_mourn): Use it.
892 (extended_async_remote_mourn, extended_remote_run): New.
893 (extended_remote_create_inferior_1): New.
894 (extended_remote_create_inferior): Use it.
895 (extended_remote_async_create_inferior): Likewise.
896 (remote_xfer_partial): Skip for non-executing targets.
897 (init_extended_remote_ops): Set to_detach and to_attach.
898 (init_extended_async_remote_ops): Likewise. Use
899 extended_async_remote_mourn.
900 (_initialize_remote): Register vAttach, vRun, and
901 set remote exec-file.
902 * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
904 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com>
906 * Makefile.in (symfile.o): Update.
907 * NEWS: Mention exec tracing support.
908 * inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
910 * infcmd.c (kill_if_already_running, detach_command)
911 (disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
912 * infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
913 (follow_exec): Do not check may_follow_exec. Do not mourn and push
914 targets. Apply the sysroot path to the loaded executable. Use
916 * linux-nat.c (linux_child_follow_fork): Print fork following
918 (kill_wait_callback): Kill again before waiting a second time.
919 * symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
922 2008-01-29 Joel Brobecker <brobecker@adacore.com>
924 * amd64-tdep.c (amd64_classify): Add handling of TYPE_CODE_CHAR.
926 2008-01-29 Joel Brobecker <brobecker@adacore.com>
928 * nto-tdep.h: Remove #include "defs.h".
929 * nto-tdep.c: Add #include "defs.h".
930 * Makefile.in (nto_tdep_h): Update dependencies.
931 (nto-tdep.o): Likewise.
933 2008-01-29 Joel Brobecker <brobecker@adacore.com>
935 * infrun.c (wait_for_inferior): Add treat_exec_as_sigtrap parameter
937 (proceed, start_remote): Update call to wait_for_inferior.
938 * inferior.h (wait_for_inferior): Update declaration.
939 * fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c,
940 solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior.
941 * inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as
942 TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED.
944 2008-01-29 Aleksandar Ristovski <aristovski@qnx.com>
946 * varobj (adjust_value_for_child_access): Added checking for
947 returned value from gdb_value_ind.
948 (c_describe_child): Likewise.
949 (cplus_describe_child): Fixed a typo.
951 2008-01-29 Jim Blandy <jimb@red-bean.com>
953 * MAINTAINERS: Update my info.
955 2008-01-29 Vladimir Prus <vladimir@codesourcery.com>
957 Use multiple locations for hardware watchpoints.
958 This eliminates the need to traverse value chain, doing
959 various checks, in three different places.
961 * breakpoint.h (struct bp_location): New fields
962 lengths and watchpoint_type.
963 (struct breakpoint): Remove the val_chain field.
964 * breakpoint.c (is_hardware_watchpoint): New.
965 (free_valchain): Remove.
966 (update_watchpoint): New.
967 (insert_bp_location): For hardware watchpoint, just
969 (insert_breakpoints): Call update_watchpoint_locations
970 on all watchpoints. If we have failed to insert
971 any location of a hardware watchpoint, remove all inserted
973 (remove_breakpoint): For hardware watchpoints, directly
975 (watchpoints_triggered): Iterate over locations.
976 (bpstat_stop_status): Use only first location of
977 a resource watchpoint.
978 (delete_breakpoint): Don't call free_valchain.
979 (print_one_breakpoint): Don't print all
980 locations for watchpoints.
981 (breakpoint_re_set_one): Use update_watchpoint for
984 2008-01-29 Vladimir Prus <vladimir@codesourcery.com>
986 Don't reset watchpoint block on solib load.
988 * breakpoint.c (insert_bp_location): For watchpoints,
990 (breakpoint_re_set_one): Instead of recomputing value
991 and condition for watchpoints, just reset value and
992 let insert_breakpoints/insert_bp_location recompute it.
993 Don't do anything about disabled watchpoint.
995 2008-01-29 Pierre Muller <muller@ics.u-strasbg.fr>
997 * valarith.c (value_binop): Handle unsigned integer
1000 2008-01-28 Kevin Buettner <kevinb@redhat.com>
1002 * mn10300-tdep.c (mn10300_analyze_prologue): Check for an
1003 instruction pattern that appears frequently in position
1004 independent code. Fix bug in code which looks for "fmov" and
1005 backtracks if no "fmov" is found.
1007 2008-01-28 Doug Evans <dje@google.com>
1009 * dbxread.c (read_dbx_symtab): Fix indentation.
1010 Reformat comments to 80 columns.
1011 Move local var def closer to only use.
1013 2008-01-28 Daniel Jacobowitz <dan@codesourcery.com>
1015 * fork-child.c (SHELL_FILE): Remove #ifndef.
1016 (fork_inferior): Remove SHELL_COMMAND_CONCAT.
1018 2008-01-25 Pierre Muller <muller@ics.u-strasbg.fr>
1020 * i386-tdep.c (i386_skip_noop): New function.
1021 (i386_analyze_prologue): Call i386_skip_noop function.
1023 2008-01-24 Michael Snyder <msnyder@specifix.com>
1025 * procfs.c (procfs_xfer_partial): Comment, cut/paste error.
1026 * win32-nat.c (win32_xfer_partial): Ditto.
1027 * target.c (default_xfer_partial): Minor whitespace adjustment.
1029 2008-01-24 Pedro Alves <pedro@codesourcery.com>
1031 * arm-tdep.c (arm_addr_bits_remove): In non 26-bit mode, don't
1032 strip bit 1 even if pc doesn't point to thumb code.
1034 2008-01-23 Daniel Jacobowitz <dan@codesourcery.com>
1036 * remote.c (remote_wait): Handle SIGINT between packets.
1037 (remote_async_wait): Likewise.
1039 2008-01-23 Vladimir Prus <vladimir@codesourcery.com>
1040 Chris Demetriou <cgd@google.com>
1042 * thread.c (add_thread_silent): Renamed
1044 (print_thread_events): New variable definition.
1045 (show_print_thread_events): New function.
1046 (_initialize_thread): Add "set print thread-events" and
1047 "show print thread-events" commands.
1048 (add_thread): Announce new thread.
1049 * gdbthread.h (add_thread_silent): Declare.
1050 (print_thread_events): New variable declaration.
1051 * inf-ttrace.c (inf_ttrace_wait): Don't
1052 inform about new thread, as add_thread is always
1053 called too, and will take care of that.
1054 * infrun.c (handle_inferior_event): Likewise.
1055 * procfs.c (procfs_wait): Likewise.
1056 * remote.c (remote_currthread): Likewise.
1057 * sol-thread.c (sol_thread_wait): Likewise.
1058 * win32-nat.c (get_win32_debug_event): Likewise.
1059 * linux-thread-db.c (attach_thread): Likewise.
1060 Remove the verbose parameter.
1061 (check_event): Make detach_thread be verbose
1062 only if print_thread_events is set.
1063 * linux-nat.c (lin_lwp_attach_lwp): Don't inform
1064 about new thread. This is called only from
1065 linux-thread-db.c:attach_thread, which will take care.
1066 Remove the verbose parameter.
1067 * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
1069 2008-01-23 Nick Roberts <nickrob@snap.net.nz>
1071 * mi/mi-cmd-var.c (mi_cmd_var_set_format): Add value field to output.
1073 2008-01-22 Vladimir Prus <vladimir@codesourcery.com>
1075 * breakpoint.c (break_command_really): New parameter
1077 (break_command_1): Pass 0 as
1078 ignore_count to break_command_really.
1079 (gdb_breakpoint): Pass ignore_count to
1080 break_command_really.
1082 2008-01-21 Kevin Buettner <kevinb@redhat.com>
1084 * mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find
1085 sigcontext struct via pointer.
1086 (struct sigframe comment): Update to show new field `psc'.
1088 2008-01-21 Vladimir Prus <vladimir@codesourcery.com>
1090 * infrun.c (handle_inferior_event): If
1091 we failed to remove breakpoints, error,
1092 don't try to increment PC by hand.
1094 2008-01-18 Nick Hudson <nick.hudson@dsl.pipex.com>
1096 Add NetBSD/hppa target and host support.
1098 * hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
1099 (hppabsd_gregset): Move to ...
1100 (hppabsd_regset_from_core_section): Rename
1101 hppaobsd_regset_from_core_section and move to ...
1102 (hppabsd_find_global_pointer): Update comment.
1103 (hppabsd_init_abi): Make global. Do not register
1104 hppabsd_regset_from_core_section.
1105 (hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
1107 (_initialize_hppabsd_tdep): Move to ...
1108 * hppaobsd-tdep.c: ... here. New file.
1109 * hppnbsd-tdep.c: New file.
1110 * hppnbsd-nat.c: New file.
1111 * Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
1112 (ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
1113 (hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
1114 (hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
1115 * configure.host (hppa*-*-netbsd*): New entry.
1116 * configure.tgt (hppa*-*-netbsd*): New entry.
1117 (hppa*-*-openbsd*): Update.
1118 * NEWS (New native configuration): Mention NetBSD/hppa.
1119 (New targets): Mention NetBSD/hppa.
1121 2008-01-18 Markus Deuling <deuling@de.ibm.com>
1123 * gdbarch.sh (function_list): Add new property bits_big_endian to
1125 * gdbarch.{c,h}: Regenerate.
1127 * value.c (struct value): Replace BITS_BIG_ENDIAN by
1128 gdbarch_bits_big_endian (comment).
1129 (unpack_field_as_long, modify_field): Likewise.
1130 * value.h: Likewise (comment).
1131 * valops.c (value_slice): Likewise.
1132 * valarith.c (value_subscript, value_bit_index): Likewise.
1133 * gdbtypes.h (field): Likewise (comment).
1134 * eval.c (evaluate_subexp_standard): Likewise.
1135 * dwarf2read.c (dwarf2_add_field): Likewise.
1136 * ada-lang.c (decode_packed_array, ada_value_primitive_packed_val)
1137 (move_bits, ada_value_assign, value_assign_to_component): Likewise.
1139 * defs.h (BITS_BIG_ENDIAN): Remove.
1141 2008-01-18 Markus Deuling <deuling@de.ibm.com>
1143 * jv-exp.y (yylex): Replace DEPRECATED_STREQN with the appropriate
1145 * m2-exp.y (yylex): Likewise.
1146 * objc-exp.y (yylex): Likewise.
1148 * defs.h (DEPRECATED_STREQN): Remove.
1150 2008-01-17 H.J. Lu <hjl.tools@gmail.com>
1152 * MAINTAINERS: Update my email address.
1154 2008-01-17 Jim Blandy <jimb@codesourcery.com>
1156 * README: Mention gdbserver/README.
1158 2008-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
1160 * valarith.c (value_binop): Handle BINOP_INTDIV
1161 for unsigned and signed integers.
1163 2008-01-17 Ulrich Weigand <uweigand@de.ibm.com>
1165 * s390-tdep.c (s390_gdbarch_init): Set default long double
1166 type to 128-bit IEEE quad.
1168 2008-01-17 Joel Brobecker <brobecker@adacore.com>
1170 * hpux-thread.c (hpux_thread_resume): Delete commented-out code.
1172 2008-01-16 Mark Kettenis <kettenis@gnu.org>
1174 * auxv.c (fprint_target_auxv): Add support for AT_SUN_AUXFLAGS.
1176 * dfp.c, dfp.h: Rename decimal_to_double to decimal_to_doublest.
1177 * value.c: All callers changed.
1179 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1181 * rs6000-nat.c (add_vmap, vmap_ldinfo, vmap_exec): Replace
1182 DEPRECATED_STREQ by its expression.
1183 * coffread.c (coff_locate_sections, coff_symtab_read): Likewise.
1184 * xcoffread.c (read_xcoff_symtab, read_symbol_lineno, find_linenos)
1185 (scan_xcoff_symtab): Likewise.
1186 * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Likewise.
1187 * f-lang.c (find_common_for_function): Likewise.
1188 * objc-exp.y (parse_number): Likewise.
1190 * defs.h (DEPRECATED_STREQ): Remove.
1192 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1194 * mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter.
1195 * mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use
1196 get_frame_arch to get at the current_architecture. Update AM33_MODE
1198 (mn10300_analyze_prologue): Add gdbarch as parameter. Update caller.
1199 (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
1201 (set_reg_offsets, mn10300_analyze_prologue): Fix indentation.
1203 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1205 * amd64-nat.h (amd64_native_gregset_supplies_p): Add gdbarch as
1207 * amd64-nat.c (amd64_native_gregset_supplies_p): Likewise.
1209 (amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace
1210 current_gdbarch by gdbarch. Update caller.
1212 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers)
1213 (amd64_linux_store_inferior_registers): Use get_regcache_arch to get at
1214 the current architecture. Update calls of
1215 amd64_native_gregset_supplies_p.
1216 * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers)
1217 (amd64bsd_store_inferior_registers): Likewise.
1219 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1221 * ppc-linux-nat.c (ppc_register_u_addr): Add gdbarch as parameter.
1222 Replace current_gdbarch by gdbarch. Update caller.
1224 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1226 * dbxread.c (repeated_header_complaint, dbx_symfile_init)
1227 (read_dbx_dynamic_symtab, function_outside_compilation_unit_complaint)
1228 (read_dbx_symtab, end_psymtab, dbx_psymtab_to_symtab_1)
1229 (dbx_psymtab_to_symtab, read_ofile_symtab, process_one_symbol)
1230 (stabsect_build_psymtabs): Fix indentation.
1232 2008-01-15 Michael Snyder <msnyder@specifix.com>
1234 * corelow.c (core_xfer_partial): Comment, cut/paste error.
1236 2008-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
1238 * win32-nat.c (win32_create_inferior): Restore code calling
1239 CloseHandle on ProcessInformation structure.
1241 2008-01-13 Nick Hudson <nick.hudson@dsl.pipex.com>
1243 * configure.ac: Check for void * as 3 argument of ptrace.
1244 * configure: regenerate.
1246 2008-01-11 Markus Deuling <deuling@de.ibm.com>
1248 * alpha-tdep.c (alpha_heuristic_proc_start)
1249 (alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
1250 current_gdbarch by gdbarch.
1252 (alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
1253 current architecture by frame_info. Update alpha_heuristic_proc_start
1256 (alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
1257 get_frame_arch to get at the current architecture by frame_info. Update
1258 alpha_sigtramp_register_address call.
1260 * arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
1261 current_gdbarch by gdbarch. Update caller.
1262 (convert_to_extended, convert_from_extended): Add endianess parameter
1263 for comparison. Update caller.
1264 (arm_extract_return_value, arm_store_return_value): Use
1265 get_regcache_arch to get at the current architecture.
1267 * cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
1268 current_gdbarch by gdbarch. Update caller.
1269 (cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
1270 gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.
1272 * h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
1273 gdbarch as parameter. Update caller.
1274 (h8300_init_frame_cache): Add gdbarch as parameter. Replace
1275 current_gdbarch by gdbarch. Update caller.
1277 * hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and
1278 update caller. Replace current_gdbarch by gdbarch.
1280 * m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
1281 the current architecture. Replace current_gdbarch by gdbarch.
1282 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
1283 (STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
1284 expression. Add gdbarch as parameter and replace current_gdbarch with
1286 (M6811_TDEP): Remove.
1287 (m68hc11_frame_prev_register): Use get_frame_arch to get at the current
1289 (m68hc11_scan_prologue): Add gdbarch as parameter. Replace
1290 current_gdbarch by gdbarch. Update caller.
1292 * m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
1294 (m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
1297 * rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
1298 caller. Relace current_gdbarch by gdbarch.
1299 (altivec_register_p, spe_register_p): Likewise.
1300 * ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
1302 * ppc-linux-nat.c (fetch_register, store_register): Update caller of
1303 altivec_register_p and spe_register_p.
1305 * score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update
1306 caller. Replace current_gdbarch by gdbarch.
1307 (score_analyze_prologue): use get_frame_arch to get at the current
1310 * sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
1311 * sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
1312 current_gdbarch by gdbarch. Update caller.
1313 (sparc_frame_cache): Use get_frame_arch to get at the current
1315 * sparce64-tdep.c (sparc64_skip_prologue): Update call of
1316 sparc_analyze_prologue.
1318 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
1321 2008-01-11 Markus Deuling <deuling@de.ibm.com>
1323 * exec.c: #include "arch-utils.h"
1324 (print_section_info): Use gdbarch_from_bfd to get at the
1325 current architecture. Replace current_gdbarch. Fix indention. Replace
1326 deprecated_print_address_numeric by paddress.
1327 * Makefile.in (exec.o) Add dependency to arch-utils.h.
1329 * valprint.c (val_print_string): Replace
1330 deprecated_print_address_numeric.
1331 * tracepoint.c (trace_mention, scope_info): Likewise.
1332 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
1333 (print_symbol, print_partial_symbols, maintenance_info_psymtabs)
1334 (maintenance_check_symtabs): Likewise.
1335 * symfile.c (list_overlays_command): Likewise.
1336 * stack.c (frame_info, print_block_frame_labels): Likewise.
1337 * printcmd.c (print_address, print_address_demangle)
1338 (address_info): Likewise.
1339 * corefile.c (memory_error): Likewise.
1340 * infcmd.c (jump_command): Likewise.
1341 * breakpoint.c (insert_bp_location, describe_other_breakpoints)
1342 (mention, delete_breakpoint): Likewise.
1343 * c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
1344 * dwarf2read.c (dump_die): Likewise.
1345 * ada-valprint.c (ada_val_print_1): Likewise.
1346 * f-valprint.c (f_val_print): Likewise.
1347 * linux-fork.c (info_forks_command): Likewise.
1348 * m32r-com.c (m32r_load_section, m32r_load)
1349 (m32r_upload_command): Likewise.
1351 * ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.
1353 2008-01-11 Markus Deuling <deuling@de.ibm.com>
1355 * gdbarch.sh (skip_prologue): Add gdbarch
1357 * gdbarch.{c,h}: Regenerate.
1359 * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter.
1360 * amd64-tdep.c (amd64_skip_prologue): Likewise.
1361 * avr-tdep.c (avr_skip_prologue): Likewise.
1362 * cris-tdep.c (cris_skip_prologue): Likewise.
1363 * frv-tdep.c (frv_skip_prologue): Likewise.
1364 * h8300-tdep.c (h8300_skip_prologue): Likewise.
1365 * hppa-tdep.c (hppa_skip_prologue): Likewise.
1366 * i386-tdep.c (i386_skip_prologue): Likewise.
1367 * ia64-tdep.c (ia64_skip_prologue): Likewise.
1368 * iq2000-tdep.c (iq2000_skip_prologue): Likewise.
1369 * m32r-tdep.c (m32r_skip_prologue): Likewise.
1370 * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise.
1371 * m68k-tdep.c (m68k_skip_prologue): Likewise.
1372 * m88k-tdep.c (m88k_skip_prologue): Likewise.
1373 * mep-tdep.c (mep_skip_prologue): Likewise.
1374 * mips-tdep.c (mips_skip_prologue): Likewise.
1375 * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
1376 * mt-tdep.c (mt_skip_prologue): Likewise.
1377 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
1378 * score-tdep.c (score_skip_prologue): Likewise.
1379 * sh64-tdep.c (sh64_skip_prologue): Likewise.
1380 * sh-tdep.c (sh_skip_prologue): Likewise.
1381 * sparc64-tdep.c (sparc64_skip_prologue): Likewise.
1382 * sparc-tdep.c (sparc32_skip_prologue): Likewise.
1383 * spu-tdep.c (spu_skip_prologue): Likewise.
1384 * v850-tdep.c (v850_skip_prologue): Likewise.
1385 * vax-tdep.c (vax_skip_prologue): Likewise.
1386 * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
1387 * xtensa-tdep.c (xtensa_skip_prologue): Likewise.
1389 * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace
1390 current_gdbarch by gdbarch.
1391 * m32c-tdep.c (m32c_skip_prologue): Likewise.
1392 * s390-tdep.c (s390_skip_prologue): Likewise.
1394 2008-01-10 Doug Evans <dje@google.com>
1396 * defs.h (struct continuation_arg): Fix typo in comment.
1397 * target.c (target_translate_tls_address): Fix comment spelling error.
1399 2008-01-09 Thiago Jung Bauermann <bauerman@br.ibm.com>
1401 * doublest.h (DOUBLEST_PRINT_FORMAT): Remove % from string.
1402 (DOUBLEST_SCAN_FORMAT): Likewise.
1403 * dfp.c (decimal_from_floating): Use DOUBLEST_PRINT_FORMAT.
1404 * ada-lex.l (processReal): Prepend "%" to use of DOUBLEST_SCAN_FORMAT.
1405 * c-exp.y (parse_number): Likewise.
1406 * jv-exp.y (parse_number): Likewise.
1407 * objc-exp.y (parse_number): Likewise.
1408 * p-exp.y (parse_number): Likewise.
1410 2008-01-09 Joel Brobecker <brobecker@adacore.com>
1412 * gdbtypes.c (create_array_type): Add handling of null Ada arrays.
1413 (check_typedef): Likewise.
1415 2008-01-09 Luis Machado <luisgpm@br.ibm.com>
1417 * printcmd.c (printf_command): Add seen_big_h, seen_big_d and
1418 seen_double_big_d, treat the new H, D, and DD modifiers as length
1421 2008-01-08 Joel Brobecker <brobecker@adacore.com>
1423 * dwarf2read.c (read_enumeration_type): Add comment.
1425 2008-01-08 Thiago Jung Bauermann <bauerman@br.ibm.com>
1427 * config.in: Regenerate.
1429 2008-01-08 Joel Brobecker <brobecker@adacore.com>
1431 * ada-lang.c (ada_convert_actual): Renames convert_actual.
1433 (ada_convert_actuals): Delete.
1434 * ada-lang.h (ada_convert_actual): Add declaration.
1435 (ada_convert_actuals): Remove declaration.
1436 * infcall.c: #include "ada-lang.h".
1437 (value_arg_coerce): Add new parameter sp. Update function
1438 documetnation. Add handling of Ada function call parameters.
1439 * Makefile.in (infcall.o): Update dependencies.
1441 2008-01-08 Paul Hilfinger <hilfinger@adacore.com>
1443 * ada-lang.c (ensure_lval): Fix value lval kind.
1444 (convert_actual): Add handling for arguments passed by reference.
1446 2008-01-08 Doug Evans <dje@google.com>
1448 * dbxread.c (read_dbx_symtab): Fix indentation.
1450 2008-01-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
1452 * Makefile.in (dfp.o): Depend on expression.h, gdbtypes.h and value.h.
1453 (valarith.o): Depend on dfp.h.
1454 (valops.o): Likewise.
1455 * dfp.c: Include expression.h, gdbtypes.h, value.h and dfp.h.
1456 (set_decnumber_context): New function.
1457 (decimal_check_errors): Likewise.
1458 (decimal_from_number): Likewise.
1459 (decimal_to_number): Likewise.
1460 (decimal_from_string): Use set_decnumber_context and
1461 decimal_check_errors.
1462 (decimal_from_integral): New function.
1463 (decimal_from_floating): Likewise.
1464 (decimal_to_double): Likewise.
1465 (promote_decimal): Likewise.
1466 (decimal_binop): Likewise.
1467 (decimal_is_zero): Likewise.
1468 (decimal_compare): Likewise.
1469 (decimal_convert): Likewise.
1470 * dfp.h (decimal_from_integral): New prototype.
1471 (decimal_from_floating): Likewise.
1472 (decimal_to_double): Likewise.
1473 (decimal_binop): Likewise.
1474 (decimal_is_zero): Likewise.
1475 (decimal_compare): Likewise.
1476 (decimal_convert): Likewise.
1477 * eval.c (evaluate_subexp_standard): Remove expect_type argument from
1478 call to value_from_decfloat.
1479 * valarith.c: Include dfp.h.
1480 (value_args_as_decimal): New function.
1481 (value_binop): Add if block to handle TYPE_CODE_DECFLOAT values.
1482 (value_logical_not): Likewise.
1483 (value_equal): Likewise.
1484 (value_less): Likewise.
1485 (value_pos): Likewise.
1486 (value_neg): Formatting fix.
1487 * valops.c: Include dfp.h.
1488 (value_cast): Add if block to handle TYPE_CODE_DECFLOAT values.
1489 * value.c (unpack_long): Add case to handle TYPE_CODE_DECFLOAT.
1490 (unpack_double): Add if block to handle TYPE_CODE_DECFLOAT.
1491 (value_from_decfloat): Remove expect_type argument.
1492 * value.h (value_from_decfloat): Update prototype.
1494 2008-01-07 Vladimir Prus <vladimir@codesourcery.com>
1496 Ignore change in name of dynamic linker during
1497 execution on Solaris. This also unbreaks pending breakpoints.
1499 * solist.h (struct target_so_ops): New field same.
1500 * solib-svr4.c (svr4_same): New.
1501 (_initialize_svr4_solib): Register svr4_same.
1502 * solib.c (update_solib_list): Use ops->same, if available.
1504 2008-01-06 Christopher Faylor <me+cygwin@cgf.cx>
1506 * win32-nat.c (win32_make_so): Use cygwin-style path to avoid warnings
1507 when using MS-DOS paths.
1509 2008-01-05 Pedro Alves <pedro@codesourcery.com>
1511 * NEWS: Mention --pid and --core command line behaviour changes.
1513 2008-01-05 Pedro Alves <pedro@codesourcery.com>
1515 * main.c (captured_main): Remove 'count' varible and the
1516 ALIGN_STACK_ON_ENTRY block that used it. Error out if --core and
1517 --pid options were issued simultaneously. If an explicit pid
1518 option was passed, don't fallback to core file. Detect extra
1519 arguments better in the presence of explicit pid or core
1522 2008-01-05 Joel Brobecker <brobecker@adacore.com>
1524 * ada-lang.c (ada_which_variant_applies): Correctly compute
1525 the value of the discriminant when the variant record is packed.
1527 2008-01-04 Joel Brobecker <brobecker@adacore.com>
1529 * ada-lang.c (is_name_suffix): Handle middle-name numeric suffixes
1530 that are used to differentiate homonyms.
1532 2008-01-04 Jerome Guitton <guitton@adacore.com>
1534 * ada-lang.c (decode_packed_array_type): Avoid a seg fault
1535 when the type is an anonymous pointer type.
1536 (ada_check_typedef): Avoid a seg fault when the type is null.
1537 * ada-typeprint.c (print_array_type): Add support for pointer
1540 2008-01-04 Paul N. Hilfinger <hilfinger@adacore.com>
1542 * ada-exp.y: Allow '{type} ADDRESS' notation on left of assignment.
1544 2008-01-04 Joel Brobecker <brobecker@adacore.com>
1546 * ada-lang.c (ada_evaluate_subexp): Evaluate tagged types in
1547 EVAL_NORMAL mode when noside is EVAL_AVOID_SIDE_EFFECTS.
1549 2008-01-04 Joel Brobecker <brobecker@adacore.com>
1551 * ada-exp.y (chop_separator): New function.
1552 (write_selectors): Rewrite to re-use chop_separator.
1553 (ada_nget_field_index, get_symbol_field_type): New functions.
1554 (write_var_or_type): Add support for "ptype TYPENAME.FIELD"
1557 2008-01-03 Thiago Jung Bauermann <bauerman@br.ibm.com>
1559 * symtab.c (find_pc_sect_line): Use SYMBOL_VALUE_ADDRESS instead
1560 of SYMBOL_VALUE when working with function symbols.
1562 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1564 * ada-lang.c (resolve_subexp): Add handling of OP_REGISTER
1565 expressions. These expressions do not need to be rewriten.
1567 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1569 * dwarf2read.c (read_enumeration_type): Flag type as stub if
1570 the given die is a declaration.
1572 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1574 * ada-lang.c (ada_array_bound_from_type): Make non-static.
1575 Handle properly the case when the index type is an enumerated type.
1576 Do not return the subtype of the bounds type, just return the
1577 bounds type directly - this is not needed and is more consistent
1578 with what we do for arrays when no XA parallel type exists.
1580 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1582 * ada-lang.c (static_unwrap_type): Add forward declaration.
1583 (template_to_static_fixed_type): Fields of dynamic types sometimes
1584 also need to be unwrapped. Take this into account.
1585 (ada_to_fixed_type_1): Renamed from ada_to_fixed_type.
1586 (ada_to_fixed_type): New wrapper around ada_to_fixed_type_1.
1587 * ada-typeprint.c (ada_print_type): Get the typename from
1588 the original type, not the base type.
1590 2008-01-03 Jerome Guitton <guitton@adacore.com>
1592 * ada-lang.c (ada_value_struct_elt, to_fixed_array_type)
1593 (to_fixed_array_type, ada_to_fixed_value_create, unwrap_value):
1594 Update calls to ada_to_fixed_type.
1595 (ada_template_to_fixed_record_type_1): Ditto, but without looking
1597 (ada_to_fixed_type): Add check_tag parameter; do not look for
1598 tag if null. When looking for a tag, use a fixed record type.
1599 * ada-lang.h (ada_to_fixed_type): Add check_tag parameter.
1600 * ada-valprint.c (printable_val_type, ada_value_print): Update
1601 calls to ada_to_fixed_type.
1603 2008-01-03 Luis Machado <luisgpm@br.ibm.com>
1605 * doublest.c (convert_floatformat_to_doublest): Call
1606 floatformat_to_doublest instead of floatformat_to_double and use
1608 (convert_doublest_to_floatformat): Call floatformat_from_doublest
1609 instead of floatformat_from_double and use DOUBLEST variables.
1611 2008-01-03 Nick Hudson <nick.hudson@dsl.pipex.com>
1613 * MAINTAINERS (Write After Approval): Add self.
1615 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1617 * symfile.c (set_initial_language): Make non-static.
1618 * symfile.h (set_initial_language): Add declaration.
1619 * language.c: #include "symfile.h".
1620 (set_language): Call set_initial_language if the frame language
1621 could not be determined.
1623 2008-01-03 Paul N. Hilfinger <hilfinger@adacore.com>
1625 * eval.c (evaluate_subexp_for_address): Provide frame address to
1626 locate_var_value only if it will be needed.
1628 2008-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1630 * linux-nat.c (linux_child_follow_fork): Call also CHECK_FOR_THREAD_DB.
1632 2008-01-02 Joel Brobecker <brobecker@adacore.com>
1634 * ada-lang.c (ada_evaluate_subexp): Modify the value returned
1635 when noside is EVAL_AVOID_SIDE_EFFECTS to be an lval_memory.
1636 This is needed to make sure that any other treatment applied
1637 to the resulting value does not fail for spurious reason,
1638 such as trying to take the address of this value.
1640 2008-01-02 Joel Brobecker <brobecker@adacore.com>
1642 * ada-lang.c (ada_value_equal): Dereference reference types when
1645 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
1647 Updated copyright notices for most files.
1649 2008-01-01 Christopher Faylor <me+gdb@cgf.cx>
1651 * win32-nat.c (psapi_module_handle): Remove static.
1652 (get_module_name): Rename from psapi_get_dll_name. Revamp slightly to
1653 return first module found if base_address is zero. Don't initialize
1654 psapi function pointers here. Convert to cygwin paths when
1656 (win32_pid_to_exec_file): Use Cygwin's /proc interface to determine
1657 executable name. Use get_module_name when that fails or when
1659 (_initialize_psapi): New function. Initialize psapi stuff before it is
1660 needed or issue a warning if it is not found. Move psapi_module_handle
1663 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1665 * ada-lang.c (ada_remove_trailing_digits): New function.
1666 (ada_remove_po_subprogram_suffix): New function.
1667 (ada_decode): Improve. Move the description of the algorithm
1668 directly inside the code, instead of in the function global
1671 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1673 * ada-valprint.c (ada_val_print_1) [TYPE_CODE_REF]: Ignore deref_ref
1674 and always print the dereferenced value.
1676 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1678 * ada-lang.c (ada_evaluate_subexp, case BINOP_SUB): Add handling
1679 of the case where the first argument is a reference.
1680 (ada_evaluate_subexp, case BINOP_ADD): Likewise.
1682 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1684 Implement support for Ada interface types.
1686 * ada-lang.c (ada_is_dispatch_table_ptr_type): New function.
1687 (ada_is_ignored_field): Ignore fields that are a dispatch table
1690 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1692 * top.c (print_gdb_version): Update copyright year.
1694 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1696 * ChangeLog-2007: New ChangeLog rotation.
1697 * ChangeLog: Reset for 2008.
1698 * config/djgpp/fnchange.lst: Add entries for ChangeLog-2006 and
1701 For older changes see ChangeLog-2007.
1707 version-control: never