1 Sat Mar 22 16:41:35 1997 Fred Fish <fnf@cygnus.com>
3 * remote-sim.c (simulator_command): Add comment about dealing with
6 * Makefile.in (tic80-tdep.o): Add target.
7 * configure.tgt: Add tic80 case.
8 * tic80-tdep.c: New file.
9 * config/tic80/{tic80.mt, tm-tic80.h}: New files.
12 Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
14 * c-exp.y (yylex): Handle nested template parameter lists.
15 * symtab.c (decode_line_2): Fix test for valid choice number.
17 Fri Mar 21 19:10:05 1997 Mark Alexander <marka@cygnus.com>
19 * mips-tdep.c (mips_push_arguments): On non-EABI architectures,
20 copy first two floating point arguments to general registers, so that
21 MIPS16 functions will receive the arguments correctly.
22 (mips_print_register): Print double registers correctly on
24 (mips_extract_return_value): Return double values correctly
25 on little-endian hosts.
27 * mdebugread.c (parse_procedure): Adjust address of procedure relative
28 to address in file descriptor record; this accounts for constant
29 strings that may precede functions in the text section. Remove
30 now-useless lowest_pdr_addr from argument list and all calls.
32 Fri Mar 21 15:36:25 1997 Michael Meissner <meissner@cygnus.com>
34 * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
35 whether the simulator will be built by whether the Makefile in the
36 simulator directory was built.
38 * configure.in (--enable-sim-powerpc): Delete switch.
39 * configure: Regenerate.
41 Thu Mar 20 20:52:04 1997 Jeffrey A Law (law@cygnus.com)
43 * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
46 * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
48 (gdb_os_evprintf_filtered): Similarly.
50 Wed Mar 19 16:13:22 1997 Geoffrey Noer <noer@pizza.cygnus.com>
52 New UnixWare 2.1 configuration
53 * config/i386/i386v42mp.mt: new
54 * config/i386/i386v42mp.mh: new
55 * config/i386/tm-i386v42mp.h: new
56 * config/i386/nm-i386v42mp.h: new
57 * configure.tgt: added new entries
58 * configure.host: added new entries
61 Wed Mar 19 15:16:17 1997 Martin M. Hunt <hunt@onions.cygnus.com>
63 * Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
65 * gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
66 to GDBTK_LIBRARY, which is now a path to search.
67 (gdb_path_conv): New function. Convert Cygwin32 pathname to
70 * {aclocal.m4,configure.in}: Changes for Windows builds.
75 Mon Mar 17 17:52:00 1997 J.T. Conklin <jtc@cygnus.com>
77 * dsrec.c (load_srec): Print leading zeroes when printing section
80 Mon Mar 17 15:00:16 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
82 * remote-sim.h: Delete - moved to ../include/remote-sim.h.
84 * Makefile.in (remote_utils_h): Update path to remote-sim.h.
86 Fri Mar 7 20:55:28 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
88 * remote-sim.c (flush_stdout, write_stderr, flush_stderr,
89 vprintf_filtered, evprintf_filtered): Callbacks that accept
92 Sat Mar 15 00:50:46 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
94 * breakpoint.c (insert_breakpoints, watchpoint_check,
95 bpstat_stop_status): Do not disable watchpoints going out of scope.
96 (insert_breakpoints): Make sure that the current frame is valid
97 before calling find_frame_addr_in_frame_chain.
99 * top.c (setup_user_args): Handle quotes and backslashes.
100 (print_gdb_version): Update copyright year.
102 Fri Mar 14 15:44:03 1997 Ian Lance Taylor <ian@cygnus.com>
104 * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
107 Fri Mar 14 10:01:29 1997 Tom Tromey <tromey@cygnus.com>
109 * configure: Regenerated.
110 * configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
113 Thu Mar 13 22:51:00 1997 Dawn Perchik <dawn@cygnus.com>
115 * utils.c (pollquit, notice_quit): If _WIN32, limit test for
117 (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols
118 except under wingdb. (Contributed by Martin Hunt).
120 Thu Mar 13 12:40:49 1997 Tom Tromey <tromey@cygnus.com>
122 * configure: Regenerated.
123 * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
125 Thu Mar 13 11:00:22 1997 Doug Evans <dje@canuck.cygnus.com>
127 * remote-sim.h (sim_state, SIM_DESC): New types.
128 (sim_open): Return a `descriptor' as result.
129 (*): New argument of descriptor result from sim_open.
130 * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
131 (gdbsim_open): Record result of sim_open in gdbsim_desc.
132 Pass argv list to sim_open, argv[0] = pseudo program name.
133 (*): Pass gdbsim_desc to sim_foo fns.
135 Wed Mar 12 14:40:06 1997 Tom Tromey <tromey@cygnus.com>
137 * config.in: Regenerated.
139 * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
140 HAVE_HPUX_THREAD_SUPPORT): Define.
143 Wed Mar 12 14:29:52 1997 Tom Tromey <tromey@cygnus.com>
145 * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
148 * configure: Regenerated.
149 * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
154 Tue Mar 11 07:25:27 1997 Mark Alexander <marka@cygnus.com>
156 First cut at supporting simulators in gdbserver:
158 * configure, configure.in: Allow gdbserver to be configured
159 for cross-target environments.
160 * gdbserver/Makefile.in: Add simulator support.
161 * gdbserver/configure.in: Eliminate assumption that host == target.
162 Simplify using gdb/configure.tgt and gdb/configure.host.
163 Fix other minor configuration errors.
164 * gdbserver/low-sparc.c: Fix compile error.
165 * gdbserver/remote-utils.c: Eliminate assumption that registers
166 and addresses are four bytes. Fix minor compile errors and warnings.
167 * gdbserver/server.c: Rewrite numerous instances of identical code
168 for starting inferior processes to call new function start_inferior.
169 Eliminate assumption that registers and addresses are four bytes.
170 * gdbserver/server.h: Add missing prototypes to eliminate compiler
172 * gdbserver/low-sim.c: New file to mate gdbserver with simulators.
173 * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
174 * config/i386/linux.mh: Eliminate gdbserver support as a first step
175 in moving such support from host to target makefile fragments.
176 * config/i386/linux.mt: Move gdbserver support here from linux.mh.
178 Mon Mar 10 12:27:47 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
180 * symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
181 to insure consistant initialization of unused fields to zero.
182 * symtab.c: replace initializations of sals with new macro INIT_SAL.
183 * breakpoint.c: ditto.
186 * source.c: add call to INIT_SAL macro.
188 Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
190 * sparc-tdep.c (isbranch): Always handle v9 branch instructions,
191 they might get used on 32 bit targets as well.
193 Wed Mar 5 19:34:09 1997 Bob Manson <manson@charmed.cygnus.com>
195 * remote-mips.c (mips_exit_debug): Some IDT boards don't
196 send the full exit string.
198 Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com)
200 * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
202 (mn10200_store_struct_return): Likewise.
204 Tue Mar 4 10:31:02 1997 Mark Alexander <marka@cygnus.com>
206 * mips-tdep.c (mips_fetch_instruction): New function; replace
207 common code throughout with calls to it.
208 (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
209 correct saved addresses of $s0 and $s1.
210 (mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE
211 instead of hardcoded 4.
212 (mips16_skip_prologue): Handle extended instructions correctly.
214 Mon Mar 3 12:29:20 1997 Doug Evans <dje@canuck.cygnus.com>
216 * defs.h (LONGEST): Move #ifndef LONGEST to outside.
217 Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
219 Thu Feb 27 18:54:11 1997 Mark Alexander <marka@cygnus.com>
221 * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
222 New macros for testing, setting, and clearing bit 0 of addresses.
223 Change numerous bits of code where bit 0 was being manipulated
226 Thu Feb 27 14:12:41 1997 Mark Alexander <marka@cygnus.com>
228 * remote-mips.c: Put back the form feeds.
230 Thu Feb 27 12:04:24 1997 Mark Alexander <marka@cygnus.com>
232 * remote-mips.c: Remove form feeds (^L) from source.
233 (mips_initialize): LSI PMON doesn't support 'set regsize' command.
234 (pmon_wait): Don't need to exit and re-enter debug mode on LSI
235 PMON after a continue; it causes target program misbehavior.
236 (mips_fetch_register): Don't fetch unsupported registers; this
237 cuts down on wasted serial traffic.
239 Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com)
241 * configure.in configure (HPUX/OSF thread support): Enable this
242 only when running GCC, since HP's thread header files use ANSI C
243 which is not supported by their default compiler.
245 * configure.host (i[3456]86-*-windows): Disable long long
246 support for WinGDB. Add mswin to configdirs.
247 * configure.in configure: Move calls to configure.host and
248 configure.tgt to the top of configure.in to allow them to set
249 config variables before they are referenced.
251 Tue Feb 25 20:21:52 1997 Stan Shebs <shebs@andros.cygnus.com>
253 * configure.tgt (mips*-*-lnews*): New target.
255 Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com)
257 * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
258 if we're not the innermost frame. Fix minor typos.
260 Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
262 * stabsread.c (read_type): Fix handling of template names
263 with template parameters containing `::'.
265 * valops.c (search_struct_field, search_struct_method):
266 Pass correct valaddr parameter to baseclass_offset.
267 Prevent gdb crashes by making sure that the virtual base pointer
268 from an user object still points to accessible memory.
270 Tue Feb 18 13:36:34 1997 Mark Alexander <marka@cygnus.com>
272 * maint.c: Eliminate -Wall warnings by including some header files.
274 Tue Feb 18 13:06:30 1997 Mark Alexander <marka@cygnus.com>
276 * remote-sim.c (init_callbacks): Undo previous change.
278 Tue Feb 18 11:13:00 1997 Dawn Perchik <dawn@cygnus.com>
280 * maint.c: Fix dereference of pointer.
281 * remote-sim.c: Fix reference of structure member "last_error".
282 * debugify.c: Include config.h to get ANSI definitions.
284 Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
286 * remote-vx.c (vx_attach): Fix for PR 11356. Remove code added
287 by kung. It made no sense.
289 Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
291 * main.c (print_gdb_help): Make static to match declaration.
293 Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
295 * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
297 Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
299 * debugify.c, debugify.h: Make safe for non-ansi compilers.
301 Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
303 * defs.h: Fix prototypes for new cleanup functions.
305 Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
307 * debugify.c, debugify.h: Fix for general gnu use. Remove C++
308 comment, add PARAMS, add license info and fix indentation.
310 Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
312 * debugify.c, debugify.h: New files. Provide common macros
313 for writing debug info to a log file or stdio.
315 Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
317 * c-valprint.c (c_val_print): Fix printing for arrays defined
318 with 0 length. A sticky tag caused this fix from
319 revision 2.32 date: 1996/04/29 23:25:27; author: dawn;
320 state: Exp; lines: +1 -0 branches: 2.32.34;
321 to not make it into devo.
323 Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
325 * defs.h: Fix cntl-C to read from the Windows message queue.
326 Add prototypes for make_final_cleanup (and the other cleanup
328 * remote-e7000.c: Fix sync code to timeout if unable to sync.
329 Change sync code to report status while trying to sync-up
330 with hardware. Add debugging output and document.
331 * ser-e7kpc.c: Swap order of len & offset to match implementation.
332 Add debugging output and document.
333 * serial.c: Add debugging output.
334 * top.c: Add call to do_final_cleanups.
335 Remove conditionals preventing Win32 from getting SIGQUIT.
336 * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
337 chain as a parameter. Extract this generic code from the cleanup
338 routines into separate funtions (*_my_cleanup). Keep old
339 functionality by passing "cleanup_chain" to the new funtions.
340 Define the cleanup chain "final_cleanup_chain" to be a cleanup
341 chain which will be executed only when gdb exits. Add functions
342 (*_final_cleanup) to match the original (*_cleanup) functions.
343 (pollquit, quit, notice_quit): Fix to read cntl-C from the
344 Windows message queue.
347 Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
349 * m32r-rom.c: #include <sys/types.h>.
350 #ifdef out new load support if wingdb.
351 * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
354 Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
357 * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
358 * mn10200-tdep.c (mn10200_store_struct_return): New function.
360 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
361 extracting a return value from a register pair.
363 * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
364 be two byte aligned. Round argument sizes up to two byte boundary.
365 Write out args in two byte hunks.
366 (mn10200_push_return_address): Implement.
367 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
368 structures > 8 bytes (temporary).
369 (STORE_RETURN_VALUE): Likewise.
370 (CALL_DUMMY): No longer undefine.
371 (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
372 (REG_STRUCT_HAS_ADDR): Define.
375 Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
377 * configure.tgt: added r5900.
380 Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
382 * mips-tdep.c (non_heuristic_proc_desc): New function.
383 (find_proc_desc): Move non-heuristic proc search code into separate
385 (gdb_print_insn_mips): Use non-heuristic method to find procedure
386 descriptor, to avoid prologue examination when disassembling.
387 * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
388 aka MicroMeteor board).
389 (mips_exit_debug): Prevent protocol reinitialization if an error
390 occurs while exiting debug mode.
392 Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
394 * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
395 comments, formatting, etc. Plus other minor fixes for problems
396 I found during my first pass over the mn10200 port.
397 (mn10200_analyze_prologue): New function.
398 (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
399 * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
400 comments, formatting, etc. Minor fixes for problems I found during
401 my first pass over the mn10200 port.
402 (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
404 (REGISTER_VIRTUAL_TYPE): Define as a long.
405 (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
407 (STORE_RETURN_VALUE): Similarly.
409 * blockframe.c (generic_get_saved_regs): Remove unused variable
411 * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
412 inside #ifdef CALL_DUMMY.
413 (watch_command_1): Initialize target_resources_ok.
414 * command.c (do_setshow_command): Provide dummy initialization
416 * valops.c (find_function_addr): Move function & prototype inside
418 (value_arg_coerce): Similarly.
419 (value_of_variable): Provide dummy initialization of "frame".
421 Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
423 * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
424 This fixes PR 11323, where gdbtk stops responding if an error occurs.
426 Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
428 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
429 to prim_record_minimal_symbol_and_info call that was missed in Jan 3
431 (scan_xcoff_symtab): Ditto.
433 Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
435 * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
436 from being sent to 32-bit targets by masking off upper bits.
437 * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
438 of PC on 32-bit targets.
439 (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
440 frame setup instruction.
441 (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
442 (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
443 prologue instruction. Fix warnings and bugs found by gcc -Wall.
444 * buildsym.c (finish_block): Improve handling of overlapping blocks;
445 fixes problem on MIPS16 printing function arguments.
447 Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
449 * dwarf2read.c (dwarf2_linkage_name): New function to get
450 the linkage name of a die from DW_AT_MIPS_linkage_name or
452 (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
453 new_symbol): Use it instead of accessing DW_AT_name.
454 (read_partial_die): Use DW_AT_MIPS_linkage name as name of the
455 partial die if present.
456 (dwarf2_add_member_fn): Make a copy of physname on the type obstack.
458 Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
460 * blockframe.c (generic_frame_chain_valid): If the new frame
461 is not INNER_THAN the old frame, then it's not valid.
463 Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
465 * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
466 (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
468 Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
470 * mips-tdep.c (mips16_decode_reg_save): Distinguish between
471 sd and sw instructions correctly.
472 (heuristic_proc_start): Add support for MIPS16.
473 (mips16_get_imm, mips16_heuristic_proc_desc,
474 mips32_heuristic_proc_desc): New helper functions for
476 (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
477 (mips_push_arguments): Don't align small arguments in EABI.
478 (mips32_skip_prologue): Attempt to shrink code size a little.
481 Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
483 * m32r-stub.c: New -- remote protocol support for M32R cpu.
484 * m32r-rom.c: Several experiments with improved download time.
485 * .Sanitize: Add entry for m32r-stub.c
488 Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
490 * mips-tdep.c (MIPS16_INSTLEN): Define.
491 (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
492 (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
493 of function on MIPS16.
494 (mips32_skip_prologue, mips16_skip_prologue): New helper functions
495 for mips_skip_prologue.
496 (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
498 Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
500 * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
501 ../sim/common/libcommon.a.
503 Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
505 * blockframe.c: fix a null pointer ref in generic_get_saved_register
507 Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
509 * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
512 Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
514 First set of changes for mips16:
515 * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
516 MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
517 (ABOUT_TO_RETURN): Call new function mips_about_to_return.
518 (mips_breakpoint_from_pc, mips_about_to_return): Declare.
519 * mem-break.c (memory_breakpoint_from_pc): New function.
520 (memory_insert_breakpoint, memory_remove_breakpoint): Use
521 memory_breakpoint_from_pc to determine breakpoint contents and size.
522 * target.h (memory_breakpoint_from_pc): Declare.
523 * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
524 to determine size of breakpoint instruction.
525 * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
526 New helper functions for mips_find_saved_regs.
527 (mips_find_saved_regs): Recognize mips16 prologues.
528 (mips_addr_bits_remove): Strip off upper 32 bits of address
529 when target CPU is 32 bits but CORE_ADDR is 64 bits.
530 (mips_step_skips_delay): No branch delay slot on mips16.
531 (gdb_print_insn_mips): Disassemble mips16 code.
532 (mips_breakpoint_from_pc, mips_about_to_return): New functions.
534 Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
536 * tm-mn10200.h (NUM_REGS): Decrease to 12.
537 (REGISTER_NAMES): Elimination registers not found on the mn10200.
538 (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
539 (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
541 Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
543 * dwarf2read.c: Replace integral tag, name and form fields in
544 internal structure definitions with the corresponding enumeration
545 types from dwarf2.h. Add default cases to switches on enumerations
547 Make quoting of string arguments in complaint messages consistent.
548 Check for NULL returns from DW_STRING.
549 (struct partial_die_info): Add sibling and has_type fields, remove
551 (DW_*): Move access macro definitions near the definition of the
553 (struct field_info): New structure to pass information about fields
554 and member functions between die processing routines.
555 (dwarf2_build_psymtabs_hard): Set cu_header_offset.
556 (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
557 the partial symbol table if the DW_AT_*_pc attributes are missing.
558 Add file scope base type definitions to the partial symbol table.
559 Skip over child dies if the die has a sibling attribute.
560 (add_partial_symbol): Enter global variables with type attributes
561 and without location descriptors into the partial symbol table.
562 Store value of DW_TAG_variable dies in the partial symbol table.
563 Do not enter global variables into the minimal symbol table.
564 Add base type definitions to the partial symbol table.
565 (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
566 (process_die): Move check for DW_AT_low_pc to read_func_scope.
567 Add a typedef symbol for base type definitions to the symbol table.
568 Ignore DW_TAG_inlined_subroutine tags for now.
569 (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
570 (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
571 to determine pc bounds, ignore dies with invalid bounds.
572 (dwarf2_get_pc_bounds): New routine to extract and validate the
573 DW_AT_*_pc attributes of a die.
574 (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
575 dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
576 New functions to handle fields and member functions.
577 (read_structure_scope): Rewritten to use them.
578 (read_array_type): Renamed from dwarf_read_array_type.
579 Default upper array bound to describe an array with unspecified
581 Create array types in backwards order, as dwarf2 puts out the array
582 dimensions from left to right.
583 (read_subroutine_type): Handle DW_TAG_unspecified_parameters,
584 DW_AT_artificial and DW_AT_prototyped.
585 (read_base_type): Make an unsigned type for DW_ATE_boolean.
586 Pass objfile to dwarf_base_type.
587 (read_partial_die): Use read_attribute to read in the attributes.
588 Handle DW_AT_sibling and DW_AT_type.
589 Follow references when determining DW_AT_name and DW_AT_external
590 attributes of the die.
591 Validate DW_AT_*_pc attributes.
592 (read_full_die): Use read_attribute to read in the attributes.
593 (read_attribute): New function to read an attribute described
594 by an abbreviated attribute.
595 (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
596 Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
597 SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
598 Change symbol class for global variables with a zero valued location
599 descriptor to LOC_UNRESOLVED.
600 Handle DW_AT_const_value attributes for DW_TAG_variable,
601 DW_TAG_formal_parameter and DW_TAG_enumerator.
602 Build a typedef symbol for DW_TAG_base_type.
603 (dwarf2_const_value): New routine to copy a constant value from an
604 attribute to a symbol.
605 (dwarf_base_type): Use passed in objfile, not current_objfile
606 when calling dwarf2_fundamental_type.
607 (dump_die): Use DW_* accessor macros to access values of attributes.
608 (decode_locdesc): Handle DW_OP_plus_uconst.
610 Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
612 * mn10200-tdep.c: New file.
613 * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
614 SP_REGNUM and FP_REGNUM are different, also no lar or lir.
615 * config/mn10200/mn10200.mt: New file.
616 * configure.tgt: add mn10200 entry.
618 Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
620 * configure.in configure: Check if host has libdl if doing
623 Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
625 * mn10300-tdep.c: Wrote/fixed implementations of
626 mn10300_frame_chain, mn10300_init_extra_frame_info,
627 mn10300_frame_saved_pc
628 * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
629 and INIT_FRAME_PC macros.
631 Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
633 * configure.in configure: Check if host has libm. Make sure we
634 are using gcc when using the -export-dynamic option. Fixes a
635 problem with building under Solaris/SunPro cc.
637 Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
639 * config/mips/{embed,embed64,embedl,embedl64}.mt:
640 Link in simulator on MIPS embedded targets.
642 Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
644 * blockframe.c (frameless_look_for_prologue): Mark frames
645 with a zero PC as frameless to improve backtraces from core dumps
646 caused by dereferencing a NULL function pointer.
648 Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
650 * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
652 Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
654 * mn10300-tdep.c: made a lot more generic, ripping out code
655 from copied target (no more mn10300_scan_prologue,
656 init_extra_frame_info, and mn10300_fix_call_dummy calls)
657 * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
658 and INIT_FRAME_PC macros
660 Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
662 * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
663 FP_REGISTER_BYTES to compute offsets into the saved frame,
664 since it fails for SPARC targets configured without any
665 FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
667 Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
669 * symtab.c (fixup_symbol_section): Handle NULL symbols without
672 Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
674 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
675 ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
677 * configure configure.in: Clean up test cases around thread support.
679 * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
682 * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
683 printcmd.c valops.c value.h values.c: Add bfd_section arg to
684 value_at and value_at_lazy.
685 * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
686 Add bfd_section arg to prim_record_minimal_symbol_and_info.
687 * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
688 instead of read_memory. It takes a bfd_section arg.
689 * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
690 unnecessary cast for assignment of struct dbx_symfile_info.
691 Struct objfile now uses a real pointer instead of PTR for this
693 * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
694 text, data and bss into dbx_symfile_info.
695 * exec.c (xfer_memory): Handle transfers for user-specified
697 * findvar.c (read_var_value locate_var_value): Copy bfd section
698 from the symbol to the value.
699 * gdb-stabs.h: Add section pointers for text, data and bss
701 * maint.c (translate address command): Add test code for overlay
703 * printcmd.c (do_examine do_one_display): Now takes a bfd section
705 * (print_formatted x_command): Record current section along with
706 current address for repeated commands.
707 * sparc-nat.c (fetch_inferior_registers): Change
708 target_xfer_memory to target_{read write}_memory to allow changes
709 to target_xfer_memory interface for section info.
710 * symmisc.c (dump_msymbols print_symbol): Print section
711 assocaited with symbol.
712 * symtab.c (fixup_symbol_section): New routine to
713 add section info to symbols returned by lookup_symbol.
714 * symtab.h (struct general_symbol_info): Add bfd section to
716 * target.c target.h (target_xfer_memory): Add bfd section to
718 * (target_read_memory_section): New routine to read data from a
720 * (target_memory_bfd_section): New global variable to pass bfd
721 section in to targets.
722 * valarith.c (value_add value_addr value_array): Preserve bfd
723 section when computing new value.
724 * value.h (struct value): Add bfd section to values.
725 * values.c (allocate_value value_copy): Initialize/preserve bfd
727 * (unpack_double): Clean up _MSC_VER conditionals to remove
730 * v850ice.c: New module to support communication with NEC's
732 * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
733 ep names with rxx names. sp and fp are renamed via a different
737 Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
739 * mn10300-tdep.c (mn10300_push_arguments): rewrote,
740 also removed code elsewhere that made use of RP_REGNUM.
741 * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
742 ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
743 arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
744 EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
746 For older changes see ChangeLog-96
752 version-control: never