gdb/ChangeLog

   1 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
   2
   3         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
   4         offset on little-endian when passing _Decimal32.
   5         (ppc64_sysv_abi_return_value_base): Likewise for return values.
   6
   7 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
   8
   9         * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
  10         of the overlapped FP register within the VSX register on little-
  11         endian platforms.
  12         (efpr_pseudo_register_write): Likewise.
  13
  14 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  15
  16         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
  17         offset on little-endian when passing small structures.
  18
  19 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  20
  21         * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
  22         (struct ppc64_sysv_argpos): New data structure.
  23         (ppc64_sysv_abi_push_float): Remove.
  24         (ppc64_sysv_abi_push_val): New function.
  25         (ppc64_sysv_abi_push_integer): Likewise.
  26         (ppc64_sysv_abi_push_freg): Likewise.
  27         (ppc64_sysv_abi_push_vreg): Likewise.
  28         (ppc64_sysv_abi_push_param): Likewise.
  29         (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
  30         (ppc64_sysv_abi_return_value_base): New function.
  31         (ppc64_sysv_abi_return_value): Refactor to use it.
  32
  33 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  34
  35         * NEWS: Document new target powerpc64le-*-linux*.
  36
  37 2014-02-04  Mark Kettenis  <kettenis@gnu.org>
  38
  39         * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
  40         (sparc64obsd_supply_gregset): Handle registers sets used in ELF
  41         core dumps.
  42         (sparc64obsd_init_abi): Adjust minimum size of the general purpose
  43         register set used in ELF core dumps.  Add floating-point register set.
  44
  45 2014-02-03  Kevin Buettner  <kevinb@redhat.com>
  46
  47         * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
  48         dwarf2_to_gdb[] table using symbolic constants.  Adjust
  49         penultimate entry from number representing the PC register
  50         to symbolic constant representing the MDR register.  Add
  51         constant for the PC register to the end of the table.
  52
  53 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
  54
  55         * bsd-kvm.c: Include <sys/param.h>
  56
  57 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
  58
  59         * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
  60
  61 2014-01-31  Joel Brobecker  <brobecker@adacore.com>
  62
  63         * ada-lang.h (clear_ada_sym_cache): Delete.
  64
  65 2014-01-30  Ulrich Weigand  <uweigand@de.ibm.com>
  66
  67         * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
  68
  69 2014-01-29  Jose E. Marchesi  <jose.marchesi@oracle.com>
  70
  71         * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
  72           the sigreturn register save area only if the syscall is
  73           sigreturn.
  74
  75 2014-01-29  Joel Brobecker  <brobecker@adacore.com>
  76
  77         * valops.c (value_slice): Minor reformatting.
  78
  79 2014-01-28  Ulrich Weigand  <uweigand@de.ibm.com>
  80
  81         * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
  82
  83 2014-01-28  Joel Brobecker  <brobecker@adacore.com>
  84
  85         * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
  86         New static globals.
  87         (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
  88         (ada_ignore_descriptive_types_p): New static global.
  89         (find_parallel_type_by_descriptive_type): Return immediately
  90         if ada_ignore_descriptive_types_p is set.
  91         (_initialize_ada_language): Register new commands "maintenance
  92         set ada", "maintenance show ada", "maintenance set ada
  93         ignore-descriptive-types" and "maintenance show ada
  94         ignore-descriptive-types".
  95         * NEWS: Add entry for new "maint ada set/show
  96         ignore-descriptive-types" commands.
  97
  98 2014-01-27  Markus Metzger  <markus.t.metzger@intel.com>
  99
 100         * record-btrace.c (record_btrace_close): Call btrace_teardown
 101         for all threads.
 102
 103 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 104
 105         * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
 106         "ui-out.h".
 107
 108 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 109
 110         * ada-typeprint (type_is_full_subrange_of_target_type):
 111         New function.
 112         (print_range): Add parameter bounds_prefered_p.  If not set,
 113         try printing range types using the name of their base type.
 114         (print_range_type): Add parameter bounds_prefered_p.
 115         Use it in call to print_range.
 116         (print_array_type, ada_print_type): Update calls to print_range
 117         and print_range_type.
 118
 119 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 120
 121         * ada-typeprint.c (print_array_type, print_choices, print_range)
 122         (print_range_bound, print_dynamic_range_bound, print_range_type):
 123         Remove declaration.
 124
 125 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 126
 127         * ada-typeprint.c (print_range): Add missing empty line
 128         after local declaration.
 129
 130 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 131
 132         * ada-valprint.c (print_optional_low_bound): Get index_type's
 133         target type for as long as it is a TYPE_CODE_RANGE.
 134
 135 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 136
 137         * procfs.c (procfs_make_note_section): Remove assertion and
 138         associated comment.
 139
 140 2014-01-24  Yao Qi  <yao@codesourcery.com>
 141
 142         * remote.c (remote_read_bytes): Change type of len to ULONGEST.
 143         * corelow.c (get_core_siginfo): Likewise.
 144
 145 2014-01-24  Yao Qi  <yao@codesourcery.com>
 146
 147         * remote.c (remote_write_bytes_aux): Change type of 'len' to
 148         ULONGEST.  Don't check 'len' is negative.
 149         (remote_write_bytes):  Change type of 'len' to ULONGEST.
 150
 151 2014-01-23  Tom Tromey  <tromey@redhat.com>
 152
 153         PR python/16485:
 154         * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
 155         Handle exception from frame.block.
 156         (FrameVars.fetch_frame_locals): Likewise.
 157
 158 2014-01-23  Tom Tromey  <tromey@redhat.com>
 159
 160         PR python/16487:
 161         * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
 162         on a NULL pointer.  Move "goto error" to correct place.
 163
 164 2014-01-23  Tom Tromey  <tromey@redhat.com>
 165
 166         PR python/16491:
 167         * python/py-framefilter.c (apply_frame_filter): Call
 168         ensure_python_env after computing gdbarch.
 169
 170 2014-01-23  Yao Qi  <yao@codesourcery.com>
 171
 172         * target.c (raw_memory_xfer_partial): Change argument type
 173         from void * to gdb_byte *.
 174         (memory_xfer_partial_1, memory_xfer_partial): Likewise.
 175
 176 2014-01-22  Doug Evans  <dje@google.com>
 177
 178         New gdbserver option --debug-format=timestamp.
 179         * NEWS: Mention it.
 180
 181 2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>
 182
 183         * syscalls/s390x-linux.xml: New file.
 184         * syscalls/s390-linux.xml: New file.
 185         * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
 186         (XML_SYSCALL_FILENAME_S390X): Likewise.
 187         (op_svc): New enum value for SVC opcode.
 188         (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
 189         (s390_linux_get_syscall_number): New function.
 190         (s390_gdbarch_init): Register '*get_syscall_number' and the
 191         syscall xml file name.
 192         * data-directory/Makefile.in (SYSCALLS_FILES): Add
 193         "s390-linux.xml" and "s390x-linux.xml".
 194         * NEWS: Announce new feature.
 195
 196 2014-01-22  Baruch Siach  <baruch@tkos.co.il>
 197
 198         * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
 199
 200 2014-01-22  Pedro Alves  <palves@redhat.com>
 201
 202         * xtensa-config.c: Include defs.h.
 203
 204 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
 205
 206         * common/common-utils.h: Add "ARI:" comment beside __func__
 207         reference.
 208
 209 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
 210
 211         * common/common-utils.h (FUNCTION_NAME): Expand the macro's
 212         documentation a bit.
 213
 214 2014-01-21  Roland McGrath  <mcgrathr@google.com>
 215
 216         * configure.ac: Call AM_PROG_INSTALL_STRIP.
 217         * configure: Regenerate.
 218         * aclocal.m4: Regenerate.
 219         * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
 220         New substituted variables.
 221         (install-strip): New target.
 222         (INSTALL_SCRIPT): New substituted variable.
 223         (FLAGS_TO_PASS): Add it.
 224         (install-only): Use $(INSTALL_SCRIPT) rather than
 225         $(INSTALL_PROGRAM) for gcore.
 226
 227 2014-01-20  Tom Tromey  <tromey@redhat.com>
 228
 229         * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
 230         together.
 231
 232 2014-01-20  Tom Tromey  <tromey@redhat.com>
 233
 234         * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
 235         (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
 236         (deprecated_cmd_warning, complete_on_cmdlist): Update.
 237         * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
 238         (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
 239         (struct cmd_list_element) <flags>: Remove.
 240         <cmd_deprecated, deprecated_warn_user, malloced_replacement,
 241         doc_allocated>: New fields.
 242         <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
 243         bitfields.
 244         * maint.c (maintenance_do_deprecate): Update.
 245         * top.c (execute_command): Update.
 246
 247 2014-01-20  Baruch Siach  <baruch@tkos.co.il>
 248
 249         * xtensa-linux-nat.c: Include asm/ptrace.h.
 250
 251 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 252
 253         * Makefile.in (SFILES): Add d-support.c.
 254         (COMMON_OBS): Add d-support.o.
 255         * d-lang.h (d_parse_symbol): Add comment, now defined in
 256         d-support.c.
 257         * d-lang.c (parse_call_convention)
 258         (parse_attributes, parse_function_types)
 259         (parse_function_args, parse_type, parse_identifier)
 260         (call_convention_p, d_parse_symbol): Move functions to ...
 261         * d-support.c: ... New file.
 262
 263 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 264
 265         * d-lang.h (d_parse_symbol): Add declaration.
 266         * d-lang.c (extract_identifiers)
 267         (extract_type_info): Remove functions.
 268         (parse_call_convention, parse_attributes)
 269         (parse_function_types, parse_function_args)
 270         (parse_type, parse_identifier, call_convention_p)
 271         (d_parse_symbol): New functions.
 272         (d_demangle): Use d_parse_symbol to demangle D symbols.
 273
 274 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 275
 276         * d-lang.h (struct builtin_d_type): New data type.
 277         (builtin_d_type): Add declaration.
 278         * d-lang.c (d_language_arch_info, build_d_types)
 279         (builtin_d_type): New functions.
 280         (enum d_primitive_types): New data type.
 281         (d_language_defn): Change c_language_arch_info to
 282         d_language_arch_info.
 283         (d_type_data): New static variable.
 284         (_initialize_d_language): Initialize d_type_data.
 285
 286 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 287
 288         * d-lang.h (d_main_name): Add declaration.
 289         * d-lang.c (d_main_name): New function.
 290         * symtab.c (find_main_name): Add call to d_main_name.
 291
 292 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 293
 294         * d-lang.c (d_language_defn): Change macro_expansion_c to
 295         macro_expansion_no.
 296
 297 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 298
 299         * MAINTAINERS: Add myself as a write-after-approval maintainer.
 300
 301 2014-01-17  Sergio Durigan Junior  <sergiodj@redhat.com>
 302
 303         * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
 304         gdb_exception" declaration.
 305         * remote.c (getpkt_or_notif_sane): Likewise.
 306
 307 2014-01-17  Doug Evans  <dje@google.com>
 308
 309         * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
 310         function, contents of dirnames_to_char_ptr_vec_append moved here.
 311         (delim_string_to_char_ptr_vec): New function.
 312         (dirnames_to_char_ptr_vec_append): Rewrite.
 313         * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
 314
 315 2014-01-17  Doug Evans  <dje@google.com>
 316
 317         * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
 318         and moved here ...
 319         * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
 320         #include "common-utils.h".
 321         (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
 322         * common/vec.h (VEC_ASSERT_PASS): Update.
 323         * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
 324         (MACH_CHECK_ERROR): Update.
 325
 326 2014-01-17  Simon Marchi  <simon.marchi@ericsson.com>
 327
 328         * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
 329         comments.
 330         * gdbarch.h: Regenerate.
 331
 332 2014-01-16  Tom Tromey  <tromey@redhat.com>
 333
 334         * value.c (struct value) <regnum>: Move earlier.
 335
 336 2014-01-16  Tom Tromey  <tromey@redhat.com>
 337
 338         * remote.c (extended_remote_create_inferior): Rename from
 339         extended_remote_create_inferior_1.  Add "ops" argument.  Remove
 340         old implementation.
 341
 342 2014-01-16  Pedro Alves  <palves@redhat.com>
 343
 344         * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
 345         NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
 346         the backchain.
 347
 348 2014-01-16  Doug Evans  <dje@google.com>
 349
 350         * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
 351
 352 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 353
 354         * btrace.h (btrace_thread_flag): New.
 355         (struct btrace_thread_info) <flags>: New.
 356         * record-btrace.c (record_btrace_resume_thread)
 357         (record_btrace_find_thread_to_move, btrace_step_no_history)
 358         (btrace_step_stopped, record_btrace_start_replaying)
 359         (record_btrace_step_thread, record_btrace_decr_pc_after_break)
 360         (record_btrace_find_resume_thread): New.
 361         (record_btrace_resume, record_btrace_wait): Extend.
 362         (record_btrace_can_execute_reverse): New.
 363         (record_btrace_open): Fail in non-stop mode.
 364         (record_btrace_set_replay): Split into this, ...
 365         (record_btrace_stop_replaying): ... this, ...
 366         (record_btrace_clear_histories): ... and this.
 367         (init_record_btrace_ops): Init to_can_execute_reverse.
 368         * NEWS: Announce it.
 369
 370 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 371
 372         * target.h (struct target_ops) <to_decr_pc_after_break>: New.
 373         (forward_target_decr_pc_after_break)
 374         (target_decr_pc_after_break): New.
 375         * target.c (forward_target_decr_pc_after_break)
 376         (target_decr_pc_after_break): New.
 377         * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
 378         instead of gdbarch_decr_pc_after_break.
 379         * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
 380         instead of gdbarch_decr_pc_after_break.
 381         * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
 382         instead of gdbarch_decr_pc_after_break.
 383         * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
 384         instead of gdbarch_decr_pc_after_break.
 385         * linux-thread-db.c (check_event): Call target_decr_pc_after_break
 386         instead of gdbarch_decr_pc_after_break.
 387         * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
 388         instead of gdbarch_decr_pc_after_break.
 389
 390 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 391
 392         * btrace.c: Include regcache.h.
 393         (btrace_add_pc): New.
 394         (btrace_enable): Call btrace_add_pc.
 395         (btrace_is_empty): New.
 396         * btrace.h (btrace_is_empty): New.
 397         * record-btrace.c (require_btrace, record_btrace_info): Call
 398         btrace_is_empty.
 399
 400 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 401
 402         * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
 403         Support delta reads.
 404         (linux_disable_btrace): Change return type.
 405         * common/linux-btrace.h (linux_read_btrace): Change parameters
 406         and return type to allow error reporting.  Update users.
 407         (linux_disable_btrace): Change return type.  Update users.
 408         * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
 409         New.
 410         (btrace_error): New.
 411         (btrace_block) <begin>: Comment on BEGIN == 0.
 412         * btrace.c (btrace_compute_ftrace): Start from the end of
 413         the current trace.
 414         (btrace_stitch_trace, btrace_clear_history): New.
 415         (btrace_fetch): Read delta trace, return if replaying.
 416         (btrace_clear): Move clear history code to btrace_clear_history.
 417         (parse_xml_btrace): Throw an error if parsing failed.
 418         * target.h (struct target_ops) <to_read_btrace>: Change parameters
 419         and return type to allow error reporting.
 420         (target_read_btrace): Change parameters and return type to allow
 421         error reporting.
 422         * target.c (target_read_btrace): Update.
 423         * remote.c (remote_read_btrace): Support delta reads.  Pass
 424         errors on.
 425         * NEWS: Announce it.
 426
 427 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 428
 429         * record.h (record_btrace_frame_unwind)
 430         (record_btrace_tailcall_frame_unwind): New declarations.
 431         * dwarf2-frame: Include record.h
 432         (dwarf2_frame_cfa): Throw an error for btrace frames.
 433         * record-btrace.c: Include hashtab.h.
 434         (btrace_get_bfun_name): New.
 435         (btrace_call_history): Call btrace_get_bfun_name.
 436         (struct btrace_frame_cache): New.
 437         (bfcache): New.
 438         (bfcache_hash, bfcache_eq, bfcache_new): New.
 439         (btrace_get_frame_function): New.
 440         (record_btrace_frame_unwind_stop_reason): Allow unwinding.
 441         (record_btrace_frame_this_id): Compute own id.
 442         (record_btrace_frame_prev_register): Provide PC, throw_error
 443         for all other registers.
 444         (record_btrace_frame_sniffer): Detect btrace frames.
 445         (record_btrace_tailcall_frame_sniffer): New.
 446         (record_btrace_frame_dealloc_cache): New.
 447         (record_btrace_frame_unwind): Add new functions.
 448         (record_btrace_tailcall_frame_unwind): New.
 449         (_initialize_record_btrace): Allocate cache.
 450         * btrace.c (btrace_clear): Call reinit_frame_cache.
 451         * NEWS: Announce it.
 452
 453 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 454
 455         * record-btrace.c (record_btrace_set_replay)
 456         (record_btrace_goto_begin, record_btrace_goto_end)
 457         (record_btrace_goto): New.
 458         (init_record_btrace_ops): Initialize them.
 459         * NEWS: Announce it.
 460
 461 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 462
 463         * record-btrace.c (record_btrace_find_new_threads)
 464         (record_btrace_thread_alive): New.
 465         (init_record_btrace_ops): Initialize to_find_new_threads and
 466         to_thread_alive.
 467
 468 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 469
 470         * record-btrace.c (record_btrace_resume): New.
 471         (record_btrace_wait): New.
 472         (init_record_btrace_ops): Initialize to_wait and to_resume.
 473
 474 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 475
 476         * record-btrace.c (record_btrace_xfer_partial)
 477         (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
 478         (record_btrace_allow_memory_access): New.
 479         (init_record_btrace_ops): Initialize new methods.
 480         * target.c (raw_memory_xfer_partial): Bail out if target reports
 481         that this memory is not available.
 482
 483 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 484
 485         * target.h (target_ops) <to_insert_breakpoint>
 486         <to_remove_breakpoint>: Add target_ops parameter.
 487         (forward_target_insert_breakpoint): New.
 488         (forward_target_remove_breakpoint): New.
 489         (memory_remove_breakpoint, memory_insert_breakpoint):
 490         Add target_ops parameter.
 491         * target.c (target_insert_breakpoint): Split into this and ...
 492         (forward_target_insert_breakpoint): ... this.
 493         (target_remove_breakpoint): Split into this and ...
 494         (forward_target_remove_breakpoint): ... this.
 495         (debug_to_insert_breakpoint): Add target_ops parameter.
 496         Call forward_target_insert_breakpoint.
 497         (debug_to_remove_breakpoint): Add target_ops parameter.
 498         Call forward_target_remove_breakpoint.
 499         (update_current_target): Do not inherit or default to_insert_breakpoint
 500         and to_remove_breakpoint.
 501         * corelow.c (ignore): Add target_ops parameter.
 502         * exec.c (ignore): Add target_ops parameter.
 503         * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
 504         Add target_ops parameter.
 505         * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
 506         Add target_ops parameter.
 507         * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
 508         Add target_ops parameter.
 509         * record-full.c (record_full_beneath_to_insert_breakpoint)
 510         (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
 511         (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
 512         (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
 513         (record_full_core_remove_breakpoint): Add target_ops parameter.
 514         Update users.
 515         (record_full_beneath_to_insert_breakpoint_ops)
 516         (record_full_beneath_to_remove_breakpoint_ops)
 517         (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
 518         (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
 519         tmp_to_remove_breakpoint_ops,
 520         record_full_beneath_to_insert_breakpoint_ops, and
 521         record_full_beneath_to_remove_breakpoint_ops.
 522         * remote-m32r-sdi.c (m32r_insert_breakpoint)
 523         (m32r_remove_breakpoint): Add target_ops parameter.
 524         * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
 525         Add target_ops parameter.
 526         * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
 527         Add target_ops parameter.
 528
 529 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 530             Markus Metzger  <markus.t.metzger@intel.com>
 531
 532         * record-btrace.c: Include frame-unwind.h.
 533         (record_btrace_frame_unwind_stop_reason)
 534         (record_btrace_frame_this_id, record_btrace_frame_prev_register)
 535         (record_btrace_frame_sniffer, record_btrace_frame_unwind):
 536         New.
 537         (init_record_btrace_ops): Install it.
 538
 539 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 540
 541         * frame.c (get_frame_unwind_stop_reason): Unconditionally call
 542         get_prev_frame_1.
 543
 544 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 545
 546         * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
 547         earlier.
 548
 549 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 550
 551         * frame-unwind.c: Include target.h.
 552         (frame_unwind_try_unwinder): New function with code from ...
 553         (frame_unwind_find_by_frame): ... here.  New variable
 554         unwinder_from_target, call also target_get_unwinder)
 555         (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
 556         * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
 557         * target.h (struct target_ops): New fields to_get_unwinder and
 558         to_get_tailcall_unwinder.
 559         (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
 560
 561 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 562
 563         * record-btrace.c (record_btrace_fetch_registers)
 564         (record_btrace_store_registers)
 565         (record_btrace_to_prepare_to_store): New.
 566         (init_record_btrace_ops): Add the above.
 567
 568 2014-01-16  Tom Tromey  <tromey@redhat.com>
 569
 570         * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
 571         * target.h (struct target_ops) <to_prepare_to_store>: Add
 572         argument.
 573         (target_prepare_to_store): Add argument.
 574         * target.c (debug_to_prepare_to_store): Add argument.
 575         (update_current_target): Update.
 576         * remote.c (remote_prepare_to_store): Add 'self' argument.
 577         * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
 578         * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
 579         * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
 580         * record-full.c (record_full_core_prepare_to_store): Add 'self'
 581         argument.
 582         * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
 583         * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
 584         * monitor.c (monitor_prepare_to_store): Add 'self' argument.
 585         * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
 586         * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
 587
 588 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 589
 590         * btrace.h (replay) <replay>: New.
 591         (btrace_is_replaying): New.
 592         * btrace.c (btrace_clear): Free replay iterator.
 593         (btrace_is_replaying): New.
 594         * record-btrace.c (record_btrace_is_replaying): New.
 595         (record_btrace_info): Print insn number if replaying.
 596         (record_btrace_insn_history): Start at replay position.
 597         (record_btrace_call_history): Start at replay position.
 598         (init_record_btrace_ops): Init to_record_is_replaying.
 599
 600 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 601
 602         * record-btrace.c (record_btrace_insn_history_range): Include
 603         end.
 604         (record_btrace_insn_history_from): Adjust range.
 605         (record_btrace_call_history_range): Include
 606         end.
 607         (record_btrace_call_history_from): Adjust range.
 608         * NEWS: Announce changes.
 609
 610 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 611
 612         * record.h (enum record_print_flag)
 613         <record_print_indent_calls>: New.
 614         * record.c (get_call_history_modifiers): Recognize /c modifier.
 615         (_initialize_record): Document /c modifier.
 616         * record-btrace.c (btrace_call_history): Add btinfo parameter.
 617         Reorder fields.  Optionally indent the function name.  Update
 618         all users.
 619         * NEWS: Announce changes.
 620
 621 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 622
 623         * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
 624
 625 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 626
 627         * btrace.c (ftrace_new_function): Start counting at one.
 628         * record-btrace.c (record_btrace_info): Adjust number of calls
 629         and insns.
 630         * NEWS: Announce it.
 631
 632 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 633
 634         * record-btrace.c (btrace_call_history_insn_range): Print
 635         insn range as [begin, end].
 636
 637 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 638
 639         * btrace.h (struct btrace_func_link): New.
 640         (enum btrace_function_flag): New.
 641         (struct btrace_inst): Rename to ...
 642         (struct btrace_insn): ...this. Update all users.
 643         (struct btrace_func) <ibegin, iend>: Remove.
 644         (struct btrace_func_link): New.
 645         (struct btrace_func): Rename to ...
 646         (struct btrace_function): ...this. Update all users.
 647         (struct btrace_function) <segment, flow, up, insn, insn_offset)
 648         (number, level, flags>: New.
 649         (struct btrace_insn_iterator): Rename to ...
 650         (struct btrace_insn_history): ...this.
 651         Update all users.
 652         (struct btrace_insn_iterator, btrace_call_iterator): New.
 653         (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
 654         (struct btrace_target_info) <begin, end, level>
 655         <insn_history, call_history>: New.
 656         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
 657         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
 658         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
 659         (btrace_call_number, btrace_call_begin, btrace_call_end)
 660         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
 661         (btrace_find_function_by_number, btrace_set_insn_history)
 662         (btrace_set_call_history): New.
 663         * btrace.c (btrace_init_insn_iterator)
 664         (btrace_init_func_iterator, compute_itrace): Remove.
 665         (ftrace_print_function_name, ftrace_print_filename)
 666         (ftrace_skip_file): Change
 667         parameter to const.
 668         (ftrace_init_func): Remove.
 669         (ftrace_debug): Use new btrace_function fields.
 670         (ftrace_function_switched): Also consider gaining and
 671         losing symbol information).
 672         (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
 673         (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
 674         (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
 675         New.
 676         (ftrace_new_function): Move. Remove debug print.
 677         (ftrace_update_lines, ftrace_update_insns): New.
 678         (ftrace_update_function): Check for call, ret, and jump.
 679         (compute_ftrace): Renamed to ...
 680         (btrace_compute_ftrace): ...this. Rewritten to compute call
 681         stack.
 682         (btrace_fetch, btrace_clear): Updated.
 683         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
 684         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
 685         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
 686         (btrace_call_number, btrace_call_begin, btrace_call_end)
 687         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
 688         (btrace_find_function_by_number, btrace_set_insn_history)
 689         (btrace_set_call_history): New.
 690         * record-btrace.c (require_btrace): Use new btrace thread
 691         info fields.
 692         (record_btrace_info, btrace_insn_history)
 693         (record_btrace_insn_history, record_btrace_insn_history_range):
 694         Use new btrace thread info fields and new iterator.
 695         (btrace_func_history_src_line): Rename to ...
 696         (btrace_call_history_src_line): ...this. Use new btrace
 697         thread info fields.
 698         (btrace_func_history): Rename to ...
 699         (btrace_call_history): ...this. Use new btrace thread info
 700         fields and new iterator.
 701         (record_btrace_call_history, record_btrace_call_history_range):
 702         Use new btrace thread info fields and new iterator.
 703
 704 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 705
 706         * frame.h (frame_id_build_unavailable_stack_special): New.
 707         * frame.c (frame_id_build_unavailable_stack_special): New.
 708
 709 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 710
 711         * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
 712         (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
 713         (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
 714         to gdbarch.
 715         * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
 716         (i386_insn_is_jump, i386_jmp_p): New.
 717         (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
 718         insn_is_jump to gdbarch.
 719         * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
 720         * gdbarch.h: Regenerated.
 721         * gdbarch.c: Regenerated.
 722         * arch-utils.h (default_insn_is_call, default_insn_is_ret)
 723         (default_insn_is_jump): New.
 724         * arch-utils.c (default_insn_is_call, default_insn_is_ret)
 725         (default_insn_is_jump): New.
 726
 727 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 728
 729         * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
 730         Change to ...
 731         (btrace_read_type) <BTRACE_READ_ALL>: ... this.  Update users.
 732         (btrace_read_type) <btrace_read_new>: Change to ...
 733         (btrace_read_type) <BTRACE_READ_NEW>: ... this.  Update users.
 734
 735 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 736
 737         * common/linux-btrace.c (linux_read_btrace): Free trace from
 738         previous iteration.
 739
 740 2014-01-15  Doug Evans  <dje@google.com>
 741
 742         * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
 743         uint32_t.
 744
 745 2014-01-15  Tom Tromey  <tromey@redhat.com>
 746
 747         * dbxread.c (process_one_symbol): Use set_objfile_main_name.
 748         * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
 749         * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
 750         (set_objfile_main_name): New function.
 751         * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
 752         language_of_main>: New fields.
 753         (set_objfile_main_name): Declare.
 754         * symtab.c (find_main_name): Loop over objfiles to find the main
 755         name and language.
 756         (set_main_name): Now static.
 757         (get_main_info): Add comment.
 758         * symtab.h (set_main_name): Don't declare.
 759
 760 2014-01-15  Tom Tromey  <tromey@redhat.com>
 761
 762         * symtab.c (main_progspace_key): New global.
 763         (struct main_info): New.
 764         (name_of_main, language_of_main): Remove.
 765         (get_main_info, main_info_cleanup): New function.
 766         (set_main_name, main_name, main_language): Use get_main_info.
 767         (_initialize_symtab): Initialize main_progspace_key.
 768
 769 2014-01-15  Tom Tromey  <tromey@redhat.com>
 770
 771         * dbxread.c (process_one_symbol): Update.
 772         * dwarf2read.c (read_partial_die): Update.
 773         * symfile.c (set_initial_language): Call main_language.
 774         * symtab.c (language_of_main): Now static.
 775         (set_main_name): Add 'lang' parameter.
 776         (find_main_name): Update.
 777         (main_language): New function.
 778         (symtab_observer_executable_changed): Update.
 779         * symtab.h (set_main_name): Update.
 780         (language_of_main): Remove.
 781         (main_language): Declare.
 782
 783 2014-01-15  Tom Tromey  <tromey@redhat.com>
 784
 785         * symfile.c (init_entry_point_info): Use new "initialized" field.
 786         Update.
 787         * objfiles.h (struct entry_point) <initialized>: New field.
 788         (struct objfile_per_bfd_storage) <ei>: New field, moved from...
 789         (struct objfile) <ei>: ...here.  Remove.
 790         * objfiles.c (entry_point_address_query): Update.
 791
 792 2014-01-15  Tom Tromey  <tromey@redhat.com>
 793
 794         * objfiles.c (entry_point_address_query): Relocate entry point
 795         address.
 796         (objfile_relocate1): Do not relocate entry point address.
 797         * objfiles.h (struct entry_info) <entry_point>: Update comment.
 798         <the_bfd_section_index>: New field.
 799         * symfile.c (init_entry_point_info): Find the entry point's
 800         section.
 801
 802 2014-01-15  Tom Tromey  <tromey@redhat.com>
 803
 804         * solib-frv.c (enable_break): Use entry_point_address_query.
 805
 806 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 807
 808         * NEWS: Add note on improved process record-replay on
 809         arm*-linux* targets.
 810
 811 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 812
 813         * arm-tdep.c (enum arm_record_result): New enum.
 814         (arm_record_unsupported_insn): New function.
 815         (arm_record_coproc_data_proc): Removed.
 816         (thumb2_record_ld_st_multiple): New function.
 817         (thumb2_record_ld_st_dual_ex_tbb): New function.
 818         (thumb2_record_data_proc_sreg_mimm): New function.
 819         (thumb2_record_ps_dest_generic): New function.
 820         (thumb2_record_branch_misc_cntrl): New function.
 821         (thumb2_record_str_single_data): New function.
 822         (thumb2_record_ld_mem_hints): New function.
 823         (thumb2_record_ld_word): New function.
 824         (thumb2_record_lmul_lmla_div): New function.
 825         (thumb2_record_decode_insn_handler): New function.
 826         (decode_insn): Add thumb32 instruction handlers.
 827
 828 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 829
 830         * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
 831         (struct arm_linux_record_tdep): Declare.
 832         (arm_canonicalize_syscall): New function.
 833         (arm_all_but_pc_registers_record): New function.
 834         (arm_linux_syscall_record): New function.
 835         (arm_linux_init_abi): Add syscall recording constructs.
 836         * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
 837         decoding.  (arm_record_coproc_data_proc): Update arm syscall
 838         decoding.
 839         * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
 840         <arm_syscall_record>: New field.
 841         * configure.tgt (arm*-*-linux*): Add linux-record.o to
 842         gdb_target_obs.
 843
 844 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 845
 846         * arm-tdep.c (thumb_record_misc): Update to use sp as base
 847         register for push instruction recording.
 848
 849 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 850
 851         * arm-tdep.c (thumb_record_misc): Update to correct logical
 852         error while recording ldm, ldmia and pop instructions.
 853
 854 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 855
 856         * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
 857
 858 2014-01-15  Pedro Alves  <palves@redhat.com>
 859
 860         * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
 861         (go32_resume, go32_fetch_registers, store_register)
 862         (go32_store_registers, go32_prepare_to_store)
 863         (go32_xfer_memory, go32_files_info, go32_kill_inferior)
 864         (go32_create_inferior, go32_can_run, go32_terminal_init)
 865         (go32_terminal_inferior, go32_terminal_ours): Delete forward
 866         declarations.
 867
 868 2014-01-15  Tom Tromey  <tromey@redhat.com>
 869
 870         * target.h (async_callback_ftype): New typedef.
 871         (struct target_ops) <to_async>: Use it.
 872
 873 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
 874
 875         * python/py-value.c (get_field_type): Remove unnecessary curly
 876         braces for single-statement if block.
 877
 878 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
 879
 880         * python/py-type.c (convert_field): Add missing empty line
 881         after declarations.
 882
 883 2014-01-14  Doug Evans  <dje@google.com>
 884
 885         * symfile.h (expand_symtabs_matching): Renamed from
 886         expand_partial_symbol_names.  Update prototype.
 887         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
 888         * symfile.c (expand_symtabs_matching): Renamed from
 889         expand_partial_symbol_names.  New args file_matcher, kind.
 890         Rename arg fun to symbol_matcher.
 891         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
 892         * ada-lang.c (ada_complete_symbol_matcher): Renamed from
 893         ada_expand_partial_symbol_name.
 894         (ada_make_symbol_completion_list): Update to call
 895         expand_symtabs_matching.
 896         (ada_add_global_exceptions): Call expand_symtabs_matching.
 897         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
 898         call map_symbol_filenames.
 899         * symtab.c (sources_info): Update to call map_symbol_filenames.
 900         (search_symbols): Call expand_symtabs_matching.
 901         (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
 902         (default_make_symbol_completion_list_break_on): Update to call
 903         expand_symtabs_matching.
 904         (make_source_files_completion_list): Update to call
 905         map_symbol_filenames.
 906
 907 2014-01-14  Doug Evans  <dje@google.com>
 908
 909         * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
 910         (expand_symtabs_symbol_matcher_ftype): New typedef.
 911         (quick_symbol_functions.expand_symtabs_matching): Update to use.
 912         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 913         * symfile.c (expand_partial_symbol_names): Update to use
 914         expand_symtabs_symbol_matcher_ftype.
 915         * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
 916         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 917         Arg name_matcher renamed to symbol_matcher.
 918         * psymtab.c (recursively_search_psymtabs): Update to use
 919         expand_symtabs_symbol_matcher_ftype.  Arg name_matcher renamed to
 920         sym_matcher.
 921         (expand_symtabs_matching_via_partial): Update to use
 922         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 923         Arg name_matcher renamed to symbol_matcher.
 924
 925 2014-01-14  Doug Evans  <dje@google.com>
 926
 927         * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
 928         (map_partial_symbol_filenames): Ditto.
 929         * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
 930         (map_partial_symbol_filenames): Ditto.
 931         * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
 932         (map_partial_symbol_filenames): Ditto.
 933         * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
 934         (map_partial_symbol_filenames): Ditto.
 935         * symtab.c: Delete #include "psymtab.h".
 936
 937 2014-01-14  Pedro Alves  <palves@redhat.com>
 938             Tom Tromey  <tromey@redhat.com>
 939
 940         * infrun.c (use_displaced_stepping): Use find_record_target
 941         instead of RECORD_IS_USED.
 942         (adjust_pc_after_break): Use record_full_is_used instead of
 943         RECORD_IS_USED.
 944         * record-btrace.c (record_btrace_open): Call record_preopen
 945         instead of checking RECORD_IS_USED.
 946         * record-full.c (record_full_shortname)
 947         (record_full_core_shortname): New globals.
 948         (record_full_is_used): New function.
 949         (find_full_open): Call record_preopen instead of checking
 950         RECORD_IS_USED.
 951         (init_record_full_ops): Set the target's shortname to
 952         record_full_shortname.
 953         (init_record_full_core_ops): Set the target's shortname to
 954         record_full_core_shortname.
 955         * record-full.h (record_full_is_used): Declare.
 956         * record.c (find_record_target): Make extern.
 957         (record_preopen): New function.
 958         * record.h (RECORD_IS_USED): Delete macro.
 959         (find_record_target, record_preopen): Declare functions.
 960
 961 2014-01-14  Yao Qi  <yao@codesourcery.com>
 962
 963         * gdbarch.sh (core_xfer_shared_libraries): Change its argument
 964         'len''s type to ULONGEST.
 965         (core_xfer_shared_libraries_aix): Likewise.
 966         * gdbarch.c, gdbarch.h: Regenerated.
 967         * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
 968         Change type of 'len' to ULONGEST.
 969         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
 970         (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
 971
 972 2014-01-14  Yao Qi  <yao@codesourcery.com>
 973
 974         * common/linux-osdata.c (linux_xfer_osdata_processes): Change
 975         type of 'len' to ULONGEST.
 976         (linux_xfer_osdata_processgroups): Likewise.
 977         (linux_xfer_osdata_threads): Likewise.
 978         (linux_xfer_osdata_fds): Likewise.
 979         (linux_xfer_osdata_isockets): Likewise.
 980         (linux_xfer_osdata_shm): Likewise.
 981         (linux_xfer_osdata_sem): Likewise.
 982         (linux_xfer_osdata_msg): Likewise.
 983         (linux_common_xfer_osdata): Likewise.
 984         (struct osdata_type) <getter>: Likewise.
 985         * common/linux-osdata.h (linux_common_xfer_osdata): Update
 986         the declaration.
 987
 988 2014-01-14  Yao Qi  <yao@codesourcery.com>
 989
 990         * target.h (target_xfer_partial_ftype): Update.
 991         (struct target_ops) <to_xfer_partial>: Change 'len' type to
 992         ULONGEST.
 993         * aix-thread.c (aix_thread_xfer_partial): Change type of
 994         argument 'len' to ULONGEST.
 995         * auxv.c (procfs_xfer_auxv): Likewise.
 996         (ld_so_xfer_auxv): Likewise.
 997         (memory_xfer_auxv): Likewise.
 998         * bfd-target.c (target_bfd_xfer_partial): Likewise.
 999         * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1000         * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1001         * corelow.c (core_xfer_partial): Likewise.
1002         * ctf.c (ctf_xfer_partial): Likewise.
1003         * darwin-nat.c (darwin_read_write_inferior): Likewise.  Use
1004         '%u'.
1005         (darwin_read_dyld_info): Likewise.
1006         (darwin_xfer_partial): Likewise.
1007         * exec.c (section_table_xfer_memory_partial): Likewise.
1008         (exec_xfer_partial): Likewise.
1009         * exec.h (section_table_xfer_memory_partial): Update
1010         declaration.
1011         * gnu-nat.c (gnu_xfer_memory): Likewise.  Call pulongest
1012         instead of plongest.
1013         (gnu_xfer_partial): Likewise.
1014         * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1015         (ia64_hpux_xfer_solib_got): Likewise.
1016         (ia64_hpux_xfer_partial): Likewise.
1017         * ia64-linux-nat.c (ia64_linux_xfer_partial):
1018         * inf-ptrace.c (inf_ptrace_xfer_partial):
1019         * inf-ttrace.c (inf_ttrace_xfer_partial):
1020         * linux-nat.c (linux_xfer_siginfo): Likewise.
1021         (linux_nat_xfer_partial): Likewise.
1022         (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1023         (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1024         * monitor.c (monitor_xfer_memory): Likewise.
1025         (monitor_xfer_partial): Likewise.
1026         * procfs.c (procfs_xfer_partial): Likewise.
1027         * record-full.c (record_full_xfer_partial): Likewise.
1028         (record_full_core_xfer_partial): Likewise.
1029         * remote-sim.c (gdbsim_xfer_memory): Likewise.  Call pulongest
1030         instead of plongest.
1031         (gdbsim_xfer_partial): Likewise.
1032         * remote.c (remote_xfer_partial): Likewise.
1033         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1034         * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1035         declaration.
1036         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1037         (rs6000_xfer_shared_libraries): Likewise.
1038         * sol-thread.c (sol_thread_xfer_partial): Likewise.
1039         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1040         (sparc_xfer_partial): Likewise.
1041         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1042         (spu_xfer_partial): Likewise.
1043         * spu-multiarch.c (spu_xfer_partial): Likewise.
1044         * target.c (target_read_live_memory): Likewise.
1045         (memory_xfer_live_readonly_partial): Likewise.
1046         (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1047         (target_xfer_partial, default_xfer_partial): Likewise.
1048         (current_xfer_partial): Likewise.
1049         * tracepoint.c (tfile_xfer_partial): Likewise.
1050         * windows-nat.c (windows_xfer_memory): Likewise.  Call
1051         pulongest instead of plongest.
1052         (windows_xfer_partial): Likewise.
1053         (windows_xfer_shared_libraries): Likewise.
1054
1055 2014-01-14  Yao Qi  <yao@codesourcery.com>
1056
1057         * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1058         target_xfer_partial_ftype.
1059
1060 2014-01-13  Siva Chandra Reddy  <sivachandra@google.com>
1061
1062         PR python/15464
1063         PR python/16113
1064         * valops.c (value_struct_elt_bitpos): New function
1065         * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1066         object to 'None' if the field name is an empty string ("").
1067         * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1068         attribute to look for a field when 'name' is 'None'.
1069         (get_field_type): New function
1070
1071 2014-01-13  Doug Evans  <dje@google.com>
1072
1073         PR symtab/16426
1074         * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1075         (try_open_dwop_file): Ditto.
1076         * gdb_bfd.c: #include "vec.h".
1077         (bfdp): New typedef.
1078         (struct gdb_bfd_data): New member included_bfds.
1079         (gdb_bfd_unref): Unref all included bfds.
1080         (gdb_bfd_record_inclusion): New function.
1081         * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1082
1083 2014-01-13  Tom Tromey  <tromey@redhat.com>
1084
1085         * gdbcore.h (deprecated_core_resize_section_table): Remove.
1086
1087 2014-01-13  Tom Tromey  <tromey@redhat.com>
1088
1089         * defs.h (use_windows): Remove.
1090         * gdb.c (main): Update.
1091         * main.c (captured_main, gdb_main): Update.
1092         * main.h (struct captured_main_args) <use_windows>: Remove.
1093         * top.c (use_windows): Remove.
1094
1095 2014-01-13  Tom Tromey  <tromey@redhat.com>
1096
1097         * defs.h (deprecated_flush_hook): Remove.
1098
1099 2014-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1100
1101         PR threads/16216
1102         * linux-thread-db.c (try_thread_db_load): Add parameter
1103         check_auto_load_safe.  Move here the file_is_auto_load_safe call.
1104         (try_thread_db_load_from_pdir_1): Move it there from here.
1105         (try_thread_db_load_from_sdir): Update caller.
1106         (try_thread_db_load_from_dir): Move it there from here.
1107
1108 2014-01-13  Patrick Palka  <patrick@parcs.ath.cx>
1109
1110         * regformats/regdat.sh: Always rewrite the register file.
1111
1112 2014-01-13  Pedro Alves  <palves@redhat.com>
1113
1114         * Makefile.in (CHECK_HEADERS): New variable.
1115         (check-headers:): New rule.
1116
1117 2014-01-13  Tom Tromey  <tromey@redhat.com>
1118
1119         * cli/cli-setshow.c (do_set_command): Update.
1120         * defs.h (deprecated_set_hook): Remove.
1121         * top.c (deprecated_set_hook): Remove.
1122
1123 2014-01-13  Pedro Alves  <palves@redhat.com>
1124
1125         * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1126         the tracepoint if the PC is a pseudo-register.
1127
1128 2014-01-13  Tom Tromey  <tromey@redhat.com>
1129
1130         * defs.h (XCALLOC): Remove.
1131         * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1132         (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1133         * dwarf2loc.c (allocate_piece_closure): Likewise.
1134         * elfread.c (elf_symfile_segments): Likewise.
1135         (elf_symfile_segments): Likewise.
1136         * gdbtypes.c (copy_type_recursive): Likewise.
1137         * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1138         * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1139         * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1140         XCALLOC.
1141         * mt-tdep.c (mt_gdbarch_init): Likewise.
1142         * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1143         XCALLOC.
1144         * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1145         * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1146         * registry.c (registry_alloc_data): Likewise.
1147         * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1148         * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1149         * serial.c (serial_fdopen_ops): Likewise.
1150         * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1151         XCALLOC.
1152         * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1153         * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1154         not XCALLOC.
1155
1156 2014-01-13  Tom Tromey  <tromey@redhat.com>
1157
1158         * defs.h (XMALLOC): Remove.
1159         * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1160         * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1161         * cli-out.c (struct ui_out *): Likewise.
1162         * cli/cli-dump.c (add_dump_command): Likewise.
1163         (add_dump_command): Likewise.
1164         * complaints.c (get_complaints): Likewise.
1165         (find_complaint): Likewise.
1166         * dwarf2-frame.c (execute_cfa_program): Likewise.
1167         * dwarf2read.c (abbrev_table_read_table): Likewise.
1168         * gdbarch.sh: Likewise.
1169         * gdbarch.c: Rebuild.
1170         * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1171         * interps.c (interp_new): Likewise.
1172         * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1173         * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1174         * mi/mi-console.c (mi_console_file_new): Likewise.
1175         * mi/mi-interp.c (mi_interpreter_init): Likewise.
1176         * mi/mi-out.c (mi_out_new): Likewise.
1177         * mi/mi-parse.c (mi_parse): Likewise.
1178         * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1179         * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1180         * observer.c (xalloc_observer_list_node): Likewise.
1181         * regcache.c (regcache_xmalloc_1): Likewise.
1182         * reggroups.c (reggroup_new): Likewise.
1183         (_initialize_reggroup): Likewise.
1184         * registry.c (register_data_with_cleanup): Likewise.
1185         * remote.c (remote_notif_stop_alloc_reply): Likewise.
1186         * ser-base.c (serial_ttystate): Likewise.
1187         * ser-mingw.c (make_pipe_state): Likewise.
1188         * ser-pipe.c (pipe_open): Likewise.
1189         * serial.c (serial_open): Likewise.
1190         * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1191         * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1192         (tui_alloc_win_info): Likewise.
1193         (tui_add_content_elements): Likewise.
1194         * tui/tui-file.c (tui_file_new): Likewise.
1195         * tui/tui-out.c (tui_out_new): Likewise.
1196         * ui-file.c (mem_file_new): Likewise.
1197         * ui-out.c (push_level): Likewise.
1198         (make_cleanup_ui_out_end): Likewise.
1199         (append_header_to_list): Likewise.
1200         (ui_out_new): Likewise.
1201         * user-regs.c (user_reg_add_builtin): Likewise.
1202
1203 2014-01-13  Tom Tromey  <tromey@redhat.com>
1204
1205         * defs.h (XZALLOC): Remove.
1206         * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1207         * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1208         (get_ada_tasks_inferior_data): Likewise.
1209         * auto-load.c (get_auto_load_pspace_data): Likewise.
1210         * auxv.c (get_auxv_inferior_data): Likewise.
1211         * bfd-target.c (target_bfd_reopen): Likewise.
1212         * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1213         (deprecated_insert_raw_breakpoint): Likewise.
1214         * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1215         * corelow.c (core_open): Likewise.
1216         * darwin-nat.c (darwin_check_new_threads): Likewise.
1217         (darwin_attach_pid): Likewise.
1218         * dummy-frame.c (dummy_frame_push): Likewise.
1219         * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1220         * dwarf2loc.c (allocate_piece_closure): Likewise.
1221         * elfread.c (elf_symfile_segments): Likewise.
1222         * eval.c (ptrmath_type_p): Likewise.
1223         * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1224         * gdbtypes.c (alloc_type_arch): Likewise.
1225         (alloc_type_instance): Likewise.
1226         * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1227         * inf-child.c (inf_child_can_use_agent): Likewise.
1228         * inflow.c (get_inflow_inferior_data): Likewise.
1229         * infrun.c (save_infcall_suspend_state): Likewise.
1230         * jit.c (jit_reader_load): Likewise.
1231         (get_jit_objfile_data): Likewise.
1232         (get_jit_program_space_data): Likewise.
1233         (jit_object_open_impl): Likewise.
1234         (jit_symtab_open_impl): Likewise.
1235         (jit_block_open_impl): Likewise.
1236         (jit_frame_sniffer): Likewise.
1237         * linux-fork.c (add_fork): Likewise.
1238         * maint.c (make_command_stats_cleanup): Likewise.
1239         * objfiles.c (get_objfile_pspace_data): Likewise.
1240         * opencl-lang.c (struct lval_closure): Likewise.
1241         * osdata.c (osdata_start_osdata): Likewise.
1242         * progspace.c (new_address_space): Likewise.
1243         (add_program_space): Likewise.
1244         * remote-sim.c (get_sim_inferior_data): Likewise.
1245         * sh-tdep.c (sh_gdbarch_init): Likewise.
1246         * skip.c (Ignore): Likewise.
1247         (skip_delete_command): Likewise.
1248         * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1249         (library_list_start_library): Likewise.
1250         (solib_aix_current_sos): Likewise.
1251         * solib-darwin.c (get_darwin_info): Likewise.
1252         (darwin_current_sos): Likewise.
1253         * solib-dsbt.c (get_dsbt_info): Likewise.
1254         * solib-ia64-hpux.c (new_so_list): Likewise.
1255         (ia64_hpux_get_solib_linkage_addr): Likewise.
1256         * solib-spu.c (append_ocl_sos): Likewise.
1257         (spu_current_sos): Likewise.
1258         * solib-svr4.c (get_svr4_info): Likewise.
1259         (svr4_keep_data_in_core): Likewise.
1260         (library_list_start_library): Likewise.
1261         (svr4_default_sos): Likewise.
1262         (svr4_read_so_list): Likewise.
1263         * solib-target.c (library_list_start_library): Likewise.
1264         (solib_target_current_sos): Likewise.
1265         * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1266         * symfile-debug.c (install_symfile_debug_logging): Likewise.
1267         * symfile.c (default_symfile_segments): Likewise.
1268         * target-descriptions.c (tdesc_data_init): Likewise.
1269         (tdesc_create_reg): Likewise.
1270         (struct tdesc_type *): Likewise.
1271         (tdesc_create_vector): Likewise.
1272         (tdesc_set_struct_size): Likewise.
1273         (struct tdesc_type *): Likewise.
1274         (tdesc_free_feature): Likewise.
1275         (tdesc_create_feature): Likewise.
1276         * windows-nat.c (windows_add_thread): Likewise.
1277         (windows_make_so): Likewise.
1278         * xml-support.c (gdb_xml_body_text): Likewise.
1279         (gdb_xml_create_parser_and_cleanup): Likewise.
1280         (xml_process_xincludes): Likewise.
1281         * xml-syscall.c (allocate_syscalls_info): Likewise.
1282         (syscall_create_syscall_desc): Likewise.
1283
1284 2014-01-12  Sergio Durigan Junior  <sergiodj@redhat.com>
1285
1286         * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1287         function, with code from i386_stap_parse_special_token.
1288         (i386_stap_parse_special_token_three_arg_disp): Likewise.
1289         (i386_stap_parse_special_token): Move code to the two functions
1290         above; simplify it.
1291
1292 2014-01-09  Pedro Alves  <palves@redhat.com>
1293             Hui Zhu  <hui@codesourcery.com>
1294
1295         PR gdb/16101
1296         * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1297         bp_err_string.  Don't mark the location shlib_disabled if the
1298         error thrown wasn't a generic or memory error.  Catch errors
1299         thrown while inserting breakpoints in overlayed code.  Output
1300         error message of software breakpoints.
1301         * remote.c (remote_insert_breakpoint): If this breakpoint has
1302         target-side commands but this stub doesn't support Z0 packets,
1303         throw NOT_SUPPORTED_ERROR error.
1304         * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1305         * target.h (target_insert_breakpoint): Extend comment.
1306         (target_insert_hw_breakpoint): Add comment.
1307
1308 2014-01-08  Pedro Alves  <palves@redhat.com>
1309
1310         * remote.c (remote_add_thread): Add threads silently if starting
1311         up.
1312         (remote_notice_new_inferior): If in all-stop, and starting up,
1313         don't call notice_new_inferior.
1314         (get_current_thread): New function, factored out from ...
1315         (add_current_inferior_and_thread): ... this.  Adjust.
1316         (remote_start_remote) <all-stop>: Fetch the thread list.  If we
1317         found any thread, then select the remote's current thread as GDB's
1318         current thread too.
1319
1320 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
1321
1322         * NEWS: Create a new section for the next release branch.
1323         Rename the section of the current branch, now that it has
1324         been cut.
1325
1326 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
1327
1328         GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1329         * version.in: Bump version to 7.7.50.DATE-cvs.
1330
1331 2014-01-08  Yao Qi  <yao@codesourcery.com>
1332
1333         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1334         type of 'id' to gdb_byte.  Cast 'id' to 'const char *'.
1335         (spu_xfer_partial): Cast 'buf' to 'const char *'.
1336
1337 2014-01-08  Yao Qi  <yao@codesourcery.com>
1338
1339         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1340         return value of bfd_get_filename to symbol_file_add_from_bfd.
1341
1342 2014-01-08  Pierre Muller  <muller@sourceware.org>
1343
1344         Fix PR16201.
1345         * coff-pe-read.c (struct read_pe_section_data): Add index field.
1346         (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1347         to prim_record_mininal_symbol_and_info.
1348         (add_pe_forwarded_sym): Use known section number of forwarded symbol
1349         in call to prim_record_minimal_symbol_and_info.
1350         (read_pe_exported_syms): Set index field of section_data.
1351
1352 2014-01-07  Andrew Pinski  <apinski@cavium.com>
1353
1354         * features/aarch64-core.xml (cpsr): Change to be 64bit.
1355         * features/aarch64.c: Regenerate.
1356
1357 2014-01-07  Andreas Schwab  <schwab@linux-m68k.org>
1358
1359         * target.c (return_null): Define.
1360         (update_current_target): Use it instead of return_zero for
1361         functions that return a pointer.
1362
1363 2014-01-07  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
1364
1365         * source.c (add_path): Fix check for duplicated paths in the previously
1366         included paths.
1367
1368 2014-01-07  Honggyu Kim  <hong.gyu.kim@lge.com>
1369
1370         * ada-lang.c: Remove duplicated include statements.
1371         * alphabsd-nat.c: Ditto.
1372         * amd64-darwin-tdep.c: Ditto.
1373         * amd64fbsd-nat.c: Ditto.
1374         * auto-load.c: Ditto.
1375         * ax-gdb.c: Ditto.
1376         * breakpoint.c: Ditto.
1377         * dbxread.c: Ditto.
1378         * fork-child.c: Ditto.
1379         * gdb_usleep.c: Ditto.
1380         * i386-darwin-tdep.c: Ditto.
1381         * i386fbsd-nat.c: Ditto.
1382         * infcmd.c: Ditto.
1383         * inferior.c: Ditto.
1384         * jv-lang.c: Ditto.
1385         * linux-nat.c: Ditto.
1386         * linux-tdep.c: Ditto.
1387         * m68kbsd-nat.c: Ditto.
1388         * m68klinux-nat.c: Ditto.
1389         * microblaze-tdep.c: Ditto.
1390         * mips-linux-tdep.c: Ditto.
1391         * mn10300-tdep.c: Ditto.
1392         * nto-tdep.c: Ditto.
1393         * opencl-lang.c: Ditto.
1394         * osdata.c: Ditto.
1395         * printcmd.c: Ditto.
1396         * regcache.c: Ditto.
1397         * remote-m32r-sdi.c: Ditto.
1398         * remote.c: Ditto.
1399         * symfile.c: Ditto.
1400         * symtab.c: Ditto.
1401         * tilegx-linux-nat.c: Ditto.
1402         * tilegx-tdep.c: Ditto.
1403         * tracepoint.c: Ditto.
1404         * valops.c: Ditto.
1405         * vaxbsd-nat.c: Ditto.
1406         * windows-nat.c: Ditto.
1407         * xtensa-tdep.c: Ditto.
1408
1409 2014-01-07  Yao Qi  <yao@codesourcery.com>
1410
1411         * spu-linux-nat.c (_initialize_spu_nat): Declare.
1412
1413 2014-01-07  Yao Qi  <yao@codesourcery.com>
1414             Joel Brobecker  <brobecker@adacore.com>
1415
1416         * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1417         (pdc_write_regs): Likewise.
1418         (fetch_regs_kernel_thread): Likewise.
1419         (store_regs_kernel_thread): Likewise.
1420
1421 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1422
1423         * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1424         tagged type objects to their actual type.
1425
1426 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1427
1428         * ada-valprint.c (print_field_values): Add "language" parameter.
1429         Update calls to print_field_values and print_variant_part.
1430         Pass new parameter "language" in call to val_print instead
1431         of "current_language".  Replace call to ada_val_print by call
1432         to val_print.
1433         (print_variant_part): Add "language" parameter.
1434         (ada_val_print_struct_union): Update call to print_field_values.
1435
1436 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1437
1438         * ada-valprint.c (ui_memcpy): Delete.
1439         (ada_print_floating): Update documentation.  Add empty line
1440         between between function documentation and implementation.
1441         Delete variable "buffer".  Use ui_file_xstrdup in place of
1442         ui_file_put.  Minor adjustments following this change.
1443
1444 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1445
1446         * ada-valprint.c (ada_val_print_string): New function,
1447         extracted from ada_val_print_array.
1448         (ada_val_print_array): Replace extracted code by call
1449         to ada_val_print_string followed by a return.  Move
1450         "else" branch to the function's top block.
1451
1452 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1453
1454         * ada-valprint.c (ada_val_print_array): Move implementation
1455         down.  Rename parameter "offset" and "val" into "offset_aligned"
1456         and "original_value" respectively.  Add parameter "offset".
1457
1458 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1459
1460         * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1461         re-organizing the code. Change the "???" message printed
1462         when target type is a TYPE_CODE_UNDEF into
1463         "<ref to undefined type>".
1464
1465 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1466
1467         * ada-valprint.c (print_record): Delete, implementation inlined...
1468         (ada_val_print_struct_union): ... here.  Remove call to
1469         ada_check_typedef in inlined implementation.
1470
1471 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1472
1473         * ada-valprint.c (ada_val_print_gnat_array): New function,
1474         extracted from ada_val_print_1;
1475         (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1476         (ada_val_print_flt, ada_val_print_struct_union)
1477         (ada_val_print_ref): Likewise.
1478         (ada_val_print_1): Delete variables i and elttype.
1479         Replace extracted-out code by call to corresponding
1480         new functions.
1481
1482 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1483
1484         * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1485
1486 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1487
1488         * ada-valprint.c (ada_val_print_1): Replace calls to
1489         ada_val_print_1 by calls to val_print.
1490
1491 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1492
1493         * ada-valprint.c (ada_val_print_1): Add parameter "language".
1494         Update calls to self accordingly.  Replace calls to c_val_print
1495         by calls to val_print.
1496
1497 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1498
1499         * ada-valprint.c (print_record): Delete declaration.
1500         (adjust_type_signedness, ada_val_print_1): Likewise.
1501         (ada_val_print): Move function implementation down.
1502         (print_variant_part, print_field_values, print_record):
1503         Move function implementation up.
1504
1505 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1506
1507         * python/py-type.c (typy_get_name): New function.
1508         (type_object_getset): Add entry for attribute "name".
1509         * NEWS: Add entry mentioning this new attribute.
1510
1511 2014-01-07  Yao Qi  <yao@codesourcery.com>
1512
1513         * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1514         statement.
1515
1516 2014-01-07  Yao Qi  <yao@codesourcery.com>
1517
1518         * gnu-nat.c (info_port_rights): Add qualifier const to
1519         argument args.
1520
1521 2014-01-07  Yao Qi  <yao@codesourcery.com>
1522
1523         * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1524
1525 2014-01-07  Yao Qi  <yao@codesourcery.com>
1526
1527         * gnu-nat.c (make_inf) Update declaration.
1528         (make_inf): Make it static.
1529         (inf_set_traced): Likewise.
1530         (inf_port_to_thread, inf_task_died_status): Likewise.
1531
1532 2014-01-07  Yao Qi  <yao@codesourcery.com>
1533
1534         * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1535
1536 2014-01-07  Yao Qi  <yao@codesourcery.com>
1537
1538         * gnu-nat.c (_initialize_gnu_nat): Declare.
1539
1540 2014-01-07  Yao Qi  <yao@codesourcery.com>
1541
1542         * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1543         'enum bfd_endian'.
1544         (struct gdbarch_info) <byte_order>: Change type to
1545         'enum bfd_endian'.
1546         <byte_order_for_code>: Likewise.
1547         * gdbarch.c, gdbarch.h: Regenerated.
1548
1549 2014-01-06  Sasha Smundak  <asmundak@google.com>
1550
1551         * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1552
1553 2014-01-06  Tom Tromey  <tromey@redhat.com>
1554
1555         * doublest.c (convert_doublest_to_floatformat): Use const, not
1556         CONST.
1557         * somread.c (som_symtab_read): Likewise.
1558
1559 2014-01-07  Hui Zhu  <hui@codesourcery.com>
1560
1561         * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1562         (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1563         (gdb_bfd_fopen): Ditto.
1564         (gdb_bfd_openr): Ditto.
1565         (gdb_bfd_openw): Ditto.
1566         (gdb_bfd_openr_iovec): Ditto.
1567         (gdb_bfd_fdopenr): Ditto.
1568         * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1569         * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1570         with xstrdup.
1571         * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1572         with xstrdup.
1573         * symfile-mem.c (symbol_file_add_from_memory): Removed
1574         gdb_bfd_stash_filename.
1575
1576 2014-01-03  Doug Evans  <dje@google.com>
1577
1578         * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1579         output.
1580
1581 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1582
1583         Update year range in copyright notice of all files.
1584
1585 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1586
1587         * top.c (print_gdb_version): Set copyright year to 2014.
1588
1589 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1590
1591         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1592
1593 For older changes see ChangeLog-2013.
1594 \f
1595 Local Variables:
1596 mode: change-log
1597 left-margin: 8
1598 fill-column: 74
1599 version-control: never
1600 coding: utf-8
1601 End: