1 2011-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3 * dwarf2read.c (dwarf2_get_pc_bounds): Require HIGH strictly higher
5 (read_partial_die): Call complaint for inappropriate zero LOWPC or
6 HIGHPC not strictly higher than LOWPC.
8 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
10 Fix formatting of function declarations returning a pointer in
12 * varobj.c (varobj_add_child): Ditto.
13 * hppa-tdep.h (hppa_init_objfile_priv_data): Ditto.
14 * inferior.h (get_displaced_step_closure_by_addr): Ditto.
16 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
18 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
19 for the "generic" vector ABI used with GCC 4.3 and later.
20 (ppc64_sysv_abi_return_value): Likewise.
22 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
24 * infcall.c (call_function_by_hand): Function return value is
25 always a non_lval, even when using struct_return.
27 2011-03-15 Pedro Alves <pedro@codesourcery.com>
29 * printcmd.c (ALL_DISPLAYS_SAFE): New.
30 (map_display_numbers): New.
31 (do_delete_display): New.
32 (undisplay_command): Use map_display_numbers.
33 (do_enable_disable_display): New.
34 (enable_disable_display_command): New function.
35 (enable_display): Delete.
36 (enable_display_command): New.
37 (disable_display_command): Reimplement.
38 (_initialize_printcmd): Adjust "enable display" command to use
39 `enable_display_command' as callback.
41 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
43 * NEWS: Add Python breakpoint 'stop' operation.
45 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
47 * NEWS: Delete duplicate entry. Fix typo.
49 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
51 Fix ARI warning about function names in first column.
52 Put prototype declaration on same line as return type.
55 * python/py-stopevent.h: Ditto.
56 For long function names, split parameters to
57 allow function name on same line as return type.
58 * solib-pa64.c: Ditto.
61 For long function declaration, use single line.
65 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
67 * python/python.h: Declare gdbpy_should_stop and
68 gdbpy_breakpoint_has_py_cond.
69 * python/python.c: Add python.h to includes. Remove python.h from
70 HAVE_PYTHON definition
71 (gdbpy_should_stop): New dummy function.
72 (gdbpy_breakpoint_has_py_cond): New dummy function.
73 * python/py-breakpoint.c (bppy_init): Rewrite to allow
74 sub-classing capabilities.
75 (gdbpy_should_stop): New function.
76 (gdbpy_breakpoint_has_py_cond): New function.
77 (local_setattro): New function.
78 * breakpoint.c (condition_command): Add check for Python 'stop'
80 (bpstat_check_breakpoint_conditions): Execute Python 'stop'
81 operation function as part of stop/continue tests.
83 2011-03-14 Tom Tromey <tromey@redhat.com>
86 * dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'.
87 (needs_frame_dwarf_call): Likewise.
89 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
91 Fix ARI warning about functions without parameters that do not
93 * breakpoint.c (all_tracepoints): Replace () by (void).
94 * f-exp.y (match_string_literal): Ditto.
96 * m2-exp.y (yylex): Ditto.
97 * mep-tdep.c (current_me_module): Ditto.
98 (current_options): Ditto.
99 (current_cop_data_bus_width): Ditto.
100 (current_cr_names): Ditto.
101 (current_cr_is_float): Ditto.
102 (current_ccr_names): Ditto.
103 * objc-exp.y (yylex): Ditto.
104 * p-exp.y (yylex): Ditto.
105 * remote.c (send_interrupt_sequence): Ditto.
106 * tracepoint.c (current_trace_status): Ditto.
107 * python/py-evts.c (gdbpy_initialize_py_events): Ditto.
108 * python/py-prettyprint.c (push_dummy_python_frame): Ditto.
110 2011-03-11 Michael Snyder <msnyder@vmware.com>
112 * cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define.
113 * cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS.
114 (lookup_cmd): Test for CMD_LIST_AMBIGUOUS.
115 * completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS.
116 * top.c (set_verbose): Use CMD_LIST_AMBIGUOUS.
118 * event-loop-c (delete_async_signal_handler): Assert prev_ptr.
119 (delete_async_event_handler): Ditto.
121 * python/py-breakpoint.c (bppy_set_condition): Stop memory leak.
123 * python/py-breakpoint.c (bppy_get_commands): Fix memory leak.
125 * top.c (set_verbose): Assert showcmd was found.
127 2011-03-11 Maxim Grigoriev <maxim2405@gmail.com>
129 * xtensa-tdep.c (warning_once): Correct style issues.
131 2011-03-11 Yao Qi <yao@codesourcery.com>
133 * arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements.
135 2011-03-11 Andreas Schwab <schwab@redhat.com>
137 * common/aclocal.m4: Remove.
139 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
141 * xtensa-tdep.c (windowing_enabled): Remove inline attribute.
142 (xtensa_write_register, xtensa_read_register): Likewise.
143 (xtensa_hextochar): Removed.
144 (xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code.
146 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
148 * xtensa-tdep.c (xtensa_c0reg_t): Update comments.
149 (xtensa_call0_frame_cache_t): Update comments. New fields added.
150 (xtensa_alloc_frame_cache): Add initialization for new fields.
151 (xtensa_frame_cache): Change the way how call0_frame_cache () is called.
152 (warning_once): New function.
153 (xtensa_insn_kind): New item c0opc_and.
154 (call0_classify_opcode): Add the case for AND instruction.
155 (call0_track_op): Change arguments. New local variable litbase.
156 Add the case to handle c0opc_and. Update algorithms for c0opc_mov,
157 c0opc_l32r, c0opc_s32i to take into account dynamic stack adjustments
159 Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu.
160 (call0_analyze_prologue): Update the comments. Change arguments.
161 Add the variety of updates to handle extended prologues, which now can
162 conduct dynamic stack adjustments.
163 (call0_frame_cache): Likewise.
164 (xtensa_skip_prologue): Update call0_analyze_prologue () function call.
165 (xtensa_gdbarch_init): Initialize xtensa_session_once_reported.
167 2011-03-10 Michael Snyder <msnyder@vmware.com>
169 * tracepoint.c (cmd_qtv): Discard unused value 'packet'.
170 (cmd_qtframe): Ditto.
171 (cmd_qtbuffer): Ditto.
172 (cmd_bigqtbuffer): Ditto.
174 2011-03-10 Tom Tromey <tromey@redhat.com>
176 * tracepoint.c (trace_actions_command): Update.
177 * thread.c (thread_apply_command): Update.
178 * reverse.c (delete_bookmark_command): Update.
179 (bookmarks_info): Update.
180 * printcmd.c (undisplay_command): Update.
181 * memattr.c (mem_enable_command): Update.
182 (mem_disable_command): Update.
183 (mem_delete_command): Update.
184 * inferior.c (detach_inferior_command): Update.
185 (kill_inferior_command): Update.
186 (remove_inferior_command): Update.
187 * cli/cli-utils.h (struct get_number_or_range_state): New.
188 (init_number_or_range): Declare.
189 (get_number_or_range): Update.
190 * cli/cli-utils.c (init_number_or_range): New function.
191 (get_number_or_range): Change 'pp' parameter to 'state'. Remove
193 (number_is_in_list): Update.
194 * breakpoint.h (get_tracepoint_by_number): Update.
195 * breakpoint.c (map_breakpoint_numbers): Update for change to
197 (find_location_by_number): Use get_number, not
199 (trace_pass_set_count): New function.
200 (trace_pass_command): Update for change to get_number_or_range.
202 (get_tracepoint_by_number): Remove 'multi_p' parameter; add
205 2011-03-10 Phil Muldoon <pmuldoon@redhat.com>
207 * python/py-param.c (add_setshow_generic): Add set/show callback
208 parameters. Register Python object context.
209 (get_show_value): New function.
210 (get_set_value): New function.
211 (call_doc_function): New function.
212 (get_doc_string): Move behind get_show_value/get_set_value.
214 2011-03-10 Andreas Tobler <andreast-list@fgznet.ch>
216 * fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'.
218 2011-03-09 Maxim Grigoriev <maxim2405@gmail.com>
220 * xtensa-tdep.c (xtensa_read_register): Add comment.
221 (xtensa_write_register): Likewise.
222 (xtensa_hextochar): Add comment and update to match coding conventions.
223 (xtensa_frame_cache, xtensa_return_value): Follow coding conventions.
224 (execute_l32e, execute_s32e, execute_code): Update comments.
225 (xtensa_exception_handler_t): Update to match coding conventions.
226 (xtensa_insn_kind): Likewise.
228 2011-03-09 Michael Snyder <msnyder@vmware.com>
230 * mi-cmd-disas.c (mi_cmd_disassemble): Fix memory leak.
232 2011-03-09 Pedro Alves <pedro@codesourcery.com>
234 * nto-tdep.c (nto_find_and_open_solib): Constify local `base'.
236 2011-03-09 Tom Tromey <tromey@redhat.com>
238 * thread.c (restore_selected_frame): Handle frame_level == -1.
239 (make_cleanup_restore_current_thread): Use
240 get_selected_frame_if_set.
241 * frame.h (get_selected_frame_if_set): Declare.
242 * frame.c (get_selected_frame_if_set): New function.
244 2011-03-09 Pedro Alves <pedro@codesourcery.com>
246 * cli/cli-cmds.c (shell_escape): Use lbasename.
247 * coffread.c (coff_start_symtab): Constify parameter.
248 (complete_symtab): Constify `name' parameter.
249 (coff_symtab_read): Constify `filestring' local.
250 (coff_getfilename): Constify return and `result' local.
252 * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename.
253 * linux-fork.c (info_checkpoints_command): Use lbasename.
254 * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename.
255 * minsyms.c (lookup_minimal_symbol): Use lbasename.
256 * nto-tdep.c (nto_find_and_open_solib): Use lbasename.
257 * procfs.c (procfs_make_note_section): Use lbasename.
258 * tui/tui-io.c (printable_part): Constity return and parameter.
260 (print_filename): Constify parameters, and local `s'.
261 (tui_rl_display_match_list): Constify local `temp'.
263 2011-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
266 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
267 Fix DWARF-3+ DW_AT_accessibility default assumption.
268 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
269 cu->header.version >= 3.
271 2011-03-09 Yao Qi <yao@codesourcery.com>
273 * common/Makefile.in: Remove.
274 * common/configure: Remove.
275 * common/configure.ac: Remove.
277 2011-03-09 Yao Qi <yao@codesourcery.com>
280 2011-02-11 Yao Qi <yao@codesourcery.com>
282 * common/Makefile.in: Add copyright header.
284 2011-02-11 Yao Qi <yao@codesourcery.com>
286 * Makefile.in: Remove signals.o from COMMON_OBS. Link
288 * configure.ac: Add common to sub dir.
289 * configure: Regenerate.
291 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
293 * xtensa-tdep.c (call0_ret): New function.
294 (xtensa_skip_prologue): Speed up analysis.
296 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
298 * xtensa-tdep.c (xtensa_register_reggroup_p): Count in all registers
299 while executing MI command -data-list-changed-registers.
301 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
303 * xtensa-tdep.c (xtensa_read_register): New function.
304 (xtensa_write_register): New function.
305 (xtensa_find_register_by_name): New function.
306 (xtensa_windowed_frame_cache): Update comments in type description.
307 (xtensa_frame_cache): Likewise.
308 (xtensa_window_interrupt_insn): New function.
309 (xtensa_frame_cache): Add analysis for Xtensa Window Exception frames.
310 (xtensa_insn_kind): Add new instructions.
311 (rwx_special_register): New function.
312 (call0_classify_opcode): Add new instructions to the analysis.
313 (a0_saved, a7_saved, a11_saved): New variables.
314 (a0_was_saved, a7_was_saved, a11_was_saved): New variables.
315 (execute_l32e): New function.
316 (execute_s32e): New function.
317 (xtensa_exception_handler_t): New type.
318 (execute_code): New function.
319 (xtensa_window_interrupt_frame_cache): New function to conduct frame
320 analysis for Xtensa Window Exception handlers.
322 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
324 * xtensa-tdep.c (TX_PS): New.
325 (windowing_enabled): Update to count for Call0 ABI.
326 (xtensa_hextochar): New.
327 (xtensa_init_reggroups): Make algorithm generic.
328 (xtensa_frame_cache): Use TX_PS on Tiny Xtensa.
330 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
332 * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): Update.
334 2011-03-08 Michael Snyder <msnyder@vmware.com>
336 * i386-tdep.c (i386_follow_jump): Check return value of
338 (i386_analyze_struct_return): Ditto.
339 (i386_skip_probe): Ditto.
340 (i386_match_insn): Ditto.
341 (i386_skip_noop): Ditto.
342 (i386_analyze_frame_setup): Ditto.
343 (i386_analyze_register_saves): Ditto.
344 (i386_skip_prologue): Ditto.
345 (i386_skip_main_prologue): Ditto.
347 * target.c (read_whatever_is_readable): Fix memory leak.
349 * i386-tdep.c (i386_process_record): Document fall through.
351 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
353 Fix DWARF-3+ DW_AT_accessibility default assumption.
354 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
355 cu->header.version >= 3.
357 2011-03-08 Pedro Alves <pedro@codesourcery.com>
359 * remote.c (remote_check_symbols): Skip if the target has no
362 2011-03-08 Joel Brobecker <brobecker@adacore.com>
364 * target.c (read_whatever_is_readable): Reformat comment,
365 with a minor typo fix. Minor reformatting of the code.
367 2011-03-08 Yao Qi <yao@codesourcery.com>
369 * arm-tdep.c: Remove prototype declaration displaced_in_arm_mode.
370 (displaced_read_reg): Add `dsc' parameter, remove `from' parameter.
371 Use cached result instead of calling displaced_in_arm_mode again.
372 (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter.
373 (displaced_write_reg, copy_preload, copy_preload_reg): Callers update.
374 (cleanup_copro_load_store, copy_copro_load_store): Likewise.
375 (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise.
376 (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise.
377 (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise.
378 (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise.
379 (cleanup_block_load_all, cleanup_block_store_pc): Likewise.
380 (cleanup_block_load_pc, copy_block_xfer): Likewise.
381 * arm-linux-tdep.c (arm_linux_copy_svc): Callers update.
382 (arm_catch_kernel_helper_return): Likewise.
383 * gdb/arm-tdep.h : Update function declarations.
385 2011-03-07 Michael Snyder <msnyder@vmware.com>
387 * dwarf2loc.c (indirect_pieced_value): Assert 'piece' not null.
389 * ser-unix.c (hardwire_get_tty_state): Stop memory leak.
391 * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Free environment.
393 * elfread.c (elf_symtab_read): Stop memory leak.
395 * main.c (captured_main): Fix memory leak.
397 2011-03-07 Andreas Schwab <schwab@linux-m68k.org>
399 * ada-lang.c (compare_names): Call is_name_suffix with string1
402 2011-03-07 Tom Tromey <tromey@redhat.com>
404 * xcoffread.c (xcoff_sym_fns): Update.
405 * symfile.h (struct sym_fns) <sym_read_psymbols>: New field.
406 (enum symfile_add_flags) <SYMFILE_NO_READ>: New constant.
407 * symfile.c (syms_from_objfile): Handle SYMFILE_NO_READ.
408 (symbol_file_add_with_addrs_or_offsets): Likewise.
409 (reread_symbols): Handle OBJF_PSYMTABS_READ.
410 * somread.c (som_sym_fns): Update.
411 * psymtab.h (require_partial_symbols): Declare.
412 * psymtab.c (require_partial_symbols): New function.
413 (ALL_OBJFILE_PSYMTABS_REQUIRED): New macro.
414 (ALL_OBJFILE_PSYMTABS): Undef.
415 (ALL_PSYMTABS): Move from psympriv.h.
416 (lookup_partial_symtab, find_pc_sect_psymtab)
417 (lookup_symbol_aux_psymtabs, relocate_psymtabs)
418 (find_last_source_symtab_from_partial)
419 (forget_cached_source_info_partial)
420 (print_psymtab_stats_for_objfile, read_symtabs_for_function)
421 (expand_partial_symbol_tables, read_psymtabs_with_filename)
422 (map_symbol_names_psymtab, map_symbol_filenames_psymtab)
423 (find_symbol_file_from_partial, map_matching_symbols_psymtab)
424 (expand_symtabs_matching_via_partial, maintenance_info_psymtabs):
425 Use ALL_OBJFILE_PSYMTABS_REQUIRED.
426 * psympriv.h (ALL_PSYMTABS): Move to psymtab.c.
427 * objfiles.h (OBJF_PSYMTABS_READ): New macro.
428 * objfiles.c (objfile_has_partial_symbols): Handle lazily-read
430 * mipsread.c (ecoff_sym_fns): Update.
431 * machoread.c (macho_sym_fns): Update.
432 * elfread.c (elf_symfile_read): Set up for lazy psymtab reading.
433 (read_psyms): New function.
434 (elf_sym_fns, elf_sym_fns_gdb_index): Update.
435 (elf_sym_fns_lazy_psyms): New global.
436 * dwarf2read.c (dwarf2_initialize_objfile): Don't call
437 dwarf2_build_psymtabs.
438 * dbxread.c (aout_sym_fns): Update.
439 * coffread.c (coff_sym_fns): Update.
441 2011-03-07 Tom Tromey <tromey@redhat.com>
443 * infrun.c (print_exited_reason): Include inferior id and pid in
446 2011-03-07 Tom Tromey <tromey@redhat.com>
448 * target.h (struct target_ops) <to_has_execution>: Add ptid_t
450 (target_has_execution_1): Update.
451 (target_has_execution_current): Declare.
452 (target_has_execution): Call target_has_execution_current.
453 (default_child_has_execution): Update.
454 * target.c (default_child_has_execution): Add 'the_ptid'
456 (target_has_execution_1): Likewise.
457 (target_has_execution_current): New function.
458 (add_target): Update.
459 (init_dummy_target): Update.
460 * remote-m32r-sdi.c (m32r_has_execution): New function.
461 (init_m32r_ops): Use it.
462 * record.c (record_core_has_execution): Now static. Add
463 'the_ptid' parameter.
464 * inferior.c (have_live_inferiors): Don't save current thread.
465 Use target_has_execution_1.
467 2011-03-07 Yao Qi <yao@codesourcery.com>
469 * Makefile.in (aclocal_m4_deps): Remove gnulib/m4/memcmp.m4.
471 2011-03-07 Joel Brobecker <brobecker@adacore.com>
473 * elfread.c (elf_symtab_read): Minor reformatting.
475 2011-03-07 Joel Brobecker <brobecker@adacore.com>
477 * objc-lang.c (selectors_info): Minor reformatting.
479 2011-03-07 Joel Brobecker <brobecker@adacore.com>
481 * ada-lang.c (compare_names): Add FALLTHROUGH comment.
483 2011-03-07 Joel Brobecker <brobecker@adacore.com>
484 Michael Snyder <msnyder@vmware.com>
486 * ada-valprint.c (ada_val_print_array): Move the declaration of
487 "byte_order" and "elttype" inside the block where these variables
488 are actually used. Remove some special handling for the case
489 where "elttype" and "eltlen" are null. Replace by a comment
490 and a couple of assertion checks.
492 2011-03-05 Michael Snyder <msnyder@vmware.com>
494 * source.c (add_path): Replace semicolon at end of block.
495 * dwarf2expr.c (execute_stack_op): Ditto.
497 2011-03-05 Mike Frysinger <vapier@gentoo.org>
499 * bfin-tdep.c: Include sim-regno.h and gdb/sim-bfin.h.
500 * configure.tgt (bfin-*-*linux*): Define gdb_sim.
501 (bfin-*-*): Likewise.
503 2011-03-05 Michael Snyder <msnyder@vmware.com>
505 * dwarf2expr.c (execute_stack_op): Delete superfluous semicolon.
506 * mdebugread.c (parse_symbol): Ditto.
507 * parse.c (parse_exp_in_context): Ditto.
508 * source.c (add_path): Ditto.
509 * utils.c (gnu_debuglink_crc32): Ditto.
510 * varobj.c (variable_language): Ditto.
512 * linux-tdep.c (linux_get_siginfo_type): Stop memory leak.
514 2011-03-04 Michael Snyder <msnyder@vmware.com>
516 * linux-fork.c (inferior_call_waitptid): Fix copy/paste error.
518 * symfile.c (simple_overlay_update): Check for null return value
519 from lookup_minimal_symbol.
521 * xml-syscall.c (syscall_start_syscall): Assert name is non null.
523 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
525 * eval.c (parse_and_eval_address_1): Remove function.
526 * linespec.c (decode_indirect): Call parse_to_comma_and_eval
527 instead of parse_and_eval_address_1.
528 * value.h (parse_and_eval_address_1): Remove prototype.
530 2011-03-04 Michael Snyder <msnyder@vmware.com>
532 * remote.c (putpkt_binary): Document that case stmt falls through.
534 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
536 * breakpointc (print_it_typical): Move NULL check from here...
537 (print_bp_stop_message): ... to here.
539 2011-03-04 Michael Snyder <msnyder@msnyder-server.eng.vmware.com>
541 * breakpoint.c (enable_command): Use break instead of continue,
542 and fill in a missing break.
543 (disable_command): Ditto.
545 2011-03-04 Ulrich Weigand <ulrich.weigand@linaro.org>
547 * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate.
548 (terminal_save_ours): Remove misleading comment.
549 (inflow_inferior_data_cleanup): Free ttystate.
550 (inflow_inferior_exit): Likewise.
551 (copy_terminal_info): Copy ttystate.
553 * serial.c (serial_copy_tty_state): New function.
554 * serial.h (serial_copy_tty_state): Add prototype.
555 (struct serial_ops): Add copy_tty_state callback.
556 * ser-base.c (ser_base_copy_tty_state): New function.
557 * ser-base.h (ser_base_copy_tty_state): Add prototype.
558 * ser-go32.c (dos_copy_tty_state): New function.
559 (dos_ops): Install copy_tty_state callback.
560 * ser-mingw.c (_initialize_ser_windows): Likewise.
561 * ser-pipe.c (_initialize_ser_pipe): Likewise.
562 * ser-unix.c (hardwire_copy_tty_state): New function.
563 (_initialize_ser_hardwire): Install it.
565 2011-03-04 Michael Snyder <msnyder@vmware.com>
567 * breakpoint.c (create_breakpoint): Add missing break statement.
569 Reverting this patch:
570 * infcall.c (call_function_by_hand): Add break statements for lint.
572 Reverting this patch:
573 * cli/cli-script.c (script_from_file): Add break for lint.
575 2011-03-04 Michael Snyder <msnyder@vmware.com>
577 * solib.c (reload_shared_libraries_1): Close memory leak.
579 2011-03-03 Tom Tromey <tromey@redhat.com>
582 * dwarf2read.c (process_psymtab_comp_unit): Handle case where
585 2011-03-03 Michael Snyder <msnyder@vmware.com>
587 * remote-fileio.c (remote_fileio_func_fstat): Initialize all
588 fields of struct 'st' to zero.
590 * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize
591 sal.pspace before calling set_current_source_symtab_and_line.
593 2011-03-03 Yao Qi <yao@codesourcery.com>
595 * Makefile.in (configure-common): Remove. Let Makefile
596 in dir common to rebuild itself.
597 (common/Makefile): Likewise.
599 2011-03-03 Joel Brobecker <brobecker@adacore.com>
601 * utils.c (parse_escape): Add i18n markup in error message.
603 2011-03-03 Yao Qi <yao@codesourcery.com>
605 * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with
607 (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise.
608 (displaced_write_reg, displaced_read_reg): Likewise.
609 (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise.
610 (cleanup_block_load_pc, copy_block_xfer): Likewise.
611 (cleanup_branch): Replace magic number 14 and 15 with
612 ARM_LR_REGNUM and ARM_PC_REGNUM respectively.
614 2011-03-02 Michael Snyder <msnyder@vmware.com>
616 * maint.c (maintenance_do_deprecate): No need to check for NULL.
618 * cli/cli-script.c (script_from_file): Add break for lint.
620 * mdebugread.c (parse_partial_symbols): Fix indent.
622 * target-descriptions.c (tdesc_gdb_type): No need to call
623 xstrdup, callee saves a copy.
625 * printcmd.c (print_scalar_formatted): Use strncpy for safety.
627 * infcall.c (call_function_by_hand): Add break statements for lint.
629 * utils.c (parse_escape): Escape the escape char.
631 * python/py-inferior.c (build_inferior_list): Error out if
633 (gdbpy_inferiors): Error out if build_inferior_list fails.
635 * linux-nat.c (linux_nat_xfer_partial): Preserve errno around
638 * record.c (record_restore): Move printf to before error return.
640 2011-03-02 Yao Qi <yao@codesourcery.com>
642 * arm-tdep.h (struct displaced_step_closure): Add two new fields
643 is_thumb and insn_size.
644 * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset
645 on both ARM and Thumb mode.
646 (arm_process_displaced_insn): Set is_thumb and insn_size.
647 (arm_displaced_init_closure): Handle both 16-bit and 32-bit.
648 (arm_displaced_step_fixup): Likewise.
650 2011-03-01 Michael Snyder <msnyder@vmware.com>
652 * cli/cli-dump.c (dump_bfd_file): Check error return and warn.
654 * jv-lang.c (evaluate_subexp_java): Conditional can't be true.
656 * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here.
658 * cli/cli-dump.c (restore_binary_file): Validate ftell return value.
660 * ada-lang.c (ada_make_symbol_completion_list): Replace malloc
663 * ada-lang.c (aggregate_assign_others): Rename inner scope variable
664 which shadows function parameter.
666 * tracepoint.c (create_tsv_from_upload): Superfluous call
667 to xstrdup. Callee already calls xstrdup.
669 * linespec.c (decode_line_1): Remove unnecessary null check.
671 * tracepoint.c (scope_info): Fix mem leak, remove underused
674 * python/py-prettyprint.c (apply_val_pretty_printer): Remove
675 superfluous null check.
677 * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null.
678 (value_of_builtin_frame_fp_reg): Ditto.
680 * event-top.c (display_gdb_prompt): Remove superfluous null check.
682 * python/py-prettyprint.c (apply_val_pretty_printer): VAL may
685 * linespec.c (decode_line_1): Check for null before dereference.
687 * reverse.c (record_restore): Move null-check to before pointer
690 * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable.
692 * objc-lang.c (selectors_info): Add explanitory comment.
693 (classes_info): Ditto.
695 2011-03-01 Ulrich Weigand <ulrich.weigand@linaro.org>
697 * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define.
698 (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel
699 versions of the trampoline. Handle Thumb vs. ARM addresses.
700 (arm_kernel_linux_restart_syscall_tramp_frame): New global.
701 (arm_linux_init_abi): Install it.
702 * arm-tdep.c (arm_psr_thumb_bit): Make global.
703 * arm-tdep.c (arm_psr_thumb_bit): Add prototype.
705 2011-02-28 Michael Snyder <msnyder@vmware.com>
707 * ui-out.c (ui_out_field_core_addr): Make local char buffer
708 a little bigger, to avoid possibility of an overflow.
710 * breakpoint.c (breakpoint_adjustment_warning): Make local char
711 buffers a little bigger, to avoid possibility of an overflow.
713 * coffread.c (coff_getfilename): Add check to avoid overflow.
715 * objc-lang.c (selectors_info): Add a small safety margin to
717 (classes_info): Error out on too long REGEXP.
719 * infrun.c (handle_inferior_event): Remove unused function call.
721 * fork-child.c (fork_inferior): Remove ifdef'd code and
724 * linux-thread-db.c (attach_thread): Discard unused value.
726 * linux-nat.c (linux_handle_extended_wait): Delete unused variable.
728 * remote.c (remote_get_noisy_reply): Discard unused value.
729 (remote_vcont_resume): Ditto.
730 (remote_stop_ns): Ditto.
732 * linespec.c (decode_objc): Delete unused variable.
734 * tui/tui-regs.c (tui_register_format): Delete unused variable.
736 * dwarf2read.c (add_partial_symbol): Discard unused values.
737 (read_base_type): Delete unused variable.
739 * dbxread.c (read_dbx_symtab): Discard unused value.
741 * eval.c (evaluate_subexp_standard): Delete unused variable,
742 and discard unused values.
744 * infcmd.c (_initialize_infcmd): Discard unused values.
746 * stabsread.c (rs6000_builtin_type): Missing break statement.
748 * dbxread.c (process_one_symbol): Discard unused value.
750 * coffread.c (coff_end_symtab): Delete unused variable.
752 * dwarf2read.c (dw2_get_file_names): Discard unused value.
753 (dwarf2_add_typedef): Delete unused variable.
754 (read_namespace): Ditto.
755 (dwarf_decode_macros): Ditto.
757 * m2-lang.c (evaluate_subexp_modula2): Discard unused variable.
759 * opencl-lang.c (evaluate_subexp_opencl): Discard unused value.
761 * p-valprint.c (pascal_val_print): Discard unused value.
763 * utils.c (nquery): Call va_end before return;
767 * proc-service.c (ps_plog): Call va_end before return.
769 2011-02-28 Tom Tromey <tromey@redhat.com>
771 * python/python.c (gdbpy_value_cst): New global.
772 (_initialize_python): Initialize it.
773 * python/python-internal.h (gdbpy_value_cst): Declare.
774 * python/py-value.c (convert_value_from_python): Use
777 2011-02-28 Michael Snyder <msnyder@vmware.com>
779 * python/py-cmd.c (cmdpy_init): Fix memory leak.
781 * breakpoint.c (catch_syscall_completer): Free malloced list.
783 * jv-lang.c (java_primitive_type_from_name): Add missing break.
785 * opencl-lang.c (lval_func_check_validity): Rename inner variables.
786 (lval_func_check_synthetic_pointer): Ditto.
787 (lval_func_free_closure): Fix use-after-free.
789 2011-02-28 Tom Tromey <tromey@redhat.com>
791 * psymtab.c (expand_partial_symbol_tables): Use
792 ALL_OBJFILE_PSYMTABS.
794 2011-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
796 * objc-lang.c (selectors_info): Error on too long REGEXP.
798 2011-02-28 Michael Snyder <msnyder@vmware.com>
800 * python/py-param.c (set_parameter_value): Add missing
803 * linux-record.c (record_linux_system_call): Add missing
806 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
808 * breakpoint.c (print_one_breakpoint_location): Remove unused
809 argument PRINT_ADDRESS_BITS. Update callers.
810 (print_one_breakpoint): Likewise.
812 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
814 * breakpoint.c (wrap_indent_at_field): New function.
815 (print_breakpoint_location): Use it instead of WRAP_INDENT argument.
816 Allocate ui_stream locally instead of using STB argument.
817 (print_one_breakpoint_location): Update call.
818 * ui-out.c (ui_out_query_field): New function.
819 * ui-out.h (ui_out_query_field): Add prototype.
821 2011-02-28 Joel Brobecker <brobecker@adacore.com>
823 From Michael Snyder <msnyder@vmware.com>
824 * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment.
826 2011-02-27 Michael Snyder <msnyder@vmware.com>
828 * objc-lang.c (selectors_info): Prevent string overrun.
830 * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one
833 * symtab.c (rbreak_command): Move variable 'file_name' to
836 * d-valprint.c (dynamic_array_type): Avoid shadowing a function
837 param with a local variable of the same name.
839 2011-02-27 Michael Snyder <msnyder@vmware.com>
841 * value.c (value_from_history_ref): New function.
842 * value.h (value_from_history_ref): Export.
843 * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
844 to parse value history references.
845 * cli/cli-utils.h (get_number_trailer): Update comment.
847 2011-02-27 Michael Snyder <msnyder@vmware.com>
849 * inferior.c (detach_inferior_command): Use get_number_or_range.
850 (kill_inferior_command): Ditto.
851 (remove_inferior_command): Ditto.
852 (initialize_inferiors): Make command names plural.
855 2011-02-27 Michael Snyder <msnyder@vmware.com>
857 * darwin-nat-info.c: Fix comment typo.
858 * dwarf2expr.h: Ditto.
861 * frame-unwind.h: Ditto.
863 * hppa-hpux-tdep.c: Ditto.
864 * i386-linux-nat.c: Ditto.
865 * linux-nat.c: Ditto.
868 * ppc-linux-tdep.c: Ditto.
871 * tui/tui-winsource.c: Ditto.
873 2011-02-26 Michael Snyder <msnyder@vmware.com>
875 * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file).
877 * maint.c (maintenance_do_deprecate): Plug a memory leak.
879 * dwarf2loc.c (insert_bits): Avoid shadowing a function param
880 with a local variable of the same name.
882 * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function
883 param with a local variable of the same name.
884 (i387_supply_xsave): Ditto.
886 * linux-low.c (linux_nat_xfer_osdata): Rename local variable so
887 that it does not shadow a function parameter.
889 * i386-nat.c (i386_length_and_rw_bits): Document that case
890 statement is meant to fall through.
892 * expprint.c (dump_subexp_body_standard): Document that case
893 statement is meant to fall through.
895 * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete
896 dead if statement. Condition can't be false.
898 2011-02-25 Michael Snyder <msnyder@vmware.com>
900 * arm-tdep.c: Fix typos in comments.
901 * bsd-uthread.c: Ditto.
902 * completer.c: Ditto.
904 * cp-namespace.c: Ditto.
905 * cp-support.c: Ditto.
906 * cris-tdep.c: Ditto.
908 * dwarf2read.c: Ditto.
912 * mdebugread.c: Ditto.
913 * mips-tdep.c: Ditto.
914 * ppc-linux-nat.c: Ditto.
915 * ppc-linux-tdep.c: Ditto.
917 * sol-thread.c: Ditto.
918 * solib-frv.c: Ditto.
920 * sparc64-tdep.c: Ditto.
922 * stabsread.c: Ditto.
927 * python/py-block.c: Ditto.
928 * python/py-symbol.c: Ditto.
929 * python/py-symtab.c: Ditto.
930 * python/py-value.c: Ditto.
931 * tui/tui-win.c: Ditto.
933 2011-02-25 Michael Snyder <msnyder@vmware.com>
935 * inferior.c (print_inferior): Accept a string instead of an int
936 for requested_inferiors, and use get_number_or_range to parse it.
937 (info_inferiors_command): Pass args string to print_inferior.
938 (initialize_inferiors): Change help string for info inferiors.
939 * inferior.h (print_inferior): Export prototype change.
941 2011-02-25 Tom Tromey <tromey@redhat.com>
943 * common/ax.def (invalid2): Set to 0x31.
945 2011-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
947 * dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use
949 (disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset,
951 (disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest.
953 2011-02-24 Michael Snyder <msnyder@vmware.com>
955 * Makefile.in (clean): Make clean should remove generated files
956 observer.h and observer.inc.
958 2011-02-24 Joel Brobecker <brobecker@adacore.com>
960 Revert the following patch (not approved yet):
961 2011-02-21 Hui Zhu <teawater@gmail.com>
962 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
963 * ax-gdb.c (gen_printf_expr_callback): New function.
964 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
965 * ax-general.c (ax_memcpy): New function.
966 (ax_print): Handle "printf".
968 * ax.h (ax_memcpy): Forward declare.
969 * common/ax.def (invalid2): Removed.
971 * printcmd.c (printcmd.h): New include.
972 (string_printf): New function.
973 (ui_printf): Removed.
974 (printf_command): Remove static. Call string_printf.
975 (eval_command): Call string_printf.
976 * printcmd.h: New file.
977 * tracepoint.c (validate_actionline,
978 encode_actions_1): handle printf_command.
980 2011-02-23 Tom Tromey <tromey@redhat.com>
982 * ax-general.c (ax_pick): Add missing newline.
984 2011-02-23 Michael Snyder <msnyder@vmware.com>
986 * breakpoint.c (breakpoint_1): Change first argument from an int
987 to a char pointer, so that the function now accepts a list of
988 breakpoints rather than just one. Use new function
989 'number_is_in_list' to implement.
990 (breakpoints_info): Pass char * instead of int to breakpoint_1.
991 (watchpoints_info): Ditto.
992 (tracepoints_info): Ditto.
993 (maintenance_info_breakpoints): Ditto.
994 (_initialize_breakpoint): Update help strings to reflect the fact
995 that these functions can now take more than one argument.
996 * cli/cli-utils.c (number_is_in_list): New function.
997 * cli/cli-utils.h (number_is_in_list): Export.
999 2011-02-23 Michael Snyder <msnyder@vmware.com>
1001 * memattr.c (mem_enable_command): Use get_number_or_range.
1002 (mem_disable_command): Ditto.
1003 (mem_delete_command): Ditto.
1004 (_initialize_mem): Tweak usage message to reflect multiple
1007 2011-02-22 Doug Evans <dje@google.com>
1009 Add gdb.lookup_global_symbol python function.
1011 * python/py-symbol.c (gdbpy_lookup_global_symbol): New function.
1012 * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it.
1013 * python/python.c (GdbMethods): Add entry for lookup_global_symbol.
1015 2011-02-22 Tom Tromey <tromey@redhat.com>
1017 * language.c (language_class_name_from_physname): Rename
1018 'curr_language' argument to 'lang'; use in body.
1020 2011-02-22 Michael Snyder <msnyder@vmware.com>
1022 * cli/cli-utils.c (number_is_in_list): Check for zero return.
1024 2011-02-22 Pedro Alves <pedro@codesourcery.com>
1026 * frame-unwind.h: Fix comment to mention the this frame, not the
1029 2011-02-22 Tom Tromey <tromey@redhat.com>
1031 * symfile.c (auto_solib_limit): Remove.
1032 * symfile.h (auto_solib_limit): Remove.
1034 2011-02-22 Joel Brobecker <brobecker@adacore.com>
1036 * Makefile.in (INSTALLED_LIBS): Delete. Update comment.
1038 2011-02-21 Michael Snyder <msnyder@vmware.com>
1040 * gdbthread.h (print_thread_info): Change prototype.
1041 * thread.c (print_thread_info): Accept char* instead of int for
1042 requested_threads argument. Use new function number_is_in_list
1043 to determine which threads to list.
1044 (info_threads_command): Pass char* to print_thread_info.
1045 * cli/cli-utils.c (number_is_in_list): New function.
1046 * cli/cli-utils.h (number_is_in_list): Export.
1047 * mi/mi-main.c (mi_cmd_thread_info): Pass char* to
1049 (print_one_inferior): Ditto.
1050 (mi_cmd_list_thread_groups): Ditto.
1052 2011-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1054 * common/Makefile.in (CFLAGS): New.
1055 (COMPILE): Add $(CFLAGS).
1057 2011-02-21 Tom Tromey <tromey@redhat.com>
1059 * breakpoint.c (catch_syscall_command_1): Fix typo.
1061 2011-02-21 Tom Tromey <tromey@redhat.com>
1063 * reverse.c: Include cli-utils.h.
1064 * printcmd.c: Include cli-utils.h.
1065 (string_printf): Use skip_spaces.
1066 * cli/cli-utils.h: New file.
1067 * cli/cli-utils.c: New file.
1068 * cli/cli-dump.h (skip_spaces): Move to cli-utils.h.
1069 * cli/cli-dump.c (skip_spaces): Move to cli-utils.c.
1070 * breakpoint.h (get_number, get_number_or_range): Move to
1072 * breakpoint.c: Include cli-utils.h.
1073 (get_number_trailer, get_number, get_number_or_range)
1074 (ep_skip_leading_whitespace): Move to cli-utils.c.
1075 (create_breakpoint_sal, find_condition_and_thread)
1076 (decode_static_tracepoint_spec, watch_command_1)
1077 (watch_maybe_just_location, ep_parse_optional_if_clause)
1078 (catch_fork_command_1, catch_exec_command_1)
1079 (catch_syscall_command_1): Use skip_spaces, skip_to_space.
1080 * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o.
1081 (SUBDIR_CLI_SRCS): Add cli-utils.c.
1082 (HFILES_NO_SRCDIR): Add cli-utils.h.
1083 (cli-utils.o): New target.
1085 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1087 * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID
1088 before calling discard_all_inferiors.
1090 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
1092 * opencl-lang.c (STRUCT_OCL_TYPE): Remove.
1093 (struct builtin_opencl_type): Remove.
1094 (builtin_opencl_type): Change return type to "struct type **".
1095 (lookup_opencl_vector_type): Update caller.
1096 (opencl_language_arch_info): Copy primitive type vector from gdbarch.
1097 (build_opencl_types): Install plain array of "struct type *"
1098 instead of "struct builtin_opencl_type".
1100 2011-02-21 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1101 Ulrich Weigand <uweigand@de.ibm.com>
1103 * arm-linux-nat.c: Include "observer.h" and "gdbthread.h".
1104 (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define.
1105 (struct arm_linux_hwbp_cap): New type.
1106 (arm_linux_get_hwbp_cap): New function.
1107 (arm_linux_get_hw_breakpoint_count): Likewise.
1108 (arm_linux_get_hw_watchpoint_count): Likewise.
1109 (arm_linux_can_use_hw_breakpoint): Likewise.
1110 (arm_hwbp_type): New type.
1111 (arm_hwbp_control_t): Likewise.
1112 (struct arm_linux_hw_breakpoint): Likewise.
1113 (struct arm_linux_thread_points): Likewise.
1114 (arm_threads): New global variable.
1115 (arm_linux_find_breakpoints_by_tid): New function.
1116 (arm_hwbp_control_initialize): Likewise.
1117 (arm_hwbp_control_is_enabled): Likewise.
1118 (arm_hwbp_control_disable): Likewise.
1119 (arm_linux_hw_breakpoint_initialize): Likewise.
1120 (arm_linux_get_hwbp_type): Likewise.
1121 (arm_linux_hw_watchpoint_initialize): Likewise.
1122 (arm_linux_hw_breakpoint_equal): Likewise.
1123 (arm_linux_insert_hw_breakpoint1): Likewise.
1124 (arm_linux_remove_hw_breakpoint1): Likewise.
1125 (arm_linux_insert_hw_breakpoint): Likewise.
1126 (arm_linux_remove_hw_breakpoint): Likewise.
1127 (arm_linux_region_ok_for_hw_watchpoint): Likewise.
1128 (arm_linux_insert_watchpoint): Likewise.
1129 (arm_linux_remove_watchpoint): Likewise.
1130 (arm_linux_stopped_data_address): Likewise.
1131 (arm_linux_stopped_by_watchpoint): Likewise.
1132 (arm_linux_watchpoint_addr_within_range): Likewise.
1133 (arm_linux_new_thread): Likewise.
1134 (arm_linux_thread_exit): Likewise.
1135 (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint
1136 related target callbacks. Register arm_linux_new_thread and
1137 arm_linux_thread_exit.
1138 * arm-tdep.h (arm_pc_is_thumb): Add prototype.
1139 * arm-tdep.c (arm_pc_is_thumb): Make global.
1140 (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint.
1142 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
1144 * breakpoint.c (update_watchpoint): Do not attempt to recreate
1145 per-frame locations while within a function epilogue.
1147 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
1149 * ser-mingw.c (ser_windows_close): Reformat comment to better conform
1150 to GNU coding standards.
1152 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
1154 Allow use of mingw native on Windows 95 OS.
1155 * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry.
1156 (ser_windows_close): Only call CancelIo if function exists.
1157 (_initialize_ser_windows): Use LoadLirary/GetProcAddress
1158 to check for existence of CancelIo function in kernel32 DLL.
1160 2011-02-21 Hui Zhu <teawater@gmail.com>
1162 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
1163 * ax-gdb.c (gen_printf_expr_callback): New function.
1164 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
1165 * ax-general.c (ax_memcpy): New function.
1166 (ax_print): Handle "printf".
1168 * ax.h (ax_memcpy): Forward declare.
1169 * common/ax.def (invalid2): Removed.
1170 (printf): New entry.
1171 * printcmd.c (printcmd.h): New include.
1172 (string_printf): New function.
1173 (ui_printf): Removed.
1174 (printf_command): Remove static. Call string_printf.
1175 (eval_command): Call string_printf.
1176 * printcmd.h: New file.
1177 * tracepoint.c (validate_actionline,
1178 encode_actions_1): handle printf_command.
1180 2011-02-19 Michael Snyder <msnyder@vmware.com>
1182 * reverse.c (delete_one_bookmark): Argument is now bookmark
1183 id rather than pointer to bookmark struct.
1184 (delete_bookmark_command): Use get_number_or_range.
1185 (goto_bookmark_command): Parse with get_number instead of strtoul.
1186 (bookmark_1): New function. Print info for one bookmark.
1187 (bookmarks_info): Use get_number_or_range and bookmark_1.
1189 2011-02-18 Michael Snyder <msnyder@vmware.com>
1191 * thread.c (info_threads_command): Re-implement using
1192 get_number_or_range.
1193 (thread_apply_command): Ditto.
1195 2011-02-18 Tom Tromey <tromey@redhat.com>
1197 * common/ax.def: New file.
1198 * ax.h (enum agent_op): Use ax.def.
1199 * ax-general.c (aop_map): Use ax.def.
1201 2011-02-18 Tom Tromey <tromey@redhat.com>
1203 * ax-general.c (aop_map): Add pick and rot.
1204 * dwarf2loc.c (compile_dwarf_to_ax) <DW_OP_over>: Reimplement.
1205 <DW_OP_rot>: Implement.
1206 * ax.h (enum agent_op) <aop_pick, aop_rot>: New constants.
1208 * ax-general.c (ax_pick): New function.
1210 2011-02-18 Tom Tromey <tromey@redhat.com>
1212 * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc.
1214 2011-02-18 Jan Kratochvil <jan.kratochvil@redhat.com>
1215 Tom Tromey <tromey@redhat.com>
1217 * cp-support.c (make_symbol_overload_list_namespace): Do not call
1218 make_symbol_overload_list_block with NULL BLOCK.
1219 * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF.
1221 2011-02-18 Pedro Alves <pedro@codesourcery.com>
1223 * breakpoint.c (get_number_trailer): No longer accept a NULL PP.
1224 * breakpoint.h (get_number_or_range): Declare.
1225 * printcmd.c (ALL_DISPLAYS): Declare.
1226 (delete_display): Reimplement taking a display pointer.
1227 (undisplay_command): Accept a range of displays to delete, using
1228 get_number_or_range.
1230 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1232 * c-valprint.c (c_val_print): Add embedded_offset to address
1233 for arrays of unspecified length.
1234 * p-valprint.c (pascal_val_print): Likewise.
1236 2011-02-18 Yao Qi <yao@codesourcery.com>
1238 * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ...
1239 (arm_process_displaced_insn): .. here. Remove parameter INSN.
1240 (thumb_process_displaced_insn): New.
1241 * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update
1242 call to arm_process_displaced_insn.
1243 * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn.
1245 2011-02-17 Tom Tromey <tromey@redhat.com>
1247 * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare.
1248 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from
1249 compile_dwarf_to_ax. No longer static. Call
1250 dwarf2_compile_cfa_to_ax.
1251 (locexpr_tracepoint_var_ref): Update.
1252 (loclist_tracepoint_var_ref): Update.
1253 * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare.
1254 * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame'
1255 argument; add 'gdbarch' and 'pc'.
1256 (dwarf2_compile_cfa_to_ax): New function.
1257 (dwarf2_frame_cache): Update.
1259 2011-02-17 Joel Brobecker <brobecker@adacore.com>
1261 * ada-lang.c (ada_type_of_array): Fix the size of the array
1262 in the case of an unconstrained packed array.
1264 2011-02-17 Yao Qi <yao@codesourcery.com>
1266 * common/Makefile.in: Add more targets for make.
1268 2011-02-16 Tom Tromey <tromey@redhat.com>
1270 * dwarf2loc.c (unimplemented): Fix typo.
1272 2011-02-16 Tom Tromey <tromey@redhat.com>
1274 * dwarf2loc.c (unimplemented): Handle unnamed opcodes.
1275 (compile_dwarf_to_ax) <default>: Use unimplemented.
1276 <DW_OP_deref>: Update.
1277 (disassemble_dwarf_expression): Update.
1278 * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument.
1279 (decode_locdesc): Update.
1280 * dwarf2expr.h (dwarf_stack_op_name): Update.
1282 2011-02-16 Tom Tromey <tromey@redhat.com>
1284 * ax.h (struct aop_map) <name>: Now const.
1286 2011-02-16 Tom Tromey <tromey@redhat.com>
1288 * ax-gdb.c.c (gen_expr) <UNOP_MEMVAL>: Handle value kinds other
1291 2011-02-16 Yao Qi <yao@codesourcery.com>
1293 * infrun.c (get_displaced_step_closure_by_addr): New.
1294 * inferior.h: Declare it.
1295 * arm-tdep.c: (arm_pc_is_thumb): Call
1296 get_displaced_step_closure_by_addr. Adjust MEMADDR if it
1299 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1300 Jan Kratochvil <jan.kratochvil@redhat.com>
1303 * tracepoint.c (memrange_sortmerge): Fix list A's end calculation.
1305 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1306 Jan Kratochvil <jan.kratochvil@redhat.com>
1308 * value.c (value_contents_copy_raw): Extend describing comment.
1309 Assert that the destination contents we're overwriting are wholly
1311 (value_contents_copy): Extend describing comment.
1313 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1314 Jan Kratochvil <jan.kratochvil@redhat.com>
1316 * value.c (value_available_contents_eq): Remove redundant local
1317 variables. Fix available contents comparision.
1318 * value.h (value_available_contents_eq): Extend describing
1321 2011-02-16 Yao Qi <yao@codesourcery.com>
1323 * thread.c (info_threads_command): Add missing i18n markup and remove
1326 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1328 * breakpoint.c (longjmp_names): New variable.
1329 (struct breakpoint_objfile_data): New type.
1330 (breakpoint_objfile_key): New variable.
1331 (msym_not_found): New variable.
1332 (msym_not_found_p): New predicate.
1333 (get_breakpoint_objfile_data): New function.
1334 (create_overlay_event_breakpoint): Check per-objfile cache for
1336 (create_longjmp_master_breakpoint): Likewise.
1337 (create_std_terminate_master_breakpoint): Likewise.
1338 (create_exception_master_breakpoint): Likewise.
1339 (_initialize_breakpoint): Register per-objfile data key.
1341 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1343 * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate
1345 (create_longjmp_master_breakpoint): Loop over longjmp names.
1346 (create_std_terminate_master_breakpoint): Const-propagate parameter
1348 (update_breakpoints_after_exec): Adjust.
1349 (breakpoint_re_set): Adjust.
1351 2011-02-15 Michael Snyder <msnyder@vmware.com>
1353 * thread.c (info_threads_command): Process arg as thread id,
1354 or list of thread ids.
1355 (thread_find_command): New command.
1356 (_initialize_thread): Document argument for info threads.
1357 Document 'thread find' command.
1358 * NEWS: Document new command "thread find".
1360 2011-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1362 * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'.
1363 * aclocal.m4: Regenerated with aclocal-1.11.1.
1364 * common/configure: Regenerate with autoconf-2.64.
1366 2011-02-15 Ken Werner <ken.werner@de.ibm.com>
1368 * opencl-lang.c (build_opencl_types): Set the size of the built-in
1369 bool data type to a size of one byte.
1371 2011-02-15 Pedro Alves <pedro@codesourcery.com>
1372 Jan Kratochvil <jan.kratochvil@redhat.com>
1374 * target.c (memory_xfer_live_readonly_partial): Document where to
1375 look for interface description.
1377 2011-02-15 Yao Qi <yao@codesourcery.com>
1380 * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in
1381 order to store PC value on stack instead of text section.
1383 2011-02-15 Thiago Jung Bauermann <bauerman@br.ibm.com>
1385 * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
1386 the EFP register set size.
1387 (efpr_pseudo_register_read): Use regcache_raw_read_part to read
1388 data from the VMX register.
1389 (efpr_pseudo_register_write): Use regcache_raw_write_part to read
1390 and write data from/to the VMX register.
1392 2011-02-14 Michael Snyder <msnyder@vmware.com>
1394 * command.h (enum command_class): New class 'no_set_class', for
1395 "show" commands without a corresponding "set" command.
1396 * value.c (_initialize_values): Use 'no_set_class' for "show values".
1397 * copying.c (_initialize_copying): Ditto for "show copying" and
1399 * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
1401 * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
1402 which there is no corresponding "set" command (eg. "show copying").
1404 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1405 Jan Kratochvil <jan.kratochvil@redhat.com>
1407 * exec.c (section_table_available_memory): Change `len' parameter
1409 * exec.h (section_table_available_memory): Ditto.
1410 * value.h (read_value_memory): Rename the `offset' parameter to
1413 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1414 Jan Kratochvil <jan.kratochvil@redhat.com>
1416 * memrange.c (compare_mem_ranges): Mention sort order in
1418 (normalize_mem_ranges): Add comment. Fix ra->length calculation.
1419 * tracepoint.c (traceframe_available_memory): Extend comment to
1420 mention what happens to RESULT when the target does not support
1423 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1424 Jan Kratochvil <jan.kratochvil@redhat.com>
1426 * value.c (mark_value_bytes_unavailable): Fix indexing the `bef'
1429 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1431 * value.c (value_bits_valid, value_bits_synthetic_pointer):
1432 No longer handle NULL values.
1434 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1436 * exceptions.h (NOT_AVAILABLE_ERROR): New error.
1437 * value.c: Include "exceptions.h".
1438 (require_available): Throw NOT_AVAILABLE_ERROR instead of a
1440 * cp-abi.c: Include gdb_assert.h.
1441 (baseclass_offset): Add `embedded_offset' and `val' parameters.
1442 Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR
1444 * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val'
1445 parameters. No longer returns -1 on error.
1446 (struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and
1448 * cp-valprint.c: Include exceptions.h.
1449 (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching
1450 the baseclass_offset. Handle unavailable base classes. Use
1451 val_print_invalid_address.
1452 * p-valprint.c: Include exceptions.h.
1453 (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors
1454 when fetching the baseclass_offset. No longer expect
1455 baseclass_offset returning -1. Handle unavailable base classes.
1456 Use val_print_invalid_address.
1457 * valops.c (dynamic_cast_check_1): Rename `contents' parameter to
1458 `valaddr' parameter, and change its type to gdb_byte pointer. Add
1459 `embedded_offset' and `val' parameters. Adjust.
1460 (dynamic_cast_check_2): Rename `contents' parameter to `valaddr'
1461 parameter, and change its type to gdb_byte pointer. Add
1462 `embedded_offset' and `val' parameters. Adjust. No longer expect
1463 baseclass_offset returning -1.
1464 (value_dynamic_cast): Use value_contents_for_printing rather than
1465 value_contents. Adjust.
1466 (search_struct_field): No longer expect baseclass_offset returning
1468 (search_struct_method): If reading memory from the target is
1469 necessary, wrap it in a new value to pass to baseclass_offset. No
1470 longer expect baseclass_offset returning -1.
1471 (find_method_list): No longer expect baseclass_offset returning
1472 -1. Use value_contents_for_printing rather than value_contents.
1473 * valprint.c (val_print_invalid_address): New function.
1474 * valprint.h (val_print_invalid_address): Declare.
1475 * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset'
1476 and `val' parameters. No longer expect baseclass_offset returning
1478 * gnu-v2-abi.c: Include "exceptions.h".
1479 (gnuv2_baseclass_offset): Add `embedded_offset' and `val'
1480 parameters. Handle unavailable memory. Recurse through
1481 gnuv2_baseclass_offset directly, rather than through
1482 baseclass_offset. No longer returns -1 on not found, instead
1484 * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and
1485 `val' parameters. Adjust.
1487 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1489 * tracepoint.c (memrange_sortmerge): Don't merge ranges that are
1490 almost but not quite adjacent.
1492 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1494 * value.h (value_entirely_available): Declare.
1495 * value.c (value_entirely_available): New function.
1496 * c-valprint.c (c_value_print): Don't try fetching the pointer's
1497 real type if the pointer is unavailable.
1499 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1501 * valops.c (value_repeat): Use read_value_memory instead of
1504 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1506 * value.h (value_contents_copy, value_contents_copy_raw): Declare.
1507 * value.c (value_contents_copy_raw, value_contents_copy): New
1509 (value_primitive_field): Use value_contents_copy_raw instead of
1511 * valops.c (value_fetch_lazy): Use value_contents_copy instead of
1513 (value_array, value_slice): Ditto.
1514 * valarith.c (value_subscripted_rvalue): Use
1515 value_contents_copy_raw instead of memcpy.
1517 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1519 <unavailable> references.
1521 * valops.c (get_value_at): Use value_from_contents_and_address,
1522 avoiding read_memory.
1524 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1526 * c-valprint.c (c_val_print): Print a string with unavailable
1527 contents as an array.
1529 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1531 * value.h (unpack_bits_as_long): Delete declaration.
1532 (unpack_value_bits_as_long): Declare.
1533 (unpack_value_field_as_long): Declare.
1534 (value_field_bitfield): Declare.
1535 * value.c (unpack_bits_as_long): Rename to...
1536 (unpack_value_bits_as_long_1): ... this. Add embedded_offset and
1537 value parameters. Return the extracted result in a new output
1538 parameter. If the value contents are unavailable, return false,
1539 otherwise return true.
1540 (unpack_value_bits_as_long): New.
1541 (unpack_field_as_long): Rename to...
1542 (unpack_value_field_as_long_1): ... this. Add embedded_offset and
1543 Add embedded_offset and value parameters. Return the extracted
1544 result in a new output parameter. If the value contents are
1545 unavailable, return false, otherwise return true.
1546 (unpack_value_field_as_long): New.
1547 (unpack_field_as_long_1): New.
1548 (unpack_field_as_long): Reimplement as wrapper around
1549 unpack_value_field_as_long_1.
1550 (value_field_bitfield): New function.
1551 * valops.c (value_fetch_lazy): When fetching a bitfield, use
1552 unpack_value_bits_as_long. Mark the value as unavailable, if it
1554 * jv-valprint.c (java_print_value_fields): Use
1555 value_field_bitfield.
1556 * p-valprint.c (pascal_object_print_value_fields): Use
1557 value_field_bitfield.
1558 * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield.
1560 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1562 * value.c (get_internalvar_integer): Also return the int value of
1563 TYPE_CODE_INT INTERNALVAR_VALUE values.
1564 (set_internalvar): Don't special case TYPE_CODE_INT.
1566 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1568 * value.c (struct internalvar) <enum internalvar_kind>: Remove
1569 INTERNALVAR_POINTER.
1571 (value_of_internalvar): Remove INTERNALVAR_POINTER handling.
1572 (set_internalvar): Remove special TYPE_CODE_PTR handling.
1573 (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling.
1575 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1577 * value.h (value_available_contents_eq): Declare.
1578 * value.c (find_first_range_overlap): New function.
1579 (value_available_contents_eq): New function.
1580 * valprint.c (val_print_array_elements): Use
1581 value_available_contents_eq.
1582 * ada-valprint.c (val_print_packed_array_elements): Use
1583 value_available_contents_eq.
1584 * jv-valprint.c (java_value_print): Use
1585 value_available_contents_eq.
1587 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1589 * target.c (target_read_live_memory): New function.
1590 (memory_xfer_live_readonly_partial): New.
1591 (memory_xfer_partial): If reading from a traceframe, fallback to
1592 reading unavailable read-only memory from read-only regions of
1594 * tracepoint.c (disconnect_tracing): Adjust.
1595 (set_current_traceframe): New, factored out from
1596 set_traceframe_number.
1597 (set_traceframe_number): Reimplement to only change the traceframe
1598 number on the GDB side.
1599 (do_restore_current_traceframe_cleanup): Adjust.
1600 (make_cleanup_restore_traceframe_number): New.
1601 (cur_traceframe_number): New global.
1602 (tfile_open): Set cur_traceframe_number to no traceframe.
1603 (set_tfile_traceframe): New function.
1604 (tfile_trace_find): If looking up a traceframe using any method
1605 other than by number, make sure the current tfile traceframe
1606 matches gdb's current traceframe. Update the current tfile
1607 traceframe if the lookup succeeded.
1608 (tfile_fetch_registers, tfile_xfer_partial)
1609 (tfile_get_trace_state_variable_value): Make sure the remote
1610 traceframe matches gdb's current traceframe.
1611 * remote.c (remote_traceframe_number): New global.
1612 (remote_open_1): Set it to -1.
1613 (set_remote_traceframe): New function.
1614 (remote_fetch_registers, remote_store_registers)
1615 (remote_xfer_memory, remote_xfer_partial)
1616 (remote_get_trace_state_variable_value): Make sure the remote
1617 traceframe matches gdb's current traceframe.
1618 (remote_trace_find): If looking up a traceframe using any method
1619 other than by number, make sure the current remote traceframe
1620 matches gdb's current traceframe. Update the current remote
1621 traceframe if the lookup succeeded.
1622 * infrun.c (fetch_inferior_event): Adjust.
1623 * tracepoint.h (set_current_traceframe): Declare.
1624 (get_traceframe_number, set_traceframe_number): Add describing
1627 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1629 Mark pieces of values as unavailable if the corresponding memory
1632 * valops.c: Include tracepoint.h.
1633 (value_fetch_lazy): Use read_value_memory.
1634 (read_value_memory): New.
1635 * value.h (read_value_memory): Declare.
1636 * dwarf2loc.c (read_pieced_value): Use read_value_memory.
1637 * exec.c (section_table_available_memory): New function.
1638 * exec.h (section_table_available_memory): Declare.
1640 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1642 * Makefile.in (SFILES): Add memrange.c.
1643 (HFILES_NO_SRCDIR): Add memrange.h.
1644 (COMMON_OBS): Add memrange.o.
1645 * memrange.c: New file.
1646 * memrange.h: New file.
1647 * tracepoint.c: Include memrange.h.
1648 (struct mem_range): Delete.
1649 (mem_range_s): Delete.
1650 (traceframe_available_memory): New function.
1651 * tracepoint.h (traceframe_available_memory): Declare.
1653 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1655 * target.h (struct traceframe_info): Forward declare.
1656 (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
1657 (struct target_ops) <to_traceframe_info>: New field.
1658 (target_traceframe_info): New.
1659 * target.c (update_current_target): Inherit and default
1661 * remote.c (PACKET_qXfer_traceframe_info): New.
1662 (remote_protocol_features): Register qXfer:traceframe-info:read.
1663 (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
1664 (remote_traceframe_info): New.
1665 (init_remote_ops): Install it.
1666 (_initialize_remote): Install "set/show remote traceframe-info"
1668 * tracepoint.h (parse_traceframe_info): Declare.
1669 * tracepoint.c (struct mem_range): New.
1670 (mem_range_s): New typedef.
1671 (struct traceframe_info): New.
1672 (traceframe_info): New global.
1673 (free_traceframe_info): New function.
1674 (clear_traceframe_info): New function.
1675 (start_tracing, tfind_1, set_traceframe_number): Clear traceframe
1677 (build_traceframe_info): New function.
1678 (tfile_traceframe_info): New function.
1679 (init_tfile_ops): Install tfile_traceframe_info.
1680 (traceframe_info_start_memory, free_result): New functions.
1681 (memory_attributes, traceframe_info_elements): New globals.
1682 (parse_traceframe_info, get_traceframe_info): New functions.
1683 * features/traceframe-info.dtd: New file.
1684 * Makefile.in (XMLFILES): Add traceframe-info.dtd.
1686 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1688 Base support for <unavailable> value contents.
1690 * value.h (value_bytes_available): Declare.
1691 (mark_value_bytes_unavailable): Declare.
1692 * value.c (struct range): New struct.
1693 (range_s): New typedef.
1694 (ranges_overlap): New function.
1695 (range_lessthan): New function.
1696 (ranges_contain_p): New function.
1697 (struct value) <unavailable>: New field.
1698 (value_bytes_available): New function.
1699 (mark_value_bytes_unavailable): New function.
1700 (require_not_optimized_out): Constify parameter.
1701 (require_available): New function.
1702 (value_contents_all, value_contents): Require all bytes be
1704 (value_free): Free `unavailable'.
1705 (value_copy): Copy `unavailable'.
1706 * valprint.h (val_print_unavailable): Declare.
1707 * valprint.c (valprint_check_validity): Rename `offset' parameter
1708 to `embedded_offset'. If printing a scalar, check whether the
1709 value chunk is available.
1710 (val_print_unavailable): New.
1711 (val_print_scalar_formatted): Check whether the value is
1713 * python/py-prettyprint.c (apply_val_pretty_printer): Refuse
1714 pretty-printing unavailable values.
1716 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1718 Fix const/volatile qualifiers of C++ types, PR c++/12328.
1719 * c-typeprint.c (c_type_print_args): Update the function comment. New
1720 variable param_type, initialize it. Remove const/volatile qualifiers
1721 for language_cplus and !show_artificial. Use param_type.
1723 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1725 * symtab.c (find_pc_sect_line): New variable objfile, initialize it
1726 from S. Iterate S using ALL_OBJFILE_SYMTABS. Verify BV for each S.
1727 * symtab.h (struct symtab) <next>: Comment extension.
1729 2011-02-12 Yao Qi <yao@codesourcery.com>
1731 * Makefile.in (CLEANDIRS): Remove duplicated common dir.
1733 2011-02-11 Yao Qi <yao@codesourcery.com>
1735 * common/Makefile.in: Add copyright header.
1737 2011-02-11 Pedro Alves <pedro@codesourcery.com>
1739 * infrun.c (proceed): Move switching out and in of tfind mode from
1741 (fetch_inferior_event): ... to here.
1743 2011-02-11 Yao Qi <yao@codesourcery.com>
1745 * Makefile.in: Remove signals.o from COMMON_OBS. Link
1747 * configure.ac: Add common to sub dir.
1748 * configure: Regenerate.
1750 2011-02-11 Yao Qi <yao@codesourcery.com>
1754 * common/Makefile.in: New.
1755 * common/configure.ac: New.
1756 * common/aclocal.m4: New.
1757 * common/configure: Generate.
1759 2011-02-10 Pedro Alves <pedro@codesourcery.com>
1761 * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
1762 side of the parenthesis.
1765 2010-07-13 Jakub Jelinek <jakub@redhat.com>
1766 * vec.h (VEC_block_remove): Fix comment.
1768 2011-02-08 Michael Snyder <msnyder@vmware.com>
1770 * linux-nat.c (linux_nat_filter_event): Fix typo in comment.
1772 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1774 * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
1775 in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
1778 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1781 * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
1783 (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
1784 (i386_process_record) <0x0f3807>: Fix the comment to phsubsw.
1786 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1788 * dwarf2read.c (read_subroutine_type): Set special calling
1789 convention flag for functions compiled by IBM XL C for OpenCL.
1790 * ppc-sysv-tdep.c: Include "dwarf2.h"
1791 (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
1793 (do_ppc_sysv_return_value): Add FUNC_TYPE argument. Implement
1794 IBM OpenCL vector types calling convention.
1795 (ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
1796 (ppc_sysv_abi_broken_return_value): Likewise.
1797 (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
1798 types calling convention.
1799 (ppc64_sysv_abi_return_value): Likewise.
1800 * spu-tdep.c: Include "dwarf2.h"
1801 (spu_return_value): Implement IBM OpenCL vector types calling
1804 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1806 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
1807 correct ABI for AltiVec vector arguments.
1809 2011-02-07 Pedro Alves <pedro@codesourcery.com>
1811 * valprint.c (val_print): Extend comment.
1812 * ada-valprint.c (ada_valprint): Rewrite comment deferring
1813 interface explanation to val_print.
1814 (ada_val_print_array): Adjust comment to current interface.
1815 (print_field_values): Adjust comment to current interface.
1816 * c-valprint.c (c_val_print): Rewrite comment deferring interface
1817 explanation to val_print.
1818 * f-valprint.c (f_val_print): Ditto.
1819 * jv-valprint.c (java_val_print): Ditto.
1820 * m2-valprint.c (m2_val_print): Ditto.
1821 * p-valprint.c (pascal_val_print): Ditto.
1823 2011-02-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
1825 * breakpoint.c (parse_breakpoint_sals): Fix description.
1827 2011-02-04 Sami Wagiaalla <swagiaal@redhat.com>
1828 Oguz Kayral <oguzkayral@gmail.com>
1830 * python/py-inferior.c (python_on_normal_stop): New function.
1831 (python_on_resume): New function.
1832 (python_inferior_exit): New function.
1833 (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
1834 inferior_exit observers.
1835 * python/py-evtregistry.c: New file.
1836 * python/py-threadevent.c : New file.
1837 * python/py-event.c: New file.
1838 * python/py-evts.c: New file.
1839 * python/py-continueevent.c: New file.
1840 * python/py-bpevent.c: New file.
1841 * python/py-signalevent.c: New file.
1842 * python/py-exetiedevent.c: New file.
1843 * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
1844 Move struct breakpoint_object from here...
1845 * python/python-internal.h: ... to here.
1846 * python/py-event.h: New file.
1847 * python/py-events.h: New file.
1848 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
1849 py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
1850 py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
1851 (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
1852 py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
1853 py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
1854 Add build rules for all the above.
1856 2011-02-04 Tom Tromey <tromey@redhat.com>
1858 * dwarf2read.c (dwarf2_section_empty_p): New function.
1859 (dwarf2_read_section): Use dwarf2_section_empty_p.
1860 (dwarf2_section_size): New function.
1861 (dwarf2_get_section_info): Unconditionally read section.
1862 (dwarf2_read_index): Use dwarf2_section_empty_p.
1863 (partial_read_comp_unit_head): Use dwarf2_section_size.
1864 (dwarf2_symbol_mark_computed): Likewise.
1866 2011-02-04 David Daney <ddaney@caviumnetworks.com>
1868 * NEWS: Add item for "catch syscall" on mips*-linux* targets.
1870 2011-02-04 David Daney <ddaney@caviumnetworks.com>
1872 * mips-linux-tdep.c: Include xml-syscall.h.
1873 (mips_linux_get_syscall_number): New function.
1874 (mips_linux_init_abi): Add calls to
1875 mips_linux_get_syscall_number() and set_xml_syscall_file_name().
1876 * data-directory/Makefile.in (SYSCALLS_FILES): Add
1877 mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
1878 * syscalls/mips-n32-linux.xml: New file.
1879 * syscalls/mips-n64-linux.xml: New file.
1880 * syscalls/mips-o32-linux.xml: New file.
1882 2011-02-04 Ulrich Weigand <ulrich.weigand@linaro.org>
1884 * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
1885 Complain about inverted range entries.
1886 (dwarf2_record_block_ranges): Likewise.
1888 2011-02-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
1891 * breakpoint.c (update_watchpoint): Fix name of the
1892 update_global_location_list function.
1893 (print_one_breakpoint): Fix typo.
1894 (_initialize_breakpoint): Remove extra space in hbreak help
1896 * breakpoint.h (struct bp_location) <length>: Fix field
1899 2011-02-04 Pedro Alves <pedro@codesourcery.com>
1901 * regcache.c (registers_changed_ptid): Don't explictly always
1902 clear `current_regcache'. Only clear current_thread_ptid and
1903 current_thread_arch when PTID matches. Only reinit the frame
1904 cache if PTID matches the current inferior_ptid. Move alloca(0)
1906 (registers_changed): ... here.
1908 2011-02-03 Ulrich Weigand <ulrich.weigand@linaro.org>
1910 * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
1911 starts with __stack_chk_guard as stack guard symbol.
1913 2011-02-03 Andrew Burgess <aburgess@broadcom.com>
1915 * disasm.c (compare_lines): Handle the end of sequence markers
1916 within the line table to better support disassembling over
1917 compilation unit boundaries.
1919 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1921 * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
1922 arguments. Skip in-prologue calls to glibc __aeabi_read_tp
1923 implementation even if no symbols are available.
1924 (thumb_analyze_prologue): Update call to skip_prologue_function.
1925 (arm_analyze_prologue): Likewise.
1927 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1929 * arm-tdep.c: Include "observer.h".
1930 (arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
1931 (arm_exidx_data_key): New static variable.
1932 (struct arm_exidx_entry, arm_exidx_entry_s): New data types.
1933 (struct arm_exidx_data): Likewise.
1934 (arm_exidx_data_free): New function.
1935 (arm_compare_exidx_entries): Likewise.
1936 (arm_obj_section_from_vma): Likewise.
1937 (arm_exidx_new_objfile): Likewise.
1938 (arm_find_exidx_entry): Likewise.
1939 (arm_exidx_fill_cache): Likewise.
1940 (arm_exidx_unwind_sniffer): Likewise.
1941 (arm_exidx_unwind): New global variable.
1942 (arm_gdbarch_init): Append unwinder arm_exidx_unwind.
1943 (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
1944 observer. Register arm_exidx_data_key as objfile data.
1946 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1948 * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
1949 due to accessing uninitialized variable. Fix indentation.
1951 2011-02-02 Pedro Alves <pedro@codesourcery.com>
1953 * c-valprint.c (c_value_print): When doing virtual base pointer
1954 adjustment, create a new value with adjusted contents rather than
1955 changing the contents of the value being printed (and getting it
1958 2011-02-02 Pedro Alves <pedro@codesourcery.com>
1960 * xml-support.c (xml_find_attribute): New.
1961 (xinclude_start_include): Use it.
1962 * xml-support.h (xml_find_attribute): Declare.
1963 * memory-map.c (memory_map_start_memory)
1964 (memory_map_start_property): Use xml_find_attribute.
1965 * osdata.c (osdata_start_osdata, osdata_start_column): Use
1967 * remote.c (start_thread): Use xml_find_attribute.
1968 * solib-target.c (library_list_start_segment)
1969 (library_list_start_section, library_list_start_library)
1970 (library_list_start_list): Use xml_find_attribute.
1971 * xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
1972 (tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
1973 (tdesc_start_field): Use xml_find_attribute.
1975 2011-02-02 Ulrich Weigand <uweigand@de.ibm.com>
1977 * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
1978 (BUILD_OCL_VTYPES): Update.
1980 2011-02-02 Joel Brobecker <brobecker@adacore.com>
1982 * configure.ac: Work around non-GNU sed limitation when computing
1983 python version number.
1984 * configure: Regenerate.
1986 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1988 Fix debug printing of TYPE_INSTANCE.
1989 * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
1990 (dump_subexp_body_standard) <TYPE_INSTANCE>: New.
1992 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1994 Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
1995 OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
1996 OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
1997 * ada-operator.inc: Rename the file to ...
1998 * ada-operator.def: ... here, wrap all the entries by macro OP.
1999 * expprint.c (op_name_standard): Remove all the entries. Include
2000 "std-operator.def" instead.
2001 * expression.h (enum exp_opcode): Include "std-operator.def" and
2002 "ada-operator.def". Move all the entries ...
2003 * std-operator.def: ... here, wrap all the entries by macro OP.
2005 2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
2007 * breakpoint.h (remove_jit_event_breakpoints): New prototype.
2008 * breakpoint.c (remove_jit_event_breakpoints): New function.
2009 * jit.c (jit_descriptor_addr): Delete.
2010 (registering_code): Delete.
2011 (clear_int): Delete.
2012 (jit_inferior_data): New variable.
2013 (struct jit_inferior_data): New type.
2014 (get_jit_inferior_data): New function.
2015 (jit_inferior_data_cleanup): New function.
2016 (jit_read_descriptor): Adjust.
2017 (jit_register_code): Adjust.
2018 (jit_breakpoint_re_set_internal): New function; move code here ...
2019 (jit_inferior_init): ... from here.
2020 (jit_breakpoint_re_set): Adjust.
2021 (jit_reset_inferior_data_and_breakpoints): New function.
2022 (jit_inferior_created_observer): Adjust.
2023 (jit_inferior_exit_hook): Adjust.
2024 (jit_executable_changed_observer): New function.
2025 (jit_event_handler): Adjust.
2026 (_initialize_jit): Adjust.
2028 2011-01-31 Michael Snyder <msnyder@vmware.com>
2030 * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
2033 2011-01-31 Tom Tromey <tromey@redhat.com>
2036 * python/python.c (execute_gdb_command): Call
2037 prevent_dont_repeat.
2038 * top.c (suppress_dont_repeat): New global.
2039 (dont_repeat): Use it.
2040 (prevent_dont_repeat): New function.
2041 * command.h (prevent_dont_repeat): Declare.
2043 2011-01-31 Tom Tromey <tromey@redhat.com>
2045 * infcmd.c (finish_backward): Use breakpoint_set_silent.
2046 * python/py-breakpoint.c (bppy_set_silent): Use
2047 breakpoint_set_silent.
2048 (bppy_set_thread): Use breakpoint_set_thread.
2049 (bppy_set_task): Use breakpoint_set_task.
2050 * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
2051 (breakpoint_set_task): Declare.
2052 (make_breakpoint_silent): Remove.
2053 * breakpoint.c (breakpoint_set_silent): New function.
2054 (breakpoint_set_thread): Likewise.
2055 (breakpoint_set_task): Likewise.
2056 (make_breakpoint_silent): Remove.
2058 2011-01-31 Tom Tromey <tromey@redhat.com>
2060 * breakpoint.h (user_breakpoint_p): Declare.
2061 * breakpoint.c (user_breakpoint_p): New function.
2062 (breakpoint_1): Use it.
2063 (save_breakpoints): Likewise.
2065 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2067 * configure.ac: Add handling of Python distribution on Windows.
2068 * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
2069 sysconfig variables are not defined, then do not use them.
2070 On Windows, if LIBPL is not defined, then use prefix + '/libs'
2071 instead. On Windows, return all paths using forward-slashes
2072 rather than backslashes.
2074 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2076 * configure.ac: Remove fallback behavior for building
2077 against Python. Remove tweaking of Python include path.
2078 Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
2079 (AC_TRY_LIBPYTHON): Adjust program used in linking test.
2080 If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
2081 Always restore CPPFLAGS and LIBS after linking test.
2082 * configure: Regenerated.
2083 * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
2084 (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
2085 * python/python-internal.h: Adjust includes of Python .h files.
2087 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2089 * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
2092 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2094 * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
2097 2011-01-31 Yao Qi <yao@codesourcery.com>
2099 * arm-linux-nat.c: Update calls to regcache_register_status
2100 instead of regcache_valid_p.
2101 * aix-thread.c: Likewise.
2102 * i386gnu-nat.c: Likewise.
2104 2011-01-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2107 * valops.c (compare_parameters): Verify TYPE_NFIELDS before
2108 touching TYPE_FIELD_ARTIFICIAL.
2110 2011-01-28 Richard Earnshaw <rearnsha@arm.com>
2112 * MAINTAINERS: Move myself from Responsible Maintainers to Authorized
2115 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2117 * tracepoint.c (tfile_xfer_partial): If there's no traceframe
2118 selected, don't try iterating over the traceframe's blocks.
2119 (tfile_has_stack): If there's no traceframe selected, then there's
2121 (tfile_has_registers): If there's no traceframe selected, then
2122 there's no registers.
2124 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2126 * target.c (memory_xfer_partial): No need to restore shadows if we
2127 haven't read anything.
2129 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2131 * mips-tdep.c (mips_print_register): Use get_frame_register_value
2132 and val_print_scalar_formatted.
2134 2011-01-27 Pedro Alves <pedro@codesourcery.com>
2136 * tracepoint.c (tfile_read): New.
2137 (tfile_open): Use it.
2138 (tfile_get_traceframe_address): Use it.
2139 (tfile_trace_find): Use it.
2140 (walk_blocks_callback_func): New typedef.
2141 (match_blocktype): New function.
2142 (traceframe_walk_blocks): New function.
2143 (traceframe_find_block_type): New function.
2144 (tfile_fetch_registers, tfile_xfer_partial)
2145 (tfile_get_trace_state_variable_value): Use
2146 traceframe_find_block_type and tfile_read.
2148 2011-01-26 Kevin Buettner <kevinb@redhat.com>
2150 * remote-mips.c: Add internationalization mark ups. Remove
2151 trailing \n from already marked up strings.
2153 2011-01-26 Tom Tromey <tromey@redhat.com>
2155 * python/py-prettyprint.c (print_string_repr): Clear
2156 'addressprint' option when calling val_print_string.
2157 (print_children): Handle Val_pretty_default. Clear 'addressprint'
2158 option when calling val_print_string.
2160 2011-01-26 Tom Tromey <tromey@redhat.com>
2162 * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
2164 * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
2166 (gdb_py_longest, gdb_py_ulongest): New typedefs.
2167 (gdb_py_long_from_longest, gdb_py_long_from_ulongest)
2168 (gdb_py_long_as_ulongest): New defines.
2169 (gdb_py_object_from_longest, gdb_py_object_from_ulongest)
2170 (gdb_py_int_as_long): Declare.
2171 * python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
2172 GDB_PY_LL_ARG, gdb_py_object_from_longest.
2173 (valpy_long): Add comment.
2174 * python/py-utils.c (get_addr_from_python): Use
2175 gdb_py_long_as_ulongest. Handle overflow properly.
2176 (gdb_py_object_from_longest): New function.
2177 (gdb_py_object_from_ulongest): Likewise.
2178 (gdb_py_int_as_long): Likewise.
2179 * python/py-type.c (typy_array): Use gdb_py_int_as_long.
2180 * python/py-symtab.c (salpy_get_pc): Use
2181 gdb_py_long_from_ulongest.
2182 (salpy_get_line): Use PyInt_FromLong.
2183 * python/py-param.c (set_parameter_value): Use
2185 * python/py-lazy-string.c (stpy_get_address): Use
2186 gdb_py_long_from_ulongest.
2187 * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
2188 * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
2189 * python/py-breakpoint.c (bppy_set_thread): Use
2191 (bppy_set_task): Likewise.
2192 (bppy_set_ignore_count): Likewise.
2193 (bppy_set_hit_count): Likewise.
2194 * python/py-block.c (blpy_get_start): Use
2195 gdb_py_object_from_ulongest.
2196 (blpy_get_end): Likewise.
2197 (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.
2199 2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr>
2202 * gdb/objfiles.h (struct objfile) <addr_low>: New field.
2203 * gdb/solib.c (solib_read_symbols): Check for addr_low in
2204 equality test for objfile, initialize addr_low if needed.
2206 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2208 * tui/tui-regs.c (tui_register_format): Remove dead code.
2210 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2212 * printcmd.c (print_formatted): Use val_print_scalar_formatted
2213 instead of print_scalar_formatted.
2214 (print_scalar_formatted): Don't handle 's' format strings here,
2215 and add an assertion that we never see such format here.
2216 * valprint.h (val_print_scalar_formatted): Declare.
2217 * valprint.c (val_print_scalar_formatted): New.
2218 * c-valprint.c (c_val_print): Use val_print_scalar_formatted
2219 instead of print_scalar_formatted.
2220 * jv-valprint.c (java_val_print): Ditto.
2221 * p-valprint.c (pascal_val_print): Ditto.
2222 * ada-valprint.c (ada_val_print_1): Ditto.
2223 * f-valprint.c (f_val_print): Ditto.
2224 * infcmd.c (registers_info): Ditto.
2225 * m2-valprint.c (m2_val_print): Ditto.
2227 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2229 * m2-valprint.c (print_unbounded_array): Pass
2230 value_contents_for_printing rather than value_contents, to
2231 m2_print_array_contents. Also pass in the value.
2233 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com>
2235 * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
2236 (save_gdb_index_command): Switch to .gdb_index version 4.
2238 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2240 * mi/mi-main.c (get_register): Use get_frame_register_value rather
2241 than frame_register, and always pass a valid value to val_print.
2243 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2245 Centralize printing "<optimized out>".
2247 * valprint.h (val_print_optimized_out): Declare.
2248 * cp-valprint.c (cp_print_value_fields): Use
2249 val_print_optimized_out.
2250 * jv-valprint.c (java_print_value_fields): Ditto.
2251 * p-valprint.c (pascal_object_print_value_fields): Ditto.
2252 * printcmd.c (print_formatted): Ditto.
2253 * valprint.c (valprint_check_validity): Ditto.
2254 (value_check_printable): Ditto.
2255 (val_print_optimized_out): New.
2257 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2259 * infcmd.c (default_print_registers_info): Allocate values so to
2260 never pass a NULL value to val_print.
2262 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2264 * cp-valprint.c (cp_print_value): Treat the 'skip' local as
2265 boolean. Make sure to always pass a value that matches the
2266 contents buffer to callees. Preserve `address' for following
2268 * value.c (value_contents_for_printing_const): New.
2269 (value_address): Constify value argument.
2270 * value.h (value_contents_for_printing_const): Declare.
2271 (value_address): Constify value argument.
2273 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2275 * regcache.c (struct regcache_descr): Rename
2276 sizeof_raw_register_valid_p field to sizeof_raw_register_status,
2277 and sizeof_cooked_register_valid_p to
2278 sizeof_cooked_register_status.
2279 (init_regcache_descr): Adjust.
2280 (struct regcache): Rename register_valid_p field to
2282 (regcache_xmalloc_1, regcache_xfree, regcache_save)
2283 (do_cooked_read): Adjust.
2284 (regcache_valid_p): Rename to ...
2285 (regcache_register_status): ... this. Adjust.
2286 (regcache_invalidate): Adjust.
2287 (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
2289 (regcache_raw_supply): Adjust. If buf i NULL, mark the register
2290 as unavailable, not valid.
2291 (regcache_dump): Adjust.
2292 * regcache.h (enum register_status): New.
2293 (regcache_register_status): Declare.
2294 (regcache_invalidate): Delete declaration.
2295 * corelow.c (get_core_registers): Adjust.
2296 * tracepoint.c (tfile_fetch_registers): Adjust.
2297 * trad-frame.c (REG_VALUE): Rename to ...
2298 (TF_REG_VALUE): ... this.
2299 (REG_UNKNOWN): Rename to ...
2300 (TF_REG_UNKNOWN): ... this.
2301 (trad_frame_set_value, trad_frame_set_unknown): Adjust.
2302 * mi/mi-main.c (register_changed_p): Adjust.
2304 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2306 * regcache.c (struct regcache_descr): Remove outdated comment.
2307 (init_regcache_descr): Remove sizeof_raw_register_valid_p
2309 (regcache_xmalloc): Rename to ...
2310 (regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
2311 Allocate the regcache type accordingly.
2312 (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
2313 (regcache_xfree): Asser the source is also readonly. Copy sizeof
2314 cooked registers, not raw.
2315 (regcache_dup_no_passthrough): Delete.
2316 (get_thread_arch_regcache): Use regcache_xmalloc_1.
2317 * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
2318 mention obsolete write_register_bytes.
2319 * regcache.h (regcache_dup_no_passthrough): Delete declaration.
2321 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2323 Stop remote_read_bytes from handling partial reads itself.
2325 * remote-fileio.c: Include target.h.
2326 (remote_fileio_write_bytes): Delete.
2327 (remote_fileio_func_open, remote_fileio_func_write)
2328 (remote_fileio_func_rename, remote_fileio_func_unlink): Use
2330 (remote_fileio_func_stat): Use target_read_memory and
2331 target_write_memory.
2332 (remote_fileio_func_gettimeofday): Use target_write_memory.
2333 (remote_fileio_func_system): Use target_read_memory.
2334 * remote.c (remote_write_bytes): Make it static.
2335 (remote_read_bytes): Don't handle partial reads here.
2336 * remote.h (remote_read_bytes): Delete declaration.
2338 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2340 Simplify XML parsing a bit.
2342 * xml-support.h (gdb_xml_parse_quick): Declare.
2343 * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
2344 from gdb_xml_create_parser_and_cleanup, and added `old_chain'
2346 (gdb_xml_create_parser_and_cleanup): Reimplement on top of
2347 gdb_xml_create_parser_and_cleanup_1.
2348 (gdb_xml_parse_quick): New.
2349 * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
2350 * osdata.c (osdata_parse): Ditto.
2351 * remote.c (remote_threads_info): Ditto.
2352 * solib-target.c (solib_target_parse_libraries): Ditto.
2353 * xml-syscall.c (syscall_parse_xml): Ditto.
2354 * xml-tdesc.c (tdesc_parse_xml): Ditto.
2356 2011-01-24 Kevin Buettner <kevinb@redhat.com>
2358 * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
2359 with remote-mips.o added to gdb_target_obs.
2360 * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
2362 2011-01-24 Pedro Alves <pedro@codesourcery.com>
2364 * ada-valprint.c (val_print_packed_array_elements): Pass the
2365 correct struct value to val_print.
2366 (ada_val_print_1): Ditto.
2368 2011-01-24 Pedro Alves <pedro@codesourcery.com>
2370 Don't lose embedded_offset in printing routines throughout.
2372 * valprint.h (val_print_array_elements): Change prototype.
2373 * valprint.c (val_print_array_elements): Add `embedded_offset'
2374 parameter, and adjust to pass it down to val_print, while passing
2375 `valaddr' or `address' unmodified. Take embedded_offset into
2376 account when checking repetitions.
2377 * c-valprint.c (c_val_print): Pass embedded_offset to
2378 val_print_array_elements instead of adjusting `valaddr' and
2380 * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
2381 embedded_offset to val_print_array_elements instead of adjusting
2383 * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
2384 * p-valprint.c (pascal_val_print): Pass embedded_offset to
2385 val_print_array_elements and pascal_object_print_value_fields
2386 instead of adjusting `valaddr'.
2387 (pascal_object_print_value_fields): Add `offset' parameter, and
2389 (pascal_object_print_value): Add `offset' parameter, and adjust to
2391 (pascal_object_print_static_field): Use
2392 value_contents_for_printing/value_embedded_offset, rather than
2394 * ada-valprint.c (val_print_packed_array_elements): Add `offset'
2395 parameter, and adjust to use it. Use
2396 value_contents_for_printing/value_embedded_offset, rather than
2398 (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
2399 (ada_val_print_array): Add `offset' parameter, and adjust to use
2401 (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
2402 `embedded_offset' to `offset'. Don't re-adjust `valaddr'.
2403 Instead work with offsets. Use
2404 value_contents_for_printing/value_embedded_offset, rather than
2405 value_contents. Change `defer_val_int' local type to CORE_ADDR,
2406 and use value_from_pointer to extract a target pointer, rather
2407 than value_from_longest.
2408 (print_variant_part): Add `offset' parameter. Replace
2409 `outer_valaddr' parameter by a new `outer_offset' parameter.
2410 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2411 (ada_value_print): Use
2412 value_contents_for_printing/value_embedded_offset, rather than
2414 (print_record): Add `offset' parameter, and adjust to pass it
2416 (print_field_values): Add `offset' parameter. Replace
2417 `outer_valaddr' parameter by a new `outer_offset' parameter.
2418 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2419 Use value_contents_for_printing/value_embedded_offset, rather than
2421 * d-valprint.c (dynamic_array_type): Use
2422 value_contents_for_printing/value_embedded_offset, rather than
2424 * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
2425 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2426 (java_print_value_fields): Take `offset' into account. Don't
2427 re-adjust `valaddr'. Instead pass down adjusted offsets.
2428 (java_val_print): Take `embedded_offset' into account. Pass it to
2429 java_print_value_fields.
2430 * f-valprint.c (f77_print_array_1): Add `embedded_offset'
2431 parameter. Don't re-adjust `valaddr' or `address'. Instead pass
2432 down adjusted offsets.
2433 (f77_print_array): Add `embedded_offset' parameter. Pass it down.
2434 (f_val_print): Take `embedded_offset' into account.
2436 2011-01-21 Joel Brobecker <brobecker@adacore.com>
2438 * inflow.c: Include "gdbcmd.h".
2439 (interactive_mode): New static global, moved here from top.c.
2440 (show_interactive_mode): New function, moved here from top.c.
2441 use gdb_has_a_terminal instead of input_from_terminal_p to
2442 determine the current mode.
2443 (gdb_has_a_terminal): Add handling of the "iteractive-mode"
2445 (_initialize_inflow): Add the "set/show interactive-mode"
2446 commands. Moved here from top.c, after having adjusted slightly
2448 * top.c (interactive_mode, show_interactive_mode): Delete, moved
2450 (input_from_terminal_p): Remove handling of "interactive-mode"
2451 setting, moved to infow.c.
2452 (init_main): Remove creation of the "set/show interactive-mode"
2453 commands, moved to inflow.c.
2455 2011-01-19 Joel Brobecker <brobecker@adacore.com>
2457 * NEWS: Add entry for native ia64-hpux support.
2459 2011-01-19 Tom Tromey <tromey@redhat.com>
2462 * thread.c (free_thread): Free 'name'.
2463 (print_thread_info): Emit thread name. Change CLI output.
2464 (thread_name_command): New function.
2465 (do_captured_thread_select): Emit newline.
2466 (_initialize_thread): Register 'thread name' command.
2467 * target.h (struct target_ops) <to_thread_name>: New field.
2468 (target_thread_name): New macro.
2469 * target.c (update_current_target): Handle to_thread_name.
2470 * python/py-infthread.c (thpy_get_name): New function.
2471 (thpy_set_name): Likewise.
2472 (thread_object_getset): Add "name".
2473 * linux-nat.c (linux_nat_thread_name): New function.
2474 (linux_nat_add_target): Set to_thread_name.
2475 * gdbthread.h (struct thread_info) <name>: New field.
2477 2011-01-18 Joel Brobecker <brobecker@adacore.com>
2479 * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
2480 (ada_val_print_1): Likewise.
2482 2011-01-18 Joel Brobecker <brobecker@adacore.com>
2484 * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
2485 upper limit address is not greater than the function end address
2486 when the upper limit could not be computed using the debugging
2489 2011-01-17 Tom Tromey <tromey@redhat.com>
2491 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
2493 * utils.c: Include gdb_regex.h.
2494 (do_regfree_cleanup): New function.
2495 (make_regfree_cleanup): Likewise.
2496 (get_regcomp_error): Likewise.
2497 * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
2499 2011-01-17 Tom Tromey <tromey@redhat.com>
2501 * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
2504 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
2506 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
2507 for internal variables.
2508 (last_was_structop): New static variable.
2509 (COMPLETE): New token.
2510 (field_exp): New rule to group all '.' suffix handling.
2511 Add mark_struct_expression calls when approriate to be able
2512 to correctly find fields for completion.
2513 (yylex): Adapt to handle field completion and set INTVAR when
2516 2011-01-14 Yao Qi <yao@codesourcery.com>
2518 * arm-tdep.c (arm_register_reggroup_p): FPS register is in
2519 save_reggroup, restore_reggroup and all_reggroup.
2521 2011-01-14 Joel Brobecker <brobecker@adacore.com>
2523 * ada-valprint. (ada_printchar): Use the correct type length
2524 in call to ada_emit_char.
2525 * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
2527 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
2529 * solib-som.h (hpux_major_release): Declare variable here.
2530 * solib-som.c: Remove <sys/utsname.h> header.
2531 (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
2532 (hpux_major_release): Make global, change default value to
2533 DEFAULT_HPUX_MAJOR_RELEASE.
2534 (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
2535 * hppa-hpux-nat.c: Add <sys/utsname.h> include.
2536 Add "solib-som.h" header.
2537 (set_hpux_major_release): New function.
2538 (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
2540 2011-01-14 Mike Frysinger <vapier@gentoo.org>
2542 * configure.tgt (*-*-uclinux*): Match more Linux os targets
2544 2011-01-14 Joel Brobecker <brobecker@adacore.com>
2546 * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
2547 new-line at end of warning message.
2548 (ia64_hpux_store_register): Remove trailing new-line at end of
2550 * ia64-hpux-tdep.c: Rephrase comment.
2551 * solib-ia64-hpux.c (struct dld_info): Change type of field
2552 dld_flags from "long long" to ULONGEST.
2554 2011-01-14 Pedro Alves <pedro@codesourcery.com>
2556 * target.h (deprecated_child_ops): Delete declaration.
2557 * target.c (deprecated_child_ops): Delete definition.
2559 2011-01-14 Pedro Alves <pedro@codesourcery.com>
2561 * Makefile.in (hpux-thread.o): Delete rule.
2562 * configure.ac: Don't check for HPUX DCE threads support.
2563 * configure, config.in: Regenerate.
2564 * hppa-hpux-nat.c (child_suppress_run): Delete.
2565 (hppa_hpux_child_can_run): Delete.
2566 (_initialize_hppa_hpux_nat): Don't override to_can_run.
2567 * hpux-thread.c: Delete.
2569 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2571 * hpux-thread.c (hpux_pid_to_str): Delete.
2573 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2575 * ada-valprint.c (ada_emit_char): Remove strange code.
2576 Check that c is <= UCHAR_MAX before passing it to isascii.
2577 (char_at): Do not assume that TYPE_LEN is either 1 or 2.
2579 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2581 * top.c (input_from_terminal_p): Restrict the use of interactive_mode
2582 to the case where instream is stdin.
2584 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2586 * ia64-tdep.h (struct regcache): Forward declare.
2587 (struct ia64_infcall_ops): New struct type.
2588 (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
2590 * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
2591 Renames ia64_find_global_pointer.
2592 (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
2593 (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
2594 (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
2596 (ia64_infcall_ops): New static global constant.
2597 (ia64_gdbarch_init): Set tdep->infcall_ops.
2598 * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
2599 (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
2600 * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
2601 (ia64_hpux_dummy_code): New static global constant.
2602 (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
2603 (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
2604 (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
2606 (ia64_hpux_infcall_ops): New static global constant.
2607 (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
2608 for inferior function calls to work properly on ia64-hpux.
2610 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2612 * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
2613 * ia64-tdep.h (struct frame_info): forward declaration.
2614 (struct gdbarch_tdep): Add field size_of_register_frame.
2615 * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
2616 to determine the size of the register frame.
2617 (ia64_size_of_register_frame): New function.
2618 (ia64_gdbarch_init): Set tdep->size_of_register_frame.
2619 * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
2620 (IA64_HPUX_UREG_REASON): New macro.
2621 (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
2623 (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
2624 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
2625 (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
2628 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2630 Add support for ia64-hpux.
2631 * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
2632 ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
2634 * configure.host: Add handling for ia64-hpux hosts. Add associated
2636 * configure.tgt: Add handling for ia64-hpux targets.
2637 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
2638 (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
2639 (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
2641 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2643 [ttrace] Compute thread list immediately after attach.
2644 * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
2646 (inf_ttrace_attach): Use it.
2648 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2650 * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
2651 if we could not determine the frame's function address. Instead,
2652 use the frame's PC, and then continue.
2654 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2656 * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
2657 not already defined.
2659 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2661 * ia64-tdep.c (ia64_struct_type_p): New function.
2662 (ia64_extract_return_value): Handle integral values that are
2663 less than 8 bytes long.
2664 (ia64_push_dummy_call): Likewise.
2666 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2668 * ia64-tdep.c (floatformat_ia64_ext_little): Renames
2669 floatformat_ia64_ext.
2670 (floatformat_ia64_ext_big): New static const.
2671 (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
2673 2011-01-12 Tom Tromey <tromey@redhat.com>
2675 * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
2677 * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
2678 (mi_cmd_thread_list_ids): Likewise.
2679 (mi_cmd_data_list_changed_registers): Likewise.
2680 (mi_cmd_data_list_register_values): Likewise.
2681 (mi_cmd_data_write_register_values): Likewise.
2682 (mi_cmd_data_evaluate_expression): Likewise.
2683 (mi_cmd_data_read_memory): Likewise.
2684 (mi_cmd_data_read_memory_bytes): Likewise.
2685 (mi_cmd_data_write_memory): Likewise.
2686 (mi_cmd_enable_timings): Likewise.
2687 * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
2688 * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
2689 (mi_cmd_var_delete): Likewise.
2690 (mi_cmd_var_set_format): Likewise.
2691 (mi_cmd_var_show_format): Likewise.
2692 (mi_cmd_var_info_num_children): Likewise.
2693 (mi_cmd_var_list_children): Likewise.
2694 (mi_cmd_var_info_type): Likewise.
2695 (mi_cmd_var_info_expression): Likewise.
2696 (mi_cmd_var_show_attributes): Likewise.
2697 (mi_cmd_var_assign): Likewise.
2698 (mi_cmd_var_update): Likewise.
2699 (mi_cmd_enable_pretty_printing): Likewise.
2700 (mi_cmd_var_set_update_range): Likewise.
2701 * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
2703 (mi_cmd_target_file_put): Likewise.
2704 (mi_cmd_target_file_delete): Likewise.
2705 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
2707 (mi_cmd_stack_info_depth): Likewise.
2708 (mi_cmd_stack_list_locals): Likewise.
2709 (mi_cmd_stack_list_args): Likewise.
2710 (mi_cmd_stack_select_frame): Likewise.
2711 (mi_cmd_stack_select_frame): Likewise.
2712 (mi_cmd_stack_info_frame): Likewise.
2713 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
2715 (mi_cmd_file_list_exec_source_files): Likewise.
2716 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
2717 (mi_cmd_env_cd): Likewise.
2718 (mi_cmd_env_path): Likewise.
2719 (mi_cmd_env_dir): Likewise.
2720 (mi_cmd_inferior_tty_show): Likewise.
2721 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
2722 * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
2723 (mi_cmd_break_watch): Likewise.
2725 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
2727 * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
2728 (ppc_linux_insert_hw_breakpoint): Likewise.
2729 (ppc_linux_remove_hw_breakpoint): Likewise.
2730 (ppc_linux_insert_watchpoint): Likewise.
2732 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
2733 Jan Kratochvil <jan.kratochvil@redhat.com>
2735 PR fortran/11104 and DWARF unbound arrays detection.
2736 * dwarf2read.c (read_subrange_type): Set zero length on unspecified
2737 upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
2738 unspecified upper bound.
2739 * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
2740 variables array_size_array, tmp_type and offset_item. New variable
2741 array. Remove call to f77_get_upperbound. New variables array_type
2742 and index. Call value_subscripted_rvalue for each dimenasion. Remove
2743 the final call to deprecated_set_value_type.
2745 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2747 Make value allocations more lazy.
2748 * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
2749 instead of allocate_value and set_value_lazy when possible.
2750 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
2751 instead of allocate_value and set_value_lazy.
2752 * findvar.c (value_of_register_lazy): Likewise.
2753 (read_var_value): Remove V preallocation, call just check_typedef in
2754 advance. Move allocate_value to LOC_CONST, LOC_LABEL,
2755 LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
2756 LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
2757 set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
2758 remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
2759 in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
2760 the end, remove set_value_lazy there.
2761 * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
2762 instead of allocate_value and set_value_lazy when possible.
2763 * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
2764 * value.c (allocate_computed_value): Use allocate_value_lazy instead
2765 of allocate_value and set_value_lazy.
2766 (value_from_contents_and_address): Use allocate_value_lazy instead of
2767 allocate_value and set_value_lazy when possible.
2769 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
2771 * disasm.c (dump_insns): Support dumping opcodes for MI.
2772 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
2773 dumping of instruction opcodes.
2775 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch)
2777 * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
2780 2011-01-11 Tom Tromey <tromey@redhat.com>
2782 * thread.c (do_captured_thread_select): Emit newline before
2785 2011-01-11 Michael Snyder <msnyder@vmware.com>
2787 * s390-tdep.c: Comment cleanup, mostly periods and spaces.
2788 * score-tdep.c: Ditto.
2789 * score-tdep.h: Ditto.
2790 * ser-base.c: Ditto.
2791 * ser-go32.c: Ditto.
2794 * ser-mingw.c: Ditto.
2795 * ser-pipe.c: Ditto.
2797 * ser-unix.c: Ditto.
2798 * sh64-tdep.c: Ditto.
2799 * shnbsd-nat.c: Ditto.
2803 * solib-darwin.c: Ditto.
2804 * solib-frv.c: Ditto.
2806 * solib-irix.c: Ditto.
2807 * solib-osf.c: Ditto.
2808 * solib-pa64.c: Ditto.
2809 * solib-som.c: Ditto.
2810 * solib-spu.c: Ditto.
2811 * solib-sunos.c: Ditto.
2812 * solib-svr4.c: Ditto.
2814 * sol-thread.c: Ditto.
2818 * sparc64-linux-tdep.c: Ditto.
2819 * sparc64-tdep.c: Ditto.
2820 * sparc-linux-nat.c: Ditto.
2821 * sparc-linux-tdep.c: Ditto.
2822 * sparc-sol2-nat.c: Ditto.
2823 * sparc-sol2-tdep.c: Ditto.
2824 * sparc-tdep.c: Ditto.
2825 * sparc-tdep.h: Ditto.
2826 * spu-tdep.c: Ditto.
2827 * stabsread.c: Ditto.
2828 * stabsread.h: Ditto.
2836 * target-descriptions.c: Ditto.
2837 * target-descriptions.h: Ditto.
2839 * target-memory.c: Ditto.
2840 * terminal.h: Ditto.
2843 * tracepoint.c: Ditto.
2844 * tracepoint.h: Ditto.
2845 * trad-frame.h: Ditto.
2846 * typeprint.c: Ditto.
2848 2011-01-11 Michael Snyder <msnyder@vmware.com>
2850 * ui-file.c: Comment cleanup, mostly periods and spaces.
2855 * v850-tdep.c: Ditto.
2856 * valarith.c: Ditto.
2858 * valprint.c: Ditto.
2859 * valprint.h: Ditto.
2864 * vax-tdep.c: Ditto.
2868 * windows-nat.c: Ditto.
2869 * windows-tdep.c: Ditto.
2870 * xcoffread.c: Ditto.
2871 * xcoffsolib.c: Ditto.
2872 * xml-support.c: Ditto.
2873 * xstormy16-tdep.c: Ditto.
2874 * xtensa-tdep.c: Ditto.
2875 * xtensa-tdep.h: Ditto.
2877 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2879 * breakpoint.c (resources_needed_watchpoint): Fix indentation.
2880 * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
2882 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2883 Thiago Jung Bauermann <bauerman@br.ibm.com>
2885 Implement support for PowerPC BookE ranged watchpoints.
2887 (struct breakpoint_ops) <resources_needed>: New method.
2888 Initialize to NULL in all existing breakpoint_ops instances.
2889 (struct breakpoint) <exact>: New field.
2890 (target_exact_watchpoints): Declare external global.
2891 * breakpoint.c (target_exact_watchpoints): New global flag.
2892 (update_watchpoint): Set b->type to bp_hardware_watchpoint and
2893 b->enable_state to bp_enabled before calling
2894 hw_watchpoint_used_count.
2895 (hw_watchpoint_used_count): Iterate over all bp_locations in a
2896 watchpoint. Call breakpoint's breakpoint_ops.resources_needed
2898 (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
2899 if the watchpoint is exact.
2900 (resources_needed_watchpoint): New function.
2901 (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
2902 (watch_command_1): Set b->exact if the user asked for an exact
2903 watchpoint and one can be set.
2904 (can_use_hardware_watchpoint): Add exact_watchpoints argument.
2905 Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
2906 the user asks for an exact watchpoint and one can be set. Return
2907 number of needed debug registers to watch the expression.
2908 * gdbtypes.c (is_scalar_type): New function, based on
2909 valprint.c:scalar_type_p.
2910 (is_scalar_type_recursive): New function.
2911 * gdbtypes.h (is_scalar_type_recursive): Declare.
2912 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
2913 handle regions when ranged watchpoints are available.
2914 (create_watchpoint_request): New function.
2915 (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
2916 create_watchpoint_request.
2917 * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
2918 (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
2919 `set powerpc' and `show powerpc' commands.
2920 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
2921 Mention documentation comment in the target macro.
2922 (target_region_ok_for_hw_watchpoint): Document return value.
2924 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2926 * breakpoint.c (update_watchpoint): Decide on using a software or
2927 hardware watchpoint after the bp_locations are created.
2929 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2931 Convert hardware watchpoints to use breakpoint_ops.
2932 * breakpoint.h (breakpoint_ops) <insert>: Rename to...
2933 <insert_location>: ... this. Return int instead of void.
2934 Accept pointer to struct bp_location instead of pointer to
2935 struct breakpoint. Adapt all implementations.
2936 (breakpoint_ops) <remove>: Rename to...
2937 <remove_location>: ... this. Accept pointer to struct bp_location
2938 instead of pointer to struct breakpoint. Adapt all implementations.
2939 * breakpoint.c (insert_catchpoint): Delete function.
2940 (insert_bp_location): Call the watchpoint or catchpoint's
2941 breakpoint_ops.insert method.
2942 (remove_breakpoint_1): Call the watchpoint or catchpoint's
2943 breakpoint_ops.remove method.
2944 (insert_watchpoint, remove_watchpoint): New functions.
2945 (watchpoint_breakpoint_ops): New structure.
2946 (watch_command_1): Initialize the OPS field.
2947 * inf-child.c (inf_child_insert_fork_catchpoint)
2948 (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
2949 (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
2950 (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
2952 (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
2953 to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
2954 to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
2955 to_remove_exec_catchpoint and to_set_syscall_catchpoint.
2956 * target.c (update_current_target): Change default implementation of
2957 to_insert_fork_catchpoint, to_remove_fork_catchpoint,
2958 to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
2959 to_insert_exec_catchpoint, to_remove_exec_catchpoint and
2960 to_set_syscall_catchpoint to return_one.
2961 (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
2962 (debug_to_insert_exec_catchpoint): Report return value.
2963 * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
2964 (to_insert_exec_catchpoint): Change declaration to return int instead
2967 2011-01-11 Michael Snyder <msnyder@vmware.com>
2969 * arm-tdep.c: Internationalization.
2972 * fork-child.c: Ditto.
2973 * nto-procfs.c: Ditto.
2974 * ppc-sysv-tdep.c: Ditto.
2976 * remote-mips.c: Ditto.
2978 * rs6000-nat.c: Ditto.
2979 * rs6000-tdep.c: Ditto.
2983 * xml-support.c: Ditto.
2984 * mi/mi-cmd-break.c: Ditto.
2985 * mi/mi-cmd-var.c: Ditto.
2986 * mi/mi-interp.c: Ditto.
2987 * mi/mi-main.c: Ditto.
2989 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
2991 * remote-sim.c (gdbsim_store_register): Update API to
2992 sim_store_register to check more error conditions.
2994 2011-01-10 Michael Snyder <msnyder@vmware.com>
2996 * nto-procfs.c: Comment cleanup, mostly periods and spaces.
2997 * nto-tdep.c: Ditto.
2998 * nto-tdep.h: Ditto.
2999 * objc-exp.y: Ditto.
3000 * objc-lang.c: Ditto.
3001 * objfiles.c: Ditto.
3002 * objfiles.h: Ditto.
3003 * observer.c: Ditto.
3004 * opencl-lang.c: Ditto.
3007 * parser-defs.h: Ditto.
3010 * posix-hdep.c: Ditto.
3011 * ppcbug-rom.c: Ditto.
3012 * ppc-linux-nat.c: Ditto.
3013 * ppc-linux-tdep.c: Ditto.
3014 * ppc-linux-tdep.h: Ditto.
3015 * ppcnbsd-tdep.c: Ditto.
3016 * ppcobsd-tdep.c: Ditto.
3017 * ppcobsd-tdep.h: Ditto.
3018 * ppc-sysv-tdep.c: Ditto.
3019 * ppc-tdep.h: Ditto.
3020 * printcmd.c: Ditto.
3021 * proc-abi.c: Ditto.
3022 * proc-flags.c: Ditto.
3024 * proc-utils.h: Ditto.
3025 * progspace.h: Ditto.
3026 * prologue-value.c: Ditto.
3027 * prologue-value.h: Ditto.
3028 * psympriv.h: Ditto.
3030 * p-typeprint.c: Ditto.
3031 * p-valprint.c: Ditto.
3032 * ravenscar-sparc-thread.c: Ditto.
3033 * ravenscar-thread.c: Ditto.
3034 * ravenscar-thread.h: Ditto.
3036 * regcache.c: Ditto.
3037 * regcache.h: Ditto.
3039 * remote-fileio.c: Ditto.
3040 * remote-fileio.h: Ditto.
3042 * remote-m32r-sdi.c: Ditto.
3043 * remote-mips.c: Ditto.
3044 * remote-sim.c: Ditto.
3045 * rs6000-aix-tdep.c: Ditto.
3046 * rs6000-nat.c: Ditto.
3047 * rs6000-tdep.c: Ditto.
3049 2011-01-10 Michael Snyder <msnyder@vmware.com>
3051 * charset.c (validate): Internationalization.
3052 * coffread.c (read_one_sym): Ditto.
3053 * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
3054 * h8300-tdep.c (H8300_extract_return_value): Ditto.
3055 * inflow.c (new_tty): Ditto.
3056 * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
3057 * m32c-tdep.c (m32c_return_value): Ditto.
3058 * mep-tdep.c (mep_store_return_value): Ditto.
3059 * score-tdep.c (score7_fetch_insn): Ditto.
3060 * ser-mingw.c (pipe_windows_open): Ditto.
3061 * sh64-tdep.c (sh64_extract_return_value): Ditto.
3062 * spu-tdep.c (spu_register_type): Ditto.
3063 * tracepoint.c (trace_find_command): Ditto.
3064 * valarith.c (value_pos): Ditto.
3066 2011-01-10 Joel Brobecker <brobecker@adacore.com>
3068 * ada-valprint.c (printstr): Minor comment reformatting.
3070 2011-01-08 Michael Snyder <msnyder@vmware.com>
3072 * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
3075 2011-01-08 Michael Snyder <msnyder@vmware.com>
3077 * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
3078 * hppa-hpux-tdep.c: Ditto.
3079 * hppa-linux-nat.c: Ditto.
3080 * hppa-linux-tdep.c: Ditto.
3081 * hppanbsd-tdep.c: Ditto.
3082 * hppa-tdep.c: Ditto.
3083 * hppa-tdep.h: Ditto.
3084 * hpux-thread.c: Ditto.
3085 * i386-cygwin-tdep.c: Ditto.
3086 * i386-darwin-nat.c: Ditto.
3087 * i386gnu-nat.c: Ditto.
3088 * i386-linux-nat.c: Ditto.
3089 * i386-linux-tdep.c: Ditto.
3090 * i386-nat.c: Ditto.
3091 * i386-nat.h: Ditto.
3092 * i386nbsd-tdep.c: Ditto.
3093 * i386-sol2-nat.c: Ditto.
3094 * i386-stub.c: Ditto.
3095 * i386-tdep.c: Ditto.
3096 * i386-tdep.h: Ditto.
3097 * i387-tdep.c: Ditto.
3098 * ia64-linux-nat.c: Ditto.
3099 * ia64-linux-tdep.c: Ditto.
3100 * ia64-tdep.c: Ditto.
3104 * inferior.c: Ditto.
3105 * inferior.h: Ditto.
3111 * iq2000-tdep.c: Ditto.
3112 * irix5-nat.c: Ditto.
3118 * jv-typeprint.c: Ditto.
3119 * jv-valprint.c: Ditto.
3120 * language.c: Ditto.
3121 * language.h: Ditto.
3122 * linespec.c: Ditto.
3123 * linux-fork.c: Ditto.
3124 * linux-nat.c: Ditto.
3125 * linux-thread-db.c: Ditto.
3126 * lm32-tdep.c: Ditto.
3128 2011-01-08 Michael Snyder <msnyder@vmware.com>
3130 * m2-exp.y: Comment cleanup, mostly periods and spaces.
3132 * m2-typeprint.c: Ditto.
3133 * m2-valprint.c: Ditto.
3134 * m32c-tdep.c: Ditto.
3135 * m32r-linux-nat.c: Ditto.
3136 * m32r-rom.c: Ditto.
3137 * m32r-tdep.c: Ditto.
3138 * m32r-tdep.h: Ditto.
3139 * m68hc11-tdep.c: Ditto.
3140 * m58klinux-nat.c: Ditto.
3141 * m68k-tdep.c: Ditto.
3142 * m88k-tdep.c: Ditto.
3143 * m88k-tdep.h: Ditto.
3144 * machoread.c: Ditto.
3145 * macrocmd.c: Ditto.
3146 * macroexp.c: Ditto.
3147 * macrotab.c: Ditto.
3150 * mdebugread.c: Ditto.
3151 * mdebugread.h: Ditto.
3154 * memory-map.h: Ditto.
3155 * mep-tdep.c: Ditto.
3156 * microblaze-rom.c: Ditto.
3157 * microblaze-tdep.c: Ditto.
3159 * mips-irix-tdep.c: Ditto.
3160 * mips-linux-nat.c: Ditto.
3161 * mips-linux-tdep.c: Ditto.
3162 * mips-linux-tdep.h: Ditto.
3163 * mipsnbsd-nat.c: Ditto.
3164 * mipsnbsd-tdep.c: Ditto.
3165 * mipsread.c: Ditto.
3166 * mips-tdep.c: Ditto.
3167 * mips-tdep.h: Ditto.
3168 * mn10300-linux-tdep.c: Ditto.
3169 * mn10300-tdep.c: Ditto.
3170 * mn10300-tdep.h: Ditto.
3173 * moxie-tdep.c: Ditto.
3174 * moxie-tdep.h: Ditto.
3177 2011-01-08 Mike Frysinger <vapier@gentoo.org>
3179 * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
3181 2011-01-08 Robert Millan <rmh@gnu.org>
3183 * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
3185 2011-01-07 Michael Snyder <msnyder@vmware.com>
3187 * charset.c (_initialize_charset): Fix typo in string.
3189 2011-01-07 Michael Snyder <msnyder@vmware.com>
3191 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
3193 * tui/tui-layout.c (tui_set_layout_for_display_command):
3194 Split line so that operator goes to beginning of line.
3195 * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
3196 assignment out of if statement.
3198 2011-01-07 Michael Snyder <msnyder@vmware.com>
3200 * ada-lang.c: Comment cleanup, mostly periods and spaces.
3201 * ada-lang.h: Ditto.
3202 * ada-tasks.c: Ditto.
3203 * ada-valprint.c: Ditto.
3204 * aix-threads.c: Ditto.
3205 * alpha-linux-nat.c: Ditto.
3206 * alpha-linux-tdep.c: Ditto.
3207 * alpha-mdebug-tdep.c: Ditto.
3208 * alpha-nat.c: Ditto.
3209 * alpha-osf1-tdep.c: Ditto.
3210 * alpha-tdep.c: Ditto.
3211 * alphabsd-nat.c: Ditto.
3212 * alphabsd-tdep.c: Ditto.
3213 * amd64-darwin-tdep.c: Ditto.
3214 * amd64-linux-nat.c: Ditto.
3215 * amd64-linux-tdep.c: Ditto.
3216 * amd64-sol2-tdep.c: Ditto.
3217 * amd64-tdep.c: Ditto.
3218 * amd64-fbsd-tdep.c: Ditto.
3219 * amd64-nbsd-tdep.c: Ditto.
3220 * amd64-obsd-tdep.c: Ditto.
3221 * amd64-linux-nat.c: Ditto.
3222 * amd64-linux-tdep.c: Ditto.
3223 * arm-tdep.c: Ditto.
3224 * arm-tdep.h: Ditto.
3225 * armnbsd-nat.c: Ditto.
3226 * avr-tdep.c: Ditto.
3227 * bfin-tdep.c: Ditto.
3229 * c-typeprintc: Ditto.
3230 * c-valprint.c: Ditto.
3231 * coff-pe-read.h: Ditto.
3232 * coffreead.c: Ditto.
3233 * cris-tdep.c: Ditto.
3235 * darwin-nat-info.c: Ditto.
3236 * darwin-nat.c: Ditto.
3237 * dbug-rom.c: Ditto.
3241 * dec-thread.c: Ditto.
3243 * demangle.c: Ditto.
3244 * dicos-tdep.c: Ditto.
3245 * dictionary.c: Ditto.
3246 * dictionary.h: Ditto.
3247 * dink32-rom.c: Ditto.
3249 * doublest.c: Ditto.
3251 * dummy-frame.c: Ditto.
3252 * dwarf2-frame.c: Ditto.
3253 * dwarf2expr.c: Ditto.
3254 * dwarf2loc.c: Ditto.
3255 * dwarf2read.c: Ditto.
3259 * event-top.h: Ditto.
3260 * exceptions.c: Ditto.
3261 * exceptions.h: Ditto.
3263 * expprint.c: Ditto.
3264 * expression.h: Ditto.
3268 * f-typeprint.c: Ditto.
3269 * f-valprint.c: Ditto.
3270 * fbsd-nat.c: Ditto.
3272 * fork-child.c: Ditto.
3275 * frv-linux-tdep.c: Ditto.
3276 * frv-tdep.c: Ditto.
3278 * gdb-stabs.h: Ditto.
3279 * gdb_assert.h: Ditto.
3280 * gdb_string.h: Ditto.
3281 * gdb_thread_db.h: Ditto.
3282 * gdb_wait.h: Ditto.
3283 * gdbarch.sh: Ditto.
3285 * gdbthread.h: Ditto.
3286 * gdbtypes.c: Ditto.
3287 * gdbtypes.h: Ditto.
3290 * gnu-v2-abi.c: Ditto.
3291 * gnu-v3-abi.c: Ditto.
3292 * go32-nat.c: Ditto.
3293 * gdbarch.c: Regenerate.
3294 * gdbarch.h: Regenerate.
3296 2011-01-07 Michael Snyder <msnyder@vmware.com>
3298 * ax-gdb.c: Adjust some long output strings.
3299 * breakpoint.c: Ditto.
3304 * linux-nat.c: Ditto.
3305 * solib-pa64.c: Ditto.
3306 * solib-som.c: Ditto.
3308 2011-01-06 Tom Tromey <tromey@redhat.com>
3312 * python/python.c (GdbMethods): Add "newest_frame" method.
3313 * python/python-internal.h (gdbpy_newest_frame): Declare.
3314 * python/py-frame.c (gdbpy_newest_frame): New function.
3316 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com>
3318 * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
3319 * jit.c (jit_debug): New variable.
3320 (show_jit_debug): New function.
3321 (struct target_buffer): Use ULONGEST.
3322 (bfd_open_from_target_memory): Likewise.
3323 (jit_register_code, jit_inferior_init): Add debug output.
3324 (_initialize_jit): Register "debug jit" command.
3326 2011-01-06 Tom Tromey <tromey@redhat.com>
3328 * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
3329 * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
3332 2011-01-06 Tom Tromey <tromey@redhat.com>
3334 * python/py-frame.c (frapy_block): Use get_frame_block.
3336 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3338 Do not stop on SIGPRIO signals by default
3339 * infrun.c (_initialize_infrun): Unset signal_stop and
3340 signal_print for TARGET_SIGNAL_PRIO.
3342 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3344 * ada-tasks.c: Fix style violation in comment.
3346 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3348 * linespec.c (decode_compound, find_method): Remove trailing \n
3349 at end of error string.
3350 * solib-irix.c (irix_current_sos): Likewise.
3351 * varobj.c (uninstall_variable): Likewise.
3353 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3355 * copyright.py: New script.
3356 * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
3357 Launch emacs without exec'ing. Call copyright.py afterwards.
3359 2011-01-05 Michael Snyder <msnyder@vmware.com>
3361 * addrmap.c: Shorten lines of >= 80 columns.
3362 * arch-utils.c: Ditto.
3363 * arch-utils.h: Ditto.
3365 * ax-general.c: Ditto.
3367 * blockframe.c: Ditto.
3368 * breakpoint.c: Ditto.
3369 * buildsym.c: Ditto.
3371 * c-typeprint.c: Ditto.
3373 * coffread.c: Ditto.
3377 * cp-namespace.c: Ditto.
3378 * cp-support.c: Ditto.
3379 * dbug-rom.c: Ditto.
3384 * dictionary.c: Ditto.
3386 * doublest.c: Ditto.
3387 * dwarf2-frame.c: Ditto.
3388 * dwarf2expr.c: Ditto.
3389 * dwarf2loc.c: Ditto.
3390 * dwarf2read.c: Ditto.
3393 * event-loop.c: Ditto.
3394 * event-loop.h: Ditto.
3395 * exceptions.h: Ditto.
3397 * expprint.c: Ditto.
3398 * expression.h: Ditto.
3400 * f-valprint.c: Ditto.
3402 * frame-base.c: Ditto.
3403 * frame-unwind.c: Ditto.
3404 * frame-unwind.h: Ditto.
3408 * gdb-stabs.h: Ditto.
3409 * gdb_assert.h: Ditto.
3410 * gdb_dirent.h: Ditto.
3411 * gdb_obstack.h: Ditto.
3413 * gdbtypes.c: Ditto.
3414 * gdbtypes.h: Ditto.
3415 * inf-ttrace.c: Ditto.
3420 * inline-frame.h: Ditto.
3421 * language.c: Ditto.
3422 * language.h: Ditto.
3423 * libunwind-frame.c: Ditto.
3424 * libunwind-frame.h: Ditto.
3425 * linespec.c: Ditto.
3426 * linux-nat.c: Ditto.
3427 * linux-nat.h: Ditto.
3428 * linux-thread-db.c: Ditto.
3429 * machoread.c: Ditto.
3430 * macroexp.c: Ditto.
3431 * macrotab.c: Ditto.
3434 * mdebugread.c: Ditto.
3439 * objfiles.c: Ditto.
3440 * objfiles.h: Ditto.
3442 * p-typeprint.c: Ditto.
3443 * p-valprint.c: Ditto.
3445 * printcmd.c: Ditto.
3446 * proc-events.c: Ditto.
3448 * progspace.c: Ditto.
3449 * progspace.h: Ditto.
3450 * psympriv.h: Ditto.
3453 * regcache.c: Ditto.
3454 * regcache.h: Ditto.
3455 * remote-fileio.c: Ditto.
3457 * ser-mingw.c: Ditto.
3459 * ser-unix.c: Ditto.
3462 * solib-frv.c: Ditto.
3463 * solib-irix.c: Ditto.
3464 * solib-osf.c: Ditto.
3465 * solib-pa64.c: Ditto.
3466 * solib-som.c: Ditto.
3467 * solib-sunos.c: Ditto.
3468 * solib-svr4.c: Ditto.
3469 * solib-target.c: Ditto.
3473 * stabsread.c: Ditto.
3474 * stabsread.c: Ditto.
3477 * symfile-mem.c: Ditto.
3483 * target-descriptions.c: Ditto.
3484 * target-memory.c: Ditto.
3487 * terminal.h: Ditto.
3490 * tracepoint.c: Ditto.
3491 * tracepoint.h: Ditto.
3495 * user-regs.c: Ditto.
3496 * user-regs.h: Ditto.
3498 * valarith.c: Ditto.
3500 * valprint.c: Ditto.
3501 * valprint.h: Ditto.
3506 * xcoffread.c: Ditto.
3507 * xcoffsolib.c: Ditto.
3508 * xcoffsolib.h: Ditto.
3509 * xml-syscall.c: Ditto.
3510 * xml-tdesc.c: Ditto.
3512 2011-01-05 Michael Snyder <msnyder@vmware.com>
3514 * cli/cli-cmds.c: Shorten lines of >= 80 columns.
3515 * cli/cli-decode.c: Ditto.
3516 * cli/cli-dump.c: Ditto.
3517 * cli/cli-logging.c: Ditto.
3518 * cli/cli-script.c: Ditto.
3519 * cli/cli-setshow.c: Ditto.
3520 * common/signals.c: Ditto.
3521 * mi/mi-cmd-break.c: Ditto.
3522 * mi/mi-cmd-disas.c: Ditto.
3523 * mi/mi-cmd-stack.c: Ditto.
3524 * mi/mi-cmd-var.c: Ditto.
3525 * mi/mi-cmds.c: Ditto.
3526 * mi/mi-common.h: Ditto.
3527 * mi/mi-console.c: Ditto.
3528 * mi/mi-interp.c: Ditto.
3529 * mi/mi-main.c: Ditto.
3530 * osf-share/cma_attr.c: Ditto.
3531 * osf-share/cma_deb_core.h: Ditto.
3532 * osf-share/cma_debug_client.h: Ditto.
3533 * osf-share/cma_handle.h: Ditto.
3534 * osf-share/cma_mutex.h: Ditto.
3535 * osf-share/cma_stack_int.h: Ditto.
3536 * osf-share/cma_tcb_defs.h: Ditto.
3537 * python/py-auto-load.c: Ditto.
3538 * python/py-breakpoint.c: Ditto.
3539 * python/py-cmd.c: Ditto.
3540 * python/py-frame.c: Ditto.
3541 * python/py-objfile.c: Ditto.
3542 * python/py-param.c: Ditto.
3543 * python/py-progspace.c: Ditto.
3544 * python/py-symbol.c: Ditto.
3545 * python/py-value.c: Ditto.
3546 * python/python-internal.h: Ditto.
3547 * python/python.c: Ditto.
3548 * tui/tui-data.c: Ditto.
3549 * tui/tui-disasm.c: Ditto.
3550 * tui/tui-hooks.c: Ditto.
3551 * tui/tui-io.c: Ditto.
3552 * tui/tui-layout.c: Ditto.
3553 * tui/tui-regs.c: Ditto.
3554 * tui/tui-source.c: Ditto.
3555 * tui/tui-stack.c: Ditto.
3556 * tui/tui-win.c: Ditto.
3557 * tui/tui-windata.c: Ditto.
3558 * tui/tui-winsource.c: Ditto.
3560 2011-01-05 Joel Brobecker <brobecker@adacore.com>
3562 * configure.ac, gdb.1: Copyright year update.
3564 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3566 * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
3567 this_pc_in_block, morestack_msym and morestack_name. Check for
3568 "__morestack" minimal symbol there.
3570 2011-01-03 Joel Brobecker <brobecker@adacore.com>
3572 * symfile.c (find_sym_fns): Add call to dont_repeat.
3574 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3576 Copyright year update in most files (performed by copyright.sh).
3578 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3580 * top.c (print_gdb_version): Update copyright year in version output.
3582 For older changes see ChangeLog-2010.
3588 version-control: never