1 2009-05-14 Jon Beniston <jon@beniston.com>
3 * MAINTAINERS: Add Jon Beniston to write after approval list.
5 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
7 * objc-lang.c (objc_objfile_data): New variable.
8 (find_methods): Skip objfiles without Obj-C methods.
9 (_initialize_objc_lang): New function.
11 2009-05-13 Joel Brobecker <brobecker@adacore.com>
13 * c-lang.c (print_wchar): Remove unnecessary cast.
15 2009-05-12 Jim Blandy <jimb@red-bean.com>
17 * MAINTAINERS: Remove self as m32c target maintainer.
19 2009-05-12 Pedro Alves <pedro@codesourcery.com>
21 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
22 * command.h (deprecated_add_set_cmd): Delete declaration.
23 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
24 'set debug gnu-nat' and 'show debug gnu-nat'.
25 * i386-nat.c (_initialize_i386_nat): Replace 'maint
26 show-debug-registers' with 'maint set show-debug-registers' and
27 'maint show show-debug-registers'.
28 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
29 show-debug-registers' with 'maint set show-debug-registers' and
30 'maint show show-debug-registers'.
32 2009-05-12 Joel Brobecker <brobecker@adacore.com>
34 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
35 pushing it on the output obstack.
37 2009-05-11 Joel Brobecker <brobecker@adacore.com>
39 Fix internal error on breaking at a multi-locations caller source line.
40 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
41 command with no parameters.
43 2009-05-11 Pedro Alves <pedro@codesourcery.com>
45 * linux-nat.c (enum sigchld_state): Delete.
46 (linux_nat_async_events_state): Delete.
47 (struct waitpid_result): Delete.
48 (waitpid_queue): Delete.
49 (queued_waitpid_1): Delete.
50 (async_file_flush): New.
51 (queued_waitpid, push_waitpid): Delete.
52 (async_file_mark): New.
53 (drain_queued_events): Delete.
54 (my_waitpid): Remove locally queued events handling.
55 (linux_test_for_tracefork): Upjust.
56 (linux_child_follow_fork): Ditto.
57 (sync_sigchld_action): Delete.
58 (blocked_mask): Reinstate.
59 (async_sigchld_action): Rename to...
60 (sigchld_action): ... this.
61 (block_child_signals): New.
62 (restore_child_signals_mask): New.
63 (lin_lwp_attach_lwp): Adjust.
64 (linux_nat_create_inferior): Ditto.
65 (linux_nat_attach): Also use lp->status in async mode.
66 (get_pending_status): Don't use queued_waitpid.
67 (linux_nat_detach): Don't drain locally queued events.
68 (linux_nat_resume): Allow pending wait statuses stored lp->status
69 in async mode. If returning early due to a pending event,
70 re-register the event source.
71 (stop_wait_callback): Allow pending wait statuses stored
72 lp->status in async mode.
73 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
74 (linux_nat_wait): Rename to ...
75 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
76 lp->status in async mode. Always add WNOHANG to the waitpid
77 options in async mode.
78 (linux_nat_wait): New.
79 (kill_callback): Don't drain locally queued events.
80 (sigchld_handler): Rewrite.
81 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
82 refer to "set target-async".
83 (linux_nat_async_mask): If in non-stop, and re-enabling async
84 mode, re-register the target event source in the event loop.
85 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
86 (get_pending_events, async_sigchld_handler)
87 (linux_nat_async_events): Delete.
88 (handle_target_event): New.
89 (linux_nat_async_file_handler): Delete.
90 (linux_async_pipe): New.
91 (linux_nat_async): Only re-register in the event loop if not
92 registered yet. Always notify the event-loop once if enabling the
94 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
95 lp->status, not in the locally queued event list.
96 (linux_nat_stop): Don't mask out async event handling.
97 (linux_nat_setup_async): Delete.
98 (_initialize_linux_nat): Adjust.
99 (lin_thread_get_thread_signals): blocked_mask is global again.
102 2009-05-11 Pierre Muller <muller.u-strasbg.fr>
106 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
107 (target_stoppped_by_watchpoint): New macro.
108 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
109 (target_have_steppable_watchpoint): New macro.
110 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
111 (target_have_continuable_watchpoint): New macro.
112 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
113 (target_can_use_hardware_watchpoint): New macro.
114 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
115 (target_region_ok_for_hw_watchpoint): New macro.
117 * breakpoint.c (update_watchpoint): Use new macros.
118 (bpstat_alloc): Likewise.
119 (create_breakpoint): Likewise.
120 (watch_command_1): Likewise.
121 (can_use_hardware_watchpoint): Likewise.
122 (do_enable_breakpoint): Likewise.
123 * infrun.c (handle_inferior_event): Adapt to new macros.
124 * mips-tdep.c (mips_gdbarch_init): Update comments.
125 * procfs.c (procfs_set_watchpoint): Update comment.
126 (procfs_insert_watchpoint): Adapt to new macros.
127 * remote-m32r-sdi.c (m32r_stop):
128 * remote-mips.c (mips_remove_breakpoint):
129 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
130 (debug_to_stopped_by_watchpoint): Likewise.
133 2009-05-10 Pierre Muller <muller.u-strasbg.fr>
135 * src/gdb/target.h: Remove all tests for already defined
136 macros. All macros defined here should not be set in config
139 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
141 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
142 (have_ptrace_getsetfpregs): Likewise.
143 fetch_all_gp_regs): New function.
144 (fetch_gp_regs): New function.
145 (fetch_all_fp_regs): Likewise.
146 (fetch_fp_regs): New function.
147 (fetch_ppc_registers): Using the new methods to fetch general-
148 purpose and floating-pointer registers.
149 (store_all_gp_regs): New function.
150 (store_gp_regs): Likewise.
151 (store_all_fp_regs): New function.
152 (store_fp_regs): Likewise.
153 (store_ppc_registers): Using the new methods to store general-
154 purpose and floating-pointer registers.
156 2009-05-08 Doug Evans <dje@google.com>
158 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
160 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
162 * MAINTAINERS (Write After Approval): Add self.
164 2009-05-07 Joel Brobecker <brobecker@adacore.com>
166 * gdbarch.h (target_gdbarch): Add comment documenting this global.
168 2009-05-06 Joel Brobecker <brobecker@adacore.com>
170 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
172 * configure: Regenerate.
174 2009-05-06 Joel Brobecker <brobecker@adacore.com>
176 * utils.c: Add include of gdb_usleep.h.
177 (defaulted_query): Detect false EOF conditions that happen
178 on terminals opened with the O_NONBLOCK flag when there is
181 2009-05-06 Pedro Alves <pedro@codesourcery.com>
183 * inferior.c (add_inferior): Move observer_notify_new_inferior
185 (add_inferior_silent): ... here.
187 2009-05-06 Pierre Muller <muller.u-strasbg.fr>
188 Pedro Alves <pedro@codesourcery.com>
190 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
191 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
193 (procfs_stopped_by_watchpoint): Made static, ptid argument
195 (_initialize_procfs): Register new watchpoint related target
197 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
198 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
199 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
200 (target_insert_watchpoint, target_remove_watchpoint): Delete.
201 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
203 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
204 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
205 (target_insert_watchpoint, target_remove_watchpoint): Delete.
206 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
208 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
209 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
210 (target_insert_watchpoint, target_remove_watchpoint): Delete.
211 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
214 2009-05-06 Hui Zhu <teawater@gmail.com>
216 * i386-tdep.c (i386_process_record): Change bzero to memset.
218 2009-05-06 Hui Zhu <teawater@gmail.com>
220 * NEWS: Add item for process record and replay.
222 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
224 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
226 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
228 * inferior.h (read_pc, write_pc): Remove.
229 * regcache.c (read_pc, write_pc): Remove.
231 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
233 (handle_inferior_event): Use regcache_read_pc instead of read_pc
234 when determining value of stop_pc. Replace subsequent uses of
235 read_pc by inspecting already-retrieved stop_pc value.
236 (keep_going): Use regcache_read_pc instead of read_pc.
238 * breakpoint.c (watchpoint_check): Use current frame architecture
239 and PC instead of current_gdbarch and read_pc ().
240 * tracepoint.c (set_traceframe_context): Replace PC argument
242 (trace_start_command, finish_tfind_command): Update calls.
243 (finish_tfind_command): Compare frame IDs to identify transitions
245 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
246 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
247 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
248 of read_pc and write_pc.
249 (store_register): Make regcache argument non-const. Update call
250 to exec_one_dummy_insn.
252 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
253 * infcmd.c (post_create_inferior): Likewise.
254 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
255 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
256 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
257 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
258 * linux-fork.c (fork_load_infrun_state): Likewise.
259 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
260 * record.c (record_wait): Likewise.
261 * procfs.c (procfs_wait): Likewise.
262 * remote-mips.c (common_open, mips_wait): Likewise.
263 * remote-m32r-sdi.c (m32r_resume): Likewise.
265 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
266 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
267 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
268 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
269 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
271 * solib-darwin.c: Include "regcache.h".
272 * solib-pa64.c: Include "regcache.h".
273 * solib-svr4.c: Include "regcache.h.".
275 * symfile.c: Do not mention read_pc or write_pc in comments.
276 * dink32-rom.c: Likewise.
277 * m32r-rom.c: Likewise.
278 * mips-tdep.c: Likewise.
280 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
282 * fork-child.c (startup_inferior): Move setting stop_pc ...
283 * infcmd.c (post_create_inferior): ... to here.
285 2009-05-04 Michael Snyder <msnyder@vmware.com>
287 * NEWS: Add item for reverse debugging commands.
289 2009-05-04 Pedro Alves <pedro@codesourcery.com>
291 * go32-nat.c (go32_stop): Delete.
292 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
293 (go32_create_inferior): Don't call go32_stop or
295 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
297 (init_go32_ops): Don't register go32_stop.
299 2009-05-02 Eli Zaretskii <eliz@gnu.org>
301 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
304 * infcall.c (find_function_addr): Avoid compiler warnings for
307 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
309 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
310 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
312 2009-05-01 Doug Evans <dje@google.com>
314 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
317 2009-05-01 Eli Zaretskii <eliz@gnu.org>
319 * record.c (_initialize_record): Reformat and clarify doc strings
320 for stop-at-limit and insn-number-max.
322 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
324 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
326 Make specifiable the make_function_type type memory ownership.
327 * gdbtypes.c (make_function_type): New parameter `objfile', use it
328 explicitely instead of TYPE-initialized removed local variable
329 `objfile'. Describe `objfile' it in the function comment.
330 (lookup_function_type): Update make_function_type callers.
331 * gdbtypes.h (make_function_type): Update the prototype.
332 * jv-lang.c (java_link_class_type): Update make_function_type callers.
333 * dwarf2read.c (read_subroutine_type): Likewise.
334 * stabsread.c (read_type): Likewise.
336 2009-05-01 Eli Zaretskii <eliz@gnu.org>
338 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
339 printing a bogus "Thread <main>".
340 (go32_thread_alive): Don't return 1 for null_ptid.
342 * i386-tdep.c (i386_go32_init_abi): Override the number of
343 registers due to non-support of SSE.
345 2009-04-30 Anthony Green <green@moxielogic.com>
347 * configure.tgt: Link the moxie simulator in with gdb.
349 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
351 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
354 2009-04-30 Hui Zhu <teawater@gmail.com>
355 Michael Snyder <msnyder@vmware.com>
357 I386 Linux process record and replay support.
359 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
360 This struct has the argument for the function
361 "record_linux_system_call".
362 (i386_linux_intx80_sysenter_record): New function. Parse the
363 system call instruction and call function
364 "record_linux_system_call" to record execute log.
365 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
366 Set "i386_linux_intx80_sysenter_record" to
367 "i386_intx80_record" and "i386_sysenter_record".
369 2009-04-30 Hui Zhu <teawater@gmail.com>
370 Michael Snyder <msnyder@vmware.com>
372 I386 architecture process record and replay support.
374 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
375 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
377 (aflag, dflag, override, modrm, mod, reg, rm, ot,
378 i386_record_pc): New variables. Ditto.
379 (i386_record_modrm, i386_record_lea_modrm_addr,
380 i386_record_lea_modrm): New functions. Ditto.
381 (i386_process_record): New function. Parse the instruction in
382 address "addr" and record the values of registers and memory
383 that will be changed by this instruction.
384 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
385 "process_record" interface.
386 * i386-tdep.h (gdbarch_tdep): New function pointers
387 "i386_intx80_record" and "i386_sysenter_record" that point to
388 the function that can record "intx80" and "sysenter" execute
391 2009-04-30 Hui Zhu <teawater@gmail.com>
392 Michael Snyder <msnyder@vmware.com>
394 * infrun.c (use_displaced_stepping): Return false if process
395 record and replay target is used.
396 (proceed): Call function "record_not_record_set" if pocess
397 record and replay target is used.
399 2009-04-30 Hui Zhu <teawater@gmail.com>
400 Michael Snyder <msnyder@vmware.com>
402 Linux process record and replay support.
404 * Makefile.in (ALLDEPFILES): Add linux-record.c.
405 (ALL_TARGET_OBS): Add linux-record.o.
406 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
407 (i[34567]86-*-linux*): Add linux-record.o.
408 * linux-record.c, linux-record.h: New file.
410 2009-04-30 Hui Zhu <teawater@gmail.com>
411 Michael Snyder <msnyder@vmware.com>
413 Process record and replay target.
415 * Makefile.in (SFILES): Add record.c.
416 (COMMON_OBS): Add record.o.
417 * record.c, record.h: New file.
419 2009-04-30 Hui Zhu <teawater@gmail.com>
420 Michael Snyder <msnyder@vmware.com>
422 * target.h (strata): New stratum "record_stratum".
424 2009-04-30 Hui Zhu <teawater@gmail.com>
425 Michael Snyder <msnyder@vmware.com>
427 GDBARCH interface for process record and replay.
429 * gdbarch.sh (process_record): This interface point to the
430 function that records the inferior execute log.
432 2009-04-29 Doug Evans <dje@google.com>
434 * i386-nat.c (child_post_startup_inferior): Delete, unused.
436 2009-04-29 Pedro Alves <pedro@codesourcery.com>
438 * breakpoint.c (print_exception_catchpoint): Access `b' directly
439 instead of `b->loc->owner'.
440 (print_mention_exception_catchpoint): Ditto.
442 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
444 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
446 2009-04-27 Tom Tromey <tromey@redhat.com>
448 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
450 2009-04-27 Jerome Guitton <guitton@adacore.com>
452 * symtab.c (append_exact_match_to_sals): New function, extracted
453 from expand_line_sal.
454 (expand_line_sal): Use append_exact_match_to_sals to append exact
455 matches. If none found, append all best items.
457 2009-04-27 Jerome Guitton <guitton@adacore.com>
459 * main.c (captured_main): Move gdbinit lookups after gdb_init.
461 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
464 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
465 (read_func_scope): Call inherit_abstract_dies.
467 2009-04-25 Eli Zaretskii <eliz@gnu.org>
469 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
470 sparc-sol2-nat.c and sparc-sol2-tdep.c.
472 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
474 2009-04-24 Pierre Muller <muller.u-strasbg.fr>
476 ARI change: Use "/* ARI: rule */" pattern.
477 * utils.c: Update ARI patterns.
478 * gdb_dirent.h: Likewise.
480 2009-04-23 Anthony Green <green@moxielogic.com>
482 * MAINTAINERS: Add moxie target.
483 * configure.tgt: Add moxie-*-elf target.
484 * moxie-tdep.c: New file.
485 * moxie-tdep.h: New file.
487 2009-04-23 Joel Brobecker <brobecker@adacore.com>
489 * ada-lang.c: Remove an extra empty line. No code change.
491 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
493 Fix double free on error inserting the breakpoint instruction.
494 * breakpoint.c (create_breakpoints): Move the
495 update_global_location_list call to ...
496 (break_command_really): ... here together with the second local call
497 both unified after all the cleanups.
499 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
500 Tom Tromey <tromey@redhat.com>
502 * configure, config.in: Regenerate.
503 * configure.ac: Support for relocatable GDB datadir. Use
504 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
505 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
506 * top.c (init_main): Add "set data-directory".
507 * defs.h (gdb_datadir): Declare.
508 * main.c (gdb_datadir): New global.
509 (captured_main): Initialize gdb_datadir. Use relocate_directory.
510 (relocate_path): New function.
511 (relocate_directory): Likewise.
512 (get_init_files): Use relocate_path.
513 (README): Mention --with-gdb-datadir.
515 2009-04-23 Joel Brobecker <brobecker@adacore.com>
517 * ada-tasks (task_command_1): Call target_find_new_threads.
519 2009-04-23 Joel Brobecker <brobecker@adacore.com>
521 * stack.c (do_gdb_disassembly): Print the exception message if an
522 error was thrown while trying to perform the disassembly.
524 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
526 * varobj.c (free_variable): Replace free_current_contents by xfree.
528 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
530 * arm-linux-nat.c (fetch_register, store_register): Use
531 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
532 * arm-linux-tdep.c (arm_linux_supply_gregset,
533 arm_linux_collect_gregset): Likewise.
534 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
535 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
537 2009-04-22 Hui Zhu <teawater@gmail.com>
539 * stack.c (_initialize_stack): Set the default of
540 disassemble-next-line to off.
542 2009-04-21 Tom Tromey <tromey@redhat.com>
544 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
545 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
547 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
549 * configure.ac: Add quotes to not lose brackets in help text.
550 * configure: Rebuild.
552 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
554 * configure.ac: Don't postprocess Makefile in config.status.
555 Substitute GDB_NM_FILE. Don't substitute nm_h.
556 * Makefile.in (GDB_NM_FILE): Substitute.
557 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
558 * configure: Regenerate.
559 * gnulib/Makefile.in: Regenerate.
561 2009-04-21 Joseph Myers <joseph@codesourcery.com>
563 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
564 --with-htmldir): New.
565 * configure: Regenerate.
567 2009-04-21 Tom Tromey <tromey@redhat.com>
569 * configure: Rebuild.
570 * configure.ac: Use lower case for start of help strings. Clean
571 up --with-sysroot help.
573 2009-04-21 Tom Tromey <tromey@redhat.com>
575 * configure: Rebuild.
576 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
577 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
580 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
582 ARI fix: remove "%p".
583 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
584 (ia64_sigtramp_frame_this_id): Ditto.
585 (ia64_libunwind_frame_this_id): Ditto.
586 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
587 * symmisc.c (maintenance_info_psymtabs): Ditto.
589 2009-04-21 Joseph Myers <joseph@codesourcery.com>
591 * configure.ac (--with-relocated-sources): New.
592 * configure, config.in: Regenerate.
593 * source.c (add_substitute_path_rule): Remove static.
594 * source.h (add_substitute_path_rule): Declare.
595 * main.c: Include "source.h".
596 (captured_main): Add substitution rule if RELOC_SRCDIR.
598 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
600 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
602 2009-04-20 David Daney <ddaney@caviumnetworks.com>
604 * NEWS: Mention MIPS/Linux hardware watchpoint support.
606 2009-04-20 David Daney <ddaney@caviumnetworks.com>
608 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
609 (maint_show_dr, super_close): New variables.
610 (super_fetch_registers, super_store_registers): Make static.
611 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
612 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
613 (pt_watch_style): Define new enum.
614 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
616 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
618 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
619 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
620 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
621 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
622 (type_to_irw, fill_mask, try_one_watch)
623 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
624 (mips_linux_new_thread, populate_regs_from_watches)
625 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
626 (mips_linux_close): New functions.
627 (_initialize_mips_linux_nat): Register watchpoint functions with
628 the target_ops. Add show-debug-regs maintenance command.
630 2009-04-20 David Daney <ddaney@caviumnetworks.com>
632 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
634 2009-04-19 Pedro Alves <pedro@codesourcery.com>
636 * NEWS: Mention gdbserver support for x86 Windows CE.
638 2009-04-19 Eli Zaretskii <eliz@gnu.org>
640 * config/djgpp/fnchange.lst: Fix typos.
642 Set default host and target charsets in the DJGPP port.
644 * config/djgpp/config.sed (am_cv_langinfo_codeset)
645 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
646 in all configure scripts that define ac_cv_env_CPP_value.
648 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
651 * config/djgpp/nl_types.h: New file.
653 * config/djgpp/langinfo.h: New file.
655 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
657 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
659 * Makefile.in (MAKEHTML): Set to makeinfo --html.
660 (MAKEHTMLFLAGS): Set to empty.
662 2009-04-18 Eli Zaretskii <eliz@gnu.org>
664 * NEWS: Mention all new set/show commands added since GDB 6.8 was
667 * go32-nat.c (go32_sysinfo): Check if the call to
668 __dpmi_get_capabilities fills the buffer with information, and
669 don't use the buffer if not.
671 2009-04-17 Tom Tromey <tromey@redhat.com>
673 * charset.c (_initialize_charset): Add special case for "646".
675 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
677 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
678 * configure: Regenerate.
679 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
680 configure substitutions.
681 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
683 2009-04-17 Pierre Muller <muller.u-strasbg.fr>
685 ARI fix: Do not use %p, replace by call to host_address_to_string
687 * darwin-nat.c (darwin_xfer_partial): Apply change.
688 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
689 * gnu-nat.h (proc_debug): Ditto.
690 * symmisc.c (maintenance_info_symtabs): Ditto.
691 (maintenance_info_psymtabs): Ditto.
692 * windows-nat.c (handle_load_dll): Ditto.
693 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
694 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
696 2009-04-17 Joseph Myers <joseph@codesourcery.com>
698 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
700 (sparc-*-linux*): Likewise.
702 2009-04-17 Eli Zaretskii <eliz@gnu.org>
704 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
707 2009-04-16 Pedro Alves <pedro@codesourcery.com>
709 * remote.c (remote_query_attached): Fix pasto in packet_ok result
712 2009-04-16 Joel Brobecker <brobecker@adacore.com>
714 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
715 Revert the previous change. Might not be correct, actually.
717 2009-04-16 Joel Brobecker <brobecker@adacore.com>
719 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
720 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
721 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
722 Remove declaration. These are non-existent functions.
724 2009-04-16 Joel Brobecker <brobecker@adacore.com>
726 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
727 Fix a compilation warning on mips-irix due to casting from
728 a pointer of different size.
730 2009-04-16 Joel Brobecker <brobecker@adacore.com>
732 * ada-lang.c (symtab_for_sym): Delete.
733 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
735 2009-04-16 Joel Brobecker <brobecker@adacore.com>
737 * ada-lang.c (extract_string): Delete.
738 (ada_main_name): Reimplement using target_read_string instead of
741 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
743 * m68klinux-nat.c: Remove obsolete comment.
744 (fetch_register, store_register): Don't call
745 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
746 which are always nops here.
748 2009-04-14 Tom Tromey <tromey@redhat.com>
750 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
751 (c_printstr): Likewise.
752 * charset.c: Include gdb_wait.h.
753 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
754 (find_charset_names): Use pexecute. Handle libiconv's output.
756 (_initialize_charset): Use xstrdup.
757 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
759 (INTERMEDIATE_ENCODING): New define.
760 * configure, config.in: Rebuild.
761 * configure.ac: Check for btowc.
763 2009-04-15 Tom Tromey <tromey@redhat.com>
765 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
767 2009-04-15 Eli Zaretskii <eliz@gnu.org>
769 * utils.c (parse_escape): Initialize target_char to pacify GCC.
771 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
773 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
775 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
777 ARI fix: sprintf rule.
778 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
779 * ada-lang.c (add_angle_brackets): Use xstrprintf.
780 (ada_decode): Replace sprintf by xsnprintf.
781 (find_old_style_renaming_symbol): Ditto.
782 (ada_to_fixed_type_1, ada_enum_name): Ditto.
785 2009-04-14 Joel Brobecker <brobecker@adacore.com>
787 * target.c (target_mourn_inferior): Call bfd_cache_close_all
788 after having executed the target mourn_inferior routine.
790 2009-04-14 Eli Zaretskii <eliz@gnu.org>
792 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
795 2009-04-13 David Daney <ddaney@caviumnetworks.com>
797 * infrun.c (maybe_software_singlestep): New function.
798 (resume): Call maybe_software_singlestep.
799 (handle_inferior_event): Same.
801 2009-04-13 Tom Tromey <tromey@redhat.com>
803 * python/python-frame.c (frapy_richcompare): Return
804 Py_NotImplemented, not an error. Handle Py_NE as well.
806 2009-04-13 Eli Zaretskii <eliz@gnu.org>
808 * charset.c (EILSEQ): Define if not defined by system headers.
810 2009-04-11 Eli Zaretskii <eliz@gnu.org>
812 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
813 to be consistent with renaming config.intl.in into config_intl.in.
815 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
816 consistent with the change from 2008-11-09.
818 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
820 * gdbtypes.c: Remove excessive parentheses at the return keywords.
821 * varobj.c (varobj_invalidate): Fix indentation.
822 * varobj.c (varobj_invalidate): Fix formatting text width.
824 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
826 Implement -exec-jump.
828 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
829 * mi/mi-main.c (mi_cmd_exec_jump): New.
830 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
832 2009-04-07 Doug Evans <dje@google.com>
834 * symfile.c (symbol_file_clear): Fix indentation.
836 2009-04-06 Mark Kettenis <kettenis@gnu.org>
838 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
840 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
842 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
843 (ppc_linux_auxv_parse): New function.
844 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
845 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
847 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
849 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
850 BFD to contents of SPU name note.
851 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
852 with "from_tty" argument 1 instead of 0.
854 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
857 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
858 Create the symbol in local scope.
859 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
861 2009-04-02 Keith Seitz <keiths@redhat.com>
863 * stabsread.c (read_member_functions): GCC may emit an extra space
864 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
865 whitespace when looking for these functions.
867 2009-04-01 Joel Brobecker <brobecker@adacore.com>
869 Change the default value for "set print frame-arguments" to scalars.
871 * stack.c (print_frame_arguments): Set initial value to "scalars".
873 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
875 * mips-tdep.c (mips_numeric_register_alieses): New definition.
876 (mips_gdbarch_init): Add user registers from
877 mips_numeric_register_aliases.
879 2009-04-01 Joel Brobecker <brobecker@adacore.com>
881 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
883 2009-04-01 Joel Brobecker <brobecker@adacore.com>
885 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
886 this is the last one.
888 2009-04-01 Pedro Alves <pedro@codesourcery.com>
890 * remote.c (append_resumption): New.
891 (remote_vcont_resume): Use it.
893 2009-04-01 Joel Brobecker <brobecker@adacore.com>
895 * windows-nat.c (+windows_get_ada_task_ptid): New function.
896 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
898 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
899 Keith Seitz <keiths@redhat.com>
900 Jan Kratochvil <jan.kratochvil@redhat.com>
903 * Makefile.in (dbxread.o): Update.
904 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
905 * dwarf2read.c (GDB_FORM_cached_string): New.
906 (read_partial_die): Use dwarf2_canonicalize_name.
907 (dwarf2_linkage_name): Use dwarf2_name.
908 (dwarf2_canonicalize_name): New.
909 (dwarf2_name): Use dwarf2_canonicalize_name.
910 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
911 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
912 * symtab.c (lookup_symbol_in_language): Canonicalize input before
914 * cp-name-parser.y: operator() requires two parameters,
915 according to libiberty.
916 * minsyms.c (lookup_minimal_symbol): Canonicalize input
920 2009-03-31 Joel Brobecker <brobecker@adacore.com>
922 Provide support for (Ada) task-specific breakpoints.
924 * ada-lang.h (ada_get_task_number): Add declaration.
925 (breakpoint_ada_task_match): Delete declaration.
926 * ada-tasks.c (ada_get_task_number): Make non-static.
927 * breakpoint.h (struct breakpoint): Add field "task".
928 * breakpoint.c (print_one_breakpoint_location): Add handling of
929 task-specific breakpoints.
930 (create_breakpoint, create_breakpoints, find_condition_and_thread):
931 New parameter "task".
932 (break_command_really): Update calls to find_condition_and_thread
933 and create_breakpoints.
934 (breakpoint_re_set_one): Update call to find_condition_and_thread.
937 2009-03-31 Joel Brobecker <brobecker@adacore.com>
939 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
941 2009-03-31 Pedro Alves <pedro@codesourcery.com>
943 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
944 if the thread's ptid without a thread id field is in the list
945 before calling thread_change_ptid.
946 (extended_remote_attach_1): In non-stop mode, do not rely on
947 querying the current thread, instead, query the thread list, and
948 select the first thread of the process.
949 * gdbthread.h (first_thread_of_process): Declare.
950 * thread.c (first_thread_of_process): Define.
952 2009-03-30 Stan Shebs <stan@codesourcery.com>
954 Make tracepoints into a type of breakpoint.
955 * breakpoint.h (enum bptype): Add bp_tracepoint.
956 (struct breakpoint): Add fields step_count, pass_count, actions.
957 (get_tracepoint, get_tracepoint_by_number): Declare.
958 (all_tracepoints): Declare.
959 * breakpoint.c: Include tracepoint.h, readline.h.
960 (ALL_TRACEPOINTS): Move here from tracepoint.c.
961 (tracepoint_count): Ditto.
962 (should_be_inserted): GDB does not insert tracepoints itself.
963 (print_it_typical): Add tracepoint case.
964 (bpstat_what): Ditto.
965 (print_one_breakpoint_location): Ditto, and add printing for
966 pass count, step count, and action list.
967 (user_settable_breakpoint): Add tracepoint case.
968 (allocate_bp_location): Ditto.
969 (set_breakpoint_location_function): Ditto.
970 (disable_breakpoints_in_shlibs): Ditto.
972 (break_command_really): Add argument traceflag, use to choose
973 basic breakpoint type.
974 (break_command_1): Pass extra argument.
975 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
976 (breakpoint_re_set_one): Add tracepoint case.
977 (disable_command, enable_command): Ditto.
978 (set_tracepoint_count): Move here from tracepoint.c.
979 (trace_command): Move here from tracepoint.c and use
980 break_command_really.
981 (tracepoints_info): Move here from tracepoint.c and call
983 (enable_trace_command): Move here from tracepoint.c and call
985 (disable_trace_command): Move here from tracepoint.c and call
987 (delete_trace_command): Move here from tracepoint.c and call
989 (trace_pass_command): Move here from tracepoint.c.
990 (get_tracepoint_by_number): Ditto.
991 (tracepoint_save_command): Ditto.
992 (get_tracepoint): New function.
993 (all_tracepoints): New function.
994 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
995 deprecate "enable trace" and "disable trace" commands.
996 * tracepoint.h (struct tracepoint): Remove.
997 (tracepoint_chain): Remove decl.
998 (deprecated_create_tracepoint_hook): Remove decl.
999 (deprecated_delete_tracepoint_hook): Remove decl.
1000 (deprecated_modify_tracepoint_hook): Remove decl.
1001 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
1002 (free_actions): Update signature.
1003 (validate_actionline): Update signature.
1004 (end_actions_pseudocommand): Declare.
1005 (while_stepping_pseudocommand): Declare.
1006 * tracepoint.c: Include breakpoint.h.
1007 (tracepoint_chain, tracepoint_count): Remove.
1008 (free_actions, make_cleanup_free_actions): Update signature.
1009 (trace_command, set_raw_tracepoint): Remove.
1010 (trace_mention): Remove.
1011 (tracepoints_info): Remove.
1012 (tracepoint_operation, map_args_over_tracepoints): Remove.
1013 (get_tracepoint_by_number): Remove.
1014 (enable_trace_command, disable_trace_command): Remove.
1015 (delete_trace_command, trace_pass_command): Remove.
1016 (trace_actions_command, read_actions): Update signature.
1017 (validate_actionline): Update signature, use bp loc.
1018 (encode_actions): Ditto.
1019 (download_tracepoint): New function, body of trace_start_command.
1020 (trace_start_command): Call it, use all_tracepoints.
1021 (tracepoint_save_command): Remove.
1022 (tracepoint_dump_command): Use get_tracepoint.
1023 (end_actions_pseudocommand): Make globally visible.
1024 (while_stepping_pseudocommand): Ditto.
1025 (_initialize_tracepoint): Move command definitions to breakpoint.c.
1027 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
1029 Expose frames to Python.
1030 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
1031 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
1032 (python-frame.o): New target.
1033 * python/python-frame.c: New file.
1034 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
1035 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
1036 gdbpy_initialize_frames): New prototypes.
1037 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
1038 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
1040 * stack.c (find_frame_funname): New function, factored out of
1042 (print_frame): Call find_frame_funname.
1043 * stack.h (find_frame_funname): Add prototype.
1045 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1047 Remove unused value_object attribute `owned_by_gdb'.
1048 * python/python-value.c (value_object): Remove owned_by_gdb
1050 (valpy_dealloc): Remove reference to self->owned_by_gdb.
1051 (valpy_new): Likewise.
1052 (value_to_value_object): Likewise.
1054 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1056 Change gdb.Value.address from a method to an attribute.
1057 * python/python-value.c (value_object): Add `address' element.
1058 (valpy_dealloc): Decrement reference to self->address if set.
1059 (valpy_new): Initialize val_obj->address.
1060 (valpy_address): Rename to ...
1061 (valpy_get_address): ... this. Change signature from method to
1062 attribute. Update self->address if not set.
1063 (value_to_value_object): Initialize val_obj->address.
1064 (value_object_getset): Add `address' element.
1065 (value_object_methods): Remove `address' element.
1067 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
1069 * observer.sh: Set LANG/LC_ALL to C, not c.
1071 2009-03-28 Kevin Buettner <kevinb@redhat.com>
1073 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
1076 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1078 * remote.c (remote_stop_ns): If multi-process extensions are off,
1079 and GDB is requesting the whole process to stop, sent "vCont;t",
1082 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1084 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
1087 2009-03-27 Eli Zaretskii <eliz@gnu.org>
1089 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
1091 2009-03-26 Doug Evans <dje@google.com>
1093 * thread.c (do_restore_current_thread_cleanup): Redo test for
1094 whether to restore old->inferior_ptid.
1096 2009-03-26 Tom Tromey <tromey@redhat.com>
1098 * breakpoint.c (resolve_sal_pc): Preserve original line number
1099 when skipping prologue.
1101 2009-03-26 Doug Evans <dje@google.com>
1103 * thread.c (inferior_thread) Remove "extern" in definition.
1105 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
1107 Add gdb.Value.is_optimized_out attribute.
1108 * python/python-value.c (valpy_get_is_optimized_out): New
1110 (value_object_getset): New variable.
1111 (value_object_type): Initialize tp_getset element.
1113 2009-03-26 Joel Brobecker <brobecker@adacore.com>
1115 Recognize missing DW_AT_location as <value optimized out>.
1117 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
1118 Call add_symbol_to_list.
1120 2009-03-25 Tom Tromey <tromey@redhat.com>
1122 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
1123 * stack.c (print_this_frame_argument_p): Use check_typedef.
1125 2009-03-25 Tom Tromey <tromey@redhat.com>
1127 * configure: Rebuild.
1128 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
1129 Rearrange flags setting. Add comments.
1131 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1133 * config/i386/nm-i386.h: Remove code within
1134 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
1135 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
1137 * config/i386/nm-cygwin64.h: Ditto.
1138 * config/i386/nm-fbsd.h: Ditto.
1139 * config/i386/nm-go32.h: Ditto.
1140 * config/i386/nm-linux.h: Ditto.
1141 * config/i386/nm-linux64.h: Ditto.
1143 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1145 ARI fix: "xasprintf" rule.
1146 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
1148 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1150 * remote.c (remote_start_remote): In non-stop mode, call
1151 init_wait_for_inferior before adding threads and inferiors.
1153 2009-03-25 Joel Brobecker <brobecker@adacore.com>
1155 * breakpoint.c (breakpoint_thread_match): Split a large condition
1156 into several smaller conditions. No behavior change.
1158 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1160 * infrun.c (infrun_thread_thread_exit): New.
1161 (_initialize_infrun): Attach it to the thread_exit observer.
1162 * thread.c (delete_thread_1): Always call the observer, passing it
1164 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
1165 SILENT, return immediately.
1167 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1169 * infrun.c (normal_stop): Use has_stack_frames instead of
1171 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
1172 when there is no thread selected.
1173 (mi_cmd_execute): Don't special case commands that can run without
1174 a valid selected thread.
1175 * top.c (execute_command): Don't special case commands that can
1176 run without a valid selected thread. Use has_stack_frames.
1177 * infcmd.c (ensure_valid_thread): New.
1178 (continue_1, step_1, jump_command, signal_command): Use it.
1179 (detach_command): Error out if there's no selected thread/inferior.
1180 * thread.c (print_thread_info): Allow having no thread selected.
1181 (switch_to_thread): Don't read the PC if there is no current thread.
1182 (do_restore_current_thread_cleanup): Don't record the current
1183 frame if there is no current thread.
1184 (make_cleanup_restore_current_thread): Don't read frame info if
1185 there is no selected thread.
1186 (_initialize_thread): Don't mark commands as
1187 "no_selected_thread_ok".
1188 * frame.c (get_current_frame): Error out if there is no valid
1190 (has_stack_frames): Return false if there is no valid
1192 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
1193 "no_selected_thread_ok".
1194 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
1195 (get_cmd_no_selected_thread_ok): Delete.
1196 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
1197 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
1199 * stack.c (get_selected_block): Use has_stack_frames.
1201 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
1203 Fix size of FPSCR in Power 7 processors.
1204 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
1205 (PPC_FEATURE_HAS_DFP): New #define.
1206 (ppc_linux_read_description): Check for DFP feature instead of
1207 ISA 2.05 to decide on size of the FPSCR.
1209 2009-03-25 Kevin Buettner <kevinb@redhat.com>
1211 * mn10300-tdep.c (trad-frame.h): Don't include.
1212 (prologue-value.h): Include.
1213 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
1214 (struct mn10300_prologue): Define.
1215 (push_reg, translate_rreg, check_for_saved): New functions.
1216 (mn10300_analyze_prologue): Rewrite, using prologue-value
1217 machinery. Handle more instructions than before. Permit
1218 instructions to occur in any order.
1219 (mn10300_skip_prologue): Find the extents of the function
1220 in question; mn10300_analyze_prologue no longer does this.
1221 (mn10300_analyze_frame_prologue): New function.
1222 (mn10300_frame_base): New function.
1223 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
1225 (mn10300_frame_prev_register): Likewise.
1226 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
1227 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
1229 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
1231 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1233 Fix completer problem for filename completion on the first try.
1235 * gdb/completer.h (gdb_completion_word_break_characters): New function.
1236 * gdb/completer.c: Include gdb_assert.h.
1237 (complete_line_internal_reason): New enum.
1238 (complete_line_internal): Change last argument type to
1239 complete_line_internal_reason.
1240 Modify function to handle the different complete_line_internal_reason
1242 (complete_line): Adapt to change in complete_line_internal.
1243 (command_completer): Ditto.
1244 (gdb_completion_word_break_characters): Implement new function.
1245 * top.c (init_main): Set rl_completion_word_break_hook to
1246 gdb_completion_word_break_characters.
1249 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1251 ARI fix: "strlen d_name" rule.
1252 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
1255 2009-03-24 Tom Tromey <tromey@redhat.com>
1256 Pedro Alves <pedro@codesourcery.com>
1258 * configure, config.in: Rebuild.
1259 * configure.ac: Check for libiconvlist.
1260 * charset.c: Check HAVE_LIBICONVLIST.
1261 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
1262 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
1263 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
1265 (INTERNAL_CFLAGS_BASE): Update.
1266 (INTERNAL_LDFLAGS): Update.
1269 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1271 * configure.ac: Initialize the variable $PREFER_CURSES.
1272 * configure: Regenerated.
1274 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1276 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
1277 * configure: Regenerated.
1279 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
1281 ARI fix: "strerror" rule.
1282 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
1283 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
1285 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1287 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
1288 before looking up the fields inside our struct type.
1290 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1292 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
1293 trying to resolve the type qualification.
1295 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1297 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
1298 we try to apply the attribute on the real type, rather than
1299 its associated typedef.
1301 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1303 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
1304 to make sure we try to get the modulus of the actual type, not the
1307 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1309 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
1310 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
1311 to get the real type, not the associated typedef.
1313 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1315 * ada-lang.c (ada_get_field_index): Add handling of the case
1316 when TYPE is a typedef of a struct.
1318 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1320 Add gdb_usleep as a portable version of usleep based on gdb_select.
1321 * gdb_usleep.h, gdb_usleep.c: New files.
1322 * Makefile.in (SFILES): Add gdb_usleep.c.
1323 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
1324 (COMMON_OBS): Add gdb_usleep.o.
1325 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
1326 by call to gdb_usleep.
1328 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1330 * buildsym.c (end_symtab): If we ignore the subfiles, then
1331 unlink the associated symtabs if they were already allocated.
1333 2009-03-23 Jerome Guitton <guitton@adacore.com>
1335 Provide a way to force building of GDB with libcurses.
1336 * configure.ac: Add --with-curses.
1337 * configure: Regenerated.
1339 2009-03-23 Tom Tromey <tromey@redhat.com>
1341 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
1344 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
1346 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
1347 solib_contains_address_p instead of searching.
1349 2009-03-23 Tom Tromey <tromey@redhat.com>
1351 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
1352 (iconv): Make 'inbuf' argument const.
1353 (convert_between_encodings): Use ICONV_CONST.
1354 (wchar_iterate): Likewise.
1356 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1358 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
1359 dynamically loaded function.
1360 (LookupPrivilegeValueA): Ditto.
1361 (OpenProcessToken): Ditto.
1362 (AdjustTokenPrivileges): Rename and define placeholder for address of
1363 dynamically loaded function.
1364 (LookupPrivilegeValueA): Ditto.
1365 (OpenProcessToken): Ditto.
1366 (set_process_privilege): Remove check for loaded functions.
1367 (bad_OpenProcessToken): Define.
1368 (_initialize_loadable): Load token functions from advapi here, setting
1369 OpenProcessToken function to a dummy static function which always return
1370 error if OS doesn't support this functionality.
1372 2009-03-22 Nicolas Roche <roche@adacore.com>
1373 Christopher Faylor <me+cygwin@cgf.cx>
1375 * win32-nat.c (ctrl_c_handler): New function.
1376 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
1377 is run in a separate console.
1379 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1381 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
1382 for dynamically loaded function.
1383 (DebugBreakProcess): Ditto.
1384 (DebugSetProcessKillOnExit): Ditto.
1385 (EnumProcessModules): Ditto.
1386 (GetModuleFileNameExA): Ditto.
1387 (GetModuleInformation): Ditto.
1388 (DebugActiveProcessStop): Rename and define placeholder for address of
1389 dynamically loaded function.
1390 (DebugBreakProcess): Ditto.
1391 (DebugSetProcessKillOnExit): Ditto.
1392 (EnumProcessModules): Ditto.
1393 (GetModuleFileNameExA): Ditto.
1394 (GetModuleInformation): Ditto.
1395 (psapi_loaded): Delete.
1396 (get_module_name): Don't check psapi_loaded, just rely on the fact that
1397 dynamically loaded functions will return failure if they weren't
1399 (has_detach_ability): Delete.
1400 (windows_attach): Remove call to has_detach_ability (). Just rely on
1401 functions being callable.
1402 (bad_DebugActiveProcessStop): Define.
1403 (bad_DebugBreakProcess): Ditto.
1404 (bad_DebugSetProcessKillOnExit): Ditto.
1405 (bad_EnumProcessModules): Ditto.
1406 (bad_GetModuleFileNameExA): Ditto.
1407 (bad_GetModuleInformation): Ditto.
1408 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
1409 dynamic storage here, setting nonexistent functions to dummy static
1410 functions which always return error.
1412 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1414 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
1415 to the about_to_proceed observer notification.
1416 (mi_about_to_proceed): New.
1417 (mi_on_resume): Only output ^running and the prompt here if the
1418 target was proceeded.
1419 * breakpoint.c (breakpoint_proceeded): New static.
1420 (breakpoint_about_to_proceed): New.
1421 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
1422 the about_to_proceed observer notification.
1423 * inferior.h (breakpoint_proceeded): Delete declaration.
1424 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
1425 Notify the about_to_proceed observers.
1426 (struct inferior_status): Delete breakpoint_proceeded member.
1427 (save_inferior_status): Don't save it.
1428 (restore_inferior_status): Don't restore it.
1429 * mi-main.h (mi_proceeded): Declare.
1430 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
1433 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1435 * gdbthread.h (struct thread_info): Add in_infcall member.
1436 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
1437 Remove reverences to suppress_resume_observer. Refresh
1438 `call_thread' after returning from `proceed'.
1439 * infcmd.c (suppress_resume_observer): Delete.
1440 * inferior.h (suppress_resume_observer): Delete declaration.
1441 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
1443 * thread.c (set_running): Remove references to
1444 suppress_resume_observer.
1445 * infrun.c (struct inferior_status): Add in_infcall member.
1446 (save_inferior_status): Save it.
1447 (restore_inferior_status): Restore it.
1449 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1451 * infcall.c (run_inferior_call): Remove references to
1452 suppress_stop_observer.
1453 * infcmd.c (suppress_stop_observer): Delete.
1454 (finish_command_continuation): Remove NOTE. Don't clear
1455 suppress_stop_observer anymore.
1456 (finish_command_continuation_free_arg): Likewise.
1457 (finish_forward): Remove references to suppress_stop_observer.
1458 Call normal_stop observer if we haven't already.
1459 * inferior.h (suppress_stop_observer): Delete.
1460 * infrun.c (normal_stop): When deciding to suppress the
1461 normal_stop observer, check for proceed_to_finish instead of
1462 suppress_stop_observer.
1464 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1466 * symfile.c (symfile_relocate_debug_section): Remove check for
1469 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1470 Jim Blandy <jimb@red-bean.com>
1471 Thiago Jung Bauermann <bauerman@br.ibm.com>
1472 Tom Tromey <tromey@redhat.com>
1474 Miscellaneous fixes to the Python code.
1475 * python/python-cmd.c (cmdpy_init): Accept keyword
1477 * python/python-value.c (valpy_string): Accept keyword
1479 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
1480 Do not call value_to_value_object on NULL RES_VAL.
1481 (value_object_methods): Change `string' entry to also accept
1483 (convert_value_from_python): Return a copy of the value if obj is
1485 (value_object_methods): Mark the `string' method as accepting
1486 keywords, and show method "prototype" in the doc string.
1487 * python/python.c (get_parameter): Don't return inside a
1490 2009-03-20 Tom Tromey <tromey@redhat.com>
1492 Add support for convenience functions in Python.
1493 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
1494 (SUBDIR_PYTHON_SRCS): Add python-function.c.
1495 (python-function.o): New target.
1496 * eval.c: Include "python/python.h" and <ctype.h>.
1497 (evaluate_subexp_standard): Handle values of type
1498 TYPE_CODE_INTERNAL_FUNCTION.
1499 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
1500 * parse.c (write_exp_string): Remove duplicate word in comment.
1501 * python/python-function.c: New file.
1502 * python/python-internal.h (gdbpy_initialize_functions): Add
1504 * python/python.c (_initialize_python): Call
1505 gdbpy_initialize_functions.
1506 * valprint.c (value_check_printable): Handle values of type
1507 TYPE_CODE_INTERNAL_FUNCTION.
1508 * value.c: Include "cli/cli-decode.h".
1509 (internal_function): New struct.
1510 (functionlist, internal_fn_type): New static variables.
1511 (lookup_only_internalvar,
1512 lookup_internalvar): Add const qualifier to name argument.
1513 (create_internalvar): Likewise. Initialize new field.
1514 (set_internal_var): Fix typo in comment. Don't allow assignment
1515 to canonical variable.
1516 (value_create_internal_function, value_internal_function_name,
1517 call_internal_function, function_command, function_destroyer,
1518 add_internal_function): New functions.
1519 (_initialize_values): Create `function' placeholder command.
1520 Initialize internal_fn_type.
1521 * value.h (lookup_only_internalvar, create_internalvar,
1522 lookup_internalvar): Add const qualifier to name argument.
1523 (internal_function_fn, add_internal_function, call_internal_function,
1524 value_internal_function_name): Add prototypes.
1525 (struct internalvar) <canonical>: New field.
1527 2009-03-20 Tom Tromey <tromey@redhat.com>
1529 * c-lang.c (evaluate_subexp_c): Call check_typedef.
1531 2009-03-20 Tom Tromey <tromey@redhat.com>
1532 Julian Brown <julian@codesourcery.com>
1534 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
1535 PR i18n/9401, PR exp/9613:
1537 * value.h (value_typed_string): Declare.
1538 (val_print_string): Update.
1539 * valprint.h (print_char_chars): Update.
1540 * valprint.c (print_char_chars): Add type argument. Update.
1541 (val_print_string): Likewise.
1542 * valops.c (value_typed_string): New function.
1543 * utils.c (host_char_to_target): New function.
1544 (parse_escape): Use host_char_to_target, host_hex_value. Update.
1546 (no_control_char_error): Remove.
1547 * typeprint.c (print_type_scalar): Update.
1548 * scm-valprint.c (scm_scmval_print): Update.
1549 * scm-lang.h (scm_printchar, scm_printstr): Update.
1550 * scm-lang.c (scm_printchar): Add type argument.
1551 (scm_printstr): Likewise.
1552 * printcmd.c (print_formatted): Update.
1553 (print_scalar_formatted): Update.
1554 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
1555 Handle '%lc' and '%ls'.
1556 * parser-defs.h (struct typed_stoken): New type.
1557 (struct stoken_vector): Likewise.
1558 (write_exp_string_vector): Declare.
1559 * parse.c (write_exp_string_vector): New function.
1560 * p-valprint.c (pascal_val_print): Update.
1561 * p-lang.h (is_pascal_string_type, pascal_printchar,
1562 pascal_printstr): Update.
1563 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
1564 Add 'char_type' argument.
1565 (pascal_emit_char): Add type argument.
1566 (pascal_printchar): Likewise.
1567 (pascal_printstr): Likewise.
1568 * objc-lang.c (objc_emit_char): Add type argument.
1569 (objc_printchar): Likewise.
1570 (objc_printstr): Likewise.
1571 * macroexp.c (get_character_constant): Handle unicode characters.
1573 (get_string_literal): Handle unicode strings. Use
1575 * m2-valprint.c (print_unpacked_pointer): Update.
1576 (m2_print_array_contents): Update.
1577 (m2_val_print): Update.
1578 * m2-lang.c (m2_emit_char): Add type argument.
1579 (m2_printchar): Likewise.
1580 (m2_printstr): Likewise.
1581 * language.h (struct language_defn) <la_printchar>: Add type
1583 <la_printstr, la_emitchar>: Likewise.
1584 (LA_PRINT_CHAR): Likewise.
1585 (LA_PRINT_STRING): Likewise.
1586 (LA_EMIT_CHAR): Likewise.
1587 * language.c (unk_lang_emit_char): Add type argument.
1588 (unk_lang_printchar): Likewise.
1589 (unk_lang_printstr): Likewise.
1590 * jv-valprint.c (java_val_print): Update.
1591 * jv-lang.c (java_emit_char): Add type argument.
1592 * f-valprint.c (f_val_print): Update.
1593 * f-lang.c (f_emit_char): Add type argument.
1594 (f_printchar): Likewise.
1595 (f_printstr): Likewise.
1596 * expprint.c (print_subexp_standard): Update.
1597 * charset.h (target_wide_charset): Declare.
1598 (c_target_char_has_backslash_escape, c_parse_backslash,
1599 host_char_print_literally, host_char_to_target,
1600 target_char_to_host, target_char_to_control_char): Remove.
1601 (enum transliterations): New type.
1602 (convert_between_encodings): Declare.
1603 (HOST_ESCAPE_CHAR): New define.
1604 (host_letter_to_control_character, host_hex_value): Declare.
1605 (enum wchar_iterate_result): New enum.
1606 (struct wchar_iterator): Declare.
1607 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1608 wchar_push_back): Declare.
1609 * charset-list.h: New file.
1610 * c-valprint.c (textual_name): New function.
1611 (textual_element_type): Handle wide character types.
1612 (c_val_print): Pass original type to textual_element_type. Handle
1613 wide character types.
1614 (c_value_print): Use textual_element_type. Pass original type of
1616 * c-lang.h (enum c_string_type): New type.
1617 (c_printchar, c_printstr): Update.
1618 * c-lang.c (classify_type): New function.
1619 (print_wchar): Likewise.
1620 (c_emit_char): Add type argument. Handle wide characters.
1621 (c_printchar): Likewise.
1622 (c_printstr): Add type argument. Handle wide and multibyte
1624 (convert_ucn): New function.
1625 (emit_numeric_character): Likewise.
1626 (convert_octal): Likewise.
1627 (convert_hex): Likewise.
1628 (ADVANCE): New macro.
1629 (convert_escape): New function.
1630 (parse_one_string): Likewise.
1631 (evaluate_subexp_c): Likewise.
1632 (exp_descriptor_c): New global.
1633 (c_language_defn): Use exp_descriptor_c.
1634 (cplus_language_defn): Likewise.
1635 (asm_language_defn): Likewise.
1636 (minimal_language_defn): Likewise.
1637 (charset_for_string_type): New function.
1638 * c-exp.y (%union): Add 'svec' and 'tsval'.
1640 (exp): Add CHAR production.
1641 (string_exp): Rewrite.
1642 (exp) <string_exp>: Rewrite.
1643 (tempbuf): Now global.
1644 (tempbuf_init): New global.
1645 (parse_string_or_char): New function.
1646 (yylex) <tempbuf>: Now global.
1647 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
1649 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
1650 (c_parse_escape): New function.
1651 * auxv.c (fprint_target_auxv): Update.
1652 * ada-valprint.c (ada_emit_char): Add type argument.
1653 (ada_printchar): Likewise.
1654 (ada_print_scalar): Update.
1655 (printstr): Add type argument. Update calls to ada_emit_char.
1656 (ada_printstr): Add type argument.
1657 (ada_val_print_array): Update.
1658 (ada_val_print_1): Likewise.
1659 * ada-lang.c (emit_char): Add type argument.
1660 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
1662 * gdb_locale.h: Include langinfo.h.
1663 * charset.c (_initialize_charset): Set default host charset from
1664 the locale. Don't register charsets. Add target-wide-charset
1665 commands. Call find_charset_names.
1666 (struct charset, struct translation): Remove.
1667 (GDB_DEFAULT_HOST_CHARSET): Remove.
1668 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
1669 (target_wide_charset_name): New global.
1670 (show_host_charset_name): Handle "auto".
1671 (show_target_wide_charset_name): New function.
1672 (host_charset_enum, target_charset_enum): Remove.
1673 (charset_enum): New global.
1674 (all_charsets, register_charset, lookup_charset, all_translations,
1675 register_translation, lookup_translation): Remove.
1676 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
1677 (iso_8859_print_literally, iso_8859_to_control,
1678 iso_8859_family_charset): Remove.
1679 (ebcdic_print_literally, ebcdic_to_control,
1680 ebcdic_family_charset): Remove.
1681 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
1682 register_iconv_charsets): Remove.
1683 (target_wide_charset_be_name, target_wide_charset_le_name): New
1685 (identity_either_char_to_other): Remove.
1686 (set_be_le_names, validate): New functions.
1687 (backslashable, backslashed, represented): Remove.
1688 (default_c_target_char_has_backslash_escape): Remove.
1689 (default_c_parse_backslash, iconv_convert): Remove.
1690 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
1691 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
1692 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
1693 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
1694 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
1695 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
1696 (table_convert_char, table_translation, simple_table_translation):
1698 (current_host_charset, current_target_charset,
1699 c_target_char_has_backslash_escape_func,
1700 c_target_char_has_backslash_escape_baton): Remove.
1701 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
1702 (host_char_to_target_func, host_char_to_target_baton): Remove.
1703 (target_char_to_host_func, target_char_to_host_baton): Remove.
1704 (cached_iconv_host_to_target, cached_iconv_target_to_host):
1706 (lookup_charset_or_error, check_valid_host_charset): Remove.
1707 (set_host_and_target_charsets): Remove.
1708 (set_host_charset, set_target_charset): Remove.
1709 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
1710 (set_target_wide_charset_sfunc): New function.
1711 (show_charset): Print target wide character set.
1712 (host_charset, target_charset): Rewrite.
1713 (target_wide_charset): New function.
1714 (c_target_char_has_backslash_escape): Remove.
1715 (c_parse_backslash): Remove.
1716 (host_letter_to_control_character): New function.
1717 (host_char_print_literally): Remove.
1718 (host_hex_value): New function.
1719 (target_char_to_control_char): Remove.
1720 (cleanup_iconv): New function.
1721 (convert_between_encodings): New function.
1722 (target_char_to_host): Remove.
1723 (struct wchar_iterator): Define.
1724 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1725 wchar_push_back): New functions.
1726 (do_cleanup_iterator): New function.
1727 (char_ptr): New typedef.
1728 (charsets): New global.
1729 (add_one, find_charset_names): New functions.
1730 (default_charset_names): New global.
1731 (auto_host_charset_name): Likewise.
1732 * aclocal.m4, config.in, configure: Rebuild.
1733 * configure.ac: Call AM_LANGINFO_CODESET.
1734 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
1735 (AM_ICONV): Invoke earlier.
1736 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
1737 LIBICONV_LIBDIR. Check for libiconv in build tree.
1738 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
1739 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
1740 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
1741 * gdb_obstack.h (obstack_grow_wstr): New define.
1742 * gdb_wchar.h: New file.
1743 * defs.h: Include it.
1745 2009-03-20 Tom Tromey <tromey@redhat.com>
1746 Jan Kratochvil <jan.kratochvil@redhat.com>
1748 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
1749 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
1751 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
1753 * ada-typeprint.c (print_array_type): Do the NULL check
1756 2009-03-19 Tom Tromey <tromey@redhat.com>
1758 * utils.c (do_obstack_free): New function.
1759 (make_cleanup_obstack_free): Likewise.
1760 * defs.h (make_cleanup_obstack_free): Declare.
1762 2009-03-18 Doug Evans <dje@google.com>
1764 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
1765 int, not a long long.
1766 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
1768 * expprint.c (dump_raw_expression): Print note if non-NULL.
1770 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
1773 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
1775 * Makefile.in: Update license to GPLv3.
1776 * ada-exp.y: Update license to GPLv3.
1777 * ada-lex.l: Update license to GPLv3.
1778 * c-exp.y: Update license to GPLv3.
1779 * cp-name-parser.y: Update license to GPLv3.
1780 * darwin-nat-info.c: Update license to GPLv3.
1781 * f-exp.y: Update license to GPLv3.
1782 * gdb_thread_db.h: Update license to GPLv3.
1783 * hppanbsd-nat.c: Update license to GPLv3.
1784 * hppanbsd-tdep.c: Update license to GPLv3.
1785 * hppaobsd-tdep.c: Update license to GPLv3.
1786 * jv-exp.y: Update license to GPLv3.
1787 * m2-exp.y: Update license to GPLv3.
1788 * objc-exp.y: Update license to GPLv3.
1789 * p-exp.y: Update license to GPLv3.
1790 * reply_mig_hack.awk: Update license to GPLv3.
1791 * reverse.c: Update license to GPLv3.
1792 * xtensa-xtregs.c: Update license to GPLv3.
1794 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1796 * remote.c (remote_close): Don't call generic_mourn_inferior.
1797 (remote_mourn_1): Call generic_mourn_inferior after closing the
1800 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1802 * remote.c (remote_start_remote): Add missing call to
1803 init_wait_for_inferior in non-stop mode.
1805 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1807 * breakpoint.c (bpstat_should_step): Only consider software
1808 watchpoints that have a location.
1810 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1812 Add a target_ops parameter to the to_kill method in struct target_ops.
1814 * target.h (struct target_ops): Add a "target_ops *" parameter to
1816 (target_kill): Remove macro. Add declaration.
1817 * target.c (debug_to_kill): Delete, no longer necessary.
1818 (target_kill): New function.
1819 (update_current_target): Stop inheriting the to_kill method.
1820 Do not de_fault it to no_process either.
1821 (setup_target_debug): Do not set current_target.to_kill.
1822 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
1823 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
1824 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
1827 2009-03-17 Doug Evans <dje@google.com>
1829 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
1830 glibc 2.3.2 and earlier.
1832 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1834 * frame.c (get_prev_frame_1): Do not perform the inner_frame
1835 sanity check if this_frame is not NORMAL.
1836 (frame_id_inner): Update the description of this function.
1838 2009-03-17 Hui Zhu <teawater@gmail.com>
1840 * stack.c: Change the introduce of "disassemble-next-line".
1842 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1844 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
1847 2009-03-17 Hui Zhu <teawater@gmail.com>
1849 * stack.c: Include valprint.h.
1850 (disassemble_next_line): New enum.
1851 (show_disassemble_next_line): New function. Show the current
1852 value of disassemble-next-line.
1853 (gdb_disassembly_stub_args): New struct for argument passing
1854 between function do_gdb_disassembly and function
1855 gdb_disassembly_stub.
1856 (gdb_disassembly_stub): New function. Helper for
1858 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
1859 the exception from the gdb_disassembly because it will be
1860 broken by filter sometime.
1861 (print_frame_info): If disassemble-next-line is set to auto
1862 or on and doesn't have the line debug messages for $pc,
1863 output the next instruction.
1864 If disassemble-next-line is set to on and there is line debug
1865 messages, output assembly codes for next line.
1866 (_initialize_stack): Make the "set disassemble-next-line"
1867 command an auto-boolean command. Change its class to
1868 class_stack. Place it in the top level set list. Extend help
1869 to describe the auto mode.
1871 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1873 * infrun.c (normal_stop): Don't overwrite old_chain.
1875 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1877 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
1878 which is undefined, by call to regcache_invalidate, which should
1879 do what the original author wanted to do.
1881 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1883 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
1884 (mips_create_inferior): Likewise.
1886 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1888 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
1890 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1892 * darwin-nat.c (darwin_resume): Fix a compiler warning when
1893 building on x86_64-darwin.
1895 2009-03-16 Tristan Gingold <gingold@adacore.com>
1897 * configure.tgt: Add handling for x86_64-darwin.
1899 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1901 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
1903 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1905 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
1906 Use the ops parameter to get to the target beneath, rather than
1907 using the current_target global. Using the current_target global
1908 was an unintended accident.
1910 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1912 Fix an error happening while loading symbols from a core file
1915 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
1916 to detect whether we're debugging a core file or not.
1918 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1920 Modernize the aix-thread later by getting rid of the base_target
1921 global. This brings back to life the AIX port which was otherwise
1922 crashing all the time.
1924 * aix-thread.c (base_target): Delete.
1925 (pd_enable): Do not set base_target.
1926 (aix_thread_attach): Use find_target_beneath instead of base_target.
1927 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
1928 (aix_thread_fetch_registers, aix_thread_store_registers),
1929 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
1930 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
1931 (aix_thread_kill): Delete. Does not seem necessary.
1932 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
1934 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1936 * stack.c (return_command <retval_exp>): New variables retval_expr
1937 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
1938 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
1939 if RETURN_TYPE is NULL.
1941 2009-03-14 Pedro Alves <pedro@codesourcery.com>
1943 * remote.c (PACKET_qAttached): New.
1944 (remote_query_attached): New.
1945 (remote_add_inferior): Add new `attached' argument. Handle it.
1946 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
1947 -1 to remote_add_inferior in new parameter.
1948 (extended_remote_attach_1): Adjust to pass 1 to
1949 remote_add_inferior in the new parameter.
1950 (extended_remote_create_inferior_1): Adjust to pass 0 to
1951 remote_add_inferior in the new parameter.
1952 (_initialize_remote): Add "set/show remote query-attached-packet"
1955 2009-03-13 Tom Tromey <tromey@redhat.com>
1957 * symtab.c (lookup_symbol_in_language): Use a cleanup.
1959 2009-03-13 Doug Evans <dje@google.com>
1961 * exceptions.h: Clean up some comments on catch_exceptions usage.
1962 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
1965 2009-02-17 Joel Brobecker <brobecker@adacore.com>
1967 The following patch helps getting rid of a warning inside solib-som.c.
1969 * source.c (source_full_path_of): Constify parameter filename.
1970 * defs.h (source_full_path_of): Update declaration accordingly.
1972 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1974 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
1975 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
1976 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
1978 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1980 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
1981 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
1983 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1985 * ada-tasks.c (ada_task_is_alive): Move up and make static.
1986 * ada-lang.h (ada_task_is_alive): Remove declaration.
1988 2009-03-12 Jerome Guitton <guitton@adacore.com>
1990 * ada-lang.c (ada_delta): Change the type of numerators and
1991 denominators to DOUBLEST, as they may not fit into a long.
1992 (scaling_factor): Ditto.
1994 2009-03-12 Jerome Guitton <guitton@adacore.com>
1996 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
1998 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2000 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
2001 types, if we are unable to determine the actual symbol type
2002 from its tag, then use the static approximation instead.
2004 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2006 Fix crash printing packed record with packed array.
2008 * ada-lang.c (ada_modulus_from_name): New function.
2009 (ada_modulus): In the case where the type length is bigger than
2010 the size of the type used to hold the bounds, try determining
2011 the modulus from the type name.
2012 (ada_value_primitive_packed_val): Fix bug in the computation of
2013 ntarg causing an out-of-buffer invalid access.
2015 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2017 Fix segfault when printing short_integer'last.
2019 * ada-lang.c (ada_find_any_type): Search in the primitive types
2020 if a symbol could not be found.
2022 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2024 * ada-tasks.c (task_states,long_task_states): Add new states
2025 Activating and Acceptor_Delay_Sleep. Update the description
2026 of state Acceptor_Sleep.
2028 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
2030 Fix a build failure on Darwin following some changes in
2031 the profile of some target_ops methods.
2033 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
2035 (darwin_stop_inferior, darwin_detach): Likewise.
2037 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2039 Include token in ^running notification for CLI commands.
2041 * mi/mi-main.c (mi_execute_command): Set current_token here.
2042 (mi_cmd_execute): Do not set current_token here.
2044 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2048 * mi/mi-main.c (mi_print_timing_maybe): New.
2049 (captured_mi_execute_command): Simplify. Output timings to
2051 (mi_execute_async_cli_command): Do not print timings.
2052 * mi/mi-main.h (mi_print_timing_maybe): Declare.
2053 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
2055 2009-03-12 Jerome Guitton <guitton@adacore.com>
2057 * xcoffread.c (process_linenos): Check if the line in the
2058 include table refers to the main source file and, if so,
2059 add them to the main subfile.
2061 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2063 Fix a build failure on AIX introduced after a change in the profile
2064 of some of the "methods" in the target_ops structure.
2065 * aix-thread.c: Add missing target_ops parameter throughout.
2067 Implement Ada task switching on AIX.
2068 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
2069 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
2071 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
2073 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
2074 value_mark and value_free_to_mark.
2075 * objfiles.c (free_objfile): Call objfile_free_data before
2078 2009-03-10 Hui Zhu <teawater@gmail.com>
2080 * disasm.c (gdb_disassembly): Remove unused argument
2082 * disasm.h (gdb_disassembly): Ditto.
2083 * cli/cli-cmds.c (print_disassembly): Ditto.
2084 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2086 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
2088 * solib.c (solib_contains_address_p): New function.
2089 (solib_name_from_address): Use it.
2090 * printcmd.c (display_uses_solib_p): Use it.
2091 * solib.h (solib_contains_address_p): Declare it.
2093 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2095 * varobj.c (free_variable): Call value_free.
2097 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2100 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
2101 Move the variable `macinfo_type' out of the loop. Create a new
2102 processing pass before the current one to pre-create `current_file'.
2103 New complaint on misplaced zero/non-zero definitions/includes.
2104 Skip first DW_MACINFO_start_file with `at_commandline' set.
2106 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
2108 * solib.c (reload_shared_libraries): Give
2109 inferior a chance to reset solib breakpoint.
2112 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
2114 * windows-nat.c (dr): Redefine to use largest possible integer which
2116 (cygwin_set_dr): Avoid coercion.
2118 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
2120 * windows-nat.c (windows_create_inferior): Implement --tty handling on
2123 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
2125 Rename solib_address to solib_name_from_address.
2126 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
2127 (disable_breakpoints_in_unloaded_shlib): Update.
2128 * printcmd.c (display_uses_solib_p): Likewise.
2129 * stack.c (print_frame): Likewise.
2133 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
2135 * printcmd.c (do_one_display): Reparse exp_string.
2136 (display_uses_solib_p): New function.
2137 (clear_dangling_display_expressions): New function.
2138 (_initialize_printcmd): Add observer.
2139 * solib.c (no_shared_libraries): Swap order of calls to
2140 clear_solib and objfile_purge_solibs.
2142 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2144 Implement the target-specific part of Ada tasking support
2147 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
2148 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
2150 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2152 Get rid of the global "base_target" and use "find_target_beneath"
2153 to find the underlying target.
2154 * dec-thread.c (base_target): Delete.
2155 (enable_dec_thread): Remove assignement to base_target.
2156 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
2157 (dec_thread_fetch_registers, dec_thread_store_registers)
2158 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
2159 Update the function profile if necessary.
2160 Use find_target_beneath to call the same method but from
2161 the underlying target, removing the need for "base_target".
2163 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
2164 Fix a copy/paste error in a few debug traces...
2166 * solib-osf.c (init_so): Use a simpler method for computing
2167 the size of lm_info structure. This also gets rid of warning
2168 emitted by the compiler.
2170 2009-03-05 Pedro Alves <pedro@codesourcery.com>
2172 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
2173 duplicates of permanent breakpoints.
2175 2009-03-04 Pedro Alves <pedro@codesourcery.com>
2177 * inferior.h (notice_new_inferior): Declare.
2178 * infcmd.c (notice_new_inferior): New.
2179 * remote.c (remote_add_inferior, remote_add_thread): New.
2180 (notice_new_inferiors): Rename to...
2181 (remote_notice_new_inferior): ... this. Add RUNNING argument.
2182 Use remote_add_thread instead of add_thread, passing it the
2183 RUNNING argument. Add an inferior with remote_add_inferior. If
2184 we just learned about an inferior, call notice_new_inferior.
2185 (record_currthread): Adjust.
2186 (remote_threads_info): Adjust to use remote_notice_new_inferior.
2187 (remote_start_remote, extended_remote_attach_1): Use
2188 remote_add_inferior.
2189 (process_stop_reply): Adjust. Call remote_notice_new_inferior
2190 after handling expedited registers and watchpoint state.
2191 (extended_remote_create_inferior_1): Use remote_add_inferior.
2193 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
2195 * infcmd.c (registers_info): Remove register number case.
2197 2009-03-03 Pedro Alves <pedro@codesourcery.com>
2199 * top.c (quit_target): Check for target_has_execution before
2200 killing or detaching from inferiors.
2202 2009-03-02 Joel Brobecker <brobecker@adacore.com>
2204 Remove some unused routines.
2206 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
2208 * ada-lang.c (ada_task_list_iterator_ftype)
2209 (iterate_over_live_ada_tasks): Delete.
2210 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
2213 2009-03-01 Doug Evans <dje@google.com>
2215 * symtab.c: Remove trailing whitespace throughout the file.
2216 (expand_line_sal): Fix some typos and whitespace.
2218 * Makefile.in (clean): rm -f $(DEPDIR)/*.
2220 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
2221 (init.c): signals/ -> common/.
2222 (signals.o): Update.
2223 * target.h (target_signal_to_string,target_signal_to_string)
2224 (target_signal_from_name,target_signal_to_host_p)
2225 (target_signal_from_host,target_signal_to_host): Move to ...
2226 * common/gdb_signals.h: ... here. New file.
2227 * common/signals.c: Moved here from signals/signals.c.
2228 #include gdb_signals.h, remove #include of target.h in gdb case.
2229 (target_signal_from_command,default_target_signal_to_host)
2230 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
2232 Include thread ID in target_wait debugging output.
2233 * infrun.c (print_target_wait_results): New function.
2234 (wait_for_inferior,fetch_inferior_event): Call it.
2236 2009-02-27 Pedro Alves <pedro@codesourcery.com>
2238 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
2239 with a ptid_t field.
2240 * linux-thread-db.c (thread_get_info_callback): Build the ptid
2241 using the pid stored in proc_handle.ptid.
2242 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
2243 (check_for_thread_db, thread_db_detach, check_event)
2244 (thread_db_mourn_inferior, find_new_threads_callback)
2245 (thread_db_find_new_threads_1): Adjust.
2246 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
2247 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
2249 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
2251 * valprint.c (read_string): Rework clean-up logic. Use
2252 free_current_contents to clean-up buffer.
2254 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
2256 * MAINTAINERS: Update e-mail address.
2258 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
2260 * python/python-utils.c (python_string_to_unicode): Always return
2262 (python_string_to_target_string): Decrement transient python
2264 (python_string_to_host_string): Likewise.
2266 2007-02-26 Pedro Alves <pedro@codesourcery.com>
2268 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
2269 call to super_fetch_registers.
2270 (mips64_linux_store_registers): Pass `ops' to call to
2271 super_store_registers.
2273 2009-02-25 Doug Evans <dje@google.com>
2275 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
2278 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
2279 disabled_shlib_breaks, unused.
2281 * printcmd.c (build_address_symbolic): Fix comment.
2283 2009-02-25 Hui Zhu <teawater@gmail.com>
2285 * cli/cli-script.c (define_command): Add _() to query.
2286 * gnu-nat.c (inf_validate_task_sc): Ditto.
2287 * infcmd.c (kill_if_already_running): Ditto.
2288 (jump_command): Ditto.
2289 (attach_command): Ditto.
2290 * inflow.c (kill_command): Ditto.
2291 * infrun.c (handle_command): Ditto.
2292 * maint.c (maintenance_dump_me): Ditto.
2293 * memattr.c (mem_delete_command): Ditto.
2294 * monitor.c (monitor_interrupt_query): Ditto.
2295 * nto-procfs.c (interrupt_query): Ditto.
2296 * printcmd.c (undisplay_command): Ditto.
2297 * remote-mips.c (mips_kill): Ditto.
2298 * remote.c (interrupt_query): Ditto.
2299 * solib-irix.c (irix_open_symbol_file_object): Ditto.
2300 * solib-osf.c (osf_open_symbol_file_object): Ditto.
2301 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
2302 * solib-som.c (som_open_symbol_file_object): Ditto.
2303 * solib-svr4.c (open_symbol_file_object): Ditto.
2304 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
2305 * target.c (kill_or_be_killed): Ditto.
2306 * tracepoint.c (delete_trace_command): Ditto.
2307 * top.c (quit_confirm): Add _() to s that will be used
2310 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
2312 Fix windows-nat.c compilation failure.
2314 * windows-nat.c (windows_thread_alive): Fix forward declaration.
2315 (get_windows_debug_event): Add ops parameter to call to windows_resume.
2317 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2319 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
2321 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
2323 * symtab.c (find_line_symtab): Initialize exact to avoid
2326 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2328 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
2329 `ops' to recursive call.
2331 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2333 * corelow.c (get_core_registers): Adjust.
2334 (core_file_thread_alive): Rename to...
2335 (core_thread_alive): ... this.
2336 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
2337 (init_core_ops): Adjust.
2338 (coreops_suppress_target): Delete.
2339 (_initialize_corelow): Unconditionally add core_ops.
2340 * procfs.c: Include "inf-child.h".
2341 (procfs_ops): Delete.
2342 (init_procfs_ops): Delete. Reimplement as...
2343 (procfs_target): ... this, inheriting from inf-child.
2344 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
2345 (procfs_prepare_to_store): Delete.
2346 (procfs_store_registers, procfs_resume): Adjust.
2347 (procfs_open): Delete.
2348 (procfs_suppress_run): Delete.
2349 (procfs_can_run): Delete.
2350 (procfs_mourn_inferior): Adjust.
2351 (procfs_init_inferior): Add target_ops parameter. Adjust.
2352 (procfs_create_inferior): Don't pass procfs_init_inferior to
2353 fork_inferior. Instead call it after fork_inferior returns.
2354 (procfs_find_new_threads): Adjust.
2355 (_initialize_procfs): Adjust to use procfs_target instead of
2357 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
2358 (lwp_to_thread): Use target_thread_alive.
2359 (sol_thread_open): Delete.
2360 (sol_thread_attach): Delete.
2361 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
2362 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
2363 to use find_target_beneath.
2364 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
2365 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
2366 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
2367 (check_for_thread_db): New.
2368 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
2369 (sol_thread_new_objfile): Call check_for_thread_db.
2370 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
2371 (sol_thread_can_run): Delete.
2372 (sol_thread_alive): Adjust to use find_target_beneath.
2373 (sol_thread_stop): Delete.
2374 (rw_common): Use target_write_memory or target_read_memory.
2375 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
2376 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
2377 (solaris_pid_to_str): Remove check for libthread_db initialization
2379 (sol_find_new_threads): Remove check for libthread_db
2380 initialization failing, or for an invalid inferior_ptid. Adjust
2381 to use find_target_beneath.
2382 (sol_core_open, sol_core_close, sol_core_detach,
2383 sol_core_files_info, sol_find_memory_regions,
2384 sol_make_note_section, ignore): Delete.
2385 (init_sol_thread_ops): Make it a thread_stratum target. Remove
2386 unneeded callback settings.
2387 (init_sol_core_ops): Delete.
2388 (_initialize_sol_thread): No longer call init_sol_core_ops, set
2389 procfs_suppress_run, or hack with core_ops.
2391 * target.h (struct target_ops): Add a target_ops * parameter to
2392 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
2393 and to_find_new_threads.
2394 (target_fetch_registers, target_store_registers)
2395 (target_thread_alive, target_find_new_threads): Redeclare as
2398 * target.c (update_current_target): Do not inherit or de_fault
2399 to_resume, to_fetch_registers, to_store_registers,
2400 to_thread_alive, to_find_new_threads.
2401 (target_resume): Adjust.
2402 (target_thread_alive, target_find_new_threads): New.
2403 (debug_to_resume, debug_to_fetch_registers): Delete.
2404 (target_fetch_registers): New.
2405 (debug_to_store_registers): Delete.
2406 (target_store_registers): New.
2407 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
2408 (setup_target_debug): Adjust.
2410 * gdbcore.h (core_ops): Delete declaration.
2412 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
2413 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
2414 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
2415 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
2416 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
2417 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
2418 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
2419 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
2420 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
2421 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
2422 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
2423 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
2424 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
2425 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
2427 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
2428 * gdbarch.h, gdbarch.c: Regenerate.
2430 * sol2-tdep.c: Include "inferior.h".
2431 (sol2_core_pid_to_str): New.
2432 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
2434 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2435 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2436 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2437 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2439 2009-02-22 Doug Evans <dje@google.com>
2441 * exec.c (exec_file_attach): Fix comment.
2443 2009-02-22 Pedro Alves <pedro@codesourcery.com>
2445 Silence a few -Wmissing-prototypes warnings.
2448 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
2450 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
2451 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
2452 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
2453 (_initialize_amd64nbsd_tdep): ... this.
2454 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
2455 (_initialize_arm_linux_tdep): Declare.
2456 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
2457 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
2458 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
2459 * avr-tdep.c (avr_return_value): Make it static.
2460 (avr_frame_unwind_cache): Ditto.
2461 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
2462 (bsd_uthread_solib_loaded): Ditto.
2463 (bsd_uthread_solib_unloaded): Ditto.
2464 (bsd_uthread_target): Ditto.
2465 (_initialize_bsd_uthread): Declare.
2466 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
2467 (cris_frame_unwind_cache): Ditto.
2468 * frv-tdep.c (frv_return_value): Ditto.
2469 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
2470 (h8300h_use_struct_convention): Ditto.
2471 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
2473 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
2475 * hppabsd-tdep.c: Include hppabsd-tdep.h.
2476 (hppabsd_find_global_pointer): Make it static.
2477 * hppabsd-tdep.h: New.
2478 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
2479 (hppabsd_init_abi): Remove declaration.
2480 (_initialize_hppabsd_tdep): Remove declaration.
2481 (_initialize_hppanbsd_tdep): Declare.
2482 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
2483 (hppabsd_init_abi): Delete declaration.
2484 (hppaobsd_init_abi): Make it static.
2485 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
2486 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
2487 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
2488 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
2489 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
2490 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
2491 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
2492 (_initialize_m32c_tdep): Declare.
2493 * m32r-rom.c (_initialize_m32r_rom): Declare.
2494 * m32r-tdep.c (m32r_skip_prologue): Make it static.
2495 (m32r_return_value): Ditto.
2496 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
2497 (m68hc11_return_value): Ditto.
2498 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
2499 * m88k-tdep.c (m88k_frame_cache): Make it static.
2500 * mep-tdep.c (mep_gdb_print_insn): Ditto.
2501 (mep_return_value): Ditto.
2502 (_initialize_mep_tdep): Declare.
2503 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
2504 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
2505 (mips_linux_syscall_next_pc): Ditto.
2506 (_initialize_mips_linux_tdep): Declare.
2507 * mips-tdep.c (mips_single_step_through_delay): Make it static.
2508 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
2509 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
2510 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
2511 * mt-tdep.c (_initialize_mt_tdep): Declare.
2512 * nbsd-tdep.c: Include nbsd-tdep.h.
2513 * nto-tdep.c (find_load_phdr): Make it static.
2514 (_initialize_nto_tdep): Declare.
2515 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
2517 (_initialize_ppc_linux_tdep): Declare.
2518 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
2519 (m32r_insert_watchpoint, m32r_remove_watchpoint)
2520 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
2522 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
2523 * rs6000-nat.c: Include xcoffread.h.
2524 (find_toc_address): Don't extern declare get_toc_offset. Adjust
2525 to call xcoff_get_to_offset.
2526 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
2527 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
2528 (rs6000_skip_trampoline_code): Make static.
2529 * s390-tdep.c (s390_regset_from_core_section): Ditto.
2530 * sh-tdep.c (sh_register_reggroup_p): Ditto.
2531 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
2532 (_initialize_shnbsd_tdep): Declare.
2533 * solib-frv.c (displacement_from_map): Make static.
2534 (_initialize_frv_solib): Declare.
2535 * solib-irix.c (fetch_lm_info): Make static.
2536 (_initialize_irix_solib): Declare.
2537 * solib-som.c: Include solib-som.h.
2538 (som_solib_select): Line break.
2539 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
2540 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
2541 (_initialize_sparcnbsd_tdep): ... this.
2542 * spu-tdep.c (spu_software_single_step): Make it static.
2543 (_initialize_spu_tdep): Declare.
2544 * vax-tdep.c (vax_frame_cache): Make it static.
2545 * xcoffread.c: Include xcoffread.h.
2546 (get_toc_offset): Rename to ...
2547 (xcoff_get_toc_offset): ... this.
2548 (_initialize_xcoffread): Declare.
2550 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
2551 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
2553 (_initialize_xtensa_tdep): Declare.
2555 2008-02-21 Pedro Alves <pedro@codesorcery.com>
2557 Silence a few -Wmissing-prototypes warnings.
2560 * amd64-nat.c: Include "amd64-nat.h".
2561 * fork-child.c (_initialize_fork_child): Ditto.
2562 * gcore.c (_initialize_gcore): Ditto.
2563 * inf-ptrace.c: Include "inf-ptrace.h".
2564 (inf_ptrace_store_registers): Make it static.
2565 * linux-nat.c (linux_nat_terminal_ours): Make it static.
2566 (_initialize_linux_nat): Declare before definition.
2567 * linux-tdep.c: Include "linux-tdep.h".
2568 * linux-thread-db.c (_initialize_thread_db): Declare before
2570 * proc-service.c (_initialize_proc_service): Ditto.
2571 * remote.c (remote_send_printf): Make it static.
2572 * solib.c: Include "solib.h".
2573 * symfile-mem.c (_initialize_symfile_mem): Declare before
2575 * ada-lang.c (ada_la_decode, ada_match_name)
2576 (ada_suppress_symbol_printing, ada_is_array_type)
2577 (ada_value_ptr_subscript, ada_array_length)
2578 (ada_to_static_fixed_value): Make them static.
2579 (_initialize_ada_language): Declare before definition.
2580 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
2581 (ada_task_list_changed, ada_new_objfile_observer): Make them
2583 (_initialize_tasks): Declare before definition.
2584 * addrmap.c (_initialize_addrmap): Declare before definition.
2585 * auxv.c (default_auxv_parse): Make it static.
2586 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
2588 * breakpoint.c (remove_sal): Add line break.
2589 (expand_line_sal_maybe): Make it static.
2590 * cp-name-parser.y: Include "cp-support.h".
2591 * cp-valprint.c (cp_find_class_member): Make it static.
2592 * eval.c (value_f90_subarray): Ditto.
2593 * exceptions.c (print_any_exception): Ditto.
2594 * findcmd.c (_initialize_mem_search): Declare before definition.
2595 * frame.c (frame_observer_target_changed): Make it static.
2596 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
2597 * inf-child.c: Include "inf-child.h".
2598 * inferior.h (valid_inferior_id): Rename to ...
2599 (valid_gdb_inferior_id): ... this.
2600 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
2602 * jv-lang.c (java_language_arch_info): Make it static.
2603 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
2604 * osdata.c (info_osdata_command): Make it static.
2605 * regcache.c (regcache_observer_target_changed): Make it static.
2606 * reverse.c (_initialize_reverse): Declare before definition.
2607 * stabsread.c (cleanup_undefined_types_noname)
2608 (cleanup_undefined_types_1): Make them static.
2609 * symfile.c (place_section): Make it static.
2610 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
2611 * target-descriptions.c (_initialize_target_descriptions): Declare
2613 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
2614 (find_default_is_async_p, find_default_supports_non_stop): Make
2616 (target_supports_non_stop): Add prototype.
2617 (dummy_pid_to_str): Make it static.
2618 * utils.c (_initialize_utils): Declare before definition.
2619 * ada-exp.y (_initialize_ada_exp): Declare before definition.
2620 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
2621 * target.h (struct target_ops): Add a prototype to the
2622 to_can_execute_reverse callback.
2623 * macroscope.c (_initialize_macroscope): Declare before definition.
2624 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
2625 * python/python.c (_initialize_python): Declare before definition.
2626 * tui/tui-command.c: Include "tui/tui-command.h".
2627 * tui/tui-data.c (init_content_element, init_win_info): Make them
2629 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
2630 * tui/tui-interp.c (_initialize_tui_interp): Declare before
2632 * tui/tui-layout.c: Include "tui/tui-layout.h".
2633 (_initialize_tui_layout): Declare before definition.
2634 * tui/tui-regs.c: Include "tui/tui-regs.h".
2635 (tui_display_reg_element_at_line): Make it static.
2636 (_initialize_tui_regs): Declare before definition.
2637 * tui/tui-stack.c (_initialize_tui_stack): Declare before
2639 * tui/tui-win.c: Include "tui/tui-win.h".
2640 (_initialize_tui_win): Declare before definition.
2641 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
2642 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
2643 (tui_get_cmd_list): Add a prototype.
2644 * tui/tui-windata.c: Include tui-windata.h.
2645 * tui/tui-wingeneral.c (box_win): Make it static.
2646 * cli/cli-logging.c (show_logging_command): Make it static.
2647 (_initialize_cli_logging): Declare before definition.
2648 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
2651 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
2653 Extend use of i386_use_watchpoints to all i386 native files
2654 using hardware watchpoints.
2655 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
2656 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
2657 * windows-nat.c (init_windows_ops): Ditto.
2658 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
2659 * config/i386/nm-cygwin64.h: Ditto.
2660 * config/i386/nm-fbsd.h: Ditto.
2661 * config/i386/nm-go32.h: Ditto.
2663 2009-02-19 Joel Brobecker <brobecker@adacore.com>
2665 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
2667 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
2669 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
2670 (mi_interpreter_init): Register the above.
2671 * solib.c (clear_solib): Notify solib unload.
2672 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
2673 disable breakpoints on a.out targets.
2675 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
2677 * observer.c (observer_test_first_notification_function)
2678 (observer_test_second_notification_function)
2679 (observer_test_third_notification_function): Adjust prototype.
2681 2009-02-17 Pedro Alves <pedro@codesourcery.com>
2683 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
2684 (ALL_TARGET_OBS): Add dicos-tdep.o.
2685 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
2686 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
2688 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
2690 * dicos-tdep.h, dicos-tdep.c: New.
2691 * amd64-dicos-tdep.c: New.
2692 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
2693 inferior.h. Include dicos-tdep.h.
2694 (i386_dicos_init_abi): Call dicos_init_abi.
2695 (i386_dicos_bfd_has_symbol_p): Delete.
2696 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
2698 * NEWS: Mention x86-64 DICOS target support.
2700 2009-02-16 Doug Evans <dje@google.com>
2702 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
2703 All callers updated.
2704 (amd64_get_insn_details): Handle more 3-byte opcode insns.
2705 (amd64_breakpoint_p): Delete.
2706 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
2707 don't back up pc to the start of the int3.
2708 * i386-tdep.c: #include opcode/i386.h.
2709 (i386_skip_prefixes): New function.
2710 (i386_absolute_jmp_p): Constify argument.
2711 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
2712 (i386_breakpoint_p): Delete.
2713 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
2714 When fixing up after stepping an int3, don't back up pc to the start
2717 2009-02-16 Pedro Alves <pedro@codesourcery.com>
2719 * corelow.c (core_close): Don't hardcode the core's pid.
2720 (core_open): Find core threads before calling
2721 post_create_inferior.
2722 (add_to_thread_list, get_core_register_section): Take into account
2723 systems where the regset section names encode the pid of the
2726 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
2727 * gdbarch.h, gdbarch.c: Regenerate.
2729 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2730 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2731 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2732 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2734 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
2736 Include frame information for *stopped due to CLI commands.
2738 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
2739 * infcmd.c (finish_command_continuation): Pass '1' for
2740 'print_frame' parameter to the observer.
2741 * infrun.c (normal_stop): Don't print mi-specific information
2742 here. Pass 'stop_print_frame' to the 'print_frame' parameter
2744 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
2745 If we need to print frame, and current uiout is not the MI one,
2748 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
2750 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
2751 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
2753 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2756 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
2757 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
2759 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
2761 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
2762 for DW_ATE_signed_char and DW_ATE_unsigned_char
2763 for pascal language.
2765 2009-02-11 Jim Meyering <meyering@redhat.com>
2766 Jan Kratochvil <jan.kratochvil@redhat.com>
2768 Avoid NULL dereference.
2769 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
2770 New variable func_type.
2772 2009-02-11 Pedro Alves <pedro@codesourcery.com>
2774 * gdbarch.c: Regenerate.
2776 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
2778 * p-lang.c (is_pascal_string_type): Fix comment.
2779 Determine exact size of char elements for GPC
2781 (pascal_printstr): Handle char width of 2 or 4.
2782 * p-valprint.c (pascal_val_print): Handle char
2785 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
2787 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
2788 inside the loop. Only call addrmap_set_empty if the compilation unit
2789 had DW_AT_high_pc and DW_AT_low_pc. Update call to
2790 scan_partial_symbols.
2791 (scan_partial_symbols): Take NEED_PC argument and pass it along with
2793 (add_partial_namespace): Take NEED_PC argument and pass it through.
2794 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
2797 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2799 * NEWS: Mention inspecting extra signal information, $_siginfo,
2800 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
2802 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2804 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
2807 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2809 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
2810 (compat_timer_t, compat_clock_t, struct compat_timeval)
2811 (compat_sigval_t, compat_siginfo_t): New types.
2812 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
2813 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
2814 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
2815 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
2816 (amd64_linux_siginfo_fixup): New.
2817 * linux-nat.c (linux_nat_siginfo_fixup): New.
2818 (siginfo_fixup): New.
2819 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
2820 siginfo layout expected by ptrace and the siginfo layout of the
2822 (linux_nat_set_siginfo_fixup): New.
2823 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
2825 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2827 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
2828 * infrun.c (siginfo_value_read, siginfo_value_write): New.
2829 (siginfo_value_funcs): New.
2830 (siginfo_make_value): New.
2831 (_initialize_infrun): Create the $_siginfo convenience variable.
2832 * gdbtypes.h (append_composite_type_field_aligned): Declare.
2833 * gdbtypes.c (append_composite_type_field): Rename to...
2834 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
2835 argument. Handle it.
2836 (append_composite_type_field): Rewrite on top of
2837 append_composite_type_field_aligned.
2838 * value.h (internalvar_make_value): New typedef.
2839 (struct internalvar) <make_value>: New field.
2840 (create_internalvar_type_lazy): Declare.
2841 * value.c (create_internalvar): Clear make_value.
2842 (create_internalvar_type_lazy): New.
2843 (value_of_internalvar): If make_value is set use it.
2844 (preserve_values): Skip internal variables that don't have a
2846 * gdbarch.sh (get_siginfo_type): New.
2847 * gdbarch.h, gdbarch.c: Regenerate.
2849 * linux-tdep.h, linux-tdep.c: New.
2850 * amd64-linux-tdep.c: Include "linux-tdep.h".
2851 (amd64_linux_init_abi): Register linux_get_siginfo_type and
2852 linux_get_siginfo_mapper.
2853 * i386-linux-tdep.c: Include "linux-tdep.h".
2854 (i386_linux_init_abi): Register linux_get_siginfo_type and
2855 linux_get_siginfo_mapper.
2856 * arm-linux-tdep.c: Include "linux-tdep.h".
2857 (i386_linux_init_abi): Register linux_get_siginfo_type and
2858 linux_get_siginfo_mapper.
2860 * linux-nat.c (linux_xfer_siginfo): New.
2861 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2862 * remote.c (PACKET_qXfer_siginfo_read)
2863 (PACKET_qXfer_siginfo_write): New.
2864 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
2865 "qXfer:siginfo:write" features.
2866 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2867 (_initialize_remote): Add "set/show remote read-siginfo-object"
2868 and "set/show remote write-siginfo-object" commands.
2870 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
2871 (HFILES_NO_SRCDIR): Add linux-tdep.h.
2872 (ALLDEPFILES): Add linux-tdep.c.
2874 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
2875 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
2878 2009-02-06 Jim Blandy <jimb@codesourcery.com>
2879 Daniel Jacobowitz <dan@codesourcery.com>
2880 Vladimir Prus <vladimir@codesourcery.com>
2881 Pedro Alves <pedro@codesourcery.com>
2883 * defs.h (enum lval_type): New value: lval_computed.
2884 * value.h (struct lval_funcs): New type.
2885 (allocate_computed_value, value_computed_funcs)
2886 (value_computed_closure): New declarations.
2887 * value.c (struct value): Add a structure to the location union
2888 for computed lvalues, containing 'funcs' and 'closure' members.
2889 (allocate_computed_value, value_computed_funcs)
2890 (value_computed_closure): New functions.
2891 (value_free): For computed lvalues, call the closure's
2892 'free_closure' function before freeing the value itself.
2893 (value_copy): If we're copying an lval_computed value, call the
2894 closure's 'copy_closure' function.
2895 (set_value_component_location): If the original value is a
2896 computed lvalue, then call the closure's 'copy_closure' function.
2897 (value_of_internalvar): If an internal variable's value is a
2898 computed lvalue, make retrieving its value produce an equivalent
2900 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
2901 their read function.
2902 (value_assign): Assign to computed lvalues by calling their write
2905 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2907 * linux-nat.c (linux_nat_wait): Adjust.
2908 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
2909 * linux-nat.h (thread_db_init): Delete declaration.
2910 * linux-thread-db.c (target_beneath): Delete.
2911 (thread_db_init): Delete.
2912 (thread_db_detach): Use find_target_beneath.
2913 (thread_db_wait): Adjust interface. Use find_target_beneath.
2914 (thread_db_mourn_inferior): Use find_target_beneath.
2915 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
2916 (thread_db_async_mask): Delete.
2917 (thread_db_pid_to_str): Adjust interface. Use
2918 find_target_beneath.
2919 (thread_db_get_thread_local_address): Adjust interface. Use
2920 find_target_beneath.
2921 (init_thread_db_ops): Delete references to delete functions.
2922 * target.c (update_current_target): Don't inherit or default
2923 to_wait. Don't inherit to_pid_to_str and
2924 to_get_thread_local_address.
2925 (target_translate_tls_address): Look for a pushed target that
2926 implements to_get_thread_local_address, and use it instead of
2927 checking for target_get_thread_local_address_p.
2928 (target_wait, target_pid_to_str): Reimplement as functions.
2929 (dummy_pid_to_str): New.
2930 (init_dummy_target): Register it.
2931 (debug_to_wait): Delete.
2932 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
2933 to_get_thread_local_address accept a pointer to struct target_ops.
2934 (target_wait): Delete macro, and declare as function.
2935 (target_pid_to_str): Likewise.
2936 (target_get_thread_local_address)
2937 (target_get_thread_local_address_p): Delete.
2938 (noprocess): Add NORETURN and ATTR_NORETURN tags.
2939 * inf-ptrace.c (inf_ptrace_wait): Adjust.
2940 (inf_ptrace_pid_to_str): New.
2941 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
2942 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
2943 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
2944 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
2946 * corelow.c (core_pid_to_str): Adjust.
2947 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
2948 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
2949 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
2950 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
2951 * hpux-thread.c (hpux_thread_wait): Adjust.
2952 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
2953 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
2954 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
2955 * procfs.c (procfs_pid_to_str): Adjust.
2956 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
2957 * remote-mips.c (mips_wait): Adjust.
2958 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
2959 * remote.c (remote_wait, remote_pid_to_str)
2960 (remote_get_thread_local_address): Adjust.
2961 * rs6000-nat.c (rs6000_wait): Adjust.
2962 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
2963 (sol_thread_wait, solaris_pid_to_str): Adjust.
2964 * spu-linux-nat.c (spu_child_wait): Adjust.
2965 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2967 2009-02-06 Tom Tromey <tromey@redhat.com>
2969 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
2970 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
2971 (python-cmd.o): New target.
2972 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
2973 completer prototype.
2974 (add_cmd): Initialize destroyer member of cmd_list_element. Use
2975 make_symbol_completion_list_fn as completer.
2976 (delete_cmd): Call destroyer if one is set.
2977 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
2978 completer member. Add destroyer member.
2979 (set_cmd_completer): Add self parameter to
2980 completer prototype.
2981 * command.h (set_cmd_completer): Add cmd parameter to
2982 completer prototype.
2983 * completer.c (noop_completer, filename_completer,
2984 location_completer, expression_completer, command_completer): Adapt
2985 to new completer prototype.
2986 (complete_line_internal): Pass new parameter to completer function.
2987 * completer.h (noop_completer, filename_completer,
2988 location_completer, expression_completer, command_completer): Adapt
2989 prototypes to new completer prototype.
2990 * interps.c (interpreter_completer): Adapt to new completer
2992 * python/python-cmd.c: New file.
2993 * python/python-internal.h (gdbpy_initialize_commands): Add
2995 (gdbpy_doc_cst): Add forward declaration.
2996 * python/python.c (gdbpy_doc_cst): Declare.
2997 (_initialize_python): Call gdbpy_initialize_commands. Initialize
2999 * symtab.c (make_symbol_completion_list_fn): New function.
3000 * symtab.h (make_symbol_completion_list_fn): Add prototype.
3002 2009-02-06 Pedro Alves <pedro@codesourcery.com>
3004 * target.c (target_get_osdata): Check for equal or higher than
3005 process_stratum, not dummy_stratum.
3007 2009-02-06 Pedro Alves <pedro@codesourcery.com>
3009 * remote.c (extended_remote_can_run): Delete.
3010 (init_remote_ops): Don't register it.
3011 * target.c (target_get_osdata): Don't check for target_can_run.
3012 Instead any target that has already been pushed, otherwise
3013 fallback to the default run target.
3015 2009-02-06 Pedro Alves <pedro@codesourcery.com>
3017 * target.c (target_create_inferior, target_detach)
3018 (target_mourn_inferior, target_attach, target_close): Do target
3020 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
3021 (debug_to_mourn_inferior, debug_to_close): Delete.
3022 (setup_target_debug): Adjust.
3024 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3026 * target.h (target_stopped_data_address_p): Delete declaration,
3027 and don't define as macro.
3028 * target.c (target_stopped_data_address_p): Delete.
3030 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3031 Tom Tromey <tromey@redhat.com>
3033 * python/python-utils.c (target_string_to_unicode): New function.
3034 * python/python-internal.h (target_string_to_unicode): New prototype.
3035 * python/python-value.c (valpy_string): New function.
3036 (value_object_methods): Add `string' entry.
3038 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3040 * target.h (target_tid_to_str): Delete.
3041 * thread.c (print_thread_info, thread_apply_all_command)
3042 (thread_apply_command, thread_command, do_captured_thread_select):
3043 Use target_pid_to_str instead of target_tid_to_str.
3044 * linux-fork.c (delete_fork_command): Likewise.
3046 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3048 * frame.c (has_stack_frames): Make public.
3049 (get_prev_frame): Don't allow a NULL this_frame anymore.
3050 * frame.h (has_stack_frames): Declare.
3051 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
3052 to get_prev_frame, instead start at get_current_frame.
3053 (varobj_create): Check has_stack_frames before getting any frame;
3054 eliminate one usage of deprecated_safe_get_selected_frame.
3056 2009-02-05 Tom Tromey <tromey@redhat.com>
3057 Thiago Jung Bauermann <bauerman@br.ibm.com>
3059 * python/python.c (GdbMethods): Move to bottom of file.
3060 (get_parameter, execute_gdb_command, gdbpy_write,
3061 gdbpy_flush): Remove forward declarations.
3062 (eval_python_from_control_command): Fix error checking of function
3063 PyRun_SimpleString. Fix error string.
3064 (python_command): Likewise.
3065 (execute_gdb_command): Added from_tty argument.
3067 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3069 * language.h (language_dfn): Add la_get_string member.
3070 (LA_GET_STRING): New macro.
3071 (default_get_string): New prototype.
3072 * language.c (default_get_string): New function.
3073 (unknown_language_defn, auto_language_defn, local_language_defn): Use
3074 default_get_string for la_get_string.
3075 * c-lang.c (c_get_string): New function.
3076 (c_language_defn, cplus_language_defn, asm_language_defn): Use
3077 c_get_string for la_get_string.
3078 (minimal_language_defn): Likewise
3079 * ada-lang.c (ada_language_defn): Likewise.
3080 * f-lang.c (f_language_defn): Use default_get_string for
3082 * jv-lang.c (java_language_defn): Likewise.
3083 * m2-lang.c (m2_language_defn): Likewise.
3084 * objc-lang.c (objc_language_defn): Likewise.
3085 * p-lang.c (p_language_defn): Likewise.
3086 * scm-lang.c (scm_language_defn): Likewise.
3087 * typeprint.c (type_to_string): New function.
3088 * value.h (type_to_string): New prototype.
3089 * valprint.c (val_print_string): Factor out code for reading string
3090 from the inferior into its own function. Put 2 spaces after period
3092 (read_string): New function.
3093 * valprint.h (read_string): New prototype.
3095 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
3096 Tom Tromey <tromey@redhat.com>
3098 PR breakpoints/8079:
3099 * breakpoint.c (print_one_breakpoint): Use exp_string field
3100 to display expression of watchpoints.
3101 (mention): Likewise.
3102 (watch_command_1): Remove trailing whitespace from expression.
3103 * printcmd.c (struct display) <exp_string>: New field.
3104 (display_command): Set exp_string.
3105 (free_display): Free exp_string.
3106 (clear_displays): Use free_display.
3107 (do_one_display): Print exp_string.
3108 (display_info): Likewise.
3110 2009-02-04 Tom Tromey <tromey@redhat.com>
3111 Thiago Jung Bauermann <bauerman@br.ibm.com>
3112 Phil Muldoon <pmuldoon@redhat.com>
3114 * python/python-internal.h (gdbpy_get_value_from_history): Rename
3115 prototype to gdbpy_history.
3116 (gdbpy_is_string): Declare.
3117 (python_string_to_host_string): Declare.
3118 * python/python-utils.c (gdbpy_is_string): New function.
3119 (unicode_to_encoded_string): New function.
3120 (unicode_to_target_string): Use it.
3121 (python_string_to_host_string): New function.
3122 * python/python-value.c (valpy_address): New function.
3123 (convert_value_from_python): Use gdbpy_is_string. Change to throw
3124 Python exception instead of a GDB exception on error. Properly check
3126 (valpy_getitem): Convert field name to host string. Handle array
3127 accesses. Adapt to new behaviour of convert_value_from_python.
3128 (valpy_new): Adapt to new behaviour of convert_value_from_python.
3129 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
3130 VALPY_BITXOR, VALPY_BITOR>: New constants.
3131 (valpy_binop): Update. Adapt to new behaviour of
3132 convert_value_from_python.
3133 (valpy_invert): New function.
3134 (valpy_lsh): Likewise.
3135 (valpy_rsh): Likewise.
3136 (valpy_and): Likewise.
3137 (valpy_or): Likewise.
3138 (valpy_xor): Likewise.
3139 (valpy_richcompare): Call convert_value_from_python instead of doing
3141 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
3142 (gdbpy_get_value_from_history): Rename
3143 function to gdbpy_history.
3144 (gdbpy_initialize_values): Don't set tp_new.
3145 (value_object_type): Add valpy_new.
3146 (value_object_methods): Add `address' entry.
3147 (value_object_as_number): Update for new methods.
3148 * python/python.c (GdbMethods): Rename entry from
3149 `get_value_from_history' to `history'.
3151 2009-02-04 Jerome Guitton <guitton@adacore.com>
3153 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
3154 of type to guard against a crash.
3156 2009-02-04 Jerome Guitton <guitton@adacore.com>
3158 * value.c (value_from_contents_and_address): Always return
3159 a lval_memory value, even if address is null.
3161 2009-02-04 Tristan Gingold <gingold@adacore.com>
3163 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
3164 (amd64_darwin_sigcontext_addr): Ditto.
3165 (darwin_dwarf_signal_frame_p): Ditto.
3166 (i386_darwin_init_abi): Handle signal frames, use the const for
3168 (x86_darwin_init_abi_64): Ditto.
3170 2009-02-04 Tristan Gingold <gingold@adacore.com>
3172 * i386-tdep.c (i386_sigtramp_p): Make it public.
3173 * i386-tdep.h (i386_sigtramp_p): Declare.
3175 2009-02-04 Tristan Gingold <gingold@adacore.com>
3177 * machoread.c (macho_symfile_read): Read minsymtab also from
3179 (macho_symfile_read): Try to read dwarf2 frame info from main
3180 object file, but not from OSO files.
3181 (macho_symfile_offsets): Update section names for latest BFD
3183 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
3184 (x86_darwin_init_abi_64): Ditto.
3185 * solib-darwin.c: New file.
3186 * solib-darwin.h: New file.
3187 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
3189 2009-02-04 Tristan Gingold <gingold@adacore.com>
3191 * solist.h (struct target_so_ops): Comment fallback behavior for
3194 2009-02-03 Tom Tromey <tromey@redhat.com>
3196 * completer.c (add_struct_fields): Check type_name against NULL
3199 2009-02-03 Joel Brobecker <brobecker@adacore.com>
3201 * MAINTAINERS: Update Elena's email address.
3203 2009-02-02 Joel Brobecker <brobecker@adacore.com>
3205 * breakpoint (update_watchpoint): Minor comment adjustment.
3207 2009-02-02 Tom Tromey <tromey@redhat.com>
3210 * completer.c (count_struct_fields): Count method names.
3211 (add_struct_fields): Add matching method names.
3213 2009-02-02 Doug Evans <dje@google.com>
3215 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
3216 doing any further tcl/tk configury. Don't configure gdbtk if
3217 tcl or tk check fails.
3218 * aclocal.m4: Regenerate.
3219 * configure: Regenerate.
3221 2009-02-02 Tom Tromey <tromey@redhat.com>
3224 * valops.c (find_overload_match): Follow typedefs before taking
3225 address of object argument.
3227 2009-02-01 Doug Evans <dje@google.com>
3229 * target.h (target_waitstatus_to_string): Declare.
3230 * target.c (target_waitstatus_to_string): New function. Copied from
3231 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
3232 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
3233 TARGET_WAITKIND_NO_HISTORY.
3234 (debug_to_wait): Call it.
3235 * infrun.c (wait_for_inferior): If debug_infrun, print result of
3237 (fetch_inferior_event): Ditto.
3239 2009-01-30 Tom Tromey <tromey@redhat.com>
3241 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
3243 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3246 * thread.c (do_captured_list_thread_ids): Report the current
3249 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3251 * breakpoint.c (create_breakpoint, create_breakpoints)
3252 (break_command_really, set_breakpoint): New parameter enabled.
3253 (create_breakpoint, break_command_really): Make breakpoint
3254 disabled if so requested.
3255 * breakpoint.h (set_breakpoint): New parameter enabled.
3256 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
3258 2009-01-28 Doug Evans <dje@google.com>
3260 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
3261 (amd64_displaced_step_fixup): Declare.
3262 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
3263 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
3264 and make static global.
3265 (amd64_arch_regmap_len): New static global.
3266 (amd64_arch_reg_to_regnum): New function.
3267 (struct amd64_insn): New struct.
3268 (struct displaced_step_closure): New struct.
3269 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
3270 (rex_prefix_p,skip_prefixes)
3271 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
3272 (amd64_insn_length,amd64_get_unused_input_int_reg)
3273 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
3274 (amd64_displaced_step_copy_insn)
3275 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
3276 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
3277 (amd64_displaced_step_fixup): New functions.
3278 * amd64-linux-tdep.c: #include arch-utils.h.
3279 (amd64_linux_init_abi): Install displaced stepping support.
3281 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
3282 Jerome Guitton <guitton@adacore.com>
3284 * configure, config.in: Regenerated.
3285 * configure.ac: Add --with-system-gdbinit.
3286 * main.c (get_init_files): New.
3287 (captured_main): Use get_init_files. Load system gdbinit before
3289 (print_gdb_help): Print location of init files.
3291 2009-01-28 Pedro Alves <pedro@codesourcery.com>
3293 * corefile.c (generic_search): Delete disabled code.
3294 * gdbcore.h (generic_search): Delete declaration.
3296 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3298 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
3299 parent to the child.
3300 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
3301 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
3302 remove_breakpoints to remove breakpoints from the parent.
3304 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3306 PR backtrace/9458, PR backtrace/8864:
3307 * frame.c (create_new_frame): Update the frame's cached PC before
3308 finding its unwinder. Use frame_id_build to build the new frame's
3310 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
3311 array values from the ``args'' array values.
3313 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3315 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
3316 (create_array_type, create_set_type, init_flags_type)
3317 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
3318 with a call to XZALLOC or XCALLOC, and pairs of calls to
3319 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
3321 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3323 Add "maint set|show internal-error|internal-warning quit|corefile
3324 ask|yes|no" commands.
3327 * utils.c (internal_problem_ask, internal_problem_yes)
3328 (internal_problem_no, internal_problem_modes): New.
3329 (struct internal_problem): Remove FIXME. Make should_quit and
3330 should_dump_core types to char *.
3331 (internal_vproblem, internal_error_problem)
3332 (internal_warning_problem): Adjust.
3333 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
3335 (add_internal_problem_command): New.
3336 (_initialize_utils): New.
3338 2009-01-25 Pedro Alves <pedro@codesourcery.com>
3340 * infcmd.c (program_info): Use paddress instead of casting stop_pc
3343 2009-01-24 Pedro Alves <pedro@codesourcery.com>
3345 * infrun.c (normal_stop): Don't call
3346 deprecated_update_frame_pc_hack.
3347 * frame.c (deprecated_update_frame_pc_hack)
3348 (deprecated_update_frame_base_hack): Delete, and ...
3349 (create_new_frame): ... inline here.
3350 * frame.h (deprecated_update_frame_pc_hack)
3351 (deprecated_update_frame_base_hack): Delete declarations.
3353 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3355 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
3356 * cli/cli-setshow.c (do_setshow_command): Handle it.
3357 * command.h (enum var_types): Add var_zuinteger.
3358 (add_setshow_zuinteger_cmd): Declare.
3360 * valprint.c (_initialize_valprint): Change the set input-radix
3361 and set output-radix commands to zuinteger type.
3363 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3366 * infrun.c (normal_stop): Tag threads as stopped, and run the
3367 hook-stop before printing the stack frame.
3369 2009-01-22 Pedro Alves <pedro@codesourcery.com>
3372 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
3375 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
3377 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
3380 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
3383 * infcmd.c (signal_command): Do not specify a resume PC.
3385 2009-01-19 Doug Evans <dje@google.com>
3387 * dummy-frame.c (dummy_frame): Replace regcache member with
3389 (dummy_frame_push): Replace caller_regcache arg with caller_state.
3390 All callers updated.
3391 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
3392 (dummy_frame_pop): Rewrite. Verify requested frame is in the
3393 dummy frame stack. Restore program state.
3394 (cleanup_dummy_frames): Rewrite.
3395 (dummy_frame_sniffer): Update. Make static.
3396 * dummy-frame.h (regcache,frame_info): Delete forward decls.
3397 (inferior_thread_state): New forward decl.
3398 (dummy_frame_push): Update prototype.
3399 * frame.c (frame_pop): dummy_frame_pop now does all the work for
3401 * infcall.c (breakpoint_auto_delete_contents): Delete.
3402 (get_function_name,run_inferior_call): New fns.
3403 (call_function_by_hand): Simplify by moving some code to
3404 get_function_name, run_inferior_call. Inferior function call wrapped
3405 in TRY_CATCH so there's less need for cleanups and all exits from
3406 proceed are handled similarily. Detect program exit.
3407 Detect program stopping in a different thread.
3408 Make error messages more consistent.
3409 * inferior.h (inferior_thread_state): Declare (opaque type).
3410 (save_inferior_thread_state,restore_inferior_thread_state,
3411 make_cleanup_restore_inferior_thread_state,
3412 discard_inferior_thread_state, get_inferior_thread_state_regcache):
3414 (save_inferior_status): Update prototype.
3415 * infrun.c: (normal_stop): When stopped for the completion of an
3416 inferior function call, verify the expected stack frame kind.
3417 (inferior_thread_state): New struct.
3418 (save_inferior_thread_state,restore_inferior_thread_state,
3419 do_restore_inferior_thread_state_cleanup,
3420 make_cleanup_restore_inferior_thread_state,
3421 discard_inferior_thread_state,
3422 get_inferior_thread_state_regcache): New functions.
3423 (inferior_status): Move stop_signal, stop_pc, registers to
3424 inferior_thread_state. Remove restore_stack_info.
3425 (save_inferior_status): Remove arg restore_stack_info.
3426 All callers updated. Remove saving of state now saved by
3427 save_inferior_thread_state.
3428 (restore_inferior_status): Remove restoration of state now done by
3429 restore_inferior_thread_state.
3430 (discard_inferior_status): Remove freeing of registers, now done by
3431 discard_inferior_thread_state.
3433 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3435 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
3436 at a time, times NUM_TO_SCROLL.
3437 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
3438 fetch the selected frame if there is no stack.
3440 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3443 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
3445 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
3446 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
3447 is thrown while handling an event, finish the thread state.
3448 (normal_stop): Use finish_thread_state cleanup.
3449 * infcmd.c (run_command_1): If an error is thrown while starting
3450 the inferior, finish the thread state.
3452 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3454 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
3455 skip breakpoints without a location (pending breakpoints).
3457 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3460 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
3462 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
3464 * thread.c (thread_command): Move call to annotate_thread_changed
3466 (do_captured_thread_select): ... here, to avoid printing an
3467 annotation if the thread change generates an exception.
3469 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3471 * NEWS: Document x86_64/MinGW as a new native configuration.
3473 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3475 * NEWS: Move the documentation of "info os processes" to
3476 the appropriate section (documenting the new commands).
3478 2009-01-15 Doug Evans <dje@google.com>
3480 * target.h (target_signal_to_string): Make return type const char *.
3481 (target_signal_to_name): Ditto.
3482 (target_signal_from_name): Make arg const char *.
3483 * infrun.c (sig_print_info): Update.
3484 * signals/signals.c (signals): Make array and struct members const.
3485 (target_signal_to_string): Make return type const char *.
3486 (target_signal_to_name): Ditto.
3487 (target_signal_from_name): Make arg const char *.
3489 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3490 Tristan Gingold <gingold@adacore.com>
3492 * solist.h (struct target_so_ops): New member bfd_open.
3493 (solib_find): Add prototype.
3494 (solib_bfd_fopen): Add prototype.
3495 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
3496 from solib_bfd_open.
3497 (solib_bfd_open): Use ops->bfd_open override if present. Call
3498 solib_find and solib_bfd_open otherwise.
3500 * objfiles.h (OBJF_KEEPBFD): New define.
3501 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
3502 objfile flag is set.
3503 * solib.c (symbol_add_stub): Do not allocate second BFD for
3504 shared library; use OBJF_KEEPBFD flag on solib objfile.
3506 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3508 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
3510 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3512 * value.h (address_of_variable): Add prototype.
3513 (locate_var_value): Remove prototype.
3515 * findvar.c (read_var_value): Do not attempt to default frame
3517 (locate_var_value): Remove function.
3518 * valops.c (value_of_variable): Retrieve selected frame for
3519 symbols that require a frame when called with NULL block.
3520 * valops.c (address_of_variable): New function.
3522 * eval.c (evaluate_subexp_for_address): Call address_of_variable
3523 instead of calling locate_var_value.
3524 (evaluate_subexp_with_coercion): Likewise.
3526 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
3528 * NEWS: Document "define" for prefixed commands.
3529 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
3530 show_user_1 for prefix commands.
3531 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
3532 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
3533 commands. Return the containing command list.
3534 (define_command, document_command): Update to handle prefix commands.
3535 (show_user_1): Add prefix and name arguments. Handle prefix
3537 * cli/cli-script.h (show_user_1): Update prototype.
3539 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
3541 * mingw-ser.c (console_select_thread): Add return to make
3543 (pipe_select_thread): Likewise.
3544 (file_select_thread): Likewise.
3546 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3548 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
3551 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3553 * remote.c (extended_remote_mourn_1): Invalidate our notion of
3554 current general thread.
3556 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3558 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
3559 without a live selected thread.
3561 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3563 Update the copyright notice of some of the files I missed
3564 in the previous copyright update.
3566 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3568 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
3569 base address instead of casting it to DWORD.
3571 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
3573 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
3574 for NULL frame pointers.
3576 2009-01-13 Mark Kettenis <kettenis@gnu.org>
3578 * utils.c (host_address_to_string): Reimplement in a way that
3579 avoids the cast of the address to long.
3581 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3583 * mdebugread.c (parse_symbol): Save the symbol private data
3584 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
3585 (psymtab_to_symtab_1): Likewise.
3586 (parse_procedure): Declare variable "e" only in the scope
3587 where it is used. Extract the symbol private data using
3590 2009-01-13 Jim Blandy <jimb@codesourcery.com>
3592 Abstract out common code for copying value locations.
3594 * value.h (set_value_component_location): New declaration.
3595 * value.c (set_value_component_location): New function.
3596 (value_primitive_field): Use it.
3597 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
3598 * valops.c (search_struct_field, value_slice): Same.
3599 * ada-lang.c (coerce_unspec_val_to_type)
3600 (ada_value_primitive_packed_val): Same.
3602 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3604 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
3606 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
3608 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
3610 * i386-cygwin-tdep.c: Ditto.
3611 * i386-windows-nat.c: Ditto.
3612 * windows-nat.h: Ditto.
3613 * windows-tdep.c: Ditto.
3614 * windows-tdep.h: Ditto.
3615 * windows-nat.c: Ditto.
3616 (cygwin_load_start): Redefine as CORE_ADDR.
3617 (cygwin_load_end): Ditto.
3618 (windows_make_so): Coerce result of address arithmetic to uintptr_t
3619 before coercing to CORE_ADDR to avoid a compiler warning.
3620 (handle_exception): Define addr as CORE_ADDR and coerce
3621 ExceptionAddress to uintptr_t before assigining to avoid a compiler
3623 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
3626 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3628 Fix linking with --enable-targets=all:
3629 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
3630 (HFILES_NO_SRCDIR): Add windows-tdep.h.
3631 (ALLDEPFILES): Add windows-tdep.c.
3633 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
3635 * win32-nat.h: Delete.
3636 * windows-nat.h: Rename from win32-nat.h.
3637 * win32-nat.c: Delete.
3638 * windows-nat.c: Rename from win32-nat.c.
3639 * win32-termcap.c: Delete.
3640 * windows-termcap.c: Rename from win32-termcap.c.
3641 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
3642 * configure.ac: Handle rename from win32-termcap.c ->
3644 * configure: Regenerate.
3645 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
3646 -> windows-termcap.c.
3647 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
3649 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
3650 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
3652 (win32_make_so): Handle cygwin compiler warning due to change of
3653 load_addr from DWORD to LPVOID.
3654 (handle_load_dll): Use %p in format string to properly print address
3655 and avoid a compiler warning.
3656 (DEBUG_EXCEPTION_SIMPLE): Ditto.
3657 (handle_exception): Ditto.
3658 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
3659 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
3661 * config/i386/mingw.mh: Ditto.
3662 * config/i386/mingw64.mh: Ditto.
3664 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3666 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
3667 arrayprint_recurse_level to a parameter. Update all the callers. New
3668 comment at autovariables.
3670 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3672 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
3675 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3677 * target.c (target_xfer_partial): Use host_address_to_string to
3678 print the address of readbuf and writebuf. Cast the address of
3679 elements inside the myaddr buffer into intptr_t.
3680 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
3681 Cast the address of elements inside the myaddr buffer into
3684 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3686 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
3687 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
3688 * configure.host, configure.tgt: Add handling for x86_64/windows.
3689 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
3690 and amd64-windows-tdep.c.
3692 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3694 * win32-tdep.h, win32-tdep.c: New files.
3695 * i386-cygwin-tdep.h: Delete.
3696 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
3698 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
3699 * win32-nat.c: Likewise.
3700 * configure.tgt: Add win32-tdep.o to the list of target object
3701 files for i386-cygwin and i386-mingw targets.
3703 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3705 * win32-nat.h: New file.
3706 * win32-nat.c (mappings): Initialize to NULL.
3707 (win32_set_context_register_offsets): New function.
3708 * i386-windows-nat.c: New file.
3709 (mappings): Moved here from win32-nat.c.
3710 (_initialize_i386_windows_nat): New function.
3711 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
3712 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
3714 2009-01-09 Andreas Schwab <schwab@suse.de>
3716 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
3718 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
3720 * gdbtypes.c (append_composite_type_field): Correct the location of
3723 2009-01-09 Pedro Alves <pedro@codesourcery.com>
3725 * defs.h (deprecated_error_hook): Delete declaration.
3726 * interps.c (clear_interpreter_hooks): Adjust.
3727 * remote-sim.c (gdb_os_error): Don't try to call
3728 deprecated_error_hook. No need to call exit anymore.
3729 * top.c (deprecated_error_hook): Delete.
3731 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3733 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
3734 to print the address of the gdbarch pointer.
3736 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3738 * gdbarch.sh: Fix all the compilation errors on amd64-windows
3739 due to casting a pointer to a long when printing a function
3740 address. Instead, use host_address_to_string to convert our
3741 address to a string.
3742 * gdbarch.c: Regenerate.
3744 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3746 * event-top.c (async_disconnect, async_stop_sig): use "raise"
3747 instead of "kill" to raise a signal.
3749 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3751 * win32-nat.c (get_module_name): Change the type of parameter
3752 "base_address" to LPVOID. Remove unnecessary cast.
3753 (struct lm_info): Change type of load_addr to LPVOID.
3754 (win32_make_so): Change the type of parameter "load_addr"
3755 to LPVOID. Remove some unnecessary casts.
3756 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
3757 (win32_xfer_shared_libraries): Add missing cast.
3759 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3761 * win32-nat.c (has_detach_ability, set_process_privilege):
3762 Cast the result of GetProcAddress to (void *) to avoid
3763 a compilation warning.
3765 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3767 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
3770 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3772 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
3773 definition of local variable "done".
3774 (info_w32_command, handle_exception): Remove unnecessary cast.
3776 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3778 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
3779 DebugSetProcessKillOnExit. Update all uses in this file.
3780 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
3781 Update all uses in this file.
3783 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3785 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
3786 and use it when pushing the target.
3787 (win32_attach, win32_create_inferior): Update call to
3788 do_initial_win32_stuff.
3789 (win32_detach, win32_mourn_inferior): Use our ops parameter
3790 instead of the global win32_ops to unpush the target.
3792 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3794 * ser-mingw.c (ser_windows_open): Use proper type when casting
3795 in call to _open_osfhandle.
3797 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
3799 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
3801 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3803 * CONTRIBUTE: Minor reformatting.
3805 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
3807 * MAINTAINERS: Add myself to Write After Approval.
3808 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
3811 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
3813 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
3814 Call exit to make it obvious to GCC.
3816 2009-01-08 Tom Tromey <tromey@redhat.com>
3818 PR breakpoints/9350:
3819 * varobj.c (varobj_invalidate): Unconditionally free
3821 * symfile.c (syms_from_objfile): Free local_addr when returning
3823 * exec.c (exec_file_attach): Do cleanups before returning.
3824 (exec_file_command): Likewise.
3825 * corefile.c (reopen_exec_file): Do cleanups before returning.
3826 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
3828 (do_vec_free): New function.
3829 (update_global_location_list): Make a cleanup for old_locations.
3830 Do cleanups before returning. Remove unused variable 'e'.
3831 (find_condition_and_thread): Free result of parsing the
3833 (print_it_typical): Do cleanups before returning.
3834 (breakpoint_re_set_one): Always free sals.sals.
3836 2009-01-08 Joel Brobecker <brobecker@adacore.com>
3837 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3839 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
3842 2009-01-07 Doug Evans <dje@google.com>
3844 * top.c (gdb_prompt_string): Delete, unused.
3846 2009-01-07 Pedro Alves <pedro@codesourcery.com>
3848 Delete ONE_PROCESS_WRITETEXT leftovers.
3850 * breakpoint.c (insert_bp_location): Delete process_warning
3852 (insert_breakpoint_locations): Adjust.
3853 (reattach_breakpoints): Adjust.
3854 * infrun.c (normal_stop): Drop "It might be running in another
3857 2009-01-07 Stan Shebs <stan@codesourcery.com>
3859 * config/pa/linux.mh (XDEPFILES): Remove.
3861 2009-01-07 Doug Evans <dje@google.com>
3863 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
3865 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
3867 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
3868 spacing, a regression from 2008-04-22.
3870 2009-01-07 Joel Brobecker <brobecker@adacore.com>
3872 * utils.c (gdb_print_host_address): Adjust implementation to
3873 reuse host_address_to_string. Move comment explaining the conversion
3874 from host address to string from here...
3875 (host_address_to_string): ... to there.
3877 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3879 * MAINTAINERS: Add myself for write after approval privileges.
3881 2009-01-06 Tom Tromey <tromey@redhat.com>
3883 * value.c (set_internalvar): Use value_free, not xfree.
3885 2009-01-06 Jim Blandy <jimb@red-bean.com>
3887 Check return values of functions declared with warn_unused_result
3888 attribute in GLIBC 2.8.
3889 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
3890 * inflow.c (check_syscall): New function.
3891 (new_tty): Use check_syscall to check return values from open and dup.
3892 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
3893 * main.c (captured_main): Call cwd after setting up gdb_stderr;
3894 check for errors from getcwd.
3895 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
3896 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
3897 (stdio_file_fputs): Same.
3898 * utils.c (internal_vproblem): abort if last-ditch error message
3901 * top.c (gdb_init): Don't set the current directory here; that's
3902 already been done in captured_main.
3904 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
3906 * ser-tcp.c: Adjust includes.
3907 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
3908 (tcp_auto_retry, tcp_retry_limit): Declare.
3909 (TIMEOUT): Remove, in favor of tcp_retry_limit.
3910 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
3911 (wait_for_connect): New function.
3912 (net_open): Use it. Add auto-retry logic.
3913 (set_tcp_cmd, show_tcp_cmd): New functions.
3914 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
3915 and "set/show tcp connect-timeout" commands.
3916 * NEWS: Document new commands.
3918 2009-01-05 Tom Tromey <tromey@redhat.com>
3920 * python/python-internal.h (Py_ssize_t): Define as int.
3922 2009-01-05 Jim Blandy <jimb@red-bean.com>
3924 * MAINTAINERS: Fix my e-mail address as steering committee member.
3926 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3928 Updated copyright notices for most files.
3930 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3932 * top.c (print_gdb_version): Update copyright year.
3934 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3936 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
3938 2009-01-01 Pedro Alves <pedro@codesourcery.com>
3940 PR breakpoints/9681:
3941 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
3942 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
3943 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
3944 retrow all other exceptions.
3946 For older changes see ChangeLog-2008.
3952 version-control: never
projects / deliverable / binutils-gdb.git / blob