1 2013-11-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3 * NEWS (Changes in GDB 7.5) (New commands) (explore): Fix typo.
5 2013-11-15 Andreas Arnez <arnez@linux.vnet.ibm.com>
7 * dwarf2loc.c (chain_candidate): Prevent invoking memcpy with
10 2013-11-15 Tom Tromey <tromey@redhat.com>
13 * c-exp.y (lex_one_token): Add "is_quoted_name" argument.
14 (classify_name): Likewise. Prefer a field of "this" over a
16 (classify_inner_name, yylex): Update.
18 2013-11-15 Joel Brobecker <brobecker@adacore.com>
20 * dwarf2expr.h (struct dwarf_expr_context_funcs) <read_reg>:
21 Extend the documentation a bit.
22 <get_reg_value>: New field.
23 * dwarf2loc.c (dwarf_expr_get_reg_value)
24 (needs_frame_get_reg_value): New functions.
25 (dwarf_expr_ctx_funcs, needs_frame_ctx_funcs): Add "get_reg_value"
27 * dwarf2-frame.c (get_reg_value): New function.
28 (dwarf2_frame_ctx_funcs): Add "get_reg_value" callback.
29 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_regval_type>:
30 Use new callback to compute result_val.
32 2013-11-15 Alan Modra <amodra@gmail.com>
34 * ppc64-tdep.c (ppc64_plt_entry_point): Renamed from..
35 (ppc64_desc_entry_point): ..this. Update comments here and at
37 (ppc64_standard_linkage1, ppc64_standard_linkage2,
38 ppc64_standard_linkage3): Update comments.
39 (ppc64_standard_linkage4, ppc64_standard_linkage5,
40 (ppc64_standard_linkage6, ppc64_standard_linkage7): New insn
42 (ppc64_standard_linkage4_target): New function.
43 (ppc64_skip_trampoline_code): Skip ELFv2 patterns too.
44 * rs6000-tdep.c (skip_prologue): Skip ELFv2 r2 setup. Correct
45 nop match. Fix comment wrap.
47 2013-11-14 Pedro Alves <palves@redhat.com>
49 * infrun.c (handle_signal_stop): Move STOP_QUIETLY,
50 STOP_QUIETLY_REMOTE and 'stop_after_trap' handling earlier.
52 2013-11-14 Pedro Alves <palves@redhat.com>
54 * infrun.c (struct execution_control_state)
55 <stepped_after_stopped_by_watchpoint>: New field.
56 (get_inferior_stop_soon): New function.
57 (handle_inferior_event): 'stepped_after_stopped_by_watchpoint' was
58 moved to struct execution_control_state -- adjust. Use
59 get_inferior_stop_soon. Split TARGET_WAITKIND_STOPPED handling to
61 (handle_signal_stop): New function, factored out from
62 handle_inferior_event.
64 2013-11-14 Pedro Alves <palves@redhat.com>
66 * break-catch-sig.c (signal_catchpoint_explains_signal): Adjust to
68 * breakpoint.c (bpstat_explains_signal): Adjust to return a
70 (explains_signal_watchpoint, base_breakpoint_explains_signal):
71 Adjust to return a boolean.
72 * breakpoint.h (enum bpstat_signal_value): Delete.
73 (struct breakpoint_ops) <explains_signal>: New returns a boolean.
74 (bpstat_explains_signal): Likewise.
75 * infrun.c (handle_inferior_event) <random signal checks>:
76 bpstat_explains_signal now returns a boolean - adjust. No longer
77 consider hiding signals.
79 2013-11-14 Pedro Alves <palves@redhat.com>
81 * breakpoint.c (bpstat_explains_signal) <Moribund locations>:
82 Return BPSTAT_SIGNAL_PASS instead of BPSTAT_SIGNAL_HIDE.
83 (explains_signal_watchpoint): Return BPSTAT_SIGNAL_PASS instead of
85 (base_breakpoint_explains_signal): Return BPSTAT_SIGNAL_PASS
86 instead of BPSTAT_SIGNAL_HIDE.
87 * infrun.c (handle_inferior_event): Rework random signal checks.
89 2013-11-14 Pedro Alves <palves@redhat.com>
91 * infrun.c (struct execution_control_state): Remove
92 'random_signal' field.
93 (handle_syscall_event): Use bpstat_causes_stop instead of
94 bpstat_explains_signal. Don't set ecs->random_signal.
95 (handle_inferior_event): New 'random_signal' local.
96 <TARGET_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED,
97 TARGET_WAITKIND_EXECD>: Use bpstat_causes_stop instead of
98 bpstat_explains_signal. Don't set ecs->random_signal.
99 <TARGET_WAITKIND_STOPPED>: Adjust to use local instead of
102 2013-11-14 Pedro Alves <palves@redhat.com>
104 * infrun.c (handle_inferior_event): Move comment from the
105 function's body to the function's description, adjusted.
107 2013-11-14 Pedro Alves <palves@redhat.com>
109 * infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>:
110 Handle STOP_QUIETLY_NO_SIGSTOP and STOP_QUIETLY_REMOTE here.
111 Assert we never fall through out of the TARGET_WAITKIND_LOADED
114 2013-11-14 Tom Tromey <tromey@redhat.com>
116 * python/py-linetable.c (ltpy_has_line)
117 (ltpy_get_all_source_lines): Fix loop termination condition.
119 2013-11-14 Joel Brobecker <brobecker@adacore.com>
121 * mi/mi-parse.h (struct mi_parse) <language>: New field.
122 * mi/mi-main.c (mi_cmd_execute): Temporarily set language to
123 PARSE->LANGUAGE during command execution, if set.
124 * mi/mi-parse.c: Add "language.h" #include.
125 (mi_parse): Add parsing of "--language" command option.
127 * NEWS: Add entry mentioning the new "--language" command option.
129 2013-11-14 Pedro Alves <palves@redhat.com>
130 Joel Brobecker <brobecker@adacore.com>
132 * cli/cli-utils.h (extract_arg_const): Add declaration.
133 * cli/cli-utils.c (extract_arg_const): New function.
134 (extract_arg): Reimplement using extract_arg_const.
136 2013-11-14 Joel Brobecker <brobecker@adacore.com>
138 * language.h: Add "symtab.h" #include.
140 2013-11-13 Doug Evans <xdje42@gmail.com>
142 * breakpoint.c (bpstat_check_breakpoint_conditions): For thread
143 specific breakpoints, don't evaluate breakpoint condition if
146 2013-11-13 Keith Seitz <keiths@redhat.com>
150 * cp-support.c (insepct_type): Add support for substituting
151 namespace aliases, too.
152 * dwarf2read.c (scan_partial_symbols): Add a partial symbol
153 for DW_TAG_imported_declaration.
154 (add_partial_symbol): Likewise.
155 (process_die): Handle namespace aliases with
156 read_namespace_alias.
157 (die_needs_namespace): Add DW_TAG_imported_declaration.
158 (read_namespace_alias): New function.
159 (load_partial_dies): Load DW_TAG_imported_declaration, too.
160 (new_symbol_full): Handle DW_TAG_imported_declaration.
162 2013-11-13 Keith Seitz <keiths@redhat.com>
164 * p-exp.y (uptok): Make first parameter const.
165 (yylex): Make `tokstart' and `tokptr' const.
166 Don't copy the lexer input to a temporary buffer.
168 Remove const workaround for parse_escape.
169 Create a temporary buffer for a convenience variable instead
170 of doing in-place modification of the input.
171 If a match is found with a different case from the input,
172 do not change the input at all.
173 Use `tmp' to construct the resultant stoken instead of
176 2013-11-13 Doug Evans <xdje42@gmail.com>
178 * breakpoint.c (breakpoint_cond_eval): Fix and enhance comment.
180 2013-11-13 Joel Brobecker <brobecker@adacore.com>
182 * mi/mi-main.c (mi_cmd_list_features): Replace "info-ada-exceptions"
183 entry with "ada-exceptions".
185 2013-11-13 Joel Brobecker <brobecker@adacore.com>
187 * symfile.c (reread_symbols): Move call to set_objfile_per_bfd
188 after re-initialization of OBJFILE's obstack.
190 2013-11-12 Doug Evans <xdje42@gmail.com>
192 * breakpoint.c (bpstat_check_breakpoint_conditions): Assert
193 bs->stop != 0 on entry. Update function comment. Simplify early
194 exit for frame mismatch. Reindent rest of function.
196 2013-11-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
198 * objc-lang.c (uniquify_strings): Prevent invoking qsort with
201 2013-11-12 Doug Evans <dje@google.com>
203 Work around gold/15646.
204 * dwarf2read.c (read_index_from_section): Update comment.
205 (struct dw2_symtab_iterator): New member global_seen.
206 (dw2_symtab_iter_init): Initialize it.
207 (dw2_symtab_iter_next): Skip duplicate global symbols.
208 (dw2_expand_symtabs_matching): Ditto.
210 2013-11-12 Joel Brobecker <brobecker@adacore.com>
212 * mi/mi-cmds.h (mi_cmd_info_ada_exceptions): Add declaration.
213 * mi/mi-cmds.c (mi_cmds): Add entry for -info-ada-exceptions
215 * mi/mi-cmd-info.c: #include "ada-lang.c" and "arch-utils.c".
216 (mi_cmd_info_ada_exceptions): New function.
217 * mi/mi-main.c (mi_cmd_list_features): Add "info-ada-exceptions".
219 2013-11-12 Joel Brobecker <brobecker@adacore.com>
221 * ada-lang.h: #include "vec.h".
222 (struct ada_exc_info): New.
223 (ada_exc_info): New typedef.
224 (DEF_VEC_O(ada_exc_info)): New vector.
225 (ada_exceptions_list): Add declaration.
226 * ada-lang.c (ada_is_exception_sym)
227 (ada_is_non_standard_exception_sym, compare_ada_exception_info)
228 (sort_remove_dups_ada_exceptions_list)
229 (ada_exc_search_name_matches, ada_add_standard_exceptions)
230 (ada_add_exceptions_from_frame, ada_add_global_exceptions)
231 (ada_exceptions_list_1, ada_exceptions_list)
232 (info_exceptions_command): New function.
233 (_initialize_ada_language): Add "info exception" command.
235 2013-11-11 Phil Muldoon <pmuldoon@redhat.com>
238 * NEWS: Add linetable feature.
239 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-linetable entries.
240 * python/py-linetable.c: New file.
241 * python/py-symtab.c (stpy_get_linetable): New function.
242 * python/python-internal.h (symtab_to_linetable_object): Declare.
243 (gdbpy_initialize_linetable): Ditto.
244 * python/python.c (_initialize_python): Call
245 gdbpy_initialize_linetable.
247 2013-11-11 Joel Brobecker <brobecker@adacore.com>
249 * ada-lang.c (create_ada_exception_catchpoint): Enhance
250 the documentation of fields "except_string" and "condition".
251 * mi/mi-cmd-catch.c (mi_cmd_catch_assert): Reallocate
252 CONDITION on the heap before passing it to
253 create_ada_exception_catchpoint.
254 (mi_cmd_catch_exception): Likewise for EXCEPTION_NAME and
257 2013-11-11 Tom Tromey <tromey@redhat.com>
259 * config.in, configure: Rebuild.
260 * configure.ac (HAVE_TKILL_SYSCALL): Check for "syscall".
262 2013-11-11 Joel Brobecker <brobecker@adacore.com>
264 * remote-sim.c (gdbsim_detach): Break declaration into
265 shorter lines. No code change.
267 2013-11-11 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
269 * remote-sim.c (gdbsim_detach): Fix prototype.
271 2013-11-08 Doug Evans <dje@google.com>
273 * dwarf2read.c (dwarf2_read_debug): Change to unsigned int.
274 (create_debug_types_hash_table): Only print debugging messages for
275 each TU if dwarf2-read >= 2.
276 (process_queue): Ditto.
277 (_initialize_dwarf2_read): Make "set debug dwarf2-read" a zuinteger.
280 2013-11-08 Tom Tromey <tromey@redhat.com>
282 * configure: Rebuild.
283 * configure.ac: Remove mentions of HAVE_MULTIPLE_PROC_FDS.
285 2013-11-08 Tom Tromey <tromey@redhat.com>
287 * configure, config.in: Rebuild.
288 * configure.ac: Remove unused configury.
290 2013-11-08 Tom Tromey <tromey@redhat.com>
292 * m32c-tdep.c: Use gdb_string.h.
294 2013-11-08 Tom Tromey <tromey@redhat.com>
296 * configure, config.in: Rebuild.
297 * configure.ac: Remove all link.h-related checks.
299 2013-11-08 Tom Tromey <tromey@redhat.com>
301 * acinclude.m4: Include common.m4.
302 * common/common.m4: New file.
303 * configure, config.in: Rebuild.
304 * configure.ac: Use GDB_AC_COMMON.
306 2013-11-08 Doug Evans <dje@google.com>
308 * NEWS: Mention that "set debug symtab-create" now accepts a
310 * buildsym.c (end_symtab_from_static_block): Call set_symtab_primary
311 to set the symtab's primary flag.
312 * jit.c (finalize_symtab): Ditto.
313 * mdebugread.c (psymtab_to_symtab_1): Ditto.
314 * symfile.c (allocate_symtab): Only print debugging messages for
315 symtab_create_debug levels 2 and higher.
316 * symtab.c (symtab_create_debug): Change type to unsigned int.
317 (set_symtab_primary): New function.
318 (_initialize_symtab): Change "set debug symtab-create" to a
320 * symtab.h (set_symtab_primary): Declare.
321 (symtab_create_debug): Update decl.
323 2013-11-08 Tom Tromey <tromey@redhat.com>
325 * aix-thread.c (aix_thread_detach): Update.
326 * corelow.c (core_detach): Update.
327 * darwin-nat.c (darwin_detach): Update.
328 * dec-thread.c (dec_thread_detach): Update.
329 * gnu-nat.c (gnu_detach): Update.
330 * go32-nat.c (go32_detach): Update.
331 * inf-ptrace.c (inf_ptrace_detach): Update.
332 * inf-ttrace.c (inf_ttrace_detach): Update.
333 * linux-fork.c (linux_fork_detach): Update.
334 * linux-fork.h (linux_fork_detach): Update.
335 * linux-nat.c (linux_nat_detach): Update. Introduce "tem"
336 local for const-correctness.
337 * linux-thread-db.c (thread_db_detach): Update.
338 * monitor.c (monitor_detach): Update.
339 * nto-procfs.c (procfs_detach): Update.
340 * procfs.c (procfs_detach): Update.
341 * record.c (record_detach): Update.
342 * record.h (record_detach): Update.
343 * remote-m32r-sdi.c (m32r_detach): Update.
344 * remote-mips.c (mips_detach): Update.
345 * remote-sim.c (gdbsim_detach): Update.
346 * remote.c (remote_detach_1, remote_detach)
347 (extended_remote_detach): Update.
348 * sol-thread.c (sol_thread_detach): Update.
349 * target.c (target_detach): Make "args" const.
350 (init_dummy_target): Update.
351 * target.h (struct target_ops) <to_detach>: Make argument const.
352 (target_detach): Likewise.
353 * windows-nat.c (windows_detach): Update.
355 2013-11-07 Doug Evans <dje@google.com>
358 * solib-svr4.c (svr4_exec_displacement): Ignore filesz, memsz, flags
359 and align fields for PT_GNU_RELRO segments.
361 2013-11-07 Phil Muldoon <pmuldoon@redhat.com>
364 * python/py-cmd.c: Add COMPLETE_EXPRESSION constant.
366 2013-11-07 Phil Muldoon <pmuldoon@redhat.com>
368 * NEWS: Document Python temporary breakpoint support.
369 * python/py-breakpoint.c (bppy_get_temporary): New function.
370 (bppy_init): New keyword: temporary. Parse it and set breakpoint
371 to temporary if True.
373 2013-11-07 Jose E. Marchesi <jose.marchesi@oracle.com>
375 * sparc-tdep.c (sparc_analyze_control_transfer): Assertion
376 removed to allow analyzing unconditional branch instructions
377 with PC-relative offsets of zero.
379 2013-11-07 Yao Qi <yao@codesourcery.com>
381 * mi/mi-cmd-var.c: Include "language.h".
382 (mi_cmd_var_info_expression): Get language name from
384 * varobj.c (varobj_language_string): Remove.
385 (variable_language): Remove declaration.
387 (varobj_get_language): Change the type of return value.
388 (variable_language): Remove.
389 * varobj.h (enum varobj_languages): Remove.
390 (varobj_language_string): Remove declaration.
391 (varobj_get_language): Update declaration.
393 2013-11-07 Yao Qi <yao@codesourcery.com>
395 * language.h (struct language_defn) <la_natural_name>: New
397 * ada-lang.c (ada_language_defn): Initialize field
399 * c-lang.c (c_language_defn): Likewise.
400 (cplus_language_defn, asm_language_defn): Likewise.
401 * d-lang.c (d_language_defn): Likewise.
402 * f-lang.c (f_language_defn): Likewise.
403 * go-lang.c (go_language_defn): Likewise.
404 * jv-lang.c (java_language_defn): Likewise.
405 * language.c (unknown_language_defn ): Likewise.
406 (auto_language_defn): Likewise.
407 * m2-lang.c (m2_language_defn): Likewise.
408 * objc-lang.c (objc_language_defn): Likewise.
409 * opencl-lang.c (opencl_language_defn): Likewise.
410 * p-lang.c (pascal_language_defn): Likewise.
412 2013-11-07 Yao Qi <yao@codesourcery.com>
414 * language.c (language_str): Return const char *.
415 (add_language): Add const to 'language_names'
416 * language.h (struct language_defn) <la_name>: Add const.
417 (language_str: Update declaration.
419 2013-11-06 Andreas Arnez <arnez@linux.vnet.ibm.com>
421 * s390-linux-nat.c (s390_read_description): Consider the TE field
422 in the HWCAP for determining 'have_regset_tdb'.
424 2013-11-06 Will Newton <will.newton@linaro.org>
427 * dwarf2read.c (skip_one_die): Sanity check DW_AT_sibling
428 values. (read_partial_die): Likewise.
430 2013-11-06 Muhammad Bilal <mbilal@codesourcery.com>
433 * top.c (command_line_input): Unify interactivity tests to use
434 input_from_terminal_p.
435 * event-top.c (command_line_handler): Likewise.
437 2013-11-06 Yao Qi <yao@codesourcery.com>
439 * Makefile.in (check-perf): New target.
441 2013-11-05 Will Newton <will.newton@linaro.org>
444 * arm-tdep.c (print_fpu_flags): Use filtered output routines.
445 (arm_print_float_info): Likewise.
447 2013-11-04 Anton Blanchard <anton@samba.org>
449 * target.c (memory_xfer_partial): Cap write to 4KB.
451 2013-11-01 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
453 * breakpoint.c (create_longjmp_master_breakpoint): Allow libc
454 probe scan even when the arch provides no get_longjmp_target.
456 2013-10-31 Pedro Alves <palves@redhat.com>
458 * infrun.c (handle_syscall_event): Don't set or clear stop_signal.
459 (handle_inferior_event) <TARGET_WAITKIND_FORKED,
460 TARGET_WAITKIND_VFORKED>: Don't set stop_signal to
461 GDB_SIGNAL_TRAP, or clear it. Pass GDB_SIGNAL_0 to
462 bpstat_explains signal, instead of GDB_SIGNAL_TRAP.
463 <bpstat handling>: If the bpstat chain wants the signal to be
464 hidden, then set stop_signal to GDB_SIGNAL_0 instead of
467 2013-10-31 Andrew Burgess <aburgess@broadcom.com>
469 * breakpoint.c (update_watchpoint): Update error message and add
470 an additional error message.
472 2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
474 * s390-tdep.h: Rename to...
475 * s390-linux-tdep.h: ...here.
476 * s390-tdep.c: Rename to...
477 * s390-linux-tdep.c: ...here. Adjust #include.
478 * s390-nat.c: Rename to...
479 * s390-linux-nat.c: ...here. Adjust #include.
480 * config/s390/s390.mh: Rename to...
481 * config/s390/linux.mh: ...here. Reflect rename s390-nat.o ->
483 * configure.host: Reflect host rename "s390" -> "linux".
484 * configure.tgt: Reflect rename s390-tdep.o -> s390-linux-tdep.o.
485 * Makefile.in (ALL_TARGET_OBS): Likewise.
486 (HFILES_NO_SRCDIR): Reflect rename s390-tdep.h ->
488 (ALLDEPFILES): Reflect rename of .c files.
490 2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
492 * s390-nat.c: Whitespace cleanup.
493 * s390-tdep.c: Likewise.
494 * s390-tdep.h: Remove empty line at end of file.
496 2013-10-30 Maciej W. Rozycki <macro@codesourcery.com>
498 * linux-tdep.c (linux_corefile_thread_callback): Preinitialize
501 2013-10-29 Tom Tromey <tromey@redhat.com>
503 * utils.c (reg): Move undefinition...
504 * gdb_curses.h: ... here. Update comment to mention AIX.
506 2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
508 * exec.h (add_target_sections_of_objfile): New declaration.
509 * exec.c (add_target_sections_of_objfile): New function.
510 * symfile.c (add_symbol_file_command): Update current target sections.
511 (remove_symbol_file_command): New command.
512 (symfile_free_objfile): New function.
513 (_initialize_symfile): Register observer for free_objfile events.
514 * NEWS: Add description of the remove-symbol-file command.
515 * breakpoint.c (disable_breakpoints_in_freed_objfile): New function.
516 * objfiles.c (free_objfile): Notify free_objfile.
517 (is_addr_in_objfile): New function.
518 * objfiles.h (is_addr_in_objfile): New declaration.
519 * printcmd.c (clear_dangling_display_expressions): Act upon free_objfile
520 events instead of solib_unloaded events.
521 (_initialize_printcmd): Register observer for free_objfile instead
522 of solib_unloaded notifications.
523 * solib.c (remove_user_added_objfile): New function.
524 (_initialize_symfile): Add remove-symbol-file.
526 2013-10-29 Andrew Burgess <aburgess@broadcom.com>
528 * infcmd.c (default_print_one_register_info): Use val_print to
529 print all values even optimized out or unavailable ones. Don't
530 try to print a raw form of optimized out or unavailable values.
532 2013-10-29 Yao Qi <yao@codesourcery.com>
534 * auto-load.c (auto_load_pspace_data_cleanup): Get data from
535 parameter 'arg' instead of from program_space_data.
536 * objfiles.c (objfiles_pspace_data_cleanup): Likewise.
537 * solib-darwin.c (darwin_pspace_data_cleanup): Likewise.
538 * solib-dsbt.c (dsbt_pspace_data_cleanup): Likewise.
539 * solib-svr4.c (svr4_pspace_data_cleanup): Likewise.
540 * inflow.c (inflow_inferior_data_cleanup): Get data from
541 parameter 'arg' instead of inferior_data.
542 * registry.h: Add comments.
544 2013-10-28 Pedro Alves <palves@redhat.com>
546 * breakpoint.c (watchpoints_triggered)
547 <!target_stopped_data_address>: Hardcode return 1.
549 2013-10-28 Pedro Alves <palves@redhat.com>
551 * infrun.c (process_event_stop_test): Remove unnecessary scoping
554 2013-10-28 Pedro Alves <palves@redhat.com>
556 * infrun.c (process_event_stop_test): New function, factored out
557 from handle_inferior_event.
558 (handle_inferior_event): 'process_event_stop_test' is now a
559 function instead of a goto label -- adjust.
561 2013-10-28 Pedro Alves <palves@redhat.com>
563 * infrun.c (handle_inferior_event): Move process_event_stop_test
564 goto label to the else branch of the ecs->random_signal check,
565 along with FRAME and GDBARCH re-fetching.
567 2013-10-28 Pedro Alves <palves@redhat.com>
569 * infrun.c (switch_back_to_stepped_thread): New function, factored
570 out from handle_inferior_event.
571 (handle_inferior_event): Adjust to call
572 switch_back_to_stepped_thread. Call it also at the tail of the
573 random signal handling, and return, instead of also handling
574 random signals just before the stepping tests.
576 2013-10-28 Pedro Alves <palves@redhat.com>
578 * infrun.c (clear_stop_func): Delete.
579 (handle_inferior_event): Don't call clear_stop_func and don't
580 clear 'ecs->random_signal'.
582 2013-10-27 Yao Qi <yao@codesourcery.com>
584 * varobj.c (struct varobj_root) <lang>: Rename to 'lang_ops'.
585 (varobj_create, varobj_get_path_expr): Update.
586 (varobj_value_has_mutated, varobj_update): Likewise.
587 (create_child_with_value, new_root_variable): Likewise.
588 (number_of_children, name_of_variable): Likewise.
589 (value_of_child, my_value_of_variable): Likewise.
590 (varobj_value_is_changeable_p): Likewise.
592 2013-10-25 Yao Qi <yao@codesourcery.com>
594 * language.h (struct lang_varobj_ops): Declare.
595 (struct language_defn) <la_varobj_ops>: New field.
596 * ada-lang.c: Include "varobj.h"
597 (defn ada_language_defn): Initialize field 'la_varobj_ops' with
599 * c-lang.c: Include "varobj.h"
600 (c_language_defn): Initialize field 'la_varobj_ops' with
602 (cplus_language_defn): Initialize field 'la_varobj_ops' with
604 (asm_language_defn): Initialize field 'la_varobj_ops' with
606 (minimal_language_defn): Likewise.
607 * d-lang.c (d_language_defn): Likewise.
608 * f-lang.c (f_language_defn): Likewise.
609 * go-lang.c (go_language_defn): Likewise.
610 * m2-lang.c (m2_language_defn): Likewise.
611 * objc-lang.c (objc_language_defn): Likewise.
612 * opencl-lang.c (opencl_language_defn): Likewise.
613 * p-lang.c (pascal_language_defn): Likewise.
614 * language.c (unknown_language_defn): Likewise.
615 (auto_language_defn): Likewise.
616 (local_language_defn): Likewise.
617 * jv-lang.c (java_language_defn): Initialize field
618 'la_varobj_ops' with java_varobj_ops.
619 * varobj.c (varobj_create): Update.
620 * varobj.h (default_varobj_ops): Define macro.
622 2013-10-25 Pedro Alves <palves@redhat.com>
624 * cp-valprint.c (cp_print_value_fields): No longer handle a NULL
626 (cp_print_static_field): If the value is entirely optimized out,
627 print <optimized out> here.
628 * jv-valprint.c (java_print_value_fields): No longer handle a NULL
630 * p-valprint.c (pascal_object_print_static_field): If the value is
631 entirely optimized out, print <optimized out> here.
632 * valops.c (do_search_struct_field)
633 (value_struct_elt_for_reference): No longer handle a NULL static
635 * value.c (value_static_field): Return an optimized out value
638 2013-10-25 Yao Qi <yao@codesourcery.com>
640 * remote.c (remote_traceframe_info): Return early if
641 traceframe is not selected.
643 2013-10-25 Yao Qi <yao@codesourcery.com>
645 * tracepoint.c (traceframe_fun): Remove.
646 (traceframe_sal): Remove.
647 (set_traceframe_context): Add local variables.
649 2013-10-25 Joel Brobecker <brobecker@adacore.com>
651 * varobj.h (struct lang_varobj_ops): Remove spaces between '*'
654 2013-10-24 Maciej W. Rozycki <macro@codesourcery.com>
656 * linux-tdep.c (linux_corefile_thread_callback): Propagate any
657 failure from register information collection.
659 2013-10-24 Maciej W. Rozycki <macro@codesourcery.com>
661 * linux-tdep.c (linux_corefile_thread_data): Remove `num_notes'
663 (linux_corefile_thread_callback): Update accordingly.
664 (linux_make_corefile_notes): Likewise.
666 2013-10-24 Pedro Alves <palves@redhat.com>
668 * NEWS (New options): Mention set/show startup-with-shell.
669 * config/alpha/nm-osf3.h (START_INFERIOR_TRAPS_EXPECTED): Set to 2
671 * fork-child.c (fork_inferior, startup_inferior): Handle 'set
673 (show_startup_with_shell): New function.
674 (_initialize_fork_child): Register the set/show startup-with-shell
676 * inf-ptrace.c (inf_ptrace_create_inferior): Remove comment.
677 * inf-ttrace.c (inf_ttrace_him): Remove comment.
678 * procfs.c (procfs_init_inferior): Remove comment.
679 * infcmd.c (startup_with_shell): New global.
680 * inferior.h (startup_with_shell): Declare global.
681 (STARTUP_WITH_SHELL): Delete.
682 (START_INFERIOR_TRAPS_EXPECTED): Set to 1 by default instead of 2.
684 2013-10-23 Pedro Alves <palves@redhat.com>
686 * common/gdb_signals.h (gdb_signal_to_symbol_string): Declare.
687 * common/signals.c: Include "gdb_assert.h".
688 (signals): New field 'symbol'.
689 (SET): Use the 'symbol' parameter.
690 (gdb_signal_to_symbol_string): New function.
691 * infrun.c (handle_inferior_event) <random signal>: In debug
692 output, print the random signal enum as string in addition to its
694 * target/waitstatus.c (target_waitstatus_to_string): Print the
695 signal's enum value as string instead of the (POSIX) signal name.
697 2013-10-23 Gary Benson <gbenson@redhat.com>
700 * common/linux-osdata.c (command_from_pid): Reduced size of cmd
701 from 32 to 18. Adjusted fscanf format string accordingly.
702 (Avoids leaving cmd unterminated.)
703 (print_sockets): Do not parse tlen, inode, sl, timeout, txq, rxq,
704 trun, retn or extra. (Avoids leaving extra unterminated.) Check
705 that local_address and remote_address will not overflow.
706 (linux_xfer_osdata_modules): Parse lines using strtok to avoid
707 leaving dependencies unterminated. Parse size as "%u" to match
710 2013-10-22 Pedro Alves <palves@redhat.com>
712 * infrun.c (handle_inferior_event) <thread hop>: Don't clear or
713 set ecs->random signal.
715 2013-10-22 Pedro Alves <palves@redhat.com>
717 * infrun.c (keep_going): Update comments.
719 2013-10-22 Pedro Alves <palves@redhat.com>
721 * remote.c (remote_parse_stop_reply) <'T'/'S'/'X' replies>: Map
722 invalid signal numbers to GDB_SIGNAL_UNKNOWN.
724 2013-10-22 Pedro Alves <palves@redhat.com>
726 * include/gdb/signals.def (TARGET_EXC_BAD_ACCESS): Rename to
728 (TARGET_EXC_BAD_INSTRUCTION): Rename to GDB_EXC_BAD_INSTRUCTION.
729 (TARGET_EXC_ARITHMETIC): Rename to GDB_EXC_ARITHMETIC.
730 (TARGET_EXC_EMULATION): Rename to GDB_EXC_EMULATION.
731 (TARGET_EXC_SOFTWARE): Rename to GDB_EXC_SOFTWARE.
732 (TARGET_EXC_BREAKPOINT): Rename to GDB_EXC_BREAKPOINT.
733 (GDB_SIGNAL_LAST): Change description string.
734 * common/signals.c (gdb_signal_from_host, do_gdb_signal_to_host):
735 Adjust to signal renaming.
736 * darwin-nat.c (darwin_decode_message): Likewise.
738 2013-10-22 Jose E. Marchesi <jose.marchesi@oracle.com>
740 * MAINTAINERS (Write After Approval): Add myself to the list.
742 2013-10-18 Andrew Burgess <aburgess@broadcom.com>
744 * breakpoint.c (update_watchpoint): If hardware watchpoints are
745 forced off, downgrade them to software watchpoints if possible,
746 and error out if not possible.
747 (watch_command_1): Move watchpoint type selection closer to
748 watchpoint creation, and extend the comments.
750 2013-10-18 Pedro Alves <palves@redhat.com>
753 * infrun.c (handle_inferior_event): Keep going if we got a random
754 signal we should not stop for, instead of falling through to the
757 2013-10-18 Yao Qi <yao@codesourcery.com>
759 * c-varobj.c (cplus_number_of_children): Fix indentation.
761 2013-10-17 Tom Tromey <tromey@redhat.com>
764 * printcmd.c (printcmd): Call gdb_flush.
766 2013-10-17 Tom Tromey <tromey@redhat.com>
768 * elfread.c (struct elfinfo) <stabindexsect>: Remove.
769 (elf_locate_sections): Update.
771 2013-10-17 Yao Qi <yao@codesourcery.com>
773 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
774 * ada-varobj.c: Remove the include of ada-varobj.h.
775 (ada_varobj_get_number_of_children): Declare.
776 (ada_varobj_get_name_of_child): Make it static.
777 (ada_varobj_get_path_expr_of_child): Likewise.
778 (ada_varobj_get_value_of_child): Likewise.
779 (ada_varobj_get_type_of_child): Likewise.
780 (ada_varobj_get_value_of_array_variable): Likewise.
781 * ada-varobj.h: Remove.
783 2013-10-17 Yao Qi <yao@codesourcery.com>
785 * Makefile.in (SFILES): Add c-varobj.c and jv-varobj.c.
786 (COMMON_OBS): Add c-varobj.o and jv-varobj.o.
787 * ada-varobj.c: Include "varobj.h".
788 (ada_number_of_children): New. Moved from varobj.c.
789 (ada_name_of_variable, ada_name_of_child): Likewise.
790 (ada_path_expr_of_child, ada_value_of_child): Likewise.
791 (ada_type_of_child, ada_value_of_variable): Likewise.
792 (ada_value_is_changeable_p, ada_value_has_mutated): Likewise.
793 (ada_varobj_ops): New.
794 * c-varobj.c, jv-varobj.c: New file. Moved from varobj.c.
795 * gdbtypes.c (get_target_type): New. Moved from varobj.c.
796 * gdbtypes.h (get_target_type): Declare.
797 * varobj.c: Remove the inclusion of "ada-varobj.h" and
799 (ANONYMOUS_STRUCT_NAME): Move it to c-varobj.c.
800 (ANONYMOUS_UNION_NAME): Likewise.
801 (get_type, get_value_type, get_target_type): Remove declarations.
802 (value_get_print_value, varobj_value_get_print_value): Likewise.
803 (c_number_of_children, c_name_of_variable): Likewise.
804 (c_name_of_child, c_path_expr_of_child): Likewise.
805 (c_value_of_child, c_type_of_child): Likewise.
806 (c_value_of_variable, cplus_number_of_children): Likewise.
807 (cplus_class_num_children, cplus_name_of_variable): Likewise.
808 (cplus_name_of_child, cplus_path_expr_of_child): Likewise.
809 (cplus_value_of_child, cplus_type_of_child): Likewise.
810 (cplus_value_of_variable, java_number_of_children): Likewise.
811 (java_name_of_variable, java_name_of_child): Likewise.
812 (java_path_expr_of_child, java_value_of_child): Likewise.
813 (java_type_of_child, java_value_of_variable): Likewise.
814 (ada_number_of_children, ada_name_of_variable): Likewise.
815 (ada_name_of_child, ada_path_expr_of_child): Likewise.
816 (ada_value_of_child, ada_type_of_child): Likewise.
817 (ada_value_of_variable, ada_value_is_changeable_p): Likewise.
818 (ada_value_has_mutated): Likewise.
819 (struct language_specific): Move it to varobj.h.
820 (CPLUS_FAKE_CHILD): Move it to varobj.h.
821 (restrict_range): Rename it varobj_restrict_range. Make it extern.
823 (get_path_expr_parent): Rename it to varobj_get_path_expr_parent.
825 (is_anonymous_child): Move it to c-varobj.c and rename to
826 varobj_is_anonymous_child. Caller update.
827 (get_type): Move it to c-varobj.c.
828 (get_value_type): Rename it varobj_get_value_type. Make it
830 (get_target_type): Move it gdbtypes.c.
831 (varobj_formatted_print_options): New function.
832 (value_get_print_value): Rename it to
833 varobj_value_get_print_value and make it extern.
834 (varobj_value_is_changeable_p): Make it extern.
835 (adjust_value_for_child_access): Move it to c-varobj.c.
836 (default_value_is_changeable_p): Rename it to
837 varobj_default_value_is_changeable_p. Make it extern.
838 (c_number_of_children, c_name_of_variable): Move it to c-varobj.c
839 (c_name_of_child, c_path_expr_of_child): Likewise.
840 (c_value_of_child, c_type_of_child): Likewise.
841 (c_value_of_variable, cplus_number_of_children): Likewise.
842 (cplus_class_num_children, cplus_name_of_variable): Likewise.
843 (cplus_name_of_child, cplus_path_expr_of_child): Likewise.
844 (cplus_value_of_child, cplus_type_of_child): Likewise.
845 (cplus_value_of_variable): Likewise.
846 (java_number_of_children, java_name_of_variable): Move it to jv-varobj.c.
847 (java_name_of_child, java_path_expr_of_child): Likewise.
848 (java_value_of_child, java_type_of_child): Likewise.
849 (java_value_of_variable): Likewise.
850 (ada_number_of_children, ada_name_of_variable): Move it to ada-varobj.c.
851 (ada_name_of_child, ada_path_expr_of_child): Likewise.
852 (ada_value_of_child, ada_type_of_child): Likewise.
853 (ada_value_of_variable, ada_value_is_changeable_p): Likewise.
854 (ada_value_has_mutated): Likewise.
855 * varobj.h (CPLUS_FAKE_CHILD): New macro, moved from varobj.c.
856 (struct lang_varobj_ops): New. Renamed by 'struct language_specific'.
857 (c_varobj_ops, cplus_varobj_ops): Declare.
858 (java_varobj_ops, ada_varobj_ops): Declare.
859 (varobj_default_value_is_changeable_p): Declare.
860 (varobj_value_is_changeable_p): Declare.
861 (varobj_get_value_type, varobj_is_anonymous_child): Declare.
862 (varobj_get_path_expr_parent): Declare.
863 (varobj_value_get_print_value): Declare.
864 (varobj_formatted_print_options): Declare.
865 (varobj_restrict_range): Declare.
867 2013-10-17 Luis Machado <lgustavo@codesourcery.com>
869 * target/waitstatus.h (target_waitkind): Remove spurious
870 character from the comments.
872 2013-10-17 Joel Brobecker <brobecker@adacore.com>
874 * gdbarch.sh (get_longjmp_target): Add method documentation.
875 * gdbarch.h: Regenerate.
877 2013-10-16 Tom Tromey <tromey@redhat.com>
879 * dbxread.c (read_dbx_symtab) <bss_ext_symbol>: Remove unused
882 2013-10-16 Luis Machado <lgustavo@codesourcery.com>
884 * gcore.in: Call GDB using the full path to the gcore script.
885 Error out if the GDB binary is not found.
887 2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
890 * dwarf2read.c (dw2_get_real_path): Remove unnecessary call to
893 2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
896 * target.c (target_disable_btrace): Fix invalid return value for
898 (target_teardown_btrace): Likewise.
900 2013-10-14 Yao Qi <yao@codesourcery.com>
902 * varobj.c (struct varobj): Move most of the fields to
904 (struct varobj_dynamic): New struct.
905 (varobj_get_display_hint) [HAVE_PYTHON]: Adjust.
906 (varobj_has_more): Likewise.
907 (dynamic_varobj_has_child_method): Likewise.
908 (update_dynamic_varobj_children): Likewise.
909 (varobj_get_num_children): Likewise.
910 (varobj_list_children, varobj_pretty_printed_p): Likewise.
911 (install_new_value_visualizer): Likewise.
912 (install_new_value_visualizer, install_new_value): Likewise.
913 (varobj_update, new_variable, free_variable): Likewise.
914 (my_value_of_variable, value_get_print_value): Likewise.
915 (install_visualizer): Change the type of parameter 'var' to
916 'struct varobjd_dynamic *'. Callers update.
917 * varobj.h (struct varobj): Moved from varobj.c.
918 (struct varobj) <dynamic>: New field.
920 2013-10-13 Sandra Loosemore <sandra@codesourcery.com>
922 * nios2-tdep.c (nios2_reg_names): Use "sstatus" rather than "ba"
923 as the preferred name of r30.
924 * nios2-linux-tdep.c (reg_offsets): Likewise.
925 * features/nios2-cpu.xml: Likewise.
926 * features/nios2-linux.c: Regenerated.
927 * features/nios2.c: Regenerated.
928 * regformats/nios2-linux.dat: Regenerated.
930 2013-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
932 Canonicalize directories for EXEC_FILENAME.
933 * exec.c (exec_file_attach): Use gdb_realpath_keepfile for
935 * utils.c (gdb_realpath_keepfile): New function.
936 * utils.h (gdb_realpath_keepfile): New declaration.
938 2013-10-11 Doug Evans <dje@google.com>
940 * Makefile.in (GDBFLAGS): New variable.
943 2013-10-11 Joel Brobecker <brobecker@adacore.com>
945 * NEWS: Add entry documenting the new "-catch-assert" and
946 "-catch-exception" GDB/MI commands.
948 2013-10-11 Joel Brobecker <brobecker@adacore.com>
950 * breakpoint.h (init_ada_exception_breakpoint): Add parameter
952 * breakpoint.c (init_ada_exception_breakpoint): Add parameter
953 "enabled". Set B->ENABLE_STATE accordingly.
954 * ada-lang.h (ada_exception_catchpoint_kind): Move here from
956 (create_ada_exception_catchpoint): Add declaration.
957 * ada-lang.c (ada_exception_catchpoint_kind): Move to ada-lang.h.
958 (create_ada_exception_catchpoint): Make non-static. Add new
959 parameter "disabled". Use it in call to
960 init_ada_exception_breakpoint.
961 (catch_ada_exception_command): Add parameter "enabled" in call
962 to create_ada_exception_catchpoint.
963 (catch_assert_command): Likewise.
965 * mi/mi-cmds.h (mi_cmd_catch_assert, mi_cmd_catch_exception):
967 * mi/mi-cmds.c (mi_cmds): Add the "catch-assert" and
968 "catch-exception" commands.
969 * mi/mi-cmd-catch.c: Add #include "ada-lang.h".
970 (mi_cmd_catch_assert, mi_cmd_catch_exception): New functions.
972 2013-10-11 Joel Brobecker <brobecker@adacore.com>
974 * ada-lang.c (enum ada_exception_catchpoint_kind): Renames
975 "enum exception_catchpoint_kind". Replace the "ex_" prefix
976 of all its enumerates with "ada_". Update the rest of this
979 2013-10-11 Joel Brobecker <brobecker@adacore.com>
981 * ada-lang.c (ada_decode_exception_location): Delete.
982 (create_ada_exception_catchpoint): Remove arguments "sal",
983 "addr_string" and "ops". Add argument "ex_kind" instead.
984 Adjust implementation accordingly, calling ada_exception_sal
985 to get the entities it no longer gets passed as arguments.
986 Document the function's arguments.
987 (catch_ada_exception_command): Use catch_ada_exception_command_split
988 instead of ada_decode_exception_location, and update call to
989 create_ada_exception_catchpoint.
990 (catch_ada_assert_command_split): Renames
991 ada_decode_assert_location. Remove parameters "addr_string" and
992 "ops", and now returns void. Adjust implementation accordingly.
993 Update the function documentation.
994 (catch_assert_command): Use catch_ada_assert_command_split
995 instead of ada_decode_assert_location. Update call to
996 create_ada_exception_catchpoint.
998 2013-10-11 Joel Brobecker <brobecker@adacore.com>
1000 * utils.h (perror_warning_with_name): Add declaration.
1001 * utils.c (perror_warning_with_name): New function.
1002 * cli/cli-cmds.c (source_script_with_search): Add call to
1003 perror_warning_with_name if from_tty is nul.
1005 2013-10-11 Joel Brobecker <brobecker@adacore.com>
1007 * utils.c (perror_string): New function, extracted out of
1008 throw_perror_with_name.
1009 (throw_perror_with_name): Rework to use perror_string.
1011 2013-10-11 Yao Qi <yao@codesourcery.com>
1013 * remote.c (discard_pending_stop_replies_in_queue): Update
1015 (struct stop_reply) <rs>: New field.
1016 (remove_stop_reply_of_remote_state): New function.
1017 (discard_pending_stop_replies_in_queue): Add parameter 'rs'.
1018 Callers update. Pass remove_stop_reply_of_remote_state to
1020 (remote_parse_stop_reply): Initialize field 'rs'.
1022 2013-10-10 Will Newton <will.newton@linaro.org>
1024 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
1027 2013-10-10 Joel Brobecker <brobecker@adacore.com>
1029 * cli/cli-cmds.c (show_baud_rate): Moved to serial.c as
1030 serial_baud_show_cmd.
1031 (_initialize_cli_cmds): Delete the code creating the
1032 "set/show remotebaud" commands.
1033 * serial.c (baud_rate): Move here from top.c.
1034 (serial_baud_show_cmd): Move here from cli/cli-cmds.c.
1035 (_initialize_serial): Create "set/show serial baud" commands.
1036 Add "set/show remotebaud" command aliases.
1037 * top.c (baud_rate): Moved to serial.c.
1038 * NEWS: Document the new "set/show serial baud" commands,
1039 replacing "set/show remotebaud".
1041 2013-10-09 Pedro Alves <palves@redhat.com>
1043 * breakpoint.c (insert_bp_location): Use memory_error_message to
1044 build the memory error string.
1045 * c-lang.c: Include "gdbcore.h".
1046 (c_get_string): Use memory_error to throw error.
1047 (target_xfer_memory_error): Delete.
1048 (memory_error_message): New, factored out from
1049 target_xfer_memory_error.
1050 (memory_error): Change parameter type to target_xfer_error.
1052 (read_memory): Use memory_error instead of
1053 target_xfer_memory_error.
1054 * gdbcore.h: Include "target.h".
1055 (memory_error): Change parameter type to target_xfer_error.
1056 (memory_error_message): Declare function.
1057 * target.c (target_read_memory, target_read_stack)
1058 (target_write_memory, target_write_raw_memory): Return
1059 TARGET_XFER_E_IO on error. Adjust comments.
1060 (get_target_memory): Pass TARGET_XFER_E_IO to memory_error,
1062 * target.h (target_read, target_insert_breakpoint)
1063 (target_remove_breakpoint): Adjust comments.
1064 * valprint.c (partial_memory_read): Rename parameter, and adjust
1066 (val_print_string): Use memory_error_message to build the memory
1069 2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1071 * common/filestuff.c (gdb_fopen_cloexec): Remove initialization of
1072 result variable. Rename variable fopen_e_ever_failed to
1073 fopen_e_ever_failed_einval. Retry fopen only for errno EINVAL.
1075 2013-10-09 Pedro Alves <palves@redhat.com>
1077 * monitor.c (monitor_write_memory, monitor_write_memory_bytes)
1078 (monitor_write_memory_longlongs, monitor_write_memory_block):
1079 Constify 'myaddr' parameter.
1080 (monitor_xfer_memory): Adjust interface as monitor_xfer_partial
1082 (monitor_xfer_partial): New function.
1083 (init_base_monitor_ops): Don't install a deprecated_xfer_memory
1084 hook. Install a to_xfer_partial hook.
1086 2013-10-09 Tom Tromey <tromey@redhat.com>
1088 * dwarf2read.c (dwarf2_get_dwz_file): Update for type change in
1089 bfd_get_alt_debug_link_info.
1091 2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1093 New flag OBJF_NOT_FILENAME.
1094 * auto-load.c (auto_load_objfile_script): Check also OBJF_NOT_FILENAME.
1095 * jit.c (jit_object_close_impl): Use OBJF_NOT_FILENAME for
1097 (jit_bfd_try_read_symtab): Use OBJF_NOT_FILENAME for
1098 symbol_file_add_from_bfd.
1099 * jv-lang.c (get_dynamics_objfile): Use OBJF_NOT_FILENAME for
1101 * objfiles.c (allocate_objfile): Assert OBJF_NOT_FILENAME if NAME is
1103 * objfiles.h (OBJF_NOT_FILENAME): New.
1105 2013-10-08 Tom Tromey <tromey@redhat.com>
1107 * Makefile.in (SFILES): Add build-id.c.
1108 (HFILES_NO_SRCDIR): Add build-id.h.
1109 * build-id.c: New file, largely from elfread.c. Modified
1111 * build-id.h: New file.
1112 * dwarf2read.c (dwarf2_get_dwz_file): Update for change to
1113 bfd_get_alt_debug_link_info. Verify dwz file's build-id.
1114 Search for dwz file using build-id.
1115 * elfread.c (build_id_bfd_get, build_id_verify)
1116 (build_id_to_debug_filename, find_separate_debug_file): Remove.
1118 2013-10-08 Joel Brobecker <brobecker@adacore.com>
1120 * ada-lang.c (compare_names_with_case): Renamed from
1121 compare_names, adding a new parameter "casing" and its handling.
1122 New function documentation.
1123 (compare_names): New function, implemented using
1124 compare_names_with_case.
1126 2013-10-08 Joel Brobecker <brobecker@adacore.com>
1128 * ada-lang.c (ada_exception_sal): Remove advance declaration.
1130 2013-10-07 Tom Tromey <tromey@redhat.com>
1132 * objfiles.c (free_objfile_per_bfd_storage): Delete the
1133 demangled_names_hash.
1134 (free_objfile): Don't delete the demangled_names_hash.
1135 * objfiles.h (struct objfile_per_bfd_storage)
1136 <demangled_names_hash>: New field.
1137 (struct objfile) <demangled_names_hash>: Move to
1138 objfile_per_bfd_storage.
1139 * symfile.c (reread_symbols): Don't delete the
1140 demangled_names_hash.
1141 * symtab.c (create_demangled_names_hash): Update.
1142 (symbol_set_names): Update.
1144 2013-10-07 Tom Tromey <tromey@redhat.com>
1146 * gdb_bfd.c (struct gdb_bfd_data) <relocation_computed,
1147 needs_relocations>: New fields.
1148 (gdb_bfd_requires_relocations): New function.
1149 * gdb_bfd.h (gdb_bfd_requires_relocations): Declare.
1150 * objfiles.c (get_objfile_bfd_data): Disallow sharing if
1151 the BFD needs relocations applied.
1153 2013-10-07 Pedro Alves <palves@redhat.com>
1155 PR breakpoints/11568
1156 * breakpoint.c (remove_threaded_breakpoints): Say "no longer in
1157 the thread list" instead of "gone".
1159 2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
1161 * NEWS: Mention new convenience variable $_exitsignal.
1162 * corelow.c (core_open): Reset exit convenience variables. Set
1163 $_exitsignal to the uncaught signal which generated the corefile.
1164 * infrun.c (handle_inferior_event): Reset exit convenience
1165 variables. Set $_exitsignal for TARGET_WAITKIND_SIGNALLED.
1166 (clear_exit_convenience_vars): New function.
1167 * inferior.h (clear_exit_convenience_vars): New prototype.
1169 2013-10-06 Yao Qi <yao@codesourcery.com>
1171 * varobj.h: Add comments to enum varobj_languages.
1173 2013-10-04 Doug Evans <dje@google.com>
1175 Add support for DWP file format version 2.
1176 * NEWS: Mention support for DWP file format version 2.
1177 * dwarf2read.c (dwarf2_section_info): Convert asection field to a
1178 union of asection, containing_section. New fields virtual_offset
1179 and is_virtual. Change type of readin filed from int to char.
1180 (dwo_sections, dwo_file): Tweak comments.
1181 (dwp_v2_section_ids): New enum.
1182 (dwp_sections): New fields abbrev, info, line, loc, macinfo, macro,
1184 (virtual_v1_dwo_sections): Renamed from virtual_dwo_sections.
1186 (virtual_v2_dwo_sections): New struct.
1187 (dwp_hash_table): New fields version, nr_columns. Change type of
1188 section_pool field to a union.
1189 (dwp_file): New field version.
1190 (dwarf2_has_info): Check for virtual sections.
1191 (get_containing_section): New function.
1192 (get_section_bfd_owner, get_section_bfd_section): Call it.
1193 (dwarf2_locate_sections): Update.
1194 (dwarf2_section_empty_p): Update.
1195 (dwarf2_read_section): Handle virtual sections.
1196 (locate_dwz_sections): Update.
1197 (create_dwp_hash_table): Document and handle V2 format.
1198 (locate_v1_virtual_dwo_sections): Renamed from
1199 locate_virtual_dwo_sections and update. All callers updated.
1200 (create_dwo_unit_in_dwp_v1): Renamed from create_dwo_in_dwp.
1201 Delete arg htab. Rename arg section_index to unit_index.
1202 All callers updated.
1203 (MAX_NR_V1_DWO_SECTIONS): Renamed from MAX_NR_DWO_SECTIONS.
1205 (create_dwp_v2_section, create_dwo_unit_in_dwp_v2): New functions.
1206 (lookup_dwo_unit_in_dwp): Add V2 support.
1207 (dwarf2_locate_dwo_sections): Update.
1208 (dwarf2_locate_common_dwp_sections): Renamed from
1209 dwarf2_locate_dwp_sections and update. All callers updated.
1210 (dwarf2_locate_v2_dwp_sections): New function.
1211 (open_and_init_dwp_file): Add V2 support.
1212 (read_str_index): New locals str_section, str_offsets_section.
1214 2013-10-04 Pedro Alves <palves@redhat.com>
1216 * common/ptid.c (null_ptid, minus_one_ptid, ptid_build)
1217 (pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid)
1218 (ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p): Replace
1219 describing comments with references to ptid.h.
1220 * common/ptid.h: Remove intro description of constructors,
1221 accessors and predicates.
1222 (struct ptid): Reformat.
1223 (minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid)
1224 (ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Change
1225 describing comments.
1227 2013-10-04 Joel Brobecker <brobecker@adacore.com>
1229 * aix-thread.c (sync_threadlists): Add missing ')' in call
1232 2013-10-04 Joel Brobecker <brobecker@adacore.com>
1234 * procfs.c (procfs_init_inferior): Fix typo causing the build
1237 2013-10-04 Joel Brobecker <brobecker@adacore.com>
1239 * aix-thread.c (ptrace32): Remove cast to addr_ptr.
1241 2013-10-04 Joel Brobecker <brobecker@adacore.com>
1243 * mi/mi-main.c (run_one_inferior): Add function description.
1244 Make ARG a pointer to an integer whose value determines whether
1245 we should "run" or "start" the program.
1246 (mi_cmd_exec_run): Add handling of the "--start" option.
1247 Reject all other command-line options.
1248 * NEWS: Add entry for "-exec-run"'s new "--start" option.
1250 2013-10-04 Yao Qi <yao@codesourcery.com>
1252 * remote-notif.h (REMOTE_NOTIF_ID): New enum.
1253 (struct notif_client) <pending_event>: Moved
1254 to struct remote_notif_state.
1256 (struct remote_notif_state) <pending_event>: New field.
1257 (notif_event_xfree): Declare.
1258 * remote-notif.c (handle_notification): Adjust.
1259 (notif_event_xfree): New function.
1260 (do_notif_event_xfree): Call notif_event_xfree.
1261 (remote_notif_state_xfree): Call notif_event_xfree to free
1262 each element in field pending_event.
1263 * remote.c (discard_pending_stop_replies): Remove declaration.
1264 (discard_pending_stop_replies_in_queue): Declare.
1265 (remote_close): Call discard_pending_stop_replies_in_queue
1266 instead of discard_pending_stop_replies.
1267 (remote_start_remote): Adjust.
1268 (stop_reply_xfree): Call notif_event_xfree.
1269 (notif_client_stop): Adjust initialization.
1270 (remote_notif_remove_all): Rename it to ...
1271 (remove_stop_reply_for_inferior): ... this. Update comments.
1272 Don't check INF is NULL.
1273 (discard_pending_stop_replies): Return early if notif_state is
1274 NULL. Adjust. Don't check INF is NULL.
1275 (remote_notif_get_pending_events): Adjust.
1276 (discard_pending_stop_replies_in_queue): New function.
1277 (remote_wait_ns): Likewise.
1279 2013-10-04 Yao Qi <yao@codesourcery.com>
1281 * remote-notif.c (DECLARE_QUEUE_P): Remove.
1282 (notif_queue): Remove.
1283 (remote_notif_process): Add one parameter 'notif_queue'.
1284 Update comments. Callers update.
1285 (remote_async_get_pending_events_token): Remove.
1286 (remote_notif_register_async_event_handler): Remove.
1287 (remote_notif_unregister_async_event_handler): Remove.
1288 (handle_notification): Add parameter 'notif_queue'. Update
1289 comments. Callers update.
1290 (notif_xfree): Remove.
1291 (remote_notif_state_allocate): New function.
1292 (remote_notif_state_xfree): New function.
1293 (_initialize_notif): Remove code to allocate queue.
1294 * remote-notif.h (DECLARE_QUEUE_P): Moved from remote-notif.c.
1295 (struct remote_notif_state): New.
1296 (handle_notification): Update declaration.
1297 (remote_notif_process): Likewise.
1298 (remote_notif_register_async_event_handler): Remove.
1299 (remote_notif_unregister_async_event_handler): Remove.
1300 (remote_notif_state_allocate): Declare.
1301 (remote_notif_state_xfree): Declare.
1302 * remote.c (struct remote_state) <notif_state>: New field.
1303 (remote_close): Don't call
1304 remote_notif_unregister_async_event_handler. Call
1305 remote_notif_state_xfree.
1306 (remote_open_1): Don't call
1307 remote_notif_register_async_event_handler. Call
1308 remote_notif_state_allocate.
1310 2013-10-04 Yao Qi <yao@codesourcery.com>
1312 * varobj.c (create_child_with_value): Remove 'const' from the
1313 type of parameter 'name'.
1314 (varobj_add_child): Likewise.
1315 (install_dynamic_child): Remove 'const' from the type of
1317 (varobj_add_child): Likewise.
1318 (create_child_with_value): Likewise. Update comments. Don't
1320 (update_dynamic_varobj_children): Duplicate 'name'
1321 and pass it to install_dynamic_child.
1323 2013-10-03 Phil Muldoon <pmuldoon@redhat.com>
1325 * python/py-value.c (convert_value_from_python): Move PyInt_Check
1326 conversion logic to occur after PyLong_Check. Comment on order
1327 change significance.
1328 * python/py-arch.c (archpy_disassemble): Comment on order of
1329 conversion for integers and longs.
1331 2013-10-03 Pedro Alves <palves@redhat.com>
1333 * common/linux-ptrace.c (linux_check_ptrace_features): Factor out
1334 the PTRACE_O_TRACESYSGOOD and PTRACE_O_TRACEFORK to separate
1335 functions. Always test for PTRACE_O_TRACESYSGOOD even if
1336 PTRACE_O_TRACEFORK is not supported.
1337 (linux_test_for_tracesysgood): New function.
1338 (linux_test_for_tracefork): New function, factored out from
1339 linux_check_ptrace_features, and also don't kill child_pid here.
1341 2013-10-03 Tristan Gingold <gingold@adacore.com>
1343 * i386-darwin-nat.c (i386_darwin_dr_set): Fix argument type.
1344 Remove verbose error reporting. Use detected state to
1345 thread_set_state call.
1346 (i386_darwin_dr_get): Fix return type. Remove verbose error
1348 Remove trailing spaces.
1350 2013-10-02 Pedro Alves <palves@redhat.com>
1352 * cp-valprint.c (cp_print_value_fields): Adjust calls to
1353 val_print_optimized_out.
1354 * jv-valprint.c (java_print_value_fields): Likewise.
1355 * p-valprint.c (pascal_object_print_value_fields): Likewise.
1356 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full)
1357 <DWARF_VALUE_REGISTER>: If the register was not saved, return a
1358 new optimized out value.
1359 * findvar.c (address_from_register): Likewise.
1360 * frame.c (put_frame_register): Tweak error string to say the
1361 register was not saved, rather than optimized out.
1362 * infcmd.c (default_print_one_register_info): Adjust call to
1363 val_print_optimized_out. Use value_of_register instead of
1364 get_frame_register_value.
1365 * mi/mi-main.c (output_register): Use value_of_register instead of
1366 get_frame_register_value.
1367 * valprint.c (valprint_check_validity): Likewise.
1368 (val_print_optimized_out): New value parameter. If the value is
1369 lval_register, print <not saved> instead.
1370 (value_check_printable, val_print_scalar_formatted): Adjust calls
1371 to val_print_optimized_out.
1372 * valprint.h (val_print_optimized_out): New value parameter.
1373 * value.c (struct value) <optimized_out>: Extend comment.
1374 (error_value_optimized_out): New function.
1375 (require_not_optimized_out): Use it. Use a different string for
1376 lval_register values.
1377 * value.h (error_value_optimized_out): New declaration.
1378 * NEWS: Mention <not saved>.
1380 2013-10-02 Joel Brobecker <brobecker@adacore.com>
1382 * symtab.c (compare_search_syms): Use FILENAME_CMP instead of
1383 strcmp to compare two symtab filenames.
1385 2013-10-02 Joel Brobecker <brobecker@adacore.com>
1387 * symtab.c (search_symbols_equal): Delete.
1388 (sort_search_symbols_remove_dups): Replace call to
1389 search_symbols_equal by call to compare_search_syms,
1390 adjusting as necessary.
1392 2013-10-02 Phil Muldoon <pmuldoon@redhat.com>
1395 * python/python.c: Document gdb.execute command in Python help.
1397 2013-10-02 Phil Muldoon <pmuldoon@redhat.com>
1399 * python/py-frame.c (frame_info_to_frame_object): Use
1400 gdbpy_convert_exception. Clean up Python object on failure.
1402 2013-10-02 Phil Muldoon <pmuldoon@redhat.com>
1404 * python/lib/gdb/command/frame_filters.py
1405 (InfoFrameFilter.list_frame_filters): Retrieve exception manually.
1406 (ShowFrameFilterPriority.invoke): Ditto.
1408 2013-10-01 Keith Seitz <keiths@redhat.com>
1410 * linespec.c (struct ls_parser): Make 'saved_arg' const.
1411 (parse_linespec): Make 'argptr' const.
1412 Remove temporary cast of 'argptr' to const char **.
1413 (decode_line_full): Pass const pointer to parse_linespec.
1414 (decode_line_1): Likewise.
1415 (decode_objc): Make local variable 'new_argptr' const.
1416 (find_function_symbols): Remove temporary cast to char *
1418 * objc-lang.c (find_imps): Make argument 'method' const.
1420 * objc-lang.h (find_imps): Likewise.
1422 2013-10-01 Keith Seitz <keiths@redhat.com>
1424 * completer.c (skip_quoted_chars): Make all arguments const.
1426 (skip_quoted): Likewise.
1427 * completer.h (skip_quoted_chars): Likewise.
1428 (skip_quoted): Likewise.
1429 * defs.h (skip_quoted): Remove duplicate declaration.
1430 * jv-exp.y: Include completer.h.
1431 (yylex): Remove unneccessary cast to char * fro skip_quoted.
1432 * p-exp.y: Include completer.h.
1434 2013-10-01 Keith Seitz <keiths@redhat.com>
1436 * c-exp.y (parse_number): Make first argument const.
1437 Make a copy of the input to manipulate.
1438 (c_parse_escape): Make first argument const.
1439 Make local variable 'tokptr' const.
1440 (parse_string_or_char): Make first two arguments const.
1441 (macro_original_text): Make const.
1442 (lex_one_token): Make local variable 'tokstart' const.
1443 Likewise for local variables named 'p'.
1444 Cast away const for struct stoken (temporary).
1445 * c-lang.h (c_parse_escpae): Make first argument const.
1446 * cli/cli-cmds.c (echo_command): Make local variable 'p'
1448 * cli/cli-setshow.c (do_set_command): Likewise for 'p' in
1450 * f-exp.y (parse_number): Make first argument const.
1451 (match_string_literal): Make local variable 'tokstart'
1453 (yylex): Make local variable 'p' const.
1454 Cast away const for struct stoken (temporary).
1455 * go-exp.y (parse_number): Make first argument const.
1456 (parse_string_or_char): Likewise.
1457 Make local variable 'tokstart' const.
1458 (lex_one_token): Likewise for numerous locals called 'p'.
1459 Cast away const for struct stoken (temporary).
1460 * jv-exp.y (parse_number): Make first argument const.
1461 Make local variables 'tokstart' and 'tokptr' const.
1462 Cast away const for call to skip_quoted (temporary).
1463 (yylex): Make local variable 'p' const.
1464 Cast away const for struct stoken (temporary).
1465 * m2-exp.y (parse_number): Make local variable 'p' const.
1466 (yylex): Likewise for 'tokstart'.
1467 Cast away const for struct stoken (temporary).
1468 Make local variable 'p' const.
1469 * macroexp.c (get_character_constant): Pass a const string
1471 (get_string_literal): Likewise.
1472 (macro_expand_next): Make first argument const.
1473 Cast away const for init_shared_buffer.
1474 * macroexp.h (macro_expand_next): Make first argument const.
1475 * p-exp.y (yylex): Make a local copy of 'lexptr'.
1476 Pass a const string to c_parse_escape.
1477 Make local variables 'p' and 'namestart' const.
1478 * parse.c (lexptr): Make const.
1479 (prev_lexptr): Likewise.
1480 (find_template_name_end): Return const.
1481 Make argument const, too.
1482 (parse_exp_in_context): Make first argument const.
1483 Remove the entire const_hack.
1484 (parse_exp_in_context_1): Make first argument const.
1485 * parser-defs.h (find_template_name_end): Return const.
1486 Make argument const, too.
1487 (lexptr): Make const.
1488 (prev_lexptr): Likewise.
1489 * utils.c (parse_escape): Make second argument const.
1490 * utils.h (parse_escape): Likewise.
1492 2013-10-01 Keith Seitz <keiths@redhat.com>
1494 * ada-exp.y (write_object_renaming): Update: struct stoken.ptr
1496 (block_lookup): Make 'raw_name' and 'name' const.
1497 * ada-lex.l (processString): Update for struct stoken.ptr.
1498 * c-exp.y (qualified_name : TYPENAME COLONCOLON '~' name): Likewise.
1499 (operator_stoken): Likewise.
1500 (lex_one_token): Remove temporary cast to char * for
1502 * f-exp.y (yylex): Likewise.
1503 * gdb-types.c (lookup_struct_elt_type): Make argument 'name' const.
1504 * gdbtypes.h (lookup_struct_elt_type): Likewisee.
1505 * go-exp.y (lex_one_token): Remove temporary cast to char * for
1507 * jv-exp.y (QualifiedName): Update for struct stoken.ptr.
1508 (yylex): Remove temporary cast to char * for 'yylval.sval.ptr'.
1509 * linespec.c (struct ls_parser): Make 'stream' const.
1510 (find_parameter_list_end): Make argument 'input' and local
1512 (linespec_lexer_lex_string): Make local variables 'start' and
1514 Use skip_spaces_const instead of skip_spaces.
1515 (linespec_lexer_peek_token): Make local variable 'saved_stream'
1517 (parse_linespec): Temporarily cast 'argptr' to const for
1518 'parser->lexer.stream'.
1519 * m2-exp.y (yylex): Remove temporary cast to char * for
1521 * objc-lang.c (add_msglist): Make local variable 'p' const.
1522 * p-exp.y (exp : exp '['): Update for struct stoken.ptr.
1523 (exp : STRING): Make 'sp' const.
1524 (parse_number): Make argument 'p' const.
1525 * parser-defs.h (struct stoken): Make 'ptr' const.
1527 2013-10-01 Doug Evans <dje@google.com>
1529 * cli/cli-decode.c: Remove unnecessary inclusion of tui/tui.h.
1531 2013-10-01 Yao Qi <yao@codesourcery.com>
1533 * varobj.c (c_value_of_root): Remove declaration.
1534 (cplus_value_of_root, java_value_of_root): Likewise.
1535 (ada_value_of_root): Likewise.
1536 (struct language_specific) <value_of_root>: Remove.
1537 (languages): Update initialization.
1538 (check_scope): Move earlier.
1539 (c_value_of_root): Move earlier and rename to ...
1540 (value_of_root_1): ... this.
1541 (value_of_root): Caller update.
1542 (cplus_value_of_root, java_value_of_root): Remove.
1543 (ada_value_of_root): Remove.
1545 2013-10-01 Yao Qi <yao@codesourcery.com>
1547 * varobj.c (varobj_format_string): Remove "unknown".
1548 (languages): Remove the first element.
1549 * varobj.h (enum varobj_languages): Remove vlang_c.
1551 2013-10-01 Yao Qi <yao@codesourcery.com>
1553 * varobj.c (struct language_specific) <language>: Remove.
1554 (languages): Update the initialization.
1556 2013-10-01 Yao Qi <yao@codesourcery.com>
1558 * arm-wince-tdep.c: Remove inclusion of "solib.h" and
1559 "solib-target.h". Include "windows-tdep.h".
1560 (arm_wince_init_abi): Call windows_init_abi. Remove call to
1561 set_solib_ops and set_gdbarch_has_dos_based_file_system.
1562 * configure.tgt (arm*-wince-pe | arm*-*-mingw32ce*): Append
1563 windows-tdep.o to gdb_target_obs.
1565 2013-10-01 Yao Qi <yao@codesourcery.com>
1567 * amd64-windows-tdep.c: Remove inclusion of "solib.h" and
1569 (amd64_windows_init_abi): Don't call set_solib_ops and
1570 set_gdbarch_iterate_over_objfiles_in_search_order. Call
1571 windows_init_abi instead.
1572 * i386-cygwin-tdep.c: Remove inclusion of "solib.h" and
1574 (i386_cygwin_init_abi): Don't call set_solib_ops,
1575 set_gdbarch_has_dos_based_file_system and
1576 set_gdbarch_iterate_over_objfiles_in_search_order. Call
1577 windows_init_abi instead.
1578 * windows-tdep.c: Include "solib.h" and "solib-target.h".
1579 (windows_init_abi): New function.
1580 (windows_iterate_over_objfiles_in_search_order): Make it
1582 * windows-tdep.h (windows_init_abi): Declare.
1583 (windows_iterate_over_objfiles_in_search_order): Remove
1586 2013-10-01 Jerome Guitton <guitton@adacore.com>
1588 Checked in by Joel Brobecker <brobecker@adacore.com>
1589 * system-gdbinit/elinos.py (get_elinos_environment): Return an
1590 incomplete dictionnary instead of None in case of missing
1591 environment variables.
1592 (elinos_init): in case of an incomplete environment, best
1593 effort to load system libraries instead of abort.
1595 2013-10-01 Joel Brobecker <brobecker@adacore.com>
1597 * ada-lang.c (ada_has_this_exception_support): Ignore
1598 mst_solib_trampoline minimal symbols.
1600 2013-09-30 Tristan Gingold <gingold@adacore.com>
1602 * i386-darwin-nat.c (darwin_complete_target): Install methods for
1603 hardware watchpoint.
1604 (i386_darwin_dr_set): Support 32 and 64 bit states.
1605 (i386_darwin_dr_get): Likewise.
1606 (i386_darwin_dr_set_control): Make static.
1607 (i386_darwin_dr_set_addr, i386_darwin_dr_get_addr)
1608 (i386_darwin_dr_get_status, i386_darwin_dr_get_control): Likewise.
1610 2013-09-30 Luis Machado <lgustavo@codesourcery.com>
1612 * aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid.
1613 Replace TIDGET with ptid_get_lwp.
1614 Replace GET_LWP with ptid_get_lwp.
1615 * aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove.
1616 Replace BUILD_THREAD with ptid_build.
1617 Replace BUILD_LWP with ptid_build.
1618 Replace PIDGET with ptid_get_pid.
1619 Replace TIDGET with ptid_get_lwp.
1620 * alphabsd-nat.c: Replace PIDGET with ptid_get_pid.
1621 * amd64-linux-nat.c: Replace PIDGET with ptid_get_pid.
1622 Replace TIDGET with ptid_get_lwp.
1623 * amd64bsd-nat.c: Replace PIDGET with ptid_get_pid.
1624 * arm-linux-nat.c: Replace PIDGET with ptid_get_pid.
1625 Replace TIDGET with ptid_get_lwp.
1626 Replace GET_LWP with ptid_get_lwp.
1627 * armnbsd-nat.c: Replace PIDGET with ptid_get_pid.
1629 * breakpoint.c: Likewise.
1630 * common/ptid.c (ptid_is_pid): Condense check for
1631 null_ptid and minus_one_ptid.
1632 (ptid_lwp_p): New function.
1633 (ptid_tid_p): New function.
1634 * common/ptid.h: Update comments for accessors.
1635 (ptid_lwp_p): New prototype.
1636 (ptid_tid_p): New prototype.
1637 * defs.h (PIDGET, TIDGET, MERGEPID): Do not define.
1638 * gcore.c: Replace PIDGET with ptid_get_pid.
1639 * gdbthread.h: Likewise.
1640 * gnu-nat.c: Likewise.
1641 * hppa-linux-nat.c: Replace PIDGET with ptid_get_pid.
1642 Replace TIDGET with ptid_get_lwp.
1643 * hppabsd-nat.c: Replace PIDGET with ptid_get_pid.
1644 * hppanbsd-nat.c: Likewise.
1645 * i386-linux-nat.c: Replace PIDGET with ptid_get_pid.
1646 Replace TIDGET with ptid_get_lwp.
1647 * i386bsd-nat.c: Replace PIDGET with ptid_get_pid.
1648 * ia64-linux-nat.c: Replace PIDGET with ptid_get_pid.
1649 * infcmd.c: Likewise.
1650 * inferior.h: Likewise.
1651 * inflow.c: Likewise.
1652 * infrun.c: Likewise.
1653 * linux-fork.c: Likewise.
1654 * linux-nat.c: Replace PIDGET with ptid_get_pid.
1655 Replace GET_PID with ptid_get_pid.
1656 Replace is_lwp with ptid_lwp_p.
1657 Replace GET_LWP with ptid_get_lwp.
1658 Replace BUILD_LWP with ptid_build.
1660 2013-09-28 Mike Frysinger <vapier@gentoo.org>
1662 * common/linux-btrace.c: Move sys/syscall.h out of the
1663 HAVE_LINUX_PERF_EVENT_H check and wrap it in HAVE_SYS_SYSCALL_H.
1664 Also check for SYS_perf_event_open before attempting to buid.
1666 2013-09-27 Doug Evans <dje@google.com>
1668 * dwarf2read.c (dwarf2_section_info): Add comment.
1669 (dwp_file): Split loaded_cutus into loaded_cus, loaded_tus.
1671 (dwarf2_section_empty_p): Rename arg from "info" to "section".
1672 (dwarf2_read_section): Delete unused local "header". Add section
1673 name to error message.
1674 (create_dwo_in_dwp): Tweak comment.
1675 (MAX_NR_DWO_SECTIONS): Combine count of .debug_macro + .debug_macinfo.
1677 * dwarf2read.c (die_reader_specs): Tweak comment.
1678 (get_section_bfd_owner, get_section_bfd_section): New functions.
1679 (get_section_name, get_section_file_name): New functions.
1680 (get_section_id, get_section_flags): New functions.
1681 (*): Use new functions to access section fields.
1683 * dwarf2read.c (struct dwo_file): Add/tweak comments.
1684 (lookup_dwo_unit_in_dwp): Renamed from lookup_dwo_in_dwp. Remove
1685 arg "htab". All callers updated.
1686 (create_debug_types_hash_table): Remove redundant copy of
1688 (create_dwo_in_dwp): Tweak comments.
1689 (read_str_index): Tweak comment. Record dwarf form name in static
1692 2013-09-27 Pedro Alves <palves@redhat.com>
1694 * remote.h (REMOTE_SYSROOT_PREFIX): New define.
1695 (remote_filename_p): Add comment.
1696 * remote.c (remote_filename_p): Adjust to use
1697 REMOTE_SYSROOT_PREFIX.
1698 * solib.c (solib_find): When deciding whether we need to add a
1699 directory separator, check whether the sysroot is "remote:"
1700 instead of checking whether the patch has a drive spec. Add
1703 2013-09-27 Pedro Alves <palves@redhat.com>
1705 * remote.c (struct stop_reply) <solibs_changed, replay_event>:
1707 (remote_parse_stop_reply): Adjust, setting event->ws.kind
1710 2013-09-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1712 Fix set debug frame output.
1713 * frame.c (fprint_frame_type): Add TAILCALL_FRAME entry. Move
1714 SENTINEL_FRAME entry lower to match enum frame_type order.
1716 2013-09-26 Pierre Muller <muller@sourceware.org>
1718 Replace constant values 8 to 15 by AMD64_R8_REGNUM to
1719 AMD64_R15_REGNUM when a register index is expected.
1720 * amd64-windows-tdep.c (amd64_windows_dummy_call_integer_regs):
1721 Substitute in array.
1722 * amd64-tdep.c (amd64_dwarf_regmap): Ditto.
1723 (amd64_push_arguments): Substitute in integer_regnum array.
1725 2013-09-25 Doug Evans <dje@google.com>
1727 * objfiles.c (allocate_objfile): Move comment to better place.
1729 New option "set debug symfile on".
1730 * NEWS: Mention "set debug symfile".
1731 * Makefile.in (SFILES): Add symfile-debug.c.
1732 (COMMON_OBS): Add symfile-debug.o.
1733 * elfread.c (elf_symfile_read): Use objfile_set_sym_fns to set the
1734 objfile's symbol functions.
1735 * objfiles.h (objfile_set_sym_fns): Declare.
1736 * symfile-debug.c: New file.
1737 * symfile.c (syms_from_objfile_1): Use objfile_set_sym_fns to set the
1738 objfile's symbol functions.
1739 (reread_symbols): Ditto.
1741 * symfile.h (struct sym_fns): Delete member "sym_flavour".
1743 (add_symtab_fns): Update prototype.
1744 * symfile.c (sym_fns_ptr): Delete. Replace with ...
1745 (registered_sym_fns): ... this.
1746 (symtab_fns): Update.
1747 (add_symtab_fns): New arg "flavour". All callers updated.
1748 (find_sym_fns): Rewrite to use new sym_fns registry.
1750 * symfile.h (struct sym_fns): Add "objfile" argument to
1751 sym_read_linetable. All uses updated.
1753 * symtab.c (domain_name, search_domain_name): New functions.
1754 * symtab.h (domain_name, search_domain_name): Declare.
1756 * symfile.h (struct quick_symbol_functions): Reorg arg list of
1757 map_matching_symbols so objfile is first. All uses updated.
1758 * dwarf2read.c (dw2_map_matching_symbols): Update signature.
1759 * psymtab.c (map_matching_symbols_psymtab): Update signature.
1761 2013-09-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
1764 * solib-svr4.c (svr4_read_so_list): Skip the vDSO when reading
1767 2013-09-24 Doug Evans <dje@google.com>
1769 * objfiles.c (free_objfile): Move comment.
1771 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1773 * ada-exp.y (string_to_operator): Delete.
1774 (dummy_string_to_ada_operator): Delete.
1776 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1779 * i386-tdep.h (enum amd64_reg_class): New, moved here from
1781 (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
1782 call_dummy_integer_regs, and classify.
1783 * amd64-tdep.h (amd64_classify): Add declaration.
1784 * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
1785 (amd64_reg_class): Delete, moved to i386-tdep.h.
1786 (amd64_classify): Make non-static. Move declaration to amd64-tdep.h.
1787 Replace call to amd64_classify by call to tdep->classify.
1788 (amd64_push_arguments): Get the list of registers to use for
1789 passing integer parameters from the gdbarch tdep structure,
1790 rather than using a hardcoded one. Replace calls to amd64_classify
1791 by calls to tdep->classify.
1792 (amd64_push_dummy_call): Get the register number used for
1793 the "hidden" argument from tdep->call_dummy_integer_regs.
1794 (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
1795 and tdep->call_dummy_integer_regs. Set tdep->classify.
1797 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1800 * i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
1801 * amd64-tdep.c (amd64_push_arguments): Add handling of architectures
1802 where tdep->memory_args_by_pointer is non-zero.
1804 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1807 * i386-tdep.h (struct gdbarch_tdep): Add new field
1808 integer_param_regs_saved_in_caller_frame.
1809 * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
1810 stack if tdep->integer_param_regs_saved_in_caller_frame is set.
1812 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1814 * amd64-windows-tdep.c: #include "value.h"
1815 (amd64_windows_classify): Delete.
1816 (amd64_windows_passed_by_integer_register)
1817 (amd64_windows_passed_by_xmm_register)
1818 (amd64_windows_passed_by_pointer)
1819 (amd64_windows_adjust_args_passed_by_pointer)
1820 (amd64_windows_store_arg_in_reg, amd64_windows_push_arguments)
1821 (amd64_windows_push_dummy_call): New functions.
1822 (amd64_windows_init_abi): Remove setting of
1823 tdep->call_dummy_num_integer_regs, tdep->call_dummy_integer_regs,
1824 tdep->classify, tdep->memory_args_by_pointer and
1825 tdep->integer_param_regs_saved_in_caller_frame.
1826 Add call to set_gdbarch_push_dummy_call.
1828 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1830 * dwarf2read.c (open_and_init_dwp_file): Try open_dwp_file also with
1831 objfile->original_name.
1833 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1835 Pass down original filename for objfile.
1836 * coffread.c (coff_symfile_read): Update symbol_file_add_separate call.
1837 * elfread.c (elf_symfile_read): Likewise.
1838 * jit.c (jit_object_close_impl): Update allocate_objfile call, no
1839 longer set ORIGINAL_NAME.
1840 (jit_bfd_try_read_symtab): Update symbol_file_add_from_bfd call.
1841 * jv-lang.c (get_dynamics_objfile): Update allocate_objfile call.
1842 * machoread.c (macho_add_oso_symfile): Add parameter name. Update
1843 symbol_file_add_from_bfd call.
1844 (macho_symfile_read_all_oso): Update two macho_add_oso_symfile calls.
1845 (macho_check_dsym): Add parameter filenamep. Change function comment.
1847 (macho_symfile_read): New variable dsym_filename. Update
1848 macho_check_dsym call. Use it for symbol_file_add_separate.
1849 * objfiles.c (allocate_objfile): Add parameter name. New comment for
1850 it. Use it for objfile->original_name.
1851 (objfile_name): Return OBFD's filename, if available.
1852 * objfiles.h (allocate_objfile): Add new parameter name.
1853 * solib.c (solib_read_symbols): Update symbol_file_add_from_bfd call.
1854 * symfile-mem.c (symbol_file_add_from_memory): Update
1855 symbol_file_add_from_bfd call.
1856 * symfile.c (read_symbols): Update symbol_file_add_separate call, new
1858 (symbol_file_add_with_addrs): New parameter name, add function comment
1859 for it. Remove variable name. Update allocate_objfile call.
1860 (symbol_file_add_separate): New parameter name, add function comment
1861 for it. Update symbol_file_add_with_addrs call.
1862 (symbol_file_add_from_bfd): New parameter name. Update
1863 symbol_file_add_with_addrs call.
1864 (symbol_file_add): Update symbol_file_add_from_bfd call.
1865 (reread_symbols): New variable original_name. Save
1866 objfile->original_name by it.
1867 * symfile.h (symbol_file_add_from_bfd, symbol_file_add_separate): Add
1870 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1872 Code cleanup: Add objfile_name accessor function.
1873 * ada-lang.c (is_known_support_routine): Use objfile_name.
1874 * auto-load.c (source_gdb_script_for_objfile)
1875 (auto_load_objfile_script): Likewise.
1876 * coffread.c (coff_symtab_read, read_one_sym): Likewise.
1877 * dbxread.c (dbx_symfile_read): Likewise.
1878 * dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
1879 * dwarf2loc.c (locexpr_describe_location_piece): Likewise.
1880 * dwarf2read.c (dwarf2_get_dwz_file, dwarf2_read_index)
1881 (dw2_symtab_iter_next, dw2_expand_symtabs_matching)
1882 (lookup_dwp_signatured_type, lookup_dwo_unit)
1883 (dwarf2_build_psymtabs_hard, scan_partial_symbols, process_queue)
1884 (fixup_go_packaging, process_imported_unit_die, dwarf2_physname)
1885 (read_import_statement, create_dwo_cu, open_and_init_dwp_file)
1886 (lookup_dwo_cutu, read_call_site_scope, dwarf2_ranges_read)
1887 (dwarf2_record_block_ranges, read_common_block, read_typedef)
1888 (read_subrange_type, load_partial_dies, read_partial_die)
1889 (read_addr_index_1, read_str_index, dwarf_decode_lines_1)
1890 (die_containing_type, build_error_marker_type, lookup_die_type)
1891 (follow_die_ref_or_sig, follow_die_ref, dwarf2_fetch_die_loc_sect_off)
1892 (dwarf2_fetch_constant_bytes, follow_die_sig, get_signatured_type)
1893 (get_DW_AT_signature_type, write_psymtabs_to_index)
1894 (save_gdb_index_command): Likewise.
1895 * elfread.c (find_separate_debug_file_by_buildid, elf_symfile_read):
1897 * expprint.c (dump_subexp_body_standard): Likewise.
1898 * gdbtypes.c (type_name_no_tag_or_error): Likewise.
1899 * jit.c (jit_object_close_impl): Use the objfile field name renamed to
1901 * linux-thread-db.c (try_thread_db_load_from_pdir_1): New variable
1902 obj_name, use objfile_name for it, use the variable.
1903 (try_thread_db_load_from_pdir, has_libpthread, thread_db_new_objfile):
1905 * machoread.c (macho_symtab_read, macho_check_dsym)
1906 (macho_symfile_relocate): Likewise.
1907 * maint.c (maintenance_translate_address): Likewise.
1908 * minidebug.c (find_separate_debug_file_in_section): Likewise.
1909 * minsyms.c (install_minimal_symbols): Likewise.
1910 * objfiles.c (allocate_objfile): Use the objfile field name renamed to
1912 (filter_overlapping_sections): Use objfile_name.
1913 (objfile_name): New function.
1914 * objfiles.h (struct objfile): Rename field name to original_name.
1915 (objfile_name): New prototype.
1916 * printcmd.c (sym_info, address_info): Use objfile_name.
1917 * probe.c (parse_probes, collect_probes, compare_probes)
1918 (info_probes_for_ops): Likewise.
1919 * progspace.c (clone_program_space): Likewise.
1920 * psymtab.c (require_partial_symbols, dump_psymtab, allocate_psymtab)
1921 (maintenance_info_psymtabs): Likewise.
1922 * python/py-auto-load.c (gdbpy_load_auto_script_for_objfile)
1923 (source_section_scripts): Likewise.
1924 * python/py-objfile.c (objfpy_get_filename): Likewise.
1925 * python/py-progspace.c (pspy_get_filename): Likewise.
1926 * solib-aix.c (solib_aix_get_toc_value): Likewise.
1927 * solib-som.c (match_main, som_solib_section_offsets): Likewise.
1928 * solib.c (solib_read_symbols): Likewise.
1929 * stabsread.c (scan_file_globals): Likewise.
1930 * stap-probe.c (handle_stap_probe): Likewise.
1931 * symfile.c (symbol_file_clear, separate_debug_file_exists)
1932 (find_separate_debug_file_by_debuglink): Likewise.
1933 (reread_symbols): Likewise. Use the objfile field name renamed to
1935 (allocate_symtab): Use objfile_name.
1936 * symmisc.c (print_symbol_bcache_statistics, print_objfile_statistics)
1937 (dump_objfile, dump_msymbols, dump_symtab_1)
1938 (maintenance_print_msymbols, maintenance_print_objfiles)
1939 (maintenance_info_symtabs, maintenance_check_symtabs): Likewise.
1940 * target.c (target_translate_tls_address, target_info): Likewise.
1941 * xcoffread.c (xcoff_initial_scan): Make variable name const. Use
1944 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1947 * probe.c (parse_probes): Rename variable objfile_name to
1950 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1952 Remove solib-sunos.c.
1953 * Makefile.in (ALLDEPFILES): Remove solib-sunos.c.
1954 * config/m68k/obsd.mh (NATDEPFILES): Remove solib-sunos.o.
1955 * objfiles.c (rt_common_objfile): Remove.
1956 (free_objfile): Remove rt_common_objfile comparison.
1957 * objfiles.h (rt_common_objfile): Remove.
1958 * solib-sunos.c: Remove.
1959 * symfile.c (reread_symbols): Remove solib-sunos.c comment.
1961 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1963 Remove a.out NetBSD and OpenBSD hosts.
1964 * NEWS (Removed native configurations): New.
1965 * config/arm/nbsdaout.mh: Remove.
1966 * config/i386/nbsdaout.mh: Remove.
1967 * config/i386/obsdaout.mh: Remove.
1968 * config/m68k/nbsdaout.mh: Remove.
1969 * config/sparc/nbsdaout.mh: Remove.
1970 * config/vax/nbsdaout.mh: Remove.
1971 * configure.host (arm*-*-netbsd*, i[34567]86-*-netbsd*)
1972 (i[34567]86-*-openbsd[0-2].*, i[34567]86-*-openbsd3.[0-3])
1973 (m68*-*-netbsd*, sparc-*-netbsd*, vax-*-netbsd*): Add them to obsolete
1975 (arm*-*-netbsd*, i[34567]86-*-netbsd*, i[34567]86-*-openbsd[0-2].*)
1976 (i[34567]86-*-openbsd3.[0-3], m68*-*-netbsd*, sparc-*-netbsdaout*)
1977 (sparc-*-netbsd*, vax-*-netbsd*): Remove.
1979 2013-09-23 Tom Tromey <tromey@redhat.com>
1981 * linespec.c (struct minsym_and_objfile): Remove.
1982 (minsym_and_objfile_d): Remove.
1983 (struct linespec, struct collect_info, linespec_parse_basic)
1984 (convert_linespec_to_sals, linespec_parser_delete, decode_objc)
1985 (compare_msymbols, find_method, find_function_symbols)
1986 (find_linespec_symbols, struct collect_minsyms, compare_msyms)
1987 (add_minsym, search_minsyms_for_name): Update.
1989 2013-09-23 Andrew Burgess <aburgess@broadcom.com>
1991 * regcache.c: Add include of valprint.h.
1992 (dump_endian_bytes): Delete.
1993 (regcache_dump): Use print_hex_chars not dump_endian_bytes.
1995 2013-09-23 Andrew Burgess <aburgess@broadcom.com>
1997 * sh64-tdep.c (sh64_do_fp_register): Use print_hex_chars.
1999 2013-09-19 Pedro Alves <palves@redhat.com>
2001 * breakpoint.c (remove_threaded_breakpoints): Skip non-user
2004 2013-09-19 Pedro Alves <palves@redhat.com>
2005 Thomas Schwinge <thomas@codesourcery.com>
2006 Yue Lu <hacklu.newborn@gmail.com>
2008 * gnu-nat.c (gnu_read_inferior, gnu_write_inferior): Make static.
2009 Take a gdb_byte pointer instead of a char pointer.
2011 * gnu-nat.c (gnu_xfer_memory): Adjust interface as
2012 gnu_xfer_partial helper.
2013 (gnu_xfer_partial): New function.
2014 (gnu_target): Don't install a deprecated_xfer_memory hook.
2015 Install a to_xfer_partial hook.
2017 2013-09-19 Jan Kratochvil <jan.kratochvil@redhat.com>
2020 * main.c (captured_main): Replace catch_command_errors by
2021 catch_command_errors_const. Twice.
2022 * symfile.c (symbol_file_add_main_1): Make args parameter const.
2023 (symbol_file_add): Make name parameter const.
2024 (symbol_file_add_main, symbol_file_add_main_1): Make args parameter const.
2025 (symfile_bfd_open): Make name parameter const, rename it to cname. Add
2026 variable name. Change their usage accordingly.
2027 * symfile.h (symbol_file_add, symfile_bfd_open): Make first parameter
2029 (symbol_file_add_main): Make args parameter const.
2031 2013-09-18 Raunaq Bathija <raunaq12@in.ibm.com>
2032 Ulrich Weigand <uweigand@de.ibm.com>
2034 * xcoffread.c (struct coff_symbol): Use CORE_ADDR as type
2036 (read_xcoff_symtab): Use CORE_ADDR as type of fcn_start_addr.
2038 2013-09-18 Pedro Alves <palves@redhat.com>
2039 Yue Lu <hacklu.newborn@gmail.com>
2041 * gnu-nat.c (inf_validate_procs, gnu_wait, gnu_resume)
2042 (gnu_create_inferior)
2043 (gnu_attach, gnu_thread_alive, gnu_pid_to_str, cur_thread)
2044 (set_sig_thread_cmd): Use the lwpid field of ptids to
2045 store/extract thread ids instead of the tid field.
2046 * i386gnu-nat.c (gnu_fetch_registers): Adjust.
2048 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
2050 * infcmd.c (default_print_one_register_info): Add detection of
2051 optimized out values.
2052 (default_print_registers_info): Switch to using
2053 get_frame_register_value.
2055 2013-09-18 Markus Metzger <markus.t.metzger@intel.com>
2057 * infrun.c (handle_inferior_event): Check if we know the
2058 function start address before setting a resume breakpoint.
2060 2013-09-18 Pedro Alves <palves@redhat.com>
2062 * gnu-nat.c (set_sig_thread_cmd): Compare the thread's ptid to
2063 minus_one_ptid instead of looking at the ptid's tid field and
2064 comparing that to -1.
2066 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
2068 * main.h (get_gdb_program_name): Remove extra whitespace.
2070 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
2072 * main.h (get_gdb_program_name): Add declaration.
2073 * main.c (get_gdb_program_name): Add definition.
2075 2013-09-17 Doug Evans <dje@google.com>
2077 * dwarf2read.c: Move definitions of complaint functions to after
2078 forward declarations of local functions.
2080 2013-09-17 Muhammad Waqas <mwaqas@codesourcery.com>
2081 Pedro Alves <palves@redhat.com>
2084 * breakpoint.c (remove_threaded_breakpoints): New function.
2085 (_initialize_breakpoint): Attach remove_threaded_breakpoints
2086 as thread_exit observer.
2088 2013-09-17 Pedro Alves <palves@redhat.com>
2091 * ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
2092 * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
2093 * corelow.c (core_open):
2094 * frame.h (print_stack_frame, print_frame_info): New
2095 'set_current_sal' parameter.
2096 * infcmd.c (finish_command, kill_command): Adjust call to
2098 * inferior.c (inferior_command): Likewise.
2099 * infrun.c (normal_stop): Likewise.
2100 * linux-fork.c (linux_fork_context): Likewise.
2101 * record-full.c (record_full_goto_entry, record_full_restore):
2103 * remote-mips.c (common_open): Likewise.
2104 * stack.c (print_stack_frame): New 'set_current_sal' parameter.
2106 (print_frame_info): New 'set_current_sal' parameter. Set the last
2107 displayed sal depending on the new paremeter instead of looking at
2109 (backtrace_command_1, select_and_print_frame, frame_command)
2110 (current_frame_command, up_command, down_command): Adjust call to
2112 * thread.c (print_thread_info, restore_selected_frame)
2113 (do_captured_thread_select): Adjust call to print_stack_frame.
2114 * tracepoint.c (tfind_1): Likewise.
2115 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
2116 (mi_cmd_stack_info_frame): Likewise.
2117 * mi/mi-interp.c (mi_on_normal_stop): Likewise.
2118 * mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.
2120 2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
2122 * value.c (isvoid_internal_fn): Replace "parameter" with
2125 2013-09-16 Stan Shebs <stan@codesourcery.com>
2127 * README: Update references to writing code for GDB.
2128 * configure.ac (build_warnings): Remove obsolete comment.
2129 * configure: Regenerate.
2130 * gdbarch.sh: Remove references to gdbint.texinfo.
2131 * gdbarch.h: Regenerate.
2132 * gdbtypes.c (objfile_type): Remove comments referencing internals
2135 2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
2137 * NEWS: Mention new convenience function $_isvoid.
2138 * value.c (isvoid_internal_fn): New function.
2139 (_initialize_values): Add new convenience function $_isvoid.
2141 2013-09-16 Pierre Muller <muller@sourceware.org>
2143 * arm-linux-tdep.c: Add "elf/common.h" header.
2144 Remove AT_HWCAP macro definintion as it is provided in
2146 * s390-tdep.c: Remove system header <elf.h>
2147 Add "elf/common.h" header for AT_HWCAP definition.
2148 (s390_core_read_description): Use correct CORE_ADDR
2149 for hwcap local variable used as third parameter
2150 of function target_auxv_search.
2152 2013-09-14 Pierre Muller <muller@sourceware.org>
2153 Tom Tromey <tromey@redhat.com>
2154 Pedro Alves <palves@redhat.com>
2156 * common/filestuff.c (gdb_fopen_cloexec): Do not try to use "e"
2157 mode if operating system doesn't know O_CLOEXEC.
2159 2013-09-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2162 * symfile.c (reread_symbols): Move variable obfd_filename to a more
2165 2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
2167 * NEWS: Mention TDB support.
2168 * features/s390-tdb.xml: New file.
2169 * features/s390-te-linux64.xml: New file.
2170 * features/s390x-te-linux64.xml: New file.
2171 * features/Makefile (WHICH): Add new tdescs above.
2172 (s390-te-linux64-expedite): Set.
2173 (s390x-te-linux64-expedite): Set.
2174 * features/s390-te-linux64.c: New file (generated).
2175 * features/s390x-te-linux64.c: New file (generated).
2176 * regformats/s390-te-linux64.dat: New file (generated).
2177 * regformats/s390x-te-linux64.dat: New file (generated).
2178 * s390-tdep.h (HWCAP_S390_HIGH_GPRS): Define.
2179 (HWCAP_S390_TE): Likewise.
2180 (S390_TDB_DWORD0_REGNUM): Likewise.
2181 (S390_TDB_DWORD0_REGNUM): Likewise.
2182 (S390_TDB_ABORT_CODE_REGNUM): Likewise.
2183 (S390_TDB_CONFLICT_TOKEN_REGNUM): Likewise.
2184 (S390_TDB_ATIA_REGNUM): Likewise.
2185 (S390_TDB_R0_REGNUM): Likewise.
2186 (S390_TDB_R1_REGNUM): Likewise.
2187 (S390_TDB_R2_REGNUM): Likewise.
2188 (S390_TDB_R3_REGNUM): Likewise.
2189 (S390_TDB_R4_REGNUM): Likewise.
2190 (S390_TDB_R5_REGNUM): Likewise.
2191 (S390_TDB_R6_REGNUM): Likewise.
2192 (S390_TDB_R7_REGNUM): Likewise.
2193 (S390_TDB_R8_REGNUM): Likewise.
2194 (S390_TDB_R9_REGNUM): Likewise.
2195 (S390_TDB_R10_REGNUM): Likewise.
2196 (S390_TDB_R11_REGNUM): Likewise.
2197 (S390_TDB_R12_REGNUM): Likewise.
2198 (S390_TDB_R13_REGNUM): Likewise.
2199 (S390_TDB_R14_REGNUM): Likewise.
2200 (S390_TDB_R15_REGNUM): Likewise.
2201 (S390_NUM_REGS): Increase.
2202 (S390_IS_TDBREGSET_REGNUM): New macro.
2203 (s390_regmap_tdb): Declare.
2204 (s390_sizeof_tdbregset): Define.
2205 (tdesc_s390_te_linux64): Declare.
2206 (tdesc_s390x_te_linux64): Likewise.
2207 * s390-tdep.c: Add includes for "auxv.h", <elf.h>,
2208 "features/s390-te-linux64.c", and "features/s390x-te-linux64.c".
2209 (s390_regmap_tdb): New regmap.
2210 (s390_supply_tdb_regset): New function.
2211 (s390_tdb_regset): New regset.
2212 (s390_linux64v2_regset_sections): Add TDB regset to list.
2213 (s390x_linux64v2_regset_sections): Likewise.
2214 (s390_regset_from_core_section): Recognize TDB core note section.
2215 (s390_core_read_description): If HWCAP indicates TE support,
2216 select tdesc_s390_te_linux64 or tdesc_s390_s390x_te_linux64.
2217 (s390_gdbarch_init): Handle TDB regset.
2218 (_initialize_s390_tdep): Initialize new tdescs.
2219 * s390-nat.c (HWCAP_S390_HIGH_GPRS): Remove define.
2220 (have_regset_tdb): New variable.
2221 (s390_native_supply): Support register invalidation.
2222 (fetch_regset): Invalidate registers if ptrace yields ENODATA.
2223 (check_regset): Treat ENODATA as "regset exists".
2224 (s390_linux_fetch_inferior_registers): Add TDB.
2225 (s390_read_description): Check for TDB existence and select
2227 * gdbserver/Makefile.in (clean): Add removal of new makefile
2229 (s390-te-linux64.c): New makefile target.
2230 (s390x-te-linux64.c): Likewise.
2231 * gdbserver/configure.srv (srv_regobj): Append new objects
2232 s390-te-linux64.o and s390x-te-linux64.o.
2233 (srv_xmlfiles): Append new files s390-te-linux64.xml,
2234 s390x-te-linux64.xml, and s390-tdb.xml.
2235 * gdbserver/linux-s390-low.c (init_registers_s390_te_linux64): New
2237 (tdesc_s390_te_linux64): Likewise.
2238 (init_registers_s390x_te_linux64): Likewise.
2239 (tdesc_s390x_te_linux64): Likewise.
2240 (s390_check_regset): Treat ENODATA as "regset exists".
2241 (s390_arch_setup): Add TDB regset support.
2242 (initialize_low_arch): Initialize registers for new tdescs.
2244 2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
2246 * s390-tdep.h (S390_IS_GREGSET_REGNUM): New macro.
2247 (S390_IS_FPREGSET_REGNUM): New macro.
2248 * s390-tdep.c (s390_dwarf_regmap): Make const.
2249 (regnum_is_gpr_full): New function for replacing repeated code.
2250 (s390_pseudo_register_name): Use it.
2251 (s390_pseudo_register_type): Likewise.
2252 (s390_pseudo_register_read): Likewise.
2253 (s390_pseudo_register_write): Likewise.
2254 (s390_unwind_pseudo_register): Likewise.
2255 (s390_regmap_gregset): New format for regmap.
2256 (s390x_regmap_gregset): Likewise.
2257 (s390_regmap_fpregset): Likewise.
2258 (s390_regmap_upper): Likewise.
2259 (s390_regmap_last_break): Likewise.
2260 (s390_regmap_system_call): Likewise.
2261 (s390_supply_regset): Adjust to new regmap format.
2262 (s390_collect_regset): Likewise.
2263 * s390-nat.c (s390_native_supply): Adjust to new regmap format.
2264 (s390_native_collect): Likewise.
2265 (supply_gregset): Likewise.
2266 (fill_gregset): Likewise.
2267 (supply_fpregset): Likewise.
2268 (fill_fpregset): Likewise.
2269 (fetch_regset): Likewise.
2270 (store_regset): Likewise.
2271 (s390_linux_fetch_inferior_registers): Likewise.
2272 (s390_linux_fetch_inferior_registers): Likewise.
2274 2013-09-12 Andrew Pinski <apinski@cavium.com>
2276 * aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Zero out regs.
2278 2013-09-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
2280 * config/s390/s390.mh (NATDEPFILES): Add linux-waitpid.o.
2282 2013-09-09 Andrew Burgess <aburgess@broadcom.com>
2284 * top.c (quit_confirm): Remove use of deprecated_init_ui_hook.
2286 2013-09-06 Pedro Alves <palves@redhat.com>
2288 * remote-sim.c (dump_mem, gdbsim_fetch_register)
2289 (gdbsim_store_register, gdbsim_kill, gdbsim_load)
2290 (gdbsim_create_inferior, gdbsim_open, gdbsim_close)
2291 (gdbsim_detach, gdbsim_resume_inferior, gdbsim_wait)
2292 (gdbsim_files_info, gdbsim_mourn_inferior): Send debug output to
2295 2013-09-06 Pedro Alves <palves@redhat.com>
2297 * remote-sim.c (dump_mem): Constify buf parameter.
2298 gdbsim_xfer_inferior_memory): Rename to ...
2299 (gdbsim_xfer_memory): ... this. Adjust interface as
2300 target_xfer_partial helper.
2301 (gdbsim_xfer_partial): New function.
2302 (init_gdbsim_ops): Don't install a deprecated_xfer_memory hook.
2303 Install a to_xfer_partial hook. Send output to gdb_stdlog.
2305 2013-09-06 Pedro Alves <palves@redhat.com>
2307 * remote-sim.c (gdbsim_xfer_inferior_memory): Use
2308 host_address_to_string, and send debug output to gdb_stdlog.
2310 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
2312 * Makefile.in (ALL_TARGET_OBS): Add cris-linux-tdep.o.
2313 * configure.tgt: Add cris-linux-tdep.o and linux-tdep.o to
2314 gdb_target_obs for cris target.
2315 * cris-tdep.c (struct gdbarch_tdep): Move to cris-tdep.h.
2316 (cris_gdbarch_init): Move calls to
2317 set_gdbarch_fetch_tls_load_module_address and
2318 set_solib_svr4_fetch_link_map_offsets to cris-linux-tdep.c.
2319 Add call to gdbarch_init_osabi.
2320 * cris-linux-tdep.c: New file.
2321 * cris-tdep.h: New file.
2323 2013-09-06 Andrew Burgess <aburgess@broadcom.com>
2325 * tui/tui-io.c (tui_initialize_io): Remove legacy comment referring
2326 to deprecated_init_ui_hook.
2328 2013-09-06 Andrew Burgess <aburgess@broadcom.com>
2330 * cli/cli-interp.c (_initialize_cli_interp): Add a
2331 command_loop_proc to interp_procs.
2332 * event-top.c (cli_command_loop): Change signature to match
2333 interp_command_loop_ftype.
2334 * event-top.h (cli_command_loop): Same.
2335 * interps.c (interp_new): Require every interpreter to have a
2337 (current_interp_command_loop): Just call the command_loop_proc on
2338 the current interpreter.
2339 * tui/tui-interp.c (_initialize_tui_interp): Add a
2340 command_loop_proc to interp_procs.
2342 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
2344 * cris-tdep.c (cris_gdbarch_init): Add call to
2345 get_gdbarch_fetch_tls_load_module_address.
2347 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
2349 * cris-tdep.c (cris_elf_greg_t): Rename from elf_greg_t.
2350 (cris_elf_gregset_t): Rename from elf_gregset_t.
2351 (crisv32_elf_gregset_t): Adjust.
2352 (cris_supply_gregset, fetch_core_registers): Adjust.
2354 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
2356 * cris-tdep.c (elf_greg_t): Change typedef to unsigned char[4]
2358 2013-09-05 Andrew Burgess <aburgess@broadcom.com>
2360 * defs.h (deprecated_command_loop_hook): Remove, including
2361 references in comments.
2362 * interps.c (current_interp_command_loop): No longer use
2363 deprecated_command_loop_hook.
2364 (clear_interpreter_hooks): Remove deprecated_command_loop_hook
2366 * top.c (deprecated_command_loop_hook): Remove.
2368 2013-09-05 Pedro Alves <palves@redhat.com>
2370 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): 'dwarf_regnum'
2371 local is now int instead of ULONGEST. Print it with %d
2372 instead of paddress.
2374 2013-09-05 Tristan Gingold <gingold@adacore.com>
2376 * MAINTAINERS: Remove avr maintainership.
2378 2013-09-05 Pedro Alves <palves@redhat.com>
2380 * findvar.c (value_of_register): Rework in terms of
2381 value_of_register_lazy.
2383 2013-09-05 Muhammad Bilal <mbilal@codesourcery.com>
2385 * symfile.c (add_symbol_file_command): Remove trailing
2386 whitespaces and blank line after comment.
2388 2013-09-05 Pedro Alves <palves@redhat.com>
2390 * tui/tui-regs.c (tui_register_format): Don't look at the
2391 register's name here. Return string representing register
2392 value instead of storing it in the data element.
2393 (tui_get_register): Compare register string representations
2394 instead of register value states and contents.
2396 2013-09-05 Pedro Alves <palves@redhat.com>
2399 * tui/tui-regs.c (tui_show_registers): Show registers of the
2400 selected frame, not the current frame.
2402 2013-09-05 Ricard Wanderlof <ricardw@axis.com>
2404 * MAINTAINERS (Write After Approval): Add myself to the list.
2406 2013-09-04 Doug Evans <dje@google.com>
2408 * dwarf2read.c (queue_and_load_all_dwo_tus): New function.
2409 (queue_and_load_dwo_tu): New function.
2410 (lookup_dwo_signatured_type): Set per_cu.tu_read.
2411 (maybe_queue_comp_unit): Rename this_cu argument to dependent_cu.
2412 Make dependent_cu optional.
2413 (dw2_do_instantiate_symtab): If we just loaded a CU from a DWO,
2414 and an older .gdb_index is in use, queue and load all its TUs too.
2416 2013-09-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2418 Code cleanup: Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH.
2419 * cli/cli-cmds.c (find_and_open_script): Add OPF_RETURN_REALPATH to
2420 variable search_flags.
2421 * defs.h (OPF_DISABLE_REALPATH): Rename to ...
2422 (OPF_RETURN_REALPATH): ... here.
2423 * dwarf2read.c (try_open_dwop_file): Set OPF_RETURN_REALPATH for flags.
2424 * exec.c (exec_file_attach): Remove OPF_DISABLE_REALPATH from openp
2426 * nto-tdep.c (nto_find_and_open_solib): Add OPF_RETURN_REALPATH for
2428 * solib.c (solib_find): Likewise. Four times.
2429 * source.c (openp): Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH
2430 in the function comment and for the realpath_fptr variable.
2431 (source_full_path_of): Add OPF_RETURN_REALPATH for openp call.
2432 (find_and_open_source): Likewise. Twice.
2433 * symfile.c (symfile_bfd_open): Likewise, also twice.
2435 2013-09-04 Doug Evans <dje@google.com>
2437 * progspace.c (save_current_space_and_thread): Remove unnecessary
2438 call to save_current_inferior.
2440 2013-09-04 Andrew Burgess <aburgess@broadcom.com>
2442 * sh64-tdep.c (sh64_do_register): Return after printing message
2443 about unavailable register contents.
2445 2013-09-04 Muhammad Bilal <mbilal@codesourcery.com>
2446 Pedro Alves <palves@redhat.com>
2448 * symfile.c (add_symbol_file_command): Error out on unknown
2449 option. Handle EXPECTING_SEC_ADDR/EXPECTING_SEC_NAME before '-'
2450 options and collapse into single conditional branch.
2452 2013-09-03 Luis Machado <lgustavo@codesourcery.com>
2454 * inf-child.c (inf_child_follow_fork): New parameter
2456 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise.
2457 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
2458 * inferior.h (detach_fork): Remove.
2459 * infrun.c (detach_fork): Adjust comment and make it
2461 (follow_fork): Pass detach_fork parameter to
2463 * linux-nat.c (linux_child_follow_fork): New parameter
2465 * target.c (target_follow_fork): New parameter detach_fork.
2466 Pass detach_fork as parameter and print its value.
2467 * target.h (struct target_ops) <to_follow_fork>: New int
2469 (target_follow_fork): New parameter detach_fork.
2471 2013-09-03 Joel Brobecker <brobecker@adacore.com>
2473 * solib-ia64-hpux.c (ia64_hpux_relocate_section_addresses):
2474 Replace sec->bfd by sec->the_bfd_section->owner.
2476 2013-09-03 Yao Qi <yao@codesourcery.com>
2478 * linux-tdep.c (linux_is_uclinux): New function. Code moved
2479 from linux_has_shared_address_space.
2480 (linux_has_shared_address_space): Call linux_is_uclinux.
2481 * linux-tdep.h (linux_is_uclinux): Declare.
2482 * m68klinux-tdep.c (m68k_linux_get_sigtramp_info): Call
2485 2013-09-03 Yao Qi <yao@codesourcery.com>
2487 * config/djgpp/fnchange.lst: Remove entry of
2488 i386-interix-nat.c and i386-interix-tdep.c.
2489 * configure.ac: Remove '*-*-interix*'.
2490 * configure: Re-generated.
2491 * defs.h (enum gdb_osabi): Remove GDB_OSABI_INTERIX.
2492 * i386-cygwin-tdep.c (i386_cygwin_osabi_sniffer): Remove
2494 * osabi.c (gdb_osabi_names): Remove "Interix".
2496 2013-09-03 Yao Qi <yao@codesourcery.com>
2498 * arch-utils.c: Fix typo in the comment to gdbarch_update_p.
2500 2013-09-02 Markus Metzger <markus.t.metzger@intel.com>
2502 * record.h (record_print_flag) <record_print_src_line,
2503 record_print_insn_range>: Rename into ...
2504 (record_print_flag) <record_print_src_line,
2505 record_print_insn_range>: ... this. Update all users.
2507 2013-09-02 Pierre Muller <muller@sourceware.org>
2509 * windows-nat.c (windows_xfer_memory): Handle ERROR_PARTIAL_COPY
2512 2013-09-02 Pierre Muller <muller@sourceware.org>
2514 * windows-nat.c (windows_xfer_memory): Fix compilation failure
2515 by use of plongest function.
2517 2013-09-02 Tristan Gingold <gingold@adacore.com>
2519 * NEWS: Add entry mentioning support for native Windows x64
2522 * amd64-windows-tdep.c: #include "objfiles.h", "frame-unwind.h",
2523 "coff/internal.h", "coff/i386.h", "coff/pe.h" and "libcoff.h".
2524 (struct amd64_windows_frame_cache): New struct.
2525 (amd64_windows_w2gdb_regnum): New global.
2526 (pc_in_range, amd64_windows_frame_decode_epilogue)
2527 (amd64_windows_frame_decode_insns, amd64_windows_find_unwind_info)
2528 (amd64_windows_frame_cache, amd64_windows_frame_prev_register)
2529 (amd64_windows_frame_this_id): New functions.
2530 (amd64_windows_frame_unwind): New static global.
2531 (amd64_windows_skip_prologue): New function.
2532 (amd64_windows_init_abi): Call frame_unwind_prepend_unwinder
2533 with amd64_windows_frame_unwind. Call set_gdbarch_skip_prologue
2534 with amd64_windows_skip_prologue.
2536 2013-08-30 Joel Brobecker <brobecker@adacore.com>
2540 2013-08-30 Pedro Alves <palves@redhat.com>
2542 * mi/mi-main.c (mi_cmd_trace_find): Use LOC_AND_ADDRESS instead of
2545 2013-08-30 Pedro Alves <palves@redhat.com>
2547 * thread.c (restore_selected_frame): Use SRC_AND_LOC, and change
2550 2013-08-30 Pedro Alves <palves@redhat.com>
2552 * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
2553 Adjust arguments to print_stack_frame.
2555 2013-08-30 Pedro Alves <palves@redhat.com>
2557 * ada-tasks.c (task_command_1): Write SRC_AND_LOC instead '1'.
2559 2013-08-30 Pedro Alves <palves@redhat.com>
2561 * frame.h (show_and_print_stack_frame): Delete declaration.
2563 2013-08-30 Phil Muldoon <pmuldoon@redhat.com>
2566 * python/py-arch.c (ARCHPY_REQUIRE_VALID): New macro.
2567 (archpy_name): Check for valid architecture.
2568 (archpy_disassemble): Ditto.
2570 2013-08-29 Joel Brobecker <brobecker@adacore.com>
2572 * rs6000-nat.c (rs6000_ptrace32): Cast "addr" to "uintptr_t"
2573 instead of "long long" in call to ptrace64.
2575 2013-08-29 Andrew Burgess <aburgess@broadcom.com>
2577 * mi/mi-interp.c (mi_command_loop): Change signature to match
2578 interp_command_loop_ftype.
2579 (mi1_command_loop): Remove.
2580 (mi2_command_loop): Remove.
2581 (mi3_command_loop): Remove.
2582 (mi_interpreter_resume): Remove setting of
2583 deprecated_command_loop_hook.
2584 (_initialize_mi_interp): Set mi_command_loop as the command loop
2587 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
2589 * valops.c (do_search_struct_field): Pass v2 instead of base_type to
2592 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
2594 * value.c (allocate_value_contents): Make static.
2595 * value.h (allocate_value_contents): Remove prototype.
2597 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
2599 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use value_at_lazy instead
2600 of assembling value via allocate_value_lazy and attribute setter.
2601 * findvar.c (default_read_var_value): Use value_at_lazy instead of
2602 assembling value via allocate_value_lazy and attribute setter.
2603 * valops.c (do_search_struct_field): Use value_at_lazy instead of
2604 assembling value via allocate_value_lazy and attribute setter.
2606 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
2608 * value.c (value_from_contents_and_address): Replace allocate_value and
2609 memcpy with value_from_contents.
2611 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
2613 * python/py-framefilter.c (py_print_frame): Remove usage of
2614 PyString_AsString. Use python_string_to_host_string instead.
2615 Refactor function to work with a string as a new allocation
2616 instead of a pointer.
2617 (py_print_frame): Ditto.
2618 * python/lib/gdb/frames.py (return_list): Cain iterators together
2619 instead of adding them as a list.
2620 (_sort_list): Call return_list, and remove duplicate code.
2621 (execute_frame_filters): Convert iterator to a list with list().
2622 * python/lib/gdb/command/frame_filters.py
2623 (SetFrameFilterPriority._set_filter_priority): Convert priority
2624 attribute to an integer.
2625 * python/lib/gdb/FrameIterator.py (FrameIterator.next): Define
2626 wrapper function __next__.
2627 * python/lib/gdb/FrameDecorator.py: If basestring not defined,
2630 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
2633 * python/py-framefilter.c (apply_frame_filter): Check
2634 gdb_python_initialized. Exit if the Python frame-filter code
2635 cannot be initialized.
2637 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
2640 * top.c (print_gdb_version): Remove erroneous newline after help
2643 2013-08-29 Yao Qi <yao@codesourcery.com>
2645 * varobj.c (install_dynamic_child): Remove trailing space.
2646 Add one blank line after variable declaration.
2648 2013-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2651 * corefile.c (get_exec_file): Use exec_filename.
2652 * defs.h (OPF_DISABLE_REALPATH): New definition. Add new comment.
2653 * exec.c (exec_close): Free EXEC_FILENAME.
2654 (exec_file_attach): New variable canonical_pathname. Use
2655 OPF_DISABLE_REALPATH. Call gdb_realpath explicitly. Set
2657 * exec.h (exec_filename): New.
2658 * inferior.c (print_inferior, inferior_command): Use
2659 PSPACE_EXEC_FILENAME.
2660 * mi/mi-main.c (print_one_inferior): Likewise.
2661 * progspace.c (clone_program_space, print_program_space): Likewise.
2662 * progspace.h (struct program_space): New field pspace_exec_filename.
2663 * source.c (openp): Describe OPF_DISABLE_REALPATH. New variable
2664 realpath_fptr, initialize it from OPF_DISABLE_REALPATH, use it.
2666 2013-08-28 Will Newton <will.newton@linaro.org>
2668 * common/linux-ptrace.c: Include stdint.h unconditionally.
2670 2013-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2673 * nto-tdep.c (nto_find_and_open_solib): Use OPF_TRY_CWD_FIRST.
2675 2013-08-28 Yao Qi <yao@codesourcery.com>
2676 Pedro Alves <palves@redhat.com>
2678 * event-top.c (gdb_setup_readline): Call stderr_fileopen
2679 instead of stdio_fileopen.
2680 * main.c (captured_main) [__MINGW32__]: Set stderr unbuffered.
2681 .Call stderr_fileopen instead of stdio_fileopen.
2682 * ui-file.c [__MINGW32__] (stderr_file_write): New function.
2683 [__MINGW32__] (stderr_file_fputs): New function.
2684 (stderr_fileopen): New function.
2685 * ui-file.h (stderr_fileopen): Declare.
2687 2013-08-27 Doug Evans <dje@google.com>
2689 * dwarf2read.c (struct dwarf2_cu): Tweak comment.
2690 (struct dwarf2_per_cu_data): Ditto.
2691 (maybe_queue_comp_unit): Delete forward decl. Add comment.
2692 (process_imported_unit_die): Ditto.
2693 (follow_die_sig_1): Simplify assert.
2695 2013-08-27 Pedro Alves <palves@redhat.com>
2697 * windows-nat.c (windows_xfer_memory): Adjust prototype to follow
2698 xfer_partial's interface. Return TARGET_XFER_E_IO on error.
2699 (windows_xfer_partial): Defer TARGET_OBJECT_MEMORY handling to
2700 windows_xfer_memory directly.
2701 (init_windows_ops): Don't install a deprecated_xfer_memory method.
2703 2013-08-27 Pedro Alves <palves@redhat.com>
2705 * darwin-nat.c (darwin_xfer_memory): Delete.
2706 (_initialize_darwin_inferior): Don't install a
2707 deprecated_xfer_memory method.
2709 2013-08-27 Pedro Alves <pedro@codesourcery.com>
2710 Yao Qi <yao@codesourcery.com>
2712 * mi/mi-cmd-stack.c (list_args_or_locals): Adjust prototype.
2713 (parse_no_frames_option): Remove.
2714 (mi_cmd_stack_list_locals): Handle --skip-unavailable.
2715 (mi_cmd_stack_list_args): Adjust.
2716 (mi_cmd_stack_list_variables): Handle --skip-unavailable.
2717 (list_arg_or_local): Add new parameter 'skip_unavailable'. Return
2718 early if SKIP_UNAVAILABLE is true and ARG->val is unavailable.
2720 (list_args_or_locals): New parameter 'skip_unavailable'.
2722 * valprint.c (scalar_type_p): Rename to ...
2723 (val_print_scalar_type_p): ... this. Make extern.
2724 (val_print, value_check_printable): Adjust.
2725 * valprint.h (val_print_scalar_type_p): Declare.
2726 * value.c (value_entirely_unavailable): New function.
2727 * value.h (value_entirely_unavailable): Declare.
2729 * NEWS: Mention the new option "--skip-unavailable" to MI
2730 commands '-stack-list-locals', '-stack-list-arguments' and
2731 '-stack-list-variables'.
2733 2013-08-27 Yao Qi <yao@codesourcery.com>
2735 * mi/mi-cmd-stack.c (parse_no_frames_option): Remove.
2736 (mi_cmd_stack_list_args): Use mi_getopt_silent to handle
2738 * mi/mi-getopt.c (mi_getopt): Remove.
2739 (mi_getopt_1): Renamed from mi_getopt. Add one parameter
2741 (mi_getopt): Call mi_getopt_1.
2742 (mi_getopt_silent): New.
2743 * mi/mi-getopt.h (mi_getopt_silent): Declare.
2745 2013-08-26 Doug Evans <dje@google.com>
2748 * dwarf2read.c (dw2_dump): Print some minimal information indicating
2749 .gdb_index is in use.
2750 * symfile.c (reread_symbols): Reset objfile->sf.
2752 * NEWS: Document "mt print objfiles" now takes optional regexp.
2753 * symmisc.c (maintenance_print_objfiles): Argument is now an optional
2754 regexp of objfiles to print.
2755 (_initialize_symmisc): Update doc string for "mt print objfiles".
2757 * dwarf2read.c (write_psymtabs_to_index): Move error checks ahead of
2758 missing debug info checks.
2760 2013-08-26 Raunaq Bathija <raunaq12@in.ibm.com>
2761 Ulrich Weigand <uweigand@de.ibm.com>
2763 * xcoffread.c (arrange_linetable): Add fix to correctly handle
2764 line tables generated by XLC compiled binaries.
2766 2013-08-23 Doug Evans <dje@google.com>
2768 * symmisc.c (dump_symtab): Delete prototype.
2769 (dump_msymbols, dump_objfile): Ditto.
2770 (maintenance_info_symtabs): Mark as dont_repeat.
2771 (_initialize_symmisc): Improve doc string for "mt info symtabs".
2773 * elfread.c (elf_symfile_read): Move "Done reading minimal symbols"
2774 debugging printf to better location.
2776 2013-08-23 Pedro Alves <palves@redhat.com>
2778 * target.c (target_read_live_memory): Change type of 'ret' local
2781 2013-08-23 Pedro Alves <palves@redhat.com>
2783 * remote.c (remote_write_bytes_aux, remote_write_bytes)
2784 (remote_read_bytes): Change return type to LONGEST, and adjust to
2785 return a target_xfer_error on error.
2786 (remote_xfer_memory): Delete.
2787 (remote_flash_write): Change type of 'ret' local to LONGEST.
2788 (remote_xfer_partial, remote_xfer_partial): Adjust.
2789 (init_remote_ops): Don't install a deprecated_xfer_memory hook.
2791 2013-08-23 Pierre Muller <muller@sourceware.org>
2793 ARI fix: Push # directives to start of line.
2794 * rs6000-nat.c (rs6000_ptrace32, rs6000_ptrace64): Rule applied.
2796 2013-08-12 Muhammad Waqas <mwaqas@codesourcery.com>
2799 * breakpoint.c (enable_command, disable_command): Iterate over
2800 all specified breakpoint locations.
2802 2013-08-22 Luis Machado <lgustavo@codesourcery.com>
2804 * common/linux-ptrace.c (linux_fork_to_function): Push #
2805 directives to the start of the line.
2806 (linux_check_ptrace_features): Fix warning message to use
2809 2013-08-22 Luis Machado <lgustavo@codesourcery.com>
2811 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-nat.h and
2812 nat/linux-waitpid.h.
2813 (linux-waitpid.o): New object file rule.
2814 * common/linux-ptrace.c: Include nat/linux-waitpid.h.
2815 (current_ptrace_options): Moved from linux-nat.c.
2816 (linux_ptrace_test_ret_to_nx): Use type casts for ptrace
2818 (linux_fork_to_function): New function.
2819 (linux_grandchild_function): Likewise.
2820 (linux_child_function): Likewise.
2821 (linux_check_ptrace_features): New function, heavily
2822 based on linux-nat.c:linux_test_for_tracefork.
2823 (linux_enable_event_reporting): New function.
2824 (ptrace_supports_feature): Likewise.
2825 (linux_supports_tracefork): Likewise.
2826 (linux_supports_traceclone): Likewise.
2827 (linux_supports_tracevforkdone): Likewise.
2828 (linux_supports_tracesysgood): Likewise.
2829 * common/linux-ptrace.h (HAS_NOMMU): Moved from
2830 gdbserver/linux-low.c.
2831 (linux_enable_event_reporting): New declaration.
2832 (linux_supports_tracefork): Likewise.
2833 (linux_supports_traceclone): Likewise.
2834 (linux_supports_tracevforkdone): Likewise.
2835 (linux_supports_tracesysgood): Likewise.
2836 * config.in (PTRACE_TYPE_ARG4): Regenerate.
2837 * config/aarch64/linux.mh (NATDEPFILES): Add linux-waitpid.o.
2838 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
2839 * config/arm/linux.mh (NATDEPFILES): Likewise.
2840 * config/i386/linux.mh (NATDEPFILES): Likewise.
2841 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2842 * config/ia64/linux.mh (NATDEPFILES): Likewise.
2843 * config/m32r/linux.mh (NATDEPFILES): Likewise.
2844 * config/m68k/linux.mh (NATDEPFILES): Likewise.
2845 * config/mips/linux.mh (NATDEPFILES): Likewise.
2846 * config/pa/linux.mh (NATDEPFILES): Likewise..
2847 * config/powerpc/linux.mh (NATDEPFILES): Likewise..
2848 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
2849 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
2850 * config/sparc/linux.mh (NATDEPFILES): Likewise.
2851 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
2852 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
2853 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
2854 * configure.ac (AC_CACHE_CHECK): Add void * to the list of
2855 ptrace's 4th argument's types.
2856 Check the type of PTRACE_TYPE_ARG4.
2857 * configure: Regenerate.
2858 * linux-nat.c: Include nat/linux-nat.h and nat/linux-waitpid.h.
2859 (SYSCALL_SIGTRAP): Moved to nat/linux-nat.h.
2860 (linux_supports_tracefork_flag): Remove.
2861 (linux_supports_tracesysgood_flag): Likewise.
2862 (linux_supports_tracevforkdone_flag): Likewise.
2863 (current_ptrace_options): Moved to
2864 common/linux-ptrace.c.
2865 (linux_tracefork_child): Remove.
2866 (my_waitpid): Remove.
2867 (linux_test_for_tracefork): Renamed to
2868 linux_check_ptrace_features and moved to common/linux-ptrace.c.
2869 (linux_test_for_tracesysgood): Remove.
2870 (linux_supports_tracesysgood): Remove.
2871 (linux_supports_tracefork): Remove.
2872 (linux_supports_tracevforkdone): Remove.
2873 (linux_enable_tracesysgood): Remove.
2874 (linux_enable_event_reporting): Remove.
2875 (linux_init_ptrace): New function.
2876 (linux_child_post_attach): Call linux_init_ptrace.
2877 (linux_child_post_startup_inferior): Call linux_init_ptrace.
2878 (linux_child_follow_fork): Call linux_supports_tracefork
2879 and linux_supports_tracevforkdone.
2880 (linux_child_insert_fork_catchpoint): Call
2881 linux_supports_tracefork.
2882 (linux_child_insert_vfork_catchpoint): Likewise.
2883 (linux_child_set_syscall_catchpoint): Call
2884 linux_supports_tracesysgood.
2885 (lin_lwp_attach_lwp): Call linux_supports_tracefork.
2886 * nat/linux-nat.h: New file.
2887 * nat/linux-waitpid.c: New file.
2888 * nat/linux-waitpid.h: New file.
2890 2013-08-22 Samuel Bronson <naesten@gmail.com>
2892 ARM Linux support for `catch syscall'.
2893 * syscalls/arm-linux.py: New file.
2894 * syscalls/arm-linux.xml: Likewise.
2895 * arm-linux-tdep.c (arm_linux_get_syscall_number): New function.
2896 (arm_linux_init_abi): Register the new function and syscall xml file.
2897 * data-directory/Makefile.in: Install the new syscall xml file.
2898 * NEWS: Brag about this.
2900 2013-08-22 Pedro Alves <palves@redhat.com>
2903 * corefile.c (target_xfer_memory_error): New function.
2904 (memory_error): Defer EIO to target_memory_error.
2905 (read_memory): Use target_xfer_partial, and handle finer-grained
2907 * target.c (target_xfer_error_to_string): New function.
2908 (memory_xfer_partial_1): If memory is known to be
2909 unavailable, return TARGET_XFER_E_UNAVAILABLE instead of -1.
2910 (target_xfer_partial): Make extern.
2911 * target.h (enum target_xfer_error): New enum.
2912 (target_xfer_error_to_string): Declare function.
2913 (target_xfer_partial): Declare function.
2914 (struct target_ops) <xfer_partial>: Adjust describing comment.
2916 2013-08-22 Alan Modra <amodra@gmail.com>
2918 * configure.host: Support powerpc64le-linux and powerpcle-linux hosts.
2919 * configure.tgt: Likewise as targets.
2921 2013-08-20 Doug Evans <dje@google.com>
2923 * buildsym.c (subfile_stack): Move here from buildsym.h.
2924 (pending_macros): Ditto.
2925 (get_macro_table): New function.
2926 (buildsym_init): Initialize subfile_stack.
2927 * coffread.c (type_vector,type_vector_length): Moved here from
2929 (INITIAL_TYPE_VECTOR_LENGTH): Ditto.
2930 (coff_symtab_read): Use it.
2931 * dbxread.c (read_ofile_symtab): Delete init of subfile_stack.
2932 * dwarf2read.c (macro_start_file): Replace uses of pending_macros
2933 with call to get_macro_table.
2934 * stabsread.c (type_vector,type_vector_length): Moved here from
2936 (INITIAL_TYPE_VECTOR_LENGTH): Ditto.
2937 * buildsym.h (get_macro_table): Declare.
2939 2013-08-20 Tom Tromey <tromey@redhat.com>
2941 * dbxread.c (record_minimal_symbol): Make 'name' argument const.
2943 (read_dbx_dynamic_symtab): Make 'name' const. Remove casts.
2945 2013-08-20 Doug Evans <dje@google.com>
2947 * blockframe.c: Remove #include "psymtab.h".
2948 * cp-support.c: Ditto.
2952 2013-08-20 Tom Tromey <tromey@redhat.com>
2955 * exceptions.h (return_mask): Now an enum.
2956 (RETURN_MASK_QUIT, RETURN_MASK_ERROR, RETURN_MASK_ALL): Now
2959 2013-08-20 Tom Tromey <tromey@redhat.com>
2961 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Use
2963 * elfread.c (elf_rel_plt_read, elf_gnu_ifunc_record_cache)
2964 (elf_gnu_ifunc_resolve_by_got): Use get_objfile_arch.
2965 * jit.c (jit_object_close_impl): Update.
2966 * jv-lang.c (get_dynamics_objfile): Update.
2967 * linespec.c (add_minsym): Use get_dynamics_objfile.
2968 * objfiles.c (get_objfile_bfd_data): Initialize 'gdbarch' field.
2969 (allocate_objfile): Don't initialize 'gdbarch' field.
2970 (get_objfile_arch): Update.
2971 * objfiles.h (struct objfile_per_bfd_storage) <gdbarch>: New field,
2973 (struct objfile) <gdbarch>: ... here. Remove.
2974 * stap-probe.c (stap_can_evaluate_probe_arguments): Use
2976 * symfile.c (init_entry_point_info): Use get_objfile_arch.
2978 2013-08-20 Alan Modra <amodra@gmail.com>
2980 * doublest.c (convert_floatformat_to_doublest): Use fmt->split_half
2981 for IBM long double nan and inf.
2982 (floatformat_is_negative, floatformat_classify,
2983 floatformat_mantissa): Similarly.
2984 (floatformat_ieee_single, floatformat_ieee_double,
2985 floatformat_ieee_quad, floatformat_arm_ext,
2986 floatformat_ia64_spill): Delete unused vars.
2987 (_initialize_doublest): Delete unused function.
2988 * gdbtypes.c (floatformats_ibm_long_double): Use new big- and
2989 little-endian variants of floatformat_ibm_long_double.
2991 2013-08-19 Luis Machado <lgustavo@codesourcery.com>
2993 * Makefile.in (SFILES): Remove common/target-common.c and
2994 add target/waitstatus.c.
2995 (HFILES_NO_SRCDIR): Remove common/target-common.h and add
2996 target/resume.h, target/wait.h and target/waitstatus.h.
2997 (COMMON_OBS): Remove target-common.o and add
2999 (target-common.o): Remove.
3000 (waitstatus.o): New target object file.
3001 * common/target-common.c: Move contents to
3002 target/waitstatus.c and remove.
3003 * common/target-common.h: Move contents to other files and
3005 (enum resume_kind: Move to target/resume.h.
3006 (TARGET_WNOHANG): Move to target/wait.h.
3007 (enum target_waitkind): Move to target/waitstatus.h.
3008 (struct target_waitstatus): Likewise.
3009 * target.h: Do not include target-common.h and
3010 include target/resume.h, target/wait.h and
3011 target/waitstatus.h.
3012 * target/resume.h: New file.
3013 * target/wait.h: New file.
3014 * target/waitstatus.h: New file.
3015 * target/waitstatus.c: New file.
3017 2013-08-19 Pedro Alves <palves@redhat.com>
3019 * linux-nat.c (linux_test_for_tracefork)
3020 (linux_test_for_tracesysgood, linux_child_follow_fork)
3021 (lin_lwp_attach_lwp, linux_nat_resume): Don't block child signals.
3022 (linux_nat_wait_1): Extend comment.
3023 (linux_async_pipe): Add comment.
3025 2013-08-15 Kevin Buettner <kevinb@redhat.com>
3027 * rl78-tdep.c (RL78_RAW_PC_REGNUM): New enum.
3028 (RL78_PC_REGNUM): Move to list of pseudo-register enums.
3029 (rl78_register_type, rl78_register_name, rl78_register_reggroup_p):
3030 Update to account for fact that PC is now a pseudo-register.
3031 (rl78_pseudo_register_write, rl78_pseudo_register_read): Add
3032 cases for RL78_PC_REGNUM.
3034 2013-08-15 Muhammad Bilal <mbilal@codesourcery.com>
3037 * top.c (quit_force): Skip writing history file
3038 if input is not from terminal.
3040 2013-08-14 Tom Tromey <tromey@redhat.com>
3042 * remote.c (struct remote_state) <echo_nextthread, nextthread,
3043 resultthreadlist>: New fields.
3044 (OPAQUETHREADBYTES, threadref, MAXTHREADLISTRESULTS): Move earlier.
3045 (remote_get_threadlist, remote_threadlist_iterator): Use
3046 new fields. Remove static variables.
3048 2013-08-14 Tom Tromey <tromey@redhat.com>
3050 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p,
3051 remote_watch_data_address>: New fields.
3052 (remote_stopped_by_watchpoint_p, remote_watch_data_address): Remove.
3053 (process_stop_reply, remote_wait_as)
3054 (remote_check_watch_resources, remote_stopped_data_address): Update.
3056 2013-08-14 Tom Tromey <tromey@redhat.com>
3058 * remote.c (struct remote_state) <async_client_callback,
3059 async_client_context>: New fields.
3060 (async_client_callback, async_client_context): Remove.
3061 (remote_async_serial_handler, remote_async): Update.
3063 2013-08-14 Tom Tromey <tromey@redhat.com>
3065 * remote.c (sizeof_pkt): Remove.
3066 (remote_trace_find): Use rs->buf_size, not sizeof_pkt.
3068 2013-08-14 Tom Tromey <tromey@redhat.com>
3070 * remote.c (struct remote_state) <use_threadinfo_query,
3071 use_threadextra_query>: New fields.
3072 (remote_threads_info, remote_threads_extra_info)
3073 (remote_open_1): Update.
3075 2013-08-14 Tom Tromey <tromey@redhat.com>
3077 * remote.c (struct remote_state) <finished_object,
3078 finished_annex, finished_offset>: New fields.
3079 (remote_read_qxfer): Use remote_state fields; remove static
3082 2013-08-14 Tom Tromey <tromey@redhat.com>
3084 * remote.c (struct remote_state) <last_sent_step>:
3086 (last_sent_step): Remove.
3087 (remote_resume, remote_wait_as): Update.
3089 2013-08-14 Tom Tromey <tromey@redhat.com>
3091 * remote.c (struct remote_state) <last_sent_signal>:
3093 (last_sent_signal): Remove.
3094 (new_remote_state, remote_resume, remote_wait_as): Update.
3096 2013-08-14 Tom Tromey <tromey@redhat.com>
3098 * remote.c (struct remote_state) <last_program_signals_packet>:
3100 (last_program_signals_packet): Remove.
3101 (remote_program_signals, remote_open_1): Update.
3103 2013-08-14 Tom Tromey <tromey@redhat.com>
3105 * remote.c (struct remote_state) <last_pass_packet>:
3107 (last_pass_packet): Remove.
3108 (remote_pass_signals, remote_open_1): Update.
3110 2013-08-14 Tom Tromey <tromey@redhat.com>
3112 * remote.c (struct remote_state) <remote_traceframe_number>:
3114 (remote_traceframe_number): Remove.
3115 (new_remote_state, remote_open_1, set_remote_traceframe)
3116 (remote_trace_find): Update.
3118 2013-08-14 Tom Tromey <tromey@redhat.com>
3120 * remote.c (struct remote_state) <general_thread, continue_thread>:
3122 (general_thread, continue_thread): Remove.
3123 (record_currthread, set_thread, set_general_process)
3124 (remote_open_1, extended_remote_attach_1, remote_wait_as)
3125 (extended_remote_mourn_1): Update.
3127 2013-08-14 Tom Tromey <tromey@redhat.com>
3129 * remote.c (struct remote_state) <remote_desc>: New field.
3130 (remote_desc): Remove.
3131 (remote_threads_info, remote_threads_extra_info, remote_close)
3132 (send_interrupt_sequence, remote_start_remote, remote_open_1)
3133 (readchar, remote_xfer_partial, remote_rcmd, packet_command)
3134 (remote_hostio_send_command, remote_file_put, remote_file_get)
3135 (remote_file_delete, remote_can_async_p, remote_is_async_p)
3136 (remote_async, remote_new_objfile, set_range_stepping): Update.
3138 2013-08-14 Tom Tromey <tromey@redhat.com>
3140 * remote.c (remote_state): Now a pointer.
3141 (get_remote_state_raw): Update.
3142 (new_remote_state): New function.
3143 (_initialize_remote): Use new_remote_state.
3145 2013-08-14 Tom Tromey <tromey@redhat.com>
3147 * remote.c (remote_protocol_features): Now const.
3149 2013-08-14 Tom Tromey <tromey@redhat.com>
3151 * remote.c (crc32_table, crc32): Remove.
3152 (remote_verify_memory): Use xcrc32.
3154 2013-08-13 Sergio Durigan Junior <sergiodj@redhat.com>
3156 * value.h (create_internalvar_type_lazy): Adjust prototype
3159 2013-08-13 Andrew Burgess <aburgess@broadcom.com>
3161 * common/format.c (parse_format_string): Don't allow '#' flag for
3162 pointer arguments in format string.
3164 2013-08-13 Pierre Muller <muller@sourceware.org>
3166 * utils.c (init_page_info): Only call tgetnum function
3167 if rl_get_screen_size did not return useful values.
3169 2013-08-12 Ali Anwar <ali_anwar@codesourcery.com>
3171 PR breakpoints/15117
3172 * linespec.c (linespec_parse_basic): Check for convenience
3173 variable or history value while parsing.
3175 2013-08-12 Sergio Durigan Junior <sergiodj@redhat.com>
3177 Revert implementation of gdbarch_gdb_signal_{to,from}_target for
3179 * avr-tdep.c: Remove include of "linux-tdep.h". Remove enum with
3180 different signals between the generic Linux kernel implementation
3182 (avr_linux_gdb_signal_from_target): Delete.
3183 (avr_linux_gdb_signal_to_target): Delete.
3184 (avr_gdbarch_init): Don't set gdbarch_gdb_signal_{to,from}_target.
3186 2013-08-09 Doug Evans <dje@google.com>
3188 * dwarf2read.c (create_addrmap_from_index): Ignore bad address table
3191 2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com>
3193 * linux-tdep.c: Define enum with generic signal numbers.
3194 (linux_gdb_signal_from_target): New function.
3195 (linux_gdb_signal_to_target): Likewise.
3196 (linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
3197 methods to the functions above.
3198 * linux-tdep.h (linux_gdb_signal_from_target): New prototype.
3199 (linux_gdb_signal_to_target): Likewise.
3200 * alpha-linux-tdep.c: Define new enum with signals different
3201 from generic Linux kernel.
3202 (alpha_linux_gdb_signal_from_target): New function.
3203 (alpha_linux_gdb_signal_to_target): Likewise.
3204 (alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
3205 with the functions mentioned above.
3206 * avr-tdep.c: Define enum with differences between Linux kernel
3208 (avr_linux_gdb_signal_from_target): New function.
3209 (avr_linux_gdb_signal_to_target): Likewise.
3210 (avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to
3211 the functions mentioned above.
3212 * sparc-linux-tdep.c: Define enum with differences between SPARC
3213 and generic Linux kernel signal numbers.
3214 (sparc32_linux_gdb_signal_from_target): New function.
3215 (sparc32_linux_gdb_signal_to_target): Likewise.
3216 (sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
3217 to the functions defined above.
3218 * xtensa-linux-tdep.c: Define enum with differences between
3219 Xtensa and Linux kernel generic signals.
3220 (xtensa_linux_gdb_signal_from_target): New function.
3221 (xtensa_linux_gdb_signal_to_target): Likewise.
3222 (xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target
3223 to the functions defined above.
3224 * mips-linux-tdep.c: Define enum with differences between
3225 signals in MIPS and Linux kernel generic ones.
3226 (mips_gdb_signal_to_target): New function.
3227 (mips_gdb_signal_from_target): Redefine to use new enum, handle
3228 only different signals from the Linux kernel generic.
3229 (mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
3230 the functions defined above.
3231 * mips-linux-tdep.h (enum mips_signals): Remove.
3233 2013-08-09 Pedro Alves <palves@redhat.com>
3235 * avr-tdep.c (XMALLOC): Delete macro.
3236 * cli/cli-dump.c (XMALLOC): Delete macro.
3238 2013-08-09 Pedro Alves <palves@redhat.com>
3240 * cli/cli-dump.c: Don't include cli/cli-dump.h.
3241 (scan_expression_with_cleanup, scan_filename_with_cleanup)
3242 (fopen_with_cleanup, add_dump_command): Make static.
3243 * cli/cli-dump.h: Delete file.
3244 * Makefile.in (HFILES_NO_SRCDIR): Remove reference to
3247 2013-08-09 Pedro Alves <palves@redhat.com>
3249 * tracepoint.c (tfile_start): Show tilde-expanded filename in
3252 2013-08-09 Pedro Alves <palves@redhat.com>
3254 * breakpoint.c (save_breakpoints): Show tilde-expanded filename in
3257 2013-08-09 Pedro Alves <palves@redhat.com>
3259 * gcore.c (create_gcore_bfd): Don't use tilde_expand here.
3260 (gcore_command): Use tilde_expand here, and when showing the
3261 filename to the user, show the expanded version.
3263 2013-08-09 Yao Qi <yao@codesourcery.com>
3265 * stack.c (read_frame_arg): Set 'entryval_error' to NULL if
3268 2013-08-08 Azat Khuzhin <a3at.mail@gmail.com> (tiny change)
3270 * gcore.c (create_gcore_bfd): Use tilde_expand.
3272 2013-08-08 Yao Qi <yao@codesourcery.com>
3274 * frame.h (read_frame_local): Declare.
3275 * mi/mi-cmd-stack.c (list_args_or_locals): Call
3277 * stack.c (read_frame_local): New.
3279 2013-08-08 Yao Qi <yao@codesourcery.com>
3281 * mi/mi-cmd-stack.c: Update comments to function
3282 list_args_or_locals.
3284 2013-08-07 Tom Tromey <tromey@redhat.com>
3287 * dwarf2read.c (struct process_psymtab_comp_unit_data): New.
3288 (process_psymtab_comp_unit_reader): Use it.
3289 (process_psymtab_comp_unit): Update. Add "pretend_language"
3291 (dwarf2_build_psymtabs_hard): Update.
3292 (scan_partial_symbols): Pass CU's language to
3293 process_psymtab_comp_unit.
3295 2013-08-07 Tom Tromey <tromey@redhat.com>
3297 * dwarf2read.c (dw2_get_primary_filename_reader): Remove.
3298 (dwarf2_gdb_index_functions): Update.
3299 * psymtab.c (find_symbol_file_from_partial): Remove.
3300 (psym_functions): Update.
3301 * symfile.h (struct quick_symbol_functions) <find_symbol_file>:
3304 2013-08-07 Tom Tromey <tromey@redhat.com>
3306 * symfile.c (set_initial_language): Look up "main" symbol
3307 and use its language.
3308 * symtab.c (find_main_filename): Remove.
3309 * symtab.h (find_main_filename): Remove.
3311 2013-08-07 Tom Tromey <tromey@redhat.com>
3313 * dwarf2read.c (recursively_compute_inclusions): Add
3314 "immediate_parent" argument. Set symtab's "user" field
3316 (compute_symtab_includes): Update.
3318 2013-08-07 Tom Tromey <tromey@redhat.com>
3320 * linespec.c (convert_linespec_to_sals): Use maybe_add_address
3321 when adding label symbols.
3323 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
3324 Ulrich Weigand <uweigand@de.ibm.com>
3326 * configure.tgt (powerpc64-*-aix*): Match powerpc64 running aix.
3327 * configure.host (powerpc64-*-aix*): Likewise.
3329 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
3330 Ulrich Weigand <uweigand@de.ibm.com>
3332 * gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64
3334 * rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb.
3335 (rs6000_ptrace32): Call ptrace64 instead of ptrace if present.
3336 (rs6000_ptrace64): Call ptace64 instead of ptracex if present.
3337 * configure.ac: Check for ptrace64.
3338 * configure, config.in: Regenerate.
3340 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
3341 Ulrich Weigand <uweigand@de.ibm.com>
3343 * aixthread.c: Call ptrace64 instead of ptracex if defined.
3344 Call ptrace64 instead of ptrace if defined.
3345 Add macro addr_ptr to take care of ptrace address argument.
3346 (pdc_read_regs): Likewise.
3347 (pdc_write_regs): Likewise.
3348 (aix_thread_resume): Likewise.
3349 (fetch_regs_kernel_thread): Likewise.
3350 (store_regs_kernel_thread): Likewise.
3352 2013-08-07 Anton Blanchard <anton@samba.org>
3354 * MAINTAINERS: Add myself to Write After Approval.
3356 2013-08-05 Tom Tromey <tromey@redhat.com>
3358 * aix-thread.c (_initialize_aix_thread): Use
3359 complete_target_initialization.
3360 * bsd-uthread.c (_initialize_bsd_uthread): Use
3361 complete_target_initialization.
3362 * dec-thread.c (_initialize_dec_thread): Use
3363 complete_target_initialization.
3364 * ravenscar-thread.c (_initialize_ravenscar): Use
3365 complete_target_initialization.
3366 * sol-thread.c (_initialize_sol_thread): Use
3367 complete_target_initialization.
3368 * spu-multiarch.c (_initialize_spu_multiarch): Use
3369 complete_target_initialization.
3371 2013-08-05 Tom Tromey <tromey@redhat.com>
3373 * ada-exp.y (write_var_or_type): Use bound_minimal_symbol.
3374 * ada-lang.c (ada_lookup_simple_minsym): Return
3375 bound_minimal_symbol.
3376 * ada-lang.h (ada_lookup_simple_minsym): Update.
3377 * c-exp.y (variable): Use lookup_bound_minimal_symbol.
3378 * f-exp.y (variable): Use lookup_bound_minimal_symbol.
3379 * go-exp.y (variable): Use lookup_bound_minimal_symbol.
3380 * jv-exp.y (push_expression_name): Use lookup_bound_minimal_symbol.
3381 * m2-exp.y (variable): Use lookup_bound_minimal_symbol.
3382 * minsyms.c (msymbol_objfile): Remove.
3383 (lookup_minimal_symbol_internal): New function, from
3384 lookup_minimal_symbol.
3385 (lookup_minimal_symbol): Rewrite using
3386 lookup_minimal_symbol_internal.
3387 (lookup_bound_minimal_symbol): New function.
3388 * minsyms.h (msymbol_objfile): Remove.
3389 (lookup_bound_minimal_symbol): Declare.
3390 * p-exp.y (variable): Use lookup_bound_minimal_symbol.
3391 * parse.c (write_exp_msymbol): Change parameter to a
3392 bound_minimal_symbol.
3393 (write_dollar_variable): Use lookup_bound_minimal_symbol.
3394 * parser-defs.h (write_exp_msymbol): Update.
3395 * printcmd.c (address_info): Use lookup_bound_minimal_symbol.
3396 * symfile.c (simple_read_overlay_table): Use
3397 lookup_bound_minimal_symbol.
3398 * symtab.c (skip_prologue_sal): Don't use msymbol_objfile.
3399 (search_symbols): Likewise.
3400 (print_msymbol_info): Take a bound_minimal_symbol argument.
3401 (symtab_symbol_info, rbreak_command): Update.
3402 * symtab.h (struct symbol_search) <msymbol>: Change type
3403 to bound_minimal_symbol.
3404 * valops.c (find_function_in_inferior): Use
3405 lookup_bound_minimal_symbol.
3406 * value.c (value_fn_field): Use lookup_bound_minimal_symbol.
3408 2013-08-05 Jan Kratochvil <jan.kratochvil@redhat.com>
3411 * remote.c (cleanup_sigint_signal_handler): Rename the declaration
3413 (async_cleanup_sigint_signal_handler): ... this.
3414 (initialize_sigint_signal_handler): Remove declaration.
3415 (handle_remote_sigint): Rename the declaration to ...
3416 (async_handle_remote_sigint): ... this.
3417 (handle_remote_sigint_twice): Rename the declaration to ...
3418 (async_handle_remote_sigint_twice): ... this.
3419 (async_remote_interrupt, async_remote_interrupt_twice)
3420 (remote_interrupt): Remove the declarations.
3421 (remote_interrupt_twice): Rename the declaration ...
3422 (sync_remote_interrupt_twice): ... this.
3423 (sigint_remote_twice_token): Rename the variable to ...
3424 (async_sigint_remote_twice_token): ... this.
3425 (sigint_remote_token): Rename the variable to ...
3426 (async_sigint_remote_token): ... this.
3427 (initialize_sigint_signal_handler): Rename the function to ...
3428 (async_initialize_sigint_signal_handler): ... this. Update the name
3430 (handle_remote_sigint): Rename the function to ...
3431 (async_handle_remote_sigint): ... this. Update the names inside.
3432 (handle_remote_sigint_twice): Rename the function to ...
3433 (async_handle_remote_sigint_twice): ... this. Update the names inside.
3434 (cleanup_sigint_signal_handler): Rename the function to ...
3435 (async_cleanup_sigint_signal_handler): ... this.
3436 (remote_interrupt): Rename the function to ...
3437 (sync_remote_interrupt): this. Update the names inside.
3438 (remote_interrupt_twice): Rename the function to ...
3439 (sync_remote_interrupt_twice): this. Update the names inside.
3440 (remote_terminal_inferior, remote_terminal_ours, remote_wait_as)
3441 (_initialize_remote): Update the names inside.
3443 2013-08-02 Tom Tromey <tromey@redhat.com>
3446 * breakpoint.c (update_watchpoint, watchpoint_check)
3447 (watch_command_1): Update.
3448 * eval.c (fetch_subexp_value): Add "preserve_errors"
3450 * ppc-linux-nat.c (check_condition): Update.
3451 * value.h (fetch_subexp_value): Update.
3453 2013-08-02 Andrew Burgess <aburgess@broadcom.com>
3455 * mi/mi-interp.c (mi_interpreter_resume): Remove call to
3458 2013-08-01 Doug Evans <dje@google.com>
3461 * dwarf2read.c (struct dwarf2_per_cu_data): New member tu_read.
3462 (fill_in_sig_entry_from_dwo_entry): Reorganize asserts.
3463 Add assert of sig_entry->dwo_unit == NULL.
3464 (lookup_dwo_signatured_type): Don't assign TU to a DWO if the TU
3465 had already been read.
3466 (read_signatured_type): Set per_cu.tu_read.
3469 * valops.c (value_struct_elt): Add missing call to check_typedef.
3470 (value_find_oload_method_list): Ditto.
3472 * symtab.c (do_free_search_symbols_cleanup): Change arg to,
3473 effectively, struct symbol_search **.
3474 (make_cleanup_free_search_symbols): Change arg to struct
3475 symbol_search **. All callers updated.
3476 (compare_search_syms): Compare symtab file name and block as well.
3477 (search_symbols_equal): New function.
3478 (sort_search_symbols_remove_dups): Renamed from sort_search_symbols.
3479 New args new_head, new_tail. Result is now void. Remove dups after
3480 sorting the symbols.
3481 (search_symbols): Sort all found symbols once, after all have been
3482 found, and remove duplicates. Simplify cleanup tracking of result.
3483 * symtab.h (make_cleanup_free_search_symbols): Update prototype.
3485 Further workarounds for binutils/15021.
3486 * dwarf2read.c (recursively_compute_inclusions): Change type of result
3487 parameter to VEC (symtab_ptr) **. New parameter all_type_symtabs.
3488 Watch for duplicate symtabs coming from type units.
3489 (compute_symtab_includes): Update call to
3490 recursively_compute_inclusions. Build vector of included symtabs
3492 * symtab.h (symtab_ptr): New typedef.
3493 (DEF_VEC_P (symtab_ptr)): New VEC type.
3494 * linespec.c (symtab_p): Delete. All uses updated to use symtab_ptr
3497 2013-08-01 Andrew Burgess <aburgess@broadcom.com>
3499 * cli/cli-script.c (script_from_file): Remove use of
3501 * main.c (captured_main): Remove use of error_pre_print and
3503 * utils.c (error_pre_print, quit_pre_print): Remove.
3504 * utils.h (error_pre_print, quit_pre_print): Likewise.
3506 2013-08-01 Yao Qi <yao@codesourcery.com>
3508 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Parse argv
3510 (mi_cmd_stack_list_variables): Likewise.
3512 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
3514 * exceptions.c (deprecated_throw_reason): Remove.
3515 * exceptions.h (deprecated_throw_reason): Remove.
3517 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
3519 * remote-mips.c (mips_error): Replace use of
3520 deprecated_throw_reason with throw_verror. Use the error message
3521 passed to mips_error as the error message for throw_verror.
3523 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
3525 * monitor.c (monitor_interrupt_query): Replace use of
3526 deprecated_throw_reason with quit.
3527 * nto-procfs.c (interrupt_query): Likewise.
3528 * remote-fileio.c (remote_fileio_sig_exit): Likewise.
3529 * remote-mips.c (mips_kill): Likewise.
3530 * remote.c (interrupt_query): Likewise.
3532 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
3534 * utils.c (internal_verror): Replace use of deprecated_throw_reason
3537 2013-07-31 Pedro Alves <pedro@codesourcery.com>
3538 Yao Qi <yao@codesourcery.com>
3540 * tracepoint.c (trace_dump_command): Select the current frame.
3542 2013-07-30 Doug Evans <dje@google.com>
3544 * dwarf2read.c (process_queue): Add type signature to debug output.
3546 2013-07-30 Andrew Burgess <aburgess@broadcom.com>
3548 * value.c (value_fetch_lazy): Mark optimized out values as such
3549 rather than raising an error.
3551 2013-07-30 Andrew Burgess <aburgess@broadcom.com>
3553 * value.c (value_fetch_lazy): Ensure parent value is not lazy
3554 before checking which bits of the parent, not the child, value are
3557 2013-07-30 Muhammad Bilal <mbilal@codesorcery.com>
3560 * top.c: Include "filenames.h".
3561 (set_history_filename): New function.
3562 (init_main): Install it as set hook of the "set history filename"
3565 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
3567 * dwarf2read.c (dwarf2_get_ref_die_offset): Constify struct
3568 attribute parameter.
3569 (dwarf2_const_value_data): Constify struct attribute parameter.
3570 (dwarf2_const_value): Constify struct attribute parameter.
3571 (dwarf2_const_value_attr): Constify struct attribute parameter.
3572 (lookup_die_type): Constify struct attribute parameter.
3573 (dwarf2_get_attr_constant_value): Constify struct attribute parameter.
3574 (follow_die_ref_or_sig): Constify struct attribute parameter.
3575 (follow_die_ref): Constify struct attribute parameter.
3576 (follow_die_sig): Constify struct attribute parameter.
3577 (get_DW_AT_signature_type): Constify struct attribute parameter.
3578 (get_type_unit_group): Constify struct attribute parameter.
3579 (fill_in_loclist_baton): Constify struct attribute parameter.
3580 (dwarf2_symbol_mark_computed): Constify struct attribute parameter.
3581 (type_unit_group): Constify struct attribute parameter.
3583 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
3585 * dwarf2read.c (attr_form_is_block): Make argument const.
3586 (attr_form_is_section_offset): Make argument const.
3587 (attr_form_is_constant): Make argument const.
3588 (attr_form_is_ref): Make argument const.
3590 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
3592 * dwarf2read.c (attr_is_ref): Rename to attr_form_is_ref.
3594 (attr_form_is_ref): Moved below attr_form_is_constant.
3596 2013-07-29 Doug Evans <dje@google.com>
3598 * main.c (captured_command_loop): Tweak comment.
3600 * target.c (target_async_permitted_1): Fix comment.
3602 * symtab.c (iterate_over_some_symtabs): Add comment.
3604 * symtab.c (iterate_over_some_symtabs): Fix indentation.
3606 2013-07-27 Yao Qi <yao@codesourcery.com>
3608 * NEWS: Mention that GDBserver now supports hardware
3609 watchpoints on the MIPS GNU/Linux target.
3611 2013-07-27 Yao Qi <yao@codesourcery.com>
3613 * Makefile.in (HFILES_NO_SRCDIR): Add
3614 common/mips-linux-watch.h.
3615 (mips-linux-watch.o): New rule.
3616 * common/mips-linux-watch.c: New.
3617 * common/mips-linux-watch.h: New.
3618 * config/mips/linux.mh (NATDEPFILES): Add mips-linux-watch.o
3619 * mips-linux-nat.c: Include mips-linux-watch.h.
3620 (W_BIT, R_BIT, I_BIT, W_MASK, R_MASK, I_MASK, IRW_MASK): Move
3621 to common/mips-linux-watch.h.
3622 (MAX_DEBUG_REGISTER): Likewise.
3623 (enum pt_watch_style): Likewise.
3624 (struct mips32_watch_regs): Likewise.
3625 (struct mips64_watch_regs): Likewise.
3626 (struct pt_watch_regs): Likewise.
3627 (struct mips_watchpoint): Likewise.
3628 (mips_linux_watch_get_irw_mask): Move to
3629 common/mips-linux-watch.c.
3630 (get_reg_mask, mips_linux_watch_get_num_valid): Likewise.
3631 (mips_linux_watch_get_watchlo): Likewise.
3632 (mips_linux_watch_set_watchlo): Likewise.
3633 (mips_linux_watch_get_watchhi): Likewise.
3634 (mips_linux_watch_set_watchhi): Likewise.
3635 (mips_linux_read_watch_registers): Likewise.
3636 (mips_linux_watch_type_to_irw): Likewise.
3637 (mips_linux_stopped_data_address, fill_mask): Likewise.
3638 (mips_linux_watch_try_one_watch): Likewise.
3639 (mips_linux_watch_populate_regs): Likewise.
3641 2013-07-27 Yao Qi <yao@codesourcery.com>
3643 * mips-linux-nat.c (get_irw_mask): Rename to ...
3644 (mips_linux_watch_get_irw_mask): ... this. Rename parameter
3645 'set' to 'n'. Update function comment. All callers changed.
3646 (get_reg_mask): Rename parameter 'set' to 'n'. Update
3647 function comment. All callers changed.
3648 (get_num_valid): Rename to ...
3649 (mips_linux_watch_get_num_valid): ... this. Rename parameter
3650 'set' to 'n'. Update function comment. All callers changed.
3651 (get_watchlo): Rename to ...
3652 (mips_linux_watch_get_watchlo): ... this. Rename parameter
3653 'set' to 'n'. Update function comment. All callers changed.
3654 (set_watchlo): Rename to ...
3655 (mips_linux_watch_set_watchlo): ... this. Rename parameter
3656 'set' to 'n'. Update function comment. All callers changed.
3657 (get_watchhi): Rename to ...
3658 (mips_linux_watch_get_watchhi): ... this. Update function
3659 comment. All callers changed.
3660 (set_watchhi): Rename to ...
3661 (mips_linux_watch_set_watchhi): ... this. Update function
3662 comment. All callers changed.
3663 (mips_linux_read_watch_registers): Update function comment.
3664 Add new parameters 'lwpid', 'watch_readback', and
3665 'watch_readback_valid'. Update.
3666 (type_to_irw): Rename to ...
3667 (mips_linux_watch_type_to_irw): ... this. Update function
3668 comment. All callers changed.
3669 (fill_mask): Update function comment.
3670 (try_one_watch): Rename to ...
3671 (mips_linux_watch_try_one_watch): ... this. Change the type
3672 of parameter 'irw' from 'unsigned' to 'uint32_t'.
3673 (populate_regs_from_watches): Rename to ...
3674 (mips_linux_watch_populate_regs): ... this. Add parameter
3675 'current_watches'. All callers changed.
3677 2013-07-27 Yao Qi <yao@codesourcery.com>
3679 * mips-linux-nat.c (MAX_DEBUG_REGISTER): Move it earlier in
3681 (PTRACE_SET_WATCH_REGS, enum pt_watch_style): Remove.
3682 (struct mips32_watch_regs, struct mips64_watch_regs): Remove.
3683 (struct pt_watch_regs): Likewise.
3684 [!PTRACE_GET_WATCH_REGS] (PTRACE_SET_WATCH_REGS): New macro.
3685 [!PTRACE_GET_WATCH_REGS] (enum pt_watch_style): New.
3686 [!PTRACE_GET_WATCH_REGS] (struct mips32_watch_regs): New.
3687 [!PTRACE_GET_WATCH_REGS] (struct mips64_watch_regs): New.
3688 [!PTRACE_GET_WATCH_REGS] (struct pt_watch_regs): New.
3690 2013-07-27 Yao Qi <yao@codesourcery.com>
3692 * breakpoint.h: Include break-common.h.
3693 (enum target_hw_bp_type): Move to ...
3694 * common/break-common.h: ... here. New.
3696 2013-07-26 Cyril Nikolaev <cyril@nichtverstehen.de>
3698 * inflow.c (terminal_init_inferior_with_pgrp): Save inferior
3699 process group regardless of having tty on stdin.
3701 2013-07-25 Doug Evans <dje@google.com>
3703 * linux-fork.h (detach_fork): Delete.
3705 2013-07-25 Tom Tromey <tromey@redhat.com>
3707 PR remote/15256, PR remote/15266:
3708 * bfd-target.c (target_bfd_reopen): Initialize to_magic.
3709 * monitor.c (monitor_detach): Use unpush_target.
3710 * remote-m32r-sdi.c (m32r_detach): Use unpush_target.
3711 * remote-mips.c (mips_detach): Use unpush_target. Don't
3713 * remote-sim.c (gdbsim_detach): Use unpush_target.
3714 * target.c (pop_target): Remove.
3715 (pop_all_targets_above): Don't call target_close.
3716 (target_close): Assert that the target is unpushed.
3717 * target.h (pop_target): Don't declare.
3718 * tracepoint.c (tfile_open): Use unpush_target.
3720 2013-07-25 Tom Tromey <tromey@redhat.com>
3722 * linux-thread-db.c (init_thread_db_ops): Call
3723 complete_target_initialization.
3724 (_initialize_thread_db): Don't call add_target.
3725 * target.c (complete_target_initialization): New function.
3726 (add_target_with_completer): Call it.
3727 * target.h (complete_target_initialization): Declare.
3729 2013-07-25 Mark Kettenis <kettenis@gnu.org>
3731 * hppa-tdep.h (enum hppa_regnum): Add members for all space registers.
3732 * hppaobsd-tdep.c (HPPAOBSD_SIZEOF_GREGS): Add comment.
3733 (HPPANBSD_SIZEOF_GREGS): New define.
3734 (hppaobsd_supply_gregset): Handle additional registers.
3735 * hppabsd-nat.c (hppabsd_gregset_supplies_p): Adjust to indicate
3736 we provide more registers now.
3737 (hppabsd_supply_gregset): Supply additional registers.
3738 (hppabsd_collect_gregset): Collect additional registers.
3740 2013-07-25 Mark Kettenis <kettenis@gnu.org>
3742 * hppabsd-tdep.c: Include "dwarf2-frame.h".
3743 (hppabsd_dwarf2_frame_init_reg): New function.
3744 (hppabsd_init_abi): Hook in the DWARF CFI frame unwinder.
3746 2013-07-25 Andrew Burgess <aburgess@broadcom.com>
3748 * mi/mi-main.c (output_register): Make MI 'r' format use standard
3749 'z' format code. Remove error for optimized out values, standard
3750 code will handle these fine.
3752 2013-07-25 Andrew Burgess <aburgess@broadcom.com>
3754 * NEWS: Mention new 'z' formatter.
3755 * printcmd.c (print_scalar_formatted): Add new 'z' formatter.
3756 (_initialize_printcmd): Mention 'z' formatter in help text of the
3759 2013-07-24 Maciej W. Rozycki <macro@codesourcery.com>
3761 * mips-tdep.c (micromips_deal_with_atomic_sequence): Correct
3764 2013-07-24 Sergio Durigan Junior <sergiodj@redhat.com>
3766 * breakpoint.c (create_longjmp_master_breakpoint): Check if probe
3767 interface can evaluate arguments. Fallback to the old mode if it
3769 (create_exception_master_breakpoint): Likewise.
3770 * elfread.c (elf_can_evaluate_probe_arguments): New function.
3771 (struct sym_probe_fns elf_probe_fns): Export function above to the
3773 * probe.c (can_evaluate_probe_arguments): New function.
3774 * probe.h (struct probe_ops) <can_evaluate_probe_arguments>: New
3776 (can_evaluate_probe_arguments): New function prototype.
3777 * solib-svr4.c (svr4_create_solib_event_breakpoints): Check if
3778 probe interface can evaluate arguments. Fallback to the old mode
3780 * stap-probe.c (stap_get_probe_argument_count): Check if probe
3781 interface can evaluate arguments. Warning the user if it cannot.
3782 (stap_can_evaluate_probe_arguments): New function.
3783 (struct probe_ops stap_probe_ops): Export function above to the
3785 * symfile.h (struct sym_probe_fns) <can_evaluate_probe_arguments>:
3786 New function pointer.
3788 2013-07-24 Luis Machado <lgustavo@codesourcery.com>
3790 * Makefile.in (SFILES): Add common/target-common.c.
3791 Add common/target-common.h to headers.
3792 (COMMON_OBS): Add target-common.o.
3793 (target-common.o): New target.
3794 * linux-nat.h (resume_kind): Move to common/target-common.h.
3795 * target.c (target_waitstatus_to_string): Move to
3796 common/target-common.c.
3797 * target.h: Include target-common.h.
3798 (target_waitkind): Move to common/target-common.h.
3799 (target_waitstatus): Likewise.
3800 (TARGET_WNOHANG): Likewise.
3801 * common/target-common.c: New file.
3802 * common/target-common.h: New file.
3804 2013-07-24 Doug Evans <dje@google.com>
3806 * dwarf2read.c (lookup_dwo_cutu): Change missing DWO complaint to
3809 2013-07-23 Yao Qi <yao@codesourcery.com>
3811 * i386-tdep.c (i386_in_stack_tramp_p): Remove unused
3812 parameter 'gdbarch'.
3813 (i386_stack_tramp_frame_sniffer): Caller update.
3814 * i386-linux-tdep.c (i386_linux_core_read_xcr0): Remove
3815 parameter 'gdbarch' and 'target'.
3816 (i386_linux_core_read_description): Caller update.
3817 * amd64-linux-tdep.c (amd64_linux_core_read_description):
3819 * i386-linux-tdep.h (i386_linux_core_read_xcr0): Update
3822 2013-07-23 Tom Tromey <tromey@redhat.com>
3824 * dwarf2read.c (init_cutu_and_read_dies): Revert patch from
3827 2013-07-22 Doug Evans <dje@google.com>
3829 * exec.h (remove_target_sections): Delete arg abfd.
3830 * exec.c (exec_close): Update call to remove_target_sections.
3831 (remove_target_sections): Delete arg abfd.
3832 * solib.c (update_solib_list): Ditto.
3833 (reload_shared_libraries_1): Ditto.
3834 (clear_solib): Ditto, and unconditionally call remove_target_sections.
3835 * target.h (struct target_section): Rename key to owner.
3838 2013-07-22 Tom Tromey <tromey@redhat.com>
3840 * solib-som.c (som_open_symbol_file_object): Call do_cleanups.
3842 2013-07-22 Tom Tromey <tromey@redhat.com>
3844 * dwarf2read.c (init_cutu_and_read_dies): Remove 'free_cu_cleanup'.
3845 Simplify cleanup handling.
3847 2013-07-22 Tom Tromey <tromey@redhat.com>
3849 * dwarf2read.c (dwarf_decode_line_header): Call do_cleanups
3850 on all return paths.
3852 2013-07-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3854 * ppc-linux-nat.c (PPC_DEBUG_FEATURE_DATA_BP_DAWR): New define.
3855 (ppc_linux_region_ok_for_hw_watchpoint): Add checking to use the new
3856 DAWR interface for longer ranges hardware watchpoint (up to 512 bytes).
3858 2013-07-22 Phil Muldoon <pmuldoon@redhat.com>
3860 * top.c (print_gdb_version): Add help, apropos description and
3861 url to online documentation.
3863 2013-07-19 Hui Zhu <hui@codesourcery.com>
3866 * mi/mi-cmd-break.c (mi_argv_to_format): Handle double quotes.
3868 2013-07-19 Yao Qi <yao@codesourcery.com>
3870 * target.c (update_current_target): Change the default action
3871 of 'to_traceframe_info' from tcomplain to return_zero.
3872 * target.h (struct target_ops) <to_traceframe_info>: Add more
3874 * valops.c (read_value_memory): Call
3875 traceframe_available_memory unconditionally.
3877 2013-07-18 Yao Qi <yao@codesourcery.com>
3879 * coffread.c (coff_symfile_read): Iterate over minimal symbols,
3880 if the name is prefixed by "__imp_" or "_imp_", look for minimal
3881 symbol without prefix. If found, set its type to
3882 'mst_solib_trampoline'.
3884 2013-07-17 Doug Evans <dje@google.com>
3886 * NEWS: Mention "set print raw frame-arguments".
3887 * gdbcmd.h (setprintrawlist, showprintrawlist): Declare.
3888 * stack.c (print_raw_frame_arguments): New static global.
3889 (print_frame_arg): Set opts.raw from print_raw_frame_arguments.
3890 (_initialize_stack): New command "set/show print raw frame-arguments".
3891 * valprint.c (setprintrawlist, showprintrawlist): New globals.
3892 (set_print_raw, show_print_raw): New functions.
3893 (_initialize_valprint): New prefix command "set/show print raw".
3894 * valprint.h (value_print_options): Improve comments.
3896 * cli/cli-cmds.c (init_cmd_lists): Delete unnecessary initialization
3897 of all *list variables.
3899 * gdbcmd.h (togglelist): Delete.
3900 * cli/cli-cmds.c (togglelist): Delete.
3901 (init_cmd_lists): Update.
3902 * cli/cli-cmds.h (togglelist): Delete.
3904 2013-07-17 Tom Tromey <tromey@redhat.com>
3906 * dwarf2read.c (dwarf2_per_objfile_free): Clear
3909 2013-07-16 Doug Evans <dje@google.com>
3911 * nto-tdep.c (nto_relocate_section_addresses): Update,
3912 target_section.bfd deleted.
3913 * ppc64-tdep.c (ppc64_convert_from_func_ptr_addr): Ditto.
3914 * s390-tdep.c (s390_load): Ditto.
3915 * solib-aix.c (solib_aix_relocate_section_addresses): Ditto.
3917 2013-07-16 Andrew Burgess <aburgess@broadcom.com>
3919 * common/format.c (parse_format_string): Add checks for NULL
3920 character before calling strchr.
3922 2013-07-16 Doug Evans <dje@google.com>
3924 * solist.h (target_so_ops.find_and_open_solib): Clarify usage of
3925 temp_pathname argument.
3926 * nto-tdep.c (nto_find_and_open_solib): Fix setting of temp_pathname
3927 when opening the file fails.
3929 * target.h (struct target_section): Delete member bfd.
3930 All users updated to use the_bfd_section->owner instead.
3931 * exec.c (add_to_section_table): Assert bfd is expected value.
3932 Remove initialization of target_section.bfd.
3933 (remove_target_sections): Update.
3934 (section_table_available_memory): Update.
3935 (section_table_xfer_memory_partial): Update.
3936 (print_section_info): Update.
3937 (exec_set_section_address): Update.
3938 * record-full.c (record_full_core_xfer_partial): Update.
3939 * solib-svr4.c (svr4_relocate_section_addresses): Update.
3940 * solib-target.c (solib_target_relocate_section_addresses): Update.
3941 * symfile.c (build_section_addr_info_from_section_table): Update.
3942 * target.c (memory_xfer_live_readonly_partial): Update.
3943 (memory_xfer_partial_1): Update.
3945 2013-07-15 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3947 * ppc-linux-nat.c: Since the new PowerPC specific ptrace interface is
3948 now available for embedded (BookE) and server (BookS) processors,
3949 correct mentions of 'booke' and adjust comments accordingly in order to
3950 avoid confusion. Rename struct 'booke_debug_info' to 'hwdebug_info'.
3951 (have_ptrace_booke_interface): Rename function and variable
3952 'have_ptrace_booke_interface' to 'have_ptrace_hwdebug_interface'.
3953 Rename struct 'booke_debug_info' to 'hwdebug_info'. Update all uses.
3954 (booke_cmp_hw_point): Rename function 'booke_cmp_hw_point' to
3955 'hwdebug_point_cmp'. Update all uses.
3956 (booke_find_thread_points_by_tid): Rename function
3957 'booke_find_thread_points_by_tid' to
3958 'hwdebug_find_thread_points_by_tid'. Update all uses.
3959 (booke_insert_point): Rename function 'booke_insert_point' to
3960 'hwdebug_insert_point'. Update all uses.
3961 (booke_remove_point): Rename function 'booke_remove_point' to
3962 'hwdebug_remove_point'. Update all uses.
3964 2013-07-15 Maciej W. Rozycki <macro@codesourcery.com>
3966 * mips-tdep.c (mips_gdbarch_init): Replace hardcoded magic
3967 numbers with enum values.
3969 2013-07-15 Ali Anwar <ali_anwar@codesourcery.com>
3972 * thread.c (thread_apply_all_command): Check for valid threads
3974 (thread_array_cleanup): New struct.
3975 (set_thread_refcount): New function.
3977 2013-07-11 Andrew Burgess <aburgess@broadcom.com>
3979 * infcmd.c (default_print_one_register_info): Reuse function
3982 2013-07-10 Tom Tromey <tromey@redhat.com>
3984 * Makefile.in (GDB_WARN_CFLAGS_NO_DEFS, ADA_EXP_C): New macros.
3985 (ada-exp.o): New target.
3987 2013-07-10 Sergio Durigan Junior <sergiodj@redhat.com>
3989 * mt-tdep.c (mt_registers_info): Call
3990 get_no_prettyformat_print_options instead of
3991 get_raw_print_options (regression by last patch from Doug
3994 2013-07-09 Pedro Alves <palves@redhat.com>
3996 Checked in by Joel Brobecker <brobecker@adacore.com>.
3997 * ada-lang.c (coerce_unspec_val_to_type): Use
3998 value_optimized_out_const.
3999 * value.c (value_optimized_out_const): New function.
4000 * value.h (value_optimized_out_const): New declaration.
4002 2013-07-09 Doug Evans <dje@google.com>
4004 * defs.h (enum val_prettyformat): Renamed from val_prettyprint.
4005 Enum values rename as well. All uses updated.
4006 * valprint.h (value_print_options): Rename member pretty to
4007 pretty format. Rename member prettyprint_arrays to
4008 prettyformat_arrays. Rename member prettyprint_structs to
4009 prettyformat_structs. All uses updated.
4010 (get_no_prettyformat_print_options): Renamed from
4011 get_raw_print_options.
4012 * valprint.c (get_no_prettyformat_print_options): Renamed from
4013 get_raw_print_options. All callers updated.
4014 (show_prettyformat_structs): Renamed from show_prettyprint_structs.
4015 All callers updated.
4016 (show_prettyformat_arrays): Renamed from show_prettyprint_arrays.
4017 All callers updated.
4018 (_initialize_valprint): Improve help text for "set print pretty" and
4021 2013-07-09 Andrew Burgess <aburgess@broadcom.com>
4023 * value.c (value_bits_valid): Revert previous change, and change
4024 by Pedro on 2013-07-04, due to regressions in
4025 gdb.dwarf2/implptr.exp and gdb.dwarf2/pieces.exp.
4027 2013-07-08 Andrew Burgess <aburgess@broadcom.com>
4028 Pedro Alves <palves@redhat.com>
4030 * value.c (value_bits_valid): If the value is not lval_computed
4031 or has no check validity handler then the answer is the
4032 optimized_out flag, otherwise defer to the handler.
4034 2013-07-06 Eli Zaretskii <eliz@gnu.org>
4036 * top.c (print_gdb_configuration): Explain in output of
4037 --configuration what does "relocatable" mean.
4039 * main.c (print_gdb_help): Regroup options in the --help text.
4040 See http://sourceware.org/ml/gdb-patches/2013-04/msg00362.html for
4041 the relevant discussions.
4043 2013-07-06 Yao Qi <yao@codesourcery.com>
4045 * breakpoint.h (struct breakpoint_ops) <create_breakpoints_sal>:
4046 Remove parameter 'lsal'.
4047 * breakpoint.c (create_breakpoint): Move local variable 'lsal'
4048 to inner block. Caller update.
4049 (base_breakpoint_create_breakpoints_sal): Update.
4050 (bkpt_create_breakpoints_sal): Likewise.
4051 (tracepoint_create_breakpoints_sal): Likewise.
4052 (strace_marker_create_breakpoints_sal): Get 'lsal' from the
4053 element 0 of vector 'canonical->sals'.
4055 2013-07-05 Luis Machado <lgustavo@codesourcery.com>
4057 * rs6000-tdep.c (rs6000_stab_reg_to_regnum): Return the real
4058 register number instead of the pseudo register one.
4059 (rs6000_dwarf2_reg_to_regnum): Likewise.
4061 2013-07-04 Pedro Alves <palves@redhat.com>
4063 * findvar.c (value_of_register): Use allocate_optimized_out_value
4064 if the register has been optimized out, instead of
4065 set_value_optimized_out.
4066 * frame-unwind.c (frame_unwind_got_optimized): Use
4067 allocate_optimized_out_value.
4069 2013-07-04 Pedro Alves <palves@redhat.com>
4071 * value.c (value_bits_valid): If the value is not lval_computed,
4072 or doesn't have a check_validity hook, assume the value is entirely
4075 2013-07-04 Andrew Burgess <aburgess@broadcom.com>
4077 * stack.c (read_frame_arg): No longer fetch lazy values.
4078 * value.c (value_optimized_out): If the value is not already
4079 marked optimized out, and is lazy then fetch it.
4080 (value_primitive_field): Move optimized out check to later in the
4081 function, after we have loaded any lazy values.
4082 (value_fetch_lazy): Use optimized out flag directly rather than
4083 calling optimized_out method.
4085 2013-07-04 Andrew Burgess <aburgess@broadcom.com>
4087 * valops.c: Don't include "user-regs.h".
4088 (value_fetch_lazy): Moved to value.c.
4089 * value.c: Include "user-regs.h".
4090 (value_fetch_lazy): Moved from valops.c.
4092 2013-07-04 Yao Qi <yao@codesourcery.com>
4095 2013-06-27 Yao Qi <yao@codesourcery.com>
4097 * common/create-version.sh: Update comments. Handle the case
4098 that TARGET_ALIAS is empty.
4100 2013-07-03 Pedro Alves <palves@redhat.com>
4102 * Makefile.in (config.status): Depend on development.sh.
4103 (aclocal_m4_deps): Add libmcheck.m4.
4104 * acinclude.m4: Include libmcheck.m4.
4105 * configure.ac: Source development.sh instead of setting
4106 'development' here. --enable-libmcheck/--disable-libmcheck code
4107 factored out to GDB_AC_LIBMCHECK. Run it.
4108 * development.sh: New file.
4109 * libmcheck.m4: New file.
4110 * configure: Regenerate.
4112 2013-07-02 Tom Tromey <tromey@redhat.com>
4114 * contrib/ari/update-web-ari.sh: Update for version.in change.
4116 2013-07-02 Tom Tromey <tromey@redhat.com>
4118 * common/ptid.h: Comment fixes.
4120 2013-07-01 Tom Tromey <tromey@redhat.com>
4122 * dwarf2read.c (dwarf2_get_dwz_file): Return NULL if
4123 .gnu_debugaltlink not found. Use bfd_get_alt_debug_link_info.
4124 (dwarf2_read_index, create_all_comp_units): Update.
4126 2013-07-01 Tom Tromey <tromey@redhat.com>
4128 * configure.ac (build_warnings): Add -Wold-style-definition.
4129 * configure: Rebuild.
4130 * machoread.c (_initialize_machoread): Use "(void)".
4131 * macrocmd.c (macro_inform_no_debuginfo): Fix formatting;
4134 2013-07-01 Tom Tromey <tromey@redhat.com>
4136 * configure.ac (build_warnings): Add -Wold-style-declaration.
4137 * configure: Rebuild.
4138 * dsrec.c (make_srec): Use "static const", not "const static".
4139 * h8300-tdep.c (h8300_breakpoint_from_pc): Use "static const",
4141 * mi/mi-parse.c (mi_no_values, mi_simple_values, mi_all_values):
4142 Use "static const", not "const static".
4143 * mn10300-tdep.c (mn10300_breakpoint_from_pc): Use "static const",
4145 * moxie-tdep.c (moxie_breakpoint_from_pc): Use "static const",
4147 * rs6000-tdep.c (rs6000_breakpoint_from_pc): Use "static const",
4149 * v850-tdep.c (v850_breakpoint_from_pc): Use "static const",
4151 (v850_dbtrap_breakpoint_from_pc): Likewise.
4152 * xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Use "static const",
4155 2013-07-01 Tom Tromey <tromey@redhat.com>
4157 * configure.ac (build_warnings): Add -Wmissing-parameter-type.
4158 * configure: Rebuild.
4160 2013-07-01 Pedro Alves <palves@redhat.com>
4162 * defs.h: Include "pathmax.h".
4163 * utils.c: Don't include sys/param.h.
4164 (gdb_realpath): Remove code that checks for MAXPATHLEN.
4165 * solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
4166 instead of MAXPATHLEN.
4167 * solib-sunos.c: Don't include sys/param.h.
4168 * xcoffread.c: Don't include sys/param.h.
4169 * bsd-kvm.c: Don't include sys/param.h.
4170 * darwin-nat.c: Don't include sys/param.h.
4171 (darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
4172 * darwin-nat-info.c: Don't include sys/param.h.
4173 * fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
4175 * i386obsd-nat.c: Don't include sys/param.h.
4176 * inf-child.c: Don't include sys/param.h.
4177 (inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
4178 * linux-fork.c: Don't include sys/param.h.
4179 (fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
4180 * linux-nat.c: Don't include sys/param.h.
4181 (linux_child_pid_to_exec_file, linux_proc_pending_signals)
4182 (linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
4183 * m68klinux-nat.c: Don't include sys/param.h.
4184 * nbsd-nat.c: Don't include sys/param.h.
4185 (nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
4186 * ppc-linux-nat.c: Don't include sys/param.h.
4187 * rs6000-nat.c: Don't include sys/param.h.
4188 * spu-linux-nat.c. Don't include sys/param.h.
4189 * windows-nat.c: Don't include sys/param.h.
4190 * xtensa-linux-nat.c: Don't include sys/param.h.
4191 * config/i386/nm-fbsd.h: Don't include sys/param.h.
4193 2013-07-01 Pedro Alves <palves@redhat.com>
4195 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add pathmax.
4196 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/pathmax.m4.
4197 * gnulib/aclocal.m4: Regenerate.
4198 * gnulib/config.in: Regenerate.
4199 * gnulib/configure: Regenerate.
4200 * gnulib/import/pathmax.h: New file.
4201 * gnulib/import/Makefile.am: Regenerate.
4202 * gnulib/import/Makefile.in: Regenerate.
4203 * gnulib/import/m4/gnulib-cache.m4: Regenerate.
4204 * gnulib/import/m4/gnulib-comp.m4: Regenerate.
4205 * gnulib/import/m4/pathmax.m4: New file.
4207 2013-07-01 Pedro Alves <palves@redhat.com>
4209 * configure.ac (GDBINIT): Define, depending on host.
4210 * go32-nat.c (init_go32_ops): Don't override gdbinit here.
4211 * top.c (PATH_MAX): Delete fallback definition.
4212 (GDBINIT_FILENAME): Delete.
4213 (gdbinit): Reimplement as const char array set to the GDBINIT
4215 * top.h (gdbinit): Make const.
4216 * configure, config.in: Regenerate.
4218 2013-07-01 Pedro Alves <palves@redhat.com>
4220 * cli/cli-cmds.c (source_script): Make 'file' parameter const.
4221 * cli/cli-cmds.h (source_script): Likewise.
4222 * exceptions.c (catch_command_errors_const): New function.
4223 * exceptions.h (catch_command_errors_const): Declare.
4224 * main.c (get_init_files): Make parameters const, and adjust.
4225 (captured_main): Make 'system_gdbinit', 'home_gdbinit' and
4226 'local_gdbinit' locals const. Adjust to use
4227 catch_command_errors_const.
4228 (print_gdb_help): Make 'system_gdbinit', 'home_gdbinit' and
4229 'local_gdbinit' locals const.
4231 2013-07-01 Pedro Alves <palves@redhat.com>
4233 * defs.h: Don't check HAVE_UNISTD_H before including <unistd.h>.
4234 (STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO): Delete.
4235 * tracepoint.c: Don't check HAVE_UNISTD_H before including
4238 2013-07-01 Pedro Alves <palves@redhat.com>
4240 Import the "unistd" gnulib module.
4241 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add "unistd".
4242 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/off_t.m4,
4243 import/m4/ssize_t.m4, import/m4/sys_types_h.m4 and
4244 import/m4/unistd_h.m4.
4245 * gnulib/aclocal.m4: Renenerate.
4246 * gnulib/config.in: Renenerate.
4247 * gnulib/configure: Renenerate.
4248 * gnulib/import/Makefile.am: Renenerate.
4249 * gnulib/import/Makefile.in: Renenerate.
4250 * gnulib/import/m4/gnulib-cache.m4: Renenerate.
4251 * gnulib/import/m4/gnulib-comp.m4: Renenerate.
4252 * gnulib/import/m4/off_t.m4: New file.
4253 * gnulib/import/m4/ssize_t.m4: New file.
4254 * gnulib/import/m4/sys_types_h.m4: New file.
4255 * gnulib/import/m4/unistd_h.m4: New file.
4256 * gnulib/import/sys_types.in.h: New file.
4257 * gnulib/import/unistd.c: New file.
4258 * gnulib/import/unistd.in.h: New file.
4260 2013-07-01 Pedro Alves <palves@redhat.com>
4262 * utils.c <pathconf/_PC_PATH_MAX use>: Check if _PC_PATH_MAX is
4263 defined instead of checking HAVE_UNISTD_H.
4265 2013-07-01 Pedro Alves <palves@redhat.com>
4267 Reimport gnulib from scratch.
4268 * gnulib/Makefile.in (aclocal_m4_deps): Remove reference to
4269 import/m4/onceonly.m4.
4270 * gnulib/aclocal.m4: Renegerate.
4271 * gnulib/config.in: Renegerate.
4272 * gnulib/configure: Renegerate.
4273 * gnulib/import/Makefile.in: Renegerate.
4274 * gnulib/import/extra/update-copyright: Renegerate.
4275 * gnulib/import/m4/onceonly.m4: Delete.
4277 2013-07-01 Pedro Alves <palves@redhat.com>
4279 * tui/tui-regs.c (pagination_enabled): Delete declaration.
4281 2013-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
4284 * remote.c (async_remote_interrupt_twice): Make it static.
4285 * remote.h (async_remote_interrupt_twice): Remove the declaration.
4287 2013-06-29 Sergio Durigan Junior <sergiodj@redhat.com>
4289 * ia64-linux-tdep.c: Include <ctype.h>.
4290 (ia64_linux_stap_is_single_operand): New function.
4291 (ia64_linux_init_abi): Initialize SystemTap related attributes.
4293 2013-06-28 Tom Tromey <tromey@redhat.com>
4295 * Makefile.in (version.c): Use version.in, not
4297 * common/create-version.sh: Likewise.
4298 * common/version.in: Move...
4299 * version.in: ...here.
4301 2013-06-28 Pedro Alves <palves@redhat.com>
4303 * infrun.c (set_observer_mode): Don't declare pagination_enabled
4305 * utils.h (pagination_enabled): Declare.
4307 2013-06-28 Pedro Alves <palves@redhat.com>
4309 * infrun.c (non_stop, non_stop_1, set_non_stop, show_non_stop):
4310 Move higher up in file.
4312 2013-06-28 Tom Tromey <tromey@redhat.com>
4314 * tracepoint.c (deprecated_readline_begin_hook)
4315 (deprecated_readline_hook, deprecated_readline_end_hook): Don't
4318 2013-06-28 Pedro Alves <palves@redhat.com>
4321 * tui/tui-regs.c (tui_get_register): Fetch value contents before
4322 checking if they're available.
4323 * value.c (value_available_contents_eq): Change comment.
4324 * value.h (value_available_contents_eq): Expand comment.
4326 2013-06-27 Tom Tromey <tromey@redhat.com>
4328 * target.c (find_run_target): Remove.
4329 * target.h (find_run_target): Remove.
4331 2013-06-27 Tom Tromey <tromey@redhat.com>
4333 * corelow.c (core_gdbarch): Now static.
4335 2013-06-27 Tom Tromey <tromey@redhat.com>
4337 * target.c (target_struct_index): Remove.
4339 2013-06-27 Pedro Alves <palves@redhat.com>
4341 * infrun.c: Remove comment describing the 'stepping over runtime
4342 loader dynamic symbol resolution code' mechanism; moved to
4345 2013-06-27 Pedro Alves <palves@redhat.com>
4347 * exceptions.c (catch_command_errors): Remove spurious space.
4348 * exceptions.h (catch_command_errors): Second parameter is "arg",
4351 2013-06-27 Yao Qi <yao@codesourcery.com>
4353 * common/create-version.sh: Update comments. Handle the case
4354 that TARGET_ALIAS is empty.
4356 2013-06-26 Pedro Alves <palves@redhat.com>
4358 * infrun.c (SOLIB_IN_DYNAMIC_LINKER): Delete macro and describing
4361 2013-06-26 Pedro Alves <palves@redhat.com>
4363 * infrun.c: Update comments on stepping over runtime loader
4364 dynamic symbol resolution code.
4366 2013-06-26 Sergio Durigan Junior <sergiodj@redhat.com>
4368 * ax-gdb.h (union exp_element): Forward declare.
4369 * parser-defs.h: Include expression.h.
4371 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
4373 * mips-tdep.c (fetch_mips_16): Use unmake_compact_addr.
4375 2013-06-26 Dmitry Kozlov <ddk@codesourcery.com>
4377 * tracepoint.c (trace_save): Extend tsave to save starttime, stoptime.
4379 2013-06-26 Dmitry Kozlov <ddk@codesourcery.com>
4381 Fix trace-status to output proper start-time and stop-time.
4382 * tracepoint.c (trace_status_command): Fix type of printf arg to
4383 prevent improper type conversion.
4384 (trace_status_mi): Likewise.
4386 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
4388 * mips-tdep.c (mips_next_pc): Fix a typo.
4390 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
4392 * mips-tdep.c (micromips_scan_prologue): Fix a typo.
4394 2013-06-26 Pedro Alves <pedro@codesourcery.com>
4395 Yao Qi <yao@codesourcery.com>
4397 * mi/mi-cmds.c (mi_cmds): Register -trace-frame-collected.
4398 * mi/mi-cmds.h (mi_cmd_trace_frame_collected): Declare.
4399 * mi/mi-main.c (print_variable_or_computed): New function.
4400 (mi_cmd_trace_frame_collected): New function.
4401 * tracepoint.c (find_trace_state_variable_by_number): New.
4402 (struct traceframe_info): Move to tracepoint.h
4403 (struct collection_list): Likewise.
4404 (do_collect_symbol): Include locals and arguments in the
4405 collected variables list.
4406 (clear_collection_list): Clear wholly collected variables list
4407 and computed variables list.
4408 (append_exp): New function.
4409 (encode_actions_1): Include variables in the wholly
4410 collected variables list. Include memory ranges and
4411 full-fledged expressions in the computed expressions list.
4412 (encode_actions): Move some code to ...
4413 Return the cleanup chain.
4414 (encode_actions_rsp): ... here. New function.
4415 (get_traceframe_location, get_traceframe_info): Remove static.
4416 * tracepoint.h (struct memrange): Moved from tracepoint.c.
4417 (struct collection_list): Moved from tracepoint.c. Add two
4418 new fields 'wholly_collected' and 'computed'.
4419 (find_trace_state_variable_by_number): Declare.
4420 (encode_actions): Adjust declaration.
4421 (encode_actions_rsp): Declare.
4422 (get_traceframe_info, get_traceframe_location): Declare.
4424 * NEWS: Mention new MI command -trace-frame-collected.
4426 2013-06-26 Pedro Alves <pedro@codesourcery.com>
4427 Yao Qi <yao@codesourcery.com>
4429 * ctf.c (ctf_traceframe_info): Push trace state variables
4430 present in the trace data into the traceframe info object.
4431 * breakpoint.c (DEF_VEC_I): Remove.
4432 * common/filestuff.c (DEF_VEC_I): Likewise.
4433 * dwarf2loc.c (DEF_VEC_I): Likewise.
4434 * mi/mi-main.c (DEF_VEC_I): Likewise.
4435 * common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
4436 * features/traceframe-info.dtd: Add tvar element and its
4438 * tracepoint.c (free_traceframe_info): Free vector 'tvars'.
4439 (build_traceframe_info): Push trace state variables present in
4440 the trace data into the traceframe info object.
4441 (traceframe_info_start_tvar): New function.
4442 (tvar_attributes): New.
4443 (traceframe_info_children): Add "tvar" element.
4444 * tracepoint.h (struct traceframe_info) <tvars>: New field.
4446 * NEWS: Mention the change in GDB and GDBserver.
4448 2013-06-26 Pedro Alves <pedro@codesourcery.com>
4449 Yao Qi <yao@codesourcery.com>
4451 * tracepoint.c (trace_dump_command): Move code to ...
4452 (get_traceframe_location): ... here. New.
4454 2013-06-26 Pedro Alves <pedro@codesourcery.com>
4455 Yao Qi <yao@codesourcery.com>
4457 * tracepoint.c (trace_dump_command): GDB emits an error
4458 instead of a warning when a traceframe is not selected.
4460 2013-06-26 Pedro Alves <pedro@codesourcery.com>
4461 Yao Qi <yao@codesourcery.com>
4463 * tracepoint.c (tracepoint_list, stepping_list): Remove.
4464 (clear_collection_list): Free fields 'aexpre_list' and 'list'
4466 (do_clear_collection_list, init_collection_list): New.
4467 (encode_actions): Add local variables 'tracepoint_list' and
4468 'stepping_list'. Call init_collection_list and make cleanup
4469 which calls do_clear_collection_list. Don't call
4470 clear_collection_list.
4471 (_initialize_tracepoint): Delete references to
4472 'tracepoint_list' and 'stepping_list'.
4474 2013-06-25 Tom Tromey <tromey@redhat.com>
4476 * common/create-version.sh (date): Use "$", not "$$" in sed
4479 2013-06-25 Kevin Buettner <kevinb@redhat.com>
4481 * NEWS (New targets): Add entry for TI MSP430.
4483 2013-06-25 Yao Qi <yao@codesourcery.com>
4485 * remote.c (remote_start_remote): Move code to upload tsv
4488 2013-06-25 Yao Qi <yao@codesourcery.com>
4489 Hui Zhu <hui@codesourcery.com>
4490 Pedro Alves <palves@redhat.com>
4492 PR breakpoints/15075
4493 PR breakpoints/15434
4494 * breakpoint.c (bpstat_stop_status): Call
4495 b->ops->after_condition_true.
4496 (update_dprintf_command_list): Don't append "continue" command
4497 to the command list of dprintf breakpoint.
4498 (base_breakpoint_after_condition_true): New function.
4499 (base_breakpoint_ops): Add base_breakpoint_after_condition_true.
4500 (dprintf_after_condition_true): New function.
4501 (initialize_breakpoint_ops): Set dprintf_after_condition_true.
4502 * breakpoint.h (breakpoint_ops): Add after_condition_true.
4504 2013-06-24 Kevin Buettner <kevinb@redhat.com>
4506 * Makefile.in (ALL_TARGET_OBS): Add msp430-tdep.o.
4507 (ALLDEPFILES): Add msp430-tdep.c.
4508 * configure.tgt (msp430*-*-elf): New target.
4509 * msp430-tdep.c: New file.
4511 2013-06-24 Maciej W. Rozycki <macro@codesourcery.com>
4513 * mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
4514 microMIPS synthetic symbols.
4516 2013-06-24 Maciej W. Rozycki <macro@codesourcery.com>
4518 * objfiles.h (pc_in_section): New prototype.
4519 (in_plt_section): Remove name argument, replace prototype with
4520 static inline function.
4521 * mips-tdep.h: Include "objfiles.h".
4522 (in_mips_stubs_section): New function.
4523 * hppa-tdep.h (gdbarch_tdep): Remove name argument of
4524 in_solib_call_trampoline member.
4525 (hppa_in_solib_call_trampoline): Remove name argument.
4526 * objfiles.c (pc_in_section): New function.
4527 (in_plt_section): Remove function.
4528 * mips-linux-tdep.c: Include "objfiles.h".
4529 (mips_linux_in_dynsym_stub): Call in_mips_stubs_section. Remove
4530 name argument. Return 1 rather than the low 16-bit halfword of
4531 any instruction examined.
4532 (mips_linux_in_dynsym_resolve_code): Update
4533 mips_linux_in_dynsym_stub call accordingly.
4534 * mips-tdep.c (mips_stub_frame_sniffer): Use in_mips_stubs_section
4535 rather than an equivalent hand-coded sequence.
4536 * hppa-hpux-tdep.c (in_opd_section): Remove function.
4537 (hppa32_hpux_in_solib_call_trampoline): Remove name argument.
4538 (hppa64_hpux_in_solib_call_trampoline): Likewise.
4539 (hppa64_hpux_find_global_pointer): Use pc_in_section rather than
4541 * hppa-tdep.c (hppa_stub_unwind_sniffer): Remove name argument
4542 on call to tdep->in_solib_call_trampoline.
4543 (hppa_in_solib_call_trampoline): Remove name argument, update
4544 according to in_plt_section change.
4545 (hppa_skip_trampoline_code): Update according to in_plt_section
4547 * aarch64-tdep.c (aarch64_stub_unwind_sniffer): Likewise.
4548 * arm-symbian-tdep.c (arm_symbian_skip_trampoline_code):
4550 * arm-tdep.c (arm_stub_unwind_sniffer): Likewise.
4551 * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
4552 * hppabsd-tdep.c (hppabsd_find_global_pointer): Likewise.
4553 * nios2-tdep.c (nios2_stub_frame_sniffer): Likewise.
4554 * nto-tdep.c (nto_relocate_section_addresses): Likewise.
4555 * s390-tdep.c (s390_stub_frame_sniffer): Likewise.
4556 * sh-tdep.c (sh_stub_unwind_sniffer): Likewise.
4557 * solib-dsbt.c (dsbt_in_dynsym_resolve_code): Likewise.
4558 * solib-frv.c (frv_in_dynsym_resolve_code): Likewise.
4559 * solib-svr4.c (svr4_in_dynsym_resolve_code): Likewise.
4560 * solib-target.c (solib_target_in_dynsym_resolve_code): Likewise.
4561 * sparc-tdep.c (sparc_analyze_prologue): Likewise.
4562 * tic6x-tdep.c (tic6x_stub_unwind_sniffer): Likewise.
4564 2013-06-24 Joel Brobecker <brobecker@adacore.com>
4566 * common/create-version.sh: Fix expansion of $host_alias
4567 and $target_alias in generation of HOST_NAME and TARGET_NAME
4570 2013-06-24 Tom Tromey <tromey@redhat.com>
4572 * common/create-version.sh: New file.
4573 * Makefile.in (version.c): Use bfd/version.h, common/version.in,
4575 (HFILES_NO_SRCDIR): Use common/version.h.
4576 * version.in: Move to ...
4577 * common/version.in: ... here. Replace date with "DATE".
4578 * version.h: Move to ...
4579 * common/version.h: ... here.
4581 2013-06-21 Joel Brobecker <brobecker@adacore.com>
4583 * gdb/gnulib/Makefile.in: Update date in copyright header.
4584 * gdb/gnulib/configure.ac: Ditto.
4585 * gdb/gnulib/update-gnulib.sh: Ditto.
4587 2013-06-21 Joel Brobecker <brobecker@adacore.com>
4589 * copyright.py (EXCLUDE_LIST): Replace "gdb/gnulib" by
4590 "gdb/gnulib/import".
4592 2013-06-21 Will Newton <will.newton@linaro.org>
4594 * doublest.c (ldfrexp): Remove function.
4595 (convert_doublest_to_floatformat): Call frexpl instead of
4598 2013-06-21 Will Newton <will.newton@linaro.org>
4600 * gnulib/update-gnulib.sh(IMPORTED_GNULIB_MODULES): Add frexpl.
4601 * gnulib/aclocal.m4: Regenerate.
4602 * gnulib/config.in: Regenerate.
4603 * gnulib/configure: Regenerate.
4604 * gnulib/import/Makefile.am: Update.
4605 * gnulib/import/Makefile.in: Update.
4606 * gnulib/import/m4/gnulib-cache.m4: Update.
4607 * gnulib/import/m4/gnulib-comp.m4: Update.
4608 * gnulib/import/float+.h: Import.
4609 * gnulib/import/float.c: Import.
4610 * gnulib/import/float.in.h: Import.
4611 * gnulib/import/fpucw.h: Import.
4612 * gnulib/import/frexp.c: Import.
4613 * gnulib/import/frexpl.c: Import.
4614 * gnulib/import/isnan.c: Import.
4615 * gnulib/import/isnand-nolibm.h: Import.
4616 * gnulib/import/isnand.c: Import.
4617 * gnulib/import/isnanl-nolibm.h: Import.
4618 * gnulib/import/isnanl.c: Import.
4619 * gnulib/import/itold.c: Import.
4620 * gnulib/import/m4/exponentd.m4: Import.
4621 * gnulib/import/m4/exponentl.m4: Import.
4622 * gnulib/import/m4/float_h.m4: Import.
4623 * gnulib/import/m4/fpieee.m4: Import.
4624 * gnulib/import/m4/frexp.m4: Import.
4625 * gnulib/import/m4/frexpl.m4: Import.
4626 * gnulib/import/m4/isnand.m4: Import.
4627 * gnulib/import/m4/isnanl.m4: Import.
4628 * gnulib/import/m4/math_h.m4: Import.
4629 * gnulib/import/math.c: Import.
4630 * gnulib/import/math.in.h: Import.
4632 2013-06-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4634 * common/linux-btrace.c (cpu_supports_btrace): Remove variable vendor,
4635 replace strcmp with signature_INTEL_ebx, signature_INTEL_ecx and
4636 signature_INTEL_edx comparisons.
4638 2013-06-20 Doug Evans <dje@google.com>
4641 * dwarf2read.c (try_open_dwop_file): New arg search_cwd.
4642 All callers updated.
4643 (open_dwp_file): If we can't find the dwp file, search the basename
4644 in debug-file-directory.
4646 * dwarf2read.c (struct dwp_file): Fix comment.
4647 (open_and_init_dwp_file): Set dwp_file->name to bfd's file name.
4649 * source.c (openp): Document OPF_TRY_CWD_FIRST+OPF_SEARCH_IN_PATH
4652 2013-06-20 Yao Qi <yao@codesourcery.com>
4654 * breakpoint.c (create_breakpoint): Fix code indentation.
4656 2013-06-20 Yao Qi <yao@codesourcery.com>
4658 * breakpoint.c (create_breakpoints_sal_default): Remove
4659 parameter 'lsal'. Update declaration.
4660 (bkpt_create_breakpoints_sal): Caller update.
4661 (tracepoint_create_breakpoints_sal): Likewise.
4663 2013-06-20 Pedro Alves <pedro@codesourcery.com>
4664 Yao Qi <yao@codesourcery.com>
4666 * NEWS: Mention the new option '--skip-unavailable' of command
4667 -data-list-register-values.
4668 * mi/mi-main.c (mi_cmd_data_list_register_values): Accept the
4669 --skip-unavailable option. Adjust to use output_register.
4670 (output_register): Add new 'skip_unavailable' parameter.
4673 2013-06-19 Mike Frysinger <vapier@gentoo.org>
4675 * Makefile.in (HFILES_NO_SRCDIR): Add common/i386-cpuid.h and
4676 common/i386-gcc-cpuid.h.
4677 * common/i386-cpuid.h: New wrapper header around i386-gcc-cpuid.h.
4678 * common/i386-gcc-cpuid.h: Rename from testsuite/gdb.arch/i386-cpuid.h.
4679 Copy the latest version from upstream gcc.
4680 * common/linux-btrace.c: Include i386-cpuid.h.
4681 (intel_supports_btrace): Delete x86 ifdefs and replace inline asm with
4683 (cpu_supports_btrace): Likewise.
4684 * go32-nat.c: Include i386-cpuid.h.
4685 (go32_sysinfo): Add (disabled) calls to i386_cpuid with comments.
4687 2013-06-19 Doug Evans <dje@google.com>
4689 * symfile.c (symfile_bfd_open): Delete unnecessary declaration.
4690 (get_section_index): Ditto.
4692 2013-06-19 Tom Tromey <tromey@redhat.com>
4694 * breakpoint.c (_initialize_breakpoint): Remove trailing \n from
4697 2013-06-18 Doug Evans <dje@google.com>
4699 * dwarf2read.c (dw2_symtab_iter_next): Check value of cu_index
4701 (dw2_expand_symtabs_matching): Fix symbol kind validity check.
4702 Move test of cu_index closer to use. Print complaint if cu_index
4705 2013-06-18 Joel Brobecker <brobecker@adacore.com>
4707 * machoread.c (oso_vector): Delete this global.
4708 (macho_register_oso): Add new parameter "oso_vector_ptr".
4709 Use it instead of the "oso_vector" global.
4710 (macho_symtab_read, macho_symfile_read_all_oso): Likewise.
4711 (macho_symfile_read): Use a local oso_vector, to be free'ed
4712 at the end of this function, in place of the old "oso_vector"
4713 global. Update various function calls accordingly. Use one
4714 single cleanup chain for the entire function.
4716 2013-06-18 Joel Brobecker <brobecker@adacore.com>
4718 * dwarf2read.c (dwarf2_per_objfile_free): Replace uses of
4719 DWARF2_PER_OBJFILE by uses of DATA instead.
4721 2013-06-18 Tom Tromey <tromey@redhat.com>
4723 * break-catch-sig.c (signal_catchpoint_explains_signal): Add 'sig'
4725 * breakpoint.c (bpstat_explains_signal): Add 'sig' argument.
4726 Special case signals other than GDB_SIGNAL_TRAP.
4727 (explains_signal_watchpoint): New function.
4728 (base_breakpoint_explains_signal): Add 'sig' argument.
4729 (initialize_breakpoint_ops): Set 'explains_signal' method for
4731 * breakpoint.h (struct breakpoint_ops) <explains_signal>: Add
4733 (bpstat_explains_signal): Likewise.
4734 * infrun.c (handle_syscall_event, handle_inferior_event): Update.
4736 2013-06-18 Tom Tromey <tromey@redhat.com>
4738 * python/py-inferior.c (gdbpy_selected_inferior): Don't incref.
4740 2013-06-18 Tom Tromey <tromey@redhat.com>
4742 * python/python.c (finish_python_initialization): Decref
4743 'pythondir' on failure path as well.
4745 2013-06-18 Tom Tromey <tromey@redhat.com>
4748 * dwarf2loc.c (read_pieced_value): Truncate this_size_bits
4749 after taking bits_to_skip into account. Sign extend byte_offset.
4750 * utils.h (gdb_sign_extend): Declare.
4751 * utils.c (gdb_sign_extend): New function.
4753 2013-06-18 Jan Kratochvil <jan.kratochvil@redhat.com>
4755 * dwarf2read.c (write_psymtabs_to_index): Ignore NULL PSYMTAB.
4757 2013-06-17 Pierre Muller <muller@sourceware.org>
4759 * corelow.c (core_open): Print GDB signal name instead of target
4762 2013-06-17 Mike Frysinger <vapier@gentoo.org>
4764 * .gitignore: Add /gcore.
4766 2013-06-13 Doug Evans <dje@google.com>
4768 * dwarf2read.c (try_open_dwop_file): Work around behaviour of
4769 OPF_TRY_CWD_FIRST to not search path if the file contains a '/'.
4771 2013-06-12 Phil Muldoon <pmuldoon@redhat.com>
4773 * stack.c (backtrace_command_1): Fix indentation.
4775 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4777 * window-nat.c (thread_rec): Add missing empty line after
4778 local variable declaration.
4780 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4782 * windows-nat.c (thread_rec): Revert format used to print
4783 error code returned by SuspendThread from %d back to %u.
4785 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4787 * windows-nat.c (windows_continue): Add "0x" prefix for thread
4789 (get_windows_debug_event): Likewise, for all debug traces.
4791 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4793 * window-nat.c (thread_rec): Add thread ID in SuspendThread
4796 2013-06-08 Pedro Alves <pedro@codesourcery.com>
4797 Yao Qi <yao@codesourcery.com>
4799 * mi/mi-main.c (get_register): Remove declaration.
4800 (output_register): Declare.
4801 (mi_cmd_data_list_register_values): Remove local variable
4802 'tuple_cleanup'. Move some code into output_register.
4803 (get_register): Renamed to ...
4804 (output_register): ... this. Output the register's
4805 "number" ui_out tuple here.
4807 2013-06-07 Pedro Alves <palves@redhat.com>
4809 * darwin-nat.c: Fix formating in copyright header.
4810 * darwin-nat.h: Likewise.
4811 * gnu-nat.c: Likewise.
4812 * machoread.c: Likewise.
4814 2013-06-07 Pedro Alves <palves@redhat.com>
4817 * regformats/regdat.sh: Output #include tdesc.h. Make globals
4818 static. Output a global target description pointer.
4819 (init_registers_${name}): Adjust to initialize a
4820 target description structure.
4822 2013-06-07 Will Newton <will.newton@linaro.org>
4824 * printcmd.c (build_address_symbolic): Call
4825 gdbarch_addr_bits_remove for text minimal symbols.
4827 2013-06-07 Will Newton <will.newton@linaro.org>
4829 * MAINTAINERS: Add myself to Write After Approval.
4831 2013-06-07 Yao Qi <yao@codesourcery.com>
4833 * tracepoint.c (start_tracing): Move code to ...
4834 (trace_reset_local_state): ... here. New.
4835 (disconnect_tracing): Don't call set_current_traceframe,
4836 set_tracepoint_num, and set_traceframe_context. Call
4837 trace_reset_local_state instead.
4838 (tfile_close): Call trace_reset_local_state.
4839 * ctf.c (ctf_close): Likewise.
4840 * remote.c (remote_close): Likewise.
4841 * tracepoint.h (trace_reset_local_state): Declare.
4843 2013-06-06 Doug Evans <dje@google.com>
4845 * dwarf2read.c: Whitespace fixes for DWP file format documentation,
4846 and fix header docs.
4848 2013-06-05 Doug Evans <dje@google.com>
4849 Keith Seitz <keiths@redhat.com>
4852 * cp-namespace.c (find_symbol_in_baseclass): Call
4853 cp_lookup_symbol_in_namespace instead of cp_lookup_symbol_namespace.
4854 Check result of call to lookup_symbol_static.
4855 Call lookup_static_symbol_aux unconditionally.
4856 Call check_typedef on base types before accessing them.
4857 (cp_lookup_nested_symbol): Fix comment.
4859 2013-06-05 Luis Machado <lgustavo@codesourcery.com>
4861 * gnu-v3-abi.c (gnuv3_skip_trampoline): Handle thunk
4862 minimal symbols pointing to function descriptors.
4864 2013-06-05 Tom Tromey <tromey@redhat.com>
4866 * python/py-utils.c (gdb_pymodule_addobject): Cast away const.
4868 2013-06-04 Sergio Durigan Junior <sergiodj@redhat.com>
4869 Pedro Alves <palves@redhat.com>
4871 * remote.c (remote_wait_as): Restore signal handler before returning
4872 when GDB gets a notification.
4874 2013-06-04 Gary Benson <gbenson@redhat.com>
4877 * breakpoint.h (handle_solib_event): Moved function declaration
4879 * breakpoint.c (handle_solib_event): Moved function to solib.c.
4880 (bpstat_stop_status): Pass new argument to handle_solib_event.
4881 * solib.h (update_solib_breakpoints): New function declaration.
4882 (handle_solib_event): Moved function declaration from
4884 * solib.c (update_solib_breakpoints): New function.
4885 (handle_solib_event): Moved function from breakpoint.c.
4886 Updated to call solib_ops->handle_event if not NULL.
4887 * solist.h (target_so_ops): New fields "update_breakpoints" and
4889 * infrun.c (set_stop_on_solib_events): New function.
4890 (_initialize_infrun): Use the above for "set
4891 stop-on-solib-events".
4892 (handle_inferior_event): Pass new argument to handle_solib_event.
4893 * solib-svr4.c (probe.h): New include.
4894 (svr4_free_library_list): New forward declaration.
4895 (probe_action): New enum.
4896 (probe_info): New struct.
4897 (probe_info): New static variable.
4898 (NUM_PROBES): New definition.
4899 (svr4_info): New fields "using_xfer", "probes_table" and
4901 (free_probes_table): New function.
4902 (free_solib_list): New function.
4903 (svr4_pspace_data_cleanup): Free probes table and solib list.
4904 (svr4_copy_library_list): New function.
4905 (svr4_current_sos_via_xfer_libraries): New parameter "annex".
4906 (svr4_read_so_list): New parameter "prev_lm".
4907 (svr4_current_sos_direct): Renamed from "svr4_current_sos".
4908 (svr4_current_sos): New function.
4909 (probe_and_action): New struct.
4910 (hash_probe_and_action): New function.
4911 (equal_probe_and_action): Likewise.
4912 (register_solib_event_probe): Likewise.
4913 (solib_event_probe_at): Likewise.
4914 (solib_event_probe_action): Likewise.
4915 (solist_update_full): Likewise.
4916 (solist_update_incremental): Likewise.
4917 (disable_probes_interface_cleanup): Likewise.
4918 (svr4_handle_solib_event): Likewise.
4919 (svr4_update_solib_event_breakpoint): Likewise.
4920 (svr4_update_solib_event_breakpoints): Likewise.
4921 (svr4_create_solib_event_breakpoints): Likewise.
4922 (enable_break): Free probes table before creating breakpoints.
4923 Use svr4_create_solib_event_breakpoints to create breakpoints.
4924 (svr4_solib_create_inferior_hook): Free the solib list.
4925 (_initialize_svr4_solib): Initialise
4926 svr4_so_ops.handle_solib_event and svr4_so_ops.update_breakpoints.
4928 2013-06-04 Gary Benson <gbenson@redhat.com>
4930 * target.h (target_ops): New field
4931 "to_augmented_libraries_svr4_read".
4932 (target_augmented_libraries_svr4_read): New macro.
4933 * target.c (update_current_target): Handle
4934 to_augmented_libraries_svr4_read.
4935 * remote.c (remote_state): New field
4936 "augmented_libraries_svr4_read".
4937 (remote_augmented_libraries_svr4_read_feature): New function.
4938 (remote_protocol_features): Add entry for
4939 "augmented-libraries-svr4-read".
4940 (remote_augmented_libraries_svr4_read): New function.
4941 (init_remote_ops): Initialize
4942 remote_ops.to_augmented_libraries_svr4_read.
4944 2013-06-04 Gary Benson <gbenson@redhat.com>
4948 2013-06-04 Gary Benson <gbenson@redhat.com>
4950 * objfiles.h (inhibit_section_map_updates): New function
4952 (resume_section_map_updates): Likewise.
4953 (resume_section_map_updates_cleanup): Likewise.
4954 * objfiles.c (objfile_pspace_info): Removed field
4955 "objfiles_changed_p". New fields "new_objfiles_available",
4956 "section_map_dirty" and "inhibit_updates".
4957 (allocate_objfile): Set new_objfiles_available.
4958 (free_objfile): Set section_map_dirty.
4959 (objfile_relocate1): Likewise.
4960 (in_plt_section): Likewise.
4961 (find_pc_section): Update the conditions under which the
4962 section map will be updated.
4963 (inhibit_section_map_updates): New function.
4964 (resume_section_map_updates): Likewise.
4965 (resume_section_map_updates_cleanup): Likewise.
4967 2013-06-04 Gary Benson <gbenson@redhat.com>
4969 * probe.h (get_probe_argument_count): New declaration.
4970 (evaluate_probe_argument): Likewise.
4971 * probe.c (get_probe_argument_count): New function.
4972 (evaluate_probe_argument): Likewise.
4973 (probe_safe_evaluate_at_pc): Use the above new functions.
4975 2013-06-04 Alan Modra <amodra@gmail.com>
4977 * ppc-tdep.h (ppc_insns_match_pattern): Update prototype.
4978 * rs6000-tdep.c (read_insn): Add frame param, don't assume big-endian.
4979 (ppc_insns_match_pattern): Add frame param. Avoid multiple
4980 target mem reads on optional insns.
4981 * ppc-linux-tdep.c (ppc_skip_trampoline_code): Update
4982 ppc_insns_match_pattern calls.
4983 * ppc64-tdep.c (ppc64_standard_linkage2, ppc64_standard_linkage3):
4984 Add match for power7 thread safety insns, and new order of
4985 std 2,40(1) insn. Correct code shown for _dl_runtime_resolve
4986 invocation in comment, and update rest of comment.
4987 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN,
4988 PPC64_STANDARD_LINKAGE3_LEN): Delete.
4989 (ppc64_standard_linkage2_target): Update insn offsets.
4990 (ppc64_skip_trampoline_code): Use a single insn buffer. Match newer
4991 stubs first. Update calls.
4993 2013-06-04 Yao Qi <yao@codesourcery.com>
4995 * solib.c (solib_find): Don't need dir separator if path has
4998 2013-06-03 Joel Brobecker <brobecker@adacore.com>
5000 Revert (indirectly causes a SIGSEGV):
5001 * machoread.c (macho_symfile_read): Assign first cleanup to
5004 2013-06-03 Yao Qi <yao@codesourcery.com>
5006 * mi/mi-cmd-var.c (mi_no_values, mi_simple_values): Move to
5007 mi-parse.c. Make them static.
5008 (mi_all_values): Likewise.
5009 (mi_parse_values_option): Move to mi-parse.c. Rename it to
5010 mi_parse_print_values. Make it external.
5011 * mi/mi-cmds.h (mi_no_values, mi_simple_values, mi_all_values):
5012 Remove the declarations.
5013 * mi/mi-parse.c (mi_parse_print_values): Moved from mi-cmd-var.c.
5014 * mi/mi-parse.h (mi_parse_print_values): Declare.
5015 * mi/mi-cmd-stack.c: Include mi-parse.h.
5016 (parse_print_values): Remove
5017 (mi_cmd_stack_list_locals): Call mi_parse_print_values instead
5018 of parse_print_values.
5019 (mi_cmd_stack_list_args, mi_cmd_stack_list_variables): Likewise.
5021 2013-05-31 Pedro Alves <pedro@codesourcery.com>
5022 Yao Qi <yao@codesourcery.com>
5024 * tracepoint.c (all_tracepoint_actions_and_cleanup): Declare.
5025 (encode_actions): Move code to ...
5026 (all_tracepoint_actions_and_cleanup): ... here. New.
5027 (trace_dump_command): Likewise.
5029 2013-05-30 Tom Tromey <tromey@redhat.com>
5031 * symmisc.c (maintenance_expand_symtabs): Call do_cleanups.
5033 2013-05-30 Tom Tromey <tromey@redhat.com>
5035 * xml-support.c (gdb_xml_create_parser_and_cleanup): Rename from
5036 gdb_xml_create_parser_and_cleanup_1. Return a cleanup. Remove
5037 'old_chain' argument. Add 'parser_result' argument.
5038 (gdb_xml_create_parser_and_cleanup): Remove old version.
5039 (gdb_xml_parse_quick): Update.
5040 (xml_process_xincludes): Update.
5041 * xml-support.h (gdb_xml_create_parser_and_cleanup): Don't
5044 2013-05-30 Tom Tromey <tromey@redhat.com>
5046 * probe.c (collect_probes): Check arguments for NULL before
5047 calling compile_rx_or_error.
5048 * utils.c (compile_rx_or_error): Require 'rx' to be non-NULL.
5051 2013-05-30 Tom Tromey <tromey@redhat.com>
5053 * infrun.c (adjust_pc_after_break): Introduce an outer null
5056 2013-05-30 Tom Tromey <tromey@redhat.com>
5058 * mi/mi-cmd-var.c (varobj_update_one): Add an outer null cleanup.
5060 2013-05-30 Tom Tromey <tromey@redhat.com>
5062 * cli/cli-script.c (read_command_lines_1): Use a null cleanup
5063 for 'old_chain'. Do not check 'head' before processing
5066 2013-05-30 Tom Tromey <tromey@redhat.com>
5068 * mi/mi-cmd-stack.c (list_arg_or_local): Remove
5071 2013-05-30 Tom Tromey <tromey@redhat.com>
5073 * dbxread.c (dbx_read_symtab): Declare 'back_to' in a more
5074 inner scope. Unconditionally call do_cleanups.
5076 2013-05-30 Tom Tromey <tromey@redhat.com>
5078 * source.c (find_and_open_source): Call do_cleanups.
5080 2013-05-30 Tom Tromey <tromey@redhat.com>
5082 * linux-thread-db.c (thread_db_load_search): Unconditionally
5085 2013-05-30 Tom Tromey <tromey@redhat.com>
5087 * solib-aix.c (solib_aix_bfd_open): Don't use a null cleanup
5088 for 'cleanup'; instead use a later one.
5090 2013-05-30 Tom Tromey <tromey@redhat.com>
5092 * python/py-breakpoint.c (bppy_get_commands): Use
5093 explicit, unconditional return.
5094 * python/py-frame.c (frapy_read_var): Likewise.
5095 * python/python.c (gdbpy_decode_line): Likewise.
5097 2013-05-30 Tom Tromey <tromey@redhat.com>
5099 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Call
5100 do_cleanups on all return paths.
5102 2013-05-30 Tom Tromey <tromey@redhat.com>
5104 * top.c (execute_command): Discard 'cleanup_if_error' cleanups.
5106 2013-05-30 Tom Tromey <tromey@redhat.com>
5108 * stabsread.c (read_struct_type): Call do_cleanups along
5111 2013-05-30 Maciej W. Rozycki <macro@codesourcery.com>
5113 * mips-linux-tdep.c: Adjust formatting throughout.
5115 2013-05-30 Tom Tromey <tromey@redhat.com>
5117 * mipsread.c (read_alphacoff_dynamic_symtab): Call do_cleanups
5118 along all return paths.
5120 2013-05-30 Tom Tromey <tromey@redhat.com>
5122 * symfile.c (find_separate_debug_file): Call do_cleanups
5123 along all return paths.
5125 2013-05-30 Tom Tromey <tromey@redhat.com>
5127 * symtab.c (search_symbols): Introduce a null cleanup for
5130 2013-05-30 Tom Tromey <tromey@redhat.com>
5132 * python/py-value.c (valpy_binop): Call do_cleanups before
5135 2013-05-30 Tom Tromey <tromey@redhat.com>
5137 * python/py-prettyprint.c (print_children): Remove extra
5140 2013-05-30 Tom Tromey <tromey@redhat.com>
5142 * python/py-frame.c (frapy_read_var): Call do_cleanups along
5145 2013-05-30 Tom Tromey <tromey@redhat.com>
5147 * python/py-breakpoint.c (bppy_get_commands): Call do_cleanups
5148 along all return paths.
5150 2013-05-30 Tom Tromey <tromey@redhat.com>
5152 * cli/cli-logging.c (set_logging_redirect): Unconditionally
5155 2013-05-30 Tom Tromey <tromey@redhat.com>
5157 * varobj.c (c_value_of_root): Call do_cleanups along all
5160 2013-05-30 Tom Tromey <tromey@redhat.com>
5162 * tracepoint.c (trace_dump_command): Unconditionally call
5165 2013-05-30 Tom Tromey <tromey@redhat.com>
5167 * breakpoint.c (output_thread_groups, parse_cmd_to_aexpr): Call
5168 do_cleanups earlier.
5170 2013-05-30 Tom Tromey <tromey@redhat.com>
5172 * machoread.c (macho_symfile_read): Assign first cleanup to
5175 2013-05-30 Tom Tromey <tromey@redhat.com>
5177 * m32r-rom.c (m32r_load): Call do_cleanups at all returns.
5179 2013-05-30 Tom Tromey <tromey@redhat.com>
5181 * mi/mi-main.c (list_available_thread_groups): Call do_cleanups.
5183 2013-05-30 Tom Tromey <tromey@redhat.com>
5185 * inf-ptrace.c (inf_ptrace_create_inferior): Unconditionally
5186 call discard_cleanups.
5187 (inf_ptrace_attach): Likewise.
5189 2013-05-30 Tom Tromey <tromey@redhat.com>
5191 * remote-mips.c (mips_exit_debug): Call do_cleanups on all
5193 (mips_initialize): Likewise.
5194 (common_open): Call do_cleanups.
5196 2013-05-30 Tom Tromey <tromey@redhat.com>
5198 * utils.c (internal_vproblem): Call do_cleanups.
5200 2013-05-30 Tom Tromey <tromey@redhat.com>
5202 * linespec.c (find_linespec_symbols): Don't reassign to 'cleanup'.
5204 2013-05-30 Tom Tromey <tromey@redhat.com>
5206 * cli/cli-script.c (setup_user_args): Don't return after error.
5208 2013-05-30 Tom Tromey <tromey@redhat.com>
5210 * somread.c (som_symtab_read): Call do_cleanups.
5212 2013-05-30 Tom Tromey <tromey@redhat.com>
5214 * printcmd.c (print_command_1): Unconditionally call do_cleanups.
5216 2013-05-30 Tom Tromey <tromey@redhat.com>
5218 * cli/cli-cmds.c (cd_command, alias_command): Call do_cleanups.
5219 * cli/cli-dump.c (restore_binary_file): Call do_cleanups.
5220 * interps.c (interpreter_exec_cmd): Call do_cleanups.
5221 * source.c (show_substitute_path_command): Call do_cleanups.
5222 (unset_substitute_path_command, set_substitute_path_command):
5224 * symfile.c (load_command): Call do_cleanups.
5226 2013-05-30 Tom Tromey <tromey@redhat.com>
5228 * contrib/cleanup_check.py: New file.
5229 * contrib/gcc-with-excheck: Add option parsing.
5231 2013-05-30 Joel Brobecker <brobecker@adacore.com>
5233 * windows-nat.c (windows_delete_thread): Add missing space
5236 2013-05-30 Hafiz Abid Qadeer <abidh@codesourcery.com>
5238 * inferior.c (top level): Include tilde.h.
5239 (add_inferior_command): Call tilde_expand on the value of 'exec'
5242 2013-05-30 Pedro Alves <pedro@codesourcery.com>
5243 Yao Qi <yao@codesourcery.com>
5245 * tracepoint.c (encode_actions_1): Remove parameter 't'.
5247 (encode_actions): Likewise.
5248 * remote.c (remote_download_tracepoint): Caller update.
5249 * tracepoint.h (encode_actions): Update declaration.
5251 2013-05-30 Pedro Alves <palves@redhat.com>
5253 * python/python-internal.h (gdb_Py_DECREF): Cast OP to PyObject
5256 2013-05-30 Yao Qi <yao@codesourcery.com>
5258 * remote.c (remote_check_symbols): Remove unused parameter
5261 (remote_start_remote, remote_new_objfile): Caller update.
5263 2013-05-30 Yao Qi <yao@codesourcery.com>
5265 * mi/mi-cmds.c (mi_cmds): Define MI command
5266 '-exec-arguments' by macro DEF_MI_CMD_CLI_1 instead of
5269 2013-05-29 Pedro Alves <palves@redhat.com>
5271 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint)
5272 (remote_insert_watchpoint, remote_remove_watchpoint)
5273 (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
5274 (remote_verify_memory, compare_sections_command)
5275 (remote_search_memory): Set the general process/thread on the
5278 2013-05-29 Pedro Alves <palves@redhat.com>
5280 * aarch64-tdep.c: Don't include "features/aarch64-without-fpu.c".
5281 (_initialize_aarch64_tdep): Don't call
5282 initialize_tdesc_aarch64_without_fpu.
5283 * features/Makefile (WHICH): Remove reference to
5284 aarch64-without-fpu.
5285 * features/aarch64-without-fpu.c: Delete file.
5286 * regformats/aarch64-without-fpu.dat: Delete file.
5288 2013-05-28 Yao Qi <yao@codesourcery.com>
5290 * tracepoint.c (stringify_collection_list): Remove parameter
5292 (encode_actions): Caller update. Remove local variables.
5294 2013-05-24 Yao Qi <yao@codesourcery.com>
5296 * tracepoint.c (TFILE_PID): Remove.
5297 (tfile_open): Don't add thread and inferior.
5298 (tfile_close): Don't set 'inferior_ptid'. Don't call
5299 exit_inferior_silent.
5300 (tfile_thread_alive): Remove.
5301 (init_tfile_ops): Don't set field 'to_thread_alive' of
5304 2013-05-23 Doug Evans <dje@google.com>
5306 * contrib/cc-with-tweaks.sh (-p): Handle no dwo files.
5308 2013-05-23 Pedro Alves <palves@redhat.com>
5310 * common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
5311 [HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
5312 (socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
5313 Only define if HAVE_SOCKETS is defined.
5314 * configure.ac: Check for sys/socket.h.
5315 * config.in, configure: Regenerate.
5317 2013-05-23 Pedro Alves <palves@redhat.com>
5319 * dwarf2read.c (create_dwp_hash_table, create_dwo_in_dwp)
5320 (open_and_init_dwp_file): Use %s/pulongest instead of %u for
5321 printing uint32_t variables.
5323 2013-05-23 Pedro Alves <palves@redhat.com>
5325 * NEWS: Mention GDBserver range stepping support.
5327 2013-05-23 Yao Qi <yao@codesourcery.com>
5328 Pedro Alves <palves@redhat.com>
5330 * gdbthread.h (struct thread_control_state) <may_range_step>: New
5332 * infcmd.c (step_once, until_next_command): Enable range stepping.
5333 * infrun.c (displaced_step_prepare): Disable range stepping.
5334 (resume): Disable range stepping if stepping over a breakpoint or
5335 we have software watchpoints. If range stepping is enabled,
5336 assert the thread is in the stepping range.
5337 (clear_proceed_status_thread): Clear may_range_step.
5338 (handle_inferior_event): Disable range stepping as soon as we know
5339 the thread that hit the event. Re-enable it whenever we're going
5340 to step with a step range.
5341 * remote.c (struct vCont_action_support) <r>: New field.
5342 (use_range_stepping): New global.
5343 (remote_vcont_probe): Handle 'r' action.
5344 (append_resumption): Append an 'r' action if the thread may range
5346 (show_range_stepping): New function.
5347 (set_range_stepping): New function.
5348 (_initialize_remote): Call add_setshow_boolean_cmd to register the
5349 'set range-stepping' and 'show range-stepping' commands.
5350 * NEWS: Mention range stepping, the new vCont;r action, and the
5351 new "set/show range-stepping" commands.
5353 2013-05-23 Yao Qi <yao@codesourcery.com>
5354 Pedro Alves <palves@redhat.com>
5356 * remote.c (struct vCont_action_support): New struct.
5357 (struct remote_state) <support_vCont_t>: Remove field.
5358 <vCont_actions_support>: New field.
5359 (remote_vcont_probe, remote_stop_ns): Update.
5361 2013-05-23 Yao Qi <yao@codesourcery.com>
5362 Pedro Alves <palves@redhat.com>
5364 * gdbthread.h (pc_in_thread_step_range): New declaration.
5365 * thread.c (pc_in_thread_step_range): New function.
5366 * infrun.c (handle_inferior_event): Use it.
5368 2013-05-23 Joel Brobecker <brobecker@adacore.com>
5370 * mi/mi-cmd-break.c (mi_argv_to_format): Use xsnprintf instead
5373 2013-05-22 Keith Seitz <keiths@redhat.com>
5375 * ada-lang.c (is_known_support_routine): Add explicit free of
5376 'func_name' from find_frame_funname.
5377 (ada_unhandled_exception_name_addr_from_raise): Add cleanups
5378 for func_name from find_frame_funname.
5379 * python/py-frame.c (frapy_name): Add explicit free of
5380 'name' from find_frame_funname.
5381 * stack.c (find_frame_funname): Add comment explaining that
5382 funcp must be freed by the caller.
5383 Return copy of symbol names instead of pointers.
5384 (print_frame): Add a cleanup for 'funname' from
5386 * stack.h (find_frame_funname): Remove "const" from
5387 'funname' parameter.
5389 2013-05-22 Tom Tromey <tromey@redhat.com>
5392 * c-valprint.c (c_value_print): Use value_addr for
5393 references. Convert back to reference type with value_ref.
5395 2013-05-22 Eli Zaretskii <eliz@gnu.org>
5397 * windows-nat.c (handle_unload_dll): Don't call solib_add for the
5398 unloaded DLL, it will be done by handle_solib_event. See
5399 http://sourceware.org/ml/gdb-patches/2013-05/msg00713.html for the
5402 2013-05-22 Phil Muldoon <pmuldoon@redhat.com>
5404 * ui-out.c: Create typedef ui_out_level_p and define vector
5405 operations for that type.
5406 (struct ui_out): Use a vector instead of an array.
5407 (current_level): Return level from a vector.
5408 (push_level): Create a level in a vector.
5409 (pop_level): Delete a level in a vector.
5410 (ui_out_new): Create initial level zero level, and store in a
5412 (ui_out_destroy): Add vector cleanup.
5414 2013-05-22 Pedro Alves <palves@redhat.com>
5416 * python/python-internal.h (gdb_Py_DECREF): Tag with
5417 "ARI: editCase function".
5419 2013-05-21 Paul Pluzhnikov <ppluzhnikov@google.com>
5421 * solib-svr4.c (svr4_free_so): Protect against NULL dereference.
5423 2013-05-21 Pedro Alves <palves@redhat.com>
5425 * python/py-prettyprint.c (apply_val_pretty_printer): Check
5426 whether PRINTER is NULL before installing a Py_DECREF cleanup.
5427 * python/py-utils.c (py_decref): Don't check for NULL before
5430 2013-05-21 Pedro Alves <palves@redhat.com>
5432 * python/py-utils.c (py_decref): Remove extra braces.
5433 (gdb_pymodule_addobject): Remove extra braces.
5434 * python-internal.h (gdb_Py_DECREF): New static inline function.
5435 (Py_DECREF): Redefine as calling gdb_Py_DECREF.
5437 2013-05-21 Philippe Waroquiers <philippe.waroquiers@skynet.be>
5439 * breakpoints.c (detach_breakpoints): Do not
5440 detach breakpoints locations with loc_type bp_loc_other.
5442 2013-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
5444 Workaround Python 2.6.
5445 * python/py-utils.c (gdb_pymodule_addobject): Wrap Py_DECREF into
5448 2013-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
5450 Code cleanup: constification.
5451 * solib.c (solib_ops): Make return type and ops variable type const.
5452 (set_solib_ops): Make the new_ops parameter and ops variable const.
5453 (solib_find, solib_map_sections, clear_so, free_so, update_solib_list)
5454 (solib_add, solib_keep_data_in_core, clear_solib)
5455 (solib_create_inferior_hook, in_solib_dynsym_resolve_code)
5456 (reload_shared_libraries, solib_global_lookup): Make the ops variable
5458 * solib.h (set_solib_ops): Make the new_ops parameter const.
5460 2013-05-21 Joel Brobecker <brobecker@adacore.com>
5462 * data-directory/Makefile.in (SYSTEM_GDBINIT_SRCDIR): New
5464 (VPATH): Add SYSTEM_GDBINIT_SRCDIR.
5465 (SYSTEM_GDBINIT_DIR, SYSTEM_GDBINIT_INSTALL_DIR)
5466 (SYSTEM_GDBINIT_FILES): New variables.
5467 (all): Add stamp-system-gdbinit.
5468 (stamp-system-gdbinit): New rule.
5469 (clean-system-gdbinit, install-system-gdbinit)
5470 (uninstall-system-gdbinit): New rules. Make them .PHONY.
5471 (install-only): Add dependency on install-system-gdbinit.
5472 (uninstall): Add dependency on uninstall-system-gdbinit.
5473 (clean): Add dependency on clean-system-gdbinit.
5474 * system-gdbinit/elinos.py: New file.
5475 * system-gdbinit/wrs-linux.py: New file.
5477 2013-05-21 Joel Brobecker <brobecker@adacore.com>
5479 * ada-lang.c (old_renaming_is_invisible): Fix cleanup leak.
5481 2013-05-21 Hui Zhu <hui@codesourcery.com>
5483 * breakpoint.c (dprintf_breakpoint_ops): Remove its static.
5484 * breakpoint.h (dprintf_breakpoint_ops): Add extern.
5485 * mi/mi-cmd-break.c (ctype.h): New include.
5486 (gdb_obstack.h): New include.
5487 (mi_argv_to_format, mi_cmd_break_insert_1): New.
5488 (mi_cmd_break_insert): Call mi_cmd_break_insert_1.
5489 (mi_cmd_dprintf_insert): New.
5490 * mi/mi-cmds.c (mi_cmds): Add "dprintf-insert".
5491 * mi/mi-cmds.h (mi_cmd_dprintf_insert): New extern.
5493 2013-05-20 Tom Tromey <tromey@redhat.com>
5495 * python/py-prettyprint.c (search_pp_list): Decref 'attr'.
5497 2013-05-20 Tom Tromey <tromey@redhat.com>
5499 * python/py-value.c (valpy_get_dynamic_type): Simplify
5500 dynamic_type assignment. Use Py_XINCREF.
5502 2013-05-20 Tom Tromey <tromey@redhat.com>
5504 * python/py-type.c (typy_fields): Unconditionally decref 'r'.
5506 2013-05-20 Tom Tromey <tromey@redhat.com>
5508 * python/py-frame.c (frapy_older, frapy_newer, gdbpy_newest_frame)
5509 (gdbpy_selected_frame): Move object-construction code
5512 2013-05-20 Tom Tromey <tromey@redhat.com>
5514 * python/py-arch.c (gdbpy_initialize_arch): Use
5515 gdb_pymodule_addobject.
5516 * python/py-block.c (gdbpy_initialize_blocks): Use
5517 gdb_pymodule_addobject.
5518 * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Use
5519 gdb_pymodule_addobject.
5520 * python/py-cmd.c (gdbpy_initialize_breakpoints): Use
5521 gdb_pymodule_addobject.
5522 * python/py-event.c (gdbpy_initialize_event_generic): Use
5523 gdb_pymodule_addobject.
5524 * python/py-evtregistry.c (gdbpy_initialize_eventregistry): Use
5525 gdb_pymodule_addobject.
5526 * python/py-evts.c (add_new_registry): Use
5527 gdb_pymodule_addobject.
5528 (gdbpy_initialize_py_events): Likewise.
5529 * python/py-finishbreakpoint.c
5530 (gdbpy_initialize_finishbreakpoints): Use
5531 gdb_pymodule_addobject.
5532 * python/py-frame.c (gdbpy_initialize_frames): Use
5533 gdb_pymodule_addobject.
5534 * python/py-function.c (gdbpy_initialize_functions): Use
5535 gdb_pymodule_addobject.
5536 * python/py-inferior.c (gdbpy_initialize_inferior): Use
5537 gdb_pymodule_addobject.
5538 * python/py-infthread.c (gdbpy_initialize_thread): Use
5539 gdb_pymodule_addobject.
5540 * python/py-objfile.c (gdbpy_initialize_objfile): Use
5541 gdb_pymodule_addobject.
5542 * python/py-param.c (gdbpy_initialize_parameters): Use
5543 gdb_pymodule_addobject.
5544 * python/py-progspace.c (gdbpy_initialize_pspace): Use
5545 gdb_pymodule_addobject.
5546 * python/py-symbol.c (gdbpy_initialize_symbols): Use
5547 gdb_pymodule_addobject.
5548 * python/py-symtab.c (gdbpy_initialize_symtabs): Use
5549 gdb_pymodule_addobject.
5550 * python/py-type.c (gdbpy_initialize_types): Use
5551 gdb_pymodule_addobject.
5552 * python/py-utils.c (gdb_pymodule_addobject): New function.
5553 * python/py-value.c (gdbpy_initialize_values): Use
5554 gdb_pymodule_addobject.
5555 * python/python-internal.h (gdb_pymodule_addobject): Declare.
5556 * python/python.c (_initialize_python): Use
5557 gdb_pymodule_addobject.
5559 2013-05-20 Tom Tromey <tromey@redhat.com>
5561 * python/py-cmd.c (cmdpy_completer): Use explicit decref.
5562 * python/py-param.c (get_set_value, get_show_value): Use
5564 * python/python.c (start_type_printers, apply_type_printers):
5565 Use explicit decrefs.
5567 2013-05-20 Tom Tromey <tromey@redhat.com>
5569 * python/py-evts.c (gdbpy_initialize_py_events): Don't
5572 2013-05-20 Tom Tromey <tromey@redhat.com>
5574 * python/python.c (gdbpy_run_events): Decref the result
5575 of PyObject_CallObject.
5577 2013-05-20 Tom Tromey <tromey@redhat.com>
5579 * python/py-symtab.c (set_sal): Use
5580 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION. Return -1 on error.
5581 (symtab_and_line_to_sal_object): Update.
5583 2013-05-20 Tom Tromey <tromey@redhat.com>
5585 * python/py-param.c (compute_enum_values): Decref 'item'.
5587 2013-05-20 Tom Tromey <tromey@redhat.com>
5589 * mi/mi-main.c: Include python-internal.h.
5590 (mi_cmd_list_features): Check gdb_python_initialized.
5591 * python/py-inferior.c (python_on_normal_stop, python_on_resume)
5592 (python_inferior_exit, python_new_objfile, add_thread_object)
5593 (delete_thread_object, py_free_inferior): Check
5594 gdb_python_initialized.
5595 * python/py-prettyprint.c (apply_val_pretty_printer): Check
5596 gdb_python_initialized.
5597 * python/py-type.c (save_objfile_types): Check
5598 gdb_python_initialized.
5599 * python/python-internal.h (gdb_python_initialized): Declare.
5600 * python/python.c (ensure_python_env): Throw exception if
5601 Python not initialized.
5602 (before_prompt_hook, source_python_script_for_objfile)
5603 (start_type_printers, apply_type_printers,
5604 free_type_printers): Check gdb_python_initialized.
5605 * varobj.c (varobj_get_display_hint)
5606 (dynamic_varobj_has_child_method, update_dynamic_varobj_children)
5607 (install_new_value_visualizer, varobj_set_visualizer)
5608 (value_get_print_value): Check gdb_python_initialized.
5610 2013-05-20 Tom Tromey <tromey@redhat.com>
5612 * python/py-arch.c (gdbpy_initialize_arch): Return 'int'.
5614 * python/py-auto-load.c (gdbpy_initialize_auto_load): Return 'int'.
5615 * python/py-block.c (gdbpy_initialize_blocks): Return 'int'.
5617 * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Return 'int'.
5619 * python/py-cmd.c (gdbpy_initialize_commands): Return 'int'.
5621 * python/py-event.c (gdbpy_initialize_event): Return 'int'.
5623 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Change generated
5624 init function to return 'int'.
5625 * python/py-evtregistry.c (gdbpy_initialize_eventregistry):
5626 Return 'int'. Check errors.
5627 * python/py-evts.c (gdbpy_initialize_py_events): Return 'int'.
5629 * python/py-finishbreakpoint.c (gdbpy_initialize_finishbreakpoints):
5630 Return 'int'. Check errors.
5631 * python/py-frame.c (gdbpy_initialize_frames): Return 'int'.
5633 * python/py-function.c (gdbpy_initialize_functions): Return 'int'.
5635 * python/py-gdb-readline.c (gdbpy_initialize_gdb_readline):
5637 * python/py-inferior.c (gdbpy_initialize_inferior): Return 'int'.
5639 * python/py-infthread.c (gdbpy_initialize_thread): Return 'int'.
5641 * python/py-lazy-string.c (gdbpy_initialize_lazy_string): Return 'int'.
5643 * python/py-objfile.c (gdbpy_initialize_objfile): Return 'int'.
5645 * python/py-param.c (gdbpy_initialize_parameters): Return 'int'.
5647 * python/py-progspace.c (gdbpy_initialize_pspace): Return 'int'.
5649 * python/py-symbol.c (gdbpy_initialize_symbols): Return 'int'.
5651 * python/py-symtab.c (gdbpy_initialize_symtabs): Return 'int'.
5653 * python/py-type.c (gdbpy_initialize_types): Return 'int'.
5655 * python/py-value.c (gdbpy_initialize_values): Return 'int'.
5657 * python/python-internal.h (gdbpy_initialize_auto_load,
5658 gdbpy_initialize_values, gdbpy_initialize_frames,
5659 gdbpy_initialize_symtabs, gdbpy_initialize_commands,
5660 gdbpy_initialize_symbols, gdbpy_initialize_symtabs,
5661 gdbpy_initialize_blocks, gdbpy_initialize_types,
5662 gdbpy_initialize_functions, gdbpy_initialize_pspace,
5663 gdbpy_initialize_objfile, gdbpy_initialize_breakpoints,
5664 gdbpy_initialize_finishbreakpoints,
5665 gdbpy_initialize_lazy_string, gdbpy_initialize_parameters,
5666 gdbpy_initialize_thread, gdbpy_initialize_inferior,
5667 gdbpy_initialize_eventregistry, gdbpy_initialize_event,
5668 gdbpy_initialize_py_events, gdbpy_initialize_stop_event,
5669 gdbpy_initialize_signal_event,
5670 gdbpy_initialize_breakpoint_event,
5671 gdbpy_initialize_continue_event,
5672 gdbpy_initialize_exited_event, gdbpy_initialize_thread_event,
5673 gdbpy_initialize_new_objfile_event, gdbpy_initialize_arch):
5674 Update. Use CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5675 * python/python.c (gdb_python_initialized): New global.
5676 (gdbpy_initialize_events): Return 'int'. Check errors.
5677 (_initialize_python): Check errors. Set
5678 gdb_python_initialized.
5680 2013-05-20 Tom Tromey <tromey@redhat.com>
5682 * python/py-finishbreakpoint.c (bpfinishpy_out_of_scope):
5683 Decref the reslut of PyObject_CallMethod.
5685 2013-05-20 Tom Tromey <tromey@redhat.com>
5687 * python/py-event.c (gdbpy_initialize_event_generic): Return
5688 early if PyType_Ready fails.
5690 2013-05-20 Tom Tromey <tromey@redhat.com>
5692 * python/py-type.c (make_fielditem): Add gdb_assert_not_reached
5693 as 'default' in the switch.
5695 2013-05-20 Tom Tromey <tromey@redhat.com>
5697 * python/py-inferior.c (gdbpy_inferiors): Update. Hoist
5698 get_addr_from_python calls out of TRY_CATCH.
5699 (infpy_write_memory, infpy_search_memory): Likewise.
5700 * python/py-utils.c (get_addr_from_python): Return negative
5701 value on error. Use TRY_CATCH.
5702 * python/python-internal.h (get_addr_from_python): Use
5703 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5705 2013-05-20 Tom Tromey <tromey@redhat.com>
5707 * python/py-event.c (evpy_emit_event): Decref the
5708 result of PyObject_CallFunctionObjArgs.
5710 2013-05-20 Tom Tromey <tromey@redhat.com>
5712 * python/py-cmd.c (cmdpy_completer): Use iterator protocol.
5715 2013-05-20 Tom Tromey <tromey@redhat.com>
5717 * python/py-cmd.c (cmdpy_init): Decref 'ds_obj'.
5719 2013-05-20 Tom Tromey <tromey@redhat.com>
5721 * python/py-event.h (gdbpy_initialize_event_generic): Use
5722 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5723 * python/py-evts.c (add_new_registry): Use
5724 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5725 * python/python-internal.h
5726 (CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION): New macro.
5728 2013-05-20 Tom Tromey <tromey@redhat.com>
5730 * python/py-arch.c (archpy_disassemble): Update.
5731 * python/py-type.c (typy_get_composite, typy_lookup_typename)
5732 (typy_lookup_type): Use GDB_PY_HANDLE_EXCEPTION.
5733 * python/py-utils.c (gdbpy_convert_exception): Return 'void'.
5734 * python/python-internal.h (CPYCHECKER_SETS_EXCEPTION): New
5736 (GDB_PY_HANDLE_EXCEPTION): Update.
5737 (gdbpy_convert_exception): Update. Use CPYCHECKER_SETS_EXCEPTION.
5739 2013-05-20 Tom Tromey <tromey@redhat.com>
5741 * python/python-internal.h (events_object_type): Remove.
5743 2013-05-20 Tom Tromey <tromey@redhat.com>
5745 * python/py-event.h (evpy_emit_event): Use
5746 CPYCHECKER_STEALS_REFERENCE_TO_ARG.
5747 * python/python-internal.h (CPYCHECKER_STEALS_REFERENCE_TO_ARG):
5750 2013-05-20 Tom Tromey <tromey@redhat.com>
5752 * py-evtregistry.c (create_event_object): Decref
5753 eventregistry_object if PyList_New fails.
5755 2013-05-20 Tom Tromey <tromey@redhat.com>
5757 * py-cmd.c (gdbpy_string_to_argv): Check result of
5760 2013-05-20 Tom Tromey <tromey@redhat.com>
5762 * python/python.c (before_prompt_hook): Add cleanup to
5765 2013-05-20 Tom Tromey <tromey@redhat.com>
5767 * python/py-function.c (fnpy_init): Decref result of
5768 PyObject_GetAttrString.
5770 2013-05-20 Tom Tromey <tromey@redhat.com>
5772 * python/py-threadevent.c (get_event_thread): Use
5773 CPYCHECKER_RETURNS_BORROWED_REF.
5774 * python/python-internal.h (CPYCHECKER_RETURNS_BORROWED_REF):
5776 (pspace_to_pspace_object, objfile_to_objfile_object)
5777 (find_thread_object): Use it.
5779 2013-05-20 Tom Tromey <tromey@redhat.com>
5781 * python/py-arch.c (arch_object_type): Use
5782 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5783 * python/py-block.c (block_syms_iterator_object_type):
5784 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5785 * python/py-bpevent.c (breakpoint_event_object_type):
5786 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5787 * python/py-cmd.c (cmdpy_object_type): Use
5788 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5789 * python/py-continueevent.c (continue_event_object_type):
5790 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5791 * python/py-event.h (GDBPY_NEW_EVENT_TYPE):
5792 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5793 * python/py-events.h (thread_event_object_type):
5794 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5795 * python/py-evtregistry.c (eventregistry_object_type): Use
5796 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5797 * python/py-exitedevent.c (exited_event_object_type):
5798 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5799 * python/py-finishbreakpoint.c (finish_breakpoint_object_type):
5800 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5801 * python/py-function.c (fnpy_object_type): Use
5802 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5803 * python/py-inferior.c (inferior_object_type, membuf_object_type):
5804 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5805 * python/py-infthread.c (thread_object_type): Use
5806 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5807 * python/py-lazy-string.c (lazy_string_object_type):
5808 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5809 * python/py-newobjfileevent.c (new_objfile_event_object_type):
5810 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5811 * python/py-objfile.c (objfile_object_type): Use
5812 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5813 * python/py-param.c (parmpy_object_type):
5814 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5815 * python/py-progspace.c (pspace_object_type):
5816 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5817 * python/py-signalevent.c (signal_event_object_type):
5818 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5819 * python/py-symtab.c (symtab_object_type, sal_object_type): Use
5820 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5821 * python/py-type.c (type_object_type, field_object_type)
5822 (type_iterator_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5823 * python/py-internal.h (CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF): New
5825 (value_object_type, block_object_type, symbol_object_type)
5826 (event_object_type, stop_event_object_type, breakpoint_object_type)
5827 (frame_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5829 2013-05-20 Andreas Tobler <andreas@fgznet.ch>
5831 * Makefile.in (ALL_TARGET_OBS): Add ppcfbsd-tdep.o.
5832 (ALLDEPFILES): Add ppcfbsd-nat.c and ppcfbsd-tdep.c.
5834 2013-05-20 Doug Evans <dje@google.com>
5836 When reading CU, stay in DWO. Be more tolerent of bad debug info.
5838 * dwarf2read.c (struct dwarf2_per_cu_data): New member
5839 reading_dwo_directly.
5840 (struct signatured_type): New member dwo_unit.
5841 (struct die_reader_specs): New member comp_dir.
5842 (create_signatured_type_table_from_index): Use malloc for
5843 all_type_units instead of objfile's obstack.
5844 (create_all_type_units): Ditto.
5845 (fill_in_sig_entry_from_dwo_entry): New function.
5846 (add_type_unit): New function.
5847 (lookup_dwo_signatured_type): New function.
5848 (lookup_dwp_signatured_type): New function.
5849 (lookup_signatured_type): New arg cu. All callers updated.
5850 (init_cu_die_reader): Initialize comp_dir.
5851 (read_cutu_die_from_dwo): New arg stub_comp_dir. All callers updated.
5852 Change assert of matching type signatures to call error on mismatch.
5853 (lookup_dwo_unit): Add assert.
5854 (init_tu_and_read_dwo_dies): New function.
5855 (init_cutu_and_read_dies): Call it.
5856 (build_type_unit_groups): Handle case of no type unit groups created.
5857 (hash_dwo_file, eq_dwo_file): Handle missing comp_dir.
5858 (lookup_dwo_cutu): Tweak complaint.
5859 (dwarf2_free_abbrev_table): Check for NULL abbrev_table.
5860 (dwarf2_per_objfile_free): Free all_type_units.
5862 2013-05-20 Joel Brobecker <brobecker@adacore.com>
5864 * windows-nat.c (handle_unload_dll): Add missing empty line.
5866 2013-05-20 Joel Brobecker <brobecker@adacore.com>
5868 * dwarf2read.c (prototyped_function_p): New function.
5869 (read_subroutine_type): Use it.
5871 2013-05-20 Joel Brobecker <brobecker@adacore.com>
5873 * rs6000-aix-tdep.c: De-indent some example code provided
5876 2013-05-17 Edjunior Machado <emachado@linux.vnet.ibm.com>
5878 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Check if the
5879 region is ok for a hardware watchpoint using the new ptrace interface
5882 2013-05-17 Doug Evans <dje@google.com>
5884 * NEWS: Mention new maintenance commands check-symtabs, and
5885 expand-symtabs, and renamed check-psymtabs.
5886 * psymtab.c (maintenance_check_psymtabs): Renamed from
5887 maintenance_check_symtabs. Only process already-expanded symbol
5889 (_initialize_psymtab): Update.
5890 * symmisc.c (maintenance_check_symtabs): New function.
5891 (maintenance_expand_name_matcher): New function
5892 (maintenance_expand_file_matcher): New function
5893 (maintenance_expand_symtabs): New function.
5894 (_initialize_symmisc): Add "mt check-symtabs" and "mt expand-symtabs"
5897 2013-05-17 Tom Tromey <tromey@redhat.com>
5899 * python/py-inferior.c (infpy_read_memory): Don't call
5900 PyErr_SetString if PyObject_New fails.
5901 * python/py-frame.c (frame_info_to_frame_object): Don't call
5902 PyErr_SetString if PyObject_New fails.
5904 2013-05-17 Pavel Chupin <pavel.v.chupin@intel.com>
5906 * acinclude.m4: Add check for dlopen in libdl.
5907 * configure.ac: Ditto.
5908 * configure: Regenerate.
5910 2013-05-17 Phil Muldoon <pmuldoon@redhat.com>
5912 * frame.c (frame_stash): Convert to htab.
5913 (frame_addr_hash): New function.
5914 (frame_addr_hash_eq): New function.
5915 (frame_stash_create): Convert function to create
5917 (frame_stash_add): Convert function to add an entry to a hash
5919 (frame_stash_find): Convert function to search the hash table.
5920 (frame_stash_invalidate): Convert function to empty the hash
5922 (get_frame_id): Only add to stash if a frame_id is created.
5923 (_initialize_frame): Call frame_stash_create.
5925 2013-05-16 Yue Lu <hacklu.newborn@gmail.com> (tiny change)
5927 * configure.ac: Ensure MIG is available when building for GNU Hurd
5929 * configure: Regenerate.
5931 2013-05-16 Joel Brobecker <brobecker@adacore.com>
5933 * dwarf2read.c (set_cu_language): Add DW_LANG_UPC handling.
5935 2013-05-16 Joel Brobecker <brobecker@adacore.com>
5937 * ada-lang.c (ada_make_symbol_completion_list): Make sure
5938 all cleanups are done before returning from this function.
5940 2013-05-15 Joel Brobecker <brobecker@adacore.com>
5942 * utils.h: #include "exceptions.h".
5943 (enum errors): Remove partial declaration.
5945 2013-05-15 Joel Brobecker <brobecker@adacore.com>
5947 * gdbarch.sh (core_xfer_shared_libraries_aix): New method.
5948 * gdbarch.h, gdbarch.c: Regenerate.
5949 * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX
5952 * rs6000-aix-tdep.h: New file.
5953 * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h.
5954 * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and
5956 (struct field_info, struct ld_info_desc): New types.
5957 (ld_info32_desc, ld_info64_desc): New static constants.
5958 (struct ld_info): New type.
5959 (rs6000_aix_extract_ld_info): New function.
5960 (rs6000_aix_shared_library_to_xml): Likewise.
5961 (rs6000_aix_ld_info_to_xml): Likewise.
5962 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
5963 (rs6000_aix_init_osabi): Add call to
5964 set_gdbarch_core_xfer_shared_libraries_aix.
5965 * rs6000-nat.c: Add "rs6000-aix-tdep.h" include.
5966 Remove "xml-utils.h" include.
5967 (LdInfo): Delete typedef.
5968 (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME):
5970 (rs6000_ptrace_ldinfo): Change return type to gdb_byte *.
5971 Adjust code accordingly.
5972 (rs6000_core_ldinfo): Delete, folded into
5973 rs6000_aix_core_xfer_shared_libraries_aix.
5974 (rs6000_xfer_shared_library): Delete.
5975 (rs6000_xfer_shared_libraries): Reimplement.
5977 2013-05-15 Markus Metzger <markus.t.metzger@intel.com>
5979 * record.c (record_goto_cmdlist): New.
5980 (cmd_record_goto): Split into this ...
5981 (cmd_record_goto_begin): ... this
5982 (cmd_record_goto_end): ... and this.
5983 (_initialize_record): Change "record goto" to prefix command.
5984 Add commands for "record goto begin" and "record goto end".
5985 Add an alias for "record goto start" to "record goto begin".
5987 2013-05-14 Jan Kratochvil <jan.kratochvil@redhat.com>
5989 * linespec.c (convert_linespec_to_sals): New comment for
5990 SOURCE_FILENAME assignment.
5992 2013-05-14 Jan Kratochvil <jan.kratochvil@redhat.com>
5994 * cleanups.c (restore_my_cleanups): Replace gdb_assert by
5997 2013-05-14 Tom Tromey <tromey@redhat.com>
5999 * eval.c (parse_and_eval_long): Make 'exp' const.
6000 * value.h (parse_and_eval_long): Update.
6002 2013-05-14 Tom Tromey <tromey@redhat.com>
6004 * ui-file.c (gdb_fopen): Make arguments const.
6005 * ui-file.h (gdb_fopen): Make arguments const.
6007 2013-05-14 Tom Tromey <tromey@redhat.com>
6009 * remote.c (remote_set_trace_notes): Make arguments const.
6010 * target.c (update_current_target): Update cast.
6011 * target.h (to_set_trace_notes): Make arguments const.
6013 2013-05-14 Tom Tromey <tromey@redhat.com>
6015 * go32-nat.c (go32_terminal_info): Make 'args' const.
6016 * inferior.h (child_terminal_info): Update.
6017 * inflow.c (child_terminal_info): Make 'args' const.
6018 * target.c (default_terminal_info): Make 'args' const.
6019 (debug_to_terminal_save_ours): Likewise.
6020 * target.h (struct target_ops) <to_terminal_info>: Make argument
6023 2013-05-13 Tom Tromey <tromey@redhat.com>
6025 * gcore.c (create_gcore_bfd): Make 'filename' const.
6026 * gcore.h (create_gcore_bfd): Make 'filename' const.
6027 * record-full.c (record_full_save): Make 'recfilename' const.
6028 * target.c (target_save_record): Make 'filename' const.
6029 * target.h (struct target_ops) <to_save_record>: Make 'filename'
6031 (target_save_record): Likewise.
6033 2013-05-13 Tom Tromey <tromey@redhat.com>
6036 * dwarf2read.c (dwarf2_record_block_ranges): Ensure that the
6037 ranges section has been read.
6039 2013-05-13 Tom Tromey <tromey@redhat.com>
6042 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
6043 STRUCTOP_PTR>: Return a not_lval value for
6044 EVAL_AVOID_SIDE_EFFECTS.
6045 * opencl-lang.c (evaluate_subexp_opencl): Return a not_lval value
6046 for EVAL_AVOID_SIDE_EFFECTS.
6048 2013-05-13 Joel Brobecker <brobecker@adacore.com>
6050 * rs6000-aix-tdep.c (rs6000_push_dummy_call): Convert
6051 floating point registers to register type before storing
6053 * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call):
6056 2013-05-10 Joel Brobecker <brobecker@adacore.com>
6057 Tom Tromey <tromey@redhat.com>
6059 * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
6061 * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
6063 * darwin-nat.c (darwin_pre_ptrace): Use mark_fd_no_cloexec.
6064 (darwin_ptrace_him): Use unmark_fd_no_cloexec.
6065 * inf-ttrace.c (do_cleanup_pfds): Use unmark_fd_no_cloexec.
6066 (inf_ttrace_prepare): Use mark_fd_no_cloexec.
6068 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
6069 Tom Tromey <tromey@redhat.com>
6072 * configure: Rebuild.
6073 * configure.ac (build_warnings): Do not use -Wformat-nonliteral
6076 2013-05-10 Pedro Alves <palves@redhat.com>
6078 * remote.c (_initialize_remote): Fix spelling of
6079 qXfer:traceframe-info:read packet in packet config command.
6081 2013-05-10 David Taylor <dtaylor@emc.com>
6085 * remote.c (remote_trace_set_readonly_regions): Do not overwrite
6086 "QTro" at start of packet.
6088 2013-05-10 Joel Brobecker <brobecker@adacore.com>
6090 * solib-aix.c (solib_aix_relocate_section_addresses):
6091 For the .bss section action, apply the same offset as
6094 2013-05-10 Joel Brobecker <brobecker@adacore.com>
6096 * solib-aix.c (solib_aix_relocate_section_addresses):
6097 Remove FIXME comment.
6099 2013-05-10 Joel Brobecker <brobecker@adacore.com>
6102 * sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
6103 New functions, directly copied from sparc-sol-thread.c.
6104 * sparc-sol-thread.c: Delete.
6105 * configure.ac: Remove code handling sparc-solaris-thread.c.
6106 * configure: Regenerate.
6108 2013-05-10 Phil Muldoon <pmuldoon@redhat.com>
6110 * stack.c (backtrace_command_1): Add "no-filters", and Python frame
6112 (backtrace_command): Add "no-filters" option parsing.
6113 (_initialize_stack): Alter help to reflect "no-filters" option.
6114 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-framefilter.o
6115 (SUBDIR_PYTHON_SRCS): Add py-framefilter.c
6116 (py-frame.o): Add target
6117 * data-directory/Makefile.in (PYTHON_DIR): Add Python frame
6119 * python/python.h: Add new frame filter constants, and flag enum.
6120 (apply_frame_filter): Add definition.
6121 * python/python.c (apply_frame_filter): New non-Python
6123 * python/py-utils.c (py_xdecref): New function.
6124 (make_cleanup_py_xdecref): Ditto.
6125 * python/py-objfile.c: Declare frame_filters dictionary.
6126 (objfpy_dealloc): Add frame_filters dealloc.
6127 (objfpy_new): Initialize frame_filters attribute.
6128 (objfile_to_objfile_object): Ditto.
6129 (objfpy_get_frame_filters): New function.
6130 (objfpy_set_frame_filters): New function.
6131 * python/py-progspace.c: Declare frame_filters dictionary.
6132 (pspy_dealloc): Add frame_filters dealloc.
6133 (pspy_new): Initialize frame_filters attribute.
6134 (pspacee_to_pspace_object): Ditto.
6135 (pspy_get_frame_filters): New function.
6136 (pspy_set_frame_filters): New function.
6137 * python/py-framefilter.c: New file.
6138 * python/lib/gdb/command/frame_filters.py: New file.
6139 * python/lib/gdb/frames.py: New file.
6140 * python/lib/gdb/__init__.py: Initialize global frame_filters
6142 * python/lib/gdb/FrameDecorator.py: New file.
6143 * python/lib/gdb/FrameIterator.py: New file.
6144 * mi/mi-cmds.c (mi_cmds): Add frame filters command.
6145 * mi/mi-cmds.h: Declare.
6146 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Add
6147 --no-frame-filter logic, and Python frame filter logic.
6148 (stack_enable_frame_filters): New function.
6149 (parse_no_frame_option): Ditto.
6150 (mi_cmd_stack_list_frames): Add --no-frame-filter and Python frame
6152 (mi_cmd_stack_list_locals): Ditto.
6153 (mi_cmd_stack_list_args): Ditto.
6154 (mi_cmd_stack_list_variables): Ditto.
6155 * NEWS: Add frame filter note.
6157 2013-05-09 Doug Evans <dje@google.com>
6159 * symfile.c (syms_from_objfile_1): Delete args offsets, num_offsets.
6160 All callers updated.
6161 (syms_from_objfile): Ditto. Make static.
6162 (symbol_file_add_with_addrs): Renamed from
6163 symbol_file_add_with_addrs_or_offsets. Delete args offsets,
6164 num_offsets. All callers updated.
6165 * symfile.h (syms_from_objfile): Delete.
6167 * symfile.c (decrement_reading_symtab): Add assert.
6168 (increment_reading_symtab): Ditto.
6170 2013-05-09 Joel Brobecker <brobecker@adacore.com>
6172 * source.c (forward_search_command): Replace call to getc
6174 (reverse_search_command): Likewise.
6176 2013-05-08 Doug Evans <dje@google.com>
6178 * psymtab.c (expand_symtabs_matching_via_partial): Fix file name
6181 2013-05-08 Joel Brobecker <brobecker@adacore.com>
6183 * sol-thread.c (info_cb): Factorize the code a little.
6185 2013-05-08 Joel Brobecker <brobecker@adacore.com>
6187 * sol-thread.c (info_cb): Rework the output of the "maintenance
6188 info sol-threads" command a bit.
6190 2013-05-08 Joel Brobecker <brobecker@adacore.com>
6192 * sol-thread.c (info_cb) [ti.ti_state == TD_THR_SLEEP]:
6193 Replace ti.ti_startfunc by ti.ti_pc.
6195 2013-05-08 Joel Brobecker <brobecker@adacore.com>
6197 * solib-aix.c (solib_aix_free_library_list): New function
6198 for the case where HAVE_LIBEXPAT is not defined.
6200 2013-05-07 Sergio Durigan Junior <sergiodj@redhat.com>
6202 PR breakpoints/15413:
6203 * breakpoint.c (condition_completer): Simplify the code to
6204 disconsider multiple locations of breakpoints when completing the
6205 "condition" command.
6207 2013-05-07 Pierre Muller <muller@sourceware.org>
6209 * common/linux-btrace.c: ARI fix: Include "gdb_wait.h"
6210 instead of <sys/wait.h>.
6212 2013-05-07 Pierre Muller <muller@sourceware.org>
6214 * nios2-tdep.c (nios2_dwarf_reg_to_regnum): ARI fix: remove
6215 trailing new line from warning message.
6217 2013-05-07 Pierre Muller <muller@sourceware.org>
6219 * contrib/ari/gdb_ari.sh (SOLIB_ADD, SOLIB_CREATE_INFERIOR_HOOK)
6220 (PC_SOLIB): Change type from ari_deprecate to ari_regression.
6222 2013-05-07 Joel Brobecker <brobecker@adacore.com>
6224 * rs6000-nat.c (rs6000_core_ldinfo): Remove '\n' at end of
6225 error message (ARI fix).
6227 2013-05-07 Joel Brobecker <brobecker@adacore.com>
6229 * features/library-list-aix.dtd: Replace library-list by
6231 * rs6000-nat.c: Replace library-list by library-list-aix
6233 * solib-aix.c: Likewise.
6235 2013-05-07 Joel Brobecker <brobecker@adacore.com>
6237 * target.h (enum target_object) [TARGET_OBJECT_LIBRARIES_AIX]:
6238 Renames TARGET_OBJECT_AIX_LIBRARIES.
6239 * rs6000-nat.c: Replace TARGET_OBJECT_AIX_LIBRARIES with
6240 TARGET_OBJECT_LIBRARIES_AIX throughout.
6241 * solib-aix.c: Likwise.
6243 2013-05-07 Yao Qi <yao@codesourcery.com>
6245 * solib-dsbt.c (struct dsbt_info) <enable_break2_done>: Remove.
6246 (get_dsbt_info, enable_break, dsbt_clear_solib): Update.
6248 2013-05-07 Yao Qi <yao@codesourcery.com>
6250 * solib-dsbt.c (enable_break): Declare.
6251 (dsbt_current_sos): Remove call to enable_break2.
6252 (enable_break2): Rename to enable_break. Set solib breakpoint
6253 on '_dl_debug_state'.
6254 (enable_break): Remove.
6256 2013-05-07 Luis Machado <lgustavo@codesourcery.com>
6258 * ppc-linux-nat.c (ppc_linux_new_thread): Clear the new thread's
6259 debug state prior to replicating existing hardware watchpoints or
6262 2013-05-07 Jan Kratochvil <jan.kratochvil@redhat.com>
6264 * gcore.c (gcore_create_callback): Ignore sections with
6265 separate_debug_objfile_backlink != NULL.
6267 2013-05-06 Sandra Loosemore <sandra@codesourcery.com>
6268 Andrew Jenner <andrew@codesourcery.com>
6269 Chung-Lin Tang <cltang@codesourcery.com>
6270 Julian Brown <julian@codesourcery.com>
6272 Based on the nios2-elf port from Altera Corporation.
6274 * Makefile.in (ALL_TARGET_OBS): Add nios2-tdep.o and
6276 (HFILES_NO_SRCDIR): Add nios2-tdep.h.
6277 (ALLDEPFILES): Add nios2-tdep.c and nios2-linux-tdep.c.
6278 * configure.tgt: Add nios2*-*-linux* and nios2*-*-* targets.
6279 * nios2-tdep.h: New.
6280 * nios2-tdep.c: New.
6281 * nios2-linux-tdep.c: New.
6282 * features/Makefile (WHICH): Add nios2-linux.
6283 (nios2-linux-expedite): Set.
6284 * features/nios2-cpu.xml: New.
6285 * features/nios2.xml: New.
6286 * features/nios2-linux.xml: New.
6287 * features/nios2.c: New (autogenerated).
6288 * features/nios2-linux.c: New (autogenerated).
6289 * regformats/nios2-linux.dat: New (autogenerated).
6290 * NEWS (Changes since GDB 7.6): Add new Nios II targets
6293 2013-05-06 Doug Evans <dje@google.com>
6295 * symfile.c: Whitespace cleanup.
6297 * solist.h (struct target_so_ops): New member clear_so.
6298 * solib-svr4.c (svr4_clear_so): New function.
6299 (_initialize_svr4_solib): Set svr4_so_ops.clear_so.
6300 * solib.c (clear_so): Renamed from free_so_symbols.
6301 All callers updated. Call target clear_so if it exists.
6303 2013-05-06 Tom Tromey <tromey@redhat.com>
6305 * ada-lang.c (ada_value_primitive_packed_val): Don't
6307 * value.c (set_value_parent): Incref the new parent and decref
6309 (value_copy, value_primitive_field): Use set_value_parent.
6311 2013-05-06 Tom Tromey <tromey@redhat.com>
6313 * dwarf2loc.c (invalid_synthetic_pointer): Move earlier.
6314 (indirect_pieced_value): Call dwarf2_fetch_constant_bytes
6316 * dwarf2loc.h (dwarf2_fetch_constant_bytes): Declare.
6317 * dwarf2read.c (write_constant_as_bytes)
6318 (dwarf2_fetch_constant_bytes): New functions.
6320 2013-05-06 Tom Tromey <tromey@redhat.com>
6322 * dwarf2read.c (dwarf2_const_value_data): Remove unused
6324 (dwarf2_const_value_attr): Update.
6326 2013-05-06 Tom Tromey <tromey@redhat.com>
6328 * somread.c (som_symfile_offsets): Add 'const' to addrs.
6329 * machoread.c (macho_symfile_offsets): Add 'const' to addrs.
6330 * xcoffread.c (xcoff_symfile_offsets): Add 'const' to addrs.
6333 2013-05-06 Tom Tromey <tromey@redhat.com>
6335 * dwarf2read.c (dwarf2_const_value_attr): Use 'obstack', not
6338 2013-05-06 Doug Evans <dje@google.com>
6340 * dbxread.c (process_one_symbol): Constify section_offsets parameter.
6341 * stabsread.h (process_one_symbol): Update declaration.
6342 * dwarf2read.c (dw2_relocate): Constify new_offsets, delta parameters.
6343 * elfread.c (elf_symfile_relocate_probe): Ditto.
6344 * psymtab.c (relocate_psymtabs): Ditto.
6345 * objfiles.c (objfile_relocate1): Constify new_offsets parameter.
6346 (objfile_relocate): Ditto.
6347 * objfiles.h (objfile_relocate): Update declaration.
6348 * symfile.c (relative_addr_info_to_section_offsets): Constify
6350 (default_symfile_offsets): Ditto.
6351 (syms_from_objfile_1): Constify offsets parameter.
6352 (syms_from_objfile): Ditto.
6353 (symbol_file_add_with_addrs_or_offsets): Ditto.
6354 (symfile_map_offsets_to_segments): Constify data parameter.
6355 * symfile.h (struct quick_symbol_functions): Constify new_offsets,
6356 delta parameters of member relocate.
6357 (struct sym_probe_fns): Constify new_offsets,
6358 delta parameters of member sym_relocate_probe.
6359 (struct sym_fns): Constify section_addr_info parameter of member
6361 (relative_addr_info_to_section_offsets): Update declaration.
6362 (default_symfile_offsets): Ditto.
6363 (syms_from_objfile): Ditto.
6364 (symfile_map_offsets_to_segments): Ditto.
6366 * symfile.c (syms_from_objfile_1): Use correct section count when
6367 objfile->sf == NULL.
6369 2013-05-06 Mike Frysinger <vapier@gentoo.org>
6371 * common/linux-btrace.c (intel_supports_btrace): Fix indentation.
6373 2013-05-06 Doug Evans <dje@google.com>
6375 * psympriv.h (struct partial_symtab): Augment comment for member
6378 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6380 Reimplement shared library support on ppc-aix...
6381 * target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
6382 * features/library-list-aix.dtd: New file.
6383 * solib-aix.h, solib-aix.c: New file.
6384 * rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
6385 (rs6000_find_toc_address_hook): Delete.
6386 (rs6000_push_dummy_call): Rewrite code setting the TOC value.
6387 (rs6000_aix_init_osabi): Register solib_aix_so_ops.
6388 * rs6000-nat.c: Remove "xcoffsolib.h" include. Include
6390 (map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
6391 (vmap_symtab, fixup_breakpoints): Delete.
6392 (rs6000_xfer_shared_libraries): New function.
6393 (rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
6394 (vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
6395 (xcoff_relocate_symtab, xcoff_relocate_core): Delete.
6396 (rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
6397 (rs6000_xfer_shared_library): New function.
6398 (find_toc_address): Delete.
6399 (_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
6400 * rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
6401 * xcoffread.c (record_minimal_symbol): Reloate symbol address
6402 before creating minimal symbol. Adjust function description
6404 (scan_xcoff_symtab): Replace call to
6405 prim_record_minimal_symbol_and_info by call to
6406 record_minimal_symbol.
6407 (xcoff_symfile_offsets): Reimplement mostly as a wrapper
6408 around default_symfile_offsets.
6409 * configure.tgt: Add solib-aix.o to gdb_target_obs for
6410 powerpc-aix targets.
6411 * config/rs6000/nm-rs6000.h: Delete.
6412 * config/powerpc/aix.mh (NAT_FILE): Delete.
6413 (NATDEPFILES): Remove xcoffsolib.o.
6414 * Makefile.in (XMLFILES): Add library-list-aix.dtd.
6415 (ALL_TARGET_OBS): Add solib-aix.o.
6416 (HFILES_NO_SRCDIR): Remove xcoffsolib.h and
6417 config/rs6000/nm-rs6000.h. Add solib-aix.h.
6418 (ALLDEPFILES): Add solib-aix.c. Remove xcoffsolib.c.
6419 * xcoffsolib.h, xcoffsolib.c: Delete.
6421 * solib.c (reload_shared_libraries): Remove reference to
6422 SOLIB_CREATE_INFERIOR_HOOK.
6423 * breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
6424 (disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
6425 (momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
6427 * corelow.c (deprecated_core_resize_section_table): Delete.
6428 * exec.c: Remove include of xcoffsolib.h".
6429 (map_vmap, vmap): Delete.
6430 (exec_close_1): Remove references to vmap.
6431 (exec_file_attach): Remove vmap handling code, and reference
6432 to DEPRECATED_IBM6000_TARGET.
6433 (bfdsec_to_vmap): Delete.
6434 (exec_files_info): Remove block of code handling VMAP.
6435 * infcmd.c (post_create_inferior): Remove reference to
6436 SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
6437 * infrun.c (follow_exec): Remove reference to
6438 SOLIB_CREATE_INFERIOR_HOOK.
6439 * stack.c (print_frame): Remove reference to PC_SOLIB.
6440 * solib-dsbt.c (dsbt_current_sos): Adjust comment.
6441 (dsbt_relocate_main_executable): Likewise.
6442 * solib-frv.c (frv_current_sos): Likewise.
6444 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6446 * sol-thread.c (rw_common): Cast BUF to "gdb_byte *" in calls
6447 to target_write_memory and target_read_memory.
6449 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6451 * darwin-nat.c (darwin_setup_fake_stop_event): New function.
6452 (darwin_attach): Adjust using darwin_setup_fake_stop_event.
6454 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6456 * darwin-nat.c: Replace all "%x" instances in format strings
6457 into "0x%x" throughout.
6459 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6461 * darwin-nat.c (darwin_mourn_inferior): Replace call to
6462 gdb_assert by call to MACH_CHECK_ERROR.
6463 (darwin_attach_pid): Raise an error rather than a failed
6464 assertion when various system calls failed. Report a warning
6465 instead of raising a failed assertion when PREV_NOT is not NULL
6466 after call to mach_port_request_notification.
6467 (darwin_ptrace_me): Raise an error rather than a failed
6468 assertion when read returns nonzero.
6470 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6472 * amd64-darwin-tdep.c: Remove #include "gdb_assert.h".
6474 2013-05-05 Jan Kratochvil <jan.kratochvil@redhat.com>
6476 * cleanups.c (restore_my_cleanups): New gdb_assert for SENTINEL_CLEANUP.
6478 2013-05-05 Jan Kratochvil <jan.kratochvil@redhat.com>
6480 * event-top.c (display_gdb_prompt): Call missing do_cleanups.
6481 * infcmd.c (get_return_value) <!stop_regs>: Do not overwrite CLEANUP.
6482 * symfile.c (symfile_bfd_open): New variable back_to. Do not leave
6483 a stale cleanup. Fix double free of NAME.
6485 2013-05-04 Eli Zaretskii <eliz@gnu.org>
6487 * windows-nat.c (windows_delete_thread): Accept an additional
6488 argument, the thread's exit code, and announce thread death when
6489 print_thread_events is non-zero and we are deleting a thread that
6490 is not the main thread.
6491 (get_windows_debug_event): Pass thread exit code to
6492 windows_delete_thread.
6494 2013-05-03 Kevin Buettner <kevinb@redhat.com>
6496 * v850-tdep.c (elf-bfd.h, elf/v850.h): Include.
6497 (R_149_REGNUM, E_NUM_OF_V850E2_REGS, E_SELID_1_R0_REGNUM)
6498 (E_SELID_1_R31_REGNUM, E_SELID_2_R0_REGNUM, E_SELID_2_R31_REGNUM)
6499 (E_SELID_3_R0_REGNUM, E_SELID_3_R31_REGNUM, E_SELID_4_R0_REGNUM)
6500 (E_SELID_4_R31_REGNUM, E_SELID_5_R0_REGNUM, E_SELID_5_R31_REGNUM)
6501 (E_SELID_6_R0_REGNUM, E_SELID_6_R31_REGNUM, E_SELID_7_R0_REGNUM, E_SELID_7_R31_REGNUM)
6502 (E_VR0_REGNUM, E_VR31_REGNUM, E_NUM_OF_V850E3V5_REGS): Define.
6503 (v850_abi, V850_ABI_GCC, V850_ABI_RH850): New enum and constants.
6504 (gdbarch_tdep): New struct.
6505 (v850e2_register_name): Use E_NUM_OF_V850E2_REGS instead of
6507 (v850e3v5_register_name): New function.
6508 (v850_register_type): v850e3v5 vector registers are 64-bits wide.
6509 (v850_use_struct_convention): Add `gdbarch' parameter. Add new
6510 code handling the struct return conventions for the RH850 ABI.
6512 (v850_eight_byte_align_p): New function.
6513 (v850_push_call_dummy): Push structs by value, not by reference
6514 for the RH850 ABI. Add support for eight byte alignment.
6515 (v850_dbtrap_breakpoint_from_pc): New function.
6516 (v850_gdbarch_init): Add ABI detection code. Register
6517 v850e3v5_register_name for the v850e3v5 architecture. Set the
6518 number of registers for v850e3v5. Register
6519 v850_dbtrap_breakpoint_from_pc as appropriate.
6520 (_initialize_gdbarch_init): Registration bfd_arch_v850_rh850.
6522 2013-05-03 Doug Evans <dje@google.com>
6524 * objfiles.c (objfile_relocate): Use gdb_bfd_count_sections instead
6525 of bfd_count_sections.
6526 * solib-target.c (solib_target_relocate_section_addresses): Ditto.
6527 * symfile.c (default_symfile_offsets): Ditto.
6528 (syms_from_objfile_1): Ditto. Make dummy addrs list an array of
6529 one entry, not bfd_count_sections entries.
6531 2013-05-03 Kevin Buettner <kevinb@redhat.com>
6533 * rl78-tdep.c (rl78_register_reggroup_p): Include SP in the
6534 `save' and `restore' register groups. Don't include SPL
6535 or SPH in these groups.
6536 (rl78_dwarf_reg_to_regnum): Adjust mapping for
6537 RL78_PC_REGNUM. Add mappings for RL78_PSW_REGNUM,
6538 RL78_ES_REGNUM, and RL78_CS_REGNUM.
6539 (rl78_gdbarch_init): Set `dwarf2_addr_size' to 4. Invoke
6540 dwarf2_append_unwinders().
6542 2013-05-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
6544 * break-catch-sig.c (signal_catchpoint_breakpoint_hit): Do not
6545 ignore SIGINT and SIGTRAP in case these internal signals are
6548 2013-05-01 Joel Brobecker <brobecker@adacore.com>
6550 * darwin-nat.c (darwin_read_write_inferior): Change types
6551 of parameters rdaddr and wraddr to "gdb_byte *". Change type
6552 of copy_count to "mach_msg_type_number_t".
6553 (darwin_read_dyld_info): Change type of parameter
6554 rdaddr to "gdb_byte *".
6556 2013-05-01 Joel Brobecker <brobecker@adacore.com>
6558 * solib-ia64-hpux.c (ia64_hpux_read_dynamic_info): Change cast
6559 of &info->load_map from "char *" to "gdb_byte *".
6561 2013-05-01 Joel Brobecker <brobecker@adacore.com>
6563 * ia64-tdep.c (ia64_access_fpreg): Change cast of val
6564 from "char *" to "gdb_byte *".
6565 (ia64_access_rse_fpreg, ia64_access_mem): Likewise.
6567 2013-04-30 Doug Evans <dje@google.com>
6569 * dwarf2read.c (lookup_dwo_unit): Return NULL if DWO not found.
6570 (init_cutu_and_read_dies): Flag a complaint, not error, for bad
6571 DWO stub. If DWO isn't found, just use stub.
6572 (lookup_dwo_cutu): Don't try DWO if there's a DWP file.
6574 * dwarf2read.c (dw2_find_symbol_file): Initialize filename before
6575 calling init_cutu_and_read_dies.
6577 2013-03-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
6579 * target-descriptions.c (maint_print_c_tdesc_cmd):
6580 Add case to parse structures as register types and
6583 2013-04-30 Walfred Tedeschi <walfred.tedeschi@intel.com>
6585 * MAINTAINERS (Write After Approval): Add myself to the list.
6587 2013-04-30 Joel Brobecker <brobecker@adacore.com>
6589 * sol-thread.c (rw_common): Change type of parameter "buf"
6591 (ps_pdwrite, ps_ptwrite): Cast parameter "buf" in call to
6592 rw_common to "gdb_byte *" instead of "char *".
6594 2013-04-30 Joel Brobecker <brobecker@adacore.com>
6596 * sol-thread.c (info_cb) [ti.ti_startfunc != 0]: Change type
6597 of local variable msym to const struct bound_minimal_symbol.
6598 Adjust use accordingly.
6599 [ti.ti_state == TD_THR_SLEEP]: Likewise.
6601 2013-04-30 Samuel Thibault <samuel.thibault@gnu.org>
6603 * i386gnu-nat.c (CREG_OFFSET): New macro.
6604 (creg_offset): New array.
6605 (CREG_ADDR): Use creg_offset instead of reg_offset.
6607 2013-04-30 Joel Brobecker <brobecker@adacore.com>
6609 * mep-tdep.c (mep_write_pc): Delete.
6610 (mep_gdbarch_init): Remove call to set_gdbarch_write_pc.
6611 Add call to set_gdbarch_pc_regnum.
6613 2013-04-30 Joel Brobecker <brobecker@adacore.com>
6615 * common/filestuff.c: Replace #include <dirent.h> by
6616 #include "gdb_dirent.h".
6618 2013-04-30 Joel Brobecker <brobecker@adacore.com>
6620 * common/filestuff.c: Replace #include <sys/stat.h> by
6621 #include "gdb_stat.h".
6623 2013-04-29 Pierre Muller <muller@sourceware.org>
6625 * dwarf2read.c (handle_DW_AT_stmt_list): Avoid ARI warning for
6626 editCase function rule.
6627 (get_DW_AT_signature_type): Likewise.
6629 2013-04-29 Joel Brobecker <brobecker@adacore.com>
6631 * m32r-tdep.c (m32r_write_pc): Delete.
6632 (m32r_gdbarch_init): Remove call to set_gdbarch_write_pc.
6633 Add call to set_gdbarch_pc_regnum.
6635 2013-04-29 Pierre Muller <muller@sourceware.org>
6637 * ./contrib/ari/gdb_ari.sh (editCase rule): Fix spelling error.
6639 2013-04-29 Joel Brobecker <brobecker@adacore.com>
6641 * dwarf2read.c (get_DW_AT_signature_type): Add ARI marker.
6643 2013-04-28 Yao Qi <yao@codesourcery.com>
6645 * solib-dsbt.c (fetch_loadmap): Re-indent.
6646 (displacement_from_map, enable_break2): Likewise.
6647 (dsbt_relocate_section_addresses): Likewise.
6649 2013-04-26 Joel Brobecker <brobecker@adacore.com>
6653 2013-04-25 Andreas Kaufmann <Andreas.Kaufmann@synopsys.com>
6656 * dwarf2read.c (process_full_comp_unit): Always create a static
6659 2013-04-25 Hui Zhu <hui@codesourcery.com>
6661 * breakpoint.c (build_target_command_list): Change loc->cond_bytecode
6662 to loc->cmd_bytecode.
6664 2013-04-24 Doug Evans <dje@google.com>
6666 * dwarf2read.c (setup_type_unit_groups): Fix comment.
6668 2013-04-22 Keith Seitz <keiths@redhat.com>
6670 * tracepoint.c (trace_save): Call the writer's start method.
6672 2013-04-24 Muhammad Bilal <mbilal@codesourcery.com>
6675 * cli/cli-decode.c (lookup_command): Show an error if there is no space
6678 2013-04-23 Tom Tromey <tromey@redhat.com>
6680 * common/filestuff.c: Check USE_WIN32API before including
6682 (HAVE_F_GETFD): New define.
6683 (mark_cloexec): Check HAVE_F_GETFD.
6684 (gdb_open_cloexec): Change 'mode' to unsigned long.
6685 (gdb_socketpair_cloexec): Check HAVE_SOCKETPAIR.
6686 (gdb_pipe_cloexec): Check HAVE_PIPE.
6687 * common/filestuff.h (gdb_open_cloexec): Change 'mode' to unsigned
6690 2013-04-23 Hui Zhu <hui@codesourcery.com>
6693 * breakpoint.c (bpstat_what): Add BPSTAT_WHAT_SINGLE to bp_dprintf.
6695 2013-04-23 Hui Zhu <hui@codesourcery.com>
6698 * breakpoint.c (dprintf_print_recreate): New.
6699 (save_breakpoints): Let it not save dprintf commands.
6700 (initialize_breakpoint_ops): Set dprintf_print_recreate.
6702 2013-04-22 Tom Tromey <tromey@redhat.com>
6705 * Makefile.in (SFILES): Add filestuff.c
6706 (COMMON_OBS): Add filestuff.o.
6707 (filestuff.o): New target.
6708 * auto-load.c (auto_load_objfile_script_1): Use
6710 * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
6711 * cli/cli-cmds.c (shell_escape): Call close_most_fds.
6712 * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
6713 * common/agent.c (gdb_connect_sync_socket): Use
6715 * common/filestuff.c: New file.
6716 * common/filestuff.h: New file.
6717 * common/linux-osdata.c (linux_common_core_of_thread)
6718 (command_from_pid, commandline_from_pid, print_source_lines)
6719 (linux_xfer_osdata_shm, linux_xfer_osdata_sem)
6720 (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
6722 * common/linux-procfs.c (linux_proc_get_int)
6723 (linux_proc_pid_has_state): Use gdb_fopen_cloexec.
6724 * config.in, configure: Rebuild.
6725 * configure.ac: Don't check for sys/socket.h. Check for
6727 * corelow.c (core_open): Use gdb_open_cloexec.
6728 * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
6729 * fork-child.c (fork_inferior): Call close_most_fds.
6730 * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
6731 * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
6732 * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
6733 Use gdb_fopen_cloexec.
6734 (linux_proc_xfer_partial, linux_proc_xfer_spu): Use
6736 (linux_async_pipe): Use gdb_pipe_cloexec.
6737 * remote-fileio.c (remote_fileio_func_open): Use
6739 * remote.c (remote_file_put, remote_file_get): Use
6741 * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
6743 * ser-tcp.c (net_open): Use gdb_socket_cloexec.
6744 * ser-unix.c (hardwire_open): Use gdb_open_cloexec.
6745 * solib.c (solib_find): Use gdb_open_cloexec.
6746 * source.c (openp, find_and_open_source): Use gdb_open_cloexec.
6747 * tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
6748 (tfile_open): Use gdb_open_cloexec.
6749 * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
6750 * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
6751 * xml-support.c (xml_fetch_content_from_file): Use
6753 * main.c (captured_main): Call notice_open_fds.
6755 2013-04-22 Edjunior Machado <emachado@linux.vnet.ibm.com>
6757 * remote-sim.c (dump_mem): Change the type of 'buf' parameter from
6758 'char *' to 'gdb_byte *'.
6759 (gdbsim_store_register): Change the type of 'tmp' from 'char' to
6762 2013-04-22 Yao Qi <yao@codesourcery.com>
6764 * infrun.c: Fix typo in comment.
6766 2013-04-22 Andrew Haley <aph@redhat.com>
6768 * arm-tdep.c (BranchDest): Cast result as "unsigned long",
6771 2013-04-20 Yao Qi <yao@codesourcery.com>
6773 * ctf.c (ctf_fetch_registers): Change the type of 'regs' from
6774 'char *' to 'gdb_byte *'. Cast the return value of
6775 'bt_ctf_get_char_array' to 'gdb_byte *'.
6777 2013-04-19 Pedro Alves <palves@redhat.com>
6779 * configure.ac (build_warnings): Replace -Wno-pointer-sign with
6781 * configure: Regenerate.
6783 2013-04-19 Pedro Alves <palves@redhat.com>
6785 * ser-tcp.c (net_read_prim): Cast second argument to recv to
6788 2013-04-19 Pedro Alves <palves@redhat.com>
6790 * monitor.c (monitor_write_memory, monitor_write_memory_bytes):
6791 Change type of 'myaddr' parameter to gdb_byte pointer.
6792 (monitor_write_memory_longlongs): Likewise. Cast 'myaddr' pointer
6793 to 'long long' pointer instead of to 'unsigned long long'.
6794 (monitor_write_memory_block, monitor_read_memory_single)
6795 (monitor_read_memory): Change type of 'myaddr' parameter to
6798 2013-04-19 Pedro Alves <palves@redhat.com>
6800 * record.c (validate_history_size): Make parameter 'setting'
6803 2013-04-19 Pedro Alves <palves@redhat.com>
6805 * ctf.c (ctf_write_uploaded_tsv, ctf_write_uploaded_tp): Add casts
6808 2013-04-19 Pedro Alves <palves@redhat.com>
6810 * cp-valprint.c (cp_print_class_member): Change type of 'fieldno'
6813 2013-04-19 Pedro Alves <palves@redhat.com>
6815 * ada-lang.c (print_it_exception): Add cast to gdb_byte *.
6816 * ada-tasks.c (read_fat_string_value): Likewise.
6818 2013-04-19 Pedro Alves <palves@redhat.com>
6820 * dwarf2-frame.c (execute_cfa_program): Make 'bytes_read' local
6821 unsigned. Pass 'tmp' to safe_read_uleb128 instead of the signed
6822 'offset', and adjust.
6824 2013-04-19 Pedro Alves <palves@redhat.com>
6826 * dwarf2read.c (dwarf2_get_dwz_file): Add cast to const char *.
6827 (read_index_from_section): Add cast to 'char *'.
6829 2013-04-19 Pedro Alves <palves@redhat.com>
6831 * xcoffread.c (xcoff_initial_scan): Add cast to 'char *'.
6833 2013-04-19 Pedro Alves <palves@redhat.com>
6835 * coff-pe-read.c (read_pe_exported_syms): Handle strings as char.
6837 2013-04-19 Pedro Alves <palves@redhat.com>
6839 * record-full.c (record_full_get_bookmark): Change local 'ret'
6840 type to char * and add cast to gdb_byte *.
6841 (record_full_goto_bookmark): Handle 'bookmark' argument as a
6843 * reverse.c (goto_bookmark_command): Add casts to gdb_byte *.
6845 2013-04-19 Pedro Alves <palves@redhat.com>
6847 * python/py-inferior.c (infpy_write_memory): Add cast to gdb_byte
6848 * python/py-prettyprint.c (print_string_repr): Change type of
6849 'output' local to char *. Add cast to gdb_byte * in
6850 LA_PRINT_STRING call.
6851 (print_children): Change type of 'output' local to char *.
6852 * python/py-value.c (valpy_string): Add cast to const char * in
6853 PyUnicode_Decode call.
6855 2013-04-19 Pedro Alves <palves@redhat.com>
6857 * remote-mips.c (mips_cksum): Rename 'data' parameter to 'datastr'
6858 and change its type to 'const char *'. Adjust.
6859 (mips_send_packet): Add cast to 'char *', and remove cast to
6861 (mips_receive_packet): Remove cast to 'unsigned char *'.
6862 (mips_load_srec): Use bfd_byte.
6863 (pmon_makeb64, pmon_zeroset): Make 'chksum' parameter unsigned.
6864 (pmon_checkset): Make 'value' parameter unsigned.
6866 2013-04-19 Pedro Alves <palves@redhat.com>
6868 * common/agent.c (agent_run_command): Add cast to gdb_byte *.
6870 2013-04-19 Pedro Alves <palves@redhat.com>
6872 * remote.c (remote_write_bytes_aux, compare_sections_command)
6874 (remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
6875 (remote_hostio_readlink, remote_bfd_iovec_pread)
6876 (remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
6877 binary buffer, and char when buffer is used as string.
6878 * tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
6879 (trace_save, tfile_open, traceframe_walk_blocks)
6880 (tfile_fetch_registers): Likewise.
6882 2013-04-19 Pedro Alves <palves@redhat.com>
6884 * ser-base.c (ser_base_write): Change prototype -- take 'void *'
6885 buffer and size_t size. Adjust.
6886 * ser-base.h (ser_base_write): Adjust.
6887 * ser-go32.c (cnts): Change type to size_t.
6888 (dos_write): Change prototype -- take 'void *'
6889 buffer and size_t size. Adjust.
6890 (dos_info): Print elements of 'cnts' as unsigned long.
6891 * serial.c (serial_write): Likewise.
6892 * serial.h (serial_write): Adjust.
6893 (struct serial_ops) <write>: Change prototype -- take 'void *'
6894 buffer and size_t size. Adjust.
6896 2013-04-19 Pedro Alves <palves@redhat.com>
6898 * c-lang.c (evaluate_subexp_c): Cast result of obstack_base to
6900 * linux-tdep.c (linux_make_mappings_corefile_notes): Likewise.
6902 2013-04-19 Pedro Alves <palves@redhat.com>
6904 * alpha-tdep.c (alpha_extract_return_value): Use
6905 regcache_cooked_read_unsigned to read 'v0'.
6907 2013-04-19 Pedro Alves <palves@redhat.com>
6909 * xtensa-tdep.c (execute_l32e, execute_s32e): Change type of
6910 parameters 'at', 'as' and 'offset' to uint32_t.
6912 2013-04-19 Pedro Alves <palves@redhat.com>
6914 * aarch64-tdep.c (aarch64_analyze_prologue): Change type of local
6915 'is64' to signed 'int'.
6917 2013-04-19 Pedro Alves <palves@redhat.com>
6919 * s390-tdep.c (is_rs, is_rsy, is_rx, is_rxy): Change type of 'd2'
6922 2013-04-19 Pedro Alves <palves@redhat.com>
6924 * ppc-linux-tdep.c (ppc_skip_trampoline_code): Change local
6925 'insnbuf' buffer type to unsigned int[].
6927 2013-04-19 Pedro Alves <palves@redhat.com>
6929 * mips-tdep.c (mips_read_pc): Change local 'pc' type to LONGEST.
6931 2013-04-19 Pedro Alves <palves@redhat.com>
6933 * mep-tdep.c (mep_get_insn): Change 'insn' parameter type to
6936 2013-04-19 Pedro Alves <palves@redhat.com>
6938 * alpha-tdep.c (heuristic_fence_post): Change type to int.
6939 (alpha_heuristic_proc_start): Adjust to check -1 instead of
6941 * mips-tdep.c (heuristic_fence_post): Change type to int.
6942 (heuristic_proc_start): Adjust to check -1 instead of UINT_MAX.
6944 2013-04-19 Pedro Alves <palves@redhat.com>
6946 * cris-tdep.c (usr_cmd_cris_version): Make unsigned.
6947 (struct gdbarch_tdep) <cris_version>: Make unsigned.
6948 (cris_spec_reg_applicable, cris_gdbarch_init): Adjust locals.
6950 2013-04-19 Pedro Alves <palves@redhat.com>
6952 * avr-tdep.c (avr_io_reg_read_command): New local 'bufstr'. Use
6953 it to get a string view of the byte buffer.
6954 * i386-cygwin-tdep.c (core_process_module_section): Change local 'buf'
6955 type to gdb_byte *. Adjust.
6956 * linux-tdep.c (linux_info_proc, linux_find_memory_regions_full):
6957 Change local to char *.
6958 * solib-darwin.c (find_program_interpreter): Change return type to
6960 (darwin_solib_get_all_image_info_addr_at_init): Adjust.
6961 * solib-dsbt.c (enable_break2): Change local 'buf' to char *.
6962 * solib-frv.c (enable_break2): Change local 'buf' to char *.
6963 * solib-spu.c (spu_current_sos): Add gdb_byte * cast.
6964 * solib-svr4.c (find_program_interpreter): Change return type to
6966 (enable_break): Change local 'interp_name' to char *.
6967 * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
6968 * spu-tdep.c (spu_pseudo_register_read_spu): Add cast to 'char *'.
6969 (spu_pseudo_register_write_spu): Use char for string buffer.
6971 (info_spu_event_command, info_spu_signal_command): Add casts to
6974 2013-04-19 Pedro Alves <palves@redhat.com>
6976 * aarch64-tdep.c (aarch64_default_breakpoint): Change type to
6978 (aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
6979 * ada-lang.c (ada_value_assign): Use gdb_byte.
6980 * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
6981 (alphanbsd_sigtramp_offset): Use gdb_byte.
6982 * arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
6983 (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
6984 (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
6985 (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
6986 (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
6987 * arm-tdep.c (arm_stub_unwind_sniffer)
6988 (arm_displaced_init_closure): Use gdb_byte.
6989 (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
6990 (arm_default_thumb_le_breakpoint)
6991 (arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
6992 * arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
6993 thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
6994 * arm-wince-tdep.c (arm_wince_le_breakpoint)
6995 (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
6996 * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
6997 (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
6998 (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
6999 * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
7000 (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
7001 * cris-tdep.c (push_stack_item, cris_push_dummy_call)
7002 (cris_store_return_value, cris_extract_return_value): Use
7004 (constraint): Change type of parameter to char * from signed
7005 char*. Use gdb_byte.
7006 * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
7007 of local buffer to gdb_byte *.
7008 * dwarf2read.c (read_index_from_section): Use gdb_byte.
7009 (create_dwp_hash_table): Change type of locals to gdb_byte *.
7010 (add_address_entry): Change type of local buffer to gdb_byte[].
7011 * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
7012 (frv_push_dummy_call): Use gdb_byte.
7013 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
7014 (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
7015 (hppa_hpux_supply_save_state): Use gdb_byte.
7016 * hppa-tdep.c (hppa32_push_dummy_call)
7017 (hppa64_convert_code_addr_to_fptr): Use gdb_byte.
7018 * ia64-tdep.c (extract_bit_field, replace_bit_field)
7019 (slotN_contents, replace_slotN_contents): Change type of parameter
7021 (fetch_instruction, ia64_pseudo_register_write)
7022 (ia64_register_to_value, ia64_value_to_register)
7023 (ia64_extract_return_value, ia64_store_return_value)
7024 (ia64_push_dummy_call): Use gdb_byte.
7025 * m32c-tdep.c (m32c_return_value): Remove cast.
7026 * m68hc11-tdep.c (m68hc11_pseudo_register_write)
7027 (m68hc11_push_dummy_call, m68hc11_store_return_value): Use
7029 * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
7030 * mn10300-tdep.c (mn10300_store_return_value)
7031 (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
7033 * moxie-tdep.c (moxie_process_readu): Use gdb_byte.
7034 (moxie_process_record): Remove casts.
7035 * ppc-ravenscar-thread.c (supply_register_at_address)
7036 (ppc_ravenscar_generic_store_registers): Use gdb_byte.
7037 * ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
7038 * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
7039 * remote-mips.c (mips_xfer_memory): Use gdb_byte.
7040 * remote.c (compare_sections_command): Use gdb_byte.
7041 * score-tdep.c (score7_free_memblock): Change type of parameter to
7043 * sh-tdep.c (sh_justify_value_in_reg): Change return type to
7044 gdb_byte *. Use gdb_byte.
7045 (sh_push_dummy_call_fpu): Use gdb_byte.
7046 (sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
7047 (sh_store_return_value_nofpu, sh_store_return_value_fpu)
7048 (sh_register_convert_to_virtual, sh_register_convert_to_raw):
7049 Change parameter type to 'gdb_byte *'. Use gdb_byte.
7050 (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
7051 * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
7052 (sh64_store_return_value, sh64_register_convert_to_virtual):
7053 Change parameter type to 'gdb_byte *'. Use gdb_byte.
7054 (sh64_pseudo_register_write): Use gdb_byte.
7055 * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
7056 * solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
7058 (irix_current_sos): Use gdb_byte.
7059 * solib-som.c (som_current_sos): Use gdb_byte.
7060 * sparc-ravenscar-thread.c (supply_register_at_address)
7061 (sparc_ravenscar_generic_store_registers): Use gdb_byte.
7062 * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
7063 * spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
7064 * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
7066 * tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
7068 * tracepoint.c (tfile_fetch_registers): Use gdb_byte.
7069 * xstormy16-tdep.c (xstormy16_extract_return_value)
7070 (xstormy16_store_return_value): Change parameter type to
7071 'gdb_byte *'. Adjust.
7072 (xstormy16_push_dummy_call): Use gdb_byte.
7073 * xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
7074 (call0_analyze_prologue, execute_code): Use gdb_byte.
7076 2013-04-19 Vladimir Kargov <kargov@gmail.com>
7077 Pedro Alves <palves@redhat.com>
7079 * i387-tdep.c (i387_print_float_info): Use gdb_byte for pointer to
7082 2013-04-17 Doug Evans <dje@google.com>
7084 * dwarf2read.c (struct signatured_type): New member type.
7085 (struct attribute): Replace member signatured_type with signature.
7086 (DW_SIGNATURE): Replaces DW_SIGNATURE_TYPE.
7087 (read_call_site_scope): Call follow_die_ref instead of
7088 follow_die_ref_or_sig.
7089 (read_structure_type): Rewrite handling of signatured types.
7090 (read_enumeration_type): Ditto.
7091 (read_attribute_value): Update.
7092 (build_error_marker_type): New function.
7093 (lookup_die_type): Add assert. Rewrite handling of signatured types.
7094 Don't call error for bad types, just build an error marker type.
7095 (dump_die_shallow): Update.
7096 (follow_die_sig_1): Renamed from follow_die_sig.
7097 Don't call error for bad types, instead return NULL.
7098 (follow_die_sig): New function.
7099 (get_signatured_type, get_DW_AT_signature_type): New functions.
7101 2013-04-17 Yufeng Zhang <yufeng.zhang@arm.com>
7103 * aarch64-tdep.c (aarch64_write_pc): Removed.
7104 (aarch64_gdbarch_init): Remove set_gdbarch_write_pc of the above
7107 2013-04-17 Yao Qi <yao@codesourcery.com>
7109 * top.c (print_gdb_configuration): Print configure-time
7110 parameter on using libbabeltrace or not.
7112 2013-04-16 Pedro Alves <palves@redhat.com>
7114 * copyright.py (EXCLUDE_LIST): Add gdb/common/glibc_thread_db.h.
7116 2013-04-16 Pedro Alves <palves@redhat.com>
7118 * common/glibc_thread_db.h: Update from upstream glibc
7119 (git 568035b7874a099087b77f7bba3e36a1173787b0).
7121 2013-04-16 Pedro Alves <palves@redhat.com>
7123 * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: Factor out to ...
7124 * common/glibc_thread_db.h: ... this new file ...
7125 * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: ... and include it.
7127 2013-04-16 Will Newton <will.newton@gmail.com>
7128 Pedro Alves <palves@redhat.com>
7132 * common/gdb_thread_db.h (LIBTHREAD_DB_SO)
7133 (LIBTHREAD_DB_SEARCH_PATH): Move outside of #ifdef
7136 2013-04-16 Pedro Alves <palves@redhat.com>
7137 Eli Zaretskii <eliz@gnu.org>
7139 * NEWS: Mention "set foo unlimited".
7141 2013-04-15 Doug Evans <dje@google.com>
7143 * dwarf2read.c (struct dwo_file): Replace member "cus" with "cu".
7144 (struct create_dwo_cu_data): Renamed from create_dwo_info_table_data.
7145 (create_dwo_cu_reader): Renamed from
7146 create_dwo_debug_info_hash_table_reader.
7147 (create_dwo_cu): Renamed from create_dwo_debug_info_hash_table.
7148 Remove support for multiple CUs in a DWO file.
7149 (open_and_init_dwo_file, lookup_dwo_cutu): Update.
7151 * dwarf2read.c (create_debug_types_hash_table): Use hex_string
7153 (lookup_dwo_unit, create_dwo_debug_info_hash_table_reader): Ditto.
7154 (create_dwo_in_dwp): Ditto.
7156 2013-04-15 Tom Tromey <tromey@redhat.com>
7158 * NEWS: Move recent entries into "since 7.6" section.
7160 2013-04-15 Tom Tromey <tromey@redhat.com>
7164 * break-catch-throw.c (struct exception_catchpoint)
7165 <exception_rx, pattern>: New fields.
7166 (fetch_probe_arguments, dtor_exception_catchpoint)
7167 (check_status_exception_catchpoint)
7168 (print_one_detail_exception_catchpoint): New functions.
7169 (handle_gnu_v3_exceptions): Add "except_rx" argument.
7170 Compile regular expression if needed.
7171 (extract_exception_regexp): New function.
7172 (catch_exception_command_1): Use extract_exception_regexp.
7173 (compute_exception): Use fetch_probe_arguments.
7174 (initialize_throw_catchpoint_ops): Set dtor, print_one_detail,
7175 and check_status fields.
7176 * cp-abi.c (cplus_typename_from_type_info): New function.
7177 * cp-abi.h (cplus_typename_from_type_info): Declare.
7178 (struct cp_abi_ops) <get_typename_from_type_info>: New field.
7179 * gdb_regex.h (compile_rx_or_error): Declare.
7180 * gnu-v3-abi.c (gnuv3_get_typename_from_type_info): Update
7182 (init_gnuv3_ops): Set get_type_from_type_info field.
7183 * probe.c (compile_rx_or_error): Move...
7184 * utils.c (compile_rx_or_error): ... here.
7186 2013-04-15 Tom Tromey <tromey@redhat.com>
7190 * break-catch-throw.c (compute_exception): New function.
7191 (exception_funcs): New global.
7192 (_initialize_break_catch_throw): Create $_exception.
7193 * cp-abi.c (cplus_type_from_type_info): New function.
7194 * cp-abi.h (cplus_type_from_type_info): Declare.
7195 (struct cp_abi_ops) <get_type_from_type_info>: New field.
7196 * gnu-v3-abi.c (gnuv3_get_typename_from_type_info)
7197 (gnuv3_get_type_from_type_info): New functions.
7198 (init_gnuv3_ops): Set get_type_from_type_info ABI field.
7200 2013-04-15 Tom Tromey <tromey@redhat.com>
7202 * break-catch-throw.c (struct exception_names): New.
7203 (exception_functions): Change type.
7204 (re_set_exception_catchpoint): Look for SDT probes.
7206 2013-04-15 Tom Tromey <tromey@redhat.com>
7209 * break-catch-throw.c (exception_functions): New global.
7210 (gnu_v3_exception_catchpoint_ops): Move earlier.
7211 (struct exception_catchpoint): New.
7212 (classify_exception_breakpoint): Rewrite.
7213 (re_set_exception_catchpoint): New function.
7214 (handle_gnu_v3_exceptions): Return void. Use init_catchpoint.
7215 Allocate a struct exception_catchpoint.
7216 (catch_exception_command_1): Update.
7217 (initialize_throw_catchpoint_ops): Set 're_set' method.
7219 2013-04-15 Tom Tromey <tromey@redhat.com>
7221 * Makefile.in (SFILES): Add break-catch-throw.c
7222 (COMMON_OBS): Add break-catch-throw.o.
7223 * break-catch-throw.c: New file.
7224 * breakpoint.c: Move exception-catching code to new file.
7225 (ep_parse_optional_if_clause): No longer static.
7226 * breakpoint.h (ep_parse_optional_if_clause): Declare.
7228 2013-04-15 Tom Tromey <tromey@redhat.com>
7232 * breakpoint.c (watchpoint_exp_is_const): Add OP_TYPEID.
7233 * c-exp.y (TYPEID): New token.
7234 (exp): Add new TYPEID productions.
7235 (ident_tokens): Add "typeid".
7236 * cp-abi.c (cplus_typeid, cplus_typeid_type): New functions.
7237 * cp-abi.h (cplus_typeid, cplus_typeid_type): Declare.
7238 (struct cp_abi_ops) <get_typeid, get_typeid_type>: New fields.
7239 * eval.c (evaluate_subexp_standard) <OP_TYPEID>: New case.
7240 * expprint.c (dump_subexp_body_standard) <OP_TYPEID>: New
7242 * gnu-v3-abi.c (std_type_info_gdbarch_data): New global.
7243 (build_std_type_info_type, gnuv3_get_typeid_type)
7244 (gnuv3_get_typeid): New functions.
7245 (init_gnuv3_ops): Initialize std_type_info_gdbarch_data. Set
7246 new fields on ABI object.
7247 * parse.c (operator_length_standard) <OP_TYPEID>: New case.
7248 * std-operator.def (OP_TYPEID): New.
7250 2013-04-15 Tom Tromey <tromey@redhat.com>
7252 * elfread.c (elf_symtab_read): Install versioned symbol under
7253 unversioned name as well.
7255 2013-04-15 Tom Tromey <tromey@redhat.com>
7258 * c-lang.c (cplus_language_defn): Use gdb_demangle.
7259 * c-typeprint.c (c_type_print_base): Use gdb_demangle.
7260 * cp-support.c (mangled_name_to_comp): Use gdb_demangle.
7261 (gdb_demangle): New function.
7262 * cp-support.h (gdb_demangle): Declare.
7263 * dwarf2read.c (dwarf2_physname, fixup_partial_die)
7264 (dwarf2_name): Use gdb_demangle.
7265 * gdbtypes.c (check_stub_method): Use gdb_demangle.
7266 * gnu-v3-abi.c (gnuv3_rtti_type): Strip @plt and version
7268 (gnuv3_print_method_ptr): Use gdb_demangle.
7269 * jv-lang.c (java_demangle): Use gdb_demangle.
7270 * jv-typeprint.c (java_type_print_base): Use gdb_demangle.
7271 * language.c (unk_lang_demangle): Use gdb_demangle.
7272 * symtab.c (symbol_find_demangled_name)
7273 (demangle_for_lookup): Use gdb_demangle.
7275 2013-04-15 Tom Tromey <tromey@redhat.com>
7279 * breakpoint.c (enum exception_event_kind) <EX_EVENT_RETHROW>:
7281 (classify_exception_breakpoint): New function.
7282 (print_it_exception_catchpoint, print_one_exception_catchpoint)
7283 (print_mention_exception_catchpoint)
7284 (print_recreate_exception_catchpoint, handle_gnu_v3_exceptions)
7285 (catch_exception_command_1): Handle "rethrow" catchpoint.
7286 (catch_rethrow_command): New function.
7287 (_initialize_breakpoint): Add "catch rethrow" command.
7289 2013-04-15 Pierre Muller <muller@sourceware.org>
7291 * contrib/ari/gdb_ari.sh (write_pc rule): Do not consider
7292 set_gdbarch_write_pc as deprecated anymore.
7294 2013-04-15 Joel Brobecker <brobecker@adacore.com>
7296 * spu-tdep.c (spu_write_pc): Add empty line after local variable
7299 2013-04-13 Yao Qi <yao@codesourcery.com>
7301 * ctf.c (_initialize_ctf): Include "completer.h".
7302 Call add_target_with_completer instead of add_target.
7304 2013-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
7306 Fix GDB regression related to PR binutils/14813.
7307 * jit.c (mem_bfd_iovec_close): Return 0 for success.
7308 * minidebug.c (lzma_close): Add return value comment.
7309 * remote.c (remote_bfd_iovec_close): Return 0 for success.
7310 * solib-spu.c (spu_bfd_iovec_close): Likewise.
7311 * spu-linux-nat.c (spu_bfd_iovec_close): Likewise.
7313 2013-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
7315 * config.in: Regenerate.
7317 2013-04-12 Tom Tromey <tromey@redhat.com>
7319 * dwarf2-frame.c (struct comp_unit) <dwarf_frame_buffer>: Now
7321 * dwarf2read.c (struct dwarf2_section_info) <buffer>: Now const.
7322 (struct die_reader_specs) <buffer>: Likewise.
7323 (die_reader_func_ftype): Make 'info_ptr' const.
7324 (struct line_header) <include_dirs, statement_program_start,
7325 statement_program_end>: Now const.
7326 (struct file_entry) <name>: Likewise.
7327 (struct partial_die_info) <sibling>: Likewise.
7328 (struct dwarf_block) <data>: Likewise.
7329 (dwarf2_read_section): Remove cast.
7330 (dwarf2_get_section_info): Make 'bufp' const.
7331 (read_index_from_section): Constify.
7332 (dw2_get_file_names_reader): Make 'info_ptr' const.
7333 (dw2_get_primary_filename_reader): Likewise.
7334 (read_comp_unit_head): Make 'info_ptr' and return type const.
7335 (read_and_check_comp_unit_head, read_and_check_type_unit_head):
7337 (read_abbrev_offset): Constify.
7338 (dwarf2_create_include_psymtab): Make 'name' const.
7339 (create_debug_types_hash_table): Update.
7340 (read_cutu_die_from_dwo): Make 'result_info_ptr' const.
7341 (init_cutu_and_read_dies, init_cutu_and_read_dies_no_follow):
7343 (process_psymtab_comp_unit_reader, build_type_psymtabs_reader)
7344 (load_partial_comp_unit_reader): Make 'info_ptr' const.
7345 (read_comp_units_from_section): Constify.
7346 (peek_abbrev_code, peek_die_abbrev, skip_children, skip_one_die)
7347 (locate_pdi_sibling, load_full_comp_unit_reader): Make 'info_ptr'
7349 (dwarf2_compute_name, setup_type_unit_groups): Constify.
7350 (create_dwo_debug_info_hash_table): Make 'info_ptr' const.
7351 (create_dwp_hash_table, dwarf2_ranges_read)
7352 (dwarf2_record_block_ranges): Constify.
7353 (read_die_and_children, read_die_and_siblings_1)
7354 (read_die_and_siblings): Make 'info_ptr' and 'new_info_ptr'
7356 (read_full_die_1, read_full_die): Make 'info_ptr' const.
7357 (abbrev_table_read_table): Constify.
7358 (load_partial_dies): Make 'info_ptr' const.
7359 (read_partial_die, read_attribute_value, read_attribute): Make
7360 'info_ptr' and return type const.
7361 (read_address, read_initial_length)
7362 (read_checked_initial_length_and_offset, read_offset)
7363 (read_offset_1, read_n_bytes, read_direct_string): Make 'buf'
7365 (read_direct_string): Make 'buf' and return type const.
7366 (read_indirect_string_at_offset, read_indirect_string_from_dwz)
7367 (read_indirect_string): Make return type const.
7368 (read_unsigned_leb128, read_signed_leb128): Make 'buf' const.
7369 (read_addr_index_from_leb128, dwarf2_read_addr_index_reader): Make
7371 (read_str_index): Make return type const.
7372 (add_include_dir): Make 'include_dir' const.
7373 (add_file_name): Make 'name' const.
7374 (dwarf_decode_line_header): Constify.
7375 (psymtab_include_file_name): Make return type const.
7376 (dwarf_decode_lines_1, dwarf_decode_lines): Constify.
7377 (dwarf2_start_subfile): Make 'filename' const.
7378 (dwarf2_const_value_attr): Make 'bytes' const.
7379 (read_signatured_type_reader): Make 'info_ptr' const.
7380 (decode_locdesc): Constify.
7381 (skip_form_bytes): Make 'bytes', 'buffer_end', and return type
7383 (skip_unknown_opcode): Make 'opcode_definitions', 'mac_ptr',
7384 'mac_end', and return type const.
7385 (dwarf_parse_macro_header): Make 'mac_ptr' and return type const.
7386 (dwarf_decode_macro_bytes): Make 'mac_ptr', 'mac_end', and return
7388 (per_cu_header_read_in): Constify.
7389 * symfile.h (dwarf2_get_section_info): Update.
7391 2013-04-12 Tom Tromey <tromey@redhat.com>
7393 * symtab.h (struct general_symbol_info) <value.bytes>: Make const.
7395 2013-04-12 Eli Zaretskii <eliz@gnu.org>
7397 * NEWS: Mention "show configuration", --configuration.
7398 * top.c (print_gdb_configuration): New function, displays the
7399 details about GDB configure-time parameters.
7400 (print_gdb_version): Mention "show configuration".
7401 * cli/cli-cmds.c (show_configuration): New function.
7402 (_initialize_cli_cmds): Add the "show configuration" command.
7403 * main.c (captured_main) <print_configuration>: New static var.
7404 <long_options>: Use it.
7405 If --configuration was given, call print_gdb_configuration.
7407 2013-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
7408 Pedro Alves <palves@redhat.com>
7410 * Makefile.in (HAVE_NATIVE_GCORE_TARGET): New.
7411 (generated_files): Add gcore.
7412 (install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or
7413 HAVE_NATIVE_GCORE_HOST.
7415 * NEWS (Changes since GDB 7.6): Mention newly installed gcore.
7416 * config/alpha/alpha-osf3.mh, config/i386/fbsd.mh,
7417 config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh,
7418 config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh,
7419 config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh:
7420 Add HAVE_NATIVE_GCORE_HOST.
7421 * configure: Regenerate.
7422 * configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it.
7423 New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME. New
7424 AC_CONFIG_FILES for gcore.
7425 * configure.tgt: Add gdb_have_gcore to the initial comment. Set
7427 * gdb_gcore.sh: Rename to ...
7428 * gcore.in: ... here. Remove gcore.sh comment. Use GDB_TRANSFORM_NAME
7429 and GCORE_TRANSFORM_NAME substitutions.
7431 Fix parsing tabs in ${gdb_target_obs}.
7432 * configure.tgt (gdb_have_gcore): Replace case with for and if.
7434 2013-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
7436 * remote.c (unpush_and_perror): Add output message final dot.
7438 2013-04-11 Yao Qi <yao@codesourcery.com>
7440 * tracepoint.c (tfile_interp_line): Fit parameters line and
7443 2013-04-10 Joel Brobecker <brobecker@adacore.com>
7445 * solib.c (solib_map_sections): Remove code overwriting
7446 SO->SO_NAME with the bfd's filename.
7448 2013-04-10 Pedro Alves <palves@redhat.com>
7450 * cli/cli-decode.c (integer_unlimited_completer): New function.
7451 (add_setshow_integer_cmd, add_setshow_uinteger_cmd)
7452 (add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
7454 * cli/cli-setshow.c: Include "cli/cli-utils.h".
7455 (is_unlimited_literal): New function.
7456 (do_set_command): Handle literal "unlimited" arguments.
7457 * frame.c (_initialize_frame) <set backtrace limit>: Document
7459 * printcmd.c (_initialize_printcmd) <set print
7460 max-symbolic-offset>: Add help text.
7461 * record-full.c (_initialize_record_full) <set record full
7462 insn-number-max>: Likewise.
7463 * record.c (_initialize_record) <set record
7464 instruction-history-size, set record function-call-history-size>:
7466 * ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
7468 * tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
7470 * source.c (_initialize_source) <set listsize>: Add help text.
7471 * utils.c (initialize_utils) <set height, set width>: Likewise.
7472 <set pagination>: Mention "set height unlimited".
7473 * valprint.c (_initialize_valprint) <set print elements, set print
7474 repeats>: Document "unlimited".
7476 2013-04-10 Pedro Alves <palves@redhat.com>
7478 * cli/cli-cmds.c (quit_command): Call query_if_trace_running
7479 instead of disconnect_tracing.
7480 * infcmd.c (detach_command, disconnect_command): Call
7481 query_if_trace_running. Adjust.
7482 * top.c: Include "tracepoint.h".
7483 (quit_target): Delete. Contents moved ...
7484 (quit_force): ... here. Wrap each stage of teardown in
7485 TRY_CATCH. Call disconnect_tracing before detaching.
7487 2013-04-10 Hui Zhu <hui@codesourcery.com>
7488 Yao Qi <yao@codesourcery.com>
7490 * configure.ac: Check libbabeltrace is installed.
7491 * config.in: Regenerate.
7492 * configure: Regenerate.
7493 * Makefile.in (LIBBABELTRACE): New.
7494 (CLIBS): Add LIBBABELTRACE.
7495 * ctf.c: Include "exec.h".
7496 (CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros.
7497 (CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros.
7498 (ctf_save_metadata_header): Define new type aliases in
7500 (ctf_write_header): Define event type "tsv_def" and "tp_def"
7501 in metadata. Start a new faked packet for trace status.
7502 (ctf_write_status): Write trace status to CTF.
7503 (ctf_write_uploaded_tsv): Write TSV to CTF.
7504 (ctf_write_uploaded_tp): Write tracepoint definition to CTF.
7505 (ctf_write_definition_end): End the faked packet.
7507 (ctx, ctf_iter, trace_dirname): New.
7508 (start_pos): New variable.
7509 (ctf_destroy, ctf_open_dir, ctf_open): New.
7510 (SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New
7512 (ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New.
7513 (ctf_fetch_registers, ctf_xfer_partial): New.
7514 (ctf_get_trace_state_variable_value): New.
7515 (ctf_get_tpnum_from_frame_event): New.
7516 (ctf_get_traceframe_address): New.
7517 (ctf_trace_find, ctf_has_stack): New.
7518 (ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New.
7519 (ctf_get_trace_status, ctf_read_status): New.
7520 (_initialize_ctf): New.
7521 * tracepoint.c (get_tracepoint_number): New
7522 (get_uploaded_tsv): Remove 'static'.
7523 (struct traceframe_info, trace_regblock_size): Move it to ...
7524 * tracepoint.h: ... here.
7525 (get_tracepoint_number): Declare it.
7526 (get_uploaded_tsv): Declare it.
7528 * NEWS: Mention new configure option.
7530 2013-04-10 Pedro Alves <palves@redhat.com>
7531 Hui Zhu <hui@codesourcery.com>
7533 * breakpoint.c (dprintf_re_set): New.
7534 (initialize_breakpoint_ops): Set dprintf_breakpoint_ops re_set
7537 2013-04-09 Joel Brobecker <brobecker@adacore.com>
7539 * configure.tgt (gdb_target_obs) <powerpc-*-aix* | rs6000-*-*>:
7540 Remove solib-svr4.o from the list.
7542 2013-04-09 Joel Brobecker <brobecker@adacore.com>
7544 * varobj.c (update_dynamic_varobj_children) [!HAVE_PYTHON]:
7545 Use gdb_assert_not_reached instead of invalid boolean expression.
7547 2013-04-09 Pedro Alves <palves@redhat.com>
7549 * remote.c (unpush_and_perror): New function.
7550 (readchar, remote_serial_write): Use it.
7552 2013-04-09 Markus Metzger <markus.t.metzger@intel.com>
7554 * NEWS: Mention new btrace RSP packets.
7556 2013-04-08 Tom Tromey <tromey@redhat.com>
7558 * symmisc.c (dump_msymbols): Cast fprintf_filtered argument to
7561 2013-04-08 Tom Tromey <tromey@redhat.com>
7563 * maint.c (print_bfd_section_info): Print the section index.
7564 * symmisc.c (dump_msymbols): Print the section index.
7566 2013-04-08 Tom Tromey <tromey@redhat.com>
7569 * blockframe.c (find_pc_partial_function_gnu_ifunc): Check
7570 SYMBOL_SECTION, not SYMBOL_OBJ_SECTION.
7571 * breakpoint.c (resolve_sal_pc): Update.
7572 * elfread.c (elf_gnu_ifunc_record_cache): Update.
7573 * findvar.c (struct minsym_lookup_data) <objfile>: New field.
7574 (minsym_lookup_iterator_cb): Use it.
7575 (default_read_var_value): Update.
7576 * hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline):
7578 * infcmd.c (jump_command): Update.
7579 * linespec.c (minsym_found): Update.
7580 * maint.c (maintenance_translate_address): Update.
7581 * minsyms.c (lookup_minimal_symbol_by_pc_section_1): Update.
7582 (prim_record_minimal_symbol_full): Don't set SYMBOL_OBJ_SECTION.
7583 * parse.c (write_exp_msymbol): Update.
7584 * printcmd.c (address_info): Update.
7585 * psymtab.c (find_pc_sect_psymbol): Update.
7586 (fixup_psymbol_section): Check SYMBOL_SECTION, not
7588 (add_psymbol_to_bcache): Correctly initialize SYMBOL_SECTION.
7589 Don't initialize SYMBOL_OBJ_SECTION.
7590 * spu-tdep.c (spu_catch_start): Update.
7591 * stabsread.c (define_symbol): Don't set SYMBOL_SECTION.
7592 * symmisc.c (dump_msymbols, print_symbol): Update.
7593 * symtab.c (fixup_section): Don't set 'obj_section'. Change
7594 how fallback section is computed.
7595 (fixup_symbol_section): Update.
7596 (find_pc_sect_symtab, find_function_start_sal, skip_prologue_sal):
7598 (allocate_symbol, initialize_symbol, allocate_template_symbol):
7599 Initialize SYMBOL_SECTION.
7600 * symtab.h (struct general_symbol_info) <section>: Update comment.
7601 <obj_section>: Remove.
7602 (SYMBOL_OBJ_SECTION): Add 'objfile' argument. Rewrite.
7603 (SYMBOL_OBJFILE): New macro.
7605 2013-04-08 Tom Tromey <tromey@redhat.com>
7607 * coffread.c (record_minimal_symbol): Update.
7608 * dbxread.c (record_minimal_symbol): Update.
7609 * elfread.c (record_minimal_symbol): Update.
7610 * machoread.c (macho_symtab_add_minsym): Update.
7611 * mdebugread.c (record_minimal_symbol, parse_partial_symbols):
7613 * minsyms.c (prim_record_minimal_symbol): Update.
7614 (prim_record_minimal_symbol_full): Remove 'bfd_section'
7616 (prim_record_minimal_symbol_and_info): Likewise.
7617 * minsyms.h (prim_record_minimal_symbol_full)
7618 (prim_record_minimal_symbol_and_info): Update.
7619 * symtab.c (allocate_symbol, initialize_symbol)
7620 (allocate_template_symbol): Initialize SYMBOL_SECTION.
7621 * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab):
7624 2013-04-08 Tom Tromey <tromey@redhat.com>
7627 * solib-som.c (som_solib_section_offsets): Use BFD section
7628 indices. Set offsets for all sections.
7629 * somread.c (som_symtab_read): Compute BFD section for
7630 symbol. Use prim_record_minimal_symbol_and_info.
7631 (som_symfile_read): Fix comment.
7632 (struct find_section_offset_arg): New.
7633 (find_section_offset, set_section_index): New functions.
7634 (som_symfile_offsets): Use set_section_index to compute
7637 2013-04-08 Tom Tromey <tromey@redhat.com>
7639 * coffread.c (cs_to_section): Use gdb_bfd_section_index.
7640 * elfread.c (record_minimal_symbol, elf_symtab_read): Use
7641 gdb_bfd_section_index.
7642 * gdb_bfd.c (gdb_bfd_section_index, gdb_bfd_count_sections):
7644 * gdb_bfd.h (gdb_bfd_section_index, gdb_bfd_count_sections):
7646 * machoread.c (macho_symtab_add_minsym, macho_symfile_offsets):
7648 * objfiles.c (add_to_objfile_sections_full): New function.
7649 (add_to_objfile_sections): Use it.
7650 (build_section_table): Rewrite.
7651 (objfile_relocate1): Use gdb_bfd_section_index. Update.
7652 * objfiles.h (obj_section_offset): Use gdb_bfd_section_index.
7653 (struct objfile) <sections>: Update comment.
7654 (ALL_OBJFILE_OSECTIONS): Skip sections where the_bfd_section
7656 (ALL_OBJSECTIONS): Use it.
7657 * solib-dsbt.c (dsbt_relocate_main_executable): Update.
7658 * solib-frv.c (frv_relocate_main_executable): Update.
7659 * solib-target.c (solib_target_relocate_section_addresses):
7660 Use gdb_bfd_section_index.
7661 * symfile.c (build_section_addr_info_from_section_table):
7662 Use gdb_bfd_section_index.
7663 (build_section_addr_info_from_bfd, place_section): Likewise.
7664 * symtab.c (fixup_section): Update.
7665 * xcoffread.c (find_targ_sec): Use gdb_bfd_section_index.
7667 2013-04-08 Tom Tromey <tromey@redhat.com>
7669 * minsyms.h (struct bound_minimal_symbol): New.
7670 (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
7671 Remove objfile argument.
7672 (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
7673 Return bound_minimal_symbol.
7674 * minsyms.c (lookup_minimal_symbol_by_pc_1)
7675 (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
7676 Return bound_minimal_symbol.
7677 (in_gnu_ifunc_stub): Update.
7678 (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
7679 Remove 'objfile_p' argument.
7680 (lookup_solib_trampoline_symbol_by_pc): Update.
7681 * ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c,
7682 arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c,
7683 c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c,
7684 glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c,
7685 i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c,
7686 linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c,
7687 mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c,
7688 ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c,
7689 stack.c, symtab.c, tui/tui-disasm.c: Update.
7691 2013-04-08 Tom Tromey <tromey@redhat.com>
7693 * ada-lang.c (ada_decode_symbol): Check and set 'ada_mangled'.
7694 Use symbol's obstack, not an objfile.
7695 * coffread.c (process_coff_symbol): Update.
7696 * dwarf2read.c (fixup_go_packaging, new_symbol_full): Update.
7697 * jv-lang.c (add_class_symbol): Update.
7698 * mdebugread.c (new_symbol): Update.
7699 * minsyms.c (prim_record_minimal_symbol_full)
7700 (terminate_minimal_symbol_table): Update.
7701 * psymtab.c (add_psymbol_to_bcache): Clear entire symbol. Update.
7702 * stabsread.c (define_symbol, read_enum_type): Update.
7703 * symtab.c (symbol_set_demangled_name, symbol_get_demangled_name):
7704 Handle Ada specially.
7705 (symbol_set_language): Add 'obstack' argument.
7706 (symbol_set_names): Update.
7707 (symbol_natural_name, symbol_demangled_name): Always use
7709 * symtab.h (struct general_symbol_info)
7710 <language_specific::obstack>: New field.
7711 <ada_mangled>: New field.
7712 (SYMBOL_SET_LANGUAGE): Add 'obstack' argument.
7713 (symbol_set_language): Update.
7715 2013-04-08 Tom Tromey <tromey@redhat.com>
7717 * symtab.c (symbol_init_cplus_specific, symbol_set_demangled_name):
7718 Take an obstack, not an objfile.
7719 (symbol_set_names): Update.
7720 * symtab.h (symbol_set_demangled_name): Update.
7722 2013-04-08 Tom Tromey <tromey@redhat.com>
7724 * coffread.c (process_coff_symbol, coff_read_enum_type): Call
7726 * dwarf2read.c (fixup_go_packaging): Call allocate_symbol.
7727 (read_func_scope): Call allocate_template_symbol.
7728 (new_symbol_full): Call allocate_symbol.
7729 * jit.c (finalize_symtab): Call allocate_symbol.
7730 * jv-lang.c (add_class_symbol): Call allocate_symbol.
7731 * mdebugread.c (parse_symbol, new_block): Call allocate_symbol.
7732 * stabsread.c (patch_block_stabs, define_symbol, read_enum_type)
7733 (common_block_end): Call allocate_symbol.
7734 * symtab.c (allocate_symbol, initialize_symbol)
7735 (allocate_template_symbol): New functions.
7736 * symtab.c (allocate_symbol, initialize_symbol)
7737 (allocate_template_symbol): Declare.
7738 * xcoffread.c (process_xcoff_symbol): Call initialize_symbol.
7740 2013-04-08 Pedro Alves <palves@redhat.com>
7741 Keith Seitz <keiths@redhat.com>
7743 * breakpoint.c (create_breakpoint): Rename
7744 "parse_condition_and_thread" parameter to "parse_arg". Update
7745 describing comment. If !PARSE_ARG, then error out if ARG is not
7746 the empty string after extracting the location.
7747 * breakpoint.h (create_breakpoint): Rename
7748 "parse_condition_and_thread" parameter to "parse_arg".
7750 2013-04-08 Aleksandar Ristovski <aristovski@qnx.com
7752 * solib-svr4.c (lm_addr_check): Add const qualifier to 'so' arg.
7754 2013-04-07 Yao Qi <yao@codesourcery.com>
7756 * remote.c (remote_trace_find): Change type of parameters 'addr1'
7757 and 'addr2' to CORE_ADDR.
7758 * target.c (update_current_target): Update.
7759 * target.h (struct target_ops) <to_trace_find>: Change parameter
7761 * tracepoint.c (tfind_1): Change type of parameters 'addr1' and
7762 'addr2' to CORE_ADDR.
7763 (tfile_trace_find): Likewise.
7764 (tfile_get_traceframe_address): Change return type to CORE_ADDR.
7765 Change local variable 'addr' to type CORE_ADDR.
7766 * tracepoint.h (tfind_1): Update declaration.
7768 2013-04-06 Eli Zaretskii <eliz@gnu.org>
7770 * windows-nat.c (windows_get_absolute_argv0): Move from here...
7771 * mingw-hdep.c (windows_get_absolute_argv0): ...to here.
7774 * windows-nat.h (windows_get_absolute_argv0): Move prototype from
7776 * main.h (windows_get_absolute_argv0): ...to here.
7778 2013-04-05 Doug Evans <dje@google.com>
7780 * dwarf2read.c (struct dwarf2_per_objfile): Tweak comment.
7781 (read_cutu_die_from_dwo): Add comments.
7782 (read_structure_type): Update comment.
7783 (read_enumeration_type, read_namespace_type): Update comment.
7784 (read_die_type, get_die_type_at_offset, get_die_type): Update comment.
7786 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
7788 Convert man pages to texinfo, new gdbinit.5 texinfo page.
7789 * Makefile.in (gdb.z): Remove.
7790 (install-only): Remove $(man1dir) and gdb.1 installation.
7793 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
7795 Fix compatibility with Linux kernel 3.8.3.
7796 * linux-tdep.c (linux_find_memory_regions_full): Move variable number
7797 to more inner block. Remove parsing of NUMBER from outer block.
7798 Parse NUMBER only if KEYWORD has been identified.
7800 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
7802 Fix variable name shadowing.
7803 * linux-tdep.c (linux_find_memory_regions_full): Rename outer variable
7804 filename to mapsfilename and update its uses.
7806 2013-04-05 Eli Zaretskii <eliz@gnu.org>
7808 * Makefile.in (TAGS): Avoid warning from etags when $GDB_NM_FILE is
7809 empty. See http://sourceware.org/ml/gdb-patches/2012-08/msg00504.html
7810 and http://sourceware.org/ml/gdb-patches/2013-04/msg00055.html for
7811 details of the problem.
7813 2013-04-04 Pedro Alves <palves@redhat.com>
7814 Hui Zhu <hui@codesourcery.com>
7816 * breakpoint.c (validate_commands_for_breakpoint): If validating a
7817 tracepoint, reset its STEP_COUNT and call validate_actionline.
7819 2013-04-03 Doug Evans <dje@google.com>
7821 * dwarf2read.c (read_die_and_siblings_1): Renamed from
7822 read_die_and_siblings.
7823 (read_die_and_siblings): New function.
7824 (read_cutu_die_from_dwo): Dump die if requested.
7825 (read_die_and_children): Call read_full_die_1 and
7826 read_die_and_siblings_1.
7827 (read_full_die): Dump die if requested.
7829 * dwarf2read.c (read_comp_units_from_section): Add debugging printf.
7831 * dwarf2read.c (struct dwo_file): New member comp_dir.
7832 Rename member name to dwo_name. All uses updated.
7833 (hash_dwo_file): Include comp_dir in computation.
7834 (eq_dwo_file): Ditto.
7835 (lookup_dwo_file_slot): New arg comp_dir. All callers updated.
7836 (create_dwo_in_dwp, lookup_dwo_in_dwp, open_and_init_dwo_file): Ditto.
7838 * psymtab.c (read_psymtabs_with_fullname): Don't call
7839 psymtab_to_fullname if the basenames are different.
7841 2013-04-03 Jan Kratochvil <jan.kratochvil@redhat.com>
7843 * NEWS (Changes in GDB 7.6): Update the data-disassemble for "fullname".
7844 New entry about "fullname" presence.
7846 2013-04-03 Pedro Alves <palves@redhat.com>
7848 * NEWS: Mention x86_64/Cygwin as new native configuration.
7850 2013-04-02 Doug Evans <dje@google.com>
7852 * dwarf2read.c (read_structure_type): Fix typo in comment.
7854 2013-04-02 Pedro Alves <palves@redhat.com>
7856 * NEWS: Mention "set/show debug aarch64", "set/show debug
7857 coff-pe-read" and "set/show debug mach-o".
7859 2013-04-02 Pedro Alves <palves@redhat.com>
7861 * NEWS: Mention "set/show remote trace-buffer-size-packet".
7863 2013-04-02 Eli Zaretskii <eliz@gnu.org>
7865 * Makefile.in (HFILES_NO_SRCDIR): Remove call-cmds.h.
7866 gdb_string.h is now in common/.
7868 2013-04-02 Pedro Alves <palves@redhat.com>
7870 * NEWS: Move "set debug notification" and "set trace-buffer-size"
7871 under "New options".
7873 2013-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
7877 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
7879 2013-04-02 Pedro Alves <palves@redhat.com>
7883 * remote.c (send_interrupt_sequence): Use remote_serial_write.
7884 (remote_serial_write): New function.
7885 (putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write.
7887 2013-04-01 Jiong Wang <jiwang@tilera.com>
7889 * NEWS: Mention TILE-Gx in "New native configurations" and
7890 "New targets" sections.
7892 2013-04-01 Doug Evans <dje@google.com>
7894 * dwarf2read.c (lookup_signatured_type_at_offset): Delete.
7895 (process_enumeration_scope): Simplify.
7897 * dwarf2read.c (struct dwarf2_per_cu_data): Move member
7899 (struct signatured_type): ... to here.
7900 (sig_type_ptr): New typedef.
7901 (type_unit_group): Delete member 't.first_cu'. Move member 'tus'
7902 out of union 't'. All uses updated.
7903 (dw2_get_file_names_reader): Assert not called for a type unit.
7904 (dw2_get_file_names): Assert not called for a type unit or type
7906 (build_type_psymtabs_reader): Assert called for a type unit.
7907 (build_type_psymtab_dependencies): Assert called for a type unit group.
7909 * dwarf2read.c (free_dwo_file): Add comment.
7910 (dwarf2_per_objfile_free): Unref dwp bfd.
7912 2013-04-01 Aleksandar Ristovski <aristovski@qnx.com>
7914 * coff-pe-read.c (add_pe_exported_sym): Remove unused 'dll_name_len'.
7915 (add_pe_forwarded_sym): Remove unused 'section', 'dll_name_len'.
7916 (read_pe_exported_syms): Remove unused 'exportix'.
7917 (pe_text_section_offset): Remove unused 'opthdr_ofs', 'num_entries',
7918 'export_rva', 'export_size', 'expptr', 'exp_funcbase', 'expdata',
7919 'erva', 'name_rvas', 'ordinals', 'nexp', 'ordbase', 'dll_name'.
7921 2013-04-01 Aleksandar Ristovski <aristovski@qnx.com>
7923 * breakpoint.c (parse_cond_to_aexpr): Remove unused 'old_chain'.
7924 (print_it_watchpoint): Remove unused 'bl'.
7925 (say_where): Remove unused 'uiout'.
7926 (bpstat_remove_breakpoint_callback): Remove unused 'uiout'.
7927 (bkpt_breakpoint_hit): Remove unused 'b'.
7928 (internal_bkpt_print_it): Remove unused 'uiout'.
7929 * buildsym.c (augment_type_symtab): Remove unused 'i'.
7931 2013-03-31 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
7933 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_float): New function.
7934 (ppc64_sysv_abi_push_dummy_call): Handle complex arguments.
7936 2013-03-29 Doug Evans <dje@google.com>
7938 * dwarf2read.c (open_dwo_file): Renamed from open_dwop_file.
7939 Delete arg is_dwp. All callers updated.
7940 (open_dwp_file): New function.
7941 (open_and_init_dwp_file): Call it.
7942 (get_dwp_file): New function.
7943 (lookup_dwo_cutu): Call it.
7945 * dwarf2read.c (open_and_init_dwp_file): Remove incorrect, and
7946 unnecessary, cleanup.
7948 * dwarf2read.c (lookup_dwo_cutu): Improve complaint text.
7950 * dwarf2read.c (read_cutu_die_from_dwo): New function.
7951 (lookup_dwo_unit): New function.
7952 (init_cutu_and_read_dies): Move DWO handling to new functions.
7954 * dwarf2read.c (struct signatured_type): Tweak comment.
7955 (struct dwo_unit): Tweak comment.
7956 (create_debug_types_hash_table): Tweak comment. Reformat long line.
7957 (create_dwo_debug_info_hash_table): Tweak comment.
7958 (dwarf2_per_cu_offset_and_type): Tweak comment.
7960 * dwarf2read.c (lookup_signatured_type): Remove complaint about
7961 missing .debug_types section.
7963 2013-03-29 Yao Qi <yao@codesourcery.com>
7965 * corelow.c: Include "completer.h".
7966 (_initialize_corelow): Call add_target_with_completer with
7967 argument 'filename_completer'.
7968 * tracepoint.c: Likewise.
7969 * exec.c (_initialize_exec): Likewise.
7970 * target.c (add_target): Rename to ...
7971 (add_target_with_completer): ... this. Call set_cmd_completer
7972 if parameter completer is not NULL.
7974 * target.h: Include "command.h".
7975 (add_target_with_completer): Declare it.
7977 2013-03-28 Joel Brobecker <brobecker@adacore.com>
7979 * coffread.c (is_import_fixup_symbol): New function.
7980 (record_minimal_symbol): Use is_import_fixup_symbol to
7981 detect import fixup symbols, and discard them.
7983 2013-03-28 Doug Evans <dje@google.com>
7985 * dwarf2read.c (create_debug_types_hash_table): Don't allocate the
7986 types hash table until we know we need it.
7988 * dwarf2read.c (create_addrmap_from_index): Complain about bad CU
7991 * dwarf2read.c (dw2_get_file_names): Delete arg "objfile".
7992 All callers updated.
7993 (dw2_print_stats): Print #read CUs too.
7994 (dump_die_shallow): Print signatured types better.
7996 * dwarf2read.c (struct dwarf2_per_cu_data): Rename member
7997 info_or_types_section to section. All uses updated.
7998 (struct dwo_unit): Ditto.
8000 2013-03-28 Pedro Alves <palves@redhat.com>
8002 * NEWS (New options): New section.
8003 (New options): Mention set/show remote trace-status-packet.
8004 * remote.c (PACKET_qTStatus): New enumeration value.
8005 (remote_get_trace_status): Skip sending qTStatus if the packet is
8006 disabled. Use packet_ok.
8007 (_initialize_remote): Register a configuration command for
8010 2013-03-28 Doug Evans <dje@google.com>
8012 * symfile.c (find_separate_debug_file): Add comment.
8013 (terminate_after_last_dir_separator): Tweak comment.
8015 * dwarf2read.c (create_partial_symtab): Add forward decl.
8016 (create_partial_symtab): Move to be closer to other psymtab functions.
8017 (process_psymtab_comp_unit_reader, process_psymtab_comp_unit): Ditto.
8019 * dwarf2read.c (dwarf2_physname): Move declaration to better spot.
8020 (compute_symtab_includes): Remove unnecessary forward declaration.
8021 (die_needs_namespace): Add comment marking group of functions for
8022 dwarf2 name computation.
8024 * typeprint.c (_initialize_typeprint): Improve type help text.
8026 * python/python.c (finish_python_initialization): Provide suggestion
8027 for how to tell gdb to find its python files.
8029 2013-03-28 Pedro Alves <palves@redhat.com>
8033 * source.c (_initialize_source): Change back "set listsize" to an
8036 2013-03-27 Gareth McMullin <gareth@blacksphere.co.nz>
8039 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
8041 2013-03-27 Pedro Alves <palves@redhat.com>
8043 * top.c (history_size): Rename to ...
8044 (history_size_setshow_var): ... this. Add comment.
8045 (show_commands): Use readline's 'history_length' instead of
8046 computing the history length by calling history_get in a loop.
8047 (set_history_size_command): Error out for sizes over INT_MAX.
8048 Restore previous history size on invalid size.
8049 (init_history): If HISTSIZE is negative, leave the history size as
8051 (init_main): Adjust.
8053 2013-03-27 Pedro Alves <palves@redhat.com>
8055 * coff-pe-read.c (_initialize_coff_pe_read): Rename "set debug
8056 coff_pe_read" command to "set debug coff-pe-read".
8058 2013-03-27 Markus Metzger <markus.t.metzger@intel.com>
8060 * record.c (command_size_to_target_size): Fix size comparison.
8061 Change parameter type from pointer to integer to integer.
8064 2013-03-27 Pierre Muller <muller@sourceware.org>
8066 * windows-nat.c (handle_output_debug_string): Avoid typecast
8067 from integer of different size warning.
8069 2013-03-26 Joel Brobecker <brobecker@adacore.com>
8071 * windows-nat.c (handle_output_debug_string): Add empty line
8072 after local block variable definition.
8074 2013-03-26 Pedro Alves <palves@redhat.com>
8076 * ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
8077 (net_open): Make 'polls' local unsigned.
8079 2013-03-26 Pedro Alves <palves@redhat.com>
8081 * remote.c (_initialize_remote): Make "set remoteaddresssize"
8082 a zuinteger command instead of uinteger.
8084 2013-03-26 Pedro Alves <palves@redhat.com>
8086 * record-full.c (record_full_insn_num): Make it unsigned.
8087 (record_full_check_insn_num, record_full_message)
8088 (record_full_registers_change, record_full_xfer_partial): Remove
8089 record_full_insn_max_num check (it's always != 0).
8090 (record_full_info, record_full_restore): Use %u as format string.
8091 (): Use %u as format string.
8092 (set_record_full_insn_max_num): Remove record_full_insn_max_num
8093 check (it's always != 0).
8095 2013-03-26 Pedro Alves <palves@redhat.com>
8097 * dcache.c (_initialize_dcache): Make the "set dcache line-size"
8098 and "set dcache size" commands zuinteger instead of uinteger.
8100 2013-03-26 Pedro Alves <palves@redhat.com>
8102 * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
8103 command zuinteger instead of uinteger.
8105 2013-03-26 Pedro Alves <palves@redhat.com>
8107 * coff-pe-read.c (_initialize_coff_pe_read): Make the command
8108 zuinteger instead of uinteger.
8110 2013-03-26 Pedro Alves <palves@redhat.com>
8112 * record.c (record_insn_history_size_setshow_var)
8113 (record_call_history_size_setshow_var): New globals.
8114 (command_size_to_target_size): New function.
8115 (cmd_record_insn_history, cmd_record_call_history): Use
8116 command_size_to_target_size instead of cast.
8117 (validate_history_size, set_record_insn_history_size)
8118 (set_record_call_history_size): New functions.
8119 (_initialize_record): Install set_record_insn_history_size and
8120 set_record_call_history_size as "set" hooks of "set record
8121 instruction-history-size" and "set record
8122 function-call-history-size".
8124 2013-03-26 Pedro Alves <palves@redhat.com>
8126 * top.c (gdb_rl_operate_and_get_next): Replace max_input_history
8127 use with history_max_entries use. Remove FIXME note.
8129 2013-03-26 Markus Metzger <markus.t.metzger@intel.com>
8131 * record-btrace.c (record_btrace_close): Call
8132 record_btrace_auto_disable.
8134 2013-03-25 Joel Brobecker <brobecker@adacore.com>
8136 * rs6000-nat.c (fixup_breakpoints): Delete declaration.
8138 2013-03-25 Doug Evans <dje@google.com>
8140 * contrib/cc-with-tweaks.sh: Check exit code of dwp.
8142 2013-03-25 Tom Tromey <tromey@redhat.com>
8145 * c-exp.y (exp): Add new productions for destructors after '.' and
8147 (write_destructor_name): New function.
8149 2013-03-25 Tom Tromey <tromey@redhat.com>
8152 * opencl-lang.c (evaluate_subexp_opencl) <STRUCTOP_STRUCT>: Use
8153 value_struct_elt, not lookup_struct_elt_type.
8154 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
8155 STRUCTOP_PTR>: Use value_struct_elt, not lookup_struct_elt_type.
8156 * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment.
8158 2013-03-25 Yao Qi <yao@codesourcery.com>
8160 * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir'
8161 instead of '_mkdir'.
8163 2013-03-23 Eli Zaretskii <eliz@gnu.org>
8165 * windows-nat.c (windows_get_absolute_argv0): New function.
8166 * windows-nat.h: Add its prototype.
8168 * main.c (get_init_files): Use filename_ncmp instead of strncmp.
8169 Use IS_DIR_SEPARATOR instead of looking for a character inside
8170 SLASH_STRING. Include filenames.h.
8171 (captured_main) [__MINGW32__]: Make argv[0] absolute, so that
8172 relocate_gdb_directory works when passed gdb_program_name.
8173 Include windows-nat.h.
8175 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
8177 * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
8178 * remote.c (trace_error): Remove the special handling of '2'.
8179 (readchar) <SERIAL_EOF>
8180 (readchar) <SERIAL_ERROR>
8181 (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
8182 (remote_get_trace_status): Call throw_exception if EX is
8184 * utils.c (perror_with_name): Rename to ...
8185 (throw_perror_with_name): ... here. New parameter errcode, describe it
8186 in the function comment.
8187 (perror_with_name): New function wrapper.
8188 * utils.h (enum errors): New stub declaration.
8189 (throw_perror_with_name): New declaration.
8191 2013-03-22 Pedro Alves <palves@redhat.com>
8192 Yao Qi <yao@codesourcery.com>
8193 Mark Kettenis <kettenis@gnu.org>
8195 * cli/cli-setshow.c (do_set_command) <var_uinteger>:
8196 Don't let the user set the value to UINT_MAX directly.
8197 <var_integer>: Don't let the user set the value to INT_MAX
8200 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
8202 * remote.c (remote_unpush_target): New function.
8203 (remote_open_1): Remove two pop_target calls, update one comment, add
8204 comment to target_preopen call. Replace pop_target call by
8205 remote_unpush_target call.
8206 (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
8207 pop_target calls by remote_unpush_target calls.
8209 2013-03-22 Pedro Alves <palves@redhat.com>
8211 * linux-nat.c (linux_child_follow_fork): Don't call
8212 linux_enable_event_reporting.
8213 (linux_handle_extended_wait): Don't call
8214 linux_enable_event_reporting.
8216 2013-03-22 Pedro Alves <palves@redhat.com>
8218 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
8219 use it to rewrite the trampoline buffers with type gdb_byte[], and
8220 undefine the macro. Remove char* cast.
8222 2013-03-21 Doug Evans <dje@google.com>
8224 New commands "mt set per-command {space,time,symtab} {on,off}".
8226 * event-top.c: #include "maint.h".
8227 * main.c: #include "maint.h".
8228 * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
8229 timeval-utils.h, maint.h, cli/cli-setshow.h.
8230 (per_command_time, per_command_space): New static globals.
8231 (per_command_symtab): New static global.
8232 (per_command_setlist, per_command_showlist): New static globals.
8233 (struct cmd_stats): Move here from utils.c.
8234 (set_per_command_time): Renamed from set_display_time in utils.c
8235 and moved here. All callers updated.
8236 (set_per_command_space): Renamed from set_display_space in utils.c
8237 and moved here. All callers updated.
8238 (count_symtabs_and_blocks): New function.
8239 (report_command_stats): Moved here from utils.c. Add support for
8240 printing symtab stats. Only print data if enabled before command
8242 (make_command_stats_cleanup): Ditto.
8243 (sert_per_command_cmd, show_per_command_cmd): New functions.
8244 (_initialize_maint_cmds): Add new commands
8245 mt set per-command {space,time,symtab} {on,off}.
8246 * maint.h: New file.
8247 * top.c: #include "maint.h".
8248 * utils.c (reset_prompt_for_continue_wait_time): New function.
8249 (get_prompt_for_continue_wait_time): New function.
8250 * utils.h (reset_prompt_for_continue_wait_time): Declare
8251 (get_prompt_for_continue_wait_time): Declare.
8252 (make_command_stats_cleanup): Moved to maint.h.
8253 (set_display_time, set_display_space): Moved to maint.h and renamed
8254 to set_per_command_time, set_per_command_space.
8255 * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
8256 parse_binary_operation and made non-static. Don't call error,
8257 just return an error marker. All callers updated.
8258 * cli/cli-setshow.h (parse_cli_boolean_value): Declare.
8260 2013-03-21 Tom Tromey <tromey@redhat.com>
8262 * symfile.c (alloc_section_addr_info): Update header. Don't set
8263 'num_sections' field.
8264 (build_section_addr_info_from_section_table): Set 'num_sections'.
8265 (build_section_addr_info_from_bfd): Likewise.
8266 (build_section_addr_info_from_objfile): Remove dead loop
8268 (free_section_addr_info): Unconditionally call xfree.
8269 (relative_addr_info_to_section_offsets, addrs_section_sort)
8270 (addr_info_make_relative, syms_from_objfile_1): Remove dead loop
8272 (syms_from_objfile_1): Remove dead 'if' condition. Check
8274 (add_symbol_file_command): Set 'num_sections'.
8275 * symfile-mem.c (symbol_file_add_from_memory): Set
8277 * somread.c (som_symfile_offsets): Remove dead loop condition.
8278 * machoread.c (macho_symfile_offsets): Remove dead 'if'.
8279 * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'.
8281 2013-03-21 Tom Tromey <tromey@redhat.com>
8283 * tracepoint.h (decode_agent_options): Add 'trace_string'
8285 * tracepoint.c (decode_agent_options): Add 'trace_string'
8287 (validate_actionline): Update.
8288 (collect_symbol): Add 'trace_string' argument.
8289 (struct add_local_symbols_data) <trace_string>: New field.
8290 (do_collect_symbol): Update.
8291 (add_local_symbols): Add 'trace_string' argument.
8292 (encode_actions_1): Update.
8293 (trace_dump_actions): Update.
8294 * dwarf2loc.c (access_memory): Update.
8295 * ax.h (struct agent_expr) <tracing, trace_string>: New fields.
8296 * ax-general.c (new_agent_expr): Update.
8297 * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
8298 (gen_trace_for_return_address): Add argument.
8299 (trace_kludge, trace_string_kludge): Remove.
8300 * ax-gdb.c (trace_kludge, trace_string_kludge): Remove.
8301 (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update.
8302 (gen_trace_for_var): Add 'trace_string' argument.
8303 (gen_trace_for_expr, gen_trace_for_return_address): Likewise.
8304 (gen_printf, agent_eval_command_one): Update.
8306 2013-03-21 Tom Tromey <tromey@redhat.com>
8309 * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
8310 Handle FILENAME token.
8312 2013-03-21 Tom Tromey <tromey@redhat.com>
8314 * c-exp.y (YYPRINT): Define.
8315 (c_print_token): New function.
8317 2013-03-21 Tom Tromey <tromey@redhat.com>
8319 * c-exp.y (%union) <sym, ivar, ivec>: Remove.
8321 2013-03-21 Yao Qi <yao@codesourcery.com>
8323 * ctf.c: Include "gdb_stat.h".
8324 [USE_WIN32API]: New macro 'mkdir'.
8325 (ctf_start): Use permission bits macros if they are defined.
8327 2013-03-20 Keith Seitz <keiths@redhat.com>
8329 * breakpoint.h (struct breakpoint): Add comment to
8330 extra_string indicating that this member is mallod'd.
8331 * breakpoint.c (base_breakpoint_dtor): Free extra_string.
8333 2013-03-20 Pedro Alves <palves@redhat.com>
8337 * cli/cli-setshow.c (do_set_command)
8338 <var_uinteger, var_zuinteger>: Use LONGEST for variable holding
8339 the result of parsing the command argument. Throw error if the
8340 value is greater than UINT_MAX. Print the invalid value with
8342 <var_integer, var_zinteger>: Use LONGEST for variable holding the
8343 result of parsing the command argument. Throw error if the value
8344 is greater than INT_MAX, not greater or equal. Also throw error
8345 if the value is less than INT_MIN. Print the invalid value with
8347 <var_zuinteger_unlimited>: Throw error if the value is greater
8348 than INT_MAX, not greater or equal.
8349 (do_show_command) <var_integer, var_zinteger,
8350 var_zuinteger_unlimited>: Use %d for printing int, not %u.
8352 2013-03-20 Tom Tromey <tromey@redhat.com>
8354 * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops,
8356 * dwarf2read.c (read_func_scope): Remove old FIXME.
8357 * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
8359 * findvar.c (symbol_read_needs_frame, default_read_var_value):
8360 Unconditionally call via computed ops, if possible.
8361 * printcmd.c (address_info): Unconditionally call via computed ops,
8363 * stack.c (read_frame_arg): Unconditionally call via computed ops,
8365 * symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
8366 * tracepoint.c (scope_info): Unconditionally call via computed ops,
8369 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
8370 Tom Tromey <tromey@redhat.com>
8373 * coffread.c (coff_register_index): New global.
8374 (process_coff_symbol, coff_read_enum_type): Set
8375 SYMBOL_ACLASS_INDEX.
8376 (_initialize_coffread): Initialize new global.
8377 * dwarf2loc.c (locexpr_find_frame_base_location)
8378 (dwarf2_block_frame_base_locexpr_funcs)
8379 (loclist_find_frame_base_location)
8380 (dwarf2_block_frame_base_loclist_funcs): New.
8381 (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error.
8382 (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist.
8383 * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs)
8384 (dwarf2_block_frame_base_loclist_funcs): New.
8385 * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index)
8386 (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New
8388 (read_func_scope): Update.
8389 (fixup_go_packaging, mark_common_block_symbol_computed)
8390 (var_decode_location, new_symbol_full, dwarf2_const_value):
8391 Set SYMBOL_ACLASS_INDEX.
8392 (dwarf2_symbol_mark_computed): Likewise. Add 'is_block' argument.
8393 (_initialize_dwarf2_read): Initialize new globals.
8394 * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX.
8395 * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX.
8396 * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New
8398 (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX.
8399 (_initialize_mdebugread): Initialize new globals.
8400 * psympriv.h (struct partial_symbol) <aclass>: Update comment.
8401 * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX.
8402 (stab_register_index, stab_regparm_index): New globals.
8403 (define_symbol, read_enum_type, common_block_end): Set
8404 SYMBOL_ACLASS_INDEX.
8405 (_initialize_stabsread): Initialize new globals.
8406 * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New
8408 (MAX_SYMBOL_IMPLS): New define.
8409 (register_symbol_computed_impl, register_symbol_block_impl)
8410 (register_symbol_register_impl)
8411 (initialize_ordinary_address_classes): New functions.
8412 (_initialize_symtab): Call initialize_ordinary_address_classes.
8413 * symtab.h (enum address_class) <LOC_FINAL_VALUE>: New constant.
8414 (struct symbol_impl): New.
8415 (SYMBOL_ACLASS_BITS): New define.
8416 (struct symbol) <aclass, ops>: Remove fields.
8417 <aclass_index>: New field.
8418 (symbol_impls): Declare.
8419 (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine.
8420 (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines.
8421 (register_symbol_computed_impl, register_symbol_block_impl)
8422 (register_symbol_register_impl): Declare.
8423 (struct symbol_computed_ops): Add location_has_loclist.
8424 (struct symbol_block_ops): New.
8425 (SYMBOL_BLOCK_OPS): New.
8426 * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX.
8428 2013-03-20 Tom Tromey <tromey@redhat.com>
8430 * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
8431 (print_partial_symbols, recursively_search_psymtabs): Use
8434 2013-03-20 Pierre Muller <muller@sourceware.org>
8436 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
8437 addtion, subtraction, multiplication and division binary operator.
8439 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
8442 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
8443 * bsd-kvm.c (bsd_kvm_close): Likewise.
8444 * bsd-uthread.c (bsd_uthread_close): Likewise.
8445 * corelow.c (core_close): Likewise.
8446 (core_close_cleanup): Remove parameter quitting from a caller.
8447 * event-top.c (async_disconnect): Likewise.
8448 * exec.c (exec_close_1): Remove parameter quitting.
8449 * go32-nat.c (go32_close): Likewise.
8450 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
8451 parameter quitting from a caller.
8452 * mips-linux-nat.c (super_close): Remove parameter quitting from the
8454 (mips_linux_close): Remove parameter quitting. Remove parameter
8455 quitting from a caller.
8456 * monitor.c (monitor_close): Remove parameter quitting.
8457 * monitor.h (monitor_close): Likewise.
8458 * record-btrace.c (record_btrace_close): Likewise.
8459 * record-full.c (record_full_close): Likewise.
8460 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
8461 it also from fprintf_unfiltered.
8462 * remote-mips.c (mips_close): Remove parameter quitting.
8463 (mips_detach): Remove parameter quitting from a caller.
8464 * remote-sim.c (gdbsim_close): Remove parameter quitting.
8465 (gdbsim_close): Remove duplicate function comment. Remove parameter
8466 quitting and remove it also from printf_filtered.
8467 * remote.c (remote_close): Remove parameter quitting.
8468 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
8469 * target.c (update_current_target): Remove parameter int from to_close
8471 (push_target, unpush_target, pop_target): Remove parameter quitting from
8473 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
8474 Remove parameter quitting from a caller.
8475 (target_preopen): Remove parameter quitting from a caller.
8476 (target_close): Remove parameter quitting. Remove parameter quitting
8477 from a caller two times. Remove parameter quitting also from
8479 * target.h (struct target_ops): Remove parameter quitting and as int
8480 from fields to_xclose and to_close.
8481 (extern struct target_ops current_target):
8482 (target_close, pop_all_targets): Remove parameter quitting. Update the
8484 (pop_all_targets_above): Remove parameter quitting.
8485 * top.c (quit_target): Remove parameter quitting from a caller.
8486 * tracepoint.c (tfile_close): Remove parameter quitting.
8487 * windows-nat.c (windows_close): Remove parameter quitting.
8489 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
8491 * windows-nat.c (handle_output_debug_string): Replace call
8492 to string_to_core_addr with call to strtoull.
8494 2013-03-20 Yao Qi <yao@codesourcery.com>
8496 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
8497 and write it to CTF metadata.
8499 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
8501 * windows-nat.c (handle_output_debug_string): Change type of n to
8502 SIZE_T to avoid crash on 64 bit systems.
8504 2013-03-17 Eli Zaretskii <eliz@gnu.org>
8506 * python/python-internal.h (HAVE_SNPRINTF)
8507 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
8508 about redefinition of snprintf by pyerrors.h.
8510 2013-03-15 Steve Ellcey <sellcey@mips.com>
8512 * remote-sim.c (sim_command_completer): Make char arguments const.
8514 2013-03-15 Tom Tromey <tromey@redhat.com>
8517 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
8519 2013-03-14 Tom Tromey <tromey@redhat.com>
8521 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
8523 (get_file_crc): Move from symfile.c.
8524 (gdb_bfd_crc): New function.
8525 * gdb_bfd.h (gdb_bfd_crc): Declare.
8526 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
8527 * symfile.c (get_file_crc): Move to gdb_bfd.c.
8528 (separate_debug_file_exists): Use gdb_bfd_crc.
8530 2013-03-14 Tom Tromey <tromey@redhat.com>
8532 * symfile.c (get_debug_link_info): Remove.
8533 (find_separate_debug_file_by_debuglink): Use
8534 bfd_get_debug_link_info.
8536 2013-03-14 Tom Tromey <tromey@redhat.com>
8538 * symtab.c (error_in_psymtab_expansion): New function.
8539 (lookup_symbol_aux_quick)
8540 (basic_lookup_transparent_type_quick): Remove "last resort"
8541 code. Use error_in_psymtab_expansion.
8543 2013-03-14 Doug Evans <dje@google.com>
8544 Jan Kratochvil <jan.kratochvil@redhat.com>
8546 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
8547 any successful compare_filenames_for_search or FILENAME_CMP.
8548 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
8549 * symtab.c (iterate_over_some_symtabs): Likewise.
8551 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8553 * source.c (print_source_lines_base): Make a local copy of
8556 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
8557 Jan Kratochvil <jan.kratochvil@redhat.com>
8559 * source.c (print_source_lines_base): Suppress "file" for TUI.
8561 2013-03-14 Keith Seitz <keiths@redhat.com>
8562 Alan Matsuoka <alanm@redhat.com>
8566 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
8568 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
8571 2013-03-14 Yao Qi <yao@codesourcery.com>
8573 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
8574 status to tfile if trace is stopped by command 'tstop'.
8576 2013-03-14 Yao Qi <yao@codesourcery.com>
8578 * tracepoint.c (tfile_write_status): Write trace notes and user
8579 name into tfile if they are not NULL.
8581 2013-03-14 Hui Zhu <hui@codesourcery.com>
8582 Yao Qi <yao@codesourcery.com>
8584 * Makefile.in (REMOTE_OBS): Add ctf.o.
8585 (SFILES): Add ctf.c.
8586 (HFILES_NO_SRCDIR): Add ctf.h.
8587 * ctf.c, ctf.h: New files.
8588 * tracepoint.c: Include 'ctf.h'.
8589 (collect_pseudocommand): Remove static.
8590 (trace_save_command): Parse option "-ctf".
8591 Produce different trace file writers per option.
8592 Adjust output message.
8593 (trace_save_tfile, trace_save_ctf): New.
8594 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
8595 * mi/mi-main.c: Include 'ctf.h'.
8596 (mi_cmd_trace_save): Handle option '-ctf'. Call either
8597 trace_save_tfile or trace_save_ctf.
8598 * NEWS: Mention these changes.
8600 2013-03-14 Yao Qi <yao@codesourcery.com>
8602 * tracepoint.c (trace_file_writer_xfree): New.
8603 (struct tfile_writer_data): New.
8604 (tfile_dtor, tfile_can_target_save, tfile_start): New.
8605 (tfile_write_header, tfile_write_regblock_type): New.
8606 (tfile_write_status, tfile_write_uploaded_tsv): New.
8607 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
8608 (tfile_write_raw_data, (tfile_end): New.
8609 (tfile_write_ops): New global variable.
8610 (TRACE_WRITE_R_BLOCK): New macro.
8611 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
8612 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
8613 (TRACE_WRITE_V_BLOCK): New macro.
8614 (trace_save): Add extra one parameter WRITER. Make it static.
8615 Use WRITER to writer trace.
8616 (tfile_trace_file_writer_new): New.
8617 (trace_save_command): Caller update.
8618 (trace_save_tfile): Write trace data in TFILE format.
8619 * tracepoint.h (struct trace_frame_write_ops): New.
8620 (struct trace_file_write_ops): New.
8621 (struct trace_file_writer): New.
8622 (trace_save): Remove its declaration.
8623 (trace_save_tfile): Declare it.
8624 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
8625 instead of trace_save.
8627 2013-03-13 Pedro Alves <palves@redhat.com>
8629 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
8631 2013-03-13 Pedro Alves <palves@redhat.com>
8633 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
8635 * demangle.c (current_demangling_style_string): Make it const.
8636 (set_demangling_command): Assert the demangling style is known.
8637 Remove all handling of unknown styles. Set
8638 'current_demangling_style_string' to an element of the
8639 demangling_style_names array.
8640 (set_demangling_style): Delete.
8641 (_initialize_demangler): Set current_demangling_style_string to the
8642 element of the demangling_style_names array that corresponds to
8643 the default demangling style. Remove FIXME note. Don't call
8644 set_demangling_style.
8645 * gdb-demangle.h (set_demangling_style): Remove declaration.
8647 2013-03-13 Pedro Alves <palves@redhat.com>
8649 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
8651 (ada_make_symbol_completion_list): Make "text0" parameter const.
8652 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
8653 * breakpoint.c (condition_completer): Make "text" and "word"
8654 parameters const. Adjust.
8655 (check_tracepoint_command): Adjust to validate_actionline
8657 (catch_syscall_completer): Make "text" and "word" parameters
8659 * cli/cli-cmds.c (show_user): Make "comname" local const.
8660 (valid_command_p): Make "command" parameter const.
8661 (alias_command): Make "alias_prefix" and "command_prefix" locals
8663 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
8664 (add_alias_cmd): Make "name" and "oldname" parameters const.
8665 Adjust. No longer make copy of OLDNAME.
8666 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
8667 (add_setshow_cmd_full, add_setshow_enum_cmd)
8668 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
8669 (add_setshow_filename_cmd, add_setshow_string_cmd)
8670 (add_setshow_string_noescape_cmd)
8671 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
8672 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
8673 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
8674 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
8675 Make "name" parameter const.
8676 (help_cmd): Rename "command" parameter to "arg". New const local
8678 (find_cmd): Make "command" parameter const.
8679 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
8680 deprecated_cmd_warning prototype change.
8681 (undef_cmd_error): Make "cmdtype" parameter const.
8682 (lookup_cmd): Make "line" parameter const.
8683 (deprecated_cmd_warning): Change type of "text" parameter to
8684 pointer to const char, from pointer to pointer to char. Adjust.
8685 (lookup_cmd_composition): Make "text" parameter const.
8686 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
8688 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
8690 * cli/cli-script.c (validate_comname): Make "tem" local const.
8691 (define_command): New const local "tem_c". Use it in calls to
8693 (document_command): Make "tem" and "comfull" locals const.
8694 (show_user_1): Make "prefix" and "name" parameters const.
8695 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
8697 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
8698 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
8699 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
8700 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
8701 (complete_on_enum, add_setshow_enum_cmd)
8702 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
8703 (add_setshow_filename_cmd, add_setshow_string_cmd)
8704 (add_setshow_string_noescape_cmd)
8705 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
8706 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
8707 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
8708 Change prototypes, constifying strings.
8709 * completer.c (noop_completer, filename_completer): Make "text"
8710 and "prefix" parameters const.
8711 (location_completer, expression_completer)
8712 (complete_line_internal): Make "text" and "prefix" parameters
8714 (command_completer, signal_completer): Make "text" and "prefix"
8716 * completer.h (noop_completer, filename_completer)
8717 (expression_completer, location_completer, command_completer)
8718 (signal_completer): Change prototypes.
8719 * corefile.c (complete_set_gnutarget): Make "text" and "word"
8721 * cp-abi.c (cp_abi_completer): Likewise.
8722 * expression.h (parse_expression_for_completion): Change
8724 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
8726 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
8727 * infrun.c (handle_completer): Make "text" and "word" parameters
8729 * interps.c (interpreter_completer): Make "text" and "word"
8731 * language.h (struct language_defn)
8732 <la_make_symbol_completion_list>: Make "text" and "word"
8734 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
8735 (parse_exp_in_context): Rename to ...
8736 (parse_exp_in_context_1): ... this.
8737 (parse_exp_in_context): Reimplement, with const hack from
8739 (parse_expression_for_completion): Make "string" parameter const.
8740 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
8741 to pointer to const char. Adjust.
8742 (print_command_1): Make "exp" parameter const.
8743 (output_command): Rename to ...
8744 (output_command_const): ... this. Make "exp" parameter const.
8745 (output_command): Reimplement.
8746 (x_command): Adjust.
8747 (display_command): Rename "exp" parameter to "arg". New "exp"
8748 local, const version of "arg".
8749 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
8750 "cmd_name" local const.
8751 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
8753 (cmdpy_completer): Make "text" and "word" parameters const.
8754 (gdbpy_parse_command_name): Make "prefix_text2" local const.
8755 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
8757 * remote.c (_initialize_remote): Make "cmd_name" local const.
8758 * symtab.c (language_search_unquoted_string): Make "text" and "p"
8759 parameters const. Adjust.
8760 (completion_list_add_fields): Make "sym_text", "text" and "word"
8762 (struct add_name_data) <sym_text, text, word>: Make fields const.
8763 (default_make_symbol_completion_list_break_on): Make "text" and
8764 "word" parameters const. Adjust locals.
8765 (default_make_symbol_completion_list)
8766 (make_symbol_completion_list, make_symbol_completion_type)
8767 (make_symbol_completion_list_fn): Make "text" and "word"
8769 (make_file_symbol_completion_list): Make "text", "word" and
8770 "srcfile" parameters const. Adjust locals.
8771 (add_filename_to_list): Make "text" and "word" parameters const.
8772 (struct add_partial_filename_data) <text, word>: Make fields
8774 (make_source_files_completion_list): Make "text" and "word"
8776 * symtab.h (default_make_symbol_completion_list_break_on)
8777 (default_make_symbol_completion_list, make_symbol_completion_list)
8778 (make_symbol_completion_type enum type_code)
8779 (make_symbol_completion_list_fn make_file_symbol_completion_list)
8780 (make_source_files_completion_list): Change prototype.
8781 * top.c (execute_command): Adjust to pass pointer to pointer to
8782 const char to lookup_cmd, and to deprecated_cmd_warning prototype
8784 (set_verbose): Make "cmdname" local const.
8785 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
8787 (validate_actionline): Make "line" parameter a pointer to const
8789 (encode_actions_1): Make "action_exp" local const, and adjust.
8790 (encode_actions): Adjust.
8791 (replace_comma): Delete.
8792 (trace_dump_actions): Make "action_exp" and "next_comma" locals
8793 const, and adjust. Don't frob the action string while splitting
8794 it at commas. Instead, make a copy of each split substring in
8796 (trace_dump_command): Adjust to validate_actionline prototype
8798 * tracepoint.h (decode_agent_options, decode_agent_options)
8799 (encode_actions, validate_actionline): Change prototypes.
8800 * valprint.h (output_command): Delete declaration.
8801 (output_command_const): Declare.
8802 * value.c (function_destroyer): Cast const away in xfree call.
8804 2013-03-13 Pedro Alves <palves@redhat.com>
8806 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
8807 rather than casting 'const char * const *' to 'const char **'.
8808 * ada-lex.l (processInt): Make "trailer" local const. Remove
8809 'const char **' cast.
8810 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
8811 locals, and use those as strtol output pointer, instead than doing
8812 invalid casts to from 'const char **' to 'char **'.
8813 (_initialize_demangle): Remove cast.
8814 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
8815 locals, and use those as strtol output pointer, instead than doing
8816 invalid casts to from 'const char **' to 'char **'.
8817 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
8819 * stap-probe.c (stap_parse_register_operand)
8820 (stap_parse_single_operand): Likewise.
8822 2013-03-13 Yao Qi <yao@codesourcery.com>
8824 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
8825 the last matched 'V' blcok in trace frame.
8827 2013-03-12 Joel Brobecker <brobecker@adacore.com>
8829 * NEWS: Create a new section for the next release branch.
8830 Rename the section of the current branch, now that it has
8833 2013-03-12 Joel Brobecker <brobecker@adacore.com>
8835 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
8836 * version.in: Bump version to 7.6.50.20130312-cvs.
8838 2013-03-12 Keith Seitz <keiths@redhat.com>
8840 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
8841 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
8842 Remove temporary copy of input string.
8843 (mi_execute_command_wrapper): Make "cmd" const.
8844 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
8845 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
8847 (mi_parse): Make "cmd" const.
8849 * mi/mi-parse.h (mi_parse): Make "cmd" const.
8851 2013-03-12 Keith Seitz <keiths@redhat.com>
8853 * ada-lang.c (ada_read_renaming_var_value): Pass const
8854 pointer to expression string to parse_exp_1.
8855 (create_excep_cond_exprs): Likewise.
8856 * ax-gdb.c (agent_eval_command_one): Likewise.
8857 (maint_agent_printf_command): Likewise.
8858 Constify much of the string handling/parsing.
8859 * breakpoint.c (set_breakpoint_condition): Pass const
8860 pointer to expression string to parse_exp_1.
8861 (update_watchpoint): Likewise.
8862 (parse_cmd_to_aexpr): Constify string handling.
8863 Pass const pointer to parse_exp_1.
8864 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
8865 (find_condition_and_thread): Likewise.
8867 (watch_command_1): Make "arg" const.
8868 Constify string handling.
8869 Copy the expression string instead of changing the input
8871 (update_breakpoint_location): Pass const pointer to
8873 * eval.c (parse_and_eval_address): Make "exp" const.
8874 (parse_to_comma_and_eval): Make "expp" const.
8875 (parse_and_eval): Make "exp" const.
8876 * expression.h (parse_expression): Make argument const.
8877 (parse_exp_1): Make first argument const.
8878 * findcmd.c (parse_find_args): Treat "args" as const.
8879 * linespec.c (parse_linespec): Pass const pointer to
8880 linespec_expression_to_pc.
8881 (linespec_expression_to_pc): Make "exp_ptr" const.
8882 * parse.c (parse_exp_1): Make "stringptr" const.
8883 Make a copy of the expression to pass to parse_exp_in_context until
8884 this whole interface can be constified.
8885 (parse_expression): Make "string" const.
8886 * printcmd.c (ui_printf): Treat "arg" as const.
8887 Handle const strings.
8888 * tracepoint.c (validate_actionline): Pass const pointer to
8889 all calls to parse_exp_1.
8890 (encode_actions_1): Likewise.
8891 * value.h (parse_to_comma_and_eval): Make argument const.
8892 (parse_and_eval_address): Likewise.
8893 (parse_and_eval): Likewise.
8894 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
8895 (varobj_set_value): Likewise.
8896 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
8897 constify string handling.
8898 Pass const pointers to parse_and_eval_address and
8899 parse_to_comman_and_eval.
8900 * cli/cli-utils.c (skip_to_space): Rename to ...
8901 (skip_to_space_const): ... this. Handle const strings.
8902 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
8903 skip_to_space_const.
8904 (skip_to_space_const): Declare.
8905 * common/format.c (parse_format_string): Make "arg" const.
8906 Handle const strings.
8907 * common/format.h (parse_format_string): Make "arg" const.
8908 * gdbserver/ax.c (ax_printf): Make "format" const.
8909 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
8910 of the expression string.
8912 2013-03-12 Hui Zhu <hui@codesourcery.com>
8914 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
8916 2013-03-12 Yao Qi <yao@codesourcery.com>
8917 Hui Zhu <hui@codesourcery.com>
8919 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
8920 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
8923 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
8925 * ada-lex.l (rules): Only recognize 'thread' as a
8926 delimiter when followed by numerals, as for c-exp.y.
8927 Use new rewind_to_char function to rewind the input for
8928 expression-delimiting tokens.
8929 (rewind_to_char): New function.
8931 2013-03-11 Pedro Alves <palves@redhat.com>
8932 Jan Kratochvil <jan.kratochvil@redhat.com>
8934 * configure: Regenerate.
8935 * configure.ac (check dynamic export flag): Link python test with
8938 2013-03-11 Doug Evans <dje@google.com>
8939 Keith Seitz <keiths@redhat.com>
8941 * linespec.c (find_linespec_symbols): Call find_function_symbols
8942 first, and then call lookup_prefix_sym/find_method.
8944 2013-03-11 Pedro Alves <palves@redhat.com>
8946 * charset.c (convert_between_encodings): Don't cast between
8947 different pointer to pointer types. Instead, make the 'inp' local
8948 be of the type iconv expects.
8949 (wchar_iterate): Don't cast between different pointer to pointer
8950 types. Instead, use new pointer local of the type iconv expects.
8951 * target.c (target_read_stralloc, target_fileio_read_stralloc):
8952 Add new local of type char pointer, and use it to get a
8953 char/string view of the byte buffer, instead of casting between
8954 pointer to pointer types.
8956 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
8958 * remote.c (remote_set_trace_buffer_size): Move != operator
8959 to the start of next line to fix an ARI warning.
8961 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8963 * NEWS: Add record changes.
8965 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8967 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
8968 the instruction history disassembly.
8969 * disasm.c (dump_insns): Omit the pc prefix, if requested.
8970 * disasm.h (DISASSEMBLY_OMIT_PC): New.
8972 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8974 * Makefile.in (SFILES): Add record-btrace.c
8975 (COMMON_OBS): Add record-btrace.o
8976 * record-btrace.c: New.
8977 * objfiles.c: Include btrace.h.
8978 (free_objfile): call btrace_free_objfile.
8980 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8982 * target.c (target_call_history, target_call_history_from,
8983 target_call_history_range): New.
8984 * target.h (target_ops) <to_call_history, to_call_history_from,
8985 to_call_history_range>: New fields.
8986 (target_call_history, target_call_history_from,
8987 target_call_history_range): New declaration.
8988 * record.c (get_call_history_modifiers, cmd_record_call_history,
8989 record_call_history_size): New.
8990 (_initialize_record): Add the "record function-call-history" command.
8991 Add "set/show record function-call-history-size" commands.
8992 * record.h (record_print_flag): New.
8994 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8996 * target.h (target_ops) <to_insn_history, to_insn_history_from,
8997 to_insn_history_range>: New fields.
8998 (target_insn_history): New.
8999 (target_insn_history_from): New.
9000 (target_insn_history_range): New.
9001 * target.c (target_insn_history): New.
9002 (target_insn_history_from): New.
9003 (target_insn_history_range): New.
9004 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
9005 (record_insn_history_size): New.
9006 (get_insn_number): New.
9007 (get_context_size): New.
9009 (get_insn_history_modifiers): New.
9010 (cmd_record_insn_history): New.
9011 (_initialize_record): Add "set/show record instruction-history-size"
9012 command. Add "record instruction-history" command.
9014 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9016 * record.h (record_disconnect): New.
9017 (record_detach): New.
9018 (record_mourn_inferior): New.
9020 * record-full.c (record_disconnect, record_detach,
9021 record_mourn_inferior, record_kill): Move to...
9022 * record.c: ...here.
9025 (record_unpush): New.
9026 (cmd_record_stop): Call record_stop. Replace unpush_target
9027 call with record_unpush call.
9028 (record_disconnect, record_detach): Assert that the target
9029 is of record stratum. Call record_unpush, record_stop, and
9031 (record_mourn_inferior, record_kill): Assert that the target
9032 is of record stratum. Call record_unpush and DEBUG.
9034 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9036 * record-full.h, record-full.c (record_memory_query): Rename
9038 (record_full_memory_query): ...this. Update all users.
9039 (record_arch_list_add_reg): Rename to ...
9040 (record_full_arch_list_add_reg): ...this. Update all users.
9041 (record_arch_list_add_mem): Rename to ...
9042 (record_full_arch_list_add_mem): ...this. Update all users.
9043 (record_arch_list_add_end): Rename to ...
9044 (record_full_arch_list_add_end): ...this. Update all users.
9045 (record_gdb_operation_disable_set): Rename to ...
9046 (record_full_gdb_operation_disable_set): ...this.
9049 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9051 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
9052 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
9053 (RECORD_IS_REPLAY): Renamed to ...
9054 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
9055 (RECORD_FILE_MAGIC): Renamed to ...
9056 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
9057 (record_mem_entry): Renamed to ...
9058 (record_full_mem_entry): ... this. Updated all users.
9059 (record_reg_entry): Renamed to ...
9060 (record_full_reg_entry): ... this. Updated all users.
9061 (record_end_entry): Renamed to ...
9062 (record_full_end_entry): ... this. Updated all users.
9063 (record_type) <record_end, record_reg, record_mem>: Renamed
9065 (record_full_type) <record_full_end, record_full_reg,
9066 record_full_mem>: ... this. Updated all users.
9067 (record_entry): Renamed to ...
9068 (record_full_entry): ... this. Updated all users.
9069 (record_core_buf_entry): Renamed to ...
9070 (record_full_core_buf_entry): ... this. Updated all users.
9071 (record_core_regbuf): Renamed to ...
9072 (record_full_core_regbuf): ... this. Updated all users.
9073 (record_core_start): Renamed to ...
9074 (record_full_core_start): ... this. Updated all users.
9075 (record_core_end): Renamed to ...
9076 (record_full_core_end): ... this. Updated all users.
9077 (record_core_buf_list): Renamed to ...
9078 (record_full_core_buf_list): ... this. Updated all users.
9079 (record_first): Renamed to ...
9080 (record_full_first): ... this. Updated all users.
9081 (record_list): Renamed to ...
9082 (record_full_list): ... this. Updated all users.
9083 (record_arch_list_head): Renamed to ...
9084 (record_full_arch_list_head): ... this. Updated all users.
9085 (record_arch_list_tail): Renamed to ...
9086 (record_full_arch_list_tail): ... this. Updated all users.
9087 (record_stop_at_limit): Renamed to ...
9088 (record_full_stop_at_limit): ... this. Updated all users.
9089 (record_insn_max_num): Renamed to ...
9090 (record_full_insn_max_num): ... this. Updated all users.
9091 (record_insn_num): Renamed to ...
9092 (record_full_insn_num): ... this. Updated all users.
9093 (record_insn_count): Renamed to ...
9094 (record_full_insn_count): ... this. Updated all users.
9095 (record_ops): Renamed to ...
9096 (record_full_ops): ... this. Updated all users.
9097 (record_core_ops): Renamed to ...
9098 (record_full_core_ops): ... this. Updated all users.
9099 (set_record_cmdlist): Renamed to ...
9100 (set_record_full_cmdlist): ... this. Updated all users.
9101 (show_record_cmdlist): Renamed to ...
9102 (show_record_full_cmdlist): ... this. Updated all users.
9103 (record_cmdlist): Renamed to ...
9104 (record_full_cmdlist): ... this. Updated all users.
9105 (record_beneath_to_resume_ops): Renamed to ...
9106 (record_full_beneath_to_resume_ops): ... this. Updated all users.
9107 (record_beneath_to_resume): Renamed to ...
9108 (record_full_beneath_to_resume): ... this. Updated all users.
9109 (record_beneath_to_wait_ops): Renamed to ...
9110 (record_full_beneath_to_wait_ops): ... this. Updated all users.
9111 (record_beneath_to_wait): Renamed to ...
9112 (record_full_beneath_to_wait): ... this. Updated all users.
9113 (record_beneath_to_store_registers_ops): Renamed to ...
9114 (record_full_beneath_to_store_registers_ops): ... this.
9116 (record_beneath_to_store_registers): Renamed to ...
9117 (record_full_beneath_to_store_registers): ... this.
9119 (record_beneath_to_xfer_partial_ops): Renamed to ...
9120 (record_full_beneath_to_xfer_partial_ops): ... this.
9122 (record_beneath_to_xfer_partial): Renamed to ...
9123 (record_full_beneath_to_xfer_partial): ... this.
9125 (record_beneath_to_insert_breakpoint): Renamed to ...
9126 (record_full_beneath_to_insert_breakpoint): ... this.
9128 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
9129 (record_full_beneath_to_stopped_by_watchpoint): ... this.
9131 (record_beneath_to_stopped_data_address): Renamed to ...
9132 (record_full_beneath_to_stopped_data_address): ... this.
9134 (record_beneath_to_async): Renamed to ...
9135 (record_full_beneath_to_async): ... this. Updated all users.
9136 (record_goto_insn): Renamed to ...
9137 (record_full_goto_insn): ... this. Updated all users.
9138 (record_save): Renamed to ...
9139 (record_full_save): ... this. Updated all users.
9140 (record_reg_alloc): Renamed to ...
9141 (record_full_reg_alloc): ... this. Updated all users.
9142 (record_reg_release): Renamed to ...
9143 (record_full_reg_release): ... this. Updated all users.
9144 (record_mem_alloc): Renamed to ...
9145 (record_full_mem_alloc): ... this. Updated all users.
9146 (record_mem_release): Renamed to ...
9147 (record_full_mem_release): ... this. Updated all users.
9148 (record_end_alloc): Renamed to ...
9149 (record_full_end_alloc): ... this. Updated all users.
9150 (record_end_release): Renamed to ...
9151 (record_full_end_release): ... this. Updated all users.
9152 (record_entry_release): Renamed to ...
9153 (record_full_entry_release): ... this. Updated all users.
9154 (record_list_release): Renamed to ...
9155 (record_full_list_release): ... this. Updated all users.
9156 (record_list_release_following): Renamed to ...
9157 (record_full_list_release_following): ... this.
9159 (record_list_release_first): Renamed to ...
9160 (record_full_list_release_first): ... this. Updated all users.
9161 (record_arch_list_add): Renamed to ...
9162 (record_full_arch_list_add): ... this. Updated all users.
9163 (record_get_loc): Renamed to ...
9164 (record_full_get_loc): ... this. Updated all users.
9165 (record_check_insn_num): Renamed to ...
9166 (record_full_check_insn_num): ... this. Updated all users.
9167 (record_arch_list_cleanups): Renamed to ...
9168 (record_full_arch_list_cleanups): ... this. Updated all users.
9169 (record_message): Renamed to ...
9170 (record_full_message): ... this. Updated all users.
9171 (record_message_wrapper): Renamed to ...
9172 (record_full_message_wrapper): ... this. Updated all users.
9173 (record_message_wrapper_safe): Renamed to ...
9174 (record_full_message_wrapper_safe): ... this. Updated all users.
9175 (record_gdb_operation_disable): Renamed to ...
9176 (record_full_gdb_operation_disable): ... this. Updated all users.
9177 (record_hw_watchpoint): Renamed to ...
9178 (record_full_hw_watchpoint): ... this. Updated all users.
9179 (record_exec_insn): Renamed to ...
9180 (record_full_exec_insn): ... this. Updated all users.
9181 (record_restore): Renamed to ...
9182 (record_full_restore): ... this. Updated all users.
9183 (record_async_inferior_event_token): Renamed to ...
9184 (record_full_async_inferior_event_token): ... this.
9186 (record_async_inferior_event_handler): Renamed to ...
9187 (record_full_async_inferior_event_handler): ... this.
9189 (record_core_open_1): Renamed to ...
9190 (record_full_core_open_1): ... this. Updated all users.
9191 (record_open_1): Renamed to ...
9192 (record_full_open_1): ... this. Updated all users.
9193 (record_open): Renamed to ...
9194 (record_full_open): ... this. Updated all users.
9195 (record_close): Renamed to ...
9196 (record_full_close): ... this. Updated all users.
9197 (record_resume_step): Renamed to ...
9198 (record_full_resume_step): ... this. Updated all users.
9199 (record_resumed): Renamed to ...
9200 (record_full_resumed): ... this. Updated all users.
9201 (record_execution_dir): Renamed to ...
9202 (record_full_execution_dir): ... this. Updated all users.
9203 (record_resume): Renamed to ...
9204 (record_full_resume): ... this. Updated all users.
9205 (record_get_sig): Renamed to ...
9206 (record_full_get_sig): ... this. Updated all users.
9207 (record_sig_handler): Renamed to ...
9208 (record_full_sig_handler): ... this. Updated all users.
9209 (record_wait_cleanups): Renamed to ...
9210 (record_full_wait_cleanups): ... this. Updated all users.
9211 (record_wait_1): Renamed to ...
9212 (record_full_wait_1): ... this. Updated all users.
9213 (record_wait): Renamed to ...
9214 (record_full_wait): ... this. Updated all users.
9215 (record_stopped_by_watchpoint): Renamed to ...
9216 (record_full_stopped_by_watchpoint): ... this. Updated all users.
9217 (record_disconnect): Renamed to ...
9218 (record_full_disconnect): ... this. Updated all users.
9219 (record_detach): Renamed to ...
9220 (record_full_detach): ... this. Updated all users.
9221 (record_mourn_inferior): Renamed to ...
9222 (record_full_mourn_inferior): ... this. Updated all users.
9223 (record_kill): Renamed to ...
9224 (record_full_kill): ... this. Updated all users.
9225 (record_stopped_data_address): Renamed to ...
9226 (record_full_stopped_data_address): ... this. Updated all users.
9227 (record_registers_change): Renamed to ...
9228 (record_full_registers_change): ... this. Updated all users.
9229 (record_store_registers): Renamed to ...
9230 (record_full_store_registers): ... this. Updated all users.
9231 (record_xfer_partial): Renamed to ...
9232 (record_full_xfer_partial): ... this. Updated all users.
9233 (record_breakpoint): Renamed to ...
9234 (record_full_breakpoint): ... this. Updated all users.
9235 (record_breakpoint_p): Renamed to ...
9236 (record_full_breakpoint_p): ... this. Updated all users.
9237 (record_breakpoints): Renamed to ...
9238 (record_full_breakpoints): ... this. Updated all users.
9239 (record_sync_record_breakpoints): Renamed to ...
9240 (record_full_sync_record_breakpoints): ... this.
9242 (record_init_record_breakpoints): Renamed to ...
9243 (record_full_init_record_breakpoints): ... this.
9245 (record_insert_breakpoint): Renamed to ...
9246 (record_full_insert_breakpoint): ... this. Updated all users.
9247 (record_remove_breakpoint): Renamed to ...
9248 (record_full_remove_breakpoint): ... this. Updated all users.
9249 (record_can_execute_reverse): Renamed to ...
9250 (record_full_can_execute_reverse): ... this. Updated all users.
9251 (record_get_bookmark): Renamed to ...
9252 (record_full_get_bookmark): ... this. Updated all users.
9253 (record_goto_bookmark): Renamed to ...
9254 (record_full_goto_bookmark): ... this. Updated all users.
9255 (record_async): Renamed to ...
9256 (record_full_async): ... this. Updated all users.
9257 (record_can_async_p): Renamed to ...
9258 (record_full_can_async_p): ... this. Updated all users.
9259 (record_is_async_p): Renamed to ...
9260 (record_full_is_async_p): ... this. Updated all users.
9261 (record_execution_direction): Renamed to ...
9262 (record_full_execution_direction): ... this. Updated all users.
9263 (record_info): Renamed to ...
9264 (record_full_info): ... this. Updated all users.
9265 (record_delete): Renamed to ...
9266 (record_full_delete): ... this. Updated all users.
9267 (record_is_replaying): Renamed to ...
9268 (record_full_is_replaying): ... this. Updated all users.
9269 (record_goto_entry): Renamed to ...
9270 (record_full_goto_entry): ... this. Updated all users.
9271 (record_goto_begin): Renamed to ...
9272 (record_full_goto_begin): ... this. Updated all users.
9273 (record_goto_end): Renamed to ...
9274 (record_full_goto_end): ... this. Updated all users.
9275 (record_goto): Renamed to ...
9276 (record_full_goto): ... this. Updated all users.
9277 (init_record_ops): Renamed to ...
9278 (init_record_full_ops): ... this. Updated all users.
9279 (record_core_resume): Renamed to ...
9280 (record_full_core_resume): ... this. Updated all users.
9281 (record_core_kill): Renamed to ...
9282 (record_full_core_kill): ... this. Updated all users.
9283 (record_core_fetch_registers): Renamed to ...
9284 (record_full_core_fetch_registers): ... this. Updated all users.
9285 (record_core_prepare_to_store): Renamed to ...
9286 (record_full_core_prepare_to_store): ... this. Updated all users.
9287 (record_core_store_registers): Renamed to ...
9288 (record_full_core_store_registers): ... this. Updated all users.
9289 (record_core_xfer_partial): Renamed to ...
9290 (record_full_core_xfer_partial): ... this. Updated all users.
9291 (record_core_insert_breakpoint): Renamed to ...
9292 (record_full_core_insert_breakpoint): ... this. Updated all users.
9293 (record_core_remove_breakpoint): Renamed to ...
9294 (record_full_core_remove_breakpoint): ... this. Updated all users.
9295 (record_core_has_execution): Renamed to ...
9296 (record_full_core_has_execution): ... this. Updated all users.
9297 (init_record_core_ops): Renamed to ...
9298 (init_record_full_core_ops): ... this. Updated all users.
9299 (cmd_record_restore): Renamed to ...
9300 (cmd_record_full_restore): ... this. Updated all users.
9301 (record_save_cleanups): Renamed to ...
9302 (record_full_save_cleanups): ... this. Updated all users.
9303 (cmd_record_start): Renamed to ...
9304 (cmd_record_full_start): ... this. Updated all users.
9305 (set_record_insn_max_num): Renamed to ...
9306 (set_record_full_insn_max_num): ... this. Updated all users.
9307 (set_record_command): Renamed to ...
9308 (set_record_full_command): ... this. Updated all users.
9309 (show_record_command): Renamed to ...
9310 (show_record_full_command): ... this. Updated all users.
9311 (_initialize_record): Renamed to ...
9312 (_initialize_record_full): ... this. Updated all users.
9314 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9316 * record.h: Split into this and ...
9317 * record-full.h: ... this.
9318 * record.c: Split into this and ...
9319 * record-full.c: ... this.
9320 * target.h (target_ops): Add new fields to_info_record,
9321 to_save_record, to_delete_record, to_record_is_replaying,
9322 to_goto_record_begin, to_goto_record_end, to_goto_record.
9323 (target_info_record): New.
9324 (target_save_record): New.
9325 (target_supports_delete_record): New.
9326 (target_delete_record): New.
9327 (target_record_is_replaying): New.
9328 (target_goto_record_begin): New.
9329 (target_goto_record_end): New.
9330 (target_goto_record): New.
9331 * target.c (target_info_record): New.
9332 (target_save_record): New.
9333 (target_supports_delete_record): New.
9334 (target_delete_record): New.
9335 (target_record_is_replaying): New.
9336 (target_goto_record_begin): New.
9337 (target_goto_record_end): New.
9338 (target_goto_record): New.
9339 * record.h: Declare struct cmd_list_element.
9340 (record_cmdlist): New declaration.
9341 (set_record_cmdlist): New declaration.
9342 (show_record_cmdlist): New declaration.
9343 (info_record_cmdlist): New declaration.
9344 (cmd_record_goto): New declaration.
9345 * record.c: Remove unnecessary includes.
9347 (cmd_record_goto): Remove declaration.
9348 (record_cmdlist): Now extern. Initialize.
9349 (set_record_cmdlist): Now extern. Initialize.
9350 (show_record_cmdlist): Now extern. Initialize.
9351 (info_record_cmdlist): Now extern. Initialize.
9352 (find_record_target): New.
9353 (require_record_target): New.
9354 (cmd_record_start): Update.
9355 (cmd_record_delete): Remove target-specific code.
9356 Call target_delete_record.
9357 (cmd_record_stop): Unpush any record target.
9358 (set_record_insn_max_num): Move to record-full.c
9359 (set_record_command): Add comment.
9360 (show_record_command): Add comment.
9361 (info_record_command): Update comment.
9362 Remove target-specific code.
9363 Call the record target's to_info_record.
9364 (cmd_record_start): New.
9365 (cmd_record_goto): Now extern.
9366 Remove target-specific code.
9367 Call target_goto_begin, target_goto_end, or target_goto.
9368 (_initialize_record): Move record target ops initialization to
9370 Change "record" command help text.
9371 Move "record restore", "record set", and "record show" commands to
9373 * Makefile.in (SFILES): Add record-full.c.
9374 (HFILES_NO_SRCDIR): Add record-full.h.
9375 (COMMON_OBS): Add record-full.o.
9376 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
9377 * arm-tdep.c: Include record-full.h.
9378 * i386-linux-tdep.c: Include record-full.h instead of record.h.
9379 * i386-tdep.c: Include record-full.h.
9380 * infrun.c: Include record-full.h.
9381 * linux-record.c: Include record-full.h.
9382 * moxie-tdep.c: Include record-full.h.
9383 * record-full.c: Include record-full.h.
9384 Change module comment.
9385 (set_record_full_cmdlist): New.
9386 (show_record_full_cmdlist): New.
9387 (record_full_cmdlist): New.
9388 (record_goto_insn): New declaration.
9389 (record_save): New declaration.
9390 (record_check_insn_num): Change query string.
9392 (record_delete): New.
9393 (record_is_replaying): New.
9394 (record_goto_entry): New.
9395 (record_goto_begin): New.
9396 (record_goto_end): New.
9398 (init_record_ops): Update.
9399 (init_record_core_ops): Update.
9400 (cmd_record_save): Rename to record_save. Remove target and arg checks.
9401 (cmd_record_start): New.
9402 (set_record_insn_max_num): Moved from record.c
9403 (set_record_full_command): New.
9404 (show_record_full_command): New.
9405 (_initialize_record_full): New.
9407 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9409 * target.h (add_deprecated_target_alias): New.
9410 * target.c (add_deprecated_target_alias): New.
9412 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9414 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
9416 (linux_supports_btrace): Add kernel and
9418 (kernel_supports_btrace): New function.
9419 (cpu_supports_btrace): New function.
9420 (intel_supports_btrace): New function.
9422 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9424 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
9425 * remote.c: Include btrace.h.
9426 (struct btrace_target_info): New struct.
9427 (remote_supports_btrace): New function.
9428 (send_Qbtrace): New function.
9429 (remote_enable_btrace): New function.
9430 (remote_disable_btrace): New function.
9431 (remote_teardown_btrace): New function.
9432 (remote_read_btrace): New function.
9433 (init_remote_ops): Add btrace ops.
9434 (enum <unnamed>): Add btrace packets.
9435 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
9436 (_initialize_remote): Add packet configuration for branch tracing.
9438 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9440 * features/btrace.dtd: New file.
9441 * Makefile.in (XMLFILES): Add btrace.dtd.
9442 * btrace.h (parse_xml_btrace): New declaration.
9443 * btrace.c: Include xml-support.h.
9444 (parse_xml_btrace): New function.
9445 (parse_xml_btrace_block): New function.
9446 (block_attributes): New struct.
9447 (btrace_attributes): New struct.
9448 (btrace_children): New struct.
9449 (btrace_elements): New struct.
9451 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9453 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
9454 (amd64_linux_enable_btrace): New.
9455 (amd64_linux_disable_btrace): New.
9456 (amd64_linux_teardown_btrace): New.
9457 (_initialize_amd64_linux_nat): Initialize btrace ops.
9458 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
9459 (i386_linux_enable_btrace): New.
9460 (i386_linux_disable_btrace): New.
9461 (i386_linux_teardown_btrace): New.
9462 (_initialize_i386_linux_nat): Initialize btrace ops.
9463 * config/i386/linux.mh: Add linux-btrace.o.
9464 * config/i386/linux64.mh: Add linux-btrace.o.
9466 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9468 * common/linux_btrace.h: New file.
9469 * common/linux_btrace.c: New file.
9470 * Makefile.in (SFILES): Add btrace.c.
9471 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
9472 (COMMON_OBS): Add btrace.o.
9473 (linux-btrace.o): New rule.
9475 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9477 * target.h: Include btrace.h.
9478 (struct target_ops) <to_supports_btrace, to_enable_btrace,
9479 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
9480 * target.c (target_supports_btrace): New function.
9481 (target_enable_btrace): New function.
9482 (target_disable_btrace): New function.
9483 (target_teardown_btrace): New function.
9484 (target_read_btrace): New function.
9485 * btrace.h: New file.
9486 * btrace.c: New file.
9487 * Makefile.in: Add btrace.c.
9488 * gdbthread.h: Include btrace.h.
9489 (struct thread_info): Add btrace field.
9490 * thread.c: Include btrace.h.
9491 (clear_thread_inferior_resources): Call target_teardown_btrace.
9492 * common/btrace-common.h: New file.
9494 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
9496 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
9497 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
9498 kill_status to outer block.
9500 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
9502 Fix entry-values if the callee called a noreturn function.
9503 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
9504 get_frame_address_in_block. Add new comment.
9506 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
9508 Fix entry-values in C++ across CUs.
9509 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
9510 lookup_minimal_symbol. Add a comment.
9512 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
9515 2013-03-08 Yao Qi <yao@codesourcery.com>
9517 * tracepoint.c (_initialize_tracepoint): Indent the code.
9519 2013-03-08 Pedro Alves <palves@redhat.com>
9521 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
9522 (parse_find_args, find_command): Change type of pattern buffer
9523 locals to 'gdb_byte *'.
9525 2013-03-08 Stan Shebs <stan@codesourcery.com>
9526 Hafiz Abid Qadeer <abidh@codesourcery.com>
9528 * NEWS: Mention set and show trace-buffer-size commands.
9530 * target.h (struct target_ops): New method
9531 to_set_trace_buffer_size.
9532 (target_set_trace_buffer_size): New macro.
9533 * target.c (update_current_target): Set up new method.
9534 * tracepoint.c (trace_buffer_size): New global.
9535 (start_tracing): Send it to the target.
9536 (set_trace_buffer_size): New function.
9537 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
9538 * remote.c (remote_set_trace_buffer_size): New function.
9539 (_initialize_remote): Use it.
9540 (QTBuffer:size) New remote command.
9541 (PACKET_QTBuffer_size): New enum.
9542 (remote_protocol_features): Add an entry for
9543 PACKET_QTBuffer_size.
9545 2013-03-08 Tom Tromey <tromey@redhat.com>
9547 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
9550 2013-03-07 Pedro Alves <palves@redhat.com>
9552 * target.c (target_read_stralloc, target_fileio_read_alloc):
9553 *Cast pointer to 'gdb_byte *' in target call.
9555 2013-03-07 Pedro Alves <palves@redhat.com>
9557 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
9560 2013-03-07 Keith Seitz <keiths@redhat.com>
9562 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
9563 (trace_pass_command): Likewise.
9564 * cli/cli-cmds.c: Include cli/cli-utils.h.
9565 (source_command): Use skip-spaces.
9566 (disassemble_command): Likewise.
9567 * findcmd.c: Include cli/cli-utils.h.
9568 (parse_find_args): Use skip_spaces.
9569 * go32-nat.c: Include cli/cli-utils.h.
9570 (go32_sldt): Use skip_spaces.
9571 (go32_sgdt): Likewise.
9572 (go32_sidt): Likewise.
9573 (go32_pde): Likewise.
9574 (go32_pte): Likewise.
9575 (go32_pte_for_address): Likewise.
9576 * infcmd.c: Include cli/cli-utils.h.
9577 (registers_info): Use skip_spaces.
9578 * linux-tdep.c (read_mapping): Use skip_spaces_const.
9579 (linux_info_proc): Likewise.
9580 * linux-thread-db.c: Include cli/cli-utils.h.
9581 (info_auto_load_libthread_db): Use skip_spaces_const.
9582 * m32r-rom.c: Include cli/cli-utils.h.
9583 (m32r_upload_command): Use skip_spaces.
9584 * maint.c: Include cli/cli-utils.h.
9585 (maintenance_translate_address): Use skip_spaces.
9586 * mi/mi-parse.c: Include cli/cli-utils.h.
9587 (mi_parse_argv): Use skip_spaces.
9588 (mi_parse): Likewise.
9589 * minsyms.c: Include cli/cli-utils.h.
9590 (msymbol_hash_iw): Use skip_spaces_const.
9591 * objc-lang.c: Include cli/cli-utils.h.
9592 (parse_selector): Use skip_spaces.
9593 (parse_method): Likewise.
9594 * python/python.c: Include cli/cli-utils.h.
9595 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
9596 (python_command)[HAVE_PYTHON]: Likewise.
9597 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
9598 * remote-m32r-sdi.c: Include cli/cli-utils.h.
9599 (m32r_load): Use skip_spaces.
9600 * serial.c: Include cli/cli-utils.h.
9601 (serial_open): Use skip_spaces_const.
9602 * stack.c: Include cli/cli-utils.h.
9603 (parse_frame_specification_1): Use skip_spaces_const.
9604 * symfile.c: Include cli/cli-utils.h.
9605 (set_ext_lang_command): Use skip_spaces.
9606 * symtab.c: Include cli/cli-utils.h.
9607 (rbreak_command): Use skip_spaces.
9608 * thread.c (thread_name_command): Use skip_spaces.
9609 * tracepoint.c (validate_actionline): Use skip_spaces.
9610 (encode_actions_1): Likewise.
9611 (trace_find_range_command): Likewise.
9612 (trace_find_outside_command): Likewise.
9613 (trace_dump_actions): Likewise.
9615 2013-03-07 Pedro Alves <palves@redhat.com>
9617 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
9618 * expprint.c (print_subexp_standard): Likewise.
9619 * utils.c (host_char_to_target): Likewise.
9620 * valprint.c (generic_emit_char, generic_printstr): Likewise.
9621 * varobj.c (value_get_print_value): Change type of local to char*.
9622 Cast it gdb_byte * in call to language printer.
9624 2013-03-07 Pedro Alves <palves@redhat.com>
9626 * charset.c (struct wchar_iterator) <input>: Change type to 'const
9628 (make_wchar_iterator): Remove cast to char*.
9629 (wchar_iterate): Change type of local.
9631 2013-03-07 Pedro Alves <palves@redhat.com>
9633 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
9634 for 'regcache->register_status'.
9636 2013-03-07 Pedro Alves <palves@redhat.com>
9638 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
9641 2013-03-07 Pedro Alves <palves@redhat.com>
9643 * stap-probe.c (handle_stap_probe): Add cast to char*.
9645 2013-03-07 Pedro Alves <palves@redhat.com>
9647 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
9648 RECORD_MSGRCV>: Pass a signed variable to
9649 regcache_raw_read_signed, instead of an unsigned one.
9651 2013-03-07 Pedro Alves <palves@redhat.com>
9653 * remote-notif.c (notif_debug): Change type to int.
9654 * remote-notif.h (notif_debug): Likewise.
9656 2013-03-07 Pedro Alves <palves@redhat.com>
9658 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
9660 2013-03-07 Pedro Alves <palves@redhat.com>
9662 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
9663 * remote.h (hex2bin, bin2hex): ... here.
9664 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
9666 2013-03-07 Eli Zaretskii <eliz@gnu.org>
9668 * utils.c (initialize_utils): Improve doc strings of "set/show
9669 width", "set/show height", and "set/show pagination".
9671 2013-03-06 Keith Seitz <keiths@redhat.com>
9673 * ax-gdb.c (gen_printf): Make FORMAT const.
9674 * ax-gdb.h (gen_printf): Likewise.
9675 * ax-general.c (ax_string): Make STR const.
9676 * ax.h (ax_string): Likewise.
9678 2013-03-06 Doug Evans <dje@google.com>
9680 * elfread.c (elf_symfile_read): Move debugging printf to more
9683 2013-03-06 Pedro Alves <palves@redhat.com>
9685 * python/py-utils.c (target_string_to_unicode): Delete function.
9686 * python/python-internal.h (target_string_to_unicode): Delete
9689 2013-03-06 Pierre Muller <muller@sourceware.org>
9691 * linespec.c (get_current_search_block): ARI fix, use (void)
9692 for empty parameter list.
9694 2013-03-05 Doug Evans <dje@google.com>
9696 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
9697 of old ada_lookup_symbol_list. In !full_search case, don't
9699 (ada_lookup_symbol_list): Delete arg full_search, all callers
9700 updated. Call ada_lookup_symbol_list_worker.
9701 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
9702 * ada-lang.h (ada_lookup_symbol_list): Update.
9703 * language.h (language_defn): Update comment for
9704 la_iterate_over_symbols.
9705 * linespec.c (iterate_over_file_blocks): New function.
9706 (iterate_over_all_matching_symtabs): Call it.
9707 (lookup_prefix_sym): Ditto.
9708 (get_current_search_block): New function.
9709 (get_search_block): Delete.
9710 (find_label_symbols): Call get_current_search_block.
9711 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
9712 * symtab.c (iterate_over_symbols): Don't search superblocks.
9714 2013-03-05 Yao Qi <yao@codesourcery.com>
9716 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
9717 parameter VAR's type from "unsigned int" to "int".
9718 * command.h (var_zuinteger_unlimited): Update its comments.
9719 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
9721 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
9723 * NEWS: Mention new target x86_64-*-cygwin*.
9725 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
9727 * configure.host: Add x86_64-*-cygwin* as host.
9728 * configure.tgt: Add x86_64-*-cygwin* as target.
9729 * config/i386/cygwin64.mh: New file.
9731 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
9733 * linespec.c (decode_line_2): Fix duplicate request off by two message.
9735 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
9737 * linespec.c (struct linespec_canonical_name): New.
9738 (struct linespec_state): Change canonical_names type to it.
9739 (add_sal_to_sals): Change variable canonical_name to canonical. Change
9740 xrealloc element size. Initialize the different CANONICAL fields.
9741 (canonical_to_fullform): New.
9742 (filter_results): Use it. Add variables canonical, fullform and
9744 (struct decode_line_2_item, decode_line_2_compare_items): New.
9745 (decode_line_2): Remove variables iter and item_names, add variables
9746 items and items_count. Modify the code for these new variables.
9748 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
9750 * coff-pe-read.c (read_pe_exported_syms): Don't return without
9753 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
9755 * tracepoint.c (build_traceframe_info): Add code for byte order.
9757 2013-03-02 Kevin Buettner <kevinb@redhat.com>
9759 * v850-tdep.c: (v850e2_register_name): Revise system register
9760 names to match current V850E2M architecture specifications.
9761 Update register number enum comments too.
9763 2013-03-01 Jiong Wang <jiwang@tilera.com>
9764 Pedro Alves <palves@redhat.com>
9766 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
9768 (tilegx_skip_prologue): Limit prologue analysis to section end.
9770 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
9772 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
9775 2013-03-01 Pedro Alves <palves@redhat.com>
9777 Use gdb_byte for bytes from the program being debugged.
9779 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
9780 Change type of local 'buf' to gdb_byte.
9781 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
9782 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
9783 * cris-tdep.c (cris_sigcontext_addr)
9784 (cris_sigtramp_frame_unwind_cache): Likewise.
9785 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
9786 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
9788 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
9789 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
9790 (hppa32_hpux_search_dummy_call_sequence)
9791 (hppa_hpux_supply_save_state): Likewise.
9792 * hppa-linux-tdep.c (insns_match_pattern)
9793 (hppa_linux_find_global_pointer): Likewise.
9794 * hppa-tdep.c (hppa_in_function_epilogue_p)
9795 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
9796 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
9797 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
9798 (i386fbsd_collect_uthread): Likewise.
9799 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
9800 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
9801 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
9802 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
9803 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
9804 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
9805 (ia64_libunwind_frame_prev_register)
9806 (ia64_libunwind_sigtramp_frame_this_id)
9807 (ia64_find_global_pointer_from_dynamic_section)
9808 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
9809 (ia64_unwind_pc): Likewise.
9810 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
9811 * m68hc11-tdep.c (m68hc11_push_dummy_call)
9812 (m68hc11_extract_return_value): Likewise.
9813 * m68klinux-nat.c (fetch_register, store_register): Likewise.
9814 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
9815 (mep_get_insn, mep_push_dummy_call): Likewise.
9816 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
9817 (mips_linux_in_dynsym_stub): Likewise.
9818 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
9819 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
9820 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
9822 * remote-mips.c (mips_set_register): Likewise.
9823 * remote-sim.c (gdbsim_fetch_register): Likewise.
9824 * score-tdep.c (score7_fetch_inst): Change type of parameter
9825 'memblock' and local 'buf' to gdb_byte.
9826 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
9827 Change type of local 'buf' to gdb_byte. Adjust.
9828 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
9830 (score7_analyze_prologue): Change type of 'memblock' and
9831 'memblock_ptr' locals to gdb_byte*.
9832 * sh64-tdep.c (sh64_extract_return_value)
9833 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
9834 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
9835 * solib-pa64.c (pa64_solib_create_inferior_hook)
9836 (pa64_open_symbol_file_object): Remove local 'buf'.
9837 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
9838 (som_open_symbol_file_object): Likewise.
9839 * solib-spu.c (spu_current_sos): Likewise.
9840 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
9841 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
9842 (spu_store_registers): Likewise.
9843 * target.c (debug_print_register): Likewise.
9844 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
9845 * xstormy16-tdep.c (xstormy16_store_return_value)
9846 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
9847 (xstormy16_find_jmp_table_entry): Likewise.
9849 2013-03-01 Jiong Wang <jiwang@tilera.com>
9851 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
9852 (tilegx_gdbarch_init): Install it.
9854 2013-02-28 Tom Tromey <tromey@redhat.com>
9856 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
9859 2013-02-28 Doug Evans <dje@google.com>
9861 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
9862 * python/python.c (gdbpy_find_pc_line): Ditto.
9864 2013-02-28 Tom Tromey <tromey@redhat.com>
9866 * contrib/excheck.py: New file.
9867 * contrib/exsummary.py: New file.
9868 * contrib/gcc-with-excheck: New file.
9870 2013-02-28 Tom Tromey <tromey@redhat.com>
9872 * python/python.c (gdbpy_print_stack): Call begin_line and
9873 fprintf_filtered inside TRY_CATCH.
9875 2013-02-28 Tom Tromey <tromey@redhat.com>
9877 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
9880 2013-02-28 Tom Tromey <tromey@redhat.com>
9882 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
9883 frame_object_to_frame_info inside TRY_CATCH.
9885 2013-02-28 Tom Tromey <tromey@redhat.com>
9887 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
9890 2013-02-28 Tom Tromey <tromey@redhat.com>
9892 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
9894 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
9896 * windows-nat.c: Throughout, fix format strings and casts of
9897 printf-like functions to avoid type related warnings on all
9899 (handle_output_debug_string): Fetch context information address
9900 from debug string using string_to_core_addr.
9902 2013-02-27 Jiong Wang <jiwang@tilera.com>
9904 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
9905 * regformats/reg-tilegx32.dat: New.
9907 2013-02-27 Jiong Wang <jiwang@tilera.com>
9909 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
9911 2013-02-27 Jiong Wang <jiwang@tilera.com>
9913 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
9915 2013-02-27 Yao Qi <yao@codesourcery.com>
9916 Pedro Alves <palves@redhat.com>
9918 * tracepoint.c (tfile_trace_find): For tfind
9919 pc/tp/range/outside, look for the next trace frame instead of
9920 always starting from frame 0.
9922 2013-02-26 Anthony Green <green@moxielogic.com>
9924 * configure.tgt: Add support for moxie-*-rtems* target.
9926 2013-02-25 Pedro Alves <palves@redhat.com>
9928 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
9931 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
9933 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
9934 if $fp is used as the virtual frame pointer.
9936 2013-02-23 Alan Modra <amodra@gmail.com>
9938 * elfread.c (elf_symtab_read): Do not use udata.p here to find
9940 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
9941 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
9942 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
9943 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
9945 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9948 * elfread.c (build_id_bfd_get): Make the return type const.
9949 (build_id_verify): Make the check parameter const.
9950 (build_id_to_debug_filename): Make the build_id parameter and variable
9952 (find_separate_debug_file_by_buildid): Make the variable build_id const.
9954 2013-02-21 Alan Modra <amodra@gmail.com>
9956 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
9958 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
9960 Add a new method 'disassemble' to gdb.Architecture class.
9961 * python/py-arch.c (archpy_disassmble): Implementation of the
9962 new method gdb.Architecture.disassemble.
9963 (arch_object_methods): Add entry for the new method.
9965 2013-02-20 Jiong Wang <jiwang@tilera.com>
9967 * MAINTAINERS (Write After Approval): Add myself to the list.
9969 2013-02-19 Pedro Alves <palves@redhat.com>
9971 Garbage collect 'struct monitor_ops'::load_routine.
9973 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
9974 * monitor.c (monitor_load): No longer call
9975 current_monitor->load_routine.
9976 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
9977 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
9978 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
9980 2013-02-19 Pedro Alves <palves@redhat.com>
9984 Harmonize with generic_load.
9986 * monitor.c: Include "readline/readline.h".
9987 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
9988 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
9989 long/strtol for the 'load_offset' local. Error out if no argument
9990 is given or if too many arguments are given. Tilde expand the
9991 passed in file name.
9993 2013-02-19 Kai Tietz <ktietz@redhat.com>
9996 * symfile.c (load_section_data): Change type of load_offset
9998 (generic_load): User strtoulst instead of strtoul for conversion
10001 2013-02-19 Jiong Wang <jiwang@tilera.com>
10003 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
10004 for return address, "lr" register, saved on stack.
10005 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
10006 after we invoke tilegx_analyze_prologue.
10008 2013-02-19 Jiong Wang <jiwang@tilera.com>
10010 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
10012 2013-02-19 Jiong Wang <jiwang@tilera.com>
10014 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
10016 2013-02-19 Jiong Wang <jiwang@tilera.com>
10018 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
10019 (tilegx_write_pc): New function.
10020 (tilegx_cannot_reference_register): Return zero if REGNO
10021 is TILEGX_FAULTNUM_REGNUM.
10022 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
10023 (tilegx_register_name): Add handling of "faultnum" register.
10024 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
10025 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
10026 handling of TILEGX_FAULTNUM_REGNUM.
10027 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
10029 2013-02-19 Jiong Wang <jiwang@tilera.com>
10031 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
10032 should be aligned to 64bit.
10034 2013-02-19 Kai Tietz <ktietz@redhat.com>
10036 * windows-nat.c (windows_xfer_memory): Fix debug-output
10039 2013-02-19 Lei Liu <lei.liu2@windriver.com>
10041 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
10042 Don't check DSP register number if HAVE_DSP is not set.
10044 2013-02-19 Alan Modra <amodra@gmail.com>
10046 * elfread.c (struct build_id): Delete. Use struct elf_build_id
10047 throughout file instead.
10048 (build_id_bfd_get): Update to use new elf_tdata build_id field.
10049 Don't xmalloc return value.
10050 (build_id_verify): Similarly. Don't xfree.
10051 (build_id_to_debug_filename): Update.
10052 (find_separate_debug_file_by_buildid): Update, don't xfree.
10054 2013-02-18 Tom Tromey <tromey@redhat.com>
10057 * dwarf2read.c (read_subrange_type): Use result of
10060 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
10062 * frame.c: Remove one extra white space after #include
10065 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
10067 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
10069 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
10071 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
10072 and dir commands into an if block.
10074 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
10076 * python/py-breakpoint (struct pybp_code): Use int instead of
10079 2013-02-15 Pedro Alves <pedro@codesourcery.com>
10080 Hafiz Abid Qadeer <abidh@codesourcery.com>
10082 * NEWS: Mention new field "trace-file".
10083 * tracepoint.c (trace_status_mi): Output "trace-file" field.
10084 (tfile_open): Record the trace file's filename in the trace
10086 (tfile_files_info): Mention the name of the trace file.
10087 Check the "filename" field explicitely.
10088 (trace_status_command): Explicitely check "filename" field.
10089 (trace_find_command): Ditto.
10090 (trace_find_pc_command): Ditto.
10091 (trace_find_tracepoint_command): Ditto.
10092 (trace_find_line_command): Ditto.
10093 (trace_find_range_command): Ditto.
10094 (trace_find_outside_command): Ditto.
10095 * tracepoint.h (struct trace_status) <from_file>: Rename it
10096 to "filename" and make it hold the trace file's filename
10097 instead of a boolean.
10098 * remote.c (remote_get_trace_status): Initialize "filename"
10099 field with NULL instead of 0.
10101 2013-02-15 Yao Qi <yao@codesourcery.com>
10103 * remote.c: Fix a typo.
10105 2013-02-14 Pierre Muller <muller@sourceware.org>
10107 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
10109 2013-02-14 Pedro Alves <palves@redhat.com>
10111 * utils.c (savestring): Don't #undef it. Move function to
10112 common/common-utils.c.
10113 * common/common-utils.c: Include gdb_string.h.
10114 (savestring): Move here from utils.c.
10115 * common/common-utils.h (savestring): Declare.
10117 2013-02-14 Pedro Alves <palves@redhat.com>
10119 * utils.c (savestring): Rename parameter 'size' to 'len'.
10121 2013-02-14 Pedro Alves <palves@redhat.com>
10122 Yufeng Zhang <yufeng.zhang@arm.com>
10124 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
10125 (aarch64_inferior_data, struct aarch64_inferior_data):
10127 (struct aarch64_process_info): New.
10128 (aarch64_process_list): New global.
10129 (aarch64_find_process_pid, aarch64_add_process)
10130 (aarch64_process_info_get): New functions.
10131 (aarch64_inferior_data_get): Delete.
10132 (aarch64_process_info_get): New function.
10133 (aarch64_forget_process): New function.
10134 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
10135 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
10136 aarch64_get_debug_reg_state.
10137 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
10138 instead of linux_nat_iterate_watchpoint_lwps.
10139 (aarch64_linux_new_fork): New function.
10140 (aarch64_linux_child_post_startup_inferior): Use
10141 aarch64_forget_process instead of aarch64_init_debug_reg_state.
10142 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
10143 (aarch64_linux_remove_hw_breakpoint)
10144 (aarch64_handle_aligned_watchpoint)
10145 (aarch64_handle_unaligned_watchpoint)
10146 (aarch64_linux_insert_watchpoint)
10147 (aarch64_linux_remove_watchpoint)
10148 (aarch64_linux_stopped_data_address): Adjust to pass the current
10149 process id to aarch64_debug_reg_state.
10150 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
10151 linux_nat_new_fork hook, and aarch64_forget_process as
10152 linux_nat_forget_process hook; remove the call to
10153 register_inferior_data_with_cleanup.
10155 2013-02-14 Pedro Alves <palves@redhat.com>
10157 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
10158 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
10161 2013-02-14 Pedro Alves <pedro@codesourcery.com>
10162 Hafiz Abid Qadeer <abidh@codesourcery.com>
10164 * tracepoint.h (validate_trace_state_variable_name): Declare.
10165 * tracepoint.c (validate_trace_state_variable_name): New.
10166 (trace_variable_command): Parse the trace state variable's name
10167 without using parse_expression. Do several validations.
10168 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
10169 trace state variable's name with parse_expression. Validate it.
10171 2013-02-14 Yao Qi <yao@codesourcery.com>
10173 * infcmd.c (breakpoint_proceeded): Remove it.
10175 2013-02-14 Yao Qi <yao@codesourcery.com>
10177 * tracepoint.c (end_actions_pseudocommand): Make it static.
10178 (while_stepping_pseudocommand): Likewise.
10179 * tracepoint.h (end_actions_pseudocommand): Remove the
10181 (while_stepping_pseudocommand): Likewise.
10183 2013-02-14 Yao Qi <yao@codesourcery.com>
10185 * cli/cli-decode.c (help_cmd): Remove the declaration of
10187 (help_all): Likewise.
10189 2013-02-13 Pedro Alves <palves@redhat.com>
10191 * amd64-linux-nat.c (update_debug_registers_callback):
10193 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
10195 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
10196 i386_debug_reg_state.
10197 (amd64_linux_new_fork): New function.
10198 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
10199 linux_nat_new_fork hook, and i386_forget_process as
10200 linux_nat_forget_process hook.
10201 * i386-linux-nat.c (update_debug_registers_callback):
10203 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
10205 (i386_linux_prepare_to_resume): Pass the lwp's pid to
10206 i386_debug_reg_state.
10207 (i386_linux_new_fork): New function.
10208 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
10209 linux_nat_new_fork hook, and i386_forget_process as
10210 linux_nat_forget_process hook.
10211 * i386-nat.c (i386_init_dregs): Delete.
10212 (i386_inferior_data, struct i386_inferior_data):
10214 (struct i386_process_info): New.
10215 (i386_process_list): New global.
10216 (i386_find_process_pid, i386_add_process, i386_process_info_get):
10218 (i386_inferior_data_get): Delete.
10219 (i386_process_info_get): New function.
10220 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
10221 (i386_forget_process): New function.
10222 (i386_cleanup_dregs): Rewrite.
10223 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
10224 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
10225 (i386_stopped_data_address, i386_insert_hw_breakpoint)
10226 (i386_remove_hw_breakpoint): Adjust to pass the current process id
10227 to i386_debug_reg_state.
10228 (i386_use_watchpoints): Don't register inferior data.
10229 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
10231 (i386_forget_process): Declare.
10232 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
10233 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
10234 New static globals.
10235 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
10236 (add_initial_lwp): New, factored out from ...
10237 (add_lwp): ... this. Don't check the number of lwps before
10238 calling linux_nat_new_thread.
10239 (linux_nat_iterate_watchpoint_lwps): Delete.
10240 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
10241 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
10243 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
10245 (linux_nat_kill, linux_nat_mourn_inferior): Call
10246 linux_nat_forget_process.
10247 (linux_nat_set_new_fork, linux_nat_set_forget_process)
10248 (linux_nat_forget_process): New functions.
10249 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
10251 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
10252 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
10254 (linux_nat_set_new_fork, linux_nat_set_forget_process)
10255 (linux_nat_forget_process): New declarations.
10257 * amd64fbsd-nat.c (super_mourn_inferior): New global.
10258 (amd64fbsd_mourn_inferior): New function.
10259 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
10260 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
10262 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
10264 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
10267 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
10269 * aarch64-linux-nat.c (debug_reg_change_callback)
10270 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
10273 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
10275 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
10278 2013-02-13 Pedro Alves <palves@redhat.com>
10279 Hafiz Abid Qadeer <abidh@codesourcery.com>
10281 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
10283 2013-02-12 Tom Tromey <tromey@redhat.com>
10286 * c-exp.y (lex_one_token): Initialize other fields of yylval on
10288 (classify_inner_name): Remove 'first_name' argument, add
10289 'context'. Remove unused variable.
10290 (yylex): Explicitly maintain the context type. Exit loop earlier
10291 if NAME result is seen.
10293 2013-02-12 Pedro Alves <palves@redhat.com>
10295 * amd64-darwin-tdep.c: Add (C) after Copyright.
10296 * cli/cli-cmds.h: Ditto.
10297 * cli/cli-decode.c: Ditto.
10298 * cli/cli-decode.h: Ditto.
10299 * cli/cli-dump.c: Ditto.
10300 * cli/cli-dump.h: Ditto.
10301 * cli/cli-interp.c: Ditto.
10302 * cli/cli-logging.c: Ditto.
10303 * cli/cli-script.c: Ditto.
10304 * cli/cli-script.h: Ditto.
10305 * cli/cli-setshow.c: Ditto.
10306 * cli/cli-setshow.h: Ditto.
10307 * cli/cli-utils.c: Ditto.
10308 * cli/cli-utils.h: Ditto.
10309 * config/alpha/nm-osf3.h: Ditto.
10310 * config/djgpp/djconfig.sh: Ditto.
10311 * config/i386/nm-fbsd.h: Ditto.
10312 * config/i386/nm-i386gnu.h: Ditto.
10313 * config/nm-linux.h: Ditto.
10314 * config/nm-nto.h: Ditto.
10315 * config/rs6000/nm-rs6000.h: Ditto.
10316 * config/sparc/nm-sol2.h: Ditto.
10317 * darwin-nat-info.c: Ditto.
10320 * gdb-demangle.h: Ditto.
10321 * i386-darwin-nat.c: Ditto.
10322 * i386-darwin-tdep.c: Ditto.
10323 * linux-fork.h: Ditto.
10324 * m32c-tdep.c: Ditto.
10325 * microblaze-linux-tdep.c: Ditto.
10326 * microblaze-rom.c: Ditto.
10327 * microblaze-tdep.c: Ditto.
10328 * microblaze-tdep.h: Ditto.
10329 * mips-linux-tdep.h: Ditto.
10330 * ppc-ravenscar-thread.c: Ditto.
10331 * ppc-ravenscar-thread.h: Ditto.
10332 * prologue-value.c: Ditto.
10333 * prologue-value.h: Ditto.
10334 * ravenscar-thread.c: Ditto.
10335 * ravenscar-thread.h: Ditto.
10336 * sparc-ravenscar-thread.c: Ditto.
10337 * sparc-ravenscar-thread.h: Ditto.
10338 * tilegx-linux-tdep.c: Ditto.
10339 * unwind_stop_reasons.def: Ditto.
10340 * windows-nat.h: Ditto.
10341 * xtensa-linux-tdep.c: Ditto.
10342 * xtensa-xtregs.c: Ditto.
10343 * regformats/regdat.sh: Ditto.
10344 * regformats/regdef.h: Ditto.
10346 2013-02-12 Pedro Alves <palves@redhat.com>
10348 * break-catch-sig.c: Update copyright years.
10350 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
10352 Add support for a destructor for ui_out data and use it to
10353 provide a ui_out destructor.
10354 * ui-out.h: Declare the new ui_out destructor.
10355 (ui_out_impl): Add a field for data destructor in ui_out_impl.
10356 * ui-out.c (default_data_destroy): Add a default data destructor
10357 which does nothing.
10358 (default_ui_out_impl): Set the new data_destroy field to
10359 default_data_destroy
10360 (uo_data_destroy): Local function which invokes the data
10361 destructor if present.
10362 (clear_table): Local function which clears the table data of a
10364 (ui_out_destroy): Public function which frees a ui_out object.
10365 (ui_out_table_end): Use the new clear_table function.
10366 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
10368 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
10371 2013-02-11 Doug Evans <dje@google.com>
10373 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
10374 (printf_decfloat): New function. Broken out from ui_printf.
10375 Remove unnecessary code to shift the entire format string down.
10376 (printf_pointer): New function.
10377 (ui_printf): Code to print C strings, wide C strings, decfloats,
10378 and pointers moved to separate functions.
10380 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
10382 * valops.c (value_assign): Handling bitfield offset in
10383 `lval_internalvar_component' case.
10385 2013-02-08 Doug Evans <dje@google.com>
10387 * common/format.c (parse_format_string): Fix whitespace.
10389 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
10391 * stack.c (return_command): Work around uninitialized variable
10394 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
10396 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
10397 number of the registers from 36 to 34.
10399 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
10401 * NEWS: Mention new AArch64 native and target support.
10403 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
10405 * MAINTAINERS (Write After Approval): Add myself.
10407 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
10408 Marcus Shawcroft <marcus.shawcroft@arm.com>
10409 Nigel Stephens <nigel.stephens@arm.com>
10410 Yufeng Zhang <yufeng.zhang@arm.com>
10412 * aarch64-linux-nat.c: New file.
10413 * config/aarch64/linux.mh: New file.
10414 * configure.host: Add AArch64.
10415 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
10417 2013-02-07 Doug Evans <dje@google.com>
10419 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
10420 disassemble command.
10422 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
10424 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
10425 set_gdbarch_fetch_tls_load_module_address.
10427 2013-02-06 David S. Miller <davem@davemloft.net>
10429 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
10430 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
10431 * value.c (struct_return_convention): New function.
10432 (using_struct_return): Implement in terms of struct_return_convention.
10433 * value.h (struct_return_convention): Declare.
10434 * stack.c (return_command): Allow successful overriding of the return
10435 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
10437 2013-02-06 Tom Tromey <tromey@redhat.com>
10439 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
10440 outside of TRY_CATCH.
10442 2013-02-06 Yao Qi <yao@codesourcery.com>
10444 * mi/mi-interp.c: Include "tracepoint.h".
10445 (mi_tsv_modified): Declare.
10446 (mi_tsv_created, mi_tsv_deleted): Update declaration.
10447 (mi_interpreter_init): Call observer_attach_tsv_modified.
10448 (mi_tsv_modified): New.
10449 (mi_tsv_created, mi_tsv_deleted): Update.
10450 * tracepoint.c (trace_variable_command): Call
10451 observer_notify_tsv_modified if the initial value of tsv is
10453 (delete_trace_state_variable): Call
10454 observer_notify_tsv_deleted earlier.
10455 (trace_variable_command): Caller update.
10456 (create_tsv_from_upload): Likewise.
10457 * observer.sh: Declare "struct trace_state_variable".
10459 * NEWS: Mention the new MI notification "=tsv-modified".
10461 2013-02-05 Doug Evans <dje@google.com>
10463 * completer.c (location_completer): Fix typo in comment.
10465 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
10467 * breakpoint.c (add_location_to_breakpoint): Insert the location with
10470 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
10472 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
10473 Refactor if statement to avoid trailing || operator.
10475 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
10477 * NEWS: Add PowerPC FreeBSD as a new native configuration.
10479 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
10481 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
10482 * configure.host: Add powerpc*-*-freebsd* target.
10483 * configure.tgt: Add target info for powerpc*-*-freebsd*.
10484 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
10485 * config/powerpc/fbsd.mh: New file.
10487 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
10488 Denys Vlasenko <dvlasenk@redhat.com>
10489 Pedro Alves <palves@redhat.com>
10491 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
10492 (struct elf_internal_linux_prpsinfo): Forward declare.
10493 * gdbarch.h, gdbarch.c: Regenerate.
10494 * linux-tdep.c: Include `cli/cli-utils.h'.
10495 (linux_fill_prpsinfo): New function.
10496 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
10497 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
10498 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
10499 depending on gdbarch pointer bitness.
10500 * ppc-linux-tdep.c: Include elf-bfd.h.
10501 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
10504 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
10505 Marcus Shawcroft <marcus.shawcroft@arm.com>
10506 Nigel Stephens <nigel.stephens@arm.com>
10507 Yufeng Zhang <yufeng.zhang@arm.com>
10509 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
10511 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
10512 Marcus Shawcroft <marcus.shawcroft@arm.com>
10513 Nigel Stephens <nigel.stephens@arm.com>
10514 Yufeng Zhang <yufeng.zhang@arm.com>
10516 * aarch64-newlib-tdep.c: New file.
10517 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
10519 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
10520 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
10521 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
10522 * osabi.c (gdb_osabi_names): Add "Newlib".
10524 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
10525 Marcus Shawcroft <marcus.shawcroft@arm.com>
10526 Nigel Stephens <nigel.stephens@arm.com>
10527 Yufeng Zhang <yufeng.zhang@arm.com>
10529 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
10530 (ALLDEPFILES): Add aarch64-linux-tdep.c.
10531 * aarch64-linux-tdep.c: New file.
10532 * aarch64-linux-tdep.h: New file.
10533 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
10534 * configure.tgt: Add aarch64-none-linux-gnu.
10536 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
10537 Marcus Shawcroft <marcus.shawcroft@arm.com>
10538 Nigel Stephens <nigel.stephens@arm.com>
10539 Yufeng Zhang <yufeng.zhang@arm.com>
10541 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
10542 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
10543 (ALLDEPFILES): Add aarch64-tdep.c.
10544 * aarch64-tdep.c: New file.
10545 * aarch64-tdep.h: New file.
10546 * configure.tgt: Add AArch64.
10547 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
10548 (aarch64-expedite): New definition.
10549 * features/aarch64-core.xml: New file.
10550 * features/aarch64-fpu.xml: New file.
10551 * features/aarch64-without-fpu.c: New file (generated).
10552 * features/aarch64-without-fpu.xml: New file.
10553 * features/aarch64.c: New file (generated).
10554 * features/aarch64.xml: New file.
10555 * regformats/aarch64-without-fpu.dat: New file (generated).
10556 * regformats/aarch64.dat: New file (generated).
10558 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10560 * contrib/expect-read1.c: New file.
10561 * contrib/expect-read1.sh: New file.
10563 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10565 * dwarf2read.c (file_file_name): New function with code from
10567 (file_full_name): Move most of the code to file_file_name.
10568 (macro_start_file): Rename variable full_name to file_name and use
10569 file_file_name for it. Add comp_dir parameter to new_macro_table.
10570 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
10571 macro_source_file->filename access by macro_source_fullname call.
10572 * macroscope.c (_initialize_macroscope): Update the new_macro_table
10574 * macrotab.c (struct macro_table): New field comp_dir.
10575 (macro_include): New variables link_fullname and source_fullname.
10576 Replace any macro_source_file->filename access by macro_source_fullname
10578 (macro_lookup_inclusion): Remove the partial filenames checking code.
10579 (check_for_redefinition): New variables source_fullname and
10580 found_key_fullname. Replace any macro_source_file->filename access by
10581 macro_source_fullname call.
10582 (macro_undef): New variables source_fullname and key_fullname. Replace
10583 any macro_source_file->filename access by macro_source_fullname call.
10584 (macro_lookup_definition): New variables retval and source_fullname.
10585 Replace any macro_source_file->filename access by macro_source_fullname
10587 (foreach_macro): New variable key_fullname. Replace any
10588 macro_source_file->filename access by macro_source_fullname call.
10589 (foreach_macro_in_scope): New variable datum_fullname. Replace any
10590 macro_source_file->filename access by macro_source_fullname call.
10591 (new_macro_table): Add parameter comp_dir. Initialize T with it.
10592 (macro_source_fullname): New function.
10593 * macrotab.h (struct macro_source_file): Extent the filename field
10595 (new_macro_table): New parameter comp_dir, add a comment for it.
10596 (macro_source_fullname): new declaration.
10598 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10600 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
10601 this_real_name to outer block. Use it also for
10602 compare_filenames_for_search.
10603 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
10604 with dw2_get_real_path for file_matcher, considering also
10605 BASENAMES_MAY_DIFFER.
10606 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
10608 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10610 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
10611 to the file_matcher parameter. Pass 0 to it.
10612 (dwarf2_create_include_psymtab): Copy also DIRNAME.
10613 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
10614 NULL psymtab_to_fullname result.
10615 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
10616 an expected filename instead.
10617 (expand_symtabs_matching_via_partial): Add basenames parameter to the
10618 file_matcher parameter. Call also psymtab_to_fullname, after newly
10619 considering BASENAMES_MAY_DIFFER.
10620 * source.c (rewrite_source_path): Remove static.
10621 * source.h (rewrite_source_path): New declaration.
10622 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
10623 the expand_symtabs_matching field. Comment it.
10624 * symtab.c (file_matches): New function comment. Add parameter
10625 basenames, implement it.
10626 (search_symbols_file_matches): Add basenames parameter. Update the
10627 file_matches caller.
10628 (search_symbols): Match FILES also against symtab_to_fullname.
10629 Optimize it for BASENAMES_MAY_DIFFER.
10631 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10633 * source.c (print_source_lines_base): Print for TUI also "fullname".
10634 * tui/tui-data.c (init_content_element): Change tui_locator_element
10635 field to full_name.
10636 * tui/tui-data.h (struct tui_locator_element): Likewise.
10637 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
10638 tui_update_locator_filename calls to tui_update_locator_fullname.
10639 Replace symtab->filename refererence by symtab_to_fullname call.
10640 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
10641 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
10642 field to full_name. Replace symtab->filename refererence by
10643 symtab_to_fullname call.
10644 (tui_show_symtab_source): Rename parameter to fullname. Change
10645 tui_locator_element field to full_name.
10646 * tui/tui-stack.c: Include source.h.
10647 (tui_set_locator_filename): Rename the declaration to ...
10648 (tui_set_locator_fullname): ... here. Rename its parameter to
10649 fullname, updates its comment.
10650 (tui_set_locator_info): Rename its parameter to fullname.
10651 (tui_set_locator_filename): Rename the definition to ...
10652 (tui_set_locator_fullname): ... here. Rename its parameter to
10653 fullname, updates its comment. Change tui_locator_element field to
10655 (tui_set_locator_info): Rename its parameter to fullname.
10656 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
10657 (tui_update_locator_filename): Rename to ...
10658 (tui_update_locator_fullname): ... here. Rename callee to
10659 tui_set_locator_fullname.
10660 (tui_show_frame_info): Replace symtab->filename refererence by
10661 symtab_to_fullname call.
10662 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
10663 (tui_update_locator_fullname): ... here.
10664 * tui/tui-winsource.c (tui_display_main): Rename the callee to
10665 tui_update_locator_fullname. Replace symtab->filename refererence by
10666 symtab_to_fullname call.
10667 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
10668 Rename the callee to tui_update_locator_fullname.
10669 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
10671 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10673 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
10674 by symtab_to_filename_for_display calls.
10675 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
10676 (clear_command): New variable sal_fullname, initialize it. Replace
10677 compare_filenames_for_search by filename_cmp with sal_fullname.
10678 (say_where, update_static_tracepoint): Replace symtab->filename
10679 refererences by symtab_to_filename_for_display calls.
10680 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
10682 * dwarf2read.c: Include source.h.
10683 (fixup_go_packaging): Replace symtab->filename refererences by
10684 symtab_to_filename_for_display calls.
10685 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
10686 Replace symtab->filename refererences by symtab_to_filename_for_display
10688 (create_sals_line_offset, convert_linespec_to_sals): New variable
10689 fullname, initialize it, replace symtab->filename reference by the
10691 * linux-fork.c: Include source.h.
10692 (info_checkpoints_command): Replace symtab->filename refererences by
10693 symtab_to_filename_for_display calls.
10694 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
10695 by symtab_to_filename_for_display calls.
10696 * mdebugread.c: Include source.h.
10697 (psymtab_to_symtab_1): Replace symtab->filename refererences by
10698 symtab_to_filename_for_display calls.
10699 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
10700 (mi_cmd_file_list_exec_source_files): Likewise.
10701 * printcmd.c: Include source.h.
10702 (build_address_symbolic): Replace symtab->filename refererences by
10703 symtab_to_filename_for_display calls.
10704 * psymtab.c (partial_map_symtabs_matching_filename)
10705 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
10706 with psymtab_to_fullname.
10707 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
10708 by symtab_to_filename_for_display calls.
10709 (stpy_get_filename): New variable filename, initialize it, use instead
10710 of symtab->filename refererences.
10711 (salpy_str): Make variable filename const char *. Replace
10712 symtab->filename refererences by symtab_to_filename_for_display calls.
10713 * skip.c: Include source.h and filenames.h.
10714 (skip_file_command): Remove const from the symtab variable. Replace
10715 symtab->filename refererences by symtab_to_fullname call.
10716 (function_name_is_marked_for_skip): New variables searched_for_fullname
10717 and fullname. Use them to search also with symtab's fullname.
10718 * source.c (find_source_lines): Replace symtab->filename refererences
10719 by symtab_to_filename_for_display calls.
10720 (print_source_lines_base): New variable filename, use it instead of
10721 symtab->filename. Replace symtab->filename refererences by
10722 symtab_to_filename_for_display calls.
10723 (line_info, forward_search_command): Replace symtab->filename
10724 refererences by symtab_to_filename_for_display calls.
10725 (reverse_search_command): Replace symtab->filename refererences by
10726 symtab_to_filename_for_display calls. New variable filename for it.
10727 * stack.c (frame_info): Likewise.
10728 * symmisc.c: Include source.h.
10729 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
10730 (maintenance_info_symtabs): Replace symtab->filename refererences by
10731 symtab_to_filename_for_display calls.
10732 * symtab.c (iterate_over_some_symtabs): Call
10733 compare_filenames_for_search also with symtab_to_fullname.
10734 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
10735 symtab->filename refererences by symtab_to_filename_for_display calls.
10736 (find_line_symtab): Replace symtab->filename refererences by
10737 symtab_to_filename_for_display calls.
10738 (file_matches): Replace filename_cmp by compare_filenames_for_search.
10739 (print_symbol_info): Make the last parameter const char *. New
10740 variable s_filename. Use it in the function.
10741 (symtab_symbol_info): Make the last_filename variable const char *.
10742 Replace symtab->filename refererences by symtab_to_filename_for_display
10744 (rbreak_command): New variable fullname. Use it. Replace
10745 symtab->filename refererence by symtab_to_filename_for_display call.
10746 * tracepoint.c (set_traceframe_context, trace_find_line_command)
10747 (print_one_static_tracepoint_marker): Replace symtab->filename
10748 refererences by symtab_to_filename_for_display calls.
10749 * tui/tui-source.c (tui_set_source_content): New variables filename and
10750 s_filename. Replace symtab->filename refererences by this variable.
10751 Replace other symtab->filename refererences by
10752 symtab_to_filename_for_display calls.
10754 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
10755 Jan Kratochvil <jan.kratochvil@redhat.com>
10757 Add a new variable that controls a way in which filenames are
10759 * NEWS (set filename-display): New entry.
10760 * source.c (filename_display_basename, filename_display_relative)
10761 (filename_display_absolute, filename_display_kind_names)
10762 (filename_display_string, show_filename_display_string)
10763 (symtab_to_filename_for_display): New.
10764 (_initialize_source): Added initialization of 'filename-display'
10766 * source.h (symtab_to_filename_for_display): Added declaration.
10767 * stack.c (print_frame): Added new variable and calling of a new
10768 function and condition with this variable. Changed third argument of
10769 calling of a function.
10771 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10773 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
10774 Rename field reference filename to fullname.
10775 * tui/tui-data.h (struct tui_source_info): Rename field filename to
10776 fullname. New comment for it.
10777 * tui/tui-source.c (tui_set_source_content): Rename field reference
10778 filename to fullname. Initialize field by symtab_to_fullname now.
10779 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
10780 reference filename to fullname. Use symtab_to_fullname during
10783 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10786 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
10787 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
10788 filename to fullname. Rename variable this_name to this_fullname.
10789 Lowercase FILENAME_CMP call.
10790 (dw2_find_symbol_file): New comment for the returned string.
10791 (dwarf2_gdb_index_functions): Rename the function to
10792 dw2_expand_symtabs_with_fullname.
10793 * psymtab.c (read_psymtabs_with_filename): Rename to ...
10794 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
10796 (psym_functions): Rename the function to read_psymtabs_with_fullname.
10797 * symfile.h (struct quick_symbol_functions): Rename field
10798 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
10799 parameter filename to fullname. Document returned string meaning for
10801 * symtab.c (find_line_symtab): Rename the called function to
10802 expand_symtabs_with_fullname.
10804 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10807 * breakpoint.c (clear_command): Remove variable is_abs, unify the
10808 call of filename_cmp with compare_filenames_for_search.
10809 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
10810 is_abs, unify the call of FILENAME_CMP with
10811 compare_filenames_for_search. New gdb_asserts for real_path and name.
10812 Unify the call of compare_filenames_for_search with FILENAME_CMP.
10813 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
10814 * symfile.h (struct quick_symbol_functions): Extend the comment for
10815 map_symtabs_matching_filename.
10816 * symtab.c (compare_filenames_for_search): Remove the function comment
10817 relative path requirement. Handle absolute filenames, with a comment.
10818 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
10819 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
10820 real_path and name. Unify the call of compare_filenames_for_search
10822 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
10824 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10827 * breakpoint.c (print_breakpoint_location): Replace bp_location field
10828 source_file references by symtab field references. Remove variables
10830 (momentary_breakpoint_from_master, add_location_to_breakpoint):
10831 (clear_command, say_where): Replace bp_location field source_file
10832 references by symtab field references.
10833 (bp_location_dtor): Remove the source_file reference.
10834 (update_static_tracepoint): Replace bp_location field source_file
10835 references by symtab field references.
10836 (breakpoint_free_objfile): New function.
10837 * breakpoint.h (struct bp_location): Extend the comment for line_number.
10838 Replace the field source_file by field symtab, extend its comment.
10839 (breakpoint_free_objfile): New declaration.
10840 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
10841 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
10842 field source_file references by symtab field references.
10844 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10846 Replace xfullpath calls by gdb_realpath calls.
10847 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
10849 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
10850 Remove it from the iterate_over_some_symtabs call.
10851 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
10852 Remove it from the dw2_map_expand_apply calls, remove a block handling
10854 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
10855 Remove it from the iterate_over_some_symtabs call.
10856 (partial_map_symtabs_matching_filename): Remove parameter full_path.
10857 Remove it from the partial_map_expand_apply calls, remove a block
10858 handling it. Drop gdb_realpath call and cleanups from the real_path
10860 * source.c (openp): Drop the comment part about xfullpath. Replace
10861 xfullpath calls by gdb_realpath calls.
10862 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
10863 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
10864 from method map_symtabs_matching_filename and its comment.
10865 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
10867 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
10868 remove it also from the function comment, remove a block handling it.
10869 Drop gdb_realpath call and cleanups from the real_path handling.
10870 (iterate_over_symtabs): Drop variable full_path and its use.
10871 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
10872 * utils.c (xfullpath): Remove.
10873 * utils.h (xfullpath): Remove.
10875 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
10877 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
10878 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
10879 (ALLDEPFILES): Add ppc64-tdep.c.
10880 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
10881 ppc64-tdep.o to gdb_target_obs.
10882 * ppc64-tdep.h: New file.
10883 * ppc64-tdep.c: New file.
10884 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
10885 ppc-linux-tdep.c to here.
10886 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
10887 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
10888 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
10889 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
10890 from ppc-linux-tdep.c to here.
10891 (ppc64_convert_from_func_ptr_addr): Rename from
10892 ppc64_linux_convert_from_func_ptr_addr to
10893 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
10896 (read_insn): Move from ppc-linux-tdep.c to here.
10897 (insns_match_pattern, insn_d_field, insn_ds_field): Move
10898 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
10899 * ppc-linux-tdep.c: Include ppc64-tdep.h.
10900 Removed above functions.
10901 (ppc_linux_init_abi): Adjust.
10903 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
10905 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
10907 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
10909 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
10911 2013-02-01 Pedro Alves <palves@redhat.com>
10913 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
10914 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
10916 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
10918 * elfread.c (elf_symfile_read): Limit separate debug info additions to
10919 files with no separate debug info.
10920 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
10921 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
10922 only for files with no separate debug info.
10924 2013-01-31 Tom Tromey <tromey@redhat.com>
10926 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
10928 (struct jit_program_space_data): Rename from jit_inferior_data.
10930 (get_jit_program_space_data): Rename from get_jit_inferior_data.
10931 Change return type. Attach data to program space.
10932 (jit_program_space_data_cleanup): Rename from
10933 jit_inferior_data_cleanup; change argument type.
10934 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
10936 (jit_register_code): Update.
10937 (jit_update_inferior_cache): Remove.
10938 (jit_breakpoint_deleted): Get jit data from the location's program
10940 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
10941 'ps_data', change type.
10942 (jit_inferior_init, jit_breakpoint_re_set_internal)
10943 (jit_event_handler): Update.
10944 (free_objfile_data): Get data from objfile's program space.
10945 (_initialize_jit): Update.
10947 2013-01-31 Tom Tromey <tromey@redhat.com>
10950 * jit.c (struct jit_inferior_data) <cached_code_address,
10951 jit_breakpoint>: New fields.
10952 (jit_breakpoint_re_set_internal): Fix logging. Only create
10953 breakpoint if cached address has changed.
10954 (jit_update_inferior_cache, jit_breakpoint_deleted): New
10956 (_initialize_jit): Register breakpoint deleted observer.
10958 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10960 * infrun.c (handle_syscall_event): Remove unused gdbarch.
10961 (save_infcall_suspend_state): Ifdef out unused inf.
10962 (restore_infcall_suspend_state): Ifdef out unused inf.
10963 * jit.c (jit_register_code): Remove unused i, b, inf_data.
10964 (jit_frame_sniffer): Remove unused inf_data.
10966 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10968 * c-exp.y (classify_inner_name): Remove unused type.
10969 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
10970 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
10972 (c_get_string): Remove unused kind.
10973 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
10975 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10977 * charset.c (intermediate_encoding): Remove unused i.
10978 * completer.c (signal_completer): Remove unused i.
10979 * continuations.c (discard_my_continuations_1): Remove unused
10981 * corelow.c (core_close): Remove unuseD name.
10982 (get_core_siginfo): Remove unused pid.
10983 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
10985 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
10986 (loclist_describe_location): Remove unused first.
10987 * event-top.c (command_line_handler): Remove unused got_eof.
10988 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
10989 (resize_section_table): Remove unused old_value.
10990 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
10991 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
10992 * i386-tdep.c (i386_process_record): Remove unused rex.
10993 * infcmd.c (get_return_value): Remove unused uiout.
10994 * jv-lang.c (type_from_class): Remove unused is_array.
10995 * jv-valprint.c (java_val_print): Remove unused i.
10996 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
10997 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
10998 * m2-typeprint.c (m2_print_type): Remove unused code.
10999 * macroexp.c (get_character_constant): Remove unused body_start.
11000 (macro_stringify): Remove unused result.
11001 * objc-lang.c (find_methods): Remove unused gdbarch.
11002 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
11003 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
11004 * stack.c (print_frame_args): Remove unused summary.
11005 * thread.c (thread_apply_command): Remove unused p.
11006 * valarith.c (value_x_unop): Remove unused mangle_ptr.
11007 * valops.c (search_struct_method): Remove unused skip.
11008 * valprint.c (generic_val_print): Remove unused byte_order.
11009 * varobj.c (varobj_update): Remove unused changed.
11010 * cli/cli-cmds.c (complete_command): Remove unused next_item.
11011 (alias_command): Remove unused c.
11012 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
11013 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
11015 (mi_cmd_data_write_memory): Remove unused word_format.
11016 (mi_cmd_data_write_memory_bytes): Remove unused r.
11017 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
11019 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
11020 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
11023 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
11025 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
11026 * symtab.c (iterate_over_symtabs): Remove unused s.
11027 (find_pc_sect_symtab): Remove unused pspAce.
11028 (find_pc_sect_line): Remove unused alt_symtab.
11029 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
11030 (completion_list_add_name): Remove unused newsize.
11032 2013-01-31 Tom Tromey <tromey@redhat.com>
11035 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
11038 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
11040 * target.c (target_read_string): Remove unused origlen.
11042 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
11044 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
11045 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
11046 * ax-general.c (ax_print): Remove unused is_float.
11047 * blockframe.c (block_innermost_frame): Remove unused start, end.
11048 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
11050 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
11052 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
11053 (svr4_read_so_list): Remove unused lmo.
11054 * solib-target.c (solib_target_relocate_section_addresses): Remove
11057 2013-01-30 Tom Tromey <tromey@redhat.com>
11059 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
11061 2013-01-30 Tom Tromey <tromey@redhat.com>
11063 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
11064 * utils.c (gnu_debuglink_crc32): Remove.
11065 * utils.h (gnu_debuglink_crc32): Don't declare.
11067 2013-01-30 Tom Tromey <tromey@redhat.com>
11069 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
11070 (read_structure_type, read_enumeration_type): Remove cast.
11072 2013-01-30 Tom Tromey <tromey@redhat.com>
11074 * dwarf2read.c (read_namespace_type): Remove cast.
11075 (read_typedef): Likewise.
11077 2013-01-29 Tom Tromey <tromey@redhat.com>
11079 * dwarf2read.c (free_dwo_file): Remove assert.
11081 2013-01-29 Tom Tromey <tromey@redhat.com>
11083 * value.c (deprecated_set_value_modifiable): Remove.
11084 * value.h (deprecated_set_value_modifiable): Remove.
11086 2013-01-28 Doug Evans <dje@google.com>
11088 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
11089 to addresses from dwo files.
11091 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
11093 * valops.c (find_overload_match): Remove unused argument 'lax'.
11094 * value.h: Remove unused argument 'lax' from the declaration of
11095 find_overload_match.
11096 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
11097 to find_overload_match.
11098 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
11099 argument to find_overload_match.
11101 2013-01-25 Tom Tromey <tromey@redhat.com>
11103 * dwarf2read.c (processing_has_namespace_info): Remove.
11104 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
11105 (process_die, read_func_scope, dwarf2_start_symtab)
11106 (new_symbol_full): Update.
11108 2013-01-25 Tom Tromey <tromey@redhat.com>
11110 * cp-namespace.c (cp_set_block_scope): Remove.
11111 * cp-support.h (cp_set_block_scope): Remove.
11112 * dbxread.c: Include block.h.
11113 (cp_set_block_scope): New function.
11114 (process_one_symbol): Update.
11115 * dwarf2read.c (read_func_scope): Use block_set_scope.
11117 2013-01-25 Pedro Alves <palves@redhat.com>
11119 * remote.c (add_current_inferior_and_thread): Tweak comment.
11121 2013-01-25 Tom Tromey <tromey@redhat.com>
11123 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
11124 (cp_add_using_directive): Add 'copy_names' argument.
11125 * cp-support.h (cp_add_using_directive): Update.
11126 (struct using_direct) <import_src, import_dest, alias,
11127 declaration>: Now const.
11128 * dwarf2read.c (read_import_statement): Use obconcat.
11129 Don't copy names passed to cp_add_using_directive.
11131 2013-01-25 Tom Tromey <tromey@redhat.com>
11133 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
11135 2013-01-25 Pedro Alves <palves@redhat.com>
11137 * remote.c (stop_reply_extract_thread): New.
11138 (add_current_inferior_and_thread): New parameter 'wait_status'.
11140 (remote_start_remote): Pass wait status to
11141 add_current_inferior_and_thread.
11142 (extended_remote_run): Update comment.
11143 (extended_remote_create_inferior_1): Pass wait status to
11144 add_current_inferior_and_thread.
11146 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
11147 Ulrich Weigand <uweigand@de.ibm.com>
11149 * valarith.c (value_vector_widen): New function for replicating a
11150 scalar into a vector.
11151 (value_binop): Use value_vector_widen to widen scalar to vector
11152 rather than casting, this better matches gcc C behaviour.
11153 * valops.c (value_casst): Update logic for casting between vector
11154 types, and for casting from scalar to vector, try to match gcc C
11156 * value.h (value_vector_widen): Declare.
11157 * opencl-lang.c (opencl_value_cast): New opencl specific casting
11158 function, handle special case for casting scalar to vector.
11159 (opencl_relop): Use opencl_value_cast.
11160 (evaluate_subexp_opencl): Use opencl_value_cast instead of
11161 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
11162 in order to use opencl_value_cast.
11164 2013-01-25 Yao Qi <yao@codesourcery.com>
11166 * event-loop.c: Include "queue.h".
11167 (gdb_event_p): New typedef.
11168 (DECLARE_QUEUE_P): Use.
11169 (DEFINE_QUEUE_P): Use.
11170 (async_queue_event): Remove.
11171 (gdb_event_xfree): New.
11172 (initialize_event_loop): New.
11173 (process_event): Use QUEUE macros.
11174 (event_queue): Remove.
11175 (gdb_wait_for_event): Caller update.
11176 (check_async_event_handlers): Likewise.
11177 (poll_timers): Likewise.
11178 * event-loop.h (initialize_event_loop): Declare.
11179 * event-loop.c (gdb_event_xfree): New.
11180 * top.c (gdb_init): Call initialize_event_loop.
11182 2013-01-25 Yao Qi <yao@codesourcery.com>
11184 * event-loop.c (async_queue_event): Remove one parameter
11185 'position'. Remove code handling 'position' == TAIL.
11186 (gdb_wait_for_event): Caller update.
11187 (check_async_event_handlers): Caller update.
11188 (poll_timers): Caller update.
11189 * event-loop.h (enum queue_position): Remove.
11191 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
11193 * MAINTAINERS: Update my email.
11195 2013-01-25 Yao Qi <yao@codesourcery.com>
11197 * main.c (print_gdb_help): Remove "--epoch" from the help
11200 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
11202 * symtab.c (skip_prologue_using_sal): Consider a file
11203 change the same as an increased line number
11205 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
11207 * MAINTAINERS (Write After Approval): Add myself to the list.
11209 2013-01-24 Tom Tromey <tromey@redhat.com>
11211 * ada-lang.h (ada_decode_symbol): Make return type const.
11212 * ada-lang.c (ada_decode_symbol): Likewise.
11214 2013-01-23 Doug Evans <dje@google.com>
11216 * linespec.c (find_linespec_symbols): Make static.
11218 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
11220 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
11221 type on float conversion for complex type.
11223 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
11225 Add a new class gdb.Architecture which exposes GDB's
11226 internal representation of architecture via GDB Python API.
11227 * Makefile.in: Add entries corresponding to the new file
11229 * NEWS (Python Scripting): Add entries for the new class
11230 gdb.Architecture and the new method gdb.Frame.architecture.
11231 * python/py-arch.c: Implement gdb.Architecture class.
11232 * python/py-frame.c (frapy_arch): Implement the method
11233 gdb.Frame.architecture().
11234 (frame_object_methods): Add 'architecture' to the method table.
11235 * python/python-internal.h: Add declarations of new utility
11237 * python/python.c (_initialize_python): Initialize
11238 gdb.Architecture class.
11240 2013-01-23 Doug Evans <dje@google.com>
11242 Work around binutils/15021.
11243 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
11244 type_unit_group out of union s. All uses updated.
11245 (read_index_from_section): Watch for index version 8.
11246 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
11247 an imported symtab.
11248 (write_psymtabs_to_index): Increment version number to 8.
11250 2013-01-22 Pedro Alves <palves@redhat.com>
11252 * annotate.c (breakpoint_changed): Skip if breakpoint is not
11255 2013-01-22 Pedro Alves <palves@redhat.com>
11257 * annotate.c (annotate_breakpoints_changed): Rename to ...
11258 (annotate_breakpoints_invalid): ... this. Make static.
11259 (breakpoint_changed): Adjust.
11260 (_initialize_annotate): Always install the observers. Install a
11261 "breakpoint_created" observer.
11262 * annotate.h (annotate_breakpoints_changed): Delete declaration.
11263 * breakpoint.c (set_breakpoint_condition)
11264 (breakpoint_set_commands, do_map_commands_command)
11265 (init_raw_breakpoint, clear_command, set_ignore_count)
11266 (enable_breakpoint_disp): No longer call
11267 annotate_breakpoints_changed.
11269 2013-01-22 Pedro Alves <palves@redhat.com>
11271 * annotate.c: Include "inferior.h".
11272 (frames_invalid_emitted)
11273 (breakpoints_invalid_emitted): New globals.
11274 (async_background_execution_p): New function.
11275 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
11276 emitting the annotation if it has already been emitted.
11277 (annotate_display_prompt): New function.
11278 * annotate.h (annotate_display_prompt): New declaration.
11279 * event-top.c: Include annotate.h.
11280 (display_gdb_prompt): Call annotate_display_prompt.
11282 2013-01-22 Pedro Alves <palves@redhat.com>
11284 * annotate.c (ignore_count_changed): Delete.
11285 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
11286 (annotate_ignore_count_change): Delete.
11287 (annotate_stopped): Don't emit a delayed breakpoints-changed
11289 * annotate.h (annotate_ignore_count_change): Delete.
11290 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
11291 annotate_ignore_count_change.
11293 2013-01-22 Tom Tromey <tromey@redhat.com>
11295 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
11296 require_rvalue for a register location.
11298 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
11300 * breakpoint.c (print_one_breakpoint_location): Add MI
11301 field 'thread-groups' when printing a breakpoint.
11302 (output_thread_groups): New function.
11304 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
11306 * python/lib/gdb/commands/explore.py
11307 (CompoundExplorer.explore_expr): Correct the name of a method
11309 (ExploreTypeCommand.invoke): Add a missing 'return'.
11311 2013-01-21 Tom Tromey <tromey@redhat.com>
11313 * gdb_obstack.h (obconcat): Move declaration here, from...
11314 * symfile.h (obconcat): ... here.
11315 * gdb_obstack.c: New file.
11316 (obconcat): Move from...
11317 * symfile.c (obconcat): ... here.
11318 * Makefile.in (SFILES): Add gdb_obstack.c.
11319 (COMMON_OBS): Add gdb_obstack.o.
11321 2013-01-21 Tom Tromey <tromey@redhat.com>
11323 * symfile.h (obsavestring): Don't declare.
11324 * symfile.c (obsavestring): Remove.
11325 * ada-exp.y: Use obstack_copy0, not obsavestring.
11326 * ada-lang.c: Use obstack_copy0, not obsavestring.
11327 * coffread.c: Use obstack_copy0, not obsavestring.
11328 * cp-namespace.c: Use obstack_copy0, not obsavestring.
11329 * dbxread.c: Use obstack_copy0, not obsavestring.
11330 * dwarf2read.c: Use obstack_copy0, not obsavestring.
11331 * jit.c: Use obstack_copy0, not obsavestring.
11332 * mdebugread.c: Use obstack_copy0, not obsavestring.
11333 * psymtab.c: Use obstack_copy0, not obsavestring.
11334 * stabsread.c: Use obstack_copy0, not obsavestring.
11335 * xcoffread.c: Use obstack_copy0, not obsavestring.
11337 2013-01-21 Tom Tromey <tromey@redhat.com>
11339 * dwarf2read.c (fixup_go_packaging): Save package name
11340 on objfile obstack.
11341 * gdbtypes.c (init_type): Don't copy name.
11343 2013-01-21 Tom Tromey <tromey@redhat.com>
11345 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
11347 (struct attribute) <u.str>: Now const.
11348 (struct fnfieldlist) <name>: Now const.
11349 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
11350 (partial_die_parent_scope): Make return type const.
11351 (partial_die_full_name, add_partial_symbol): Update.
11352 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
11354 (find_file_and_directory): Make 'name' and 'comp_dir' const.
11355 (read_file_scope, read_func_scope, dwarf2_add_field)
11356 (dwarf2_add_member_fn, read_structure_type)
11357 (process_enumeration_scope, read_array_type, read_module_type)
11358 (read_base_type, read_subrange_type): Update.
11359 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
11360 (new_symbol_full, guess_full_die_structure_name): Update.
11361 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
11362 (dwarf2_name): Return const type.
11363 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
11366 2013-01-21 Tom Tromey <tromey@redhat.com>
11368 * gdbtypes.c (init_type): Make 'name' const.
11369 * gdbtypes.h (init_type): Update.
11371 2013-01-21 Tom Tromey <tromey@redhat.com>
11373 * buildsym.c (patch_subfile_names): Use set_last_source_file.
11374 (start_symtab): Make 'name' and 'dirname' const. Use
11375 set_last_source_file.
11376 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
11377 (last_source_file): Define. Now static.
11378 (set_last_source_file, get_last_source_file): New functions.
11379 * buildsym.h (last_source_file): Don't declare.
11380 (start_symtab): Update.
11381 (set_last_source_file, get_last_source_file): Declare.
11382 * coffread.c (complete_symtab): Use set_last_source_file.
11383 (coff_end_symtab): Likewise.
11384 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
11385 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
11386 set_last_source_file.
11387 (process_one_symbol): Use get_last_source_file.
11388 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
11389 (psymtab_to_symtab_1): Use get_last_source_file.
11390 * xcoffread.c (process_linenos): Use get_last_source_file.
11391 (complete_symtab): Use set_last_source_file.
11392 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
11393 (scan_xcoff_symtab): Use set_last_source_file.
11395 2013-01-21 Tom Tromey <tromey@redhat.com>
11397 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
11398 (symbol_set_names): Remove casts. Handle field const-ness.
11400 2013-01-21 Tom Tromey <tromey@redhat.com>
11402 * dwarf2read.c (new_symbol_full): Remove cast.
11403 * symtab.c (symbol_set_demangled_name): Make 'name' const.
11404 * symtab.h (symbol_set_demangled_name): Update.
11406 2013-01-21 Tom Tromey <tromey@redhat.com>
11408 * main.c (captured_main): Call bfd_init.
11410 2013-01-21 Tom Tromey <tromey@redhat.com>
11412 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
11413 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
11414 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
11417 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
11419 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
11421 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
11423 Fix gdb.fortran/common-block.exp crash in PIE mode.
11424 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
11426 * f-valprint.c (info_common_command_for_block): Expect
11427 LOC_COMMON_BLOCK in gdb_assert.
11428 * symtab.h (struct general_symbol_info): Update comment for the
11429 common_block member.
11430 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
11431 (enum address_class): New member LOC_COMMON_BLOCK.
11433 2013-01-18 David Blaikie <dblaikie@gmail.com>
11435 * MAINTAINERS (Write After Approval): Add "David Blaikie".
11437 2013-01-18 Tom Tromey <tromey@redhat.com>
11440 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
11441 Call require_rvalue.
11443 2013-01-18 Yao Qi <yao@codesourcery.com>
11445 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
11446 (dbx_read_symtab): New declaration.
11447 (dbx_psymtab_to_symtab): Delete.
11448 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
11449 Rename parameter PST to SELF. Exchanged two parameters.
11450 (start_psymtab): Caller update.
11451 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
11452 (dwarf2_read_symtab): New declaration.
11453 (dwarf2_psymtab_to_symtab): Delete.
11454 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
11455 Rename parameter PST to SELF. Exchanged two parameters.
11456 (create_partial_symtab): Caller update.
11457 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
11458 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
11459 Rename parameter PST to SELF. Exchanged two parameters.
11460 (parse_partial_symbols, new_psymtab): Caller update.
11461 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
11463 * psymtab.c (psymtab_to_symtab): Caller update.
11464 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
11465 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
11466 Rename parameter PST to SELF. Exchanged two parameters.
11467 (xcoff_start_psymtab): Caller update.
11469 2013-01-18 Yao Qi <yao@codesourcery.com>
11471 * infrun.c (proceed): Rename local variable 'oneproc' to
11474 2013-01-17 Doug Evans <dje@google.com>
11476 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
11477 (dw2_build_type_unit_groups): Delete. All uses updated.
11479 * symtab.h (struct symbol_search): Add comment.
11481 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
11483 * symtab.c (compare_filenames_for_search): New comment for
11486 2013-01-17 Tom Tromey <tromey@redhat.com>
11488 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
11490 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
11492 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
11493 initialize it by existing make_cleanup. Call new do_cleanups.
11495 2013-01-17 Tom Tromey <tromey@redhat.com>
11497 * cp-abi.c (cp_abi_completer): New function.
11498 (_initialize_cp_abi): Set completer for "set cp-abi".
11500 2013-01-17 Tom Tromey <tromey@redhat.com>
11502 * mem-break.c: Remove obsolete comment.
11503 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
11505 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
11507 * jit.c (jit_reader_load_command): Interpret the jit reader name
11508 as an absolute path if it begins with a forward slash.
11510 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
11514 * jit.c (finalize_symtab): Ensure that only the global block has a
11517 2013-01-17 Pedro Alves <palves@redhat.com>
11519 * acinclude.m4: Include ../config/plugins.m4,
11520 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
11521 * Makefile.in (aclocal_m4_deps): Update.
11522 * aclocal.m4: Renegerate.
11524 2013-01-16 Doug Evans <dje@google.com>
11526 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
11528 2013-01-16 Pedro Alves <palves@redhat.com>
11529 Tom Tromey <tromey@redhat.com>
11532 * NEWS: Add "catch signal".
11533 * breakpoint.c (base_breakpoint_ops): No longer static.
11534 (bpstat_explains_signal): New function.
11535 (init_catchpoint): No longer static.
11536 (base_breakpoint_explains_signal): New function.
11537 (base_breakpoint_ops): Initialize new field.
11538 * breakpoint.h (enum bpstat_signal_value): New.
11539 (struct breakpoint_ops) <explains_signal>: New field.
11540 (bpstat_explains_signal): Remove macro, declare as function.
11541 (base_breakpoint_ops, init_catchpoint): Declare.
11542 * break-catch-sig.c: New file.
11543 * inferior.h (signal_catch_update): Declare.
11544 * infrun.c (signal_catch): New global.
11545 (handle_syscall_event): Update for change to
11546 bpstat_explains_signal.
11547 (handle_inferior_event): Likewise. Always handle random signals
11549 (signal_cache_update): Check signal_catch.
11550 (signal_catch_update): New function.
11551 (_initialize_infrun): Initialize signal_catch.
11552 * Makefile.in (SFILES): Add break-catch-sig.c.
11553 (COMMON_OBS): Add break-catch-sig.o.
11555 2013-01-16 Tom Tromey <tromey@redhat.com>
11557 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
11558 (print_one_catch_solib, print_one_catch_syscall)
11559 (print_one_catch_exec, print_one_exception_catchpoint): Emit
11562 2013-01-16 Yao Qi <yao@codesourcery.com>
11564 * printcmd.c (current_display_number): Make it static.
11566 2013-01-16 Yao Qi <yao@codesourcery.com>
11568 * infcmd.c (step_once): Don't check '!single_inst' as it was
11571 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
11573 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
11575 2013-01-14 Tom Tromey <tromey@redhat.com>
11577 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
11579 * command.h (add_setshow_string_noescape_cmd): Update.
11580 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
11581 (complete_set_gnutarget): New function.
11582 (_initialize_core): Set the "set gnutarget" completer.
11584 2013-01-14 Tom Tromey <tromey@redhat.com>
11587 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
11588 (c_type_print_modifier): Likewise.
11589 * dwarf2read.c (read_tag_restrict_type): New function.
11590 (read_type_die_1): Handle DW_TAG_restrict_type.
11591 * gdbtypes.c (make_restrict_type): New function.
11592 (recursive_dump_type): Handle TYPE_RESTRICT.
11593 * gdbtypes.h (enum type_flag_values): Renumber.
11594 (enum type_instance_flag_value): Add
11595 TYPE_INSTANCE_FLAG_RESTRICT.
11596 (TYPE_RESTRICT): New macro.
11597 (make_restrict_type): Declare.
11599 2013-01-14 Tom Tromey <tromey@redhat.com>
11602 * psymtab.c (struct psymtab_state): New.
11603 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
11605 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
11606 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
11608 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
11609 Pedro Alves <palves@redhat.com>
11613 * remote.c (remote_threads_info): Make a copy of the reply from
11614 qfThreadInfo and use that instead of rs->buf.
11616 2013-01-14 Yao Qi <yao@codesourcery.com>
11618 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
11619 (dbx_psymtab_to_symtab): Likewise.
11620 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
11621 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
11622 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
11624 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
11626 * parse.c (parse_exp_in_context): New variable inner_chain. Call
11627 make_cleanup_restore_current_language. Call set_language. Move
11628 OLD_CHAIN and INNER_CHAIN cleanups.
11629 * utils.c (do_restore_current_language)
11630 (make_cleanup_restore_current_language): New functions.
11631 * utils.h (make_cleanup_restore_current_language): New declaration.
11633 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
11635 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
11636 non-existing files.
11638 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
11639 non-existing files if FILENAME is already absolute.
11641 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11643 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
11644 fputs_filtered. Append trailing newline.
11646 2013-01-11 Yao Qi <yao@codesourcery.com>
11647 Stan Shebs <stan@codesourcery.com>
11649 * psymtab.c (init_psymbol_list): Clarify the comment.
11651 2013-01-11 Yao Qi <yao@codesourcery.com>
11653 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
11654 (update_dprintf_command_list): Assert that 'printf_line' is
11655 non-null. Remove condition check.
11657 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
11660 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
11662 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
11664 * tui/tui-source.h (tui_source_is_displayed): Likewise.
11666 2013-01-09 Anthony Green <green@moxielogic.com>
11668 * cp-abi.c (cplus_print_vtable): Don't return value from void
11670 * ada-lang.c (re_set_catch_assert): Ditto.
11672 2013-01-09 Doug Evans <dje@google.com>
11674 * symfile.h (quick_symbol_functions): Delete member
11675 pre_expand_symtabs_matching. All uses removed.
11676 * dwarf2read.c (dw2_lookup_symbol): Implement.
11677 (dw2_do_expand_symtabs_matching): Delete.
11678 (dw2_pre_expand_symtabs_matching): Delete.
11679 (struct dw2_symtab_iterator): New type.
11680 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
11681 (dw2_expand_symtabs_for_function): Rewrite.
11682 (dwarf2_gdb_index_functions): Update.
11683 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
11684 (psym_functions): Update.
11686 2013-01-09 Tom Tromey <tromey@redhat.com>
11688 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
11689 * configure: Rebuild.
11690 * configure.ac: Add somread.o to the build if BFD has SOM
11692 * somread.c: Include som/aout.h, not syms.h.
11693 (som_symtab_read): Use som_external_symbol_dictionary_record.
11694 Unpack records manually.
11695 (_initialize_somread): Declare.
11697 2012-01-08 Mike Frysinger <vapier@gentoo.org>
11699 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
11700 Cast return_address to 64bits.
11702 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
11704 * printcmd.c: Remove define of function output_command.
11705 * tracepoint.c: Remove extern of function output_command.
11706 * valprint.h: (output_command): New extern.
11708 2013-01-07 Tom Tromey <tromey@redhat.com>
11710 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
11712 (objc_language_defn): Use c_printchar, c_printstr,
11715 2013-01-07 Tom Tromey <tromey@redhat.com>
11719 * ada-valprint.c (printstr, print_field_values): Remove
11721 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
11723 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
11725 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
11726 * main.c (captured_main): Remove "epoch" argument.
11727 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
11728 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
11729 * p-valprint.c (pascal_object_print_value_fields): Remove
11731 * printcmd.c (print_command_1): Remove 'inspect' argument.
11732 (print_command, call_command): Update.
11733 (inspect_command): Remove.
11734 (_initialize_printcmd): Make "inspect" an alias for "print".
11735 * top.c (epoch_interface): Remove.
11736 * top.h (epoch_interface): Remove.
11737 * valprint.c (user_print_options): Update.
11738 (print_converted_chars_to_obstack): Remove "inspect_it" code.
11739 * valprint.h (struct value_print_options) <inspect_it>: Remove
11742 2013-01-04 Tom Tromey <tromey@redhat.com>
11744 * valprint.h (read_string): Add 'extern'.
11746 2013-01-07 Joel Brobecker <brobecker@adacore.com>
11748 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
11749 used to decide whether to define darwin_read_dyld_info or not.
11751 2013-01-03 Pierre Muller <muller@sourceware.org>
11753 * main.c (relocate_gdb_directory): Avoid calling stat function
11756 2013-01-03 Yao Qi <yao@codesourcery.com>
11758 * psymtab.c (fixup_psymbol_section): Update declaration.
11759 (fixup_psymbol_section): Remove code returning value.
11761 2013-01-03 Yao Qi <yao@codesourcery.com>
11763 * symtab.h: Remove some out of date comments.
11764 (enum exception_event_kind): Move it ...
11765 * breakpoint.c: ... here.
11767 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
11770 * darwin-nat.c (darwin_read_dyld_info): Only build if
11771 TASK_DYLD_INFO_COUNT is defined.
11772 (darwin_xfer_partial): Call darwin_read_dyld_info only if
11773 TASK_DYLD_INFO_COUNT is defined.
11775 2013-01-02 Tom Tromey <tromey@redhat.com>
11777 * symfile.h (struct ecoff_debug_hack): Remove.
11778 * objfiles.c: Don't include mdebugread.h.
11780 2013-01-02 Tom Tromey <tromey@redhat.com>
11782 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
11783 * configure.ac: Check for Mach-O support in BFD. Update
11785 * configure: Rebuild.
11787 2013-01-02 Tom Tromey <tromey@redhat.com>
11789 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
11790 * configure.ac: Use GDB_AC_CHECK_BFD.
11791 * configure: Rebuild.
11793 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
11795 * MAINTAINERS: Update my email.
11797 2013-01-01 Joel Brobecker <brobecker@adacore.com>
11799 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
11801 2013-01-01 Joel Brobecker <brobecker@adacore.com>
11803 * rs6000-nat.c (bss_data_overlap): New function.
11804 (vmap_symtab): Use it to adjust the .bss section's offset.
11806 2013-01-01 Joel Brobecker <brobecker@adacore.com>
11808 Update year range in copyright notice of all files.
11810 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
11812 * top.c (print_gdb_version): Update copyright year.
11814 For older changes see ChangeLog-2012.
11820 version-control: never