1 2010-08-11 Phil Muldoon <pmuldoon@redhat.com>
2 Thiago Jung Bauermann <bauerman@br.ibm.com>
3 Tom Tromey <tromey@redhat.com>
5 * python/python.c (gdbpy_solib_address): New function.
6 (gdbpy_decode_line): Likewise.
8 2010-08-10 Tom Tromey <tromey@redhat.com>
10 Revert gdb-add-index addition:
11 * Makefile.in (install-only): Don't install gdb-add-index.
12 * gdb-add-index.sh: Remove.
14 2010-08-09 Kevin Buettner <kevinb@redhat.com>
16 * remote-sim.c (gdbsim_xfer_inferior_memory): Replace
17 `target_has_execution' check with `to_has_memory' check.
18 (gdbsim_has_all_memory, gdbsim_has_memory): New functions.
19 (init_gdbsym_ops): Initialize relevant fields of `gdbsim_ops'
20 with `gdbsim_has_all_memory' and `gdbsim_has_memory'.
22 2010-08-09 Kevin Buettner <kevinb@redhat.com>
24 * remote-sim.c (program_loaded, gdbsim_desc, remote_sim_ptid)
25 (resume_siggnal, resume_step): Move these static globals...
26 (struct sim_inferior_data): ...into this new struct.
27 (sim_inferior_data_key, next_pid, sim_argv, gdbsim_is_open):
29 (gdb_callback, callbacks_initialized): Move these globals to
30 a point earlier in the file.
31 (check_for_duplicate_sim_descriptor, get_sim_inferior_data)
32 (get_sim_inferior_data_by_ptid, sim_inferior_data_cleanup)
33 (gdbsim_close_inferior, gdbsim_resume_inferior)
34 (gdbsim_stop_inferior): New functions.
35 (SIM_INSTANCE_NOT_NEEDED, SIM_INSTANCE_NEEDED, INITIAL_PID):
37 (gdbsim_fetch_register, gdbsim_store_register, gdbsim_load)
38 (gdbsim_create_inferior, gdbsim_open, gdbsim_close, gdbsim_resume)
39 (gdbsim_stop, gdbsim_cntrl_c, gdbsim_wait)
40 (gdbsim_xfer_inferior_memory, gdbsim_files_info)
41 (gdbsim_mourn_inferior, simulator_command, gdbsim_thread_alive,
42 (gdbsim_pid_to_str): Invoke `get_sim_inferior_data' to set
43 new local variable `sim_data' in each of these functions. Use
44 `sim_data' to reference former globals `program_loaded',
45 `gdbsim_desc', `remote_sim_ptid', `resume_siggnal', and
47 (gdbsim_open): Remove local variable `argv'. Put results of call
48 to `gdb_buildargv' in `sim_argv' rather than in `argv'. Don't
49 make a cleanup for it. Free it though when a sim instance cannot
51 (gdbsim_close): Free sim_argv and null it out as appropriate.
52 Close sim instances in all inferiors.
53 (gdbsim_cntrl_c): Stop all inferiors.
55 (_initialize_remote_sim): Initialize `sim_inferior_data_key'.
57 2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
59 * dwarf2read.c (new_symbol): Add symbol to variable list at end of
60 function after symbol construction is complete.
61 Do the same for template symbol addition to template_symbols list.
63 2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
65 * symtab.c (symbol_get_demangled_name): Remove assertion and
66 return NULL when language_specific.cplus_specific is not initialized.
67 * stabsread.c (define_symbol): Set the name before calling
68 cp_scan_for_anonymous_namespaces.
70 2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
72 * symtab.h: Renamed SYMBOL_INIT_LANGUAGE_SPECIFIC to
74 (symbol_init_language_specific): Renamed to symbol_set_language.
75 * symtab.c (symbol_init_language_specific): Removed redundant check
77 Renamed to symbol_set_language.
78 * stabsread.c (define_symbol): Updated.
79 (read_enum_type): Updated
80 * psymtab.c (add_psymbol_to_bcache): Updated.
81 * minsyms.c (install_minimal_symbols): Updated.
82 * coffread.c (process_coff_symbol): SYMBOL_SET_LANGUAGE instead of
83 SYMBOL_LANGUAGE to set the language.
84 * minsyms.c (prim_record_minimal_symbol_full): Ditto.
85 * mdebugread.c (new_symbol): Ditto.
86 * cp-namespace.c (check_one_possible_namespace_symbol): Ditto.
87 * dwarf2read.c (new_symbol_full): Ditto.
88 * jv-lang.c (add_class_symbol): Ditto.
90 2010-08-07 Jan Kratochvil <jan.kratochvil@redhat.com>
92 * defs.h (make_cleanup_restore_uinteger, make_cleanup_restore_ui_file)
93 (make_cleanup_restore_page_info)
94 (set_batch_flag_and_make_cleanup_restore_page_info): New declarations.
95 * gdbcmd.h (execute_command_to_string): New declaration.
96 * python/python.c (struct restore_ui_file_closure, restore_ui_file)
97 (make_cleanup_restore_ui_file): Move to utils.c
98 (execute_gdb_command) <to_string>: Move ...
99 * top.c (execute_command_to_string): ... here. Call
100 set_batch_flag_and_make_cleanup_restore_page_info.
101 * utils.c (make_cleanup_restore_integer): New source file blank line.
102 (make_cleanup_restore_uinteger): New.
103 (struct restore_ui_file_closure, do_restore_ui_file)
104 (make_cleanup_restore_ui_file): Move here from python/python.c.
105 (init_page_info) <batch_flag>
106 (do_restore_page_info_cleanup, make_cleanup_restore_page_info)
107 (set_batch_flag_and_make_cleanup_restore_page_info): New.
109 2010-08-06 Maciej W. Rozycki <macro@codesourcery.com>
111 * thread.c (add_thread_silent): Use null_ptid instead of
112 minus_one_ptid while getting rid of stale inferior_ptid.
114 2010-08-06 Corinna Vinschen <vinschen@redhat.com>
116 * dwarf2-frame.c (struct dwarf2_cie): Add ptr_size member.
117 Throughout, call read_encoded_value with ptr_size rather than addr_size.
118 (decode_frame_entry_1): Remove redundant setting of
119 addr_size. Call gdbarch_dwarf2_addr_size rather than gdbarch_ptr_bit
120 to determine addr_size in Dwarf versions < 4. Set ptr_size dependent
121 on examined frame section. Add comment to explain why.
122 * gdbarch.sh (dwarf2_addr_size): Define as variable. Add lengthy
123 comment to explain usage.
124 * gdbarch.c: Regenerate.
125 * gdbarch.h: Regenerate.
127 * xstormy16-tdep.c (xstormy16_gdbarch_init): Set dwarf2_addr_size to 4.
129 2010-08-06 Jan Kratochvil <jan.kratochvil@redhat.com>
132 * varobj.c (varobj_create): Move variables fi, old_fi and block to
135 2010-08-05 Pedro Alves <pedro@codesourcery.com>
137 * configure.tgt (alpha*-*-linux*, am33_2.0*-*-linux*, frv-*-*)
138 (hppa*-*-linux*, ia64-*-linux*, m32r*-*-linux*, m68*-*-linux*)
139 (microblaze*-linux-*, mips*-*-linux*, sh*-*-linux*)
140 (sparc-*-linux*, sparc64-*-linux*, xtensa*-*-linux*): Add
141 linux-tdep.o to gdb_target_obs.
143 2010-08-05 Marc Khouzam <marc.khouzam@ericsson.com>
145 * mi/mi-main.c (mi_cmd_remove_inferior): Properly access first
148 2010-08-05 Hui Zhu <teawater@gmail.com>
150 * mips-linux-tdep.c(regset.h): New include.
151 (mips_supply_gregset_wrapper, mips_fill_gregset_wrapper,
152 mips_supply_fpregset_wrapper, mips_fill_fpregset_wrapper,
153 mips64_supply_gregset_wrapper, mips64_fill_gregset_wrapper,
154 mips64_supply_fpregset_wrapper, mips64_fill_fpregset_wrapper,
155 mips_linux_regset_from_core_section): New functions.
156 (fetch_core_registers, regset_core_fns): Deleted.
157 (mips_linux_init_abi): Add mips_linux_regset_from_core_section.
158 Deleted regset_core_fns.
159 * mips-tdep.c(mips_gdbarch_init): Initialize tdep->gregset,
160 tdep->gregset64, tdep->fpregset and tdep->fpregset64.
161 * mips-tdep.h(gdbarch_tdep): Add gregset, gregset64, fpregset
164 2010-08-04 Pedro Alves <pedro@codesourcery.com>
166 * s390-tdep.c: Include linux-tdep.h.
167 (s390_gdbarch_init): Call linux_init_abi.
169 2010-08-04 Pedro Alves <pedro@codesourcery.com>
171 * corelow.c (core_pid_to_str): Default to using normal_pid_to_str
172 instead of printing "Thread" here.
173 * linux-tdep.c: Include inferior.h.
174 (linux_core_pid_to_str): New.
175 (linux_init_abi): New.
176 * linux-tdep.h (linux_init_abi): Declare.
177 * alpha-linux-tdep.c: Include linux-tdep.h.
178 (alpha_linux_init_abi): Call linux_init_abi.
179 * amd64-linux-tdep.c (amd64_linux_init_abi): Call linux_init_abi.
180 * arm-linux-tdep.c (arm_linux_init_abi): Call linux_init_abi.
181 * frv-linux-tdep.c: Include linux-tdep.h
182 (frv_linux_init_abi): Call linux_init_abi.
183 * hppa-linux-tdep.c: Include linux-tdep.h
184 (hppa_linux_init_abi): Call linux_init_abi.
185 * i386-linux-tdep.c (i386_linux_init_abi): Call linux_init_abi.
186 * ia64-linux-tdep.c: Include linux-tdep.h.
187 (ia64_linux_init_abi): Call linux_init_abi.
188 * m32r-linux-tdep.c: Include linux-tdep.h.
189 (m32r_linux_init_abi): Call linux_init_abi.
190 * m68klinux-tdep.c: Include linux-tdep.h.
191 (m68k_linux_init_abi): Call linux_init_abi.
192 * microblaze-linux-tdep.c: Include linux-tdep.h.
193 (microblaze_linux_init_abi): Call linux_init_abi.
194 * mips-linux-tdep.c: Include linux-tdep.h.
195 (mips_linux_init_abi): Call linux_init_abi.
196 * mn10300-linux-tdep.c: Include linux-tdep.h.
197 (am33_linux_init_osabi): Call linux_init_abi. Rename the
198 'gdbinfo' parameter to 'info'.
199 * ppc-linux-tdep.c: Include linux-tdep.h.
200 (ppc_linux_init_abi): Call linux_init_abi.
201 * sh-linux-tdep.c: Include linux-tdep.h.
202 (sh_linux_init_abi): Call linux_init_abi.
203 * sparc-linux-tdep.c: Include linux-tdep.h.
204 (sparc32_linux_init_abi): Call linux_init_abi.
205 * sparc64-linux-tdep.c: Include linux-tdep.h.
206 (sparc64_linux_init_abi): Call linux_init_abi.
207 * xtensa-linux-tdep.c: Include linux-tdep.h.
208 (xtensa_linux_init_abi): Call linux_init_abi.
209 * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): New.
210 (i386_cygwin_init_abi): Install it as gdbarch_core_pid_to_str
213 2010-08-03 Doug Evans <dje@google.com>
215 * breakpoint.c (bpdisp_text): Constify bpdisps.
216 * solib-svr4.c (solib_break_names): Constify.
217 (bkpt_names, main_name_list): Constify.
218 (match_main): Constify soname arg.
219 (bfd_lookup_symbol): Remove unnecessary forward decl.
220 Constify symname arg.
221 (enable_break): Constify bkpt_namep.
222 * symtab.c (search_symbols): Constify types, types2, types3, types4.
223 (symtab_symbol_info): Constify classnames.
225 2010-08-03 Phil Muldoon <pmuldoon@redhat.com>
227 * NEWS: Document Python value inferior function calls.
229 2010-08-02 Doug Evans <dje@google.com>
231 * dwarf2read.c (dwarf_attr_name): Add DW_AT_GNU_odr_signature.
233 2010-07-31 Paul Pluzhnikov <ppluzhnikov@google.com>
235 * linux-thread-db.c (libthread_db_debug): New variable.
236 (thread_db_find_new_threads_silently): Control verbosity with it.
237 (try_thread_db_load_1, try_thread_db_load): Likewise.
238 (find_new_threads_once): Likewise.
239 (_initialize_thread_db): Set/show it.
241 2010-07-31 Jan Kratochvil <jan.kratochvil@redhat.com>
243 * common/signals.c (signals): Move the content to signals.def.
244 Include it. Remove the INDENT comments.
246 2010-07-30 Tom Tromey <tromey@redhat.com>
248 * Makefile.in (install-only): Install gdb-add-index.
249 * gdb-add-index.sh: New file.
251 2010-07-31 Renquan Cheng <crq@gcc.gnu.org>
253 * MAINTAINERS: Add myself for write after approval privileges.
255 2010-07-30 Jan Kratochvil <jan.kratochvil@redhat.com>
257 * symfile.c (addr_section_name): New function.
258 (addrs_section_compar): Use it.
259 (addr_info_make_relative): Use it. Move variable sect_name into a more
260 inner block. Make ".dynbss" and ".sdynbss" checks more strict.
262 2010-07-30 Tom Tromey <tromey@redhat.com>
264 * configure: Rebuild.
265 * configure.ac: Add missing case for Python 2.7.
267 2010-07-29 DJ Delorie <dj@redhat.com>
269 * rx-tdep.c (rx_analyze_prologue): Don't require branches to have
272 2010-07-29 Pedro Alves <pedro@codesourcery.com>
274 * PROBLEMS: Remove mention of all problems.
276 2010-07-28 Pedro Alves <pedro@codesourcery.com>
279 * configure.ac: Check for wresize.
280 * configure, config.in: Regenerate.
281 * tui/tui-win.c (make_visible_with_new_height): Wrap wresize call
284 2010-07-28 Tom Tromey <tromey@redhat.com>
287 * python/py-type.c (typy_legacy_template_argument): New function,
288 extracted from typy_template_argument.
289 (typy_template_argument): Use TYPE_TEMPLATE_ARGUMENT. Return a
292 2010-07-28 Oleg Nesterov <oleg@redhat.com>
294 * remote.c (readchar): Call pop_target in case of SERIAL_ERROR.
296 2010-07-27 Tom Tromey <tromey@redhat.com>
298 * dwarf2read.c (dwarf2_const_value_data): Never sign extend.
300 2010-07-28 Daniel Jacobowitz <dan@codesourcery.com>
302 * dwarf2read.c (read_subroutine_type): Improve THIS detection,
303 handling DW_AT_object_pointer, and workaround GCC PR 43053.
305 2010-07-28 Tom Tromey <tromey@redhat.com>
307 * Makefile.in (HFILES_NO_SRCDIR): Remove link-warning.h.
309 2010-07-28 Joel Brobecker <brobecker@adacore.com>
311 * remote.c (remote_download_tracepoint): Add missing gettext markup.
312 * tracepoint.c (parse_static_tracepoint_marker_definition): Likewise.
314 2010-07-28 Joel Brobecker <brobecker@adacore.com>
316 * breakpoint.c (breakpoint_re_set_one): Move call to set_language
317 down, just before the block that parse the breakpoint addr_string.
319 2010-07-28 Tom Tromey <tromey@redhat.com>
322 * symfile.c (reread_symbols): Clear template_symbols.
323 * symtab.h (struct symbol) <is_cplus_template_function>: New
325 (SYMBOL_IS_CPLUS_TEMPLATE_FUNCTION): New macro.
326 (struct template_symbol): New.
327 * symtab.c (lookup_symbol_aux_local): Use
328 cp_lookup_symbol_imports_or_template.
329 * objfiles.h (struct objfile) <template_symbols>: New field.
330 * objfiles.c (relocate_one_symbol): New function.
331 (objfile_relocate1): Use it. Relocate isolated symbols.
332 * gdbtypes.h (struct cplus_struct_type) <n_template_arguments,
333 template_arguments>: New fields.
334 (TYPE_N_TEMPLATE_ARGUMENTS): New macro.
335 (TYPE_TEMPLATE_ARGUMENTS): Likewise.
336 (TYPE_TEMPLATE_ARGUMENT): Likewise.
337 (lookup_typename): Update.
338 * gdbtypes.c (lookup_typename): Constify "block" argument.
339 * dwarf2read.c: Include vec.h.
340 (symbolp): New typedef.
341 (read_func_scope): Read template arguments. Allocate a
342 template_symbol when needed.
343 (read_structure_type): Read template arguments.
344 (new_symbol_full): New function, from new_symbol. Handle
345 DW_TAG_template_type_param and DW_TAG_template_value_param.
346 (new_symbol): Rewrite as wrapper.
347 * cp-support.h (cp_lookup_symbol_imports_or_template): Declare.
348 * cp-namespace.c: Include language.h.
349 (search_symbol_list): New function.
350 (cp_lookup_symbol_imports_or_template): Likewise.
352 2010-07-28 Balazs Kezes <rlblaster@gmail.com>
354 * tui/tui-win.c (make_visible_with_new_height): Resize and move
355 the command window to the new size and position.
357 2010-07-28 Balazs Kezes <rlblaster@gmail.com>
359 * tui/tui-win.c (tui_resize_all): Update the locator's origin's
362 2010-07-28 Balazs Kezes <rlblaster@gmail.com>
364 * tui/tui-io.c (tui_handle_resize_during_io): Call tui_resize_all
365 after a detecting a resize.
366 * tui/tui-win.c (tui_resize_all): Remove tui_set_win_resized_to
369 2010-07-28 Pedro Alves <pedro@codesourcery.com>
371 * configure.ac: Check for resize_term.
372 * configure, config.in: Regenerate.
374 2010-07-27 Joel Brobecker <brobecker@adacore.com>
376 * MAINTAINERS (Write After Approval): Reorder a couple of entries.
378 2010-07-27 Daniel Jacobowitz <dan@codesourcery.com>
380 * dwarf2read.c (read_string): Rename to ...
381 (read_direct_string): ... this.
382 (skip_one_die, read_attribute_value, dwarf_decode_line_header)
383 (dwarf_decode_lines, dwarf_decode_macros): Adjust.
385 2010-07-27 Jan Kratochvil <jan.kratochvil@redhat.com>
387 * linux-nat.c (linux_nat_lp_status_is_event): New function.
388 (count_events_callback, select_event_lwp_callback)
389 (cancel_breakpoints_callback, linux_nat_wait_1): Use it.
391 2010-07-27 Jan Kratochvil <jan.kratochvil@redhat.com>
393 * ia64-linux-nat.c (ia64_linux_status_is_event): New function.
394 (_initialize_ia64_linux_nat): Install it.
395 * linux-nat.c (sigtrap_is_event, linux_nat_status_is_event)
396 (linux_nat_set_status_is_event): New.
397 (stop_wait_callback, count_events_callback, select_event_lwp_callback)
398 cancel_breakpoints_callback, linux_nat_filter_event)
399 (linux_nat_wait_1): Use linux_nat_status_is_event.
400 * linux-nat.h (linux_nat_set_status_is_event): New prototype.
402 2010-07-27 Tom Tromey <tromey@redhat.com>
404 * NEWS: Mention labels, .gdb_index.
406 2010-07-28 CHENG Renquan <rqcheng@smu.edu.sg>
408 * cli/cli-cmds.c (disassemble_command): Add support of disassemble
409 "start,+length" form of arguments.
410 * NEWS: Add "Changed commands" (disassemble) section for "Changes
411 since GDB 7.1"; and merge two separated paragraphs of disassemble
412 description in "Changes in GDB 7.0".
414 2010-07-27 Jan Kratochvil <jan.kratochvil@redhat.com>
416 * top.c (input_from_terminal_p): Return 0 on BATCH_FLAG.
417 * utils.c (defaulted_query): Do not explicitly check for BATCH_FLAG.
418 (fputs_maybe_filtered): Do not do filtering also on
419 ! INPUT_FROM_TERMINAL_P.
421 2010-07-27 Joel Brobecker <brobecker@adacore.com>
423 * dwarf2read.c (dw2_find_pc_sect_symtab): Remove trailing newline
426 2010-07-27 Phil Muldoon <pmuldoon@redhat.com>
428 * python/py-value.c (valpy_call): New Function.
430 2010-07-27 Ken Werner <ken.werner@de.ibm.com>
432 * dwarf2read.c (dwarf2_read_index): Initialize the types_list and
433 types_list_elements variables.
435 2010-07-26 Tom Tromey <tromey@redhat.com>
437 * dwarf2loc.c (locexpr_describe_location_piece): Also recognize
438 TLS with DW_OP_const4u or DW_OP_const8u.
440 2010-07-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
442 * ppc-linux-nat.c (store_vsx_register): Use PTRACE_GETVSXREGS to get
443 VSX registers contents.
445 2010-07-26 Jerome Guitton <guitton@adacore.com>
447 * dwarf2read.c (add_partial_symbol): Do not add a global variable if
448 its adress is null. Add comment to explain why.
451 2010-07-25 Jan Kratochvil <jan.kratochvil@redhat.com>
453 * linux-nat.c (linux_nat_do_thread_registers): Convert STOP_SIGNAL to
454 the host signal first.
456 2010-07-23 Tom Tromey <tromey@redhat.com>
458 * dwarf2read.c (struct dwarf2_per_objfile) <n_type_comp_units,
459 type_comp_units>: New fields.
460 (dw2_get_cu): New function.
461 (create_cus_from_index): Remove unused argument.
462 (create_signatured_type_hash_from_index): New function.
463 (create_addrmap_from_index): Update.
464 (dwarf2_read_index): Handle version 2.
465 (dw2_find_last_source_symtab, dw2_forget_cached_source_info)
466 (dw2_lookup_symtab, dw2_do_expand_symtabs_matching)
467 (dw2_print_stats, dw2_expand_all_symtabs)
468 (dw2_expand_symtabs_with_filename, dw2_find_symbol_file)
469 (dw2_expand_symtabs_matching, dw2_map_symbol_filenames): Update.
470 (dwarf2_initialize_objfile): Call create_debug_types_hash_table.
471 (allocate_signatured_type_hash_table): New function.
472 (add_signatured_type_cu_to_list): Likewise.
473 (create_debug_types_hash_table): Use them. Set type_comp_units.
474 (read_signatured_type): Ensure section data is available.
475 (add_address_entry): Don't record empty ranges.
476 (struct signatured_type_index_data): New.
477 (write_one_signatured_type): New function.
478 (write_psymtabs_to_index): Write type CUs.
479 (save_gdb_index_command): Update comment.
480 (process_type_comp_unit): Move inititalization of
482 (create_debug_types_hash_table): ... here.
484 2010-07-23 Jan Kratochvil <jan.kratochvil@redhat.com>
486 * gdb_gcore.sh (tmpfile): Remove the variable, its initialization,
487 cleanup and generating of gdb script to it.
488 (gdb): Use redirection from /dev/null. Use --nx. Turn off pagination
489 and terminal size. Convert $tmpfile to a series of -ex-es.
491 2010-07-23 Keith Seitz <keiths@redhat.com>
493 * symtab.c (basic_lookup_transparent_type): Call pre-expand
494 hook for STATIC_BLOCK types, too.
496 2010-07-23 Keith Seitz <keiths@redhat.com>
498 * dwarf2read.c: Remove unused typedef dwarf2_cu_per_cu_data_ptr
499 and vector definition.
501 2010-07-23 Jan Kratochvil <jan.kratochvil@redhat.com>
503 * linux-nat.c (cancel_breakpoint): Remove unused forward declaration.
505 2010-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
507 * dwarf2read.c: Include completer.h.
508 (save_gdb_index_command): Use matching usage command name.
509 (_initialize_dwarf2_read): New variable c, initialize it by add_cmd.
510 Set filename_completer for it.
512 2010-07-22 Tom Tromey <tromey@redhat.com>
514 * dwarf2read.c (create_debug_types_hash_table): Set objfile on
515 type signature's per-CU data.
517 2010-07-22 Pedro Alves <pedro@codesourcery.com>
519 * NEWS: Mention target reported shared libraries support by
522 2010-07-21 Pedro Alves <pedro@codesourcery.com>
527 2010-05-21 Pierre Muller <muller@ics.u-strasbg.fr>
528 * dwarf2read.c (process_die): Also allow DW_TAG_const_type
529 and DW_TAG_volatile_type.
530 (new_symbol): Likewise.
532 2010-07-21 Sami Wagiaalla <swagiaal@redhat.com>
534 * eval.c (evaluate_subexp_standard): Disabled evaluation of C++
535 function symbols before overload resolution.
537 2010-07-21 Pedro Alves <pedro@codesourcery.com>
539 * breakpoint.c (bptype_string): New, abstracted out from
540 print_one_breakpoint_location.
541 (print_one_breakpoint_location): Adjust.
542 (breakpoint_1): Adjust the type column width dynamically.
544 2010-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
546 * symfile.c (find_separate_debug_file_by_debuglink): Remove
547 a gdb_assert call, new comment.
549 2010-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
551 * linux-nat.c (linux_handle_extended_wait): Handle case when
552 event == PTRACE_EVENT_CLONE && stopping && WSTOPSIG (status) != SIGSTOP.
554 2010-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
557 * linux-nat.c (linux_nat_wait_1): Reset STATUS after calling
558 linux_nat_wait_1. Use always LP->STATUS afterwards.
560 2010-07-20 Hui Zhu <teawater@gmail.com>
562 * inf-ptrace.c (inf_ptrace_create_inferior): Initialize back_to.
563 (inf_ptrace_attach): Ditto.
565 2010-07-19 Jan Kratochvil <jan.kratochvil@redhat.com>
567 Make core files the process_stratum.
568 * corefile.c (core_target): New variable.
569 (core_file_command): Remove variable t, use core_target.
570 * corelow.c (core_ops): Make it static.
571 (init_core_ops): Change to process_stratum. Initialize CORE_TARGET.
572 * defs.h (make_cleanup_unpush_target): New prototype.
573 * gdbarch.h: Regenerate.
574 * gdbarch.sh (core_pid_to_str): Remove core_stratum from its comment.
575 * gdbcore.h (core_target): New declaration.
576 * inf-ptrace.c (inf_ptrace_create_inferior, inf_ptrace_attach): New
577 variables ops_already_pushed and back_to. Use push_target,
578 make_cleanup_unpush_target and discard_cleanups calls.
579 * record.c (record_open): Replace core_stratum by a core_bfd check.
580 * target.c (target_is_pushed): New function.
581 (find_core_target): Remove.
582 * target.h (enum strata) <core_stratum>: Remove.
583 (target_is_pushed): New declaration.
584 (find_core_target): Remove declaration.
585 * tracepoint.c (init_tfile_ops) <to_stratum>: Remove comment.
586 * utils.c (do_unpush_target, make_cleanup_unpush_target): New functions.
588 2010-07-19 Hui Zhu <teawater@gmail.com>
590 * breakpoint.c (single_step_breakpoints_inserted): New
592 * breakpoint.h (single_step_breakpoints_inserted): Extern.
593 * infrun.c (maybe_software_singlestep): Add check code.
594 * record.c (record_resume): Add code for software single step.
595 (record_wait): Ditto.
597 2010-07-18 Jan Kratochvil <jan.kratochvil@redhat.com>
599 * linux-nat.c (linux_handle_extended_wait): Move variable new_lp into
600 a more inner block. Remove its unused declaration initializer.
602 2010-07-16 Thiago Jung Bauermann <bauerman@br.ibm.com>
604 * NEWS: Mention support for the new ptrace interface and hardware
605 accelerated watchpoint conditions on powerpc-linux.
607 2010-07-16 Ozkan Sezer <sezeroz@gmail.com>
609 * target.c (debug_to_insert_breakpoint): Instead of casting to unsigned
610 long and %ld, use core_addr_to_string() and %s to print CORE_ADDR vars
611 and host_address_to_string() and %s for pointers.
612 (debug_to_remove_breakpoint): Likewise.
613 (debug_to_region_ok_for_hw_watchpoint): Likewise.
614 (debug_to_can_accel_watchpoint_condition): Likewise.
615 (debug_to_stopped_data_address): Likewise.
616 (debug_to_watchpoint_addr_within_range): Likewise.
617 (debug_to_insert_hw_breakpoint): Likewise.
618 (debug_to_remove_hw_breakpoint): Likewise.
619 (debug_to_insert_watchpoint): Likewise.
620 (debug_to_remove_watchpoint): Likewise.
622 2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
624 * symtab.h (symbol_set_demangled_name): Now takes an optional objfile*
626 (cplus_specific): New struct.
627 * symtab.c (symbol_set_demangled_name): Updated.
628 Use cplus_specific for cplus symbols.
629 (symbol_get_demangled_name): Retrive the name from the cplus_specific
630 struct for cplus symbols.
631 (symbol_init_language_specific): Set cplus_specific for cplus symbols.
632 (symbol_set_names): Pass objfile to symbol_set_demangled_name.
633 * symtab.c (symbol_init_cplus_specific): New function.
635 2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
637 * symtab.h (symbol_set_demangled_name): New function.
638 (symbol_get_demangled_name): New function.
639 * symtab.c (symbol_set_demangled_name): New function.
640 (symbol_get_demangled_name): New function.
641 (symbol_init_language_specific): Use demangled_name setter and getter.
642 (symbol_set_names): Ditto.
643 (symbol_natural_name): Ditto.
644 (symbol_demangled_name): Ditto.
645 * dwarf2read.c (new_symbol): Ditto.
647 2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
649 * symtab.h: Renamed cplus_specific to mangled_lang.
650 * symtab.c (symbol_init_language_specific): Updated.
651 (symbol_set_names): Updated.
652 (symbol_natural_name): Updated.
653 (symbol_demangled_name): Updated.
654 * ada-lang.c (ada_decode_symbol): Updated.
655 * dwarf2read.c (new_symbol): Updated.
657 2010-07-14 Ken Werner <ken.werner@de.ibm.com>
659 * valops.c (value_assign): Do not call to value_coerce_to_target.
660 (value_must_coerce_to_target): Return 0 in case of TYPE_VECTOR.
662 2010-07-14 Ken Werner <ken.werner@de.ibm.com>
664 * MAINTAINERS: Add myself for write after approval privileges.
666 2010-07-13 Emmanuel Thomé <Emmanuel.Thome@gmail.com>
668 * c-valprint.c (c_val_print): Add embedded_offset to address in
669 call to val_print_array_elements.
671 2010-07-13 Tom Tromey <tromey@redhat.com>
673 * dwarf2read.c (dwarf2_read_index): Correctly set 'total_size'.
675 2010-07-13 Tom Tromey <tromey@redhat.com>
677 * dwarf2read.c (dwarf2_per_cu_text_offset): Fix reference to
680 2010-07-13 Tom Tromey <tromey@redhat.com>
682 * symfile.c (set_initial_language): Update.
683 (deduce_language_from_filename): Argument type now const.
684 * symtab.h (find_main_filename): Update.
685 (deduce_language_from_filename): Update.
686 * symtab.c (find_main_filename): Make result const.
687 * dwarf2read.c (dw2_find_symbol_file): Change return type.
688 * psymtab.c (find_symbol_file_from_partial): Change return type.
689 * symfile.h (struct quick_symbol_functions) <find_symbol_file>:
692 2010-07-13 Tom Tromey <tromey@redhat.com>
694 * breakpoint.c (save_cmdlist): No longer static.
695 * gdbcmd.h (save_cmdlist): Declare.
696 * symfile.c (symbol_file_add_with_addrs_or_offsets): Set
697 OBJF_READNOW on objfile if readnow_symbol_files.
698 * elfread.c (elf_symfile_read): Use dwarf2_initialize_objfile.
699 (elf_sym_fns_gdb_index): New global.
700 * dwarf2read.c: Include exceptions.h.
702 (struct mapped_index): New.
703 (dwarf2_per_cu_data_ptr): New typedef.
704 (struct dwarf2_per_objfile) <using_index, index_table, gdb_index>:
706 (GDB_INDEX_SECTION): New define.
707 (struct dwarf2_per_cu_quick_data): New.
708 (struct dwarf2_per_cu_data) <objfile>: New field.
711 (byte_swap): New function.
712 (MAYBE_SWAP): New macro.
713 (INDEX_SUFFIX): New macro.
714 (dw2_do_instantiate_symtab): New function.
715 (dw2_instantiate_symtab): Likewise.
716 (create_cus_from_index): Likewise.
717 (create_addrmap_from_index): Likewise.
718 (mapped_index_string_hash): Likewise.
719 (find_slot_in_mapped_hash): Likewise.
720 (dwarf2_read_index): Likewise.
721 (dw2_setup): Likewise.
722 (dw2_require_line_header): Likewise.
723 (dw2_require_full_path): Likewise.
724 (dw2_find_last_source_symtab): Likewise.
725 (dw2_forget_cached_source_info): Likewise.
726 (dw2_lookup_symtab): Likewise.
727 (dw2_lookup_symbol): Likewise.
728 (dw2_do_expand_symtabs_matching): Likewise.
729 (dw2_pre_expand_symtabs_matching): Likewise.
730 (dw2_print_stats): Likewise.
731 (dw2_dump): Likewise.
732 (dw2_relocate): Likewise.
733 (dw2_expand_symtabs_for_function): Likewise.
734 (dw2_expand_all_symtabs): Likewise.
735 (dw2_expand_symtabs_with_filename): Likewise.
736 (dw2_find_symbol_file): Likewise.
737 (dw2_map_ada_symtabs): Likewise.
738 (dw2_expand_symtabs_matching): Likewise.
739 (dw2_find_pc_sect_symtab): Likewise.
740 (dw2_map_symbol_names): Likewise.
741 (dw2_map_symbol_filenames): Likewise.
742 (dw2_has_symbols): Likewise.
743 (dwarf2_gdb_index_functions): New global.
744 (dwarf2_initialize_objfile): New function.
745 (process_psymtab_comp_unit): Update.
746 (add_partial_subprogram): Likewise.
747 (dwarf2_psymtab_to_symtab): Likewise.
748 (psymtab_to_symtab_1): Use dw2_do_instantiate_symtab.
749 (process_full_comp_unit): Update.
750 (find_file_and_directory): New function.
751 (read_file_scope): Use find_file_and_directory.
752 (dwarf2_per_cu_objfile): Update.
753 (dwarf2_per_cu_addr_size): Update.
754 (dwarf2_per_cu_offset_size): Update.
755 (dwarf2_free_objfile): Free the index, if needed.
756 (dwarf2_per_objfile_free): Unmap the index, if needed.
757 (struct strtab_entry): New.
758 (hash_strtab_entry): New function.
759 (eq_strtab_entry): Likewise.
760 (create_strtab): Likewise.
761 (add_string): Likewise.
762 (struct symtab_index_entry): New.
763 (struct mapped_symtab): New.
764 (hash_symtab_entry): New function.
765 (eq_symtab_entry): Likewise.
766 (delete_symtab_entry): Likewise.
767 (create_index_table): Likewise.
768 (create_mapped_symtab): Likewise.
769 (cleanup_mapped_symtab): Likewise.
770 (find_slot): Likewise.
771 (hash_expand): Likewise.
772 (add_index_entry): Likewise.
773 (add_indices_to_cpool): Likewise.
774 (write_hash_table): Likewise.
775 (add_address_entry): Likewise.
776 (write_psymbols): Likewise.
777 (write_obstack): Likewise.
778 (unlink_if_set): Likewise.
779 (write_psymtabs_to_index): Likewise.
780 (save_gdb_index_command): Likewise.
781 (_initialize_dwarf2_read): Install "save gdb-index"
783 (create_all_comp_units): Initialize 'objfile' field of CU.
784 (dwarf2_locate_sections): Check for .gdb_index.
785 * psymtab.h (dwarf2_gdb_index_functions): Declare.
786 * symfile.h (dwarf2_initialize_objfile): Declare.
788 2010-07-13 Tom Tromey <tromey@redhat.com>
790 * symtab.c (lookup_symbol_aux_symtabs): Call pre-expand hook.
791 (basic_lookup_transparent_type): Likewise.
792 * symfile.h (struct quick_symbol_functions)
793 <pre_expand_symtabs_matching>: New field.
794 * psymtab.c (pre_expand_symtabs_matching_psymtabs): New function.
795 (psym_functions): Update.
797 2010-07-13 Tom Tromey <tromey@redhat.com>
800 * symtab.h (domain_enum_tag) <LABEL_DOMAIN>: Update comment.
801 * linespec.c (decode_line_1): Update comment. Call decode_label.
802 (decode_label): New function.
803 (symbol_found): Handle LOC_LABEL.
804 * dwarf2read.c (new_symbol) <DW_TAG_label>: Set symbol's type and
805 domain. Call add_symbol_to_list.
807 2010-07-13 Tom Tromey <tromey@redhat.com>
809 * dwarf2loc.h (dwarf2_per_cu_text_offset): Declare.
810 * dwarf2loc.c (find_location_expression): Use
811 dwarf2_per_cu_text_offset.
812 (dwarf2_evaluate_loc_desc): Likewise.
813 (dwarf2_loc_desc_needs_frame): Likewise.
814 (compile_dwarf_to_ax): Likewise.
815 (loclist_describe_location): Likewise.
816 * dwarf2read.c (dwarf2_per_cu_text_offset): New function.
817 (dwarf2_per_cu_objfile): Update comment.
819 2010-07-12 Jan Kratochvil <jan.kratochvil@redhat.com>
821 * dwarf2read.c (read_subrange_type): Call read_subrange_type.
822 * p-lang.c (pascal_printstr): Likewise.
824 2010-07-09 Tom Tromey <tromey@redhat.com>
826 * python/py-prettyprint.c (gdbpy_get_display_hint): Don't use
827 'hint' if it is NULL.
829 2010-07-09 Hui Zhu <teawater@gmail.com>
831 * source.c (print_source_lines_base): Add check for noprint.
833 2010-07-08 Joel Brobecker <brobecker@adacore.com>
835 * python/python-config.py: Resync with Python 2.7 version of this
838 2010-07-08 Joel Brobecker <brobecker@adacore.com>
840 * NEWS: Fix typo in section name (s/GDB 7.1/GDB 7.2).
842 2010-07-07 Joel Brobecker <brobecker@adacore.com>
844 * NEWS: Create a new section for the next release branch.
845 Rename the section of the current branch, now that it has
848 2010-07-07 Joel Brobecker <brobecker@adacore.com>
850 GDB 7.2 branch created (branch timestamp: 2010-07-07 17:00 UTC)
851 * version.in: Bump version to 7.2.50.20100707-cvs.
853 2010-07-07 Tom Tromey <tromey@redhat.com>
855 * dwarf2read.c (dwarf2_const_value) <DW_form_addr>: Create a
857 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Set new field.
858 (dwarf2_loc_desc_needs_frame): Likewise.
859 (compile_dwarf_to_ax) <DW_OP_addr>: Use offset.
860 * dwarf2expr.h (struct dwarf_expr_context) <offset>: New field.
861 * dwarf2expr.c (execute_stack_op) <DW_OP_addr>: Use offset.
862 * dwarf2-frame.c (execute_stack_op): Set 'offset' field. Add
864 (struct dwarf2_frame_cache) <text_offset>: New field.
865 (dwarf2_frame_cache): Set new field.
866 (dwarf2_frame_prev_register): Update.
867 (dwarf2_frame_sniffer): Update.
868 (dwarf2_frame_base_sniffer): Update.
869 (dwarf2_frame_find_fde): Add 'out_offset' argument.
871 2010-07-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
872 Thiago Jung Bauermann <bauerman@br.ibm.com>
874 Support for hw accelerated condition watchpoints in booke powerpc.
876 * breakpoint.c (fetch_watchpoint_value): Rename to fetch_subexp_value
877 and move to eval.c. Change callers.
878 (insert_bp_location): Pass watchpoint condition in
879 target_insert_watchpoint.
880 (remove_breakpoint_1) Pass watchpoint condition in
881 target_remove_watchpoint.
882 (watchpoint_locations_match): Call
883 target_can_accel_watchpoint_condition.
884 * eval.c: Include wrapper.h.
885 (fetch_subexp_value): Moved from breakpoint.c.
886 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint):
888 (can_use_watchpoint_cond_accel): New function.
889 (calculate_dvc): Likewise.
890 (num_memory_accesses): Likewise.
891 (check_condition): Likewise.
892 (ppc_linux_can_accel_watchpoint_condition): Likewise
893 (ppc_linux_insert_watchpoint): Call can_use_watchpoint_cond_accel,
894 check_condition and calculate_dvc.
895 (ppc_linux_remove_watchpoint): Likewise.
896 (_initialize_ppc_linux_nat): Set to_can_accel_watchpoint_condition to
897 ppc_linux_can_accel_watchpoint_condition
898 * target.c (debug_to_insert_watchpoint): Add argument for watchpoint
900 (debug_to_remove_watchpoint): Likewise.
901 (debug_to_can_accel_watchpoint_condition): New function.
902 (update_current_target): Set to_can_accel_watchpoint_condition.
903 (setup_target_debug): Set to_can_accel_watchpoint_condition.
904 * target.h: Add opaque declaration for struct expression.
905 (struct target_ops) <to_insert_watchpoint>,
906 <to_remove_watchpoint>: Add new arguments to pass the watchpoint
907 <to_can_accel_watchpoint_condition>: New member.
908 condition. Update all callers and implementations.
909 (target_can_accel_watchpoint_condition): New macro.
910 * value.c (free_value_chain): New function.
911 * value.h (fetch_subexp_value): New prototype.
912 (free_value_chain): Likewise.
914 2010-07-07 Ulrich Weigand <uweigand@de.ibm.com>
916 * linux-nat.c (linux_nat_do_thread_registers): Use section size
917 from gdbarch_core_regset_sections also for .reg if present.
919 * amd64-linux-tdep.c (amd64_linux_regset_sections): Fix incorrect
920 section size for .reg.
921 * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections): Likewise.
922 (ppc_linux_vmx_regset_sections): Likewise.
923 (ppc_linux_fp_regset_sections): Likewise.
924 (ppc64_linux_vsx_regset_sections): New variable.
925 (ppc64_linux_vmx_regset_sections): Likewise.
926 (ppc64_linux_fp_regset_sections): Likewise.
927 (ppc_linux_init_abi): Install core_regset_section lists appropriate
928 for current word size.
930 2010-07-06 Joel Brobecker <brobecker@adacore.com>
932 * server.c (myresume): Make static.
934 2010-07-06 Tom Tromey <tromey@redhat.com>
936 * configure, config.in: Rebuild.
937 * configure.ac (HAVE_LIBPYTHON2_7): New define.
938 * python/python-internal.h: Handle HAVE_LIBPYTHON2_7.
940 2010-07-06 Andreas Schwab <schwab@linux-m68k.org>
942 * breakpoint.c (_initialize_breakpoint): Add "cl" as alias for
945 2010-07-06 Ken Werner <ken.werner@de.ibm.com>
947 * gdbtypes.h (floatformats_ieee_half): Add declaration.
948 * gdbtypes.c (floatformats_ieee_half): New variable.
949 * doublest.c (floatformat_from_length): Set format to
950 gdbarch_half_format if length matches.
951 * gdbarch.sh (half_bit): New architecture method.
952 (half_format): Likewise.
953 * gdbarch.h: Regenerate.
954 * gdbarch.c: Likewise.
956 2010-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
957 Joel Brobecker <brobecker@adacore.com>
959 Fix re-run of PIE executable, PR shlibs/11776.
960 * solib-svr4.c (svr4_relocate_main_executable) <symfile_objfile>: Remove
961 the part of pre-set SYMFILE_OBJFILE->SECTION_OFFSETS.
963 2010-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
964 Joel Brobecker <brobecker@adacore.com>
966 * auxv.c (memory_xfer_auxv): Update attach comment.
967 * solib-svr4.c (svr4_special_symbol_handling): Remove the call to
968 svr4_relocate_main_executable.
969 (svr4_solib_create_inferior_hook): Make the call to
970 svr4_relocate_main_executable unconditional.
972 2010-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
973 Joel Brobecker <brobecker@adacore.com>
975 * auxv.c (ld_so_xfer_auxv): Do not error on failed read of data_address.
977 2010-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
978 Joel Brobecker <brobecker@adacore.com>
980 Fix attaching to PIEs prelinked on the disk after the process was
982 * solib-svr4.c (svr4_exec_displacement): New variable arch_size.
983 Verify it against bfd_get_arch_size. Try to match arbitrary
984 displacement for the phdrs comparison.
986 2010-07-02 Tom Tromey <tromey@redhat.com>
989 * libunwind-frame.c (libunwind_frame_prev_register): Don't set
990 value as optimized-out.
992 2010-07-02 Ulrich Weigand <uweigand@de.ibm.com>
993 Thiago Jung Bauermann <bauerman@br.ibm.com>
995 * breakpoint.c (can_use_hardware_watchpoint): Answer "what does this
996 represent?" question in comment. Change comment to a proper sentence.
998 2010-07-02 Ken Werner <ken.werner@de.ibm.com>
1000 * c-valprint.c (c_val_print): Fix printing of character vectors.
1002 2010-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1004 * spu-tdep.c (spu_catch_start): Adjust the caller of changed
1005 create_breakpoint prototype.
1007 2010-07-01 Pedro Alves <pedro@codesourcery.com>
1009 * breakpoint.c (BREAK_ARGS_HELP, _initialize_breakpoint): Clarify
1010 usefulness suggestion of multiple breakpoints at same location.
1012 2010-07-01 Pedro Alves <pedro@codesourcery.com>
1014 * breakpoint.c (BREAK_ARGS_HELP): Add missing `the'.
1016 2010-07-01 Pedro Alves <pedro@codesourcery.com>
1018 * dwarf2loc.c (locexpr_tracepoint_var_ref)
1019 (loclist_tracepoint_var_ref): Handle optimized out values.
1021 2010-07-01 Pedro Alves <pedro@codesourcery.com>
1023 * breakpoint.c (update_watchpoint, _initialize_breakpoint): Remove
1024 unnecessary space in string.
1025 * filesystem.c (_initialize_filesystem): Ditto.
1026 * frame.c (_initialize_frame): Ditto.
1027 * infcmd.c (step_once): Ditto.
1028 * infrun.c (_initialize_infrun): Ditto.
1029 * linux-nat.c (linux_child_follow_fork): Ditto.
1030 * maint.c (maintenance_deprecate): Ditto.
1031 * memattr.c (_initialize_mem): Ditto.
1032 * mips-tdep.c (_initialize_mips_tdep): Ditto.
1033 * monitor.c (monitor_open): Ditto.
1034 * procfs.c (procfs_xfer_memory): Ditto.
1035 * reverse.c (bookmarks_info): Ditto.
1036 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Ditto.
1037 * stack.c (_initialize_stack): Ditto.
1038 * tracepoint.c (_initialize_tracepoint): Ditto.
1039 * xtensa-tdep.c (xtensa_supply_gregset,
1040 xtensa_regset_from_core_section): Ditto.
1042 2010-07-01 Tom Tromey <tromey@redhat.com>
1044 * value.h (struct lval_funcs) <check_any_valid>: Rename from
1046 * value.c (value_entirely_optimized_out): Invert result. Update
1047 for new function name.
1049 2010-07-01 Pedro Alves <pedro@codesourcery.com>
1051 Static tracepoints support.
1053 * NEWS: Mention new support for static tracepoints.
1054 (New packets): Mention qTfSTM, qTsSTM, qTSTMat and
1055 qXfer:statictrace:read.
1056 (New features in the GDB remote stub, GDBserver): Mention static
1057 tracepoints support using an UST based backend.
1058 (New commands): Mention "info static-tracepoint-markers" and
1060 * breakpoint.c (is_marker_spec): New.
1061 (is_tracepoint): Handle static tracepoints.
1062 (validate_commands_for_breakpoint): Static tracepoints can't do
1064 (static_tracepoints_here): New.
1065 (bpstat_what): Handle static tracepoints.
1066 (print_one_breakpoint_location, allocate_bp_location, mention):
1068 (create_breakpoint_sal): Ditto.
1069 (decode_static_tracepoint_spec): New.
1070 (create_breakpoint): Replace `hardwareflag', and `traceflag' with
1071 `type_wanted'. Adjust. Handle static tracepoint marker
1073 (break_command_1): Adjust.
1074 (update_static_tracepoint): New.
1075 (update_breakpoint_locations): Handle static tracepoints.
1076 (breakpoint_re_set_one): Handle static tracepoint marker
1078 (disable_command, enable_command): Handle static tracepoints.
1079 (trace_command, ftrace_command): Adjust.
1080 (strace_command): New.
1081 (create_tracepoint_from_upload): Adjust.
1082 (save_breakpoints): Handle static tracepoints.
1083 (_initialize_breakpoint): Install the "strace" command.
1084 * breakpoint.h (enum bptype): New bp_static_tracepoint type.
1085 (struct breakpoint): New fields static_trace_marker_id and
1086 static_trace_marker_id_idx.
1087 (breakpoints_here_p): Declare.
1088 (create_breakpoint): Adjust.
1089 (static_tracepoints_here): Declare.
1090 * remote.c (struct remote_state) <static_tracepoints>: New field.
1091 (PACKET_qXfer_statictrace_read, PACKET_StaticTracepoints): New.
1092 (remote_static_tracepoint_marker_at): New.
1093 (remote_static_tracepoint_markers_by_strid): New.
1094 (remote_static_tracepoint_feature): New.
1095 (remote_disconnected_tracing_feature): Handle "StaticTracepoints".
1096 (remote_xfer_partial): Handle TARGET_OBJECT_STATIC_TRACE_DATA.
1097 (remote_supports_static_tracepoints): New.
1098 (remote_download_tracepoint): Download static tracepoints.
1099 (init_remote_ops): Install remote_static_tracepoint_marker_at and
1100 remote_static_tracepoint_markers_by_strid.
1101 (_initialize_remote): Install set|show remote static-tracepoints,
1102 and set|show remote read-sdata-object commands.
1103 * target.c (update_current_target): Inherit and default
1104 to_static_tracepoint_marker_at, and
1105 to_static_tracepoint_markers_by_strid.
1106 * target.h (static_tracepoint_marker): Forward declare.
1107 (enum target_object): New object TARGET_OBJECT_STATIC_TRACE_DATA.
1108 (static_tracepoint_marker_p): New typedef.
1109 (DEF_VEC_P(static_tracepoint_marker_p)): New VEC type.
1110 (struct target_ops): New fields to_static_tracepoint_marker_at and
1111 to_static_tracepoint_markers_by_strid.
1112 (target_static_tracepoint_marker_at)
1113 (target_static_tracepoint_markers_by_strid): New.
1114 * tracepoint.c: Include source.h.
1115 (validate_actionline): Handle $_sdata.
1116 (struct collection_list): New field strace_data.
1117 (add_static_trace_data): New.
1118 (clear_collection_list): Clear strace_data.
1119 (stringify_collection_list): Account for a possible static trace
1121 (encode_actions_1): Encode an $_sdata collection.
1122 (parse_tracepoint_definition): Handle static tracepoints.
1123 (parse_static_tracepoint_marker_definition): New.
1124 (release_static_tracepoint_marker): New.
1125 (print_one_static_tracepoint_marker): New.
1126 (info_static_tracepoint_markers_command): New.
1127 (sdata_make_value): New.
1128 (_initialize_tracepoint): Create the $_sdata convenience variable.
1129 Add the "info static-tracepoint-markers" command.
1130 Mention $_sdata in the "collect" command's help output.
1131 * tracepoint.h (struct static_tracepoint_marker): New.
1132 (parse_static_tracepoint_marker_definition)
1133 (release_static_tracepoint_marker): Declare.
1134 * mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust.
1135 * python/py-breakpoint.c (bppy_new): Adjust.
1137 2010-06-30 Joel Brobecker <brobecker@adacore.com>
1139 * python/python-internal.h (_XOPEN_SOURCE): Undefine before
1142 2010-06-29 Doug Evans <dje@google.com>
1145 * dwarf2read.c (dwarf2_add_field): Only create a symbol if
1146 DW_AT_external is present.
1150 * dwarf2read.c (dwarf2_add_field): If DW_AT_const_value is present,
1151 create a symbol for the field and record the value.
1152 (new_symbol): Handle DW_TAG_member.
1153 * gdbtypes.c (field_is_static): Remove FIXME.
1154 * symtab.c (search_symbols): When searching for VARIABLES_DOMAIN,
1155 only ignore LOC_CONST symbols that are enums.
1157 * dwarf2read.c: Remove trailing whitespace.
1159 Delete FIELD_LOC_KIND_DWARF_BLOCK, unused.
1160 * gdbtypes.h (enum field_loc_kind): Delete FIELD_LOC_KIND_DWARF_BLOCK.
1161 (struct main_type, field loc): Delete dwarf_block.
1162 (FIELD_DWARF_BLOCK): Delete.
1163 (SET_FIELD_DWARF_BLOCK): Delete.
1164 (TYPE_FIELD_DWARF_BLOCK): Delete.
1165 * gdb-gdb.py (StructMainTypePrettyPrinter.struct_field_location_img):
1168 2010-06-29 Hui Zhu <teawater@gmail.com>
1170 * record.c (set_record_pic_cmdlist,
1171 show_record_pic_cmdlist): New variables.
1172 (set_record_pic_command,
1173 show_record_pic_command): New functions.
1174 (record_pic_function, record_pic_line, record_pic_enum,
1175 set_record_pic_type, record_pic_hide_nofunction,
1176 record_pic_hide_nosource, record_pic_hide_same): New variables.
1177 (record_pic_fputs): New function.
1178 (function_list, node_list, edge_list): New struct.
1179 (function_list, node_list, edge_list): New variables.
1180 (record_pic_cleanups, record_pic_node,
1181 record_pic_edge, cmd_record_pic): New functions.
1182 (_initialize_record): Add new commands for record pic.
1184 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1186 * dwarf2read.c (read_structure_type) <fi.typedef_field_list>: Call
1187 ALLOCATE_CPLUS_STRUCT_TYPE.
1189 2010-06-28 Phil Muldoon <pmuldoon@redhat.com>
1190 Tom Tromey <tromey@redhat.com>
1191 Thiago Jung Bauermann <bauerman@br.ibm.com>
1193 * value.c (pack_unsigned_long): New function.
1194 (value_from_ulongest): New function.
1195 * value.h (value_from_ulongest): Declare.
1196 * python/python.c (_initialize_python): Call
1197 gdbpy_initialize_thread and gdbpy_initialize_inferior.
1198 * python/python-internal.h: Define thread_object.
1199 (gdbpy_inferiors, gdbpy_selected_thread)
1200 (frame_info_to_frame_object, create_thread_object)
1201 (find_thread_object, find_inferior_object)
1202 (gdbpy_initialize_thread, gdbpy_initialize_inferiors)
1203 (gdbpy_is_value_object, get_addr_from_python): Declare.
1204 * python/py-value.c (builtin_type_upylong): Define.
1205 (convert_value_from_python): Add logic for ulongest.
1206 (gdbpy_is_value_object): New function.
1207 * python/py-utils.c (get_addr_from_python): New function.
1208 * python/py-frame.c (frame_info_to_frame_object): Return a PyObject.
1209 (gdbpy_selected_frame): Use PyObject over frame_info.
1210 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-inferior and
1212 (SUBDIR_PYTHON_SRCS): Likewise.
1213 (py-inferior.o): New Rule.
1214 (py-infthread.o): New Rule.
1215 * python/py-inferior.c: New File.
1216 * python/py-infthread.c: New File.
1218 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1220 * c-typeprint.c (c_type_print_base): For no fields check include also
1221 TYPE_TYPEDEF_FIELD_COUNT. Print new typedefs section.
1222 * dwarf2read.c (struct typedef_field_list)
1223 (struct field_info) <typedef_field_list, typedef_field_list_count>: New.
1224 (dwarf2_add_typedef): New.
1225 (read_structure_type): Call dwarf2_add_typedef for DW_TAG_typedef.
1226 Copy also FI.TYPEDEF_FIELD_LIST.
1227 * gdbtypes.h (struct typedef_field)
1228 (struct cplus_struct_type) <typedef_field, typedef_field_count>
1229 (TYPE_TYPEDEF_FIELD_ARRAY, TYPE_TYPEDEF_FIELD, TYPE_TYPEDEF_FIELD_NAME)
1230 (TYPE_TYPEDEF_FIELD_TYPE, TYPE_TYPEDEF_FIELD_COUNT): New.
1232 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1234 * cp-namespace.c (cp_lookup_nested_type): New variable
1235 concatenated_name. Turn the current return condition into a reverse
1236 one. Call also lookup_static_symbol_aux on the constructed qualified
1238 * symtab.c (lookup_symbol_aux): Move variable objfile and searching in
1239 other files into a called ...
1240 (lookup_static_symbol_aux): ... new function here.
1241 * symtab.h (lookup_static_symbol_aux): New prototype.
1242 * valops.c (value_maybe_namespace_elt): Call also
1243 lookup_static_symbol_aux if we failed otherwise.
1245 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1247 Fix PR c++/11703 and PR gdb/1448.
1248 * c-exp.y (yylex) <last_was_coloncolon && first_was_coloncolon>: Add
1251 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1253 Fix modification of cplus_struct_default.
1254 * dwarf2read.c (dwarf2_add_member_fn) <no DW_AT_vtable_elem_location>:
1255 Call ALLOCATE_CPLUS_STRUCT_TYPE.
1256 * gdbtypes.c (cplus_struct_default): New empty initializer, comment it.
1258 2010-06-28 Joel Brobecker <brobecker@adacore.com>
1260 * NEWS: Add entry announcing the python directory.
1262 2010-06-28 Tom Tromey <tromey@redhat.com>
1264 * dwarf2read.c (read_structure_type): Allocate null cleanup later.
1266 2010-06-28 Doug Evans <dje@google.com>
1268 * breakpoint.c (breakpoint_sals_to_pc): Delete arg address, unused.
1269 All callers updated.
1271 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1273 * cp-valprint.c (cp_print_value_fields) <recurse == 0>: Call
1274 obstack_begin after each obstack_free.
1276 2010-06-27 Doug Evans <dje@google.com>
1278 * value.c (value_static_field): Use `switch' instead of `if'.
1279 Assert-fail if passed invalid TYPE_FIELD_LOC_KIND.
1281 * valops.c (search_struct_field): Fix typo in error message.
1283 2010-06-26 Ulrich Weigand <uweigand@de.ibm.com>
1285 * dwarf2expr.c (execute_stack_op): Place preprocessor
1286 directives at the start of the source line.
1288 2010-06-25 Paul Hilfinger <hilfinger@adacore.com>
1290 * defs.h (make_command_stats_cleanup): Declare.
1291 (set_display_time): Declare.
1292 (set_display_space): Declare.
1293 * event-top.c (command_handler): Use make_command_stats_cleanup.
1294 * main.c (display_time, display_space): Move definitions to utils.c.
1295 (captured_main): Use make_command_stats_cleanup to get start-up
1297 Use set_display_time and set_display_space for processing OPT_STATISTICS
1299 * maint.c (maintenance_time_display): Use set_display_time.
1300 (maintenance_space_display): Use set_display_space.
1301 * top.c (execute_command): Remove obsolete 'maint time' code.
1302 (command_loop): Use make_command_stats_cleanup.
1303 * utils.c (struct cmd_stats): Structure for storing initial time
1305 (display_time, display_space): Move definitions here from utils.c.
1306 (set_display_time): New function.
1307 (set_display_space): New function.
1308 (make_command_stats_cleanup): New function.
1309 (report_command_stats): New auxiliary function for
1310 make_command_stats_cleanup.
1312 2010-06-25 Ulrich Weigand <uweigand@de.ibm.com>
1314 * solib-spu.c (append_ocl_sos): Fix xsnprintf statement for
1315 hosts where CORE_ADDR is long long.
1317 2010-06-25 Tom Tromey <tromey@redhat.com>
1320 * python/python.c (execute_gdb_command): Add keywords. Accept
1321 "to_string" argument.
1322 (struct restore_ui_file_closure): New.
1323 (restore_ui_file): New function.
1324 (make_cleanup_restore_ui_file): Likewise.
1325 (GdbMethods) <execute>: Update.
1327 2010-06-25 Ulrich Weigand <uweigand@de.ibm.com>
1329 * s390-tdep.c (s390_push_dummy_call): Error on stack overflow
1330 during inferior call stack frame setup.
1332 2010-06-25 Ken Werner <ken.werner@de.ibm.com>
1334 * solib-spu.c: Include "exception.h".
1335 (ocl_program_data_key): New variable.
1336 (append_ocl_sos): New function.
1337 (ocl_enable_break): Likewise.
1338 (spu_current_sos): Call append_ocl_sos.
1339 (spu_solib_loaded): Call ocl_enable_break.
1340 (_initialize_spu_solib): Register ocl_program_data_key.
1342 2010-06-25 Ulrich Weigand <uweigand@de.ibm.com>
1344 * cp-support.c (reset_directive_searched): New function.
1345 (make_symbol_overload_list_using): Prevent recursive calls.
1347 2010-06-25 Phil Muldoon <pmuldoon@redhat.com>
1349 * printcmd.c (print_variable_and_value): Print error message on
1352 2010-06-25 Ulrich Weigand <uweigand@de.ibm.com>
1354 * dwarf2expr.h (struct dwarf_value_location): Use ULONGEST as type
1356 (struct dwarf_expr_piece): Rename "expr" member to "mem". Add new
1358 (dwarf_expr_push): Change input type to ULONGEST.
1359 (dwarf_expr_fetch): Change return type to ULONGEST.
1360 (dwarf_expr_fetch_address): Add prototype.
1361 (dwarf2_read_address): Remove prototype.
1362 * dwarf2expr.c (dwarf_expr_push): Use ULONGEST as type of stack values.
1363 Truncate stack values to ctx->addr_size bytes.
1364 (dwarf_expr_fetch): Change return value to ULONGEST.
1365 (dwarf_expr_fetch_address): New function.
1366 (add_piece): Use dwarf_expr_fetch_address instead of dwarf_expr_fetch
1367 when appropriate. Update for struct dwarf_expr_piece changes.
1368 (dwarf2_read_address): Remove.
1369 (unsigned_address_type): Remove.
1370 (signed_address_type): Remove.
1371 (execute_stack_op): Use dwarf_expr_fetch_address instead of
1372 dwarf_expr_fetch when appropriate. Use ULONGEST as type of stack
1373 values. Perform operations on ULONGEST instead of on GDB values,
1374 sign-extending from ctx->addr_size bytes as needed. Read DW_OP_addr
1375 values and DW_OP_deref results as unsigned integers.
1376 * dwarf2loc.c (read_pieced_value): Update for struct dwarf_expr_piece
1378 (write_pieced_value): Likewise.
1379 (dwarf2_evaluate_loc_desc): Use dwarf_expr_fetch_address instead of
1380 dwarf_expr_fetch when appropriate.
1381 (compile_dwarf_to_ax): Read DW_OP_addr values as unsigned integers.
1382 * dwarf2-frame.c (execute_stack_op): Use dwarf_expr_fetch_address
1383 instead of dwarf_expr_fetch when appropriate.
1385 2010-06-25 Pierre Muller <muller@ics.u-strasbg.fr>
1387 * c-typeprint.c (c_print_typedef): Append new type name for typedefs.
1389 2010-06-24 Joel Brobecker <brobecker@adacore.com>
1391 * python/python.c (_initialize_python): Add new "constant"
1392 PYTHONDIR in gdb module. Insert this path at the head of
1393 sys.path. Set gdb.__path__ to gdb.PYTHONDIR + '/gdb' and
1394 exec its __init__.py script if it exists in that directory.
1396 2010-06-24 Kevin Buettner <kevinb@redhat.com>
1398 * rx-tdep.c (RX_ACC_REGNUM): Define.
1399 (RX_NUM_REGS): Redefine to 26.
1400 (rx_register_name): Add register "acc". Change order of several
1401 registers. Change name of "vct" register to "fintv" to match RX
1403 (rx_register_type): Add case for RX_ACC_REGNUM.
1405 2010-06-24 Tom Tromey <tromey@redhat.com>
1407 * psymtab.c (lookup_partial_symbol): Mark definition as static.
1409 2010-06-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1410 Tom Tromey <tromey@redhat.com>
1412 Fix GDB startup on readonly filesystem.
1413 * charset.c (find_charset_names): Use PEX_USE_PIPES for pex_init.
1415 2010-06-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1416 Pedro Alves <pedro@codesourcery.com>
1419 * breakpoint.c (handle_jit_event): New function.
1420 (bpstat_what): Remove enum class, kc, ss, sn, sgl, slr, clr, sr, shl,
1421 jit, err, table and bs_class. New variables shlib_event, jit_event,
1422 this_action and bptype. Change bs_class assignments to this_action
1423 assignments. new unhandled bptype internal error. Move here
1424 shlib_event and jit_event handling from handle_inferior_event.
1425 * breakpoint.h (enum bpstat_what_main_action): Extend the comment.
1426 Reorder items. Remove BPSTAT_WHAT_CHECK_SHLIBS and
1427 BPSTAT_WHAT_CHECK_JIT.
1428 * inferior.h (debug_infrun, stop_on_solib_events): New declarations.
1429 * infrun.c (debug_infrun, stop_on_solib_events): Remove static.
1430 (handle_inferior_event): Reinitialize frame and gdbarch after
1431 bpstat_what call. Move BPSTAT_WHAT_CHECK_SHLIBS and
1432 BPSTAT_WHAT_CHECK_JIT handling to bpstat_what. Reinitialize even
1433 gdbarch when frame gets reinitialized.
1435 2010-06-24 Hui Zhu <teawater@gmail.com>
1437 * printcmd.c (ui_printf): New function.
1438 (printf_command): Call ui_printf.
1439 (_initialize_printcmd): New command "eval".
1441 2010-06-23 Ulrich Weigand <uweigand@de.ibm.com>
1443 * infrun.c (handle_inferior_event): Handle presence of single-step
1444 breakpoints for TARGET_WAITKIND_FORKED and TARGET_WAITKIND_VFORKED.
1445 Cancel single-step breakpoints for TARGET_WAITKIND_EXITED,
1446 TARGET_WAITKIND_SIGNALED, and TARGET_WAITKIND_EXECD.
1447 * breakpoint.c (detach_single_step_breakpoints): New function.
1448 (detach_breakpoints): Call it.
1449 (cancel_single_step_breakpoints): New function.
1450 * breakpoint.h (cancel_single_step_breakpoints): Add prototype.
1452 * spu-tdep.c (spu_memory_remove_breakpoint): New function.
1453 (spu_gdbarch_init): Install it.
1455 2010-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
1457 * configure.ac: Always set RDYNAMIC at least as `-rdynamic'.
1458 * configure: Regenerate.
1460 2010-06-22 Hui Zhu <teawater@gmail.com>
1462 * i386-tdep.c (i386_record_lea_modrm): Change warning to query.
1463 (i386_process_record): Ditto.
1464 * record.c (record_memory_query): New variable.
1465 (_initialize_record): New command "set record memory-query".
1466 * record.h (record_memory_query): New extern.
1468 2010-06-21 Doug Evans <dje@google.com>
1470 * i386-tdep.h (i386_displaced_step_copy_insn): Declare.
1471 * i386-tdep.c (i386_displaced_step_copy_insn): New function.
1472 (i386_syscall_p): Change type of lengthp to int.
1473 (i386_displaced_step_fixup): Handle kernels that run one past a
1475 * i386-linux-tdep.c (i386_linux_init_abi): Use
1476 i386_displaced_step_copy_insn instead of
1477 simple_displaced_step_copy_insn.
1479 2010-06-21 Tom Tromey <tromey@redhat.com>
1481 * dwarf2read.c (read_base_type): Handle DW_ATE_UTF.
1482 (dwarf_type_encoding_name): Likewise.
1484 2010-06-21 Tom Tromey <tromey@redhat.com>
1486 * p-valprint.c (pascal_val_print): Use TYPE_ERROR_NAME.
1487 * p-typeprint.c (pascal_type_print_base): Use TYPE_ERROR_NAME.
1488 * m2-valprint.c (m2_val_print): Use TYPE_ERROR_NAME.
1489 * gdbtypes.h (TYPE_ERROR_NAME): New macro.
1490 * f-valprint.c (f_val_print): Use TYPE_ERROR_NAME.
1491 * f-typeprint.c (f_type_print_base): Use TYPE_ERROR_NAME.
1492 * dwarf2read.c (tag_type_to_type): Create a new error type on
1494 * c-valprint.c (c_val_print): Use TYPE_ERROR_NAME.
1495 * c-typeprint.c (c_type_print_base): Use TYPE_ERROR_NAME.
1497 2010-06-21 Michael Snyder <msnyder@vmware.com>
1499 * breakpoint.c (_initialize_breakpoint): Use add_prefix_cmd,
1500 not add_abbrev_prefix_cmd, for "enable breakpoints".
1502 2010-06-21 Ulrich Weigand <uweigand@de.ibm.com>
1504 * dwarf2loc.c (find_location_expression): Add relocation offset
1505 to base-address-selection entry base addresses. Read addresses
1506 (and offsets) as signed/unsigned integers, depending on the
1507 BFD's sign_extend_vma flag. Do not call dwarf2_read_address.
1508 (loclist_describe_location): Likewise.
1509 (disassemble_dwarf_expression): Read DW_OP_addr operand as
1510 unsigned integer. Do not call dwarf2_read_address.
1511 (locexpr_describe_location): Likewise for DW_OP_GNU_push_tls_address.
1513 2010-06-19 Ulrich Weigand <uweigand@de.ibm.com>
1515 * spu-tdep.c (spu_frame_unwind_cache): Use LSLR register
1516 value instead of hard-coded SPU_LS_SIZE.
1517 (spu_software_single_step): Likewise.
1518 * spu-tdep.h (SPU_LS_SIZE): Remove.
1520 2010-06-19 Ulrich Weigand <uweigand@de.ibm.com>
1522 * spu-multiarch.c (spu_xfer_partial): Wrap around local store
1523 limit on local store memory accesses.
1524 * spu-linux-nat.c (spu_xfer_partial): Likewise.
1525 * spu-tdep.c (spu_lslr): Remove.
1526 (spu_pointer_to_address): Do not truncate addresses.
1527 (spu_integer_to_address): Likewise.
1528 (spu_overlay_new_objfile): Use SPU_OVERLAY_LMA.
1529 * spu-tdep.h: Add comments.
1530 (SPUADDR_SPU): Respect SPU_OVERLAY_LMA bit.
1531 (SPU_OVERLAY_LMA): Define.
1533 2010-06-18 Stan Shebs <stan@codesourcery.com>
1535 * osdata.c (get_osdata): Warn separately if target does not report
1537 (info_osdata_command): Allow empty type, report error if target
1538 does not return available types of OS data.
1539 * linux-nat.c (linux_nat_xfer_osdata): Report list of OS data
1540 types if no annex supplied.
1542 * thread.c (thread_id_make_value): Make a value representing the
1544 (_initialize_thread): Create $_thread.
1546 2010-06-17 Joel Brobecker <brobecker@adacore.com>
1548 * dwarf2read.c (psymtabs_addrmap_cleanup): Add empty line after
1549 last local variable declaration. No real code change.
1551 2010-06-17 Tom Tromey <tromey@redhat.com>
1553 * dwarf2read.c (psymtabs_addrmap_cleanup): New function.
1554 (dwarf2_build_psymtabs_hard): Use it. Create addrmap on a
1557 2010-06-16 Sergio Durigan Junior <sergiodj@redhat.com>
1558 Jan Kratochvil <jan.kratochvil@redhat.com>
1560 * breakpoint.c: Include parser-defs.h.
1561 (watchpoint_exp_is_const): New function.
1562 (watch_command_1): Call watchpoint_exp_is_const to check
1563 if the expression is constant.
1565 2010-06-15 Andreas Schwab <schwab@linux-m68k.org>
1567 * configure.ac: Check for RDYNAMIC also for cross builds.
1568 * configure: Regenerate.
1570 2010-06-15 Pedro Alves <pedro@codesourcery.com>
1572 * Makefile.in (ALL_TARGET_OBS): Remove solib-target.o.
1573 (SFILES): Remove solib-null.c, add solib-target.c.
1574 (COMMON_OBS): Remove solib-null.o, add solib-target.o.
1575 (ALLDEPFILES): Remove solib-target.c.
1576 * solib-target.c (_initialize_solib_target): Set
1577 current_target_so_ops to solib_target_so_ops if not already set.
1578 * solib-null.c: Delete.
1580 2010-06-14 Pedro Alves <pedro@codesourcery.com>
1582 * NEWS: Mention GDBserver's JIT compilation of tracepoint
1585 2010-06-14 Ulrich Weigand <uweigand@de.ibm.com>
1587 * cp-valprint.c (cp_print_static_field): Members of
1588 dont_print_stat_array_obstack are of type "struct type *".
1589 (_initialize_cp_valprint): Likewise.
1591 2010-06-14 Ulrich Weigand <uweigand@de.ibm.com>
1593 * frame.c (frame_register_unwind): Do not access contents
1594 of "optimized out" unwound register value.
1596 2010-06-14 Jan Kratochvil <jan.kratochvil@redhat.com>
1598 * ada-lang.h (ada_print_type): Make varstring const.
1599 * ada-typeprint.c (print_func_type): Make name const.
1600 (ada_print_type): Make varstring const.
1601 * c-lang.h (c_print_type): Make varstring const.
1602 * c-typeprint.c (c_print_type): Likewise.
1603 * f-lang.h (f_print_type): Likewise.
1604 * f-typeprint.c (f_print_type): Likewise.
1605 * jv-lang.h (java_print_type): Likewise.
1606 * jv-typeprint.c (java_print_type): Likewise.
1607 * language.c (unk_lang_print_type): Likewise.
1608 * language.h (struct language_defn) <la_print_type>: Likewise.
1609 * m2-lang.h (m2_print_type): Likewise.
1610 * m2-typeprint.c (m2_print_type): Likewise.
1611 * p-lang.h (pascal_print_type): Likewise.
1612 * p-typeprint.c (pascal_print_type): Likewise.
1614 2010-06-11 Stan Shebs <stan@codesourcery.com>
1616 Add per-operation permission flags.
1618 * target.h (struct target_ops): New method to_set_permissions.
1619 (target_set_permissions): New macro.
1620 (target_insert_breakpoint): Change macro to function.
1621 (target_remove_breakpoint): Ditto.
1622 (target_stop): Ditto.
1623 (may_write_registers): Declare.
1624 (may_write_memory): Declare.
1625 (may_insert_breakpoints): Declare.
1626 (may_insert_tracepoints): Declare.
1627 (may_insert_fast_tracepoints): Declare.
1628 (may_stop): Declare.
1629 * target.c (may_write_registers, may_write_registers_1): New globals.
1630 (may_write_memory, may_write_memory_1): New globals.
1631 (may_insert_breakpoints, may_insert_breakpoints_1): New globals.
1632 (may_insert_tracepoints, may_insert_tracepoints_1): New globals.
1633 (may_insert_fast_tracepoints, may_insert_fast_tracepoints_1): New
1635 (may_stop, may_stop_1): New global.
1636 (target_xfer_partial): Test for write permission.
1637 (target_store_registers): Ditto.
1638 (target_insert_breakpoint): New function.
1639 (target_remove_breakpoint): New function.
1640 (target_stop): New function.
1641 (_initialize_targets): Add new set/show variables.
1642 (set_write_memory_permission): New function.
1643 (update_target_permissions): New function.
1644 (set_target_permissions): New function.
1645 (update_current_target): Default to_set_permissions.
1646 (_initialize_targets): Use new globals and setter function.
1647 * tracepoint.c (start_tracing): Test for permission.
1648 * inferior.h (update_observer_mode): Declare.
1649 * infrun.c (non_stop_1): Define earlier.
1650 (observer_mode, observer_mode_1): New globals.
1651 (set_observer_mode, show_observer_mode): New functions.
1652 (update_observer_mode): New function.
1653 (_initialize_infrun): Define "set observer" command.
1654 * remote.c (PACKET_QAllow): New optional packet.
1655 (remote_protocol_features): Add QAllow.
1656 (remote_set_permissions): New function.
1657 (remote_start_remote): Call it.
1658 (init_remote_ops): Add it to target vector.
1659 (_initialize_remote): Add config command for QAllow.
1661 2010-06-11 Tom Tromey <tromey@redhat.com>
1663 * dwarf2read.c (dwarf2_add_member_fn): Handle correct form of
1664 DW_AT_vtable_elem_location even when GCC extension is seen.
1666 2010-06-11 Tom Tromey <tromey@redhat.com>
1668 PR gdb/9977, PR exp/11636:
1669 * value.h (value_offset): Update.
1670 (struct lval_funcs) <check_validity>: New field.
1671 <copy_closure>: Make argument const.
1672 (value_computed_closure): Update.
1673 (value_contents_for_printing): Declare.
1674 (value_bits_valid): Likewise.
1675 (val_print): Likewise.
1676 (set_value_component_location): Update.
1677 (value_entirely_optimized_out): Declare.
1678 * value.c (value_offset): Argument now const.
1679 (require_not_optimized_out): New function.
1680 (value_contents_for_printing): New function.
1681 (value_contents_all): Call require_not_optimized_out.
1682 (value_contents): Likewise.
1683 (value_bits_valid): New function.
1684 (value_computed_closure): Argument now const.
1685 (set_value_component_location): Make 'whole' argument const.
1686 (value_entirely_optimized_out): New function.
1687 (value_bitsize): Argument now 'const'.
1688 (value_bitpos): Likewise.
1689 (value_type): Likewise.
1690 * valprint.h (val_print_array_elements): Update.
1691 * valprint.c (val_print): Add 'val' argument. Use
1692 valprint_check_validity.
1693 (valprint_check_validity): New function.
1694 (value_check_printable): Use value_entirely_optimized_out.
1695 (common_val_print): Update.
1696 (value_print): Likewise.
1697 (val_print_array_elements): Add 'val' argument.
1698 * valops.c (value_fetch_lazy): Use value_contents_for_printing,
1699 value_bits_valid. Reinit frame cache for lval_computed.
1700 * sh64-tdep.c (sh64_do_register): Update.
1701 * scm-valprint.c (scm_val_print): Add 'val' argument.
1702 * scm-lang.h (scm_val_print): Update.
1703 * python/python.h (apply_val_pretty_printer): Update.
1704 * python/py-prettyprint.c (apply_val_pretty_printer): Add 'val'
1705 argument. Call set_value_component_location.
1706 * printcmd.c (print_scalar_formatted): Update.
1707 * p-valprint.c (pascal_val_print): Add 'val' argument.
1708 (pascal_object_print_value_fields): Likewise.
1709 (pascal_object_print_value): Likewise.
1710 (pascal_object_print_static_field): Update.
1711 * p-lang.h (pascal_val_print): Update.
1712 (pascal_object_print_value_fields): Update.
1713 * mt-tdep.c (mt_registers_info): Update.
1714 * mi/mi-main.c (get_register): Update.
1715 (mi_cmd_data_evaluate_expression): Use common_val_print.
1716 * m2-valprint.c (m2_print_array_contents): Add 'val' argument.
1717 (m2_print_unbounded_array): Likewise.
1718 (m2_val_print): Likewise.
1719 * m2-lang.h (m2_val_print): Update.
1720 * language.h (struct language_defn) <la_val_print>: Add 'val'
1722 (LA_VAL_PRINT): Likewise.
1723 * language.c (unk_lang_val_print): Add 'val' argument.
1724 * jv-valprint.c (java_print_value_fields): Add 'val' argument.
1725 (java_val_print): Likewise.
1726 * jv-lang.h (java_val_print): Add 'val' argument.
1727 * infcmd.c (default_print_registers_info): Update.
1728 * f-valprint.c (f77_print_array_1): Add 'val' argument.
1729 (f77_print_array): Likewise.
1730 (f_val_print): Likewise.
1731 * f-lang.h (f_val_print): Add 'val' argument.
1732 * dwarf2loc.c (read_pieced_value): Use value_bitsize and
1734 <DWARF_VALUE_OPTIMIZED_OUT>: Don't print warning. Call
1735 set_value_optimized_out.
1736 (write_pieced_value): Use value_bitsize and value_bitpos.
1737 <default>: Don't exit loop.
1738 (check_pieced_value_validity): New function.
1739 (pieced_value_funcs): Reference check_pieced_value_validity,
1740 check_pieced_value_invalid.
1741 (copy_pieced_value_closure): Update.
1742 (check_pieced_value_bits): New function.
1743 (check_pieced_value_invalid): New function.
1744 * d-valprint.c (dynamic_array_type): Add 'val' argument.
1745 (d_val_print): Likewise.
1746 * d-lang.h (d_val_print): Update.
1747 * cp-valprint.c (cp_print_value_fields): Add 'val' argument.
1748 (cp_print_value_fields_rtti): Likewise.
1749 (cp_print_value): Likewise.
1750 (cp_print_static_field): Update.
1751 * c-valprint.c (c_val_print): Add 'val' argument.
1752 (c_value_print): Update.
1753 * c-lang.h (c_val_print): Update.
1754 (cp_print_value_fields): Likewise.
1755 (cp_print_value_fields_rtti): Likewise.
1756 * ada-valprint.c (struct ada_val_print_args): Remove.
1757 (val_print_packed_array_elements): Add 'val' argument.
1758 (ada_val_print): Likewise. Rewrite.
1759 (ada_val_print_stub): Remove.
1760 (ada_val_print_array): Add 'val' argument.
1761 (ada_val_print_1): Likewise.
1762 (print_variant_part): Likewise.
1763 (ada_value_print): Update.
1764 (print_record): Add 'val' argument.
1765 (print_field_values): Likewise.
1766 * ada-lang.h (ada_val_print): Update.
1768 2010-06-11 Tom Tromey <tromey@redhat.com>
1770 * vec.h (VEC_cleanup): New macro.
1771 (DEF_VEC_ALLOC_FUNC_I): Update.
1772 (DEF_VEC_ALLOC_FUNC_P): Likewise.
1773 (DEF_VEC_ALLOC_FUNC_O): Likewise.
1774 * dwarf2loc.c (struct axs_var_loc): Remove.
1775 (unimplemented): New function.
1776 (translate_register): Likewise.
1777 (access_memory): Likewise.
1778 (compile_dwarf_to_ax): Likewise.
1779 (dwarf2_tracepoint_var_loc): Remove.
1780 (dwarf2_tracepoint_var_access): Likewise.
1781 (dwarf2_tracepoint_var_ref): Likewise.
1782 (locexpr_tracepoint_var_ref): Use compile_dwarf_to_ax.
1783 (loclist_tracepoint_var_ref): Likewise.
1784 * dwarf2expr.h (dwarf_expr_require_composition): Declare.
1785 * dwarf2expr.c (dwarf_expr_require_composition): Rename from
1786 require_composition. No longer static.
1787 (execute_stack_op): Update.
1788 * ax-gdb.h (trace_kludge): Declare.
1790 2010-06-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1792 * breakpoint.c (breakpoint_restore_shadows): New OWNER comment.
1793 (should_be_inserted): Return zero also on NULL OWNER.
1794 (breakpoint_program_space_exit): New OWNER comment.
1795 (insert_breakpoint_locations): Extend comment for OWNER.
1796 (remove_breakpoint_1, remove_breakpoint): Assert on OWNER.
1797 (breakpoint_init_inferior, breakpoint_here_p, breakpoint_thread_match):
1799 (print_it_typical): Return PRINT_UNKNOWN on NULL OWNER.
1800 (watchpoint_check): New assert on BREAKPOINT_AT and OWNER.
1801 (bpstat_check_location): New assert on OWNER.
1802 (bpstat_check_watchpoint, bpstat_check_breakpoint_conditions): Move BL
1803 and B initializations to the code block. New assert on them.
1804 (print_one_breakpoint_location): New OWNER comment.
1805 (watchpoint_locations_match): Assert on OWNER.
1806 (breakpoint_locations_match): Move HW_POINT1 and HW_POINT2
1807 initializations to the code block. New assert on OWNER.
1808 (set_breakpoint_location_function): New assert on OWNER.
1809 (disable_breakpoints_in_shlibs, disable_breakpoints_in_unloaded_shlib)
1810 (bp_location_compare, update_global_location_list)
1811 (update_global_location_list): New OWNER comment.
1813 2010-06-09 Ulrich Weigand <uweigand@de.ibm.com>
1815 * Makefile.in (HFILES_NO_SRCDIR): Remove config/i386/nm-linux.h
1817 2010-06-09 Ulrich Weigand <uweigand@de.ibm.com>
1819 * config/nm-linux.h (struct target_ops): Remove forward declaration.
1820 (lin_thread_get_thread_signals): Remove prototype.
1821 (GET_THREAD_SIGNALS): Remove.
1822 * linux-nat.h (lin_thread_get_thread_signals): Add prototype.
1823 * linux-thread-db.c (check_thread_signals): Directly call
1824 lin_thread_get_thread_signals; do not check GET_THREAD_SIGNALS.
1826 2010-06-09 Ulrich Weigand <uweigand@de.ibm.com>
1828 * gregset.h (GDB_FPXREGSET_T): Remove.
1829 (gdb_fpxregset_t): Likewise.
1830 (supply_fpxregset): Remove prototype.
1831 (fill_fpxregset): Likewise.
1832 * i386-linux-nat.c (supply_fpxregset): Remove.
1833 (fill_fpxregset): Likewise.
1834 (fetch_fpxregs): Inline supply_fpxregset call.
1835 (store_fpxregs): Inline fill_fpxregset call.
1837 * config/i386/linux.mh: Set NAT_FILE to config/nm-linux.h.
1838 * config/i386/nm-linux.h: Remove file.
1840 2010-06-09 Michael Snyder <msnyder@vmware.com>
1842 * target.c (update_current_target): Fix spelling error in comment.
1843 (target_mourn_inferior): Fix spelling error in error message.
1845 2010-06-08 Paul Hilfinger <hilfingr@adacore.com>
1847 * dictionary.h (dict_iter_name_first, dict_iter_name_next): Refer to
1848 SYMBOL_SEARCH_NAME, not SYMBOL_BEST_NAME, in comments.
1850 2010-06-08 Michael Snyder <msnyder@vmware.com>
1852 * remote.c (remote_close): Set inferior_ptid to null_ptid.
1854 2010-06-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1856 * configure.ac <"${have_libpython}" != no>: New workaround of
1858 * configure: Regenerate.
1860 2010-06-08 Hui Zhu <teawater@gmail.com>
1862 * record.c (record_wait): Move signal out of replay code.
1864 2010-06-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1867 * dwarf2-frame.c (no_dwarf_call): New function.
1868 (execute_stack_op): Set CTX->DWARF_CALL.
1869 * dwarf2expr.c (execute_stack_op) <DW_OP_call2, DW_OP_call4>: New.
1870 * dwarf2expr.h (struct dwarf_expr_context) <dwarf_call>: New.
1871 (struct dwarf_expr_context) <get_subr>: Remove the #if0-ed field.
1872 * dwarf2loc.c (per_cu_dwarf_call, dwarf_expr_dwarf_call): New functions.
1873 (dwarf2_evaluate_loc_desc): Initialize CTX->DWARF_CALL.
1874 (needs_frame_dwarf_call): New function.
1875 (dwarf2_loc_desc_needs_frame): Initialize CTX->DWARF_CALL.
1876 * dwarf2read.c (follow_die_offset): Based on former follow_die_ref.
1877 Update the comment. Move variables die, offset and error call to ...
1878 (follow_die_ref): ... a new function.
1879 (dwarf2_fetch_die_location_block): New function.
1880 * dwarf2loc.h (dwarf2_fetch_die_location_block): New prototype.
1882 2010-06-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1884 * dwarf2loc.c (struct dwarf_expr_baton) Replace objfile by per_cu.
1885 (dwarf_expr_tls_address): Use per_cu instead of objfile.
1886 (dwarf2_evaluate_loc_desc): Drop initialization of BATON.OBJFILE.
1887 Initialize new BATON.PER_CU. Adjust CTX->GDBARCH initialization for
1889 (struct needs_frame_baton): New field per_cu.
1890 (dwarf2_loc_desc_needs_frame): Initialize new BATON.PER_CU.
1891 * dwarf2read.c (struct dwarf2_per_cu_data) <cu>: Extend the comment.
1893 2010-06-07 Sami Wagiaalla <swagiaal@redhat.com>
1895 * cp-support.c (make_symbol_overload_list_namespace): Only search
1896 static and global blocks.
1897 (make_symbol_overload_list_block): New function.
1898 (make_symbol_overload_list): Separate namespace search from block
1900 (make_symbol_overload_list_qualified): Use
1901 make_symbol_overload_list_block.
1903 2010-06-07 Sami Wagiaalla <swagiaal@redhat.com>
1905 * value.h: Created oload_search_type enum.
1906 (find_overload_match): Use oload_search_type enum.
1907 * valops.c (find_overload_match): Support combined member and
1909 * eval.c (evaluate_subexp_standard): Calls to
1910 find_overload_match now use oload_search_type enum.
1911 (oload_method_static): Verify index is a proper value.
1912 * valarith.c (value_user_defined_cpp_op): Search for and handle
1913 both member and non-member operators.
1914 (value_user_defined_cpp_op): New function.
1915 (value_user_defined_op): New function.
1916 (value_x_unop): Use value_user_defined_op.
1917 (value_x_binop): Ditto.
1918 * cp-support.c (make_symbol_overload_list_using): Added block
1920 Add check for namespace aliases and imported declarations.
1922 2010-06-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1924 * breakpoint.h (owner): Extend the comment.
1926 2010-06-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1928 Clear stale specific bp_location from former whole breakpoint.
1929 * breakpoint.c (delete_breakpoint): Move the stale referencing clear
1931 (free_bp_location): ... here. Rename there the called function to
1932 bpstat_remove_bp_location_callback.
1933 (bpstat_remove_breakpoint_callback): Rename to ...
1934 (bpstat_remove_bp_location_callback): ... here, change DATA resolution
1935 to struct bp_location. Change the called function to
1936 bpstat_remove_bp_location. Create new declaration for the function.
1937 (bpstat_remove_breakpoint): Rename to ...
1938 (bpstat_remove_bp_location): ..., change the parameter to loc, adjust
1939 code for the new parameter type.
1941 2010-06-07 Nathan Sidwell <nathan@codesourcery.com>
1943 * README: Make version-agnostic.
1945 2010-06-05 Jan Kratochvil <jan.kratochvil@redhat.com>
1947 Fix duplicate types for single DIE.
1948 * dwarf2read.c (read_structure_type): Move set_descriptive_type after
1950 (read_array_type): Remove type initialization. Recheck get_die_type
1951 after initial die_type. Move set_die_type before set_descriptive_type.
1952 (read_set_type): New variable domain_type. Recheck get_die_type after
1953 initial die_type. Move attr initialization later.
1954 (read_tag_pointer_type, read_tag_reference_type): New variable
1955 target_type. Recheck get_die_type after initial die_type.
1956 (read_tag_ptr_to_member_type): Recheck get_die_type after initial
1957 die_type and die_containing_type.
1958 (read_tag_const_type, read_tag_volatile_type, read_subroutine_type):
1959 Recheck get_die_type after initial die_type.
1960 (read_subrange_type): Recheck get_die_type after initial die_type.
1961 Move set_die_type before set_descriptive_type.
1962 (set_die_type): Extend the function comment. Call complaint if DIE has
1963 some type already set.
1965 2010-06-05 Vladimir Prus <vladimir@codesourcery.com>
1967 * mi/mi-main.c (mi_cmd_list_thread_groups): Adjust
1968 for current naming of thread groups (iN, not N).
1970 2010-06-04 Sergio Durigan Junior <sergiodj@redhat.com>
1972 * ada-lang.c (ada_operator_length): Constify `struct expression'.
1973 * parse.c (operator_length): Likewise.
1974 (operator_length_standard): Likewise.
1975 * parser-defs.h (operator_length): Likewise.
1976 (operator_length_standard): Likewise.
1977 (struct exp_descriptor <operator_length>): Likewise.
1979 2010-06-04 Doug Evans <dje@google.com>
1981 Add support for enabling/disabling individual pretty-printers.
1982 * python/py-prettyprint.c (search_pp_list): Skip disabled printers.
1983 * python/python-internal.h (gdbpy_enabled_cst): Declare.
1984 * python/python.c (gdbpy_enabled_cst): Define.
1985 (_initialize_python): Initialize gdbpy_enabled_cst.
1988 2010-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1990 * breakpoint.c (update_global_location_list): Fix comment typo.
1992 2010-06-04 Hui Zhu <teawater@gmail.com>
1994 * dwarf2loc.c (disassemble_dwarf_expression): Change ul to l.
1996 2010-06-03 Doug Evans <dje@google.com>
1998 * configure.ac: Don't fail if python is unusable when
1999 configured with --with-python=auto.
2000 * configure: Regenerate.
2002 2010-06-03 Sami Wagiaalla <swagiaal@redhat.com>
2004 * dwarf2read.c (new_symbol): Remove redundant naming of symbol.
2006 2010-06-03 Pierre Muller <muller@ics.u-strasbg.fr>
2008 * valprint.h (get_array_bounds): Change low and high parameter types
2010 * valprint.c (get_array_bounds): Use get_discrete_bounds call to
2012 (val_print_array_elements): Adapt to change above.
2013 * ada-valprint.c (print_optional_low_bound): Adapt to change above.
2014 * p-valprint.c (pascal_val_print): Likewise.
2016 2010-06-02 Jan Kratochvil <jan.kratochvil@redhat.com>
2018 * symfile.c (init_filename_language_table): New extensions .for, .FOR,
2019 .ftn, .FTN, .fpp, .FPP, .f90, .F90, .f95, .F95, .f03, .F03, .f08 and
2022 2010-06-02 Jan Kratochvil <jan.kratochvil@redhat.com>
2024 Support DW_TAG_module as separate namespaces.
2025 * dwarf2read.c (typename_concat): New parameter physname.
2026 (read_module_type): New function and declaration.
2027 (scan_partial_symbols): Scan also DW_TAG_module children.
2028 (partial_die_parent_scope): Accept scope even from DW_TAG_module. Pass
2029 to typename_concat backward compatible physname value 0.
2030 (partial_die_full_name, read_namespace_type): Pass to typename_concat
2031 backward compatible physname value 0.
2032 (add_partial_module, read_module): Remove FIXME comment.
2033 (process_die) <DW_TAG_module>: Set PROCESSING_HAS_NAMESPACE_INFO.
2034 (die_needs_namespace) <DW_TAG_variable>: Allow returning true even for
2035 DIEs under DW_TAG_module.
2036 (dwarf2_compute_name): Move the ada block for DW_AT_linkage_name and
2037 DW_AT_MIPS_linkage_name first, extend it for language_fortran
2038 && physname and return there instead of just setting NAME. Extend
2039 the main block for language_fortran. Pass physname parameter to the
2040 typename_concat call.
2041 (read_import_statement, read_func_scope, get_scope_pc_bounds)
2042 (load_partial_dies, determine_prefix): Support also DW_TAG_module.
2043 (new_symbol): Fill in cplus_specific.demangled_name if it is still
2044 missing from SYMBOL_SET_NAMES in the language_fortran case.
2045 (new_symbol) <DW_TAG_variable>: Force LOC_UNRESOLVED for gfortran module
2047 (read_type_die) <DW_TAG_module>: New.
2048 (MAX_SEP_LEN): Increase to 7.
2049 (typename_concat): New parameter physname. New variable lead. Support
2050 also language_fortran.
2051 * f-exp.y (yylex): Consider : also as a symbol name character class.
2052 * f-lang.c: Include cp-support.h.
2053 (f_word_break_characters, f_make_symbol_completion_list): New functions.
2054 (f_language_defn): Use cp_lookup_symbol_nonlocal,
2055 f_word_break_characters and f_make_symbol_completion_list.
2056 * f-typeprint.c (f_type_print_base) <TYPE_CODE_MODULE>: New.
2057 * gdbtypes.h (enum type_code) <TYPE_CODE_MODULE>: New.
2058 * symtab.c (symbol_init_language_specific): Support language_fortran.
2059 (symbol_find_demangled_name): New comment on language_fortran.
2060 (symbol_natural_name, symbol_demangled_name): Use demangled_name even
2061 for language_fortran.
2062 (lookup_symbol_aux_local): Check imports also for language_fortran.
2063 (default_make_symbol_completion_list): Rename to ...
2064 (default_make_symbol_completion_list_break_on): ... this name. New
2065 parameter break_on, use it.
2066 (default_make_symbol_completion_list): New stub.
2067 * symtab.h (default_make_symbol_completion_list_break_on): New
2070 2010-06-02 Joel Brobecker <brobecker@adacore.com>
2072 * remote.c (remote_get_noisy_reply): Remove trailing "\n" in call
2075 2010-06-02 Jan Kratochvil <jan.kratochvil@redhat.com>
2077 * dwarf2read.c (typename_concat): Add const to the variable sep.
2079 2010-06-02 Tom Tromey <tromey@redhat.com>
2081 * dwarf2loc.h (dwarf2_per_cu_data): Declare.
2082 * dwarf2read.c (dwarf_stack_op_name): No longer static. Return
2083 type is const. Add 'def' argument. Add missing operators, remove
2085 (decode_locdesc): Update.
2086 (dwarf2_always_disassemble): New global.
2087 (show_dwarf2_always_disassemble): New function.
2088 (_initialize_dwarf2_read): Add always-disassemble.
2089 (dwarf2_per_cu_offset_size): New function.
2090 * dwarf2loc.c (dwarf2_always_disassemble): Declare.
2091 (piece_end_p): New function.
2092 (locexpr_describe_location_piece): Replace 'size' argument with
2093 'end'. Use piece_end_p. Rewrite recognition of TLS. Recognize
2094 some constants. Remove errors.
2095 (disassemble_dwarf_expression): New function.
2096 (locexpr_describe_location_1): Use disassemble_dwarf_expression.
2097 Add 'offset_size' argument.
2098 (loclist_describe_location): Change output formatting.
2099 * dwarf2expr.h (dwarf_stack_op_name): Declare.
2101 2010-06-02 Sami Wagiaalla <swagiaal@redhat.com>
2103 * cp-support.c (make_symbol_overload_list_adl_namespace): Handle
2104 anonymous type case.
2106 2010-06-02 Pierre Muller <muller@ics.u-strasbg.fr>
2108 * dwarf2read.c (read_subrange_type): Handle missing base type
2109 according to Dwarf-2 specifications.
2111 2010-06-01 Sergio Durigan Junior <sergiodj@redhat.com>
2113 * expprint.c (print_subexp_standard): Remove exp_opcodes BINOP_INCL,
2115 (op_name_standard): Remove exp_opcodes BINOP_INCL, BINOP_EXCL,
2116 UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH.
2117 (dump_subexp_body_standard): Remove exp_opcodes BINOP_INCL,
2118 BINOP_EXCL, UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH, UNOP_CARD,
2119 UNOP_CHMAX, UNOP_CHMIN.
2120 * expression.h (enum exp_opcode) <BINOP_INCL, BINOP_EXCL,
2121 UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH, UNOP_CARD, UNOP_CHMAX,
2122 UNOP_CHMIN>: Remove opcodes.
2124 2010-06-01 Pierre Muller <muller@ics.u-strasbg.fr>
2126 * dwarf2read.c (read_func_scope): Do not complain for
2127 external function if bounds are not found.
2129 2010-06-01 Pedro Alves <pedro@codesourcery.com>
2131 * NEWS: Mention gdbserver fast tracepoints support.
2133 2010-05-31 Pierre Muller <muller@ics.u-strasbg.fr>
2135 * windows-nat.c (GetConsoleFontSize, GetCurrentConsoleFont):
2137 (windows_set_console_info): New function.
2138 (windows_create_inferior): Call windows_set_console_info
2139 if NEW_CONSOLE is true.
2140 (bad_GetCurrentConsoleFont, bad_GetConsoleFontSize): New functions.
2141 (_initialize_loadable): Initialize GetConsoleFontSize and
2142 GetCurrentConsoleFont.
2144 2010-05-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2146 * Makefile.in (RDYNAMIC): New.
2147 (SFILES): Add proc-service.list.
2148 * config/alpha/alpha-linux.mh (NAT_CDEPS): New.
2149 (LOADLIBES): Replace -rdynamic by $(RDYNAMIC).
2150 * config/arm/linux.mh: Likewise.
2151 * config/i386/linux.mh: Likewise.
2152 * config/i386/linux64.mh: Likewise.
2153 * config/ia64/linux.mh: Likewise.
2154 * config/m32r/linux.mh: Likewise.
2155 * config/m68k/linux.mh: Likewise.
2156 * config/mips/linux.mh: Likewise.
2157 * config/pa/linux.mh: Likewise.
2158 * config/powerpc/linux.mh: Likewise.
2159 * config/powerpc/ppc64-linux.mh: Likewise.
2160 * config/s390/s390.mh: Likewise.
2161 * config/sparc/linux.mh: Likewise.
2162 * config/sparc/linux64.mh: Likewise.
2163 * config/xtensa/linux.mh: Likewise.
2164 * configure.ac: New RDYNAMIC on native host and GCC.
2165 (solaris*): Replace -Wl,-export-dynamic by $RDYNAMIC.
2166 * configure: Regenerate.
2167 * proc-service.list: New.
2169 2010-05-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2171 * linux-nat.c (linux_nat_core_of_thread_1): Fix crash on invalid
2174 2010-05-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2176 * linux-nat.c (linux_nat_wait_1): Do not call
2177 linux_nat_core_of_thread_1 on TARGET_WAITKIND_EXITED or
2178 TARGET_WAITKIND_SIGNALLED.
2180 2010-05-27 Joel Brobecker <brobecker@adacore.com>
2182 * ada-lang.c (ada_inferior_data): New struct.
2183 (ada_inferior_data): New static global.
2184 (ada_inferior_data_cleanup, get_ada_inferior_data, ada_inferior_exit)
2185 (ada_get_tsd_type): New functions.
2186 (ada_tag_name_2): Use ada_get_tsd_type instead of ada_find_any_type
2187 to look the tsd type up.
2188 (_initialize_ada_language): Attach ada_inferior_exit to inferior_exit
2189 event. Set ada_inferior_data.
2191 2010-05-27 Pedro Alves <pedro@codesourcery.com>
2193 * remote.c (unpack_varlen_hex): Remove forward declaration.
2194 (remote_console_output): Make static, and add forward declaration.
2195 * remote.h: Drop FIXME comment.
2196 (unpack_varlen_hex): Declare.
2197 (remote_console_output, remote_cisco_objfile_relocate)
2198 (deprecated_target_resume_hook, deprecated_target_wait_loop_hook):
2199 Delete declarations.
2200 * tracepoint.c: Include "remote.h".
2201 (unpack_varlen_hex): Delete declaration.
2203 2010-05-27 Tom Tromey <tromey@redhat.com>
2205 * dwarf2loc.c (struct piece_closure) <refc>: New field.
2206 (allocate_piece_closure): Initialize refc.
2207 (copy_pieced_value_closure): Use refc.
2208 (free_pieced_value_closure): Likewise.
2210 2010-05-27 Tom Tromey <tromey@redhat.com>
2212 * arm-tdep.c (push_stack_item): 'contents' now const.
2213 (arm_push_dummy_call): Make 'val' const. Use value_contents, not
2214 value_contents_writeable. Introduce new temporary.
2216 2010-05-27 Tom Tromey <tromey@redhat.com>
2218 * findcmd.c (parse_find_args): Use value_contents, not
2221 2010-05-27 Tom Tromey <tromey@redhat.com>
2223 * alpha-tdep.c (alpha_push_dummy_call): Make alpha_arg.contents
2224 const. Use value_contents, not value_contents_writeable.
2226 2010-05-27 Joel Brobecker <brobecker@adacore.com>
2228 * ada-lang.c (ensure_lval): Replace call to value_contents_raw
2229 by call to value_contents.
2231 2010-05-27 Ozkan Sezer <sezeroz@gmail.com>
2233 * MAINTAINERS: Add myself for write after approval privileges.
2235 2010-05-26 Doug Evans <dje@google.com>
2237 Allow python to find its files if moved from original location.
2238 * acinclude.m4 (GDB_AC_DEFINE_RELOCATABLE): New function.
2239 (GDB_AC_WITH_DIR): Call it.
2240 * configure.ac: Define WITH_PYTHON_PATH if we can find the
2241 python installation directory.
2242 * config.in: Regenerate.
2243 * configure: Regenerate.
2244 * defs.h (python_libdir): Declare.
2245 * main.c (python_libdir): Define.
2246 (captured_main): Initialize python_libdir.
2247 * python/python.c (_initialize_python): #ifdef WITH_PYTHON_PATH,
2248 call Py_SetProgramName to make sure python can find its libraries
2251 * configure.ac: Try to use python's distutils to fetch compilation
2253 * configure: Regenerate.
2254 * python/python-config.py: New file.
2256 2010-05-26 Ozkan Sezer <sezeroz@gmail.com>
2258 * ser-tcp.c (net_open): Check error return from socket() call by its
2259 equality to -1 not by it being negative.
2260 (net_close): Likewise.
2262 2010-05-26 Pedro Alves <pedro@codesourcery.com>
2264 * NEWS: Mention the `qRelocInsn' feature.
2265 * gdbarch.sh (relocate_instruction): New.
2266 * amd64-tdep.c (rip_relative_offset): New.
2267 (append_insns): New.
2268 (amd64_relocate_instruction): New.
2269 (amd64_init_abi): Install it.
2270 * i386-tdep.c (append_insns): New.
2271 (i386_relocate_instruction): New.
2272 (i386_gdbarch_init): Install it.
2273 * remote.c (remote_get_noisy_reply): Handle qRelocInsn requests.
2274 * gdbarch.h, gdbarch.c: Regenerate.
2276 2010-05-26 Tom Tromey <tromey@redhat.com>
2278 * dwarf2loc.h (struct dwarf2_locexpr_baton) <data>: Now const.
2279 (struct dwarf2_loclist_baton) <data>: Likewise.
2280 * dwarf2loc.c (find_location_expression): Constify return type.
2281 (dwarf2_evaluate_loc_desc): Make 'data' argument const.
2282 (dwarf2_loc_desc_needs_frame): Likewise.
2283 (loclist_read_variable): Constify.
2284 (loclist_describe_location): Likewise.
2285 (loclist_tracepoint_var_ref): Likewise.
2287 2010-05-25 Tom Tromey <tromey@redhat.com>
2289 * dwarf2loc.c (dwarf_expr_frame_base): Constify.
2290 (dwarf_expr_frame_base_1): Likewise.
2291 (read_pieced_value): Update.
2292 (needs_frame_frame_base): Constify.
2293 (dwarf2_tracepoint_var_loc): Likewise.
2294 (dwarf2_tracepoint_var_access): Likewise.
2295 (locexpr_describe_location_piece): Likewise.
2296 (locexpr_describe_location_1): Likewise.
2297 * dwarf2expr.h (struct dwarf_expr_context) <get_frame_base>:
2300 (struct dwarf_expr_piece) <v.literal.data>: Likewise.
2301 (dwarf_expr_eval, read_uleb128, read_sleb128)
2302 (dwarf2_read_address): Update.
2303 * dwarf2expr.c (dwarf_expr_eval): Constify.
2304 (read_uleb128): Likewise.
2305 (read_sleb128): Likewise.
2306 (dwarf2_read_address): Likewise.
2307 (require_composition): Likewise.
2308 (execute_stack_op): Likewise.
2309 * dwarf2-frame.h (struct dwarf2_frame_state_reg) <loc.exp>: Now a
2311 * dwarf2-frame.c (struct dwarf2_frame_state_reg_info) <cfa_exp>:
2313 (no_get_frame_base): Constify.
2314 (execute_stack_op): Likewise.
2315 (execute_cfa_program): Likewise.
2316 (read_encoded_value): Likewise.
2318 2010-05-25 Doug Evans <dje@google.com>
2320 * ser-pipe.c (pipe_open): Ignore SIGINTs in child.
2322 * event-loop.h (GDB_READABLE, GDB_WRITABLE, GDB_EXCEPTION): Move to ...
2323 * event-loop.c: ... here.
2324 * tui/tui-io.c (tui_readline_output): Rename parameter `code' to
2325 `error' for clarity.
2326 (tui_getc): Pass correct value for `error' parameter to
2327 tui_readline_output.
2329 Add python gdb.GdbError and gdb.string_to_argv.
2330 * NEWS: Document them.
2331 * python/py-cmd.c (cmdpy_function): Don't print a traceback if
2332 the exception is gdb.GdbError. Print a second traceback if there's
2333 an error computing the error message.
2334 (gdbpy_string_to_argv): New function.
2335 * python/py-utils.c (gdbpy_obj_to_string): New function.
2336 (gdbpy_exception_to_string): New function.
2337 * python/python-internal.h (gdbpy_string_to_argv): Declare.
2338 (gdbpy_obj_to_string, gdbpy_exception_to_string): Declare.
2339 (gdbpy_gdberror_exc): Declare.
2340 * python/python.c (gdbpy_gdberror_exc): New global.
2341 (_initialize_python): Initialize gdbpy_gdberror_exc and create
2343 (GdbMethods): Add string_to_argv.
2345 2010-05-21 Pierre Muller <muller@ics.u-strasbg.fr>
2347 * windows-nat.c (display_selector): Call GetLastError to give better
2348 failure explanation.
2350 2010-05-24 Pedro Alves <pedro@codesourcery.com>
2352 * config.in: Regenerate.
2354 2010-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
2357 * target.c (push_target): Return only void. Remove the return value
2359 * target.h (push_target): Return only void.
2361 2010-05-23 Pedro Alves <pedro@codesourcery.com>
2363 Update gnulib from latest git.
2364 (250b80067c1e1d8faa0c42fb572f721975b929c5)
2366 * gnulib/memcmp.c: Removed.
2367 * gnulib/memchr.valgrind: New.
2368 * gnulib/stddef.in.h: New.
2369 * gnulib/Makefile.am: Updated.
2370 * gnulib/memchr.c: Updated.
2371 * gnulib/memmem.c: Updated.
2372 * gnulib/stdint.in.h: Updated.
2373 * gnulib/str-two-way.h: Updated.
2374 * gnulib/string.in.h: Updated.
2375 * gnulib/wchar.in.h: Updated.
2377 * gnulib/extra/link-warning.h: Removed.
2378 * gnulib/extra/c++defs.h: New.
2379 * gnulib/extra/warn-on-use.h: New.
2380 * gnulib/extra/arg-nonnull.h: Updated.
2382 * gnulib/m4/extensions.m4: Updated.
2383 * gnulib/m4/gnulib-cache.m4: Updated.
2384 * gnulib/m4/gnulib-common.m4: Updated.
2385 * gnulib/m4/gnulib-comp.m4: Updated.
2386 * gnulib/m4/gnulib-tool.m4: Updated.
2387 * gnulib/m4/include_next.m4: Updated.
2388 * gnulib/m4/longlong.m4: Updated.
2389 * gnulib/m4/memchr.m4: Updated.
2390 * gnulib/m4/memmem.m4: Updated.
2391 * gnulib/m4/stdint.m4: Updated.
2392 * gnulib/m4/string_h.m4: Updated.
2393 * gnulib/m4/memcmp.m4: Removed.
2394 * gnulib/m4/onceonly_2_57.m4: Removed.
2395 * gnulib/m4/00gnulib.m4: New.
2396 * gnulib/m4/mmap-anon.m4: New.
2397 * gnulib/m4/multiarch.m4: New.
2398 * gnulib/m4/onceonly.m4: New.
2399 * gnulib/m4/stddef_h.m4: New.
2400 * gnulib/m4/warn-on-use.m4: New.
2401 * gnulib/m4/wchar.m4: Removed.
2402 * gnulib/m4/wchar_h.m4: New.
2403 * gnulib/m4/wchar_t.m4: New.
2404 * gnulib/m4/wint_t.m4: New.
2406 * aclocal.m4: Regenerate.
2407 * config.in: Likewise.
2408 * configure: Likewise.
2409 * gnulib/Makefile.in: Likewise.
2411 2010-05-21 Tom Tromey <tromey@redhat.com>
2413 * dwarf2loc.c (extract_bits_primitive): New function.
2414 (extract_bits): Likewise.
2415 (insert_bits): Likewise.
2416 (copy_bitwise): Likewise.
2417 (read_pieced_value): Do all operations in bits.
2418 (write_pieced_value): Likewise.
2419 * dwarf2expr.h (struct dwarf_expr_piece) <offset>: New field.
2420 * dwarf2expr.c (add_piece): New arguments bit_piece, offset.
2421 Always use xrealloc to resize piece array.
2422 (execute_stack_op) <DW_OP_reg0>: Handle DW_OP_bit_piece.
2423 <DW_OP_piece>: Update.
2424 <DW_OP_bit_piece>: New case.
2426 2010-05-21 Tom Tromey <tromey@redhat.com>
2428 * dwarf2loc.c (read_pieced_value): Exit loop when result is full.
2429 <DWARF_VALUE_OPTIMIZED_OUT>: New case.
2430 * dwarf2expr.h (enum dwarf_value_location)
2431 <DWARF_VALUE_OPTIMIZED_OUT>: New constant.
2432 * dwarf2expr.c (dwarf_expr_stack_empty_p): New function.
2433 (add_piece): Handle empty piece.
2434 (execute_stack_op) <DW_OP_piece>: Handle
2435 DWARF_VALUE_OPTIMIZED_OUT.
2437 2010-05-21 Tom Tromey <tromey@redhat.com>
2439 * eval.c (evaluate_subexp_standard) <BINOP_SUBSCRIPT>: Call
2440 evaluate_subexp, not evaluate_subexp_with_coercion.
2442 2010-05-21 Pierre Muller <muller@ics.u-strasbg.fr>
2444 * dwarf2read.c (new_symbol): Handle DW_AT_variable_parameter
2447 2010-05-21 Tom Tromey <tromey@redhat.com>
2449 * dwarf2loc.c (read_pieced_value): Work properly when 'v' has an
2451 (write_pieced_value): Likewise.
2453 2010-05-21 Pierre Muller <muller@ics.u-strasbg.fr>
2455 * dwarf2read.c (process_die): Also allow DW_TAG_const_type
2456 and DW_TAG_volatile_type.
2457 (new_symbol): Likewise.
2459 2010-05-20 Pierre Muller <muller@ics.u-strasbg.fr>
2461 * p-valprint.c (pascal_val_print): Call get_array_bounds
2462 to obtain the number of elements in an array.
2464 2010-05-19 Doug Evans <dje@google.com>
2466 * python.c (gdbpy_print_stack): Ensure output ends with a newline.
2468 * python.c (source_python_script): Add comment.
2469 (source_python_script_for_objfile): Remove unnecessary call to
2472 2010-05-18 Jan Kratochvil <jan.kratochvil@redhat.com>
2473 Sergio Durigan Junior <sergiodj@redhat.com>
2476 * parse.c (exp_iterate): Use operator_length wrapper function.
2478 2010-05-18 Michael Snyder <msnyder@vmware.com>
2480 * ada-lang.c: White space.
2481 * ada-typeprint.c: White space.
2482 * ada-valprint.c: White space.
2483 * addrmap.c: White space.
2484 * auxv.c: White space.
2485 * ax-gdb.c: White space.
2487 2010-05-18 Hui Zhu <teawater@gmail.com>
2489 * linux-fork.c (inferior_call_waitpid_cleanup): Add check
2491 (inferior_call_waitpid): Move make_cleanup out of check.
2492 Check the return of waitpid.
2493 (delete_checkpoint_command): Add pptid to save fi->parent_ptid.
2495 2010-05-17 Michael Snyder <msnyder@vmware.com>
2497 * tui/tui.c: White space.
2498 * tui/tui-data.c: White space.
2499 * tui/tui-disasm.c: White space.
2500 * tui/tui-file.c: White space.
2501 * tui/tui-interp.c: White space.
2502 * tui/tui-main.c: White space.
2503 * tui/tui-out.c: White space.
2504 * tui/tui-regs.c: White space.
2505 * tui/tui-source.c: White space.
2506 * tui/tui-stack.c: White space.
2507 * tui/tui-win.c: White space.
2508 * tui/tui-winsource.c: White space.
2510 * procfs.c: White space.
2512 * python/py-auto-load.c: White space.
2513 * python/py-block.c: White space.
2514 * python/py-breakpoint.c: White space.
2515 * python/py-cmd.c: White space.
2516 * python/py-function.c: White space.
2517 * python/py-lazy-string.c: White space.
2518 * python/py-objfile.c: White space.
2519 * python/py-param.c: White space.
2520 * python/py-prettyprint.c: White space.
2521 * python/py-progspace.c: White space.
2522 * python/py-symtab.c: White space.
2523 * python/python.c: White space.
2524 * python/py-type.c: White space.
2525 * python/py-utils.c: White space.
2526 * python/py-value.c: White space.
2528 * mi/mi-cmd-break.c: White space.
2529 * mi/mi-cmd-env.c: White space.
2530 * mi/mi-cmds.c: White space.
2531 * mi/mi-cmd-stack.c: White space.
2532 * mi/mi-cmd-var.c: White space.
2533 * mi/mi-console.c: White space.
2534 * mi/mi-getopt.c: White space.
2535 * mi/mi-interp.c: White space.
2536 * mi/mi-main.c: White space.
2537 * mi/mi-out.c: White space.
2538 * mi/mi-parse.c: White space.
2540 * cli/cli-cmds.c: White space.
2541 * cli/cli-decode.c: White space.
2542 * cli/cli-dump.c: White space.
2543 * cli/cli-interp.c: White space.
2544 * cli/cli-logging.c: White space.
2545 * cli/cli-script.c: White space.
2546 * cli/cli-setshow.c: White space.
2548 * valarith.c: White space.
2549 * valops.c: White space.
2550 * valprint.c: White space.
2551 * value.c: White space.
2552 * varobj.c: White space.
2553 * xcoffread.c: White space.
2554 * xml-support.c: White space.
2555 * xml-tdesc.c: White space.
2557 2010-05-17 Andreas Schwab <schwab@redhat.com>
2560 * c-lang.c (c_printstr): Compute real length of NUL terminated
2563 2010-05-17 Joel Brobecker <brobecker@adacore.com>
2565 * parse.c (parse_exp_in_context): When block is not NULL, use
2566 its associated language to parse the expression instead of
2567 the current_language.
2569 2010-05-17 Joel Brobecker <brobecker@adacore.com>
2571 * jv-lang.c (java_lookup_class): Remove commented out code.
2572 (type_from_class): Likewise.
2573 (java_op_print_tab): Remove commented-out elements.
2575 2010-05-17 Joel Brobecker <brobecker@adacore.com>
2577 * ada-lang.c (to_fixed_range_type): The the raw index type as
2578 argument instead of the raw type name. Remove orig_type parameter.
2579 Update calls throughout.
2580 (ada_fixup_array_indexes_type): New function.
2581 (ada_array_bound_from_type): Add call to ada_fixup_array_indexes_type.
2582 * ada-lang.h (ada_fixup_array_indexes_type): Add declaration.
2583 * ada-typeprint.c (print_range_type): Renames print_range_type_named.
2584 Remove name parameter.
2585 (print_array_type): Add call to ada_fixup_array_indexes_type.
2586 Update calls to print_range_type.
2587 (ada_print_type): Update calls to print_range_type.
2589 2010-05-17 Pierre Muller <muller@ics.u-strasbg.fr>
2591 * dwarf2read.c (read_set_type): Set type length if
2592 DW_AT_byte_size attribute is present.
2594 2010-05-17 Pierre Muller <muller@ics.u-strasbg.fr>
2596 * p-valprint.c (pascal_val_print): Handle set type if range limits
2597 are undefined but size is known.
2599 2010-05-17 Pedro Alves <pedro@codesourcery.com>
2601 * procfs.c: Reformat.
2603 2010-05-16 Michael Snyder <msnyder@vmware.com>
2605 * target.c: White space.
2606 * target-descriptions.c: White space.
2607 * target-memory.c: White space.
2608 * thread.c: White space.
2609 * top.c: White space.
2610 * tracepoint.c: White space.
2611 * trad-frame.c: White space.
2612 * tramp-frame.c: White space.
2613 * ui-file.c: White space.
2614 * ui-out.c: White space.
2615 * user-regs.c: White space.
2616 * utils.c: White space.
2618 * scm-exp.c: White space.
2619 * scm-lang.c: White space.
2620 * scm-valprint.c: White space.
2621 * sentinel-frame.c: White space.
2622 * ser-base.c: White space.
2623 * ser-go32.c: White space.
2624 * serial.c: White space.
2625 * ser-mingw.c: White space.
2626 * ser-pipe.c: White space.
2627 * ser-tcp.c: White space.
2628 * ser-unix.c: White space.
2629 * solib.c: White space.
2630 * solib-darwin.c: White space.
2631 * solib-frv.c: White space.
2632 * solib-irix.c: White space.
2633 * solib-osf.c: White space.
2634 * solib-pa64.c: White space.
2635 * solib-som.c: White space.
2636 * solib-spu.c: White space.
2637 * solib-svr4.c: White space.
2638 * solib-target.c: White space.
2639 * source.c: White space.
2640 * stabsread.c: White space.
2641 * stack.c: White space.
2642 * std-regs.c: White space.
2643 * symfile.c: White space.
2644 * symmisc.c: White space.
2645 * symtab.c: White space.
2647 2010-05-16 Michael Snyder <msnyder@vmware.com>
2649 * source.c (_initialize_source): Add "rev" as an abbreviation
2650 for the "reverse-search" command.
2652 2010-05-16 Michael Snyder <msnyder@vmware.com>
2654 * record.c: White space.
2655 * regcache.c: White space.
2656 * reggroups.c: White space.
2657 * remote-fileio.c: White space.
2658 * remote-m32r-sdi.c: White space.
2659 * remote-mips.c: White space.
2660 * remote-sim.c: White space.
2661 * remote.c: White space.
2662 (process_g_packet): Remove orphan braces.
2664 2010-05-15 Michael Snyder <msnyder@vmware.com>
2666 * parse.c: White space.
2667 * p-lang.c: White space.
2668 * posix-hdep.c: White space.
2669 * printcmd.c: White space.
2670 * progspace.c: White space.
2671 * prologue-value.c: White space.
2672 * psymtab.c: White space.
2673 * p-typeprint.c: White space.
2674 * p-valprint.c: White space.
2676 * objc-lang.c: White space.
2677 * objfiles.c: White space.
2678 * observer.c: White space.
2679 * osabi.c: White space.
2680 * osdata.c: White space.
2682 * m2-lang.c: White space.
2683 * m2-valprint.c: White space.
2684 * macrocmd.c: White space.
2685 * macroexp.c: White space.
2686 * macroscope.c: White space.
2687 * macrotab.c: White space.
2688 * main.c: White space.
2689 * maint.c: White space.
2690 * mdebugread.c: White space.
2691 * memattr.c: White space.
2692 * minsyms.c: White space.
2693 * monitor.c: White space.
2695 2010-05-14 Michael Snyder <msnyder@vmware.com>
2697 * jv-lang.c: White space.
2698 * jv-typeprint.c: White space.
2699 * jv-valprint.c: White space.
2700 * language.c: White space.
2701 * libunwind-frame.c: White space.
2702 * linespec.c: White space.
2703 * linux-nat.c: White space.
2704 * linux-record.c: White space.
2705 * linux-thread-db.c: White space.
2707 * infcall.c: White space.
2708 * inf-child.c: White space.
2709 * infcmd.c: White space.
2710 * inferior.c: White space.
2711 * inf-loop.c: White space.
2712 * inflow.c: White space.
2713 * inline-frame.c: White space.
2714 * interps.c: White space.
2716 * gcore.c: White space.
2717 * gdb.c: White space.
2718 * gdbtypes.c: White space.
2719 * gnu-nat.c: White space.
2720 * gnu-v2-abi.c: White space.
2721 * gnu-v3-abi.c: White space.
2723 * findcmd.c: White space.
2724 * findvar.c: White space.
2725 * fork-child.c: White space.
2726 * frame-base.c: White space.
2727 * frame.c: White space.
2728 * frame-unwind.c: White space.
2729 * f-valprint.c: White space.
2731 * elfread.c: White space.
2732 * environ.c: White space.
2733 * eval.c: White space.
2734 * event-loop.c: White space.
2735 * event-top.c: White space.
2736 * exceptions.c: White space.
2737 * exec.c: White space.
2738 * expprint.c: White space.
2740 * dbxread.c: White space.
2741 * dcache.c: White space.
2742 * disasm.c: White space.
2743 * doublest.c: White space.
2744 * dsrec.c: White space.
2745 * dummy-frame.c: White space.
2746 * dwarf2expr.c: White space.
2747 * dwarf2-frame.c: White space.
2748 * dwarf2loc.c: White space.
2749 * dwarf2read.c: White space.
2751 2010-05-14 Phil Muldoon <pmuldoon@redhat.com>
2755 * python/py-value.c (valpy_hash): New function.
2756 (value_object_type): Register valpy_hash.
2758 2010-05-14 Hui Zhu <teawater@gmail.com>
2759 Michael Snyder <msnyder@vmware.com>
2761 * linux-fork.c (gdbthread.h): New include.
2762 (fork_info): Add parent_ptid.
2763 (inferior_call_waitpid_cleanup, inferior_call_waitpid): New
2765 (delete_checkpoint_command): Call inferior_call_waitpid.
2766 (checkpoint_command): Set parent_ptid.
2768 2010-05-13 Michael Snyder <msnyder@vmware.com>
2770 * dictionary.c: Re-indent to GNU coding standard.
2772 * charset.c: White space.
2773 * c-lang.c: White space.
2774 * cli-out.c: White space.
2775 * coffread.c: White space.
2776 * complaints.c: White space.
2777 * completer.c: White space.
2778 * corefile.c: White space.
2779 * corelow.c: White space.
2780 * cp-abi.c: White space.
2781 * cp-namespace.c: White space.
2782 * cp-support.c: White space.
2783 * cp-valprint.c: White space.
2784 * c-typeprint.c: White space.
2785 * c-valprint.c: White space.
2786 * blockframe.c: White space.
2787 * breakpoint.c: White space.
2788 * buildsym.c: White space.
2789 * blockframe.c: White space.
2790 * bcache.c: White space.
2791 * gdbarch.sh: White space, add blank lines.
2792 * arch-utils.c: Ditto.
2793 * gdbarch.c: Regenerate.
2794 * frame.c: White space, add blank lines.
2795 * stack.c: White space, add blank lines.
2796 (initialize_stack): Remove long-dead code.
2798 2010-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2801 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Change the parameter to type.
2802 (locexpr_read_variable, loclist_read_variable): Update the callers.
2804 2010-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2807 * dwarf2read.c (die_type, die_descriptive_type): Remove variable type.
2808 Remove check of NULL returned by tag_type_to_type.
2809 (die_containing_type): Remove variable type. Remove type_die variable
2810 initialization. Remove check of NULL returned by tag_type_to_type.
2812 2010-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
2815 * gdbtypes.c (lookup_struct_elt_type): Also lookup
2816 names of unnamed structures or unions.
2818 2010-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
2820 * procfs.c (proc_watchpoint_address): New function.
2821 (procfs_stopped_by_watchpoint): Remove useless check after
2822 find_procinfo_or_die call.
2823 (procfs_stopped_data_address): New function.
2824 (procfs_use_watchpoints): Register new watchpoint related function.
2826 2010-05-11 Tom Tromey <tromey@redhat.com>
2828 * eval.c (evaluate_subexp_standard): Revert inadvertent change.
2830 2010-05-10 Michael Snyder <msnyder@vmware.com>
2832 * utils.c: White space cleanup.
2834 2010-05-10 Tom Tromey <tromey@redhat.com>
2836 * eval.c (ptrmath_type_p): Add 'lang' argument.
2837 (evaluate_subexp_standard): Update.
2838 (evaluate_subexp_with_coercion): Update.
2839 * language.h (CAST_IS_CONVERSION): Add 'LANG' argument.
2841 2010-05-10 Michael Snyder <msnyder@vmware.com>
2843 * utils.c (do_fclose_cleanup) Restore local variable.
2845 2010-05-09 Doug Evans <dje@google.com>
2847 * record.c (init_record_core_ops): Rename record_core to record-core.
2849 2010-05-08 Joel Brobecker <brobecker@adacore.com>
2851 Implement task switching on pa-hpux.
2852 * inf-ttrace.c (inf_ttrace_get_ada_task_ptid): New function.
2853 (inf_ttrace_target): Set t->to_get_ada_task_ptid.
2855 2010-05-08 Pierre Muller <muller@ics.u-strasbg.fr>
2857 * valops.c (find_overload_match): Add missing i18n markup.
2859 2010-05-08 Pierre Muller <muller@ics.u-strasbg.fr>
2861 * p-exp.y (exp : SIZEOF '(' exp ')'): New rule.
2863 2010-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2865 * dwarf2read.c (typename_concat): Use (char *) NULL terminated stdarg
2866 list for the obconcat call.
2867 * mdebugread.c (parse_symbol): Likewise.
2868 * stabsread.c (define_symbol, read_member_functions, read_cpp_abbrev):
2870 * symfile.c (obconcat): Replace the s1, s2 and s3 parameters by `...'.
2871 New variable ap. Remove variables len and val.
2872 * symfile.h (obconcat): Likewise for the prototype.
2874 2010-05-07 Michael Snyder <msnyder@vmware.com>
2876 * python/python.c (execute_gdb_command): Remove unused variables.
2877 * python/py-block.c (gdbpy_block_for_pc): Remove unused variable.
2878 * python/py-breakpoint.c (gdbpy_breakpoint_created):
2879 Remove unused variable.
2880 * python/py-cmd.c (cmdpy_function): Remove unused variable.
2881 (cmdpy_completer): Remove unused variable.
2882 * python/py-frame.c (frapy_find_sal): Remove unused variable.
2883 * python/py-function.c (fnpy_call): Remove unused variable.
2884 * python/py-objfile.c (objfile_to_objfile_object):
2885 Remove unused variable.
2886 * python/py-param.c (parmpy_init): Remove unused variable.
2887 * python/py-prettyprint.c (apply_varobj_pretty_printer):
2888 Remove unused variable.
2889 (gdbpy_default_visualizer): Remove unused variable.
2890 * python/py-progspace.c (pspace_to_pspace_object):
2891 Remove unused variable.
2892 * python/py-symtab.c (symtab_and_line_to_sal_object):
2893 Remove unused variable.
2894 * python/py-type.c (typy_template_argument):
2895 Remove unused variable.
2896 * python/py-value.c (valpy_string): Remove unused variable.
2897 (convert_value_from_python): Remove unused variables.
2899 2010-05-07 Michael Snyder <msnyder@vmware.com>
2901 * valops.c (value_cast_pointers): Restore unused variable 'type1',
2902 and use it to compute variable 't1'.
2904 2010-05-07 Joel Brobecker <brobecker@adacore.com>
2906 * ada-lang.c (assign_aggregate): Remove unused variable.
2908 2010-05-07 Sami Wagiaalla <swagiaal@redhat.com>
2911 * valops.c (find_overload_match): Handle fsym == NULL case.
2912 Add int no_adl argument.
2913 (find_oload_champ_namespace_loop): Call make_symbol_overload_list_adl
2915 Add int no_adl argument.
2916 (find_oload_champ_namespace): Add int no_adl argument.
2917 * parse.c (operator_length_standard): Return length for OP_ADL_FUNC
2919 * expprint.c (op_name_standard): Added string for OP_ADL_FUNC case.
2920 * eval.c (evaluate_subexp_standard): Added OP_ADL_FUNC case.
2921 Evaluate arguments and use them to perform ADL lookup.
2922 Pass no_adl argument to find_overload_match.
2923 Disable adl lookup when evaluating a fully qualified OP_FUNCALL.
2924 * cp-support.h: Added prototype for
2925 make_symbol_overload_list_namespace.
2926 * cp-support.c (make_symbol_overload_list_namespace): New function.
2927 (make_symbol_overload_list_adl_namespace): New function.
2928 (make_symbol_overload_list_adl): New function.
2929 (make_symbol_overload_list_using): Moved code to add function to
2930 overload set to make_symbol_overload_list_namespace.
2931 * c-exp.y: create UNKNOWN_CPP_NAME token.
2932 Add parse rule for ADL functions.
2933 (classify_name): Recognize an UNKNOWN_CPP_NAME.
2935 2010-05-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2937 * fbsd-nat.c (fbsd_make_corefile_notes): Add cast to NULL used as
2940 2010-05-07 Joel Brobecker <brobecker@adacore.com>
2942 Implement task switching on solaris targets.
2943 * sol-thread.c (thread_db_find_thread_from_tid)
2944 (sol_get_ada_task_ptid): New functions.
2945 (init_sol_thread_ops): Set sol_thread_ops.to_get_ada_task_ptid.
2947 2010-05-07 Pedro Alves <pedro@codesourcery.com>
2949 * remote.c (remote_query_supported_append): Use reconcat.
2950 (remote_query_supported): Install a cleanup. Use reconcat.
2952 2010-05-07 Pedro Alves <pedro@codesourcery.com>
2954 * gdbarch.sh (qsupported): Delete.
2955 * gdbarch.h, gdbarch.c: Regenerate.
2956 * remote.c (remote_query_supported): Remove use of
2959 2010-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
2961 * xml-syscall.c (syscall_start_syscalls_info): Remove unused
2964 2010-05-06 Michael Snyder <msnyder@vmware.com>
2966 * xml-support.c (xinclude_start_include): Delete unused variable.
2967 (xml_process_xincludes): Delete unused variable.
2968 * xml-syscall.c (syscall_parse_xml): Delete unused variable.
2969 * target-descriptions.c (tdesc_gdb_type): Delete unused variable.
2970 (tdesc_find_arch_register): Delete unused variable.
2971 (tdesc_use_registers): Delete unused variable.
2972 * xml-tdesc.c (tdesc_start_target): Delete unused variable.
2973 * inferior.c (print_inferior): Delete unused variable.
2974 * record.c (record_open_1): Delete unused variable.
2975 (record_restore): Delete unused variable.
2976 (cmd_record_save): Delete unused variable.
2977 * gcore.c (derive_heap_segment): Delete unused variable.
2978 (objfile_find_memory_regions): Use unused variable.
2979 * jit.c (jit_inferior_init): Delete unused variable.
2980 * progspace.c (clone_program_space): Delete unused variable.
2981 (pspace_empty_p): Delete unused variable.
2983 * frame-unwind.c (frame_unwind_find_by_frame):
2984 Delete unused variable.
2985 * gnu-v2-abi.c (gnuv2_value_rtti_type): Delete unused variable.
2986 * cp-support.c (mangled_name_to_comp): Delete unused variable.
2987 (method_name_from_physname): Delete unused variable.
2988 (cp_func_name): Delete unused variable.
2989 (cp_validate_operator): Delete unused variable.
2990 * cp-namespace.c (cp_scan_for_anonymous_namespaces):
2991 Delete unused variable.
2992 * trad-frame.c (trad_frame_get_prev_register):
2993 Delete unused variable.
2994 * tramp-frame.c (tramp_frame_cache): Delete unused variable.
2996 * serial.c (serial_for_fd): Delete unused variable.
2997 * mdebugread.c (psymtab_to_symtab_1): Delete unused variable.
2998 * top.c (execute_command): Delete unused variable.
2999 (init_main): Delete unused variable.
3000 * utils.c (do_fclose_cleanup): Delete unused variable.
3001 (do_all_inferior_continuations): Delete unused variable.
3002 (initialize_utils): Delete unused variable.
3003 (internal_problem_mode): Delete unused global.
3004 * frame.c (get_prev_frame): Delete unused global.
3005 (get_frame_locals_address): Delete unused global.
3006 (get_frame_args_address): Delete unused global.
3008 * p-typeprint.c (pascal_type_print_base): Delete unused variable.
3009 (pascal_type_print_varspec_prefix): Delete unused variable.
3010 * f-typeprint.c (f_type_print_base): Delete unused variable.
3011 (f_type_print_varspec_suffix): Delete unused variable.
3012 * m2-typeprint.c (m2_print_type): Delete unused variable.
3013 (m2_long_set): Delete unused variable.
3014 * ada-valprint.c (ada_val_print_1): Delete unused variable.
3015 * d-valprint.c (dynamic_array_type): Delete unused variable.
3016 * f-valprint.c (f77_get_dynamic_length_of_aggregate):
3017 Delete unused variable.
3018 (f77_create_arrayprint_offset_tbl): Delete unused variable.
3019 * m2-valprint.c (m2_val_print): Delete unused variable.
3021 * ui-out.c (ui_out_field_int): Delete unused variable.
3022 (ui_out_field_fmt_int): Delete unused variable.
3023 * varobj.c (varobj_list_children): Delete unused variable.
3024 (varobj_set_value): Delete unused variable.
3025 (install_new_value_visualizer): Delete unused variable.
3026 (varobj_set_visualizer): Delete unused variable.
3027 (varobj_update): Delete unused variable.
3028 (varobj_editable_p): Delete unused variable.
3029 (c_value_of_root): Delete unused variable.
3030 (cplus_describe_child): Delete unused variable.
3032 * ada-lang.c (add_defn_to_vec): Delete unused variable.
3033 (decode_constrained_packed_array_type): Delete unused variable.
3034 (add_defn_to_vec): Delete unused variable.
3035 (symbol_completion_match): Delete unused variable.
3036 (value_tag_from_contents_and_address): Delete unused variable.
3037 (ada_evaluate_subexp): Delete unused variable.
3038 * c-lang.c (classify_type): Delete unused variable.
3039 * f-lang.c (f_printstr): Delete unused variable.
3040 * objc-lang.c (objc_printstr): Delete unused variable.
3041 * ada-tasks.c (get_known_tasks_addr): Delete unused variable.
3042 * jv-lang.c (type_from_class): ifdef unused variable.
3043 (java_class_name_from_physname): Delete unused variable.
3044 * m2-lang.c (m2_printstr): Delete unused variable.
3046 * objfiles.c (objfile_relocate): Delete unused variable.
3047 * maint.c (_initialize_maint_cmds): Delete unused variable.
3048 * demangle.c (_initialize_demangler): Delete unused variable.
3049 * corefile.c (reopen_exec_file): Delete unused variable.
3050 * dwarf2expr.c (dwarf2_read_address): Delete unused variable.
3051 * dwarf2-frame.c (decode_frame_entry): Delete unused variable.
3053 * osabi.c (_initialize_gdb_osabi): Delete unused variable.
3054 * memattr.c (mem_delete): Delete unused variable.
3055 (invalidate_target_mem_regions): Delete unused variable.
3056 * mem-break.c (default_memory_insert_breakpoint):
3057 Delete unused variable.
3058 * target.c (target_get_osdata): Delete unused variable.
3059 * parse.c (length_of_subexp): Delete unused variable.
3060 (prefixify_subexp): Delete unused variable.
3061 (exp_iterate): Delete unused variable.
3062 * reverse.c (delete_bookmark_command): Delete unused variable.
3064 * macrocmd.c (_initialize_macrocmd): Delete unused variable.
3065 * macroexp.c (gather_arguments): Delete unused variable.
3066 (substitute_args): Delete unused variable.
3067 * completer.c (gdb_completer_loc_break_characters): Unused, delete.
3068 * gdbarch.sh (gdbarch_printable_names): Delete unused variable.
3069 (_initialize_gdbarch): Delete unused variable.
3070 * gdbarch.c, gdbarch.h: Regenerate.
3071 * arch-utils.c (initialize_current_architecture):
3072 Delete unused variable.
3073 (_initialize_gdbarch_utils): Delete unused variable.
3074 * gdbtypes.c (make_cv_type): Delete unused variable.
3075 (make_type_with_address_space): Delete unused variable.
3077 * linespec.c (decode_compound): Delete unused variable.
3078 * dictionary.c (iterator_next_hashed): Delete unused variable.
3079 * infcall.c (call_function_by_hand): Delete unused variable.
3080 * infcmd.c (step_1): Delete unused variable.
3081 (registers_info): Delete unused variable.
3082 (attach_command): Delete unused variable.
3083 * infrun.c (follow_exec): Delete unused variable.
3084 (handle_step_into_function_backwards): Delete unused variable.
3085 (_initialize_infrun): Delete unused variable.
3086 * stack.c (parse_frame_specification_1): Delete unused variable.
3087 (frame_info): Delete unused variable.
3088 (backtrace_command_1): Delete unused variable.
3089 (catch_info): Delete unused variable.
3091 * eval.c (evaluate_subexp_standard): Delete unused variable.
3092 * valops.c (value_cast_pointers): Delete unused variable.
3093 (value_dynamic_cast): Delete unused variable.
3094 (value_array): Delete unused variable.
3095 (find_overload_match): Delete unused variable.
3096 * valarith.c (value_subscript): Delete unused variable.
3097 (value_binop): Delete unused variable.
3098 * valprint.c (_initialize_valprint): Delete unused variable.
3099 * printcmd.c (print_command_1): Delete unused variable.
3100 (address_info): Delete unused variable.
3101 (printf_command): Delete unused variable.
3103 * auxv.c (target_auxv_search): Delete unused variable.
3104 * blockframe.c (get_frame_block): Delete unused variable.
3105 * regcache.c (regcache_cpy): Delete unused variable.
3106 (regcache_cpy_no_passthrough): Delete unused variable.
3107 * charset.c (wchar_iterate): Delete unused variable.
3108 (find_charset_names): Delete unused variable.
3109 (_initialize_charset): Delete unused variable.
3110 * disasm.c (do_mixed_source_and_assembly):
3111 Delete unused variable.
3112 * source.c (set_default_source_symtab_and_line):
3113 Delete unused variable.
3114 (set_substitute_path_command): Delete unused variable.
3115 * value.c (preserve_values): Delete unused variable.
3116 (value_from_double): Delete unused variable.
3118 2010-05-05 Michael Snyder <msnyder@vmware.com>
3120 * psymtab.c (lookup_partial_symbol): Delete unused variable.
3121 (find_last_source_symtab_from_partial): Delete unused variable.
3122 * symfile.c (place_section): Delete unused variable.
3123 (default_symfile_offsets): Delete unused variable.
3124 (get_debug_link_info): Delete unused variable.
3125 (find_separate_debug_file_by_debuglink): Delete unused variable.
3126 (add_symbol_file_command): Delete unused variable.
3127 (symfile_find_segment_sections): Delete unused variable.
3128 * symmisc.c (free_symtab): Delete unused variable.
3129 (dump_symtab_1): Delete unused variable.
3130 * symtab.c (lookup_symbil_aux_quick): Delete unused variable.
3131 (find_pc_sect_symtab): Delete unused variable.
3132 (skip_prologue_using_lineinfo): Delete unused variable.
3133 (sources_info): Delete unused variable.
3134 (completion_list_add_name): Delete unused variable.
3135 (expand_line_sal): Delete unused variable.
3137 * breakpoint.c (validate_commands_for_breakpoint):
3138 Delete unused variables.
3139 (insert_catchpoint): Delete unused variable.
3140 (update_watchpoint): Delete unused variable.
3141 (insert_bp_location): Delete unused variable.
3142 (insert_breakpoint_locations): Delete unused variable.
3143 (remove_breakpoint_1): Delete unused variable.
3144 (software_breakpoint_inserted_here_p): Delete unused variable.
3145 (watchpoints_triggered): Delete unused variable.
3146 (bpstat_check_watchpoint): Delete unused variable.
3147 (bpstat_stop_status): Delete unused variable.
3148 (print_one_breakpoint_location): Delete unused variable.
3149 (allocate_bp_location): Delete unused variable.
3150 (create_breakpoint): Delete unused variable.
3151 (watch_command_1): Delete unused variable.
3152 (catch_exception_command_1): Delete unused variable.
3153 (catch_ada_exception_command): Delete unused variable.
3154 (delete_breakpoint): Delete unused variable.
3155 (breakpoint_re_set_one): Delete unused variable.
3156 (do_enable_breakpoint): Delete unused variable.
3158 2010-05-06 Pedro Alves <pedro@codesourcery.com>
3160 * amd64-tdep.c: Include disasm.h.
3161 (amd64_insn_length_fprintf, amd64_insn_length_init_dis)
3162 (amd64_insn_length): Moved to disasm.c and renamed.
3163 (fixup_riprel): Adjust.
3164 * disasm.c (do_ui_file_delete): New.
3165 (gdb_insn_length): New.
3166 (gdb_buffered_insn_length_fprintf)
3167 (gdb_buffered_insn_length_init_dis)
3168 (gdb_buffered_insn_length): New, moved from amd64-tdep.c, and
3170 * disasm.h (gdb_insn_length): Declare.
3171 (gdb_buffered_insn_length): Declare.
3173 2010-05-06 Pedro Alves <pedro@codesourcery.com>
3175 * remote.c (clear_threads_parsing_context): New.
3176 (remote_threads_info): Delete unused null_cleanup. Install a
3177 cleanup to clear the threads_parsing_context in case parsing
3180 2010-05-05 Michael Snyder <msnyder@vmware.com>
3182 * c-exp.y (parse_string_or_char): Delete unused variable.
3183 (c_lex): Delete unused variable.
3184 * cp-name-parser.y (cpname_lex): Delete unused variable.
3185 * ada-exp.y (find_primitive_type): Delete unused variable.
3186 (write_var_or_type): Delete unused variable.
3187 * jv-exp.y (java_parse): Delete unused variable.
3188 (push_expression_name): Delete unused variable.
3189 * p-exp.y (pascal_lex): Delete unused variable.
3191 2010-05-05 Pedro Alves <pedro@codesourcery.com>
3193 * remote.c (remote_threads_info): Really revert previous previous
3196 2010-05-05 Michael Snyder <msnyder@vmware.com>
3198 * elfread.c (elf_symtab_read): Delete unused variable.
3199 (find_separate_debug_file_by_buildid): Delete unused variables.
3200 (elf_symfile_read): Delete unused variable.
3202 * coffread.c (coff_symfile_read): Delete unused variables.
3204 * coff-pe-read.c (add_pe_exported_sym): Delete unused variable.
3205 (read_pe_exported_syms): Delete unused variable.
3207 * stabsread.c (define_symbol): Delete unused variable.
3209 * dwarf2read.c (read_type_comp_unit_head): Delete unused variable.
3210 (process_psymtab_comp_unit): Delete unused variable.
3211 (dwarf2_build_psymtabs_hard): Delete unused variable.
3212 (load_partial_comp_unit): Delete unused variable.
3213 (create_all_comp_units): Delete unused variable.
3214 (scan_partial_symbols): Delete unused variable.
3215 (add_partial_symbol): Delete unused variable.
3216 (add_partial_namespace): Delete unused variable.
3217 (add_partial_enumeration): Delete unused variable.
3218 (load_full_comp_unit): Delete unused variable.
3219 (process_full_comp_unit): Delete unused variable.
3220 (read_file_scope): Delete unused variable.
3221 (read_type_unit_scope): Delete unused variable.
3222 (process_structure_scope): Delete unused variable.
3223 (process_enumeration_scope): Delete unused variable.
3224 (read_tag_ptr_to_member_type): Delete unused variable.
3225 (read_typedef): Delete unused variable.
3226 (read_partial_die): Delete unused variable.
3227 (decode_locdesc): Delete unused variable.
3228 (zeroed_partial_die): Delete unused global variable.
3230 * tui/tui-interp.c (_initialize_tui_interp):
3231 Delete unused variable.
3232 * tui/tui-regs.c tui_display_registers_from):
3233 Delete unused variable.
3234 (tui_check_register_values): Delete unused variable.
3235 (tui_register_format): Delete unused variable.
3236 * tui/tui-win.c (_initialize_tui_win): Delete unused variable.
3237 * tui/tui-windata.c (tui_display_data_from_line):
3238 Delete unused variables.
3239 (tui_vertical_data_scroll): Delete unused variables.
3241 2010-05-05 Michael Snyder <msnyder@vmware.com>
3243 * remote.c (remote_threads_info): Revert questionable part of
3244 the previous change.
3246 2010-05-05 Michael Snyder <msnyder@vmware.com>
3248 * mi/mi-out.c (mi_table_begin): Delete unused variable.
3249 * mi/mi-cmd-var.c (print_varobj): Delete unused variable.
3250 (mi_cmd_var_list_children): Delete unused variable.
3251 (varobj_update_one): Delete unused variable.
3252 * mi/mi-cmd-break.c (mi_cmd_break_insert): Delete unused variables.
3253 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals):
3254 Delete unused variable.
3255 (mi_cmd_stack_list_variables): Delete unused variable.
3256 (list_args_or_locals): Delete unused variable.
3257 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file):
3258 Delete unused variables.
3259 (mi_cmd_file_list_exec_source_files): Delete unused variable.
3260 * mi/mi-cmd-target.c (mi_cmd_target_file_delete):
3261 Delete unused variable.
3262 * mi/mi-interp.c (mi_interpreter_exec): Delete unused variable.
3263 (mi_cmd_interpreter_exec): Delete unused variable.
3264 (mi_on_normal_stop): Delete unused variable.
3265 * mi/mi-main.c (run_one_inferior): Delete unused variable.
3266 (print_one_inferior): Delete unused variables.
3267 (mi_execute_command): Delete unused variable.
3268 (mi_cmd_execute): Delete unused variable.
3269 (timestamp): Delete unused variable.
3271 * cli/cli-dump.c (dump_memory_to_file): Delete unused variable.
3272 (restore_binary_file): Delete unused variable.
3273 * cli/cli-decode.c (deprecated_cmd_warning): Delete unused variables.
3274 * cli/cli-script.c (define_command): Delete unused variables.
3275 (recurse_read_control_structure): Delete unused variable.
3276 (script_from_file): Delete unused variable.
3277 * cli/cli-cmds.c (complete_command): Delete unused variable.
3278 (disassemble_command): Delete unused variable.
3280 * ax-gdb.c (gen_struct_elt_for_reference): Delete unused variables.
3281 * tracepoint.c (delete_trace_variable_command):
3282 Delete unused variables.
3283 (encode_actions_1): Delete unused variables.
3284 (start_tracing): Delete unused variable.
3285 (trace_status_mi): Delete unused variable.
3286 (tfind_1): Delete unused variable.
3287 (trace_find_pc_command): Delete unused variable.
3288 (trace_find_line_command): Delete unused variables.
3289 (trace_find_range_command): Delete unused variables.
3290 (trace_find_outside_command): Delete unused variables.
3291 (parse_tracepoint_definition): Delete unused variables.
3292 (tfile_fetch_registers): Delete unused variable.
3294 * dcache.c (dcache_init): Delete unused variable.
3295 (dcache_info): Delete unused variable.
3297 * remote.c (remote_threads_info): Delete unused variable.
3298 (process_stop_reply) :Delete unused variable.
3299 (remote_get_trace_status): Delete unused variables.
3301 * linux-thread-db.c (add_thread_db_info): Delete unused variable.
3302 (thread_from_lwp): Delete unused variable.
3303 (enable_thread_event_reporting): Delete unused variable.
3304 (check_for_thread_db): Delete unused variables.
3305 (thread_db_find_new_threads_2): Delete unused variable.
3307 * linux-fork.c (info_checkpoints_command): Delete unused variables.
3308 (checkpoint_command): Delete unused variable.
3309 (linux_fork_context): Delete unused variables.
3311 * linux-nat.c (linux_parent_pid): Delete unused global variable.
3312 (linux_tracefork_child): Delete unused variable.
3313 (linux_child_follow_fork): Delete unused variable.
3314 (linux_nat_detach): Delete unused variable.
3315 (linux_handle_extended_wait): Delete unused variable.
3316 (linux_nat_has_pending_sigint): Delete unused variable.
3317 (linux_nat_find_memory_regions): Delete unused variable.
3318 (linux_nat_make_corefile_notes): Delete unused variables.
3319 (linux_nat_info_proc_cmd): Delete unused variable.
3320 (linux_proc_pending_signals): Delete unused variable.
3321 (linux_nat_stop_lwp): Delete unused variables.
3322 (_initialize_linux_nat): Delete unused variable.
3324 * ser-pipe.c (pipe_ops): Delete unused global variable.
3326 * linux-record.c (record_linux_system_call):
3327 Delete unused variables.
3329 * corelow.c (core_xfer_partial): Delete unused variables.
3331 * solib-svr4.c (find_program_interpreter): Delete unused variable.
3332 (svr4_solib_create_inferior_hook): Add ifdef around
3333 conditionally-used variable declarations.
3335 * solib.c (solib_find): Delete unused variable.
3336 (free_so_symbols): Delete unused variable.
3337 (info_sharedlibrary_command): Delete unused variable.
3338 (reload_shared_libraries_1): Delete unused variable.
3339 (_initialize_solib): Delete unused variable.
3341 * i386-tdep.c (i386_supply_xstateregset) Delete unused variable.
3342 (i386_collect_xstateregset): Delete unused variable.
3343 * i387-tdep.c (i387_print_float_info): Delete unused variable.
3345 * features/i386/i386-mmx.c (initialize_tdesc_i386_mmx):
3346 Delete unused variable 'type'.
3348 2010-05-05 Joel Brobecker <brobecker@adacore.com>
3350 * gdbtypes.h (MAX_OF_TYPE, MIN_OF_TYPE): Delete macros. *
3351 ada-lang.c: Remove comment mentioning these macros.
3352 * m2-exp.y: Delete commented out code.
3354 2010-05-05 Joel Brobecker <brobecker@adacore.com>
3356 * sparc-tdep.c (sparc_structure_or_union_p): Return non-zero
3358 * sparc64-tdep.c (sparc64_structure_or_union_p): Likewise.
3360 2010-05-04 Pierre Muller <muller@ics.u-strasbg.fr>
3362 ARI fix: Remove ATTRIBUTE_UNUSED throughout.
3363 * arm-linux-tdep.c (arm_linux_cleanup_svc): Remove
3365 (cleanup_kernel_helper_return): Likewise.
3366 * arm-tdep.c (copy_unmodified): Likewise.
3367 (copy_preload): Likewise.
3368 (copy_copro_load_store): Likewise.
3369 (cleanup_branch): Likewise.
3370 (copy_b_bl_blx): Likewise.
3371 (copy_bx_blx_reg): Likewise.
3372 (copy_alu_imm): Likewise.
3373 (copy_alu_reg): Likewise.
3374 (copy_alu_shifted_reg): Likewise.
3375 (cleanup_load): Likewise.
3376 (cleanup_store): Likewise.
3377 (cleanup_block_load_pc): Likewise.
3378 (cleanup_svc): Likewise.
3379 (copy_undef): Likewise.
3380 (copy_unpred): Likewise.
3381 * remote.c (register_remote_support_xml): Likewise.
3383 2010-05-05 Hui Zhu <teawater@gmail.com>
3385 * gdbarch.h (gdbarch_has_dos_based_file_system): Update comment.
3387 2010-05-04 Mark Kettenis <kettenis@gnu.org>
3389 * remote.c (register_remote_support_xml)
3390 (remote_query_supported_append, remote_query_supported): Add cast
3391 to NULL used as sentinel.
3392 * tracepoint.c (tvariables_info_1): Likewise.
3393 * utils.c (add_internal_problem_command): Likewise.
3395 2010-05-04 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
3397 * dwarf2loc.c (read_pieced_value, write_pieced_value,
3398 dwarf2_evaluate_loc_desc): Handle not being able to access DWARF
3399 registers gracefully.
3401 2010-05-04 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
3403 * exec.c (print_section_info): Display entry point without arch
3406 2010-05-04 Pierre Muller <muller@ics.u-strasbg.fr>
3409 * printcmd.c (x_command): Only dereference once implicitly for
3412 2010-05-03 Doug Evans <dje@google.com>
3414 * event-loop.c (gdb_timer): Delete unused global.
3415 (create_timer): Update.
3417 2010-05-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3419 * cp-namespace.c (cp_lookup_symbol_imports): Support ALIAS for the
3420 CURRENT->DECLARATION case.
3421 * cp-support.h (struct using_direct): Provide extended comment.
3423 2010-05-03 Mark Kettenis <kettenis@gnu.org>
3425 * hppaobsd-tdep.c (HPPAOBSD_SIZEOF_GREGS): Renamed from
3426 HPPABSD_SIZEOF_GREGS.
3427 (HPPAOBSD_SIZEOF_FPREGS): New define.
3428 (hppaobsd_supply_gregset): Renamed from hppabsd_supply_gregset.
3429 (hppaobsd_supply_fpregset): New function.
3430 (hppaobsd_gregset): Renamed from hppabsd_gregset.
3431 (hppaobsd_fpregset): New variable.
3432 (hppaobsd_regset_from_core_section): Handle floating-point registers.
3433 (_initialize_hppabsd_tdep): Remove spurious blank line.
3435 2010-05-03 Pierre Muller <muller@ics.u-strasbg.fr>
3438 * p-valprint.c (pascal_value_print): Always dereference a value with
3439 type code TYPE_CODE_REF.
3441 2010-05-03 Pedro Alves <pedro@codesourcery.com>
3443 * remote.c (remote_notice_signals): New.
3444 (remote_start_remote): In non-stop mode, update the remote end on
3445 which signals it can silently pass.
3446 (init_remote_ops): Install remote_notice_signals.
3448 2010-05-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3450 * cli/cli-cmds.h (error_no_arg): Remove. Move the comment ...
3451 * command.h (error_no_arg): ... here. Remove NORETURN, change
3452 ATTR_NORETURN to ATTRIBUTE_NORETURN.
3453 * defs.h (NORETURN, ATTR_NORETURN): Remove.
3454 (perror_with_name, verror, error, error_stream, vfatal, fatal)
3455 (internal_verror, internal_error, nomem): Remove NORETURN, change
3456 ATTR_NORETURN to ATTRIBUTE_NORETURN.
3457 * exceptions.c (throw_exception, deprecated_throw_reason, throw_verror)
3458 (throw_vfatal, throw_error): Remove NORETURN.
3459 (throw_it): Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN.
3460 * exceptions.h (throw_exception, throw_verror, throw_vfatal)
3461 (throw_error, deprecated_throw_reason): Remove NORETURN, change
3462 ATTR_NORETURN to ATTRIBUTE_NORETURN.
3463 * linespec.c (cplusplus_error): Remove NORETURN, change ATTR_NORETURN
3464 to ATTRIBUTE_NORETURN for prototype, for the definition only remove
3466 * remote-mips.c (mips_error): Change NORETURN to ATTRIBUTE_NORETURN.
3467 * remote-sim.c (gdb_os_error): Change ATTR_NORETURN to
3469 * target.c (tcomplain): Likewise.
3470 * target.h (noprocess): Remove NORETURN, change ATTR_NORETURN to
3472 * utils.c (verror, error, vfatal, fatal, error_stream, internal_verror)
3473 (internal_error, perror_with_name, nomem): Remove NORETURN.
3474 * xml-support.h (gdb_xml_error): Change ATTR_NORETURN to
3477 2010-05-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3479 * ada-lang.c (lim_warning): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
3480 * amd64-tdep.c (amd64_insn_length_fprintf): Likewise.
3481 * cli-out.c (cli_field_fmt): New ATTRIBUTE_PRINTF.
3482 (cli_message, out_field_fmt): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
3483 * complaints.c (find_complaint): New ATTRIBUTE_PRINTF.
3484 (vcomplaint): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
3485 * complaints.h (complaint, internal_complaint): Likewise.
3486 * defs.h: Change ATTR_FORMAT to ATTRIBUTE_PRINTF in the top comment.
3487 (ATTR_FORMAT): Remove.
3488 (query, nquery, yquery, vprintf_filtered, vfprintf_filtered)
3489 (fprintf_filtered, fprintfi_filtered, printf_filtered, printfi_filtered)
3490 (vprintf_unfiltered, vfprintf_unfiltered, fprintf_unfiltered)
3491 (printf_unfiltered, xasprintf, xvasprintf, xstrprintf, xstrvprintf)
3492 (xsnprintf, verror, error, vfatal, fatal, internal_verror)
3493 (internal_error, internal_vwarning, internal_warning, warning)
3494 (vwarning): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
3495 * disasm.c (fprintf_disasm): Likewise.
3496 * exceptions.c (throw_it): Likewise.
3497 * exceptions.h (exception_fprintf, throw_verror, throw_vfatal)
3498 (throw_error): Likewise.
3499 * language.h (type_error, range_error): Likewise.
3500 * linespec.c (cplusplus_error): Likewise.
3501 * mi/mi-interp.c (mi_interp_query_hook): Likewise.
3502 * mi/mi-out.c (mi_field_fmt, mi_message): Likewise.
3503 * monitor.c (monitor_debug): Likewise.
3504 * parser-defs.h (parser_fprintf): Likewise.
3505 * serial.h (serial_printf): Likewise.
3506 * tui/tui-hooks.c (tui_query_hook): Likewise.
3507 * ui-out.c (default_field_fmt, default_message, uo_field_fmt)
3508 (uo_message): Likewise.
3509 * ui-out.h (ui_out_field_fmt, ui_out_message): Likewise.
3510 * utils.c (vfprintf_maybe_filtered, internal_vproblem, defaulted_query):
3512 * xml-support.h (gdb_xml_debug, gdb_xml_error): Likewise.
3514 2010-05-02 Pedro Alves <pedro@codesourcery.com>
3516 * cli-out.c (cli_table_begin, cli_table_body, cli_table_end)
3517 (cli_table_header, cli_begin, cli_end, cli_field_int)
3518 (cli_field_skip, cli_field_string, cli_field_fmt, cli_spaces)
3519 (cli_text, cli_message, cli_wrap_hint, cli_flush, cli_redirect):
3520 Delete forward declarations.
3521 (cli_ui_out_impl): Move below the callbacks.
3522 (_initialize_cli_out): Delete.
3524 2010-05-02 Pedro Alves <pedro@codesourcery.com>
3526 * README: Use consistent `GDB' and `GDBserver' spellings.
3528 2010-05-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3530 * cli/cli-dump.h (parse_and_eval_with_error): Remove the declaration.
3532 2010-05-01 Pedro Alves <pedro@codesourcery.com>
3534 * infrun.c (prepare_for_detach): In non-stop, context switch to
3535 the thread that got the event before handling the event.
3537 2010-04-30 Tom Tromey <tromey@redhat.com>
3539 * symtab.c (symbol_set_names): Fix typo.
3541 2010-04-30 Pierre Muller <muller@ics.u-strasbg.fr>
3543 * python/py-param.c (parm_constants): Avoid ARI warning
3544 by adding ARI comment.
3545 (parmpy_init): Likewise.
3547 2010-04-30 Pierre Muller <muller@ics.u-strasbg.fr>
3549 * windows-tdep.c (windows_get_tlb_type): Remember last GDBARCH
3550 and created type for re-use.
3552 2010-04-30 Pierre Muller <muller@ics.u-strasbg.fr>
3554 * NEWS: Mention gdbserver support for x86_64 Windows 64-bit.
3556 2010-04-29 Doug Evans <dje@google.com>
3558 * ser-base.h (reschedule): Delete prototype.
3559 * ser-base.c (reschedule): Make static.
3561 2010-04-29 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
3563 * arm-linux-tdep.c (ARM_LINUX_JB_PC): Remove.
3564 (ARM_LINUX_JB_PC_FPA): Add, offset of PC in longjmp buffer for FPA.
3565 (ARM_LINUX_JB_PC_EABI): Add, offset of PC in longjmp buffer for
3567 (arm_linux_init_abi): Set up JB_PC field dependent on FP model in
3570 2010-04-29 Pedro Alves <pedro@codesourcery.com>
3574 * regcache.c (registers_changed): Rename to ...
3575 (registers_changed_ptid): ... this, and only delete register cache
3576 entries matching the ptid filter argument.
3577 (registers_changed): Reimplement on top of registers_changed_ptid.
3578 * regcache.h (registers_changed_ptid): Declare.
3579 * target.c (target_resume): Flush register caches.
3581 2010-04-29 Phil Muldoon <pmuldoon@redhat.com>
3582 Tom Tromey <tromey@redhat.com>
3583 Thiago Jung Bauermann <bauerman@br.ibm.com>
3585 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-parameter.
3586 (SUBDIR_PYTHON_SRCS): Likewise.
3587 (py-parameter.o): New rule.
3588 * python/py-parameter.c: New file.
3589 * python/python-internal.h (gdbpy_initialize_parameter)
3590 (gdbpy_parameter, gdbpy_parameter_value)
3591 (gdbpy_parse_command_name): Declare.
3592 * python/py-cmd.c (parse_command_name): Rename to
3593 gdbpy_parse_command_name.
3594 (gdbpy_parse_command_name): Accept a starting list parameter and
3596 (cmdpy_init): Use gdbpy_parse_command_name.
3597 * python/python.c (parameter_to_python): Rename to
3598 gdbpy_parameter_to_python. Accept enum var_types and value.
3599 (gdbpy_parameter): Use gdbpy_parameter_value.
3600 (_initialize_python): Call gdbpy_initialize_parameters.
3602 2010-04-29 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
3604 * MAINTAINERS: Add myself for write after approval privileges.
3606 2010-04-29 Mihail Zenkov <mihail.zenkov@gmail.com>
3609 * Makefile.in (SFILES): Add d-lang.c d-valprint.c.
3610 (COMMON_OBS): Add d-lang.o d-valprint.o.
3611 (HFILES_NO_SRCDIR): Add d-lang.h.
3612 * NEWS: Mention D language support.
3613 * c-lang.c (c_emit_char, exp_descriptor_c): Make public.
3614 * c-lang.h (c_emit_char, exp_descriptor_c): Add declaration.
3615 * d-lang.c: New file.
3616 * d-lang.h: New file.
3617 * d-valprint.c: New file.
3618 * defs.h (enum language): Add language_d.
3619 * dwarf2read.c (set_cu_language): Add DW_LANG_D.
3620 * language.c (binop_result_type, integral_type, character_type)
3621 (string_type, boolean_type, structured_type): Add language_d.
3622 * symfile.c (init_filename_language_table): Add language_d.
3623 * symtab.c: Include d-lang.h.
3624 (symbol_init_language_specific, symbol_find_demangled_name)
3625 (symbol_natural_name, lookup_symbol_in_language)
3626 (symbol_demangled_name, symbol_matches_domain): Add language_d.
3628 2010-04-27 Joel Brobecker <brobecker@adacore.com>
3630 * solib-svr4.c (solib_svr4_r_map): Expand function description.
3632 2010-04-27 Joel Brobecker <brobecker@adacore.com>
3634 * symfile.c (init_filename_language_table): Register .dg files
3637 2010-04-27 Joel Brobecker <brobecker@adacore.com>
3639 * gdbtypes.h (struct main_type): Expand comment about target_type
3642 2010-04-27 Pedro Alves <pedro@codesourcery.com>
3643 Tristan Gingold <gingold@adacore.com>
3645 * symfile.c (reread_symbols): Also search for file in libraries.
3648 2010-04-27 Joel Brobecker <brobecker@adacore.com>
3650 * configure.tgt: Treat x86-lynxos targets as x86 bareboard targets
3651 in terms of configuration.
3653 2010-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
3655 * objfiles.c: Include solist.h.
3656 (free_all_objfiles): New variable so. Check stale solist objfiles.
3657 * symfile.c (symbol_file_clear): Swap the order of free_all_objfiles
3658 and no_shared_libraries.
3660 2010-04-27 Joel Brobecker <brobecker@adacore.com>
3663 * python/py-auto-load.c (source_section_scripts): Remove trailing
3664 new-line in i18n string.
3666 2010-04-26 Doug Evans <dje@google.com>
3668 * serial.c (serial_write): Handle serial_debug_p akin to serial_read.
3670 2010-04-26 Tom Tromey <tromey@redhat.com>
3672 * cli/cli-decode.c (complete_on_cmdlist): Make two passes over the
3675 2010-04-26 Pierre Muller <muller@ics.u-strasbg.fr>
3677 Removal of config/i386/nm-i386sol2.h native configuration file.
3678 * config/i386/nm-i386sol2.h: Remove file.
3679 * config/i386/i386sol2.mh: Remove NAT_FILE definition.
3680 * config/i386/sol2-64.mh: Idem.
3681 * config/djgpp/fnchange.lst: Remove reference to that file.
3682 * Makefile.in (HFILES_NO_SRCDIR): Idem.
3684 2010-04-26 Pierre Muller <muller@ics.u-strasbg.fr>
3686 PR breakpoints/11531.
3687 * config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS): Remove
3688 macro definition and related comment.
3689 * infrun.c (CANNOT_STEP_HW_WATCHPOINTS): Remove macro.
3690 (resume): Remove code and comment related to this macro.
3692 2010-04-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3694 * cp-namespace.c (cp_lookup_symbol_in_namespace): Fix alloca size.
3697 2010-04-24 Pedro Alves <pedro@codesourcery.com>
3699 * defs.h: Adjust comment.
3700 * filesystem.h, filesystem.c: New files.
3701 * Makefile.in (SFILES): Add filesystem.c.
3702 (COMMON_OBS): Add filesystem.o.
3703 * solib.c (solib_find): Handle DOS-based filesystems. Handle
3704 different target and host path flavours.
3705 * arm-symbian-tdep.c (arm_symbian_init_abi): Set
3706 has_dos_based_file_system on the gdbarch.
3707 * arm-wince-tdep.c (arm_wince_init_abi): Ditto.
3708 * i386-cygwin-tdep.c (i386_cygwin_init_abi): Ditto.
3709 * i386-tdep.c (i386_go32_init_abi): Ditto.
3710 * gdbarch.sh (has_dos_based_file_system): New.
3711 * gdbarch.h, gdbarch.c: Regenerate.
3712 * NEWS: Mention improved support for remote targets with DOS-based
3713 filesystems. Mention new `set/show target-file-system-kind'
3716 2010-04-23 Stan Shebs <stan@codesourcery.com>
3718 * ax.h (struct agent_expr): Merge in agent_reqs fields, add some
3720 (struct agent_reqs): Remove.
3721 (ax_reg_mask): Declare.
3722 * ax-general.c (new_agent_expr): Add gdbarch argument, set new fields.
3723 (free_agent_expr): Free reg_mask.
3724 (ax_print): Add scope and register mask info.
3725 (ax_reqs): Remove agent_reqs argument, use agent expression
3726 fields, and move part of register mask computation to...
3727 (ax_reg_mask): New function.
3728 * ax-gdb.c (gen_trace_static_fields): Call it.
3729 (gen_traced_pop): Ditto.
3730 (is_nontrivial_conversion): Add dummy gdbarch to new_agent_expr.
3731 (gen_trace_for_var): Pass gdbarch to new_agent_expr.
3732 (gen_trace_for_expr): Ditto, and clear optimized_out flag.
3733 (gen_eval_for_expr): Ditto, and require an rvalue.
3734 (agent_command): Call ax_reqs.
3735 (agent_eval_command): Ditto.
3736 * tracepoint.c (report_agent_reqs_errors): Use agent expression fields.
3737 (validate_action_line): Ditto.
3738 (collect_symbol): Ditto.
3739 (encode_actions_1): Ditto.
3741 2010-04-23 Daniel Jacobowitz <dan@codesourcery.com>
3742 Paul Pluzhnikov <ppluzhnikov@google.com>
3743 Jan Kratochvil <jan.kratochvil@redhat.com>
3745 Fix deadlock on looped list of loaded shared objects.
3746 * solib-svr4.c (LM_PREV): New function.
3747 (IGNORE_FIRST_LINK_MAP_ENTRY): Use it.
3748 (svr4_current_sos): Check for correct l_prev. New variables prev_lm
3749 and next_lm. Clear prev_lm for solib_svr4_r_ldsomap.
3750 * config/djgpp/fnchange.lst: Add translation for solib-corrupted.exp.
3752 2010-04-23 Doug Evans <dje@google.com>
3754 * configure.ac (CONFIG_SRCS): Add py-auto-load.o even if not using
3756 * configure: Regenerate.
3757 * main.c: #include "python/python.h".
3758 (captured_main): Defer loading auto-loaded scripts until after
3759 local_gdbinit has been sourced.
3760 * python/py-auto-load.c (gdbpy_global_auto_load): New global.
3761 (load_auto_scripts_for_objfile): New function.
3762 (auto_load_new_objfile): Call it.
3763 * python/python.h (gdbpy_global_auto_load): Declare.
3764 (load_auto_scripts_for_objfile): Declare.
3766 Add support for auto-loading scripts from .debug_gdb_scripts section.
3767 * NEWS: Add entry for .debug_gdb_scripts.
3768 * Makefile.in SUBDIR_PYTHON_OBS): Add py-auto-load.o.
3769 (SUBDIR_PYTHON_SRCS): Add py-auto-load.c.
3770 (py-auto-load.o): New rule.
3771 * cli/cli-cmds.c (find_and_open_script): Make externally visible.
3772 * cli/cli-cmds.h (find_and_open_script): Update prototype.
3773 * python/py-auto-load.c: New file.
3774 * python/python-internal.h: #include <stdio.h>.
3775 (set_python_list, show_python_list): Declare.
3776 (gdbpy_initialize_auto_load): Declare.
3777 (source_python_script_for_objfile): Declare.
3778 * python/python.c: Remove #include of observer.h.
3779 (gdbpy_auto_load): Moved to py-auto-load.c.
3780 (GDBPY_AUTO_FILENAME): Ditto.
3781 (gdbpy_new_objfile): Delete.
3782 (source_python_script_for_objfile): New function.
3783 (set_python_list, show_python_list): Make externally visible.
3784 (_initialize_python): Move "auto-load" command to py-auto-load.c
3785 and observer_attach_new_objfile to py-auto-load.c.
3787 2010-04-23 Jerome Guitton <guitton@adacore.com>
3789 * alpha-tdep.c (INSN_OPCODE, MEM_RA, MEM_RB, MEM_DISP, BR_RA)
3790 (OPR_FUNCTION, OPR_HAS_IMMEDIATE, OPR_RA, OPR_RC, OPR_LIT): New macros.
3791 (lda_opcode, stq_opcode, bne_opcode, subq_opcode, subq_function):
3793 (alpha_heuristic_analyze_probing_loop): New function.
3794 (alpha_heuristic_frame_unwind_cache): In the prologue analysis, detect
3795 and handle cases when a stack probe loop is generated.
3796 * alpha-mdebug-tdep.c (alpha_mdebug_frameless): New function.
3797 (alpha_mdebug_max_frame_size_exceeded): New function.
3798 (alpha_mdebug_after_prologue): Use alpha_mdebug_frameless.
3799 (alpha_mdebug_frame_sniffer, alpha_mdebug_frame_base_sniffer):
3800 Return 0 when the maximum debuggable frame size has been exceeded.
3802 2010-04-23 Joel Brobecker <brobecker@adacore.com>
3805 * ppc-linux-nat.c (booke_cmp_hw_point): Do not mark inline.
3807 2010-04-20 Chris Moller <cmoller@redhat.com>
3811 * symtab.c (rbreak_command): Added code to include a filename
3812 specification in the rbreak argument.
3813 * NEWS: Added a brief description of filename-qualified rbreak.
3815 2010-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
3817 Fix crashes on dangling display expressions.
3818 * ada-lang.c (ada_operator_check): New function.
3819 (ada_exp_descriptor): Fill-in the field operator_check.
3820 * c-lang.c (exp_descriptor_c): Fill-in the field operator_check.
3821 * jv-lang.c (exp_descriptor_java): Likewise.
3822 * m2-lang.c (exp_descriptor_modula2): Likewise.
3823 * scm-lang.c (exp_descriptor_scm): Likewise.
3824 * parse.c (exp_descriptor_standard): Likewise.
3825 (operator_check_standard): New function.
3826 (exp_iterate, exp_uses_objfile_iter, exp_uses_objfile): New functions.
3827 * parser-defs.h (struct exp_descriptor): New field operator_check.
3828 (operator_check_standard, exp_uses_objfile): New declarations.
3829 * printcmd.c: Remove the inclusion of solib.h.
3830 (display_uses_solib_p): Remove the function.
3831 (clear_dangling_display_expressions): Call lookup_objfile_from_block
3832 and exp_uses_objfile instead of display_uses_solib_p.
3833 * solist.h (struct so_list) <objfile>: New comment.
3834 * symtab.c (lookup_objfile_from_block): Remove the static qualifier.
3835 * symtab.h (lookup_objfile_from_block): New declaration.
3836 (struct general_symbol_info) <obj_section>: Extend the comment.
3838 2010-04-22 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
3839 Thiago Jung Bauermann <bauerman@br.ibm.com>
3841 * ppc-linux-nat.c (PTRACE_GET_DEBUGREG): Update comment.
3842 (PPC_PTRACE_GETWDBGINFO, PPC_PTRACE_SETHWDEBUG, PPC_PTRACE_DELHWDEBUG,
3843 ppc_debug_info, PPC_DEBUG_FEATURE_INSN_BP_RANGE,
3844 PPC_DEBUG_FEATURE_INSN_BP_MASK, PPC_DEBUG_FEATURE_DATA_BP_RANGE,
3845 PPC_DEBUG_FEATURE_DATA_BP_MASK, ppc_hw_breakpoint,
3846 PPC_BREAKPOINT_TRIGGER_EXECUTE, PPC_BREAKPOINT_TRIGGER READ,
3847 PPC_BREAKPOINT_TRIGGER_WRITE, PPC_BREAKPOINT_TRIGGER_RW,
3848 PPC_BREAKPOINT_MODE_EXACT PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE,
3849 PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE, PPC_BREAKPOINT_MODE_MASK,
3850 PPC_BREAKPOINT_CONDITION_NONE, PPC_BREAKPOINT_CONDITION_AND,
3851 PPC_BREAKPOINT_CONDITION_EXACT, PPC_BREAKPOINT_CONDITION_OR,
3852 PPC_BREAKPOINT_CONDITION_AND_OR, PPC_BREAKPOINT_CONDITION_BE_ALL,
3853 PPC_BREAKPOINT_CONDITION_BE_SHIFT, PPC_BREAKPOINT_CONDITION_BE):
3854 Define, in case <ptrace.h> doesn't provide it.
3855 (booke_debug_info): New variable.
3856 (max_slots_number): Ditto.
3857 (hw_break_tuple): New struct.
3858 (thread_points): Ditto.
3859 (ppc_threads): New variable.
3860 (PPC_DEBUG_CURRENT_VERSION): New define.
3861 (have_ptrace_new_debug_booke): New function.
3862 (ppc_linux_check_watch_resources): Renamed to ...
3863 (ppc_linux_can_use_hw_breakpoint): ... this. Handle BookE processors.
3864 (ppc_linux_region_ok_for_hw_watchpoint): Handle BookE processors.
3865 (booke_cmp_hw_point): New function.
3866 (booke_find_thread_points_by_tid): Ditto.
3867 (booke_insert_point): Ditto.
3868 (booke_remove_point): Ditto.
3869 (ppc_linux_insert_hw_breakpoint): Ditto.
3870 (ppc_linux_remove_hw_breakpoint): Ditto.
3871 (get_trigger_type): Ditto.
3872 (ppc_linux_insert_watchpoint): Handle BookE processors.
3873 (ppc_linux_remove_watchpoint): Ditto.
3874 (ppc_linux_new_thread): Ditto.
3875 (ppc_linux_thread_exit): New function..
3876 (ppc_linux_stopped_data_address): Handle BookE processors.
3877 (ppc_linux_watchpoint_addr_within_range): Ditto.
3878 (_initialize_ppc_linux_nat): Initialize to_insert_hw_breakpoint and
3879 to_remove_hw_breakpoint fields of the target operations struct.
3880 Add observe for the thread_exit event.
3882 2010-04-22 H.J. Lu <hongjiu.lu@intel.com>
3884 * i386-linux-nat.c (regmap): Removed.
3885 (fetch_register): Replace regmap with
3886 i386_linux_gregset_reg_offset.
3887 (store_register): Likewise.
3888 (supply_gregset): Likewise.
3889 (fill_gregset): Likewise.
3891 * i386-linux-tdep.c (i386_linux_gregset_reg_offset): Make it
3894 * i386-linux-tdep.h (i386_linux_gregset_reg_offset): New.
3896 2010-04-22 Chris Moller <cmoller@redhat.com>
3898 * cp-valprint.c (cp_print_value_fields): Replaced obstack_base()
3899 method of popping recursion-detection stack with a method based on
3900 obstack_object_size(). (Similar to the PR9167 patch below, but for
3901 the static array obstack rather than the static member obstack.)
3903 2010-04-22 H.J. Lu <hongjiu.lu@intel.com>
3905 * amd64-linux-nat.c (amd64_linux_gregset64_reg_offset): Removed.
3906 (_initialize_amd64_linux_nat): Replace
3907 amd64_linux_gregset64_reg_offset with
3908 amd64_linux_gregset_reg_offset.
3910 * amd64-linux-tdep.c (amd64_linux_gregset_reg_offset): Make it
3913 * amd64-tdep.h (amd64_linux_gregset_reg_offset): New.
3915 2010-04-22 Pierre Muller <muller@ics.u-strasbg.fr>
3918 * stabsread.c (set_length_in_type_chain): New function.
3919 (read_struct_type): Call set_length_in_type_chain function.
3920 (read_enum_type): Idem.
3922 2010-04-21 Stan Shebs <stan@codesourcery.com>
3923 Nathan Sidwell <nathan@codesourcery.com>
3925 * tracepoint.c (trace_save): Open in binary mode.
3927 2010-04-22 Pierre Muller <muller@ics.u-strasbg.fr>
3929 * gdbtypes.h (builtin_type): Add builtin_char16 and builtin_char32
3931 * gdbtypes.c (gdbtypes_post_init): Set builtin_char16 and
3932 builtin_char32 fields.
3933 * printcmd.c (decode_format): Set char size to '\0'
3934 for strings unless explicit size is given.
3935 (print_formatted): Correct calculation of NEXT_ADDRESS
3936 for 16 or 32 bit strings.
3937 (do_examine): Do not force byte size for strings.
3938 Use builtin_char16 and builtin_char32 types to display
3939 16 or 32 bit-wide strings.
3940 (x_command): Set LAST_SIZE to 'b' for string type.
3942 2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
3945 * amd64-linux-tdep.c (amd64_linux_core_read_description): Check
3948 * i386-linux-tdep.c (i386_linux_core_read_xcr0): Return 0 if
3949 there is no .reg-xstate section.
3950 (i386_linux_core_read_description): Check XCR0 first.
3952 2010-04-21 Mike Frysinger <vapier@gentoo.org>
3954 * gdb/sparc-tdep.c (sparc32_store_return_value): Add gdb_assert ()
3957 2010-04-21 Chris Moller <cmoller@redhat.com>
3960 * cp-valprint.c (cp_print_value_fields): Replaced obstack_base()
3961 method of popping recursion-detection stack with a method based on
3962 obstack_object_size().
3964 2010-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
3967 * p-valprint.c (pascal_val_print): Fix default printing of integer
3970 2010-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
3972 Fix compilation warning on gcc-4.1.2.
3973 * rs6000-aix-tdep.c (rs6000_convert_from_func_ptr_addr): Initialize
3974 local variable`pc' to zero.
3976 2010-04-20 Joel Brobecker <brobecker@adacore.com>
3978 Implement thread support with core files on alpha-tru64.
3979 * dec-thread.c (dec_thread_find_new_threads): New function,
3980 extracted from resync_thread_list.
3981 (resync_thread_list): Add OPS parameter. Replace extracted-out
3982 code by call to dec_thread_find_new_threads.
3983 (dec_thread_wait): Update call to resync_thread_list.
3984 (init_dec_thread_ops): Set dec_thread_ops.to_find_new_threads.
3986 2010-04-20 Joel Brobecker <brobecker@adacore.com>
3988 * ada-lang.c (value_pointer): New function.
3989 (make_array_descriptor): Call value_pointer to convert addresses to
3992 2010-04-20 Joel Brobecker <brobecker@adacore.com>
3994 * rs6000-aix-tdep.c: #include exceptions.h.
3995 (rs6000_convert_from_func_ptr_addr): If an exception is thrown
3996 while reading the memory at ADDR, then ADDR cannot be a function
3999 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4001 * ada-typeprint.c (ada_print_typedef): New function.
4002 * ada-lang.h (ada_print_typedef): Add declaration.
4003 * ada-lang.c (ada_language_defn): set la_print_typdef field
4004 to ada_print_typedef.
4006 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4008 * procfs.c (procfs_address_to_host_pointer): Only define when used.
4010 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4012 * procfs.c (iterate_over_mappings_cb_ftype): New typedef.
4013 (iterate_over_mappings): Adjust function profile. Add declaration.
4014 (insert_dbx_link_bpt_in_region, info_mappings_callback):
4017 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4019 * procfs.c (solib_mappings_callback): Move function up to avoid
4022 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4024 * procfs.c (find_signalled_thread, find_stop_signal): Move
4025 these functions down to define them only when used.
4027 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4029 * valprint.c (common_val_print): Fix the value before extracting
4031 * ada-lang.c (ada_to_fixed_value): Make this function extern.
4032 * ada-lang.h (ada_to_fixed_value): New function declaration.
4033 * ada-valprint.c (ada_value_print): Use ada_to_fixed_value
4034 to avoid code duplication and fix a bug in the handling of
4035 fixed types contents.
4037 2010-04-20 Tom Tromey <tromey@redhat.com>
4039 * dwarf2read.c (dwarf2_compute_name): Handle DW_AT_linkage_name.
4040 (read_partial_die): Likewise.
4041 (dwarf_attr_name): Likewise.
4043 2010-04-20 Chris Moller <cmoller@redhat.com>
4047 * cp-valprint.c (global): Adding new static array recursion
4049 (cp_print_value_fields, cp_print_static_field): Added new static
4050 array recursion detection code.
4052 2010-04-20 Mark Kettenis <kettenis@gnu.org>
4054 * i386-linux-tdep.c (i386_linux_regset_sections): Size of the
4055 general-purpose register set should be 68 instead of 144.
4056 (i386_linux_sse_regset_sections): Likewise.
4057 (i386_linux_avx_regset_sections): Likewise.
4059 2010-04-20 Stan Shebs <stan@codesourcery.com>
4060 Nathan Sidwell <nathan@codesourcery.com>
4062 * dwarf2loc.c (struct axs_var_loc): New struct.
4063 (dwarf2_tracepoint_var_loc): New function.
4064 (dwarf2_tracepoint_var_access): New function.
4065 (dwarf2_tracepoint_var_ref): Use dwarf2_tracepoint_var_loc, deal
4067 (locexpr_describe_location_piece): New function.
4068 (locexpr_describe_location_1): New function.
4069 (locexpr_describe_location): Call it, update signature.
4070 (loclist_describe_location): Rewrite to loop over locations,
4072 * symtab.h (struct symbol_computed_ops): Add address to
4073 describe_location arguments, return void.
4074 * printcmd.c (address_info): Get context PC, pass to computed
4075 location description.
4076 * tracepoint.c (scope_info): Ditto.
4077 * ax-gdb.c (trace_kludge): Export.
4079 2010-04-20 Tom Tromey <tromey@redhat.com>
4081 * dwarf2-frame.c (decode_frame_entry_1): Handle CIE version 4.
4082 (struct dwarf2_cie) <segment_size>: New field.
4083 * dwarf2read.c (partial_read_comp_unit_head): Accept DWARF 4.
4084 (skip_one_die): Handle DW_FORM_flag_present, DW_FORM_sec_offset,
4086 (read_attribute_value): Handle DW_FORM_flag_present,
4087 DW_FORM_sec_offset, DW_FORM_exprloc.
4088 (dump_die_shallow): Likewise.
4089 (attr_form_is_section_offset): Handle DW_FORM_sec_offset.
4090 (dwarf2_const_value): Handle DW_FORM_exprloc.
4091 (attr_form_is_block): Likewise.
4092 (struct line_header) <maximum_ops_per_instruction>: New field.
4093 (dwarf_decode_line_header): Set new field.
4094 (dwarf_decode_lines): Handle new field.
4096 2010-04-20 Jan Kratochvil <jan.kratochvil@redhat.com>
4098 * f-exp.y: Add new production to recognize the `logical*8' type.
4099 (LOGICAL_S8_KEYWORD): New token.
4100 * f-lang.c (enum f_primitive_types)
4101 <f_primitive_type_logical_s8>: New field.
4102 (f_language_arch_info): Handling `logical*8' type.
4103 (build_fortran_types): Building `logical*8' type.
4104 * f-lang.h (struct builtin_f_type) <builtin_logical_s8>: New field.
4106 2010-04-19 Doug Evans <dje@google.com>
4108 * ser-base.c (generic_readchar): Watch for EOF in read of error_fd.
4109 * ser-pipe.c (pipe_open): Fix file descriptor leaks.
4110 (pipe_close): Ditto.
4112 2010-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
4114 * configure.tgt (x86_64-*-mingw*): Set BUILD_GDBSERVER to yes.
4116 2010-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
4118 * windows-tdep.c (windows_get_tlb_type): Change current_seh.handle
4119 type to void function.
4121 2010-04-19 Stan Shebs <stan@codesourcery.com>
4122 Vladimir Prus <vladimir@codesourcery.com>
4124 * tracepoint.c (tfind_1): Add missing newline, report exit from
4126 * target.c (update_current_target): Make default
4127 to_trace_find return -1.
4129 2010-04-19 Mike Frysinger <vapier@gentoo.org>
4131 * objc-lang.c (find_methods): Move symname check up.
4133 2010-04-19 Pedro Alves <pedro@codesourcery.com>
4135 * ada-lang.c (print_recreate_exception)
4136 <ex_catch_exception_unhandled>: It's "catch exception unhandled",
4137 not "catch unhandled".
4139 2010-04-19 Pedro Alves <pedro@codesourcery.com>
4141 PR breakpoints/8554.
4143 Implement `save-breakpoints'.
4145 * breakpoint.c (save_cmdlist): New.
4146 (breakpoint_set_cmdlist, breakpoint_show_cmdlist): Moved up close
4148 (print_recreate_catch_fork): New.
4149 (catch_fork_breakpoint_ops): Install it.
4150 (print_recreate_catch_vfork): New.
4151 (catch_vfork_breakpoint_ops): Install it.
4152 (print_recreate_catch_syscall): New.
4153 (catch_syscall_breakpoint_ops): Install it.
4154 (print_recreate_catch_exec): New.
4155 (catch_exec_breakpoint_ops): Install it.
4156 (print_recreate_exception_catchpoint): New.
4157 (gnu_v3_exception_catchpoint_ops): Install it.
4158 (save_breakpoints): New, based on tracepoint_save_command, but
4159 handle all breakpoint types.
4160 (save_breakpoints_command): New.
4161 (tracepoint_save_command): Rename to...
4162 (save_tracepoints_command): ... this, and reimplement using
4164 (save_command): New.
4165 (_initialize_breakpoints): Install the "save" command prefix.
4166 Install the "save breakpoints" command. Make "save-tracepoints" a
4167 deprecated alias for "save tracepoints".
4168 * breakpoint.h (struct breakpoint_ops): New field `print_recreate'.
4169 * ada-lang.c (print_recreate_exception): New.
4170 (print_recreate_catch_exception): New.
4171 (catch_exception_breakpoint_ops): Install it.
4172 (print_recreate_catch_exception_unhandled): New.
4173 (catch_exception_unhandled_breakpoint_ops): Install it.
4174 (print_recreate_catch_assert): New.
4175 (catch_assert_breakpoint_ops): Install it.
4177 * NEWS: Mention the new `save breakpoints' command. Mention the
4178 new `save tracepoints' alias and that `save-tracepoints' is now
4181 2010-04-18 Pedro Alves <pedro@codesourcery.com>
4185 * tui/tui-out.c: Include cli-out.h.
4186 (tui_table_begin, tui_table_body, tui_table_end, tui_table_header)
4187 (tui_begin, tui_end, tui_field_int, tui_field_skip)
4188 (tui_field_string, tui_field_fmt, tui_spaces, tui_text)
4189 (tui_message, tui_wrap_hint, tui_flush): Delete forward
4191 (struct ui_out_data): Rename to...
4192 (struct tui_ui_out_data): ... this. Remove `stream' and
4193 `suppress_output' fields, and inherit cli_ui_out_data.
4194 (tui_out_data): New typedef.
4195 (tui_ui_out_impl): Don't initialize fields staticaly.
4196 (tui_table_begin, tui_table_body, tui_table_end, tui_table_header)
4197 (tui_begin, tui_end): Delete.
4198 (tui_field_int): Adjust to delegate most work to the base type.
4199 (tui_field_skip): Delete.
4200 (tui_field_string, tui_field_fmt): Adjust comment. Adjust to
4201 delegate most work to the base type.
4202 (tui_spaces): Delete.
4203 (tui_text): Adjust to delegate most work to the base type.
4204 (tui_message): Delete.
4205 (tui_wrap_hint): Delete.
4206 (tui_flush): Delete.
4207 (out_field_fmt): Delete.
4208 (field_separator): Delete.
4209 (tui_out_new): Adjust to initialize the base type.
4210 (_initialize_tui_out): Initialize tui_ui_out_impl.
4211 * cli-out.c (struct ui_out_data): Moved out to cli-out.h, renamed
4213 (cli_out_data): Adjust.
4214 (cli_ui_out_impl): Make extern.
4215 (cli_table_header, cli_field_int, cli_field_skip): Use
4216 uo_field_string instead of cli_field_string.
4217 (cli_redirect): Adjust to use cli_out_data.
4218 (cli_out_data_ctor): New.
4219 (cli_out_new): Use it.
4220 * cli-out.h (struct ui_file): Remove forward declaration.
4221 (struct cli_ui_out_data): New, moved from cli-out.c, and renamed.
4222 (cli_ui_out_impl): Declare.
4223 (cli_out_data_ctor): Declare.
4224 * ui-out.c (struct ui_out) <data>: Change type to void pointer.
4225 (uo_field_string): No longer static.
4226 (ui_out_data): Change return type to void pointer.
4227 (ui_out_new): Change `data' parameter type to void pointer.
4228 * ui-out.h (struct ui_out_data): Don't forward declare.
4229 (ui_out_data): Change return type to void pointer.
4230 (ui_out_new): Change `data' parameter type to void pointer.
4231 (uo_field_string): Declare.
4233 2010-04-17 Pedro Alves <pedro@codesourcery.com>
4235 * ui-file.c (tee_file_isatty): Return whether `tee->one' is a tty,
4236 instead of always false.
4238 2010-04-17 H.J. Lu <hongjiu.lu@intel.com>
4241 * amd64-linux-tdep.c (amd64_linux_gregset_reg_offset): Support
4244 2010-04-17 Pedro Alves <pedro@codesourcery.com>
4246 * breakpoint.c (watchpoints_triggered): Use
4247 is_hardware_watchpoint.
4248 (watchpoints_triggered): Ditto.
4249 (bpstat_check_location): Use is_watchpoint and
4250 is_hardware_watchpoint.
4251 (bpstat_check_watchpoint): Use is_watchpoint and
4252 is_hardware_watchpoint.
4253 (bpstat_stop_status): Fix comment.
4254 (user_settable_breakpoint): Use is_watchpoint.
4255 (hw_watchpoint_used_count): Use is_hardware_watchpoint.
4256 (disable_watchpoints_before_interactive_call_start): Use
4258 (enable_watchpoints_after_interactive_call_stop): Use
4260 (clear_command): Use is_watchpoint.
4261 (do_enable_breakpoint): Use is_watchpoint.
4263 2010-04-16 Mike Frysinger <vapier@gentoo.org>
4265 * solib-frv.c (enable_break1_done): Delete.
4266 (enable_break2): Do not check enable_break1_done. Move the
4267 enable_break2_done setting and call to
4268 remove_solib_event_breakpoints() to the end. Return without
4269 warning when the contents of _dl_debug_addr are 0.
4270 (enable_break): Do not set enable_break1_done.
4271 (frv_clear_solib): Likewise.
4273 2010-04-16 Kevin Buettner <kevinb@redhat.com>
4275 * m32c-tdep.c (m32c_m16c_address_to_pointer): Print warning
4276 instead of an error if no PLT entry is found. Return a
4277 potentially useful result.
4278 (m32c_m16c_pointer_to_address): Add code to search for function
4279 address when no .plt entry is found.
4281 2010-04-16 Stan Shebs <stan@codesourcery.com>
4283 * tracepoint.c (trace_variable_command): Run a cleanup.
4285 2010-04-16 Pierre Muller <muller@ics.u-strasbg.fr>
4287 * p-lang.c (pascal_one_char): Do not restrict C to 0..255 range.
4289 2010-04-16 Pierre Muller <muller@ics.u-strasbg.fr>
4291 Support for Windows OS Thread Information Block.
4292 * NEWS: Document new feature.
4293 * remote.c (PACKET_qGetTIBAddr): New enum element.
4294 (remote_get_tib_address): New function.
4295 (init_remote_ops): Set to_get_tib_address field
4296 to remote_get_tib_address.
4297 (_initialize_remote): Add add_packet_config_cmd
4298 for PACKET_qGetTIBAddr.
4299 * target.c (update_current_target): Set default value for
4300 new to_get_tib_address field.
4301 * target.h (target_ops): New field to_get_tib_address.
4302 (target_get_tib_address): New macro.
4303 * windows-nat.c (thread_info): Add thread_local_base field.
4304 (windows_add_thread): Add tlb argument of type 'void *'.
4305 (fake_create_process): Adapt windows_add_thread call.
4306 (get_windows_debug_event): Idem.
4307 (windows_get_tib_address): New function.
4308 (init_windows_ops): Set to_get_tib_address field
4309 to remote_get_tib_address.
4310 (_initialize_windows_nat): Replace info_w32_cmdlist
4311 initialization by a call to init_w32_command_list.
4312 (info_w32_command, info_w32_cmdlist): Removed from here...
4313 to windows-tdep.c file.
4314 * windows-tdep.h (info_w32_cmdlist): Declare.
4315 (init_w32_command_list): New external function
4317 * windows-tdep.c: Add several headers.
4318 (info_w32_cmdlist): to here, made global.
4319 (thread_information_32): New struct.
4320 (thread_information_64): New struct.
4321 (TIB_NAME): New char array.
4322 (MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
4323 (maint_display_all_tib): New static variable.
4324 (windows_get_tlb_type): New function.
4325 (tlb_value_read, tlb_value_write): New functions.
4326 (tlb_value_funcs): New static struct.
4327 (tlb_make_value): New function.
4328 (display_one_tib): New function.
4329 (display_tib): New function.
4330 (show_maint_show_all_tib):New function.
4331 (info_w32_command): Moved from windows-nat.c.
4332 (init_w32_command_list): New function.
4333 (_initialize_windows_tdep): New function.
4334 New "maint set/show show-all-tib" command
4335 New "$_tlb" internal variable.
4337 2010-04-16 Joel Brobecker <brobecker@adacore.com>
4339 * tui/tui-regs.c (tui_display_register): Add comment about
4341 * tui/tui-stack.c (tui_show_locator_content): Ditto.
4343 2010-04-15 Stan Shebs <stan@codesourcery.com>
4345 * frame.c: Include tracepoint.h.
4346 (get_current_frame): Allow a trace frame to be an alternate source
4347 of stack frame data.
4348 * tracepoint.c (tfind_1): Don't try to get current stack frame if
4351 2010-04-15 Pedro Alves <pedro@codesourcery.com>
4353 * ppc-linux-tdep.c (bsd_uthread_solib_loaded): Always pass 0 for
4355 * solib-spu.c (spu_solib_loaded): Always pass 0 for flags.
4357 2010-04-15 Doug Evans <dje@google.com>
4359 * NEWS: Add entry for python program space support.
4360 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-progspace.o.
4361 (SUBDIR_PYTHON_SRCS): Add py-progspace.c.
4362 (py-progspace.o): New rule.
4363 * python/py-prettyprint.c (find_pretty_printer_from_objfiles): New
4365 (find_pretty_printer_from_progspace): New function.
4366 (find_pretty_printer_from_gdb): New function.
4367 (find_pretty_printer): Rewrite.
4368 * python/py-progspace.c: New file.
4369 * python/python-internal.h (program_space): Add forward decl.
4370 (pspace_to_pspace_object, pspy_get_printers): Declare.
4371 (gdbpy_initialize_pspace): Declare.
4372 * python/python.c: #include "progspace.h".
4373 (gdbpy_get_current_progspace, gdbpy_progspaces): New functions.
4374 (_initialize_python): Call gdbpy_initialize_pspace.
4375 (GdbMethods): Add current_progspace, progspaces.
4377 Add -s option to source command.
4378 * NEWS: Document new option.
4379 * cli/cli-cmds.c (find_and_open_script): Add function comment.
4380 Delete from_tty and cleanupp args. Split filep arg into file and
4381 full_pathp. New arg search_path.
4382 (source_script_from_stream): New function.
4383 (source_script_with_search): New function.
4384 (source_script): Rewrite.
4385 (source_command): Parse "-s" option.
4386 (init_cli_cmds): Add "-s" docs to source command help, and reformat.
4387 * python/python.c (source_python_script): Make file arg a const char *.
4388 Don't call fclose, leave for caller.
4389 * python/python.h (source_python_script): Update.
4391 2010-04-14 Daniel Jacobowitz <dan@codesourcery.com>
4392 Pedro Alves <pedro@codesourcery.com>
4394 Avoid rereading shared libraries that haven't changed.
4396 * solib.c (free_so_symbols): New function, from ...
4397 (free_so): ... here. Call it.
4398 (solib_read_symbols): Don't warn here if symbols have already been
4400 (solib_add): Warn here instead, if a pattern was specified.
4401 (reload_shared_libraries_1): New.
4402 (reload_shared_libraries): Rewrite to not fetch the library list.
4404 2010-04-14 Doug Evans <dje@google.com>
4406 * source.c (openp): Strip DOS drive letter if present before
4407 concatenating string to search path.
4409 2010-04-14 Pedro Alves <pedro@codesourcery.com>
4411 * objfiles.h (gdb_bfd_close_or_warn): Declare.
4412 * objfiles.c (gdb_bfd_close_or_warn): New.
4413 * corelow.c: Include objfiles.h
4414 (core_close): Use gdb_bfd_close_or_warn.
4415 * elfread.c (build_id_verify): Ditto.
4416 * exec.c (exec_close, exec_close_1): Ditto.
4418 2010-04-14 Daniel Jacobowitz <dan@codesourcery.com>
4419 Pedro Alves <pedro@codesourcery.com>
4421 Group errors for many missing shared libraries.
4423 * solist.h (struct so_list): Remove from_tty.
4424 * solib.c (solib_bfd_open): Return NULL if we failed to open a BFD.
4425 (solib_map_sections): Take so_list argument. Return 0 if we
4426 failed to open a BFD. Add target sections here.
4427 (symbol_add_stub): Delete.
4428 (solib_read_symbols): Inline symbol_add_stub. Use current flags,
4429 not from_tty copied from the so_list. Don't warn a second time
4430 for a missing library.
4431 (update_solib_list): Don't save from_tty. Use TRY_CATCH. Do not
4432 add to the section table here. Print out a single warning for all
4434 * bsd-uthread.c (bsd_uthread_solib_loaded): Always pass 0 for
4437 2010-04-14 Phil Muldoon <pmuldoon@redhat.com>
4439 * python/py-block.c (gdbpy_block_for_pc): Use i8n to encompass
4440 error/warning messages. Capitalize and use complete sentences.
4441 (blpy_block_syms_iternext): Likewise.
4442 * python/py-cmd.c (parse_command_name, cmdpy_init): Likewise.
4443 * python/py-frame.c (FRAPY_REQUIRE_VALID, frapy_block)
4444 (frame_info_to_frame_object, frapy_read_var)
4445 (gdbpy_frame_stop_reason_string): Likewise.
4446 * python/py-lazy-string.c (stpy_convert_to_value)
4447 (gdbpy_create_lazy_string_object): Likewise.
4448 * python/py-objfile.c (objfpy_set_printers): Likewise.
4449 * python/py-prettyprint.c (gdbpy_default_visualizer): Likewise.
4450 * python/python.c (parameter_to_python): Likewise.
4451 * python/py-type.c (typy_range, typy_target): Likewise.
4452 * python/py-value.c (valpy_cast, valpy_length, valpy_getitem)
4453 (valpy_richcompare, valpy_int, valpy_long, valpy_float): Likewise.
4456 2010-04-14 Phil Muldoon <pmuldoon@redhat.com>
4460 * python/py-prettyprint.c (pretty_print_one_value): Test for
4462 (print_string_repr): Test for Py_None. Set flags accordingly.
4463 Return value depending on return type.
4464 (print_children): Take a value indicating whether data was printed
4465 before this function was called. Alter output accordingly.
4466 (apply_val_pretty_printer): Capture return value from
4467 print_string_repr and pass to print_children.
4469 2010-04-13 Mark Kettenis <kettenis@gnu.org>
4472 * i386-linux-tdep.c (i386_linux_regset_sections): Remove extended
4473 register note sections.
4474 (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections):
4476 (i386_linux_init_abi): Install list of supported register note
4477 sections that matches the target description.
4479 2010-04-13 Pedro Alves <pedro@codesourcery.com>
4481 * remote.c (remote_get_noisy_reply): Don't error out on empty
4483 (remote_start_remote): Update and merge tracepoints and trace
4484 state variables as long as the target supports tracepoints.
4485 (remote_trace_init): Fix prototype.
4486 (remote_download_trace_state_variable): Validate reply.
4487 (remote_trace_set_readonly_regions): Fix prototype.
4488 (remote_trace_start): Fix prototype. Check for empty reply.
4489 (remote_get_trace_status): Small cleanup.
4490 (remote_trace_stop): Fix prototype. Check for empty reply.
4491 (remote_trace_find): Check for empty reply.
4492 (remote_save_trace_data): Validate reply.
4493 (remote_set_disconnected_tracing): Check for empty reply, and
4495 (remote_set_circular_trace_buffer): Ditto.
4497 2010-04-13 Pierre Muller <muller@ics.u-strasbg.fr>
4499 Suppress unused value warning during compilation.
4500 * tui/tui-regs.c (tui_display_register): Cast wstandout and wstandend
4502 * tui/tui-stack.c (tui_show_locator_content): Likewise.
4504 2010-04-12 Stan Shebs <stan@codesourcery.com>
4506 * tracepoint.c (tfile_xfer_partial): Check read result.
4508 2010-04-12 Mike Frysinger <vapier@gentoo.org>
4510 * remote-m32r-sdi.c (m32r_files_info): Add const to local "file" var.
4511 * remote-sim.c (gdbsim_files_info): Likewise.
4513 2010-04-12 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
4515 * arm-tdep.h (gdb_regnum): Add ARM_FPSCR_REGNUM
4516 * arm-linux-nat.c (arm_linux_vfp_register_count): New
4518 (fetch_vfp_registers): New function to fetch VFP registers.
4519 (store_vfp_registers): New function to store VFP registers.
4520 (arm_linux_fetch_inferior_registers): Add support for VFP
4522 (arm_linux_store_inferior_registers): Likewise.
4523 (arm_linux_read_description): Likewise.
4524 (_initialize_arm_linux_nat): Delay initialising iWMMX tdesc
4527 2010-04-11 H.J. Lu <hongjiu.lu@intel.com>
4529 * amd64-tdep.c (amd64_supply_xstateregset): Remove the unused
4531 (amd64_collect_xstateregset): Likewise.
4533 2010-04-09 Stan Shebs <stan@codesourcery.com>
4535 * tracepoint.c (trace_status_mi): Report frames created.
4537 * tracepoint.c (trace_dump_command): Include default-collect
4540 2010-04-09 Ulrich Weigand <uweigand@de.ibm.com>
4542 * symtab.c (find_function_start_sal): Never return SAL pointing
4543 before function start address, even if line info is missing.
4545 2010-04-09 Pedro Alves <pedro@codesourcery.com>
4547 * NEWS: Mention tracepoints support.
4549 2010-04-09 Pedro Alves <pedro@codesourcery.com>
4551 * tracepoint.c (trace_status_mi): Report disconnected tracing and
4552 circular trace buffer statuses.
4554 2010-04-09 Jan Kratochvil <jan.kratochvil@redhat.com>
4556 * config/djgpp/fnchange.lst: Fix typo in translations for
4557 symbol-without-target_section.exp and symbol-without-target_section.c.
4559 2010-04-09 Pedro Alves <pedro@codesourcery.com>
4561 * breakpoint.c (condition_command): Pass condition expression to
4562 set_breakpoint_condition stripped from breakpoint number.
4564 2010-04-09 Phil Muldoon <pmuldoon@redhat.com>
4565 Thiago Jung Bauermann <bauerman@br.ibm.com>
4566 Tom Tromey <tromey@redhat.com>
4568 * breakpoint.c (condition_command): Simplify. Move condition
4570 (set_breakpoint_condition): ... here. New function.
4571 * breakpoint.h (set_breakpoint_condition): Declare.
4572 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpoint.
4573 (SUBDIR_PYTHON_SRCS): Likewise.
4574 (py-breakpoint.o): New rule.
4575 * python/py-breakpoint.c: New file.
4576 * python/python-internal.h (gdbpy_breakpoints)
4577 (gdbpy_initialize_breakpoints): Declare.
4578 (GDB_PY_SET_HANDLE_EXCEPTION) Define.
4580 2010-04-09 Pedro Alves <pedro@codesourcery.com>
4582 * regformats/regdat.sh: Include server.h. Don't include
4585 2010-04-08 Stan Shebs <stan@codesourcery.com>
4586 Pedro Alves <pedro@codesourcery.com>
4588 * tracepoint.h (struct trace_status): New fields disconnected_tracing
4589 and circular_buffer.
4590 (disconnect_tracing): Rename from disconnect_or_stop_tracing.
4591 * tracepoint.c (trace_status_command): Display target's status for
4592 disconnected tracing and circular buffer.
4593 (disconnect_tracing): Rename from disconnect_or_stop_tracing, add
4594 query for non-disconnected-tracing case, remove the stop_tracing
4596 (tfile_open): Clear disconnected and circular buffer status.
4597 (trace_save): Save disconnected and circular buffer status.
4598 (parse_trace_status): Parse disconnected and circular buffer status,
4599 also recognize disconnected as a stop reason.
4600 * remote.c (remote_set_disconnected_tracing): Only set
4601 QTDisconnected if the remote end supports disconnected tracing.
4602 Warn otherwise, if trying to enable disconnected tracing.
4603 * infcmd.c (detach_command): Update disconnect_tracing call.
4604 * cli/cli-cmds.c (quit_command): Ditto.
4606 2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
4608 * i387-tdep.c (i387_collect_xsave): Replace abort with
4611 2010-04-08 Stan Shebs <stan@codesourcery.com>
4613 * breakpoint.c (default_collect_info): New function.
4614 (breakpoints_info): Call it.
4615 (maintenance_info_breakpoints): Ditto.
4616 (tracepoints_info): Ditto.
4618 2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
4620 * i387-tdep.c (i387_collect_xsave): Re-indent.
4622 2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
4624 * i386-linux-nat.c (have_ptrace_getfpxregs): Initialize to -1
4625 if HAVE_PTRACE_GETFPXREGS is defined.
4626 (i386_linux_read_description): Set have_ptrace_getfpxregs and
4627 have_ptrace_getregset to 0 if ptrace PTRACE_GETFPXREGS failed.
4629 * i386-linux-tdep.c: Include "features/i386/i386-mmx-linux.c"
4630 (i386_linux_core_read_description): Return tdesc_i386_mmx_linux
4631 if .reg-xfp section doesn't exist.
4632 (_initialize_i386_linux_tdep): Call initialize_tdesc_i386_mmx_linux.
4634 * i386-linux-tdep.h (tdesc_i386_mmx_linux): New.
4636 * i386-tdep.c: Include "features/i386/i386-mmx.c".
4637 (i386_go32_init_abi): Set tdesc to tdesc_i386_mmx.
4638 (i386_validate_tdesc_p): Make org.gnu.gdb.i386.sse optional. Set
4639 xcr0 to I386_XSTATE_X87_MASK if SSE isn't available.
4640 (i386_gdbarch_init): Update comments.
4641 (_initialize_i386_tdep): Call initialize_tdesc_i386_mmx.
4643 * common/i386-xstate.h (I386_XSTATE_X87_MASK): New.
4645 * config/djgpp/fnchange.lst: Add i386 MMX XML files.
4647 * features/Makefile (i386/i386-mmx-expedite): New.
4648 (i386/i386-mmx-linux-expedite): Likewise.
4649 ($(outdir)/i386/i386-mmx.dat): Likewise.
4650 ($(outdir)/i386/i386-mmx-linux.dat): Likewise.
4652 * features/i386/i386-mmx-linux.c: New.
4653 * features/i386/i386-mmx-linux.xml: Likewise.
4654 * features/i386/i386-mmx.c: Likewise.
4655 * features/i386/i386-mmx.xml: Likewise.
4656 * regformats/i386/i386-mmx-linux.dat: Likewise.
4657 * regformats/i386/i386-mmx.dat: Likewise.
4659 * features/Makefile (WHICH): Add i386/i386-mmx and
4660 i386/i386-mmx-linux.
4662 2010-04-08 Doug Evans <dje@google.com>
4664 * source.c (openp): Skip $cdir in PATH.
4666 2010-04-08 Phil Muldoon <pmuldoon@redhat.com>
4669 * python/py-lazy-string.c (stpy_convert_to_value): Check for
4671 (gdbpy_create_lazy_string_object): Allow strings with a NULL
4672 address and a zero length.
4674 2010-04-08 Hui Zhu <teawater@gmail.com>
4676 * i386-tdep.c (i386_process_record): Add support for insn
4679 2010-04-07 Doug Evans <dje@google.com>
4681 * python/python.c (source_python_script): Use ensure_python_env
4682 to prepare environment for script.
4684 2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
4686 * amd64-linux-nat.c: Include "regset.h", "elf/common.h",
4687 <sys/uio.h> and "i386-xstate.h".
4688 (PTRACE_GETREGSET): New.
4689 (PTRACE_SETREGSET): Likewise.
4690 (have_ptrace_getregset): Likewise.
4691 (amd64_linux_gregset64_reg_offset): Include 16 upper YMM
4693 (amd64_linux_gregset32_reg_offset): Include 8 upper YMM
4695 (amd64_linux_fetch_inferior_registers): Support PTRACE_GETFPREGS.
4696 (amd64_linux_store_inferior_registers): Likewise.
4697 (amd64_linux_read_description): Check and enable AVX target
4700 * amd64-linux-tdep.c: Include "regset.h", "i386-linux-tdep.h"
4701 and "features/i386/amd64-avx-linux.c".
4702 (amd64_linux_regset_sections): New.
4703 (amd64_linux_core_read_description): Check and enable AVX
4705 (amd64_linux_init_abi): Set xsave_xcr0_offset. Call
4706 set_gdbarch_core_regset_sections.
4707 (_initialize_amd64_linux_tdep): Call
4708 initialize_tdesc_amd64_avx_linux.
4710 * amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Replace
4711 AMD64_MXCSR_REGNUM with AMD64_YMM15H_REGNUM.
4712 (tdesc_amd64_avx_linux): New.
4713 (amd64_linux_update_xstateregset): Likewise.
4715 * amd64-tdep.c: Include "features/i386/amd64-avx.c".
4716 (amd64_ymm_names): New.
4717 (amd64_ymmh_names): Likewise.
4718 (amd64_register_name): Likewise.
4719 (amd64_supply_xstateregset): Likewise.
4720 (amd64_collect_xstateregset): Likewise.
4721 (amd64_supply_xsave): Likewise.
4722 (amd64_collect_xsave): Likewise.
4723 (AMD64_NUM_REGS): Removed.
4724 (amd64_dwarf_reg_to_regnum): Return %ymmN register number for
4725 %xmmN if AVX is available.
4726 (amd64_pseudo_register_name): Support pseudo YMM registers.
4727 (amd64_regset_from_core_section): Support .reg-xstate section.
4728 (amd64_init_abi): Set ymmh_register_names, num_ymm_regs
4729 and ymm0h_regnum. Call set_gdbarch_register_name.
4730 (amd64_init_abi): Call initialize_tdesc_amd64_avx.
4732 * amd64-tdep.h (amd64_regnum): Add AMD64_YMM0H_REGNUM and
4733 AMD64_YMM15H_REGNUM.
4734 (AMD64_NUM_REGS): New.
4735 (amd64_supply_xsave): Likewise.
4736 (amd64_collect_xsave): Likewise.
4737 (amd64_register_name): Removed.
4738 (amd64_register_type): Likewise.
4740 2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
4742 * i387-tdep.c: Include "i386-xstate.h".
4743 (XSAVE_XSTATE_BV_ADDR): New.
4744 (xsave_avxh_offset): Likewise.
4745 (XSAVE_AVXH_ADDR): Likewise.
4746 (i387_supply_xsave): Likewise.
4747 (i387_collect_xsave): Likewise.
4749 * i387-tdep.h (I387_NUM_YMM_REGS): New.
4750 (I387_YMM0H_REGNUM): Likewise.
4751 (I387_YMMENDH_REGNUM): Likewise.
4752 (i387_supply_xsave): Likewise.
4753 (i387_collect_xsave): Likewise.
4755 2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
4757 * i386-linux-nat.c: Include "regset.h", "elf/common.h",
4758 <sys/uio.h> and "i386-xstate.h".
4759 (PTRACE_GETREGSET): New.
4760 (PTRACE_SETREGSET): Likewise.
4761 (fetch_xstateregs): Likewise.
4762 (store_xstateregs): Likewise.
4763 (GETXSTATEREGS_SUPPLIES): Likewise.
4764 (regmap): Include 8 upper YMM registers.
4765 (i386_linux_fetch_inferior_registers): Support XSAVE extended
4767 (i386_linux_store_inferior_registers): Likewise.
4768 (i386_linux_read_description): Check and enable AVX target
4771 * i386-linux-tdep.c: Include "regset.h", "i387-tdep.h",
4772 "i386-xstate.h" and "features/i386/i386-avx-linux.c".
4773 (i386_linux_regset_sections): Add ".reg-xstate".
4774 (i386_linux_gregset_reg_offset): Include 8 upper YMM registers.
4775 (i386_linux_core_read_xcr0): New.
4776 (i386_linux_core_read_description): Check and enable AVX target
4778 (i386_linux_init_abi): Set xsave_xcr0_offset.
4779 (_initialize_i386_linux_tdep): Call
4780 initialize_tdesc_i386_avx_linux.
4782 * i386-linux-tdep.h (I386_LINUX_ORIG_EAX_REGNUM): Replace
4783 I386_SSE_NUM_REGS with I386_AVX_NUM_REGS.
4784 (i386_linux_core_read_xcr0): New.
4785 (tdesc_i386_avx_linux): Likewise.
4786 (I386_LINUX_XSAVE_XCR0_OFFSET): Likewise.
4788 * i386-tdep.c: Include "i386-xstate.h" and
4789 "features/i386/i386-avx.c".
4790 (i386_ymm_names): New.
4791 (i386_ymmh_names): Likewise.
4792 (i386_ymmh_regnum_p): Likewise.
4793 (i386_ymm_regnum_p): Likewise.
4794 (i386_xmm_regnum_p): Likewise.
4795 (i386_register_name): Likewise.
4796 (i386_ymm_type): Likewise.
4797 (i386_supply_xstateregset): Likewise.
4798 (i386_collect_xstateregset): Likewise.
4799 (i386_sse_regnum_p): Removed.
4800 (i386_pseudo_register_name): Support pseudo YMM registers.
4801 (i386_pseudo_register_type): Likewise.
4802 (i386_pseudo_register_read): Likewise.
4803 (i386_pseudo_register_write): Likewise.
4804 (i386_dbx_reg_to_regnum): Return %ymmN register number for
4805 %xmmN if AVX is available.
4806 (i386_regset_from_core_section): Support .reg-xstate section.
4807 (i386_register_reggroup_p): Supper upper YMM and YMM registers.
4808 (i386_process_record): Replace i386_sse_regnum_p with
4810 (i386_validate_tdesc_p): Support org.gnu.gdb.i386.avx feature.
4811 Set ymmh_register_names, num_ymm_regs, ymm0h_regnum and xcr0.
4812 (i386_gdbarch_init): Set xstateregset. Set xsave_xcr0_offset.
4813 Call set_gdbarch_register_name. Replace I386_SSE_NUM_REGS with
4814 I386_AVX_NUM_REGS. Set ymmh_register_names, ymm0h_regnum and
4815 num_ymm_regs. Add num_ymm_regs to set_gdbarch_num_pseudo_regs.
4817 (_initialize_i386_tdep): Call initialize_tdesc_i386_avx.
4819 * i386-tdep.h (gdbarch_tdep): Add xstateregset, ymm0_regnum,
4820 xcr0, xsave_xcr0_offset, ymm0h_regnum, ymmh_register_names and
4822 (i386_regnum): Add I386_YMM0H_REGNUM, and I386_YMM7H_REGNUM.
4823 (I386_AVX_NUM_REGS): New.
4824 (i386_xmm_regnum_p): Likewise.
4825 (i386_ymm_regnum_p): Likewise.
4826 (i386_ymmh_regnum_p): Likewise.
4828 * common/i386-xstate.h: New.
4830 2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
4832 * config/djgpp/fnchange.lst: Add x86 AVX XML files.
4834 * features/Makefile (WHICH): Add i386/i386-avx,
4835 i386/i386-avx-linux, i386/x86-64-avx and i386/x86-64-avx-linux.
4836 (i386/i386-avx-expedite): New.
4837 (i386/i386-avx-linux-expedite): Likewise.
4838 (i386/x86-64-avx-expedite):Likewise.
4839 (i386/x86-64-avx-linux-expedite): Likewise.
4840 ($(outdir)/i386/i386-avx.dat): New dependency.
4841 ($(outdir)/i386/i386-avx-linux.dat): Likewise.
4842 ($(outdir)/i386/x86-avx-64.dat): Likewise.
4843 ($(outdir)/i386/x86-64-avx-linux.dat): Likewise.
4845 * features/i386/32bit-avx.xml: New.
4846 * features/i386/64bit-avx.xml: Likewise.
4847 * features/i386/i386-avx-linux.c: Likewise.
4848 * features/i386/i386-avx-linux.xml: Likewise.
4849 * features/i386/i386-avx.c: Likewise.
4850 * features/i386/i386-avx.xml: Likewise.
4851 * features/i386/x86-64-avx-linux.c: Likewise.
4852 * features/i386/x86-64-avx-linux.xml: Likewise.
4853 * features/i386/x86-64-avx.c: Likewise.
4854 * features/i386/x86-64-avx.xml: Likewise.
4855 * regformats/i386/i386-avx-linux.dat: Likewise.
4856 * regformats/i386/i386-avx.dat: Likewise.
4857 * regformats/i386/x86-64-avx-linux.dat: Likewise.
4858 * regformats/i386/x86-64-avx.dat: Likewise.
4860 2010-04-07 Doug Evans <dje@google.com>
4862 * top.c (source_file_name): Make const char *.
4863 * top.h (source_file_name): Update.
4864 * cli/cli-script.c (source_cleanup_lines_args): Make old_file
4866 (script_from_file): Change `file' arg to const char *.
4867 * cli/cli-script.h (script_from_file): Update.
4869 2010-04-06 Doug Evans <dje@google.com>
4871 * cli/cli-cmds.c (source_command): Run cleanups.
4873 2010-04-06 Stan Shebs <stan@codesourcery.com>
4875 * defs.h (char_ptr): Move typedef here from...
4876 * ada-lang.c (char_ptr): Remove.
4877 * charset.c (char_ptr): Remove.
4878 * tracepoint.h (struct uploaded_string): Remove.
4879 (struct uploaded_tp): Use vectors for string arrays.
4880 * tracepoint.c (trace_save): Use vectors of actions.
4881 (parse_tracepoint_definition): Ditto.
4882 (get_uploaded_tp): Clear vectors.
4883 * breakpoint.c (create_tracepoint_from_upload): Use vectors.
4884 (next_cmd): Change to an int.
4885 (read_next_cmd): Use vector of command strings.
4887 2010-04-06 Doug Evans <dje@google.com>
4889 * top.h (source_script, cd_command): Delete.
4890 * main.c: #include "cli/cli-cmds.h"
4892 2010-04-06 Kevin Buettner <kevinb@redhat.com>
4894 * m32c-tdep.c (make_types): When calling `arch_type', pass size of
4895 type in bytes, not bits.
4897 2010-04-06 Pierre Muller <muller@ics.u-strasbg.fr>
4899 * stabsread.c (define_symbol): Add support for char
4900 and string constants.
4902 2010-04-06 Pierre Muller <muller@ics.u-strasbg.fr>
4904 Remove remaining "%ll" uses.
4905 * go32-nat.c (go32_pte_for_address): Replace "0x%llx" using
4907 * rs6000-nat.c (rs6000_ptrace64): Idem.
4908 * solib-pa64.c (pa64_current_sos): Idem.
4909 * solib-spu.c (spu_current_sos): Idem.
4910 * linux-nat.c (linux_nat_find_memory_regions): Replace "%lld" using
4912 * nto-procfs.c (procfs_meminfo): Replace "0x%016llx" using
4914 * sh64-tdep.c (sh64_show_media_regs): Idem.
4916 2010-04-05 Stan Shebs <stan@codesourcery.com>
4918 * tracepoint.c: Include gdbcore.h.
4919 (tfile_xfer_partial): Return partial results, also try reading
4921 (tfile_has_all_memory): New function.
4922 (init_tfile_ops): Use it.
4924 2010-04-05 Sergio Durigan Junior <sergiodj@redhat.com>
4927 * xml-syscall.c (my_gdb_datadir): New variable to keep track of
4928 the changes in data-directory.
4929 (init_sysinfo): Reload the syscall XML file if the data-directory
4932 2010-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
4935 * breakpoint.c (bpstat_stop_status): Use bpstat_causes_stop.
4937 2010-04-04 Stan Shebs <stan@codesourcery.com>
4938 Nathan Sidwell <nathan@codesourcery.com>
4940 * breakpoint.c (breakpoint_1): Add filter argument, return number of
4941 breakpoints printed.
4942 (is_hardware_watchpoint): Make argument const.
4943 (is_watchpoint): Ditto.
4944 (is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint,
4946 (breakpoints_info): Pass NULL to breakpoint_1.
4947 (maintenance_info_breakpoints): Ditto.
4948 (watchpoints_info): New function.
4949 (tracepoints_info): Use breakpoint_1 filter.
4950 (set_ignore_count): Warn that tracepoint ignore count will be ignored.
4951 (_initialize_breakpoint): Make "info watchpoints" its own command.
4952 * breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint.
4953 * mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint.
4955 2010-04-04 Stan Shebs <stan@codesourcery.com>
4957 * tracepoint.c (tfile_fetch_registers): Add fallback case.
4959 2010-04-04 Jan Kratochvil <jan.kratochvil@redhat.com>
4961 * infcmd.c (run_command_1): Call proceed with regcache_read_pc address.
4962 * config/djgpp/fnchange.lst: Add translation for break-entry.exp.
4964 2010-04-04 Jan Kratochvil <jan.kratochvil@redhat.com>
4966 * breakpoint.c (bpstat_find_step_resume_breakpoint): Remove.
4967 * breakpoint.h (bpstat_find_step_resume_breakpoint): Remove.
4969 2010-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
4971 * dwarf2read.c (read_namespace_type): Use common "return set_die_type"
4974 2010-04-02 Hui Zhu <teawater@gmail.com>
4976 * i386-tdep.c (OT_DQUAD): New enum.
4977 (i386_process_record): Add code for MMX, 3DNow!, SSE, SSE2,
4978 SSE3, SSSE3 and SSE4.
4980 2010-04-02 Hui Zhu <teawater@gmail.com>
4982 * i386-tdep.c (i386_record_lea_modrm_addr): Remove useless
4985 2010-04-02 Pedro Alves <pedro@codesourcery.com>
4987 * tracepoint.c (trace_dump_actions): New, factored out from
4988 trace_dump_command, and adjusted to recurse into while-stepping's
4990 (trace_dump_command): Use it.
4992 2010-04-02 Pedro Alves <pedro@codesourcery.com>
4994 * breakpoint.h (struct counted_command_line): Moved definition to
4995 breakpoint.c, and forward declare.
4996 (breakpoint_commands): Declare.
4997 * breakpoint.c (struct counted_command_line): Moved here.
4998 (breakpoint_commands): New.
4999 * tracepoint.c (encode_actions): Use breakpoint_commands.
5000 * remote.c (remote_download_tracepoint): Ditto.
5002 2010-04-01 H.J. Lu <hongjiu.lu@intel.com>
5004 * remote.c (remote_parse_stop_reply): Use hex_string instead
5005 of phex_nz for error.
5007 2010-04-01 Stan Shebs <stan@codesourcery.com>
5008 Nathan Sidwell <nathan@codesourcery.com>
5010 * tracepoint.h (enum actionline_type): Remove.
5011 (validate_actionline): Change return to void.
5012 * tracepoint.c (report_agent_reqs_errors): New function.
5013 (validate_actionline): Call it, change return to void, report errors
5015 (collect_symbol): Call report_agent_reqs_errors.
5016 (encode_actions_1): Ditto.
5017 (encode_actions): Don't expect a result from validate_actionline.
5019 2010-04-01 Stan Shebs <stan@codesourcery.com>
5021 * tracepoint.c (trace_start_command): Confirm if trace is running.
5022 (trace_stop_command): Error if trace not running.
5024 2010-04-01 H.J. Lu <hongjiu.lu@intel.com>
5026 * amd64-tdep.c (amd64_byte_names): Add "ah", "bh", "ch", "dh".
5027 (AMD64_NUM_LOWER_BYTE_REGS): New.
5028 (amd64_pseudo_register_read): Handle "ah", "bh", "ch", "dh".
5029 (amd64_pseudo_register_write): Likewise.
5030 (amd64_init_abi): Set num_byte_regs to 20.
5032 2010-04-01 Pedro Alves <pedro@codesourcery.com>
5034 * breakpoint.c (multi_start, multi_end, last_was_multi): Delete.
5035 (prev_breakpoint_count): New.
5036 (set_breakpoint_count): Adjust.
5037 (rbreak_start_breakpoint_count): New.
5038 (start_rbreak_breakpoints): Adjust.
5039 (end_rbreak_breakpoints): Adjust.
5040 (struct commands_info) <arg>: New field.
5041 (do_map_commands_command): Tweak output to include breakpoint spec
5043 (commands_command_1): Adjust. Avoid setting an xfree cleanup if
5044 ARG was empty on entry. Set INFO's arg.
5045 (create_breakpoint): Adjust.
5047 * NEWS: Clarify `commands' changes.
5049 2010-04-01 Pedro Alves <pedro@codesourcery.com>
5051 * tracepoint.c: Include stack.h.
5052 (struct add_local_symbols_data): New.
5053 (do_collect_symbol): New.
5054 (add_local_symbols): Rewrite using iterate_over_block_arg_vars and
5055 iterate_over_block_local_vars.
5056 * stack.c (print_block_frame_locals): Rewrite as ...
5057 (iterate_over_block_locals): ... this. Take a callback function
5058 pointer and generic data pointer, and call that instead of
5059 print_variable_and_value.
5060 (struct print_variable_and_value_data): New.
5061 (do_print_variable_and_value): New.
5062 (iterate_over_block_local_vars): New, abstracted out from
5063 print_frame_local_vars.
5064 (print_frame_local_vars): Rewrite using
5065 iterate_over_block_local_vars.
5066 (iterate_over_block_arg_vars): New, abstracted out from
5067 print_frame_arg_vars.
5068 (print_frame_arg_vars): Rewrite using iterate_over_block_arg_vars.
5069 * stack.h (iterate_over_block_arg_local_vars_cb): New typedef.
5070 (iterate_over_block_arg_vars, iterate_over_block_local_vars): Declare.
5072 2010-03-31 Richard Earnshaw <rearnsha@arm.com>
5074 * arm-tdep.c (thumb_get_next_pc_raw): Correctly detect TBH
5075 instructions. Use the PC+4 if the base of the TBB or TBH is the
5078 2010-03-31 Jan Kratochvil <jan.kratochvil@redhat.com>
5080 Fix crash on reading wrong function declaration DWARF.
5081 * dwarf2read.c (read_subroutine_type): New variable void_type.
5082 Pre-fill all TYPE_FIELD_TYPEs. Move nparams and iparams initialization
5083 more close to their use.
5085 2010-03-31 Stan Shebs <stan@codesourcery.com>
5087 * breakpoint.c (tracepoint_save_command): Include variables,
5088 conditionals, tracepoint types, and default-collect.
5089 * tracepoint.c (save_trace_state_variables): New function.
5090 * tracepoint.h (save_trace_state_variables): Declare it.
5092 2010-03-31 Pierre Muller <muller@ics.u-strasbg.fr>
5094 * remote.c (end_thread): ARI fix: Use xstrdup instead of strdup.
5096 2010-03-30 Keith Seitz <keiths@redhat.com>
5098 * c-typeprint.c (c_type_print_args): Don't print "void"
5099 for java, regardless of whether it is TYPE_PROTOTYPED.
5100 Use the passed-in language instead of current_language.
5101 (c_type_print_varspec_suffix): Use current_language instead
5102 of assuming language_c.
5103 * jv-typeprint.c (java_type_print_base): (bz 9320) Strip off
5104 any return type specifier from the physname.
5106 2010-03-30 Pedro Alves <pedro@codesourcery.com>
5108 * tui/tui-interp.c (tui_is_toplevel): New.
5110 (tui_allowed_p): New.
5111 * tui/tui.c (tui_enable): Check if the TUI is allowed before
5113 * tui/tui.h (tui_allowed_p): Declare.
5115 2010-03-30 Ozkan Sezer <sezeroz@gmail.com>
5117 * serial.h: Include winsock2.h before windows.h.
5119 2010-03-30 H.J. Lu <hongjiu.lu@intel.com>
5121 * NEWS: Mention xmlRegisters= in qSupported packet.
5123 * i386-tdep.c: Include "remote.h".
5124 (_initialize_i386_tdep): Call register_remote_support_xml.
5126 * remote.c (remote_support_xml): New.
5127 (register_remote_support_xml): Likewise.
5128 (remote_query_supported_append): Likewise.
5129 (remote_query_supported): Support remote_support_xml.
5131 * remote.h (register_remote_support_xml): New.
5133 2010-03-29 Stan Shebs <stan@codesourcery.com>
5135 * tracepoint.c (trace_find_line_command): Remove dead code.
5137 * tracepoint.h (struct uploaded_string): New struct.
5138 (struct uploaded_tp): New fields for source strings.
5139 * breakpoint.c (this_utp, next_cmd): New globals.
5140 (read_uploaded_action): New function.
5141 (create_tracepoint_from_upload): Fill in more parts
5143 * tracepoint.c (encode_source_string): New function.
5144 (trace_save): Write out source strings, fix error checks.
5145 (parse_tracepoint_definition): Add source string parsing.
5146 * remote.c (PACKET_TracepointSource): New packet type.
5147 (remote_download_command_source): New function.
5148 (remote_download_tracepoint): Download source pieces also.
5149 (_initialize_remote): Add packet config command.
5151 * tracepoint.c (collect_symbol): Send LOC_UNRESOLVED symbols to
5154 * tracepoint.c (start_tracing): Check tracepoints before sending
5155 commands to target, don't start if all tracepoints disabled.
5157 2010-03-28 Pedro Alves <pedro@codesourcery.com>
5159 * cli/cli-script.c (process_next_line): Handle 'stepping'.
5161 2010-03-26 Stan Shebs <stan@codesourcery.com>
5163 * tracepoint.c (disconnect_or_stop_tracing): Get out of tfind mode.
5165 2010-03-26 Tom Tromey <tromey@redhat.com>
5167 * breakpoint.c (commands_command_1): Duplicate 'arg'.
5169 2010-03-26 Ulrich Weigand <uweigand@de.ibm.com>
5171 * breakpoint.c (expand_line_sal_maybe): Always call skip_prologue_sal.
5172 (skip_prologue_sal): Remove local definition.
5173 (resolve_sal_pc): Remove now unnecessary code.
5174 * linespec.c (minsym_found): Call skip_prologue_sal.
5175 * symtab.c (find_function_start_pc): Remove.
5176 (find_function_start_sal): Extract prologue skipping into ...
5177 (skip_prologue_sal): ... this new function. Handle code both
5178 with and without debug info. Respect SAL's explicit_pc and
5179 explicit_line flags. Inline old find_function_start_pc.
5180 * symtab.h (find_function_start_pc): Remove.
5181 (skip_prologue_sal): Add prototype.
5183 2010-03-26 Ulrich Weigand <uweigand@de.ibm.com>
5185 * dwarf2read.c (read_func_scope): Also scan specification DIEs
5186 for DW_TAG_imported_module children.
5188 2010-03-26 Ulrich Weigand <uweigand@de.ibm.com>
5190 * dwarf2read.c (dwarf2_name): Work around GCC bugzilla debug/41828 by
5191 ignoring spurious DW_AT_name attributes for unnamed structs or unions.
5192 * completer.c (add_struct_fields): Fix inverted logic.
5194 2010-03-26 Ulrich Weigand <uweigand@de.ibm.com>
5196 * breakpoint.c (bpstat_clear_actions): Reset bs->commands_left.
5198 2010-03-26 Pedro Alves <pedro@codesourcery.com>
5200 * tracepoint.c (current_trace_status): Don't make sure error_desc
5202 (parse_trace_status): Release a previous error_desc string, and
5203 set it to NULL by default. If stop reason is tracepoint_error,
5204 make sure error_desc is not left NULL.
5206 2010-03-26 Pedro Alves <pedro@codesourcery.com>
5208 * tracepoint.c (trace_save): Remove X from tracepoint error
5211 2010-03-26 Pedro Alves <pedro@codesourcery.com>
5213 * tracepoint.c (parse_trace_status): Don't allow plain strings in
5214 the terror description. Don't expect an X prefix.
5216 2010-03-25 Stan Shebs <stan@codesourcery.com>
5218 * tracepoint.h (trace_stop_reason): Add tracepoint_error.
5219 (struct trace_status): New field error_desc.
5220 * tracepoint.c (stop_reason_names): Add terror.
5221 (current_trace_status): Ensure non-NULL error description.
5222 (trace_status_command): Add error report.
5223 (trace_status_mi): Ditto.
5224 (trace_save): Add special case for error description.
5225 (parse_trace_status): Add case for errors.
5227 2010-03-25 Keith Seitz <keiths@redhat.com>
5229 * dwarf2read.c (read_subroutine_type): If the compilation unit
5230 language is Java, mark any formal parameter named "this" as
5231 artificial (GCC/43521).
5232 (dwarf2_name): Add special handling for Java constructors.
5234 2010-03-25 Tom Tromey <tromey@redhat.com>
5236 PR gdb/11327, PR gdb/11328, PR breakpoints/11368:
5237 * infrun.c (handle_inferior_event): Change initialization of
5239 (handle_inferior_event): Change assignment to stop_stack_dummy.
5240 (normal_stop): Update use of stop_stack_dummy.
5241 (struct inferior_status) <stop_stack_dummy>: Change type.
5242 * inferior.h (stop_stack_dummy): Update.
5243 * infcmd.c (stop_stack_dummy): Change type.
5244 * infcall.c (cleanup_delete_std_terminate_breakpoint): New
5246 (call_function_by_hand): Call set_std_terminate_breakpoint.
5247 Rewrite std::terminate handling.
5248 * breakpoint.h (enum bptype) <bp_std_terminate,
5249 bp_std_terminate_master>: New.
5250 (enum stop_stack_kind): New.
5251 (struct bpstat_what) <call_dummy>: Change type.
5252 (set_std_terminate_breakpoint, delete_std_terminate_breakpoint):
5254 * breakpoint.c (create_std_terminate_master_breakpoint): New
5256 (update_breakpoints_after_exec): Handle bp_std_terminate_master.
5257 Call create_std_terminate_master_breakpoint.
5258 (print_it_typical): Handle new breakpoint kinds.
5259 (bpstat_stop_status): Handle bp_std_terminate_master.
5260 (bpstat_what): Correctly set call_dummy field. Handle
5261 bp_std_terminate_master and bp_std_terminate.
5262 (print_one_breakpoint_location): Update.
5263 (allocate_bp_location): Update.
5264 (set_std_terminate_breakpoint): New function.
5265 (delete_std_terminate_breakpoint): Likewise.
5266 (create_thread_event_breakpoint): Update.
5267 (delete_command): Update.
5268 (breakpoint_re_set_one): Update.
5269 (breakpoint_re_set): Call create_std_terminate_master_breakpoint.
5271 2010-03-25 Jan Kratochvil <jan.kratochvil@redhat.com>
5273 * symfile.c (build_section_addr_info_from_bfd): New.
5274 (build_section_addr_info_from_objfile): Base it on
5275 build_section_addr_info_from_bfd.
5276 (addrs_section_compar, addrs_section_sort): New.
5277 (addr_info_make_relative): New variables my_cleanup, abfd_addrs,
5278 addrs_sorted, abfd_addrs_sorted and addrs_to_abfd_addrs. Build
5279 addrs_to_abfd_addrs. Use it for recalculating ADDRS.
5281 2010-03-24 Michael Snyder <msnyder@localhost.localdomain>
5283 * elfread.c (find_separate_debug_file_by_buildid):
5284 Remove unused local variable.
5286 2010-03-24 Tom Tromey <tromey@redhat.com>
5288 PR breakpoints/9352:
5289 * NEWS: Mention changes to `commands' and `rbreak'.
5290 * symtab.c (do_end_rbreak_breakpoints): New function.
5291 (rbreak_command): Call start_rbreak_breakpoints; arrange to call
5292 end_rbreak_breakpoints.
5293 * breakpoint.c (breakpoint_count, tracepoint_count): Now static.
5294 (set_breakpoint_count): Likewise. Clear last_was_multi.
5295 (multi_start, multi_end, last_was_multi): New globals.
5296 (start_rbreak_breakpoints, end_rbreak_breakpoints): New
5298 (struct commands_info): New
5299 (do_map_commands_command): New function.
5300 (commands_command_1): New function.
5301 (commands_command): Use it.
5302 (commands_from_control_command): Likewise.
5303 (do_delete_breakpoint): New function.
5304 (delete_command): Use it.
5305 (map_breakpoint_numbers): Add 'data' argument. Pass to callback.
5306 (do_map_disable_breakpoint): New function.
5307 (disable_command): Use it.
5308 (do_map_enable_breakpoint): New function.
5309 (enable_command): Use it.
5310 (enable_once_breakpoint): Add argument.
5311 (enable_once_command): Update.
5312 (enable_delete_breakpoint): Add argument.
5313 (enable_delete_command): Update.
5314 (break_command_really): Set last_was_multi when needed.
5315 (check_tracepoint_command): Fix formatting.
5316 (validate_commands_for_breakpoint): New function.
5317 (breakpoint_set_commands): Use it.
5318 (tracepoint_save_command): Update.
5319 * breakpoint.h (start_rbreak_breakpoints, end_rbreak_breakpoints):
5322 2010-03-24 Tom Tromey <tromey@redhat.com>
5324 * breakpoint.h (struct counted_command_line): New struct.
5325 (struct breakpoint) <commands>: Change type.
5326 (struct bpstats) <commands>: Change type.
5327 <commands_left>: New field.
5328 * breakpoint.c (alloc_counted_command_line): New function.
5329 (incref_counted_command_line): Likewise.
5330 (decref_counted_command_line): Likewise.
5331 (do_cleanup_counted_command_line): Likewise.
5332 (make_cleanup_decref_counted_command_line): Likewise.
5333 (breakpoint_set_commands): Use decref_counted_command_line and
5334 alloc_counted_command_line.
5335 (commands_command): Don't error if breakpoint commands are
5337 (commands_from_control_command): Likewise.
5338 (bpstat_free): Update.
5339 (bpstat_copy): Likewise.
5340 (bpstat_clear_actions): Likewise.
5341 (bpstat_do_actions_1): Likewise.
5342 (bpstat_stop_status): Likewise.
5343 (print_one_breakpoint_location): Likewise.
5344 (delete_breakpoint): Likewise.
5345 (bpstat_alloc): Initialize new field.
5346 (tracepoint_save_command): Update.
5347 * tracepoint.c (encode_actions): Update.
5348 (trace_dump_command): Update.
5350 2010-03-24 Daniel Jacobowitz <dan@codesourcery.com>
5352 * dwarf2-frame.c (dwarf2_frame_find_quirks): Use producer_is_realview.
5353 * dwarf2read.c (load_full_comp_unit): Read DW_AT_producer.
5354 (read_structure_type): For RealView, set TYPE_STUB on structures with
5355 no byte size and no children.
5356 (read_subroutine_type): Mark functions as prototyped by default.
5357 * symtab.c (producer_is_realview): New function.
5358 * symtab.h (expand_line_sal): Fix declaration formatting.
5359 (producer_is_realview): Declare.
5361 2010-03-24 Daniel Jacobowitz <dan@codesourcery.com>
5363 * arm-tdep.c (skip_prologue_function): New function.
5364 (submask, bit, bits, sbits, BranchDest): Move higher in the file.
5365 (thumb_analyze_prologue): Document return value. Recognize more
5366 Thumb instructions, skippable calls, and some Thumb-2 instructions.
5368 (arm_skip_prologue): Remove call dummy check. Check the prologue
5369 for non-GNU compilers.
5370 (arm_instruction_changes_pc): New function.
5371 (arm_analyze_prologue): New function, broken out from
5372 arm_scan_prologue. Recognize more ARM instructions and skippable
5373 calls. Update comments. Handle NULL cache. Return the address
5374 of the first unrecognized instruction. Do not skip past other
5375 instructions which change control flow. Add debug output.
5376 (arm_scan_prologue): Use arm_analyze_prologue.
5377 (ARM_PC_32): Delete.
5378 (shifted_reg_val): Simplify ARM_PC_32 check.
5380 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5382 * tracepoint.c (tvariables_info_1): Actually compute
5383 the number of rows in the result.
5385 2010-03-24 Pedro Alves <pedro@codesourcery.com>
5387 * remote.c (crc32): Constify `buf' parameter.
5388 (remote_verify_memory): New, abstracted out from...
5389 (compare_sections_command): ... this. Remove hardcoded target
5391 (init_remote_ops): Install remote_verify_memory.
5392 * target.c (target_verify_memory): New.
5393 * target.h (struct target_ops) <to_verify_memory>: New field.
5394 (target_verify_memory): Declare.
5396 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5398 Implement -trace-save.
5400 * mi-cmds.h (mi_cmds_trace_save): Declare.
5401 * mi-cmds.c (mi_cmds): Register -trace-save.
5402 * mi/mi-main.c (mi_cmd_trace_save): New.
5403 * remote.c (remote_save_trace_data): Take const parameter.
5404 * target.h (struct target_ops::to_save_trace_data): Take
5406 * target.c (update_current_target): Adjust to the above.
5407 * tracepoint.c (trave_save): New, extracted from
5408 (trace_save_command): ...this.
5409 (tfile_trace_find): Remove message that is unnecessary now
5410 that 'tfind' reports found frame.
5411 * tracepoint.h (trace_save): Declare.
5413 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5415 Implement -trace-find.
5417 * mi/mi-cmds.c (mi_cmds): Register -trace-find.
5418 * mi/mi-cmds.h (mi_cmd_trace_find): Declare.
5419 * mi/mi-main.c (mi_cmd_trace_find): New.
5420 * target.h (struct target_ops): Document to_trace_find.
5421 * tracepoint.h (tfind_1): Declare.
5422 * tracepoint.c (finish_tfind_command): Rename to...
5424 * remote.c (remote_trace_find): Return -1 if target say
5425 there's no frame. Improve error diagnostics.
5427 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5429 -trace-define-variable and -trace-list-variables.
5431 * tracepoint.c (create_trace_state_variable): Make
5432 private copy of name, as opposed to assuming the
5433 pointer lives forever.
5434 (tvariables_info_1): New.
5435 (tvariables_info): Use the above.
5436 * tracepoint.h (create_trace_state_variable, tvariables_info_1):
5438 * mi/mi-cmds.c (mi_cmds): Register -trace-define-variable
5439 and -trace-list-variables.
5440 * mi/mi-cmds.h (mi_cmd_trace_define_variable)
5441 (mi_cmd_trace_list_variables): New.
5442 * mi/mi-main.c (mi_cmd_trace_define_variable)
5443 (mi_cmd_trace_list_variables): New.
5445 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5447 Implement -break-passcount.
5449 * mi/mi-cmd-break.c (mi_cmd_break_passcount): New.
5450 * mi/mi-cmds.c (mi_cmds): Register -break-passcount.
5451 * mi/mi-cmds.h (mi_cmd_break_passcount): Declare.
5453 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5455 -trace-start/-trace-end/-trace-status.
5457 * mi/mi-cmds.c (mi_cmds): Register -trace-start, -trace-status
5459 * mi/mi-cmds.h (mi_cmd_trace_start, mi_cmd_trace_status)
5460 (mi_cmd_trace_stop): Declare.
5461 * mi/mi-main.c (mi_cmd_trace_start, mi_cmd_trace_status)
5462 (mi_cmd_trace_stop): New.
5463 * tracepoint.c (start_tracing): New, extracted from...
5464 (trace_start_command): ...this.
5465 (trace_status_mi): New.
5466 * tracepoint.h (struct trace_status): Document
5467 stopping_tracepoint.
5468 (start_tracing, stop_tracing, trace_status_mi): Declare.
5470 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5472 Implement creating tracepoints with -break-insert.
5474 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle -a
5475 to mean that tracepoint should be created.
5477 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5479 * breakpoint.c (check_no_tracepoint_commands): Use
5480 current spelling of 'teval'.
5482 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5484 Unify actions and commands
5486 * defs.h (read_command_lines, read_command_lines_1): New
5487 parameters validator and closure.
5488 * tracepoint.h (struct action_line): Remove.
5489 * breakpoint.h (struct breakpoint): Remove the 'actions'
5491 * defs.h (enum command_control_type): New value
5492 while_stepping_control.
5493 (struct command_line): Add comments.
5494 * breakpoint.c (breakoint_is_tracepoint): New.
5495 (breakpoint_set_commands): For tracepoints,
5496 verify the commands are permissible.
5497 (check_tracepoint_commands): New.
5498 (commands_command): Require that each new line is validated using
5499 check_tracepoint_command, if we set commands for a tracepoint.
5500 (create_tracepoint_from_upload): Likewise.
5501 (print_one_breakpoint_location): Remove the code to print
5502 actions specifically.
5503 (tracepoint_save_command): Relay to print_command_lines.
5504 * cli/cli-script.c (process_next_line): New parameters validator
5505 and closure. Handle 'while-stepping'. Call validator if not null.
5506 (read_command_lines, read_command_lines1): Likewise.
5507 (recurse_read_control_structure): New parameters validator and
5508 closure. Handle while_stepping_control.
5509 (print_command_lines): Handle while-stepping.
5510 (get_command_line, define_command, document_command): Adjust.
5511 * remote.c (remote_download_tracepoint): Adjust.
5512 * tracepoint.c (make_cleanup_free_actions, read_actions)
5513 (free_actions, do_free_actions_cleanup): Remove.
5514 (trace_actions_command): Use read_command_lines.
5515 (validate_actionline): Use error in one place.
5516 (encode_actions_1): New, extracted from...
5517 (encode_actions): ...this. Also use cleanups for exception
5519 (trace_dump_command): Adjust.
5520 * mi/mi-cmd-break (mi_cmd_break_commands): Validate commands if
5523 2010-03-23 Mike Frysinger <vapier@gentoo.org>
5525 * Makefile.in (OPCODES_CFLAGS): Add -I$(OPCODES_SRC)/..
5527 2010-03-22 Stan Shebs <stan@codesourcery.com>
5529 * value.c (value_static_field): Be lazy about the field's value.
5531 2010-03-22 Reid Kleckner <reid@kleckner.net>
5534 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Add
5536 (disable_breakpoints_in_shlibs): Likewise.
5538 2010-03-22 Ulrich Weigand <uweigand@de.ibm.com>
5540 * dwarf2read.c (partial_die_parent_scope): Work around buggy
5541 GCC 4.1 debug info generation (GCC PR c++/28460).
5542 (determine_prefix): Likewise.
5544 2010-03-20 Daniel Jacobowitz <dan@codesourcery.com>
5546 * tui/tui-disasm.c (tui_get_begin_asm_address): Default to
5548 * tui/tui-layout.c (extract_display_start_addr): Likewise.
5550 2010-03-19 Stan Shebs <stan@codesourcery.com>
5552 * ax-gdb.c (gen_fetch): Handle bool.
5553 (gen_usual_unary): Ditto.
5555 (gen_equal): New function.
5556 (gen_less): New function.
5557 (gen_expr_binop_rest): Call them, also return integer type from
5561 2010-03-19 Tom Tromey <tromey@redhat.com>
5563 * jv-lang.c (jv_dynamics_objfile_data_key)
5564 (jv_type_objfile_data_key): New globals.
5565 (class_symtab): Move earlier.
5566 (jv_per_objfile_free): New function.
5567 (get_dynamics_objfile): Call set_objfile_data. Add 'gdbarch'
5569 Remove ancient #if 1.
5570 (add_class_symbol): Remove redundant declaration.
5571 (java_lookup_class): Use alloc_type, not alloc_type_arch.
5572 (java_link_class_type): Mark as static. Update.
5573 (jv_clear_object_type): New function.
5574 (set_java_object_type): Likewise.
5575 (get_java_object_type): Use set_java_object_type.
5576 (is_object_type): Likewise.
5577 (_initialize_java_language): Register new objfile keys.
5578 (get_java_class_symtab): Add 'gdbarch' parameter.
5579 (add_class_symtab_symbol): Update.
5580 (type_from_class): Update.
5582 2010-03-19 Stan Shebs <stan@codesourcery.com>
5584 * ax-general.c (ax_const_l): Fix a sizing bug.
5586 2010-03-18 Joel Brobecker <brobecker@adacore.com>
5590 2010-03-18 Stan Shebs <stan@codesourcery.com>
5591 Pedro Alves <pedro@codesourcery.com>
5593 * target.h (struct target_ops): New method
5594 to_set_circular_trace_buffer.
5595 (target_set_circular_trace_buffer): New macro.
5596 * target.c (update_current_target): Add
5597 to_set_circular_trace_buffer, fix to_set_disconnected_tracing
5599 * remote.c (remote_set_circular_trace_buffer): New function.
5600 (init_remote_ops): Add it to vector.
5601 * tracepoint.h (struct trace_status): New field traceframes_created,
5602 change buffer_size and buffer_free to int.
5603 * tracepoint.c (circular_trace_buffer): New global.
5604 (start_tracing): Send values of disconnected tracing and circular
5605 trace buffer settings.
5606 (set_circular_trace_buffer): New function.
5607 (parse_trace_state): Handle total space and frames created.
5608 (trace_status_command): Display total space and total frames
5610 (trace_save): Write out new status values.
5611 (parse_trace_status): Set traceframe_count, traceframes_created,
5612 buffer_free and buffer_size to -1 by default.
5613 (_initialize_tracepoint): New setshow for circular-trace-buffer.
5614 * NEWS: Mention the circular trace buffer option.
5616 2010-03-18 Tom Tromey <tromey@redhat.com>
5618 * infcmd.c (finish_command_continuation): Wrap print_return_value
5621 2010-03-18 Joel Brobecker <brobecker@adacore.com>
5623 * dwarf2read.c (add_partial_subprogram): Make sure the subprogram
5624 DIE has a name before creating the associated partial symbol.
5625 (read_func_scope): Emit a complaint if the subprogram does not
5626 have a name or when we can't extract the subprogram PC bounds.
5628 2010-03-18 Ulrich Weigand <uweigand@de.ibm.com>
5630 * mi/mi-main.c (mi_cmd_list_thread_groups): Use get_current_arch
5631 instead of selected frame architecture.
5633 2010-03-18 Pedro Alves <pedro@codesourcery.com>
5635 * infcmd.c (until_command): Use ERROR_NO_INFERIOR. Ensure there's
5636 a valid selected thread, and that it is not running.
5637 (advance_command): Ditto.
5638 (finish_command): Ditto.
5640 2010-03-17 Stan Shebs <stan@codesourcery.com>
5642 * ax-gdb.c (require_rvalue): Disallow non-scalars.
5644 * infcall.c: Include tracepoint.h.
5645 (call_function_by_hand): Disallow calls in tfind mode.
5646 * infcmd.c: Include tracepoint.h.
5647 (ensure_not_tfind_mode): New function.
5648 (continue_1): Call it.
5650 (jump_command): Ditto.
5651 (signal_command): Ditto.
5652 (advance_command): Ditto.
5653 (until_command): Ditto.
5654 (finish_command): Ditto.
5655 * tracepoint.h (disconnect_or_stop_tracing): Declare.
5657 * ax-gdb.h (struct axs_value): New field optimized_out.
5658 (gen_trace_for_var): Add gdbarch argument.
5659 * ax-gdb.c (gen_trace_static_fields): New function.
5660 (gen_traced_pop): Call it, add gdbarch argument.
5661 (gen_trace_for_expr): Update call to it.
5662 (gen_trace_for_var): Ditto, and report optimized-out variables.
5663 (gen_struct_ref_recursive): Check for optimized-out value.
5664 (gen_struct_elt_for_reference): Ditto.
5665 (gen_static_field): Pass gdbarch instead of expression, assume
5666 optimization if field not found.
5667 (gen_var_ref): Set the optimized_out flag.
5668 (gen_expr): Error on optimized-out variable.
5669 * tracepoint.c (collect_symbol): Handle struct-valued vars as
5670 expressions, skip optimized-out variables with computed locations.
5671 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Flag instead of
5672 erroring out if location expression missing.
5673 (loclist_tracepoint_var_ref): Don't error out here.
5675 2010-03-17 Tom Tromey <tromey@redhat.com>
5677 * dwarf2read.c (dwarf2_get_section_info): Handle case where no
5678 DWARF data is available.
5680 2010-03-17 Daniel Jacobowitz <dan@codesourcery.com>
5682 * symfile.c (generic_load): Reset breakpoints after loading.
5684 2010-03-17 Tom Tromey <tromey@redhat.com>
5686 * linux-nat.c (linux_nat_detach): Check debug_linux_nat.
5688 2010-03-17 Jan Kratochvil <jan.kratochvil@redhat.com>
5690 * spu-tdep.c (spu_catch_start): Replace set_breakpoint call with the
5691 create_breakpoint call, adjust the parameters.
5693 2010-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
5694 Chandru <chandru@in.ibm.com>
5696 * dwarf2read.c (read_subrange_type): Set TYPE_HIGH_BOUND_UNDEFINED.
5697 * valarith.c (value_subscripted_rvalue): Suppress error if
5698 TYPE_ARRAY_UPPER_BOUND_IS_UNDEFINED.
5700 2010-03-16 Holger Hans Peter Freyther <zecke@selfish.org>
5702 * linux-record.c (record_linux_msghdr): Remove unintended semicolons.
5704 2010-03-16 Joel Brobecker <brobecker@adacore.com>
5706 * ada-tasks.c (task_command_1): Check that the task ptid is valid
5707 before doing the associated thread switch.
5709 2010-03-16 Daniel Jacobowitz <dan@codesourcery.com>
5711 * MAINTAINERS: Update my email address.
5713 2010-03-16 Vladimir Prus <vladimir@codesourcery.com>
5715 Simplify MI breakpoint setting.
5717 * breakpoint.c (break_command_really): Make nonstatic and
5719 (create_breakpoint): ...this. Rename prior function by this name
5721 (create_breakpoint_sal): ...this.
5722 (create_breakpoints): Rename to...
5723 (create_breakpoints_sal): ...this.
5724 (set_breakpoint): Remove.
5725 * breakpoint.h: Adjust to above changes.
5726 * mi/mi-cmd-break.c (mi_cmd_break_insert): Simplify.
5728 2010-03-15 Stan Shebs <stan@codesourcery.com>
5730 * ax-gdb.c: Include cp-support.h.
5731 (find_field): Remove.
5732 (gen_primitive_field): New function.
5733 (gen_struct_ref_recursive): New function.
5734 (gen_struct_ref): Rewrite to call gen_struct_ref_recursive instead
5736 (gen_static_field): New function.
5737 (gen_struct_elt_for_reference): New.
5738 (gen_namespace_elt): New.
5739 (gen_maybe_namespace_elt): New.
5740 (gen_aggregate_elt_ref): New.
5741 (gen_expr): Add OP_SCOPE, display opcode name in error message.
5743 2010-03-15 Tom Tromey <tromey@redhat.com>
5745 * dwarf2read.c (die_needs_namespace): Also return 0 for
5748 2010-03-15 Sami Wagiaalla <swagiaal@redhat.com>
5751 * cp-support.h: Added char *declaration element to using_direct
5753 (cp_add_using): Added char *declaration argument.
5754 (cp_add_using_directive): Ditto.
5755 (cp_lookup_symbol_imports): made extern.
5756 * cp-namespace.c: Updated with the above changes.
5757 * dwarf2read.c (read_import_statement): Ditto.
5758 (read_namespace): Ditto.
5759 (read_import_statement): Support import declarations.
5760 * cp-namespace.c (cp_lookup_symbol_imports): Check for imported
5762 Added support for 'declaration_only' search.
5763 (cp_lookup_symbol_namespace): Attempt to search for the name as
5764 is before consideration of imports.
5765 * symtab.c (lookup_symbol_aux_local): Added a 'declaration_only'
5766 search at every block level search.
5767 Now takes language argument.
5768 (lookup_symbol_aux): Updated.
5770 2010-03-15 Tom Tromey <tromey@redhat.com>
5772 * c-exp.y (name_not_typename): Add 'operator' clause.
5774 2010-03-15 Ralf Corsepius <ralf.corsepius@rtems.org> (tiny change)
5776 * configure.ac: Exit if ${gdb_target_obs}" is not set.
5777 * configure: Regenerate.
5779 2010-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
5781 * symfile.c (addr_info_make_relative): Ignore also missing ".dynbss"
5782 and ".sdynbss". Update the comment.
5784 2010-03-15 Jie Zhang <jie@codesourcery.com>
5786 * MAINTAINERS: Update my email address.
5788 2010-03-14 Daniel Jacobowitz <dan@codesourcery.com>
5790 * gdbtypes.h (TYPE_IS_OPAQUE): Correct HAVE_CPLUS_STRUCT check.
5792 2010-03-14 Daniel Jacobowitz <dan@codesourcery.com>
5794 * charset.c [USE_WIN32API]: Include <windows.h>.
5795 (_initialize_charset): Correct type of w32_host_default_charset.
5797 2010-03-14 Pedro Alves <pedro@codesourcery.com>
5799 * infrun.c (ptid_match): Don't assert that PTID is not a pid ptid.
5801 2010-03-12 Tom Tromey <tromey@redhat.com>
5804 * dwarf2read.c (die_needs_namespace) <DW_TAG_variable>: A variable
5805 in a lexical block does not need a namespace.
5806 (new_symbol) <DW_TAG_variable>: Put extern variables on
5807 list_in_scope in all cases.
5809 2010-03-12 Stan Shebs <stan@codesourcery.com>
5811 * ax-gdb.c (gen_expr): Add shift expressions.
5812 (gen_expr_binop_rest): Ditto.
5814 2010-03-12 Sami Wagiaalla <swagiaal@redhat.com>
5816 * buildsym.c (finish_block): Reset using_directives pointer
5817 after block initialization.
5819 2010-03-12 H.J. Lu <hongjiu.lu@intel.com>
5821 * amd64-tdep.c (amd64_word_names): Replace "sp" with "".
5822 * i386-tdep.c (i386_word_names): Likewise.
5824 2010-03-12 Pedro Alves <pedro@codesourcery.com>
5826 * target.c (memory_xfer_partial): Don't use the stack cache if
5827 inspecting trace frames.
5828 * tracepoint.c (finish_tfind_command): Invalidate the target
5831 2010-03-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5833 * solib-svr4.c (LM_ADDR_CHECK) <info_verbose>: Use printf_unfiltered
5834 for the PIC displacement, print also the displacement value.
5835 (svr4_exec_displacement): Print DISPLACEMENT if INFO_VERBOSE.
5837 2010-03-10 Kevin Buettner <kevinb@redhat.com>
5839 * remote-mips.c (close_ports, mips_initialize_cleanups)
5840 (mips_exit_cleanups, mips_send_command, mips_open, pmon_open)
5841 (ddb_open, lsi_open, mips_remove_breakpoint, mips_remove_watchpoint)
5842 (mips_stopped_by_watchpoint, send_srec, pmon_checkset)
5843 (pmon_make_fastrec, pmon_check_ack, mips_expect_download)
5844 (pmon_check_entry_address, pmon_check_total, pmon_end_download)
5845 (pmon_download, pmon_load_fast, _initialize_remote_mips): Add
5846 comments describing each of these functions.
5847 (mips_enter_debug, mips_exit_debug, common_open)
5848 (mips_signal_from_protocol, pmon_makeb64, pmon_zeroset): Add
5849 blank line after the comment describing the function.
5851 2010-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
5853 * solib-svr4.c (svr4_exec_displacement): Return now success, new
5854 parameter displacementp. Update comment.
5855 (svr4_relocate_main_executable): Return if non-zero SECTION_OFFSETS
5856 element exists. Return if svr4_exec_displacement was not successful.
5859 2010-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
5860 Daniel Jacobowitz <dan@codesourcery.com>
5862 * solib-svr4.c (read_program_header): Support type == -1 to read
5863 all program headers.
5864 (read_program_headers_from_bfd): New function.
5865 (svr4_static_exec_displacement): Remove and move the comment ...
5866 (svr4_exec_displacement): ... here. Remove variable found. New
5867 variable displacement. Check also DYNAMIC. Verify DISPLACEMENT
5868 alignment for ELF targets. Compare target vs. exec_bfd PHDRs for ELF
5869 targets using read_program_headers_from_bfd. Remove the call of
5870 svr4_static_exec_displacement.
5872 2010-03-10 Tom Tromey <tromey@redhat.com>
5874 * dwarf2read.c (struct pubnames_header): Remove.
5875 (_PUBNAMES_HEADER): Remove.
5876 (_ACTUAL_PUBNAMES_HEADER_SIZE): Remove.
5877 (struct aranges_header): Remove.
5878 (_ARANGES_HEADER, _ACTUAL_ARANGES_HEADER_SIZE): Remove.
5879 (struct dwarf2_per_objfile) <pubnames, aranges>: Remove.
5880 (PUBNAMES_SECTION): Remove.
5881 (ARANGES_SECTION): Remove.
5882 (dwarf2_locate_sections): Don't handle pubnames or aranges.
5883 (dwarf2_build_psymtabs): Remove dead code.
5884 (dwarf2_build_psymtabs_easy): Remove.
5886 2010-03-10 Tom Tromey <tromey@redhat.com>
5888 * elfread.c (elf_symfile_read): Don't call
5889 dwarf2_build_frame_info.
5890 * dwarf2read.c (struct dwarf2_section_info) <readin>: New field.
5891 (struct dwarf2_per_objfile) <objfile>: New field.
5892 (dwarf2_has_info): Now idempotent. Set objfile field.
5893 (dwarf2_read_section): Check and set readin field. Call
5895 (dwarf2_build_psymtabs): Don't read all sections.
5896 (read_type_comp_unit_head): Read types section.
5897 (create_debug_types_hash_table): Likewise.
5898 (init_cu_die_reader): Add asserts.
5899 (process_type_comp_unit): Add assert.
5900 (dwarf2_build_psymtabs_hard): Read info section.
5901 (load_partial_comp_unit): Add assert.
5902 (create_all_comp_units): Read info section.
5903 (load_full_comp_unit): Likewise.
5904 (dwarf2_ranges_read): Read ranges section.
5905 (dwarf2_record_block_ranges): Add assert.
5906 (dwarf2_read_abbrevs): Read abbrev section.
5907 (read_indirect_string): Read str section.
5908 (dwarf_decode_line_header): Read line section.
5909 (read_signatured_type_at_offset): Read types section.
5910 (dwarf_decode_macros): Read macinfo section.
5911 (dwarf2_symbol_mark_computed): Read loc section.
5912 * dwarf2-frame.c (dwarf2_frame_find_fde): Call
5913 dwarf2_build_frame_info.
5914 (dwarf2_build_frame_info): Unconditionally set
5915 dwarf2_frame_objfile_data on the objfile.
5916 * configure.ac: Check for posix_madvise.
5917 * config.in, configure: Rebuild.
5919 2010-03-10 Tom Tromey <tromey@redhat.com>
5921 * xcoffread.c (xcoff_start_psymtab): Update.
5922 (xcoff_end_psymtab): Update.
5923 * psymtab.c (allocate_psymtab): Remove dead code.
5924 * psympriv.h (struct partial_symtab) <read_symtab_private>: Now
5926 * mdebugread.c (parse_partial_symbols): Update.
5927 (new_psymtab): Likewise.
5928 * dwarf2read.c (process_psymtab_comp_unit): Update.
5929 (psymtab_to_symtab_1): Update.
5930 * dbxread.c (start_psymtab): Update.
5931 (end_psymtab): Likewise.
5933 2010-03-10 Tom Tromey <tromey@redhat.com>
5935 * xcoffread.c: Include psymtab.h.
5936 (xcoff_sym_fns): Update.
5937 * symtab.h (struct partial_symbol): Remove.
5938 (PSYMBOL_DOMAIN, PSYMBOL_CLASS): Remove.
5939 (struct partial_symtab): Remove.
5940 (PSYMTAB_TO_SYMTAB): Remove.
5941 (lookup_partial_symbol, lookup_partial_symtab, find_pc_psymtab)
5942 (find_pc_sect_psymtab): Remove.
5943 (find_pc_sect_symtab_via_partial): Declare.
5944 (find_pc_psymtab, find_pc_sect_psymbol, psymtab_to_symtab)
5945 (find_main_psymtab): Remove.
5946 (find_main_filename): Declare.
5947 (fixup_psymbol_section): Remove.
5948 (fixup_section): Declare.
5949 * symtab.c: Include psymtab.h.
5950 (lookup_symtab): Use lookup_symtab method.
5951 (lookup_partial_symtab): Remove.
5952 (find_pc_sect_psymtab_closer): Remove.
5953 (find_pc_sect_psymtab): Remove.
5954 (find_pc_sect_symtab_via_partial): New function.
5955 (find_pc_psymtab, find_pc_sect_psymbol, find_pc_psymbol): Remove.
5956 (fixup_section): No longer static.
5957 (fixup_psymbol_section): Remove.
5958 (lookup_symbol_aux): Use lookup_symbol_aux_quick.
5959 (lookup_global_symbol_from_objfile): Likewise.
5960 (lookup_symbol_aux_psymtabs): Remove.
5961 (lookup_symbol_aux_quick): New function.
5962 (lookup_symbol_global): Use lookup_symbol_aux_quick.
5963 (lookup_partial_symbol): Remove.
5964 (basic_lookup_transparent_type_quick): New function.
5965 (basic_lookup_transparent_type): Use it.
5966 (find_main_psymtab): Remove.
5967 (find_main_filename): New function.
5968 (find_pc_sect_symtab): Use find_pc_sect_symtab method.
5969 (find_line_symtab): Use expand_symtabs_with_filename method.
5970 (output_partial_symbol_filename): New function.
5971 (sources_info): Use map_partial_symbol_filenames.
5972 (struct search_symbols_data): New type.
5973 (search_symbols_file_matches): New function.
5974 (search_symbols_name_matches): Likewise.
5975 (search_symbols): Use expand_symtabs_matching method.
5976 (struct add_name_data): Rename from add_macro_name_data.
5977 (add_macro_name): Update.
5978 (add_partial_symbol_name): New function.
5979 (default_make_symbol_completion_list): Use
5980 map_partial_symbol_names.
5981 (struct add_partial_symbol_name): New type.
5982 (maybe_add_partial_symtab_filename): New function.
5983 (make_source_files_completion_list): Use
5984 map_partial_symbol_filenames.
5985 (expand_line_sal): Use expand_symtabs_with_filename method.
5986 * symmisc.c: Include psymtab.h.
5987 (print_objfile_statistics): Use print_stats method.
5988 (dump_objfile): Use dump method.
5989 (dump_psymtab, maintenance_print_psymbols)
5990 (maintenance_info_psymtabs, maintenance_check_symtabs)
5991 (extend_psymbol_list): Remove.
5992 * symfile.h (struct quick_symbol_functions): New struct.
5993 (struct sym_fns) <qf>: New field.
5994 (sort_pst_symbols): Remove.
5995 (increment_reading_symtab): Declare.
5996 * symfile.c: Include psymtab.h.
5997 (compare_psymbols, sort_pst_symbols): Remove.
5998 (psymtab_to_symtab): Remove.
5999 (increment_reading_symtab): New function.
6000 (symbol_file_add_with_addrs_or_offsets): Use expand_all_symtabs
6002 (set_initial_language): Use find_main_filename.
6003 (allocate_psymtab, discard_psymtab, cashier_psymtab): Remove.
6004 (free_named_symtabs): Remove unused code.
6005 (start_psymtab_common, add_psymbol_to_bcache)
6006 (append_psymbol_to_list, add_psymbol_to_list, init_psymbol_list):
6008 * stack.c: Include psymtab.h, symfile.h.
6009 (backtrace_command_1): Use find_pc_sect_symtab_via_partial.
6010 * source.h (psymtab_to_fullname): Don't declare.
6011 * source.c: Include psymtab.h.
6012 (select_source_symtab): Use find_last_source_symtab method.
6013 (forget_cached_source_info): Use forget_cached_source_info
6015 (find_and_open_source): No longer static.
6016 (psymtab_to_fullname): Remove.
6017 * somread.c: Include psymtab.h.
6018 (som_sym_fns): Update.
6019 * psympriv.h: New file.
6020 * psymtab.h: New file.
6021 * psymtab.c: New file.
6022 * objfiles.h: (ALL_OBJFILE_PSYMTABS): Remove.
6023 (ALL_PSYMTABS, ALL_PSPACE_PSYMTABS): Likewise.
6024 * objfiles.c: Include psymtab.h.
6025 (objfile_relocate1): Use relocate method.
6026 (objfile_has_partial_symbols): Use has_symbols method.
6027 * mipsread.c: Include psymtab.h.
6028 (ecoff_sym_fns): Update.
6029 * mi/mi-cmd-file.c: Include psymtab.h.
6030 (print_partial_file_name): New function.
6031 (mi_cmd_file_list_exec_source_files): Use
6032 map_partial_symbol_filenames.
6033 * mdebugread.c: Include psympriv.h.
6034 * machoread.c: Include psympriv.h.
6035 (macho_sym_fns): Update.
6036 * m2-exp.y (yylex): Use lookup_symtab.
6037 * elfread.c: Include psympriv.h.
6038 (elf_sym_fns): Update.
6039 * dwarf2read.c: Include psympriv.h.
6040 * dbxread.c: Include psympriv.h.
6041 (aout_sym_fns): Update.
6042 * cp-support.c: Include psymtab.h.
6043 (read_in_psymtabs): Remove.
6044 (make_symbol_overload_list_qualified): Use
6045 expand_symtabs_for_function method.
6046 * coffread.c: Include psympriv.h.
6047 (coff_sym_fns): Update.
6048 * blockframe.c: Include psymtab.h.
6049 (find_pc_partial_function): Use find_pc_sect_symtab method.
6050 * ada-lang.h (ada_update_initial_language): Update.
6051 * ada-lang.c: Include psymtab.h.
6052 (ada_update_initial_language): Remove 'main_pst' argument.
6053 (ada_lookup_partial_symbol): Remove.
6054 (struct ada_psym_data): New type.
6055 (ada_add_psyms): New function.
6056 (ada_add_non_local_symbols): Use map_ada_symtabs method.
6057 (struct add_partial_datum): New type.
6058 (ada_add_partial_symbol_completions): New function.
6059 (ada_make_symbol_completion_list): Use map_partial_symbol_names.
6060 (ada_exception_support_info_sniffer): Update.
6061 * Makefile.in (SFILES): Add psymtab.c.
6062 (COMMON_OBS): Add psymtab.o.
6063 (HFILES_NO_SRCDIR): Add psymtab.h, psympriv.h.
6065 2010-03-10 Pierre Muller <muller@ics.u-strasbg.fr>
6067 * remote-fileio.c (cygwin_conv_path): Define macro for old cygwin API.
6069 2010-03-10 Sami Wagiaalla <swagiaal@redhat.com>
6072 * cp-namespace.c (cp_add_using): Deleted.
6073 (cp_add_using_directive): Use obstack allocations.
6074 Merged the function cp_add_using into this one.
6075 Added 'struct obstack *' argument.
6076 (cp_scan_for_anonymous_namespaces): Updated.
6077 * cp-support.h: Updated.
6078 * dwarf2read.c (read_import_statement): Updated.
6079 (read_namespace): Updated.
6081 2010-03-10 Pierre Muller <muller@ics.u-strasbg.fr>
6083 * windows-nat.c (cygwin_conv_path): Remove old macro.
6085 2010-03-10 Pedro Alves <pedro@codesourcery.com>
6087 * breakpoint.c (condition_command): Handle watchpoint conditions.
6088 (is_hardware_watchpoint): Add comment.
6089 (is_watchpoint): New.
6090 (update_watchpoint): Don't reparse the watchpoint's condition
6093 (watchpoint_check): Use it.
6094 (bpstat_check_watchpoint): Handle it.
6095 (bpstat_check_breakpoint_conditions): Evaluate watchpoint local
6096 conditions in a frame where it makes sense.
6097 (watch_command_1): Store the innermost block of the condition
6099 (delete_breakpoint): Delete the watchpoint condition expression.
6100 * breakpoint.h (struct bp_location) <cond>: Update comment.
6101 (struct breakpoint): New field `cond_exp_valid_block'.
6103 2010-03-09 Joel Brobecker <brobecker@adacore.com>
6105 Adjust handling of Ada DIEs after dwarf2_physname patch.
6106 * dwarf2read.c (dwarf2_compute_name): Add handling of Ada DIEs.
6108 2010-03-09 Christopher Faylor <me+cygwin@cgf.cx>
6109 Pierre Muller <muller@ics.u-strasbg.fr>
6111 * windows-nat.c (cygwin_conv_path): Redefine to properly convert
6112 from/to posix/win32.
6113 (windows_make_so): Use non-Cygwin 1.7 specific function.
6114 (windows_create_inferior): Make sure that cygallargs points to
6115 original args in non Cygwin 1.7. case.
6117 2010-03-09 Michael Snyder <msnyder@vmware.com>
6119 * i386-tdep.c (i386_record_lea_modrm_addr): Use extract_signed_int
6120 after target_read_memory to get host byte order.
6121 (i386_process_record): Ditto.
6123 2010-03-09 Keith Seitz <keiths@redhat.com>
6125 Based on work from Daniel Jacobowitz <dan@codesourcery.com>
6126 * c-typeprint.c (cp_type_print_method_args): For non-static methods,
6127 print out const or volatile qualifiers, too.
6128 (c_type_print_args): Add parameters show_artificial and language.
6129 Skip artificial parameters when requested.
6130 Use the appropriate language printer.
6131 (c_type_print_varspec): Tell c_type_print_args to skip artificial
6132 parameters and pass language_c.
6133 * dwarf2read.c (die_list): New file global.
6134 (struct partial_die_info): Update comments for name field.
6135 (pdi_needs_namespace): Renamed to ...
6136 (die_needs_namespace): ... this. Rewrite.
6137 (dwarf2_linkage_name): Remove.
6138 (add_partial_symbol): Do not predicate the call to
6139 partial_die_full_name based on pdi_needs_namespace.
6140 Remove call to cp_check_possible_namespace_symbols and associated
6142 (guess_structure_name): Do not inspect child subprogram DIEs.
6143 (dwarf2_fullname): Update comments.
6144 Use die_needs_namespace to assist in computing the name.
6145 (read_func_scope): Use dwarf2_name to get the DIE's name.
6146 Use dwarf2_physname to get the "linkage name" of the DIE.
6147 (dwarf2_add_member_field): Use dwarf2_physname instead of
6148 dwarf2_linkage_name.
6149 (read_structure_type): For structs and classes, set TYPE_NAME, too.
6150 (determine_class): Remove.
6151 (read_partial_die): Ignore DW_AT_MIPS_linkage_name for all languages
6153 (new_symbol): Unconditionally call dwarf2_name.
6154 Compute the "linkage name" using dwarf2_physname.
6155 Use dwarf2_name instead of dwarf2_full_name for enumerator DIEs.
6156 When determining to scan for anonymous C++ namespaces, ignore
6158 (dwarf2_physname): New function.
6159 (dwarf2_full_name): Move content to new function and call
6161 (dwarf2_compute_name): "New" function.
6162 (_initialize_dwarf2_read): Initialize die_list.
6163 * gnu-v3-eabi.c (gnu_v3_find_method_in): Remove unused variable
6165 (gnu_v3_print_method_ptr): Use the physname for virtual methods
6166 without a demangled name.
6167 Print out type information for non-virtual methods.
6168 * linespec.c (decode_line_1): Force ANY string using "::" (or
6169 "." for java) to use decode_compound, and clean up any stray quoting.
6170 If we found a file symtab, re-evaluate whether the remainder is_quoted.
6171 (decode_compound): Stop consuming at an open parenthesis.
6172 Keep template parameters.
6173 Keep any overload information.
6174 Keep keywords like "const".
6175 Remove paren_pointer.
6176 Move is_quoted check from set_flags to here.
6177 Remove #if 0 code from 2000. Ten years is long enough.
6178 (find_method): Before comparing symbol names, canonicalize the string
6180 If a specific overload is requested, find it. Otherwise throw an error.
6181 (find_method_overload_end): New function.
6182 (set_flags): Remove.
6183 (decode_compound): Assume that parentheses are matched.
6185 * symtab.c (symbol_find_demangled_name): Add DMGL_VERBOSE flag
6187 * linespec.c (decode_line_1): Keep important keywords like
6188 "const" and "volatile".
6189 * symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): Remove.
6190 * typeprint.h (c_type_print_args): Add declaration.
6191 * ui-file.c (do_ui_file_obsavestring): New function.
6192 (ui_file_obsavestring): New function.
6193 * ui-file.h (ui_file_obsavestring): Add declaration.
6194 * valops.c (find_overload_match): Resolve the object to
6196 If the object is a data member, search the object for the member
6197 and return with staticp set.
6198 Use SYMBOL_NATURAL_NAME instead of SYMBOL_CPLUS_DEMANGLED_NAME.
6199 Do not attempt to extract a function name from non-function types.
6200 If the extracted function name and the original name are the same,
6201 we don't have a C++ method.
6203 From Jan Kratochvil <jan.kratochvil@redhat.com>:
6204 * dwarf2read.c (new_symbol <DW_TAG_enumerator>): Call dwarf2_full_name.
6206 * ada-lang.c (ada_lookup_symbol): Remove linkage_name parameters
6207 and arguments from symbol lookups.
6208 * ax-gdb.c (gen_expr): Likewise.
6209 * cp-namespace.c (cp_lookup_symbol_nonlocal, lookup_namespace_scope,
6210 cp_lookup_symbol_namespace, lookup_symbol_file, lookup_nested_type,
6211 lookup_possible_namespace_symbol): Likewise.
6212 * cp-support.c (read_in_psymtabs): Likewise.
6213 * cp-support.h (cp_lookup_symbol_nonlocal): Likewise.
6214 * language.h (la_lookup_symbol_nonlocal): Likewise.
6215 * scm-valprint.c (scm_inferior_print): Likewise.
6216 * solib-darwin.c (darwin_relocate_section_addresses): Likewise.
6217 * solib-svr.c (elf_lookup_lib): Likewise.
6218 * solib.c (show_auto_solib_add): Likewise.
6219 * solist.h (lookup_lib_global, solib_global_lookup): Likewise.
6220 * symmisc.c (maintenance_check_symtabs): Likewise.
6221 * symtab.c (lookup_symbol_in_language, lookup_symbol_aux,
6222 lookup_symbol_aux_local, lookup_symbol_aux_block,
6223 lookup_symbol_from_objfile, lookup_symbol_aux_symtabs,
6224 lookup_symbol_aux_psymtabs,basic_lookup_symbol_nonlocal,
6225 lookup_symbol_static, lookup_symbol_global, symbol_matches_domain,
6226 basic_lookup_transparent_type, find_main_psymtab,
6227 lookup_block_symbol): Likewise.
6228 * symtab.h (basic_lookp_symbol_nonlocal, lookup_symbol_static,
6229 lookup_symbol_global, lookup_symbol_aux_block,
6230 lookup_symbol_partial_symbol, lookup_block_symbol,
6231 lookup_global_symbol, value_maybe_namespace_elt): Likewise.
6233 2010-03-09 Pierre Muller <muller@ics.u-strasbg.fr>
6235 * python/python-internal.h: Include symtab.h.
6237 2010-03-09 Joel Brobecker <brobecker@adacore.com>
6238 Pierre Muller <muller@ics.u-strasbg.fr>
6240 * p-lang.c (is_pascal_string_type): Remove unneeded parentheses.
6241 * p-valprint.c (pascal_val_print): Remove undeed block and fix
6244 2010-03-08 Tom Tromey <tromey@redhat.com>
6246 * breakpoint.c (breakpoint_1): Add "QUIT".
6248 2010-03-08 Daniel Jacobowitz <dan@codesourcery.com>
6249 Pedro Alves <pedro@codesourcery.com>
6251 * solib.c (solib_find): Replace extension if
6252 solib_symbols_extension is set in the target gdbarch.
6253 * arm-symbian-tdep.c (arm_symbian_init_abi): Set
6254 solib_symbols_extension to "sym".
6255 * gdbarch.sh (solib_symbols_extension): New variable.
6256 (pstring): New function.
6257 * gdbarch.h, gdbarch.c: Regenerate.
6259 2010-03-08 Tom Tromey <tromey@redhat.com>
6263 * utils.c: Include main.h.
6264 (fputs_maybe_filtered): Don't paginate if `batch_flag'.
6265 (defaulted_query): Use default answer if `batch_flag'.
6266 * main.h (batch_flag): Declare.
6267 * main.c (batch_flag): New global.
6268 (captured_main): Remove 'batch'. Update.
6270 2010-03-08 Kevin Buettner <kevinb@redhat.com>
6272 From Richard Sandiford, Martin M. Hunt, Corinna Vinschen,
6275 * remote-mips.c (rockhopper_ops): New target_ops struct.
6276 (MON_ROCKHOPPER): New mips_monitor_type.
6277 (read_hex_value): New function.
6278 (mips_request): Send 8-byte values with a 'T' packet. Read the
6279 packet argument as a string and use read_hex_value to parse it.
6280 (mips_exit_debug): Wait for response when using MON_ROCKHOPPER.
6281 (rockhopper_open): New function.
6282 (mips_wait): Read the PC, FP and SP fields as strings. Use
6283 read_hex_value to parse them and mips_set_register to commit them.
6284 (mips_set_register): New function.
6285 (mips_fetch_registers): Do not cast register value to "unsigned"
6286 when reading a MON_ROCKHOPPER 't' packet. Use mips_set_register.
6287 (mips_store_registers): Use a 'T' packet to set registers when
6288 using MON_ROCKHOPPER.
6289 (pmon_end_download): Don't run initEther if using MON_ROCKHOPPER
6290 and expect the total to be printed before the entry address.
6291 (_initialize_remote_mips): Initialize and add rockhopper_ops.
6293 2010-03-08 Kevin Buettner <kevinb@redhat.com>
6295 * remote-mips.c (mips_fetch_word): Add new parameter, `valp'.
6296 Change return value to int. Store value fetched in location
6297 addressed by `val'. Use function's return value as success
6298 or failure indicator. Adjust all callers.
6300 2010-03-08 Pierre Muller <muller@ics.u-strasbg.fr>
6302 * p-lang.c (is_pascal_string_type): Check that TYPE arg is non NULL.
6304 2010-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
6305 Hui Zhu <teawater@gmail.com>
6307 * record.c (record_open_1): Check tmp_to_stopped_by_watchpoint and
6308 tmp_to_stopped_data_address.
6309 (record_open): Reset tmp_to_stopped_by_watchpoint and
6310 tmp_to_stopped_data_address.
6311 * target.c (init_dummy_target): Add to_stopped_by_watchpoint and
6312 to_stopped_data_address.
6314 2010-03-08 Hui Zhu <teawater@gmail.com>
6316 * i386-tdep.c (i386_process_record): Initialize regnum.
6318 2010-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
6320 * symfile.c (addr_info_make_relative): New variable sect_name, use it.
6321 Do not warn on ".gnu.liblist" and ".gnu.conflict".
6323 2010-03-08 Joel Brobecker <brobecker@adacore.com>
6325 Memory error when reading wrong core file.
6326 * solib-svr4.c (solib_svr4_r_map): catch and print all exception
6327 errors while reading the inferior memory, and return zero if
6328 an exception was raised.
6330 2010-03-07 Michael Snyder <msnyder@vmware.com>
6332 * record.c (record_restore): Rename tmpu8 to rectype.
6334 * i386-tdep.c (i386_record_lea_modrm_addr): Rename local variables
6335 tmpu8, tmpi16, tmpi32, tmpulongest to addr8, addr16, addr32, addr64.
6337 (i386_record_push): Rename local tmpulongest to addr.
6339 (i386_process_record): Rename local tmpulongest to addr.
6341 Rename local variables tmpu16, tmpu32, tmpu64 to addr16, addr32,
6344 Rename local variable tmpu8 to opcode8 and regnum.
6346 2010-03-07 Joel Brobecker <brobecker@adacore.com>
6348 * remote.c (remote_get_ada_task_ptid): New function.
6349 (init_remote_ops): Set remote_ops.to_get_ada_task_ptid.
6351 2010-03-06 Christopher Faylor <me+cygwin@cgf.cx>
6353 * windows-nat.c: Reorganize #ifdef __CYGWIN__ considerations into one
6354 block. Define helper macros to reduce ifdefs in code.
6355 (get_module_name): Use cygwin_buf_t for buffer and __PMAX for buffer
6356 size. Call unadorned GetModuleFileNameEx rather than
6357 GetModuleFileNameEx*.
6358 (windows_make_so): Use __PMAX to denote maximum buffer size and
6359 cygwin_buf_t for buffer type. Use GetSystemDirectory{W,A} as
6361 (get_image_name): Use __PMAX to denote maximum buffer size.
6362 (handle_load_dll): Likewise.
6363 (windows_pid_to_exec_file): Likewise.
6364 (windows_create_inferior): Add many accommodations for older Cygwin and
6366 (bad_GetModuleFileNameExW): Control inclusion of this function based on
6367 __USEWIDE conditional.
6368 (bad_GetModuleFileNameExA): Likewise.
6369 (_initialize_loadable): Just use real function names without the dyn_
6370 part since they are defined earlier.
6372 2010-03-05 Corinna Vinschen <vinschen@redhat.com>
6373 Tom Tromey <tromey@redhat.com>
6375 * utils.c (host_char_to_target): Add 'gdbarch' argument.
6376 (parse_escape): Likewise.
6377 * python/py-utils.c (unicode_to_target_string): Update.
6378 (unicode_to_target_python_string): Update.
6379 (target_string_to_unicode): Update.
6380 * printcmd.c (printf_command): Update.
6381 * p-exp.y (yylex): Update.
6382 * objc-exp.y (yylex): Update.
6383 * mi/mi-parse.c: Include charset.h.
6384 (mi_parse_escape): New function.
6385 (mi_parse_argv): Use it.
6386 * jv-exp.y (yylex): Update.
6387 * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New
6389 (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset.
6390 * gdbarch.sh (auto_charset, auto_wide_charset): New.
6391 * gdbarch.c: Rebuild.
6392 * gdbarch.h: Rebuild.
6393 * defs.h (parse_escape): Update.
6394 * cli/cli-setshow.c: Include arch-utils.h.
6395 (do_setshow_command): Update.
6396 * cli/cli-cmds.c (echo_command): Update.
6397 * charset.h (target_charset, target_wide_charset): Update.
6398 * charset.c: Include arch-utils.h.
6399 (target_charset_name): Default to "auto".
6400 (target_wide_charset_name): Likewise.
6401 (show_target_charset_name): Handle "auto".
6402 (show_target_wide_charset_name): Likewise.
6403 (be_le_arch): New global.
6404 (set_be_le_names): Add 'gdbarch' argument.
6405 (validate): Likewise. Don't call set_be_le_names.
6406 (set_charset_sfunc, set_host_charset_sfunc)
6407 (set_target_charset_sfunc, set_target_wide_charset_sfunc):
6409 (target_charset): Add 'gdbarch' argument.
6410 (target_wide_charset): Likewise. Remove 'byte_order' argument.
6411 (auto_target_charset_name): New global.
6412 (default_auto_charset, default_auto_wide_charset): New functions.
6413 (_initialize_charset): Set auto_target_charset_name. Allow "auto"
6414 for target charsets. Copy result of nl_langinfo. Use GetACP if
6416 * c-lang.c (charset_for_string_type): Add 'gdbarch' argument,
6417 remove 'byte_order' argument. Update.
6418 (classify_type): Likewise.
6419 (c_emit_char): Update.
6420 (c_printchar): Update.
6421 (c_printstr): Update.
6422 (c_get_string): Update.
6423 (evaluate_subexp_c): Update.
6424 * arch-utils.h (default_auto_charset, default_auto_wide_charset):
6426 * python/python.c (gdbpy_target_charset): New function.
6427 (gdbpy_target_wide_charset): Likewise.
6428 (GdbMethods): Update.
6431 2010-03-05 Ulrich Weigand <uweigand@de.ibm.com>
6433 * symfile.c (build_section_addr_info_from_objfile): Do not mask
6434 off high address bits.
6436 2010-03-05 Ulrich Weigand <uweigand@de.ibm.com>
6438 * python/py-lazy-string.c (gdbpy_extract_lazy_string): Extract
6439 address as UnsignedLongLong, not LongLong.
6441 2010-03-05 Kevin Buettner <kevinb@redhat.com>
6442 Pedro Alves <pedro@codesourcery.com>
6444 * remote-mips.c (gdbthread.h): Include.
6445 (remote_mips_ptid): Declare.
6446 (mips_error): Only mourn the inferior when inferior_ptid is non-null.
6447 (common_open): Set inferior_ptid, add it as an inferior, and
6448 as a thread too. Delete FIXME comment regarding start_remote().
6449 (mips_close): Invoke generic_mourn_inferior().
6450 (mips_kill): Make sure that target_mourn_inferior is invoked.
6451 (mips_mourn_inferior): Don't invoke generic_mourn_inferior, as
6452 it's now invoked from mips_close().
6453 (mips_load): Don't null out inferior_ptid. Don't call
6454 clear_symtab_users().
6455 (mips_thread_alive, mips_pid_to_str): New functions.
6456 (_initialize_remote_mips): Initialize remote_mips_ptid. Initialize
6457 to_thread_alive and to_pid_to_str operations.
6459 2010-03-04 Tom Tromey <tromey@redhat.com>
6461 * dwarf2read.c (skip_one_die) <DW_FORM_ref_addr>: Use offset size
6462 in DWARF 3 and later.
6463 (read_attribute_value) <DW_FORM_ref_addr>: Likewise.
6465 2010-03-04 Keith Seitz <keiths@redhat.com>
6467 * linespec.c (decode_line_1): Update comments for is_quote_enclosed.
6468 If the filename portion of the linespec was quoted, recheck the
6469 remainder for additional quoting.
6470 (locate_first_half): Skip over completer chars, too.
6472 2010-03-04 Tom Tromey <tromey@redhat.com>
6474 * printcmd.c (printf_command): Pass dummy argument to
6477 2010-03-04 Doug Evans <dje@google.com>
6479 * arm-tdep.c (arm_make_stub_cache): Delete unused locals reg,
6482 * arm-tdep.c (arm_stub_unwind_sniffer): Add comment.
6484 2010-03-04 Pedro Alves <pedro@codesourcery.com>
6486 * breakpoint.c (update_watchpoint): Create a sentinel location if
6487 the software watchpoint isn't watching any memory.
6488 (breakpoint_address_bits): Skip dummy software watchpoint locations.
6490 2010-03-04 Pedro Alves <pedro@codesourcery.com>
6492 * utils.c (fputs_maybe_filtered): Check if there's already a top
6493 level interpreter before dereferencing it. If there isn't one,
6494 don't paginate either.
6496 2010-03-04 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
6498 * arm-tdep.c (arm_pc_is_thumb): Add heuristic that tries to get
6499 the state right when single stepping.
6500 (arm_get_next_pc_raw, thumb_get_next_pc_raw): New functions.
6501 Get the next PC along with the instruction state.
6502 (thumb_get_next_pc): Remove.
6503 (arm_get_next_pc): Modified to use arm_get_next_pc_raw.
6505 2010-03-04 Hui Zhu <teawater@gmail.com>
6507 * i386-tdep.c (i386_process_record): Change "addr" to "tmpu64".
6509 2010-03-03 Pedro Alves <pedro@codesourcery.com>
6511 * utils.c (fputs_maybe_filtered): Always disable pagination if the
6512 top level interpreter is MI.
6514 2010-03-03 Stan Shebs <stan@codesourcery.com>
6516 * remote.c (remote_download_tracepoint): Iterate over locations.
6517 * tracepoint.c (validate_actionline): Ditto.
6518 (encode_actions): Add location argument.
6519 (trace_dump_command): Check all locations to see if stepping
6522 2010-03-03 H.J. Lu <hongjiu.lu@intel.com>
6523 Eli Zaretskii <eliz@gnu.org>
6525 * NEWS: Add X86 general purpose registers section.
6527 2010-03-03 Tom Tromey <tromey@redhat.com>
6530 * varobj.c (install_new_value): Handle case where new print_value
6533 2010-03-03 Dainis Jonitis <jonitis@gmail.com>
6536 * printcmd.c (printf_command): Print end of format string using
6539 2010-03-02 Tom Tromey <tromey@redhat.com>
6541 * mi/mi-cmd-break.c (mi_read_next_line): Add missing 'void'.
6542 * defs.h (read_command_lines_1): Add missing 'void'.
6543 * cli/cli-script.c (recurse_read_control_structure): Add missing
6545 (read_next_line): Likewise.
6546 (read_command_lines_1): Likewise.
6548 2010-03-02 Ulrich Weigand <uweigand@de.ibm.com>
6550 * spu-tdep.c (spu_analyze_prologue): Track instruction to
6551 store backchain as part of prologue.
6553 2010-03-02 Daniel Jacobowitz <dan@codesourcery.com>
6555 * progspace.c (update_address_spaces): Update inferior address spaces
6558 2010-03-02 Doug Evans <dje@google.com>
6560 * dwarf2read.c (add_partial_subprogram): Add missing baseaddr to
6561 lowpc,highpc args to addrmap_set_empty.
6563 2010-03-02 H.J. Lu <hongjiu.lu@intel.com>
6565 * amd64-tdep.c (amd64_byte_names): New.
6566 (amd64_word_names): Likewise.
6567 (amd64_dword_names): Likewise.
6568 (amd64_pseudo_register_name): Likewise.
6569 (amd64_pseudo_register_read): Likewise.
6570 (amd64_pseudo_register_write): Likewise.
6571 (amd64_init_abi): Set num_byte_regs, num_word_regs, num_dword_regs
6572 and num_mmx_regs. Call set_gdbarch_pseudo_register_read,
6573 set_gdbarch_pseudo_register_write and
6574 set_tdesc_pseudo_register_name. Don't call
6575 set_gdbarch_num_pseudo_regs. Don't set mm0_regnum.
6577 * i386-tdep.c (i386_num_mmx_regs): Removed.
6578 (i386_num_pseudo_regs): Likewise.
6579 (i386_byte_names): New.
6580 (i386_word_names): Likewise.
6581 (i386_byte_regnum_p): Likewise.
6582 (i386_word_regnum_p): Likewise.
6583 (i386_mmx_regnum_p): Updated.
6584 (i386_pseudo_register_name): Make it global. Handle byte and
6585 word pseudo-registers.
6586 (i386_pseudo_register_read): Likewise.
6587 (i386_pseudo_register_write): Likewise.
6588 (i386_pseudo_register_type): Handle byte, word and dword
6590 (i386_register_reggroup_p): Don't include pseudo
6591 registers, except for MXX, in any register groups. Don't
6592 include pseudo byte, word, dword registers in general_reggroup.
6593 (i386_gdbarch_init): Set num_byte_regs, num_word_regs,
6594 num_dword_regs, al_regnum, ax_regnum and eax_regnum. Put MMX
6595 pseudo-registers after word pseudo-registers. Call
6596 set_gdbarch_num_pseudo_regs after calling gdbarch_init_osabi.
6598 * i386-tdep.h (gdbarch_tdep): Add num_mmx_regs, num_byte_regs,
6599 al_regnum, num_word_regs, ax_regnum, num_dword_regs and
6601 (i386_byte_regnum_p): New.
6602 (i386_word_regnum_p): Likewise.
6603 (i386_dword_regnum_p): Likewise.
6604 (i386_pseudo_register_name): Likewise.
6605 (i386_pseudo_register_read): Likewise.
6606 (i386_pseudo_register_write): Likewise.
6608 2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
6610 * target-descriptions.c (tdesc_type): Remove
6611 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
6612 (tdesc_predefined_types): Likewise.
6613 (tdesc_gdb_type): Likewise. Pass NULL to append_flags_type_flag
6614 if flag name is empty.
6615 (maint_print_c_tdesc_cmd): Handle TDESC_TYPE_FLAGS.
6617 * features/i386/32bit-core.xml: Define i386_eflags.
6618 * features/i386/64bit-core.xml: Likewise.
6620 * features/i386/32bit-sse.xml: Define i386_mxcsr.
6621 * features/i386/64bit-sse.xml: Likewise.
6623 * features/i386/amd64-linux.c: Regenerated.
6624 * features/i386/amd64.c: Likewise.
6625 * features/i386/i386-linux.c: Likewise.
6626 * features/i386/i386.c: Likewise.
6628 2010-03-01 Daniel Jacobowitz <dan@codesourcery.com>
6630 * gdbtypes.c (append_composite_type_field_raw): New.
6631 (append_composite_type_field_aligned): Use the new function.
6632 * gdbtypes.h (append_composite_type_field_raw): Declare.
6633 * target-descriptions.c (struct tdesc_type_field): Add start and end.
6634 (struct tdesc_type_flag): New type.
6635 (struct tdesc_type): Add TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS to
6636 kind. Add size to u.u. Add u.f for flags.
6637 (tdesc_gdb_type): Handle TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS.
6638 (tdesc_free_type): Likewise.
6639 (tdesc_create_struct, tdesc_set_struct_size, tdesc_create_flags): New.
6640 (tdesc_add_field): Handle TDESC_TYPE_STRUCT.
6641 (tdesc_add_bitfield, tdesc_add_flag): New.
6642 * target-descriptions.h (tdesc_create_struct, tdesc_set_struct_size)
6643 (tdesc_create_flags, tdesc_add_bitfield, tdesc_add_flag): Declare.
6644 * xml-tdesc.c (struct tdesc_parsing_data): Rename current_union to
6645 current_type. Add current_type_size and current_type_is_flags.
6646 (tdesc_start_union): Clear the new fields.
6647 (tdesc_start_struct, tdesc_start_flags): New.
6648 (tdesc_start_field): Handle struct fields, including bitfields.
6649 (field_attributes): Make type optional. Add start and end.
6650 (union_children): Rename to struct_union_children.
6651 (union_attributes): Rename to struct_union_attributes. Add optional
6653 (flags_attributes): New.
6654 (feature_children): Add struct and flags.
6655 * features/gdb-target.dtd: Add flags and struct to features.
6656 Make field type optional. Add field start and end.
6658 2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
6660 * amd64-linux-nat.c (AMD64_LINUX_USER64_CS): New.
6661 (amd64_linux_read_description): Likewise.
6662 (_initialize_amd64_linux_nat): Set to_read_description to
6663 amd64_linux_read_description.
6665 * amd64-linux-tdep.c: Include "features/i386/amd64-linux.c".
6666 (amd64_linux_register_name): Removed.
6667 (amd64_linux_register_type): Likewise.
6668 (amd64_linux_core_read_description): New.
6669 (amd64_linux_init_abi): Set target description to
6670 tdesc_amd64_linux if needed. Support orig_rax in target
6671 description. Don't call set_gdbarch_register_name nor
6672 set_gdbarch_register_type. Call
6673 set_gdbarch_core_read_description.
6674 (_initialize_amd64_linux_tdep): Call
6675 initialize_tdesc_amd64_linux.
6677 * amd64-linux-tdep.h (tdesc_amd64_linux): New.
6679 * amd64-tdep.c: Include "features/i386/amd64.c".
6680 (amd64_register_names): Removed.
6681 (amd64_register_name): Likewise.
6682 (amd64_register_type): Likewise.
6683 (amd64_init_abi): Set num_core_regs and register_names. Set
6684 target description to tdesc_amd64 if needed. Don't call
6685 set_gdbarch_register_name nor set_gdbarch_register_type.
6686 (_initialize_amd64_tdep): New.
6688 * i386-linux-nat.c (i386_linux_read_description): New.
6689 (_initialize_i386_linux_nat): Set to_read_description to
6690 i386_linux_read_description.
6692 * i386-linux-tdep.c: Include "features/i386/i386-linux.c".
6693 (i386_linux_register_name): Removed.
6694 (i386_linux_core_read_description): New.
6695 (i386_linux_read_description): Likewise.
6696 (i386_linux_init_abi): Don't call set_gdbarch_register_name.
6697 Set target description to tdesc_i386_linux if needed. Support
6698 orig_eax. Set register_reggroup_p. Call
6699 set_gdbarch_core_read_description.
6700 (_initialize_i386_linux_tdep): Call initialize_tdesc_i386_linux.
6702 * i386-linux-tdep.h (tdesc_i386_linux): New.
6704 * i386-nto-tdep.c (i386nto_regset_id): Replace I386_NUM_FREGS
6707 * i386-tdep.c: Include "features/i386/i386.c".
6708 (i386_register_names): Make it const.
6709 (i386_mmx_names): Likewise.
6710 (i386_num_register_names): Removed.
6711 (i386_register_name): Likewise.
6712 (i386_eflags_type): Likewise.
6713 (i386_mxcsr_type): Likewise.
6714 (i386_sse_type): Likewise.
6715 (i386_register_type): Likewise.
6716 (i387_ext_type): Call tdesc_find_type instead of arch_float_type.
6717 (i386_pseudo_register_name): New.
6718 (i386_pseudo_register_type): Likewise.
6719 (i386_mmx_type): Make it static.
6720 (i386_gdbarch_init): Check arch. Replace I386_NUM_FREGS with
6721 I387_NUM_REGS. Set num_core_regs and register_names. Don't
6722 call set_gdbarch_register_name nor set_gdbarch_register_type.
6723 Set register_reggroup_p. Set target description to tdesc_i386
6724 if needed. Call set_tdesc_pseudo_register_type,
6725 set_tdesc_pseudo_register_name and tdesc_use_registers.
6726 (_initialize_i386_tdep): Call initialize_tdesc_i386.
6727 initialize_tdesc_x86_64.
6729 * i386-tdep.h (gdbarch_tdep): Remove i386_eflags_type,
6730 i386_mxcsr_type and i386_sse_type. Add num_core_regs,
6731 register_names, tdesc and register_reggroup_p.
6732 (I386_NUM_FREGS): Removed.
6733 (i386_eflags_type): Likewise.
6734 (i386_mxcsr_type): Likewise.
6735 (i386_mmx_type): Likewise.
6736 (i386_sse_type): Likewise.
6737 (i386_register_name): Likewise.
6738 (i386_regnum): Add I386_MXCSR_REGNUM.
6739 (I386_SSE_NUM_REGS): Defined with I386_MXCSR_REGNUM.
6741 * i387-tdep.h (I387_NUM_REGS): New.
6743 * regformats/i386/i386-linux.dat: Generated.
6744 * regformats/i386/i386.dat: Likewise.
6745 * regformats/i386/amd64-linux.dat: Likewise.
6746 * regformats/i386/amd64.dat: Likewise.
6748 * regformats/reg-i386-linux.dat: Removed.
6749 * regformats/reg-i386.dat: Likewise.
6750 * regformats/reg-x86-64-linux.dat: Likewise.
6751 * regformats/reg-x86-64.dat: Likewise.
6753 2010-03-01 Corinna Vinschen <vinschen@redhat.com>
6755 * remote-fileio.c (remote_fileio_func_rename): Use Cygwin 1.7
6756 cygwin_conv_path API rather than the deprecated
6757 cygwin_conv_to_full_posix_path.
6759 (GetModuleFileNameExA): Undefine for Cygwin.
6760 (GetModuleFileNameExW): Define for Cygwin.
6761 (get_module_name): Change size of pathbuf to PATH_MAX for Cygwin.
6762 Call GetModuleFileNameExW and convert path to POSIX using
6764 (windows_make_so): Always define p. Drop unused variable m.
6765 Don't use Win32 functions to check file existance, rather use
6766 access on Cygwin. Fetch system directory using GetSystemDirectoryW.
6767 Use canonicalize_file_name to get full path.
6768 (get_image_name): Use wcstombs, rather than WideCharToMultiByte
6769 to convert Unicode pathname to multibyte on Cygwin. Otherwise,
6770 use correct target buffer size in call to WideCharToMultiByte.
6771 (handle_load_dll): Change size of dll_buf to PATH_MAX for Cygwin.
6772 (windows_pid_to_exec_file): Change size of path to PATH_MAX for Cygwin.
6773 (windows_create_inferior): Convert all paths and arguments to wchar_t
6774 and use CreateProcessW on Cygwin.
6775 (_initialize_windows_nat): Disable DOS-style path warning on Cygwin.
6776 (bad_GetModuleFileNameExA): Undefine for Cygwin.
6777 (bad_GetModuleFileNameExW): Define for Cygwin.
6778 (_initialize_loadable): Load GetModuleFileNameExW into
6779 dyn_GetModuleFileNameExW on Cygwin. Don't load ANSI function on Cygwin.
6781 2010-02-28 Phil Muldoon <pmuldoon@redhat.com>
6784 * python/py-frame.c (frapy_read_var): Add block argument and logic
6785 to cope with user provided blocks.
6787 2010-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
6789 * infcall.c (call_function_by_hand): Remove gdb_assert on sp and old_sp.
6792 2010-02-28 Corinna Vinschen <vinschen@redhat.com>
6794 * Makefile.in (SUBDIR_MI_OBS): Move mi-common.o from here...
6795 (COMMON_OBS): ... to here since it's used unconditionally.
6796 (SUBDIR_MI_SRCS): Move mi/mi-common.c from here...
6799 2010-02-26 David Daney <ddaney@caviumnetworks.com>
6801 * mips-linux-tdep.c: Update struct sigframe comments.
6802 (SIGFRAME_CODE_OFFSET): Delete macro.
6803 (mips_linux_o32_sigframe_init): Calculate sigcontext_base using
6805 (mips_linux_n32n64_sigframe_init): Same.
6807 2010-02-26 Kevin Buettner <kevinb@redhat.com>
6809 * remote-mips.c (mips_load): Don't use pseudo-register when
6810 invalidating regcache.
6812 2010-02-26 Daniel Jacobowitz <dan@codesourcery.com>
6814 * arm-tdep.c (thumb_get_next_pc): Correct conditional branch opcode.
6816 2010-02-26 Pedro Alves <pedro@codesourcery.com>
6818 * NEWS: Add "New targets" section, and mention ARM Symbian
6821 2010-02-26 Ulrich Weigand <uweigand@de.ibm.com>
6823 * dwarf2loc.c (struct piece_closure): Remove ARCH member,
6824 add ADDR_SIZE member.
6825 (allocate_piece_closure): Update.
6826 (copy_pieced_value_closure): Likewise.
6827 (dwarf2_evaluate_loc_desc): Likewise.
6828 (read_pieced_value): Use DWARF address size instead of
6829 GDB's gdbarch_addr_bit as size of values on the DWARF stack.
6831 2010-02-26 Phil Muldoon <pmuldoon@redhat.com>
6832 Tom Tromey <tromey@redhat.com>
6834 * python/py-type.c (typy_lookup_typename): Add in block argument.
6835 If provided restrict lookup to specified blocks.
6836 (gdbpy_lookup_type): Likewise.
6837 (typy_lookup_type): Likewise.
6839 2010-02-25 Daniel Jacobowitz <dan@codesourcery.com>
6844 * arm-symbian-tdep.c: New.
6845 * configure.tgt (arm*-*-symbianelf*): New target.
6846 (*-*-symbianelf*): New OS.
6847 * osabi.c (gdb_osabi_names): Add Symbian.
6848 * defs.h (gdb_osabi): Add GDB_OSABI_SYMBIAN.
6849 * Makefile.in (ALL_TARGET_OBJS): Add arm-symbian-tdep.o.
6850 (ALLDEPFILES): Add arm-symbian-tdep.c.
6852 2010-02-25 Daniel Jacobowitz <dan@codesourcery.com>
6854 * symfile.c (find_lowest_section): Include SEC_ALLOC sections.
6856 2010-02-24 Pedro Alves <pedro@codesourcery.com>
6858 * mi/mi-main.c (mi_cmd_execute): Fix typo.
6860 2010-02-24 Phil Muldoon <pmuldoon@redhat.com>
6861 Tom Tromey <tromey@redhat.com>
6862 Thiago Jung Bauermann <bauerman@br.ibm.com>
6864 * python/python.c (_initialize_python): Call
6865 gdbpy_initialize_symtabs, gdbpy_initialize_symbols and
6866 gdbpy_initialize_blocks.
6867 * python/python-internal.h: Declare struct symbol, block and
6868 symtab_and_line. Declare block_object_type and
6870 (gdbpy_lookup_symbol gdbpy_block_for_pc)
6871 (symtab_and_line_to_sal_object, symtab_to_symtab_object)
6872 (symbol_to_symbol_object, block_to_block_object)
6873 (gdbpy_initialize_symtabs,gdbpy_initialize_symbols)
6874 (gdbpy_initialize_blocks ): Declare.
6875 * python/py-frame.c (frapy_block, frapy_function, frapy_find_sal)
6876 (frapy_select): Add methods.
6877 (frapy_read_var): Add symbol branch.
6878 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-symbol, py-symtab,
6880 (SUBDIR_PYTHON_SRCS): Likewise.
6881 (py-symbol.o): New rule.
6882 (py-symtab.o): Likewise.
6883 (py-block.o): Likewise.
6884 * python/py-symbol.c: New file.
6885 * python/py-symtab.c: Likewise.
6886 * python/py-block.c: Likewise.
6888 2010-02-24 Pedro Alves <pedro@codesourcery.com>
6892 * inferior.h (prepare_for_detach): Declare.
6893 (struct inferior) <detaching>: New field.
6894 * infrun.c (prepare_for_detach): New.
6895 (handle_inferior_event) <random signal>: Don't stop if detaching.
6896 * target.c (target_detach): Call prepare_for_detach.
6898 2010-02-24 Pedro Alves <pedro@codesourcery.com>
6900 Per-process displaced stepping queue.
6902 * infrun.c (displaced_step_ptid, displaced_step_request_queue)
6903 (displaced_step_gdbarch, displaced_step_closure,
6904 (displaced_step_original, displaced_step_copy): Move globals to
6906 (struct displaced_step_inferior_state): ... new structure.
6907 (displaced_step_inferior_states): New global.
6908 (get_displaced_stepping_state, add_displaced_stepping_state)
6909 (remove_displaced_stepping_state, infrun_inferior_exit): New
6911 (displaced_step_clear): Add displaced_step_inferior_state
6912 parameter, and adjust to handle it.
6913 (displaced_step_clear_cleanup): Parameter is now a
6914 displaced_step_inferior_state. Adjust.
6915 (displaced_step_prepare): Adjust.
6916 (displaced_step_fixup, displaced_step_fixup)
6917 (infrun_thread_ptid_changed, resume): Adjust.
6918 (init_wait_for_inferior): Don't call displaced_step_clear.
6919 (infrun_thread_stop_requested): Rewrite.
6920 (_initialize_infrun): Install infrun_inferior_exit as
6921 inferior_exit observer.
6923 2010-02-24 Pedro Alves <pedro@codesourcery.com>
6925 * inferior.h (ptid_match): Declare.
6926 * infrun.c (ptid_match): New.
6927 * remote.c (queued_stop_reply): Rewrite and use ptid_match.
6928 (handle_notification): Add debug output.
6929 * linux-nat.c (ptid_match): Delete.
6931 2010-02-24 David S. Miller <davem@davemloft.net>
6933 * gdb_ptrace.h (PT_SYSCALL): If PTRACE_SYSCALL is available, use it.
6934 * syscalls/sparc-linux.xml: New.
6935 * syscalls/sparc64-linux.xml: New.
6936 * Makefile.in (XML_SYSCALL_FILES): Add new syscall XML files.
6937 * sparc-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC32): Define.
6938 (sparc32_linux_get_syscall_number): New function.
6939 (sparc32_linux_init_abi): Set syscall XML file name and hook up
6940 syscall number fetcher.
6941 * sparc64-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC64): Define.
6942 (sparc64_linux_get_syscall_number): New function.
6943 (sparc64_linux_init_abi): Set syscall XML file name and hook up
6944 syscall number fetcher.
6946 2010-02-24 Vladimir Prus <vladimir@codesourcery.com>
6950 * breakpoint.c (clear_syscall_counts): Take struct inferior*.
6951 * inferior.c (add_inferior_silent): Notify inferior_added
6953 (delete_inferior_1): Notify inferior_removed observer.
6954 (exit_inferior_1): Pass inferior, not pid, to observer.
6955 (inferior_appeared): Likewise.
6956 (add_inferior_with_spaces): New.
6957 (add_inferior_command): Use the above.
6958 * inferior.h (delete_inferior_1, add_inferior_with_spaces):
6961 * inflow.c (inflow_inferior_exit): Likewise.
6962 * jit.c (jit_inferior_exit_hook): Likewise.
6964 * mi/mi-cmds.c (mi_cmds): Register add-inferior and
6966 * mi/mi-cmds.h (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
6967 * mi/mi-interp.c (mi_inferior_added, mi_inferior_removed): New.
6968 (report_initial_inferior): New.
6969 (mi_inferior_removed): Register the above. Make sure
6970 inferior_added observer is called on the first inferior.
6971 (mi_new_thread, mi_thread_exit): Thread group is now identified by
6972 inferior number, not pid.
6973 (mi_solib_loaded, mi_solib_unloaded): Report which inferiors are
6975 * mi/mi-main.c (current_context): New.
6976 (proceed_thread_callback): Use typed closure.
6977 Proceed everything if pid is 0. Most implementation split into
6978 (proceed_thread): ... this.
6979 (run_one_inferior): New.
6980 (mi_cmd_exec_continue, mi_cmd_exec_interrupt, mi_cmd_exec_run):
6981 Adjust for multiexec behaviour.
6982 (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
6983 (mi_cmd_execute): Handle the 'thread-group' option here.
6984 Do some extra checks.
6985 * mi-parse.c (mi_parse): Handle the --all and --thread-group
6987 * mi-parse.h (struct mi_parse): New fields all and thread_group.
6989 2010-02-24 Vladimir Prus <vladimir@codesourcery.com>
6991 Make -exec-run a proper MI commands.
6993 * mi/mi-cmds.h (mi_cmd_exec_run): Declare.
6994 * mi/mi-cmds.c (mi_cmds): Adjust.
6995 * mi/mi-main.c (mi_cmd_exec_run): New.
6997 2010-02-24 Pedro Alves <pedro@codesourcery.com>
6998 Stan Shebs <stan@codesourcery.com>
7000 * tracepoint.h (set_traceframe_number)
7001 (cleanup_restore_current_traceframe): Declare.
7002 * tracepoint.c (set_traceframe_number): New.
7003 (struct current_traceframe_cleanup): New.
7004 (do_restore_current_traceframe_cleanup)
7005 (restore_current_traceframe_cleanup_dtor)
7006 (make_cleanup_restore_current_traceframe): New.
7007 * infrun.c: Include tracepoint.h.
7008 (fetch_inferior_event): Switch out and in of tfind mode.
7010 2010-02-24 Pedro Alves <pedro@codesourcery.com>
7012 * breakpoint.c (breakpoint_init_inferior): Also delete
7013 bp_shlib_event breakpoints.
7014 * solib-frv.c (enable_break): Remove call to
7015 remove_solib_event_breakpoints.
7016 * solib-svr4.c (enable_break): Ditto.
7017 * solib-darwin.c (darwin_solib_create_inferior_hook): Ditto.
7018 * solib-pa64.c (pa64_solib_create_inferior_hook): Ditto.
7019 * solib-som.c (som_solib_create_inferior_hook): Ditto.
7020 * solib-spu.c (spu_enable_break): Ditto.
7022 2010-02-23 Harald Koenig <H.Koenig@science-computing.de>
7024 * c-exp.y (token_and_value): s/union YYSTYPE/YYSTYPE.
7026 2010-02-23 Harald Koenig <H.Koenig@science-computing.de>
7028 * varobj.c (varobj_update): Avoid non-constants in initializers.
7030 2010-02-23 Tom Tromey <tromey@redhat.com>
7032 * dwarf2loc.c (read_pieced_value) <DWARF_VALUE_STACK>: Correctly
7033 handle big-endian values.
7034 (dwarf2_evaluate_loc_desc) <DWARF_VALUE_STACK>: Likewise.
7036 2010-02-22 Pedro Alves <pedro@codesourcery.com>
7041 * breakpoint.c (insert_bp_location): If inserting the read
7042 watchpoint failed, fallback to an access watchpoint.
7043 (bpstat_check_watchpoint): Stop for read watchpoint triggers even
7044 if the value changed, if not watching the same memory for writes.
7045 (watchpoint_locations_match): Add comment.
7046 (update_global_location_list): Copy the location's watchpoint type.
7047 * i386-nat.c (i386_length_and_rw_bits): It's an internal error to
7048 handle read watchpoints here.
7049 (i386_insert_watchpoint): Read watchpoints aren't supported.
7050 * remote.c (remote_insert_watchpoint): Return 1 for unsupported
7052 * target.h (target_insert_watchpoint): Update description.
7054 2010-02-19 Tom Tromey <tromey@redhat.com>
7056 * p-typeprint.c (pascal_type_print_varspec_prefix): Update.
7057 * m2-typeprint.c (m2_print_type): Update.
7058 * gdbtypes.c (recursive_dump_type): Update.
7059 (copy_type_recursive): Update.
7060 * c-typeprint.c (c_type_print_varspec_prefix): Update.
7061 (c_type_print_base): Update.
7062 * gdbtypes.h (TYPE_CODE_TEMPLATE, TYPE_CODE_TEMPLATE_ARG):
7064 (struct cplus_struct_type) <ntemplate_args>: Remove.
7065 <struct template_arg>: Remove.
7066 <is_dynamic>: Move earlier.
7067 (TYPE_TEMPLATE_ARGS): Remove.
7068 (TYPE_NTEMPLATE_ARGS): Remove.
7069 (TYPE_TEMPLATE_ARG): Remove.
7071 2010-02-19 Tom Tromey <tromey@redhat.com>
7073 PR c++/8693, PR c++/9496:
7074 * cp-namespace.c (cp_lookup_nested_type): Handle TYPE_CODE_UNION.
7075 * c-exp.y (lex_one_token): Rename from yylex. Don't call
7076 write_dollar_variable. Don't try to classify NAME tokens.
7077 (token_and_value): New type.
7078 (token_fifo, popping, name_obstack): New globals.
7079 (classify_name): New function.
7080 (classify_inner_name): Likewise.
7082 (VARIABLE): Now has type sval.
7083 (exp : VARIABLE): Call write_dollar_variable.
7084 (qualified_name): Use TYPENAME, not typebase. Add production for
7085 multiple "::" instances.
7086 (variable): Use name_not_typename.
7087 (qualified_type): Remove.
7090 2010-02-19 Jan Kratochvil <jan.kratochvil@redhat.com>
7092 * symfile.c (addr_info_make_relative): Extend comment. Move SECT to
7093 a more inner block. Initialize ADDR by LOWER_OFFSET only if it was
7094 found by bfd_get_section_by_name.
7095 * symfile.h (struct section_addr_info) <sectindex>: New comment.
7097 2010-02-19 Joel Brobecker <brobecker@adacore.com>
7099 * NEWS: Add new "[...] since 7.1" section. Rename the "[...] since
7100 7.0 section" into "Changes in 7.1".
7102 2010-02-19 Joel Brobecker <brobecker@adacore.com>
7104 GDB 7.1 branch created (branch timestamp: 2010-02-18 20:00 UTC)
7105 * version.in: Bump version to 7.1.50.20100219-cvs.
7107 2010-02-18 Harald Koenig <H.Koenig@science-computing.de>
7109 * mi/mi-main.c (mi_cmd_exec_jump): Drop unneeded `return'.
7110 * symfile.c (symfile_map_offsets_to_segments): Fix assertion.
7112 2010-02-17 Tom Tromey <tromey@redhat.com>
7114 * NEWS: Add Python API Improvements section.
7116 2010-02-18 Daniel Jacobowitz <dan@codesourcery.com>
7118 * NEWS: Correct typo.
7120 2010-02-17 Tom Tromey <tromey@redhat.com>
7122 * objfiles.c (gdb_bfd_ref): Handle abfd==NULL.
7124 2010-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
7126 * symfile.c (build_section_addr_info_from_objfile): Include sections
7127 only if they are SEC_ALLOC or SEC_LOAD.
7129 2010-02-17 H.J. Lu <hongjiu.lu@intel.com>
7132 * solib-svr4.c (enable_break): Check size of CORE_ADDR instead
7133 of ULONGEST for address size.
7135 2010-02-17 Tom Tromey <tromey@redhat.com>
7137 * NEWS: Add C++ improvements section.
7139 2010-02-17 Ulrich Weigand <uweigand@de.ibm.com>
7141 * python/python-internal.h [!WITH_THREAD] (PyGILState_Release,
7142 PyThreadState_Swap): Avoid "statement with no effect" warning.
7144 2010-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
7146 * solib-svr4.c (enable_break <target_auxv_search>): New variable
7147 addr_bit. Adjust LOAD_ADDR sign for cross-arch inferiors.
7149 2010-02-17 Tristan Gingold <gingold@adacore.com>
7150 Petr Hluzin <petr.hluzin@gmail.com>
7152 * avr-tdep.c (avr_scan_prologue): Convert an if statement to a
7153 gdb_assert. Fix info->size for SIG prologue.
7155 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
7157 * infcmd.c (show_inferior_tty_command): Check for NULL.
7158 Correct output message.
7160 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
7162 * linespec.c (decode_line_1): Handle FILE:FUNCTION even if
7163 FUNCTION contains parentheses. Improve removal of a trailing
7166 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
7168 * gcore.c (do_bfd_delete_cleanup): New function.
7169 (gcore_command): Use it. Discard the cleanup after success.
7170 (gcore_copy_callback): Delete dead code.
7172 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
7174 * symfile.c (addr_info_make_relative): Always use
7175 find_lowest_section.
7177 2010-02-16 Sami Wagiaalla <swagiaal@redhat.com>
7179 * NEWS: Added entry for namespace fixes.
7181 2010-02-15 Tom Tromey <tromey@redhat.com>
7183 * dwarf2read.c (guess_structure_name): Allocate name on the
7186 2010-02-15 Tom Tromey <tromey@redhat.com>
7188 * c-typeprint.c (c_type_print_base): Reverse order of test.
7190 2010-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
7192 * solib-svr4.c (LM_ADDR_CHECK): New variable minpagesize. Optionally
7193 initialize it from ELF BFD. Extend the prelink condition by it.
7195 2010-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
7197 * defs.h (parse_pid_to_attach): New.
7198 * utils.c (parse_pid_to_attach): New.
7199 * darwin-nat.c (darwin_attach): Replace ARGS parsing by parse_pid.
7200 * gnu-nat.c (gnu_attach): Likewise.
7201 * nto-procfs.c (procfs_attach): Likewise.
7202 * procfs.c (procfs_attach): Likewise.
7203 * windows-nat.c (windows_attach): Likewise.
7204 * inf-ptrace.c (inf_ptrace_attach): Likewise. Remove variable dummy.
7205 * inf-ttrace.c (inf_ttrace_attach): Likewise.
7206 * remote.c (extended_remote_attach_1): Likewise. New comment on getpid
7209 2010-02-14 Masaki Muranaka <monaka@monami-software.com>
7211 * MAINTAINERS: Add myself for write after approval privileges.
7213 2010-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
7215 * solib-svr4.c: (LM_ADDR_CHECK): Move variable align to a more inner
7218 2010-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
7220 * solib-svr4.c: (LM_ADDR_CHECK): Print successful prelink adjustment
7221 only if INFO_VERBOSE.
7223 2010-02-12 Tomas Holmberg <th@virtutech.com>
7225 * mi/mi-main.c: Added the --reverse flag to the following MI
7226 commands: exec-continue, exec-finish, exec-next, exec-step,
7227 exec-next-instruction, exec-step-instruction. This is to
7228 support reverse execution over the MI interface to gdb.
7230 2010-02-12 Pedro Alves <pedro@codesourcery.com>
7232 * tracepoint.c (_initialize_tracepoint): Specify that the address
7233 range of `tfind outsize' is exclusive, and that the address range
7234 of `tfind range' is inclusive, in the commands' help strings.
7236 2010-02-12 Joel Brobecker <brobecker@adacore.com>
7238 Spurious "dll not found" error messages on x64-windows.
7239 * windows-nat.c: Add include of complaints.h.
7240 (handle_unload_dll): Change dll-not-found error into a complaint.
7242 2010-02-12 Pedro Alves <pedro@codesourcery.com>
7244 * breakpoint.c (allocate_bp_location): Use bp_loc_other for
7245 bp_tracepoint and bp_fast_tracepoint, not
7246 bp_loc_software_breakpoint.
7247 (update_global_location_list): Tracepoints are never duplicates of
7250 2010-02-12 Pedro Alves <pedro@codesourcery.com>
7252 * breakpoint.c (break_command_really): Change return type to int.
7253 Return false if no breakpoint was created, true otherwise.
7254 (trace_command): Don't set the tracepoint count if no tracepoint
7256 (ftrace_command): Ditto.
7257 (create_tracepoint_from_upload): Bail out if the tracepoint wasn't
7258 created in the breakpoints table.
7260 2010-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
7261 Ulrich Weigand <uweigand@de.ibm.com>
7263 * solib-svr4.c (LM_ADDR_CHECK): New comment on PPC-aware condition.
7265 2010-02-11 Pedro Alves <pedro@codesourcery.com>
7267 * ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out if
7268 the offset value isn't of integral type.
7270 2010-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
7272 * breakpoint.c (delete_breakpoint) <bpt->related_breakpoint != NULL>:
7275 2010-02-11 Pedro Alves <pedro@codesourcery.com>
7277 * ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out on
7278 non-subscriptable types.
7279 * valarith.c (binop_types_user_defined_p): New, abstracted out
7281 (binop_user_defined_p): ... this.
7282 * value.h (binop_types_user_defined_p): Declare.
7284 2010-02-11 Pedro Alves <pedro@codesourcery.com>
7286 * tracepoint.c (tfile_open): Remove spurious discard_cleanups.
7287 Merge uploaded TSVs before merging uploaded tracepoints.
7289 2010-02-11 Pedro Alves <pedro@codesourcery.com>
7291 * ax-gdb.c (gen_deref): Don't allow dereferencing void pointers.
7293 2010-02-11 Vladimir Prus <vladimir@codesourcery.com>
7295 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Add extra
7296 whitespace character after a dot in comment.
7297 (mi_cmd_stack_list_arguments, mi_cmd_stack_list_variables):
7299 (list_args_or_locals): For the 'all' (that is
7300 -stack-list-variables) case, always output list of tuples.
7301 Output 'arg' field if variable is argument.
7303 2010-02-10 Tom Tromey <tromey@redhat.com>
7305 * parser-defs.h (parser_debug): Declare.
7306 * parse.c (_initialize_parse): Install "debug parser" set/show
7308 (parser_debug): New global.
7309 (show_parserdebug): New function.
7310 * c-exp.y (c_parse): Set yydebug.
7312 2010-02-10 H.J. Lu <hongjiu.lu@intel.com>
7314 * target-descriptions.c (tdesc_type): Add TDESC_TYPE_I387_EXT,
7315 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
7316 (tdesc_predefined_types): Add i387_ext, i386_eflags and
7318 (tdesc_find_type): New.
7319 (tdesc_gdb_type): Use tdesc_find_type. Handle TDESC_TYPE_I387_EXT,
7320 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
7322 * target-descriptions.h (tdesc_find_type): New.
7324 2010-02-10 Michael Snyder <msnyder@vmware.com>
7326 * gdb-gdb.py: Comment fix.
7328 2010-02-09 Tristan Gingold <gingold@adacore.com>
7330 * machoread.c (macho_symfile_relocate): New function.
7331 (macho_sym_fns): Use macho_symfile_relocate instead of
7332 default_symfile_relocate.
7333 (macho_oso_data): New type.
7334 (current_oso): New variable.
7335 (macho_add_oso_symfile): Do not compute section_addr_info, but
7336 instead set vma of sections.
7337 Do not set SYMFILE_VERBOSE to call symbol_file_add_from_bfd.
7338 Set and clear current_oso.
7340 2010-02-09 Joel Brobecker <brobecker@adacore.com>
7342 Wrong type description for tagged type parameter.
7343 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: When noside is
7344 EVAL_AVOID_SIDE_EFFECTS, also handle the case when type is a
7345 reference to a tagged type.
7347 2010-02-09 Tristan Gingold <gingold@adacore.com>
7349 * objfiles.c (objfile_separate_debug_iterate): Do not iterate on
7350 brothers of the parent.
7352 2010-02-08 Tom Tromey <tromey@redhat.com>
7356 * valops.c (search_struct_field): Make 'name' const.
7357 (search_struct_method): Likewise.
7358 (find_method_list): Make 'method' const.
7359 (value_struct_elt): Make 'name' and 'err' const.
7360 (value_find_oload_method_list): Make 'method' const.
7361 (find_overload_match): Make 'name' const.
7362 * eval.c (evaluate_subexp_standard): New locals function,
7364 <OP_FUNCALL>: Handle OP_SCOPE specially.
7366 2010-02-08 Ulrich Weigand <uweigand@de.ibm.com>
7368 * infrun.c (handle_inferior_event): Do not look up regcache
7369 for exited processes.
7371 2010-02-08 Chris Moller <moller@mollerware.com>
7374 * valarith.c (value_ptrdiff): Added a test for a zero type length,
7375 warn if found, and assume length = 1.
7377 2010-02-08 Chris Moller <cmoller@redhat.com>
7380 * cp-valprint.c (cp_print_value_fields) Fix use of obstacks.
7381 (cp_print_static_field) Fix use of obstacks.
7383 2010-02-08 Pedro Alves <pedro@codesourcery.com>
7385 * linux-nat.c (linux_nat_resume): In non-stop, also only tag
7386 resumed LWPs as resumed.
7387 (linux_nat_wait_1): If there's no resumed LWP in the set of LWPs
7388 we're waiting for, bail out with TARGET_WAITKIND_IGNORE, instead
7389 of throwing an internal error. If an LWP of a process we're not
7390 waiting for reports a signal, don't force collecting a SIGSTOP,
7391 and if it was breakpoint hit in non-stop mode, cancel it. Don't
7392 go through all LWPs cancelling breakpoints in non-stop mode.
7393 (resume_stopped_resumed_lwps): New.
7394 (linux_nat_wait): Use it.
7396 2010-02-07 H.J. Lu <hongjiu.lu@intel.com>
7398 * features/Makefile (WHICH): Add i386/i386, i386/i386-linux,
7399 i386/amd64 and i386/amd64-linux.
7400 (i386/i386-expedite): New.
7401 (i386/i386-linux-expedite): Likewise.
7402 (i386/amd64-expedite):Likewise.
7403 (i386/amd64-linux-expedite): Likewise.
7404 ($(outdir)/i386/i386-linux.dat): Likewise.
7405 ($(outdir)/i386/amd64.dat): Likewise.
7406 ($(outdir)/i386/amd64-linux.dat): Likewise.
7408 * features/i386/32bit-core.xml: New.
7409 * features/i386/32bit-linux.xml: Likewise.
7410 * features/i386/32bit-sse.xml: Likewise.
7411 * features/i386/64bit-core.xml: Likewise.
7412 * features/i386/64bit-linux.xml: Likewise.
7413 * features/i386/64bit-sse.xml: Likewise.
7414 * features/i386/i386-linux.xml: Likewise.
7415 * features/i386/i386.xml: Likewise.
7416 * features/i386/amd64-linux.xml: Likewise.
7417 * features/i386/amd64.xml: Likewise.
7418 * features/i386/i386-linux.c: Likewise.
7419 * features/i386/i386.c: Likewise.
7420 * features/i386/amd64-linux.c: Likewise.
7421 * features/i386/amd64.c: Likewise.
7423 2010-02-05 Sami Wagiaalla <swagiaal@redhat.com>
7426 * cp-support.h: Added char* alias element to using_direct data
7428 (cp_add_using): Added char* alias argument.
7429 (cp_add_using_directive): Ditto.
7430 * cp-namespace.c: Updated with the above changes.
7431 (cp_lookup_symbol_imports): Check for aliases.
7432 * dwarf2read.c (read_import_statement): Figure out local alias
7433 for the import and pass it on to cp_add_using.
7434 (read_namespace): Pass alias argument to cp_add_using.
7436 2010-02-05 Hui Zhu <teawater@gmail.com>
7438 * defs.h (gdb_bfd_errmsg): New extern.
7439 * exec.c (exec_file_attach): Change bfd_errmsg to
7441 * utils.c (AMBIGUOUS_MESS1): New macro.
7442 (AMBIGUOUS_MESS2): New macro.
7443 (gdb_bfd_errmsg): New function.
7445 2010-02-04 Doug Evans <dje@google.com>
7447 * solib-svr4.c (enable_break): Add comment.
7449 2010-02-04 Anthony Green <green@moxielogic.com>
7451 * moxie-tdep.c (moxie_analyze_prologue): Fail protocol analysis
7454 2010-02-04 Tom Tromey <tromey@redhat.com>
7456 * valops.c (search_struct_field): Account for
7457 value_embedded_offset. Fix check for virtual base past the end of
7458 the object. Use value_copy when making a slice of the value.
7460 2010-02-04 H.J. Lu <hongjiu.lu@intel.com>
7463 * tui/tui-interp.c (tui_init): Call tui_initialize_readline
7464 only if gdb_stdout is a tty.
7466 2010-02-04 H.J. Lu <hongjiu.lu@intel.com>
7468 * target-descriptions.c: Include "osabi.h".
7469 (maint_print_c_tdesc_cmd): Generate set_tdesc_osabi for valid
7472 2010-02-04 Tristan Gingold <gingold@adacore.com>
7474 * machoread.c (macho_add_oso): Renamed to macho_register_oso.
7475 (macho_symtab_read): Adjust calls to macho_add_oso.
7476 (macho_oso_symfile): Renamed to macho_symfile_read_all_oso.
7477 (macho_symfile_read): Adjust call to macho_oso_symfile.
7478 (macho_new_init): Move this function after declarations.
7479 (macho_symfile_init): Ditto.
7480 * darwin-nat-info.c (darwin_lib_gdb_ports): Remove.
7481 * darwin-nat.c (darwin_lookup_task): Remove unused prototype.
7483 2010-02-04 Vladimir Prus <vladimir@codesourcery.com>
7485 Include MI command in remotelog.
7487 * mi/mi-main.c (mi_execute_command): Call target_log_command.
7489 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
7491 * remote.c (remote_state): Remove gdbarch.
7492 (init_remote_state): Don't set gdbarch.
7493 (remote_query_supported): Pass target_gdbarch instead of
7494 rs->gdbarch to gdbarch_qsupported.
7496 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
7498 * gdbarch.sh: Add qsupported.
7500 * gdbarch.c: Regenerated.
7501 * gdbarch.h: Likewise.
7503 * remote.c (remote_state): Add gdbarch.
7504 (init_remote_state): Set gdbarch.
7505 (remote_query_supported): Support gdbarch_qsupported.
7507 2010-02-03 Daniel Jacobowitz <dan@codesourcery.com>
7509 * amd64fbsd-nat.c (amd64fbsd_supply_pcb): Also check for
7510 __FreeBSD_kernel_version.
7512 2010-02-03 Tristan Gingold <gingold@adacore.com>
7514 * symfile.h (struct sym_fns): Add sym_relocate field.
7515 (default_symfile_relocate): New prototype.
7516 (symfile_relocate_debug_section): First argument is now an objfile.
7517 * symfile.c (default_symfile_relocate): Rename from
7518 symfile_relocate_debug_section, first argument is now an objfile.
7519 (symfile_relocate_debug_section): New function.
7520 * coffread.c (coff_sym_fns): Set sym_relocate field.
7521 * somread.c (som_sym_fns): Ditto.
7522 * mipsread.c (ecoff_sym_fns): Ditto.
7523 * machoread.c (macho_sym_fns): Ditto.
7524 * elfread.c (elf_sym_fns): Ditto.
7525 * dwarf2read.c (dwarf2_read_section): Ditto.
7526 * xcoffread.c (xcoff_sym_fns): Ditto.
7527 * dbxread.c (aout_sym_fns): Ditto.
7528 (dbx_psymtab_to_symtab): Adjust call to symfile_relocate_debug_section.
7529 (elfstab_build_psymtabs): Ditto.
7531 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
7533 * defs.h (MAX_REGISTER_SIZE): Increase to 32.
7535 2010-02-02 Tom Tromey <tromey@redhat.com>
7537 * valops.c (value_cast_structs): Try downcasting using the RTTI
7540 2010-02-02 Tom Tromey <tromey@redhat.com>
7542 * gnu-v2-abi.c: Don't include gnu-v2-abi.h.
7543 (gnuv2_baseclass_offset): Now static.
7544 * Makefile.in (HFILES_NO_SRCDIR): Remove gnu-v2-abi.h.
7545 * gnu-v2-abi.h: Remove.
7547 2010-02-02 Tom Tromey <tromey@redhat.com>
7549 * m2-typeprint.c (m2_record_fields): Don't use
7551 * gdbtypes.h (TYPE_DECLARED_CLASS): New macro.
7552 (struct main_type) <flag_declared_class>: New field.
7553 (struct cplus_struct_type) <declared_type>: Remove.
7554 <ntemplate_args>: Move earlier.
7555 (DECLARED_TYPE_CLASS, DECLARED_TYPE_UNION, DECLARED_TYPE_STRUCT)
7556 (DECLARED_TYPE_TEMPLATE): Remove.
7557 (TYPE_DECLARED_TYPE): Remove.
7558 * gdbtypes.c (lookup_union): Don't use TYPE_DECLARED_TYPE.
7559 * dwarf2read.c (read_structure_type): Set TYPE_DECLARED_CLASS.
7560 * c-typeprint.c (c_type_print_base): Use TYPE_DECLARED_CLASS, not
7563 2010-02-02 Tom Tromey <tromey@redhat.com>
7565 PR c++/11226, PR c++/9629, PR c++/9688, PR c++/8890:
7566 * valops.c (search_struct_field): Compute nbases after calling
7568 (check_field): Call CHECK_TYPEDEF.
7569 * cp-valprint.c (cp_print_value): Pass correct address to
7570 baseclass_offset. Fix check for virtual base past the end of the
7571 object. Don't offset address passed to cp_print_value_fields or
7572 apply_val_pretty_printer.
7573 (cp_print_value_fields): Fix call to val_print.
7574 (cp_print_value_fields_rtti): New function.
7575 * c-valprint.c (c_val_print): Use cp_print_value_fields_rtti.
7576 * p-valprint.c (pascal_object_print_value_fields): Fix call to
7578 * python/py-prettyprint.c (apply_val_pretty_printer): Add embedded
7580 * language.h (struct language_defn) <la_val_print>: Document.
7581 * c-lang.h (cp_print_value_fields_rtti): Declare.
7583 2010-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7586 * linux-low.c (linux_tracefork_child) [!(__UCLIBC__ && HAS_NOMMU)]: New.
7587 (linux_test_for_tracefork): Move `stack' into [__UCLIBC__ && HAS_NOMMU].
7588 (linux_test_for_tracefork) [!(__UCLIBC__ && HAS_NOMMU)]: New.
7590 2010-02-01 Michael Matz <matz@suse.de>
7591 Daniel Jacobowitz <dan@codesourcery.com>
7593 * i386-tdep.c (i386_frame_cache): Assume valid anonymous
7594 functions use a frame pointer.
7596 2010-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7598 * solib-svr4.c (scan_dyntag): New variable dyn_addr. Replace gdb_assert
7599 by a conditional setting DYN_ADDR. Use DYN_ADDR.
7600 * config/djgpp/fnchange.lst: Add translations for
7601 symbol-without-target_section.exp and symbol-without-target_section.c.
7603 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
7605 * gdbarch.sh: Set LANG and LC_ALL to C, not c.
7606 (remote_breakpoint_for_pc): Correct invalid_p check.
7607 * gdbarch.c: Regenerated.
7609 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
7611 * arm-tdep.c (arm_find_mapping_symbol): New function, from
7613 (arm_pc_is_thumb): Use arm_find_mapping_symbol.
7614 (extend_buffer_earlier): New function.
7615 (MAX_IT_BLOCK_PREFIX, IT_SCAN_THRESHOLD): New constants.
7616 (arm_adjust_breakpoint_address): New function.
7617 (arm_gdbarch_init): Register arm_adjust_breakpoint_address.
7619 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
7621 * arm-linux-tdep.c (arm_linux_thumb2_be_breakpoint)
7622 (arm_linux_thumb2_le_breakpoint): New constants.
7623 (arm_linux_init_abi): Set thumb2_breakpoint and
7624 thumb2_breakpoint_size.
7625 * arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions.
7626 (thumb_get_next_pc): Add a comment. Rename IT to ITSTATE.
7627 Implement support for single stepping through IT blocks if
7628 a 32-bit Thumb breakpoint instruction is available.
7629 (arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction
7630 is available, use it when needed.
7631 (arm_remote_breakpoint_from_pc): New function.
7632 (arm_gdbarch_init): Register arm_remote_breakpoint_from_pc.
7633 * arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint
7634 comment. Add thumb2_breakpoint and thumb2_breakpoint_size.
7636 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
7638 * arch-utils.c (default_remote_breakpoint_from_pc): New function.
7639 * arch-utils.h (default_remote_breakpoint_from_pc): Declare.
7640 * gdbarch.c, gdbarch.h: Regenerated.
7641 * gdbarch.sh (remote_breakpoint_from_pc): New architecture method.
7642 * remote.c (remote_insert_breakpoint, remote_insert_hw_breakpoint): Use
7643 gdbarch_remote_breakpoint_from_pc.
7645 2010-01-29 Daniel Jacobowitz <dan@codesourcery.com>
7647 * infrun.c (prepare_to_proceed): Handle other signals which might
7649 (handle_inferior_event): Move the check for unusual breakpoint
7652 2010-01-29 Paul Hilfinger <hilfinger@adacore.com>
7654 amd64 - function returning record with field straddling 2 registers.
7655 * amd64-tdep.c (amd_classify_aggregate): Handle the case of
7656 a record of length <= 16 in which a field straddles the two
7659 2010-01-29 Joel Brobecker <brobecker@adacore.com>
7661 Implement return values on amd64-windows.
7662 * amd64-windows-tdep.c: #include gdbcore.h and regcache.h.
7663 (amd64_windows_return_value): New function.
7664 (amd64_windows_init_abi): Call set_gdbarch_return_value with
7665 amd64_windows_return_value.
7667 2010-01-29 Joel Brobecker <brobecker@adacore.com>
7669 amd64-windows: 32 bytes allocated on stack by caller for integer
7670 parameter registers.
7671 * i386-tdep.h (struct gdbarch_tdep): Add new field
7672 integer_param_regs_saved_in_caller_frame.
7673 * amd64-windows-tdep.c (amd64_windows_init_abi): Set
7674 tdep->integer_param_regs_saved_in_caller_frame to 1.
7675 * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
7676 stack if tdep->integer_param_regs_saved_in_caller_frame is set.
7678 2010-01-29 Joel Brobecker <brobecker@adacore.com>
7680 amd64-windows: memory args passed by pointer during function calls.
7681 * i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
7682 * amd64-tdep.c (amd64_push_arguments): Add handling of architectures
7683 where tdep->memory_args_by_pointer is non-zero.
7684 * amd64-windows-tdep.c (amd64_windows_init_abi): Set
7685 tdep->memory_args_by_pointer to 1.
7687 2010-01-29 Joel Brobecker <brobecker@adacore.com>
7689 amd64-windows: Integer parameters in function calls.
7690 * i386-tdep.h (enum amd64_reg_class): New, moved here from
7692 (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
7693 call_dummy_integer_regs, and classify.
7694 * amd64-tdep.h (amd64_classify): Add declaration.
7695 * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
7696 (amd64_reg_class): Delete, moved to i386-tdep.h.
7697 (amd64_classify): Make non-static. Move declaration to amd64-tdep.h.
7698 Replace call to amd64_classify by call to tdep->classify.
7699 (amd64_push_arguments): Get the list of registers to use for
7700 passing integer parameters from the gdbarch tdep structure,
7701 rather than using a hardcoded one. Replace calls to amd64_classify
7702 by calls to tdep->classify.
7703 (amd64_push_dummy_call): Get the register number used for
7704 the "hidden" argument from tdep->call_dummy_integer_regs.
7705 (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
7706 and tdep->call_dummy_integer_regs. Set tdep->classify.
7707 * amd64-windows-tdep.c: Add include of gdbtypes.h.
7708 (amd64_windows_dummy_call_integer_regs): New static global.
7709 (amd64_windows_classify): New function.
7710 (amd64_windows_init_abi): Initialize tdep->call_dummy_num_integer_regs
7711 tdep->call_dummy_integer_regs and tdep->classify.
7713 2010-01-28 Daniel Jacobowitz <dan@codesourcery.com>
7715 * regcache.c (regcache_xmalloc): Add aspace argument. Use it
7716 for the new regcache. All callers updated.
7717 (regcache_cpy, regcache_cpy_no_passthrough): Do not set aspace here.
7718 (get_thread_arch_regcache): Do not set aspace here.
7719 * regcache.h (regcache_xmalloc): Update declaration.
7721 * frame.c, infcall.c, ppc-linux-tdep.c: Calls to
7722 regcache_xmalloc updated.
7724 2010-01-28 Joel Brobecker <brobecker@adacore.com>
7726 Another -Wunused-function error in procfs.c (sparc-solaris)
7727 * procfs.c (insert_dbx_link_breakpoint): Delete declaration. Move up.
7728 Only define if SYS_syssgi is defined.
7729 (remove_dbx_link_breakpoint): Delete declaration. Move up.
7730 (dbx_link_addr, insert_dbx_link_bpt_in_file)
7731 (insert_dbx_link_bpt_in_region): Move up. Only define if SYS_syssgi
7734 2010-01-27 Christopher Faylor <me+cygwin@cgf.cx>
7736 * windows-nat.c (windows_initialization_done): New variable.
7737 (get_windows_debug_event): Issue error when process dies before
7738 completely initializing.
7739 (do_initial_windows_stuff): Set flag to indicate when we are done with
7740 the initial steps of attaching to the child.
7742 2010-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
7744 * symtab.h (struct symbol <symtab>): New comment on NULL values.
7746 2010-01-27 Doug Evans <dje@google.com>
7748 * solib-svr4.c (solib_break_names): Add __dl_rtld_db_dlactivity.
7750 * breakpoint.c (bpstat_stop_status): Delete useless code.
7752 2010-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
7754 * printcmd.c (display_uses_solib_p): Remove variable section. Access
7755 objfile via SYMBOL_SYMTAB.
7757 2010-01-26 Tom Tromey <tromey@redhat.com>
7760 * eval.c (evaluate_subexp_for_address) <UNOP_IND>: Call
7761 coerce_array on result.
7763 2010-01-26 Sami Wagiaalla <swagiaal@redhat.com>
7765 * cp-namespace.c (cp_lookup_symbol_namespace): Added
7766 search_parent argument.
7767 (cp_add_using): Initialize 'searched' field.
7768 (reset_directive_searched): New function.
7769 * cp-support.h: Add 'searched' field to using_direct struct.
7770 (cp_lookup_symbol_imports): Ditto.
7771 * cp-namespace.c (cp_lookup_symbol_imports): Ditto.
7772 Perform recursive search.
7773 Implement non parent search.
7774 * valops.c (value_maybe_namespace_elt): Updated.
7776 2010-01-26 Sami Wagiaalla <swagiaal@redhat.com>
7779 * dwarf2read.c (read_lexical_block_scope): Create blocks for
7780 scopes which contain using directives even if they contain no
7782 * symtab.c (lookup_symbol_aux): Pass lowest level block to
7783 la_lookup_symbol_nonlocal.
7784 * cp-namespace.c (cp_lookup_symbol_nonlocal): call
7785 cp_lookup_symbol_namespace.
7786 (cp_lookup_symbol_namespace): Perform an import lookup at every
7788 (cp_lookup_symbol_imports): New function.
7789 (cp_lookup_symbol_in_namespace): New function.
7791 2010-01-25 Tom Tromey <tromey@redhat.com>
7794 * c-valprint.c (c_val_print): Fix test of extract_unsigned_integer
7797 2010-01-25 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
7799 * configure.ac: Only use host_os part when disabling TUI on osf.
7800 Use test to check variables, prefix strings with x.
7801 * configure: Regenerate.
7803 * solib-osf.c (osf_current_sos): Initialize tail.
7805 2010-01-25 gingold <gingold@adacore.com>
7807 * windows-nat.c (windows_continue): Use %x to print thread id.
7808 (get_windows_debug_event): Ditto.
7810 2010-01-22 Tom Tromey <tromey@redhat.com>
7813 * dwarf2read.c (quirk_gcc_member_function_pointer): Change return
7814 type and arguments. Use smash_to_methodptr_type.
7815 (read_structure_type): Call quirk_gcc_member_function_pointer
7817 * gdbtypes.h (smash_to_methodptr_type): Declare.
7818 * gdbtypes.c (smash_to_methodptr_type): New function.
7819 (lookup_methodptr_type): Use it.
7821 2010-01-21 Tom Tromey <tromey@redhat.com>
7824 * symtab.h (lookup_minimal_symbol_and_objfile): Declare.
7825 * minsyms.c (lookup_minimal_symbol_and_objfile): New function.
7826 * glibc-tdep.c (find_minsym_and_objfile): Remove.
7827 (glibc_skip_solib_resolver): Use
7828 lookup_minimal_symbol_and_objfile.
7830 2010-01-21 Kai Tietz <kai.tietz@onevision.com>
7832 * inflow.c (check_syscall): Guard by #if clause for GO32 and
7835 2010-01-20 Tom Tromey <tromey@redhat.com>
7838 * valarith.c (value_binop): Handle BINOP_GTR, BINOP_LEQ, and
7839 BINOP_GEQ. Handle BINOP_NOTEQUAL in the signed case.
7840 * dwarf2expr.c (new_dwarf_expr_context): Allocate
7841 dwarf_stack_values, not CORE_ADDRs.
7842 (execute_stack_op): Change DW_OP_div and comparison operators to
7843 use signed operands.
7845 2010-01-20 Vladimir Prus <vladimir@codesourcery.com>
7847 Per-inferior args and tty and environment.
7849 * infcmd.c (inferior_args): Rename to ...
7850 (inferior_args_scratch): ... this.
7851 (inferior_io_terminal): Rename to ...
7852 (inferior_io_terminal_scratch): ... this.
7853 (inferior_argc, inferior_argv): Remove.
7854 (set_inferior_io_terminal, get_inferior_io_terminal): Store
7855 inside current_inferior().
7856 (set_inferior_tty_command, show_inferior_tty_command): New.
7857 (get_inferior_args, set_inferior_args): Store inside
7859 (notice_args_set): Likewise and rename to...
7860 (set_args_command): ... this.
7861 (set_inferior_args_vector): Likewise.
7862 (notice_args_read): Rename to...
7863 (show_args_command): ...new.
7864 (tty_command): Remove.
7865 (run_command_1): Don't free old args, as they are freed by
7866 set_inferior_arg now.
7867 (run_no_args_command): Likewise.
7868 (inferior_environ): Remove.
7869 (run_command_1): Use environment of the current inferior.
7870 (environment_info, set_environment_command)
7871 (unset_environment_command, path_info, path_command): Likewise.
7872 (_initialize_infcmd): Adjust for function and variable renames.
7873 Do not init inferior_environ.
7874 * inferior.h (set_inferior_arg): Adjust prototype.
7875 (struct inferior): New fields args, argc, argv, terminal, environment.
7876 (inferior_environ): Remove declaration.
7877 * inferior.c (free_inferior): Free new fields.
7878 (add_inferior_silent): Initialize 'environment' field.
7879 * main.c (captured_main): Set arguments only after the initial
7880 inferior has been created. Set set_inferior_io_terminal,
7882 * mi/mi-main.c (mi_cmd_env_path): Use environment of the current
7884 (_initialize_mi_cmd_env): Adjust for disappearance of global
7886 * solib.c (solib_find): Use environment of the current inferior.
7888 2010-01-20 Jan Kratochvil <jan.kratochvil@redhat.com>
7890 * varobj.c (varobj_add_child, install_dynamic_child): Wrap into #if
7892 (instantiate_pretty_printer): Move HAVE_PYTHON outside of the function.
7894 2010-01-20 Joel Brobecker <brobecker@adacore.com>
7896 Get rid of ada-lang.c:function_name_from_pc.
7897 * ada-lang.c: Add "stack.h" #include.
7898 (function_name_from_pc): Delete.
7899 (is_known_support_routine): Replace call to function_name_from_pc
7900 by call to find_frame_funname.
7901 (ada_unhandled_exception_name_addr_from_raise): Likewise.
7903 2010-01-19 Tom Tromey <tromey@redhat.com>
7906 * dwarf2read.c (read_partial_die): Allocate partial DIE's name on
7909 2010-01-19 Tom Tromey <tromey@redhat.com>
7911 * top.c (stop_sig, float_handler, do_nothing): Remove.
7913 2010-01-19 Jan Kratochvil <jan.kratochvil@redhat.com>
7915 * breakpoint.c (watchpoint_check): Check the call
7916 gdbarch_in_function_epilogue_p before calling frame_find_by_id.
7918 * config/djgpp/fnchange.lst: Add translations for
7919 watchpoint-cond-gone.exp, watchpoint-cond-gone.c and
7920 watchpoint-cond-gone-stripped.c.
7922 2010-01-19 Tom Tromey <tromey@redhat.com>
7925 * dwarf2read.c (partial_die_parent_scope): Put enumeration type
7926 into parent scope, and enumerator into grandparent scope.
7928 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7930 * NEWS: Add entry for "set/show ada trust-PAD-over-XVS" commands.
7932 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7934 * configure.host: Make x86_64-*-solaris2.1[0-9]* an alias of
7935 i[34567]86-*-solaris2.1[0-9]*.
7936 * configure.tgt: Likewise.
7938 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7940 * NEWS: Document the source command enhancement allowing it
7941 to load Python scripts. Document the "set/show script-extension"
7944 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7946 Add -Wunused-function to compile flags.
7947 * configure.ac: Add -Wunused-function to build_warnings.
7948 * configure: Regenerate.
7950 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7952 "delete" ada-lex.c:input function, not used.
7953 * ada-lex.l: #define YY_NO_INPUT.
7955 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7957 Delete free_named_symtabs and associated cleanup.
7958 * symfile.h (free_named_symtabs): Delete declaration.
7959 * symfile.c: Remove some commented out code (clear_symtab_users_once).
7960 (cashier_psymtab): Comment function out.
7962 (free_named_symtabs): Delete.
7963 * coffread.c (coff_end_symtab): Remove call to free_named_symtabs.
7964 * dbxread.c (end_psymtab): Likewise.
7965 * dwarf2read.c (process_psymtab_comp_unit): Ditto.
7966 * exec.c (exec_close_1): Ditto.
7967 * xcoffread.c (xcoff_end_psymtab): Likewise.
7969 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7971 * stack.c (print_block_frame_labels): Comment function out.
7973 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7975 Delete unused or undefined functions.
7976 * breakpoint.c (ep_parse_optional_filename): Delete.
7977 * dcache.c (dcache_write_line): Remove declaration.
7978 * infrun.c (build_infrun): Remove declaration.
7979 * tracepoint.c (tracepoint_save_command): Remove declaration.
7980 * linux-nat.c (init_lwp_list): Delete. No longer used.
7981 * event-loop.c (check_async_signal_handlers): Delete declaration.
7982 * infrun.c (init_execution_control_state): Delete.
7983 (proceed): Update comment to avoid mentioning
7984 init_execution_control_state.
7985 * target.c (kill_or_be_killed, nosupport_runtime): Delete.
7986 * ada-lang.c (ada_to_static_fixed_value): Delete.
7987 * scm-lang.c (evaluate_subexp_scm): Delete declaration.
7988 * cp-namespace.c (cp_copy_usings): Delete.
7989 * xml-syscall.c (xml_number_of_syscalls): Delete.
7990 * progspace.c (find_program_space_by_num): Delete.
7991 * inflow.c (handle_sigio): Delete declaration.
7992 * hppa-tdep.c (hppa_alignof): Delete.
7993 * mipsnbsd-tdep.c (mipsnbsd_sigtramp_offset)
7994 (mipsnbsd_core_osabi_sniffer): Delete.
7996 2010-01-18 Tom Tromey <tromey@redhat.com>
7999 * c-exp.y (REINTERPRET_CAST, DYNAMIC_CAST, STATIC_CAST)
8000 (CONST_CAST): New tokens.
8001 (exp): Add new productions.
8002 (ident_tokens): Add const_cast, dynamic_cast, static_cast, and
8004 (is_cast_operator): New function.
8005 (yylex): Handle cast operators specially.
8006 * eval.c (evaluate_subexp_standard) <UNOP_DYNAMIC_CAST,
8007 UNOP_REINTERPRET_CAST>: New cases.
8008 * expprint.c (print_subexp_standard): Likewise.
8009 (op_name_standard): Likewise.
8010 (dump_subexp_body_standard): Likewise.
8011 * parse.c (operator_length_standard): Likewise.
8012 * expression.h (enum exp_opcode): New constants UNOP_DYNAMIC_CAST,
8013 UNOP_REINTERPRET_CAST.
8014 * gdbtypes.c (class_types_same_p): New function.
8015 (is_ancestor): Use it.
8016 (is_public_ancestor): New function.
8017 (is_unique_ancestor_worker): Likewise.
8018 (is_unique_ancestor): Likewise.
8019 * gdbtypes.h (class_types_same_p, is_public_ancestor)
8020 (is_unique_ancestor): Declare.
8021 * valops.c (value_reinterpret_cast): New function.
8022 (dynamic_cast_check_1): Likewise.
8023 (dynamic_cast_check_2): Likewise.
8024 (value_dynamic_cast): Likewise.
8025 * value.h (value_reinterpret_cast, value_dynamic_cast): Declare.
8027 2010-01-18 Joel Brobecker <brobecker@adacore.com>
8029 Fix build failure when building without Python support.
8030 * python/python.c: Always include exceptions.h, even when HAVE_PYTHON
8033 2010-01-18 Joel Brobecker <brobecker@adacore.com>
8035 Use XVS field type instead of doing a parallel lookup.
8036 * ada-lang.c (ada_get_base_type): Follow the XVS field type
8037 if it is a reference type instead of doing a type lookup using
8040 2010-01-18 Joel Brobecker <brobecker@adacore.com>
8042 Trust PAD types instead of using PAD___XVS.
8043 * ada-lang.c (trust_pad_over_xvs): New static variable.
8044 (ada_is_aligner_type): If !trust_pad_over_xvs and there is a
8045 parallel XVS type, follow the XVS type instead of the PAD type.
8046 (unwrap_value): Make sure that there is no parallel XVE type
8047 before returning the value as is.
8048 (set_ada_list, show_ada_list): New static variables.
8049 (set_ada_command, show_ada_command): New functions.
8050 (_initialize_ada_language): Add new "set/show ada" prefix commands.
8051 Add new "set/show ada trust-PAD-over-XVS" setting.
8053 2010-01-18 Tom Tromey <tromey@redhat.com>
8054 Thiago Jung Bauermann <bauerman@br.ibm.com>
8056 Allow "source" to load python scripts.
8057 * exceptions.h (enum errors): Add UNSUPPORTED_ERROR.
8058 * python/python.c (source_python_script): New function.
8059 * python/python.h (source_python_script): Add declaration.
8060 * cli/cli-cmds.c: #include exceptions.h and python/python.h.
8061 (script_ext_off, script_ext_soft, script_ext_strict)
8062 (script_ext_enums, script_ext_mode): New static constants.
8063 (show_script_ext_mode, find_and_open_script): New functions.
8064 (source_script): Enhance to handle Python scripts.
8065 (init_cli_cmds): Add set/show script-extension commands.
8067 2010-01-16 Stan Shebs <stan@codesourcery.com>
8069 * tracepoint.h (struct trace_status): Use unsigned long long
8071 * tracepoint.c (trace_status_command): Fix printf directive.
8072 (trace_save_command): Check fwrite returns, fix printf directive.
8073 (trace_filename): New global.
8074 (tfile_open): Set it, check read returns.
8075 (tfile_close): Free trace_filename.
8076 (tfile_get_traceframe_address): Check read returns.
8077 (tfile_trace_find): Ditto.
8078 (tfile_fetch_registers): Ditto.
8079 (tfile_xfer_partial): Ditto.
8080 (tfile_get_trace_state_variable_value): Ditto.
8082 2010-01-15 Stan Shebs <stan@codesourcery.com>
8084 Add trace file support.
8085 * tracepoint.h (enum trace_stop_reason): New enum.
8086 (struct trace_status): New struct.
8087 (parse_trace_status): Declare.
8088 (struct uploaded_tp): Move here from remote.c,
8089 add fields for actions.
8090 (struct uploaded_tsv): New struct.
8091 * tracepoint.c (tfile_ops): New target vector.
8092 (trace_fd): New global.
8093 (tfile_open): New function.
8094 (tfile_close): New function.
8095 (tfile_files_info): New function.
8096 (tfile_get_trace_status): New function.
8097 (tfile_get_traceframe_address): New function.
8098 (tfile_trace_find): New function.
8099 (tfile_fetch_registers): New function.
8100 (tfile_xfer_partial): New function.
8101 (tfile_get_trace_state_variable_value): New function.
8102 (init_tfile_ops): New function.
8103 (_initialize_tracepoint): Call it, add tfile target.
8104 (trace_status): New global.
8105 (current_trace_status): New function.
8106 (trace_running_p): Remove, change all users to get from
8107 current_trace_status()->running.
8108 (get_trace_status): Remove.
8109 (trace_status_command): Call target_get_trace_status directly,
8110 report more detail including tracing stop reasons.
8111 (trace_find_command): Always allow tfind on a file.
8112 (trace_find_pc_command): Ditto.
8113 (trace_find_tracepoint_command): Ditto.
8114 (trace_find_line_command): Ditto.
8115 (trace_find_range_command): Ditto.
8116 (trace_find_outside_command): Ditto.
8117 (trace_frames_offset, cur_offset): Declare as off_t.
8118 (trace_regblock_size): Rename from reg_size, update users.
8119 (parse_trace_status): New function.
8120 (tfile_interp_line): New function.
8121 (disconnect_or_stop_tracing): Ensure current trace
8122 status before asking what to do.
8123 (stop_reason_names): New global.
8124 (trace_save_command): New command.
8125 (get_uploaded_tp): Move here from remote.c.
8126 (find_matching_tracepoint): Ditto.
8127 (merge_uploaded_tracepoints): New function.
8128 (parse_trace_status): Use stop_reason_names.
8129 (_initialize_tracepoint): Define tsave command.
8130 * target.h (target_ops): New fields to_save_trace_data,
8131 to_upload_tracepoints, to_upload_trace_state_variables,
8132 to_get_raw_trace_data, change to_get_trace_status
8133 to take a pointer to a status struct.
8134 (target_save_trace_data): New macro.
8135 (target_upload_tracepoints): New macro.
8136 (target_upload_trace_state_variables): New macro.
8137 (target_get_raw_trace_data): New macro.
8138 * target.c (update_current_target): Add new methods, change
8139 signature of to_get_trace_status.
8140 * remote.c (hex2bin): Make globally visible.
8142 (remote_download_trace_state_variable): Download name also.
8143 (remote_get_trace_status): Update parameter, use
8145 (remote_save_trace_data): New function.
8146 (remote_upload_tracepoints): New function.
8147 (remote_upload_trace_state_variables): New function.
8148 (remote_get_raw_trace_data): New function.
8149 (remote_start_remote): Use them.
8150 (_initialize_remote_ops): Add operations.
8151 * ax-gdb.c: Include breakpoint.h.
8152 * breakpoint.c (create_tracepoint_from_upload): Use
8153 break_command_really, return tracepoint, warn about unimplemented
8155 * NEWS: Mention trace file addition.
8157 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
8159 Fix compilation warning on gcc-3.4.
8160 * exec.c (print_section_info): Move the `displacement' variable
8161 initialization to its declaration.
8163 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
8165 * gdb-gdb.py (StructMainTypePrettyPrinter): Fix TYPE_CODE_RANGE
8168 2010-01-15 Eric Botcazou <botcazou@adacore.com>
8170 "info tasks" broken by typedefs in ATCB type definitions.
8171 * ada-lang.c (ada_template_to_fixed_record_type_1): Add call to
8172 ada_check_typedef before retrieving the length of the type for
8175 2010-01-15 Joel Brobecker <brobecker@adacore.com>
8177 Do not use name-based lookup for unconstrained packed arrays.
8178 * ada-lang.c (find_parallel_type_by_descriptive_type):
8179 Limit the fallback to name-based lookups to the case where
8180 the type is a constrained packed array.
8182 2010-01-15 Joel Brobecker <brobecker@adacore.com>
8184 Enhance gdb-gdb.py to handle main_type.type_specific.
8185 * gdb-gdb.py: Print the type-specific part of struct main_type.
8187 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
8189 * configure.ac (AC_CHECK_FUNCS): Check for setrlimit and getrlimit.
8190 * configure: Regenerate.
8191 * config.in: Regenerate.
8192 * utils.c: Include sys/resource.h.
8193 (dump_core, can_dump_core): New.
8194 (internal_vproblem): Update the comment. Check can_dump_core while
8195 setting dump_core_p. Replace two abort calls by dump_core calls.
8197 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8198 Eli Zaretskii <eliz@gnu.org>
8200 * NEWS: Document the PIE support.
8202 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8204 * linux-tdep.c: Remove includes gdbcore.h, observer.h and elf-bfd.h.
8205 (check_is_pie_binary, _initialize_linux_tdep): Remove.
8207 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8209 * solib-svr4.c (svr4_exec_displacement): New comment for entry_point.
8210 Replace exec_entry_point call by bfd_get_start_address.
8212 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8214 Support Valgrind attachments broken by the PIE support.
8215 * auxv.c: Include gdbcore.h.
8216 (procfs_xfer_auxv): Make static. Reduce its comment. Drop its
8217 parameters ops, object and annex. Remove their assertions.
8218 (ld_so_xfer_auxv, memory_xfer_auxv): New function.
8219 * auxv.h (procfs_xfer_auxv): Remove comment. Rename to ...
8220 (memory_xfer_auxv): ... here.
8221 * linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to
8223 * procfs.c (procfs_xfer_partial): Likewise.
8224 * solib-svr4.c (svr4_relocate_main_executable): New prototype.
8225 (svr4_special_symbol_handling): Call svr4_relocate_main_executable.
8226 (svr4_solib_create_inferior_hook): Conditionalize the
8227 svr4_relocate_main_executable call.
8229 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8231 * solib-svr4.c (scan_dyntag): Remove variable dyn_addr. New variable
8232 target_section. Find SECT in current_target_sections, gdb_assert it.
8233 (elf_lookup_lib_symbol): Pass the binary file if given symfile_objfile.
8235 * symtab.c (lookup_objfile_from_block): Return the binary file instead
8236 of separate debug info file.
8238 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8240 Support PIEs with no symfile_objfile.
8241 * exec.c (print_section_info <abfd == exec_bfd>): Relocate Entry point.
8242 * solib-svr4.c (svr4_relocate_main_executable <exec_bfd>): New block.
8244 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8246 * solib-svr4.c (svr4_relocate_main_executable): Move the static exec
8248 (svr4_static_exec_displacement): ... a new function.
8249 (svr4_exec_displacement): New function.
8250 (svr4_relocate_main_executable): Call svr4_exec_displacement. Allocate
8251 new_offsets using alloca now. Remove variable old_chain and changed.
8252 Call objfile_relocate unconditionally now.
8254 2010-01-14 Doug Evans <dje@google.com>
8256 * gdbtypes.c (arch_flags_type): Fix comment.
8257 * gdbtypes.h (arch_composite_type): Fix comment.
8259 2009-01-14 Tristan Gingold <gingold@adacore.com>
8261 * machoread.c (macho_add_oso_symfile): Add symfile_flags parameter.
8262 Call xstrdup for abfd->filename. Pass symfile_flags and objfile flags
8263 to symbol_file_add_from_bfd. Add OSO as separate objfile.
8264 (macho_oso_symfile): Add symfile_flags parameter. Pass it to
8265 macho_add_oso_symfile.
8266 (macho_symfile_read): Pass symfile_flags to macho_oso_symfile.
8268 2010-01-14 Joel Brobecker <brobecker@adacore.com>
8270 Tru64: Dead threads are never deleted.
8271 * dec-thread.c (dec_thread_ptid_is_alive): New function.
8272 (dec_thread_count_gdb_threads): Fix counter increment.
8273 (dec_thread_add_gdb_thread): Fix *listp increment.
8274 (resync_thread_list): Fix bug in deletion of dead threads that
8275 caused all threads to be deleted, instead of just the dead ones.
8277 2010-01-13 Phil Muldoon <pmuldoon@redhat.com>
8281 * python/python-internal.h: Add lazy_string_object_type
8283 (create_lazy_string_object, gdbpy_initialize_lazy_string)
8284 (gdbpy_is_lazystring, gdbpy_extract_lazy_string): Define.
8285 * python/py-value.c (valpy_lazy_string): New function.
8286 (convert_value_from_python): Add lazy string conversion.
8287 * python/py-prettyprint.c (pretty_print_one_value): Check if
8288 return is also a lazy string.
8289 (print_string_repr): Add lazy string printing branch.
8290 (print_children): Likewise.
8291 * python/py-lazy-string.c: New file. Implement lazy strings.
8292 * python/python.c (_initialize_python): Call
8293 gdbpy_initialize_lazy_string.
8294 * varobj.c (value_get_print_value): Add lazy string printing
8295 branch. Account for encoding.
8296 * c-lang.c (c_printstr): Account for new encoding argument. If
8297 encoding is NULL, find encoding suited for type, otherwise use
8299 * language.h (language_defn): Add encoding argument.
8300 (LA_PRINT_STRING): Likewise.
8301 * language.c (unk_lang_printstr): Update to reflect new encoding
8302 argument to language_defn.
8303 * ada-lang.h (ada_printstr): Likewise.
8304 * c-lang.h (c_printstr): Likewise.
8305 * p-lang.h (pascal_printstr);
8306 * f-lang.c (f_printstr): Likewise.
8307 * m2-lang.c (m2_printstr): Likewise.
8308 * objc-lang.c (objc_printstr): Likewise.
8309 * p-lang.c (pascal_printstr): Likewise.
8310 * scm-lang.c (scm_printstr): Likewise.
8311 * c-valprint.c (c_val_print): Update LA_PRINT_STRING call for
8313 * ada-valprint.c (ada_printstr): Likewise.
8314 * f-valprint.c (f_val_print): Likewise
8315 * m2-valprint.c (m2_val_print): Likewise.
8316 * p-valprint.c (pascal_val_print): Likewise.
8317 * expprint.c (print_subexp_standard): Likewise.
8318 * valprint.c (val_print_string): Likewise.
8319 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-lazy-string.
8320 (SUBDIR_PYTHON_SRCS): Likewise.
8321 (py-lazy-string.o): New rule.
8323 2010-01-13 Doug Evans <dje@google.com>
8325 * mi/mi-main.c (list_available_thread_groups): Avoid "may be used
8326 uninitialized" warning from gcc on local `tree'.
8328 2010-01-13 Vladimir Prus <vladimir@codesourcery.com>
8330 Implement core awareness.
8332 * bcache.c (compare_ints): Remove
8333 (print_percentage): Use compare_positive_ints.
8334 * defs.h (compare_positive_ints): Declare.
8335 * linux-nat.h (struct lin_lwp): New field core.
8336 (linux_nat_core_of_thread_1): Declare.
8337 * linux-nat.c (add_lwp): Init the 'core' field.
8338 (linux_nat_wait_1): Record the core.
8339 (linux_nat_core_of_thread_1, linux_nat_core_of_thread): New.
8340 (linux_nat_add_target): Register the above.
8341 * linux-thread-db.c (update_thread_core): New.
8342 (thread_db_find_new_threads): Update core information for
8344 * remote.c (struct private_thread_info): New.
8345 (free_private_thread_info, demand_private_info): New.
8346 (PACKET_qXfer_threads, use_osdata_threads): New.
8347 (struct thread_item, threads_parsing_context
8348 (start_thread, end_thread, thread_attributes)
8349 (thread_children, threads_children, threads_elements): New.
8350 (remote_threads_info): Try qXfer:threads before anything
8352 (remote_protocol_packets): Register qXfer:threads.
8353 (remote_open_1): Init use_osdata_threads.
8354 (struct stop_reply): New field 'core'.
8355 (remote_parse_stop_reply): Parse core number.
8356 (process_stop_reply): Record core number.
8357 (remote_xfer_partial): Handle qXfer:threads.
8358 (remote_core_of_thread): New.
8359 (init_remote_ops): Register remote_core_of_thread.
8360 (_initialize_remote): Register qXfer:read.
8361 * target.c (target_core_of_thread): New
8362 * target.h (enum target_object): New value TARGET_OBJECT_THREADS.
8363 (struct target_ops): New field to_core_of_threads.
8364 (target_core_of_thread): Declare.
8365 * gdbthread.h (struct thread_info): New field private_dtor.
8366 * thread.c (print_thread_info): Report the core.
8367 * ui-out.c (MAX_UI_OUT_LEVELS): Increase.
8368 * utils.c (compare_positive_ints): New.
8369 * features/threads.dtd: New.
8370 * mi/mi-interp.c (mi_on_normal_stop): Report the core.
8371 * mi/mi-main.c (struct collect_cores_data, collect_cores)
8372 (do_nothing, free_vector_of_osdata_items)
8373 (splay_tree_int_comparator, free_splay_tree): New.
8374 (print_one_inferior_data): Implemented printing of selected
8375 inferiors. Collect and print cores.
8376 (output_cores): New.
8377 (mi_cmd_list_thread_groups): Support --recurse. Permit specifying
8378 thread groups together with --available.
8380 2010-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
8382 * configure: Regenerate (for _STRUCTURED_PROC).
8384 2010-01-12 Joel Brobecker <brobecker@adacore.com>
8386 Delete dead function.
8387 * ada-lang.c (extract_string): Delete. No longer used.
8389 2010-01-12 Joel Brobecker <brobecker@adacore.com>
8391 Fix -Wunused warning in dec-thread.c.
8392 * dec-thread.c (dec_thread_count_gdb_threads)
8393 (dec_thread_add_gdb_thread): Prevent -Wunused warning.
8395 2010-01-12 Joel Brobecker <brobecker@adacore.com>
8397 * ada-valprint.c (ada_print_floating): Remove trailing space.
8399 2010-01-12 Joel Brobecker <brobecker@adacore.com>
8401 Add support for DW_AT_GNAT_descriptive_type.
8402 * gdbtypes.h (enum type_specific_kind): New enum.
8403 (struct main_type) [type_specific_field]: New component.
8404 [type_specific]: Add new component "gnat_stuff".
8405 (struct gnat_aux_type): New type.
8406 (INIT_CPLUS_SPECIFIC): Also set TYPE_SPECIFIC_FIELD (type).
8407 (HAVE_CPLUS_STRUCT): Also check TYPE_SPECIFIC_FIELD (type).
8408 (gnat_aux_default, allocate_gnat_aux_type): Add declaration.
8409 (INIT_GNAT_SPECIFIC, ALLOCATE_GNAT_AUX_TYPE, HAVE_GNAT_AUX_INFO)
8410 (TYPE_SPECIFIC_FIELD): New macros.
8411 (TYPE_CPLUS_SPECIFIC): Return cplus_struct_default if the given
8412 type does not hold any cplus-specific data.
8413 (TYPE_RAW_CPLUS_SPECIFIC): New macro.
8414 (TYPE_GNAT_SPECIFIC, TYPE_DESCRIPTIVE_TYPE): New macros.
8415 (TYPE_IS_OPAQUE): Use HAVE_CPLUS_STRUCT to check if type has
8416 cplus-specific data.
8417 * gdbtypes.c (allocate_cplus_struct_type): Minor stylistic rewrite.
8418 Set new component TYPE_SPECIFIC_FIELD (type).
8419 (gnat_aux_default): New constant.
8420 (allocate_gnat_aux_type): New function.
8421 (init_type): Add initialization the type-specific stuff for
8422 TYPE_CODE_FLT and TYPE_CODE_FUNC types.
8423 (print_gnat_stuff): New function.
8424 (recursive_dump_type): Use HAVE_CPLUS_STRUCT to check for cplus-
8425 specific data. Adjust code that prints the contents of the
8426 type-specific union using the TYPE_SPECIFIC_FIELD value.
8427 * dwarf2read.c (dwarf2_attach_fields_to_type): Do not allocate
8428 the type cplus stuff for Ada types.
8429 (dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
8430 Error out if these routines are called with an Ada type.
8431 (read_structure_type, read_array_type, read_subrange_type):
8432 Add call to set_descriptive_type.
8433 (set_die_type): Initialize the gnat-specific data if necessary.
8434 (need_gnat_info, die_descriptive_type, set_descriptive_type):
8436 * ada-lang.c (decode_constrained_packed_array_type): Use
8437 decode_constrained_packed_array_type instead of doing a standard
8438 lookup to locate a parallel type.
8439 (find_parallel_type_by_descriptive_type): New function.
8440 (ada_find_parallel_type_with_name): New function.
8441 (ada_find_parallel_type): Reimplement using
8442 ada_find_parallel_type_with_name.
8443 * ada-valprint.c (print_field_values): Use HAVE_CPLUS_STRUCT
8444 to check if type has a cplus stuff.
8445 * linespec.c (total_number_of_methods): Likewise.
8446 * mdebugread.c (new_type): Likewise.
8448 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8450 * NEWS: Document the 0b binary number prefix parsing.
8452 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8454 * objfiles.c (objfile_relocate1): Change the return type to int.
8455 Describe the new return value. Return non-zero if data changed.
8456 (objfile_relocate): New variable changed. Set it. Call
8457 breakpoint_re_set depending on CHANGED.
8459 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8461 Implement binary numbers parsing.
8462 * c-exp.y (parse_number): New case 'b' and 'B'.
8464 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8465 Tristan Gingold <gingold@adacore.com>
8467 * solib.c (info_sharedlibrary_command): Replace
8468 objfile_has_partial_symbols and objfile_has_full_symbols calls by
8469 objfile_has_symbols.
8471 2010-01-10 Joel Brobecker <brobecker@adacore.com>
8473 * NEWS: Document the improvements made to the mips-irix port.
8475 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8477 Fix the documentation of valprint.c:value_print.
8478 * valprint.c (value_print): Update the function description to
8479 mention that the syntax of the output follows the current_language,
8482 2010-01-09 Jan Kratochvil <jan.kratochvil@redhat.com>
8484 Fix displacement of separate debug info files.
8485 * objfiles.c (objfile_relocate): Rename to ...
8486 (objfile_relocate1): ... here and make it static. Extend the comment.
8487 (objfile_relocate): New function.
8488 * solib-spu.c (spu_relocate_main_executable): Explicitly check if
8489 SYMFILE_OBJFILE is NULL. Remove variables objfile and old_chain.
8490 Remove following of SEPARATE_DEBUG_OBJFILE. new_offsets is now
8491 allocated using alloca.
8492 * symfile.c (copy_section_addr_info): Remove.
8493 (build_section_addr_info_from_objfile): Make it global. New variables
8494 addr_bit and mask, use them.
8495 * symfile.h (build_section_addr_info_from_objfile): New prototype.
8496 (copy_section_addr_info): Remove.
8498 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8500 Signal unwinder for mips-irix N32.
8501 * mips-irix-tdep.c: #include mips-tdep.h, trad-frame.h, and
8503 (SIGTRAMP_FRAME_SIZE, SIGCONTEXT_PC_OFF, SIGCONTEXT_REGS_OFF)
8504 (SIGCONTEXT_FPREGS_OFF, SIGCONTEXT_FPCSR_OFF, SIGCONTEXT_HI_OFF)
8505 (SIGCONTEXT_LO_OFF): New macros.
8506 (mips_irix_n32_tramp_frame_init): New function.
8507 (mips_irix_n32_tramp_frame): New static constant.
8508 (mips_irix_init_abi): Prepend the mips_irix_n32_tramp_frame unwinder.
8510 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8512 Breakpoint in shared library does not work on mips-irix.
8513 * procfs.c: #include "observer.h".
8514 (procfs_inferior_created): New function, moving here the code
8515 which unsets the syssgi syscall-exit notifications.
8516 (procfs_create_inferior): Remove the code which unsets the syssgi
8517 syscall-exit notifications. It is too early to do this here.
8518 (_initialize_procfs): Attach the procfs_inferior_created observer.
8520 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8522 Wrong return convention for arrays (mips-irix).
8523 * mips-tdep.c (mips_n32n64_return_value): Arrays whose size is
8524 128 bits or smaller are returned the same way as structs
8525 and unions of the the same size.
8527 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8529 Cannot set the PC on mips-irix.
8530 * irix5-nat.c (fill_gregset): Check regno against the raw PC
8531 register number, no the cooked one.
8533 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8535 Error while loading core file on mips-irix.
8536 * solib-irix.c (irix_solib_create_inferior_hook): Do nothing
8537 if debugging from a core file.
8539 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8541 GDB hangs when attaching to process on mips-irix.
8542 * solib-irix.c (irix_solib_create_inferior_hook): Do nothing if
8543 attaching to a process.
8545 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8547 Use the correct breakpoint instruction on mips-irix.
8548 * mips-tdep.c (mips_breakpoint_from_pc): Add new static variable
8549 containing the correct breakpoint instruction to use on mips-irix.
8550 Use it when the osabi is GDB_OSABI_IRIX.
8552 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8554 -Wunused warning in procfs.c (mips-irix only).
8555 * procfs.c (gdb_praddset, gdb_prdelset): New macros. Use them
8556 throughout instead of using praddset and prdelset respectively.
8558 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8560 GDB crash while stepping into function.
8561 * infrun.c (handle_inferior_event): Refetch the current frame
8562 after handling what.main_action, in case that pointer became
8565 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8567 Fix build failure of solaris-hosted cross debuggers.
8568 * ada-valprint.c, parse.c: Include defs.h before including ctype.h.
8570 2010-01-09 Daniel Gutson <dgutson@codesourcery.com>
8572 Fix build failure on sparc-solaris.
8573 * procfs.c: (procfs_do_thread_registers) Use elfcore_write_lwpstatus.
8575 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
8577 Move some symfile code into subroutines.
8578 * symfile.h (relative_addr_info_to_section_offsets)
8579 (addr_info_make_relative): New prototypes.
8580 * symfile.c (default_symfile_offsets): Move a part to ...
8581 (relative_addr_info_to_section_offsets): ... this new function.
8582 (default_symfile_offsets): Call it.
8583 (syms_from_objfile <!mainline && addrs && addrs->other[0].name>): Move
8585 (addr_info_make_relative): ... this new function.
8587 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
8589 Add from_tty to solib_create_inferior_hook.
8590 * infcmd.c (post_create_inferior): Move solib_add after
8591 solib_create_inferior_hook. Pass from_tty to
8592 solib_create_inferior_hook. Call solib_add and SOLIB_ADD with
8593 0 from_tty and comment why.
8594 * infrun.c (follow_exec): Pass from_tty solib_create_inferior_hook as 0.
8595 * linux-nat.c (linux_child_follow_fork): Likewise.
8596 * nto-procfs.c (procfs_post_attach, procfs_create_inferior): Likewise.
8597 * solib-darwin.c (darwin_solib_create_inferior_hook): New parameter
8599 * solib-frv.c (frv_solib_create_inferior_hook): Likewise.
8600 * solib-irix.c (irix_solib_create_inferior_hook): Likewise.
8601 * solib-null.c (null_solib_create_inferior_hook): Likewise.
8602 * solib-osf.c (osf_solib_create_inferior_hook): Likewise.
8603 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
8604 * solib-som.c (som_solib_create_inferior_hook): Likewise.
8605 * solib-spu.c (spu_solib_create_inferior_hook): New parameter from_tty.
8606 Pass it to svr4_so_ops.solib_create_inferior_hook.
8607 * solib-sunos.c (sunos_solib_create_inferior_hook): New parameter
8609 * solib-svr4.c (enable_break): New parameter from_tty. Pass it to
8611 (svr4_solib_create_inferior_hook): New parameter from_tty. Pass it to
8613 * solib-target.c (solib_target_solib_create_inferior_hook): New
8615 * solib.c (solib_create_inferior_hook): New parameter from_tty. Pass
8616 it to ops->solib_create_inferior_hook.
8617 (reload_shared_libraries): Pass from_tty to solib_create_inferior_hook.
8618 Move solib_add after solib_create_inferior_hook, call it now with
8619 from_tty as 0. New comment there.
8620 * solib.h (solib_create_inferior_hook): New parameter from_tty.
8621 * solist.h (struct target_so_ops <solib_create_inferior_hook>):
8624 2010-01-08 Vladimir Prus <vladimir@codesourcery.com>
8627 * infrun.c (handle_inferior_event): Use get_thread_regcache
8628 with events ptid, not get_current_regcache.
8630 2009-01-08 Joel Brobecker <brobecker@adacore.com>
8632 GDB crash with empty executable name (MinGW).
8633 * source.c (openp): Add assert that parameter string is not NULL.
8634 if parameter string is an empty string, then return with a failure
8637 2009-01-08 Joel Brobecker <brobecker@adacore.com>
8639 Get rid of support for VAX Floats.
8640 * ada-lang.h (ada_is_vax_floating_type, ada_vax_float_type_suffix)
8641 (ada_vax_float_print_function): Delete.
8642 * ada-lang.c (ada_is_vax_floating_type, ada_vax_float_type_suffix)
8643 (ada_vax_float_print_function): Delete.
8644 * ada-typeprint.c (print_vax_floating_point_type): Delete.
8645 (ada_print_type): Remove support for VAX floats.
8646 * ada-valprint.c (ada_val_print_1): Remove support for VAX floats.
8648 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
8650 * stabsread.c (read_args): Handle zero arguments.
8652 2009-01-08 Joel Brobecker <brobecker@adacore.com>
8654 Cannot find in-tree libiconv.a after reconfigure.
8655 * acinclude.m4 (AM_ICONV): If we find an in-tree libiconv.a
8656 that we can use, then cache the path to this archive.
8657 * configure: Regenerate.
8659 2010-01-07 Stan Shebs <stan@codesourcery.com>
8661 Make tracepoint operations go through target vector.
8662 * target.h (enum trace_find_type): New enum.
8663 (struct target_ops): New fields to_trace_init,
8664 to_download_tracepoint, to_download_trace_state_variable,
8665 to_trace_set_readonly_regions, to_trace_start, to_get_trace_status,
8666 to_trace_stop, to_trace_find, to_get_trace_state_variable_value,
8667 to_set_disconnected_tracing.
8668 (target_trace_init): New macro.
8669 (target_download_tracepoint): New macro.
8670 (target_download_trace_state_variable): New macro.
8671 (target_trace_start): New macro.
8672 (target_trace_set_readonly_regions): New macro.
8673 (target_get_trace_status): New macro.
8674 (target_trace_stop): New macro.
8675 (target_trace_find): New macro.
8676 (target_get_trace_state_variable_value): New macro.
8677 (target_set_disconnected_tracing): New macro.
8678 * target.c (update_current_target): Inherit and set defaults for
8679 tracepoint operations.
8680 * tracepoint.c (default_collect): Make globally visible.
8681 (target_is_remote): Remove, along with all calls.
8682 (tvariables_info): Call target_get_trace_state_variable_value.
8683 (remote_set_transparent_ranges): Remove.
8684 (trace_start_command): Call target_trace_init,
8685 target_download_tracepoint, etc.
8686 (download_tracepoint): Remove.
8687 (trace_stop_command): Simplify.
8688 (stop_tracing): Call target_trace_stop.
8689 (get_trace_status): Call target_get_trace_status.
8690 (trace_status_command): Add case for targets that cannot trace.
8691 (finish_tfind_command): Change to take numerical arguments, call
8693 (trace_find_command): Update call to finish_tfind_command.
8694 (trace_find_pc_command): Ditto.
8695 (trace_find_tracepoint_command): Ditto.
8696 (trace_find_line_command): Ditto.
8697 (trace_find_range_command): Ditto.
8698 (trace_find_outside_command): Ditto.
8699 (set_disconnected_tracing_value): Call
8700 target_set_disconnected_tracing.
8701 * remote.c: Add protocol encoding bits from tracepoint.c.
8702 (trace_error): Move from tracepoint.c.
8703 (remote_get_noisy_reply): Ditto.
8704 (free_actions_list_cleanup_wrapper): Ditto.
8705 (free_actions_list): Ditto.
8706 (remote_trace_init): New function.
8707 (remote_download_tracepoint): New function.
8708 (remote_download_trace_state_variable): New function.
8709 (remote_trace_set_readonly_regions): New function.
8710 (remote_trace_start): New function.
8711 (remote_get_trace_status): New function.
8712 (remote_trace_stop): New function.
8713 (remote_trace_find): New function.
8714 (remote_download_trace_state_variable): New function.
8715 (remote_set_disconnected_tracing): New function.
8716 (init_remote_ops): Add tracepoint operations.
8718 * tracepoint.c (trace_dump_command): Don't decr_pc_after_break.
8720 2010-01-07 Tristan Gingold <gingold@adacore.com>
8722 * symfile.c (build_section_addr_info_from_objfile): New function.
8723 (symbol_file_add_separate): Don't use offsets from objfile but
8726 2010-01-06 Stan Shebs <stan@codesourcery.com>
8728 Support disconnected tracing.
8729 * infcmd.c (detach_command): Ask whether to stop tracing.
8730 * cli/cli-cmds.c (quit_command): Ditto.
8731 * breakpoint.h (struct breakpoint): New field number_on_target.
8732 * breakpoint.c (create_tracepoint_from_upload): New function.
8733 (get_tracepoint_by_number_on_target): New function.
8734 * remote.c (struct remote): New field disconnected_tracing.
8735 (remote_disconnected_tracing_feature): New function.
8736 (remote_protocol_features): Add DisconnectedTracing.
8737 (struct uploaded_tp): New struct.
8738 (uploaded_tps): New global.
8739 (get_uploaded_tp): New function.
8740 (find_matching_tracepoint): New function.
8741 (remote_get_tracing_state): New function.
8742 (remote_start_remote): Call it.
8743 * tracepoint.c (disconnected_tracing): New global.
8744 (trace_start_command): Initialize number_on_target.
8745 (stop_tracing): New function, split out from...
8746 (trace_stop_command): Call stop_tracing.
8747 (get_trace_status): New function, split out from...
8748 (trace_status_command): Call get_trace_status, add info on
8749 disconnection behavior.
8750 (disconnect_or_stop_tracing): New function.
8751 (finish_tfind_command): Translate from number on target.
8752 (trace_find_tracepoint_command): Translate to number on target.
8753 (send_disconnected_tracing_value): New function.
8754 (set_disconnected_tracing): New function.
8755 (_initialize_tracepoint): Add disconnected-tracing variable.
8756 * NEWS: Mention disconnected tracing.
8758 2010-01-06 Tristan Gingold <gingold@adacore.com>
8760 * symtab.c (lookup_global_symbol_from_objfile): Rename objfile
8761 parameter to main_objfile. Iterate on all separate debug objfiles.
8762 * symfile.h (symbol_file_add_separate)
8763 (find_separate_debug_file_by_debuglink): Remove parameter names.
8764 * symfile.c (symbol_file_add_separate): Use add_separate_objfile.
8765 (reread_symbols): Use free_objfile_separate_debug.
8766 * objfiles.h (struct objfile): Add separate_debug_objfile_link.
8768 (objfile_separate_debug_iterate, add_separate_debug_objfile)
8769 (free_objfile_separate_debug): New prototypes.
8770 * objfiles.c (objfile_separate_debug_iterate): New function.
8771 (add_separate_debug_objfile, free_objfile_separate_debug): New
8773 (free_objfile): Use free_objfile_separate_debug. Adjust for
8774 multiple separate debug objfile.
8775 (objfile_has_symbols): Adjust comment. Iterate on all separate
8777 * minsyms.c (lookup_minimal_symbol): Adjust for multiple separate
8779 (lookup_minimal_symbol_text): Ditto.
8780 (lookup_minimal_symbol_by_pc_name): Ditto.
8781 (lookup_minimal_symbol_solib_trampoline): Ditto.
8782 (lookup_minimal_symbol_by_pc_section_1): Iterate on all separate
8785 2010-01-05 Stan Shebs <stan@codesourcery.com>
8787 Add fast tracepoints.
8788 * arch-utils.h (default_fast_tracepoint_valid_at): Declare.
8789 * arch-utils.c (default_fast_tracepoint_valid_at): New function.
8790 * breakpoint.h (enum bptype): Add bp_fast_tracepoint.
8791 * breakpoint.c (tracepoint_type): New function.
8792 (ALL_TRACEPOINTS): Use it.
8793 (should_be_inserted): Ditto.
8794 (bpstat_check_location): Ditto.
8795 (print_one_breakpoint_location): Ditto.
8796 (user_settable_breakpoint): Ditto.
8797 (set_breakpoint_location_function): Ditto.
8798 (disable_breakpoints_in_shlibs): Ditto.
8799 (delete_trace_command): Ditto.
8800 (print_it_typical): Add bp_fast_tracepoint case.
8801 (bpstat_what): Ditto.
8802 (print_one_breakpoint_location): Ditto.
8803 (allocate_bp_location): Ditto.
8805 (breakpoint_re_set_one): Ditto.
8806 (disable_command): Ditto.
8807 (enable_command): Ditto.
8808 (check_fast_tracepoint_sals): New function.
8809 (break_command_really): Call it.
8810 (ftrace_command): New function.
8811 (_initialize_breakpoint): Add ftrace command.
8812 * gdbarch.sh (fast_tracepoint_valid_at): New.
8813 * gdbarch.h, gdbarch.c: Regenerate.
8814 * i386-tdep.c (i386_fast_tracepoint_valid_at): New function.
8815 (i386_gdbarch_init): Use it.
8816 * remote.c (struct remote_state): New field fast_tracepoints.
8817 (PACKET_FastTracepoints): New packet config type.
8818 (remote_fast_tracepoint_feature): New function.
8819 (remote_protocol_features): Add FastTracepoints.
8820 (remote_supports_fast_tracepoints): New function.
8821 (_initialize_remote): Add FastTracepoints.
8822 * tracepoint.c (download_tracepoint): Add fast tracepoint option.
8823 * NEWS: Mention fast tracepoints.
8825 2010-01-06 Joel Brobecker <brobecker@adacore.com>
8827 * gdb-gdb.py: New file.
8829 2010-01-05 Michael Snyder <msnyder@vmware.com>
8831 * infrun.c (handle_inferior_event): Fix typo in comment.
8833 2010-01-05 Jan Kratochvil <jan.kratochvil@redhat.com>
8835 * symfile.c (syms_from_objfile): Remove the !MAINLINE conditional.
8837 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
8839 * features/Makefile (WHICH): Add s390-linux32, s390-linux64,
8841 (s390-linux32-expedite): Define.
8842 (s390-linux64-expedite): Define.
8843 (s390x-linux64-expedite): Define.
8844 * features/s390-acr.xml: New file.
8845 * features/s390-fpr.xml: New file.
8846 * features/s390-core32.xml: New file.
8847 * features/s390-core64.xml: New file.
8848 * features/s390x-core64.xml: New file.
8849 * features/s390-linux32.xml: New file.
8850 * features/s390-linux64.xml: New file.
8851 * features/s390x-linux64.xml: New file.
8852 * features/s390-linux32.c: New generated file.
8853 * features/s390-linux64.c: New generated file.
8854 * features/s390x-linux64.c: New generated file.
8856 * regformats/s390-linux32.dat: New generated file.
8857 * regformats/s390-linux64.dat: New generated file.
8858 * regformats/s390x-linux64.dat: New generated file.
8859 * regformats/reg-s390.dat: Remove.
8860 * regformats/reg-s390x.dat: Remove.
8862 * s390-nat.c: Include "auxv.h" and <elf.h>.
8863 (HWCAP_S390_HIGH_GPRS): Define if undefined.
8864 (s390_target_wordsize): New function.
8865 (s390_auxv_parse): Likewise.
8866 (s390_get_hwcap): Likewise.
8867 (s390_read_description): Likewise.
8868 (_initialize_s390_nat): Install s390_auxv_parse and
8869 s390_read_description.
8871 * s390-tdep.c: Include "features/s390-linux32.c",
8872 "features/s390-linux64.c", and "features/s390x-linux64.c".
8873 (struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
8874 (s390_register_call_saved): New function.
8875 (s390_register_name): Remove.
8876 (s390_register_type): Remove.
8877 (s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
8878 (s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
8879 (s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
8880 (s390_pseudo_register_name): New function.
8881 (s390_pseudo_register_type): New function.
8882 (s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
8883 Handle full GPR pesudos and varying pseudo register numbers.
8884 (s390_pseudo_register_write): Likewise
8885 (s390x_pseudo_register_read): Remove.
8886 (s390x_pseudo_register_write): Likewise.
8887 (s390_register_group): Remove.
8888 (s390_pseudo_register_group): New function.
8889 (s390_regmap_gregset): Add GPR upper halves.
8890 (s390x_regmap_gregset): Likewise.
8891 (s390_regmap_fpregset): Likewise.
8892 (s390_regmap_upper): New global variable.
8893 (s390_upper_regset): New global variable.
8894 (s390_upper_regset_sections): New global variable.
8895 (s390_regset_from_core_section): Handle GPR upper halves.
8896 (s390_core_read_description): New function.
8897 (s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
8898 register information. Handle varying pseudo register numbers.
8899 (s390_backchain_frame_unwind_cache): Likewise.
8900 (s390_frame_prev_register): Unwind full GPRs to show lower halves.
8901 (s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
8902 (s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
8903 PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
8904 Handle varying pseudo register numbers.
8905 (s390_unwind_pc): Handle varying pseudo register numbers.
8906 (s390_dwarf2_prev_register): New function.
8907 (s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
8908 register information. Handle varying pseudo register numbers.
8909 Install s390_dwarf2_prev_register to unwind full GPRs.
8910 (s390_gdbarch_init): Handle target descriptions. Assign varying
8911 pseudo register numbers. Install s390_adjust_frame_regnum.
8912 (_initialize_s390_tdep): Initialize target descriptions.
8914 * s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
8915 (S390_NUM_REGS): Redefine to include upper half registers.
8916 (S390_PC_REGNUM, S390_CC_REGNUM): Remove.
8917 (S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
8918 (tdesc_s390_linux32): Add declaration.
8919 (tdesc_s390_linux64): Likewise.
8920 (tdesc_s390x_linux64): Likewise.
8922 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
8924 * regset.h (struct core_regset_section): Add HUMAN_NAME.
8925 * i386-linux-tdep.c (i386_linux_regset_sections): Fill in HUMAN_NAME.
8926 * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections): Likewise.
8927 (ppc_linux_vmx_regset_sections): Likewise.
8928 (ppc_linux_fp_regset_sections): Likewise.
8930 * corelow.c (get_core_register_section): Constify arguments.
8931 (get_core_registers): Use gdbarch_core_regset_sections instead
8932 of hard-coded platform-specific register section names.
8934 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
8936 * dwarf2loc.c (read_pieced_value): If a piece occupies part of
8937 a register, assume the least-significant part is used.
8938 (write_pieced_value): Likewise.
8940 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
8942 * printcmd.c: Include "arch-utils.h".
8943 (do_one_display): Re-parse expression if current architecture changed.
8945 2010-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
8946 Joel Brobecker <brobecker@adacore.com>
8948 * gdbtypes.c (check_typedef): New comment on type length.
8949 * value.c (allocate_value_lazy): Remove the unused atype variable. New
8950 comment on type length.
8951 (value_primitive_field): Keep the original TYPE value, new comment.
8953 2010-01-01 Jan Kratochvil <jan.kratochvil@redhat.com>
8955 * cli/cli-script.c (process_next_line): Rename p1 as p_end and p2 as
8956 p_start. Change != comparisons to > and < comparisons.
8958 2010-01-01 Jan Kratochvil <jan.kratochvil@redhat.com>
8960 * cli/cli-script.c (process_next_line): Check P2 overrun.
8962 2009-01-01 Joel Brobecker <brobecker@adacore.com>
8964 Update the copyright hearder to add year 2010 for most GDB files.
8966 2009-01-01 Joel Brobecker <brobecker@adacore.com>
8968 Fix build failure in inf-ptrace.c.
8969 * inf-ptrace.c (inf_ptrace_follow_fork): Fix typo.
8971 2010-01-01 Joel Brobecker <brobecker@adacore.com>
8973 * top.c (print_gdb_version): Update copyright year.
8975 2010-01-01, 10 Joel Brobecker <brobecker@adacore.com>
8977 Fix break *FUN'address thread NUM.
8978 * ada-lex.l (task): Expand rule to also match the thread keyword.
8980 2010-01-01 Joel Brobecker <brobecker@adacore.com>
8982 Fix break *FUN'address task NUM.
8983 * ada-lex.l (task): New rule.
8984 * ada-lang.c (valid_task_id): Make sure the Ada task list has
8985 been built before using it.
8987 For older changes see ChangeLog-2009.
8993 version-control: never
projects / deliverable / binutils-gdb.git / blob