1 2010-03-12 H.J. Lu <hongjiu.lu@intel.com>
3 * amd64-tdep.c (amd64_word_names): Replace "sp" with "".
4 * i386-tdep.c (i386_word_names): Likewise.
6 2010-03-12 Pedro Alves <pedro@codesourcery.com>
8 * target.c (memory_xfer_partial): Don't use the stack cache if
9 inspecting trace frames.
10 * tracepoint.c (finish_tfind_command): Invalidate the target
13 2010-03-11 Jan Kratochvil <jan.kratochvil@redhat.com>
15 * solib-svr4.c (LM_ADDR_CHECK) <info_verbose>: Use printf_unfiltered
16 for the PIC displacement, print also the displacement value.
17 (svr4_exec_displacement): Print DISPLACEMENT if INFO_VERBOSE.
19 2010-03-10 Kevin Buettner <kevinb@redhat.com>
21 * remote-mips.c (close_ports, mips_initialize_cleanups)
22 (mips_exit_cleanups, mips_send_command, mips_open, pmon_open)
23 (ddb_open, lsi_open, mips_remove_breakpoint, mips_remove_watchpoint)
24 (mips_stopped_by_watchpoint, send_srec, pmon_checkset)
25 (pmon_make_fastrec, pmon_check_ack, mips_expect_download)
26 (pmon_check_entry_address, pmon_check_total, pmon_end_download)
27 (pmon_download, pmon_load_fast, _initialize_remote_mips): Add
28 comments describing each of these functions.
29 (mips_enter_debug, mips_exit_debug, common_open)
30 (mips_signal_from_protocol, pmon_makeb64, pmon_zeroset): Add
31 blank line after the comment describing the function.
33 2010-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
35 * solib-svr4.c (svr4_exec_displacement): Return now success, new
36 parameter displacementp. Update comment.
37 (svr4_relocate_main_executable): Return if non-zero SECTION_OFFSETS
38 element exists. Return if svr4_exec_displacement was not successful.
41 2010-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
42 Daniel Jacobowitz <dan@codesourcery.com>
44 * solib-svr4.c (read_program_header): Support type == -1 to read
46 (read_program_headers_from_bfd): New function.
47 (svr4_static_exec_displacement): Remove and move the comment ...
48 (svr4_exec_displacement): ... here. Remove variable found. New
49 variable displacement. Check also DYNAMIC. Verify DISPLACEMENT
50 alignment for ELF targets. Compare target vs. exec_bfd PHDRs for ELF
51 targets using read_program_headers_from_bfd. Remove the call of
52 svr4_static_exec_displacement.
54 2010-03-10 Tom Tromey <tromey@redhat.com>
56 * dwarf2read.c (struct pubnames_header): Remove.
57 (_PUBNAMES_HEADER): Remove.
58 (_ACTUAL_PUBNAMES_HEADER_SIZE): Remove.
59 (struct aranges_header): Remove.
60 (_ARANGES_HEADER, _ACTUAL_ARANGES_HEADER_SIZE): Remove.
61 (struct dwarf2_per_objfile) <pubnames, aranges>: Remove.
62 (PUBNAMES_SECTION): Remove.
63 (ARANGES_SECTION): Remove.
64 (dwarf2_locate_sections): Don't handle pubnames or aranges.
65 (dwarf2_build_psymtabs): Remove dead code.
66 (dwarf2_build_psymtabs_easy): Remove.
68 2010-03-10 Tom Tromey <tromey@redhat.com>
70 * elfread.c (elf_symfile_read): Don't call
71 dwarf2_build_frame_info.
72 * dwarf2read.c (struct dwarf2_section_info) <readin>: New field.
73 (struct dwarf2_per_objfile) <objfile>: New field.
74 (dwarf2_has_info): Now idempotent. Set objfile field.
75 (dwarf2_read_section): Check and set readin field. Call
77 (dwarf2_build_psymtabs): Don't read all sections.
78 (read_type_comp_unit_head): Read types section.
79 (create_debug_types_hash_table): Likewise.
80 (init_cu_die_reader): Add asserts.
81 (process_type_comp_unit): Add assert.
82 (dwarf2_build_psymtabs_hard): Read info section.
83 (load_partial_comp_unit): Add assert.
84 (create_all_comp_units): Read info section.
85 (load_full_comp_unit): Likewise.
86 (dwarf2_ranges_read): Read ranges section.
87 (dwarf2_record_block_ranges): Add assert.
88 (dwarf2_read_abbrevs): Read abbrev section.
89 (read_indirect_string): Read str section.
90 (dwarf_decode_line_header): Read line section.
91 (read_signatured_type_at_offset): Read types section.
92 (dwarf_decode_macros): Read macinfo section.
93 (dwarf2_symbol_mark_computed): Read loc section.
94 * dwarf2-frame.c (dwarf2_frame_find_fde): Call
95 dwarf2_build_frame_info.
96 (dwarf2_build_frame_info): Unconditionally set
97 dwarf2_frame_objfile_data on the objfile.
98 * configure.ac: Check for posix_madvise.
99 * config.in, configure: Rebuild.
101 2010-03-10 Tom Tromey <tromey@redhat.com>
103 * xcoffread.c (xcoff_start_psymtab): Update.
104 (xcoff_end_psymtab): Update.
105 * psymtab.c (allocate_psymtab): Remove dead code.
106 * psympriv.h (struct partial_symtab) <read_symtab_private>: Now
108 * mdebugread.c (parse_partial_symbols): Update.
109 (new_psymtab): Likewise.
110 * dwarf2read.c (process_psymtab_comp_unit): Update.
111 (psymtab_to_symtab_1): Update.
112 * dbxread.c (start_psymtab): Update.
113 (end_psymtab): Likewise.
115 2010-03-10 Tom Tromey <tromey@redhat.com>
117 * xcoffread.c: Include psymtab.h.
118 (xcoff_sym_fns): Update.
119 * symtab.h (struct partial_symbol): Remove.
120 (PSYMBOL_DOMAIN, PSYMBOL_CLASS): Remove.
121 (struct partial_symtab): Remove.
122 (PSYMTAB_TO_SYMTAB): Remove.
123 (lookup_partial_symbol, lookup_partial_symtab, find_pc_psymtab)
124 (find_pc_sect_psymtab): Remove.
125 (find_pc_sect_symtab_via_partial): Declare.
126 (find_pc_psymtab, find_pc_sect_psymbol, psymtab_to_symtab)
127 (find_main_psymtab): Remove.
128 (find_main_filename): Declare.
129 (fixup_psymbol_section): Remove.
130 (fixup_section): Declare.
131 * symtab.c: Include psymtab.h.
132 (lookup_symtab): Use lookup_symtab method.
133 (lookup_partial_symtab): Remove.
134 (find_pc_sect_psymtab_closer): Remove.
135 (find_pc_sect_psymtab): Remove.
136 (find_pc_sect_symtab_via_partial): New function.
137 (find_pc_psymtab, find_pc_sect_psymbol, find_pc_psymbol): Remove.
138 (fixup_section): No longer static.
139 (fixup_psymbol_section): Remove.
140 (lookup_symbol_aux): Use lookup_symbol_aux_quick.
141 (lookup_global_symbol_from_objfile): Likewise.
142 (lookup_symbol_aux_psymtabs): Remove.
143 (lookup_symbol_aux_quick): New function.
144 (lookup_symbol_global): Use lookup_symbol_aux_quick.
145 (lookup_partial_symbol): Remove.
146 (basic_lookup_transparent_type_quick): New function.
147 (basic_lookup_transparent_type): Use it.
148 (find_main_psymtab): Remove.
149 (find_main_filename): New function.
150 (find_pc_sect_symtab): Use find_pc_sect_symtab method.
151 (find_line_symtab): Use expand_symtabs_with_filename method.
152 (output_partial_symbol_filename): New function.
153 (sources_info): Use map_partial_symbol_filenames.
154 (struct search_symbols_data): New type.
155 (search_symbols_file_matches): New function.
156 (search_symbols_name_matches): Likewise.
157 (search_symbols): Use expand_symtabs_matching method.
158 (struct add_name_data): Rename from add_macro_name_data.
159 (add_macro_name): Update.
160 (add_partial_symbol_name): New function.
161 (default_make_symbol_completion_list): Use
162 map_partial_symbol_names.
163 (struct add_partial_symbol_name): New type.
164 (maybe_add_partial_symtab_filename): New function.
165 (make_source_files_completion_list): Use
166 map_partial_symbol_filenames.
167 (expand_line_sal): Use expand_symtabs_with_filename method.
168 * symmisc.c: Include psymtab.h.
169 (print_objfile_statistics): Use print_stats method.
170 (dump_objfile): Use dump method.
171 (dump_psymtab, maintenance_print_psymbols)
172 (maintenance_info_psymtabs, maintenance_check_symtabs)
173 (extend_psymbol_list): Remove.
174 * symfile.h (struct quick_symbol_functions): New struct.
175 (struct sym_fns) <qf>: New field.
176 (sort_pst_symbols): Remove.
177 (increment_reading_symtab): Declare.
178 * symfile.c: Include psymtab.h.
179 (compare_psymbols, sort_pst_symbols): Remove.
180 (psymtab_to_symtab): Remove.
181 (increment_reading_symtab): New function.
182 (symbol_file_add_with_addrs_or_offsets): Use expand_all_symtabs
184 (set_initial_language): Use find_main_filename.
185 (allocate_psymtab, discard_psymtab, cashier_psymtab): Remove.
186 (free_named_symtabs): Remove unused code.
187 (start_psymtab_common, add_psymbol_to_bcache)
188 (append_psymbol_to_list, add_psymbol_to_list, init_psymbol_list):
190 * stack.c: Include psymtab.h, symfile.h.
191 (backtrace_command_1): Use find_pc_sect_symtab_via_partial.
192 * source.h (psymtab_to_fullname): Don't declare.
193 * source.c: Include psymtab.h.
194 (select_source_symtab): Use find_last_source_symtab method.
195 (forget_cached_source_info): Use forget_cached_source_info
197 (find_and_open_source): No longer static.
198 (psymtab_to_fullname): Remove.
199 * somread.c: Include psymtab.h.
200 (som_sym_fns): Update.
201 * psympriv.h: New file.
202 * psymtab.h: New file.
203 * psymtab.c: New file.
204 * objfiles.h: (ALL_OBJFILE_PSYMTABS): Remove.
205 (ALL_PSYMTABS, ALL_PSPACE_PSYMTABS): Likewise.
206 * objfiles.c: Include psymtab.h.
207 (objfile_relocate1): Use relocate method.
208 (objfile_has_partial_symbols): Use has_symbols method.
209 * mipsread.c: Include psymtab.h.
210 (ecoff_sym_fns): Update.
211 * mi/mi-cmd-file.c: Include psymtab.h.
212 (print_partial_file_name): New function.
213 (mi_cmd_file_list_exec_source_files): Use
214 map_partial_symbol_filenames.
215 * mdebugread.c: Include psympriv.h.
216 * machoread.c: Include psympriv.h.
217 (macho_sym_fns): Update.
218 * m2-exp.y (yylex): Use lookup_symtab.
219 * elfread.c: Include psympriv.h.
220 (elf_sym_fns): Update.
221 * dwarf2read.c: Include psympriv.h.
222 * dbxread.c: Include psympriv.h.
223 (aout_sym_fns): Update.
224 * cp-support.c: Include psymtab.h.
225 (read_in_psymtabs): Remove.
226 (make_symbol_overload_list_qualified): Use
227 expand_symtabs_for_function method.
228 * coffread.c: Include psympriv.h.
229 (coff_sym_fns): Update.
230 * blockframe.c: Include psymtab.h.
231 (find_pc_partial_function): Use find_pc_sect_symtab method.
232 * ada-lang.h (ada_update_initial_language): Update.
233 * ada-lang.c: Include psymtab.h.
234 (ada_update_initial_language): Remove 'main_pst' argument.
235 (ada_lookup_partial_symbol): Remove.
236 (struct ada_psym_data): New type.
237 (ada_add_psyms): New function.
238 (ada_add_non_local_symbols): Use map_ada_symtabs method.
239 (struct add_partial_datum): New type.
240 (ada_add_partial_symbol_completions): New function.
241 (ada_make_symbol_completion_list): Use map_partial_symbol_names.
242 (ada_exception_support_info_sniffer): Update.
243 * Makefile.in (SFILES): Add psymtab.c.
244 (COMMON_OBS): Add psymtab.o.
245 (HFILES_NO_SRCDIR): Add psymtab.h, psympriv.h.
247 2010-03-10 Pierre Muller <muller@ics.u-strasbg.fr>
249 * remote-fileio.c (cygwin_conv_path): Define macro for old cygwin API.
251 2010-03-10 Sami Wagiaalla <swagiaal@redhat.com>
254 * cp-namespace.c (cp_add_using): Deleted.
255 (cp_add_using_directive): Use obstack allocations.
256 Merged the function cp_add_using into this one.
257 Added 'struct obstack *' argument.
258 (cp_scan_for_anonymous_namespaces): Updated.
259 * cp-support.h: Updated.
260 * dwarf2read.c (read_import_statement): Updated.
261 (read_namespace): Updated.
263 2010-03-10 Pierre Muller <muller@ics.u-strasbg.fr>
265 * windows-nat.c (cygwin_conv_path): Remove old macro.
267 2010-03-10 Pedro Alves <pedro@codesourcery.com>
269 * breakpoint.c (condition_command): Handle watchpoint conditions.
270 (is_hardware_watchpoint): Add comment.
271 (is_watchpoint): New.
272 (update_watchpoint): Don't reparse the watchpoint's condition
275 (watchpoint_check): Use it.
276 (bpstat_check_watchpoint): Handle it.
277 (bpstat_check_breakpoint_conditions): Evaluate watchpoint local
278 conditions in a frame where it makes sense.
279 (watch_command_1): Store the innermost block of the condition
281 (delete_breakpoint): Delete the watchpoint condition expression.
282 * breakpoint.h (struct bp_location) <cond>: Update comment.
283 (struct breakpoint): New field `cond_exp_valid_block'.
285 2010-03-09 Joel Brobecker <brobecker@adacore.com>
287 Adjust handling of Ada DIEs after dwarf2_physname patch.
288 * dwarf2read.c (dwarf2_compute_name): Add handling of Ada DIEs.
290 2010-03-09 Christopher Faylor <me+cygwin@cgf.cx>
291 Pierre Muller <muller@ics.u-strasbg.fr>
293 * windows-nat.c (cygwin_conv_path): Redefine to properly convert
295 (windows_make_so): Use non-Cygwin 1.7 specific function.
296 (windows_create_inferior): Make sure that cygallargs points to
297 original args in non Cygwin 1.7. case.
299 2010-03-09 Michael Snyder <msnyder@vmware.com>
301 * i386-tdep.c (i386_record_lea_modrm_addr): Use extract_signed_int
302 after target_read_memory to get host byte order.
303 (i386_process_record): Ditto.
305 2010-03-09 Keith Seitz <keiths@redhat.com>
307 Based on work from Daniel Jacobowitz <dan@codesourcery.com>
308 * c-typeprint.c (cp_type_print_method_args): For non-static methods,
309 print out const or volatile qualifiers, too.
310 (c_type_print_args): Add parameters show_artificial and language.
311 Skip artificial parameters when requested.
312 Use the appropriate language printer.
313 (c_type_print_varspec): Tell c_type_print_args to skip artificial
314 parameters and pass language_c.
315 * dwarf2read.c (die_list): New file global.
316 (struct partial_die_info): Update comments for name field.
317 (pdi_needs_namespace): Renamed to ...
318 (die_needs_namespace): ... this. Rewrite.
319 (dwarf2_linkage_name): Remove.
320 (add_partial_symbol): Do not predicate the call to
321 partial_die_full_name based on pdi_needs_namespace.
322 Remove call to cp_check_possible_namespace_symbols and associated
324 (guess_structure_name): Do not inspect child subprogram DIEs.
325 (dwarf2_fullname): Update comments.
326 Use die_needs_namespace to assist in computing the name.
327 (read_func_scope): Use dwarf2_name to get the DIE's name.
328 Use dwarf2_physname to get the "linkage name" of the DIE.
329 (dwarf2_add_member_field): Use dwarf2_physname instead of
331 (read_structure_type): For structs and classes, set TYPE_NAME, too.
332 (determine_class): Remove.
333 (read_partial_die): Ignore DW_AT_MIPS_linkage_name for all languages
335 (new_symbol): Unconditionally call dwarf2_name.
336 Compute the "linkage name" using dwarf2_physname.
337 Use dwarf2_name instead of dwarf2_full_name for enumerator DIEs.
338 When determining to scan for anonymous C++ namespaces, ignore
340 (dwarf2_physname): New function.
341 (dwarf2_full_name): Move content to new function and call
343 (dwarf2_compute_name): "New" function.
344 (_initialize_dwarf2_read): Initialize die_list.
345 * gnu-v3-eabi.c (gnu_v3_find_method_in): Remove unused variable
347 (gnu_v3_print_method_ptr): Use the physname for virtual methods
348 without a demangled name.
349 Print out type information for non-virtual methods.
350 * linespec.c (decode_line_1): Force ANY string using "::" (or
351 "." for java) to use decode_compound, and clean up any stray quoting.
352 If we found a file symtab, re-evaluate whether the remainder is_quoted.
353 (decode_compound): Stop consuming at an open parenthesis.
354 Keep template parameters.
355 Keep any overload information.
356 Keep keywords like "const".
357 Remove paren_pointer.
358 Move is_quoted check from set_flags to here.
359 Remove #if 0 code from 2000. Ten years is long enough.
360 (find_method): Before comparing symbol names, canonicalize the string
362 If a specific overload is requested, find it. Otherwise throw an error.
363 (find_method_overload_end): New function.
365 (decode_compound): Assume that parentheses are matched.
367 * symtab.c (symbol_find_demangled_name): Add DMGL_VERBOSE flag
369 * linespec.c (decode_line_1): Keep important keywords like
370 "const" and "volatile".
371 * symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): Remove.
372 * typeprint.h (c_type_print_args): Add declaration.
373 * ui-file.c (do_ui_file_obsavestring): New function.
374 (ui_file_obsavestring): New function.
375 * ui-file.h (ui_file_obsavestring): Add declaration.
376 * valops.c (find_overload_match): Resolve the object to
378 If the object is a data member, search the object for the member
379 and return with staticp set.
380 Use SYMBOL_NATURAL_NAME instead of SYMBOL_CPLUS_DEMANGLED_NAME.
381 Do not attempt to extract a function name from non-function types.
382 If the extracted function name and the original name are the same,
383 we don't have a C++ method.
385 From Jan Kratochvil <jan.kratochvil@redhat.com>:
386 * dwarf2read.c (new_symbol <DW_TAG_enumerator>): Call dwarf2_full_name.
388 * ada-lang.c (ada_lookup_symbol): Remove linkage_name parameters
389 and arguments from symbol lookups.
390 * ax-gdb.c (gen_expr): Likewise.
391 * cp-namespace.c (cp_lookup_symbol_nonlocal, lookup_namespace_scope,
392 cp_lookup_symbol_namespace, lookup_symbol_file, lookup_nested_type,
393 lookup_possible_namespace_symbol): Likewise.
394 * cp-support.c (read_in_psymtabs): Likewise.
395 * cp-support.h (cp_lookup_symbol_nonlocal): Likewise.
396 * language.h (la_lookup_symbol_nonlocal): Likewise.
397 * scm-valprint.c (scm_inferior_print): Likewise.
398 * solib-darwin.c (darwin_relocate_section_addresses): Likewise.
399 * solib-svr.c (elf_lookup_lib): Likewise.
400 * solib.c (show_auto_solib_add): Likewise.
401 * solist.h (lookup_lib_global, solib_global_lookup): Likewise.
402 * symmisc.c (maintenance_check_symtabs): Likewise.
403 * symtab.c (lookup_symbol_in_language, lookup_symbol_aux,
404 lookup_symbol_aux_local, lookup_symbol_aux_block,
405 lookup_symbol_from_objfile, lookup_symbol_aux_symtabs,
406 lookup_symbol_aux_psymtabs,basic_lookup_symbol_nonlocal,
407 lookup_symbol_static, lookup_symbol_global, symbol_matches_domain,
408 basic_lookup_transparent_type, find_main_psymtab,
409 lookup_block_symbol): Likewise.
410 * symtab.h (basic_lookp_symbol_nonlocal, lookup_symbol_static,
411 lookup_symbol_global, lookup_symbol_aux_block,
412 lookup_symbol_partial_symbol, lookup_block_symbol,
413 lookup_global_symbol, value_maybe_namespace_elt): Likewise.
415 2010-03-09 Pierre Muller <muller@ics.u-strasbg.fr>
417 * python/python-internal.h: Include symtab.h.
419 2010-03-09 Joel Brobecker <brobecker@adacore.com>
420 Pierre Muller <muller@ics.u-strasbg.fr>
422 * p-lang.c (is_pascal_string_type): Remove unneeded parentheses.
423 * p-valprint.c (pascal_val_print): Remove undeed block and fix
426 2010-03-08 Tom Tromey <tromey@redhat.com>
428 * breakpoint.c (breakpoint_1): Add "QUIT".
430 2010-03-08 Daniel Jacobowitz <dan@codesourcery.com>
431 Pedro Alves <pedro@codesourcery.com>
433 * solib.c (solib_find): Replace extension if
434 solib_symbols_extension is set in the target gdbarch.
435 * arm-symbian-tdep.c (arm_symbian_init_abi): Set
436 solib_symbols_extension to "sym".
437 * gdbarch.sh (solib_symbols_extension): New variable.
438 (pstring): New function.
439 * gdbarch.h, gdbarch.c: Regenerate.
441 2010-03-08 Tom Tromey <tromey@redhat.com>
445 * utils.c: Include main.h.
446 (fputs_maybe_filtered): Don't paginate if `batch_flag'.
447 (defaulted_query): Use default answer if `batch_flag'.
448 * main.h (batch_flag): Declare.
449 * main.c (batch_flag): New global.
450 (captured_main): Remove 'batch'. Update.
452 2010-03-08 Kevin Buettner <kevinb@redhat.com>
454 From Richard Sandiford, Martin M. Hunt, Corinna Vinschen,
457 * remote-mips.c (rockhopper_ops): New target_ops struct.
458 (MON_ROCKHOPPER): New mips_monitor_type.
459 (read_hex_value): New function.
460 (mips_request): Send 8-byte values with a 'T' packet. Read the
461 packet argument as a string and use read_hex_value to parse it.
462 (mips_exit_debug): Wait for response when using MON_ROCKHOPPER.
463 (rockhopper_open): New function.
464 (mips_wait): Read the PC, FP and SP fields as strings. Use
465 read_hex_value to parse them and mips_set_register to commit them.
466 (mips_set_register): New function.
467 (mips_fetch_registers): Do not cast register value to "unsigned"
468 when reading a MON_ROCKHOPPER 't' packet. Use mips_set_register.
469 (mips_store_registers): Use a 'T' packet to set registers when
470 using MON_ROCKHOPPER.
471 (pmon_end_download): Don't run initEther if using MON_ROCKHOPPER
472 and expect the total to be printed before the entry address.
473 (_initialize_remote_mips): Initialize and add rockhopper_ops.
475 2010-03-08 Kevin Buettner <kevinb@redhat.com>
477 * remote-mips.c (mips_fetch_word): Add new parameter, `valp'.
478 Change return value to int. Store value fetched in location
479 addressed by `val'. Use function's return value as success
480 or failure indicator. Adjust all callers.
482 2010-03-08 Pierre Muller <muller@ics.u-strasbg.fr>
484 * p-lang.c (is_pascal_string_type): Check that TYPE arg is non NULL.
486 2010-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
487 Hui Zhu <teawater@gmail.com>
489 * record.c (record_open_1): Check tmp_to_stopped_by_watchpoint and
490 tmp_to_stopped_data_address.
491 (record_open): Reset tmp_to_stopped_by_watchpoint and
492 tmp_to_stopped_data_address.
493 * target.c (init_dummy_target): Add to_stopped_by_watchpoint and
494 to_stopped_data_address.
496 2010-03-08 Hui Zhu <teawater@gmail.com>
498 * i386-tdep.c (i386_process_record): Initialize regnum.
500 2010-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
502 * symfile.c (addr_info_make_relative): New variable sect_name, use it.
503 Do not warn on ".gnu.liblist" and ".gnu.conflict".
505 2010-03-08 Joel Brobecker <brobecker@adacore.com>
507 Memory error when reading wrong core file.
508 * solib-svr4.c (solib_svr4_r_map): catch and print all exception
509 errors while reading the inferior memory, and return zero if
510 an exception was raised.
512 2010-03-07 Michael Snyder <msnyder@vmware.com>
514 * record.c (record_restore): Rename tmpu8 to rectype.
516 * i386-tdep.c (i386_record_lea_modrm_addr): Rename local variables
517 tmpu8, tmpi16, tmpi32, tmpulongest to addr8, addr16, addr32, addr64.
519 (i386_record_push): Rename local tmpulongest to addr.
521 (i386_process_record): Rename local tmpulongest to addr.
523 Rename local variables tmpu16, tmpu32, tmpu64 to addr16, addr32,
526 Rename local variable tmpu8 to opcode8 and regnum.
528 2010-03-07 Joel Brobecker <brobecker@adacore.com>
530 * remote.c (remote_get_ada_task_ptid): New function.
531 (init_remote_ops): Set remote_ops.to_get_ada_task_ptid.
533 2010-03-06 Christopher Faylor <me+cygwin@cgf.cx>
535 * windows-nat.c: Reorganize #ifdef __CYGWIN__ considerations into one
536 block. Define helper macros to reduce ifdefs in code.
537 (get_module_name): Use cygwin_buf_t for buffer and __PMAX for buffer
538 size. Call unadorned GetModuleFileNameEx rather than
539 GetModuleFileNameEx*.
540 (windows_make_so): Use __PMAX to denote maximum buffer size and
541 cygwin_buf_t for buffer type. Use GetSystemDirectory{W,A} as
543 (get_image_name): Use __PMAX to denote maximum buffer size.
544 (handle_load_dll): Likewise.
545 (windows_pid_to_exec_file): Likewise.
546 (windows_create_inferior): Add many accommodations for older Cygwin and
548 (bad_GetModuleFileNameExW): Control inclusion of this function based on
549 __USEWIDE conditional.
550 (bad_GetModuleFileNameExA): Likewise.
551 (_initialize_loadable): Just use real function names without the dyn_
552 part since they are defined earlier.
554 2010-03-05 Corinna Vinschen <vinschen@redhat.com>
555 Tom Tromey <tromey@redhat.com>
557 * utils.c (host_char_to_target): Add 'gdbarch' argument.
558 (parse_escape): Likewise.
559 * python/py-utils.c (unicode_to_target_string): Update.
560 (unicode_to_target_python_string): Update.
561 (target_string_to_unicode): Update.
562 * printcmd.c (printf_command): Update.
563 * p-exp.y (yylex): Update.
564 * objc-exp.y (yylex): Update.
565 * mi/mi-parse.c: Include charset.h.
566 (mi_parse_escape): New function.
567 (mi_parse_argv): Use it.
568 * jv-exp.y (yylex): Update.
569 * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New
571 (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset.
572 * gdbarch.sh (auto_charset, auto_wide_charset): New.
573 * gdbarch.c: Rebuild.
574 * gdbarch.h: Rebuild.
575 * defs.h (parse_escape): Update.
576 * cli/cli-setshow.c: Include arch-utils.h.
577 (do_setshow_command): Update.
578 * cli/cli-cmds.c (echo_command): Update.
579 * charset.h (target_charset, target_wide_charset): Update.
580 * charset.c: Include arch-utils.h.
581 (target_charset_name): Default to "auto".
582 (target_wide_charset_name): Likewise.
583 (show_target_charset_name): Handle "auto".
584 (show_target_wide_charset_name): Likewise.
585 (be_le_arch): New global.
586 (set_be_le_names): Add 'gdbarch' argument.
587 (validate): Likewise. Don't call set_be_le_names.
588 (set_charset_sfunc, set_host_charset_sfunc)
589 (set_target_charset_sfunc, set_target_wide_charset_sfunc):
591 (target_charset): Add 'gdbarch' argument.
592 (target_wide_charset): Likewise. Remove 'byte_order' argument.
593 (auto_target_charset_name): New global.
594 (default_auto_charset, default_auto_wide_charset): New functions.
595 (_initialize_charset): Set auto_target_charset_name. Allow "auto"
596 for target charsets. Copy result of nl_langinfo. Use GetACP if
598 * c-lang.c (charset_for_string_type): Add 'gdbarch' argument,
599 remove 'byte_order' argument. Update.
600 (classify_type): Likewise.
601 (c_emit_char): Update.
602 (c_printchar): Update.
603 (c_printstr): Update.
604 (c_get_string): Update.
605 (evaluate_subexp_c): Update.
606 * arch-utils.h (default_auto_charset, default_auto_wide_charset):
608 * python/python.c (gdbpy_target_charset): New function.
609 (gdbpy_target_wide_charset): Likewise.
610 (GdbMethods): Update.
613 2010-03-05 Ulrich Weigand <uweigand@de.ibm.com>
615 * symfile.c (build_section_addr_info_from_objfile): Do not mask
616 off high address bits.
618 2010-03-05 Ulrich Weigand <uweigand@de.ibm.com>
620 * python/py-lazy-string.c (gdbpy_extract_lazy_string): Extract
621 address as UnsignedLongLong, not LongLong.
623 2010-03-05 Kevin Buettner <kevinb@redhat.com>
624 Pedro Alves <pedro@codesourcery.com>
626 * remote-mips.c (gdbthread.h): Include.
627 (remote_mips_ptid): Declare.
628 (mips_error): Only mourn the inferior when inferior_ptid is non-null.
629 (common_open): Set inferior_ptid, add it as an inferior, and
630 as a thread too. Delete FIXME comment regarding start_remote().
631 (mips_close): Invoke generic_mourn_inferior().
632 (mips_kill): Make sure that target_mourn_inferior is invoked.
633 (mips_mourn_inferior): Don't invoke generic_mourn_inferior, as
634 it's now invoked from mips_close().
635 (mips_load): Don't null out inferior_ptid. Don't call
636 clear_symtab_users().
637 (mips_thread_alive, mips_pid_to_str): New functions.
638 (_initialize_remote_mips): Initialize remote_mips_ptid. Initialize
639 to_thread_alive and to_pid_to_str operations.
641 2010-03-04 Tom Tromey <tromey@redhat.com>
643 * dwarf2read.c (skip_one_die) <DW_FORM_ref_addr>: Use offset size
644 in DWARF 3 and later.
645 (read_attribute_value) <DW_FORM_ref_addr>: Likewise.
647 2010-03-04 Keith Seitz <keiths@redhat.com>
649 * linespec.c (decode_line_1): Update comments for is_quote_enclosed.
650 If the filename portion of the linespec was quoted, recheck the
651 remainder for additional quoting.
652 (locate_first_half): Skip over completer chars, too.
654 2010-03-04 Tom Tromey <tromey@redhat.com>
656 * printcmd.c (printf_command): Pass dummy argument to
659 2010-03-04 Doug Evans <dje@google.com>
661 * arm-tdep.c (arm_make_stub_cache): Delete unused locals reg,
664 * arm-tdep.c (arm_stub_unwind_sniffer): Add comment.
666 2010-03-04 Pedro Alves <pedro@codesourcery.com>
668 * breakpoint.c (update_watchpoint): Create a sentinel location if
669 the software watchpoint isn't watching any memory.
670 (breakpoint_address_bits): Skip dummy software watchpoint locations.
672 2010-03-04 Pedro Alves <pedro@codesourcery.com>
674 * utils.c (fputs_maybe_filtered): Check if there's already a top
675 level interpreter before dereferencing it. If there isn't one,
676 don't paginate either.
678 2010-03-04 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
680 * arm-tdep.c (arm_pc_is_thumb): Add heuristic that tries to get
681 the state right when single stepping.
682 (arm_get_next_pc_raw, thumb_get_next_pc_raw): New functions.
683 Get the next PC along with the instruction state.
684 (thumb_get_next_pc): Remove.
685 (arm_get_next_pc): Modified to use arm_get_next_pc_raw.
687 2010-03-04 Hui Zhu <teawater@gmail.com>
689 * i386-tdep.c (i386_process_record): Change "addr" to "tmpu64".
691 2010-03-03 Pedro Alves <pedro@codesourcery.com>
693 * utils.c (fputs_maybe_filtered): Always disable pagination if the
694 top level interpreter is MI.
696 2010-03-03 Stan Shebs <stan@codesourcery.com>
698 * remote.c (remote_download_tracepoint): Iterate over locations.
699 * tracepoint.c (validate_actionline): Ditto.
700 (encode_actions): Add location argument.
701 (trace_dump_command): Check all locations to see if stepping
704 2010-03-03 H.J. Lu <hongjiu.lu@intel.com>
705 Eli Zaretskii <eliz@gnu.org>
707 * NEWS: Add X86 general purpose registers section.
709 2010-03-03 Tom Tromey <tromey@redhat.com>
712 * varobj.c (install_new_value): Handle case where new print_value
715 2010-03-03 Dainis Jonitis <jonitis@gmail.com>
718 * printcmd.c (printf_command): Print end of format string using
721 2010-03-02 Tom Tromey <tromey@redhat.com>
723 * mi/mi-cmd-break.c (mi_read_next_line): Add missing 'void'.
724 * defs.h (read_command_lines_1): Add missing 'void'.
725 * cli/cli-script.c (recurse_read_control_structure): Add missing
727 (read_next_line): Likewise.
728 (read_command_lines_1): Likewise.
730 2010-03-02 Ulrich Weigand <uweigand@de.ibm.com>
732 * spu-tdep.c (spu_analyze_prologue): Track instruction to
733 store backchain as part of prologue.
735 2010-03-02 Daniel Jacobowitz <dan@codesourcery.com>
737 * progspace.c (update_address_spaces): Update inferior address spaces
740 2010-03-02 Doug Evans <dje@google.com>
742 * dwarf2read.c (add_partial_subprogram): Add missing baseaddr to
743 lowpc,highpc args to addrmap_set_empty.
745 2010-03-02 H.J. Lu <hongjiu.lu@intel.com>
747 * amd64-tdep.c (amd64_byte_names): New.
748 (amd64_word_names): Likewise.
749 (amd64_dword_names): Likewise.
750 (amd64_pseudo_register_name): Likewise.
751 (amd64_pseudo_register_read): Likewise.
752 (amd64_pseudo_register_write): Likewise.
753 (amd64_init_abi): Set num_byte_regs, num_word_regs, num_dword_regs
754 and num_mmx_regs. Call set_gdbarch_pseudo_register_read,
755 set_gdbarch_pseudo_register_write and
756 set_tdesc_pseudo_register_name. Don't call
757 set_gdbarch_num_pseudo_regs. Don't set mm0_regnum.
759 * i386-tdep.c (i386_num_mmx_regs): Removed.
760 (i386_num_pseudo_regs): Likewise.
761 (i386_byte_names): New.
762 (i386_word_names): Likewise.
763 (i386_byte_regnum_p): Likewise.
764 (i386_word_regnum_p): Likewise.
765 (i386_mmx_regnum_p): Updated.
766 (i386_pseudo_register_name): Make it global. Handle byte and
767 word pseudo-registers.
768 (i386_pseudo_register_read): Likewise.
769 (i386_pseudo_register_write): Likewise.
770 (i386_pseudo_register_type): Handle byte, word and dword
772 (i386_register_reggroup_p): Don't include pseudo
773 registers, except for MXX, in any register groups. Don't
774 include pseudo byte, word, dword registers in general_reggroup.
775 (i386_gdbarch_init): Set num_byte_regs, num_word_regs,
776 num_dword_regs, al_regnum, ax_regnum and eax_regnum. Put MMX
777 pseudo-registers after word pseudo-registers. Call
778 set_gdbarch_num_pseudo_regs after calling gdbarch_init_osabi.
780 * i386-tdep.h (gdbarch_tdep): Add num_mmx_regs, num_byte_regs,
781 al_regnum, num_word_regs, ax_regnum, num_dword_regs and
783 (i386_byte_regnum_p): New.
784 (i386_word_regnum_p): Likewise.
785 (i386_dword_regnum_p): Likewise.
786 (i386_pseudo_register_name): Likewise.
787 (i386_pseudo_register_read): Likewise.
788 (i386_pseudo_register_write): Likewise.
790 2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
792 * target-descriptions.c (tdesc_type): Remove
793 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
794 (tdesc_predefined_types): Likewise.
795 (tdesc_gdb_type): Likewise. Pass NULL to append_flags_type_flag
796 if flag name is empty.
797 (maint_print_c_tdesc_cmd): Handle TDESC_TYPE_FLAGS.
799 * features/i386/32bit-core.xml: Define i386_eflags.
800 * features/i386/64bit-core.xml: Likewise.
802 * features/i386/32bit-sse.xml: Define i386_mxcsr.
803 * features/i386/64bit-sse.xml: Likewise.
805 * features/i386/amd64-linux.c: Regenerated.
806 * features/i386/amd64.c: Likewise.
807 * features/i386/i386-linux.c: Likewise.
808 * features/i386/i386.c: Likewise.
810 2010-03-01 Daniel Jacobowitz <dan@codesourcery.com>
812 * gdbtypes.c (append_composite_type_field_raw): New.
813 (append_composite_type_field_aligned): Use the new function.
814 * gdbtypes.h (append_composite_type_field_raw): Declare.
815 * target-descriptions.c (struct tdesc_type_field): Add start and end.
816 (struct tdesc_type_flag): New type.
817 (struct tdesc_type): Add TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS to
818 kind. Add size to u.u. Add u.f for flags.
819 (tdesc_gdb_type): Handle TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS.
820 (tdesc_free_type): Likewise.
821 (tdesc_create_struct, tdesc_set_struct_size, tdesc_create_flags): New.
822 (tdesc_add_field): Handle TDESC_TYPE_STRUCT.
823 (tdesc_add_bitfield, tdesc_add_flag): New.
824 * target-descriptions.h (tdesc_create_struct, tdesc_set_struct_size)
825 (tdesc_create_flags, tdesc_add_bitfield, tdesc_add_flag): Declare.
826 * xml-tdesc.c (struct tdesc_parsing_data): Rename current_union to
827 current_type. Add current_type_size and current_type_is_flags.
828 (tdesc_start_union): Clear the new fields.
829 (tdesc_start_struct, tdesc_start_flags): New.
830 (tdesc_start_field): Handle struct fields, including bitfields.
831 (field_attributes): Make type optional. Add start and end.
832 (union_children): Rename to struct_union_children.
833 (union_attributes): Rename to struct_union_attributes. Add optional
835 (flags_attributes): New.
836 (feature_children): Add struct and flags.
837 * features/gdb-target.dtd: Add flags and struct to features.
838 Make field type optional. Add field start and end.
840 2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
842 * amd64-linux-nat.c (AMD64_LINUX_USER64_CS): New.
843 (amd64_linux_read_description): Likewise.
844 (_initialize_amd64_linux_nat): Set to_read_description to
845 amd64_linux_read_description.
847 * amd64-linux-tdep.c: Include "features/i386/amd64-linux.c".
848 (amd64_linux_register_name): Removed.
849 (amd64_linux_register_type): Likewise.
850 (amd64_linux_core_read_description): New.
851 (amd64_linux_init_abi): Set target description to
852 tdesc_amd64_linux if needed. Support orig_rax in target
853 description. Don't call set_gdbarch_register_name nor
854 set_gdbarch_register_type. Call
855 set_gdbarch_core_read_description.
856 (_initialize_amd64_linux_tdep): Call
857 initialize_tdesc_amd64_linux.
859 * amd64-linux-tdep.h (tdesc_amd64_linux): New.
861 * amd64-tdep.c: Include "features/i386/amd64.c".
862 (amd64_register_names): Removed.
863 (amd64_register_name): Likewise.
864 (amd64_register_type): Likewise.
865 (amd64_init_abi): Set num_core_regs and register_names. Set
866 target description to tdesc_amd64 if needed. Don't call
867 set_gdbarch_register_name nor set_gdbarch_register_type.
868 (_initialize_amd64_tdep): New.
870 * i386-linux-nat.c (i386_linux_read_description): New.
871 (_initialize_i386_linux_nat): Set to_read_description to
872 i386_linux_read_description.
874 * i386-linux-tdep.c: Include "features/i386/i386-linux.c".
875 (i386_linux_register_name): Removed.
876 (i386_linux_core_read_description): New.
877 (i386_linux_read_description): Likewise.
878 (i386_linux_init_abi): Don't call set_gdbarch_register_name.
879 Set target description to tdesc_i386_linux if needed. Support
880 orig_eax. Set register_reggroup_p. Call
881 set_gdbarch_core_read_description.
882 (_initialize_i386_linux_tdep): Call initialize_tdesc_i386_linux.
884 * i386-linux-tdep.h (tdesc_i386_linux): New.
886 * i386-nto-tdep.c (i386nto_regset_id): Replace I386_NUM_FREGS
889 * i386-tdep.c: Include "features/i386/i386.c".
890 (i386_register_names): Make it const.
891 (i386_mmx_names): Likewise.
892 (i386_num_register_names): Removed.
893 (i386_register_name): Likewise.
894 (i386_eflags_type): Likewise.
895 (i386_mxcsr_type): Likewise.
896 (i386_sse_type): Likewise.
897 (i386_register_type): Likewise.
898 (i387_ext_type): Call tdesc_find_type instead of arch_float_type.
899 (i386_pseudo_register_name): New.
900 (i386_pseudo_register_type): Likewise.
901 (i386_mmx_type): Make it static.
902 (i386_gdbarch_init): Check arch. Replace I386_NUM_FREGS with
903 I387_NUM_REGS. Set num_core_regs and register_names. Don't
904 call set_gdbarch_register_name nor set_gdbarch_register_type.
905 Set register_reggroup_p. Set target description to tdesc_i386
906 if needed. Call set_tdesc_pseudo_register_type,
907 set_tdesc_pseudo_register_name and tdesc_use_registers.
908 (_initialize_i386_tdep): Call initialize_tdesc_i386.
909 initialize_tdesc_x86_64.
911 * i386-tdep.h (gdbarch_tdep): Remove i386_eflags_type,
912 i386_mxcsr_type and i386_sse_type. Add num_core_regs,
913 register_names, tdesc and register_reggroup_p.
914 (I386_NUM_FREGS): Removed.
915 (i386_eflags_type): Likewise.
916 (i386_mxcsr_type): Likewise.
917 (i386_mmx_type): Likewise.
918 (i386_sse_type): Likewise.
919 (i386_register_name): Likewise.
920 (i386_regnum): Add I386_MXCSR_REGNUM.
921 (I386_SSE_NUM_REGS): Defined with I386_MXCSR_REGNUM.
923 * i387-tdep.h (I387_NUM_REGS): New.
925 * regformats/i386/i386-linux.dat: Generated.
926 * regformats/i386/i386.dat: Likewise.
927 * regformats/i386/amd64-linux.dat: Likewise.
928 * regformats/i386/amd64.dat: Likewise.
930 * regformats/reg-i386-linux.dat: Removed.
931 * regformats/reg-i386.dat: Likewise.
932 * regformats/reg-x86-64-linux.dat: Likewise.
933 * regformats/reg-x86-64.dat: Likewise.
935 2010-03-01 Corinna Vinschen <vinschen@redhat.com>
937 * remote-fileio.c (remote_fileio_func_rename): Use Cygwin 1.7
938 cygwin_conv_path API rather than the deprecated
939 cygwin_conv_to_full_posix_path.
941 (GetModuleFileNameExA): Undefine for Cygwin.
942 (GetModuleFileNameExW): Define for Cygwin.
943 (get_module_name): Change size of pathbuf to PATH_MAX for Cygwin.
944 Call GetModuleFileNameExW and convert path to POSIX using
946 (windows_make_so): Always define p. Drop unused variable m.
947 Don't use Win32 functions to check file existance, rather use
948 access on Cygwin. Fetch system directory using GetSystemDirectoryW.
949 Use canonicalize_file_name to get full path.
950 (get_image_name): Use wcstombs, rather than WideCharToMultiByte
951 to convert Unicode pathname to multibyte on Cygwin. Otherwise,
952 use correct target buffer size in call to WideCharToMultiByte.
953 (handle_load_dll): Change size of dll_buf to PATH_MAX for Cygwin.
954 (windows_pid_to_exec_file): Change size of path to PATH_MAX for Cygwin.
955 (windows_create_inferior): Convert all paths and arguments to wchar_t
956 and use CreateProcessW on Cygwin.
957 (_initialize_windows_nat): Disable DOS-style path warning on Cygwin.
958 (bad_GetModuleFileNameExA): Undefine for Cygwin.
959 (bad_GetModuleFileNameExW): Define for Cygwin.
960 (_initialize_loadable): Load GetModuleFileNameExW into
961 dyn_GetModuleFileNameExW on Cygwin. Don't load ANSI function on Cygwin.
963 2010-02-28 Phil Muldoon <pmuldoon@redhat.com>
966 * python/py-frame.c (frapy_read_var): Add block argument and logic
967 to cope with user provided blocks.
969 2010-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
971 * infcall.c (call_function_by_hand): Remove gdb_assert on sp and old_sp.
974 2010-02-28 Corinna Vinschen <vinschen@redhat.com>
976 * Makefile.in (SUBDIR_MI_OBS): Move mi-common.o from here...
977 (COMMON_OBS): ... to here since it's used unconditionally.
978 (SUBDIR_MI_SRCS): Move mi/mi-common.c from here...
981 2010-02-26 David Daney <ddaney@caviumnetworks.com>
983 * mips-linux-tdep.c: Update struct sigframe comments.
984 (SIGFRAME_CODE_OFFSET): Delete macro.
985 (mips_linux_o32_sigframe_init): Calculate sigcontext_base using
987 (mips_linux_n32n64_sigframe_init): Same.
989 2010-02-26 Kevin Buettner <kevinb@redhat.com>
991 * remote-mips.c (mips_load): Don't use pseudo-register when
992 invalidating regcache.
994 2010-02-26 Daniel Jacobowitz <dan@codesourcery.com>
996 * arm-tdep.c (thumb_get_next_pc): Correct conditional branch opcode.
998 2010-02-26 Pedro Alves <pedro@codesourcery.com>
1000 * NEWS: Add "New targets" section, and mention ARM Symbian
1003 2010-02-26 Ulrich Weigand <uweigand@de.ibm.com>
1005 * dwarf2loc.c (struct piece_closure): Remove ARCH member,
1006 add ADDR_SIZE member.
1007 (allocate_piece_closure): Update.
1008 (copy_pieced_value_closure): Likewise.
1009 (dwarf2_evaluate_loc_desc): Likewise.
1010 (read_pieced_value): Use DWARF address size instead of
1011 GDB's gdbarch_addr_bit as size of values on the DWARF stack.
1013 2010-02-26 Phil Muldoon <pmuldoon@redhat.com>
1014 Tom Tromey <tromey@redhat.com>
1016 * python/py-type.c (typy_lookup_typename): Add in block argument.
1017 If provided restrict lookup to specified blocks.
1018 (gdbpy_lookup_type): Likewise.
1019 (typy_lookup_type): Likewise.
1021 2010-02-25 Daniel Jacobowitz <dan@codesourcery.com>
1026 * arm-symbian-tdep.c: New.
1027 * configure.tgt (arm*-*-symbianelf*): New target.
1028 (*-*-symbianelf*): New OS.
1029 * osabi.c (gdb_osabi_names): Add Symbian.
1030 * defs.h (gdb_osabi): Add GDB_OSABI_SYMBIAN.
1031 * Makefile.in (ALL_TARGET_OBJS): Add arm-symbian-tdep.o.
1032 (ALLDEPFILES): Add arm-symbian-tdep.c.
1034 2010-02-25 Daniel Jacobowitz <dan@codesourcery.com>
1036 * symfile.c (find_lowest_section): Include SEC_ALLOC sections.
1038 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1040 * mi/mi-main.c (mi_cmd_execute): Fix typo.
1042 2010-02-24 Phil Muldoon <pmuldoon@redhat.com>
1043 Tom Tromey <tromey@redhat.com>
1044 Thiago Jung Bauermann <bauerman@br.ibm.com>
1046 * python/python.c (_initialize_python): Call
1047 gdbpy_initialize_symtabs, gdbpy_initialize_symbols and
1048 gdbpy_initialize_blocks.
1049 * python/python-internal.h: Declare struct symbol, block and
1050 symtab_and_line. Declare block_object_type and
1052 (gdbpy_lookup_symbol gdbpy_block_for_pc)
1053 (symtab_and_line_to_sal_object, symtab_to_symtab_object)
1054 (symbol_to_symbol_object, block_to_block_object)
1055 (gdbpy_initialize_symtabs,gdbpy_initialize_symbols)
1056 (gdbpy_initialize_blocks ): Declare.
1057 * python/py-frame.c (frapy_block, frapy_function, frapy_find_sal)
1058 (frapy_select): Add methods.
1059 (frapy_read_var): Add symbol branch.
1060 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-symbol, py-symtab,
1062 (SUBDIR_PYTHON_SRCS): Likewise.
1063 (py-symbol.o): New rule.
1064 (py-symtab.o): Likewise.
1065 (py-block.o): Likewise.
1066 * python/py-symbol.c: New file.
1067 * python/py-symtab.c: Likewise.
1068 * python/py-block.c: Likewise.
1070 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1074 * inferior.h (prepare_for_detach): Declare.
1075 (struct inferior) <detaching>: New field.
1076 * infrun.c (prepare_for_detach): New.
1077 (handle_inferior_event) <random signal>: Don't stop if detaching.
1078 * target.c (target_detach): Call prepare_for_detach.
1080 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1082 Per-process displaced stepping queue.
1084 * infrun.c (displaced_step_ptid, displaced_step_request_queue)
1085 (displaced_step_gdbarch, displaced_step_closure,
1086 (displaced_step_original, displaced_step_copy): Move globals to
1088 (struct displaced_step_inferior_state): ... new structure.
1089 (displaced_step_inferior_states): New global.
1090 (get_displaced_stepping_state, add_displaced_stepping_state)
1091 (remove_displaced_stepping_state, infrun_inferior_exit): New
1093 (displaced_step_clear): Add displaced_step_inferior_state
1094 parameter, and adjust to handle it.
1095 (displaced_step_clear_cleanup): Parameter is now a
1096 displaced_step_inferior_state. Adjust.
1097 (displaced_step_prepare): Adjust.
1098 (displaced_step_fixup, displaced_step_fixup)
1099 (infrun_thread_ptid_changed, resume): Adjust.
1100 (init_wait_for_inferior): Don't call displaced_step_clear.
1101 (infrun_thread_stop_requested): Rewrite.
1102 (_initialize_infrun): Install infrun_inferior_exit as
1103 inferior_exit observer.
1105 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1107 * inferior.h (ptid_match): Declare.
1108 * infrun.c (ptid_match): New.
1109 * remote.c (queued_stop_reply): Rewrite and use ptid_match.
1110 (handle_notification): Add debug output.
1111 * linux-nat.c (ptid_match): Delete.
1113 2010-02-24 David S. Miller <davem@davemloft.net>
1115 * gdb_ptrace.h (PT_SYSCALL): If PTRACE_SYSCALL is available, use it.
1116 * syscalls/sparc-linux.xml: New.
1117 * syscalls/sparc64-linux.xml: New.
1118 * Makefile.in (XML_SYSCALL_FILES): Add new syscall XML files.
1119 * sparc-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC32): Define.
1120 (sparc32_linux_get_syscall_number): New function.
1121 (sparc32_linux_init_abi): Set syscall XML file name and hook up
1122 syscall number fetcher.
1123 * sparc64-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC64): Define.
1124 (sparc64_linux_get_syscall_number): New function.
1125 (sparc64_linux_init_abi): Set syscall XML file name and hook up
1126 syscall number fetcher.
1128 2010-02-24 Vladimir Prus <vladimir@codesourcery.com>
1132 * breakpoint.c (clear_syscall_counts): Take struct inferior*.
1133 * inferior.c (add_inferior_silent): Notify inferior_added
1135 (delete_inferior_1): Notify inferior_removed observer.
1136 (exit_inferior_1): Pass inferior, not pid, to observer.
1137 (inferior_appeared): Likewise.
1138 (add_inferior_with_spaces): New.
1139 (add_inferior_command): Use the above.
1140 * inferior.h (delete_inferior_1, add_inferior_with_spaces):
1143 * inflow.c (inflow_inferior_exit): Likewise.
1144 * jit.c (jit_inferior_exit_hook): Likewise.
1146 * mi/mi-cmds.c (mi_cmds): Register add-inferior and
1148 * mi/mi-cmds.h (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
1149 * mi/mi-interp.c (mi_inferior_added, mi_inferior_removed): New.
1150 (report_initial_inferior): New.
1151 (mi_inferior_removed): Register the above. Make sure
1152 inferior_added observer is called on the first inferior.
1153 (mi_new_thread, mi_thread_exit): Thread group is now identified by
1154 inferior number, not pid.
1155 (mi_solib_loaded, mi_solib_unloaded): Report which inferiors are
1157 * mi/mi-main.c (current_context): New.
1158 (proceed_thread_callback): Use typed closure.
1159 Proceed everything if pid is 0. Most implementation split into
1160 (proceed_thread): ... this.
1161 (run_one_inferior): New.
1162 (mi_cmd_exec_continue, mi_cmd_exec_interrupt, mi_cmd_exec_run):
1163 Adjust for multiexec behaviour.
1164 (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
1165 (mi_cmd_execute): Handle the 'thread-group' option here.
1166 Do some extra checks.
1167 * mi-parse.c (mi_parse): Handle the --all and --thread-group
1169 * mi-parse.h (struct mi_parse): New fields all and thread_group.
1171 2010-02-24 Vladimir Prus <vladimir@codesourcery.com>
1173 Make -exec-run a proper MI commands.
1175 * mi/mi-cmds.h (mi_cmd_exec_run): Declare.
1176 * mi/mi-cmds.c (mi_cmds): Adjust.
1177 * mi/mi-main.c (mi_cmd_exec_run): New.
1179 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1180 Stan Shebs <stan@codesourcery.com>
1182 * tracepoint.h (set_traceframe_number)
1183 (cleanup_restore_current_traceframe): Declare.
1184 * tracepoint.c (set_traceframe_number): New.
1185 (struct current_traceframe_cleanup): New.
1186 (do_restore_current_traceframe_cleanup)
1187 (restore_current_traceframe_cleanup_dtor)
1188 (make_cleanup_restore_current_traceframe): New.
1189 * infrun.c: Include tracepoint.h.
1190 (fetch_inferior_event): Switch out and in of tfind mode.
1192 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1194 * breakpoint.c (breakpoint_init_inferior): Also delete
1195 bp_shlib_event breakpoints.
1196 * solib-frv.c (enable_break): Remove call to
1197 remove_solib_event_breakpoints.
1198 * solib-svr4.c (enable_break): Ditto.
1199 * solib-darwin.c (darwin_solib_create_inferior_hook): Ditto.
1200 * solib-pa64.c (pa64_solib_create_inferior_hook): Ditto.
1201 * solib-som.c (som_solib_create_inferior_hook): Ditto.
1202 * solib-spu.c (spu_enable_break): Ditto.
1204 2010-02-23 Harald Koenig <H.Koenig@science-computing.de>
1206 * c-exp.y (token_and_value): s/union YYSTYPE/YYSTYPE.
1208 2010-02-23 Harald Koenig <H.Koenig@science-computing.de>
1210 * varobj.c (varobj_update): Avoid non-constants in initializers.
1212 2010-02-23 Tom Tromey <tromey@redhat.com>
1214 * dwarf2loc.c (read_pieced_value) <DWARF_VALUE_STACK>: Correctly
1215 handle big-endian values.
1216 (dwarf2_evaluate_loc_desc) <DWARF_VALUE_STACK>: Likewise.
1218 2010-02-22 Pedro Alves <pedro@codesourcery.com>
1223 * breakpoint.c (insert_bp_location): If inserting the read
1224 watchpoint failed, fallback to an access watchpoint.
1225 (bpstat_check_watchpoint): Stop for read watchpoint triggers even
1226 if the value changed, if not watching the same memory for writes.
1227 (watchpoint_locations_match): Add comment.
1228 (update_global_location_list): Copy the location's watchpoint type.
1229 * i386-nat.c (i386_length_and_rw_bits): It's an internal error to
1230 handle read watchpoints here.
1231 (i386_insert_watchpoint): Read watchpoints aren't supported.
1232 * remote.c (remote_insert_watchpoint): Return 1 for unsupported
1234 * target.h (target_insert_watchpoint): Update description.
1236 2010-02-19 Tom Tromey <tromey@redhat.com>
1238 * p-typeprint.c (pascal_type_print_varspec_prefix): Update.
1239 * m2-typeprint.c (m2_print_type): Update.
1240 * gdbtypes.c (recursive_dump_type): Update.
1241 (copy_type_recursive): Update.
1242 * c-typeprint.c (c_type_print_varspec_prefix): Update.
1243 (c_type_print_base): Update.
1244 * gdbtypes.h (TYPE_CODE_TEMPLATE, TYPE_CODE_TEMPLATE_ARG):
1246 (struct cplus_struct_type) <ntemplate_args>: Remove.
1247 <struct template_arg>: Remove.
1248 <is_dynamic>: Move earlier.
1249 (TYPE_TEMPLATE_ARGS): Remove.
1250 (TYPE_NTEMPLATE_ARGS): Remove.
1251 (TYPE_TEMPLATE_ARG): Remove.
1253 2010-02-19 Tom Tromey <tromey@redhat.com>
1255 PR c++/8693, PR c++/9496:
1256 * cp-namespace.c (cp_lookup_nested_type): Handle TYPE_CODE_UNION.
1257 * c-exp.y (lex_one_token): Rename from yylex. Don't call
1258 write_dollar_variable. Don't try to classify NAME tokens.
1259 (token_and_value): New type.
1260 (token_fifo, popping, name_obstack): New globals.
1261 (classify_name): New function.
1262 (classify_inner_name): Likewise.
1264 (VARIABLE): Now has type sval.
1265 (exp : VARIABLE): Call write_dollar_variable.
1266 (qualified_name): Use TYPENAME, not typebase. Add production for
1267 multiple "::" instances.
1268 (variable): Use name_not_typename.
1269 (qualified_type): Remove.
1272 2010-02-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1274 * symfile.c (addr_info_make_relative): Extend comment. Move SECT to
1275 a more inner block. Initialize ADDR by LOWER_OFFSET only if it was
1276 found by bfd_get_section_by_name.
1277 * symfile.h (struct section_addr_info) <sectindex>: New comment.
1279 2010-02-19 Joel Brobecker <brobecker@adacore.com>
1281 * NEWS: Add new "[...] since 7.1" section. Rename the "[...] since
1282 7.0 section" into "Changes in 7.1".
1284 2010-02-19 Joel Brobecker <brobecker@adacore.com>
1286 GDB 7.1 branch created (branch timestamp: 2010-02-18 20:00 UTC)
1287 * version.in: Bump version to 7.1.50.20100219-cvs.
1289 2010-02-18 Harald Koenig <H.Koenig@science-computing.de>
1291 * mi/mi-main.c (mi_cmd_exec_jump): Drop unneeded `return'.
1292 * symfile.c (symfile_map_offsets_to_segments): Fix assertion.
1294 2010-02-17 Tom Tromey <tromey@redhat.com>
1296 * NEWS: Add Python API Improvements section.
1298 2010-02-18 Daniel Jacobowitz <dan@codesourcery.com>
1300 * NEWS: Correct typo.
1302 2010-02-17 Tom Tromey <tromey@redhat.com>
1304 * objfiles.c (gdb_bfd_ref): Handle abfd==NULL.
1306 2010-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1308 * symfile.c (build_section_addr_info_from_objfile): Include sections
1309 only if they are SEC_ALLOC or SEC_LOAD.
1311 2010-02-17 H.J. Lu <hongjiu.lu@intel.com>
1314 * solib-svr4.c (enable_break): Check size of CORE_ADDR instead
1315 of ULONGEST for address size.
1317 2010-02-17 Tom Tromey <tromey@redhat.com>
1319 * NEWS: Add C++ improvements section.
1321 2010-02-17 Ulrich Weigand <uweigand@de.ibm.com>
1323 * python/python-internal.h [!WITH_THREAD] (PyGILState_Release,
1324 PyThreadState_Swap): Avoid "statement with no effect" warning.
1326 2010-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1328 * solib-svr4.c (enable_break <target_auxv_search>): New variable
1329 addr_bit. Adjust LOAD_ADDR sign for cross-arch inferiors.
1331 2010-02-17 Tristan Gingold <gingold@adacore.com>
1332 Petr HluzÃn <petr.hluzin@gmail.com>
1334 * avr-tdep.c (avr_scan_prologue): Convert an if statement to a
1335 gdb_assert. Fix info->size for SIG prologue.
1337 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
1339 * infcmd.c (show_inferior_tty_command): Check for NULL.
1340 Correct output message.
1342 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
1344 * linespec.c (decode_line_1): Handle FILE:FUNCTION even if
1345 FUNCTION contains parentheses. Improve removal of a trailing
1348 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
1350 * gcore.c (do_bfd_delete_cleanup): New function.
1351 (gcore_command): Use it. Discard the cleanup after success.
1352 (gcore_copy_callback): Delete dead code.
1354 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
1356 * symfile.c (addr_info_make_relative): Always use
1357 find_lowest_section.
1359 2010-02-16 Sami Wagiaalla <swagiaal@redhat.com>
1361 * NEWS: Added entry for namespace fixes.
1363 2010-02-15 Tom Tromey <tromey@redhat.com>
1365 * dwarf2read.c (guess_structure_name): Allocate name on the
1368 2010-02-15 Tom Tromey <tromey@redhat.com>
1370 * c-typeprint.c (c_type_print_base): Reverse order of test.
1372 2010-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1374 * solib-svr4.c (LM_ADDR_CHECK): New variable minpagesize. Optionally
1375 initialize it from ELF BFD. Extend the prelink condition by it.
1377 2010-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1379 * defs.h (parse_pid_to_attach): New.
1380 * utils.c (parse_pid_to_attach): New.
1381 * darwin-nat.c (darwin_attach): Replace ARGS parsing by parse_pid.
1382 * gnu-nat.c (gnu_attach): Likewise.
1383 * nto-procfs.c (procfs_attach): Likewise.
1384 * procfs.c (procfs_attach): Likewise.
1385 * windows-nat.c (windows_attach): Likewise.
1386 * inf-ptrace.c (inf_ptrace_attach): Likewise. Remove variable dummy.
1387 * inf-ttrace.c (inf_ttrace_attach): Likewise.
1388 * remote.c (extended_remote_attach_1): Likewise. New comment on getpid
1391 2010-02-14 Masaki Muranaka <monaka@monami-software.com>
1393 * MAINTAINERS: Add myself for write after approval privileges.
1395 2010-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1397 * solib-svr4.c: (LM_ADDR_CHECK): Move variable align to a more inner
1400 2010-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1402 * solib-svr4.c: (LM_ADDR_CHECK): Print successful prelink adjustment
1403 only if INFO_VERBOSE.
1405 2010-02-12 Tomas Holmberg <th@virtutech.com>
1407 * mi/mi-main.c: Added the --reverse flag to the following MI
1408 commands: exec-continue, exec-finish, exec-next, exec-step,
1409 exec-next-instruction, exec-step-instruction. This is to
1410 support reverse execution over the MI interface to gdb.
1412 2010-02-12 Pedro Alves <pedro@codesourcery.com>
1414 * tracepoint.c (_initialize_tracepoint): Specify that the address
1415 range of `tfind outsize' is exclusive, and that the address range
1416 of `tfind range' is inclusive, in the commands' help strings.
1418 2010-02-12 Joel Brobecker <brobecker@adacore.com>
1420 Spurious "dll not found" error messages on x64-windows.
1421 * windows-nat.c: Add include of complaints.h.
1422 (handle_unload_dll): Change dll-not-found error into a complaint.
1424 2010-02-12 Pedro Alves <pedro@codesourcery.com>
1426 * breakpoint.c (allocate_bp_location): Use bp_loc_other for
1427 bp_tracepoint and bp_fast_tracepoint, not
1428 bp_loc_software_breakpoint.
1429 (update_global_location_list): Tracepoints are never duplicates of
1432 2010-02-12 Pedro Alves <pedro@codesourcery.com>
1434 * breakpoint.c (break_command_really): Change return type to int.
1435 Return false if no breakpoint was created, true otherwise.
1436 (trace_command): Don't set the tracepoint count if no tracepoint
1438 (ftrace_command): Ditto.
1439 (create_tracepoint_from_upload): Bail out if the tracepoint wasn't
1440 created in the breakpoints table.
1442 2010-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1443 Ulrich Weigand <uweigand@de.ibm.com>
1445 * solib-svr4.c (LM_ADDR_CHECK): New comment on PPC-aware condition.
1447 2010-02-11 Pedro Alves <pedro@codesourcery.com>
1449 * ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out if
1450 the offset value isn't of integral type.
1452 2010-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1454 * breakpoint.c (delete_breakpoint) <bpt->related_breakpoint != NULL>:
1457 2010-02-11 Pedro Alves <pedro@codesourcery.com>
1459 * ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out on
1460 non-subscriptable types.
1461 * valarith.c (binop_types_user_defined_p): New, abstracted out
1463 (binop_user_defined_p): ... this.
1464 * value.h (binop_types_user_defined_p): Declare.
1466 2010-02-11 Pedro Alves <pedro@codesourcery.com>
1468 * tracepoint.c (tfile_open): Remove spurious discard_cleanups.
1469 Merge uploaded TSVs before merging uploaded tracepoints.
1471 2010-02-11 Pedro Alves <pedro@codesourcery.com>
1473 * ax-gdb.c (gen_deref): Don't allow dereferencing void pointers.
1475 2010-02-11 Vladimir Prus <vladimir@codesourcery.com>
1477 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Add extra
1478 whitespace character after a dot in comment.
1479 (mi_cmd_stack_list_arguments, mi_cmd_stack_list_variables):
1481 (list_args_or_locals): For the 'all' (that is
1482 -stack-list-variables) case, always output list of tuples.
1483 Output 'arg' field if variable is argument.
1485 2010-02-10 Tom Tromey <tromey@redhat.com>
1487 * parser-defs.h (parser_debug): Declare.
1488 * parse.c (_initialize_parse): Install "debug parser" set/show
1490 (parser_debug): New global.
1491 (show_parserdebug): New function.
1492 * c-exp.y (c_parse): Set yydebug.
1494 2010-02-10 H.J. Lu <hongjiu.lu@intel.com>
1496 * target-descriptions.c (tdesc_type): Add TDESC_TYPE_I387_EXT,
1497 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
1498 (tdesc_predefined_types): Add i387_ext, i386_eflags and
1500 (tdesc_find_type): New.
1501 (tdesc_gdb_type): Use tdesc_find_type. Handle TDESC_TYPE_I387_EXT,
1502 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
1504 * target-descriptions.h (tdesc_find_type): New.
1506 2010-02-10 Michael Snyder <msnyder@vmware.com>
1508 * gdb-gdb.py: Comment fix.
1510 2010-02-09 Tristan Gingold <gingold@adacore.com>
1512 * machoread.c (macho_symfile_relocate): New function.
1513 (macho_sym_fns): Use macho_symfile_relocate instead of
1514 default_symfile_relocate.
1515 (macho_oso_data): New type.
1516 (current_oso): New variable.
1517 (macho_add_oso_symfile): Do not compute section_addr_info, but
1518 instead set vma of sections.
1519 Do not set SYMFILE_VERBOSE to call symbol_file_add_from_bfd.
1520 Set and clear current_oso.
1522 2010-02-09 Joel Brobecker <brobecker@adacore.com>
1524 Wrong type description for tagged type parameter.
1525 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: When noside is
1526 EVAL_AVOID_SIDE_EFFECTS, also handle the case when type is a
1527 reference to a tagged type.
1529 2010-02-09 Tristan Gingold <gingold@adacore.com>
1531 * objfiles.c (objfile_separate_debug_iterate): Do not iterate on
1532 brothers of the parent.
1534 2010-02-08 Tom Tromey <tromey@redhat.com>
1538 * valops.c (search_struct_field): Make 'name' const.
1539 (search_struct_method): Likewise.
1540 (find_method_list): Make 'method' const.
1541 (value_struct_elt): Make 'name' and 'err' const.
1542 (value_find_oload_method_list): Make 'method' const.
1543 (find_overload_match): Make 'name' const.
1544 * eval.c (evaluate_subexp_standard): New locals function,
1546 <OP_FUNCALL>: Handle OP_SCOPE specially.
1548 2010-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1550 * infrun.c (handle_inferior_event): Do not look up regcache
1551 for exited processes.
1553 Mon Feb 8 13:17:10 2010 Chris Moller <moller@mollerware.com>
1556 * valarith.c (value_ptrdiff): Added a test for a zero type length,
1557 warn if found, and assume length = 1.
1559 2010-02-08 Chris Moller <cmoller@redhat.com>
1562 * cp-valprint.c (cp_print_value_fields) Fix use of obstacks.
1563 cp_print_static_field) Fix use of obstacks.
1565 2010-02-08 Pedro Alves <pedro@codesourcery.com>
1567 * linux-nat.c (linux_nat_resume): In non-stop, also only tag
1568 resumed LWPs as resumed.
1569 (linux_nat_wait_1): If there's no resumed LWP in the set of LWPs
1570 we're waiting for, bail out with TARGET_WAITKIND_IGNORE, instead
1571 of throwing an internal error. If an LWP of a process we're not
1572 waiting for reports a signal, don't force collecting a SIGSTOP,
1573 and if it was breakpoint hit in non-stop mode, cancel it. Don't
1574 go through all LWPs cancelling breakpoints in non-stop mode.
1575 (resume_stopped_resumed_lwps): New.
1576 (linux_nat_wait): Use it.
1578 2010-02-07 H.J. Lu <hongjiu.lu@intel.com>
1580 * features/Makefile (WHICH): Add i386/i386, i386/i386-linux,
1581 i386/amd64 and i386/amd64-linux.
1582 (i386/i386-expedite): New.
1583 (i386/i386-linux-expedite): Likewise.
1584 (i386/amd64-expedite):Likewise.
1585 (i386/amd64-linux-expedite): Likewise.
1586 ($(outdir)/i386/i386-linux.dat): Likewise.
1587 ($(outdir)/i386/amd64.dat): Likewise.
1588 ($(outdir)/i386/amd64-linux.dat): Likewise.
1590 * features/i386/32bit-core.xml: New.
1591 * features/i386/32bit-linux.xml: Likewise.
1592 * features/i386/32bit-sse.xml: Likewise.
1593 * features/i386/64bit-core.xml: Likewise.
1594 * features/i386/64bit-linux.xml: Likewise.
1595 * features/i386/64bit-sse.xml: Likewise.
1596 * features/i386/i386-linux.xml: Likewise.
1597 * features/i386/i386.xml: Likewise.
1598 * features/i386/amd64-linux.xml: Likewise.
1599 * features/i386/amd64.xml: Likewise.
1600 * features/i386/i386-linux.c: Likewise.
1601 * features/i386/i386.c: Likewise.
1602 * features/i386/amd64-linux.c: Likewise.
1603 * features/i386/amd64.c: Likewise.
1605 2010-02-05 Sami Wagiaalla <swagiaal@redhat.com>
1608 * cp-support.h: Added char* alias element to using_direct data
1610 (cp_add_using): Added char* alias argument.
1611 (cp_add_using_directive): Ditto.
1612 * cp-namespace.c: Updated with the above changes.
1613 (cp_lookup_symbol_imports): Check for aliases.
1614 * dwarf2read.c (read_import_statement): Figure out local alias
1615 for the import and pass it on to cp_add_using.
1616 (read_namespace): Pass alias argument to cp_add_using.
1618 2010-02-05 Hui Zhu <teawater@gmail.com>
1620 * defs.h (gdb_bfd_errmsg): New extern.
1621 * exec.c (exec_file_attach): Change bfd_errmsg to
1623 * utils.c (AMBIGUOUS_MESS1): New macro.
1624 (AMBIGUOUS_MESS2): New macro.
1625 (gdb_bfd_errmsg): New function.
1627 2010-02-04 Doug Evans <dje@google.com>
1629 * solib-svr4.c (enable_break): Add comment.
1631 2010-02-04 Anthony Green <green@moxielogic.com>
1633 * moxie-tdep.c (moxie_analyze_prologue): Fail protocol analysis
1636 2010-02-04 Tom Tromey <tromey@redhat.com>
1638 * valops.c (search_struct_field): Account for
1639 value_embedded_offset. Fix check for virtual base past the end of
1640 the object. Use value_copy when making a slice of the value.
1642 2010-02-04 H.J. Lu <hongjiu.lu@intel.com>
1645 * tui/tui-interp.c (tui_init): Call tui_initialize_readline
1646 only if gdb_stdout is a tty.
1648 2010-02-04 H.J. Lu <hongjiu.lu@intel.com>
1650 * target-descriptions.c: Include "osabi.h".
1651 (maint_print_c_tdesc_cmd): Generate set_tdesc_osabi for valid
1654 2010-02-04 Tristan Gingold <gingold@adacore.com>
1656 * machoread.c (macho_add_oso): Renamed to macho_register_oso.
1657 (macho_symtab_read): Adjust calls to macho_add_oso.
1658 (macho_oso_symfile): Renamed to macho_symfile_read_all_oso.
1659 (macho_symfile_read): Adjust call to macho_oso_symfile.
1660 (macho_new_init): Move this function after declarations.
1661 (macho_symfile_init): Ditto.
1662 * darwin-nat-info.c (darwin_lib_gdb_ports): Remove.
1663 * darwin-nat.c (darwin_lookup_task): Remove unused prototype.
1665 2010-02-04 Vladimir Prus <vladimir@codesourcery.com>
1667 Include MI command in remotelog.
1669 * mi/mi-main.c (mi_execute_command): Call target_log_command.
1671 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
1673 * remote.c (remote_state): Remove gdbarch.
1674 (init_remote_state): Don't set gdbarch.
1675 (remote_query_supported): Pass target_gdbarch instead of
1676 rs->gdbarch to gdbarch_qsupported.
1678 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
1680 * gdbarch.sh: Add qsupported.
1682 * gdbarch.c: Regenerated.
1683 * gdbarch.h: Likewise.
1685 * remote.c (remote_state): Add gdbarch.
1686 (init_remote_state): Set gdbarch.
1687 (remote_query_supported): Support gdbarch_qsupported.
1689 2010-02-03 Daniel Jacobowitz <dan@codesourcery.com>
1691 * amd64fbsd-nat.c (amd64fbsd_supply_pcb): Also check for
1692 __FreeBSD_kernel_version.
1694 2010-02-03 Tristan Gingold <gingold@adacore.com>
1696 * symfile.h (struct sym_fns): Add sym_relocate field.
1697 (default_symfile_relocate): New prototype.
1698 (symfile_relocate_debug_section): First argument is now an objfile.
1699 * symfile.c (default_symfile_relocate): Rename from
1700 symfile_relocate_debug_section, first argument is now an objfile.
1701 (symfile_relocate_debug_section): New function.
1702 * coffread.c (coff_sym_fns): Set sym_relocate field.
1703 * somread.c (som_sym_fns): Ditto.
1704 * mipsread.c (ecoff_sym_fns): Ditto.
1705 * machoread.c (macho_sym_fns): Ditto.
1706 * elfread.c (elf_sym_fns): Ditto.
1707 * dwarf2read.c (dwarf2_read_section): Ditto.
1708 * xcoffread.c (xcoff_sym_fns): Ditto.
1709 * dbxread.c (aout_sym_fns): Ditto.
1710 (dbx_psymtab_to_symtab): Adjust call to symfile_relocate_debug_section.
1711 (elfstab_build_psymtabs): Ditto.
1713 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
1715 * defs.h (MAX_REGISTER_SIZE): Increase to 32.
1717 2010-02-02 Tom Tromey <tromey@redhat.com>
1719 * valops.c (value_cast_structs): Try downcasting using the RTTI
1722 2010-02-02 Tom Tromey <tromey@redhat.com>
1724 * gnu-v2-abi.c: Don't include gnu-v2-abi.h.
1725 (gnuv2_baseclass_offset): Now static.
1726 * Makefile.in (HFILES_NO_SRCDIR): Remove gnu-v2-abi.h.
1727 * gnu-v2-abi.h: Remove.
1729 2010-02-02 Tom Tromey <tromey@redhat.com>
1731 * m2-typeprint.c (m2_record_fields): Don't use
1733 * gdbtypes.h (TYPE_DECLARED_CLASS): New macro.
1734 (struct main_type) <flag_declared_class>: New field.
1735 (struct cplus_struct_type) <declared_type>: Remove.
1736 <ntemplate_args>: Move earlier.
1737 (DECLARED_TYPE_CLASS, DECLARED_TYPE_UNION, DECLARED_TYPE_STRUCT)
1738 (DECLARED_TYPE_TEMPLATE): Remove.
1739 (TYPE_DECLARED_TYPE): Remove.
1740 * gdbtypes.c (lookup_union): Don't use TYPE_DECLARED_TYPE.
1741 * dwarf2read.c (read_structure_type): Set TYPE_DECLARED_CLASS.
1742 * c-typeprint.c (c_type_print_base): Use TYPE_DECLARED_CLASS, not
1745 2010-02-02 Tom Tromey <tromey@redhat.com>
1747 PR c++/11226, PR c++/9629, PR c++/9688, PR c++/8890:
1748 * valops.c (search_struct_field): Compute nbases after calling
1750 (check_field): Call CHECK_TYPEDEF.
1751 * cp-valprint.c (cp_print_value): Pass correct address to
1752 baseclass_offset. Fix check for virtual base past the end of the
1753 object. Don't offset address passed to cp_print_value_fields or
1754 apply_val_pretty_printer.
1755 (cp_print_value_fields): Fix call to val_print.
1756 (cp_print_value_fields_rtti): New function.
1757 * c-valprint.c (c_val_print): Use cp_print_value_fields_rtti.
1758 * p-valprint.c (pascal_object_print_value_fields): Fix call to
1760 * python/py-prettyprint.c (apply_val_pretty_printer): Add embedded
1762 * language.h (struct language_defn) <la_val_print>: Document.
1763 * c-lang.h (cp_print_value_fields_rtti): Declare.
1765 2010-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1768 * linux-low.c (linux_tracefork_child) [!(__UCLIBC__ && HAS_NOMMU)]: New.
1769 (linux_test_for_tracefork): Move `stack' into [__UCLIBC__ && HAS_NOMMU].
1770 (linux_test_for_tracefork) [!(__UCLIBC__ && HAS_NOMMU)]: New.
1772 2010-02-01 Michael Matz <matz@suse.de>
1773 Daniel Jacobowitz <dan@codesourcery.com>
1775 * i386-tdep.c (i386_frame_cache): Assume valid anonymous
1776 functions use a frame pointer.
1778 2010-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1780 * solib-svr4.c (scan_dyntag): New variable dyn_addr. Replace gdb_assert
1781 by a conditional setting DYN_ADDR. Use DYN_ADDR.
1782 * config/djgpp/fnchange.lst: Add translations for
1783 symbol-without-target_section.exp and symbol-without-target_section.c.
1785 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
1787 * gdbarch.sh: Set LANG and LC_ALL to C, not c.
1788 (remote_breakpoint_for_pc): Correct invalid_p check.
1789 * gdbarch.c: Regenerated.
1791 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
1793 * arm-tdep.c (arm_find_mapping_symbol): New function, from
1795 (arm_pc_is_thumb): Use arm_find_mapping_symbol.
1796 (extend_buffer_earlier): New function.
1797 (MAX_IT_BLOCK_PREFIX, IT_SCAN_THRESHOLD): New constants.
1798 (arm_adjust_breakpoint_address): New function.
1799 (arm_gdbarch_init): Register arm_adjust_breakpoint_address.
1801 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
1803 * arm-linux-tdep.c (arm_linux_thumb2_be_breakpoint)
1804 (arm_linux_thumb2_le_breakpoint): New constants.
1805 (arm_linux_init_abi): Set thumb2_breakpoint and
1806 thumb2_breakpoint_size.
1807 * arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions.
1808 (thumb_get_next_pc): Add a comment. Rename IT to ITSTATE.
1809 Implement support for single stepping through IT blocks if
1810 a 32-bit Thumb breakpoint instruction is available.
1811 (arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction
1812 is available, use it when needed.
1813 (arm_remote_breakpoint_from_pc): New function.
1814 (arm_gdbarch_init): Register arm_remote_breakpoint_from_pc.
1815 * arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint
1816 comment. Add thumb2_breakpoint and thumb2_breakpoint_size.
1818 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
1820 * arch-utils.c (default_remote_breakpoint_from_pc): New function.
1821 * arch-utils.h (default_remote_breakpoint_from_pc): Declare.
1822 * gdbarch.c, gdbarch.h: Regenerated.
1823 * gdbarch.sh (remote_breakpoint_from_pc): New architecture method.
1824 * remote.c (remote_insert_breakpoint, remote_insert_hw_breakpoint): Use
1825 gdbarch_remote_breakpoint_from_pc.
1827 2010-01-29 Daniel Jacobowitz <dan@codesourcery.com>
1829 * infrun.c (prepare_to_proceed): Handle other signals which might
1831 (handle_inferior_event): Move the check for unusual breakpoint
1834 2010-01-29 Paul Hilfinger <hilfinger@adacore.com>
1836 amd64 - function returning record with field straddling 2 registers.
1837 * amd64-tdep.c (amd_classify_aggregate): Handle the case of
1838 a record of length <= 16 in which a field straddles the two
1841 2010-01-29 Joel Brobecker <brobecker@adacore.com>
1843 Implement return values on amd64-windows.
1844 * amd64-windows-tdep.c: #include gdbcore.h and regcache.h.
1845 (amd64_windows_return_value): New function.
1846 (amd64_windows_init_abi): Call set_gdbarch_return_value with
1847 amd64_windows_return_value.
1849 2010-01-29 Joel Brobecker <brobecker@adacore.com>
1851 amd64-windows: 32 bytes allocated on stack by caller for integer
1852 parameter registers.
1853 * i386-tdep.h (struct gdbarch_tdep): Add new field
1854 integer_param_regs_saved_in_caller_frame.
1855 * amd64-windows-tdep.c (amd64_windows_init_abi): Set
1856 tdep->integer_param_regs_saved_in_caller_frame to 1.
1857 * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
1858 stack if tdep->integer_param_regs_saved_in_caller_frame is set.
1860 2010-01-29 Joel Brobecker <brobecker@adacore.com>
1862 amd64-windows: memory args passed by pointer during function calls.
1863 * i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
1864 * amd64-tdep.c (amd64_push_arguments): Add handling of architectures
1865 where tdep->memory_args_by_pointer is non-zero.
1866 * amd64-windows-tdep.c (amd64_windows_init_abi): Set
1867 tdep->memory_args_by_pointer to 1.
1869 2010-01-29 Joel Brobecker <brobecker@adacore.com>
1871 amd64-windows: Integer parameters in function calls.
1872 * i386-tdep.h (enum amd64_reg_class): New, moved here from
1874 (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
1875 call_dummy_integer_regs, and classify.
1876 * amd64-tdep.h (amd64_classify): Add declaration.
1877 * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
1878 (amd64_reg_class): Delete, moved to i386-tdep.h.
1879 (amd64_classify): Make non-static. Move declaration to amd64-tdep.h.
1880 Replace call to amd64_classify by call to tdep->classify.
1881 (amd64_push_arguments): Get the list of registers to use for
1882 passing integer parameters from the gdbarch tdep structure,
1883 rather than using a hardcoded one. Replace calls to amd64_classify
1884 by calls to tdep->classify.
1885 (amd64_push_dummy_call): Get the register number used for
1886 the "hidden" argument from tdep->call_dummy_integer_regs.
1887 (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
1888 and tdep->call_dummy_integer_regs. Set tdep->classify.
1889 * amd64-windows-tdep.c: Add include of gdbtypes.h.
1890 (amd64_windows_dummy_call_integer_regs): New static global.
1891 (amd64_windows_classify): New function.
1892 (amd64_windows_init_abi): Initialize tdep->call_dummy_num_integer_regs
1893 tdep->call_dummy_integer_regs and tdep->classify.
1895 2010-01-28 Daniel Jacobowitz <dan@codesourcery.com>
1897 * regcache.c (regcache_xmalloc): Add aspace argument. Use it
1898 for the new regcache. All callers updated.
1899 (regcache_cpy, regcache_cpy_no_passthrough): Do not set aspace here.
1900 (get_thread_arch_regcache): Do not set aspace here.
1901 * regcache.h (regcache_xmalloc): Update declaration.
1903 * frame.c, infcall.c, ppc-linux-tdep.c: Calls to
1904 regcache_xmalloc updated.
1906 2010-01-28 Joel Brobecker <brobecker@adacore.com>
1908 Another -Wunused-function error in procfs.c (sparc-solaris)
1909 * procfs.c (insert_dbx_link_breakpoint): Delete declaration. Move up.
1910 Only define if SYS_syssgi is defined.
1911 (remove_dbx_link_breakpoint): Delete declaration. Move up.
1912 (dbx_link_addr, insert_dbx_link_bpt_in_file)
1913 (insert_dbx_link_bpt_in_region): Move up. Only define if SYS_syssgi
1916 2010-01-27 Christopher Faylor <me+cygwin@cgf.cx>
1918 * windows-nat.c (windows_initialization_done): New variable.
1919 (get_windows_debug_event): Issue error when process dies before
1920 completely initializing.
1921 (do_initial_windows_stuff): Set flag to indicate when we are done with
1922 the initial steps of attaching to the child.
1924 2010-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1926 * symtab.h (struct symbol <symtab>): New comment on NULL values.
1928 2010-01-27 Doug Evans <dje@google.com>
1930 * solib-svr4.c (solib_break_names): Add __dl_rtld_db_dlactivity.
1932 * breakpoint.c (bpstat_stop_status): Delete useless code.
1934 2010-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1936 * printcmd.c (display_uses_solib_p): Remove variable section. Access
1937 objfile via SYMBOL_SYMTAB.
1939 2010-01-26 Tom Tromey <tromey@redhat.com>
1942 * eval.c (evaluate_subexp_for_address) <UNOP_IND>: Call
1943 coerce_array on result.
1945 2010-01-26 Sami Wagiaalla <swagiaal@redhat.com>
1947 * cp-namespace.c (cp_lookup_symbol_namespace): Added
1948 search_parent argument.
1949 (cp_add_using): Initialize 'searched' field.
1950 (reset_directive_searched): New function.
1951 * cp-support.h: Add 'searched' field to using_direct struct.
1952 (cp_lookup_symbol_imports): Ditto.
1953 * cp-namespace.c (cp_lookup_symbol_imports): Ditto.
1954 Perform recursive search.
1955 Implement non parent search.
1956 * valops.c (value_maybe_namespace_elt): Updated.
1958 2010-01-26 Sami Wagiaalla <swagiaal@redhat.com>
1961 * dwarf2read.c (read_lexical_block_scope): Create blocks for
1962 scopes which contain using directives even if they contain no
1964 * symtab.c (lookup_symbol_aux): Pass lowest level block to
1965 la_lookup_symbol_nonlocal.
1966 * cp-namespace.c (cp_lookup_symbol_nonlocal): call
1967 cp_lookup_symbol_namespace.
1968 (cp_lookup_symbol_namespace): Perform an import lookup at every
1970 (cp_lookup_symbol_imports): New function.
1971 (cp_lookup_symbol_in_namespace): New function.
1973 2010-01-25 Tom Tromey <tromey@redhat.com>
1976 * c-valprint.c (c_val_print): Fix test of extract_unsigned_integer
1979 2010-01-25 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
1981 * configure.ac: Only use host_os part when disabling TUI on osf.
1982 Use test to check variables, prefix strings with x.
1983 * configure: Regenerate.
1985 * solib-osf.c (osf_current_sos): Initialize tail.
1987 2010-01-25 gingold <gingold@adacore.com>
1989 * windows-nat.c (windows_continue): Use %x to print thread id.
1990 (get_windows_debug_event): Ditto.
1992 2010-01-22 Tom Tromey <tromey@redhat.com>
1995 * dwarf2read.c (quirk_gcc_member_function_pointer): Change return
1996 type and arguments. Use smash_to_methodptr_type.
1997 (read_structure_type): Call quirk_gcc_member_function_pointer
1999 * gdbtypes.h (smash_to_methodptr_type): Declare.
2000 * gdbtypes.c (smash_to_methodptr_type): New function.
2001 (lookup_methodptr_type): Use it.
2003 2010-01-21 Tom Tromey <tromey@redhat.com>
2006 * symtab.h (lookup_minimal_symbol_and_objfile): Declare.
2007 * minsyms.c (lookup_minimal_symbol_and_objfile): New function.
2008 * glibc-tdep.c (find_minsym_and_objfile): Remove.
2009 (glibc_skip_solib_resolver): Use
2010 lookup_minimal_symbol_and_objfile.
2012 2010-01-21 Kai Tietz <kai.tietz@onevision.com>
2014 * inflow.c (check_syscall): Guard by #if clause for GO32 and
2017 2010-01-20 Tom Tromey <tromey@redhat.com>
2020 * valarith.c (value_binop): Handle BINOP_GTR, BINOP_LEQ, and
2021 BINOP_GEQ. Handle BINOP_NOTEQUAL in the signed case.
2022 * dwarf2expr.c (new_dwarf_expr_context): Allocate
2023 dwarf_stack_values, not CORE_ADDRs.
2024 (execute_stack_op): Change DW_OP_div and comparison operators to
2025 use signed operands.
2027 2010-01-20 Vladimir Prus <vladimir@codesourcery.com>
2029 Per-inferior args and tty and environment.
2031 * infcmd.c (inferior_args): Rename to ...
2032 (inferior_args_scratch): ... this.
2033 (inferior_io_terminal): Rename to ...
2034 (inferior_io_terminal_scratch): ... this.
2035 (inferior_argc, inferior_argv): Remove.
2036 (set_inferior_io_terminal, get_inferior_io_terminal): Store
2037 inside current_inferior().
2038 (set_inferior_tty_command, show_inferior_tty_command): New.
2039 (get_inferior_args, set_inferior_args): Store inside
2041 (notice_args_set): Likewise and rename to...
2042 (set_args_command): ... this.
2043 (set_inferior_args_vector): Likewise.
2044 (notice_args_read): Rename to...
2045 (show_args_command): ...new.
2046 (tty_command): Remove.
2047 (run_command_1): Don't free old args, as they are freed by
2048 set_inferior_arg now.
2049 (run_no_args_command): Likewise.
2050 (inferior_environ): Remove.
2051 (run_command_1): Use environment of the current inferior.
2052 (environment_info, set_environment_command)
2053 (unset_environment_command, path_info, path_command): Likewise.
2054 (_initialize_infcmd): Adjust for function and variable renames.
2055 Do not init inferior_environ.
2056 * inferior.h (set_inferior_arg): Adjust prototype.
2057 (struct inferior): New fields args, argc, argv, terminal, environment.
2058 (inferior_environ): Remove declaration.
2059 * inferior.c (free_inferior): Free new fields.
2060 (add_inferior_silent): Initialize 'environment' field.
2061 * main.c (captured_main): Set arguments only after the initial
2062 inferior has been created. Set set_inferior_io_terminal,
2064 * mi/mi-main.c (mi_cmd_env_path): Use environment of the current
2066 (_initialize_mi_cmd_env): Adjust for disappearance of global
2068 * solib.c (solib_find): Use environment of the current inferior.
2070 2010-01-20 Jan Kratochvil <jan.kratochvil@redhat.com>
2072 * varobj.c (varobj_add_child, install_dynamic_child): Wrap into #if
2074 (instantiate_pretty_printer): Move HAVE_PYTHON outside of the function.
2076 2010-01-20 Joel Brobecker <brobecker@adacore.com>
2078 Get rid of ada-lang.c:function_name_from_pc.
2079 * ada-lang.c: Add "stack.h" #include.
2080 (function_name_from_pc): Delete.
2081 (is_known_support_routine): Replace call to function_name_from_pc
2082 by call to find_frame_funname.
2083 (ada_unhandled_exception_name_addr_from_raise): Likewise.
2085 2010-01-19 Tom Tromey <tromey@redhat.com>
2088 * dwarf2read.c (read_partial_die): Allocate partial DIE's name on
2091 2010-01-19 Tom Tromey <tromey@redhat.com>
2093 * top.c (stop_sig, float_handler, do_nothing): Remove.
2095 2010-01-19 Jan Kratochvil <jan.kratochvil@redhat.com>
2097 * breakpoint.c (watchpoint_check): Check the call
2098 gdbarch_in_function_epilogue_p before calling frame_find_by_id.
2100 * config/djgpp/fnchange.lst: Add translations for
2101 watchpoint-cond-gone.exp, watchpoint-cond-gone.c and
2102 watchpoint-cond-gone-stripped.c.
2104 2010-01-19 Tom Tromey <tromey@redhat.com>
2107 * dwarf2read.c (partial_die_parent_scope): Put enumeration type
2108 into parent scope, and enumerator into grandparent scope.
2110 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2112 * NEWS: Add entry for "set/show ada trust-PAD-over-XVS" commands.
2114 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2116 * configure.host: Make x86_64-*-solaris2.1[0-9]* an alias of
2117 i[34567]86-*-solaris2.1[0-9]*.
2118 * configure.tgt: Likewise.
2120 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2122 * NEWS: Document the source command enhancement allowing it
2123 to load Python scripts. Document the "set/show script-extension"
2126 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2128 Add -Wunused-function to compile flags.
2129 * configure.ac: Add -Wunused-function to build_warnings.
2130 * configure: Regenerate.
2132 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2134 "delete" ada-lex.c:input function, not used.
2135 * ada-lex.l: #define YY_NO_INPUT.
2137 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2139 Delete free_named_symtabs and associated cleanup.
2140 * symfile.h (free_named_symtabs): Delete declaration.
2141 * symfile.c: Remove some commented out code (clear_symtab_users_once).
2142 (cashier_psymtab): Comment function out.
2144 (free_named_symtabs): Delete.
2145 * coffread.c (coff_end_symtab): Remove call to free_named_symtabs.
2146 * dbxread.c (end_psymtab): Likewise.
2147 * dwarf2read.c (process_psymtab_comp_unit): Ditto.
2148 * exec.c (exec_close_1): Ditto.
2149 * xcoffread.c (xcoff_end_psymtab): Likewise.
2151 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2153 * stack.c (print_block_frame_labels): Comment function out.
2155 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2157 Delete unused or undefined functions.
2158 * breakpoint.c (ep_parse_optional_filename): Delete.
2159 * dcache.c (dcache_write_line): Remove declaration.
2160 * infrun.c (build_infrun): Remove declaration.
2161 * tracepoint.c (tracepoint_save_command): Remove declaration.
2162 * linux-nat.c (init_lwp_list): Delete. No longer used.
2163 * event-loop.c (check_async_signal_handlers): Delete declaration.
2164 * infrun.c (init_execution_control_state): Delete.
2165 (proceed): Update comment to avoid mentioning
2166 init_execution_control_state.
2167 * target.c (kill_or_be_killed, nosupport_runtime): Delete.
2168 * ada-lang.c (ada_to_static_fixed_value): Delete.
2169 * scm-lang.c (evaluate_subexp_scm): Delete declaration.
2170 * cp-namespace.c (cp_copy_usings): Delete.
2171 * xml-syscall.c (xml_number_of_syscalls): Delete.
2172 * progspace.c (find_program_space_by_num): Delete.
2173 * inflow.c (handle_sigio): Delete declaration.
2174 * hppa-tdep.c (hppa_alignof): Delete.
2175 * mipsnbsd-tdep.c (mipsnbsd_sigtramp_offset)
2176 (mipsnbsd_core_osabi_sniffer): Delete.
2178 2010-01-18 Tom Tromey <tromey@redhat.com>
2181 * c-exp.y (REINTERPRET_CAST, DYNAMIC_CAST, STATIC_CAST)
2182 (CONST_CAST): New tokens.
2183 (exp): Add new productions.
2184 (ident_tokens): Add const_cast, dynamic_cast, static_cast, and
2186 (is_cast_operator): New function.
2187 (yylex): Handle cast operators specially.
2188 * eval.c (evaluate_subexp_standard) <UNOP_DYNAMIC_CAST,
2189 UNOP_REINTERPRET_CAST>: New cases.
2190 * expprint.c (print_subexp_standard): Likewise.
2191 (op_name_standard): Likewise.
2192 (dump_subexp_body_standard): Likewise.
2193 * parse.c (operator_length_standard): Likewise.
2194 * expression.h (enum exp_opcode): New constants UNOP_DYNAMIC_CAST,
2195 UNOP_REINTERPRET_CAST.
2196 * gdbtypes.c (class_types_same_p): New function.
2197 (is_ancestor): Use it.
2198 (is_public_ancestor): New function.
2199 (is_unique_ancestor_worker): Likewise.
2200 (is_unique_ancestor): Likewise.
2201 * gdbtypes.h (class_types_same_p, is_public_ancestor)
2202 (is_unique_ancestor): Declare.
2203 * valops.c (value_reinterpret_cast): New function.
2204 (dynamic_cast_check_1): Likewise.
2205 (dynamic_cast_check_2): Likewise.
2206 (value_dynamic_cast): Likewise.
2207 * value.h (value_reinterpret_cast, value_dynamic_cast): Declare.
2209 2010-01-18 Joel Brobecker <brobecker@adacore.com>
2211 Fix build failure when building without Python support.
2212 * python/python.c: Always include exceptions.h, even when HAVE_PYTHON
2215 2010-01-18 Joel Brobecker <brobecker@adacore.com>
2217 Use XVS field type instead of doing a parallel lookup.
2218 * ada-lang.c (ada_get_base_type): Follow the XVS field type
2219 if it is a reference type instead of doing a type lookup using
2222 2010-01-18 Joel Brobecker <brobecker@adacore.com>
2224 Trust PAD types instead of using PAD___XVS.
2225 * ada-lang.c (trust_pad_over_xvs): New static variable.
2226 (ada_is_aligner_type): If !trust_pad_over_xvs and there is a
2227 parallel XVS type, follow the XVS type instead of the PAD type.
2228 (unwrap_value): Make sure that there is no parallel XVE type
2229 before returning the value as is.
2230 (set_ada_list, show_ada_list): New static variables.
2231 (set_ada_command, show_ada_command): New functions.
2232 (_initialize_ada_language): Add new "set/show ada" prefix commands.
2233 Add new "set/show ada trust-PAD-over-XVS" setting.
2235 2010-01-18 Tom Tromey <tromey@redhat.com>
2236 Thiago Jung Bauermann <bauerman@br.ibm.com>
2238 Allow "source" to load python scripts.
2239 * exceptions.h (enum errors): Add UNSUPPORTED_ERROR.
2240 * python/python.c (source_python_script): New function.
2241 * python/python.h (source_python_script): Add declaration.
2242 * cli/cli-cmds.c: #include exceptions.h and python/python.h.
2243 (script_ext_off, script_ext_soft, script_ext_strict)
2244 (script_ext_enums, script_ext_mode): New static constants.
2245 (show_script_ext_mode, find_and_open_script): New functions.
2246 (source_script): Enhance to handle Python scripts.
2247 (init_cli_cmds): Add set/show script-extension commands.
2249 2010-01-16 Stan Shebs <stan@codesourcery.com>
2251 * tracepoint.h (struct trace_status): Use unsigned long long
2253 * tracepoint.c (trace_status_command): Fix printf directive.
2254 (trace_save_command): Check fwrite returns, fix printf directive.
2255 (trace_filename): New global.
2256 (tfile_open): Set it, check read returns.
2257 (tfile_close): Free trace_filename.
2258 (tfile_get_traceframe_address): Check read returns.
2259 (tfile_trace_find): Ditto.
2260 (tfile_fetch_registers): Ditto.
2261 (tfile_xfer_partial): Ditto.
2262 (tfile_get_trace_state_variable_value): Ditto.
2264 2010-01-15 Stan Shebs <stan@codesourcery.com>
2266 Add trace file support.
2267 * tracepoint.h (enum trace_stop_reason): New enum.
2268 (struct trace_status): New struct.
2269 (parse_trace_status): Declare.
2270 (struct uploaded_tp): Move here from remote.c,
2271 add fields for actions.
2272 (struct uploaded_tsv): New struct.
2273 * tracepoint.c (tfile_ops): New target vector.
2274 (trace_fd): New global.
2275 (tfile_open): New function.
2276 (tfile_close): New function.
2277 (tfile_files_info): New function.
2278 (tfile_get_trace_status): New function.
2279 (tfile_get_traceframe_address): New function.
2280 (tfile_trace_find): New function.
2281 (tfile_fetch_registers): New function.
2282 (tfile_xfer_partial): New function.
2283 (tfile_get_trace_state_variable_value): New function.
2284 (init_tfile_ops): New function.
2285 (_initialize_tracepoint): Call it, add tfile target.
2286 (trace_status): New global.
2287 (current_trace_status): New function.
2288 (trace_running_p): Remove, change all users to get from
2289 current_trace_status()->running.
2290 (get_trace_status): Remove.
2291 (trace_status_command): Call target_get_trace_status directly,
2292 report more detail including tracing stop reasons.
2293 (trace_find_command): Always allow tfind on a file.
2294 (trace_find_pc_command): Ditto.
2295 (trace_find_tracepoint_command): Ditto.
2296 (trace_find_line_command): Ditto.
2297 (trace_find_range_command): Ditto.
2298 (trace_find_outside_command): Ditto.
2299 (trace_frames_offset, cur_offset): Declare as off_t.
2300 (trace_regblock_size): Rename from reg_size, update users.
2301 (parse_trace_status): New function.
2302 (tfile_interp_line): New function.
2303 (disconnect_or_stop_tracing): Ensure current trace
2304 status before asking what to do.
2305 (stop_reason_names): New global.
2306 (trace_save_command): New command.
2307 (get_uploaded_tp): Move here from remote.c.
2308 (find_matching_tracepoint): Ditto.
2309 (merge_uploaded_tracepoints): New function.
2310 (parse_trace_status): Use stop_reason_names.
2311 (_initialize_tracepoint): Define tsave command.
2312 * target.h (target_ops): New fields to_save_trace_data,
2313 to_upload_tracepoints, to_upload_trace_state_variables,
2314 to_get_raw_trace_data, change to_get_trace_status
2315 to take a pointer to a status struct.
2316 (target_save_trace_data): New macro.
2317 (target_upload_tracepoints): New macro.
2318 (target_upload_trace_state_variables): New macro.
2319 (target_get_raw_trace_data): New macro.
2320 * target.c (update_current_target): Add new methods, change
2321 signature of to_get_trace_status.
2322 * remote.c (hex2bin): Make globally visible.
2324 (remote_download_trace_state_variable): Download name also.
2325 (remote_get_trace_status): Update parameter, use
2327 (remote_save_trace_data): New function.
2328 (remote_upload_tracepoints): New function.
2329 (remote_upload_trace_state_variables): New function.
2330 (remote_get_raw_trace_data): New function.
2331 (remote_start_remote): Use them.
2332 (_initialize_remote_ops): Add operations.
2333 * ax-gdb.c: Include breakpoint.h.
2334 * breakpoint.c (create_tracepoint_from_upload): Use
2335 break_command_really, return tracepoint, warn about unimplemented
2337 * NEWS: Mention trace file addition.
2339 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2341 Fix compilation warning on gcc-3.4.
2342 * exec.c (print_section_info): Move the `displacement' variable
2343 initialization to its declaration.
2345 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2347 * gdb-gdb.py (StructMainTypePrettyPrinter): Fix TYPE_CODE_RANGE
2350 2010-01-15 Eric Botcazou <botcazou@adacore.com>
2352 "info tasks" broken by typedefs in ATCB type definitions.
2353 * ada-lang.c (ada_template_to_fixed_record_type_1): Add call to
2354 ada_check_typedef before retrieving the length of the type for
2357 2010-01-15 Joel Brobecker <brobecker@adacore.com>
2359 Do not use name-based lookup for unconstrained packed arrays.
2360 * ada-lang.c (find_parallel_type_by_descriptive_type):
2361 Limit the fallback to name-based lookups to the case where
2362 the type is a constrained packed array.
2364 2010-01-15 Joel Brobecker <brobecker@adacore.com>
2366 Enhance gdb-gdb.py to handle main_type.type_specific.
2367 * gdb-gdb.py: Print the type-specific part of struct main_type.
2369 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2371 * configure.ac (AC_CHECK_FUNCS): Check for setrlimit and getrlimit.
2372 * configure: Regenerate.
2373 * config.in: Regenerate.
2374 * utils.c: Include sys/resource.h.
2375 (dump_core, can_dump_core): New.
2376 (internal_vproblem): Update the comment. Check can_dump_core while
2377 setting dump_core_p. Replace two abort calls by dump_core calls.
2379 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2380 Eli Zaretskii <eliz@gnu.org>
2382 * NEWS: Document the PIE support.
2384 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2386 * linux-tdep.c: Remove includes gdbcore.h, observer.h and elf-bfd.h.
2387 (check_is_pie_binary, _initialize_linux_tdep): Remove.
2389 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2391 * solib-svr4.c (svr4_exec_displacement): New comment for entry_point.
2392 Replace exec_entry_point call by bfd_get_start_address.
2394 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2396 Support Valgrind attachments broken by the PIE support.
2397 * auxv.c: Include gdbcore.h.
2398 (procfs_xfer_auxv): Make static. Reduce its comment. Drop its
2399 parameters ops, object and annex. Remove their assertions.
2400 (ld_so_xfer_auxv, memory_xfer_auxv): New function.
2401 * auxv.h (procfs_xfer_auxv): Remove comment. Rename to ...
2402 (memory_xfer_auxv): ... here.
2403 * linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to
2405 * procfs.c (procfs_xfer_partial): Likewise.
2406 * solib-svr4.c (svr4_relocate_main_executable): New prototype.
2407 (svr4_special_symbol_handling): Call svr4_relocate_main_executable.
2408 (svr4_solib_create_inferior_hook): Conditionalize the
2409 svr4_relocate_main_executable call.
2411 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2413 * solib-svr4.c (scan_dyntag): Remove variable dyn_addr. New variable
2414 target_section. Find SECT in current_target_sections, gdb_assert it.
2415 (elf_lookup_lib_symbol): Pass the binary file if given symfile_objfile.
2417 * symtab.c (lookup_objfile_from_block): Return the binary file instead
2418 of separate debug info file.
2420 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2422 Support PIEs with no symfile_objfile.
2423 * exec.c (print_section_info <abfd == exec_bfd>): Relocate Entry point.
2424 * solib-svr4.c (svr4_relocate_main_executable <exec_bfd>): New block.
2426 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2428 * solib-svr4.c (svr4_relocate_main_executable): Move the static exec
2430 (svr4_static_exec_displacement): ... a new function.
2431 (svr4_exec_displacement): New function.
2432 (svr4_relocate_main_executable): Call svr4_exec_displacement. Allocate
2433 new_offsets using alloca now. Remove variable old_chain and changed.
2434 Call objfile_relocate unconditionally now.
2436 2010-01-14 Doug Evans <dje@google.com>
2438 * gdbtypes.c (arch_flags_type): Fix comment.
2439 * gdbtypes.h (arch_composite_type): Fix comment.
2441 2009-01-14 Tristan Gingold <gingold@adacore.com>
2443 * machoread.c (macho_add_oso_symfile): Add symfile_flags parameter.
2444 Call xstrdup for abfd->filename. Pass symfile_flags and objfile flags
2445 to symbol_file_add_from_bfd. Add OSO as separate objfile.
2446 (macho_oso_symfile): Add symfile_flags parameter. Pass it to
2447 macho_add_oso_symfile.
2448 (macho_symfile_read): Pass symfile_flags to macho_oso_symfile.
2450 2010-01-14 Joel Brobecker <brobecker@adacore.com>
2452 Tru64: Dead threads are never deleted.
2453 * dec-thread.c (dec_thread_ptid_is_alive): New function.
2454 (dec_thread_count_gdb_threads): Fix counter increment.
2455 (dec_thread_add_gdb_thread): Fix *listp increment.
2456 (resync_thread_list): Fix bug in deletion of dead threads that
2457 caused all threads to be deleted, instead of just the dead ones.
2459 2010-01-13 Phil Muldoon <pmuldoon@redhat.com>
2463 * python/python-internal.h: Add lazy_string_object_type
2465 (create_lazy_string_object, gdbpy_initialize_lazy_string)
2466 (gdbpy_is_lazystring, gdbpy_extract_lazy_string): Define.
2467 * python/py-value.c (valpy_lazy_string): New function.
2468 (convert_value_from_python): Add lazy string conversion.
2469 * python/py-prettyprint.c (pretty_print_one_value): Check if
2470 return is also a lazy string.
2471 (print_string_repr): Add lazy string printing branch.
2472 (print_children): Likewise.
2473 * python/py-lazy-string.c: New file. Implement lazy strings.
2474 * python/python.c (_initialize_python): Call
2475 gdbpy_initialize_lazy_string.
2476 * varobj.c (value_get_print_value): Add lazy string printing
2477 branch. Account for encoding.
2478 * c-lang.c (c_printstr): Account for new encoding argument. If
2479 encoding is NULL, find encoding suited for type, otherwise use
2481 * language.h (language_defn): Add encoding argument.
2482 (LA_PRINT_STRING): Likewise.
2483 * language.c (unk_lang_printstr): Update to reflect new encoding
2484 argument to language_defn.
2485 * ada-lang.h (ada_printstr): Likewise.
2486 * c-lang.h (c_printstr): Likewise.
2487 * p-lang.h (pascal_printstr);
2488 * f-lang.c (f_printstr): Likewise.
2489 * m2-lang.c (m2_printstr): Likewise.
2490 * objc-lang.c (objc_printstr): Likewise.
2491 * p-lang.c (pascal_printstr): Likewise.
2492 * scm-lang.c (scm_printstr): Likewise.
2493 * c-valprint.c (c_val_print): Update LA_PRINT_STRING call for
2495 * ada-valprint.c (ada_printstr): Likewise.
2496 * f-valprint.c (f_val_print): Likewise
2497 * m2-valprint.c (m2_val_print): Likewise.
2498 * p-valprint.c (pascal_val_print): Likewise.
2499 * expprint.c (print_subexp_standard): Likewise.
2500 * valprint.c (val_print_string): Likewise.
2501 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-lazy-string.
2502 (SUBDIR_PYTHON_SRCS): Likewise.
2503 (py-lazy-string.o): New rule.
2505 2010-01-13 Doug Evans <dje@google.com>
2507 * mi/mi-main.c (list_available_thread_groups): Avoid "may be used
2508 uninitialized" warning from gcc on local `tree'.
2510 2010-01-13 Vladimir Prus <vladimir@codesourcery.com>
2512 Implement core awareness.
2514 * bcache.c (compare_ints): Remove
2515 (print_percentage): Use compare_positive_ints.
2516 * defs.h (compare_positive_ints): Declare.
2517 * linux-nat.h (struct lin_lwp): New field core.
2518 (linux_nat_core_of_thread_1): Declare.
2519 * linux-nat.c (add_lwp): Init the 'core' field.
2520 (linux_nat_wait_1): Record the core.
2521 (linux_nat_core_of_thread_1, linux_nat_core_of_thread): New.
2522 (linux_nat_add_target): Register the above.
2523 * linux-thread-db.c (update_thread_core): New.
2524 (thread_db_find_new_threads): Update core information for
2526 * remote.c (struct private_thread_info): New.
2527 (free_private_thread_info, demand_private_info): New.
2528 (PACKET_qXfer_threads, use_osdata_threads): New.
2529 (struct thread_item, threads_parsing_context
2530 (start_thread, end_thread, thread_attributes)
2531 (thread_children, threads_children, threads_elements): New.
2532 (remote_threads_info): Try qXfer:threads before anything
2534 (remote_protocol_packets): Register qXfer:threads.
2535 (remote_open_1): Init use_osdata_threads.
2536 (struct stop_reply): New field 'core'.
2537 (remote_parse_stop_reply): Parse core number.
2538 (process_stop_reply): Record core number.
2539 (remote_xfer_partial): Handle qXfer:threads.
2540 (remote_core_of_thread): New.
2541 (init_remote_ops): Register remote_core_of_thread.
2542 (_initialize_remote): Register qXfer:read.
2543 * target.c (target_core_of_thread): New
2544 * target.h (enum target_object): New value TARGET_OBJECT_THREADS.
2545 (struct target_ops): New field to_core_of_threads.
2546 (target_core_of_thread): Declare.
2547 * gdbthread.h (struct thread_info): New field private_dtor.
2548 * thread.c (print_thread_info): Report the core.
2549 * ui-out.c (MAX_UI_OUT_LEVELS): Increase.
2550 * utils.c (compare_positive_ints): New.
2551 * features/threads.dtd: New.
2552 * mi/mi-interp.c (mi_on_normal_stop): Report the core.
2553 * mi/mi-main.c (struct collect_cores_data, collect_cores)
2554 (do_nothing, free_vector_of_osdata_items)
2555 (splay_tree_int_comparator, free_splay_tree): New.
2556 (print_one_inferior_data): Implemented printing of selected
2557 inferiors. Collect and print cores.
2558 (output_cores): New.
2559 (mi_cmd_list_thread_groups): Support --recurse. Permit specifying
2560 thread groups together with --available.
2562 2010-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2564 * configure: Regenerate (for _STRUCTURED_PROC).
2566 2010-01-12 Joel Brobecker <brobecker@adacore.com>
2568 Delete dead function.
2569 * ada-lang.c (extract_string): Delete. No longer used.
2571 2010-01-12 Joel Brobecker <brobecker@adacore.com>
2573 Fix -Wunused warning in dec-thread.c.
2574 * dec-thread.c (dec_thread_count_gdb_threads)
2575 (dec_thread_add_gdb_thread): Prevent -Wunused warning.
2577 2010-01-12 Joel Brobecker <brobecker@adacore.com>
2579 * ada-valprint.c (ada_print_floating): Remove trailing space.
2581 2010-01-12 Joel Brobecker <brobecker@adacore.com>
2583 Add support for DW_AT_GNAT_descriptive_type.
2584 * gdbtypes.h (enum type_specific_kind): New enum.
2585 (struct main_type) [type_specific_field]: New component.
2586 [type_specific]: Add new component "gnat_stuff".
2587 (struct gnat_aux_type): New type.
2588 (INIT_CPLUS_SPECIFIC): Also set TYPE_SPECIFIC_FIELD (type).
2589 (HAVE_CPLUS_STRUCT): Also check TYPE_SPECIFIC_FIELD (type).
2590 (gnat_aux_default, allocate_gnat_aux_type): Add declaration.
2591 (INIT_GNAT_SPECIFIC, ALLOCATE_GNAT_AUX_TYPE, HAVE_GNAT_AUX_INFO)
2592 (TYPE_SPECIFIC_FIELD): New macros.
2593 (TYPE_CPLUS_SPECIFIC): Return cplus_struct_default if the given
2594 type does not hold any cplus-specific data.
2595 (TYPE_RAW_CPLUS_SPECIFIC): New macro.
2596 (TYPE_GNAT_SPECIFIC, TYPE_DESCRIPTIVE_TYPE): New macros.
2597 (TYPE_IS_OPAQUE): Use HAVE_CPLUS_STRUCT to check if type has
2598 cplus-specific data.
2599 * gdbtypes.c (allocate_cplus_struct_type): Minor stylistic rewrite.
2600 Set new component TYPE_SPECIFIC_FIELD (type).
2601 (gnat_aux_default): New constant.
2602 (allocate_gnat_aux_type): New function.
2603 (init_type): Add initialization the type-specific stuff for
2604 TYPE_CODE_FLT and TYPE_CODE_FUNC types.
2605 (print_gnat_stuff): New function.
2606 (recursive_dump_type): Use HAVE_CPLUS_STRUCT to check for cplus-
2607 specific data. Adjust code that prints the contents of the
2608 type-specific union using the TYPE_SPECIFIC_FIELD value.
2609 * dwarf2read.c (dwarf2_attach_fields_to_type): Do not allocate
2610 the type cplus stuff for Ada types.
2611 (dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
2612 Error out if these routines are called with an Ada type.
2613 (read_structure_type, read_array_type, read_subrange_type):
2614 Add call to set_descriptive_type.
2615 (set_die_type): Initialize the gnat-specific data if necessary.
2616 (need_gnat_info, die_descriptive_type, set_descriptive_type):
2618 * ada-lang.c (decode_constrained_packed_array_type): Use
2619 decode_constrained_packed_array_type instead of doing a standard
2620 lookup to locate a parallel type.
2621 (find_parallel_type_by_descriptive_type): New function.
2622 (ada_find_parallel_type_with_name): New function.
2623 (ada_find_parallel_type): Reimplement using
2624 ada_find_parallel_type_with_name.
2625 * ada-valprint.c (print_field_values): Use HAVE_CPLUS_STRUCT
2626 to check if type has a cplus stuff.
2627 * linespec.c (total_number_of_methods): Likewise.
2628 * mdebugread.c (new_type): Likewise.
2630 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2632 * NEWS: Document the 0b binary number prefix parsing.
2634 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2636 * objfiles.c (objfile_relocate1): Change the return type to int.
2637 Describe the new return value. Return non-zero if data changed.
2638 (objfile_relocate): New variable changed. Set it. Call
2639 breakpoint_re_set depending on CHANGED.
2641 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2643 Implement binary numbers parsing.
2644 * c-exp.y (parse_number): New case 'b' and 'B'.
2646 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2647 Tristan Gingold <gingold@adacore.com>
2649 * solib.c (info_sharedlibrary_command): Replace
2650 objfile_has_partial_symbols and objfile_has_full_symbols calls by
2651 objfile_has_symbols.
2653 2010-01-10 Joel Brobecker <brobecker@adacore.com>
2655 * NEWS: Document the improvements made to the mips-irix port.
2657 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2659 Fix the documentation of valprint.c:value_print.
2660 * valprint.c (value_print): Update the function description to
2661 mention that the syntax of the output follows the current_language,
2664 2010-01-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2666 Fix displacement of separate debug info files.
2667 * objfiles.c (objfile_relocate): Rename to ...
2668 (objfile_relocate1): ... here and make it static. Extend the comment.
2669 (objfile_relocate): New function.
2670 * solib-spu.c (spu_relocate_main_executable): Explicitly check if
2671 SYMFILE_OBJFILE is NULL. Remove variables objfile and old_chain.
2672 Remove following of SEPARATE_DEBUG_OBJFILE. new_offsets is now
2673 allocated using alloca.
2674 * symfile.c (copy_section_addr_info): Remove.
2675 (build_section_addr_info_from_objfile): Make it global. New variables
2676 addr_bit and mask, use them.
2677 * symfile.h (build_section_addr_info_from_objfile): New prototype.
2678 (copy_section_addr_info): Remove.
2680 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2682 Signal unwinder for mips-irix N32.
2683 * mips-irix-tdep.c: #include mips-tdep.h, trad-frame.h, and
2685 (SIGTRAMP_FRAME_SIZE, SIGCONTEXT_PC_OFF, SIGCONTEXT_REGS_OFF)
2686 (SIGCONTEXT_FPREGS_OFF, SIGCONTEXT_FPCSR_OFF, SIGCONTEXT_HI_OFF)
2687 (SIGCONTEXT_LO_OFF): New macros.
2688 (mips_irix_n32_tramp_frame_init): New function.
2689 (mips_irix_n32_tramp_frame): New static constant.
2690 (mips_irix_init_abi): Prepend the mips_irix_n32_tramp_frame unwinder.
2692 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2694 Breakpoint in shared library does not work on mips-irix.
2695 * procfs.c: #include "observer.h".
2696 (procfs_inferior_created): New function, moving here the code
2697 which unsets the syssgi syscall-exit notifications.
2698 (procfs_create_inferior): Remove the code which unsets the syssgi
2699 syscall-exit notifications. It is too early to do this here.
2700 (_initialize_procfs): Attach the procfs_inferior_created observer.
2702 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2704 Wrong return convention for arrays (mips-irix).
2705 * mips-tdep.c (mips_n32n64_return_value): Arrays whose size is
2706 128 bits or smaller are returned the same way as structs
2707 and unions of the the same size.
2709 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2711 Cannot set the PC on mips-irix.
2712 * irix5-nat.c (fill_gregset): Check regno against the raw PC
2713 register number, no the cooked one.
2715 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2717 Error while loading core file on mips-irix.
2718 * solib-irix.c (irix_solib_create_inferior_hook): Do nothing
2719 if debugging from a core file.
2721 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2723 GDB hangs when attaching to process on mips-irix.
2724 * solib-irix.c (irix_solib_create_inferior_hook): Do nothing if
2725 attaching to a process.
2727 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2729 Use the correct breakpoint instruction on mips-irix.
2730 * mips-tdep.c (mips_breakpoint_from_pc): Add new static variable
2731 containing the correct breakpoint instruction to use on mips-irix.
2732 Use it when the osabi is GDB_OSABI_IRIX.
2734 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2736 -Wunused warning in procfs.c (mips-irix only).
2737 * procfs.c (gdb_praddset, gdb_prdelset): New macros. Use them
2738 throughout instead of using praddset and prdelset respectively.
2740 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2742 GDB crash while stepping into function.
2743 * infrun.c (handle_inferior_event): Refetch the current frame
2744 after handling what.main_action, in case that pointer became
2747 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2749 Fix build failure of solaris-hosted cross debuggers.
2750 * ada-valprint.c, parse.c: Include defs.h before including ctype.h.
2752 2010-01-09 Daniel Gutson <dgutson@codesourcery.com>
2754 Fix build failure on sparc-solaris.
2755 * procfs.c: (procfs_do_thread_registers) Use elfcore_write_lwpstatus.
2757 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2759 Move some symfile code into subroutines.
2760 * symfile.h (relative_addr_info_to_section_offsets)
2761 (addr_info_make_relative): New prototypes.
2762 * symfile.c (default_symfile_offsets): Move a part to ...
2763 (relative_addr_info_to_section_offsets): ... this new function.
2764 (default_symfile_offsets): Call it.
2765 (syms_from_objfile <!mainline && addrs && addrs->other[0].name>): Move
2767 (addr_info_make_relative): ... this new function.
2769 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2771 Add from_tty to solib_create_inferior_hook.
2772 * infcmd.c (post_create_inferior): Move solib_add after
2773 solib_create_inferior_hook. Pass from_tty to
2774 solib_create_inferior_hook. Call solib_add and SOLIB_ADD with
2775 0 from_tty and comment why.
2776 * infrun.c (follow_exec): Pass from_tty solib_create_inferior_hook as 0.
2777 * linux-nat.c (linux_child_follow_fork): Likewise.
2778 * nto-procfs.c (procfs_post_attach, procfs_create_inferior): Likewise.
2779 * solib-darwin.c (darwin_solib_create_inferior_hook): New parameter
2781 * solib-frv.c (frv_solib_create_inferior_hook): Likewise.
2782 * solib-irix.c (irix_solib_create_inferior_hook): Likewise.
2783 * solib-null.c (null_solib_create_inferior_hook): Likewise.
2784 * solib-osf.c (osf_solib_create_inferior_hook): Likewise.
2785 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
2786 * solib-som.c (som_solib_create_inferior_hook): Likewise.
2787 * solib-spu.c (spu_solib_create_inferior_hook): New parameter from_tty.
2788 Pass it to svr4_so_ops.solib_create_inferior_hook.
2789 * solib-sunos.c (sunos_solib_create_inferior_hook): New parameter
2791 * solib-svr4.c (enable_break): New parameter from_tty. Pass it to
2793 (svr4_solib_create_inferior_hook): New parameter from_tty. Pass it to
2795 * solib-target.c (solib_target_solib_create_inferior_hook): New
2797 * solib.c (solib_create_inferior_hook): New parameter from_tty. Pass
2798 it to ops->solib_create_inferior_hook.
2799 (reload_shared_libraries): Pass from_tty to solib_create_inferior_hook.
2800 Move solib_add after solib_create_inferior_hook, call it now with
2801 from_tty as 0. New comment there.
2802 * solib.h (solib_create_inferior_hook): New parameter from_tty.
2803 * solist.h (struct target_so_ops <solib_create_inferior_hook>):
2806 2010-01-08 Vladimir Prus <vladimir@codesourcery.com>
2809 * infrun.c (handle_inferior_event): Use get_thread_regcache
2810 with events ptid, not get_current_regcache.
2812 2009-01-08 Joel Brobecker <brobecker@adacore.com>
2814 GDB crash with empty executable name (MinGW).
2815 * source.c (openp): Add assert that parameter string is not NULL.
2816 if parameter string is an empty string, then return with a failure
2819 2009-01-08 Joel Brobecker <brobecker@adacore.com>
2821 Get rid of support for VAX Floats.
2822 * ada-lang.h (ada_is_vax_floating_type, ada_vax_float_type_suffix)
2823 (ada_vax_float_print_function): Delete.
2824 * ada-lang.c (ada_is_vax_floating_type, ada_vax_float_type_suffix)
2825 (ada_vax_float_print_function): Delete.
2826 * ada-typeprint.c (print_vax_floating_point_type): Delete.
2827 (ada_print_type): Remove support for VAX floats.
2828 * ada-valprint.c (ada_val_print_1): Remove support for VAX floats.
2830 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2832 * stabsread.c (read_args): Handle zero arguments.
2834 2009-01-08 Joel Brobecker <brobecker@adacore.com>
2836 Cannot find in-tree libiconv.a after reconfigure.
2837 * acinclude.m4 (AM_ICONV): If we find an in-tree libiconv.a
2838 that we can use, then cache the path to this archive.
2839 * configure: Regenerate.
2841 2010-01-07 Stan Shebs <stan@codesourcery.com>
2843 Make tracepoint operations go through target vector.
2844 * target.h (enum trace_find_type): New enum.
2845 (struct target_ops): New fields to_trace_init,
2846 to_download_tracepoint, to_download_trace_state_variable,
2847 to_trace_set_readonly_regions, to_trace_start, to_get_trace_status,
2848 to_trace_stop, to_trace_find, to_get_trace_state_variable_value,
2849 to_set_disconnected_tracing.
2850 (target_trace_init): New macro.
2851 (target_download_tracepoint): New macro.
2852 (target_download_trace_state_variable): New macro.
2853 (target_trace_start): New macro.
2854 (target_trace_set_readonly_regions): New macro.
2855 (target_get_trace_status): New macro.
2856 (target_trace_stop): New macro.
2857 (target_trace_find): New macro.
2858 (target_get_trace_state_variable_value): New macro.
2859 (target_set_disconnected_tracing): New macro.
2860 * target.c (update_current_target): Inherit and set defaults for
2861 tracepoint operations.
2862 * tracepoint.c (default_collect): Make globally visible.
2863 (target_is_remote): Remove, along with all calls.
2864 (tvariables_info): Call target_get_trace_state_variable_value.
2865 (remote_set_transparent_ranges): Remove.
2866 (trace_start_command): Call target_trace_init,
2867 target_download_tracepoint, etc.
2868 (download_tracepoint): Remove.
2869 (trace_stop_command): Simplify.
2870 (stop_tracing): Call target_trace_stop.
2871 (get_trace_status): Call target_get_trace_status.
2872 (trace_status_command): Add case for targets that cannot trace.
2873 (finish_tfind_command): Change to take numerical arguments, call
2875 (trace_find_command): Update call to finish_tfind_command.
2876 (trace_find_pc_command): Ditto.
2877 (trace_find_tracepoint_command): Ditto.
2878 (trace_find_line_command): Ditto.
2879 (trace_find_range_command): Ditto.
2880 (trace_find_outside_command): Ditto.
2881 (set_disconnected_tracing_value): Call
2882 target_set_disconnected_tracing.
2883 * remote.c: Add protocol encoding bits from tracepoint.c.
2884 (trace_error): Move from tracepoint.c.
2885 (remote_get_noisy_reply): Ditto.
2886 (free_actions_list_cleanup_wrapper): Ditto.
2887 (free_actions_list): Ditto.
2888 (remote_trace_init): New function.
2889 (remote_download_tracepoint): New function.
2890 (remote_download_trace_state_variable): New function.
2891 (remote_trace_set_readonly_regions): New function.
2892 (remote_trace_start): New function.
2893 (remote_get_trace_status): New function.
2894 (remote_trace_stop): New function.
2895 (remote_trace_find): New function.
2896 (remote_download_trace_state_variable): New function.
2897 (remote_set_disconnected_tracing): New function.
2898 (init_remote_ops): Add tracepoint operations.
2900 * tracepoint.c (trace_dump_command): Don't decr_pc_after_break.
2902 2010-01-07 Tristan Gingold <gingold@adacore.com>
2904 * symfile.c (build_section_addr_info_from_objfile): New function.
2905 (symbol_file_add_separate): Don't use offsets from objfile but
2908 2010-01-06 Stan Shebs <stan@codesourcery.com>
2910 Support disconnected tracing.
2911 * infcmd.c (detach_command): Ask whether to stop tracing.
2912 * cli/cli-cmds.c (quit_command): Ditto.
2913 * breakpoint.h (struct breakpoint): New field number_on_target.
2914 * breakpoint.c (create_tracepoint_from_upload): New function.
2915 (get_tracepoint_by_number_on_target): New function.
2916 * remote.c (struct remote): New field disconnected_tracing.
2917 (remote_disconnected_tracing_feature): New function.
2918 (remote_protocol_features): Add DisconnectedTracing.
2919 (struct uploaded_tp): New struct.
2920 (uploaded_tps): New global.
2921 (get_uploaded_tp): New function.
2922 (find_matching_tracepoint): New function.
2923 (remote_get_tracing_state): New function.
2924 (remote_start_remote): Call it.
2925 * tracepoint.c (disconnected_tracing): New global.
2926 (trace_start_command): Initialize number_on_target.
2927 (stop_tracing): New function, split out from...
2928 (trace_stop_command): Call stop_tracing.
2929 (get_trace_status): New function, split out from...
2930 (trace_status_command): Call get_trace_status, add info on
2931 disconnection behavior.
2932 (disconnect_or_stop_tracing): New function.
2933 (finish_tfind_command): Translate from number on target.
2934 (trace_find_tracepoint_command): Translate to number on target.
2935 (send_disconnected_tracing_value): New function.
2936 (set_disconnected_tracing): New function.
2937 (_initialize_tracepoint): Add disconnected-tracing variable.
2938 * NEWS: Mention disconnected tracing.
2940 2010-01-06 Tristan Gingold <gingold@adacore.com>
2942 * symtab.c (lookup_global_symbol_from_objfile): Rename objfile
2943 parameter to main_objfile. Iterate on all separate debug objfiles.
2944 * symfile.h (symbol_file_add_separate)
2945 (find_separate_debug_file_by_debuglink): Remove parameter names.
2946 * symfile.c (symbol_file_add_separate): Use add_separate_objfile.
2947 (reread_symbols): Use free_objfile_separate_debug.
2948 * objfiles.h (struct objfile): Add separate_debug_objfile_link.
2950 (objfile_separate_debug_iterate, add_separate_debug_objfile)
2951 (free_objfile_separate_debug): New prototypes.
2952 * objfiles.c (objfile_separate_debug_iterate): New function.
2953 (add_separate_debug_objfile, free_objfile_separate_debug): New
2955 (free_objfile): Use free_objfile_separate_debug. Adjust for
2956 multiple separate debug objfile.
2957 (objfile_has_symbols): Adjust comment. Iterate on all separate
2959 * minsyms.c (lookup_minimal_symbol): Adjust for multiple separate
2961 (lookup_minimal_symbol_text): Ditto.
2962 (lookup_minimal_symbol_by_pc_name): Ditto.
2963 (lookup_minimal_symbol_solib_trampoline): Ditto.
2964 (lookup_minimal_symbol_by_pc_section_1): Iterate on all separate
2967 2010-01-05 Stan Shebs <stan@codesourcery.com>
2969 Add fast tracepoints.
2970 * arch-utils.h (default_fast_tracepoint_valid_at): Declare.
2971 * arch-utils.c (default_fast_tracepoint_valid_at): New function.
2972 * breakpoint.h (enum bptype): Add bp_fast_tracepoint.
2973 * breakpoint.c (tracepoint_type): New function.
2974 (ALL_TRACEPOINTS): Use it.
2975 (should_be_inserted): Ditto.
2976 (bpstat_check_location): Ditto.
2977 (print_one_breakpoint_location): Ditto.
2978 (user_settable_breakpoint): Ditto.
2979 (set_breakpoint_location_function): Ditto.
2980 (disable_breakpoints_in_shlibs): Ditto.
2981 (delete_trace_command): Ditto.
2982 (print_it_typical): Add bp_fast_tracepoint case.
2983 (bpstat_what): Ditto.
2984 (print_one_breakpoint_location): Ditto.
2985 (allocate_bp_location): Ditto.
2987 (breakpoint_re_set_one): Ditto.
2988 (disable_command): Ditto.
2989 (enable_command): Ditto.
2990 (check_fast_tracepoint_sals): New function.
2991 (break_command_really): Call it.
2992 (ftrace_command): New function.
2993 (_initialize_breakpoint): Add ftrace command.
2994 * gdbarch.sh (fast_tracepoint_valid_at): New.
2995 * gdbarch.h, gdbarch.c: Regenerate.
2996 * i386-tdep.c (i386_fast_tracepoint_valid_at): New function.
2997 (i386_gdbarch_init): Use it.
2998 * remote.c (struct remote_state): New field fast_tracepoints.
2999 (PACKET_FastTracepoints): New packet config type.
3000 (remote_fast_tracepoint_feature): New function.
3001 (remote_protocol_features): Add FastTracepoints.
3002 (remote_supports_fast_tracepoints): New function.
3003 (_initialize_remote): Add FastTracepoints.
3004 * tracepoint.c (download_tracepoint): Add fast tracepoint option.
3005 * NEWS: Mention fast tracepoints.
3007 2010-01-06 Joel Brobecker <brobecker@adacore.com>
3009 * gdb-gdb.py: New file.
3011 2010-01-05 Michael Snyder <msnyder@vmware.com>
3013 * infrun.c (handle_inferior_event): Fix typo in comment.
3015 2010-01-05 Jan Kratochvil <jan.kratochvil@redhat.com>
3017 * symfile.c (syms_from_objfile): Remove the !MAINLINE conditional.
3019 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
3021 * features/Makefile (WHICH): Add s390-linux32, s390-linux64,
3023 (s390-linux32-expedite): Define.
3024 (s390-linux64-expedite): Define.
3025 (s390x-linux64-expedite): Define.
3026 * features/s390-acr.xml: New file.
3027 * features/s390-fpr.xml: New file.
3028 * features/s390-core32.xml: New file.
3029 * features/s390-core64.xml: New file.
3030 * features/s390x-core64.xml: New file.
3031 * features/s390-linux32.xml: New file.
3032 * features/s390-linux64.xml: New file.
3033 * features/s390x-linux64.xml: New file.
3034 * features/s390-linux32.c: New generated file.
3035 * features/s390-linux64.c: New generated file.
3036 * features/s390x-linux64.c: New generated file.
3038 * regformats/s390-linux32.dat: New generated file.
3039 * regformats/s390-linux64.dat: New generated file.
3040 * regformats/s390x-linux64.dat: New generated file.
3041 * regformats/reg-s390.dat: Remove.
3042 * regformats/reg-s390x.dat: Remove.
3044 * s390-nat.c: Include "auxv.h" and <elf.h>.
3045 (HWCAP_S390_HIGH_GPRS): Define if undefined.
3046 (s390_target_wordsize): New function.
3047 (s390_auxv_parse): Likewise.
3048 (s390_get_hwcap): Likewise.
3049 (s390_read_description): Likewise.
3050 (_initialize_s390_nat): Install s390_auxv_parse and
3051 s390_read_description.
3053 * s390-tdep.c: Include "features/s390-linux32.c",
3054 "features/s390-linux64.c", and "features/s390x-linux64.c".
3055 (struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
3056 (s390_register_call_saved): New function.
3057 (s390_register_name): Remove.
3058 (s390_register_type): Remove.
3059 (s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
3060 (s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
3061 (s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
3062 (s390_pseudo_register_name): New function.
3063 (s390_pseudo_register_type): New function.
3064 (s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
3065 Handle full GPR pesudos and varying pseudo register numbers.
3066 (s390_pseudo_register_write): Likewise
3067 (s390x_pseudo_register_read): Remove.
3068 (s390x_pseudo_register_write): Likewise.
3069 (s390_register_group): Remove.
3070 (s390_pseudo_register_group): New function.
3071 (s390_regmap_gregset): Add GPR upper halves.
3072 (s390x_regmap_gregset): Likewise.
3073 (s390_regmap_fpregset): Likewise.
3074 (s390_regmap_upper): New global variable.
3075 (s390_upper_regset): New global variable.
3076 (s390_upper_regset_sections): New global variable.
3077 (s390_regset_from_core_section): Handle GPR upper halves.
3078 (s390_core_read_description): New function.
3079 (s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
3080 register information. Handle varying pseudo register numbers.
3081 (s390_backchain_frame_unwind_cache): Likewise.
3082 (s390_frame_prev_register): Unwind full GPRs to show lower halves.
3083 (s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
3084 (s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
3085 PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
3086 Handle varying pseudo register numbers.
3087 (s390_unwind_pc): Handle varying pseudo register numbers.
3088 (s390_dwarf2_prev_register): New function.
3089 (s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
3090 register information. Handle varying pseudo register numbers.
3091 Install s390_dwarf2_prev_register to unwind full GPRs.
3092 (s390_gdbarch_init): Handle target descriptions. Assign varying
3093 pseudo register numbers. Install s390_adjust_frame_regnum.
3094 (_initialize_s390_tdep): Initialize target descriptions.
3096 * s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
3097 (S390_NUM_REGS): Redefine to include upper half registers.
3098 (S390_PC_REGNUM, S390_CC_REGNUM): Remove.
3099 (S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
3100 (tdesc_s390_linux32): Add declaration.
3101 (tdesc_s390_linux64): Likewise.
3102 (tdesc_s390x_linux64): Likewise.
3104 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
3106 * regset.h (struct core_regset_section): Add HUMAN_NAME.
3107 * i386-linux-tdep.c (i386_linux_regset_sections): Fill in HUMAN_NAME.
3108 * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections): Likewise.
3109 (ppc_linux_vmx_regset_sections): Likewise.
3110 (ppc_linux_fp_regset_sections): Likewise.
3112 * corelow.c (get_core_register_section): Constify arguments.
3113 (get_core_registers): Use gdbarch_core_regset_sections instead
3114 of hard-coded platform-specific register section names.
3116 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
3118 * dwarf2loc.c (read_pieced_value): If a piece occupies part of
3119 a register, assume the least-significant part is used.
3120 (write_pieced_value): Likewise.
3122 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
3124 * printcmd.c: Include "arch-utils.h".
3125 (do_one_display): Re-parse expression if current architecture changed.
3127 2010-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3128 Joel Brobecker <brobecker@adacore.com>
3130 * gdbtypes.c (check_typedef): New comment on type length.
3131 * value.c (allocate_value_lazy): Remove the unused atype variable. New
3132 comment on type length.
3133 (value_primitive_field): Keep the original TYPE value, new comment.
3135 2010-01-01 Jan Kratochvil <jan.kratochvil@redhat.com>
3137 * cli/cli-script.c (process_next_line): Rename p1 as p_end and p2 as
3138 p_start. Change != comparisons to > and < comparisons.
3140 2010-01-01 Jan Kratochvil <jan.kratochvil@redhat.com>
3142 * cli/cli-script.c (process_next_line): Check P2 overrun.
3144 2009-01-01 Joel Brobecker <brobecker@adacore.com>
3146 Update the copyright hearder to add year 2010 for most GDB files.
3148 2009-01-01 Joel Brobecker <brobecker@adacore.com>
3150 Fix build failure in inf-ptrace.c.
3151 * inf-ptrace.c (inf_ptrace_follow_fork): Fix typo.
3153 2010-01-01 Joel Brobecker <brobecker@adacore.com>
3155 * top.c (print_gdb_version): Update copyright year.
3157 2010-01-01 Joel Brobecker <brobecker@adacore.com>
3159 Fix break *FUN'address thread NUM.
3160 * ada-lex.l (task): Expand rule to also match the thread keyword.
3162 2010-01-01 Joel Brobecker <brobecker@adacore.com>
3164 Fix break *FUN'address task NUM.
3165 * ada-lex.l (task): New rule.
3166 * ada-lang.c (valid_task_id): Make sure the Ada task list has
3167 been built before using it.
3169 For older changes see ChangeLog-2009.
3175 version-control: never