1 2013-10-01 Jerome Guitton <guitton@adacore.com>
3 Checked in by Joel Brobecker <brobecker@adacore.com>
4 * system-gdbinit/elinos.py (get_elinos_environment): Return an
5 incomplete dictionnary instead of None in case of missing
7 (elinos_init): in case of an incomplete environment, best
8 effort to load system libraries instead of abort.
10 2013-10-01 Joel Brobecker <brobecker@adacore.com>
12 * ada-lang.c (ada_has_this_exception_support): Ignore
13 mst_solib_trampoline minimal symbols.
15 2013-09-30 Tristan Gingold <gingold@adacore.com>
17 * i386-darwin-nat.c (darwin_complete_target): Install methods for
19 (i386_darwin_dr_set): Support 32 and 64 bit states.
20 (i386_darwin_dr_get): Likewise.
21 (i386_darwin_dr_set_control): Make static.
22 (i386_darwin_dr_set_addr, i386_darwin_dr_get_addr)
23 (i386_darwin_dr_get_status, i386_darwin_dr_get_control): Likewise.
25 2013-09-30 Luis Machado <lgustavo@codesourcery.com>
27 * aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid.
28 Replace TIDGET with ptid_get_lwp.
29 Replace GET_LWP with ptid_get_lwp.
30 * aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove.
31 Replace BUILD_THREAD with ptid_build.
32 Replace BUILD_LWP with ptid_build.
33 Replace PIDGET with ptid_get_pid.
34 Replace TIDGET with ptid_get_lwp.
35 * alphabsd-nat.c: Replace PIDGET with ptid_get_pid.
36 * amd64-linux-nat.c: Replace PIDGET with ptid_get_pid.
37 Replace TIDGET with ptid_get_lwp.
38 * amd64bsd-nat.c: Replace PIDGET with ptid_get_pid.
39 * arm-linux-nat.c: Replace PIDGET with ptid_get_pid.
40 Replace TIDGET with ptid_get_lwp.
41 Replace GET_LWP with ptid_get_lwp.
42 * armnbsd-nat.c: Replace PIDGET with ptid_get_pid.
44 * breakpoint.c: Likewise.
45 * common/ptid.c (ptid_is_pid): Condense check for
46 null_ptid and minus_one_ptid.
47 (ptid_lwp_p): New function.
48 (ptid_tid_p): New function.
49 * common/ptid.h: Update comments for accessors.
50 (ptid_lwp_p): New prototype.
51 (ptid_tid_p): New prototype.
52 * defs.h (PIDGET, TIDGET, MERGEPID): Do not define.
53 * gcore.c: Replace PIDGET with ptid_get_pid.
54 * gdbthread.h: Likewise.
55 * gnu-nat.c: Likewise.
56 * hppa-linux-nat.c: Replace PIDGET with ptid_get_pid.
57 Replace TIDGET with ptid_get_lwp.
58 * hppabsd-nat.c: Replace PIDGET with ptid_get_pid.
59 * hppanbsd-nat.c: Likewise.
60 * i386-linux-nat.c: Replace PIDGET with ptid_get_pid.
61 Replace TIDGET with ptid_get_lwp.
62 * i386bsd-nat.c: Replace PIDGET with ptid_get_pid.
63 * ia64-linux-nat.c: Replace PIDGET with ptid_get_pid.
65 * inferior.h: Likewise.
68 * linux-fork.c: Likewise.
69 * linux-nat.c: Replace PIDGET with ptid_get_pid.
70 Replace GET_PID with ptid_get_pid.
71 Replace is_lwp with ptid_lwp_p.
72 Replace GET_LWP with ptid_get_lwp.
73 Replace BUILD_LWP with ptid_build.
75 2013-09-28 Mike Frysinger <vapier@gentoo.org>
77 * common/linux-btrace.c: Move sys/syscall.h out of the
78 HAVE_LINUX_PERF_EVENT_H check and wrap it in HAVE_SYS_SYSCALL_H.
79 Also check for SYS_perf_event_open before attempting to buid.
81 2013-09-27 Doug Evans <dje@google.com>
83 * dwarf2read.c (dwarf2_section_info): Add comment.
84 (dwp_file): Split loaded_cutus into loaded_cus, loaded_tus.
86 (dwarf2_section_empty_p): Rename arg from "info" to "section".
87 (dwarf2_read_section): Delete unused local "header". Add section
88 name to error message.
89 (create_dwo_in_dwp): Tweak comment.
90 (MAX_NR_DWO_SECTIONS): Combine count of .debug_macro + .debug_macinfo.
92 * dwarf2read.c (die_reader_specs): Tweak comment.
93 (get_section_bfd_owner, get_section_bfd_section): New functions.
94 (get_section_name, get_section_file_name): New functions.
95 (get_section_id, get_section_flags): New functions.
96 (*): Use new functions to access section fields.
98 * dwarf2read.c (struct dwo_file): Add/tweak comments.
99 (lookup_dwo_unit_in_dwp): Renamed from lookup_dwo_in_dwp. Remove
100 arg "htab". All callers updated.
101 (create_debug_types_hash_table): Remove redundant copy of
103 (create_dwo_in_dwp): Tweak comments.
104 (read_str_index): Tweak comment. Record dwarf form name in static
107 2013-09-27 Pedro Alves <palves@redhat.com>
109 * remote.h (REMOTE_SYSROOT_PREFIX): New define.
110 (remote_filename_p): Add comment.
111 * remote.c (remote_filename_p): Adjust to use
112 REMOTE_SYSROOT_PREFIX.
113 * solib.c (solib_find): When deciding whether we need to add a
114 directory separator, check whether the sysroot is "remote:"
115 instead of checking whether the patch has a drive spec. Add
118 2013-09-27 Pedro Alves <palves@redhat.com>
120 * remote.c (struct stop_reply) <solibs_changed, replay_event>:
122 (remote_parse_stop_reply): Adjust, setting event->ws.kind
125 2013-09-26 Jan Kratochvil <jan.kratochvil@redhat.com>
127 Fix set debug frame output.
128 * frame.c (fprint_frame_type): Add TAILCALL_FRAME entry. Move
129 SENTINEL_FRAME entry lower to match enum frame_type order.
131 2013-09-26 Pierre Muller <muller@sourceware.org>
133 Replace constant values 8 to 15 by AMD64_R8_REGNUM to
134 AMD64_R15_REGNUM when a register index is expected.
135 * amd64-windows-tdep.c (amd64_windows_dummy_call_integer_regs):
137 * amd64-tdep.c (amd64_dwarf_regmap): Ditto.
138 (amd64_push_arguments): Substitute in integer_regnum array.
140 2013-09-25 Doug Evans <dje@google.com>
142 * objfiles.c (allocate_objfile): Move comment to better place.
144 New option "set debug symfile on".
145 * NEWS: Mention "set debug symfile".
146 * Makefile.in (SFILES): Add symfile-debug.c.
147 (COMMON_OBS): Add symfile-debug.o.
148 * elfread.c (elf_symfile_read): Use objfile_set_sym_fns to set the
149 objfile's symbol functions.
150 * objfiles.h (objfile_set_sym_fns): Declare.
151 * symfile-debug.c: New file.
152 * symfile.c (syms_from_objfile_1): Use objfile_set_sym_fns to set the
153 objfile's symbol functions.
154 (reread_symbols): Ditto.
156 * symfile.h (struct sym_fns): Delete member "sym_flavour".
158 (add_symtab_fns): Update prototype.
159 * symfile.c (sym_fns_ptr): Delete. Replace with ...
160 (registered_sym_fns): ... this.
161 (symtab_fns): Update.
162 (add_symtab_fns): New arg "flavour". All callers updated.
163 (find_sym_fns): Rewrite to use new sym_fns registry.
165 * symfile.h (struct sym_fns): Add "objfile" argument to
166 sym_read_linetable. All uses updated.
168 * symtab.c (domain_name, search_domain_name): New functions.
169 * symtab.h (domain_name, search_domain_name): Declare.
171 * symfile.h (struct quick_symbol_functions): Reorg arg list of
172 map_matching_symbols so objfile is first. All uses updated.
173 * dwarf2read.c (dw2_map_matching_symbols): Update signature.
174 * psymtab.c (map_matching_symbols_psymtab): Update signature.
176 2013-09-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
179 * solib-svr4.c (svr4_read_so_list): Skip the vDSO when reading
182 2013-09-24 Doug Evans <dje@google.com>
184 * objfiles.c (free_objfile): Move comment.
186 2013-09-24 Joel Brobecker <brobecker@adacore.com>
188 * ada-exp.y (string_to_operator): Delete.
189 (dummy_string_to_ada_operator): Delete.
191 2013-09-24 Joel Brobecker <brobecker@adacore.com>
194 * i386-tdep.h (enum amd64_reg_class): New, moved here from
196 (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
197 call_dummy_integer_regs, and classify.
198 * amd64-tdep.h (amd64_classify): Add declaration.
199 * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
200 (amd64_reg_class): Delete, moved to i386-tdep.h.
201 (amd64_classify): Make non-static. Move declaration to amd64-tdep.h.
202 Replace call to amd64_classify by call to tdep->classify.
203 (amd64_push_arguments): Get the list of registers to use for
204 passing integer parameters from the gdbarch tdep structure,
205 rather than using a hardcoded one. Replace calls to amd64_classify
206 by calls to tdep->classify.
207 (amd64_push_dummy_call): Get the register number used for
208 the "hidden" argument from tdep->call_dummy_integer_regs.
209 (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
210 and tdep->call_dummy_integer_regs. Set tdep->classify.
212 2013-09-24 Joel Brobecker <brobecker@adacore.com>
215 * i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
216 * amd64-tdep.c (amd64_push_arguments): Add handling of architectures
217 where tdep->memory_args_by_pointer is non-zero.
219 2013-09-24 Joel Brobecker <brobecker@adacore.com>
222 * i386-tdep.h (struct gdbarch_tdep): Add new field
223 integer_param_regs_saved_in_caller_frame.
224 * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
225 stack if tdep->integer_param_regs_saved_in_caller_frame is set.
227 2013-09-24 Joel Brobecker <brobecker@adacore.com>
229 * amd64-windows-tdep.c: #include "value.h"
230 (amd64_windows_classify): Delete.
231 (amd64_windows_passed_by_integer_register)
232 (amd64_windows_passed_by_xmm_register)
233 (amd64_windows_passed_by_pointer)
234 (amd64_windows_adjust_args_passed_by_pointer)
235 (amd64_windows_store_arg_in_reg, amd64_windows_push_arguments)
236 (amd64_windows_push_dummy_call): New functions.
237 (amd64_windows_init_abi): Remove setting of
238 tdep->call_dummy_num_integer_regs, tdep->call_dummy_integer_regs,
239 tdep->classify, tdep->memory_args_by_pointer and
240 tdep->integer_param_regs_saved_in_caller_frame.
241 Add call to set_gdbarch_push_dummy_call.
243 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
245 * dwarf2read.c (open_and_init_dwp_file): Try open_dwp_file also with
246 objfile->original_name.
248 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
250 Pass down original filename for objfile.
251 * coffread.c (coff_symfile_read): Update symbol_file_add_separate call.
252 * elfread.c (elf_symfile_read): Likewise.
253 * jit.c (jit_object_close_impl): Update allocate_objfile call, no
254 longer set ORIGINAL_NAME.
255 (jit_bfd_try_read_symtab): Update symbol_file_add_from_bfd call.
256 * jv-lang.c (get_dynamics_objfile): Update allocate_objfile call.
257 * machoread.c (macho_add_oso_symfile): Add parameter name. Update
258 symbol_file_add_from_bfd call.
259 (macho_symfile_read_all_oso): Update two macho_add_oso_symfile calls.
260 (macho_check_dsym): Add parameter filenamep. Change function comment.
262 (macho_symfile_read): New variable dsym_filename. Update
263 macho_check_dsym call. Use it for symbol_file_add_separate.
264 * objfiles.c (allocate_objfile): Add parameter name. New comment for
265 it. Use it for objfile->original_name.
266 (objfile_name): Return OBFD's filename, if available.
267 * objfiles.h (allocate_objfile): Add new parameter name.
268 * solib.c (solib_read_symbols): Update symbol_file_add_from_bfd call.
269 * symfile-mem.c (symbol_file_add_from_memory): Update
270 symbol_file_add_from_bfd call.
271 * symfile.c (read_symbols): Update symbol_file_add_separate call, new
273 (symbol_file_add_with_addrs): New parameter name, add function comment
274 for it. Remove variable name. Update allocate_objfile call.
275 (symbol_file_add_separate): New parameter name, add function comment
276 for it. Update symbol_file_add_with_addrs call.
277 (symbol_file_add_from_bfd): New parameter name. Update
278 symbol_file_add_with_addrs call.
279 (symbol_file_add): Update symbol_file_add_from_bfd call.
280 (reread_symbols): New variable original_name. Save
281 objfile->original_name by it.
282 * symfile.h (symbol_file_add_from_bfd, symbol_file_add_separate): Add
285 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
287 Code cleanup: Add objfile_name accessor function.
288 * ada-lang.c (is_known_support_routine): Use objfile_name.
289 * auto-load.c (source_gdb_script_for_objfile)
290 (auto_load_objfile_script): Likewise.
291 * coffread.c (coff_symtab_read, read_one_sym): Likewise.
292 * dbxread.c (dbx_symfile_read): Likewise.
293 * dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
294 * dwarf2loc.c (locexpr_describe_location_piece): Likewise.
295 * dwarf2read.c (dwarf2_get_dwz_file, dwarf2_read_index)
296 (dw2_symtab_iter_next, dw2_expand_symtabs_matching)
297 (lookup_dwp_signatured_type, lookup_dwo_unit)
298 (dwarf2_build_psymtabs_hard, scan_partial_symbols, process_queue)
299 (fixup_go_packaging, process_imported_unit_die, dwarf2_physname)
300 (read_import_statement, create_dwo_cu, open_and_init_dwp_file)
301 (lookup_dwo_cutu, read_call_site_scope, dwarf2_ranges_read)
302 (dwarf2_record_block_ranges, read_common_block, read_typedef)
303 (read_subrange_type, load_partial_dies, read_partial_die)
304 (read_addr_index_1, read_str_index, dwarf_decode_lines_1)
305 (die_containing_type, build_error_marker_type, lookup_die_type)
306 (follow_die_ref_or_sig, follow_die_ref, dwarf2_fetch_die_loc_sect_off)
307 (dwarf2_fetch_constant_bytes, follow_die_sig, get_signatured_type)
308 (get_DW_AT_signature_type, write_psymtabs_to_index)
309 (save_gdb_index_command): Likewise.
310 * elfread.c (find_separate_debug_file_by_buildid, elf_symfile_read):
312 * expprint.c (dump_subexp_body_standard): Likewise.
313 * gdbtypes.c (type_name_no_tag_or_error): Likewise.
314 * jit.c (jit_object_close_impl): Use the objfile field name renamed to
316 * linux-thread-db.c (try_thread_db_load_from_pdir_1): New variable
317 obj_name, use objfile_name for it, use the variable.
318 (try_thread_db_load_from_pdir, has_libpthread, thread_db_new_objfile):
320 * machoread.c (macho_symtab_read, macho_check_dsym)
321 (macho_symfile_relocate): Likewise.
322 * maint.c (maintenance_translate_address): Likewise.
323 * minidebug.c (find_separate_debug_file_in_section): Likewise.
324 * minsyms.c (install_minimal_symbols): Likewise.
325 * objfiles.c (allocate_objfile): Use the objfile field name renamed to
327 (filter_overlapping_sections): Use objfile_name.
328 (objfile_name): New function.
329 * objfiles.h (struct objfile): Rename field name to original_name.
330 (objfile_name): New prototype.
331 * printcmd.c (sym_info, address_info): Use objfile_name.
332 * probe.c (parse_probes, collect_probes, compare_probes)
333 (info_probes_for_ops): Likewise.
334 * progspace.c (clone_program_space): Likewise.
335 * psymtab.c (require_partial_symbols, dump_psymtab, allocate_psymtab)
336 (maintenance_info_psymtabs): Likewise.
337 * python/py-auto-load.c (gdbpy_load_auto_script_for_objfile)
338 (source_section_scripts): Likewise.
339 * python/py-objfile.c (objfpy_get_filename): Likewise.
340 * python/py-progspace.c (pspy_get_filename): Likewise.
341 * solib-aix.c (solib_aix_get_toc_value): Likewise.
342 * solib-som.c (match_main, som_solib_section_offsets): Likewise.
343 * solib.c (solib_read_symbols): Likewise.
344 * stabsread.c (scan_file_globals): Likewise.
345 * stap-probe.c (handle_stap_probe): Likewise.
346 * symfile.c (symbol_file_clear, separate_debug_file_exists)
347 (find_separate_debug_file_by_debuglink): Likewise.
348 (reread_symbols): Likewise. Use the objfile field name renamed to
350 (allocate_symtab): Use objfile_name.
351 * symmisc.c (print_symbol_bcache_statistics, print_objfile_statistics)
352 (dump_objfile, dump_msymbols, dump_symtab_1)
353 (maintenance_print_msymbols, maintenance_print_objfiles)
354 (maintenance_info_symtabs, maintenance_check_symtabs): Likewise.
355 * target.c (target_translate_tls_address, target_info): Likewise.
356 * xcoffread.c (xcoff_initial_scan): Make variable name const. Use
359 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
362 * probe.c (parse_probes): Rename variable objfile_name to
365 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
367 Remove solib-sunos.c.
368 * Makefile.in (ALLDEPFILES): Remove solib-sunos.c.
369 * config/m68k/obsd.mh (NATDEPFILES): Remove solib-sunos.o.
370 * objfiles.c (rt_common_objfile): Remove.
371 (free_objfile): Remove rt_common_objfile comparison.
372 * objfiles.h (rt_common_objfile): Remove.
373 * solib-sunos.c: Remove.
374 * symfile.c (reread_symbols): Remove solib-sunos.c comment.
376 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
378 Remove a.out NetBSD and OpenBSD hosts.
379 * NEWS (Removed native configurations): New.
380 * config/arm/nbsdaout.mh: Remove.
381 * config/i386/nbsdaout.mh: Remove.
382 * config/i386/obsdaout.mh: Remove.
383 * config/m68k/nbsdaout.mh: Remove.
384 * config/sparc/nbsdaout.mh: Remove.
385 * config/vax/nbsdaout.mh: Remove.
386 * configure.host (arm*-*-netbsd*, i[34567]86-*-netbsd*)
387 (i[34567]86-*-openbsd[0-2].*, i[34567]86-*-openbsd3.[0-3])
388 (m68*-*-netbsd*, sparc-*-netbsd*, vax-*-netbsd*): Add them to obsolete
390 (arm*-*-netbsd*, i[34567]86-*-netbsd*, i[34567]86-*-openbsd[0-2].*)
391 (i[34567]86-*-openbsd3.[0-3], m68*-*-netbsd*, sparc-*-netbsdaout*)
392 (sparc-*-netbsd*, vax-*-netbsd*): Remove.
394 2013-09-23 Tom Tromey <tromey@redhat.com>
396 * linespec.c (struct minsym_and_objfile): Remove.
397 (minsym_and_objfile_d): Remove.
398 (struct linespec, struct collect_info, linespec_parse_basic)
399 (convert_linespec_to_sals, linespec_parser_delete, decode_objc)
400 (compare_msymbols, find_method, find_function_symbols)
401 (find_linespec_symbols, struct collect_minsyms, compare_msyms)
402 (add_minsym, search_minsyms_for_name): Update.
404 2013-09-23 Andrew Burgess <aburgess@broadcom.com>
406 * regcache.c: Add include of valprint.h.
407 (dump_endian_bytes): Delete.
408 (regcache_dump): Use print_hex_chars not dump_endian_bytes.
410 2013-09-23 Andrew Burgess <aburgess@broadcom.com>
412 * sh64-tdep.c (sh64_do_fp_register): Use print_hex_chars.
414 2013-09-19 Pedro Alves <palves@redhat.com>
416 * breakpoint.c (remove_threaded_breakpoints): Skip non-user
419 2013-09-19 Pedro Alves <palves@redhat.com>
420 Thomas Schwinge <thomas@codesourcery.com>
421 Yue Lu <hacklu.newborn@gmail.com>
423 * gnu-nat.c (gnu_read_inferior, gnu_write_inferior): Make static.
424 Take a gdb_byte pointer instead of a char pointer.
426 * gnu-nat.c (gnu_xfer_memory): Adjust interface as
427 gnu_xfer_partial helper.
428 (gnu_xfer_partial): New function.
429 (gnu_target): Don't install a deprecated_xfer_memory hook.
430 Install a to_xfer_partial hook.
432 2013-09-19 Jan Kratochvil <jan.kratochvil@redhat.com>
435 * main.c (captured_main): Replace catch_command_errors by
436 catch_command_errors_const. Twice.
437 * symfile.c (symbol_file_add_main_1): Make args parameter const.
438 (symbol_file_add): Make name parameter const.
439 (symbol_file_add_main, symbol_file_add_main_1): Make args parameter const.
440 (symfile_bfd_open): Make name parameter const, rename it to cname. Add
441 variable name. Change their usage accordingly.
442 * symfile.h (symbol_file_add, symfile_bfd_open): Make first parameter
444 (symbol_file_add_main): Make args parameter const.
446 2013-09-18 Raunaq Bathija <raunaq12@in.ibm.com>
447 Ulrich Weigand <uweigand@de.ibm.com>
449 * xcoffread.c (struct coff_symbol): Use CORE_ADDR as type
451 (read_xcoff_symtab): Use CORE_ADDR as type of fcn_start_addr.
453 2013-09-18 Pedro Alves <palves@redhat.com>
454 Yue Lu <hacklu.newborn@gmail.com>
456 * gnu-nat.c (inf_validate_procs, gnu_wait, gnu_resume)
457 (gnu_create_inferior)
458 (gnu_attach, gnu_thread_alive, gnu_pid_to_str, cur_thread)
459 (set_sig_thread_cmd): Use the lwpid field of ptids to
460 store/extract thread ids instead of the tid field.
461 * i386gnu-nat.c (gnu_fetch_registers): Adjust.
463 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
465 * infcmd.c (default_print_one_register_info): Add detection of
466 optimized out values.
467 (default_print_registers_info): Switch to using
468 get_frame_register_value.
470 2013-09-18 Markus Metzger <markus.t.metzger@intel.com>
472 * infrun.c (handle_inferior_event): Check if we know the
473 function start address before setting a resume breakpoint.
475 2013-09-18 Pedro Alves <palves@redhat.com>
477 * gnu-nat.c (set_sig_thread_cmd): Compare the thread's ptid to
478 minus_one_ptid instead of looking at the ptid's tid field and
479 comparing that to -1.
481 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
483 * main.h (get_gdb_program_name): Remove extra whitespace.
485 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
487 * main.h (get_gdb_program_name): Add declaration.
488 * main.c (get_gdb_program_name): Add definition.
490 2013-09-17 Doug Evans <dje@google.com>
492 * dwarf2read.c: Move definitions of complaint functions to after
493 forward declarations of local functions.
495 2013-09-17 Muhammad Waqas <mwaqas@codesourcery.com>
496 Pedro Alves <palves@redhat.com>
499 * breakpoint.c (remove_threaded_breakpoints): New function.
500 (_initialize_breakpoint): Attach remove_threaded_breakpoints
501 as thread_exit observer.
503 2013-09-17 Pedro Alves <palves@redhat.com>
506 * ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
507 * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
508 * corelow.c (core_open):
509 * frame.h (print_stack_frame, print_frame_info): New
510 'set_current_sal' parameter.
511 * infcmd.c (finish_command, kill_command): Adjust call to
513 * inferior.c (inferior_command): Likewise.
514 * infrun.c (normal_stop): Likewise.
515 * linux-fork.c (linux_fork_context): Likewise.
516 * record-full.c (record_full_goto_entry, record_full_restore):
518 * remote-mips.c (common_open): Likewise.
519 * stack.c (print_stack_frame): New 'set_current_sal' parameter.
521 (print_frame_info): New 'set_current_sal' parameter. Set the last
522 displayed sal depending on the new paremeter instead of looking at
524 (backtrace_command_1, select_and_print_frame, frame_command)
525 (current_frame_command, up_command, down_command): Adjust call to
527 * thread.c (print_thread_info, restore_selected_frame)
528 (do_captured_thread_select): Adjust call to print_stack_frame.
529 * tracepoint.c (tfind_1): Likewise.
530 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
531 (mi_cmd_stack_info_frame): Likewise.
532 * mi/mi-interp.c (mi_on_normal_stop): Likewise.
533 * mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.
535 2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
537 * value.c (isvoid_internal_fn): Replace "parameter" with
540 2013-09-16 Stan Shebs <stan@codesourcery.com>
542 * README: Update references to writing code for GDB.
543 * configure.ac (build_warnings): Remove obsolete comment.
544 * configure: Regenerate.
545 * gdbarch.sh: Remove references to gdbint.texinfo.
546 * gdbarch.h: Regenerate.
547 * gdbtypes.c (objfile_type): Remove comments referencing internals
550 2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
552 * NEWS: Mention new convenience function $_isvoid.
553 * value.c (isvoid_internal_fn): New function.
554 (_initialize_values): Add new convenience function $_isvoid.
556 2013-09-16 Pierre Muller <muller@sourceware.org>
558 * arm-linux-tdep.c: Add "elf/common.h" header.
559 Remove AT_HWCAP macro definintion as it is provided in
561 * s390-tdep.c: Remove system header <elf.h>
562 Add "elf/common.h" header for AT_HWCAP definition.
563 (s390_core_read_description): Use correct CORE_ADDR
564 for hwcap local variable used as third parameter
565 of function target_auxv_search.
567 2013-09-14 Pierre Muller <muller@sourceware.org>
568 Tom Tromey <tromey@redhat.com>
569 Pedro Alves <palves@redhat.com>
571 * common/filestuff.c (gdb_fopen_cloexec): Do not try to use "e"
572 mode if operating system doesn't know O_CLOEXEC.
574 2013-09-13 Jan Kratochvil <jan.kratochvil@redhat.com>
577 * symfile.c (reread_symbols): Move variable obfd_filename to a more
580 2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
582 * NEWS: Mention TDB support.
583 * features/s390-tdb.xml: New file.
584 * features/s390-te-linux64.xml: New file.
585 * features/s390x-te-linux64.xml: New file.
586 * features/Makefile (WHICH): Add new tdescs above.
587 (s390-te-linux64-expedite): Set.
588 (s390x-te-linux64-expedite): Set.
589 * features/s390-te-linux64.c: New file (generated).
590 * features/s390x-te-linux64.c: New file (generated).
591 * regformats/s390-te-linux64.dat: New file (generated).
592 * regformats/s390x-te-linux64.dat: New file (generated).
593 * s390-tdep.h (HWCAP_S390_HIGH_GPRS): Define.
594 (HWCAP_S390_TE): Likewise.
595 (S390_TDB_DWORD0_REGNUM): Likewise.
596 (S390_TDB_DWORD0_REGNUM): Likewise.
597 (S390_TDB_ABORT_CODE_REGNUM): Likewise.
598 (S390_TDB_CONFLICT_TOKEN_REGNUM): Likewise.
599 (S390_TDB_ATIA_REGNUM): Likewise.
600 (S390_TDB_R0_REGNUM): Likewise.
601 (S390_TDB_R1_REGNUM): Likewise.
602 (S390_TDB_R2_REGNUM): Likewise.
603 (S390_TDB_R3_REGNUM): Likewise.
604 (S390_TDB_R4_REGNUM): Likewise.
605 (S390_TDB_R5_REGNUM): Likewise.
606 (S390_TDB_R6_REGNUM): Likewise.
607 (S390_TDB_R7_REGNUM): Likewise.
608 (S390_TDB_R8_REGNUM): Likewise.
609 (S390_TDB_R9_REGNUM): Likewise.
610 (S390_TDB_R10_REGNUM): Likewise.
611 (S390_TDB_R11_REGNUM): Likewise.
612 (S390_TDB_R12_REGNUM): Likewise.
613 (S390_TDB_R13_REGNUM): Likewise.
614 (S390_TDB_R14_REGNUM): Likewise.
615 (S390_TDB_R15_REGNUM): Likewise.
616 (S390_NUM_REGS): Increase.
617 (S390_IS_TDBREGSET_REGNUM): New macro.
618 (s390_regmap_tdb): Declare.
619 (s390_sizeof_tdbregset): Define.
620 (tdesc_s390_te_linux64): Declare.
621 (tdesc_s390x_te_linux64): Likewise.
622 * s390-tdep.c: Add includes for "auxv.h", <elf.h>,
623 "features/s390-te-linux64.c", and "features/s390x-te-linux64.c".
624 (s390_regmap_tdb): New regmap.
625 (s390_supply_tdb_regset): New function.
626 (s390_tdb_regset): New regset.
627 (s390_linux64v2_regset_sections): Add TDB regset to list.
628 (s390x_linux64v2_regset_sections): Likewise.
629 (s390_regset_from_core_section): Recognize TDB core note section.
630 (s390_core_read_description): If HWCAP indicates TE support,
631 select tdesc_s390_te_linux64 or tdesc_s390_s390x_te_linux64.
632 (s390_gdbarch_init): Handle TDB regset.
633 (_initialize_s390_tdep): Initialize new tdescs.
634 * s390-nat.c (HWCAP_S390_HIGH_GPRS): Remove define.
635 (have_regset_tdb): New variable.
636 (s390_native_supply): Support register invalidation.
637 (fetch_regset): Invalidate registers if ptrace yields ENODATA.
638 (check_regset): Treat ENODATA as "regset exists".
639 (s390_linux_fetch_inferior_registers): Add TDB.
640 (s390_read_description): Check for TDB existence and select
642 * gdbserver/Makefile.in (clean): Add removal of new makefile
644 (s390-te-linux64.c): New makefile target.
645 (s390x-te-linux64.c): Likewise.
646 * gdbserver/configure.srv (srv_regobj): Append new objects
647 s390-te-linux64.o and s390x-te-linux64.o.
648 (srv_xmlfiles): Append new files s390-te-linux64.xml,
649 s390x-te-linux64.xml, and s390-tdb.xml.
650 * gdbserver/linux-s390-low.c (init_registers_s390_te_linux64): New
652 (tdesc_s390_te_linux64): Likewise.
653 (init_registers_s390x_te_linux64): Likewise.
654 (tdesc_s390x_te_linux64): Likewise.
655 (s390_check_regset): Treat ENODATA as "regset exists".
656 (s390_arch_setup): Add TDB regset support.
657 (initialize_low_arch): Initialize registers for new tdescs.
659 2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
661 * s390-tdep.h (S390_IS_GREGSET_REGNUM): New macro.
662 (S390_IS_FPREGSET_REGNUM): New macro.
663 * s390-tdep.c (s390_dwarf_regmap): Make const.
664 (regnum_is_gpr_full): New function for replacing repeated code.
665 (s390_pseudo_register_name): Use it.
666 (s390_pseudo_register_type): Likewise.
667 (s390_pseudo_register_read): Likewise.
668 (s390_pseudo_register_write): Likewise.
669 (s390_unwind_pseudo_register): Likewise.
670 (s390_regmap_gregset): New format for regmap.
671 (s390x_regmap_gregset): Likewise.
672 (s390_regmap_fpregset): Likewise.
673 (s390_regmap_upper): Likewise.
674 (s390_regmap_last_break): Likewise.
675 (s390_regmap_system_call): Likewise.
676 (s390_supply_regset): Adjust to new regmap format.
677 (s390_collect_regset): Likewise.
678 * s390-nat.c (s390_native_supply): Adjust to new regmap format.
679 (s390_native_collect): Likewise.
680 (supply_gregset): Likewise.
681 (fill_gregset): Likewise.
682 (supply_fpregset): Likewise.
683 (fill_fpregset): Likewise.
684 (fetch_regset): Likewise.
685 (store_regset): Likewise.
686 (s390_linux_fetch_inferior_registers): Likewise.
687 (s390_linux_fetch_inferior_registers): Likewise.
689 2013-09-12 Andrew Pinski <apinski@cavium.com>
691 * aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Zero out regs.
693 2013-09-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
695 * config/s390/s390.mh (NATDEPFILES): Add linux-waitpid.o.
697 2013-09-09 Andrew Burgess <aburgess@broadcom.com>
699 * top.c (quit_confirm): Remove use of deprecated_init_ui_hook.
701 2013-09-06 Pedro Alves <palves@redhat.com>
703 * remote-sim.c (dump_mem, gdbsim_fetch_register)
704 (gdbsim_store_register, gdbsim_kill, gdbsim_load)
705 (gdbsim_create_inferior, gdbsim_open, gdbsim_close)
706 (gdbsim_detach, gdbsim_resume_inferior, gdbsim_wait)
707 (gdbsim_files_info, gdbsim_mourn_inferior): Send debug output to
710 2013-09-06 Pedro Alves <palves@redhat.com>
712 * remote-sim.c (dump_mem): Constify buf parameter.
713 gdbsim_xfer_inferior_memory): Rename to ...
714 (gdbsim_xfer_memory): ... this. Adjust interface as
715 target_xfer_partial helper.
716 (gdbsim_xfer_partial): New function.
717 (init_gdbsim_ops): Don't install a deprecated_xfer_memory hook.
718 Install a to_xfer_partial hook. Send output to gdb_stdlog.
720 2013-09-06 Pedro Alves <palves@redhat.com>
722 * remote-sim.c (gdbsim_xfer_inferior_memory): Use
723 host_address_to_string, and send debug output to gdb_stdlog.
725 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
727 * Makefile.in (ALL_TARGET_OBS): Add cris-linux-tdep.o.
728 * configure.tgt: Add cris-linux-tdep.o and linux-tdep.o to
729 gdb_target_obs for cris target.
730 * cris-tdep.c (struct gdbarch_tdep): Move to cris-tdep.h.
731 (cris_gdbarch_init): Move calls to
732 set_gdbarch_fetch_tls_load_module_address and
733 set_solib_svr4_fetch_link_map_offsets to cris-linux-tdep.c.
734 Add call to gdbarch_init_osabi.
735 * cris-linux-tdep.c: New file.
736 * cris-tdep.h: New file.
738 2013-09-06 Andrew Burgess <aburgess@broadcom.com>
740 * tui/tui-io.c (tui_initialize_io): Remove legacy comment referring
741 to deprecated_init_ui_hook.
743 2013-09-06 Andrew Burgess <aburgess@broadcom.com>
745 * cli/cli-interp.c (_initialize_cli_interp): Add a
746 command_loop_proc to interp_procs.
747 * event-top.c (cli_command_loop): Change signature to match
748 interp_command_loop_ftype.
749 * event-top.h (cli_command_loop): Same.
750 * interps.c (interp_new): Require every interpreter to have a
752 (current_interp_command_loop): Just call the command_loop_proc on
753 the current interpreter.
754 * tui/tui-interp.c (_initialize_tui_interp): Add a
755 command_loop_proc to interp_procs.
757 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
759 * cris-tdep.c (cris_gdbarch_init): Add call to
760 get_gdbarch_fetch_tls_load_module_address.
762 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
764 * cris-tdep.c (cris_elf_greg_t): Rename from elf_greg_t.
765 (cris_elf_gregset_t): Rename from elf_gregset_t.
766 (crisv32_elf_gregset_t): Adjust.
767 (cris_supply_gregset, fetch_core_registers): Adjust.
769 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
771 * cris-tdep.c (elf_greg_t): Change typedef to unsigned char[4]
773 2013-09-05 Andrew Burgess <aburgess@broadcom.com>
775 * defs.h (deprecated_command_loop_hook): Remove, including
776 references in comments.
777 * interps.c (current_interp_command_loop): No longer use
778 deprecated_command_loop_hook.
779 (clear_interpreter_hooks): Remove deprecated_command_loop_hook
781 * top.c (deprecated_command_loop_hook): Remove.
783 2013-09-05 Pedro Alves <palves@redhat.com>
785 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): 'dwarf_regnum'
786 local is now int instead of ULONGEST. Print it with %d
789 2013-09-05 Tristan Gingold <gingold@adacore.com>
791 * MAINTAINERS: Remove avr maintainership.
793 2013-09-05 Pedro Alves <palves@redhat.com>
795 * findvar.c (value_of_register): Rework in terms of
796 value_of_register_lazy.
798 2013-09-05 Muhammad Bilal <mbilal@codesourcery.com>
800 * symfile.c (add_symbol_file_command): Remove trailing
801 whitespaces and blank line after comment.
803 2013-09-05 Pedro Alves <palves@redhat.com>
805 * tui/tui-regs.c (tui_register_format): Don't look at the
806 register's name here. Return string representing register
807 value instead of storing it in the data element.
808 (tui_get_register): Compare register string representations
809 instead of register value states and contents.
811 2013-09-05 Pedro Alves <palves@redhat.com>
814 * tui/tui-regs.c (tui_show_registers): Show registers of the
815 selected frame, not the current frame.
817 2013-09-05 Ricard Wanderlof <ricardw@axis.com>
819 * MAINTAINERS (Write After Approval): Add myself to the list.
821 2013-09-04 Doug Evans <dje@google.com>
823 * dwarf2read.c (queue_and_load_all_dwo_tus): New function.
824 (queue_and_load_dwo_tu): New function.
825 (lookup_dwo_signatured_type): Set per_cu.tu_read.
826 (maybe_queue_comp_unit): Rename this_cu argument to dependent_cu.
827 Make dependent_cu optional.
828 (dw2_do_instantiate_symtab): If we just loaded a CU from a DWO,
829 and an older .gdb_index is in use, queue and load all its TUs too.
831 2013-09-04 Jan Kratochvil <jan.kratochvil@redhat.com>
833 Code cleanup: Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH.
834 * cli/cli-cmds.c (find_and_open_script): Add OPF_RETURN_REALPATH to
835 variable search_flags.
836 * defs.h (OPF_DISABLE_REALPATH): Rename to ...
837 (OPF_RETURN_REALPATH): ... here.
838 * dwarf2read.c (try_open_dwop_file): Set OPF_RETURN_REALPATH for flags.
839 * exec.c (exec_file_attach): Remove OPF_DISABLE_REALPATH from openp
841 * nto-tdep.c (nto_find_and_open_solib): Add OPF_RETURN_REALPATH for
843 * solib.c (solib_find): Likewise. Four times.
844 * source.c (openp): Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH
845 in the function comment and for the realpath_fptr variable.
846 (source_full_path_of): Add OPF_RETURN_REALPATH for openp call.
847 (find_and_open_source): Likewise. Twice.
848 * symfile.c (symfile_bfd_open): Likewise, also twice.
850 2013-09-04 Doug Evans <dje@google.com>
852 * progspace.c (save_current_space_and_thread): Remove unnecessary
853 call to save_current_inferior.
855 2013-09-04 Andrew Burgess <aburgess@broadcom.com>
857 * sh64-tdep.c (sh64_do_register): Return after printing message
858 about unavailable register contents.
860 2013-09-04 Muhammad Bilal <mbilal@codesourcery.com>
861 Pedro Alves <palves@redhat.com>
863 * symfile.c (add_symbol_file_command): Error out on unknown
864 option. Handle EXPECTING_SEC_ADDR/EXPECTING_SEC_NAME before '-'
865 options and collapse into single conditional branch.
867 2013-09-03 Luis Machado <lgustavo@codesourcery.com>
869 * inf-child.c (inf_child_follow_fork): New parameter
871 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise.
872 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
873 * inferior.h (detach_fork): Remove.
874 * infrun.c (detach_fork): Adjust comment and make it
876 (follow_fork): Pass detach_fork parameter to
878 * linux-nat.c (linux_child_follow_fork): New parameter
880 * target.c (target_follow_fork): New parameter detach_fork.
881 Pass detach_fork as parameter and print its value.
882 * target.h (struct target_ops) <to_follow_fork>: New int
884 (target_follow_fork): New parameter detach_fork.
886 2013-09-03 Joel Brobecker <brobecker@adacore.com>
888 * solib-ia64-hpux.c (ia64_hpux_relocate_section_addresses):
889 Replace sec->bfd by sec->the_bfd_section->owner.
891 2013-09-03 Yao Qi <yao@codesourcery.com>
893 * linux-tdep.c (linux_is_uclinux): New function. Code moved
894 from linux_has_shared_address_space.
895 (linux_has_shared_address_space): Call linux_is_uclinux.
896 * linux-tdep.h (linux_is_uclinux): Declare.
897 * m68klinux-tdep.c (m68k_linux_get_sigtramp_info): Call
900 2013-09-03 Yao Qi <yao@codesourcery.com>
902 * config/djgpp/fnchange.lst: Remove entry of
903 i386-interix-nat.c and i386-interix-tdep.c.
904 * configure.ac: Remove '*-*-interix*'.
905 * configure: Re-generated.
906 * defs.h (enum gdb_osabi): Remove GDB_OSABI_INTERIX.
907 * i386-cygwin-tdep.c (i386_cygwin_osabi_sniffer): Remove
909 * osabi.c (gdb_osabi_names): Remove "Interix".
911 2013-09-03 Yao Qi <yao@codesourcery.com>
913 * arch-utils.c: Fix typo in the comment to gdbarch_update_p.
915 2013-09-02 Markus Metzger <markus.t.metzger@intel.com>
917 * record.h (record_print_flag) <record_print_src_line,
918 record_print_insn_range>: Rename into ...
919 (record_print_flag) <record_print_src_line,
920 record_print_insn_range>: ... this. Update all users.
922 2013-09-02 Pierre Muller <muller@sourceware.org>
924 * windows-nat.c (windows_xfer_memory): Handle ERROR_PARTIAL_COPY
927 2013-09-02 Pierre Muller <muller@sourceware.org>
929 * windows-nat.c (windows_xfer_memory): Fix compilation failure
930 by use of plongest function.
932 2013-09-02 Tristan Gingold <gingold@adacore.com>
934 * NEWS: Add entry mentioning support for native Windows x64
937 * amd64-windows-tdep.c: #include "objfiles.h", "frame-unwind.h",
938 "coff/internal.h", "coff/i386.h", "coff/pe.h" and "libcoff.h".
939 (struct amd64_windows_frame_cache): New struct.
940 (amd64_windows_w2gdb_regnum): New global.
941 (pc_in_range, amd64_windows_frame_decode_epilogue)
942 (amd64_windows_frame_decode_insns, amd64_windows_find_unwind_info)
943 (amd64_windows_frame_cache, amd64_windows_frame_prev_register)
944 (amd64_windows_frame_this_id): New functions.
945 (amd64_windows_frame_unwind): New static global.
946 (amd64_windows_skip_prologue): New function.
947 (amd64_windows_init_abi): Call frame_unwind_prepend_unwinder
948 with amd64_windows_frame_unwind. Call set_gdbarch_skip_prologue
949 with amd64_windows_skip_prologue.
951 2013-08-30 Joel Brobecker <brobecker@adacore.com>
955 2013-08-30 Pedro Alves <palves@redhat.com>
957 * mi/mi-main.c (mi_cmd_trace_find): Use LOC_AND_ADDRESS instead of
960 2013-08-30 Pedro Alves <palves@redhat.com>
962 * thread.c (restore_selected_frame): Use SRC_AND_LOC, and change
965 2013-08-30 Pedro Alves <palves@redhat.com>
967 * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
968 Adjust arguments to print_stack_frame.
970 2013-08-30 Pedro Alves <palves@redhat.com>
972 * ada-tasks.c (task_command_1): Write SRC_AND_LOC instead '1'.
974 2013-08-30 Pedro Alves <palves@redhat.com>
976 * frame.h (show_and_print_stack_frame): Delete declaration.
978 2013-08-30 Phil Muldoon <pmuldoon@redhat.com>
982 * python/py-arch.c (ARCHPY_REQUIRE_VALID): New macro.
983 (archpy_name): Check for valid architecture.
984 (archpy_disassemble): Ditto.
986 2013-08-29 Joel Brobecker <brobecker@adacore.com>
988 * rs6000-nat.c (rs6000_ptrace32): Cast "addr" to "uintptr_t"
989 instead of "long long" in call to ptrace64.
991 2013-08-29 Andrew Burgess <aburgess@broadcom.com>
993 * mi/mi-interp.c (mi_command_loop): Change signature to match
994 interp_command_loop_ftype.
995 (mi1_command_loop): Remove.
996 (mi2_command_loop): Remove.
997 (mi3_command_loop): Remove.
998 (mi_interpreter_resume): Remove setting of
999 deprecated_command_loop_hook.
1000 (_initialize_mi_interp): Set mi_command_loop as the command loop
1003 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
1005 * valops.c (do_search_struct_field): Pass v2 instead of base_type to
1008 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
1010 * value.c (allocate_value_contents): Make static.
1011 * value.h (allocate_value_contents): Remove prototype.
1013 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
1015 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use value_at_lazy instead
1016 of assembling value via allocate_value_lazy and attribute setter.
1017 * findvar.c (default_read_var_value): Use value_at_lazy instead of
1018 assembling value via allocate_value_lazy and attribute setter.
1019 * valops.c (do_search_struct_field): Use value_at_lazy instead of
1020 assembling value via allocate_value_lazy and attribute setter.
1022 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
1024 * value.c (value_from_contents_and_address): Replace allocate_value and
1025 memcpy with value_from_contents.
1027 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
1029 * python/py-framefilter.c (py_print_frame): Remove usage of
1030 PyString_AsString. Use python_string_to_host_string instead.
1031 Refactor function to work with a string as a new allocation
1032 instead of a pointer.
1033 (py_print_frame): Ditto.
1034 * python/lib/gdb/frames.py (return_list): Cain iterators together
1035 instead of adding them as a list.
1036 (_sort_list): Call return_list, and remove duplicate code.
1037 (execute_frame_filters): Convert iterator to a list with list().
1038 * python/lib/gdb/command/frame_filters.py
1039 (SetFrameFilterPriority._set_filter_priority): Convert priority
1040 attribute to an integer.
1041 * python/lib/gdb/FrameIterator.py (FrameIterator.next): Define
1042 wrapper function __next__.
1043 * python/lib/gdb/FrameDecorator.py: If basestring not defined,
1046 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
1049 * python/py-framefilter.c (apply_frame_filter): Check
1050 gdb_python_initialized. Exit if the Python frame-filter code
1051 cannot be initialized.
1053 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
1056 * top.c (print_gdb_version): Remove erroneous newline after help
1059 2013-08-29 Yao Qi <yao@codesourcery.com>
1061 * varobj.c (install_dynamic_child): Remove trailing space.
1062 Add one blank line after variable declaration.
1064 2013-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1067 * corefile.c (get_exec_file): Use exec_filename.
1068 * defs.h (OPF_DISABLE_REALPATH): New definition. Add new comment.
1069 * exec.c (exec_close): Free EXEC_FILENAME.
1070 (exec_file_attach): New variable canonical_pathname. Use
1071 OPF_DISABLE_REALPATH. Call gdb_realpath explicitly. Set
1073 * exec.h (exec_filename): New.
1074 * inferior.c (print_inferior, inferior_command): Use
1075 PSPACE_EXEC_FILENAME.
1076 * mi/mi-main.c (print_one_inferior): Likewise.
1077 * progspace.c (clone_program_space, print_program_space): Likewise.
1078 * progspace.h (struct program_space): New field pspace_exec_filename.
1079 * source.c (openp): Describe OPF_DISABLE_REALPATH. New variable
1080 realpath_fptr, initialize it from OPF_DISABLE_REALPATH, use it.
1082 2013-08-28 Will Newton <will.newton@linaro.org>
1084 * common/linux-ptrace.c: Include stdint.h unconditionally.
1086 2013-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1089 * nto-tdep.c (nto_find_and_open_solib): Use OPF_TRY_CWD_FIRST.
1091 2013-08-28 Yao Qi <yao@codesourcery.com>
1092 Pedro Alves <palves@redhat.com>
1094 * event-top.c (gdb_setup_readline): Call stderr_fileopen
1095 instead of stdio_fileopen.
1096 * main.c (captured_main) [__MINGW32__]: Set stderr unbuffered.
1097 .Call stderr_fileopen instead of stdio_fileopen.
1098 * ui-file.c [__MINGW32__] (stderr_file_write): New function.
1099 [__MINGW32__] (stderr_file_fputs): New function.
1100 (stderr_fileopen): New function.
1101 * ui-file.h (stderr_fileopen): Declare.
1103 2013-08-27 Doug Evans <dje@google.com>
1105 * dwarf2read.c (struct dwarf2_cu): Tweak comment.
1106 (struct dwarf2_per_cu_data): Ditto.
1107 (maybe_queue_comp_unit): Delete forward decl. Add comment.
1108 (process_imported_unit_die): Ditto.
1109 (follow_die_sig_1): Simplify assert.
1111 2013-08-27 Pedro Alves <palves@redhat.com>
1113 * windows-nat.c (windows_xfer_memory): Adjust prototype to follow
1114 xfer_partial's interface. Return TARGET_XFER_E_IO on error.
1115 (windows_xfer_partial): Defer TARGET_OBJECT_MEMORY handling to
1116 windows_xfer_memory directly.
1117 (init_windows_ops): Don't install a deprecated_xfer_memory method.
1119 2013-08-27 Pedro Alves <palves@redhat.com>
1121 * darwin-nat.c (darwin_xfer_memory): Delete.
1122 (_initialize_darwin_inferior): Don't install a
1123 deprecated_xfer_memory method.
1125 2013-08-27 Pedro Alves <pedro@codesourcery.com>
1126 Yao Qi <yao@codesourcery.com>
1128 * mi/mi-cmd-stack.c (list_args_or_locals): Adjust prototype.
1129 (parse_no_frames_option): Remove.
1130 (mi_cmd_stack_list_locals): Handle --skip-unavailable.
1131 (mi_cmd_stack_list_args): Adjust.
1132 (mi_cmd_stack_list_variables): Handle --skip-unavailable.
1133 (list_arg_or_local): Add new parameter 'skip_unavailable'. Return
1134 early if SKIP_UNAVAILABLE is true and ARG->val is unavailable.
1136 (list_args_or_locals): New parameter 'skip_unavailable'.
1138 * valprint.c (scalar_type_p): Rename to ...
1139 (val_print_scalar_type_p): ... this. Make extern.
1140 (val_print, value_check_printable): Adjust.
1141 * valprint.h (val_print_scalar_type_p): Declare.
1142 * value.c (value_entirely_unavailable): New function.
1143 * value.h (value_entirely_unavailable): Declare.
1145 * NEWS: Mention the new option "--skip-unavailable" to MI
1146 commands '-stack-list-locals', '-stack-list-arguments' and
1147 '-stack-list-variables'.
1149 2013-08-27 Yao Qi <yao@codesourcery.com>
1151 * mi/mi-cmd-stack.c (parse_no_frames_option): Remove.
1152 (mi_cmd_stack_list_args): Use mi_getopt_silent to handle
1154 * mi/mi-getopt.c (mi_getopt): Remove.
1155 (mi_getopt_1): Renamed from mi_getopt. Add one parameter
1157 (mi_getopt): Call mi_getopt_1.
1158 (mi_getopt_silent): New.
1159 * mi/mi-getopt.h (mi_getopt_silent): Declare.
1161 2013-08-26 Doug Evans <dje@google.com>
1164 * dwarf2read.c (dw2_dump): Print some minimal information indicating
1165 .gdb_index is in use.
1166 * symfile.c (reread_symbols): Reset objfile->sf.
1168 * NEWS: Document "mt print objfiles" now takes optional regexp.
1169 * symmisc.c (maintenance_print_objfiles): Argument is now an optional
1170 regexp of objfiles to print.
1171 (_initialize_symmisc): Update doc string for "mt print objfiles".
1173 * dwarf2read.c (write_psymtabs_to_index): Move error checks ahead of
1174 missing debug info checks.
1176 2013-08-26 Raunaq Bathija <raunaq12@in.ibm.com>
1177 Ulrich Weigand <uweigand@de.ibm.com>
1179 * xcoffread.c (arrange_linetable): Add fix to correctly handle
1180 line tables generated by XLC compiled binaries.
1182 2013-08-23 Doug Evans <dje@google.com>
1184 * symmisc.c (dump_symtab): Delete prototype.
1185 (dump_msymbols, dump_objfile): Ditto.
1186 (maintenance_info_symtabs): Mark as dont_repeat.
1187 (_initialize_symmisc): Improve doc string for "mt info symtabs".
1189 * elfread.c (elf_symfile_read): Move "Done reading minimal symbols"
1190 debugging printf to better location.
1192 2013-08-23 Pedro Alves <palves@redhat.com>
1194 * target.c (target_read_live_memory): Change type of 'ret' local
1197 2013-08-23 Pedro Alves <palves@redhat.com>
1199 * remote.c (remote_write_bytes_aux, remote_write_bytes)
1200 (remote_read_bytes): Change return type to LONGEST, and adjust to
1201 return a target_xfer_error on error.
1202 (remote_xfer_memory): Delete.
1203 (remote_flash_write): Change type of 'ret' local to LONGEST.
1204 (remote_xfer_partial, remote_xfer_partial): Adjust.
1205 (init_remote_ops): Don't install a deprecated_xfer_memory hook.
1207 2013-08-23 Pierre Muller <muller@sourceware.org>
1209 ARI fix: Push # directives to start of line.
1210 * rs6000-nat.c (rs6000_ptrace32, rs6000_ptrace64): Rule applied.
1212 2013-08-12 Muhammad Waqas <mwaqas@codesourcery.com>
1215 * breakpoint.c (enable_command, disable_command): Iterate over
1216 all specified breakpoint locations.
1218 2013-08-22 Luis Machado <lgustavo@codesourcery.com>
1220 * common/linux-ptrace.c (linux_fork_to_function): Push #
1221 directives to the start of the line.
1222 (linux_check_ptrace_features): Fix warning message to use
1225 2013-08-22 Luis Machado <lgustavo@codesourcery.com>
1227 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-nat.h and
1228 nat/linux-waitpid.h.
1229 (linux-waitpid.o): New object file rule.
1230 * common/linux-ptrace.c: Include nat/linux-waitpid.h.
1231 (current_ptrace_options): Moved from linux-nat.c.
1232 (linux_ptrace_test_ret_to_nx): Use type casts for ptrace
1234 (linux_fork_to_function): New function.
1235 (linux_grandchild_function): Likewise.
1236 (linux_child_function): Likewise.
1237 (linux_check_ptrace_features): New function, heavily
1238 based on linux-nat.c:linux_test_for_tracefork.
1239 (linux_enable_event_reporting): New function.
1240 (ptrace_supports_feature): Likewise.
1241 (linux_supports_tracefork): Likewise.
1242 (linux_supports_traceclone): Likewise.
1243 (linux_supports_tracevforkdone): Likewise.
1244 (linux_supports_tracesysgood): Likewise.
1245 * common/linux-ptrace.h (HAS_NOMMU): Moved from
1246 gdbserver/linux-low.c.
1247 (linux_enable_event_reporting): New declaration.
1248 (linux_supports_tracefork): Likewise.
1249 (linux_supports_traceclone): Likewise.
1250 (linux_supports_tracevforkdone): Likewise.
1251 (linux_supports_tracesysgood): Likewise.
1252 * config.in (PTRACE_TYPE_ARG4): Regenerate.
1253 * config/aarch64/linux.mh (NATDEPFILES): Add linux-waitpid.o.
1254 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
1255 * config/arm/linux.mh (NATDEPFILES): Likewise.
1256 * config/i386/linux.mh (NATDEPFILES): Likewise.
1257 * config/i386/linux64.mh (NATDEPFILES): Likewise.
1258 * config/ia64/linux.mh (NATDEPFILES): Likewise.
1259 * config/m32r/linux.mh (NATDEPFILES): Likewise.
1260 * config/m68k/linux.mh (NATDEPFILES): Likewise.
1261 * config/mips/linux.mh (NATDEPFILES): Likewise.
1262 * config/pa/linux.mh (NATDEPFILES): Likewise..
1263 * config/powerpc/linux.mh (NATDEPFILES): Likewise..
1264 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
1265 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
1266 * config/sparc/linux.mh (NATDEPFILES): Likewise.
1267 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
1268 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
1269 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
1270 * configure.ac (AC_CACHE_CHECK): Add void * to the list of
1271 ptrace's 4th argument's types.
1272 Check the type of PTRACE_TYPE_ARG4.
1273 * configure: Regenerate.
1274 * linux-nat.c: Include nat/linux-nat.h and nat/linux-waitpid.h.
1275 (SYSCALL_SIGTRAP): Moved to nat/linux-nat.h.
1276 (linux_supports_tracefork_flag): Remove.
1277 (linux_supports_tracesysgood_flag): Likewise.
1278 (linux_supports_tracevforkdone_flag): Likewise.
1279 (current_ptrace_options): Moved to
1280 common/linux-ptrace.c.
1281 (linux_tracefork_child): Remove.
1282 (my_waitpid): Remove.
1283 (linux_test_for_tracefork): Renamed to
1284 linux_check_ptrace_features and moved to common/linux-ptrace.c.
1285 (linux_test_for_tracesysgood): Remove.
1286 (linux_supports_tracesysgood): Remove.
1287 (linux_supports_tracefork): Remove.
1288 (linux_supports_tracevforkdone): Remove.
1289 (linux_enable_tracesysgood): Remove.
1290 (linux_enable_event_reporting): Remove.
1291 (linux_init_ptrace): New function.
1292 (linux_child_post_attach): Call linux_init_ptrace.
1293 (linux_child_post_startup_inferior): Call linux_init_ptrace.
1294 (linux_child_follow_fork): Call linux_supports_tracefork
1295 and linux_supports_tracevforkdone.
1296 (linux_child_insert_fork_catchpoint): Call
1297 linux_supports_tracefork.
1298 (linux_child_insert_vfork_catchpoint): Likewise.
1299 (linux_child_set_syscall_catchpoint): Call
1300 linux_supports_tracesysgood.
1301 (lin_lwp_attach_lwp): Call linux_supports_tracefork.
1302 * nat/linux-nat.h: New file.
1303 * nat/linux-waitpid.c: New file.
1304 * nat/linux-waitpid.h: New file.
1306 2013-08-22 Samuel Bronson <naesten@gmail.com>
1308 ARM Linux support for `catch syscall'.
1309 * syscalls/arm-linux.py: New file.
1310 * syscalls/arm-linux.xml: Likewise.
1311 * arm-linux-tdep.c (arm_linux_get_syscall_number): New function.
1312 (arm_linux_init_abi): Register the new function and syscall xml file.
1313 * data-directory/Makefile.in: Install the new syscall xml file.
1314 * NEWS: Brag about this.
1316 2013-08-22 Pedro Alves <palves@redhat.com>
1319 * corefile.c (target_xfer_memory_error): New function.
1320 (memory_error): Defer EIO to target_memory_error.
1321 (read_memory): Use target_xfer_partial, and handle finer-grained
1323 * target.c (target_xfer_error_to_string): New function.
1324 (memory_xfer_partial_1): If memory is known to be
1325 unavailable, return TARGET_XFER_E_UNAVAILABLE instead of -1.
1326 (target_xfer_partial): Make extern.
1327 * target.h (enum target_xfer_error): New enum.
1328 (target_xfer_error_to_string): Declare function.
1329 (target_xfer_partial): Declare function.
1330 (struct target_ops) <xfer_partial>: Adjust describing comment.
1332 2013-08-22 Alan Modra <amodra@gmail.com>
1334 * configure.host: Support powerpc64le-linux and powerpcle-linux hosts.
1335 * configure.tgt: Likewise as targets.
1337 2013-08-20 Doug Evans <dje@google.com>
1339 * buildsym.c (subfile_stack): Move here from buildsym.h.
1340 (pending_macros): Ditto.
1341 (get_macro_table): New function.
1342 (buildsym_init): Initialize subfile_stack.
1343 * coffread.c (type_vector,type_vector_length): Moved here from
1345 (INITIAL_TYPE_VECTOR_LENGTH): Ditto.
1346 (coff_symtab_read): Use it.
1347 * dbxread.c (read_ofile_symtab): Delete init of subfile_stack.
1348 * dwarf2read.c (macro_start_file): Replace uses of pending_macros
1349 with call to get_macro_table.
1350 * stabsread.c (type_vector,type_vector_length): Moved here from
1352 (INITIAL_TYPE_VECTOR_LENGTH): Ditto.
1353 * buildsym.h (get_macro_table): Declare.
1355 2013-08-20 Tom Tromey <tromey@redhat.com>
1357 * dbxread.c (record_minimal_symbol): Make 'name' argument const.
1359 (read_dbx_dynamic_symtab): Make 'name' const. Remove casts.
1361 2013-08-20 Doug Evans <dje@google.com>
1363 * blockframe.c: Remove #include "psymtab.h".
1364 * cp-support.c: Ditto.
1368 2013-08-20 Tom Tromey <tromey@redhat.com>
1371 * exceptions.h (return_mask): Now an enum.
1372 (RETURN_MASK_QUIT, RETURN_MASK_ERROR, RETURN_MASK_ALL): Now
1375 2013-08-20 Tom Tromey <tromey@redhat.com>
1377 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Use
1379 * elfread.c (elf_rel_plt_read, elf_gnu_ifunc_record_cache)
1380 (elf_gnu_ifunc_resolve_by_got): Use get_objfile_arch.
1381 * jit.c (jit_object_close_impl): Update.
1382 * jv-lang.c (get_dynamics_objfile): Update.
1383 * linespec.c (add_minsym): Use get_dynamics_objfile.
1384 * objfiles.c (get_objfile_bfd_data): Initialize 'gdbarch' field.
1385 (allocate_objfile): Don't initialize 'gdbarch' field.
1386 (get_objfile_arch): Update.
1387 * objfiles.h (struct objfile_per_bfd_storage) <gdbarch>: New field,
1389 (struct objfile) <gdbarch>: ... here. Remove.
1390 * stap-probe.c (stap_can_evaluate_probe_arguments): Use
1392 * symfile.c (init_entry_point_info): Use get_objfile_arch.
1394 2013-08-20 Alan Modra <amodra@gmail.com>
1396 * doublest.c (convert_floatformat_to_doublest): Use fmt->split_half
1397 for IBM long double nan and inf.
1398 (floatformat_is_negative, floatformat_classify,
1399 floatformat_mantissa): Similarly.
1400 (floatformat_ieee_single, floatformat_ieee_double,
1401 floatformat_ieee_quad, floatformat_arm_ext,
1402 floatformat_ia64_spill): Delete unused vars.
1403 (_initialize_doublest): Delete unused function.
1404 * gdbtypes.c (floatformats_ibm_long_double): Use new big- and
1405 little-endian variants of floatformat_ibm_long_double.
1407 2013-08-19 Luis Machado <lgustavo@codesourcery.com>
1409 * Makefile.in (SFILES): Remove common/target-common.c and
1410 add target/waitstatus.c.
1411 (HFILES_NO_SRCDIR): Remove common/target-common.h and add
1412 target/resume.h, target/wait.h and target/waitstatus.h.
1413 (COMMON_OBS): Remove target-common.o and add
1415 (target-common.o): Remove.
1416 (waitstatus.o): New target object file.
1417 * common/target-common.c: Move contents to
1418 target/waitstatus.c and remove.
1419 * common/target-common.h: Move contents to other files and
1421 (enum resume_kind: Move to target/resume.h.
1422 (TARGET_WNOHANG): Move to target/wait.h.
1423 (enum target_waitkind): Move to target/waitstatus.h.
1424 (struct target_waitstatus): Likewise.
1425 * target.h: Do not include target-common.h and
1426 include target/resume.h, target/wait.h and
1427 target/waitstatus.h.
1428 * target/resume.h: New file.
1429 * target/wait.h: New file.
1430 * target/waitstatus.h: New file.
1431 * target/waitstatus.c: New file.
1433 2013-08-19 Pedro Alves <palves@redhat.com>
1435 * linux-nat.c (linux_test_for_tracefork)
1436 (linux_test_for_tracesysgood, linux_child_follow_fork)
1437 (lin_lwp_attach_lwp, linux_nat_resume): Don't block child signals.
1438 (linux_nat_wait_1): Extend comment.
1439 (linux_async_pipe): Add comment.
1441 2013-08-15 Kevin Buettner <kevinb@redhat.com>
1443 * rl78-tdep.c (RL78_RAW_PC_REGNUM): New enum.
1444 (RL78_PC_REGNUM): Move to list of pseudo-register enums.
1445 (rl78_register_type, rl78_register_name, rl78_register_reggroup_p):
1446 Update to account for fact that PC is now a pseudo-register.
1447 (rl78_pseudo_register_write, rl78_pseudo_register_read): Add
1448 cases for RL78_PC_REGNUM.
1450 2013-08-15 Muhammad Bilal <mbilal@codesourcery.com>
1453 * top.c (quit_force): Skip writing history file
1454 if input is not from terminal.
1456 2013-08-14 Tom Tromey <tromey@redhat.com>
1458 * remote.c (struct remote_state) <echo_nextthread, nextthread,
1459 resultthreadlist>: New fields.
1460 (OPAQUETHREADBYTES, threadref, MAXTHREADLISTRESULTS): Move earlier.
1461 (remote_get_threadlist, remote_threadlist_iterator): Use
1462 new fields. Remove static variables.
1464 2013-08-14 Tom Tromey <tromey@redhat.com>
1466 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p,
1467 remote_watch_data_address>: New fields.
1468 (remote_stopped_by_watchpoint_p, remote_watch_data_address): Remove.
1469 (process_stop_reply, remote_wait_as)
1470 (remote_check_watch_resources, remote_stopped_data_address): Update.
1472 2013-08-14 Tom Tromey <tromey@redhat.com>
1474 * remote.c (struct remote_state) <async_client_callback,
1475 async_client_context>: New fields.
1476 (async_client_callback, async_client_context): Remove.
1477 (remote_async_serial_handler, remote_async): Update.
1479 2013-08-14 Tom Tromey <tromey@redhat.com>
1481 * remote.c (sizeof_pkt): Remove.
1482 (remote_trace_find): Use rs->buf_size, not sizeof_pkt.
1484 2013-08-14 Tom Tromey <tromey@redhat.com>
1486 * remote.c (struct remote_state) <use_threadinfo_query,
1487 use_threadextra_query>: New fields.
1488 (remote_threads_info, remote_threads_extra_info)
1489 (remote_open_1): Update.
1491 2013-08-14 Tom Tromey <tromey@redhat.com>
1493 * remote.c (struct remote_state) <finished_object,
1494 finished_annex, finished_offset>: New fields.
1495 (remote_read_qxfer): Use remote_state fields; remove static
1498 2013-08-14 Tom Tromey <tromey@redhat.com>
1500 * remote.c (struct remote_state) <last_sent_step>:
1502 (last_sent_step): Remove.
1503 (remote_resume, remote_wait_as): Update.
1505 2013-08-14 Tom Tromey <tromey@redhat.com>
1507 * remote.c (struct remote_state) <last_sent_signal>:
1509 (last_sent_signal): Remove.
1510 (new_remote_state, remote_resume, remote_wait_as): Update.
1512 2013-08-14 Tom Tromey <tromey@redhat.com>
1514 * remote.c (struct remote_state) <last_program_signals_packet>:
1516 (last_program_signals_packet): Remove.
1517 (remote_program_signals, remote_open_1): Update.
1519 2013-08-14 Tom Tromey <tromey@redhat.com>
1521 * remote.c (struct remote_state) <last_pass_packet>:
1523 (last_pass_packet): Remove.
1524 (remote_pass_signals, remote_open_1): Update.
1526 2013-08-14 Tom Tromey <tromey@redhat.com>
1528 * remote.c (struct remote_state) <remote_traceframe_number>:
1530 (remote_traceframe_number): Remove.
1531 (new_remote_state, remote_open_1, set_remote_traceframe)
1532 (remote_trace_find): Update.
1534 2013-08-14 Tom Tromey <tromey@redhat.com>
1536 * remote.c (struct remote_state) <general_thread, continue_thread>:
1538 (general_thread, continue_thread): Remove.
1539 (record_currthread, set_thread, set_general_process)
1540 (remote_open_1, extended_remote_attach_1, remote_wait_as)
1541 (extended_remote_mourn_1): Update.
1543 2013-08-14 Tom Tromey <tromey@redhat.com>
1545 * remote.c (struct remote_state) <remote_desc>: New field.
1546 (remote_desc): Remove.
1547 (remote_threads_info, remote_threads_extra_info, remote_close)
1548 (send_interrupt_sequence, remote_start_remote, remote_open_1)
1549 (readchar, remote_xfer_partial, remote_rcmd, packet_command)
1550 (remote_hostio_send_command, remote_file_put, remote_file_get)
1551 (remote_file_delete, remote_can_async_p, remote_is_async_p)
1552 (remote_async, remote_new_objfile, set_range_stepping): Update.
1554 2013-08-14 Tom Tromey <tromey@redhat.com>
1556 * remote.c (remote_state): Now a pointer.
1557 (get_remote_state_raw): Update.
1558 (new_remote_state): New function.
1559 (_initialize_remote): Use new_remote_state.
1561 2013-08-14 Tom Tromey <tromey@redhat.com>
1563 * remote.c (remote_protocol_features): Now const.
1565 2013-08-14 Tom Tromey <tromey@redhat.com>
1567 * remote.c (crc32_table, crc32): Remove.
1568 (remote_verify_memory): Use xcrc32.
1570 2013-08-13 Sergio Durigan Junior <sergiodj@redhat.com>
1572 * value.h (create_internalvar_type_lazy): Adjust prototype
1575 2013-08-13 Andrew Burgess <aburgess@broadcom.com>
1577 * common/format.c (parse_format_string): Don't allow '#' flag for
1578 pointer arguments in format string.
1580 2013-08-13 Pierre Muller <muller@sourceware.org>
1582 * utils.c (init_page_info): Only call tgetnum function
1583 if rl_get_screen_size did not return useful values.
1585 2013-08-12 Ali Anwar <ali_anwar@codesourcery.com>
1587 PR breakpoints/15117
1588 * linespec.c (linespec_parse_basic): Check for convenience
1589 variable or history value while parsing.
1591 2013-08-12 Sergio Durigan Junior <sergiodj@redhat.com>
1593 Revert implementation of gdbarch_gdb_signal_{to,from}_target for
1595 * avr-tdep.c: Remove include of "linux-tdep.h". Remove enum with
1596 different signals between the generic Linux kernel implementation
1598 (avr_linux_gdb_signal_from_target): Delete.
1599 (avr_linux_gdb_signal_to_target): Delete.
1600 (avr_gdbarch_init): Don't set gdbarch_gdb_signal_{to,from}_target.
1602 2013-08-09 Doug Evans <dje@google.com>
1604 * dwarf2read.c (create_addrmap_from_index): Ignore bad address table
1607 2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com>
1609 * linux-tdep.c: Define enum with generic signal numbers.
1610 (linux_gdb_signal_from_target): New function.
1611 (linux_gdb_signal_to_target): Likewise.
1612 (linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
1613 methods to the functions above.
1614 * linux-tdep.h (linux_gdb_signal_from_target): New prototype.
1615 (linux_gdb_signal_to_target): Likewise.
1616 * alpha-linux-tdep.c: Define new enum with signals different
1617 from generic Linux kernel.
1618 (alpha_linux_gdb_signal_from_target): New function.
1619 (alpha_linux_gdb_signal_to_target): Likewise.
1620 (alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
1621 with the functions mentioned above.
1622 * avr-tdep.c: Define enum with differences between Linux kernel
1624 (avr_linux_gdb_signal_from_target): New function.
1625 (avr_linux_gdb_signal_to_target): Likewise.
1626 (avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to
1627 the functions mentioned above.
1628 * sparc-linux-tdep.c: Define enum with differences between SPARC
1629 and generic Linux kernel signal numbers.
1630 (sparc32_linux_gdb_signal_from_target): New function.
1631 (sparc32_linux_gdb_signal_to_target): Likewise.
1632 (sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
1633 to the functions defined above.
1634 * xtensa-linux-tdep.c: Define enum with differences between
1635 Xtensa and Linux kernel generic signals.
1636 (xtensa_linux_gdb_signal_from_target): New function.
1637 (xtensa_linux_gdb_signal_to_target): Likewise.
1638 (xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target
1639 to the functions defined above.
1640 * mips-linux-tdep.c: Define enum with differences between
1641 signals in MIPS and Linux kernel generic ones.
1642 (mips_gdb_signal_to_target): New function.
1643 (mips_gdb_signal_from_target): Redefine to use new enum, handle
1644 only different signals from the Linux kernel generic.
1645 (mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
1646 the functions defined above.
1647 * mips-linux-tdep.h (enum mips_signals): Remove.
1649 2013-08-09 Pedro Alves <palves@redhat.com>
1651 * avr-tdep.c (XMALLOC): Delete macro.
1652 * cli/cli-dump.c (XMALLOC): Delete macro.
1654 2013-08-09 Pedro Alves <palves@redhat.com>
1656 * cli/cli-dump.c: Don't include cli/cli-dump.h.
1657 (scan_expression_with_cleanup, scan_filename_with_cleanup)
1658 (fopen_with_cleanup, add_dump_command): Make static.
1659 * cli/cli-dump.h: Delete file.
1660 * Makefile.in (HFILES_NO_SRCDIR): Remove reference to
1663 2013-08-09 Pedro Alves <palves@redhat.com>
1665 * tracepoint.c (tfile_start): Show tilde-expanded filename in
1668 2013-08-09 Pedro Alves <palves@redhat.com>
1670 * breakpoint.c (save_breakpoints): Show tilde-expanded filename in
1673 2013-08-09 Pedro Alves <palves@redhat.com>
1675 * gcore.c (create_gcore_bfd): Don't use tilde_expand here.
1676 (gcore_command): Use tilde_expand here, and when showing the
1677 filename to the user, show the expanded version.
1679 2013-08-09 Yao Qi <yao@codesourcery.com>
1681 * stack.c (read_frame_arg): Set 'entryval_error' to NULL if
1684 2013-08-08 Azat Khuzhin <a3at.mail@gmail.com> (tiny change)
1686 * gcore.c (create_gcore_bfd): Use tilde_expand.
1688 2013-08-08 Yao Qi <yao@codesourcery.com>
1690 * frame.h (read_frame_local): Declare.
1691 * mi/mi-cmd-stack.c (list_args_or_locals): Call
1693 * stack.c (read_frame_local): New.
1695 2013-08-08 Yao Qi <yao@codesourcery.com>
1697 * mi/mi-cmd-stack.c: Update comments to function
1698 list_args_or_locals.
1700 2013-08-07 Tom Tromey <tromey@redhat.com>
1703 * dwarf2read.c (struct process_psymtab_comp_unit_data): New.
1704 (process_psymtab_comp_unit_reader): Use it.
1705 (process_psymtab_comp_unit): Update. Add "pretend_language"
1707 (dwarf2_build_psymtabs_hard): Update.
1708 (scan_partial_symbols): Pass CU's language to
1709 process_psymtab_comp_unit.
1711 2013-08-07 Tom Tromey <tromey@redhat.com>
1713 * dwarf2read.c (dw2_get_primary_filename_reader): Remove.
1714 (dwarf2_gdb_index_functions): Update.
1715 * psymtab.c (find_symbol_file_from_partial): Remove.
1716 (psym_functions): Update.
1717 * symfile.h (struct quick_symbol_functions) <find_symbol_file>:
1720 2013-08-07 Tom Tromey <tromey@redhat.com>
1722 * symfile.c (set_initial_language): Look up "main" symbol
1723 and use its language.
1724 * symtab.c (find_main_filename): Remove.
1725 * symtab.h (find_main_filename): Remove.
1727 2013-08-07 Tom Tromey <tromey@redhat.com>
1729 * dwarf2read.c (recursively_compute_inclusions): Add
1730 "immediate_parent" argument. Set symtab's "user" field
1732 (compute_symtab_includes): Update.
1734 2013-08-07 Tom Tromey <tromey@redhat.com>
1736 * linespec.c (convert_linespec_to_sals): Use maybe_add_address
1737 when adding label symbols.
1739 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
1740 Ulrich Weigand <uweigand@de.ibm.com>
1742 * configure.tgt (powerpc64-*-aix*): Match powerpc64 running aix.
1743 * configure.host (powerpc64-*-aix*): Likewise.
1745 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
1746 Ulrich Weigand <uweigand@de.ibm.com>
1748 * gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64
1750 * rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb.
1751 (rs6000_ptrace32): Call ptrace64 instead of ptrace if present.
1752 (rs6000_ptrace64): Call ptace64 instead of ptracex if present.
1753 * configure.ac: Check for ptrace64.
1754 * configure, config.in: Regenerate.
1756 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
1757 Ulrich Weigand <uweigand@de.ibm.com>
1759 * aixthread.c: Call ptrace64 instead of ptracex if defined.
1760 Call ptrace64 instead of ptrace if defined.
1761 Add macro addr_ptr to take care of ptrace address argument.
1762 (pdc_read_regs): Likewise.
1763 (pdc_write_regs): Likewise.
1764 (aix_thread_resume): Likewise.
1765 (fetch_regs_kernel_thread): Likewise.
1766 (store_regs_kernel_thread): Likewise.
1768 2013-08-07 Anton Blanchard <anton@samba.org>
1770 * MAINTAINERS: Add myself to Write After Approval.
1772 2013-08-05 Tom Tromey <tromey@redhat.com>
1774 * aix-thread.c (_initialize_aix_thread): Use
1775 complete_target_initialization.
1776 * bsd-uthread.c (_initialize_bsd_uthread): Use
1777 complete_target_initialization.
1778 * dec-thread.c (_initialize_dec_thread): Use
1779 complete_target_initialization.
1780 * ravenscar-thread.c (_initialize_ravenscar): Use
1781 complete_target_initialization.
1782 * sol-thread.c (_initialize_sol_thread): Use
1783 complete_target_initialization.
1784 * spu-multiarch.c (_initialize_spu_multiarch): Use
1785 complete_target_initialization.
1787 2013-08-05 Tom Tromey <tromey@redhat.com>
1789 * ada-exp.y (write_var_or_type): Use bound_minimal_symbol.
1790 * ada-lang.c (ada_lookup_simple_minsym): Return
1791 bound_minimal_symbol.
1792 * ada-lang.h (ada_lookup_simple_minsym): Update.
1793 * c-exp.y (variable): Use lookup_bound_minimal_symbol.
1794 * f-exp.y (variable): Use lookup_bound_minimal_symbol.
1795 * go-exp.y (variable): Use lookup_bound_minimal_symbol.
1796 * jv-exp.y (push_expression_name): Use lookup_bound_minimal_symbol.
1797 * m2-exp.y (variable): Use lookup_bound_minimal_symbol.
1798 * minsyms.c (msymbol_objfile): Remove.
1799 (lookup_minimal_symbol_internal): New function, from
1800 lookup_minimal_symbol.
1801 (lookup_minimal_symbol): Rewrite using
1802 lookup_minimal_symbol_internal.
1803 (lookup_bound_minimal_symbol): New function.
1804 * minsyms.h (msymbol_objfile): Remove.
1805 (lookup_bound_minimal_symbol): Declare.
1806 * p-exp.y (variable): Use lookup_bound_minimal_symbol.
1807 * parse.c (write_exp_msymbol): Change parameter to a
1808 bound_minimal_symbol.
1809 (write_dollar_variable): Use lookup_bound_minimal_symbol.
1810 * parser-defs.h (write_exp_msymbol): Update.
1811 * printcmd.c (address_info): Use lookup_bound_minimal_symbol.
1812 * symfile.c (simple_read_overlay_table): Use
1813 lookup_bound_minimal_symbol.
1814 * symtab.c (skip_prologue_sal): Don't use msymbol_objfile.
1815 (search_symbols): Likewise.
1816 (print_msymbol_info): Take a bound_minimal_symbol argument.
1817 (symtab_symbol_info, rbreak_command): Update.
1818 * symtab.h (struct symbol_search) <msymbol>: Change type
1819 to bound_minimal_symbol.
1820 * valops.c (find_function_in_inferior): Use
1821 lookup_bound_minimal_symbol.
1822 * value.c (value_fn_field): Use lookup_bound_minimal_symbol.
1824 2013-08-05 Jan Kratochvil <jan.kratochvil@redhat.com>
1827 * remote.c (cleanup_sigint_signal_handler): Rename the declaration
1829 (async_cleanup_sigint_signal_handler): ... this.
1830 (initialize_sigint_signal_handler): Remove declaration.
1831 (handle_remote_sigint): Rename the declaration to ...
1832 (async_handle_remote_sigint): ... this.
1833 (handle_remote_sigint_twice): Rename the declaration to ...
1834 (async_handle_remote_sigint_twice): ... this.
1835 (async_remote_interrupt, async_remote_interrupt_twice)
1836 (remote_interrupt): Remove the declarations.
1837 (remote_interrupt_twice): Rename the declaration ...
1838 (sync_remote_interrupt_twice): ... this.
1839 (sigint_remote_twice_token): Rename the variable to ...
1840 (async_sigint_remote_twice_token): ... this.
1841 (sigint_remote_token): Rename the variable to ...
1842 (async_sigint_remote_token): ... this.
1843 (initialize_sigint_signal_handler): Rename the function to ...
1844 (async_initialize_sigint_signal_handler): ... this. Update the name
1846 (handle_remote_sigint): Rename the function to ...
1847 (async_handle_remote_sigint): ... this. Update the names inside.
1848 (handle_remote_sigint_twice): Rename the function to ...
1849 (async_handle_remote_sigint_twice): ... this. Update the names inside.
1850 (cleanup_sigint_signal_handler): Rename the function to ...
1851 (async_cleanup_sigint_signal_handler): ... this.
1852 (remote_interrupt): Rename the function to ...
1853 (sync_remote_interrupt): this. Update the names inside.
1854 (remote_interrupt_twice): Rename the function to ...
1855 (sync_remote_interrupt_twice): this. Update the names inside.
1856 (remote_terminal_inferior, remote_terminal_ours, remote_wait_as)
1857 (_initialize_remote): Update the names inside.
1859 2013-08-02 Tom Tromey <tromey@redhat.com>
1862 * breakpoint.c (update_watchpoint, watchpoint_check)
1863 (watch_command_1): Update.
1864 * eval.c (fetch_subexp_value): Add "preserve_errors"
1866 * ppc-linux-nat.c (check_condition): Update.
1867 * value.h (fetch_subexp_value): Update.
1869 2013-08-02 Andrew Burgess <aburgess@broadcom.com>
1871 * mi/mi-interp.c (mi_interpreter_resume): Remove call to
1874 2013-08-01 Doug Evans <dje@google.com>
1877 * dwarf2read.c (struct dwarf2_per_cu_data): New member tu_read.
1878 (fill_in_sig_entry_from_dwo_entry): Reorganize asserts.
1879 Add assert of sig_entry->dwo_unit == NULL.
1880 (lookup_dwo_signatured_type): Don't assign TU to a DWO if the TU
1881 had already been read.
1882 (read_signatured_type): Set per_cu.tu_read.
1885 * valops.c (value_struct_elt): Add missing call to check_typedef.
1886 (value_find_oload_method_list): Ditto.
1888 * symtab.c (do_free_search_symbols_cleanup): Change arg to,
1889 effectively, struct symbol_search **.
1890 (make_cleanup_free_search_symbols): Change arg to struct
1891 symbol_search **. All callers updated.
1892 (compare_search_syms): Compare symtab file name and block as well.
1893 (search_symbols_equal): New function.
1894 (sort_search_symbols_remove_dups): Renamed from sort_search_symbols.
1895 New args new_head, new_tail. Result is now void. Remove dups after
1896 sorting the symbols.
1897 (search_symbols): Sort all found symbols once, after all have been
1898 found, and remove duplicates. Simplify cleanup tracking of result.
1899 * symtab.h (make_cleanup_free_search_symbols): Update prototype.
1901 Further workarounds for binutils/15021.
1902 * dwarf2read.c (recursively_compute_inclusions): Change type of result
1903 parameter to VEC (symtab_ptr) **. New parameter all_type_symtabs.
1904 Watch for duplicate symtabs coming from type units.
1905 (compute_symtab_includes): Update call to
1906 recursively_compute_inclusions. Build vector of included symtabs
1908 * symtab.h (symtab_ptr): New typedef.
1909 (DEF_VEC_P (symtab_ptr)): New VEC type.
1910 * linespec.c (symtab_p): Delete. All uses updated to use symtab_ptr
1913 2013-08-01 Andrew Burgess <aburgess@broadcom.com>
1915 * cli/cli-script.c (script_from_file): Remove use of
1917 * main.c (captured_main): Remove use of error_pre_print and
1919 * utils.c (error_pre_print, quit_pre_print): Remove.
1920 * utils.h (error_pre_print, quit_pre_print): Likewise.
1922 2013-08-01 Yao Qi <yao@codesourcery.com>
1924 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Parse argv
1926 (mi_cmd_stack_list_variables): Likewise.
1928 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
1930 * exceptions.c (deprecated_throw_reason): Remove.
1931 * exceptions.h (deprecated_throw_reason): Remove.
1933 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
1935 * remote-mips.c (mips_error): Replace use of
1936 deprecated_throw_reason with throw_verror. Use the error message
1937 passed to mips_error as the error message for throw_verror.
1939 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
1941 * monitor.c (monitor_interrupt_query): Replace use of
1942 deprecated_throw_reason with quit.
1943 * nto-procfs.c (interrupt_query): Likewise.
1944 * remote-fileio.c (remote_fileio_sig_exit): Likewise.
1945 * remote-mips.c (mips_kill): Likewise.
1946 * remote.c (interrupt_query): Likewise.
1948 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
1950 * utils.c (internal_verror): Replace use of deprecated_throw_reason
1953 2013-07-31 Pedro Alves <pedro@codesourcery.com>
1954 Yao Qi <yao@codesourcery.com>
1956 * tracepoint.c (trace_dump_command): Select the current frame.
1958 2013-07-30 Doug Evans <dje@google.com>
1960 * dwarf2read.c (process_queue): Add type signature to debug output.
1962 2013-07-30 Andrew Burgess <aburgess@broadcom.com>
1964 * value.c (value_fetch_lazy): Mark optimized out values as such
1965 rather than raising an error.
1967 2013-07-30 Andrew Burgess <aburgess@broadcom.com>
1969 * value.c (value_fetch_lazy): Ensure parent value is not lazy
1970 before checking which bits of the parent, not the child, value are
1973 2013-07-30 Muhammad Bilal <mbilal@codesorcery.com>
1976 * top.c: Include "filenames.h".
1977 (set_history_filename): New function.
1978 (init_main): Install it as set hook of the "set history filename"
1981 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
1983 * dwarf2read.c (dwarf2_get_ref_die_offset): Constify struct
1984 attribute parameter.
1985 (dwarf2_const_value_data): Constify struct attribute parameter.
1986 (dwarf2_const_value): Constify struct attribute parameter.
1987 (dwarf2_const_value_attr): Constify struct attribute parameter.
1988 (lookup_die_type): Constify struct attribute parameter.
1989 (dwarf2_get_attr_constant_value): Constify struct attribute parameter.
1990 (follow_die_ref_or_sig): Constify struct attribute parameter.
1991 (follow_die_ref): Constify struct attribute parameter.
1992 (follow_die_sig): Constify struct attribute parameter.
1993 (get_DW_AT_signature_type): Constify struct attribute parameter.
1994 (get_type_unit_group): Constify struct attribute parameter.
1995 (fill_in_loclist_baton): Constify struct attribute parameter.
1996 (dwarf2_symbol_mark_computed): Constify struct attribute parameter.
1997 (type_unit_group): Constify struct attribute parameter.
1999 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
2001 * dwarf2read.c (attr_form_is_block): Make argument const.
2002 (attr_form_is_section_offset): Make argument const.
2003 (attr_form_is_constant): Make argument const.
2004 (attr_form_is_ref): Make argument const.
2006 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
2008 * dwarf2read.c (attr_is_ref): Rename to attr_form_is_ref.
2010 (attr_form_is_ref): Moved below attr_form_is_constant.
2012 2013-07-29 Doug Evans <dje@google.com>
2014 * main.c (captured_command_loop): Tweak comment.
2016 * target.c (target_async_permitted_1): Fix comment.
2018 * symtab.c (iterate_over_some_symtabs): Add comment.
2020 * symtab.c (iterate_over_some_symtabs): Fix indentation.
2022 2013-07-27 Yao Qi <yao@codesourcery.com>
2024 * NEWS: Mention that GDBserver now supports hardware
2025 watchpoints on the MIPS GNU/Linux target.
2027 2013-07-27 Yao Qi <yao@codesourcery.com>
2029 * Makefile.in (HFILES_NO_SRCDIR): Add
2030 common/mips-linux-watch.h.
2031 (mips-linux-watch.o): New rule.
2032 * common/mips-linux-watch.c: New.
2033 * common/mips-linux-watch.h: New.
2034 * config/mips/linux.mh (NATDEPFILES): Add mips-linux-watch.o
2035 * mips-linux-nat.c: Include mips-linux-watch.h.
2036 (W_BIT, R_BIT, I_BIT, W_MASK, R_MASK, I_MASK, IRW_MASK): Move
2037 to common/mips-linux-watch.h.
2038 (MAX_DEBUG_REGISTER): Likewise.
2039 (enum pt_watch_style): Likewise.
2040 (struct mips32_watch_regs): Likewise.
2041 (struct mips64_watch_regs): Likewise.
2042 (struct pt_watch_regs): Likewise.
2043 (struct mips_watchpoint): Likewise.
2044 (mips_linux_watch_get_irw_mask): Move to
2045 common/mips-linux-watch.c.
2046 (get_reg_mask, mips_linux_watch_get_num_valid): Likewise.
2047 (mips_linux_watch_get_watchlo): Likewise.
2048 (mips_linux_watch_set_watchlo): Likewise.
2049 (mips_linux_watch_get_watchhi): Likewise.
2050 (mips_linux_watch_set_watchhi): Likewise.
2051 (mips_linux_read_watch_registers): Likewise.
2052 (mips_linux_watch_type_to_irw): Likewise.
2053 (mips_linux_stopped_data_address, fill_mask): Likewise.
2054 (mips_linux_watch_try_one_watch): Likewise.
2055 (mips_linux_watch_populate_regs): Likewise.
2057 2013-07-27 Yao Qi <yao@codesourcery.com>
2059 * mips-linux-nat.c (get_irw_mask): Rename to ...
2060 (mips_linux_watch_get_irw_mask): ... this. Rename parameter
2061 'set' to 'n'. Update function comment. All callers changed.
2062 (get_reg_mask): Rename parameter 'set' to 'n'. Update
2063 function comment. All callers changed.
2064 (get_num_valid): Rename to ...
2065 (mips_linux_watch_get_num_valid): ... this. Rename parameter
2066 'set' to 'n'. Update function comment. All callers changed.
2067 (get_watchlo): Rename to ...
2068 (mips_linux_watch_get_watchlo): ... this. Rename parameter
2069 'set' to 'n'. Update function comment. All callers changed.
2070 (set_watchlo): Rename to ...
2071 (mips_linux_watch_set_watchlo): ... this. Rename parameter
2072 'set' to 'n'. Update function comment. All callers changed.
2073 (get_watchhi): Rename to ...
2074 (mips_linux_watch_get_watchhi): ... this. Update function
2075 comment. All callers changed.
2076 (set_watchhi): Rename to ...
2077 (mips_linux_watch_set_watchhi): ... this. Update function
2078 comment. All callers changed.
2079 (mips_linux_read_watch_registers): Update function comment.
2080 Add new parameters 'lwpid', 'watch_readback', and
2081 'watch_readback_valid'. Update.
2082 (type_to_irw): Rename to ...
2083 (mips_linux_watch_type_to_irw): ... this. Update function
2084 comment. All callers changed.
2085 (fill_mask): Update function comment.
2086 (try_one_watch): Rename to ...
2087 (mips_linux_watch_try_one_watch): ... this. Change the type
2088 of parameter 'irw' from 'unsigned' to 'uint32_t'.
2089 (populate_regs_from_watches): Rename to ...
2090 (mips_linux_watch_populate_regs): ... this. Add parameter
2091 'current_watches'. All callers changed.
2093 2013-07-27 Yao Qi <yao@codesourcery.com>
2095 * mips-linux-nat.c (MAX_DEBUG_REGISTER): Move it earlier in
2097 (PTRACE_SET_WATCH_REGS, enum pt_watch_style): Remove.
2098 (struct mips32_watch_regs, struct mips64_watch_regs): Remove.
2099 (struct pt_watch_regs): Likewise.
2100 [!PTRACE_GET_WATCH_REGS] (PTRACE_SET_WATCH_REGS): New macro.
2101 [!PTRACE_GET_WATCH_REGS] (enum pt_watch_style): New.
2102 [!PTRACE_GET_WATCH_REGS] (struct mips32_watch_regs): New.
2103 [!PTRACE_GET_WATCH_REGS] (struct mips64_watch_regs): New.
2104 [!PTRACE_GET_WATCH_REGS] (struct pt_watch_regs): New.
2106 2013-07-27 Yao Qi <yao@codesourcery.com>
2108 * breakpoint.h: Include break-common.h.
2109 (enum target_hw_bp_type): Move to ...
2110 * common/break-common.h: ... here. New.
2112 2013-07-26 Cyril Nikolaev <cyril@nichtverstehen.de>
2114 * inflow.c (terminal_init_inferior_with_pgrp): Save inferior
2115 process group regardless of having tty on stdin.
2117 2013-07-25 Doug Evans <dje@google.com>
2119 * linux-fork.h (detach_fork): Delete.
2121 2013-07-25 Tom Tromey <tromey@redhat.com>
2123 PR remote/15256, PR remote/15266:
2124 * bfd-target.c (target_bfd_reopen): Initialize to_magic.
2125 * monitor.c (monitor_detach): Use unpush_target.
2126 * remote-m32r-sdi.c (m32r_detach): Use unpush_target.
2127 * remote-mips.c (mips_detach): Use unpush_target. Don't
2129 * remote-sim.c (gdbsim_detach): Use unpush_target.
2130 * target.c (pop_target): Remove.
2131 (pop_all_targets_above): Don't call target_close.
2132 (target_close): Assert that the target is unpushed.
2133 * target.h (pop_target): Don't declare.
2134 * tracepoint.c (tfile_open): Use unpush_target.
2136 2013-07-25 Tom Tromey <tromey@redhat.com>
2138 * linux-thread-db.c (init_thread_db_ops): Call
2139 complete_target_initialization.
2140 (_initialize_thread_db): Don't call add_target.
2141 * target.c (complete_target_initialization): New function.
2142 (add_target_with_completer): Call it.
2143 * target.h (complete_target_initialization): Declare.
2145 2013-07-25 Mark Kettenis <kettenis@gnu.org>
2147 * hppa-tdep.h (enum hppa_regnum): Add members for all space registers.
2148 * hppaobsd-tdep.c (HPPAOBSD_SIZEOF_GREGS): Add comment.
2149 (HPPANBSD_SIZEOF_GREGS): New define.
2150 (hppaobsd_supply_gregset): Handle additional registers.
2151 * hppabsd-nat.c (hppabsd_gregset_supplies_p): Adjust to indicate
2152 we provide more registers now.
2153 (hppabsd_supply_gregset): Supply additional registers.
2154 (hppabsd_collect_gregset): Collect additional registers.
2156 2013-07-25 Mark Kettenis <kettenis@gnu.org>
2158 * hppabsd-tdep.c: Include "dwarf2-frame.h".
2159 (hppabsd_dwarf2_frame_init_reg): New function.
2160 (hppabsd_init_abi): Hook in the DWARF CFI frame unwinder.
2162 2013-07-25 Andrew Burgess <aburgess@broadcom.com>
2164 * mi/mi-main.c (output_register): Make MI 'r' format use standard
2165 'z' format code. Remove error for optimized out values, standard
2166 code will handle these fine.
2168 2013-07-25 Andrew Burgess <aburgess@broadcom.com>
2170 * NEWS: Mention new 'z' formatter.
2171 * printcmd.c (print_scalar_formatted): Add new 'z' formatter.
2172 (_initialize_printcmd): Mention 'z' formatter in help text of the
2175 2013-07-24 Maciej W. Rozycki <macro@codesourcery.com>
2177 * mips-tdep.c (micromips_deal_with_atomic_sequence): Correct
2180 2013-07-24 Sergio Durigan Junior <sergiodj@redhat.com>
2182 * breakpoint.c (create_longjmp_master_breakpoint): Check if probe
2183 interface can evaluate arguments. Fallback to the old mode if it
2185 (create_exception_master_breakpoint): Likewise.
2186 * elfread.c (elf_can_evaluate_probe_arguments): New function.
2187 (struct sym_probe_fns elf_probe_fns): Export function above to the
2189 * probe.c (can_evaluate_probe_arguments): New function.
2190 * probe.h (struct probe_ops) <can_evaluate_probe_arguments>: New
2192 (can_evaluate_probe_arguments): New function prototype.
2193 * solib-svr4.c (svr4_create_solib_event_breakpoints): Check if
2194 probe interface can evaluate arguments. Fallback to the old mode
2196 * stap-probe.c (stap_get_probe_argument_count): Check if probe
2197 interface can evaluate arguments. Warning the user if it cannot.
2198 (stap_can_evaluate_probe_arguments): New function.
2199 (struct probe_ops stap_probe_ops): Export function above to the
2201 * symfile.h (struct sym_probe_fns) <can_evaluate_probe_arguments>:
2202 New function pointer.
2204 2013-07-24 Luis Machado <lgustavo@codesourcery.com>
2206 * Makefile.in (SFILES): Add common/target-common.c.
2207 Add common/target-common.h to headers.
2208 (COMMON_OBS): Add target-common.o.
2209 (target-common.o): New target.
2210 * linux-nat.h (resume_kind): Move to common/target-common.h.
2211 * target.c (target_waitstatus_to_string): Move to
2212 common/target-common.c.
2213 * target.h: Include target-common.h.
2214 (target_waitkind): Move to common/target-common.h.
2215 (target_waitstatus): Likewise.
2216 (TARGET_WNOHANG): Likewise.
2217 * common/target-common.c: New file.
2218 * common/target-common.h: New file.
2220 2013-07-24 Doug Evans <dje@google.com>
2222 * dwarf2read.c (lookup_dwo_cutu): Change missing DWO complaint to
2225 2013-07-23 Yao Qi <yao@codesourcery.com>
2227 * i386-tdep.c (i386_in_stack_tramp_p): Remove unused
2228 parameter 'gdbarch'.
2229 (i386_stack_tramp_frame_sniffer): Caller update.
2230 * i386-linux-tdep.c (i386_linux_core_read_xcr0): Remove
2231 parameter 'gdbarch' and 'target'.
2232 (i386_linux_core_read_description): Caller update.
2233 * amd64-linux-tdep.c (amd64_linux_core_read_description):
2235 * i386-linux-tdep.h (i386_linux_core_read_xcr0): Update
2238 2013-07-23 Tom Tromey <tromey@redhat.com>
2240 * dwarf2read.c (init_cutu_and_read_dies): Revert patch from
2243 2013-07-22 Doug Evans <dje@google.com>
2245 * exec.h (remove_target_sections): Delete arg abfd.
2246 * exec.c (exec_close): Update call to remove_target_sections.
2247 (remove_target_sections): Delete arg abfd.
2248 * solib.c (update_solib_list): Ditto.
2249 (reload_shared_libraries_1): Ditto.
2250 (clear_solib): Ditto, and unconditionally call remove_target_sections.
2251 * target.h (struct target_section): Rename key to owner.
2254 2013-07-22 Tom Tromey <tromey@redhat.com>
2256 * solib-som.c (som_open_symbol_file_object): Call do_cleanups.
2258 2013-07-22 Tom Tromey <tromey@redhat.com>
2260 * dwarf2read.c (init_cutu_and_read_dies): Remove 'free_cu_cleanup'.
2261 Simplify cleanup handling.
2263 2013-07-22 Tom Tromey <tromey@redhat.com>
2265 * dwarf2read.c (dwarf_decode_line_header): Call do_cleanups
2266 on all return paths.
2268 2013-07-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2270 * ppc-linux-nat.c (PPC_DEBUG_FEATURE_DATA_BP_DAWR): New define.
2271 (ppc_linux_region_ok_for_hw_watchpoint): Add checking to use the new
2272 DAWR interface for longer ranges hardware watchpoint (up to 512 bytes).
2274 2013-07-22 Phil Muldoon <pmuldoon@redhat.com>
2276 * top.c (print_gdb_version): Add help, apropos description and
2277 url to online documentation.
2279 2013-07-19 Hui Zhu <hui@codesourcery.com>
2282 * mi/mi-cmd-break.c (mi_argv_to_format): Handle double quotes.
2284 2013-07-19 Yao Qi <yao@codesourcery.com>
2286 * target.c (update_current_target): Change the default action
2287 of 'to_traceframe_info' from tcomplain to return_zero.
2288 * target.h (struct target_ops) <to_traceframe_info>: Add more
2290 * valops.c (read_value_memory): Call
2291 traceframe_available_memory unconditionally.
2293 2013-07-18 Yao Qi <yao@codesourcery.com>
2295 * coffread.c (coff_symfile_read): Iterate over minimal symbols,
2296 if the name is prefixed by "__imp_" or "_imp_", look for minimal
2297 symbol without prefix. If found, set its type to
2298 'mst_solib_trampoline'.
2300 2013-07-17 Doug Evans <dje@google.com>
2302 * NEWS: Mention "set print raw frame-arguments".
2303 * gdbcmd.h (setprintrawlist, showprintrawlist): Declare.
2304 * stack.c (print_raw_frame_arguments): New static global.
2305 (print_frame_arg): Set opts.raw from print_raw_frame_arguments.
2306 (_initialize_stack): New command "set/show print raw frame-arguments".
2307 * valprint.c (setprintrawlist, showprintrawlist): New globals.
2308 (set_print_raw, show_print_raw): New functions.
2309 (_initialize_valprint): New prefix command "set/show print raw".
2310 * valprint.h (value_print_options): Improve comments.
2312 * cli/cli-cmds.c (init_cmd_lists): Delete unnecessary initialization
2313 of all *list variables.
2315 * gdbcmd.h (togglelist): Delete.
2316 * cli/cli-cmds.c (togglelist): Delete.
2317 (init_cmd_lists): Update.
2318 * cli/cli-cmds.h (togglelist): Delete.
2320 2013-07-17 Tom Tromey <tromey@redhat.com>
2322 * dwarf2read.c (dwarf2_per_objfile_free): Clear
2325 2013-07-16 Doug Evans <dje@google.com>
2327 * nto-tdep.c (nto_relocate_section_addresses): Update,
2328 target_section.bfd deleted.
2329 * ppc64-tdep.c (ppc64_convert_from_func_ptr_addr): Ditto.
2330 * s390-tdep.c (s390_load): Ditto.
2331 * solib-aix.c (solib_aix_relocate_section_addresses): Ditto.
2333 2013-07-16 Andrew Burgess <aburgess@broadcom.com>
2335 * common/format.c (parse_format_string): Add checks for NULL
2336 character before calling strchr.
2338 2013-07-16 Doug Evans <dje@google.com>
2340 * solist.h (target_so_ops.find_and_open_solib): Clarify usage of
2341 temp_pathname argument.
2342 * nto-tdep.c (nto_find_and_open_solib): Fix setting of temp_pathname
2343 when opening the file fails.
2345 * target.h (struct target_section): Delete member bfd.
2346 All users updated to use the_bfd_section->owner instead.
2347 * exec.c (add_to_section_table): Assert bfd is expected value.
2348 Remove initialization of target_section.bfd.
2349 (remove_target_sections): Update.
2350 (section_table_available_memory): Update.
2351 (section_table_xfer_memory_partial): Update.
2352 (print_section_info): Update.
2353 (exec_set_section_address): Update.
2354 * record-full.c (record_full_core_xfer_partial): Update.
2355 * solib-svr4.c (svr4_relocate_section_addresses): Update.
2356 * solib-target.c (solib_target_relocate_section_addresses): Update.
2357 * symfile.c (build_section_addr_info_from_section_table): Update.
2358 * target.c (memory_xfer_live_readonly_partial): Update.
2359 (memory_xfer_partial_1): Update.
2361 2013-07-15 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2363 * ppc-linux-nat.c: Since the new PowerPC specific ptrace interface is
2364 now available for embedded (BookE) and server (BookS) processors,
2365 correct mentions of 'booke' and adjust comments accordingly in order to
2366 avoid confusion. Rename struct 'booke_debug_info' to 'hwdebug_info'.
2367 (have_ptrace_booke_interface): Rename function and variable
2368 'have_ptrace_booke_interface' to 'have_ptrace_hwdebug_interface'.
2369 Rename struct 'booke_debug_info' to 'hwdebug_info'. Update all uses.
2370 (booke_cmp_hw_point): Rename function 'booke_cmp_hw_point' to
2371 'hwdebug_point_cmp'. Update all uses.
2372 (booke_find_thread_points_by_tid): Rename function
2373 'booke_find_thread_points_by_tid' to
2374 'hwdebug_find_thread_points_by_tid'. Update all uses.
2375 (booke_insert_point): Rename function 'booke_insert_point' to
2376 'hwdebug_insert_point'. Update all uses.
2377 (booke_remove_point): Rename function 'booke_remove_point' to
2378 'hwdebug_remove_point'. Update all uses.
2380 2013-07-15 Maciej W. Rozycki <macro@codesourcery.com>
2382 * mips-tdep.c (mips_gdbarch_init): Replace hardcoded magic
2383 numbers with enum values.
2385 2013-07-15 Ali Anwar <ali_anwar@codesourcery.com>
2388 * thread.c (thread_apply_all_command): Check for valid threads
2390 (thread_array_cleanup): New struct.
2391 (set_thread_refcount): New function.
2393 2013-07-11 Andrew Burgess <aburgess@broadcom.com>
2395 * infcmd.c (default_print_one_register_info): Reuse function
2398 2013-07-10 Tom Tromey <tromey@redhat.com>
2400 * Makefile.in (GDB_WARN_CFLAGS_NO_DEFS, ADA_EXP_C): New macros.
2401 (ada-exp.o): New target.
2403 2013-07-10 Sergio Durigan Junior <sergiodj@redhat.com>
2405 * mt-tdep.c (mt_registers_info): Call
2406 get_no_prettyformat_print_options instead of
2407 get_raw_print_options (regression by last patch from Doug
2410 2013-07-09 Pedro Alves <palves@redhat.com>
2412 Checked in by Joel Brobecker <brobecker@adacore.com>.
2413 * ada-lang.c (coerce_unspec_val_to_type): Use
2414 value_optimized_out_const.
2415 * value.c (value_optimized_out_const): New function.
2416 * value.h (value_optimized_out_const): New declaration.
2418 2013-07-09 Doug Evans <dje@google.com>
2420 * defs.h (enum val_prettyformat): Renamed from val_prettyprint.
2421 Enum values rename as well. All uses updated.
2422 * valprint.h (value_print_options): Rename member pretty to
2423 pretty format. Rename member prettyprint_arrays to
2424 prettyformat_arrays. Rename member prettyprint_structs to
2425 prettyformat_structs. All uses updated.
2426 (get_no_prettyformat_print_options): Renamed from
2427 get_raw_print_options.
2428 * valprint.c (get_no_prettyformat_print_options): Renamed from
2429 get_raw_print_options. All callers updated.
2430 (show_prettyformat_structs): Renamed from show_prettyprint_structs.
2431 All callers updated.
2432 (show_prettyformat_arrays): Renamed from show_prettyprint_arrays.
2433 All callers updated.
2434 (_initialize_valprint): Improve help text for "set print pretty" and
2437 2013-07-09 Andrew Burgess <aburgess@broadcom.com>
2439 * value.c (value_bits_valid): Revert previous change, and change
2440 by Pedro on 2013-07-04, due to regressions in
2441 gdb.dwarf2/implptr.exp and gdb.dwarf2/pieces.exp.
2443 2013-07-08 Andrew Burgess <aburgess@broadcom.com>
2444 Pedro Alves <palves@redhat.com>
2446 * value.c (value_bits_valid): If the value is not lval_computed
2447 or has no check validity handler then the answer is the
2448 optimized_out flag, otherwise defer to the handler.
2450 2013-07-06 Eli Zaretskii <eliz@gnu.org>
2452 * top.c (print_gdb_configuration): Explain in output of
2453 --configuration what does "relocatable" mean.
2455 * main.c (print_gdb_help): Regroup options in the --help text.
2456 See http://sourceware.org/ml/gdb-patches/2013-04/msg00362.html for
2457 the relevant discussions.
2459 2013-07-06 Yao Qi <yao@codesourcery.com>
2461 * breakpoint.h (struct breakpoint_ops) <create_breakpoints_sal>:
2462 Remove parameter 'lsal'.
2463 * breakpoint.c (create_breakpoint): Move local variable 'lsal'
2464 to inner block. Caller update.
2465 (base_breakpoint_create_breakpoints_sal): Update.
2466 (bkpt_create_breakpoints_sal): Likewise.
2467 (tracepoint_create_breakpoints_sal): Likewise.
2468 (strace_marker_create_breakpoints_sal): Get 'lsal' from the
2469 element 0 of vector 'canonical->sals'.
2471 2013-07-05 Luis Machado <lgustavo@codesourcery.com>
2473 * rs6000-tdep.c (rs6000_stab_reg_to_regnum): Return the real
2474 register number instead of the pseudo register one.
2475 (rs6000_dwarf2_reg_to_regnum): Likewise.
2477 2013-07-04 Pedro Alves <palves@redhat.com>
2479 * findvar.c (value_of_register): Use allocate_optimized_out_value
2480 if the register has been optimized out, instead of
2481 set_value_optimized_out.
2482 * frame-unwind.c (frame_unwind_got_optimized): Use
2483 allocate_optimized_out_value.
2485 2013-07-04 Pedro Alves <palves@redhat.com>
2487 * value.c (value_bits_valid): If the value is not lval_computed,
2488 or doesn't have a check_validity hook, assume the value is entirely
2491 2013-07-04 Andrew Burgess <aburgess@broadcom.com>
2493 * stack.c (read_frame_arg): No longer fetch lazy values.
2494 * value.c (value_optimized_out): If the value is not already
2495 marked optimized out, and is lazy then fetch it.
2496 (value_primitive_field): Move optimized out check to later in the
2497 function, after we have loaded any lazy values.
2498 (value_fetch_lazy): Use optimized out flag directly rather than
2499 calling optimized_out method.
2501 2013-07-04 Andrew Burgess <aburgess@broadcom.com>
2503 * valops.c: Don't include "user-regs.h".
2504 (value_fetch_lazy): Moved to value.c.
2505 * value.c: Include "user-regs.h".
2506 (value_fetch_lazy): Moved from valops.c.
2508 2013-07-04 Yao Qi <yao@codesourcery.com>
2511 2013-06-27 Yao Qi <yao@codesourcery.com>
2513 * common/create-version.sh: Update comments. Handle the case
2514 that TARGET_ALIAS is empty.
2516 2013-07-03 Pedro Alves <palves@redhat.com>
2518 * Makefile.in (config.status): Depend on development.sh.
2519 (aclocal_m4_deps): Add libmcheck.m4.
2520 * acinclude.m4: Include libmcheck.m4.
2521 * configure.ac: Source development.sh instead of setting
2522 'development' here. --enable-libmcheck/--disable-libmcheck code
2523 factored out to GDB_AC_LIBMCHECK. Run it.
2524 * development.sh: New file.
2525 * libmcheck.m4: New file.
2526 * configure: Regenerate.
2528 2013-07-02 Tom Tromey <tromey@redhat.com>
2530 * contrib/ari/update-web-ari.sh: Update for version.in change.
2532 2013-07-02 Tom Tromey <tromey@redhat.com>
2534 * common/ptid.h: Comment fixes.
2536 2013-07-01 Tom Tromey <tromey@redhat.com>
2538 * dwarf2read.c (dwarf2_get_dwz_file): Return NULL if
2539 .gnu_debugaltlink not found. Use bfd_get_alt_debug_link_info.
2540 (dwarf2_read_index, create_all_comp_units): Update.
2542 2013-07-01 Tom Tromey <tromey@redhat.com>
2544 * configure.ac (build_warnings): Add -Wold-style-definition.
2545 * configure: Rebuild.
2546 * machoread.c (_initialize_machoread): Use "(void)".
2547 * macrocmd.c (macro_inform_no_debuginfo): Fix formatting;
2550 2013-07-01 Tom Tromey <tromey@redhat.com>
2552 * configure.ac (build_warnings): Add -Wold-style-declaration.
2553 * configure: Rebuild.
2554 * dsrec.c (make_srec): Use "static const", not "const static".
2555 * h8300-tdep.c (h8300_breakpoint_from_pc): Use "static const",
2557 * mi/mi-parse.c (mi_no_values, mi_simple_values, mi_all_values):
2558 Use "static const", not "const static".
2559 * mn10300-tdep.c (mn10300_breakpoint_from_pc): Use "static const",
2561 * moxie-tdep.c (moxie_breakpoint_from_pc): Use "static const",
2563 * rs6000-tdep.c (rs6000_breakpoint_from_pc): Use "static const",
2565 * v850-tdep.c (v850_breakpoint_from_pc): Use "static const",
2567 (v850_dbtrap_breakpoint_from_pc): Likewise.
2568 * xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Use "static const",
2571 2013-07-01 Tom Tromey <tromey@redhat.com>
2573 * configure.ac (build_warnings): Add -Wmissing-parameter-type.
2574 * configure: Rebuild.
2576 2013-07-01 Pedro Alves <palves@redhat.com>
2578 * defs.h: Include "pathmax.h".
2579 * utils.c: Don't include sys/param.h.
2580 (gdb_realpath): Remove code that checks for MAXPATHLEN.
2581 * solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
2582 instead of MAXPATHLEN.
2583 * solib-sunos.c: Don't include sys/param.h.
2584 * xcoffread.c: Don't include sys/param.h.
2585 * bsd-kvm.c: Don't include sys/param.h.
2586 * darwin-nat.c: Don't include sys/param.h.
2587 (darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
2588 * darwin-nat-info.c: Don't include sys/param.h.
2589 * fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
2591 * i386obsd-nat.c: Don't include sys/param.h.
2592 * inf-child.c: Don't include sys/param.h.
2593 (inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
2594 * linux-fork.c: Don't include sys/param.h.
2595 (fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
2596 * linux-nat.c: Don't include sys/param.h.
2597 (linux_child_pid_to_exec_file, linux_proc_pending_signals)
2598 (linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
2599 * m68klinux-nat.c: Don't include sys/param.h.
2600 * nbsd-nat.c: Don't include sys/param.h.
2601 (nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
2602 * ppc-linux-nat.c: Don't include sys/param.h.
2603 * rs6000-nat.c: Don't include sys/param.h.
2604 * spu-linux-nat.c. Don't include sys/param.h.
2605 * windows-nat.c: Don't include sys/param.h.
2606 * xtensa-linux-nat.c: Don't include sys/param.h.
2607 * config/i386/nm-fbsd.h: Don't include sys/param.h.
2609 2013-07-01 Pedro Alves <palves@redhat.com>
2611 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add pathmax.
2612 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/pathmax.m4.
2613 * gnulib/aclocal.m4: Regenerate.
2614 * gnulib/config.in: Regenerate.
2615 * gnulib/configure: Regenerate.
2616 * gnulib/import/pathmax.h: New file.
2617 * gnulib/import/Makefile.am: Regenerate.
2618 * gnulib/import/Makefile.in: Regenerate.
2619 * gnulib/import/m4/gnulib-cache.m4: Regenerate.
2620 * gnulib/import/m4/gnulib-comp.m4: Regenerate.
2621 * gnulib/import/m4/pathmax.m4: New file.
2623 2013-07-01 Pedro Alves <palves@redhat.com>
2625 * configure.ac (GDBINIT): Define, depending on host.
2626 * go32-nat.c (init_go32_ops): Don't override gdbinit here.
2627 * top.c (PATH_MAX): Delete fallback definition.
2628 (GDBINIT_FILENAME): Delete.
2629 (gdbinit): Reimplement as const char array set to the GDBINIT
2631 * top.h (gdbinit): Make const.
2632 * configure, config.in: Regenerate.
2634 2013-07-01 Pedro Alves <palves@redhat.com>
2636 * cli/cli-cmds.c (source_script): Make 'file' parameter const.
2637 * cli/cli-cmds.h (source_script): Likewise.
2638 * exceptions.c (catch_command_errors_const): New function.
2639 * exceptions.h (catch_command_errors_const): Declare.
2640 * main.c (get_init_files): Make parameters const, and adjust.
2641 (captured_main): Make 'system_gdbinit', 'home_gdbinit' and
2642 'local_gdbinit' locals const. Adjust to use
2643 catch_command_errors_const.
2644 (print_gdb_help): Make 'system_gdbinit', 'home_gdbinit' and
2645 'local_gdbinit' locals const.
2647 2013-07-01 Pedro Alves <palves@redhat.com>
2649 * defs.h: Don't check HAVE_UNISTD_H before including <unistd.h>.
2650 (STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO): Delete.
2651 * tracepoint.c: Don't check HAVE_UNISTD_H before including
2654 2013-07-01 Pedro Alves <palves@redhat.com>
2656 Import the "unistd" gnulib module.
2657 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add "unistd".
2658 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/off_t.m4,
2659 import/m4/ssize_t.m4, import/m4/sys_types_h.m4 and
2660 import/m4/unistd_h.m4.
2661 * gnulib/aclocal.m4: Renenerate.
2662 * gnulib/config.in: Renenerate.
2663 * gnulib/configure: Renenerate.
2664 * gnulib/import/Makefile.am: Renenerate.
2665 * gnulib/import/Makefile.in: Renenerate.
2666 * gnulib/import/m4/gnulib-cache.m4: Renenerate.
2667 * gnulib/import/m4/gnulib-comp.m4: Renenerate.
2668 * gnulib/import/m4/off_t.m4: New file.
2669 * gnulib/import/m4/ssize_t.m4: New file.
2670 * gnulib/import/m4/sys_types_h.m4: New file.
2671 * gnulib/import/m4/unistd_h.m4: New file.
2672 * gnulib/import/sys_types.in.h: New file.
2673 * gnulib/import/unistd.c: New file.
2674 * gnulib/import/unistd.in.h: New file.
2676 2013-07-01 Pedro Alves <palves@redhat.com>
2678 * utils.c <pathconf/_PC_PATH_MAX use>: Check if _PC_PATH_MAX is
2679 defined instead of checking HAVE_UNISTD_H.
2681 2013-07-01 Pedro Alves <palves@redhat.com>
2683 Reimport gnulib from scratch.
2684 * gnulib/Makefile.in (aclocal_m4_deps): Remove reference to
2685 import/m4/onceonly.m4.
2686 * gnulib/aclocal.m4: Renegerate.
2687 * gnulib/config.in: Renegerate.
2688 * gnulib/configure: Renegerate.
2689 * gnulib/import/Makefile.in: Renegerate.
2690 * gnulib/import/extra/update-copyright: Renegerate.
2691 * gnulib/import/m4/onceonly.m4: Delete.
2693 2013-07-01 Pedro Alves <palves@redhat.com>
2695 * tui/tui-regs.c (pagination_enabled): Delete declaration.
2697 2013-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
2700 * remote.c (async_remote_interrupt_twice): Make it static.
2701 * remote.h (async_remote_interrupt_twice): Remove the declaration.
2703 2013-06-29 Sergio Durigan Junior <sergiodj@redhat.com>
2705 * ia64-linux-tdep.c: Include <ctype.h>.
2706 (ia64_linux_stap_is_single_operand): New function.
2707 (ia64_linux_init_abi): Initialize SystemTap related attributes.
2709 2013-06-28 Tom Tromey <tromey@redhat.com>
2711 * Makefile.in (version.c): Use version.in, not
2713 * common/create-version.sh: Likewise.
2714 * common/version.in: Move...
2715 * version.in: ...here.
2717 2013-06-28 Pedro Alves <palves@redhat.com>
2719 * infrun.c (set_observer_mode): Don't declare pagination_enabled
2721 * utils.h (pagination_enabled): Declare.
2723 2013-06-28 Pedro Alves <palves@redhat.com>
2725 * infrun.c (non_stop, non_stop_1, set_non_stop, show_non_stop):
2726 Move higher up in file.
2728 2013-06-28 Tom Tromey <tromey@redhat.com>
2730 * tracepoint.c (deprecated_readline_begin_hook)
2731 (deprecated_readline_hook, deprecated_readline_end_hook): Don't
2734 2013-06-28 Pedro Alves <palves@redhat.com>
2737 * tui/tui-regs.c (tui_get_register): Fetch value contents before
2738 checking if they're available.
2739 * value.c (value_available_contents_eq): Change comment.
2740 * value.h (value_available_contents_eq): Expand comment.
2742 2013-06-27 Tom Tromey <tromey@redhat.com>
2744 * target.c (find_run_target): Remove.
2745 * target.h (find_run_target): Remove.
2747 2013-06-27 Tom Tromey <tromey@redhat.com>
2749 * corelow.c (core_gdbarch): Now static.
2751 2013-06-27 Tom Tromey <tromey@redhat.com>
2753 * target.c (target_struct_index): Remove.
2755 2013-06-27 Pedro Alves <palves@redhat.com>
2757 * infrun.c: Remove comment describing the 'stepping over runtime
2758 loader dynamic symbol resolution code' mechanism; moved to
2761 2013-06-27 Pedro Alves <palves@redhat.com>
2763 * exceptions.c (catch_command_errors): Remove spurious space.
2764 * exceptions.h (catch_command_errors): Second parameter is "arg",
2767 2013-06-27 Yao Qi <yao@codesourcery.com>
2769 * common/create-version.sh: Update comments. Handle the case
2770 that TARGET_ALIAS is empty.
2772 2013-06-26 Pedro Alves <palves@redhat.com>
2774 * infrun.c (SOLIB_IN_DYNAMIC_LINKER): Delete macro and describing
2777 2013-06-26 Pedro Alves <palves@redhat.com>
2779 * infrun.c: Update comments on stepping over runtime loader
2780 dynamic symbol resolution code.
2782 2013-06-26 Sergio Durigan Junior <sergiodj@redhat.com>
2784 * ax-gdb.h (union exp_element): Forward declare.
2785 * parser-defs.h: Include expression.h.
2787 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
2789 * mips-tdep.c (fetch_mips_16): Use unmake_compact_addr.
2791 2013-06-26 Dmitry Kozlov <ddk@codesourcery.com>
2793 * tracepoint.c (trace_save): Extend tsave to save starttime, stoptime.
2795 2013-06-26 Dmitry Kozlov <ddk@codesourcery.com>
2797 Fix trace-status to output proper start-time and stop-time.
2798 * tracepoint.c (trace_status_command): Fix type of printf arg to
2799 prevent improper type conversion.
2800 (trace_status_mi): Likewise.
2802 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
2804 * mips-tdep.c (mips_next_pc): Fix a typo.
2806 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
2808 * mips-tdep.c (micromips_scan_prologue): Fix a typo.
2810 2013-06-26 Pedro Alves <pedro@codesourcery.com>
2811 Yao Qi <yao@codesourcery.com>
2813 * mi/mi-cmds.c (mi_cmds): Register -trace-frame-collected.
2814 * mi/mi-cmds.h (mi_cmd_trace_frame_collected): Declare.
2815 * mi/mi-main.c (print_variable_or_computed): New function.
2816 (mi_cmd_trace_frame_collected): New function.
2817 * tracepoint.c (find_trace_state_variable_by_number): New.
2818 (struct traceframe_info): Move to tracepoint.h
2819 (struct collection_list): Likewise.
2820 (do_collect_symbol): Include locals and arguments in the
2821 collected variables list.
2822 (clear_collection_list): Clear wholly collected variables list
2823 and computed variables list.
2824 (append_exp): New function.
2825 (encode_actions_1): Include variables in the wholly
2826 collected variables list. Include memory ranges and
2827 full-fledged expressions in the computed expressions list.
2828 (encode_actions): Move some code to ...
2829 Return the cleanup chain.
2830 (encode_actions_rsp): ... here. New function.
2831 (get_traceframe_location, get_traceframe_info): Remove static.
2832 * tracepoint.h (struct memrange): Moved from tracepoint.c.
2833 (struct collection_list): Moved from tracepoint.c. Add two
2834 new fields 'wholly_collected' and 'computed'.
2835 (find_trace_state_variable_by_number): Declare.
2836 (encode_actions): Adjust declaration.
2837 (encode_actions_rsp): Declare.
2838 (get_traceframe_info, get_traceframe_location): Declare.
2840 * NEWS: Mention new MI command -trace-frame-collected.
2842 2013-06-26 Pedro Alves <pedro@codesourcery.com>
2843 Yao Qi <yao@codesourcery.com>
2845 * ctf.c (ctf_traceframe_info): Push trace state variables
2846 present in the trace data into the traceframe info object.
2847 * breakpoint.c (DEF_VEC_I): Remove.
2848 * common/filestuff.c (DEF_VEC_I): Likewise.
2849 * dwarf2loc.c (DEF_VEC_I): Likewise.
2850 * mi/mi-main.c (DEF_VEC_I): Likewise.
2851 * common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
2852 * features/traceframe-info.dtd: Add tvar element and its
2854 * tracepoint.c (free_traceframe_info): Free vector 'tvars'.
2855 (build_traceframe_info): Push trace state variables present in
2856 the trace data into the traceframe info object.
2857 (traceframe_info_start_tvar): New function.
2858 (tvar_attributes): New.
2859 (traceframe_info_children): Add "tvar" element.
2860 * tracepoint.h (struct traceframe_info) <tvars>: New field.
2862 * NEWS: Mention the change in GDB and GDBserver.
2864 2013-06-26 Pedro Alves <pedro@codesourcery.com>
2865 Yao Qi <yao@codesourcery.com>
2867 * tracepoint.c (trace_dump_command): Move code to ...
2868 (get_traceframe_location): ... here. New.
2870 2013-06-26 Pedro Alves <pedro@codesourcery.com>
2871 Yao Qi <yao@codesourcery.com>
2873 * tracepoint.c (trace_dump_command): GDB emits an error
2874 instead of a warning when a traceframe is not selected.
2876 2013-06-26 Pedro Alves <pedro@codesourcery.com>
2877 Yao Qi <yao@codesourcery.com>
2879 * tracepoint.c (tracepoint_list, stepping_list): Remove.
2880 (clear_collection_list): Free fields 'aexpre_list' and 'list'
2882 (do_clear_collection_list, init_collection_list): New.
2883 (encode_actions): Add local variables 'tracepoint_list' and
2884 'stepping_list'. Call init_collection_list and make cleanup
2885 which calls do_clear_collection_list. Don't call
2886 clear_collection_list.
2887 (_initialize_tracepoint): Delete references to
2888 'tracepoint_list' and 'stepping_list'.
2890 2013-06-25 Tom Tromey <tromey@redhat.com>
2892 * common/create-version.sh (date): Use "$", not "$$" in sed
2895 2013-06-25 Kevin Buettner <kevinb@redhat.com>
2897 * NEWS (New targets): Add entry for TI MSP430.
2899 2013-06-25 Yao Qi <yao@codesourcery.com>
2901 * remote.c (remote_start_remote): Move code to upload tsv
2904 2013-06-25 Yao Qi <yao@codesourcery.com>
2905 Hui Zhu <hui@codesourcery.com>
2906 Pedro Alves <palves@redhat.com>
2908 PR breakpoints/15075
2909 PR breakpoints/15434
2910 * breakpoint.c (bpstat_stop_status): Call
2911 b->ops->after_condition_true.
2912 (update_dprintf_command_list): Don't append "continue" command
2913 to the command list of dprintf breakpoint.
2914 (base_breakpoint_after_condition_true): New function.
2915 (base_breakpoint_ops): Add base_breakpoint_after_condition_true.
2916 (dprintf_after_condition_true): New function.
2917 (initialize_breakpoint_ops): Set dprintf_after_condition_true.
2918 * breakpoint.h (breakpoint_ops): Add after_condition_true.
2920 2013-06-24 Kevin Buettner <kevinb@redhat.com>
2922 * Makefile.in (ALL_TARGET_OBS): Add msp430-tdep.o.
2923 (ALLDEPFILES): Add msp430-tdep.c.
2924 * configure.tgt (msp430*-*-elf): New target.
2925 * msp430-tdep.c: New file.
2927 2013-06-24 Maciej W. Rozycki <macro@codesourcery.com>
2929 * mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
2930 microMIPS synthetic symbols.
2932 2013-06-24 Maciej W. Rozycki <macro@codesourcery.com>
2934 * objfiles.h (pc_in_section): New prototype.
2935 (in_plt_section): Remove name argument, replace prototype with
2936 static inline function.
2937 * mips-tdep.h: Include "objfiles.h".
2938 (in_mips_stubs_section): New function.
2939 * hppa-tdep.h (gdbarch_tdep): Remove name argument of
2940 in_solib_call_trampoline member.
2941 (hppa_in_solib_call_trampoline): Remove name argument.
2942 * objfiles.c (pc_in_section): New function.
2943 (in_plt_section): Remove function.
2944 * mips-linux-tdep.c: Include "objfiles.h".
2945 (mips_linux_in_dynsym_stub): Call in_mips_stubs_section. Remove
2946 name argument. Return 1 rather than the low 16-bit halfword of
2947 any instruction examined.
2948 (mips_linux_in_dynsym_resolve_code): Update
2949 mips_linux_in_dynsym_stub call accordingly.
2950 * mips-tdep.c (mips_stub_frame_sniffer): Use in_mips_stubs_section
2951 rather than an equivalent hand-coded sequence.
2952 * hppa-hpux-tdep.c (in_opd_section): Remove function.
2953 (hppa32_hpux_in_solib_call_trampoline): Remove name argument.
2954 (hppa64_hpux_in_solib_call_trampoline): Likewise.
2955 (hppa64_hpux_find_global_pointer): Use pc_in_section rather than
2957 * hppa-tdep.c (hppa_stub_unwind_sniffer): Remove name argument
2958 on call to tdep->in_solib_call_trampoline.
2959 (hppa_in_solib_call_trampoline): Remove name argument, update
2960 according to in_plt_section change.
2961 (hppa_skip_trampoline_code): Update according to in_plt_section
2963 * aarch64-tdep.c (aarch64_stub_unwind_sniffer): Likewise.
2964 * arm-symbian-tdep.c (arm_symbian_skip_trampoline_code):
2966 * arm-tdep.c (arm_stub_unwind_sniffer): Likewise.
2967 * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
2968 * hppabsd-tdep.c (hppabsd_find_global_pointer): Likewise.
2969 * nios2-tdep.c (nios2_stub_frame_sniffer): Likewise.
2970 * nto-tdep.c (nto_relocate_section_addresses): Likewise.
2971 * s390-tdep.c (s390_stub_frame_sniffer): Likewise.
2972 * sh-tdep.c (sh_stub_unwind_sniffer): Likewise.
2973 * solib-dsbt.c (dsbt_in_dynsym_resolve_code): Likewise.
2974 * solib-frv.c (frv_in_dynsym_resolve_code): Likewise.
2975 * solib-svr4.c (svr4_in_dynsym_resolve_code): Likewise.
2976 * solib-target.c (solib_target_in_dynsym_resolve_code): Likewise.
2977 * sparc-tdep.c (sparc_analyze_prologue): Likewise.
2978 * tic6x-tdep.c (tic6x_stub_unwind_sniffer): Likewise.
2980 2013-06-24 Joel Brobecker <brobecker@adacore.com>
2982 * common/create-version.sh: Fix expansion of $host_alias
2983 and $target_alias in generation of HOST_NAME and TARGET_NAME
2986 2013-06-24 Tom Tromey <tromey@redhat.com>
2988 * common/create-version.sh: New file.
2989 * Makefile.in (version.c): Use bfd/version.h, common/version.in,
2991 (HFILES_NO_SRCDIR): Use common/version.h.
2992 * version.in: Move to ...
2993 * common/version.in: ... here. Replace date with "DATE".
2994 * version.h: Move to ...
2995 * common/version.h: ... here.
2997 2013-06-21 Joel Brobecker <brobecker@adacore.com>
2999 * gdb/gnulib/Makefile.in: Update date in copyright header.
3000 * gdb/gnulib/configure.ac: Ditto.
3001 * gdb/gnulib/update-gnulib.sh: Ditto.
3003 2013-06-21 Joel Brobecker <brobecker@adacore.com>
3005 * copyright.py (EXCLUDE_LIST): Replace "gdb/gnulib" by
3006 "gdb/gnulib/import".
3008 2013-06-21 Will Newton <will.newton@linaro.org>
3010 * doublest.c (ldfrexp): Remove function.
3011 (convert_doublest_to_floatformat): Call frexpl instead of
3014 2013-06-21 Will Newton <will.newton@linaro.org>
3016 * gnulib/update-gnulib.sh(IMPORTED_GNULIB_MODULES): Add frexpl.
3017 * gnulib/aclocal.m4: Regenerate.
3018 * gnulib/config.in: Regenerate.
3019 * gnulib/configure: Regenerate.
3020 * gnulib/import/Makefile.am: Update.
3021 * gnulib/import/Makefile.in: Update.
3022 * gnulib/import/m4/gnulib-cache.m4: Update.
3023 * gnulib/import/m4/gnulib-comp.m4: Update.
3024 * gnulib/import/float+.h: Import.
3025 * gnulib/import/float.c: Import.
3026 * gnulib/import/float.in.h: Import.
3027 * gnulib/import/fpucw.h: Import.
3028 * gnulib/import/frexp.c: Import.
3029 * gnulib/import/frexpl.c: Import.
3030 * gnulib/import/isnan.c: Import.
3031 * gnulib/import/isnand-nolibm.h: Import.
3032 * gnulib/import/isnand.c: Import.
3033 * gnulib/import/isnanl-nolibm.h: Import.
3034 * gnulib/import/isnanl.c: Import.
3035 * gnulib/import/itold.c: Import.
3036 * gnulib/import/m4/exponentd.m4: Import.
3037 * gnulib/import/m4/exponentl.m4: Import.
3038 * gnulib/import/m4/float_h.m4: Import.
3039 * gnulib/import/m4/fpieee.m4: Import.
3040 * gnulib/import/m4/frexp.m4: Import.
3041 * gnulib/import/m4/frexpl.m4: Import.
3042 * gnulib/import/m4/isnand.m4: Import.
3043 * gnulib/import/m4/isnanl.m4: Import.
3044 * gnulib/import/m4/math_h.m4: Import.
3045 * gnulib/import/math.c: Import.
3046 * gnulib/import/math.in.h: Import.
3048 2013-06-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3050 * common/linux-btrace.c (cpu_supports_btrace): Remove variable vendor,
3051 replace strcmp with signature_INTEL_ebx, signature_INTEL_ecx and
3052 signature_INTEL_edx comparisons.
3054 2013-06-20 Doug Evans <dje@google.com>
3057 * dwarf2read.c (try_open_dwop_file): New arg search_cwd.
3058 All callers updated.
3059 (open_dwp_file): If we can't find the dwp file, search the basename
3060 in debug-file-directory.
3062 * dwarf2read.c (struct dwp_file): Fix comment.
3063 (open_and_init_dwp_file): Set dwp_file->name to bfd's file name.
3065 * source.c (openp): Document OPF_TRY_CWD_FIRST+OPF_SEARCH_IN_PATH
3068 2013-06-20 Yao Qi <yao@codesourcery.com>
3070 * breakpoint.c (create_breakpoint): Fix code indentation.
3072 2013-06-20 Yao Qi <yao@codesourcery.com>
3074 * breakpoint.c (create_breakpoints_sal_default): Remove
3075 parameter 'lsal'. Update declaration.
3076 (bkpt_create_breakpoints_sal): Caller update.
3077 (tracepoint_create_breakpoints_sal): Likewise.
3079 2013-06-20 Pedro Alves <pedro@codesourcery.com>
3080 Yao Qi <yao@codesourcery.com>
3082 * NEWS: Mention the new option '--skip-unavailable' of command
3083 -data-list-register-values.
3084 * mi/mi-main.c (mi_cmd_data_list_register_values): Accept the
3085 --skip-unavailable option. Adjust to use output_register.
3086 (output_register): Add new 'skip_unavailable' parameter.
3089 2013-06-19 Mike Frysinger <vapier@gentoo.org>
3091 * Makefile.in (HFILES_NO_SRCDIR): Add common/i386-cpuid.h and
3092 common/i386-gcc-cpuid.h.
3093 * common/i386-cpuid.h: New wrapper header around i386-gcc-cpuid.h.
3094 * common/i386-gcc-cpuid.h: Rename from testsuite/gdb.arch/i386-cpuid.h.
3095 Copy the latest version from upstream gcc.
3096 * common/linux-btrace.c: Include i386-cpuid.h.
3097 (intel_supports_btrace): Delete x86 ifdefs and replace inline asm with
3099 (cpu_supports_btrace): Likewise.
3100 * go32-nat.c: Include i386-cpuid.h.
3101 (go32_sysinfo): Add (disabled) calls to i386_cpuid with comments.
3103 2013-06-19 Doug Evans <dje@google.com>
3105 * symfile.c (symfile_bfd_open): Delete unnecessary declaration.
3106 (get_section_index): Ditto.
3108 2013-06-19 Tom Tromey <tromey@redhat.com>
3110 * breakpoint.c (_initialize_breakpoint): Remove trailing \n from
3113 2013-06-18 Doug Evans <dje@google.com>
3115 * dwarf2read.c (dw2_symtab_iter_next): Check value of cu_index
3117 (dw2_expand_symtabs_matching): Fix symbol kind validity check.
3118 Move test of cu_index closer to use. Print complaint if cu_index
3121 2013-06-18 Joel Brobecker <brobecker@adacore.com>
3123 * machoread.c (oso_vector): Delete this global.
3124 (macho_register_oso): Add new parameter "oso_vector_ptr".
3125 Use it instead of the "oso_vector" global.
3126 (macho_symtab_read, macho_symfile_read_all_oso): Likewise.
3127 (macho_symfile_read): Use a local oso_vector, to be free'ed
3128 at the end of this function, in place of the old "oso_vector"
3129 global. Update various function calls accordingly. Use one
3130 single cleanup chain for the entire function.
3132 2013-06-18 Joel Brobecker <brobecker@adacore.com>
3134 * dwarf2read.c (dwarf2_per_objfile_free): Replace uses of
3135 DWARF2_PER_OBJFILE by uses of DATA instead.
3137 2013-06-18 Tom Tromey <tromey@redhat.com>
3139 * break-catch-sig.c (signal_catchpoint_explains_signal): Add 'sig'
3141 * breakpoint.c (bpstat_explains_signal): Add 'sig' argument.
3142 Special case signals other than GDB_SIGNAL_TRAP.
3143 (explains_signal_watchpoint): New function.
3144 (base_breakpoint_explains_signal): Add 'sig' argument.
3145 (initialize_breakpoint_ops): Set 'explains_signal' method for
3147 * breakpoint.h (struct breakpoint_ops) <explains_signal>: Add
3149 (bpstat_explains_signal): Likewise.
3150 * infrun.c (handle_syscall_event, handle_inferior_event): Update.
3152 2013-06-18 Tom Tromey <tromey@redhat.com>
3154 * python/py-inferior.c (gdbpy_selected_inferior): Don't incref.
3156 2013-06-18 Tom Tromey <tromey@redhat.com>
3158 * python/python.c (finish_python_initialization): Decref
3159 'pythondir' on failure path as well.
3161 2013-06-18 Tom Tromey <tromey@redhat.com>
3164 * dwarf2loc.c (read_pieced_value): Truncate this_size_bits
3165 after taking bits_to_skip into account. Sign extend byte_offset.
3166 * utils.h (gdb_sign_extend): Declare.
3167 * utils.c (gdb_sign_extend): New function.
3169 2013-06-18 Jan Kratochvil <jan.kratochvil@redhat.com>
3171 * dwarf2read.c (write_psymtabs_to_index): Ignore NULL PSYMTAB.
3173 2013-06-17 Pierre Muller <muller@sourceware.org>
3175 * corelow.c (core_open): Print GDB signal name instead of target
3178 2013-06-17 Mike Frysinger <vapier@gentoo.org>
3180 * .gitignore: Add /gcore.
3182 2013-06-13 Doug Evans <dje@google.com>
3184 * dwarf2read.c (try_open_dwop_file): Work around behaviour of
3185 OPF_TRY_CWD_FIRST to not search path if the file contains a '/'.
3187 2013-06-12 Phil Muldoon <pmuldoon@redhat.com>
3189 * stack.c (backtrace_command_1): Fix indentation.
3191 2013-06-11 Joel Brobecker <brobecker@adacore.com>
3193 * window-nat.c (thread_rec): Add missing empty line after
3194 local variable declaration.
3196 2013-06-11 Joel Brobecker <brobecker@adacore.com>
3198 * windows-nat.c (thread_rec): Revert format used to print
3199 error code returned by SuspendThread from %d back to %u.
3201 2013-06-11 Joel Brobecker <brobecker@adacore.com>
3203 * windows-nat.c (windows_continue): Add "0x" prefix for thread
3205 (get_windows_debug_event): Likewise, for all debug traces.
3207 2013-06-11 Joel Brobecker <brobecker@adacore.com>
3209 * window-nat.c (thread_rec): Add thread ID in SuspendThread
3212 2013-06-08 Pedro Alves <pedro@codesourcery.com>
3213 Yao Qi <yao@codesourcery.com>
3215 * mi/mi-main.c (get_register): Remove declaration.
3216 (output_register): Declare.
3217 (mi_cmd_data_list_register_values): Remove local variable
3218 'tuple_cleanup'. Move some code into output_register.
3219 (get_register): Renamed to ...
3220 (output_register): ... this. Output the register's
3221 "number" ui_out tuple here.
3223 2013-06-07 Pedro Alves <palves@redhat.com>
3225 * darwin-nat.c: Fix formating in copyright header.
3226 * darwin-nat.h: Likewise.
3227 * gnu-nat.c: Likewise.
3228 * machoread.c: Likewise.
3230 2013-06-07 Pedro Alves <palves@redhat.com>
3233 * regformats/regdat.sh: Output #include tdesc.h. Make globals
3234 static. Output a global target description pointer.
3235 (init_registers_${name}): Adjust to initialize a
3236 target description structure.
3238 2013-06-07 Will Newton <will.newton@linaro.org>
3240 * printcmd.c (build_address_symbolic): Call
3241 gdbarch_addr_bits_remove for text minimal symbols.
3243 2013-06-07 Will Newton <will.newton@linaro.org>
3245 * MAINTAINERS: Add myself to Write After Approval.
3247 2013-06-07 Yao Qi <yao@codesourcery.com>
3249 * tracepoint.c (start_tracing): Move code to ...
3250 (trace_reset_local_state): ... here. New.
3251 (disconnect_tracing): Don't call set_current_traceframe,
3252 set_tracepoint_num, and set_traceframe_context. Call
3253 trace_reset_local_state instead.
3254 (tfile_close): Call trace_reset_local_state.
3255 * ctf.c (ctf_close): Likewise.
3256 * remote.c (remote_close): Likewise.
3257 * tracepoint.h (trace_reset_local_state): Declare.
3259 2013-06-06 Doug Evans <dje@google.com>
3261 * dwarf2read.c: Whitespace fixes for DWP file format documentation,
3262 and fix header docs.
3264 2013-06-05 Doug Evans <dje@google.com>
3265 Keith Seitz <keiths@redhat.com>
3268 * cp-namespace.c (find_symbol_in_baseclass): Call
3269 cp_lookup_symbol_in_namespace instead of cp_lookup_symbol_namespace.
3270 Check result of call to lookup_symbol_static.
3271 Call lookup_static_symbol_aux unconditionally.
3272 Call check_typedef on base types before accessing them.
3273 (cp_lookup_nested_symbol): Fix comment.
3275 2013-06-05 Luis Machado <lgustavo@codesourcery.com>
3277 * gnu-v3-abi.c (gnuv3_skip_trampoline): Handle thunk
3278 minimal symbols pointing to function descriptors.
3280 2013-06-05 Tom Tromey <tromey@redhat.com>
3282 * python/py-utils.c (gdb_pymodule_addobject): Cast away const.
3284 2013-06-04 Sergio Durigan Junior <sergiodj@redhat.com>
3285 Pedro Alves <palves@redhat.com>
3287 * remote.c (remote_wait_as): Restore signal handler before returning
3288 when GDB gets a notification.
3290 2013-06-04 Gary Benson <gbenson@redhat.com>
3293 * breakpoint.h (handle_solib_event): Moved function declaration
3295 * breakpoint.c (handle_solib_event): Moved function to solib.c.
3296 (bpstat_stop_status): Pass new argument to handle_solib_event.
3297 * solib.h (update_solib_breakpoints): New function declaration.
3298 (handle_solib_event): Moved function declaration from
3300 * solib.c (update_solib_breakpoints): New function.
3301 (handle_solib_event): Moved function from breakpoint.c.
3302 Updated to call solib_ops->handle_event if not NULL.
3303 * solist.h (target_so_ops): New fields "update_breakpoints" and
3305 * infrun.c (set_stop_on_solib_events): New function.
3306 (_initialize_infrun): Use the above for "set
3307 stop-on-solib-events".
3308 (handle_inferior_event): Pass new argument to handle_solib_event.
3309 * solib-svr4.c (probe.h): New include.
3310 (svr4_free_library_list): New forward declaration.
3311 (probe_action): New enum.
3312 (probe_info): New struct.
3313 (probe_info): New static variable.
3314 (NUM_PROBES): New definition.
3315 (svr4_info): New fields "using_xfer", "probes_table" and
3317 (free_probes_table): New function.
3318 (free_solib_list): New function.
3319 (svr4_pspace_data_cleanup): Free probes table and solib list.
3320 (svr4_copy_library_list): New function.
3321 (svr4_current_sos_via_xfer_libraries): New parameter "annex".
3322 (svr4_read_so_list): New parameter "prev_lm".
3323 (svr4_current_sos_direct): Renamed from "svr4_current_sos".
3324 (svr4_current_sos): New function.
3325 (probe_and_action): New struct.
3326 (hash_probe_and_action): New function.
3327 (equal_probe_and_action): Likewise.
3328 (register_solib_event_probe): Likewise.
3329 (solib_event_probe_at): Likewise.
3330 (solib_event_probe_action): Likewise.
3331 (solist_update_full): Likewise.
3332 (solist_update_incremental): Likewise.
3333 (disable_probes_interface_cleanup): Likewise.
3334 (svr4_handle_solib_event): Likewise.
3335 (svr4_update_solib_event_breakpoint): Likewise.
3336 (svr4_update_solib_event_breakpoints): Likewise.
3337 (svr4_create_solib_event_breakpoints): Likewise.
3338 (enable_break): Free probes table before creating breakpoints.
3339 Use svr4_create_solib_event_breakpoints to create breakpoints.
3340 (svr4_solib_create_inferior_hook): Free the solib list.
3341 (_initialize_svr4_solib): Initialise
3342 svr4_so_ops.handle_solib_event and svr4_so_ops.update_breakpoints.
3344 2013-06-04 Gary Benson <gbenson@redhat.com>
3346 * target.h (target_ops): New field
3347 "to_augmented_libraries_svr4_read".
3348 (target_augmented_libraries_svr4_read): New macro.
3349 * target.c (update_current_target): Handle
3350 to_augmented_libraries_svr4_read.
3351 * remote.c (remote_state): New field
3352 "augmented_libraries_svr4_read".
3353 (remote_augmented_libraries_svr4_read_feature): New function.
3354 (remote_protocol_features): Add entry for
3355 "augmented-libraries-svr4-read".
3356 (remote_augmented_libraries_svr4_read): New function.
3357 (init_remote_ops): Initialize
3358 remote_ops.to_augmented_libraries_svr4_read.
3360 2013-06-04 Gary Benson <gbenson@redhat.com>
3364 2013-06-04 Gary Benson <gbenson@redhat.com>
3366 * objfiles.h (inhibit_section_map_updates): New function
3368 (resume_section_map_updates): Likewise.
3369 (resume_section_map_updates_cleanup): Likewise.
3370 * objfiles.c (objfile_pspace_info): Removed field
3371 "objfiles_changed_p". New fields "new_objfiles_available",
3372 "section_map_dirty" and "inhibit_updates".
3373 (allocate_objfile): Set new_objfiles_available.
3374 (free_objfile): Set section_map_dirty.
3375 (objfile_relocate1): Likewise.
3376 (in_plt_section): Likewise.
3377 (find_pc_section): Update the conditions under which the
3378 section map will be updated.
3379 (inhibit_section_map_updates): New function.
3380 (resume_section_map_updates): Likewise.
3381 (resume_section_map_updates_cleanup): Likewise.
3383 2013-06-04 Gary Benson <gbenson@redhat.com>
3385 * probe.h (get_probe_argument_count): New declaration.
3386 (evaluate_probe_argument): Likewise.
3387 * probe.c (get_probe_argument_count): New function.
3388 (evaluate_probe_argument): Likewise.
3389 (probe_safe_evaluate_at_pc): Use the above new functions.
3391 2013-06-04 Alan Modra <amodra@gmail.com>
3393 * ppc-tdep.h (ppc_insns_match_pattern): Update prototype.
3394 * rs6000-tdep.c (read_insn): Add frame param, don't assume big-endian.
3395 (ppc_insns_match_pattern): Add frame param. Avoid multiple
3396 target mem reads on optional insns.
3397 * ppc-linux-tdep.c (ppc_skip_trampoline_code): Update
3398 ppc_insns_match_pattern calls.
3399 * ppc64-tdep.c (ppc64_standard_linkage2, ppc64_standard_linkage3):
3400 Add match for power7 thread safety insns, and new order of
3401 std 2,40(1) insn. Correct code shown for _dl_runtime_resolve
3402 invocation in comment, and update rest of comment.
3403 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN,
3404 PPC64_STANDARD_LINKAGE3_LEN): Delete.
3405 (ppc64_standard_linkage2_target): Update insn offsets.
3406 (ppc64_skip_trampoline_code): Use a single insn buffer. Match newer
3407 stubs first. Update calls.
3409 2013-06-04 Yao Qi <yao@codesourcery.com>
3411 * solib.c (solib_find): Don't need dir separator if path has
3414 2013-06-03 Joel Brobecker <brobecker@adacore.com>
3416 Revert (indirectly causes a SIGSEGV):
3417 * machoread.c (macho_symfile_read): Assign first cleanup to
3420 2013-06-03 Yao Qi <yao@codesourcery.com>
3422 * mi/mi-cmd-var.c (mi_no_values, mi_simple_values): Move to
3423 mi-parse.c. Make them static.
3424 (mi_all_values): Likewise.
3425 (mi_parse_values_option): Move to mi-parse.c. Rename it to
3426 mi_parse_print_values. Make it external.
3427 * mi/mi-cmds.h (mi_no_values, mi_simple_values, mi_all_values):
3428 Remove the declarations.
3429 * mi/mi-parse.c (mi_parse_print_values): Moved from mi-cmd-var.c.
3430 * mi/mi-parse.h (mi_parse_print_values): Declare.
3431 * mi/mi-cmd-stack.c: Include mi-parse.h.
3432 (parse_print_values): Remove
3433 (mi_cmd_stack_list_locals): Call mi_parse_print_values instead
3434 of parse_print_values.
3435 (mi_cmd_stack_list_args, mi_cmd_stack_list_variables): Likewise.
3437 2013-05-31 Pedro Alves <pedro@codesourcery.com>
3438 Yao Qi <yao@codesourcery.com>
3440 * tracepoint.c (all_tracepoint_actions_and_cleanup): Declare.
3441 (encode_actions): Move code to ...
3442 (all_tracepoint_actions_and_cleanup): ... here. New.
3443 (trace_dump_command): Likewise.
3445 2013-05-30 Tom Tromey <tromey@redhat.com>
3447 * symmisc.c (maintenance_expand_symtabs): Call do_cleanups.
3449 2013-05-30 Tom Tromey <tromey@redhat.com>
3451 * xml-support.c (gdb_xml_create_parser_and_cleanup): Rename from
3452 gdb_xml_create_parser_and_cleanup_1. Return a cleanup. Remove
3453 'old_chain' argument. Add 'parser_result' argument.
3454 (gdb_xml_create_parser_and_cleanup): Remove old version.
3455 (gdb_xml_parse_quick): Update.
3456 (xml_process_xincludes): Update.
3457 * xml-support.h (gdb_xml_create_parser_and_cleanup): Don't
3460 2013-05-30 Tom Tromey <tromey@redhat.com>
3462 * probe.c (collect_probes): Check arguments for NULL before
3463 calling compile_rx_or_error.
3464 * utils.c (compile_rx_or_error): Require 'rx' to be non-NULL.
3467 2013-05-30 Tom Tromey <tromey@redhat.com>
3469 * infrun.c (adjust_pc_after_break): Introduce an outer null
3472 2013-05-30 Tom Tromey <tromey@redhat.com>
3474 * mi/mi-cmd-var.c (varobj_update_one): Add an outer null cleanup.
3476 2013-05-30 Tom Tromey <tromey@redhat.com>
3478 * cli/cli-script.c (read_command_lines_1): Use a null cleanup
3479 for 'old_chain'. Do not check 'head' before processing
3482 2013-05-30 Tom Tromey <tromey@redhat.com>
3484 * mi/mi-cmd-stack.c (list_arg_or_local): Remove
3487 2013-05-30 Tom Tromey <tromey@redhat.com>
3489 * dbxread.c (dbx_read_symtab): Declare 'back_to' in a more
3490 inner scope. Unconditionally call do_cleanups.
3492 2013-05-30 Tom Tromey <tromey@redhat.com>
3494 * source.c (find_and_open_source): Call do_cleanups.
3496 2013-05-30 Tom Tromey <tromey@redhat.com>
3498 * linux-thread-db.c (thread_db_load_search): Unconditionally
3501 2013-05-30 Tom Tromey <tromey@redhat.com>
3503 * solib-aix.c (solib_aix_bfd_open): Don't use a null cleanup
3504 for 'cleanup'; instead use a later one.
3506 2013-05-30 Tom Tromey <tromey@redhat.com>
3508 * python/py-breakpoint.c (bppy_get_commands): Use
3509 explicit, unconditional return.
3510 * python/py-frame.c (frapy_read_var): Likewise.
3511 * python/python.c (gdbpy_decode_line): Likewise.
3513 2013-05-30 Tom Tromey <tromey@redhat.com>
3515 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Call
3516 do_cleanups on all return paths.
3518 2013-05-30 Tom Tromey <tromey@redhat.com>
3520 * top.c (execute_command): Discard 'cleanup_if_error' cleanups.
3522 2013-05-30 Tom Tromey <tromey@redhat.com>
3524 * stabsread.c (read_struct_type): Call do_cleanups along
3527 2013-05-30 Maciej W. Rozycki <macro@codesourcery.com>
3529 * mips-linux-tdep.c: Adjust formatting throughout.
3531 2013-05-30 Tom Tromey <tromey@redhat.com>
3533 * mipsread.c (read_alphacoff_dynamic_symtab): Call do_cleanups
3534 along all return paths.
3536 2013-05-30 Tom Tromey <tromey@redhat.com>
3538 * symfile.c (find_separate_debug_file): Call do_cleanups
3539 along all return paths.
3541 2013-05-30 Tom Tromey <tromey@redhat.com>
3543 * symtab.c (search_symbols): Introduce a null cleanup for
3546 2013-05-30 Tom Tromey <tromey@redhat.com>
3548 * python/py-value.c (valpy_binop): Call do_cleanups before
3551 2013-05-30 Tom Tromey <tromey@redhat.com>
3553 * python/py-prettyprint.c (print_children): Remove extra
3556 2013-05-30 Tom Tromey <tromey@redhat.com>
3558 * python/py-frame.c (frapy_read_var): Call do_cleanups along
3561 2013-05-30 Tom Tromey <tromey@redhat.com>
3563 * python/py-breakpoint.c (bppy_get_commands): Call do_cleanups
3564 along all return paths.
3566 2013-05-30 Tom Tromey <tromey@redhat.com>
3568 * cli/cli-logging.c (set_logging_redirect): Unconditionally
3571 2013-05-30 Tom Tromey <tromey@redhat.com>
3573 * varobj.c (c_value_of_root): Call do_cleanups along all
3576 2013-05-30 Tom Tromey <tromey@redhat.com>
3578 * tracepoint.c (trace_dump_command): Unconditionally call
3581 2013-05-30 Tom Tromey <tromey@redhat.com>
3583 * breakpoint.c (output_thread_groups, parse_cmd_to_aexpr): Call
3584 do_cleanups earlier.
3586 2013-05-30 Tom Tromey <tromey@redhat.com>
3588 * machoread.c (macho_symfile_read): Assign first cleanup to
3591 2013-05-30 Tom Tromey <tromey@redhat.com>
3593 * m32r-rom.c (m32r_load): Call do_cleanups at all returns.
3595 2013-05-30 Tom Tromey <tromey@redhat.com>
3597 * mi/mi-main.c (list_available_thread_groups): Call do_cleanups.
3599 2013-05-30 Tom Tromey <tromey@redhat.com>
3601 * inf-ptrace.c (inf_ptrace_create_inferior): Unconditionally
3602 call discard_cleanups.
3603 (inf_ptrace_attach): Likewise.
3605 2013-05-30 Tom Tromey <tromey@redhat.com>
3607 * remote-mips.c (mips_exit_debug): Call do_cleanups on all
3609 (mips_initialize): Likewise.
3610 (common_open): Call do_cleanups.
3612 2013-05-30 Tom Tromey <tromey@redhat.com>
3614 * utils.c (internal_vproblem): Call do_cleanups.
3616 2013-05-30 Tom Tromey <tromey@redhat.com>
3618 * linespec.c (find_linespec_symbols): Don't reassign to 'cleanup'.
3620 2013-05-30 Tom Tromey <tromey@redhat.com>
3622 * cli/cli-script.c (setup_user_args): Don't return after error.
3624 2013-05-30 Tom Tromey <tromey@redhat.com>
3626 * somread.c (som_symtab_read): Call do_cleanups.
3628 2013-05-30 Tom Tromey <tromey@redhat.com>
3630 * printcmd.c (print_command_1): Unconditionally call do_cleanups.
3632 2013-05-30 Tom Tromey <tromey@redhat.com>
3634 * cli/cli-cmds.c (cd_command, alias_command): Call do_cleanups.
3635 * cli/cli-dump.c (restore_binary_file): Call do_cleanups.
3636 * interps.c (interpreter_exec_cmd): Call do_cleanups.
3637 * source.c (show_substitute_path_command): Call do_cleanups.
3638 (unset_substitute_path_command, set_substitute_path_command):
3640 * symfile.c (load_command): Call do_cleanups.
3642 2013-05-30 Tom Tromey <tromey@redhat.com>
3644 * contrib/cleanup_check.py: New file.
3645 * contrib/gcc-with-excheck: Add option parsing.
3647 2013-05-30 Joel Brobecker <brobecker@adacore.com>
3649 * windows-nat.c (windows_delete_thread): Add missing space
3652 2013-05-30 Hafiz Abid Qadeer <abidh@codesourcery.com>
3654 * inferior.c (top level): Include tilde.h.
3655 (add_inferior_command): Call tilde_expand on the value of 'exec'
3658 2013-05-30 Pedro Alves <pedro@codesourcery.com>
3659 Yao Qi <yao@codesourcery.com>
3661 * tracepoint.c (encode_actions_1): Remove parameter 't'.
3663 (encode_actions): Likewise.
3664 * remote.c (remote_download_tracepoint): Caller update.
3665 * tracepoint.h (encode_actions): Update declaration.
3667 2013-05-30 Pedro Alves <palves@redhat.com>
3669 * python/python-internal.h (gdb_Py_DECREF): Cast OP to PyObject
3672 2013-05-30 Yao Qi <yao@codesourcery.com>
3674 * remote.c (remote_check_symbols): Remove unused parameter
3677 (remote_start_remote, remote_new_objfile): Caller update.
3679 2013-05-30 Yao Qi <yao@codesourcery.com>
3681 * mi/mi-cmds.c (mi_cmds): Define MI command
3682 '-exec-arguments' by macro DEF_MI_CMD_CLI_1 instead of
3685 2013-05-29 Pedro Alves <palves@redhat.com>
3687 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint)
3688 (remote_insert_watchpoint, remote_remove_watchpoint)
3689 (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
3690 (remote_verify_memory, compare_sections_command)
3691 (remote_search_memory): Set the general process/thread on the
3694 2013-05-29 Pedro Alves <palves@redhat.com>
3696 * aarch64-tdep.c: Don't include "features/aarch64-without-fpu.c".
3697 (_initialize_aarch64_tdep): Don't call
3698 initialize_tdesc_aarch64_without_fpu.
3699 * features/Makefile (WHICH): Remove reference to
3700 aarch64-without-fpu.
3701 * features/aarch64-without-fpu.c: Delete file.
3702 * regformats/aarch64-without-fpu.dat: Delete file.
3704 2013-05-28 Yao Qi <yao@codesourcery.com>
3706 * tracepoint.c (stringify_collection_list): Remove parameter
3708 (encode_actions): Caller update. Remove local variables.
3710 2013-05-24 Yao Qi <yao@codesourcery.com>
3712 * tracepoint.c (TFILE_PID): Remove.
3713 (tfile_open): Don't add thread and inferior.
3714 (tfile_close): Don't set 'inferior_ptid'. Don't call
3715 exit_inferior_silent.
3716 (tfile_thread_alive): Remove.
3717 (init_tfile_ops): Don't set field 'to_thread_alive' of
3720 2013-05-23 Doug Evans <dje@google.com>
3722 * contrib/cc-with-tweaks.sh (-p): Handle no dwo files.
3724 2013-05-23 Pedro Alves <palves@redhat.com>
3726 * common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
3727 [HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
3728 (socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
3729 Only define if HAVE_SOCKETS is defined.
3730 * configure.ac: Check for sys/socket.h.
3731 * config.in, configure: Regenerate.
3733 2013-05-23 Pedro Alves <palves@redhat.com>
3735 * dwarf2read.c (create_dwp_hash_table, create_dwo_in_dwp)
3736 (open_and_init_dwp_file): Use %s/pulongest instead of %u for
3737 printing uint32_t variables.
3739 2013-05-23 Pedro Alves <palves@redhat.com>
3741 * NEWS: Mention GDBserver range stepping support.
3743 2013-05-23 Yao Qi <yao@codesourcery.com>
3744 Pedro Alves <palves@redhat.com>
3746 * gdbthread.h (struct thread_control_state) <may_range_step>: New
3748 * infcmd.c (step_once, until_next_command): Enable range stepping.
3749 * infrun.c (displaced_step_prepare): Disable range stepping.
3750 (resume): Disable range stepping if stepping over a breakpoint or
3751 we have software watchpoints. If range stepping is enabled,
3752 assert the thread is in the stepping range.
3753 (clear_proceed_status_thread): Clear may_range_step.
3754 (handle_inferior_event): Disable range stepping as soon as we know
3755 the thread that hit the event. Re-enable it whenever we're going
3756 to step with a step range.
3757 * remote.c (struct vCont_action_support) <r>: New field.
3758 (use_range_stepping): New global.
3759 (remote_vcont_probe): Handle 'r' action.
3760 (append_resumption): Append an 'r' action if the thread may range
3762 (show_range_stepping): New function.
3763 (set_range_stepping): New function.
3764 (_initialize_remote): Call add_setshow_boolean_cmd to register the
3765 'set range-stepping' and 'show range-stepping' commands.
3766 * NEWS: Mention range stepping, the new vCont;r action, and the
3767 new "set/show range-stepping" commands.
3769 2013-05-23 Yao Qi <yao@codesourcery.com>
3770 Pedro Alves <palves@redhat.com>
3772 * remote.c (struct vCont_action_support): New struct.
3773 (struct remote_state) <support_vCont_t>: Remove field.
3774 <vCont_actions_support>: New field.
3775 (remote_vcont_probe, remote_stop_ns): Update.
3777 2013-05-23 Yao Qi <yao@codesourcery.com>
3778 Pedro Alves <palves@redhat.com>
3780 * gdbthread.h (pc_in_thread_step_range): New declaration.
3781 * thread.c (pc_in_thread_step_range): New function.
3782 * infrun.c (handle_inferior_event): Use it.
3784 2013-05-23 Joel Brobecker <brobecker@adacore.com>
3786 * mi/mi-cmd-break.c (mi_argv_to_format): Use xsnprintf instead
3789 2013-05-22 Keith Seitz <keiths@redhat.com>
3791 * ada-lang.c (is_known_support_routine): Add explicit free of
3792 'func_name' from find_frame_funname.
3793 (ada_unhandled_exception_name_addr_from_raise): Add cleanups
3794 for func_name from find_frame_funname.
3795 * python/py-frame.c (frapy_name): Add explicit free of
3796 'name' from find_frame_funname.
3797 * stack.c (find_frame_funname): Add comment explaining that
3798 funcp must be freed by the caller.
3799 Return copy of symbol names instead of pointers.
3800 (print_frame): Add a cleanup for 'funname' from
3802 * stack.h (find_frame_funname): Remove "const" from
3803 'funname' parameter.
3805 2013-05-22 Tom Tromey <tromey@redhat.com>
3808 * c-valprint.c (c_value_print): Use value_addr for
3809 references. Convert back to reference type with value_ref.
3811 2013-05-22 Eli Zaretskii <eliz@gnu.org>
3813 * windows-nat.c (handle_unload_dll): Don't call solib_add for the
3814 unloaded DLL, it will be done by handle_solib_event. See
3815 http://sourceware.org/ml/gdb-patches/2013-05/msg00713.html for the
3818 2013-05-22 Phil Muldoon <pmuldoon@redhat.com>
3820 * ui-out.c: Create typedef ui_out_level_p and define vector
3821 operations for that type.
3822 (struct ui_out): Use a vector instead of an array.
3823 (current_level): Return level from a vector.
3824 (push_level): Create a level in a vector.
3825 (pop_level): Delete a level in a vector.
3826 (ui_out_new): Create initial level zero level, and store in a
3828 (ui_out_destroy): Add vector cleanup.
3830 2013-05-22 Pedro Alves <palves@redhat.com>
3832 * python/python-internal.h (gdb_Py_DECREF): Tag with
3833 "ARI: editCase function".
3835 2013-05-21 Paul Pluzhnikov <ppluzhnikov@google.com>
3837 * solib-svr4.c (svr4_free_so): Protect against NULL dereference.
3839 2013-05-21 Pedro Alves <palves@redhat.com>
3841 * python/py-prettyprint.c (apply_val_pretty_printer): Check
3842 whether PRINTER is NULL before installing a Py_DECREF cleanup.
3843 * python/py-utils.c (py_decref): Don't check for NULL before
3846 2013-05-21 Pedro Alves <palves@redhat.com>
3848 * python/py-utils.c (py_decref): Remove extra braces.
3849 (gdb_pymodule_addobject): Remove extra braces.
3850 * python-internal.h (gdb_Py_DECREF): New static inline function.
3851 (Py_DECREF): Redefine as calling gdb_Py_DECREF.
3853 2013-05-21 Philippe Waroquiers <philippe.waroquiers@skynet.be>
3855 * breakpoints.c (detach_breakpoints): Do not
3856 detach breakpoints locations with loc_type bp_loc_other.
3858 2013-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3860 Workaround Python 2.6.
3861 * python/py-utils.c (gdb_pymodule_addobject): Wrap Py_DECREF into
3864 2013-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3866 Code cleanup: constification.
3867 * solib.c (solib_ops): Make return type and ops variable type const.
3868 (set_solib_ops): Make the new_ops parameter and ops variable const.
3869 (solib_find, solib_map_sections, clear_so, free_so, update_solib_list)
3870 (solib_add, solib_keep_data_in_core, clear_solib)
3871 (solib_create_inferior_hook, in_solib_dynsym_resolve_code)
3872 (reload_shared_libraries, solib_global_lookup): Make the ops variable
3874 * solib.h (set_solib_ops): Make the new_ops parameter const.
3876 2013-05-21 Joel Brobecker <brobecker@adacore.com>
3878 * data-directory/Makefile.in (SYSTEM_GDBINIT_SRCDIR): New
3880 (VPATH): Add SYSTEM_GDBINIT_SRCDIR.
3881 (SYSTEM_GDBINIT_DIR, SYSTEM_GDBINIT_INSTALL_DIR)
3882 (SYSTEM_GDBINIT_FILES): New variables.
3883 (all): Add stamp-system-gdbinit.
3884 (stamp-system-gdbinit): New rule.
3885 (clean-system-gdbinit, install-system-gdbinit)
3886 (uninstall-system-gdbinit): New rules. Make them .PHONY.
3887 (install-only): Add dependency on install-system-gdbinit.
3888 (uninstall): Add dependency on uninstall-system-gdbinit.
3889 (clean): Add dependency on clean-system-gdbinit.
3890 * system-gdbinit/elinos.py: New file.
3891 * system-gdbinit/wrs-linux.py: New file.
3893 2013-05-21 Joel Brobecker <brobecker@adacore.com>
3895 * ada-lang.c (old_renaming_is_invisible): Fix cleanup leak.
3897 2013-05-21 Hui Zhu <hui@codesourcery.com>
3899 * breakpoint.c (dprintf_breakpoint_ops): Remove its static.
3900 * breakpoint.h (dprintf_breakpoint_ops): Add extern.
3901 * mi/mi-cmd-break.c (ctype.h): New include.
3902 (gdb_obstack.h): New include.
3903 (mi_argv_to_format, mi_cmd_break_insert_1): New.
3904 (mi_cmd_break_insert): Call mi_cmd_break_insert_1.
3905 (mi_cmd_dprintf_insert): New.
3906 * mi/mi-cmds.c (mi_cmds): Add "dprintf-insert".
3907 * mi/mi-cmds.h (mi_cmd_dprintf_insert): New extern.
3909 2013-05-20 Tom Tromey <tromey@redhat.com>
3911 * python/py-prettyprint.c (search_pp_list): Decref 'attr'.
3913 2013-05-20 Tom Tromey <tromey@redhat.com>
3915 * python/py-value.c (valpy_get_dynamic_type): Simplify
3916 dynamic_type assignment. Use Py_XINCREF.
3918 2013-05-20 Tom Tromey <tromey@redhat.com>
3920 * python/py-type.c (typy_fields): Unconditionally decref 'r'.
3922 2013-05-20 Tom Tromey <tromey@redhat.com>
3924 * python/py-frame.c (frapy_older, frapy_newer, gdbpy_newest_frame)
3925 (gdbpy_selected_frame): Move object-construction code
3928 2013-05-20 Tom Tromey <tromey@redhat.com>
3930 * python/py-arch.c (gdbpy_initialize_arch): Use
3931 gdb_pymodule_addobject.
3932 * python/py-block.c (gdbpy_initialize_blocks): Use
3933 gdb_pymodule_addobject.
3934 * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Use
3935 gdb_pymodule_addobject.
3936 * python/py-cmd.c (gdbpy_initialize_breakpoints): Use
3937 gdb_pymodule_addobject.
3938 * python/py-event.c (gdbpy_initialize_event_generic): Use
3939 gdb_pymodule_addobject.
3940 * python/py-evtregistry.c (gdbpy_initialize_eventregistry): Use
3941 gdb_pymodule_addobject.
3942 * python/py-evts.c (add_new_registry): Use
3943 gdb_pymodule_addobject.
3944 (gdbpy_initialize_py_events): Likewise.
3945 * python/py-finishbreakpoint.c
3946 (gdbpy_initialize_finishbreakpoints): Use
3947 gdb_pymodule_addobject.
3948 * python/py-frame.c (gdbpy_initialize_frames): Use
3949 gdb_pymodule_addobject.
3950 * python/py-function.c (gdbpy_initialize_functions): Use
3951 gdb_pymodule_addobject.
3952 * python/py-inferior.c (gdbpy_initialize_inferior): Use
3953 gdb_pymodule_addobject.
3954 * python/py-infthread.c (gdbpy_initialize_thread): Use
3955 gdb_pymodule_addobject.
3956 * python/py-objfile.c (gdbpy_initialize_objfile): Use
3957 gdb_pymodule_addobject.
3958 * python/py-param.c (gdbpy_initialize_parameters): Use
3959 gdb_pymodule_addobject.
3960 * python/py-progspace.c (gdbpy_initialize_pspace): Use
3961 gdb_pymodule_addobject.
3962 * python/py-symbol.c (gdbpy_initialize_symbols): Use
3963 gdb_pymodule_addobject.
3964 * python/py-symtab.c (gdbpy_initialize_symtabs): Use
3965 gdb_pymodule_addobject.
3966 * python/py-type.c (gdbpy_initialize_types): Use
3967 gdb_pymodule_addobject.
3968 * python/py-utils.c (gdb_pymodule_addobject): New function.
3969 * python/py-value.c (gdbpy_initialize_values): Use
3970 gdb_pymodule_addobject.
3971 * python/python-internal.h (gdb_pymodule_addobject): Declare.
3972 * python/python.c (_initialize_python): Use
3973 gdb_pymodule_addobject.
3975 2013-05-20 Tom Tromey <tromey@redhat.com>
3977 * python/py-cmd.c (cmdpy_completer): Use explicit decref.
3978 * python/py-param.c (get_set_value, get_show_value): Use
3980 * python/python.c (start_type_printers, apply_type_printers):
3981 Use explicit decrefs.
3983 2013-05-20 Tom Tromey <tromey@redhat.com>
3985 * python/py-evts.c (gdbpy_initialize_py_events): Don't
3988 2013-05-20 Tom Tromey <tromey@redhat.com>
3990 * python/python.c (gdbpy_run_events): Decref the result
3991 of PyObject_CallObject.
3993 2013-05-20 Tom Tromey <tromey@redhat.com>
3995 * python/py-symtab.c (set_sal): Use
3996 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION. Return -1 on error.
3997 (symtab_and_line_to_sal_object): Update.
3999 2013-05-20 Tom Tromey <tromey@redhat.com>
4001 * python/py-param.c (compute_enum_values): Decref 'item'.
4003 2013-05-20 Tom Tromey <tromey@redhat.com>
4005 * mi/mi-main.c: Include python-internal.h.
4006 (mi_cmd_list_features): Check gdb_python_initialized.
4007 * python/py-inferior.c (python_on_normal_stop, python_on_resume)
4008 (python_inferior_exit, python_new_objfile, add_thread_object)
4009 (delete_thread_object, py_free_inferior): Check
4010 gdb_python_initialized.
4011 * python/py-prettyprint.c (apply_val_pretty_printer): Check
4012 gdb_python_initialized.
4013 * python/py-type.c (save_objfile_types): Check
4014 gdb_python_initialized.
4015 * python/python-internal.h (gdb_python_initialized): Declare.
4016 * python/python.c (ensure_python_env): Throw exception if
4017 Python not initialized.
4018 (before_prompt_hook, source_python_script_for_objfile)
4019 (start_type_printers, apply_type_printers,
4020 free_type_printers): Check gdb_python_initialized.
4021 * varobj.c (varobj_get_display_hint)
4022 (dynamic_varobj_has_child_method, update_dynamic_varobj_children)
4023 (install_new_value_visualizer, varobj_set_visualizer)
4024 (value_get_print_value): Check gdb_python_initialized.
4026 2013-05-20 Tom Tromey <tromey@redhat.com>
4028 * python/py-arch.c (gdbpy_initialize_arch): Return 'int'.
4030 * python/py-auto-load.c (gdbpy_initialize_auto_load): Return 'int'.
4031 * python/py-block.c (gdbpy_initialize_blocks): Return 'int'.
4033 * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Return 'int'.
4035 * python/py-cmd.c (gdbpy_initialize_commands): Return 'int'.
4037 * python/py-event.c (gdbpy_initialize_event): Return 'int'.
4039 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Change generated
4040 init function to return 'int'.
4041 * python/py-evtregistry.c (gdbpy_initialize_eventregistry):
4042 Return 'int'. Check errors.
4043 * python/py-evts.c (gdbpy_initialize_py_events): Return 'int'.
4045 * python/py-finishbreakpoint.c (gdbpy_initialize_finishbreakpoints):
4046 Return 'int'. Check errors.
4047 * python/py-frame.c (gdbpy_initialize_frames): Return 'int'.
4049 * python/py-function.c (gdbpy_initialize_functions): Return 'int'.
4051 * python/py-gdb-readline.c (gdbpy_initialize_gdb_readline):
4053 * python/py-inferior.c (gdbpy_initialize_inferior): Return 'int'.
4055 * python/py-infthread.c (gdbpy_initialize_thread): Return 'int'.
4057 * python/py-lazy-string.c (gdbpy_initialize_lazy_string): Return 'int'.
4059 * python/py-objfile.c (gdbpy_initialize_objfile): Return 'int'.
4061 * python/py-param.c (gdbpy_initialize_parameters): Return 'int'.
4063 * python/py-progspace.c (gdbpy_initialize_pspace): Return 'int'.
4065 * python/py-symbol.c (gdbpy_initialize_symbols): Return 'int'.
4067 * python/py-symtab.c (gdbpy_initialize_symtabs): Return 'int'.
4069 * python/py-type.c (gdbpy_initialize_types): Return 'int'.
4071 * python/py-value.c (gdbpy_initialize_values): Return 'int'.
4073 * python/python-internal.h (gdbpy_initialize_auto_load,
4074 gdbpy_initialize_values, gdbpy_initialize_frames,
4075 gdbpy_initialize_symtabs, gdbpy_initialize_commands,
4076 gdbpy_initialize_symbols, gdbpy_initialize_symtabs,
4077 gdbpy_initialize_blocks, gdbpy_initialize_types,
4078 gdbpy_initialize_functions, gdbpy_initialize_pspace,
4079 gdbpy_initialize_objfile, gdbpy_initialize_breakpoints,
4080 gdbpy_initialize_finishbreakpoints,
4081 gdbpy_initialize_lazy_string, gdbpy_initialize_parameters,
4082 gdbpy_initialize_thread, gdbpy_initialize_inferior,
4083 gdbpy_initialize_eventregistry, gdbpy_initialize_event,
4084 gdbpy_initialize_py_events, gdbpy_initialize_stop_event,
4085 gdbpy_initialize_signal_event,
4086 gdbpy_initialize_breakpoint_event,
4087 gdbpy_initialize_continue_event,
4088 gdbpy_initialize_exited_event, gdbpy_initialize_thread_event,
4089 gdbpy_initialize_new_objfile_event, gdbpy_initialize_arch):
4090 Update. Use CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
4091 * python/python.c (gdb_python_initialized): New global.
4092 (gdbpy_initialize_events): Return 'int'. Check errors.
4093 (_initialize_python): Check errors. Set
4094 gdb_python_initialized.
4096 2013-05-20 Tom Tromey <tromey@redhat.com>
4098 * python/py-finishbreakpoint.c (bpfinishpy_out_of_scope):
4099 Decref the reslut of PyObject_CallMethod.
4101 2013-05-20 Tom Tromey <tromey@redhat.com>
4103 * python/py-event.c (gdbpy_initialize_event_generic): Return
4104 early if PyType_Ready fails.
4106 2013-05-20 Tom Tromey <tromey@redhat.com>
4108 * python/py-type.c (make_fielditem): Add gdb_assert_not_reached
4109 as 'default' in the switch.
4111 2013-05-20 Tom Tromey <tromey@redhat.com>
4113 * python/py-inferior.c (gdbpy_inferiors): Update. Hoist
4114 get_addr_from_python calls out of TRY_CATCH.
4115 (infpy_write_memory, infpy_search_memory): Likewise.
4116 * python/py-utils.c (get_addr_from_python): Return negative
4117 value on error. Use TRY_CATCH.
4118 * python/python-internal.h (get_addr_from_python): Use
4119 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
4121 2013-05-20 Tom Tromey <tromey@redhat.com>
4123 * python/py-event.c (evpy_emit_event): Decref the
4124 result of PyObject_CallFunctionObjArgs.
4126 2013-05-20 Tom Tromey <tromey@redhat.com>
4128 * python/py-cmd.c (cmdpy_completer): Use iterator protocol.
4131 2013-05-20 Tom Tromey <tromey@redhat.com>
4133 * python/py-cmd.c (cmdpy_init): Decref 'ds_obj'.
4135 2013-05-20 Tom Tromey <tromey@redhat.com>
4137 * python/py-event.h (gdbpy_initialize_event_generic): Use
4138 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
4139 * python/py-evts.c (add_new_registry): Use
4140 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
4141 * python/python-internal.h
4142 (CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION): New macro.
4144 2013-05-20 Tom Tromey <tromey@redhat.com>
4146 * python/py-arch.c (archpy_disassemble): Update.
4147 * python/py-type.c (typy_get_composite, typy_lookup_typename)
4148 (typy_lookup_type): Use GDB_PY_HANDLE_EXCEPTION.
4149 * python/py-utils.c (gdbpy_convert_exception): Return 'void'.
4150 * python/python-internal.h (CPYCHECKER_SETS_EXCEPTION): New
4152 (GDB_PY_HANDLE_EXCEPTION): Update.
4153 (gdbpy_convert_exception): Update. Use CPYCHECKER_SETS_EXCEPTION.
4155 2013-05-20 Tom Tromey <tromey@redhat.com>
4157 * python/python-internal.h (events_object_type): Remove.
4159 2013-05-20 Tom Tromey <tromey@redhat.com>
4161 * python/py-event.h (evpy_emit_event): Use
4162 CPYCHECKER_STEALS_REFERENCE_TO_ARG.
4163 * python/python-internal.h (CPYCHECKER_STEALS_REFERENCE_TO_ARG):
4166 2013-05-20 Tom Tromey <tromey@redhat.com>
4168 * py-evtregistry.c (create_event_object): Decref
4169 eventregistry_object if PyList_New fails.
4171 2013-05-20 Tom Tromey <tromey@redhat.com>
4173 * py-cmd.c (gdbpy_string_to_argv): Check result of
4176 2013-05-20 Tom Tromey <tromey@redhat.com>
4178 * python/python.c (before_prompt_hook): Add cleanup to
4181 2013-05-20 Tom Tromey <tromey@redhat.com>
4183 * python/py-function.c (fnpy_init): Decref result of
4184 PyObject_GetAttrString.
4186 2013-05-20 Tom Tromey <tromey@redhat.com>
4188 * python/py-threadevent.c (get_event_thread): Use
4189 CPYCHECKER_RETURNS_BORROWED_REF.
4190 * python/python-internal.h (CPYCHECKER_RETURNS_BORROWED_REF):
4192 (pspace_to_pspace_object, objfile_to_objfile_object)
4193 (find_thread_object): Use it.
4195 2013-05-20 Tom Tromey <tromey@redhat.com>
4197 * python/py-arch.c (arch_object_type): Use
4198 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4199 * python/py-block.c (block_syms_iterator_object_type):
4200 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4201 * python/py-bpevent.c (breakpoint_event_object_type):
4202 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4203 * python/py-cmd.c (cmdpy_object_type): Use
4204 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4205 * python/py-continueevent.c (continue_event_object_type):
4206 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4207 * python/py-event.h (GDBPY_NEW_EVENT_TYPE):
4208 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4209 * python/py-events.h (thread_event_object_type):
4210 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4211 * python/py-evtregistry.c (eventregistry_object_type): Use
4212 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4213 * python/py-exitedevent.c (exited_event_object_type):
4214 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4215 * python/py-finishbreakpoint.c (finish_breakpoint_object_type):
4216 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4217 * python/py-function.c (fnpy_object_type): Use
4218 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4219 * python/py-inferior.c (inferior_object_type, membuf_object_type):
4220 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4221 * python/py-infthread.c (thread_object_type): Use
4222 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4223 * python/py-lazy-string.c (lazy_string_object_type):
4224 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4225 * python/py-newobjfileevent.c (new_objfile_event_object_type):
4226 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4227 * python/py-objfile.c (objfile_object_type): Use
4228 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4229 * python/py-param.c (parmpy_object_type):
4230 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4231 * python/py-progspace.c (pspace_object_type):
4232 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4233 * python/py-signalevent.c (signal_event_object_type):
4234 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4235 * python/py-symtab.c (symtab_object_type, sal_object_type): Use
4236 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4237 * python/py-type.c (type_object_type, field_object_type)
4238 (type_iterator_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4239 * python/py-internal.h (CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF): New
4241 (value_object_type, block_object_type, symbol_object_type)
4242 (event_object_type, stop_event_object_type, breakpoint_object_type)
4243 (frame_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
4245 2013-05-20 Andreas Tobler <andreas@fgznet.ch>
4247 * Makefile.in (ALL_TARGET_OBS): Add ppcfbsd-tdep.o.
4248 (ALLDEPFILES): Add ppcfbsd-nat.c and ppcfbsd-tdep.c.
4250 2013-05-20 Doug Evans <dje@google.com>
4252 When reading CU, stay in DWO. Be more tolerent of bad debug info.
4254 * dwarf2read.c (struct dwarf2_per_cu_data): New member
4255 reading_dwo_directly.
4256 (struct signatured_type): New member dwo_unit.
4257 (struct die_reader_specs): New member comp_dir.
4258 (create_signatured_type_table_from_index): Use malloc for
4259 all_type_units instead of objfile's obstack.
4260 (create_all_type_units): Ditto.
4261 (fill_in_sig_entry_from_dwo_entry): New function.
4262 (add_type_unit): New function.
4263 (lookup_dwo_signatured_type): New function.
4264 (lookup_dwp_signatured_type): New function.
4265 (lookup_signatured_type): New arg cu. All callers updated.
4266 (init_cu_die_reader): Initialize comp_dir.
4267 (read_cutu_die_from_dwo): New arg stub_comp_dir. All callers updated.
4268 Change assert of matching type signatures to call error on mismatch.
4269 (lookup_dwo_unit): Add assert.
4270 (init_tu_and_read_dwo_dies): New function.
4271 (init_cutu_and_read_dies): Call it.
4272 (build_type_unit_groups): Handle case of no type unit groups created.
4273 (hash_dwo_file, eq_dwo_file): Handle missing comp_dir.
4274 (lookup_dwo_cutu): Tweak complaint.
4275 (dwarf2_free_abbrev_table): Check for NULL abbrev_table.
4276 (dwarf2_per_objfile_free): Free all_type_units.
4278 2013-05-20 Joel Brobecker <brobecker@adacore.com>
4280 * windows-nat.c (handle_unload_dll): Add missing empty line.
4282 2013-05-20 Joel Brobecker <brobecker@adacore.com>
4284 * dwarf2read.c (prototyped_function_p): New function.
4285 (read_subroutine_type): Use it.
4287 2013-05-20 Joel Brobecker <brobecker@adacore.com>
4289 * rs6000-aix-tdep.c: De-indent some example code provided
4292 2013-05-17 Edjunior Machado <emachado@linux.vnet.ibm.com>
4294 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Check if the
4295 region is ok for a hardware watchpoint using the new ptrace interface
4298 2013-05-17 Doug Evans <dje@google.com>
4300 * NEWS: Mention new maintenance commands check-symtabs, and
4301 expand-symtabs, and renamed check-psymtabs.
4302 * psymtab.c (maintenance_check_psymtabs): Renamed from
4303 maintenance_check_symtabs. Only process already-expanded symbol
4305 (_initialize_psymtab): Update.
4306 * symmisc.c (maintenance_check_symtabs): New function.
4307 (maintenance_expand_name_matcher): New function
4308 (maintenance_expand_file_matcher): New function
4309 (maintenance_expand_symtabs): New function.
4310 (_initialize_symmisc): Add "mt check-symtabs" and "mt expand-symtabs"
4313 2013-05-17 Tom Tromey <tromey@redhat.com>
4315 * python/py-inferior.c (infpy_read_memory): Don't call
4316 PyErr_SetString if PyObject_New fails.
4317 * python/py-frame.c (frame_info_to_frame_object): Don't call
4318 PyErr_SetString if PyObject_New fails.
4320 2013-05-17 Pavel Chupin <pavel.v.chupin@intel.com>
4322 * acinclude.m4: Add check for dlopen in libdl.
4323 * configure.ac: Ditto.
4324 * configure: Regenerate.
4326 2013-05-17 Phil Muldoon <pmuldoon@redhat.com>
4328 * frame.c (frame_stash): Convert to htab.
4329 (frame_addr_hash): New function.
4330 (frame_addr_hash_eq): New function.
4331 (frame_stash_create): Convert function to create
4333 (frame_stash_add): Convert function to add an entry to a hash
4335 (frame_stash_find): Convert function to search the hash table.
4336 (frame_stash_invalidate): Convert function to empty the hash
4338 (get_frame_id): Only add to stash if a frame_id is created.
4339 (_initialize_frame): Call frame_stash_create.
4341 2013-05-16 Yue Lu <hacklu.newborn@gmail.com> (tiny change)
4343 * configure.ac: Ensure MIG is available when building for GNU Hurd
4345 * configure: Regenerate.
4347 2013-05-16 Joel Brobecker <brobecker@adacore.com>
4349 * dwarf2read.c (set_cu_language): Add DW_LANG_UPC handling.
4351 2013-05-16 Joel Brobecker <brobecker@adacore.com>
4353 * ada-lang.c (ada_make_symbol_completion_list): Make sure
4354 all cleanups are done before returning from this function.
4356 2013-05-15 Joel Brobecker <brobecker@adacore.com>
4358 * utils.h: #include "exceptions.h".
4359 (enum errors): Remove partial declaration.
4361 2013-05-15 Joel Brobecker <brobecker@adacore.com>
4363 * gdbarch.sh (core_xfer_shared_libraries_aix): New method.
4364 * gdbarch.h, gdbarch.c: Regenerate.
4365 * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX
4368 * rs6000-aix-tdep.h: New file.
4369 * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h.
4370 * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and
4372 (struct field_info, struct ld_info_desc): New types.
4373 (ld_info32_desc, ld_info64_desc): New static constants.
4374 (struct ld_info): New type.
4375 (rs6000_aix_extract_ld_info): New function.
4376 (rs6000_aix_shared_library_to_xml): Likewise.
4377 (rs6000_aix_ld_info_to_xml): Likewise.
4378 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
4379 (rs6000_aix_init_osabi): Add call to
4380 set_gdbarch_core_xfer_shared_libraries_aix.
4381 * rs6000-nat.c: Add "rs6000-aix-tdep.h" include.
4382 Remove "xml-utils.h" include.
4383 (LdInfo): Delete typedef.
4384 (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME):
4386 (rs6000_ptrace_ldinfo): Change return type to gdb_byte *.
4387 Adjust code accordingly.
4388 (rs6000_core_ldinfo): Delete, folded into
4389 rs6000_aix_core_xfer_shared_libraries_aix.
4390 (rs6000_xfer_shared_library): Delete.
4391 (rs6000_xfer_shared_libraries): Reimplement.
4393 2013-05-15 Markus Metzger <markus.t.metzger@intel.com>
4395 * record.c (record_goto_cmdlist): New.
4396 (cmd_record_goto): Split into this ...
4397 (cmd_record_goto_begin): ... this
4398 (cmd_record_goto_end): ... and this.
4399 (_initialize_record): Change "record goto" to prefix command.
4400 Add commands for "record goto begin" and "record goto end".
4401 Add an alias for "record goto start" to "record goto begin".
4403 2013-05-14 Jan Kratochvil <jan.kratochvil@redhat.com>
4405 * linespec.c (convert_linespec_to_sals): New comment for
4406 SOURCE_FILENAME assignment.
4408 2013-05-14 Jan Kratochvil <jan.kratochvil@redhat.com>
4410 * cleanups.c (restore_my_cleanups): Replace gdb_assert by
4413 2013-05-14 Tom Tromey <tromey@redhat.com>
4415 * eval.c (parse_and_eval_long): Make 'exp' const.
4416 * value.h (parse_and_eval_long): Update.
4418 2013-05-14 Tom Tromey <tromey@redhat.com>
4420 * ui-file.c (gdb_fopen): Make arguments const.
4421 * ui-file.h (gdb_fopen): Make arguments const.
4423 2013-05-14 Tom Tromey <tromey@redhat.com>
4425 * remote.c (remote_set_trace_notes): Make arguments const.
4426 * target.c (update_current_target): Update cast.
4427 * target.h (to_set_trace_notes): Make arguments const.
4429 2013-05-14 Tom Tromey <tromey@redhat.com>
4431 * go32-nat.c (go32_terminal_info): Make 'args' const.
4432 * inferior.h (child_terminal_info): Update.
4433 * inflow.c (child_terminal_info): Make 'args' const.
4434 * target.c (default_terminal_info): Make 'args' const.
4435 (debug_to_terminal_save_ours): Likewise.
4436 * target.h (struct target_ops) <to_terminal_info>: Make argument
4439 2013-05-13 Tom Tromey <tromey@redhat.com>
4441 * gcore.c (create_gcore_bfd): Make 'filename' const.
4442 * gcore.h (create_gcore_bfd): Make 'filename' const.
4443 * record-full.c (record_full_save): Make 'recfilename' const.
4444 * target.c (target_save_record): Make 'filename' const.
4445 * target.h (struct target_ops) <to_save_record>: Make 'filename'
4447 (target_save_record): Likewise.
4449 2013-05-13 Tom Tromey <tromey@redhat.com>
4452 * dwarf2read.c (dwarf2_record_block_ranges): Ensure that the
4453 ranges section has been read.
4455 2013-05-13 Tom Tromey <tromey@redhat.com>
4458 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
4459 STRUCTOP_PTR>: Return a not_lval value for
4460 EVAL_AVOID_SIDE_EFFECTS.
4461 * opencl-lang.c (evaluate_subexp_opencl): Return a not_lval value
4462 for EVAL_AVOID_SIDE_EFFECTS.
4464 2013-05-13 Joel Brobecker <brobecker@adacore.com>
4466 * rs6000-aix-tdep.c (rs6000_push_dummy_call): Convert
4467 floating point registers to register type before storing
4469 * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call):
4472 2013-05-10 Joel Brobecker <brobecker@adacore.com>
4473 Tom Tromey <tromey@redhat.com>
4475 * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
4477 * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
4479 * darwin-nat.c (darwin_pre_ptrace): Use mark_fd_no_cloexec.
4480 (darwin_ptrace_him): Use unmark_fd_no_cloexec.
4481 * inf-ttrace.c (do_cleanup_pfds): Use unmark_fd_no_cloexec.
4482 (inf_ttrace_prepare): Use mark_fd_no_cloexec.
4484 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
4485 Tom Tromey <tromey@redhat.com>
4488 * configure: Rebuild.
4489 * configure.ac (build_warnings): Do not use -Wformat-nonliteral
4492 2013-05-10 Pedro Alves <palves@redhat.com>
4494 * remote.c (_initialize_remote): Fix spelling of
4495 qXfer:traceframe-info:read packet in packet config command.
4497 2013-05-10 David Taylor <dtaylor@emc.com>
4501 * remote.c (remote_trace_set_readonly_regions): Do not overwrite
4502 "QTro" at start of packet.
4504 2013-05-10 Joel Brobecker <brobecker@adacore.com>
4506 * solib-aix.c (solib_aix_relocate_section_addresses):
4507 For the .bss section action, apply the same offset as
4510 2013-05-10 Joel Brobecker <brobecker@adacore.com>
4512 * solib-aix.c (solib_aix_relocate_section_addresses):
4513 Remove FIXME comment.
4515 2013-05-10 Joel Brobecker <brobecker@adacore.com>
4518 * sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
4519 New functions, directly copied from sparc-sol-thread.c.
4520 * sparc-sol-thread.c: Delete.
4521 * configure.ac: Remove code handling sparc-solaris-thread.c.
4522 * configure: Regenerate.
4524 2013-05-10 Phil Muldoon <pmuldoon@redhat.com>
4526 * stack.c (backtrace_command_1): Add "no-filters", and Python frame
4528 (backtrace_command): Add "no-filters" option parsing.
4529 (_initialize_stack): Alter help to reflect "no-filters" option.
4530 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-framefilter.o
4531 (SUBDIR_PYTHON_SRCS): Add py-framefilter.c
4532 (py-frame.o): Add target
4533 * data-directory/Makefile.in (PYTHON_DIR): Add Python frame
4535 * python/python.h: Add new frame filter constants, and flag enum.
4536 (apply_frame_filter): Add definition.
4537 * python/python.c (apply_frame_filter): New non-Python
4539 * python/py-utils.c (py_xdecref): New function.
4540 (make_cleanup_py_xdecref): Ditto.
4541 * python/py-objfile.c: Declare frame_filters dictionary.
4542 (objfpy_dealloc): Add frame_filters dealloc.
4543 (objfpy_new): Initialize frame_filters attribute.
4544 (objfile_to_objfile_object): Ditto.
4545 (objfpy_get_frame_filters): New function.
4546 (objfpy_set_frame_filters): New function.
4547 * python/py-progspace.c: Declare frame_filters dictionary.
4548 (pspy_dealloc): Add frame_filters dealloc.
4549 (pspy_new): Initialize frame_filters attribute.
4550 (pspacee_to_pspace_object): Ditto.
4551 (pspy_get_frame_filters): New function.
4552 (pspy_set_frame_filters): New function.
4553 * python/py-framefilter.c: New file.
4554 * python/lib/gdb/command/frame_filters.py: New file.
4555 * python/lib/gdb/frames.py: New file.
4556 * python/lib/gdb/__init__.py: Initialize global frame_filters
4558 * python/lib/gdb/FrameDecorator.py: New file.
4559 * python/lib/gdb/FrameIterator.py: New file.
4560 * mi/mi-cmds.c (mi_cmds): Add frame filters command.
4561 * mi/mi-cmds.h: Declare.
4562 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Add
4563 --no-frame-filter logic, and Python frame filter logic.
4564 (stack_enable_frame_filters): New function.
4565 (parse_no_frame_option): Ditto.
4566 (mi_cmd_stack_list_frames): Add --no-frame-filter and Python frame
4568 (mi_cmd_stack_list_locals): Ditto.
4569 (mi_cmd_stack_list_args): Ditto.
4570 (mi_cmd_stack_list_variables): Ditto.
4571 * NEWS: Add frame filter note.
4573 2013-05-09 Doug Evans <dje@google.com>
4575 * symfile.c (syms_from_objfile_1): Delete args offsets, num_offsets.
4576 All callers updated.
4577 (syms_from_objfile): Ditto. Make static.
4578 (symbol_file_add_with_addrs): Renamed from
4579 symbol_file_add_with_addrs_or_offsets. Delete args offsets,
4580 num_offsets. All callers updated.
4581 * symfile.h (syms_from_objfile): Delete.
4583 * symfile.c (decrement_reading_symtab): Add assert.
4584 (increment_reading_symtab): Ditto.
4586 2013-05-09 Joel Brobecker <brobecker@adacore.com>
4588 * source.c (forward_search_command): Replace call to getc
4590 (reverse_search_command): Likewise.
4592 2013-05-08 Doug Evans <dje@google.com>
4594 * psymtab.c (expand_symtabs_matching_via_partial): Fix file name
4597 2013-05-08 Joel Brobecker <brobecker@adacore.com>
4599 * sol-thread.c (info_cb): Factorize the code a little.
4601 2013-05-08 Joel Brobecker <brobecker@adacore.com>
4603 * sol-thread.c (info_cb): Rework the output of the "maintenance
4604 info sol-threads" command a bit.
4606 2013-05-08 Joel Brobecker <brobecker@adacore.com>
4608 * sol-thread.c (info_cb) [ti.ti_state == TD_THR_SLEEP]:
4609 Replace ti.ti_startfunc by ti.ti_pc.
4611 2013-05-08 Joel Brobecker <brobecker@adacore.com>
4613 * solib-aix.c (solib_aix_free_library_list): New function
4614 for the case where HAVE_LIBEXPAT is not defined.
4616 2013-05-07 Sergio Durigan Junior <sergiodj@redhat.com>
4618 PR breakpoints/15413:
4619 * breakpoint.c (condition_completer): Simplify the code to
4620 disconsider multiple locations of breakpoints when completing the
4621 "condition" command.
4623 2013-05-07 Pierre Muller <muller@sourceware.org>
4625 * common/linux-btrace.c: ARI fix: Include "gdb_wait.h"
4626 instead of <sys/wait.h>.
4628 2013-05-07 Pierre Muller <muller@sourceware.org>
4630 * nios2-tdep.c (nios2_dwarf_reg_to_regnum): ARI fix: remove
4631 trailing new line from warning message.
4633 2013-05-07 Pierre Muller <muller@sourceware.org>
4635 * contrib/ari/gdb_ari.sh (SOLIB_ADD, SOLIB_CREATE_INFERIOR_HOOK)
4636 (PC_SOLIB): Change type from ari_deprecate to ari_regression.
4638 2013-05-07 Joel Brobecker <brobecker@adacore.com>
4640 * rs6000-nat.c (rs6000_core_ldinfo): Remove '\n' at end of
4641 error message (ARI fix).
4643 2013-05-07 Joel Brobecker <brobecker@adacore.com>
4645 * features/library-list-aix.dtd: Replace library-list by
4647 * rs6000-nat.c: Replace library-list by library-list-aix
4649 * solib-aix.c: Likewise.
4651 2013-05-07 Joel Brobecker <brobecker@adacore.com>
4653 * target.h (enum target_object) [TARGET_OBJECT_LIBRARIES_AIX]:
4654 Renames TARGET_OBJECT_AIX_LIBRARIES.
4655 * rs6000-nat.c: Replace TARGET_OBJECT_AIX_LIBRARIES with
4656 TARGET_OBJECT_LIBRARIES_AIX throughout.
4657 * solib-aix.c: Likwise.
4659 2013-05-07 Yao Qi <yao@codesourcery.com>
4661 * solib-dsbt.c (struct dsbt_info) <enable_break2_done>: Remove.
4662 (get_dsbt_info, enable_break, dsbt_clear_solib): Update.
4664 2013-05-07 Yao Qi <yao@codesourcery.com>
4666 * solib-dsbt.c (enable_break): Declare.
4667 (dsbt_current_sos): Remove call to enable_break2.
4668 (enable_break2): Rename to enable_break. Set solib breakpoint
4669 on '_dl_debug_state'.
4670 (enable_break): Remove.
4672 2013-05-07 Luis Machado <lgustavo@codesourcery.com>
4674 * ppc-linux-nat.c (ppc_linux_new_thread): Clear the new thread's
4675 debug state prior to replicating existing hardware watchpoints or
4678 2013-05-07 Jan Kratochvil <jan.kratochvil@redhat.com>
4680 * gcore.c (gcore_create_callback): Ignore sections with
4681 separate_debug_objfile_backlink != NULL.
4683 2013-05-06 Sandra Loosemore <sandra@codesourcery.com>
4684 Andrew Jenner <andrew@codesourcery.com>
4685 Chung-Lin Tang <cltang@codesourcery.com>
4686 Julian Brown <julian@codesourcery.com>
4688 Based on the nios2-elf port from Altera Corporation.
4690 * Makefile.in (ALL_TARGET_OBS): Add nios2-tdep.o and
4692 (HFILES_NO_SRCDIR): Add nios2-tdep.h.
4693 (ALLDEPFILES): Add nios2-tdep.c and nios2-linux-tdep.c.
4694 * configure.tgt: Add nios2*-*-linux* and nios2*-*-* targets.
4695 * nios2-tdep.h: New.
4696 * nios2-tdep.c: New.
4697 * nios2-linux-tdep.c: New.
4698 * features/Makefile (WHICH): Add nios2-linux.
4699 (nios2-linux-expedite): Set.
4700 * features/nios2-cpu.xml: New.
4701 * features/nios2.xml: New.
4702 * features/nios2-linux.xml: New.
4703 * features/nios2.c: New (autogenerated).
4704 * features/nios2-linux.c: New (autogenerated).
4705 * regformats/nios2-linux.dat: New (autogenerated).
4706 * NEWS (Changes since GDB 7.6): Add new Nios II targets
4709 2013-05-06 Doug Evans <dje@google.com>
4711 * symfile.c: Whitespace cleanup.
4713 * solist.h (struct target_so_ops): New member clear_so.
4714 * solib-svr4.c (svr4_clear_so): New function.
4715 (_initialize_svr4_solib): Set svr4_so_ops.clear_so.
4716 * solib.c (clear_so): Renamed from free_so_symbols.
4717 All callers updated. Call target clear_so if it exists.
4719 2013-05-06 Tom Tromey <tromey@redhat.com>
4721 * ada-lang.c (ada_value_primitive_packed_val): Don't
4723 * value.c (set_value_parent): Incref the new parent and decref
4725 (value_copy, value_primitive_field): Use set_value_parent.
4727 2013-05-06 Tom Tromey <tromey@redhat.com>
4729 * dwarf2loc.c (invalid_synthetic_pointer): Move earlier.
4730 (indirect_pieced_value): Call dwarf2_fetch_constant_bytes
4732 * dwarf2loc.h (dwarf2_fetch_constant_bytes): Declare.
4733 * dwarf2read.c (write_constant_as_bytes)
4734 (dwarf2_fetch_constant_bytes): New functions.
4736 2013-05-06 Tom Tromey <tromey@redhat.com>
4738 * dwarf2read.c (dwarf2_const_value_data): Remove unused
4740 (dwarf2_const_value_attr): Update.
4742 2013-05-06 Tom Tromey <tromey@redhat.com>
4744 * somread.c (som_symfile_offsets): Add 'const' to addrs.
4745 * machoread.c (macho_symfile_offsets): Add 'const' to addrs.
4746 * xcoffread.c (xcoff_symfile_offsets): Add 'const' to addrs.
4749 2013-05-06 Tom Tromey <tromey@redhat.com>
4751 * dwarf2read.c (dwarf2_const_value_attr): Use 'obstack', not
4754 2013-05-06 Doug Evans <dje@google.com>
4756 * dbxread.c (process_one_symbol): Constify section_offsets parameter.
4757 * stabsread.h (process_one_symbol): Update declaration.
4758 * dwarf2read.c (dw2_relocate): Constify new_offsets, delta parameters.
4759 * elfread.c (elf_symfile_relocate_probe): Ditto.
4760 * psymtab.c (relocate_psymtabs): Ditto.
4761 * objfiles.c (objfile_relocate1): Constify new_offsets parameter.
4762 (objfile_relocate): Ditto.
4763 * objfiles.h (objfile_relocate): Update declaration.
4764 * symfile.c (relative_addr_info_to_section_offsets): Constify
4766 (default_symfile_offsets): Ditto.
4767 (syms_from_objfile_1): Constify offsets parameter.
4768 (syms_from_objfile): Ditto.
4769 (symbol_file_add_with_addrs_or_offsets): Ditto.
4770 (symfile_map_offsets_to_segments): Constify data parameter.
4771 * symfile.h (struct quick_symbol_functions): Constify new_offsets,
4772 delta parameters of member relocate.
4773 (struct sym_probe_fns): Constify new_offsets,
4774 delta parameters of member sym_relocate_probe.
4775 (struct sym_fns): Constify section_addr_info parameter of member
4777 (relative_addr_info_to_section_offsets): Update declaration.
4778 (default_symfile_offsets): Ditto.
4779 (syms_from_objfile): Ditto.
4780 (symfile_map_offsets_to_segments): Ditto.
4782 * symfile.c (syms_from_objfile_1): Use correct section count when
4783 objfile->sf == NULL.
4785 2013-05-06 Mike Frysinger <vapier@gentoo.org>
4787 * common/linux-btrace.c (intel_supports_btrace): Fix indentation.
4789 2013-05-06 Doug Evans <dje@google.com>
4791 * psympriv.h (struct partial_symtab): Augment comment for member
4794 2013-05-06 Joel Brobecker <brobecker@adacore.com>
4796 Reimplement shared library support on ppc-aix...
4797 * target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
4798 * features/library-list-aix.dtd: New file.
4799 * solib-aix.h, solib-aix.c: New file.
4800 * rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
4801 (rs6000_find_toc_address_hook): Delete.
4802 (rs6000_push_dummy_call): Rewrite code setting the TOC value.
4803 (rs6000_aix_init_osabi): Register solib_aix_so_ops.
4804 * rs6000-nat.c: Remove "xcoffsolib.h" include. Include
4806 (map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
4807 (vmap_symtab, fixup_breakpoints): Delete.
4808 (rs6000_xfer_shared_libraries): New function.
4809 (rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
4810 (vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
4811 (xcoff_relocate_symtab, xcoff_relocate_core): Delete.
4812 (rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
4813 (rs6000_xfer_shared_library): New function.
4814 (find_toc_address): Delete.
4815 (_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
4816 * rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
4817 * xcoffread.c (record_minimal_symbol): Reloate symbol address
4818 before creating minimal symbol. Adjust function description
4820 (scan_xcoff_symtab): Replace call to
4821 prim_record_minimal_symbol_and_info by call to
4822 record_minimal_symbol.
4823 (xcoff_symfile_offsets): Reimplement mostly as a wrapper
4824 around default_symfile_offsets.
4825 * configure.tgt: Add solib-aix.o to gdb_target_obs for
4826 powerpc-aix targets.
4827 * config/rs6000/nm-rs6000.h: Delete.
4828 * config/powerpc/aix.mh (NAT_FILE): Delete.
4829 (NATDEPFILES): Remove xcoffsolib.o.
4830 * Makefile.in (XMLFILES): Add library-list-aix.dtd.
4831 (ALL_TARGET_OBS): Add solib-aix.o.
4832 (HFILES_NO_SRCDIR): Remove xcoffsolib.h and
4833 config/rs6000/nm-rs6000.h. Add solib-aix.h.
4834 (ALLDEPFILES): Add solib-aix.c. Remove xcoffsolib.c.
4835 * xcoffsolib.h, xcoffsolib.c: Delete.
4837 * solib.c (reload_shared_libraries): Remove reference to
4838 SOLIB_CREATE_INFERIOR_HOOK.
4839 * breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
4840 (disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
4841 (momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
4843 * corelow.c (deprecated_core_resize_section_table): Delete.
4844 * exec.c: Remove include of xcoffsolib.h".
4845 (map_vmap, vmap): Delete.
4846 (exec_close_1): Remove references to vmap.
4847 (exec_file_attach): Remove vmap handling code, and reference
4848 to DEPRECATED_IBM6000_TARGET.
4849 (bfdsec_to_vmap): Delete.
4850 (exec_files_info): Remove block of code handling VMAP.
4851 * infcmd.c (post_create_inferior): Remove reference to
4852 SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
4853 * infrun.c (follow_exec): Remove reference to
4854 SOLIB_CREATE_INFERIOR_HOOK.
4855 * stack.c (print_frame): Remove reference to PC_SOLIB.
4856 * solib-dsbt.c (dsbt_current_sos): Adjust comment.
4857 (dsbt_relocate_main_executable): Likewise.
4858 * solib-frv.c (frv_current_sos): Likewise.
4860 2013-05-06 Joel Brobecker <brobecker@adacore.com>
4862 * sol-thread.c (rw_common): Cast BUF to "gdb_byte *" in calls
4863 to target_write_memory and target_read_memory.
4865 2013-05-06 Joel Brobecker <brobecker@adacore.com>
4867 * darwin-nat.c (darwin_setup_fake_stop_event): New function.
4868 (darwin_attach): Adjust using darwin_setup_fake_stop_event.
4870 2013-05-06 Joel Brobecker <brobecker@adacore.com>
4872 * darwin-nat.c: Replace all "%x" instances in format strings
4873 into "0x%x" throughout.
4875 2013-05-06 Joel Brobecker <brobecker@adacore.com>
4877 * darwin-nat.c (darwin_mourn_inferior): Replace call to
4878 gdb_assert by call to MACH_CHECK_ERROR.
4879 (darwin_attach_pid): Raise an error rather than a failed
4880 assertion when various system calls failed. Report a warning
4881 instead of raising a failed assertion when PREV_NOT is not NULL
4882 after call to mach_port_request_notification.
4883 (darwin_ptrace_me): Raise an error rather than a failed
4884 assertion when read returns nonzero.
4886 2013-05-06 Joel Brobecker <brobecker@adacore.com>
4888 * amd64-darwin-tdep.c: Remove #include "gdb_assert.h".
4890 2013-05-05 Jan Kratochvil <jan.kratochvil@redhat.com>
4892 * cleanups.c (restore_my_cleanups): New gdb_assert for SENTINEL_CLEANUP.
4894 2013-05-05 Jan Kratochvil <jan.kratochvil@redhat.com>
4896 * event-top.c (display_gdb_prompt): Call missing do_cleanups.
4897 * infcmd.c (get_return_value) <!stop_regs>: Do not overwrite CLEANUP.
4898 * symfile.c (symfile_bfd_open): New variable back_to. Do not leave
4899 a stale cleanup. Fix double free of NAME.
4901 2013-05-04 Eli Zaretskii <eliz@gnu.org>
4903 * windows-nat.c (windows_delete_thread): Accept an additional
4904 argument, the thread's exit code, and announce thread death when
4905 print_thread_events is non-zero and we are deleting a thread that
4906 is not the main thread.
4907 (get_windows_debug_event): Pass thread exit code to
4908 windows_delete_thread.
4910 2013-05-03 Kevin Buettner <kevinb@redhat.com>
4912 * v850-tdep.c (elf-bfd.h, elf/v850.h): Include.
4913 (R_149_REGNUM, E_NUM_OF_V850E2_REGS, E_SELID_1_R0_REGNUM)
4914 (E_SELID_1_R31_REGNUM, E_SELID_2_R0_REGNUM, E_SELID_2_R31_REGNUM)
4915 (E_SELID_3_R0_REGNUM, E_SELID_3_R31_REGNUM, E_SELID_4_R0_REGNUM)
4916 (E_SELID_4_R31_REGNUM, E_SELID_5_R0_REGNUM, E_SELID_5_R31_REGNUM)
4917 (E_SELID_6_R0_REGNUM, E_SELID_6_R31_REGNUM, E_SELID_7_R0_REGNUM, E_SELID_7_R31_REGNUM)
4918 (E_VR0_REGNUM, E_VR31_REGNUM, E_NUM_OF_V850E3V5_REGS): Define.
4919 (v850_abi, V850_ABI_GCC, V850_ABI_RH850): New enum and constants.
4920 (gdbarch_tdep): New struct.
4921 (v850e2_register_name): Use E_NUM_OF_V850E2_REGS instead of
4923 (v850e3v5_register_name): New function.
4924 (v850_register_type): v850e3v5 vector registers are 64-bits wide.
4925 (v850_use_struct_convention): Add `gdbarch' parameter. Add new
4926 code handling the struct return conventions for the RH850 ABI.
4928 (v850_eight_byte_align_p): New function.
4929 (v850_push_call_dummy): Push structs by value, not by reference
4930 for the RH850 ABI. Add support for eight byte alignment.
4931 (v850_dbtrap_breakpoint_from_pc): New function.
4932 (v850_gdbarch_init): Add ABI detection code. Register
4933 v850e3v5_register_name for the v850e3v5 architecture. Set the
4934 number of registers for v850e3v5. Register
4935 v850_dbtrap_breakpoint_from_pc as appropriate.
4936 (_initialize_gdbarch_init): Registration bfd_arch_v850_rh850.
4938 2013-05-03 Doug Evans <dje@google.com>
4940 * objfiles.c (objfile_relocate): Use gdb_bfd_count_sections instead
4941 of bfd_count_sections.
4942 * solib-target.c (solib_target_relocate_section_addresses): Ditto.
4943 * symfile.c (default_symfile_offsets): Ditto.
4944 (syms_from_objfile_1): Ditto. Make dummy addrs list an array of
4945 one entry, not bfd_count_sections entries.
4947 2013-05-03 Kevin Buettner <kevinb@redhat.com>
4949 * rl78-tdep.c (rl78_register_reggroup_p): Include SP in the
4950 `save' and `restore' register groups. Don't include SPL
4951 or SPH in these groups.
4952 (rl78_dwarf_reg_to_regnum): Adjust mapping for
4953 RL78_PC_REGNUM. Add mappings for RL78_PSW_REGNUM,
4954 RL78_ES_REGNUM, and RL78_CS_REGNUM.
4955 (rl78_gdbarch_init): Set `dwarf2_addr_size' to 4. Invoke
4956 dwarf2_append_unwinders().
4958 2013-05-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
4960 * break-catch-sig.c (signal_catchpoint_breakpoint_hit): Do not
4961 ignore SIGINT and SIGTRAP in case these internal signals are
4964 2013-05-01 Joel Brobecker <brobecker@adacore.com>
4966 * darwin-nat.c (darwin_read_write_inferior): Change types
4967 of parameters rdaddr and wraddr to "gdb_byte *". Change type
4968 of copy_count to "mach_msg_type_number_t".
4969 (darwin_read_dyld_info): Change type of parameter
4970 rdaddr to "gdb_byte *".
4972 2013-05-01 Joel Brobecker <brobecker@adacore.com>
4974 * solib-ia64-hpux.c (ia64_hpux_read_dynamic_info): Change cast
4975 of &info->load_map from "char *" to "gdb_byte *".
4977 2013-05-01 Joel Brobecker <brobecker@adacore.com>
4979 * ia64-tdep.c (ia64_access_fpreg): Change cast of val
4980 from "char *" to "gdb_byte *".
4981 (ia64_access_rse_fpreg, ia64_access_mem): Likewise.
4983 2013-04-30 Doug Evans <dje@google.com>
4985 * dwarf2read.c (lookup_dwo_unit): Return NULL if DWO not found.
4986 (init_cutu_and_read_dies): Flag a complaint, not error, for bad
4987 DWO stub. If DWO isn't found, just use stub.
4988 (lookup_dwo_cutu): Don't try DWO if there's a DWP file.
4990 * dwarf2read.c (dw2_find_symbol_file): Initialize filename before
4991 calling init_cutu_and_read_dies.
4993 2013-03-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
4995 * target-descriptions.c (maint_print_c_tdesc_cmd):
4996 Add case to parse structures as register types and
4999 2013-04-30 Walfred Tedeschi <walfred.tedeschi@intel.com>
5001 * MAINTAINERS (Write After Approval): Add myself to the list.
5003 2013-04-30 Joel Brobecker <brobecker@adacore.com>
5005 * sol-thread.c (rw_common): Change type of parameter "buf"
5007 (ps_pdwrite, ps_ptwrite): Cast parameter "buf" in call to
5008 rw_common to "gdb_byte *" instead of "char *".
5010 2013-04-30 Joel Brobecker <brobecker@adacore.com>
5012 * sol-thread.c (info_cb) [ti.ti_startfunc != 0]: Change type
5013 of local variable msym to const struct bound_minimal_symbol.
5014 Adjust use accordingly.
5015 [ti.ti_state == TD_THR_SLEEP]: Likewise.
5017 2013-04-30 Samuel Thibault <samuel.thibault@gnu.org>
5019 * i386gnu-nat.c (CREG_OFFSET): New macro.
5020 (creg_offset): New array.
5021 (CREG_ADDR): Use creg_offset instead of reg_offset.
5023 2013-04-30 Joel Brobecker <brobecker@adacore.com>
5025 * mep-tdep.c (mep_write_pc): Delete.
5026 (mep_gdbarch_init): Remove call to set_gdbarch_write_pc.
5027 Add call to set_gdbarch_pc_regnum.
5029 2013-04-30 Joel Brobecker <brobecker@adacore.com>
5031 * common/filestuff.c: Replace #include <dirent.h> by
5032 #include "gdb_dirent.h".
5034 2013-04-30 Joel Brobecker <brobecker@adacore.com>
5036 * common/filestuff.c: Replace #include <sys/stat.h> by
5037 #include "gdb_stat.h".
5039 2013-04-29 Pierre Muller <muller@sourceware.org>
5041 * dwarf2read.c (handle_DW_AT_stmt_list): Avoid ARI warning for
5042 editCase function rule.
5043 (get_DW_AT_signature_type): Likewise.
5045 2013-04-29 Joel Brobecker <brobecker@adacore.com>
5047 * m32r-tdep.c (m32r_write_pc): Delete.
5048 (m32r_gdbarch_init): Remove call to set_gdbarch_write_pc.
5049 Add call to set_gdbarch_pc_regnum.
5051 2013-04-29 Pierre Muller <muller@sourceware.org>
5053 * ./contrib/ari/gdb_ari.sh (editCase rule): Fix spelling error.
5055 2013-04-29 Joel Brobecker <brobecker@adacore.com>
5057 * dwarf2read.c (get_DW_AT_signature_type): Add ARI marker.
5059 2013-04-28 Yao Qi <yao@codesourcery.com>
5061 * solib-dsbt.c (fetch_loadmap): Re-indent.
5062 (displacement_from_map, enable_break2): Likewise.
5063 (dsbt_relocate_section_addresses): Likewise.
5065 2013-04-26 Joel Brobecker <brobecker@adacore.com>
5069 2013-04-25 Andreas Kaufmann <Andreas.Kaufmann@synopsys.com>
5072 * dwarf2read.c (process_full_comp_unit): Always create a static
5075 2013-04-25 Hui Zhu <hui@codesourcery.com>
5077 * breakpoint.c (build_target_command_list): Change loc->cond_bytecode
5078 to loc->cmd_bytecode.
5080 2013-04-24 Doug Evans <dje@google.com>
5082 * dwarf2read.c (setup_type_unit_groups): Fix comment.
5084 2013-04-22 Keith Seitz <keiths@redhat.com>
5086 * tracepoint.c (trace_save): Call the writer's start method.
5088 2013-04-24 Muhammad Bilal <mbilal@codesourcery.com>
5091 * cli/cli-decode.c (lookup_command): Show an error if there is no space
5094 2013-04-23 Tom Tromey <tromey@redhat.com>
5096 * common/filestuff.c: Check USE_WIN32API before including
5098 (HAVE_F_GETFD): New define.
5099 (mark_cloexec): Check HAVE_F_GETFD.
5100 (gdb_open_cloexec): Change 'mode' to unsigned long.
5101 (gdb_socketpair_cloexec): Check HAVE_SOCKETPAIR.
5102 (gdb_pipe_cloexec): Check HAVE_PIPE.
5103 * common/filestuff.h (gdb_open_cloexec): Change 'mode' to unsigned
5106 2013-04-23 Hui Zhu <hui@codesourcery.com>
5109 * breakpoint.c (bpstat_what): Add BPSTAT_WHAT_SINGLE to bp_dprintf.
5111 2013-04-23 Hui Zhu <hui@codesourcery.com>
5114 * breakpoint.c (dprintf_print_recreate): New.
5115 (save_breakpoints): Let it not save dprintf commands.
5116 (initialize_breakpoint_ops): Set dprintf_print_recreate.
5118 2013-04-22 Tom Tromey <tromey@redhat.com>
5121 * Makefile.in (SFILES): Add filestuff.c
5122 (COMMON_OBS): Add filestuff.o.
5123 (filestuff.o): New target.
5124 * auto-load.c (auto_load_objfile_script_1): Use
5126 * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
5127 * cli/cli-cmds.c (shell_escape): Call close_most_fds.
5128 * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
5129 * common/agent.c (gdb_connect_sync_socket): Use
5131 * common/filestuff.c: New file.
5132 * common/filestuff.h: New file.
5133 * common/linux-osdata.c (linux_common_core_of_thread)
5134 (command_from_pid, commandline_from_pid, print_source_lines)
5135 (linux_xfer_osdata_shm, linux_xfer_osdata_sem)
5136 (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
5138 * common/linux-procfs.c (linux_proc_get_int)
5139 (linux_proc_pid_has_state): Use gdb_fopen_cloexec.
5140 * config.in, configure: Rebuild.
5141 * configure.ac: Don't check for sys/socket.h. Check for
5143 * corelow.c (core_open): Use gdb_open_cloexec.
5144 * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
5145 * fork-child.c (fork_inferior): Call close_most_fds.
5146 * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
5147 * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
5148 * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
5149 Use gdb_fopen_cloexec.
5150 (linux_proc_xfer_partial, linux_proc_xfer_spu): Use
5152 (linux_async_pipe): Use gdb_pipe_cloexec.
5153 * remote-fileio.c (remote_fileio_func_open): Use
5155 * remote.c (remote_file_put, remote_file_get): Use
5157 * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
5159 * ser-tcp.c (net_open): Use gdb_socket_cloexec.
5160 * ser-unix.c (hardwire_open): Use gdb_open_cloexec.
5161 * solib.c (solib_find): Use gdb_open_cloexec.
5162 * source.c (openp, find_and_open_source): Use gdb_open_cloexec.
5163 * tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
5164 (tfile_open): Use gdb_open_cloexec.
5165 * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
5166 * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
5167 * xml-support.c (xml_fetch_content_from_file): Use
5169 * main.c (captured_main): Call notice_open_fds.
5171 2013-04-22 Edjunior Machado <emachado@linux.vnet.ibm.com>
5173 * remote-sim.c (dump_mem): Change the type of 'buf' parameter from
5174 'char *' to 'gdb_byte *'.
5175 (gdbsim_store_register): Change the type of 'tmp' from 'char' to
5178 2013-04-22 Yao Qi <yao@codesourcery.com>
5180 * infrun.c: Fix typo in comment.
5182 2013-04-22 Andrew Haley <aph@redhat.com>
5184 * arm-tdep.c (BranchDest): Cast result as "unsigned long",
5187 2013-04-20 Yao Qi <yao@codesourcery.com>
5189 * ctf.c (ctf_fetch_registers): Change the type of 'regs' from
5190 'char *' to 'gdb_byte *'. Cast the return value of
5191 'bt_ctf_get_char_array' to 'gdb_byte *'.
5193 2013-04-19 Pedro Alves <palves@redhat.com>
5195 * configure.ac (build_warnings): Replace -Wno-pointer-sign with
5197 * configure: Regenerate.
5199 2013-04-19 Pedro Alves <palves@redhat.com>
5201 * ser-tcp.c (net_read_prim): Cast second argument to recv to
5204 2013-04-19 Pedro Alves <palves@redhat.com>
5206 * monitor.c (monitor_write_memory, monitor_write_memory_bytes):
5207 Change type of 'myaddr' parameter to gdb_byte pointer.
5208 (monitor_write_memory_longlongs): Likewise. Cast 'myaddr' pointer
5209 to 'long long' pointer instead of to 'unsigned long long'.
5210 (monitor_write_memory_block, monitor_read_memory_single)
5211 (monitor_read_memory): Change type of 'myaddr' parameter to
5214 2013-04-19 Pedro Alves <palves@redhat.com>
5216 * record.c (validate_history_size): Make parameter 'setting'
5219 2013-04-19 Pedro Alves <palves@redhat.com>
5221 * ctf.c (ctf_write_uploaded_tsv, ctf_write_uploaded_tp): Add casts
5224 2013-04-19 Pedro Alves <palves@redhat.com>
5226 * cp-valprint.c (cp_print_class_member): Change type of 'fieldno'
5229 2013-04-19 Pedro Alves <palves@redhat.com>
5231 * ada-lang.c (print_it_exception): Add cast to gdb_byte *.
5232 * ada-tasks.c (read_fat_string_value): Likewise.
5234 2013-04-19 Pedro Alves <palves@redhat.com>
5236 * dwarf2-frame.c (execute_cfa_program): Make 'bytes_read' local
5237 unsigned. Pass 'tmp' to safe_read_uleb128 instead of the signed
5238 'offset', and adjust.
5240 2013-04-19 Pedro Alves <palves@redhat.com>
5242 * dwarf2read.c (dwarf2_get_dwz_file): Add cast to const char *.
5243 (read_index_from_section): Add cast to 'char *'.
5245 2013-04-19 Pedro Alves <palves@redhat.com>
5247 * xcoffread.c (xcoff_initial_scan): Add cast to 'char *'.
5249 2013-04-19 Pedro Alves <palves@redhat.com>
5251 * coff-pe-read.c (read_pe_exported_syms): Handle strings as char.
5253 2013-04-19 Pedro Alves <palves@redhat.com>
5255 * record-full.c (record_full_get_bookmark): Change local 'ret'
5256 type to char * and add cast to gdb_byte *.
5257 (record_full_goto_bookmark): Handle 'bookmark' argument as a
5259 * reverse.c (goto_bookmark_command): Add casts to gdb_byte *.
5261 2013-04-19 Pedro Alves <palves@redhat.com>
5263 * python/py-inferior.c (infpy_write_memory): Add cast to gdb_byte
5264 * python/py-prettyprint.c (print_string_repr): Change type of
5265 'output' local to char *. Add cast to gdb_byte * in
5266 LA_PRINT_STRING call.
5267 (print_children): Change type of 'output' local to char *.
5268 * python/py-value.c (valpy_string): Add cast to const char * in
5269 PyUnicode_Decode call.
5271 2013-04-19 Pedro Alves <palves@redhat.com>
5273 * remote-mips.c (mips_cksum): Rename 'data' parameter to 'datastr'
5274 and change its type to 'const char *'. Adjust.
5275 (mips_send_packet): Add cast to 'char *', and remove cast to
5277 (mips_receive_packet): Remove cast to 'unsigned char *'.
5278 (mips_load_srec): Use bfd_byte.
5279 (pmon_makeb64, pmon_zeroset): Make 'chksum' parameter unsigned.
5280 (pmon_checkset): Make 'value' parameter unsigned.
5282 2013-04-19 Pedro Alves <palves@redhat.com>
5284 * common/agent.c (agent_run_command): Add cast to gdb_byte *.
5286 2013-04-19 Pedro Alves <palves@redhat.com>
5288 * remote.c (remote_write_bytes_aux, compare_sections_command)
5290 (remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
5291 (remote_hostio_readlink, remote_bfd_iovec_pread)
5292 (remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
5293 binary buffer, and char when buffer is used as string.
5294 * tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
5295 (trace_save, tfile_open, traceframe_walk_blocks)
5296 (tfile_fetch_registers): Likewise.
5298 2013-04-19 Pedro Alves <palves@redhat.com>
5300 * ser-base.c (ser_base_write): Change prototype -- take 'void *'
5301 buffer and size_t size. Adjust.
5302 * ser-base.h (ser_base_write): Adjust.
5303 * ser-go32.c (cnts): Change type to size_t.
5304 (dos_write): Change prototype -- take 'void *'
5305 buffer and size_t size. Adjust.
5306 (dos_info): Print elements of 'cnts' as unsigned long.
5307 * serial.c (serial_write): Likewise.
5308 * serial.h (serial_write): Adjust.
5309 (struct serial_ops) <write>: Change prototype -- take 'void *'
5310 buffer and size_t size. Adjust.
5312 2013-04-19 Pedro Alves <palves@redhat.com>
5314 * c-lang.c (evaluate_subexp_c): Cast result of obstack_base to
5316 * linux-tdep.c (linux_make_mappings_corefile_notes): Likewise.
5318 2013-04-19 Pedro Alves <palves@redhat.com>
5320 * alpha-tdep.c (alpha_extract_return_value): Use
5321 regcache_cooked_read_unsigned to read 'v0'.
5323 2013-04-19 Pedro Alves <palves@redhat.com>
5325 * xtensa-tdep.c (execute_l32e, execute_s32e): Change type of
5326 parameters 'at', 'as' and 'offset' to uint32_t.
5328 2013-04-19 Pedro Alves <palves@redhat.com>
5330 * aarch64-tdep.c (aarch64_analyze_prologue): Change type of local
5331 'is64' to signed 'int'.
5333 2013-04-19 Pedro Alves <palves@redhat.com>
5335 * s390-tdep.c (is_rs, is_rsy, is_rx, is_rxy): Change type of 'd2'
5338 2013-04-19 Pedro Alves <palves@redhat.com>
5340 * ppc-linux-tdep.c (ppc_skip_trampoline_code): Change local
5341 'insnbuf' buffer type to unsigned int[].
5343 2013-04-19 Pedro Alves <palves@redhat.com>
5345 * mips-tdep.c (mips_read_pc): Change local 'pc' type to LONGEST.
5347 2013-04-19 Pedro Alves <palves@redhat.com>
5349 * mep-tdep.c (mep_get_insn): Change 'insn' parameter type to
5352 2013-04-19 Pedro Alves <palves@redhat.com>
5354 * alpha-tdep.c (heuristic_fence_post): Change type to int.
5355 (alpha_heuristic_proc_start): Adjust to check -1 instead of
5357 * mips-tdep.c (heuristic_fence_post): Change type to int.
5358 (heuristic_proc_start): Adjust to check -1 instead of UINT_MAX.
5360 2013-04-19 Pedro Alves <palves@redhat.com>
5362 * cris-tdep.c (usr_cmd_cris_version): Make unsigned.
5363 (struct gdbarch_tdep) <cris_version>: Make unsigned.
5364 (cris_spec_reg_applicable, cris_gdbarch_init): Adjust locals.
5366 2013-04-19 Pedro Alves <palves@redhat.com>
5368 * avr-tdep.c (avr_io_reg_read_command): New local 'bufstr'. Use
5369 it to get a string view of the byte buffer.
5370 * i386-cygwin-tdep.c (core_process_module_section): Change local 'buf'
5371 type to gdb_byte *. Adjust.
5372 * linux-tdep.c (linux_info_proc, linux_find_memory_regions_full):
5373 Change local to char *.
5374 * solib-darwin.c (find_program_interpreter): Change return type to
5376 (darwin_solib_get_all_image_info_addr_at_init): Adjust.
5377 * solib-dsbt.c (enable_break2): Change local 'buf' to char *.
5378 * solib-frv.c (enable_break2): Change local 'buf' to char *.
5379 * solib-spu.c (spu_current_sos): Add gdb_byte * cast.
5380 * solib-svr4.c (find_program_interpreter): Change return type to
5382 (enable_break): Change local 'interp_name' to char *.
5383 * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
5384 * spu-tdep.c (spu_pseudo_register_read_spu): Add cast to 'char *'.
5385 (spu_pseudo_register_write_spu): Use char for string buffer.
5387 (info_spu_event_command, info_spu_signal_command): Add casts to
5390 2013-04-19 Pedro Alves <palves@redhat.com>
5392 * aarch64-tdep.c (aarch64_default_breakpoint): Change type to
5394 (aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
5395 * ada-lang.c (ada_value_assign): Use gdb_byte.
5396 * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
5397 (alphanbsd_sigtramp_offset): Use gdb_byte.
5398 * arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
5399 (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
5400 (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
5401 (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
5402 (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
5403 * arm-tdep.c (arm_stub_unwind_sniffer)
5404 (arm_displaced_init_closure): Use gdb_byte.
5405 (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
5406 (arm_default_thumb_le_breakpoint)
5407 (arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
5408 * arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
5409 thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
5410 * arm-wince-tdep.c (arm_wince_le_breakpoint)
5411 (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
5412 * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
5413 (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
5414 (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
5415 * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
5416 (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
5417 * cris-tdep.c (push_stack_item, cris_push_dummy_call)
5418 (cris_store_return_value, cris_extract_return_value): Use
5420 (constraint): Change type of parameter to char * from signed
5421 char*. Use gdb_byte.
5422 * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
5423 of local buffer to gdb_byte *.
5424 * dwarf2read.c (read_index_from_section): Use gdb_byte.
5425 (create_dwp_hash_table): Change type of locals to gdb_byte *.
5426 (add_address_entry): Change type of local buffer to gdb_byte[].
5427 * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
5428 (frv_push_dummy_call): Use gdb_byte.
5429 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
5430 (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
5431 (hppa_hpux_supply_save_state): Use gdb_byte.
5432 * hppa-tdep.c (hppa32_push_dummy_call)
5433 (hppa64_convert_code_addr_to_fptr): Use gdb_byte.
5434 * ia64-tdep.c (extract_bit_field, replace_bit_field)
5435 (slotN_contents, replace_slotN_contents): Change type of parameter
5437 (fetch_instruction, ia64_pseudo_register_write)
5438 (ia64_register_to_value, ia64_value_to_register)
5439 (ia64_extract_return_value, ia64_store_return_value)
5440 (ia64_push_dummy_call): Use gdb_byte.
5441 * m32c-tdep.c (m32c_return_value): Remove cast.
5442 * m68hc11-tdep.c (m68hc11_pseudo_register_write)
5443 (m68hc11_push_dummy_call, m68hc11_store_return_value): Use
5445 * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
5446 * mn10300-tdep.c (mn10300_store_return_value)
5447 (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
5449 * moxie-tdep.c (moxie_process_readu): Use gdb_byte.
5450 (moxie_process_record): Remove casts.
5451 * ppc-ravenscar-thread.c (supply_register_at_address)
5452 (ppc_ravenscar_generic_store_registers): Use gdb_byte.
5453 * ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
5454 * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
5455 * remote-mips.c (mips_xfer_memory): Use gdb_byte.
5456 * remote.c (compare_sections_command): Use gdb_byte.
5457 * score-tdep.c (score7_free_memblock): Change type of parameter to
5459 * sh-tdep.c (sh_justify_value_in_reg): Change return type to
5460 gdb_byte *. Use gdb_byte.
5461 (sh_push_dummy_call_fpu): Use gdb_byte.
5462 (sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
5463 (sh_store_return_value_nofpu, sh_store_return_value_fpu)
5464 (sh_register_convert_to_virtual, sh_register_convert_to_raw):
5465 Change parameter type to 'gdb_byte *'. Use gdb_byte.
5466 (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
5467 * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
5468 (sh64_store_return_value, sh64_register_convert_to_virtual):
5469 Change parameter type to 'gdb_byte *'. Use gdb_byte.
5470 (sh64_pseudo_register_write): Use gdb_byte.
5471 * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
5472 * solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
5474 (irix_current_sos): Use gdb_byte.
5475 * solib-som.c (som_current_sos): Use gdb_byte.
5476 * sparc-ravenscar-thread.c (supply_register_at_address)
5477 (sparc_ravenscar_generic_store_registers): Use gdb_byte.
5478 * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
5479 * spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
5480 * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
5482 * tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
5484 * tracepoint.c (tfile_fetch_registers): Use gdb_byte.
5485 * xstormy16-tdep.c (xstormy16_extract_return_value)
5486 (xstormy16_store_return_value): Change parameter type to
5487 'gdb_byte *'. Adjust.
5488 (xstormy16_push_dummy_call): Use gdb_byte.
5489 * xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
5490 (call0_analyze_prologue, execute_code): Use gdb_byte.
5492 2013-04-19 Vladimir Kargov <kargov@gmail.com>
5493 Pedro Alves <palves@redhat.com>
5495 * i387-tdep.c (i387_print_float_info): Use gdb_byte for pointer to
5498 2013-04-17 Doug Evans <dje@google.com>
5500 * dwarf2read.c (struct signatured_type): New member type.
5501 (struct attribute): Replace member signatured_type with signature.
5502 (DW_SIGNATURE): Replaces DW_SIGNATURE_TYPE.
5503 (read_call_site_scope): Call follow_die_ref instead of
5504 follow_die_ref_or_sig.
5505 (read_structure_type): Rewrite handling of signatured types.
5506 (read_enumeration_type): Ditto.
5507 (read_attribute_value): Update.
5508 (build_error_marker_type): New function.
5509 (lookup_die_type): Add assert. Rewrite handling of signatured types.
5510 Don't call error for bad types, just build an error marker type.
5511 (dump_die_shallow): Update.
5512 (follow_die_sig_1): Renamed from follow_die_sig.
5513 Don't call error for bad types, instead return NULL.
5514 (follow_die_sig): New function.
5515 (get_signatured_type, get_DW_AT_signature_type): New functions.
5517 2013-04-17 Yufeng Zhang <yufeng.zhang@arm.com>
5519 * aarch64-tdep.c (aarch64_write_pc): Removed.
5520 (aarch64_gdbarch_init): Remove set_gdbarch_write_pc of the above
5523 2013-04-17 Yao Qi <yao@codesourcery.com>
5525 * top.c (print_gdb_configuration): Print configure-time
5526 parameter on using libbabeltrace or not.
5528 2013-04-16 Pedro Alves <palves@redhat.com>
5530 * copyright.py (EXCLUDE_LIST): Add gdb/common/glibc_thread_db.h.
5532 2013-04-16 Pedro Alves <palves@redhat.com>
5534 * common/glibc_thread_db.h: Update from upstream glibc
5535 (git 568035b7874a099087b77f7bba3e36a1173787b0).
5537 2013-04-16 Pedro Alves <palves@redhat.com>
5539 * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: Factor out to ...
5540 * common/glibc_thread_db.h: ... this new file ...
5541 * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: ... and include it.
5543 2013-04-16 Will Newton <will.newton@gmail.com>
5544 Pedro Alves <palves@redhat.com>
5548 * common/gdb_thread_db.h (LIBTHREAD_DB_SO)
5549 (LIBTHREAD_DB_SEARCH_PATH): Move outside of #ifdef
5552 2013-04-16 Pedro Alves <palves@redhat.com>
5553 Eli Zaretskii <eliz@gnu.org>
5555 * NEWS: Mention "set foo unlimited".
5557 2013-04-15 Doug Evans <dje@google.com>
5559 * dwarf2read.c (struct dwo_file): Replace member "cus" with "cu".
5560 (struct create_dwo_cu_data): Renamed from create_dwo_info_table_data.
5561 (create_dwo_cu_reader): Renamed from
5562 create_dwo_debug_info_hash_table_reader.
5563 (create_dwo_cu): Renamed from create_dwo_debug_info_hash_table.
5564 Remove support for multiple CUs in a DWO file.
5565 (open_and_init_dwo_file, lookup_dwo_cutu): Update.
5567 * dwarf2read.c (create_debug_types_hash_table): Use hex_string
5569 (lookup_dwo_unit, create_dwo_debug_info_hash_table_reader): Ditto.
5570 (create_dwo_in_dwp): Ditto.
5572 2013-04-15 Tom Tromey <tromey@redhat.com>
5574 * NEWS: Move recent entries into "since 7.6" section.
5576 2013-04-15 Tom Tromey <tromey@redhat.com>
5580 * break-catch-throw.c (struct exception_catchpoint)
5581 <exception_rx, pattern>: New fields.
5582 (fetch_probe_arguments, dtor_exception_catchpoint)
5583 (check_status_exception_catchpoint)
5584 (print_one_detail_exception_catchpoint): New functions.
5585 (handle_gnu_v3_exceptions): Add "except_rx" argument.
5586 Compile regular expression if needed.
5587 (extract_exception_regexp): New function.
5588 (catch_exception_command_1): Use extract_exception_regexp.
5589 (compute_exception): Use fetch_probe_arguments.
5590 (initialize_throw_catchpoint_ops): Set dtor, print_one_detail,
5591 and check_status fields.
5592 * cp-abi.c (cplus_typename_from_type_info): New function.
5593 * cp-abi.h (cplus_typename_from_type_info): Declare.
5594 (struct cp_abi_ops) <get_typename_from_type_info>: New field.
5595 * gdb_regex.h (compile_rx_or_error): Declare.
5596 * gnu-v3-abi.c (gnuv3_get_typename_from_type_info): Update
5598 (init_gnuv3_ops): Set get_type_from_type_info field.
5599 * probe.c (compile_rx_or_error): Move...
5600 * utils.c (compile_rx_or_error): ... here.
5602 2013-04-15 Tom Tromey <tromey@redhat.com>
5606 * break-catch-throw.c (compute_exception): New function.
5607 (exception_funcs): New global.
5608 (_initialize_break_catch_throw): Create $_exception.
5609 * cp-abi.c (cplus_type_from_type_info): New function.
5610 * cp-abi.h (cplus_type_from_type_info): Declare.
5611 (struct cp_abi_ops) <get_type_from_type_info>: New field.
5612 * gnu-v3-abi.c (gnuv3_get_typename_from_type_info)
5613 (gnuv3_get_type_from_type_info): New functions.
5614 (init_gnuv3_ops): Set get_type_from_type_info ABI field.
5616 2013-04-15 Tom Tromey <tromey@redhat.com>
5618 * break-catch-throw.c (struct exception_names): New.
5619 (exception_functions): Change type.
5620 (re_set_exception_catchpoint): Look for SDT probes.
5622 2013-04-15 Tom Tromey <tromey@redhat.com>
5625 * break-catch-throw.c (exception_functions): New global.
5626 (gnu_v3_exception_catchpoint_ops): Move earlier.
5627 (struct exception_catchpoint): New.
5628 (classify_exception_breakpoint): Rewrite.
5629 (re_set_exception_catchpoint): New function.
5630 (handle_gnu_v3_exceptions): Return void. Use init_catchpoint.
5631 Allocate a struct exception_catchpoint.
5632 (catch_exception_command_1): Update.
5633 (initialize_throw_catchpoint_ops): Set 're_set' method.
5635 2013-04-15 Tom Tromey <tromey@redhat.com>
5637 * Makefile.in (SFILES): Add break-catch-throw.c
5638 (COMMON_OBS): Add break-catch-throw.o.
5639 * break-catch-throw.c: New file.
5640 * breakpoint.c: Move exception-catching code to new file.
5641 (ep_parse_optional_if_clause): No longer static.
5642 * breakpoint.h (ep_parse_optional_if_clause): Declare.
5644 2013-04-15 Tom Tromey <tromey@redhat.com>
5648 * breakpoint.c (watchpoint_exp_is_const): Add OP_TYPEID.
5649 * c-exp.y (TYPEID): New token.
5650 (exp): Add new TYPEID productions.
5651 (ident_tokens): Add "typeid".
5652 * cp-abi.c (cplus_typeid, cplus_typeid_type): New functions.
5653 * cp-abi.h (cplus_typeid, cplus_typeid_type): Declare.
5654 (struct cp_abi_ops) <get_typeid, get_typeid_type>: New fields.
5655 * eval.c (evaluate_subexp_standard) <OP_TYPEID>: New case.
5656 * expprint.c (dump_subexp_body_standard) <OP_TYPEID>: New
5658 * gnu-v3-abi.c (std_type_info_gdbarch_data): New global.
5659 (build_std_type_info_type, gnuv3_get_typeid_type)
5660 (gnuv3_get_typeid): New functions.
5661 (init_gnuv3_ops): Initialize std_type_info_gdbarch_data. Set
5662 new fields on ABI object.
5663 * parse.c (operator_length_standard) <OP_TYPEID>: New case.
5664 * std-operator.def (OP_TYPEID): New.
5666 2013-04-15 Tom Tromey <tromey@redhat.com>
5668 * elfread.c (elf_symtab_read): Install versioned symbol under
5669 unversioned name as well.
5671 2013-04-15 Tom Tromey <tromey@redhat.com>
5674 * c-lang.c (cplus_language_defn): Use gdb_demangle.
5675 * c-typeprint.c (c_type_print_base): Use gdb_demangle.
5676 * cp-support.c (mangled_name_to_comp): Use gdb_demangle.
5677 (gdb_demangle): New function.
5678 * cp-support.h (gdb_demangle): Declare.
5679 * dwarf2read.c (dwarf2_physname, fixup_partial_die)
5680 (dwarf2_name): Use gdb_demangle.
5681 * gdbtypes.c (check_stub_method): Use gdb_demangle.
5682 * gnu-v3-abi.c (gnuv3_rtti_type): Strip @plt and version
5684 (gnuv3_print_method_ptr): Use gdb_demangle.
5685 * jv-lang.c (java_demangle): Use gdb_demangle.
5686 * jv-typeprint.c (java_type_print_base): Use gdb_demangle.
5687 * language.c (unk_lang_demangle): Use gdb_demangle.
5688 * symtab.c (symbol_find_demangled_name)
5689 (demangle_for_lookup): Use gdb_demangle.
5691 2013-04-15 Tom Tromey <tromey@redhat.com>
5695 * breakpoint.c (enum exception_event_kind) <EX_EVENT_RETHROW>:
5697 (classify_exception_breakpoint): New function.
5698 (print_it_exception_catchpoint, print_one_exception_catchpoint)
5699 (print_mention_exception_catchpoint)
5700 (print_recreate_exception_catchpoint, handle_gnu_v3_exceptions)
5701 (catch_exception_command_1): Handle "rethrow" catchpoint.
5702 (catch_rethrow_command): New function.
5703 (_initialize_breakpoint): Add "catch rethrow" command.
5705 2013-04-15 Pierre Muller <muller@sourceware.org>
5707 * contrib/ari/gdb_ari.sh (write_pc rule): Do not consider
5708 set_gdbarch_write_pc as deprecated anymore.
5710 2013-04-15 Joel Brobecker <brobecker@adacore.com>
5712 * spu-tdep.c (spu_write_pc): Add empty line after local variable
5715 2013-04-13 Yao Qi <yao@codesourcery.com>
5717 * ctf.c (_initialize_ctf): Include "completer.h".
5718 Call add_target_with_completer instead of add_target.
5720 2013-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
5722 Fix GDB regression related to PR binutils/14813.
5723 * jit.c (mem_bfd_iovec_close): Return 0 for success.
5724 * minidebug.c (lzma_close): Add return value comment.
5725 * remote.c (remote_bfd_iovec_close): Return 0 for success.
5726 * solib-spu.c (spu_bfd_iovec_close): Likewise.
5727 * spu-linux-nat.c (spu_bfd_iovec_close): Likewise.
5729 2013-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
5731 * config.in: Regenerate.
5733 2013-04-12 Tom Tromey <tromey@redhat.com>
5735 * dwarf2-frame.c (struct comp_unit) <dwarf_frame_buffer>: Now
5737 * dwarf2read.c (struct dwarf2_section_info) <buffer>: Now const.
5738 (struct die_reader_specs) <buffer>: Likewise.
5739 (die_reader_func_ftype): Make 'info_ptr' const.
5740 (struct line_header) <include_dirs, statement_program_start,
5741 statement_program_end>: Now const.
5742 (struct file_entry) <name>: Likewise.
5743 (struct partial_die_info) <sibling>: Likewise.
5744 (struct dwarf_block) <data>: Likewise.
5745 (dwarf2_read_section): Remove cast.
5746 (dwarf2_get_section_info): Make 'bufp' const.
5747 (read_index_from_section): Constify.
5748 (dw2_get_file_names_reader): Make 'info_ptr' const.
5749 (dw2_get_primary_filename_reader): Likewise.
5750 (read_comp_unit_head): Make 'info_ptr' and return type const.
5751 (read_and_check_comp_unit_head, read_and_check_type_unit_head):
5753 (read_abbrev_offset): Constify.
5754 (dwarf2_create_include_psymtab): Make 'name' const.
5755 (create_debug_types_hash_table): Update.
5756 (read_cutu_die_from_dwo): Make 'result_info_ptr' const.
5757 (init_cutu_and_read_dies, init_cutu_and_read_dies_no_follow):
5759 (process_psymtab_comp_unit_reader, build_type_psymtabs_reader)
5760 (load_partial_comp_unit_reader): Make 'info_ptr' const.
5761 (read_comp_units_from_section): Constify.
5762 (peek_abbrev_code, peek_die_abbrev, skip_children, skip_one_die)
5763 (locate_pdi_sibling, load_full_comp_unit_reader): Make 'info_ptr'
5765 (dwarf2_compute_name, setup_type_unit_groups): Constify.
5766 (create_dwo_debug_info_hash_table): Make 'info_ptr' const.
5767 (create_dwp_hash_table, dwarf2_ranges_read)
5768 (dwarf2_record_block_ranges): Constify.
5769 (read_die_and_children, read_die_and_siblings_1)
5770 (read_die_and_siblings): Make 'info_ptr' and 'new_info_ptr'
5772 (read_full_die_1, read_full_die): Make 'info_ptr' const.
5773 (abbrev_table_read_table): Constify.
5774 (load_partial_dies): Make 'info_ptr' const.
5775 (read_partial_die, read_attribute_value, read_attribute): Make
5776 'info_ptr' and return type const.
5777 (read_address, read_initial_length)
5778 (read_checked_initial_length_and_offset, read_offset)
5779 (read_offset_1, read_n_bytes, read_direct_string): Make 'buf'
5781 (read_direct_string): Make 'buf' and return type const.
5782 (read_indirect_string_at_offset, read_indirect_string_from_dwz)
5783 (read_indirect_string): Make return type const.
5784 (read_unsigned_leb128, read_signed_leb128): Make 'buf' const.
5785 (read_addr_index_from_leb128, dwarf2_read_addr_index_reader): Make
5787 (read_str_index): Make return type const.
5788 (add_include_dir): Make 'include_dir' const.
5789 (add_file_name): Make 'name' const.
5790 (dwarf_decode_line_header): Constify.
5791 (psymtab_include_file_name): Make return type const.
5792 (dwarf_decode_lines_1, dwarf_decode_lines): Constify.
5793 (dwarf2_start_subfile): Make 'filename' const.
5794 (dwarf2_const_value_attr): Make 'bytes' const.
5795 (read_signatured_type_reader): Make 'info_ptr' const.
5796 (decode_locdesc): Constify.
5797 (skip_form_bytes): Make 'bytes', 'buffer_end', and return type
5799 (skip_unknown_opcode): Make 'opcode_definitions', 'mac_ptr',
5800 'mac_end', and return type const.
5801 (dwarf_parse_macro_header): Make 'mac_ptr' and return type const.
5802 (dwarf_decode_macro_bytes): Make 'mac_ptr', 'mac_end', and return
5804 (per_cu_header_read_in): Constify.
5805 * symfile.h (dwarf2_get_section_info): Update.
5807 2013-04-12 Tom Tromey <tromey@redhat.com>
5809 * symtab.h (struct general_symbol_info) <value.bytes>: Make const.
5811 2013-04-12 Eli Zaretskii <eliz@gnu.org>
5813 * NEWS: Mention "show configuration", --configuration.
5814 * top.c (print_gdb_configuration): New function, displays the
5815 details about GDB configure-time parameters.
5816 (print_gdb_version): Mention "show configuration".
5817 * cli/cli-cmds.c (show_configuration): New function.
5818 (_initialize_cli_cmds): Add the "show configuration" command.
5819 * main.c (captured_main) <print_configuration>: New static var.
5820 <long_options>: Use it.
5821 If --configuration was given, call print_gdb_configuration.
5823 2013-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5824 Pedro Alves <palves@redhat.com>
5826 * Makefile.in (HAVE_NATIVE_GCORE_TARGET): New.
5827 (generated_files): Add gcore.
5828 (install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or
5829 HAVE_NATIVE_GCORE_HOST.
5831 * NEWS (Changes since GDB 7.6): Mention newly installed gcore.
5832 * config/alpha/alpha-osf3.mh, config/i386/fbsd.mh,
5833 config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh,
5834 config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh,
5835 config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh:
5836 Add HAVE_NATIVE_GCORE_HOST.
5837 * configure: Regenerate.
5838 * configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it.
5839 New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME. New
5840 AC_CONFIG_FILES for gcore.
5841 * configure.tgt: Add gdb_have_gcore to the initial comment. Set
5843 * gdb_gcore.sh: Rename to ...
5844 * gcore.in: ... here. Remove gcore.sh comment. Use GDB_TRANSFORM_NAME
5845 and GCORE_TRANSFORM_NAME substitutions.
5847 Fix parsing tabs in ${gdb_target_obs}.
5848 * configure.tgt (gdb_have_gcore): Replace case with for and if.
5850 2013-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5852 * remote.c (unpush_and_perror): Add output message final dot.
5854 2013-04-11 Yao Qi <yao@codesourcery.com>
5856 * tracepoint.c (tfile_interp_line): Fit parameters line and
5859 2013-04-10 Joel Brobecker <brobecker@adacore.com>
5861 * solib.c (solib_map_sections): Remove code overwriting
5862 SO->SO_NAME with the bfd's filename.
5864 2013-04-10 Pedro Alves <palves@redhat.com>
5866 * cli/cli-decode.c (integer_unlimited_completer): New function.
5867 (add_setshow_integer_cmd, add_setshow_uinteger_cmd)
5868 (add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
5870 * cli/cli-setshow.c: Include "cli/cli-utils.h".
5871 (is_unlimited_literal): New function.
5872 (do_set_command): Handle literal "unlimited" arguments.
5873 * frame.c (_initialize_frame) <set backtrace limit>: Document
5875 * printcmd.c (_initialize_printcmd) <set print
5876 max-symbolic-offset>: Add help text.
5877 * record-full.c (_initialize_record_full) <set record full
5878 insn-number-max>: Likewise.
5879 * record.c (_initialize_record) <set record
5880 instruction-history-size, set record function-call-history-size>:
5882 * ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
5884 * tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
5886 * source.c (_initialize_source) <set listsize>: Add help text.
5887 * utils.c (initialize_utils) <set height, set width>: Likewise.
5888 <set pagination>: Mention "set height unlimited".
5889 * valprint.c (_initialize_valprint) <set print elements, set print
5890 repeats>: Document "unlimited".
5892 2013-04-10 Pedro Alves <palves@redhat.com>
5894 * cli/cli-cmds.c (quit_command): Call query_if_trace_running
5895 instead of disconnect_tracing.
5896 * infcmd.c (detach_command, disconnect_command): Call
5897 query_if_trace_running. Adjust.
5898 * top.c: Include "tracepoint.h".
5899 (quit_target): Delete. Contents moved ...
5900 (quit_force): ... here. Wrap each stage of teardown in
5901 TRY_CATCH. Call disconnect_tracing before detaching.
5903 2013-04-10 Hui Zhu <hui@codesourcery.com>
5904 Yao Qi <yao@codesourcery.com>
5906 * configure.ac: Check libbabeltrace is installed.
5907 * config.in: Regenerate.
5908 * configure: Regenerate.
5909 * Makefile.in (LIBBABELTRACE): New.
5910 (CLIBS): Add LIBBABELTRACE.
5911 * ctf.c: Include "exec.h".
5912 (CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros.
5913 (CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros.
5914 (ctf_save_metadata_header): Define new type aliases in
5916 (ctf_write_header): Define event type "tsv_def" and "tp_def"
5917 in metadata. Start a new faked packet for trace status.
5918 (ctf_write_status): Write trace status to CTF.
5919 (ctf_write_uploaded_tsv): Write TSV to CTF.
5920 (ctf_write_uploaded_tp): Write tracepoint definition to CTF.
5921 (ctf_write_definition_end): End the faked packet.
5923 (ctx, ctf_iter, trace_dirname): New.
5924 (start_pos): New variable.
5925 (ctf_destroy, ctf_open_dir, ctf_open): New.
5926 (SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New
5928 (ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New.
5929 (ctf_fetch_registers, ctf_xfer_partial): New.
5930 (ctf_get_trace_state_variable_value): New.
5931 (ctf_get_tpnum_from_frame_event): New.
5932 (ctf_get_traceframe_address): New.
5933 (ctf_trace_find, ctf_has_stack): New.
5934 (ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New.
5935 (ctf_get_trace_status, ctf_read_status): New.
5936 (_initialize_ctf): New.
5937 * tracepoint.c (get_tracepoint_number): New
5938 (get_uploaded_tsv): Remove 'static'.
5939 (struct traceframe_info, trace_regblock_size): Move it to ...
5940 * tracepoint.h: ... here.
5941 (get_tracepoint_number): Declare it.
5942 (get_uploaded_tsv): Declare it.
5944 * NEWS: Mention new configure option.
5946 2013-04-10 Pedro Alves <palves@redhat.com>
5947 Hui Zhu <hui@codesourcery.com>
5949 * breakpoint.c (dprintf_re_set): New.
5950 (initialize_breakpoint_ops): Set dprintf_breakpoint_ops re_set
5953 2013-04-09 Joel Brobecker <brobecker@adacore.com>
5955 * configure.tgt (gdb_target_obs) <powerpc-*-aix* | rs6000-*-*>:
5956 Remove solib-svr4.o from the list.
5958 2013-04-09 Joel Brobecker <brobecker@adacore.com>
5960 * varobj.c (update_dynamic_varobj_children) [!HAVE_PYTHON]:
5961 Use gdb_assert_not_reached instead of invalid boolean expression.
5963 2013-04-09 Pedro Alves <palves@redhat.com>
5965 * remote.c (unpush_and_perror): New function.
5966 (readchar, remote_serial_write): Use it.
5968 2013-04-09 Markus Metzger <markus.t.metzger@intel.com>
5970 * NEWS: Mention new btrace RSP packets.
5972 2013-04-08 Tom Tromey <tromey@redhat.com>
5974 * symmisc.c (dump_msymbols): Cast fprintf_filtered argument to
5977 2013-04-08 Tom Tromey <tromey@redhat.com>
5979 * maint.c (print_bfd_section_info): Print the section index.
5980 * symmisc.c (dump_msymbols): Print the section index.
5982 2013-04-08 Tom Tromey <tromey@redhat.com>
5985 * blockframe.c (find_pc_partial_function_gnu_ifunc): Check
5986 SYMBOL_SECTION, not SYMBOL_OBJ_SECTION.
5987 * breakpoint.c (resolve_sal_pc): Update.
5988 * elfread.c (elf_gnu_ifunc_record_cache): Update.
5989 * findvar.c (struct minsym_lookup_data) <objfile>: New field.
5990 (minsym_lookup_iterator_cb): Use it.
5991 (default_read_var_value): Update.
5992 * hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline):
5994 * infcmd.c (jump_command): Update.
5995 * linespec.c (minsym_found): Update.
5996 * maint.c (maintenance_translate_address): Update.
5997 * minsyms.c (lookup_minimal_symbol_by_pc_section_1): Update.
5998 (prim_record_minimal_symbol_full): Don't set SYMBOL_OBJ_SECTION.
5999 * parse.c (write_exp_msymbol): Update.
6000 * printcmd.c (address_info): Update.
6001 * psymtab.c (find_pc_sect_psymbol): Update.
6002 (fixup_psymbol_section): Check SYMBOL_SECTION, not
6004 (add_psymbol_to_bcache): Correctly initialize SYMBOL_SECTION.
6005 Don't initialize SYMBOL_OBJ_SECTION.
6006 * spu-tdep.c (spu_catch_start): Update.
6007 * stabsread.c (define_symbol): Don't set SYMBOL_SECTION.
6008 * symmisc.c (dump_msymbols, print_symbol): Update.
6009 * symtab.c (fixup_section): Don't set 'obj_section'. Change
6010 how fallback section is computed.
6011 (fixup_symbol_section): Update.
6012 (find_pc_sect_symtab, find_function_start_sal, skip_prologue_sal):
6014 (allocate_symbol, initialize_symbol, allocate_template_symbol):
6015 Initialize SYMBOL_SECTION.
6016 * symtab.h (struct general_symbol_info) <section>: Update comment.
6017 <obj_section>: Remove.
6018 (SYMBOL_OBJ_SECTION): Add 'objfile' argument. Rewrite.
6019 (SYMBOL_OBJFILE): New macro.
6021 2013-04-08 Tom Tromey <tromey@redhat.com>
6023 * coffread.c (record_minimal_symbol): Update.
6024 * dbxread.c (record_minimal_symbol): Update.
6025 * elfread.c (record_minimal_symbol): Update.
6026 * machoread.c (macho_symtab_add_minsym): Update.
6027 * mdebugread.c (record_minimal_symbol, parse_partial_symbols):
6029 * minsyms.c (prim_record_minimal_symbol): Update.
6030 (prim_record_minimal_symbol_full): Remove 'bfd_section'
6032 (prim_record_minimal_symbol_and_info): Likewise.
6033 * minsyms.h (prim_record_minimal_symbol_full)
6034 (prim_record_minimal_symbol_and_info): Update.
6035 * symtab.c (allocate_symbol, initialize_symbol)
6036 (allocate_template_symbol): Initialize SYMBOL_SECTION.
6037 * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab):
6040 2013-04-08 Tom Tromey <tromey@redhat.com>
6043 * solib-som.c (som_solib_section_offsets): Use BFD section
6044 indices. Set offsets for all sections.
6045 * somread.c (som_symtab_read): Compute BFD section for
6046 symbol. Use prim_record_minimal_symbol_and_info.
6047 (som_symfile_read): Fix comment.
6048 (struct find_section_offset_arg): New.
6049 (find_section_offset, set_section_index): New functions.
6050 (som_symfile_offsets): Use set_section_index to compute
6053 2013-04-08 Tom Tromey <tromey@redhat.com>
6055 * coffread.c (cs_to_section): Use gdb_bfd_section_index.
6056 * elfread.c (record_minimal_symbol, elf_symtab_read): Use
6057 gdb_bfd_section_index.
6058 * gdb_bfd.c (gdb_bfd_section_index, gdb_bfd_count_sections):
6060 * gdb_bfd.h (gdb_bfd_section_index, gdb_bfd_count_sections):
6062 * machoread.c (macho_symtab_add_minsym, macho_symfile_offsets):
6064 * objfiles.c (add_to_objfile_sections_full): New function.
6065 (add_to_objfile_sections): Use it.
6066 (build_section_table): Rewrite.
6067 (objfile_relocate1): Use gdb_bfd_section_index. Update.
6068 * objfiles.h (obj_section_offset): Use gdb_bfd_section_index.
6069 (struct objfile) <sections>: Update comment.
6070 (ALL_OBJFILE_OSECTIONS): Skip sections where the_bfd_section
6072 (ALL_OBJSECTIONS): Use it.
6073 * solib-dsbt.c (dsbt_relocate_main_executable): Update.
6074 * solib-frv.c (frv_relocate_main_executable): Update.
6075 * solib-target.c (solib_target_relocate_section_addresses):
6076 Use gdb_bfd_section_index.
6077 * symfile.c (build_section_addr_info_from_section_table):
6078 Use gdb_bfd_section_index.
6079 (build_section_addr_info_from_bfd, place_section): Likewise.
6080 * symtab.c (fixup_section): Update.
6081 * xcoffread.c (find_targ_sec): Use gdb_bfd_section_index.
6083 2013-04-08 Tom Tromey <tromey@redhat.com>
6085 * minsyms.h (struct bound_minimal_symbol): New.
6086 (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
6087 Remove objfile argument.
6088 (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
6089 Return bound_minimal_symbol.
6090 * minsyms.c (lookup_minimal_symbol_by_pc_1)
6091 (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
6092 Return bound_minimal_symbol.
6093 (in_gnu_ifunc_stub): Update.
6094 (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
6095 Remove 'objfile_p' argument.
6096 (lookup_solib_trampoline_symbol_by_pc): Update.
6097 * ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c,
6098 arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c,
6099 c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c,
6100 glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c,
6101 i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c,
6102 linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c,
6103 mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c,
6104 ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c,
6105 stack.c, symtab.c, tui/tui-disasm.c: Update.
6107 2013-04-08 Tom Tromey <tromey@redhat.com>
6109 * ada-lang.c (ada_decode_symbol): Check and set 'ada_mangled'.
6110 Use symbol's obstack, not an objfile.
6111 * coffread.c (process_coff_symbol): Update.
6112 * dwarf2read.c (fixup_go_packaging, new_symbol_full): Update.
6113 * jv-lang.c (add_class_symbol): Update.
6114 * mdebugread.c (new_symbol): Update.
6115 * minsyms.c (prim_record_minimal_symbol_full)
6116 (terminate_minimal_symbol_table): Update.
6117 * psymtab.c (add_psymbol_to_bcache): Clear entire symbol. Update.
6118 * stabsread.c (define_symbol, read_enum_type): Update.
6119 * symtab.c (symbol_set_demangled_name, symbol_get_demangled_name):
6120 Handle Ada specially.
6121 (symbol_set_language): Add 'obstack' argument.
6122 (symbol_set_names): Update.
6123 (symbol_natural_name, symbol_demangled_name): Always use
6125 * symtab.h (struct general_symbol_info)
6126 <language_specific::obstack>: New field.
6127 <ada_mangled>: New field.
6128 (SYMBOL_SET_LANGUAGE): Add 'obstack' argument.
6129 (symbol_set_language): Update.
6131 2013-04-08 Tom Tromey <tromey@redhat.com>
6133 * symtab.c (symbol_init_cplus_specific, symbol_set_demangled_name):
6134 Take an obstack, not an objfile.
6135 (symbol_set_names): Update.
6136 * symtab.h (symbol_set_demangled_name): Update.
6138 2013-04-08 Tom Tromey <tromey@redhat.com>
6140 * coffread.c (process_coff_symbol, coff_read_enum_type): Call
6142 * dwarf2read.c (fixup_go_packaging): Call allocate_symbol.
6143 (read_func_scope): Call allocate_template_symbol.
6144 (new_symbol_full): Call allocate_symbol.
6145 * jit.c (finalize_symtab): Call allocate_symbol.
6146 * jv-lang.c (add_class_symbol): Call allocate_symbol.
6147 * mdebugread.c (parse_symbol, new_block): Call allocate_symbol.
6148 * stabsread.c (patch_block_stabs, define_symbol, read_enum_type)
6149 (common_block_end): Call allocate_symbol.
6150 * symtab.c (allocate_symbol, initialize_symbol)
6151 (allocate_template_symbol): New functions.
6152 * symtab.c (allocate_symbol, initialize_symbol)
6153 (allocate_template_symbol): Declare.
6154 * xcoffread.c (process_xcoff_symbol): Call initialize_symbol.
6156 2013-04-08 Pedro Alves <palves@redhat.com>
6157 Keith Seitz <keiths@redhat.com>
6159 * breakpoint.c (create_breakpoint): Rename
6160 "parse_condition_and_thread" parameter to "parse_arg". Update
6161 describing comment. If !PARSE_ARG, then error out if ARG is not
6162 the empty string after extracting the location.
6163 * breakpoint.h (create_breakpoint): Rename
6164 "parse_condition_and_thread" parameter to "parse_arg".
6166 2013-04-08 Aleksandar Ristovski <aristovski@qnx.com
6168 * solib-svr4.c (lm_addr_check): Add const qualifier to 'so' arg.
6170 2013-04-07 Yao Qi <yao@codesourcery.com>
6172 * remote.c (remote_trace_find): Change type of parameters 'addr1'
6173 and 'addr2' to CORE_ADDR.
6174 * target.c (update_current_target): Update.
6175 * target.h (struct target_ops) <to_trace_find>: Change parameter
6177 * tracepoint.c (tfind_1): Change type of parameters 'addr1' and
6178 'addr2' to CORE_ADDR.
6179 (tfile_trace_find): Likewise.
6180 (tfile_get_traceframe_address): Change return type to CORE_ADDR.
6181 Change local variable 'addr' to type CORE_ADDR.
6182 * tracepoint.h (tfind_1): Update declaration.
6184 2013-04-06 Eli Zaretskii <eliz@gnu.org>
6186 * windows-nat.c (windows_get_absolute_argv0): Move from here...
6187 * mingw-hdep.c (windows_get_absolute_argv0): ...to here.
6190 * windows-nat.h (windows_get_absolute_argv0): Move prototype from
6192 * main.h (windows_get_absolute_argv0): ...to here.
6194 2013-04-05 Doug Evans <dje@google.com>
6196 * dwarf2read.c (struct dwarf2_per_objfile): Tweak comment.
6197 (read_cutu_die_from_dwo): Add comments.
6198 (read_structure_type): Update comment.
6199 (read_enumeration_type, read_namespace_type): Update comment.
6200 (read_die_type, get_die_type_at_offset, get_die_type): Update comment.
6202 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
6204 Convert man pages to texinfo, new gdbinit.5 texinfo page.
6205 * Makefile.in (gdb.z): Remove.
6206 (install-only): Remove $(man1dir) and gdb.1 installation.
6209 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
6211 Fix compatibility with Linux kernel 3.8.3.
6212 * linux-tdep.c (linux_find_memory_regions_full): Move variable number
6213 to more inner block. Remove parsing of NUMBER from outer block.
6214 Parse NUMBER only if KEYWORD has been identified.
6216 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
6218 Fix variable name shadowing.
6219 * linux-tdep.c (linux_find_memory_regions_full): Rename outer variable
6220 filename to mapsfilename and update its uses.
6222 2013-04-05 Eli Zaretskii <eliz@gnu.org>
6224 * Makefile.in (TAGS): Avoid warning from etags when $GDB_NM_FILE is
6225 empty. See http://sourceware.org/ml/gdb-patches/2012-08/msg00504.html
6226 and http://sourceware.org/ml/gdb-patches/2013-04/msg00055.html for
6227 details of the problem.
6229 2013-04-04 Pedro Alves <palves@redhat.com>
6230 Hui Zhu <hui@codesourcery.com>
6232 * breakpoint.c (validate_commands_for_breakpoint): If validating a
6233 tracepoint, reset its STEP_COUNT and call validate_actionline.
6235 2013-04-03 Doug Evans <dje@google.com>
6237 * dwarf2read.c (read_die_and_siblings_1): Renamed from
6238 read_die_and_siblings.
6239 (read_die_and_siblings): New function.
6240 (read_cutu_die_from_dwo): Dump die if requested.
6241 (read_die_and_children): Call read_full_die_1 and
6242 read_die_and_siblings_1.
6243 (read_full_die): Dump die if requested.
6245 * dwarf2read.c (read_comp_units_from_section): Add debugging printf.
6247 * dwarf2read.c (struct dwo_file): New member comp_dir.
6248 Rename member name to dwo_name. All uses updated.
6249 (hash_dwo_file): Include comp_dir in computation.
6250 (eq_dwo_file): Ditto.
6251 (lookup_dwo_file_slot): New arg comp_dir. All callers updated.
6252 (create_dwo_in_dwp, lookup_dwo_in_dwp, open_and_init_dwo_file): Ditto.
6254 * psymtab.c (read_psymtabs_with_fullname): Don't call
6255 psymtab_to_fullname if the basenames are different.
6257 2013-04-03 Jan Kratochvil <jan.kratochvil@redhat.com>
6259 * NEWS (Changes in GDB 7.6): Update the data-disassemble for "fullname".
6260 New entry about "fullname" presence.
6262 2013-04-03 Pedro Alves <palves@redhat.com>
6264 * NEWS: Mention x86_64/Cygwin as new native configuration.
6266 2013-04-02 Doug Evans <dje@google.com>
6268 * dwarf2read.c (read_structure_type): Fix typo in comment.
6270 2013-04-02 Pedro Alves <palves@redhat.com>
6272 * NEWS: Mention "set/show debug aarch64", "set/show debug
6273 coff-pe-read" and "set/show debug mach-o".
6275 2013-04-02 Pedro Alves <palves@redhat.com>
6277 * NEWS: Mention "set/show remote trace-buffer-size-packet".
6279 2013-04-02 Eli Zaretskii <eliz@gnu.org>
6281 * Makefile.in (HFILES_NO_SRCDIR): Remove call-cmds.h.
6282 gdb_string.h is now in common/.
6284 2013-04-02 Pedro Alves <palves@redhat.com>
6286 * NEWS: Move "set debug notification" and "set trace-buffer-size"
6287 under "New options".
6289 2013-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
6293 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
6295 2013-04-02 Pedro Alves <palves@redhat.com>
6299 * remote.c (send_interrupt_sequence): Use remote_serial_write.
6300 (remote_serial_write): New function.
6301 (putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write.
6303 2013-04-01 Jiong Wang <jiwang@tilera.com>
6305 * NEWS: Mention TILE-Gx in "New native configurations" and
6306 "New targets" sections.
6308 2013-04-01 Doug Evans <dje@google.com>
6310 * dwarf2read.c (lookup_signatured_type_at_offset): Delete.
6311 (process_enumeration_scope): Simplify.
6313 * dwarf2read.c (struct dwarf2_per_cu_data): Move member
6315 (struct signatured_type): ... to here.
6316 (sig_type_ptr): New typedef.
6317 (type_unit_group): Delete member 't.first_cu'. Move member 'tus'
6318 out of union 't'. All uses updated.
6319 (dw2_get_file_names_reader): Assert not called for a type unit.
6320 (dw2_get_file_names): Assert not called for a type unit or type
6322 (build_type_psymtabs_reader): Assert called for a type unit.
6323 (build_type_psymtab_dependencies): Assert called for a type unit group.
6325 * dwarf2read.c (free_dwo_file): Add comment.
6326 (dwarf2_per_objfile_free): Unref dwp bfd.
6328 2013-04-01 Aleksandar Ristovski <aristovski@qnx.com>
6330 * coff-pe-read.c (add_pe_exported_sym): Remove unused 'dll_name_len'.
6331 (add_pe_forwarded_sym): Remove unused 'section', 'dll_name_len'.
6332 (read_pe_exported_syms): Remove unused 'exportix'.
6333 (pe_text_section_offset): Remove unused 'opthdr_ofs', 'num_entries',
6334 'export_rva', 'export_size', 'expptr', 'exp_funcbase', 'expdata',
6335 'erva', 'name_rvas', 'ordinals', 'nexp', 'ordbase', 'dll_name'.
6337 2013-04-01 Aleksandar Ristovski <aristovski@qnx.com>
6339 * breakpoint.c (parse_cond_to_aexpr): Remove unused 'old_chain'.
6340 (print_it_watchpoint): Remove unused 'bl'.
6341 (say_where): Remove unused 'uiout'.
6342 (bpstat_remove_breakpoint_callback): Remove unused 'uiout'.
6343 (bkpt_breakpoint_hit): Remove unused 'b'.
6344 (internal_bkpt_print_it): Remove unused 'uiout'.
6345 * buildsym.c (augment_type_symtab): Remove unused 'i'.
6347 2013-03-31 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
6349 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_float): New function.
6350 (ppc64_sysv_abi_push_dummy_call): Handle complex arguments.
6352 2013-03-29 Doug Evans <dje@google.com>
6354 * dwarf2read.c (open_dwo_file): Renamed from open_dwop_file.
6355 Delete arg is_dwp. All callers updated.
6356 (open_dwp_file): New function.
6357 (open_and_init_dwp_file): Call it.
6358 (get_dwp_file): New function.
6359 (lookup_dwo_cutu): Call it.
6361 * dwarf2read.c (open_and_init_dwp_file): Remove incorrect, and
6362 unnecessary, cleanup.
6364 * dwarf2read.c (lookup_dwo_cutu): Improve complaint text.
6366 * dwarf2read.c (read_cutu_die_from_dwo): New function.
6367 (lookup_dwo_unit): New function.
6368 (init_cutu_and_read_dies): Move DWO handling to new functions.
6370 * dwarf2read.c (struct signatured_type): Tweak comment.
6371 (struct dwo_unit): Tweak comment.
6372 (create_debug_types_hash_table): Tweak comment. Reformat long line.
6373 (create_dwo_debug_info_hash_table): Tweak comment.
6374 (dwarf2_per_cu_offset_and_type): Tweak comment.
6376 * dwarf2read.c (lookup_signatured_type): Remove complaint about
6377 missing .debug_types section.
6379 2013-03-29 Yao Qi <yao@codesourcery.com>
6381 * corelow.c: Include "completer.h".
6382 (_initialize_corelow): Call add_target_with_completer with
6383 argument 'filename_completer'.
6384 * tracepoint.c: Likewise.
6385 * exec.c (_initialize_exec): Likewise.
6386 * target.c (add_target): Rename to ...
6387 (add_target_with_completer): ... this. Call set_cmd_completer
6388 if parameter completer is not NULL.
6390 * target.h: Include "command.h".
6391 (add_target_with_completer): Declare it.
6393 2013-03-28 Joel Brobecker <brobecker@adacore.com>
6395 * coffread.c (is_import_fixup_symbol): New function.
6396 (record_minimal_symbol): Use is_import_fixup_symbol to
6397 detect import fixup symbols, and discard them.
6399 2013-03-28 Doug Evans <dje@google.com>
6401 * dwarf2read.c (create_debug_types_hash_table): Don't allocate the
6402 types hash table until we know we need it.
6404 * dwarf2read.c (create_addrmap_from_index): Complain about bad CU
6407 * dwarf2read.c (dw2_get_file_names): Delete arg "objfile".
6408 All callers updated.
6409 (dw2_print_stats): Print #read CUs too.
6410 (dump_die_shallow): Print signatured types better.
6412 * dwarf2read.c (struct dwarf2_per_cu_data): Rename member
6413 info_or_types_section to section. All uses updated.
6414 (struct dwo_unit): Ditto.
6416 2013-03-28 Pedro Alves <palves@redhat.com>
6418 * NEWS (New options): New section.
6419 (New options): Mention set/show remote trace-status-packet.
6420 * remote.c (PACKET_qTStatus): New enumeration value.
6421 (remote_get_trace_status): Skip sending qTStatus if the packet is
6422 disabled. Use packet_ok.
6423 (_initialize_remote): Register a configuration command for
6426 2013-03-28 Doug Evans <dje@google.com>
6428 * symfile.c (find_separate_debug_file): Add comment.
6429 (terminate_after_last_dir_separator): Tweak comment.
6431 * dwarf2read.c (create_partial_symtab): Add forward decl.
6432 (create_partial_symtab): Move to be closer to other psymtab functions.
6433 (process_psymtab_comp_unit_reader, process_psymtab_comp_unit): Ditto.
6435 * dwarf2read.c (dwarf2_physname): Move declaration to better spot.
6436 (compute_symtab_includes): Remove unnecessary forward declaration.
6437 (die_needs_namespace): Add comment marking group of functions for
6438 dwarf2 name computation.
6440 * typeprint.c (_initialize_typeprint): Improve type help text.
6442 * python/python.c (finish_python_initialization): Provide suggestion
6443 for how to tell gdb to find its python files.
6445 2013-03-28 Pedro Alves <palves@redhat.com>
6449 * source.c (_initialize_source): Change back "set listsize" to an
6452 2013-03-27 Gareth McMullin <gareth@blacksphere.co.nz>
6455 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
6457 2013-03-27 Pedro Alves <palves@redhat.com>
6459 * top.c (history_size): Rename to ...
6460 (history_size_setshow_var): ... this. Add comment.
6461 (show_commands): Use readline's 'history_length' instead of
6462 computing the history length by calling history_get in a loop.
6463 (set_history_size_command): Error out for sizes over INT_MAX.
6464 Restore previous history size on invalid size.
6465 (init_history): If HISTSIZE is negative, leave the history size as
6467 (init_main): Adjust.
6469 2013-03-27 Pedro Alves <palves@redhat.com>
6471 * coff-pe-read.c (_initialize_coff_pe_read): Rename "set debug
6472 coff_pe_read" command to "set debug coff-pe-read".
6474 2013-03-27 Markus Metzger <markus.t.metzger@intel.com>
6476 * record.c (command_size_to_target_size): Fix size comparison.
6477 Change parameter type from pointer to integer to integer.
6480 2013-03-27 Pierre Muller <muller@sourceware.org>
6482 * windows-nat.c (handle_output_debug_string): Avoid typecast
6483 from integer of different size warning.
6485 2013-03-26 Joel Brobecker <brobecker@adacore.com>
6487 * windows-nat.c (handle_output_debug_string): Add empty line
6488 after local block variable definition.
6490 2013-03-26 Pedro Alves <palves@redhat.com>
6492 * ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
6493 (net_open): Make 'polls' local unsigned.
6495 2013-03-26 Pedro Alves <palves@redhat.com>
6497 * remote.c (_initialize_remote): Make "set remoteaddresssize"
6498 a zuinteger command instead of uinteger.
6500 2013-03-26 Pedro Alves <palves@redhat.com>
6502 * record-full.c (record_full_insn_num): Make it unsigned.
6503 (record_full_check_insn_num, record_full_message)
6504 (record_full_registers_change, record_full_xfer_partial): Remove
6505 record_full_insn_max_num check (it's always != 0).
6506 (record_full_info, record_full_restore): Use %u as format string.
6507 (): Use %u as format string.
6508 (set_record_full_insn_max_num): Remove record_full_insn_max_num
6509 check (it's always != 0).
6511 2013-03-26 Pedro Alves <palves@redhat.com>
6513 * dcache.c (_initialize_dcache): Make the "set dcache line-size"
6514 and "set dcache size" commands zuinteger instead of uinteger.
6516 2013-03-26 Pedro Alves <palves@redhat.com>
6518 * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
6519 command zuinteger instead of uinteger.
6521 2013-03-26 Pedro Alves <palves@redhat.com>
6523 * coff-pe-read.c (_initialize_coff_pe_read): Make the command
6524 zuinteger instead of uinteger.
6526 2013-03-26 Pedro Alves <palves@redhat.com>
6528 * record.c (record_insn_history_size_setshow_var)
6529 (record_call_history_size_setshow_var): New globals.
6530 (command_size_to_target_size): New function.
6531 (cmd_record_insn_history, cmd_record_call_history): Use
6532 command_size_to_target_size instead of cast.
6533 (validate_history_size, set_record_insn_history_size)
6534 (set_record_call_history_size): New functions.
6535 (_initialize_record): Install set_record_insn_history_size and
6536 set_record_call_history_size as "set" hooks of "set record
6537 instruction-history-size" and "set record
6538 function-call-history-size".
6540 2013-03-26 Pedro Alves <palves@redhat.com>
6542 * top.c (gdb_rl_operate_and_get_next): Replace max_input_history
6543 use with history_max_entries use. Remove FIXME note.
6545 2013-03-26 Markus Metzger <markus.t.metzger@intel.com>
6547 * record-btrace.c (record_btrace_close): Call
6548 record_btrace_auto_disable.
6550 2013-03-25 Joel Brobecker <brobecker@adacore.com>
6552 * rs6000-nat.c (fixup_breakpoints): Delete declaration.
6554 2013-03-25 Doug Evans <dje@google.com>
6556 * contrib/cc-with-tweaks.sh: Check exit code of dwp.
6558 2013-03-25 Tom Tromey <tromey@redhat.com>
6561 * c-exp.y (exp): Add new productions for destructors after '.' and
6563 (write_destructor_name): New function.
6565 2013-03-25 Tom Tromey <tromey@redhat.com>
6568 * opencl-lang.c (evaluate_subexp_opencl) <STRUCTOP_STRUCT>: Use
6569 value_struct_elt, not lookup_struct_elt_type.
6570 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
6571 STRUCTOP_PTR>: Use value_struct_elt, not lookup_struct_elt_type.
6572 * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment.
6574 2013-03-25 Yao Qi <yao@codesourcery.com>
6576 * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir'
6577 instead of '_mkdir'.
6579 2013-03-23 Eli Zaretskii <eliz@gnu.org>
6581 * windows-nat.c (windows_get_absolute_argv0): New function.
6582 * windows-nat.h: Add its prototype.
6584 * main.c (get_init_files): Use filename_ncmp instead of strncmp.
6585 Use IS_DIR_SEPARATOR instead of looking for a character inside
6586 SLASH_STRING. Include filenames.h.
6587 (captured_main) [__MINGW32__]: Make argv[0] absolute, so that
6588 relocate_gdb_directory works when passed gdb_program_name.
6589 Include windows-nat.h.
6591 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6593 * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
6594 * remote.c (trace_error): Remove the special handling of '2'.
6595 (readchar) <SERIAL_EOF>
6596 (readchar) <SERIAL_ERROR>
6597 (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
6598 (remote_get_trace_status): Call throw_exception if EX is
6600 * utils.c (perror_with_name): Rename to ...
6601 (throw_perror_with_name): ... here. New parameter errcode, describe it
6602 in the function comment.
6603 (perror_with_name): New function wrapper.
6604 * utils.h (enum errors): New stub declaration.
6605 (throw_perror_with_name): New declaration.
6607 2013-03-22 Pedro Alves <palves@redhat.com>
6608 Yao Qi <yao@codesourcery.com>
6609 Mark Kettenis <kettenis@gnu.org>
6611 * cli/cli-setshow.c (do_set_command) <var_uinteger>:
6612 Don't let the user set the value to UINT_MAX directly.
6613 <var_integer>: Don't let the user set the value to INT_MAX
6616 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6618 * remote.c (remote_unpush_target): New function.
6619 (remote_open_1): Remove two pop_target calls, update one comment, add
6620 comment to target_preopen call. Replace pop_target call by
6621 remote_unpush_target call.
6622 (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
6623 pop_target calls by remote_unpush_target calls.
6625 2013-03-22 Pedro Alves <palves@redhat.com>
6627 * linux-nat.c (linux_child_follow_fork): Don't call
6628 linux_enable_event_reporting.
6629 (linux_handle_extended_wait): Don't call
6630 linux_enable_event_reporting.
6632 2013-03-22 Pedro Alves <palves@redhat.com>
6634 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
6635 use it to rewrite the trampoline buffers with type gdb_byte[], and
6636 undefine the macro. Remove char* cast.
6638 2013-03-21 Doug Evans <dje@google.com>
6640 New commands "mt set per-command {space,time,symtab} {on,off}".
6642 * event-top.c: #include "maint.h".
6643 * main.c: #include "maint.h".
6644 * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
6645 timeval-utils.h, maint.h, cli/cli-setshow.h.
6646 (per_command_time, per_command_space): New static globals.
6647 (per_command_symtab): New static global.
6648 (per_command_setlist, per_command_showlist): New static globals.
6649 (struct cmd_stats): Move here from utils.c.
6650 (set_per_command_time): Renamed from set_display_time in utils.c
6651 and moved here. All callers updated.
6652 (set_per_command_space): Renamed from set_display_space in utils.c
6653 and moved here. All callers updated.
6654 (count_symtabs_and_blocks): New function.
6655 (report_command_stats): Moved here from utils.c. Add support for
6656 printing symtab stats. Only print data if enabled before command
6658 (make_command_stats_cleanup): Ditto.
6659 (sert_per_command_cmd, show_per_command_cmd): New functions.
6660 (_initialize_maint_cmds): Add new commands
6661 mt set per-command {space,time,symtab} {on,off}.
6662 * maint.h: New file.
6663 * top.c: #include "maint.h".
6664 * utils.c (reset_prompt_for_continue_wait_time): New function.
6665 (get_prompt_for_continue_wait_time): New function.
6666 * utils.h (reset_prompt_for_continue_wait_time): Declare
6667 (get_prompt_for_continue_wait_time): Declare.
6668 (make_command_stats_cleanup): Moved to maint.h.
6669 (set_display_time, set_display_space): Moved to maint.h and renamed
6670 to set_per_command_time, set_per_command_space.
6671 * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
6672 parse_binary_operation and made non-static. Don't call error,
6673 just return an error marker. All callers updated.
6674 * cli/cli-setshow.h (parse_cli_boolean_value): Declare.
6676 2013-03-21 Tom Tromey <tromey@redhat.com>
6678 * symfile.c (alloc_section_addr_info): Update header. Don't set
6679 'num_sections' field.
6680 (build_section_addr_info_from_section_table): Set 'num_sections'.
6681 (build_section_addr_info_from_bfd): Likewise.
6682 (build_section_addr_info_from_objfile): Remove dead loop
6684 (free_section_addr_info): Unconditionally call xfree.
6685 (relative_addr_info_to_section_offsets, addrs_section_sort)
6686 (addr_info_make_relative, syms_from_objfile_1): Remove dead loop
6688 (syms_from_objfile_1): Remove dead 'if' condition. Check
6690 (add_symbol_file_command): Set 'num_sections'.
6691 * symfile-mem.c (symbol_file_add_from_memory): Set
6693 * somread.c (som_symfile_offsets): Remove dead loop condition.
6694 * machoread.c (macho_symfile_offsets): Remove dead 'if'.
6695 * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'.
6697 2013-03-21 Tom Tromey <tromey@redhat.com>
6699 * tracepoint.h (decode_agent_options): Add 'trace_string'
6701 * tracepoint.c (decode_agent_options): Add 'trace_string'
6703 (validate_actionline): Update.
6704 (collect_symbol): Add 'trace_string' argument.
6705 (struct add_local_symbols_data) <trace_string>: New field.
6706 (do_collect_symbol): Update.
6707 (add_local_symbols): Add 'trace_string' argument.
6708 (encode_actions_1): Update.
6709 (trace_dump_actions): Update.
6710 * dwarf2loc.c (access_memory): Update.
6711 * ax.h (struct agent_expr) <tracing, trace_string>: New fields.
6712 * ax-general.c (new_agent_expr): Update.
6713 * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
6714 (gen_trace_for_return_address): Add argument.
6715 (trace_kludge, trace_string_kludge): Remove.
6716 * ax-gdb.c (trace_kludge, trace_string_kludge): Remove.
6717 (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update.
6718 (gen_trace_for_var): Add 'trace_string' argument.
6719 (gen_trace_for_expr, gen_trace_for_return_address): Likewise.
6720 (gen_printf, agent_eval_command_one): Update.
6722 2013-03-21 Tom Tromey <tromey@redhat.com>
6725 * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
6726 Handle FILENAME token.
6728 2013-03-21 Tom Tromey <tromey@redhat.com>
6730 * c-exp.y (YYPRINT): Define.
6731 (c_print_token): New function.
6733 2013-03-21 Tom Tromey <tromey@redhat.com>
6735 * c-exp.y (%union) <sym, ivar, ivec>: Remove.
6737 2013-03-21 Yao Qi <yao@codesourcery.com>
6739 * ctf.c: Include "gdb_stat.h".
6740 [USE_WIN32API]: New macro 'mkdir'.
6741 (ctf_start): Use permission bits macros if they are defined.
6743 2013-03-20 Keith Seitz <keiths@redhat.com>
6745 * breakpoint.h (struct breakpoint): Add comment to
6746 extra_string indicating that this member is mallod'd.
6747 * breakpoint.c (base_breakpoint_dtor): Free extra_string.
6749 2013-03-20 Pedro Alves <palves@redhat.com>
6753 * cli/cli-setshow.c (do_set_command)
6754 <var_uinteger, var_zuinteger>: Use LONGEST for variable holding
6755 the result of parsing the command argument. Throw error if the
6756 value is greater than UINT_MAX. Print the invalid value with
6758 <var_integer, var_zinteger>: Use LONGEST for variable holding the
6759 result of parsing the command argument. Throw error if the value
6760 is greater than INT_MAX, not greater or equal. Also throw error
6761 if the value is less than INT_MIN. Print the invalid value with
6763 <var_zuinteger_unlimited>: Throw error if the value is greater
6764 than INT_MAX, not greater or equal.
6765 (do_show_command) <var_integer, var_zinteger,
6766 var_zuinteger_unlimited>: Use %d for printing int, not %u.
6768 2013-03-20 Tom Tromey <tromey@redhat.com>
6770 * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops,
6772 * dwarf2read.c (read_func_scope): Remove old FIXME.
6773 * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
6775 * findvar.c (symbol_read_needs_frame, default_read_var_value):
6776 Unconditionally call via computed ops, if possible.
6777 * printcmd.c (address_info): Unconditionally call via computed ops,
6779 * stack.c (read_frame_arg): Unconditionally call via computed ops,
6781 * symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
6782 * tracepoint.c (scope_info): Unconditionally call via computed ops,
6785 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
6786 Tom Tromey <tromey@redhat.com>
6789 * coffread.c (coff_register_index): New global.
6790 (process_coff_symbol, coff_read_enum_type): Set
6791 SYMBOL_ACLASS_INDEX.
6792 (_initialize_coffread): Initialize new global.
6793 * dwarf2loc.c (locexpr_find_frame_base_location)
6794 (dwarf2_block_frame_base_locexpr_funcs)
6795 (loclist_find_frame_base_location)
6796 (dwarf2_block_frame_base_loclist_funcs): New.
6797 (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error.
6798 (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist.
6799 * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs)
6800 (dwarf2_block_frame_base_loclist_funcs): New.
6801 * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index)
6802 (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New
6804 (read_func_scope): Update.
6805 (fixup_go_packaging, mark_common_block_symbol_computed)
6806 (var_decode_location, new_symbol_full, dwarf2_const_value):
6807 Set SYMBOL_ACLASS_INDEX.
6808 (dwarf2_symbol_mark_computed): Likewise. Add 'is_block' argument.
6809 (_initialize_dwarf2_read): Initialize new globals.
6810 * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX.
6811 * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX.
6812 * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New
6814 (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX.
6815 (_initialize_mdebugread): Initialize new globals.
6816 * psympriv.h (struct partial_symbol) <aclass>: Update comment.
6817 * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX.
6818 (stab_register_index, stab_regparm_index): New globals.
6819 (define_symbol, read_enum_type, common_block_end): Set
6820 SYMBOL_ACLASS_INDEX.
6821 (_initialize_stabsread): Initialize new globals.
6822 * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New
6824 (MAX_SYMBOL_IMPLS): New define.
6825 (register_symbol_computed_impl, register_symbol_block_impl)
6826 (register_symbol_register_impl)
6827 (initialize_ordinary_address_classes): New functions.
6828 (_initialize_symtab): Call initialize_ordinary_address_classes.
6829 * symtab.h (enum address_class) <LOC_FINAL_VALUE>: New constant.
6830 (struct symbol_impl): New.
6831 (SYMBOL_ACLASS_BITS): New define.
6832 (struct symbol) <aclass, ops>: Remove fields.
6833 <aclass_index>: New field.
6834 (symbol_impls): Declare.
6835 (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine.
6836 (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines.
6837 (register_symbol_computed_impl, register_symbol_block_impl)
6838 (register_symbol_register_impl): Declare.
6839 (struct symbol_computed_ops): Add location_has_loclist.
6840 (struct symbol_block_ops): New.
6841 (SYMBOL_BLOCK_OPS): New.
6842 * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX.
6844 2013-03-20 Tom Tromey <tromey@redhat.com>
6846 * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
6847 (print_partial_symbols, recursively_search_psymtabs): Use
6850 2013-03-20 Pierre Muller <muller@sourceware.org>
6852 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
6853 addtion, subtraction, multiplication and division binary operator.
6855 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
6858 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
6859 * bsd-kvm.c (bsd_kvm_close): Likewise.
6860 * bsd-uthread.c (bsd_uthread_close): Likewise.
6861 * corelow.c (core_close): Likewise.
6862 (core_close_cleanup): Remove parameter quitting from a caller.
6863 * event-top.c (async_disconnect): Likewise.
6864 * exec.c (exec_close_1): Remove parameter quitting.
6865 * go32-nat.c (go32_close): Likewise.
6866 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
6867 parameter quitting from a caller.
6868 * mips-linux-nat.c (super_close): Remove parameter quitting from the
6870 (mips_linux_close): Remove parameter quitting. Remove parameter
6871 quitting from a caller.
6872 * monitor.c (monitor_close): Remove parameter quitting.
6873 * monitor.h (monitor_close): Likewise.
6874 * record-btrace.c (record_btrace_close): Likewise.
6875 * record-full.c (record_full_close): Likewise.
6876 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
6877 it also from fprintf_unfiltered.
6878 * remote-mips.c (mips_close): Remove parameter quitting.
6879 (mips_detach): Remove parameter quitting from a caller.
6880 * remote-sim.c (gdbsim_close): Remove parameter quitting.
6881 (gdbsim_close): Remove duplicate function comment. Remove parameter
6882 quitting and remove it also from printf_filtered.
6883 * remote.c (remote_close): Remove parameter quitting.
6884 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
6885 * target.c (update_current_target): Remove parameter int from to_close
6887 (push_target, unpush_target, pop_target): Remove parameter quitting from
6889 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
6890 Remove parameter quitting from a caller.
6891 (target_preopen): Remove parameter quitting from a caller.
6892 (target_close): Remove parameter quitting. Remove parameter quitting
6893 from a caller two times. Remove parameter quitting also from
6895 * target.h (struct target_ops): Remove parameter quitting and as int
6896 from fields to_xclose and to_close.
6897 (extern struct target_ops current_target):
6898 (target_close, pop_all_targets): Remove parameter quitting. Update the
6900 (pop_all_targets_above): Remove parameter quitting.
6901 * top.c (quit_target): Remove parameter quitting from a caller.
6902 * tracepoint.c (tfile_close): Remove parameter quitting.
6903 * windows-nat.c (windows_close): Remove parameter quitting.
6905 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
6907 * windows-nat.c (handle_output_debug_string): Replace call
6908 to string_to_core_addr with call to strtoull.
6910 2013-03-20 Yao Qi <yao@codesourcery.com>
6912 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
6913 and write it to CTF metadata.
6915 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
6917 * windows-nat.c (handle_output_debug_string): Change type of n to
6918 SIZE_T to avoid crash on 64 bit systems.
6920 2013-03-17 Eli Zaretskii <eliz@gnu.org>
6922 * python/python-internal.h (HAVE_SNPRINTF)
6923 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
6924 about redefinition of snprintf by pyerrors.h.
6926 2013-03-15 Steve Ellcey <sellcey@mips.com>
6928 * remote-sim.c (sim_command_completer): Make char arguments const.
6930 2013-03-15 Tom Tromey <tromey@redhat.com>
6933 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
6935 2013-03-14 Tom Tromey <tromey@redhat.com>
6937 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
6939 (get_file_crc): Move from symfile.c.
6940 (gdb_bfd_crc): New function.
6941 * gdb_bfd.h (gdb_bfd_crc): Declare.
6942 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
6943 * symfile.c (get_file_crc): Move to gdb_bfd.c.
6944 (separate_debug_file_exists): Use gdb_bfd_crc.
6946 2013-03-14 Tom Tromey <tromey@redhat.com>
6948 * symfile.c (get_debug_link_info): Remove.
6949 (find_separate_debug_file_by_debuglink): Use
6950 bfd_get_debug_link_info.
6952 2013-03-14 Tom Tromey <tromey@redhat.com>
6954 * symtab.c (error_in_psymtab_expansion): New function.
6955 (lookup_symbol_aux_quick)
6956 (basic_lookup_transparent_type_quick): Remove "last resort"
6957 code. Use error_in_psymtab_expansion.
6959 2013-03-14 Doug Evans <dje@google.com>
6960 Jan Kratochvil <jan.kratochvil@redhat.com>
6962 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
6963 any successful compare_filenames_for_search or FILENAME_CMP.
6964 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
6965 * symtab.c (iterate_over_some_symtabs): Likewise.
6967 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
6969 * source.c (print_source_lines_base): Make a local copy of
6972 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
6973 Jan Kratochvil <jan.kratochvil@redhat.com>
6975 * source.c (print_source_lines_base): Suppress "file" for TUI.
6977 2013-03-14 Keith Seitz <keiths@redhat.com>
6978 Alan Matsuoka <alanm@redhat.com>
6982 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
6984 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
6987 2013-03-14 Yao Qi <yao@codesourcery.com>
6989 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
6990 status to tfile if trace is stopped by command 'tstop'.
6992 2013-03-14 Yao Qi <yao@codesourcery.com>
6994 * tracepoint.c (tfile_write_status): Write trace notes and user
6995 name into tfile if they are not NULL.
6997 2013-03-14 Hui Zhu <hui@codesourcery.com>
6998 Yao Qi <yao@codesourcery.com>
7000 * Makefile.in (REMOTE_OBS): Add ctf.o.
7001 (SFILES): Add ctf.c.
7002 (HFILES_NO_SRCDIR): Add ctf.h.
7003 * ctf.c, ctf.h: New files.
7004 * tracepoint.c: Include 'ctf.h'.
7005 (collect_pseudocommand): Remove static.
7006 (trace_save_command): Parse option "-ctf".
7007 Produce different trace file writers per option.
7008 Adjust output message.
7009 (trace_save_tfile, trace_save_ctf): New.
7010 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
7011 * mi/mi-main.c: Include 'ctf.h'.
7012 (mi_cmd_trace_save): Handle option '-ctf'. Call either
7013 trace_save_tfile or trace_save_ctf.
7014 * NEWS: Mention these changes.
7016 2013-03-14 Yao Qi <yao@codesourcery.com>
7018 * tracepoint.c (trace_file_writer_xfree): New.
7019 (struct tfile_writer_data): New.
7020 (tfile_dtor, tfile_can_target_save, tfile_start): New.
7021 (tfile_write_header, tfile_write_regblock_type): New.
7022 (tfile_write_status, tfile_write_uploaded_tsv): New.
7023 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
7024 (tfile_write_raw_data, (tfile_end): New.
7025 (tfile_write_ops): New global variable.
7026 (TRACE_WRITE_R_BLOCK): New macro.
7027 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
7028 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
7029 (TRACE_WRITE_V_BLOCK): New macro.
7030 (trace_save): Add extra one parameter WRITER. Make it static.
7031 Use WRITER to writer trace.
7032 (tfile_trace_file_writer_new): New.
7033 (trace_save_command): Caller update.
7034 (trace_save_tfile): Write trace data in TFILE format.
7035 * tracepoint.h (struct trace_frame_write_ops): New.
7036 (struct trace_file_write_ops): New.
7037 (struct trace_file_writer): New.
7038 (trace_save): Remove its declaration.
7039 (trace_save_tfile): Declare it.
7040 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
7041 instead of trace_save.
7043 2013-03-13 Pedro Alves <palves@redhat.com>
7045 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
7047 2013-03-13 Pedro Alves <palves@redhat.com>
7049 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
7051 * demangle.c (current_demangling_style_string): Make it const.
7052 (set_demangling_command): Assert the demangling style is known.
7053 Remove all handling of unknown styles. Set
7054 'current_demangling_style_string' to an element of the
7055 demangling_style_names array.
7056 (set_demangling_style): Delete.
7057 (_initialize_demangler): Set current_demangling_style_string to the
7058 element of the demangling_style_names array that corresponds to
7059 the default demangling style. Remove FIXME note. Don't call
7060 set_demangling_style.
7061 * gdb-demangle.h (set_demangling_style): Remove declaration.
7063 2013-03-13 Pedro Alves <palves@redhat.com>
7065 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
7067 (ada_make_symbol_completion_list): Make "text0" parameter const.
7068 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
7069 * breakpoint.c (condition_completer): Make "text" and "word"
7070 parameters const. Adjust.
7071 (check_tracepoint_command): Adjust to validate_actionline
7073 (catch_syscall_completer): Make "text" and "word" parameters
7075 * cli/cli-cmds.c (show_user): Make "comname" local const.
7076 (valid_command_p): Make "command" parameter const.
7077 (alias_command): Make "alias_prefix" and "command_prefix" locals
7079 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
7080 (add_alias_cmd): Make "name" and "oldname" parameters const.
7081 Adjust. No longer make copy of OLDNAME.
7082 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
7083 (add_setshow_cmd_full, add_setshow_enum_cmd)
7084 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
7085 (add_setshow_filename_cmd, add_setshow_string_cmd)
7086 (add_setshow_string_noescape_cmd)
7087 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
7088 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
7089 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
7090 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
7091 Make "name" parameter const.
7092 (help_cmd): Rename "command" parameter to "arg". New const local
7094 (find_cmd): Make "command" parameter const.
7095 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
7096 deprecated_cmd_warning prototype change.
7097 (undef_cmd_error): Make "cmdtype" parameter const.
7098 (lookup_cmd): Make "line" parameter const.
7099 (deprecated_cmd_warning): Change type of "text" parameter to
7100 pointer to const char, from pointer to pointer to char. Adjust.
7101 (lookup_cmd_composition): Make "text" parameter const.
7102 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
7104 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
7106 * cli/cli-script.c (validate_comname): Make "tem" local const.
7107 (define_command): New const local "tem_c". Use it in calls to
7109 (document_command): Make "tem" and "comfull" locals const.
7110 (show_user_1): Make "prefix" and "name" parameters const.
7111 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
7113 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
7114 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
7115 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
7116 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
7117 (complete_on_enum, add_setshow_enum_cmd)
7118 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
7119 (add_setshow_filename_cmd, add_setshow_string_cmd)
7120 (add_setshow_string_noescape_cmd)
7121 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
7122 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
7123 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
7124 Change prototypes, constifying strings.
7125 * completer.c (noop_completer, filename_completer): Make "text"
7126 and "prefix" parameters const.
7127 (location_completer, expression_completer)
7128 (complete_line_internal): Make "text" and "prefix" parameters
7130 (command_completer, signal_completer): Make "text" and "prefix"
7132 * completer.h (noop_completer, filename_completer)
7133 (expression_completer, location_completer, command_completer)
7134 (signal_completer): Change prototypes.
7135 * corefile.c (complete_set_gnutarget): Make "text" and "word"
7137 * cp-abi.c (cp_abi_completer): Likewise.
7138 * expression.h (parse_expression_for_completion): Change
7140 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
7142 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
7143 * infrun.c (handle_completer): Make "text" and "word" parameters
7145 * interps.c (interpreter_completer): Make "text" and "word"
7147 * language.h (struct language_defn)
7148 <la_make_symbol_completion_list>: Make "text" and "word"
7150 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
7151 (parse_exp_in_context): Rename to ...
7152 (parse_exp_in_context_1): ... this.
7153 (parse_exp_in_context): Reimplement, with const hack from
7155 (parse_expression_for_completion): Make "string" parameter const.
7156 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
7157 to pointer to const char. Adjust.
7158 (print_command_1): Make "exp" parameter const.
7159 (output_command): Rename to ...
7160 (output_command_const): ... this. Make "exp" parameter const.
7161 (output_command): Reimplement.
7162 (x_command): Adjust.
7163 (display_command): Rename "exp" parameter to "arg". New "exp"
7164 local, const version of "arg".
7165 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
7166 "cmd_name" local const.
7167 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
7169 (cmdpy_completer): Make "text" and "word" parameters const.
7170 (gdbpy_parse_command_name): Make "prefix_text2" local const.
7171 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
7173 * remote.c (_initialize_remote): Make "cmd_name" local const.
7174 * symtab.c (language_search_unquoted_string): Make "text" and "p"
7175 parameters const. Adjust.
7176 (completion_list_add_fields): Make "sym_text", "text" and "word"
7178 (struct add_name_data) <sym_text, text, word>: Make fields const.
7179 (default_make_symbol_completion_list_break_on): Make "text" and
7180 "word" parameters const. Adjust locals.
7181 (default_make_symbol_completion_list)
7182 (make_symbol_completion_list, make_symbol_completion_type)
7183 (make_symbol_completion_list_fn): Make "text" and "word"
7185 (make_file_symbol_completion_list): Make "text", "word" and
7186 "srcfile" parameters const. Adjust locals.
7187 (add_filename_to_list): Make "text" and "word" parameters const.
7188 (struct add_partial_filename_data) <text, word>: Make fields
7190 (make_source_files_completion_list): Make "text" and "word"
7192 * symtab.h (default_make_symbol_completion_list_break_on)
7193 (default_make_symbol_completion_list, make_symbol_completion_list)
7194 (make_symbol_completion_type enum type_code)
7195 (make_symbol_completion_list_fn make_file_symbol_completion_list)
7196 (make_source_files_completion_list): Change prototype.
7197 * top.c (execute_command): Adjust to pass pointer to pointer to
7198 const char to lookup_cmd, and to deprecated_cmd_warning prototype
7200 (set_verbose): Make "cmdname" local const.
7201 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
7203 (validate_actionline): Make "line" parameter a pointer to const
7205 (encode_actions_1): Make "action_exp" local const, and adjust.
7206 (encode_actions): Adjust.
7207 (replace_comma): Delete.
7208 (trace_dump_actions): Make "action_exp" and "next_comma" locals
7209 const, and adjust. Don't frob the action string while splitting
7210 it at commas. Instead, make a copy of each split substring in
7212 (trace_dump_command): Adjust to validate_actionline prototype
7214 * tracepoint.h (decode_agent_options, decode_agent_options)
7215 (encode_actions, validate_actionline): Change prototypes.
7216 * valprint.h (output_command): Delete declaration.
7217 (output_command_const): Declare.
7218 * value.c (function_destroyer): Cast const away in xfree call.
7220 2013-03-13 Pedro Alves <palves@redhat.com>
7222 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
7223 rather than casting 'const char * const *' to 'const char **'.
7224 * ada-lex.l (processInt): Make "trailer" local const. Remove
7225 'const char **' cast.
7226 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
7227 locals, and use those as strtol output pointer, instead than doing
7228 invalid casts to from 'const char **' to 'char **'.
7229 (_initialize_demangle): Remove cast.
7230 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
7231 locals, and use those as strtol output pointer, instead than doing
7232 invalid casts to from 'const char **' to 'char **'.
7233 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
7235 * stap-probe.c (stap_parse_register_operand)
7236 (stap_parse_single_operand): Likewise.
7238 2013-03-13 Yao Qi <yao@codesourcery.com>
7240 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
7241 the last matched 'V' blcok in trace frame.
7243 2013-03-12 Joel Brobecker <brobecker@adacore.com>
7245 * NEWS: Create a new section for the next release branch.
7246 Rename the section of the current branch, now that it has
7249 2013-03-12 Joel Brobecker <brobecker@adacore.com>
7251 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
7252 * version.in: Bump version to 7.6.50.20130312-cvs.
7254 2013-03-12 Keith Seitz <keiths@redhat.com>
7256 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
7257 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
7258 Remove temporary copy of input string.
7259 (mi_execute_command_wrapper): Make "cmd" const.
7260 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
7261 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
7263 (mi_parse): Make "cmd" const.
7265 * mi/mi-parse.h (mi_parse): Make "cmd" const.
7267 2013-03-12 Keith Seitz <keiths@redhat.com>
7269 * ada-lang.c (ada_read_renaming_var_value): Pass const
7270 pointer to expression string to parse_exp_1.
7271 (create_excep_cond_exprs): Likewise.
7272 * ax-gdb.c (agent_eval_command_one): Likewise.
7273 (maint_agent_printf_command): Likewise.
7274 Constify much of the string handling/parsing.
7275 * breakpoint.c (set_breakpoint_condition): Pass const
7276 pointer to expression string to parse_exp_1.
7277 (update_watchpoint): Likewise.
7278 (parse_cmd_to_aexpr): Constify string handling.
7279 Pass const pointer to parse_exp_1.
7280 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
7281 (find_condition_and_thread): Likewise.
7283 (watch_command_1): Make "arg" const.
7284 Constify string handling.
7285 Copy the expression string instead of changing the input
7287 (update_breakpoint_location): Pass const pointer to
7289 * eval.c (parse_and_eval_address): Make "exp" const.
7290 (parse_to_comma_and_eval): Make "expp" const.
7291 (parse_and_eval): Make "exp" const.
7292 * expression.h (parse_expression): Make argument const.
7293 (parse_exp_1): Make first argument const.
7294 * findcmd.c (parse_find_args): Treat "args" as const.
7295 * linespec.c (parse_linespec): Pass const pointer to
7296 linespec_expression_to_pc.
7297 (linespec_expression_to_pc): Make "exp_ptr" const.
7298 * parse.c (parse_exp_1): Make "stringptr" const.
7299 Make a copy of the expression to pass to parse_exp_in_context until
7300 this whole interface can be constified.
7301 (parse_expression): Make "string" const.
7302 * printcmd.c (ui_printf): Treat "arg" as const.
7303 Handle const strings.
7304 * tracepoint.c (validate_actionline): Pass const pointer to
7305 all calls to parse_exp_1.
7306 (encode_actions_1): Likewise.
7307 * value.h (parse_to_comma_and_eval): Make argument const.
7308 (parse_and_eval_address): Likewise.
7309 (parse_and_eval): Likewise.
7310 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
7311 (varobj_set_value): Likewise.
7312 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
7313 constify string handling.
7314 Pass const pointers to parse_and_eval_address and
7315 parse_to_comman_and_eval.
7316 * cli/cli-utils.c (skip_to_space): Rename to ...
7317 (skip_to_space_const): ... this. Handle const strings.
7318 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
7319 skip_to_space_const.
7320 (skip_to_space_const): Declare.
7321 * common/format.c (parse_format_string): Make "arg" const.
7322 Handle const strings.
7323 * common/format.h (parse_format_string): Make "arg" const.
7324 * gdbserver/ax.c (ax_printf): Make "format" const.
7325 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
7326 of the expression string.
7328 2013-03-12 Hui Zhu <hui@codesourcery.com>
7330 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
7332 2013-03-12 Yao Qi <yao@codesourcery.com>
7333 Hui Zhu <hui@codesourcery.com>
7335 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
7336 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
7339 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
7341 * ada-lex.l (rules): Only recognize 'thread' as a
7342 delimiter when followed by numerals, as for c-exp.y.
7343 Use new rewind_to_char function to rewind the input for
7344 expression-delimiting tokens.
7345 (rewind_to_char): New function.
7347 2013-03-11 Pedro Alves <palves@redhat.com>
7348 Jan Kratochvil <jan.kratochvil@redhat.com>
7350 * configure: Regenerate.
7351 * configure.ac (check dynamic export flag): Link python test with
7354 2013-03-11 Doug Evans <dje@google.com>
7355 Keith Seitz <keiths@redhat.com>
7357 * linespec.c (find_linespec_symbols): Call find_function_symbols
7358 first, and then call lookup_prefix_sym/find_method.
7360 2013-03-11 Pedro Alves <palves@redhat.com>
7362 * charset.c (convert_between_encodings): Don't cast between
7363 different pointer to pointer types. Instead, make the 'inp' local
7364 be of the type iconv expects.
7365 (wchar_iterate): Don't cast between different pointer to pointer
7366 types. Instead, use new pointer local of the type iconv expects.
7367 * target.c (target_read_stralloc, target_fileio_read_stralloc):
7368 Add new local of type char pointer, and use it to get a
7369 char/string view of the byte buffer, instead of casting between
7370 pointer to pointer types.
7372 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
7374 * remote.c (remote_set_trace_buffer_size): Move != operator
7375 to the start of next line to fix an ARI warning.
7377 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7379 * NEWS: Add record changes.
7381 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7383 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
7384 the instruction history disassembly.
7385 * disasm.c (dump_insns): Omit the pc prefix, if requested.
7386 * disasm.h (DISASSEMBLY_OMIT_PC): New.
7388 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7390 * Makefile.in (SFILES): Add record-btrace.c
7391 (COMMON_OBS): Add record-btrace.o
7392 * record-btrace.c: New.
7393 * objfiles.c: Include btrace.h.
7394 (free_objfile): call btrace_free_objfile.
7396 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7398 * target.c (target_call_history, target_call_history_from,
7399 target_call_history_range): New.
7400 * target.h (target_ops) <to_call_history, to_call_history_from,
7401 to_call_history_range>: New fields.
7402 (target_call_history, target_call_history_from,
7403 target_call_history_range): New declaration.
7404 * record.c (get_call_history_modifiers, cmd_record_call_history,
7405 record_call_history_size): New.
7406 (_initialize_record): Add the "record function-call-history" command.
7407 Add "set/show record function-call-history-size" commands.
7408 * record.h (record_print_flag): New.
7410 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7412 * target.h (target_ops) <to_insn_history, to_insn_history_from,
7413 to_insn_history_range>: New fields.
7414 (target_insn_history): New.
7415 (target_insn_history_from): New.
7416 (target_insn_history_range): New.
7417 * target.c (target_insn_history): New.
7418 (target_insn_history_from): New.
7419 (target_insn_history_range): New.
7420 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
7421 (record_insn_history_size): New.
7422 (get_insn_number): New.
7423 (get_context_size): New.
7425 (get_insn_history_modifiers): New.
7426 (cmd_record_insn_history): New.
7427 (_initialize_record): Add "set/show record instruction-history-size"
7428 command. Add "record instruction-history" command.
7430 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7432 * record.h (record_disconnect): New.
7433 (record_detach): New.
7434 (record_mourn_inferior): New.
7436 * record-full.c (record_disconnect, record_detach,
7437 record_mourn_inferior, record_kill): Move to...
7438 * record.c: ...here.
7441 (record_unpush): New.
7442 (cmd_record_stop): Call record_stop. Replace unpush_target
7443 call with record_unpush call.
7444 (record_disconnect, record_detach): Assert that the target
7445 is of record stratum. Call record_unpush, record_stop, and
7447 (record_mourn_inferior, record_kill): Assert that the target
7448 is of record stratum. Call record_unpush and DEBUG.
7450 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7452 * record-full.h, record-full.c (record_memory_query): Rename
7454 (record_full_memory_query): ...this. Update all users.
7455 (record_arch_list_add_reg): Rename to ...
7456 (record_full_arch_list_add_reg): ...this. Update all users.
7457 (record_arch_list_add_mem): Rename to ...
7458 (record_full_arch_list_add_mem): ...this. Update all users.
7459 (record_arch_list_add_end): Rename to ...
7460 (record_full_arch_list_add_end): ...this. Update all users.
7461 (record_gdb_operation_disable_set): Rename to ...
7462 (record_full_gdb_operation_disable_set): ...this.
7465 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7467 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
7468 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
7469 (RECORD_IS_REPLAY): Renamed to ...
7470 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
7471 (RECORD_FILE_MAGIC): Renamed to ...
7472 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
7473 (record_mem_entry): Renamed to ...
7474 (record_full_mem_entry): ... this. Updated all users.
7475 (record_reg_entry): Renamed to ...
7476 (record_full_reg_entry): ... this. Updated all users.
7477 (record_end_entry): Renamed to ...
7478 (record_full_end_entry): ... this. Updated all users.
7479 (record_type) <record_end, record_reg, record_mem>: Renamed
7481 (record_full_type) <record_full_end, record_full_reg,
7482 record_full_mem>: ... this. Updated all users.
7483 (record_entry): Renamed to ...
7484 (record_full_entry): ... this. Updated all users.
7485 (record_core_buf_entry): Renamed to ...
7486 (record_full_core_buf_entry): ... this. Updated all users.
7487 (record_core_regbuf): Renamed to ...
7488 (record_full_core_regbuf): ... this. Updated all users.
7489 (record_core_start): Renamed to ...
7490 (record_full_core_start): ... this. Updated all users.
7491 (record_core_end): Renamed to ...
7492 (record_full_core_end): ... this. Updated all users.
7493 (record_core_buf_list): Renamed to ...
7494 (record_full_core_buf_list): ... this. Updated all users.
7495 (record_first): Renamed to ...
7496 (record_full_first): ... this. Updated all users.
7497 (record_list): Renamed to ...
7498 (record_full_list): ... this. Updated all users.
7499 (record_arch_list_head): Renamed to ...
7500 (record_full_arch_list_head): ... this. Updated all users.
7501 (record_arch_list_tail): Renamed to ...
7502 (record_full_arch_list_tail): ... this. Updated all users.
7503 (record_stop_at_limit): Renamed to ...
7504 (record_full_stop_at_limit): ... this. Updated all users.
7505 (record_insn_max_num): Renamed to ...
7506 (record_full_insn_max_num): ... this. Updated all users.
7507 (record_insn_num): Renamed to ...
7508 (record_full_insn_num): ... this. Updated all users.
7509 (record_insn_count): Renamed to ...
7510 (record_full_insn_count): ... this. Updated all users.
7511 (record_ops): Renamed to ...
7512 (record_full_ops): ... this. Updated all users.
7513 (record_core_ops): Renamed to ...
7514 (record_full_core_ops): ... this. Updated all users.
7515 (set_record_cmdlist): Renamed to ...
7516 (set_record_full_cmdlist): ... this. Updated all users.
7517 (show_record_cmdlist): Renamed to ...
7518 (show_record_full_cmdlist): ... this. Updated all users.
7519 (record_cmdlist): Renamed to ...
7520 (record_full_cmdlist): ... this. Updated all users.
7521 (record_beneath_to_resume_ops): Renamed to ...
7522 (record_full_beneath_to_resume_ops): ... this. Updated all users.
7523 (record_beneath_to_resume): Renamed to ...
7524 (record_full_beneath_to_resume): ... this. Updated all users.
7525 (record_beneath_to_wait_ops): Renamed to ...
7526 (record_full_beneath_to_wait_ops): ... this. Updated all users.
7527 (record_beneath_to_wait): Renamed to ...
7528 (record_full_beneath_to_wait): ... this. Updated all users.
7529 (record_beneath_to_store_registers_ops): Renamed to ...
7530 (record_full_beneath_to_store_registers_ops): ... this.
7532 (record_beneath_to_store_registers): Renamed to ...
7533 (record_full_beneath_to_store_registers): ... this.
7535 (record_beneath_to_xfer_partial_ops): Renamed to ...
7536 (record_full_beneath_to_xfer_partial_ops): ... this.
7538 (record_beneath_to_xfer_partial): Renamed to ...
7539 (record_full_beneath_to_xfer_partial): ... this.
7541 (record_beneath_to_insert_breakpoint): Renamed to ...
7542 (record_full_beneath_to_insert_breakpoint): ... this.
7544 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
7545 (record_full_beneath_to_stopped_by_watchpoint): ... this.
7547 (record_beneath_to_stopped_data_address): Renamed to ...
7548 (record_full_beneath_to_stopped_data_address): ... this.
7550 (record_beneath_to_async): Renamed to ...
7551 (record_full_beneath_to_async): ... this. Updated all users.
7552 (record_goto_insn): Renamed to ...
7553 (record_full_goto_insn): ... this. Updated all users.
7554 (record_save): Renamed to ...
7555 (record_full_save): ... this. Updated all users.
7556 (record_reg_alloc): Renamed to ...
7557 (record_full_reg_alloc): ... this. Updated all users.
7558 (record_reg_release): Renamed to ...
7559 (record_full_reg_release): ... this. Updated all users.
7560 (record_mem_alloc): Renamed to ...
7561 (record_full_mem_alloc): ... this. Updated all users.
7562 (record_mem_release): Renamed to ...
7563 (record_full_mem_release): ... this. Updated all users.
7564 (record_end_alloc): Renamed to ...
7565 (record_full_end_alloc): ... this. Updated all users.
7566 (record_end_release): Renamed to ...
7567 (record_full_end_release): ... this. Updated all users.
7568 (record_entry_release): Renamed to ...
7569 (record_full_entry_release): ... this. Updated all users.
7570 (record_list_release): Renamed to ...
7571 (record_full_list_release): ... this. Updated all users.
7572 (record_list_release_following): Renamed to ...
7573 (record_full_list_release_following): ... this.
7575 (record_list_release_first): Renamed to ...
7576 (record_full_list_release_first): ... this. Updated all users.
7577 (record_arch_list_add): Renamed to ...
7578 (record_full_arch_list_add): ... this. Updated all users.
7579 (record_get_loc): Renamed to ...
7580 (record_full_get_loc): ... this. Updated all users.
7581 (record_check_insn_num): Renamed to ...
7582 (record_full_check_insn_num): ... this. Updated all users.
7583 (record_arch_list_cleanups): Renamed to ...
7584 (record_full_arch_list_cleanups): ... this. Updated all users.
7585 (record_message): Renamed to ...
7586 (record_full_message): ... this. Updated all users.
7587 (record_message_wrapper): Renamed to ...
7588 (record_full_message_wrapper): ... this. Updated all users.
7589 (record_message_wrapper_safe): Renamed to ...
7590 (record_full_message_wrapper_safe): ... this. Updated all users.
7591 (record_gdb_operation_disable): Renamed to ...
7592 (record_full_gdb_operation_disable): ... this. Updated all users.
7593 (record_hw_watchpoint): Renamed to ...
7594 (record_full_hw_watchpoint): ... this. Updated all users.
7595 (record_exec_insn): Renamed to ...
7596 (record_full_exec_insn): ... this. Updated all users.
7597 (record_restore): Renamed to ...
7598 (record_full_restore): ... this. Updated all users.
7599 (record_async_inferior_event_token): Renamed to ...
7600 (record_full_async_inferior_event_token): ... this.
7602 (record_async_inferior_event_handler): Renamed to ...
7603 (record_full_async_inferior_event_handler): ... this.
7605 (record_core_open_1): Renamed to ...
7606 (record_full_core_open_1): ... this. Updated all users.
7607 (record_open_1): Renamed to ...
7608 (record_full_open_1): ... this. Updated all users.
7609 (record_open): Renamed to ...
7610 (record_full_open): ... this. Updated all users.
7611 (record_close): Renamed to ...
7612 (record_full_close): ... this. Updated all users.
7613 (record_resume_step): Renamed to ...
7614 (record_full_resume_step): ... this. Updated all users.
7615 (record_resumed): Renamed to ...
7616 (record_full_resumed): ... this. Updated all users.
7617 (record_execution_dir): Renamed to ...
7618 (record_full_execution_dir): ... this. Updated all users.
7619 (record_resume): Renamed to ...
7620 (record_full_resume): ... this. Updated all users.
7621 (record_get_sig): Renamed to ...
7622 (record_full_get_sig): ... this. Updated all users.
7623 (record_sig_handler): Renamed to ...
7624 (record_full_sig_handler): ... this. Updated all users.
7625 (record_wait_cleanups): Renamed to ...
7626 (record_full_wait_cleanups): ... this. Updated all users.
7627 (record_wait_1): Renamed to ...
7628 (record_full_wait_1): ... this. Updated all users.
7629 (record_wait): Renamed to ...
7630 (record_full_wait): ... this. Updated all users.
7631 (record_stopped_by_watchpoint): Renamed to ...
7632 (record_full_stopped_by_watchpoint): ... this. Updated all users.
7633 (record_disconnect): Renamed to ...
7634 (record_full_disconnect): ... this. Updated all users.
7635 (record_detach): Renamed to ...
7636 (record_full_detach): ... this. Updated all users.
7637 (record_mourn_inferior): Renamed to ...
7638 (record_full_mourn_inferior): ... this. Updated all users.
7639 (record_kill): Renamed to ...
7640 (record_full_kill): ... this. Updated all users.
7641 (record_stopped_data_address): Renamed to ...
7642 (record_full_stopped_data_address): ... this. Updated all users.
7643 (record_registers_change): Renamed to ...
7644 (record_full_registers_change): ... this. Updated all users.
7645 (record_store_registers): Renamed to ...
7646 (record_full_store_registers): ... this. Updated all users.
7647 (record_xfer_partial): Renamed to ...
7648 (record_full_xfer_partial): ... this. Updated all users.
7649 (record_breakpoint): Renamed to ...
7650 (record_full_breakpoint): ... this. Updated all users.
7651 (record_breakpoint_p): Renamed to ...
7652 (record_full_breakpoint_p): ... this. Updated all users.
7653 (record_breakpoints): Renamed to ...
7654 (record_full_breakpoints): ... this. Updated all users.
7655 (record_sync_record_breakpoints): Renamed to ...
7656 (record_full_sync_record_breakpoints): ... this.
7658 (record_init_record_breakpoints): Renamed to ...
7659 (record_full_init_record_breakpoints): ... this.
7661 (record_insert_breakpoint): Renamed to ...
7662 (record_full_insert_breakpoint): ... this. Updated all users.
7663 (record_remove_breakpoint): Renamed to ...
7664 (record_full_remove_breakpoint): ... this. Updated all users.
7665 (record_can_execute_reverse): Renamed to ...
7666 (record_full_can_execute_reverse): ... this. Updated all users.
7667 (record_get_bookmark): Renamed to ...
7668 (record_full_get_bookmark): ... this. Updated all users.
7669 (record_goto_bookmark): Renamed to ...
7670 (record_full_goto_bookmark): ... this. Updated all users.
7671 (record_async): Renamed to ...
7672 (record_full_async): ... this. Updated all users.
7673 (record_can_async_p): Renamed to ...
7674 (record_full_can_async_p): ... this. Updated all users.
7675 (record_is_async_p): Renamed to ...
7676 (record_full_is_async_p): ... this. Updated all users.
7677 (record_execution_direction): Renamed to ...
7678 (record_full_execution_direction): ... this. Updated all users.
7679 (record_info): Renamed to ...
7680 (record_full_info): ... this. Updated all users.
7681 (record_delete): Renamed to ...
7682 (record_full_delete): ... this. Updated all users.
7683 (record_is_replaying): Renamed to ...
7684 (record_full_is_replaying): ... this. Updated all users.
7685 (record_goto_entry): Renamed to ...
7686 (record_full_goto_entry): ... this. Updated all users.
7687 (record_goto_begin): Renamed to ...
7688 (record_full_goto_begin): ... this. Updated all users.
7689 (record_goto_end): Renamed to ...
7690 (record_full_goto_end): ... this. Updated all users.
7691 (record_goto): Renamed to ...
7692 (record_full_goto): ... this. Updated all users.
7693 (init_record_ops): Renamed to ...
7694 (init_record_full_ops): ... this. Updated all users.
7695 (record_core_resume): Renamed to ...
7696 (record_full_core_resume): ... this. Updated all users.
7697 (record_core_kill): Renamed to ...
7698 (record_full_core_kill): ... this. Updated all users.
7699 (record_core_fetch_registers): Renamed to ...
7700 (record_full_core_fetch_registers): ... this. Updated all users.
7701 (record_core_prepare_to_store): Renamed to ...
7702 (record_full_core_prepare_to_store): ... this. Updated all users.
7703 (record_core_store_registers): Renamed to ...
7704 (record_full_core_store_registers): ... this. Updated all users.
7705 (record_core_xfer_partial): Renamed to ...
7706 (record_full_core_xfer_partial): ... this. Updated all users.
7707 (record_core_insert_breakpoint): Renamed to ...
7708 (record_full_core_insert_breakpoint): ... this. Updated all users.
7709 (record_core_remove_breakpoint): Renamed to ...
7710 (record_full_core_remove_breakpoint): ... this. Updated all users.
7711 (record_core_has_execution): Renamed to ...
7712 (record_full_core_has_execution): ... this. Updated all users.
7713 (init_record_core_ops): Renamed to ...
7714 (init_record_full_core_ops): ... this. Updated all users.
7715 (cmd_record_restore): Renamed to ...
7716 (cmd_record_full_restore): ... this. Updated all users.
7717 (record_save_cleanups): Renamed to ...
7718 (record_full_save_cleanups): ... this. Updated all users.
7719 (cmd_record_start): Renamed to ...
7720 (cmd_record_full_start): ... this. Updated all users.
7721 (set_record_insn_max_num): Renamed to ...
7722 (set_record_full_insn_max_num): ... this. Updated all users.
7723 (set_record_command): Renamed to ...
7724 (set_record_full_command): ... this. Updated all users.
7725 (show_record_command): Renamed to ...
7726 (show_record_full_command): ... this. Updated all users.
7727 (_initialize_record): Renamed to ...
7728 (_initialize_record_full): ... this. Updated all users.
7730 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7732 * record.h: Split into this and ...
7733 * record-full.h: ... this.
7734 * record.c: Split into this and ...
7735 * record-full.c: ... this.
7736 * target.h (target_ops): Add new fields to_info_record,
7737 to_save_record, to_delete_record, to_record_is_replaying,
7738 to_goto_record_begin, to_goto_record_end, to_goto_record.
7739 (target_info_record): New.
7740 (target_save_record): New.
7741 (target_supports_delete_record): New.
7742 (target_delete_record): New.
7743 (target_record_is_replaying): New.
7744 (target_goto_record_begin): New.
7745 (target_goto_record_end): New.
7746 (target_goto_record): New.
7747 * target.c (target_info_record): New.
7748 (target_save_record): New.
7749 (target_supports_delete_record): New.
7750 (target_delete_record): New.
7751 (target_record_is_replaying): New.
7752 (target_goto_record_begin): New.
7753 (target_goto_record_end): New.
7754 (target_goto_record): New.
7755 * record.h: Declare struct cmd_list_element.
7756 (record_cmdlist): New declaration.
7757 (set_record_cmdlist): New declaration.
7758 (show_record_cmdlist): New declaration.
7759 (info_record_cmdlist): New declaration.
7760 (cmd_record_goto): New declaration.
7761 * record.c: Remove unnecessary includes.
7763 (cmd_record_goto): Remove declaration.
7764 (record_cmdlist): Now extern. Initialize.
7765 (set_record_cmdlist): Now extern. Initialize.
7766 (show_record_cmdlist): Now extern. Initialize.
7767 (info_record_cmdlist): Now extern. Initialize.
7768 (find_record_target): New.
7769 (require_record_target): New.
7770 (cmd_record_start): Update.
7771 (cmd_record_delete): Remove target-specific code.
7772 Call target_delete_record.
7773 (cmd_record_stop): Unpush any record target.
7774 (set_record_insn_max_num): Move to record-full.c
7775 (set_record_command): Add comment.
7776 (show_record_command): Add comment.
7777 (info_record_command): Update comment.
7778 Remove target-specific code.
7779 Call the record target's to_info_record.
7780 (cmd_record_start): New.
7781 (cmd_record_goto): Now extern.
7782 Remove target-specific code.
7783 Call target_goto_begin, target_goto_end, or target_goto.
7784 (_initialize_record): Move record target ops initialization to
7786 Change "record" command help text.
7787 Move "record restore", "record set", and "record show" commands to
7789 * Makefile.in (SFILES): Add record-full.c.
7790 (HFILES_NO_SRCDIR): Add record-full.h.
7791 (COMMON_OBS): Add record-full.o.
7792 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
7793 * arm-tdep.c: Include record-full.h.
7794 * i386-linux-tdep.c: Include record-full.h instead of record.h.
7795 * i386-tdep.c: Include record-full.h.
7796 * infrun.c: Include record-full.h.
7797 * linux-record.c: Include record-full.h.
7798 * moxie-tdep.c: Include record-full.h.
7799 * record-full.c: Include record-full.h.
7800 Change module comment.
7801 (set_record_full_cmdlist): New.
7802 (show_record_full_cmdlist): New.
7803 (record_full_cmdlist): New.
7804 (record_goto_insn): New declaration.
7805 (record_save): New declaration.
7806 (record_check_insn_num): Change query string.
7808 (record_delete): New.
7809 (record_is_replaying): New.
7810 (record_goto_entry): New.
7811 (record_goto_begin): New.
7812 (record_goto_end): New.
7814 (init_record_ops): Update.
7815 (init_record_core_ops): Update.
7816 (cmd_record_save): Rename to record_save. Remove target and arg checks.
7817 (cmd_record_start): New.
7818 (set_record_insn_max_num): Moved from record.c
7819 (set_record_full_command): New.
7820 (show_record_full_command): New.
7821 (_initialize_record_full): New.
7823 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7825 * target.h (add_deprecated_target_alias): New.
7826 * target.c (add_deprecated_target_alias): New.
7828 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7830 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
7832 (linux_supports_btrace): Add kernel and
7834 (kernel_supports_btrace): New function.
7835 (cpu_supports_btrace): New function.
7836 (intel_supports_btrace): New function.
7838 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7840 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
7841 * remote.c: Include btrace.h.
7842 (struct btrace_target_info): New struct.
7843 (remote_supports_btrace): New function.
7844 (send_Qbtrace): New function.
7845 (remote_enable_btrace): New function.
7846 (remote_disable_btrace): New function.
7847 (remote_teardown_btrace): New function.
7848 (remote_read_btrace): New function.
7849 (init_remote_ops): Add btrace ops.
7850 (enum <unnamed>): Add btrace packets.
7851 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
7852 (_initialize_remote): Add packet configuration for branch tracing.
7854 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7856 * features/btrace.dtd: New file.
7857 * Makefile.in (XMLFILES): Add btrace.dtd.
7858 * btrace.h (parse_xml_btrace): New declaration.
7859 * btrace.c: Include xml-support.h.
7860 (parse_xml_btrace): New function.
7861 (parse_xml_btrace_block): New function.
7862 (block_attributes): New struct.
7863 (btrace_attributes): New struct.
7864 (btrace_children): New struct.
7865 (btrace_elements): New struct.
7867 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7869 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
7870 (amd64_linux_enable_btrace): New.
7871 (amd64_linux_disable_btrace): New.
7872 (amd64_linux_teardown_btrace): New.
7873 (_initialize_amd64_linux_nat): Initialize btrace ops.
7874 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
7875 (i386_linux_enable_btrace): New.
7876 (i386_linux_disable_btrace): New.
7877 (i386_linux_teardown_btrace): New.
7878 (_initialize_i386_linux_nat): Initialize btrace ops.
7879 * config/i386/linux.mh: Add linux-btrace.o.
7880 * config/i386/linux64.mh: Add linux-btrace.o.
7882 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7884 * common/linux_btrace.h: New file.
7885 * common/linux_btrace.c: New file.
7886 * Makefile.in (SFILES): Add btrace.c.
7887 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
7888 (COMMON_OBS): Add btrace.o.
7889 (linux-btrace.o): New rule.
7891 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
7893 * target.h: Include btrace.h.
7894 (struct target_ops) <to_supports_btrace, to_enable_btrace,
7895 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
7896 * target.c (target_supports_btrace): New function.
7897 (target_enable_btrace): New function.
7898 (target_disable_btrace): New function.
7899 (target_teardown_btrace): New function.
7900 (target_read_btrace): New function.
7901 * btrace.h: New file.
7902 * btrace.c: New file.
7903 * Makefile.in: Add btrace.c.
7904 * gdbthread.h: Include btrace.h.
7905 (struct thread_info): Add btrace field.
7906 * thread.c: Include btrace.h.
7907 (clear_thread_inferior_resources): Call target_teardown_btrace.
7908 * common/btrace-common.h: New file.
7910 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
7912 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
7913 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
7914 kill_status to outer block.
7916 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
7918 Fix entry-values if the callee called a noreturn function.
7919 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
7920 get_frame_address_in_block. Add new comment.
7922 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
7924 Fix entry-values in C++ across CUs.
7925 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
7926 lookup_minimal_symbol. Add a comment.
7928 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
7931 2013-03-08 Yao Qi <yao@codesourcery.com>
7933 * tracepoint.c (_initialize_tracepoint): Indent the code.
7935 2013-03-08 Pedro Alves <palves@redhat.com>
7937 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
7938 (parse_find_args, find_command): Change type of pattern buffer
7939 locals to 'gdb_byte *'.
7941 2013-03-08 Stan Shebs <stan@codesourcery.com>
7942 Hafiz Abid Qadeer <abidh@codesourcery.com>
7944 * NEWS: Mention set and show trace-buffer-size commands.
7946 * target.h (struct target_ops): New method
7947 to_set_trace_buffer_size.
7948 (target_set_trace_buffer_size): New macro.
7949 * target.c (update_current_target): Set up new method.
7950 * tracepoint.c (trace_buffer_size): New global.
7951 (start_tracing): Send it to the target.
7952 (set_trace_buffer_size): New function.
7953 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
7954 * remote.c (remote_set_trace_buffer_size): New function.
7955 (_initialize_remote): Use it.
7956 (QTBuffer:size) New remote command.
7957 (PACKET_QTBuffer_size): New enum.
7958 (remote_protocol_features): Add an entry for
7959 PACKET_QTBuffer_size.
7961 2013-03-08 Tom Tromey <tromey@redhat.com>
7963 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
7966 2013-03-07 Pedro Alves <palves@redhat.com>
7968 * target.c (target_read_stralloc, target_fileio_read_alloc):
7969 *Cast pointer to 'gdb_byte *' in target call.
7971 2013-03-07 Pedro Alves <palves@redhat.com>
7973 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
7976 2013-03-07 Keith Seitz <keiths@redhat.com>
7978 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
7979 (trace_pass_command): Likewise.
7980 * cli/cli-cmds.c: Include cli/cli-utils.h.
7981 (source_command): Use skip-spaces.
7982 (disassemble_command): Likewise.
7983 * findcmd.c: Include cli/cli-utils.h.
7984 (parse_find_args): Use skip_spaces.
7985 * go32-nat.c: Include cli/cli-utils.h.
7986 (go32_sldt): Use skip_spaces.
7987 (go32_sgdt): Likewise.
7988 (go32_sidt): Likewise.
7989 (go32_pde): Likewise.
7990 (go32_pte): Likewise.
7991 (go32_pte_for_address): Likewise.
7992 * infcmd.c: Include cli/cli-utils.h.
7993 (registers_info): Use skip_spaces.
7994 * linux-tdep.c (read_mapping): Use skip_spaces_const.
7995 (linux_info_proc): Likewise.
7996 * linux-thread-db.c: Include cli/cli-utils.h.
7997 (info_auto_load_libthread_db): Use skip_spaces_const.
7998 * m32r-rom.c: Include cli/cli-utils.h.
7999 (m32r_upload_command): Use skip_spaces.
8000 * maint.c: Include cli/cli-utils.h.
8001 (maintenance_translate_address): Use skip_spaces.
8002 * mi/mi-parse.c: Include cli/cli-utils.h.
8003 (mi_parse_argv): Use skip_spaces.
8004 (mi_parse): Likewise.
8005 * minsyms.c: Include cli/cli-utils.h.
8006 (msymbol_hash_iw): Use skip_spaces_const.
8007 * objc-lang.c: Include cli/cli-utils.h.
8008 (parse_selector): Use skip_spaces.
8009 (parse_method): Likewise.
8010 * python/python.c: Include cli/cli-utils.h.
8011 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
8012 (python_command)[HAVE_PYTHON]: Likewise.
8013 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
8014 * remote-m32r-sdi.c: Include cli/cli-utils.h.
8015 (m32r_load): Use skip_spaces.
8016 * serial.c: Include cli/cli-utils.h.
8017 (serial_open): Use skip_spaces_const.
8018 * stack.c: Include cli/cli-utils.h.
8019 (parse_frame_specification_1): Use skip_spaces_const.
8020 * symfile.c: Include cli/cli-utils.h.
8021 (set_ext_lang_command): Use skip_spaces.
8022 * symtab.c: Include cli/cli-utils.h.
8023 (rbreak_command): Use skip_spaces.
8024 * thread.c (thread_name_command): Use skip_spaces.
8025 * tracepoint.c (validate_actionline): Use skip_spaces.
8026 (encode_actions_1): Likewise.
8027 (trace_find_range_command): Likewise.
8028 (trace_find_outside_command): Likewise.
8029 (trace_dump_actions): Likewise.
8031 2013-03-07 Pedro Alves <palves@redhat.com>
8033 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
8034 * expprint.c (print_subexp_standard): Likewise.
8035 * utils.c (host_char_to_target): Likewise.
8036 * valprint.c (generic_emit_char, generic_printstr): Likewise.
8037 * varobj.c (value_get_print_value): Change type of local to char*.
8038 Cast it gdb_byte * in call to language printer.
8040 2013-03-07 Pedro Alves <palves@redhat.com>
8042 * charset.c (struct wchar_iterator) <input>: Change type to 'const
8044 (make_wchar_iterator): Remove cast to char*.
8045 (wchar_iterate): Change type of local.
8047 2013-03-07 Pedro Alves <palves@redhat.com>
8049 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
8050 for 'regcache->register_status'.
8052 2013-03-07 Pedro Alves <palves@redhat.com>
8054 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
8057 2013-03-07 Pedro Alves <palves@redhat.com>
8059 * stap-probe.c (handle_stap_probe): Add cast to char*.
8061 2013-03-07 Pedro Alves <palves@redhat.com>
8063 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
8064 RECORD_MSGRCV>: Pass a signed variable to
8065 regcache_raw_read_signed, instead of an unsigned one.
8067 2013-03-07 Pedro Alves <palves@redhat.com>
8069 * remote-notif.c (notif_debug): Change type to int.
8070 * remote-notif.h (notif_debug): Likewise.
8072 2013-03-07 Pedro Alves <palves@redhat.com>
8074 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
8076 2013-03-07 Pedro Alves <palves@redhat.com>
8078 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
8079 * remote.h (hex2bin, bin2hex): ... here.
8080 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
8082 2013-03-07 Eli Zaretskii <eliz@gnu.org>
8084 * utils.c (initialize_utils): Improve doc strings of "set/show
8085 width", "set/show height", and "set/show pagination".
8087 2013-03-06 Keith Seitz <keiths@redhat.com>
8089 * ax-gdb.c (gen_printf): Make FORMAT const.
8090 * ax-gdb.h (gen_printf): Likewise.
8091 * ax-general.c (ax_string): Make STR const.
8092 * ax.h (ax_string): Likewise.
8094 2013-03-06 Doug Evans <dje@google.com>
8096 * elfread.c (elf_symfile_read): Move debugging printf to more
8099 2013-03-06 Pedro Alves <palves@redhat.com>
8101 * python/py-utils.c (target_string_to_unicode): Delete function.
8102 * python/python-internal.h (target_string_to_unicode): Delete
8105 2013-03-06 Pierre Muller <muller@sourceware.org>
8107 * linespec.c (get_current_search_block): ARI fix, use (void)
8108 for empty parameter list.
8110 2013-03-05 Doug Evans <dje@google.com>
8112 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
8113 of old ada_lookup_symbol_list. In !full_search case, don't
8115 (ada_lookup_symbol_list): Delete arg full_search, all callers
8116 updated. Call ada_lookup_symbol_list_worker.
8117 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
8118 * ada-lang.h (ada_lookup_symbol_list): Update.
8119 * language.h (language_defn): Update comment for
8120 la_iterate_over_symbols.
8121 * linespec.c (iterate_over_file_blocks): New function.
8122 (iterate_over_all_matching_symtabs): Call it.
8123 (lookup_prefix_sym): Ditto.
8124 (get_current_search_block): New function.
8125 (get_search_block): Delete.
8126 (find_label_symbols): Call get_current_search_block.
8127 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
8128 * symtab.c (iterate_over_symbols): Don't search superblocks.
8130 2013-03-05 Yao Qi <yao@codesourcery.com>
8132 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
8133 parameter VAR's type from "unsigned int" to "int".
8134 * command.h (var_zuinteger_unlimited): Update its comments.
8135 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
8137 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
8139 * NEWS: Mention new target x86_64-*-cygwin*.
8141 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
8143 * configure.host: Add x86_64-*-cygwin* as host.
8144 * configure.tgt: Add x86_64-*-cygwin* as target.
8145 * config/i386/cygwin64.mh: New file.
8147 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
8149 * linespec.c (decode_line_2): Fix duplicate request off by two message.
8151 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
8153 * linespec.c (struct linespec_canonical_name): New.
8154 (struct linespec_state): Change canonical_names type to it.
8155 (add_sal_to_sals): Change variable canonical_name to canonical. Change
8156 xrealloc element size. Initialize the different CANONICAL fields.
8157 (canonical_to_fullform): New.
8158 (filter_results): Use it. Add variables canonical, fullform and
8160 (struct decode_line_2_item, decode_line_2_compare_items): New.
8161 (decode_line_2): Remove variables iter and item_names, add variables
8162 items and items_count. Modify the code for these new variables.
8164 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
8166 * coff-pe-read.c (read_pe_exported_syms): Don't return without
8169 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
8171 * tracepoint.c (build_traceframe_info): Add code for byte order.
8173 2013-03-02 Kevin Buettner <kevinb@redhat.com>
8175 * v850-tdep.c: (v850e2_register_name): Revise system register
8176 names to match current V850E2M architecture specifications.
8177 Update register number enum comments too.
8179 2013-03-01 Jiong Wang <jiwang@tilera.com>
8180 Pedro Alves <palves@redhat.com>
8182 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
8184 (tilegx_skip_prologue): Limit prologue analysis to section end.
8186 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
8188 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
8191 2013-03-01 Pedro Alves <palves@redhat.com>
8193 Use gdb_byte for bytes from the program being debugged.
8195 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
8196 Change type of local 'buf' to gdb_byte.
8197 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
8198 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
8199 * cris-tdep.c (cris_sigcontext_addr)
8200 (cris_sigtramp_frame_unwind_cache): Likewise.
8201 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
8202 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
8204 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
8205 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
8206 (hppa32_hpux_search_dummy_call_sequence)
8207 (hppa_hpux_supply_save_state): Likewise.
8208 * hppa-linux-tdep.c (insns_match_pattern)
8209 (hppa_linux_find_global_pointer): Likewise.
8210 * hppa-tdep.c (hppa_in_function_epilogue_p)
8211 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
8212 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
8213 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
8214 (i386fbsd_collect_uthread): Likewise.
8215 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
8216 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
8217 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
8218 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
8219 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
8220 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
8221 (ia64_libunwind_frame_prev_register)
8222 (ia64_libunwind_sigtramp_frame_this_id)
8223 (ia64_find_global_pointer_from_dynamic_section)
8224 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
8225 (ia64_unwind_pc): Likewise.
8226 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
8227 * m68hc11-tdep.c (m68hc11_push_dummy_call)
8228 (m68hc11_extract_return_value): Likewise.
8229 * m68klinux-nat.c (fetch_register, store_register): Likewise.
8230 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
8231 (mep_get_insn, mep_push_dummy_call): Likewise.
8232 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
8233 (mips_linux_in_dynsym_stub): Likewise.
8234 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
8235 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
8236 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
8238 * remote-mips.c (mips_set_register): Likewise.
8239 * remote-sim.c (gdbsim_fetch_register): Likewise.
8240 * score-tdep.c (score7_fetch_inst): Change type of parameter
8241 'memblock' and local 'buf' to gdb_byte.
8242 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
8243 Change type of local 'buf' to gdb_byte. Adjust.
8244 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
8246 (score7_analyze_prologue): Change type of 'memblock' and
8247 'memblock_ptr' locals to gdb_byte*.
8248 * sh64-tdep.c (sh64_extract_return_value)
8249 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
8250 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
8251 * solib-pa64.c (pa64_solib_create_inferior_hook)
8252 (pa64_open_symbol_file_object): Remove local 'buf'.
8253 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
8254 (som_open_symbol_file_object): Likewise.
8255 * solib-spu.c (spu_current_sos): Likewise.
8256 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
8257 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
8258 (spu_store_registers): Likewise.
8259 * target.c (debug_print_register): Likewise.
8260 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
8261 * xstormy16-tdep.c (xstormy16_store_return_value)
8262 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
8263 (xstormy16_find_jmp_table_entry): Likewise.
8265 2013-03-01 Jiong Wang <jiwang@tilera.com>
8267 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
8268 (tilegx_gdbarch_init): Install it.
8270 2013-02-28 Tom Tromey <tromey@redhat.com>
8272 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
8275 2013-02-28 Doug Evans <dje@google.com>
8277 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
8278 * python/python.c (gdbpy_find_pc_line): Ditto.
8280 2013-02-28 Tom Tromey <tromey@redhat.com>
8282 * contrib/excheck.py: New file.
8283 * contrib/exsummary.py: New file.
8284 * contrib/gcc-with-excheck: New file.
8286 2013-02-28 Tom Tromey <tromey@redhat.com>
8288 * python/python.c (gdbpy_print_stack): Call begin_line and
8289 fprintf_filtered inside TRY_CATCH.
8291 2013-02-28 Tom Tromey <tromey@redhat.com>
8293 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
8296 2013-02-28 Tom Tromey <tromey@redhat.com>
8298 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
8299 frame_object_to_frame_info inside TRY_CATCH.
8301 2013-02-28 Tom Tromey <tromey@redhat.com>
8303 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
8306 2013-02-28 Tom Tromey <tromey@redhat.com>
8308 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
8310 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
8312 * windows-nat.c: Throughout, fix format strings and casts of
8313 printf-like functions to avoid type related warnings on all
8315 (handle_output_debug_string): Fetch context information address
8316 from debug string using string_to_core_addr.
8318 2013-02-27 Jiong Wang <jiwang@tilera.com>
8320 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
8321 * regformats/reg-tilegx32.dat: New.
8323 2013-02-27 Jiong Wang <jiwang@tilera.com>
8325 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
8327 2013-02-27 Jiong Wang <jiwang@tilera.com>
8329 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
8331 2013-02-27 Yao Qi <yao@codesourcery.com>
8332 Pedro Alves <palves@redhat.com>
8334 * tracepoint.c (tfile_trace_find): For tfind
8335 pc/tp/range/outside, look for the next trace frame instead of
8336 always starting from frame 0.
8338 2013-02-26 Anthony Green <green@moxielogic.com>
8340 * configure.tgt: Add support for moxie-*-rtems* target.
8342 2013-02-25 Pedro Alves <palves@redhat.com>
8344 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
8347 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
8349 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
8350 if $fp is used as the virtual frame pointer.
8352 2013-02-23 Alan Modra <amodra@gmail.com>
8354 * elfread.c (elf_symtab_read): Do not use udata.p here to find
8356 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
8357 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
8358 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
8359 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
8361 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
8364 * elfread.c (build_id_bfd_get): Make the return type const.
8365 (build_id_verify): Make the check parameter const.
8366 (build_id_to_debug_filename): Make the build_id parameter and variable
8368 (find_separate_debug_file_by_buildid): Make the variable build_id const.
8370 2013-02-21 Alan Modra <amodra@gmail.com>
8372 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
8374 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
8376 Add a new method 'disassemble' to gdb.Architecture class.
8377 * python/py-arch.c (archpy_disassmble): Implementation of the
8378 new method gdb.Architecture.disassemble.
8379 (arch_object_methods): Add entry for the new method.
8381 2013-02-20 Jiong Wang <jiwang@tilera.com>
8383 * MAINTAINERS (Write After Approval): Add myself to the list.
8385 2013-02-19 Pedro Alves <palves@redhat.com>
8387 Garbage collect 'struct monitor_ops'::load_routine.
8389 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
8390 * monitor.c (monitor_load): No longer call
8391 current_monitor->load_routine.
8392 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
8393 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
8394 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
8396 2013-02-19 Pedro Alves <palves@redhat.com>
8400 Harmonize with generic_load.
8402 * monitor.c: Include "readline/readline.h".
8403 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
8404 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
8405 long/strtol for the 'load_offset' local. Error out if no argument
8406 is given or if too many arguments are given. Tilde expand the
8407 passed in file name.
8409 2013-02-19 Kai Tietz <ktietz@redhat.com>
8412 * symfile.c (load_section_data): Change type of load_offset
8414 (generic_load): User strtoulst instead of strtoul for conversion
8417 2013-02-19 Jiong Wang <jiwang@tilera.com>
8419 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
8420 for return address, "lr" register, saved on stack.
8421 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
8422 after we invoke tilegx_analyze_prologue.
8424 2013-02-19 Jiong Wang <jiwang@tilera.com>
8426 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
8428 2013-02-19 Jiong Wang <jiwang@tilera.com>
8430 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
8432 2013-02-19 Jiong Wang <jiwang@tilera.com>
8434 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
8435 (tilegx_write_pc): New function.
8436 (tilegx_cannot_reference_register): Return zero if REGNO
8437 is TILEGX_FAULTNUM_REGNUM.
8438 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
8439 (tilegx_register_name): Add handling of "faultnum" register.
8440 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
8441 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
8442 handling of TILEGX_FAULTNUM_REGNUM.
8443 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
8445 2013-02-19 Jiong Wang <jiwang@tilera.com>
8447 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
8448 should be aligned to 64bit.
8450 2013-02-19 Kai Tietz <ktietz@redhat.com>
8452 * windows-nat.c (windows_xfer_memory): Fix debug-output
8455 2013-02-19 Lei Liu <lei.liu2@windriver.com>
8457 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
8458 Don't check DSP register number if HAVE_DSP is not set.
8460 2013-02-19 Alan Modra <amodra@gmail.com>
8462 * elfread.c (struct build_id): Delete. Use struct elf_build_id
8463 throughout file instead.
8464 (build_id_bfd_get): Update to use new elf_tdata build_id field.
8465 Don't xmalloc return value.
8466 (build_id_verify): Similarly. Don't xfree.
8467 (build_id_to_debug_filename): Update.
8468 (find_separate_debug_file_by_buildid): Update, don't xfree.
8470 2013-02-18 Tom Tromey <tromey@redhat.com>
8473 * dwarf2read.c (read_subrange_type): Use result of
8476 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
8478 * frame.c: Remove one extra white space after #include
8481 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
8483 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
8485 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
8487 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
8488 and dir commands into an if block.
8490 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
8492 * python/py-breakpoint (struct pybp_code): Use int instead of
8495 2013-02-15 Pedro Alves <pedro@codesourcery.com>
8496 Hafiz Abid Qadeer <abidh@codesourcery.com>
8498 * NEWS: Mention new field "trace-file".
8499 * tracepoint.c (trace_status_mi): Output "trace-file" field.
8500 (tfile_open): Record the trace file's filename in the trace
8502 (tfile_files_info): Mention the name of the trace file.
8503 Check the "filename" field explicitely.
8504 (trace_status_command): Explicitely check "filename" field.
8505 (trace_find_command): Ditto.
8506 (trace_find_pc_command): Ditto.
8507 (trace_find_tracepoint_command): Ditto.
8508 (trace_find_line_command): Ditto.
8509 (trace_find_range_command): Ditto.
8510 (trace_find_outside_command): Ditto.
8511 * tracepoint.h (struct trace_status) <from_file>: Rename it
8512 to "filename" and make it hold the trace file's filename
8513 instead of a boolean.
8514 * remote.c (remote_get_trace_status): Initialize "filename"
8515 field with NULL instead of 0.
8517 2013-02-15 Yao Qi <yao@codesourcery.com>
8519 * remote.c: Fix a typo.
8521 2013-02-14 Pierre Muller <muller@sourceware.org>
8523 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
8525 2013-02-14 Pedro Alves <palves@redhat.com>
8527 * utils.c (savestring): Don't #undef it. Move function to
8528 common/common-utils.c.
8529 * common/common-utils.c: Include gdb_string.h.
8530 (savestring): Move here from utils.c.
8531 * common/common-utils.h (savestring): Declare.
8533 2013-02-14 Pedro Alves <palves@redhat.com>
8535 * utils.c (savestring): Rename parameter 'size' to 'len'.
8537 2013-02-14 Pedro Alves <palves@redhat.com>
8538 Yufeng Zhang <yufeng.zhang@arm.com>
8540 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
8541 (aarch64_inferior_data, struct aarch64_inferior_data):
8543 (struct aarch64_process_info): New.
8544 (aarch64_process_list): New global.
8545 (aarch64_find_process_pid, aarch64_add_process)
8546 (aarch64_process_info_get): New functions.
8547 (aarch64_inferior_data_get): Delete.
8548 (aarch64_process_info_get): New function.
8549 (aarch64_forget_process): New function.
8550 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
8551 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
8552 aarch64_get_debug_reg_state.
8553 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
8554 instead of linux_nat_iterate_watchpoint_lwps.
8555 (aarch64_linux_new_fork): New function.
8556 (aarch64_linux_child_post_startup_inferior): Use
8557 aarch64_forget_process instead of aarch64_init_debug_reg_state.
8558 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
8559 (aarch64_linux_remove_hw_breakpoint)
8560 (aarch64_handle_aligned_watchpoint)
8561 (aarch64_handle_unaligned_watchpoint)
8562 (aarch64_linux_insert_watchpoint)
8563 (aarch64_linux_remove_watchpoint)
8564 (aarch64_linux_stopped_data_address): Adjust to pass the current
8565 process id to aarch64_debug_reg_state.
8566 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
8567 linux_nat_new_fork hook, and aarch64_forget_process as
8568 linux_nat_forget_process hook; remove the call to
8569 register_inferior_data_with_cleanup.
8571 2013-02-14 Pedro Alves <palves@redhat.com>
8573 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
8574 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
8577 2013-02-14 Pedro Alves <pedro@codesourcery.com>
8578 Hafiz Abid Qadeer <abidh@codesourcery.com>
8580 * tracepoint.h (validate_trace_state_variable_name): Declare.
8581 * tracepoint.c (validate_trace_state_variable_name): New.
8582 (trace_variable_command): Parse the trace state variable's name
8583 without using parse_expression. Do several validations.
8584 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
8585 trace state variable's name with parse_expression. Validate it.
8587 2013-02-14 Yao Qi <yao@codesourcery.com>
8589 * infcmd.c (breakpoint_proceeded): Remove it.
8591 2013-02-14 Yao Qi <yao@codesourcery.com>
8593 * tracepoint.c (end_actions_pseudocommand): Make it static.
8594 (while_stepping_pseudocommand): Likewise.
8595 * tracepoint.h (end_actions_pseudocommand): Remove the
8597 (while_stepping_pseudocommand): Likewise.
8599 2013-02-14 Yao Qi <yao@codesourcery.com>
8601 * cli/cli-decode.c (help_cmd): Remove the declaration of
8603 (help_all): Likewise.
8605 2013-02-13 Pedro Alves <palves@redhat.com>
8607 * amd64-linux-nat.c (update_debug_registers_callback):
8609 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
8611 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
8612 i386_debug_reg_state.
8613 (amd64_linux_new_fork): New function.
8614 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
8615 linux_nat_new_fork hook, and i386_forget_process as
8616 linux_nat_forget_process hook.
8617 * i386-linux-nat.c (update_debug_registers_callback):
8619 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
8621 (i386_linux_prepare_to_resume): Pass the lwp's pid to
8622 i386_debug_reg_state.
8623 (i386_linux_new_fork): New function.
8624 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
8625 linux_nat_new_fork hook, and i386_forget_process as
8626 linux_nat_forget_process hook.
8627 * i386-nat.c (i386_init_dregs): Delete.
8628 (i386_inferior_data, struct i386_inferior_data):
8630 (struct i386_process_info): New.
8631 (i386_process_list): New global.
8632 (i386_find_process_pid, i386_add_process, i386_process_info_get):
8634 (i386_inferior_data_get): Delete.
8635 (i386_process_info_get): New function.
8636 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
8637 (i386_forget_process): New function.
8638 (i386_cleanup_dregs): Rewrite.
8639 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
8640 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
8641 (i386_stopped_data_address, i386_insert_hw_breakpoint)
8642 (i386_remove_hw_breakpoint): Adjust to pass the current process id
8643 to i386_debug_reg_state.
8644 (i386_use_watchpoints): Don't register inferior data.
8645 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
8647 (i386_forget_process): Declare.
8648 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
8649 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
8651 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
8652 (add_initial_lwp): New, factored out from ...
8653 (add_lwp): ... this. Don't check the number of lwps before
8654 calling linux_nat_new_thread.
8655 (linux_nat_iterate_watchpoint_lwps): Delete.
8656 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
8657 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
8659 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
8661 (linux_nat_kill, linux_nat_mourn_inferior): Call
8662 linux_nat_forget_process.
8663 (linux_nat_set_new_fork, linux_nat_set_forget_process)
8664 (linux_nat_forget_process): New functions.
8665 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
8667 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
8668 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
8670 (linux_nat_set_new_fork, linux_nat_set_forget_process)
8671 (linux_nat_forget_process): New declarations.
8673 * amd64fbsd-nat.c (super_mourn_inferior): New global.
8674 (amd64fbsd_mourn_inferior): New function.
8675 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
8676 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
8678 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
8680 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
8683 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
8685 * aarch64-linux-nat.c (debug_reg_change_callback)
8686 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
8689 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
8691 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
8694 2013-02-13 Pedro Alves <palves@redhat.com>
8695 Hafiz Abid Qadeer <abidh@codesourcery.com>
8697 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
8699 2013-02-12 Tom Tromey <tromey@redhat.com>
8702 * c-exp.y (lex_one_token): Initialize other fields of yylval on
8704 (classify_inner_name): Remove 'first_name' argument, add
8705 'context'. Remove unused variable.
8706 (yylex): Explicitly maintain the context type. Exit loop earlier
8707 if NAME result is seen.
8709 2013-02-12 Pedro Alves <palves@redhat.com>
8711 * amd64-darwin-tdep.c: Add (C) after Copyright.
8712 * cli/cli-cmds.h: Ditto.
8713 * cli/cli-decode.c: Ditto.
8714 * cli/cli-decode.h: Ditto.
8715 * cli/cli-dump.c: Ditto.
8716 * cli/cli-dump.h: Ditto.
8717 * cli/cli-interp.c: Ditto.
8718 * cli/cli-logging.c: Ditto.
8719 * cli/cli-script.c: Ditto.
8720 * cli/cli-script.h: Ditto.
8721 * cli/cli-setshow.c: Ditto.
8722 * cli/cli-setshow.h: Ditto.
8723 * cli/cli-utils.c: Ditto.
8724 * cli/cli-utils.h: Ditto.
8725 * config/alpha/nm-osf3.h: Ditto.
8726 * config/djgpp/djconfig.sh: Ditto.
8727 * config/i386/nm-fbsd.h: Ditto.
8728 * config/i386/nm-i386gnu.h: Ditto.
8729 * config/nm-linux.h: Ditto.
8730 * config/nm-nto.h: Ditto.
8731 * config/rs6000/nm-rs6000.h: Ditto.
8732 * config/sparc/nm-sol2.h: Ditto.
8733 * darwin-nat-info.c: Ditto.
8736 * gdb-demangle.h: Ditto.
8737 * i386-darwin-nat.c: Ditto.
8738 * i386-darwin-tdep.c: Ditto.
8739 * linux-fork.h: Ditto.
8740 * m32c-tdep.c: Ditto.
8741 * microblaze-linux-tdep.c: Ditto.
8742 * microblaze-rom.c: Ditto.
8743 * microblaze-tdep.c: Ditto.
8744 * microblaze-tdep.h: Ditto.
8745 * mips-linux-tdep.h: Ditto.
8746 * ppc-ravenscar-thread.c: Ditto.
8747 * ppc-ravenscar-thread.h: Ditto.
8748 * prologue-value.c: Ditto.
8749 * prologue-value.h: Ditto.
8750 * ravenscar-thread.c: Ditto.
8751 * ravenscar-thread.h: Ditto.
8752 * sparc-ravenscar-thread.c: Ditto.
8753 * sparc-ravenscar-thread.h: Ditto.
8754 * tilegx-linux-tdep.c: Ditto.
8755 * unwind_stop_reasons.def: Ditto.
8756 * windows-nat.h: Ditto.
8757 * xtensa-linux-tdep.c: Ditto.
8758 * xtensa-xtregs.c: Ditto.
8759 * regformats/regdat.sh: Ditto.
8760 * regformats/regdef.h: Ditto.
8762 2013-02-12 Pedro Alves <palves@redhat.com>
8764 * break-catch-sig.c: Update copyright years.
8766 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
8768 Add support for a destructor for ui_out data and use it to
8769 provide a ui_out destructor.
8770 * ui-out.h: Declare the new ui_out destructor.
8771 (ui_out_impl): Add a field for data destructor in ui_out_impl.
8772 * ui-out.c (default_data_destroy): Add a default data destructor
8774 (default_ui_out_impl): Set the new data_destroy field to
8775 default_data_destroy
8776 (uo_data_destroy): Local function which invokes the data
8777 destructor if present.
8778 (clear_table): Local function which clears the table data of a
8780 (ui_out_destroy): Public function which frees a ui_out object.
8781 (ui_out_table_end): Use the new clear_table function.
8782 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
8784 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
8787 2013-02-11 Doug Evans <dje@google.com>
8789 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
8790 (printf_decfloat): New function. Broken out from ui_printf.
8791 Remove unnecessary code to shift the entire format string down.
8792 (printf_pointer): New function.
8793 (ui_printf): Code to print C strings, wide C strings, decfloats,
8794 and pointers moved to separate functions.
8796 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
8798 * valops.c (value_assign): Handling bitfield offset in
8799 `lval_internalvar_component' case.
8801 2013-02-08 Doug Evans <dje@google.com>
8803 * common/format.c (parse_format_string): Fix whitespace.
8805 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
8807 * stack.c (return_command): Work around uninitialized variable
8810 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
8812 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
8813 number of the registers from 36 to 34.
8815 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
8817 * NEWS: Mention new AArch64 native and target support.
8819 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
8821 * MAINTAINERS (Write After Approval): Add myself.
8823 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
8824 Marcus Shawcroft <marcus.shawcroft@arm.com>
8825 Nigel Stephens <nigel.stephens@arm.com>
8826 Yufeng Zhang <yufeng.zhang@arm.com>
8828 * aarch64-linux-nat.c: New file.
8829 * config/aarch64/linux.mh: New file.
8830 * configure.host: Add AArch64.
8831 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
8833 2013-02-07 Doug Evans <dje@google.com>
8835 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
8836 disassemble command.
8838 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
8840 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
8841 set_gdbarch_fetch_tls_load_module_address.
8843 2013-02-06 David S. Miller <davem@davemloft.net>
8845 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
8846 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
8847 * value.c (struct_return_convention): New function.
8848 (using_struct_return): Implement in terms of struct_return_convention.
8849 * value.h (struct_return_convention): Declare.
8850 * stack.c (return_command): Allow successful overriding of the return
8851 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
8853 2013-02-06 Tom Tromey <tromey@redhat.com>
8855 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
8856 outside of TRY_CATCH.
8858 2013-02-06 Yao Qi <yao@codesourcery.com>
8860 * mi/mi-interp.c: Include "tracepoint.h".
8861 (mi_tsv_modified): Declare.
8862 (mi_tsv_created, mi_tsv_deleted): Update declaration.
8863 (mi_interpreter_init): Call observer_attach_tsv_modified.
8864 (mi_tsv_modified): New.
8865 (mi_tsv_created, mi_tsv_deleted): Update.
8866 * tracepoint.c (trace_variable_command): Call
8867 observer_notify_tsv_modified if the initial value of tsv is
8869 (delete_trace_state_variable): Call
8870 observer_notify_tsv_deleted earlier.
8871 (trace_variable_command): Caller update.
8872 (create_tsv_from_upload): Likewise.
8873 * observer.sh: Declare "struct trace_state_variable".
8875 * NEWS: Mention the new MI notification "=tsv-modified".
8877 2013-02-05 Doug Evans <dje@google.com>
8879 * completer.c (location_completer): Fix typo in comment.
8881 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
8883 * breakpoint.c (add_location_to_breakpoint): Insert the location with
8886 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
8888 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
8889 Refactor if statement to avoid trailing || operator.
8891 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
8893 * NEWS: Add PowerPC FreeBSD as a new native configuration.
8895 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
8897 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
8898 * configure.host: Add powerpc*-*-freebsd* target.
8899 * configure.tgt: Add target info for powerpc*-*-freebsd*.
8900 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
8901 * config/powerpc/fbsd.mh: New file.
8903 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
8904 Denys Vlasenko <dvlasenk@redhat.com>
8905 Pedro Alves <palves@redhat.com>
8907 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
8908 (struct elf_internal_linux_prpsinfo): Forward declare.
8909 * gdbarch.h, gdbarch.c: Regenerate.
8910 * linux-tdep.c: Include `cli/cli-utils.h'.
8911 (linux_fill_prpsinfo): New function.
8912 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
8913 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
8914 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
8915 depending on gdbarch pointer bitness.
8916 * ppc-linux-tdep.c: Include elf-bfd.h.
8917 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
8920 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
8921 Marcus Shawcroft <marcus.shawcroft@arm.com>
8922 Nigel Stephens <nigel.stephens@arm.com>
8923 Yufeng Zhang <yufeng.zhang@arm.com>
8925 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
8927 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
8928 Marcus Shawcroft <marcus.shawcroft@arm.com>
8929 Nigel Stephens <nigel.stephens@arm.com>
8930 Yufeng Zhang <yufeng.zhang@arm.com>
8932 * aarch64-newlib-tdep.c: New file.
8933 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
8935 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
8936 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
8937 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
8938 * osabi.c (gdb_osabi_names): Add "Newlib".
8940 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
8941 Marcus Shawcroft <marcus.shawcroft@arm.com>
8942 Nigel Stephens <nigel.stephens@arm.com>
8943 Yufeng Zhang <yufeng.zhang@arm.com>
8945 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
8946 (ALLDEPFILES): Add aarch64-linux-tdep.c.
8947 * aarch64-linux-tdep.c: New file.
8948 * aarch64-linux-tdep.h: New file.
8949 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
8950 * configure.tgt: Add aarch64-none-linux-gnu.
8952 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
8953 Marcus Shawcroft <marcus.shawcroft@arm.com>
8954 Nigel Stephens <nigel.stephens@arm.com>
8955 Yufeng Zhang <yufeng.zhang@arm.com>
8957 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
8958 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
8959 (ALLDEPFILES): Add aarch64-tdep.c.
8960 * aarch64-tdep.c: New file.
8961 * aarch64-tdep.h: New file.
8962 * configure.tgt: Add AArch64.
8963 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
8964 (aarch64-expedite): New definition.
8965 * features/aarch64-core.xml: New file.
8966 * features/aarch64-fpu.xml: New file.
8967 * features/aarch64-without-fpu.c: New file (generated).
8968 * features/aarch64-without-fpu.xml: New file.
8969 * features/aarch64.c: New file (generated).
8970 * features/aarch64.xml: New file.
8971 * regformats/aarch64-without-fpu.dat: New file (generated).
8972 * regformats/aarch64.dat: New file (generated).
8974 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
8976 * contrib/expect-read1.c: New file.
8977 * contrib/expect-read1.sh: New file.
8979 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
8981 * dwarf2read.c (file_file_name): New function with code from
8983 (file_full_name): Move most of the code to file_file_name.
8984 (macro_start_file): Rename variable full_name to file_name and use
8985 file_file_name for it. Add comp_dir parameter to new_macro_table.
8986 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
8987 macro_source_file->filename access by macro_source_fullname call.
8988 * macroscope.c (_initialize_macroscope): Update the new_macro_table
8990 * macrotab.c (struct macro_table): New field comp_dir.
8991 (macro_include): New variables link_fullname and source_fullname.
8992 Replace any macro_source_file->filename access by macro_source_fullname
8994 (macro_lookup_inclusion): Remove the partial filenames checking code.
8995 (check_for_redefinition): New variables source_fullname and
8996 found_key_fullname. Replace any macro_source_file->filename access by
8997 macro_source_fullname call.
8998 (macro_undef): New variables source_fullname and key_fullname. Replace
8999 any macro_source_file->filename access by macro_source_fullname call.
9000 (macro_lookup_definition): New variables retval and source_fullname.
9001 Replace any macro_source_file->filename access by macro_source_fullname
9003 (foreach_macro): New variable key_fullname. Replace any
9004 macro_source_file->filename access by macro_source_fullname call.
9005 (foreach_macro_in_scope): New variable datum_fullname. Replace any
9006 macro_source_file->filename access by macro_source_fullname call.
9007 (new_macro_table): Add parameter comp_dir. Initialize T with it.
9008 (macro_source_fullname): New function.
9009 * macrotab.h (struct macro_source_file): Extent the filename field
9011 (new_macro_table): New parameter comp_dir, add a comment for it.
9012 (macro_source_fullname): new declaration.
9014 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9016 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
9017 this_real_name to outer block. Use it also for
9018 compare_filenames_for_search.
9019 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
9020 with dw2_get_real_path for file_matcher, considering also
9021 BASENAMES_MAY_DIFFER.
9022 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
9024 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9026 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
9027 to the file_matcher parameter. Pass 0 to it.
9028 (dwarf2_create_include_psymtab): Copy also DIRNAME.
9029 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
9030 NULL psymtab_to_fullname result.
9031 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
9032 an expected filename instead.
9033 (expand_symtabs_matching_via_partial): Add basenames parameter to the
9034 file_matcher parameter. Call also psymtab_to_fullname, after newly
9035 considering BASENAMES_MAY_DIFFER.
9036 * source.c (rewrite_source_path): Remove static.
9037 * source.h (rewrite_source_path): New declaration.
9038 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
9039 the expand_symtabs_matching field. Comment it.
9040 * symtab.c (file_matches): New function comment. Add parameter
9041 basenames, implement it.
9042 (search_symbols_file_matches): Add basenames parameter. Update the
9043 file_matches caller.
9044 (search_symbols): Match FILES also against symtab_to_fullname.
9045 Optimize it for BASENAMES_MAY_DIFFER.
9047 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9049 * source.c (print_source_lines_base): Print for TUI also "fullname".
9050 * tui/tui-data.c (init_content_element): Change tui_locator_element
9052 * tui/tui-data.h (struct tui_locator_element): Likewise.
9053 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
9054 tui_update_locator_filename calls to tui_update_locator_fullname.
9055 Replace symtab->filename refererence by symtab_to_fullname call.
9056 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
9057 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
9058 field to full_name. Replace symtab->filename refererence by
9059 symtab_to_fullname call.
9060 (tui_show_symtab_source): Rename parameter to fullname. Change
9061 tui_locator_element field to full_name.
9062 * tui/tui-stack.c: Include source.h.
9063 (tui_set_locator_filename): Rename the declaration to ...
9064 (tui_set_locator_fullname): ... here. Rename its parameter to
9065 fullname, updates its comment.
9066 (tui_set_locator_info): Rename its parameter to fullname.
9067 (tui_set_locator_filename): Rename the definition to ...
9068 (tui_set_locator_fullname): ... here. Rename its parameter to
9069 fullname, updates its comment. Change tui_locator_element field to
9071 (tui_set_locator_info): Rename its parameter to fullname.
9072 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
9073 (tui_update_locator_filename): Rename to ...
9074 (tui_update_locator_fullname): ... here. Rename callee to
9075 tui_set_locator_fullname.
9076 (tui_show_frame_info): Replace symtab->filename refererence by
9077 symtab_to_fullname call.
9078 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
9079 (tui_update_locator_fullname): ... here.
9080 * tui/tui-winsource.c (tui_display_main): Rename the callee to
9081 tui_update_locator_fullname. Replace symtab->filename refererence by
9082 symtab_to_fullname call.
9083 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
9084 Rename the callee to tui_update_locator_fullname.
9085 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
9087 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9089 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
9090 by symtab_to_filename_for_display calls.
9091 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
9092 (clear_command): New variable sal_fullname, initialize it. Replace
9093 compare_filenames_for_search by filename_cmp with sal_fullname.
9094 (say_where, update_static_tracepoint): Replace symtab->filename
9095 refererences by symtab_to_filename_for_display calls.
9096 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
9098 * dwarf2read.c: Include source.h.
9099 (fixup_go_packaging): Replace symtab->filename refererences by
9100 symtab_to_filename_for_display calls.
9101 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
9102 Replace symtab->filename refererences by symtab_to_filename_for_display
9104 (create_sals_line_offset, convert_linespec_to_sals): New variable
9105 fullname, initialize it, replace symtab->filename reference by the
9107 * linux-fork.c: Include source.h.
9108 (info_checkpoints_command): Replace symtab->filename refererences by
9109 symtab_to_filename_for_display calls.
9110 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
9111 by symtab_to_filename_for_display calls.
9112 * mdebugread.c: Include source.h.
9113 (psymtab_to_symtab_1): Replace symtab->filename refererences by
9114 symtab_to_filename_for_display calls.
9115 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
9116 (mi_cmd_file_list_exec_source_files): Likewise.
9117 * printcmd.c: Include source.h.
9118 (build_address_symbolic): Replace symtab->filename refererences by
9119 symtab_to_filename_for_display calls.
9120 * psymtab.c (partial_map_symtabs_matching_filename)
9121 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
9122 with psymtab_to_fullname.
9123 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
9124 by symtab_to_filename_for_display calls.
9125 (stpy_get_filename): New variable filename, initialize it, use instead
9126 of symtab->filename refererences.
9127 (salpy_str): Make variable filename const char *. Replace
9128 symtab->filename refererences by symtab_to_filename_for_display calls.
9129 * skip.c: Include source.h and filenames.h.
9130 (skip_file_command): Remove const from the symtab variable. Replace
9131 symtab->filename refererences by symtab_to_fullname call.
9132 (function_name_is_marked_for_skip): New variables searched_for_fullname
9133 and fullname. Use them to search also with symtab's fullname.
9134 * source.c (find_source_lines): Replace symtab->filename refererences
9135 by symtab_to_filename_for_display calls.
9136 (print_source_lines_base): New variable filename, use it instead of
9137 symtab->filename. Replace symtab->filename refererences by
9138 symtab_to_filename_for_display calls.
9139 (line_info, forward_search_command): Replace symtab->filename
9140 refererences by symtab_to_filename_for_display calls.
9141 (reverse_search_command): Replace symtab->filename refererences by
9142 symtab_to_filename_for_display calls. New variable filename for it.
9143 * stack.c (frame_info): Likewise.
9144 * symmisc.c: Include source.h.
9145 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
9146 (maintenance_info_symtabs): Replace symtab->filename refererences by
9147 symtab_to_filename_for_display calls.
9148 * symtab.c (iterate_over_some_symtabs): Call
9149 compare_filenames_for_search also with symtab_to_fullname.
9150 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
9151 symtab->filename refererences by symtab_to_filename_for_display calls.
9152 (find_line_symtab): Replace symtab->filename refererences by
9153 symtab_to_filename_for_display calls.
9154 (file_matches): Replace filename_cmp by compare_filenames_for_search.
9155 (print_symbol_info): Make the last parameter const char *. New
9156 variable s_filename. Use it in the function.
9157 (symtab_symbol_info): Make the last_filename variable const char *.
9158 Replace symtab->filename refererences by symtab_to_filename_for_display
9160 (rbreak_command): New variable fullname. Use it. Replace
9161 symtab->filename refererence by symtab_to_filename_for_display call.
9162 * tracepoint.c (set_traceframe_context, trace_find_line_command)
9163 (print_one_static_tracepoint_marker): Replace symtab->filename
9164 refererences by symtab_to_filename_for_display calls.
9165 * tui/tui-source.c (tui_set_source_content): New variables filename and
9166 s_filename. Replace symtab->filename refererences by this variable.
9167 Replace other symtab->filename refererences by
9168 symtab_to_filename_for_display calls.
9170 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
9171 Jan Kratochvil <jan.kratochvil@redhat.com>
9173 Add a new variable that controls a way in which filenames are
9175 * NEWS (set filename-display): New entry.
9176 * source.c (filename_display_basename, filename_display_relative)
9177 (filename_display_absolute, filename_display_kind_names)
9178 (filename_display_string, show_filename_display_string)
9179 (symtab_to_filename_for_display): New.
9180 (_initialize_source): Added initialization of 'filename-display'
9182 * source.h (symtab_to_filename_for_display): Added declaration.
9183 * stack.c (print_frame): Added new variable and calling of a new
9184 function and condition with this variable. Changed third argument of
9185 calling of a function.
9187 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9189 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
9190 Rename field reference filename to fullname.
9191 * tui/tui-data.h (struct tui_source_info): Rename field filename to
9192 fullname. New comment for it.
9193 * tui/tui-source.c (tui_set_source_content): Rename field reference
9194 filename to fullname. Initialize field by symtab_to_fullname now.
9195 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
9196 reference filename to fullname. Use symtab_to_fullname during
9199 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9202 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
9203 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
9204 filename to fullname. Rename variable this_name to this_fullname.
9205 Lowercase FILENAME_CMP call.
9206 (dw2_find_symbol_file): New comment for the returned string.
9207 (dwarf2_gdb_index_functions): Rename the function to
9208 dw2_expand_symtabs_with_fullname.
9209 * psymtab.c (read_psymtabs_with_filename): Rename to ...
9210 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
9212 (psym_functions): Rename the function to read_psymtabs_with_fullname.
9213 * symfile.h (struct quick_symbol_functions): Rename field
9214 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
9215 parameter filename to fullname. Document returned string meaning for
9217 * symtab.c (find_line_symtab): Rename the called function to
9218 expand_symtabs_with_fullname.
9220 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9223 * breakpoint.c (clear_command): Remove variable is_abs, unify the
9224 call of filename_cmp with compare_filenames_for_search.
9225 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
9226 is_abs, unify the call of FILENAME_CMP with
9227 compare_filenames_for_search. New gdb_asserts for real_path and name.
9228 Unify the call of compare_filenames_for_search with FILENAME_CMP.
9229 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
9230 * symfile.h (struct quick_symbol_functions): Extend the comment for
9231 map_symtabs_matching_filename.
9232 * symtab.c (compare_filenames_for_search): Remove the function comment
9233 relative path requirement. Handle absolute filenames, with a comment.
9234 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
9235 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
9236 real_path and name. Unify the call of compare_filenames_for_search
9238 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
9240 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9243 * breakpoint.c (print_breakpoint_location): Replace bp_location field
9244 source_file references by symtab field references. Remove variables
9246 (momentary_breakpoint_from_master, add_location_to_breakpoint):
9247 (clear_command, say_where): Replace bp_location field source_file
9248 references by symtab field references.
9249 (bp_location_dtor): Remove the source_file reference.
9250 (update_static_tracepoint): Replace bp_location field source_file
9251 references by symtab field references.
9252 (breakpoint_free_objfile): New function.
9253 * breakpoint.h (struct bp_location): Extend the comment for line_number.
9254 Replace the field source_file by field symtab, extend its comment.
9255 (breakpoint_free_objfile): New declaration.
9256 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
9257 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
9258 field source_file references by symtab field references.
9260 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9262 Replace xfullpath calls by gdb_realpath calls.
9263 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
9265 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
9266 Remove it from the iterate_over_some_symtabs call.
9267 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
9268 Remove it from the dw2_map_expand_apply calls, remove a block handling
9270 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
9271 Remove it from the iterate_over_some_symtabs call.
9272 (partial_map_symtabs_matching_filename): Remove parameter full_path.
9273 Remove it from the partial_map_expand_apply calls, remove a block
9274 handling it. Drop gdb_realpath call and cleanups from the real_path
9276 * source.c (openp): Drop the comment part about xfullpath. Replace
9277 xfullpath calls by gdb_realpath calls.
9278 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
9279 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
9280 from method map_symtabs_matching_filename and its comment.
9281 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
9283 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
9284 remove it also from the function comment, remove a block handling it.
9285 Drop gdb_realpath call and cleanups from the real_path handling.
9286 (iterate_over_symtabs): Drop variable full_path and its use.
9287 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
9288 * utils.c (xfullpath): Remove.
9289 * utils.h (xfullpath): Remove.
9291 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
9293 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
9294 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
9295 (ALLDEPFILES): Add ppc64-tdep.c.
9296 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
9297 ppc64-tdep.o to gdb_target_obs.
9298 * ppc64-tdep.h: New file.
9299 * ppc64-tdep.c: New file.
9300 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
9301 ppc-linux-tdep.c to here.
9302 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
9303 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
9304 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
9305 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
9306 from ppc-linux-tdep.c to here.
9307 (ppc64_convert_from_func_ptr_addr): Rename from
9308 ppc64_linux_convert_from_func_ptr_addr to
9309 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
9312 (read_insn): Move from ppc-linux-tdep.c to here.
9313 (insns_match_pattern, insn_d_field, insn_ds_field): Move
9314 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
9315 * ppc-linux-tdep.c: Include ppc64-tdep.h.
9316 Removed above functions.
9317 (ppc_linux_init_abi): Adjust.
9319 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
9321 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
9323 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
9325 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
9327 2013-02-01 Pedro Alves <palves@redhat.com>
9329 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
9330 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
9332 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
9334 * elfread.c (elf_symfile_read): Limit separate debug info additions to
9335 files with no separate debug info.
9336 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
9337 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
9338 only for files with no separate debug info.
9340 2013-01-31 Tom Tromey <tromey@redhat.com>
9342 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
9344 (struct jit_program_space_data): Rename from jit_inferior_data.
9346 (get_jit_program_space_data): Rename from get_jit_inferior_data.
9347 Change return type. Attach data to program space.
9348 (jit_program_space_data_cleanup): Rename from
9349 jit_inferior_data_cleanup; change argument type.
9350 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
9352 (jit_register_code): Update.
9353 (jit_update_inferior_cache): Remove.
9354 (jit_breakpoint_deleted): Get jit data from the location's program
9356 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
9357 'ps_data', change type.
9358 (jit_inferior_init, jit_breakpoint_re_set_internal)
9359 (jit_event_handler): Update.
9360 (free_objfile_data): Get data from objfile's program space.
9361 (_initialize_jit): Update.
9363 2013-01-31 Tom Tromey <tromey@redhat.com>
9366 * jit.c (struct jit_inferior_data) <cached_code_address,
9367 jit_breakpoint>: New fields.
9368 (jit_breakpoint_re_set_internal): Fix logging. Only create
9369 breakpoint if cached address has changed.
9370 (jit_update_inferior_cache, jit_breakpoint_deleted): New
9372 (_initialize_jit): Register breakpoint deleted observer.
9374 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
9376 * infrun.c (handle_syscall_event): Remove unused gdbarch.
9377 (save_infcall_suspend_state): Ifdef out unused inf.
9378 (restore_infcall_suspend_state): Ifdef out unused inf.
9379 * jit.c (jit_register_code): Remove unused i, b, inf_data.
9380 (jit_frame_sniffer): Remove unused inf_data.
9382 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
9384 * c-exp.y (classify_inner_name): Remove unused type.
9385 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
9386 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
9388 (c_get_string): Remove unused kind.
9389 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
9391 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
9393 * charset.c (intermediate_encoding): Remove unused i.
9394 * completer.c (signal_completer): Remove unused i.
9395 * continuations.c (discard_my_continuations_1): Remove unused
9397 * corelow.c (core_close): Remove unuseD name.
9398 (get_core_siginfo): Remove unused pid.
9399 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
9401 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
9402 (loclist_describe_location): Remove unused first.
9403 * event-top.c (command_line_handler): Remove unused got_eof.
9404 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
9405 (resize_section_table): Remove unused old_value.
9406 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
9407 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
9408 * i386-tdep.c (i386_process_record): Remove unused rex.
9409 * infcmd.c (get_return_value): Remove unused uiout.
9410 * jv-lang.c (type_from_class): Remove unused is_array.
9411 * jv-valprint.c (java_val_print): Remove unused i.
9412 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
9413 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
9414 * m2-typeprint.c (m2_print_type): Remove unused code.
9415 * macroexp.c (get_character_constant): Remove unused body_start.
9416 (macro_stringify): Remove unused result.
9417 * objc-lang.c (find_methods): Remove unused gdbarch.
9418 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
9419 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
9420 * stack.c (print_frame_args): Remove unused summary.
9421 * thread.c (thread_apply_command): Remove unused p.
9422 * valarith.c (value_x_unop): Remove unused mangle_ptr.
9423 * valops.c (search_struct_method): Remove unused skip.
9424 * valprint.c (generic_val_print): Remove unused byte_order.
9425 * varobj.c (varobj_update): Remove unused changed.
9426 * cli/cli-cmds.c (complete_command): Remove unused next_item.
9427 (alias_command): Remove unused c.
9428 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
9429 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
9431 (mi_cmd_data_write_memory): Remove unused word_format.
9432 (mi_cmd_data_write_memory_bytes): Remove unused r.
9433 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
9435 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
9436 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
9439 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
9441 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
9442 * symtab.c (iterate_over_symtabs): Remove unused s.
9443 (find_pc_sect_symtab): Remove unused pspAce.
9444 (find_pc_sect_line): Remove unused alt_symtab.
9445 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
9446 (completion_list_add_name): Remove unused newsize.
9448 2013-01-31 Tom Tromey <tromey@redhat.com>
9451 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
9454 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
9456 * target.c (target_read_string): Remove unused origlen.
9458 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
9460 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
9461 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
9462 * ax-general.c (ax_print): Remove unused is_float.
9463 * blockframe.c (block_innermost_frame): Remove unused start, end.
9464 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
9466 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
9468 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
9469 (svr4_read_so_list): Remove unused lmo.
9470 * solib-target.c (solib_target_relocate_section_addresses): Remove
9473 2013-01-30 Tom Tromey <tromey@redhat.com>
9475 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
9477 2013-01-30 Tom Tromey <tromey@redhat.com>
9479 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
9480 * utils.c (gnu_debuglink_crc32): Remove.
9481 * utils.h (gnu_debuglink_crc32): Don't declare.
9483 2013-01-30 Tom Tromey <tromey@redhat.com>
9485 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
9486 (read_structure_type, read_enumeration_type): Remove cast.
9488 2013-01-30 Tom Tromey <tromey@redhat.com>
9490 * dwarf2read.c (read_namespace_type): Remove cast.
9491 (read_typedef): Likewise.
9493 2013-01-29 Tom Tromey <tromey@redhat.com>
9495 * dwarf2read.c (free_dwo_file): Remove assert.
9497 2013-01-29 Tom Tromey <tromey@redhat.com>
9499 * value.c (deprecated_set_value_modifiable): Remove.
9500 * value.h (deprecated_set_value_modifiable): Remove.
9502 2013-01-28 Doug Evans <dje@google.com>
9504 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
9505 to addresses from dwo files.
9507 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
9509 * valops.c (find_overload_match): Remove unused argument 'lax'.
9510 * value.h: Remove unused argument 'lax' from the declaration of
9511 find_overload_match.
9512 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
9513 to find_overload_match.
9514 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
9515 argument to find_overload_match.
9517 2013-01-25 Tom Tromey <tromey@redhat.com>
9519 * dwarf2read.c (processing_has_namespace_info): Remove.
9520 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
9521 (process_die, read_func_scope, dwarf2_start_symtab)
9522 (new_symbol_full): Update.
9524 2013-01-25 Tom Tromey <tromey@redhat.com>
9526 * cp-namespace.c (cp_set_block_scope): Remove.
9527 * cp-support.h (cp_set_block_scope): Remove.
9528 * dbxread.c: Include block.h.
9529 (cp_set_block_scope): New function.
9530 (process_one_symbol): Update.
9531 * dwarf2read.c (read_func_scope): Use block_set_scope.
9533 2013-01-25 Pedro Alves <palves@redhat.com>
9535 * remote.c (add_current_inferior_and_thread): Tweak comment.
9537 2013-01-25 Tom Tromey <tromey@redhat.com>
9539 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
9540 (cp_add_using_directive): Add 'copy_names' argument.
9541 * cp-support.h (cp_add_using_directive): Update.
9542 (struct using_direct) <import_src, import_dest, alias,
9543 declaration>: Now const.
9544 * dwarf2read.c (read_import_statement): Use obconcat.
9545 Don't copy names passed to cp_add_using_directive.
9547 2013-01-25 Tom Tromey <tromey@redhat.com>
9549 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
9551 2013-01-25 Pedro Alves <palves@redhat.com>
9553 * remote.c (stop_reply_extract_thread): New.
9554 (add_current_inferior_and_thread): New parameter 'wait_status'.
9556 (remote_start_remote): Pass wait status to
9557 add_current_inferior_and_thread.
9558 (extended_remote_run): Update comment.
9559 (extended_remote_create_inferior_1): Pass wait status to
9560 add_current_inferior_and_thread.
9562 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
9563 Ulrich Weigand <uweigand@de.ibm.com>
9565 * valarith.c (value_vector_widen): New function for replicating a
9566 scalar into a vector.
9567 (value_binop): Use value_vector_widen to widen scalar to vector
9568 rather than casting, this better matches gcc C behaviour.
9569 * valops.c (value_casst): Update logic for casting between vector
9570 types, and for casting from scalar to vector, try to match gcc C
9572 * value.h (value_vector_widen): Declare.
9573 * opencl-lang.c (opencl_value_cast): New opencl specific casting
9574 function, handle special case for casting scalar to vector.
9575 (opencl_relop): Use opencl_value_cast.
9576 (evaluate_subexp_opencl): Use opencl_value_cast instead of
9577 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
9578 in order to use opencl_value_cast.
9580 2013-01-25 Yao Qi <yao@codesourcery.com>
9582 * event-loop.c: Include "queue.h".
9583 (gdb_event_p): New typedef.
9584 (DECLARE_QUEUE_P): Use.
9585 (DEFINE_QUEUE_P): Use.
9586 (async_queue_event): Remove.
9587 (gdb_event_xfree): New.
9588 (initialize_event_loop): New.
9589 (process_event): Use QUEUE macros.
9590 (event_queue): Remove.
9591 (gdb_wait_for_event): Caller update.
9592 (check_async_event_handlers): Likewise.
9593 (poll_timers): Likewise.
9594 * event-loop.h (initialize_event_loop): Declare.
9595 * event-loop.c (gdb_event_xfree): New.
9596 * top.c (gdb_init): Call initialize_event_loop.
9598 2013-01-25 Yao Qi <yao@codesourcery.com>
9600 * event-loop.c (async_queue_event): Remove one parameter
9601 'position'. Remove code handling 'position' == TAIL.
9602 (gdb_wait_for_event): Caller update.
9603 (check_async_event_handlers): Caller update.
9604 (poll_timers): Caller update.
9605 * event-loop.h (enum queue_position): Remove.
9607 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
9609 * MAINTAINERS: Update my email.
9611 2013-01-25 Yao Qi <yao@codesourcery.com>
9613 * main.c (print_gdb_help): Remove "--epoch" from the help
9616 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
9618 * symtab.c (skip_prologue_using_sal): Consider a file
9619 change the same as an increased line number
9621 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
9623 * MAINTAINERS (Write After Approval): Add myself to the list.
9625 2013-01-24 Tom Tromey <tromey@redhat.com>
9627 * ada-lang.h (ada_decode_symbol): Make return type const.
9628 * ada-lang.c (ada_decode_symbol): Likewise.
9630 2013-01-23 Doug Evans <dje@google.com>
9632 * linespec.c (find_linespec_symbols): Make static.
9634 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
9636 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
9637 type on float conversion for complex type.
9639 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
9641 Add a new class gdb.Architecture which exposes GDB's
9642 internal representation of architecture via GDB Python API.
9643 * Makefile.in: Add entries corresponding to the new file
9645 * NEWS (Python Scripting): Add entries for the new class
9646 gdb.Architecture and the new method gdb.Frame.architecture.
9647 * python/py-arch.c: Implement gdb.Architecture class.
9648 * python/py-frame.c (frapy_arch): Implement the method
9649 gdb.Frame.architecture().
9650 (frame_object_methods): Add 'architecture' to the method table.
9651 * python/python-internal.h: Add declarations of new utility
9653 * python/python.c (_initialize_python): Initialize
9654 gdb.Architecture class.
9656 2013-01-23 Doug Evans <dje@google.com>
9658 Work around binutils/15021.
9659 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
9660 type_unit_group out of union s. All uses updated.
9661 (read_index_from_section): Watch for index version 8.
9662 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
9664 (write_psymtabs_to_index): Increment version number to 8.
9666 2013-01-22 Pedro Alves <palves@redhat.com>
9668 * annotate.c (breakpoint_changed): Skip if breakpoint is not
9671 2013-01-22 Pedro Alves <palves@redhat.com>
9673 * annotate.c (annotate_breakpoints_changed): Rename to ...
9674 (annotate_breakpoints_invalid): ... this. Make static.
9675 (breakpoint_changed): Adjust.
9676 (_initialize_annotate): Always install the observers. Install a
9677 "breakpoint_created" observer.
9678 * annotate.h (annotate_breakpoints_changed): Delete declaration.
9679 * breakpoint.c (set_breakpoint_condition)
9680 (breakpoint_set_commands, do_map_commands_command)
9681 (init_raw_breakpoint, clear_command, set_ignore_count)
9682 (enable_breakpoint_disp): No longer call
9683 annotate_breakpoints_changed.
9685 2013-01-22 Pedro Alves <palves@redhat.com>
9687 * annotate.c: Include "inferior.h".
9688 (frames_invalid_emitted)
9689 (breakpoints_invalid_emitted): New globals.
9690 (async_background_execution_p): New function.
9691 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
9692 emitting the annotation if it has already been emitted.
9693 (annotate_display_prompt): New function.
9694 * annotate.h (annotate_display_prompt): New declaration.
9695 * event-top.c: Include annotate.h.
9696 (display_gdb_prompt): Call annotate_display_prompt.
9698 2013-01-22 Pedro Alves <palves@redhat.com>
9700 * annotate.c (ignore_count_changed): Delete.
9701 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
9702 (annotate_ignore_count_change): Delete.
9703 (annotate_stopped): Don't emit a delayed breakpoints-changed
9705 * annotate.h (annotate_ignore_count_change): Delete.
9706 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
9707 annotate_ignore_count_change.
9709 2013-01-22 Tom Tromey <tromey@redhat.com>
9711 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
9712 require_rvalue for a register location.
9714 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
9716 * breakpoint.c (print_one_breakpoint_location): Add MI
9717 field 'thread-groups' when printing a breakpoint.
9718 (output_thread_groups): New function.
9720 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
9722 * python/lib/gdb/commands/explore.py
9723 (CompoundExplorer.explore_expr): Correct the name of a method
9725 (ExploreTypeCommand.invoke): Add a missing 'return'.
9727 2013-01-21 Tom Tromey <tromey@redhat.com>
9729 * gdb_obstack.h (obconcat): Move declaration here, from...
9730 * symfile.h (obconcat): ... here.
9731 * gdb_obstack.c: New file.
9732 (obconcat): Move from...
9733 * symfile.c (obconcat): ... here.
9734 * Makefile.in (SFILES): Add gdb_obstack.c.
9735 (COMMON_OBS): Add gdb_obstack.o.
9737 2013-01-21 Tom Tromey <tromey@redhat.com>
9739 * symfile.h (obsavestring): Don't declare.
9740 * symfile.c (obsavestring): Remove.
9741 * ada-exp.y: Use obstack_copy0, not obsavestring.
9742 * ada-lang.c: Use obstack_copy0, not obsavestring.
9743 * coffread.c: Use obstack_copy0, not obsavestring.
9744 * cp-namespace.c: Use obstack_copy0, not obsavestring.
9745 * dbxread.c: Use obstack_copy0, not obsavestring.
9746 * dwarf2read.c: Use obstack_copy0, not obsavestring.
9747 * jit.c: Use obstack_copy0, not obsavestring.
9748 * mdebugread.c: Use obstack_copy0, not obsavestring.
9749 * psymtab.c: Use obstack_copy0, not obsavestring.
9750 * stabsread.c: Use obstack_copy0, not obsavestring.
9751 * xcoffread.c: Use obstack_copy0, not obsavestring.
9753 2013-01-21 Tom Tromey <tromey@redhat.com>
9755 * dwarf2read.c (fixup_go_packaging): Save package name
9757 * gdbtypes.c (init_type): Don't copy name.
9759 2013-01-21 Tom Tromey <tromey@redhat.com>
9761 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
9763 (struct attribute) <u.str>: Now const.
9764 (struct fnfieldlist) <name>: Now const.
9765 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
9766 (partial_die_parent_scope): Make return type const.
9767 (partial_die_full_name, add_partial_symbol): Update.
9768 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
9770 (find_file_and_directory): Make 'name' and 'comp_dir' const.
9771 (read_file_scope, read_func_scope, dwarf2_add_field)
9772 (dwarf2_add_member_fn, read_structure_type)
9773 (process_enumeration_scope, read_array_type, read_module_type)
9774 (read_base_type, read_subrange_type): Update.
9775 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
9776 (new_symbol_full, guess_full_die_structure_name): Update.
9777 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
9778 (dwarf2_name): Return const type.
9779 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
9782 2013-01-21 Tom Tromey <tromey@redhat.com>
9784 * gdbtypes.c (init_type): Make 'name' const.
9785 * gdbtypes.h (init_type): Update.
9787 2013-01-21 Tom Tromey <tromey@redhat.com>
9789 * buildsym.c (patch_subfile_names): Use set_last_source_file.
9790 (start_symtab): Make 'name' and 'dirname' const. Use
9791 set_last_source_file.
9792 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
9793 (last_source_file): Define. Now static.
9794 (set_last_source_file, get_last_source_file): New functions.
9795 * buildsym.h (last_source_file): Don't declare.
9796 (start_symtab): Update.
9797 (set_last_source_file, get_last_source_file): Declare.
9798 * coffread.c (complete_symtab): Use set_last_source_file.
9799 (coff_end_symtab): Likewise.
9800 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
9801 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
9802 set_last_source_file.
9803 (process_one_symbol): Use get_last_source_file.
9804 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
9805 (psymtab_to_symtab_1): Use get_last_source_file.
9806 * xcoffread.c (process_linenos): Use get_last_source_file.
9807 (complete_symtab): Use set_last_source_file.
9808 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
9809 (scan_xcoff_symtab): Use set_last_source_file.
9811 2013-01-21 Tom Tromey <tromey@redhat.com>
9813 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
9814 (symbol_set_names): Remove casts. Handle field const-ness.
9816 2013-01-21 Tom Tromey <tromey@redhat.com>
9818 * dwarf2read.c (new_symbol_full): Remove cast.
9819 * symtab.c (symbol_set_demangled_name): Make 'name' const.
9820 * symtab.h (symbol_set_demangled_name): Update.
9822 2013-01-21 Tom Tromey <tromey@redhat.com>
9824 * main.c (captured_main): Call bfd_init.
9826 2013-01-21 Tom Tromey <tromey@redhat.com>
9828 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
9829 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
9830 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
9833 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
9835 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
9837 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
9839 Fix gdb.fortran/common-block.exp crash in PIE mode.
9840 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
9842 * f-valprint.c (info_common_command_for_block): Expect
9843 LOC_COMMON_BLOCK in gdb_assert.
9844 * symtab.h (struct general_symbol_info): Update comment for the
9845 common_block member.
9846 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
9847 (enum address_class): New member LOC_COMMON_BLOCK.
9849 2013-01-18 David Blaikie <dblaikie@gmail.com>
9851 * MAINTAINERS (Write After Approval): Add "David Blaikie".
9853 2013-01-18 Tom Tromey <tromey@redhat.com>
9856 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
9857 Call require_rvalue.
9859 2013-01-18 Yao Qi <yao@codesourcery.com>
9861 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
9862 (dbx_read_symtab): New declaration.
9863 (dbx_psymtab_to_symtab): Delete.
9864 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
9865 Rename parameter PST to SELF. Exchanged two parameters.
9866 (start_psymtab): Caller update.
9867 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
9868 (dwarf2_read_symtab): New declaration.
9869 (dwarf2_psymtab_to_symtab): Delete.
9870 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
9871 Rename parameter PST to SELF. Exchanged two parameters.
9872 (create_partial_symtab): Caller update.
9873 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
9874 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
9875 Rename parameter PST to SELF. Exchanged two parameters.
9876 (parse_partial_symbols, new_psymtab): Caller update.
9877 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
9879 * psymtab.c (psymtab_to_symtab): Caller update.
9880 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
9881 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
9882 Rename parameter PST to SELF. Exchanged two parameters.
9883 (xcoff_start_psymtab): Caller update.
9885 2013-01-18 Yao Qi <yao@codesourcery.com>
9887 * infrun.c (proceed): Rename local variable 'oneproc' to
9890 2013-01-17 Doug Evans <dje@google.com>
9892 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
9893 (dw2_build_type_unit_groups): Delete. All uses updated.
9895 * symtab.h (struct symbol_search): Add comment.
9897 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
9899 * symtab.c (compare_filenames_for_search): New comment for
9902 2013-01-17 Tom Tromey <tromey@redhat.com>
9904 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
9906 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
9908 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
9909 initialize it by existing make_cleanup. Call new do_cleanups.
9911 2013-01-17 Tom Tromey <tromey@redhat.com>
9913 * cp-abi.c (cp_abi_completer): New function.
9914 (_initialize_cp_abi): Set completer for "set cp-abi".
9916 2013-01-17 Tom Tromey <tromey@redhat.com>
9918 * mem-break.c: Remove obsolete comment.
9919 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
9921 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
9923 * jit.c (jit_reader_load_command): Interpret the jit reader name
9924 as an absolute path if it begins with a forward slash.
9926 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
9930 * jit.c (finalize_symtab): Ensure that only the global block has a
9933 2013-01-17 Pedro Alves <palves@redhat.com>
9935 * acinclude.m4: Include ../config/plugins.m4,
9936 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
9937 * Makefile.in (aclocal_m4_deps): Update.
9938 * aclocal.m4: Renegerate.
9940 2013-01-16 Doug Evans <dje@google.com>
9942 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
9944 2013-01-16 Pedro Alves <palves@redhat.com>
9945 Tom Tromey <tromey@redhat.com>
9948 * NEWS: Add "catch signal".
9949 * breakpoint.c (base_breakpoint_ops): No longer static.
9950 (bpstat_explains_signal): New function.
9951 (init_catchpoint): No longer static.
9952 (base_breakpoint_explains_signal): New function.
9953 (base_breakpoint_ops): Initialize new field.
9954 * breakpoint.h (enum bpstat_signal_value): New.
9955 (struct breakpoint_ops) <explains_signal>: New field.
9956 (bpstat_explains_signal): Remove macro, declare as function.
9957 (base_breakpoint_ops, init_catchpoint): Declare.
9958 * break-catch-sig.c: New file.
9959 * inferior.h (signal_catch_update): Declare.
9960 * infrun.c (signal_catch): New global.
9961 (handle_syscall_event): Update for change to
9962 bpstat_explains_signal.
9963 (handle_inferior_event): Likewise. Always handle random signals
9965 (signal_cache_update): Check signal_catch.
9966 (signal_catch_update): New function.
9967 (_initialize_infrun): Initialize signal_catch.
9968 * Makefile.in (SFILES): Add break-catch-sig.c.
9969 (COMMON_OBS): Add break-catch-sig.o.
9971 2013-01-16 Tom Tromey <tromey@redhat.com>
9973 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
9974 (print_one_catch_solib, print_one_catch_syscall)
9975 (print_one_catch_exec, print_one_exception_catchpoint): Emit
9978 2013-01-16 Yao Qi <yao@codesourcery.com>
9980 * printcmd.c (current_display_number): Make it static.
9982 2013-01-16 Yao Qi <yao@codesourcery.com>
9984 * infcmd.c (step_once): Don't check '!single_inst' as it was
9987 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
9989 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
9991 2013-01-14 Tom Tromey <tromey@redhat.com>
9993 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
9995 * command.h (add_setshow_string_noescape_cmd): Update.
9996 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
9997 (complete_set_gnutarget): New function.
9998 (_initialize_core): Set the "set gnutarget" completer.
10000 2013-01-14 Tom Tromey <tromey@redhat.com>
10003 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
10004 (c_type_print_modifier): Likewise.
10005 * dwarf2read.c (read_tag_restrict_type): New function.
10006 (read_type_die_1): Handle DW_TAG_restrict_type.
10007 * gdbtypes.c (make_restrict_type): New function.
10008 (recursive_dump_type): Handle TYPE_RESTRICT.
10009 * gdbtypes.h (enum type_flag_values): Renumber.
10010 (enum type_instance_flag_value): Add
10011 TYPE_INSTANCE_FLAG_RESTRICT.
10012 (TYPE_RESTRICT): New macro.
10013 (make_restrict_type): Declare.
10015 2013-01-14 Tom Tromey <tromey@redhat.com>
10018 * psymtab.c (struct psymtab_state): New.
10019 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
10021 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
10022 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
10024 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
10025 Pedro Alves <palves@redhat.com>
10029 * remote.c (remote_threads_info): Make a copy of the reply from
10030 qfThreadInfo and use that instead of rs->buf.
10032 2013-01-14 Yao Qi <yao@codesourcery.com>
10034 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
10035 (dbx_psymtab_to_symtab): Likewise.
10036 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
10037 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
10038 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
10040 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
10042 * parse.c (parse_exp_in_context): New variable inner_chain. Call
10043 make_cleanup_restore_current_language. Call set_language. Move
10044 OLD_CHAIN and INNER_CHAIN cleanups.
10045 * utils.c (do_restore_current_language)
10046 (make_cleanup_restore_current_language): New functions.
10047 * utils.h (make_cleanup_restore_current_language): New declaration.
10049 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
10051 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
10052 non-existing files.
10054 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
10055 non-existing files if FILENAME is already absolute.
10057 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10059 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
10060 fputs_filtered. Append trailing newline.
10062 2013-01-11 Yao Qi <yao@codesourcery.com>
10063 Stan Shebs <stan@codesourcery.com>
10065 * psymtab.c (init_psymbol_list): Clarify the comment.
10067 2013-01-11 Yao Qi <yao@codesourcery.com>
10069 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
10070 (update_dprintf_command_list): Assert that 'printf_line' is
10071 non-null. Remove condition check.
10073 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
10076 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
10078 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
10080 * tui/tui-source.h (tui_source_is_displayed): Likewise.
10082 2013-01-09 Anthony Green <green@moxielogic.com>
10084 * cp-abi.c (cplus_print_vtable): Don't return value from void
10086 * ada-lang.c (re_set_catch_assert): Ditto.
10088 2013-01-09 Doug Evans <dje@google.com>
10090 * symfile.h (quick_symbol_functions): Delete member
10091 pre_expand_symtabs_matching. All uses removed.
10092 * dwarf2read.c (dw2_lookup_symbol): Implement.
10093 (dw2_do_expand_symtabs_matching): Delete.
10094 (dw2_pre_expand_symtabs_matching): Delete.
10095 (struct dw2_symtab_iterator): New type.
10096 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
10097 (dw2_expand_symtabs_for_function): Rewrite.
10098 (dwarf2_gdb_index_functions): Update.
10099 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
10100 (psym_functions): Update.
10102 2013-01-09 Tom Tromey <tromey@redhat.com>
10104 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
10105 * configure: Rebuild.
10106 * configure.ac: Add somread.o to the build if BFD has SOM
10108 * somread.c: Include som/aout.h, not syms.h.
10109 (som_symtab_read): Use som_external_symbol_dictionary_record.
10110 Unpack records manually.
10111 (_initialize_somread): Declare.
10113 2012-01-08 Mike Frysinger <vapier@gentoo.org>
10115 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
10116 Cast return_address to 64bits.
10118 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
10120 * printcmd.c: Remove define of function output_command.
10121 * tracepoint.c: Remove extern of function output_command.
10122 * valprint.h: (output_command): New extern.
10124 2013-01-07 Tom Tromey <tromey@redhat.com>
10126 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
10128 (objc_language_defn): Use c_printchar, c_printstr,
10131 2013-01-07 Tom Tromey <tromey@redhat.com>
10135 * ada-valprint.c (printstr, print_field_values): Remove
10137 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
10139 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
10141 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
10142 * main.c (captured_main): Remove "epoch" argument.
10143 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
10144 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
10145 * p-valprint.c (pascal_object_print_value_fields): Remove
10147 * printcmd.c (print_command_1): Remove 'inspect' argument.
10148 (print_command, call_command): Update.
10149 (inspect_command): Remove.
10150 (_initialize_printcmd): Make "inspect" an alias for "print".
10151 * top.c (epoch_interface): Remove.
10152 * top.h (epoch_interface): Remove.
10153 * valprint.c (user_print_options): Update.
10154 (print_converted_chars_to_obstack): Remove "inspect_it" code.
10155 * valprint.h (struct value_print_options) <inspect_it>: Remove
10158 2013-01-04 Tom Tromey <tromey@redhat.com>
10160 * valprint.h (read_string): Add 'extern'.
10162 2013-01-07 Joel Brobecker <brobecker@adacore.com>
10164 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
10165 used to decide whether to define darwin_read_dyld_info or not.
10167 2013-01-03 Pierre Muller <muller@sourceware.org>
10169 * main.c (relocate_gdb_directory): Avoid calling stat function
10172 2013-01-03 Yao Qi <yao@codesourcery.com>
10174 * psymtab.c (fixup_psymbol_section): Update declaration.
10175 (fixup_psymbol_section): Remove code returning value.
10177 2013-01-03 Yao Qi <yao@codesourcery.com>
10179 * symtab.h: Remove some out of date comments.
10180 (enum exception_event_kind): Move it ...
10181 * breakpoint.c: ... here.
10183 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
10186 * darwin-nat.c (darwin_read_dyld_info): Only build if
10187 TASK_DYLD_INFO_COUNT is defined.
10188 (darwin_xfer_partial): Call darwin_read_dyld_info only if
10189 TASK_DYLD_INFO_COUNT is defined.
10191 2013-01-02 Tom Tromey <tromey@redhat.com>
10193 * symfile.h (struct ecoff_debug_hack): Remove.
10194 * objfiles.c: Don't include mdebugread.h.
10196 2013-01-02 Tom Tromey <tromey@redhat.com>
10198 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
10199 * configure.ac: Check for Mach-O support in BFD. Update
10201 * configure: Rebuild.
10203 2013-01-02 Tom Tromey <tromey@redhat.com>
10205 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
10206 * configure.ac: Use GDB_AC_CHECK_BFD.
10207 * configure: Rebuild.
10209 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
10211 * MAINTAINERS: Update my email.
10213 2013-01-01 Joel Brobecker <brobecker@adacore.com>
10215 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
10217 2013-01-01 Joel Brobecker <brobecker@adacore.com>
10219 * rs6000-nat.c (bss_data_overlap): New function.
10220 (vmap_symtab): Use it to adjust the .bss section's offset.
10222 2013-01-01 Joel Brobecker <brobecker@adacore.com>
10224 Update year range in copyright notice of all files.
10226 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
10228 * top.c (print_gdb_version): Update copyright year.
10230 For older changes see ChangeLog-2012.
10236 version-control: never