1 2015-06-19 Doug Evans <dje@google.com>
3 * NEWS: Mention Sun's version of stabs is no longer supported.
4 * elfread.c (free_elfinfo): Delete. All uses updated.
5 (elfstab_offset_sections): Delete. All uses updated.
6 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
7 * psympriv.h (partial_symtab) <section_offsets>: Delete.
9 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
12 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
14 * common/rsp-low.c (needs_escaping): New.
15 (remote_escape_output): Add unit_size parameter. Refactor to
16 support multi-byte addressable units. Rename parameters.
17 * common/rsp-low.h (remote_escape_output): Add unit_size
18 parameter and rename others. Update doc.
19 * remote.c (align_for_efficient_write): New.
20 (remote_write_bytes_aux): Add unit_size parameter and use it.
21 Rename some variables. Update doc.
22 (remote_xfer_partial): Get unit size and use it.
23 (remote_read_bytes_1): Add unit_size parameter and use it.
24 Rename some variables. Update doc.
25 (remote_write_bytes): Same.
26 (remote_xfer_live_readonly_partial): Same.
27 (remote_read_bytes): Same.
28 (remote_flash_write): Update call to remote_write_bytes_aux.
29 (remote_write_qxfer): Update call to remote_escape_output.
30 (remote_search_memory): Same.
31 (remote_hostio_pwrite): Same.
33 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
35 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
36 locations as inserted.
37 Update and expand comment about permanent locations.
38 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
39 Move comment to add_location_to_breakpoint.
40 (update_global_location_list): Don't error out if a permanent
41 breakpoint is not marked inserted.
42 Don't error out if a non-permanent breakpoint location is inserted on
43 top of a permanent breakpoint.
45 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
47 * breakpoint.c (make_breakpoint_permanent): Remove unused
49 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
51 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
54 * NEWS: Mention new GDBHISTSIZE behavior.
55 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
56 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
58 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
60 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
61 * top.c (init_history): Read from GDBHISTSIZE instead of
63 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
65 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
67 * top.c (gdb_safe_append_history): Do not call
68 history_truncate_file if the history is not stifled.
70 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
72 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
73 * syscalls/s390x-linux.xml: Likewise.
75 2015-06-16 Michael Eager <eager@eagercon.com>
77 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
79 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
81 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
82 target_terminal_ours_for_output() before calling
83 tui_show_frame_info(), and restore the original terminal
86 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
88 * arm-linux-nat.c: Include nat/linux-ptrace.h.
90 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
92 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
94 (mi_cmd_data_write_memory_bytes): Same.
96 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
98 * corefile.c (write_memory): Update doc.
99 * gdbcore.h (write_memory): Same.
101 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
103 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
104 (dump_mapping_p): Use it for parameter filterflags.
105 (linux_find_memory_regions_full): Use it for variable filterflags.
107 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
108 Jan Kratochvil <jan.kratochvil@redhat.com>
110 Merge multiple hex conversions.
111 * monitor.c: Include rsp-low.h.
112 (fromhex): Remove definition.
114 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
115 Jan Kratochvil <jan.kratochvil@redhat.com>
117 Move utility functions to common/.
118 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
119 Move defs to common/common-utils.c.
120 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
121 (skip_to_space_const): Move decls to common/common-utils.h.
122 * common/common-defs.h: Move include of common-types.h before
124 * common/common-utils.c: Include host-defs.h and ctype.h.
125 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
127 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
129 * common/common-utils.h (strtoulst): Move decl from utils.h.
130 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
131 Move from cli/cli-utils.h.
132 * common/host-defs.h: Include limits.h.
133 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
134 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
135 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
136 common/common-utils.h.
137 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
138 (strtoulst): Move to common/common-utils.c.
139 * utils.h (strtoulst): Moved decl to common/common-utils.h.
141 2015-06-15 Yao Qi <yao.qi@linaro.org>
143 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
145 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
147 * build-id.c: Don't include elf-bfd.h.
148 (build_id_bfd_get): Use bfd_build_id.
149 (build_id_verify): Ditto.
151 (find_separate_debug_file_by_buildid): Ditto.
152 * python/py-objfile.c: Don't include elf-bfd.h.
153 (objfpy_get_build_id) Use bfd_build_id.
154 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
155 * coffread.c: Include build-id.h.
156 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
158 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
160 * windows-nat.c (do_windows_fetch_inferior_registers)
161 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
162 conditional with __CYGWIN__.
164 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
166 * completer.c: Add arch-utils.h include.
167 (enum reg_completer_targets): New enum.
168 (reg_or_group_completer_1): New function containing old
169 reg_or_group_completer, add and use new parameter to control what
170 is completed on. Use get_current_arch rather than architecture of
171 currently selected frame.
172 (reg_or_group_completer): Call new reg_or_group_completer_1.
173 (reggroup_completer): Call new reg_or_group_completer_1.
174 * completer.h (reggroup_completer): Add declaration.
175 * tui/tui-regs.c: Add 'completer.h' include.
176 (tui_reg_next_command): Renamed to...
177 (tui_reg_next): ...this. Adjust parameters and return rather than
179 (tui_reg_prev_command): Renamed to...
180 (tui_reg_prev): ...this. Adjust parameters and return rather than
182 (tui_reg_float_command): Delete.
183 (tui_reg_general_command): Delete.
184 (tui_reg_system_command): Delete.
185 (tui_reg_command): Rewrite to perform switching of register group.
187 (tuireglist): Remove.
188 (tui_reggroup_completer): New function.
189 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
190 creation of 'tui reg' command.
191 * NEWS: Add comment about 'tui reg' changes.
193 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
195 * target.c (target_read): Consider addressable unit size when
196 reading from a memory object.
197 (read_memory_robust): Same.
198 (read_whatever_is_readable): Same.
199 (target_write_with_progress): Consider addressable unit size
200 when writing to a memory object.
201 * target.h (target_read): Update documentation.
202 (target_write): Add documentation.
204 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
206 * arch-utils.h (default_addressable_memory_unit_size): New.
207 * arch-utils.c (default_addressable_memory_unit_size): New.
208 * gdbarch.sh (addressable_memory_unit_size): New.
209 * gdbarch.h: Re-generate.
210 * gdbarch.c: Re-generate.
212 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
214 * target.c (target_read): Rename variables and use
216 (target_read_with_progress): Same.
217 (read_memory_robust): Constify parameters and rename
219 (read_whatever_is_readable): Constify parameters,
220 rename variables, adjust formatting.
221 * target.h (read_memory_robust): Constify parameters.
223 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
225 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
226 synthetic (non-AltiVec) vector types.
227 (ppc64_sysv_abi_return_value): Likewise.
229 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
232 * breakpoint.c (create_breakpoint): Save extra_string for
235 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
237 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
238 and bt_mask to CORE_ADDR.
240 2015-06-11 Gary Benson <gbenson@redhat.com>
242 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
243 (mnsh_recv_message): Likewise.
245 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
247 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
248 long long int and plongest instead of %ll.
250 2015-06-11 Gary Benson <gbenson@redhat.com>
252 * nat/linux-namespaces.c (gdb_wait.h): New include.
253 (sys/wait.h): Do not include.
255 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
257 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
258 end_sequence is true.
260 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
263 * solib-target.c (library_list_start_list): Use explicit NULL
266 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
268 * solib-target.c (library_list_start_list): Do not dereference
269 variable version in its initialization. Make the VERSION check handle
271 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
273 2015-06-10 Gary Benson <gbenson@redhat.com>
275 * NEWS: Announce support for direct access of executable and
276 shared library files when attaching to inferiors in containers
277 on GNU/Linux systems.
279 2015-06-10 Gary Benson <gbenson@redhat.com>
281 * remote.c (struct remote_state) <fs_pid>: New field.
282 (new_remote_state): Initialize the above.
283 (PACKET_vFile_setfs): New enum value.
284 (remote_hostio_set_filesystem): New function.
285 (remote_hostio_open): Call the above.
286 (remote_hostio_unlink): Likewise.
287 (remote_hostio_readlink): Likewise.
288 (_initialize_remote): Register new "set/show remote
289 hostio-setfs-packet" command.
290 * NEWS: Announce new vFile:setfs packet.
292 2015-06-10 Gary Benson <gbenson@redhat.com>
294 * linux-nat.c (nat/linux-namespaces.h): New include.
295 (fileio.h): Likewise.
296 (linux_nat_filesystem_is_local): New function.
297 (linux_nat_fileio_pid_of): Likewise.
298 (linux_nat_fileio_open): Likewise.
299 (linux_nat_fileio_readlink): Likewise.
300 (linux_nat_fileio_unlink): Likewise.
301 (linux_nat_add_target): Initialize to_filesystem_is_local,
302 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
303 (_initialize_linux_nat): New "set/show debug linux-namespaces"
305 * NEWS: Mention new "set/show debug linux-namespaces" commands.
307 2015-06-10 Gary Benson <gbenson@redhat.com>
309 * target.h (struct inferior): New forward declaration.
310 (struct target_ops) <to_filesystem_is_local>: Update comment.
311 (struct target_ops) <to_fileio_open>: New argument inf.
312 Update comment. All implementations updated.
313 (struct target_ops) <to_fileio_unlink>: Likewise.
314 (struct target_ops) <to_fileio_readlink>: Likewise.
315 (target_filesystem_is_local): Update comment.
316 (target_fileio_open): New argument inf. Update comment.
317 (target_fileio_unlink): Likewise.
318 (target_fileio_readlink): Likewise.
319 (target_fileio_read_alloc): Likewise.
320 (target_fileio_read_stralloc): Likewise.
321 * target.c (target_fileio_open): New argument inf.
322 Pass inf to implementation. Update debug printing.
323 (target_fileio_unlink): Likewise.
324 (target_fileio_readlink): Likewise.
325 (target_fileio_read_alloc_1): New argument inf. Pass inf
326 to target_fileio_open.
327 (target_fileio_read_alloc): New argument inf. Pass inf to
328 target_fileio_read_alloc_1.
329 (target_fileio_read_stralloc): Likewise.
330 * gdb_bfd.c (inferior.h): New include.
331 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
332 argument with new argument "inferior". Pass inferior to
334 (gdb_bfd_open): Supply inferior argument to
335 gdb_bfd_iovec_fileio_open.
336 * linux-tdep.c (linux_info_proc): Supply inf argument to
337 relevant target_fileio calls.
338 (linux_find_memory_regions_full): Likewise.
339 (linux_fill_prpsinfo): Likewise.
340 * remote.c (remote_filesystem_is_local): Supply inf
341 argument to remote_hostio_open.
342 (remote_file_put): Likewise.
343 (remote_file_get): Likewise.
344 (remote_file_delete): Supply inf argument to
345 remote_hostio_unlink.
347 2015-06-10 Gary Benson <gbenson@redhat.com>
349 * inf-child.c (inf_child_fileio_open): Replace comment.
350 (inf_child_fileio_pwrite): Likewise.
351 (inf_child_fileio_pread): Likewise.
352 (inf_child_fileio_fstat): Insert blank line before comment.
353 (inf_child_fileio_close): Replace comment.
354 (inf_child_fileio_unlink): Likewise.
355 (inf_child_fileio_readlink): Likewise.
356 * remote.c (remote_hostio_open): Likewise.
357 (remote_hostio_pread): Likewise.
358 (remote_hostio_pwrite): Likewise.
359 (remote_hostio_close): Likewise.
360 (remote_hostio_unlink): Likewise.
361 (remote_hostio_readlink): Likewise.
362 (remote_hostio_fstat): Likewise.
363 (remote_filesystem_is_local): Likewise.
364 * target.c (target_fileio_open): Likewise.
365 (target_fileio_pwrite): Likewise.
366 (target_fileio_pread): Likewise.
367 (target_fileio_fstat): Insert blank line before comment.
368 (target_fileio_close): Replace comment.
369 (target_fileio_unlink): Likewise.
370 (target_fileio_readlink): Likewise.
371 (target_fileio_read_alloc): Likewise.
372 (target_fileio_read_stralloc): Likewise.
374 2015-06-10 Gary Benson <gbenson@redhat.com>
376 * linux-thread-db.c (nat/linux-namespaces.h): New include.
377 (check_pid_namespace_match): Use linux_ns_same rather than
378 linux_proc_pid_get_ns to spot PID namespace mismatches.
379 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
380 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
382 2015-06-10 Gary Benson <gbenson@redhat.com>
384 * configure.ac (AC_CHECK_FUNCS): Add setns.
385 * config.in: Regenerate.
386 * configure: Likewise.
387 * nat/linux-namespaces.h: New file.
388 * nat/linux-namespaces.c: Likewise.
389 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
390 (linux-namespaces.o): New rule.
391 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
392 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
393 * config/arm/linux.mh (NATDEPFILES): Likewise.
394 * config/i386/linux.mh (NATDEPFILES): Likewise.
395 * config/i386/linux64.mh (NATDEPFILES): Likewise.
396 * config/ia64/linux.mh (NATDEPFILES): Likewise.
397 * config/m32r/linux.mh (NATDEPFILES): Likewise.
398 * config/m68k/linux.mh (NATDEPFILES): Likewise.
399 * config/mips/linux.mh (NATDEPFILES): Likewise.
400 * config/pa/linux.mh (NATDEPFILES): Likewise.
401 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
402 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
403 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
404 * config/s390/linux.mh (NATDEPFILES): Likewise.
405 * config/sparc/linux.mh (NATDEPFILES): Likewise.
406 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
407 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
408 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
410 2015-06-10 Gary Benson <gbenson@redhat.com>
412 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
413 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
414 (make_cleanup_close): Likewise.
415 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
416 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
417 (make_cleanup_close): Likewise.
419 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
421 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
422 from SuspendThread().
424 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
426 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
427 from OutputDebugString.
429 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
430 Mircea Gherzan <mircea.gherzan@intel.com>
432 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
433 MPX_BT_MASK_32): New macros.
434 (i386_mpx_set_bounds): New function that implements
435 the command "set-mpx-bound".
436 (i386_mpx_enabled): Helper function to test MPX availability.
437 (i386_mpx_bd_base): Helper function to calculate the base directory
439 (i386_mpx_get_bt_entry): Helper function to access a bound
441 (i386_mpx_print_bounds): Effectively display bound information.
442 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
444 (_initialize_i386_tdep):
445 Add "bound" to the commands "show mpx" and "set mpx" commands.
446 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
447 and "show mpx" commands.
448 * NEWS: List new commands for MPX support.
450 2015-06-09 Gary Benson <gbenson@redhat.com>
452 * common/fileio.h (fileio_to_host_mode): New declaration.
453 * common/fileio.c (fileio_to_host_mode): New Function.
454 * inf-child.c (inf_child_fileio_open): Process mode argument
455 with fileio_to_host_mode.
457 2015-06-09 Gary Benson <gbenson@redhat.com>
459 * common/fileio.c (fileio_mode_pack): Fix preprocessor
462 2015-06-05 Gary Benson <gbenson@redhat.com>
464 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
465 * remote.c (remote_filesystem_is_local): ...here.
467 2015-06-04 Yao Qi <yao.qi@linaro.org>
469 * gdbarch.c: Regenerate it.
471 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
473 * arch-utils.c (default_infcall_munmap): New.
474 * arch-utils.h (default_infcall_munmap): New declaration.
475 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
476 (munmap_list_free, munmap_listp_free_cleanup): New.
477 (struct setup_sections_data): Add field munmap_list_headp.
478 (setup_sections): Call munmap_list_add.
479 (compile_object_load): New variable munmap_list_head, initialize
480 setup_sections_data.munmap_list_headp, return munmap_list_head.
481 * compile/compile-object-load.h (struct munmap_list): New declaration.
482 (struct compile_module): Add field munmap_list_head.
483 (munmap_list_free): New declaration.
484 * compile/compile-object-run.c (struct do_module_cleanup): Add field
486 (do_module_cleanup): Call munmap_list_free.
487 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
488 * gdbarch.c: Regenerate.
489 * gdbarch.h: Regenerate.
490 * gdbarch.sh (infcall_munmap): New.
491 * linux-tdep.c (linux_infcall_munmap): New.
492 (linux_init_abi): Install it.
494 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
497 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
499 2015-06-02 Yao Qi <yao.qi@linaro.org>
501 * i386-linux-nat.c: Include linux-nat.h.
503 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
504 Jan Kratochvil <jan.kratochvil@redhat.com>
507 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
509 * dwarf2loc.c (chain_candidate): Likewise.
511 2015-06-01 Yao Qi <yao.qi@linaro.org>
513 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
514 (store_vfp_regs): Use PTRACE_SETREGSET.
516 2015-06-01 Yao Qi <yao.qi@linaro.org>
518 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
519 (fetch_fpregs): Likewise.
520 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
521 (store_fpregs): Likewise.
523 2015-06-01 Yao Qi <yao.qi@linaro.org>
525 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
526 (fetch_regs): Likewise.
527 (store_regs): Use PTRACE_SETREGSET.
528 (store_register): Likewise.
530 2015-06-01 Yao Qi <yao.qi@linaro.org>
532 * arm-linux-nat.c (arm_linux_read_description): Check whether
533 kernel supports PTRACE_GETREGSET.
535 2015-06-01 Yao Qi <yao.qi@linaro.org>
537 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
538 * linux-nat.c: ... here.
539 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
541 * linux-nat.h: ... here.
543 2015-06-01 Yao Qi <yao.qi@linaro.org>
545 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
546 * i386-linux-nat.c: Likewise.
547 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
548 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
549 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
550 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
551 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
553 2015-05-30 Eli Zaretskii <eliz@gnu.org>
555 * go32-nat.c (go32_xfer_memory): Fix the return value to be
556 compatible to what read_child and write_child return. This
557 unbreaks that DJGPP build of GDB which was broken since v7.7.
559 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
561 * MAINTAINERS (Write After Approval): Add Martin Galvan.
563 2015-05-29 Roland McGrath <mcgrathr@google.com>
566 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
567 rather than internal_error for an unrecognized value.
569 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
571 * xtensa-tdep.c (xtensa_pseudo_register_read)
572 (xtensa_pseudo_register_write): Don't alias last pseudo register
575 2015-05-28 Don Breazeal <donb@codesourcery.com>
577 * infrun.c (follow_fork_inferior): Ensure the use of
578 process-style ptids (pid,0,0) in verbose/debug "Detaching"
581 2015-05-28 Doug Evans <dje@google.com>
583 * dwarf2read.c (record_line_ftype): Remove, duplicate.
585 2015-05-28 Yao Qi <yao.qi@linaro.org>
587 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
588 (arm_linux_fetch_inferior_registers): Use
589 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
590 (arm_linux_store_inferior_registers): Likewise.
591 (arm_linux_read_description): Don't set
592 arm_linux_has_wmmx_registers.
593 * arm-tdep.c (arm_gdbarch_init): Set
594 tdep->have_wmmx_registers according target descriptions.
595 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
598 2015-05-28 Yao Qi <yao.qi@linaro.org>
600 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
601 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
602 instead of arm_linux_vfp_register_count.
603 (store_vfp_regs): Likewise.
604 (arm_linux_fetch_inferior_registers): Likewise.
605 (arm_linux_store_inferior_registers): Likewise.
606 (arm_linux_read_description): Don't set
607 arm_linux_vfp_register_count.
608 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
610 * arm-tdep.c (arm_gdbarch_init): Add assert on
612 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
613 field to vfp_register_count. All users updated.
615 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
617 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
618 ELFOSABI_GNU binaries.
620 2015-05-27 Doug Evans <dje@google.com>
622 * dwarf2read.c (lnp_state_machine): New typedef.
623 (lnp_reader_state): New typedef.
624 (dwarf_record_line_1): Renamed from dwarf_record_line.
626 (dwarf_record_line): New function.
627 (init_lnp_state_machine): New function.
628 (check_line_address): Replace p_record_line parameter with state.
630 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
631 Update to record state in lnp_state_machine.
633 2015-05-27 Doug Evans <dje@google.com>
635 * dwarf2read.c (record_line_ftype): New typedef.
636 (check_line_address): New function.
637 (dwarf_decode_lines_1): Call it.
639 2015-05-27 Doug Evans <dje@google.com>
641 * NEWS: Mention "set debug dwarf-line".
642 * dwarf2read.c (dwarf_line_debug): New static global.
643 (add_include_dir): Add debug dwarf-line support.
644 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
645 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
647 2015-05-27 Doug Evans <dje@google.com>
649 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
651 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
652 * cp-support.h (cp_lookup_nested_symbol): Update.
654 2015-05-27 Doug Evans <dje@google.com>
657 * block.c (block_find_symbol): New function.
658 (block_find_non_opaque_type): Ditto.
659 (block_find_non_opaque_type_preferred): Ditto.
660 * block.h (block_symbol_matcher_ftype): New typedef.
661 (block_find_symbol): Declare.
662 (block_find_non_opaque_type): Ditto.
663 (block_find_non_opaque_type_preferred): Ditto.
664 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
665 * psymtab.c (psym_lookup_symbol): Ditto.
666 * symtab.c (basic_lookup_transparent_type_1): New function.
667 (basic_lookup_transparent_type): Call it.
669 2015-05-27 Yao Qi <yao.qi@linaro.org>
671 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
672 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
674 2015-05-27 Yao Qi <yao.qi@linaro.org>
676 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
678 (aarch64_record_load_store): Likewise.
680 2015-05-26 Doug Evans <dje@google.com>
682 PR c++/18141, c++/18417.
683 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
686 2015-05-26 Doug Evans <dje@google.com>
688 * NEWS: Add entries for command renamings.
689 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
691 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
692 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
694 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
695 All callers updated. Fix spelling of DWARF in help text.
696 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
698 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
700 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
701 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
702 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
704 (show_dwarf_always_disassemble): Renamed from
705 show_dwarf2_always_disassemble. All callers updated.
706 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
707 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
708 "set/show dwarf max-cache-age". Rename
709 "set/show dwarf2 always-disassemble" to
710 "set/show dwarf always-disassemble". Rename
711 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
712 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
714 2015-05-26 Doug Evans <dje@google.com>
717 * python/py-lazy-string.c (stpy_convert_to_value): Use
718 gdbpy_gdb_memory_error not PyExc_MemoryError.
719 (gdbpy_create_lazy_string_object): Ditto.
721 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
723 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
725 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
727 * tui/tui-regs.c (tui_reg_prev_command): New function.
728 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
729 * reggroups.c (reggroup_prev): New function.
730 * reggroups.h (reggroup_prev): Add declaration. Update comment.
732 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
733 Yao Qi <yao.qi@linaro.org>
735 * aarch64-linux-tdep.c: Include linux-record.h and
737 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
738 (aarch64_syscall): New enum.
739 (aarch64_canonicalize_syscall): New function.
740 (aarch64_all_but_pc_registers_record): New function.
741 (aarch64_linux_syscall_record): New function.
742 (aarch64_linux_init_abi): Install AArch64 process record
743 handler. Update to handle syscall recording.
744 * aarch64-tdep.c: Include record.h and record-full.h.
745 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
746 (struct aarch64_mem_r): Define.
747 (aarch64_record_result): New enum.
748 (struct insn_decode_record): Define.
749 (insn_decode_record): New typedef.
750 (aarch64_record_data_proc_reg): New function.
751 (aarch64_record_data_proc_imm): New function.
752 (aarch64_record_branch_except_sys): New function.
753 (aarch64_record_load_store): New function.
754 (aarch64_record_data_proc_simd_fp): New function.
755 (aarch64_record_asimd_load_store): New function.
756 (aarch64_record_decode_insn_handler): New function.
757 (deallocate_reg_mem): New function.
758 (aarch64_process_record): New function.
759 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
761 (aarch64_process_record): New extern declaration.
762 * configure.tgt: Add linux-record.o to gdb_target_obs.
763 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
765 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
767 * NEWS: Add a note on process record-replay support on aarch64*-linux*
770 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
772 * amd64-tdep.c: Replace in_function_epilogue_p with
773 stack_frame_destroyed_p throughout.
774 * arch-utils.c: Ditto.
775 * arch-utils.h: Ditto.
777 * breakpoint.c: Ditto.
779 * hppa-tdep.c: Ditto.
780 * i386-tdep.c: Ditto.
781 * mips-tdep.c: Ditto.
782 * nios2-tdep.c: Ditto.
783 * rs6000-tdep.c: Ditto.
784 * s390-linux-tdep.c: Ditto.
785 * score-tdep.c: Ditto.
787 * sparc-tdep.c: Ditto.
788 * sparc-tdep.h: Ditto.
789 * sparc64-tdep.c: Ditto.
791 * tic6x-tdep.c: Ditto.
792 * tilegx-tdep.c: Ditto.
793 * xstormy16-tdep.c: Ditto.
794 * gdbarch.c, gdbarch.h: Re-generated.
796 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
798 * NEWS: Mention 'tui enable' and 'tui disable'.
799 * tui/tui.c (tui_enable_command): New function.
800 (tui_disable_command): New function.
801 (_initialize_tui): New function.
803 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
805 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
807 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
809 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
812 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
814 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
816 (tui_set_layout_for_display_command): ...here, before calling
817 tui_set_layout. Only set the layout if gdb has not already
818 entered the TUI_FAILURE state.
820 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
822 * tui/tui-layout.c (layout_completer): New function.
823 (_initialize_tui_layout): Set completer on layout command.
825 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
827 * tui/tui-layout.c (tui_set_layout): Remove
828 tui_register_display_type parameter. Remove all checking of this
829 parameter, and reindent function. Update header comment.
830 (tui_set_layout_for_display_command): Rename to...
831 (tui_set_layout_by_name): ...this, and don't check for different
832 register class types, don't pass a tui_register_display_type to
833 tui_set_layout. Update header comment.
834 (layout_names): Remove register set specific names.
835 * tui/tui-layout.h (tui_set_layout): Remove
836 tui_register_display_type parameter.
837 * tui/tui.c (tui_rl_change_windows): Don't pass a
838 tui_register_display_type to tui_set_layout.
839 (tui_rl_delete_other_windows): Likewise.
840 (tui_enable): Likewise.
841 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
842 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
843 (TUI_GENERAL_REGS_NAME): Remove.
844 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
845 (TUI_SPECIAL_REGS_NAME): Remove.
846 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
847 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
848 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
849 (enum tui_register_display_type): Remove.
850 (struct tui_layout_def): Remove regs_display_type and
851 float_regs_display_type fields.
852 (struct tui_data_info): Remove regs_display_type field.
853 (tui_layout_command): Use new name for
854 tui_set_layout_for_display_command.
855 * tui/tui-data.c (layout_def): Don't initialise removed fields.
856 (tui_clear_win_detail): Don't initialise removed fields of
858 * tui/tui-regs.c (tui_show_registers): Use new name for
859 tui_set_layout_for_display_command.
860 * tui/tui.h (tui_set_layout_for_display_command): Rename
862 (tui_set_layout_by_name): ...this.
863 * printcmd.c (display_command): Remove tui related layout call,
866 2015-05-20 Joel Brobecker <brobecker@adacore.com>
868 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
869 (handle_inferior_event): New function.
871 2015-05-20 Joel Brobecker <brobecker@adacore.com>
873 * ada-lang.c (to_fixed_array_type): Rename local variable
874 typename into type_name.
876 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
878 Fix ASAN crash for gdb.compile/compile.exp.
879 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
881 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
883 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
884 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
885 * compile/compile-object-load.c (setup_sections, compile_object_load):
887 * compile/compile.c (compile_to_object): Likewise.
889 2015-05-16 Doug Evans <xdje42@gmail.com>
891 * NEWS: Mention support for unbuffered Guile memory ports.
892 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
893 (ioscm_lseek_address): Improve overflow calculation.
894 (gdbscm_memory_port_fill_input): Add assert.
895 (gdbscm_memory_port_write): Handle unbuffered ports.
896 Handle large writes identical to Guile's fport_write.
897 (gdbscm_memory_port_seek): Fix seeking past end check.
898 (gdbscm_memory_port_close): Handle closing unbuffered port.
899 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
900 (ioscm_init_memory_port): Handle unbuffered ports.
901 (ioscm_reinit_memory_port): Ditto.
902 (ioscm_init_memory_port): Update size calculation.
903 (gdbscm_open_memory): Support zero sized ports.
905 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
907 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
908 variable compiler warnings.
910 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
912 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
914 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
915 Phil Muldoon <pmuldoon@redhat.com>
917 * NEWS (Changes since GDB 7.9): Add compile print.
918 * compile/compile-c-support.c (add_code_header, add_code_footer)
919 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
920 COMPILE_I_PRINT_VALUE_SCOPE.
921 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
922 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
924 * compile/compile-object-load.c: Include block.h.
925 (get_out_value_type): New function.
926 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
927 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
929 * compile/compile-object-load.h (struct compile_module): Add fields
930 out_value_addr and out_value_type.
931 * compile/compile-object-run.c: Include valprint.h and compile.h.
932 (struct do_module_cleanup): Add fields out_value_addr and
934 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
935 COMPILE_I_PRINT_VALUE_SCOPE.
936 (compile_object_run): Propagate out_value_addr and out_value_type.
938 * compile/compile.c: Include valprint.h.
939 (compile_print_value, compile_print_command): New functions.
940 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
941 (_initialize_compile): Update compile code help text. Install
942 compile_print_command.
943 * compile/compile.h (compile_print_value): New prototype.
944 * defs.h (enum compile_i_scope_types): Add
945 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
947 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
949 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
950 Rely on its parameter count.
951 (compile_object_load): Replace lookup_minimal_symbol_text by
952 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
954 * compile/compile-object-load.h (struct compile_module): Replace
955 func_addr by func_sym.
956 * compile/compile-object-run.c: Include block.h.
957 (compile_object_run): Reset module variable after it is freed. Use
958 FUNC_SYM instead of FUNC_ADDR. Rely on it.
960 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
962 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
963 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
964 (c_compute_program): Call generate_register_struct after typedefs.
965 * compile/compile-loc2c.c (push, pushf_register_address)
966 (pushf_register): Cast to GCC_UINTPTR.
967 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
968 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
969 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
970 * compile/compile.c (_initialize_compile): Enable warnings for
973 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
975 * cli/cli-script.c (execute_control_command): Update
976 eval_compile_command caller.
977 * compile/compile-object-load.c (compile_object_load): Add parameters
978 scope and scope_data. Set them.
979 * compile/compile-object-load.h (struct compile_module): Add fields
980 scope and scope_data.
981 (compile_object_load): Add parameters scope and scope_data.
982 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
983 scope and scope_data.
984 (compile_object_run): Propagate the fields scope and scope_data.
985 * compile/compile.c (compile_file_command, compile_code_command):
986 Update eval_compile_command callers.
987 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
988 * compile/compile.h (eval_compile_command): Add parameter scope_data.
989 * defs.h (struct command_line): Add field scope_data.
991 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
993 * printcmd.c (struct format_data): Move it to valprint.h.
994 (print_command_parse_format, print_value): New functions from ...
995 (print_command_1): ... here. Call them.
996 * valprint.h (struct format_data): Move it here from printcmd.c.
997 (print_command_parse_format, print_value): New declarations.
999 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1001 * compile/compile-object-load.c (compile_object_load): Add
1002 COMPILE_DEBUG message.
1004 2015-05-15 Jerome Guitton <guitton@adacore.com>
1006 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
1007 index to get element instead of enum value.
1008 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
1009 of index to compute length, but enum values to compute bounds.
1010 (ada_array_length): Use enum position of index instead of enum value.
1011 (pos_atr): Move position computation to...
1012 (ada_evaluate_subexp): Use enum values to compute bounds.
1013 * gdbtypes.c (discrete_position): ...this new function.
1014 * gdbtypes.h (discrete_position): New function declaration.
1015 * valprint.c (val_print_array_elements): Call discrete_position
1016 to handle array indexed by non-contiguous enumeration types.
1018 2015-05-15 Jerome Guitton <guitton@adacore.com>
1020 * ada-lang.c (find_parallel_type_by_descriptive_type):
1021 Go through typedefs during lookup.
1022 (to_fixed_array_type): Add support for non-bit packed arrays
1023 as variable-length fields.
1025 2015-05-15 Pedro Alves <palves@redhat.com>
1026 Simon Marchi <simon.marchi@ericsson.com>
1028 * event-loop.c (gdb_notifier) <next_file_handler,
1029 next_poll_fds_index>: New fields.
1030 (get_next_file_handler_to_handle_and_advance): New function.
1031 (delete_file_handler): If deleting the next file handler to
1032 handle, advance to the next file handler.
1033 (gdb_wait_for_event): Bail early if no event fired. Poll file
1034 handlers in round-robin fashion.
1036 2015-05-15 Pedro Alves <palves@redhat.com>
1038 * linux-tdep.c (linux_find_memory_regions_full): Rename local
1039 'private' to 'priv'.
1041 2015-05-15 Pedro Alves <palves@redhat.com>
1043 * nat/linux-nat.h: Include "target/waitstatus.h".
1045 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
1047 * python/py-unwind.c (struct reg_info): Move out of ...
1048 (struct cached_frame_info): ... this scope.
1049 (pending_frame_object_type, unwind_info_object_type): Make extern.
1051 2015-05-15 Joel Brobecker <brobecker@adacore.com>
1053 * ada-lang.c (ada_value_primitive_packed_val): Make sure
1054 accumSize is never negative.
1056 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
1058 * tui/tui-command.c: Remove include of <ctype.h>.
1059 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
1061 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
1063 * dwarf2read.c (die_needs_namespace): Return 1 for
1064 DW_TAG_inlined_subroutine.
1066 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1068 * regcache.c (regcache_cpy_no_passthrough): New declaration.
1069 (regcache_cpy_no_passthrough): Make it static, add function comment.
1070 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
1071 (regcache_cpy_no_passthrough): Remove declaration.
1073 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1075 * gdbthread.h (struct thread_control_state): Update comment for
1077 * infcall.c (run_inferior_call): Update comment about
1079 * infcmd.c (get_return_value): Update comment about stop_registers.
1080 (finish_forward): Update comment about proceed_to_finish.
1081 * infrun.c (stop_registers): Remove.
1082 (clear_proceed_status, normal_stop): Remove stop_registers handling.
1083 * infrun.h (stop_registers): Remove.
1085 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1087 * infcall.c (struct dummy_frame_context_saver)
1088 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
1089 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1090 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1092 (call_function_by_hand_dummy): Move discard_cleanups of
1093 inf_status_cleanup before dummy_frame_push. Call
1094 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
1095 Use dummy_frame_context_saver_get_regs instead of stop_registers.
1096 * infcall.h (struct dummy_frame_context_saver)
1097 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1098 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1100 * infcmd.c: Include infcall.h.
1101 (get_return_value): Add parameter ctx_saver, use it instead of
1103 (print_return_value): Add parameter ctx_saver, pass it.
1104 (struct finish_command_continuation_args): Add field ctx_saver.
1105 (finish_command_continuation): Update print_return_value caller.
1106 (finish_command_continuation_free_arg): Free also ctx_saver.
1107 (finish_forward): Call dummy_frame_context_saver_setup.
1108 * inferior.h (struct dummy_frame_context_saver): New declaration.
1109 (get_return_value): Add parameter ctx_saver.
1110 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
1111 get_return_value caller.
1113 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1115 * dummy-frame.c (struct dummy_frame_dtor_list): New.
1116 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
1117 (remove_dummy_frame): Process dtor_list.
1118 (pop_dummy_frame): Process dtor_list.
1119 (register_dummy_frame_dtor): Maintain dtor_list.
1120 (find_dummy_frame_dtor): Handle dtor_list.
1121 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
1124 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1126 * compile/compile-object-run.c (do_module_cleanup): Add parameter
1128 (compile_object_run): Update do_module_cleanup caller.
1129 * dummy-frame.c: Include infcall.h.
1130 (struct dummy_frame): Update dtor comment.
1131 (remove_dummy_frame): Call dtor.
1132 (pop_dummy_frame): Update dtor caller.
1133 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
1136 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1140 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1142 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
1143 Xmethods now being able to specify a result type to that new
1146 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1148 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
1149 first before resizing the window.
1150 * tui/tui.c (tui_enable): Likewise.
1152 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1154 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
1155 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
1156 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
1157 dummy_dtor parameter.
1158 * infcall.h: Include dummy-frame.h.
1159 (call_function_by_hand_dummy_dtor_ftype): Remove.
1160 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
1163 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1166 * top.c (history_size_setshow_var): Change type to signed.
1167 Initialize to -2. Update documentation.
1168 (set_readline_history_size): Define.
1169 (set_history_size_command): Use it. Remove logic for handling
1171 (init_history): Use set_readline_history_size(). Test for a
1172 value of -2 instead of 0 when determining whether to set a
1173 default history size.
1174 (init_main): Decode the argument of the "size" command as a
1175 zuinteger_unlimited.
1177 2015-05-12 Doug Evans <dje@google.com>
1179 * dwarf2read.c (struct file_entry): Tweak comments.
1180 (get_debug_line_section): Tweak comments.
1182 2015-05-12 Don Breazeal <donb@codesourcery.com>
1184 * NEWS: Announce fork support in the RSP and support
1185 for fork debugging in extended mode.
1187 2015-05-12 Don Breazeal <donb@codesourcery.com>
1189 * remote.c (remote_insert_fork_catchpoint): New function.
1190 (remote_remove_fork_catchpoint): New function.
1191 (remote_insert_vfork_catchpoint): New function.
1192 (remote_remove_vfork_catchpoint): New function.
1193 (pending_fork_parent_callback): New function.
1194 (remove_new_fork_child): New function.
1195 (remote_update_thread_list): Call remote_notif_get_pending_events
1196 and remove_new_fork_child.
1197 (extended_remote_kill): Kill fork child when killing the
1198 parent before follow_fork completes.
1199 (init_extended_remote_ops): Initialize target vector with
1200 new fork catchpoint functions.
1202 2015-05-12 Don Breazeal <donb@codesourcery.com>
1204 * remote.c (remove_vfork_event_p): New function.
1205 (remote_follow_fork): Add vfork event type to event checking.
1206 (remote_parse_stop_reply): New stop reasons "vfork" and
1207 "vforkdone" for RSP 'T' Stop Reply Packet.
1209 2015-05-12 Don Breazeal <donb@codesourcery.com>
1211 * linux-nat.c (linux_nat_ptrace_options): New function.
1212 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
1213 Call linux_nat_ptrace_options and use different argument to
1214 linux_enable_event_reporting.
1215 (_initialize_linux_nat): Delete call to
1216 linux_ptrace_set_additional_flags.
1217 * nat/linux-ptrace.c (current_ptrace_options): Rename to
1218 supported_ptrace_options.
1219 (additional_flags): Delete variable.
1220 (linux_check_ptrace_features): Use supported_ptrace_options.
1221 (linux_test_for_tracesysgood, linux_test_for_tracefork):
1222 Likewise, and remove additional_flags check.
1223 (linux_enable_event_reporting): Change 'attached' argument to
1224 'options'. Use supported_ptrace_options.
1225 (ptrace_supports_feature): Change comment. Use
1226 supported_ptrace_options.
1227 (linux_ptrace_set_additional_flags): Delete function.
1228 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
1229 Delete function prototype.
1230 * remote.c (remote_fork_event_p): New function.
1231 (remote_detach_pid): New function.
1232 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
1233 if doing detach-on-fork.
1234 (remote_follow_fork): New function.
1235 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
1236 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
1237 (init_extended_remote_ops): Initialize to_follow_fork.
1239 2015-05-12 Don Breazeal <donb@codesourcery.com>
1241 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
1242 from static to extern.
1243 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
1244 * remote.c (anonymous enum): <PACKET_fork_event_feature,
1245 * PACKET_vfork_event_feature>: New enumeration constants.
1246 (remote_protocol_features): Add table entries for new packets.
1247 (remote_query_supported): Add new feature queries to qSupported
1250 2015-05-12 Gary Benson <gbenson@redhat.com>
1252 * remote.c (remote_add_inferior): Call exec_file_locate_attach
1253 for fake PIDs as well as real ones.
1254 (remote_pid_to_exec_file): Send empty annex if PID is fake.
1256 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
1258 * NEWS (Python Scripting): Mention the new gdb.Value methods.
1259 * python/py-value.c (valpy_reference_value): New function.
1260 (valpy_const_value): Likewise.
1261 (value_object_methods): Add new methods.
1262 * value.c (make_cv_value): New function.
1263 * value.h (make_cv_value): Declare.
1265 2015-05-08 Yao Qi <yao@codesourcery.com>
1266 Sandra Loosemore <sandra@codesourcery.com>
1268 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
1269 to 'lh->include_dirs' before accessing to it.
1270 (psymtab_include_file_name): Likewise.
1271 (dwarf_decode_lines_1): Likewise.
1272 (dwarf_decode_lines): Likewise.
1273 (file_file_name): Likewise.
1275 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
1277 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
1278 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
1279 (nios2_linux_rt_sigreturn_init): Adjust base address of
1282 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
1284 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
1285 "trap 31" as the breakpoint instruction on all targets.
1287 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1289 * infcmd.c (print_return_value): Remove unused declaration.
1291 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1293 * dwarf2read.c (attr_to_dynamic_prop)
1294 <DW_AT_data_member_location>: Use read_type_die isntead of
1297 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1299 * ada-lang.c (ada_convert_actual): Add handling of formals
1300 passed inside an aligner type.
1302 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1304 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
1306 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
1309 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
1310 Print xmethod matcher status.
1312 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
1314 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
1315 register in the regcache when treating the PSWM register, and vice
1318 2015-05-07 Gary Benson <gbenson@redhat.com>
1320 * linux-thread-db.c (struct thread_db_info)
1321 <td_ta_map_id2thr_p>: Remove field.
1322 (try_thread_db_load_1): Remove initialization for the above.
1324 2015-05-07 Gary Benson <gbenson@redhat.com>
1326 * linux-thread-db.c (struct thread_db_info)
1327 <td_thr_validate_p>: Remove field.
1328 (try_thread_db_load_1): Remove initialization for the above.
1330 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1332 * compile/compile-object-load.c (compile_object_load): Support
1335 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1337 * compile/compile.c (compile_to_object): Make the cmd_string parameter
1338 const. Use new variables for the const compatibility.
1339 (eval_compile_command): Make the cmd_string parameter const.
1340 * compile/compile.h (eval_compile_command): Make the cmd_string
1343 2015-05-06 Joel Brobecker <brobecker@adacore.com>
1345 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
1347 * top.c (deprecated_init_ui_hook): Delete.
1348 (gdb_init): Remove handling of deprecated_init_ui_hook.
1349 * interps.c (clear_interpreter_hooks): Remove handling of
1350 deprecated_init_ui_hook.
1351 * main.c (captured_main): Update comment.
1353 2015-05-06 Joel Brobecker <brobecker@adacore.com>
1355 * solib.c (_initialize_solib): Add "info dll" alias creation.
1356 * windows-nat.c (set_windows_aliases): Delete.
1357 (_initialize_windows_nat): Remove deprecated_init_ui_hook
1359 * NEWS: Add news entry about "info dll" now being available
1362 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1364 * ada-lang.c (value_assign_to_component): Reformat and improve
1365 documentation. Remove all trailing spaces.
1367 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1369 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
1370 Stop counting inlined frames as soon as an out-of-line function
1373 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
1375 * dwarf2read.c (inherit_abstract_dies): Skip
1376 DW_TAG_GNU_call_site dies while inheriting children of an
1377 abstract DIE into a scope.
1378 (read_lexical_block_scope): Inherit abstract DIE's for
1381 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1383 * ada-valprint.c (val_print_packed_array_elements): Delete
1384 variable "len". Add a type-length check when comparing two
1385 consecutive elements of the array. Use the element's actual
1386 length in call to value_contents_eq.
1387 * ada-lang.c (ada_value_primitive_packed_val): Always return
1388 a value whose type has been resolved.
1390 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1392 * ada-lang.c (ada_value_primitive_packed_val): Recompute
1393 BIT_SIZE and LEN if the size of the resolved type is smaller
1394 than BIT_SIZE * HOST_CHAR_BIT.
1396 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1398 * ada-lang.c (ada_value_primitive_packed_val): Use a more
1399 correct address in call to value_at. Adjust call to
1400 value_address accordingly.
1402 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1404 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
1407 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1409 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
1410 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
1412 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
1413 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
1414 (resolve_dynamic_type_internal): Set pinfo.valaddr.
1415 Add handling of addr_stack->valaddr.
1416 (resolve_dynamic_type): Add "valaddr" parameter.
1417 Set pinfo.valaddr field.
1418 * ada-lang.c (ada_discrete_type_high_bound): Update call to
1419 resolve_dynamic_type.
1420 (ada_discrete_type_low_bound): Likewise.
1421 * findvar.c (default_read_var_value): Likewise.
1422 * value.c (value_from_contents_and_address): Likewise.
1424 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1426 * gdbtypes.c (resolve_dynamic_array): Use
1427 create_array_type_with_stride instead of create_array_type.
1429 2015-04-30 DJ Delorie <dj@redhat.com>
1431 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
1434 2015-04-29 Doug Evans <dje@google.com>
1437 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
1438 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
1439 EVAL_AVOID_SIDE_EFFECTS for xmethods.
1440 * extension-priv.h (struct extension_language_ops)
1441 <get_xmethod_result_type>: New member.
1442 * extension.c (get_xmethod_result_type): New function.
1443 * extension.h (get_xmethod_result_type): Declare.
1444 * python/py-xmethods.c (get_result_type_method_name): New static
1446 (py_get_result_type_method_name): Ditto.
1447 (gdbpy_get_xmethod_result_type): New function.
1448 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
1449 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
1450 * python/python.c (python_extension_ops): Add
1451 gdbpy_get_xmethod_result_type.
1452 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
1453 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
1455 (value_x_unop): Ditto.
1456 * value.c (result_type_of_xmethod): New function.
1457 * value.h (result_type_of_xmethod): Declare.
1459 2015-04-29 Gary Benson <gbenson@redhat.com>
1461 * solib.c (solib_find_1): Allow fd argument to be NULL.
1462 (exec_file_find): Update comment.
1463 (solib_find): Likewise.
1464 * exec.c (exec_file_locate_attach): Use NULL as fd
1465 argument to exec_file_find to avoid having to close
1467 * infrun.c (follow_exec): Likewise.
1469 2015-04-28 Doug Evans <dje@google.com>
1472 * python/lib/gdb/printing.py (register_pretty_printer): Handle
1473 name or __name__ attributes. Handle gdb module as first argument.
1475 2015-04-28 Doug Evans <dje@google.com>
1478 * python/py-prettyprint.c (print_children): Verify result of children
1479 iterator. Provide better error message.
1480 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
1481 * python/python.c (gdbpy_print_python_errors_p): New function.
1483 2015-04-28 Doug Evans <dje@google.com>
1485 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
1487 2015-04-28 Sasha Smundak <asmundak@google.com>
1489 * NEWS: Mention gdb.Type.optimized_out method.
1490 * python/py-type.c (typy_optimized_out): New function.
1492 2015-04-28 John Baldwin <jhb@FreeBSD.org>
1494 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
1496 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1498 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
1499 (initialize_utils): Move call of init_page_info() to ...
1500 * top.c (gdb_init): ... here.
1502 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1504 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
1505 (tui_sigwinch_handler): Still update our idea of
1506 the terminal's width and height even when TUI is not active.
1508 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1510 * utils.h (set_screen_width_and_height): Declare.
1511 * utils.c (set_screen_width_and_height): Define.
1512 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
1514 2015-04-28 Gary Benson <gbenson@redhat.com>
1516 * infrun.c (solist.h): New include.
1517 (follow_exec): Use exec_file_find to prefix execd_pathname
1520 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1522 * tui/tui-source.c (tui_set_source_content): Avoid calling
1523 strcpy() when offset is 0.
1525 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1528 * tui/tui-data.c (tui_free_window): Don't free the locator
1529 window when passed an SRC_WIN or a DISASSEM_WIN.
1531 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1533 * tui/tui-data.h (struct tui_win_element): Forward-declare.
1534 (tui_win_content): Move declaration.
1535 (struct tui_gen_win_info): Give 'content' field the
1536 type tui_win_content.
1537 * tui/tui-data.c (init_content_element): Remove redundant and
1539 (tui_add_content_elements): Remove erroneous cast.
1540 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
1542 (tui_get_begin_asm_address): Likewise.
1543 * tui/tui-regs.c (tui_show_registers): Likewise.
1544 (tui_show_register_group): Likewise.
1545 (tui_display_registers_from): Likewise.
1546 (tui_check_register_values): Likewise.
1547 * tui/tui-source.c (tui_set_source_content): Likewise.
1548 (tui_set_source_content_nil): Likewise.
1549 (tui_source_is_displayed): Likewise.
1550 * tui/tui-stack.c (tui_show_locator_content): Likewise.
1551 (tui_set_locator_fullname): Likewise.
1552 (tui_set_locator_info): Likewise.
1553 (tui_show_frame_info): Likewise.
1554 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
1555 (tui_show_source_line): Likewise.
1556 (tui_horizontal_source_scroll): Likewise.
1557 (tui_update_breakpoint_info): Likewise.
1558 (tui_set_exec_info_content): Likewise.
1559 (tui_show_exec_info_content): Likewise.
1560 (tui_alloc_source_buffer): Likewise.
1561 (tui_line_is_displayed): Likewise.
1562 (tui_addr_is_displayed): Likewise.
1564 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1566 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
1567 event if PL_FLAG_EXEC is set.
1568 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
1569 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
1570 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
1571 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
1572 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
1574 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1576 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
1577 [TDP_RFPPWAIT] New variable fbsd_pending_children.
1578 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
1579 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
1580 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
1581 [PT_LWPINFO] (fbsd_wait): New function.
1582 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
1583 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
1584 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
1585 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
1586 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
1587 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
1588 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
1589 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
1590 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
1592 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
1593 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
1594 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
1595 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
1596 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
1597 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
1598 Set "to_post_attach" to "fbsd_post_attach".
1600 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1602 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
1603 (fbsd_find_memory_regions): Mark static.
1604 (fbsd_nat_add_target): New function.
1605 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
1606 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
1607 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
1608 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
1609 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
1610 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
1612 2015-04-27 Gary Benson <gbenson@redhat.com>
1614 * objfiles.c (allocate_objfile): Do not attempt to expand name
1615 if name is a "target:" filename.
1616 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
1617 to load auto-load scripts for objfiles with "target:" filenames.
1619 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1621 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
1622 (enum s390_vector_abi_kind): New enum.
1623 (struct gdbarch_tdep)<vector_abi>: New field.
1624 (s390_effective_inner_type): Add parameter min_size. Stop
1625 unwrapping if the inner type is smaller than min_size.
1626 (s390_function_arg_float): Adjust call to
1627 s390_effective_inner_type.
1628 (s390_function_arg_vector): New function.
1629 (s390_function_arg_integer): Adjust comment.
1630 (struct s390_arg_state)<vr>: New field.
1631 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
1632 arguments according to vector ABI when appropriate.
1633 (s390_push_dummy_call): Initialize the argument state's field
1634 'vr'. Adjust calls to s390_handle_arg.
1635 (s390_register_return_value): Handle vector return values.
1636 (s390_return_value): Apply the "register" return value convention
1637 to a vector when appropriate.
1638 (s390_gdbarch_init): Initialize tdep->vector_abi.
1639 * NEWS: Announce S390 vector ABI support.
1641 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1643 * s390-linux-tdep.c (s390_return_value_convention): Remove
1644 function. Inline its logic...
1645 (s390_return_value): ...here. Instead, move the handling of the
1646 "register" return value convention...
1647 (s390_register_return_value): ...here. New function.
1649 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1652 (is_float_singleton): Remove function. Move the "singleton" part
1654 (s390_effective_inner_type): ...here. New function.
1655 (is_float_like): Remove function. Inline its logic...
1656 (s390_function_arg_float): ...here.
1657 (is_pointer_like, is_integer_like, is_struct_like): Remove
1658 functions. Inline their logic...
1659 (s390_function_arg_integer): ...here.
1660 (s390_function_arg_pass_by_reference): Remove function.
1661 (extend_simple_arg): Remove function.
1662 (alignment_of): Remove function.
1663 (struct s390_arg_state): New structure.
1664 (s390_handle_arg): New function.
1665 (s390_push_dummy_call): Move parameter placement logic to the new
1666 function s390_handle_arg. Call it for calculating the stack area
1667 sizes first, and again for actually writing the parameters.
1669 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1671 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
1672 false if the argument is zero.
1674 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
1676 * ada-lang.c (template_to_static_fixed_type): Return input type
1677 when it is already fixed. Cache the input type itself when not
1678 creating a static fixed copy. Make it explicit that we never
1679 molestate the input type.
1680 * gdbtypes.c (resolve_dynamic_struct): Reset the
1681 TYPE_TARGET_TYPE field for resolved copies.
1683 2015-04-27 Joel Brobecker <brobecker@adacore.com>
1685 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
1686 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
1687 (template_to_static_fixed_type): Call ada_check_typedef only
1690 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
1692 * cli/cli-dump.c (srec_dump_command): Add internationalization
1694 (ihex_dump_command): Likewise.
1695 (tekhex_dump_command): Likewise.
1696 (binary_dump_command): Likewise.
1697 (binary_append_command): Likewise.
1699 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
1701 * cli/cli-dump.c (verilog_cmdlist): New variable.
1702 (dump_verilog_memory): New function.
1703 (dump_verilog_value): New function.
1704 (verilog_dump_command): New function.
1705 (_initialize_cli_dump): Add new commands to support verilog dump
1707 * NEWS: Add entry for "dump verilog".
1709 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
1711 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
1712 descriptive type when there is none.
1714 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
1716 * tui/tui-win.c (tui_async_resize_screen): Call
1717 rl_resize_terminal().
1719 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
1721 * windows-nat.c (handle_output_debug_string): Don't change
1722 current_event.dwThreadId.
1723 (get_windows_debug_event): Use thread_id, rather than relying on
1724 current_event.dwThreadId being changed.
1726 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
1728 * windows-nat.c (windows_continue): Report an error if
1729 ContinueDebugEvent() fails.
1731 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1733 * windows-nat.c (windows_resume): Fix misspelling in debug output.
1735 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1737 * windows-nat.c (get_windows_debug_event): Replace retval with
1738 thread_id throughout. Update stale comment.
1740 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1742 * windows-nat.c (get_windows_debug_event): Don't use ternary
1743 conditional operator.
1745 2015-04-21 Pierre Muller <muller@sourceware.org>
1748 p-exp.y (yylex): Reorganize code to return the matched pattern
1749 for a field of this.
1751 2015-04-21 Gary Benson <gbenson@redhat.com>
1753 * common/fileio.h (fileio_to_host_openflags): New declaration.
1754 * common/fileio.c (fcntl.h): New include.
1755 (fileio_to_host_openflags): New function, factored out from...
1756 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
1759 2015-04-21 Kevin Buettner <kevinb@redhat.com>
1761 * rl78-tdep.c (RL78_SP_ADDR): Define.
1762 (opc_reg_to_gdb_regnum): New static function.
1763 (rl78_analyze_prologue): Recognize instructions forming slightly
1764 more interesting prologues.
1766 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
1769 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1770 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1771 TYPE_CODE_REF types so that they are not considered as dynamic
1772 depending on the referenced type.
1773 (resolve_dynamic_type_internal): Likewise.
1775 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
1778 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1779 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1780 "top_level" parameter.
1781 (resolve_dynamic_type_internal): Remove the unused "top_level"
1782 parameter. Update call to is_dynamic_type_internal.
1783 (is_dynamic_type): Update call to is_dynamic_type_internal.
1784 (resolve_dynamic_range): Update call to
1785 resolve_dynamic_type_internal.
1786 (resolve_dynamic_union): Likewise.
1787 (resolve_dynamic_struct): Likewise.
1788 (resolve_dynamic_type): Likewise.
1790 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
1792 * breakpoint.c (update_dprintf_command_list): Remove duplicated
1795 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
1797 * reply_mig_hack.awk: Robustify parsing.
1799 * reply_mig_hack.awk: Don't bother to declare an intermediate
1800 function pointer variable.
1802 2015-04-17 Doug Evans <dje@google.com>
1804 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
1805 to "exec_displacement" to avoid confusion with inner use of the name.
1807 2015-04-17 Pedro Alves <palves@redhat.com>
1809 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
1810 if HW point of TYPE isn't supported.
1812 2015-04-17 Yao Qi <yao.qi@linaro.org>
1813 Pedro Alves <palves@redhat.com>
1815 * target.h (target_can_use_hardware_watchpoint): Update comments.
1816 Remove trailing ";".
1818 2015-04-17 Gary Benson <gbenson@redhat.com>
1820 * remote.c (remote_add_inferior): New argument try_open_exec.
1821 If nonzero, attempt to open the inferior's executable file as
1822 the main executable if no main executable is open already.
1823 All callers updated.
1824 * NEWS: Mention that GDB now supports automatic location and
1825 retrieval of executable + files from remote targets.
1827 2015-04-17 Gary Benson <gbenson@redhat.com>
1829 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
1830 * remote.c (PACKET_qXfer_exec_file): Likewise.
1831 (remote_protocol_features): Register the
1832 "qXfer:exec-file:read" feature.
1833 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
1834 (remote_pid_to_exec_file): New function.
1835 (init_remote_ops): Initialize to_pid_to_exec_file.
1836 (_initialize_remote): Register new "set/show remote
1837 pid-to-exec-file-packet" command.
1838 * NEWS: Announce new qXfer:exec-file:read packet.
1840 2015-04-17 Gary Benson <gbenson@redhat.com>
1842 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
1844 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
1845 New function, factored out from...
1846 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
1848 2015-04-17 Gary Benson <gbenson@redhat.com>
1850 * exec.c (solist.h): New include.
1851 (exec_file_locate_attach): Prefix absolute executable
1852 paths with gdb_sysroot if set.
1853 * NEWS: Mention that executable paths may be prepended
1856 2015-04-17 Gary Benson <gbenson@redhat.com>
1858 * solist.h (exec_file_find): New declaration.
1859 * solib.c (solib_find_1): New function, factored out from...
1860 (solib_find): ...here.
1861 (exec_file_find): New function.
1863 2015-04-17 Gary Benson <gbenson@redhat.com>
1865 * gdbcore.h (exec_file_locate_attach): New declaration.
1866 * exec.c (exec_file_locate_attach): New function, factored
1868 * infcmd.c (attach_command_post_wait): ...here.
1870 2015-04-17 Mike Frysinger <vapier@gentoo.org>
1872 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
1874 2015-04-16 Yao Qi <yao.qi@linaro.org>
1876 * infrun.c (maybe_software_singlestep): Declare.
1877 (displaced_step_fixup): Call maybe_software_singlestep.
1879 2015-04-15 Doug Evans <dje@google.com>
1881 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
1883 2015-04-15 Doug Evans <dje@google.com>
1885 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
1887 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
1889 * python/lib/gdb/command/unwinders.py: Add parentheses.
1891 2015-04-15 Yao Qi <yao.qi@linaro.org>
1893 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
1895 2015-04-15 Yao Qi <yao.qi@linaro.org>
1897 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
1899 2015-04-15 Yao Qi <yao.qi@linaro.org>
1901 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
1902 dsc->insn_size instead of 4.
1904 2015-04-14 Gary Benson <gbenson@redhat.com>
1906 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
1907 * minidebug.c (lzma_stat): Likewise.
1908 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
1909 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
1911 2015-04-13 Stan Shebs <stanshebs@google.com>
1913 * MAINTAINERS: Update my email address.
1915 2015-04-13 John Baldwin <jhb@FreeBSD.org>
1917 * amd64-tdep.c (amd64_target_description): New function.
1918 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
1919 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
1920 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1921 x86 extended save area.
1922 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1923 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
1924 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
1925 (_initialize_amd64fbsd_nat): Set "to_read_description" to
1926 "amd64fbsd_read_description".
1927 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
1928 (amd64fbsd_supply_xstateregset): New function.
1929 (amd64fbsd_collect_xstateregset): New function.
1930 Add "amd64fbsd_xstateregset".
1931 (amd64fbsd_iterate_over_regset_sections): New function.
1932 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
1933 "I386_FBSD_XSAVE_XCR0_OFFSET".
1934 Add "iterate_over_regset_sections" gdbarch method.
1935 Add "core_read_description" gdbarch method.
1936 * i386-tdep.c (i386_target_description): New function.
1937 * i386-tdep.h: Export i386_target_description and tdesc_i386.
1938 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
1939 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1940 x86 extended save area.
1941 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1942 * i386bsd-nat.h: Export i386bsd_xsave_len.
1943 * i386fbsd-nat.c (i386fbsd_read_description): New function.
1944 (_initialize_i386fbsd_nat): Set "to_read_description" to
1945 "i386fbsd_read_description".
1946 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
1947 (i386fbsd_core_read_description): New function.
1948 (i386fbsd_supply_xstateregset): New function.
1949 (i386fbsd_collect_xstateregset): New function.
1950 Add "i386fbsd_xstateregset".
1951 (i386fbsd_iterate_over_regset_sections): New function.
1952 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
1953 "I386_FBSD_XSAVE_XCR0_OFFSET".
1954 Add "iterate_over_regset_sections" gdbarch method.
1955 Add "core_read_description" gdbarch method.
1956 * i386fbsd-tdep.h: New file.
1958 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1960 * NEWS (Changes since GDB 7.9): Add removed -xdb.
1961 * breakpoint.c (command_line_is_silent): Remove xdb_commands
1963 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
1965 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
1967 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
1969 * defs.h (xdb_commands): Remove declaration.
1970 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
1971 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
1972 * infcmd.c (run_no_args_command, go_command): Remove.
1973 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
1974 * infrun.c (xdb_handle_command): Remove.
1975 (_initialize_infrun): Remove xdb_commands for lz and z.
1976 * main.c (xdb_commands): Remove variable.
1977 (captured_main): Remove "xdb" from long_options.
1978 (print_gdb_help): Remove --xdb from help.
1979 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
1980 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
1981 * stack.c (backtrace_full_command, args_plus_locals_info)
1982 (current_frame_command): Remove.
1983 (_initialize_stack): Remove xdb_commands for t, T and l.
1984 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
1985 * thread.c (_initialize_thread): Remove xdb_commands condition.
1986 * tui/tui-layout.c (tui_toggle_layout_command)
1987 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
1988 (_initialize_tui_layout): Remove xdb_commands for td and ts.
1989 * tui/tui-regs.c (tui_scroll_regs_forward_command)
1990 (tui_scroll_regs_backward_command): Remove.
1991 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
1992 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
1993 (_initialize_tui_win): Remove xdb_commands for U and w.
1994 * utils.c (pagination_on_command, pagination_off_command): Remove.
1995 (initialize_utils): Remove xdb_commands for am and sm.
1997 2015-04-10 Pedro Alves <palves@redhat.com>
1999 * infrun.c (displaced_step_fixup): Switch to the event ptid
2000 earlier. If the thread stopped for a watchpoint and the
2001 target/arch has non-continuable watchpoints, cancel the displaced
2003 (resume): Don't start a displaced step if in-line step-over info
2006 2015-04-10 Pedro Alves <palves@redhat.com>
2008 * infrun.c (displaced_step_in_progress): New function.
2009 (do_target_resume): Advise target to report all signals if
2012 2015-04-10 Pedro Alves <palves@redhat.com>
2015 * infrun.c (process_event_stop_test): Don't assume a step-resume
2016 is set if tp->stepped_breakpoint is true.
2018 2015-04-10 Yao Qi <yao.qi@linaro.org>
2020 * arm-tdep.c (install_alu_reg): Update comment.
2021 (thumb_copy_alu_reg): Remove local variable rn. Update
2022 debugging message. Use r2 instead of r1 in the modified
2025 2015-04-10 Pedro Alves <palves@redhat.com>
2028 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
2029 linux_displaced_step_location as gdbarch_displaced_step_location
2031 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
2032 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
2033 * linux-tdep.c (linux_displaced_step_location): New function,
2034 based on ppc_linux_displaced_step_location.
2035 * linux-tdep.h (linux_displaced_step_location): New declaration.
2036 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
2037 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
2039 (ppc_linux_init_abi): Install linux_displaced_step_location as
2040 gdbarch_displaced_step_location hook, even without Cell/B.E..
2041 (_initialize_ppc_linux_tdep): Don't install
2042 ppc_linux_inferior_created as inferior_created observer.
2043 * s390-linux-tdep.c (s390_gdbarch_init): Install
2044 linux_displaced_step_location as gdbarch_displaced_step_location
2047 2015-04-09 Gary Benson <gbenson@redhat.com>
2049 * common/common-remote-fileio.h: Rename to...
2050 * common/fileio.h: ...this. Update all references.
2051 (remote_fileio_to_fio_error): Rename to...
2052 (host_to_fileio_error): ...this.
2053 (remote_fileio_to_be): Rename to...
2054 (host_to_bigendian): ...this. Update all callers.
2055 (remote_fileio_to_fio_uint): Rename to...
2056 (host_to_fileio_uint): ...this. Update all callers.
2057 (remote_fileio_to_fio_time): Rename to...
2058 (host_to_fileio_time): ...this. Update all callers.
2059 (remote_fileio_to_fio_stat): Rename to...
2060 (host_to_fileio_stat): ...this.
2061 Update all references.
2062 * common/common-remote-fileio.c: Rename to...
2063 * common/fileio.c: ...this. Update all references.
2064 (remote_fileio_to_fio_error): Rename to...
2065 (host_to_fileio_error): ...this. Update all callers.
2066 (remote_fileio_mode_to_target): Rename to...
2067 (fileio_mode_pack): ...this. Update all callers.
2068 (remote_fileio_to_fio_mode): Rename to...
2069 (host_to_fileio_mode): ...this. Update all callers.
2070 (remote_fileio_to_fio_ulong): Rename to...
2071 (host_to_fileio_ulong): ...this. Update all callers.
2072 (remote_fileio_to_fio_stat): Rename to...
2073 (host_to_fileio_stat): ...this. Update all callers.
2075 2015-04-09 Andy Wingo <wingo@igalia.com>
2077 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
2078 (frame_functions): Bind gdbscm_frame_read_register to
2079 frame-read-register.
2080 * guile/lib/gdb.scm (frame-read-register): Export.
2082 2015-04-09 Gary Benson <gbenson@redhat.com>
2084 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
2086 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
2087 New function, factored out the named functions below.
2088 * inf-child.c (gdb/fileio.h): Remove include.
2089 (common-remote-fileio.h): New include.
2090 (inf_child_errno_to_fileio_error): Remove function. Update
2091 all callers to use remote_fileio_to_fio_error.
2092 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
2094 2015-04-09 Andy Wingo <wingo@igalia.com>
2096 * MAINTAINERS (Write After Approval): Add Andy Wingo.
2098 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
2100 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
2101 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
2102 * configure: Regenerated.
2104 2015-04-09 Pedro Alves <palves@redhat.com>
2106 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
2107 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
2108 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
2109 * gnulib/import/Makefile.am: Update.
2110 * gnulib/import/Makefile.in: Update.
2111 * gnulib/import/m4/gnulib-cache.m4: Update.
2112 * gnulib/import/m4/gnulib-comp.m4: Update.
2113 * gnulib/import/m4/strtok_r.m4: New file.
2114 * gnulib/import/strtok_r.c: New file.
2116 2015-04-09 Pedro Alves <palves@redhat.com>
2118 * gnulib/update-gnulib.sh (aclocal version check): Filter out
2119 "called too early to check prototype".
2121 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
2124 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
2125 use a caching mechanism. Adjust comments and code to reflect
2126 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
2127 (cmdpy_completer_handle_brkchars): Adjust call to
2128 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
2129 (cmdpy_completer): Likewise.
2131 2015-04-08 Yao Qi <yao.qi@linaro.org>
2133 * spu-tdep.c (spu_gdbarch_init): Don't call
2134 set_gdbarch_cannot_step_breakpoint.
2136 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
2138 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
2140 2015-04-07 Pedro Alves <palves@redhat.com>
2142 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
2143 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
2144 (delete_exited_threads): New declaration.
2145 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
2146 * linux-nat.c (linux_nat_update_thread_list): New function.
2147 (linux_nat_add_target): Install it.
2148 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
2149 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
2150 (delete_exited_threads): New function.
2152 2015-04-07 Pedro Alves <pedro@codesourcery.com>
2154 * infrun.c (resume) <displaced stepping debug output>: Get the
2155 leader thread's regcache, not resume_ptid's.
2157 2015-04-06 Doug Evans <xdje42@gmail.com>
2159 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
2161 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
2162 Include symbol domain in debugging output.
2164 2015-04-06 Pedro Alves <palves@redhat.com>
2165 Bernd Edlinger <bernd.edlinger@hotmail.de>
2167 * configure.ac: Remove the mingw32-specific stub-termcap.o
2168 fallback, and instead fallback to the stub termcap on all hosts.
2169 * configure: Regenerate.
2170 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
2173 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2175 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
2176 "top_level" parameter.
2177 (resolve_dynamic_type_internal): Remove the unused "top_level"
2178 parameter. Update call to is_dynamic_type_internal.
2179 (is_dynamic_type): Update call to is_dynamic_type_internal.
2180 (resolve_dynamic_range): Update call to
2181 resolve_dynamic_type_internal.
2182 (resolve_dynamic_union): Likewise.
2183 (resolve_dynamic_struct): Likewise.
2184 (resolve_dynamic_type): Likewise.
2186 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2188 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
2189 TYPE_CODE_REF types so that they are not considered as dynamic
2190 depending on the referenced type.
2191 (resolve_dynamic_type_internal): Likewise.
2193 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
2195 * Makefile.in (top_srcdir): New.
2196 * configure: Regenerated.
2198 2015-04-02 Gary Benson <gbenson@redhat.com>
2200 * NEWS: Announce the new default sysroot of "target:".
2202 2015-04-02 Gary Benson <gbenson@redhat.com>
2204 * main.c (captured_main): Set gdb_sysroot to "target:"
2205 if not otherwise set.
2207 2015-04-02 Gary Benson <gbenson@redhat.com>
2209 * exec.c (exec_file_attach): Support "target:" filenames.
2211 2015-04-02 Gary Benson <gbenson@redhat.com>
2213 * solib.c (solib_find): Strip "target:" prefix from sysroot
2214 if accessing local files.
2216 2015-04-02 Gary Benson <gbenson@redhat.com>
2218 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
2219 checks and error messages.
2221 2015-04-02 Gary Benson <gbenson@redhat.com>
2223 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
2224 (remote_filename_p): Remove declaration.
2225 (remote_bfd_open): Likewise.
2226 * remote.c (remote_bfd_iovec_open): Remove function.
2227 (remote_bfd_iovec_close): Likewise.
2228 (remote_bfd_iovec_pread): Likewise.
2229 (remote_bfd_iovec_stat): Likewise.
2230 (remote_filename_p): Likewise.
2231 (remote_bfd_open): Likewise.
2232 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
2233 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
2234 (gdb_bfd_open_maybe_remote): Remove function.
2235 (symfile_bfd_open): Replace remote filename check with
2236 target filename check.
2237 (reread_symbols): Use gdb_bfd_open.
2238 * build-id.c (gdbcore.h): New include.
2239 (build_id_to_debug_bfd): Use gdb_bfd_open.
2240 * infcmd.c (attach_command_post_wait): Remove remote filename
2242 * solib.c (solib_find): Replace remote-specific handling with
2243 target-specific handling. Update comments where necessary.
2244 (solib_bfd_open): Replace remote-specific handling with
2245 target-specific handling.
2246 (gdb_sysroot_changed): New function.
2247 (_initialize_solib): Call the above when gdb_sysroot changes.
2248 * windows-tdep.c (gdbcore.h): New include.
2249 (windows_xfer_shared_library): Use gdb_bfd_open.
2251 2015-04-02 Gary Benson <gbenson@redhat.com>
2253 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
2254 (is_target_filename): New declaration.
2255 (gdb_bfd_has_target_filename): Likewise.
2256 (gdb_bfd_open): Update documentation comment.
2257 * gdb_bfd.c (target.h): New include.
2258 (gdb/fileio.h): Likewise.
2259 (is_target_filename): New function.
2260 (gdb_bfd_has_target_filename): Likewise.
2261 (fileio_errno_to_host): Likewise.
2262 (gdb_bfd_iovec_fileio_open): Likewise.
2263 (gdb_bfd_iovec_fileio_pread): Likewise.
2264 (gdb_bfd_iovec_fileio_close): Likewise.
2265 (gdb_bfd_iovec_fileio_fstat): Likewise.
2266 (gdb_bfd_open): Use target fileio to access paths prefixed
2267 with "target:" where necessary.
2269 2015-04-02 Gary Benson <gbenson@redhat.com>
2271 * target.h (struct target_ops) <to_filesystem_is_local>:
2273 (target_filesystem_is_local): New macro.
2274 * target-delegates.c: Regenerate.
2275 * remote.c (remote_filesystem_is_local): New function.
2276 (init_remote_ops): Initialize to_filesystem_is_local.
2278 2015-04-02 Gary Benson <gbenson@redhat.com>
2280 * target.h (struct target_ops) <to_fileio_fstat>: New field.
2281 (target_fileio_fstat): New declaration.
2282 * target.c (target_fileio_fstat): New function.
2283 * inf-child.c (inf_child_fileio_fstat): Likewise.
2284 (inf_child_target): Initialize to_fileio_fstat.
2285 * remote.c (init_remote_ops): Likewise.
2287 2015-04-01 Sasha Smundak <asmundak@google.com>
2289 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
2290 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
2291 (py-unwind.o): New recipe.
2292 * NEWS: mention Python frame unwinding.
2293 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
2294 gdb/unwinder.py and gdb/command/unwinder.py
2295 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
2297 (execute_unwinders): New function.
2298 * python/lib/gdb/command/unwinders.py: New file.
2299 * python/lib/gdb/unwinder.py: New file.
2300 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
2301 (objfpy_dealloc): Decrement frame_unwinders reference count.
2302 (objfpy_initialize): Create frame_unwinders list.
2303 (objfpy_get_frame_unwinders): New function.
2304 (objfpy_set_frame_unwinders): Ditto.
2305 (objfile_getset): Add frame_unwinders attribute to Objfile.
2306 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
2307 (pspy_dealloc): Decrement frame_unwinders reference count.
2308 (pspy_initialize): Create frame_unwinders list.
2309 (pspy_get_frame_unwinders): New function.
2310 (pspy_set_frame_unwinders): Ditto.
2311 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
2312 * python/py-unwind.c: New file.
2313 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
2314 (objpy_get_frame_unwinders): New prototype.
2315 (gdbpy_initialize_unwind): New prototype.
2316 * python/python.c (gdbpy_apply_type_printers): Call
2317 gdbpy_initialize_unwind.
2319 2015-04-01 Pedro Alves <palves@redhat.com>
2321 * infrun.c (resume): Check currently_stepping after clearing
2322 stepped_breakpoint, not before.
2324 2015-04-01 Pedro Alves <palves@redhat.com>
2326 * infrun.c (print_target_wait_results): Print all the ptid
2329 2015-04-01 Pedro Alves <palves@redhat.com>
2331 * infrun.c (keep_going): Also discard cleanups if inserting
2334 2015-04-01 Pedro Alves <palves@redhat.com>
2336 * infrun.c (wait_for_inferior): Install the
2337 finish_thread_state_cleanup cleanup across the whole function, not
2338 just around handle_inferior_event.
2340 2015-04-01 Pedro Alves <palves@redhat.com>
2342 * infrun.c (resume) <step past permanent breakpoint>: Use
2345 2015-04-01 Pedro Alves <palves@redhat.com>
2347 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
2349 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
2351 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
2353 2015-04-01 Pedro Alves <palves@redhat.com>
2355 * linux-thread-db.c (record_thread): Readd the thread to gdb's
2356 list if it was marked exited.
2358 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
2360 * configure: Regenerated.
2362 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
2363 Jan Kratochvil <jan.kratochvil@redhat.com>
2364 Oleg Nesterov <oleg@redhat.com>
2367 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
2368 New enum identifying the various options of the coredump_filter
2370 (struct smaps_vmflags): New struct.
2371 (use_coredump_filter): New variable.
2372 (decode_vmflags): New function.
2373 (mapping_is_anonymous_p): Likewise.
2374 (dump_mapping_p): Likewise.
2375 (linux_find_memory_regions_full): New variables
2376 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
2377 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
2378 parsing of its information. Implement memory mapping filtering
2379 based on its contents.
2380 (show_use_coredump_filter): New function.
2381 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
2382 * NEWS: Mention the possibility of using the
2383 '/proc/PID/coredump_filter' file when generating a corefile.
2384 Mention new command 'set use-coredump-filter'.
2386 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
2388 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
2389 read_memory_unsigned_integer.
2391 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
2393 * Makefile.in (ZLIB): New.
2394 (ZLIBINC): Likewise.
2395 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
2396 (CLIBS): Add $(ZLIB).
2397 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
2399 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
2400 * top.c (print_gdb_configuration): Remove --with-zlib and
2402 * config.in: Regenerated.
2403 * configure: Likewise.
2405 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
2407 * NEWS: Mention info os cpus support.
2408 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
2409 (struct osdata_type): Add cpus entry, reorder the entries in
2412 2015-03-31 Matthias Klose <doko@ubuntu.com>
2414 * compile/compile.c (compile_to_object): Allow triplets with or
2417 2015-03-30 Doug Evans <dje@google.com>
2420 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
2421 klass in VAR_DOMAIN.
2423 2015-03-30 Gary Benson <gbenson@redhat.com>
2425 * remote.c (remote_mourn_1): Remove function. Update all callers
2426 to use remote_mourn.
2427 (extended_remote_mourn_1): Remove function. Update all callers
2428 to use extended_remote_mourn.
2429 (extended_remote_attach_1): Remove function. Update all callers
2430 to use extended_remote_attach.
2432 2015-03-28 James Bowman <james.bowman@ftdichip.com>
2434 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
2435 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
2436 (ALLDEPFILES): Add ft32-tdep.c.
2437 * configure.tgt: Add FT32 entry.
2438 * ft32-tdep.c: New file, FT32 target-dependent code.
2439 * ft32-tdep.h: New file, FT32 target-dependent code.
2441 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
2444 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2446 * printcmd.c (print_command_1): Move expr variable scope.
2448 2015-03-27 Joel Brobecker <brobecker@adacore.com>
2450 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
2452 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
2454 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
2457 2015-03-26 Joel Brobecker <brobecker@adacore.com>
2459 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
2460 exception raised while parsing the probe arguments.
2461 Force parsing to be done using the C language parser.
2462 * expression.h (parse_expression_with_language): Declare.
2463 * parse.c (parse_expression_with_language): New function.
2465 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
2467 * MAINTAINERS (Write After Approval): Add "Jon Turney".
2469 2015-03-26 Andy Wingo <wingo@igalia.com>
2472 * dwarf2read.c (struct partial_die_info): Add has_const_value
2474 (add_partial_symbol): Don't punt on symbols that have const_value
2476 (read_partial_die): Detect DW_AT_const_value.
2478 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2481 * printcmd.c (print_command_1): Move expr variable scope.
2483 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2486 * printcmd.c (validate_format): Make the parameter cmdname const.
2488 2015-03-26 Don Breazeal <donb@codesourcery.com>
2490 * remote.c (_initialize_remote): Update comment.
2492 2015-03-26 Pedro Alves <palves@redhat.com>
2493 Jon TURNEY <jon.turney@dronecode.org.uk>
2495 * coffread.c (coff_symfile_read): When constructing the name of an
2496 import stub symbol from import symbol for amd64, only skip the
2497 char after _imp_ if the target is underscored (like i386) and the
2498 char is indeed the target's leading char.
2500 2015-03-25 Pedro Alves <palves@redhat.com>
2502 * target.h <to_async>: Replace 'callback' and 'context' parameters
2503 with boolean 'enable' parameter.
2504 (target_async): Replace CALLBACK and CONTEXT parameters with
2505 boolean ENABLE parameter.
2506 * inf-loop.c (inferior_event_handler): Adjust.
2507 * linux-nat.c (linux_nat_attach, linux_nat_resume)
2508 (linux_nat_resume): Adjust.
2509 (async_client_callback, async_client_context): Delete.
2510 (handle_target_event): Call inferior_event_handler directly.
2511 (linux_nat_async): Replace 'callback' and 'context' parameters
2512 with boolean 'enable' parameter. Adjust. Remove references to
2513 async_client_callback and async_client_context.
2514 (linux_nat_close): Adjust.
2515 * record-btrace.c (record_btrace_async): Replace 'callback' and
2516 'context' parameters with boolean 'enable' parameter. Adjust.
2517 (record_btrace_resume): Adjust.
2518 * record-full.c (record_full_async): Replace 'callback' and
2519 'context' parameters with boolean 'enable' parameter. Adjust.
2520 (record_full_resume, record_full_core_resume): Adjust.
2521 * remote.c (struct remote_state) <async_client_callback,
2522 async_client_context>: Delete fields.
2523 (remote_start_remote, extended_remote_attach_1, remote_resume)
2524 (extended_remote_create_inferior): Adjust.
2525 (remote_async_serial_handler): Call inferior_event_handler
2527 (remote_async): Replace 'callback' and 'context' parameters with
2528 boolean 'enable' parameter. Adjust.
2529 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
2531 * target-delegates.c: Regenerate.
2533 2015-03-25 Gary Benson <gbenson@redhat.com>
2534 Pedro Alves <palves@redhat.com>
2536 * target.c (fileio_ft_t): New typedef, define object vector.
2537 (fileio_fhandles): New static variable.
2538 (is_closed_fileio_fh): New macro.
2539 (lowest_closed_fd): New static variable.
2540 (acquire_fileio_fd): New function.
2541 (release_fileio_fd): Likewise.
2542 (fileio_fd_to_fh): New macro.
2543 (target_fileio_open): Wrap the file descriptor on success.
2544 (target_fileio_pwrite): Updated to use wrapped file descriptor.
2545 (target_fileio_pread): Likewise.
2546 (target_fileio_close): Likewise.
2548 2015-03-24 Pedro Alves <palves@redhat.com>
2550 * thread.c (thread_apply_all_command): Take exited threads into
2553 2015-03-24 Pedro Alves <palves@redhat.com>
2555 * infrun.c (resume, proceed): Mention
2556 switch_back_to_stepped_thread, not switch_back_to_stepping.
2558 2015-03-24 Pedro Alves <palves@redhat.com>
2560 * infrun.c (user_visible_resume_ptid): Rewrite going from
2561 most-locked to unlocked instead of the opposite. Move comment ...
2562 * infrun.h (user_visible_resume_ptid): ... here.
2564 2015-03-24 Pedro Alves <palves@redhat.com>
2566 * linux-nat.c (linux_nat_resume): Output debug logs before trying
2567 to resume the event lwp. Use the lwp's ptid instead of the passed
2568 in (maybe wildcard) ptid.
2569 (stop_wait_callback): Tweak debug log output.
2570 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
2572 (linux_nat_filter_event): In debug output, distinguish a
2573 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
2574 before trying to resume the lwp.
2576 2015-03-24 Joel Brobecker <brobecker@adacore.com>
2578 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
2579 pointer indirection.
2580 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
2581 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
2583 2015-03-24 Joel Brobecker <brobecker@adacore.com>
2585 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
2586 Renames DYN_ATTR_DATA_LOCATION.
2587 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
2588 DYN_ATTR_DATA_LOCATION.
2589 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
2590 instead of DYN_ATTR_DATA_LOCATION.
2592 2015-03-24 Pedro Alves <palves@redhat.com>
2594 * breakpoint.c (until_break_command): Adjust call to proceed.
2595 * gdbthread.h (struct thread_control_state) <stepping_command>:
2597 * infcall.c (run_inferior_call): Adjust call to proceed.
2598 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
2599 Adjust calls to proceed.
2600 (set_step_frame): Set the current thread's step_start_function
2602 (step_once): Adjust calls to proceed.
2603 (jump_command, signal_command, until_next_command)
2604 (finish_backward, finish_forward, proceed_after_attach_callback)
2605 (attach_command_post_wait): Adjust calls to proceed.
2606 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
2607 (do_target_resume): New function, factored out from ...
2608 (resume): ... here. Remove 'step' parameter. Instead, check
2609 currently_stepping to determine whether the thread should be
2611 (proceed): Remove 'step' parameter and don't set the thread's
2612 step_start_function here. Adjust call to 'resume'.
2613 (handle_inferior_event): Adjust calls to 'resume'.
2614 (switch_back_to_stepped_thread): Use do_target_resume instead of
2616 (keep_going): Adjust calls to 'resume'.
2617 * infrun.h (proceed): Remove 'step' parameter.
2619 * windows-nat.c (do_initial_windows_stuff): Adjust call to
2621 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
2623 2015-03-24 Pedro Alves <palves@redhat.com>
2625 * gdbthread.h (struct thread_control_state) <stepping_command>:
2627 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
2628 the thread's stepping_command field.
2629 * infrun.c (resume): Check the thread's stepping_command flag to
2630 determine which threads should be resumed. Rename 'entry_step'
2632 (clear_proceed_status_thread): Clear 'stepping_command'.
2633 (schedlock_applies): Change parameter type to struct thread_info
2635 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
2636 (switch_back_to_stepped_thread): Adjust calls to
2637 'schedlock_applies'.
2638 (_initialize_infrun): Adjust "set scheduler-locking step" help.
2640 2015-03-24 Pedro Alves <palves@redhat.com>
2642 * infrun.c (step_start_function): Delete and ...
2643 * gdbthread.h (struct thread_control_state) <step_start_function>:
2644 ... now a field here.
2645 * infrun.c (clear_proceed_status_thread): Clear the thread's
2646 step_start_function.
2647 (proceed, process_event_stop_test, print_stop_event): Adjust.
2649 2015-03-24 Pedro Alves <palves@redhat.com>
2651 * infrun.c (proceed): No longer handle negative step.
2653 2015-03-24 Gary Benson <gbenson@redhat.com>
2655 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
2656 (x86_linux_prepare_to_resume): Likewise.
2657 * x86-linux-nat.c (x86_linux_new_thread):
2658 Moved to nat/x86-linux.c.
2659 (x86_linux_prepare_to_resume): Likewise.
2660 * nat/x86-linux.c (x86_linux_new_thread): New function.
2661 (x86_linux_prepare_to_resume): Likewise.
2663 2015-03-24 Gary Benson <gbenson@redhat.com>
2665 * nat/x86-linux-dregs.h: New file.
2666 * nat/x86-linux-dregs.c: Likewise.
2667 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
2668 (x86-linux-dregs.o): New rule.
2669 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
2670 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2671 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
2672 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
2673 (x86_linux_dr_get): Likewise.
2674 (x86_linux_dr_set): Likewise.
2675 (x86_linux_dr_get_addr): Likewise.
2676 (x86_linux_dr_get_control): Likewise.
2677 (x86_linux_dr_get_status): Likewise.
2678 (update_debug_registers_callback): Likewise.
2679 (x86_linux_dr_set_control): Likewise.
2680 (x86_linux_dr_set_addr): Likewise.
2681 (x86_linux_update_debug_registers): Likewise.
2683 2015-03-24 Gary Benson <gbenson@redhat.com>
2685 * x86-linux-nat.c (x86_linux_update_debug_registers):
2686 New function, factored out from...
2687 (x86_linux_prepare_to_resume): ...this.
2689 2015-03-24 Gary Benson <gbenson@redhat.com>
2691 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
2692 (x86_linux_dr_set): Likewise.
2693 (x86_linux_dr_get_addr): Likewise.
2694 (x86_linux_dr_get_control): Likewise.
2695 (x86_linux_dr_get_status): Likewise.
2696 (update_debug_registers_callback): Likewise.
2697 (x86_linux_dr_set_control): Likewise.
2698 (x86_linux_dr_set_addr): Likewise.
2699 (x86_linux_prepare_to_resume): Likewise.
2700 (x86_linux_new_thread): Likewise.
2702 2015-03-24 Gary Benson <gbenson@redhat.com>
2704 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
2705 (x86_linux_new_thread): Rename argument.
2707 2015-03-24 Gary Benson <gbenson@redhat.com>
2709 * nat/x86-linux.h: New file.
2710 * nat/x86-linux.c: Likewise.
2711 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
2712 (x86-linux.o): New rule.
2713 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
2714 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2715 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
2716 (lwp_set_arch_private_info): New declaration.
2717 (lwp_arch_private_info): Likewise.
2718 * linux-nat.c (lwp_set_arch_private_info): New function.
2719 (lwp_arch_private_info): Likewise.
2720 * x86-linux-nat.c: Include nat/x86-linux.h.
2721 (arch_lwp_info): Removed structure.
2722 (update_debug_registers_callback):
2723 Use lwp_set_debug_registers_changed.
2724 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
2725 and lwp_set_debug_registers_changed.
2726 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2728 2015-03-24 Gary Benson <gbenson@redhat.com>
2730 * nat/linux-nat.h (ptid_of_lwp): New declaration.
2731 (lwp_is_stopped): Likewise.
2732 (lwp_stop_reason): Likewise.
2733 * linux-nat.c (ptid_of_lwp): New function.
2734 (lwp_is_stopped): Likewise.
2735 (lwp_is_stopped_by_watchpoint): Likewise.
2736 * x86-linux-nat.c (update_debug_registers_callback):
2738 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
2741 2015-03-24 Gary Benson <gbenson@redhat.com>
2743 * linux-nat.h (linux_stop_lwp): Move declaration to...
2744 * nat/linux-nat.h (linux_stop_lwp): New declaration.
2746 2015-03-24 Gary Benson <gbenson@redhat.com>
2748 * linux-nat.h: Include nat/linux-nat.h.
2749 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
2750 * nat/linux-nat.h (struct lwp_info): New forward declaration.
2751 (iterate_over_lwps_ftype): New typedef.
2752 (iterate_over_lwps): New declaration.
2753 * linux-nat.h (iterate_over_lwps): Update comment. Use
2754 iterate_over_lwps_ftype. Update callback return value check.
2756 2015-03-24 Gary Benson <gbenson@redhat.com>
2758 * x86-nat.h (x86_debug_reg_state): Move declaration to...
2759 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
2761 2015-03-24 Gary Benson <gbenson@redhat.com>
2763 * nat/linux-nat.h (current_lwp_ptid): New declaration.
2764 * linux-nat.c (current_lwp_ptid): New function.
2765 * x86-linux-nat.c: Include nat/linux-nat.h.
2766 (x86_linux_dr_get_addr): Use current_lwp_ptid.
2767 (x86_linux_dr_get_control): Likewise.
2768 (x86_linux_dr_get_status): Likewise.
2769 (x86_linux_dr_set_control): Likewise.
2770 (x86_linux_dr_set_addr): Likewise.
2772 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
2774 PR breakpoints/16466
2775 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
2777 2015-03-23 Joel Brobecker <brobecker@adacore.com>
2779 * ser-mingw.c (ser_windows_setparity): Fix indentation.
2780 * ser-unix.c (hardwire_setparity): Likewise.
2782 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
2784 * NEWS: Mention set/show serial parity command.
2785 * monitor.c (monitor_open): Call serial_setparity.
2786 * remote.c (remote_open_1): Likewise.
2787 * ser-base.c (ser_base_serparity): New function.
2788 * ser-base.h (ser_base_setparity): Add declaration.
2789 * ser-go32.c (dos_ops): Set "setparity" field.
2790 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
2792 (ser_windows_setparity): New function.
2793 (hardwire_ops): Add ser_windows_setparity.
2794 (tty_ops): Add NULL for setparity field.
2795 (pipe_ops): Add ser_base_setparity.
2796 (tcp_ops): Likewise.
2797 * ser-pipe.c (pipe_ops): Likewise.
2798 * ser-tcp.c (tcp_ops): Likewise.
2799 * ser-unix.c (hardwire_setparity): Add declaration.
2800 (hardwire_raw): Don't reset PARENB flag.
2801 (hardwire_setparity): New function.
2802 (hardwire_ops): Add hardwire_setparity.
2803 * serial.c (serial_setparity): New function.
2804 (serial_parity): New global.
2805 (parity_none, parity_odd, parity_even, parity_enums, parity):
2807 (set_parity): New function.
2808 (_initialize_serial): Add set/show serial parity commands.
2809 * serial.h (GDBPARITY_NONE): Define.
2810 (GDBPARITY_ODD): Define.
2811 (GDBPARITY_EVEN): Define.
2812 (serial_setparity) Add declaration.
2813 (struct serial_ops): Add setparity field.
2814 * target.h (serial_parity): Add declaration.
2816 2015-03-23 Keith Seitz <keiths@redhat.com>
2818 * linespec.c (linespec_lexer_lex_keyword): Update comment.
2820 2015-03-23 Keith Seitz <keiths@redhat.com>
2822 * breakpoint.c (parse_breakpoint_sals): Use
2823 linespec_lexer_lex_keyword to ascertain if the user specified
2825 * linespec.c [IF_KEYWORD_INDEX]: Define.
2826 (linespec_lexer_lex_keyword): Export.
2827 (struct ls_parser) <keyword_ok>: Remove.
2828 A keyword is only a keyword if not followed by another keyword.
2829 (linespec_lexer_lex_one): Remove keyword_ok handling.
2830 Add comment explaining why the parsing stream is not advanced
2831 when a keyword is seen.
2832 (parse_linespec): Remove parser->keyword_ok.
2833 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
2835 2015-03-23 Keith Seitz <keiths@redhat.com>
2838 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
2839 if we find a static method with DW_AT_vtable_elem_location.
2841 2015-03-21 Eli Zaretskii <eliz@gnu.org>
2843 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
2844 before the second loop, to avoid undefined behavior. Reported by
2845 Anton Blanchard <anton@samba.org>.
2847 2015-03-20 Keven Boell <keven.boell@intel.com>
2849 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
2850 data_location usage to linked list.
2851 (resolve_dynamic_type_internal): Adapt data_location to
2853 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
2854 (copy_type_recursive, copy_type): Add copy of linked list.
2855 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
2856 (struct dynamic_prop_list): New struct.
2857 * dwarf2read.c (set_die_type): Set data_location data.
2859 2015-03-20 Pedro Alves <palves@redhat.com>
2861 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
2862 inner block and make it const.
2863 * machoread.c (get_archive_prefix_len): Make "lparen" const.
2865 2015-03-20 Pedro Alves <palves@redhat.com>
2867 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
2868 * breakpoint.h (set_breakpoint_condition): Update declaration.
2870 2015-03-20 Pedro Alves <palves@redhat.com>
2872 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
2874 2015-03-20 Pedro Alves <palves@redhat.com>
2876 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
2878 2015-03-20 Pedro Alves <palves@redhat.com>
2880 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
2882 2015-03-20 Pedro Alves <palves@redhat.com>
2884 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
2885 (nto_init_solib_absolute_prefix): Likewise.
2887 2015-03-20 Pedro Alves <palves@redhat.com>
2889 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
2890 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
2892 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
2894 * config/djgpp/README: Remove gdb.hp.
2896 2015-03-20 Yao Qi <yao.qi@linaro.org>
2898 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
2899 set_gdbarch_cannot_step_breakpoint.
2901 2015-03-19 Pedro Alves <palves@redhat.com>
2903 * linux-nat.c (linux_resume_one_lwp): Rename to ...
2904 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
2905 instead call perror_with_name.
2906 (check_ptrace_stopped_lwp_gone): New function.
2907 (linux_resume_one_lwp): Reimplement as wrapper around
2908 linux_resume_one_lwp_throw that swallows errors if the LWP is
2910 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
2911 swallows errors if the LWP is gone. Use
2912 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
2914 2015-03-19 Pedro Alves <palves@redhat.com>
2916 * linux-nat.c (status_callback): Return early if the LWP has no
2919 2015-03-19 Pedro Alves <palves@redhat.com>
2921 * linux-nat.c (select_event_lwp_callback): Update comment to no
2922 longer mention SIGTRAP.
2924 2015-03-18 Tristan Gingold <gingold@adacore.com>
2926 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
2927 redirection code to ...
2928 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
2929 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
2931 2015-03-18 Gary Benson <gbenson@redhat.com>
2933 (remote_protocol_features): Remove the "vFile:fstat" feature.
2934 (remote_hostio_fstat): Probe for "vFile:fstat" support.
2936 2015-03-11 Yao Qi <yao.qi@linaro.org>
2939 * aarch64-linux-tdep.c: Include xml-syscall.h
2940 (aarch64_linux_get_syscall_number): New function.
2941 (aarch64_linux_init_abi): Call
2942 set_gdbarch_get_syscall_number.
2943 * syscalls/aarch64-linux.xml: New file.
2945 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
2947 * ser-base.h (ser_base_setstopbits): Change second argument name
2948 from "rate" to "num".
2950 2015-03-17 Gary Benson <gbenson@redhat.com>
2951 Luke Allardyce <lukeallardyce@gmail.com>
2954 * common/common-remote-fileio.h (sys/stat.h): New include.
2955 (stuct stat): Remove forward declaration.
2957 2015-03-16 John Baldwin <jhb@FreeBSD.org>
2959 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
2960 before writing core register notes.
2962 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
2963 Pedro Alves <palves@redhat.com>
2965 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
2966 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
2967 (tgoto): Wrap with extern "C".
2969 2015-03-16 Pedro Alves <palves@redhat.com>
2970 Yuanhui Zhang <asmwarrior@gmail.com>
2972 * stub-termcap.c (tputs): Change prototype.
2974 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
2975 Pedro Alves <palves@redhat.com>
2977 * windows-nat.c (struct thread_info_struct): Rename to ...
2978 (struct windows_thread_info_struct): ... this.
2979 (thread_info): Rename to ...
2980 (windows_thread_info): ... this.
2983 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2984 Pedro Alves <palves@redhat.com>
2986 * NEWS: New Removed targets and native configurations.
2988 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2991 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
2992 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
2993 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
2994 ia64-hpux-tdep.h, solib-ia64-hpux.h.
2995 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
2996 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
2997 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
2999 * config/ia64/hpux.mh: Remove file.
3000 * config/pa/hpux.mh: Remove file.
3001 * configure: Rebuilt.
3002 * configure.ac (dlgetmodinfo, somread.o): Remove.
3003 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3004 (ia64-*-hpux*): Remove its float format exception.
3005 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3006 * hppa-hpux-nat.c: Remove file.
3007 * hppa-hpux-tdep.c: Remove file.
3008 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
3009 Move them here from hppa-tdep.h
3010 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
3011 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
3012 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
3013 Move them to hppa-tdep.c.
3014 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
3016 * ia64-hpux-nat.c: Remove file.
3017 * ia64-hpux-tdep.c: Remove file.
3018 * ia64-hpux-tdep.h: Remove file.
3019 * inf-ttrace.c: Remove file.
3020 * inf-ttrace.h: Remove file.
3021 * solib-ia64-hpux.c: Remove file.
3022 * solib-ia64-hpux.h: Remove file.
3023 * solib-pa64.c: Remove file.
3024 * solib-pa64.h: Remove file.
3025 * solib-som.c: Remove file.
3026 * solib-som.h: Remove file.
3027 * somread.c: Remove file.
3029 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3031 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
3032 * config.in: Regenerate.
3033 * configure: Regenerate.
3034 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
3036 (fbsd_find_memory_regions): Use kinfo_getvmmap to
3037 enumerate memory regions if present.
3039 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3041 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
3042 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
3044 (i386fbsd_sigtramp_p): Likewise.
3046 2015-03-12 John Baldwin <jhb@FreeBSD.org>
3048 * MAINTAINERS (Write After Approval): Add John Baldwin.
3050 2015-03-12 Gary Benson <gbenson@redhat.com>
3052 * solib.c (_initialize_solib): Make "set/show sysroot" use
3053 add_setshow_optional_filename_cmd so it can be restored to
3054 empty after being set.
3056 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3058 * Makefile.in (SFILES): New source break-catch-syscall.c.
3059 (COMMON_OBS): New object break-catch-syscall.o.
3060 * break-catch-syscall.c: New file.
3061 * breakpoint.c: Remove inclusion of "xml-syscall.h".
3062 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
3063 (struct syscall_catchpoint): Likewise.
3064 (dtor_catch_syscall): Likewise.
3065 (catch_syscall_inferior_data): Likewise.
3066 (struct catch_syscall_inferior_data): Likewise.
3067 (get_catch_syscall_inferior_data): Likewise.
3068 (catch_syscall_inferior_data_cleanup): Likewise.
3069 (insert_catch_syscall): Likewise.
3070 (remove_catch_syscall): Likewise.
3071 (breakpoint_hit_catch_syscall): Likewise.
3072 (print_it_catch_syscall): Likewise.
3073 (print_one_catch_syscall): Likewise.
3074 (print_mention_catch_syscall): Likewise.
3075 (print_recreate_catch_syscall): Likewise.
3076 (catch_syscall_breakpoint_ops): Likewise.
3077 (syscall_catchpoint_p): Likewise.
3078 (create_syscall_event_catchpoint): Likewise.
3079 (catch_syscall_split_args): Likewise.
3080 (catch_syscall_command_1): Likewise.
3081 (is_syscall_catchpoint_enabled): Likewise.
3082 (catch_syscall_enabled): Likewise.
3083 (catching_syscall_number): Likewise.
3084 (catch_syscall_completer): Likewise.
3085 (clear_syscall_counts): Likewise.
3086 (initialize_breakpoint_ops): Move initialization of syscall
3087 catchpoints to break-catch-syscall.c.
3088 (_initialize_breakpoint): Move code related to syscall catchpoints
3089 to break-catch-syscall.c.
3091 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3093 * breakpoint.c (breakpoint_find_if): New function.
3094 * breakpoint.h (breakpoint_find_if): New prototype.
3096 2015-03-11 Gary Benson <gbenson@redhat.com>
3098 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
3099 * remote-fileio.c (remote_fileio_to_host_uint): New function.
3100 (remote_fileio_to_host_ulong): Likewise.
3101 (remote_fileio_to_host_mode): Likewise.
3102 (remote_fileio_to_host_time): Likewise.
3103 (remote_fileio_to_host_stat): Likewise.
3104 * remote.c (PACKET_vFile_fstat): New enum value.
3105 (remote_protocol_features): Register the "vFile:fstat" feature.
3106 (remote_hostio_fstat): New function.
3107 (remote_bfd_iovec_stat): Use the above.
3108 (_initialize_remote): Register new "set/show remote
3109 hostio-fstat-packet" command.
3110 * symfile.c (separate_debug_file_exists): Update comment.
3111 * NEWS: Announce new vFile:fstat packet.
3113 2015-03-11 Gary Benson <gbenson@redhat.com>
3115 * common/common-remote-fileio.h: New file.
3116 * common/common-remote-fileio.c: Likewise.
3117 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
3118 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
3119 (COMMON_OBS): Add common-remote-fileio.o.
3120 (common-remote-fileio.o): New rule.
3121 * remote-fileio.h (common-remote-fileio.h): New include.
3122 * remote-fileio.c (gdb/fileio.h): Do not include.
3123 (remote_fileio_to_be): Moved to common-remote-fileio.h.
3124 (remote_fileio_to_fio_uint): Likewise.
3125 (remote_fileio_to_fio_time): Likewise.
3126 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
3127 (remote_fileio_to_fio_mode): Likewise.
3128 (remote_fileio_to_fio_ulong): Likewise.
3129 (remote_fileio_to_fio_stat): Likewise.
3131 2015-03-11 Andy Wingo <wingo@igalia.com>
3133 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
3134 we were checking the cached type, not the cached dynamic type.
3136 2015-03-11 Andy Wingo <wingo@igalia.com>
3138 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
3139 other strings, as these are on the GC'd heap, and will be
3140 collected along with the smob.
3142 2015-03-11 Andy Wingo <wingo@igalia.com>
3144 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
3145 (objfile_functions): Bind gdbscm_objfile_progspace to
3147 * guile/lib/gdb.scm: Add objfile-progspace to exports.
3149 2015-03-11 Andy Wingo <wingo@igalia.com>
3151 * guile/guile.c (_initialize_guile): Disable automatic
3152 finalization, if Guile offers us that possibility.
3153 * guile/guile.c (call_initialize_gdb_module):
3154 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
3155 finalizers in appropriate places.
3156 * configure.ac (AC_TRY_LIBGUILE): Add a check for
3157 scm_set_automatic_finalization_enabled.
3158 * configure: Regenerated.
3160 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3162 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
3165 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3167 * s390-linux-nat.c (struct arch_lwp_info): New.
3168 (s390_fix_watch_points): Rename to...
3169 (s390_prepare_to_resume): ...this. Skip the PER info update
3170 unless the watch points have changed.
3171 (s390_refresh_per_info, s390_new_thread): New functions.
3172 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
3173 s390_fix_watch_points.
3174 (s390_remove_watchpoint): Likewise.
3175 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
3176 Register s390_prepare_to_resume.
3178 2015-03-09 Pedro Alves <palves@redhat.com>
3181 2015-03-07 Pedro Alves <palves@redhat.com>
3182 * common/gdb_socket.h: New file.
3183 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3185 (net_open): Use union gdb_sockaddr_u.
3187 2015-03-07 Pedro Alves <palves@redhat.com>
3189 * configure.ac (build_warnings): Move -Wmissing-prototypes
3190 -Wdeclaration-after-statement -Wmissing-parameter-type
3191 -Wold-style-declaration -Wold-style-definition to the C-specific
3193 * configure: Regenerate.
3195 2015-03-07 Pedro Alves <palves@redhat.com>
3197 * common/gdb_socket.h: New file.
3198 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3200 (net_open): Use union gdb_sockaddr_u.
3202 2015-03-07 Pedro Alves <palves@redhat.com>
3204 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
3205 (exceptions_state_mc_action_iter)
3206 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3208 [__cplusplus] (try_scope_depth): New global.
3209 [__cplusplus] (exception_try_scope_entry)
3210 (exception_try_scope_exit, gdb_exception_sliced_copy)
3211 (exception_rethrow): New functions.
3212 (throw_exception): In C++ mode, throw
3213 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
3214 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
3215 (throw_it): In C++ mode, use try_scope_depth.
3216 * common/common-exceptions.h [!__cplusplus]
3217 (exceptions_state_mc_action_iter)
3218 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3220 [__cplusplus] (exception_try_scope_entry)
3221 (exception_try_scope_exit, exception_rethrow): Declare.
3222 [__cplusplus] (struct exception_try_scope): New struct.
3223 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
3225 (struct gdb_exception_RETURN_MASK_ALL)
3226 (struct gdb_exception_RETURN_MASK_ERROR)
3227 (struct gdb_exception_RETURN_MASK_QUIT): New types.
3229 2015-03-07 Pedro Alves <palves@redhat.com>
3231 * main.c (handle_command_errors): Remove volatile qualifier from
3234 2015-03-07 Pedro Alves <palves@redhat.com>
3236 * breakpoint.c (save_breakpoints): Adjust to avoid code between
3238 * gdbtypes.c (safe_parse_type): Remove empty line.
3239 (types_deeply_equal):
3240 * guile/scm-frame.c (gdbscm_frame_name):
3241 * linux-thread-db.c (find_new_threads_once):
3242 * python/py-breakpoint.c (bppy_get_commands):
3243 * record-btrace.c (record_btrace_insert_breakpoint)
3244 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
3245 (record_btrace_start_replaying): Adjust to avoid code between TRY
3248 2015-03-07 Pedro Alves <palves@redhat.com>
3250 * common/common-exceptions.c (struct catcher) <exception>: No
3251 longer a pointer to volatile exception. Now an exception value.
3252 <mask>: Delete field.
3253 (exceptions_state_mc_init): Remove all parameters. Adjust.
3254 (exceptions_state_mc): No longer pop the catcher here.
3255 (exceptions_state_mc_catch): New function.
3256 (throw_exception): Adjust.
3257 * common/common-exceptions.h (exceptions_state_mc_init): Remove
3259 (exceptions_state_mc_catch): Declare.
3260 (TRY_CATCH): Rename to ...
3261 (TRY): ... this. Remove EXCEPTION and MASK parameters.
3262 (CATCH, END_CATCH): New.
3263 All callers adjusted.
3265 2015-03-07 Tom Tromey <tromey@redhat.com>
3267 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
3269 2015-03-07 Pedro Alves <palves@redhat.com>
3271 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
3272 (amd64_epilogue_frame_cache): Normal exception handling code.
3273 * break-catch-throw.c (check_status_exception_catchpoint)
3274 (re_set_exception_catchpoint): Ditto.
3275 * cli/cli-interp.c (safe_execute_command):
3276 * cli/cli-script.c (script_from_file): Ditto.
3277 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
3279 * compile/compile-object-run.c (compile_object_run): Ditto.
3280 * cp-abi.c (baseclass_offset): Ditto.
3281 * cp-valprint.c (cp_print_value): Ditto.
3282 * exceptions.c (catch_exceptions_with_msg):
3283 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
3284 * frame.c (get_frame_address_in_block_if_available): Ditto.
3285 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
3286 (i386_sigtramp_frame_cache): Ditto.
3287 * infcmd.c (post_create_inferior): Ditto.
3288 * linespec.c (parse_linespec, find_linespec_symbols):
3289 * p-valprint.c (pascal_object_print_value): Ditto.
3290 * parse.c (parse_expression_for_completion): Ditto.
3291 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
3292 * remote.c (remote_get_noisy_reply): Ditto.
3293 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
3294 * solib-svr4.c (solib_svr4_r_map): Ditto.
3296 2015-03-06 Gary Benson <gbenson@redhat.com>
3298 * common/common-utils.h (startswith): New inline function.
3299 All places where this logic was used updated to use the above.
3301 2015-03-05 Pedro Alves <palves@redhat.com>
3304 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
3305 after reading the breakpoint's shadow memory.
3307 2015-03-05 Mark Kettenis <kettenis@gnu.org>
3309 * hppabsd-nat.c: Remove file.
3310 * hppaobsd-nat.c: New file.
3311 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
3313 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
3316 2015-03-04 Pedro Alves <palves@redhat.com>
3318 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
3319 (target_decr_pc_after_break): Delete declaration.
3320 * target.c (default_target_decr_pc_after_break)
3321 (target_decr_pc_after_break): Delete.
3322 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
3323 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
3324 * linux-thread-db.c (check_event): Likewise.
3325 * infrun.c (adjust_pc_after_break): Likewise.
3326 * darwin-nat.c (cancel_breakpoint): Likewise.
3327 * aix-thread.c (aix_thread_wait): Likewise.
3328 * target-delegates.c: Regenerate.
3330 2015-03-04 Pedro Alves <palves@redhat.com>
3332 * linux-nat.c (save_sigtrap): Check for breakpoints before
3333 checking watchpoints.
3334 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
3335 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
3336 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
3337 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
3338 (linux_nat_stopped_by_sw_breakpoint)
3339 (linux_nat_supports_stopped_by_sw_breakpoint)
3340 (linux_nat_stopped_by_hw_breakpoint)
3341 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
3342 (linux_nat_wait_1): Don't re-increment the PC if relying on
3343 SIGTRAP's siginfo->si_code.
3344 (linux_nat_add_target): Install new target methods.
3345 * linux-thread-db.c (check_event): Don't account for breakpoint PC
3346 offset if the target already adjusted the PC.
3347 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
3348 (GDB_ARCH_TRAP_BRKPT): New.
3349 (TRAP_HWBKPT): Define if not already defined.
3351 2015-03-04 Pedro Alves <palves@redhat.com>
3353 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
3354 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
3356 <stop_reason>: New field.
3357 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
3358 (packet_set_cmd_state): New function.
3359 (remote_protocol_features): Register the "swbreak" and "hwbreak"
3361 (remote_query_supported): If not disabled with the corresponding
3362 "set remote foo-packet" command, report support for the swbreak
3363 and hwbreak features.
3364 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
3366 <stop_reason>: New field.
3367 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
3368 (remote_wait_as): Adjust.
3369 (remote_stopped_by_sw_breakpoint)
3370 (remote_supports_stopped_by_sw_breakpoint)
3371 (remote_stopped_by_hw_breakpoint)
3372 (remote_supports_stopped_by_hw_breakpoint): New functions.
3373 (remote_stopped_by_watchpoint): New function.
3374 (init_remote_ops): Install them.
3375 (_initialize_remote): Register new "set/show remote
3376 swbreak-feature-packet" and "set/show remote
3377 swbreak-feature-packet" commands.
3379 2015-03-04 Pedro Alves <palves@redhat.com>
3381 * btrace.h: Include target/waitstatus.h.
3382 (struct btrace_thread_info) <stop_reason>: New field.
3383 * record-btrace.c (record_btrace_step_thread): Use
3384 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3385 (record_btrace_decr_pc_after_break): Delete.
3386 (record_btrace_stopped_by_sw_breakpoint)
3387 (record_btrace_supports_stopped_by_sw_breakpoint)
3388 (record_btrace_stopped_by_hw_breakpoint)
3389 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
3390 (init_record_btrace_ops): Install them.
3391 * record-full.c (record_full_hw_watchpoint): Delete and replace
3393 (record_full_stop_reason): ... this throughout.
3394 (record_full_exec_insn): Adjust.
3395 (record_full_wait_1): Adjust. No longer re-increment the PC.
3396 (record_full_wait_1): Adjust. Use
3397 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3398 (record_full_stopped_by_watchpoint): Adjust.
3399 (record_full_stopped_by_sw_breakpoint)
3400 (record_full_supports_stopped_by_sw_breakpoint)
3401 (record_full_supports_stopped_by_sw_breakpoint)
3402 (record_full_stopped_by_hw_breakpoint)
3403 (record_full_supports_stopped_by_hw_breakpoint): New functions.
3404 (init_record_full_ops, init_record_full_core_ops): Install them.
3405 * record.c (record_check_stopped_by_breakpoint): New function.
3406 * record.h: Include target/waitstatus.h.
3407 (record_check_stopped_by_breakpoint): New declaration.
3409 2015-03-04 Pedro Alves <palves@redhat.com>
3411 enum lwp_stop_reason -> enum target_stop_reason
3412 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
3413 (linux_nat_stopped_by_watchpoint, status_callback)
3414 (linux_nat_wait_1): Adjust.
3415 * linux-nat.h (enum lwp_stop_reason): Delete.
3416 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
3417 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
3418 * target/waitstatus.h (enum target_stop_reason): New.
3420 2015-03-04 Pedro Alves <palves@redhat.com>
3422 * breakpoint.c (need_moribund_for_location_type): New function.
3423 (bpstat_stop_status): Don't skipping checking moribund locations
3424 of breakpoint types which the target tell caused a stop.
3425 (program_breakpoint_here_p): New function, factored out from ...
3426 (bp_loc_is_permanent): ... this.
3427 (update_global_location_list): Don't create a moribund location if
3428 the target supports reporting stops of the type of the removed
3430 * breakpoint.h (program_breakpoint_here_p): New declaration.
3431 * infrun.c (adjust_pc_after_break): Return early if the target has
3432 already adjusted the PC. Add comments.
3433 (handle_signal_stop): If nothing explains a signal, and the target
3434 tells us the stop was caused by a software breakpoint, check if
3435 there's a breakpoint instruction in the memory. If so, adjust the
3436 PC before presenting the stop to the user. Otherwise, ignore the
3437 trap. If nothing explains a signal, and the target tells us the
3438 stop was caused by a hardware breakpoint, ignore the trap.
3439 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
3440 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
3441 to_supports_stopped_by_hw_breakpoint>: New fields.
3442 (target_stopped_by_sw_breakpoint)
3443 (target_supports_stopped_by_sw_breakpoint)
3444 (target_stopped_by_hw_breakpoint)
3445 (target_supports_stopped_by_hw_breakpoint): Define.
3446 * target-delegates.c: Regenerate.
3448 2015-03-04 Pedro Alves <palves@redhat.com>
3450 * infrun.c (follow_fork_inferior): Use the whole of the
3451 inferior_ptid and pending_follow.related_pid ptids instead of
3452 building ptids from the process components. Adjust verbose output
3453 to use target_pid_to_str.
3454 * linux-nat.c (linux_child_follow_fork): Use the whole of the
3455 inferior_ptid and pending_follow.related_pid ptids instead of
3456 building ptids from the process components.
3458 2015-03-04 Mark Kettenis <kettenis@gnu.org>
3460 * inf-ptrace.c [PT_GET_PROCESS_STATE]
3461 (inf_ptrace_insert_fork_catchpoint): New function.
3462 (inf_ptrace_remove_fork_catchpoint): New function.
3463 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
3465 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3467 * s390-linux-tdep.c (s390_register_name): Return empty string
3468 instead of NULL for registers that shouldn't be visible.
3470 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3472 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
3473 XML file for 64-bit targets.
3475 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
3477 * target.h (find_default_create_inferior): Remove declaration.
3478 (find_default_attach): Likewise.
3480 2015-03-03 Pedro Alves <palves@redhat.com>
3482 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
3483 Use ptid_get_pid to get the overall process id when resuming all
3486 2015-03-03 Pedro Alves <palves@redhat.com>
3488 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
3489 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
3490 * inf-ptrace.c (get_ptrace_pid): New function.
3491 (inf_ptrace_resume): Use it.
3492 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
3495 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3497 * nat/linux-btrace.c: Include sys/utsname.h.
3498 (linux_determine_kernel_ptr_bits): New.
3499 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
3500 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
3503 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3505 * btrace.c (ftrace_update_function): Treat return as tailcall for
3506 "_dl_runtime_resolve".
3508 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3510 * btrace.h (btrace_function) <lbegin, lend>: Remove.
3511 * btrace.c (ftrace_debug): Do not print the line range.
3512 (ftrace_skip_file, ftrace_update_lines): Remove.
3513 (ftrace_new_function): Remove lbegin and lend initialization.
3514 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
3515 * record-btrace.c (btrace_compute_src_line_range): New.
3516 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
3518 2015-03-02 Pedro Alves <palves@redhat.com>
3520 * infrun.c (follow_exec): Delete all threads of the process except
3521 the event thread. Extended comments.
3523 2015-03-02 Joel Brobecker <brobecker@adacore.com>
3525 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
3527 2015-03-02 Joel Brobecker <brobecker@adacore.com>
3529 * utils.h: Remove <stdbool.h> #include.
3530 (producer_is_gcc): Change return type to "int".
3531 * utils.c (producer_is_gcc): Change return type to int.
3532 Return 1 instead of true, and 0 instead of false.
3533 Adjust function documentation accordingly.
3535 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
3537 * s390-linux-nat.c (have_regset_vxrs): New static variable.
3538 (s390_linux_fetch_inferior_registers): Handle vector registers, if
3540 (s390_linux_store_inferior_registers): Likewise.
3541 (s390_get_hwcap): Remove function. Embed its logic...
3542 (s390_read_description): ...here. Yield a target description with
3543 vector registers if applicable.
3544 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
3545 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
3546 "features/s390x-tevx-linux64.c".
3547 (struct gdbarch_tdep) <v0_full_regnum>: New field.
3548 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
3549 for "GNU/Linux-specific registers".
3550 (s390_dwarf_reg_r0l): New enum value.
3551 (s390_dwarf_reg_to_regnum): Support vector registers.
3552 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
3553 of GPR lower halves.
3554 (regnum_is_vxr_full): New function.
3555 (s390_register_name): New function.
3556 (s390_pseudo_register_name): Handle v0-v15, which are composed of
3557 f0-f15 and v0l-v15l.
3558 (s390_pseudo_register_type): Likewise.
3559 (s390_pseudo_register_read): Likewise.
3560 (s390_pseudo_register_write): Likewise.
3561 (s390_value_from_register): Account for the fact that values are
3562 placed left-justified in vector registers.
3563 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
3564 the vector reggroup and omit them from the general reggroup.
3565 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
3566 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
3567 (s390_iterate_over_regset_sections): Add iterations for the two
3569 (s390_core_read_description): Yield a target description with
3570 vector registers if applicable.
3571 (s390_gdbarch_init): Handle target descriptions with vector
3572 registers. Add "register_name" gdbarch method.
3573 (_initialize_s390_tdep): Call new tdesc initialization functions.
3574 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
3575 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
3576 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
3577 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
3578 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
3579 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
3580 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
3581 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
3582 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
3583 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
3584 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
3585 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
3586 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
3587 (S390_NUM_REGS): Adjust value.
3588 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
3589 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
3590 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
3591 * NEWS: Announce S/390 vector register support.
3593 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
3595 * features/s390-tevx-linux64.xml: New file.
3596 * features/s390-vx-linux64.xml: New file.
3597 * features/s390-vx.xml: New file.
3598 * features/s390x-tevx-linux64.xml: New file.
3599 * features/s390x-vx-linux64.xml: New file.
3600 * features/Makefile (WHICH): Add s390-vx-linux64,
3601 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
3602 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
3603 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
3605 * features/s390-tevx-linux64.c: New generated file.
3606 * features/s390-vx-linux64.c: Likewise.
3607 * features/s390x-tevx-linux64.c: Likewise.
3608 * features/s390x-vx-linux64.c: Likewise.
3609 * regformats/s390-tevx-linux64.dat: Likewise.
3610 * regformats/s390-vx-linux64.dat: Likewise.
3611 * regformats/s390x-tevx-linux64.dat: Likewise.
3612 * regformats/s390x-vx-linux64.dat: Likewise.
3614 2015-02-28 Doug Evans <xdje42@gmail.com>
3616 * symtab.h (struct symtab) <next>: Fix comment.
3618 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
3620 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
3623 2015-02-27 Pedro Alves <palves@redhat.com>
3625 * dtrace-probe.c (dtrace_probe_ops): Make extern.
3627 2015-02-27 Pedro Alves <palves@redhat.com>
3629 * common/common-exceptions.h (exception_none): Declare.
3630 * common/common-exceptions.c (exception_none): Moved from
3632 (exceptions_state_mc_init): Use exception_none.
3633 * exceptions.c (exception_none): Move to
3634 common/common-exceptions.c.
3635 * exceptions.h (exception_none): Move to
3636 common/common-exceptions.h.
3638 2015-02-27 Pedro Alves <palves@redhat.com>
3640 * main.c (catch_command_errors, catch_command_errors_const):
3641 Remove 'mask' argument. Adjust.
3642 (captured_main): Adjust callers.
3644 2015-02-27 Pedro Alves <palves@redhat.com>
3646 * python/python-internal.h: Include "extension-priv.h".
3648 2015-02-27 Pedro Alves <palves@redhat.com>
3650 * breakpoint.h (enum print_stop_action): Move further up in the
3653 2015-02-27 Pedro Alves <palves@redhat.com>
3655 * gdbarch.sh: Include regcache.h.
3656 * gdbarch.h: Regenerate.
3658 2015-02-27 Pedro Alves <palves@redhat.com>
3660 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
3661 Remove duplicate const.
3662 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
3665 2015-02-27 Pedro Alves <palves@redhat.com>
3667 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
3668 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
3669 * features/feature_to_c.sh: Tag the generated xml_builtin array
3670 with extern const in C++ mode.
3672 2015-02-27 Tom Tromey <tromey@redhat.com>
3674 * minidebug.c (struct lzma_stream): Rename to ...
3675 (struct gdb_lzma_stream): ... this.
3676 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
3678 2015-02-27 Pedro Alves <palves@redhat.com>
3680 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
3682 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
3683 (mi_cmd_stack_list_variables): Use it.
3685 2015-02-27 Pedro Alves <palves@redhat.com>
3687 * x86-linux-nat.c (u_debugreg_offset): New function.
3688 (x86_linux_dr_get, x86_linux_dr_set): Use it.
3690 2015-02-27 Pedro Alves <palves@redhat.com>
3692 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
3694 Include break-common.h.
3696 2015-02-27 Tom Tromey <tromey@redhat.com>
3697 Pedro Alves <palves@redhat.com>
3699 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
3700 local used to iterate over enums.
3701 * completer.c (signal_completer): Likewise.
3702 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
3703 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
3704 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
3705 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
3706 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
3707 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
3708 * tui-wingeneral.c (tui_refresh_all): Likewise.
3710 2015-02-27 Pedro Alves <palves@redhat.com>
3712 * target.h: Include "infrun.h".
3714 2015-02-27 Pedro Alves <palves@redhat.com>
3716 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
3718 2015-02-27 Pedro Alves <palves@redhat.com>
3720 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
3722 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
3724 2015-02-27 Pedro Alves <palves@redhat.com>
3726 * cli-out.c (_rl_erase_entire_line): Move declaration out of
3727 cli_mld_erase_entire_line, and make it extern "C".
3728 * common/common-defs.h (EXTERN_C): New.
3729 * completer.c (_rl_completion_prefix_display_length)
3730 (_rl_print_completions_horizontally, QSFUNC): Move declarations
3731 out of gdb_display_match_list_1.
3732 (_rl_qsort_string_compare): Move declaration out of
3733 gdb_display_match_list_1, and make it extern "C".
3734 * defs.h (re_comp): Use EXTERN_C.
3735 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
3736 and make it extern "C".
3737 (monstartup): Move declaration out of maintenance_set_profile_cmd,
3738 and make it extern "C".
3739 (main): Move declaration out of maintenance_set_profile_cmd.
3740 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
3743 2015-02-27 Pedro Alves <palves@redhat.com>
3745 * python/python.c (GdbMethods): Rename to ...
3746 (python_GdbMethods): ... this and make extern.
3747 (GdbModuleDef): Rename to ...
3748 (python_GdbModuleDef): ... this and make extern.
3750 2015-02-27 Pedro Alves <palves@redhat.com>
3752 * record-btrace.c (set_record_btrace_cmdlist)
3753 (show_record_btrace_cmdlist): Remove redefinitions.
3755 2015-02-27 Tom Tromey <tromey@redhat.com>
3756 Pedro Alves <palves@redhat.com>
3758 * dwarf2-frame.c (enum cfa_how_kind, struct
3759 dwarf2_frame_state_reg_info): Move out of struct
3761 * dwarf2read.c (struct tu_stats): Move out of struct
3763 (struct file_entry): Move out of struct line_header.
3764 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
3765 typedef_field_list): Move out of struct field_info.
3766 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
3767 Move out of struct dynamic_prop.
3768 (union type_owner, union field_location, struct field, struct
3769 range_bounds, union type_specific): Move out of struct main_type.
3770 (struct fn_fieldlist, struct fn_field, struct typedef_field)
3771 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
3772 (struct call_site_target, union call_site_parameter_u, struct
3773 call_site_parameter): Move out of struct call_site.
3774 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
3776 (enum srcdest_kind): Move out of struct srcdest.
3777 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
3778 * prologue-value.h (enum prologue_value_kind): Move out of struct
3780 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
3782 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
3783 out of struct field_info.
3784 * symfile.h (struct other_sections): Move out of struct
3786 * symtab.c (struct symbol_cache_slot): Move out struct
3788 * target-descriptions.c (enum tdesc_type_kind): Move out of
3789 typedef struct tdesc_type.
3790 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
3791 struct tui_line_or_address.
3792 * value.c (enum internalvar_kind, union internalvar_data): Move
3793 out of struct internalvar.
3794 * xtensa-tdep.h (struct ctype_cache): Move out of struct
3797 2015-02-27 Tom Tromey <tromey@redhat.com>
3798 Pedro Alves <palves@redhat.com>
3800 Rename symbols whose names are reserved C++ keywords throughout.
3802 2015-02-27 Pedro Alves <palves@redhat.com>
3804 * Makefile.in (COMPILER): New, get it from autoconf.
3805 (COMPILE.pre, CC_LD): Use COMPILER.
3806 (CXX): Get from autoconf instead.
3807 (CXX_FOR_TARGET): Default to g++ instead of gcc.
3808 * acinclude.m4: Include build-with-cxx.m4.
3809 * build-with-cxx.m4: New file.
3810 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
3811 Disable -Werror by default if building in C++ mode.
3812 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
3813 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
3814 Run supported-warning-flags tests with the C++ compiler.
3815 Save/restore CXXFLAGS too.
3816 * configure: Regenerate.
3818 2015-02-27 Pedro Alves <palves@redhat.com>
3820 * libiberty.m4: New file.
3821 * acinclude.m4: Include libiberty.m4.
3822 * configure.ac: Call libiberty_INIT.
3823 * config.in, configure: Regenerate.
3825 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
3827 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
3828 31-bit targets, but 64-bit targets as well.
3829 (s390_gnu_triplet_regexp): New function.
3830 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
3831 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
3834 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
3836 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
3837 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
3838 from CONTEXT_DEBUGGER.
3840 2015-02-26 Doug Evans <dje@google.com>
3842 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
3844 (set_type_vptr_fieldno): Ditto.
3845 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
3846 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
3848 2015-02-26 Pedro Alves <palves@redhat.com>
3850 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
3851 * complaints.c (vcomplaint): Pass argument FMT directly to
3852 printf-like functions instead of complaint->fmt.
3853 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
3854 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
3855 * compile/compile-loc2c.c (pushf, unary, binary): Add
3857 (do_compile_dwarf_expr_to_c): Pass string literal as format string
3859 (BINARY): Pass string literal as format string to 'binary'.
3860 * compile/compile-object-load.c (link_callbacks_einfo): Add
3862 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
3864 2015-02-26 Pedro Alves <palves@redhat.com>
3866 * windows-termcap.c: Rename to ...
3867 * stub-termcap.c: ... this. Adjust header line.
3868 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
3870 * configure: Regenerate.
3871 * configure.ac: Refer to stub-termcap.o instead of
3873 * gdb_curses.h: Mention stub-termcap.c instead of
3876 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3878 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
3879 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
3881 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
3883 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
3885 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3887 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
3888 bfd_canonicalize_symtab.
3890 2015-02-25 John Baldwin <jhb@FreeBSD.org>
3892 * amd64fbsd-nat.c: Include sys/user.h.
3893 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3894 instead of KERN_PS_STRINGS to locate the signal trampoline.
3895 * i386fbsd-nat.c: Include sys/user.h.
3896 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3897 instead of KERN_PS_STRINGS to locate the signal trampoline.
3898 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
3899 (amd64fbsd_sigtramp_p): New.
3900 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
3901 longer set default values.
3902 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
3903 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
3904 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
3905 (i386fbsd_freebsd4_sigtramp_start)
3906 (i386fbsd_freebsd4_sigtramp_middle)
3907 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
3908 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
3909 (i386fbsd_sigtramp_p): New.
3910 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
3911 longer set default values.
3912 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
3914 2015-02-25 John Baldwin <jhb@freebsd.org>
3916 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
3917 get_frame_register instead of frame_unwind_register_unsigned.
3919 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3922 * compile/compile-c-support.c (c_compute_program): Change // comment.
3923 * compile/compile-object-load.c (setup_sections): Change // comment.
3925 2015-02-26 Joel Brobecker <brobecker@adacore.com>
3928 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
3930 2015-02-23 Pedro Alves <palves@redhat.com>
3932 * remote.c (skip_to_semicolon): New function.
3933 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
3934 special case the stop reasons that look like hex numbers
3935 upfront. Instead handle real register numbers after matching
3936 all the known stop reasons.
3938 2015-02-21 Doug Evans <dje@google.com>
3940 PR c++/17976, symtab/17821
3941 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
3942 is_in_anonymous. All callers updated.
3943 (find_symbol_in_baseclass): Ditto.
3944 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
3945 for symbols in an anonymous namespace.
3946 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
3947 DW_AT_name directly.
3948 (dwarf2_name): Convert missing namespace name to
3949 CP_ANONYMOUS_NAMESPACE_STR.
3951 2015-02-20 Pedro Alves <palves@redhat.com>
3953 * linux-nat.c (linux_handle_extended_wait): Call
3954 thread_db_notice_clone whenever a new clone LWP is detected.
3955 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
3957 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
3958 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
3959 (linux_unstop_all_lwps): Declare.
3960 * linux-thread-db.c (struct thread_get_info_inout): Delete.
3961 (thread_get_info_callback): Delete.
3962 (thread_from_lwp): Use td_thr_get_info and record_thread.
3963 (thread_db_attach_lwp): Delete.
3964 (thread_db_notice_clone): New function.
3965 (try_thread_db_load_1): If /proc is mounted and shows the
3966 process'es task list, walk over all LWPs and call thread_from_lwp
3967 instead of relying on td_ta_thr_iter.
3968 (attach_thread): Don't call check_thread_signals here. Split the
3969 tail part of the function (which adds the thread to the core GDB
3971 (record_thread): ... this function. Call check_thread_signals
3973 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
3974 call thread_from_lwp.
3975 (thread_db_update_thread_list): Rename to ...
3976 (thread_db_update_thread_list_org): ... this.
3977 (thread_db_update_thread_list): New function.
3978 (thread_db_find_thread_from_tid): Delete.
3979 (thread_db_get_ada_task_ptid): Simplify.
3980 * nat/linux-procfs.c: Include <sys/stat.h>.
3981 (linux_proc_task_list_dir_exists): New function.
3982 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
3984 2015-02-20 Pedro Alves <palves@redhat.com>
3986 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
3987 main LWP. Handle the case of waitpid returning 0 if we're already
3988 attached to the LWP. Don't set the LWP's last_resume_kind to
3989 resume_stop if we already knew about the LWP.
3990 (linux_nat_filter_event): Add debug logs.
3992 2015-02-20 Pedro Alves <palves@redhat.com>
3994 * target.h (forward_target_decr_pc_after_break): Delete
3997 2015-02-20 Pedro Alves <palves@redhat.com>
4000 * linux-thread-db.c (thread_get_info_callback): Return early if
4001 the thread's lwp id is -1.
4003 2015-02-20 Joel Brobecker <brobecker@adacore.com>
4007 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
4009 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
4010 (dtrace_get_probes) Change type of variable 'dof'.
4012 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
4014 PR breakpoints/16812
4015 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
4016 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
4017 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
4019 2015-02-19 David Taylor <dtaylor@emc.com>
4021 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
4023 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
4025 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
4027 (tui_putc): Don't call tui_handle_resize_during_io.
4028 (tui_getc): Likewise.
4029 (tui_mld_getc): Likewise.
4030 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
4031 (tui_sigwinch_token): New static variable.
4032 (tui_initialize_win): Adjust documentation. Set
4034 (tui_async_resize_screen): New asynchronous callback.
4035 (tui_sigwinch_handler): Adjust documentation. Asynchronously
4036 invoke tui_async_resize_screen.
4038 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
4040 * configure: Regenerated.
4041 * configure.ac: Use GDB_AC_TRANSFORM.
4042 * Makefile.in (aclocal_m4_deps): Added transform.m4.
4043 * acinclude.m4: sinclude transform.m4.
4044 * transform.m4: New file.
4045 (GDB_AC_TRANSFORM): New macro.
4047 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4049 * NEWS: Announce the support for DTrace SDT probes.
4051 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4053 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
4054 (amd64_dtrace_parse_probe_argument): New function.
4055 (amd64_dtrace_probe_is_enabled): Likewise.
4056 (amd64_dtrace_enable_probe): Likewise.
4057 (amd64_dtrace_disable_probe): Likewise.
4058 (amd64_linux_init_abi): Register the
4059 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
4060 `gdbarch_dtrace_disable_probe' and
4061 `gdbarch_dtrace_probe_is_enabled' hooks.
4062 (amd64_dtrace_disabled_probe_sequence_1): New constant.
4063 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
4064 (amd64_dtrace_enable_probe_sequence): Likewise.
4065 (amd64_dtrace_disable_probe_sequence): Likewise.
4067 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4069 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
4070 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
4071 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
4073 * Makefile.in (SFILES): dtrace-probe.c added.
4074 * configure: Regenerate.
4075 * dtrace-probe.c: New file.
4076 (SHT_SUNW_dof): New constant.
4077 (dtrace_probe_type): New enum.
4078 (dtrace_probe_arg): New struct.
4079 (dtrace_probe_arg_s): New typedef.
4080 (struct dtrace_probe_enabler): New struct.
4081 (dtrace_probe_enabler_s): New typedef.
4082 (dtrace_probe): New struct.
4083 (dtrace_probe_is_linespec): New function.
4084 (dtrace_dof_sect_type): New enum.
4085 (dtrace_dof_dofh_ident): Likewise.
4086 (dtrace_dof_encoding): Likewise.
4087 (DTRACE_DOF_ENCODE_LSB): Likewise.
4088 (DTRACE_DOF_ENCODE_MSB): Likewise.
4089 (dtrace_dof_hdr): New struct.
4090 (dtrace_dof_sect): Likewise.
4091 (dtrace_dof_provider): Likewise.
4092 (dtrace_dof_probe): Likewise.
4093 (DOF_UINT): New macro.
4094 (DTRACE_DOF_PTR): Likewise.
4095 (DTRACE_DOF_SECT): Likewise.
4096 (dtrace_process_dof_probe): New function.
4097 (dtrace_process_dof): Likewise.
4098 (dtrace_build_arg_exprs): Likewise.
4099 (dtrace_get_arg): Likewise.
4100 (dtrace_get_probes): Likewise.
4101 (dtrace_get_probe_argument_count): Likewise.
4102 (dtrace_can_evaluate_probe_arguments): Likewise.
4103 (dtrace_evaluate_probe_argument): Likewise.
4104 (dtrace_compile_to_ax): Likewise.
4105 (dtrace_probe_destroy): Likewise.
4106 (dtrace_gen_info_probes_table_header): Likewise.
4107 (dtrace_gen_info_probes_table_values): Likewise.
4108 (dtrace_probe_is_enabled): Likewise.
4109 (dtrace_probe_ops): New variable.
4110 (info_probes_dtrace_command): New function.
4111 (_initialize_dtrace_probe): Likewise.
4112 (dtrace_type_name): Likewise.
4114 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4116 * gdbarch.sh (dtrace_parse_probe_argument): New.
4117 (dtrace_probe_is_enabled): Likewise.
4118 (dtrace_enable_probe): Likewise.
4119 (dtrace_disable_probe): Likewise.
4120 * gdbarch.c: Regenerate.
4121 * gdbarch.h: Regenerate.
4123 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4125 * stap-probe.c (stap_probe_ops): Add NULLs in the static
4126 stap_probe_ops for `enable_probe' and `disable_probe'.
4127 * probe.c (enable_probes_command): New function.
4128 (disable_probes_command): Likewise.
4129 (_initialize_probe): Define the cli commands `enable probe' and
4131 (parse_probe_linespec): New function.
4132 (info_probes_for_ops): Use parse_probe_linespec.
4133 * probe.h (probe_ops): New hooks `enable_probe' and
4136 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4138 * probe.c (compute_probe_arg): Moved from stap-probe.c
4139 (compile_probe_arg): Likewise.
4140 (probe_funcs): Likewise.
4141 * stap-probe.c (compute_probe_arg): Moved to probe.c.
4142 (compile_probe_arg): Likewise.
4143 (probe_funcs): Likewise.
4145 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4147 * probe.c (print_ui_out_not_applicables): New function.
4148 (exists_probe_with_pops): Likewise.
4149 (info_probes_for_ops): Do not include column headers for probe
4150 types for which no probe has been actually found on any object.
4151 Also invoke `print_ui_out_not_applicables' in order to match the
4152 column rows with the header when probes of several types are
4154 Print the "Type" column.
4155 * probe.h (probe_ops): Added a new probe operation `type_name'.
4156 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
4157 (stap_type_name): New function.
4159 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
4161 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
4162 (key_is_command_char): Delete.
4164 2015-02-17 Pedro Alves <palves@redhat.com>
4166 * tui/tui.c (tui_enable): Resize windows before anything
4167 might show a window.
4169 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
4172 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
4173 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
4175 * aarch64-tdep.h (tdesc_aarch64): Declare.
4177 2015-02-12 Mark Wielaard <mjw@redhat.com>
4179 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
4181 2015-02-13 Doug Evans <dje@google.com>
4183 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
4184 anonymous_namespace to is_in_anonymous for consistency with the rest
4186 (cp_lookup_bare_symbol): Fix typo in comment.
4187 (cp_search_static_and_baseclasses): Ditto.
4188 (search_symbol_list): Use vertical space in comment better.
4189 (reset_directive_searched): Ditto. Fix typo.
4190 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
4192 2015-02-13 Yao Qi <yao.qi@arm.com>
4194 * MAINTAINERS: Update my email address.
4196 2015-02-12 Doug Evans <dje@google.com>
4198 * symtab.c (completion_list_add_name): Fix memory leak.
4200 2015-02-12 Doug Evans <dje@google.com>
4202 * completer.c (complete_line): Remove incorrect comment.
4204 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4206 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
4207 (py_print_frame): Use RETURN_MASK_ERROR.
4209 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4211 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
4212 function comment. Wrap all function that can throw in cleanups.
4213 (gdbpy_apply_frame_filter): Wrap all function that can throw in
4216 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4218 * python/py-framefilter.c (py_print_frame): Substitute goto error.
4219 Remove the error label.
4221 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4223 * python/py-framefilter.c (py_print_frame): Put conditional code paths
4224 with goto first, indent the former else codepath left. Put variable
4225 'elided' to a new inner block.
4227 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4229 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
4231 2015-02-11 Pedro Alves <palves@redhat.com>
4233 * xcoffread.c (within_function): Delete.
4235 2015-02-11 Tom Tromey <tromey@redhat.com>
4236 Pedro Alves <palves@redhat.com>
4238 * breakpoint.c (base_breakpoint_ops): Delete.
4239 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
4240 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
4241 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
4242 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
4243 * python/py-arch.c (arch_object_type): Make extern.
4244 * python/py-block.c (block_syms_iterator_object_type): Make extern.
4245 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
4246 * python/py-cmd.c (cmdpy_object_type): Make extern.
4247 * python/py-continueevent.c (continue_event_object_type)
4248 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
4249 parameter. Update all callers.
4250 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
4251 * python/py-exitedevent.c (exited_event_object_type): Make extern.
4252 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
4253 * python/py-function.c (fnpy_object_type): Make extern.
4254 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
4255 * python/py-infevents.c (call_pre_event_object_type)
4256 (inferior_call_post_event_object_type).
4257 (memory_changed_event_object_type): Make extern.
4258 * python/py-infthread.c (thread_object_type): Make extern.
4259 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
4260 * python/py-linetable.c (linetable_entry_object_type)
4261 (linetable_object_type, ltpy_iterator_object_type): Make extern.
4262 * python/py-newobjfileevent.c (new_objfile_event_object_type)
4263 (clear_objfiles_event_object_type): Make extern.
4264 * python/py-objfile.c (objfile_object_type): Make extern.
4265 * python/py-param.c (parmpy_object_type): Make extern.
4266 * python/py-progspace.c (pspace_object_type): Make extern.
4267 * python/py-signalevent.c (signal_event_object_type): Make extern.
4268 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
4269 * python/py-type.c (type_object_type, field_object_type)
4270 (type_iterator_object_type): Make extern.
4271 * python/python.c (python_extension_script_ops)
4272 (python_extension_ops): Make extern.
4273 * stap-probe.c (stap_probe_ops): Make extern.
4275 2015-02-11 Pedro Alves <pedro@codesourcery.com>
4277 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
4278 because the event thread is not the current thread.
4280 2015-02-11 Doug Evans <xdje42@gmail.com>
4282 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
4283 been initialized yet, return NULL.
4285 2015-02-11 Doug Evans <dje@google.com>
4287 * symfile.h (new_symfile_objfile): Delete.
4288 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
4289 All callers updated.
4291 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
4293 * tui/tui-io.c (tui_handle_resize_during_io): Call
4294 tui_update_gdb_sizes() after resizing the screen.
4295 * tui/tui.c (tui_enable): Resize the terminal before
4296 calling tui_update_gdb_sizes().
4298 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
4300 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
4301 line before printing a newline.
4303 2015-02-11 Mark Wielaard <mjw@redhat.com>
4305 * utils.c (producer_is_gcc): Return true or false.
4307 2015-02-10 Mark Wielaard <mjw@redhat.com>
4309 * utils.h (producer_is_gcc): Change return type to bool. Add major
4311 * utils.c (producer_is_gcc): Likewise.
4312 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
4313 * dwarf2read.c (check_producer): Likewise.
4315 2015-02-10 Pedro Alves <palves@redhat.com>
4317 * infrun.c (displaced_step_fixup): Switch to the event thread
4318 before calling gdbarch_displaced_step_fixup.
4320 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
4322 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
4324 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
4326 * ada-varobj.c (ada_name_of_child): Constify parent.
4327 (ada_path_expr_of_child): Same.
4328 (ada_value_of_child): Same.
4329 (ada_type_of_child): Same.
4330 * c-varobj.c (c_is_path_expr_parent): Same.
4331 (c_describe_child): Same.
4332 (c_name_of_child): Same.
4333 (c_value_of_child): Same.
4334 (c_type_of_child): Same.
4335 (cplus_number_of_children): Same.
4336 (cplus_describe_child): Constify var.
4337 (cplus_name_of_child): Constify parent.
4338 (cplus_value_of_child): Same.
4339 (cplus_type_of_child): Same.
4340 * jv-varobj.c (java_name_of_child): Same.
4341 (java_value_of_child): Same.
4342 (java_type_of_child): Same.
4343 * varobj.c (value_of_child): Same.
4344 (varobj_default_is_path_expr_parent): Constify var, parent and return
4346 (varobj_get_path_expr): Constify var, modify path_expr through
4348 (install_new_value): Constify parent.
4349 (value_of_child): Constify parent.
4350 * varobj.h (struct varobj): Constify parent.
4351 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
4353 (varobj_get_path_expr): Constify var.
4354 (varobj_get_path_expr_parent): Constify var and return value.
4356 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
4358 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
4359 (arm_prologue_this_id): Move PC and SP limit checks to
4360 arm_prologue_unwind_stop_reason.
4361 (arm_prologue_unwind) <stop_reason> : Set to
4362 arm_prologue_unwind_stop_reason.
4364 2015-02-09 Mark Wielaard <mjw@redhat.com>
4366 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
4367 DW_LANG_Fortran08 as language_fortran.
4369 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
4372 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
4373 of pointer against char.
4375 2015-02-09 Mark Wielaard <mjw@redhat.com>
4377 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
4378 (c_type_print_modifier): Likewise.
4379 * dwarf2read.c (read_tag_atomic_type): New function.
4380 (read_type_die_1): Handle DW_TAG_atomic_type.
4381 * gdbtypes.c (make_atomic_type): New function.
4382 (recursive_dump_type): Handle TYPE_ATOMIC.
4383 * gdbtypes.h (enum type_flag_values): Renumber.
4384 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
4385 (TYPE_ATOMIC): New macro.
4386 (make_atomic_type): Declare.
4388 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4390 * btrace.c (ftrace_find_call): Skip gaps.
4391 (ftrace_new_function): Initialize level.
4392 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
4393 (ftrace_new_switch): Update
4395 (ftrace_new_gap): New.
4396 (ftrace_update_function): Create new function after gap.
4397 (btrace_compute_ftrace_bts): Create gap on error.
4398 (btrace_stitch_bts): Update parameters. Clear trace if it
4400 (btrace_stitch_trace): Update parameters. Update callers.
4401 (btrace_clear): Reset the number of gaps.
4402 (btrace_insn_get): Return NULL if the iterator points to a gap.
4403 (btrace_insn_number): Return zero if the iterator points to a gap.
4404 (btrace_insn_end): Allow gaps at the end.
4405 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
4406 (btrace_find_insn_by_number): Assert that the found iterator does
4408 (btrace_call_next, btrace_call_prev): Assert that the last function
4410 * btrace.h (btrace_bts_error): New.
4411 (btrace_function): Update comment.
4412 (btrace_function) <insn, insn_offset, number>: Update comment.
4413 (btrace_function) <errcode>: New.
4414 (btrace_thread_info) <ngaps>: New.
4415 (btrace_thread_info) <replay>: Update comment.
4416 (btrace_insn_get): Update comment.
4417 * record-btrace.c (btrace_ui_out_decode_error): New.
4418 (record_btrace_info): Print number of gaps.
4419 (btrace_insn_history, btrace_call_history): Call
4420 btrace_ui_out_decode_error for gaps.
4421 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
4423 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4425 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
4426 * nat/linux-btrace.c: (btrace_this_cpu): New.
4427 (cpu_supports_bts): Call btrace_this_cpu.
4428 (intel_supports_bts): Add cpu parameter.
4430 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4432 * btrace.h (btrace_insn_class): New.
4433 (btrace_insn) <size, iclass>: New.
4434 * btrace.c (ftrace_find_call): Update parameters. Update users.
4435 Use instruction classification.
4436 (ftrace_new_return): Update parameters. Update users.
4437 (ftrace_update_function): Update parameters. Update users. Use
4438 instruction classification.
4439 (ftrace_update_insns): Update parameters. Update users.
4440 (ftrace_classify_insn): New.
4441 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
4442 TRY_CATCH around call to gdb_insn_length.
4444 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4446 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
4447 Update parameters. Update users.
4449 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4451 * btrace.c (parse_xml_btrace_conf_bts): Add size.
4452 (btrace_conf_bts_attributes): New.
4453 (btrace_conf_children): Add attributes.
4454 * common/btrace-common.h (btrace_config_bts): New.
4455 (btrace_config)<bts>: New.
4456 (btrace_config): Update comment.
4457 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
4459 * features/btrace-conf.dtd: Increment version. Add size
4460 attribute to bts element.
4461 * record-btrace.c (set_record_btrace_bts_cmdlist,
4462 show_record_btrace_bts_cmdlist): New.
4463 (record_btrace_adjust_size, record_btrace_print_bts_conf,
4464 record_btrace_print_conf, cmd_set_record_btrace_bts,
4465 cmd_show_record_btrace_bts): New.
4466 (record_btrace_info): Call record_btrace_print_conf.
4467 (_initialize_record_btrace): Add commands.
4468 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
4469 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
4470 (btrace_sync_conf): Synchronize bts size.
4471 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
4472 * NEWS: Announce new commands and new packets.
4474 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4476 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
4477 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
4478 (x86_linux_btrace_conf): New.
4479 (x86_linux_create_target): Initialize to_btrace_conf.
4480 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
4481 Check format. Split into this and ...
4482 (linux_enable_bts): ... this.
4483 (linux_btrace_conf): New.
4484 (perf_event_skip_record): Renamed into ...
4485 (perf_event_skip_bts_record): ... this. Updated users.
4486 (linux_disable_btrace): Split into this and ...
4487 (linux_disable_bts): ... this.
4488 (linux_read_btrace): Check format.
4489 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
4490 (linux_btrace_conf): New.
4491 (btrace_target_info)<ptid>: Moved.
4492 (btrace_target_info)<conf>: New.
4493 (btrace_target_info): Split into this and ...
4494 (btrace_tinfo_bts): ... this. Updated users.
4495 * btrace.c (btrace_enable): Update parameters.
4496 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
4497 (btrace_conf_children, btrace_conf_attributes)
4498 (btrace_conf_elements): New.
4499 * btrace.h (btrace_enable): Update parameters.
4500 (btrace_conf, parse_xml_btrace_conf): New.
4501 * common/btrace-common.h (btrace_config): New.
4502 * feature/btrace-conf.dtd: New.
4503 * record-btrace.c (record_btrace_conf): New.
4504 (record_btrace_cmdlist): New.
4505 (record_btrace_enable_warn, record_btrace_open): Pass
4506 &record_btrace_conf.
4507 (record_btrace_info): Print recording format.
4508 (cmd_record_btrace_bts_start): New.
4509 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
4510 (_initialize_record_btrace): Add "record btrace bts" subcommand.
4511 Add "record bts" alias command.
4512 * remote.c (remote_state)<btrace_config>: New.
4513 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
4514 (remote_protocol_features): Add qXfer:btrace-conf:read.
4515 (remote_open_1): Call remote_btrace_reset.
4516 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
4517 (btrace_target_info)<conf>: New.
4518 (btrace_sync_conf, btrace_read_config): New.
4519 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
4521 (remote_btrace_conf): New.
4522 (init_remote_ops): Initialize to_btrace_conf.
4523 (_initialize_remote): Add qXfer:btrace-conf packet.
4524 * target.c (target_enable_btrace): Update parameters.
4525 (target_btrace_conf): New.
4526 * target.h (target_enable_btrace): Update parameters.
4527 (target_btrace_conf): New.
4528 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
4529 (target_ops)<to_enable_btrace>: Update parameters and comment.
4530 (target_ops)<to_btrace_conf>: New.
4531 * target-delegates: Regenerate.
4532 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
4533 (target_debug_print_const_struct_btrace_target_info_p): New.
4534 * NEWS: Announce new command and new packet.
4536 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4538 * nat/linux-btrace.h (perf_event_buffer): New.
4539 (btrace_target_info) <buffer, size, data_head>: Replace with ...
4541 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
4542 (perf_event_buffer_size, perf_event_buffer_begin)
4543 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
4545 (perf_event_new_data): New.
4547 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4549 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
4550 * record-btrace.c (record_btrace_open): Remove call to
4551 target_supports_btrace.
4552 * remote.c (remote_supports_btrace): Update parameters.
4553 * target.c (target_supports_btrace): Update parameters.
4554 * target.h (to_supports_btrace, target_supports_btrace): Update
4556 * target-delegates.c: Regenerate.
4557 * target-debug.h (target_debug_print_enum_btrace_format): New.
4558 * nat/linux-btrace.c
4559 (kernel_supports_btrace): Rename into ...
4560 (kernel_supports_bts): ... this. Update users. Update warning text.
4561 (intel_supports_btrace): Rename into ...
4562 (intel_supports_bts): ... this. Update users.
4563 (cpu_supports_btrace): Rename into ...
4564 (cpu_supports_bts): ... this. Update users.
4565 (linux_supports_btrace): Update parameters. Split into this and ...
4566 (linux_supports_bts): ... this.
4567 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
4569 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4571 * Makefile.in (SFILES): Add common/btrace-common.c.
4572 (COMMON_OBS): Add common/btrace-common.o.
4573 (btrace-common.o): Add build rules.
4574 * btrace.c (parse_xml_btrace): Update parameters.
4575 (parse_xml_btrace_block): Set format field.
4576 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
4577 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
4578 (btrace_compute_ftrace): Split into this and...
4579 (btrace_compute_ftrace_bts): ...this.
4580 (btrace_stitch_trace): Split into this and...
4581 (btrace_stitch_bts): ...this.
4582 * btrace.h (parse_xml_btrace): Update parameters.
4583 (make_cleanup_btrace_data): New.
4584 * common/btrace-common.c: New.
4585 * common/btrace-common.h: Include common-defs.h.
4586 (btrace_block_s): Update comment.
4587 (btrace_format): New.
4588 (btrace_format_string): New.
4589 (btrace_data_bts): New.
4591 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
4592 * remote.c (remote_read_btrace): Update parameters.
4593 * target.c (target_read_btrace): Update parameters.
4594 * target.h (target_read_btrace): Update parameters.
4595 (target_ops)<to_read_btrace>: Update parameters.
4596 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
4597 * target-delegates.c: Regenerate.
4598 * target-debug (target_debug_print_struct_btrace_data_p): New.
4599 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
4600 (linux_read_bts): ...this.
4601 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
4603 2015-02-06 Doug Evans <dje@google.com>
4605 * remote-m32r-sdi.c: Include symfile.h.
4607 2015-02-06 Doug Evans <dje@google.com>
4609 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
4610 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
4613 2015-02-06 Pedro Alves <palves@redhat.com>
4615 * linux-thread-db.c (find_new_threads_callback): Add debug output.
4617 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
4620 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
4621 (enable_count_command): Check args for NULL value.
4623 2015-02-05 Doug Evans <xdje42@gmail.com>
4625 * guile/scm-frame.c: Fix spelling errors in a comment.
4627 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
4629 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
4630 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
4633 2015-02-04 Pedro Alves <palves@redhat.com>
4635 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
4636 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
4638 (resume_stopped_resumed_lwps): Don't check whether the thread is
4639 marked as executing.
4640 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
4642 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4644 * regset.h (struct regset): Add flags field.
4645 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
4646 * corelow.c (get_core_register_section): Add warning if the size
4647 exceeds the requested size and the regset does not have the
4648 REGSET_VARIABLE_SIZE flag set.
4649 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
4651 * armbsd-tdep.c (armbsd_gregset): Likewise.
4652 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
4653 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
4654 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
4655 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
4657 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4659 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
4660 For ".reg-xstate", explicitly specify the requested section size
4661 via X86_XSTATE_SIZE instead of just 0 on input and
4662 X86_XSTATE_MAX_SIZE on output.
4663 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
4666 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4669 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
4670 function type, particularly its SIZE parameter.
4671 * gdbarch.h: Regenerate.
4672 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
4673 actual against required size using ">=" instead of "==".
4674 (amd64_collect_fpregset): Likewise.
4675 * i386-tdep.c (i386_supply_gregset): Likewise.
4676 (i386_collect_gregset): Likewise.
4677 (i386_supply_fpregset): Likewise.
4678 (i386_collect_fpregset): Likewise.
4679 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
4680 (mips_fill_gregset_wrapper): Likewise.
4681 (mips_supply_fpregset_wrapper): Likewise.
4682 (mips_fill_fpregset_wrapper): Likewise.
4683 (mips64_supply_gregset_wrapper): Likewise.
4684 (mips64_fill_gregset_wrapper): Likewise.
4685 (mips64_supply_fpregset_wrapper): Likewise.
4686 (mips64_fill_fpregset_wrapper): Likewise.
4687 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
4688 (am33_supply_fpregset_method): Likewise.
4689 (am33_collect_gregset_method): Likewise.
4690 (am33_collect_fpregset_method): Likewise.
4692 2015-02-04 Doug Evans <dje@google.com>
4693 Pedro Alves <palves@redhat.com>
4694 Eli Zaretskii <eliz@gnu.org>
4697 * tui/tui-command.c (tui_refresh_cmd_win): New function.
4698 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
4699 * tui/tui-file.c: #include tui/tui-command.h.
4700 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
4701 (tui_file_flush): Refresh command window if stream is gdb_stdout.
4702 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
4704 2015-02-04 Pedro Alves <palves@redhat.com>
4707 * event-loop.c (gdb_do_one_event): Add default switch case.
4709 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4711 Filter out inferior gcc option -fpreprocessed.
4712 * compile/compile.c (filter_args): New function.
4715 2015-02-03 Pedro Alves <palves@redhat.com>
4717 * event-loop.c: Don't declare nor define a queue type for
4719 (event_queue): Delete.
4720 (create_event, create_file_event, gdb_event_xfree)
4721 (initialize_event_loop, process_event): Delete.
4722 (gdb_do_one_event): Return as soon as one event is handled.
4723 (handle_file_event): Change prototype. Used the passed in
4724 file_handler pointer and ready_mask instead of looping over all
4726 (gdb_wait_for_event): Update the poll/select timeouts before
4727 blocking. Run event handlers directly instead of queueing events.
4728 Return as soon as one event is handled.
4729 (struct async_event_handler_data): Delete.
4730 (invoke_async_event_handler): Delete.
4731 (check_async_event_handlers): Change return type to int. Run
4732 event handlers directly instead of queueing events. Return as
4733 soon as one event is handled.
4734 (handle_timer_event): Delete.
4735 (update_wait_timeout): New function, factored out from
4737 (poll_timers): Reimplement.
4738 * event-loop.h (initialize_event_loop): Delete declaration.
4739 * top.c (gdb_init): Don't call initialize_event_loop.
4741 2015-02-03 Pedro Alves <palves@redhat.com>
4743 * event-loop.c (clear_async_event_handler): New function.
4744 * event-loop.h (clear_async_event_handler): New declaration.
4745 * record-btrace.c (record_btrace_async): New function.
4746 (init_record_btrace_ops): Install record_btrace_async.
4747 * record-full.c (record_full_async): New function.
4748 (record_full_resume): Don't mark the async event source here.
4749 (init_record_full_ops): Install record_full_async.
4750 (record_full_core_resume): Don't mark the async event source here.
4751 (init_record_full_core_ops): Install record_full_async.
4752 * remote.c (remote_async): Mark and clear the async stop reply
4753 queue event-loop token as appropriate.
4755 2015-02-03 Pedro Alves <palves@redhat.com>
4757 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
4758 target_is_async_p instead of target_can_async.
4759 (linux_nat_wait): Use target_is_async_p instead of
4760 target_can_async. Don't enable async here.
4761 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
4762 target_is_async_p instead of target_can_async.
4764 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
4766 * varobj.h (lang_varobj_ops): Mention which return values need
4769 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4771 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
4773 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4776 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
4777 results found in the cache.
4779 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4782 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
4783 when allocating a new one.
4785 2015-02-01 Tom Tromey <tom@tromey.com>
4787 * MAINTAINERS: Remove myself.
4789 2015-01-31 Doug Evans <xdje42@gmail.com>
4791 * dwarf2read.c (process_structure_scope): Update setting of
4792 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
4793 * gdbtypes.c (internal_type_vptr_fieldno): New function.
4794 (set_type_vptr_fieldno): New function.
4795 (internal_type_vptr_basetype): New function.
4796 (set_type_vptr_basetype): New function.
4797 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
4799 (allocate_cplus_struct_type): Initialize vptr_fieldno.
4800 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
4801 (print_cplus_stuff): ... moved here.
4802 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
4803 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
4805 (struct cplus_struct_type): ... here. All uses updated.
4806 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
4807 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
4808 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
4809 * stabsread.c (read_tilde_fields): Update setting of
4810 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
4812 2015-01-31 Doug Evans <xdje42@gmail.com>
4814 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
4816 (cp_print_class_member): Rename local domain to self_type.
4817 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
4818 domain_type to self_type.
4819 (set_die_type) <need_gnat_info>: Handle
4820 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
4821 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
4822 TYPE_SPECIFIC_SELF_TYPE.
4823 * gdbtypes.c (internal_type_self_type): New function.
4824 (set_type_self_type): New function.
4825 (smash_to_memberptr_type): Rename parameter domain to self_type.
4826 Update setting of TYPE_SELF_TYPE.
4827 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
4828 (smash_to_method_type): Rename parameter domain to self_type.
4829 Update setting of TYPE_SELF_TYPE.
4830 (check_stub_method): Call smash_to_method_type.
4831 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
4832 (copy_type_recursive): Ditto.
4833 * gdbtypes.h (enum type_specific_kind): New value
4834 TYPE_SPECIFIC_SELF_TYPE.
4835 (struct main_type) <type_specific>: New member self_type.
4836 (struct cplus_struct_type) <fn_field.type>: Update comment.
4837 (TYPE_SELF_TYPE): Rewrite.
4838 (internal_type_self_type, set_type_self_type): Declare.
4839 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
4841 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
4842 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
4844 * stabsread.c (read_member_functions): Mark methods with
4845 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
4848 2015-01-31 Doug Evans <xdje42@gmail.com>
4850 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
4853 2015-01-31 Doug Evans <xdje42@gmail.com>
4855 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
4856 or unions. Return zero if union.
4857 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
4858 (gnuv3_rtti_type): Pass already-check_typedef'd value to
4860 (compute_vtable_size): Assert only passed structs.
4861 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
4863 2015-01-31 Doug Evans <xdje42@gmail.com>
4865 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
4868 2015-01-31 Gary Benson <gbenson@redhat.com>
4869 Doug Evans <dje@google.com>
4874 * cli/cli-cmds.c (complete_command): Notify user if max-completions
4876 * common/common-exceptions.h (enum errors)
4877 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
4878 * completer.h (get_max_completions_reached_message): New declaration.
4879 (max_completions): Likewise.
4880 (completion_tracker_t): New typedef.
4881 (new_completion_tracker): New declaration.
4882 (make_cleanup_free_completion_tracker): Likewise.
4883 (maybe_add_completion_enum): New enum.
4884 (maybe_add_completion): New declaration.
4885 (throw_max_completions_reached_error): Likewise.
4886 * completer.c (max_completions): New global variable.
4887 (new_completion_tracker): New function.
4888 (free_completion_tracker): Likewise.
4889 (make_cleanup_free_completion_tracker): Likewise.
4890 (maybe_add_completions): Likewise.
4891 (throw_max_completions_reached_error): Likewise.
4892 (complete_line): Remove duplicates and limit result to max_completions
4894 (get_max_completions_reached_message): New function.
4895 (gdb_display_match_list): Handle max_completions.
4896 (_initialize_completer): New declaration and function.
4897 * symtab.c: Include completer.h.
4898 (completion_tracker): New static variable.
4899 (completion_list_add_name): Call maybe_add_completion.
4900 (default_make_symbol_completion_list_break_on_1): Renamed from
4901 default_make_symbol_completion_list_break_on. Maintain
4902 completion_tracker across calls to completion_list_add_name.
4903 (default_make_symbol_completion_list_break_on): New function.
4904 * top.c (init_main): Set rl_completion_display_matches_hook.
4905 * tui/tui-io.c: Include completer.h.
4906 (tui_old_rl_display_matches_hook): New static global.
4907 (tui_rl_display_match_list): Notify user if max-completions reached.
4908 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
4909 * NEWS (New Options): Mention set/show max-completions.
4911 2015-01-31 Gary Benson <gbenson@redhat.com>
4913 * symtab.c (struct add_name_data) <code>: New field.
4915 (add_symtab_completions): New function.
4916 (symtab_expansion_callback): Likewise.
4917 (default_make_symbol_completion_list_break_on): Set datum.code.
4918 Move minimal symbol scan before calling expand_symtabs_matching.
4919 Scan known primary symtabs for externs and statics before calling
4920 expand_symtabs_matching. Pass symtab_expansion_callback as
4921 expansion_notify argument to expand_symtabs_matching. Do not scan
4922 primary symtabs for externs and statics after calling
4923 expand_symtabs_matching.
4925 2015-01-31 Gary Benson <gbenson@redhat.com>
4927 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
4928 (struct quick_symbol_functions) <expand_symtabs_matching>:
4929 New argument expansion_notify. All uses updated.
4930 (expand_symtabs_matching): New argument expansion_notify.
4932 * symfile-debug.c (debug_qf_expand_symtabs_matching):
4933 Also print expansion notify.
4934 * symtab.c (expand_symtabs_matching_via_partial): Call
4935 expansion_notify whenever a partial symbol table is expanded.
4936 * dwarf2read.c (dw2_expand_symtabs_matching): Call
4937 expansion_notify whenever a symbol table is instantiated.
4939 2015-01-31 Doug Evans <xdje42@gmail.com>
4941 * cli-out.c: #include completer.h, readline/readline.h.
4942 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
4943 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
4944 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
4945 * cli-out.h (cli_display_match_list): Declare.
4946 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
4947 (ELLIPSIS_LEN): Ditto.
4948 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
4949 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
4950 (gdb_fnprint, gdb_print_filename): Ditto.
4951 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
4952 (gdb_display_match_list): Ditto.
4953 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
4954 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
4955 (mld_beep_ftype, mld_read_key_ftype): Ditto.
4956 (match_list_displayer): New struct.
4957 (gdb_display_match_list): Declare.
4958 * top.c (init_main): Set rl_completion_display_matches_hook.
4959 * tui/tui-io.c: #include completer.h.
4960 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
4961 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
4962 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
4963 (tui_mld_getc, tui_mld_read_key): Ditto.
4964 (tui_rl_display_match_list): Rewrite.
4965 (tui_handle_resize_during_io): New arg for_completion. All callers
4968 2015-01-31 Doug Evans <xdje42@gmail.com>
4970 Add symbol lookup cache.
4971 * NEWS: Document new options and commands.
4972 * symtab.c (symbol_cache_key): New static global.
4973 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
4974 (SYMBOL_LOOKUP_FAILED): New macro.
4975 (symbol_cache_slot_state): New enum.
4976 (block_symbol_cache): New struct.
4977 (symbol_cache): New struct.
4978 (new_symbol_cache_size, symbol_cache_size): New static globals.
4979 (hash_symbol_entry, eq_symbol_entry): New functions.
4980 (symbol_cache_byte_size, resize_symbol_cache): New functions.
4981 (make_symbol_cache, free_symbol_cache): New functions.
4982 (get_symbol_cache, symbol_cache_cleanup): New function.
4983 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
4984 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
4985 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
4986 (symbol_cache_flush, symbol_cache_dump): New functions.
4987 (maintenance_print_symbol_cache): New function.
4988 (maintenance_flush_symbol_cache): New function.
4989 (symbol_cache_stats): New function.
4990 (maintenance_print_symbol_cache_statistics): New function.
4991 (symtab_new_objfile_observer): New function.
4992 (symtab_free_objfile_observer): New function.
4993 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
4994 (_initialize_symtab): Init symbol_cache_key. New parameter
4995 maint symbol-cache-size. New maint commands print symbol-cache,
4996 print symbol-cache-statistics, flush-symbol-cache.
4997 Install new_objfile, free_objfile observers.
4999 2015-01-31 Joel Brobecker <brobecker@adacore.com>
5002 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
5005 2015-01-31 Doug Evans <xdje42@gmail.com>
5007 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
5008 * auto-load.c: #include ctype.h.
5009 (struct auto_load_pspace_info): Replace member loaded_scripts with
5010 new members loaded_script_files, loaded_script_texts.
5011 (auto_load_pspace_data_cleanup): Update.
5012 (init_loaded_scripts_info): Update.
5013 (get_auto_load_pspace_data_for_loading): Update.
5014 (maybe_add_script_file): Renamed from maybe_add_script. All callers
5016 (maybe_add_script_text): New function.
5017 (clear_section_scripts): Update.
5018 (source_script_file, execute_script_contents): New functions.
5019 (source_section_scripts): Add support for
5020 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
5021 (print_scripts): New function.
5022 (auto_load_info_scripts): Also print inlined scripts.
5023 (maybe_print_unsupported_script_warning): Renamed from
5024 unsupported_script_warning_print. All callers updated.
5025 (maybe_print_script_not_found_warning): Renamed from
5026 script_not_found_warning_print. All callers updated.
5027 * extension-priv.h (struct extension_language_script_ops): New member
5028 objfile_script_executor.
5029 * extension.c (ext_lang_objfile_script_executor): New function.
5030 * extension.h (objfile_script_executor_func): New typedef.
5031 (ext_lang_objfile_script_executor): Declare.
5032 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
5033 * guile/guile.c (guile_extension_script_ops): Update.
5034 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
5035 * python/python.c (python_extension_script_ops): Update.
5036 (gdbpy_execute_objfile_script): New function.
5038 2015-01-31 Eli Zaretskii <eliz@gnu.org>
5040 * tui/tui-io.c (tui_expand_tabs): New function.
5041 (tui_puts, tui_redisplay_readline): Expand TABs into the
5042 appropriate number of spaces.
5043 * tui/tui-regs.c: Include tui-io.h.
5044 (tui_register_format): Call tui_expand_tabs to expand TABs into
5045 the appropriate number of spaces.
5046 * tui/tui-io.h: Add prototype for tui_expand_tabs.
5048 2015-01-30 Doug Evans <dje@google.com>
5050 * NEWS: "info source" command now display producer string if present.
5051 * source.c (source_info): Print producer string if present.
5053 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5055 * varobj.c (varobj_delete): Fix comment.
5057 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5059 * varobj.c (create_child): Modify comment.
5061 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5063 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
5065 (ada_name_of_variable): Same.
5066 (ada_path_expr_of_child): Same.
5067 (ada_value_of_variable): Same.
5068 (ada_value_is_changeable_p): Same.
5069 (ada_value_has_mutated): Same.
5070 * c-varobj.c (varobj_is_anonymous_child): Same.
5071 (c_is_path_expr_parent): Same.
5072 (c_number_of_children): Same.
5073 (c_name_of_variable): Same.
5074 (c_path_expr_of_child): Same.
5076 (c_value_of_variable): Same.
5077 (cplus_number_of_children): Same.
5078 (cplus_name_of_variable): Same.
5079 (cplus_path_expr_of_child): Same.
5080 (cplus_value_of_variable): Same.
5081 * jv-varobj.c (java_number_of_children): Same.
5082 (java_name_of_variable): Same.
5083 (java_path_expr_of_child): Same.
5084 (java_value_of_variable): Same.
5085 * varobj.c (number_of_children): Same.
5086 (name_of_variable): Same.
5088 (varobj_ensure_python_env): Same.
5089 (varobj_get_objname): Same.
5090 (varobj_get_expression): Same.
5091 (varobj_get_display_format): Same.
5092 (varobj_get_display_hint): Same.
5093 (varobj_has_more): Same.
5094 (varobj_get_thread_id): Same.
5095 (varobj_get_frozen): Same.
5096 (dynamic_varobj_has_child_method): Same.
5097 (varobj_get_gdb_type): Same.
5098 (is_path_expr_parent): Same.
5099 (varobj_default_is_path_expr_parent): Same.
5100 (varobj_get_language): Same.
5101 (varobj_get_attributes): Same.
5102 (varobj_is_dynamic_p): Same.
5103 (varobj_get_child_range): Same.
5104 (varobj_value_has_mutated): Same.
5105 (varobj_get_value_type): Same.
5106 (number_of_children): Same.
5107 (name_of_variable): Same.
5108 (check_scope): Same.
5109 (varobj_editable_p): Same.
5110 (varobj_value_is_changeable_p): Same.
5111 (varobj_floating_p): Same.
5112 (varobj_default_value_is_changeable_p): Same.
5114 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5116 * varobj.c (varobj_get_path_expr): Set var->path_expr.
5117 * c-varobj.c (c_path_expr_of_child): Set local var instead of
5119 (cplus_path_expr_of_child): Same.
5121 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5123 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
5125 (mi_cmd_var_info_expression): Same.
5126 * varobj.c (varobj_get_expression): Mention in the comment that
5127 the result must by freed by the caller.
5129 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5131 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
5133 (varobj_update_one): Same.
5134 * varobj.c (update_type_if_necessary): Free curr_type_str and
5136 (varobj_get_type): Specify in comment that the result needs to be
5137 freed by the caller.
5139 2015-01-29 Doug Evans <dje@google.com>
5142 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
5144 2015-01-25 Mark Wielaard <mjw@redhat.com>
5146 * dwarf2read.c (checkproducer): Call producer_is_gcc.
5147 * utils.c (producer_is_gcc_ge_4): Likewise.
5148 (producer_is_gcc): New function.
5149 * utils.h (producer_is_gcc): New declaration.
5151 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5153 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
5155 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
5156 parameter by "addr_stack" parameter.
5157 (resolve_dynamic_range): Replace "addr" parameter by
5158 "stack_addr" parameter. Update function documentation.
5159 Update code accordingly.
5160 (resolve_dynamic_array, resolve_dynamic_union)
5161 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
5162 (resolve_dynamic_type): Update code, following the changes made
5163 to resolve_dynamic_type_internal's interface.
5164 * dwarf2loc.h (struct property_addr_info): New.
5165 (dwarf2_evaluate_property): Replace "address" parameter
5166 by "addr_stack" parameter. Adjust function documentation.
5167 (struct dwarf2_offset_baton): New.
5168 (struct dwarf2_property_baton): Update documentation of
5169 field "referenced_type" to be more general. New field
5170 "offset_info" in union data field.
5171 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
5172 parameter by "addr_stack" parameter. Adjust code accordingly.
5173 Add support for PROP_ADDR_OFFSET properties.
5174 * dwarf2read.c (attr_to_dynamic_prop): Add support for
5175 DW_AT_data_member_location attributes as well. Use case
5176 statements instead of if/else condition.
5178 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5180 * ada-varobj.c (ada_varobj_get_array_number_of_children):
5181 Return zero if PARENT_VALUE is NULL and parent_type's
5182 range type is dynamic.
5184 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5186 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
5187 nonzero if the type's subtype is dynamic.
5188 (resolve_dynamic_range): Also resolve the range's subtype.
5190 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
5192 Pushed by Joel Brobecker <brobecker@adacore.com>.
5193 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
5195 2015-01-27 Doug Evans <dje@google.com>
5197 * NEWS: Mention gdb.Objfile.username.
5198 * python/py-objfile.c (objfpy_get_username): New function.
5199 (objfile_getset): Add "username".
5201 2015-01-24 Mark Wielaard <mjw@redhat.com>
5203 * stack.c (return_command): Markup warning message with _.
5205 2015-01-24 Doug Evans <xdje42@gmail.com>
5207 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
5209 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5211 Fix 100x slowdown regression on DWZ files.
5212 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
5213 (struct line_header): Add offset and offset_in_dwz.
5214 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
5215 (free_line_header_voidp): New declaration.
5216 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
5218 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
5219 (handle_DW_AT_stmt_list): Use line_header_hash.
5220 (free_line_header_voidp): New function.
5221 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
5222 (dwarf_decode_lines): New parameter decode_mapping, use it.
5223 (dwarf2_free_objfile): Free line_header_hash.
5225 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
5228 * valops.c (value_rtti_indirect_type): Catch exception thrown by
5231 2015-01-15 Mark Wielaard <mjw@redhat.com>
5233 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
5235 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
5236 calling_convention an 8 bit bit field.
5237 (TYPE_NO_RETURN): New macro.
5238 * infcmd.c (finish_command): Query if function does not return
5240 * stack.c (return_command): Likewise.
5242 2015-01-23 Pedro Alves <palves@redhat.com>
5244 * linux-nat.c (linux_is_async_p): New macro.
5245 (linux_nat_is_async_p):
5246 (linux_nat_terminal_inferior): Check whether the target can async
5247 instead of whether it is already async.
5248 (linux_nat_terminal_ours): Don't check whether the target is
5250 (linux_async_pipe): Use linux_is_async_p.
5252 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5254 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
5256 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
5257 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
5258 Sort tp_array using tp_array_compar.
5259 (_initialize_thread): Extend thread_apply_all_command help.
5261 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5263 * corelow.c (core_open): Call also thread_command.
5264 * gdbthread.h (thread_command): New prototype moved from ...
5265 * thread.c (thread_command): ... here.
5266 (thread_command): Make it global.
5268 2015-01-22 Pedro Alves <palves@redhat.com>
5270 * configure.ac [*mingw32*]: Check $curses_found instead of
5272 * configure: Regenerate.
5273 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
5274 HAVE_NCURSES_NCURSES_H checks.
5276 2015-01-22 Eli Zaretskii <eliz@gnu.org>
5278 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
5279 fails with the 1st arg NULL, try again with "unknown". Don't test
5280 the "cup" capability: it isn't supported by the Windows port of
5281 ncurses, but the Windows console driver is still capable of
5284 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5286 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
5288 2015-01-22 Eli Zaretskii <eliz@gnu.org>
5290 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
5291 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
5292 reason that "make TAGS" is broken.
5294 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
5296 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
5297 and check additional store instructions.
5299 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
5301 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
5303 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
5305 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
5306 ppc_canonicalize_syscall, ppc_linux_syscall_record,
5307 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
5308 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5309 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
5310 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
5311 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
5312 ppc_process_record_op19, ppc_process_record_op31,
5313 ppc_process_record_op59, ppc_process_record_op60,
5314 ppc_process_record_op63): Likewise.
5316 2015-01-20 Joel Brobecker <brobecker@adacore.com>
5318 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
5319 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
5322 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
5324 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
5325 ppc_process_record_op31, ppc_process_record_op59,
5326 ppc_process_record_op60, ppc_process_record_op63,
5327 ppc_process_record): Fix -Wformat warning.
5328 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
5329 Remove unused variables.
5331 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
5333 * MAINTAINERS (Write After Approval): Add "Chen Gang".
5335 2015-01-19 Eli Zaretskii <eliz@gnu.org>
5337 * configure.ac [*mingw32*]: Only add windows-termcap.o to
5338 CONFIG_OBS if not building with a curses library.
5339 * configure: Regenerate.
5341 * windows-termcap.c: Include defs.h. Make the whole body empty if
5342 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
5343 HAVE_NCURSES_NCURSES_H is defined.
5345 2015-01-19 Joel Brobecker <brobecker@adacore.com>
5347 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
5348 from end of line to start of next line.
5350 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5352 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
5353 Scan PLT stub backward for reverse debugging.
5354 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5356 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5357 Ulrich Weigand <uweigand@de.ibm.com>
5359 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
5361 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
5363 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
5364 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
5365 (ppc_linux_init_abi): Set process_record, process_record_signal.
5366 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
5367 ppc_linux_record_tdep to gdbarch_tdep.
5368 (ppc_process_record): New declaration.
5369 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
5370 ppc_process_record_op19, ppc_process_record_op31,
5371 ppc_process_record_op59, ppc_process_record_op60,
5372 ppc_process_record_op63, ppc_process_record): New functions.
5374 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5376 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
5377 rs6000_in_function_epilogue_frame_p and add an argument
5379 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
5380 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
5382 (rs6000_epilogue_frame_unwind): New.
5383 (rs6000_gdbarch_init): Append epilogue unwinder.
5385 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
5387 * nat/linux-personality.c: Replace "#ifndef
5388 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
5389 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
5392 2015-01-16 Eli Zaretskii <eliz@gnu.org>
5394 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
5396 (_initialize_tui_win) <border-kind, border-mode>:
5397 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
5398 (tui_set_tab_width_command): Fix the commentary.
5400 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
5402 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
5404 (tui_set_tab_width_command): Delete and recreate the source and
5405 the disassembly windows, to show the effect of the changed tab
5408 * tui/tui-data.h (LINE_PREFIX): Make shorter
5409 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
5410 "Thread NNNNN.XXXX" thread ID notation on Windows.
5412 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
5414 Fix gcc-5 compilation.
5415 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
5417 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
5419 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
5420 (linux-personality.o): New rule.
5421 * common/common-defs.h: Include <stdint.h>.
5422 * config/aarch64/linux.mh (NATDEPFILES): Include
5423 linux-personality.o.
5424 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
5425 * config/arm/linux.mh (NATDEPFILES): Likewise.
5426 * config/i386/linux64.mh (NATDEPFILES): Likewise.
5427 * config/i386/linux.mh (NATDEPFILES): Likewise.
5428 * config/ia64/linux.mh (NATDEPFILES): Likewise.
5429 * config/m32r/linux.mh (NATDEPFILES): Likewise.
5430 * config/m68k/linux.mh (NATDEPFILES): Likewise.
5431 * config/mips/linux.mh (NATDEPFILES): Likewise.
5432 * config/pa/linux.mh (NATDEPFILES): Likewise.
5433 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
5434 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
5435 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
5436 * config/s390/linux.mh (NATDEPFILES): Likewise.
5437 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
5438 * config/sparc/linux.mh (NATDEPFILES): Likewise.
5439 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
5440 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
5441 * defs.h: Remove #include <stdint.h> (moved to
5442 common/common-defs.h).
5443 * linux-nat.c: Include nat/linux-personality.h. Remove #include
5444 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
5445 nat/linux-personality.c).
5446 (linux_nat_create_inferior): Remove code to disable address space
5447 randomization (moved to nat/linux-personality.c). Create cleanup
5448 to disable address space randomization.
5449 * nat/linux-personality.c: New file.
5450 * nat/linux-personality.h: Likewise.
5452 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
5454 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
5455 common/posix-strerror.c.
5456 (posix-strerror.o): New rule.
5457 (mingw-strerror.o): Likewise.
5458 * common/common-utils.h (safe_strerror): Move prototype to here,
5460 * common/common.host: New file.
5461 * common/mingw-strerror.c: Likewise.
5462 * common/posix-strerror.c: Likewise.
5463 * configure: Regenerated.
5464 * configure.ac: Source common/common.host. Add variable
5465 common_host_obs to gdb_host_obs.
5466 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
5467 gdb/common/posix-strerror.c when warning about the use of
5469 * mingw-hdep.c (safe_strerror): Remove definition; move it to
5470 common/mingw-strerror.c.
5471 * posix-hdep.c (safe_strerror): Remove definition; move it to
5472 common/posix-hdep.c.
5473 * utils.h (safe_strerror): Remove prototype; move to
5474 common/common-utils.h.
5476 2015-01-15 Joel Brobecker <brobecker@adacore.com>
5480 2015-01-15 Joel Brobecker <brobecker@adacore.com>
5482 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
5483 ___XA type if the array has already been fixed.
5485 2015-01-14 Yao Qi <yao@codesourcery.com>
5487 * Makefile.in (ppc-linux.o): New rule.
5488 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
5489 * configure.ac: AC_CHECK_FUNCS(getauxval).
5490 * config.in: Re-generated.
5491 * configure: Re-generated.
5492 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
5494 * nat/ppc-linux.c: New file.
5495 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
5496 Call ppc64_64bit_inferior_p.
5498 2015-01-14 Yao Qi <yao@codesourcery.com>
5500 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
5502 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
5503 (PPC_FEATURE_HAS_DFP): Likewise.
5504 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
5505 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
5506 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
5507 Include "nat/ppc-linux.h".
5508 * nat/ppc-linux.h: New file.
5509 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
5511 2015-01-14 Pedro Alves <palves@redhat.com>
5514 * breakpoint.c: Include "interps.h".
5515 (bpstat_do_actions_1): Also check whether the interpreter is
5518 2015-01-14 Pedro Alves <palves@redhat.com>
5521 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
5522 reinstall if the interpreter is sync.
5524 2015-01-13 Doug Evans <dje@google.com>
5526 * objfiles.c (objfile_filename): New function.
5527 * objfiles.h (objfile_filename): Declare it.
5528 (objfile_name): Add function comment.
5529 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
5530 bfd file name (which may be realpath'd), and the original name.
5532 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5534 * NEWS: Create a new section for the next release branch.
5535 Rename the section of the current branch, now that it has
5538 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5540 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
5541 * version.in: Bump version to 7.9.50.DATE-cvs.
5543 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5545 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
5546 Remove trailing new-line in argument of call to warning.
5548 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5550 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
5551 new-line in argument of call to "warning".
5553 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5555 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
5556 in static block, then try searching for primitive types.
5558 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
5560 * top.h (gdb_add_history): Declare.
5561 * top.c (command_count): New variable.
5562 (gdb_add_history): New function.
5563 (gdb_safe_append_history): New static function.
5564 (quit_force): Call it.
5565 (command_line_input): Use gdb_add_history instead of
5567 * event-top.c (command_line_handler): Likewise.
5569 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
5572 * darwin-nat.c: Replace <machine/setjmp.h> #include by
5573 <setjmp.h> #include.
5575 2015-01-11 Doug Evans <xdje42@gmail.com>
5577 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
5579 2015-01-11 Doug Evans <xdje42@gmail.com>
5582 * NEWS: The "maint demangle" command is renamed as "demangle".
5583 * demangle.c: #include cli/cli-utils.h, language.h.
5584 (demangle_command): New function.
5585 (_initialize_demangle): Add new command "demangle".
5586 * maint.c (maintenance_demangle): Stub out.
5587 (_initialize_maint_cmds): Update help text for "maint demangle",
5588 and mark as deprecated.
5590 2015-01-11 Mark Kettenis <kettenis@gnu.org>
5592 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
5593 inferior_thread is a function.
5595 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
5597 * Makefile.in (.y.c): Don't munge yacc's #line
5600 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
5602 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
5603 to prompt for input.
5604 * tui/tui-hooks.c (tui_query_hook): Remove.
5605 (tui_install_hooks): Don't set deprecated_query_hook.
5606 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
5607 height calculation. Always update the command window's cur_line.
5609 2015-01-09 Pedro Alves <palves@redhat.com>
5611 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
5613 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
5615 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
5616 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
5618 (check_stopped_by_watchpoint): New function.
5619 (save_sigtrap): Reimplement.
5620 (linux_nat_stopped_by_watchpoint): Adjust.
5621 (linux_nat_lp_status_is_event): Delete.
5622 (stop_wait_callback): Only call save_sigtrap after storing the
5624 (status_callback): If the thread had been stopped for a breakpoint
5625 that has since been removed, discard the event and resume the LWP.
5626 (count_events_callback, select_event_lwp_callback): Use
5627 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
5628 (cancel_breakpoint): Rename to ...
5629 (check_stopped_by_breakpoint): ... this. Record whether the LWP
5630 stopped for a software breakpoint or hardware breakpoint.
5631 (select_event_lwp): Only give preference to the stepping LWP in
5632 all-stop mode. Adjust comments.
5633 (stop_and_resume_callback): Remove references to new_pending_p.
5634 (linux_nat_filter_event): Likewise. Leave exit events of the
5635 leader thread pending here. Handle signal short circuiting here.
5636 Only call save_sigtrap after storing the pending waitstatus.
5637 (linux_nat_wait_1): Remove 'retry' label. Remove references to
5638 new_pending. Don't handle leaving events the caller is not
5639 interested in pending here, nor handle signal short-circuiting
5640 here. Also give equal priority to all LWPs that have had events
5641 in non-stop mode. If reporting a software breakpoint event,
5642 unadjust the LWP's PC.
5643 * linux-nat.h (enum lwp_stop_reason): New.
5644 (struct lwp_info) <stop_pc>: New field.
5645 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
5646 (struct lwp_info) <stop_reason>: New field.
5647 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
5649 2015-01-09 Pedro Alves <palves@redhat.com>
5651 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
5652 Set the LWP's 'resumed' flag.
5654 2015-01-09 Pedro Alves <palves@redhat.com>
5656 * linux-nat.c (linux_resume_one_lwp): New function.
5657 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
5658 (linux_nat_resume): Use lwp_status_pending_p and
5659 linux_resume_one_lwp.
5660 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
5661 (linux_handle_extended_wait): Use linux_resume_one_lwp.
5662 (status_callback, running_callback): Use lwp_status_pending_p.
5663 (lwp_status_pending_p): New function.
5664 (stop_and_resume_callback): Use lwp_status_pending_p.
5665 (linux_nat_filter_event): Use linux_resume_one_lwp.
5666 (linux_nat_wait_1): Always use status_callback to look for an LWP
5667 with a pending status. Use linux_resume_one_lwp.
5668 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
5669 linux_resume_one_lwp.
5671 2015-01-09 Pedro Alves <palves@redhat.com>
5673 * breakpoint.c (bp_location_inserted_here_p): New function,
5674 factored out from ...
5675 (breakpoint_inserted_here_p): ... here. Use
5676 ALL_BP_LOCATIONS_AT_ADDR.
5677 (software_breakpoint_inserted_here_p): Use
5678 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
5680 2014-01-09 Pedro Alves <palves@redhat.com>
5682 Skip enabling event reporting if the kernel supports
5684 * linux-thread-db.c: Include "nat/linux-ptrace.h".
5685 (thread_db_use_events): New function.
5686 (try_thread_db_load_1): Check thread_db_use_events before enabling
5688 (update_thread_state): New function.
5689 (attach_thread): Use it. Check thread_db_use_events before
5690 enabling event reporting.
5691 (thread_db_detach): Check thread_db_use_events before disabling
5693 (find_new_threads_callback): Check thread_db_use_events before
5694 enabling event reporting. Update the thread's state if not using
5695 libthread_db events.
5697 2015-01-09 Pedro Alves <palves@redhat.com>
5699 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
5700 about to wait for is > 0.
5701 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
5702 the kernel thread ID is -1.
5704 2015-01-09 Pedro Alves <palves@redhat.com>
5706 * linux-nat.c (attach_proc_task_lwp_callback): New function.
5707 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
5708 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
5709 ptrace option flags.
5710 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
5712 * nat/linux-procfs.c: Include <dirent.h>.
5713 (linux_proc_get_int): New parameter "warn". Handle it.
5714 (linux_proc_get_tgid): Adjust.
5715 (linux_proc_get_tracerpid): Rename to ...
5716 (linux_proc_get_tracerpid_nowarn): ... this.
5717 (linux_proc_pid_get_state): New function, factored out from
5718 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
5720 (linux_proc_pid_is_gone): New function.
5721 (linux_proc_pid_is_stopped): Adjust.
5722 (linux_proc_pid_is_zombie_maybe_warn)
5723 (linux_proc_pid_is_zombie_nowarn): New functions.
5724 (linux_proc_pid_is_zombie): Use
5725 linux_proc_pid_is_zombie_maybe_warn.
5726 (linux_proc_attach_tgid_threads): New function.
5727 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
5728 (linux_proc_get_tracerpid): Rename to ...
5729 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
5730 (linux_proc_pid_is_gone): New declaration.
5731 (linux_proc_pid_is_zombie): Update comment.
5732 (linux_proc_pid_is_zombie_nowarn): New declaration.
5733 (linux_proc_attach_lwp_func): New typedef.
5734 (linux_proc_attach_tgid_threads): New declaration.
5735 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
5736 use nowarn functions.
5737 (linux_ptrace_attach_fail_reason_string): Move here from
5738 gdbserver/linux-low.c and rename.
5739 (ptrace_supports_feature): If the current ptrace options are not
5740 known yet, check them now, instead of asserting.
5741 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
5744 2015-01-09 Pedro Alves <palves@redhat.com>
5746 * linux-thread-db.c (thread_db_find_new_threads_silently)
5747 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
5748 (find_new_threads_once): Print debug output on gdb_stdlog.
5750 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
5751 Pedro Alves <palves@redhat.com>
5753 * compile/compile.c: Include "gdb_wait.h".
5754 (do_rmdir): Check return value, and free 'zap'.
5756 2015-01-08 Pedro Alves <palves@redhat.com>
5757 Yao Qi <yao@codesourcery.com>
5759 * dwarf2loc.c (indirect_pieced_value): Don't call
5760 gdb_sign_extend. Call extract_signed_integer instead.
5761 * utils.c (gdb_sign_extend): Remove.
5762 * utils.h (gdb_sign_extend): Remove declaration.
5764 2015-01-07 Pierre Muller <muller@sourceware.org>
5767 * stabsread.c (define_symbol): Set language for C++ special symbols.
5769 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
5771 * inflow.c (initial_gdb_ttystate): Tweak comment.
5773 2015-01-07 Joel Brobecker <brobecker@adacore.com>
5775 * inflow.c (set_initial_gdb_ttystate): Add empty line after
5776 comment documenting function.
5778 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
5780 * terminal.h (set_initial_gdb_ttystate): Declare.
5781 * inflow.c (initial_gdb_ttystate): New static variable.
5782 (set_initial_gdb_ttystate): New setter.
5783 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
5784 instead of our current terminal state.
5785 * top.c (gdb_init): Call set_initial_gdb_ttystate.
5787 2015-01-07 Joel Brobecker <brobecker@adacore.com>
5789 * guile/scm-type.c (tyscm_array_1): Add comment.
5790 * python/py-type.c (typy_array_1): Add comment.
5792 2015-01-06 Joel Brobecker <brobecker@adacore.com>
5794 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
5795 error if N2 is equal to N1 - 1.
5797 2015-01-06 Joel Brobecker <brobecker@adacore.com>
5799 * python/py-type.c (typy_array_1): Do not raise negative-length
5800 exception if N2 is equal to N1 - 1.
5802 2015-01-03 Doug Evans <xdje42@gmail.com>
5804 * c-exp.y: Whitespace cleanup.
5805 (classify_inner_name): Remove extra ;.
5807 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
5809 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
5812 2015-01-02 Doug Evans <dje@google.com>
5814 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
5816 2015-01-02 Doug Evans <dje@google.com>
5818 * symtab.h (struct symbol): Fix typo in comment.
5820 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5822 Update year range in copyright notice of all files.
5824 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5826 * top.c (print_gdb_version): Update copyright year to 2015.
5828 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5830 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
5832 For older changes see ChangeLog-2014.
5838 version-control: never