gdb/Makefile.dist

   1 ##Copyright (C) 1989-1991 Free Software Foundation, Inc.
   2
   3 # This file is part of GDB.
   4
   5 # This program is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18
  19 # Destination directory of the software tree build
  20 destdir = /usr/local
  21
  22 # Place to install binaries in the destination tree.
  23 bindir=$(destdir)/bin
  24
  25 # System V: If you compile gdb with a compiler which uses the coff
  26 # encapsulation feature (this is a function of the compiler used, NOT
  27 # of the m-?.h file selected by config.gdb), you must make sure that
  28 # the GNU nm is the one that is used by munch.
  29
  30 # If you are compiling with GCC, make sure that either 1) You use the
  31 # -traditional flag, or 2) You have the fixed include files where GCC
  32 # can reach them.  Otherwise the ioctl calls in inflow.c
  33 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  34 # distribution will fix your include files up.
  35 #CC=cc
  36 #CC=gcc -traditional
  37 GCC=gcc
  38
  39 VPATH=$(srcdir)
  40
  41 # It is also possible that you will need to add -I/usr/include/sys to the
  42 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
  43 # is where it should be according to Posix).
  44
  45 YACC=bison -y
  46 # YACC=yacc
  47 SHELL=/bin/sh
  48 MAKE=make
  49
  50 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
  51 # Berkeley/Sun don't have quite enough.
  52 #M4=/usr/5bin/m4
  53 M4=gm4
  54 # where to find texinfo; if you have PostScript fonts you may want to try
  55 # the Cygnus mods (which also have different header/footer layout)
  56 #TEXIDIR=${srcdir}/../texinfo/cygnus
  57 TEXIDIR=${srcdir}/../texinfo/fsf
  58
  59 # Set this up with gcc if you have gnu ld and the loader will print out
  60 # line numbers for undefinded refs.
  61 #CC-LD=gcc -static
  62 CC-LD=${CC}
  63
  64 # define this to be "gmalloc.o" if you want to use the gnu malloc routine
  65 # (useful for debugging memory allocation problems in gdb).  To use your
  66 # system malloc, uncomment the following two lines.
  67 #GNU_MALLOC =
  68 #MALLOC_CFLAGS = -DNO_MALLOC_CHECK
  69 GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
  70 MALLOC_CFLAGS =
  71
  72 # Where is the "include" directory?  Traditionally ../include or ./include
  73 INCLUDE_DIR =  ${srcdir}/../include
  74 INCLUDE_DEP = $$(INCLUDE_DIR)
  75
  76 # Where is the source dir for the BFD library?  Traditionally ../bfd or ./bfd
  77 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
  78 BFD_DIR =  ${srcdir}/../bfd
  79 BFD_DEP = $$(BFD_DIR)
  80 BFD_LIB = $(BFD_DIR)${subdir}/libbfd.a
  81
  82 # Where is the source dir for the READLINE library?  Traditionally in .. or .
  83 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
  84 READLINE_DIR = ${srcdir}/../readline
  85 READLINE_DEP = $$(READLINE_DIR)
  86 RL_LIB = $(READLINE_DIR)${subdir}/libreadline.a
  87
  88 # All the includes used for CFLAGS and for lint.
  89 # -I. for config files.
  90 # -I${srcdir} possibly for regex.h also.
  91 INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I$(READLINE_DIR) -I${srcdir}/vx-share
  92
  93 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
  94 # CFLAGS for GDB
  95 GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
  96 #PROFILE_CFLAGS = -pg
  97
  98 CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
  99 # None of the things in CFLAGS will do any harm, and on some systems
 100 #  (e.g. SunOS4) it is important to use the M_CFLAGS.
 101 LDFLAGS = $(CFLAGS)
 102
 103 # Where is the "-liberty" library, containing getopt and obstack?
 104 LIBIBERTY_DIR = ${srcdir}/../libiberty
 105 LIBIBERTY = ${LIBIBERTY_DIR}${subdir}/libiberty.a
 106
 107 # Flags that describe where you can find the termcap library.
 108 # You may need to make other arrangements for USG.
 109 TERMCAP = -ltermcap
 110
 111 # The xconfig file must define REGEX and REGEX1 on USG machines.
 112 # If your sysyem is missing alloca(), or, more likely, it's there but
 113 # it doesn't work, define ALLOCA & ALLOCA1 too.
 114 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
 115
 116 # Libraries and corresponding dependencies for compiling gdb.
 117 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 118 # TERMCAP comes last, since readline depends on it.
 119 CLIBS = $(XM_CLIBS) ${TM_CLIBS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} ${TERMCAP}
 120 CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
 121
 122 ADD_FILES = ${REGEX} ${ALLOCA}  ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
 123 ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
 124
 125 VERSION = 3.96
 126 DIST=gdb-$(VERSION)
 127
 128 LINT=/usr/5bin/lint
 129 LINTFLAGS=
 130
 131 # Source files in the main directory.
 132 # Files which are included via a tconfig/* or xconfig/* file
 133 # should *not* be specified here; they're in "ALLDEPFILES".
 134 SFILES_MAINDIR = \
 135          blockframe.c breakpoint.c command.c core.c \
 136          environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
 137          main.c printcmd.c \
 138          remote.c source.c stack.c symmisc.c symtab.c symfile.c \
 139          utils.c valarith.c valops.c valprint.c values.c expread.y \
 140          signame.c cplus-dem.c mem-break.c target.c inftarg.c \
 141          dbxread.c coffread.c \
 142          ieee-float.c
 143
 144 # Source files in subdirectories (which will be handled separately by
 145 #  'make gdb.tar.Z').
 146 # Files which are included via a tconfig/* or xconfig/* file
 147 # should *not* be specified here; they're in "ALLDEPFILES".
 148 SFILES_SUBDIR = \
 149          ${srcdir}/vx-share/dbgRpcLib.h \
 150          ${srcdir}/vx-share/ptrace.h \
 151          ${srcdir}/vx-share/reg.h \
 152          ${srcdir}/vx-share/vxTypes.h \
 153          ${srcdir}/vx-share/vxWorks.h \
 154          ${srcdir}/vx-share/wait.h \
 155          ${srcdir}/vx-share/xdr_ld.h \
 156          ${srcdir}/vx-share/xdr_ptrace.h \
 157          ${srcdir}/vx-share/xdr_rdb.h \
 158          ${srcdir}/vx-share/xdr_regs.h \
 159          ${srcdir}/nindy-share/Makefile \
 160          ${srcdir}/nindy-share/VERSION \
 161          ${srcdir}/nindy-share/b.out.h \
 162          ${srcdir}/nindy-share/block_io.h \
 163          ${srcdir}/nindy-share/coff.h \
 164          ${srcdir}/nindy-share/demux.h \
 165          ${srcdir}/nindy-share/env.h \
 166          ${srcdir}/nindy-share/stop.h \
 167          ${srcdir}/nindy-share/ttycntl.h
 168
 169 # All source files that go into linking GDB, except config-specified files.
 170 SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
 171
 172 # All source files that lint should look at
 173 LINTFILES = $(SFILES) expread.tab.c init.c
 174
 175 # Documentation source files
 176 SFILES_DOCDIR = \
 177         ${srcdir}/doc/gdb.texinfo    \
 178         ${srcdir}/doc/pretex.m4      \
 179         ${srcdir}/doc/none.m4        \
 180         ${srcdir}/doc/all.m4         \
 181         ${srcdir}/doc/gdb.alter-m4   \
 182         ${srcdir}/doc/gdb.bugs-m4    \
 183         ${srcdir}/doc/gdb.canned-m4  \
 184         ${srcdir}/doc/gdb.cmds-m4    \
 185         ${srcdir}/doc/gdb.ctl-m4     \
 186         ${srcdir}/doc/gdb.data-m4    \
 187         ${srcdir}/doc/gdb.emacs-m4   \
 188         ${srcdir}/doc/gdb.files-m4   \
 189         ${srcdir}/doc/gdb.gpl-m4     \
 190         ${srcdir}/doc/gdb.install-m4 \
 191         ${srcdir}/doc/gdb.inv.m-m4   \
 192         ${srcdir}/doc/gdb.inv.s-m4   \
 193         ${srcdir}/doc/gdb.invoc-m4   \
 194         ${srcdir}/doc/gdb.rdln-m4    \
 195         ${srcdir}/doc/gdb.rename-m4  \
 196         ${srcdir}/doc/gdb.run-m4     \
 197         ${srcdir}/doc/gdb.sample-m4  \
 198         ${srcdir}/doc/gdb.src-m4     \
 199         ${srcdir}/doc/gdb.stack-m4   \
 200         ${srcdir}/doc/gdb.stop-m4    \
 201         ${srcdir}/doc/gdb.symb-m4    \
 202         ${srcdir}/doc/gdb.tgts-m4    \
 203         ${srcdir}/doc/gdb.top-m4
 204
 205 # Any additional files specified on these lines should also be added to
 206 # the OTHERS = definition below, so they go in the tar files.
 207 SFILES_STAND = $(SFILES) standalone.c
 208 SFILES_KGDB  = $(SFILES) stuff.c kdb-start.c
 209
 210 # Header files that are not named in tconfig/* or xconfig/* go here.
 211 HFILES= breakpoint.h command.h defs.h environ.h \
 212         expression.h frame.h gdbcmd.h gdbcore.h \
 213         getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
 214         signals.h signame.h symfile.h symtab.h \
 215         target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
 216         value.h
 217
 218 # Header files for machine opcode tables.
 219 # when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
 220 # business, since they will be included in the separate includes tar file
 221 # rather than in the gdb tar file.
 222 OPCODE_DIR =
 223 OPCODES = $(OPCODE_DIR)pn-opcode.h $(OPCODE_DIR)np1-opcode.h \
 224         $(OPCODE_DIR)sparc-opcode.h $(OPCODE_DIR)vax-opcode.h \
 225         $(OPCODE_DIR)m68k-opcode.h $(OPCODE_DIR)ns32k-opcode.h \
 226         $(OPCODE_DIR)convx-opcode.h $(OPCODE_DIR)pyr-opcode.h \
 227         $(OPCODE_DIR)mips-opcode.h $(OPCODE_DIR)am29k-opcode.h \
 228         $(OPCODE_DIR)arm-opcode.h $(OPCODE_DIR)m88k-opcode.h \
 229         $(OPCODE_DIR)tahoe-opcode.h
 230
 231 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar
 232
 233 MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
 234             ansidecl.h gmalloc.h
 235
 236 POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
 237 POSSLIBS = $(POSSLIBS_MAINDIR)
 238
 239 TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
 240
 241 # tdesc-lib cannot be named simply tdesc, because if it were, GNU make
 242 # would try to make it from tdesc.c.
 243 # tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
 244 OTHERS = Makefile Makefile.dist depend alldeps.mak Makefile.sdir \
 245          createtags munch config.gdb config.status \
 246          ChangeLog ChangeLog-3.x \
 247          README TODO TAGS WHATS.NEW Projects \
 248          .gdbinit COPYING expread.tab.c \
 249          copying.c Convex.notes copying.awk \
 250          saber.suppress standalone.c stuff.c kdb-start.c \
 251          putenv.c
 252
 253 # Subdirectories of gdb, which should be included in their entirety in
 254 # gdb-xxx.tar.Z:
 255 TARDIRS = doc hp-include # tests
 256
 257 DEPFILES= ${TDEPFILES} ${XDEPFILES}
 258
 259 SOURCES=$(SFILES) $(ALLDEPFILES)
 260 TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
 261 TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
 262              ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
 263 TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
 264
 265 OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
 266     values.o eval.o valops.o valarith.o valprint.o printcmd.o \
 267     symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
 268     command.o utils.o expread.o expprint.o environ.o version.o \
 269     copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
 270     inftarg.o ieee-float.o putenv.o \
 271     dbxread.o coffread.o # mipsread.o
 272
 273 RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
 274
 275 TSOBS = core.o inflow.o
 276
 277 NTSOBS = standalone.o
 278
 279 TSSTART = /lib/crt0.o
 280
 281 NTSSTART = kdb-start.o
 282
 283 # Prevent Sun make from putting in the machine type.  Setting
 284 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
 285 .c.o:
 286         ${CC} -c ${CFLAGS} $<
 287
 288 all: gdb
 289
 290 install: gdb
 291         cp gdb $(bindir)/gdb.new
 292         mv $(bindir)/gdb.new $(bindir)/gdb
 293         $(M_INSTALL)
 294
 295 init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS)
 296         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
 297
 298 gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
 299         ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
 300           $(CLIBS)
 301
 302 saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
 303         #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
 304         #load ./init.c $(SFILES)
 305         #unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
 306         #unload ${srcdir}/nindy-share/[A-Z]*
 307         #load ${srcdir}/expread.tab.c
 308         #load copying.c version.c
 309         #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
 310         #load ${LIBIBERTY_DIR}/*.c
 311         #load ${BFD_DIR}/*.c
 312         #load ${READLINE_DIR}/*.c
 313         #load -ltermcap
 314         ##void mcheck(a) void (*a)(); { }
 315         ##void mtrace() { }
 316
 317
 318
 319 # This is useful when debugging GDB, because some Unix's don't let you run GDB
 320 # on itself without copying the executable.  So "make gdb1" will make
 321 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
 322 # Removing gdb1 before the copy is the right thing if gdb1 is open
 323 # in another process.
 324 gdb1: gdb
 325         rm -f gdb1
 326         cp gdb gdb1
 327
 328 # This is a remote stub which runs under unix and starts up an
 329 # inferior process.  This is at least useful for debugging GDB's
 330 # remote support.
 331 rapp: $(RAPP_OBS)
 332         rm -f rapp_init.c
 333         ${srcdir}/munch ${RAPP_OBS} > rapp_init.c
 334         ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
 335
 336 # Support for building Makefile out of configured pieces, automatically
 337 # generated dependencies, etc.
 338 Makefiles= Makefile.sdir $(M_MAKEFILE) \
 339         ${srcdir}/alldeps.mak ${srcdir}/Makefile.dist
 340
 341 MAKE_MAKEFILE= echo "M_MAKEFILE=$(M_MAKEFILE)" | \
 342         cat - ${Makefiles} ${srcdir}/depend > Makefile
 343
 344 Makefile: $(Makefiles)
 345         $(MAKE_MAKEFILE)
 346
 347 alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
 348         rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
 349         for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
 350             ${srcdir}/xconfig/*[0-9A-Za-z] | \
 351             grep -v RCS | grep -v CVS.adm | grep -v SCCS` ; do \
 352           echo $$i >>allconfig.tmp; \
 353           awk <$$i ' \
 354             $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
 355               for (i = 2; i <= NF; i++) \
 356                 print $$i >> "alldeps.tmp" ; \
 357             } \
 358             $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
 359               print $$2 >> "allparam.tmp" }' ; \
 360         done
 361         sort <alldeps.tmp | uniq | \
 362           sed -e 's/arm-convert.o/arm-convert.s/' \
 363               -e 's!^Onindy.o!nindy-share/Onindy.c!' \
 364               -e 's!^nindy.o!nindy-share/nindy.c!' \
 365               -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
 366               -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
 367               -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
 368               -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
 369               -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
 370               -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
 371               -e 's/\.o/.c/' \
 372             >alldeps2.tmp
 373         echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
 374             >>alldeps.mak;
 375         grep -v / alldeps2.tmp | \
 376           awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
 377             NR == 0 {printf $$0;} \
 378             NR != 0 {printf "\\\n" $$0} \
 379             END {printf "\n\n"}' >>alldeps.mak;
 380         grep / alldeps2.tmp | \
 381           awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
 382             NR == 0 {printf $$0;} \
 383             NR != 0 {printf "\\\n" $$0} \
 384             END {printf "\n\n"}' >>alldeps.mak;
 385         sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
 386             NR == 0 {printf $$0;} \
 387             NR != 0 {printf "\\\n" $$0} \
 388             END {printf "\n\n"}' >>alldeps.mak;
 389         sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
 390             NR == 0 {printf $$0;} \
 391             NR != 0 {printf "\\\n" $$0} \
 392             END {printf "\n\n"}' >>alldeps.mak;
 393         rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
 394
 395 # The sed script makes everything which depends on {x,t}m.h depend on
 396 # config.status as well, in case someone reconfigures gdb out from
 397 # under an already compiled gdb.
 398 depend: $(SOURCES) Makefile.dist
 399         @echo Ignore errors about non-existent system-supplied include files
 400         @echo for systems other than the one you are using.
 401         @echo "If xm.h and tm.h don't exist, the error messages saying so"
 402         @echo can safely be ignored.
 403         @echo Also ignore parse errors in valops.c, and any errors in
 404         @echo arm-convert.s.
 405         -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
 406           `ls $(SOURCES) | grep -v \.h$$ |sort -u` >depend.tmp
 407         <depend.tmp sed -e 's/ [xt]m.h/& config.status/g'  \
 408           -e 's; vx-share/; $${srcdir}/vx-share/;g'  \
 409           -e 's; nindy-share/; $${srcdir}/nindy-share/;g'  \
 410           -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g'  \
 411           -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g'  \
 412           -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g'  \
 413           -e 's; \./; $${srcdir}/;g'  \
 414           >depend
 415         $(MAKE_MAKEFILE)
 416         rm depend.tmp
 417
 418 config.status:
 419         @echo "You must configure gdb.  Look at the README file for details."
 420         @false
 421
 422 # These are not generated by "make depend" because they only are there
 423 # for some machines.
 424 # But these rules don't do what we want; we want to hack the foo.o: tm.h
 425 # dependency to do the right thing.
 426 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
 427 tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
 428 xm-news1000.h : xm-news.h
 429 xm-i386-sv32.h : xm-i386.h
 430 tm-i386gas.h: tm-i386.h
 431 xm-sun4os4.h : xm-sparc.h
 432 tm-sun4os4.h : tm-sparc.h
 433
 434 kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
 435         rm -f init.c
 436         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
 437         $(CC) $(LDFLAGS) -c init.c $(CLIBS)
 438         ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
 439           -lc $(CLIBS)
 440
 441 # Put the proper machine-specific files first.
 442 # createtags will edit the .o in DEPFILES into .c
 443 TAGS: ${TAGFILES}
 444         $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
 445 tags: TAGS
 446
 447 # FIXME: Get alldeps.mak up to date, config.gdb none, THEN make gdb.tar.Z!
 448 gdb.tar.Z: ${TARFILES} ${TARDIRS}
 449         rm -f gdb.tar; rm -rf $(DIST)
 450         mkdir $(DIST)
 451         cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
 452         cd $(DIST); for i in ${TARDIRS}; do \
 453           (mkdir $$i; cd $$i; \
 454           ln -s ../../$$i/* .; \
 455           rm -rf SCCS CVS.adm RCS); done
 456         mkdir $(DIST)/xconfig ${DIST}/tconfig
 457         cd $(DIST)/tconfig ; \
 458           for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
 459         mkdir $(DIST)/vx-share $(DIST)/nindy-share
 460         cd $(DIST)/tconfig ; \
 461           for i in $(SFILES_SUBDIR) $(ALLDEPFILES_SUBDIR); \
 462             do ln -s ../../$$i ../$$i ; done
 463         tar chf - $(DIST) | compress >gdb.tar.Z
 464         rm -rf $(DIST)
 465
 466 clean:
 467         rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
 468         rm -f init.c init.o version.c
 469         rm -f gdb core gdb.tar gdb.tar.Z make.log
 470         rm -f gdb[0-9]
 471         rm -f gdb.dvi rdl-apps.texinfo gdb-all*
 472
 473 distclean: clean expread.tab.c TAGS
 474         rm -f tm.h xm.h config.status
 475         rm -f y.output yacc.acts yacc.tmp
 476         rm -f ${TESTS} Makefile
 477
 478 realclean: clean
 479         rm -f expread.tab.c TAGS
 480         rm -f tm.h xm.h config.status
 481         rm -f Makefile
 482
 483 rdl-apps.texinfo: ${READLINE_DIR}/inc-readline.texinfo \
 484                         ${READLINE_DIR}/inc-history.texinfo
 485         echo "@include ${READLINE_DIR}/inc-readline.texinfo" >rdl-apps.texinfo
 486         echo "@include ${READLINE_DIR}/inc-history.texinfo" >>rdl-apps.texinfo
 487
 488 gdb-all.texinfo: ${SFILES_DOCDIR}
 489         ( cd $(srcdir)/doc; \
 490                 ${M4} pretex.m4 none.m4 all.m4 gdb.texinfo ) >gdb-all.texinfo
 491
 492 gdb.dvi : gdb-all.texinfo rdl-apps.texinfo
 493         TEXINPUTS=${TEXIDIR}:$$TEXINPUTS tex gdb-all.texinfo
 494         texindex gdb-all.??
 495         TEXINPUTS=${TEXIDIR}:$$TEXINPUTS tex gdb-all.texinfo
 496         mv gdb-all.dvi gdb.dvi
 497         rm -f gdb-all.?? gdb-all.???
 498
 499 # This should work eventually, but we're using texinfo2, and many makeinfo's
 500 # can't cope with all the markup.  In the meantime, we distribute the info
 501 # files as formatted by the elisp texinfo2 code.
 502 #gdb.info: gdb-all.texinfo
 503 #       makeinfo gdb-all.texinfo
 504
 505 # Make copying.c from COPYING
 506 copying.c : COPYING copying.awk
 507         awk -f copying.awk < COPYING > copying.c
 508
 509 version.c : Makefile.dist
 510         echo 'char *version = "$(VERSION)";' >version.c
 511
 512 ${srcdir}/expread.tab.c : $(srcdir)/expread.y
 513         @echo 'Expect 4 shift/reduce conflict.'
 514         ${YACC} $(srcdir)/expread.y
 515         mv y.tab.c ${srcdir}/expread.tab.c
 516
 517 expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \
 518             frame.h expression.h
 519         $(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
 520         mv expread.tab.o expread.o
 521
 522 # dbxread, coffread, mipsread have dependencies on BFD header files.
 523 dbxread.o: ${srcdir}/dbxread.c
 524         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
 525
 526 coffread.o: ${srcdir}/coffread.c
 527         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
 528
 529 mipsread.o: ${srcdir}/mipsread.c
 530         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
 531
 532 # Drag in the files that are in another directory.
 533
 534 xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
 535         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
 536
 537 xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
 538         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
 539
 540 xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
 541         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
 542
 543 xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
 544         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
 545
 546 nindy.o: ${srcdir}/nindy-share/nindy.c
 547         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
 548
 549 Onindy.o: ${srcdir}/nindy-share/Onindy.c
 550         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
 551
 552 ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
 553         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
 554
 555 ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
 556         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
 557
 558 tdesc-lib/libdc.o : force_update
 559         cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
 560
 561 lint: $(LINTFILES)
 562         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
 563
 564 gdb.cxref: $(SFILES)
 565         cxref -I. $(SFILES) >gdb.cxref
 566
 567 force_update :
 568
 569 # When used with GDB, the demangler should never look for leading
 570 # underscores because GDB strips them off during symbol read-in.  Thus
 571 # -Dnounderscore.
 572
 573 cplus-dem.o : cplus-dem.c
 574         ${CC} -c ${CFLAGS} -Dnounderscore \
 575           `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`