1 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com>
3 * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
4 (save_gdb_index_command): Switch to .gdb_index version 4.
6 2011-01-25 Pedro Alves <pedro@codesourcery.com>
8 * mi/mi-main.c (get_register): Use get_frame_register_value rather
9 than frame_register, and always pass a valid value to val_print.
11 2011-01-25 Pedro Alves <pedro@codesourcery.com>
13 Centralize printing "<optimized out>".
15 * valprint.h (val_print_optimized_out): Declare.
16 * cp-valprint.c (cp_print_value_fields): Use
17 val_print_optimized_out.
18 * jv-valprint.c (java_print_value_fields): Ditto.
19 * p-valprint.c (pascal_object_print_value_fields): Ditto.
20 * printcmd.c (print_formatted): Ditto.
21 * valprint.c (valprint_check_validity): Ditto.
22 (value_check_printable): Ditto.
23 (val_print_optimized_out): New.
25 2011-01-25 Pedro Alves <pedro@codesourcery.com>
27 * infcmd.c (default_print_registers_info): Allocate values so to
28 never pass a NULL value to val_print.
30 2011-01-25 Pedro Alves <pedro@codesourcery.com>
32 * cp-valprint.c (cp_print_value): Treat the 'skip' local as
33 boolean. Make sure to always pass a value that matches the
34 contents buffer to callees. Preserve `address' for following
36 * value.c (value_contents_for_printing_const): New.
37 (value_address): Constify value argument.
38 * value.h (value_contents_for_printing_const): Declare.
39 (value_address): Constify value argument.
41 2011-01-25 Pedro Alves <pedro@codesourcery.com>
43 * regcache.c (struct regcache_descr): Rename
44 sizeof_raw_register_valid_p field to sizeof_raw_register_status,
45 and sizeof_cooked_register_valid_p to
46 sizeof_cooked_register_status.
47 (init_regcache_descr): Adjust.
48 (struct regcache): Rename register_valid_p field to
50 (regcache_xmalloc_1, regcache_xfree, regcache_save)
51 (do_cooked_read): Adjust.
52 (regcache_valid_p): Rename to ...
53 (regcache_register_status): ... this. Adjust.
54 (regcache_invalidate): Adjust.
55 (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
57 (regcache_raw_supply): Adjust. If buf i NULL, mark the register
58 as unavailable, not valid.
59 (regcache_dump): Adjust.
60 * regcache.h (enum register_status): New.
61 (regcache_register_status): Declare.
62 (regcache_invalidate): Delete declaration.
63 * corelow.c (get_core_registers): Adjust.
64 * tracepoint.c (tfile_fetch_registers): Adjust.
65 * trad-frame.c (REG_VALUE): Rename to ...
66 (TF_REG_VALUE): ... this.
67 (REG_UNKNOWN): Rename to ...
68 (TF_REG_UNKNOWN): ... this.
69 (trad_frame_set_value, trad_frame_set_unknown): Adjust.
70 * mi/mi-main.c (register_changed_p): Adjust.
72 2011-01-25 Pedro Alves <pedro@codesourcery.com>
74 * regcache.c (struct regcache_descr): Remove outdated comment.
75 (init_regcache_descr): Remove sizeof_raw_register_valid_p
77 (regcache_xmalloc): Rename to ...
78 (regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
79 Allocate the regcache type accordingly.
80 (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
81 (regcache_xfree): Asser the source is also readonly. Copy sizeof
82 cooked registers, not raw.
83 (regcache_dup_no_passthrough): Delete.
84 (get_thread_arch_regcache): Use regcache_xmalloc_1.
85 * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
86 mention obsolete write_register_bytes.
87 * regcache.h (regcache_dup_no_passthrough): Delete declaration.
89 2011-01-25 Pedro Alves <pedro@codesourcery.com>
91 Stop remote_read_bytes from handling partial reads itself.
93 * remote-fileio.c: Include target.h.
94 (remote_fileio_write_bytes): Delete.
95 (remote_fileio_func_open, remote_fileio_func_write)
96 (remote_fileio_func_rename, remote_fileio_func_unlink): Use
98 (remote_fileio_func_stat): Use target_read_memory and
100 (remote_fileio_func_gettimeofday): Use target_write_memory.
101 (remote_fileio_func_system): Use target_read_memory.
102 * remote.c (remote_write_bytes): Make it static.
103 (remote_read_bytes): Don't handle partial reads here.
104 * remote.h (remote_read_bytes): Delete declaration.
106 2011-01-25 Pedro Alves <pedro@codesourcery.com>
108 Simplify XML parsing a bit.
110 * xml-support.h (gdb_xml_parse_quick): Declare.
111 * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
112 from gdb_xml_create_parser_and_cleanup, and added `old_chain'
114 (gdb_xml_create_parser_and_cleanup): Reimplement on top of
115 gdb_xml_create_parser_and_cleanup_1.
116 (gdb_xml_parse_quick): New.
117 * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
118 * osdata.c (osdata_parse): Ditto.
119 * remote.c (remote_threads_info): Ditto.
120 * solib-target.c (solib_target_parse_libraries): Ditto.
121 * xml-syscall.c (syscall_parse_xml): Ditto.
122 * xml-tdesc.c (tdesc_parse_xml): Ditto.
124 2011-01-24 Kevin Buettner <kevinb@redhat.com>
126 * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
127 with remote-mips.o added to gdb_target_obs.
128 * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
130 2011-01-24 Pedro Alves <pedro@codesourcery.com>
132 * ada-valprint.c (val_print_packed_array_elements): Pass the
133 correct struct value to val_print.
134 (ada_val_print_1): Ditto.
136 2011-01-24 Pedro Alves <pedro@codesourcery.com>
138 Don't lose embedded_offset in printing routines throughout.
140 * valprint.h (val_print_array_elements): Change prototype.
141 * valprint.c (val_print_array_elements): Add `embedded_offset'
142 parameter, and adjust to pass it down to val_print, while passing
143 `valaddr' or `address' unmodified. Take embedded_offset into
144 account when checking repetitions.
145 * c-valprint.c (c_val_print): Pass embedded_offset to
146 val_print_array_elements instead of adjusting `valaddr' and
148 * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
149 embedded_offset to val_print_array_elements instead of adjusting
151 * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
152 * p-valprint.c (pascal_val_print): Pass embedded_offset to
153 val_print_array_elements and pascal_object_print_value_fields
154 instead of adjusting `valaddr'.
155 (pascal_object_print_value_fields): Add `offset' parameter, and
157 (pascal_object_print_value): Add `offset' parameter, and adjust to
159 (pascal_object_print_static_field): Use
160 value_contents_for_printing/value_embedded_offset, rather than
162 * ada-valprint.c (val_print_packed_array_elements): Add `offset'
163 parameter, and adjust to use it. Use
164 value_contents_for_printing/value_embedded_offset, rather than
166 (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
167 (ada_val_print_array): Add `offset' parameter, and adjust to use
169 (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
170 `embedded_offset' to `offset'. Don't re-adjust `valaddr'.
171 Instead work with offsets. Use
172 value_contents_for_printing/value_embedded_offset, rather than
173 value_contents. Change `defer_val_int' local type to CORE_ADDR,
174 and use value_from_pointer to extract a target pointer, rather
175 than value_from_longest.
176 (print_variant_part): Add `offset' parameter. Replace
177 `outer_valaddr' parameter by a new `outer_offset' parameter.
178 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
179 (ada_value_print): Use
180 value_contents_for_printing/value_embedded_offset, rather than
182 (print_record): Add `offset' parameter, and adjust to pass it
184 (print_field_values): Add `offset' parameter. Replace
185 `outer_valaddr' parameter by a new `outer_offset' parameter.
186 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
187 Use value_contents_for_printing/value_embedded_offset, rather than
189 * d-valprint.c (dynamic_array_type): Use
190 value_contents_for_printing/value_embedded_offset, rather than
192 * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
193 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
194 (java_print_value_fields): Take `offset' into account. Don't
195 re-adjust `valaddr'. Instead pass down adjusted offsets.
196 (java_val_print): Take `embedded_offset' into account. Pass it to
197 java_print_value_fields.
198 * f-valprint.c (f77_print_array_1): Add `embedded_offset'
199 parameter. Don't re-adjust `valaddr' or `address'. Instead pass
200 down adjusted offsets.
201 (f77_print_array): Add `embedded_offset' parameter. Pass it down.
202 (f_val_print): Take `embedded_offset' into account.
204 2011-01-21 Joel Brobecker <brobecker@adacore.com>
206 * inflow.c: Include "gdbcmd.h".
207 (interactive_mode): New static global, moved here from top.c.
208 (show_interactive_mode): New function, moved here from top.c.
209 use gdb_has_a_terminal instead of input_from_terminal_p to
210 determine the current mode.
211 (gdb_has_a_terminal): Add handling of the "iteractive-mode"
213 (_initialize_inflow): Add the "set/show interactive-mode"
214 commands. Moved here from top.c, after having adjusted slightly
216 * top.c (interactive_mode, show_interactive_mode): Delete, moved
218 (input_from_terminal_p): Remove handling of "interactive-mode"
219 setting, moved to infow.c.
220 (init_main): Remove creation of the "set/show interactive-mode"
221 commands, moved to inflow.c.
223 2011-01-19 Joel Brobecker <brobecker@adacore.com>
225 * NEWS: Add entry for native ia64-hpux support.
227 2011-01-19 Tom Tromey <tromey@redhat.com>
230 * thread.c (free_thread): Free 'name'.
231 (print_thread_info): Emit thread name. Change CLI output.
232 (thread_name_command): New function.
233 (do_captured_thread_select): Emit newline.
234 (_initialize_thread): Register 'thread name' command.
235 * target.h (struct target_ops) <to_thread_name>: New field.
236 (target_thread_name): New macro.
237 * target.c (update_current_target): Handle to_thread_name.
238 * python/py-infthread.c (thpy_get_name): New function.
239 (thpy_set_name): Likewise.
240 (thread_object_getset): Add "name".
241 * linux-nat.c (linux_nat_thread_name): New function.
242 (linux_nat_add_target): Set to_thread_name.
243 * gdbthread.h (struct thread_info) <name>: New field.
245 2011-01-18 Joel Brobecker <brobecker@adacore.com>
247 * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
248 (ada_val_print_1): Likewise.
250 2011-01-18 Joel Brobecker <brobecker@adacore.com>
252 * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
253 upper limit address is not greater than the function end address
254 when the upper limit could not be computed using the debugging
257 2011-01-17 Tom Tromey <tromey@redhat.com>
259 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
261 * utils.c: Include gdb_regex.h.
262 (do_regfree_cleanup): New function.
263 (make_regfree_cleanup): Likewise.
264 (get_regcomp_error): Likewise.
265 * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
267 2011-01-17 Tom Tromey <tromey@redhat.com>
269 * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
272 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
274 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
275 for internal variables.
276 (last_was_structop): New static variable.
277 (COMPLETE): New token.
278 (field_exp): New rule to group all '.' suffix handling.
279 Add mark_struct_expression calls when approriate to be able
280 to correctly find fields for completion.
281 (yylex): Adapt to handle field completion and set INTVAR when
284 2011-01-14 Yao Qi <yao@codesourcery.com>
286 * arm-tdep.c (arm_register_reggroup_p): FPS register is in
287 save_reggroup, restore_reggroup and all_reggroup.
289 2011-01-14 Joel Brobecker <brobecker@adacore.com>
291 * ada-valprint. (ada_printchar): Use the correct type length
292 in call to ada_emit_char.
293 * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
295 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
297 * solib-som.h (hpux_major_release): Declare variable here.
298 * solib-som.c: Remove <sys/utsname.h> header.
299 (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
300 (hpux_major_release): Make global, change default value to
301 DEFAULT_HPUX_MAJOR_RELEASE.
302 (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
303 * hppa-hpux-nat.c: Add <sys/utsname.h> include.
304 Add "solib-som.h" header.
305 (set_hpux_major_release): New function.
306 (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
308 2011-01-14 Mike Frysinger <vapier@gentoo.org>
310 * configure.tgt (*-*-uclinux*): Match more Linux os targets
312 2011-01-14 Joel Brobecker <brobecker@adacore.com>
314 * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
315 new-line at end of warning message.
316 (ia64_hpux_store_register): Remove trailing new-line at end of
318 * ia64-hpux-tdep.c: Rephrase comment.
319 * solib-ia64-hpux.c (struct dld_info): Change type of field
320 dld_flags from "long long" to ULONGEST.
322 2011-01-14 Pedro Alves <pedro@codesourcery.com>
324 * target.h (deprecated_child_ops): Delete declaration.
325 * target.c (deprecated_child_ops): Delete definition.
327 2011-01-14 Pedro Alves <pedro@codesourcery.com>
329 * Makefile.in (hpux-thread.o): Delete rule.
330 * configure.ac: Don't check for HPUX DCE threads support.
331 * configure, config.in: Regenerate.
332 * hppa-hpux-nat.c (child_suppress_run): Delete.
333 (hppa_hpux_child_can_run): Delete.
334 (_initialize_hppa_hpux_nat): Don't override to_can_run.
335 * hpux-thread.c: Delete.
337 2011-01-13 Joel Brobecker <brobecker@adacore.com>
339 * hpux-thread.c (hpux_pid_to_str): Delete.
341 2011-01-13 Joel Brobecker <brobecker@adacore.com>
343 * ada-valprint.c (ada_emit_char): Remove strange code.
344 Check that c is <= UCHAR_MAX before passing it to isascii.
345 (char_at): Do not assume that TYPE_LEN is either 1 or 2.
347 2011-01-13 Joel Brobecker <brobecker@adacore.com>
349 * top.c (input_from_terminal_p): Restrict the use of interactive_mode
350 to the case where instream is stdin.
352 2011-01-13 Joel Brobecker <brobecker@adacore.com>
354 * ia64-tdep.h (struct regcache): Forward declare.
355 (struct ia64_infcall_ops): New struct type.
356 (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
358 * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
359 Renames ia64_find_global_pointer.
360 (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
361 (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
362 (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
364 (ia64_infcall_ops): New static global constant.
365 (ia64_gdbarch_init): Set tdep->infcall_ops.
366 * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
367 (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
368 * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
369 (ia64_hpux_dummy_code): New static global constant.
370 (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
371 (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
372 (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
374 (ia64_hpux_infcall_ops): New static global constant.
375 (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
376 for inferior function calls to work properly on ia64-hpux.
378 2011-01-13 Joel Brobecker <brobecker@adacore.com>
380 * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
381 * ia64-tdep.h (struct frame_info): forward declaration.
382 (struct gdbarch_tdep): Add field size_of_register_frame.
383 * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
384 to determine the size of the register frame.
385 (ia64_size_of_register_frame): New function.
386 (ia64_gdbarch_init): Set tdep->size_of_register_frame.
387 * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
388 (IA64_HPUX_UREG_REASON): New macro.
389 (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
391 (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
392 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
393 (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
396 2011-01-13 Joel Brobecker <brobecker@adacore.com>
398 Add support for ia64-hpux.
399 * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
400 ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
402 * configure.host: Add handling for ia64-hpux hosts. Add associated
404 * configure.tgt: Add handling for ia64-hpux targets.
405 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
406 (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
407 (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
409 2011-01-13 Joel Brobecker <brobecker@adacore.com>
411 [ttrace] Compute thread list immediately after attach.
412 * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
414 (inf_ttrace_attach): Use it.
416 2011-01-13 Joel Brobecker <brobecker@adacore.com>
418 * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
419 if we could not determine the frame's function address. Instead,
420 use the frame's PC, and then continue.
422 2011-01-13 Joel Brobecker <brobecker@adacore.com>
424 * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
427 2011-01-13 Joel Brobecker <brobecker@adacore.com>
429 * ia64-tdep.c (ia64_struct_type_p): New function.
430 (ia64_extract_return_value): Handle integral values that are
431 less than 8 bytes long.
432 (ia64_push_dummy_call): Likewise.
434 2011-01-13 Joel Brobecker <brobecker@adacore.com>
436 * ia64-tdep.c (floatformat_ia64_ext_little): Renames
437 floatformat_ia64_ext.
438 (floatformat_ia64_ext_big): New static const.
439 (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
441 2011-01-12 Tom Tromey <tromey@redhat.com>
443 * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
445 * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
446 (mi_cmd_thread_list_ids): Likewise.
447 (mi_cmd_data_list_changed_registers): Likewise.
448 (mi_cmd_data_list_register_values): Likewise.
449 (mi_cmd_data_write_register_values): Likewise.
450 (mi_cmd_data_evaluate_expression): Likewise.
451 (mi_cmd_data_read_memory): Likewise.
452 (mi_cmd_data_read_memory_bytes): Likewise.
453 (mi_cmd_data_write_memory): Likewise.
454 (mi_cmd_enable_timings): Likewise.
455 * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
456 * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
457 (mi_cmd_var_delete): Likewise.
458 (mi_cmd_var_set_format): Likewise.
459 (mi_cmd_var_show_format): Likewise.
460 (mi_cmd_var_info_num_children): Likewise.
461 (mi_cmd_var_list_children): Likewise.
462 (mi_cmd_var_info_type): Likewise.
463 (mi_cmd_var_info_expression): Likewise.
464 (mi_cmd_var_show_attributes): Likewise.
465 (mi_cmd_var_assign): Likewise.
466 (mi_cmd_var_update): Likewise.
467 (mi_cmd_enable_pretty_printing): Likewise.
468 (mi_cmd_var_set_update_range): Likewise.
469 * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
471 (mi_cmd_target_file_put): Likewise.
472 (mi_cmd_target_file_delete): Likewise.
473 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
475 (mi_cmd_stack_info_depth): Likewise.
476 (mi_cmd_stack_list_locals): Likewise.
477 (mi_cmd_stack_list_args): Likewise.
478 (mi_cmd_stack_select_frame): Likewise.
479 (mi_cmd_stack_select_frame): Likewise.
480 (mi_cmd_stack_info_frame): Likewise.
481 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
483 (mi_cmd_file_list_exec_source_files): Likewise.
484 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
485 (mi_cmd_env_cd): Likewise.
486 (mi_cmd_env_path): Likewise.
487 (mi_cmd_env_dir): Likewise.
488 (mi_cmd_inferior_tty_show): Likewise.
489 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
490 * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
491 (mi_cmd_break_watch): Likewise.
493 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
495 * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
496 (ppc_linux_insert_hw_breakpoint): Likewise.
497 (ppc_linux_remove_hw_breakpoint): Likewise.
498 (ppc_linux_insert_watchpoint): Likewise.
500 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
501 Jan Kratochvil <jan.kratochvil@redhat.com>
503 PR fortran/11104 and DWARF unbound arrays detection.
504 * dwarf2read.c (read_subrange_type): Set zero length on unspecified
505 upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
506 unspecified upper bound.
507 * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
508 variables array_size_array, tmp_type and offset_item. New variable
509 array. Remove call to f77_get_upperbound. New variables array_type
510 and index. Call value_subscripted_rvalue for each dimenasion. Remove
511 the final call to deprecated_set_value_type.
513 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
515 Make value allocations more lazy.
516 * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
517 instead of allocate_value and set_value_lazy when possible.
518 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
519 instead of allocate_value and set_value_lazy.
520 * findvar.c (value_of_register_lazy): Likewise.
521 (read_var_value): Remove V preallocation, call just check_typedef in
522 advance. Move allocate_value to LOC_CONST, LOC_LABEL,
523 LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
524 LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
525 set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
526 remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
527 in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
528 the end, remove set_value_lazy there.
529 * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
530 instead of allocate_value and set_value_lazy when possible.
531 * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
532 * value.c (allocate_computed_value): Use allocate_value_lazy instead
533 of allocate_value and set_value_lazy.
534 (value_from_contents_and_address): Use allocate_value_lazy instead of
535 allocate_value and set_value_lazy when possible.
537 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
539 * disasm.c (dump_insns): Support dumping opcodes for MI.
540 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
541 dumping of instruction opcodes.
543 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch)
545 * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
548 2011-01-11 Tom Tromey <tromey@redhat.com>
550 * thread.c (do_captured_thread_select): Emit newline before
553 2011-01-11 Michael Snyder <msnyder@vmware.com>
555 * s390-tdep.c: Comment cleanup, mostly periods and spaces.
556 * score-tdep.c: Ditto.
557 * score-tdep.h: Ditto.
562 * ser-mingw.c: Ditto.
566 * sh64-tdep.c: Ditto.
567 * shnbsd-nat.c: Ditto.
571 * solib-darwin.c: Ditto.
572 * solib-frv.c: Ditto.
574 * solib-irix.c: Ditto.
575 * solib-osf.c: Ditto.
576 * solib-pa64.c: Ditto.
577 * solib-som.c: Ditto.
578 * solib-spu.c: Ditto.
579 * solib-sunos.c: Ditto.
580 * solib-svr4.c: Ditto.
582 * sol-thread.c: Ditto.
586 * sparc64-linux-tdep.c: Ditto.
587 * sparc64-tdep.c: Ditto.
588 * sparc-linux-nat.c: Ditto.
589 * sparc-linux-tdep.c: Ditto.
590 * sparc-sol2-nat.c: Ditto.
591 * sparc-sol2-tdep.c: Ditto.
592 * sparc-tdep.c: Ditto.
593 * sparc-tdep.h: Ditto.
595 * stabsread.c: Ditto.
596 * stabsread.h: Ditto.
604 * target-descriptions.c: Ditto.
605 * target-descriptions.h: Ditto.
607 * target-memory.c: Ditto.
611 * tracepoint.c: Ditto.
612 * tracepoint.h: Ditto.
613 * trad-frame.h: Ditto.
614 * typeprint.c: Ditto.
616 2011-01-11 Michael Snyder <msnyder@vmware.com>
618 * ui-file.c: Comment cleanup, mostly periods and spaces.
623 * v850-tdep.c: Ditto.
636 * windows-nat.c: Ditto.
637 * windows-tdep.c: Ditto.
638 * xcoffread.c: Ditto.
639 * xcoffsolib.c: Ditto.
640 * xml-support.c: Ditto.
641 * xstormy16-tdep.c: Ditto.
642 * xtensa-tdep.c: Ditto.
643 * xtensa-tdep.h: Ditto.
645 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
647 * breakpoint.c (resources_needed_watchpoint): Fix indentation.
648 * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
650 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
651 Thiago Jung Bauermann <bauerman@br.ibm.com>
653 Implement support for PowerPC BookE ranged watchpoints.
655 (struct breakpoint_ops) <resources_needed>: New method.
656 Initialize to NULL in all existing breakpoint_ops instances.
657 (struct breakpoint) <exact>: New field.
658 (target_exact_watchpoints): Declare external global.
659 * breakpoint.c (target_exact_watchpoints): New global flag.
660 (update_watchpoint): Set b->type to bp_hardware_watchpoint and
661 b->enable_state to bp_enabled before calling
662 hw_watchpoint_used_count.
663 (hw_watchpoint_used_count): Iterate over all bp_locations in a
664 watchpoint. Call breakpoint's breakpoint_ops.resources_needed
666 (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
667 if the watchpoint is exact.
668 (resources_needed_watchpoint): New function.
669 (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
670 (watch_command_1): Set b->exact if the user asked for an exact
671 watchpoint and one can be set.
672 (can_use_hardware_watchpoint): Add exact_watchpoints argument.
673 Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
674 the user asks for an exact watchpoint and one can be set. Return
675 number of needed debug registers to watch the expression.
676 * gdbtypes.c (is_scalar_type): New function, based on
677 valprint.c:scalar_type_p.
678 (is_scalar_type_recursive): New function.
679 * gdbtypes.h (is_scalar_type_recursive): Declare.
680 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
681 handle regions when ranged watchpoints are available.
682 (create_watchpoint_request): New function.
683 (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
684 create_watchpoint_request.
685 * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
686 (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
687 `set powerpc' and `show powerpc' commands.
688 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
689 Mention documentation comment in the target macro.
690 (target_region_ok_for_hw_watchpoint): Document return value.
692 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
694 * breakpoint.c (update_watchpoint): Decide on using a software or
695 hardware watchpoint after the bp_locations are created.
697 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
699 Convert hardware watchpoints to use breakpoint_ops.
700 * breakpoint.h (breakpoint_ops) <insert>: Rename to...
701 <insert_location>: ... this. Return int instead of void.
702 Accept pointer to struct bp_location instead of pointer to
703 struct breakpoint. Adapt all implementations.
704 (breakpoint_ops) <remove>: Rename to...
705 <remove_location>: ... this. Accept pointer to struct bp_location
706 instead of pointer to struct breakpoint. Adapt all implementations.
707 * breakpoint.c (insert_catchpoint): Delete function.
708 (insert_bp_location): Call the watchpoint or catchpoint's
709 breakpoint_ops.insert method.
710 (remove_breakpoint_1): Call the watchpoint or catchpoint's
711 breakpoint_ops.remove method.
712 (insert_watchpoint, remove_watchpoint): New functions.
713 (watchpoint_breakpoint_ops): New structure.
714 (watch_command_1): Initialize the OPS field.
715 * inf-child.c (inf_child_insert_fork_catchpoint)
716 (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
717 (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
718 (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
720 (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
721 to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
722 to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
723 to_remove_exec_catchpoint and to_set_syscall_catchpoint.
724 * target.c (update_current_target): Change default implementation of
725 to_insert_fork_catchpoint, to_remove_fork_catchpoint,
726 to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
727 to_insert_exec_catchpoint, to_remove_exec_catchpoint and
728 to_set_syscall_catchpoint to return_one.
729 (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
730 (debug_to_insert_exec_catchpoint): Report return value.
731 * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
732 (to_insert_exec_catchpoint): Change declaration to return int instead
735 2011-01-11 Michael Snyder <msnyder@vmware.com>
737 * arm-tdep.c: Internationalization.
740 * fork-child.c: Ditto.
741 * nto-procfs.c: Ditto.
742 * ppc-sysv-tdep.c: Ditto.
744 * remote-mips.c: Ditto.
746 * rs6000-nat.c: Ditto.
747 * rs6000-tdep.c: Ditto.
751 * xml-support.c: Ditto.
752 * mi/mi-cmd-break.c: Ditto.
753 * mi/mi-cmd-var.c: Ditto.
754 * mi/mi-interp.c: Ditto.
755 * mi/mi-main.c: Ditto.
757 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
759 * remote-sim.c (gdbsim_store_register): Update API to
760 sim_store_register to check more error conditions.
762 2011-01-10 Michael Snyder <msnyder@vmware.com>
764 * nto-procfs.c: Comment cleanup, mostly periods and spaces.
768 * objc-lang.c: Ditto.
772 * opencl-lang.c: Ditto.
775 * parser-defs.h: Ditto.
778 * posix-hdep.c: Ditto.
779 * ppcbug-rom.c: Ditto.
780 * ppc-linux-nat.c: Ditto.
781 * ppc-linux-tdep.c: Ditto.
782 * ppc-linux-tdep.h: Ditto.
783 * ppcnbsd-tdep.c: Ditto.
784 * ppcobsd-tdep.c: Ditto.
785 * ppcobsd-tdep.h: Ditto.
786 * ppc-sysv-tdep.c: Ditto.
790 * proc-flags.c: Ditto.
792 * proc-utils.h: Ditto.
793 * progspace.h: Ditto.
794 * prologue-value.c: Ditto.
795 * prologue-value.h: Ditto.
798 * p-typeprint.c: Ditto.
799 * p-valprint.c: Ditto.
800 * ravenscar-sparc-thread.c: Ditto.
801 * ravenscar-thread.c: Ditto.
802 * ravenscar-thread.h: Ditto.
807 * remote-fileio.c: Ditto.
808 * remote-fileio.h: Ditto.
810 * remote-m32r-sdi.c: Ditto.
811 * remote-mips.c: Ditto.
812 * remote-sim.c: Ditto.
813 * rs6000-aix-tdep.c: Ditto.
814 * rs6000-nat.c: Ditto.
815 * rs6000-tdep.c: Ditto.
817 2011-01-10 Michael Snyder <msnyder@vmware.com>
819 * charset.c (validate): Internationalization.
820 * coffread.c (read_one_sym): Ditto.
821 * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
822 * h8300-tdep.c (H8300_extract_return_value): Ditto.
823 * inflow.c (new_tty): Ditto.
824 * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
825 * m32c-tdep.c (m32c_return_value): Ditto.
826 * mep-tdep.c (mep_store_return_value): Ditto.
827 * score-tdep.c (score7_fetch_insn): Ditto.
828 * ser-mingw.c (pipe_windows_open): Ditto.
829 * sh64-tdep.c (sh64_extract_return_value): Ditto.
830 * spu-tdep.c (spu_register_type): Ditto.
831 * tracepoint.c (trace_find_command): Ditto.
832 * valarith.c (value_pos): Ditto.
834 2011-01-10 Joel Brobecker <brobecker@adacore.com>
836 * ada-valprint.c (printstr): Minor comment reformatting.
838 2011-01-08 Michael Snyder <msnyder@vmware.com>
840 * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
843 2011-01-08 Michael Snyder <msnyder@vmware.com>
845 * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
846 * hppa-hpux-tdep.c: Ditto.
847 * hppa-linux-nat.c: Ditto.
848 * hppa-linux-tdep.c: Ditto.
849 * hppanbsd-tdep.c: Ditto.
850 * hppa-tdep.c: Ditto.
851 * hppa-tdep.h: Ditto.
852 * hpux-thread.c: Ditto.
853 * i386-cygwin-tdep.c: Ditto.
854 * i386-darwin-nat.c: Ditto.
855 * i386gnu-nat.c: Ditto.
856 * i386-linux-nat.c: Ditto.
857 * i386-linux-tdep.c: Ditto.
860 * i386nbsd-tdep.c: Ditto.
861 * i386-sol2-nat.c: Ditto.
862 * i386-stub.c: Ditto.
863 * i386-tdep.c: Ditto.
864 * i386-tdep.h: Ditto.
865 * i387-tdep.c: Ditto.
866 * ia64-linux-nat.c: Ditto.
867 * ia64-linux-tdep.c: Ditto.
868 * ia64-tdep.c: Ditto.
879 * iq2000-tdep.c: Ditto.
880 * irix5-nat.c: Ditto.
886 * jv-typeprint.c: Ditto.
887 * jv-valprint.c: Ditto.
891 * linux-fork.c: Ditto.
892 * linux-nat.c: Ditto.
893 * linux-thread-db.c: Ditto.
894 * lm32-tdep.c: Ditto.
896 2011-01-08 Michael Snyder <msnyder@vmware.com>
898 * m2-exp.y: Comment cleanup, mostly periods and spaces.
900 * m2-typeprint.c: Ditto.
901 * m2-valprint.c: Ditto.
902 * m32c-tdep.c: Ditto.
903 * m32r-linux-nat.c: Ditto.
905 * m32r-tdep.c: Ditto.
906 * m32r-tdep.h: Ditto.
907 * m68hc11-tdep.c: Ditto.
908 * m58klinux-nat.c: Ditto.
909 * m68k-tdep.c: Ditto.
910 * m88k-tdep.c: Ditto.
911 * m88k-tdep.h: Ditto.
912 * machoread.c: Ditto.
918 * mdebugread.c: Ditto.
919 * mdebugread.h: Ditto.
922 * memory-map.h: Ditto.
924 * microblaze-rom.c: Ditto.
925 * microblaze-tdep.c: Ditto.
927 * mips-irix-tdep.c: Ditto.
928 * mips-linux-nat.c: Ditto.
929 * mips-linux-tdep.c: Ditto.
930 * mips-linux-tdep.h: Ditto.
931 * mipsnbsd-nat.c: Ditto.
932 * mipsnbsd-tdep.c: Ditto.
934 * mips-tdep.c: Ditto.
935 * mips-tdep.h: Ditto.
936 * mn10300-linux-tdep.c: Ditto.
937 * mn10300-tdep.c: Ditto.
938 * mn10300-tdep.h: Ditto.
941 * moxie-tdep.c: Ditto.
942 * moxie-tdep.h: Ditto.
945 2011-01-08 Mike Frysinger <vapier@gentoo.org>
947 * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
949 2011-01-08 Robert Millan <rmh@gnu.org>
951 * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
953 2011-01-07 Michael Snyder <msnyder@vmware.com>
955 * charset.c (_initialize_charset): Fix typo in string.
957 2011-01-07 Michael Snyder <msnyder@vmware.com>
959 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
961 * tui/tui-layout.c (tui_set_layout_for_display_command):
962 Split line so that operator goes to beginning of line.
963 * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
964 assignment out of if statement.
966 2011-01-07 Michael Snyder <msnyder@vmware.com>
968 * ada-lang.c: Comment cleanup, mostly periods and spaces.
970 * ada-tasks.c: Ditto.
971 * ada-valprint.c: Ditto.
972 * aix-threads.c: Ditto.
973 * alpha-linux-nat.c: Ditto.
974 * alpha-linux-tdep.c: Ditto.
975 * alpha-mdebug-tdep.c: Ditto.
976 * alpha-nat.c: Ditto.
977 * alpha-osf1-tdep.c: Ditto.
978 * alpha-tdep.c: Ditto.
979 * alphabsd-nat.c: Ditto.
980 * alphabsd-tdep.c: Ditto.
981 * amd64-darwin-tdep.c: Ditto.
982 * amd64-linux-nat.c: Ditto.
983 * amd64-linux-tdep.c: Ditto.
984 * amd64-sol2-tdep.c: Ditto.
985 * amd64-tdep.c: Ditto.
986 * amd64-fbsd-tdep.c: Ditto.
987 * amd64-nbsd-tdep.c: Ditto.
988 * amd64-obsd-tdep.c: Ditto.
989 * amd64-linux-nat.c: Ditto.
990 * amd64-linux-tdep.c: Ditto.
993 * armnbsd-nat.c: Ditto.
995 * bfin-tdep.c: Ditto.
997 * c-typeprintc: Ditto.
998 * c-valprint.c: Ditto.
999 * coff-pe-read.h: Ditto.
1000 * coffreead.c: Ditto.
1001 * cris-tdep.c: Ditto.
1003 * darwin-nat-info.c: Ditto.
1004 * darwin-nat.c: Ditto.
1005 * dbug-rom.c: Ditto.
1009 * dec-thread.c: Ditto.
1011 * demangle.c: Ditto.
1012 * dicos-tdep.c: Ditto.
1013 * dictionary.c: Ditto.
1014 * dictionary.h: Ditto.
1015 * dink32-rom.c: Ditto.
1017 * doublest.c: Ditto.
1019 * dummy-frame.c: Ditto.
1020 * dwarf2-frame.c: Ditto.
1021 * dwarf2expr.c: Ditto.
1022 * dwarf2loc.c: Ditto.
1023 * dwarf2read.c: Ditto.
1027 * event-top.h: Ditto.
1028 * exceptions.c: Ditto.
1029 * exceptions.h: Ditto.
1031 * expprint.c: Ditto.
1032 * expression.h: Ditto.
1036 * f-typeprint.c: Ditto.
1037 * f-valprint.c: Ditto.
1038 * fbsd-nat.c: Ditto.
1040 * fork-child.c: Ditto.
1043 * frv-linux-tdep.c: Ditto.
1044 * frv-tdep.c: Ditto.
1046 * gdb-stabs.h: Ditto.
1047 * gdb_assert.h: Ditto.
1048 * gdb_string.h: Ditto.
1049 * gdb_thread_db.h: Ditto.
1050 * gdb_wait.h: Ditto.
1051 * gdbarch.sh: Ditto.
1053 * gdbthread.h: Ditto.
1054 * gdbtypes.c: Ditto.
1055 * gdbtypes.h: Ditto.
1058 * gnu-v2-abi.c: Ditto.
1059 * gnu-v3-abi.c: Ditto.
1060 * go32-nat.c: Ditto.
1061 * gdbarch.c: Regenerate.
1062 * gdbarch.h: Regenerate.
1064 2011-01-07 Michael Snyder <msnyder@vmware.com>
1066 * ax-gdb.c: Adjust some long output strings.
1067 * breakpoint.c: Ditto.
1072 * linux-nat.c: Ditto.
1073 * solib-pa64.c: Ditto.
1074 * solib-som.c: Ditto.
1076 2011-01-06 Tom Tromey <tromey@redhat.com>
1080 * python/python.c (GdbMethods): Add "newest_frame" method.
1081 * python/python-internal.h (gdbpy_newest_frame): Declare.
1082 * python/py-frame.c (gdbpy_newest_frame): New function.
1084 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1086 * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
1087 * jit.c (jit_debug): New variable.
1088 (show_jit_debug): New function.
1089 (struct target_buffer): Use ULONGEST.
1090 (bfd_open_from_target_memory): Likewise.
1091 (jit_register_code, jit_inferior_init): Add debug output.
1092 (_initialize_jit): Register "debug jit" command.
1094 2011-01-06 Tom Tromey <tromey@redhat.com>
1096 * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
1097 * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
1100 2011-01-06 Tom Tromey <tromey@redhat.com>
1102 * python/py-frame.c (frapy_block): Use get_frame_block.
1104 2011-01-06 Joel Brobecker <brobecker@adacore.com>
1106 Do not stop on SIGPRIO signals by default
1107 * infrun.c (_initialize_infrun): Unset signal_stop and
1108 signal_print for TARGET_SIGNAL_PRIO.
1110 2011-01-06 Joel Brobecker <brobecker@adacore.com>
1112 * ada-tasks.c: Fix style violation in comment.
1114 2011-01-06 Joel Brobecker <brobecker@adacore.com>
1116 * linespec.c (decode_compound, find_method): Remove trailing \n
1117 at end of error string.
1118 * solib-irix.c (irix_current_sos): Likewise.
1119 * varobj.c (uninstall_variable): Likewise.
1121 2011-01-06 Joel Brobecker <brobecker@adacore.com>
1123 * copyright.py: New script.
1124 * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
1125 Launch emacs without exec'ing. Call copyright.py afterwards.
1127 2011-01-05 Michael Snyder <msnyder@vmware.com>
1129 * addrmap.c: Shorten lines of >= 80 columns.
1130 * arch-utils.c: Ditto.
1131 * arch-utils.h: Ditto.
1133 * ax-general.c: Ditto.
1135 * blockframe.c: Ditto.
1136 * breakpoint.c: Ditto.
1137 * buildsym.c: Ditto.
1139 * c-typeprint.c: Ditto.
1141 * coffread.c: Ditto.
1145 * cp-namespace.c: Ditto.
1146 * cp-support.c: Ditto.
1147 * dbug-rom.c: Ditto.
1152 * dictionary.c: Ditto.
1154 * doublest.c: Ditto.
1155 * dwarf2-frame.c: Ditto.
1156 * dwarf2expr.c: Ditto.
1157 * dwarf2loc.c: Ditto.
1158 * dwarf2read.c: Ditto.
1161 * event-loop.c: Ditto.
1162 * event-loop.h: Ditto.
1163 * exceptions.h: Ditto.
1165 * expprint.c: Ditto.
1166 * expression.h: Ditto.
1168 * f-valprint.c: Ditto.
1170 * frame-base.c: Ditto.
1171 * frame-unwind.c: Ditto.
1172 * frame-unwind.h: Ditto.
1176 * gdb-stabs.h: Ditto.
1177 * gdb_assert.h: Ditto.
1178 * gdb_dirent.h: Ditto.
1179 * gdb_obstack.h: Ditto.
1181 * gdbtypes.c: Ditto.
1182 * gdbtypes.h: Ditto.
1183 * inf-ttrace.c: Ditto.
1188 * inline-frame.h: Ditto.
1189 * language.c: Ditto.
1190 * language.h: Ditto.
1191 * libunwind-frame.c: Ditto.
1192 * libunwind-frame.h: Ditto.
1193 * linespec.c: Ditto.
1194 * linux-nat.c: Ditto.
1195 * linux-nat.h: Ditto.
1196 * linux-thread-db.c: Ditto.
1197 * machoread.c: Ditto.
1198 * macroexp.c: Ditto.
1199 * macrotab.c: Ditto.
1202 * mdebugread.c: Ditto.
1207 * objfiles.c: Ditto.
1208 * objfiles.h: Ditto.
1210 * p-typeprint.c: Ditto.
1211 * p-valprint.c: Ditto.
1213 * printcmd.c: Ditto.
1214 * proc-events.c: Ditto.
1216 * progspace.c: Ditto.
1217 * progspace.h: Ditto.
1218 * psympriv.h: Ditto.
1221 * regcache.c: Ditto.
1222 * regcache.h: Ditto.
1223 * remote-fileio.c: Ditto.
1225 * ser-mingw.c: Ditto.
1227 * ser-unix.c: Ditto.
1230 * solib-frv.c: Ditto.
1231 * solib-irix.c: Ditto.
1232 * solib-osf.c: Ditto.
1233 * solib-pa64.c: Ditto.
1234 * solib-som.c: Ditto.
1235 * solib-sunos.c: Ditto.
1236 * solib-svr4.c: Ditto.
1237 * solib-target.c: Ditto.
1241 * stabsread.c: Ditto.
1242 * stabsread.c: Ditto.
1245 * symfile-mem.c: Ditto.
1251 * target-descriptions.c: Ditto.
1252 * target-memory.c: Ditto.
1255 * terminal.h: Ditto.
1258 * tracepoint.c: Ditto.
1259 * tracepoint.h: Ditto.
1263 * user-regs.c: Ditto.
1264 * user-regs.h: Ditto.
1266 * valarith.c: Ditto.
1268 * valprint.c: Ditto.
1269 * valprint.h: Ditto.
1274 * xcoffread.c: Ditto.
1275 * xcoffsolib.c: Ditto.
1276 * xcoffsolib.h: Ditto.
1277 * xml-syscall.c: Ditto.
1278 * xml-tdesc.c: Ditto.
1280 2011-01-05 Michael Snyder <msnyder@vmware.com>
1282 * cli/cli-cmds.c: Shorten lines of >= 80 columns.
1283 * cli/cli-decode.c: Ditto.
1284 * cli/cli-dump.c: Ditto.
1285 * cli/cli-logging.c: Ditto.
1286 * cli/cli-script.c: Ditto.
1287 * cli/cli-setshow.c: Ditto.
1288 * common/signals.c: Ditto.
1289 * mi/mi-cmd-break.c: Ditto.
1290 * mi/mi-cmd-disas.c: Ditto.
1291 * mi/mi-cmd-stack.c: Ditto.
1292 * mi/mi-cmd-var.c: Ditto.
1293 * mi/mi-cmds.c: Ditto.
1294 * mi/mi-common.h: Ditto.
1295 * mi/mi-console.c: Ditto.
1296 * mi/mi-interp.c: Ditto.
1297 * mi/mi-main.c: Ditto.
1298 * osf-share/cma_attr.c: Ditto.
1299 * osf-share/cma_deb_core.h: Ditto.
1300 * osf-share/cma_debug_client.h: Ditto.
1301 * osf-share/cma_handle.h: Ditto.
1302 * osf-share/cma_mutex.h: Ditto.
1303 * osf-share/cma_stack_int.h: Ditto.
1304 * osf-share/cma_tcb_defs.h: Ditto.
1305 * python/py-auto-load.c: Ditto.
1306 * python/py-breakpoint.c: Ditto.
1307 * python/py-cmd.c: Ditto.
1308 * python/py-frame.c: Ditto.
1309 * python/py-objfile.c: Ditto.
1310 * python/py-param.c: Ditto.
1311 * python/py-progspace.c: Ditto.
1312 * python/py-symbol.c: Ditto.
1313 * python/py-value.c: Ditto.
1314 * python/python-internal.h: Ditto.
1315 * python/python.c: Ditto.
1316 * tui/tui-data.c: Ditto.
1317 * tui/tui-disasm.c: Ditto.
1318 * tui/tui-hooks.c: Ditto.
1319 * tui/tui-io.c: Ditto.
1320 * tui/tui-layout.c: Ditto.
1321 * tui/tui-regs.c: Ditto.
1322 * tui/tui-source.c: Ditto.
1323 * tui/tui-stack.c: Ditto.
1324 * tui/tui-win.c: Ditto.
1325 * tui/tui-windata.c: Ditto.
1326 * tui/tui-winsource.c: Ditto.
1328 2011-01-05 Joel Brobecker <brobecker@adacore.com>
1330 * configure.ac, gdb.1: Copyright year update.
1332 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
1334 * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
1335 this_pc_in_block, morestack_msym and morestack_name. Check for
1336 "__morestack" minimal symbol there.
1338 2011-01-03 Joel Brobecker <brobecker@adacore.com>
1340 * symfile.c (find_sym_fns): Add call to dont_repeat.
1342 2011-01-01 Joel Brobecker <brobecker@adacore.com>
1344 Copyright year update in most files (performed by copyright.sh).
1346 2011-01-01 Joel Brobecker <brobecker@adacore.com>
1348 * top.c (print_gdb_version): Update copyright year in version output.
1350 For older changes see ChangeLog-2010.
1356 version-control: never