1 2008-05-15 Daniel Jacobowitz <dan@codesourcery.com>
3 * gdbarch.sh: Delete dwarf_reg_to_regnum.
4 * gdbarch.c, gdbarch.h: Regenerated.
5 * amd64-tdep.c, arm-tdep.c, h8300-tdep.c, hppa-linux-tdep.c,
6 hppa-tdep.c, i386-tdep.c, m32c-tdep.c, m68k-tdep.c, mips-tdep.c,
7 s390-tdep.c, xtensa-tdep.c: Do not set dwarf_reg_to_regnum.
9 2008-05-15 Pedro Alves <pedro@codesourcery.com>
11 * linux-nat.c (trap_ptid): Delete.
12 (linux_nat_detach, linux_nat_wait, linux_nat_mourn_inferior):
14 * linux-thread-db.c (thread_db_wait): Adjust.
16 2008-05-15 Joel Brobecker <brobecker@adacore.com>
18 * linespec.c (decode_line_1): Fix a couple of comments.
20 2008-05-15 Alan Modra <amodra@bigpond.net.au>
22 * dbxread.c: Formatting.
23 (INTERNALIZE_SYMBOL): Init n_other.
24 (set_namestring): Take pointer to nlist arg rather than struct
25 copy. Update all callers.
27 2008-05-15 Andreas Schwab <schwab@suse.de>
29 * Makefile.in (dwarf2loc.o): Remove $(addrmap_h).
30 (dwarf2read.o): Add $(addrmap_h).
32 2008-05-14 Ulrich Weigand <uweigand@de.ibm.com>
34 * ppc-linux-tdep.c (ppc_linux_convert_from_func_ptr_addr): Rename ...
35 (ppc64_linux_convert_from_func_ptr_addr): ... to this. No longer try
36 to handle ppc32 PLT entries.
37 (ppc_linux_init_abi): Install ppc64_linux_convert_from_func_ptr_addr
40 2008-05-14 Daniel Jacobowitz <dan@codesourcery.com>
42 * elfread.c (elf_symtab_read): Create trampolines for @plt symbols.
43 * minsyms.c (lookup_minimal_symbol_by_pc_section_1): Renamed from
44 lookup_minimal_symbol_by_pc_section. Prefer trampolines if requested.
45 (lookup_minimal_symbol_by_pc_section): Use
46 lookup_minimal_symbol_by_pc_section_1.
47 (lookup_solib_trampoline_symbol_by_pc): Likewise.
49 2008-05-13 Joel Brobecker <brobecker@adacore.com>
51 * findcmd.c: Add #include "gdb_stdint.h".
52 * Makefile.in (findcmd.o): Update dependencies.
54 2008-05-11 David S. Miller <davem@davemloft.net>
56 * sparc-linux-tdep.c (sparc32_linux_init_abi): Remove
57 long double size override, Linux does use 128-bit now.
59 * sparc-linux-tdep.c (PSR_SYSCALL): Define.
60 (sparc_linux_write_pc): New function.
61 (sparc32_linux_init_abi): Register it.
62 * sparc64-linux-tdep.c (TSTATE_SYSCALL): Define.
63 (sparc64_linux_write_pc): New function.
64 (sparc64_linux_init_abi): Register it.
66 * sparc-linux-tdep.c, sparc64-linux-tdep.c: Use
67 dwarf2_append_unwinders(), not dwarf2_frame_sniffer.
69 2008-05-11 Ulrich Weigand <uweigand@de.ibm.com>
71 * rs6000-tdep.c (rs6000_gdbarch_init): Set up info.target_desc
72 and info.tdep_info before calling gdbarch_init_osabi.
74 2008-05-09 Joel Brobecker <brobecker@adacore.com>
76 * ada-lang.c (ada_evaluate_subexp) [BINOP_ASSIGN]: Do not force
77 the type of the right hand side of the assignment to the type
78 of the left hand side if the left hand side is a convenience
81 2008-05-09 Ulrich Weigand <uweigand@de.ibm.com>
83 * NEWS: Mention gdbserver bi-arch capability.
85 2008-05-09 Doug Evans <dje@google.com>
88 * NEWS: Document find command and qSearch:memory packet.
89 * Makefile.in (SFILES): Add findcmd.c.
90 (COMMON_OBJS): Add findcmd.o.
91 (findcmd.o): New rule.
92 * findcmd.c: New file.
93 * target.h (target_ops): New member to_search_memory.
94 (simple_search_memory): Declare.
95 (target_search_memory): Declare.
96 * target.c (simple_search_memory): New fn.
97 (target_search_memory): New fn.
98 * remote.c (PACKET_qSearch_memory): New packet kind.
99 (remote_search_memory): New fn.
100 (init_remote_ops): Init to_search_memory.
101 (init_extended_remote_ops): Ditto.
102 (_initialize_remote): Add qSearch:memory packet config command.
104 2008-05-09 Eli Zaretskii <eliz@gnu.org>
106 * thread.c (_initialize_thread): Don't use commas and periods in
107 first line of doc string of "set/show print thread-events".
109 2008-05-08 Joel Brobecker <brobecker@adacore.com>
111 * alpha-mdebug-tdep.c, alpha-osf1-tdep.c, alpha-tdep.c:
112 Update for unwinder changes.
114 2008-05-08 Joel Brobecker <brobecker@adacore.com>
116 * frame.c (get_frame_base_address, get_frame_locals_address)
117 (get_frame_args_address): Pass the correct frame when calling
118 frame_base_find_by_frame.
120 2008-05-08 Ulrich Weigand <uweigand@de.ibm.com>
122 * remote.c (extended_remote_attach_1): Call target_find_description.
124 2008-05-08 Daniel Jacobowitz <dan@codesourcery.com>
126 * remote.c (extended_remote_create_inferior_1): Clean up
127 before marking the target running.
129 2008-05-08 Joel Brobecker <brobecker@adacore.com>
131 * hppa-tdep.h, hppa-tdep.c, hppa-hpux-tdep.c: Update for unwinder
134 2008-05-07 Joel Brobecker <brobecker@adacore.com>
136 * sparc-tdep.c, sparc-tdep.h, sparc-sol2-tdep.c, sparc64-tdep.c,
137 sparc64-sol2-tdep.c: Update for unwinder changes.
139 2008-05-07 Daniel Jacobowitz <dan@codesourcery.com>
141 * cp-support.c (mangled_name_to_comp): Initialize storage.
142 (unqualified_name_from_comp): Likewise.
144 2008-05-07 Jie Zhang <jie.zhang@analog.com>
146 * remote.c (remote_insert_breakpoint): Call get_remote_state
147 after gdbarch_breakpoint_from_pc is called.
148 (remote_insert_hw_breakpoint): Likewise.
150 2008-05-06 Joel Brobecker <brobecker@adacore.com>
152 * valprint.c (val_print): Add new language parameter and use it
153 instead of using the current_language. Update calls to val_print
155 (common_val_print): Add new langauge parameter and pass it to
157 * value.h (struct language_defn): Add opaque declaration.
158 (val_print, common_val_print): Update declarations.
159 * stack.c (print_frame_args): Update call to common_val_print
160 using the appropriate language.
161 * mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
162 * c-valprint, f-valprint.c, m2-valprint.c, mt-tdep.c, infcmd.c,
163 mi/mi-main.c, jv-valprint.c, ada-valprint.c, varobj.c, p-valprint.c,
164 scm-valprint.c, cp-valprint.c, sh64-tdep.c, printcmd.c:
165 #include "language.h" if necessary.
166 Update calls to val_print and common_val_print.
167 * Makefile.in (mt-tdep.o, sh64-tdep.o, mi-cmds.o, mi-main.o):
170 2008-05-06 Joel Brobecker <brobecker@adacore.com>
172 * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Treat addresses
173 pointing inside a non-executable section as function descriptors.
175 2008-05-06 Pedro Alves <pedro@codesourcery.com>
177 * inf-loop.c (inferior_event_handler): Run all continuations and
178 print any language change before running the breakpoint commands.
180 2008-05-06 Joel Brobecker <brobecker@adacore.com>
182 * frame-unwind.c (frame_unwind_got_bytes): New function.
183 * frame-unwind.h (frame_unwind_got_bytes): Add declaration.
184 * libunwind-frame.h, libunwind-frame.c, ia64-tdep.c: Update
185 for unwinder changes.
187 2008-05-05 Doug Evans <dje@google.com>
189 * NEWS: Mention new /m modifier for disassemble command.
190 * cli/cli-cmds.c (print_disassembly): New function.
191 (disassemble_current_function): New function
192 (disassemble_command): Recognize /m modifier, print mixed
194 (init_cli_cmds): Update disassemble help text.
196 2008-05-05 Maxim Grigoriev <maxim2405@gmail.com>
198 * xtensa-tdep.c: Update for unwinder changes.
200 2008-05-05 Andreas Schwab <schwab@suse.de>
202 Update m68k port for unwinder changes.
203 * m68k-tdep.c (m68k_frame_cache): Expect this_frame.
204 (m68k_frame_this_id, m68k_frame_prev_register): Update signature.
205 (m68k_frame_unwind): Use default_frame_sniffer.
206 (m68k_frame_sniffer): Remove.
207 (m68k_frame_base_address): Expect this_frame.
208 (m68k_dummy_id): Renamed from m68k_unwind_dummy_id. Expect
210 (m68k_gdbarch_init): Use set_gdbarch_dummy_id,
211 dwarf2_append_unwinders, and frame_unwind_append_unwinder.
212 * m68klinux-tdep.c (m68k_linux_pc_in_sigtramp): Expect frame_info
213 parameter instead of pc value.
214 (m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
216 (m68k_linux_sigtramp_frame_this_id)
217 (m68k_linux_sigtramp_frame_prev_register)
218 (m68k_linux_sigtramp_frame_sniffer): Update signature.
219 (m68k_linux_sigtramp_frame_unwind): Use
220 m68k_linux_sigtramp_frame_sniffer.
221 (m68k_linux_init_abi): Use frame_unwind_append_unwinder.
223 * m68klinux-nat.c (store_register): Fix typo.
225 2008-05-05 Pedro Alves <pedro@codesourcery.com>
227 * infcmd.c (step_1): Put thread id on the stack to avoid possible
230 2008-05-05 Luis Machado <luisgpm@br.ibm.com>
232 * symfile.c (reread_symbols): Update objfile's entry point.
234 2008-05-05 Aleksandar Ristovski <aristovski@qnx.com>
235 Joel Brobecker <brobecker@adacore.com>
237 * ada-lang.c: Update throughout to use symbol_matches_domain
238 instead of matching the symbol domain explictly.
239 * dwarf2read.c (add_partial_symbol): Do not add new psym for
240 STRUCT_DOMAIN. Make sure you recognize c++ struct and java and ada
241 class as typedefs. See lookup_partial_symbol function.
242 (new_symbol): Similar to add_partial_symbol, do not create
243 symbol for the typedef. See lookup_block_symbol.
244 * symtab.c (symbol_matches_domain): New function, takes care
245 of dual meaning of STRUCT_DOMAIN symbol for c++, ada and java.
246 (lookup_partial_symbol): Use symbol_matches_domain to see if the
247 found psym domain matches the given domain.
248 (lookup_block_symbol): Likewise.
250 2008-05-05 Vladimir Prus <vladimir@codesourcery.com>
252 * top.c (command_line_handler_continuation): Remove.
253 (execute_command): Do not install the above.
255 2008-05-05 Vladimir Prus <vladimir@codesourcery.com>
257 * inf-loop.c (inferior_event_handler): Call bpstat_do_action,
258 and catch all exceptions from it.
259 * top.c (command_line_handler_continuation): Don't
260 call bpstat_do_action here.
262 2008-05-04 Daniel Jacobowitz <dan@codesourcery.com>
264 * dwarf2read.c (struct dwarf2_cu): Add type_hash.
265 (struct die_info): Remove type.
266 (read_type_die, read_typedef, read_base_type, read_subrange_type)
267 (read_structure_type, read_enumeration_type, read_array_type)
268 (read_tag_pointer_type, read_tag_ptr_to_member_type)
269 (read_tag_reference_type, read_tag_const_type, read_tag_volatile_type)
270 (read_tag_string_type, read_subroutine_type, read_set_type)
271 (read_unspecified_type): Delete prototypes. Remove check for
272 already-loaded type. Return the new type.
273 (set_die_type): Return the new type.
274 (reset_die_and_siblings_types): Delete.
275 (load_comp_unit, load_full_comp_unit): Set type_hash.
276 (process_queue): Remove call to reset_die_and_siblings_types.
277 (process_die): Do not read most types here. Use read_type_die
279 (read_func_scope, dwarf2_add_member_fn): Use read_type_die.
280 (quirk_gcc_member_function_pointer): Return the new type.
281 (process_structure_scope, process_enumeration_scope): Use
282 get_die_type and read the DIE's type.
283 (read_full_die): Do not initialize die->type.
284 (tag_type_to_type): Use read_type_die.
285 (read_type_die): Check for already defined types. Return the
287 (determine_prefix): Use get_die_type.
288 (set_die_type): Return the type.
289 (get_die_type): Take a CU argument. Check for no type_hash.
291 2008-05-04 Daniel Jacobowitz <dan@codesourcery.com>
293 * dwarf2read.c (dwarf2_ranges_read, read_partial_die): Initialize
296 2008-05-04 Pedro Alves <pedro@codesourcery.com>
298 * breakpoint.c (update_breakpoints_after_exec): Delete bp_longjmp
299 and bp_longjmp_resume breakpoints.
300 (breakpoint_address_is_meaningful): Claim bp_longjmp_resume as
302 (create_longjmp_breakpoint): Don't create bp_longjmp_resume
303 breakpoints. Create bp_longjmp breakpoints as momentary
305 (enable_longjmp_breakpoint): Delete.
306 (set_longjmp_breakpoint): New.
307 (disable_longjmp_breakpoint): Delete.
308 (delete_longjmp_breakpoint): New.
309 (set_longjmp_resume_breakpoint): Delete.
310 (set_momentary_breakpoint_at_pc): New.
311 (breakpoint_re_set_one): Don't delete bp_longjmp and
312 bp_longjmp_resume breakpoints.
313 (breakpoint_re_set): Don't create longjmp and longjmp-resume
316 * infrun.c (step_resume_breakpoint): Add comment.
317 (struct execution_control_state): Delete handling_longjmp member.
318 (init_execution_control_state). Don't clear handling_longjmp.
319 (context_switch): Don't context switch handling_longjmp.
320 (handle_inferior_event): If handling a bp_longjmp breakpoint,
321 create a bp_longjmp_resume breakpoint, and set it as current
322 step_resume_breakpoint, then step over the longjmp breakpoint. If
323 handling a bp_longjmp_resume breakpoint, don't delete the longjmp
324 breakpoint, delete the longjmp-resume breakpoint, and stop
326 (currently_stepping): Remove handling_longjmp from expression.
327 (insert_step_resume_breakpoint_at_sal): Update comment.
328 (insert_longjmp_resume_breakpoint): New.
330 * breakpoint.h (set_momentary_breakpoint_at_pc): Declare.
331 (enable_longjmp_breakpoint, disable_longjmp_breakpoint): Delete
333 (set_longjmp_breakpoint, delete_longjmp_breakpoint): Declare.
334 (set_longjmp_resume_breakpoint): Delete declaration.
336 * gdbthread.h (save_infrun_state): Remove handling_longjmp
338 (load_infrun_state): Delete *handling_longjmp parameter.
339 * thread.c (save_infrun_state): Remove handling_longjmp parameter.
341 (load_infrun_state): Delete *handling_longjmp parameter. Update
344 * infcmd.c (disable_longjmp_breakpoint_cleanup): Delete.
345 (delete_longjmp_breakpoint_cleanup): New.
346 (step_1): Call set_longjmp_breakpoint instead of
347 enable_longjmp_breakpoint. Use delete_longjmp_breakpoint_cleanup
348 instead of disable_longjmp_breakpoint_cleanup when making cleanup.
349 (step_1_continuation): Pass thread id in the continuation args to
351 (step_once): Add thread parameter. Pass thread id the the
354 2008-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
356 Set CU BASE_ADDRESS already from partial DIEs.
357 * dwarf2read.c (read_partial_die): New variables BASE_ADDRESS and
358 BASE_ADDRESS_TYPE. Set these variables from DW_AT_LOW_PC and
359 DW_AT_ENTRY_PC. Set CU->HEADER.BASE_KNOWN and CU->HEADER.BASE_ADDRESS
360 from these variables if it was still unset.
362 * Makefile.in: Update dependencies.
363 * dwarf2read.c: Include "addrmap.h"
364 (struct dwarf2_cu): New fields RANGES_OFFSET and HAS_RANGES_OFFSET.
365 (dwarf2_ranges_read): New prototype.
366 (dwarf2_build_psymtabs_hard): Initialize and prepare PSYMTABS_ADDRMAP.
367 Add discontiguous range to PSYMTABS_ADDRMAP by DWARF2_RANGES_READ on
368 HAS_RANGES_OFFSET, otherwise add there the contiguous range.
369 (dwarf2_ranges_read): New parameter RANGES_PST, update the function
370 comment for it. Add the found ranges to RANGES_PST. New variable
371 BASEADDR, initialize it the common way.
372 (dwarf2_get_pc_bounds): Update the caller for the new parameter.
373 (read_partial_die): `DW_AT_ranges' now only sets RANGES_OFFSET and
374 HAS_RANGES_OFFSET for the later processing.
375 * objfiles.h (struct objfile): New field PSYMTABS_ADDRMAP.
376 * symtab.c: Include "addrmap.h"
377 (find_pc_sect_psymtab): Support reading the field PSYMTABS_ADDRMAP.
378 Move the psymtab locator into ...
379 (find_pc_sect_psymtab_closer): ... a new function.
381 2008-05-04 Ulrich Weigand <uweigand@de.ibm.com>
383 * arch-utils.c (gdbarch_update_p): Use default values for
384 info.abfd and info.target_desc if they are NULL.
385 (gdbarch_from_bfd): Remove assertion.
386 (set_gdbarch_from_file): Call gdbarch_find_by_info directly,
387 using the current target description.
388 (gdbarch_info_fill): Do not use default values for info->abfd
389 and info->target_desc.
391 2008-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
393 * symfile.c (reread_symbols): Reload EXEC_BFD on its change.
395 2008-05-04 Ulrich Weigand <uweigand@de.ibm.com>
397 * inferior.h (read_pc_pid, write_pc_pid): Remove.
398 * regcache.h (regcache_read_pc, regcache_write_pc): Add prototypes.
400 * regcache.c (read_pc_pid): Remove, replace by ...
401 (regcache_read_pc): ... this function.
402 (write_pc_pid): Remove, replace by ...
403 (regcache_write_pc): ... this function.
404 (read_pc, write_pc): Update.
406 * infrun.c (displaced_step_prepare): Replace read_pc_pid and
407 write_pc_pid by regcache_read_pc and regcache_write_pc.
408 (displaced_step_fixup): Likewise.
409 (resume): Likewise. Use regcache arch instead of current_gdbarch.
410 (prepare_to_proceed): Likewise.
412 (adjust_pc_after_break): Likewise.
413 (handle_inferior_event): Likewise.
415 * linux-nat.c (cancel_breakpoint): Likewise.
416 * linux-thread-db.c (check_event): Likewise.
417 * aix-thread.c (aix_thread_wait): Likewise.
418 * tracepoint.c (trace_dump_command): Likewise.
420 2008-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
422 * dwarf2loc.c (dwarf_expr_frame_base): Error out on missing
423 SYMBOL_LOCATION_BATON.
425 2008-05-04 Vladimir Prus <vladimir@codesourcery.com>
427 * target.h (struct target_ops): New field to_auxv_parse.
428 * auxv.c (default_auxv_parse): New, renamed from previous
430 (target_auxv_parse): Try to call target method. Fallback to
431 default_auxv_parse if not found.
432 * procfs.c (procfs_auxv_parse): New.
433 (init_procfs_ops): On Solaris, in 64-bit mode, install
436 2008-05-03 Adam Nemet <anemet@caviumnetworks.com>
438 * symfile.c (add_symbol_file_command): Use paddress rather than
439 hex_string to print the address.
441 2008-05-03 Ulrich Weigand <uweigand@de.ibm.com>
443 * rs6000-tdep.c (rs6000_frame_this_id): If info->base is 0,
444 return the null frame ID to terminate the backtrace.
446 2008-05-03 Ulrich Weigand <uweigand@de.ibm.com>
448 * rs6000-tdep.c: Do not include "rs6000-tdep.h".
449 (rs6000_find_toc_address_hook): Move to rs6000-aix-tdep.c.
450 (SIG_FRAME_PC_OFFSET): Likewise.
451 (SIG_FRAME_LR_OFFSET): Likewise.
452 (SIG_FRAME_FP_OFFSET): Likewise.
453 (rs6000_push_dummy_call): Likewise.
454 (rs6000_return_value): Likewise.
455 (rs6000_convert_from_func_ptr_addr): Likewise.
456 (branch_dest, rs6000_software_single_step): Likewise.
457 (deal_with_atomic_sequence): Rename to ...
458 (ppc_deal_with_atomic_sequence): ... this. Adapt all callers.
459 Do not call branch_dest; inline required parts of that function.
460 (rs6000_skip_trampoline_code): Replace DEPRECATED_SYMBOL_NAME
461 with SYMBOL_LINKAGE_NAME.
462 (struct reg, regsize): Delete.
463 (read_memory_addr): Delete; inline into callers.
464 (rs6000_skip_prologue): Move after skip_prologue.
465 (skip_prologue): Remove prototype.
466 (rs6000_gdbarch_init): Remove sysv_abi variable; perform all
467 initialization as if this variable were true. Do not install
468 ppc64_sysv_abi_adjust_breakpoint_address.
470 * rs6000-aix-tdep.c: Include "gdb_assert.h", "gdbtypes.h",
471 "gdbcore.h", "target.h", "value.h", "infcall.h", "objfiles.h",
473 (rs6000_find_toc_address_hook): Move here from rs6000-tdep.c.
474 (SIG_FRAME_PC_OFFSET): Likewise.
475 (SIG_FRAME_LR_OFFSET): Likewise.
476 (SIG_FRAME_FP_OFFSET): Likewise.
477 (rs6000_push_dummy_call): Likewise.
478 (rs6000_return_value): Likewise.
479 (rs6000_convert_from_func_ptr_addr): Likewise.
480 (branch_dest, rs6000_software_single_step): Likewise. Replace
481 tdep->text_segment_base by AIX_TEXT_SEGMENT_BASE.
482 (rs6000_aix_init_osabi): Install rs6000_push_dummy_call,
483 rs6000_return_value, and rs6000_convert_from_func_ptr_addr.
484 Call set_gdbarch_long_double_bit and set_gdbarch_frame_red_zone_size.
485 Set tdep->lr_frame_offset. Do not set tdep->text_segment_base.
487 * rs6000-tdep.h (rs6000_software_single_step): Remove prototype.
488 (AIX_TEXT_SEGMENT_BASE): New macro.
489 * rs6000-nat.c (exec_one_dummy_insn): Replace tdep->text_segment_base
490 by AIX_TEXT_SEGMENT_BASE.
492 * ppc-tdep.h (ppc_deal_with_atomic_sequence): Add prototype.
493 (struct gdbarch_tdep): Remove text_segment_base member.
494 * ppc-linux-tdep.c (ppc_linux_init_abi): On 64-bit, install
495 ppc64_sysv_abi_adjust_breakpoint_address.
497 * Makefile.in (rs6000-tdep.o): Update dependencies.
498 (rs6000-aix-tdep.o): Likewise.
500 2008-05-03 Luis Machado <luisgpm@br.ibm.com>
501 Thiago Jung Bauermann <bauerman@br.ibm.com>
503 * cli/cli-decode.c (lookup_cmd_1): Fix indentation.
504 * doublest.c (convert_typed_floating): Fix typo in comment.
505 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
506 * frame-unwind.h (frame_sniffer_ftype): Likewise.
507 * frame.c (frame_unwind_address_in_block): Likewise.
508 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Likewise.
509 * symtab.h (struct symbol): Likewise.
510 * tramp-frame.h (struct trad_frame_cache): Likewise.
511 * value.c (allocate_repeat_value): Likewise.
513 2008-05-03 Ulrich Weigand <uweigand@de.ibm.com>
515 * infrun.c (handle_inferior_event): Do not insert breakpoints at
516 TARGET_WAITKIND_LOADED events during startup (i.e. in the shell).
518 2008-05-03 Pedro Alves <pedro@codesourcery.com>
520 * parse.c (parse_exp_in_context): Don't override
521 expression_context_pc if get_selected_block returned a valid
524 2008-05-03 Daniel Jacobowitz <dan@codesourcery.com>
526 * alpha-tdep.h (ALPHA_REGISTER_BYTES): Delete.
527 * arm-tdep.h (STATUS_REGISTER_SIZE): Delete.
528 * breakpoint.c (args_for_catchpoint_enable, current_exception_event):
530 * c-typeprint.c (c_type_print_base): Delete handling of template
532 * cp-support.h (METHOD_PTR_IS_VIRTUAL, METHOD_PTR_FROM_VOFFSET)
533 (METHOD_PTR_TO_VOFFSET): Delete.
534 * defs.h (QUIT_FIXME): Delete.
535 * f-lang.h (DEFAULT_DOTMAIN_NAME_IN_MF77, DEFAULT_MAIN_NAME_IN_MF77)
536 (DEFAULT_DOTMAIN_NAME_IN_XLF_BUGGY, DEFAULT_DOTMAIN_NAME_IN_XLF): Delete.
537 * gdbtypes.h (struct cplus_struct_type): Delete is_inlined,
538 ninstantiations, and instantiations.
539 (TYPE_INSTANTIATIONS, TYPE_NINSTANTIATIONS, TYPE_INSTANTIATION)
540 (TYPE_FN_FIELD_INLINED): Delete.
541 * srec.h (SREC_BINARY): Delete.
542 * symtab.c (symbol_init_demangled_name): Delete.
543 * symtab.h (SYMBOL_INIT_DEMANGLED_NAME, symbol_init_demangled_name)
544 (SYMBOL_OBJFILE, struct exception_event_record, CURRENT_EXCEPTION_KIND)
545 (CURRENT_EXCEPTION_CATCH_SAL, CURRENT_EXCEPTION_CATCH_LINE)
546 (CURRENT_EXCEPTION_CATCH_FILE, CURRENT_EXCEPTION_CATCH_PC)
547 (CURRENT_EXCEPTION_THROW_SAL, CURRENT_EXCEPTION_THROW_LINE)
548 (CURRENT_EXCEPTION_THROW_FILE, CURRENT_EXCEPTION_THROW_PC): Delete.
549 * target.h (enum thread_control_capabilities): Delete tc_switch.
550 (target_can_switch_threads): Delete.
552 2008-05-03 Daniel Jacobowitz <dan@codesourcery.com>
554 * Makefile.in (objfiles.o): Update.
555 * exec.c (exec_set_section_address): Support p->addr != 0.
556 * objfiles.c (objfile_relocate): Update exec_ops section
558 * symfile.c (place_section): Move exec_set_section_address call...
559 (default_symfile_offsets): ...to here.
561 2008-05-03 Ulrich Weigand <uweigand@de.ibm.com>
563 * Makefile.in (ppc_linux_tdep_h): New macro.
564 (powerpc_32l_c, powerpc_altivec32_c, powerpc_altivec32l_c): Likewise.
565 (powerpc_64l_c, powerpc_altivec64_c, powerpc_altivec64l_c): Likewise.
566 (powerpc_e500l_c): Likewise.
567 (ppc-linux-nat.o): Update dependencies.
568 (ppc-linux-tdep.o): Update dependencies.
569 (rs6000-tdep.o): Update dependencies.
571 * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Remove.
572 (ppc_linux_svr4_fetch_link_map_offsets): Remove.
573 (ppc_linux_gregset, ppc_linux_fpregset): Move to ppc-linux-tdep.h
574 (ppc_supply_reg, ppc_collect_reg): Add prototypes.
575 (tdesc_powerpc_e500): Remove.
577 * rs6000.c: Include "features/rs6000/powerpc-altivec32.c"
578 and "features/rs6000/powerpc-altivec64.c".
579 (ppc_supply_reg, ppc_collect_reg): Make global.
580 (variants): Use tdesc_powerpc_32 for "powerpc" and
581 tdesc_powerpc_altivec64 for "powerpc64".
582 (_initialize_rs6000_tdep): Initialize AltiVec descriptions.
584 * ppc-linux-tdep.h: New file.
586 * ppc-linux-tdep.c: Include "ppc-linux-tdep.c".
587 Include "features/rs6000/powerpc-32l.c".
588 Include "features/rs6000/powerpc-altivec32l.c".
589 Include "features/rs6000/powerpc-64l.c".
590 Include "features/rs6000/powerpc-altivec64l.c".
591 Include "features/rs6000/powerpc-e500l.c".
592 (ppc_linux_supply_gregset): New function.
593 (ppc_linux_collect_gregset): Handle orig_r3 and trap registers.
594 (ppc32_linux_gregset): Use ppc_linux_supply_gregset.
595 (ppc64_linux_gregset): Likewise.
596 (ppc_linux_sigtramp_cache): Handle orig_r3 and trap registers.
597 (ppc_linux_trap_reg_p): New function.
598 (ppc_linux_write_pc): New function.
599 (ppc_linux_core_read_description): New function.
600 (ppc_linux_init_abi): Install ppc_linux_write_pc and
601 ppc_linux_core_read_description. Install orig_r3 and trap
602 registers if present in the target description.
603 (_initialize_ppc_linux_tdep): Initialize Linux target descriptions.
605 * ppc-linux-nat.c: Include "ppc-linux-tdep.h".
606 (PT_ORIG_R3, PT_TRAP): Define if necessary.
607 (ppc_register_u_addr): Handle orig_r3 and trap registers.
608 (fetch_ppc_registers): Likewise.
609 (store_ppc_registers): Likewise.
610 (store_register): Likewise.
611 (ppc_linux_read_description): Check whether AltiVec is supported.
612 Check whether inferior is 32-bit or 64-bit. Return the appropriate
613 Linux target description.
615 * features/Makefile (WHICH): Use rs6000/powerpc-32l and
616 rs6000/powerpc-altivec32l instead of rs6000/powerpc-32.
617 Use rs6000/powerpc-64l and rs6000/powerpc-altivec64l instead
618 of rs6000/powerpc-64. Use rs6000/powerpc-e500l instead of
619 rs6000/powerpc-e500. Update -expedite variables accordingly.
621 * features/rs6000/power-spe.xml: Use regnum 73 for "acc".
622 * features/rs6000/powerpc-32.xml: Do not include power-altivec.xml.
623 * features/rs6000/powerpc-64.xml: Do not include power-altivec.xml.
624 * features/rs6000/powerpc-e500.c: Regenerate.
625 * features/rs6000/powerpc-32.c: Regenerate.
626 * features/rs6000/powerpc-64.c: Regenerate.
628 * features/rs6000/power-linux.xml: New file.
629 * features/rs6000/power64-linux.xml: New file.
630 * features/rs6000/powerpc-32l.xml: New file.
631 * features/rs6000/powerpc-altivec32l.xml: New file.
632 * features/rs6000/powerpc-64l.xml: New file.
633 * features/rs6000/powerpc-altivec64l.xml: New file.
634 * features/rs6000/powerpc-e500l.xml: New file.
635 * features/rs6000/powerpc-32l.c: New (generated) file.
636 * features/rs6000/powerpc-altivec32l.c: New (generated) file.
637 * features/rs6000/powerpc-64l.c: New (generated) file.
638 * features/rs6000/powerpc-altivec64l.c: New (generated) file.
639 * features/rs6000/powerpc-e500l.xml: New (generated) file.
641 * regformats/reg-ppc.dat: Remove.
642 * regformats/reg-ppc64.dat: Remove.
643 * regformats/rs6000/powerpc-32.dat: Remove.
644 * regformats/rs6000/powerpc-64.dat: Remove.
645 * regformats/rs6000/powerpc-e500.dat: Remove.
646 * regformats/rs6000/powerpc-32l.dat: New (generated) file.
647 * regformats/rs6000/powerpc-altivec32l.dat: New (generated) file.
648 * regformats/rs6000/powerpc-64l.dat: New (generated) file.
649 * regformats/rs6000/powerpc-altivec64l.dat: New (generated) file.
650 * regformats/rs6000/powerpc-e500l.dat: New (generated) file.
652 2008-05-03 Pedro Alves <pedro@codesourcery.com>
654 * thread.c (delete_thread): Call observer_notify_thread_exit.
655 * mi/mi-interp.c (mi_interpreter_init): Register mi_thread_exit as
656 thread_exit observer.
657 (mi_thread_exit): New.
659 2008-05-03 Thiago Jung Bauermann <bauerman@br.ibm.com>
661 * breakpoint.c (create_exception_catchpoint): Remove prototype
662 for already deleted function.
663 * breakpoint.h (ep_is_exception_catchpoint): Likewise.
664 * frame.h (show_stack_frame): Remove prototype.
665 * stack.c (show_stack_frame): Remove empty, unused function.
666 * source.c (symtab_to_fullname, print_source_lines): Small fix
668 * value.c (show_values): Update comments to mention "show values"
669 command instead of "info history".
671 2008-05-02 Ulrich Weigand <uweigand@de.ibm.com>
673 * linespec.c: Include "target.h".
674 (minsym_found): Handle minimal symbols pointing to function
675 descriptors. Use find_function_start_pc.
676 * minsyms.c (msymbol_objfile): New function.
677 * parse.c (write_exp_msymbol): Handle minimal symbols pointing
678 to function descriptors.
679 * symtab.c (fixup_section): Only use minimal symbol at the same
680 address to determine section of a symbol.
681 (find_function_start_pc): New function.
682 (find_function_start_sal): Use it.
683 * symtab.h (msymbol_objfile): Add prototype.
684 (find_function_start_pc): Likewise.
685 * value.c: Include "objfiles.h".
686 (value_fn_field): Handle minimal symbols pointing to function
688 * Makefile.in (linespec.o): Update dependencies.
691 2008-05-02 Joel Brobecker <brobecker@adacore.com>
693 * ada-lang.c (unwrap_value): Handle the case where the "F" field
694 inside a PAD type is a bitfield.
696 2008-05-02 Ulrich Weigand <uweigand@de.ibm.com>
698 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Handle
699 TYPE_CODE_BOOL and TYPE_CODE_CHAR the same as TYPE_CODE_INT.
700 Handle TYPE_CODE_REF the same as TYPE_CODE_PTR.
701 Handle TYPE_CODE_METHOD the same as TYPE_CODE_FUNC.
702 Allow typedefs when checking for function pointer arguments.
703 Right-align small structs passed on the stack.
704 (ppc64_sysv_abi_return_value): Handle TYPE_CODE_BOOL and
705 TYPE_CODE_CHAR the same as TYPE_CODE_INT.
706 Handle TYPE_CODE_REF the same as TYPE_CODE_PTR.
708 2008-05-02 Daniel Jacobowitz <dan@codesourcery.com>
710 * Makefile.in (arm-tdep.o): Update.
711 * arm-tdep.c (arm_objfile_data_key, struct arm_mapping_symbol)
712 (struct arm_per_objfile, arm_compare_mapping_symbols): New.
713 (arm_pc_is_thumb): Use mapping symbols.
714 (arm_objfile_data_cleanup, arm_record_special_symbol): New.
715 (arm_gdbarch_init): Call set_gdbarch_record_special_symbol.
716 (_initialize_arm_tdep): Initialize arm_objfile_data_key.
717 * elfread.c (elf_symtab_read): Use gdbarch_record_special_symbol.
718 * gdbarch.sh: Add record_special_symbol.
719 * gdbarch.c, gdbarch.h: Regenerated.
720 * objfiles.c (struct objfile_data): Add cleanup member.
721 (register_objfile_data_with_cleanup): New function, from
722 register_objfile_data.
723 (register_objfile_data): Use it.
724 (objfile_free_data): Call clear_objfile_data.
725 (clear_objfile_data): Call cleanup functions.
726 * objfiles.h (register_objfile_data_with_cleanup): Declare.
728 2008-05-02 Daniel Jacobowitz <dan@codesourcery.com>
730 * objfiles.c (init_entry_point_info): Handle shared libraries.
732 2008-05-02 Daniel Jacobowitz <dan@codesourcery.com>
734 * arm-tdep.c (arm_prologue_this_id): Compare pc, not func, to
737 2008-05-02 Jim Blandy <jimb@codesourcery.com>
738 Pedro Alves <pedro@codesourcery.com>
740 Implement displaced stepping.
742 * gdbarch.sh (max_insn_length): New 'variable'.
743 (displaced_step_copy, displaced_step_fixup)
744 (displaced_step_free_closure, displaced_step_location): New
746 (struct displaced_step_closure): Add forward declaration.
747 * gdbarch.c, gdbarch.h: Regenerated.
749 * arch-utils.c: #include "objfiles.h".
750 (simple_displaced_step_copy_insn)
751 (simple_displaced_step_free_closure)
752 (displaced_step_at_entry_point): New functions.
753 * arch-utils.h (simple_displaced_step_copy_insn)
754 (simple_displaced_step_free_closure)
755 (displaced_step_at_entry_point): New prototypes.
757 * i386-tdep.c (I386_MAX_INSN_LEN): Rename to...
758 (I386_MAX_MATCHED_INSN_LEN): ... this.
759 (i386_absolute_jmp_p, i386_absolute_call_p)
760 (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p)
761 (i386_displaced_step_fixup): New functions.
762 (struct i386_insn, i386_match_insn): Update.
763 (i386_gdbarch_init): Set gdbarch_max_insn_length.
764 * i386-tdep.h (I386_MAX_INSN_LEN): New.
765 (i386_displaced_step_fixup): New prototype.
766 * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h".
767 Register gdbarch_displaced_step_copy,
768 gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure,
769 and gdbarch_displaced_step_location functions.
771 * infrun.c (debug_displaced): New variable.
772 (show_debug_displaced): New function.
773 (struct displaced_step_request): New struct.
774 (displaced_step_request_queue, displaced_step_ptid)
775 (displaced_step_gdbarch, displaced_step_closure)
776 (displaced_step_original, displaced_step_copy)
777 (displaced_step_saved_copy, can_use_displaced_stepping): New
779 (show_can_use_displaced_stepping, use_displaced_stepping)
780 (displaced_step_clear, cleanup_displaced_step_closure)
781 (displaced_step_dump_bytes, displaced_step_prepare)
782 (displaced_step_clear_cleanup, write_memory_ptid)
783 (displaced_step_fixup): New functions.
784 (resume): Call displaced_step_prepare.
785 (proceed): Call read_pc once, and remember the value. If using
786 displaced stepping, don't remove breakpoints.
787 (handle_inferior_event): Call displaced_step_fixup. Add some
788 debugging output. When we try to step over a breakpoint, but get
789 a signal to deliver to the thread instead, ensure the step-resume
790 breakpoint is actually inserted. If a thread hop is needed, and
791 displaced stepping is enabled, don't remove breakpoints.
792 (init_wait_for_inferior): Call displaced_step_clear.
793 (_initialize_infrun): Add "set debug displaced" command. Add
794 "maint set can-use-displaced-stepping" command. Clear
796 * inferior.h (debug_displaced): Declare variable.
797 (displaced_step_dump_bytes): Declare function.
799 * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update
802 2008-05-02 Daniel Jacobowitz <dan@codesourcery.com>
804 * arm-tdep.c (arm_mode_strings, arm_fallback_mode_string)
805 (arm_force_mode_string, arm_show_fallback_mode)
806 (arm_show_force_mode): New.
807 (arm_pc_is_thumb): Honor fallback-mode and force-mode. Use
809 (_initialize_arm_tdep): Add "set arm fallback-mode"
810 and "set arm force-mode".
811 * NEWS: Document new commands.
813 2008-05-02 Andrew Stubbs <andrew.stubbs@st.com>
815 * main.h (batch_silent): Declare.
816 * event-top.c: Include main.h.
817 (gdb_setup_readline): Remove extern batch_silent declaration.
818 * infrun.c (normal_stop): Don't print source location when running in
820 * Makefile.in (event-top.o): Add main.h dependency.
822 2008-05-02 Andreas Schwab <schwab@suse.de>
824 * target.h (struct target_ops): Add
825 to_watchpoint_addr_within_range.
826 (target_watchpoint_addr_within_range): New function.
827 * target.c (update_current_target): Inherit
828 to_watchpoint_addr_within_range, defaulting to
829 default_watchpoint_addr_within_range.
830 (default_watchpoint_addr_within_range): New function.
831 (debug_to_watchpoint_addr_within_range): New function.
832 (setup_target_debug): Set to_watchpoint_addr_within_range.
833 * ppc-linux-nat.c (ppc_linux_watchpoint_addr_within_range):
835 (_initialize_ppc_linux_nat): Set to_watchpoint_addr_within_range.
836 * breakpoint.c (watchpoints_triggered): Use
837 target_watchpoint_addr_within_range.
839 2008-05-01 Pedro Alves <pedro@codesourcery.com>
841 * configure.tgt: Add i[34567]86-*-dicos* and x86_64-*-dicos*.
842 (i[34567]86-*-dicos*, x86_64-*-dicos*):
843 Set gdb_osabi to GDB_OSABI_DICOS.
845 * defs.h (enum gdb_osabi): Add GDB_OSABI_DICOS.
846 * osabi.c (gdb_osabi_name): Add "DICOS".
848 * i386-dicos-tdep.c: New file.
850 * Makefile.in (ALL_TARGET_OBS): Add i386-dicos-tdep.o.
851 (ALLDEPFILES): Add i386-dicos-tdep.c.
852 (i386-dicos-tdep.o): New rule.
854 2008-05-01 Pedro Alves <pedro@codesourcery.com>
856 * linux-nat.c (linux_nat_switch_fork): Reinit GDB's thread list
857 and register the fork's PTID as a thread.
859 2008-05-01 Aleksandar Ristovski <aristovski@qnx.com>
862 * breakpoint.c (create_breakpoint): Add breakpoint_ops argument and
863 assign its value to the breakpoint created.
864 (create_breakpoints): Add breakpoint_ops argument and pass it
865 to create_breakpoint call.
866 (break_command_really): Add breakpoint_ops argument and pass/assign
868 (break_command_1): Pass NULL as ops argument.
869 (set_breakpoint): Pass NULL as ops argument.
870 (print_one_exception_catchpoint): Print <PENDING> if no loc available.
871 (handle_gnu_v3_exceptions): Call generic breakpoint code to insert
872 catch and throw catchpoints.
874 2008-05-01 Aleksandar Ristovski <aristovski@qnx.com>
877 * corelow.c (core_open): Use gdbarch_target_signal_from_host to
878 translate signal numeric value from the target to GDB's enum
880 * gdbarch.c, gdbarch.h: Regenerated.
881 * gdbarch.sh: Added two new functions target_signal_from_host and
882 target_signal_to_host.
883 * target.h (default_target_signal_from_host,
884 default_target_signal_to_host): New functions - declarations.
885 * signals/signals.c (struct gdbarch): New declaration.
886 (default_target_signal_to_host, default_target_signal_from_host): New
889 2008-05-01 Daniel Jacobowitz <dan@codesourcery.com>
891 * arm-linux-tdep.h (ARM_CPSR_REGNUM): Delete definition.
892 * arm-tdep.c (arm_frame_is_thumb): New.
893 (arm_pc_is_thumb): Clarify comment.
894 (thumb_analyze_prologue): Remove PC special case.
895 (thumb_scan_prologue): Take a block_addr argument. Use it for
896 find_pc_partial_function. Remove unused variables.
897 (arm_scan_prologue): Use arm_frame_is_thumb. Use the block address
898 for find_pc_partial_function. Remove PC special case.
899 (arm_prologue_prev_register): Add special handling for PC and CPSR.
900 (arm_dwarf2_prev_register, arm_dwarf2_frame_init_reg): New.
901 (arm_get_next_pc): Use arm_frame_is_thumb.
902 (arm_write_pc): Use CPSR_T instead of 0x20.
903 (arm_gdbarch_init): Call dwarf2_frame_set_init_reg.
904 * arm-tdep.h (enum gdb_regnum): Add ARM_CPSR_REGNUM.
906 * dwarf2-frame.c (dwarf2_frame_prev_register): Handle
908 * dwarf2-frame.h (enum dwarf2_frame_reg_rule): Add
910 (struct dwarf2_frame_state_reg): Add FN to loc union.
912 2008-05-01 Nick Roberts <nickrob@snap.net.nz>
914 * exec.c (print_section_info): Add missing '\n'.
916 2008-05-01 Vladimir Prus <vladimir@codesourcery.com>
918 * thread.c (add_thread): Move observer call to ...
919 (add_thread_silent): ... here.
921 2008-04-30 Ulrich Weigand <uweigand@de.ibm.com>
923 * rs6000-tdep.c: Update for unwinder changes.
924 * ppcobsd-tdep.c: Likewise.
926 2008-04-30 Ulrich Weigand <uweigand@de.ibm.com>
928 * s390-tdep.c: Update for unwinder changes.
930 2008-04-30 Ulrich Weigand <uweigand@de.ibm.com>
932 * spu-tdep.c: Update for unwinder changes.
934 2008-04-30 Daniel Jacobowitz <dan@codesourcery.com>
936 * hppanbsd-tdep.c, m68kbsd-tdep.c, mn10300-linux-tdep.c,
937 ppc-linux-tdep.c, ppcnbsd-tdep.c, sparc-linux-tdep.c,
938 sparc64-linux-tdep.c: Update for unwinder changes.
940 2008-04-30 Daniel Jacobowitz <dan@codesourcery.com>
942 * mipsnbsd-tdep.c, mips64obsd-tdep.c, mips-linux-tdep.c: Update
943 for unwinder changes.
944 * mips-tdep.c: Likewise.
945 (mips_stub_frame_cache): Unwind the ABI stack pointer, not the
948 2008-04-30 Daniel Jacobowitz <dan@codesourcery.com>
950 * arm-linux-tdep.c, arm-tdep.c, armobsd-tdep.c: Update for
953 2008-04-30 Daniel Jacobowitz <dan@codesourcery.com>
955 Update i386 and amd64 ports for unwinder changes.
957 * amd64-tdep.c (amd64_frame_cache): Expect this_frame.
958 (amd64_frame_this_id, amd64_frame_prev_register): Update signature.
959 (amd64_frame_unwind): Use default_frame_sniffer.
960 (amd64_frame_sniffer): Delete.
961 (amd64_sigtramp_frame_cache): Expect this_frame.
962 (amd64_sigtramp_frame_this_id, amd64_sigtramp_frame_prev_register)
963 (amd64_sigtramp_frame_sniffer): Update signature.
964 (amd64_sigtramp_frame_unwind): Add amd64_sigtramp_frame_sniffer.
965 (amd64_frame_base_address): Expect this_frame.
966 (amd64_dummy_id): Renamed from amd64_unwind_dummy_id. Expect
968 (amd64_init_abi): Use set_gdbarch_dummy_id and
969 frame_unwind_append_unwinder.
970 * i386-tdep.c (i386_frame_cache): Expect this_frame.
971 (i386_frame_this_id, i386_frame_prev_register): Update signature.
972 (i386_frame_unwind): Use default_frame_sniffer.
973 (i386_frame_sniffer): Delete.
974 (i386_sigtramp_frame_cache): Expect this_frame.
975 (i386_sigtramp_frame_this_id, i386_sigtramp_frame_prev_register)
976 (i386_sigtramp_frame_sniffer): Update signature.
977 (i386_sigtramp_frame_unwind): Use i386_sigtramp_frame_sniffer.
978 (i386_frame_base_address): Update signature.
979 (i386_dummy_id): Rename from i386_unwind_dummy_id. Expect this_frame.
980 (i386_push_dummy_call): Update comment.
981 (i386_sigtramp_p, i386_svr4_sigtramp_p, i386_svr4_sigcontext_addr):
983 (i386_gdbarch_init): Use set_gdbarch_dummy_id, dwarf2_append_unwinders,
984 and frame_unwind_append_unwinder.
985 * amd64-linux-tdep.c, amd64-sol2-tdep.c, amd64fbsd-tdep.c,
986 amd64nbsd-tdep.c, amd64obsd-tdep.c, i386-linux-tdep.c,
987 i386-nto-tdep.c, i386bsd-tdep.c, i386-sol2-tdep.c, i386obsd-tdep.c,
988 i386nbsd-tdep.c: Update for unwinder changes.
990 2008-04-30 Daniel Jacobowitz <dan@codesourcery.com>
992 * trad-frame.c (struct trad_frame_cache): Rename next_frame to this_frame.
993 (trad_frame_cache_zalloc, trad_frame_alloc_saved_regs): Expect
995 (trad_frame_get_prev_register, trad_frame_get_register): Update signature.
996 * trad-frame.h (trad_frame_cache_zalloc, trad_frame_get_register)
997 (trad_frame_alloc_saved_regs, trad_frame_get_prev_register): Update
999 * tramp-frame.c (tramp_frame_cache, tramp_frame_start): Expect
1001 (tramp_frame_this_id, tramp_frame_prev_register, tramp_frame_sniffer):
1003 * tramp-frame.h (struct tramp_frame): Update signature of init.
1004 * Makefile.in (trad-frame.o): Update.
1006 2008-04-30 Daniel Jacobowitz <dan@codesourcery.com>
1008 * dwarf2-frame.c (read_reg): Expect this_frame in the baton.
1009 (execute_stack_op): Put this_frame in the baton.
1010 (execute_cfa_program): Take this_frame.
1011 (struct dwarf2_frame_ops): Update comment for signal_frame_p.
1012 (dwarf2_frame_default_init_reg, dwarf2_frame_init_reg)
1013 (dwarf2_frame_signal_frame_p, dwarf2_frame_cache)
1014 (dwarf2_frame_this_id): Adjust to work on this_frame.
1015 (dwarf2_signal_frame_this_id): Delete.
1016 (dwarf2_frame_prev_register): Update signature. Use new frame
1018 (dwarf2_frame_sniffer): Update signature. Expect this_frame.
1019 (dwarf2_frame_unwind, dwarf2_signal_frame_unwind): Add
1020 dwarf2_frame_sniffer.
1021 (dwarf2_append_unwinders): New.
1022 (dwarf2_frame_base_address, dwarf2_frame_base_sniffer): Expect
1024 * sparc-tdep.c (sparc32_dwarf2_struct_return_p)
1025 (sparc32_dwarf2_frame_init_reg): Expect this_frame.
1026 * cris-tdep.c (cris_dwarf2_frame_init_reg): Likewise.
1027 * rs6000-tdep.c (ppc_dwarf2_frame_init_reg): Likewise.
1028 * s390-tdep.c (s390_dwarf2_frame_init_reg): Likewise.
1029 * sh-tdep.c (sh_dwarf2_frame_init_reg): Likewise.
1030 * sparc64-tdep.c (sparc64_dwarf2_frame_init_reg): Likewise.
1031 * dwarf2-frame.h (dwarf2_frame_sniffer): Delete declaration.
1032 (dwarf2_append_unwinders): Declare.
1033 (dwarf2_frame_base_sniffer): Update declaration.
1034 * i386-linux-tdep.c (i386_linux_dwarf_signal_frame_p): Expect
1037 2008-04-30 Daniel Jacobowitz <dan@codesourcery.com>
1039 Convert frame unwinders to use the current frame and
1042 * frame.c (frame_debug): Make global.
1043 (get_frame_id): Pass this frame to unwinder routines.
1044 (frame_pc_unwind): Remove unused unwind->prev_pc support.
1045 (do_frame_register_read): Do not discard the return value of
1046 frame_register_read.
1047 (frame_register_unwind): Remove debug messages. Use
1048 frame_unwind_register_value.
1049 (frame_unwind_register_value, get_frame_register_value): New
1051 (create_new_frame, get_frame_base_address, get_frame_locals_address)
1052 (get_frame_args_address, get_frame_type): Pass this frame to
1054 (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New
1056 * frame.h: Update comments.
1057 (frame_debug, frame_unwind_register_value, get_frame_register_value)
1058 (frame_prepare_for_sniffer): Declare.
1059 * frame-unwind.h: Update comments and parameter names.
1060 (default_frame_sniffer): Declare.
1061 (frame_prev_register_ftype): Return a struct value *.
1062 (struct frame_unwind): Remove prev_pc member.
1063 (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete.
1064 (frame_unwind_append_unwinder, frame_unwind_got_optimized)
1065 (frame_unwind_got_register, frame_unwind_got_memory)
1066 (frame_unwind_got_constant, frame_unwind_got_address): Declare.
1067 * frame-base.h: Update comments and parameter names.
1068 * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate
1069 if necessary. Add debugging output.
1070 * sentinel-frame.c (sentinel_frame_prev_register)
1071 (sentinel_frame_this_id): Update for new signature.
1072 (sentinel_frame_prev_pc): Delete.
1073 (sentinel_frame_unwinder): Remove prev_pc.
1074 * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize
1076 * libunwind-frame.c (libunwind_frame_unwind): Likewise.
1077 * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer.
1078 (frame_unwind_append_sniffer): Delete.
1079 (frame_unwind_append_unwinder): New function.
1080 (frame_unwind_find_by_frame): Take this frame. Only use sniffers
1081 from unwinders. Use frame_prepare_for_sniffer.
1082 (default_frame_sniffer, frame_unwind_got_optimized)
1083 (frame_unwind_got_register, frame_unwind_got_memory)
1084 (frame_unwind_got_constant, frame_unwind_got_address): New functions.
1085 * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id.
1086 (dummy_frame_prev_register, dummy_frame_this_id): Update for new
1088 * gdbarch.sh: Replace unwind_dummy_id with dummy_id.
1089 * gdbarch.c, gdbarch.c: Regenerated.
1090 * frame-base.c (default_frame_base_address)
1091 (default_frame_locals_address, default_frame_args_address): Update
1093 (frame_base_find_by_frame): Pass this frame to unwinder routines.
1094 * infcall.c (call_function_by_hand): Update comments.
1095 * Makefile.in (frame-unwind.o): Update dependencies.
1097 2008-04-30 Daniel Jacobowitz <dan@codesourcery.com>
1099 * ada-lang.c (ada_value_primitive_packed_val): Only check
1100 value_lazy for memory lvals.
1101 * findvar.c (value_of_register_lazy): New function.
1102 (locate_var_value): Only check value_lazy for memory lvals.
1103 * valarith.c (value_subscripted_rvalue): Likewise.
1104 * valops.c (value_fetch_lazy): Handle both memory and register
1106 (search_struct_field, value_slice): Only check value_lazy for memory
1108 * value.c (struct value): Update comment for lazy.
1109 (value_primitive_field): Only check value_lazy for memory lvals.
1110 * value.h (value_lazy): Update comment.
1111 (value_of_register_lazy): Declare.
1113 2008-04-30 Daniel Jacobowitz <dan@codesourcery.com>
1115 * corefile.c (reopen_exec_file): Close any open files.
1117 2008-04-29 Joel Brobecker <brobecker@adacore.com>
1119 * ia64-tdep.c (ia64_memory_remove_breakpoint): Set
1120 show_memory_breakpoints to 1 while reading the instruction bundle.
1122 2008-04-29 Joel Brobecker <brobecker@adacore.com>
1124 * gdbarch.sh: Document the return_value method. Explain that
1125 the FUNCTYPE parameter might be NULL.
1126 * gdbarch.h: Regenerated.
1127 * sparc-tdep.c (sparc32_push_dummy_code): Do not pass the function
1128 type when calling using_struct_return, as this is unnecessary
1131 2008-04-28 Joel Brobecker <brobecker@adacore.com>
1133 * terminal.h (create_tty_session): Fix return type.
1135 2008-04-26 Vladimir Prus <vladimir@codesourcery.com>
1137 * mi/mi-interp.c (mi_new_thread): Quote the thread id.
1139 2008-04-26 Joel Brobecker <brobecker@adacore.com>
1141 * breakpoint.c (condition_command, commands_from_control_command)
1142 (break_command_really): Minor reformatting.
1144 2008-04-25 Pedro Alves <pedro@codesourcery.com>
1146 * dwarf2read.c (dwarf2_const_value): Handle DW_FORM_strp.
1148 2008-04-25 Pedro Alves <pedro@codesourcery.com>
1150 * amd64-tdep.c (amd64_get_longjmp_target): New.
1151 (amd64_init_abi): Register amd64_get_longjmp_target as
1152 gdbarch_get_longjmp_target callback.
1153 * i386-tdep.c (i386_get_longjmp_target): Remove 64-bit handling.
1155 2008-04-25 Pedro Alves <pedro@codesourcery.com>
1157 * breakpoint.h (enum bpstat_what_main_action): Delete
1158 BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE.
1160 * breakpoint.c (clrs): Delete.
1161 (bpstat_what): Update table.
1163 * infrun.c (handle_inferior_event): Remove
1164 BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE handling.
1166 2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
1168 * mi/mi-cmds.h (mi_cmd_args_ftype): Remove.
1169 Adjust all prototypes using mi_cmd_args_ftype to use
1171 (struct mi_cmd): Remove the args_func field.
1172 * mi/mi-cmds.c: Don't provide value for the args_func field.
1173 * mi/mi-main.c (mi_execute_async_cli_command)
1174 (mi_cmd_exec_run, mi_cmd_exec_next, mi_cmd_exec_next_instruction)
1175 (mi_cmd_exec_step, mi_cmd_exec_step_instruction)
1176 (mi_cmd_exec_finish, mi_cmd_exec_until, mi_cmd_exec_return)
1177 (mi_cmd_exec_continue, mi_cmd_exec_interrupt)
1178 (mi_cmd_target_download): Adjust.
1179 (mi_cmd_target_select): Adjust. Pass 0 for from_tty parameter.
1180 (mi_cmd_execute): Do not check for args_func.
1181 (mi_execute_async_cli_command): Adjust.
1182 * mi/mi-parse.c: Don't check for args_func.
1184 2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
1186 * breakpoint.c (bpstat_check_location)
1187 (bpstat_check_watchpoint, bpstat_check_breakpoint_conditions):
1188 New, extracted from bpstat_stop_status.
1189 (bpstat_stop_status): Use the above.
1191 2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
1193 * mi/mi-main.c (last_async_command): Rename to current_token.
1194 (previous_async_command): Remove.
1195 (mi_cmd_gdb_exit): Adjust.
1196 (mi_cmd_exec_interrupt): Don't dance with previous_async_command.
1197 (mi_cmd_target_select): Adjust.
1198 (mi_cmd_execute): Don't set previous_async_command. Free token
1199 here even in async mode.
1200 (mi_execute_async_cli_command): Adjust.
1201 (mi_exec_async_cli_cmd_continuation): Adjust. Do not free the
1203 (mi_load_progress): Adjust.
1205 2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
1207 * infcmd.c (step_1_continuation): Always disable longjmp
1208 breakpoint if we're not going to do another step.
1210 2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
1212 exec_cleanup murder.
1213 * breakpoint.c (until_break_command_continuation): Add
1214 the 'error' parameter. Directly delete the breakoint as
1215 opposed to running cleanups.
1216 (until_break_command): Install continuation only
1217 after starting the target. Don't use exec cleanups,
1218 use ordinary cleanups. Discard cleanups is successfully
1219 started the target in async mode.
1220 (make_cleanup_delete_breakpoint): Remove.
1221 * breakpoint.h (make_cleanup_delete_breakpoint): Remove
1223 * defs.h (do_exec_cleanups, make_exec_cleanup): Remove
1225 (struct continations): Add the 'error' parameter to the
1226 continuation_hook field.
1227 (add_continuation, do_all_continuations)
1228 (add_intermediate_continuation)
1229 (do_all_intermediate_continuations): Add the 'error' parameter.
1230 * exceptions.c (throw_exception): Don't call do_exec_cleanups.
1231 * inf-loop.c (inferior_event_handler): Instead of calling
1232 discard_all_continuations, use do_all_continuations with 1 as
1233 'error' parameter. Pass 0 as 'error' parameter in existing uses
1234 of discard_all_continuations.
1235 * infcmd.c (step_1): Do not use exec cleanup. For async case, discard
1237 (step_once): Install continuation only after resuming the target.
1238 (step_1_continuation): Disable longjmp breakpoint on error.
1239 (finish_command_continuation): Add the error parameter. Delete
1240 the finish breakpoint directly, do not use cleanups.
1241 (finish_command): Do not use exec_cleanups. Always setup
1242 continuation. For sync case, immediately run them.
1243 (attach_command_continuation): Add the error parameter.
1244 * infrun.c (fetch_inferior_event): Do not use exec cleanups to
1245 remove step_resume_breakpoint -- adjust delete it directly.
1246 * interps.c (interp_set): Adjust call to do_all_continations.
1247 * mi/mi-interp.c (mi_interpreter_exec_continuation): Do not
1249 * mi/mi-main.c (mi_cmd_target_select): Do not do exec
1251 (mi_cmd_execute): Do not use exec_cleanup.
1252 (mi_execute_async_cli_command): Simplify the string concatenation
1253 logic. Do no use exec cleanup.
1254 (mi_exec_async_cli_cmd_continuation): New parameter error.
1255 Free last_async_command.
1256 * top.c (command_line_handler_continuation): New parameter error.
1257 * utils.c (exec_cleanup_chain, make_exec_cleanup)
1258 (do_exec_cleanups): Remove.
1259 (add_continuation, do_all_continations)
1260 (add_intermediate_continuation)
1261 (do_all_intermediate_continuations): New parameter error.
1263 2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
1265 * breakpoint.h (bp_location_p): New typedef.
1266 Register a vector of bp_location_p.
1267 * breakpoint.c (always_inserted_mode)
1268 (show_always_inserted_mode): New.
1269 (unlink_locations_from_global_list): Remove.
1270 (update_global_location_list)
1271 (update_global_location_list_nothrow): New.
1272 (update_watchpoint): Don't free locations.
1273 (should_insert_location): New.
1274 (insert_bp_location): Use should_insert_location.
1275 (insert_breakpoint_locations): Copied from
1277 (insert_breakpoint): Use insert_breakpoint_locations.
1278 (bpstat_stop_status): Call update_global_location_list
1279 when disabling breakpoint.
1280 (allocate_bp_location): Don't add to bp_location_chain.
1281 (set_raw_breakpoint)
1282 (create_longjmp_breakpoint, enable_longjmp_breakpoint)
1283 (disable_longjmp_breakpoint, create_overlay_event_breakpoint)
1284 (enable_overlay_breakpoints, disable_overlay_breakpoints)
1285 (set_longjmp_resume_breakpoint)
1286 (enable_watchpoints_after_interactive_call_stop)
1287 (disable_watchpoints_before_interactive_call_start)
1288 (create_internal_breakpoint)
1289 (create_fork_vfork_event_catchpoint)
1290 (create_exec_event_catchpoint, set_momentary_breakpoint)
1291 (create_breakpoints, break_command_1, watch_command_1)
1292 (create_exception_catchpoint)
1293 (handle_gnu_v3_exceptions)
1294 (disable_breakpoint, breakpoint_re_set_one)
1295 (create_thread_event_breakpoint, create_solib_event_breakpoint)
1296 (create_ada_exception_breakpoint): : Don't call check_duplicates.
1297 Call update_global_location_list.
1298 (delete_breakpoint): Don't remove locations and don't
1299 try to reinsert them. Call update_global_location_list.
1300 (update_breakpoint_locations): Likewise.
1301 (restore_always_inserted_mode): New.
1302 (update_breakpoints_after_exec): Temporary disable
1303 always inserted mode.
1304 * Makefile.in: Update dependencies.
1306 * infrun.c (proceed): Remove breakpoints while stepping
1308 (handle_inferior_event): Don't remove or insert
1310 * linux-fork.c (checkpoint_command): Remove breakpoints
1311 before fork and insert after.
1312 (linux_fork_context): Remove breakpoints before switch
1314 * target.c (target_disconnect, target_detach): Remove
1315 breakpoints from target.
1318 2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
1320 * breakpoint.c (print_one_breakpoint_location): In MI
1321 mode, report the location string the breakpoint was
1322 originally created with.
1324 2008-04-23 Maxim Grigoriev <maxim2405@gmail.com>
1326 * Makefile.in (xtensa-tdep.o): Update dependencies.
1327 * configure.tgt (xtensa*): Update dependencies.
1328 * xtensa-tdep.c (arreg_number): Renamed from areg_number.
1329 Local variable areg renamed to arreg.
1330 (areg_number): New function.
1331 (xtensa_pseudo_register_read, xtensa_pseudo_register_write)
1332 (xtensa_extract_return_value, xtensa_store_return_value): areg_number
1333 replaced by arreg_number.
1334 (xtensa_windowed_frame_cache, struct xtensa_frame_cache): New comments.
1335 (xtensa_alloc_frame_cache): Initialize cache->wd.ws.
1336 (xtensa_scan_prologue): New function.
1337 (xtensa_frame_cache): New local fp_regnum. Handle separately the case,
1338 when ENTRY instraction hasn't been executed yet. Get the frame pointer
1339 value based on prologue analysis. Fix the bugs preventing WS and
1340 AR4-AR7/A11 registers from getting right values for intermediate frames,
1341 whose registers have been already spilled.
1342 (xtensa_frame_prev_register): Fix WS register value. Use are_number
1343 and arreg_number appropriately.
1344 (xtensa_gdbarch_init): Set solib_svr4_fetch_link_map_offsets to
1345 svr4_ilp32_fetch_link_map_offsets.
1347 2008-04-23 Andrew Stubbs <andrew.stubbs@st.com>
1349 * printcmd.c: Define USE_PRINTF_I64 and PRINTF_HAS_LONG_LONG on MinGW.
1350 (printf_command): Convert %lld to %I64d when USE_PRINTF_I64 set.
1352 2008-04-23 Paolo Bonzini <bonzini@gnu.org>
1354 * acinclude.m4: Add override.m4.
1355 * configure: Regenerate.
1357 2008-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
1359 * ada-lang.c (get_selections): Variable PROMPT made non-const and
1360 initialized with a trailing space now. Use PROMPT_ARG of
1361 COMMAND_LINE_INPUT instead of printing it ourselves.
1363 2008-04-22 Joel Brobecker <brobecker@adacore.com>
1365 * NEWS: Document support for 64-bit core file.
1367 2008-04-22 Corinna Vinschen <vinschen@redhat.com>
1369 * NEWS: Add information on calling convention and new SH CLI options.
1371 * sh-tdep.c (sh_cc_gcc): New static string.
1372 (sh_cc_renesas): Ditto.
1373 (sh_cc_enum): New static string array.
1374 (sh_active_calling_convention): New static string pointer denoting
1375 active user chosen ABI.
1376 (sh_is_renesas_calling_convention): New function to return function
1377 specific ABI, or user choice if necessary.
1378 (sh_use_struct_convention): Rename first argument and turn around its
1379 meaning. Check for renesas ABI and return accordingly.
1380 (sh_use_struct_convention_nofpu): New function.
1381 (sh_next_flt_argreg): Get function type as third parameter. Check
1382 for renesas ABI and choose floating registers accordingly.
1383 (sh_push_dummy_call_fpu): Check for ABI and choose argument slot and
1384 struct return slot accordingly.
1385 (sh_push_dummy_call_nofpu): Ditto.
1386 (sh_return_value_nofpu): Call sh_use_struct_convention_nofpu from here.
1387 Evaluate ABI and give to sh_use_struct_convention_nofpu.
1388 (sh_return_value_fpu): Evaluate ABI and give to
1389 sh_use_struct_convention.
1390 (show_sh_command): New function.
1391 (set_sh_command): Ditto.
1392 (_initialize_sh_tdep): Initialize `set/show sh calling-convention
1395 * gdbarch.sh (return_value): Add func_type argument.
1396 * gdbarch.c: Regenerate.
1398 * eval.c (evaluate_subexp_standard): Rename local variable value_type to
1399 val_type so as not to collide with value_type function. Call
1400 using_struct_return with additional function type argument.
1401 * infcall.c (call_function_by_hand): Call using_struct_return and
1402 gdbarch_return_value with additional function type argument.
1403 * infcmd.c (print_return_value): Take addition func_type argument.
1404 Call gdbarch_return_value with additional function type argument.
1405 (finish_command_continuation): Call print_return_value with additional
1406 function type argument.
1407 (finish_command): Ditto.
1408 * sparc-tdep.c (sparc32_push_dummy_code): Call using_struct_return with
1409 additional function type argument.
1410 * stack.c (return_command): Call using_struct_return and
1411 gdbarch_return_value with additional function type argument.
1412 * value.c (using_struct_return): Take additional function type argument.
1413 * value.h (using_struct_return): Accommodate declaration.
1414 * alpha-tdep.c (alpha_return_value): Add func_type argument.
1415 * amd64-tdep.c (amd64_return_value): Ditto.
1416 * arm-tdep.c (arm_return_value): Ditto.
1417 * avr-tdep.c (avr_return_value): Ditto.
1418 * cris-tdep.c (cris_return_value): Ditto.
1419 * frv-tdep.c (frv_return_value): Ditto.
1420 * h8300-tdep.c (h8300_return_value): Ditto.
1421 (h8300h_return_value): Ditto.
1422 * hppa-tdep.c (hppa32_return_value): Ditto.
1423 (hppa64_return_value): Ditto.
1424 * i386-tdep.c (i386_return_value): Ditto.
1425 * ia64-tdep.c (ia64_return_value): Ditto.
1426 * iq2000-tdep.c (iq2000_return_value): Ditto.
1427 * m32c-tdep.c (m32c_return_value): Ditto.
1428 * m32r-tdep.c (m32r_return_value): Ditto.
1429 * m68hc11-tdep.c (m68hc11_return_value): Ditto.
1430 * m68k-tdep.c (m68k_return_value): Ditto.
1431 (m68k_svr4_return_value): Ditto.
1432 * m88k-tdep.c (m88k_return_value): Ditto.
1433 * mep-tdep.c (mep_return_value): Ditto.
1434 * mips-tdep.c (mips_eabi_return_value): Ditto.
1435 (mips_n32n64_return_value): Ditto.
1436 (mips_o32_return_value): Ditto.
1437 (mips_o64_return_value): Ditto.
1438 * mn10300-tdep.c (mn10300_return_value): Ditto.
1439 * mt-tdep.c (mt_return_value): Ditto.
1440 * ppc-linux-tdep.c (ppc_linux_return_value): Ditto.
1441 * ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Ditto.
1442 (ppc_sysv_abi_broken_return_value): Ditto.
1443 (ppc64_sysv_abi_return_value): Ditto.
1444 * ppc-tdep.h (ppc_sysv_abi_return_value): Ditto.
1445 (ppc_sysv_abi_broken_return_value): Ditto.
1446 (ppc64_sysv_abi_return_value): Ditto.
1447 * ppcnbsd-tdep.c (ppcnbsd_return_value): Ditto.
1448 * rs6000-tdep.c (rs6000_return_value): Ditto.
1449 * s390-tdep.c (s390_return_value): Ditto.
1450 * score-tdep.c (score_return_value): Ditto.
1451 * sh-tdep.c (sh_return_value_nofpu): Ditto.
1452 (sh_return_value_fpu): Ditto.
1453 * sh64-tdep.c (sh64_return_value): Ditto.
1454 * sparc-tdep.c (sparc32_return_value): Ditto.
1455 * sparc64-tdep.c (sparc64_return_value): Ditto.
1456 * spu-tdep.c (spu_return_value): Ditto.
1457 * v850-tdep.c (v850_return_value): Ditto.
1458 * vax-tdep.c (vax_return_value): Ditto.
1459 * xstormy16-tdep.c (xstormy16_return_value): Ditto.
1460 * xtensa-tdep.c (xtensa_return_value): Ditto.
1462 * gdbtypes.h (struct type): Add calling_convention member.
1463 * dwarf2read.c (read_subroutine_type): Add calling convention read
1464 from DW_AT_calling_convention attribute to function type.
1466 2008-04-22 Markus Deuling <deuling@de.ibm.com>
1468 * eval.c (evaluate_subexp_standard): Use value_subscripted_rvalue for
1469 multi_f77_subscript to support values from registers.
1470 * valarith.c (value_subscripted_rvalue): Remove prototype and static.
1471 * value.h (value_subscripted_rvalue): Add prototype.
1473 * f-typeprint.c (f_type_print_base): Add support for TYPE_CODE_UNION.
1475 * f-valprint.c (f_val_print): Likewise.
1477 2008-04-21 Craig Silverstein <csilvers@google.com>
1479 * dwarf2read.c (zlib_decompress_section): Define abfd in the
1482 2008-04-21 Pedro Alves <pedro@codesourcery.com>
1484 * symfile.c (syms_from_objfile): Don't warn if lowest loadable
1485 section is not a code section.
1487 2008-04-19 Craig Silverstein <csilvers@google.com>
1489 * NEWS: Add information on compressed debug sections.
1491 2008-04-19 Vladimir Prus <vladimir@codesourcery.com>
1493 * mi/mi-cmd-var.c (varobj_update_one): Print new
1494 value for variable objects that changed type.
1496 2008-04-19 Vladimir Prus <vladimir@codesourcery.com>
1498 * varobj.c (varobj_invalidate): Don't touch floating
1501 2008-04-19 Mark Kettenis <kettenis@gnu.org>
1503 * symtab.c: (multiple_symbols_modes, multiple_symbols_ask)
1504 (multiple_symbols_cancel): Remove extra const.
1505 * symtab.h: Likewise.
1507 2008-04-19 Nick Roberts <nickrob@snap.net.nz>
1509 * interps.c (top_level_interpreter): Rename static variable...
1510 (top_level_interpreter_ptr): ...to this.
1511 (top_level_interpreter): New function.
1513 * interps.h: New extern for top_level_interpreter.
1515 * linespec.c: Include interps.h and mi/mi-cmds.h.
1516 (decode_line_2): When using MI, always set all breakpoints in menu.
1518 * Makefile.in (linespec.o, mi-interp.o): Add dependencies.
1520 2008-04-18 Craig Silverstein <csilvers@google.com>
1522 * configure.ac (AC_SEARCH_LIBS): Add check for zlib.
1523 * config.in, configure: Regenerate.
1524 * dwarf2read.c: Include zlib.h if present.
1525 Modified *_SECTION macros.
1526 (section_is_p): New.
1527 (dwarf2_locate_sections): Use section_is_p instead of strcmp
1528 (dwarf2_resize_section): New.
1529 to determine whether a given section has a given name.
1530 (zlib_decompress_section): New.
1531 (dwarf2_read_section): Read the compressed section if present
1533 * MAINTAINERS: Added myself to section Write After Approval.
1535 2008-04-18 Thiago Jung Bauermann <bauerman@br.ibm.com>
1537 * defs.h (exec_set_section_offsets): Remove prototype.
1538 * exec.c (exec_set_section_offsets): Remove function.
1540 2008-04-18 Joel Brobecker <brobecker@adacore.com>
1542 * stabsread.c (cleanup_undefined_types_1): Add instance flags check
1543 in the search for the matching symbol.
1545 2008-04-17 Marc Khouzam <marc.khouzam@ericsson.com>
1547 * breakpoint.c (update_watchpoint): Always reparse
1550 2008-04-17 Joel Brobecker <brobecker@adacore.com>
1552 * breakpoint.c (print_one_breakpoint_location): Make sure to print
1553 the breakpoint address only once.
1555 2008-04-17 Dennis Roberts <dennis.roberts@sunquestinfo.com>
1557 * rs6000-tdep.c (rs6000_gdbarch_init): Use the BFD architecture,
1558 rather than a hard-coded architecture, for xcoff executables.
1560 2008-04-17 Doug Evans <dje@google.com>
1562 * buildsym.c (watch_main_source_file_lossage): New fn.
1563 (end_symtab): Call it.
1565 * source.c (find_and_open_source): Add some comments clarifying
1566 handling of FULLNAME argument. Make static. Remove pointless
1569 2008-04-17 Pedro Alves <pedro@codesourcery.com>
1571 * inf-loop.c (inferior_event_handler): Also run the intermediate
1572 continuations in the INF_EXEC_COMPLETE case.
1574 2008-04-16 Tom Tromey <tromey@redhat.com>
1576 * cli/cli-decode.h (CMD_ASYNC_OK): New define.
1577 (set_cmd_async_ok, get_cmd_async_ok): Declare.
1578 * cli/cli-decode.c (set_cmd_async_ok): New function.
1579 (get_cmd_async_ok): New function.
1580 * cli/cli-cmds.c (init_cli_cmds): Mark "pwd", "help", "info", and
1582 * top.c (execute_command): Use get_cmd_async_ok.
1583 * infcmd.c: Include cli/cli-decode.h.
1584 (_initialize_infcmd): Mark "interrupt" as async-ok.
1585 * Makefile.in (infcmd.o): Depend on cli_decode_h.
1587 2008-04-16 Daniel Jacobowitz <dan@codesourcery.com>
1590 * exec.c: Correct "arch-utils.h" include.
1592 2008-04-15 Aleksandar Ristovski <aristovski@qnx.com>
1595 * infrun.c (normal_stop) Move breakpoint_auto_delete further down
1596 to allow printing to 'see' real reason of stop. This fixes PR 2424.
1597 * breakpoint.c (bpdisp_texst): New function. The function takes over
1598 the role of bpstats static array in print_one_breakpoint_location.
1599 (print_it_typical): Print "Temporary breakpoint" instead
1600 of just "Breakpoint" when breakpoint is, well, temporary. For mi-like
1601 protocols, print disp field.
1602 (print_one_breakpoint_location): Removed bpdisps static definition.
1603 Call new bpstat_text function to get value for 'disp' field.
1604 (mention): Print "Temporary breakpoint" instead of just "Breakpoint".
1606 2008-04-15 Daniel Jacobowitz <dan@codesourcery.com>
1608 * gnulib/Makefile.am, gnulib/m4/gnulib-cache.m4,
1609 gnulib/aux/link-warning.h, gnulib/extra/link-warning.h: Adjust
1610 by rerunning gnulib-tool with --aux-dir=gnulib/extra.
1611 * gnulib/Makefile.in: Regenerate.
1613 2008-04-14 Daniel Jacobowitz <dan@codesourcery.com>
1615 * Makefile.in (GNULIB_H): New. Trigger all-lib.
1616 (defs_h): Use $(GNULIB_H).
1617 (all-lib): Depend on gnulib/Makefile.
1618 (gnulib/Makefile): Regenerate gnulib/Makefile and gnulib/.deps.
1619 * config.in, gnulib/Makefile.in: Regenerated.
1621 2008-04-14 Daniel Jacobowitz <dan@codesourcery.com>
1623 * Makefile.in (LIBGNU, INCGNU): Define.
1624 (INTERNAL_CFLAGS_BASE): Add INCGNU.
1625 (INTERNAL_LIBS, CLIBS, CDEPS): Add LIBGNU.
1627 ($(LIBGNU), all-lib): New rules.
1628 (clean, distclean, do-maintainer-clean): Use CLEANDIRS.
1629 * configure.ac: Use gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE.
1630 Simplify AC_CONFIG_AUX_DIR. Generate gnulib/Makefile.
1631 * gnulib: New directory, from gnulib-tool.
1632 * configure, aclocal.m4: Regenerated.
1634 2008-04-14 Daniel Jacobowitz <dan@codesourcery.com>
1636 * linux-thread-db.c (have_threads_callback): Check thread->private.
1638 2008-04-13 Nick Roberts <nickrob@snap.net.nz>
1639 Vladimir Prus <vladimir@codesourcery.com>
1642 * varobj.c (value_of_root): Update the expression for
1644 * mi/mi-cmd-var.c (varobj_update_one): If type has changed,
1647 2008-04-09 Marc Khouzam <marc.khouzam@ericsson.com>
1649 * mi/mi-cmd-var.c: Include "mi-getopt.h".
1650 (mi_parse_format): New. Factored out from mi_cmd_var_set_format.
1651 (mi_cmd_var_set_format): Use new mi_parse_format.
1652 (mi_cmd_var_evaluate_expression): Support for -f option to specify
1654 * Makefile.in (mi-cmd-var.o): Update dependencies.
1656 * varobj.h (varobj_get_formatted_value): Declare.
1657 * varobj.c (my_value_of_variable): Added format parameter.
1658 (cplus_value_of_variable): Likewise.
1659 (java_value_of_variable): Likewise.
1660 (c_value_of_variable): Likewise. Evaluate expression based
1661 on format parameter.
1662 (struct language_specific): Add format parameter to function member
1664 (varobj_get_formatted_value): New.
1665 (varobj_get_value): Added format parameter to method call.
1667 2008-04-08 Joel Brobecker <brobecker@adacore.com>
1669 * stabsread.c (cleanup_undefined_types_noname): Manually set the
1670 instance flags of the undefined type before calling replace_type.
1672 2008-04-08 Vladimir Prus <vladimir@codesourcery.com>
1674 * target.h (enum strata): Remove the download_stratum.
1676 2008-04-07 Doug Evans <dje@google.com>
1678 * buildsym.h (last_source_file): Add dwarf info to comment.
1679 (last_source_start_addr): Ditto.
1681 2008-04-07 Pedro Alves <pedro@codesourcery.com>
1683 * alphanbsd-tdep.c: Include "target.h".
1684 * mn10300-tdep.c: Include "target.h".
1685 * Makefile.in (alphanbsd-tdep.o, mn10300-tdep.o): Update.
1687 2008-04-06 Vladimir Prus <vladimir@codesourcery.com>
1689 Fix breakpoint condition that use member variables.
1690 * valops.c (check_field): Remove.
1691 (check_field_in): Rename to check_field.
1692 (value_of_this): Use la_name_of_this.
1693 * value.h (check_field): Adjust prototype.
1695 * language.h (la_value_of_this): Rename to la_name_of_this.
1696 * language.c (unknown_language_defn): Specify "this" for
1698 (auto_language_defn): Likewise.
1699 (local_language_defn): Likewise.
1700 * ada-lang.c (ada_language_defn): Adjust comment.
1701 * c-lang.c (c_language_defn): Adjust comment.
1702 (cplus_language_defn): Specify "this" for name_of_this.
1703 (asm_language_defn): Adjust comment.
1704 (minimal_language_defn): Adjust comment.
1705 * f-lang.c (f_language_defn): Specify NULL for name_of_this.
1706 * jv-lang.c (java_language_defn): Specify "this" for name_of_this.
1707 * m2-lang.c (m2_language_defn): Specify "this" for name_of_this.
1708 * objc-lang.c (objc_language_defn): Specify "self" for
1710 * p-lang.c (pascal_language_defn): Specify "this" for
1712 * scm-lang.c (scm_language_defn): Specify NULL for name_of_this.
1714 * symtab.c (lookup_symbol_aux): Lookup "this" in the
1715 proper scope, and check for field in type of "this", without
1716 trying to create a value.
1718 2008-04-04 Pedro Alves <pedro@codesourcery.com>
1720 * mi/mi-cmds.h (enum mi_cmd_result): Delete MI_CMD_ERROR.
1721 (mi_error_message): Delete declaration.
1722 * mi/mi-interp.c (mi_cmd_interpreter_exec): Call error instead of
1723 returning MI_CMD_ERROR.
1724 * mi/mi-main.c (mi_error_message): Delete.
1725 (mi_cmd_exec_interrupt):
1726 (mi_cmd_thread_select, mi_cmd_thread_list_ids)
1727 (mi_cmd_thread_info): Call error instead of returning
1729 (mi_cmd_data_list_register_values): Call error instead of
1730 returning MI_CMD_ERROR. Adapt to new get_register interface.
1731 (get_register): Change return typo to void. Call error instead of
1732 returning MI_CMD_ERROR.
1733 (mi_cmd_data_write_register_values): Call error instead of
1734 returning MI_CMD_ERROR.
1735 (mi_cmd_list_features): Return MI_CMD_DONE.
1736 (captured_mi_execute_command): Remove MI_CMD_ERROR handling.
1737 (mi_execute_command): Always print exceptions with -error.
1739 2008-04-04 Joel Brobecker <brobecker@adacore.com>
1741 * NEWS: Mention new commands set/show multiple-symbols.
1743 2008-04-03 Joel Brobecker <brobecker@adacore.com>
1745 * symtab.c (multiple_symbols_ask, multiple_symbols_all)
1746 (multiple_symbols_cancel): New constants.
1747 (multiple_symbols_modes, multiple_symbols_mode): New static globals.
1748 (multiple_symbols_select_mode): New function.
1749 (_initialize_symtab): Add new set/show multiple-symbols commands.
1750 * symtab.h (multiple_symbols_ask, multiple_symbols_all)
1751 (multiple_symbols_cancel, multiple_symbols_select_mode): Declare.
1752 * ada-lang.c (user_select_syms): Add handling of new multiple-symbols
1754 * linespec.c (decode_line_2): Likewise.
1756 2008-04-03 Doug Evans <dje@sebabeach.org>
1758 * symtab.h (enum free_code): Delete free_contents, unused.
1759 * symmisc.c (free_symtab_block): Delete.
1760 (free_symtab, case free_code): Delete.
1762 2008-04-01 Aleksandar Ristovski <aristovski@qnx.com>
1764 * valops.c (value_cast_structs): New function. Cast related
1765 STRUCT types up/down and return cast value. The body of this
1766 function comes mostly from value_cast_pointers.
1767 (value_cast_pointers): Code for actual cast STRUCT-STRUCT moved
1768 to value_cast_structs. Now value_cast_pointers needs only create
1769 appropriate reference after using value_cast_structs for actual
1771 (value_cast): Handle references.
1773 2008-04-01 Marc Khouzam <marc.khouzam@ericsson.com>
1775 * MAINTAINERS: Added myself to section Write After Approval.
1777 2008-03-30 Daniel Jacobowitz <dan@codesourcery.com>
1779 * ia64-tdep.c (examine_prologue): Correct array access.
1781 2008-03-28 Aleksandar Ristovski <aristovski@qnx.com>
1783 * cp-support.c (first_component_command): Return if no arguments.
1785 2008-03-28 Carlos O'Donell <carlos@codesourcery.com>
1787 * ser-mingw.c (ser_windows_open): Open requested name.
1789 2008-03-28 Aleksandar Ristovski <aristovski@qnx.com>
1791 * MAINTAINERS: Added myself.
1793 2008-03-28 Pedro Alves <pedro@codesourcery.com>
1795 * target.c (find_default_run_target): Allow a NULL `do_mesg'
1796 parameter. If it is NULL, don't call error.
1797 (find_default_can_async_p, find_default_is_async_p): Pass NULL as
1798 `do_mesg' parameter to find_default_run_target. If no target was
1801 2008-03-28 Daniel Jacobowitz <dan@codesourcery.com>
1803 * mips-linux-tdep.c: Update N32/N64 signal frame comments.
1804 (N64_SIGCONTEXT_LO, N64_SIGCONTEXT_PC, N64_SIGCONTEXT_FPCSR): Update.
1805 (N64_SIGCONTEXT_FIR, N64_SIGCONTEXT_CAUSE, N64_SIGCONTEXT_BADVADDR):
1807 (mips_linux_n32n64_sigframe_init): Do not record cause or badvaddr.
1809 2008-03-27 Joel Brobecker <brobecker@adacore.com>
1813 2008-03-27 Ulrich Weigand <uweigand@de.ibm.com>
1815 * features/Makefile (%.dat): Set xmltarget to the base filename
1816 of the XML source, without subdirectory.
1817 * regformats/rs6000/powerpc-32.dat: Regenerate.
1818 * regformats/rs6000/powerpc-64.dat: Regenerate.
1819 * regformats/rs6000/powerpc-e500.dat: Regenerate.
1821 2008-03-27 Markus Deuling <deuling@de.ibm.com>
1823 * xcoffread.c (scan_xcoff_symtab): Replace current_gdbarch by
1826 2008-03-27 Nick Roberts <nickrob@snap.net.nz>
1828 * mi/mi-main.c (enum captured_mi_execute_command_actions):
1829 Spell suppress in EXECUTE_COMMAND_SUPPRESS_PROMPT correctly.
1831 2008-03-26 Ulrich Weigand <uweigand@de.ibm.com>
1833 * objfiles.h (struct objfile): New GDBARCH member.
1834 (get_objfile_arch): Add prototype.
1835 * objfiles.c: Include "arch-utils.h".
1836 (allocate_objfile): Look up gdbarch associated with bfd.
1837 (get_objfile_arch): New function.
1838 * Makefile (objfiles.o): Update dependencies.
1840 * dwarf2-frame.c (decode_frame_entry_1): Replace current_gdbarch
1842 * dwarf2loc.c (dwarf_expr_read_reg): Replace current_gdbarch
1844 (locexpr_describe_location): Replace current_gdbarch by
1846 * dwarf2read.c (die_type): Replace current_gdbarch by objfile arch.
1847 (dwarf2_add_field): Likewise.
1848 (read_tag_pointer_type): Likewise.
1849 (read_base_type): Likewise.
1850 (new_symbol): Likewise.
1852 * coffread.c (decode_type): Add OBJFILE argument. Update callers.
1853 (decode_base_type, decode_function_type): Likewise.
1854 (coff_read_struct_type, coff_read_enum_type): Likewise.
1855 (coff_symtab_read): Replace current_gdbarch by objfile arch.
1856 (decode_base_type): Likewise.
1857 (coff_read_enum_type): Likewise.
1858 (coff_read_struct_type): Replace current_objfile by OBJFILE argument.
1859 (coff_read_enum_type): Likewise.
1861 * dbxread.c (read_dbx_symtab): Replace current_gdbarch by objfile arch.
1862 (end_psymtab): Likewise.
1863 (process_one_symbol): Likewise.
1865 * mdebugread.c (parse_symbol): Replace current_gdbarch by objfile arch.
1866 (parse_procedure): Likewise.
1867 (parse_partial_symbols): Likewise.
1869 * somread.c (som_symtab_read): Replace current_gdbarch by objfile arch.
1871 * stabsread.c (define_symbol): Replace current_gdbarch by objfile arch.
1872 Replace static pcc_promotion_type and pcc_unsigned_promotion_type by
1874 (read_range_type): Replace current_gdbarch by objfile arch. Replace
1875 static range_index_type by built-in type.
1876 (read_one_struct_field): Replace current_gdbarch by objfile arch.
1877 (read_enum_type): Likewise.
1879 * xcoffread.c (read_xcoff_symtab): Replace current_gdbarch by
1882 2008-03-26 Vladimir Prus <vladimir@codesourcery.com>
1884 * varobj.h (varobj_floating_p): Declare.
1885 * varobj.c (varobj_floating_p): New.
1886 * mi/mi-cmd-var.c (mi_cmd_var_update): When passed
1887 '@' as the name, update all floating varobjs.
1889 2008-03-26 Vladimir Prus <vladimir@codesourcery.com>
1891 * varobj.c (struct varobj_root): Rename use_selected_frame to
1892 floating, and clarify the meaning.
1893 (varobj_create, varobj_update, new_root_variable): Adjust.
1894 (value_of_root): Don't use type_changed as in variable,
1896 (c_value_of_root): Adjust.
1898 2008-03-25 Pedro Alves <pedro@codesourcery.com>
1900 * linux-nat.c (linux_nat_attach): Add the pid we attached to, to
1902 (linux_nat_wait): Add main lwp to gdb's thread list.
1903 * linux-thread-db.c (find_new_threads_callback): Also attach to
1904 already listed threads which thread_db didn't know about yet.
1906 2008-03-25 Pedro Alves <pedro@codesourcery.com>
1908 * linux-nat.c (drain_queued_events): Fix comment typo.
1909 (linux_nat_attach): In async mode, don't rely on storing a pending
1910 status. Instead place the wait status on the pipe.
1911 (linux_nat_resume): Remove unreacheable shortcut code in async
1913 (stop_wait_callback): In async mode, don't store pending status.
1914 Instead, cancel breakpoints or resend the signal appropriatelly.
1915 (cancel_breakpoint): New, refactored from
1916 cancel_breakpoints_callback.
1917 (cancel_breakpoints_callback): Call cancel_breakpoint.
1918 (pipe_to_local_event_queue): Remove special token processing.
1919 (linux_nat_wait): Issue an internal error if a pending status is
1920 found in async mode.
1922 2008-03-24 Daniel Jacobowitz <dan@codesourcery.com>
1924 * inflow.c (gdb_has_a_terminal): Guard access to our_process_group.
1926 2008-03-24 Nick Roberts <nickrob@snap.net.nz>
1927 Vladimir Prus <vladimir@codesourcery.com>
1929 * varobj.c (struct varobj_root): New component thread_id.
1930 (varobj_get_thread_id, check_scope): New functions.
1931 (c_value_of_root): Use check_scope. Switch to the
1932 proper thread if necessary.
1934 * varobj.h (varobj_get_thread_id): New extern.
1936 * mi/mi-cmd-var.c (print_varobj): Add thread-id field.
1938 2008-03-23 Daniel Jacobowitz <dan@codesourcery.com>
1941 * top.c: Revert 2008-03-21 changes.
1943 2008-03-23 Vladimir Prus <vladimir@codesourcery.com>
1945 * thread.c (make_cleanup_restore_current_thread): Make it
1947 * gdbthread.h (make_cleanup_restore_current_thread): Declare.
1948 * varobj.c (varobj_update): Don't save/restore frame.
1949 (c_value_of_root): Save/restore thread and frame here,
1950 using make_cleanup_restore_current_thread.
1951 * Makefile.in: Update dependecies.
1953 2008-03-23 Vladimir Prus <vladimir@codesourcery.com>
1955 * varobj.c (struct varobj_root): Clarify
1956 comment on the frame field.
1957 (varobj_create): Don't set frame if we have no
1960 2008-03-21 Daniel Jacobowitz <dan@codesourcery.com>
1963 Suggested by Jan Kratochvil:
1964 * top.c (gdb_rl_operate_and_get_next_completion): Call
1965 rl_redisplay_function.
1966 (gdb_rl_redisplay): New.
1967 (init_main): Set rl_redisplay_function.
1969 2008-03-21 Thomas Mittelstaedt <T.Mittelstaedt@cadenas.de> (tiny change)
1971 * aix-thread.c (pdc_read_regs): Fix compiler warning.
1972 (pdc_write_regs, aix_thread_resume, fetch_regs_kernel_thread)
1973 (store_regs_kernel_thread): Likewise.
1975 2008-03-21 Pedro Alves <pedro@codesourcery.com>
1977 Linux native async support.
1979 * target.h (struct target_ops): Delete to_async_mask_value and add
1981 (target_is_async_p, target_async): Formatting.
1982 (target_async_mask_value): Delete.
1983 (target_async_mask): Delete function declaration, and add new
1984 target macro with the same name.
1986 * target.c (update_current_target): Replace to_async_mask_value by
1987 to_async_mask. Default to_async_mask to return_one.
1988 (target_async_mask): Delete.
1989 (find_default_can_async_p, find_default_is_async_p): New.
1990 (init_dummy_target): register find_default_can_async_p and
1991 find_default_is_async_p on the dummy target.
1993 * linux-nat.c: Include inf-loop.h, event-loop.h and event-top.h.
1994 (debug_linux_nat_async): New global.
1995 (show_debug_linux_nat_async): New function.
1996 (linux_nat_async_enabled, linux_nat_async_mask_value)
1997 (linux_nat_event_pipe, linux_nat_num_queued_events)
1998 (linux_nat_async_events_enabled): New globals.
1999 (struct waitpid_result): New struct.
2000 (waitpid_queue): New global.
2001 (queued_waitpid, push_waitpid, drain_queued_events): New.
2002 (my_waitpid): Call queued_waitpid.
2003 (linux_child_follow_fork): Disable async events during the call.
2004 (blocked_mask): Delete.
2005 (sync_sigchld_action, async_sigchld_action): New globals.
2006 (lin_lwp_attach_lwp): In sync mode, don't reblock SIGCHLD. In
2007 async mode, block events during the call.
2008 (linux_nat_create_inferior): New.
2009 (linux_nat_attach): In sync mode, restore the mask states. In
2010 async mode, wake the event loop immediatelly.
2011 (detach_callback): Drain all queued events of the lwp we're
2013 (linux_nat_detach): Block async mode, and drain events of the main
2015 (linux_nat_resume): If in async mode, mask async events during the
2016 call. If short circuiting, force event loop to wake up. If
2017 resuming, set target_executing, and register target events in the
2019 (pipe_to_local_event_queue, local_event_queue_to_pipe): New.
2020 (linux_nat_wait): In async mode, block events during the call.
2021 Only enable/disable passing SIGINT to the inferior in sync mode.
2022 Get events from local waitpid queue. If no interesting events was
2023 found, return to events loop. Reregister target events in the
2024 event loop on exit. In sync mode, no need to reblock SIGCHLD.
2025 (linux_nat_kill): Disable events on entry.
2026 (linux_nat_mourn_inferior): In sync mode, don't restore the masks
2027 here. Detach async mode from the event loop if there are no more
2028 forks available, otherwise leave it on.
2029 (sigchld_handler): Assure this is called only in sync mode.
2030 (linux_async_permitted, linux_async_permitted_1): New globals.
2031 (set_maintenance_linux_async_permitted)
2032 (show_maintenance_linux_async_permitted): New functions.
2033 (linux_nat_is_async_p, linux_nat_can_async_p)
2034 (linux_nat_async_mask): New.
2035 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push): New.
2036 (get_pending_events, async_sigchld_handler): New.
2037 (linux_nat_async_events): New.
2038 (async_terminal_is_ours): New global.
2039 (linux_nat_terminal_inferior, linux_nat_terminal_ours): New.
2040 (async_client_callback, async_client_context): New.
2041 (linux_nat_async_file_handler, linux_nat_async)
2042 (linux_nat_disable_async, linux_nat_enable_async): New.
2043 (linux_nat_add_target): Register linux_nat_create_inferior,
2044 linux_nat_can_async_p, linux_nat_is_async_p, linux_nat_async,
2045 linux_nat_async_mask, linux_nat_terminal_inferior and
2046 linux_nat_terminal_ours.
2047 (_initialize_linux_nat): Remove local action variable, and update
2048 code that used it to use sync_sigchld_action. Add new
2049 "lin-lwp-async" debug set/show command. Put the "lin-lwp" debug
2050 set/show command in the maintenance class. Add new "linux-async"
2051 maintenance set/show command. Block SIGCHLD by default. Setup
2052 async_sichld_action, and sync_sigchld_action. Install the default
2054 (lin_thread_get_thread_signals): Use a local sigset_t for blocking
2057 * linux-thread-db.c (re_check_for_thread_db): New.
2058 (clear_lwpid_callback): Handle TARGET_WAITKIND_IGNORE.
2059 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
2060 (thread_db_async_mask): New.
2061 (init_thread_db_ops): Register thread_db_can_async_p,
2062 thread_db_is_async_p, thread_db_async and thread_db_async_mask.
2064 * remote.c (remote_async_mask_value): New.
2065 (remote_return_zero): New.
2066 (init_remote_ops): Register remote_return_zero as callbacks of
2067 to_can_async_p and to_is_async_p.
2068 (remote_can_async_p, remote_is_async_p, remote_async): Update to
2069 use remote_async_mask_value.
2070 (remote_async_mask): New.
2071 (init_remote_async_ops): Remove to_async_mask_value setting and
2072 register remote_async_mask as to_async_mask callback in
2075 * Makefile.in (linux-nat.o): Update.
2077 2008-03-21 Daniel Jacobowitz <dan@codesourcery.com>
2079 * gdbthread.h (add_thread_with_info): New.
2080 * linux-thread-db.c: Add some documentation.
2081 (GET_LWP, GET_PID, GET_THREAD, is_lwp, is_thread, BUILD_LWP): Delete.
2082 (struct private_thread_info): Remove th_valid and ti_valid.
2083 Replace ti with tid.
2084 (thread_get_info_callback): Do not add TID to the new ptid. Do
2086 (thread_db_map_id2thr, lwp_from_thread): Delete functions.
2087 (thread_from_lwp): Assert that the LWP is set. Do not add TID to the
2089 (attach_thread): Handle an already-existing thread. Use
2090 add_thread_with_info. Cache the th and tid.
2091 (detach_thread): Verify that private was set. Remove verbose
2092 argument and printing. Update caller.
2093 (thread_db_detach): Do not adjust inferior_ptid.
2094 (clear_lwpid_callback, thread_db_resume, thread_db_kill): Delete.
2095 (check_event, find_new_threads_callback): Do not add TID to the new PTID.
2096 (thread_db_wait): Do not use lwp_from_thread.
2097 (thread_db_pid_to_str): Use the cached TID.
2098 (thread_db_extra_thread_info): Check that private is set.
2099 (same_ptid_callback): Delete.
2100 (thread_db_get_thread_local_address): Do not use it or check
2101 is_thread. Check that private is set. Assume that the thread
2102 handle is already cached.
2103 (init_thread_db_ops): Remove to_resume and to_kill.
2104 * thread.c (add_thread_with_info): New.
2105 (add_thread): Use it.
2106 * linux-nat.c (find_thread_from_lwp): Delete.
2107 (exit_lwp): Do not use it. Check print_thread_events. Print before
2108 deleting the thread.
2109 (GET_PID, GET_LWP, BUILD_LWP, is_lwp): Move to...
2110 * linux-nat.h (GET_PID, GET_LWP, BUILD_LWP, is_lwp): ...here.
2111 * inf-ttrace.c (inf_ttrace_wait): Use print_thread_events and
2112 printf_unfiltered for thread exits.
2113 * procfs.c (procfs_wait): Likewise.
2115 2008-03-21 Chris Demetriou <cgd@google.com>
2117 * symtab.c (rbreak_command): Quote symbol name before passing
2118 it to break_command.
2120 2008-03-21 Daniel Jacobowitz <dan@codesourcery.com>
2122 * eval.c (evaluate_subexp_for_address): Clarify error message.
2123 Use value_must_coerce_to_target.
2124 * infcall.c (value_arg_coerce): Call value_coerce_to_target.
2125 * valops.c (value_assign): Call value_coerce_to_target when
2126 assigning to anything but internalvars. Leave GDB-side arrays
2127 as arrays when assigning to internalvars.
2128 (value_must_coerce_to_target, value_coerce_to_target): New.
2129 (value_coerce_array, value_addr): Call value_coerce_to_target.
2130 (value_array): Create the array in GDB's memory instead of
2132 * value.h (value_must_coerce_to_target, value_coerce_to_target):
2135 2008-03-21 Daniel Jacobowitz <dan@codesourcery.com>
2137 * top.c (quit_confirm): Warn that we will kill the program.
2139 2008-03-19 Pedro Alves <pedro@codesourcery.com>
2141 * inflow.c (terminal_ours_1): Guard access to
2142 inferior_process_group with #ifdef PROCESS_GROUP_TYPE.
2144 2008-03-18 Ulrich Weigand <uweigand@de.ibm.com>
2145 Jim Blandy <jimb@codesourcery.com>
2146 Daniel Jacobowitz <drow@false.org>
2148 * dwarf2expr.h (struct dwarf_expr_context): Add ADDR_SIZE member.
2149 (dwarf2_read_address): Update prototype.
2151 * dwarf2expr.c (unsigned_address_type): Add ADDR_SIZE parameter.
2152 (signed_address_type): Likewise.
2153 (dwarf2_read_address): Replace BYTES_READ parameter with ADDR_SIZE.
2154 (execute_stack_op): Update calls to unsigned_address_type,
2155 signed_address_type and dwarf2_read_address. Fix implementation
2156 of DW_OP_deref_size.
2158 * dwarf2loc.h (dwarf2_per_cu_objfile): Add prototype.
2159 (dwarf2_per_cu_addr_size): Likewise.
2160 (struct dwarf2_locexpr_baton): Replace OBJFILE with PER_CU.
2161 (struct dwarf2_loclist_baton): Likewise.
2163 * dwarf2loc.c (find_location_expression): Update calls to
2164 dwarf2_read_address. Use dwarf2_per_cu_objfile and
2165 dwarf2_per_cu_addr_size to retrieve PER_CU parameters.
2166 (locexpr_describe_location): Likewise.
2167 (dwarf2_evaluate_loc_desc): Replace OBJFILE with PER_CU parameter.
2168 Set ctx->addr_size to dwarf2_per_cu_addr_size (per_cu).
2169 (dwarf2_loc_desc_needs_frame): Add PER_CU parameter. Set ctx->addr_size
2170 to dwarf2_per_cu_addr_size (per_cu).
2171 (locexpr_read_variable): Update dwarf2_evaluate_loc_desc call.
2172 (loclist_read_variable): Likewise.
2173 (locexpr_read_needs_frame): Update dwarf2_loc_desc_needs_frame call.
2175 * dwarf2read.c (dwarf2_symbol_mark_computed): Set baton->per_cu
2176 instead of baton->objfile.
2177 (dwarf2_per_cu_obfile): New function.
2178 (dwarf2_per_cu_addr_size): Likewise.
2180 * dwarf2-frame.c (struct comp_unit): Move higher.
2181 (struct dwarf2_cie): Add UNIT and ADDR_SIZE members.
2182 (execute_stack_op): Add ADDR_SIZE parameter; set ctx->addr_size.
2183 (execute_cfa_program): Add FDE parameter. Replace EH_FRAME_P
2184 parameter by using fde->eh_frame_p. Use read_encoded_value
2185 to implement DW_CFA_set_loc.
2186 (struct dwarf2_frame_cache): Add ADDR_SIZE member.
2187 (dwarf2_frame_cache): Set cache->addr_size. Update calls to
2188 execute_stack_op and execute_cfa_program.
2189 (dwarf2_frame_prev_register): Update calls to execute_stack_op.
2190 (size_of_encoded_value): Remove.
2191 (read_encoded_value): Add PTR_LEN and FUNC_BASE parameters.
2192 Remove call to size_of_encoded_value. Implement DW_EH_PE_funcrel.
2193 (add_cie): Set cie->unit backlink.
2194 (decode_frame_entry_1): Set cie->addr_size. Update calls to
2196 (dwarf2_build_frame_info): Allocate UNIT on objfile obstack.
2198 2008-03-17 Markus Deuling <deuling@de.ibm.com>
2200 * i386-tdep.c (i386_print_insn): Remove unnecessary call to
2201 gdbarch_bfd_arch_info.
2203 2008-03-17 Joel Brobecker <brobecker@adacore.com>
2205 * aix-thread.c (pdc_read_regs): Minor reformatting.
2207 2008-03-17 Vladimir Prus <vladimir@codesourcery.com>
2209 * thread.c (print_thread_info): Don't insist
2210 on having current thread if there are no
2213 2008-03-17 Pedro Alves <pedro@codesourcery.com>
2215 * infcmd.c (attach_command_post_wait)
2216 (attach_command_continuation): New.
2217 (attach_command): Support background async execution, and async
2218 execution in synchronous mode.
2220 2008-03-17 Daniel Jacobowitz <dan@codesourcery.com>
2222 * stack.c (print_stack_frame, print_frame): Use RETURN_MASK_ERROR.
2223 * symmisc.c (dump_symtab_1): Likewise.
2224 * wrapper.c (gdb_value_struct_elt): Likewise.
2226 2008-03-17 Pedro Alves <pedro@codesourcery.com>
2228 * linux-nat.c (linux_nat_filter_event): Fix comment typo.
2230 2008-03-17 Pedro Alves <pedro@codesourcery.com>
2232 * linux-nat.c (linux_nat_filter_event): New, refactored from
2234 (linux_nat_wait): Call linux_nat_filter_event.
2236 2008-03-17 Ulrich Weigand <uweigand@de.ibm.com>
2238 * top.c (execute_command): Fix uninitialized variable error.
2240 2008-03-16 Nick Hudson <nick.hudson@dsl.pipex.com>
2242 * Makefile.in (amd64nbsd-nat.o): New dependency.
2243 * amd64nbsd-nat.c: Include "nbsd-nat.h".
2244 (_initialize_amd64nbsd_nat): Update target vector to use
2245 nbsd_pid_to_exec_file.
2246 * config/i386/nbsd64.mh (NATDEPFILES): Add nbsd-nat.o.
2248 2008-03-15 Vladimir Prus <vladimir@codesourcery.com>
2250 Remove ignoring leading exec events code.
2251 * fork-child.c (startup_inferior): Do not set
2252 inferior_ignoring_leading_exec_events.
2253 * inf-child.c (inf_child_reported_exec_events_per_exec_call): Remove.
2254 (inf_child_target): Do not set to_reported_exec_events_per_exec_call.
2255 * infrun.c (inferior_ignoring_leading_exec_events): Remove.
2256 (handle_inferior_event): Remove code for ignoring leading exec
2258 * target.c (update_current_target): Do not inherit, or default,
2259 to_reported_exec_events_per_exec_call.
2260 (debug_to_reported_exec_events_per_exec_call): Remove.
2261 (setup_target_debug): Do not set to_reported_exec_events_per_exec_call.
2262 * target.h (target_reported_exec_events_per_exec_call): Remove.
2263 (struct target): Remove the to_reported_exec_events_per_exec_call
2266 2008-03-15 Vladimir Prus <vladimir@codesourcery.com>
2268 Implement -thread-info.
2269 * gdbthread.h (print_thread_info): Declare.
2271 * thread.c (print_thread_info): New, extracted
2272 from info_threads_command and adjusted to
2273 work for CLI and MI.
2274 (info_threads_command): Use print_thread_info.
2275 * Makefile.in: Update dependencies.
2277 * mi/mi-cmds.c (mi_cmds): Specify a handler
2279 * mi/mi-cmds.h (mi_cmd_thread_info): Declare.
2280 * mi/mi-main.c (mi_cmd_thread_info): New.
2281 (mi_cmd_list_features): Include 'thread-info'.
2283 2008-03-14 Kevin Buettner <kevinb@redhat.com>
2285 * mips-tdep.c (mips32_scan_prologue): Use the ABI register size
2286 to decide whether to match instruction patterns using "sw" and "sd".
2288 2008-03-14 Pedro Alves <pedro@codesourcery.com>
2290 * infcmd.c (jump_command): Postpone disabling stdin until after
2293 2008-03-14 Pedro Alves <pedro@codesourcery.com>
2295 * inflow.c (gdb_getpgrp): New.
2296 (gdb_has_a_terminal): Use get_getpgrp.
2297 (terminal_ours_1): If attach_flag is set, don't refetch
2298 inferior_process_group.
2300 2008-03-14 Pedro Alves <pedro@codesourcery.com>
2302 * features/library-list.dtd: Allow "section" elements as children
2303 of "library". Add "section" element and describe its attributes.
2305 * solib-target.c (struct lm_info): Add section_bases member.
2306 (library_list_start_segment): Error out if seen a section element.
2307 (library_list_start_section): New.
2308 (library_list_end_library): New.
2309 (solib_target_free_library_list): Free section_bases.
2310 (section_attributes): New.
2311 (library_children): Make "segment" optional. Add "section" child.
2312 (library_list_children): Register library_list_end_library.
2313 (solib_target_relocate_section_addresses): Handle section bases.
2315 * NEWS: Mention new qXfer:libraries:read section offsets support.
2317 2008-03-14 Vladimir Prus <vladimir@codesourcery.com>
2319 * defs.h (do_exec_error_cleanups, discard_exec_error_cleanups)
2320 (make_exec_error_cleanup): Remove declarations.
2321 * utils.c (exec_error_cleanup_chain): Remove.
2322 (do_exec_error_cleanups, discard_exec_error_cleanups)
2323 (make_exec_error_cleanup): Remove.
2324 * event-loop.c (start_event_loop): Adjust call to
2326 * event-top.c (async_enable_stdin): Remove the paramater dummy.
2327 (async_disable_stdin): Don't register async_enable_stdin via
2329 * inf-loop.c (inferior_event_handler): Don't
2330 call do_exec_error_cleanups. Call async_enable_stdin instead.
2331 * event-loop.c (start_event_loop): Adjust call to
2333 * tui/tui-interp.c (tui_command_loop): Adjust call to
2336 2008-03-14 Vladimir Prus <vladimir@codesourcery.com>
2339 * Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
2340 * breakpoint.c (bpstat_do_actions): In async mode,
2341 don't jump to top expecting stop_bpstat to be already
2343 * event-loop.c (start_event_loop): Call async_enable_stdin
2345 * event-top.c (async_enable_stdin): Do nothing if sync_execution
2347 (command_handler): Do not setup continuation here.
2348 (command_line_handler_continuation): Move to...
2349 * top.c (command_line_handler_continuation): ... here.
2350 (execute_command): In async mode, register continuation.
2351 Don't check frame's language in running in async mode.
2352 * exceptions.c (throw_exception): Don't do exec_error_cleanups.
2353 * inf-loop.c (complete_execution): Inline into...
2354 (inferior_event_handler): ... here. Clear target_executing before
2355 doing any cleanups. Don't try to show prompt if the target was
2357 * infcmd.c (signal_command): Add support for async mode.
2358 (finish_command): Only add continuation if the target was
2359 successfully resumed.
2360 * remote.c (init_async_opts): Register to_get_thread_local_address
2362 * mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
2363 with sync_execution.
2364 * tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
2367 2008-03-14 Daniel Jacobowitz <dan@codesourcery.com>
2369 * corefile.c (reopen_exec_file): Use exec_bfd_mtime.
2370 * exec.c (exec_bfd_mtime): Define.
2371 (exec_close): Clear it.
2372 (exec_file_attach): Set it.
2373 * gdbcore.h (exec_bfd_mtime): Declare.
2374 * source.c (find_source_lines): Do not use bfd_get_mtime.
2376 2008-03-14 Vladimir Prus <vladimir@codesourcery.com>
2378 * top.c (simplified_command_loop): Remove.
2380 2008-03-14 Vladimir Prus <vladimir@codesourcery.com>
2382 Remove unused remote.c hooks.
2383 * remote.c (deprecated_target_resume_hook)
2384 (deprecated_target_wait_loop_hook): Remove.
2385 (remote_resume): Do not call deprecated_target_resume_hook.
2386 (remote_wait): Do not call deprecated_target_wait_loop_hook.
2387 (remote_async_wait): Likewise.
2389 2008-03-14 Vladimir Prus <vladimir@codesourcery.com>
2391 Implement MI notification for new threads.
2392 * doc/observer.texi (new_thread): Document.
2393 * observer.sh: Forward declare struct thread_info.
2394 * thread.c (add_thread): Notify observer.
2396 * interps.h (interp_init_ftype): New parameter
2398 (interp_set): Likewise.
2399 (top_level_interpreter_data): Declare.
2400 * interps.c (interp_set): New parameter top_level.
2401 Pass it to interpreter's init function. Remember
2402 top level interpreter.
2403 (interpreter_exec_cmd): Adjust.
2404 (top_level_interpreter_data): New.
2405 * main.c (captured_main): Pass 1 for top_level
2406 parameter of interp_set.
2407 * cli/cli-interp.c (cli_interpreter_init): New
2408 parameter top_level.
2409 * tui/tui-interp.c (tui_init): New parameter top_level.
2411 * mi/mi-interp.c (mi_new_thread): New.
2412 (mi_interpreter_init): If top level, register
2413 observer for new threads.
2415 * Makefile.in (mi-interp.o, thread.o): Update dependencies.
2417 2008-03-14 Pedro Alves <pedro@codesourcery.com>
2419 * top.c (execute_command): Disable break and stop
2420 commands in async mode.
2422 2008-03-14 Pedro Alves <pedro@codesourcery.com>
2425 2008-03-14 Pedro Alves <pedro@codesourcery.com>
2426 * inf-loop.c (inferior_event_handler): Don't include remote.h.
2427 Call target_stop in the INF_QUIT_REQ case.
2428 * Makefile.in (inf-loop.o): Update.
2430 2008-03-14 Pedro Alves <pedro@codesourcery.com>
2432 * inf-loop.c (inferior_event_handler): Don't include remote.h.
2433 Call target_stop in the INF_QUIT_REQ case.
2434 * Makefile.in (inf-loop.o): Update.
2436 2008-03-14 Pedro Alves <pedro@codesourcery.com>
2438 * top.c (execute_command): Enable break, info and interrupt
2439 commands in async mode.
2441 2008-03-13 Vladimir Prus <vladimir@codesourcery.com>
2442 Daniel Jacobowitz <dan@codesourcery.com>
2444 * breakpoint.h (breakpoint_restore_shadows): New
2446 * breakpoint.c (breakpoint_restore_shadows): New.
2447 (read_memory_nobpt): Delete.
2448 * gdbcore.h (read_memory_nobpt): Delete declaration.
2449 * target.c (memory_xfer_partial): Call
2450 breakpoint_restore_shadows.
2451 (restore_show_memory_breakpoints)
2452 (make_show_memory_beakpoints_cleanup): New.
2453 (show_memory_breakpoints): New.
2454 * target.h (make_show_memory_beakpoints_cleanup): Declare.
2455 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint):
2456 Make sure we see memory breakpoints when checking if
2457 breakpoint is still there.
2458 * alpha-tdep.c, alphanbsd-tdep.c, frame.c, frv-tdep.c,
2459 hppa-linux-tdep.c, hppa-tdep.c, i386-linux-nat.c, i386-tdep.c,
2460 m68klinux-tdep.c, mips-tdep.c, mn10300-tdep.c, s390-tdep.c,
2461 sparc-tdep.c: Use target_read_memory instead of read_memory_nobpt.
2463 2008-03-12 Pedro Alves <pedro@codesourcery.com>
2465 * thread.c (add_thread): Use printf_unfiltered to print.
2467 2008-03-12 Joel Brobecker <brobecker@gnat.com>
2469 * sol-thread.c: Replace use of TM_I386SOL2_H by an expression
2470 that is true only on x86-solaris and x86_64-solaris.
2471 * procfs.c: Likewise. Move procfs_find_LDT_entry up together
2472 with proc_get_LDT_entry.
2474 2008-03-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
2476 * configure.ac (AC_CHECK_FUNCS): Add check for setsid.
2477 * config.in, configure: Regenerate.
2478 * fork-child.c (fork_inferior): Call create_tty_session.
2479 * inflow.c (new_tty): Set controlling terminal with TIOCSCTTY.
2480 (create_tty_session): New function.
2481 * terminal.h: Declare create_tty_session.
2483 2008-03-12 Alan Modra <amodra@bigpond.net.au>
2486 * elfread.c (elf_symtab_read): Make shndx an unsigned int.
2487 * mipsread.c: Include elf/internal.h.
2488 (read_alphacoff_dynamic_symtab): Map external reserved sym_shndx
2491 2008-03-11 Markus Deuling <deuling@de.ibm.com>
2493 * win32-nat.c (do_win32_fetch_inferior_registers): Use get_regcache_arch
2494 to get at the current architecture and at the target specific vector.
2495 Add target specific vector to I387_FISEG_REGNUM and I387_FOP_REGNUM and
2496 remove define of I387_ST0_REGNUM.
2498 * amd64-tdep.c (I387_ST0_REGNUM): Remove define.
2500 (amd64_supply_fxsave, amd64_collect_fxsave): Use get_regcache_arch to
2501 get at the current architecture
2502 (I387_FISEG_REGNUM, I387_FOSEG_REGNUM): Add target specific vector as
2505 * i386-tdep.c: Remove various define's and undef's of I387_ST0_REGNUM,
2506 I387_NUM_XMM_REGS and I387_MM0_REGNUM.
2508 (I387_NUM_XMM_REGS, I387_XMM0_REGNUM, I387_MXCSR_REGNUM,
2509 I387_ST0_REGNUM, I387_FCTRL_REGNUM, I387_MM0_REGNUM,
2510 (I387_FSTAT_REGNUM): Add target specific vector as parameter.
2512 (i386_register_name, i386_dbx_reg_to_regnum): Use gdbarch_tdep to get
2513 at the target specific vector.
2515 (i386_get_longjmp_target): Use get_frame_arch to get at the current
2516 architecture. Use gdbarch_tdep to get at the target specific vector.
2518 (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as parameter and
2519 update caller. Use gdbarch_tdep to get at the target specific vector.
2521 (i386_register_to_value: Use get_frame_arch to get at the current
2524 * i386-tdep.h (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as
2527 * i387-tdep.c (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
2528 I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM
2529 I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_ST0_REGNUM, FSAVE_ADDR,
2530 FXSAVE_ADDR, I387_XMM0_REGNUM): Add target specific vector as parameter.
2532 (I387_ST0_REGNUM, I387_NUM_XMM_REGS): Remove various define's and
2535 (i387_convert_register_p, i387_register_to_value,
2536 i387_value_to_register): Update call for i386_fp_regnum_p.
2538 * i387-tdep.h: Remove comment.
2539 (I387_ST0_REGNUM, I387_NUM_XMM_REGS, I387_MM0_REGNUM): Add define.
2540 (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
2541 I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM,
2542 I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_XMM0_REGNUM,
2543 I387_MXCSR_REGNUM): Add target specific vector as parameter.
2545 2008-03-10 Daniel Jacobowitz <dan@codesourcery.com>
2547 * Makefile.in (fork-child.o): Update.
2548 * NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
2549 argument. Gather all gdbserver features together.
2550 * fork-child.c (exec_wrapper): New variable.
2551 (fork_inferior): Use it.
2552 (startup_inferior): Skip an extra trap if using "set exec-wrapper".
2553 (unset_exec_wrapper_command, _initialize_fork_child): New.
2555 2008-03-10 Hidetaka Takano <hidetaka.takano@glb.toshiba.co.jp>
2557 * source.c (directory_command): Modify the determination of
2558 condition of terminal "from_tty".
2560 2008-03-10 Matt Rice <ratmice@gmail.com>
2562 * dwarf2read.c (set_cu_language): Add DW_LANG_ObjC.
2564 2008-03-10 Hidetaka Takano <hidetaka.takano@glb.toshiba.co.jp>
2566 * spu-tdep.c (info_spu_event_command): Insert a '\0' to the end
2567 of the data passing to strtoulst function.
2568 (info_spu_signal_command): Likewise.
2570 2008-03-08 Vladimir Prus <vladimir@codesourcery.com>
2572 * mi/mi-interp.c (mi_command_loop): Remove
2575 2008-03-07 Joel Brobecker <brobecker@adacore.com>
2577 * remote.c (extended_remote_attach_1): Make local variable pid an int
2580 2008-03-07 Joel Brobecker <brobecker@adacore.com>
2582 * solib-svr4.c (svr4_same_1): New function, originally extracted
2583 from svr4_same and expanded to handle the sparc64 case.
2584 (svr4_same): Move up and reimplement using svr4_same_1.
2585 (enable_break): Use svr4_same_1 to do shared library name comparisons.
2587 2008-03-07 Ramana Radhakrishnan <ramana.r@gmail.com>
2589 * MAINTAINERS: Move self to Paper trail.
2591 2008-03-05 Daniel Jacobowitz <dan@codesourcery.com>
2593 * Makefile.in (mingw-hdep.o, posix-hdep.o, remote-fileio.o): Update.
2594 * event-loop.c (call_async_signal_handler): New.
2595 * event-loop.h (call_async_signal_handler)
2596 (gdb_call_async_signal_handler): Declare.
2597 (mark_async_signal_handler): Add comments.
2598 * event-top.c (handle_sigint): Use gdb_call_async_signal_handler.
2599 * mingw-hdep.c (sigint_event, sigint_handler): New.
2600 (gdb_select): Use them. Wait for the readline signal handler
2602 (gdb_call_async_signal_handler, _initialize_mingw_hdep): New functions.
2603 * posix-hdep.c (gdb_call_async_signal_handler): New function.
2604 * remote-fileio.c (sigint_fileio_token, async_remote_fileio_interrupt):
2606 (remote_fileio_ctrl_c_signal_handler): Use
2607 gdb_call_async_signal_handler.
2608 (initialize_remote_fileio): Initialize sigint_fileio_token.
2609 * remote.c (initialize_sigint_signal_handler, handle_remote_sigint): Do
2610 not initialize tokens here.
2611 (handle_remote_sigint_twice): Likewise. Reinstall
2612 handle_remote_sigint.
2613 (async_remote_interrupt_twice): Just call interrupt_query.
2614 (cleanup_sigint_signal_handler): Do not delete tokens.
2615 (remote_interrupt, remote_interrupt_twice): Use
2616 gdb_call_async_signal_handler.
2617 (interrupt_query): Reinstall the default signal handler.
2618 (_initialize_remote): Initialize tokens here.
2620 2008-03-04 Joel Brobecker <brobecker@adacore.com>
2622 * features/rs6000/power-core.xml, features/rs6000/power64-core.xml,
2623 features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
2624 Change the type of the lr register to code_ptr.
2625 * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
2626 features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
2627 features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
2628 features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
2629 features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
2630 features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
2631 features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: Regenerate.
2633 2008-03-03 James E. Wilson <wilson@tuliptree.org>
2635 * MAINTAINERS: Update my email address.
2637 2008-03-03 Keith Seitz <keiths@redhat.com>
2639 From Dave Murphy <davem@devkitpro.org>:
2640 * configure.ac: Set tcl configdir to win under mingw.
2641 * configure: Regenerate.
2643 2008-03-03 Daniel Jacobowitz <dan@codesourcery.com>
2645 * breakpoint.c (fetch_watchpoint_value): New function.
2646 (update_watchpoint): Set and clear val_valid. Use
2647 fetch_watchpoint_value. Handle unreadable values on the
2648 value chain. Correct check for user-requested array watchpoints.
2649 (breakpoint_init_inferior): Clear val_valid.
2650 (watchpoint_value_print): New function.
2651 (print_it_typical): Use it. Do not free or clear old_val. Print
2652 watchpoints even if old_val == NULL.
2653 (watchpoint_check): Use fetch_watchpoint_value. Check for values
2654 becoming readable or unreadable.
2655 (watch_command_1): Use fetch_watchpoint_value. Set val_valid.
2656 (do_enable_watchpoint): Likewise.
2657 * breakpoint.h (struct breakpoint): Update comment for val. Add
2659 * NEWS: Mention watchpoints on inaccessible memory.
2661 2007-02-29 Daniel Jacobowitz <dan@codesourcery.com>
2663 * Makefile.in (i386-nat.o): Update.
2664 * amd64-linux-nat.c (_initialize_amd64_linux_nat): Call
2665 i386_use_watchpoints.
2666 * i386-linux-nat.c (_initialize_i386_linux_nat): Call
2667 i386_use_watchpoints.
2668 * i386-nat.c (i386_stopped_data_address): Take two arguments.
2669 (i386_stopped_by_watchpoint): Update call.
2670 (i386_can_use_hw_breakpoint, i386_use_watchpoints): New.
2671 * config/i386/nm-i386.h: Conditionalize definitions on
2672 ! I386_WATCHPOINTS_IN_TARGET_VECTOR.
2673 (i386_use_watchpoints): Declare.
2674 (i386_stopped_data_address): Update.
2675 * config/i386/nm-linux.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
2676 * config/i386/nm-linux64.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
2678 2008-02-29 Joel Brobecker <brobecker@adacore.com>
2680 GDB 6.8 branch created (branch timestamp: 2008-02-26 10:00 UTC)
2681 * version.in: Bump version to 6.8.50.20080229-cvs.
2683 2008-02-28 Markus Deuling <deuling@de.ibm.com>
2685 * f-typeprint.c (f_print_type): Handle NULL pointer in VARSTRING
2688 2008-02-28 Tom Tromey <tromey@redhat.com>
2690 * infcmd.c (notice_args_read): Print result of get_inferior_args.
2692 2008-02-28 Daniel Jacobowitz <dan@codesourcery.com>
2694 * infcmd.c (kill_if_already_running): Make static. Use
2695 target_require_runnable.
2696 * target.c (target_require_runnable): New.
2697 * target.h (target_require_runnable): Declare.
2699 2008-02-28 Daniel Jacobowitz <dan@codesourcery.com>
2701 * frame.c (reinit_frame_cache): Only annotate if frames were
2704 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
2706 * regformats/reg-ppc.dat: Rename "ps" to "msr".
2707 * regformats/reg-ppc64.dat: Likewise.
2709 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
2711 * features/Makefile (%.dat): Emit xmltarget statement.
2713 * regformats/regdat.sh: Support xmltarget and xmlarch statments.
2714 Generate code to set gdbserver_xmltarget in init_registers_${name}.
2716 * regformats/arm-with-iwmmxt.dat: Regenerate.
2717 * regformats/mips64-linux.dat: Regenerate.
2718 * regformats/mips-linux.dat: Regenerate.
2719 * regformats/rs6000/powerpc-32.dat: Regenerate.
2720 * regformats/rs6000/powerpc-64.dat: Regenerate.
2721 * regformats/rs6000/powerpc-e500.dat: Regenerate.
2723 * regformats/reg-arm.dat: Add xmlarch statement.
2724 * regformats/reg-i386.dat: Likewise.
2725 * regformats/reg-i386-linux.dat: Likewise.
2726 * regformats/reg-x86-64-linux.dat: Likewise.
2727 * regformats/reg-spu.dat: Likewise.
2729 2008-02-27 Daniel Jacobowitz <dan@codesourcery.com>
2731 * remote.c (remote_wait, remote_async_wait): Stop if we receive
2734 2008-02-27 Daniel Jacobowitz <dan@codesourcery.com>
2736 * utils.c (debug_timestamp): New.
2737 (vfprintf_unfiltered): Print timestamps if requested.
2738 (show_debug_timestamp): New.
2739 (initialize_utils): Register "set debug timestamp".
2740 * NEWS: Mention "set debug timestamp". Add GDB 6.8 section.
2742 2008-02-27 Joel Brobecker <brobecker@adacore.com>
2744 * breakpoint.c (skip_prologue_sal): New function.
2745 (resolve_sal_pc): Adjust SAL past prologue if the SAL was
2746 computed from a line number.
2748 2008-02-27 Joel Brobecker <brobecker@adacore.com>
2750 * features/rs6000/power-core.xml, features/rs6000/power64-core.xml
2751 features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
2752 Set PC register type to "code_ptr".
2753 * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
2754 features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
2755 features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
2756 features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
2757 features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
2758 features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
2759 features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c:
2762 2008-02-27 Ulrich Weigand <uweigand@de.ibm.com>
2764 * regformats/regdat.sh: Rename init_registers function in
2765 generated file to init_registers_${name}.
2767 * regformats/reg-crisv32.dat: Set "name" to crisv32.
2768 * regformats/reg-ppc64.dat: Set "name" to ppc64.
2769 * regformats/reg-s390x.dat: Set "name" to s390x.
2771 2008-02-26 Greg Law <glaw@undo-software.com>
2773 * regcache.c (registers_changed): Call reinit_frame_cache.
2775 2008-02-26 Daniel Jacobowitz <dan@codesourcery.com>
2777 * configure.tgt (sh-*-linux*): Match sh*. Add glibc-tdep.o.
2778 * sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver
2779 and svr4_fetch_objfile_link_map.
2780 * Makefile.in (sh-linux-tdep.o): Update.
2782 2008-02-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
2784 * amd64-tdep.c (amd64_classify): Add support for decimal float
2786 * i386-tdep.c (i386_return_value): Make 128-bit decimal float
2787 use the struct return convention.
2789 2008-02-26 Nick Roberts <nickrob@snap.net.nz>
2791 * breakpoint.c (print_one_breakpoint_location): Revert Enb field
2792 to old format. Discard breakpoint address if shared library is
2794 (breakpoint_1): Adjust formatting of table header accordingly.
2796 2008-02-25 Vladimir Prus <vladimir@codesourcery.com>
2798 * remote.c (remote_get_threadlist): If the response
2799 is empty, don't try to parse it.
2801 2008-02-23 Vladimir Prus <vladimir@codesourcery.com>
2803 Unbreak 'target async'.
2804 * serial.c (serial_async): Set the
2805 handler function before enabling async
2808 2008-02-22 Daniel Jacobowitz <dan@codesourcery.com>
2810 * solib-svr4.c (enable_break): Convert r_brk to a code address.
2812 2008-02-21 Pedro Alves <pedro@codesourcery.com>
2814 * remote.c (extended_remote_attach_1): Set attach_flag.
2815 (extended_remote_create_inferior_1): Clear attach_flag.
2817 2008-02-20 Daniel Jacobowitz <dan@codesourcery.com>
2819 * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Set
2821 (mipsnbsd_lp64_fetch_link_map_offsets): Likewise.
2822 * solib-svr4.c (solib_svr4_r_brk): New.
2823 (open_symbol_file_object, svr4_current_sos): Always check the
2825 (svr4_fetch_objfile_link_map): Do not set debug_base.
2826 (enable_break): Use r_brk if it is set.
2827 (svr4_ilp32_fetch_link_map_offsets): Set r_brk_offset.
2828 (svr4_lp64_fetch_link_map_offsets): Likewise.
2829 * solib-svr4.h (struct link_map_offsets): Add r_brk_offset.
2831 2008-02-20 Markus Deuling <deuling@de.ibm.com>
2832 Mark Kettenis <kettenis@gnu.org>
2834 * alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by
2835 trad_frame_saved_reg.
2836 (trad-frame.h): New include.
2838 (alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs
2839 instead of frame_obstack_zalloc.
2840 (alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register.
2842 * Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h.
2844 2008-02-20 Markus Deuling <deuling@de.ibm.com>
2846 * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess
2847 from disassemble_info instead of gdbarch_byte_order.
2849 * mips-tdep.c (gdb_print_insn_mips): Likewise.
2850 * arm-tdep.c (gdb_print_insn_arm): Likewise.
2852 2008-02-20 Markus Deuling <deuling@de.ibm.com>
2854 * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add
2855 gdbarch as parameter.
2857 * gdbarch.{c,h}: Regenerate.
2859 * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as
2861 * mem-break.c (default_memory_insert_breakpoint)
2862 (default_memory_remove_breakpoint): Likewise.
2863 * target.h (default_memory_remove_breakpoint)
2864 (default_memory_insert_breakpoint): Likewise.
2866 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as
2867 parameter. Replace current_gdbarch by gdbarch.
2868 * m32r-tdep.c (m32r_memory_insert_breakpoint)
2869 (m32r_memory_remove_breakpoint): Likewise.
2871 2008-02-19 Daniel Jacobowitz <dan@codesourcery.com>
2873 * MAINTAINERS: Add Vladimir Prus as MI maintainer.
2875 2008-02-19 Joel Brobecker <brobecker@adacore.com>
2877 * NEWS: Add entry describing Add support improvements.
2879 2008-02-18 Markus Deuling <deuling@de.ibm.com>
2881 * m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by
2884 2008-02-18 Markus Deuling <deuling@de.ibm.com>
2886 * sentinel-frame.c (sentinel_frame_prev_register): Do not call
2887 register_offset_hack anymore.
2889 * regcache.{c,h} (register_offset_hack): Remove.
2891 2008-02-18 Markus Deuling <deuling@de.ibm.com>
2893 * hppa-tdep.h (find_global_pointer): Add gdbarch as parameter.
2895 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace
2896 current_gdbarch by gdbarch.
2897 (hppa64_hpux_find_global_pointer): Likewise.
2898 * hppa-tdep.c (hppa_find_global_pointer): Likewise.
2899 (hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for
2900 find_global_pointer.
2902 * hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as
2904 * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
2906 * hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead
2907 of gdbarch_num_regs.
2909 * hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and
2910 replace current_gdbarch by gdbarch.
2911 (hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr.
2913 2008-02-18 Markus Deuling <deuling@de.ibm.com>
2915 * rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter
2916 and replace current_gdbarch by gdbarch.
2918 (store_register): Update call for exec_one_dummy_insn.
2919 (fetch_register, store_register): Update call of regmap.
2921 * ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as
2922 parameter and replace current_gdbarch by gdbarch.
2924 (ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at
2925 the current architecture. Update call for getregs_supplies and
2927 (ppcnbsd_fetch_inferior_registers): Likewise.
2929 * ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and
2930 replace current_gdbarch by gdbarch.
2931 (ppcobsd_fetch_registers, ppcobsd_store_registers): Use
2932 get_regcache_arch to get at the current architecture. Update call for
2935 2008-02-18 Markus Deuling <deuling@de.ibm.com>
2937 * arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch
2940 2008-02-15 Markus Deuling <deuling@de.ibm.com>
2942 * mips-linux-tdep.c (mips_linux_init_abi): Remove internal error.
2944 2008-02-14 Vladimir Prus <vladimir@codesourcery.com>
2946 * NEWS: Mention pending breakpints in MI.
2948 2008-02-14 Markus Deuling <deuling@de.ibm.com>
2950 * Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o.
2952 2008-02-13 Markus Deuling <deuling@de.ibm.com>
2954 Add script to build and test GDB using enable-targets=all.
2956 * gdb_buildall.sh: New file.
2958 2008-02-11 Maxim Grigoriev <maxim2405@gmail.com>
2960 * NEWS (New native configurations): Xtensa GNU/Linux.
2961 (New targets): Xtensa GNU/Linux.
2962 * Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
2964 (ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
2965 (xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
2966 * configure.tgt (xtensa*-*-linux*): New entry.
2967 * xtensa-config.c (xtensa_tdep): New variable.
2968 (xtensa_config_byte_order, xtensa_config_tdep): Removed.
2969 (rmap): Change format based on new macro XTREG.
2970 (XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
2971 * xtensa-linux-nat.c: New.
2972 * xtensa-linux-tdep.c: New.
2973 * xtensa-xtregs.c: New.
2974 * xtensa-tdep.h (xtensa_elf_gregset_t): Update.
2975 (XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
2976 (XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
2977 (xtensa_register_t): New field coprocessor.
2978 (XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
2979 * xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
2980 (xtensa_pseudo_register_read, xtensa_pseudo_register_write):
2981 Update to handle privileged registers.
2982 (xtensa_supply_gregset) Remove exccause and excvaddr registers.
2983 (xtensa_push_dummy_call): Set windowstart register correctly.
2984 (call0_analyze_prologue): Initialize xtensa_default_isa.
2985 (xtensa_derive_tdep): New.
2986 (xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
2987 xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
2988 Call xtensa_derive_tdep().
2989 * config/xtensa/linux.mh: New.
2990 * regformats/reg-xtensa.dat: New.
2992 2008-02-09 Aleksandar Ristovski <aristovski@qnx.com> (tiny change)
2994 * corelow.c (core_open): Use IS_ABSOLUTE_PATH.
2995 (filenames.h): New include.
2996 * Makefile.in (corelow.o): Add dependency for filenames.h.
2998 2008-02-08 Doug Evans <dje@google.com>
3000 * source.c (find_and_open_source): Always rewrite absolute filenames.
3002 2008-02-07 Doug Evans <dje@google.com>
3004 * breakpoint.c: #include "hashtab.h".
3005 (ambiguous_names_p): New fn.
3006 (update_breakpoint_locations): When restoring bp enable status, don't
3007 compare function names if any functions have same name.
3008 * Makefile.in (breakpoint.o): Add hashtab.h dependency.
3010 2008-02-07 Joel Brobecker <brobecker@adacore.com>
3012 * ada-lang.c (symbol_completion_add): Make SV parameter a VEC**
3013 instead of just a VEC*. Update use of SV.
3014 (ada_make_symbol_completion_list): Update symbol_completion_add calls.
3016 2007-02-07 Joel Brobecker <brobecker@adacore.com>
3018 * NEWS: Put all new commands since gdb-6.7 together.
3020 2007-02-07 Joel Brobecker <brobecker@adacore.com>
3022 * ada-lang.c: #include "vec.h".
3023 (struct string_vector, new_string_vector, string_vector_append):
3025 (char_ptr): New typedef.
3026 (DEF_VEC_P (char_ptr)): New VEC type.
3027 (symbol_completion_add): Update profile to take the new VEC type
3028 instead of the old string_vector structure. Update code accordingly.
3029 (ada_make_symbol_completion_list): Use the new VEC type instead of
3030 the old string_vector structure, and update the code accordingly.
3031 * Makefile.in (ada-lang.o): Add dependency on vec.h.
3033 2008-02-06 Pierre Muller <muller@ics.u-strasbg.fr>
3035 * p-exp.y: Set current_type in missing places.
3036 (leftdiv_is_integer): New static variable.
3037 Typecast right operand of BINOP_DIV to long_double if both operands
3040 2008-02-06 Maciej W. Rozycki <macro@mips.com>
3042 * remote-mips.c (set_breakpoint): Rename to...
3043 (mips_set_breakpoint): ... this.
3044 (clear_breakpoint): Rename to...
3045 (mips_clear_breakpoint): ... this.
3046 (common_breakpoint): Rename to...
3047 (mips_common_breakpoint): ... this.
3048 (check_lsi_error): Rename to...
3049 (mips_check_lsi_error): ... this.
3051 2007-02-05 Joel Brobecker <brobecker@adacore.com>
3053 * language.h (struct language_defn): Add new field
3054 la_make_symbol_completion_list.
3055 * symtab.c (default_make_symbol_completion_list): Renames
3056 make_symbol_completion_list.
3057 (make_symbol_completion_list): New function.
3058 * symtab.h (default_make_symbol_completion_list): Add declaration.
3059 * langauge.c (unknown_language): Set la_make_symbol_completion_list.
3060 (auto_language, local_language): Likewise.
3061 * objc-lang.c (objc_language_defn): Likewise.
3062 * scm-lang.c (scm_language_defn): Likewise.
3063 * m2-lang.c (m2_language_defn): Likewise.
3064 * f-lang.c (f_language_defn): Likewise.
3065 * jv-lang.c (java_language_defn): Likewise.
3066 * p-lang.c (pascal_language_defn): Likewise.
3067 * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn)
3068 (minimal_language_defn): Likewise.
3069 * ada-lang.c (struct string_vector): New structure.
3070 (new_string_vector, string_vector_append, ada_unqualified_name)
3071 (add_angle_brackets, symbol_completion_match, symbol_completion_add)
3072 (ada_make_symbol_completion_list): New functions.
3073 (ada_language_defn): Set la_make_symbol_completion_list.
3074 * ada-lang.h (ada_make_symbol_completion_list): Remove declaration,
3075 this function is static.
3077 2008-02-05 Kevin Buettner <kevinb@redhat.com>
3079 * mn10300-tdep.c (mn10300_push_dummy_call): Adjust stack pointer
3080 to account for call site optimizations.
3082 2008-02-05 Andrzej Zaborowski <balrogg@gmail.com>
3084 * tracepoint.c (read_actions): Handle end-of-text indicator
3085 in action list properly. (Committed by Jim Blandy)
3087 2008-02-05 Jim Blandy <jimb@red-bean.com>
3089 * ax-gdb.c (gen_expr): Yield ordinary error if asked to trace a
3090 pseudoregister, not an internal error.
3091 Reported by: Andrzej Zaborowski
3093 2008-02-04 Vladimir Prus <vladimir@codesourcery.com>
3095 * varobj.c (c_value_of_variable): Use xstrdup.
3097 2008-02-04 Vladimir Prus <vladimir@codesourcery.com>
3099 Update stored rendition of varobj value when format changes.
3100 * varobj.c (varobj_set_display_format): Recomputed
3102 (c_value_of_variable): Return print_value.
3104 2008-02-03 Doug Evans <dje@google.com>
3106 * eval.c (evaluate_subexp_standard): Fix type of result of mixed
3107 integer/float division operations when EVAL_AVOID_SIDE_EFFECTS.
3108 * valops.c (value_one): New function.
3109 * value.h (value_one): Declare.
3111 Fix argument promotion for binary arithmetic ops for C.
3112 * valarith.c (unop_result_type): New fn.
3113 (binop_result_type): New fn.
3114 (value_binop): Move result type computation to binop_result_type.
3115 (value_pos, value_neg, value_complement): Move result type
3116 computation to unop_result_type.
3119 * gdbtypes.c (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
3120 Return basetype, fieldno if found. All callers updated.
3121 Don't cache TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE if from different
3123 * gdbtypes.h (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
3124 * symfile.h (fill_in_vptr_fieldno): Delete.
3126 2008-02-02 Doug Evans <dje@google.com>
3128 * valarith.c (value_binop): Handle unsigned BINOP_REM division by zero.
3130 * typeprint.c (*): Whitespace cleanup.
3132 2008-02-02 Mark Kettenis <kettenis@gnu.org>
3133 Luis Machado <luisgpm@br.ibm.com>
3134 Thiago Jung Bauermann <bauerman@br.ibm.com>
3136 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that
3137 don't fit into registerson the stack the way GCC does.
3139 2008-02-01 Joel Brobecker <brobecker@adacore.com>
3141 * symtab.c (symbol_set_names): Do not add an entry in the demangling
3142 hash table for Ada symbols. Just store the linkage name as is,
3143 and leave the demangled_name as NULL.
3145 2007-02-01 Joel Brobecker <brobecker@adacore.com>
3147 * dwarf2read.c (add_partial_symbol): Always store all Ada subprograms
3148 in the global scope.
3149 (new_symbol): Likewise.
3151 2008-02-01 Vladimir Prus <vladimir@codesourcery.com>
3153 * breakpoint.c (break_command_1): Return void.
3154 (break_command_really): Return void. Rethrow
3155 exceptions instead of returning.
3156 (gdb_breakpoint): Remove the error_message parameter.
3157 Return void. Rename to set_breakpoint.
3158 * gdb.h (gdb_breakpoint): Rename and move to...
3159 * breakpoint.h (set_breakpoint): ...here.
3160 * mi/mi-cmb-break.c (mi_cmd_break_insert): Restore
3161 event hooks even if exception is thrown. Adjust to
3162 gdb_breakpoint interface changes.
3165 2008-02-01 Thiago Jung Bauermann <bauerman@br.ibm.com>
3167 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Write 32-bit
3168 float in both first and second word in the doubleword, to support
3171 2008-02-01 Vladimir Prus <vladimir@codesourcery.com>
3173 Properly rethrow exception. This fixes errors
3174 about non-existent functions for -break-insert.
3175 * breakpoint.c (break_command_really): Use throw_exception
3176 for rethrowing. If rethrowing, don't print the exception.
3178 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
3180 * NEWS: Mention Decimal Floating Point support.
3182 2008-01-31 Joel Brobecker <brobecker@adacore.com>
3184 * std-regs.c (value_of_builtin_frame_pc_reg): Change the returned
3185 value type to builtin_type_void_func_ptr.
3187 2008-01-31 Andreas Krebbel <krebbel1@de.ibm.com>
3189 * s390-tdep.c (is_float_singleton, is_float_like,
3190 alignment_of, s390_return_value): Make checks for
3191 TYPE_CODE_FLT to match TYPE_CODE_DECFLOAT as well.
3193 2008-01-31 Luis Machado <luisgpm@br.ibm.com>
3194 Thiago Jung Bauermann <bauerman@br.ibm.com>
3196 * infcmd.c (default_print_registers_info): Also print hex
3197 raw contents for TYPE_CODE_DECFLOAT registers.
3198 * ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member.
3199 * rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro.
3200 (rs6000_register_name): Add support for DFP pseudo-registers.
3201 (rs6000_pseudo_register_type): Likewise.
3202 rs6000_pseudo_register_reggroup_p): Likewise.
3203 (ppc_pseudo_register_read): New function.
3204 (ppc_pseudo_register_write): Likewise.
3205 (rs6000_pseudo_register_read): Likewise.
3206 (rs6000_pseudo_register_write): Likewise.
3207 (e500_pseudo_register_read): Move checks to
3208 rs6000_pseudo_register_read.
3209 (e500_pseudo_register_write): Move checks to
3210 rs6000_pseudo_register_write.
3211 (rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum. Install
3212 rs6000_pseudo_register_read and rs6000_pseudo_register_write
3213 in gdbarch if SPE or DFP is available. Adjust gdbarch's
3214 num_pseudo_regs to account for DFP pseudo regs.
3216 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
3218 * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_ev31_regnum member.
3219 * rs6000-tdep.c (IS_SPE_PSEUDOREG): New macro.
3220 (spe_register_p, rs6000_register_name, rs6000_pseudo_register_type,
3221 rs6000_pseudo_register_reggroup_p, e500_move_ev_register,
3222 e500_pseudo_register_read, e500_pseudo_register_write): Use
3223 IS_SPE_PSEUDOREG macro.
3224 (rs6000_frame_cache): Remove use of tdep->ppc_ev31_regnum.
3225 (rs6000_gdbarch_init): Remove unnecessary num_sprs local variable.
3226 Remove initialization of tdep->ppc_ev31_regnum.
3228 2008-01-08 Paul Hilfinger <hilfinger@adacore.com>
3230 * printcmd.c (print_formatted): Handle references as for unformatted
3233 2008-01-30 Joel Brobecker <brobecker@adacore.com>
3235 * eval.c (evaluate_subexp_standard): Add handling of user
3236 registers when in EVAL_AVOID_SIDE_EFFECTS mode.
3238 2008-01-30 Pierre Muller <muller@ics.u-strasbg.fr>
3240 * eval.c (evaluate_subexp_standard): Support
3241 BINOP_INTDIV opcode.
3243 2008-01-30 Paul N. Hilfinger <hilfinger@adacore.com>
3245 * valarith.c (value_binop): Add floating-point BINOP_MIN and
3247 For BINOP_EXP, use length and signedness of left operand only for
3248 result, as for shifts.
3249 For integral operands to BINOP_EXP, use new integer_pow and
3250 uinteger_pow functions so as to get full range of results.
3251 (integer_pow): New function.
3252 (uinteger_pow): New function.
3254 2008-01-30 Vladimir Prus <vladimir@codesourcery.com>
3256 Use vector for varobj_list_children interface.
3257 * gdb/varobj.c (varobj_list_children): Return vector
3259 * gdb/varobj.h (varobj_list_children): Adjust
3261 (varobj_p): Declare. Declare vector thereof.
3262 * mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust
3263 for varobj_list_children change.
3264 * Makefile.in (varobj_h): Update dependencies.
3266 2008-01-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
3268 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Add support for
3269 TYPE_CODE_DECFLOAT arguments.
3270 (ppc64_sysv_abi_push_dummy_call) Likewise.
3271 (get_decimal_float_return_value): New function.
3272 (do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return
3273 values by calling get_decimal_float_return_value.
3274 (ppc64_sysv_abi_return_value): Likewise.
3276 2008-01-30 Nick Roberts <nickrob@snap.net.nz>
3278 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Add field
3279 for preprocessor macro information. Formatting changes.
3281 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com>
3283 * remote.c (struct remote_state): Add cached_wait_status.
3284 (remote_exec_file): New variable.
3285 (PACKET_vAttach, PACKET_vRun): New constants.
3286 (extended_remote_restart): Do not query for status.
3287 (struct start_remote_args): New.
3288 (remote_start_remote): Take it as a second argument. Check
3289 whether the target is running. Issue an error for non-running
3290 non-extended targets. Cache the wait status. Set inferior_ptid
3292 (remote_open_1): Prompt to disconnect non-running targets. Make
3293 sure the target is marked running. Do not set inferior_ptid here.
3294 Update call to remote_start_remote. Do not call remote_check_symbols
3295 if the target is not running.
3296 (remote_detach_1): Rename from remote_detach. Take an EXTENDED
3297 argument. Handle a non-running target.
3298 (remote_detach): Use it.
3299 (extended_remote_detach): New.
3300 (remote_disconnect): Fix typo. Use remoute_mourn_1.
3301 (extended_remote_attach_1, extended_remote_attach)
3302 (extended_async_remote_attach): New.
3303 (remote_vcont_resume): Remove unused variable.
3304 (remote_wait, remote_async_wait): Use any cached wait status.
3305 (putpkt_binary, getpkt): Clear any cached wait status.
3306 (extended_remoute_mourn_1): New.
3307 (extended_remote_mourn): Use it.
3308 (extended_async_remote_mourn, extended_remote_run): New.
3309 (extended_remote_create_inferior_1): New.
3310 (extended_remote_create_inferior): Use it.
3311 (extended_remote_async_create_inferior): Likewise.
3312 (remote_xfer_partial): Skip for non-executing targets.
3313 (init_extended_remote_ops): Set to_detach and to_attach.
3314 (init_extended_async_remote_ops): Likewise. Use
3315 extended_async_remote_mourn.
3316 (_initialize_remote): Register vAttach, vRun, and
3317 set remote exec-file.
3318 * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
3320 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com>
3322 * Makefile.in (symfile.o): Update.
3323 * NEWS: Mention exec tracing support.
3324 * inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
3326 * infcmd.c (kill_if_already_running, detach_command)
3327 (disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
3328 * infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
3329 (follow_exec): Do not check may_follow_exec. Do not mourn and push
3330 targets. Apply the sysroot path to the loaded executable. Use
3331 no_shared_libraries.
3332 * linux-nat.c (linux_child_follow_fork): Print fork following
3333 messages if verbose.
3334 (kill_wait_callback): Kill again before waiting a second time.
3335 * symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
3336 no_shared_libraries.
3338 2008-01-29 Joel Brobecker <brobecker@adacore.com>
3340 * amd64-tdep.c (amd64_classify): Add handling of TYPE_CODE_CHAR.
3342 2008-01-29 Joel Brobecker <brobecker@adacore.com>
3344 * nto-tdep.h: Remove #include "defs.h".
3345 * nto-tdep.c: Add #include "defs.h".
3346 * Makefile.in (nto_tdep_h): Update dependencies.
3347 (nto-tdep.o): Likewise.
3349 2008-01-29 Joel Brobecker <brobecker@adacore.com>
3351 * infrun.c (wait_for_inferior): Add treat_exec_as_sigtrap parameter
3353 (proceed, start_remote): Update call to wait_for_inferior.
3354 * inferior.h (wait_for_inferior): Update declaration.
3355 * fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c,
3356 solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior.
3357 * inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as
3358 TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED.
3360 2008-01-29 Aleksandar Ristovski <aristovski@qnx.com>
3362 * varobj (adjust_value_for_child_access): Added checking for
3363 returned value from gdb_value_ind.
3364 (c_describe_child): Likewise.
3365 (cplus_describe_child): Fixed a typo.
3367 2008-01-29 Jim Blandy <jimb@red-bean.com>
3369 * MAINTAINERS: Update my info.
3371 2008-01-29 Vladimir Prus <vladimir@codesourcery.com>
3373 Use multiple locations for hardware watchpoints.
3374 This eliminates the need to traverse value chain, doing
3375 various checks, in three different places.
3377 * breakpoint.h (struct bp_location): New fields
3378 lengths and watchpoint_type.
3379 (struct breakpoint): Remove the val_chain field.
3380 * breakpoint.c (is_hardware_watchpoint): New.
3381 (free_valchain): Remove.
3382 (update_watchpoint): New.
3383 (insert_bp_location): For hardware watchpoint, just
3385 (insert_breakpoints): Call update_watchpoint_locations
3386 on all watchpoints. If we have failed to insert
3387 any location of a hardware watchpoint, remove all inserted
3389 (remove_breakpoint): For hardware watchpoints, directly
3391 (watchpoints_triggered): Iterate over locations.
3392 (bpstat_stop_status): Use only first location of
3393 a resource watchpoint.
3394 (delete_breakpoint): Don't call free_valchain.
3395 (print_one_breakpoint): Don't print all
3396 locations for watchpoints.
3397 (breakpoint_re_set_one): Use update_watchpoint for
3400 2008-01-29 Vladimir Prus <vladimir@codesourcery.com>
3402 Don't reset watchpoint block on solib load.
3404 * breakpoint.c (insert_bp_location): For watchpoints,
3405 recompute condition.
3406 (breakpoint_re_set_one): Instead of recomputing value
3407 and condition for watchpoints, just reset value and
3408 let insert_breakpoints/insert_bp_location recompute it.
3409 Don't do anything about disabled watchpoint.
3411 2008-01-29 Pierre Muller <muller@ics.u-strasbg.fr>
3413 * valarith.c (value_binop): Handle unsigned integer
3416 2008-01-28 Kevin Buettner <kevinb@redhat.com>
3418 * mn10300-tdep.c (mn10300_analyze_prologue): Check for an
3419 instruction pattern that appears frequently in position
3420 independent code. Fix bug in code which looks for "fmov" and
3421 backtracks if no "fmov" is found.
3423 2008-01-28 Doug Evans <dje@google.com>
3425 * dbxread.c (read_dbx_symtab): Fix indentation.
3426 Reformat comments to 80 columns.
3427 Move local var def closer to only use.
3429 2008-01-28 Daniel Jacobowitz <dan@codesourcery.com>
3431 * fork-child.c (SHELL_FILE): Remove #ifndef.
3432 (fork_inferior): Remove SHELL_COMMAND_CONCAT.
3434 2008-01-25 Pierre Muller <muller@ics.u-strasbg.fr>
3436 * i386-tdep.c (i386_skip_noop): New function.
3437 (i386_analyze_prologue): Call i386_skip_noop function.
3439 2008-01-24 Michael Snyder <msnyder@specifix.com>
3441 * procfs.c (procfs_xfer_partial): Comment, cut/paste error.
3442 * win32-nat.c (win32_xfer_partial): Ditto.
3443 * target.c (default_xfer_partial): Minor whitespace adjustment.
3445 2008-01-24 Pedro Alves <pedro@codesourcery.com>
3447 * arm-tdep.c (arm_addr_bits_remove): In non 26-bit mode, don't
3448 strip bit 1 even if pc doesn't point to thumb code.
3450 2008-01-23 Daniel Jacobowitz <dan@codesourcery.com>
3452 * remote.c (remote_wait): Handle SIGINT between packets.
3453 (remote_async_wait): Likewise.
3455 2008-01-23 Vladimir Prus <vladimir@codesourcery.com>
3456 Chris Demetriou <cgd@google.com>
3458 * thread.c (add_thread_silent): Renamed
3460 (print_thread_events): New variable definition.
3461 (show_print_thread_events): New function.
3462 (_initialize_thread): Add "set print thread-events" and
3463 "show print thread-events" commands.
3464 (add_thread): Announce new thread.
3465 * gdbthread.h (add_thread_silent): Declare.
3466 (print_thread_events): New variable declaration.
3467 * inf-ttrace.c (inf_ttrace_wait): Don't
3468 inform about new thread, as add_thread is always
3469 called too, and will take care of that.
3470 * infrun.c (handle_inferior_event): Likewise.
3471 * procfs.c (procfs_wait): Likewise.
3472 * remote.c (remote_currthread): Likewise.
3473 * sol-thread.c (sol_thread_wait): Likewise.
3474 * win32-nat.c (get_win32_debug_event): Likewise.
3475 * linux-thread-db.c (attach_thread): Likewise.
3476 Remove the verbose parameter.
3477 (check_event): Make detach_thread be verbose
3478 only if print_thread_events is set.
3479 * linux-nat.c (lin_lwp_attach_lwp): Don't inform
3480 about new thread. This is called only from
3481 linux-thread-db.c:attach_thread, which will take care.
3482 Remove the verbose parameter.
3483 * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
3485 2008-01-23 Nick Roberts <nickrob@snap.net.nz>
3487 * mi/mi-cmd-var.c (mi_cmd_var_set_format): Add value field to output.
3489 2008-01-22 Vladimir Prus <vladimir@codesourcery.com>
3491 * breakpoint.c (break_command_really): New parameter
3493 (break_command_1): Pass 0 as
3494 ignore_count to break_command_really.
3495 (gdb_breakpoint): Pass ignore_count to
3496 break_command_really.
3498 2008-01-21 Kevin Buettner <kevinb@redhat.com>
3500 * mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find
3501 sigcontext struct via pointer.
3502 (struct sigframe comment): Update to show new field `psc'.
3504 2008-01-21 Vladimir Prus <vladimir@codesourcery.com>
3506 * infrun.c (handle_inferior_event): If
3507 we failed to remove breakpoints, error,
3508 don't try to increment PC by hand.
3510 2008-01-18 Nick Hudson <nick.hudson@dsl.pipex.com>
3512 Add NetBSD/hppa target and host support.
3514 * hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
3515 (hppabsd_gregset): Move to ...
3516 (hppabsd_regset_from_core_section): Rename
3517 hppaobsd_regset_from_core_section and move to ...
3518 (hppabsd_find_global_pointer): Update comment.
3519 (hppabsd_init_abi): Make global. Do not register
3520 hppabsd_regset_from_core_section.
3521 (hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
3523 (_initialize_hppabsd_tdep): Move to ...
3524 * hppaobsd-tdep.c: ... here. New file.
3525 * hppnbsd-tdep.c: New file.
3526 * hppnbsd-nat.c: New file.
3527 * Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
3528 (ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
3529 (hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
3530 (hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
3531 * configure.host (hppa*-*-netbsd*): New entry.
3532 * configure.tgt (hppa*-*-netbsd*): New entry.
3533 (hppa*-*-openbsd*): Update.
3534 * NEWS (New native configuration): Mention NetBSD/hppa.
3535 (New targets): Mention NetBSD/hppa.
3537 2008-01-18 Markus Deuling <deuling@de.ibm.com>
3539 * gdbarch.sh (function_list): Add new property bits_big_endian to
3541 * gdbarch.{c,h}: Regenerate.
3543 * value.c (struct value): Replace BITS_BIG_ENDIAN by
3544 gdbarch_bits_big_endian (comment).
3545 (unpack_field_as_long, modify_field): Likewise.
3546 * value.h: Likewise (comment).
3547 * valops.c (value_slice): Likewise.
3548 * valarith.c (value_subscript, value_bit_index): Likewise.
3549 * gdbtypes.h (field): Likewise (comment).
3550 * eval.c (evaluate_subexp_standard): Likewise.
3551 * dwarf2read.c (dwarf2_add_field): Likewise.
3552 * ada-lang.c (decode_packed_array, ada_value_primitive_packed_val)
3553 (move_bits, ada_value_assign, value_assign_to_component): Likewise.
3555 * defs.h (BITS_BIG_ENDIAN): Remove.
3557 2008-01-18 Markus Deuling <deuling@de.ibm.com>
3559 * jv-exp.y (yylex): Replace DEPRECATED_STREQN with the appropriate
3561 * m2-exp.y (yylex): Likewise.
3562 * objc-exp.y (yylex): Likewise.
3564 * defs.h (DEPRECATED_STREQN): Remove.
3566 2008-01-17 H.J. Lu <hjl.tools@gmail.com>
3568 * MAINTAINERS: Update my email address.
3570 2008-01-17 Jim Blandy <jimb@codesourcery.com>
3572 * README: Mention gdbserver/README.
3574 2008-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
3576 * valarith.c (value_binop): Handle BINOP_INTDIV
3577 for unsigned and signed integers.
3579 2008-01-17 Ulrich Weigand <uweigand@de.ibm.com>
3581 * s390-tdep.c (s390_gdbarch_init): Set default long double
3582 type to 128-bit IEEE quad.
3584 2008-01-17 Joel Brobecker <brobecker@adacore.com>
3586 * hpux-thread.c (hpux_thread_resume): Delete commented-out code.
3588 2008-01-16 Mark Kettenis <kettenis@gnu.org>
3590 * auxv.c (fprint_target_auxv): Add support for AT_SUN_AUXFLAGS.
3592 * dfp.c, dfp.h: Rename decimal_to_double to decimal_to_doublest.
3593 * value.c: All callers changed.
3595 2008-01-16 Markus Deuling <deuling@de.ibm.com>
3597 * rs6000-nat.c (add_vmap, vmap_ldinfo, vmap_exec): Replace
3598 DEPRECATED_STREQ by its expression.
3599 * coffread.c (coff_locate_sections, coff_symtab_read): Likewise.
3600 * xcoffread.c (read_xcoff_symtab, read_symbol_lineno, find_linenos)
3601 (scan_xcoff_symtab): Likewise.
3602 * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Likewise.
3603 * f-lang.c (find_common_for_function): Likewise.
3604 * objc-exp.y (parse_number): Likewise.
3606 * defs.h (DEPRECATED_STREQ): Remove.
3608 2008-01-16 Markus Deuling <deuling@de.ibm.com>
3610 * mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter.
3611 * mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use
3612 get_frame_arch to get at the current_architecture. Update AM33_MODE
3614 (mn10300_analyze_prologue): Add gdbarch as parameter. Update caller.
3615 (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
3617 (set_reg_offsets, mn10300_analyze_prologue): Fix indentation.
3619 2008-01-16 Markus Deuling <deuling@de.ibm.com>
3621 * amd64-nat.h (amd64_native_gregset_supplies_p): Add gdbarch as
3623 * amd64-nat.c (amd64_native_gregset_supplies_p): Likewise.
3625 (amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace
3626 current_gdbarch by gdbarch. Update caller.
3628 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers)
3629 (amd64_linux_store_inferior_registers): Use get_regcache_arch to get at
3630 the current architecture. Update calls of
3631 amd64_native_gregset_supplies_p.
3632 * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers)
3633 (amd64bsd_store_inferior_registers): Likewise.
3635 2008-01-16 Markus Deuling <deuling@de.ibm.com>
3637 * ppc-linux-nat.c (ppc_register_u_addr): Add gdbarch as parameter.
3638 Replace current_gdbarch by gdbarch. Update caller.
3640 2008-01-16 Markus Deuling <deuling@de.ibm.com>
3642 * dbxread.c (repeated_header_complaint, dbx_symfile_init)
3643 (read_dbx_dynamic_symtab, function_outside_compilation_unit_complaint)
3644 (read_dbx_symtab, end_psymtab, dbx_psymtab_to_symtab_1)
3645 (dbx_psymtab_to_symtab, read_ofile_symtab, process_one_symbol)
3646 (stabsect_build_psymtabs): Fix indentation.
3648 2008-01-15 Michael Snyder <msnyder@specifix.com>
3650 * corelow.c (core_xfer_partial): Comment, cut/paste error.
3652 2008-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
3654 * win32-nat.c (win32_create_inferior): Restore code calling
3655 CloseHandle on ProcessInformation structure.
3657 2008-01-13 Nick Hudson <nick.hudson@dsl.pipex.com>
3659 * configure.ac: Check for void * as 3 argument of ptrace.
3660 * configure: regenerate.
3662 2008-01-11 Markus Deuling <deuling@de.ibm.com>
3664 * alpha-tdep.c (alpha_heuristic_proc_start)
3665 (alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
3666 current_gdbarch by gdbarch.
3668 (alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
3669 current architecture by frame_info. Update alpha_heuristic_proc_start
3672 (alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
3673 get_frame_arch to get at the current architecture by frame_info. Update
3674 alpha_sigtramp_register_address call.
3676 * arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
3677 current_gdbarch by gdbarch. Update caller.
3678 (convert_to_extended, convert_from_extended): Add endianess parameter
3679 for comparison. Update caller.
3680 (arm_extract_return_value, arm_store_return_value): Use
3681 get_regcache_arch to get at the current architecture.
3683 * cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
3684 current_gdbarch by gdbarch. Update caller.
3685 (cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
3686 gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.
3688 * h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
3689 gdbarch as parameter. Update caller.
3690 (h8300_init_frame_cache): Add gdbarch as parameter. Replace
3691 current_gdbarch by gdbarch. Update caller.
3693 * hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and
3694 update caller. Replace current_gdbarch by gdbarch.
3696 * m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
3697 the current architecture. Replace current_gdbarch by gdbarch.
3698 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
3699 (STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
3700 expression. Add gdbarch as parameter and replace current_gdbarch with
3702 (M6811_TDEP): Remove.
3703 (m68hc11_frame_prev_register): Use get_frame_arch to get at the current
3705 (m68hc11_scan_prologue): Add gdbarch as parameter. Replace
3706 current_gdbarch by gdbarch. Update caller.
3708 * m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
3710 (m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
3713 * rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
3714 caller. Relace current_gdbarch by gdbarch.
3715 (altivec_register_p, spe_register_p): Likewise.
3716 * ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
3718 * ppc-linux-nat.c (fetch_register, store_register): Update caller of
3719 altivec_register_p and spe_register_p.
3721 * score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update
3722 caller. Replace current_gdbarch by gdbarch.
3723 (score_analyze_prologue): use get_frame_arch to get at the current
3726 * sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
3727 * sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
3728 current_gdbarch by gdbarch. Update caller.
3729 (sparc_frame_cache): Use get_frame_arch to get at the current
3731 * sparce64-tdep.c (sparc64_skip_prologue): Update call of
3732 sparc_analyze_prologue.
3734 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
3737 2008-01-11 Markus Deuling <deuling@de.ibm.com>
3739 * exec.c: #include "arch-utils.h"
3740 (print_section_info): Use gdbarch_from_bfd to get at the
3741 current architecture. Replace current_gdbarch. Fix indention. Replace
3742 deprecated_print_address_numeric by paddress.
3743 * Makefile.in (exec.o) Add dependency to arch-utils.h.
3745 * valprint.c (val_print_string): Replace
3746 deprecated_print_address_numeric.
3747 * tracepoint.c (trace_mention, scope_info): Likewise.
3748 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
3749 (print_symbol, print_partial_symbols, maintenance_info_psymtabs)
3750 (maintenance_check_symtabs): Likewise.
3751 * symfile.c (list_overlays_command): Likewise.
3752 * stack.c (frame_info, print_block_frame_labels): Likewise.
3753 * printcmd.c (print_address, print_address_demangle)
3754 (address_info): Likewise.
3755 * corefile.c (memory_error): Likewise.
3756 * infcmd.c (jump_command): Likewise.
3757 * breakpoint.c (insert_bp_location, describe_other_breakpoints)
3758 (mention, delete_breakpoint): Likewise.
3759 * c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
3760 * dwarf2read.c (dump_die): Likewise.
3761 * ada-valprint.c (ada_val_print_1): Likewise.
3762 * f-valprint.c (f_val_print): Likewise.
3763 * linux-fork.c (info_forks_command): Likewise.
3764 * m32r-com.c (m32r_load_section, m32r_load)
3765 (m32r_upload_command): Likewise.
3767 * ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.
3769 2008-01-11 Markus Deuling <deuling@de.ibm.com>
3771 * gdbarch.sh (skip_prologue): Add gdbarch
3773 * gdbarch.{c,h}: Regenerate.
3775 * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter.
3776 * amd64-tdep.c (amd64_skip_prologue): Likewise.
3777 * avr-tdep.c (avr_skip_prologue): Likewise.
3778 * cris-tdep.c (cris_skip_prologue): Likewise.
3779 * frv-tdep.c (frv_skip_prologue): Likewise.
3780 * h8300-tdep.c (h8300_skip_prologue): Likewise.
3781 * hppa-tdep.c (hppa_skip_prologue): Likewise.
3782 * i386-tdep.c (i386_skip_prologue): Likewise.
3783 * ia64-tdep.c (ia64_skip_prologue): Likewise.
3784 * iq2000-tdep.c (iq2000_skip_prologue): Likewise.
3785 * m32r-tdep.c (m32r_skip_prologue): Likewise.
3786 * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise.
3787 * m68k-tdep.c (m68k_skip_prologue): Likewise.
3788 * m88k-tdep.c (m88k_skip_prologue): Likewise.
3789 * mep-tdep.c (mep_skip_prologue): Likewise.
3790 * mips-tdep.c (mips_skip_prologue): Likewise.
3791 * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
3792 * mt-tdep.c (mt_skip_prologue): Likewise.
3793 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
3794 * score-tdep.c (score_skip_prologue): Likewise.
3795 * sh64-tdep.c (sh64_skip_prologue): Likewise.
3796 * sh-tdep.c (sh_skip_prologue): Likewise.
3797 * sparc64-tdep.c (sparc64_skip_prologue): Likewise.
3798 * sparc-tdep.c (sparc32_skip_prologue): Likewise.
3799 * spu-tdep.c (spu_skip_prologue): Likewise.
3800 * v850-tdep.c (v850_skip_prologue): Likewise.
3801 * vax-tdep.c (vax_skip_prologue): Likewise.
3802 * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
3803 * xtensa-tdep.c (xtensa_skip_prologue): Likewise.
3805 * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace
3806 current_gdbarch by gdbarch.
3807 * m32c-tdep.c (m32c_skip_prologue): Likewise.
3808 * s390-tdep.c (s390_skip_prologue): Likewise.
3810 2008-01-10 Doug Evans <dje@google.com>
3812 * defs.h (struct continuation_arg): Fix typo in comment.
3813 * target.c (target_translate_tls_address): Fix comment spelling error.
3815 2008-01-09 Thiago Jung Bauermann <bauerman@br.ibm.com>
3817 * doublest.h (DOUBLEST_PRINT_FORMAT): Remove % from string.
3818 (DOUBLEST_SCAN_FORMAT): Likewise.
3819 * dfp.c (decimal_from_floating): Use DOUBLEST_PRINT_FORMAT.
3820 * ada-lex.l (processReal): Prepend "%" to use of DOUBLEST_SCAN_FORMAT.
3821 * c-exp.y (parse_number): Likewise.
3822 * jv-exp.y (parse_number): Likewise.
3823 * objc-exp.y (parse_number): Likewise.
3824 * p-exp.y (parse_number): Likewise.
3826 2008-01-09 Joel Brobecker <brobecker@adacore.com>
3828 * gdbtypes.c (create_array_type): Add handling of null Ada arrays.
3829 (check_typedef): Likewise.
3831 2008-01-09 Luis Machado <luisgpm@br.ibm.com>
3833 * printcmd.c (printf_command): Add seen_big_h, seen_big_d and
3834 seen_double_big_d, treat the new H, D, and DD modifiers as length
3837 2008-01-08 Joel Brobecker <brobecker@adacore.com>
3839 * dwarf2read.c (read_enumeration_type): Add comment.
3841 2008-01-08 Thiago Jung Bauermann <bauerman@br.ibm.com>
3843 * config.in: Regenerate.
3845 2008-01-08 Joel Brobecker <brobecker@adacore.com>
3847 * ada-lang.c (ada_convert_actual): Renames convert_actual.
3849 (ada_convert_actuals): Delete.
3850 * ada-lang.h (ada_convert_actual): Add declaration.
3851 (ada_convert_actuals): Remove declaration.
3852 * infcall.c: #include "ada-lang.h".
3853 (value_arg_coerce): Add new parameter sp. Update function
3854 documetnation. Add handling of Ada function call parameters.
3855 * Makefile.in (infcall.o): Update dependencies.
3857 2008-01-08 Paul Hilfinger <hilfinger@adacore.com>
3859 * ada-lang.c (ensure_lval): Fix value lval kind.
3860 (convert_actual): Add handling for arguments passed by reference.
3862 2008-01-08 Doug Evans <dje@google.com>
3864 * dbxread.c (read_dbx_symtab): Fix indentation.
3866 2008-01-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
3868 * Makefile.in (dfp.o): Depend on expression.h, gdbtypes.h and value.h.
3869 (valarith.o): Depend on dfp.h.
3870 (valops.o): Likewise.
3871 * dfp.c: Include expression.h, gdbtypes.h, value.h and dfp.h.
3872 (set_decnumber_context): New function.
3873 (decimal_check_errors): Likewise.
3874 (decimal_from_number): Likewise.
3875 (decimal_to_number): Likewise.
3876 (decimal_from_string): Use set_decnumber_context and
3877 decimal_check_errors.
3878 (decimal_from_integral): New function.
3879 (decimal_from_floating): Likewise.
3880 (decimal_to_double): Likewise.
3881 (promote_decimal): Likewise.
3882 (decimal_binop): Likewise.
3883 (decimal_is_zero): Likewise.
3884 (decimal_compare): Likewise.
3885 (decimal_convert): Likewise.
3886 * dfp.h (decimal_from_integral): New prototype.
3887 (decimal_from_floating): Likewise.
3888 (decimal_to_double): Likewise.
3889 (decimal_binop): Likewise.
3890 (decimal_is_zero): Likewise.
3891 (decimal_compare): Likewise.
3892 (decimal_convert): Likewise.
3893 * eval.c (evaluate_subexp_standard): Remove expect_type argument from
3894 call to value_from_decfloat.
3895 * valarith.c: Include dfp.h.
3896 (value_args_as_decimal): New function.
3897 (value_binop): Add if block to handle TYPE_CODE_DECFLOAT values.
3898 (value_logical_not): Likewise.
3899 (value_equal): Likewise.
3900 (value_less): Likewise.
3901 (value_pos): Likewise.
3902 (value_neg): Formatting fix.
3903 * valops.c: Include dfp.h.
3904 (value_cast): Add if block to handle TYPE_CODE_DECFLOAT values.
3905 * value.c (unpack_long): Add case to handle TYPE_CODE_DECFLOAT.
3906 (unpack_double): Add if block to handle TYPE_CODE_DECFLOAT.
3907 (value_from_decfloat): Remove expect_type argument.
3908 * value.h (value_from_decfloat): Update prototype.
3910 2008-01-07 Vladimir Prus <vladimir@codesourcery.com>
3912 Ignore change in name of dynamic linker during
3913 execution on Solaris. This also unbreaks pending breakpoints.
3915 * solist.h (struct target_so_ops): New field same.
3916 * solib-svr4.c (svr4_same): New.
3917 (_initialize_svr4_solib): Register svr4_same.
3918 * solib.c (update_solib_list): Use ops->same, if available.
3920 2008-01-06 Christopher Faylor <me+cygwin@cgf.cx>
3922 * win32-nat.c (win32_make_so): Use cygwin-style path to avoid warnings
3923 when using MS-DOS paths.
3925 2008-01-05 Pedro Alves <pedro@codesourcery.com>
3927 * NEWS: Mention --pid and --core command line behaviour changes.
3929 2008-01-05 Pedro Alves <pedro@codesourcery.com>
3931 * main.c (captured_main): Remove 'count' varible and the
3932 ALIGN_STACK_ON_ENTRY block that used it. Error out if --core and
3933 --pid options were issued simultaneously. If an explicit pid
3934 option was passed, don't fallback to core file. Detect extra
3935 arguments better in the presence of explicit pid or core
3938 2008-01-05 Joel Brobecker <brobecker@adacore.com>
3940 * ada-lang.c (ada_which_variant_applies): Correctly compute
3941 the value of the discriminant when the variant record is packed.
3943 2008-01-04 Joel Brobecker <brobecker@adacore.com>
3945 * ada-lang.c (is_name_suffix): Handle middle-name numeric suffixes
3946 that are used to differentiate homonyms.
3948 2008-01-04 Jerome Guitton <guitton@adacore.com>
3950 * ada-lang.c (decode_packed_array_type): Avoid a seg fault
3951 when the type is an anonymous pointer type.
3952 (ada_check_typedef): Avoid a seg fault when the type is null.
3953 * ada-typeprint.c (print_array_type): Add support for pointer
3956 2008-01-04 Paul N. Hilfinger <hilfinger@adacore.com>
3958 * ada-exp.y: Allow '{type} ADDRESS' notation on left of assignment.
3960 2008-01-04 Joel Brobecker <brobecker@adacore.com>
3962 * ada-lang.c (ada_evaluate_subexp): Evaluate tagged types in
3963 EVAL_NORMAL mode when noside is EVAL_AVOID_SIDE_EFFECTS.
3965 2008-01-04 Joel Brobecker <brobecker@adacore.com>
3967 * ada-exp.y (chop_separator): New function.
3968 (write_selectors): Rewrite to re-use chop_separator.
3969 (ada_nget_field_index, get_symbol_field_type): New functions.
3970 (write_var_or_type): Add support for "ptype TYPENAME.FIELD"
3973 2008-01-03 Thiago Jung Bauermann <bauerman@br.ibm.com>
3975 * symtab.c (find_pc_sect_line): Use SYMBOL_VALUE_ADDRESS instead
3976 of SYMBOL_VALUE when working with function symbols.
3978 2008-01-03 Joel Brobecker <brobecker@adacore.com>
3980 * ada-lang.c (resolve_subexp): Add handling of OP_REGISTER
3981 expressions. These expressions do not need to be rewriten.
3983 2008-01-03 Joel Brobecker <brobecker@adacore.com>
3985 * dwarf2read.c (read_enumeration_type): Flag type as stub if
3986 the given die is a declaration.
3988 2008-01-03 Joel Brobecker <brobecker@adacore.com>
3990 * ada-lang.c (ada_array_bound_from_type): Make non-static.
3991 Handle properly the case when the index type is an enumerated type.
3992 Do not return the subtype of the bounds type, just return the
3993 bounds type directly - this is not needed and is more consistent
3994 with what we do for arrays when no XA parallel type exists.
3996 2008-01-03 Joel Brobecker <brobecker@adacore.com>
3998 * ada-lang.c (static_unwrap_type): Add forward declaration.
3999 (template_to_static_fixed_type): Fields of dynamic types sometimes
4000 also need to be unwrapped. Take this into account.
4001 (ada_to_fixed_type_1): Renamed from ada_to_fixed_type.
4002 (ada_to_fixed_type): New wrapper around ada_to_fixed_type_1.
4003 * ada-typeprint.c (ada_print_type): Get the typename from
4004 the original type, not the base type.
4006 2008-01-03 Jerome Guitton <guitton@adacore.com>
4008 * ada-lang.c (ada_value_struct_elt, to_fixed_array_type)
4009 (to_fixed_array_type, ada_to_fixed_value_create, unwrap_value):
4010 Update calls to ada_to_fixed_type.
4011 (ada_template_to_fixed_record_type_1): Ditto, but without looking
4013 (ada_to_fixed_type): Add check_tag parameter; do not look for
4014 tag if null. When looking for a tag, use a fixed record type.
4015 * ada-lang.h (ada_to_fixed_type): Add check_tag parameter.
4016 * ada-valprint.c (printable_val_type, ada_value_print): Update
4017 calls to ada_to_fixed_type.
4019 2008-01-03 Luis Machado <luisgpm@br.ibm.com>
4021 * doublest.c (convert_floatformat_to_doublest): Call
4022 floatformat_to_doublest instead of floatformat_to_double and use
4024 (convert_doublest_to_floatformat): Call floatformat_from_doublest
4025 instead of floatformat_from_double and use DOUBLEST variables.
4027 2008-01-03 Nick Hudson <nick.hudson@dsl.pipex.com>
4029 * MAINTAINERS (Write After Approval): Add self.
4031 2008-01-03 Joel Brobecker <brobecker@adacore.com>
4033 * symfile.c (set_initial_language): Make non-static.
4034 * symfile.h (set_initial_language): Add declaration.
4035 * language.c: #include "symfile.h".
4036 (set_language): Call set_initial_language if the frame language
4037 could not be determined.
4039 2008-01-03 Paul N. Hilfinger <hilfinger@adacore.com>
4041 * eval.c (evaluate_subexp_for_address): Provide frame address to
4042 locate_var_value only if it will be needed.
4044 2008-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
4046 * linux-nat.c (linux_child_follow_fork): Call also CHECK_FOR_THREAD_DB.
4048 2008-01-02 Joel Brobecker <brobecker@adacore.com>
4050 * ada-lang.c (ada_evaluate_subexp): Modify the value returned
4051 when noside is EVAL_AVOID_SIDE_EFFECTS to be an lval_memory.
4052 This is needed to make sure that any other treatment applied
4053 to the resulting value does not fail for spurious reason,
4054 such as trying to take the address of this value.
4056 2008-01-02 Joel Brobecker <brobecker@adacore.com>
4058 * ada-lang.c (ada_value_equal): Dereference reference types when
4061 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
4063 Updated copyright notices for most files.
4065 2008-01-01 Christopher Faylor <me+gdb@cgf.cx>
4067 * win32-nat.c (psapi_module_handle): Remove static.
4068 (get_module_name): Rename from psapi_get_dll_name. Revamp slightly to
4069 return first module found if base_address is zero. Don't initialize
4070 psapi function pointers here. Convert to cygwin paths when
4072 (win32_pid_to_exec_file): Use Cygwin's /proc interface to determine
4073 executable name. Use get_module_name when that fails or when
4075 (_initialize_psapi): New function. Initialize psapi stuff before it is
4076 needed or issue a warning if it is not found. Move psapi_module_handle
4079 2008-01-01 Joel Brobecker <brobecker@adacore.com>
4081 * ada-lang.c (ada_remove_trailing_digits): New function.
4082 (ada_remove_po_subprogram_suffix): New function.
4083 (ada_decode): Improve. Move the description of the algorithm
4084 directly inside the code, instead of in the function global
4087 2008-01-01 Joel Brobecker <brobecker@adacore.com>
4089 * ada-valprint.c (ada_val_print_1) [TYPE_CODE_REF]: Ignore deref_ref
4090 and always print the dereferenced value.
4092 2008-01-01 Joel Brobecker <brobecker@adacore.com>
4094 * ada-lang.c (ada_evaluate_subexp, case BINOP_SUB): Add handling
4095 of the case where the first argument is a reference.
4096 (ada_evaluate_subexp, case BINOP_ADD): Likewise.
4098 2008-01-01 Joel Brobecker <brobecker@adacore.com>
4100 Implement support for Ada interface types.
4102 * ada-lang.c (ada_is_dispatch_table_ptr_type): New function.
4103 (ada_is_ignored_field): Ignore fields that are a dispatch table
4106 2008-01-01 Joel Brobecker <brobecker@adacore.com>
4108 * top.c (print_gdb_version): Update copyright year.
4110 2008-01-01 Joel Brobecker <brobecker@adacore.com>
4112 * ChangeLog-2007: New ChangeLog rotation.
4113 * ChangeLog: Reset for 2008.
4114 * config/djgpp/fnchange.lst: Add entries for ChangeLog-2006 and
4117 For older changes see ChangeLog-2007.
4123 version-control: never