1 2014-02-17 Yao Qi <yao@codesourcery.com>
3 * gnu-nat.c (proc_get_exception_port): Use 'lu' insetad of 'd'
5 (proc_steal_exc_port, make_proc, inf_set_pid): Likewise.
6 (inf_validate_procs, inf_signal): Likewise.
7 (S_exception_raise_request): Likewise.
8 (do_mach_notify_dead_name): Likewise.
9 (steal_exc_port): Likewise.
10 (gnu_read_inferior): Change 'copy_count''s type to
11 mach_msg_type_number_t.
12 (gnu_write_inferior): Likewise. Use 'lx' instead of 'x' in
15 2014-02-16 Thomas Schwinge <thomas@codesourcery.com>
17 * gnu-nat.c (struct inf): Change pending_execs member to a 1-bit
18 flag. Adjust all users; in particular...
19 (gnu_wait): ..., don't decrement its value in here...
20 (gnu_create_inferior): ..., and instead set the flag in here,
21 around the startup_inferior call, and call that one with
22 START_INFERIOR_TRAPS_EXPECTED.
24 * gnu-nat.c (ill_rpc): Remove function; replaced with this...
25 (ILL_RPC): ... new macro.
26 (do_mach_notify_no_senders, do_mach_notify_port_deleted)
27 (do_mach_notify_msg_accepted, do_mach_notify_port_destroyed)
28 (do_mach_notify_send_once, S_proc_setmsgport_reply)
29 (S_proc_getmsgport_reply, S_msg_sig_post_reply): Generate stub
30 functions with ILL_RPC macro.
31 (S_proc_pid2task_reply, S_proc_task2pid_reply)
32 (S_proc_task2proc_reply, S_proc_proc2task_reply)
33 (S_proc_pid2proc_reply, S_proc_getprocinfo_reply)
34 (S_proc_getprocargs_reply, S_proc_getprocenv_reply)
35 (S_proc_getloginid_reply, S_proc_getloginpids_reply)
36 (S_proc_getlogin_reply, S_proc_getsid_reply)
37 (S_proc_getsessionpgids_reply, S_proc_getsessionpids_reply)
38 (S_proc_getsidport_reply, S_proc_getpgrp_reply)
39 (S_proc_getpgrppids_reply, S_proc_get_tty_reply)
40 (S_proc_getnports_reply, S_proc_is_important_reply)
41 (S_proc_get_code_reply): New stub functions, generated with
44 * reply_mig_hack.awk: In phase 5, keep going if we have not yet
45 collected the type check structures.
47 * reply_mig_hack.awk: Don't expect to see the auto keyword.
49 2014-02-14 Doug Evans <dje@google.com>
51 * target.c (target_write_partial): Fix result type.
53 2014-02-14 Jose E. Marchesi <jose.marchesi@oracle.com>
55 * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Register
56 the proper offsets to access fpregset_t.
58 2014-02-13 Sanimir Agovic <sanimir.agovic@intel.com>
60 * cris-tdep.c (cris_supply_gregset): Remove zerobuf.
61 (_initialize_cris_tdep): Remove cris_set_cmdlist, cris_show_cmdlist.
62 * h8300-tdep.c (setmachinelist): Remove global.
63 * hppa-tdep.c (hppa_sigtramp): Remove global.
64 * mipsnbsd-tdep.c (sigtramp_retcode_mipsel, sigtramp_retcode_mipseb
65 RETCODE_NWORDS, RETCODE_SIZE): Wrap code with #if 0.
66 * ravenscar-thread.c (update_target_observer): Remove global.
67 * rs6000-tdep.c (rs6000_gdbarch_init): Remove segment_regs.
69 2014-02-12 Tom Tromey <tromey@redhat.com>
71 * common/rsp-low.c: Update comments.
72 * common/rsp-low.h: Update comments.
74 2014-02-12 Tom Tromey <tromey@redhat.com>
76 * common/rsp-low.c (convert_ascii_to_int): Remove.
77 * common/rsp-low.h (convert_ascii_to_int): Don't declare.
79 2014-02-12 Tom Tromey <tromey@redhat.com>
81 * common/rsp-low.h (unhexify): Don't declare.
82 * common/rsp-low.c (unhexify): Remove.
84 2014-02-12 Tom Tromey <tromey@redhat.com>
86 * common/rsp-low.h (convert_int_to_ascii): Don't declare.
87 * common/rsp-low.c (convert_int_to_ascii): Remove.
89 2014-02-12 Tom Tromey <tromey@redhat.com>
91 * common/rsp-low.h (hexify): Don't declare.
92 * common/rsp-low.c (hexify): Remove.
94 2014-02-12 Tom Tromey <tromey@redhat.com>
96 * common/rsp-low.c (hexify): Never take strlen of argument.
98 2014-02-12 Tom Tromey <tromey@redhat.com>
100 * common/rsp-low.c (bin2hex): Never take strlen of argument.
101 * remote.c (extended_remote_run, remote_rcmd)
102 (remote_download_trace_state_variable, remote_save_trace_data)
103 (remote_set_trace_notes): Update.
104 * tracepoint.c (encode_source_string, tfile_write_status)
105 (tfile_write_uploaded_tsv): Update.
107 2014-02-12 Tom Tromey <tromey@redhat.com>
109 * tracepoint.c: Include rsp-low.h.
110 * remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
111 * remote.c: Include rsp-low.h.
112 (hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
113 (fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
114 (remote_unescape_input): Move to common/rsp-low.c.
115 * common/rsp-low.h: New file.
116 * common/rsp-low.c: New file.
117 * Makefile.in (SFILES): Add common/rsp-low.c.
118 (HFILES_NO_SRCDIR): Add common/rsp-low.h.
119 (COMMON_OBS): Add rsp-low.o.
120 (rsp-low.o): New target.
122 2014-02-12 Tom Tromey <tromey@redhat.com>
124 * utils.h: Include print-utils.h.
125 (host_address_to_string, plongest, pulongest, phex, phex_nz)
126 (int_string, core_addr_to_string, core_addr_to_string_nz)
127 (hex_string, hex_string_custom): Don't declare.
128 * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest)
129 (plongest, thirty_two, phex, phex_nz, octal2str, hex_string)
130 (hex_string_custom, int_string, core_addr_to_string)
131 (core_addr_to_string_nz, host_address_to_string): Move to
132 common/print-utils.c.
133 * common/print-utils.h: New file.
134 * common/print-utils.c: New file
135 * Makefile.in (SFILES): Add common/print-utils.c.
136 (HFILES_NO_SRCDIR): Add common/print-utils.h.
137 (COMMON_OBS): Add print-utils.o.
138 (print-utils.o): New target.
140 2014-02-12 Tom Tromey <tromey@redhat.com>
142 * nios2-tdep.c (nios2_stub_frame_base_address): Remove.
144 2014-02-12 Mark Kettenis <kettenis@gnu.org>
146 * sparc64obsd-tdep.c (sparc64obsd_init_abi): Call obsd_init_abi.
148 2014-02-12 Mark Kettenis <kettenis@gnu.org>
150 * inf-ptrace.c (inf_ptrace_xfer_partial): Return TARGET_XFER_EOF
151 if a PT_IO ptrace request returns sucessfully but indicates that 0
152 bytes were transferred.
154 2014-02-12 Pedro Alves <palves@redhat.com>
155 Kevin Buettner <kevinb@redhat.com>
157 * gnu-v3-abi.c (build_gdb_vtable_type): Return a type marked with
158 TYPE_INSTANCE_FLAG_CODE_SPACE.
160 2014-02-12 Pedro Alves <palves@redhat.com>
162 * h8300-tdep.c (pseudo_from_raw_register)
163 (raw_from_pseudo_register): New functions.
164 (h8300_pseudo_register_read, h8300_pseudo_register_write): Use
167 2014-02-12 Pedro Alves <palves@redhat.com>
169 * h8300-tdep.c (h8300_register_sim_regno): New function.
170 (h8300_gdbarch_init): Install h8300_register_sim_regno as
171 gdbarch_register_sim_regno hook.
173 2014-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
175 * nios2-tdep.c (nios2_stub_frame_base): Remove global.
177 2014-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
179 * tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default.
181 2014-02-12 Mark Kettenis <kettenis@gnu.org>
183 * obsd-tdep.h (obsd_init_abi): New prototype.
184 * obsd-tdep.c: Define enum with OpenBSD signal numbers.
185 (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target)
186 (obsd_init_abi): New functions.
187 * i386obsd-tdep.c: Include "obsd-tdep.h".
188 (i386obsd_init_abi): Call obsd_init_abi.
189 * amd64obsd-tdep.c: Include "obsd-tdep.h".
190 (amd64obsd_init_abi): Call obsd_init_abi.
191 * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add
192 obsd-tdep.c to gdb_target_obs.
194 2014-02-11 Jose E. Marchesi <jose.marchesi@oracle.com>
196 * sparc64-tdep.c (sparc64_store_arguments): Do not align complex
197 double float arguments to 16-byte in the argument slots.
199 2014-02-11 Doug Evans <xdje42@gmail.com>
201 * configure.ac: Don't crash if pkg-config is not found and guile
202 wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR
204 * configure: Regenerate.
206 2014-02-11 Yao Qi <yao@codesourcery.com>
208 * aix-thread.c (aix_thread_xfer_partial): Update comments.
209 * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise.
210 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
211 * gnu-nat.c (gnu_xfer_memory): Likewise.
212 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
213 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
214 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
215 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
217 2014-02-11 Yao Qi <yao@codesourcery.com>
219 * target.h (enum target_xfer_error): Rename to ...
220 (enum target_xfer_status): ... it. New. All users updated.
221 (enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
223 (TARGET_XFER_STATUS_ERROR_P): New macro.
224 (target_xfer_error_to_string): Remove declaration.
225 (target_xfer_status_to_string): Declare.
226 (target_xfer_partial_ftype): Adjust it.
227 (struct target_ops) <to_xfer_partial>: Return
228 target_xfer_status. Add argument xfered_len. Update
230 * target.c (target_xfer_error_to_string): Rename to ...
231 (target_xfer_status_to_string): ... it. New. All callers
233 (target_read_live_memory): Likewise. Call target_xfer_partial
234 instead of target_read.
235 (memory_xfer_live_readonly_partial): Return
236 target_xfer_status. Add argument xfered_len.
237 (raw_memory_xfer_partial): Likewise.
238 (memory_xfer_partial_1): Likewise.
239 (memory_xfer_partial): Likewise.
240 (target_xfer_partial): Likewise. Check *XFERED_LEN is set
241 properly. Update debug message.
242 (default_xfer_partial, current_xfer_partial): Likewise.
243 (target_write_partial): Likewise.
244 (target_read_partial): Likewise. All callers updated.
245 (read_whatever_is_readable): Likewise.
246 (target_write_with_progress): Likewise.
247 (target_read_alloc_1): Likewise.
249 * aix-thread.c (aix_thread_xfer_partial): Likewise.
250 * auxv.c (procfs_xfer_auxv): Likewise.
251 (ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
252 * bfd-target.c (target_bfd_xfer_partial): Likewise.
253 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
254 * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
255 * corefile.c (read_memory): Adjust.
256 * corelow.c (core_xfer_partial): Likewise.
257 * ctf.c (ctf_xfer_partial): Likewise.
258 * darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
260 (darwin_xfer_partial): Likewise.
261 * exec.c (section_table_xfer_memory_partial): Likewise. All
263 (exec_xfer_partial): Likewise.
264 * exec.h (section_table_xfer_memory_partial): Update
266 * gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
268 (gnu_xfer_partial): Likewise.
269 * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
270 (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
271 (ia64_hpux_xfer_solib_got): Likewise.
272 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
273 type of 'partial_len' to ULONGEST.
274 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
275 * linux-nat.c (linux_xfer_siginfo ): Likewise.
276 (linux_nat_xfer_partial): Likewise.
277 (linux_proc_xfer_partial, linux_xfer_partial): Likewise.
278 (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
279 * monitor.c (monitor_xfer_memory): Likewise.
280 (monitor_xfer_partial): Likewise.
281 * procfs.c (procfs_xfer_partial): Likewise.
282 * record-btrace.c (record_btrace_xfer_partial): Likewise.
283 * record-full.c (record_full_xfer_partial): Likewise.
284 (record_full_core_xfer_partial): Likewise.
285 * remote-sim.c (gdbsim_xfer_memory): Likewise.
286 (gdbsim_xfer_partial): Likewise.
287 * remote.c (remote_write_bytes_aux): Likewise. All callers
289 (remote_write_bytes, remote_read_bytes): Likewise. All
291 (remote_flash_erase): Likewise. All callers updated.
292 (remote_write_qxfer): Likewise. All callers updated.
293 (remote_read_qxfer): Likewise. All callers updated.
294 (remote_xfer_partial): Likewise.
295 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
296 (rs6000_xfer_shared_libraries): Likewise.
297 * sol-thread.c (sol_thread_xfer_partial): Likewise.
298 (sol_thread_xfer_partial): Likewise.
299 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
300 (sparc_xfer_partial): Likewise.
301 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
303 (spu_xfer_partial): Likewise.
304 * spu-multiarch.c (spu_xfer_partial): Likewise.
305 * tracepoint.c (tfile_xfer_partial): Likewise.
306 * windows-nat.c (windows_xfer_memory): Likewise.
307 (windows_xfer_shared_libraries): Likewise.
308 (windows_xfer_partial): Likewise.
309 * valprint.c: Replace 'target_xfer_error' with
310 'target_xfer_status' in comments.
312 2014-02-11 Simon Marchi <simon.marchi@ericsson.com> (tiny patch)
314 Checked in by Joel Brobecker <brobecker@adacore.com>.
315 * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.
317 2014-02-11 Joel Brobecker <brobecker@adacore.com>
319 * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
322 2014-02-10 Will Newton <will.newton@linaro.org>
324 * elfread.c (elf_rel_plt_read): Look for a .got section if
325 looking up .got.plt fails.
326 (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
327 on address passed to elf_gnu_ifunc_record_cache.
328 (elf_gnu_ifunc_resolve_addr): Likewise.
329 (elf_gnu_ifunc_resolver_return_stop): Likewise.
331 2014-02-10 Jose E. Marchesi <jose.marchesi@oracle.com>
333 * sparc-tdep.c (sparc_in_function_epilogue_p): New function.
334 (X_RETTURN): New macro.
335 * sparc-tdep.h: sparc_in_function_epilogue_p prototype.
337 * sparc64-tdep.c (sparc64_init_abi): Hook
338 sparc_in_function_epilogue_p.
340 2014-02-10 Gary Benson <gbenson@redhat.com>
342 * symfile-debug.c (debug_qf_expand_symtabs_matching):
343 Rename name_matcher to symbol_matcher.
345 2014-02-10 Gary Benson <gbenson@redhat.com>
347 * symfile-debug.c (debug_qf_expand_symtabs_matching):
348 Use expand_symtabs_file_matcher_ftype and
349 expand_symtabs_symbol_matcher_ftype.
351 2014-02-10 Joel Brobecker <brobecker@adacore.com>
353 * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
354 (struct ada_symbol_cache): New.
355 (ada_free_symbol_cache): Forward declare.
356 (struct ada_pspace_data): New.
357 (ada_pspace_data_handle): New static global.
358 (get_ada_pspace_data, ada_pspace_data_cleanup)
359 (ada_init_symbol_cache, ada_free_symbol_cache): New functions.
360 (cache_space, cache): Delete, now folded inside struct
362 (ada_get_symbol_cache): New function.
363 (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
365 (_initialize_ada_language): Remove initialization of cache_space.
366 Move call to observer_attach_inferior_exit up, grouping it
367 with the other observer registrations inside this function.
368 Rename command to be more general. Add call to
369 register_program_space_data_with_cleanup.
371 2014-02-10 Joel Brobecker <brobecker@adacore.com>
373 * ada-tasks.c (ada_tasks_new_objfile_observer): Renames
374 ada_new_objfile_observer.
375 (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
376 (_initialize_tasks): Update uses of ada_new_objfile_observer
377 and ada_tasks_normal_stop_observer.
379 2014-02-10 Joel Brobecker <brobecker@adacore.com>
381 * ada-lang.c (ada_evaluate_subexp): Set the type of the value
382 returned by the 'Length attribute to integer.
384 2014-02-10 Joel Brobecker <brobecker@adacore.com>
386 * ada-lang.c (_initialize_ada_language): Initialize
389 2014-02-10 Joel Brobecker <brobecker@adacore.com>
391 * ada-lang.c (HASH_SIZE): New macro.
392 (struct cache_entry): New type.
393 (cache_space, cache): New static globals.
394 (ada_clear_symbol_cache, find_entry): New functions.
395 (lookup_cached_symbol, cache_symbol): Implement.
396 (ada_new_objfile_observer, ada_free_objfile_observer): New.
397 (_initialize_ada_language): Attach ada_new_objfile_observer
398 and ada_free_objfile_observer.
400 2014-02-10 Joel Brobecker <brobecker@adacore.com>
402 * ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
403 (lookup_cached_symbol, ada_add_local_symbols): Add "const" to
404 struct block * parameter.
405 (ada_lookup_symbol_list_worker): Constify local variable "block".
406 Remove cast which is no longer necessary.
408 2014-02-10 Doug Evans <xdje42@gmail.com>
410 Add Guile as an extension language.
411 * NEWS: Mention Guile scripting.
412 * Makefile.in (SUBDIR_GUILE_OBS): New variable.
413 (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
414 (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
415 (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
416 (CLIBS): Add GUILE_LIBS.
417 (install-guile): New rule.
419 (scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
420 (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
421 (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
422 (scm-math.o, scm-objfile.o, scm-ports.o): New rules.
423 (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
424 (scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
425 (scm-type.o, scm-utils.o, scm-value.o): New rules.
426 * configure.ac: New option --with-guile.
427 * configure: Regenerate.
428 * config.in: Regenerate.
429 * auto-load.c: Remove #include "python/python.h". Add #include
430 "gdb/section-scripts.h".
431 (source_section_scripts): Handle Guile scripts.
432 (_initialize_auto_load): Add name of Guile objfile script to
433 scripts-directory help text.
434 * breakpoint.c (condition_command): Tweak comment to include Scheme.
435 * breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
436 (struct breakpoint): New member scm_bp_object.
437 * defs.h (enum command_control_type): New value guile_control.
438 * cli/cli-cmds.c: Remove #include "python/python.h". Add #include
440 (show_user): Update comment.
441 (_initialize_cli_cmds): Update help text for "show user". Update help
442 text for max-user-call-depth.
443 * cli/cli-script.c: Remove #include "python/python.h". Add #include
445 (multi_line_command_p): Add guile_control.
446 (print_command_lines): Handle guile_control.
447 (execute_control_command, recurse_read_control_structure): Ditto.
448 (process_next_line): Recognize "guile" commands.
449 * disasm.c (gdb_disassemble_info): Make non-static.
450 * disasm.h: #include "dis-asm.h".
451 (struct gdbarch): Add forward decl.
452 (gdb_disassemble_info): Declare.
453 * extension.c: #include "guile/guile.h".
454 (extension_languages): Add guile.
455 (get_ext_lang_defn): Handle EXT_LANG_GDB.
456 * extension.h (enum extension_language): New value EXT_LANG_GUILE.
457 * gdbtypes.c (get_unsigned_type_max): New function.
458 (get_signed_type_minmax): New function.
459 * gdbtypes.h (get_unsigned_type_max): Declare.
460 (get_signed_type_minmax): Declare.
461 * guile/README: New file.
462 * guile/guile-internal.h: New file.
463 * guile/guile.c: New file.
464 * guile/guile.h: New file.
465 * guile/scm-arch.c: New file.
466 * guile/scm-auto-load.c: New file.
467 * guile/scm-block.c: New file.
468 * guile/scm-breakpoint.c: New file.
469 * guile/scm-disasm.c: New file.
470 * guile/scm-exception.c: New file.
471 * guile/scm-frame.c: New file.
472 * guile/scm-gsmob.c: New file.
473 * guile/scm-iterator.c: New file.
474 * guile/scm-lazy-string.c: New file.
475 * guile/scm-math.c: New file.
476 * guile/scm-objfile.c: New file.
477 * guile/scm-ports.c: New file.
478 * guile/scm-pretty-print.c: New file.
479 * guile/scm-safe-call.c: New file.
480 * guile/scm-string.c: New file.
481 * guile/scm-symbol.c: New file.
482 * guile/scm-symtab.c: New file.
483 * guile/scm-type.c: New file.
484 * guile/scm-utils.c: New file.
485 * guile/scm-value.c: New file.
486 * guile/lib/gdb.scm: New file.
487 * guile/lib/gdb/boot.scm: New file.
488 * guile/lib/gdb/experimental.scm: New file.
489 * guile/lib/gdb/init.scm: New file.
490 * guile/lib/gdb/iterator.scm: New file.
491 * guile/lib/gdb/printing.scm: New file.
492 * guile/lib/gdb/types.scm: New file.
493 * data-directory/Makefile.in (GUILE_SRCDIR): New variable.
494 (VPATH): Add $(GUILE_SRCDIR).
495 (GUILE_DIR): New variable.
496 (GUILE_INSTALL_DIR, GUILE_FILES): New variables.
497 (all): Add stamp-guile dependency.
498 (stamp-guile): New rule.
499 (clean-guile, install-guile, uninstall-guile): New rules.
500 (install-only): Add install-guile dependency.
501 (uninstall): Add uninstall-guile dependency.
502 (clean): Add clean-guile dependency.
504 2014-02-09 Doug Evans <xdje42@gmail.com>
506 Revert this patch (which I approved, mea culpa).
508 2014-02-08 Mark Kettenis <kettenis@gnu.org>
510 * Makefile.in (all-lib): Remove.
511 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
513 2014-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
515 Fix Python stack corruption.
516 * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
519 2014-02-08 Mark Kettenis <kettenis@gnu.org>
521 * Makefile.in (all-lib): Remove.
522 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
524 2014-02-07 Doug Evans <dje@google.com>
526 * extension-priv.h (extension_language_script_ops): Add comment.
527 (extension_language_ops): Add comment.
528 (active_ext_lang_state): Fix typo in comment.
530 2014-02-07 Pedro Alves <palves@redhat.com>
532 * infrun.c (handle_signal_stop) <signal arrives while stepping
533 over a breakpoint>: Switch back to the stepping thread.
535 2014-02-07 Yao Qi <yao@codesourcery.com>
537 * target.c (target_xfer_partial): Return zero if LEN is zero.
539 2014-02-07 Yao Qi <yao@codesourcery.com>
541 * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
542 (ld_so_xfer_auxv): Likewise.
543 * bfd-target.c (target_bfd_xfer_partial): Likewise.
544 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
545 * corelow.c (core_xfer_partial): Likewise.
546 * ctf.c (ctf_xfer_partial): Likewise.
547 * darwin-nat.c (darwin_read_dyld_info): Likewise.
548 (darwin_xfer_partial): Likewise.
549 * exec.c (exec_xfer_partial): Likewise.
550 * gnu-nat.c (gnu_xfer_partial): Likewise.
551 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
552 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
553 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
554 * linux-nat.c (linux_xfer_siginfo): Likewise.
555 (linux_proc_xfer_spu): Likewise.
556 * procfs.c (procfs_xfer_partial): Likewise.
557 * record-full.c (record_full_xfer_partial): Likewise.
558 (record_full_core_xfer_partial): Likewise.
559 * remote-sim.c (gdbsim_xfer_partial): Likewise.
560 * remote.c (remote_write_qxfer): Likewise.
561 (remote_write_qxfer, remote_read_qxfer): Likewise.
562 (remote_xfer_partial): Likewise.
563 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
564 (rs6000_xfer_shared_libraries): Likewise.
565 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
566 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
567 (spu_xfer_partial): Likewise.
568 * target.c (memory_xfer_partial_1): Likewise.
569 * tracepoint.c (tfile_xfer_partial): Likewise.
570 * windows-nat.c (windows_xfer_shared_libraries): Likewise.
571 (windows_xfer_partial): Likewise.
573 2014-02-07 Yao Qi <yao@codesourcery.com>
575 * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add
577 (core_xfer_shared_libraries_aix): Likewise.
578 * gdbarch.c, gdbarch.h: Regenerated.
579 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
580 ULONGEST. Change 'len_avail' type to ULONGEST.
581 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
582 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
584 (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
586 2014-02-07 Yao Qi <yao@codesourcery.com>
588 * corefile.c (memory_error): Get 'exception' from ERR and pass
589 'exception' to throw_error.
591 2014-02-06 Doug Evans <xdje42@gmail.com>
593 * configure.ac (libpython checking): Remove all but python.o from
594 CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
595 * configure: Regenerate.
597 * Makefile.in (SFILES): Add extension.c.
598 (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
599 (COMMON_OBS): Add extension.o.
600 * extension.h: New file.
601 * extension-priv.h: New file.
602 * extension.c: New file.
604 * python/python-internal.h: #include "extension.h".
605 (gdbpy_auto_load_enabled): Declare.
606 (gdbpy_apply_val_pretty_printer): Declare.
607 (gdbpy_apply_frame_filter): Declare.
608 (gdbpy_preserve_values): Declare.
609 (gdbpy_breakpoint_cond_says_stop): Declare.
610 (gdbpy_breakpoint_has_cond): Declare.
611 (void source_python_script_for_objfile): Delete.
612 * python/python.c: #include "extension-priv.h".
613 Delete inclusion of "observer.h".
614 (extension_language_python): Moved here and renamed from
615 script_language_python in py-auto-load.c.
616 Redefined to be of type extension_language_defn.
617 (python_extension_script_ops): New global.
618 (python_extension_ops): New global.
619 (struct python_env): New member previous_active.
620 (restore_python_env): Call restore_active_ext_lang.
621 (ensure_python_env): Call set_active_ext_lang.
622 (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
624 (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
626 (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
628 (gdbpy_eval_from_control_command): Renamed from
629 eval_python_from_control_command, made static. New arg extlang.
630 (gdbpy_source_script) Renamed from source_python_script, made static.
632 (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
633 result to int. New arg extlang.
634 (gdbpy_source_objfile_script): Renamed from
635 source_python_script_for_objfile, made static. New arg extlang.
636 (gdbpy_start_type_printers): Renamed from start_type_printers, made
637 static. New args extlang, extlang_printers. Change result type to
639 (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
640 static. New arg extlang. Rename arg printers to extlang_printers
641 and change type to ext_lang_type_printers *.
642 (gdbpy_free_type_printers): Renamed from free_type_printers, made
643 static. Replace argument arg with extlang, extlang_printers.
644 (!HAVE_PYTHON, eval_python_from_control_command): Delete.
645 (!HAVE_PYTHON, source_python_script): Delete.
646 (!HAVE_PYTHON, gdbpy_should_stop): Delete.
647 (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
648 (!HAVE_PYTHON, start_type_printers): Delete.
649 (!HAVE_PYTHON, apply_type_printers): Delete.
650 (!HAVE_PYTHON, free_type_printers): Delete.
651 (_initialize_python): Delete call to observer_attach_before_prompt.
652 (finalize_python): Set/restore active extension language.
653 (gdbpy_finish_initialization) Renamed from
654 finish_python_initialization, made static. New arg extlang.
655 (gdbpy_initialized): New function.
656 * python/python.h: #include "extension.h". Delete #include
657 "value.h", "mi/mi-cmds.h".
658 (extension_language_python): Declare.
659 (GDBPY_AUTO_FILE_NAME): Delete.
660 (enum py_bt_status): Moved to extension.h and renamed to
662 (enum frame_filter_flags): Moved to extension.h.
663 (enum py_frame_args): Moved to extension.h and renamed to
665 (finish_python_initialization): Delete.
666 (eval_python_from_control_command): Delete.
667 (source_python_script): Delete.
668 (apply_val_pretty_printer): Delete.
669 (apply_frame_filter): Delete.
670 (preserve_python_values): Delete.
671 (gdbpy_script_language_defn): Delete.
672 (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
673 (start_type_printers, apply_type_printers, free_type_printers): Delete.
675 * auto-load.c: #include "extension.h".
676 (GDB_AUTO_FILE_NAME): Delete.
677 (auto_load_gdb_scripts_enabled): Make public. New arg extlang.
678 (script_language_gdb): Delete, moved to extension.c and renamed to
679 extension_language_gdb.
680 (source_gdb_script_for_objfile): Delete.
681 (auto_load_pspace_info): New member unsupported_script_warning_printed.
682 (loaded_script): Change type of language member to
683 struct extension_language_defn *.
684 (init_loaded_scripts_info): Initialize
685 unsupported_script_warning_printed.
686 (maybe_add_script): Make static. Change type of language arg to
687 struct extension_language_defn *.
688 (clear_section_scripts): Reset unsupported_script_warning_printed.
689 (auto_load_objfile_script_1): Rewrite to use extension language API.
690 (auto_load_objfile_script): Make public. Remove support-compiled-in
691 and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
692 (source_section_scripts): Rewrite to use extension language API.
693 (load_auto_scripts_for_objfile): Rewrite to use
694 auto_load_scripts_for_objfile.
695 (collect_matching_scripts_data): Change type of language member to
696 struct extension_language_defn *.
697 (auto_load_info_scripts): Change type of language arg to
698 struct extension_language_defn *.
699 (unsupported_script_warning_print): New function.
700 (script_not_found_warning_print): Make static.
701 (_initialize_auto_load): Rewrite construction of scripts-directory
703 * auto-load.h (struct objfile): Add forward decl.
704 (struct script_language): Delete.
705 (struct auto_load_pspace_info): Add forward decl.
706 (struct extension_language_defn): Add forward decl.
707 (maybe_add_script): Delete.
708 (auto_load_objfile_script): Declare.
709 (script_not_found_warning_print): Delete.
710 (auto_load_info_scripts): Update prototype.
711 (auto_load_gdb_scripts_enabled): Declare.
712 * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
713 auto_load_python_scripts_enabled and made public.
714 (script_language_python): Delete, moved to python.c.
715 (gdbpy_script_language_defn): Delete.
716 (info_auto_load_python_scripts): Update to use
717 extension_language_python.
719 * breakpoint.c (condition_command): Replace call to
720 gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
721 (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
722 with call to breakpoint_ext_lang_cond_says_stop.
723 * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
724 from gdbpy_should_stop. Change result type to enum scr_bp_stop.
725 New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
726 (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
728 (local_setattro): Print name of extension language with existing
731 * valprint.c (val_print, value_print): Update to call
732 apply_ext_lang_val_pretty_printer.
733 * cp-valprint.c (cp_print_value): Update call to
734 apply_ext_lang_val_pretty_printer.
735 * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
736 (gdbpy_apply_val_pretty_printer): Renamed from
737 apply_val_pretty_printer. New arg extlang.
738 (!HAVE_PYTHON, apply_val_pretty_printer): Delete.
740 * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
741 extension language API.
742 * cli/cli-script.c (execute_control_command): Update to call
743 eval_ext_lang_from_control_command.
745 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
746 enum ext_lang_bt_status values. Update call to
747 apply_ext_lang_frame_filter.
748 (mi_cmd_stack_list_locals): Ditto.
749 (mi_cmd_stack_list_args): Ditto.
750 (mi_cmd_stack_list_variables): Ditto.
751 * mi/mi-main.c: Delete #include "python/python-internal.h".
752 Add #include "extension.h".
753 (mi_cmd_list_features): Replace reference to python internal variable
754 gdb_python_initialized with call to ext_lang_initialized_p.
756 * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
757 Update to use enum ext_lang_frame_args. Update to call
758 apply_ext_lang_frame_filter.
759 * python/py-framefilter.c (extract_sym): Update to use enum
761 (extract_value, py_print_type, py_print_value): Ditto.
762 (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
763 (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
764 (py_print_frame): Ditto.
765 (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
766 New arg extlang. Update to use enum ext_lang_bt_status.
768 * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
769 finish_python_initialization. Replace with call to
770 finish_ext_lang_initialization.
772 * typeprint.c (do_free_global_table): Update to call
773 free_ext_lang_type_printers.
774 (create_global_typedef_table): Update to call
775 start_ext_lang_type_printers.
776 (find_global_typedef): Update to call apply_ext_lang_type_printers.
777 * typeprint.h (struct ext_lang_type_printers): Add forward decl.
778 (type_print_options): Change type of global_printers from "void *"
779 to "struct ext_lang_type_printers *".
781 * value.c (preserve_values): Update to call preserve_ext_lang_values.
782 * python/py-value.c: Remove #ifdef HAVE_PYTHON.
783 (gdbpy_preserve_values): Renamed from preserve_python_values.
785 (!HAVE_PYTHON, preserve_python_values): Delete.
787 * utils.c (quit_flag): Delete, moved to extension.c.
788 (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
791 * eval.c: Delete #include "python/python.h".
792 * main.c: Delete #include "python/python.h".
794 * defs.h: Update comment.
796 2014-02-06 Joel Brobecker <brobecker@adacore.com>
800 2014-02-05 Mark Kettenis <kettenis@gnu.org>
802 * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
805 2014-02-05 Yao Qi <yao@codesourcery.com>
807 * remote.c (remote_pass_signals): Remove local 'buf' and use
809 (remote_program_signals): Likewise.
811 2014-02-05 Yao Qi <yao@codesourcery.com>
813 * ctf.c: Include "inferior.h" and "gdbthread.h".
814 (CTF_PID): A new macro.
815 (ctf_open): Call inferior_appeared and add_thread_silent.
816 (ctf_close): Call exit_inferior_silent and set inferior_ptid.
817 (ctf_thread_alive): New function.
818 (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
820 2014-02-05 Yao Qi <yao@codesourcery.com>
824 2013-05-24 Yao Qi <yao@codesourcery.com>
826 * tracepoint.c (TFILE_PID): Remove.
827 (tfile_open): Don't add thread and inferior.
828 (tfile_close): Don't set 'inferior_ptid'. Don't call
829 exit_inferior_silent.
830 (tfile_thread_alive): Remove.
831 (init_tfile_ops): Don't set field 'to_thread_alive' of
834 2014-02-04 Christian Eggers <ceggers@gmx.de> (tiny change)
836 * remote.c (remote_start_remote): Call remote_check_symbols even
837 if only symbol-file (not file) has been given.
839 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
841 * gdbarch.sh (skip_entrypoint): New callback.
842 * gdbarch.c, gdbarch.h: Regenerate.
843 * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
844 * infrun.c (fill_in_stop_func): Likewise.
845 * ppc-linux-tdep.c: Include "elf/ppc64.h".
846 (ppc_elfv2_elf_make_msymbol_special): New function.
847 (ppc_elfv2_skip_entrypoint): Likewise.
848 (ppc_linux_init_abi): Install them for ELFv2.
850 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
852 * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
853 (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
854 (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
855 (ppc64_sysv_abi_return_value): Likewise. Also, handle small
856 structures returned in GPRs.
858 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
860 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
861 offset to the stack parameter list for the ELFv2 ABI.
863 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
865 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
866 set_gdbarch_convert_from_func_ptr_addr and
867 set_gdbarch_elf_make_msymbol_special for ELFv1.
868 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
869 function descriptors on ELFv1.
870 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
871 set up r12 at function entry.
873 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
875 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
876 (struct gdbarch_tdep): New member elf_abi.
878 * rs6000-tdep.c: Include "elf/ppc64.h".
879 (rs6000_gdbarch_init): Detect ELF ABI version.
881 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
883 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
884 within a register pair holding a DFP 128-bit value on little-endian.
885 (ppc64_sysv_abi_return_value_base): Likewise.
886 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
887 (dfp_pseudo_register_write): Likewise.
889 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
891 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
892 offset on little-endian when passing _Decimal32.
893 (ppc64_sysv_abi_return_value_base): Likewise for return values.
895 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
897 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
898 of the overlapped FP register within the VSX register on little-
900 (efpr_pseudo_register_write): Likewise.
902 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
904 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
905 offset on little-endian when passing small structures.
907 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
909 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
910 (struct ppc64_sysv_argpos): New data structure.
911 (ppc64_sysv_abi_push_float): Remove.
912 (ppc64_sysv_abi_push_val): New function.
913 (ppc64_sysv_abi_push_integer): Likewise.
914 (ppc64_sysv_abi_push_freg): Likewise.
915 (ppc64_sysv_abi_push_vreg): Likewise.
916 (ppc64_sysv_abi_push_param): Likewise.
917 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
918 (ppc64_sysv_abi_return_value_base): New function.
919 (ppc64_sysv_abi_return_value): Refactor to use it.
921 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
923 * NEWS: Document new target powerpc64le-*-linux*.
925 2014-02-04 Mark Kettenis <kettenis@gnu.org>
927 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
928 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
930 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
931 register set used in ELF core dumps. Add floating-point register set.
933 2014-02-03 Kevin Buettner <kevinb@redhat.com>
935 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
936 dwarf2_to_gdb[] table using symbolic constants. Adjust
937 penultimate entry from number representing the PC register
938 to symbolic constant representing the MDR register. Add
939 constant for the PC register to the end of the table.
941 2014-02-03 Mark Kettenis <kettenis@gnu.org>
943 * bsd-kvm.c: Include <sys/param.h>
945 2014-02-03 Mark Kettenis <kettenis@gnu.org>
947 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
949 2014-01-31 Joel Brobecker <brobecker@adacore.com>
951 * ada-lang.h (clear_ada_sym_cache): Delete.
953 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
955 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
957 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
959 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
960 the sigreturn register save area only if the syscall is
963 2014-01-29 Joel Brobecker <brobecker@adacore.com>
965 * valops.c (value_slice): Minor reformatting.
967 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
969 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
971 2014-01-28 Joel Brobecker <brobecker@adacore.com>
973 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
975 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
976 (ada_ignore_descriptive_types_p): New static global.
977 (find_parallel_type_by_descriptive_type): Return immediately
978 if ada_ignore_descriptive_types_p is set.
979 (_initialize_ada_language): Register new commands "maintenance
980 set ada", "maintenance show ada", "maintenance set ada
981 ignore-descriptive-types" and "maintenance show ada
982 ignore-descriptive-types".
983 * NEWS: Add entry for new "maint ada set/show
984 ignore-descriptive-types" commands.
986 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
988 * record-btrace.c (record_btrace_close): Call btrace_teardown
991 2014-01-27 Joel Brobecker <brobecker@adacore.com>
993 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
996 2014-01-27 Joel Brobecker <brobecker@adacore.com>
998 * ada-typeprint (type_is_full_subrange_of_target_type):
1000 (print_range): Add parameter bounds_prefered_p. If not set,
1001 try printing range types using the name of their base type.
1002 (print_range_type): Add parameter bounds_prefered_p.
1003 Use it in call to print_range.
1004 (print_array_type, ada_print_type): Update calls to print_range
1005 and print_range_type.
1007 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1009 * ada-typeprint.c (print_array_type, print_choices, print_range)
1010 (print_range_bound, print_dynamic_range_bound, print_range_type):
1013 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1015 * ada-typeprint.c (print_range): Add missing empty line
1016 after local declaration.
1018 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1020 * ada-valprint.c (print_optional_low_bound): Get index_type's
1021 target type for as long as it is a TYPE_CODE_RANGE.
1023 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1025 * procfs.c (procfs_make_note_section): Remove assertion and
1028 2014-01-24 Yao Qi <yao@codesourcery.com>
1030 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
1031 * corelow.c (get_core_siginfo): Likewise.
1033 2014-01-24 Yao Qi <yao@codesourcery.com>
1035 * remote.c (remote_write_bytes_aux): Change type of 'len' to
1036 ULONGEST. Don't check 'len' is negative.
1037 (remote_write_bytes): Change type of 'len' to ULONGEST.
1039 2014-01-23 Tom Tromey <tromey@redhat.com>
1042 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
1043 Handle exception from frame.block.
1044 (FrameVars.fetch_frame_locals): Likewise.
1046 2014-01-23 Tom Tromey <tromey@redhat.com>
1049 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
1050 on a NULL pointer. Move "goto error" to correct place.
1052 2014-01-23 Tom Tromey <tromey@redhat.com>
1055 * python/py-framefilter.c (apply_frame_filter): Call
1056 ensure_python_env after computing gdbarch.
1058 2014-01-23 Yao Qi <yao@codesourcery.com>
1060 * target.c (raw_memory_xfer_partial): Change argument type
1061 from void * to gdb_byte *.
1062 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
1064 2014-01-22 Doug Evans <dje@google.com>
1066 New gdbserver option --debug-format=timestamp.
1069 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
1071 * syscalls/s390x-linux.xml: New file.
1072 * syscalls/s390-linux.xml: New file.
1073 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
1074 (XML_SYSCALL_FILENAME_S390X): Likewise.
1075 (op_svc): New enum value for SVC opcode.
1076 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
1077 (s390_linux_get_syscall_number): New function.
1078 (s390_gdbarch_init): Register '*get_syscall_number' and the
1079 syscall xml file name.
1080 * data-directory/Makefile.in (SYSCALLS_FILES): Add
1081 "s390-linux.xml" and "s390x-linux.xml".
1082 * NEWS: Announce new feature.
1084 2014-01-22 Baruch Siach <baruch@tkos.co.il>
1086 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
1088 2014-01-22 Pedro Alves <palves@redhat.com>
1090 * xtensa-config.c: Include defs.h.
1092 2014-01-22 Joel Brobecker <brobecker@adacore.com>
1094 * common/common-utils.h: Add "ARI:" comment beside __func__
1097 2014-01-22 Joel Brobecker <brobecker@adacore.com>
1099 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
1100 documentation a bit.
1102 2014-01-21 Roland McGrath <mcgrathr@google.com>
1104 * configure.ac: Call AM_PROG_INSTALL_STRIP.
1105 * configure: Regenerate.
1106 * aclocal.m4: Regenerate.
1107 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
1108 New substituted variables.
1109 (install-strip): New target.
1110 (INSTALL_SCRIPT): New substituted variable.
1111 (FLAGS_TO_PASS): Add it.
1112 (install-only): Use $(INSTALL_SCRIPT) rather than
1113 $(INSTALL_PROGRAM) for gcore.
1115 2014-01-20 Tom Tromey <tromey@redhat.com>
1117 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
1120 2014-01-20 Tom Tromey <tromey@redhat.com>
1122 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
1123 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
1124 (deprecated_cmd_warning, complete_on_cmdlist): Update.
1125 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
1126 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
1127 (struct cmd_list_element) <flags>: Remove.
1128 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
1129 doc_allocated>: New fields.
1130 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
1132 * maint.c (maintenance_do_deprecate): Update.
1133 * top.c (execute_command): Update.
1135 2014-01-20 Baruch Siach <baruch@tkos.co.il>
1137 * xtensa-linux-nat.c: Include asm/ptrace.h.
1139 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1141 * Makefile.in (SFILES): Add d-support.c.
1142 (COMMON_OBS): Add d-support.o.
1143 * d-lang.h (d_parse_symbol): Add comment, now defined in
1145 * d-lang.c (parse_call_convention)
1146 (parse_attributes, parse_function_types)
1147 (parse_function_args, parse_type, parse_identifier)
1148 (call_convention_p, d_parse_symbol): Move functions to ...
1149 * d-support.c: ... New file.
1151 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1153 * d-lang.h (d_parse_symbol): Add declaration.
1154 * d-lang.c (extract_identifiers)
1155 (extract_type_info): Remove functions.
1156 (parse_call_convention, parse_attributes)
1157 (parse_function_types, parse_function_args)
1158 (parse_type, parse_identifier, call_convention_p)
1159 (d_parse_symbol): New functions.
1160 (d_demangle): Use d_parse_symbol to demangle D symbols.
1162 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1164 * d-lang.h (struct builtin_d_type): New data type.
1165 (builtin_d_type): Add declaration.
1166 * d-lang.c (d_language_arch_info, build_d_types)
1167 (builtin_d_type): New functions.
1168 (enum d_primitive_types): New data type.
1169 (d_language_defn): Change c_language_arch_info to
1170 d_language_arch_info.
1171 (d_type_data): New static variable.
1172 (_initialize_d_language): Initialize d_type_data.
1174 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1176 * d-lang.h (d_main_name): Add declaration.
1177 * d-lang.c (d_main_name): New function.
1178 * symtab.c (find_main_name): Add call to d_main_name.
1180 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1182 * d-lang.c (d_language_defn): Change macro_expansion_c to
1185 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1187 * MAINTAINERS: Add myself as a write-after-approval maintainer.
1189 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
1191 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
1192 gdb_exception" declaration.
1193 * remote.c (getpkt_or_notif_sane): Likewise.
1195 2014-01-17 Doug Evans <dje@google.com>
1197 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
1198 function, contents of dirnames_to_char_ptr_vec_append moved here.
1199 (delim_string_to_char_ptr_vec): New function.
1200 (dirnames_to_char_ptr_vec_append): Rewrite.
1201 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
1203 2014-01-17 Doug Evans <dje@google.com>
1205 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
1207 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
1208 #include "common-utils.h".
1209 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
1210 * common/vec.h (VEC_ASSERT_PASS): Update.
1211 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
1212 (MACH_CHECK_ERROR): Update.
1214 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
1216 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
1218 * gdbarch.h: Regenerate.
1220 2014-01-16 Tom Tromey <tromey@redhat.com>
1222 * value.c (struct value) <regnum>: Move earlier.
1224 2014-01-16 Tom Tromey <tromey@redhat.com>
1226 * remote.c (extended_remote_create_inferior): Rename from
1227 extended_remote_create_inferior_1. Add "ops" argument. Remove
1230 2014-01-16 Pedro Alves <palves@redhat.com>
1232 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
1233 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
1236 2014-01-16 Doug Evans <dje@google.com>
1238 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
1240 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1242 * btrace.h (btrace_thread_flag): New.
1243 (struct btrace_thread_info) <flags>: New.
1244 * record-btrace.c (record_btrace_resume_thread)
1245 (record_btrace_find_thread_to_move, btrace_step_no_history)
1246 (btrace_step_stopped, record_btrace_start_replaying)
1247 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
1248 (record_btrace_find_resume_thread): New.
1249 (record_btrace_resume, record_btrace_wait): Extend.
1250 (record_btrace_can_execute_reverse): New.
1251 (record_btrace_open): Fail in non-stop mode.
1252 (record_btrace_set_replay): Split into this, ...
1253 (record_btrace_stop_replaying): ... this, ...
1254 (record_btrace_clear_histories): ... and this.
1255 (init_record_btrace_ops): Init to_can_execute_reverse.
1256 * NEWS: Announce it.
1258 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1260 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
1261 (forward_target_decr_pc_after_break)
1262 (target_decr_pc_after_break): New.
1263 * target.c (forward_target_decr_pc_after_break)
1264 (target_decr_pc_after_break): New.
1265 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
1266 instead of gdbarch_decr_pc_after_break.
1267 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1268 instead of gdbarch_decr_pc_after_break.
1269 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
1270 instead of gdbarch_decr_pc_after_break.
1271 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1272 instead of gdbarch_decr_pc_after_break.
1273 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
1274 instead of gdbarch_decr_pc_after_break.
1275 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
1276 instead of gdbarch_decr_pc_after_break.
1278 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1280 * btrace.c: Include regcache.h.
1281 (btrace_add_pc): New.
1282 (btrace_enable): Call btrace_add_pc.
1283 (btrace_is_empty): New.
1284 * btrace.h (btrace_is_empty): New.
1285 * record-btrace.c (require_btrace, record_btrace_info): Call
1288 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1290 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
1291 Support delta reads.
1292 (linux_disable_btrace): Change return type.
1293 * common/linux-btrace.h (linux_read_btrace): Change parameters
1294 and return type to allow error reporting. Update users.
1295 (linux_disable_btrace): Change return type. Update users.
1296 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
1298 (btrace_error): New.
1299 (btrace_block) <begin>: Comment on BEGIN == 0.
1300 * btrace.c (btrace_compute_ftrace): Start from the end of
1302 (btrace_stitch_trace, btrace_clear_history): New.
1303 (btrace_fetch): Read delta trace, return if replaying.
1304 (btrace_clear): Move clear history code to btrace_clear_history.
1305 (parse_xml_btrace): Throw an error if parsing failed.
1306 * target.h (struct target_ops) <to_read_btrace>: Change parameters
1307 and return type to allow error reporting.
1308 (target_read_btrace): Change parameters and return type to allow
1310 * target.c (target_read_btrace): Update.
1311 * remote.c (remote_read_btrace): Support delta reads. Pass
1313 * NEWS: Announce it.
1315 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1317 * record.h (record_btrace_frame_unwind)
1318 (record_btrace_tailcall_frame_unwind): New declarations.
1319 * dwarf2-frame: Include record.h
1320 (dwarf2_frame_cfa): Throw an error for btrace frames.
1321 * record-btrace.c: Include hashtab.h.
1322 (btrace_get_bfun_name): New.
1323 (btrace_call_history): Call btrace_get_bfun_name.
1324 (struct btrace_frame_cache): New.
1326 (bfcache_hash, bfcache_eq, bfcache_new): New.
1327 (btrace_get_frame_function): New.
1328 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
1329 (record_btrace_frame_this_id): Compute own id.
1330 (record_btrace_frame_prev_register): Provide PC, throw_error
1331 for all other registers.
1332 (record_btrace_frame_sniffer): Detect btrace frames.
1333 (record_btrace_tailcall_frame_sniffer): New.
1334 (record_btrace_frame_dealloc_cache): New.
1335 (record_btrace_frame_unwind): Add new functions.
1336 (record_btrace_tailcall_frame_unwind): New.
1337 (_initialize_record_btrace): Allocate cache.
1338 * btrace.c (btrace_clear): Call reinit_frame_cache.
1339 * NEWS: Announce it.
1341 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1343 * record-btrace.c (record_btrace_set_replay)
1344 (record_btrace_goto_begin, record_btrace_goto_end)
1345 (record_btrace_goto): New.
1346 (init_record_btrace_ops): Initialize them.
1347 * NEWS: Announce it.
1349 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1351 * record-btrace.c (record_btrace_find_new_threads)
1352 (record_btrace_thread_alive): New.
1353 (init_record_btrace_ops): Initialize to_find_new_threads and
1356 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1358 * record-btrace.c (record_btrace_resume): New.
1359 (record_btrace_wait): New.
1360 (init_record_btrace_ops): Initialize to_wait and to_resume.
1362 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1364 * record-btrace.c (record_btrace_xfer_partial)
1365 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
1366 (record_btrace_allow_memory_access): New.
1367 (init_record_btrace_ops): Initialize new methods.
1368 * target.c (raw_memory_xfer_partial): Bail out if target reports
1369 that this memory is not available.
1371 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1373 * target.h (target_ops) <to_insert_breakpoint>
1374 <to_remove_breakpoint>: Add target_ops parameter.
1375 (forward_target_insert_breakpoint): New.
1376 (forward_target_remove_breakpoint): New.
1377 (memory_remove_breakpoint, memory_insert_breakpoint):
1378 Add target_ops parameter.
1379 * target.c (target_insert_breakpoint): Split into this and ...
1380 (forward_target_insert_breakpoint): ... this.
1381 (target_remove_breakpoint): Split into this and ...
1382 (forward_target_remove_breakpoint): ... this.
1383 (debug_to_insert_breakpoint): Add target_ops parameter.
1384 Call forward_target_insert_breakpoint.
1385 (debug_to_remove_breakpoint): Add target_ops parameter.
1386 Call forward_target_remove_breakpoint.
1387 (update_current_target): Do not inherit or default to_insert_breakpoint
1388 and to_remove_breakpoint.
1389 * corelow.c (ignore): Add target_ops parameter.
1390 * exec.c (ignore): Add target_ops parameter.
1391 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
1392 Add target_ops parameter.
1393 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
1394 Add target_ops parameter.
1395 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
1396 Add target_ops parameter.
1397 * record-full.c (record_full_beneath_to_insert_breakpoint)
1398 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
1399 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
1400 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
1401 (record_full_core_remove_breakpoint): Add target_ops parameter.
1403 (record_full_beneath_to_insert_breakpoint_ops)
1404 (record_full_beneath_to_remove_breakpoint_ops)
1405 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
1406 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
1407 tmp_to_remove_breakpoint_ops,
1408 record_full_beneath_to_insert_breakpoint_ops, and
1409 record_full_beneath_to_remove_breakpoint_ops.
1410 * remote-m32r-sdi.c (m32r_insert_breakpoint)
1411 (m32r_remove_breakpoint): Add target_ops parameter.
1412 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
1413 Add target_ops parameter.
1414 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
1415 Add target_ops parameter.
1417 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1418 Markus Metzger <markus.t.metzger@intel.com>
1420 * record-btrace.c: Include frame-unwind.h.
1421 (record_btrace_frame_unwind_stop_reason)
1422 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
1423 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
1425 (init_record_btrace_ops): Install it.
1427 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1429 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
1432 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1434 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
1437 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1439 * frame-unwind.c: Include target.h.
1440 (frame_unwind_try_unwinder): New function with code from ...
1441 (frame_unwind_find_by_frame): ... here. New variable
1442 unwinder_from_target, call also target_get_unwinder)
1443 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
1444 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
1445 * target.h (struct target_ops): New fields to_get_unwinder and
1446 to_get_tailcall_unwinder.
1447 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
1449 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1451 * record-btrace.c (record_btrace_fetch_registers)
1452 (record_btrace_store_registers)
1453 (record_btrace_to_prepare_to_store): New.
1454 (init_record_btrace_ops): Add the above.
1456 2014-01-16 Tom Tromey <tromey@redhat.com>
1458 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
1459 * target.h (struct target_ops) <to_prepare_to_store>: Add
1461 (target_prepare_to_store): Add argument.
1462 * target.c (debug_to_prepare_to_store): Add argument.
1463 (update_current_target): Update.
1464 * remote.c (remote_prepare_to_store): Add 'self' argument.
1465 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
1466 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
1467 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
1468 * record-full.c (record_full_core_prepare_to_store): Add 'self'
1470 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
1471 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
1472 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
1473 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
1474 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
1476 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1478 * btrace.h (replay) <replay>: New.
1479 (btrace_is_replaying): New.
1480 * btrace.c (btrace_clear): Free replay iterator.
1481 (btrace_is_replaying): New.
1482 * record-btrace.c (record_btrace_is_replaying): New.
1483 (record_btrace_info): Print insn number if replaying.
1484 (record_btrace_insn_history): Start at replay position.
1485 (record_btrace_call_history): Start at replay position.
1486 (init_record_btrace_ops): Init to_record_is_replaying.
1488 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1490 * record-btrace.c (record_btrace_insn_history_range): Include
1492 (record_btrace_insn_history_from): Adjust range.
1493 (record_btrace_call_history_range): Include
1495 (record_btrace_call_history_from): Adjust range.
1496 * NEWS: Announce changes.
1498 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1500 * record.h (enum record_print_flag)
1501 <record_print_indent_calls>: New.
1502 * record.c (get_call_history_modifiers): Recognize /c modifier.
1503 (_initialize_record): Document /c modifier.
1504 * record-btrace.c (btrace_call_history): Add btinfo parameter.
1505 Reorder fields. Optionally indent the function name. Update
1507 * NEWS: Announce changes.
1509 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1511 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
1513 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1515 * btrace.c (ftrace_new_function): Start counting at one.
1516 * record-btrace.c (record_btrace_info): Adjust number of calls
1518 * NEWS: Announce it.
1520 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1522 * record-btrace.c (btrace_call_history_insn_range): Print
1523 insn range as [begin, end].
1525 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1527 * btrace.h (struct btrace_func_link): New.
1528 (enum btrace_function_flag): New.
1529 (struct btrace_inst): Rename to ...
1530 (struct btrace_insn): ...this. Update all users.
1531 (struct btrace_func) <ibegin, iend>: Remove.
1532 (struct btrace_func_link): New.
1533 (struct btrace_func): Rename to ...
1534 (struct btrace_function): ...this. Update all users.
1535 (struct btrace_function) <segment, flow, up, insn, insn_offset)
1536 (number, level, flags>: New.
1537 (struct btrace_insn_iterator): Rename to ...
1538 (struct btrace_insn_history): ...this.
1540 (struct btrace_insn_iterator, btrace_call_iterator): New.
1541 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
1542 (struct btrace_target_info) <begin, end, level>
1543 <insn_history, call_history>: New.
1544 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1545 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1546 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1547 (btrace_call_number, btrace_call_begin, btrace_call_end)
1548 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1549 (btrace_find_function_by_number, btrace_set_insn_history)
1550 (btrace_set_call_history): New.
1551 * btrace.c (btrace_init_insn_iterator)
1552 (btrace_init_func_iterator, compute_itrace): Remove.
1553 (ftrace_print_function_name, ftrace_print_filename)
1554 (ftrace_skip_file): Change
1556 (ftrace_init_func): Remove.
1557 (ftrace_debug): Use new btrace_function fields.
1558 (ftrace_function_switched): Also consider gaining and
1559 losing symbol information).
1560 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
1561 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
1562 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
1564 (ftrace_new_function): Move. Remove debug print.
1565 (ftrace_update_lines, ftrace_update_insns): New.
1566 (ftrace_update_function): Check for call, ret, and jump.
1567 (compute_ftrace): Renamed to ...
1568 (btrace_compute_ftrace): ...this. Rewritten to compute call
1570 (btrace_fetch, btrace_clear): Updated.
1571 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1572 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1573 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1574 (btrace_call_number, btrace_call_begin, btrace_call_end)
1575 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1576 (btrace_find_function_by_number, btrace_set_insn_history)
1577 (btrace_set_call_history): New.
1578 * record-btrace.c (require_btrace): Use new btrace thread
1580 (record_btrace_info, btrace_insn_history)
1581 (record_btrace_insn_history, record_btrace_insn_history_range):
1582 Use new btrace thread info fields and new iterator.
1583 (btrace_func_history_src_line): Rename to ...
1584 (btrace_call_history_src_line): ...this. Use new btrace
1586 (btrace_func_history): Rename to ...
1587 (btrace_call_history): ...this. Use new btrace thread info
1588 fields and new iterator.
1589 (record_btrace_call_history, record_btrace_call_history_range):
1590 Use new btrace thread info fields and new iterator.
1592 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1594 * frame.h (frame_id_build_unavailable_stack_special): New.
1595 * frame.c (frame_id_build_unavailable_stack_special): New.
1597 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1599 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
1600 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
1601 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
1603 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
1604 (i386_insn_is_jump, i386_jmp_p): New.
1605 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
1606 insn_is_jump to gdbarch.
1607 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
1608 * gdbarch.h: Regenerated.
1609 * gdbarch.c: Regenerated.
1610 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
1611 (default_insn_is_jump): New.
1612 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
1613 (default_insn_is_jump): New.
1615 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1617 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
1619 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
1620 (btrace_read_type) <btrace_read_new>: Change to ...
1621 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
1623 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1625 * common/linux-btrace.c (linux_read_btrace): Free trace from
1628 2014-01-15 Doug Evans <dje@google.com>
1630 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
1633 2014-01-15 Tom Tromey <tromey@redhat.com>
1635 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
1636 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
1637 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
1638 (set_objfile_main_name): New function.
1639 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
1640 language_of_main>: New fields.
1641 (set_objfile_main_name): Declare.
1642 * symtab.c (find_main_name): Loop over objfiles to find the main
1644 (set_main_name): Now static.
1645 (get_main_info): Add comment.
1646 * symtab.h (set_main_name): Don't declare.
1648 2014-01-15 Tom Tromey <tromey@redhat.com>
1650 * symtab.c (main_progspace_key): New global.
1651 (struct main_info): New.
1652 (name_of_main, language_of_main): Remove.
1653 (get_main_info, main_info_cleanup): New function.
1654 (set_main_name, main_name, main_language): Use get_main_info.
1655 (_initialize_symtab): Initialize main_progspace_key.
1657 2014-01-15 Tom Tromey <tromey@redhat.com>
1659 * dbxread.c (process_one_symbol): Update.
1660 * dwarf2read.c (read_partial_die): Update.
1661 * symfile.c (set_initial_language): Call main_language.
1662 * symtab.c (language_of_main): Now static.
1663 (set_main_name): Add 'lang' parameter.
1664 (find_main_name): Update.
1665 (main_language): New function.
1666 (symtab_observer_executable_changed): Update.
1667 * symtab.h (set_main_name): Update.
1668 (language_of_main): Remove.
1669 (main_language): Declare.
1671 2014-01-15 Tom Tromey <tromey@redhat.com>
1673 * symfile.c (init_entry_point_info): Use new "initialized" field.
1675 * objfiles.h (struct entry_point) <initialized>: New field.
1676 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
1677 (struct objfile) <ei>: ...here. Remove.
1678 * objfiles.c (entry_point_address_query): Update.
1680 2014-01-15 Tom Tromey <tromey@redhat.com>
1682 * objfiles.c (entry_point_address_query): Relocate entry point
1684 (objfile_relocate1): Do not relocate entry point address.
1685 * objfiles.h (struct entry_info) <entry_point>: Update comment.
1686 <the_bfd_section_index>: New field.
1687 * symfile.c (init_entry_point_info): Find the entry point's
1690 2014-01-15 Tom Tromey <tromey@redhat.com>
1692 * solib-frv.c (enable_break): Use entry_point_address_query.
1694 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1696 * NEWS: Add note on improved process record-replay on
1697 arm*-linux* targets.
1699 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1701 * arm-tdep.c (enum arm_record_result): New enum.
1702 (arm_record_unsupported_insn): New function.
1703 (arm_record_coproc_data_proc): Removed.
1704 (thumb2_record_ld_st_multiple): New function.
1705 (thumb2_record_ld_st_dual_ex_tbb): New function.
1706 (thumb2_record_data_proc_sreg_mimm): New function.
1707 (thumb2_record_ps_dest_generic): New function.
1708 (thumb2_record_branch_misc_cntrl): New function.
1709 (thumb2_record_str_single_data): New function.
1710 (thumb2_record_ld_mem_hints): New function.
1711 (thumb2_record_ld_word): New function.
1712 (thumb2_record_lmul_lmla_div): New function.
1713 (thumb2_record_decode_insn_handler): New function.
1714 (decode_insn): Add thumb32 instruction handlers.
1716 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1718 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
1719 (struct arm_linux_record_tdep): Declare.
1720 (arm_canonicalize_syscall): New function.
1721 (arm_all_but_pc_registers_record): New function.
1722 (arm_linux_syscall_record): New function.
1723 (arm_linux_init_abi): Add syscall recording constructs.
1724 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
1725 decoding. (arm_record_coproc_data_proc): Update arm syscall
1727 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
1728 <arm_syscall_record>: New field.
1729 * configure.tgt (arm*-*-linux*): Add linux-record.o to
1732 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1734 * arm-tdep.c (thumb_record_misc): Update to use sp as base
1735 register for push instruction recording.
1737 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1739 * arm-tdep.c (thumb_record_misc): Update to correct logical
1740 error while recording ldm, ldmia and pop instructions.
1742 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1744 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
1746 2014-01-15 Pedro Alves <palves@redhat.com>
1748 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
1749 (go32_resume, go32_fetch_registers, store_register)
1750 (go32_store_registers, go32_prepare_to_store)
1751 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
1752 (go32_create_inferior, go32_can_run, go32_terminal_init)
1753 (go32_terminal_inferior, go32_terminal_ours): Delete forward
1756 2014-01-15 Tom Tromey <tromey@redhat.com>
1758 * target.h (async_callback_ftype): New typedef.
1759 (struct target_ops) <to_async>: Use it.
1761 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1763 * python/py-value.c (get_field_type): Remove unnecessary curly
1764 braces for single-statement if block.
1766 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1768 * python/py-type.c (convert_field): Add missing empty line
1771 2014-01-14 Doug Evans <dje@google.com>
1773 * symfile.h (expand_symtabs_matching): Renamed from
1774 expand_partial_symbol_names. Update prototype.
1775 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1776 * symfile.c (expand_symtabs_matching): Renamed from
1777 expand_partial_symbol_names. New args file_matcher, kind.
1778 Rename arg fun to symbol_matcher.
1779 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1780 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
1781 ada_expand_partial_symbol_name.
1782 (ada_make_symbol_completion_list): Update to call
1783 expand_symtabs_matching.
1784 (ada_add_global_exceptions): Call expand_symtabs_matching.
1785 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
1786 call map_symbol_filenames.
1787 * symtab.c (sources_info): Update to call map_symbol_filenames.
1788 (search_symbols): Call expand_symtabs_matching.
1789 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
1790 (default_make_symbol_completion_list_break_on): Update to call
1791 expand_symtabs_matching.
1792 (make_source_files_completion_list): Update to call
1793 map_symbol_filenames.
1795 2014-01-14 Doug Evans <dje@google.com>
1797 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
1798 (expand_symtabs_symbol_matcher_ftype): New typedef.
1799 (quick_symbol_functions.expand_symtabs_matching): Update to use.
1800 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1801 * symfile.c (expand_partial_symbol_names): Update to use
1802 expand_symtabs_symbol_matcher_ftype.
1803 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
1804 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1805 Arg name_matcher renamed to symbol_matcher.
1806 * psymtab.c (recursively_search_psymtabs): Update to use
1807 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
1809 (expand_symtabs_matching_via_partial): Update to use
1810 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1811 Arg name_matcher renamed to symbol_matcher.
1813 2014-01-14 Doug Evans <dje@google.com>
1815 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
1816 (map_partial_symbol_filenames): Ditto.
1817 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
1818 (map_partial_symbol_filenames): Ditto.
1819 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
1820 (map_partial_symbol_filenames): Ditto.
1821 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
1822 (map_partial_symbol_filenames): Ditto.
1823 * symtab.c: Delete #include "psymtab.h".
1825 2014-01-14 Pedro Alves <palves@redhat.com>
1826 Tom Tromey <tromey@redhat.com>
1828 * infrun.c (use_displaced_stepping): Use find_record_target
1829 instead of RECORD_IS_USED.
1830 (adjust_pc_after_break): Use record_full_is_used instead of
1832 * record-btrace.c (record_btrace_open): Call record_preopen
1833 instead of checking RECORD_IS_USED.
1834 * record-full.c (record_full_shortname)
1835 (record_full_core_shortname): New globals.
1836 (record_full_is_used): New function.
1837 (find_full_open): Call record_preopen instead of checking
1839 (init_record_full_ops): Set the target's shortname to
1840 record_full_shortname.
1841 (init_record_full_core_ops): Set the target's shortname to
1842 record_full_core_shortname.
1843 * record-full.h (record_full_is_used): Declare.
1844 * record.c (find_record_target): Make extern.
1845 (record_preopen): New function.
1846 * record.h (RECORD_IS_USED): Delete macro.
1847 (find_record_target, record_preopen): Declare functions.
1849 2014-01-14 Yao Qi <yao@codesourcery.com>
1851 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
1852 'len''s type to ULONGEST.
1853 (core_xfer_shared_libraries_aix): Likewise.
1854 * gdbarch.c, gdbarch.h: Regenerated.
1855 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
1856 Change type of 'len' to ULONGEST.
1857 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1858 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1860 2014-01-14 Yao Qi <yao@codesourcery.com>
1862 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1863 type of 'len' to ULONGEST.
1864 (linux_xfer_osdata_processgroups): Likewise.
1865 (linux_xfer_osdata_threads): Likewise.
1866 (linux_xfer_osdata_fds): Likewise.
1867 (linux_xfer_osdata_isockets): Likewise.
1868 (linux_xfer_osdata_shm): Likewise.
1869 (linux_xfer_osdata_sem): Likewise.
1870 (linux_xfer_osdata_msg): Likewise.
1871 (linux_common_xfer_osdata): Likewise.
1872 (struct osdata_type) <getter>: Likewise.
1873 * common/linux-osdata.h (linux_common_xfer_osdata): Update
1876 2014-01-14 Yao Qi <yao@codesourcery.com>
1878 * target.h (target_xfer_partial_ftype): Update.
1879 (struct target_ops) <to_xfer_partial>: Change 'len' type to
1881 * aix-thread.c (aix_thread_xfer_partial): Change type of
1882 argument 'len' to ULONGEST.
1883 * auxv.c (procfs_xfer_auxv): Likewise.
1884 (ld_so_xfer_auxv): Likewise.
1885 (memory_xfer_auxv): Likewise.
1886 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1887 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1888 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1889 * corelow.c (core_xfer_partial): Likewise.
1890 * ctf.c (ctf_xfer_partial): Likewise.
1891 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1893 (darwin_read_dyld_info): Likewise.
1894 (darwin_xfer_partial): Likewise.
1895 * exec.c (section_table_xfer_memory_partial): Likewise.
1896 (exec_xfer_partial): Likewise.
1897 * exec.h (section_table_xfer_memory_partial): Update
1899 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1900 instead of plongest.
1901 (gnu_xfer_partial): Likewise.
1902 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1903 (ia64_hpux_xfer_solib_got): Likewise.
1904 (ia64_hpux_xfer_partial): Likewise.
1905 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1906 * inf-ptrace.c (inf_ptrace_xfer_partial):
1907 * inf-ttrace.c (inf_ttrace_xfer_partial):
1908 * linux-nat.c (linux_xfer_siginfo): Likewise.
1909 (linux_nat_xfer_partial): Likewise.
1910 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1911 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1912 * monitor.c (monitor_xfer_memory): Likewise.
1913 (monitor_xfer_partial): Likewise.
1914 * procfs.c (procfs_xfer_partial): Likewise.
1915 * record-full.c (record_full_xfer_partial): Likewise.
1916 (record_full_core_xfer_partial): Likewise.
1917 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1918 instead of plongest.
1919 (gdbsim_xfer_partial): Likewise.
1920 * remote.c (remote_xfer_partial): Likewise.
1921 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1922 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1924 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1925 (rs6000_xfer_shared_libraries): Likewise.
1926 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1927 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1928 (sparc_xfer_partial): Likewise.
1929 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1930 (spu_xfer_partial): Likewise.
1931 * spu-multiarch.c (spu_xfer_partial): Likewise.
1932 * target.c (target_read_live_memory): Likewise.
1933 (memory_xfer_live_readonly_partial): Likewise.
1934 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1935 (target_xfer_partial, default_xfer_partial): Likewise.
1936 (current_xfer_partial): Likewise.
1937 * tracepoint.c (tfile_xfer_partial): Likewise.
1938 * windows-nat.c (windows_xfer_memory): Likewise. Call
1939 pulongest instead of plongest.
1940 (windows_xfer_partial): Likewise.
1941 (windows_xfer_shared_libraries): Likewise.
1943 2014-01-14 Yao Qi <yao@codesourcery.com>
1945 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1946 target_xfer_partial_ftype.
1948 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1952 * valops.c (value_struct_elt_bitpos): New function
1953 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1954 object to 'None' if the field name is an empty string ("").
1955 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1956 attribute to look for a field when 'name' is 'None'.
1957 (get_field_type): New function
1959 2014-01-13 Doug Evans <dje@google.com>
1962 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1963 (try_open_dwop_file): Ditto.
1964 * gdb_bfd.c: #include "vec.h".
1965 (bfdp): New typedef.
1966 (struct gdb_bfd_data): New member included_bfds.
1967 (gdb_bfd_unref): Unref all included bfds.
1968 (gdb_bfd_record_inclusion): New function.
1969 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1971 2014-01-13 Tom Tromey <tromey@redhat.com>
1973 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1975 2014-01-13 Tom Tromey <tromey@redhat.com>
1977 * defs.h (use_windows): Remove.
1978 * gdb.c (main): Update.
1979 * main.c (captured_main, gdb_main): Update.
1980 * main.h (struct captured_main_args) <use_windows>: Remove.
1981 * top.c (use_windows): Remove.
1983 2014-01-13 Tom Tromey <tromey@redhat.com>
1985 * defs.h (deprecated_flush_hook): Remove.
1987 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1990 * linux-thread-db.c (try_thread_db_load): Add parameter
1991 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1992 (try_thread_db_load_from_pdir_1): Move it there from here.
1993 (try_thread_db_load_from_sdir): Update caller.
1994 (try_thread_db_load_from_dir): Move it there from here.
1996 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1998 * regformats/regdat.sh: Always rewrite the register file.
2000 2014-01-13 Pedro Alves <palves@redhat.com>
2002 * Makefile.in (CHECK_HEADERS): New variable.
2003 (check-headers:): New rule.
2005 2014-01-13 Tom Tromey <tromey@redhat.com>
2007 * cli/cli-setshow.c (do_set_command): Update.
2008 * defs.h (deprecated_set_hook): Remove.
2009 * top.c (deprecated_set_hook): Remove.
2011 2014-01-13 Pedro Alves <palves@redhat.com>
2013 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
2014 the tracepoint if the PC is a pseudo-register.
2016 2014-01-13 Tom Tromey <tromey@redhat.com>
2018 * defs.h (XCALLOC): Remove.
2019 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
2020 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
2021 * dwarf2loc.c (allocate_piece_closure): Likewise.
2022 * elfread.c (elf_symfile_segments): Likewise.
2023 (elf_symfile_segments): Likewise.
2024 * gdbtypes.c (copy_type_recursive): Likewise.
2025 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
2026 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
2027 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
2029 * mt-tdep.c (mt_gdbarch_init): Likewise.
2030 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
2032 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
2033 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
2034 * registry.c (registry_alloc_data): Likewise.
2035 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
2036 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
2037 * serial.c (serial_fdopen_ops): Likewise.
2038 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
2040 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
2041 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
2044 2014-01-13 Tom Tromey <tromey@redhat.com>
2046 * defs.h (XMALLOC): Remove.
2047 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
2048 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
2049 * cli-out.c (struct ui_out *): Likewise.
2050 * cli/cli-dump.c (add_dump_command): Likewise.
2051 (add_dump_command): Likewise.
2052 * complaints.c (get_complaints): Likewise.
2053 (find_complaint): Likewise.
2054 * dwarf2-frame.c (execute_cfa_program): Likewise.
2055 * dwarf2read.c (abbrev_table_read_table): Likewise.
2056 * gdbarch.sh: Likewise.
2057 * gdbarch.c: Rebuild.
2058 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
2059 * interps.c (interp_new): Likewise.
2060 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
2061 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
2062 * mi/mi-console.c (mi_console_file_new): Likewise.
2063 * mi/mi-interp.c (mi_interpreter_init): Likewise.
2064 * mi/mi-out.c (mi_out_new): Likewise.
2065 * mi/mi-parse.c (mi_parse): Likewise.
2066 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
2067 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
2068 * observer.c (xalloc_observer_list_node): Likewise.
2069 * regcache.c (regcache_xmalloc_1): Likewise.
2070 * reggroups.c (reggroup_new): Likewise.
2071 (_initialize_reggroup): Likewise.
2072 * registry.c (register_data_with_cleanup): Likewise.
2073 * remote.c (remote_notif_stop_alloc_reply): Likewise.
2074 * ser-base.c (serial_ttystate): Likewise.
2075 * ser-mingw.c (make_pipe_state): Likewise.
2076 * ser-pipe.c (pipe_open): Likewise.
2077 * serial.c (serial_open): Likewise.
2078 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
2079 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
2080 (tui_alloc_win_info): Likewise.
2081 (tui_add_content_elements): Likewise.
2082 * tui/tui-file.c (tui_file_new): Likewise.
2083 * tui/tui-out.c (tui_out_new): Likewise.
2084 * ui-file.c (mem_file_new): Likewise.
2085 * ui-out.c (push_level): Likewise.
2086 (make_cleanup_ui_out_end): Likewise.
2087 (append_header_to_list): Likewise.
2088 (ui_out_new): Likewise.
2089 * user-regs.c (user_reg_add_builtin): Likewise.
2091 2014-01-13 Tom Tromey <tromey@redhat.com>
2093 * defs.h (XZALLOC): Remove.
2094 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
2095 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
2096 (get_ada_tasks_inferior_data): Likewise.
2097 * auto-load.c (get_auto_load_pspace_data): Likewise.
2098 * auxv.c (get_auxv_inferior_data): Likewise.
2099 * bfd-target.c (target_bfd_reopen): Likewise.
2100 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
2101 (deprecated_insert_raw_breakpoint): Likewise.
2102 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
2103 * corelow.c (core_open): Likewise.
2104 * darwin-nat.c (darwin_check_new_threads): Likewise.
2105 (darwin_attach_pid): Likewise.
2106 * dummy-frame.c (dummy_frame_push): Likewise.
2107 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
2108 * dwarf2loc.c (allocate_piece_closure): Likewise.
2109 * elfread.c (elf_symfile_segments): Likewise.
2110 * eval.c (ptrmath_type_p): Likewise.
2111 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
2112 * gdbtypes.c (alloc_type_arch): Likewise.
2113 (alloc_type_instance): Likewise.
2114 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
2115 * inf-child.c (inf_child_can_use_agent): Likewise.
2116 * inflow.c (get_inflow_inferior_data): Likewise.
2117 * infrun.c (save_infcall_suspend_state): Likewise.
2118 * jit.c (jit_reader_load): Likewise.
2119 (get_jit_objfile_data): Likewise.
2120 (get_jit_program_space_data): Likewise.
2121 (jit_object_open_impl): Likewise.
2122 (jit_symtab_open_impl): Likewise.
2123 (jit_block_open_impl): Likewise.
2124 (jit_frame_sniffer): Likewise.
2125 * linux-fork.c (add_fork): Likewise.
2126 * maint.c (make_command_stats_cleanup): Likewise.
2127 * objfiles.c (get_objfile_pspace_data): Likewise.
2128 * opencl-lang.c (struct lval_closure): Likewise.
2129 * osdata.c (osdata_start_osdata): Likewise.
2130 * progspace.c (new_address_space): Likewise.
2131 (add_program_space): Likewise.
2132 * remote-sim.c (get_sim_inferior_data): Likewise.
2133 * sh-tdep.c (sh_gdbarch_init): Likewise.
2134 * skip.c (Ignore): Likewise.
2135 (skip_delete_command): Likewise.
2136 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
2137 (library_list_start_library): Likewise.
2138 (solib_aix_current_sos): Likewise.
2139 * solib-darwin.c (get_darwin_info): Likewise.
2140 (darwin_current_sos): Likewise.
2141 * solib-dsbt.c (get_dsbt_info): Likewise.
2142 * solib-ia64-hpux.c (new_so_list): Likewise.
2143 (ia64_hpux_get_solib_linkage_addr): Likewise.
2144 * solib-spu.c (append_ocl_sos): Likewise.
2145 (spu_current_sos): Likewise.
2146 * solib-svr4.c (get_svr4_info): Likewise.
2147 (svr4_keep_data_in_core): Likewise.
2148 (library_list_start_library): Likewise.
2149 (svr4_default_sos): Likewise.
2150 (svr4_read_so_list): Likewise.
2151 * solib-target.c (library_list_start_library): Likewise.
2152 (solib_target_current_sos): Likewise.
2153 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
2154 * symfile-debug.c (install_symfile_debug_logging): Likewise.
2155 * symfile.c (default_symfile_segments): Likewise.
2156 * target-descriptions.c (tdesc_data_init): Likewise.
2157 (tdesc_create_reg): Likewise.
2158 (struct tdesc_type *): Likewise.
2159 (tdesc_create_vector): Likewise.
2160 (tdesc_set_struct_size): Likewise.
2161 (struct tdesc_type *): Likewise.
2162 (tdesc_free_feature): Likewise.
2163 (tdesc_create_feature): Likewise.
2164 * windows-nat.c (windows_add_thread): Likewise.
2165 (windows_make_so): Likewise.
2166 * xml-support.c (gdb_xml_body_text): Likewise.
2167 (gdb_xml_create_parser_and_cleanup): Likewise.
2168 (xml_process_xincludes): Likewise.
2169 * xml-syscall.c (allocate_syscalls_info): Likewise.
2170 (syscall_create_syscall_desc): Likewise.
2172 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
2174 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
2175 function, with code from i386_stap_parse_special_token.
2176 (i386_stap_parse_special_token_three_arg_disp): Likewise.
2177 (i386_stap_parse_special_token): Move code to the two functions
2180 2014-01-09 Pedro Alves <palves@redhat.com>
2181 Hui Zhu <hui@codesourcery.com>
2184 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
2185 bp_err_string. Don't mark the location shlib_disabled if the
2186 error thrown wasn't a generic or memory error. Catch errors
2187 thrown while inserting breakpoints in overlayed code. Output
2188 error message of software breakpoints.
2189 * remote.c (remote_insert_breakpoint): If this breakpoint has
2190 target-side commands but this stub doesn't support Z0 packets,
2191 throw NOT_SUPPORTED_ERROR error.
2192 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
2193 * target.h (target_insert_breakpoint): Extend comment.
2194 (target_insert_hw_breakpoint): Add comment.
2196 2014-01-08 Pedro Alves <palves@redhat.com>
2198 * remote.c (remote_add_thread): Add threads silently if starting
2200 (remote_notice_new_inferior): If in all-stop, and starting up,
2201 don't call notice_new_inferior.
2202 (get_current_thread): New function, factored out from ...
2203 (add_current_inferior_and_thread): ... this. Adjust.
2204 (remote_start_remote) <all-stop>: Fetch the thread list. If we
2205 found any thread, then select the remote's current thread as GDB's
2208 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2210 * NEWS: Create a new section for the next release branch.
2211 Rename the section of the current branch, now that it has
2214 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2216 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
2217 * version.in: Bump version to 7.7.50.DATE-cvs.
2219 2014-01-08 Yao Qi <yao@codesourcery.com>
2221 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
2222 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
2223 (spu_xfer_partial): Cast 'buf' to 'const char *'.
2225 2014-01-08 Yao Qi <yao@codesourcery.com>
2227 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
2228 return value of bfd_get_filename to symbol_file_add_from_bfd.
2230 2014-01-08 Pierre Muller <muller@sourceware.org>
2233 * coff-pe-read.c (struct read_pe_section_data): Add index field.
2234 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
2235 to prim_record_mininal_symbol_and_info.
2236 (add_pe_forwarded_sym): Use known section number of forwarded symbol
2237 in call to prim_record_minimal_symbol_and_info.
2238 (read_pe_exported_syms): Set index field of section_data.
2240 2014-01-07 Andrew Pinski <apinski@cavium.com>
2242 * features/aarch64-core.xml (cpsr): Change to be 64bit.
2243 * features/aarch64.c: Regenerate.
2245 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
2247 * target.c (return_null): Define.
2248 (update_current_target): Use it instead of return_zero for
2249 functions that return a pointer.
2251 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2253 * source.c (add_path): Fix check for duplicated paths in the previously
2256 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
2258 * ada-lang.c: Remove duplicated include statements.
2259 * alphabsd-nat.c: Ditto.
2260 * amd64-darwin-tdep.c: Ditto.
2261 * amd64fbsd-nat.c: Ditto.
2262 * auto-load.c: Ditto.
2264 * breakpoint.c: Ditto.
2266 * fork-child.c: Ditto.
2267 * gdb_usleep.c: Ditto.
2268 * i386-darwin-tdep.c: Ditto.
2269 * i386fbsd-nat.c: Ditto.
2271 * inferior.c: Ditto.
2273 * linux-nat.c: Ditto.
2274 * linux-tdep.c: Ditto.
2275 * m68kbsd-nat.c: Ditto.
2276 * m68klinux-nat.c: Ditto.
2277 * microblaze-tdep.c: Ditto.
2278 * mips-linux-tdep.c: Ditto.
2279 * mn10300-tdep.c: Ditto.
2280 * nto-tdep.c: Ditto.
2281 * opencl-lang.c: Ditto.
2283 * printcmd.c: Ditto.
2284 * regcache.c: Ditto.
2285 * remote-m32r-sdi.c: Ditto.
2289 * tilegx-linux-nat.c: Ditto.
2290 * tilegx-tdep.c: Ditto.
2291 * tracepoint.c: Ditto.
2293 * vaxbsd-nat.c: Ditto.
2294 * windows-nat.c: Ditto.
2295 * xtensa-tdep.c: Ditto.
2297 2014-01-07 Yao Qi <yao@codesourcery.com>
2299 * spu-linux-nat.c (_initialize_spu_nat): Declare.
2301 2014-01-07 Yao Qi <yao@codesourcery.com>
2302 Joel Brobecker <brobecker@adacore.com>
2304 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
2305 (pdc_write_regs): Likewise.
2306 (fetch_regs_kernel_thread): Likewise.
2307 (store_regs_kernel_thread): Likewise.
2309 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2311 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
2312 tagged type objects to their actual type.
2314 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2316 * ada-valprint.c (print_field_values): Add "language" parameter.
2317 Update calls to print_field_values and print_variant_part.
2318 Pass new parameter "language" in call to val_print instead
2319 of "current_language". Replace call to ada_val_print by call
2321 (print_variant_part): Add "language" parameter.
2322 (ada_val_print_struct_union): Update call to print_field_values.
2324 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2326 * ada-valprint.c (ui_memcpy): Delete.
2327 (ada_print_floating): Update documentation. Add empty line
2328 between between function documentation and implementation.
2329 Delete variable "buffer". Use ui_file_xstrdup in place of
2330 ui_file_put. Minor adjustments following this change.
2332 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2334 * ada-valprint.c (ada_val_print_string): New function,
2335 extracted from ada_val_print_array.
2336 (ada_val_print_array): Replace extracted code by call
2337 to ada_val_print_string followed by a return. Move
2338 "else" branch to the function's top block.
2340 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2342 * ada-valprint.c (ada_val_print_array): Move implementation
2343 down. Rename parameter "offset" and "val" into "offset_aligned"
2344 and "original_value" respectively. Add parameter "offset".
2346 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2348 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
2349 re-organizing the code. Change the "???" message printed
2350 when target type is a TYPE_CODE_UNDEF into
2351 "<ref to undefined type>".
2353 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2355 * ada-valprint.c (print_record): Delete, implementation inlined...
2356 (ada_val_print_struct_union): ... here. Remove call to
2357 ada_check_typedef in inlined implementation.
2359 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2361 * ada-valprint.c (ada_val_print_gnat_array): New function,
2362 extracted from ada_val_print_1;
2363 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
2364 (ada_val_print_flt, ada_val_print_struct_union)
2365 (ada_val_print_ref): Likewise.
2366 (ada_val_print_1): Delete variables i and elttype.
2367 Replace extracted-out code by call to corresponding
2370 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2372 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
2374 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2376 * ada-valprint.c (ada_val_print_1): Replace calls to
2377 ada_val_print_1 by calls to val_print.
2379 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2381 * ada-valprint.c (ada_val_print_1): Add parameter "language".
2382 Update calls to self accordingly. Replace calls to c_val_print
2383 by calls to val_print.
2385 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2387 * ada-valprint.c (print_record): Delete declaration.
2388 (adjust_type_signedness, ada_val_print_1): Likewise.
2389 (ada_val_print): Move function implementation down.
2390 (print_variant_part, print_field_values, print_record):
2391 Move function implementation up.
2393 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2395 * python/py-type.c (typy_get_name): New function.
2396 (type_object_getset): Add entry for attribute "name".
2397 * NEWS: Add entry mentioning this new attribute.
2399 2014-01-07 Yao Qi <yao@codesourcery.com>
2401 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
2404 2014-01-07 Yao Qi <yao@codesourcery.com>
2406 * gnu-nat.c (info_port_rights): Add qualifier const to
2409 2014-01-07 Yao Qi <yao@codesourcery.com>
2411 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
2413 2014-01-07 Yao Qi <yao@codesourcery.com>
2415 * gnu-nat.c (make_inf) Update declaration.
2416 (make_inf): Make it static.
2417 (inf_set_traced): Likewise.
2418 (inf_port_to_thread, inf_task_died_status): Likewise.
2420 2014-01-07 Yao Qi <yao@codesourcery.com>
2422 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
2424 2014-01-07 Yao Qi <yao@codesourcery.com>
2426 * gnu-nat.c (_initialize_gnu_nat): Declare.
2428 2014-01-07 Yao Qi <yao@codesourcery.com>
2430 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
2432 (struct gdbarch_info) <byte_order>: Change type to
2434 <byte_order_for_code>: Likewise.
2435 * gdbarch.c, gdbarch.h: Regenerated.
2437 2014-01-06 Sasha Smundak <asmundak@google.com>
2439 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
2441 2014-01-06 Tom Tromey <tromey@redhat.com>
2443 * doublest.c (convert_doublest_to_floatformat): Use const, not
2445 * somread.c (som_symtab_read): Likewise.
2447 2014-01-07 Hui Zhu <hui@codesourcery.com>
2449 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
2450 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
2451 (gdb_bfd_fopen): Ditto.
2452 (gdb_bfd_openr): Ditto.
2453 (gdb_bfd_openw): Ditto.
2454 (gdb_bfd_openr_iovec): Ditto.
2455 (gdb_bfd_fdopenr): Ditto.
2456 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
2457 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
2459 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
2461 * symfile-mem.c (symbol_file_add_from_memory): Removed
2462 gdb_bfd_stash_filename.
2464 2014-01-03 Doug Evans <dje@google.com>
2466 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
2469 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2471 Update year range in copyright notice of all files.
2473 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2475 * top.c (print_gdb_version): Set copyright year to 2014.
2477 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2479 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
2481 For older changes see ChangeLog-2013.
2487 version-control: never